Import sqlite3-3.23.1 (3230100)vendor/sqlite3/sqlite-3230100

3 files changed, 0 insertions, 1819 deletions

diff --git a/tea/win/makefile.vc b/tea/win/makefile.vc
deleted file mode 100644
index a5e462770721..000000000000
--- a/tea/win/makefile.vc
+++ /dev/null
@@ -1,414 +0,0 @@
-# makefile.vc --                                               -*- Makefile -*-
-#
-# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
-#
-# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to 
-# make it suitable as a general package makefile. Look for the word EDIT
-# which marks sections that may need modification. As a minumum you will
-# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
-# relevant to your package.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-# 
-# Copyright (c) 1995-1996 Sun Microsystems, Inc.
-# Copyright (c) 1998-2000 Ajuba Solutions.
-# Copyright (c) 2001 ActiveState Corporation.
-# Copyright (c) 2001-2002 David Gravereaux.
-# Copyright (c) 2003 Pat Thoyts
-#
-#-------------------------------------------------------------------------
-# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $
-#-------------------------------------------------------------------------
-
-!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
-MSG = ^
-You will need to run vcvars32.bat from Developer Studio, first, to setup^
-the environment.  Jump to this line to read the new instructions.
-!error $(MSG)
-!endif
-
-#------------------------------------------------------------------------------
-# HOW TO USE this makefile:
-#
-# 1)  It is now necessary to have %MSVCDir% set in the environment.  This is
-#     used  as a check to see if vcvars32.bat had been run prior to running
-#     nmake or during the installation of Microsoft Visual C++, MSVCDir had
-#     been set globally and the PATH adjusted.  Either way is valid.
-#
-#     You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
-#     directory to setup the proper environment, if needed, for your current
-#     setup.  This is a needed bootstrap requirement and allows the swapping of
-#     different environments to be easier.
-#
-# 2)  To use the Platform SDK (not expressly needed), run setenv.bat after
-#     vcvars32.bat according to the instructions for it.  This can also turn on
-#     the 64-bit compiler, if your SDK has it.
-#
-# 3)  Targets are:
-#	all       -- Builds everything.
-#       <project> -- Builds the project (eg: nmake sample)
-#	test      -- Builds and runs the test suite.
-#	install   -- Installs the built binaries and libraries to $(INSTALLDIR)
-#		     in an appropriate subdirectory.
-#	clean/realclean/distclean -- varying levels of cleaning.
-#
-# 4)  Macros usable on the commandline:
-#	INSTALLDIR=<path>
-#		Sets where to install Tcl from the built binaries.
-#		C:\Progra~1\Tcl is assumed when not specified.
-#
-#	OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
-#		Sets special options for the core.  The default is for none.
-#		Any combination of the above may be used (comma separated).
-#		'none' will over-ride everything to nothing.
-#
-#		static  =  Builds a static library of the core instead of a
-#			   dll.  The shell will be static (and large), as well.
-#		msvcrt  =  Effects the static option only to switch it from
-#			   using libcmt(d) as the C runtime [by default] to
-#			   msvcrt(d). This is useful for static embedding
-#			   support.
-#		staticpkg = Effects the static option only to switch
-#			   tclshXX.exe to have the dde and reg extension linked
-#			   inside it.
-#		threads =  Turns on full multithreading support.
-#		thrdalloc = Use the thread allocator (shared global free pool).
-#		symbols =  Adds symbols for step debugging.
-#		profile =  Adds profiling hooks.  Map file is assumed.
-#		loimpact =  Adds a flag for how NT treats the heap to keep memory
-#			   in use, low.  This is said to impact alloc performance.
-#
-#	STATS=memdbg,compdbg,none
-#		Sets optional memory and bytecode compiler debugging code added
-#		to the core.  The default is for none.  Any combination of the
-#		above may be used (comma separated).  'none' will over-ride
-#		everything to nothing.
-#
-#		memdbg   = Enables the debugging memory allocator.
-#		compdbg  = Enables byte compilation logging.
-#
-#	MACHINE=(IX86|IA64|ALPHA)
-#		Set the machine type used for the compiler, linker, and
-#		resource compiler.  This hook is needed to tell the tools
-#		when alternate platforms are requested.  IX86 is the default
-#		when not specified.
-#
-#	TMP_DIR=<path>
-#	OUT_DIR=<path>
-#		Hooks to allow the intermediate and output directories to be
-#		changed.  $(OUT_DIR) is assumed to be 
-#		$(BINROOT)\(Release|Debug) based on if symbols are requested.
-#		$(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
-#
-#	TESTPAT=<file>
-#		Reads the tests requested to be run from this file.
-#
-#	CFG_ENCODING=encoding
-#		name of encoding for configuration information. Defaults
-#		to cp1252
-#
-# 5)  Examples:
-#
-#	Basic syntax of calling nmake looks like this:
-#	nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
-#
-#                        Standard (no frills)
-#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
-#       Setting environment for using Microsoft Visual C++ tools.
-#       c:\tcl_src\win\>nmake -f makefile.vc all
-#       c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
-#
-#                         Building for Win64
-#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
-#       Setting environment for using Microsoft Visual C++ tools.
-#       c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
-#       Targeting Windows pre64 RETAIL
-#       c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
-#
-#------------------------------------------------------------------------------
-#==============================================================================
-###############################################################################
-#------------------------------------------------------------------------------
-
-!if !exist("makefile.vc")
-MSG = ^
-You must run this makefile only from the directory it is in.^
-Please `cd` to its location first.
-!error $(MSG)
-!endif
-
-#-------------------------------------------------------------------------
-# Project specific information (EDIT)
-#
-# You should edit this with the name and version of your project. This
-# information is used to generate the name of the package library and
-# it's install location.
-#
-# For example, the sample extension is  going to build sample04.dll and
-# would install it into $(INSTALLDIR)\lib\sample04
-#
-# You need to specify the object files that need to be linked into your
-# binary here.
-#
-#-------------------------------------------------------------------------
-
-PROJECT = sqlite3
-!include "rules.vc"
-
-# nmakehelp -V <file> <tag> will search the file for tag, skips until a
-#	number and returns all character until a character not in [0-9.ab]
-#	is read.
-
-!if [echo REM = This file is generated from Makefile.vc > versions.vc]
-!endif
-# get project version from row "AC_INIT([sqlite], [3.7.14])"
-!if [echo DOTVERSION = \>> versions.vc] \
-   && [nmakehlp -V ..\configure.in AC_INIT >> versions.vc]
-!endif
-!include "versions.vc"
-
-VERSION         = $(DOTVERSION:.=)
-STUBPREFIX      = $(PROJECT)stub
-
-DLLOBJS = \
-	$(TMP_DIR)\tclsqlite3.obj
-
-#-------------------------------------------------------------------------
-# Target names and paths ( shouldn't need changing )
-#-------------------------------------------------------------------------
-
-BINROOT		= .
-ROOT            = ..
-
-PRJIMPLIB	= $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
-PRJLIBNAME	= $(PROJECT)$(VERSION)$(SUFX).$(EXT)
-PRJLIB		= $(OUT_DIR)\$(PRJLIBNAME)
-
-PRJSTUBLIBNAME	= $(STUBPREFIX)$(VERSION).lib
-PRJSTUBLIB	= $(OUT_DIR)\$(PRJSTUBLIBNAME)
-
-### Make sure we use backslash only.
