1494 files changed, 230911 insertions, 2818 deletions

diff --git a/Bindings/arm/altera/socfpga-sdram-edac.txt b/Bindings/arm/altera/socfpga-sdram-edac.txt
new file mode 100644
index 000000000000..d0ce01da5c59
--- /dev/null
+++ b/Bindings/arm/altera/socfpga-sdram-edac.txt
@@ -0,0 +1,15 @@
+Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
+The EDAC accesses a range of registers in the SDRAM controller.
+
+Required properties:
+- compatible : should contain "altr,sdram-edac";
+- altr,sdr-syscon : phandle of the sdr module
+- interrupts : Should contain the SDRAM ECC IRQ in the
+	appropriate format for the IRQ controller.
+
+Example:
+	sdramedac {
+		compatible = "altr,sdram-edac";
+		altr,sdr-syscon = <&sdr>;
+		interrupts = <0 39 4>;
+	};
diff --git a/Bindings/arm/amlogic.txt b/Bindings/arm/amlogic.txt
new file mode 100644
index 000000000000..8fe815046140
--- /dev/null
+++ b/Bindings/arm/amlogic.txt
@@ -0,0 +1,10 @@
+Amlogic MesonX device tree bindings
+-------------------------------------------
+
+Boards with the Amlogic Meson6 SoC shall have the following properties:
+  Required root node property:
+    compatible: "amlogic,meson6"
+
+Boards with the Amlogic Meson8 SoC shall have the following properties:
+  Required root node property:
+    compatible: "amlogic,meson8";
diff --git a/Bindings/arm/arch_timer.txt b/Bindings/arm/arch_timer.txt
index 37b2cafa4e52..256b4d8bab7b 100644
--- a/Bindings/arm/arch_timer.txt
+++ b/Bindings/arm/arch_timer.txt
@@ -22,6 +22,14 @@ to deliver its interrupts via SPIs.
 - always-on : a boolean property. If present, the timer is powered through an
   always-on power domain, therefore it never loses context.
 
+** Optional properties:
+
+- arm,cpu-registers-not-fw-configured : Firmware does not initialize
+  any of the generic timer CPU registers, which contain their
+  architecturally-defined reset values. Only supported for 32-bit
+  systems which follow the ARMv7 architected reset values.
+
+
 Example:
 
 	timer {
diff --git a/Bindings/arm/arm-boards b/Bindings/arm/arm-boards
index c554ed3d44fb..b78564b2b201 100644
--- a/Bindings/arm/arm-boards
+++ b/Bindings/arm/arm-boards
@@ -23,7 +23,7 @@ Required nodes:
     range of 0x200 bytes.
 
 - syscon: the root node of the Integrator platforms must have a
-  system controller node pointong to the control registers,
+  system controller node pointing to the control registers,
   with the compatible string
   "arm,integrator-ap-syscon"
   "arm,integrator-cp-syscon"
@@ -92,3 +92,68 @@ Required nodes:
 - core-module: the root node to the Versatile platforms must have
   a core-module with regs and the compatible strings
   "arm,core-module-versatile", "syscon"
+
+ARM RealView Boards
+-------------------
+The RealView boards cover tailored evaluation boards that are used to explore
+the ARM11 and Cortex A-8 and Cortex A-9 processors.
+
+Required properties (in root node):
+	/* RealView Emulation Baseboard */
+	compatible = "arm,realview-eb";
+	 /* RealView Platform Baseboard for ARM1176JZF-S */
+	compatible = "arm,realview-pb1176";
+	/* RealView Platform Baseboard for ARM11 MPCore */
+	compatible = "arm,realview-pb11mp";
+	/* RealView Platform Baseboard for Cortex A-8 */
+	compatible = "arm,realview-pba8";
+	/* RealView Platform Baseboard Explore for Cortex A-9 */
+	compatible = "arm,realview-pbx";
+
+Required nodes:
+
+- soc: some node of the RealView platforms must be the SoC
+  node that contain the SoC-specific devices, withe the compatible
+  string set to one of these tuples:
+   "arm,realview-eb-soc", "simple-bus"
+   "arm,realview-pb1176-soc", "simple-bus"
+   "arm,realview-pb11mp-soc", "simple-bus"
+   "arm,realview-pba8-soc", "simple-bus"
+   "arm,realview-pbx-soc", "simple-bus"
+
+- syscon: some subnode of the RealView SoC node must be a
+  system controller node pointing to the control registers,
+  with the compatible string set to one of these tuples:
+   "arm,realview-eb-syscon", "syscon"
+   "arm,realview-pb1176-syscon", "syscon"
+   "arm,realview-pb11mp-syscon", "syscon"
+   "arm,realview-pba8-syscon", "syscon"
+   "arm,realview-pbx-syscon", "syscon"
+
+  Required properties for the system controller:
+  - regs: the location and size of the system controller registers,
+    one range of 0x1000 bytes.
+
+Example:
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
+
+/ {
+	model = "ARM RealView PB1176 with device tree";
+	compatible = "arm,realview-pb1176";
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb1176-soc", "simple-bus";
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-syscon", "syscon";
+			reg = <0x10000000 0x1000>;
+		};
+
+	};
+};
diff --git a/Bindings/arm/armada-38x.txt b/Bindings/arm/armada-38x.txt
index ad9f8ed4d9bd..202953f1887e 100644
--- a/Bindings/arm/armada-38x.txt
+++ b/Bindings/arm/armada-38x.txt
@@ -15,6 +15,13 @@ Required root node property:
 
 compatible: must contain "marvell,armada385"
 
+In addition, boards using the Marvell Armada 388 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada388"
+
 Example:
 
 compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
diff --git a/Bindings/arm/atmel-at91.txt b/Bindings/arm/atmel-at91.txt
index 16f60b41c147..ad319f84f560 100644
--- a/Bindings/arm/atmel-at91.txt
+++ b/Bindings/arm/atmel-at91.txt
@@ -1,6 +1,44 @@
 Atmel AT91 device tree bindings.
 ================================
 
+Boards with a SoC of the Atmel AT91 or SMART family shall have the following
+properties:
+
+Required root node properties:
+compatible: must be one of:
+ * "atmel,at91rm9200"
+
+ * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with
+   the specific SoC family or compatible:
+    o "atmel,at91sam9260"
+    o "atmel,at91sam9261"
+    o "atmel,at91sam9263"
+    o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific
+      SoC compatible:
+       - "atmel,at91sam9g15"
+       - "atmel,at91sam9g25"
+       - "atmel,at91sam9g35"
+       - "atmel,at91sam9x25"
+       - "atmel,at91sam9x35"
+    o "atmel,at91sam9g20"
+    o "atmel,at91sam9g45"
+    o "atmel,at91sam9n12"
+    o "atmel,at91sam9rl"
+    o "atmel,at91sam9xe"
+ * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
+   SoC family:
+    o "atmel,sama5d3" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d31"
+       - "atmel,sama5d33"
+       - "atmel,sama5d34"
+       - "atmel,sama5d35"
+       - "atmel,sama5d36"
+    o "atmel,sama5d4" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d41"
+       - "atmel,sama5d42"
+       - "atmel,sama5d43"
+       - "atmel,sama5d44"
+
 PIT Timer required properties:
 - compatible: Should be "atmel,at91sam9260-pit"
 - reg: Should contain registers location and length
@@ -61,8 +99,8 @@ RAMC SDRAM/DDR Controller required properties:
 - compatible: Should be "atmel,at91rm9200-sdramc",
 			"atmel,at91sam9260-sdramc",
 			"atmel,at91sam9g45-ddramc",
+			"atmel,sama5d3-ddramc",
 - reg: Should contain registers location and length
-  For at91sam9263 and at91sam9g45 you must specify 2 entries.
 
 Examples:
 
@@ -71,12 +109,6 @@ Examples:
 		reg = <0xffffe800 0x200>;
 	};
 
-	ramc0: ramc@ffffe400 {
-		compatible = "atmel,at91sam9g45-ddramc";
-		reg = <0xffffe400 0x200
-		       0xffffe600 0x200>;
-	};
-
 SHDWC Shutdown Controller
 
 required properties:
@@ -105,3 +137,19 @@ Example:
 		compatible = "atmel,at91sam9260-rstc";
 		reg = <0xfffffd00 0x10>;
 	};
+
+Special Function Registers (SFR)
+
+Special Function Registers (SFR) manage specific aspects of the integrated
+memory, bridge implementations, processor and other functionality not controlled
+elsewhere.
+
+required properties:
+- compatible: Should be "atmel,<chip>-sfr", "syscon".
+  <chip> can be "sama5d3" or "sama5d4".
+- reg: Should contain registers location and length
+
+	sfr@f0038000 {
+		compatible = "atmel,sama5d3-sfr", "syscon";
+		reg = <0xf0038000 0x60>;
+	};
diff --git a/Bindings/arm/bcm/bcm63138.txt b/Bindings/arm/bcm/bcm63138.txt
new file mode 100644
index 000000000000..bd49987a8812
--- /dev/null
+++ b/Bindings/arm/bcm/bcm63138.txt
@@ -0,0 +1,9 @@
+Broadcom BCM63138 DSL System-on-a-Chip device tree bindings
+-----------------------------------------------------------
+
+Boards compatible with the BCM63138 DSL System-on-a-Chip should have the
+following properties:
+
+Required root node property:
+
+compatible: should be "brcm,bcm63138"
diff --git a/Bindings/arm/bcm/cygnus.txt b/Bindings/arm/bcm/cygnus.txt
new file mode 100644
index 000000000000..4c77169bb534
--- /dev/null
+++ b/Bindings/arm/bcm/cygnus.txt
@@ -0,0 +1,31 @@
+Broadcom Cygnus device tree bindings
+------------------------------------
+
+
+Boards with Cygnus SoCs shall have the following properties:
+
+Required root node property:
+
+BCM11300
+compatible = "brcm,bcm11300", "brcm,cygnus";
+
+BCM11320
+compatible = "brcm,bcm11320", "brcm,cygnus";
+
+BCM11350
+compatible = "brcm,bcm11350", "brcm,cygnus";
+
+BCM11360
+compatible = "brcm,bcm11360", "brcm,cygnus";
+
+BCM58300
+compatible = "brcm,bcm58300", "brcm,cygnus";
+
+BCM58302
+compatible = "brcm,bcm58302", "brcm,cygnus";
+
+BCM58303
+compatible = "brcm,bcm58303", "brcm,cygnus";
+
+BCM58305
+compatible = "brcm,bcm58305", "brcm,cygnus";
diff --git a/Bindings/arm/brcm-brcmstb.txt b/Bindings/arm/brcm-brcmstb.txt
index 3c436cc4f35d..430608ec09f0 100644
--- a/Bindings/arm/brcm-brcmstb.txt
+++ b/Bindings/arm/brcm-brcmstb.txt
@@ -79,7 +79,9 @@ reboot
 Required properties
 
     - compatible
-        The string property "brcm,brcmstb-reboot".
+        The string property "brcm,brcmstb-reboot" for 40nm/28nm chips with
+        the new SYS_CTRL interface, or "brcm,bcm7038-reboot" for 65nm
+        chips with the old SUN_TOP_CTRL interface.
 
     - syscon
         A phandle / integer array that points to the syscon node which describes
diff --git a/Bindings/arm/cavium-thunder.txt b/Bindings/arm/cavium-thunder.txt
new file mode 100644
index 000000000000..6f63a5866902
--- /dev/null
+++ b/Bindings/arm/cavium-thunder.txt
@@ -0,0 +1,10 @@
+Cavium Thunder platform device tree bindings
+--------------------------------------------
+
+Boards with Cavium's Thunder SoC shall have following properties.
+
+Root Node
+---------
+Required root node properties:
+
+  - compatible = "cavium,thunder-88xx";
diff --git a/Bindings/arm/coresight.txt b/Bindings/arm/coresight.txt
new file mode 100644
index 000000000000..a3089359aaa6
--- /dev/null
+++ b/Bindings/arm/coresight.txt
@@ -0,0 +1,200 @@
+* CoreSight Components:
+
+CoreSight components are compliant with the ARM CoreSight architecture
+specification and can be connected in various topologies to suit a particular
+SoCs tracing needs. These trace components can generally be classified as
+sinks, links and sources. Trace data produced by one or more sources flows
+through the intermediate links connecting the source to the currently selected
+sink. Each CoreSight component device should use these properties to describe
+its hardware characteristcs.
+
+* Required properties for all components *except* non-configurable replicators:
+
+	* compatible: These have to be supplemented with "arm,primecell" as
+	  drivers are using the AMBA bus interface.  Possible values include:
+		- "arm,coresight-etb10", "arm,primecell";
+		- "arm,coresight-tpiu", "arm,primecell";
+		- "arm,coresight-tmc", "arm,primecell";
+		- "arm,coresight-funnel", "arm,primecell";
+		- "arm,coresight-etm3x", "arm,primecell";
+
+	* reg: physical base address and length of the register
+	  set(s) of the component.
+
+	* clocks: the clock associated to this component.
+
+	* clock-names: the name of the clock as referenced by the code.
+	  Since we are using the AMBA framework, the name should be
+	  "apb_pclk".
+
+	* port or ports: The representation of the component's port
+	  layout using the generic DT graph presentation found in
+	  "bindings/graph.txt".
+
+* Required properties for devices that don't show up on the AMBA bus, such as
+  non-configurable replicators:
+
+	* compatible: Currently supported value is (note the absence of the
+	  AMBA markee):
+		- "arm,coresight-replicator"
+
+	* port or ports: same as above.
+
+* Optional properties for ETM/PTMs:
+
+	* arm,cp14: must be present if the system accesses ETM/PTM management
+	  registers via co-processor 14.
+
+	* cpu: the cpu phandle this ETM/PTM is affined to. When omitted the
+	  source is considered to belong to CPU0.
+
+* Optional property for TMC:
+
+	* arm,buffer-size: size of contiguous buffer space for TMC ETR
+	 (embedded trace router)
+
+
+Example:
+
+1. Sinks
+	etb@20010000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		coresight-default-sink;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			etb_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port0>;
+			};
+		};
+	};
+
+	tpiu@20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			tpiu_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+2. Links
+	replicator {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@20040000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel_out_port0: endpoint {
+					remote-endpoint =
+							<&replicator_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+		};
+	};
+
+3. Sources
+	ptm@2201c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201c000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			ptm0_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port0>;
+			};
+		};
+	};
+
+	ptm@2201d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201d000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			ptm1_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port1>;
+			};
+		};
+	};
diff --git a/Bindings/arm/cpus.txt b/Bindings/arm/cpus.txt
index 298e2f6b33c6..8b9e0a95de31 100644
--- a/Bindings/arm/cpus.txt
+++ b/Bindings/arm/cpus.txt
@@ -166,6 +166,7 @@ nodes to be present and contain the properties described below.
 			    "arm,cortex-r5"
 			    "arm,cortex-r7"
 			    "brcm,brahma-b15"
+			    "cavium,thunder"
 			    "faraday,fa526"
 			    "intel,sa110"
 			    "intel,sa1100"
@@ -174,6 +175,7 @@ nodes to be present and contain the properties described below.
 			    "marvell,pj4a"
 			    "marvell,pj4b"
 			    "marvell,sheeva-v5"
+			    "nvidia,tegra132-denver"
 			    "qcom,krait"
 			    "qcom,scorpion"
 	- enable-method
@@ -219,6 +221,21 @@ nodes to be present and contain the properties described below.
 		Value type: <phandle>
 		Definition: Specifies the ACC[2] node associated with this CPU.
 
+	- cpu-idle-states
+		Usage: Optional
+		Value type: <prop-encoded-array>
+		Definition:
+			# List of phandles to idle state nodes supported
+			  by this cpu [3].
+
+	- rockchip,pmu
+		Usage: optional for systems that have an "enable-method"
+		       property value of "rockchip,rk3066-smp"
+		       While optional, it is the preferred way to get access to
+		       the cpu-core power-domains.
+		Value type: <phandle>
+		Definition: Specifies the syscon node controlling the cpu core
+			    power domains.
 
 Example 1 (dual-cluster big.LITTLE system 32-bit):
 
@@ -415,3 +432,5 @@ cpus {
 --
 [1] arm/msm/qcom,saw2.txt
 [2] arm/msm/qcom,kpss-acc.txt
+[3] ARM Linux kernel documentation - idle states bindings
+    Documentation/devicetree/bindings/arm/idle-states.txt
diff --git a/Bindings/arm/digicolor.txt b/Bindings/arm/digicolor.txt
new file mode 100644
index 000000000000..658553f40b23
--- /dev/null
+++ b/Bindings/arm/digicolor.txt
@@ -0,0 +1,6 @@
+Conexant Digicolor Platforms Device Tree Bindings
+
+Each device tree must specify which Conexant Digicolor SoC it uses.
+Must be the following compatible string:
+
+  cnxt,cx92755
diff --git a/Bindings/arm/exynos/power_domain.txt b/Bindings/arm/exynos/power_domain.txt
index 8b4f7b7fe88b..f4445e5a2bbb 100644
--- a/Bindings/arm/exynos/power_domain.txt
+++ b/Bindings/arm/exynos/power_domain.txt
@@ -8,6 +8,8 @@ Required Properties:
     * samsung,exynos4210-pd - for exynos4210 type power domain.
 - reg: physical base address of the controller and length of memory mapped
     region.
+- #power-domain-cells: number of cells in power domain specifier;
+    must be 0.
 
 Optional Properties:
 - clocks: List of clock handles. The parent clocks of the input clocks to the
@@ -21,7 +23,7 @@ Optional Properties:
 		devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
 		are supported currently.
 
-Node of a device using power domains must have a samsung,power-domain property
+Node of a device using power domains must have a power-domains property
 defined with a phandle to respective power domain.
 
 Example:
@@ -29,6 +31,7 @@ Example:
 	lcd0: power-domain-lcd0 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10023C00 0x10>;
+		#power-domain-cells = <0>;
 	};
 
 	mfc_pd: power-domain@10044060 {
@@ -37,12 +40,8 @@ Example:
 		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
 			<&clock CLK_MOUT_USER_ACLK333>;
 		clock-names = "oscclk", "pclk0", "clk0";
+		#power-domain-cells = <0>;
 	};
 
-Example of the node using power domain:
-
-	node {
-		/* ... */
-		samsung,power-domain = <&lcd0>;
-		/* ... */
-	};
+See Documentation/devicetree/bindings/power/power_domain.txt for description
+of consumer-side bindings.
diff --git a/Bindings/arm/fsl.txt b/Bindings/arm/fsl.txt
index e935d7d4ac43..a5462b6b3c30 100644
--- a/Bindings/arm/fsl.txt
+++ b/Bindings/arm/fsl.txt
@@ -74,3 +74,61 @@ Required root node properties:
 i.MX6q generic board
 Required root node properties:
     - compatible = "fsl,imx6q";
+
+Freescale Vybrid Platform Device Tree Bindings
+----------------------------------------------
+
+For the Vybrid SoC familiy all variants with DDR controller are supported,
+which is the VF5xx and VF6xx series. Out of historical reasons, in most
+places the kernel uses vf610 to refer to the whole familiy.
+
+Required root node compatible property (one of them):
+    - compatible = "fsl,vf500";
+    - compatible = "fsl,vf510";
+    - compatible = "fsl,vf600";
+    - compatible = "fsl,vf610";
+
+Freescale LS1021A Platform Device Tree Bindings
+------------------------------------------------
+
+Required root node compatible properties:
+  - compatible = "fsl,ls1021a";
+
+Freescale LS1021A SoC-specific Device Tree Bindings
+-------------------------------------------
+
+Freescale SCFG
+  SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+  Required properties:
+  - compatible: should be "fsl,ls1021a-scfg"
+  - reg: should contain base address and length of SCFG memory-mapped registers
+
+Example:
+	scfg: scfg@1570000 {
+		compatible = "fsl,ls1021a-scfg";
+		reg = <0x0 0x1570000 0x0 0x10000>;
+	};
+
+Freescale DCFG
+  DCFG is the device configuration unit, that provides general purpose
+configuration and status for the device. Such as setting the secondary
+core start address and release the secondary core from holdoff and startup.
+  Required properties:
+  - compatible: should be "fsl,ls1021a-dcfg"
+  - reg : should contain base address and length of DCFG memory-mapped registers
+
+Example:
+	dcfg: dcfg@1ee0000 {
+		compatible = "fsl,ls1021a-dcfg";
+		reg = <0x0 0x1ee0000 0x0 0x10000>;
+	};
+
+Freescale LS2085A SoC Device Tree Bindings
+------------------------------------------
+
+LS2085A ARMv8 based Simulator model
+Required root node properties:
+    - compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+
diff --git a/Bindings/arm/fw-cfg.txt b/Bindings/arm/fw-cfg.txt
new file mode 100644
index 000000000000..953fb640d9c4
--- /dev/null
+++ b/Bindings/arm/fw-cfg.txt
@@ -0,0 +1,72 @@
+* QEMU Firmware Configuration bindings for ARM
+
+QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets
+provide the following Firmware Configuration interface on the "virt" machine
+type:
+
+- A write-only, 16-bit wide selector (or control) register,
+- a read-write, 64-bit wide data register.
+
+QEMU exposes the control and data register to ARM guests as memory mapped
+registers; their location is communicated to the guest's UEFI firmware in the
+DTB that QEMU places at the bottom of the guest's DRAM.
+
+The guest writes a selector value (a key) to the selector register, and then
+can read the corresponding data (produced by QEMU) via the data register. If
+the selected entry is writable, the guest can rewrite it through the data
+register.
+
+The selector register takes keys in big endian byte order.
+
+The data register allows accesses with 8, 16, 32 and 64-bit width (only at
+offset 0 of the register). Accesses larger than a byte are interpreted as
+arrays, bundled together only for better performance. The bytes constituting
+such a word, in increasing address order, correspond to the bytes that would
+have been transferred by byte-wide accesses in chronological order.
+
+The interface allows guest firmware to download various parameters and blobs
+that affect how the firmware works and what tables it installs for the guest
+OS. For example, boot order of devices, ACPI tables, SMBIOS tables, kernel and
+initrd images for direct kernel booting, virtual machine UUID, SMP information,
+virtual NUMA topology, and so on.
+
+The authoritative registry of the valid selector values and their meanings is
+the QEMU source code; the structure of the data blobs corresponding to the
+individual key values is also defined in the QEMU source code.
+
+The presence of the registers can be verified by selecting the "signature" blob
+with key 0x0000, and reading four bytes from the data register. The returned
+signature is "QEMU".
+
+The outermost protocol (involving the write / read sequences of the control and
+data registers) is expected to be versioned, and/or described by feature bits.
+The interface revision / feature bitmap can be retrieved with key 0x0001. The
+blob to be read from the data register has size 4, and it is to be interpreted
+as a uint32_t value in little endian byte order. The current value
+(corresponding to the above outer protocol) is zero.
+
+The guest kernel is not expected to use these registers (although it is
+certainly allowed to); the device tree bindings are documented here because
+this is where device tree bindings reside in general.
+
+Required properties:
+
+- compatible: "qemu,fw-cfg-mmio".
+
+- reg: the MMIO region used by the device.
+  * Bytes 0x0 to 0x7 cover the data register.
+  * Bytes 0x8 to 0x9 cover the selector register.
+  * Further registers may be appended to the region in case of future interface
+    revisions / feature bits.
+
+Example:
+
+/ {
+	#size-cells = <0x2>;
+	#address-cells = <0x2>;
+
+	fw-cfg@9020000 {
+		compatible = "qemu,fw-cfg-mmio";
+		reg = <0x0 0x9020000 0x0 0xa>;
+	};
+};
diff --git a/Bindings/arm/geniatech.txt b/Bindings/arm/geniatech.txt
new file mode 100644
index 000000000000..74ccba40b73b
--- /dev/null
+++ b/Bindings/arm/geniatech.txt
@@ -0,0 +1,5 @@
+Geniatech platforms device tree bindings
+-------------------------------------------
+
+Geniatech ATV1200
+    - compatible = "geniatech,atv1200"
diff --git a/Bindings/arm/gic-v3.txt b/Bindings/arm/gic-v3.txt
index 33cd05e6c125..ddfade40ac59 100644
--- a/Bindings/arm/gic-v3.txt
+++ b/Bindings/arm/gic-v3.txt
@@ -49,11 +49,29 @@ Optional
   occupied by the redistributors. Required if more than one such
   region is present.
 
+Sub-nodes:
+
+GICv3 has one or more Interrupt Translation Services (ITS) that are
+used to route Message Signalled Interrupts (MSI) to the CPUs.
+
+These nodes must have the following properties:
+- compatible : Should at least contain  "arm,gic-v3-its".
+- msi-controller : Boolean property. Identifies the node as an MSI controller
+- reg: Specifies the base physical address and size of the ITS
+  registers.
+
+The main GIC node must contain the appropriate #address-cells,
+#size-cells and ranges properties for the reg property of all ITS
+nodes.
+
 Examples:
 
 	gic: interrupt-controller@2cf00000 {
 		compatible = "arm,gic-v3";
 		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 		interrupt-controller;
 		reg = <0x0 0x2f000000 0 0x10000>,	// GICD
 		      <0x0 0x2f100000 0 0x200000>,	// GICR
@@ -61,11 +79,20 @@ Examples:
 		      <0x0 0x2c010000 0 0x2000>,	// GICH
 		      <0x0 0x2c020000 0 0x2000>;	// GICV
 		interrupts = <1 9 4>;
+
+		gic-its@2c200000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x2c200000 0 0x200000>;
+		};
 	};
 
 	gic: interrupt-controller@2c010000 {
 		compatible = "arm,gic-v3";
 		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 		interrupt-controller;
 		redistributor-stride = <0x0 0x40000>;	// 256kB stride
 		#redistributor-regions = <2>;
@@ -76,4 +103,16 @@ Examples:
 		      <0x0 0x2c060000 0 0x2000>,	// GICH
 		      <0x0 0x2c080000 0 0x2000>;	// GICV
 		interrupts = <1 9 4>;
+
+		gic-its@2c200000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x2c200000 0 0x200000>;
+		};
+
+		gic-its@2c400000 {
+			compatible = "arm,gic-v3-its";
+			msi-controller;
+			reg = <0x0 0x2c400000 0 0x200000>;
+		};
 	};
diff --git a/Bindings/arm/gic.txt b/Bindings/arm/gic.txt
index c7d2fa156678..c97484b73e72 100644
--- a/Bindings/arm/gic.txt
+++ b/Bindings/arm/gic.txt
@@ -17,6 +17,7 @@ Main node required properties:
 	"arm,cortex-a7-gic"
 	"arm,arm11mp-gic"
 	"brcm,brahma-b15-gic"
+	"arm,arm1176jzf-devchip-gic"
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source.  The type shall be a <u32> and the value shall be 3.
@@ -31,12 +32,16 @@ Main node required properties:
   The 3rd cell is the flags, encoded as follows:
 	bits[3:0] trigger type and level flags.
 		1 = low-to-high edge triggered
-		2 = high-to-low edge triggered
+		2 = high-to-low edge triggered (invalid for SPIs)
 		4 = active high level-sensitive
-		8 = active low level-sensitive
+		8 = active low level-sensitive (invalid for SPIs).
 	bits[15:8] PPI interrupt cpu mask.  Each bit corresponds to each of
 	the 8 possible cpus attached to the GIC.  A bit set to '1' indicated
 	the interrupt is wired to that CPU.  Only valid for PPI interrupts.
+	Also note that the configurability of PPI interrupts is IMPLEMENTATION
+	DEFINED and as such not guaranteed to be present (most SoC available
+	in 2014 seem to ignore the setting of this flag and use the hardware
+	default value).
 
 - reg : Specifies base physical address(s) and size of the GIC registers. The
   first region is the GIC distributor register base and size. The 2nd region is
@@ -96,3 +101,56 @@ Example:
 		      <0x2c006000 0x2000>;
 		interrupts = <1 9 0xf04>;
 	};
+
+
+* GICv2m extension for MSI/MSI-x support (Optional)
+
+Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s).
+This is enabled by specifying v2m sub-node(s).
+
+Required properties:
+
+- compatible	    : The value here should contain "arm,gic-v2m-frame".
+
+- msi-controller    : Identifies the node as an MSI controller.
+
+- reg		    : GICv2m MSI interface register base and size
+
+Optional properties:
+
+- arm,msi-base-spi  : When the MSI_TYPER register contains an incorrect
+  		      value, this property should contain the SPI base of
+		      the MSI frame, overriding the HW value.
+
+- arm,msi-num-spis  : When the MSI_TYPER register contains an incorrect
+  		      value, this property should contain the number of
+		      SPIs assigned to the frame, overriding the HW value.
+
+Example:
+
+	interrupt-controller@e1101000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-controller;
+		interrupts = <1 8 0xf04>;
+		ranges = <0 0 0 0xe1100000 0 0x100000>;
+		reg = <0x0 0xe1110000 0 0x01000>,
+		      <0x0 0xe112f000 0 0x02000>,
+		      <0x0 0xe1140000 0 0x10000>,
+		      <0x0 0xe1160000 0 0x10000>;
+		v2m0: v2m@0x8000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x80000 0 0x1000>;
+		};
+
+		....
+
+		v2mN: v2m@0x9000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x90000 0 0x1000>;
+		};
+	};
diff --git a/Bindings/arm/hisilicon/hisilicon.txt b/Bindings/arm/hisilicon/hisilicon.txt
index 934f00025cc4..35b1bd49cfa1 100644
--- a/Bindings/arm/hisilicon/hisilicon.txt
+++ b/Bindings/arm/hisilicon/hisilicon.txt
@@ -5,6 +5,15 @@ Hi4511 Board
 Required root node properties:
 	- compatible = "hisilicon,hi3620-hi4511";
 
+HiP04 D01 Board
+Required root node properties:
+	- compatible = "hisilicon,hip04-d01";
+
+HiP01 ca9x2 Board
+Required root node properties:
+	- compatible = "hisilicon,hip01-ca9x2";
+
+
 Hisilicon system controller
 
 Required properties:
@@ -32,6 +41,27 @@ Example:
 	};
 
 -----------------------------------------------------------------------
+Hisilicon HiP01 system controller
+
+Required properties:
+- compatible : "hisilicon,hip01-sysctrl"
+- reg : Register address and size
+
+The HiP01 system controller is mostly compatible with hisilicon
+system controller,but it has some specific control registers for
+HIP01 SoC family, such as slave core boot, and also some same
+registers located at different offset.
+
+Example:
+
+	/* for hip01-ca9x2 */
+	sysctrl: system-controller@10000000 {
+		compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+		reg = <0x10000000 0x1000>;
+		reboot-offset = <0x4>;
+	};
+
+-----------------------------------------------------------------------
 Hisilicon CPU controller
 
 Required properties:
@@ -55,3 +85,21 @@ Example:
 		compatible = "hisilicon,pctrl";
 		reg = <0xfca09000 0x1000>;
 	};
+
+-----------------------------------------------------------------------
+Fabric:
+
+Required Properties:
+- compatible: "hisilicon,hip04-fabric";
+- reg: Address and size of Fabric
+
+-----------------------------------------------------------------------
+Bootwrapper boot method (software protocol on SMP):
+
+Required Properties:
+- compatible: "hisilicon,hip04-bootwrapper";
+- boot-method: Address and size of boot method.
+  [0]: bootwrapper physical address
+  [1]: bootwrapper size
+  [2]: relocation physical address
+  [3]: relocation size
diff --git a/Bindings/arm/idle-states.txt b/Bindings/arm/idle-states.txt
new file mode 100644
index 000000000000..a8274eabae2e
--- /dev/null
+++ b/Bindings/arm/idle-states.txt
@@ -0,0 +1,699 @@
+==========================================
+ARM idle states binding description
+==========================================
+
+==========================================
+1 - Introduction
+==========================================
+
+ARM systems contain HW capable of managing power consumption dynamically,
+where cores can be put in different low-power states (ranging from simple
+wfi to power gating) according to OS PM policies. The CPU states representing
+the range of dynamic idle states that a processor can enter at run-time, can be
+specified through device tree bindings representing the parameters required
+to enter/exit specific idle states on a given processor.
+
+According to the Server Base System Architecture document (SBSA, [3]), the
+power states an ARM CPU can be put into are identified by the following list:
+
+- Running
+- Idle_standby
+- Idle_retention
+- Sleep
+- Off
+
+The power states described in the SBSA document define the basic CPU states on
+top of which ARM platforms implement power management schemes that allow an OS
+PM implementation to put the processor in different idle states (which include
+states listed above; "off" state is not an idle state since it does not have
+wake-up capabilities, hence it is not considered in this document).
+
+Idle state parameters (eg entry latency) are platform specific and need to be
+characterized with bindings that provide the required information to OS PM
+code so that it can build the required tables and use them at runtime.
+
+The device tree binding definition for ARM idle states is the subject of this
+document.
+
+===========================================
+2 - idle-states definitions
+===========================================
+
+Idle states are characterized for a specific system through a set of
+timing and energy related properties, that underline the HW behaviour
+triggered upon idle states entry and exit.
+
+The following diagram depicts the CPU execution phases and related timing
+properties required to enter and exit an idle state:
+
+..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__..
+	    |          |           |          |          |
+
+	    |<------ entry ------->|
+	    |       latency        |
+					      |<- exit ->|
+					      |  latency |
+	    |<-------- min-residency -------->|
+		       |<-------  wakeup-latency ------->|
+
+		Diagram 1: CPU idle state execution phases
+
+EXEC:	Normal CPU execution.
+
+PREP:	Preparation phase before committing the hardware to idle mode
+	like cache flushing. This is abortable on pending wake-up
+	event conditions. The abort latency is assumed to be negligible
+	(i.e. less than the ENTRY + EXIT duration). If aborted, CPU
+	goes back to EXEC. This phase is optional. If not abortable,
+	this should be included in the ENTRY phase instead.
+
+ENTRY:	The hardware is committed to idle mode. This period must run
+	to completion up to IDLE before anything else can happen.
+
+IDLE:	This is the actual energy-saving idle period. This may last
+	between 0 and infinite time, until a wake-up event occurs.
+
+EXIT:	Period during which the CPU is brought back to operational
+	mode (EXEC).
+
+entry-latency: Worst case latency required to enter the idle state. The
+exit-latency may be guaranteed only after entry-latency has passed.
+
+min-residency: Minimum period, including preparation and entry, for a given
+idle state to be worthwhile energywise.
+
+wakeup-latency: Maximum delay between the signaling of a wake-up event and the
+CPU being able to execute normal code again. If not specified, this is assumed
+to be entry-latency + exit-latency.
+
+These timing parameters can be used by an OS in different circumstances.
+
+An idle CPU requires the expected min-residency time to select the most
+appropriate idle state based on the expected expiry time of the next IRQ
+(ie wake-up) that causes the CPU to return to the EXEC phase.
+
+An operating system scheduler may need to compute the shortest wake-up delay
+for CPUs in the system by detecting how long will it take to get a CPU out
+of an idle state, eg:
+
+wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0)
+
+In other words, the scheduler can make its scheduling decision by selecting
+(eg waking-up) the CPU with the shortest wake-up latency.
+The wake-up latency must take into account the entry latency if that period
+has not expired. The abortable nature of the PREP period can be ignored
+if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than
+the worst case since it depends on the CPU operating conditions, ie caches
+state).
+
+An OS has to reliably probe the wakeup-latency since some devices can enforce
+latency constraints guarantees to work properly, so the OS has to detect the
+worst case wake-up latency it can incur if a CPU is allowed to enter an
+idle state, and possibly to prevent that to guarantee reliable device
+functioning.
+
+The min-residency time parameter deserves further explanation since it is
+expressed in time units but must factor in energy consumption coefficients.
+
+The energy consumption of a cpu when it enters a power state can be roughly
+characterised by the following graph:
+
+               |
+               |
+               |
+           e   |
+           n   |                                      /---
+           e   |                               /------
+           r   |                        /------
+           g   |                  /-----
+           y   |           /------
+               |       ----
+               |      /|
+               |     / |
+               |    /  |
+               |   /   |
+               |  /    |
+               | /     |
+               |/      |
+          -----|-------+----------------------------------
+              0|       1                              time(ms)
+
+		Graph 1: Energy vs time example
+
+The graph is split in two parts delimited by time 1ms on the X-axis.
+The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope
+and denotes the energy costs incurred whilst entering and leaving the idle
+state.
+The graph curve in the area delimited by X-axis values = {x | x > 1ms } has
+shallower slope and essentially represents the energy consumption of the idle
+state.
+
+min-residency is defined for a given idle state as the minimum expected
+residency time for a state (inclusive of preparation and entry) after
+which choosing that state become the most energy efficient option. A good
+way to visualise this, is by taking the same graph above and comparing some
+states energy consumptions plots.
+
+For sake of simplicity, let's consider a system with two idle states IDLE1,
+and IDLE2:
+
+          |
+          |
+          |
+          |                                                  /-- IDLE1
+       e  |                                              /---
+       n  |                                         /----
+       e  |                                     /---
+       r  |                                /-----/--------- IDLE2
+       g  |                    /-------/---------
+       y  |        ------------    /---|
+          |       /           /----    |
+          |      /        /---         |
+          |     /    /----             |
+          |    / /---                  |
+          |   ---                      |
+          |  /                         |
+          | /                          |
+          |/                           |                  time
+       ---/----------------------------+------------------------
+          |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy
+                                       |
+                                IDLE2-min-residency
+
+		Graph 2: idle states min-residency example
+
+In graph 2 above, that takes into account idle states entry/exit energy
+costs, it is clear that if the idle state residency time (ie time till next
+wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state
+choice energywise.
+
+This is mainly down to the fact that IDLE1 entry/exit energy costs are lower
+than IDLE2.
+
+However, the lower power consumption (ie shallower energy curve slope) of idle
+state IDLE2 implies that after a suitable time, IDLE2 becomes more energy
+efficient.
+
+The time at which IDLE2 becomes more energy efficient than IDLE1 (and other
+shallower states in a system with multiple idle states) is defined
+IDLE2-min-residency and corresponds to the time when energy consumption of
+IDLE1 and IDLE2 states breaks even.
+
+The definitions provided in this section underpin the idle states
+properties specification that is the subject of the following sections.
+
+===========================================
+3 - idle-states node
+===========================================
+
+ARM processor idle states are defined within the idle-states node, which is
+a direct child of the cpus node [1] and provides a container where the
+processor idle states, defined as device tree nodes, are listed.
+
+- idle-states node
+
+	Usage: Optional - On ARM systems, it is a container of processor idle
+			  states nodes. If the system does not provide CPU
+			  power management capabilities or the processor just
+			  supports idle_standby an idle-states node is not
+			  required.
+
+	Description: idle-states node is a container node, where its
+		     subnodes describe the CPU idle states.
+
+	Node name must be "idle-states".
+
+	The idle-states node's parent node must be the cpus node.
+
+	The idle-states node's child nodes can be:
+
+	- one or more state nodes
+
+	Any other configuration is considered invalid.
+
+	An idle-states node defines the following properties:
+
+	- entry-method
+		Value type: <stringlist>
+		Usage and definition depend on ARM architecture version.
+			# On ARM v8 64-bit this property is required and must
+			  be one of:
+			   - "psci" (see bindings in [2])
+			# On ARM 32-bit systems this property is optional
+
+The nodes describing the idle states (state) can only be defined within the
+idle-states node, any other configuration is considered invalid and therefore
+must be ignored.
+
+===========================================
+4 - state node
+===========================================
+
+A state node represents an idle state description and must be defined as
+follows:
+
+- state node
+
+	Description: must be child of the idle-states node
+
+	The state node name shall follow standard device tree naming
+	rules ([5], 2.2.1 "Node names"), in particular state nodes which
+	are siblings within a single common parent must be given a unique name.
+
+	The idle state entered by executing the wfi instruction (idle_standby
+	SBSA,[3][4]) is considered standard on all ARM platforms and therefore
+	must not be listed.
+
+	With the definitions provided above, the following list represents
+	the valid properties for a state node:
+
+	- compatible
+		Usage: Required
+		Value type: <stringlist>
+		Definition: Must be "arm,idle-state".
+
+	- local-timer-stop
+		Usage: See definition
+		Value type: <none>
+		Definition: if present the CPU local timer control logic is
+			    lost on state entry, otherwise it is retained.
+
+	- entry-latency-us
+		Usage: Required
+		Value type: <prop-encoded-array>
+		Definition: u32 value representing worst case latency in
+			    microseconds required to enter the idle state.
+			    The exit-latency-us duration may be guaranteed
+			    only after entry-latency-us has passed.
+
+	- exit-latency-us
+		Usage: Required
+		Value type: <prop-encoded-array>
+		Definition: u32 value representing worst case latency
+			    in microseconds required to exit the idle state.
+
+	- min-residency-us
+		Usage: Required
+		Value type: <prop-encoded-array>
+		Definition: u32 value representing minimum residency duration
+			    in microseconds, inclusive of preparation and
+			    entry, for this idle state to be considered
+			    worthwhile energy wise (refer to section 2 of
+			    this document for a complete description).
+
+	- wakeup-latency-us:
+		Usage: Optional
+		Value type: <prop-encoded-array>
+		Definition: u32 value representing maximum delay between the
+			    signaling of a wake-up event and the CPU being
+			    able to execute normal code again. If omitted,
+			    this is assumed to be equal to:
+
+				entry-latency-us + exit-latency-us
+
+			    It is important to supply this value on systems
+			    where the duration of PREP phase (see diagram 1,
+			    section 2) is non-neglibigle.
+			    In such systems entry-latency-us + exit-latency-us
+			    will exceed wakeup-latency-us by this duration.
+
+	- status:
+		Usage: Optional
+		Value type: <string>
+		Definition: A standard device tree property [5] that indicates
+			    the operational status of an idle-state.
+			    If present, it shall be:
+			    "okay": to indicate that the idle state is
+				    operational.
+			    "disabled": to indicate that the idle state has
+					been disabled in firmware so it is not
+					operational.
+			    If the property is not present the idle-state must
+			    be considered operational.
+
+	- idle-state-name:
+		Usage: Optional
+		Value type: <string>
+		Definition: A string used as a descriptive name for the idle
+			    state.
+
+	In addition to the properties listed above, a state node may require
+	additional properties specifics to the entry-method defined in the
+	idle-states node, please refer to the entry-method bindings
+	documentation for properties definitions.
+
+===========================================
+4 - Examples
+===========================================
+
+Example 1 (ARM 64-bit, 16-cpu system, PSCI enable-method):
+
+cpus {
+	#size-cells = <0>;
+	#address-cells = <2>;
+
+	CPU0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x0>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x1>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU4: cpu@10000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU5: cpu@10001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU6: cpu@10100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU7: cpu@10101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x0 0x10101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
+				   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU8: cpu@100000000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x1 0x0>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+	};
+
+	CPU9: cpu@100000001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x1 0x1>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+	};
+
+	CPU10: cpu@100000100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x1 0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+	};
+
+	CPU11: cpu@100000101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x1 0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+	};
+
+	CPU12: cpu@100010000 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x1 0x10000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+	};
+
+	CPU13: cpu@100010001 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x1 0x10001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+	};
+
+	CPU14: cpu@100010100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x1 0x10100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+	};
+
+	CPU15: cpu@100010101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x1 0x10101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
+				   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
+	};
+
+	idle-states {
+		entry-method = "arm,psci";
+
+		CPU_RETENTION_0_0: cpu-retention-0-0 {
+			compatible = "arm,idle-state";
+			arm,psci-suspend-param = <0x0010000>;
+			entry-latency-us = <20>;
+			exit-latency-us = <40>;
+			min-residency-us = <80>;
+		};
+
+		CLUSTER_RETENTION_0: cluster-retention-0 {
+			compatible = "arm,idle-state";
+			local-timer-stop;
+			arm,psci-suspend-param = <0x1010000>;
+			entry-latency-us = <50>;
+			exit-latency-us = <100>;
+			min-residency-us = <250>;
+			wakeup-latency-us = <130>;
+		};
+
+		CPU_SLEEP_0_0: cpu-sleep-0-0 {
+			compatible = "arm,idle-state";
+			local-timer-stop;
+			arm,psci-suspend-param = <0x0010000>;
+			entry-latency-us = <250>;
+			exit-latency-us = <500>;
+			min-residency-us = <950>;
+		};
+
+		CLUSTER_SLEEP_0: cluster-sleep-0 {
+			compatible = "arm,idle-state";
+			local-timer-stop;
+			arm,psci-suspend-param = <0x1010000>;
+			entry-latency-us = <600>;
+			exit-latency-us = <1100>;
+			min-residency-us = <2700>;
+			wakeup-latency-us = <1500>;
+		};
+
+		CPU_RETENTION_1_0: cpu-retention-1-0 {
+			compatible = "arm,idle-state";
+			arm,psci-suspend-param = <0x0010000>;
+			entry-latency-us = <20>;
+			exit-latency-us = <40>;
+			min-residency-us = <90>;
+		};
+
+		CLUSTER_RETENTION_1: cluster-retention-1 {
+			compatible = "arm,idle-state";
+			local-timer-stop;
+			arm,psci-suspend-param = <0x1010000>;
+			entry-latency-us = <50>;
+			exit-latency-us = <100>;
+			min-residency-us = <270>;
+			wakeup-latency-us = <100>;
+		};
+
+		CPU_SLEEP_1_0: cpu-sleep-1-0 {
+			compatible = "arm,idle-state";
+			local-timer-stop;
+			arm,psci-suspend-param = <0x0010000>;
+			entry-latency-us = <70>;
+			exit-latency-us = <100>;
+			min-residency-us = <300>;
+			wakeup-latency-us = <150>;
+		};
+
+		CLUSTER_SLEEP_1: cluster-sleep-1 {
+			compatible = "arm,idle-state";
+			local-timer-stop;
+			arm,psci-suspend-param = <0x1010000>;
+			entry-latency-us = <500>;
+			exit-latency-us = <1200>;
+			min-residency-us = <3500>;
+			wakeup-latency-us = <1300>;
+		};
+	};
+
+};
+
+Example 2 (ARM 32-bit, 8-cpu system, two clusters):
+
+cpus {
+	#size-cells = <0>;
+	#address-cells = <1>;
+
+	CPU0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x0>;
+		cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x1>;
+		cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU2: cpu@2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x2>;
+		cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU3: cpu@3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a15";
+		reg = <0x3>;
+		cpu-idle-states = <&CPU_SLEEP_0_0 &CLUSTER_SLEEP_0>;
+	};
+
+	CPU4: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x100>;
+		cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
+	};
+
+	CPU5: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x101>;
+		cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
+	};
+
+	CPU6: cpu@102 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x102>;
+		cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
+	};
+
+	CPU7: cpu@103 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x103>;
+		cpu-idle-states = <&CPU_SLEEP_1_0 &CLUSTER_SLEEP_1>;
+	};
+
+	idle-states {
+		CPU_SLEEP_0_0: cpu-sleep-0-0 {
+			compatible = "arm,idle-state";
+			local-timer-stop;
+			entry-latency-us = <200>;
+			exit-latency-us = <100>;
+			min-residency-us = <400>;
+			wakeup-latency-us = <250>;
+		};
+
+		CLUSTER_SLEEP_0: cluster-sleep-0 {
+			compatible = "arm,idle-state";
+			local-timer-stop;
+			entry-latency-us = <500>;
+			exit-latency-us = <1500>;
+			min-residency-us = <2500>;
+			wakeup-latency-us = <1700>;
+		};
+
+		CPU_SLEEP_1_0: cpu-sleep-1-0 {
+			compatible = "arm,idle-state";
+			local-timer-stop;
+			entry-latency-us = <300>;
+			exit-latency-us = <500>;
+			min-residency-us = <900>;
+			wakeup-latency-us = <600>;
+		};
+
+		CLUSTER_SLEEP_1: cluster-sleep-1 {
+			compatible = "arm,idle-state";
+			local-timer-stop;
+			entry-latency-us = <800>;
+			exit-latency-us = <2000>;
+			min-residency-us = <6500>;
+			wakeup-latency-us = <2300>;
+		};
+	};
+
+};
+
+===========================================
+5 - References
+===========================================
+
+[1] ARM Linux Kernel documentation - CPUs bindings
+    Documentation/devicetree/bindings/arm/cpus.txt
+
+[2] ARM Linux Kernel documentation - PSCI bindings
+    Documentation/devicetree/bindings/arm/psci.txt
+
+[3] ARM Server Base System Architecture (SBSA)
+    http://infocenter.arm.com/help/index.jsp
+
+[4] ARM Architecture Reference Manuals
+    http://infocenter.arm.com/help/index.jsp
+
+[5] ePAPR standard
+    https://www.power.org/documentation/epapr-version-1-1/
diff --git a/Bindings/arm/l2cc.txt b/Bindings/arm/l2cc.txt
index af527ee111c2..0dbabe9a6b0a 100644
--- a/Bindings/arm/l2cc.txt
+++ b/Bindings/arm/l2cc.txt
@@ -2,6 +2,10 @@
 
 ARM cores often have a separate level 2 cache controller. There are various
 implementations of the L2 cache controller with compatible programming models.
+Some of the properties that are just prefixed "cache-*" are taken from section
+3.7.3 of the ePAPR v1.1 specification which can be found at:
+https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf
+
 The ARM L2 cache representation in the device tree should be done as follows:
 
 Required properties:
@@ -44,9 +48,25 @@ Optional properties:
   I/O coherent mode. Valid only when the arm,pl310-cache compatible
   string is used.
 - interrupts : 1 combined interrupt.
+- cache-size : specifies the size in bytes of the cache
+- cache-sets : specifies the number of associativity sets of the cache
+- cache-block-size : specifies the size in bytes of a cache block
+- cache-line-size : specifies the size in bytes of a line in the cache,
+  if this is not specified, the line size is assumed to be equal to the
+  cache block size
 - cache-id-part: cache id part number to be used if it is not present
   on hardware
 - wt-override: If present then L2 is forced to Write through mode
+- arm,double-linefill : Override double linefill enable setting. Enable if
+  non-zero, disable if zero.
+- arm,double-linefill-incr : Override double linefill on INCR read. Enable
+  if non-zero, disable if zero.
+- arm,double-linefill-wrap : Override double linefill on WRAP read. Enable
+  if non-zero, disable if zero.
+- arm,prefetch-drop : Override prefetch drop enable setting. Enable if non-zero,
+  disable if zero.
+- arm,prefetch-offset : Override prefetch offset value. Valid values are
+  0-7, 15, 23, and 31.
 
 Example:
 
diff --git a/Bindings/arm/marvell,berlin.txt b/Bindings/arm/marvell,berlin.txt
index 904de5781f44..a99eb9eb14c0 100644
--- a/Bindings/arm/marvell,berlin.txt
+++ b/Bindings/arm/marvell,berlin.txt
@@ -106,11 +106,21 @@ Required subnode-properties:
 - groups: a list of strings describing the group names.
 - function: a string describing the function used to mux the groups.
 
+* Reset controller binding
+
+A reset controller is part of the chip control registers set. The chip control
+node also provides the reset. The register set is not at the same offset between
+Berlin SoCs.
+
+Required property:
+- #reset-cells: must be set to 2
+
 Example:
 
 chip: chip-control@ea0000 {
 	compatible = "marvell,berlin2-chip-ctrl";
 	#clock-cells = <1>;
+	#reset-cells = <2>;
 	reg = <0xea0000 0x400>;
 	clocks = <&refclk>, <&externaldev 0>;
 	clock-names = "refclk", "video_ext0";
diff --git a/Bindings/arm/mediatek.txt b/Bindings/arm/mediatek.txt
index d6ac71f37314..dd7550a29db6 100644
--- a/Bindings/arm/mediatek.txt
+++ b/Bindings/arm/mediatek.txt
@@ -1,8 +1,31 @@
-Mediatek MT6589 Platforms Device Tree Bindings
+MediaTek mt65xx & mt81xx Platforms Device Tree Bindings
 
-Boards with a SoC of the Mediatek MT6589 shall have the following property:
+Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property:
 
 Required root node property:
 
-compatible: must contain "mediatek,mt6589"
+compatible: Must contain one of
+   "mediatek,mt6589"
+   "mediatek,mt6592"
+   "mediatek,mt8127"
+   "mediatek,mt8135"
+   "mediatek,mt8173"
 
+
+Supported boards:
+
+- bq Aquaris5 smart phone:
+    Required root node properties:
+      - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
+- Evaluation board for MT6592:
+    Required root node properties:
+      - compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+- MTK mt8127 tablet moose EVB:
+    Required root node properties:
+      - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
+- MTK mt8135 tablet EVB:
+    Required root node properties:
+      - compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
+- MTK mt8173 tablet EVB:
+    Required root node properties:
+      - compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
diff --git a/Bindings/arm/mediatek/mediatek,sysirq.txt b/Bindings/arm/mediatek/mediatek,sysirq.txt
new file mode 100644
index 000000000000..4f5a5352ccd8
--- /dev/null
+++ b/Bindings/arm/mediatek/mediatek,sysirq.txt
@@ -0,0 +1,30 @@
+Mediatek 65xx/81xx sysirq
+
+Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI
+interrupt.
+
+Required properties:
+- compatible: should be one of:
+	"mediatek,mt8173-sysirq"
+	"mediatek,mt8135-sysirq"
+	"mediatek,mt8127-sysirq"
+	"mediatek,mt6592-sysirq"
+	"mediatek,mt6589-sysirq"
+	"mediatek,mt6582-sysirq"
+	"mediatek,mt6577-sysirq"
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Use the same format as specified by GIC in
+  Documentation/devicetree/bindings/arm/gic.txt
+- interrupt-parent: phandle of irq parent for sysirq. The parent must
+  use the same interrupt-cells format as GIC.
+- reg: Physical base address of the intpol registers and length of memory
+  mapped region.
+
+Example:
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0 0x10200100 0 0x1c>;
+	};
diff --git a/Bindings/arm/msm/timer.txt b/Bindings/arm/msm/timer.txt
index c6ef8f13dc7e..74607b6c1117 100644
--- a/Bindings/arm/msm/timer.txt
+++ b/Bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
                "qcom,kpss-timer" - krait subsystem
                "qcom,scss-timer" - scorpion subsystem
 
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
                timer, and optionally a second general purpose timer in that
                order.
 
diff --git a/Bindings/arm/omap/mpu.txt b/Bindings/arm/omap/mpu.txt
index 83f405bde138..763695db2bd9 100644
--- a/Bindings/arm/omap/mpu.txt
+++ b/Bindings/arm/omap/mpu.txt
@@ -10,6 +10,9 @@ Required properties:
 	       Should be "ti,omap5-mpu" for OMAP5
 - ti,hwmods: "mpu"
 
+Optional properties:
+- sram:	Phandle to the ocmcram node
+
 Examples:
 
 - For an OMAP5 SMP system:
diff --git a/Bindings/arm/omap/omap.txt b/Bindings/arm/omap/omap.txt
index 0edc90305dfe..4f6a82cef1d1 100644
--- a/Bindings/arm/omap/omap.txt
+++ b/Bindings/arm/omap/omap.txt
@@ -85,6 +85,18 @@ SoCs:
 - DRA722
   compatible = "ti,dra722", "ti,dra72", "ti,dra7"
 
+- AM5728
+  compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM5726
+  compatible = "ti,am5726", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM5718
+  compatible = "ti,am5718", "ti,dra722", "ti,dra72", "ti,dra7"
+
+- AM5716
+  compatible = "ti,am5716", "ti,dra722", "ti,dra72", "ti,dra7"
+
 - AM4372
   compatible = "ti,am4372", "ti,am43"
 
@@ -120,6 +132,9 @@ Boards:
 - AM335X Bone : Low cost community board
   compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
 
+- AM335X OrionLXm : Substation Automation Platform
+  compatible = "novatech,am335x-lxm", "ti,am33xx"
+
 - OMAP5 EVM : Evaluation Module
   compatible = "ti,omap5-evm", "ti,omap5"
 
diff --git a/Bindings/arm/psci.txt b/Bindings/arm/psci.txt
index b4a58f39223c..5aa40ede0e99 100644
--- a/Bindings/arm/psci.txt
+++ b/Bindings/arm/psci.txt
@@ -50,6 +50,16 @@ Main node optional properties:
 
  - migrate       : Function ID for MIGRATE operation
 
+Device tree nodes that require usage of PSCI CPU_SUSPEND function (ie idle
+state nodes, as per bindings in [1]) must specify the following properties:
+
+- arm,psci-suspend-param
+		Usage: Required for state nodes[1] if the corresponding
+                       idle-states node entry-method property is set
+                       to "psci".
+		Value type: <u32>
+		Definition: power_state parameter to pass to the PSCI
+			    suspend call.
 
 Example:
 
@@ -64,7 +74,6 @@ Case 1: PSCI v0.1 only.
 		migrate		= <0x95c10003>;
 	};
 
-
 Case 2: PSCI v0.2 only
 
 	psci {
@@ -88,3 +97,6 @@ Case 3: PSCI v0.2 and PSCI v0.1.
 
 		...
 	};
+
+[1] Kernel documentation - ARM idle states bindings
+    Documentation/devicetree/bindings/arm/idle-states.txt
diff --git a/Bindings/arm/rockchip.txt b/Bindings/arm/rockchip.txt
index 857f12636eb2..6809e4e51ed2 100644
--- a/Bindings/arm/rockchip.txt
+++ b/Bindings/arm/rockchip.txt
@@ -1,10 +1,24 @@
 Rockchip platforms device tree bindings
 ---------------------------------------
 
+- MarsBoard RK3066 board:
+    Required root node properties:
+      - compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
+
 - bq Curie 2 tablet:
     Required root node properties:
       - compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
 
+- ChipSPARK Rayeager PX2 board:
+    Required root node properties:
+      - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
+
 - Radxa Rock board:
     Required root node properties:
       - compatible = "radxa,rock", "rockchip,rk3188";
+
+- Firefly Firefly-RK3288 board:
+    Required root node properties:
+      - compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
+    or
+      - compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288";
diff --git a/Bindings/arm/rockchip/pmu-sram.txt b/Bindings/arm/rockchip/pmu-sram.txt
new file mode 100644
index 000000000000..6b42fda306ff
--- /dev/null
+++ b/Bindings/arm/rockchip/pmu-sram.txt
@@ -0,0 +1,16 @@
+Rockchip SRAM for pmu:
+------------------------------
+
+The sram of pmu is used to store the function of resume from maskrom(the 1st
+level loader). This is a common use of the "pmu-sram" because it keeps power
+even in low power states in the system.
+
+Required node properties:
+- compatible : should be "rockchip,rk3288-pmu-sram"
+- reg : physical base address and the size of the registers window
+
+Example:
+	sram@ff720000 {
+		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+		reg = <0xff720000 0x1000>;
+	};
diff --git a/Bindings/arm/samsung-boards.txt b/Bindings/arm/samsung-boards.txt
index 2168ed31e1b0..43589d2466a7 100644
--- a/Bindings/arm/samsung-boards.txt
+++ b/Bindings/arm/samsung-boards.txt
@@ -1,11 +1,20 @@
-* Samsung's Exynos4210 based SMDKV310 evaluation board
-
-SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC.
+* Samsung's Exynos SoC based boards
 
 Required root node properties:
     - compatible = should be one or more of the following.
-        (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
-        (b) "samsung,exynos4210"  - for boards based on Exynos4210 SoC.
+	- "samsung,monk"	- for Exynos3250-based Samsung Simband board.
+	- "samsung,rinato"	- for Exynos3250-based Samsung Gear2 board.
+	- "samsung,smdkv310"	- for Exynos4210-based Samsung SMDKV310 eval board.
+	- "samsung,trats"	- for Exynos4210-based Tizen Reference board.
+	- "samsung,universal_c210" - for Exynos4210-based Samsung board.
+	- "samsung,smdk4412",	- for Exynos4412-based Samsung SMDK4412 eval board.
+	- "samsung,trats2"	- for Exynos4412-based Tizen Reference board.
+	- "samsung,smdk5250"	- for Exynos5250-based Samsung SMDK5250 eval board.
+	- "samsung,xyref5260"	- for Exynos5260-based Samsung board.
+	- "samsung,smdk5410"	- for Exynos5410-based Samsung SMDK5410 eval board.
+	- "samsung,smdk5420"	- for Exynos5420-based Samsung SMDK5420 eval board.
+	- "samsung,sd5v1"	- for Exynos5440-based Samsung board.
+	- "samsung,ssdk5440"	- for Exynos5440-based Samsung board.
 
 Optional:
     - firmware node, specifying presence and type of secure firmware:
diff --git a/Bindings/arm/samsung/exynos-adc.txt b/Bindings/arm/samsung/exynos-adc.txt
index adc61b095bd1..f46ca9a316a2 100644
--- a/Bindings/arm/samsung/exynos-adc.txt
+++ b/Bindings/arm/samsung/exynos-adc.txt
@@ -11,13 +11,27 @@ New driver handles the following
 
 Required properties:
 - compatible:		Must be "samsung,exynos-adc-v1"
-				for exynos4412/5250 controllers.
+				for exynos4412/5250 and s5pv210 controllers.
 			Must be "samsung,exynos-adc-v2" for
 				future controllers.
 			Must be "samsung,exynos3250-adc" for
 				controllers compatible with ADC of Exynos3250.
-- reg:			Contains ADC register address range (base address and
-			length) and the address of the phy enable register.
+			Must be "samsung,exynos7-adc" for
+				the ADC in Exynos7 and compatibles
+			Must be "samsung,s3c2410-adc" for
+				the ADC in s3c2410 and compatibles
+			Must be "samsung,s3c2416-adc" for
+				the ADC in s3c2416 and compatibles
+			Must be "samsung,s3c2440-adc" for
+				the ADC in s3c2440 and compatibles
+			Must be "samsung,s3c2443-adc" for
+				the ADC in s3c2443 and compatibles
+			Must be "samsung,s3c6410-adc" for
+				the ADC in s3c6410 and compatibles
+- reg:			List of ADC register address range
+			- The base address and range of ADC register
+			- The base address and range of ADC_PHY register (every
+			  SoC except for s3c24xx/s3c64xx ADC)
 - interrupts: 		Contains the interrupt information for the timer. The
 			format is being dependent on which interrupt controller
 			the Samsung device uses.
@@ -31,13 +45,16 @@ Required properties:
 				   compatible ADC block)
 - vdd-supply		VDD input supply.
 
+- samsung,syscon-phandle Contains the PMU system controller node
+			(To access the ADC_PHY register on Exynos5250/5420/5800/3250)
+
 Note: child nodes can be added for auto probing from device tree.
 
 Example: adding device info in dtsi file
 
 adc: adc@12D10000 {
 	compatible = "samsung,exynos-adc-v1";
-	reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+	reg = <0x12D10000 0x100>;
 	interrupts = <0 106 0>;
 	#io-channel-cells = <1>;
 	io-channel-ranges;
@@ -46,13 +63,14 @@ adc: adc@12D10000 {
 	clock-names = "adc";
 
 	vdd-supply = <&buck5_reg>;
+	samsung,syscon-phandle = <&pmu_system_controller>;
 };
 
 Example: adding device info in dtsi file for Exynos3250 with additional sclk
 
 adc: adc@126C0000 {
 	compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
-	reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+	reg = <0x126C0000 0x100>;
 	interrupts = <0 137 0>;
 	#io-channel-cells = <1>;
 	io-channel-ranges;
@@ -61,6 +79,7 @@ adc: adc@126C0000 {
 	clock-names = "adc", "sclk";
 
 	vdd-supply = <&buck5_reg>;
+	samsung,syscon-phandle = <&pmu_system_controller>;
 };
 
 Example: Adding child nodes in dts file
diff --git a/Bindings/arm/samsung/exynos-chipid.txt b/Bindings/arm/samsung/exynos-chipid.txt
new file mode 100644
index 000000000000..85c5dfd4a720
--- /dev/null
+++ b/Bindings/arm/samsung/exynos-chipid.txt
@@ -0,0 +1,12 @@
+SAMSUNG Exynos SoCs Chipid driver.
+
+Required properties:
+- compatible : Should at least contain "samsung,exynos4210-chipid".
+
+- reg: offset and length of the register set
+
+Example:
+	chipid@10000000 {
+		compatible = "samsung,exynos4210-chipid";
+		reg = <0x10000000 0x100>;
+	};
diff --git a/Bindings/arm/samsung/pmu.txt b/Bindings/arm/samsung/pmu.txt
index 1e1979b229ff..67b211381f2b 100644
--- a/Bindings/arm/samsung/pmu.txt
+++ b/Bindings/arm/samsung/pmu.txt
@@ -10,6 +10,7 @@ Properties:
 		   - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
 		   - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
 		   - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
+		   - "samsung,exynos7-pmu" - for Exynos7 SoC.
 		second value must be always "syscon".
 
  - reg : offset and length of the register set.
diff --git a/Bindings/arm/shmobile.txt b/Bindings/arm/shmobile.txt
new file mode 100644
index 000000000000..51147cb5c036
--- /dev/null
+++ b/Bindings/arm/shmobile.txt
@@ -0,0 +1,71 @@
+Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
+--------------------------------------------------------------------
+
+SoCs:
+
+  - Emma Mobile EV2
+    compatible = "renesas,emev2"
+  - RZ/A1H (R7S72100)
+    compatible = "renesas,r7s72100"
+  - SH-Mobile AP4 (R8A73720/SH7372)
+    compatible = "renesas,sh7372"
+  - SH-Mobile AG5 (R8A73A00/SH73A0)
+    compatible = "renesas,sh73a0"
+  - R-Mobile APE6 (R8A73A40)
+    compatible = "renesas,r8a73a4"
+  - R-Mobile A1 (R8A77400)
+    compatible = "renesas,r8a7740"
+  - R-Car M1A (R8A77781)
+    compatible = "renesas,r8a7778"
+  - R-Car H1 (R8A77790)
+    compatible = "renesas,r8a7779"
+  - R-Car H2 (R8A77900)
+    compatible = "renesas,r8a7790"
+  - R-Car M2-W (R8A77910)
+    compatible = "renesas,r8a7791"
+  - R-Car V2H (R8A77920)
+    compatible = "renesas,r8a7792"
+  - R-Car M2-N (R8A77930)
+    compatible = "renesas,r8a7793"
+  - R-Car E2 (R8A77940)
+    compatible = "renesas,r8a7794"
+
+
+Boards:
+
+  - Alt
+    compatible = "renesas,alt", "renesas,r8a7794"
+  - APE6-EVM
+    compatible = "renesas,ape6evm", "renesas,r8a73a4"
+  - APE6-EVM - Reference Device Tree Implementation
+    compatible = "renesas,ape6evm-reference", "renesas,r8a73a4"
+  - Atmark Techno Armadillo-800 EVA
+    compatible = "renesas,armadillo800eva"
+  - BOCK-W
+    compatible = "renesas,bockw", "renesas,r8a7778"
+  - BOCK-W - Reference Device Tree Implementation
+    compatible = "renesas,bockw-reference", "renesas,r8a7778"
+  - Genmai (RTK772100BC00000BR)
+    compatible = "renesas,genmai", "renesas,r7s72100"
+  - Gose
+    compatible = "renesas,gose", "renesas,r8a7793"
+  - Henninger
+    compatible = "renesas,henninger", "renesas,r8a7791"
+  - Koelsch (RTP0RC7791SEB00010S)
+    compatible = "renesas,koelsch", "renesas,r8a7791"
+  - Kyoto Microcomputer Co. KZM-A9-Dual
+    compatible = "renesas,kzm9d", "renesas,emev2"
+  - Kyoto Microcomputer Co. KZM-A9-GT
+    compatible = "renesas,kzm9g", "renesas,sh73a0"
+  - Kyoto Microcomputer Co. KZM-A9-GT - Reference Device Tree Implementation
+    compatible = "renesas,kzm9g-reference", "renesas,sh73a0"
+  - Lager (RTP0RC7790SEB00010S)
+    compatible = "renesas,lager", "renesas,r8a7790"
+  - Mackerel (R0P7372LC0016RL, AP4 EVM 2nd)
+    compatible = "renesas,mackerel"
+  - Marzen
+    compatible = "renesas,marzen", "renesas,r8a7779"
+
+Note: Reference Device Tree Implementations are temporary implementations
+      to ease the migration from platform devices to Device Tree, and are
+      intended to be removed in the future.
diff --git a/Bindings/arm/sirf.txt b/Bindings/arm/sirf.txt
index c6ba6d3c747f..7b28ee6fee91 100644
--- a/Bindings/arm/sirf.txt
+++ b/Bindings/arm/sirf.txt
@@ -3,7 +3,9 @@ CSR SiRFprimaII and SiRFmarco device tree bindings.
 
 Required root node properties:
     - compatible:
+    - "sirf,atlas6-cb" : atlas6 "cb" evaluation board
+    - "sirf,atlas6" : atlas6 device based board
+    - "sirf,atlas7-cb" : atlas7 "cb" evaluation board
+    - "sirf,atlas7" : atlas7 device based board
     - "sirf,prima2-cb" : prima2 "cb" evaluation board
-    - "sirf,marco-cb" : marco "cb" evaluation board
     - "sirf,prima2" : prima2 device based board
-    - "sirf,marco" : marco device based board
diff --git a/Bindings/arm/sprd.txt b/Bindings/arm/sprd.txt
new file mode 100644
index 000000000000..31a629dc75b8
--- /dev/null
+++ b/Bindings/arm/sprd.txt
@@ -0,0 +1,11 @@
+Spreadtrum SoC Platforms Device Tree Bindings
+----------------------------------------------------
+
+Sharkl64 is a Spreadtrum's SoC Platform which is based
+on ARM 64-bit processor.
+
+SC9836 openphone board with SC9836 SoC based on the
+Sharkl64 Platform shall have the following properties.
+
+Required root node properties:
+        - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
diff --git a/Bindings/arm/ste-nomadik.txt b/Bindings/arm/ste-nomadik.txt
index 6256ec31666d..2fdff5a806cf 100644
--- a/Bindings/arm/ste-nomadik.txt
+++ b/Bindings/arm/ste-nomadik.txt
@@ -10,6 +10,12 @@ Required root node property: src
 
 Boards with the Nomadik SoC include:
 
+Nomadik NHK-15 board manufactured by ST Microelectronics:
+
+Required root node property:
+
+compatible="st,nomadik-nhk-15";
+
 S8815 "MiniKit" manufactured by Calao Systems:
 
 Required root node property:
diff --git a/Bindings/arm/sti.txt b/Bindings/arm/sti.txt
index 92f16c78bb69..d70ec358736c 100644
--- a/Bindings/arm/sti.txt
+++ b/Bindings/arm/sti.txt
@@ -13,3 +13,7 @@ Boards with the ST STiH407 SoC shall have the following properties:
 Required root node property:
 compatible = "st,stih407";
 
+Boards with the ST STiH418 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih418";
+
diff --git a/Bindings/arm/sunxi.txt b/Bindings/arm/sunxi.txt
new file mode 100644
index 000000000000..42941fdefb11
--- /dev/null
+++ b/Bindings/arm/sunxi.txt
@@ -0,0 +1,12 @@
+Allwinner sunXi Platforms Device Tree Bindings
+
+Each device tree must specify which Allwinner SoC it uses,
+using one of the following compatible strings:
+
+  allwinner,sun4i-a10
+  allwinner,sun5i-a10s
+  allwinner,sun5i-a13
+  allwinner,sun6i-a31
+  allwinner,sun7i-a20
+  allwinner,sun8i-a23
+  allwinner,sun9i-a80
diff --git a/Bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Bindings/arm/tegra/nvidia,tegra20-ahb.txt
index 234406d41c12..067c9790062f 100644
--- a/Bindings/arm/tegra/nvidia,tegra20-ahb.txt
+++ b/Bindings/arm/tegra/nvidia,tegra20-ahb.txt
@@ -1,7 +1,10 @@
 NVIDIA Tegra AHB
 
 Required properties:
-- compatible : "nvidia,tegra20-ahb" or "nvidia,tegra30-ahb"
+- compatible : For Tegra20, must contain "nvidia,tegra20-ahb".  For
+  Tegra30, must contain "nvidia,tegra30-ahb".  Otherwise, must contain
+  '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124,
+  tegra132, or tegra210.
 - reg : Should contain 1 register ranges(address and length)
 
 Example:
diff --git a/Bindings/arm/tegra/nvidia,tegra20-flowctrl.txt b/Bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
new file mode 100644
index 000000000000..ccf0adddc820
--- /dev/null
+++ b/Bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
@@ -0,0 +1,12 @@
+NVIDIA Tegra Flow Controller
+
+Required properties:
+- compatible: Should be "nvidia,tegra<chip>-flowctrl"
+- reg: Should contain one register range (address and length)
+
+Example:
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra20-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
diff --git a/Bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Bindings/arm/tegra/nvidia,tegra20-pmc.txt
index 68ac65f82a1c..02c27004d4a8 100644
--- a/Bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ b/Bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -6,7 +6,11 @@ modes. It provides power-gating controllers for SoC and CPU power-islands.
 
 Required properties:
 - name : Should be pmc
-- compatible : Should contain "nvidia,tegra<chip>-pmc".
+- compatible : For Tegra20, must contain "nvidia,tegra20-pmc".  For Tegra30,
+  must contain "nvidia,tegra30-pmc".  For Tegra114, must contain
+  "nvidia,tegra114-pmc".  For Tegra124, must contain "nvidia,tegra124-pmc".
+  Otherwise, must contain "nvidia,<chip>-pmc", plus at least one of the
+  above, where <chip> is tegra132.
 - reg : Offset and length of the register set for the device
 - clocks : Must contain an entry for each entry in clock-names.
   See ../clocks/clock-bindings.txt for details.
@@ -47,6 +51,23 @@ Required properties when nvidia,suspend-mode=<0>:
   sleep mode, the warm boot code will restore some PLLs, clocks and then
   bring up CPU0 for resuming the system.
 
+Hardware-triggered thermal reset:
+On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists,
+hardware-triggered thermal reset will be enabled.
+
+Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
+- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are
+                             described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the
+                             Tegra K1 Technical Reference Manual.
+- nvidia,bus-addr : Bus address of the PMU on the I2C bus
+- nvidia,reg-addr : I2C register address to write poweroff command to
+- nvidia,reg-data : Poweroff command to write to PMU
+
+Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
+- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command.
+                     Defaults to 0. Valid values are described in section 12.5.2
+                     "Pinmux Support" of the Tegra4 Technical Reference Manual.
+
 Example:
 
 / SoC dts including file
@@ -69,6 +90,15 @@ pmc@7000f400 {
 / Tegra board dts file
 {
 	...
+	pmc@7000f400 {
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+	...
 	clocks {
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/Bindings/arm/ux500/power_domain.txt b/Bindings/arm/ux500/power_domain.txt
new file mode 100644
index 000000000000..5679d1742d3e
--- /dev/null
+++ b/Bindings/arm/ux500/power_domain.txt
@@ -0,0 +1,35 @@
+* ST-Ericsson UX500 PM Domains
+
+UX500 supports multiple PM domains which are used to gate power to one or
+more peripherals on the SOC.
+
+The implementation of PM domains for UX500 are based upon the generic PM domain
+and use the corresponding DT bindings.
+
+==PM domain providers==
+
+Required properties:
+ - compatible: Must be "stericsson,ux500-pm-domains".
+ - #power-domain-cells : Number of cells in a power domain specifier, must be 1.
+
+Example:
+	pm_domains: pm_domains0 {
+		compatible = "stericsson,ux500-pm-domains";
+		#power-domain-cells = <1>;
+	};
+
+==PM domain consumers==
+
+Required properties:
+ - power-domains: A phandle and PM domain specifier. Below are the list of
+		valid specifiers:
+
+		Index	Specifier
+		-----	---------
+		0	DOMAIN_VAPE
+
+Example:
+	sdi0_per1@80126000 {
+		compatible = "arm,pl18x", "arm,primecell";
+		power-domains = <&pm_domains DOMAIN_VAPE>
+	};
diff --git a/Bindings/arm/versatile-sysreg.txt b/Bindings/arm/versatile-sysreg.txt
new file mode 100644
index 000000000000..a4f15262d717
--- /dev/null
+++ b/Bindings/arm/versatile-sysreg.txt
@@ -0,0 +1,10 @@
+ARM Versatile system registers
+--------------------------------------
+
+This is a system control registers block, providing multiple low level
+platform functions like board detection and identification, software
+interrupt generation, MMC and NOR Flash control etc.
+
+Required node properties:
+- compatible value : = "arm,versatile-sysreg", "syscon"
+- reg : physical base address and the size of the registers window
diff --git a/Bindings/ata/ahci-platform.txt b/Bindings/ata/ahci-platform.txt
index 4ab09f2202d4..c2340eeeb97f 100644
--- a/Bindings/ata/ahci-platform.txt
+++ b/Bindings/ata/ahci-platform.txt
@@ -37,9 +37,10 @@ Required properties when using sub-nodes:
 
 
 Sub-nodes required properties:
-- reg               : the port number
-- phys              : reference to the SATA PHY node
-
+- reg		    : the port number
+And at least one of the following properties:
+- phys		    : reference to the SATA PHY node
+- target-supply    : regulator for SATA target power
 
 Examples:
         sata@ffe08000 {
@@ -68,10 +69,12 @@ With sub-nodes:
 		sata0: sata-port@0 {
 			reg = <0>;
 			phys = <&sata_phy 0>;
+			target-supply = <&reg_sata0>;
 		};
 
 		sata1: sata-port@1 {
 			reg = <1>;
 			phys = <&sata_phy 1>;
+			target-supply = <&reg_sata1>;;
 		};
 	};
diff --git a/Bindings/ata/cavium-compact-flash.txt b/Bindings/ata/cavium-compact-flash.txt
index 93986a5a8018..3bacc8e0931e 100644
--- a/Bindings/ata/cavium-compact-flash.txt
+++ b/Bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
 
   Compatibility with many Cavium evaluation boards.
 
-- reg: The base address of the the CF chip select banks.  Depending on
+- reg: The base address of the CF chip select banks.  Depending on
   the device configuration, there may be one or two banks.
 
 - cavium,bus-width: The width of the connection to the CF devices.  Valid
diff --git a/Bindings/ata/marvell.txt b/Bindings/ata/marvell.txt
index 1c8351604d38..b460edd12766 100644
--- a/Bindings/ata/marvell.txt
+++ b/Bindings/ata/marvell.txt
@@ -6,11 +6,17 @@ Required Properties:
 - interrupts    : Interrupt controller is using
 - nr-ports      : Number of SATA ports in use.
 
+Optional Properties:
+- phys		: List of phandles to sata phys
+- phy-names	: Should be "0", "1", etc, one number per phandle
+
 Example:
 
 	sata@80000 {
 		compatible = "marvell,orion-sata";
 		reg = <0x80000 0x5000>;
 		interrupts = <21>;
+		phys = <&sata_phy0>, <&sata_phy1>;
+		phy-names = "0", "1";
 		nr-ports = <2>;
 	}
diff --git a/Bindings/ata/qcom-sata.txt b/Bindings/ata/qcom-sata.txt
new file mode 100644
index 000000000000..094de91cd9fd
--- /dev/null
+++ b/Bindings/ata/qcom-sata.txt
@@ -0,0 +1,48 @@
+* Qualcomm AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible		: compatible list, must contain "generic-ahci"
+- interrupts		: <interrupt mapping for SATA IRQ>
+- reg			: <registers mapping>
+- phys			: Must contain exactly one entry as specified
+			  in phy-bindings.txt
+- phy-names		: Must be "sata-phy"
+
+Required properties for "qcom,ipq806x-ahci" compatible:
+- clocks		: Must contain an entry for each entry in clock-names.
+- clock-names		: Shall be:
+				"slave_iface" - Fabric port AHB clock for SATA
+				"iface" - AHB clock
+				"core" - core clock
+				"rxoob" - RX out-of-band clock
+				"pmalive" - Power Module Alive clock
+- assigned-clocks	: Shall be:
+				SATA_RXOOB_CLK
+				SATA_PMALIVE_CLK
+- assigned-clock-rates	: Shall be:
+				100Mhz (100000000) for SATA_RXOOB_CLK
+				100Mhz (100000000) for SATA_PMALIVE_CLK
+
+Example:
+	sata@29000000 {
+		compatible = "qcom,ipq806x-ahci", "generic-ahci";
+		reg = <0x29000000 0x180>;
+
+		interrupts = <0 209 0x0>;
+
+		clocks = <&gcc SFAB_SATA_S_H_CLK>,
+			 <&gcc SATA_H_CLK>,
+			 <&gcc SATA_A_CLK>,
+			 <&gcc SATA_RXOOB_CLK>,
+			 <&gcc SATA_PMALIVE_CLK>;
+		clock-names = "slave_iface", "iface", "core",
+				"rxoob", "pmalive";
+		assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+		assigned-clock-rates = <100000000>, <100000000>;
+
+		phys = <&sata_phy>;
+		phy-names = "sata-phy";
+	};
diff --git a/Bindings/ata/sata_rcar.txt b/Bindings/ata/sata_rcar.txt
index 1e6111333fa8..2493a5a31655 100644
--- a/Bindings/ata/sata_rcar.txt
+++ b/Bindings/ata/sata_rcar.txt
@@ -3,16 +3,21 @@
 Required properties:
 - compatible		: should contain one of the following:
 			  - "renesas,sata-r8a7779" for R-Car H1
-			  - "renesas,sata-r8a7790" for R-Car H2
-			  - "renesas,sata-r8a7791" for R-Car M2
+			    ("renesas,rcar-sata" is deprecated)
+			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
+			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
+			  - "renesas,sata-r8a7791" for R-Car M2-W
+			  - "renesas,sata-r8a7793" for R-Car M2-N
 - reg			: address and length of the SATA registers;
 - interrupts		: must consist of one interrupt specifier.
+- clocks		: must contain a reference to the functional clock.
 
 Example:
 
-sata: sata@fc600000 {
-	compatible = "renesas,sata-r8a7779";
-	reg = <0xfc600000 0x2000>;
+sata0: sata@ee300000 {
+	compatible = "renesas,sata-r8a7791";
+	reg = <0 0xee300000 0 0x2000>;
 	interrupt-parent = <&gic>;
-	interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
 };
diff --git a/Bindings/ata/tegra-sata.txt b/Bindings/ata/tegra-sata.txt
index 946f2072570b..66c83c3e8915 100644
--- a/Bindings/ata/tegra-sata.txt
+++ b/Bindings/ata/tegra-sata.txt
@@ -1,7 +1,9 @@
 Tegra124 SoC SATA AHCI controller
 
 Required properties :
-- compatible : "nvidia,tegra124-ahci".
+- compatible : For Tegra124, must contain "nvidia,tegra124-ahci".  Otherwise,
+  must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
+  is tegra132.
 - reg : Should contain 2 entries:
   - AHCI register set (SATA BAR5)
   - SATA register set
diff --git a/Bindings/btmrvl.txt b/Bindings/btmrvl.txt
new file mode 100644
index 000000000000..58f964bb0a52
--- /dev/null
+++ b/Bindings/btmrvl.txt
@@ -0,0 +1,29 @@
+btmrvl
+------
+
+Required properties:
+
+  - compatible : must be "btmrvl,cfgdata"
+
+Optional properties:
+
+  - btmrvl,cal-data : Calibration data downloaded to the device during
+		      initialization. This is an array of 28 values(u8).
+
+  - btmrvl,gpio-gap : gpio and gap (in msecs) combination to be
+		      configured.
+
+Example:
+
+GPIO pin 13 is configured as a wakeup source and GAP is set to 100 msecs
+in below example.
+
+btmrvl {
+	compatible = "btmrvl,cfgdata";
+
+	btmrvl,cal-data = /bits/ 8 <
+		0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
+		0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
+		0x00 0x00 0xf0 0x00>;
+	btmrvl,gpio-gap = <0x0d64>;
+};
diff --git a/Bindings/bus/bcma.txt b/Bindings/bus/bcma.txt
new file mode 100644
index 000000000000..edd44d802139
--- /dev/null
+++ b/Bindings/bus/bcma.txt
@@ -0,0 +1,53 @@
+Driver for ARM AXI Bus with Broadcom Plugins (bcma)
+
+Required properties:
+
+- compatible : brcm,bus-axi
+
+- reg : iomem address range of chipcommon core
+
+The cores on the AXI bus are automatically detected by bcma with the
+memory ranges they are using and they get registered afterwards.
+Automatic detection of the IRQ number is not working on
+BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
+them manually through device tree. Use an interrupt-map to specify the
+IRQ used by the devices on the bus. The first address is just an index,
+because we do not have any special register.
+
+The top-level axi bus may contain children representing attached cores
+(devices). This is needed since some hardware details can't be auto
+detected (e.g. IRQ numbers). Also some of the cores may be responsible
+for extra things, e.g. ChipCommon providing access to the GPIO chip.
+
+Example:
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* Ethernet Controller 0 */
+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+
+			/* PCIe Controller 0 */
+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon {
+			reg = <0x00000000 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
diff --git a/Bindings/bus/brcm,gisb-arb.txt b/Bindings/bus/brcm,gisb-arb.txt
index e2d501d20c9a..1eceefb20f01 100644
--- a/Bindings/bus/brcm,gisb-arb.txt
+++ b/Bindings/bus/brcm,gisb-arb.txt
@@ -2,7 +2,11 @@ Broadcom GISB bus Arbiter controller
 
 Required properties:
 
-- compatible: should be "brcm,gisb-arb"
+- compatible:
+    "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for 28nm chips
+    "brcm,bcm7435-gisb-arb" for newer 40nm chips
+    "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
+    "brcm,bcm7038-gisb-arb" for 130nm chips
 - reg: specifies the base physical address and size of the registers
 - interrupt-parent: specifies the phandle to the parent interrupt controller
   this arbiter gets interrupt line from
diff --git a/Bindings/bus/mvebu-mbus.txt b/Bindings/bus/mvebu-mbus.txt
index 5fa44f52a0b8..fa6cde41b460 100644
--- a/Bindings/bus/mvebu-mbus.txt
+++ b/Bindings/bus/mvebu-mbus.txt
@@ -6,8 +6,8 @@ Required properties:
 - compatible:	 Should be set to one of the following:
 		 marvell,armada370-mbus
 		 marvell,armadaxp-mbus
-		 marvell,armada370-mbus
-		 marvell,armadaxp-mbus
+		 marvell,armada375-mbus
+		 marvell,armada380-mbus
 		 marvell,kirkwood-mbus
 		 marvell,dove-mbus
 		 marvell,orion5x-88f5281-mbus
@@ -48,9 +48,12 @@ Required properties:
 - compatible:	Should be set to "marvell,mbus-controller".
 
