heimdal: Vendor import f62e2f278vendor/heimdal/7.8.0-2023-06-10-f62e2f278vendor/heimdal

Heimdal 7.8.0 does not support OpenSSL 3.0. 7.9.0 will but it hasn't
been released yet. We are importing f62e2f278 for its OpenSSL 3.0
support.

4 files changed, 1865 insertions, 0 deletions

diff --git a/lib/libedit/doc/Makefile.am b/lib/libedit/doc/Makefile.am
new file mode 100644
index 000000000000..dfdf841b659b
--- /dev/null
+++ b/lib/libedit/doc/Makefile.am
@@ -0,0 +1,33 @@
+
+EL_MANS = editline.3 editrc.5
+
+man_MANS = $(EL_MANS)
+
+EL_MAN_LINKS = el_init.3 el_end.3 el_reset.3 el_gets.3 el_getc.3 \
+	       el_push.3 el_parse.3 el_set.3 el_get.3 el_source.3 \
+	       el_resize.3 el_line.3 el_insertstr.3 el_deletestr.3 \
+	       el_history_init.3 el_history_end.3 el_history.3 el_tok_init.3 \
+	       el_tok_end.3 el_tok_reset.3 el_tok_line.3 el_tok_str.3
+
+install-data-hook: $(EL_MAN_LINKS)
+
+$(EL_MAN_LINKS):
+	(cd $(DESTDIR)$(man3dir) && rm -f $@ && $(LN_S) editline.3 $@)
+
+$(EL_MANS):
+	@if test "$(MANTYPE)" = "mdoc"; then\
+	   cp $(srcdir)/$@.roff $@;\
+        else\
+	   $(AWK) -f $(srcdir)/mdoc2man.awk $(srcdir)/$@.roff > $@ || rm -f $@;\
+	fi; 
+
+uninstall-local: 
+	(cd $(DESTDIR)$(man3dir) && rm -f $(EL_MAN_LINKS))
+
+CLEANFILES = $(EL_MANS)
+EXTRA_DIST = editline.3.roff editrc.5.roff mdoc2man.awk
+
+changelog.txt: ../ChangeLog
+	@sed 's/@/ (at)/g; s/&/\&amp;/g; s/</\&lt;/g; s/>/\&gt;/g;' $(srcdir)/$< > $@;
+
+
diff --git a/lib/libedit/doc/editline.3.roff b/lib/libedit/doc/editline.3.roff
new file mode 100644
index 000000000000..9fe455d61a90
--- /dev/null
+++ b/lib/libedit/doc/editline.3.roff
@@ -0,0 +1,883 @@
+.\"	$NetBSD: editline.3,v 1.74 2010/12/16 17:42:28 wiz Exp $
+.\"
+.\" Copyright (c) 1997-2003 The NetBSD Foundation, Inc.
+.\" All rights reserved.
+.\"
+.\" This file was contributed to The NetBSD Foundation by Luke Mewburn.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd January 3, 2010
+.Dt EDITLINE 3
+.Os
+.Sh NAME
+.Nm editline ,
+.Nm el_init ,
+.Nm el_end ,
+.Nm el_reset ,
+.Nm el_gets ,
+.Nm el_wgets ,
+.Nm el_getc ,
+.Nm el_wgetc ,
+.Nm el_push ,
+.Nm el_wpush ,
+.Nm el_parse ,
+.Nm el_wparse ,
+.Nm el_set ,
+.Nm el_wset ,
+.Nm el_get ,
+.Nm el_wget ,
+.Nm el_source ,
+.Nm el_resize ,
+.Nm el_line ,
+.Nm el_wline ,
+.Nm el_insertstr ,
+.Nm el_winsertstr ,
+.Nm el_deletestr ,
+.Nm el_wdeletestr ,
+.Nm history_init ,
+.Nm history_winit ,
+.Nm history_end ,
+.Nm history_wend ,
+.Nm history ,
+.Nm history_w ,
+.Nm tok_init ,
+.Nm tok_winit ,
+.Nm tok_end ,
+.Nm tok_wend ,
+.Nm tok_reset ,
+.Nm tok_wreset ,
+.Nm tok_line ,
+.Nm tok_wline ,
+.Nm tok_str
+.Nm tok_wstr
+.Nd line editor, history and tokenization functions
+.Sh LIBRARY
+.Lb libedit
+.Sh SYNOPSIS
+.In histedit.h
+.Ft EditLine *
+.Fn el_init "const char *prog" "FILE *fin" "FILE *fout" "FILE *ferr"
+.Ft void
+.Fn el_end "EditLine *e"
+.Ft void
+.Fn el_reset "EditLine *e"
+.Ft const char *
+.Fn el_gets "EditLine *e" "int *count"
+.Ft const wchar_t *
+.Fn el_wgets "EditLine *e" "int *count"
+.Ft int
+.Fn el_getc "EditLine *e" "char *ch"
+.Ft int
+.Fn el_wgetc "EditLine *e" "wchar_t *ch"
+.Ft void
+.Fn el_push "EditLine *e" "const char *str"
+.Ft void
+.Fn el_wpush "EditLine *e" "const wchar_t *str"
+.Ft int
+.Fn el_parse "EditLine *e" "int argc" "const char *argv[]"
+.Ft int
+.Fn el_wparse "EditLine *e" "int argc" "const wchar_t *argv[]"
+.Ft int
+.Fn el_set "EditLine *e" "int op" "..."
+.Ft int
+.Fn el_wset "EditLine *e" "int op" "..."
+.Ft int
+.Fn el_get "EditLine *e" "int op" "..."
+.Ft int
+.Fn el_wget "EditLine *e" "int op" "..."
+.Ft int
+.Fn el_source "EditLine *e" "const char *file"
+.Ft void
+.Fn el_resize "EditLine *e"
+.Ft const LineInfo *
+.Fn el_line "EditLine *e"
+.Ft int
+.Fn el_insertstr "EditLine *e" "const char *str"
+.Ft int
+.Fn el_winsertstr "EditLine *e" "const wchar_t *str"
+.Ft void
+.Fn el_deletestr "EditLine *e" "int count"
+.Ft void
+.Fn el_wdeletestr "EditLine *e" "int count"
+.Ft History *
+.Fn history_init
+.Ft HistoryW *
+.Fn history_winit
+.Ft void
+.Fn history_end "History *h"
+.Ft void
+.Fn history_wend "HistoryW *h"
+.Ft int
+.Fn history "History *h" "HistEvent *ev" "int op" "..."
+.Ft int
+.Fn history_w "HistoryW *h" "HistEventW *ev" "int op" "..."