-PRJ_INSTALL_DIR         = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
-LIB_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
-BIN_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
-DOC_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
-SCRIPT_INSTALL_DIR	= $(PRJ_INSTALL_DIR)
-INCLUDE_INSTALL_DIR	= $(_TCLDIR)\include
-
-### The following paths CANNOT have spaces in them.
-GENERICDIR	= $(ROOT)\generic
-WINDIR		= $(ROOT)\win
-LIBDIR          = $(ROOT)\library
-DOCDIR		= $(ROOT)\doc
-TOOLSDIR	= $(ROOT)\tools
-COMPATDIR	= $(ROOT)\compat
-
-#---------------------------------------------------------------------
-# Compile flags
-#---------------------------------------------------------------------
-
-!if !$(DEBUG)
-!if $(OPTIMIZING)
-### This cranks the optimization level to maximize speed
-cdebug	= -O2 -Op -Gs
-!else
-cdebug	=
-!endif
-!else if "$(MACHINE)" == "IA64"
-### Warnings are too many, can't support warnings into errors.
-cdebug	= -Z7 -Od -GZ
-!else
-cdebug	= -Z7 -WX -Od -GZ
-!endif
-
-### Declarations common to all compiler options
-cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\
-
-!if $(MSVCRT)
-!if $(DEBUG)
-crt = -MDd
-!else
-crt = -MD
-!endif
-!else
-!if $(DEBUG)
-crt = -MTd
-!else
-crt = -MT
-!endif
-!endif
-
-INCLUDES	= $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \
-                  -I"$(ROOT)\.."
-BASE_CLFAGS	= $(cflags) $(cdebug) $(crt) $(INCLUDES) \
-                  -DSQLITE_3_SUFFIX_ONLY=1 -DSQLITE_ENABLE_RTREE=1 \
-                  -DSQLITE_ENABLE_FTS3=1 -DSQLITE_OMIT_DEPRECATED=1
-CON_CFLAGS	= $(cflags) $(cdebug) $(crt) -DCONSOLE -DSQLITE_ENABLE_FTS3=1
-TCL_CFLAGS	= -DBUILD_sqlite -DUSE_TCL_STUBS \
-                  -DPACKAGE_VERSION="\"$(DOTVERSION)\"" $(BASE_CLFAGS) \
-                  $(OPTDEFINES)
-
-#---------------------------------------------------------------------
-# Link flags
-#---------------------------------------------------------------------
-
-!if $(DEBUG)
-ldebug	= -debug:full -debugtype:cv
-!else
-ldebug	= -release -opt:ref -opt:icf,3
-!endif
-
-### Declarations common to all linker options
-lflags	= -nologo -machine:$(MACHINE) $(ldebug)
-
-!if $(PROFILE)
-lflags	= $(lflags) -profile
-!endif
-
-!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
-### Align sections for PE size savings.
-lflags	= $(lflags) -opt:nowin98
-!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
-### Align sections for speed in loading by choosing the virtual page size.
-lflags	= $(lflags) -align:4096
-!endif
-
-!if $(LOIMPACT)
-lflags	= $(lflags) -ws:aggressive
-!endif
-
-dlllflags = $(lflags) -dll
-conlflags = $(lflags) -subsystem:console
-guilflags = $(lflags) -subsystem:windows
-baselibs   = $(TCLSTUBLIB)
-
-#---------------------------------------------------------------------
-# TclTest flags
-#---------------------------------------------------------------------
-
-!IF "$(TESTPAT)" != ""
-TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
-!ENDIF
-
-#---------------------------------------------------------------------
-# Project specific targets (EDIT)
-#---------------------------------------------------------------------
-
-all:	    setup $(PROJECT)
-$(PROJECT): setup $(PRJLIB)
-install:    install-binaries install-libraries install-docs
-
-# Tests need to ensure we load the right dll file we
-# have to handle the output differently on Win9x.
-#
-!if "$(OS)" == "Windows_NT"  || "$(MSVCDIR)" == "IDE"
-test: setup $(PROJECT)
-        set TCL_LIBRARY=$(ROOT)/library
-        $(TCLSH) <<
-load $(PRJLIB:\=/)
-cd "$(ROOT)/tests"
-set argv "$(TESTFLAGS)"
-source all.tcl
-<<
-!else
-test: setup $(PROJECT)
-        echo Please wait while the test results are collected
-        set TCL_LIBRARY=$(ROOT)/library
-        $(TCLSH) << >tests.log
-load $(PRJLIB:\=/)
-cd "$(ROOT)/tests"
-set argv "$(TESTFLAGS)"
-source all.tcl
-<<
-        type tests.log | more
-!endif
-
-setup:
-	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
-	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
-
-$(PRJLIB): $(DLLOBJS)
-	$(link32) $(dlllflags) -out:$@ $(baselibs) @<<
-$**
-<<
-	-@del $*.exp
-
-$(PRJSTUBLIB): $(PRJSTUBOBJS)
-	$(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
-
-#---------------------------------------------------------------------
-# Implicit rules
-#---------------------------------------------------------------------
-
-{$(WINDIR)}.c{$(TMP_DIR)}.obj::
-    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
-    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
-    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
-$<
-<<
-
-{$(WINDIR)}.rc{$(TMP_DIR)}.res:
-	$(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
-!if $(DEBUG)
-	-d DEBUG \
-!endif
-!if $(TCL_THREADS)
-	-d TCL_THREADS \
-!endif
-!if $(STATIC_BUILD)
-	-d STATIC_BUILD \
-!endif
-	$<
-
-.SUFFIXES:
-.SUFFIXES:.c .rc
-
-#---------------------------------------------------------------------
-# Installation. (EDIT)
-#
-# You may need to modify this section to reflect the final distribution
-# of your files and possibly to generate documentation.
-#
-#---------------------------------------------------------------------
-
-install-binaries:
-	@echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
-	@if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
-	@$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
-
-install-libraries:
-        @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
-        @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
-        @echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
-        @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl"
-package ifneeded $(PROJECT) $(DOTVERSION) \
-    [list load [file join $$dir $(PRJLIBNAME)] sqlite3]
-<<
-
-install-docs:
-	@echo Installing documentation files to '$(DOC_INSTALL_DIR)'
-	@if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
-
-#---------------------------------------------------------------------
-# Clean up
-#---------------------------------------------------------------------
-
-clean:
-	@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
-	@if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
-
-realclean: clean
-	@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
-
-distclean: realclean
-	@if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
-	@if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj
diff --git a/tea/win/nmakehlp.c b/tea/win/nmakehlp.c
deleted file mode 100644
index e00f1b49965d..000000000000
--- a/tea/win/nmakehlp.c
+++ /dev/null
@@ -1,694 +0,0 @@
-/*
- * ----------------------------------------------------------------------------
- * nmakehlp.c --
- *
- *	This is used to fix limitations within nmake and the environment.
- *
- * Copyright (c) 2002 by David Gravereaux.
- * Copyright (c) 2006 by Pat Thoyts
- *
- * See the file "license.terms" for information on usage and redistribution of
- * this file, and for a DISCLAIMER OF ALL WARRANTIES.
