Properly trim the vendor tree to include only those files that we want

merged into FreeBSD. Cherry picking from a full vendor tree was too
hard and lead to undestirable svn results.

Note: We only tim the dts* files, we don't trim the dt-bindings tree,
since having all of them causes no problems and the benefit to
trimming there is far out weighed by the cost of doing the trim each
time.

1 files changed, 0 insertions, 174 deletions

diff --git a/src/arm/am3517-craneboard.dts b/src/arm/am3517-craneboard.dts
deleted file mode 100644
index 2d40b3f241cd..000000000000
--- a/src/arm/am3517-craneboard.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * See craneboard.org for more details
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am3517.dtsi"
-
-/ {
-	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
-	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;	/* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-};
-
-&davinci_emac {
-	status = "okay";
-};
-
-&davinci_mdio {
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <2600000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&mmc1 {
-	vmmc-supply = <&vdd2_reg>;
-	bus-width = <8>;
-};
-
-&mmc2 {
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-&mmc3 {
-	/* goes to expansion connector */
-	status = "disabled";
-};
-
-#include "tps65910.dtsi"
-
-&omap3_pmx_core {
-	tps_pins: pinmux_tps_pins {
-		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
-		>;
-	};
-};
-
-&tps {
-	pinctrl-names = "default";
-	pinctrl-0 = <&tps_pins>;
-
-	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
-	interrupt-parent = <&intc>;
-
-	ti,en-ck32k-xtal;
-
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		/*
-		 * Unused:
-		 * VDIG1=2.7V,300mA max
-		 * VDIG2=1.8V,300mA max
-		 */
-
-		vpll_reg: regulator@7 {
-			/* VDDS_DPLL_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			/* VDDS_SRAM_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			/* VDDA1P8V_USBPHY */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		/* VAUX33 unused */
-
-		vdac_reg: regulator@8 {
-			/* VDDA_DAC_1V8 */
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			/* VDDA3P3V_USBPHY */
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_CORE */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDDSHV_3V3 */
-			regulator-name = "vdd_shv";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		/* VDD3 unused */
-	};
-};