+.Ft Tokenizer *
+.Fn tok_init "const char *IFS"
+.Ft TokenizerW *
+.Fn tok_winit "const wchar_t *IFS"
+.Ft void
+.Fn tok_end "Tokenizer *t"
+.Ft void
+.Fn tok_wend "TokenizerW *t"
+.Ft void
+.Fn tok_reset "Tokenizer *t"
+.Ft void
+.Fn tok_wreset "TokenizerW *t"
+.Ft int
+.Fn tok_line "Tokenizer *t" "const LineInfo *li" "int *argc" "const char **argv[]" "int *cursorc" "int *cursoro"
+.Ft int
+.Fn tok_wline "TokenizerW *t" "const LineInfoW *li" "int *argc" "const wchar_t **argv[]" "int *cursorc" "int *cursoro"
+.Ft int
+.Fn tok_str "Tokenizer *t" "const char *str" "int *argc" "const char **argv[]"
+.Ft int
+.Fn tok_wstr "TokenizerW *t" "const wchar_t *str" "int *argc" "const wchar_t **argv[]"
+.Sh DESCRIPTION
+The
+.Nm
+library provides generic line editing, history and tokenization functions,
+similar to those found in
+.Xr sh 1 .
+.Pp
+These functions are available in the
+.Nm libedit
+library (which needs the
+.Nm libtermcap
+library).
+Programs should be linked with
+.Fl ledit ltermcap .
+.Sh LINE EDITING FUNCTIONS
+The line editing functions use a common data structure,
+.Fa EditLine ,
+which is created by
+.Fn el_init
+and freed by
+.Fn el_end .
+.Pp
+The wide-character functions behave the same way as their narrow
+counterparts.
+.Pp
+The following functions are available:
+.Bl -tag -width 4n
+.It Fn el_init
+Initialise the line editor, and return a data structure
+to be used by all other line editing functions.
+.Fa prog
+is the name of the invoking program, used when reading the
+.Xr editrc 5
+file to determine which settings to use.
+.Fa fin ,
+.Fa fout
+and
+.Fa ferr
+are the input, output, and error streams (respectively) to use.
+In this documentation, references to
+.Dq the tty
+are actually to this input/output stream combination.
+.It Fn el_end
+Clean up and finish with
+.Fa e ,
+assumed to have been created with
+.Fn el_init .
+.It Fn el_reset
+Reset the tty and the parser.
+This should be called after an error which may have upset the tty's
+state.
+.It Fn el_gets
+Read a line from the tty.
+.Fa count
+is modified to contain the number of characters read.
+Returns the line read if successful, or
+.Dv NULL
+if no characters were read or if an error occurred.
+If an error occurred,
+.Fa count
+is set to \-1 and
+.Dv errno
+contains the error code that caused it.
+The return value may not remain valid across calls to
+.Fn el_gets
+and must be copied if the data is to be retained.
+.It Fn el_getc
+Read a character from the tty.
+.Fa ch
+is modified to contain the character read.
+Returns the number of characters read if successful, \-1 otherwise.
+.It Fn el_push
+Pushes
+.Fa str
+back onto the input stream.
+This is used by the macro expansion mechanism.
+Refer to the description of
+.Ic bind
+.Fl s
+in
+.Xr editrc 5
+for more information.
+.It Fn el_parse
+Parses the
+.Fa argv
+array (which is
+.Fa argc
+elements in size)
+to execute builtin
+.Nm
+commands.
+If the command is prefixed with
+.Dq prog :
+then
+.Fn el_parse
+will only execute the command if
+.Dq prog
+matches the
+.Fa prog
+argument supplied to
+.Fn el_init .
+The return value is
+\-1 if the command is unknown,
+0 if there was no error or
+.Dq prog
+didn't match, or
+1 if the command returned an error.
+Refer to
+.Xr editrc 5
+for more information.
+.It Fn el_set
+Set
+.Nm
+parameters.
+.Fa op
+determines which parameter to set, and each operation has its
+own parameter list.
+.Pp
+The following values for
+.Fa op
+are supported, along with the required argument list:
+.Bl -tag -width 4n
+.It Dv EL_PROMPT , Fa "char *(*f)(EditLine *)"
+Define prompt printing function as
+.Fa f ,
+which is to return a string that contains the prompt.
+.It Dv EL_PROMPT_ESC , Fa "char *(*f)(EditLine *)" , Fa "char c"
+Same as
+.Dv EL_PROMPT ,
+but the
+.Fa c
+argument indicates the start/stop literal prompt character.
+.Pp
+If a start/stop literal character is found in the prompt, the
+character itself
+is not printed, but characters after it are printed directly to the
+terminal without affecting the state of the current line.
+A subsequent second start/stop literal character ends this behavior.
+This is typically used to embed literal escape sequences that change the
+color/style of the terminal in the prompt.
+.Dv 0
+unsets it.
+.It Dv EL_REFRESH
+Re-display the current line on the next terminal line.
+.It Dv EL_RPROMPT , Fa "char *(*f)(EditLine *)"
+Define right side prompt printing function as
+.Fa f ,
+which is to return a string that contains the prompt.
+.It Dv EL_RPROMPT_ESC , Fa "char *(*f)(EditLine *)" , Fa "char c"
+Define the right prompt printing function but with a literal escape character.
+.It Dv EL_TERMINAL , Fa "const char *type"
+Define terminal type of the tty to be
+.Fa type ,
+or to
+.Ev TERM
+if
+.Fa type
+is
+.Dv NULL .
+.It Dv EL_EDITOR , Fa "const char *mode"
+Set editing mode to
+.Fa mode ,
+which must be one of
+.Dq emacs
+or
+.Dq vi .
+.It Dv EL_SIGNAL , Fa "int flag"
+If
+.Fa flag
+is non-zero,
+.Nm
+will install its own signal handler for the following signals when
+reading command input:
+.Dv SIGCONT ,
+.Dv SIGHUP ,
+.Dv SIGINT ,
+.Dv SIGQUIT ,
+.Dv SIGSTOP ,
+.Dv SIGTERM ,
+.Dv SIGTSTP ,
+and
+.Dv SIGWINCH .
+Otherwise, the current signal handlers will be used.
+.It Dv EL_BIND , Fa "const char *" , Fa "..." , Dv NULL
+Perform the
+.Ic bind
+builtin command.
+Refer to
+.Xr editrc 5
+for more information.
+.It Dv EL_ECHOTC , Fa "const char *" , Fa "..." , Dv NULL
+Perform the
+.Ic echotc
+builtin command.
+Refer to
+.Xr editrc 5
+for more information.
+.It Dv EL_SETTC , Fa "const char *" , Fa "..." , Dv NULL
+Perform the
+.Ic settc
+builtin command.
+Refer to
+.Xr editrc 5
+for more information.
+.It Dv EL_SETTY , Fa "const char *" , Fa "..." , Dv NULL
+Perform the
+.Ic setty
+builtin command.
+Refer to
+.Xr editrc 5
+for more information.
+.It Dv EL_TELLTC , Fa "const char *" , Fa "..." , Dv NULL
+Perform the
+.Ic telltc
+builtin command.
+Refer to
+.Xr editrc 5
+for more information.
+.It Dv EL_ADDFN , Fa "const char *name" , Fa "const char *help" , \
+Fa "unsigned char (*func)(EditLine *e, int ch)"
+Add a user defined function,
+.Fn func ,
+referred to as
+.Fa name
+which is invoked when a key which is bound to
+.Fa name
+is entered.