- * ----------------------------------------------------------------------------
- */
-
-#define _CRT_SECURE_NO_DEPRECATE
-#include <windows.h>
-#define NO_SHLWAPI_GDI
-#define NO_SHLWAPI_STREAM
-#define NO_SHLWAPI_REG
-#include <shlwapi.h>
-#pragma comment (lib, "user32.lib")
-#pragma comment (lib, "kernel32.lib")
-#pragma comment (lib, "shlwapi.lib")
-#include <stdio.h>
-#include <math.h>
-
-/*
- * This library is required for x64 builds with _some_ versions of MSVC
- */
-#if defined(_M_IA64) || defined(_M_AMD64)
-#if _MSC_VER >= 1400 && _MSC_VER < 1500
-#pragma comment(lib, "bufferoverflowU")
-#endif
-#endif
-
-/* ISO hack for dumb VC++ */
-#ifdef _MSC_VER
-#define   snprintf	_snprintf
-#endif
-
-
-
-/* protos */
-
-static int CheckForCompilerFeature(const char *option);
-static int CheckForLinkerFeature(const char *option);
-static int IsIn(const char *string, const char *substring);
-static int SubstituteFile(const char *substs, const char *filename);
-static int QualifyPath(const char *path);
-static const char *GetVersionFromFile(const char *filename, const char *match);
-static DWORD WINAPI ReadFromPipe(LPVOID args);
-
-/* globals */
-
-#define CHUNK	25
-#define STATICBUFFERSIZE    1000
-typedef struct {
-    HANDLE pipe;
-    char buffer[STATICBUFFERSIZE];
-} pipeinfo;
-
-pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'};
-pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'};
-
-/*
- * exitcodes: 0 == no, 1 == yes, 2 == error
- */
-
-int
-main(
-    int argc,
-    char *argv[])
-{
-    char msg[300];
-    DWORD dwWritten;
-    int chars;
-
-    /*
-     * Make sure children (cl.exe and link.exe) are kept quiet.
-     */
-
-    SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX);
-
-    /*
-     * Make sure the compiler and linker aren't effected by the outside world.
-     */
-
-    SetEnvironmentVariable("CL", "");
-    SetEnvironmentVariable("LINK", "");
-
-    if (argc > 1 && *argv[1] == '-') {
-	switch (*(argv[1]+1)) {
-	case 'c':
-	    if (argc != 3) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-		        "usage: %s -c <compiler option>\n"
-			"Tests for whether cl.exe supports an option\n"
-			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-			&dwWritten, NULL);
-		return 2;
-	    }
-	    return CheckForCompilerFeature(argv[2]);
-	case 'l':
-	    if (argc != 3) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-	       		"usage: %s -l <linker option>\n"
-			"Tests for whether link.exe supports an option\n"
-			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-			&dwWritten, NULL);
-		return 2;
-	    }
-	    return CheckForLinkerFeature(argv[2]);
-	case 'f':
-	    if (argc == 2) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-			"usage: %s -f <string> <substring>\n"
-			"Find a substring within another\n"
-			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-			&dwWritten, NULL);
-		return 2;
-	    } else if (argc == 3) {
-		/*
-		 * If the string is blank, there is no match.
-		 */
-
-		return 0;
-	    } else {
-		return IsIn(argv[2], argv[3]);
-	    }
-	case 's':
-	    if (argc == 2) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-			"usage: %s -s <substitutions file> <file>\n"
-			"Perform a set of string map type substutitions on a file\n"
-			"exitcodes: 0\n",
-			argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-			&dwWritten, NULL);
-		return 2;
-	    }
-	    return SubstituteFile(argv[2], argv[3]);
-	case 'V':
-	    if (argc != 4) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-		    "usage: %s -V filename matchstring\n"
-		    "Extract a version from a file:\n"
-		    "eg: pkgIndex.tcl \"package ifneeded http\"",
-		    argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-		    &dwWritten, NULL);
-		return 0;
-	    }
-	    printf("%s\n", GetVersionFromFile(argv[2], argv[3]));
-	    return 0;
-	case 'Q':
-	    if (argc != 3) {
-		chars = snprintf(msg, sizeof(msg) - 1,
-		    "usage: %s -Q path\n"
-		    "Emit the fully qualified path\n"
-		    "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
-		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
-		    &dwWritten, NULL);
-		return 2;
-	    }
-	    return QualifyPath(argv[2]);
-	}
-    }
-    chars = snprintf(msg, sizeof(msg) - 1,
-	    "usage: %s -c|-f|-l|-Q|-s|-V ...\n"
-	    "This is a little helper app to equalize shell differences between WinNT and\n"
-	    "Win9x and get nmake.exe to accomplish its job.\n",
-	    argv[0]);
-    WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
-    return 2;
-}
-
-static int
-CheckForCompilerFeature(
-    const char *option)
-{
-    STARTUPINFO si;
-    PROCESS_INFORMATION pi;
-    SECURITY_ATTRIBUTES sa;
-    DWORD threadID;
-    char msg[300];
-    BOOL ok;
-    HANDLE hProcess, h, pipeThreads[2];
-    char cmdline[100];
-
-    hProcess = GetCurrentProcess();
-
-    ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
-    ZeroMemory(&si, sizeof(STARTUPINFO));
-    si.cb = sizeof(STARTUPINFO);
-    si.dwFlags   = STARTF_USESTDHANDLES;
-    si.hStdInput = INVALID_HANDLE_VALUE;
-
-    ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
-    sa.nLength = sizeof(SECURITY_ATTRIBUTES);
-    sa.lpSecurityDescriptor = NULL;
-    sa.bInheritHandle = FALSE;
-
-    /*
-     * Create a non-inheritible pipe.
-     */
-
-    CreatePipe(&Out.pipe, &h, &sa, 0);
-
-    /*
-     * Dupe the write side, make it inheritible, and close the original.
-     */
-
-    DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
-	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
-
-    /*
-     * Same as above, but for the error side.
-     */
-
-    CreatePipe(&Err.pipe, &h, &sa, 0);
-    DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
-	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
-
-    /*
-     * Base command line.
-     */
-
-    lstrcpy(cmdline, "cl.exe -nologo -c -TC -Zs -X -Fp.\\_junk.pch ");
-
-    /*
-     * Append our option for testing
-     */
-
-    lstrcat(cmdline, option);
-
-    /*
-     * Filename to compile, which exists, but is nothing and empty.
-     */
-
-    lstrcat(cmdline, " .\\nul");
-
-    ok = CreateProcess(
-	    NULL,	    /* Module name. */
-	    cmdline,	    /* Command line. */
-	    NULL,	    /* Process handle not inheritable. */
-	    NULL,	    /* Thread handle not inheritable. */
-	    TRUE,	    /* yes, inherit handles. */
-	    DETACHED_PROCESS, /* No console for you. */
-	    NULL,	    /* Use parent's environment block. */
-	    NULL,	    /* Use parent's starting directory. */
-	    &si,	    /* Pointer to STARTUPINFO structure. */
-	    &pi);	    /* Pointer to PROCESS_INFORMATION structure. */
-
-    if (!ok) {
-	DWORD err = GetLastError();
-	int chars = snprintf(msg, sizeof(msg) - 1,
-		"Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
-
-	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
-		FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
-		(300-chars), 0);
-	WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
-	return 2;
-    }
-
-    /*
-     * Close our references to the write handles that have now been inherited.