 - reg:          Device's register space.
-		Two entries are expected (see the examples below):
-		the first one controls the devices decoding window and
-		the second one controls the SDRAM decoding window.
+		Two or three entries are expected (see the examples below):
+		the first one controls the devices decoding window,
+		the second one controls the SDRAM decoding window and
+		the third controls the MBus bridge (only with the
+		marvell,armada370-mbus and marvell,armadaxp-mbus
+		compatible strings)
 
 Example:
 
@@ -67,7 +70,7 @@ Example:
 
 			mbusc: mbus-controller@20000 {
 				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
+				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
 			};
 
 			/* more children ...*/
@@ -126,7 +129,7 @@ are skipped.
 
 			mbusc: mbus-controller@20000 {
 				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
+				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
 			};
 
 			/* more children ...*/
@@ -170,7 +173,7 @@ Using this macro, the above example would be:
 
 			mbusc: mbus-controller@20000 {
 				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
+				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
 			};
 
 			/* other children */
@@ -266,7 +269,7 @@ See the example below, where a more complete device tree is shown:
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 
 			mbusc: mbus-controller@20000 {
-				reg = <0x20000 0x100>, <0x20180 0x20>;
+				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
 			};
 
 			interrupt-controller@20000 {
diff --git a/Bindings/c6x/dscr.txt b/Bindings/c6x/dscr.txt
index b0e97144cfb1..92672235de57 100644
--- a/Bindings/c6x/dscr.txt
+++ b/Bindings/c6x/dscr.txt
@@ -12,7 +12,7 @@ configuration register for writes. These configuration register may be used to
 enable (and disable in some cases) SoC pin drivers, select peripheral clock
 sources (internal or pin), etc. In some cases, a configuration register is
 write once or the individual bits are write once. In addition to device config,
-the DSCR block may provide registers which which are used to reset peripherals,
+the DSCR block may provide registers which are used to reset peripherals,
 provide device ID information, provide ethernet MAC addresses, as well as other
 miscellaneous functions.
 
diff --git a/Bindings/chosen.txt b/Bindings/chosen.txt
new file mode 100644
index 000000000000..ed838f453f7a
--- /dev/null
+++ b/Bindings/chosen.txt
@@ -0,0 +1,46 @@
+The chosen node
+---------------
+
+The chosen node does not represent a real device, but serves as a place
+for passing data between firmware and the operating system, like boot
+arguments. Data in the chosen node does not represent the hardware.
+
+
+stdout-path property
+--------------------
+
+Device trees may specify the device to be used for boot console output
+with a stdout-path property under /chosen, as described in ePAPR, e.g.
+
+/ {
+	chosen {
+		stdout-path = "/serial@f00:115200";
+	};
+
+	serial@f00 {
+		compatible = "vendor,some-uart";
+		reg = <0xf00 0x10>;
+	};
+};
+
+If the character ":" is present in the value, this terminates the path.
+The meaning of any characters following the ":" is device-specific, and
+must be specified in the relevant binding documentation.
+
+For UART devices, the preferred binding is a string in the form:
+
+	<baud>{<parity>{<bits>{<flow>}}}
+
+where
+
+	baud	- baud rate in decimal
+	parity	- 'n' (none), 'o', (odd) or 'e' (even)
+	bits	- number of data bits
+	flow	- 'r' (rts)
+
+For example: 115200n8r
+
+Implementation note: Linux will look for the property "linux,stdout-path" or
+on PowerPC "stdout" if "stdout-path" is not found.  However, the
+"linux,stdout-path" and "stdout" properties are deprecated. New platforms
+should only use the "stdout-path" property.
diff --git a/Bindings/clock/alphascale,acc.txt b/Bindings/clock/alphascale,acc.txt
new file mode 100644
index 000000000000..62e67e883e76
--- /dev/null
+++ b/Bindings/clock/alphascale,acc.txt
@@ -0,0 +1,115 @@
+Alphascale Clock Controller
+
+The ACC (Alphascale Clock Controller) is responsible of choising proper
+clock source, setting deviders and clock gates.
+
+Required properties for the ACC node:
+ - compatible: must be "alphascale,asm9260-clock-controller"
+ - reg: must contain the ACC register base and size
+ - #clock-cells : shall be set to 1.
+
+Simple one-cell clock specifier format is used, where the only cell is used
+as an index of the clock inside the provider.
+It is encouraged to use dt-binding for clock index definitions. SoC specific
+dt-binding should be included to the device tree descriptor. For example
+Alphascale ASM9260:
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+This binding contains two types of clock providers:
+ _AHB_ - AHB gate;
+ _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+All clock specific details can be found in the SoC documentation.
+CLKID_AHB_ROM		0
+CLKID_AHB_RAM		1
+CLKID_AHB_GPIO		2
+CLKID_AHB_MAC		3
+CLKID_AHB_EMI		4
+CLKID_AHB_USB0		5
+CLKID_AHB_USB1		6
+CLKID_AHB_DMA0		7
+CLKID_AHB_DMA1		8
+CLKID_AHB_UART0		9
+CLKID_AHB_UART1		10
+CLKID_AHB_UART2		11
+CLKID_AHB_UART3		12
+CLKID_AHB_UART4		13
+CLKID_AHB_UART5		14
+CLKID_AHB_UART6		15
+CLKID_AHB_UART7		16
+CLKID_AHB_UART8		17
+CLKID_AHB_UART9		18
+CLKID_AHB_I2S0		19
+CLKID_AHB_I2C0		20
+CLKID_AHB_I2C1		21
+CLKID_AHB_SSP0		22
+CLKID_AHB_IOCONFIG	23
+CLKID_AHB_WDT		24
+CLKID_AHB_CAN0		25
+CLKID_AHB_CAN1		26
+CLKID_AHB_MPWM		27
+CLKID_AHB_SPI0		28
+CLKID_AHB_SPI1		29
+CLKID_AHB_QEI		30
+CLKID_AHB_QUADSPI0	31
+CLKID_AHB_CAMIF		32
+CLKID_AHB_LCDIF		33
+CLKID_AHB_TIMER0	34
+CLKID_AHB_TIMER1	35
+CLKID_AHB_TIMER2	36
+CLKID_AHB_TIMER3	37
+CLKID_AHB_IRQ		38
+CLKID_AHB_RTC		39
+CLKID_AHB_NAND		40
+CLKID_AHB_ADC0		41
+CLKID_AHB_LED		42
+CLKID_AHB_DAC0		43
+CLKID_AHB_LCD		44
+CLKID_AHB_I2S1		45
+CLKID_AHB_MAC1		46
+
+CLKID_SYS_CPU		47
+CLKID_SYS_AHB		48
+CLKID_SYS_I2S0M		49
+CLKID_SYS_I2S0S		50
+CLKID_SYS_I2S1M		51
+CLKID_SYS_I2S1S		52
+CLKID_SYS_UART0		53
+CLKID_SYS_UART1		54
+CLKID_SYS_UART2		55
+CLKID_SYS_UART3		56
+CLKID_SYS_UART4		56
+CLKID_SYS_UART5		57
+CLKID_SYS_UART6		58
+CLKID_SYS_UART7		59
+CLKID_SYS_UART8		60
+CLKID_SYS_UART9		61
+CLKID_SYS_SPI0		62
+CLKID_SYS_SPI1		63
+CLKID_SYS_QUADSPI	64
+CLKID_SYS_SSP0		65
+CLKID_SYS_NAND		66
+CLKID_SYS_TRACE		67
+CLKID_SYS_CAMM		68
+CLKID_SYS_WDT		69
+CLKID_SYS_CLKOUT	70
+CLKID_SYS_MAC		71
+CLKID_SYS_LCD		72
+CLKID_SYS_ADCANA	73
+
+Example of clock consumer with _SYS_ and _AHB_ sinks.
+uart4: serial@80010000 {
+	compatible = "alphascale,asm9260-uart";
+	reg = <0x80010000 0x4000>;
+	clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
+	interrupts = <19>;
+	status = "disabled";
+};
+
+Clock consumer with only one, _AHB_ sink.
+timer0: timer@80088000 {
+	compatible = "alphascale,asm9260-timer";
+	reg = <0x80088000 0x4000>;
+	clocks = <&acc CLKID_AHB_TIMER0>;
+	interrupts = <29>;
+};
+
diff --git a/Bindings/clock/arm-integrator.txt b/Bindings/clock/arm-integrator.txt
index ecc69520bcea..11f5f95f571b 100644
--- a/Bindings/clock/arm-integrator.txt
+++ b/Bindings/clock/arm-integrator.txt
@@ -1,6 +1,6 @@
 Clock bindings for ARM Integrator and Versatile Core Module clocks
 
-Auxilary Oscillator Clock
+Auxiliary Oscillator Clock
 
 This is a configurable clock fed from a 24 MHz chrystal,
 used for generating e.g. video clocks. It is located on the
diff --git a/Bindings/clock/at91-clock.txt b/Bindings/clock/at91-clock.txt
index b3d544ca522a..7a4d4926f44e 100644
--- a/Bindings/clock/at91-clock.txt
+++ b/Bindings/clock/at91-clock.txt
@@ -74,6 +74,9 @@ Required properties:
 	"atmel,at91sam9x5-clk-utmi":
 		at91 utmi clock
 
+	"atmel,sama5d4-clk-h32mx":
+		at91 h32mx clock
+
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
 - #size-cells : shall be 0 (reg is used to encode clk id).
@@ -447,3 +450,14 @@ For example:
 		#clock-cells = <0>;
 		clocks = <&main>;
 	};
+
+Required properties for 32 bits bus Matrix clock (h32mx clock):
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall be the master clock source phandle.
+
+For example:
+	h32ck: h32mxck {
+		#clock-cells = <0>;
+		compatible = "atmel,sama5d4-clk-h32mx";
+		clocks = <&mck>;
+	};
diff --git a/Bindings/clock/bcm-cygnus-clock.txt b/Bindings/clock/bcm-cygnus-clock.txt
new file mode 100644
index 000000000000..00d26edec8bc
--- /dev/null
+++ b/Bindings/clock/bcm-cygnus-clock.txt
@@ -0,0 +1,34 @@
+Broadcom Cygnus Clocks
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Currently various "fixed" clocks are declared for peripheral drivers that use
+the common clock framework to reference their core clocks. Proper support of
+these clocks will be added later
+
+Device tree example:
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <1>;
+			clock-frequency = <25000000>;
+		};
+
+		apb_clk: apb_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		periph_clk: periph_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <500000000>;
+		};
+	};
diff --git a/Bindings/clock/exynos3250-clock.txt b/Bindings/clock/exynos3250-clock.txt
index aadc9c59e2d1..f57d9dd9ea85 100644
--- a/Bindings/clock/exynos3250-clock.txt
+++ b/Bindings/clock/exynos3250-clock.txt
@@ -7,6 +7,8 @@ Required Properties:
 
 - compatible: should be one of the following.
   - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
+  - "samsung,exynos3250-cmu-dmc" - controller compatible with
+    Exynos3250 SoC for Dynamic Memory Controller domain.
 
 - reg: physical base address of the controller and length of memory mapped
   region.
@@ -20,7 +22,7 @@ All available clocks are defined as preprocessor macros in
 dt-bindings/clock/exynos3250.h header and can be used in device
 tree sources.
 
-Example 1: An example of a clock controller node is listed below.
+Example 1: Examples of clock controller nodes are listed below.
 
 	cmu: clock-controller@10030000 {
 		compatible = "samsung,exynos3250-cmu";
@@ -28,6 +30,12 @@ Example 1: An example of a clock controller node is listed below.
 		#clock-cells = <1>;
 	};
 
+	cmu_dmc: clock-controller@105C0000 {
+		compatible = "samsung,exynos3250-cmu-dmc";
+		reg = <0x105C0000 0x2000>;
+		#clock-cells = <1>;
+	};
+
 Example 2: UART controller node that consumes the clock generated by the clock
 	   controller. Refer to the standard clock bindings for information
 	   about 'clocks' and 'clock-names' property.
diff --git a/Bindings/clock/exynos4415-clock.txt b/Bindings/clock/exynos4415-clock.txt
new file mode 100644
index 000000000000..847d98bae8cf
--- /dev/null
+++ b/Bindings/clock/exynos4415-clock.txt
@@ -0,0 +1,38 @@
+* Samsung Exynos4415 Clock Controller
+
+The Exynos4415 clock controller generates and supplies clock to various
+consumer devices within the Exynos4415 SoC.
+
+Required properties:
+
+- compatible: should be one of the following:
+  - "samsung,exynos4415-cmu" - for the main system clocks controller
+    (CMU_LEFTBUS, CMU_RIGHTBUS, CMU_TOP, CMU_CPU clock domains).
+  - "samsung,exynos4415-cmu-dmc" - for the Exynos4415 SoC DRAM Memory
+    Controller (DMC) domain clock controller.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos4415.h header and can be used in device
+tree sources.
+
+Example 1: An example of a clock controller node is listed below.
+
+	cmu: clock-controller@10030000 {
+		compatible = "samsung,exynos4415-cmu";
+		reg = <0x10030000 0x18000>;
+		#clock-cells = <1>;
+	};
+
+	cmu-dmc: clock-controller@105C0000 {
+		compatible = "samsung,exynos4415-cmu-dmc";
+		reg = <0x105C0000 0x3000>;
+		#clock-cells = <1>;
+	};
diff --git a/Bindings/clock/exynos7-clock.txt b/Bindings/clock/exynos7-clock.txt
new file mode 100644
index 000000000000..6bf1e7493f61
--- /dev/null
+++ b/Bindings/clock/exynos7-clock.txt
@@ -0,0 +1,108 @@
+* Samsung Exynos7 Clock Controller
+
+Exynos7 clock controller has various blocks which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos7-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+
+Required Properties for Clock Controller:
+
+ - compatible: clock controllers will use one of the following
+	compatible strings to indicate the clock controller
+	functionality.
+
+	- "samsung,exynos7-clock-topc"
+	- "samsung,exynos7-clock-top0"
+	- "samsung,exynos7-clock-top1"
+	- "samsung,exynos7-clock-ccore"
+	- "samsung,exynos7-clock-peric0"
+	- "samsung,exynos7-clock-peric1"
+	- "samsung,exynos7-clock-peris"
+	- "samsung,exynos7-clock-fsys0"
+	- "samsung,exynos7-clock-fsys1"
+	- "samsung,exynos7-clock-mscl"
+	- "samsung,exynos7-clock-aud"
+
+ - reg: physical base address of the controller and the length of
+	memory mapped region.
+
+ - #clock-cells: should be 1.
+
+ - clocks: list of clock identifiers which are fed as the input to
+	the given clock controller. Please refer the next section to
+	find the input clocks for a given controller.
+
+- clock-names: list of names of clocks which are fed as the input
+	to the given clock controller.
+
+Input clocks for top0 clock controller:
+	- fin_pll
+	- dout_sclk_bus0_pll
+	- dout_sclk_bus1_pll
+	- dout_sclk_cc_pll
+	- dout_sclk_mfc_pll
+	- dout_sclk_aud_pll
+
+Input clocks for top1 clock controller:
+	- fin_pll
+	- dout_sclk_bus0_pll
+	- dout_sclk_bus1_pll
+	- dout_sclk_cc_pll
+	- dout_sclk_mfc_pll
+
+Input clocks for ccore clock controller:
+	- fin_pll
+	- dout_aclk_ccore_133
+
+Input clocks for peric0 clock controller:
+	- fin_pll
+	- dout_aclk_peric0_66
+	- sclk_uart0
+
+Input clocks for peric1 clock controller:
+	- fin_pll
+	- dout_aclk_peric1_66
+	- sclk_uart1
+	- sclk_uart2
+	- sclk_uart3
+	- sclk_spi0
+	- sclk_spi1
+	- sclk_spi2
+	- sclk_spi3
+	- sclk_spi4
+	- sclk_i2s1
+	- sclk_pcm1
+	- sclk_spdif
+
+Input clocks for peris clock controller:
+	- fin_pll
+	- dout_aclk_peris_66
+
+Input clocks for fsys0 clock controller:
+	- fin_pll
+	- dout_aclk_fsys0_200
+	- dout_sclk_mmc2
+
+Input clocks for fsys1 clock controller:
+	- fin_pll
+	- dout_aclk_fsys1_200
+	- dout_sclk_mmc0
+	- dout_sclk_mmc1
+
+Input clocks for aud clock controller:
+	- fin_pll
+	- fout_aud_pll
diff --git a/Bindings/clock/gpio-gate-clock.txt b/Bindings/clock/gpio-gate-clock.txt
new file mode 100644
index 000000000000..d3379ff9b84b
--- /dev/null
+++ b/Bindings/clock/gpio-gate-clock.txt
@@ -0,0 +1,21 @@
+Binding for simple gpio gated clock.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "gpio-gate-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- enable-gpios : GPIO reference for enabling and disabling the clock.
+
+Optional properties:
+- clocks: Maximum of one parent clock is supported.
+
+Example:
+	clock {
+		compatible = "gpio-gate-clock";
+		clocks = <&parentclk>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+	};
diff --git a/Bindings/clock/marvell,mmp2.txt b/Bindings/clock/marvell,mmp2.txt
new file mode 100644
index 000000000000..af376a01f2b7
--- /dev/null
+++ b/Bindings/clock/marvell,mmp2.txt
@@ -0,0 +1,21 @@
+* Marvell MMP2 Clock Controller
+
+The MMP2 clock subsystem generates and supplies clock to various
+controllers within the MMP2 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "marvell,mmp2-clock" - controller compatible with MMP2 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+  region. There are 3 places in SOC has clock control logic:
+  "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>.
diff --git a/Bindings/clock/marvell,pxa168.txt b/Bindings/clock/marvell,pxa168.txt
new file mode 100644
index 000000000000..c62eb1d173a6
--- /dev/null
+++ b/Bindings/clock/marvell,pxa168.txt
@@ -0,0 +1,21 @@
+* Marvell PXA168 Clock Controller
+
+The PXA168 clock subsystem generates and supplies clock to various
+controllers within the PXA168 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "marvell,pxa168-clock" - controller compatible with PXA168 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+  region. There are 3 places in SOC has clock control logic:
+  "mpmu", "apmu", "apbc". So three reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell,pxa168.h>.
diff --git a/Bindings/clock/marvell,pxa910.txt b/Bindings/clock/marvell,pxa910.txt
new file mode 100644
index 000000000000..d9f41f3c03a0
--- /dev/null
+++ b/Bindings/clock/marvell,pxa910.txt
@@ -0,0 +1,21 @@
+* Marvell PXA910 Clock Controller
+
+The PXA910 clock subsystem generates and supplies clock to various
+controllers within the PXA910 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "marvell,pxa910-clock" - controller compatible with PXA910 SoC.
+
+- reg: physical base address of the clock subsystem and length of memory mapped
+  region. There are 4 places in SOC has clock control logic:
+  "mpmu", "apmu", "apbc", "apbcp". So four reg spaces need to be defined.
+
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/marvell-pxa910.h>.
diff --git a/Bindings/clock/maxim,max77686.txt b/Bindings/clock/maxim,max77686.txt
index 96ce71bbd745..9c40739a661a 100644
--- a/Bindings/clock/maxim,max77686.txt
+++ b/Bindings/clock/maxim,max77686.txt
@@ -9,13 +9,21 @@ The MAX77686 contains three 32.768khz clock outputs that can be controlled
 Following properties should be presend in main device node of the MFD chip.
 
 Required properties:
-- #clock-cells: simple one-cell clock specifier format is used, where the
-  only cell is used as an index of the clock inside the provider. Following
-  indices are allowed:
+
+- #clock-cells: from common clock binding; shall be set to 1.
+
+Optional properties:
+- clock-output-names: From common clock binding.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
     - 0: 32khz_ap clock,
     - 1: 32khz_cp clock,
     - 2: 32khz_pmic clock.
 
+Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h
+header and can be used in device tree sources.
+
 Example: Node of the MFD chip
 
 	max77686: max77686@09 {
@@ -34,5 +42,5 @@ Example: Clock consumer node
 		compatible = "bar,foo";
 		/* ... */
 		clock-names = "my-clock";
-		clocks = <&max77686 2>;
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
 	};
diff --git a/Bindings/clock/maxim,max77802.txt b/Bindings/clock/maxim,max77802.txt
new file mode 100644
index 000000000000..c6dc7835f06c
--- /dev/null
+++ b/Bindings/clock/maxim,max77802.txt
@@ -0,0 +1,44 @@
+Binding for Maxim MAX77802 32k clock generator block
+
+This is a part of device tree bindings of MAX77802 multi-function device.
+More information can be found in bindings/mfd/max77802.txt file.
+
+The MAX77802 contains two 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C.
+
+Following properties should be present in main device node of the MFD chip.
+
+Required properties:
+- #clock-cells: From common clock binding; shall be set to 1.
+
+Optional properties:
+- clock-output-names: From common clock binding.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
+     - 0: 32khz_ap clock,
+     - 1: 32khz_cp clock.
+
+Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77802.h
+header and can be used in device tree sources.
+
+Example: Node of the MFD chip
+
+	max77802: max77802@09 {
+		compatible = "maxim,max77802";
+		interrupt-parent = <&wakeup_eint>;
+		interrupts = <26 0>;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		/* ... */
+	};
+
+Example: Clock consumer node
+
+	foo@0 {
+		compatible = "bar,foo";
+		/* ... */
+		clock-names = "my-clock";
+		clocks = <&max77802 MAX77802_CLK_32K_AP>;
+	};
diff --git a/Bindings/clock/nvidia,tegra124-car.txt b/Bindings/clock/nvidia,tegra124-car.txt
index ded5d6212c84..c6620bc96703 100644
--- a/Bindings/clock/nvidia,tegra124-car.txt
+++ b/Bindings/clock/nvidia,tegra124-car.txt
@@ -1,4 +1,4 @@
-NVIDIA Tegra124 Clock And Reset Controller
+NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
 
 This binding uses the common clock binding:
 Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -7,14 +7,16 @@ The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
 for muxing and gating Tegra's clocks, and setting their rates.
 
 Required properties :
-- compatible : Should be "nvidia,tegra124-car"
+- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
 - reg : Should contain CAR registers location and length
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
   In clock consumers, this cell represents the clock ID exposed by the
-  CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra124-car.h>.
+  CAR. The assignments may be found in the header files
+  <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common
+  to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h>
+  (for Tegra124-specific clocks).
 - #reset-cells : Should be 1.
   In clock consumers, this cell represents the bit number in the CAR's
   array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
diff --git a/Bindings/clock/pxa-clock.txt b/Bindings/clock/pxa-clock.txt
new file mode 100644
index 000000000000..4b4a9024bd99
--- /dev/null
+++ b/Bindings/clock/pxa-clock.txt
@@ -0,0 +1,16 @@
+* Clock bindings for Marvell PXA chips
+
+Required properties:
+- compatible: Should be "marvell,pxa-clocks"
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell (see include/.../pxa-clock.h).
+
+Examples:
+
+pxa2xx_clks: pxa2xx_clks@41300004 {
+        compatible = "marvell,pxa-clocks";
+        #clock-cells = <1>;
+        status = "okay";
+};
diff --git a/Bindings/clock/qcom,lcc.txt b/Bindings/clock/qcom,lcc.txt
new file mode 100644
index 000000000000..dd755be63a01
--- /dev/null
+++ b/Bindings/clock/qcom,lcc.txt
@@ -0,0 +1,21 @@
+Qualcomm LPASS Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+			"qcom,lcc-msm8960"
+			"qcom,lcc-apq8064"
+			"qcom,lcc-ipq8064"
+
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+- #reset-cells : shall contain 1
+
+Example:
+	clock-controller@28000000 {
+		compatible = "qcom,lcc-ipq8064";
+		reg = <0x28000000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
diff --git a/Bindings/clock/qoriq-clock.txt b/Bindings/clock/qoriq-clock.txt
index 5666812fc42b..df4a259a6898 100644
--- a/Bindings/clock/qoriq-clock.txt
+++ b/Bindings/clock/qoriq-clock.txt
@@ -1,6 +1,6 @@
-* Clock Block on Freescale CoreNet Platforms
+* Clock Block on Freescale QorIQ Platforms
 
-Freescale CoreNet chips take primary clocking input from the external
+Freescale qoriq chips take primary clocking input from the external
 SYSCLK signal. The SYSCLK input (frequency) is multiplied using
 multiple phase locked loops (PLL) to create a variety of frequencies
 which can then be passed to a variety of internal logic, including
@@ -29,6 +29,7 @@ Required properties:
 	* "fsl,t4240-clockgen"
 	* "fsl,b4420-clockgen"
 	* "fsl,b4860-clockgen"
+	* "fsl,ls1021a-clockgen"
 	Chassis clock strings include:
 	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
 	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
@@ -62,6 +63,8 @@ Required properties:
 		It takes parent's clock-frequency as its clock.
 	* "fsl,qoriq-sysclk-2.0": for input system clock (v2.0).
 		It takes parent's clock-frequency as its clock.
+	* "fsl,qoriq-platform-pll-1.0" for the platform PLL clock (v1.0)
+	* "fsl,qoriq-platform-pll-2.0" for the platform PLL clock (v2.0)
 - #clock-cells: From common clock binding. The number of cells in a
 	clock-specifier. Should be <0> for "fsl,qoriq-sysclk-[1,2].0"
 	clocks, or <1> for "fsl,qoriq-core-pll-[1,2].0" clocks.
@@ -128,8 +131,16 @@ Example for clock block and clock provider:
 			clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
 			clock-output-names = "cmux1";
 		};
+
+		platform-pll: platform-pll@c00 {
+			#clock-cells = <1>;
+			reg = <0xc00 0x4>;
+			compatible = "fsl,qoriq-platform-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "platform-pll", "platform-pll-div2";
+		};
 	};
-  }
+};
 
 Example for clock consumer:
 
@@ -139,4 +150,4 @@ Example for clock consumer:
 		clocks = <&mux0>;
 		...
 	};
-  }
+};
diff --git a/Bindings/clock/renesas,cpg-div6-clocks.txt b/Bindings/clock/renesas,cpg-div6-clocks.txt
index 952e373178d2..054f65f9319c 100644
--- a/Bindings/clock/renesas,cpg-div6-clocks.txt
+++ b/Bindings/clock/renesas,cpg-div6-clocks.txt
@@ -7,11 +7,16 @@ to 64.
 Required Properties:
 
   - compatible: Must be one of the following
+    - "renesas,r8a73a4-div6-clock" for R8A73A4 (R-Mobile APE6) DIV6 clocks
+    - "renesas,r8a7740-div6-clock" for R8A7740 (R-Mobile A1) DIV6 clocks
     - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks
     - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks
+    - "renesas,sh73a0-div6-clock" for SH73A0 (SH-Mobile AG5) DIV6 clocks
     - "renesas,cpg-div6-clock" for generic DIV6 clocks
   - reg: Base address and length of the memory resource used by the DIV6 clock
-  - clocks: Reference to the parent clock
+  - clocks: Reference to the parent clock(s); either one, four, or eight
+    clocks must be specified.  For clocks with multiple parents, invalid
+    settings must be specified as "<0>".
   - #clock-cells: Must be 0
   - clock-output-names: The name of the clock as a free-form string
 
@@ -19,10 +24,11 @@ Required Properties:
 Example
 -------
 
-	sd2_clk: sd2_clk@e6150078 {
-		compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
-		reg = <0 0xe6150078 0 4>;
-		clocks = <&pll1_div2_clk>;
+	sdhi2_clk: sdhi2_clk@e615007c {
+		compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
+		reg = <0 0xe615007c 0 4>;
+		clocks = <&pll1_div2_clk>, <&cpg_clocks R8A73A4_CLK_PLL2S>,
+			 <0>, <&extal2_clk>;
 		#clock-cells = <0>;
-		clock-output-names = "sd2";
+		clock-output-names = "sdhi2ck";
 	};
diff --git a/Bindings/clock/renesas,cpg-mstp-clocks.txt b/Bindings/clock/renesas,cpg-mstp-clocks.txt
index 8a92b5fb3540..0a80fa70ca26 100644
--- a/Bindings/clock/renesas,cpg-mstp-clocks.txt
+++ b/Bindings/clock/renesas,cpg-mstp-clocks.txt
@@ -11,9 +11,13 @@ Required Properties:
 
   - compatible: Must be one of the following
     - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
+    - "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks
+    - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
     - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
     - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
     - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks
+    - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks
+    - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks
     - "renesas,cpg-mstp-clock" for generic MSTP gate clocks
   - reg: Base address and length of the I/O mapped registers used by the MSTP
     clocks. The first register is the clock control register and is mandatory.
@@ -23,11 +27,11 @@ Required Properties:
     must appear in the same order as the output clocks.
   - #clock-cells: Must be 1
   - clock-output-names: The name of the clocks as free-form strings
-  - renesas,clock-indices: Indices of the gate clocks into the group (0 to 31)
+  - clock-indices: Indices of the gate clocks into the group (0 to 31)
 
-The clocks, clock-output-names and renesas,clock-indices properties contain one
-entry per gate clock. The MSTP groups are sparsely populated. Unimplemented
-gate clocks must not be declared.
+The clocks, clock-output-names and clock-indices properties contain one entry
+per gate clock. The MSTP groups are sparsely populated. Unimplemented gate
+clocks must not be declared.
 
 
 Example
diff --git a/Bindings/clock/renesas,r8a73a4-cpg-clocks.txt b/Bindings/clock/renesas,r8a73a4-cpg-clocks.txt
new file mode 100644
index 000000000000..ece92393e80d
--- /dev/null
+++ b/Bindings/clock/renesas,r8a73a4-cpg-clocks.txt
@@ -0,0 +1,33 @@
+* Renesas R8A73A4 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A73A4 SoC. It includes five PLLs
+and several fixed ratio dividers.
+
+Required Properties:
+
+  - compatible: Must be "renesas,r8a73a4-cpg-clocks"
+
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the parent clocks ("extal1" and "extal2")
+
+  - #clock-cells: Must be 1
+
+  - clock-output-names: The names of the clocks. Supported clocks are "main",
+    "pll0", "pll1", "pll2", "pll2s", "pll2h", "z", "z2", "i", "m3", "b",
+    "m1", "m2", "zx", "zs", and "hp".
+
+
+Example
+-------
+
+        cpg_clocks: cpg_clocks@e6150000 {
+                compatible = "renesas,r8a73a4-cpg-clocks";
+                reg = <0 0xe6150000 0 0x10000>;
+                clocks = <&extal1_clk>, <&extal2_clk>;
+                #clock-cells = <1>;
+                clock-output-names = "main", "pll0", "pll1", "pll2",
+                                     "pll2s", "pll2h", "z", "z2",
+                                     "i", "m3", "b", "m1", "m2",
+                                     "zx", "zs", "hp";
+        };
diff --git a/Bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
index 7b41c2fe54db..b02944fba9de 100644
--- a/Bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
+++ b/Bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
@@ -8,14 +8,18 @@ Required Properties:
   - compatible: Must be one of
     - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
     - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
+    - "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
+    - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
     - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
 
   - reg: Base address and length of the memory resource used by the CPG
 
-  - clocks: Reference to the parent clock
+  - clocks: References to the parent clocks: first to the EXTAL clock, second
+    to the USB_EXTAL clock
   - #clock-cells: Must be 1
   - clock-output-names: The names of the clocks. Supported clocks are "main",
-    "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z"
+    "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
+    "adsp"
 
 
 Example
@@ -25,8 +29,9 @@ Example
 		compatible = "renesas,r8a7790-cpg-clocks",
 			     "renesas,rcar-gen2-cpg-clocks";
 		reg = <0 0xe6150000 0 0x1000>;
-		clocks = <&extal_clk>;
+		clocks = <&extal_clk &usb_extal_clk>;
 		#clock-cells = <1>;
 		clock-output-names = "main", "pll0, "pll1", "pll3",
-				     "lb", "qspi", "sdh", "sd0", "sd1", "z";
+				     "lb", "qspi", "sdh", "sd0", "sd1", "z",
+				     "rcan", "adsp";
 	};
diff --git a/Bindings/clock/renesas,sh73a0-cpg-clocks.txt b/Bindings/clock/renesas,sh73a0-cpg-clocks.txt
new file mode 100644
index 000000000000..a8978ec94831
--- /dev/null
+++ b/Bindings/clock/renesas,sh73a0-cpg-clocks.txt
@@ -0,0 +1,35 @@
+These bindings should be considered EXPERIMENTAL for now.
+
+* Renesas SH73A0 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the SH73A0 SoC. It includes four PLLs
+and several fixed ratio dividers.
+
+Required Properties:
+
+  - compatible: Must be "renesas,sh73a0-cpg-clocks"
+
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the parent clocks ("extal1" and "extal2")
+
+  - #clock-cells: Must be 1
+
+  - clock-output-names: The names of the clocks. Supported clocks are "main",
+    "pll0", "pll1", "pll2", "pll3", "dsi0phy", "dsi1phy", "zg", "m3", "b",
+    "m1", "m2", "z", "zx", and "hp".
+
+
+Example
+-------
+
+        cpg_clocks: cpg_clocks@e6150000 {
+                compatible = "renesas,sh73a0-cpg-clocks";
+                reg = <0 0xe6150000 0 0x10000>;
+                clocks = <&extal1_clk>, <&extal2_clk>;
+                #clock-cells = <1>;
+                clock-output-names = "main", "pll0", "pll1", "pll2",
+                                     "pll3", "dsi0phy", "dsi1phy",
+                                     "zg", "m3", "b", "m1", "m2",
+                                     "z", "zx", "hp";
+        };
diff --git a/Bindings/clock/st/st,flexgen.txt b/Bindings/clock/st/st,flexgen.txt
index 1d3ace088172..b7ee5c7e0f75 100644
--- a/Bindings/clock/st/st,flexgen.txt
+++ b/Bindings/clock/st/st,flexgen.txt
@@ -11,7 +11,7 @@ Please find an example below:
 
     Clockgen block diagram
     -------------------------------------------------------------------
-   |                     Flexgen stucture                              |
+   |                     Flexgen structure                             |
    |                  ---------------------------------------------    |
    |                 |    -------       --------       --------    |   |
 clk_sysin            |   |       |     |        |     |        |   |   |
diff --git a/Bindings/clock/sunxi.txt b/Bindings/clock/sunxi.txt
index d3a5c3c6d677..60b44285250d 100644
--- a/Bindings/clock/sunxi.txt
+++ b/Bindings/clock/sunxi.txt
@@ -10,43 +10,57 @@ Required properties:
 	"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
 	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
 	"allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23
+	"allwinner,sun9i-a80-pll4-clk" - for the peripheral PLLs on A80
 	"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
 	"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
 	"allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
+	"allwinner,sun9i-a80-gt-clk" - for the GT bus clock on A80
 	"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
 	"allwinner,sun4i-a10-axi-clk" - for the AXI clock
 	"allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23
 	"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
 	"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
+	"allwinner,sun9i-a80-ahb-clk" - for the AHB bus clocks on A80
 	"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
 	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
 	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
 	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
 	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
-	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
+	"allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
 	"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
+	"allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
+	"allwinner,sun9i-a80-ahb1-gates-clk" - for the AHB1 gates on A80
+	"allwinner,sun9i-a80-ahb2-gates-clk" - for the AHB2 gates on A80
 	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
 	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
 	"allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23
+	"allwinner,sun9i-a80-apb0-clk" - for the APB0 bus clock on A80
 	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
 	"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
 	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
 	"allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23
+	"allwinner,sun9i-a80-apb0-gates-clk" - for the APB0 gates on A80
 	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
-	"allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
+	"allwinner,sun9i-a80-apb1-clk" - for the APB1 bus clock on A80
 	"allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
 	"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
 	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
 	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
 	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
 	"allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23
-	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
+	"allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80
 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
 	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
+	"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
+	"allwinner,sun4i-a10-mmc-clk" - for the MMC clock
+	"allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
+	"allwinner,sun9i-a80-mmc-config-clk" - for mmc gates + resets on A80
 	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
+	"allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80
+	"allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23
 	"allwinner,sun7i-a20-out-clk" - for the external output clocks
 	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
 	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
@@ -59,8 +73,11 @@ Required properties for all clocks:
 	multiplexed clocks, the list order must match the hardware
 	programming order.
 - #clock-cells : from common clock binding; shall be set to 0 except for
-	"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk" and
-	"allwinner,sun4i-pll6-clk" where it shall be set to 1
+	the following compatibles where it shall be set to 1:
+	"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk",
+	"allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk",
+	"allwinner,*-usb-clk", "allwinner,*-mmc-clk",
+	"allwinner,*-mmc-config-clk"
 - clock-output-names : shall be the corresponding names of the outputs.
 	If the clock module only has one output, the name shall be the
 	module name.
@@ -68,6 +85,10 @@ Required properties for all clocks:
 And "allwinner,*-usb-clk" clocks also require:
 - reset-cells : shall be set to 1
 
+The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
+- #reset-cells : shall be set to 1
+- resets : shall be the reset control phandle for the mmc block.
+
 For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
 dummy clocks at 25 MHz and 125 MHz, respectively. See example.
 
@@ -75,6 +96,20 @@ Clock consumers should specify the desired clocks they use with a
 "clocks" phandle cell. Consumers that are using a gated clock should
 provide an additional ID in their clock property. This ID is the
 offset of the bit controlling this particular gate in the register.
+For the other clocks with "#clock-cells" = 1, the additional ID shall
+refer to the index of the output.
+
+For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output
+is the normal PLL6 output, or "pll6". The second output is rate doubled
+PLL6, or "pll6x2".
+
+The "allwinner,*-mmc-clk" clocks have three different outputs: the
+main clock, with the ID 0, and the output and sample clocks, with the
+IDs 1 and 2, respectively.
+
+The "allwinner,sun9i-a80-mmc-config-clk" clock has one clock/reset output
+per mmc controller. The number of outputs is determined by the size of
+the address block, which is related to the overall mmc block.
 
 For example:
 
@@ -102,6 +137,14 @@ pll5: clk@01c20020 {
 	clock-output-names = "pll5_ddr", "pll5_other";
 };
 
+pll6: clk@01c20028 {
+	#clock-cells = <1>;
+	compatible = "allwinner,sun6i-a31-pll6-clk";
+	reg = <0x01c20028 0x4>;
+	clocks = <&osc24M>;
+	clock-output-names = "pll6", "pll6x2";
+};
+
 cpu: cpu@01c20054 {
 	#clock-cells = <0>;
 	compatible = "allwinner,sun4i-a10-cpu-clk";
@@ -111,11 +154,11 @@ cpu: cpu@01c20054 {
 };
 
 mmc0_clk: clk@01c20088 {
-	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-mod0-clk";
+	#clock-cells = <1>;
+	compatible = "allwinner,sun4i-a10-mmc-clk";
 	reg = <0x01c20088 0x4>;
 	clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-	clock-output-names = "mmc0";
+	clock-output-names = "mmc0", "mmc0_output", "mmc0_sample";
 };
 
 mii_phy_tx_clk: clk@2 {
@@ -143,3 +186,16 @@ gmac_clk: clk@01c20164 {
 	clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
 	clock-output-names = "gmac";
 };
+
+mmc_config_clk: clk@01c13000 {
+	compatible = "allwinner,sun9i-a80-mmc-config-clk";
+	reg = <0x01c13000 0x10>;
+	clocks = <&ahb0_gates 8>;
+	clock-names = "ahb";
+	resets = <&ahb0_resets 8>;
+	reset-names = "ahb";
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+	clock-output-names = "mmc0_config", "mmc1_config",
+			     "mmc2_config", "mmc3_config";
+};
diff --git a/Bindings/clock/ti,cdce706.txt b/Bindings/clock/ti,cdce706.txt
new file mode 100644
index 000000000000..616836e7e1e2
--- /dev/null
+++ b/Bindings/clock/ti,cdce706.txt
@@ -0,0 +1,42 @@
+Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
+synthesizer/multiplier/divider.
+
+Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf
+
+I2C device node required properties:
+- compatible: shall be "ti,cdce706".
+- reg: i2c device address, shall be in range [0x68...0x6b].
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+  handles, shall be reference clock(s) connected to CLK_IN0
+  and CLK_IN1 pins.
+- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
+  in case of crystal oscillator or differential signal input
+  configuration. Use clk_in0 and clk_in1 in case of independent
+  single-ended LVCMOS inputs configuration.
+
+Example:
+
+	clocks {
+		clk54: clk54 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <54000000>;
+		};
+	};
+	...
+	i2c0: i2c-master@0d090000 {
+		...
+		cdce706: clock-synth@69 {
+			compatible = "ti,cdce706";
+			#clock-cells = <1>;
+			reg = <0x69>;
+			clocks = <&clk54>;
+			clock-names = "clk_in0";
+		};
+	};
+	...
+	simple-audio-card,codec {
+		...
+		clocks = <&cdce706 4>;
+	};
diff --git a/Bindings/clock/ti/fapll.txt b/Bindings/clock/ti/fapll.txt
new file mode 100644
index 000000000000..c19b3f253b8c
--- /dev/null
+++ b/Bindings/clock/ti/fapll.txt
@@ -0,0 +1,33 @@
+Binding for Texas Instruments FAPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped FAPLL with usually two selectable input clocks
+(reference clock and bypass clock), and one or more child
+syntesizers.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dm816-fapll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the FAPLL.
+
+Examples:
+	main_fapll: main_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x400 0x40>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>,
+				<6>, <7>;
+		clock-output-names = "main_pll_clk1",
+				     "main_pll_clk2",
+				     "main_pll_clk3",
+				     "main_pll_clk4",
+				     "main_pll_clk5",
+				     "main_pll_clk6",
+				     "main_pll_clk7";
+	};
diff --git a/Bindings/clock/vf610-clock.txt b/Bindings/clock/vf610-clock.txt
index c80863d344ac..63f9f1ac3439 100644
--- a/Bindings/clock/vf610-clock.txt
+++ b/Bindings/clock/vf610-clock.txt
@@ -5,6 +5,19 @@ Required properties:
 - reg: Address and length of the register set
 - #clock-cells: Should be <1>
 
+Optional properties:
+- clocks: list of clock identifiers which are external input clocks to the
+	given clock controller. Please refer the next section to find
+	the input clocks for a given controller.
+- clock-names: list of names of clocks which are exteral input clocks to the
+	given clock controller.
+
+Input clocks for top clock controller:
+	- sxosc (external crystal oscillator 32KHz, recommended)
+	- fxosc (external crystal oscillator 24MHz, recommended)
+	- audio_ext
+	- enet_ext
+
 The clock consumer should specify the desired clock by having the clock
 ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
 for the full list of VF610 clock IDs.
@@ -15,6 +28,8 @@ clks: ccm@4006b000 {
 	compatible = "fsl,vf610-ccm";
 	reg = <0x4006b000 0x1000>;
 	#clock-cells = <1>;
+	clocks = <&sxosc>, <&fxosc>;
+	clock-names = "sxosc", "fxosc";
 };
 
 uart1: serial@40028000 {
diff --git a/Bindings/cpufreq/cpufreq-dt.txt b/Bindings/cpufreq/cpufreq-dt.txt
new file mode 100644
index 000000000000..e41c98ffbccb
--- /dev/null
+++ b/Bindings/cpufreq/cpufreq-dt.txt
@@ -0,0 +1,64 @@
+Generic cpufreq driver
+
+It is a generic DT based cpufreq driver for frequency management.  It supports
+both uniprocessor (UP) and symmetric multiprocessor (SMP) systems which share
+clock and voltage across all CPUs.
+
+Both required and optional properties listed below must be defined
+under node /cpus/cpu@0.
+
+Required properties:
+- None
+
+Optional properties:
+- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for
+  details. OPPs *must* be supplied either via DT, i.e. this property, or
+  populated at runtime.
+- clock-latency: Specify the possible maximum transition latency for clock,
+  in unit of nanoseconds.
+- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
+- #cooling-cells:
+- cooling-min-level:
+- cooling-max-level:
+     Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
+
+Examples:
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu@0 {
+		compatible = "arm,cortex-a9";
+		reg = <0>;
+		next-level-cache = <&L2>;
+		operating-points = <
+			/* kHz    uV */
+			792000  1100000
+			396000  950000
+			198000  850000
+		>;
+		clock-latency = <61036>; /* two CLK32 periods */
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <2>;
+	};
+
+	cpu@1 {
+		compatible = "arm,cortex-a9";
+		reg = <1>;
+		next-level-cache = <&L2>;
+	};
+
+	cpu@2 {
+		compatible = "arm,cortex-a9";
+		reg = <2>;
+		next-level-cache = <&L2>;
+	};
+
+	cpu@3 {
+		compatible = "arm,cortex-a9";
+		reg = <3>;
+		next-level-cache = <&L2>;
+	};
+};
diff --git a/Bindings/crypto/fsl-imx-sahara.txt b/Bindings/crypto/fsl-imx-sahara.txt
index 5c65eccd0e56..e8a35c71e947 100644
--- a/Bindings/crypto/fsl-imx-sahara.txt
+++ b/Bindings/crypto/fsl-imx-sahara.txt
@@ -1,5 +1,5 @@
 Freescale SAHARA Cryptographic Accelerator included in some i.MX chips.
-Currently only i.MX27 is supported.
+Currently only i.MX27 and i.MX53 are supported.
 
 Required properties:
 - compatible : Should be "fsl,<soc>-sahara"
diff --git a/Bindings/crypto/fsl-sec6.txt b/Bindings/crypto/fsl-sec6.txt
index c0a20cd972e3..baf8a3c1b469 100644
--- a/Bindings/crypto/fsl-sec6.txt
+++ b/Bindings/crypto/fsl-sec6.txt
@@ -1,5 +1,5 @@
 SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
-Currently Freescale powerpc chip C29X is embeded with SEC 6.
+Currently Freescale powerpc chip C29X is embedded with SEC 6.
 SEC 6 device tree binding include:
    -SEC 6 Node
    -Job Ring Node
diff --git a/Bindings/devfreq/event/exynos-ppmu.txt b/Bindings/devfreq/event/exynos-ppmu.txt
new file mode 100644
index 000000000000..b54bf3a2ff57
--- /dev/null
+++ b/Bindings/devfreq/event/exynos-ppmu.txt
@@ -0,0 +1,110 @@
+
+* Samsung Exynos PPMU (Platform Performance Monitoring Unit) device
+
+The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
+each IP. PPMU provides the primitive values to get performance data. These
+PPMU events provide information of the SoC's behaviors so that you may
+use to analyze system performance, to make behaviors visible and to count
+usages of each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC).
+The Exynos PPMU driver uses the devfreq-event class to provide event data
+to various devfreq devices. The devfreq devices would use the event data when
+derterming the current state of each IP.
+
+Required properties:
+- compatible: Should be "samsung,exynos-ppmu".
+- reg: physical base address of each PPMU and length of memory mapped region.
+
+Optional properties:
+- clock-names : the name of clock used by the PPMU, "ppmu"
+- clocks : phandles for clock specified in "clock-names" property
+- #clock-cells: should be 1.
+
+Example1 : PPMU nodes in exynos3250.dtsi are listed below.
+
+		ppmu_dmc0: ppmu_dmc0@106a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106a0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_dmc1: ppmu_dmc1@106b0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106b0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_cpu: ppmu_cpu@106c0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106c0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_rightbus: ppmu_rightbus@112a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x112a0000 0x2000>;
+			clocks = <&cmu CLK_PPMURIGHT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_leftbus: ppmu_leftbus0@116a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x116a0000 0x2000>;
+			clocks = <&cmu CLK_PPMULEFT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+Example2 : Events of each PPMU node in exynos3250-rinato.dts are listed below.
+
+	&ppmu_dmc0 {
+		status = "okay";
+
+		events {
+			ppmu_dmc0_3: ppmu-event3-dmc0 {
+				event-name = "ppmu-event3-dmc0";
+			};
+
+			ppmu_dmc0_2: ppmu-event2-dmc0 {
+				event-name = "ppmu-event2-dmc0";
+			};
+
+			ppmu_dmc0_1: ppmu-event1-dmc0 {
+				event-name = "ppmu-event1-dmc0";
+			};
+
+			ppmu_dmc0_0: ppmu-event0-dmc0 {
+				event-name = "ppmu-event0-dmc0";
+			};
+		};
+	};
+
+	&ppmu_dmc1 {
+		status = "okay";
+
+		events {
+			ppmu_dmc1_3: ppmu-event3-dmc1 {
+				event-name = "ppmu-event3-dmc1";
+			};
+		};
+	};
+
+	&ppmu_leftbus {
+		status = "okay";
+
+		events {
+			ppmu_leftbus_3: ppmu-event3-leftbus {
+				event-name = "ppmu-event3-leftbus";
+			};
+		};
+	};
+
+	&ppmu_rightbus {
+		status = "okay";
+
+		events {
+			ppmu_rightbus_3: ppmu-event3-rightbus {
+				event-name = "ppmu-event3-rightbus";
+			};
+		};
+	};
diff --git a/Bindings/dma/atmel-xdma.txt b/Bindings/dma/atmel-xdma.txt
new file mode 100644
index 000000000000..0eb2b3207e08
--- /dev/null
+++ b/Bindings/dma/atmel-xdma.txt
@@ -0,0 +1,54 @@
+* Atmel Extensible Direct Memory Access Controller (XDMAC)
+
+* XDMA Controller
+Required properties:
+- compatible: Should be "atmel,<chip>-dma".
+  <chip> compatible description:
+  - sama5d4: first SoC adding the XDMAC
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <1>, used to represent the number of integer cells in
+the dmas property of client devices.
+  - The 1st cell specifies the channel configuration register:
+    - bit 13: SIF, source interface identifier, used to get the memory
+    interface identifier,
+    - bit 14: DIF, destination interface identifier, used to get the peripheral
+    interface identifier,
+    - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+dma1: dma-controller@f0004000 {
+	compatible = "atmel,sama5d4-dma";
+	reg = <0xf0004000 0x200>;
+	interrupts = <50 4 0>;
+	#dma-cells = <1>;
+};
+
+
+* DMA clients
+DMA clients connected to the Atmel XDMA controller must use the format
+described in the dma.txt file, using a one-cell specifier for each channel.
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. Channel configuration register. Configurable fields are:
+    - bit 13: SIF, source interface identifier, used to get the memory
+    interface identifier,
+    - bit 14: DIF, destination interface identifier, used to get the peripheral
+    interface identifier,
+  - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+i2c2: i2c@f8024000 {
+	compatible = "atmel,at91sam9x5-i2c";
+	reg = <0xf8024000 0x4000>;
+	interrupts = <34 4 6>;
+	dmas = <&dma1
+		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+		 | AT91_XDMAC_DT_PERID(6))>,
+	       <&dma1
+		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+		| AT91_XDMAC_DT_PERID(7))>;
+	dma-names = "tx", "rx";
+};
diff --git a/Bindings/dma/fsl-imx-sdma.txt b/Bindings/dma/fsl-imx-sdma.txt
index 4659fd952301..dc8d3aac1aa9 100644
--- a/Bindings/dma/fsl-imx-sdma.txt
+++ b/Bindings/dma/fsl-imx-sdma.txt
@@ -48,6 +48,7 @@ The full ID of peripheral types can be found below.
 	21	ESAI
 	22	SSI Dual FIFO	(needs firmware ver >= 2)
 	23	Shared ASRC
+	24	SAI
 
 The third cell specifies the transfer priority as below.
 
diff --git a/Bindings/dma/img-mdc-dma.txt b/Bindings/dma/img-mdc-dma.txt
new file mode 100644
index 000000000000..28c1341db346
--- /dev/null
+++ b/Bindings/dma/img-mdc-dma.txt
@@ -0,0 +1,57 @@
+* IMG Multi-threaded DMA Controller (MDC)
+
+Required properties:
+- compatible: Must be "img,pistachio-mdc-dma".
+- reg: Must contain the base address and length of the MDC registers.
+- interrupts: Must contain all the per-channel DMA interrupts.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - sys: MDC system interface clock.
+- img,cr-periph: Must contain a phandle to the peripheral control syscon
+  node which contains the DMA request to channel mapping registers.
+- img,max-burst-multiplier: Must be the maximum supported burst size multiplier.
+  The maximum burst size is this value multiplied by the hardware-reported bus
+  width.
+- #dma-cells: Must be 3:
+  - The first cell is the peripheral's DMA request line.
+  - The second cell is a bitmap specifying to which channels the DMA request
+    line may be mapped (i.e. bit N set indicates channel N is usable).
+  - The third cell is the thread ID to be used by the channel.
+
+Optional properties:
+- dma-channels: Number of supported DMA channels, up to 32.  If not specified
+  the number reported by the hardware is used.
+
+Example:
+
+mdc: dma-controller@18143000 {
+	compatible = "img,pistachio-mdc-dma";
+	reg = <0x18143000 0x1000>;
+	interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&system_clk>;
+	clock-names = "sys";
+
+	img,max-burst-multiplier = <16>;
+	img,cr-periph = <&cr_periph>;
+
+	#dma-cells = <3>;
+};
+
+spi@18100f00 {
+	...
+	dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+	dma-names = "tx", "rx";
+	...
+};
diff --git a/Bindings/dma/qcom_adm.txt b/Bindings/dma/qcom_adm.txt
new file mode 100644
index 000000000000..9bcab9115982
--- /dev/null
+++ b/Bindings/dma/qcom_adm.txt
@@ -0,0 +1,62 @@
+QCOM ADM DMA Controller
+
+Required properties:
+- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
+- reg: Address range for DMA registers
+- interrupts: Should contain one interrupt shared by all channels
+- #dma-cells: must be <2>.  First cell denotes the channel number.  Second cell
+  denotes CRCI (client rate control interface) flow control assignment.
+- clocks: Should contain the core clock and interface clock.
+- clock-names: Must contain "core" for the core clock and "iface" for the
+  interface clock.
+- resets: Must contain an entry for each entry in reset names.
+- reset-names: Must include the following entries:
+  - clk
+  - c0
+  - c1
+  - c2
+- qcom,ee: indicates the security domain identifier used in the secure world.
+
+Example:
+		adm_dma: dma@18300000 {
+			compatible = "qcom,adm";
+			reg = <0x18300000 0x100000>;
+			interrupts = <0 170 0>;
+			#dma-cells = <2>;
+
+			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+			clock-names = "core", "iface";
+
+			resets = <&gcc ADM0_RESET>,
+				<&gcc ADM0_C0_RESET>,
+				<&gcc ADM0_C1_RESET>,
+				<&gcc ADM0_C2_RESET>;
+			reset-names = "clk", "c0", "c1", "c2";
+			qcom,ee = <0>;
+		};
+
+DMA clients must use the format descripted in the dma.txt file, using a three
+cell specifier for each channel.
+
+Each dmas request consists of 3 cells:
+ 1. phandle pointing to the DMA controller
+ 2. channel number
+ 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
+    The CRCI is used for flow control.  It identifies the peripheral device that
+    is the source/destination for the transferred data.
+
+Example:
+
+	spi4: spi@1a280000 {
+		status = "ok";
+		spi-max-frequency = <50000000>;
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 0>;
+
+		dmas = <&adm_dma 6 9>,
+			<&adm_dma 5 10>;
+		dma-names = "rx", "tx";
+	};
diff --git a/Bindings/dma/qcom_bam_dma.txt b/Bindings/dma/qcom_bam_dma.txt
index d75a9d767022..f8c3311b7153 100644
--- a/Bindings/dma/qcom_bam_dma.txt
+++ b/Bindings/dma/qcom_bam_dma.txt
@@ -1,7 +1,9 @@
 QCOM BAM DMA controller
 
 Required properties:
-- compatible: must contain "qcom,bam-v1.4.0" for MSM8974
+- compatible: must be one of the following:
+ * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
+ * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
 - reg: Address range for DMA registers
 - interrupts: Should contain the one interrupt shared by all channels
 - #dma-cells: must be <1>, the cell in the dmas property of the client device
diff --git a/Bindings/dma/rcar-audmapp.txt b/Bindings/dma/rcar-audmapp.txt
index 9f1d750d76de..61bca509d7b9 100644
--- a/Bindings/dma/rcar-audmapp.txt
+++ b/Bindings/dma/rcar-audmapp.txt
@@ -16,9 +16,9 @@ Example:
 * DMA client
 
 Required properties:
-- dmas:		a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs,
-		where SRS/DRS values are fixed handles, specified in the SoC
-		manual as the value that would be written into the PDMACHCR.
+- dmas:		a list of <[DMA multiplexer phandle] [SRS << 8 | DRS]> pairs.
+		where SRS/DRS are specified in the SoC manual.
+		It will be written into PDMACHCR as high 16-bit parts.
 - dma-names:	a list of DMA channel names, one per "dmas" entry
 
 Example:
diff --git a/Bindings/dma/renesas,rcar-dmac.txt b/Bindings/dma/renesas,rcar-dmac.txt
index df0f48bcf75a..09daeef1ff22 100644
--- a/Bindings/dma/renesas,rcar-dmac.txt
+++ b/Bindings/dma/renesas,rcar-dmac.txt
@@ -1,13 +1,10 @@
 * Renesas R-Car DMA Controller Device Tree bindings
 
-Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA
+Renesas R-Car Generation 2 SoCs have multiple multi-channel DMA
 controller instances named DMAC capable of serving multiple clients. Channels
 can be dedicated to specific clients or shared between a large number of
 clients.
 
-DMA clients are connected to the DMAC ports referenced by an 8-bit identifier
-called MID/RID.
-
 Each DMA client is connected to one dedicated port of the DMAC, identified by
 an 8-bit port number called the MID/RID. A DMA controller can thus serve up to
 256 clients in total. When the number of hardware channels is lower than the
diff --git a/Bindings/dma/snps-dma.txt b/Bindings/dma/snps-dma.txt
index d58675ea1abf..c261598164a7 100644
--- a/Bindings/dma/snps-dma.txt
+++ b/Bindings/dma/snps-dma.txt
@@ -38,7 +38,7 @@ Example:
 		chan_allocation_order = <1>;
 		chan_priority = <1>;
 		block_size = <0xfff>;
-		data_width = <3 3 0 0>;
+		data_width = <3 3>;
 	};
 
 DMA clients connected to the Designware DMA controller must use the format
diff --git a/Bindings/dma/sun6i-dma.txt b/Bindings/dma/sun6i-dma.txt
index 3e145c1675b1..9cdcba24d7c3 100644
--- a/Bindings/dma/sun6i-dma.txt
+++ b/Bindings/dma/sun6i-dma.txt
@@ -4,7 +4,7 @@ This driver follows the generic DMA bindings defined in dma.txt.
 
 Required properties:
 
-- compatible:	Must be "allwinner,sun6i-a31-dma"
+- compatible:	Must be "allwinner,sun6i-a31-dma" or "allwinner,sun8i-a23-dma"
 - reg:		Should contain the registers base address and length
 - interrupts:	Should contain a reference to the interrupt used by this device
 - clocks:	Should contain a reference to the parent AHB clock
diff --git a/Bindings/dma/xilinx/xilinx_dma.txt b/Bindings/dma/xilinx/xilinx_dma.txt
new file mode 100644
index 000000000000..2291c4098730
--- /dev/null
+++ b/Bindings/dma/xilinx/xilinx_dma.txt
@@ -0,0 +1,65 @@
+Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
+target devices. It can be configured to have one channel or two channels.
+If configured as two channels, one is to transmit to the device and another
+is to receive from the device.
+
+Required properties:
+- compatible: Should be "xlnx,axi-dma-1.00.a"
+- #dma-cells: Should be <1>, see "dmas" property below
+- reg: Should contain DMA registers location and length.
+- dma-channel child node: Should have atleast one channel and can have upto
+	two channels per device. This node specifies the properties of each
+	DMA channel (see child node properties below).
+
+Optional properties:
+- xlnx,include-sg: Tells whether configured for Scatter-mode in
+	the hardware.
+
+Required child node properties:
+- compatible: It should be either "xlnx,axi-dma-mm2s-channel" or
+	"xlnx,axi-dma-s2mm-channel".
+- interrupts: Should contain per channel DMA interrupts.
+- xlnx,datawidth: Should contain the stream data width, take values
+	{32,64...1024}.
+
+Option child node properties:
+- xlnx,include-dre: Tells whether hardware is configured for Data
+	Realignment Engine.
+
+Example:
+++++++++
+
+axi_dma_0: axidma@40400000 {
+	compatible = "xlnx,axi-dma-1.00.a";
+	#dma_cells = <1>;
+	reg = < 0x40400000 0x10000 >;
+	dma-channel@40400000 {
+		compatible = "xlnx,axi-dma-mm2s-channel";
+		interrupts = < 0 59 4 >;
+		xlnx,datawidth = <0x40>;
+	} ;
+	dma-channel@40400030 {
+		compatible = "xlnx,axi-dma-s2mm-channel";
+		interrupts = < 0 58 4 >;
+		xlnx,datawidth = <0x40>;
+	} ;
+} ;
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[DMA device phandle] [Channel ID]> pairs,
+	where Channel ID is '0' for write/tx and '1' for read/rx
+	channel.
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+++++++++
+
+dmatest_0: dmatest@0 {
+	compatible ="xlnx,axi-dma-test-1.00.a";
+	dmas = <&axi_dma_0 0
+		&axi_dma_0 1>;
+	dma-names = "dma0", "dma1";
+} ;
diff --git a/Bindings/dma/xilinx/xilinx_vdma.txt b/Bindings/dma/xilinx/xilinx_vdma.txt
index 1405ed071bb4..e4c4d47f8137 100644
--- a/Bindings/dma/xilinx/xilinx_vdma.txt
+++ b/Bindings/dma/xilinx/xilinx_vdma.txt
@@ -25,7 +25,7 @@ Required child node properties:
 - compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
 	"xlnx,axi-vdma-s2mm-channel".
 - interrupts: Should contain per channel VDMA interrupts.
-- xlnx,data-width: Should contain the stream data width, take values
+- xlnx,datawidth: Should contain the stream data width, take values
 	{32,64...1024}.
 
 Optional child node properties:
diff --git a/Bindings/drm/atmel/hlcdc-dc.txt b/Bindings/drm/atmel/hlcdc-dc.txt
new file mode 100644
index 000000000000..ebc1a914bda3
--- /dev/null
+++ b/Bindings/drm/atmel/hlcdc-dc.txt
@@ -0,0 +1,53 @@
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
+
+The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
+See ../mfd/atmel-hlcdc.txt for more details.
+
+Required properties:
+ - compatible: value should be "atmel,hlcdc-display-controller"
+ - pinctrl-names: the pin control state names. Should contain "default".
+ - pinctrl-0: should contain the default pinctrl states.
+ - #address-cells: should be set to 1.
+ - #size-cells: should be set to 0.
+
+Required children nodes:
+ Children nodes are encoding available output ports and their connections
+ to external devices using the OF graph reprensentation (see ../graph.txt).
+ At least one port node is required.
+
+Example:
+
+	hlcdc: hlcdc@f0030000 {
+		compatible = "atmel,sama5d3-hlcdc";
+		reg = <0xf0030000 0x2000>;
+		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+		clock-names = "periph_clk","sys_clk", "slow_clk";
+		status = "disabled";
+
+		hlcdc-display-controller {
+			compatible = "atmel,hlcdc-display-controller";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				hlcdc_panel_output: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+
+		hlcdc_pwm: hlcdc-pwm {
+			compatible = "atmel,hlcdc-pwm";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_pwm>;
+			#pwm-cells = <3>;
+		};
+	};
diff --git a/Bindings/drm/bridge/dw_hdmi.txt b/Bindings/drm/bridge/dw_hdmi.txt
new file mode 100644
index 000000000000..a905c1413558
--- /dev/null
+++ b/Bindings/drm/bridge/dw_hdmi.txt
@@ -0,0 +1,50 @@
+DesignWare HDMI bridge bindings
+
+Required properties:
+- compatible: platform specific such as:
+   * "snps,dw-hdmi-tx"
+   * "fsl,imx6q-hdmi"
+   * "fsl,imx6dl-hdmi"
+   * "rockchip,rk3288-dw-hdmi"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The HDMI interrupt number
+- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
+  as described in Documentation/devicetree/bindings/clock/clock-bindings.txt,
+  the clocks are soc specific, the clock-names should be "iahb", "isfr"
+-port@[X]: SoC specific port nodes with endpoint definitions as defined
+   in Documentation/devicetree/bindings/media/video-interfaces.txt,
+   please refer to the SoC specific binding document:
+    * Documentation/devicetree/bindings/drm/imx/hdmi.txt
+    * Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
+
+Optional properties
+- reg-io-width: the width of the reg:1,4, default set to 1 if not present
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
+
+Example:
+	hdmi: hdmi@0120000 {
+		compatible = "fsl,imx6q-hdmi";
+		reg = <0x00120000 0x9000>;
+		interrupts = <0 115 0x04>;
+		gpr = <&gpr>;
+		clocks = <&clks 123>, <&clks 124>;
+		clock-names = "iahb", "isfr";
+		ddc-i2c-bus = <&i2c2>;
+
+		port@0 {
+			reg = <0>;
+
+			hdmi_mux_0: endpoint {
+				remote-endpoint = <&ipu1_di0_hdmi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			hdmi_mux_1: endpoint {
+				remote-endpoint = <&ipu1_di1_hdmi>;
+			};
+		};
+	};
diff --git a/Bindings/drm/imx/fsl-imx-drm.txt b/Bindings/drm/imx/fsl-imx-drm.txt
new file mode 100644
index 000000000000..e75f0e549fff
--- /dev/null
+++ b/Bindings/drm/imx/fsl-imx-drm.txt
@@ -0,0 +1,83 @@
+Freescale i.MX DRM master device
+================================
+
+The freescale i.MX DRM master device is a virtual device needed to list all
+IPU or other display interface nodes that comprise the graphics subsystem.
+
+Required properties:
+- compatible: Should be "fsl,imx-display-subsystem"
+- ports: Should contain a list of phandles pointing to display interface ports
+  of IPU devices
+
+example:
+
+display-subsystem {
+	compatible = "fsl,display-subsystem";
+	ports = <&ipu_di0>;
+};
+
+
+Freescale i.MX IPUv3
+====================
+
+Required properties:
+- compatible: Should be "fsl,<chip>-ipu"
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain sync interrupt and error interrupt,
+  in this order.
+- resets: phandle pointing to the system reset controller and
+          reset line index, see reset/fsl,imx-src.txt for details
+Optional properties:
+- port@[0-3]: Port nodes with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+  Ports 0 and 1 should correspond to CSI0 and CSI1,
+  ports 2 and 3 should correspond to DI0 and DI1, respectively.
+
+example:
+
+ipu: ipu@18000000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx53-ipu";
+	reg = <0x18000000 0x080000000>;
+	interrupts = <11 10>;
+	resets = <&src 2>;
+
+	ipu_di0: port@2 {
+		reg = <2>;
+
+		ipu_di0_disp0: endpoint {
+			remote-endpoint = <&display_in>;
+		};
+	};
+};
+
+Parallel display support
+========================
+
+Required properties:
+- compatible: Should be "fsl,imx-parallel-display"
+Optional properties:
+- interface_pix_fmt: How this display is connected to the
+  display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
+  and "lvds666".
+- edid: verbatim EDID data block describing attached display.
+- ddc: phandle describing the i2c bus handling the display data
+  channel
+- port: A port node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+example:
+
+display@di0 {
+	compatible = "fsl,imx-parallel-display";
+	edid = [edid-data];
+	interface-pix-fmt = "rgb24";
+
+	port {
+		display_in: endpoint {
+			remote-endpoint = <&ipu_di0_disp0>;
+		};
+	};
+};
diff --git a/Bindings/drm/imx/hdmi.txt b/Bindings/drm/imx/hdmi.txt
new file mode 100644
index 000000000000..1b756cf9afb0
--- /dev/null
+++ b/Bindings/drm/imx/hdmi.txt
@@ -0,0 +1,58 @@
+Device-Tree bindings for HDMI Transmitter
+
+HDMI Transmitter
+================
+
+The HDMI Transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+with accompanying PHY IP.
+
+Required properties:
+ - #address-cells : should be <1>
+ - #size-cells : should be <0>
+ - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
+ - gpr : should be <&gpr>.
+   The phandle points to the iomuxc-gpr region containing the HDMI
+   multiplexer control register.
+ - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described
+   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
+   Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+ - port@[0-4]: Up to four port nodes with endpoint definitions as defined in
+   Documentation/devicetree/bindings/media/video-interfaces.txt,
+   corresponding to the four inputs to the HDMI multiplexer.
+
+Optional properties:
+ - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+
+example:
+
+	gpr: iomuxc-gpr@020e0000 {
+		/* ... */
+	};
+
+        hdmi: hdmi@0120000 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "fsl,imx6q-hdmi";
+                reg = <0x00120000 0x9000>;
+                interrupts = <0 115 0x04>;
+                gpr = <&gpr>;
+                clocks = <&clks 123>, <&clks 124>;
+                clock-names = "iahb", "isfr";
+                ddc-i2c-bus = <&i2c2>;
+
+                port@0 {
+                        reg = <0>;
+
+                        hdmi_mux_0: endpoint {
+                                remote-endpoint = <&ipu1_di0_hdmi>;
+                        };
+                };
+
+                port@1 {
+                        reg = <1>;
+
+                        hdmi_mux_1: endpoint {
+                                remote-endpoint = <&ipu1_di1_hdmi>;
+                        };
+                };
+        };
diff --git a/Bindings/drm/imx/ldb.txt b/Bindings/drm/imx/ldb.txt
new file mode 100644
index 000000000000..443bcb6134d5
--- /dev/null
+++ b/Bindings/drm/imx/ldb.txt
@@ -0,0 +1,122 @@
+Device-Tree bindings for LVDS Display Bridge (ldb)
+
+LVDS Display Bridge
+===================
+
+The LVDS Display Bridge device tree node contains up to two lvds-channel
+nodes describing each of the two LVDS encoder channels of the bridge.
+
+Required properties:
+ - #address-cells : should be <1>
+ - #size-cells : should be <0>
+ - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
+                Both LDB versions are similar, but i.MX6 has an additional
+                multiplexer in the front to select any of the four IPU display
+                interfaces as input for each LVDS channel.
+ - gpr : should be <&gpr> on i.MX53 and i.MX6q.
+         The phandle points to the iomuxc-gpr region containing the LVDS
+         control register.
+- clocks, clock-names : phandles to the LDB divider and selector clocks and to
+                        the display interface selector clocks, as described in
+                        Documentation/devicetree/bindings/clock/clock-bindings.txt
+        The following clocks are expected on i.MX53:
+                "di0_pll" - LDB LVDS channel 0 mux
+                "di1_pll" - LDB LVDS channel 1 mux
+                "di0" - LDB LVDS channel 0 gate
+                "di1" - LDB LVDS channel 1 gate
+                "di0_sel" - IPU1 DI0 mux
+                "di1_sel" - IPU1 DI1 mux
+        On i.MX6q the following additional clocks are needed:
+                "di2_sel" - IPU2 DI0 mux
+                "di3_sel" - IPU2 DI1 mux
+        The needed clock numbers for each are documented in
+        Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
+        Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+
+Optional properties:
+ - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
+ - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53,
+               not used on i.MX6q
+ - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should
+   be configured - one input will be distributed on both outputs in dual
+   channel mode
+
+LVDS Channel
+============
+
+Each LVDS Channel has to contain a display-timings node that describes the
+video timings for the connected LVDS display. For detailed information, also
+have a look at Documentation/devicetree/bindings/video/display-timing.txt.
+
+Required properties:
+ - reg : should be <0> or <1>
+ - fsl,data-mapping : should be "spwg" or "jeida"
+                      This describes how the color bits are laid out in the
+                      serialized LVDS signal.
+ - fsl,data-width : should be <18> or <24>
+ - port: A port node with endpoint definitions as defined in
+   Documentation/devicetree/bindings/media/video-interfaces.txt.
+   On i.MX5, the internal two-input-multiplexer is used.
+   Due to hardware limitations, only one port (port@[0,1])
+   can be used for each channel (lvds-channel@[0,1], respectively)
+   On i.MX6, there should be four ports (port@[0-3]) that correspond
+   to the four LVDS multiplexer inputs.
+
+example:
+
+gpr: iomuxc-gpr@53fa8000 {
+	/* ... */
+};
+
+ldb: ldb@53fa8008 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx53-ldb";
+	gpr = <&gpr>;
+	clocks = <&clks 122>, <&clks 120>,
+		 <&clks 115>, <&clks 116>,
+		 <&clks 123>, <&clks 85>;
+	clock-names = "di0_pll", "di1_pll",
+		      "di0_sel", "di1_sel",
+		      "di0", "di1";
+
+	lvds-channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		display-timings {
+			/* ... */
+		};
+
+		port@0 {
+			reg = <0>;
+
+			lvds0_in: endpoint {
+				remote-endpoint = <&ipu_di0_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		display-timings {
+			/* ... */
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lvds1_in: endpoint {
+				remote-endpoint = <&ipu_di1_lvds1>;
+			};
+		};
+	};
+};
diff --git a/Bindings/drm/msm/hdmi.txt b/Bindings/drm/msm/hdmi.txt
index aca917fe2ba7..a29a55f3d937 100644
--- a/Bindings/drm/msm/hdmi.txt
+++ b/Bindings/drm/msm/hdmi.txt
@@ -2,6 +2,8 @@ Qualcomm adreno/snapdragon hdmi output
 
 Required properties:
 - compatible: one of the following
+   * "qcom,hdmi-tx-8084"
+   * "qcom,hdmi-tx-8074"
    * "qcom,hdmi-tx-8660"
    * "qcom,hdmi-tx-8960"
 - reg: Physical base address and length of the controller's registers
diff --git a/Bindings/drm/tilcdc/panel.txt b/Bindings/drm/tilcdc/panel.txt
index 9301c330d1a6..4ab9e2300907 100644
--- a/Bindings/drm/tilcdc/panel.txt
+++ b/Bindings/drm/tilcdc/panel.txt
@@ -18,6 +18,10 @@ Required properties:
    Documentation/devicetree/bindings/video/display-timing.txt for display
    timing binding details.
 
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+- enable-gpios: GPIO pin to enable or disable the panel
+
 Recommended properties:
  - pinctrl-names, pinctrl-0: the pincontrol settings to configure
    muxing properly for pins that connect to TFP410 device
@@ -29,6 +33,9 @@ Example:
 		compatible = "ti,tilcdc,panel";
 		pinctrl-names = "default";
 		pinctrl-0 = <&bone_lcd3_cape_lcd_pins>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio3 19 0>;
+
 		panel-info {
 			ac-bias           = <255>;
 			ac-bias-intrpt    = <0>;
diff --git a/Bindings/extcon/extcon-rt8973a.txt b/Bindings/extcon/extcon-rt8973a.txt
new file mode 100644
index 000000000000..6dede7d11532
--- /dev/null
+++ b/Bindings/extcon/extcon-rt8973a.txt
@@ -0,0 +1,25 @@
+
+* Richtek RT8973A - Micro USB Switch device
+
+The Richtek RT8973A is Micro USB Switch with OVP and I2C interface. The RT8973A
+is a USB port accessory detector and switch that is optimized to protect low
+voltage system from abnormal high input voltage (up to 28V) and supports high
+speed USB operation. Also, RT8973A support 'auto-configuration' mode.
+If auto-configuration mode is enabled, RT8973A would control internal h/w patch
+for USB D-/D+ switching.
+
+Required properties:
+- compatible: Should be "richtek,rt8973a-muic"
+- reg: Specifies the I2C slave address of the MUIC block. It should be 0x14
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the interrupts from rt8973a are delivered to.
+- interrupts: Interrupt specifiers for detection interrupt sources.
+
+Example:
+
+	rt8973a@14 {
+		compatible = "richtek,rt8973a-muic";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		reg = <0x14>;
+	};
diff --git a/Bindings/fpga/altera-socfpga-fpga-mgr.txt b/Bindings/fpga/altera-socfpga-fpga-mgr.txt
new file mode 100644
index 000000000000..9b027a615486
--- /dev/null
+++ b/Bindings/fpga/altera-socfpga-fpga-mgr.txt
@@ -0,0 +1,17 @@
+Altera SOCFPGA FPGA Manager
+
+Required properties:
+- compatible : should contain "altr,socfpga-fpga-mgr"
+- reg        : base address and size for memory mapped io.
+               - The first index is for FPGA manager register access.
+               - The second index is for writing FPGA configuration data.
+- interrupts : interrupt for the FPGA Manager device.
+
+Example:
+
+	hps_0_fpgamgr: fpgamgr@0xff706000 {
+		compatible = "altr,socfpga-fpga-mgr";
+		reg = <0xFF706000 0x1000
+		       0xFFB90000 0x1000>;
+		interrupts = <0 175 4>;
+	};
diff --git a/Bindings/fuse/nvidia,tegra20-fuse.txt b/Bindings/fuse/nvidia,tegra20-fuse.txt
index d8c98c7614d0..23e1d3194174 100644
--- a/Bindings/fuse/nvidia,tegra20-fuse.txt
+++ b/Bindings/fuse/nvidia,tegra20-fuse.txt
@@ -1,11 +1,11 @@
 NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
 
 Required properties:
-- compatible : should be:
-	"nvidia,tegra20-efuse"
-	"nvidia,tegra30-efuse"
-	"nvidia,tegra114-efuse"
-	"nvidia,tegra124-efuse"
+- compatible : For Tegra20, must contain "nvidia,tegra20-efuse".  For Tegra30,
+  must contain "nvidia,tegra30-efuse".  For Tegra114, must contain
+  "nvidia,tegra114-efuse".  For Tegra124, must contain "nvidia,tegra124-efuse".
+  Otherwise, must contain "nvidia,<chip>-efuse", plus one of the above, where
+  <chip> is tegra132.
   Details:
   nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
 	due to a hardware bug. Tegra20 also lacks certain information which is
diff --git a/Bindings/gpio/fujitsu,mb86s70-gpio.txt b/Bindings/gpio/fujitsu,mb86s70-gpio.txt
new file mode 100644
index 000000000000..bef353f370d8
--- /dev/null
+++ b/Bindings/gpio/fujitsu,mb86s70-gpio.txt
@@ -0,0 +1,20 @@
+Fujitsu MB86S7x GPIO Controller
+-------------------------------
+
+Required properties:
+- compatible: Should be "fujitsu,mb86s70-gpio"
+- reg: Base address and length of register space
+- clocks: Specify the clock
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be <2>. The first cell is the pin number and the
+  second cell is used to specify optional parameters:
+   - bit 0 specifies polarity (0 for normal, 1 for inverted).
+
+Examples:
+	gpio0: gpio@31000000 {
+		compatible = "fujitsu,mb86s70-gpio";
+		reg = <0 0x31000000 0x10000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		clocks = <&clk 0 2 1>;
+	};
diff --git a/Bindings/gpio/gpio-74xx-mmio.txt b/Bindings/gpio/gpio-74xx-mmio.txt
new file mode 100644
index 000000000000..7bb1a9d60133
--- /dev/null
+++ b/Bindings/gpio/gpio-74xx-mmio.txt
@@ -0,0 +1,30 @@
+* 74XX MMIO GPIO driver
+
+Required properties:
+- compatible: Should contain one of the following:
+   "ti,741g125": for 741G125 (1-bit Input),
+   "ti,741g174": for 741G74 (1-bit Output),
+   "ti,742g125": for 742G125 (2-bit Input),
+   "ti,7474"   : for 7474 (2-bit Output),
+   "ti,74125"  : for 74125 (4-bit Input),
+   "ti,74175"  : for 74175 (4-bit Output),
+   "ti,74365"  : for 74365 (6-bit Input),
+   "ti,74174"  : for 74174 (6-bit Output),
+   "ti,74244"  : for 74244 (8-bit Input),
+   "ti,74273"  : for 74273 (8-bit Output),
+   "ti,741624" : for 741624 (16-bit Input),
+   "ti,7416374": for 7416374 (16-bit Output).
+- reg: Physical base address and length where IC resides.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be two. The first cell is the pin number and
+   the second cell is used to specify the GPIO polarity:
+    0 = Active High,
+    1 = Active Low.
+
+Example:
+	ctrl: gpio@30008004 {
+		compatible = "ti,74174";
+		reg = <0x30008004 0x1>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Bindings/gpio/gpio-dsp-keystone.txt b/Bindings/gpio/gpio-dsp-keystone.txt
new file mode 100644
index 000000000000..6c7e6c7302f5
--- /dev/null
+++ b/Bindings/gpio/gpio-dsp-keystone.txt
@@ -0,0 +1,39 @@
+Keystone 2 DSP GPIO controller bindings
+
+HOST OS userland running on ARM can send interrupts to DSP cores using
+the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core.
+This is one of the component used by the IPC mechanism used on Keystone SOCs.
+
+For example TCI6638K2K SoC has 8 DSP GPIO controllers:
+ - 8 for C66x CorePacx CPUs 0-7
+
+Keystone 2 DSP GPIO controller has specific features:
+- each GPIO can be configured only as output pin;
+- setting GPIO value to 1 causes IRQ generation on target DSP core;
+- reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still
+  pending.
+
+Required Properties:
+- compatible: should be "ti,keystone-dsp-gpio"
+- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to
+  access device state control registers and the offset of device's specific
+  registers within device state control registers range.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be 2.
+
+Please refer to gpio.txt in this directory for details of the common GPIO
+bindings used by client devices.
+
+Example:
+	dspgpio0: keystone_dsp_gpio@02620240 {
+		compatible = "ti,keystone-dsp-gpio";
+		ti,syscon-dev = <&devctrl 0x240>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	dsp0: dsp0 {
+		compatible = "linux,rproc-user";
+		...
+		kick-gpio = <&dspgpio0 27>;
+	};
diff --git a/Bindings/gpio/gpio-max732x.txt b/Bindings/gpio/gpio-max732x.txt
new file mode 100644
index 000000000000..5fdc843b4542
--- /dev/null
+++ b/Bindings/gpio/gpio-max732x.txt
@@ -0,0 +1,59 @@
+* MAX732x-compatible I/O expanders
+
+Required properties:
+  - compatible: Should be one of the following:
+    - "maxim,max7319": For the Maxim MAX7319
+    - "maxim,max7320": For the Maxim MAX7320
+    - "maxim,max7321": For the Maxim MAX7321
+    - "maxim,max7322": For the Maxim MAX7322
+    - "maxim,max7323": For the Maxim MAX7323
+    - "maxim,max7324": For the Maxim MAX7324
+    - "maxim,max7325": For the Maxim MAX7325
+    - "maxim,max7326": For the Maxim MAX7326
+    - "maxim,max7327": For the Maxim MAX7327
+  - reg: I2C slave address for this device.
+  - gpio-controller: Marks the device node as a GPIO controller.
+  - #gpio-cells: Should be 2.
+    - first cell is the GPIO number
+    - second cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+      Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+
+Optional properties:
+
+  The I/O expander can detect input state changes, and thus optionally act as
+  an interrupt controller. When the expander interrupt line is connected all the
+  following properties must be set. For more information please see the
+  interrupt controller device tree bindings documentation available at
+  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
+
+  - interrupt-controller: Identifies the node as an interrupt controller.
+  - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
+    - first cell is the pin number
+    - second cell is used to specify flags
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifier for the controllers interrupt.
+
+Please refer to gpio.txt in this directory for details of the common GPIO
+bindings used by client devices.
+
+Example 1. MAX7325 with interrupt support enabled (CONFIG_GPIO_MAX732X_IRQ=y):
+
+	expander: max7325@6d {
+		compatible = "maxim,max7325";
+		reg = <0x6d>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+Example 2. MAX7325 with interrupt support disabled (CONFIG_GPIO_MAX732X_IRQ=n):
+
+	expander: max7325@6d {
+		compatible = "maxim,max7325";
+		reg = <0x6d>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Bindings/gpio/gpio-mcp23s08.txt b/Bindings/gpio/gpio-mcp23s08.txt
index c306a2d0f2b1..f3332b9a8ed4 100644
--- a/Bindings/gpio/gpio-mcp23s08.txt
+++ b/Bindings/gpio/gpio-mcp23s08.txt
@@ -57,6 +57,8 @@ Optional device specific properties:
         occurred on. If it is not set, the interrupt are only generated for the
         bank they belong to.
         On devices with only one interrupt output this property is useless.
+- microchip,irq-active-high: Sets the INTPOL flag in the IOCON register. This
+        configures the IRQ output polarity as active high.
 