+.Fa help
+is a description of
+.Fa name .
+At invocation time,
+.Fa ch
+is the key which caused the invocation.
+The return value of
+.Fn func
+should be one of:
+.Bl -tag -width "CC_REDISPLAY"
+.It Dv CC_NORM
+Add a normal character.
+.It Dv CC_NEWLINE
+End of line was entered.
+.It Dv CC_EOF
+EOF was entered.
+.It Dv CC_ARGHACK
+Expecting further command input as arguments, do nothing visually.
+.It Dv CC_REFRESH
+Refresh display.
+.It Dv CC_REFRESH_BEEP
+Refresh display, and beep.
+.It Dv CC_CURSOR
+Cursor moved, so update and perform
+.Dv CC_REFRESH .
+.It Dv CC_REDISPLAY
+Redisplay entire input line.
+This is useful if a key binding outputs extra information.
+.It Dv CC_ERROR
+An error occurred.
+Beep, and flush tty.
+.It Dv CC_FATAL
+Fatal error, reset tty to known state.
+.El
+.It Dv EL_HIST , Fa "History *(*func)(History *, int op, ...)" , \
+Fa "const char *ptr"
+Defines which history function to use, which is usually
+.Fn history .
+.Fa ptr
+should be the value returned by
+.Fn history_init .
+.It Dv EL_EDITMODE , Fa "int flag"
+If
+.Fa flag
+is non-zero,
+editing is enabled (the default).
+Note that this is only an indication, and does not
+affect the operation of
+.Nm .
+At this time, it is the caller's responsibility to
+check this
+(using
+.Fn el_get )
+to determine if editing should be enabled or not.
+.It Dv EL_GETCFN , Fa "int (*f)(EditLine *, char *c)"
+Define the character reading function as
+.Fa f ,
+which is to return the number of characters read and store them in
+.Fa c .
+This function is called internally by
+.Fn el_gets
+and
+.Fn el_getc .
+The builtin function can be set or restored with the special function
+name
+.Dq Dv EL_BUILTIN_GETCFN .
+.It Dv EL_CLIENTDATA , Fa "void *data"
+Register
+.Fa data
+to be associated with this EditLine structure.
+It can be retrieved with the corresponding
+.Fn el_get
+call.
+.It Dv EL_SETFP , Fa "int fd" , Fa "FILE *fp"
+Set the current
+.Nm editline
+file pointer for
+.Dq input
+.Fa fd
+=
+.Dv 0 ,
+.Dq output
+.Fa fd
+=
+.Dv 1 ,
+or
+.Dq error
+.Fa fd
+=
+.Dv 2
+from
+.Fa fp .
+.El
+.It Fn el_get
+Get
+.Nm
+parameters.
+.Fa op
+determines which parameter to retrieve into
+.Fa result .
+Returns 0 if successful, \-1 otherwise.
+.Pp
+The following values for
+.Fa op
+are supported, along with actual type of
+.Fa result :
+.Bl -tag -width 4n
+.It Dv EL_PROMPT , Fa "char *(*f)(EditLine *)" , Fa "char *c"
+Return a pointer to the function that displays the prompt in
+.Fa f .
+If
+.Fa c
+is not
+.Dv NULL ,
+return the start/stop literal prompt character in it.
+.It Dv EL_RPROMPT , Fa "char *(*f)(EditLine *)" , Fa "char *c"
+Return a pointer to the function that displays the prompt in
+.Fa f .
+If
+.Fa c
+is not
+.Dv NULL ,
+return the start/stop literal prompt character in it.
+.It Dv EL_EDITOR , Fa "const char **"
+Return the name of the editor, which will be one of
+.Dq emacs
+or
+.Dq vi .
+.It Dv EL_GETTC , Fa "const char *name" , Fa "void *value"
+Return non-zero if
+.Fa name
+is a valid
+.Xr termcap 5
+capability
+and set
+.Fa value
+to the current value of that capability.
+.It Dv EL_SIGNAL , Fa "int *"
+Return non-zero if
+.Nm
+has installed private signal handlers (see
+.Fn el_get
+above).
+.It Dv EL_EDITMODE , Fa "int *"
+Return non-zero if editing is enabled.
+.It Dv EL_GETCFN , Fa "int (**f)(EditLine *, char *)"
+Return a pointer to the function that read characters, which is equal to
+.Dq Dv EL_BUILTIN_GETCFN
+in the case of the default builtin function.
+.It Dv EL_CLIENTDATA , Fa "void **data"
+Retrieve
+.Fa data
+previously registered with the corresponding
+.Fn el_set
+call.
+.It Dv EL_UNBUFFERED , Fa "int"
+Sets or clears unbuffered mode.
+In this mode,
+.Fn el_gets
+will return immediately after processing a single character.
+.It Dv EL_PREP_TERM , Fa "int"
+Sets or clears terminal editing mode.
+.It Dv EL_GETFP , Fa "int fd", Fa "FILE **fp"
+Return in
+.Fa fp
+the current
+.Nm editline
+file pointer for
+.Dq input
+.Fa fd
+=
+.Dv 0 ,
+.Dq output
+.Fa fd
+=
+.Dv 1 ,
+or
+.Dq error
+.Fa fd
+=
+.Dv 2 .
+.El
+.It Fn el_source
+Initialise
+.Nm
+by reading the contents of
+.Fa file .
+.Fn el_parse
+is called for each line in
+.Fa file .
+If
+.Fa file
+is
+.Dv NULL ,
+try
+.Pa $PWD/.editrc
+then
+.Pa $HOME/.editrc .
+Refer to
+.Xr editrc 5
+for details on the format of
+.Fa file .
+.It Fn el_resize
+Must be called if the terminal size changes.
+If
+.Dv EL_SIGNAL
+has been set with
+.Fn el_set ,
+then this is done automatically.
+Otherwise, it's the responsibility of the application to call
+.Fn el_resize
+on the appropriate occasions.
+.It Fn el_line
+Return the editing information for the current line in a
+.Fa LineInfo
+structure, which is defined as follows:
+.Bd -literal
+typedef struct lineinfo {
+    const char *buffer;    /* address of buffer */
+    const char *cursor;    /* address of cursor */
+    const char *lastchar;  /* address of last character */
+} LineInfo;
+.Ed
+.Pp
+.Fa buffer
+is not NUL terminated.
+This function may be called after
+.Fn el_gets
+to obtain the
+.Fa LineInfo
+structure pertaining to line returned by that function,
+and from within user defined functions added with
+.Dv EL_ADDFN .
+.It Fn el_insertstr
+Insert
+.Fa str
+into the line at the cursor.
+Returns \-1 if
+.Fa str
+is empty or won't fit, and 0 otherwise.
+.It Fn el_deletestr
+Delete
+.Fa count
+characters before the cursor.
+.El
+.Sh HISTORY LIST FUNCTIONS
+The history functions use a common data structure,
+.Fa History ,
+which is created by
+.Fn history_init
+and freed by
+.Fn history_end .