-     */
-
-    CloseHandle(si.hStdOutput);
-    CloseHandle(si.hStdError);
-
-    WaitForInputIdle(pi.hProcess, 5000);
-    CloseHandle(pi.hThread);
-
-    /*
-     * Start the pipe reader threads.
-     */
-
-    pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
-    pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
-
-    /*
-     * Block waiting for the process to end.
-     */
-
-    WaitForSingleObject(pi.hProcess, INFINITE);
-    CloseHandle(pi.hProcess);
-
-    /*
-     * Wait for our pipe to get done reading, should it be a little slow.
-     */
-
-    WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
-    CloseHandle(pipeThreads[0]);
-    CloseHandle(pipeThreads[1]);
-
-    /*
-     * Look for the commandline warning code in both streams.
-     *  - in MSVC 6 & 7 we get D4002, in MSVC 8 we get D9002.
-     */
-
-    return !(strstr(Out.buffer, "D4002") != NULL
-             || strstr(Err.buffer, "D4002") != NULL
-             || strstr(Out.buffer, "D9002") != NULL
-             || strstr(Err.buffer, "D9002") != NULL
-             || strstr(Out.buffer, "D2021") != NULL
-             || strstr(Err.buffer, "D2021") != NULL);
-}
-
-static int
-CheckForLinkerFeature(
-    const char *option)
-{
-    STARTUPINFO si;
-    PROCESS_INFORMATION pi;
-    SECURITY_ATTRIBUTES sa;
-    DWORD threadID;
-    char msg[300];
-    BOOL ok;
-    HANDLE hProcess, h, pipeThreads[2];
-    char cmdline[100];
-
-    hProcess = GetCurrentProcess();
-
-    ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
-    ZeroMemory(&si, sizeof(STARTUPINFO));
-    si.cb = sizeof(STARTUPINFO);
-    si.dwFlags   = STARTF_USESTDHANDLES;
-    si.hStdInput = INVALID_HANDLE_VALUE;
-
-    ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
-    sa.nLength = sizeof(SECURITY_ATTRIBUTES);
-    sa.lpSecurityDescriptor = NULL;
-    sa.bInheritHandle = TRUE;
-
-    /*
-     * Create a non-inheritible pipe.
-     */
-
-    CreatePipe(&Out.pipe, &h, &sa, 0);
-
-    /*
-     * Dupe the write side, make it inheritible, and close the original.
-     */
-
-    DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE,
-	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
-
-    /*
-     * Same as above, but for the error side.
-     */
-
-    CreatePipe(&Err.pipe, &h, &sa, 0);
-    DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE,
-	    DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
-
-    /*
-     * Base command line.
-     */
-
-    lstrcpy(cmdline, "link.exe -nologo ");
-
-    /*
-     * Append our option for testing.
-     */
-
-    lstrcat(cmdline, option);
-
-    ok = CreateProcess(
-	    NULL,	    /* Module name. */
-	    cmdline,	    /* Command line. */
-	    NULL,	    /* Process handle not inheritable. */
-	    NULL,	    /* Thread handle not inheritable. */
-	    TRUE,	    /* yes, inherit handles. */
-	    DETACHED_PROCESS, /* No console for you. */
-	    NULL,	    /* Use parent's environment block. */
-	    NULL,	    /* Use parent's starting directory. */
-	    &si,	    /* Pointer to STARTUPINFO structure. */
-	    &pi);	    /* Pointer to PROCESS_INFORMATION structure. */
-
-    if (!ok) {
-	DWORD err = GetLastError();
-	int chars = snprintf(msg, sizeof(msg) - 1,
-		"Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
-
-	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS|
-		FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars],
-		(300-chars), 0);
-	WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, lstrlen(msg), &err,NULL);
-	return 2;
-    }
-
-    /*
-     * Close our references to the write handles that have now been inherited.
-     */
-
-    CloseHandle(si.hStdOutput);
-    CloseHandle(si.hStdError);
-
-    WaitForInputIdle(pi.hProcess, 5000);
-    CloseHandle(pi.hThread);
-
-    /*
-     * Start the pipe reader threads.
-     */
-
-    pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
-    pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
-
-    /*
-     * Block waiting for the process to end.
-     */
-
-    WaitForSingleObject(pi.hProcess, INFINITE);
-    CloseHandle(pi.hProcess);
-
-    /*
-     * Wait for our pipe to get done reading, should it be a little slow.
-     */
-
-    WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
-    CloseHandle(pipeThreads[0]);
-    CloseHandle(pipeThreads[1]);
-
-    /*
-     * Look for the commandline warning code in the stderr stream.
-     */
-
-    return !(strstr(Out.buffer, "LNK1117") != NULL ||
-	    strstr(Err.buffer, "LNK1117") != NULL ||
-	    strstr(Out.buffer, "LNK4044") != NULL ||
-	    strstr(Err.buffer, "LNK4044") != NULL);
-}
-
-static DWORD WINAPI
-ReadFromPipe(
-    LPVOID args)
-{
-    pipeinfo *pi = (pipeinfo *) args;
-    char *lastBuf = pi->buffer;
-    DWORD dwRead;
-    BOOL ok;
-
-  again:
-    if (lastBuf - pi->buffer + CHUNK > STATICBUFFERSIZE) {
-	CloseHandle(pi->pipe);
-	return (DWORD)-1;
-    }
-    ok = ReadFile(pi->pipe, lastBuf, CHUNK, &dwRead, 0L);
-    if (!ok || dwRead == 0) {
-	CloseHandle(pi->pipe);
-	return 0;
-    }
-    lastBuf += dwRead;
-    goto again;
-
-    return 0;  /* makes the compiler happy */
-}
-
-static int
-IsIn(
-    const char *string,
-    const char *substring)
-{
-    return (strstr(string, substring) != NULL);
-}
-
-/*
- * GetVersionFromFile --
- * 	Looks for a match string in a file and then returns the version
- * 	following the match where a version is anything acceptable to
- * 	package provide or package ifneeded.
- */
-
-static const char *
-GetVersionFromFile(
-    const char *filename,
-    const char *match)
-{
-    size_t cbBuffer = 100;
-    static char szBuffer[100];
-    char *szResult = NULL;
-    FILE *fp = fopen(filename, "rt");
-
-    if (fp != NULL) {
-	/*
-	 * Read data until we see our match string.
-	 */
-
-	while (fgets(szBuffer, cbBuffer, fp) != NULL) {
-	    LPSTR p, q;
-
-	    p = strstr(szBuffer, match);
-	    if (p != NULL) {
-		/*
-		 * Skip to first digit.
-		 */
-
-		while (*p && !isdigit(*p)) {
-		    ++p;
-		}
-
-		/*
-		 * Find ending whitespace.