 Example I2C (with interrupt):
 gpiom1: gpio@20 {
diff --git a/Bindings/gpio/gpio-pca953x.txt b/Bindings/gpio/gpio-pca953x.txt
new file mode 100644
index 000000000000..b9a42f294dd0
--- /dev/null
+++ b/Bindings/gpio/gpio-pca953x.txt
@@ -0,0 +1,39 @@
+* NXP PCA953x I2C GPIO multiplexer
+
+Required properties:
+ - compatible: Has to contain one of the following:
+	nxp,pca9505
+	nxp,pca9534
+	nxp,pca9535
+	nxp,pca9536
+	nxp,pca9537
+	nxp,pca9538
+	nxp,pca9539
+	nxp,pca9554
+	nxp,pca9555
+	nxp,pca9556
+	nxp,pca9557
+	nxp,pca9574
+	nxp,pca9575
+	nxp,pca9698
+	maxim,max7310
+	maxim,max7312
+	maxim,max7313
+	maxim,max7315
+	ti,pca6107
+	ti,tca6408
+	ti,tca6416
+	ti,tca6424
+	exar,xra1202
+
+Example:
+
+
+	gpio@20 {
+		compatible = "nxp,pca9505";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9505>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+	};
diff --git a/Bindings/gpio/gpio-pcf857x.txt b/Bindings/gpio/gpio-pcf857x.txt
index d63194a2c848..ada4e2973323 100644
--- a/Bindings/gpio/gpio-pcf857x.txt
+++ b/Bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
   - lines-initial-states: Bitmask that specifies the initial state of each
   line. When a bit is set to zero, the corresponding line will be initialized to
   the input (pulled-up) state. When the  bit is set to one, the line will be
-  initialized the the low-level output state. If the property is not specified
+  initialized the low-level output state. If the property is not specified
   all lines will be initialized to the input state.
 
   The I/O expander can detect input state changes, and thus optionally act as
diff --git a/Bindings/gpio/gpio-restart.txt b/Bindings/gpio/gpio-restart.txt
new file mode 100644
index 000000000000..af3701bc15c4
--- /dev/null
+++ b/Bindings/gpio/gpio-restart.txt
@@ -0,0 +1,54 @@
+Drive a GPIO line that can be used to restart the system from a restart
+handler.
+
+This binding supports level and edge triggered reset.  At driver load
+time, the driver will request the given gpio line and install a restart
+handler. If the optional properties 'open-source' is not found, the GPIO line
+will be driven in the inactive state.  Otherwise its not driven until
+the restart is initiated.
+
+When the system is restarted, the restart handler will be invoked in
+priority order.  The gpio is configured as an output, and driven active,
+triggering a level triggered reset condition. This will also cause an
+inactive->active edge condition, triggering positive edge triggered
+reset. After a delay specified by active-delay, the GPIO is set to
+inactive, thus causing an active->inactive edge, triggering negative edge
+triggered reset. After a delay specified by inactive-delay, the GPIO
+is driven active again.  After a delay specified by wait-delay, the
+restart handler completes allowing other restart handlers to be attempted.
+
+Required properties:
+- compatible : should be "gpio-restart".
+- gpios : The GPIO to set high/low, see "gpios property" in
+  Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be
+  low to reset the board set it to "Active Low", otherwise set
+  gpio to "Active High".
+
+Optional properties:
+- open-source : Treat the GPIO as being open source and defer driving
+  it to when the restart is initiated.  If this optional property is not
+  specified, the GPIO is initialized as an output in its inactive state.
+- priority : A priority ranging from 0 to 255 (default 128) according to
+  the following guidelines:
+	0:	Restart handler of last resort, with limited restart
+		capabilities
+	128:	Default restart handler; use if no other restart handler is
+		expected to be available, and/or if restart functionality is
+		sufficient to restart the entire system
+	255:	Highest priority restart handler, will preempt all other
+		restart handlers
+- active-delay: Delay (default 100) to wait after driving gpio active [ms]
+- inactive-delay: Delay (default 100) to wait after driving gpio inactive [ms]
+- wait-delay: Delay (default 3000) to wait after completing restart
+  sequence [ms]
+
+Examples:
+
+gpio-restart {
+	compatible = "gpio-restart";
+	gpios = <&gpio 4 0>;
+	priority = <128>;
+	active-delay = <100>;
+	inactive-delay = <100>;
+	wait-delay = <3000>;
+};
diff --git a/Bindings/gpio/gpio-sx150x.txt b/Bindings/gpio/gpio-sx150x.txt
new file mode 100644
index 000000000000..ba2bb84eeac3
--- /dev/null
+++ b/Bindings/gpio/gpio-sx150x.txt
@@ -0,0 +1,40 @@
+SEMTECH SX150x GPIO expander bindings
+
+
+Required properties:
+
+- compatible: should be "semtech,sx1506q",
+			"semtech,sx1508q",
+			"semtech,sx1509q".
+
+- reg: The I2C slave address for this device.
+
+- interrupt-parent: phandle of the parent interrupt controller.
+
+- interrupts: Interrupt specifier for the controllers interrupt.
+
+- #gpio-cells: Should be 2. The first cell is the GPIO number and the
+		second cell is used to specify optional parameters:
+		bit 0: polarity (0: normal, 1: inverted)
+
+- gpio-controller: Marks the device as a GPIO controller.
+
+- interrupt-controller: Marks the device as a interrupt controller.
+
+The GPIO expander can optionally be used as an interrupt controller, in
+which case it uses the default two cell specifier as described in
+Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
+
+Example:
+
+	i2c_gpio_expander@20{
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		compatible = "semtech,sx1506q";
+		reg = <0x20>;
+		interrupt-parent = <&gpio_1>;
+		interrupts = <16 0>;
+
+		gpio-controller;
+		interrupt-controller;
+	};
diff --git a/Bindings/gpio/gpio-vf610.txt b/Bindings/gpio/gpio-vf610.txt
new file mode 100644
index 000000000000..436cc99c6598
--- /dev/null
+++ b/Bindings/gpio/gpio-vf610.txt
@@ -0,0 +1,55 @@
+* Freescale VF610 PORT/GPIO module
+
+The Freescale PORT/GPIO modules are two adjacent modules providing GPIO
+functionality. Each pair serves 32 GPIOs. The VF610 has 5 instances of
+each, and each PORT module has its own interrupt.
+
+Required properties for GPIO node:
+- compatible : Should be "fsl,<soc>-gpio", currently "fsl,vf610-gpio"
+- reg : The first reg tuple represents the PORT module, the second tuple
+  the GPIO module.
+- interrupts : Should be the port interrupt shared by all 32 pins.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells : Should be two. The first cell is the pin number and
+  the second cell is used to specify the gpio polarity:
+      0 = active high
+      1 = active low
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells : Should be 2.  The first cell is the GPIO number.
+  The second cell bits[3:0] is used to specify trigger type and level flags:
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      4 = active high level-sensitive.
+      8 = active low level-sensitive.
+
+Note: Each GPIO port should have an alias correctly numbered in "aliases"
+node.
+
+Examples:
+
+aliases {
+	gpio0 = &gpio1;
+	gpio1 = &gpio2;
+};
+
+gpio1: gpio@40049000 {
+	compatible = "fsl,vf610-gpio";
+	reg = <0x40049000 0x1000 0x400ff000 0x40>;
+	interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	gpio-ranges = <&iomuxc 0 0 32>;
+};
+
+gpio2: gpio@4004a000 {
+	compatible = "fsl,vf610-gpio";
+	reg = <0x4004a000 0x1000 0x400ff040 0x40>;
+	interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+	gpio-controller;
+	#gpio-cells = <2>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	gpio-ranges = <&iomuxc 0 32 32>;
+};
diff --git a/Bindings/gpio/gpio-xgene-sb.txt b/Bindings/gpio/gpio-xgene-sb.txt
new file mode 100644
index 000000000000..dae130060537
--- /dev/null
+++ b/Bindings/gpio/gpio-xgene-sb.txt
@@ -0,0 +1,32 @@
+APM X-Gene Standby GPIO controller bindings
+
+This is a gpio controller in the standby domain.
+
+There are 20 GPIO pins from 0..21. There is no GPIO_DS14 or GPIO_DS15,
+only GPIO_DS8..GPIO_DS13 support interrupts. The IRQ mapping
+is currently 1-to-1 on interrupts 0x28 thru 0x2d.
+
+Required properties:
+- compatible: "apm,xgene-gpio-sb" for the X-Gene Standby GPIO controller
+- reg: Physical base address and size of the controller's registers
+- #gpio-cells: Should be two.
+	- first cell is the pin number
+	- second cell is used to specify the gpio polarity:
+		0 = active high
+		1 = active low
+- gpio-controller: Marks the device node as a GPIO controller.
+- interrupts: Shall contain exactly 6 interrupts.
+
+Example:
+	sbgpio: sbgpio@17001000 {
+		compatible = "apm,xgene-gpio-sb";
+		reg = <0x0 0x17001000 0x0 0x400>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupts = 	<0x0 0x28 0x1>,
+				<0x0 0x29 0x1>,
+				<0x0 0x2a 0x1>,
+				<0x0 0x2b 0x1>,
+				<0x0 0x2c 0x1>,
+				<0x0 0x2d 0x1>;
+	};
diff --git a/Bindings/gpio/gpio-xgene.txt b/Bindings/gpio/gpio-xgene.txt
new file mode 100644
index 000000000000..86dbb05e7758
--- /dev/null
+++ b/Bindings/gpio/gpio-xgene.txt
@@ -0,0 +1,22 @@
+APM X-Gene SoC GPIO controller bindings
+
+This is a gpio controller that is part of the flash controller.
+This gpio controller controls a total of 48 gpios.
+
+Required properties:
+- compatible: "apm,xgene-gpio" for X-Gene GPIO controller
+- reg: Physical base address and size of the controller's registers
+- #gpio-cells: Should be two.
+	- first cell is the pin number
+	- second cell is used to specify the gpio polarity:
+		0 = active high
+		1 = active low
+- gpio-controller: Marks the device node as a GPIO controller.
+
+Example:
+	gpio0: gpio0@1701c000 {
+		compatible = "apm,xgene-gpio";
+		reg = <0x0 0x1701c000 0x0 0x40>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
diff --git a/Bindings/gpio/gpio.txt b/Bindings/gpio/gpio.txt
index 3fb8f53071b8..f7a158d85862 100644
--- a/Bindings/gpio/gpio.txt
+++ b/Bindings/gpio/gpio.txt
@@ -13,13 +13,22 @@ properties, each containing a 'gpio-list':
 	gpio-specifier : Array of #gpio-cells specifying specific gpio
 			 (controller specific)
 
-GPIO properties should be named "[<name>-]gpios". The exact
-meaning of each gpios property must be documented in the device tree
-binding for each device.
+GPIO properties should be named "[<name>-]gpios", with <name> being the purpose
+of this GPIO for the device. While a non-existent <name> is considered valid
+for compatibility reasons (resolving to the "gpios" property), it is not allowed
+for new bindings.
 
-For example, the following could be used to describe GPIO pins used
-as chip select lines; with chip selects 0, 1 and 3 populated, and chip
-select 2 left empty:
+GPIO properties can contain one or more GPIO phandles, but only in exceptional
+cases should they contain more than one. If your device uses several GPIOs with
+distinct functions, reference each of them under its own property, giving it a
+meaningful name. The only case where an array of GPIOs is accepted is when
+several GPIOs serve the same function (e.g. a parallel data line).
+
+The exact purpose of each gpios property must be documented in the device tree
+binding of the device.
+
+The following example could be used to describe GPIO pins used as device enable
+and bit-banged data signals:
 
 	gpio1: gpio1 {
 		gpio-controller
@@ -30,10 +39,12 @@ select 2 left empty:
 		 #gpio-cells = <1>;
 	};
 	[...]
-	 chipsel-gpios = <&gpio1 12 0>,
-			 <&gpio1 13 0>,
-			 <0>, /* holes are permitted, means no GPIO 2 */
-			 <&gpio2 2>;
+
+	enable-gpios = <&gpio2 2>;
+	data-gpios = <&gpio1 12 0>,
+		     <&gpio1 13 0>,
+		     <&gpio1 14 0>,
+		     <&gpio1 15 0>;
 
 Note that gpio-specifier length is controller dependent.  In the
 above example, &gpio1 uses 2 cells to specify a gpio, while &gpio2
@@ -42,22 +53,24 @@ only uses one.
 gpio-specifier may encode: bank, pin position inside the bank,
 whether pin is open-drain and whether pin is logically inverted.
 Exact meaning of each specifier cell is controller specific, and must
-be documented in the device tree binding for the device.
+be documented in the device tree binding for the device. Use the macros
+defined in include/dt-bindings/gpio/gpio.h whenever possible:
 
 Example of a node using GPIOs:
 
 	node {
-		gpios = <&qe_pio_e 18 0>;
+		enable-gpios = <&qe_pio_e 18 GPIO_ACTIVE_HIGH>;
 	};
 
-In this example gpio-specifier is "18 0" and encodes GPIO pin number,
-and GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+GPIO_ACTIVE_HIGH is 0, so in this example gpio-specifier is "18 0" and encodes
+GPIO pin number, and GPIO flags as accepted by the "qe_pio_e" gpio-controller.
 
 1.1) GPIO specifier best practices
 ----------------------------------
 
 A gpio-specifier should contain a flag indicating the GPIO polarity; active-
-high or active-low. If it does, the follow best practices should be followed:
+high or active-low. If it does, the following best practices should be
+followed:
 
 The gpio-specifier's polarity flag should represent the physical level at the
 GPIO controller that achieves (or represents, for inputs) a logically asserted
@@ -135,7 +148,7 @@ contains information structures as follows:
 	numeric-gpio-range ::=
 			<pinctrl-phandle> <gpio-base> <pinctrl-base> <count>
 	named-gpio-range ::= <pinctrl-phandle> <gpio-base> '<0 0>'
-	gpio-phandle : phandle to pin controller node.
+	pinctrl-phandle : phandle to pin controller node
 	gpio-base : Base GPIO ID in the GPIO controller
 	pinctrl-base : Base pinctrl pin ID in the pin controller
 	count : The number of GPIOs/pins in this range
diff --git a/Bindings/gpio/mrvl-gpio.txt b/Bindings/gpio/mrvl-gpio.txt
index 66416261e14d..67a2e4e414a5 100644
--- a/Bindings/gpio/mrvl-gpio.txt
+++ b/Bindings/gpio/mrvl-gpio.txt
@@ -3,8 +3,8 @@
 Required properties:
 - compatible : Should be "intel,pxa25x-gpio", "intel,pxa26x-gpio",
 		"intel,pxa27x-gpio", "intel,pxa3xx-gpio",
-		"marvell,pxa93x-gpio", "marvell,mmp-gpio" or
-		"marvell,mmp2-gpio".
+		"marvell,pxa93x-gpio", "marvell,mmp-gpio",
+		"marvell,mmp2-gpio" or marvell,pxa1928-gpio.
 - reg : Address and length of the register set for the device
 - interrupts : Should be the port interrupt shared by all gpio pins.
   There're three gpio interrupts in arch-pxa, and they're gpio0,
@@ -19,7 +19,7 @@ Required properties:
 - gpio-controller : Marks the device node as a gpio controller.
 - #gpio-cells : Should be one.  It is the pin number.
 
-Example:
+Example for a MMP platform:
 
 	gpio: gpio@d4019000 {
 		compatible = "marvell,mmp-gpio";
@@ -32,6 +32,19 @@ Example:
 		#interrupt-cells = <1>;
       };
 
+Example for a PXA3xx platform:
+
+	gpio: gpio@40e00000 {
+		compatible = "intel,pxa3xx-gpio";
+		reg = <0x40e00000 0x10000>;
+		interrupt-names = "gpio0", "gpio1", "gpio_mux";
+		interrupts = <8 9 10>;
+		gpio-controller;
+		#gpio-cells = <0x2>;
+		interrupt-controller;
+		#interrupt-cells = <0x2>;
+	};
+
 * Marvell Orion GPIO Controller
 
 Required properties:
diff --git a/Bindings/gpio/pl061-gpio.txt b/Bindings/gpio/pl061-gpio.txt
index a2c416bcbccc..89058d375b7c 100644
--- a/Bindings/gpio/pl061-gpio.txt
+++ b/Bindings/gpio/pl061-gpio.txt
@@ -7,4 +7,4 @@ Required properties:
   - bit 0 specifies polarity (0 for normal, 1 for inverted)
 - gpio-controller : Marks the device node as a GPIO controller.
 - interrupts : Interrupt mapping for GPIO IRQ.
-
+- gpio-ranges : Interaction with the PINCTRL subsystem.
diff --git a/Bindings/gpio/renesas,gpio-rcar.txt b/Bindings/gpio/renesas,gpio-rcar.txt
index 941a26aa4322..38fb86f28ba2 100644
--- a/Bindings/gpio/renesas,gpio-rcar.txt
+++ b/Bindings/gpio/renesas,gpio-rcar.txt
@@ -6,7 +6,9 @@ Required Properties:
     - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller.
     - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
     - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
-    - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2) compatible GPIO controller.
+    - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2-W) compatible GPIO controller.
+    - "renesas,gpio-r8a7793": for R8A7793 (R-Car M2-N) compatible GPIO controller.
+    - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller.
     - "renesas,gpio-rcar": for generic R-Car GPIO controller.
 
   - reg: Base address and length of each memory resource used by the GPIO
diff --git a/Bindings/gpu/nvidia,tegra20-host1x.txt b/Bindings/gpu/nvidia,tegra20-host1x.txt
index b48f4ef31d93..009f4bfa1590 100644
--- a/Bindings/gpu/nvidia,tegra20-host1x.txt
+++ b/Bindings/gpu/nvidia,tegra20-host1x.txt
@@ -191,11 +191,15 @@ of the following host1x client modules:
   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
   - nvidia,edid: supplies a binary EDID blob
   - nvidia,panel: phandle of a display panel
+  - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang
+    up with in order to support up to 8 data lanes
 
 - sor: serial output resource
 
   Required properties:
-  - compatible: "nvidia,tegra124-sor"
+  - compatible: For Tegra124, must contain "nvidia,tegra124-sor".  Otherwise,
+    must contain '"nvidia,<chip>-sor", "nvidia,tegra124-sor"', where <chip>
+    is tegra132.
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain an entry for each entry in clock-names.
@@ -220,7 +224,9 @@ of the following host1x client modules:
   - nvidia,dpaux: phandle to a DispayPort AUX interface
 
 - dpaux: DisplayPort AUX interface
-  - compatible: "nvidia,tegra124-dpaux"
+  - compatible: For Tegra124, must contain "nvidia,tegra124-dpaux".  Otherwise,
+    must contain '"nvidia,<chip>-dpaux", "nvidia,tegra124-dpaux"', where
+    <chip> is tegra132.
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain an entry for each entry in clock-names.
diff --git a/Bindings/gpu/st,stih4xx.txt b/Bindings/gpu/st,stih4xx.txt
index 2d150c311a05..6b1d75f1a529 100644
--- a/Bindings/gpu/st,stih4xx.txt
+++ b/Bindings/gpu/st,stih4xx.txt
@@ -68,7 +68,7 @@ STMicroelectronics stih4xx platforms
     number of clocks may depend of the SoC type.
   - clock-names: names of the clocks listed in clocks property in the same
     order.
-  - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not.
+  - ddc: phandle of an I2C controller used for DDC EDID probing
 
 sti-hda:
   Required properties:
@@ -83,6 +83,38 @@ sti-hda:
   - clock-names: names of the clocks listed in clocks property in the same
     order.
 
+sti-dvo:
+  Required properties:
+  must be a child of sti-tvout
+  - compatible: "st,stih<chip>-dvo"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - pinctrl-0: pin control handle
+  - pinctrl-name: names of the pin control to use
+  - sti,panel: phandle of the panel connected to the DVO output
+
+sti-hqvdp:
+  must be a child of sti-display-subsystem
+  Required properties:
+  - compatible: "st,stih<chip>-hqvdp"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - resets: resets to be used by the device
+    See ../reset/reset.txt for details.
+  - reset-names: names of the resets listed in resets property in the same
+    order.
+  - st,vtg: phandle on vtg main device node.
+
 Example:
 
 / {
@@ -173,7 +205,6 @@ Example:
 				interrupt-names	= "irq";
 				clock-names	= "pix", "tmds", "phy", "audio";
 				clocks          = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>;
-				hdmi,hpd-gpio	= <&PIO2 5>;
 			};
 
 			sti-hda@fe85a000 {
@@ -183,7 +214,30 @@ Example:
 				clock-names	= "pix", "hddac";
 				clocks          = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
 			};
+
+			sti-dvo@8d00400 {
+				compatible	= "st,stih407-dvo";
+				reg		= <0x8d00400 0x200>;
+				reg-names	= "dvo-reg";
+				clock-names	= "dvo_pix", "dvo",
+						  "main_parent", "aux_parent";
+				clocks		= <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
+						  <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
+				pinctrl-names	= "default";
+				pinctrl-0	= <&pinctrl_dvo>;
+				sti,panel	= <&panel_dvo>;
+			};
 		};
+
+		sti-hqvdp@9c000000 {
+				compatible	= "st,stih407-hqvdp";
+				reg		= <0x9C00000 0x100000>;
+				clock-names	= "hqvdp", "pix_main";
+				clocks		= <&clk_s_c0_flexgen CLK_MAIN_DISP>, <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>;
+				reset-names     = "hqvdp";
+				resets          = <&softreset STIH407_HDQVDP_SOFTRESET>;
+				st,vtg		= <&vtg_main>;
+			};
 	};
 	...
 };
diff --git a/Bindings/graph.txt b/Bindings/graph.txt
index 1a69c078adf2..fcb1c6a4787b 100644
--- a/Bindings/graph.txt
+++ b/Bindings/graph.txt
@@ -19,7 +19,7 @@ type of the connections, they just map their existence. Specific properties
 may be described by specialized bindings depending on the type of connection.
 
 To see how this binding applies to video pipelines, for example, see
-Documentation/device-tree/bindings/media/video-interfaces.txt.
+Documentation/devicetree/bindings/media/video-interfaces.txt.
 Here the ports describe data interfaces, and the links between them are
 the connecting data buses. A single port with multiple connections can
 correspond to multiple devices being connected to the same physical bus.
diff --git a/Bindings/hwmon/ltc2978.txt b/Bindings/hwmon/ltc2978.txt
new file mode 100644
index 000000000000..ed2f09dc2483
--- /dev/null
+++ b/Bindings/hwmon/ltc2978.txt
@@ -0,0 +1,39 @@
+ltc2978
+
+Required properties:
+- compatible: should contain one of:
+  * "lltc,ltc2974"
+  * "lltc,ltc2977"
+  * "lltc,ltc2978"
+  * "lltc,ltc3880"
+  * "lltc,ltc3883"
+  * "lltc,ltm4676"
+- reg: I2C slave address
+
+Optional properties:
+- regulators: A node that houses a sub-node for each regulator controlled by
+  the device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+
+Valid names of regulators depend on number of supplies supported per device:
+  * ltc2974 : vout0 - vout3
+  * ltc2977 : vout0 - vout7
+  * ltc2978 : vout0 - vout7
+  * ltc3880 : vout0 - vout1
+  * ltc3883 : vout0
+  * ltm4676 : vout0 - vout1
+
+Example:
+ltc2978@5e {
+	compatible = "lltc,ltc2978";
+	reg = <0x5e>;
+	regulators {
+		vout0 {
+			regulator-name = "FPGA-2.5V";
+		};
+		vout2 {
+			regulator-name = "FPGA-1.5V";
+		};
+	};
+};
diff --git a/Bindings/hwmon/ntc_thermistor.txt b/Bindings/hwmon/ntc_thermistor.txt
index 2391e5c41999..fcca8e744f41 100644
--- a/Bindings/hwmon/ntc_thermistor.txt
+++ b/Bindings/hwmon/ntc_thermistor.txt
@@ -25,6 +25,9 @@ Requires node properties:
 - "io-channels"	Channel node of ADC to be used for
 		conversion.
 
+Optional node properties:
+- "#thermal-sensor-cells" Used to expose itself to thermal fw.
+
 Read more about iio bindings at
 	Documentation/devicetree/bindings/iio/iio-bindings.txt
 
diff --git a/Bindings/hwrng/atmel-trng.txt b/Bindings/hwrng/atmel-trng.txt
new file mode 100644
index 000000000000..4ac5aaa2d024
--- /dev/null
+++ b/Bindings/hwrng/atmel-trng.txt
@@ -0,0 +1,16 @@
+Atmel TRNG (True Random Number Generator) block
+
+Required properties:
+- compatible : Should be "atmel,at91sam9g45-trng"
+- reg : Offset and length of the register set of this block
+- interrupts : the interrupt number for the TRNG block
+- clocks: should contain the TRNG clk source
+
+Example:
+
+trng@fffcc000 {
+	compatible = "atmel,at91sam9g45-trng";
+	reg = <0xfffcc000 0x4000>;
+	interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+	clocks = <&trng_clk>;
+};
diff --git a/Bindings/i2c/brcm,iproc-i2c.txt b/Bindings/i2c/brcm,iproc-i2c.txt
new file mode 100644
index 000000000000..81f982ccca31
--- /dev/null
+++ b/Bindings/i2c/brcm,iproc-i2c.txt
@@ -0,0 +1,37 @@
+Broadcom iProc I2C controller
+
+Required properties:
+
+- compatible:
+    Must be "brcm,iproc-i2c"
+
+- reg:
+    Define the base and range of the I/O address space that contain the iProc
+    I2C controller registers
+
+- interrupts:
+    Should contain the I2C interrupt
+
+- clock-frequency:
+    This is the I2C bus clock. Need to be either 100000 or 400000
+
+- #address-cells:
+    Always 1 (for I2C addresses)
+
+- #size-cells:
+    Always 0
+
+Example:
+	i2c0: i2c@18008000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18008000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+		clock-frequency = <100000>;
+
+		codec: wm8750@1a {
+			compatible = "wlf,wm8750";
+			reg = <0x1a>;
+		};
+	};
diff --git a/Bindings/i2c/i2c-axxia.txt b/Bindings/i2c/i2c-axxia.txt
new file mode 100644
index 000000000000..2296d782b4c2
--- /dev/null
+++ b/Bindings/i2c/i2c-axxia.txt
@@ -0,0 +1,30 @@
+LSI Axxia I2C
+
+Required properties :
+- compatible : Must be "lsi,api2c"
+- reg : Offset and length of the register set for the device
+- interrupts : the interrupt specifier
+- #address-cells : Must be <1>;
+- #size-cells : Must be <0>;
+- clock-names : Must contain "i2c".
+- clocks: Must contain an entry for each name in clock-names. See the common
+  clock bindings.
+
+Optional properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
+  the default 100 kHz frequency will be used. As only Normal and Fast modes
+  are supported, possible values are 100000 and 400000.
+
+Example :
+
+i2c@02010084000 {
+	compatible = "lsi,api2c";
+	device_type = "i2c";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x20 0x10084000 0x00 0x1000>;
+	interrupts = <0 19 4>;
+	clocks = <&clk_per>;
+	clock-names = "i2c";
+	clock-frequency = <400000>;
+};
diff --git a/Bindings/i2c/i2c-designware.txt b/Bindings/i2c/i2c-designware.txt
index 5199b0c8cf7a..fee26dc3e858 100644
--- a/Bindings/i2c/i2c-designware.txt
+++ b/Bindings/i2c/i2c-designware.txt
@@ -14,10 +14,10 @@ Optional properties :
  - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
    This option is only supported in hardware blocks version 1.11a or newer.
 
- - i2c-scl-falling-time : should contain the SCL falling time in nanoseconds.
+ - i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds.
    This value which is by default 300ns is used to compute the tLOW period.
 
- - i2c-sda-falling-time : should contain the SDA falling time in nanoseconds.
+ - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
    This value which is by default 300ns is used to compute the tHIGH period.
 
 Example :
diff --git a/Bindings/i2c/i2c-exynos5.txt b/Bindings/i2c/i2c-exynos5.txt
index d4745e31f5c6..2dbc0b62daa6 100644
--- a/Bindings/i2c/i2c-exynos5.txt
+++ b/Bindings/i2c/i2c-exynos5.txt
@@ -12,6 +12,8 @@ Required properties:
 				on Exynos5250 and Exynos5420 SoCs.
 	-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
 				on Exynos5260 SoCs.
+	-> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
+				on Exynos7 SoCs.
 
   - reg: physical base address of the controller and length of memory mapped
     region.
diff --git a/Bindings/i2c/i2c-hix5hd2.txt b/Bindings/i2c/i2c-hix5hd2.txt
new file mode 100644
index 000000000000..f98b37401e6e
--- /dev/null
+++ b/Bindings/i2c/i2c-hix5hd2.txt
@@ -0,0 +1,24 @@
+I2C for Hisilicon hix5hd2 chipset platform
+
+Required properties:
+- compatible: Must be "hisilicon,hix5hd2-i2c"
+- reg: physical base address of the controller and length of memory mapped
+     region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+- clocks: phandles to input clocks.
+
+Optional properties:
+- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
+- Child nodes conforming to i2c bus binding
+
+Examples:
+I2C0@f8b10000 {
+	compatible = "hisilicon,hix5hd2-i2c";
+	reg = <0xf8b10000 0x1000>;
+	interrupts = <0 38 4>;
+	clocks = <&clock HIX5HD2_I2C0_RST>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+}
diff --git a/Bindings/i2c/i2c-img-scb.txt b/Bindings/i2c/i2c-img-scb.txt
new file mode 100644
index 000000000000..b6461602dca5
--- /dev/null
+++ b/Bindings/i2c/i2c-img-scb.txt
@@ -0,0 +1,26 @@
+IMG Serial Control Bus (SCB) I2C Controller
+
+Required Properties:
+- compatible: "img,scb-i2c"
+- reg: Physical base address and length of controller registers
+- interrupts: Interrupt number used by the controller
+- clocks : Should contain a clock specifier for each entry in clock-names
+- clock-names : Should contain the following entries:
+                "scb", for the SCB core clock.
+                "sys", for the system clock.
+- clock-frequency: The I2C bus frequency in Hz
+- #address-cells: Should be <1>
+- #size-cells: Should be <0>
+
+Example:
+
+i2c@18100000 {
+	compatible = "img,scb-i2c";
+	reg = <0x18100000 0x200>;
+	interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&i2c0_clk>, <&system_clk>;
+	clock-names = "scb", "sys";
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
diff --git a/Bindings/i2c/i2c-imx.txt b/Bindings/i2c/i2c-imx.txt
index 4a8513e44740..52d37fd8d3e5 100644
--- a/Bindings/i2c/i2c-imx.txt
+++ b/Bindings/i2c/i2c-imx.txt
@@ -11,6 +11,8 @@ Required properties:
 Optional properties:
 - clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
   The absence of the propoerty indicates the default frequency 100 kHz.
+- dmas: A list of two dma specifiers, one for each entry in dma-names.
+- dma-names: should contain "tx" and "rx".
 
 Examples:
 
@@ -26,3 +28,12 @@ i2c@70038000 { /* HS-I2C on i.MX51 */
 	interrupts = <64>;
 	clock-frequency = <400000>;
 };
+
+i2c0: i2c@40066000 { /* i2c0 on vf610 */
+	compatible = "fsl,vf610-i2c";
+	reg = <0x40066000 0x1000>;
+	interrupts =<0 71 0x04>;
+	dmas = <&edma0 0 50>,
+		<&edma0 0 51>;
+	dma-names = "rx","tx";
+};
diff --git a/Bindings/i2c/i2c-meson.txt b/Bindings/i2c/i2c-meson.txt
new file mode 100644
index 000000000000..682f9a6f766e
--- /dev/null
+++ b/Bindings/i2c/i2c-meson.txt
@@ -0,0 +1,24 @@
+Amlogic Meson I2C controller
+
+Required properties:
+ - compatible: must be "amlogic,meson6-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+
+Optional properties:
+- clock-frequency: the desired I2C bus clock frequency in Hz; in
+  absence of this property the default value is used (100 kHz).
+
+Examples:
+
+	i2c@c8100500 {
+		compatible = "amlogic,meson6-i2c";
+		reg = <0xc8100500 0x20>;
+		interrupts = <0 92 1>;
+		clocks = <&clk81>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Bindings/i2c/i2c-mux-pca954x.txt b/Bindings/i2c/i2c-mux-pca954x.txt
index 34a3fb6f8488..cf53d5fba20a 100644
--- a/Bindings/i2c/i2c-mux-pca954x.txt
+++ b/Bindings/i2c/i2c-mux-pca954x.txt
@@ -16,6 +16,9 @@ Required Properties:
 Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the reset input.
+  - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
+    children in idle state. This is necessary for example, if there are several
+    multiplexers on the bus and the devices behind them use same I2C addresses.
 
 
 Example:
diff --git a/Bindings/i2c/i2c-ocores.txt b/Bindings/i2c/i2c-ocores.txt
index 1637c298a1b3..17bef9a34e50 100644
--- a/Bindings/i2c/i2c-ocores.txt
+++ b/Bindings/i2c/i2c-ocores.txt
@@ -4,24 +4,60 @@ Required properties:
 - compatible      : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
 - reg             : bus address start and address range size of device
 - interrupts      : interrupt number
-- clock-frequency : frequency of bus clock in Hz
+- clocks          : handle to the controller clock; see the note below.
+                    Mutually exclusive with opencores,ip-clock-frequency
+- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
+                    see the note below. Mutually exclusive with clocks
 - #address-cells  : should be <1>
 - #size-cells     : should be <0>
 
 Optional properties:
+- clock-frequency : frequency of bus clock in Hz; see the note below.
+                    Defaults to 100 KHz when the property is not specified
 - reg-shift       : device register offsets are shifted by this value
 - reg-io-width    : io register width in bytes (1, 2 or 4)
 - regstep         : deprecated, use reg-shift above
 
-Example:
+Note
+clock-frequency property is meant to control the bus frequency for i2c bus
+drivers, but it was incorrectly used to specify i2c controller input clock
+frequency. So the following rules are set to fix this situation:
+- if clock-frequency is present and neither opencores,ip-clock-frequency nor
+  clocks are, then clock-frequency specifies i2c controller clock frequency.
+  This is to keep backwards compatibility with setups using old DTB. i2c bus
+  frequency is fixed at 100 KHz.
+- if clocks is present it specifies i2c controller clock. clock-frequency
+  property specifies i2c bus frequency.
+- if opencores,ip-clock-frequency is present it specifies i2c controller
+  clock frequency. clock-frequency property specifies i2c bus frequency.
 
+Examples:
+
+	i2c0: ocores@a0000000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "opencores,i2c-ocores";
+		reg = <0xa0000000 0x8>;
+		interrupts = <10>;
+		opencores,ip-clock-frequency = <20000000>;
+
+		reg-shift = <0>;	/* 8 bit registers */
+		reg-io-width = <1>;	/* 8 bit read/write */
+
+		dummy@60 {
+			compatible = "dummy";
+			reg = <0x60>;
+		};
+	};
+or
 	i2c0: ocores@a0000000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "opencores,i2c-ocores";
 		reg = <0xa0000000 0x8>;
 		interrupts = <10>;
-		clock-frequency = <20000000>;
+		clocks = <&osc>;
+		clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
 
 		reg-shift = <0>;	/* 8 bit registers */
 		reg-io-width = <1>;	/* 8 bit read/write */
diff --git a/Bindings/i2c/i2c-opal.txt b/Bindings/i2c/i2c-opal.txt
new file mode 100644
index 000000000000..12bc61465ee5
--- /dev/null
+++ b/Bindings/i2c/i2c-opal.txt
@@ -0,0 +1,37 @@
+Device-tree bindings for I2C OPAL driver
+----------------------------------------
+
+Most of the device node and properties layout is specific to the firmware and
+used by the firmware itself for configuring the port. From the linux
+perspective, the properties of use are "ibm,port-name" and "ibm,opal-id".
+
+Required properties:
+
+- reg: Port-id within a given master
+- compatible: must be "ibm,opal-i2c"
+- ibm,opal-id: Refers to a specific bus and used to identify it when calling
+	       the relevant OPAL functions.
+- bus-frequency: Operating frequency of the i2c bus (in HZ). Informational for
+		 linux, used by the FW though.
+
+Optional properties:
+- ibm,port-name: Firmware provides this name that uniquely identifies the i2c
+		 port.
+
+The node contains a number of other properties that are used by the FW itself
+and depend on the specific hardware implementation. The example below depicts
+a P8 on-chip bus.
+
+Example:
+
+i2c-bus@0 {
+	reg = <0x0>;
+	bus-frequency = <0x61a80>;
+	compatible = "ibm,power8-i2c-port", "ibm,opal-i2c";
+	ibm,opal-id = <0x1>;
+	ibm,port-name = "p8_00000000_e1p0";
+	#address-cells = <0x1>;
+	phandle = <0x10000006>;
+	#size-cells = <0x0>;
+	linux,phandle = <0x10000006>;
+};
diff --git a/Bindings/i2c/i2c-rk3x.txt b/Bindings/i2c/i2c-rk3x.txt
index dde6c22ce91a..f0d71bc52e64 100644
--- a/Bindings/i2c/i2c-rk3x.txt
+++ b/Bindings/i2c/i2c-rk3x.txt
@@ -21,6 +21,17 @@ Required on RK3066, RK3188 :
 Optional properties :
 
  - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
+ - i2c-scl-rising-time-ns : Number of nanoseconds the SCL signal takes to rise
+	(t(r) in I2C specification). If not specified this is assumed to be
+	the maximum the specification allows(1000 ns for Standard-mode,
+	300 ns for Fast-mode) which might cause slightly slower communication.
+ - i2c-scl-falling-time-ns : Number of nanoseconds the SCL signal takes to fall
+	(t(f) in the I2C specification). If not specified this is assumed to
+	be the maximum the specification allows (300 ns) which might cause
+	slightly slower communication.
+ - i2c-sda-falling-time-ns : Number of nanoseconds the SDA signal takes to fall
+	(t(f) in the I2C specification). If not specified we'll use the SCL
+	value since they are the same in nearly all cases.
 
 Example:
 
@@ -39,4 +50,7 @@ i2c0: i2c@2002d000 {
 
 	clock-names = "i2c";
 	clocks = <&cru PCLK_I2C0>;
+
+	i2c-scl-rising-time-ns = <800>;
+	i2c-scl-falling-time-ns = <100>;
 };
diff --git a/Bindings/i2c/i2c-s3c2410.txt b/Bindings/i2c/i2c-s3c2410.txt
index 278de8e64bbf..89b3250f049b 100644
--- a/Bindings/i2c/i2c-s3c2410.txt
+++ b/Bindings/i2c/i2c-s3c2410.txt
@@ -32,6 +32,7 @@ Optional properties:
     specified, default value is 0.
   - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
     specified, the default value in Hz is 100000.
+  - samsung,sysreg-phandle - handle to syscon used to control the system registers
 
 Example:
 
diff --git a/Bindings/i2c/i2c-sh_mobile.txt b/Bindings/i2c/i2c-sh_mobile.txt
index d2153ce36fa8..2bfc6e7ed094 100644
--- a/Bindings/i2c/i2c-sh_mobile.txt
+++ b/Bindings/i2c/i2c-sh_mobile.txt
@@ -2,6 +2,15 @@ Device tree configuration for Renesas IIC (sh_mobile) driver
 
 Required properties:
 - compatible      : "renesas,iic-<soctype>". "renesas,rmobile-iic" as fallback
+		     Examples with soctypes are:
+			- "renesas,iic-r8a73a4" (R-Mobile APE6)
+			- "renesas,iic-r8a7740" (R-Mobile A1)
+			- "renesas,iic-r8a7790" (R-Car H2)
+			- "renesas,iic-r8a7791" (R-Car M2-W)
+			- "renesas,iic-r8a7792" (R-Car V2H)
+			- "renesas,iic-r8a7793" (R-Car M2-N)
+			- "renesas,iic-r8a7794" (R-Car E2)
+			- "renesas,iic-sh73a0" (SH-Mobile AG5)
 - reg             : address start and address range size of device
 - interrupts      : interrupt of device
 - clocks          : clock for device
@@ -10,6 +19,11 @@ Required properties:
 
 Optional properties:
 - clock-frequency : frequency of bus clock in Hz. Default 100kHz if unset.
+- dmas            : Must contain a list of two references to DMA
+		    specifiers, one for transmission, and one for
+		    reception.
+- dma-names       : Must contain a list of two DMA names, "tx" and "rx".
+
 
 Pinctrl properties might be needed, too. See there.
 
diff --git a/Bindings/i2c/i2c-st.txt b/Bindings/i2c/i2c-st.txt
index 437e0db3823c..4c26fda3844a 100644
--- a/Bindings/i2c/i2c-st.txt
+++ b/Bindings/i2c/i2c-st.txt
@@ -31,7 +31,7 @@ i2c0: i2c@fed40000 {
 	compatible	= "st,comms-ssc4-i2c";
 	reg		= <0xfed40000 0x110>;
 	interrupts	=  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-	clocks		= <&CLK_S_ICN_REG_0>;
+	clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
 	clock-names	= "ssc";
 	clock-frequency = <400000>;
 	pinctrl-names	= "default";
diff --git a/Bindings/i2c/nvidia,tegra20-i2c.txt b/Bindings/i2c/nvidia,tegra20-i2c.txt
index 87507e9ce6db..656716b72cc4 100644
--- a/Bindings/i2c/nvidia,tegra20-i2c.txt
+++ b/Bindings/i2c/nvidia,tegra20-i2c.txt
@@ -1,11 +1,11 @@
 NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
 
 Required properties:
-- compatible : should be:
-	"nvidia,tegra114-i2c"
-	"nvidia,tegra30-i2c"
-	"nvidia,tegra20-i2c"
-	"nvidia,tegra20-i2c-dvc"
+- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or
+  "nvidia,tegra20-i2c".  For Tegra30, must be "nvidia,tegra30-i2c".
+  For Tegra114, must be "nvidia,tegra114-i2c".  Otherwise, must be
+  "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is
+  tegra124, tegra132, or tegra210.
   Details of compatible are as follows:
   nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
 	controller. This only support master mode of I2C communication. Register
diff --git a/Bindings/i2c/ti,bq32k.txt b/Bindings/i2c/ti,bq32k.txt
new file mode 100644
index 000000000000..e204906b9ad3
--- /dev/null
+++ b/Bindings/i2c/ti,bq32k.txt
@@ -0,0 +1,18 @@
+* TI BQ32000                I2C Serial Real-Time Clock
+
+Required properties:
+- compatible: Should contain "ti,bq32000".
+- reg: I2C address for chip
+
+Optional properties:
+- trickle-resistor-ohms : Selected resistor for trickle charger
+       Values usable are 1120 and 20180
+       Should be given if trickle charger should be enabled
+- trickle-diode-disable : Do not use internal trickle charger diode
+       Should be given if internal trickle charger diode should be disabled
+Example:
+       bq32000: rtc@68 {
+               compatible = "ti,bq32000";
+               trickle-resistor-ohms = <1120>;
+               reg = <0x68>;
+       };
diff --git a/Bindings/i2c/trivial-devices.txt b/Bindings/i2c/trivial-devices.txt
index 6af570ec53b4..aaa8325004d2 100644
--- a/Bindings/i2c/trivial-devices.txt
+++ b/Bindings/i2c/trivial-devices.txt
@@ -9,6 +9,7 @@ document for it just like any other devices.
 
 Compatible		Vendor / Chip
 ==========		=============
+abracon,abb5zes3		AB-RTCMC-32.768kHz-B5ZE-S3: Real Time Clock/Calendar Module with I2C Interface
 ad,ad7414		SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert and Over Temperature Pin
 ad,adm9240		ADM9240:  Complete System Hardware Monitor for uProcessor-Based Systems
 adi,adt7461		+/-1C TDM Extended Temp Range I.C
@@ -17,6 +18,9 @@ adi,adt7473		+/-1C TDM Extended Temp Range I.C
 adi,adt7475		+/-1C TDM Extended Temp Range I.C
 adi,adt7476		+/-1C TDM Extended Temp Range I.C
 adi,adt7490		+/-1C TDM Extended Temp Range I.C
+adi,adxl345		Three-Axis Digital Accelerometer
+adi,adxl346		Three-Axis Digital Accelerometer
+adi,adxl34x		Three-Axis Digital Accelerometer
 at,24c08		i2c serial eeprom  (24cxx)
 atmel,24c00		i2c serial eeprom  (24cxx)
 atmel,24c01		i2c serial eeprom  (24cxx)
@@ -31,11 +35,11 @@ atmel,24c512		i2c serial eeprom  (24cxx)
 atmel,24c1024		i2c serial eeprom  (24cxx)
 atmel,at97sc3204t	i2c trusted platform module (TPM)
 capella,cm32181		CM32181: Ambient Light Sensor
+capella,cm3232		CM3232: Ambient Light Sensor
 catalyst,24c32		i2c serial eeprom
 cirrus,cs42l51		Cirrus Logic CS42L51 audio codec
 dallas,ds1307		64 x 8, Serial, I2C Real-Time Clock
 dallas,ds1338		I2C RTC with 56-Byte NV RAM
-dallas,ds1339		I2C Serial Real-Time Clock
 dallas,ds1340		I2C RTC with Trickle Charger
 dallas,ds1374		I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output
 dallas,ds1631		High-Precision Digital Thermometer
@@ -44,7 +48,8 @@ dallas,ds1775		Tiny Digital Thermometer and Thermostat
 dallas,ds3232		Extremely Accurate I²C RTC with Integrated Crystal and SRAM
 dallas,ds4510		CPU Supervisor with Nonvolatile Memory and Programmable I/O
 dallas,ds75		Digital Thermometer and Thermostat
-dialog,da9053		DA9053: flexible system level PMIC with multicore support
+dlg,da9053		DA9053: flexible system level PMIC with multicore support
+dlg,da9063		DA9063: system PMIC for quad-core application processors
 epson,rx8025		High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
 epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
 fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
@@ -56,7 +61,8 @@ fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
 gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
 infineon,slb9635tt	Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
 infineon,slb9645tt	Infineon SLB9645 I2C TPM (new protocol, max 400khz)
-isl,isl12057		Intersil ISL12057 I2C RTC Chip
+isil,isl12057		Intersil ISL12057 I2C RTC Chip
+isil,isl29028		Intersil ISL29028 Ambient Light and Proximity Sensor
 maxim,ds1050		5 Bit Programmable, Pulse-Width Modulator
 maxim,max1237		Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
 maxim,max6625		9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
@@ -75,7 +81,12 @@ ovti,ov5642		OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI an
 pericom,pt7c4338	Real-time Clock Module
 plx,pex8648		48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
 ramtron,24c64		i2c serial eeprom  (24cxx)
+ricoh,r2025sd		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoh,r2221tl		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
 ricoh,rs5c372a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoh,rs5c372b		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoh,rv5c386		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
+ricoh,rv5c387a		I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
 samsung,24ad0xd1	S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power)
 sii,s35390a		2-wire CMOS real-time clock
 st-micro,24c256		i2c serial eeprom  (24cxx)
diff --git a/Bindings/iio/adc/cc10001_adc.txt b/Bindings/iio/adc/cc10001_adc.txt
new file mode 100644
index 000000000000..904f76de9055
--- /dev/null
+++ b/Bindings/iio/adc/cc10001_adc.txt
@@ -0,0 +1,22 @@
+* Cosmic Circuits - Analog to Digital Converter (CC-10001-ADC)
+
+Required properties:
+  - compatible: Should be "cosmic,10001-adc"
+  - reg: Should contain adc registers location and length.
+  - clock-names: Should contain "adc".
+  - clocks: Should contain a clock specifier for each entry in clock-names
+  - vref-supply: The regulator supply ADC reference voltage.
+
+Optional properties:
+  - adc-reserved-channels: Bitmask of reserved channels,
+    i.e. channels that cannot be used by the OS.
+
+Example:
+adc: adc@18101600 {
+	compatible = "cosmic,10001-adc";
+	reg = <0x18101600 0x24>;
+	adc-reserved-channels = <0x2>;
+	clocks = <&adc_clk>;
+	clock-names = "adc";
+	vref-supply = <&reg_1v8>;
+};
diff --git a/Bindings/iio/adc/qcom,spmi-iadc.txt b/Bindings/iio/adc/qcom,spmi-iadc.txt
new file mode 100644
index 000000000000..4e36d6e2f7b6
--- /dev/null
+++ b/Bindings/iio/adc/qcom,spmi-iadc.txt
@@ -0,0 +1,46 @@
+Qualcomm's SPMI PMIC current ADC
+
+QPNP PMIC current ADC (IADC) provides interface to clients to read current.
+A 16 bit ADC is used for current measurements. IADC can measure the current
+through an external resistor (channel 1) or internal (built-in) resistor
+(channel 0). When using an external resistor it is to be described by
+qcom,external-resistor-micro-ohms property.
+
+IADC node:
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,spmi-iadc".
+
+- reg:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: IADC base address and length in the SPMI PMIC register map
+
+- interrupts:
+    Usage: optional
+    Value type: <prop-encoded-array>
+    Definition: End of ADC conversion.
+
+- qcom,external-resistor-micro-ohms:
+    Usage: optional
+    Value type: <u32>
+    Definition: Sense resister value in micro Ohm.
+                If not defined value of 10000 micro Ohms will be used.
+
+Example:
+	/* IADC node */
+	pmic_iadc: iadc@3600 {
+		compatible = "qcom,spmi-iadc";
+		reg = <0x3600 0x100>;
+		interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+		qcom,external-resistor-micro-ohms = <10000>;
+		#io-channel-cells  = <1>;
+	};
+
+	/* IIO client node */
+	bat {
+		io-channels = <&pmic_iadc  0>;
+		io-channel-names = "iadc";
+	};
diff --git a/Bindings/iio/adc/qcom,spmi-vadc.txt b/Bindings/iio/adc/qcom,spmi-vadc.txt
new file mode 100644
index 000000000000..0fb46137f936
--- /dev/null
+++ b/Bindings/iio/adc/qcom,spmi-vadc.txt
@@ -0,0 +1,129 @@
+Qualcomm's SPMI PMIC voltage ADC
+
+SPMI PMIC voltage ADC (VADC) provides interface to clients to read
+voltage. The VADC is a 15-bit sigma-delta ADC.
+
+VADC node:
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,spmi-vadc".
+
+- reg:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: VADC base address and length in the SPMI PMIC register map.
+
+- #address-cells:
+    Usage: required
+    Value type: <u32>
+    Definition: Must be one. Child node 'reg' property should define ADC
+            channel number.
+
+- #size-cells:
+    Usage: required
+    Value type: <u32>
+    Definition: Must be zero.
+
+- #io-channel-cells:
+    Usage: required
+    Value type: <u32>
+    Definition: Must be one. For details about IIO bindings see:
+            Documentation/devicetree/bindings/iio/iio-bindings.txt
+
+- interrupts:
+    Usage: optional
+    Value type: <prop-encoded-array>
+    Definition: End of conversion interrupt.
+
+Channel node properties:
+
+- reg:
+    Usage: required
+    Value type: <u32>
+    Definition: ADC channel number.
+            See include/dt-bindings/iio/qcom,spmi-vadc.h
+
+- qcom,decimation:
+    Usage: optional
+    Value type: <u32>
+    Definition: This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+            Valid values are 512, 1024, 2048, 4096.
+            If property is not found, default value of 512 will be used.
+
+- qcom,pre-scaling:
+    Usage: optional
+    Value type: <u32 array>
+    Definition: Used for scaling the channel input signal before the signal is
+            fed to VADC. The configuration for this node is to know the
+            pre-determined ratio and use it for post scaling. Select one from
+            the following options.
+            <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
+            If property is not found default value depending on chip will be used.
+
+- qcom,ratiometric:
+    Usage: optional
+    Value type: <empty>
+    Definition: Channel calibration type. If this property is specified
+            VADC will use the VDD reference (1.8V) and GND for channel
+            calibration. If property is not found, channel will be
+            calibrated with 0.625V and 1.25V reference channels, also
+            known as absolute calibration.
+
+- qcom,hw-settle-time:
+    Usage: optional
+    Value type: <u32>
+    Definition: Time between AMUX getting configured and the ADC starting
+            conversion. Delay = 100us * (value) for value < 11, and
+            2ms * (value - 10) otherwise.
+            Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
+            900 us and 1, 2, 4, 6, 8, 10 ms
+            If property is not found, channel will use 0us.
+
+- qcom,avg-samples:
+    Usage: optional
+    Value type: <u32>
+    Definition: Number of samples to be used for measurement.
+            Averaging provides the option to obtain a single measurement
+            from the ADC that is an average of multiple samples. The value
+            selected is 2^(value).
+            Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
+            If property is not found, 1 sample will be used.
+
+NOTE:
+
+Following channels, also known as reference point channels, are used for
+result calibration and their channel configuration nodes should be defined:
+VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
+VADC_GND_REF and VADC_VDD_VADC.
+
+Example:
+
+	/* VADC node */
+	pmic_vadc: vadc@3100 {
+		compatible = "qcom,spmi-vadc";
+		reg = <0x3100 0x100>;
+		interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+
+		/* Channel node */
+		usb_id_nopull {
+			reg = <VADC_LR_MUX10_USB_ID>;
+			qcom,decimation = <512>;
+			qcom,ratiometric;
+			qcom,hw-settle-time = <200>;
+			qcom,avg-samples = <1>;
+			qcom,pre-scaling = <1 3>;
+		};
+	};
+
+	/* IIO client node */
+	usb {
+		io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
+		io-channel-names = "vadc";
+	};
diff --git a/Bindings/iio/adc/rockchip-saradc.txt b/Bindings/iio/adc/rockchip-saradc.txt
new file mode 100644
index 000000000000..a9a5fe19ff2a
--- /dev/null
+++ b/Bindings/iio/adc/rockchip-saradc.txt
@@ -0,0 +1,24 @@
+Rockchip Successive Approximation Register (SAR) A/D Converter bindings
+
+Required properties:
+- compatible: Should be "rockchip,saradc" or "rockchip,rk3066-tsadc"
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+              depends on the interrupt controller.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "saradc" for the converter-clock, and "apb_pclk" for
+               the peripheral clock.
+- vref-supply: The regulator supply ADC reference voltage.
+- #io-channel-cells: Should be 1, see ../iio-bindings.txt
+
+Example:
+	saradc: saradc@2006c000 {
+		compatible = "rockchip,saradc";
+		reg = <0x2006c000 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		#io-channel-cells = <1>;
+		vref-supply = <&vcc18>;
+	};
diff --git a/Bindings/iio/adc/vf610-adc.txt b/Bindings/iio/adc/vf610-adc.txt
index dcebff1928e1..1a4a43d5c9ea 100644
--- a/Bindings/iio/adc/vf610-adc.txt
+++ b/Bindings/iio/adc/vf610-adc.txt
@@ -9,7 +9,7 @@ Required properties:
 - interrupts: Should contain the interrupt for the device
 - clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock.
 - clock-names: Must contain "adc", matching entry in the clocks property.
-- vref-supply: The regulator supply ADC refrence voltage.
+- vref-supply: The regulator supply ADC reference voltage.
 
 Example:
 adc0: adc@4003b000 {
diff --git a/Bindings/iio/adc/xilinx-xadc.txt b/Bindings/iio/adc/xilinx-xadc.txt
index d9ee909d2b78..d71258e2d456 100644
--- a/Bindings/iio/adc/xilinx-xadc.txt
+++ b/Bindings/iio/adc/xilinx-xadc.txt
@@ -59,7 +59,7 @@ Optional properties:
 	  Each child node represents one channel and has the following
 	  properties:
 		Required properties:
-			* reg: Pair of pins the the channel is connected to.
+			* reg: Pair of pins the channel is connected to.
 				0: VP/VN
 				1: VAUXP[0]/VAUXN[0]
 				2: VAUXP[1]/VAUXN[1]
diff --git a/Bindings/iio/dac/max5821.txt b/Bindings/iio/dac/max5821.txt
new file mode 100644
index 000000000000..54276ce8c971
--- /dev/null
+++ b/Bindings/iio/dac/max5821.txt
@@ -0,0 +1,14 @@
+Maxim max5821 DAC device driver
+
+Required properties:
+	- compatible: Must be "maxim,max5821"
+	- reg: Should contain the DAC I2C address
+	- vref-supply: Phandle to the vref power supply
+
+Example:
+
+	max5821@38 {
+		compatible = "maxim,max5821";
+		reg = <0x38>;
+		vref-supply = <&reg_max5821>;
+	};
diff --git a/Bindings/iio/sensorhub.txt b/Bindings/iio/sensorhub.txt
new file mode 100644
index 000000000000..8d57571d5c0b
--- /dev/null
+++ b/Bindings/iio/sensorhub.txt
@@ -0,0 +1,25 @@
+Samsung Sensorhub driver
+
+Sensorhub is a MCU which manages several sensors and also plays the role
+of a virtual sensor device.
+
+Required properties:
+- compatible: "samsung,sensorhub-rinato" or "samsung,sensorhub-thermostat"
+- spi-max-frequency: max SPI clock frequency
+- interrupt-parent: interrupt parent
+- interrupts: communication interrupt
+- ap-mcu-gpios: [out] ap to sensorhub line - used during communication
+- mcu-ap-gpios: [in] sensorhub to ap - used during communication
+- mcu-reset-gpios: [out] sensorhub reset
+
+Example:
+
+	shub_spi: shub {
+		compatible = "samsung,sensorhub-rinato";
+		spi-max-frequency = <5000000>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <2 0>;
+		ap-mcu-gpios = <&gpx0 0 0>;
+		mcu-ap-gpios = <&gpx0 4 0>;
+		mcu-reset-gpios = <&gpx0 5 0>;
+	};
diff --git a/Bindings/input/atmel,maxtouch.txt b/Bindings/input/atmel,maxtouch.txt
index baef432e8369..1852906517ab 100644
--- a/Bindings/input/atmel,maxtouch.txt
+++ b/Bindings/input/atmel,maxtouch.txt
@@ -11,10 +11,17 @@ Required properties:
 
 Optional properties for main touchpad device:
 
-- linux,gpio-keymap: An array of up to 4 entries indicating the Linux
-    keycode generated by each GPIO. Linux keycodes are defined in
+- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
+    on GPIO bit changes. An array of up to 8 entries can be provided
+    indicating the Linux keycode mapped to each bit of the status byte,
+    starting at the LSB. Linux keycodes are defined in
     <dt-bindings/input/input.h>.
 
+    Note: the numbering of the GPIOs and the bit they start at varies between
+    maXTouch devices. You must either refer to the documentation, or
+    experiment to determine which bit corresponds to which input. Use
+    KEY_RESERVED for unused padding values.
+
 Example:
 
 	touch@4b {
diff --git a/Bindings/input/cap11xx.txt b/Bindings/input/cap11xx.txt
new file mode 100644
index 000000000000..7d0a3009771b
--- /dev/null
+++ b/Bindings/input/cap11xx.txt
@@ -0,0 +1,59 @@
+Device tree bindings for Microchip CAP11xx based capacitive touch sensors
+
+The node for this device must be a child of a I2C controller node, as the
+device communication via I2C only.
+
+Required properties:
+
+	compatible:		Must contain one of:
+					"microchip,cap1106"
+					"microchip,cap1126"
+					"microchip,cap1188"
+
+	reg:			The I2C slave address of the device.
+
+	interrupts:		Property describing the interrupt line the
+				device's ALERT#/CM_IRQ# pin is connected to.
+				The device only has one interrupt source.
+
+Optional properties:
+
+	autorepeat:		Enables the Linux input system's autorepeat
+				feature on the input device.
+
+	microchip,sensor-gain:	Defines the gain of the sensor circuitry. This
+				effectively controls the sensitivity, as a
+				smaller delta capacitance is required to
+				generate the same delta count values.
+				Valid values are 1, 2, 4, and 8.
+				By default, a gain of 1 is set.
+
+	microchip,irq-active-high:	By default the interrupt pin is active low
+				open drain. This property allows using the active
+				high push-pull output.
+
+	linux,keycodes:		Specifies an array of numeric keycode values to
+				be used for the channels. If this property is
+				omitted, KEY_A, KEY_B, etc are used as
+				defaults. The array must have exactly six
+				entries.
+
+Example:
+
+i2c_controller {
+	cap1106@28 {
+		compatible = "microchip,cap1106";
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 0>;
+		reg = <0x28>;
+		autorepeat;
+		microchip,sensor-gain = <2>;
+
+		linux,keycodes = <103>,		/* KEY_UP */
+				 <106>,		/* KEY_RIGHT */
+				 <108>,		/* KEY_DOWN */
+				 <105>,		/* KEY_LEFT */
+				 <109>,		/* KEY_PAGEDOWN */
+				 <104>;		/* KEY_PAGEUP */
+	};
+}
diff --git a/Bindings/input/e3x0-button.txt b/Bindings/input/e3x0-button.txt
new file mode 100644
index 000000000000..751665e8e47a
--- /dev/null
+++ b/Bindings/input/e3x0-button.txt
@@ -0,0 +1,25 @@
+National Instruments Ettus Research USRP E3x0 button driver
+
+This module is part of the NI Ettus Research USRP E3x0 SDR.
+
+This module provides a simple power button event via two interrupts.
+
+Required properties:
+- compatible: should be one of the following
+  - "ettus,e3x0-button": For devices such as the NI Ettus Research USRP E3x0
+- interrupt-parent:
+  - a phandle to the interrupt controller that it is attached to.
+- interrupts: should be one of the following
+  - <0 30 1>, <0 31 1>: For devices such as the NI Ettus Research USRP E3x0
+- interrupt-names: should be one of the following
+  - "press", "release": For devices such as the NI Ettus Research USRP E3x0
+
+Note: Interrupt numbers might vary depending on the FPGA configuration.
+
+Example:
+	button {
+		compatible = "ettus,e3x0-button";
+		interrupt-parent = <&intc>;
+		interrupts = <0 30 1>, <0 31 1>;
+		interrupt-names = "press", "release";
+	}
diff --git a/Bindings/input/elan_i2c.txt b/Bindings/input/elan_i2c.txt
new file mode 100644
index 000000000000..ee3242c4ba67
--- /dev/null
+++ b/Bindings/input/elan_i2c.txt
@@ -0,0 +1,34 @@
+Elantech I2C Touchpad
+
+Required properties:
+- compatible: must be "elan,ekth3000".
+- reg: I2C address of the chip.
+- interrupt-parent: a phandle for the interrupt controller (see interrupt
+  binding[0]).
+- interrupts: interrupt to which the chip is connected (see interrupt
+  binding[0]).
+
+Optional properties:
+- wakeup-source: touchpad can be used as a wakeup source.
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the device (see
+  pinctrl binding [1]).
+- vcc-supply: a phandle for the regulator supplying 3.3V power.
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+	&i2c1 {
+		/* ... */
+
+		touchpad@15 {
+			compatible = "elan,ekth3000";
+			reg = <0x15>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		/* ... */
+	};
diff --git a/Bindings/input/elants_i2c.txt b/Bindings/input/elants_i2c.txt
new file mode 100644
index 000000000000..a765232e6446
--- /dev/null
+++ b/Bindings/input/elants_i2c.txt
@@ -0,0 +1,33 @@
+Elantech I2C Touchscreen
+
+Required properties:
+- compatible: must be "elan,ekth3500".
+- reg: I2C address of the chip.
+- interrupt-parent: a phandle for the interrupt controller (see interrupt
+  binding[0]).
+- interrupts: interrupt to which the chip is connected (see interrupt
+  binding[0]).
+
+Optional properties:
+- wakeup-source: touchscreen can be used as a wakeup source.
+- pinctrl-names: should be "default" (see pinctrl binding [1]).
+- pinctrl-0: a phandle pointing to the pin settings for the device (see
+  pinctrl binding [1]).
+
+[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+	&i2c1 {
+		/* ... */
+
+		touchscreen@10 {
+			compatible = "elan,ekth3500";
+			reg = <0x10>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		/* ... */
+	};
diff --git a/Bindings/input/gpio-keys.txt b/Bindings/input/gpio-keys.txt
index 5c2c02140a62..44b705767aca 100644
--- a/Bindings/input/gpio-keys.txt
+++ b/Bindings/input/gpio-keys.txt
@@ -11,15 +11,22 @@ Each button (key) is represented as a sub-node of "gpio-keys":
 Subnode properties:
 
 	- gpios: OF device-tree gpio specification.
+	- interrupts: the interrupt line for that input.
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.
 
+Note that either "interrupts" or "gpios" properties can be omitted, but not
+both at the same time. Specifying both properties is allowed.
+
 Optional subnode-properties:
 	- linux,input-type: Specify event type this button/key generates.
 	  If not specified defaults to <1> == EV_KEY.
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
 	- gpio-key,wakeup: Boolean, button can wake-up the system.
+	- linux,can-disable: Boolean, indicates that button is connected
+	  to dedicated (not shared) interrupt which can be disabled to
+	  suppress events from the button.
 
 Example nodes:
 
@@ -33,4 +40,9 @@ Example nodes:
 				linux,code = <103>;
 				gpios = <&gpio1 0 1>;
 			};
+			button@22 {
+				label = "GPIO Key DOWN";
+				linux,code = <108>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			};
 			...
diff --git a/Bindings/input/regulator-haptic.txt b/Bindings/input/regulator-haptic.txt
new file mode 100644
index 000000000000..3ed1c7eb2f97
--- /dev/null
+++ b/Bindings/input/regulator-haptic.txt
@@ -0,0 +1,21 @@
+* Regulator Haptic Device Tree Bindings
+
+Required Properties:
+ - compatible : Should be "regulator-haptic"
+ - haptic-supply : Power supply to the haptic motor.
+	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+ - max-microvolt : The maximum voltage value supplied to the haptic motor.
+		[The unit of the voltage is a micro]
+
+ - min-microvolt : The minimum voltage value supplied to the haptic motor.
+		[The unit of the voltage is a micro]
+
+Example:
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_regulator>;
+		max-microvolt = <2700000>;
+		min-microvolt = <1100000>;
+	};
diff --git a/Bindings/input/stmpe-keypad.txt b/Bindings/input/stmpe-keypad.txt
index 1b97222e8a0b..12bb771d66d4 100644
--- a/Bindings/input/stmpe-keypad.txt
+++ b/Bindings/input/stmpe-keypad.txt
@@ -8,6 +8,8 @@ Optional properties:
  - debounce-interval        : Debouncing interval time in milliseconds
  - st,scan-count            : Scanning cycles elapsed before key data is updated
  - st,no-autorepeat         : If specified device will not autorepeat
+ - keypad,num-rows          : See ./matrix-keymap.txt
+ - keypad,num-columns       : See ./matrix-keymap.txt
 
 Example:
 
diff --git a/Bindings/input/sun4i-lradc-keys.txt b/Bindings/input/sun4i-lradc-keys.txt
new file mode 100644
index 000000000000..b9c32f6fd687
--- /dev/null
+++ b/Bindings/input/sun4i-lradc-keys.txt
@@ -0,0 +1,62 @@
+Allwinner sun4i low res adc attached tablet keys
+------------------------------------------------
+
+Required properties:
+ - compatible: "allwinner,sun4i-a10-lradc-keys"
+ - reg: mmio address range of the chip
+ - interrupts: interrupt to which the chip is connected
+ - vref-supply: powersupply for the lradc reference voltage
+
+Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys":
+
+Required subnode-properties:
+	- label: Descriptive name of the key.
+	- linux,code: Keycode to emit.
+	- channel: Channel this key is attached to, mut be 0 or 1.
+	- voltage: Voltage in µV at lradc input when this key is pressed.
+
+Example:
+
+#include <dt-bindings/input/input.h>
+
+	lradc: lradc@01c22800 {
+		compatible = "allwinner,sun4i-a10-lradc-keys";
+		reg = <0x01c22800 0x100>;
+		interrupts = <31>;
+		vref-supply = <&reg_vcc3v0>;
+
+		button@191 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			channel = <0>;
+			voltage = <191274>;
+		};
+
+		button@392 {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			channel = <0>;
+			voltage = <392644>;
+		};
+
+		button@601 {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			channel = <0>;
+			voltage = <601151>;
+		};
+
+		button@795 {
+			label = "Enter";
+			linux,code = <KEY_ENTER>;
+			channel = <0>;
+			voltage = <795090>;
+		};
+
+		button@987 {
+			label = "Home";
+			linux,code = <KEY_HOMEPAGE>;
+			channel = <0>;
+			voltage = <987387>;
+		};
+	};
diff --git a/Bindings/input/ti,drv260x.txt b/Bindings/input/ti,drv260x.txt
new file mode 100644
index 000000000000..ee09c8f4474a
--- /dev/null
+++ b/Bindings/input/ti,drv260x.txt
@@ -0,0 +1,50 @@
+* Texas Instruments - drv260x Haptics driver family
+
+Required properties:
+	- compatible - One of:
+		"ti,drv2604" - DRV2604
+		"ti,drv2605" - DRV2605
+		"ti,drv2605l" - DRV2605L
+	- reg -  I2C slave address
+	- vbat-supply - Required supply regulator
+	- mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h)
+		DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric)
+		DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration
+				sequence during init.  And the device is configured for real
+				time playback mode (RTP mode).
+		DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator)
+	- library-sel - These are ROM based waveforms pre-programmed into the IC.
+				This should be set to set the library to use at power up.
+				(defined in include/dt-bindings/input/ti-drv260x.h)
+		DRV260X_LIB_EMPTY - Do not use a pre-programmed library
+		DRV260X_ERM_LIB_A - Pre-programmed Library
+		DRV260X_ERM_LIB_B - Pre-programmed Library
+		DRV260X_ERM_LIB_C - Pre-programmed Library
+		DRV260X_ERM_LIB_D - Pre-programmed Library
+		DRV260X_ERM_LIB_E - Pre-programmed Library
+		DRV260X_ERM_LIB_F - Pre-programmed Library
+		DRV260X_LIB_LRA - Pre-programmed LRA Library
+
+Optional properties:
+	- enable-gpio - gpio pin to enable/disable the device.
+	- vib-rated-mv - The rated voltage of the actuator in millivolts.
+			  If this is not set then the value will be defaulted to
+			  3.2 v.
+	- vib-overdrive-mv - The overdrive voltage of the actuator in millivolts.
+			  If this is not set then the value will be defaulted to
+			  3.2 v.
+Example:
+
+haptics: haptics@5a {
+	compatible = "ti,drv2605l";
+	reg = <0x5a>;
+	vbat-supply = <&vbat>;
+	enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	mode = <DRV260X_LRA_MODE>;
+	library-sel = <DRV260X_LIB_LRA>;
+	vib-rated-mv = <3200>;
+	vib-overdriver-mv = <3200>;
+}
+
+For more product information please see the link below:
+http://www.ti.com/product/drv2605
diff --git a/Bindings/input/ti,drv2667.txt b/Bindings/input/ti,drv2667.txt
new file mode 100644
index 000000000000..996382cf994a
--- /dev/null
+++ b/Bindings/input/ti,drv2667.txt
@@ -0,0 +1,17 @@
+* Texas Instruments - drv2667 Haptics driver
+
+Required properties:
+	- compatible - "ti,drv2667" - DRV2667
+	- reg -  I2C slave address
+	- vbat-supply - Required supply regulator
+
+Example:
+
+haptics: haptics@59 {
+	compatible = "ti,drv2667";
+	reg = <0x59>;
+	vbat-supply = <&vbat>;
+};
+
+For more product information please see the link below:
+http://www.ti.com/product/drv2667
diff --git a/Bindings/input/ti,palmas-pwrbutton.txt b/Bindings/input/ti,palmas-pwrbutton.txt
new file mode 100644
index 000000000000..a3dde8c30e67
--- /dev/null
+++ b/Bindings/input/ti,palmas-pwrbutton.txt
@@ -0,0 +1,36 @@
+Texas Instruments Palmas family power button module
+
+This module is part of the Palmas family of PMICs. For more details
+about the whole chip see:
+Documentation/devicetree/bindings/mfd/palmas.txt.
+
+This module provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be one of the following
+   - "ti,palmas-pwrbutton": For Palmas compatible power on button
+- interrupt-parent: Parent interrupt device, must be handle of palmas node.
+- interrupts: Interrupt number of power button submodule on device.
+
+Optional Properties:
+
+- ti,palmas-long-press-seconds: Duration in seconds which the power
+  button should be kept pressed for Palmas to power off automatically.
+  NOTE: This depends on OTP support and POWERHOLD signal configuration
+  on platform. Valid values are 6, 8, 10 and 12.
+- ti,palmas-pwron-debounce-milli-seconds: Duration in milliseconds
+  which the power button should be kept pressed for Palmas to register
+  a press for debouncing purposes. NOTE: This depends on specific
+  Palmas variation capability. Valid values are 15, 100, 500 and 1000.
+
+Example:
+
+&palmas {
+	palmas_pwr_button: pwrbutton {
+		compatible = "ti,palmas-pwrbutton";
+		interrupt-parent = <&tps659038>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		ti,palmas-long-press-seconds = <12>;
+		ti,palmas-pwron-debounce-milli-seconds = <15>;
+	};
+};
diff --git a/Bindings/input/touchscreen/sun4i.txt b/Bindings/input/touchscreen/sun4i.txt
index aef57791f40b..433332d3b2ba 100644
--- a/Bindings/input/touchscreen/sun4i.txt
+++ b/Bindings/input/touchscreen/sun4i.txt
@@ -2,9 +2,10 @@ sun4i resistive touchscreen controller
 --------------------------------------
 
 Required properties:
- - compatible: "allwinner,sun4i-a10-ts"
+ - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun6i-a31-ts"
  - reg: mmio address range of the chip
  - interrupts: interrupt to which the chip is connected
+ - #thermal-sensor-cells: shall be 0
 
 Optional properties:
  - allwinner,ts-attached: boolean indicating that an actual touchscreen is
@@ -17,4 +18,5 @@ Example:
 		reg = <0x01c25000 0x100>;
 		interrupts = <29>;
 		allwinner,ts-attached;
+		#thermal-sensor-cells = <0>;
 	};
diff --git a/Bindings/input/touchscreen/ti-tsc-adc.txt b/Bindings/input/touchscreen/ti-tsc-adc.txt
index 878549ba814d..6c4fb34823d3 100644
--- a/Bindings/input/touchscreen/ti-tsc-adc.txt
+++ b/Bindings/input/touchscreen/ti-tsc-adc.txt
@@ -28,6 +28,20 @@ Required properties:
 	ti,adc-channels: List of analog inputs available for ADC.
 			 AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
 
+Optional properties:
+- child "tsc"
+	ti,charge-delay: Length of touch screen charge delay step in terms of
+			 ADC clock cycles. Charge delay value should be large
+			 in order to avoid false pen-up events. This value
+			 effects the overall sampling speed, hence need to be
+			 kept as low as possible, while avoiding false pen-up
+			 event. Start from a lower value, say 0x400, and
+			 increase value until false pen-up events are avoided.
+			 The pen-up detection happens immediately after the
+			 charge step, so this does in fact function as a
+			 hardware knob for adjusting the amount of "settling
+			 time".
+
 Example:
 	tscadc: tscadc@44e0d000 {
 		compatible = "ti,am3359-tscadc";
@@ -36,6 +50,7 @@ Example:
 			ti,x-plate-resistance = <200>;
 			ti,coordiante-readouts = <5>;
 			ti,wire-config = <0x00 0x11 0x22 0x33>;
+			ti,charge-delay = <0x400>;
 		};
 
 		adc {
diff --git a/Bindings/input/tps65218-pwrbutton.txt b/Bindings/input/tps65218-pwrbutton.txt
new file mode 100644
index 000000000000..e30e0b93f2b3
--- /dev/null
+++ b/Bindings/input/tps65218-pwrbutton.txt
@@ -0,0 +1,17 @@
+Texas Instruments TPS65218 power button
+
+This driver provides a simple power button event via an Interrupt.
+
+Required properties:
+- compatible: should be "ti,tps65218-pwrbutton"
+- interrupts: should be one of the following
+   - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
+
+Example:
+
+&tps {
+	power-button {
+		compatible = "ti,tps65218-pwrbutton";
+		interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+	};
+};
diff --git a/Bindings/interrupt-controller/atmel,aic.txt b/Bindings/interrupt-controller/atmel,aic.txt
index 2742e9cfd6b1..f292917fa00d 100644
--- a/Bindings/interrupt-controller/atmel,aic.txt
+++ b/Bindings/interrupt-controller/atmel,aic.txt
@@ -2,7 +2,7 @@
 
 Required properties:
 - compatible: Should be "atmel,<chip>-aic"
-  <chip> can be "at91rm9200" or "sama5d3"
+  <chip> can be "at91rm9200", "sama5d3" or "sama5d4"
 - interrupt-controller: Identifies the node as an interrupt controller.
 - interrupt-parent: For single AIC system, it is an empty property.
 - #interrupt-cells: The number of cells to define the interrupts. It should be 3.
diff --git a/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
new file mode 100644
index 000000000000..bae1f2187226
--- /dev/null
+++ b/Bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
@@ -0,0 +1,96 @@
+Broadcom BCM7120-style Level 2 interrupt controller
+
+This interrupt controller hardware is a second level interrupt controller that
+is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+platforms. It can be found on BCM7xxx products starting with BCM7120.
+
+Such an interrupt controller has the following hardware design:
+
+- outputs multiple interrupts signals towards its interrupt controller parent
+
+- controls how some of the interrupts will be flowing, whether they will
+  directly output an interrupt signal towards the interrupt controller parent,
+  or if they will output an interrupt signal at this 2nd level interrupt
+  controller, in particular for UARTs
+
+- typically has one 32-bit enable word and one 32-bit status word, but on
+  some hardware may have more than one enable/status pair
+
+- no atomic set/clear operations
+
+- not all bits within the interrupt controller actually map to an interrupt
+
+The typical hardware layout for this controller is represented below:
+
+2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
+
+0 -----[ MUX ] ------------|==========> GIC interrupt 75
+          \-----------\
+                       |
+1 -----[ MUX ] --------)---|==========> GIC interrupt 76
+          \------------|
+                       |
+2 -----[ MUX ] --------)---|==========> GIC interrupt 77
+          \------------|
+                       |
+3 ---------------------|
+4 ---------------------|
+5 ---------------------|
+7 ---------------------|---|===========> GIC interrupt 66
+9 ---------------------|
+10 --------------------|
+11 --------------------/
+
+6 ------------------------\
+                           |===========> GIC interrupt 64
+8 ------------------------/
+
+12 ........................ X
+13 ........................ X 		(not connected)
+..
+31 ........................ X
+
+Required properties:
+
+- compatible: should be "brcm,bcm7120-l2-intc"
+- reg: specifies the base physical address and size of the registers;
+  multiple pairs may be specified, with the first pair handling IRQ offsets
+  0..31 and the second pair handling 32..63
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+  source, should be 1.
+- interrupt-parent: specifies the phandle to the parent interrupt controller
+  this one is cascaded from
+- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
+  node, valid values depend on the type of parent interrupt controller
+- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
+  are wired to this 2nd level interrupt controller, and how they match their
+  respective interrupt parents. Should match exactly the number of interrupts
+  specified in the 'interrupts' property, multiplied by the number of
+  enable/status register pairs implemented by this controller.  For
+  multiple parent IRQs with multiple enable/status words, this looks like:
+  <irq0_w0 irq0_w1 irq1_w0 irq1_w1 ...>
+
+Optional properties:
+
+- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
+  wakeup source for system suspend/resume.
+
+- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which
+  have a mux gate, typically UARTs. Setting these bits will make their
+  respective interrupt outputs bypass this 2nd level interrupt controller
+  completely; it is completely transparent for the interrupt controller
+  parent. This should have one 32-bit word per enable/status pair.
+
+Example:
+
+irq0_intc: interrupt-controller@f0406800 {
+	compatible = "brcm,bcm7120-l2-intc";
+	interrupt-parent = <&intc>;
+	#interrupt-cells = <1>;
+	reg = <0xf0406800 0x8>;
+	interrupt-controller;
+	interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
+	brcm,int-map-mask = <0xeb8>, <0x140>;
+	brcm,int-fwd-mask = <0x7>;
+};
diff --git a/Bindings/interrupt-controller/digicolor-ic.txt b/Bindings/interrupt-controller/digicolor-ic.txt
new file mode 100644
index 000000000000..42d41ec84c7b
--- /dev/null
+++ b/Bindings/interrupt-controller/digicolor-ic.txt
@@ -0,0 +1,21 @@
+Conexant Digicolor Interrupt Controller
+
+Required properties:
+
+- compatible : should be "cnxt,cx92755-ic"
+- reg : Specifies base physical address and size of the interrupt controller
+  registers (IC) area
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+- syscon: A phandle to the syscon node describing UC registers
+
+Example:
+
+	intc: interrupt-controller@f0000040 {
+		compatible = "cnxt,cx92755-ic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf0000040 0x40>;
+		syscon = <&uc_regs>;
+	};
diff --git a/Bindings/interrupt-controller/interrupts.txt b/Bindings/interrupt-controller/interrupts.txt
index ce6a1a072028..8a3c40829899 100644
--- a/Bindings/interrupt-controller/interrupts.txt
+++ b/Bindings/interrupt-controller/interrupts.txt
@@ -30,10 +30,6 @@ should only be used when a device has multiple interrupt parents.
   Example:
 	interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
 
-A device node may contain either "interrupts" or "interrupts-extended", but not
-both. If both properties are present, then the operating system should log an
-error and use only the data in "interrupts".
-
 2) Interrupt controller nodes
 -----------------------------
 
diff --git a/Bindings/interrupt-controller/mips-gic.txt b/Bindings/interrupt-controller/mips-gic.txt
new file mode 100644
index 000000000000..5a65478e5d40
--- /dev/null
+++ b/Bindings/interrupt-controller/mips-gic.txt
@@ -0,0 +1,55 @@
+MIPS Global Interrupt Controller (GIC)
+
+The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
+It also supports local (per-processor) interrupts and software-generated
+interrupts which can be used as IPIs.  The GIC also includes a free-running
+global timer, per-CPU count/compare timers, and a watchdog.
+
+Required properties:
+- compatible : Should be "mti,gic".
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt specifier.  Should be 3.
+  - The first cell is the type of interrupt, local or shared.
+    See <include/dt-bindings/interrupt-controller/mips-gic.h>.
+  - The second cell is the GIC interrupt number.
+  - The third cell encodes the interrupt flags.
+    See <include/dt-bindings/interrupt-controller/irq.h> for a list of valid
+    flags.
+
+Optional properties:
+- reg : Base address and length of the GIC registers.  If not present,
+  the base address reported by the hardware GCR_GIC_BASE will be used.
+- mti,reserved-cpu-vectors : Specifies the list of CPU interrupt vectors
+  to which the GIC may not route interrupts.  Valid values are 2 - 7.
+  This property is ignored if the CPU is started in EIC mode.
+
+Required properties for timer sub-node:
+- compatible : Should be "mti,gic-timer".
+- interrupts : Interrupt for the GIC local timer.
+- clock-frequency : Clock frequency at which the GIC timers operate.
+
+Example:
+
+	gic: interrupt-controller@1bdc0000 {
+		compatible = "mti,gic";
+		reg = <0x1bdc0000 0x20000>;
+
+		interrupt-controller;
+		#interrupt-cells = <3>;
+
+		mti,reserved-cpu-vectors = <7>;
+
+		timer {
+			compatible = "mti,gic-timer";
+			interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+	uart@18101400 {
+		...
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};
diff --git a/Bindings/interrupt-controller/renesas,intc-irqpin.txt b/Bindings/interrupt-controller/renesas,intc-irqpin.txt
index 1f8b0c507c26..4f7946ae8adc 100644
--- a/Bindings/interrupt-controller/renesas,intc-irqpin.txt
+++ b/Bindings/interrupt-controller/renesas,intc-irqpin.txt
@@ -2,7 +2,18 @@ DT bindings for the R-/SH-Mobile irqpin controller
 
 Required properties:
 
-- compatible: has to be "renesas,intc-irqpin"
+- compatible: has to be "renesas,intc-irqpin-<soctype>", "renesas,intc-irqpin"
+  as fallback.
+  Examples with soctypes are:
+    - "renesas,intc-irqpin-r8a7740" (R-Mobile A1)
+    - "renesas,intc-irqpin-r8a7778" (R-Car M1A)
+    - "renesas,intc-irqpin-r8a7779" (R-Car H1)
+    - "renesas,intc-irqpin-sh73a0" (SH-Mobile AG5)
+
+- reg: Base address and length of each register bank used by the external
+  IRQ pins driven by the interrupt controller hardware module. The base
+  addresses, length and number of required register banks varies with soctype.
+
 - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
   interrupts.txt in this directory
 
diff --git a/Bindings/interrupt-controller/renesas,irqc.txt b/Bindings/interrupt-controller/renesas,irqc.txt
new file mode 100644
index 000000000000..1a88e62228e5
--- /dev/null
+++ b/Bindings/interrupt-controller/renesas,irqc.txt
@@ -0,0 +1,32 @@
+DT bindings for the R-Mobile/R-Car interrupt controller
+
+Required properties:
+
+- compatible: has to be "renesas,irqc-<soctype>", "renesas,irqc" as fallback.
+  Examples with soctypes are:
+    - "renesas,irqc-r8a73a4" (R-Mobile AP6)
+    - "renesas,irqc-r8a7790" (R-Car H2)
+    - "renesas,irqc-r8a7791" (R-Car M2-W)
+    - "renesas,irqc-r8a7792" (R-Car V2H)
+    - "renesas,irqc-r8a7793" (R-Car M2-N)
+    - "renesas,irqc-r8a7794" (R-Car E2)
+- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
+  interrupts.txt in this directory
+
+Optional properties:
+
+- any properties, listed in interrupts.txt, and any standard resource allocation
+  properties
+
+Example:
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc-r8a7790", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Bindings/interrupt-controller/ti,keystone-irq.txt b/Bindings/interrupt-controller/ti,keystone-irq.txt
new file mode 100644
index 000000000000..d9bb106bdd16
--- /dev/null
+++ b/Bindings/interrupt-controller/ti,keystone-irq.txt
@@ -0,0 +1,36 @@
+Keystone 2 IRQ controller IP
+
+On Keystone SOCs, DSP cores can send interrupts to ARM
+host using the IRQ controller IP. It provides 28 IRQ signals to ARM.
+The IRQ handler running on HOST OS can identify DSP signal source by
+analyzing SRCCx bits in IPCARx registers. This is one of the component
+used by the IPC mechanism used on Keystone SOCs.
+
+Required Properties:
+- compatible: should be "ti,keystone-irq"
+- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to
+			access device control registers and the offset inside
+			device control registers range.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+					 source should be 1.
+- interrupts: interrupt reference to primary interrupt controller
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+	kirq0: keystone_irq0@026202a0 {
+		compatible = "ti,keystone-irq";
+		ti,syscon-dev = <&devctrl 0x2a0>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	dsp0: dsp0 {
+		compatible = "linux,rproc-user";
+		...
+		interrupt-parent = <&kirq0>;
+		interrupts = <10 2>;
+	};
diff --git a/Bindings/interrupt-controller/ti,omap-intc-irq.txt b/Bindings/interrupt-controller/ti,omap-intc-irq.txt
new file mode 100644
index 000000000000..38ce5d037722
--- /dev/null
+++ b/Bindings/interrupt-controller/ti,omap-intc-irq.txt
@@ -0,0 +1,28 @@
+Omap2/3 intc controller
+
+On TI omap2 and 3 the intc interrupt controller can provide
+96 or 128 IRQ signals to the ARM host depending on the SoC.
+
+Required Properties:
+- compatible: should be one of
+			"ti,omap2-intc"
+			"ti,omap3-intc"
+			"ti,dm814-intc"
+			"ti,dm816-intc"
+			"ti,am33xx-intc"
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode interrupt
+		     source, should be 1 for intc
+- interrupts: interrupt reference to primary interrupt controller
+
+Please refer to interrupts.txt in this directory for details of the common
+Interrupt Controllers bindings used by client devices.
+
+Example:
+	intc: interrupt-controller@48200000 {
+		compatible = "ti,omap3-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x48200000 0x1000>;
+	};
diff --git a/Bindings/iommu/arm,smmu.txt b/Bindings/iommu/arm,smmu.txt
index 2d0f7cd867ea..06760503a819 100644
--- a/Bindings/iommu/arm,smmu.txt
+++ b/Bindings/iommu/arm,smmu.txt
@@ -14,6 +14,7 @@ conditions.
                         "arm,smmu-v1"
                         "arm,smmu-v2"
                         "arm,mmu-400"
+                        "arm,mmu-401"
                         "arm,mmu-500"
 
                   depending on the particular implementation and/or the
diff --git a/Bindings/iommu/renesas,ipmmu-vmsa.txt b/Bindings/iommu/renesas,ipmmu-vmsa.txt
new file mode 100644
index 000000000000..cd29083e16ec
--- /dev/null
+++ b/Bindings/iommu/renesas,ipmmu-vmsa.txt
@@ -0,0 +1,41 @@
+* Renesas VMSA-Compatible IOMMU
+
+The IPMMU is an IOMMU implementation compatible with the ARM VMSA page tables.
+It provides address translation for bus masters outside of the CPU, each
+connected to the IPMMU through a port called micro-TLB.
+
+
+Required Properties:
+
+  - compatible: Must contain "renesas,ipmmu-vmsa".
+  - reg: Base address and size of the IPMMU registers.
+  - interrupts: Specifiers for the MMU fault interrupts. For instances that
+    support secure mode two interrupts must be specified, for non-secure and
+    secure mode, in that order. For instances that don't support secure mode a
+    single interrupt must be specified.
+
+  - #iommu-cells: Must be 1.
+
+Each bus master connected to an IPMMU must reference the IPMMU in its device
+node with the following property:
+
+  - iommus: A reference to the IPMMU in two cells. The first cell is a phandle
+    to the IPMMU and the second cell the number of the micro-TLB that the
+    device is connected to.
+
+
+Example: R8A7791 IPMMU-MX and VSP1-D0 bus master
+
+	ipmmu_mx: mmu@fe951000 {
+		compatible = "renasas,ipmmu-vmsa";
+		reg = <0 0xfe951000 0 0x1000>;
+		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 221 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+	};
+
+	vsp1@fe928000 {
+		...
+		iommus = <&ipmmu_mx 13>;
+		...
+	};
diff --git a/Bindings/iommu/rockchip,iommu.txt b/Bindings/iommu/rockchip,iommu.txt
new file mode 100644
index 000000000000..9a55ac3735e5
--- /dev/null
+++ b/Bindings/iommu/rockchip,iommu.txt
@@ -0,0 +1,26 @@
+Rockchip IOMMU
+==============
+
+A Rockchip DRM iommu translates io virtual addresses to physical addresses for
+its master device.  Each slave device is bound to a single master device, and
+shares its clocks, power domain and irq.
+
+Required properties:
+- compatible      : Should be "rockchip,iommu"
+- reg             : Address space for the configuration registers
+- interrupts      : Interrupt specifier for the IOMMU instance
+- interrupt-names : Interrupt name for the IOMMU instance
+- #iommu-cells    : Should be <0>.  This indicates the iommu is a
+                    "single-master" device, and needs no additional information
+                    to associate with its master device.  See:
+                    Documentation/devicetree/bindings/iommu/iommu.txt
+
+Example:
+
+	vopl_mmu: iommu@ff940300 {
+		compatible = "rockchip,iommu";
+		reg = <0xff940300 0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vopl_mmu";
+		#iommu-cells = <0>;
+	};
diff --git a/Bindings/iommu/samsung,sysmmu.txt b/Bindings/iommu/samsung,sysmmu.txt
index 6fa4c737af23..729543c47046 100644
--- a/Bindings/iommu/samsung,sysmmu.txt
+++ b/Bindings/iommu/samsung,sysmmu.txt
@@ -45,7 +45,7 @@ Required properties:
 	       Exynos4 SoCs, there needs no "master" clock.
 	       Exynos5 SoCs, some System MMUs must have "master" clocks.
 - clocks: Required if the System MMU is needed to gate its clock.
-- samsung,power-domain: Required if the System MMU is needed to gate its power.
+- power-domains: Required if the System MMU is needed to gate its power.
 	  Please refer to the following document:
 	  Documentation/devicetree/bindings/arm/exynos/power_domain.txt
 
@@ -54,7 +54,7 @@ Examples:
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 	};
@@ -66,5 +66,5 @@ Examples:
 		interrupts = <2 0>;
 		clock-names = "sysmmu", "master";
 		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		samsung,power-domain = <&pd_gsc>;
+		power-domains = <&pd_gsc>;
 	};
diff --git a/Bindings/leds/common.txt b/Bindings/leds/common.txt
index 2d88816dd550..34811c57db69 100644
--- a/Bindings/leds/common.txt
+++ b/Bindings/leds/common.txt
@@ -1,6 +1,19 @@
 Common leds properties.
 