+.Pp
+The following functions are available:
+.Bl -tag -width 4n
+.It Fn history_init
+Initialise the history list, and return a data structure
+to be used by all other history list functions.
+.It Fn history_end
+Clean up and finish with
+.Fa h ,
+assumed to have been created with
+.Fn history_init .
+.It Fn history
+Perform operation
+.Fa op
+on the history list, with optional arguments as needed by the
+operation.
+.Fa ev
+is changed accordingly to operation.
+The following values for
+.Fa op
+are supported, along with the required argument list:
+.Bl -tag -width 4n
+.It Dv H_SETSIZE , Fa "int size"
+Set size of history to
+.Fa size
+elements.
+.It Dv H_GETSIZE
+Get number of events currently in history.
+.It Dv H_END
+Cleans up and finishes with
+.Fa h ,
+assumed to be created with
+.Fn history_init .
+.It Dv H_CLEAR
+Clear the history.
+.It Dv H_FUNC , Fa "void *ptr" , Fa "history_gfun_t first" , \
+Fa "history_gfun_t next" , Fa "history_gfun_t last" , \
+Fa "history_gfun_t prev" , Fa "history_gfun_t curr" , \
+Fa "history_sfun_t set" , Fa "history_vfun_t clear" , \
+Fa "history_efun_t enter" , Fa "history_efun_t add"
+Define functions to perform various history operations.
+.Fa ptr
+is the argument given to a function when it's invoked.
+.It Dv H_FIRST
+Return the first element in the history.
+.It Dv H_LAST
+Return the last element in the history.
+.It Dv H_PREV
+Return the previous element in the history.
+.It Dv H_NEXT
+Return the next element in the history.
+.It Dv H_CURR
+Return the current element in the history.
+.It Dv H_SET
+Set the cursor to point to the requested element.
+.It Dv H_ADD , Fa "const char *str"
+Append
+.Fa str
+to the current element of the history, or perform the
+.Dv H_ENTER
+operation with argument
+.Fa str
+if there is no current element.
+.It Dv H_APPEND , Fa "const char *str"
+Append
+.Fa str
+to the last new element of the history.
+.It Dv H_ENTER , Fa "const char *str"
+Add
+.Fa str
+as a new element to the history, and, if necessary,
+removing the oldest entry to keep the list to the created size.
+If
+.Dv H_SETUNIQUE
+was has been called with a non-zero arguments, the element
+will not be entered into the history if its contents match
+the ones of the current history element.
+If the element is entered
+.Fn history
+returns 1, if it is ignored as a duplicate returns 0.
+Finally
+.Fn history
+returns \-1 if an error occurred.
+.It Dv H_PREV_STR , Fa "const char *str"
+Return the closest previous event that starts with
+.Fa str .
+.It Dv H_NEXT_STR , Fa "const char *str"
+Return the closest next event that starts with
+.Fa str .
+.It Dv H_PREV_EVENT , Fa "int e"
+Return the previous event numbered
+.Fa e .
+.It Dv H_NEXT_EVENT , Fa "int e"
+Return the next event numbered
+.Fa e .
+.It Dv H_LOAD , Fa "const char *file"
+Load the history list stored in
+.Fa file .
+.It Dv H_SAVE , Fa "const char *file"
+Save the history list to
+.Fa file .
+.It Dv H_SETUNIQUE , Fa "int unique"
+Set flag that adjacent identical event strings should not be entered
+into the history.
+.It Dv H_GETUNIQUE
+Retrieve the current setting if adjacent identical elements should
+be entered into the history.
+.It Dv H_DEL , Fa "int e"
+Delete the event numbered
+.Fa e .
+This function is only provided for
+.Xr readline 3
+compatibility.
+The caller is responsible for free'ing the string in the returned
+.Fa HistEvent .
+.El
+.Pp
+.Fn history
+returns \*[Gt]= 0 if the operation
+.Fa op
+succeeds.
+Otherwise, \-1 is returned and
+.Fa ev
+is updated to contain more details about the error.
+.El
+.Sh TOKENIZATION FUNCTIONS
+The tokenization functions use a common data structure,
+.Fa Tokenizer ,
+which is created by
+.Fn tok_init
+and freed by
+.Fn tok_end .
+.Pp
+The following functions are available:
+.Bl -tag -width 4n
+.It Fn tok_init
+Initialise the tokenizer, and return a data structure
+to be used by all other tokenizer functions.
+.Fa IFS
+contains the Input Field Separators, which defaults to
+.Aq space ,
+.Aq tab ,
+and
+.Aq newline
+if
+.Dv NULL .
+.It Fn tok_end
+Clean up and finish with
+.Fa t ,
+assumed to have been created with
+.Fn tok_init .
+.It Fn tok_reset
+Reset the tokenizer state.
+Use after a line has been successfully tokenized
+by
+.Fn tok_line
+or
+.Fn tok_str
+and before a new line is to be tokenized.
+.It Fn tok_line
+Tokenize
+.Fa li ,
+If successful, modify:
+.Fa argv
+to contain the words,
+.Fa argc
+to contain the number of words,
+.Fa cursorc
+(if not
+.Dv NULL )
+to contain the index of the word containing the cursor,
+and
+.Fa cursoro
+(if not
+.Dv NULL )
+to contain the offset within
+.Fa argv[cursorc]
+of the cursor.
+.Pp
+Returns
+0 if successful,
+\-1 for an internal error,
+1 for an unmatched single quote,
+2 for an unmatched double quote,
+and
+3 for a backslash quoted
+.Aq newline .
+A positive exit code indicates that another line should be read
+and tokenization attempted again.
+.
+.It Fn tok_str
+A simpler form of
+.Fn tok_line ;
+.Fa str
+is a NUL terminated string to tokenize.
+.El
+.
+.\"XXX.Sh EXAMPLES
+.\"XXX: provide some examples
+.Sh SEE ALSO
+.Xr sh 1 ,
+.Xr signal 3 ,
+.Xr termcap 3 ,
+.Xr editrc 5 ,
+.Xr termcap 5
+.Sh HISTORY
+The
+.Nm
+library first appeared in
+.Bx 4.4 .
+.Dv CC_REDISPLAY
+appeared in
+.Nx 1.3 .
+.Dv CC_REFRESH_BEEP ,
+.Dv EL_EDITMODE
+and the readline emulation appeared in
+.Nx 1.4 .
+.Dv EL_RPROMPT
+appeared in
+.Nx 1.5 .
+.Sh AUTHORS
+The
+.Nm
+library was written by Christos Zoulas.
+Luke Mewburn wrote this manual and implemented
+.Dv CC_REDISPLAY ,
+.Dv CC_REFRESH_BEEP ,
+.Dv EL_EDITMODE ,
+and
+.Dv EL_RPROMPT .
+Jaromir Dolecek implemented the readline emulation.
+Johny Mattsson implemented wide-character support.
+.Sh BUGS
+At this time, it is the responsibility of the caller to
+check the result of the
+.Dv EL_EDITMODE
+operation of
+.Fn el_get
+(after an
+.Fn el_source
+or
+.Fn el_parse )
+to determine if
+.Nm
+should be used for further input.