-		 */
-
-		q = p;
-		while (*q && (isalnum(*q) || *q == '.')) {
-		    ++q;
-		}
-
-		memcpy(szBuffer, p, q - p);
-		szBuffer[q-p] = 0;
-		szResult = szBuffer;
-		break;
-	    }
-	}
-	fclose(fp);
-    }
-    return szResult;
-}
-
-/*
- * List helpers for the SubstituteFile function
- */
-
-typedef struct list_item_t {
-    struct list_item_t *nextPtr;
-    char * key;
-    char * value;
-} list_item_t;
-
-/* insert a list item into the list (list may be null) */
-static list_item_t *
-list_insert(list_item_t **listPtrPtr, const char *key, const char *value)
-{
-    list_item_t *itemPtr = malloc(sizeof(list_item_t));
-    if (itemPtr) {
-	itemPtr->key = strdup(key);
-	itemPtr->value = strdup(value);
-	itemPtr->nextPtr = NULL;
-
-	while(*listPtrPtr) {
-	    listPtrPtr = &(*listPtrPtr)->nextPtr;
-	}
-	*listPtrPtr = itemPtr;
-    }
-    return itemPtr;
-}
-
-static void
-list_free(list_item_t **listPtrPtr)
-{
-    list_item_t *tmpPtr, *listPtr = *listPtrPtr;
-    while (listPtr) {
-	tmpPtr = listPtr;
-	listPtr = listPtr->nextPtr;
-	free(tmpPtr->key);
-	free(tmpPtr->value);
-	free(tmpPtr);
-    }
-}
-
-/*
- * SubstituteFile --
- *	As windows doesn't provide anything useful like sed and it's unreliable
- *	to use the tclsh you are building against (consider x-platform builds -
- *	eg compiling AMD64 target from IX86) we provide a simple substitution
- *	option here to handle autoconf style substitutions.
- *	The substitution file is whitespace and line delimited. The file should
- *	consist of lines matching the regular expression:
- *	  \s*\S+\s+\S*$
- *
- *	Usage is something like:
- *	  nmakehlp -S << $** > $@
- *        @PACKAGE_NAME@ $(PACKAGE_NAME)
- *        @PACKAGE_VERSION@ $(PACKAGE_VERSION)
- *        <<
- */
-
-static int
-SubstituteFile(
-    const char *substitutions,
-    const char *filename)
-{
-    size_t cbBuffer = 1024;
-    static char szBuffer[1024], szCopy[1024];
-    char *szResult = NULL;
-    list_item_t *substPtr = NULL;
-    FILE *fp, *sp;
-
-    fp = fopen(filename, "rt");
-    if (fp != NULL) {
-
-	/*
-	 * Build a list of substutitions from the first filename
-	 */
-
-	sp = fopen(substitutions, "rt");
-	if (sp != NULL) {
-	    while (fgets(szBuffer, cbBuffer, sp) != NULL) {
-		unsigned char *ks, *ke, *vs, *ve;
-		ks = (unsigned char*)szBuffer;
-		while (ks && *ks && isspace(*ks)) ++ks;
-		ke = ks;
-		while (ke && *ke && !isspace(*ke)) ++ke;
-		vs = ke;
-		while (vs && *vs && isspace(*vs)) ++vs;
-		ve = vs;
-		while (ve && *ve && !(*ve == '\r' || *ve == '\n')) ++ve;
-		*ke = 0, *ve = 0;
-		list_insert(&substPtr, (char*)ks, (char*)vs);
-	    }
-	    fclose(sp);
-	}
-
-	/* debug: dump the list */
-#ifdef _DEBUG
-	{
-	    int n = 0;
-	    list_item_t *p = NULL;
-	    for (p = substPtr; p != NULL; p = p->nextPtr, ++n) {
-		fprintf(stderr, "% 3d '%s' => '%s'\n", n, p->key, p->value);
-	    }
-	}
-#endif
-	
-	/*
-	 * Run the substitutions over each line of the input
-	 */
-	
-	while (fgets(szBuffer, cbBuffer, fp) != NULL) {
-	    list_item_t *p = NULL;
-	    for (p = substPtr; p != NULL; p = p->nextPtr) {
-		char *m = strstr(szBuffer, p->key);
-		if (m) {
-		    char *cp, *op, *sp;
-		    cp = szCopy;
-		    op = szBuffer;
-		    while (op != m) *cp++ = *op++;
-		    sp = p->value;
-		    while (sp && *sp) *cp++ = *sp++;
-		    op += strlen(p->key);
-		    while (*op) *cp++ = *op++;
-		    *cp = 0;
-		    memcpy(szBuffer, szCopy, sizeof(szCopy));
-		}
-	    }
-	    printf(szBuffer);
-	}
-	
-	list_free(&substPtr);
-    }
-    fclose(fp);
-    return 0;
-}
-
-/*
- * QualifyPath --
- *
- *	This composes the current working directory with a provided path
- *	and returns the fully qualified and normalized path.
- *	Mostly needed to setup paths for testing.
- */
-
-static int
-QualifyPath(
-    const char *szPath)
-{
-    char szCwd[MAX_PATH + 1];
-    char szTmp[MAX_PATH + 1];
-    char *p;
-    GetCurrentDirectory(MAX_PATH, szCwd);
-    while ((p = strchr(szPath, '/')) && *p)
-	*p = '\\';
-    PathCombine(szTmp, szCwd, szPath);
-    PathCanonicalize(szCwd, szTmp);
-    printf("%s\n", szCwd);
-    return 0;
-}
-
-/*
- * Local variables:
- *   mode: c
- *   c-basic-offset: 4
- *   fill-column: 78
- *   indent-tabs-mode: t
- *   tab-width: 8
- * End:
- */
diff --git a/tea/win/rules.vc b/tea/win/rules.vc
deleted file mode 100644
index 99471053c8c0..000000000000
--- a/tea/win/rules.vc
+++ /dev/null
@@ -1,711 +0,0 @@
-#------------------------------------------------------------------------------
-# rules.vc --
-#
-#	Microsoft Visual C++ makefile include for decoding the commandline
-#	macros.  This file does not need editing to build Tcl.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# Copyright (c) 2001-2003 David Gravereaux.
-# Copyright (c) 2003-2008 Patrick Thoyts
-#------------------------------------------------------------------------------
-
-!ifndef _RULES_VC
-_RULES_VC = 1
-
-cc32		= $(CC)   # built-in default.
-link32		= link
-lib32		= lib
-rc32		= $(RC)   # built-in default.
-
-!ifndef INSTALLDIR
-### Assume the normal default.
-_INSTALLDIR	= C:\Program Files\Tcl
-!else
-### Fix the path separators.
-_INSTALLDIR	= $(INSTALLDIR:/=\)
-!endif
-
-#----------------------------------------------------------
-# Set the proper copy method to avoid overwrite questions
-# to the user when copying files and selecting the right
-# "delete all" method.
-#----------------------------------------------------------
-
-!if "$(OS)" == "Windows_NT"
-RMDIR	= rmdir /S /Q
-ERRNULL  = 2>NUL
-!if ![ver | find "4.0" > nul]
-CPY	= echo y | xcopy /i >NUL
-COPY	= copy >NUL
-!else
-CPY	= xcopy /i /y >NUL
-COPY	= copy /y >NUL
-!endif
-!else # "$(OS)" != "Windows_NT"
-CPY	= xcopy /i >_JUNK.OUT # On Win98 NUL does not work here.
-COPY	= copy >_JUNK.OUT # On Win98 NUL does not work here.
-RMDIR	= deltree /Y
-NULL    = \NUL # Used in testing directory existence
-ERRNULL = >NUL # Win9x shell cannot redirect stderr
-!endif
-MKDIR   = mkdir
-
-#------------------------------------------------------------------------------
-# Determine the host and target architectures and compiler version.