+LED and flash LED devices provide the same basic functionality as current
+regulators, but extended with LED and flash LED specific features like
+blinking patterns, flash timeout, flash faults and external flash strobe mode.
+
+Many LED devices expose more than one current output that can be connected
+to one or more discrete LED component. Since the arrangement of connections
+can influence the way of the LED device initialization, the LED components
+have to be tightly coupled with the LED device binding. They are represented
+by child nodes of the parent LED device binding.
+
 Optional properties for child nodes:
+- led-sources : List of device current outputs the LED is connected to. The
+		outputs are identified by the numbers that must be defined
+		in the LED device binding documentation.
 - label : The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).
 
@@ -14,6 +27,15 @@ Optional properties for child nodes:
      "ide-disk" - LED indicates disk activity
      "timer" - LED flashes at a fixed, configurable rate
 
+- max-microamp : maximum intensity in microamperes of the LED
+		 (torch LED for flash devices)
+- flash-max-microamp : maximum intensity in microamperes of the
+                       flash LED; it is mandatory if the LED should
+		       support the flash mode
+- flash-timeout-us : timeout in microseconds after which the flash
+                     LED is turned off
+
+
 Examples:
 
 system-status {
@@ -21,3 +43,11 @@ system-status {
 	linux,default-trigger = "heartbeat";
 	...
 };
+
+camera-flash {
+	label = "Flash";
+	led-sources = <0>, <1>;
+	max-microamp = <50000>;
+	flash-max-microamp = <320000>;
+	flash-timeout-us = <500000>;
+};
diff --git a/Bindings/leds/leds-lp8860.txt b/Bindings/leds/leds-lp8860.txt
new file mode 100644
index 000000000000..aad38dd94d4b
--- /dev/null
+++ b/Bindings/leds/leds-lp8860.txt
@@ -0,0 +1,29 @@
+* Texas Instruments - lp8860 4-Channel LED Driver
+
+The LP8860-Q1 is an high-efficiency LED
+driver with boost controller. It has 4 high-precision
+current sinks that can be controlled by a PWM input
+signal, a SPI/I2C master, or both.
+
+Required properties:
+	- compatible:
+		"ti,lp8860"
+	- reg -  I2C slave address
+	- label - Used for naming LEDs
+
+Optional properties:
+	- enable-gpio - gpio pin to enable/disable the device.
+	- supply - "vled" - LED supply
+
+Example:
+
+leds: leds@6 {
+	compatible = "ti,lp8860";
+	reg = <0x2d>;
+	label = "display_cluster";
+	enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	vled-supply = <&vbatt>;
+}
+
+For more product information please see the link below:
+http://www.ti.com/product/lp8860-q1
diff --git a/Bindings/leds/register-bit-led.txt b/Bindings/leds/register-bit-led.txt
new file mode 100644
index 000000000000..379cefdc0bda
--- /dev/null
+++ b/Bindings/leds/register-bit-led.txt
@@ -0,0 +1,99 @@
+Device Tree Bindings for Register Bit LEDs
+
+Register bit leds are used with syscon multifunctional devices
+where single bits in a certain register can turn on/off a
+single LED. The register bit LEDs appear as children to the
+syscon device, with the proper compatible string. For the
+syscon bindings see:
+Documentation/devicetree/bindings/mfd/syscon.txt
+
+Each LED is represented as a sub-node of the syscon device. Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+
+Required properties:
+- compatible : must be "register-bit-led"
+- offset : register offset to the register controlling this LED
+- mask : bit mask for the bit controlling this LED in the register
+  typically 0x01, 0x02, 0x04 ...
+
+Optional properties:
+- label : (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED. Valid
+  values are "on", "off", and "keep". If the LED is already on or off
+  and the default-state property is set the to same value, then no
+  glitch should be produced where the LED momentarily turns off (or
+  on). The "keep" setting will keep the LED at whatever its current
+  state is, without producing a glitch.  The default is off if this
+  property is not present.
+
+Example:
+
+syscon: syscon@10000000 {
+	compatible = "arm,realview-pb1176-syscon", "syscon";
+	reg = <0x10000000 0x1000>;
+
+	led@08.0 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x01>;
+		label = "versatile:0";
+		linux,default-trigger = "heartbeat";
+		default-state = "on";
+	};
+	led@08.1 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x02>;
+		label = "versatile:1";
+		linux,default-trigger = "mmc0";
+		default-state = "off";
+	};
+	led@08.2 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x04>;
+		label = "versatile:2";
+		linux,default-trigger = "cpu0";
+		default-state = "off";
+	};
+	led@08.3 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x08>;
+		label = "versatile:3";
+		default-state = "off";
+	};
+	led@08.4 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x10>;
+		label = "versatile:4";
+		default-state = "off";
+	};
+	led@08.5 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x20>;
+		label = "versatile:5";
+		default-state = "off";
+	};
+	led@08.6 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x40>;
+		label = "versatile:6";
+		default-state = "off";
+	};
+	led@08.7 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x80>;
+		label = "versatile:7";
+		default-state = "off";
+	};
+};
diff --git a/Bindings/mailbox/altera-mailbox.txt b/Bindings/mailbox/altera-mailbox.txt
new file mode 100644
index 000000000000..c2619797ce0c
--- /dev/null
+++ b/Bindings/mailbox/altera-mailbox.txt
@@ -0,0 +1,49 @@
+Altera Mailbox Driver
+=====================
+
+Required properties:
+- compatible :	"altr,mailbox-1.0".
+- reg : 	physical base address of the mailbox and length of
+		memory mapped region.
+- #mbox-cells:	Common mailbox binding property to identify the number
+		of cells required for the mailbox specifier. Should be 1.
+
+Optional properties:
+- interrupt-parent :	interrupt source phandle.
+- interrupts :		interrupt number. The interrupt specifier format
+			depends on the interrupt controller parent.
+
+Example:
+	mbox_tx: mailbox@0x100 {
+		compatible = "altr,mailbox-1.0";
+		reg = <0x100 0x8>;
+		interrupt-parent = < &gic_0 >;
+		interrupts = <5>;
+		#mbox-cells = <1>;
+	};
+
+	mbox_rx: mailbox@0x200 {
+		compatible = "altr,mailbox-1.0";
+		reg = <0x200 0x8>;
+		interrupt-parent = < &gic_0 >;
+		interrupts = <6>;
+		#mbox-cells = <1>;
+	};
+
+Mailbox client
+===============
+"mboxes" and the optional "mbox-names" (please see
+Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value
+of the mboxes property should contain a phandle to the mailbox controller
+device node and second argument is the channel index. It must be 0 (hardware
+support only one channel).The equivalent "mbox-names" property value can be
+used to give a name to the communication channel to be used by the client user.
+
+Example:
+	mclient0: mclient0@0x400 {
+		compatible = "client-1.0";
+		reg = <0x400 0x10>;
+		mbox-names = "mbox-tx", "mbox-rx";
+		mboxes = <&mbox_tx 0>,
+			 <&mbox_rx 0>;
+	};
diff --git a/Bindings/mailbox/mailbox.txt b/Bindings/mailbox/mailbox.txt
new file mode 100644
index 000000000000..1a2cd3d266db
--- /dev/null
+++ b/Bindings/mailbox/mailbox.txt
@@ -0,0 +1,38 @@
+* Generic Mailbox Controller and client driver bindings
+
+Generic binding to provide a way for Mailbox controller drivers to
+assign appropriate mailbox channel to client drivers.
+
+* Mailbox Controller
+
+Required property:
+- #mbox-cells: Must be at least 1. Number of cells in a mailbox
+		specifier.
+
+Example:
+	mailbox: mailbox {
+		...
+		#mbox-cells = <1>;
+	};
+
+
+* Mailbox Client
+
+Required property:
+- mboxes: List of phandle and mailbox channel specifiers.
+
+Optional property:
+- mbox-names: List of identifier strings for each mailbox channel
+		required by the client. The use of this property
+		is discouraged in favor of using index in list of
+		'mboxes' while requesting a mailbox. Instead the
+		platforms may define channel indices, in DT headers,
+		to something legible.
+
+Example:
+	pwr_cntrl: power {
+		...
+		mbox-names = "pwr-ctrl", "rpc";
+		mboxes = <&mailbox 0
+			&mailbox 1>;
+	};
diff --git a/Bindings/mailbox/omap-mailbox.txt b/Bindings/mailbox/omap-mailbox.txt
new file mode 100644
index 000000000000..d1a043339c11
--- /dev/null
+++ b/Bindings/mailbox/omap-mailbox.txt
@@ -0,0 +1,131 @@
+OMAP2+ Mailbox Driver
+=====================
+
+The OMAP mailbox hardware facilitates communication between different processors
+using a queued mailbox interrupt mechanism. The IP block is external to the
+various processor subsystems and is connected on an interconnect bus. The
+communication is achieved through a set of registers for message storage and
+interrupt configuration registers.
+
+Each mailbox IP block has a certain number of h/w fifo queues and output
+interrupt lines. An output interrupt line is routed to an interrupt controller
+within a processor subsystem, and there can be more than one line going to a
+specific processor's interrupt controller. The interrupt line connections are
+fixed for an instance and are dictated by the IP integration into the SoC
+(excluding the SoCs that have a Interrupt Crossbar IP). Each interrupt line is
+programmable through a set of interrupt configuration registers, and have a rx
+and tx interrupt source per h/w fifo. Communication between different processors
+is achieved through the appropriate programming of the rx and tx interrupt
+sources on the appropriate interrupt lines.
+
+The number of h/w fifo queues and interrupt lines dictate the usable registers.
+All the current OMAP SoCs except for the newest DRA7xx SoC has a single IP
+instance. DRA7xx has multiple instances with different number of h/w fifo queues
+and interrupt lines between different instances. The interrupt lines can also be
+routed to different processor sub-systems on DRA7xx as they are routed through
+the Crossbar, a kind of interrupt router/multiplexer.
+
+Mailbox Device Node:
+====================
+A Mailbox device node is used to represent a Mailbox IP instance within a SoC.
+The sub-mailboxes are represented as child nodes of this parent node.
+
+Required properties:
+--------------------
+- compatible:		Should be one of the following,
+			    "ti,omap2-mailbox" for OMAP2420, OMAP2430 SoCs
+			    "ti,omap3-mailbox" for OMAP3430, OMAP3630 SoCs
+			    "ti,omap4-mailbox" for OMAP44xx, OMAP54xx, AM33xx,
+						   AM43xx and DRA7xx SoCs
+- reg:			Contains the mailbox register address range (base
+			address and length)
+- interrupts:		Contains the interrupt information for the mailbox
+			device. The format is dependent on which interrupt
+			controller the OMAP device uses
+- ti,hwmods:		Name of the hwmod associated with the mailbox
+- #mbox-cells:		Common mailbox binding property to identify the number
+			of cells required for the mailbox specifier. Should be
+			1
+- ti,mbox-num-users:	Number of targets (processor devices) that the mailbox
+			device can interrupt
+- ti,mbox-num-fifos:	Number of h/w fifo queues within the mailbox IP block
+
+Child Nodes:
+============
+A child node is used for representing the actual sub-mailbox device that is
+used for the communication between the host processor and a remote processor.
+Each child node should have a unique node name across all the different
+mailbox device nodes.
+
+Required properties:
+--------------------
+- ti,mbox-tx:		sub-mailbox descriptor property defining a Tx fifo
+- ti,mbox-rx:		sub-mailbox descriptor property defining a Rx fifo
+
+Sub-mailbox Descriptor Data
+---------------------------
+Each of the above ti,mbox-tx and ti,mbox-rx properties should have 3 cells of
+data that represent the following:
+    Cell #1 (fifo_id) - mailbox fifo id used either for transmitting
+                        (ti,mbox-tx) or for receiving (ti,mbox-rx)
+    Cell #2 (irq_id)  - irq identifier index number to use from the parent's
+                        interrupts data. Should be 0 for most of the cases, a
+                        positive index value is seen only on mailboxes that have
+                        multiple interrupt lines connected to the MPU processor.
+    Cell #3 (usr_id)  - mailbox user id for identifying the interrupt line
+                        associated with generating a tx/rx fifo interrupt.
+
+Mailbox Users:
+==============
+A device needing to communicate with a target processor device should specify
+them using the common mailbox binding properties, "mboxes" and the optional
+"mbox-names" (please see Documentation/devicetree/bindings/mailbox/mailbox.txt
+for details). Each value of the mboxes property should contain a phandle to the
+mailbox controller device node and an args specifier that will be the phandle to
+the intended sub-mailbox child node to be used for communication. The equivalent
+"mbox-names" property value can be used to give a name to the communication channel
+to be used by the client user.
+
+
+Example:
+--------
+
+/* OMAP4 */
+mailbox: mailbox@4a0f4000 {
+	compatible = "ti,omap4-mailbox";
+	reg = <0x4a0f4000 0x200>;
+	interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+	ti,hwmods = "mailbox";
+	#mbox-cells = <1>;
+	ti,mbox-num-users = <3>;
+	ti,mbox-num-fifos = <8>;
+	mbox_ipu: mbox_ipu {
+		ti,mbox-tx = <0 0 0>;
+		ti,mbox-rx = <1 0 0>;
+	};
+	mbox_dsp: mbox_dsp {
+		ti,mbox-tx = <3 0 0>;
+		ti,mbox-rx = <2 0 0>;
+	};
+};
+
+dsp {
+	...
+	mboxes = <&mailbox &mbox_dsp>;
+	...
+};
+
+/* AM33xx */
+mailbox: mailbox@480C8000 {
+	compatible = "ti,omap4-mailbox";
+	reg = <0x480C8000 0x200>;
+	interrupts = <77>;
+	ti,hwmods = "mailbox";
+	#mbox-cells = <1>;
+	ti,mbox-num-users = <4>;
+	ti,mbox-num-fifos = <8>;
+	mbox_wkupm3: wkup_m3 {
+		ti,mbox-tx = <0 0 0>;
+		ti,mbox-rx = <0 0 3>;
+	};
+};
diff --git a/Bindings/media/atmel-isi.txt b/Bindings/media/atmel-isi.txt
index 17e71b7b44c6..251f008f220c 100644
--- a/Bindings/media/atmel-isi.txt
+++ b/Bindings/media/atmel-isi.txt
@@ -38,7 +38,7 @@ Example:
 
 	i2c1: i2c@f0018000 {
 		ov2640: camera@0x30 {
-			compatible = "omnivision,ov2640";
+			compatible = "ovti,ov2640";
 			reg = <0x30>;
 
 			port {
diff --git a/Bindings/media/hix5hd2-ir.txt b/Bindings/media/hix5hd2-ir.txt
new file mode 100644
index 000000000000..fb5e7606643a
--- /dev/null
+++ b/Bindings/media/hix5hd2-ir.txt
@@ -0,0 +1,25 @@
+Device-Tree bindings for hix5hd2 ir IP
+
+Required properties:
+	- compatible: Should contain "hisilicon,hix5hd2-ir".
+	- reg: Base physical address of the controller and length of memory
+	  mapped region.
+	- interrupts: interrupt-specifier for the sole interrupt generated by
+	  the device. The interrupt specifier format depends on the interrupt
+	  controller parent.
+	- clocks: clock phandle and specifier pair.
+	- hisilicon,power-syscon: phandle of syscon used to control power.
+
+Optional properties:
+	- linux,rc-map-name : Remote control map name.
+
+Example node:
+
+	ir: ir@f8001000 {
+		compatible = "hisilicon,hix5hd2-ir";
+		reg = <0xf8001000 0x1000>;
+		interrupts = <0 47 4>;
+		clocks = <&clock HIX5HD2_FIXED_24M>;
+		hisilicon,power-syscon = <&sysctrl>;
+		linux,rc-map-name = "rc-tivo";
+	};
diff --git a/Bindings/media/i2c/nokia,smia.txt b/Bindings/media/i2c/nokia,smia.txt
new file mode 100644
index 000000000000..855e1faf73e2
--- /dev/null
+++ b/Bindings/media/i2c/nokia,smia.txt
@@ -0,0 +1,63 @@
+SMIA/SMIA++ sensor
+
+SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
+defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension
+of that. These definitions are valid for both types of sensors.
+
+More detailed documentation can be found in
+Documentation/devicetree/bindings/media/video-interfaces.txt .
+
+
+Mandatory properties
+--------------------
+
+- compatible: "nokia,smia"
+- reg: I2C address (0x10, or an alternative address)
+- vana-supply: Analogue voltage supply (VANA), typically 2,8 volts (sensor
+  dependent).
+- clocks: External clock to the sensor
+- clock-frequency: Frequency of the external clock to the sensor
+- link-frequencies: List of allowed data link frequencies. An array of
+  64-bit elements.
+
+
+Optional properties
+-------------------
+
+- nokia,nvm-size: The size of the NVM, in bytes. If the size is not given,
+  the NVM contents will not be read.
+- reset-gpios: XSHUTDOWN GPIO
+
+
+Endpoint node mandatory properties
+----------------------------------
+
+- clock-lanes: <0>
+- data-lanes: <1..n>
+- remote-endpoint: A phandle to the bus receiver's endpoint node.
+
+
+Example
+-------
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	smiapp_1: camera@10 {
+		compatible = "nokia,smia";
+		reg = <0x10>;
+		reset-gpios = <&gpio3 20 0>;
+		vana-supply = <&vaux3>;
+		clocks = <&omap3_isp 0>;
+		clock-frequency = <9600000>;
+		nokia,nvm-size = <512>; /* 8 * 64 */
+		link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
+		port {
+			smiapp_1_1: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi2a_ep>;
+			};
+		};
+	};
+};
diff --git a/Bindings/media/meson-ir.txt b/Bindings/media/meson-ir.txt
new file mode 100644
index 000000000000..407848e85f31
--- /dev/null
+++ b/Bindings/media/meson-ir.txt
@@ -0,0 +1,14 @@
+* Amlogic Meson IR remote control receiver
+
+Required properties:
+ - compatible	: should be "amlogic,meson6-ir"
+ - reg		: physical base address and length of the device registers
+ - interrupts	: a single specifier for the interrupt from the device
+
+Example:
+
+	ir-receiver@c8100480 {
+		compatible= "amlogic,meson6-ir";
+		reg = <0xc8100480 0x20>;
+		interrupts = <0 15 1>;
+	};
diff --git a/Bindings/media/rcar_vin.txt b/Bindings/media/rcar_vin.txt
index ba61782c2af9..9dafe6b06cd2 100644
--- a/Bindings/media/rcar_vin.txt
+++ b/Bindings/media/rcar_vin.txt
@@ -6,6 +6,8 @@ family of devices. The current blocks are always slaves and suppot one input
 channel which can be either RGB, YUYV or BT656.
 
  - compatible: Must be one of the following
+   - "renesas,vin-r8a7794" for the R8A7794 device
+   - "renesas,vin-r8a7793" for the R8A7793 device
    - "renesas,vin-r8a7791" for the R8A7791 device
    - "renesas,vin-r8a7790" for the R8A7790 device
    - "renesas,vin-r8a7779" for the R8A7779 device
diff --git a/Bindings/media/s5p-mfc.txt b/Bindings/media/s5p-mfc.txt
index 3e3c5f349570..2d5787eac91a 100644
--- a/Bindings/media/s5p-mfc.txt
+++ b/Bindings/media/s5p-mfc.txt
@@ -28,7 +28,7 @@ Required properties:
 		    for DMA contiguous memory allocation and its size.
 
 Optional properties:
-  - samsung,power-domain : power-domain property defined with a phandle
+  - power-domains : power-domain property defined with a phandle
 			   to respective power domain.
 
 Example:
@@ -38,7 +38,7 @@ mfc: codec@13400000 {
 	compatible = "samsung,mfc-v5";
 	reg = <0x13400000 0x10000>;
 	interrupts = <0 94 0>;
-	samsung,power-domain = <&pd_mfc>;
+	power-domains = <&pd_mfc>;
 	clocks = <&clock 273>;
 	clock-names = "mfc";
 };
diff --git a/Bindings/media/si4713.txt b/Bindings/media/si4713.txt
new file mode 100644
index 000000000000..5ee5552d3465
--- /dev/null
+++ b/Bindings/media/si4713.txt
@@ -0,0 +1,30 @@
+* Silicon Labs FM Radio transmitter
+
+The Silicon Labs Si4713 is an FM radio transmitter with receive power scan
+supporting 76-108 MHz. It includes an RDS encoder and has both, a stereo-analog
+and a digital interface, which supports I2S, left-justified and a custom
+DSP-mode format. It is programmable through an I2C interface.
+
+Required Properties:
+- compatible: Should contain "silabs,si4713"
+- reg: the I2C address of the device
+
+Optional Properties:
+- interrupts-extended: Interrupt specifier for the chips interrupt
+- reset-gpios: GPIO specifier for the chips reset line
+- vdd-supply: phandle for Vdd regulator
+- vio-supply: phandle for Vio regulator
+
+Example:
+
+&i2c2 {
+        fmtx: si4713@63 {
+                compatible = "silabs,si4713";
+                reg = <0x63>;
+
+                interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+                reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+                vio-supply = <&vio>;
+                vdd-supply = <&vaux1>;
+        };
+};
diff --git a/Bindings/media/sunxi-ir.txt b/Bindings/media/sunxi-ir.txt
index 23dd5ad07b7c..1811a067c72c 100644
--- a/Bindings/media/sunxi-ir.txt
+++ b/Bindings/media/sunxi-ir.txt
@@ -1,7 +1,7 @@
 Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
 
 Required properties:
-- compatible	    : should be "allwinner,sun4i-a10-ir";
+- compatible	    : "allwinner,sun4i-a10-ir" or "allwinner,sun5i-a13-ir"
 - clocks	    : list of clock specifiers, corresponding to
 		      entries in clock-names property;
 - clock-names	    : should contain "apb" and "ir" entries;
@@ -10,6 +10,7 @@ Required properties:
 
 Optional properties:
 - linux,rc-map-name : Remote control map name.
+- resets : phandle + reset specifier pair
 
 Example:
 
@@ -17,6 +18,7 @@ ir0: ir@01c21800 {
 	compatible = "allwinner,sun4i-a10-ir";
 	clocks = <&apb0_gates 6>, <&ir0_clk>;
 	clock-names = "apb", "ir";
+	resets = <&apb0_rst 1>;
 	interrupts = <0 5 1>;
 	reg = <0x01C21800 0x40>;
 	linux,rc-map-name = "rc-rc6-mce";
diff --git a/Bindings/media/ti-am437x-vpfe.txt b/Bindings/media/ti-am437x-vpfe.txt
new file mode 100644
index 000000000000..3932e766553a
--- /dev/null
+++ b/Bindings/media/ti-am437x-vpfe.txt
@@ -0,0 +1,61 @@
+Texas Instruments AM437x CAMERA (VPFE)
+--------------------------------------
+
+The Video Processing Front End (VPFE) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect RAW image-sensor modules and video decoders
+to the AM437x device.
+
+Required properties:
+- compatible: must be "ti,am437x-vpfe"
+- reg: physical base address and length of the registers set for the device;
+- interrupts: should contain IRQ line for the VPFE;
+- ti,am437x-vpfe-interface: can be one of the following,
+	0 - Raw Bayer Interface.
+	1 - 8 Bit BT656 Interface.
+	2 - 10 Bit BT656 Interface.
+	3 - YCbCr 8 Bit Interface.
+	4 - YCbCr 16 Bit Interface.
+
+VPFE supports a single port node with parallel bus. It should contain one
+'port' child node with child 'endpoint' node. Please refer to the bindings
+defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+	vpfe: vpfe@f0034000 {
+		compatible = "ti,am437x-vpfe";
+		reg = <0x48328000 0x2000>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&vpfe_pins_default>;
+		pinctrl-1 = <&vpfe_pins_sleep>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vpfe0_ep: endpoint {
+				remote-endpoint = <&ov2659_1>;
+				ti,am437x-vpfe-interface = <0>;
+				bus-width = <8>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+			};
+		};
+	};
+
+	i2c1: i2c@4802a000 {
+
+		ov2659@30 {
+			compatible = "ti,ov2659";
+			reg = <0x30>;
+
+			port {
+				ov2659_1: endpoint {
+					remote-endpoint = <&vpfe0_ep>;
+					bus-width = <8>;
+					mclk-frequency = <12000000>;
+				};
+			};
+	};
diff --git a/Bindings/media/video-interfaces.txt b/Bindings/media/video-interfaces.txt
index ce719f89dd1c..571b4c60665f 100644
--- a/Bindings/media/video-interfaces.txt
+++ b/Bindings/media/video-interfaces.txt
@@ -103,6 +103,9 @@ Optional endpoint properties
   array contains only one entry.
 - clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
   clock mode.
+- link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for
+  instance, this is the actual frequency of the bus, not bits per clock per
+  lane value. An array of 64-bit unsigned integers.
 
 
 Example
@@ -159,7 +162,7 @@ pipelines can be active: ov772x -> ceu0 or imx074 -> csi2 -> ceu0.
 	i2c0: i2c@0xfff20000 {
 		...
 		ov772x_1: camera@0x21 {
-			compatible = "omnivision,ov772x";
+			compatible = "ovti,ov772x";
 			reg = <0x21>;
 			vddio-supply = <&regulator1>;
 			vddcore-supply = <&regulator2>;
diff --git a/Bindings/memory-controllers/mvebu-sdram-controller.txt b/Bindings/memory-controllers/mvebu-sdram-controller.txt
new file mode 100644
index 000000000000..89657d1d4cd4
--- /dev/null
+++ b/Bindings/memory-controllers/mvebu-sdram-controller.txt
@@ -0,0 +1,21 @@
+Device Tree bindings for MVEBU SDRAM controllers
+
+The Marvell EBU SoCs all have a SDRAM controller. The SDRAM controller
+differs from one SoC variant to another, but they also share a number
+of commonalities.
+
+For now, this Device Tree binding documentation only documents the
+Armada XP SDRAM controller.
+
+Required properties:
+
+ - compatible: for Armada XP, "marvell,armada-xp-sdram-controller"
+ - reg: a resource specifier for the register space, which should
+   include all SDRAM controller registers as per the datasheet.
+
+Example:
+
+sdramc@1400 {
+	compatible = "marvell,armada-xp-sdram-controller";
+	reg = <0x1400 0x500>;
+};
diff --git a/Bindings/memory-controllers/nvidia,tegra-mc.txt b/Bindings/memory-controllers/nvidia,tegra-mc.txt
new file mode 100644
index 000000000000..f3db93c85eea
--- /dev/null
+++ b/Bindings/memory-controllers/nvidia,tegra-mc.txt
@@ -0,0 +1,36 @@
+NVIDIA Tegra Memory Controller device tree bindings
+===================================================
+
+Required properties:
+- compatible: Should be "nvidia,tegra<chip>-mc"
+- reg: Physical base address and length of the controller's registers.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - mc: the module's clock input
+- interrupts: The interrupt outputs from the controller.
+- #iommu-cells: Should be 1. The single cell of the IOMMU specifier defines
+  the SWGROUP of the master.
+
+This device implements an IOMMU that complies with the generic IOMMU binding.
+See ../iommu/iommu.txt for details.
+
+Example:
+--------
+
+	mc: memory-controller@0,70019000 {
+		compatible = "nvidia,tegra124-mc";
+		reg = <0x0 0x70019000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+	};
+
+	sdhci@0,700b0000 {
+		compatible = "nvidia,tegra124-sdhci";
+		...
+		iommus = <&mc TEGRA_SWGROUP_SDMMC1A>;
+	};
diff --git a/Bindings/memory-controllers/renesas-memory-controllers.txt b/Bindings/memory-controllers/renesas-memory-controllers.txt
new file mode 100644
index 000000000000..c64b7925cd09
--- /dev/null
+++ b/Bindings/memory-controllers/renesas-memory-controllers.txt
@@ -0,0 +1,44 @@
+DT bindings for Renesas R-Mobile and SH-Mobile memory controllers
+=================================================================
+
+Renesas R-Mobile and SH-Mobile SoCs contain one or more memory controllers.
+These memory controllers differ from one SoC variant to another, and are called
+by different names ("DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
+(DBSC3)", "SDRAM Bus State Controller (SBSC)").
+
+Currently memory controller device nodes are used only to reference PM
+domains, and prevent these PM domains from being powered down, which would
+crash the system.
+
+As there exist no actual drivers for these controllers yet, these bindings
+should be considered EXPERIMENTAL for now.
+
+Required properties:
+  - compatible: Must be one of the following SoC-specific values:
+		  - "renesas,dbsc-r8a73a4" (R-Mobile APE6)
+		  - "renesas,dbsc3-r8a7740" (R-Mobile A1)
+		  - "renesas,sbsc-sh73a0" (SH-Mobile AG5)
+  - reg: Must contain the base address and length of the memory controller's
+	 registers.
+
+Optional properties:
+  - interrupts: Must contain a list of interrupt specifiers for memory
+		controller interrupts, if available.
+  - interrupts-names: Must contain a list of interrupt names corresponding to
+		      the interrupts in the interrupts property, if available.
+		      Valid interrupt names are:
+			- "sec" (secure interrupt)
+			- "temp" (normal (temperature) interrupt)
+  - power-domains: Must contain a reference to the PM domain that the memory
+		   controller belongs to, if available.
+
+Example:
+
+	sbsc1: memory-controller@fe400000 {
+		compatible = "renesas,sbsc-sh73a0";
+		reg = <0xfe400000 0x400>;
+		interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sec", "temp";
+		power-domains = <&pd_a4bc0>;
+	};
diff --git a/Bindings/memory-controllers/synopsys.txt b/Bindings/memory-controllers/synopsys.txt
new file mode 100644
index 000000000000..f9c6454146b6
--- /dev/null
+++ b/Bindings/memory-controllers/synopsys.txt
@@ -0,0 +1,11 @@
+Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
+
+Required properties:
+ - compatible: Should be 'xlnx,zynq-ddrc-a05'
+ - reg: Base address and size of the controllers memory area
+
+Example:
+	memory-controller@f8006000 {
+		compatible = "xlnx,zynq-ddrc-a05";
+		reg = <0xf8006000 0x1000>;
+	};
diff --git a/Bindings/mfd/arizona.txt b/Bindings/mfd/arizona.txt
index 5c7e7230984a..7bd1273f571a 100644
--- a/Bindings/mfd/arizona.txt
+++ b/Bindings/mfd/arizona.txt
@@ -42,6 +42,13 @@ Optional properties:
     the chip default will be used.  If present exactly five values must
     be specified.
 
+  - wlf,inmode : A list of INn_MODE register values, where n is the number
+    of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
+    2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
+    If present, values must be specified less than or equal to the number of
+    input singals. If values less than the number of input signals, elements
+    that has not been specifed are set to 0 by default.
+
   - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
     they are being externally supplied. As covered in
     Documentation/devicetree/bindings/regulator/regulator.txt
diff --git a/Bindings/mfd/atmel-gpbr.txt b/Bindings/mfd/atmel-gpbr.txt
new file mode 100644
index 000000000000..a28569540683
--- /dev/null
+++ b/Bindings/mfd/atmel-gpbr.txt
@@ -0,0 +1,15 @@
+* Device tree bindings for Atmel GPBR (General Purpose Backup Registers)
+
+The GPBR are a set of battery-backed registers.
+
+Required properties:
+- compatible:		"atmel,at91sam9260-gpbr", "syscon"
+- reg:			contains offset/length value of the GPBR memory
+			region.
+
+Example:
+
+gpbr: gpbr@fffffd50 {
+	compatible = "atmel,at91sam9260-gpbr", "syscon";
+	reg = <0xfffffd50 0x10>;
+};
diff --git a/Bindings/mfd/atmel-hlcdc.txt b/Bindings/mfd/atmel-hlcdc.txt
new file mode 100644
index 000000000000..f64de95a8e8b
--- /dev/null
+++ b/Bindings/mfd/atmel-hlcdc.txt
@@ -0,0 +1,51 @@
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
+
+Required properties:
+ - compatible: value should be one of the following:
+   "atmel,sama5d3-hlcdc"
+ - reg: base address and size of the HLCDC device registers.
+ - clock-names: the name of the 3 clocks requested by the HLCDC device.
+   Should contain "periph_clk", "sys_clk" and "slow_clk".
+ - clocks: should contain the 3 clocks requested by the HLCDC device.
+ - interrupts: should contain the description of the HLCDC interrupt line
+
+The HLCDC IP exposes two subdevices:
+ - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
+ - a Display Controller: see ../drm/atmel-hlcdc-dc.txt
+
+Example:
+
+	hlcdc: hlcdc@f0030000 {
+		compatible = "atmel,sama5d3-hlcdc";
+		reg = <0xf0030000 0x2000>;
+		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+		clock-names = "periph_clk","sys_clk", "slow_clk";
+		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+		status = "disabled";
+
+		hlcdc-display-controller {
+			compatible = "atmel,hlcdc-display-controller";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				hlcdc_panel_output: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+
+		hlcdc_pwm: hlcdc-pwm {
+			compatible = "atmel,hlcdc-pwm";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_pwm>;
+			#pwm-cells = <3>;
+		};
+	};
diff --git a/Bindings/mfd/atmel-matrix.txt b/Bindings/mfd/atmel-matrix.txt
new file mode 100644
index 000000000000..e3ef50ca02a5
--- /dev/null
+++ b/Bindings/mfd/atmel-matrix.txt
@@ -0,0 +1,24 @@
+* Device tree bindings for Atmel Bus Matrix
+
+The Bus Matrix registers are used to configure Atmel SoCs internal bus
+behavior (master/slave priorities, undefined burst length type, ...)
+
+Required properties:
+- compatible:		Should be one of the following
+			"atmel,at91sam9260-matrix", "syscon"
+			"atmel,at91sam9261-matrix", "syscon"
+			"atmel,at91sam9263-matrix", "syscon"
+			"atmel,at91sam9rl-matrix", "syscon"
+			"atmel,at91sam9g45-matrix", "syscon"
+			"atmel,at91sam9n12-matrix", "syscon"
+			"atmel,at91sam9x5-matrix", "syscon"
+			"atmel,sama5d3-matrix", "syscon"
+- reg:			Contains offset/length value of the Bus Matrix
+			memory region.
+
+Example:
+
+matrix: matrix@ffffec00 {
+	compatible = "atmel,sama5d3-matrix", "syscon";
+	reg = <0xffffec00 0x200>;
+};
diff --git a/Bindings/mfd/atmel-smc.txt b/Bindings/mfd/atmel-smc.txt
new file mode 100644
index 000000000000..26eeed373934
--- /dev/null
+++ b/Bindings/mfd/atmel-smc.txt
@@ -0,0 +1,19 @@
+* Device tree bindings for Atmel SMC (Static Memory Controller)
+
+The SMC registers are used to configure Atmel EBI (External Bus Interface)
+to interface with standard memory devices (NAND, NOR, SRAM or specialized
+devices like FPGAs).
+
+Required properties:
+- compatible:		Should be one of the following
+			"atmel,at91sam9260-smc", "syscon"
+			"atmel,sama5d3-smc", "syscon"
+- reg:			Contains offset/length value of the SMC memory
+			region.
+
+Example:
+
+smc: smc@ffffc000 {
+	compatible = "atmel,sama5d3-smc", "syscon";
+	reg = <0xffffc000 0x1000>;
+};
diff --git a/Bindings/mfd/da9063.txt b/Bindings/mfd/da9063.txt
new file mode 100644
index 000000000000..42c6fa6f1c9a
--- /dev/null
+++ b/Bindings/mfd/da9063.txt
@@ -0,0 +1,93 @@
+* Dialog DA9063 Power Management Integrated Circuit (PMIC)
+
+DA9093 consists of a large and varied group of sub-devices (I2C Only):
+
+Device                   Supply Names    Description
+------                   ------------    -----------
+da9063-regulator        :               : LDOs & BUCKs
+da9063-rtc              :               : Real-Time Clock
+da9063-watchdog         :               : Watchdog
+
+======
+
+Required properties:
+
+- compatible : Should be "dlg,da9063"
+- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
+  modified to match the chip's OTP settings).
+- interrupt-parent : Specifies the reference to the interrupt controller for
+  the DA9063.
+- interrupts : IRQ line information.
+- interrupt-controller
+
+Sub-nodes:
+
+- regulators : This node defines the settings for the LDOs and BUCKs. The
+  DA9063 regulators are bound using their names listed below:
+
+    bcore1    : BUCK CORE1
+    bcore2    : BUCK CORE2
+    bpro      : BUCK PRO
+    bmem      : BUCK MEM
+    bio       : BUCK IO
+    bperi     : BUCK PERI
+    ldo1      : LDO_1
+    ldo2      : LDO_2
+    ldo3      : LDO_3
+    ldo4      : LDO_4
+    ldo5      : LDO_5
+    ldo6      : LDO_6
+    ldo7      : LDO_7
+    ldo8      : LDO_8
+    ldo9      : LDO_9
+    ldo10     : LDO_10
+    ldo11     : LDO_11
+
+  The component follows the standard regulator framework and the bindings
+  details of individual regulator device can be found in:
+  Documentation/devicetree/bindings/regulator/regulator.txt
+
+- rtc : This node defines settings for the Real-Time Clock associated with
+  the DA9063. There are currently no entries in this binding, however
+  compatible = "dlg,da9063-rtc" should be added if a node is created.
+
+- watchdog : This node defines settings for the Watchdog timer associated
+  with the DA9063. There are currently no entries in this binding, however
+  compatible = "dlg,da9063-watchdog" should be added if a node is created.
+
+
+Example:
+
+	pmic0: da9063@58 {
+		compatible = "dlg,da9063"
+		reg = <0x58>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+
+		regulators {
+			DA9063_BCORE1: bcore1 {
+				regulator-name = "BCORE1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp = <500000>;
+				regulator-max-microamp = <2000000>;
+				regulator-boot-on;
+			};
+			DA9063_LDO11: ldo11 {
+				regulator-name = "LDO_11";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-boot-on;
+			};
+		};
+	};
+
diff --git a/Bindings/mfd/hi6421.txt b/Bindings/mfd/hi6421.txt
new file mode 100644
index 000000000000..0d5a4466a494
--- /dev/null
+++ b/Bindings/mfd/hi6421.txt
@@ -0,0 +1,38 @@
+* HI6421 Multi-Functional Device (MFD), by HiSilicon Ltd.
+
+Required parent device properties:
+- compatible	: contains "hisilicon,hi6421-pmic";
+- reg		: register range space of hi6421;
+
+Supported Hi6421 sub-devices include:
+
+Device                     IRQ Names              Supply Names   Description
+------                     ---------              ------------   -----------
+regulators               :  None                 : None         : Regulators
+
+Required child device properties:
+None.
+
+Example:
+	hi6421 {
+		compatible = "hisilicon,hi6421-pmic";
+		reg = <0xfcc00000 0x0180>; /* 0x60 << 2 */
+
+		regulators {
+			// supply for MLC NAND/ eMMC
+			hi6421_vout0_reg: hi6421_vout0 {
+				regulator-name = "VOUT0";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			// supply for 26M Oscillator
+			hi6421_vout1_reg: hi6421_vout1 {
+				regulator-name = "VOUT1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
diff --git a/Bindings/mfd/max14577.txt b/Bindings/mfd/max14577.txt
new file mode 100644
index 000000000000..236264c10b92
--- /dev/null
+++ b/Bindings/mfd/max14577.txt
@@ -0,0 +1,146 @@
+Maxim MAX14577/77836 Multi-Function Device
+
+MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
+Battery Charger and SFOUT LDO output for powering USB devices. It is
+interfaced to host controller using I2C.
+
+MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
+
+
+Required properties:
+- compatible : Must be "maxim,max14577" or "maxim,max77836".
+- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
+- interrupts : IRQ line for the chip.
+- interrupt-parent :  The parent interrupt controller.
+
+
+Required nodes:
+ - charger :
+	Node for configuring the charger driver.
+	Required properties:
+		- compatible : "maxim,max14577-charger"
+			or "maxim,max77836-charger"
+		- maxim,fast-charge-uamp : Current in uA for Fast Charge;
+			Valid values:
+			- for max14577: 90000 - 950000;
+			- for max77836: 45000 - 475000;
+		- maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
+			Valid values:
+			- for max14577: 50000 - 200000;
+			- for max77836: 5000 - 100000;
+		- maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
+			In an overvoltage condition, INT asserts and charging
+			stops. Valid values:
+			- 6000000, 6500000, 7000000, 7500000;
+		- maxim,constant-uvolt : Battery Constant Voltage in uV;
+			Valid values:
+			- 4000000 - 4280000 (step by 20000);
+			- 4350000;
+
+
+Optional nodes:
+- max14577-muic/max77836-muic :
+	Node used only by extcon consumers.
+	Required properties:
+		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
+
+- regulators :
+	Required properties:
+		- compatible : "maxim,max14577-regulator"
+			or "maxim,max77836-regulator"
+
+	May contain a sub-node per regulator from the list below. Each
+	sub-node should contain the constraints and initialization information
+	for that regulator. See regulator.txt for a description of standard
+	properties for these sub-nodes.
+
+	List of valid regulator names:
+	- for max14577: CHARGER, SAFEOUT.
+	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
+
+	The SAFEOUT is a fixed voltage regulator so there is no need to specify
+	voltages for it.
+
+
+Example:
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+max14577@25 {
+	compatible = "maxim,max14577";
+	reg = <0x25>;
+	interrupt-parent = <&gpx1>;
+	interrupts = <5 IRQ_TYPE_NONE>;
+
+	muic: max14577-muic {
+		compatible = "maxim,max14577-muic";
+	};
+
+	regulators {
+		compatible = "maxim,max14577-regulator";
+
+		SAFEOUT {
+			regulator-name = "SAFEOUT";
+		};
+		CHARGER {
+			regulator-name = "CHARGER";
+			regulator-min-microamp = <90000>;
+			regulator-max-microamp = <950000>;
+			regulator-boot-on;
+		};
+	};
+
+	charger {
+		compatible = "maxim,max14577-charger";
+
+		maxim,constant-uvolt = <4350000>;
+		maxim,fast-charge-uamp = <450000>;
+		maxim,eoc-uamp = <50000>;
+		maxim,ovp-uvolt = <6500000>;
+	};
+};
+
+
+max77836@25 {
+	compatible = "maxim,max77836";
+	reg = <0x25>;
+	interrupt-parent = <&gpx1>;
+	interrupts = <5 IRQ_TYPE_NONE>;
+
+	muic: max77836-muic {
+		compatible = "maxim,max77836-muic";
+	};
+
+	regulators {
+		compatible = "maxim,max77836-regulator";
+
+		SAFEOUT {
+			regulator-name = "SAFEOUT";
+		};
+		CHARGER {
+			regulator-name = "CHARGER";
+			regulator-min-microamp = <90000>;
+			regulator-max-microamp = <950000>;
+			regulator-boot-on;
+		};
+		LDO1 {
+			regulator-name = "LDO1";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+		LDO2 {
+			regulator-name = "LDO2";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3950000>;
+		};
+	};
+
+	charger {
+		compatible = "maxim,max77836-charger";
+
+		maxim,constant-uvolt = <4350000>;
+		maxim,fast-charge-uamp = <225000>;
+		maxim,eoc-uamp = <7500>;
+		maxim,ovp-uvolt = <6500000>;
+	};
+};
diff --git a/Bindings/mfd/max77686.txt b/Bindings/mfd/max77686.txt
index 678f3cf0b8f0..e39f0bc1f55e 100644
--- a/Bindings/mfd/max77686.txt
+++ b/Bindings/mfd/max77686.txt
@@ -34,6 +34,18 @@ to get matched with their hardware counterparts as follow:
 	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 9.
 			example: BUCK1, BUCK5, BUCK9.
 
+  Regulators which can be turned off during system suspend:
+	-LDOn	:	2, 6-8, 10-12, 14-16,
+	-BUCKn	:	1-4.
+  Use standard regulator bindings for it ('regulator-off-in-suspend').
+
+  LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
+  control. To turn this feature on this property must be added to the regulator
+  sub-node:
+	- maxim,ena-gpios :	one GPIO specifier enable control (the gpio
+				flags are actually ignored and always
+				ACTIVE_HIGH is used)
+
 Example:
 
 	max77686@09 {
@@ -59,4 +71,12 @@ Example:
 				regulator-always-on;
 				regulator-boot-on;
 			};
+
+			buck9_reg {
+				regulator-compatible = "BUCK9";
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+			};
 	}
diff --git a/Bindings/mfd/max77693.txt b/Bindings/mfd/max77693.txt
index 11921cc417bf..38e64405e98d 100644
--- a/Bindings/mfd/max77693.txt
+++ b/Bindings/mfd/max77693.txt
@@ -27,6 +27,55 @@ Optional properties:
 
 	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
 
+- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
+  users with tactile feedback. PWM period and duty-cycle are varied in
+  order to provide the approprite level of feedback.
+
+ Required properties:
+	- compatible : Must be "maxim,max77693-hpatic"
+	- haptic-supply : power supply for the haptic motor
+	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+	- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
+	 PWM properties should be named "pwms". And number of cell is different
+	 for each pwm device.
+	 To get more informations, please refer to documentaion.
+	[*] refer Documentation/devicetree/bindings/pwm/pwm.txt
+
+- charger : Node configuring the charger driver.
+  If present, required properties:
+  - compatible : Must be "maxim,max77693-charger".
+
+  Optional properties (if not set, defaults will be used):
+  - maxim,constant-microvolt : Battery constant voltage in uV. The charger
+    will operate in fast charge constant current mode till battery voltage
+    reaches this level. Then the charger will switch to fast charge constant
+    voltage mode. Also vsys (system voltage) will be set to this value when
+    DC power is supplied but charger is not enabled.
+    Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+    Default: 4200000
+
+  - maxim,min-system-microvolt : Minimal system voltage in uV.
+    Valid values: 3000000 - 3700000, step by 100000 (rounded down)
+    Default: 3600000
+
+  - maxim,thermal-regulation-celsius : Temperature in Celsius for entering
+    high temperature charging mode. If die temperature exceeds this value
+    the charging current will be reduced by 105 mA/Celsius.
+    Valid values: 70, 85, 100, 115
+    Default: 100
+
+  - maxim,battery-overcurrent-microamp : Overcurrent protection threshold
+    in uA (current from battery to system).
+    Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+    Default: 3500000
+
+  - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for
+    triggering input voltage regulation loop. If input voltage decreases
+    below this value, the input current will be reduced to reach the
+    threshold voltage.
+    Valid values: 4300000, 4700000, 4800000, 4900000
+    Default: 4300000
+
 Example:
 	max77693@66 {
 		compatible = "maxim,max77693";
@@ -52,4 +101,21 @@ Example:
 					regulator-boot-on;
 			};
 		};
+
+		haptic {
+			compatible = "maxim,max77693-haptic";
+			haptic-supply = <&haptic_supply>;
+			pwms = <&pwm 0 40000 0>;
+			pwm-names = "haptic";
+		};
+
+		charger {
+			compatible = "maxim,max77693-charger";
+
+			maxim,constant-microvolt = <4200000>;
+			maxim,min-system-microvolt = <3600000>;
+			maxim,thermal-regulation-celsius = <75>;
+			maxim,battery-overcurrent-microamp = <3000000>;
+			maxim,charge-input-threshold-microvolt = <4300000>;
+		};
 	};
diff --git a/Bindings/mfd/qcom,spmi-pmic.txt b/Bindings/mfd/qcom,spmi-pmic.txt
new file mode 100644
index 000000000000..7182b8857f57
--- /dev/null
+++ b/Bindings/mfd/qcom,spmi-pmic.txt
@@ -0,0 +1,64 @@
+          Qualcomm SPMI PMICs multi-function device bindings
+
+The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
+PMICs.  These PMICs use a QPNP scheme through SPMI interface.
+QPNP is effectively a partitioning scheme for dividing the SPMI extended
+register space up into logical pieces, and set of fixed register
+locations/definitions within these regions, with some of these regions
+specifically used for interrupt handling.
+
+The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
+interfaced to the chip via the SPMI (System Power Management Interface) bus.
+Support for multiple independent functions are implemented by splitting the
+16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
+each. A function can consume one or more of these fixed-size register regions.
+
+Required properties:
+- compatible:      Should contain one of:
+                     "qcom,pm8941"
+                     "qcom,pm8841"
+                     "qcom,pma8084"
+                     or generalized "qcom,spmi-pmic".
+- reg:             Specifies the SPMI USID slave address for this device.
+                   For more information see:
+                   Documentation/devicetree/bindings/spmi/spmi.txt
+
+Required properties for peripheral child nodes:
+- compatible:      Should contain "qcom,xxx", where "xxx" is a peripheral name.
+
+Optional properties for peripheral child nodes:
+- interrupts:      Interrupts are specified as a 4-tuple. For more information
+                   see:
+                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+- interrupt-names: Corresponding interrupt name to the interrupts property
+
+Each child node of SPMI slave id represents a function of the PMIC. In the
+example below the rtc device node represents a peripheral of pm8941
+SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
+
+Example:
+
+	spmi {
+		compatible = "qcom,spmi-pmic-arb";
+
+		pm8941@0 {
+			compatible = "qcom,pm8941", "qcom,spmi-pmic";
+			reg = <0x0 SPMI_USID>;
+
+			rtc {
+				compatible = "qcom,rtc";
+				interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "alarm";
+			};
+		};
+
+		pm8941@1 {
+			compatible = "qcom,pm8941", "qcom,spmi-pmic";
+			reg = <0x1 SPMI_USID>;
+
+			regulator {
+				compatible = "qcom,regulator";
+				regulator-name = "8941_boost";
+			};
+		};
+	};
diff --git a/Bindings/mfd/qcom-pm8xxx.txt b/Bindings/mfd/qcom-pm8xxx.txt
new file mode 100644
index 000000000000..f24f33409164
--- /dev/null
+++ b/Bindings/mfd/qcom-pm8xxx.txt
@@ -0,0 +1,97 @@
+Qualcomm PM8xxx PMIC multi-function devices
+
+The PM8xxx family of Power Management ICs are used to provide regulated
+voltages and other various functionality to Qualcomm SoCs.
+
+= PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058"
+		    "qcom,pm8921"
+
+- #address-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- #size-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 0
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: specifies the interrupt that indicates a subdevice
+		    has generated an interrupt (summary interrupt). The
+		    format of the specifier is defined by the binding document
+		    describing the node's interrupt parent.
+
+- #interrupt-cells:
+	Usage: required
+	Value type : <u32>
+	Definition: must be 2. Specifies the number of cells needed to encode
+		    an interrupt source. The 1st cell contains the interrupt
+		    number. The 2nd cell is the trigger type and level flags
+		    encoded as follows:
+
+			1 = low-to-high edge triggered
+			2 = high-to-low edge triggered
+			4 = active high level-sensitive
+			8 = active low level-sensitive
+
+- interrupt-controller:
+	Usage: required
+	Value type: <empty>
+	Definition: identifies this node as an interrupt controller
+
+= SUBCOMPONENTS
+
+The PMIC contains multiple independent functions, each described in a subnode.
+The below bindings specify the set of valid subnodes.
+
+== Real-Time Clock
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8058-rtc"
+		    "qcom,pm8921-rtc"
+		    "qcom,pm8941-rtc"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: single entry specifying the base address of the RTC registers
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: single entry specifying the RTC's alarm interrupt
+
+- allow-set-time:
+	Usage: optional
+	Value type: <empty>
+	Definition: indicates that the setting of RTC time is allowed by
+		    the host CPU
+
+= EXAMPLE
+
+	pmicintc: pmic@0 {
+		compatible = "qcom,pm8921";
+		interrupts = <104 8>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@11d {
+			compatible = "qcom,pm8921-rtc";
+			reg = <0x11d>;
+			interrupts = <0x27 0>;
+		};
+	};
diff --git a/Bindings/mfd/qcom-rpm.txt b/Bindings/mfd/qcom-rpm.txt
new file mode 100644
index 000000000000..85e31980017a
--- /dev/null
+++ b/Bindings/mfd/qcom-rpm.txt
@@ -0,0 +1,70 @@
+Qualcomm Resource Power Manager (RPM)
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,rpm-apq8064"
+		    "qcom,rpm-msm8660"
+		    "qcom,rpm-msm8960"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address and size of the RPM's message ram
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: three entries specifying the RPM's:
+		    1. acknowledgement interrupt
+		    2. error interrupt
+		    3. wakeup interrupt
+
+- interrupt-names:
+	Usage: required
+	Value type: <string-array>
+	Definition: must be the three strings "ack", "err" and "wakeup", in order
+
+- #address-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1
+
+- #size-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 0
+
+- qcom,ipc:
+	Usage: required
+	Value type: <prop-encoded-array>
+
+	Definition: three entries specifying the outgoing ipc bit used for
+		    signaling the RPM:
+		    - phandle to a syscon node representing the apcs registers
+		    - u32 representing offset to the register within the syscon
+		    - u32 representing the ipc bit within the register
+
+
+= EXAMPLE
+
+	#include <dt-bindings/mfd/qcom-rpm.h>
+
+	rpm@108000 {
+		compatible = "qcom,rpm-msm8960";
+		reg = <0x108000 0x1000>;
+		qcom,ipc = <&apcs 0x8 2>;
+
+		interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
+		interrupt-names = "ack", "err", "wakeup";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
diff --git a/Bindings/mfd/rk808.txt b/Bindings/mfd/rk808.txt
new file mode 100644
index 000000000000..9e6e2592e5c8
--- /dev/null
+++ b/Bindings/mfd/rk808.txt
@@ -0,0 +1,177 @@
+RK808 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "rockchip,rk808"
+- reg: I2C slave address
+- interrupt-parent: The parent interrupt controller.
+- interrupts: the interrupt outputs of the controller.
+- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
+  outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+
+Optional properties:
+- clock-output-names: From common clock binding to override the
+  default output clock name
+- rockchip,system-power-controller: Telling whether or not this pmic is controlling
+  the system power.
+- vcc1-supply:  The input supply for DCDC_REG1
+- vcc2-supply:  The input supply for DCDC_REG2
+- vcc3-supply:  The input supply for DCDC_REG3
+- vcc4-supply:  The input supply for DCDC_REG4
+- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
+- vcc7-supply:  The input supply for LDO_REG3 and LDO_REG7
+- vcc8-supply:  The input supply for SWITCH_REG1
+- vcc9-supply:  The input supply for LDO_REG4 and LDO_REG5
+- vcc10-supply: The input supply for LDO_REG6
+- vcc11-supply: The input supply for LDO_REG8
+- vcc12-supply: The input supply for SWITCH_REG2
+
+Regulators: All the regulators of RK808 to be instantiated shall be
+listed in a child node named 'regulators'. Each regulator is represented
+by a child node of the 'regulators' node.
+
+	regulator-name {
+		/* standard regulator bindings here */
+	};
+
+Following regulators of the RK808 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK808 datasheet.
+
+	- DCDC_REGn
+		- valid values for n are 1 to 4.
+	- LDO_REGn
+		- valid values for n are 1 to 8.
+	- SWITCH_REGn
+		- valid values for n are 1 to 2
+
+Standard regulator bindings are used inside regulator subnodes. Check
+  Documentation/devicetree/bindings/regulator/regulator.txt
+for more details
+
+Example:
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		clock-output-names = "xin32k", "rk808-clkout2";
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		reg = <0x1b>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		vcc8-supply = <&vcc_18>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vccio_pmu>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-name = "vdd_arm";
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+			};
+
+			vccio_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_pmu";
+			};
+
+			vcc_tp: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_tp";
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+			};
+
+			vcc18_lcd: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+			};
+
+			vcca_codec: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_codec";
+			};
+
+			vcc_wl: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_wl";
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lcd";
+			};
+		};
+	};
diff --git a/Bindings/mfd/rn5t618.txt b/Bindings/mfd/rn5t618.txt
new file mode 100644
index 000000000000..937785a3eddc
--- /dev/null
+++ b/Bindings/mfd/rn5t618.txt
@@ -0,0 +1,36 @@
+* Ricoh RN5T618 PMIC
+
+Ricoh RN5T618 is a power management IC which integrates 3 step-down
+DCDC converters, 7 low-dropout regulators, a Li-ion battery charger,
+fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled
+through a I2C interface.
+
+Required properties:
+ - compatible: should be "ricoh,rn5t618"
+ - reg: the I2C slave address of the device
+
+Sub-nodes:
+ - regulators: the node is required if the regulator functionality is
+   needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1,
+   LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
+   The common bindings for each individual regulator can be found in:
+   Documentation/devicetree/bindings/regulator/regulator.txt
+
+Example:
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+
+		regulators {
+			DCDC1 {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+			};
+
+			DCDC2 {
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1175000>;
+			};
+		};
+	};
diff --git a/Bindings/mfd/s2mps11.txt b/Bindings/mfd/s2mps11.txt
index ba2d7f0f9c5f..57a045016fca 100644
--- a/Bindings/mfd/s2mps11.txt
+++ b/Bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@
 
-* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
 
 The Samsung S2MPS11 is a multi-function device which includes voltage and
 current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,8 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is
 addressed by the host system using different I2C slave addresses.
 
 Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
-              or "samsung,s2mpu02-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
+	      or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
 - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
 
 Optional properties:
@@ -17,8 +17,8 @@ Optional properties:
 - interrupts: Interrupt specifiers for interrupt sources.
 
 Optional nodes:
-- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
-  outputs, so to register these as clocks with common clock framework
+- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
+  KHz outputs, so to register these as clocks with common clock framework
   instantiate a sub-node named "clocks". It uses the common clock binding
   documented in :
   [Documentation/devicetree/bindings/clock/clock-bindings.txt]
@@ -30,12 +30,12 @@ Optional nodes:
     the clock which they consume.
     Clock               ID           Devices
     ----------------------------------------------------------
-    32KhzAP		0            S2MPS11, S2MPS14, S5M8767
-    32KhzCP		1            S2MPS11, S5M8767
-    32KhzBT		2            S2MPS11, S2MPS14, S5M8767
+    32KhzAP		0            S2MPS11, S2MPS13, S2MPS14, S5M8767
+    32KhzCP		1            S2MPS11, S2MPS13, S5M8767
+    32KhzBT		2            S2MPS11, S2MPS13, S2MPS14, S5M8767
 
-  - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
-		"samsung,s5m8767-clk"
+  - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
+		"samsung,s2mps14-clk", "samsung,s5m8767-clk"
 
 - regulators: The regulators of s2mps11 that have to be instantiated should be
 included in a sub-node named 'regulators'. Regulator nodes included in this
@@ -47,7 +47,7 @@ sub-node should be of the format as listed below.
 
  regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us
 
- BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
+ BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly
  regulator-ramp-delay = <0> can be used for them to disable ramp delay.
  In the absence of the regulator-ramp-delay property, the default ramp
  delay will be used.
@@ -81,12 +81,14 @@ as per the datasheet of s2mps11.
 	- LDOn
 		  - valid values for n are:
 			- S2MPS11: 1 to 38
+			- S2MPS13: 1 to 40
 			- S2MPS14: 1 to 25
 			- S2MPU02: 1 to 28
 		  - Example: LDO1, LDO2, LDO28
 	- BUCKn
 		  - valid values for n are:
 			- S2MPS11: 1 to 10
+			- S2MPS13: 1 to 10
 			- S2MPS14: 1 to 5
 			- S2MPU02: 1 to 7
 		  - Example: BUCK1, BUCK2, BUCK9
diff --git a/Bindings/mfd/stmpe.txt b/Bindings/mfd/stmpe.txt
index 56edb5520685..3fb68bfefc8b 100644
--- a/Bindings/mfd/stmpe.txt
+++ b/Bindings/mfd/stmpe.txt
@@ -13,6 +13,7 @@ Optional properties:
  - interrupt-parent             : Specifies which IRQ controller we're connected to
  - wakeup-source                : Marks the input device as wakable
  - st,autosleep-timeout         : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
+ - irq-gpio                     : If present, which GPIO to use for event IRQ
 
 Example:
 
diff --git a/Bindings/mfd/tc3589x.txt b/Bindings/mfd/tc3589x.txt
new file mode 100644
index 000000000000..6fcedba46ae9
--- /dev/null
+++ b/Bindings/mfd/tc3589x.txt
@@ -0,0 +1,107 @@
+* Toshiba TC3589x multi-purpose expander
+
+The Toshiba TC3589x series are I2C-based MFD devices which may expose the
+following built-in devices: gpio, keypad, rotator (vibrator), PWM (for
+e.g. LEDs or vibrators) The included models are:
+
+- TC35890
+- TC35892
+- TC35893
+- TC35894
+- TC35895
+- TC35896
+
+Required properties:
+ - compatible : must be "toshiba,tc35890", "toshiba,tc35892", "toshiba,tc35893",
+   "toshiba,tc35894", "toshiba,tc35895" or "toshiba,tc35896"
+ - reg : I2C address of the device
+ - interrupt-parent : specifies which IRQ controller we're connected to
+ - interrupts : the interrupt on the parent the controller is connected to
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <1>, the first cell is the IRQ offset on this
+   TC3589x interrupt controller.
+
+Optional nodes:
+
+- GPIO
+  This GPIO module inside the TC3589x has 24 (TC35890, TC35892) or 20
+  (other models) GPIO lines.
+ - compatible : must be "toshiba,tc3589x-gpio"
+ - interrupts : interrupt on the parent, which must be the tc3589x MFD device
+ - interrupt-controller : marks the device node as an interrupt controller
+ - #interrupt-cells : should be <2>, the first cell is the IRQ offset on this
+   TC3589x GPIO interrupt controller, the second cell is the interrupt flags
+   in accordance with <dt-bindings/interrupt-controller/irq.h>. The following
+   flags are valid:
+   - IRQ_TYPE_LEVEL_LOW
+   - IRQ_TYPE_LEVEL_HIGH
+   - IRQ_TYPE_EDGE_RISING
+   - IRQ_TYPE_EDGE_FALLING
+   - IRQ_TYPE_EDGE_BOTH
+ - gpio-controller : marks the device node as a GPIO controller
+ - #gpio-cells : should be <2>, the first cell is the GPIO offset on this
+   GPIO controller, the second cell is the flags.
+
+- Keypad
+  This keypad is the same on all variants, supporting up to 96 different
+  keys. The linux-specific properties are modeled on those already existing
+  in other input drivers.
+ - compatible : must be "toshiba,tc3589x-keypad"
+ - debounce-delay-ms : debounce interval in milliseconds
+ - keypad,num-rows : number of rows in the matrix, see
+   bindings/input/matrix-keymap.txt
+ - keypad,num-columns : number of columns in the matrix, see
+   bindings/input/matrix-keymap.txt
+ - linux,keymap: the definition can be found in
+   bindings/input/matrix-keymap.txt
+ - linux,no-autorepeat: do no enable autorepeat feature.
+ - linux,wakeup: use any event on keypad as wakeup event.
+
+Example:
+
+tc35893@44 {
+	compatible = "toshiba,tc35893";
+	reg = <0x44>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	tc3589x_gpio {
+		compatible = "toshiba,tc3589x-gpio";
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	tc3589x_keypad {
+		compatible = "toshiba,tc3589x-keypad";
+		interrupts = <6>;
+		debounce-delay-ms = <4>;
+		keypad,num-columns = <8>;
+		keypad,num-rows = <8>;
+		linux,no-autorepeat;
+		linux,wakeup;
+		linux,keymap = <0x0301006b
+				0x04010066
+				0x06040072
+				0x040200d7
+				0x0303006a
+				0x0205000e
+				0x0607008b
+				0x0500001c
+				0x0403000b
+				0x03040034
+				0x05020067
+				0x0305006c
+				0x040500e7
+				0x0005009e
+				0x06020073
+				0x01030039
+				0x07060069
+				0x050500d9>;
+	};
+};
diff --git a/Bindings/mfd/twl4030-power.txt b/Bindings/mfd/twl4030-power.txt
index b9ee7b98d3e2..3d19963312ce 100644
--- a/Bindings/mfd/twl4030-power.txt
+++ b/Bindings/mfd/twl4030-power.txt
@@ -23,8 +23,13 @@ down during off-idle. Note that this does not work on all boards
 depending on how the external oscillator is wired.
 
 Optional properties:
-- ti,use_poweroff: With this flag, the chip will initiates an ACTIVE-to-OFF or
-		   SLEEP-to-OFF transition when the system poweroffs.
+
+- ti,system-power-controller: This indicates that TWL4030 is the
+  power supply master of the system. With this flag, the chip will
+  initiate an ACTIVE-to-OFF or SLEEP-to-OFF transition when the
+  system poweroffs.
+
+- ti,use_poweroff: Deprecated name for ti,system-power-controller
 
 Example:
 &i2c1 {
diff --git a/Bindings/mips/brcm/bcm3384-intc.txt b/Bindings/mips/brcm/bcm3384-intc.txt
new file mode 100644
index 000000000000..d4e0141d3620
--- /dev/null
+++ b/Bindings/mips/brcm/bcm3384-intc.txt
@@ -0,0 +1,37 @@
+* Interrupt Controller
+
+Properties:
+- compatible: "brcm,bcm3384-intc"
+
+  Compatibility with BCM3384 and possibly other BCM33xx/BCM63xx SoCs.
+
+- reg: Address/length pairs for each mask/status register set.  Length must
+  be 8.  If multiple register sets are specified, the first set will
+  handle IRQ offsets 0..31, the second set 32..63, and so on.
+
+- interrupt-controller: This is an interrupt controller.
+
+- #interrupt-cells: Must be <1>.  Just a simple IRQ offset; no level/edge
+  or polarity configuration is possible with this controller.
+
+- interrupt-parent: This controller is cascaded from a MIPS CPU HW IRQ, or
+  from another INTC.
+
+- interrupts: The IRQ on the parent controller.
+
+Example:
+	periph_intc: periph_intc@14e00038 {
+		compatible = "brcm,bcm3384-intc";
+
+		/*
+		 * IRQs 0..31:  mask reg 0x14e00038, status reg 0x14e0003c
+		 * IRQs 32..63: mask reg 0x14e00340, status reg 0x14e00344
+		 */
+		reg = <0x14e00038 0x8 0x14e00340 0x8>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpu_intc>;
+		interrupts = <4>;
+	};
diff --git a/Bindings/mips/brcm/bmips.txt b/Bindings/mips/brcm/bmips.txt
new file mode 100644
index 000000000000..8ef71b4085ca
--- /dev/null
+++ b/Bindings/mips/brcm/bmips.txt
@@ -0,0 +1,8 @@
+* Broadcom MIPS (BMIPS) CPUs
+
+Required properties:
+- compatible: "brcm,bmips3300", "brcm,bmips4350", "brcm,bmips4380",
+  "brcm,bmips5000"
+
+- mips-hpt-frequency: This is common to all CPUs in the system so it lives
+  under the "cpus" node.
diff --git a/Bindings/mips/brcm/cm-dsl.txt b/Bindings/mips/brcm/cm-dsl.txt
new file mode 100644
index 000000000000..8a139cb3c0b5
--- /dev/null
+++ b/Bindings/mips/brcm/cm-dsl.txt
@@ -0,0 +1,11 @@
+* Broadcom cable/DSL platforms
+
+SoCs:
+
+Required properties:
+- compatible: "brcm,bcm3384", "brcm,bcm33843"
+
+Boards:
+
+Required properties:
+- compatible: "brcm,bcm93384wvg"
diff --git a/Bindings/mips/brcm/usb.txt b/Bindings/mips/brcm/usb.txt
new file mode 100644
index 000000000000..452c45c7bf29
--- /dev/null
+++ b/Bindings/mips/brcm/usb.txt
@@ -0,0 +1,11 @@
+* Broadcom USB controllers
+
+Required properties:
+- compatible: "brcm,bcm3384-ohci", "brcm,bcm3384-ehci"
+
+  These currently use the generic-ohci and generic-ehci drivers.  On some
+  systems, special handling may be needed in the following cases:
+
+  - Restoring state after systemwide power save modes
+  - Sharing PHYs with the USBD (UDC) hardware
+  - Figuring out which controllers are disabled on ASIC bondout variants
diff --git a/Bindings/mips/cavium/cib.txt b/Bindings/mips/cavium/cib.txt
new file mode 100644
index 000000000000..f39a1aa2852b
--- /dev/null
+++ b/Bindings/mips/cavium/cib.txt
@@ -0,0 +1,43 @@
+* Cavium Interrupt Bus widget
+
+Properties:
+- compatible: "cavium,octeon-7130-cib"
+
+  Compatibility with cn70XX SoCs.
+
+- interrupt-controller:  This is an interrupt controller.
+
+- reg: Two elements consisting of the addresses of the RAW and EN
+  registers of the CIB block
+
+- cavium,max-bits: The index (zero based) of the highest numbered bit
+  in the CIB block.
+
+- interrupt-parent:  Always the CIU on the SoC.
+
+- interrupts: The CIU line to which the CIB block is connected.
+
+- #interrupt-cells: Must be <2>.  The first cell is the bit within the
+   CIB.  The second cell specifies the triggering semantics of the
+   line.
+
+Example:
+
+	interrupt-controller@107000000e000 {
+		compatible = "cavium,octeon-7130-cib";
+		reg = <0x10700 0x0000e000 0x0 0x8>, /* RAW */
+		      <0x10700 0x0000e100 0x0 0x8>; /* EN */
+		cavium,max-bits = <23>;
+
+		interrupt-controller;
+		interrupt-parent = <&ciu>;
+		interrupts = <1 24>;
+		/* Interrupts are specified by two parts:
+		 * 1) Bit number in the CIB* registers
+		 * 2) Triggering (1 - edge rising
+		 *		  2 - edge falling
+		 *		  4 - level active high
+		 *		  8 - level active low)
+		 */
+		#interrupt-cells = <2>;
+	};
diff --git a/Bindings/mips/cpu_irq.txt b/Bindings/mips/cpu_irq.txt
index 13aa4b62c62a..fc149f326dae 100644
--- a/Bindings/mips/cpu_irq.txt
+++ b/Bindings/mips/cpu_irq.txt
@@ -1,6 +1,6 @@
 MIPS CPU interrupt controller
 
-On MIPS the mips_cpu_intc_init() helper can be used to initialize the 8 CPU
+On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
 IRQs from a devicetree file and create a irq_domain for IRQ controller.
 
 With the irq_domain in place we can describe how the 8 IRQs are wired to the
@@ -36,7 +36,7 @@ Example devicetree:
 
 Example platform irq.c:
 static struct of_device_id __initdata of_irq_ids[] = {
-	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
 	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
 	{},
 };
diff --git a/Bindings/misc/fsl,qoriq-mc.txt b/Bindings/misc/fsl,qoriq-mc.txt
new file mode 100644
index 000000000000..c7a26ca8da12
--- /dev/null
+++ b/Bindings/misc/fsl,qoriq-mc.txt
@@ -0,0 +1,40 @@
+* Freescale Management Complex
+
+The Freescale Management Complex (fsl-mc) is a hardware resource
+manager that manages specialized hardware objects used in
+network-oriented packet processing applications. After the fsl-mc
+block is enabled, pools of hardware resources are available, such as
+queues, buffer pools, I/O interfaces. These resources are building
+blocks that can be used to create functional hardware objects/devices
+such as network interfaces, crypto accelerator instances, L2 switches,
+etc.
+
+Required properties:
+
+    - compatible
+        Value type: <string>
+        Definition: Must be "fsl,qoriq-mc".  A Freescale Management Complex
+                    compatible with this binding must have Block Revision
+                    Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
+                    the MC control register region.
+
+    - reg
+        Value type: <prop-encoded-array>
+        Definition: A standard property.  Specifies one or two regions
+                    defining the MC's registers:
+
+                       -the first region is the command portal for the
+                        this machine and must always be present
+
+                       -the second region is the MC control registers. This
+                        region may not be present in some scenarios, such
+                        as in the device tree presented to a virtual machine.
+
+Example:
+
+        fsl_mc: fsl-mc@80c000000 {
+                compatible = "fsl,qoriq-mc";
+                reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
+                      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+        };
+
diff --git a/Bindings/misc/nvidia,tegra20-apbmisc.txt b/Bindings/misc/nvidia,tegra20-apbmisc.txt
index b97b8bef1fe5..47b205cc9cc7 100644
--- a/Bindings/misc/nvidia,tegra20-apbmisc.txt
+++ b/Bindings/misc/nvidia,tegra20-apbmisc.txt
@@ -1,11 +1,10 @@
 NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
 
 Required properties:
-- compatible : should be:
-       "nvidia,tegra20-apbmisc"
-       "nvidia,tegra30-apbmisc"
-       "nvidia,tegra114-apbmisc"
-       "nvidia,tegra124-apbmisc"
+- compatible : For Tegra20, must be "nvidia,tegra20-apbmisc".  For Tegra30,
+  must be "nvidia,tegra30-apbmisc".  Otherwise, must contain
+  "nvidia,<chip>-apbmisc", plus one of the above, where <chip> is tegra114,
+  tegra124, tegra132.
 - reg: Should contain 2 entries: the first entry gives the physical address
        and length of the registers which contain revision and debug features.
        The second entry gives the physical address and length of the
diff --git a/Bindings/mmc/exynos-dw-mshc.txt b/Bindings/mmc/exynos-dw-mshc.txt
index 6cd3525d0e09..ee4fc0576c7d 100644
--- a/Bindings/mmc/exynos-dw-mshc.txt
+++ b/Bindings/mmc/exynos-dw-mshc.txt
@@ -18,6 +18,10 @@ Required Properties:
 	  specific extensions.
 	- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
 	  specific extensions.
+	- "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
+	  specific extensions.
+	- "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
+	  specific extensions having an SMU.
 
 * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
   unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
diff --git a/Bindings/mmc/img-dw-mshc.txt b/Bindings/mmc/img-dw-mshc.txt
new file mode 100644
index 000000000000..85de99fcaa2f
--- /dev/null
+++ b/Bindings/mmc/img-dw-mshc.txt
@@ -0,0 +1,29 @@
+* Imagination specific extensions to the Synopsys Designware Mobile Storage
+  Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Imagination specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+	- "img,pistachio-dw-mshc": for Pistachio SoCs
+
+Example:
+
+	mmc@18142000 {
+		compatible = "img,pistachio-dw-mshc";
+		reg = <0x18142000 0x400>;
+		interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&system_clk>, <&sdhost_clk>;
+		clock-names = "biu", "ciu";
+
+		fifo-depth = <0x20>;
+		bus-width = <4>;
+		num-slots = <1>;
+		disable-wp;
+	};
diff --git a/Bindings/mmc/mmc-pwrseq-emmc.txt b/Bindings/mmc/mmc-pwrseq-emmc.txt
new file mode 100644
index 000000000000..0cb827bf9435
--- /dev/null
+++ b/Bindings/mmc/mmc-pwrseq-emmc.txt
@@ -0,0 +1,25 @@
+* The simple eMMC hardware reset provider
+
+The purpose of this driver is to perform standard eMMC hw reset
+procedure, as descibed by Jedec 4.4 specification. This procedure is
+performed just after MMC core enabled power to the given mmc host (to
+fix possible issues if bootloader has left eMMC card in initialized or
+unknown state), and before performing complete system reboot (also in
+case of emergency reboot call). The latter is needed on boards, which
+doesn't have hardware reset logic connected to emmc card and (limited or
+broken) ROM bootloaders are unable to read second stage from the emmc
+card if the card is left in unknown or already initialized state.
+
+Required properties:
+- compatible : contains "mmc-pwrseq-emmc".
+- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted
+	and then deasserted to perform eMMC card reset. To perform
+	reset procedure as described in Jedec 4.4 specification, the
+	gpio line should be defined as GPIO_ACTIVE_LOW.
+
+Example:
+
+	sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	}
diff --git a/Bindings/mmc/mmc-pwrseq-simple.txt b/Bindings/mmc/mmc-pwrseq-simple.txt
new file mode 100644
index 000000000000..a462c50f19a8
--- /dev/null
+++ b/Bindings/mmc/mmc-pwrseq-simple.txt
@@ -0,0 +1,25 @@
+* The simple MMC power sequence provider
+
+The purpose of the simple MMC power sequence provider is to supports a set of
+common properties between various SOC designs. It thus enables us to use the
+same provider for several SOC designs.
+
+Required properties:
+- compatible : contains "mmc-pwrseq-simple".
+
+Optional properties:
+- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted
+	at initialization and prior we start the power up procedure of the card.
+	They will be de-asserted right after the power has been provided to the
+	card.
+- clocks : Must contain an entry for the entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entry:
+  "ext_clock" (External clock provided to the card).
+
+Example:
+
+	sdhci0_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio1 12 0>;
+	}
diff --git a/Bindings/mmc/mmc.txt b/Bindings/mmc/mmc.txt
index 431716e37a39..438899e8829b 100644
--- a/Bindings/mmc/mmc.txt
+++ b/Bindings/mmc/mmc.txt
@@ -40,6 +40,8 @@ Optional properties:
 - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
 - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported
 - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
+- dsr: Value the card's (optional) Driver Stage Register (DSR) should be
+  programmed with. Valid range: [0 .. 0xffff].
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
@@ -62,7 +64,43 @@ Optional SDIO properties:
 - keep-power-in-suspend: Preserves card power during a suspend/resume cycle
 - enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion
 
-Example:
+
+MMC power sequences:
+--------------------
+
+System on chip designs may specify a specific MMC power sequence. To
+successfully detect an (e)MMC/SD/SDIO card, that power sequence must be
+maintained while initializing the card.
+
+Optional property:
+- mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*"
+	for documentation of MMC power sequence bindings.
+
+
+Use of Function subnodes
+------------------------
+
+On embedded systems the cards connected to a host may need additional
+properties. These can be specified in subnodes to the host controller node.
+The subnodes are identified by the standard 'reg' property.
+Which information exactly can be specified depends on the bindings for the
+SDIO function driver for the subnode, as specified by the compatible string.
+
+Required host node properties when using function subnodes:
+- #address-cells: should be one. The cell is the slot id.
+- #size-cells: should be zero.
+
+Required function subnode properties:
+- compatible: name of SDIO function following generic names recommended practice
+- reg: Must contain the SDIO function number of the function this subnode
+       describes. A value of 0 denotes the memory SD function, values from
+       1 to 7 denote the SDIO functions.
+
+
+Examples
+--------
+
+Basic example:
 
 sdhci@ab000000 {
 	compatible = "sdhci";
@@ -75,4 +113,28 @@ sdhci@ab000000 {
 	max-frequency = <50000000>;
 	keep-power-in-suspend;
 	enable-sdio-wakeup;
+	mmc-pwrseq = <&sdhci0_pwrseq>
 }
+
+Example with sdio function subnode:
+
+mmc3: mmc@01c12000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&sdhci0_pwrseq>
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm43xx-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <10 8>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
diff --git a/Bindings/mmc/nvidia,tegra20-sdhci.txt b/Bindings/mmc/nvidia,tegra20-sdhci.txt
index f357c16ea815..15b8368ee1f2 100644
--- a/Bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -7,7 +7,11 @@ This file documents differences between the core properties described
 by mmc.txt and the properties used by the sdhci-tegra driver.
 