+I.e.,
+.Dv EL_EDITMODE
+is purely an indication of the result of the most recent
+.Xr editrc 5
+.Ic edit
+command.
diff --git a/lib/libedit/doc/editrc.5.roff b/lib/libedit/doc/editrc.5.roff
new file mode 100644
index 000000000000..44ab99d2d5fa
--- /dev/null
+++ b/lib/libedit/doc/editrc.5.roff
@@ -0,0 +1,490 @@
+.\"	$NetBSD: editrc.5,v 1.24 2009/04/11 22:17:52 wiz Exp $
+.\"
+.\" Copyright (c) 1997-2000 The NetBSD Foundation, Inc.
+.\" All rights reserved.
+.\"
+.\" This file was contributed to The NetBSD Foundation by Luke Mewburn.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+.\" PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+.\" POSSIBILITY OF SUCH DAMAGE.
+.\"
+.Dd October 18, 2003
+.Dt EDITRC 5
+.Os
+.Sh NAME
+.Nm editrc
+.Nd configuration file for editline library
+.Sh SYNOPSIS
+.Nm
+.Sh DESCRIPTION
+The
+.Nm
+file defines various settings to be used by the
+.Xr editline 3
+library.
+.Pp
+The format of each line is:
+.Dl [prog:]command [arg [...]]
+.Pp
+.Ar command
+is one of the
+.Xr editline 3
+builtin commands.
+Refer to
+.Sx BUILTIN COMMANDS
+for more information.
+.Pp
+.Ar prog
+is the program name string that a program defines when it calls
+.Xr el_init 3
+to set up
+.Xr editline 3 ,
+which is usually
+.Va argv[0] .
+.Ar command
+will be executed for any program which matches
+.Ar prog .
+.Pp
+.Ar prog
+may also be a
+.Xr regex 3
+style
+regular expression, in which case
+.Ar command
+will be executed for any program that matches the regular expression.
+.Pp
+If
+.Ar prog
+is absent,
+.Ar command
+is executed for all programs.
+.Sh BUILTIN COMMANDS
+The
+.Nm editline
+library has some builtin commands, which affect the way
+that the line editing and history functions operate.
+These are based on similar named builtins present in the
+.Xr tcsh 1
+shell.
+.Pp
+The following builtin commands are available:
+.Bl -tag -width 4n
+.It Ic bind Oo Fl a Oc Oo Fl e Oc Oo Fl k Oc Oo Fl l Oc Oo Fl r Oc \
+Oo Fl s Oc Oo Fl v Oc Oo Ar key Op Ar command Oc
+Without options, list all bound keys, and the editor command to which
+each is bound.
+If
+.Ar key
+is supplied, show the bindings for
+.Ar key .
+If
+.Ar key command
+is supplied, bind
+.Ar command
+to
+.Ar key .
+Options include:
+.Bl -tag -width 4n
+.It Fl e
+Bind all keys to the standard GNU Emacs-like bindings.
+.It Fl v
+Bind all keys to the standard
+.Xr vi 1 Ns -like
+bindings.
+.It Fl a
+List or change key bindings in the
+.Xr vi 1
+mode alternate (command mode) key map.
+.It Fl k
+.Ar key
+is interpreted as a symbolic arrow key name, which may be one of
+.Sq up ,
+.Sq down ,
+.Sq left
+or
+.Sq right .
+.It Fl l
+List all editor commands and a short description of each.
+.It Fl r
+Remove a key's binding.
+.It Fl s
+.Ar command
+is taken as a literal string and treated as terminal input when
+.Ar key
+is typed.
+Bound keys in
+.Ar command
+are themselves reinterpreted, and this continues for ten levels of
+interpretation.
+.El
+.Pp
+.Ar command
+may be one of the commands documented in
+.Sx "EDITOR COMMANDS"
+below, or another key.
+.Pp
+.Ar key
+and
+.Ar command
+can contain control characters of the form
+.Sm off
+.Sq No ^ Ar character
+.Sm on
+.Po
+e.g.
+.Sq ^A
+.Pc ,
+and the following backslashed escape sequences:
+.Pp
+.Bl -tag -compact -offset indent -width 4n
+.It Ic \ea
+Bell
+.It Ic \eb
+Backspace
+.It Ic \ee
+Escape
+.It Ic \ef
+Formfeed
+.It Ic \en
+Newline
+.It Ic \er
+Carriage return
+.It Ic \et
+Horizontal tab
+.It Ic \ev
+Vertical tab
+.Sm off
+.It Sy \e Ar nnn
+.Sm on
+The ASCII character corresponding to the octal number
+.Ar nnn .
+.El
+.Pp
+.Sq \e
+nullifies the special meaning of the following character,
+if it has any, notably
+.Sq \e
+and
+.Sq ^ .
+.It Ic echotc Oo Fl sv Oc Ar arg Ar ...
+Exercise terminal capabilities given in
+.Ar arg Ar ... .
+If
+.Ar arg
+is
+.Sq baud ,
+.Sq cols ,
+.Sq lines ,
+.Sq rows ,
+.Sq meta or
+.Sq tabs ,
+the value of that capability is printed, with
+.Dq yes
+or
+.Dq no
+indicating that the terminal does or does not have that capability.
+.Pp
+.Fl s
+returns an empty string for non-existent capabilities, rather than
+causing an error.
+.Fl v
+causes messages to be verbose.
+.It Ic edit Op Li on | Li off
+Enable or disable the
+.Nm editline
+functionality in a program.
+.It Ic history Ar list | Ar size Dv n | Ar unique Dv n
+The
+.Ar list
+command lists all entries in the history.
+The
+.Ar size
+command sets the history size to
+.Dv n
+entries.
+The
+.Ar unique
+command controls if history should keep duplicate entries.
+If
+.Dv n
+is non zero, only keep unique history entries.
+If
+.Dv n
+is zero, then keep all entries (the default).
+.It Ic telltc
+List the values of all the terminal capabilities (see
+.Xr termcap 5 ) .
+.It Ic settc Ar cap Ar val
+Set the terminal capability
+.Ar cap
+to
+.Ar val ,
+as defined in
+.Xr termcap 5 .
+No sanity checking is done.
+.It Ic setty Oo Fl a Oc Oo Fl d Oc Oo Fl q Oc Oo Fl x Oc Oo Ar +mode Oc \
+Oo Ar -mode Oc Oo Ar mode Oc Oo Ar char=c Oc
+Control which tty modes that
+.Nm
+won't allow the user to change.
+.Fl d ,
+.Fl q
+or
+.Fl x
+tells
+.Ic setty
+to act on the
+.Sq edit ,
+.Sq quote
+or
+.Sq execute
+set of tty modes respectively; defaulting to
+.Fl x .
+.Pp
+Without other arguments,
+.Ic setty
+lists the modes in the chosen set which are fixed on
+.Po
+.Sq +mode
+.Pc
+or off
+.Po
+.Sq -mode
+.Pc .
+.Fl a
+lists all tty modes in the chosen set regardless of the setting.