-#------------------------------------------------------------------------------
-
-_HASH=^#
-_VC_MANIFEST_EMBED_EXE=
-_VC_MANIFEST_EMBED_DLL=
-VCVER=0
-!if ![echo VCVERSION=_MSC_VER > vercl.x] \
-    && ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \
-    && ![echo ARCH=IX86 >> vercl.x] \
-    && ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \
-    && ![echo ARCH=AMD64 >> vercl.x] \
-    && ![echo $(_HASH)endif >> vercl.x] \
-    && ![cl -nologo -TC -P vercl.x $(ERRNULL)]
-!include vercl.i
-!if ![echo VCVER= ^\> vercl.vc] \
-    && ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc]
-!include vercl.vc
-!endif
-!endif
-!if ![del $(ERRNUL) /q/f vercl.x vercl.i vercl.vc]
-!endif
-
-!if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86]
-NATIVE_ARCH=IX86
-!else
-NATIVE_ARCH=AMD64
-!endif
-
-# Since MSVC8 we must deal with manifest resources.
-!if $(VCVERSION) >= 1400
-_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1
-_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2
-!endif
-
-!ifndef MACHINE
-MACHINE=$(ARCH)
-!endif
-
-!ifndef CFG_ENCODING
-CFG_ENCODING	= \"cp1252\"
-!endif
-
-!message ===============================================================================
-
-#----------------------------------------------------------
-# build the helper app we need to overcome nmake's limiting
-# environment.
-#----------------------------------------------------------
-
-!if !exist(nmakehlp.exe)
-!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul]
-!endif
-!endif
-
-#----------------------------------------------------------
-# Test for compiler features
-#----------------------------------------------------------
-
-### test for optimizations
-!if [nmakehlp -c -Ot]
-!message *** Compiler has 'Optimizations'
-OPTIMIZING	= 1
-!else
-!message *** Compiler does not have 'Optimizations'
-OPTIMIZING	= 0
-!endif
-
-OPTIMIZATIONS   =
-
-!if [nmakehlp -c -Ot]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -Ot
-!endif
-
-!if [nmakehlp -c -Oi]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -Oi
-!endif
-
-!if [nmakehlp -c -Op]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -Op
-!endif
-
-!if [nmakehlp -c -fp:strict]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -fp:strict
-!endif
-
-!if [nmakehlp -c -Gs]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -Gs
-!endif
-
-!if [nmakehlp -c -GS]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -GS
-!endif
-
-!if [nmakehlp -c -GL]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -GL
-!endif
-
-DEBUGFLAGS     =
-
-!if [nmakehlp -c -RTC1]
-DEBUGFLAGS     = $(DEBUGFLAGS) -RTC1
-!elseif [nmakehlp -c -GZ]
-DEBUGFLAGS     = $(DEBUGFLAGS) -GZ
-!endif
-
-COMPILERFLAGS  =-W3 -DUNICODE -D_UNICODE
-
-# In v13 -GL and -YX are incompatible.
-!if [nmakehlp -c -YX]
-!if ![nmakehlp -c -GL]
-OPTIMIZATIONS  = $(OPTIMIZATIONS) -YX
-!endif
-!endif
-
-!if "$(MACHINE)" == "IX86"
-### test for pentium errata
-!if [nmakehlp -c -QI0f]
-!message *** Compiler has 'Pentium 0x0f fix'
-COMPILERFLAGS  = $(COMPILERFLAGS) -QI0f
-!else
-!message *** Compiler does not have 'Pentium 0x0f fix'
-!endif
-!endif
-
-!if "$(MACHINE)" == "IA64"
-### test for Itanium errata
-!if [nmakehlp -c -QIA64_Bx]
-!message *** Compiler has 'B-stepping errata workarounds'
-COMPILERFLAGS   = $(COMPILERFLAGS) -QIA64_Bx
-!else
-!message *** Compiler does not have 'B-stepping errata workarounds'
-!endif
-!endif
-
-!if "$(MACHINE)" == "IX86"
-### test for -align:4096, when align:512 will do.
-!if [nmakehlp -l -opt:nowin98]
-!message *** Linker has 'Win98 alignment problem'
-ALIGN98_HACK	= 1
-!else
-!message *** Linker does not have 'Win98 alignment problem'
-ALIGN98_HACK	= 0
-!endif
-!else
-ALIGN98_HACK	= 0
-!endif
-
-LINKERFLAGS     =
-
-!if [nmakehlp -l -ltcg]
-LINKERFLAGS     =-ltcg
-!endif
-
-#----------------------------------------------------------
-# Decode the options requested.
-#----------------------------------------------------------
-
-!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"]
-STATIC_BUILD	= 0
-TCL_THREADS	= 1
-DEBUG		= 0
-SYMBOLS		= 0
-PROFILE		= 0
-PGO		= 0
-MSVCRT		= 0
-LOIMPACT	= 0
-TCL_USE_STATIC_PACKAGES	= 0
-USE_THREAD_ALLOC = 1
-UNCHECKED	= 0
-!else
-!if [nmakehlp -f $(OPTS) "static"]
-!message *** Doing static
-STATIC_BUILD	= 1
-!else
-STATIC_BUILD	= 0
-!endif
-!if [nmakehlp -f $(OPTS) "msvcrt"]
-!message *** Doing msvcrt
-MSVCRT		= 1
-!else
-MSVCRT		= 0
-!endif
-!if [nmakehlp -f $(OPTS) "staticpkg"]
-!message *** Doing staticpkg
-TCL_USE_STATIC_PACKAGES	= 1
-!else
-TCL_USE_STATIC_PACKAGES	= 0
-!endif
-!if [nmakehlp -f $(OPTS) "nothreads"]
-!message *** Compile explicitly for non-threaded tcl
-TCL_THREADS	= 0
-!else
-TCL_THREADS	= 1
-USE_THREAD_ALLOC= 1
-!endif
-!if [nmakehlp -f $(OPTS) "symbols"]
-!message *** Doing symbols
-DEBUG		= 1
-!else
-DEBUG		= 0
-!endif
-!if [nmakehlp -f $(OPTS) "pdbs"]
-!message *** Doing pdbs
-SYMBOLS		= 1
-!else
-SYMBOLS		= 0
-!endif
-!if [nmakehlp -f $(OPTS) "profile"]
-!message *** Doing profile
-PROFILE		= 1
-!else
-PROFILE		= 0
-!endif
-!if [nmakehlp -f $(OPTS) "pgi"]
-!message *** Doing profile guided optimization instrumentation
-PGO		= 1
-!elseif [nmakehlp -f $(OPTS) "pgo"]
-!message *** Doing profile guided optimization
-PGO		= 2
-!else
-PGO		= 0
-!endif
-!if [nmakehlp -f $(OPTS) "loimpact"]
-!message *** Doing loimpact
-LOIMPACT	= 1
-!else
-LOIMPACT	= 0
-!endif
-!if [nmakehlp -f $(OPTS) "thrdalloc"]
-!message *** Doing thrdalloc
-USE_THREAD_ALLOC = 1
-!endif
-!if [nmakehlp -f $(OPTS) "tclalloc"]
-!message *** Doing tclalloc
-USE_THREAD_ALLOC = 0
-!endif
-!if [nmakehlp -f $(OPTS) "unchecked"]
-!message *** Doing unchecked
-UNCHECKED = 1
-!else
-UNCHECKED = 0
-!endif
-!endif
-
-
-!if !$(STATIC_BUILD)
-# Make sure we don't build overly fat DLLs.