 Required properties:
-- compatible : Should be "nvidia,<chip>-sdhci"
+- compatible : For Tegra20, must contain "nvidia,tegra20-sdhci".
+  For Tegra30, must contain "nvidia,tegra30-sdhci".  For Tegra114,
+  must contain "nvidia,tegra114-sdhci".  For Tegra124, must contain
+  "nvidia,tegra124-sdhci".  Otherwise, must contain "nvidia,<chip>-sdhci",
+  plus one of the above, where <chip> is tegra132 or tegra210.
 - clocks : Must contain one entry, for the module clock.
   See ../clocks/clock-bindings.txt for details.
 - resets : Must contain an entry for each entry in reset-names.
diff --git a/Bindings/mmc/rockchip-dw-mshc.txt b/Bindings/mmc/rockchip-dw-mshc.txt
index c559f3f36309..c327c2d6f23d 100644
--- a/Bindings/mmc/rockchip-dw-mshc.txt
+++ b/Bindings/mmc/rockchip-dw-mshc.txt
@@ -10,12 +10,14 @@ extensions to the Synopsys Designware Mobile Storage Host Controller.
 Required Properties:
 
 * compatible: should be
-	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following
+	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
+							before RK3288
+	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
 
 Example:
 
 	rkdwmmc0@12200000 {
-		compatible = "rockchip,rk2928-dw-mshc";
+		compatible = "rockchip,rk3288-dw-mshc";
 		reg = <0x12200000 0x1000>;
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
diff --git a/Bindings/mmc/sdhci-fujitsu.txt b/Bindings/mmc/sdhci-fujitsu.txt
new file mode 100644
index 000000000000..de2c53cff4f1
--- /dev/null
+++ b/Bindings/mmc/sdhci-fujitsu.txt
@@ -0,0 +1,30 @@
+* Fujitsu SDHCI controller
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci_f_sdh30 driver.
+
+Required properties:
+- compatible: "fujitsu,mb86s70-sdhci-3.0"
+- clocks: Must contain an entry for each entry in clock-names. It is a
+  list of phandles and clock-specifier pairs.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: Should contain the following two entries:
+	"iface" - clock used for sdhci interface
+	"core"  - core clock for sdhci controller
+
+Optional properties:
+- vqmmc-supply: phandle to the regulator device tree node, mentioned
+  as the VCCQ/VDD_IO supply in the eMMC/SD specs.
+
+Example:
+
+	sdhci1: mmc@36600000 {
+		compatible = "fujitsu,mb86s70-sdhci-3.0";
+		reg = <0 0x36600000 0x1000>;
+		interrupts = <0 172 0x4>,
+			     <0 173 0x4>;
+		bus-width = <4>;
+		vqmmc-supply = <&vccq_sdhci1>;
+		clocks = <&clock 2 2 0>, <&clock 2 3 0>;
+		clock-names = "iface", "core";
+	};
diff --git a/Bindings/mmc/sdhci-pxa.txt b/Bindings/mmc/sdhci-pxa.txt
index 86223c3eda90..3d1b449d6097 100644
--- a/Bindings/mmc/sdhci-pxa.txt
+++ b/Bindings/mmc/sdhci-pxa.txt
@@ -9,9 +9,17 @@ Required properties:
 - reg:
   * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
     the SDHCI registers.
-  * for "marvell,armada-380-sdhci", two register areas. The first one
-    for the SDHCI registers themselves, and the second one for the
-    AXI/Mbus bridge registers of the SDHCI unit.
+
+  * for "marvell,armada-380-sdhci", three register areas. The first
+    one for the SDHCI registers themselves, the second one for the
+    AXI/Mbus bridge registers of the SDHCI unit, the third one for the
+    SDIO3 Configuration register
+- reg names: should be "sdhci", "mbus", "conf-sdio3". only mandatory
+  for "marvell,armada-380-sdhci"
+- clocks: Array of clocks required for SDHCI; requires at least one for
+    I/O clock.
+- clock-names: Array of names corresponding to clocks property; shall be
+    "io" for I/O clock and "core" for optional core clock.
 
 Optional properties:
 - mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
@@ -23,14 +31,20 @@ sdhci@d4280800 {
 	reg = <0xd4280800 0x800>;
 	bus-width = <8>;
 	interrupts = <27>;
+	clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+	clock-names = "io", "core";
 	non-removable;
 	mrvl,clk-delay-cycles = <31>;
 };
 
 sdhci@d8000 {
 	compatible = "marvell,armada-380-sdhci";
-	reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+	reg-names = "sdhci", "mbus", "conf-sdio3";
+	reg = <0xd8000 0x1000>,
+		<0xdc000 0x100>;
+		<0x18454 0x4>;
 	interrupts = <0 25 0x4>;
 	clocks = <&gateclk 17>;
+	clock-names = "io";
 	mrvl,clk-delay-cycles = <0x1F>;
 };
diff --git a/Bindings/mmc/sunxi-mmc.txt b/Bindings/mmc/sunxi-mmc.txt
index 91b3a3467150..4bf41d833804 100644
--- a/Bindings/mmc/sunxi-mmc.txt
+++ b/Bindings/mmc/sunxi-mmc.txt
@@ -10,8 +10,8 @@ Absolute maximum transfer rate is 200MB/s
 Required properties:
  - compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc"
  - reg : mmc controller base registers
- - clocks : a list with 2 phandle + clock specifier pairs
- - clock-names : must contain "ahb" and "mmc"
+ - clocks : a list with 4 phandle + clock specifier pairs
+ - clock-names : must contain "ahb", "mmc", "output" and "sample"
  - interrupts : mmc controller interrupt
 
 Optional properties:
@@ -25,8 +25,8 @@ Examples:
 	mmc0: mmc@01c0f000 {
 		compatible = "allwinner,sun5i-a13-mmc";
 		reg = <0x01c0f000 0x1000>;
-		clocks = <&ahb_gates 8>, <&mmc0_clk>;
-		clock-names = "ahb", "mod";
+		clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>;
+		clock-names = "ahb", "mod", "output", "sample";
 		interrupts = <0 32 4>;
 		status = "disabled";
 	};
diff --git a/Bindings/mmc/tmio_mmc.txt b/Bindings/mmc/tmio_mmc.txt
index fa0f327cde01..400b640fabc7 100644
--- a/Bindings/mmc/tmio_mmc.txt
+++ b/Bindings/mmc/tmio_mmc.txt
@@ -19,6 +19,9 @@ Required properties:
 		"renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC
 		"renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC
 		"renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC
+		"renesas,sdhi-r8a7792" - SDHI IP on R8A7792 SoC
+		"renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC
+		"renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC
 
 Optional properties:
 - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable
diff --git a/Bindings/mtd/atmel-nand.txt b/Bindings/mtd/atmel-nand.txt
index c4728839d0c1..7d4c8eb775a5 100644
--- a/Bindings/mtd/atmel-nand.txt
+++ b/Bindings/mtd/atmel-nand.txt
@@ -1,11 +1,13 @@
 Atmel NAND flash
 
 Required properties:
-- compatible : "atmel,at91rm9200-nand".
+- compatible : should be "atmel,at91rm9200-nand" or "atmel,sama5d4-nand".
 - reg : should specify localbus address and size used for the chip,
 	and hardware ECC controller if available.
 	If the hardware ECC is PMECC, it should contain address and size for
-	PMECC, PMECC Error Location controller and ROM which has lookup tables.
+	PMECC and PMECC Error Location controller.
+	The PMECC lookup table address and size in ROM is optional. If not
+	specified, driver will build it in runtime.
 - atmel,nand-addr-offset : offset for the address latch.
 - atmel,nand-cmd-offset : offset for the command latch.
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
@@ -27,7 +29,7 @@ Optional properties:
   are: 512, 1024.
 - atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM
   for different sector size. First one is for sector size 512, the next is for
-  sector size 1024.
+  sector size 1024. If not specified, driver will build the table in runtime.
 - nand-bus-width : 8 or 16 bus width if not present 8
 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
 - Nand Flash Controller(NFC) is a slave driver under Atmel nand flash
@@ -36,6 +38,7 @@ Optional properties:
     - reg : should specify the address and size used for NFC command registers,
             NFC registers and NFC Sram. NFC Sram address and size can be absent
             if don't want to use it.
+    - clocks: phandle to the peripheral clock
   - Optional properties:
     - atmel,write-by-sram: boolean to enable NFC write by sram.
 
@@ -98,6 +101,7 @@ nand0: nand@40000000 {
 		compatible = "atmel,sama5d3-nfc";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		clocks = <&hsmc_clk>
 		reg = <
 			0x70000000 0x10000000	/* NFC Command Registers */
 			0xffffc000 0x00000070	/* NFC HSMC regs */
diff --git a/Bindings/mtd/diskonchip.txt b/Bindings/mtd/diskonchip.txt
new file mode 100644
index 000000000000..3e13bfdbea5b
--- /dev/null
+++ b/Bindings/mtd/diskonchip.txt
@@ -0,0 +1,15 @@
+M-Systems and Sandisk DiskOnChip devices
+
+M-System DiskOnChip G3
+======================
+The Sandisk (formerly M-Systems) docg3 is a nand device of 64M to 256MB.
+
+Required properties:
+ - compatible: should be "m-systems,diskonchip-g3"
+ - reg: register base and size
+
+Example:
+	docg3: flash@0 {
+		compatible = "m-systems,diskonchip-g3";
+		reg = <0x0 0x2000>;
+	};
diff --git a/Bindings/mtd/fsl-quadspi.txt b/Bindings/mtd/fsl-quadspi.txt
index 823d13412195..4461dc71cb10 100644
--- a/Bindings/mtd/fsl-quadspi.txt
+++ b/Bindings/mtd/fsl-quadspi.txt
@@ -1,7 +1,7 @@
 * Freescale Quad Serial Peripheral Interface(QuadSPI)
 
 Required properties:
-  - compatible : Should be "fsl,vf610-qspi"
+  - compatible : Should be "fsl,vf610-qspi" or "fsl,imx6sx-qspi"
   - reg : the first contains the register location and length,
           the second contains the memory mapping address and length
   - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
diff --git a/Bindings/mtd/fsmc-nand.txt b/Bindings/mtd/fsmc-nand.txt
index ec42935f3908..5235cbc551b0 100644
--- a/Bindings/mtd/fsmc-nand.txt
+++ b/Bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
 Optional properties:
 - bank-width : Width (in bytes) of the device.  If not present, the width
   defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
 - timings: array of 6 bytes for NAND timings. The meanings of these bytes
   are:
   byte 0 TCLR  : CLE to RE delay in number of AHB clock cycles, only 4 bits
diff --git a/Bindings/mtd/gpio-control-nand.txt b/Bindings/mtd/gpio-control-nand.txt
index 36ef07d3c90f..af8915b41ccf 100644
--- a/Bindings/mtd/gpio-control-nand.txt
+++ b/Bindings/mtd/gpio-control-nand.txt
@@ -11,8 +11,8 @@ Required properties:
   are made in native endianness.
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
   representing partitions.
-- gpios : specifies the gpio pins to control the NAND device.  nwp is an
-  optional gpio and may be set to 0 if not present.
+- gpios : Specifies the GPIO pins to control the NAND device.  The order of
+  GPIO references is:  RDY, nCE, ALE, CLE, and an optional nWP.
 
 Optional properties:
 - bank-width : Width (in bytes) of the device.  If not present, the width
@@ -35,11 +35,11 @@ gpio-nand@1,0 {
 	reg = <1 0x0000 0x2>;
 	#address-cells = <1>;
 	#size-cells = <1>;
-	gpios = <&banka 1 0	/* rdy */
-		 &banka 2 0 	/* nce */
-		 &banka 3 0 	/* ale */
-		 &banka 4 0 	/* cle */
-		 0		/* nwp */>;
+	gpios = <&banka 1 0>,	/* RDY */
+		<&banka 2 0>, 	/* nCE */
+		<&banka 3 0>, 	/* ALE */
+		<&banka 4 0>, 	/* CLE */
+		<0>;		/* nWP */
 
 	partition@0 {
 	...
diff --git a/Bindings/mtd/gpmc-nand.txt b/Bindings/mtd/gpmc-nand.txt
index 65f4f7c43136..fb733c4e1c11 100644
--- a/Bindings/mtd/gpmc-nand.txt
+++ b/Bindings/mtd/gpmc-nand.txt
@@ -22,7 +22,7 @@ Optional properties:
 				width of 8 is assumed.
 
  - ti,nand-ecc-opt:		A string setting the ECC layout to use. One of:
-		"sw"		<deprecated> use "ham1" instead
+		"sw"		1-bit Hamming ecc code via software
 		"hw"		<deprecated> use "ham1" instead
 		"hw-romcode"	<deprecated> use "ham1" instead
 		"ham1"		1-bit Hamming ecc code
@@ -110,8 +110,8 @@ on various other factors also like;
 	Other factor which governs the selection of ecc-scheme is oob-size.
 	Higher ECC schemes require more OOB/Spare area to store ECC syndrome,
 	so the device should have enough free bytes available its OOB/Spare
-	area to accomodate ECC for entire page. In general following expression
-	helps in determining if given device can accomodate ECC syndrome:
+	area to accommodate ECC for entire page. In general following expression
+	helps in determining if given device can accommodate ECC syndrome:
 	"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
 	where
 		OOBSIZE		number of bytes in OOB/spare area
@@ -133,5 +133,5 @@ on various other factors also like;
 	Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and
 		trying to use BCH16 (ECC_BYTES=26) ecc-scheme.
 		Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B
-		which can be accomodate in the OOB/Spare area of this device
+		which can be accommodated in the OOB/Spare area of this device
 		(OOBSIZE=128). So this device can use BCH16 ecc-scheme.
diff --git a/Bindings/mtd/gpmi-nand.txt b/Bindings/mtd/gpmi-nand.txt
index a011fdf61dbf..d02acaff3c35 100644
--- a/Bindings/mtd/gpmi-nand.txt
+++ b/Bindings/mtd/gpmi-nand.txt
@@ -1,7 +1,7 @@
 * Freescale General-Purpose Media Interface (GPMI)
 
 The GPMI nand controller provides an interface to control the
-NAND flash chips. We support only one NAND chip now.
+NAND flash chips.
 
 Required properties:
   - compatible : should be "fsl,<chip>-gpmi-nand"
diff --git a/Bindings/mtd/hisi504-nand.txt b/Bindings/mtd/hisi504-nand.txt
new file mode 100644
index 000000000000..2e35f0662912
--- /dev/null
+++ b/Bindings/mtd/hisi504-nand.txt
@@ -0,0 +1,47 @@
+Hisilicon Hip04 Soc NAND controller DT binding
+
+Required properties:
+
+- compatible:          Should be "hisilicon,504-nfc".
+- reg:                 The first contains base physical address and size of
+                       NAND controller's registers. The second contains base
+                       physical address and size of NAND controller's buffer.
+- interrupts:          Interrupt number for nfc.
+- nand-bus-width:      See nand.txt.
+- nand-ecc-mode:       Support none and hw ecc mode.
+- #address-cells:      Partition address, should be set 1.
+- #size-cells:         Partition size, should be set 1.
+
+Optional properties:
+
+- nand-ecc-strength:   Number of bits to correct per ECC step.
+- nand-ecc-step-size:  Number of data bytes covered by a single ECC step.
+
+The following ECC strength and step size are currently supported:
+
+ - nand-ecc-strength = <16>, nand-ecc-step-size = <1024>
+
+Flash chip may optionally contain additional sub-nodes describing partitions of
+the address space. See partition.txt for more detail.
+
+Example:
+
+	nand: nand@4020000 {
+		compatible = "hisilicon,504-nfc";
+		reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
+		interrupts = <0 379 4>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "nand_text";
+			reg = <0x00000000 0x00400000>;
+		};
+
+		...
+
+	};
diff --git a/Bindings/mtd/mtd-physmap.txt b/Bindings/mtd/mtd-physmap.txt
index 61c5ec850f2f..4a0a48bf4ecb 100644
--- a/Bindings/mtd/mtd-physmap.txt
+++ b/Bindings/mtd/mtd-physmap.txt
@@ -4,8 +4,8 @@ Flash chips (Memory Technology Devices) are often used for solid state
 file systems on embedded devices.
 
  - compatible : should contain the specific model of mtd chip(s)
-   used, if known, followed by either "cfi-flash", "jedec-flash"
-   or "mtd-ram".
+   used, if known, followed by either "cfi-flash", "jedec-flash",
+   "mtd-ram" or "mtd-rom".
  - reg : Address range(s) of the mtd chip(s)
    It's possible to (optionally) define multiple "reg" tuples so that
    non-identical chips can be described in one node.
@@ -36,6 +36,11 @@ are defined:
  - vendor-id : Contains the flash chip's vendor id (1 byte).
  - device-id : Contains the flash chip's device id (1 byte).
 
+For ROM compatible devices (and ROM fallback from cfi-flash), the following
+additional (optional) property is defined:
+
+ - erase-size : The chip's physical erase block size in bytes.
+
 The device tree may optionally contain sub-nodes describing partitions of the
 address space. See partition.txt for more detail.
 
diff --git a/Bindings/mtd/sunxi-nand.txt b/Bindings/mtd/sunxi-nand.txt
new file mode 100644
index 000000000000..0273adb8638c
--- /dev/null
+++ b/Bindings/mtd/sunxi-nand.txt
@@ -0,0 +1,45 @@
+Allwinner NAND Flash Controller (NFC)
+
+Required properties:
+- compatible : "allwinner,sun4i-a10-nand".
+- reg : shall contain registers location and length for data and reg.
+- interrupts : shall define the nand controller interrupt.
+- #address-cells: shall be set to 1. Encode the nand CS.
+- #size-cells : shall be set to 0.
+- clocks : shall reference nand controller clocks.
+- clock-names : nand controller internal clock names. Shall contain :
+    * "ahb" : AHB gating clock
+    * "mod" : nand controller clock
+
+Optional children nodes:
+Children nodes represent the available nand chips.
+
+Optional properties:
+- allwinner,rb : shall contain the native Ready/Busy ids.
+ or
+- rb-gpios : shall contain the gpios used as R/B pins.
+- nand-ecc-mode : one of the supported ECC modes ("hw", "hw_syndrome", "soft",
+  "soft_bch" or "none")
+
+see Documentation/devicetree/mtd/nand.txt for generic bindings.
+
+
+Examples:
+nfc: nand@01c03000 {
+	compatible = "allwinner,sun4i-a10-nand";
+	reg = <0x01c03000 0x1000>;
+	interrupts = <0 37 1>;
+	clocks = <&ahb_gates 13>, <&nand_clk>;
+	clock-names = "ahb", "mod";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		allwinner,rb = <0>;
+		nand-ecc-mode = "soft_bch";
+	};
+};
diff --git a/Bindings/net/amd-xgbe-phy.txt b/Bindings/net/amd-xgbe-phy.txt
index 42409bfe04c4..33df3932168e 100644
--- a/Bindings/net/amd-xgbe-phy.txt
+++ b/Bindings/net/amd-xgbe-phy.txt
@@ -7,17 +7,38 @@ Required properties:
    - SerDes Rx/Tx registers
    - SerDes integration registers (1/2)
    - SerDes integration registers (2/2)
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the amd-xgbe-phy interrupt.
 
 Optional properties:
 - amd,speed-set: Speed capabilities of the device
     0 - 1GbE and 10GbE (default)
     1 - 2.5GbE and 10GbE
 
+The following optional properties are represented by an array with each
+value corresponding to a particular speed. The first array value represents
+the setting for the 1GbE speed, the second value for the 2.5GbE speed and
+the third value for the 10GbE speed.  All three values are required if the
+property is used.
+- amd,serdes-blwc: Baseline wandering correction enablement
+    0 - Off
+    1 - On
+- amd,serdes-cdr-rate: CDR rate speed selection
+- amd,serdes-pq-skew: PQ (data sampling) skew
+- amd,serdes-tx-amp: TX amplitude boost
+
 Example:
 	xgbe_phy@e1240800 {
 		compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
 		reg = <0 0xe1240800 0 0x00400>,
 		      <0 0xe1250000 0 0x00060>,
 		      <0 0xe1250080 0 0x00004>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 323 4>;
 		amd,speed-set = <0>;
+		amd,serdes-blwc = <1>, <1>, <0>;
+		amd,serdes-cdr-rate = <2>, <2>, <7>;
+		amd,serdes-pq-skew = <10>, <10>, <30>;
+		amd,serdes-tx-amp = <15>, <15>, <10>;
 	};
diff --git a/Bindings/net/amd-xgbe.txt b/Bindings/net/amd-xgbe.txt
index 41354f730beb..26efd526d16c 100644
--- a/Bindings/net/amd-xgbe.txt
+++ b/Bindings/net/amd-xgbe.txt
@@ -7,7 +7,10 @@ Required properties:
    - PCS registers
 - interrupt-parent: Should be the phandle for the interrupt controller
   that services interrupts for this device
-- interrupts: Should contain the amd-xgbe interrupt
+- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt
+  listed is required and is the general device interrupt. If the optional
+  amd,per-channel-interrupt property is specified, then one additional
+  interrupt for each DMA channel supported by the device should be specified
 - clocks:
    - DMA clock for the amd-xgbe device (used for calculating the
      correct Rx interrupt watchdog timer value on a DMA channel
@@ -23,6 +26,9 @@ Optional properties:
 - mac-address: mac address to be assigned to the device. Can be overridden
   by UEFI.
 - dma-coherent: Present if dma operations are coherent
+- amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate
+  a unique interrupt for each DMA channel - this requires an additional
+  interrupt be configured for each DMA channel
 
 Example:
 	xgbe@e0700000 {
@@ -30,7 +36,9 @@ Example:
 		reg = <0 0xe0700000 0 0x80000>,
 		      <0 0xe0780000 0 0x80000>;
 		interrupt-parent = <&gic>;
-		interrupts = <0 325 4>;
+		interrupts = <0 325 4>,
+			     <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>;
+		amd,per-channel-interrupt;
 		clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
 		clock-names = "dma_clk", "ptp_clk";
 		phy-handle = <&phy>;
diff --git a/Bindings/net/apm-xgene-enet.txt b/Bindings/net/apm-xgene-enet.txt
index ebcad25efd0a..cfcc52705ed8 100644
--- a/Bindings/net/apm-xgene-enet.txt
+++ b/Bindings/net/apm-xgene-enet.txt
@@ -3,7 +3,7 @@ APM X-Gene SoC Ethernet nodes
 Ethernet nodes are defined to describe on-chip ethernet interfaces in
 APM X-Gene SoC.
 
-Required properties:
+Required properties for all the ethernet interfaces:
 - compatible: Should be "apm,xgene-enet"
 - reg: Address and length of the register set for the device. It contains the
   information of registers in the same order as described by reg-names
@@ -15,6 +15,8 @@ Required properties:
 - clocks: Reference to the clock entry.
 - local-mac-address: MAC address assigned to this device
 - phy-connection-type: Interface type between ethernet device and PHY device
+
+Required properties for ethernet interfaces that have external PHY:
 - phy-handle: Reference to a PHY node connected to this device
 
 - mdio: Device tree subnode with the following required properties:
diff --git a/Bindings/net/broadcom-mdio-unimac.txt b/Bindings/net/broadcom-mdio-unimac.txt
new file mode 100644
index 000000000000..ab0bb4247d14
--- /dev/null
+++ b/Bindings/net/broadcom-mdio-unimac.txt
@@ -0,0 +1,39 @@
+* Broadcom UniMAC MDIO bus controller
+
+Required properties:
+- compatible: should one from "brcm,genet-mdio-v1", "brcm,genet-mdio-v2",
+  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4" or "brcm,unimac-mdio"
+- reg: address and length of the regsiter set for the device, first one is the
+  base register, and the second one is optional and for indirect accesses to
+  larger than 16-bits MDIO transactions
+- reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw"
+- #size-cells: must be 1
+- #address-cells: must be 0
+
+Optional properties:
+- interrupts: must be one if the interrupt is shared with the Ethernet MAC or
+  Ethernet switch this MDIO block is integrated from, or must be two, if there
+  are two separate interrupts, first one must be "mdio done" and second must be
+  for "mdio error"
+- interrupt-names: must be "mdio_done_error" when there is a share interrupt fed
+  to this hardware block, or must be "mdio_done" for the first interrupt and
+  "mdio_error" for the second when there are separate interrupts
+
+Child nodes of this MDIO bus controller node are standard Ethernet PHY device
+nodes as described in Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+
+mdio@403c0 {
+	compatible = "brcm,unimac-mdio";
+	reg = <0x403c0 0x8 0x40300 0x18>;
+	reg-names = "mdio", "mdio_indir_rw";
+	#size-cells = <1>;
+	#address-cells = <0>;
+
+	...
+	phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
diff --git a/Bindings/net/broadcom-sf2.txt b/Bindings/net/broadcom-sf2.txt
new file mode 100644
index 000000000000..30d487597ecb
--- /dev/null
+++ b/Bindings/net/broadcom-sf2.txt
@@ -0,0 +1,78 @@
+* Broadcom Starfighter 2 integrated swich
+
+Required properties:
+
+- compatible: should be "brcm,bcm7445-switch-v4.0"
+- reg: addresses and length of the register sets for the device, must be 6
+  pairs of register addresses and lengths
+- interrupts: interrupts for the devices, must be two interrupts
+- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
+- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
+- #size-cells: must be 0
+- #address-cells: must be 2, see dsa/dsa.txt
+
+Subnodes:
+
+The integrated switch subnode should be specified according to the binding
+described in dsa/dsa.txt.
+
+Optional properties:
+
+- reg-names: litteral names for the device base register addresses, when present
+  must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb"
+
+- interrupt-names: litternal names for the device interrupt lines, when present
+  must be: "switch_0" and "switch_1"
+
+- brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the
+  switch
+
+- brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported
+  by the switch
+
+- brcm,fcb-pause-override: boolean property, if present indicates that the switch
+  supports Failover Control Block pause override capability
+
+- brcm,acb-packets-inflight: boolean property, if present indicates that the switch
+  Admission Control Block supports reporting the number of packets in-flight in a
+  switch queue
+
+Example:
+
+switch_top@f0b00000 {
+	compatible = "simple-bus";
+	#size-cells = <1>;
+	#address-cells = <1>;
+	ranges = <0 0xf0b00000 0x40804>;
+
+	ethernet_switch@0 {
+		compatible = "brcm,bcm7445-switch-v4.0";
+		#size-cells = <0>;
+		#address-cells = <2>;
+		reg = <0x0 0x40000
+			0x40000 0x110
+			0x40340 0x30
+			0x40380 0x30
+			0x40400 0x34
+			0x40600 0x208>;
+		interrupts = <0 0x18 0
+				0 0x19 0>;
+		brcm,num-gphy = <1>;
+		brcm,num-rgmii-ports = <2>;
+		brcm,fcb-pause-override;
+		brcm,acb-packets-inflight;
+
+		...
+		switch@0 {
+			reg = <0 0>;
+			#size-cells = <0>;
+			#address-cells <1>;
+
+			port@0 {
+				label = "gphy";
+				reg = <0>;
+			};
+			...
+		};
+	};
+};
diff --git a/Bindings/net/broadcom-systemport.txt b/Bindings/net/broadcom-systemport.txt
index aa7ad622259d..877da34145b0 100644
--- a/Bindings/net/broadcom-systemport.txt
+++ b/Bindings/net/broadcom-systemport.txt
@@ -3,7 +3,7 @@
 Required properties:
 - compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
 - reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the the rx
+- interrupts: interrupts for the device, first cell must be for the rx
   interrupts, and the second cell should be for the transmit queues. An
   optional third interrupt cell for Wake-on-LAN can be specified
 - local-mac-address: Ethernet MAC address (48 bits) of this adapter
diff --git a/Bindings/net/can/c_can.txt b/Bindings/net/can/c_can.txt
index 8f1ae81228e3..5a1d8b0c39e9 100644
--- a/Bindings/net/can/c_can.txt
+++ b/Bindings/net/can/c_can.txt
@@ -4,6 +4,8 @@ Bosch C_CAN/D_CAN controller Device Tree Bindings
 Required properties:
 - compatible		: Should be "bosch,c_can" for C_CAN controllers and
 			  "bosch,d_can" for D_CAN controllers.
+			  Can be "ti,dra7-d_can", "ti,am3352-d_can" or
+			  "ti,am4372-d_can".
 - reg			: physical base address and size of the C_CAN/D_CAN
 			  registers map
 - interrupts		: property with a value describing the interrupt
@@ -12,6 +14,9 @@ Required properties:
 Optional properties:
 - ti,hwmods		: Must be "d_can<n>" or "c_can<n>", n being the
 			  instance number
+- syscon-raminit	: Handle to system control region that contains the
+			  RAMINIT register, register offset to the RAMINIT
+			  register and the CAN instance number (0 offset).
 
 Note: "ti,hwmods" field is used to fetch the base address and irq
 resources from TI, omap hwmod data base during device registration.
diff --git a/Bindings/net/can/m_can.txt b/Bindings/net/can/m_can.txt
new file mode 100644
index 000000000000..9e331777c203
--- /dev/null
+++ b/Bindings/net/can/m_can.txt
@@ -0,0 +1,67 @@
+Bosch MCAN controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible		: Should be "bosch,m_can" for M_CAN controllers
+- reg			: physical base address and size of the M_CAN
+			  registers map and Message RAM
+- reg-names		: Should be "m_can" and "message_ram"
+- interrupts		: Should be the interrupt number of M_CAN interrupt
+			  line 0 and line 1, could be same if sharing
+			  the same interrupt.
+- interrupt-names	: Should contain "int0" and "int1"
+- clocks		: Clocks used by controller, should be host clock
+			  and CAN clock.
+- clock-names		: Should contain "hclk" and "cclk"
+- pinctrl-<n>		: Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt
+- pinctrl-names 	: Names corresponding to the numbered pinctrl states
+- bosch,mram-cfg	: Message RAM configuration data.
+			  Multiple M_CAN instances can share the same Message
+			  RAM and each element(e.g Rx FIFO or Tx Buffer and etc)
+			  number in Message RAM is also configurable,
+			  so this property is telling driver how the shared or
+			  private Message RAM are used by this M_CAN controller.
+
+			  The format should be as follows:
+			  <offset sidf_elems xidf_elems rxf0_elems rxf1_elems
+			   rxb_elems txe_elems txb_elems>
+			  The 'offset' is an address offset of the Message RAM
+			  where the following elements start from. This is
+			  usually set to 0x0 if you're using a private Message
+			  RAM. The remain cells are used to specify how many
+			  elements are used for each FIFO/Buffer.
+
+			  M_CAN includes the following elements according to user manual:
+			  11-bit Filter	0-128 elements / 0-128 words
+			  29-bit Filter	0-64 elements / 0-128 words
+			  Rx FIFO 0	0-64 elements / 0-1152 words
+			  Rx FIFO 1	0-64 elements / 0-1152 words
+			  Rx Buffers	0-64 elements / 0-1152 words
+			  Tx Event FIFO	0-32 elements / 0-64 words
+			  Tx Buffers	0-32 elements / 0-576 words
+
+			  Please refer to 2.4.1 Message RAM Configuration in
+			  Bosch M_CAN user manual for details.
+
+Example:
+SoC dtsi:
+m_can1: can@020e8000 {
+	compatible = "bosch,m_can";
+	reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
+	reg-names = "m_can", "message_ram";
+	interrupts = <0 114 0x04>,
+		     <0 114 0x04>;
+	interrupt-names = "int0", "int1";
+	clocks = <&clks IMX6SX_CLK_CANFD>,
+		 <&clks IMX6SX_CLK_CANFD>;
+	clock-names = "hclk", "cclk";
+	bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
+	status = "disabled";
+};
+
+Board dts:
+&m_can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_m_can1>;
+	status = "enabled";
+};
diff --git a/Bindings/net/can/rcar_can.txt b/Bindings/net/can/rcar_can.txt
new file mode 100644
index 000000000000..002d8440bf66
--- /dev/null
+++ b/Bindings/net/can/rcar_can.txt
@@ -0,0 +1,43 @@
+Renesas R-Car CAN controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible: "renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
+	      "renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
+	      "renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
+	      "renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
+- reg: physical base address and size of the R-Car CAN register map.
+- interrupts: interrupt specifier for the sole interrupt.
+- clocks: phandles and clock specifiers for 3 CAN clock inputs.
+- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
+- pinctrl-0: pin control group to be used for this controller.
+- pinctrl-names: must be "default".
+
+Optional properties:
+- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
+			    <0x0> (default) : Peripheral clock (clkp1)
+			    <0x1> : Peripheral clock (clkp2)
+			    <0x3> : Externally input clock
+
+Example
+-------
+
+SoC common .dtsi file:
+
+	can0: can@e6e80000 {
+		compatible = "renesas,can-r8a7791";
+		reg = <0 0xe6e80000 0 0x1000>;
+		interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
+			 <&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
+		clock-names = "clkp1", "clkp2", "can_clk";
+		status = "disabled";
+	};
+
+Board specific .dts file:
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/Bindings/net/cpsw.txt b/Bindings/net/cpsw.txt
index ae2b8b7f9c38..33fe8462edf4 100644
--- a/Bindings/net/cpsw.txt
+++ b/Bindings/net/cpsw.txt
@@ -24,15 +24,17 @@ Optional properties:
 - ti,hwmods		: Must be "cpgmac0"
 - no_bd_ram		: Must be 0 or 1
 - dual_emac		: Specifies Switch to act as Dual EMAC
+- syscon		: Phandle to the system control device node, which is
+			  the control module device of the am33x
 
 Slave Properties:
 Required properties:
 - phy_id		: Specifies slave phy id
 - phy-mode		: See ethernet.txt file in the same directory
-- mac-address		: See ethernet.txt file in the same directory
 
 Optional properties:
 - dual_emac_res_vlan	: Specifies VID to be used to segregate the ports
+- mac-address		: See ethernet.txt file in the same directory
 
 Note: "ti,hwmods" field is used to fetch the base address and irq
 resources from TI, omap hwmod data base during device registration.
@@ -57,6 +59,7 @@ Examples:
 		active_slave = <0>;
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
+		syscon = <&cm>;
 		cpsw_emac0: slave@0 {
 			phy_id = <&davinci_mdio>, <0>;
 			phy-mode = "rgmii-txid";
@@ -85,6 +88,7 @@ Examples:
 		active_slave = <0>;
 		cpts_clock_mult = <0x80000000>;
 		cpts_clock_shift = <29>;
+		syscon = <&cm>;
 		cpsw_emac0: slave@0 {
 			phy_id = <&davinci_mdio>, <0>;
 			phy-mode = "rgmii-txid";
diff --git a/Bindings/net/davicom-dm9000.txt b/Bindings/net/davicom-dm9000.txt
index 28767ed7c1bd..5224bf05f6f8 100644
--- a/Bindings/net/davicom-dm9000.txt
+++ b/Bindings/net/davicom-dm9000.txt
@@ -11,6 +11,8 @@ Required properties:
 Optional properties:
 - davicom,no-eeprom : Configuration EEPROM is not available
 - davicom,ext-phy : Use external PHY
+- reset-gpios : phandle of gpio that will be used to reset chip during probe
+- vcc-supply : phandle of regulator that will be used to enable power to chip
 
 Example:
 
@@ -21,4 +23,6 @@ Example:
 		interrupts = <7 4>;
 		local-mac-address = [00 00 de ad be ef];
 		davicom,no-eeprom;
+		reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&eth0_power>;
 	};
diff --git a/Bindings/net/davinci_emac.txt b/Bindings/net/davinci_emac.txt
index 032808843f90..24c5cdaba8d2 100644
--- a/Bindings/net/davinci_emac.txt
+++ b/Bindings/net/davinci_emac.txt
@@ -4,7 +4,8 @@ This file provides information, what the device node
 for the davinci_emac interface contains.
 
 Required properties:
-- compatible: "ti,davinci-dm6467-emac" or "ti,am3517-emac"
+- compatible: "ti,davinci-dm6467-emac", "ti,am3517-emac" or
+  "ti,dm816-emac"
 - reg: Offset and length of the register set for the device
 - ti,davinci-ctrl-reg-offset: offset to control register
 - ti,davinci-ctrl-mod-reg-offset: offset to control module register
diff --git a/Bindings/net/dsa/dsa.txt b/Bindings/net/dsa/dsa.txt
index 49f4f7ae3f51..e124847443f8 100644
--- a/Bindings/net/dsa/dsa.txt
+++ b/Bindings/net/dsa/dsa.txt
@@ -10,7 +10,7 @@ Required properties:
 - dsa,ethernet		: Should be a phandle to a valid Ethernet device node
 - dsa,mii-bus		: Should be a phandle to a valid MDIO bus device node
 
-Optionnal properties:
+Optional properties:
 - interrupts		: property with a value describing the switch
 			  interrupt number (not supported by the driver)
 
@@ -23,6 +23,13 @@ Each of these switch child nodes should have the following required properties:
 - #address-cells	: Must be 1
 - #size-cells		: Must be 0
 
+A switch child node has the following optional property:
+
+- eeprom-length		: Set to the length of an EEPROM connected to the
+			  switch. Must be set if the switch can not detect
+			  the presence and/or size of a connected EEPROM,
+			  otherwise optional.
+
 A switch may have multiple "port" children nodes
 
 Each port children node must have the following mandatory properties:
@@ -39,6 +46,22 @@ Optionnal property:
 			  This property is only used when switches are being
 			  chained/cascaded together.
 
+- phy-handle		: Phandle to a PHY on an external MDIO bus, not the
+			  switch internal one. See
+			  Documentation/devicetree/bindings/net/ethernet.txt
+			  for details.
+
+- phy-mode		: String representing the connection to the designated
+			  PHY node specified by the 'phy-handle' property. See
+			  Documentation/devicetree/bindings/net/ethernet.txt
+			  for details.
+
+Optional subnodes:
+- fixed-link		: Fixed-link subnode describing a link to a non-MDIO
+			  managed entity. See
+			  Documentation/devicetree/bindings/net/fixed-link.txt
+			  for details.
+
 Example:
 
 	dsa@0 {
@@ -58,6 +81,7 @@ Example:
 			port@0 {
 				reg = <0>;
 				label = "lan1";
+				phy-handle = <&phy0>;
 			};
 
 			port@1 {
diff --git a/Bindings/net/emac_rockchip.txt b/Bindings/net/emac_rockchip.txt
new file mode 100644
index 000000000000..8dc1c79fef7f
--- /dev/null
+++ b/Bindings/net/emac_rockchip.txt
@@ -0,0 +1,50 @@
+* ARC EMAC 10/100 Ethernet platform driver for Rockchip Rk3066/RK3188 SoCs
+
+Required properties:
+- compatible: Should be "rockchip,rk3066-emac" or "rockchip,rk3188-emac"
+  according to the target SoC.
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the EMAC interrupts
+- rockchip,grf: phandle to the syscon grf used to control speed and mode
+  for emac.
+- phy: see ethernet.txt file in the same directory.
+- phy-mode: see ethernet.txt file in the same directory.
+
+Optional properties:
+- phy-supply: phandle to a regulator if the PHY needs one
+
+Clock handling:
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "hclk" for the host clock needed to calculate and set
+  polling period of EMAC and "macref" for the reference clock needed to transfer
+  data to and from the phy.
+
+Child nodes of the driver are the individual PHY devices connected to the
+MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
+
+Examples:
+
+ethernet@10204000 {
+	compatible = "rockchip,rk3188-emac";
+	reg = <0xc0fc2000 0x3c>;
+	interrupts = <6>;
+	mac-address = [ 00 11 22 33 44 55 ];
+
+	clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+	clock-names = "hclk", "macref";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+	rockchip,grf = <&grf>;
+
+	phy = <&phy0>;
+	phy-mode = "rmii";
+	phy-supply = <&vcc_rmii>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy0: ethernet-phy@0 {
+	      reg = <1>;
+	};
+};
diff --git a/Bindings/net/fsl-fec.txt b/Bindings/net/fsl-fec.txt
index 8a2c7b55ec16..a9eb611bee68 100644
--- a/Bindings/net/fsl-fec.txt
+++ b/Bindings/net/fsl-fec.txt
@@ -16,6 +16,14 @@ Optional properties:
 - phy-handle : phandle to the PHY device connected to this device.
 - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
   Use instead of phy-handle.
+- fsl,num-tx-queues : The property is valid for enet-avb IP, which supports
+  hw multi queues. Should specify the tx queue number, otherwise set tx queue
+  number to 1.
+- fsl,num-rx-queues : The property is valid for enet-avb IP, which supports
+  hw multi queues. Should specify the rx queue number, otherwise set rx queue
+  number to 1.
+- fsl,magic-packet : If present, indicates that the hardware supports waking
+  up via magic packet.
 
 Optional subnodes:
 - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
diff --git a/Bindings/net/fsl-tsec-phy.txt b/Bindings/net/fsl-tsec-phy.txt
index be6ea8960f20..1e97532a0b79 100644
--- a/Bindings/net/fsl-tsec-phy.txt
+++ b/Bindings/net/fsl-tsec-phy.txt
@@ -8,7 +8,16 @@ of how to define a PHY.
 Required properties:
   - reg : Offset and length of the register set for the device
   - compatible : Should define the compatible device type for the
-    mdio.  Currently, this is most likely to be "fsl,gianfar-mdio"
+    mdio. Currently supported strings/devices are:
+	- "fsl,gianfar-tbi"
+	- "fsl,gianfar-mdio"
+	- "fsl,etsec2-tbi"
+	- "fsl,etsec2-mdio"
+	- "fsl,ucc-mdio"
+	- "fsl,fman-mdio"
+    When device_type is "mdio", the following strings are also considered:
+	- "gianfar"
+	- "ucc_geth_phy"
 
 Example:
 
diff --git a/Bindings/net/hisilicon-hip04-net.txt b/Bindings/net/hisilicon-hip04-net.txt
new file mode 100644
index 000000000000..988fc694b663
--- /dev/null
+++ b/Bindings/net/hisilicon-hip04-net.txt
@@ -0,0 +1,88 @@
+Hisilicon hip04 Ethernet Controller
+
+* Ethernet controller node
+
+Required properties:
+- compatible: should be "hisilicon,hip04-mac".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device.
+- port-handle: <phandle port channel>
+	phandle, specifies a reference to the syscon ppe node
+	port, port number connected to the controller
+	channel, recv channel start from channel * number (RX_DESC_NUM)
+- phy-mode: see ethernet.txt [1].
+
+Optional properties:
+- phy-handle: see ethernet.txt [1].
+
+[1] Documentation/devicetree/bindings/net/ethernet.txt
+
+
+* Ethernet ppe node:
+Control rx & tx fifos of all ethernet controllers.
+Have 2048 recv channels shared by all ethernet controllers, only if no overlap.
+Each controller's recv channel start from channel * number (RX_DESC_NUM).
+
+Required properties:
+- compatible: "hisilicon,hip04-ppe", "syscon".
+- reg: address and length of the register set for the device.
+
+
+* MDIO bus node:
+
+Required properties:
+
+- compatible: should be "hisilicon,hip04-mdio".
+- Inherits from MDIO bus node binding [2]
+[2] Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+	mdio {
+		compatible = "hisilicon,hip04-mdio";
+		reg = <0x28f1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			marvell,reg-init = <18 0x14 0 0x8001>;
+		};
+
+		phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			marvell,reg-init = <18 0x14 0 0x8001>;
+		};
+	};
+
+	ppe: ppe@28c0000 {
+		compatible = "hisilicon,hip04-ppe", "syscon";
+		reg = <0x28c0000 0x10000>;
+	};
+
+	fe: ethernet@28b0000 {
+		compatible = "hisilicon,hip04-mac";
+		reg = <0x28b0000 0x10000>;
+		interrupts = <0 413 4>;
+		phy-mode = "mii";
+		port-handle = <&ppe 31 0>;
+	};
+
+	ge0: ethernet@2800000 {
+		compatible = "hisilicon,hip04-mac";
+		reg = <0x2800000 0x10000>;
+		interrupts = <0 402 4>;
+		phy-mode = "sgmii";
+		port-handle = <&ppe 0 1>;
+		phy-handle = <&phy0>;
+	};
+
+	ge8: ethernet@2880000 {
+		compatible = "hisilicon,hip04-mac";
+		reg = <0x2880000 0x10000>;
+		interrupts = <0 410 4>;
+		phy-mode = "sgmii";
+		port-handle = <&ppe 8 2>;
+		phy-handle = <&phy1>;
+	};
diff --git a/Bindings/net/keystone-netcp.txt b/Bindings/net/keystone-netcp.txt
new file mode 100644
index 000000000000..f9c07710478d
--- /dev/null
+++ b/Bindings/net/keystone-netcp.txt
@@ -0,0 +1,197 @@
+This document describes the device tree bindings associated with the
+keystone network coprocessor(NetCP) driver support.
+
+The network coprocessor (NetCP) is a hardware accelerator that processes
+Ethernet packets. NetCP has a gigabit Ethernet (GbE) subsytem with a ethernet
+switch sub-module to send and receive packets. NetCP also includes a packet
+accelerator (PA) module to perform packet classification operations such as
+header matching, and packet modification operations such as checksum
+generation. NetCP can also optionally include a Security Accelerator (SA)
+capable of performing IPSec operations on ingress/egress packets.
+
+Keystone II SoC's also have a 10 Gigabit Ethernet Subsystem (XGbE) which
+includes a 3-port Ethernet switch sub-module capable of 10Gb/s and 1Gb/s rates
+per Ethernet port.
+
+Keystone NetCP driver has a plug-in module architecture where each of the NetCP
+sub-modules exist as a loadable kernel module which plug in to the netcp core.
+These sub-modules are represented as "netcp-devices" in the dts bindings. It is
+mandatory to have the ethernet switch sub-module for the ethernet interface to
+be operational. Any other sub-module like the PA is optional.
+
+NetCP Ethernet SubSystem Layout:
+
+-----------------------------
+  NetCP subsystem(10G or 1G)
+-----------------------------
+	|
+	|-> NetCP Devices ->	|
+	|			|-> GBE/XGBE Switch
+	|			|
+	|			|-> Packet Accelerator
+	|			|
+	|			|-> Security Accelerator
+	|
+	|
+	|
+	|-> NetCP Interfaces ->	|
+				|-> Ethernet Port 0
+				|
+				|-> Ethernet Port 1
+				|
+				|-> Ethernet Port 2
+				|
+				|-> Ethernet Port 3
+
+
+NetCP subsystem properties:
+Required properties:
+- compatible:	Should be "ti,netcp-1.0"
+- clocks:	phandle to the reference clocks for the subsystem.
+- dma-id:	Navigator packet dma instance id.
+
+Optional properties:
+- reg:		register location and the size for the following register
+		regions in the specified order.
+		- Efuse MAC address register
+- dma-coherent:	Present if dma operations are coherent
+- big-endian:	Keystone devices can be operated in a mode where the DSP is in
+		the big endian mode. In such cases enable this option. This
+		option should also be enabled if the ARM is operated in
+		big endian mode with the DSP in little endian.
+
+NetCP device properties: Device specification for NetCP sub-modules.
+1Gb/10Gb (gbe/xgbe) ethernet switch sub-module specifications.
+Required properties:
+- label:	Must be "netcp-gbe" for 1Gb & "netcp-xgbe" for 10Gb.
+- reg:		register location and the size for the following register
+		regions in the specified order.
+		- subsystem registers
+		- serdes registers
+- tx-channel:	the navigator packet dma channel name for tx.
+- tx-queue:	the navigator queue number associated with the tx dma channel.
+- interfaces:	specification for each of the switch port to be registered as a
+		network interface in the stack.
+-- slave-port:	Switch port number, 0 based numbering.
+-- link-interface:	type of link interface, supported options are
+			- mac<->mac auto negotiate mode: 0
+			- mac<->phy mode: 1
+			- mac<->mac forced mode: 2
+			- mac<->fiber mode: 3
+			- mac<->phy mode with no mdio: 4
+			- 10Gb mac<->phy mode : 10
+			- 10Gb mac<->mac forced mode : 11
+----phy-handle:	phandle to PHY device
+
+Optional properties:
+- enable-ale:	NetCP driver keeps the address learning feature in the ethernet
+		switch module disabled. This attribute is to enable the address
+		learning.
+- secondary-slave-ports:	specification for each of the switch port not be
+				registered as a network interface. NetCP driver
+				will only initialize these ports and attach PHY
+				driver to them if needed.
+
+NetCP interface properties: Interface specification for NetCP sub-modules.
+Required properties:
+- rx-channel:	the navigator packet dma channel name for rx.
+- rx-queue:	the navigator queue number associated with rx dma channel.
+- rx-pool:	specifies the number of descriptors to be used & the region-id
+		for creating the rx descriptor pool.
+- tx-pool:	specifies the number of descriptors to be used & the region-id
+		for creating the tx descriptor pool.
+- rx-queue-depth:	number of descriptors in each of the free descriptor
+			queue (FDQ) for the pktdma Rx flow. There can be at
+			present a maximum of 4 queues per Rx flow.
+- rx-buffer-size:	the buffer size for each of the Rx flow FDQ.
+- tx-completion-queue:	the navigator queue number where the descriptors are
+			recycled after Tx DMA completion.
+
+Optional properties:
+- efuse-mac:	If this is 1, then the MAC address for the interface is
+		obtained from the device efuse mac address register
+- local-mac-address:	the driver is designed to use the of_get_mac_address api
+			only if efuse-mac is 0. When efuse-mac is 0, the MAC
+			address is obtained from local-mac-address. If this
+			attribute is not present, then the driver will use a
+			random MAC address.
+- "netcp-device label":	phandle to the device specification for each of NetCP
+			sub-module attached to this interface.
+
+Example binding:
+
+netcp: netcp@2090000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	dma-coherent;
+	/* big-endian; */
+	dma-id = <0>;
+
+	netcp-devices {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		gbe@0x2090000 {
+			label = "netcp-gbe";
+			reg = <0x2090000 0xf00>;
+			/* enable-ale; */
+			tx-queue = <648>;
+			tx-channel = <8>;
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface	= <4>;
+				};
+				gbe1: interface-1 {
+					slave-port = <1>;
+					link-interface	= <4>;
+				};
+			};
+
+			secondary-slave-ports {
+				port-2 {
+					slave-port = <2>;
+					link-interface	= <2>;
+				};
+				port-3 {
+					slave-port = <3>;
+					link-interface	= <2>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = <22>;
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <8704>;
+			tx-completion-queue = <8706>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+
+		};
+		interface-1 {
+			rx-channel = <23>;
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <8705>;
+			tx-completion-queue = <8707>;
+			efuse-mac = <0>;
+			local-mac-address = [02 18 31 7e 3e 6f];
+			netcp-gbe = <&gbe1>;
+		};
+	};
+};
diff --git a/Bindings/net/marvell-pxa168.txt b/Bindings/net/marvell-pxa168.txt
new file mode 100644
index 000000000000..845a148a346e
--- /dev/null
+++ b/Bindings/net/marvell-pxa168.txt
@@ -0,0 +1,36 @@
+* Marvell PXA168 Ethernet Controller
+
+Required properties:
+- compatible: should be "marvell,pxa168-eth".
+- reg: address and length of the register set for the device.
+- interrupts: interrupt for the device.
+- clocks: pointer to the clock for the device.
+
+Optional properties:
+- port-id: Ethernet port number. Should be '0','1' or '2'.
+- #address-cells: must be 1 when using sub-nodes.
+- #size-cells: must be 0 when using sub-nodes.
+- phy-handle: see ethernet.txt file in the same directory.
+- local-mac-address: see ethernet.txt file in the same directory.
+
+Sub-nodes:
+Each PHY can be represented as a sub-node. This is not mandatory.
+
+Sub-nodes required properties:
+- reg: the MDIO address of the PHY.
+
+Example:
+
+	eth0: ethernet@f7b90000 {
+		compatible = "marvell,pxa168-eth";
+		reg = <0xf7b90000 0x10000>;
+		clocks = <&chip CLKID_GETH0>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy-handle = <&ethphy0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
diff --git a/Bindings/net/meson-dwmac.txt b/Bindings/net/meson-dwmac.txt
new file mode 100644
index 000000000000..ec633d74a8a8
--- /dev/null
+++ b/Bindings/net/meson-dwmac.txt
@@ -0,0 +1,25 @@
+* Amlogic Meson DWMAC Ethernet controller
+
+The device inherits all the properties of the dwmac/stmmac devices
+described in the file net/stmmac.txt with the following changes.
+
+Required properties:
+
+- compatible: should be "amlogic,meson6-dwmac" along with "snps,dwmac"
+	      and any applicable more detailed version number
+	      described in net/stmmac.txt
+
+- reg: should contain a register range for the dwmac controller and
+       another one for the Amlogic specific configuration
+
+Example:
+
+	ethmac: ethernet@c9410000 {
+		compatible = "amlogic,meson6-dwmac", "snps,dwmac";
+		reg = <0xc9410000 0x10000
+		       0xc1108108 0x4>;
+		interrupts = <0 8 1>;
+		interrupt-names = "macirq";
+		clocks = <&clk81>;
+		clock-names = "stmmaceth";
+	}
diff --git a/Bindings/net/micrel.txt b/Bindings/net/micrel.txt
index 98a3e61f9ee8..87496a8c64ab 100644
--- a/Bindings/net/micrel.txt
+++ b/Bindings/net/micrel.txt
@@ -6,13 +6,32 @@ Optional properties:
 
  - micrel,led-mode : LED mode value to set for PHYs with configurable LEDs.
 
-              Configure the LED mode with single value. The list of PHYs and
-	      the bits that are currently supported:
+	Configure the LED mode with single value. The list of PHYs and the
+	bits that are currently supported:
 
-	      KSZ8001: register 0x1e, bits 15..14
-	      KSZ8041: register 0x1e, bits 15..14
-	      KSZ8021: register 0x1f, bits 5..4
-	      KSZ8031: register 0x1f, bits 5..4
-	      KSZ8051: register 0x1f, bits 5..4
+	KSZ8001: register 0x1e, bits 15..14
+	KSZ8041: register 0x1e, bits 15..14
+	KSZ8021: register 0x1f, bits 5..4
+	KSZ8031: register 0x1f, bits 5..4
+	KSZ8051: register 0x1f, bits 5..4
+	KSZ8081: register 0x1f, bits 5..4
+	KSZ8091: register 0x1f, bits 5..4
 
-              See the respective PHY datasheet for the mode values.
+	See the respective PHY datasheet for the mode values.
+
+ - micrel,rmii-reference-clock-select-25-mhz: RMII Reference Clock Select
+						bit selects 25 MHz mode
+
+	Setting the RMII Reference Clock Select bit enables 25 MHz rather
+	than 50 MHz clock mode.
+
+	Note that this option in only needed for certain PHY revisions with a
+	non-standard, inverted function of this configuration bit.
+	Specifically, a clock reference ("rmii-ref" below) is always needed to
+	actually select a mode.
+
+ - clocks, clock-names: contains clocks according to the common clock bindings.
+
+	supported clocks:
+	- KSZ8021, KSZ8031, KSZ8081, KSZ8091: "rmii-ref": The RMII reference
+	  input clock. Used to determine the XI input clock.
diff --git a/Bindings/net/nfc/st21nfca.txt b/Bindings/net/nfc/st21nfca.txt
index e4faa2e8dfeb..7bb2e213d6f9 100644
--- a/Bindings/net/nfc/st21nfca.txt
+++ b/Bindings/net/nfc/st21nfca.txt
@@ -1,7 +1,7 @@
 * STMicroelectronics SAS. ST21NFCA NFC Controller
 
 Required properties:
-- compatible: Should be "st,st21nfca_i2c".
+- compatible: Should be "st,st21nfca-i2c".
 - clock-frequency: I²C work frequency.
 - reg: address on the bus
 - interrupt-parent: phandle for the interrupt gpio controller
@@ -11,6 +11,10 @@ Required properties:
 Optional SoC Specific Properties:
 - pinctrl-names: Contains only one value - "default".
 - pintctrl-0: Specifies the pin control groups used for this controller.
+- ese-present: Specifies that an ese is physically connected to the nfc
+controller.
+- uicc-present: Specifies that the uicc swp signal can be physically
+connected to the nfc controller.
 
 Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
 
@@ -20,7 +24,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
 
 	st21nfca: st21nfca@1 {
 
-		compatible = "st,st21nfca_i2c";
+		compatible = "st,st21nfca-i2c";
 
 		reg = <0x01>;
 		clock-frequency = <400000>;
@@ -29,5 +33,8 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 
 		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+		ese-present;
+		uicc-present;
 	};
 };
diff --git a/Bindings/net/nfc/st21nfcb.txt b/Bindings/net/nfc/st21nfcb.txt
index 3b58ae480344..bb237072dbe9 100644
--- a/Bindings/net/nfc/st21nfcb.txt
+++ b/Bindings/net/nfc/st21nfcb.txt
@@ -1,7 +1,7 @@
 * STMicroelectronics SAS. ST21NFCB NFC Controller
 
 Required properties:
-- compatible: Should be "st,st21nfcb_i2c".
+- compatible: Should be "st,st21nfcb-i2c".
 - clock-frequency: I²C work frequency.
 - reg: address on the bus
 - interrupt-parent: phandle for the interrupt gpio controller
@@ -20,13 +20,13 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
 
 	st21nfcb: st21nfcb@8 {
 
-		compatible = "st,st21nfcb_i2c";
+		compatible = "st,st21nfcb-i2c";
 
 		reg = <0x08>;
 		clock-frequency = <400000>;
 
 		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 
 		reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
 	};
diff --git a/Bindings/net/nfc/trf7970a.txt b/Bindings/net/nfc/trf7970a.txt
index 1e436133685f..7c89ca290ced 100644
--- a/Bindings/net/nfc/trf7970a.txt
+++ b/Bindings/net/nfc/trf7970a.txt
@@ -13,6 +13,11 @@ Optional SoC Specific Properties:
 - pinctrl-names: Contains only one value - "default".
 - pintctrl-0: Specifies the pin control groups used for this controller.
 - autosuspend-delay: Specify autosuspend delay in milliseconds.
+- vin-voltage-override: Specify voltage of VIN pin in microvolts.
+- irq-status-read-quirk: Specify that the trf7970a being used has the
+  "IRQ Status Read" erratum.
+- en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF"
+  erratum.
 
 Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 
@@ -30,7 +35,10 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
 		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>,
 				  <&gpio2 5 GPIO_ACTIVE_LOW>;
 		vin-supply = <&ldo3_reg>;
+		vin-voltage-override = <5000000>;
 		autosuspend-delay = <30000>;
+		irq-status-read-quirk;
+		en2-rf-quirk;
 		status = "okay";
 	};
 };
diff --git a/Bindings/net/phy.txt b/Bindings/net/phy.txt
index 5b8c58903077..40831fbaff72 100644
--- a/Bindings/net/phy.txt
+++ b/Bindings/net/phy.txt
@@ -19,7 +19,6 @@ Optional Properties:
   specifications. If neither of these are specified, the default is to
   assume clause 22. The compatible list may also contain other
   elements.
-- max-speed: Maximum PHY supported speed (10, 100, 1000...)
 
   If the phy's identifier is known then the list may contain an entry
   of the form: "ethernet-phy-idAAAA.BBBB" where
@@ -29,6 +28,8 @@ Optional Properties:
             4 hex digits. This is the chip vendor OUI bits 19:24,
             followed by 10 bits of a vendor specific ID.
 
+- max-speed: Maximum PHY supported speed (10, 100, 1000...)
+
 Example:
 
 ethernet-phy@0 {
diff --git a/Bindings/net/qca-qca7000-spi.txt b/Bindings/net/qca-qca7000-spi.txt
new file mode 100644
index 000000000000..c74989c0d8ac
--- /dev/null
+++ b/Bindings/net/qca-qca7000-spi.txt
@@ -0,0 +1,47 @@
+* Qualcomm QCA7000 (Ethernet over SPI protocol)
+
+Note: The QCA7000 is useable as a SPI device. In this case it must be defined
+as a child of a SPI master in the device tree.
+
+Required properties:
+- compatible : Should be "qca,qca7000"
+- reg : Should specify the SPI chip select
+- interrupts : The first cell should specify the index of the source interrupt
+  and the second cell should specify the trigger type as rising edge
+- spi-cpha : Must be set
+- spi-cpol: Must be set
+
+Optional properties:
+- interrupt-parent : Specify the pHandle of the source interrupt
+- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at.
+  Numbers smaller than 1000000 or greater than 16000000 are invalid. Missing
+  the property will set the SPI frequency to 8000000 Hertz.
+- local-mac-address: 6 bytes, MAC address
+- qca,legacy-mode : Set the SPI data transfer of the QCA7000 to legacy mode.
+  In this mode the SPI master must toggle the chip select between each data
+  word. In burst mode these gaps aren't necessary, which is faster.
+  This setting depends on how the QCA7000 is setup via GPIO pin strapping.
+  If the property is missing the driver defaults to burst mode.
+
+Example:
+
+/* Freescale i.MX28 SPI master*/
+ssp2: spi@80014000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	qca7000: ethernet@0 {
+		compatible = "qca,qca7000";
+		reg = <0x0>;
+		interrupt-parent = <&gpio3>;      /* GPIO Bank 3 */
+		interrupts = <25 0x1>;            /* Index: 25, rising edge */
+		spi-cpha;                         /* SPI mode: CPHA=1 */
+		spi-cpol;                         /* SPI mode: CPOL=1 */
+		spi-max-frequency = <8000000>;    /* freq: 8 MHz */
+		local-mac-address = [ A0 B0 C0 D0 E0 F0 ];
+	};
+};
diff --git a/Bindings/net/rockchip-dwmac.txt b/Bindings/net/rockchip-dwmac.txt
new file mode 100644
index 000000000000..21fd199e89b5
--- /dev/null
+++ b/Bindings/net/rockchip-dwmac.txt
@@ -0,0 +1,68 @@
+Rockchip SoC RK3288 10/100/1000 Ethernet driver(GMAC)
+
+The device node has following properties.
+
+Required properties:
+ - compatible: Can be "rockchip,rk3288-gmac".
+ - reg: addresses and length of the register sets for the device.
+ - interrupts: Should contain the GMAC interrupts.
+ - interrupt-names: Should contain the interrupt names "macirq".
+ - rockchip,grf: phandle to the syscon grf used to control speed and mode.
+ - clocks: <&cru SCLK_MAC>: clock selector for main clock, from PLL or PHY.
+	   <&cru SCLK_MAC_PLL>: PLL clock for SCLK_MAC
+	   <&cru SCLK_MAC_RX>: clock gate for RX
+	   <&cru SCLK_MAC_TX>: clock gate for TX
+	   <&cru SCLK_MACREF>: clock gate for RMII referce clock
+	   <&cru SCLK_MACREF_OUT> clock gate for RMII reference clock output
+	   <&cru ACLK_GMAC>: AXI clock gate for GMAC
+	   <&cru PCLK_GMAC>: APB clock gate for GMAC
+ - clock-names: One name for each entry in the clocks property.
+ - phy-mode: See ethernet.txt file in the same directory.
+ - pinctrl-names: Names corresponding to the numbered pinctrl states.
+ - pinctrl-0: pin-control mode. can be <&rgmii_pins> or <&rmii_pins>.
+ - clock_in_out: For RGMII, it must be "input", means main clock(125MHz)
+   is not sourced from SoC's PLL, but input from PHY; For RMII, "input" means
+   PHY provides the reference clock(50MHz), "output" means GMAC provides the
+   reference clock.
+ - snps,reset-gpio       gpio number for phy reset.
+ - snps,reset-active-low boolean flag to indicate if phy reset is active low.
+ - assigned-clocks: main clock, should be <&cru SCLK_MAC>;
+ - assigned-clock-parents = parent of main clock.
+   can be <&ext_gmac> or <&cru SCLK_MAC_PLL>.
+
+Optional properties:
+ - tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
+ - rx_delay: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default.
+ - phy-supply: phandle to a regulator if the PHY needs one
+
+Example:
+
+gmac: ethernet@ff290000 {
+	compatible = "rockchip,rk3288-gmac";
+	reg = <0xff290000 0x10000>;
+	interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "macirq";
+	rockchip,grf = <&grf>;
+	clocks = <&cru SCLK_MAC>,
+		<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+		<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+		<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+	clock-names = "stmmaceth",
+		"mac_clk_rx", "mac_clk_tx",
+		"clk_mac_ref", "clk_mac_refout",
+		"aclk_mac", "pclk_mac";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins /*&rmii_pins*/>;
+
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+
+	status = "ok";
+};
diff --git a/Bindings/net/samsung-sxgbe.txt b/Bindings/net/samsung-sxgbe.txt
index 989f6c95cfd5..888c250197fe 100644
--- a/Bindings/net/samsung-sxgbe.txt
+++ b/Bindings/net/samsung-sxgbe.txt
@@ -17,7 +17,7 @@ Required properties:
 - samsung,pbl: Integer, Programmable Burst Length.
   Supported values are 1, 2, 4, 8, 16, or 32.
 - samsung,burst-map: Integer, Program the possible bursts supported by sxgbe
-  This is an interger and represents allowable DMA bursts when fixed burst.
+  This is an integer and represents allowable DMA bursts when fixed burst.
   Allowable range is 0x01-0x3F. When this field is set fixed burst is enabled.
   When fixed length is needed for burst mode, it can be set within allowable
   range.
diff --git a/Bindings/net/sh_eth.txt b/Bindings/net/sh_eth.txt
index 34d4db1a4e25..2f6ec85fda8e 100644
--- a/Bindings/net/sh_eth.txt
+++ b/Bindings/net/sh_eth.txt
@@ -9,6 +9,7 @@ Required properties:
 	      "renesas,ether-r8a7779"  if the device is a part of R8A7779 SoC.
 	      "renesas,ether-r8a7790"  if the device is a part of R8A7790 SoC.
 	      "renesas,ether-r8a7791"  if the device is a part of R8A7791 SoC.
+	      "renesas,ether-r8a7793"  if the device is a part of R8A7793 SoC.
 	      "renesas,ether-r8a7794"  if the device is a part of R8A7794 SoC.
 	      "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
 - reg: offset and length of (1) the E-DMAC/feLic register block (required),
diff --git a/Bindings/net/smsc-lan91c111.txt b/Bindings/net/smsc-lan91c111.txt
index 0f8487b88822..e77e167593db 100644
--- a/Bindings/net/smsc-lan91c111.txt
+++ b/Bindings/net/smsc-lan91c111.txt
@@ -11,3 +11,5 @@ Optional properties:
   are supported on the device.  Valid value for SMSC LAN91c111 are
   1, 2 or 4.  If it's omitted or invalid, the size would be 2 meaning
   16-bit access only.
+- power-gpios: GPIO to control the PWRDWN pin
+- reset-gpios: GPIO to control the RESET pin
diff --git a/Bindings/net/socfpga-dwmac.txt b/Bindings/net/socfpga-dwmac.txt
index 2a60cd3e8d5d..3a9d67951606 100644
--- a/Bindings/net/socfpga-dwmac.txt
+++ b/Bindings/net/socfpga-dwmac.txt
@@ -12,6 +12,10 @@ Required properties:
  - altr,sysmgr-syscon : Should be the phandle to the system manager node that
    encompasses the glue register, the register offset, and the register shift.
 
+Optional properties:
+altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
+		DWMAC controller is connected emac splitter.
+
 Example:
 
 gmac0: ethernet@ff700000 {
diff --git a/Bindings/net/sti-dwmac.txt b/Bindings/net/sti-dwmac.txt
index 3dd3d0bf112f..d05c1e1fd9b6 100644
--- a/Bindings/net/sti-dwmac.txt
+++ b/Bindings/net/sti-dwmac.txt
@@ -1,58 +1,61 @@
 STMicroelectronics SoC DWMAC glue layer controller
 
+This file documents differences between the core properties in
+Documentation/devicetree/bindings/net/stmmac.txt
+and what is needed on STi platforms to program the stmmac glue logic.
+
 The device node has following properties.
 
 Required properties:
- - compatible	: Can be "st,stih415-dwmac", "st,stih416-dwmac" or
-   "st,stid127-dwmac".
- - reg		: Offset of the glue configuration register map in system
-   configuration regmap pointed by st,syscon property and size.
-
- - reg-names	: Should be "sti-ethconf".
-
- - st,syscon	: Should be phandle to system configuration node which
-   encompases this glue registers.
-
- - st,tx-retime-src: On STi Parts for Giga bit speeds, 125Mhz clocks can be
-   wired up in from different sources. One via TXCLK pin and other via CLK_125
-   pin. This wiring is totally board dependent. However the retiming glue
-   logic should be configured accordingly. Possible values for this property
-
-	   "txclk" - if 125Mhz clock is wired up via txclk line.
-	   "clk_125" - if 125Mhz clock is wired up via clk_125 line.
-
-   This property is only valid for Giga bit setup( GMII, RGMII), and it is
-   un-used for non-giga bit (MII and RMII) setups. Also note that internal
-   clockgen can not generate stable 125Mhz clock.
-
- - st,ext-phyclk: This boolean property indicates who is generating the clock
-  for tx and rx. This property is only valid for RMII case where the clock can
-  be generated from the MAC or PHY.
-
- - clock-names: should be "sti-ethclk".
- - clocks: Should point to ethernet clockgen which can generate phyclk.
-
+ - compatible	: Can be "st,stih415-dwmac", "st,stih416-dwmac",
+   "st,stih407-dwmac", "st,stid127-dwmac".
+ - st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
+   encompases the glue register, and the offset of the control register.
+ - st,gmac_en: this is to enable the gmac into a dedicated sysctl control
+   register available on STiH407 SoC.
+ - pinctrl-0: pin-control for all the MII mode supported.
+
+Optional properties:
+ - resets : phandle pointing to the system reset controller with correct
+   reset line index for ethernet reset.
+ - st,ext-phyclk: valid only for RMII where PHY can generate 50MHz clock or
+   MAC can generate it.
+ - st,tx-retime-src: This specifies which clk is wired up to the mac for
+   retimeing tx lines. This is totally board dependent and can take one of the
+   posssible values from "txclk", "clk_125" or "clkgen".
+   If not passed, the internal clock will be used by default.
+ - sti-ethclk: this is the phy clock.
+ - sti-clkconf: this is an extra sysconfig register, available in new SoCs,
+   to program the clk retiming.
+ - st,gmac_en: to enable the GMAC, this only is present in some SoCs; e.g.
+   STiH407.
 
 Example:
 
-ethernet0: dwmac@fe810000 {
-	device_type 	= "network";
-	compatible	= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
-	reg 		= <0xfe810000 0x8000>, <0x8bc 0x4>;
-	reg-names	= "stmmaceth", "sti-ethconf";
-	interrupts	= <0 133 0>, <0 134 0>, <0 135 0>;
-	interrupt-names	= "macirq", "eth_wake_irq", "eth_lpi";
-	phy-mode	= "mii";
+ethernet0: dwmac@9630000 {
+	device_type = "network";
+	status = "disabled";
+	compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+	reg = <0x9630000 0x8000>;
+	reg-names = "stmmaceth";
 
-	st,syscon	= <&syscfg_rear>;
+	st,syscon = <&syscfg_sbc_reg 0x80>;
+	st,gmac_en;
+	resets = <&softreset STIH407_ETH1_SOFTRESET>;
+	reset-names = "stmmaceth";
 
-	snps,pbl 	= <32>;
+	interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
+		     <GIC_SPI 99 IRQ_TYPE_NONE>,
+		     <GIC_SPI 100 IRQ_TYPE_NONE>;
+	interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+	snps,pbl = <32>;
 	snps,mixed-burst;
 
-	resets		= <&softreset STIH416_ETH0_SOFTRESET>;
-	reset-names	= "stmmaceth";
-	pinctrl-0	= <&pinctrl_mii0>;
-	pinctrl-names 	= "default";
-	clocks		= <&CLK_S_GMAC0_PHY>;
-	clock-names	= "stmmaceth";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>;
+
+	clock-names = "stmmaceth", "sti-ethclk";
+	clocks = <&CLK_S_C0_FLEXGEN CLK_EXT2F_A9>,
+		 <&CLK_S_C0_FLEXGEN CLK_ETH_PHY>;
 };
diff --git a/Bindings/net/stmmac.txt b/Bindings/net/stmmac.txt
index 9b03c57563a4..8ca65cec52ae 100644
--- a/Bindings/net/stmmac.txt
+++ b/Bindings/net/stmmac.txt
@@ -39,6 +39,11 @@ Optional properties:
   further clocks may be specified in derived bindings.
 - clock-names: One name for each entry in the clocks property, the
   first one should be "stmmaceth".
+- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
+  available this clock is used for programming the Timestamp Addend Register.
+  If not passed then the system clock will be used and this is fine on some
+  platforms.
+- snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register.
 
 Examples:
 
@@ -54,5 +59,5 @@ Examples:
 		snps,multicast-filter-bins = <256>;
 		snps,perfect-filter-entries = <128>;
 		clocks = <&clock>;
-		clock-names = "stmmaceth">;
+		clock-names = "stmmaceth";
 	};
diff --git a/Bindings/net/wireless/qcom,ath10k.txt b/Bindings/net/wireless/qcom,ath10k.txt
new file mode 100644
index 000000000000..edefc26c6204
--- /dev/null
+++ b/Bindings/net/wireless/qcom,ath10k.txt
@@ -0,0 +1,30 @@
+* Qualcomm Atheros ath10k wireless devices
+
+For ath10k devices the calibration data can be provided through Device
+Tree. The node is a child node of the PCI controller.
+
+Required properties:
+-compatible : Should be "qcom,ath10k"
+
+Optional properties:
+- qcom,ath10k-calibration-data : calibration data as an array, the
+				 length can vary between hw versions
+
+
+Example:
+
+pci {
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+
+		ath10k@0,0 {
+			reg = <0 0 0 0 0>;
+			device_type = "pci";
+			qcom,ath10k-calibration-data = [ 01 02 03 ... ];
+		};
+	};
+};
diff --git a/Bindings/nios2/nios2.txt b/Bindings/nios2/nios2.txt
new file mode 100644
index 000000000000..d6d0a94cb3bb
--- /dev/null
+++ b/Bindings/nios2/nios2.txt
@@ -0,0 +1,62 @@
+* Nios II Processor Binding
+
+This binding specifies what properties available in the device tree
+representation of a Nios II Processor Core.
+
+Users can use sopc2dts tool for generating device tree sources (dts) from a
+Qsys system. See more detail in: http://www.alterawiki.com/wiki/Sopc2dts
+
+Required properties:
+
+- compatible: Compatible property value should be "altr,nios2-1.0".
+- reg: Contains CPU index.
+- interrupt-controller: Specifies that the node is an interrupt controller
+- #interrupt-cells: Specifies the number of cells needed to encode an
+		interrupt source, should be 1.
+- clock-frequency: Contains the clock frequency for CPU, in Hz.
+- dcache-line-size: Contains data cache line size.
+- icache-line-size: Contains instruction line size.
+- dcache-size: Contains data cache size.
+- icache-size: Contains instruction cache size.
+- altr,pid-num-bits: Specifies the number of bits to use to represent the process
+		identifier (PID).
+- altr,tlb-num-ways: Specifies the number of set-associativity ways in the TLB.
+- altr,tlb-num-entries: Specifies the number of entries in the TLB.
+- altr,tlb-ptr-sz: Specifies size of TLB pointer.
+- altr,has-mul: Specifies CPU hardware multipy support, should be 1.
+- altr,has-mmu: Specifies CPU support MMU support, should be 1.
+- altr,has-initda: Specifies CPU support initda instruction, should be 1.
+- altr,reset-addr: Specifies CPU reset address
+- altr,fast-tlb-miss-addr: Specifies CPU fast TLB miss exception address
+- altr,exception-addr: Specifies CPU exception address
+
+Optional properties:
+- altr,has-div: Specifies CPU hardware divide support
+- altr,implementation: Nios II core implementation, this should be "fast";
+
+Example:
+
+cpu@0x0 {
+	device_type = "cpu";
+	compatible = "altr,nios2-1.0";
+	reg = <0>;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+	clock-frequency = <125000000>;
+	dcache-line-size = <32>;
+	icache-line-size = <32>;
+	dcache-size = <32768>;
+	icache-size = <32768>;
+	altr,implementation = "fast";
+	altr,pid-num-bits = <8>;
+	altr,tlb-num-ways = <16>;
+	altr,tlb-num-entries = <128>;
+	altr,tlb-ptr-sz = <7>;
+	altr,has-div = <1>;
+	altr,has-mul = <1>;
+	altr,reset-addr = <0xc2800000>;
+	altr,fast-tlb-miss-addr = <0xc7fff400>;
+	altr,exception-addr = <0xd0000020>;
+	altr,has-initda = <1>;
+	altr,has-mmu = <1>;
+};
diff --git a/Bindings/nios2/timer.txt b/Bindings/nios2/timer.txt
new file mode 100644
index 000000000000..904a5846d7ac
--- /dev/null
+++ b/Bindings/nios2/timer.txt
@@ -0,0 +1,19 @@
+Altera Timer
+
+Required properties:
+
+- compatible : should be "altr,timer-1.0"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-parent: phandle of the interrupt controller
+- interrupts : Should contain the timer interrupt number
+- clock-frequency : The frequency of the clock that drives the counter, in Hz.
+
+Example:
+
+timer {
+	compatible = "altr,timer-1.0";
+	reg = <0x00400000 0x00000020>;
+	interrupt-parent = <&cpu>;
+	interrupts = <11>;
+	clock-frequency = <125000000>;
+};
diff --git a/Bindings/panel/auo,b101xtn01.txt b/Bindings/panel/auo,b101xtn01.txt
new file mode 100644
index 000000000000..889d511d66c9
--- /dev/null
+++ b/Bindings/panel/auo,b101xtn01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 10.1" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b101xtn01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/auo,b116xw03.txt b/Bindings/panel/auo,b116xw03.txt
new file mode 100644
index 000000000000..690d0a568ef3
--- /dev/null
+++ b/Bindings/panel/auo,b116xw03.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
+
+Required properties:
+- compatible: should be "auo,b116xw03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/avic,tm070ddh03.txt b/Bindings/panel/avic,tm070ddh03.txt
new file mode 100644
index 000000000000..b6f2f3e8f44e
--- /dev/null
+++ b/Bindings/panel/avic,tm070ddh03.txt
@@ -0,0 +1,7 @@
+Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
+
+Required properties:
+- compatible: should be "avic,tm070ddh03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/giantplus,gpg482739qs5.txt b/Bindings/panel/giantplus,gpg482739qs5.txt
new file mode 100644
index 000000000000..24b0b624434b
--- /dev/null
+++ b/Bindings/panel/giantplus,gpg482739qs5.txt
@@ -0,0 +1,7 @@
+GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "giantplus,gpg48273qs5"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/hannstar,hsd070pww1.txt b/Bindings/panel/hannstar,hsd070pww1.txt
new file mode 100644
index 000000000000..7da1d5c038ff
--- /dev/null
+++ b/Bindings/panel/hannstar,hsd070pww1.txt
@@ -0,0 +1,7 @@
+HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "hannstar,hsd070pww1"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/hit,tx23d38vm0caa.txt b/Bindings/panel/hit,tx23d38vm0caa.txt
new file mode 100644
index 000000000000..04caaae19af6
--- /dev/null
+++ b/Bindings/panel/hit,tx23d38vm0caa.txt
@@ -0,0 +1,7 @@
+Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
+
+Required properties:
+- compatible: should be "hit,tx23d38vm0caa"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/innolux,g121i1-l01.txt b/Bindings/panel/innolux,g121i1-l01.txt
new file mode 100644
index 000000000000..2743b07cd2f2
--- /dev/null
+++ b/Bindings/panel/innolux,g121i1-l01.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,g121i1-l01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Bindings/panel/sharp,lq101r1sx01.txt b/Bindings/panel/sharp,lq101r1sx01.txt
new file mode 100644
index 000000000000..f522bb8e47e1
--- /dev/null
+++ b/Bindings/panel/sharp,lq101r1sx01.txt
@@ -0,0 +1,49 @@
+Sharp Microelectronics 10.1" WQXGA TFT LCD panel
+
+This panel requires a dual-channel DSI host to operate. It supports two modes:
+- left-right: each channel drives the left or right half of the screen
+- even-odd: each channel drives the even or odd lines of the screen
+
+Each of the DSI channels controls a separate DSI peripheral. The peripheral
+driven by the first link (DSI-LINK1), left or even, is considered the primary
+peripheral and controls the device. The 'link2' property contains a phandle
+to the peripheral driven by the second link (DSI-LINK2, right or odd).
+
+Note that in video mode the DSI-LINK1 interface always provides the left/even
+pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
+is possible to program either link to drive the left/even or right/odd pixels
+but for the sake of consistency this binding assumes that the same assignment
+is chosen as for video mode.
+
+Required properties:
+- compatible: should be "sharp,lq101r1sx01"
+- reg: DSI virtual channel of the peripheral
+
+Required properties (for DSI-LINK1 only):
+- link2: phandle to the DSI peripheral on the secondary link. Note that the
+  presence of this property marks the containing node as DSI-LINK1.
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties (for DSI-LINK1 only):
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	dsi@54300000 {
+		panel: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+
+			link2 = <&secondary>;
+
+			power-supply = <...>;
+			backlight = <...>;
+		};
+	};
+
+	dsi@54400000 {
+		secondary: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+		};
+	};
diff --git a/Bindings/pci/designware-pcie.txt b/Bindings/pci/designware-pcie.txt
index ed0d9b9fff2b..9f4faa8e8d00 100644
--- a/Bindings/pci/designware-pcie.txt
+++ b/Bindings/pci/designware-pcie.txt
@@ -23,3 +23,6 @@ Required properties:
 
 Optional properties:
 - reset-gpio: gpio pin number of power good signal
+- bus-range: PCI bus numbers covered (it is recommended for new devicetrees to
+  specify this property, to keep backwards compatibility a range of 0x00-0xff
+  is assumed if not present)
diff --git a/Bindings/pci/fsl,imx6q-pcie.txt b/Bindings/pci/fsl,imx6q-pcie.txt
index 9455fd0ec830..6fbba53a309b 100644
--- a/Bindings/pci/fsl,imx6q-pcie.txt
+++ b/Bindings/pci/fsl,imx6q-pcie.txt
@@ -17,7 +17,9 @@ Example:
 
 	pcie@0x01000000 {
 		compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
-		reg = <0x01ffc000 0x4000>;
+		reg = <0x01ffc000 0x04000>,
+		      <0x01f00000 0x80000>;
+		reg-names = "dbi", "config";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		device_type = "pci";
diff --git a/Bindings/pci/fsl,pci.txt b/Bindings/pci/fsl,pci.txt
new file mode 100644
index 000000000000..d8ac4a768e7e
--- /dev/null
+++ b/Bindings/pci/fsl,pci.txt
@@ -0,0 +1,27 @@
+* Bus Enumeration by Freescale PCI-X Agent
+
+Typically any Freescale PCI-X bridge hardware strapped into Agent mode
+is prevented from enumerating the bus. The PrPMC form-factor requires
+all mezzanines to be PCI-X Agents, but one per system may still
+enumerate the bus.
+
+The property defined below will allow a PCI-X bridge to be used for bus
+enumeration despite being strapped into Agent mode.
+
+Required properties:
+- fsl,pci-agent-force-enum : There is no value associated with this
+  property. The property itself is treated as a boolean.
+
+Example:
+
+	/* PCI-X bridge known to be PrPMC Monarch */
+	pci0: pci@ef008000 {
+		fsl,pci-agent-force-enum;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		...
+		...
+	};
diff --git a/Bindings/pci/host-generic-pci.txt b/Bindings/pci/host-generic-pci.txt
index f0b0436807b4..cf3e205e0b7e 100644
--- a/Bindings/pci/host-generic-pci.txt
+++ b/Bindings/pci/host-generic-pci.txt
@@ -55,7 +55,7 @@ For CAM, this 24-bit offset is:
         cfg_offset(bus, device, function, register) =
                    bus << 16 | device << 11 | function << 8 | register
 
-Whilst ECAM extends this by 4 bits to accomodate 4k of function space:
+Whilst ECAM extends this by 4 bits to accommodate 4k of function space:
 
         cfg_offset(bus, device, function, register) =
                    bus << 20 | device << 15 | function << 12 | register
diff --git a/Bindings/pci/layerscape-pci.txt b/Bindings/pci/layerscape-pci.txt
new file mode 100644
index 000000000000..6286f049bf18
--- /dev/null
+++ b/Bindings/pci/layerscape-pci.txt
@@ -0,0 +1,42 @@
+Freescale Layerscape PCIe controller
+
+This PCIe host controller is based on the Synopsis Designware PCIe IP
+and thus inherits all the common properties defined in designware-pcie.txt.
+
+Required properties:
+- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie"
+- reg: base addresses and lengths of the PCIe controller
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+  entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+  "intr": The interrupt that is asserted for controller interrupts
+- fsl,pcie-scfg: Must include two entries.
+  The first entry must be a link to the SCFG device node
+  The second entry must be '0' or '1' based on physical PCIe controller index.
+  This is used to get SCFG PEXN registers
+
+Example:
+
+	pcie@3400000 {
+		compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
+		reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
+		       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+		reg-names = "regs", "config";
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+		interrupt-names = "intr";
+		fsl,pcie-scfg = <&scfg 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		num-lanes = <4>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+			  0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000   /* prefetchable memory */
+			  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+	};
diff --git a/Bindings/pci/nvidia,tegra20-pcie.txt b/Bindings/pci/nvidia,tegra20-pcie.txt
index 0823362548dc..75321ae23c08 100644
--- a/Bindings/pci/nvidia,tegra20-pcie.txt
+++ b/Bindings/pci/nvidia,tegra20-pcie.txt
@@ -1,7 +1,10 @@
 NVIDIA Tegra PCIe controller
 
 Required properties:
-- compatible: "nvidia,tegra20-pcie" or "nvidia,tegra30-pcie"
+- compatible: For Tegra20, must contain "nvidia,tegra20-pcie".  For Tegra30,
+  "nvidia,tegra30-pcie".  For Tegra124, must contain "nvidia,tegra124-pcie".
+  Otherwise, must contain "nvidia,<chip>-pcie", plus one of the above, where
+  <chip> is tegra132 or tegra210.
 - device_type: Must be "pci"
 - reg: A list of physical base address and length for each set of controller
   registers. Must contain an entry for each entry in the reg-names property.
@@ -57,6 +60,11 @@ Required properties:
   - afi
   - pcie_x
 
+Required properties on Tegra124 and later:
+- phys: Must contain an entry for each entry in phy-names.
+- phy-names: Must include the following entries:
+  - pcie
+
 Power supplies for Tegra20:
 - avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
 - vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
@@ -84,6 +92,21 @@ Power supplies for Tegra30:
     - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
     - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
 
+Power supplies for Tegra124:
+- Required:
+  - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+  - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+  - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+    supply 1.05 V.
+  - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+    Must supply 3.3 V.
+  - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3).
+    Must supply 3.3 V.
+  - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+    supply 2.8-3.3 V.
+  - avdd-pll-erefe-supply: Power supply for PLLE (shared with USB3). Must
+    supply 1.05 V.
+
 Root ports are defined as subnodes of the PCIe controller node.
 