+With
+.Ar +mode ,
+.Ar -mode
+or
+.Ar mode ,
+fixes
+.Ar mode
+on or off or removes control of
+.Ar mode
+in the chosen set.
+.Pp
+.Ic Setty
+can also be used to set tty characters to particular values using
+.Ar char=value .
+If
+.Ar value
+is empty
+then the character is set to
+.Dv _POSIX_VDISABLE .
+.El
+.Sh EDITOR COMMANDS
+The following editor commands are available for use in key bindings:
+.\" Section automatically generated with makelist
+.Bl -tag -width 4n
+.It Ic vi-paste-next
+Vi paste previous deletion to the right of the cursor.
+.It Ic vi-paste-prev
+Vi paste previous deletion to the left of the cursor.
+.It Ic vi-prev-space-word
+Vi move to the previous space delimited word.
+.It Ic vi-prev-word
+Vi move to the previous word.
+.It Ic vi-next-space-word
+Vi move to the next space delimited word.
+.It Ic vi-next-word
+Vi move to the next word.
+.It Ic vi-change-case
+Vi change case of character under the cursor and advance one character.
+.It Ic vi-change-meta
+Vi change prefix command.
+.It Ic vi-insert-at-bol
+Vi enter insert mode at the beginning of line.
+.It Ic vi-replace-char
+Vi replace character under the cursor with the next character typed.
+.It Ic vi-replace-mode
+Vi enter replace mode.
+.It Ic vi-substitute-char
+Vi replace character under the cursor and enter insert mode.
+.It Ic vi-substitute-line
+Vi substitute entire line.
+.It Ic vi-change-to-eol
+Vi change to end of line.
+.It Ic vi-insert
+Vi enter insert mode.
+.It Ic vi-add
+Vi enter insert mode after the cursor.
+.It Ic vi-add-at-eol
+Vi enter insert mode at end of line.
+.It Ic vi-delete-meta
+Vi delete prefix command.
+.It Ic vi-end-word
+Vi move to the end of the current space delimited word.
+.It Ic vi-to-end-word
+Vi move to the end of the current word.
+.It Ic vi-undo
+Vi undo last change.
+.It Ic vi-command-mode
+Vi enter command mode (use alternative key bindings).
+.It Ic vi-zero
+Vi move to the beginning of line.
+.It Ic vi-delete-prev-char
+Vi move to previous character (backspace).
+.It Ic vi-list-or-eof
+Vi list choices for completion or indicate end of file if empty line.
+.It Ic vi-kill-line-prev
+Vi cut from beginning of line to cursor.
+.It Ic vi-search-prev
+Vi search history previous.
+.It Ic vi-search-next
+Vi search history next.
+.It Ic vi-repeat-search-next
+Vi repeat current search in the same search direction.
+.It Ic vi-repeat-search-prev
+Vi repeat current search in the opposite search direction.
+.It Ic vi-next-char
+Vi move to the character specified next.
+.It Ic vi-prev-char
+Vi move to the character specified previous.
+.It Ic vi-to-next-char
+Vi move up to the character specified next.
+.It Ic vi-to-prev-char
+Vi move up to the character specified previous.
+.It Ic vi-repeat-next-char
+Vi repeat current character search in the same search direction.
+.It Ic vi-repeat-prev-char
+Vi repeat current character search in the opposite search direction.
+.It Ic em-delete-or-list
+Delete character under cursor or list completions if at end of line.
+.It Ic em-delete-next-word
+Cut from cursor to end of current word.
+.It Ic em-yank
+Paste cut buffer at cursor position.
+.It Ic em-kill-line
+Cut the entire line and save in cut buffer.
+.It Ic em-kill-region
+Cut area between mark and cursor and save in cut buffer.
+.It Ic em-copy-region
+Copy area between mark and cursor to cut buffer.
+.It Ic em-gosmacs-transpose
+Exchange the two characters before the cursor.
+.It Ic em-next-word
+Move next to end of current word.
+.It Ic em-upper-case
+Uppercase the characters from cursor to end of current word.
+.It Ic em-capitol-case
+Capitalize the characters from cursor to end of current word.
+.It Ic em-lower-case
+Lowercase the characters from cursor to end of current word.
+.It Ic em-set-mark
+Set the mark at cursor.
+.It Ic em-exchange-mark
+Exchange the cursor and mark.
+.It Ic em-universal-argument
+Universal argument (argument times 4).
+.It Ic em-meta-next
+Add 8th bit to next character typed.
+.It Ic em-toggle-overwrite
+Switch from insert to overwrite mode or vice versa.
+.It Ic em-copy-prev-word
+Copy current word to cursor.
+.It Ic em-inc-search-next
+Emacs incremental next search.
+.It Ic em-inc-search-prev
+Emacs incremental reverse search.
+.It Ic ed-end-of-file
+Indicate end of file.
+.It Ic ed-insert
+Add character to the line.
+.It Ic ed-delete-prev-word
+Delete from beginning of current word to cursor.
+.It Ic ed-delete-next-char
+Delete character under cursor.
+.It Ic ed-kill-line
+Cut to the end of line.
+.It Ic ed-move-to-end
+Move cursor to the end of line.
+.It Ic ed-move-to-beg
+Move cursor to the beginning of line.
+.It Ic ed-transpose-chars
+Exchange the character to the left of the cursor with the one under it.
+.It Ic ed-next-char
+Move to the right one character.
+.It Ic ed-prev-word
+Move to the beginning of the current word.
+.It Ic ed-prev-char
+Move to the left one character.
+.It Ic ed-quoted-insert
+Add the next character typed verbatim.
+.It Ic ed-digit
+Adds to argument or enters a digit.
+.It Ic ed-argument-digit
+Digit that starts argument.
+.It Ic ed-unassigned
+Indicates unbound character.
+.It Ic ed-tty-sigint
+Tty interrupt character.
+.It Ic ed-tty-dsusp
+Tty delayed suspend character.
+.It Ic ed-tty-flush-output
+Tty flush output characters.
+.It Ic ed-tty-sigquit
+Tty quit character.
+.It Ic ed-tty-sigtstp
+Tty suspend character.
+.It Ic ed-tty-stop-output
+Tty disallow output characters.
+.It Ic ed-tty-start-output
+Tty allow output characters.
+.It Ic ed-newline
+Execute command.
+.It Ic ed-delete-prev-char
+Delete the character to the left of the cursor.
+.It Ic ed-clear-screen
+Clear screen leaving current line at the top.
+.It Ic ed-redisplay
+Redisplay everything.
+.It Ic ed-start-over
+Erase current line and start from scratch.
+.It Ic ed-sequence-lead-in
+First character in a bound sequence.
+.It Ic ed-prev-history
+Move to the previous history line.
+.It Ic ed-next-history
+Move to the next history line.
+.It Ic ed-search-prev-history
+Search previous in history for a line matching the current.
+.It Ic ed-search-next-history
+Search next in history for a line matching the current.
+.It Ic ed-prev-line
+Move up one line.
+.It Ic ed-next-line
+Move down one line.
