Properly trim the vendor tree to include only those files that we want

merged into FreeBSD. Cherry picking from a full vendor tree was too
hard and lead to undestirable svn results.

Note: We only tim the dts* files, we don't trim the dt-bindings tree,
since having all of them causes no problems and the benefit to
trimming there is far out weighed by the cost of doing the trim each
time.

1 files changed, 0 insertions, 494 deletions

diff --git a/src/arm/exynos4210-universal_c210.dts b/src/arm/exynos4210-universal_c210.dts
deleted file mode 100644
index d50eb3aa708e..000000000000
--- a/src/arm/exynos4210-universal_c210.dts
+++ /dev/null
@@ -1,494 +0,0 @@
-/*
- * Samsung's Exynos4210 based Universal C210 board device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Universal C210 board which is based on
- * Samsung's Exynos4210 rev0 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-
-/ {
-	model = "Samsung Universal C210 based on Exynos4210 rev0";
-	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
-
-	memory {
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
-	};
-
-	sysram@02020000 {
-		smp-sysram@0 {
-			status = "disabled";
-		};
-
-		smp-sysram@5000 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x5000 0x1000>;
-		};
-
-		smp-sysram@1f000 {
-			status = "disabled";
-		};
-	};
-
-	mct@10050000 {
-		compatible = "none";
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	vemmc_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
-		regulator-name = "VMEM_VDD_2_8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe1 3 0>;
-		enable-active-high;
-	};
-
-	hsotg@12480000 {
-		vusb_d-supply = <&ldo3_reg>;
-		vusb_a-supply = <&ldo8_reg>;
-		status = "okay";
-	};
-
-	sdhci_emmc: sdhci@12510000 {
-		bus-width = <8>;
-		non-removable;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&vemmc_reg>;
-		status = "okay";
-	};
-
-	sdhci_sd: sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo5_reg>;
-		cd-gpios = <&gpx3 4 0>;
-		cd-inverted;
-		status = "okay";
-	};
-
-	ehci@12580000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	ohci@12590000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		vol-up-key {
-			gpios = <&gpx2 0 1>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <1>;
-		};
-
-		vol-down-key {
-			gpios = <&gpx2 1 1>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <1>;
-		};
-
-		config-key {
-			gpios = <&gpx2 2 1>;
-			linux,code = <171>;
-			label = "config";
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-
-		camera-key {
-			gpios = <&gpx2 3 1>;
-			linux,code = <212>;
-			label = "camera";
-			debounce-interval = <1>;
-		};
-
-		power-key {
-			gpios = <&gpx2 7 1>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-
-		ok-key {
-			gpios = <&gpx3 5 1>;
-			linux,code = <352>;
-			label = "ok";
-			debounce-interval = <1>;
-		};
-	};
-
-	tsp_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
-		regulator-name = "TSP_2_8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe2 3 0>;
-		enable-active-high;
-	};
-
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		tsp@4a {
-			/* TBD: Atmel maXtouch touchscreen */
-			reg = <0x4a>;
-		};
-	};
-
-	i2c@138B0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c5_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		vdd_arm_reg: pmic@60 {
-			compatible = "maxim,max8952";
-			reg = <0x60>;
-
-			max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
-			max8952,default-mode = <0>;
-			max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-							<1050000>, <950000>;
-			max8952,sync-freq = <0>;
-			max8952,ramp-speed = <0>;
-
-			regulator-name = "vdd_arm";
-			regulator-min-microvolt = <770000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pmic@66 {
-			compatible = "national,lp3974";
-			reg = <0x66>;
-
-			max8998,pmic-buck1-default-dvs-idx = <0>;
-			max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
-							<&gpx0 6 0>;
-			max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
-							<1100000>, <1000000>;
-
-			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
-			max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
-
-			regulators {
-				ldo2_reg: LDO2 {
-					regulator-name = "VALIVE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VUSB+MIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "LDO6";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VLCD+VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VUSB+VDAC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VCC_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "CAM_AF_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "PS_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VHIC_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "CAM_I_HOST_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "CAM_S_ANA_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VCC_3.0V_LCD";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "VINT_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VG3D_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VCC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "VMEM_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ap32khz_reg: EN32KHz-AP {
-					regulator-name = "32KHz AP";
-					regulator-always-on;
-				};
-
-				cp32khz_reg: EN32KHz-CP {
-					regulator-name = "32KHz CP";
-				};
-
-				vichg_reg: ENVICHG {
-					regulator-name = "VICHG";
-				};
-
-				safeout1_reg: ESAFEOUT1 {
-					regulator-name = "SAFEOUT1";
-					regulator-always-on;
-				};
-
-				safeout2_reg: ESAFEOUT2 {
-					regulator-name = "SAFEOUT2";
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	spi-lcd {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-sck = <&gpy3 1 0>;
-		gpio-mosi = <&gpy3 3 0>;
-		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 0>;
-
-		lcd@0 {
-			compatible = "samsung,ld9040";
-			reg = <0>;
-			vdd3-supply = <&ldo7_reg>;
-			vci-supply = <&ldo17_reg>;
-			reset-gpios = <&gpy4 5 0>;
-			spi-max-frequency = <1200000>;
-			spi-cpol;
-			spi-cpha;
-			power-on-delay = <10>;
-			reset-delay = <10>;
-			panel-width-mm = <90>;
-			panel-height-mm = <154>;
-			display-timings {
-				timing {
-					clock-frequency = <23492370>;
-					hactive = <480>;
-					vactive = <800>;
-					hback-porch = <16>;
-					hfront-porch = <16>;
-					vback-porch = <2>;
-					vfront-porch = <28>;
-					hsync-len = <2>;
-					vsync-len = <1>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <0>;
-					pixelclk-active = <0>;
-				};
-			};
-			port {
-				lcd_ep: endpoint {
-					remote-endpoint = <&fimd_dpi_ep>;
-				};
-			};
-		};
-	};
-
-	fimd: fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
-		pinctrl-names = "default";
-		status = "okay";
-		samsung,invert-vden;
-		samsung,invert-vclk;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@3 {
-			reg = <3>;
-			fimd_dpi_ep: endpoint {
-				remote-endpoint = <&lcd_ep>;
-			};
-		};
-	};
-
-	pwm@139D0000 {
-		compatible = "samsung,s5p6440-pwm";
-		status = "okay";
-	};
-
-	camera {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-		};
-	};
-};
-
-&mdma1 {
-	reg = <0x12840000 0x1000>;
-};