 Required properties:
diff --git a/Bindings/pci/pci-keystone.txt b/Bindings/pci/pci-keystone.txt
new file mode 100644
index 000000000000..54eae2938174
--- /dev/null
+++ b/Bindings/pci/pci-keystone.txt
@@ -0,0 +1,63 @@
+TI Keystone PCIe interface
+
+Keystone PCI host Controller is based on Designware PCI h/w version 3.65.
+It shares common functions with PCIe Designware core driver and inherit
+common properties defined in
+Documentation/devicetree/bindings/pci/designware-pci.txt
+
+Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt
+for the details of Designware DT bindings.  Additional properties are
+described here as well as properties that are not applicable.
+
+Required Properties:-
+
+compatibility: "ti,keystone-pcie"
+reg:	index 1 is the base address and length of DW application registers.
+	index 2 is the base address and length of PCI device ID register.
+
+pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
+	interrupt-cells: should be set to 1
+	interrupt-parent: Parent interrupt controller phandle
+	interrupts: GIC interrupt lines connected to PCI MSI interrupt lines
+
+ Example:
+	pcie_msi_intc: msi-interrupt-controller {
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
+	};
+
+pcie_intc: Interrupt controller device node for Legacy IRQ chip
+	interrupt-cells: should be set to 1
+	interrupt-parent: Parent interrupt controller phandle
+	interrupts: GIC interrupt lines connected to PCI Legacy interrupt lines
+
+ Example:
+	pcie_intc: legacy-interrupt-controller {
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
+			<GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
+			<GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
+			<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+	};
+
+Optional properties:-
+	phys: phandle to Generic Keystone SerDes phy for PCI
+	phy-names: name of the Generic Keystine SerDes phy for PCI
+	  - If boot loader already does PCI link establishment, then phys and
+	    phy-names shouldn't be present.
+
+Designware DT Properties not applicable for Keystone PCI
+
+1. pcie_bus clock-names not used.  Instead, a phandle to phys is used.
+
diff --git a/Bindings/pci/pci.txt b/Bindings/pci/pci.txt
index 41aeed38926d..f8fbe9af7b2f 100644
--- a/Bindings/pci/pci.txt
+++ b/Bindings/pci/pci.txt
@@ -7,3 +7,14 @@ And for the interrupt mapping part:
 
 Open Firmware Recommended Practice: Interrupt Mapping
 http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf
+
+Additionally to the properties specified in the above standards a host bridge
+driver implementation may support the following properties:
+
+- linux,pci-domain:
+   If present this property assigns a fixed PCI domain number to a host bridge,
+   otherwise an unstable (across boots) unique number will be assigned.
+   It is required to either not set this property at all or set it for all
+   host bridges in the system, otherwise potentially conflicting domain numbers
+   may be assigned to root buses behind different host bridges.  The domain
+   number for each host bridge in the system must be unique.
diff --git a/Bindings/pci/versatile.txt b/Bindings/pci/versatile.txt
new file mode 100644
index 000000000000..ebd1e7d0403e
--- /dev/null
+++ b/Bindings/pci/versatile.txt
@@ -0,0 +1,59 @@
+* ARM Versatile Platform Baseboard PCI interface
+
+PCI host controller found on the ARM Versatile PB board's FPGA.
+
+Required properties:
+- compatible: should contain "arm,versatile-pci" to identify the Versatile PCI
+  controller.
+- reg: base addresses and lengths of the pci controller. There must be 3
+  entries:
+	- Versatile-specific registers
+	- Self Config space
+	- Config space
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- device_type: set to "pci"
+- bus-range: set to <0 0xff>
+- ranges: ranges for the PCI memory and I/O regions
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties to define
+	the mapping of the PCI interface to interrupt numbers.
+
+Example:
+
+pci-controller@10001000 {
+	compatible = "arm,versatile-pci";
+	device_type = "pci";
+	reg = <0x10001000 0x1000
+	       0x41000000 0x10000
+	       0x42000000 0x100000>;
+	bus-range = <0 0xff>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+	#interrupt-cells = <1>;
+
+	ranges = <0x01000000 0 0x00000000 0x43000000 0 0x00010000   /* downstream I/O */
+		  0x02000000 0 0x50000000 0x50000000 0 0x10000000   /* non-prefetchable memory */
+		  0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
+
+	interrupt-map-mask = <0x1800 0 0 7>;
+	interrupt-map = <0x1800 0 0 1 &sic 28
+			 0x1800 0 0 2 &sic 29
+			 0x1800 0 0 3 &sic 30
+			 0x1800 0 0 4 &sic 27
+
+			 0x1000 0 0 1 &sic 27
+			 0x1000 0 0 2 &sic 28
+			 0x1000 0 0 3 &sic 29
+			 0x1000 0 0 4 &sic 30
+
+			 0x0800 0 0 1 &sic 30
+			 0x0800 0 0 2 &sic 27
+			 0x0800 0 0 3 &sic 28
+			 0x0800 0 0 4 &sic 29
+
+			 0x0000 0 0 1 &sic 29
+			 0x0000 0 0 2 &sic 30
+			 0x0000 0 0 3 &sic 27
+			 0x0000 0 0 4 &sic 28>;
+};
diff --git a/Bindings/pci/xgene-pci.txt b/Bindings/pci/xgene-pci.txt
new file mode 100644
index 000000000000..1070b068c7c6
--- /dev/null
+++ b/Bindings/pci/xgene-pci.txt
@@ -0,0 +1,57 @@
+* AppliedMicro X-Gene PCIe interface
+
+Required properties:
+- device_type: set to "pci"
+- compatible: should contain "apm,xgene-pcie" to identify the core.
+- reg: A list of physical base address and length for each set of controller
+       registers. Must contain an entry for each entry in the reg-names
+       property.
+- reg-names: Must include the following entries:
+  "csr": controller configuration registers.
+  "cfg": pcie configuration space registers.
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- ranges: ranges for the outbound memory, I/O regions.
+- dma-ranges: ranges for the inbound memory regions.
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties
+	to define the mapping of the PCIe interface to interrupt
+	numbers.
+- clocks: from common clock binding: handle to pci clock.
+
+Optional properties:
+- status: Either "ok" or "disabled".
+- dma-coherent: Present if dma operations are coherent
+
+Example:
+
+SoC specific DT Entry:
+
+	pcie0: pcie@1f2b0000 {
+		status = "disabled";
+		device_type = "pci";
+		compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+			0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+		reg-names = "csr", "cfg";
+		ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000   /* io */
+			  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+		dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+			      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+				 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+				 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+				 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+		dma-coherent;
+		clocks = <&pcie0clk 0>;
+	};
+
+
+Board specific DT Entry:
+	&pcie0 {
+		status = "ok";
+	};
diff --git a/Bindings/pci/xilinx-pcie.txt b/Bindings/pci/xilinx-pcie.txt
new file mode 100644
index 000000000000..3e2c88d97ad4
--- /dev/null
+++ b/Bindings/pci/xilinx-pcie.txt
@@ -0,0 +1,62 @@
+* Xilinx AXI PCIe Root Port Bridge DT description
+
+Required properties:
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
+- reg: Should contain AXI PCIe registers location and length
+- device_type: must be "pci"
+- interrupts: Should contain AXI PCIe interrupt
+- interrupt-map-mask,
+  interrupt-map: standard PCI properties to define the mapping of the
+	PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+	supported by hardware)
+	Please refer to the standard PCI bus binding document for a more
+	detailed explanation
+
+Optional properties:
+- bus-range: PCI bus numbers covered
+
+Interrupt controller child node
++++++++++++++++++++++++++++++++
+Required properties:
+- interrupt-controller: identifies the node as an interrupt controller
+- #address-cells: specifies the number of cells needed to encode an
+	address. The value must be 0.
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+
+NOTE:
+The core provides a single interrupt for both INTx/MSI messages. So,
+created a interrupt controller node to support 'interrupt-map' DT
+functionality.  The driver will create an IRQ domain for this map, decode
+the four INTx interrupts in ISR and route them to this domain.
+
+
+Example:
+++++++++
+
+	pci_express: axi-pcie@50000000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		compatible = "xlnx,axi-pcie-host-1.00.a";
+		reg = < 0x50000000 0x10000000 >;
+		device_type = "pci";
+		interrupts = < 0 52 4 >;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
+
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		}
+	};
diff --git a/Bindings/phy/berlin-sata-phy.txt b/Bindings/phy/berlin-sata-phy.txt
index 88f8c23384c0..c0155f842f62 100644
--- a/Bindings/phy/berlin-sata-phy.txt
+++ b/Bindings/phy/berlin-sata-phy.txt
@@ -2,7 +2,9 @@ Berlin SATA PHY
 ---------------
 
 Required properties:
-- compatible: should be "marvell,berlin2q-sata-phy"
+- compatible: should be one of
+    "marvell,berlin2-sata-phy"
+    "marvell,berlin2q-sata-phy"
 - address-cells: should be 1
 - size-cells: should be 0
 - phy-cells: from the generic PHY bindings, must be 1
diff --git a/Bindings/phy/berlin-usb-phy.txt b/Bindings/phy/berlin-usb-phy.txt
new file mode 100644
index 000000000000..be33780f668e
--- /dev/null
+++ b/Bindings/phy/berlin-usb-phy.txt
@@ -0,0 +1,16 @@
+* Marvell Berlin USB PHY
+
+Required properties:
+- compatible: "marvell,berlin2-usb-phy" or "marvell,berlin2cd-usb-phy"
+- reg: base address and length of the registers
+- #phys-cells: should be 0
+- resets: reference to the reset controller
+
+Example:
+
+	usb-phy@f774000 {
+		compatible = "marvell,berlin2-usb-phy";
+		reg = <0xf774000 0x128>;
+		#phy-cells = <0>;
+		resets = <&chip 0x104 14>;
+	};
diff --git a/Bindings/phy/phy-bindings.txt b/Bindings/phy/phy-bindings.txt
index 2aa1840200ed..1293c321754c 100644
--- a/Bindings/phy/phy-bindings.txt
+++ b/Bindings/phy/phy-bindings.txt
@@ -27,7 +27,7 @@ phys: phy {
 };
 
 That node describes an IP block (PHY provider) that implements 2 different PHYs.
-In order to differentiate between these 2 PHYs, an additonal specifier should be
+In order to differentiate between these 2 PHYs, an additional specifier should be
 given while trying to get a reference to it.
 
 PHY user node
diff --git a/Bindings/phy/phy-miphy28lp.txt b/Bindings/phy/phy-miphy28lp.txt
new file mode 100644
index 000000000000..89caa885d08c
--- /dev/null
+++ b/Bindings/phy/phy-miphy28lp.txt
@@ -0,0 +1,117 @@
+STMicroelectronics STi MIPHY28LP PHY binding
+============================================
+
+This binding describes a miphy device that is used to control PHY hardware
+for SATA, PCIe or USB3.
+
+Required properties (controller (parent) node):
+- compatible	: Should be "st,miphy28lp-phy".
+- st,syscfg	: Should be a phandle of the system configuration register group
+		  which contain the SATA, PCIe or USB3 mode setting bits.
+
+Required nodes	:  A sub-node is required for each channel the controller
+		   provides. Address range information including the usual
+		   'reg' and 'reg-names' properties are used inside these
+		   nodes to describe the controller's topology. These nodes
+		   are translated by the driver's .xlate() function.
+
+Required properties (port (child) node):
+- #phy-cells	: Should be 1 (See second example)
+		  Cell after port phandle is device type from:
+			- PHY_TYPE_SATA
+			- PHY_TYPE_PCI
+			- PHY_TYPE_USB3
+- reg		: Address and length of the register set for the device.
+- reg-names	: The names of the register addresses corresponding to the registers
+		  filled in "reg". It can also contain the offset of the system configuration
+		  registers used as glue-logic to setup the device for SATA/PCIe or USB3
+		  devices.
+- st,syscfg	: Offset of the parent configuration register.
+- resets	: phandle to the parent reset controller.
+- reset-names	: Associated name must be "miphy-sw-rst".
+
+Optional properties (port (child) node):
+- st,osc-rdy		: to check the MIPHY0_OSC_RDY status in the glue-logic. This
+			  is not available in all the MiPHY. For example, for STiH407, only the
+			  MiPHY0 has this bit.
+- st,osc-force-ext	: to select the external oscillator. This can change from
+			  different MiPHY inside the same SoC.
+- st,sata_gen		: to select which SATA_SPDMODE has to be set in the SATA system config
+			  register.
+- st,px_rx_pol_inv	: to invert polarity of RXn/RXp (respectively negative line and positive
+			  line).
+- st,scc-on		: enable ssc to reduce effects of EMI (only for sata or PCIe).
+- st,tx-impedance-comp	: to compensate tx impedance avoiding out of range values.
+
+example:
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+			compatible = "st,miphy28lp-phy";
+			st,syscfg = <&syscfg_core>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+
+			phy_port0: port@9b22000 {
+				reg = <0x9b22000 0xff>,
+				      <0x9b09000 0xff>,
+				      <0x9b04000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x114 0x818 0xe0 0xec>;
+				#phy-cells = <1>;
+				st,osc-rdy;
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
+			};
+
+			phy_port1: port@9b2a000 {
+				reg = <0x9b2a000 0xff>,
+				      <0x9b19000 0xff>,
+				      <0x9b14000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+				#phy-cells = <1>;
+				st,osc-force-ext;
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
+			};
+
+			phy_port2: port@8f95000 {
+				reg = <0x8f95000 0xff>,
+				      <0x8f90000 0xff>;
+				reg-names = "pipew",
+					    "usb3-up";
+
+				st,syscfg = <0x11c 0x820>;
+
+				#phy-cells = <1>;
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
+			};
+		};
+
+
+Specifying phy control of devices
+=================================
+
+Device nodes should specify the configuration required in their "phys"
+property, containing a phandle to the miphy device node and an index
+specifying which configuration to use, as described in phy-bindings.txt.
+
+example:
+		sata0: sata@9b20000  {
+			...
+			phys		= <&phy_port0 PHY_TYPE_SATA>;
+			...
+		};
+
+Macro definitions for the supported miphy configuration can be found in:
+
+include/dt-bindings/phy/phy.h
diff --git a/Bindings/phy/phy-miphy365x.txt b/Bindings/phy/phy-miphy365x.txt
index 42c880886cf7..9802d5d911aa 100644
--- a/Bindings/phy/phy-miphy365x.txt
+++ b/Bindings/phy/phy-miphy365x.txt
@@ -6,8 +6,10 @@ for SATA and PCIe.
 
 Required properties (controller (parent) node):
 - compatible    : Should be "st,miphy365x-phy"
-- st,syscfg     : Should be a phandle of the system configuration register group
-		  which contain the SATA, PCIe mode setting bits
+- st,syscfg     : Phandle / integer array property. Phandle of sysconfig group
+		  containing the miphy registers and integer array should contain
+		  an entry for each port sub-node, specifying the control
+		  register offset inside the sysconfig group.
 
 Required nodes	:  A sub-node is required for each channel the controller
 		   provides. Address range information including the usual
@@ -26,7 +28,6 @@ Required properties (port (child) node):
 		  registers filled in "reg":
 			- sata:   For SATA devices
 			- pcie:   For PCIe devices
-			- syscfg: To specify the syscfg based config register
 
 Optional properties (port (child) node):
 - st,sata-gen	     :	Generation of locally attached SATA IP. Expected values
@@ -39,20 +40,20 @@ Example:
 
 	miphy365x_phy: miphy365x@fe382000 {
 		compatible      = "st,miphy365x-phy";
-		st,syscfg  	= <&syscfg_rear>;
+		st,syscfg  	= <&syscfg_rear 0x824 0x828>;
 		#address-cells	= <1>;
 		#size-cells	= <1>;
 		ranges;
 
 		phy_port0: port@fe382000 {
-			reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
-			reg-names = "sata", "pcie", "syscfg";
+			reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
+			reg-names = "sata", "pcie";
 			#phy-cells = <1>;
 			st,sata-gen = <3>;
 		};
 
 		phy_port1: port@fe38a000 {
-			reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;;
+			reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;;
 			reg-names = "sata", "pcie", "syscfg";
 			#phy-cells = <1>;
 			st,pcie-tx-pol-inv;
diff --git a/Bindings/phy/phy-mvebu.txt b/Bindings/phy/phy-mvebu.txt
new file mode 100644
index 000000000000..f95b6260a3b3
--- /dev/null
+++ b/Bindings/phy/phy-mvebu.txt
@@ -0,0 +1,43 @@
+* Marvell MVEBU SATA PHY
+
+Power control for the SATA phy found on Marvell MVEBU SoCs.
+
+This document extends the binding described in phy-bindings.txt
+
+Required properties :
+
+ - reg		   : Offset and length of the register set for the SATA device
+ - compatible	   : Should be "marvell,mvebu-sata-phy"
+ - clocks	   : phandle of clock and specifier that supplies the device
+ - clock-names	   : Should be "sata"
+
+Example:
+		sata-phy@84000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x84000 0x0334>;
+			clocks = <&gate_clk 15>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+			status = "ok";
+		};
+
+Armada 375 USB cluster
+----------------------
+
+Armada 375 comes with an USB2 host and device controller and an USB3
+controller. The USB cluster control register allows to manage common
+features of both USB controllers.
+
+Required properties:
+
+- compatible: "marvell,armada-375-usb-cluster"
+- reg: Should contain usb cluster register location and length.
+- #phy-cells : from the generic phy bindings, must be 1. Possible
+values are 1 (USB2), 2 (USB3).
+
+Example:
+		usbcluster: usb-cluster@18400 {
+			compatible = "marvell,armada-375-usb-cluster";
+			reg = <0x18400 0x4>;
+			#phy-cells = <1>
+		};
diff --git a/Bindings/phy/phy-stih407-usb.txt b/Bindings/phy/phy-stih407-usb.txt
new file mode 100644
index 000000000000..de6a706abcdb
--- /dev/null
+++ b/Bindings/phy/phy-stih407-usb.txt
@@ -0,0 +1,24 @@
+ST STiH407 USB PHY controller
+
+This file documents the dt bindings for the usb picoPHY driver which is the PHY for both USB2 and USB3
+host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC family from STMicroelectronics.
+
+Required properties:
+- compatible		: should be "st,stih407-usb2-phy"
+- st,syscfg		: phandle of sysconfig bank plus integer array containing phyparam and phyctrl register offsets
+- resets		: list of phandle and reset specifier pairs. There should be two entries, one
+			  for the whole phy and one for the port
+- reset-names		: list of reset signal names. Should be "global" and "port"
+See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+Example:
+
+usb2_picophy0: usbpicophy@f8 {
+	compatible	= "st,stih407-usb2-phy";
+	#phy-cells	= <0>;
+	st,syscfg	= <&syscfg_core 0x100 0xf4>;
+	resets		= <&softreset STIH407_PICOPHY_SOFTRESET>,
+			  <&picophyreset STIH407_PICOPHY0_RESET>;
+	reset-names	= "global", "port";
+};
diff --git a/Bindings/phy/phy-stih41x-usb.txt b/Bindings/phy/phy-stih41x-usb.txt
new file mode 100644
index 000000000000..00944a05ee6b
--- /dev/null
+++ b/Bindings/phy/phy-stih41x-usb.txt
@@ -0,0 +1,24 @@
+STMicroelectronics STiH41x USB PHY binding
+------------------------------------------
+
+This file contains documentation for the usb phy found in STiH415/6 SoCs from
+STMicroelectronics.
+
+Required properties:
+- compatible	: should be "st,stih416-usb-phy" or "st,stih415-usb-phy"
+- st,syscfg	: should be a phandle of the syscfg node
+- clock-names	: must contain "osc_phy"
+- clocks	: must contain an entry for each name in clock-names.
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- #phy-cells	: must be 0 for this phy
+See: Documentation/devicetree/bindings/phy/phy-bindings.txt
+
+Example:
+
+usb2_phy: usb2phy@0 {
+	compatible	= "st,stih416-usb-phy";
+	#phy-cell	= <0>;
+	st,syscfg	= <&syscfg_rear>;
+	clocks		= <&clk_sysin>;
+	clock-names	= "osc_phy";
+};
diff --git a/Bindings/phy/qcom-dwc3-usb-phy.txt b/Bindings/phy/qcom-dwc3-usb-phy.txt
new file mode 100644
index 000000000000..86f2dbe07ed4
--- /dev/null
+++ b/Bindings/phy/qcom-dwc3-usb-phy.txt
@@ -0,0 +1,39 @@
+Qualcomm DWC3 HS AND SS PHY CONTROLLER
+--------------------------------------
+
+DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
+controllers.  Each DWC3 PHY controller should have its own node.
+
+Required properties:
+- compatible: should contain one of the following:
+	- "qcom,dwc3-hs-usb-phy" for High Speed Synopsis PHY controller
+	- "qcom,dwc3-ss-usb-phy" for Super Speed Synopsis PHY controller
+- reg: offset and length of the DWC3 PHY controller register set
+- #phy-cells: must be zero
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+  clock-names.
+- clock-names: Should contain "ref" for the PHY reference clock
+
+Optional clocks:
+  "xo"		External reference clock
+
+Example:
+		phy@100f8800 {
+			compatible = "qcom,dwc3-hs-usb-phy";
+			reg = <0x100f8800 0x30>;
+			clocks = <&gcc USB30_0_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "ok";
+		};
+
+		phy@100f8830 {
+			compatible = "qcom,dwc3-ss-usb-phy";
+			reg = <0x100f8830 0x30>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "ok";
+		};
diff --git a/Bindings/phy/rcar-gen2-phy.txt b/Bindings/phy/rcar-gen2-phy.txt
new file mode 100644
index 000000000000..00fc52a034b7
--- /dev/null
+++ b/Bindings/phy/rcar-gen2-phy.txt
@@ -0,0 +1,51 @@
+* Renesas R-Car generation 2 USB PHY
+
+This file provides information on what the device node for the R-Car generation
+2 USB PHY contains.
+
+Required properties:
+- compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
+	      "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
+- reg: offset and length of the register block.
+- #address-cells: number of address cells for the USB channel subnodes, must
+		  be <1>.
+- #size-cells: number of size cells for the USB channel subnodes, must be <0>.
+- clocks: clock phandle and specifier pair.
+- clock-names: string, clock input name, must be "usbhs".
+
+The USB PHY device tree node should have the subnodes corresponding to the USB
+channels. These subnodes must contain the following properties:
+- reg: the USB controller selector; see the table below for the values.
+- #phy-cells: see phy-bindings.txt in the same directory, must be <1>.
+
+The phandle's argument in the PHY specifier is the USB controller selector for
+the USB channel; see the selector meanings below:
+
++-----------+---------------+---------------+
+|\ Selector |               |               |
++ --------- +       0       |       1       |
+| Channel  \|               |               |
++-----------+---------------+---------------+
+| 0         | PCI EHCI/OHCI | HS-USB        |
+| 2         | PCI EHCI/OHCI | xHCI          |
++-----------+---------------+---------------+
+
+Example (Lager board):
+
+	usb-phy@e6590100 {
+		compatible = "renesas,usb-phy-r8a7790";
+		reg = <0 0xe6590100 0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+		clock-names = "usbhs";
+
+		usb-channel@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+		usb-channel@2 {
+			reg = <2>;
+			#phy-cells = <1>;
+		};
+	};
diff --git a/Bindings/phy/rockchip-usb-phy.txt b/Bindings/phy/rockchip-usb-phy.txt
new file mode 100644
index 000000000000..826454ac43bb
--- /dev/null
+++ b/Bindings/phy/rockchip-usb-phy.txt
@@ -0,0 +1,37 @@
+ROCKCHIP USB2 PHY
+
+Required properties:
+ - compatible: rockchip,rk3288-usb-phy
+ - rockchip,grf : phandle to the syscon managing the "general
+   register files"
+ - #address-cells: should be 1
+ - #size-cells: should be 0
+
+Sub-nodes:
+Each PHY should be represented as a sub-node.
+
+Sub-nodes
+required properties:
+- #phy-cells: should be 0
+- reg: PHY configure reg address offset in GRF
+		"0x320" - for PHY attach to OTG controller
+		"0x334" - for PHY attach to HOST0 controller
+		"0x348" - for PHY attach to HOST1 controller
+
+Optional Properties:
+- clocks : phandle + clock specifier for the phy clocks
+- clock-names: string, clock name, must be "phyclk"
+
+Example:
+
+usbphy: phy {
+	compatible = "rockchip,rk3288-usb-phy";
+	rockchip,grf = <&grf>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usbphy0: usb-phy0 {
+		#phy-cells = <0>;
+		reg = <0x320>;
+	};
+};
diff --git a/Bindings/phy/samsung-phy.txt b/Bindings/phy/samsung-phy.txt
index 7a6feea2a48b..91e38cfe1f8f 100644
--- a/Bindings/phy/samsung-phy.txt
+++ b/Bindings/phy/samsung-phy.txt
@@ -3,8 +3,8 @@ Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY
 
 Required properties:
 - compatible : should be "samsung,s5pv210-mipi-video-phy";
-- reg : offset and length of the MIPI DPHY register set;
 - #phy-cells : from the generic phy bindings, must be 1;
+- syscon - phandle to the PMU system controller;
 
 For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in
 the PHY specifier identifies the PHY and its meaning is as follows:
@@ -17,8 +17,11 @@ Samsung EXYNOS SoC series Display Port PHY
 -------------------------------------------------
 
 Required properties:
-- compatible : should be "samsung,exynos5250-dp-video-phy";
-- reg : offset and length of the Display Port PHY register set;
+- compatible : should be one of the following supported values:
+	 - "samsung,exynos5250-dp-video-phy"
+	 - "samsung,exynos5420-dp-video-phy"
+- samsung,pmu-syscon: phandle for PMU system controller interface, used to
+		      control pmu registers for power isolation.
 - #phy-cells : from the generic PHY bindings, must be 0;
 
 Samsung S5P/EXYNOS SoC series USB PHY
@@ -125,6 +128,7 @@ Required properties:
 - compatible : Should be set to one of the following supported values:
 	- "samsung,exynos5250-usbdrd-phy" - for exynos5250 SoC,
 	- "samsung,exynos5420-usbdrd-phy" - for exynos5420 SoC.
+	- "samsung,exynos7-usbdrd-phy" - for exynos7 SoC.
 - reg : Register offset and length of USB DRD PHY register set;
 - clocks: Clock IDs array as required by the controller
 - clock-names: names of clocks correseponding to IDs in the clock property;
@@ -135,6 +139,11 @@ Required properties:
 	       PHY operations, associated by phy name. It is used to
 	       determine bit values for clock settings register.
 	       For Exynos5420 this is given as 'sclk_usbphy30' in CMU.
+	- optional clocks: Exynos7 SoC has now following additional
+			   gate clocks available:
+			   - phy_pipe: for PIPE3 phy
+			   - phy_utmi: for UTMI+ phy
+			   - itp: for ITP generation
 - samsung,pmu-syscon: phandle for PMU system controller interface, used to
 		      control pmu registers for power isolation.
 - #phy-cells : from the generic PHY bindings, must be 1;
diff --git a/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 93ce12eb422a..fdd8046e650a 100644
--- a/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -11,6 +11,7 @@ Required properties:
   "allwinner,sun5i-a10s-pinctrl"
   "allwinner,sun5i-a13-pinctrl"
   "allwinner,sun6i-a31-pinctrl"
+  "allwinner,sun6i-a31s-pinctrl"
   "allwinner,sun6i-a31-r-pinctrl"
   "allwinner,sun7i-a20-pinctrl"
   "allwinner,sun8i-a23-pinctrl"
diff --git a/Bindings/pinctrl/atmel,at91-pinctrl.txt b/Bindings/pinctrl/atmel,at91-pinctrl.txt
index 02ab5ab198a4..b7a93e80a302 100644
--- a/Bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -19,6 +19,7 @@ such as pull-up, multi drive, etc.
 
 Required properties for iomux controller:
 - compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
+		or "atmel,sama5d3-pinctrl"
 - atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
   configured in this periph mode. All the periph and bank need to be describe.
 
@@ -85,13 +86,20 @@ Required properties for pin configuration node:
   PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
 
 Bits used for CONFIG:
-PULL_UP		(1 << 0): indicate this pin need a pull up.
-MULTIDRIVE	(1 << 1): indicate this pin need to be configured as multidrive.
-DEGLITCH	(1 << 2): indicate this pin need deglitch.
-PULL_DOWN	(1 << 3): indicate this pin need a pull down.
-DIS_SCHMIT	(1 << 4): indicate this pin need to disable schmit trigger.
-DEBOUNCE	(1 << 16): indicate this pin need debounce.
-DEBOUNCE_VAL	(0x3fff << 17): debounce val.
+PULL_UP		(1 << 0): indicate this pin needs a pull up.
+MULTIDRIVE	(1 << 1): indicate this pin needs to be configured as multi-drive.
+			Multi-drive is equivalent to open-drain type output.
+DEGLITCH	(1 << 2): indicate this pin needs deglitch.
+PULL_DOWN	(1 << 3): indicate this pin needs a pull down.
+DIS_SCHMIT	(1 << 4): indicate this pin needs to the disable schmitt trigger.
+DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the
+			following values:
+				00 - No change (reset state value kept)
+				01 - Low
+				10 - Medium
+				11 - High
+DEBOUNCE	(1 << 16): indicate this pin needs debounce.
+DEBOUNCE_VAL	(0x3fff << 17): debounce value.
 
 NOTE:
 Some requirements for using atmel,at91rm9200-pinctrl binding:
diff --git a/Bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
index a186181c402b..51b943cc9770 100644
--- a/Bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
+++ b/Bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-TZ1090-PDC's pin configuration nodes act as a container for an abitrary number
+TZ1090-PDC's pin configuration nodes act as a container for an arbitrary number
 of subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Bindings/pinctrl/img,tz1090-pinctrl.txt b/Bindings/pinctrl/img,tz1090-pinctrl.txt
index 4b27c99f7f9d..509faa87ad0e 100644
--- a/Bindings/pinctrl/img,tz1090-pinctrl.txt
+++ b/Bindings/pinctrl/img,tz1090-pinctrl.txt
@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-TZ1090's pin configuration nodes act as a container for an abitrary number of
+TZ1090's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
@@ -67,7 +67,7 @@ Valid values for pin and group names are:
     They also all support the some form of muxing. Any pins which are contained
     in one of the mux groups (see below) can be muxed only to the functions
     supported by the mux group. All other pins can be muxed to the "perip"
-    function which which enables them with their intended peripheral.
+    function which enables them with their intended peripheral.
 
     Different pins in the same mux group cannot be muxed to different functions,
     however it is possible to mux only a subset of the pins in a mux group to a
diff --git a/Bindings/pinctrl/lantiq,falcon-pinumx.txt b/Bindings/pinctrl/lantiq,falcon-pinumx.txt
index daa768956069..ac4da9fe07bd 100644
--- a/Bindings/pinctrl/lantiq,falcon-pinumx.txt
+++ b/Bindings/pinctrl/lantiq,falcon-pinumx.txt
@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Lantiq's pin configuration nodes act as a container for an abitrary number of
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those group(s), and two pin configuration parameters:
diff --git a/Bindings/pinctrl/lantiq,xway-pinumx.txt b/Bindings/pinctrl/lantiq,xway-pinumx.txt
index b5469db1d7ad..e89b4677567d 100644
--- a/Bindings/pinctrl/lantiq,xway-pinumx.txt
+++ b/Bindings/pinctrl/lantiq,xway-pinumx.txt
@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Lantiq's pin configuration nodes act as a container for an abitrary number of
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those group(s), and two pin configuration parameters:
diff --git a/Bindings/pinctrl/meson,pinctrl.txt b/Bindings/pinctrl/meson,pinctrl.txt
new file mode 100644
index 000000000000..17e7240c6998
--- /dev/null
+++ b/Bindings/pinctrl/meson,pinctrl.txt
@@ -0,0 +1,96 @@
+== Amlogic Meson pinmux controller ==
+
+Required properties for the root node:
+ - compatible: "amlogic,meson8-pinctrl"
+ - reg: address and size of registers controlling irq functionality
+
+=== GPIO sub-nodes ===
+
+The 2 power domains of the controller (regular and always-on) are
+represented as sub-nodes and each of them acts as a GPIO controller.
+
+Required properties for sub-nodes are:
+ - reg: should contain address and size for mux, pull-enable, pull and
+   gpio register sets
+ - reg-names: an array of strings describing the "reg" entries. Must
+   contain "mux", "pull" and "gpio". "pull-enable" is optional and
+   when it is missing the "pull" registers are used instead
+ - gpio-controller: identifies the node as a gpio controller
+ - #gpio-cells: must be 2
+
+Valid sub-node names are:
+ - "banks" for the regular domain
+ - "ao-bank" for the always-on domain
+
+=== Other sub-nodes ===
+
+Child nodes without the "gpio-controller" represent some desired
+configuration for a pin or a group. Those nodes can be pinmux nodes or
+configuration nodes.
+
+Required properties for pinmux nodes are:
+ - groups: a list of pinmux groups. The list of all available groups
+   depends on the SoC and can be found in driver sources.
+ - function: the name of a function to activate for the specified set
+   of groups. The list of all available functions depends on the SoC
+   and can be found in driver sources.
+
+Required properties for configuration nodes:
+ - pins: a list of pin names
+
+Configuration nodes support the generic properties "bias-disable",
+"bias-pull-up" and "bias-pull-down", described in file
+pinctrl-bindings.txt
+
+=== Example ===
+
+	pinctrl: pinctrl@c1109880 {
+		compatible = "amlogic,meson8-pinctrl";
+		reg = <0xc1109880 0x10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio: banks@c11080b0 {
+			reg = <0xc11080b0 0x28>,
+			      <0xc11080e8 0x18>,
+			      <0xc1108120 0x18>,
+			      <0xc1108030 0x30>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+               };
+
+		gpio_ao: ao-bank@c1108030 {
+			reg = <0xc8100014 0x4>,
+			      <0xc810002c 0x4>,
+			      <0xc8100024 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		nand {
+			mux {
+				groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
+					 "nand_io_rb0", "nand_ale", "nand_cle",
+					 "nand_wen_clk", "nand_ren_clk", "nand_dqs",
+					 "nand_ce2", "nand_ce3";
+				function = "nand";
+			};
+		};
+
+		uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a",
+					 "uart_cts_ao_a", "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+
+			conf {
+				pins = "GPIOAO_0", "GPIOAO_1",
+				       "GPIOAO_2", "GPIOAO_3";
+				bias-disable;
+			};
+		};
+	};
diff --git a/Bindings/pinctrl/nvidia,tegra124-pinmux.txt b/Bindings/pinctrl/nvidia,tegra124-pinmux.txt
index 6464bf769460..ecb5c0d25218 100644
--- a/Bindings/pinctrl/nvidia,tegra124-pinmux.txt
+++ b/Bindings/pinctrl/nvidia,tegra124-pinmux.txt
@@ -6,10 +6,12 @@ nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as
 a baseline, and only documents the differences between the two bindings.
 
 Required properties:
-- compatible: "nvidia,tegra124-pinmux"
+- compatible: For Tegra124, must contain "nvidia,tegra124-pinmux".  For
+  Tegra132, must contain '"nvidia,tegra132-pinmux", "nvidia-tegra124-pinmux"'.
 - reg: Should contain a list of base address and size pairs for:
     -- first entry - the drive strength and pad control registers.
     -- second entry - the pinmux registers
+    -- third entry - the MIPI_PAD_CTRL register
 
 Tegra124 adds the following optional properties for pin configuration subnodes.
 The macros for options are defined in the
@@ -91,6 +93,12 @@ Valid values for pin and group names are:
     dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
     gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4.
 
+  MIPI pad control groups:
+
+    These support only the nvidia,function property.
+
+    dsi_b
+
 Valid values for nvidia,functions are:
 
   blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
@@ -101,14 +109,15 @@ Valid values for nvidia,functions are:
   sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta,
   uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6,
   vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1,
-  dp, rtck, sys, clk tmds.
+  dp, rtck, sys, clk tmds, csi, dsi_b
 
 Example:
 
 	pinmux: pinmux {
 		compatible = "nvidia,tegra124-pinmux";
-		reg = <0x70000868 0x164		/* Pad control registers */
-		       0x70003000 0x434>;	/* PinMux registers */
+		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
+		      <0x0 0x70000820 0x0 0x8>;   /* MIPI pad control */
 	};
 
 Example pinmux entries:
diff --git a/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
index 2f9c0bd66457..30676ded85bb 100644
--- a/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
+++ b/Bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
@@ -13,7 +13,9 @@ how to describe and reference PHYs in device trees.
 
 Required properties:
 --------------------
-- compatible: should be "nvidia,tegra124-xusb-padctl"
+- compatible: For Tegra124, must contain "nvidia,tegra124-xusb-padctl".
+  Otherwise, must contain '"nvidia,<chip>-xusb-padctl",
+  "nvidia-tegra124-xusb-padctl"', where <chip> is tegra132 or tegra210.
 - reg: Physical base address and length of the controller's registers.
 - resets: Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
diff --git a/Bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Bindings/pinctrl/nvidia,tegra20-pinmux.txt
index 61e73cde9ae9..3c8ce28baad6 100644
--- a/Bindings/pinctrl/nvidia,tegra20-pinmux.txt
+++ b/Bindings/pinctrl/nvidia,tegra20-pinmux.txt
@@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Tegra's pin configuration nodes act as a container for an abitrary number of
+Tegra's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Bindings/pinctrl/pinctrl-bindings.txt b/Bindings/pinctrl/pinctrl-bindings.txt
index fa40a177164c..47d84b6ee91b 100644
--- a/Bindings/pinctrl/pinctrl-bindings.txt
+++ b/Bindings/pinctrl/pinctrl-bindings.txt
@@ -127,6 +127,24 @@ whether there is any interaction between the child and intermediate parent
 nodes, is again defined entirely by the binding for the individual pin
 controller device.
 
+== Generic pin multiplexing node content ==
+
+pin multiplexing nodes:
+
+function		- the mux function to select
+groups			- the list of groups to select with this function
+
+Example:
+
+state_0_node_a {
+	function = "uart0";
+	groups = "u0rxtx", "u0rtscts";
+};
+state_1_node_a {
+	function = "spi0";
+	groups = "spi0pins";
+};
+
 == Generic pin configuration node content ==
 
 Many data items that are represented in a pin configuration node are common
@@ -139,8 +157,12 @@ structure of the DT nodes that contain these properties.
 Supported generic properties are:
 
 pins			- the list of pins that properties in the node
-			  apply to
-function		- the mux function to select
+			  apply to (either this or "group" has to be
+			  specified)
+group			- the group to apply the properties to, if the driver
+			  supports configuration of whole groups rather than
+			  individual pins (either this or "pins" has to be
+			  specified)
 bias-disable		- disable any pin bias
 bias-high-impedance	- high impedance mode ("third-state", "floating")
 bias-bus-hold		- latch weakly
@@ -163,6 +185,21 @@ output-low		- set the pin to output mode with low level
 output-high		- set the pin to output mode with high level
 slew-rate		- set the slew rate
 
+For example:
+
+state_0_node_a {
+	pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+	bias-pull-up;
+};
+state_1_node_a {
+	pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
+	output-high;
+};
+state_2_node_a {
+	group = "foo-group";
+	bias-pull-up;
+};
+
 Some of the generic properties take arguments. For those that do, the
 arguments are described below.
 
@@ -170,15 +207,6 @@ arguments are described below.
   binding for the hardware defines:
   - Whether the entries are integers or strings, and their meaning.
 
-- function takes a list of function names/IDs as a required argument. The
-  specific binding for the hardware defines:
-  - Whether the entries are integers or strings, and their meaning.
-  - Whether only a single entry is allowed (which is applied to all entries
-    in the pins property), or whether there may alternatively be one entry per
-    entry in the pins property, in which case the list lengths must match, and
-    for each list index i, the function at list index i is applied to the pin
-    at list index i.
-
 - bias-pull-up, -down and -pin-default take as optional argument on hardware
   supporting it the pull strength in Ohm. bias-disable will disable the pull.
 
@@ -188,4 +216,4 @@ arguments are described below.
   or 0 to disable debouncing
 
 More in-depth documentation on these parameters can be found in
-<include/linux/pinctrl/pinconfig-generic.h>
+<include/linux/pinctrl/pinconf-generic.h>
diff --git a/Bindings/pinctrl/pinctrl-sirf.txt b/Bindings/pinctrl/pinctrl-sirf.txt
index c596a6ad3285..5f55be59d914 100644
--- a/Bindings/pinctrl/pinctrl-sirf.txt
+++ b/Bindings/pinctrl/pinctrl-sirf.txt
@@ -13,7 +13,7 @@ Optional properties:
 Please refer to pinctrl-bindings.txt in this directory for details of the common
 pinctrl bindings used by client devices.
 
-SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
+SiRFprimaII's pinmux nodes act as a container for an arbitrary number of subnodes.
 Each of these subnodes represents some desired configuration for a group of pins.
 
 Required subnode-properties:
diff --git a/Bindings/pinctrl/pinctrl_spear.txt b/Bindings/pinctrl/pinctrl_spear.txt
index b4480d5c3aca..458615596946 100644
--- a/Bindings/pinctrl/pinctrl_spear.txt
+++ b/Bindings/pinctrl/pinctrl_spear.txt
@@ -32,7 +32,7 @@ Required properties:
 Please refer to pinctrl-bindings.txt in this directory for details of the common
 pinctrl bindings used by client devices.
 
-SPEAr's pinmux nodes act as a container for an abitrary number of subnodes. Each
+SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each
 of these subnodes represents muxing for a pin, a group, or a list of pins or
 groups.
 
diff --git a/Bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Bindings/pinctrl/qcom,apq8064-pinctrl.txt
index 0211c6d8a522..a7bde64798c7 100644
--- a/Bindings/pinctrl/qcom,apq8064-pinctrl.txt
+++ b/Bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
@@ -50,7 +50,7 @@ Valid values for function are:
   gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6,
   gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1,
   gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm,
-  riva_wlan, sdc2, sdc4, slimbus, spkr_i2s, tsif1, tsif2, usb2_hsic,
+  riva_wlan, sdc2, sdc4, slimbus, spkr_i2s, tsif1, tsif2, usb2_hsic, ps_hold
 
 Example:
 
@@ -62,7 +62,7 @@ Example:
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		interrupts = <0 32 0x4>;
+		interrupts = <0 16 0x4>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&gsbi5_uart_default>;
diff --git a/Bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Bindings/pinctrl/qcom,apq8084-pinctrl.txt
new file mode 100644
index 000000000000..c4ea61ac56f2
--- /dev/null
+++ b/Bindings/pinctrl/qcom,apq8084-pinctrl.txt
@@ -0,0 +1,179 @@
+Qualcomm APQ8084 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8960 platform.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,apq8084-pinctrl"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.  Valid pins are:
+		    gpio0-gpio146,
+		    sdc1_clk,
+		    sdc1_cmd,
+		    sdc1_data
+		    sdc2_clk,
+		    sdc2_cmd,
+		    sdc2_data
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins. Functions are only valid for gpio pins.
+		    Valid values are:
+		    adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+		    blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
+		    blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
+		    blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5,
+		    blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
+		    blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3,
+		    blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8,
+		    blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
+		    blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
+		    blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
+		    blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
+		    cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1,
+		    cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+		    edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt, gcc_vtt,i
+		    gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio,
+		    hdmi_cec, hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic,
+		    ldo_en, ldo_update, mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst,
+		    pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s,
+		    qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n,
+		    sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus,
+		    spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s, tsif1,
+		    tsif2, uim, uim_batt_alarm
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull up.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+		    Not valid for sdc pins.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+		    Not valid for sdc pins.
+
+- drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins, in mA.
+		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+	tlmm: pinctrl@fd510000 {
+		compatible = "qcom,apq8084-pinctrl";
+		reg = <0xfd510000 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts = <0 208 0>;
+
+		uart2: uart2-default {
+			mux {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+			};
+
+			tx {
+				pins = "gpio4";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};
diff --git a/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt
index e33e4dcdce79..6e88e91feb11 100644
--- a/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt
+++ b/Bindings/pinctrl/qcom,ipq8064-pinctrl.txt
@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Bindings/pinctrl/qcom,msm8916-pinctrl.txt b/Bindings/pinctrl/qcom,msm8916-pinctrl.txt
new file mode 100644
index 000000000000..498caff6029e
--- /dev/null
+++ b/Bindings/pinctrl/qcom,msm8916-pinctrl.txt
@@ -0,0 +1,186 @@
+Qualcomm MSM8916 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8916 platform.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,msm8916-pinctrl"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 2. Specifying the pin number and flags, as defined
+		    in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.  Valid pins are:
+		    gpio0-gpio121,
+		    sdc1_clk,
+		    sdc1_cmd,
+		    sdc1_data
+		    sdc2_clk,
+		    sdc2_cmd,
+		    sdc2_data,
+		    qdsd_cmd,
+		    qdsd_data0,
+		    qdsd_data1,
+		    qdsd_data2,
+		    qdsd_data3
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins. Functions are only valid for gpio pins.
+		    Valid values are:
+	adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
+	atest_char1, atest_char2, atest_char3, atest_combodac, atest_gpsadc0,
+	atest_gpsadc1, atest_tsens, atest_wlan0, atest_wlan1, backlight_en,
+	bimc_dte0,bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
+	blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2,
+	blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3,
+	blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4,
+	blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2,
+	cam1_rst, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c,
+	cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out,
+	display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us,
+	ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+	gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, gsm0_tx1,
+	gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, ldo_en,
+	ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, nav_pps, nav_tsync,
+	pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc,
+	pwr_crypto_enabled_a, pwr_crypto_enabled_b, pwr_modem_enabled_a,
+	pwr_modem_enabled_b, pwr_nav_enabled_a, pwr_nav_enabled_b,
+	qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, qdss_ctitrig_in_b0,
+	qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, qdss_ctitrig_out_a1,
+	qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, qdss_traceclk_a,
+	qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+	qdss_tracedata_b, reset_n, sd_card, sd_write, sec_mi2s, smb_int,
+	ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm,
+	wcss_wlan, webcam1_rst
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configued as pull up.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+		    Not valid for sdc pins.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+		    Not valid for sdc pins.
+
+- drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins, in mA.
+		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+	tlmm: pinctrl@1000000 {
+		compatible = "qcom,msm8916-pinctrl";
+		reg = <0x1000000 0x300000>;
+		interrupts = <0 208 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		uart2: uart2-default {
+			mux {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+			};
+
+			tx {
+				pins = "gpio4";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			rx {
+				pins = "gpio5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+		};
+	};
diff --git a/Bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
index 93b7de91b9f6..eb8d8aa41f20 100644
--- a/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
+++ b/Bindings/pinctrl/qcom,msm8960-pinctrl.txt
@@ -47,7 +47,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Bindings/pinctrl/qcom,msm8974-pinctrl.txt
index d2ea80dc43eb..e4d6a9d20f7d 100644
--- a/Bindings/pinctrl/qcom,msm8974-pinctrl.txt
+++ b/Bindings/pinctrl/qcom,msm8974-pinctrl.txt
@@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
 subnodes. Each of these subnodes represents some desired configuration for a
 pin, a group, or a list of pins or groups. This configuration can include the
 mux function to select on those pin(s)/group(s), and various pin configuration
diff --git a/Bindings/pinctrl/qcom,pmic-gpio.txt b/Bindings/pinctrl/qcom,pmic-gpio.txt
new file mode 100644
index 000000000000..7ed08048516a
--- /dev/null
+++ b/Bindings/pinctrl/qcom,pmic-gpio.txt
@@ -0,0 +1,215 @@
+Qualcomm PMIC GPIO block
+
+This binding describes the GPIO block(s) found in the 8xxx series of
+PMIC's from Qualcomm.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8018-gpio"
+		    "qcom,pm8038-gpio"
+		    "qcom,pm8058-gpio"
+		    "qcom,pm8917-gpio"
+		    "qcom,pm8921-gpio"
+		    "qcom,pm8941-gpio"
+		    "qcom,pma8084-gpio"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Register base of the GPIO block and length.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Must contain an array of encoded interrupt specifiers for
+		    each available GPIO
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: Mark the device node as a GPIO controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 2;
+		    the first cell will be used to define gpio number and the
+		    second denotes the flags for this gpio
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin or a list of pins. This configuration can include the
+mux function to select on those pin(s), and various pin configuration
+parameters, as listed below.
+
+
+SUBNODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of gpio pins affected by the properties specified in
+		    this subnode.  Valid pins are:
+		    gpio1-gpio6 for pm8018
+		    gpio1-gpio12 for pm8038
+		    gpio1-gpio40 for pm8058
+		    gpio1-gpio38 for pm8917
+		    gpio1-gpio44 for pm8921
+		    gpio1-gpio36 for pm8941
+		    gpio1-gpio22 for pma8084
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins.  Valid values are:
+		    "normal",
+		    "paired",
+		    "func1",
+		    "func2",
+		    "dtest1",
+		    "dtest2",
+		    "dtest3",
+		    "dtest4"
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as no pull.
+
+- bias-pull-down:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as pull down.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <empty>
+	Definition: The specified pins should be configured as pull up.
+
+- qcom,pull-up-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Specifies the strength to use for pull up, if selected.
+		    Valid values are; as defined in
+		    <dt-bindings/pinctrl/qcom,pmic-gpio.h>:
+		    1: 30uA                     (PMIC_GPIO_PULL_UP_30)
+		    2: 1.5uA                    (PMIC_GPIO_PULL_UP_1P5)
+		    3: 31.5uA                   (PMIC_GPIO_PULL_UP_31P5)
+		    4: 1.5uA + 30uA boost       (PMIC_GPIO_PULL_UP_1P5_30)
+		    If this property is ommited 30uA strength will be used if
+		    pull up is selected
+
+- bias-high-impedance:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins will put in high-Z mode and disabled.
+
+- input-enable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are put in input mode.
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+
+- power-source:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the power source for the specified pins. Valid
+		    power sources are defined per chip in
+		    <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+- qcom,drive-strength:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the drive strength for the specified pins. Value
+		    drive strengths are:
+		    0: no (PMIC_GPIO_STRENGTH_NO)
+		    1: high (PMIC_GPIO_STRENGTH_HIGH) 0.9mA @ 1.8V - 1.9mA @ 2.6V
+		    2: medium (PMIC_GPIO_STRENGTH_MED) 0.6mA @ 1.8V - 1.25mA @ 2.6V
+		    3: low (PMIC_GPIO_STRENGTH_LOW) 0.15mA @ 1.8V - 0.3mA @ 2.6V
+		    as defined in <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+- drive-push-pull:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in push-pull mode.
+
+- drive-open-drain:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in open-drain mode.
+
+- drive-open-source:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in open-source mode.
+
+Example:
+
+	pm8921_gpio: gpio@150 {
+		compatible = "qcom,pm8921-gpio";
+		reg = <0x150 0x160>;
+		interrupts = <192 1>, <193 1>, <194 1>,
+			     <195 1>, <196 1>, <197 1>,
+			     <198 1>, <199 1>, <200 1>,
+			     <201 1>, <202 1>, <203 1>,
+			     <204 1>, <205 1>, <206 1>,
+			     <207 1>, <208 1>, <209 1>,
+			     <210 1>, <211 1>, <212 1>,
+			     <213 1>, <214 1>, <215 1>,
+			     <216 1>, <217 1>, <218 1>,
+			     <219 1>, <220 1>, <221 1>,
+			     <222 1>, <223 1>, <224 1>,
+			     <225 1>, <226 1>, <227 1>,
+			     <228 1>, <229 1>, <230 1>,
+			     <231 1>, <232 1>, <233 1>,
+			     <234 1>, <235 1>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		pm8921_gpio_keys: gpio-keys {
+			volume-keys {
+				pins = "gpio20", "gpio21";
+				function = "normal";
+
+				input-enable;
+				bias-pull-up;
+				drive-push-pull;
+				qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+				power-source = <PM8921_GPIO_S4>;
+			};
+		};
+	};
diff --git a/Bindings/pinctrl/qcom,pmic-mpp.txt b/Bindings/pinctrl/qcom,pmic-mpp.txt
new file mode 100644
index 000000000000..854774b194ed
--- /dev/null
+++ b/Bindings/pinctrl/qcom,pmic-mpp.txt
@@ -0,0 +1,162 @@
+Qualcomm PMIC Multi-Purpose Pin (MPP) block
+
+This binding describes the MPP block(s) found in the 8xxx series
+of PMIC's from Qualcomm.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: Should contain one of:
+		    "qcom,pm8841-mpp",
+		    "qcom,pm8941-mpp",
+		    "qcom,pma8084-mpp",
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Register base of the MPP block and length.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: Must contain an array of encoded interrupt specifiers for
+		    each available MPP
+
+- gpio-controller:
+	Usage: required
+	Value type: <none>
+	Definition: Mark the device node as a GPIO controller
+
+- #gpio-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: Must be 2;
+		    the first cell will be used to define MPP number and the
+		    second denotes the flags for this MPP
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin or a list of pins. This configuration can include the
+mux function to select on those pin(s), and various pin configuration
+parameters, as listed below.
+
+SUBNODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+	Usage: required
+	Value type: <string-array>
+	Definition: List of MPP pins affected by the properties specified in
+		    this subnode.  Valid pins are:
+		    mpp1-mpp4 for pm8841
+		    mpp1-mpp8 for pm8941
+		    mpp1-mpp4 for pma8084
+
+- function:
+	Usage: required
+	Value type: <string>
+	Definition: Specify the alternative function to be configured for the
+		    specified pins.  Valid values are:
+		    "normal",
+		    "paired",
+		    "dtest1",
+		    "dtest2",
+		    "dtest3",
+		    "dtest4"
+
+- bias-disable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins should be configured as no pull.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <u32>
+	Definition: The specified pins should be configured as pull up.
+		    Valid values are 600, 10000 and 30000 in bidirectional mode
+		    only, i.e. when operating in qcom,analog-mode and input and
+		    outputs are enabled. The hardware ignores the configuration
+		    when operating in other modes.
+
+- bias-high-impedance:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins will put in high-Z mode and disabled.
+
+- input-enable:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are put in input mode, i.e. their input
+		    buffer is enabled
+
+- output-high:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    high.
+
+- output-low:
+	Usage: optional
+	Value type: <none>
+	Definition: The specified pins are configured in output mode, driven
+		    low.
+
+- power-source:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the power source for the specified pins. Valid power
+		    sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+- qcom,analog-mode:
+	Usage: optional
+	Value type: <none>
+	Definition: Selects Analog mode of operation: combined with input-enable
+		    and/or output-high, output-low MPP could operate as
+		    Bidirectional Logic, Analog Input, Analog Output.
+
+- qcom,amux-route:
+	Usage: optional
+	Value type: <u32>
+	Definition: Selects the source for analog input. Valid values are
+		    defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+		    PMIC_MPP_AMUX_ROUTE_CH5, PMIC_MPP_AMUX_ROUTE_CH6...
+
+Example:
+
+	mpps@a000 {
+		compatible = "qcom,pm8841-mpp";
+		reg = <0xa000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pm8841_default>;
+
+		pm8841_default: default {
+			gpio {
+				pins = "mpp1", "mpp2", "mpp3", "mpp4";
+				function = "normal";
+				input-enable;
+				power-source = <PM8841_MPP_S3>;
+			};
+		};
+	};
diff --git a/Bindings/pinctrl/renesas,pfc-pinctrl.txt b/Bindings/pinctrl/renesas,pfc-pinctrl.txt
index daef6fad6a5f..bfe72ec055e3 100644
--- a/Bindings/pinctrl/renesas,pfc-pinctrl.txt
+++ b/Bindings/pinctrl/renesas,pfc-pinctrl.txt
@@ -1,7 +1,7 @@
 * Renesas Pin Function Controller (GPIO and Pin Mux/Config)
 
-The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH7372,
-SH73A0, R8A73A4 and R8A7740 it also acts as a GPIO controller.
+The Pin Function Controller (PFC) is a Pin Mux/Config controller. On SH73A0,
+R8A73A4 and R8A7740 it also acts as a GPIO controller.
 
 
 Pin Control
@@ -10,13 +10,13 @@ Pin Control
 Required Properties:
 
   - compatible: should be one of the following.
+    - "renesas,pfc-emev2": for EMEV2 (EMMA Mobile EV2) compatible pin-controller.
     - "renesas,pfc-r8a73a4": for R8A73A4 (R-Mobile APE6) compatible pin-controller.
     - "renesas,pfc-r8a7740": for R8A7740 (R-Mobile A1) compatible pin-controller.
     - "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller.
     - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller.
     - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller.
     - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2) compatible pin-controller.
-    - "renesas,pfc-sh7372": for SH7372 (SH-Mobile AP4) compatible pin-controller.
     - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller.
 
   - reg: Base address and length of each memory resource used by the pin
@@ -75,8 +75,7 @@ bias-disable, bias-pull-up and bias-pull-down.
 GPIO
 ----
 
-On SH7372, SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller
-node.
+On SH73A0, R8A73A4 and R8A7740 the PFC node is also a GPIO controller node.
 
 Required Properties:
 
diff --git a/Bindings/pinctrl/rockchip,pinctrl.txt b/Bindings/pinctrl/rockchip,pinctrl.txt
index 4658b69d4f4d..388b213249fd 100644
--- a/Bindings/pinctrl/rockchip,pinctrl.txt
+++ b/Bindings/pinctrl/rockchip,pinctrl.txt
@@ -2,8 +2,8 @@
 
 The Rockchip Pinmux Controller, enables the IC
 to share one PAD to several functional blocks. The sharing is done by
-multiplexing the PAD input/output signals. For each PAD there are up to
-4 muxing options with option 0 being the use as a GPIO.
+multiplexing the PAD input/output signals. For each PAD there are several
+muxing options with option 0 being the use as a GPIO.
 
 Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
@@ -58,7 +58,7 @@ Deprecated properties for gpio sub nodes:
 Required properties for pin configuration node:
   - rockchip,pins: 3 integers array, represents a group of pins mux and config
     setting. The format is rockchip,pins = <PIN_BANK PIN_BANK_IDX MUX &phandle>.
-    The MUX 0 means gpio and MUX 1 to 3 mean the specific device function.
+    The MUX 0 means gpio and MUX 1 to N mean the specific device function.
     The phandle of a node containing the generic pinconfig options
     to use, as described in pinctrl-bindings.txt in this directory.
 
diff --git a/Bindings/pinctrl/samsung-pinctrl.txt b/Bindings/pinctrl/samsung-pinctrl.txt
index e82aaf492517..9d2a995293e6 100644
--- a/Bindings/pinctrl/samsung-pinctrl.txt
+++ b/Bindings/pinctrl/samsung-pinctrl.txt
@@ -18,6 +18,7 @@ Required Properties:
   - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
   - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
   - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
+  - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
 
 - reg: Base address of the pin controller hardware module and length of
   the address space it occupies.
@@ -136,6 +137,8 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
        found on Samsung S3C64xx SoCs,
      - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
        found on Samsung Exynos4210 and S5PC110/S5PV210 SoCs.
+     - samsung,exynos7-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung Exynos7 SoC.
    - interrupt-parent: phandle of the interrupt parent to which the external
      wakeup interrupts are forwarded to.
    - interrupts: interrupt used by multiplexed wakeup interrupts.
@@ -168,6 +171,18 @@ Aliases:
 All the pin controller nodes should be represented in the aliases node using
 the following format 'pinctrl{n}' where n is a unique number for the alias.
 
+Aliases for controllers compatible with "samsung,exynos7-pinctrl":
+- pinctrl0: pin controller of ALIVE block,
+- pinctrl1: pin controller of BUS0 block,
+- pinctrl2: pin controller of NFC block,
+- pinctrl3: pin controller of TOUCH block,
+- pinctrl4: pin controller of FF block,
+- pinctrl5: pin controller of ESE block,
+- pinctrl6: pin controller of FSYS0 block,
+- pinctrl7: pin controller of FSYS1 block,
+- pinctrl8: pin controller of BUS1 block,
+- pinctrl9: pin controller of AUDIO block,
+
 Example: A pin-controller node with pin banks:
 
 	pinctrl_0: pinctrl@11400000 {
diff --git a/Bindings/pinctrl/ste,abx500.txt b/Bindings/pinctrl/ste,abx500.txt
index e3865e136067..87697420439e 100644
--- a/Bindings/pinctrl/ste,abx500.txt
+++ b/Bindings/pinctrl/ste,abx500.txt
@@ -8,42 +8,8 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
 phrase "pin configuration node".
 
-ST Ericsson's pin configuration nodes act as a container for an arbitrary number of
-subnodes. Each of these subnodes represents some desired configuration for a
-pin, a group, or a list of pins or groups. This configuration can include the
-mux function to select on those pin(s)/group(s), and various pin configuration
-parameters, such as input, output, pull up, pull down...
-
-The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
-
-Required subnode-properties:
-- ste,pins : An array of strings. Each string contains the name of a pin or
-    group.
-
-Optional subnode-properties:
-- ste,function: A string containing the name of the function to mux to the
-  pin or group.
-
-- generic pin configuration option to use. Example :
-
-	default_cfg {
-		ste,pins = "GPIO1";
-		bias-disable;
-	};
-
-- ste,config: Handle of pin configuration node containing the generic
-  pinconfig options to use, as described in pinctrl-bindings.txt in
-  this directory. Example :
-
-	pcfg_bias_disable: pcfg_bias_disable {
-		bias-disable;
-	};
-
-	default_cfg {
-		ste,pins = "GPIO1";
-		ste.config = <&pcfg_bias_disable>;
-	};
+ST Ericsson's pin configuration nodes use the generic pin multiplexing
+and pin configuration bindings, see pinctrl-bindings.txt
 
 Example board file extract:
 
@@ -54,11 +20,11 @@ Example board file extract:
 	sysclkreq2 {
 		sysclkreq2_default_mode: sysclkreq2_default {
 			default_mux {
-				ste,function = "sysclkreq";
-				ste,pins = "sysclkreq2_d_1";
+				function = "sysclkreq";
+				groups = "sysclkreq2_d_1";
 			};
 			default_cfg {
-				ste,pins = "GPIO1";
+				pins = "GPIO1";
 				bias-disable;
 			};
 		};
@@ -66,11 +32,11 @@ Example board file extract:
 	sysclkreq3 {
 		sysclkreq3_default_mode: sysclkreq3_default {
 			default_mux {
-				ste,function = "sysclkreq";
-				ste,pins = "sysclkreq3_d_1";
+				function = "sysclkreq";
+				groups = "sysclkreq3_d_1";
 			};
 			default_cfg {
-				ste,pins = "GPIO2";
+				pins = "GPIO2";
 				output-low;
 			};
 		};
@@ -78,11 +44,11 @@ Example board file extract:
 	gpio3 {
 		gpio3_default_mode: gpio3_default {
 			default_mux {
-				ste,function = "gpio";
-				ste,pins = "gpio3_a_1";
+				function = "gpio";
+				groups = "gpio3_a_1";
 			};
 			default_cfg {
-				ste,pins = "GPIO3";
+				pins = "GPIO3";
 				output-low;
 			};
 		};
@@ -90,11 +56,11 @@ Example board file extract:
 	sysclkreq6 {
 		sysclkreq6_default_mode: sysclkreq6_default {
 			default_mux {
-				ste,function = "sysclkreq";
-				ste,pins = "sysclkreq6_d_1";
+				function = "sysclkreq";
+				groups = "sysclkreq6_d_1";
 			};
 			default_cfg {
-				ste,pins = "GPIO4";
+				pins = "GPIO4";
 				bias-disable;
 			};
 		};
@@ -102,11 +68,11 @@ Example board file extract:
 	pwmout1 {
 		pwmout1_default_mode: pwmout1_default {
 			default_mux {
-				ste,function = "pwmout";
-				ste,pins = "pwmout1_d_1";
+				function = "pwmout";
+				groups = "pwmout1_d_1";
 			};
 			default_cfg {
-				ste,pins = "GPIO14";
+				pins = "GPIO14";
 				output-low;
 			};
 		};
@@ -114,11 +80,11 @@ Example board file extract:
 	pwmout2 {
 		pwmout2_default_mode: pwmout2_default {
 			pwmout2_default_mux {
-				ste,function = "pwmout";
-				ste,pins = "pwmout2_d_1";
+				function = "pwmout";
+				groups = "pwmout2_d_1";
 			};
 			pwmout2_default_cfg {
-				ste,pins = "GPIO15";
+				pins = "GPIO15";
 				output-low;
 			};
 		};
@@ -126,11 +92,11 @@ Example board file extract:
 	pwmout3 {
 		pwmout3_default_mode: pwmout3_default {
 			pwmout3_default_mux {
-				ste,function = "pwmout";
-				ste,pins = "pwmout3_d_1";
+				function = "pwmout";
+				groups = "pwmout3_d_1";
 			};
 			pwmout3_default_cfg {
-				ste,pins = "GPIO16";
+				pins = "GPIO16";
 				output-low;
 			};
 		};
@@ -139,15 +105,15 @@ Example board file extract:
 
 		adi1_default_mode: adi1_default {
 			adi1_default_mux {
-				ste,function = "adi1";
-				ste,pins = "adi1_d_1";
+				function = "adi1";
+				groups = "adi1_d_1";
 			};
 			adi1_default_cfg1 {
-				ste,pins = "GPIO17","GPIO19","GPIO20";
+				pins = "GPIO17","GPIO19","GPIO20";
 				bias-disable;
 			};
 			adi1_default_cfg2 {
-				ste,pins = "GPIO18";
+				pins = "GPIO18";
 				output-low;
 			};
 		};
@@ -155,15 +121,15 @@ Example board file extract:
 	dmic12 {
 		dmic12_default_mode: dmic12_default {
 			dmic12_default_mux {
-				ste,function = "dmic";
-				ste,pins = "dmic12_d_1";
+				function = "dmic";
+				groups = "dmic12_d_1";
 			};
 			dmic12_default_cfg1 {
-				ste,pins = "GPIO27";
+				pins = "GPIO27";
 				output-low;
 			};
 			dmic12_default_cfg2 {
-				ste,pins = "GPIO28";
+				pins = "GPIO28";
 				bias-disable;
 			};
 		};
@@ -171,15 +137,15 @@ Example board file extract:
 	dmic34 {
 		dmic34_default_mode: dmic34_default {
 			dmic34_default_mux {
-				ste,function = "dmic";
-				ste,pins = "dmic34_d_1";
+				function = "dmic";
+				groups = "dmic34_d_1";
 			};
 			dmic34_default_cfg1 {
-				ste,pins = "GPIO29";
+				pins = "GPIO29";
 				output-low;
 			};
 			dmic34_default_cfg2 {
-				ste,pins = "GPIO30";
+				pins = "GPIO30";
 				bias-disable;{
 
 			};
@@ -188,15 +154,15 @@ Example board file extract:
 	dmic56 {
 		dmic56_default_mode: dmic56_default {
 			dmic56_default_mux {
-				ste,function = "dmic";
-				ste,pins = "dmic56_d_1";
+				function = "dmic";
+				groups = "dmic56_d_1";
 			};
 			dmic56_default_cfg1 {
-				ste,pins = "GPIO31";
+				pins = "GPIO31";
 				output-low;
 			};
 			dmic56_default_cfg2 {
-				ste,pins = "GPIO32";
+				pins = "GPIO32";
 				bias-disable;
 			};
 		};
@@ -204,11 +170,11 @@ Example board file extract:
 	sysclkreq5 {
 		sysclkreq5_default_mode: sysclkreq5_default {
 			sysclkreq5_default_mux {
-				ste,function = "sysclkreq";
-				ste,pins = "sysclkreq5_d_1";
+				function = "sysclkreq";
+				groups = "sysclkreq5_d_1";
 			};
 			sysclkreq5_default_cfg {
-				ste,pins = "GPIO42";
+				pins = "GPIO42";
 				output-low;
 			};
 		};
@@ -216,11 +182,11 @@ Example board file extract:
 	batremn {
 		batremn_default_mode: batremn_default {
 			batremn_default_mux {
-				ste,function = "batremn";
-				ste,pins = "batremn_d_1";
+				function = "batremn";
+				groups = "batremn_d_1";
 			};
 			batremn_default_cfg {
-				ste,pins = "GPIO43";
+				pins = "GPIO43";
 				bias-disable;
 			};
 		};
@@ -228,11 +194,11 @@ Example board file extract:
 	service {
 		service_default_mode: service_default {
 			service_default_mux {
-				ste,function = "service";
-				ste,pins = "service_d_1";
+				function = "service";
+				groups = "service_d_1";
 			};
 			service_default_cfg {
-				ste,pins = "GPIO44";
+				pins = "GPIO44";
 				bias-disable;
 			};
 		};
@@ -240,13 +206,13 @@ Example board file extract:
 	pwrctrl0 {
 		pwrctrl0_default_mux: pwrctrl0_mux {
 			pwrctrl0_default_mux {
-				ste,function = "pwrctrl";
-				ste,pins = "pwrctrl0_d_1";
+				function = "pwrctrl";
+				groups = "pwrctrl0_d_1";
 			};
 		};
 		pwrctrl0_default_mode: pwrctrl0_default {
 			pwrctrl0_default_cfg {
-				ste,pins = "GPIO45";
+				pins = "GPIO45";
 				bias-disable;
 			};
 		};
@@ -254,13 +220,13 @@ Example board file extract:
 	pwrctrl1 {
 		pwrctrl1_default_mux: pwrctrl1_mux {
 			pwrctrl1_default_mux {
-				ste,function = "pwrctrl";
-				ste,pins = "pwrctrl1_d_1";
+				function = "pwrctrl";
+				groups = "pwrctrl1_d_1";
 			};
 		};
 		pwrctrl1_default_mode: pwrctrl1_default {
 			pwrctrl1_default_cfg {
-				ste,pins = "GPIO46";
+				pins = "GPIO46";
 				bias-disable;
 			};
 		};
@@ -268,11 +234,11 @@ Example board file extract:
 	pwmextvibra1 {
 		pwmextvibra1_default_mode: pwmextvibra1_default {
 			pwmextvibra1_default_mux {
-				ste,function = "pwmextvibra";
-				ste,pins = "pwmextvibra1_d_1";
+				function = "pwmextvibra";
+				groups = "pwmextvibra1_d_1";
 			};
 			pwmextvibra1_default_cfg {
-				ste,pins = "GPIO47";
+				pins = "GPIO47";
 				bias-disable;
 			};
 		};
@@ -280,11 +246,11 @@ Example board file extract:
 	pwmextvibra2 {
 		pwmextvibra2_default_mode: pwmextvibra2_default {
 			pwmextvibra2_default_mux {
-				ste,function = "pwmextvibra";
-				ste,pins = "pwmextvibra2_d_1";
+				function = "pwmextvibra";
+				groups = "pwmextvibra2_d_1";
 			};
 			pwmextvibra1_default_cfg {
-				ste,pins = "GPIO48";
+				pins = "GPIO48";
 				bias-disable;
 			};
 		};
@@ -292,11 +258,11 @@ Example board file extract:
 	gpio51 {
 		gpio51_default_mode: gpio51_default {
 				gpio51_default_mux {
-				ste,function = "gpio";
-				ste,pins = "gpio51_a_1";
+				function = "gpio";
+				groups = "gpio51_a_1";
 			};
 			gpio51_default_cfg {
-				ste,pins = "GPIO51";
+				pins = "GPIO51";
 				output-low;
 			};
 		};
@@ -304,11 +270,11 @@ Example board file extract:
 	gpio52 {
 		gpio52_default_mode: gpio52_default {
 			gpio52_default_mux {
-				ste,function = "gpio";
-				ste,pins = "gpio52_a_1";
+				function = "gpio";
+				groups = "gpio52_a_1";
 			};
 			gpio52_default_cfg {
-				ste,pins = "GPIO52";
+				pins = "GPIO52";
 				bias-pull-down;
 			};
 		};
@@ -316,11 +282,11 @@ Example board file extract:
 	gpio53 {
 		gpio53_default_mode: gpio53_default {
 			gpio53_default_mux {
-				ste,function = "gpio";
-				ste,pins = "gpio53_a_1";
+				function = "gpio";
+				groups = "gpio53_a_1";
 			};
 			gpio53_default_cfg {
-				ste,pins = "GPIO53";
+				pins = "GPIO53";
 				bias-pull-down;
 			};
 		};
@@ -328,11 +294,11 @@ Example board file extract:
 	gpio54 {
 		gpio54_default_mode: gpio54_default {
 			gpio54_default_mux {
-				ste,function = "gpio";
-				ste,pins = "gpio54_a_1";
+				function = "gpio";
+				groups = "gpio54_a_1";
 			};
 			gpio54_default_cfg {
-				ste,pins = "GPIO54";
+				pins = "GPIO54";
 				output-low;
 			};
 		};
@@ -340,11 +306,11 @@ Example board file extract:
 	pdmclkdat {
 		pdmclkdat_default_mode: pdmclkdat_default {
 			pdmclkdat_default_mux {
-				ste,function = "pdm";
-				ste,pins = "pdmclkdat_d_1";
+				function = "pdm";
+				groups = "pdmclkdat_d_1";
 			};
 			pdmclkdat_default_cfg {
-				ste,pins = "GPIO55", "GPIO56";
+				pins = "GPIO55", "GPIO56";
 				bias-disable;
 			};
 		};
diff --git a/Bindings/pinctrl/ste,nomadik.txt b/Bindings/pinctrl/ste,nomadik.txt
index 6b33b9f18e88..f63fcb3ed352 100644
--- a/Bindings/pinctrl/ste,nomadik.txt
+++ b/Bindings/pinctrl/ste,nomadik.txt
@@ -16,17 +16,22 @@ mux function to select on those pin(s)/group(s), and various pin configuration
 parameters, such as input, output, pull up, pull down...
 
 The name of each subnode is not important; all subnodes should be enumerated
-and processed purely based on their content.
+and processed purely based on their content. The subnodes use the generic
+pin multiplexing node layout from the standard pin control bindings
+(see pinctrl-bindings.txt):
 
-Required subnode-properties:
-- ste,pins : An array of strings. Each string contains the name of a pin or
-    group.
-
-Optional subnode-properties:
-- ste,function: A string containing the name of the function to mux to the
+Required pin multiplexing subnode properties:
+- function: A string containing the name of the function to mux to the
   pin or group.
+- groups : An array of strings. Each string contains the name of a pin
+  group that will be combined with the function to form a multiplexing
+  set-up.
 