+.It Ic ed-command
+Editline extended command.
+.El
+.\" End of section automatically generated with makelist
+.Sh SEE ALSO
+.Xr editline 3 ,
+.Xr regex 3 ,
+.Xr termcap 5
+.Sh AUTHORS
+The
+.Nm editline
+library was written by Christos Zoulas,
+and this manual was written by Luke Mewburn,
+with some sections inspired by
+.Xr tcsh 1 .
diff --git a/lib/libedit/doc/mdoc2man.awk b/lib/libedit/doc/mdoc2man.awk
new file mode 100644
index 000000000000..e21753f44904
--- /dev/null
+++ b/lib/libedit/doc/mdoc2man.awk
@@ -0,0 +1,459 @@
+#!/usr/bin/awk
+#
+# Version history:
+#  v3, I put the program under a proper license
+#      Dan Nelson <dnelson@allantgroup.com> added .An, .Aq and fixed a typo
+#  v2, fixed to work on GNU awk --posix and MacOS X
+#  v1, first attempt, didn't work on MacOS X
+#
+# Copyright (c) 2003 Peter Stuge <stuge-mdoc2man@cdy.org>
+#
+# Permission to use, copy, modify, and distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+
+BEGIN {
+  optlist=0
+  oldoptlist=0
+  nospace=0
+  synopsis=0
+  reference=0
+  block=0
+  ext=0
+  extopt=0
+  literal=0
+  prenl=0
+  breakw=0
+  line=""
+  proto=0
+  bl_level=0
+}
+
+function wtail() {
+  retval=""
+  while(w<nwords) {
+    if(length(retval))
+      retval=retval OFS
+    retval=retval words[++w]
+  }
+  return retval
+}
+
+function add(str) {
+  for(;prenl;prenl--)
+    line=line "\n"
+  line=line str
+}
+
+! /^\./ {
+  for(;prenl;prenl--)
+    print ""
+  print
+  if(literal)
+    print ".br"
+  next
+}
+
+/^\.\\"/ { next }
+
+{
+  option=0
+  parens=0
+  angles=0
+  sub("^\\.","")
+  nwords=split($0,words)
+  for(w=1;w<=nwords;w++) {
+    skip=0
+    if(match(words[w],"^Li|Pf$")) {
+      skip=1
+    } else if(match(words[w],"^Xo$")) {
+      skip=1
+      ext=1
+      if(length(line)&&!(match(line," $")||prenl))
+	add(OFS)
+    } else if(match(words[w],"^Xc$")) {
+      skip=1
+      ext=0
+      if(!extopt)
+	prenl++
+      w=nwords
+    } else if(match(words[w],"^Bd$")) {
+      skip=1
+      if(match(words[w+1],"-literal")) {
+	literal=1
+	prenl++
+	w=nwords
+      }
+    } else if(match(words[w],"^Po$")) {
+      skip=1
+      add("(")
+      if(!nospace)
+	nospace=1
+    } else if(match(words[w],"^Pc$")) {
+      skip=1
+      add(")")
+      if(!nospace)
+	nospace=1
+    } else if(match(words[w],"^Ed$")) {
+      skip=1
+      literal=0
+    } else if(match(words[w],"^Ns$")) {
+      skip=1
+      if(!nospace)
+	nospace=1
+      sub(" $","",line)
+    } else if(match(words[w],"^No$")) {
+      skip=1
+      sub(" $","",line)
+      add(words[++w])
+    } else if(match(words[w],"^Dq$")) {
+      skip=1
+      add("``")
+      add(words[++w])
+      while(w<nwords&&!match(words[w+1],"^[\\.,]"))
+	add(OFS words[++w])
+      add("''")
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Va$")) {
+      skip=1
+      add("\\fI" words[++w])
+      while(w<nwords&&!match(words[w+1],"^[\\.,]"))
+	add(OFS words[++w])
+      add("\\fP")
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Sq|Ql$")) {
+      skip=1
+      add("`" words[++w] "'")
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Oo$")) {
+      skip=1
+      extopt=1
+      if(!nospace)
+	nospace=1
+      add("[")
+    } else if(match(words[w],"^Oc$")) {
+      skip=1
+      extopt=0
+      add("]")
+    }
+    if(!skip) {
+      if(!nospace&&length(line)&&!(match(line," $")||prenl))
+	add(OFS)
+      if(nospace==1)
+	nospace=0
+    }
+    if(match(words[w],"^Dd$")) {
+      date=wtail()
+      next
+    } else if(match(words[w],"^Dt$")) {
+      id=wtail()
+      next
+    } else if(match(words[w],"^Os$")) {
+      add(".TH " id " \"" date "\" \"" wtail() "\"")
+    } else if(match(words[w],"^Sh$")) {
+      add(".SH")
+      synopsis=match(words[w+1],"SYNOPSIS")
+    } else if(match(words[w],"^Xr$")) {
+      #add("\\fB" words[++w] "\\fP(" words[++w] ")" words[++w])
+      add("\\fB" words[++w] "\\fP(" words[++w] ")")
+      sub("^Ns$", "", words[w+1])
+      add(words[++w])
+    } else if(match(words[w],"^Rs$")) {
+      split("",refauthors)
+      nrefauthors=0
+      reftitle=""
+      refissue=""
+      refdate=""
+      refopt=""
+      reference=1
+      next
+    } else if(match(words[w],"^Re$")) {
+      prenl++
+      for(i=nrefauthors-1;i>0;i--) {
+	add(refauthors[i])
+	if(i>1)
+	  add(", ")
+      }
+      if(nrefauthors>1)
+	add(" and ")
+      add(refauthors[0] ", \\fI" reftitle "\\fP")
+      if(length(refissue))
+	add(", " refissue)
+      if(length(refdate))
+	add(", " refdate)
+      if(length(refopt))
+	add(", " refopt)
+      add(".")
+      reference=0
+    } else if(reference) {
+      if(match(words[w],"^%A$")) { refauthors[nrefauthors++]=wtail() }
+      if(match(words[w],"^%T$")) {
+	reftitle=wtail()
+	sub("^\"","",reftitle)
+	sub("\"$","",reftitle)
+      }
+      if(match(words[w],"^%N$")) { refissue=wtail() }
+      if(match(words[w],"^%D$")) { refdate=wtail() }
+      if(match(words[w],"^%O$")) { refopt=wtail() }
+    } else if(match(words[w],"^Nm$")) {
+      if(synopsis) {
+	add(".br")
+	prenl++
+      }
+      n=words[++w]
+      if(!length(name))
+	name=n
+      if(!length(n))
+	n=name
+      add("\\fB" n "\\fP")
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Nd$")) {
+      add("\\- " wtail())
+    } else if(match(words[w],"^Fl$")) {
+      add("\\fB\\-" words[++w] "\\fP")
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Ar$")) {
+      add("\\fI")
+      if(w==nwords)
+	add("file ...\\fP")
+      else {
+	add(words[++w] "\\fP")
+	while(match(words[w+1],"^\\|$"))
+	  add(OFS words[++w] " \\fI" words[++w] "\\fP")
+      }
+      if(!nospace&&match(words[w+1],"^[\\.,]"))
+	nospace=1
+    } else if(match(words[w],"^Cm$")) {
+      add("\\fB" words[++w] "\\fP")
+      while(w<nwords&&match(words[w+1],"^[\\.,:;)]"))
+	add(words[++w])
+    } else if(match(words[w],"^Op$")) {
+      option=1
+      if(!nospace)
+	nospace=1
+      add("[")
+    } else if(match(words[w],"^Pp$")) {
+      prenl++
+    } else if(match(words[w],"^An$")) {
+      prenl++
+    } else if(match(words[w],"^Ss$")) {
+      add(".SS")
+    } else if(match(words[w],"^Pa$")&&!option) {
+      add("\\fI")
+      w++
+      if(match(words[w],"^\\."))