-MSVCRT		= 1
-# We shouldn't statically put the extensions inside the shell when dynamic.
-TCL_USE_STATIC_PACKAGES = 0
-!endif
-
-
-#----------------------------------------------------------
-# Figure-out how to name our intermediate and output directories.
-# We wouldn't want different builds to use the same .obj files
-# by accident.
-#----------------------------------------------------------
-
-#----------------------------------------
-# Naming convention:
-#   t = full thread support.
-#   s = static library (as opposed to an
-#	import library)
-#   g = linked to the debug enabled C
-#	run-time.
-#   x = special static build when it
-#	links to the dynamic C run-time.
-#----------------------------------------
-SUFX	    = tsgx
-
-!if $(DEBUG)
-BUILDDIRTOP = Debug
-!else
-BUILDDIRTOP = Release
-!endif
-
-!if "$(MACHINE)" != "IX86"
-BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE)
-!endif
-!if $(VCVER) > 6
-BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER)
-!endif
-
-!if !$(DEBUG) || $(DEBUG) && $(UNCHECKED)
-SUFX	    = $(SUFX:g=)
-!endif
-
-TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX
-
-!if !$(STATIC_BUILD)
-TMP_DIRFULL = $(TMP_DIRFULL:Static=)
-SUFX	    = $(SUFX:s=)
-EXT	    = dll
-!if $(MSVCRT)
-TMP_DIRFULL = $(TMP_DIRFULL:X=)
-SUFX	    = $(SUFX:x=)
-!endif
-!else
-TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=)
-EXT	    = lib
-!if !$(MSVCRT)
-TMP_DIRFULL = $(TMP_DIRFULL:X=)
-SUFX	    = $(SUFX:x=)
-!endif
-!endif
-
-!if !$(TCL_THREADS)
-TMP_DIRFULL = $(TMP_DIRFULL:Threaded=)
-SUFX	    = $(SUFX:t=)
-!endif
-
-!ifndef TMP_DIR
-TMP_DIR	    = $(TMP_DIRFULL)
-!ifndef OUT_DIR
-OUT_DIR	    = .\$(BUILDDIRTOP)
-!endif
-!else
-!ifndef OUT_DIR
-OUT_DIR	    = $(TMP_DIR)
-!endif
-!endif
-
-
-#----------------------------------------------------------
-# Decode the statistics requested.
-#----------------------------------------------------------
-
-!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"]
-TCL_MEM_DEBUG	    = 0
-TCL_COMPILE_DEBUG   = 0
-!else
-!if [nmakehlp -f $(STATS) "memdbg"]
-!message *** Doing memdbg
-TCL_MEM_DEBUG	    = 1
-!else
-TCL_MEM_DEBUG	    = 0
-!endif
-!if [nmakehlp -f $(STATS) "compdbg"]
-!message *** Doing compdbg
-TCL_COMPILE_DEBUG   = 1
-!else
-TCL_COMPILE_DEBUG   = 0
-!endif
-!endif
-
-
-#----------------------------------------------------------
-# Decode the checks requested.
-#----------------------------------------------------------
-
-!if "$(CHECKS)" == "" || [nmakehlp -f "$(CHECKS)" "none"]
-TCL_NO_DEPRECATED	    = 0
-WARNINGS		    = -W3
-!else
-!if [nmakehlp -f $(CHECKS) "nodep"]
-!message *** Doing nodep check
-TCL_NO_DEPRECATED	    = 1
-!else
-TCL_NO_DEPRECATED	    = 0
-!endif
-!if [nmakehlp -f $(CHECKS) "fullwarn"]
-!message *** Doing full warnings check
-WARNINGS		    = -W4
-!if [nmakehlp -l -warn:3]
-LINKERFLAGS		    = $(LINKERFLAGS) -warn:3
-!endif
-!else
-WARNINGS		    = -W3
-!endif
-!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64]
-!message *** Doing 64bit portability warnings
-WARNINGS		    = $(WARNINGS) -Wp64
-!endif
-!endif
-
-!if $(PGO) > 1
-!if [nmakehlp -l -ltcg:pgoptimize]
-LINKERFLAGS	= $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize
-!else
-MSG=^
-This compiler does not support profile guided optimization.
-!error $(MSG)
-!endif
-!elseif $(PGO) > 0
-!if [nmakehlp -l -ltcg:pginstrument]
-LINKERFLAGS	= $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument
-!else
-MSG=^
-This compiler does not support profile guided optimization.
-!error $(MSG)
-!endif
-!endif
-
-#----------------------------------------------------------
-# Set our defines now armed with our options.
-#----------------------------------------------------------
-
-OPTDEFINES	= -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS
-
-!if $(TCL_MEM_DEBUG)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_MEM_DEBUG
-!endif
-!if $(TCL_COMPILE_DEBUG)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
-!endif
-!if $(TCL_THREADS)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_THREADS=1
-!if $(USE_THREAD_ALLOC)
-OPTDEFINES	= $(OPTDEFINES) -DUSE_THREAD_ALLOC=1
-!endif
-!endif
-!if $(STATIC_BUILD)
-OPTDEFINES	= $(OPTDEFINES) -DSTATIC_BUILD
-!endif
-!if $(TCL_NO_DEPRECATED)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_NO_DEPRECATED
-!endif
-
-!if !$(DEBUG)
-OPTDEFINES	= $(OPTDEFINES) -DNDEBUG
-!if $(OPTIMIZING)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_OPTIMIZED
-!endif
-!endif
-!if $(PROFILE)
-OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_PROFILED
-!endif
-!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
-OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_DO64BIT
-!endif
-!if $(VCVERSION) < 1300
-OPTDEFINES	= $(OPTDEFINES) -DNO_STRTOI64
-!endif
-
-#----------------------------------------------------------
-# Locate the Tcl headers to build against
-#----------------------------------------------------------
-
-!if "$(PROJECT)" == "tcl"
-
-_TCL_H          = ..\generic\tcl.h
-
-!else
-
-# If INSTALLDIR set to tcl root dir then reset to the lib dir.
-!if exist("$(_INSTALLDIR)\include\tcl.h")
-_INSTALLDIR=$(_INSTALLDIR)\lib
-!endif
-
-!if !defined(TCLDIR)
-!if exist("$(_INSTALLDIR)\..\include\tcl.h")
-TCLINSTALL	= 1
-_TCLDIR		= $(_INSTALLDIR)\..
-_TCL_H          = $(_INSTALLDIR)\..\include\tcl.h
-TCLDIR          = $(_INSTALLDIR)\..
-!else
-MSG=^
-Failed to find tcl.h.  Set the TCLDIR macro.
-!error $(MSG)
-!endif
-!else
-_TCLDIR	= $(TCLDIR:/=\)
-!if exist("$(_TCLDIR)\include\tcl.h")
-TCLINSTALL	= 1
-_TCL_H          = $(_TCLDIR)\include\tcl.h
-!elseif exist("$(_TCLDIR)\generic\tcl.h")
-TCLINSTALL	= 0
-_TCL_H          = $(_TCLDIR)\generic\tcl.h
-!else
-MSG =^
-Failed to find tcl.h.  The TCLDIR macro does not appear correct.
-!error $(MSG)
-!endif
-!endif
-!endif
-
-#--------------------------------------------------------------
-# Extract various version numbers from tcl headers
-# The generated file is then included in the makefile.