-- ste,config: Handle of pin configuration node (e.g. ste,config = <&slpm_in_wkup_pdis>)
+Required pin configuration subnode properties:
+- pins: A string array describing the pins affected by the configuration
+  in the node.
+- ste,config: Handle of pin configuration node
+  (e.g. ste,config = <&slpm_in_wkup_pdis>)
 
 - ste,input : <0/1/2>
 	0: input with no pull
@@ -97,32 +102,32 @@ Example board file extract:
 		uart0 {
 			uart0_default_mux: uart0_mux {
 				u0_default_mux {
-					ste,function = "u0";
-					ste,pins = "u0_a_1";
+					function = "u0";
+					pins = "u0_a_1";
 				};
 			};
 			uart0_default_mode: uart0_default {
 				uart0_default_cfg1 {
-					ste,pins = "GPIO0", "GPIO2";
+					pins = "GPIO0", "GPIO2";
 					ste,input = <1>;
 				};
 
 				uart0_default_cfg2 {
-					ste,pins = "GPIO1", "GPIO3";
+					pins = "GPIO1", "GPIO3";
 					ste,output = <1>;
 				};
 			};
 			uart0_sleep_mode: uart0_sleep {
 				uart0_sleep_cfg1 {
-					ste,pins = "GPIO0", "GPIO2";
+					pins = "GPIO0", "GPIO2";
 					ste,config = <&slpm_in_wkup_pdis>;
 				};
 				uart0_sleep_cfg2 {
-					ste,pins = "GPIO1";
+					pins = "GPIO1";
 					ste,config = <&slpm_out_hi_wkup_pdis>;
 				};
 				uart0_sleep_cfg3 {
-					ste,pins = "GPIO3";
+					pins = "GPIO3";
 					ste,config = <&slpm_out_wkup_pdis>;
 				};
 			};
diff --git a/Bindings/pinctrl/ti,omap-pinctrl.txt b/Bindings/pinctrl/ti,omap-pinctrl.txt
new file mode 100644
index 000000000000..88c80273da91
--- /dev/null
+++ b/Bindings/pinctrl/ti,omap-pinctrl.txt
@@ -0,0 +1,13 @@
+OMAP Pinctrl definitions
+
+Required properties:
+- compatible : Should be one of:
+  "ti,omap2420-padconf" - OMAP2420 compatible pinctrl
+  "ti,omap2430-padconf" - OMAP2430 compatible pinctrl
+  "ti,omap3-padconf" - OMAP3 compatible pinctrl
+  "ti,omap4-padconf" - OMAP4 compatible pinctrl
+  "ti,omap5-padconf" - OMAP5 compatible pinctrl
+  "ti,dra7-padconf" - DRA7 compatible pinctrl
+  "ti,am437-padconf" - AM437x compatible pinctrl
+
+See Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt for further details.
diff --git a/Bindings/pinctrl/xlnx,zynq-pinctrl.txt b/Bindings/pinctrl/xlnx,zynq-pinctrl.txt
new file mode 100644
index 000000000000..b7b55a964f65
--- /dev/null
+++ b/Bindings/pinctrl/xlnx,zynq-pinctrl.txt
@@ -0,0 +1,104 @@
+	Binding for Xilinx Zynq Pinctrl
+
+Required properties:
+- compatible: "xlnx,zynq-pinctrl"
+- syscon: phandle to SLCR
+- reg: Offset and length of pinctrl space in SLCR
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Zynq's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, slew rate, etc.
+
+Each configuration node can consist of multiple nodes describing the pinmux and
+pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Required properties for pinmux nodes are:
+ - groups: A list of pinmux groups.
+ - function: The name of a pinmux function to activate for the specified set
+   of groups.
+
+Required properties for configuration nodes:
+One of:
+ - pins: a list of pin names
+ - groups: A list of pinmux groups.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+ groups, function
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinconf subnode:
+ groups, pins, bias-disable, bias-high-impedance, bias-pull-up, slew-rate,
+ low-power-disable, low-power-enable
+
+ Valid arguments for 'slew-rate' are '0' and '1' to select between slow and fast
+ respectively.
+
+ Valid values for groups are:
+   ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp,
+   qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp,
+   spi0_1_grp - spi0_2_grp, spi1_0_grp - spi1_3_grp, sdio0_0_grp - sdio0_2_grp,
+   sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp,
+   sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand,
+   can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp,
+   uart1_0_grp - uart1_11_grp, i2c0_0_grp - i2c0_10_grp, i2c1_0_grp - i2c1_10_grp,
+   ttc0_0_grp - ttc0_2_grp, ttc1_0_grp - ttc1_2_grp, swdt0_0_grp - swdt0_4_grp,
+   gpio0_0_grp - gpio0_53_grp, usb0_0_grp, usb1_0_grp
+
+ Valid values for pins are:
+   MIO0 - MIO53
+
+ Valid values for function are:
+   ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1,
+   spi0, spi1, sdio0, sdio0_pc, sdio0_cd, sdio0_wp,
+   sdio1, sdio1_pc, sdio1_cd, sdio1_wp,
+   smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1,
+   i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1
+
+The following driver-specific properties as defined here are valid to specify in
+a pin configuration subnode:
+ - io-standard: Configure the pin to use the selected IO standard according to
+   this mapping:
+    1: LVCMOS18
+    2: LVCMOS25
+    3: LVCMOS33
+    4: HSTL
+
+Example:
+	pinctrl0: pinctrl@700 {
+		compatible = "xlnx,pinctrl-zynq";
+		reg = <0x700 0x200>;
+		syscon = <&slcr>;
+
+		pinctrl_uart1_default: uart1-default {
+			mux {
+				groups = "uart1_10_grp";
+				function = "uart1";
+			};
+
+			conf {
+				groups = "uart1_10_grp";
+				slew-rate = <0>;
+				io-standard = <1>;
+			};
+
+			conf-rx {
+				pins = "MIO49";
+				bias-high-impedance;
+			};
+
+			conf-tx {
+				pins = "MIO48";
+				bias-disable;
+			};
+		};
+	};
diff --git a/Bindings/power/ltc2941.txt b/Bindings/power/ltc2941.txt
new file mode 100644
index 000000000000..ea42ae12d924
--- /dev/null
+++ b/Bindings/power/ltc2941.txt
@@ -0,0 +1,27 @@
+binding for LTC2941 and LTC2943 battery gauges
+
+Both the LTC2941 and LTC2943 measure battery capacity.
+The LTC2943 is compatible with the LTC2941, it adds voltage and
+temperature monitoring, and uses a slightly different conversion
+formula for the charge counter.
+
+Required properties:
+- compatible: Should contain "ltc2941" or "ltc2943" which also indicates the
+    type of I2C chip attached.
+- reg: The 7-bit I2C address.
+- lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
+    negative value when the battery has been connected to the wrong end of the
+    resistor.
+- lltc,prescaler-exponent: The prescaler exponent as explained in the datasheet.
+    This determines the range and accuracy of the gauge. The value is programmed
+    into the chip only if it differs from the current setting. The setting is
+    lost when the battery is disconnected.
+
+Example from the Topic Miami Florida board:
+
+	fuelgauge: ltc2943@64 {
+		compatible = "ltc2943";
+		reg = <0x64>;
+		lltc,resistor-sense = <15>;
+		lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
+	};
diff --git a/Bindings/power/power-controller.txt b/Bindings/power/power-controller.txt
new file mode 100644
index 000000000000..4f7a3bc9c407
--- /dev/null
+++ b/Bindings/power/power-controller.txt
@@ -0,0 +1,18 @@
+* Generic system power control capability
+
+Power-management integrated circuits or miscellaneous hardware components are
+sometimes able to control the system power. The device driver associated with these
+components might need to define this capability, which tells the kernel that
+it can be used to switch off the system. The corresponding device must have the
+standard property "system-power-controller" in its device node. This property
+marks the device as able to control the system power. In order to test if this
+property is found programmatically, use the helper function
+"of_device_is_system_power_controller" from of.h .
+
+Example:
+
+act8846: act8846@5 {
+	 compatible = "active-semi,act8846";
+	 status = "okay";
+	 system-power-controller;
+}
diff --git a/Bindings/power/power_domain.txt b/Bindings/power/power_domain.txt
new file mode 100644
index 000000000000..98c16672ab5f
--- /dev/null
+++ b/Bindings/power/power_domain.txt
@@ -0,0 +1,49 @@
+* Generic PM domains
+
+System on chip designs are often divided into multiple PM domains that can be
+used for power gating of selected IP blocks for power saving by reduced leakage
+current.
+
+This device tree binding can be used to bind PM domain consumer devices with
+their PM domains provided by PM domain providers. A PM domain provider can be
+represented by any node in the device tree and can provide one or more PM
+domains. A consumer node can refer to the provider by a phandle and a set of
+phandle arguments (so called PM domain specifiers) of length specified by the
+#power-domain-cells property in the PM domain provider node.
+
+==PM domain providers==
+
+Required properties:
+ - #power-domain-cells : Number of cells in a PM domain specifier;
+   Typically 0 for nodes representing a single PM domain and 1 for nodes
+   providing multiple PM domains (e.g. power controllers), but can be any value
+   as specified by device tree binding documentation of particular provider.
+
+Example:
+
+	power: power-controller@12340000 {
+		compatible = "foo,power-controller";
+		reg = <0x12340000 0x1000>;
+		#power-domain-cells = <1>;
+	};
+
+The node above defines a power controller that is a PM domain provider and
+expects one cell as its phandle argument.
+
+==PM domain consumers==
+
+Required properties:
+ - power-domains : A phandle and PM domain specifier as defined by bindings of
+                   the power controller specified by phandle.
+
+Example:
+
+	leaky-device@12350000 {
+		compatible = "foo,i-leak-current";
+		reg = <0x12350000 0x1000>;
+		power-domains = <&power 0>;
+	};
+
+The node above defines a typical PM domain consumer device, which is located
+inside a PM domain with index 0 of a power controller represented by a node
+with the label "power".
diff --git a/Bindings/power/renesas,sysc-rmobile.txt b/Bindings/power/renesas,sysc-rmobile.txt
new file mode 100644
index 000000000000..cc3b1f0a9b1a
--- /dev/null
+++ b/Bindings/power/renesas,sysc-rmobile.txt
@@ -0,0 +1,99 @@
+DT bindings for the Renesas R-Mobile System Controller
+
+== System Controller Node ==
+
+The R-Mobile System Controller provides the following functions:
+  - Boot mode management,
+  - Reset generation,
+  - Power management.
+
+Required properties:
+- compatible: Should be "renesas,sysc-<soctype>", "renesas,sysc-rmobile" as
+	      fallback.
+	      Examples with soctypes are:
+		- "renesas,sysc-r8a7740" (R-Mobile A1)
+		- "renesas,sysc-sh73a0" (SH-Mobile AG5)
+- reg: Two address start and address range blocks for the device:
+         - The first block refers to the normally accessible registers,
+         - the second block refers to the registers protected by the HPB
+	   semaphore.
+
+Optional nodes:
+- pm-domains: This node contains a hierarchy of PM domain nodes, which should
+  match the Power Area Hierarchy in the Power Domain Specifications section of
+  the device's datasheet.
+
+
+== PM Domain Nodes ==
+
+Each of the PM domain nodes represents a PM domain, as documented by the
+generic PM domain bindings in
+Documentation/devicetree/bindings/power/power_domain.txt.
+
+The nodes should be named by the real power area names, and thus their names
+should be unique.
+
+Required properties:
+  - #power-domain-cells: Must be 0.
+
+Optional properties:
+- reg: If the PM domain is not always-on, this property must contain the bit
+       index number for the corresponding power area in the various Power
+       Control and Status Registers. The parent's node must contain the
+       following two properties:
+	 - #address-cells: Must be 1,
+	 - #size-cells: Must be 0.
+       If the PM domain is always-on, this property must be omitted.
+
+
+Example:
+
+This shows a subset of the r8a7740 PM domain hierarchy, containing the
+C5 "always-on" domain, 2 of its subdomains (A4S and A4SU), and the A3SP domain,
+which is a subdomain of A4S.
+
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+		reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+		pm-domains {
+			pd_c5: c5 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				pd_a4s: a4s@10 {
+					reg = <10>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3sp: a3sp@11 {
+						reg = <11>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4su: a4su@20 {
+					reg = <20>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+	};
+
+
+== PM Domain Consumers ==
+
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node.
+
+Example:
+
+	tpu: pwm@e6600000 {
+		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+		reg = <0xe6600000 0x100>;
+		clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
+		power-domains = <&pd_a3sp>;
+		#pwm-cells = <3>;
+	};
diff --git a/Bindings/power/reset/ltc2952-poweroff.txt b/Bindings/power/reset/ltc2952-poweroff.txt
new file mode 100644
index 000000000000..cd2d7f58a9d7
--- /dev/null
+++ b/Bindings/power/reset/ltc2952-poweroff.txt
@@ -0,0 +1,29 @@
+Binding for the LTC2952 PowerPath controller
+
+This chip is used to externally trigger a system shut down. Once the trigger has
+been sent, the chip's watchdog has to be reset to gracefully shut down.
+A full powerdown can be triggered via the kill signal.
+
+Required properties:
+
+- compatible:		Must contain: "lltc,ltc2952"
+- watchdog-gpios:	phandle + gpio-specifier for the GPIO connected to the
+			chip's watchdog line
+- kill-gpios:		phandle + gpio-specifier for the GPIO connected to the
+			chip's kill line
+
+Optional properties:
+- trigger-gpios:	phandle + gpio-specifier for the GPIO connected to the
+			chip's trigger line. If this property is not set, the
+			trigger function is ignored and the chip is kept alive
+			until an explicit kill signal is received
+
+Example:
+
+ltc2952 {
+	compatible = "lltc,ltc2952";
+
+	trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+	watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	kill-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+};
diff --git a/Bindings/power/reset/st-reset.txt b/Bindings/power/reset/st-reset.txt
new file mode 100644
index 000000000000..809af54f02f3
--- /dev/null
+++ b/Bindings/power/reset/st-reset.txt
@@ -0,0 +1,11 @@
+*Device-Tree bindings for ST SW reset functionality
+
+Required properties:
+- compatible: should be "st,<chip>-restart".
+- st,syscfg: should be a phandle of the syscfg node.
+
+Example node:
+	restart {
+		compatible = "st,stih416-restart";
+		st,syscfg = <&syscfg_sbc>;
+	};
diff --git a/Bindings/power/reset/syscon-reboot.txt b/Bindings/power/reset/syscon-reboot.txt
new file mode 100644
index 000000000000..11906316b43d
--- /dev/null
+++ b/Bindings/power/reset/syscon-reboot.txt
@@ -0,0 +1,23 @@
+Generic SYSCON mapped register reset driver
+
+This is a generic reset driver using syscon to map the reset register.
+The reset is generally performed with a write to the reset register
+defined by the register map pointed by syscon reference plus the offset
+with the mask defined in the reboot node.
+
+Required properties:
+- compatible: should contain "syscon-reboot"
+- regmap: this is phandle to the register map node
+- offset: offset in the register map for the reboot register (in bytes)
+- mask: the reset value written to the reboot register (32 bit access)
+
+Default will be little endian mode, 32 bit access only.
+
+Examples:
+
+	reboot {
+	   compatible = "syscon-reboot";
+	   regmap = <&regmapnode>;
+	   offset = <0x0>;
+	   mask = <0x1>;
+	};
diff --git a/Bindings/power/rockchip-io-domain.txt b/Bindings/power/rockchip-io-domain.txt
new file mode 100644
index 000000000000..8b70db103ca7
--- /dev/null
+++ b/Bindings/power/rockchip-io-domain.txt
@@ -0,0 +1,83 @@
+Rockchip SRAM for IO Voltage Domains:
+-------------------------------------
+
+IO domain voltages on some Rockchip SoCs are variable but need to be
+kept in sync between the regulators and the SoC using a special
+register.
+
+A specific example using rk3288:
+- If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
+  bit 7 of GRF_IO_VSEL needs to be 0.  If the regulator hooked up to
+  that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
+
+Said another way, this driver simply handles keeping bits in the SoC's
+general register file (GRF) in sync with the actual value of a voltage
+hooked up to the pins.
+
+Note that this driver specifically doesn't include:
+- any logic for deciding what voltage we should set regulators to
+- any logic for deciding whether regulators (or internal SoC blocks)
+  should have power or not have power
+
+If there were some other software that had the smarts of making
+decisions about regulators, it would work in conjunction with this
+driver.  When that other software adjusted a regulator's voltage then
+this driver would handle telling the SoC about it.  A good example is
+vqmmc for SD.  In that case the dw_mmc driver simply is told about a
+regulator.  It changes the regulator between 3.3V and 1.8V at the
+right time.  This driver notices the change and makes sure that the
+SoC is on the same page.
+
+
+Required properties:
+- compatible: should be one of:
+  - "rockchip,rk3188-io-voltage-domain" for rk3188
+  - "rockchip,rk3288-io-voltage-domain" for rk3288
+- rockchip,grf: phandle to the syscon managing the "general register files"
+
+
+You specify supplies using the standard regulator bindings by including
+a phandle the relevant regulator.  All specified supplies must be able
+to report their voltage.  The IO Voltage Domain for any non-specified
+supplies will be not be touched.
+
+Possible supplies for rk3188:
+- ap0-supply:    The supply connected to AP0_VCC.
+- ap1-supply:    The supply connected to AP1_VCC.
+- cif-supply:    The supply connected to CIF_VCC.
+- flash-supply:  The supply connected to FLASH_VCC.
+- lcdc0-supply:  The supply connected to LCD0_VCC.
+- lcdc1-supply:  The supply connected to LCD1_VCC.
+- vccio0-supply: The supply connected to VCCIO0.
+- vccio1-supply: The supply connected to VCCIO1.
+                 Sometimes also labeled VCCIO1 and VCCIO2.
+
+Possible supplies for rk3288:
+- audio-supply:  The supply connected to APIO4_VDD.
+- bb-supply:     The supply connected to APIO5_VDD.
+- dvp-supply:    The supply connected to DVPIO_VDD.
+- flash0-supply: The supply connected to FLASH0_VDD.  Typically for eMMC
+- flash1-supply: The supply connected to FLASH1_VDD.  Also known as SDIO1.
+- gpio30-supply: The supply connected to APIO1_VDD.
+- gpio1830       The supply connected to APIO2_VDD.
+- lcdc-supply:   The supply connected to LCDC_VDD.
+- sdcard-supply: The supply connected to SDMMC0_VDD.
+- wifi-supply:   The supply connected to APIO3_VDD.  Also known as SDIO0.
+
+
+Example:
+
+	io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		audio-supply = <&vcc18_codec>;
+		bb-supply = <&vcc33_io>;
+		dvp-supply = <&vcc_18>;
+		flash0-supply = <&vcc18_flashio>;
+		gpio1830-supply = <&vcc33_io>;
+		gpio30-supply = <&vcc33_pmuio>;
+		lcdc-supply = <&vcc33_lcd>;
+		sdcard-supply = <&vccio_sd>;
+		wifi-supply = <&vcc18_wl>;
+	};
diff --git a/Bindings/power_supply/charger-manager.txt b/Bindings/power_supply/charger-manager.txt
index 2b33750e3db2..ec4fe9de3137 100644
--- a/Bindings/power_supply/charger-manager.txt
+++ b/Bindings/power_supply/charger-manager.txt
@@ -24,7 +24,7 @@ Optional properties :
  - cm-thermal-zone : name of external thermometer's thermal zone
  - cm-battery-* : threshold battery temperature for charging
 	-cold : critical cold temperature of battery for charging
-	-cold-in-minus : flag that cold temerature is in minus degree
+	-cold-in-minus : flag that cold temperature is in minus degrees
 	-hot : critical hot temperature of battery for charging
 	-temp-diff : temperature difference to allow recharging
  - cm-dis/charging-max = limits of charging duration
diff --git a/Bindings/power_supply/gpio-charger.txt b/Bindings/power_supply/gpio-charger.txt
new file mode 100644
index 000000000000..adbb5dc5b6e9
--- /dev/null
+++ b/Bindings/power_supply/gpio-charger.txt
@@ -0,0 +1,27 @@
+gpio-charger
+
+Required properties :
+ - compatible : "gpio-charger"
+ - gpios : GPIO indicating the charger presence.
+   See GPIO binding in bindings/gpio/gpio.txt .
+ - charger-type : power supply type, one of
+     unknown
+     battery
+     ups
+     mains
+     usb-sdp (USB standard downstream port)
+     usb-dcp (USB dedicated charging port)
+     usb-cdp (USB charging downstream port)
+     usb-aca (USB accessory charger adapter)
+
+Example:
+
+	usb_charger: charger {
+		compatible = "gpio-charger";
+		charger-type = "usb-sdp";
+		gpios = <&gpf0 2 0 0 0>;
+	}
+
+	battery {
+		power-supplies = <&usb_charger>;
+	};
diff --git a/Bindings/power_supply/imx-snvs-poweroff.txt b/Bindings/power_supply/imx-snvs-poweroff.txt
new file mode 100644
index 000000000000..dc7c9bad63ea
--- /dev/null
+++ b/Bindings/power_supply/imx-snvs-poweroff.txt
@@ -0,0 +1,23 @@
+i.mx6 Poweroff Driver
+
+SNVS_LPCR in SNVS module can power off the whole system by pull
+PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC.
+If you don't want to use PMIC_ON_REQ as power on/off control,
+please set status='disabled' to disable this driver.
+
+Required Properties:
+-compatible: "fsl,sec-v4.0-poweroff"
+-reg: Specifies the physical address of the SNVS_LPCR register
+
+Example:
+	snvs@020cc000 {
+		compatible = "fsl,sec-v4.0-mon", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x020cc000 0x4000>;
+		.....
+		snvs_poweroff: snvs-poweroff@38 {
+			compatible = "fsl,sec-v4.0-poweroff";
+			reg = <0x38 0x4>;
+		};
+	}
diff --git a/Bindings/powerpc/fsl/fman.txt b/Bindings/powerpc/fsl/fman.txt
new file mode 100644
index 000000000000..edda55f74004
--- /dev/null
+++ b/Bindings/powerpc/fsl/fman.txt
@@ -0,0 +1,604 @@
+=============================================================================
+Freescale Frame Manager Device Bindings
+
+CONTENTS
+  - FMan Node
+  - FMan Port Node
+  - FMan MURAM Node
+  - FMan dTSEC/XGEC/mEMAC Node
+  - FMan IEEE 1588 Node
+  - FMan MDIO Node
+  - Example
+
+=============================================================================
+FMan Node
+
+DESCRIPTION
+
+Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
+etc.) the FMan node will have child nodes for each of them.
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: Must include "fsl,fman"
+		FMan version can be determined via FM_IP_REV_1 register in the
+		FMan block. The offset is 0xc4 from the beginning of the
+		Frame Processing Manager memory map (0xc3000 from the
+		beginning of the FMan node).
+
+- cell-index
+		Usage: required
+		Value type: <u32>
+		Definition: Specifies the index of the FMan unit.
+
+		The cell-index value may be used by the SoC, to identify the
+		FMan unit in the SoC memory map. In the table bellow,
+		there's a description of the cell-index use in each SoC:
+
+		- P1023:
+		register[bit]			FMan unit	cell-index
+		============================================================
+		DEVDISR[1]			1		0
+
+		- P2041, P3041, P4080 P5020, P5040:
+		register[bit]			FMan unit	cell-index
+		============================================================
+		DCFG_DEVDISR2[6]		1		0
+		DCFG_DEVDISR2[14]		2		1
+			(Second FM available only in P4080 and P5040)
+
+		- B4860, T1040, T2080, T4240:
+		register[bit]			FMan unit	cell-index
+		============================================================
+		DCFG_CCSR_DEVDISR2[24]		1		0
+		DCFG_CCSR_DEVDISR2[25]		2		1
+			(Second FM available only in T4240)
+
+		DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+		the specific SoC "Device Configuration/Pin Control" Memory
+		Map.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property. Specifies the offset of the
+		following configuration registers:
+		- BMI configuration registers.
+		- QMI configuration registers.
+		- DMA configuration registers.
+		- FPM configuration registers.
+		- FMan controller configuration registers.
+
+- ranges
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+
+- clocks
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: phandle for the fman input clock.
+
+- clock-names
+		usage: required
+		Value type: <stringlist>
+		Definition: "fmanclk" for the fman input clock.
+
+- interrupts
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A pair of IRQs are specified in this property.
+		The first element is associated with the event interrupts and
+		the second element is associated with the error interrupts.
+
+- fsl,qman-channel-range
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: Specifies the range of the available dedicated
+		channels in the FMan. The first cell specifies the beginning
+		of the range and the second cell specifies the number of
+		channels.
+		Further information available at:
+		"Work Queue (WQ) Channel Assignments in the QMan" section
+		in DPAA Reference Manual.
+
+- fsl,qman
+- fsl,bman
+		Usage: required
+		Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt
+
+=============================================================================
+FMan MURAM Node
+
+DESCRIPTION
+
+FMan Internal memory - shared between all the FMan modules.
+It contains data structures that are common and written to or read by
+the modules.
+FMan internal memory is split into the following parts:
+	Packet buffering (Tx/Rx FIFOs)
+	Frames internal context
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: Must include "fsl,fman-muram"
+
+- ranges
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+		Specifies the multi-user memory offset and the size within
+		the FMan.
+
+EXAMPLE
+
+muram@0 {
+	compatible = "fsl,fman-muram";
+	ranges = <0 0x000000 0x28000>;
+};
+
+=============================================================================
+FMan Port Node
+
+DESCRIPTION
+
+The Frame Manager (FMan) supports several types of hardware ports:
+	Ethernet receiver (RX)
+	Ethernet transmitter (TX)
+	Offline/Host command (O/H)
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: A standard property.
+		Must include one of the following:
+			- "fsl,fman-v2-port-oh" for FManV2 OH ports
+			- "fsl,fman-v2-port-rx" for FManV2 RX ports
+			- "fsl,fman-v2-port-tx" for FManV2 TX ports
+			- "fsl,fman-v3-port-oh" for FManV3 OH ports
+			- "fsl,fman-v3-port-rx" for FManV3 RX ports
+			- "fsl,fman-v3-port-tx" for FManV3 TX ports
+
+- cell-index
+		Usage: required
+		Value type: <u32>
+		Definition: Specifies the hardware port id.
+		Each hardware port on the FMan has its own hardware PortID.
+		Super set of all hardware Port IDs available at FMan Reference
+		Manual under "FMan Hardware Ports in Freescale Devices" table.
+
+		Each hardware port is assigned a 4KB, port-specific page in
+		the FMan hardware port memory region (which is part of the
+		FMan memory map). The first 4 KB in the FMan hardware ports
+		memory region is used for what are called common registers.
+		The subsequent 63 4KB pages are allocated to the hardware
+		ports.
+		The page of a specific port is determined by the cell-index.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: There is one reg region describing the port
+		configuration registers.
+
+EXAMPLE
+
+port@a8000 {
+	cell-index = <0x28>;
+	compatible = "fsl,fman-v2-port-tx";
+	reg = <0xa8000 0x1000>;
+};
+
+port@88000 {
+	cell-index = <0x8>;
+	compatible = "fsl,fman-v2-port-rx";
+	reg = <0x88000 0x1000>;
+};
+
+port@81000 {
+	cell-index = <0x1>;
+	compatible = "fsl,fman-v2-port-oh";
+	reg = <0x81000 0x1000>;
+};
+
+=============================================================================
+FMan dTSEC/XGEC/mEMAC Node
+
+DESCRIPTION
+
+mEMAC/dTSEC/XGEC are the Ethernet network interfaces
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: A standard property.
+		Must include one of the following:
+		- "fsl,fman-dtsec" for dTSEC MAC
+		- "fsl,fman-xgec" for XGEC MAC
+		- "fsl,fman-memac for mEMAC MAC
+
+- cell-index
+		Usage: required
+		Value type: <u32>
+		Definition: Specifies the MAC id.
+
+		The cell-index value may be used by the FMan or the SoC, to
+		identify the MAC unit in the FMan (or SoC) memory map.
+		In the tables bellow there's a description of the cell-index
+		use, there are two tables, one describes the use of cell-index
+		by the FMan, the second describes the use by the SoC:
+
+		1. FMan Registers
+
+		FManV2:
+		register[bit]		MAC		cell-index
+		============================================================
+		FM_EPI[16]		XGEC		8
+		FM_EPI[16+n]		dTSECn		n-1
+		FM_NPI[11+n]		dTSECn		n-1
+			n = 1,..,5
+
+		FManV3:
+		register[bit]		MAC		cell-index
+		============================================================
+		FM_EPI[16+n]		mEMACn		n-1
+		FM_EPI[25]		mEMAC10		9
+
+		FM_NPI[11+n]		mEMACn		n-1
+		FM_NPI[10]		mEMAC10		9
+		FM_NPI[11]		mEMAC9		8
+			n = 1,..8
+
+		FM_EPI and FM_NPI are located in the FMan memory map.
+
+		2. SoC registers:
+
+		- P2041, P3041, P4080 P5020, P5040:
+		register[bit]		FMan		MAC		cell
+					Unit				index
+		============================================================
+		DCFG_DEVDISR2[7]	1		XGEC		8
+		DCFG_DEVDISR2[7+n]	1		dTSECn		n-1
+		DCFG_DEVDISR2[15]	2		XGEC		8
+		DCFG_DEVDISR2[15+n]	2		dTSECn		n-1
+			n = 1,..5
+
+		- T1040, T2080, T4240, B4860:
+		register[bit]			FMan	MAC		cell
+						Unit			index
+		============================================================
+		DCFG_CCSR_DEVDISR2[n-1]		1	mEMACn		n-1
+		DCFG_CCSR_DEVDISR2[11+n]	2	mEMACn		n-1
+			n = 1,..6,9,10
+
+		EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+		the specific SoC "Device Configuration/Pin Control" Memory
+		Map.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+
+- fsl,fman-ports
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: An array of two phandles - the first references is
+		the FMan RX port and the second is the TX port used by this
+		MAC.
+
+- ptp-timer
+		Usage required
+		Value type: <phandle>
+		Definition: A phandle for 1EEE1588 timer.
+
+EXAMPLE
+
+fman1_tx28: port@a8000 {
+	cell-index = <0x28>;
+	compatible = "fsl,fman-v2-port-tx";
+	reg = <0xa8000 0x1000>;
+};
+
+fman1_rx8: port@88000 {
+	cell-index = <0x8>;
+	compatible = "fsl,fman-v2-port-rx";
+	reg = <0x88000 0x1000>;
+};
+
+ptp-timer: ptp_timer@fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0xfe000 0x1000>;
+};
+
+ethernet@e0000 {
+	compatible = "fsl,fman-dtsec";
+	cell-index = <0>;
+	reg = <0xe0000 0x1000>;
+	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
+	ptp-timer = <&ptp-timer>;
+};
+
+============================================================================
+FMan IEEE 1588 Node
+
+DESCRIPTION
+
+The FMan interface to support IEEE 1588
+
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: A standard property.
+		Must include "fsl,fman-ptp-timer".
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+
+EXAMPLE
+
+ptp-timer@fe000 {
+	compatible = "fsl,fman-ptp-timer";
+	reg = <0xfe000 0x1000>;
+};
+
+=============================================================================
+FMan MDIO Node
+
+DESCRIPTION
+
+The MDIO is a bus to which the PHY devices are connected.
+
+PROPERTIES
+
+- compatible
+		Usage: required
+		Value type: <stringlist>
+		Definition: A standard property.
+		Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
+		Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
+		Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
+		FMan v3.
+
+- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property.
+
+- bus-frequency
+		Usage: optional
+		Value type: <u32>
+		Definition: Specifies the external MDIO bus clock speed to
+		be used, if different from the standard 2.5 MHz.
+		This may be due to the standard speed being unsupported (e.g.
+		due to a hardware problem), or to advertise that all relevant
+		components in the system support a faster speed.
+
+- interrupts
+		Usage: required for external MDIO
+		Value type: <prop-encoded-array>
+		Definition: Event interrupt of external MDIO controller.
+
+- fsl,fman-internal-mdio
+		Usage: required for internal MDIO
+		Value type: boolean
+		Definition: Fman has internal MDIO for internal PCS(Physical
+		Coding Sublayer) PHYs and external MDIO for external PHYs.
+		The settings and programming routines for internal/external
+		MDIO are different. Must be included for internal MDIO.
+
+EXAMPLE
+
+Example for FMan v2 external MDIO:
+
+mdio@f1000 {
+	compatible = "fsl,fman-xmdio";
+	reg = <0xf1000 0x1000>;
+	interrupts = <101 2 0 0>;
+};
+
+Example for FMan v3 internal MDIO:
+
+mdio@f1000 {
+	compatible = "fsl,fman-memac-mdio";
+	reg = <0xf1000 0x1000>;
+	fsl,fman-internal-mdio;
+};
+
+=============================================================================
+Example
+
+fman@400000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	cell-index = <1>;
+	compatible = "fsl,fman"
+	ranges = <0 0x400000 0x100000>;
+	reg = <0x400000 0x100000>;
+	clocks = <&fman_clk>;
+	clock-names = "fmanclk";
+	interrupts = <
+		96 2 0 0
+		16 2 1 1>;
+	fsl,qman-channel-range = <0x40 0xc>;
+
+	muram@0 {
+		compatible = "fsl,fman-muram";
+		reg = <0x0 0x28000>;
+	};
+
+	port@81000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x81000 0x1000>;
+	};
+
+	port@82000 {
+		cell-index = <2>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x82000 0x1000>;
+	};
+
+	port@83000 {
+		cell-index = <3>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x83000 0x1000>;
+	};
+
+	port@84000 {
+		cell-index = <4>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x84000 0x1000>;
+	};
+
+	port@85000 {
+		cell-index = <5>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x85000 0x1000>;
+	};
+
+	port@86000 {
+		cell-index = <6>;
+		compatible = "fsl,fman-v2-port-oh";
+		reg = <0x86000 0x1000>;
+	};
+
+	fman1_rx_0x8: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x88000 0x1000>;
+	};
+
+	fman1_rx_0x9: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x89000 0x1000>;
+	};
+
+	fman1_rx_0xa: port@8a000 {
+		cell-index = <0xa>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8a000 0x1000>;
+	};
+
+	fman1_rx_0xb: port@8b000 {
+		cell-index = <0xb>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8b000 0x1000>;
+	};
+
+	fman1_rx_0xc: port@8c000 {
+		cell-index = <0xc>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x8c000 0x1000>;
+	};
+
+	fman1_rx_0x10: port@90000 {
+		cell-index = <0x10>;
+		compatible = "fsl,fman-v2-port-rx";
+		reg = <0x90000 0x1000>;
+	};
+
+	fman1_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa8000 0x1000>;
+	};
+
+	fman1_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xa9000 0x1000>;
+	};
+
+	fman1_tx_0x2a: port@aa000 {
+		cell-index = <0x2a>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xaa000 0x1000>;
+	};
+
+	fman1_tx_0x2b: port@ab000 {
+		cell-index = <0x2b>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xab000 0x1000>;
+	};
+
+	fman1_tx_0x2c: port@ac0000 {
+		cell-index = <0x2c>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xac000 0x1000>;
+	};
+
+	fman1_tx_0x30: port@b0000 {
+		cell-index = <0x30>;
+		compatible = "fsl,fman-v2-port-tx";
+		reg = <0xb0000 0x1000>;
+	};
+
+	ethernet@e0000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <0>;
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
+	};
+
+	ethernet@e2000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <1>;
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
+	};
+
+	ethernet@e4000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <2>;
+		reg = <0xe4000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
+	};
+
+	ethernet@e6000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <3>;
+		reg = <0xe6000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
+	};
+
+	ethernet@e8000 {
+		compatible = "fsl,fman-dtsec";
+		cell-index = <4>;
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
+
+	ethernet@f0000 {
+		cell-index = <8>;
+		compatible = "fsl,fman-xgec";
+		reg = <0xf0000 0x1000>;
+		fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
+	};
+
+	ptp-timer@fe000 {
+		compatible = "fsl,fman-ptp-timer";
+		reg = <0xfe000 0x1000>;
+	};
+
+	mdio@f1000 {
+		compatible = "fsl,fman-xmdio";
+		reg = <0xf1000 0x1000>;
+		interrupts = <101 2 0 0>;
+	};
+};
diff --git a/Bindings/powerpc/fsl/lbc.txt b/Bindings/powerpc/fsl/lbc.txt
index 3300fec501c5..1c80fcedebb5 100644
--- a/Bindings/powerpc/fsl/lbc.txt
+++ b/Bindings/powerpc/fsl/lbc.txt
@@ -16,20 +16,28 @@ Example:
 			   "fsl,pq2-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		reg = <f0010100 40>;
+		reg = <0xf0010100 0x40>;
 
-		ranges = <0 0 fe000000 02000000
-			  1 0 f4500000 00008000>;
+		ranges = <0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0xf4500000 0x00008000
+			  0x2 0x0 0xfd810000 0x00010000>;
 
 		flash@0,0 {
 			compatible = "jedec-flash";
-			reg = <0 0 2000000>;
+			reg = <0x0 0x0 0x2000000>;
 			bank-width = <4>;
 			device-width = <1>;
 		};
 
 		board-control@1,0 {
-			reg = <1 0 20>;
+			reg = <0x1 0x0 0x20>;
 			compatible = "fsl,mpc8272ads-bcsr";
 		};
+
+		simple-periph@2,0 {
+			compatible = "fsl,elbc-gpcm-uio";
+			reg = <0x2 0x0 0x10000>;
+			elbc-gpcm-br = <0xfd810800>;
+			elbc-gpcm-or = <0xffff09f7>;
+		};
 	};
diff --git a/Bindings/pwm/atmel-hlcdc-pwm.txt b/Bindings/pwm/atmel-hlcdc-pwm.txt
new file mode 100644
index 000000000000..cfda0d57d302
--- /dev/null
+++ b/Bindings/pwm/atmel-hlcdc-pwm.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver
+
+The Atmel HLCDC PWM is subdevice of the HLCDC MFD device.
+See ../mfd/atmel-hlcdc.txt for more details.
+
+Required properties:
+ - compatible: value should be one of the following:
+   "atmel,hlcdc-pwm"
+ - pinctr-names: the pin control state names. Should contain "default".
+ - pinctrl-0: should contain the pinctrl states described by pinctrl
+   default.
+ - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells
+   bindings defined in pwm.txt in this directory.
+
+Example:
+
+	hlcdc: hlcdc@f0030000 {
+		compatible = "atmel,sama5d3-hlcdc";
+		reg = <0xf0030000 0x2000>;
+		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+		clock-names = "periph_clk","sys_clk", "slow_clk";
+
+		hlcdc_pwm: hlcdc-pwm {
+			compatible = "atmel,hlcdc-pwm";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_pwm>;
+			#pwm-cells = <3>;
+		};
+	};
diff --git a/Bindings/pwm/img-pwm.txt b/Bindings/pwm/img-pwm.txt
new file mode 100644
index 000000000000..fade5f26fcac
--- /dev/null
+++ b/Bindings/pwm/img-pwm.txt
@@ -0,0 +1,24 @@
+*Imagination Technologies PWM DAC driver
+
+Required properties:
+  - compatible: Should be "img,pistachio-pwm"
+  - reg: Should contain physical base address and length of pwm registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+	See ../clock/clock-bindings.txt for details.
+  - clock-names: Must include the following entries.
+    - pwm: PWM operating clock.
+    - sys: PWM system interface clock.
+  - #pwm-cells: Should be 2. See pwm.txt in this directory for the
+	description of the cells format.
+  - img,cr-periph: Must contain a phandle to the peripheral control
+	syscon node which contains PWM control registers.
+
+Example:
+	pwm: pwm@18101300 {
+		compatible = "img,pistachio-pwm";
+		reg = <0x18101300 0x100>;
+		clocks = <&pwm_clk>, <&system_clk>;
+		clock-names = "pwm", "sys";
+		#pwm-cells = <2>;
+		img,cr-periph = <&cr_periph>;
+	};
diff --git a/Bindings/pwm/nvidia,tegra20-pwm.txt b/Bindings/pwm/nvidia,tegra20-pwm.txt
index c7ea9d4a988b..c52f03b5032f 100644
--- a/Bindings/pwm/nvidia,tegra20-pwm.txt
+++ b/Bindings/pwm/nvidia,tegra20-pwm.txt
@@ -1,9 +1,10 @@
 Tegra SoC PWFM controller
 
 Required properties:
-- compatible: should be one of:
-  - "nvidia,tegra20-pwm"
-  - "nvidia,tegra30-pwm"
+- compatible: For Tegra20, must contain "nvidia,tegra20-pwm".  For Tegra30,
+  must contain "nvidia,tegra30-pwm".  Otherwise, must contain
+  "nvidia,<chip>-pwm", plus one of the above, where <chip> is tegra114,
+  tegra124, tegra132, or tegra210.
 - reg: physical base address and length of the controller's registers
 - #pwm-cells: should be 2. See pwm.txt in this directory for a description of
   the cells format.
diff --git a/Bindings/pwm/pwm-bcm2835.txt b/Bindings/pwm/pwm-bcm2835.txt
new file mode 100644
index 000000000000..fb6fb31bc4c4
--- /dev/null
+++ b/Bindings/pwm/pwm-bcm2835.txt
@@ -0,0 +1,30 @@
+BCM2835 PWM controller (Raspberry Pi controller)
+
+Required properties:
+- compatible: should be "brcm,bcm2835-pwm"
+- reg: physical base address and length of the controller's registers
+- clock: This clock defines the base clock frequency of the PWM hardware
+  system, the period and the duty_cycle of the PWM signal is a multiple of
+  the base period.
+- #pwm-cells: Should be 2. See pwm.txt in this directory for a description of
+  the cells format.
+
+Examples:
+
+pwm@2020c000 {
+	compatible = "brcm,bcm2835-pwm";
+	reg = <0x2020c000 0x28>;
+	clocks = <&clk_pwm>;
+	#pwm-cells = <2>;
+};
+
+clocks {
+	....
+		clk_pwm: pwm {
+			compatible = "fixed-clock";
+			reg = <3>;
+			#clock-cells = <0>;
+			clock-frequency = <9200000>;
+		};
+	....
+};
diff --git a/Bindings/pwm/pwm-fsl-ftm.txt b/Bindings/pwm/pwm-fsl-ftm.txt
index 0bda229a6171..3899d6a557c1 100644
--- a/Bindings/pwm/pwm-fsl-ftm.txt
+++ b/Bindings/pwm/pwm-fsl-ftm.txt
@@ -1,5 +1,20 @@
 Freescale FlexTimer Module (FTM) PWM controller
 
+The same FTM PWM device can have a different endianness on different SoCs. The
+device tree provides a property to describing this so that an operating system
+device driver can handle all variants of the device. Refer to the table below
+for the endianness of the FTM PWM block as integrated into the existing SoCs:
+
+	SoC     | FTM-PWM endianness
+	--------+-------------------
+	Vybrid  | LE
+	LS1     | BE
+	LS2     | LE
+
+Please see ../regmap/regmap.txt for more detail about how to specify endian
+modes in device tree.
+
+
 Required properties:
 - compatible: Should be "fsl,vf610-ftm-pwm".
 - reg: Physical base address and length of the controller's registers
@@ -16,7 +31,8 @@ Required properties:
 - pinctrl-names: Must contain a "default" entry.
 - pinctrl-NNN: One property must exist for each entry in pinctrl-names.
   See pinctrl/pinctrl-bindings.txt for details of the property values.
-
+- big-endian: Boolean property, required if the FTM PWM registers use a big-
+  endian rather than little-endian layout.
 
 Example:
 
@@ -32,4 +48,5 @@ pwm0: pwm@40038000 {
 			<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pwm0_1>;
+		big-endian;
 };
diff --git a/Bindings/pwm/pwm-rockchip.txt b/Bindings/pwm/pwm-rockchip.txt
index d47d15a6a298..b8be3d09ee26 100644
--- a/Bindings/pwm/pwm-rockchip.txt
+++ b/Bindings/pwm/pwm-rockchip.txt
@@ -7,8 +7,8 @@ Required properties:
    "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC
  - reg: physical base address and length of the controller's registers
  - clocks: phandle and clock specifier of the PWM reference clock
- - #pwm-cells: should be 2. See pwm.txt in this directory for a
-   description of the cell format.
+ - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.txt in this directory
+   for a description of the cell format.
 
 Example:
 
diff --git a/Bindings/pwm/pwm-sun4i.txt b/Bindings/pwm/pwm-sun4i.txt
new file mode 100644
index 000000000000..ae0273e19506
--- /dev/null
+++ b/Bindings/pwm/pwm-sun4i.txt
@@ -0,0 +1,20 @@
+Allwinner sun4i and sun7i SoC PWM controller
+
+Required properties:
+  - compatible: should be one of:
+    - "allwinner,sun4i-a10-pwm"
+    - "allwinner,sun7i-a20-pwm"
+  - reg: physical base address and length of the controller's registers
+  - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
+    the cells format.
+  - clocks: From common clock binding, handle to the parent clock.
+
+Example:
+
+	pwm: pwm@01c20e00 {
+		compatible = "allwinner,sun7i-a20-pwm";
+		reg = <0x01c20e00 0xc>;
+		clocks = <&osc24M>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
diff --git a/Bindings/regmap/regmap.txt b/Bindings/regmap/regmap.txt
new file mode 100644
index 000000000000..b494f8b8ef72
--- /dev/null
+++ b/Bindings/regmap/regmap.txt
@@ -0,0 +1,47 @@
+Device-Tree binding for regmap
+
+The endianness mode of CPU & Device scenarios:
+Index     Device     Endianness properties
+---------------------------------------------------
+1         BE         'big-endian'
+2         LE         'little-endian'
+
+For one device driver, which will run in different scenarios above
+on different SoCs using the devicetree, we need one way to simplify
+this.
+
+Required properties:
+- {big,little}-endian: these are boolean properties, if absent
+  meaning that the CPU and the Device are in the same endianness mode,
+  these properties are for register values and all the buffers only.
+
+Examples:
+Scenario 1 : CPU in LE mode & device in LE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+};
+
+Scenario 2 : CPU in LE mode & device in BE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      big-endian;
+};
+
+Scenario 3 : CPU in BE mode & device in BE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+};
+
+Scenario 4 : CPU in BE mode & device in LE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      little-endian;
+};
diff --git a/Bindings/regulator/act8865-regulator.txt b/Bindings/regulator/act8865-regulator.txt
index 865614b34d6f..dad6358074ac 100644
--- a/Bindings/regulator/act8865-regulator.txt
+++ b/Bindings/regulator/act8865-regulator.txt
@@ -5,6 +5,10 @@ Required properties:
 - compatible: "active-semi,act8846" or "active-semi,act8865"
 - reg: I2C slave address
 
+Optional properties:
+- system-power-controller: Telling whether or not this pmic is controlling
+  the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
+
 Any standard regulator properties can be used to configure the single regulator.
 
 The valid names for regulators are:
diff --git a/Bindings/regulator/da9210.txt b/Bindings/regulator/da9210.txt
index f120f229d67d..3297c53cb915 100644
--- a/Bindings/regulator/da9210.txt
+++ b/Bindings/regulator/da9210.txt
@@ -2,7 +2,7 @@
 
 Required properties:
 
-- compatible:	must be "diasemi,da9210"
+- compatible:	must be "dlg,da9210"
 - reg:		the i2c slave address of the regulator. It should be 0x68.
 
 Any standard regulator properties can be used to configure the single da9210
@@ -11,7 +11,7 @@ DCDC.
 Example:
 
 	da9210@68 {
-		compatible = "diasemi,da9210";
+		compatible = "dlg,da9210";
 		reg = <0x68>;
 
 		regulator-min-microvolt = <900000>;
diff --git a/Bindings/regulator/da9211.txt b/Bindings/regulator/da9211.txt
new file mode 100644
index 000000000000..eb618907c7de
--- /dev/null
+++ b/Bindings/regulator/da9211.txt
@@ -0,0 +1,68 @@
+* Dialog Semiconductor DA9211/DA9213 Voltage Regulator
+
+Required properties:
+- compatible: "dlg,da9211" or "dlg,da9213".
+- reg: I2C slave address, usually 0x68.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  BUCKA and BUCKB.
+
+Optional properties:
+- enable-gpios: platform gpio for control of BUCKA/BUCKB.
+- Any optional property defined in regulator.txt
+
+Example 1) DA9211
+
+	pmic: da9211@68 {
+		compatible = "dlg,da9211";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <2000000>;
+				regulator-max-microamp 	= <5000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <2000000>;
+				regulator-max-microamp 	= <5000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
+
+Example 2) DA9213
+	pmic: da9213@68 {
+		compatible = "dlg,da9213";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
diff --git a/Bindings/regulator/fan53555.txt b/Bindings/regulator/fan53555.txt
new file mode 100644
index 000000000000..54a3f2c80e3a
--- /dev/null
+++ b/Bindings/regulator/fan53555.txt
@@ -0,0 +1,23 @@
+Binding for Fairchild FAN53555 regulators
+
+Required properties:
+  - compatible: one of "fcs,fan53555", "silergy,syr827", "silergy,syr828"
+  - reg: I2C address
+
+Optional properties:
+  - fcs,suspend-voltage-selector: declare which of the two available
+		voltage selector registers should be used for the suspend
+		voltage. The other one is used for the runtime voltage setting
+		Possible values are either <0> or <1>
+  - vin-supply: regulator supplying the vin pin
+
+Example:
+
+	regulator@40 {
+		compatible = "fcs,fan53555";
+		regulator-name = "fan53555";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&parent_reg>;
+		fcs,suspend-voltage-selector = <1>;
+	};
diff --git a/Bindings/regulator/isl9305.txt b/Bindings/regulator/isl9305.txt
new file mode 100644
index 000000000000..d6e7c9ec9413
--- /dev/null
+++ b/Bindings/regulator/isl9305.txt
@@ -0,0 +1,36 @@
+Intersil ISL9305/ISL9305H voltage regulator
+
+Required properties:
+
+- compatible: "isil,isl9305" or "isil,isl9305h"
+- reg: I2C slave address, usually 0x68.
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values being "dcd1", "dcd2", "ldo1" and "ldo2". The content of each sub-node
+  is defined by the standard binding for regulators; see regulator.txt.
+- VINDCD1-supply: A phandle to a regulator node supplying VINDCD1.
+  VINDCD2-supply: A phandle to a regulator node supplying VINDCD2.
+  VINLDO1-supply: A phandle to a regulator node supplying VINLDO1.
+  VINLDO2-supply: A phandle to a regulator node supplying VINLDO2.
+
+Optional properties:
+- Per-regulator optional properties are defined in regulator.txt
+
+Example
+
+	pmic: isl9305@68 {
+		compatible = "isil,isl9305";
+		reg = <0x68>;
+
+		VINDCD1-supply = <&system_power>;
+		VINDCD2-supply = <&system_power>;
+		VINLDO1-supply = <&system_power>;
+		VINLDO2-supply = <&system_power>;
+
+		regulators {
+			dcd1 {
+			        regulator-name = "VDD_DSP";
+				regulator-always-on;
+                        };
+		};
+	};
diff --git a/Bindings/regulator/max1586-regulator.txt b/Bindings/regulator/max1586-regulator.txt
new file mode 100644
index 000000000000..c050c1744cb8
--- /dev/null
+++ b/Bindings/regulator/max1586-regulator.txt
@@ -0,0 +1,28 @@
+Maxim MAX1586 voltage regulator
+
+Required properties:
+- compatible: must be "maxim,max1586"
+- reg: I2C slave address, usually 0x14
+- v3-gain: integer specifying the V3 gain as per datasheet
+           (1 + R24/R25 + R24/185.5kOhm)
+- any required generic properties defined in regulator.txt
+
+Example:
+
+	i2c_master {
+		max1586@14 {
+			compatible = "maxim,max1586";
+			reg = <0x14>;
+			v3-gain = <1000000>;
+
+			regulators {
+				vcc_core: v3 {
+					regulator-name = "vcc_core";
+					regulator-compatible = "Output_V3";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1705000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
diff --git a/Bindings/regulator/max77802.txt b/Bindings/regulator/max77802.txt
new file mode 100644
index 000000000000..79e5476444f7
--- /dev/null
+++ b/Bindings/regulator/max77802.txt
@@ -0,0 +1,88 @@
+Binding for Maxim MAX77802 regulators
+
+This is a part of device tree bindings of MAX77802 multi-function device.
+More information can be found in bindings/mfd/max77802.txt file.
+
+The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO)
+regulators that can be controlled over I2C.
+
+Following properties should be present in main device node of the MFD chip.
+
+Optional node:
+- regulators : The regulators of max77802 have to be instantiated
+  under subnode named "regulators" using the following format.
+
+	regulator-name {
+		standard regulator constraints....
+	};
+	refer Documentation/devicetree/bindings/regulator/regulator.txt
+
+The regulator node name should be initialized with a string to get matched
+with their hardware counterparts as follow. The valid names are:
+
+	-LDOn 	:	for LDOs, where n can lie in ranges 1-15, 17-21, 23-30
+			and 32-35.
+			example: LDO1, LDO2, LDO35.
+	-BUCKn 	:	for BUCKs, where n can lie in range 1 to 10.
+			example: BUCK1, BUCK5, BUCK10.
+
+The max77802 regulator supports two different operating modes: Normal and Low
+Power Mode. Some regulators support the modes to be changed at startup or by
+the consumers during normal operation while others only support to change the
+mode during system suspend. The standard regulator suspend states binding can
+be used to configure the regulator operating mode.
+
+The regulators that support the standard "regulator-initial-mode" property,
+changing their mode during normal operation are: LDOs 1, 3, 20 and 21.
+
+The possible values for "regulator-initial-mode" and "regulator-mode" are:
+	1: Normal regulator voltage output mode.
+	3: Low Power which reduces the quiescent current down to only 1uA
+
+The list of valid modes are defined in the dt-bindings/clock/maxim,max77802.h
+header and can be included by device tree source files.
+
+The standard "regulator-mode" property can only be used for regulators that
+support changing their mode to Low Power Mode during suspend. These regulators
+are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
+been enabled for the given suspend state using "regulator-on-in-suspend" and
+has not been disabled for that state using "regulator-off-in-suspend".
+
+Example:
+
+	max77802@09 {
+		compatible = "maxim,max77802";
+		interrupt-parent = <&wakeup_eint>;
+		interrupts = <26 0>;
+		reg = <0x09>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-initial-mode = <MAX77802_OPMODE_LP>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+	};
diff --git a/Bindings/regulator/mt6397-regulator.txt b/Bindings/regulator/mt6397-regulator.txt
new file mode 100644
index 000000000000..a42b1d6e9863
--- /dev/null
+++ b/Bindings/regulator/mt6397-regulator.txt
@@ -0,0 +1,217 @@
+Mediatek MT6397 Regulator Driver
+
+Required properties:
+- compatible: "mediatek,mt6397-regulator"
+- mt6397regulator: List of regulators provided by this controller. It is named
+  according to its regulator type, buck_<name> and ldo_<name>.
+  The definition for each of these nodes is defined using the standard binding
+  for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+  buck_vpca15, buck_vpca7, buck_vsramca15, buck_vsramca7, buck_vcore, buck_vgpu,
+  buck_vdrm, buck_vio18
+LDO:
+  ldo_vtcxo, ldo_va28, ldo_vcama, ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch,
+  ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6,
+  ldo_vibr
+
+Example:
+	pmic {
+		compatible = "mediatek,mt6397";
+
+		mt6397regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-compatible = "buck_vpca15";
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <200>;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-compatible = "buck_vpca7";
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-compatible = "buck_vsramca15";
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-compatible = "buck_vsramca7";
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-compatible = "buck_vcore";
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-compatible = "buck_vgpu";
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-compatible = "buck_vdrm";
+				regulator-name = "vdrm";
+				regulator-min-microvolt = < 800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <500>;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-compatible = "buck_vio18";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2120000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <500>;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-compatible = "ldo_vtcxo";
+				regulator-name = "vtcxo";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <90>;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-compatible = "ldo_va28";
+				regulator-name = "va28";
+				/* fixed output 2.8 V */
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-compatible = "ldo_vcama";
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-compatible = "ldo_vio28";
+				regulator-name = "vio28";
+				/* fixed output 2.8 V */
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_usb_reg: ldo_vusb {
+				regulator-compatible = "ldo_vusb";
+				regulator-name = "vusb";
+				/* fixed output 3.3 V */
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-compatible = "ldo_vmc";
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-compatible = "ldo_vmch";
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-compatible = "ldo_vemc3v3";
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-compatible = "ldo_vgp1";
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1220000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				egulator-compatible = "ldo_vgp2";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-compatible = "ldo_vgp3";
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-compatible = "ldo_vgp4";
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-compatible = "ldo_vgp5";
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-compatible = "ldo_vgp6";
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-compatible = "ldo_vibr";
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+	};
diff --git a/Bindings/regulator/pfuze100.txt b/Bindings/regulator/pfuze100.txt
index 34ef5d16d0f1..9b40db88f637 100644
--- a/Bindings/regulator/pfuze100.txt
+++ b/Bindings/regulator/pfuze100.txt
@@ -1,7 +1,7 @@
 PFUZE100 family of regulators
 
 Required properties:
-- compatible: "fsl,pfuze100" or "fsl,pfuze200"
+- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
 - reg: I2C slave address
 
 Required child node:
@@ -14,6 +14,8 @@ Required child node:
   sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
   --PFUZE200
   sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6
+  --PFUZE3000
+  sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4
 
 Each regulator is defined using the standard binding for regulators.
 
@@ -205,3 +207,93 @@ Example 2: PFUZE200
 			};
 		};
 	};
+
+Example 3: PFUZE3000
+
+	pmic: pfuze3000@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
diff --git a/Bindings/regulator/pwm-regulator.txt b/Bindings/regulator/pwm-regulator.txt
new file mode 100644
index 000000000000..ce91f61feb12
--- /dev/null
+++ b/Bindings/regulator/pwm-regulator.txt
@@ -0,0 +1,27 @@
+pwm regulator bindings
+
+Required properties:
+- compatible: Should be "pwm-regulator"
+- pwms: OF device-tree PWM specification (see PWM binding pwm.txt)
+- voltage-table: voltage and duty table, include 2 members in each set of
+  brackets, first one is voltage(unit: uv), the next is duty(unit: percent)
+
+Any property defined as part of the core regulator binding defined in
+regulator.txt can also be used.
+
+Example:
+	pwm_regulator {
+		compatible = "pwm-regulator;
+		pwms = <&pwm1 0 8448 0>;
+
+		voltage-table = <1114000 0>,
+				<1095000 10>,
+				<1076000 20>,
+				<1056000 30>,
+				<1036000 40>,
+				<1016000 50>;
+
+		regulator-min-microvolt = <1016000>;
+		regulator-max-microvolt = <1114000>;
+		regulator-name = "vdd_logic";
+	};
diff --git a/Bindings/regulator/regulator.txt b/Bindings/regulator/regulator.txt
index 86074334e342..abb26b58c83e 100644
--- a/Bindings/regulator/regulator.txt
+++ b/Bindings/regulator/regulator.txt
@@ -19,6 +19,24 @@ Optional properties:
   design requires. This property describes the total system ramp time
   required due to the combination of internal ramping of the regulator itself,
   and board design issues such as trace capacitance and load on the supply.
+- regulator-state-mem sub-root node for Suspend-to-RAM mode
+  : suspend to memory, the device goes to sleep, but all data stored in memory,
+  only some external interrupt can wake the device.
+- regulator-state-disk sub-root node for Suspend-to-DISK mode
+  : suspend to disk, this state operates similarly to Suspend-to-RAM,
+  but includes a final step of writing memory contents to disk.
+- regulator-state-[mem/disk] node has following common properties:
+	- regulator-on-in-suspend: regulator should be on in suspend state.
+	- regulator-off-in-suspend: regulator should be off in suspend state.
+	- regulator-suspend-microvolt: regulator should be set to this voltage
+	  in suspend.
+	- regulator-mode: operating mode in the given suspend state.
+	  The set of possible operating modes depends on the capabilities of
+	  every hardware so the valid modes are documented on each regulator
+	  device tree binding document.
+- regulator-initial-mode: initial operating mode. The set of possible operating
+  modes depends on the capabilities of every hardware so each device binding
+  documentation explains which values the regulator supports.
 
 Deprecated properties:
 - regulator-compatible: If a regulator chip contains multiple
@@ -34,6 +52,10 @@ Example:
 		regulator-max-microvolt = <2500000>;
 		regulator-always-on;
 		vin-supply = <&vin>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
 	};
 
 Regulator Consumers:
diff --git a/Bindings/regulator/sky81452-regulator.txt b/Bindings/regulator/sky81452-regulator.txt
new file mode 100644
index 000000000000..f9acbc1f3c6b
--- /dev/null
+++ b/Bindings/regulator/sky81452-regulator.txt
@@ -0,0 +1,18 @@
+SKY81452 voltage regulator
+
+Required properties:
+- regulator node named lout.
+- any required generic properties defined in regulator.txt
+
+Optional properties:
+- any available generic properties defined in regulator.txt
+
+Example:
+
+	regulator {
+		lout {
+			regulator-name = "sky81452-lout";
+			regulator-min-microvolt = <4500000>;
+			regulator-max-microvolt = <8000000>;
+		};
+	};
diff --git a/Bindings/regulator/tps65090.txt b/Bindings/regulator/tps65090.txt
index 340980239ea9..ca69f5e3040c 100644
--- a/Bindings/regulator/tps65090.txt
+++ b/Bindings/regulator/tps65090.txt
@@ -45,8 +45,8 @@ Example:
 		infet5-supply = <&some_reg>;
 		infet6-supply = <&some_reg>;
 		infet7-supply = <&some_reg>;
-		vsys_l1-supply = <&some_reg>;
-		vsys_l2-supply = <&some_reg>;
+		vsys-l1-supply = <&some_reg>;
+		vsys-l2-supply = <&some_reg>;
 
 		regulators {
 			dcdc1 {
diff --git a/Bindings/reset/st,sti-picophyreset.txt b/Bindings/reset/st,sti-picophyreset.txt
new file mode 100644
index 000000000000..54ae9f747e45
--- /dev/null
+++ b/Bindings/reset/st,sti-picophyreset.txt
@@ -0,0 +1,42 @@
+STMicroelectronics STi family Sysconfig Picophy SoftReset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in
+the STi family SoC system configuration registers.
+
+The actual action taken when softreset is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers and after an assert/deassert sequence the hardware's previous state
+may no longer be valid.
+
+Please refer to Documentation/devicetree/bindings/reset/reset.txt
+for common reset controller binding usage.
+
+Required properties:
+- compatible: Should be "st,stih407-picophyreset"
+- #reset-cells: 1, see below
+
+Example:
+
+	picophyreset: picophyreset-controller {
+		compatible = "st,stih407-picophyreset";
+		#reset-cells = <1>;
+	};
+
+Specifying picophyreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the picophyreset device node and an
+index specifying which channel to use, as described in
+Documentation/devicetree/bindings/reset/reset.txt.
+
+Example:
+
+	usb2_picophy0: usbpicophy@0 {
+		resets = <&picophyreset STIH407_PICOPHY0_RESET>;
+	};
+
+Macro definitions for the supported reset channels can be found in:
+include/dt-bindings/reset-controller/stih407-resets.h
diff --git a/Bindings/rng/apm,rng.txt b/Bindings/rng/apm,rng.txt
new file mode 100644
index 000000000000..4dde4b06cdd9
--- /dev/null
+++ b/Bindings/rng/apm,rng.txt
@@ -0,0 +1,17 @@
+APM X-Gene SoC random number generator.
+
+Required properties:
+
+- compatible  : should be "apm,xgene-rng"
+- reg         : specifies base physical address and size of the registers map
+- clocks      : phandle to clock-controller plus clock-specifier pair
+- interrupts  : specify the fault interrupt for the RNG device
+
+Example:
+
+	rng: rng@10520000 {
+		compatible = "apm,xgene-rng";
+		reg = <0x0 0x10520000 0x0 0x100>;
+		interrupts =   <0x0 0x41 0x4>;
+		clocks = <&rngpkaclk 0>;
+	};
diff --git a/Bindings/rtc/armada-380-rtc.txt b/Bindings/rtc/armada-380-rtc.txt
new file mode 100644
index 000000000000..2eb9d4ee7dc0
--- /dev/null
+++ b/Bindings/rtc/armada-380-rtc.txt
@@ -0,0 +1,22 @@
+* Real Time Clock of the Armada 38x SoCs
+
+RTC controller for the Armada 38x SoCs
+
+Required properties:
+- compatible : Should be "marvell,armada-380-rtc"
+- reg: a list of base address and size pairs, one for each entry in
+  reg-names
+- reg names: should contain:
+  * "rtc" for the RTC registers
+  * "rtc-soc" for the SoC related registers and among them the one
+    related to the interrupt.
+- interrupts: IRQ line for the RTC.
+
+Example:
+
+rtc@a3800 {
+	compatible = "marvell,armada-380-rtc";
+	reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+	reg-names = "rtc", "rtc-soc";
+	interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Bindings/rtc/atmel,at91sam9-rtc.txt b/Bindings/rtc/atmel,at91sam9-rtc.txt
new file mode 100644
index 000000000000..6ae79d1843f3
--- /dev/null
+++ b/Bindings/rtc/atmel,at91sam9-rtc.txt
@@ -0,0 +1,23 @@
+Atmel AT91SAM9260 Real Time Timer
+
+Required properties:
+- compatible: should be: "atmel,at91sam9260-rtt"
+- reg: should encode the memory region of the RTT controller
+- interrupts: rtt alarm/event interrupt
+- clocks: should contain the 32 KHz slow clk that will drive the RTT block.
+- atmel,rtt-rtc-time-reg: should encode the GPBR register used to store
+	the time base when the RTT is used as an RTC.
+	The first cell should point to the GPBR node and the second one
+	encode the offset within the GPBR block (or in other words, the
+	GPBR register used to store the time base).
+
+
+Example:
+
+rtt@fffffd20 {
+	compatible = "atmel,at91sam9260-rtt";
+	reg = <0xfffffd20 0x10>;
+	interrupts = <1 4 7>;
+	clocks = <&clk32k>;
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
diff --git a/Bindings/rtc/dallas,ds1339.txt b/Bindings/rtc/dallas,ds1339.txt
new file mode 100644
index 000000000000..916f57601a8f
--- /dev/null
+++ b/Bindings/rtc/dallas,ds1339.txt
@@ -0,0 +1,18 @@
+* Dallas DS1339		I2C Serial Real-Time Clock
+
+Required properties:
+- compatible: Should contain "dallas,ds1339".
+- reg: I2C address for chip
+
+Optional properties:
+- trickle-resistor-ohms : Selected resistor for trickle charger
+	Values usable for ds1339 are 250, 2000, 4000
+	Should be given if trickle charger should be enabled
+- trickle-diode-disable : Do not use internal trickle charger diode
+	Should be given if internal trickle charger diode should be disabled
+Example:
+	ds1339: rtc@68 {
+		compatible = "dallas,ds1339";
+		trickle-resistor-ohms = <250>;
+		reg = <0x68>;
+	};
diff --git a/Bindings/rtc/isil,isl12057.txt b/Bindings/rtc/isil,isl12057.txt
new file mode 100644
index 000000000000..501c39ceae79
--- /dev/null
+++ b/Bindings/rtc/isil,isl12057.txt
@@ -0,0 +1,78 @@
+Intersil ISL12057 I2C RTC/Alarm chip
+
+ISL12057 is a trivial I2C device (it has simple device tree bindings,
+consisting of a compatible field, an address and possibly an interrupt
+line).
+
+Nonetheless, it also supports an option boolean property
+("isil,irq2-can-wakeup-machine") to handle the specific use-case found
+on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104
+and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip
+(associated with the alarm supported by the driver) is not connected
+to the SoC but to a PMIC. It allows the device to be powered up when
+RTC alarm rings. In order to mark the device has a wakeup source and
+get access to the 'wakealarm' sysfs entry, this specific property can
+be set when the IRQ#2 pin of the chip is not connected to the SoC but
+can wake up the device.
+
+Required properties supported by the device:
+
+ - "compatible": must be "isil,isl12057"
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+ - "isil,irq2-can-wakeup-machine": mark the chip as a wakeup source,
+   independently of the availability of an IRQ line connected to the
+   SoC.
+
+ - "interrupt-parent", "interrupts": for passing the interrupt line
+   of the SoC connected to IRQ#2 of the RTC chip.
+
+
+Example isl12057 node without IRQ#2 pin connected (no alarm support):
+
+	isl12057: isl12057@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+	};
+
+
+Example isl12057 node with IRQ#2 pin connected to main SoC via MPP6 (note
+that the pinctrl-related properties below are given for completeness and
+may not be required or may be different depending on your system or
+SoC, and the main function of the MPP used as IRQ line, i.e.
+"interrupt-parent" and "interrupts" are usually sufficient):
+
+		    pinctrl {
+				...
+
+				rtc_alarm_pin: rtc_alarm_pin {
+					marvell,pins = "mpp6";
+					marvell,function = "gpio";
+				};
+
+				...
+
+		    };
+
+	...
+
+	isl12057: isl12057@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+		pinctrl-0 = <&rtc_alarm_pin>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+
+Example isl12057 node without IRQ#2 pin connected to the SoC but to a
+PMIC, allowing the device to be started based on configured alarm:
+
+	isl12057: isl12057@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+		isil,irq2-can-wakeup-machine;
+	};
diff --git a/Bindings/rtc/nvidia,tegra20-rtc.txt b/Bindings/rtc/nvidia,tegra20-rtc.txt
index 652d1ff2e8be..b7d98ed3e098 100644
--- a/Bindings/rtc/nvidia,tegra20-rtc.txt
+++ b/Bindings/rtc/nvidia,tegra20-rtc.txt
@@ -6,7 +6,9 @@ state.
 
 Required properties:
 
-- compatible : should be "nvidia,tegra20-rtc".
+- compatible : For Tegra20, must contain "nvidia,tegra20-rtc".  Otherwise,
+  must contain '"nvidia,<chip>-rtc", "nvidia,tegra20-rtc"', where <chip>
+  can be tegra30, tegra114, tegra124, or tegra132.
 - reg : Specifies base physical address and size of the registers.
 - interrupts : A single interrupt specifier.
 - clocks : Must contain one entry, for the module clock.
diff --git a/Bindings/rtc/nxp,rtc-2123.txt b/Bindings/rtc/nxp,rtc-2123.txt
new file mode 100644
index 000000000000..5cbc0b145a61
--- /dev/null
+++ b/Bindings/rtc/nxp,rtc-2123.txt
@@ -0,0 +1,16 @@
+NXP PCF2123 SPI Real Time Clock
+
+Required properties:
+- compatible: should be: "nxp,rtc-pcf2123"
+- reg: should be the SPI slave chipselect address
+
+Optional properties:
+- spi-cs-high: PCF2123 needs chipselect high
+
+Example:
+
+rtc: nxp,rtc-pcf2123@3 {
+	compatible = "nxp,rtc-pcf2123"
+	reg = <3>
+	spi-cs-high;
+};
diff --git a/Bindings/rtc/rtc-omap.txt b/Bindings/rtc/rtc-omap.txt
index 5a0f02d34d95..4ba4dbd34289 100644
--- a/Bindings/rtc/rtc-omap.txt
+++ b/Bindings/rtc/rtc-omap.txt
@@ -5,11 +5,17 @@ Required properties:
 	- "ti,da830-rtc"  - for RTC IP used similar to that on DA8xx SoC family.
 	- "ti,am3352-rtc" - for RTC IP used similar to that on AM335x SoC family.
 			    This RTC IP has special WAKE-EN Register to enable
-			    Wakeup generation for event Alarm.
+			    Wakeup generation for event Alarm. It can also be
+			    used to control an external PMIC via the
+			    pmic_power_en pin.
 - reg: Address range of rtc register set
 - interrupts: rtc timer, alarm interrupts in order
 - interrupt-parent: phandle for the interrupt controller
 
+Optional properties:
+- system-power-controller: whether the rtc is controlling the system power
+  through pmic_power_en
+
 Example:
 
 rtc@1c23000 {
@@ -18,4 +24,5 @@ rtc@1c23000 {
 	interrupts = <19
 		      19>;
 	interrupt-parent = <&intc>;
+	system-power-controller;
 };
diff --git a/Bindings/rtc/rtc-opal.txt b/Bindings/rtc/rtc-opal.txt
new file mode 100644
index 000000000000..af87e5ecac54
--- /dev/null
+++ b/Bindings/rtc/rtc-opal.txt
@@ -0,0 +1,16 @@
+IBM OPAL real-time clock
+------------------------
+
+Required properties:
+- comapatible: Should be "ibm,opal-rtc"
+
+Optional properties:
+- has-tpo: Decides if the wakeup is supported or not.
+
+Example:
+	rtc {
+		compatible = "ibm,opal-rtc";
+		has-tpo;
+		phandle = <0x10000029>;
+		linux,phandle = <0x10000029>;
+	};
diff --git a/Bindings/rtc/s3c-rtc.txt b/Bindings/rtc/s3c-rtc.txt
index 7ac7259fe9ea..ab757b84daa7 100644
--- a/Bindings/rtc/s3c-rtc.txt
+++ b/Bindings/rtc/s3c-rtc.txt
@@ -3,7 +3,10 @@
 Required properties:
 - compatible: should be one of the following.
     * "samsung,s3c2410-rtc" - for controllers compatible with s3c2410 rtc.
+    * "samsung,s3c2416-rtc" - for controllers compatible with s3c2416 rtc.
+    * "samsung,s3c2443-rtc" - for controllers compatible with s3c2443 rtc.
     * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc.
+    * "samsung,exynos3250-rtc" - for controllers compatible with exynos3250 rtc.
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: Two interrupt numbers to the cpu should be specified. First
diff --git a/Bindings/rtc/sun6i-rtc.txt b/Bindings/rtc/sun6i-rtc.txt
new file mode 100644
index 000000000000..f007e428a1ab
--- /dev/null
+++ b/Bindings/rtc/sun6i-rtc.txt
@@ -0,0 +1,17 @@
+* sun6i Real Time Clock
+
+RTC controller for the Allwinner A31
+
+Required properties:
+- compatible	: Should be "allwinner,sun6i-a31-rtc"
+- reg		: physical base address of the controller and length of
+		  memory mapped region.
+- interrupts	: IRQ lines for the RTC alarm 0 and alarm 1, in that order.
+
+Example:
+
+rtc: rtc@01f00000 {
+	compatible = "allwinner,sun6i-a31-rtc";
+	reg = <0x01f00000 0x54>;
+	interrupts = <0 40 4>, <0 41 4>;
+};
diff --git a/Bindings/security/tpm/st33zp24-i2c.txt b/Bindings/security/tpm/st33zp24-i2c.txt
new file mode 100644
index 000000000000..3ad115efed1e
--- /dev/null
+++ b/Bindings/security/tpm/st33zp24-i2c.txt
@@ -0,0 +1,36 @@
+* STMicroelectronics SAS. ST33ZP24 TPM SoC
+
+Required properties:
+- compatible: Should be "st,st33zp24-i2c".
+- clock-frequency: I²C work frequency.
+- reg: address on the bus
+
+Optional ST33ZP24 Properties:
+- interrupt-parent: phandle for the interrupt gpio controller
+- interrupts: GPIO interrupt to which the chip is connected
+- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state.
+If set, power must be present when the platform is going into sleep/hibernate mode.
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2):
+
+&i2c2 {
+
+        status = "okay";
+
+        st33zp24: st33zp24@13 {
+
+                compatible = "st,st33zp24-i2c";
+
+                reg = <0x13>;
+                clock-frequency = <400000>;
+
+                interrupt-parent = <&gpio5>;
+                interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+
+                lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+        };
+};
diff --git a/Bindings/serial/bcm63xx-uart.txt b/Bindings/serial/bcm63xx-uart.txt
new file mode 100644
index 000000000000..5c52e5eef16d
--- /dev/null
+++ b/Bindings/serial/bcm63xx-uart.txt
@@ -0,0 +1,30 @@
+* BCM63xx UART
+
+Required properties:
+
+- compatible: "brcm,bcm6345-uart"
+
+- reg: The base address of the UART register bank.
+
+- interrupts: A single interrupt specifier.
+
+- clocks: Clock driving the hardware; used to figure out the baud rate
+  divisor.
+
+Example:
+
+	uart0: serial@14e00520 {
+		compatible = "brcm,bcm6345-uart";
+		reg = <0x14e00520 0x18>;
+		interrupt-parent = <&periph_intc>;
+		interrupts = <2>;
+		clocks = <&periph_clk>;
+	};
+
+	clocks {
+		periph_clk: periph_clk@0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <54000000>;
+		};
+	};
diff --git a/Bindings/serial/cirrus,clps711x-uart.txt b/Bindings/serial/cirrus,clps711x-uart.txt
index 12f3cf834deb..caaeb2583579 100644
--- a/Bindings/serial/cirrus,clps711x-uart.txt
+++ b/Bindings/serial/cirrus,clps711x-uart.txt
@@ -8,7 +8,8 @@ Required properties:
 - syscon: Phandle to SYSCON node, which contain UART control bits.
 
 Optional properties:
-- uart-use-ms: Indicate the UART has modem signal (DCD, DSR, CTS).
+- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
+  line respectively.
 
 Note: Each UART port should have an alias correctly numbered
 in "aliases" node.
@@ -24,5 +25,7 @@ Example:
 		interrupts = <12 13>;
 		clocks = <&clks 11>;
 		syscon = <&syscon1>;
-		uart-use-ms;
+		cts-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
+		dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
+		dcd-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
 	};
diff --git a/Bindings/serial/digicolor-usart.txt b/Bindings/serial/digicolor-usart.txt
new file mode 100644
index 000000000000..2d3ede66889d
--- /dev/null
+++ b/Bindings/serial/digicolor-usart.txt
@@ -0,0 +1,27 @@
+Binding for Conexant Digicolor USART
+
+Note: this binding is only applicable for using the USART peripheral as
+UART. USART also support synchronous serial protocols like SPI and I2S. Use
+the binding that matches the wiring of your system.
+
+Required properties:
+- compatible : should be "cnxt,cx92755-usart".
+- reg: Should contain USART controller registers location and length.
+- interrupts: Should contain a single USART controller interrupt.
+- clocks: Must contain phandles to the USART clock
+  See ../clocks/clock-bindings.txt for details.
+
+Note: Each UART port should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+	aliases {
+		serial0 = &uart0;
+	};
+
+	uart0: uart@f0000740 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000740 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <44>;
+	};
diff --git a/Bindings/serial/fsl-mxs-auart.txt b/Bindings/serial/fsl-mxs-auart.txt
index 59a40f18d551..7c408c87e613 100644
--- a/Bindings/serial/fsl-mxs-auart.txt
+++ b/Bindings/serial/fsl-mxs-auart.txt
@@ -11,8 +11,13 @@ Required properties:
 - dma-names: "rx" for RX channel, "tx" for TX channel.
 
 Optional properties:
-- fsl,uart-has-rtscts : Indicate the UART has RTS and CTS lines,
+- fsl,uart-has-rtscts : Indicate the UART has RTS and CTS lines
+  for hardware flow control,
 	it also means you enable the DMA support for this UART.
+- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
+  line respectively. It will use specified PIO instead of the peripheral
+  function pin for the USART feature.
+  If unsure, don't specify this property.
 
 Example:
 auart0: serial@8006a000 {
@@ -21,6 +26,9 @@ auart0: serial@8006a000 {
 	interrupts = <112>;
 	dmas = <&dma_apbx 8>, <&dma_apbx 9>;
 	dma-names = "rx", "tx";
+	cts-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 };
 
 Note: Each auart port should have an alias correctly numbered in "aliases"
diff --git a/Bindings/serial/mtk-uart.txt b/Bindings/serial/mtk-uart.txt
new file mode 100644
index 000000000000..44152261e5c5
--- /dev/null
+++ b/Bindings/serial/mtk-uart.txt
@@ -0,0 +1,26 @@
+* Mediatek Universal Asynchronous Receiver/Transmitter (UART)
+
+Required properties:
+- compatible should contain:
+  * "mediatek,mt8135-uart" for MT8135 compatible UARTS
+  * "mediatek,mt8127-uart" for MT8127 compatible UARTS
+  * "mediatek,mt8173-uart" for MT8173 compatible UARTS
+  * "mediatek,mt6589-uart" for MT6589 compatible UARTS
+  * "mediatek,mt6582-uart" for MT6582 compatible UARTS
+  * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582, 
+	MT6577)
+
+- reg: The base address of the UART register bank.
+
+- interrupts: A single interrupt specifier.
+
+- clocks: Clock driving the hardware.
+
+Example:
+
+	uart0: serial@11006000 {
+		compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
+		reg = <0x11006000 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+	};
diff --git a/Bindings/serial/of-serial.txt b/Bindings/serial/of-serial.txt
index 77054772a8f4..91d5ab0e60fc 100644
--- a/Bindings/serial/of-serial.txt
+++ b/Bindings/serial/of-serial.txt
@@ -8,12 +8,18 @@ Required properties:
 	- "ns16550"
 	- "ns16750"
 	- "ns16850"
-	- "nvidia,tegra20-uart"
+	- For Tegra20, must contain "nvidia,tegra20-uart"
+	- For other Tegra, must contain '"nvidia,<chip>-uart",
+	  "nvidia,tegra20-uart"' where <chip> is tegra30, tegra114, tegra124,
+	  tegra132, or tegra210.
 	- "nxp,lpc3220-uart"
+	- "ralink,rt2880-uart"
 	- "ibm,qpace-nwp-serial"
 	- "altr,16550-FIFO32"
 	- "altr,16550-FIFO64"
 	- "altr,16550-FIFO128"
+	- "fsl,16550-FIFO64"
+	- "fsl,ns16550"
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.
@@ -37,7 +43,17 @@ Optional properties:
 - auto-flow-control: one way to enable automatic flow control support. The
   driver is allowed to detect support for the capability even without this
   property.
-- has-hw-flow-control: the hardware has flow control capability.
+
+Note:
+* fsl,ns16550:
+  ------------
+  Freescale DUART is very similar to the PC16552D (and to a
+  pair of NS16550A), albeit with some nonstandard behavior such as
+  erratum A-004737 (relating to incorrect BRK handling).
+
+  Represents a single port that is compatible with the DUART found
+  on many Freescale chips (examples include mpc8349, mpc8548,
+  mpc8641d, p4080 and ls2085a).
 
 Example:
 
diff --git a/Bindings/serial/pl011.txt b/Bindings/serial/pl011.txt
index 5d2e840ae65c..ba3ecb8cb5a1 100644
--- a/Bindings/serial/pl011.txt
+++ b/Bindings/serial/pl011.txt
@@ -6,12 +6,46 @@ Required properties:
 - interrupts: exactly one interrupt specifier
 
 Optional properties:
-- pinctrl: When present, must have one state named "sleep"
-	   and one state named "default"
-- clocks:  When present, must refer to exactly one clock named
+- pinctrl:
+	   When present, must have one state named "default",
+	   and may contain a second name named "sleep". The former
+	   state sets up pins for ordinary operation whereas
+	   the latter state will put the associated pins to sleep
+	   when the UART is unused
+- clocks:
+	   When present, the first clock listed must correspond to
+	   the clock named UARTCLK on the IP block, i.e. the clock
+	   to the external serial line, whereas the second clock
+	   must correspond to the PCLK clocking the internal logic
+	   of the block. Just listing one clock (the first one) is
+	   deprecated.
+- clocks-names:
+	   When present, the first clock listed must be named
+	   "uartclk" and the second clock listed must be named
 	   "apb_pclk"
-- dmas:	   When present, may have one or two dma channels.
+- dmas:	
+	   When present, may have one or two dma channels.
 	   The first one must be named "rx", the second one
 	   must be named "tx".
+- auto-poll:
+	   Enables polling when using RX DMA.
+- poll-rate-ms:
+	   Rate at which poll occurs when auto-poll is set,
+	   default 100ms.
+- poll-timeout-ms:
+	   Poll timeout when auto-poll is set, default
+	   3000ms.
 