+	add("\\&")
+      add(words[w] "\\fP")
+      while(w<nwords&&match(words[w+1],"^[\\.,:;)]"))
+	add(words[++w])
+    } else if(match(words[w],"^Dv$")) {
+      #add(".BR")
+    } else if(match(words[w],"^Em|Ev$")) {
+      add(".IR")
+    } else if(match(words[w],"^Pq$")) {
+      add("(")
+      nospace=1
+      parens=1
+    } else if(match(words[w],"^Aq$")) {
+      add("<")
+      nospace=1
+      angles=1
+    } else if(match(words[w],"^S[xy]$")) {
+      add(".B " wtail())
+    } else if(match(words[w],"^Ic$")) {
+      plain=1
+      add("\\fB")
+      while(w<nwords) {
+	w++
+	if(match(words[w],"^Op$")) {
+	  w++
+	  add("[")
+	  words[nwords]=words[nwords] "]"
+	}
+	if(match(words[w],"^Ar$")) {
+	  add("\\fI" words[++w] "\\fP")
+	} else if(match(words[w],"^[\\.,]")) {
+	  sub(" $","",line)
+	  if(plain) {
+	    add("\\fP")
+	    plain=0
+	  }
+	  add(words[w])
+	} else if(match(words[w],"^Xo$")) {
+	} else {
+	  if(!plain) {
+	    add("\\fB")
+	    plain=1
+	  }
+	  add(words[w])
+	}
+	if(!nospace)
+	  add(OFS)
+      }
+      sub(" $","",line)
+      if(plain)
+	add("\\fP")
+    } else if(match(words[w],"^Dl$")) {
+       ## remove is ok for editrc.5
+    } else if(match(words[w],"^Bl$")) {
+      ++bl_level
+      if (bl_level > 1)
+         add(".RS")
+      oldoptlist=optlist
+      if(match(words[w+1],"-bullet"))
+	optlist=1
+      else if(match(words[w+1],"-enum")) {
+	optlist=2
+	enum=0
+      } else if(match(words[w+1],"-tag"))
+	optlist=3
+      else if(match(words[w+1],"-item"))
+	optlist=4
+      else if(match(words[w+1],"-bullet"))
+	optlist=1
+      w=nwords
+    } else if(match(words[w],"^El$")) {
+      if (bl_level > 1)
+         add(".RE")
+      --bl_level
+      optlist=oldoptlist
+    } else if(match(words[w],"^Bk$")) {
+      if(match(words[w+1],"-words")) {
+	w++
+	breakw=1
+      }
+    } else if(match(words[w],"^Ek$")) {
+      breakw=0
+    } else if(match(words[w],"^It$")&&optlist) {
+      if(optlist==1)
+	add(".IP \\(bu")
+      else if(optlist==2)
+	add(".IP " ++enum ".")
+      else if(optlist==3) {
+	add(".TP")
+	prenl++
+	if(match(words[w+1],"^Pa$|^Ev$")) {
+	  add(".B")
+	  w++
+	}
+      } else if(optlist==4)
+	add(".IP")
+    } else if(match(words[w],"^Sm$")) {
+      if(match(words[w+1],"off"))
+	nospace=2
+      else if(match(words[w+1],"on"))
+	nospace=0
+      w++
+    } else if(match(words[w],"^Lb$")) {
+      wtail()
+      add("Command Line Editor Library (libedit, -ledit)")
+    } else if(match(words[w],"^In$")) {
+      add(".PP\n")
+      add("\\fB#include <" wtail() ">\\fP")
+    } else if(match(words[w],"^Ft$")) {
+      add(".PP\n")
+      add("\\fI" wtail() "\\fP\n")
+      add(".br")
+      proto=1
+    } else if(match(words[w],"^Fn$")) {
+      add("\\fB" words[++w] "\\fP(")
+      punct=0
+      while(++w<=nwords) {
+         if(match(words[w], "^\".*\"$")) {
+            sub("^\"", "", words[w])
+            sub("\"$", "", words[w])
+	    add("\\fI" words[w] "\\fP")
+            if (w!=nwords) {
+	       add(", ")
+            }
+         } else if(match(words[w], "^\"")) {
+            sub("^\"", "", words[w])
+	    add("\\fI" words[w] " ")
+         } else if (match(words[w], "\"$")) {
+            sub("\"$", "", words[w])
+	    add(words[w] "\\fP")
+            if (w!=nwords) {
+	       add(", ")
+            }
+         } else {
+            if (w==nwords&&(match(words[w], "^[.,]$"))) {
+               punct=1
+            } else {
+	       add(words[w] " ")
+            }
+               
+         }
+      }
+      add(")")
+      if (punct==1) {
+         add(words[w-1])
+      } else {
+         if (proto==1) {
+            add(";")
+            proto=0
+         }
+      }
+    } else if(match(words[w],"^Fa$")) {
+      punct=0
+      add("\\fI")
+      while(++w<=nwords) {
+         if(match(words[w], "^\".*\"$")) {
+            sub("^\"", "", words[w])
+            sub("\"$", "", words[w])
+	    add(words[w])
+         } else if(match(words[w], "^\"")) {
+            sub("^\"", "", words[w])
+	    add(words[w] " ")
+         } else if (match(words[w], "\"$")) {
+            sub("\"$", "", words[w])
+	    add(words[w])
+         } else {
+            if (w==nwords&&(match(words[w], "^[.,]$"))) {
+               punct=1
+            } else {
+               if (w+1==nwords&&(match(words[w+1], "^[.,]$"))) {
+	          add(words[w])
+               } else {
+	          add(words[w] " ")
+               }
+            }
+         }
+      }
+      add("\\fP")
+      if (punct==1) {
+         add(words[w-1])
+      }
+    } else if(!skip) {
+      add(words[w])
+    }
+  }
+  if(match(line,"^\\.[^a-zA-Z]"))
+    sub("^\\.","",line)
+  if(parens)
+    add(")")
+  if(angles)
+    add(">")
+  if(option)
+    add("]")
+  if(ext&&!extopt&&!match(line," $"))
+    add(OFS)
+  if(!ext&&!extopt&&length(line)) {
+    print line
+    prenl=0
+    line=""
+  }
+}