-#--------------------------------------------------------------
-
-!if [echo REM = This file is generated from rules.vc > versions.vc]
-!endif
-!if [echo TCL_MAJOR_VERSION = \>> versions.vc] \
-   && [nmakehlp -V "$(_TCL_H)" TCL_MAJOR_VERSION >> versions.vc]
-!endif
-!if [echo TCL_MINOR_VERSION = \>> versions.vc] \
-   && [nmakehlp -V "$(_TCL_H)" TCL_MINOR_VERSION >> versions.vc]
-!endif
-!if [echo TCL_PATCH_LEVEL = \>> versions.vc] \
-   && [nmakehlp -V "$(_TCL_H)" TCL_PATCH_LEVEL >> versions.vc]
-!endif
-
-# If building the tcl core then we need additional package versions
-!if "$(PROJECT)" == "tcl"
-!if [echo PKG_HTTP_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\http\pkgIndex.tcl http >> versions.vc]
-!endif
-!if [echo PKG_TCLTEST_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\tcltest\pkgIndex.tcl tcltest >> versions.vc]
-!endif
-!if [echo PKG_MSGCAT_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\msgcat\pkgIndex.tcl msgcat >> versions.vc]
-!endif
-!if [echo PKG_PLATFORM_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform " >> versions.vc]
-!endif
-!if [echo PKG_SHELL_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform::shell" >> versions.vc]
-!endif
-!if [echo PKG_DDE_VER = \>> versions.vc] \
-   && [nmakehlp -V ..\library\dde\pkgIndex.tcl "dde " >> versions.vc]
-!endif
-!if [echo PKG_REG_VER =\>> versions.vc] \
-   && [nmakehlp -V ..\library\reg\pkgIndex.tcl registry >> versions.vc]
-!endif
-!endif
-
-!include versions.vc
-
-#--------------------------------------------------------------
-# Setup tcl version dependent stuff headers
-#--------------------------------------------------------------
-
-!if "$(PROJECT)" != "tcl"
-
-TCL_VERSION	= $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION)
-
-!if $(TCL_VERSION) < 81
-TCL_DOES_STUBS	= 0
-!else
-TCL_DOES_STUBS	= 1
-!endif
-
-!if $(TCLINSTALL)
-TCLSH		= "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe"
-!if !exist($(TCLSH)) && $(TCL_THREADS)
-TCLSH           = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe"
-!endif
-TCLSTUBLIB	= "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib"
-TCLIMPLIB	= "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib"
-TCL_LIBRARY	= $(_TCLDIR)\lib
-TCLREGLIB	= "$(_TCLDIR)\lib\tclreg13$(SUFX:t=).lib"
-TCLDDELIB	= "$(_TCLDIR)\lib\tcldde14$(SUFX:t=).lib"
-COFFBASE	= \must\have\tcl\sources\to\build\this\target
-TCLTOOLSDIR	= \must\have\tcl\sources\to\build\this\target
-TCL_INCLUDES    = -I"$(_TCLDIR)\include"
-!else
-TCLSH		= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe"
-!if !exist($(TCLSH)) && $(TCL_THREADS)
-TCLSH		= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe"
-!endif
-TCLSTUBLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib"
-TCLIMPLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib"
-TCL_LIBRARY	= $(_TCLDIR)\library
-TCLREGLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg13$(SUFX:t=).lib"
-TCLDDELIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde14$(SUFX:t=).lib"
-COFFBASE	= "$(_TCLDIR)\win\coffbase.txt"
-TCLTOOLSDIR	= $(_TCLDIR)\tools
-TCL_INCLUDES	= -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win"
-!endif
-
-!endif
-
-#-------------------------------------------------------------------------
-# Locate the Tk headers to build against
-#-------------------------------------------------------------------------
-
-!if "$(PROJECT)" == "tk"
-_TK_H          = ..\generic\tk.h
-_INSTALLDIR    = $(_INSTALLDIR)\..
-!endif
-
-!ifdef PROJECT_REQUIRES_TK
-!if !defined(TKDIR)
-!if exist("$(_INSTALLDIR)\..\include\tk.h")
-TKINSTALL      = 1
-_TKDIR         = $(_INSTALLDIR)\..
-_TK_H          = $(_TKDIR)\include\tk.h
-TKDIR          = $(_TKDIR)
-!elseif exist("$(_TCLDIR)\include\tk.h")
-TKINSTALL      = 1
-_TKDIR         = $(_TCLDIR)
-_TK_H          = $(_TKDIR)\include\tk.h
-TKDIR          = $(_TKDIR)
-!endif
-!else
-_TKDIR = $(TKDIR:/=\)
-!if exist("$(_TKDIR)\include\tk.h")
-TKINSTALL      = 1
-_TK_H          = $(_TKDIR)\include\tk.h
-!elseif exist("$(_TKDIR)\generic\tk.h")
-TKINSTALL      = 0
-_TK_H          = $(_TKDIR)\generic\tk.h
-!else
-MSG =^
-Failed to find tk.h. The TKDIR macro does not appear correct.
-!error $(MSG)
-!endif
-!endif
-!endif
-
-#-------------------------------------------------------------------------
-# Extract Tk version numbers
-#-------------------------------------------------------------------------
-
-!if defined(PROJECT_REQUIRES_TK) || "$(PROJECT)" == "tk"
-
-!if [echo TK_MAJOR_VERSION = \>> versions.vc] \
-   && [nmakehlp -V $(_TK_H) TK_MAJOR_VERSION >> versions.vc]
-!endif
-!if [echo TK_MINOR_VERSION = \>> versions.vc] \
-   && [nmakehlp -V $(_TK_H) TK_MINOR_VERSION >> versions.vc]
-!endif
-!if [echo TK_PATCH_LEVEL = \>> versions.vc] \
-   && [nmakehlp -V $(_TK_H) TK_PATCH_LEVEL >> versions.vc]
-!endif
-
-!include versions.vc
-
-TK_DOTVERSION	= $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION)
-TK_VERSION	= $(TK_MAJOR_VERSION)$(TK_MINOR_VERSION)
-
-!if "$(PROJECT)" != "tk"
-!if $(TKINSTALL)
-WISH		= "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe"
-TKSTUBLIB	= "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib"
-TKIMPLIB	= "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib"
-TK_INCLUDES     = -I"$(_TKDIR)\include"
-!else
-WISH		= "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe"
-TKSTUBLIB	= "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib"
-TKIMPLIB	= "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib"
-TK_INCLUDES     = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib"
-!endif
-!endif
-
-!endif
-
-#----------------------------------------------------------
-# Display stats being used.
-#----------------------------------------------------------
-
-!message *** Intermediate directory will be '$(TMP_DIR)'
-!message *** Output directory will be '$(OUT_DIR)'
-!message *** Suffix for binaries will be '$(SUFX)'
-!message *** Optional defines are '$(OPTDEFINES)'
-!message *** Compiler version $(VCVER). Target machine is $(MACHINE)
-!message *** Host architecture is $(NATIVE_ARCH)
-!message *** Compiler options '$(COMPILERFLAGS) $(OPTIMIZATIONS) $(DEBUGFLAGS) $(WARNINGS)'
-!message *** Link options '$(LINKERFLAGS)'
-
-!endif
-