 See also bindings/arm/primecell.txt
+
+Example:
+
+uart@80120000 {
+	compatible = "arm,pl011", "arm,primecell";
+	reg = <0x80120000 0x1000>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+	dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
+	dma-names = "rx", "tx";
+	clocks = <&foo_clk>, <&bar_clk>;
+	clock-names = "uartclk", "apb_pclk";
+};
diff --git a/Bindings/serial/qcom,msm-uartdm.txt b/Bindings/serial/qcom,msm-uartdm.txt
index ffa5b784c66e..a2114c217376 100644
--- a/Bindings/serial/qcom,msm-uartdm.txt
+++ b/Bindings/serial/qcom,msm-uartdm.txt
@@ -27,27 +27,52 @@ Optional properties:
 - dmas: Should contain dma specifiers for transmit and receive channels
 - dma-names: Should contain "tx" for transmit and "rx" for receive channels
 
+Note: Aliases may be defined to ensure the correct ordering of the UARTs.
+The alias serialN will result in the UART being assigned port N.  If any
+serialN alias exists, then an alias must exist for each enabled UART.  The
+serialN aliases should be in a .dts file instead of in a .dtsi file.
+
 Examples:
 
-A uartdm v1.4 device with dma capabilities.
-
-serial@f991e000 {
-	compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-	reg = <0xf991e000 0x1000>;
-	interrupts = <0 108 0x0>;
-	clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
-	clock-names = "core", "iface";
-	dmas = <&dma0 0>, <&dma0 1>;
-	dma-names = "tx", "rx";
-};
-
-A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
-
-serial@19c40000 {
-	compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-	reg = <0x19c40000 0x1000>,
-	      <0x19c00000 0x1000>;
-	interrupts = <0 195 0x0>;
-	clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
-	clock-names = "core", "iface";
-};
+- A uartdm v1.4 device with dma capabilities.
+
+	serial@f991e000 {
+		compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+		reg = <0xf991e000 0x1000>;
+		interrupts = <0 108 0x0>;
+		clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
+		clock-names = "core", "iface";
+		dmas = <&dma0 0>, <&dma0 1>;
+		dma-names = "tx", "rx";
+	};
+
+- A uartdm v1.3 device without dma capabilities and part of a GSBI complex.
+
+	serial@19c40000 {
+		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+		reg = <0x19c40000 0x1000>,
+		<0x19c00000 0x1000>;
+		interrupts = <0 195 0x0>;
+		clocks = <&gsbi5_uart_cxc>, <&gsbi5_ahb_cxc>;
+		clock-names = "core", "iface";
+	};
+
+- serialN alias.
+
+	aliases {
+		serial0 = &uarta;
+		serial1 = &uartc;
+		serial2 = &uartb;
+	};
+
+	uarta: serial@12490000 {
+		status = "ok";
+	};
+
+	uartb: serial@16340000 {
+		status = "ok";
+	};
+
+	uartc: serial@1a240000 {
+		status = "ok";
+	};
diff --git a/Bindings/serial/renesas,sci-serial.txt b/Bindings/serial/renesas,sci-serial.txt
index b3556609a06f..ae73bb0e9ad9 100644
--- a/Bindings/serial/renesas,sci-serial.txt
+++ b/Bindings/serial/renesas,sci-serial.txt
@@ -4,8 +4,7 @@ Required properties:
 
   - compatible: Must contain one of the following:
 
-    - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
-    - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
+    - "renesas,scif-r7s72100" for R7S72100 (RZ/A1H) SCIF compatible UART.
     - "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART.
     - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
     - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
@@ -20,6 +19,12 @@ Required properties:
     - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2) SCIFA compatible UART.
     - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2) SCIFB compatible UART.
     - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2) HSCIF compatible UART.
+    - "renesas,scif-r8a7794" for R8A7794 (R-Car E2) SCIF compatible UART.
+    - "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART.
+    - "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART.
+    - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART.
+    - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
+    - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
     - "renesas,scif" for generic SCIF compatible UART.
     - "renesas,scifa" for generic SCIFA compatible UART.
     - "renesas,scifb" for generic SCIFB compatible UART.
diff --git a/Bindings/serial/sirf-uart.txt b/Bindings/serial/sirf-uart.txt
index a2dfc6522a91..f0c39261c5d4 100644
--- a/Bindings/serial/sirf-uart.txt
+++ b/Bindings/serial/sirf-uart.txt
@@ -1,7 +1,9 @@
 * CSR SiRFprimaII/atlasVI Universal Synchronous Asynchronous Receiver/Transmitter *
 
 Required properties:
-- compatible : Should be "sirf,prima2-uart" or "sirf, prima2-usp-uart"
+- compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart",
+		"sirf,atlas7-uart" or "sirf,atlas7-bt-uart" which means
+		uart located in BT module and used for BT.
 - reg : Offset and length of the register set for the device
 - interrupts : Should contain uart interrupt
 - fifosize : Should define hardware rx/tx fifo size
@@ -31,3 +33,15 @@ usp@b0090000 {
 	rts-gpios = <&gpio 15 0>;
 	cts-gpios = <&gpio 46 0>;
 };
+
+for uart use in BT module,
+uart6: uart@11000000 {
+	cell-index = <6>;
+	compatible = "sirf,atlas7-bt-uart", "sirf,atlas7-uart";
+	reg = <0x11000000 0x1000>;
+	interrupts = <0 100 0>;
+	clocks = <&clks 138>, <&clks 140>, <&clks 141>;
+	clock-names = "uart", "general", "noc";
+	fifosize = <128>;
+	status = "disabled";
+}
diff --git a/Bindings/serial/sprd-uart.txt b/Bindings/serial/sprd-uart.txt
new file mode 100644
index 000000000000..2aff0f22c9fa
--- /dev/null
+++ b/Bindings/serial/sprd-uart.txt
@@ -0,0 +1,7 @@
+* Spreadtrum serial UART
+
+Required properties:
+- compatible: must be "sprd,sc9836-uart"
+- reg: offset and length of the register set for the device
+- interrupts: exactly one interrupt specifier
+- clocks: phandles to input clocks.
diff --git a/Bindings/serial/vt8500-uart.txt b/Bindings/serial/vt8500-uart.txt
index 795c393d09c4..2b64e6107fb3 100644
--- a/Bindings/serial/vt8500-uart.txt
+++ b/Bindings/serial/vt8500-uart.txt
@@ -1,7 +1,8 @@
 * VIA VT8500 and WonderMedia WM8xxx UART Controller
 
 Required properties:
-- compatible: should be "via,vt8500-uart"
+- compatible: should be "via,vt8500-uart" (for VIA/WonderMedia chips up to and
+	including WM8850/WM8950), or "wm,wm8880-uart" (for WM8880 and later)
 
 - reg: base physical address of the controller and length of memory mapped
 	region.
diff --git a/Bindings/serio/allwinner,sun4i-ps2.txt b/Bindings/serio/allwinner,sun4i-ps2.txt
new file mode 100644
index 000000000000..362a76925bcd
--- /dev/null
+++ b/Bindings/serio/allwinner,sun4i-ps2.txt
@@ -0,0 +1,23 @@
+* Device tree bindings for Allwinner A10, A20 PS2 host controller
+
+A20 PS2 is dual role controller (PS2 host and PS2 device). These bindings are
+for PS2 A10/A20 host controller. IBM compliant IBM PS2 and AT-compatible keyboard
+and mouse can be connected.
+
+Required properties:
+
+ - reg             : Offset and length of the register set for the device.
+ - compatible      : Should be as of the following:
+                     - "allwinner,sun4i-a10-ps2"
+ - interrupts      : The interrupt line connected to the PS2.
+ - clocks          : The gate clk connected to the PS2.
+
+
+Example:
+	ps20: ps2@0x01c2a000 {
+		compatible = "allwinner,sun4i-a10-ps2";
+		reg = <0x01c2a000 0x400>;
+		interrupts = <0 62 4>;
+		clocks = <&apb1_gates 6>;
+		status = "disabled";
+	};
diff --git a/Bindings/soc/fsl/bman-portals.txt b/Bindings/soc/fsl/bman-portals.txt
new file mode 100644
index 000000000000..2a00e14e11e0
--- /dev/null
+++ b/Bindings/soc/fsl/bman-portals.txt
@@ -0,0 +1,56 @@
+QorIQ DPAA Buffer Manager Portals Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- BMan Portal
+	- Example
+
+BMan Portal Node
+
+Portals are memory mapped interfaces to BMan that allow low-latency, lock-less
+interaction by software running on processor cores, accelerators and network
+interfaces with the BMan
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,bman-portal-<hardware revision>"
+			May include "fsl,<SoC>-bman-portal" or "fsl,bman-portal"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Two regions. The first is the cache-enabled region of
+			the portal. The second is the cache-inhibited region of
+			the portal
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property
+
+EXAMPLE
+
+The example below shows a (P4080) BMan portals container/bus node with two portals
+
+	bman-portals@ff4000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0xf 0xf4000000 0x200000>;
+
+		bman-portal@0 {
+			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+			reg = <0x0 0x4000>, <0x100000 0x1000>;
+			interrupts = <105 2 0 0>;
+		};
+		bman-portal@4000 {
+			compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal";
+			reg = <0x4000 0x4000>, <0x101000 0x1000>;
+			interrupts = <107 2 0 0>;
+		};
+	};
diff --git a/Bindings/soc/fsl/bman.txt b/Bindings/soc/fsl/bman.txt
new file mode 100644
index 000000000000..47ac834414d8
--- /dev/null
+++ b/Bindings/soc/fsl/bman.txt
@@ -0,0 +1,135 @@
+QorIQ DPAA Buffer Manager Device Tree Bindings
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- BMan Node
+	- BMan Private Memory Node
+	- Example
+
+BMan Node
+
+The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA).
+BMan supports hardware allocation and deallocation of buffers belonging to pools
+originally created by software with configurable depletion thresholds. This
+binding covers the CCSR space programming model
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,bman"
+			May include "fsl,<SoC>-bman"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Registers region within the CCSR address space
+
+The BMan revision information is located in the BMAN_IP_REV_1/2 registers which
+are located at offsets 0xbf8 and 0xbfc
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property. The error interrupt
+
+- fsl,bman-portals
+	Usage:		Required
+	Value type:	<phandle>
+	Definition:	Phandle to this BMan instance's portals
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+	For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+Devices connected to a BMan instance via Direct Connect Portals (DCP) must link
+to the respective BMan instance
+
+- fsl,bman
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Description:	List of phandle and DCP index pairs, to the BMan instance
+			to which this device is connected via the DCP
+
+BMan Private Memory Node
+
+BMan requires a contiguous range of physical memory used for the backing store
+for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a
+node under the /reserved-memory node
+
+The BMan FBPR memory node must be named "bman-fbpr"
+
+PROPERTIES
+
+- compatible
+	Usage:		required
+	Value type:	<stringlist>
+	Definition:	Must inclide "fsl,bman-fbpr"
+
+The following constraints are relevant to the FBPR private memory:
+	- The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to
+	  16 GiB
+	- The alignment must be a muliptle of the memory size
+
+The size of the FBPR must be chosen by observing the hardware features configured
+via the Reset Configuration Word (RCW) and that are relevant to a specific board
+(e.g. number of MAC(s) pinned-out, number of offline/host command FMan ports,
+etc.). The size configured in the DT must reflect the hardware capabilities and
+not the specific needs of an application
+
+For additional details about reserved memory regions see reserved-memory.txt
+
+EXAMPLE
+
+The example below shows a BMan FBPR dynamic allocation memory node
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			compatible = "fsl,bman-fbpr";
+			alloc-ranges = <0 0 0x10 0>;
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+	};
+
+The example below shows a (P4080) BMan CCSR-space node
+
+	bportals: bman-portals@ff4000000 {
+		...
+	};
+
+	crypto@300000 {
+		...
+		fsl,bman = <&bman, 2>;
+		...
+	};
+
+	bman: bman@31a000 {
+		compatible = "fsl,bman";
+		reg = <0x31a000 0x1000>;
+		interrupts = <16 2 1 2>;
+		fsl,liodn = <0x17>;
+		fsl,bman-portals = <&bportals>;
+		memory-region = <&bman_fbpr>;
+	};
+
+	fman@400000 {
+		...
+		fsl,bman = <&bman, 0>;
+		...
+	};
diff --git a/Bindings/soc/fsl/qman-portals.txt b/Bindings/soc/fsl/qman-portals.txt
new file mode 100644
index 000000000000..48c4dae5d6f9
--- /dev/null
+++ b/Bindings/soc/fsl/qman-portals.txt
@@ -0,0 +1,154 @@
+QorIQ DPAA Queue Manager Portals Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- QMan Portal
+	- QMan Pool Channel
+	- Example
+
+QMan Portal Node
+
+Portals are memory mapped interfaces to QMan that allow low-latency, lock-less
+interaction by software running on processor cores, accelerators and network
+interfaces with the QMan
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,qman-portal-<hardware revision>"
+			May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Two regions. The first is the cache-enabled region of
+			the portal. The second is the cache-inhibited region of
+			the portal
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN
+			(FLIODN)
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+	For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+- fsl,qman-channel-id
+	Usage:		Required
+	Value type:	<u32>
+	Definition:	The hardware index of the channel. This can also be
+			determined by dividing any of the channel's 8 work queue
+			IDs by 8
+
+In addition to these properties the qman-portals should have sub-nodes to
+represent the HW devices/portals that are connected to the software portal
+described here
+
+The currently supported sub-nodes are:
+	* fman0
+	* fman1
+	* pme
+	* crypto
+
+These subnodes should have the following properties:
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+- dev-handle
+	Usage:		Required
+	Value type:	<phandle>
+	Definition:	The phandle to the particular hardware device that this
+			portal is connected to.
+
+DPAA QMan Pool Channel Nodes
+
+Pool Channels are defined with the following properties.
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,qman-pool-channel"
+			May include "fsl,<SoC>-qman-pool-channel"
+
+- fsl,qman-channel-id
+	Usage:		Required
+	Value type:	<u32>
+	Definition:	The hardware index of the channel. This can also be
+			determined by dividing any of the channel's 8 work queue
+			IDs by 8
+
+EXAMPLE
+
+The example below shows a (P4080) QMan portals container/bus node with two portals
+
+	qman-portals@ff4200000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0xf 0xf4200000 0x200000>;
+
+		qman-portal@0 {
+			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+			reg = <0 0x4000>, <0x100000 0x1000>;
+			interrupts = <104 2 0 0>;
+			fsl,liodn = <1 2>;
+			fsl,qman-channel-id = <0>;
+
+			fman0 {
+				fsl,liodn = <0x21>;
+				dev-handle = <&fman0>;
+			};
+			fman1 {
+				fsl,liodn = <0xa1>;
+				dev-handle = <&fman1>;
+			};
+			crypto {
+				fsl,liodn = <0x41 0x66>;
+				dev-handle = <&crypto>;
+			};
+		};
+		qman-portal@4000 {
+			compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal";
+			reg = <0x4000 0x4000>, <0x101000 0x1000>;
+			interrupts = <106 2 0 0>;
+			fsl,liodn = <3 4>;
+			fsl,qman-channel-id = <1>;
+
+			fman0 {
+				fsl,liodn = <0x22>;
+				dev-handle = <&fman0>;
+			};
+			fman1 {
+				fsl,liodn = <0xa2>;
+				dev-handle = <&fman1>;
+			};
+			crypto {
+				fsl,liodn = <0x42 0x67>;
+				dev-handle = <&crypto>;
+			};
+		};
+	};
diff --git a/Bindings/soc/fsl/qman.txt b/Bindings/soc/fsl/qman.txt
new file mode 100644
index 000000000000..556ebb8be75d
--- /dev/null
+++ b/Bindings/soc/fsl/qman.txt
@@ -0,0 +1,175 @@
+QorIQ DPAA Queue Manager Device Tree Binding
+
+Copyright (C) 2008 - 2014 Freescale Semiconductor Inc.
+
+CONTENTS
+
+	- QMan Node
+	- QMan Private Memory Nodes
+	- Example
+
+QMan Node
+
+The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan
+supports queuing and QoS scheduling of frames to CPUs, network interfaces and
+DPAA logic modules, maintains packet ordering within flows. Besides providing
+flow-level queuing, is also responsible for congestion management functions such
+as RED/WRED, congestion notifications and tail discards. This binding covers the
+CCSR space programming model
+
+PROPERTIES
+
+- compatible
+	Usage:		Required
+	Value type:	<stringlist>
+	Definition:	Must include "fsl,qman"
+			May include "fsl,<SoC>-qman"
+
+- reg
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Registers region within the CCSR address space
+
+The QMan revision information is located in the QMAN_IP_REV_1/2 registers which
+are located at offsets 0xbf8 and 0xbfc
+
+- interrupts
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Definition:	Standard property. The error interrupt
+
+- fsl,qman-portals
+	Usage:		Required
+	Value type:	<phandle>
+	Definition:	Phandle to this QMan instance's portals
+
+- fsl,liodn
+	Usage:		See pamu.txt
+	Value type:	<prop-encoded-array>
+	Definition:	PAMU property used for static LIODN assignment
+
+- fsl,iommu-parent
+	Usage:		See pamu.txt
+	Value type:	<phandle>
+	Definition:	PAMU property used for dynamic LIODN assignment
+
+	For additional details about the PAMU/LIODN binding(s) see pamu.txt
+
+- clocks
+	Usage:		See clock-bindings.txt and qoriq-clock.txt
+	Value type:	<prop-encoded-array>
+	Definition:	Reference input clock. Its frequency is half of the
+			platform clock
+
+Devices connected to a QMan instance via Direct Connect Portals (DCP) must link
+to the respective QMan instance
+
+- fsl,qman
+	Usage:		Required
+	Value type:	<prop-encoded-array>
+	Description:	List of phandle and DCP index pairs, to the QMan instance
+			to which this device is connected via the DCP
+
+QMan Private Memory Nodes
+
+QMan requires two contiguous range of physical memory used for the backing store
+for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR).
+This memory is reserved/allocated as a nodes under the /reserved-memory node
+
+The QMan FQD memory node must be named "qman-fqd"
+
+PROPERTIES
+
+- compatible
+	Usage:		required
+	Value type:	<stringlist>
+	Definition:	Must inclide "fsl,qman-fqd"
+
+The QMan PFDR memory node must be named "qman-pfdr"
+
+PROPERTIES
+
+- compatible
+	Usage:		required
+	Value type:	<stringlist>
+	Definition:	Must inclide "fsl,qman-pfdr"
+
+The following constraints are relevant to the FQD and PFDR private memory:
+	- The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to
+	  1 GiB
+	- The alignment must be a muliptle of the memory size
+
+The size of the FQD and PFDP must be chosen by observing the hardware features
+configured via the Reset Configuration Word (RCW) and that are relevant to a
+specific board (e.g. number of MAC(s) pinned-out, number of offline/host command
+FMan ports, etc.). The size configured in the DT must reflect the hardware
+capabilities and not the specific needs of an application
+
+For additional details about reserved memory regions see reserved-memory.txt
+
+EXAMPLE
+
+The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		qman_fqd: qman-fqd {
+			compatible = "fsl,qman-fqd";
+			alloc-ranges = <0 0 0x10 0>;
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			compatible = "fsl,qman-pfdr";
+			alloc-ranges = <0 0 0x10 0>;
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+The example below shows a (P4080) QMan CCSR-space node
+
+	qportals: qman-portals@ff4200000 {
+		...
+	};
+
+	clockgen: global-utilities@e1000 {
+		...
+		sysclk: sysclk {
+			...
+		};
+		...
+		platform_pll: platform-pll@c00 {
+			#clock-cells = <1>;
+			reg = <0xc00 0x4>;
+			compatible = "fsl,qoriq-platform-pll-1.0";
+			clocks = <&sysclk>;
+			clock-output-names = "platform-pll", "platform-pll-div2";
+		};
+		...
+	};
+
+	crypto@300000 {
+		...
+		fsl,qman = <&qman, 2>;
+		...
+	};
+
+	qman: qman@318000 {
+		compatible = "fsl,qman";
+		reg = <0x318000 0x1000>;
+		interrupts = <16 2 1 3>
+		fsl,liodn = <0x16>;
+		fsl,qman-portals = <&qportals>;
+		memory-region = <&qman_fqd &qman_pfdr>;
+		clocks = <&platform_pll 1>;
+	};
+
+	fman@400000 {
+		...
+		fsl,qman = <&qman, 0>;
+		...
+	};
diff --git a/Bindings/soc/ti/keystone-navigator-dma.txt b/Bindings/soc/ti/keystone-navigator-dma.txt
new file mode 100644
index 000000000000..337c4ea5c57b
--- /dev/null
+++ b/Bindings/soc/ti/keystone-navigator-dma.txt
@@ -0,0 +1,111 @@
+Keystone Navigator DMA Controller
+
+This document explains the device tree bindings for the packet dma
+on keystone devices. The Keystone Navigator DMA driver sets up the dma
+channels and flows for the QMSS(Queue Manager SubSystem) who triggers
+the actual data movements across clients using destination queues. Every
+client modules like  NETCP(Network Coprocessor), SRIO(Serial Rapid IO),
+CRYPTO Engines etc has its own instance of dma hardware. QMSS has also
+an internal packet DMA module which is used as an infrastructure DMA
+with zero copy.
+
+Navigator DMA cloud layout:
+	------------------
+	| Navigator DMAs |
+	------------------
+		|
+		|-> DMA instance #0
+		|
+		|-> DMA instance #1
+			.
+			.
+		|
+		|-> DMA instance #n
+
+Navigator DMA properties:
+Required properties:
+ - compatible: Should be "ti,keystone-navigator-dma"
+ - clocks: phandle to dma instances clocks. The clock handles can be as
+	many as the dma instances. The order should be maintained as per
+	the dma instances.
+ - ti,navigator-cloud-address: Should contain base address for the multi-core
+	navigator cloud and number of addresses depends on SOC integration
+	configuration.. Navigator cloud global address needs to be programmed
+	into DMA and the DMA uses it as the physical addresses to reach queue
+	managers. Note that these addresses though points to queue managers,
+	they are relevant only from DMA perspective. The QMSS may not choose to
+	use them since it has a different address space view to reach all
+	its components.
+
+DMA instance properties:
+Required properties:
+ - reg: Should contain register location and length of the following dma
+	register regions. Register regions should be specified in the following
+	order.
+	- Global control register region (global).
+	- Tx DMA channel configuration register region (txchan).
+	- Rx DMA channel configuration register region (rxchan).
+	- Tx DMA channel Scheduler configuration register region (txsched).
+	- Rx DMA flow configuration register region (rxflow).
+
+Optional properties:
+ - reg-names: Names for the register regions.
+ - ti,enable-all: Enable all DMA channels vs clients opening specific channels
+	what they need. This property is useful for the userspace fast path
+	case where the linux drivers enables the channels used by userland
+	stack.
+ - ti,loop-back: To loopback Tx streaming I/F to Rx streaming I/F. Used for
+	      infrastructure transfers.
+ - ti,rx-retry-timeout: Number of dma cycles to wait before retry on buffer
+		     starvation.
+
+Example:
+
+	knav_dmas: knav_dmas@0 {
+		compatible = "ti,keystone-navigator-dma";
+		clocks = <&papllclk>, <&clkxge>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,navigator-cloud-address = <0x23a80000 0x23a90000
+					   0x23aa0000 0x23ab0000>;
+
+		dma_gbe: dma_gbe@0 {
+			reg = <0x2004000 0x100>,
+				  <0x2004400 0x120>,
+				  <0x2004800 0x300>,
+				  <0x2004c00 0x120>,
+				  <0x2005000 0x400>;
+			reg-names = "global", "txchan", "rxchan",
+					"txsched", "rxflow";
+		};
+
+		dma_xgbe: dma_xgbe@0 {
+			reg = <0x2fa1000 0x100>,
+				<0x2fa1400 0x200>,
+				<0x2fa1800 0x200>,
+				<0x2fa1c00 0x200>,
+				<0x2fa2000 0x400>;
+			reg-names = "global", "txchan", "rxchan",
+					"txsched", "rxflow";
+		};
+	};
+
+Navigator DMA client:
+Required properties:
+ - ti,navigator-dmas: List of one or more DMA specifiers, each consisting of
+			- A phandle pointing to DMA instance node
+			- A DMA channel number as a phandle arg.
+ - ti,navigator-dma-names: Contains dma channel name for each DMA specifier in
+			the 'ti,navigator-dmas' property.
+
+Example:
+
+	netcp: netcp@2090000 {
+		..
+		ti,navigator-dmas = <&dma_gbe 22>,
+				<&dma_gbe 23>,
+				<&dma_gbe 8>;
+		ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+		..
+	};
diff --git a/Bindings/soc/ti/keystone-navigator-qmss.txt b/Bindings/soc/ti/keystone-navigator-qmss.txt
new file mode 100644
index 000000000000..d8e8cdb733f9
--- /dev/null
+++ b/Bindings/soc/ti/keystone-navigator-qmss.txt
@@ -0,0 +1,232 @@
+* Texas Instruments Keystone Navigator Queue Management SubSystem driver
+
+The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of
+the main hardware sub system which forms the backbone of the Keystone
+multi-core Navigator. QMSS consist of queue managers, packed-data structure
+processors(PDSP), linking RAM, descriptor pools and infrastructure
+Packet DMA.
+The Queue Manager is a hardware module that is responsible for accelerating
+management of the packet queues. Packets are queued/de-queued by writing or
+reading descriptor address to a particular memory mapped location. The PDSPs
+perform QMSS related functions like accumulation, QoS, or event management.
+Linking RAM registers are used to link the descriptors which are stored in
+descriptor RAM. Descriptor RAM is configurable as internal or external memory.
+The QMSS driver manages the PDSP setups, linking RAM regions,
+queue pool management (allocation, push, pop and notify) and descriptor
+pool management.
+
+
+Required properties:
+- compatible	: Must be "ti,keystone-navigator-qmss";
+- clocks	: phandle to the reference clock for this device.
+- queue-range	: <start number> total range of queue numbers for the device.
+- linkram0	: <address size> for internal link ram, where size is the total
+		  link ram entries.
+- linkram1	: <address size> for external link ram, where size is the total
+		  external link ram entries. If the address is specified as "0"
+		  driver will allocate memory.
+- qmgrs         : child node describing the individual queue managers on the
+		  SoC. On keystone 1 devices there should be only one node.
+		  On keystone 2 devices there can be more than 1 node.
+  -- managed-queues	: the actual queues managed by each queue manager
+			  instance, specified as <"base queue #" "# of queues">.
+  -- reg		: Address and size of the register set for the device.
+			  Register regions should be specified in the following
+			  order
+			  - Queue Peek region.
+			  - Queue status RAM.
+			  - Queue configuration region.
+			  - Descriptor memory setup region.
+			  - Queue Management/Queue Proxy region for queue Push.
+			  - Queue Management/Queue Proxy region for queue Pop.
+- queue-pools	: child node classifying the queue ranges into pools.
+		  Queue ranges are grouped into 3 type of pools:
+		  - qpend	    : pool of qpend(interruptible) queues
+		  - general-purpose : pool of general queues, primarly used
+				      as free descriptor queues or the
+				      transmit DMA queues.
+		  - accumulator	    : pool of queues on PDSP accumulator channel
+		  Each range can have the following properties:
+  -- qrange		: number of queues to use per queue range, specified as
+			  <"base queue #" "# of queues">.
+  -- interrupts		: Optional property to specify the interrupt mapping
+			  for interruptible queues. The driver additionaly sets
+			  the interrupt affinity hint based on the cpu mask.
+  -- qalloc-by-id	: Optional property to specify that the queues in this
+			  range can only be allocated by queue id.
+  -- accumulator	: Accumulator channel specification. Any of the PDSPs in
+			  QMSS can be loaded with the accumulator firmware. The
+			  accumulator firmware’s job is to poll a select number of
+			  queues looking for descriptors that have been pushed
+			  into them. Descriptors are popped from the queue and
+			  placed in a buffer provided by the host. When the list
+			  becomes full or a programmed time period expires, the
+			  accumulator triggers an interrupt to the host to read
+			  the buffer for descriptor information. This firmware
+			  comes in 16, 32, and 48 channel builds. Each of these
+			  channels can be configured to monitor 32 contiguous
+			  queues.  Accumulator channel property is specified as:
+			  <pdsp-id, channel, entries, pacing mode, latency>
+			  pdsp-id     : QMSS PDSP running accumulator firmware
+					on which the channel has to be
+					configured
+			  channel     : Accumulator channel number
+			  entries     : Size of the accumulator descriptor list
+			  pacing mode : Interrupt pacing mode
+					0 : None, i.e interrupt on list full only
+					1 : Time delay since last interrupt
+					2 : Time delay since first new packet
+					3 : Time delay since last new packet
+			  latency     : time to delay the interrupt, specified
+					in microseconds.
+  -- multi-queue	: Optional property to specify that the channel has to
+			  monitor upto 32 queues starting at the base queue #.
+- descriptor-regions	: child node describing the memory regions for keystone
+			  navigator packet DMA descriptors. The memory for
+			  descriptors will be allocated by the driver.
+  -- id				: region number in QMSS.
+  -- region-spec		: specifies the number of descriptors in the
+				  region, specified as
+				  <"# of descriptors" "descriptor size">.
+  -- link-index			: start index, i.e. index of the first
+				  descriptor in the region.
+
+Optional properties:
+- dma-coherent	: Present if DMA operations are coherent.
+- pdsps		: child node describing the PDSP configuration.
+  -- firmware		: firmware to be loaded on the PDSP.
+  -- id			: the qmss pdsp that will run the firmware.
+  -- reg		: Address and size of the register set for the PDSP.
+			  Register regions should be specified in the following
+			  order
+			  - PDSP internal RAM region.
+			  - PDSP control/status region registers.
+			  - QMSS interrupt distributor registers.
+			  - PDSP command interface region.
+
+Example:
+
+qmss: qmss@2a40000 {
+	compatible = "ti,keystone-qmss";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&chipclk13>;
+	ranges;
+	queue-range	= <0 0x4000>;
+	linkram0	= <0x100000 0x8000>;
+	linkram1	= <0x0 0x10000>;
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x2000>;
+			reg = <0x2a40000 0x20000>,
+			      <0x2a06000 0x400>,
+			      <0x2a02000 0x1000>,
+			      <0x2a03000 0x1000>,
+			      <0x23a80000 0x20000>,
+			      <0x2a80000 0x20000>;
+		};
+
+		qmgr1 {
+			managed-queues = <0x2000 0x2000>;
+			reg = <0x2a60000 0x20000>,
+			      <0x2a06400 0x400>,
+			      <0x2a04000 0x1000>,
+			      <0x2a05000 0x1000>,
+			      <0x23aa0000 0x20000>,
+			      <0x2aa0000 0x20000>;
+		};
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <658 8>;
+				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+					     0 43 0xf04 0 44 0xf04 0 45 0xf04
+					     0 46 0xf04 0 47 0xf04>;
+			};
+			qpend-1 {
+				qrange = <8704 16>;
+				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+					      0 51 0xf04 0 52 0xf04 0 53 0xf04
+					      0 54 0xf04 0 55 0xf04 0 56 0xf04
+					      0 57 0xf04 0 58 0xf04 0 59 0xf04
+					      0 60 0xf04 0 61 0xf04 0 62 0xf04
+					      0 63 0xf04>;
+				qalloc-by-id;
+			};
+			qpend-2 {
+				qrange = <8720 16>;
+				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+					      0 59 0xf04 0 68 0xf04 0 69 0xf04
+					      0 70 0xf04 0 71 0xf04 0 72 0xf04
+					      0 73 0xf04 0 74 0xf04 0 75 0xf04
+					      0 76 0xf04 0 77 0xf04 0 78 0xf04
+					      0 79 0xf04>;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <4000 64>;
+			};
+			netcp-tx {
+				qrange = <640 9>;
+				qalloc-by-id;
+			};
+		};
+		accumulator {
+			acc-0 {
+				qrange = <128 32>;
+				accumulator = <0 36 16 2 50>;
+				interrupts = <0 215 0xf01>;
+				multi-queue;
+				qalloc-by-id;
+			};
+			acc-1 {
+				qrange = <160 32>;
+				accumulator = <0 37 16 2 50>;
+				interrupts = <0 216 0xf01>;
+				multi-queue;
+			};
+			acc-2 {
+				qrange = <192 32>;
+				accumulator = <0 38 16 2 50>;
+				interrupts = <0 217 0xf01>;
+				multi-queue;
+			};
+			acc-3 {
+				qrange = <224 32>;
+				accumulator = <0 39 16 2 50>;
+				interrupts = <0 218 0xf01>;
+				multi-queue;
+			};
+		};
+	};
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <8192 128>; /* num_desc desc_size */
+			link-index = <0x4000>;
+		};
+	};
+	pdsps {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		pdsp0@0x2a10000 {
+			firmware = "keystone/qmss_pdsp_acc48_k2_le_1_0_0_8.fw";
+			reg = <0x2a10000 0x1000>,
+			      <0x2a0f000 0x100>,
+			      <0x2a0c000 0x3c8>,
+			      <0x2a20000 0x4000>;
+			id = <0>;
+		};
+	};
+}; /* qmss */
diff --git a/Bindings/sound/adi,axi-spdif-tx.txt b/Bindings/sound/adi,axi-spdif-tx.txt
index 46f344965313..4eb7997674a0 100644
--- a/Bindings/sound/adi,axi-spdif-tx.txt
+++ b/Bindings/sound/adi,axi-spdif-tx.txt
@@ -1,7 +1,7 @@
 ADI AXI-SPDIF controller
 
 Required properties:
- - compatible : Must be "adi,axi-spdif-1.00.a"
+ - compatible : Must be "adi,axi-spdif-tx-1.00.a"
  - reg : Must contain SPDIF core's registers location and length
  - clocks : Pairs of phandle and specifier referencing the controller's clocks.
    The controller expects two clocks, the clock used for the AXI interface and
diff --git a/Bindings/sound/adi,ssm2602.txt b/Bindings/sound/adi,ssm2602.txt
new file mode 100644
index 000000000000..3b3302fe399b
--- /dev/null
+++ b/Bindings/sound/adi,ssm2602.txt
@@ -0,0 +1,19 @@
+Analog Devices SSM2602, SSM2603 and SSM2604 I2S audio CODEC devices
+
+SSM2602 support both I2C and SPI as the configuration interface,
+the selection is made by the MODE strap-in pin.
+SSM2603 and SSM2604 only support I2C as the configuration interface.
+
+Required properties:
+
+  - compatible : One of "adi,ssm2602", "adi,ssm2603" or "adi,ssm2604"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+ Example:
+
+	ssm2602: ssm2602@1a {
+		compatible = "adi,ssm2602";
+		reg = <0x1a>;
+	};
diff --git a/Bindings/sound/arndale.txt b/Bindings/sound/arndale.txt
new file mode 100644
index 000000000000..0e76946385ae
--- /dev/null
+++ b/Bindings/sound/arndale.txt
@@ -0,0 +1,24 @@
+Audio Binding for Arndale boards
+
+Required properties:
+- compatible : Can be the following,
+			"samsung,arndale-rt5631"
+
+- samsung,audio-cpu: The phandle of the Samsung I2S controller
+- samsung,audio-codec: The phandle of the audio codec
+
+Optional:
+- samsung,model: The name of the sound-card
+
+Arndale Boards has many audio daughter cards, one of them is
+rt5631/alc5631. Below example shows audio bindings for rt5631/
+alc5631 based codec.
+
+Example:
+
+sound {
+		compatible = "samsung,arndale-rt5631";
+
+		samsung,audio-cpu = <&i2s0>
+		samsung,audio-codec = <&rt5631>;
+};
diff --git a/Bindings/sound/atmel_ac97c.txt b/Bindings/sound/atmel_ac97c.txt
new file mode 100644
index 000000000000..b151bd902ce3
--- /dev/null
+++ b/Bindings/sound/atmel_ac97c.txt
@@ -0,0 +1,20 @@
+* Atmel AC97 controller
+
+Required properties:
+  - compatible: "atmel,at91sam9263-ac97c"
+  - reg: Address and length of the register set for the device
+  - interrupts: Should contain AC97 interrupt
+  - ac97-gpios: Please refer to soc-ac97link.txt, only ac97-reset is used
+Optional properties:
+  - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound@fffa0000 {
+       compatible = "atmel,at91sam9263-ac97c";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ac97>;
+       reg = <0xfffa0000 0x4000>;
+       interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+
+       ac97-gpios = <&pioB 0 0 &pioB 2 0 &pioC 29 GPIO_ACTIVE_LOW>;
+};
diff --git a/Bindings/sound/cdns,xtfpga-i2s.txt b/Bindings/sound/cdns,xtfpga-i2s.txt
new file mode 100644
index 000000000000..befd125d18bb
--- /dev/null
+++ b/Bindings/sound/cdns,xtfpga-i2s.txt
@@ -0,0 +1,18 @@
+Bindings for I2S controller built into xtfpga Xtensa bitstreams.
+
+Required properties:
+- compatible: shall be "cdns,xtfpga-i2s".
+- reg: memory region (address and length) with device registers.
+- interrupts: interrupt for the device.
+- clocks: phandle to the clk used as master clock. I2S bus clock
+  is derived from it.
+
+Examples:
+
+	i2s0: xtfpga-i2s@0d080000 {
+		#sound-dai-cells = <0>;
+		compatible = "cdns,xtfpga-i2s";
+		reg = <0x0d080000 0x40>;
+		interrupts = <2 1>;
+		clocks = <&cdce706 4>;
+	};
diff --git a/Bindings/sound/cs35l32.txt b/Bindings/sound/cs35l32.txt
new file mode 100644
index 000000000000..1417d3f5cc22
--- /dev/null
+++ b/Bindings/sound/cs35l32.txt
@@ -0,0 +1,62 @@
+CS35L32 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs35l32"
+
+  - reg : the I2C address of the device for I2C. Address is determined by the level
+  of the AD0 pin. Level 0 is 0x40 while Level 1 is 0x41.
+
+  - VA-supply, VP-supply : power supplies for the device,
+  as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+  deasserted before communication to the codec starts.
+
+  - cirrus,boost-manager : Boost voltage control.
+  0 = Automatically managed.  Boost-converter output voltage is the higher
+  of the two: Class G or adaptive LED voltage.
+  1 = Automatically managed irrespective of audio, adapting for low-power
+  dissipation when LEDs are ON, and operating in Fixed-Boost Bypass Mode
+  if LEDs are OFF (VBST = VP).
+  2 = (Default) Boost voltage fixed in Bypass Mode (VBST = VP).
+  3 = Boost voltage fixed at 5 V.
+
+  - cirrus,sdout-datacfg : Data configuration for dual CS35L32 applications only.
+  Determines the data packed in a two-CS35L32 configuration.
+  0 = Left/right channels VMON[11:0], IMON[11:0], VPMON[7:0].
+  1 = Left/right channels VMON[11:0], IMON[11:0], STATUS.
+  2 = (Default) left/right channels VMON[15:0], IMON [15:0].
+  3 = Left/right channels VPMON[7:0], STATUS.
+
+  - cirrus,sdout-share : SDOUT sharing. Determines whether one or two CS35L32
+  devices are on board sharing SDOUT.
+  0 = (Default) One IC.
+  1 = Two IC's.
+
+  - cirrus,battery-recovery : Low battery nominal recovery threshold, rising VP.
+  0 = 3.1V
+  1 = 3.2V
+  2 = 3.3V (Default)
+  3 = 3.4V
+
+  - cirrus,battery-threshold : Low battery nominal threshold, falling VP.
+  0 = 3.1V
+  1 = 3.2V
+  2 = 3.3V
+  3 = 3.4V (Default)
+  4 = 3.5V
+  5 = 3.6V
+
+Example:
+
+codec: codec@40 {
+	compatible = "cirrus,cs35l32";
+	reg = <0x40>;
+	reset-gpios = <&gpio 10 0>;
+	cirrus,boost-manager = <0x03>;
+	cirrus,sdout-datacfg = <0x02>;
+	VA-supply = <&reg_audio>;
+};
diff --git a/Bindings/sound/davinci-mcasp-audio.txt b/Bindings/sound/davinci-mcasp-audio.txt
index 60ca07996458..46bc9829c71a 100644
--- a/Bindings/sound/davinci-mcasp-audio.txt
+++ b/Bindings/sound/davinci-mcasp-audio.txt
@@ -32,7 +32,7 @@ Optional properties:
 - rx-num-evt : FIFO levels.
 - sram-size-playback : size of sram to be allocated during playback
 - sram-size-capture  : size of sram to be allocated during capture
-- interrupts : Interrupt numbers for McASP, currently not used by the driver
+- interrupts : Interrupt numbers for McASP
 - interrupt-names : Known interrupt names are "tx" and "rx"
 - pinctrl-0: Should specify pin control group used for this controller.
 - pinctrl-names: Should contain only one value - "default", for more details
diff --git a/Bindings/sound/designware-i2s.txt b/Bindings/sound/designware-i2s.txt
new file mode 100644
index 000000000000..7bb54247f8e8
--- /dev/null
+++ b/Bindings/sound/designware-i2s.txt
@@ -0,0 +1,31 @@
+DesignWare I2S controller
+
+Required properties:
+ - compatible : Must be "snps,designware-i2s"
+ - reg : Must contain the I2S core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's
+   clocks. The controller expects one clock: the clock used as the sampling
+   rate reference clock sample.
+ - clock-names : "i2sclk" for the sample rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channels that are used by
+   the core. The core expects one or two dma channels: one for transmit and
+   one for receive.
+ - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
+properties please check:
+	* resource-names.txt
+	* clock/clock-bindings.txt
+	* dma/dma.txt
+
+Example:
+
+	soc_i2s: i2s@7ff90000 {
+		compatible = "snps,designware-i2s";
+		reg = <0x0 0x7ff90000 0x0 0x1000>;
+		clocks = <&scpi_i2sclk 0>;
+		clock-names = "i2sclk";
+		#sound-dai-cells = <0>;
+		dmas = <&dma0 5>;
+		dma-names = "tx";
+	};
diff --git a/Bindings/sound/es8328.txt b/Bindings/sound/es8328.txt
new file mode 100644
index 000000000000..30ea8a318ae9
--- /dev/null
+++ b/Bindings/sound/es8328.txt
@@ -0,0 +1,38 @@
+Everest ES8328 audio CODEC
+
+This device supports both I2C and SPI.
+
+Required properties:
+
+  - compatible : "everest,es8328"
+  - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V
+  - AVDD-supply : Regulator providing analog supply voltage 3.3V
+  - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V
+  - IPVDD-supply : Regulator providing analog output voltage 3.3V
+  - clocks : A 22.5792 or 11.2896 MHz clock
+  - reg : the I2C address of the device for I2C, the chip select number for SPI
+
+Pins on the device (for linking into audio routes):
+
+  * LOUT1
+  * LOUT2
+  * ROUT1
+  * ROUT2
+  * LINPUT1
+  * RINPUT1
+  * LINPUT2
+  * RINPUT2
+  * Mic Bias
+
+
+Example:
+
+codec: es8328@11 {
+	compatible = "everest,es8328";
+	DVDD-supply = <&reg_3p3v>;
+	AVDD-supply = <&reg_3p3v>;
+	PVDD-supply = <&reg_3p3v>;
+	HPVDD-supply = <&reg_3p3v>;
+	clocks = <&clks 169>;
+	reg = <0x11>;
+};
diff --git a/Bindings/sound/eukrea-tlv320.txt b/Bindings/sound/eukrea-tlv320.txt
index 0d7985c864af..6dfa88c4dc1e 100644
--- a/Bindings/sound/eukrea-tlv320.txt
+++ b/Bindings/sound/eukrea-tlv320.txt
@@ -1,11 +1,16 @@
 Audio complex for Eukrea boards with tlv320aic23 codec.
 
 Required properties:
-- compatible : "eukrea,asoc-tlv320"
-- eukrea,model : The user-visible name of this sound complex.
-- ssi-controller : The phandle of the SSI controller.
-- fsl,mux-int-port : The internal port of the i.MX audio muxer (AUDMUX).
-- fsl,mux-ext-port : The external port of the i.MX audio muxer.
+
+  - compatible		: "eukrea,asoc-tlv320"
+
+  - eukrea,model	: The user-visible name of this sound complex.
+
+  - ssi-controller	: The phandle of the SSI controller.
+
+  - fsl,mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX).
+
+  - fsl,mux-ext-port	: The external port of the i.MX audio muxer.
 
 Note: The AUDMUX port numbering should start at 1, which is consistent with
 hardware manual.
diff --git a/Bindings/sound/fsl,esai.txt b/Bindings/sound/fsl,esai.txt
index aeb8c4a0b88d..d3b6b5f48010 100644
--- a/Bindings/sound/fsl,esai.txt
+++ b/Bindings/sound/fsl,esai.txt
@@ -7,36 +7,39 @@ other DSPs. It has up to six transmitters and four receivers.
 
 Required properties:
 
-  - compatible : Compatible list, must contain "fsl,imx35-esai".
+  - compatible		: Compatible list, must contain "fsl,imx35-esai" or
+			  "fsl,vf610-esai"
 
-  - reg : Offset and length of the register set for the device.
+  - reg			: Offset and length of the register set for the device.
 
-  - interrupts : Contains the spdif interrupt.
+  - interrupts		: Contains the spdif interrupt.
 
-  - dmas : Generic dma devicetree binding as described in
-  Documentation/devicetree/bindings/dma/dma.txt.
+  - dmas		: Generic dma devicetree binding as described in
+			  Documentation/devicetree/bindings/dma/dma.txt.
 
-  - dma-names : Two dmas have to be defined, "tx" and "rx".
+  - dma-names		: Two dmas have to be defined, "tx" and "rx".
 
-  - clocks: Contains an entry for each entry in clock-names.
+  - clocks		: Contains an entry for each entry in clock-names.
 
-  - clock-names : Includes the following entries:
-	"core"		The core clock used to access registers
-	"extal"		The esai baud clock for esai controller used to derive
-			HCK, SCK and FS.
-	"fsys"		The system clock derived from ahb clock used to derive
-			HCK, SCK and FS.
+  - clock-names		: Includes the following entries:
+	"core"		  The core clock used to access registers
+	"extal"		  The esai baud clock for esai controller used to
+			  derive HCK, SCK and FS.
+	"fsys"		  The system clock derived from ahb clock used to
+			  derive HCK, SCK and FS.
 
-  - fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
-    This number is the maximum allowed value for TFCR[TFWM] or RFCR[RFWM].
+  - fsl,fifo-depth	: The number of elements in the transmit and receive
+			  FIFOs. This number is the maximum allowed value for
+			  TFCR[TFWM] or RFCR[RFWM].
 
   - fsl,esai-synchronous: This is a boolean property. If present, indicating
-    that ESAI would work in the synchronous mode, which means all the settings
-    for Receiving would be duplicated from Transmition related registers.
+			  that ESAI would work in the synchronous mode, which
+			  means all the settings for Receiving would be
+			  duplicated from Transmition related registers.
 
-  - big-endian : If this property is absent, the native endian mode will
-    be in use as default, or the big endian mode will be in use for all the
-    device registers.
+  - big-endian		: If this property is absent, the native endian mode
+			  will be in use as default, or the big endian mode
+			  will be in use for all the device registers.
 
 Example:
 
diff --git a/Bindings/sound/fsl,spdif.txt b/Bindings/sound/fsl,spdif.txt
index 3e9e82c8eab3..b5ee32ee3706 100644
--- a/Bindings/sound/fsl,spdif.txt
+++ b/Bindings/sound/fsl,spdif.txt
@@ -6,32 +6,31 @@ a fibre cable.
 
 Required properties:
 
-  - compatible : Compatible list, must contain "fsl,imx35-spdif".
+  - compatible		: Compatible list, must contain "fsl,imx35-spdif".
 
-  - reg : Offset and length of the register set for the device.
+  - reg			: Offset and length of the register set for the device.
 
-  - interrupts : Contains the spdif interrupt.
+  - interrupts		: Contains the spdif interrupt.
 
-  - dmas : Generic dma devicetree binding as described in
-  Documentation/devicetree/bindings/dma/dma.txt.
+  - dmas		: Generic dma devicetree binding as described in
+			  Documentation/devicetree/bindings/dma/dma.txt.
 
-  - dma-names : Two dmas have to be defined, "tx" and "rx".
+  - dma-names		: Two dmas have to be defined, "tx" and "rx".
 
-  - clocks : Contains an entry for each entry in clock-names.
+  - clocks		: Contains an entry for each entry in clock-names.
 
-  - clock-names : Includes the following entries:
-	"core"		The core clock of spdif controller
-	"rxtx<0-7>"	Clock source list for tx and rx clock.
-			This clock list should be identical to
-			the source list connecting to the spdif
-			clock mux in "SPDIF Transceiver Clock
-			Diagram" of SoC reference manual. It
-			can also be referred to TxClk_Source
-			bit of register SPDIF_STC.
+  - clock-names		: Includes the following entries:
+	"core"		  The core clock of spdif controller.
+	"rxtx<0-7>"	  Clock source list for tx and rx clock.
+			  This clock list should be identical to the source
+			  list connecting to the spdif clock mux in "SPDIF
+			  Transceiver Clock Diagram" of SoC reference manual.
+			  It can also be referred to TxClk_Source bit of
+			  register SPDIF_STC.
 
-   - big-endian : If this property is absent, the native endian mode will
-   be in use as default, or the big endian mode will be in use for all the
-   device registers.
+   - big-endian		: If this property is absent, the native endian mode
+			  will be in use as default, or the big endian mode
+			  will be in use for all the device registers.
 
 Example:
 
diff --git a/Bindings/sound/fsl,ssi.txt b/Bindings/sound/fsl,ssi.txt
index 3aa4a8f528f4..5b76be45d18b 100644
--- a/Bindings/sound/fsl,ssi.txt
+++ b/Bindings/sound/fsl,ssi.txt
@@ -58,13 +58,7 @@ Optional properties:
 		    Documentation/devicetree/bindings/dma/dma.txt.
 - dma-names:	    Two dmas have to be defined, "tx" and "rx", if fsl,imx-fiq
 		    is not defined.
-- fsl,mode:         The operating mode for the SSI interface.
-                    "i2s-slave" - I2S mode, SSI is clock slave
-                    "i2s-master" - I2S mode, SSI is clock master
-                    "lj-slave" - left-justified mode, SSI is clock slave
-                    "lj-master" - l.j. mode, SSI is clock master
-                    "rj-slave" - right-justified mode, SSI is clock slave
-                    "rj-master" - r.j., SSI is clock master
+- fsl,mode:         The operating mode for the AC97 interface only.
                     "ac97-slave" - AC97 mode, SSI is clock slave
                     "ac97-master" - AC97 mode, SSI is clock master
 
diff --git a/Bindings/sound/fsl-asoc-card.txt b/Bindings/sound/fsl-asoc-card.txt
new file mode 100644
index 000000000000..a96774c194c8
--- /dev/null
+++ b/Bindings/sound/fsl-asoc-card.txt
@@ -0,0 +1,82 @@
+Freescale Generic ASoC Sound Card with ASRC support
+
+The Freescale Generic ASoC Sound Card can be used, ideally, for all Freescale
+SoCs connecting with external CODECs.
+
+The idea of this generic sound card is a bit like ASoC Simple Card. However,
+for Freescale SoCs (especially those released in recent years), most of them
+have ASRC (Documentation/devicetree/bindings/sound/fsl,asrc.txt) inside. And
+this is a specific feature that might be painstakingly controlled and merged
+into the Simple Card.
+
+So having this generic sound card allows all Freescale SoC users to benefit
+from the simplification of a new card support and the capability of the wide
+sample rates support through ASRC.
+
+Note: The card is initially designed for those sound cards who use I2S and
+      PCM DAI formats. However, it'll be also possible to support those non
+      I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as long
+      as the driver has been properly upgraded.
+
+
+The compatible list for this generic sound card currently:
+ "fsl,imx-audio-cs42888"
+
+ "fsl,imx-audio-wm8962"
+ (compatible with Documentation/devicetree/bindings/sound/imx-audio-wm8962.txt)
+
+ "fsl,imx-audio-sgtl5000"
+ (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
+
+Required properties:
+
+  - compatible		: Contains one of entries in the compatible list.
+
+  - model		: The user-visible name of this sound complex
+
+  - audio-cpu		: The phandle of an CPU DAI controller
+
+  - audio-codec		: The phandle of an audio codec
+
+  - audio-routing	: A list of the connections between audio components.
+			  Each entry is a pair of strings, the first being the
+			  connection's sink, the second being the connection's
+			  source. There're a few pre-designed board connectors:
+			   * Line Out Jack
+			   * Line In Jack
+			   * Headphone Jack
+			   * Mic Jack
+			   * Ext Spk
+			   * AMIC (stands for Analog Microphone Jack)
+			   * DMIC (stands for Digital Microphone Jack)
+
+			  Note: The "Mic Jack" and "AMIC" are redundant while
+			        coexsiting in order to support the old bindings
+				of wm8962 and sgtl5000.
+
+Optional properties:
+
+  - audio-asrc		: The phandle of ASRC. It can be absent if there's no
+			  need to add ASRC support via DPCM.
+
+Example:
+sound-cs42888 {
+	compatible = "fsl,imx-audio-cs42888";
+	model = "cs42888-audio";
+	audio-cpu = <&esai>;
+	audio-asrc = <&asrc>;
+	audio-codec = <&cs42888>;
+	audio-routing =
+		"Line Out Jack", "AOUT1L",
+		"Line Out Jack", "AOUT1R",
+		"Line Out Jack", "AOUT2L",
+		"Line Out Jack", "AOUT2R",
+		"Line Out Jack", "AOUT3L",
+		"Line Out Jack", "AOUT3R",
+		"Line Out Jack", "AOUT4L",
+		"Line Out Jack", "AOUT4R",
+		"AIN1L", "Line In Jack",
+		"AIN1R", "Line In Jack",
+		"AIN2L", "Line In Jack",
+		"AIN2R", "Line In Jack";
+};
diff --git a/Bindings/sound/fsl-sai.txt b/Bindings/sound/fsl-sai.txt
index 0f4e23828190..044e5d76e2dd 100644
--- a/Bindings/sound/fsl-sai.txt
+++ b/Bindings/sound/fsl-sai.txt
@@ -5,25 +5,55 @@ which provides a synchronous audio interface that supports fullduplex
 serial interfaces with frame synchronization such as I2S, AC97, TDM, and
 codec/DSP interfaces.
 
-
 Required properties:
-- compatible: Compatible list, contains "fsl,vf610-sai" or "fsl,imx6sx-sai".
-- reg: Offset and length of the register set for the device.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names : Must include the "bus" for register access and "mclk1" "mclk2"
-  "mclk3" for bit clock and frame clock providing.
-- dmas : Generic dma devicetree binding as described in
-  Documentation/devicetree/bindings/dma/dma.txt.
-- dma-names : Two dmas have to be defined, "tx" and "rx".
-- pinctrl-names: Must contain a "default" entry.
-- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
-  See ../pinctrl/pinctrl-bindings.txt for details of the property values.
-- big-endian-regs: If this property is absent, the little endian mode will
-  be in use as default, or the big endian mode will be in use for all the
-  device registers.
-- big-endian-data: If this property is absent, the little endian mode will
-  be in use as default, or the big endian mode will be in use for all the
-  fifo data.
+
+  - compatible		: Compatible list, contains "fsl,vf610-sai" or
+			  "fsl,imx6sx-sai".
+
+  - reg			: Offset and length of the register set for the device.
+
+  - clocks		: Must contain an entry for each entry in clock-names.
+
+  - clock-names		: Must include the "bus" for register access and
+			  "mclk1", "mclk2", "mclk3" for bit clock and frame
+			  clock providing.
+  - dmas		: Generic dma devicetree binding as described in
+			  Documentation/devicetree/bindings/dma/dma.txt.
+
+  - dma-names		: Two dmas have to be defined, "tx" and "rx".
+
+  - pinctrl-names	: Must contain a "default" entry.
+
+  - pinctrl-NNN		: One property must exist for each entry in
+			  pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
+			  for details of the property values.
+
+  - big-endian		: Boolean property, required if all the FTM_PWM
+			  registers are big-endian rather than little-endian.
+
+  - lsb-first		: Configures whether the LSB or the MSB is transmitted
+			  first for the fifo data. If this property is absent,
+			  the MSB is transmitted first as default, or the LSB
+			  is transmitted first.
+
+  - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
+			  that SAI will work in the synchronous mode (sync Tx
+			  with Rx) which means both the transimitter and the
+			  receiver will send and receive data by following
+			  receiver's bit clocks and frame sync clocks.
+
+  - fsl,sai-asynchronous: This is a boolean property. If present, indicating
+			  that SAI will work in the asynchronous mode, which
+			  means both transimitter and receiver will send and
+			  receive data by following their own bit clocks and
+			  frame sync clocks separately.
+
+Note:
+- If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
+  default synchronous mode (sync Rx with Tx) will be used, which means both
+  transimitter and receiver will send and receive data by following clocks
+  of transimitter.
+- fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive.
 
 Example:
 sai2: sai@40031000 {
@@ -38,6 +68,6 @@ sai2: sai@40031000 {
 	      dma-names = "tx", "rx";
 	      dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
 		   <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
-	      big-endian-regs;
-	      big-endian-data;
+	      big-endian;
+	      lsb-first;
 };
diff --git a/Bindings/sound/imx-audio-es8328.txt b/Bindings/sound/imx-audio-es8328.txt
new file mode 100644
index 000000000000..07b68ab206fb
--- /dev/null
+++ b/Bindings/sound/imx-audio-es8328.txt
@@ -0,0 +1,60 @@
+Freescale i.MX audio complex with ES8328 codec
+
+Required properties:
+- compatible       : "fsl,imx-audio-es8328"
+- model            : The user-visible name of this sound complex
+- ssi-controller   : The phandle of the i.MX SSI controller
+- jack-gpio        : Optional GPIO for headphone jack
+- audio-amp-supply : Power regulator for speaker amps
+- audio-codec      : The phandle of the ES8328 audio codec
+- audio-routing    : A list of the connections between audio components.
+                     Each entry is a pair of strings, the first being the
+		     connection's sink, the second being the connection's
+		     source. Valid names could be power supplies, ES8328
+		     pins, and the jacks on the board:
+
+			Power supplies:
+			   * audio-amp
+
+			ES8328 pins:
+			   * LOUT1
+			   * LOUT2
+			   * ROUT1
+			   * ROUT2
+			   * LINPUT1
+			   * LINPUT2
+			   * RINPUT1
+			   * RINPUT2
+			   * Mic PGA
+
+			Board connectors:
+			   * Headphone
+			   * Speaker
+			   * Mic Jack
+- mux-int-port     : The internal port of the i.MX audio muxer (AUDMUX)
+- mux-ext-port     : The external port of the i.MX audio muxer (AUDMIX)
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+	compatible = "fsl,imx-audio-es8328";
+	model = "imx-audio-es8328";
+	ssi-controller = <&ssi1>;
+	audio-codec = <&codec>;
+	jack-gpio = <&gpio5 15 0>;
+	audio-amp-supply = <&reg_audio_amp>;
+	audio-routing =
+		"Speaker", "LOUT2",
+		"Speaker", "ROUT2",
+		"Speaker", "audio-amp",
+		"Headphone", "ROUT1",
+		"Headphone", "LOUT1",
+		"LINPUT1", "Mic Jack",
+		"RINPUT1", "Mic Jack",
+		"Mic Jack", "Mic Bias";
+	mux-int-port = <1>;
+	mux-ext-port = <3>;
+};
diff --git a/Bindings/sound/imx-audio-sgtl5000.txt b/Bindings/sound/imx-audio-sgtl5000.txt
index e4acdd891e49..2f89db88fd57 100644
--- a/Bindings/sound/imx-audio-sgtl5000.txt
+++ b/Bindings/sound/imx-audio-sgtl5000.txt
@@ -1,33 +1,40 @@
 Freescale i.MX audio complex with SGTL5000 codec
 
 Required properties:
-- compatible : "fsl,imx-audio-sgtl5000"
-- model : The user-visible name of this sound complex
-- ssi-controller : The phandle of the i.MX SSI controller
-- audio-codec : The phandle of the SGTL5000 audio codec
-- audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names could be power
-  supplies, SGTL5000 pins, and the jacks on the board:
-
-  Power supplies:
-   * Mic Bias
-
-  SGTL5000 pins:
-   * MIC_IN
-   * LINE_IN
-   * HP_OUT
-   * LINE_OUT
-
-  Board connectors:
-   * Mic Jack
-   * Line In Jack
-   * Headphone Jack
-   * Line Out Jack
-   * Ext Spk
-
-- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
-- mux-ext-port : The external port of the i.MX audio muxer
+
+  - compatible		: "fsl,imx-audio-sgtl5000"
+
+  - model		: The user-visible name of this sound complex
+
+  - ssi-controller	: The phandle of the i.MX SSI controller
+
+  - audio-codec		: The phandle of the SGTL5000 audio codec
+
+  - audio-routing	: A list of the connections between audio components.
+			  Each entry is a pair of strings, the first being the
+			  connection's sink, the second being the connection's
+			  source. Valid names could be power supplies, SGTL5000
+			  pins, and the jacks on the board:
+
+			  Power supplies:
+			   * Mic Bias
+
+			  SGTL5000 pins:
+			   * MIC_IN
+			   * LINE_IN
+			   * HP_OUT
+			   * LINE_OUT
+
+			  Board connectors:
+			   * Mic Jack
+			   * Line In Jack
+			   * Headphone Jack
+			   * Line Out Jack
+			   * Ext Spk
+
+  - mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX)
+
+  - mux-ext-port	: The external port of the i.MX audio muxer
 
 Note: The AUDMUX port numbering should start at 1, which is consistent with
 hardware manual.
diff --git a/Bindings/sound/imx-audio-spdif.txt b/Bindings/sound/imx-audio-spdif.txt
index 7d13479f9c3c..da84a442ccea 100644
--- a/Bindings/sound/imx-audio-spdif.txt
+++ b/Bindings/sound/imx-audio-spdif.txt
@@ -2,23 +2,25 @@ Freescale i.MX audio complex with S/PDIF transceiver
 
 Required properties:
 
-  - compatible : "fsl,imx-audio-spdif"
+  - compatible		: "fsl,imx-audio-spdif"
 
-  - model : The user-visible name of this sound complex
+  - model		: The user-visible name of this sound complex
 
-  - spdif-controller : The phandle of the i.MX S/PDIF controller
+  - spdif-controller	: The phandle of the i.MX S/PDIF controller
 
 
 Optional properties:
 
-  - spdif-out : This is a boolean property. If present, the transmitting
-    function of S/PDIF will be enabled, indicating there's a physical
-    S/PDIF out connector/jack on the board or it's connecting to some
-    other IP block, such as an HDMI encoder/display-controller.
+  - spdif-out		: This is a boolean property. If present, the
+			  transmitting function of S/PDIF will be enabled,
+			  indicating there's a physical S/PDIF out connector
+			  or jack on the board or it's connecting to some
+			  other IP block, such as an HDMI encoder or
+			  display-controller.
 
-  - spdif-in : This is a boolean property. If present, the receiving
-    function of S/PDIF will be enabled, indicating there's a physical
-    S/PDIF in connector/jack on the board.
+  - spdif-in		: This is a boolean property. If present, the receiving
+			  function of S/PDIF will be enabled, indicating there
+			  is a physical S/PDIF in connector/jack on the board.
 
 * Note: At least one of these two properties should be set in the DT binding.
 
diff --git a/Bindings/sound/imx-audio-wm8962.txt b/Bindings/sound/imx-audio-wm8962.txt
index f49450a87890..acea71bee34f 100644
--- a/Bindings/sound/imx-audio-wm8962.txt
+++ b/Bindings/sound/imx-audio-wm8962.txt
@@ -1,25 +1,32 @@
 Freescale i.MX audio complex with WM8962 codec
 
 Required properties:
-- compatible : "fsl,imx-audio-wm8962"
-- model : The user-visible name of this sound complex
-- ssi-controller : The phandle of the i.MX SSI controller
-- audio-codec : The phandle of the WM8962 audio codec
-- audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names could be power
-  supplies, WM8962 pins, and the jacks on the board:
-
-  Power supplies:
-   * Mic Bias
-
-  Board connectors:
-   * Mic Jack
-   * Headphone Jack
-   * Ext Spk
-
-- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
-- mux-ext-port : The external port of the i.MX audio muxer
+
+  - compatible		: "fsl,imx-audio-wm8962"
+
+  - model		: The user-visible name of this sound complex
+
+  - ssi-controller	: The phandle of the i.MX SSI controller
+
+  - audio-codec		: The phandle of the WM8962 audio codec
+
+  - audio-routing	: A list of the connections between audio components.
+			  Each entry is a pair of strings, the first being the
+			  connection's sink, the second being the connection's
+			  source. Valid names could be power supplies, WM8962
+			  pins, and the jacks on the board:
+
+			  Power supplies:
+			   * Mic Bias
+
+			  Board connectors:
+			   * Mic Jack
+			   * Headphone Jack
+			   * Ext Spk
+
+  - mux-int-port	: The internal port of the i.MX audio muxer (AUDMUX)
+
+  - mux-ext-port	: The external port of the i.MX audio muxer
 
 Note: The AUDMUX port numbering should start at 1, which is consistent with
 hardware manual.
diff --git a/Bindings/sound/imx-audmux.txt b/Bindings/sound/imx-audmux.txt
index f88a00e54c63..b30a737e209e 100644
--- a/Bindings/sound/imx-audmux.txt
+++ b/Bindings/sound/imx-audmux.txt
@@ -1,18 +1,24 @@
 Freescale Digital Audio Mux (AUDMUX) device
 
 Required properties:
-- compatible : "fsl,imx21-audmux" for AUDMUX version firstly used on i.MX21,
-  or "fsl,imx31-audmux" for the version firstly used on i.MX31.
-- reg : Should contain AUDMUX registers location and length
+
+  - compatible		: "fsl,imx21-audmux" for AUDMUX version firstly used
+			  on i.MX21, or "fsl,imx31-audmux" for the version
+			  firstly used on i.MX31.
+
+  - reg			: Should contain AUDMUX registers location and length.
 
 An initial configuration can be setup using child nodes.
 
 Required properties of optional child nodes:
-- fsl,audmux-port : Integer of the audmux port that is configured by this
-  child node.
-- fsl,port-config : List of configuration options for the specific port. For
-  imx31-audmux and above, it is a list of tuples <ptcr pdcr>. For
-  imx21-audmux it is a list of pcr values.
+
+  - fsl,audmux-port	: Integer of the audmux port that is configured by this
+			  child node.
+
+  - fsl,port-config	: List of configuration options for the specific port.
+			  For imx31-audmux and above, it is a list of tuples
+			  <ptcr pdcr>. For imx21-audmux it is a list of pcr
+			  values.
 
 Example:
 
diff --git a/Bindings/sound/ingenic,jz4740-i2s.txt b/Bindings/sound/ingenic,jz4740-i2s.txt
new file mode 100644
index 000000000000..b41433386e2f
--- /dev/null
+++ b/Bindings/sound/ingenic,jz4740-i2s.txt
@@ -0,0 +1,23 @@
+Ingenic JZ4740 I2S controller
+
+Required properties:
+- compatible : "ingenic,jz4740-i2s"
+- reg : I2S registers location and length
+- clocks : AIC and I2S PLL clock specifiers.
+- clock-names: "aic" and "i2s"
+- dmas: DMA controller phandle and DMA request line for I2S Tx and Rx channels
+- dma-names: Must be "tx" and "rx"
+
+Example:
+
+i2s: i2s@10020000 {
+	compatible = "ingenic,jz4740-i2s";
+	reg = <0x10020000 0x94>;
+
+	clocks = <&cgu JZ4740_CLK_AIC>, <&cgu JZ4740_CLK_I2SPLL>;
+	clock-names = "aic", "i2s";
+
+	dmas = <&dma 2>, <&dma 3>;
+	dma-names = "tx", "rx";
+
+};
diff --git a/Bindings/sound/max98090.txt b/Bindings/sound/max98090.txt
index c454e67f54bb..aa802a274520 100644
--- a/Bindings/sound/max98090.txt
+++ b/Bindings/sound/max98090.txt
@@ -16,6 +16,8 @@ Optional properties:
 
 - clock-names: Should be "mclk"
 
+- maxim,dmic-freq: Frequency at which to clock DMIC
+
 Pins on the device (for linking into audio routes):
 
   * MIC1
diff --git a/Bindings/sound/max98357a.txt b/Bindings/sound/max98357a.txt
new file mode 100644
index 000000000000..a7a149a236e5
--- /dev/null
+++ b/Bindings/sound/max98357a.txt
@@ -0,0 +1,14 @@
+Maxim MAX98357A audio DAC
+
+This node models the Maxim MAX98357A DAC.
+
+Required properties:
+- compatible   : "maxim,max98357a"
+- sdmode-gpios : GPIO specifier for the GPIO -> DAC SDMODE pin
+
+Example:
+
+max98357a {
+	compatible = "maxim,max98357a";
+	sdmode-gpios = <&qcom_pinmux 25 0>;
+};
diff --git a/Bindings/sound/nvidia,tegra-audio-max98090.txt b/Bindings/sound/nvidia,tegra-audio-max98090.txt
index 9c7c55c71370..c949abc2992f 100644
--- a/Bindings/sound/nvidia,tegra-audio-max98090.txt
+++ b/Bindings/sound/nvidia,tegra-audio-max98090.txt
@@ -25,6 +25,7 @@ Required properties:
 
 Optional properties:
 - nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
+- nvidia,mic-det-gpios : The GPIO that detect microphones are plugged in
 
 Example:
 
diff --git a/Bindings/sound/nvidia,tegra-audio-rt5677.txt b/Bindings/sound/nvidia,tegra-audio-rt5677.txt
new file mode 100644
index 000000000000..a4589cda214e
--- /dev/null
+++ b/Bindings/sound/nvidia,tegra-audio-rt5677.txt
@@ -0,0 +1,67 @@
+NVIDIA Tegra audio complex, with RT5677 CODEC
+
+Required properties:
+- compatible : "nvidia,tegra-audio-rt5677"
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - pll_a
+  - pll_a_out0
+  - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the RT5677's pins (as documented in its binding), and the jacks
+  on the board:
+
+  * Headphone
+  * Speaker
+  * Headset Mic
+  * Internal Mic 1
+  * Internal Mic 2
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
+  connected to the CODEC.
+- nvidia,audio-codec : The phandle of the RT5677 audio codec. This binding
+  assumes that AIF1 on the CODEC is connected to Tegra.
+
+Optional properties:
+- nvidia,hp-det-gpios : The GPIO that detects headphones are plugged in
+- nvidia,hp-en-gpios : The GPIO that enables headphone amplifier
+- nvidia,mic-present-gpios: The GPIO that mic jack is plugged in
+- nvidia,dmic-clk-en-gpios : The GPIO that gates DMIC clock signal
+
+Example:
+
+sound {
+	compatible = "nvidia,tegra-audio-rt5677-ryu",
+	        "nvidia,tegra-audio-rt5677";
+	nvidia,model = "NVIDIA Tegra Ryu";
+
+	nvidia,audio-routing =
+		"Headphone", "LOUT2",
+		"Headphone", "LOUT1",
+		"Headset Mic", "MICBIAS1",
+		"IN1P", "Headset Mic",
+		"IN1N", "Headset Mic",
+		"DMIC L1", "Internal Mic 1",
+		"DMIC R1", "Internal Mic 1",
+		"DMIC L2", "Internal Mic 2",
+		"DMIC R2", "Internal Mic 2",
+		"Speaker", "PDM1L",
+		"Speaker", "PDM1R";
+
+	nvidia,i2s-controller = <&tegra_i2s1>;
+	nvidia,audio-codec = <&rt5677>;
+
+	nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+	nvidia,mic-present-gpios = <&gpio TEGRA_GPIO(O, 5) GPIO_ACTIVE_LOW>;
+	nvidia,hp-en-gpios = <&rt5677 1 GPIO_ACTIVE_HIGH>;
+	nvidia,dmic-clk-en-gpios = <&rt5677 2 GPIO_ACTIVE_HIGH>;
+
+	clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+	         <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+	         <&tegra_car TEGRA124_CLK_EXTERN1>;
+	clock-names = "pll_a", "pll_a_out0", "mclk";
+};
diff --git a/Bindings/sound/nvidia,tegra30-ahub.txt b/Bindings/sound/nvidia,tegra30-ahub.txt
index 946e2ac46091..0e9a1895d7fb 100644
--- a/Bindings/sound/nvidia,tegra30-ahub.txt
+++ b/Bindings/sound/nvidia,tegra30-ahub.txt
@@ -1,7 +1,10 @@
 NVIDIA Tegra30 AHUB (Audio Hub)
 
 Required properties:
-- compatible : "nvidia,tegra30-ahub", "nvidia,tegra114-ahub", etc.
+- compatible : For Tegra30, must contain "nvidia,tegra30-ahub".  For Tegra114,
+  must contain "nvidia,tegra114-ahub".  For Tegra124, must contain
+  "nvidia,tegra124-ahub".  Otherwise, must contain "nvidia,<chip>-ahub",
+  plus at least one of the above, where <chip> is tegra132.
 - reg : Should contain the register physical address and length for each of
   the AHUB's register blocks.
   - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
diff --git a/Bindings/sound/nvidia,tegra30-hda.txt b/Bindings/sound/nvidia,tegra30-hda.txt
index b4730c2822bc..13e2ef496724 100644
--- a/Bindings/sound/nvidia,tegra30-hda.txt
+++ b/Bindings/sound/nvidia,tegra30-hda.txt
@@ -1,7 +1,9 @@
 NVIDIA Tegra30 HDA controller
 
 Required properties:
-- compatible : "nvidia,tegra30-hda"
+- compatible : For Tegra30, must contain "nvidia,tegra30-hda".  Otherwise,
+  must contain '"nvidia,<chip>-hda", "nvidia,tegra30-hda"', where <chip> is
+  tegra114, tegra124, or tegra132.
 - reg : Should contain the HDA registers location and length.
 - interrupts : The interrupt from the HDA controller.
 - clocks : Must contain an entry for each required entry in clock-names.
diff --git a/Bindings/sound/nvidia,tegra30-i2s.txt b/Bindings/sound/nvidia,tegra30-i2s.txt
index 0c113ffe3814..38caa936f6f8 100644
--- a/Bindings/sound/nvidia,tegra30-i2s.txt
+++ b/Bindings/sound/nvidia,tegra30-i2s.txt
@@ -1,7 +1,10 @@
 NVIDIA Tegra30 I2S controller
 
 Required properties:
-- compatible : "nvidia,tegra30-i2s"
+- compatible : For Tegra30, must contain "nvidia,tegra30-i2s".  For Tegra124,
+  must contain "nvidia,tegra124-i2s".  Otherwise, must contain
+  "nvidia,<chip>-i2s" plus at least one of the above, where <chip> is
+  tegra114 or tegra132.
 - reg : Should contain I2S registers location and length
 - clocks : Must contain one entry, for the module clock.
   See ../clocks/clock-bindings.txt for details.
diff --git a/Bindings/sound/pcm512x.txt b/Bindings/sound/pcm512x.txt
index faff75e64573..3aae3b41bd8e 100644
--- a/Bindings/sound/pcm512x.txt
+++ b/Bindings/sound/pcm512x.txt
@@ -5,7 +5,8 @@ on the board).
 
 Required properties:
 
-  - compatible : One of "ti,pcm5121" or "ti,pcm5122"
+  - compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141" or
+                 "ti,pcm5142"
 
   - reg : the I2C address of the device for I2C, the chip select
           number for SPI.
@@ -16,9 +17,16 @@ Required properties:
 Optional properties:
 
   - clocks : A clock specifier for the clock connected as SCLK.  If this
-    is absent the device will be configured to clock from BCLK.
+    is absent the device will be configured to clock from BCLK.  If pll-in
+    and pll-out are specified in addition to a clock, the device is
+    configured to accept clock input on a specified gpio pin.
 
-Example:
+  - pll-in, pll-out : gpio pins used to connect the pll using <1>
+    through <6>.  The device will be configured for clock input on the
+    given pll-in pin and PLL output on the given pll-out pin.  An
+    external connection from the pll-out pin to the SCLK pin is assumed.
+
+Examples:
 
 	pcm5122: pcm5122@4c {
 		compatible = "ti,pcm5122";
@@ -28,3 +36,17 @@ Example:
 		DVDD-supply = <&reg_1v8>;
 		CPVDD-supply = <&reg_3v3>;
 	};
+
+
+	pcm5142: pcm5142@4c {
+		compatible = "ti,pcm5142";
+		reg = <0x4c>;
+
+		AVDD-supply = <&reg_3v3_analog>;
+		DVDD-supply = <&reg_1v8>;
+		CPVDD-supply = <&reg_3v3>;
+
+		clocks = <&sck>;
+		pll-in = <3>;
+		pll-out = <6>;
+	};
diff --git a/Bindings/sound/renesas,fsi.txt b/Bindings/sound/renesas,fsi.txt
index c5be003f413e..0d0ab51105b0 100644
--- a/Bindings/sound/renesas,fsi.txt
+++ b/Bindings/sound/renesas,fsi.txt
@@ -1,11 +1,16 @@
 Renesas FSI
 
 Required properties:
-- compatible			: "renesas,sh_fsi2" or "renesas,sh_fsi"
+- compatible			: "renesas,fsi2-<soctype>",
+				  "renesas,sh_fsi2" or "renesas,sh_fsi" as
+				  fallback.
+				  Examples with soctypes are:
+				    - "renesas,fsi2-r8a7740" (R-Mobile A1)
+				    - "renesas,fsi2-sh73a0" (SH-Mobile AG5)
 - reg				: Should contain the register physical address and length
 - interrupts			: Should contain FSI interrupt
 
-- fsia,spdif-connection		: FSI is connected by S/PDFI
+- fsia,spdif-connection		: FSI is connected by S/PDIF
 - fsia,stream-mode-support	: FSI supports 16bit stream mode.
 - fsia,use-internal-clock	: FSI uses internal clock when master mode.
 
diff --git a/Bindings/sound/renesas,rsnd.txt b/Bindings/sound/renesas,rsnd.txt
index aa697abf337e..2dd690bc19cc 100644
--- a/Bindings/sound/renesas,rsnd.txt
+++ b/Bindings/sound/renesas,rsnd.txt
@@ -1,8 +1,12 @@
 Renesas R-Car sound
 
 Required properties:
-- compatible			: "renesas,rcar_sound-gen1" if generation1
+- compatible			: "renesas,rcar_sound-<soctype>", fallbacks
+				  "renesas,rcar_sound-gen1" if generation1, and
 				  "renesas,rcar_sound-gen2" if generation2
+				  Examples with soctypes are:
+				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
+				    - "renesas,rcar_sound-r8a7791" (R-Car M2-W)
 - reg				: Should contain the register physical address.
 				  required register is
 				   SRU/ADG/SSI      if generation1
@@ -35,9 +39,9 @@ DAI subnode properties:
 
 Example:
 
-rcar_sound: rcar_sound@0xffd90000 {
+rcar_sound: rcar_sound@ec500000 {
 	#sound-dai-cells = <1>;
-	compatible = "renesas,rcar_sound-gen2";
+	compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
 	reg =	<0 0xec500000 0 0x1000>, /* SCU */
 		<0 0xec5a0000 0 0x100>,  /* ADG */
 		<0 0xec540000 0 0x1000>, /* SSIU */
diff --git a/Bindings/sound/rockchip-i2s.txt b/Bindings/sound/rockchip-i2s.txt
index 6c55fcfe5e1d..9b82c20b306b 100644
--- a/Bindings/sound/rockchip-i2s.txt
+++ b/Bindings/sound/rockchip-i2s.txt
@@ -31,7 +31,7 @@ i2s@ff890000 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	dmas = <&pdma1 0>, <&pdma1 1>;
-	dma-names = "rx", "tx";
+	dma-names = "tx", "rx";
 	clock-names = "i2s_hclk", "i2s_clk";
 	clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
 };
diff --git a/Bindings/sound/rt5631.txt b/Bindings/sound/rt5631.txt
new file mode 100644
index 000000000000..92b986ca337b
--- /dev/null
+++ b/Bindings/sound/rt5631.txt
@@ -0,0 +1,48 @@
+ALC5631/RT5631 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "realtek,alc5631" or "realtek,rt5631"
+
+  - reg : the I2C address of the device.
+
+Pins on the device (for linking into audio routes):
+
+  * SPK_OUT_R_P
+  * SPK_OUT_R_N
+  * SPK_OUT_L_P
+  * SPK_OUT_L_N
+  * HP_OUT_L
+  * HP_OUT_R
+  * AUX_OUT2_LP
+  * AUX_OUT2_RN
+  * AUX_OUT1_LP
+  * AUX_OUT1_RN
+  * AUX_IN_L_JD
+  * AUX_IN_R_JD
+  * MONO_IN_P
+  * MONO_IN_N
+  * MIC1_P
+  * MIC1_N
+  * MIC2_P
+  * MIC2_N
+  * MONO_OUT_P
+  * MONO_OUT_N
+  * MICBIAS1
+  * MICBIAS2
+
+Example:
+
+alc5631: alc5631@1a {
+	compatible = "realtek,alc5631";
+	reg = <0x1a>;
+};
+
+or
+
+rt5631: rt5631@1a {
+	compatible = "realtek,rt5631";
+	reg = <0x1a>;
+};
diff --git a/Bindings/sound/rt5677.txt b/Bindings/sound/rt5677.txt
new file mode 100644
index 000000000000..740ff771aa8b
--- /dev/null
+++ b/Bindings/sound/rt5677.txt
@@ -0,0 +1,76 @@
+RT5677 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5677".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+- gpio-controller : Indicates this device is a GPIO controller.
+
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters (currently unused).
+
+Optional properties:
+
+- realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
+
+- realtek,in1-differential
+- realtek,in2-differential
+- realtek,lout1-differential
+- realtek,lout2-differential
+- realtek,lout3-differential
+  Boolean. Indicate MIC1/2 input and LOUT1/2/3 outputs are differential,
+  rather than single-ended.
+
+- realtek,gpio-config
+  Array of six 8bit elements that configures GPIO.
+    0 - floating (reset value)
+    1 - pull down
+    2 - pull up
+
+- realtek,jd1-gpio
+  Configures GPIO Mic Jack detection 1.
+  Select 0 ~ 3 as OFF, GPIO1, GPIO2 and GPIO3 respectively.
+
+- realtek,jd2-gpio
+- realtek,jd3-gpio
+  Configures GPIO Mic Jack detection 2 and 3.
+  Select 0 ~ 3 as OFF, GPIO4, GPIO5 and GPIO6 respectively.
+
+Pins on the device (for linking into audio routes):
+
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * MICBIAS1
+  * DMIC1
+  * DMIC2
+  * DMIC3
+  * DMIC4
+  * LOUT1
+  * LOUT2
+  * LOUT3
+
+Example:
+
+rt5677 {
+	compatible = "realtek,rt5677";
+	reg = <0x2c>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	realtek,pow-ldo2-gpio =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+	realtek,in1-differential = "true";
+	realtek,gpio-config = /bits/ 8  <0 0 0 0 0 2>;   /* pull up GPIO6 */
+	realtek,jd2-gpio = <3>;  /* Enables Jack detection for GPIO6 */
+};
diff --git a/Bindings/sound/samsung-i2s.txt b/Bindings/sound/samsung-i2s.txt
index 7386d444ada1..09e0e18591ae 100644
--- a/Bindings/sound/samsung-i2s.txt
+++ b/Bindings/sound/samsung-i2s.txt
@@ -6,10 +6,17 @@ Required SoC Specific Properties:
    - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S.
    - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with
      secondary fifo, s/w reset control and internal mux for root clk src.
-   - samsung,exynos5420-i2s: for 8/16/24bit multichannel(7.1) I2S with
-     secondary fifo, s/w reset control, internal mux for root clk src and
-     TDM support. TDM (Time division multiplexing) is to allow transfer of
-     multiple channel audio data on single data line.
+   - samsung,exynos5420-i2s: for 8/16/24bit multichannel(5.1) I2S for
+     playback, sterio channel capture, secondary fifo using internal
+     or external dma, s/w reset control, internal mux for root clk src
+     and 7.1 channel TDM support for playback. TDM (Time division multiplexing)
+     is to allow transfer of multiple channel audio data on single data line.
+   - samsung,exynos7-i2s: with all the available features of exynos5 i2s,
+     exynos7 I2S has 7.1 channel TDM support for capture, secondary fifo
+     with only external dma and more no.of root clk sampling frequencies.
+   - samsung,exynos7-i2s1: I2S1 on previous samsung platforms supports
+     stereo channels. exynos7 i2s1 upgraded to 5.1 multichannel with
+     slightly modified bit offsets.
 
 - reg: physical base address of the controller and length of memory mapped
   region.
@@ -26,6 +33,25 @@ Required SoC Specific Properties:
   "iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources of the root
   clk. i2s0 has internal mux to select the source of root clk and i2s1 and i2s2
   doesn't have any such mux.
+- #clock-cells: should be 1, this property must be present if the I2S device
+  is a clock provider in terms of the common clock bindings, described in
+  ../clock/clock-bindings.txt.
+- clock-output-names: from the common clock bindings, names of the CDCLK
+  I2S output clocks, suggested values are "i2s_cdclk0", "i2s_cdclk1",
+  "i2s_cdclk3" for the I2S0, I2S1, I2S2 devices recpectively.
+
+There are following clocks available at the I2S device nodes:
+ CLK_I2S_CDCLK    - the CDCLK (CODECLKO) gate clock,
+ CLK_I2S_RCLK_PSR - the RCLK prescaler divider clock (corresponding to the
+		    IISPSR register),
+ CLK_I2S_RCLK_SRC - the RCLKSRC mux clock (corresponding to RCLKSRC bit in
+		    IISMOD register).
+
+Refer to the SoC datasheet for availability of the above clocks.
+The CLK_I2S_RCLK_PSR and CLK_I2S_RCLK_SRC clocks are usually only available
+in the IIS Multi Audio Interface (I2S0).
+Note: Old DTs may not have the #clock-cells, clock-output-names properties
+and then not use the I2S node as a clock supplier.
 
 Optional SoC Specific Properties:
 
@@ -34,6 +60,7 @@ Optional SoC Specific Properties:
 - pinctrl-0: Should specify pin control groups used for this controller.
 - pinctrl-names: Should contain only one value - "default".
 
+
 Example:
 
 i2s0: i2s@03830000 {
@@ -47,6 +74,8 @@ i2s0: i2s@03830000 {
 		<&clock_audss EXYNOS_I2S_BUS>,
 		<&clock_audss EXYNOS_SCLK_I2S>;
 	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+	#clock-cells;
+	clock-output-names = "i2s_cdclk0";
 	samsung,idma-addr = <0x03000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2s0_bus>;
diff --git a/Bindings/sound/sgtl5000.txt b/Bindings/sound/sgtl5000.txt
index 955df60a118c..0e5e4eb3ef1b 100644
--- a/Bindings/sound/sgtl5000.txt
+++ b/Bindings/sound/sgtl5000.txt
@@ -7,10 +7,33 @@ Required properties:
 
 - clocks : the clock provider of SYS_MCLK
 
+- micbias-resistor-k-ohms : the bias resistor to be used in kOmhs
+	The resistor can take values of 2k, 4k or 8k.
+	If set to 0 it will be off.
+	If this node is not mentioned or if the value is unknown, then
+	micbias	resistor is set to 4K.
+
+- micbias-voltage-m-volts : the bias voltage to be used in mVolts
+	The voltage can take values from 1.25V to 3V by 250mV steps
+	If this node is not mentionned or the value is unknown, then
+	the value is set to 1.25V.
+
+- VDDA-supply : the regulator provider of VDDA
+
+- VDDIO-supply: the regulator provider of VDDIO
+
+Optional properties:
+
+- VDDD-supply : the regulator provider of VDDD
+
 Example:
 
 codec: sgtl5000@0a {
 	compatible = "fsl,sgtl5000";
 	reg = <0x0a>;
 	clocks = <&clks 150>;
+	micbias-resistor-k-ohms = <2>;
+	micbias-voltage-m-volts = <2250>;
+	VDDA-supply = <&reg_3p3v>;
+	VDDIO-supply = <&reg_3p3v>;
 };
diff --git a/Bindings/sound/simple-card.txt b/Bindings/sound/simple-card.txt
index c2e9841dfce4..73bf314f7240 100644
--- a/Bindings/sound/simple-card.txt
+++ b/Bindings/sound/simple-card.txt
@@ -17,6 +17,10 @@ Optional properties:
 					  source.
 - simple-audio-card,mclk-fs             : Multiplication factor between stream rate and codec
   					  mclk.
+- simple-audio-card,hp-det-gpio		: Reference to GPIO that signals when
+					  headphones are attached.
+- simple-audio-card,mic-det-gpio	: Reference to GPIO that signals when
+					  a microphone is attached.
 
 Optional subnodes:
 
@@ -71,6 +75,11 @@ Optional CPU/CODEC subnodes properties:
 					  it can be specified via "clocks" if system has
 					  clock node (= common clock), or "system-clock-frequency"
 					  (if system doens't support common clock)
+					  If a clock is specified, it is
+					  enabled with clk_prepare_enable()
+					  in dai startup() and disabled with
+					  clk_disable_unprepare() in dai
+					  shutdown().
 
 Example 1 - single DAI link:
 
diff --git a/Bindings/sound/ssm4567.txt b/Bindings/sound/ssm4567.txt
new file mode 100644
index 000000000000..ec3d9e7004b5
--- /dev/null
+++ b/Bindings/sound/ssm4567.txt
@@ -0,0 +1,15 @@
+Analog Devices SSM4567 audio amplifier
+
+This device supports I2C only.
+
+Required properties:
+  - compatible : Must be "adi,ssm4567"
+  - reg : the I2C address of the device. This will either be 0x34 (LR_SEL/ADDR connected to AGND),
+	0x35 (LR_SEL/ADDR connected to IOVDD) or 0x36 (LR_SEL/ADDR open).
+
+Example:
+
+	ssm4567: ssm4567@34 {
+		compatible = "adi,ssm4567";
+		reg = <0x34>;
+	};
diff --git a/Bindings/sound/st,sta32x.txt b/Bindings/sound/st,sta32x.txt
new file mode 100644
index 000000000000..255de3ae5b2f
--- /dev/null
+++ b/Bindings/sound/st,sta32x.txt
@@ -0,0 +1,92 @@
+STA32X audio CODEC
+
+The driver for this device only supports I2C.
+
+Required properties:
+
+  - compatible: "st,sta32x"
+  - reg: the I2C address of the device for I2C
+  - reset-gpios: a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the codec starts.
+
+  - power-down-gpios: a GPIO spec for the power down pin. If specified,
+		      it will be deasserted before communication to the codec
+		      starts.
+
+  - Vdda-supply: regulator spec, providing 3.3V
+  - Vdd3-supply: regulator spec, providing 3.3V
+  - Vcc-supply: regulator spec, providing 5V - 26V
+
+Optional properties:
+
+  -  st,output-conf: number, Selects the output configuration:
+	0: 2-channel (full-bridge) power, 2-channel data-out
+	1: 2 (half-bridge). 1 (full-bridge) on-board power
+	2: 2 Channel (Full-Bridge) Power, 1 Channel FFX
+	3: 1 Channel Mono-Parallel
+	If parameter is missing, mode 0 will be enabled.
+	This property has to be specified as '/bits/ 8' value.
+
+  -  st,ch1-output-mapping: Channel 1 output mapping
+  -  st,ch2-output-mapping: Channel 2 output mapping
+  -  st,ch3-output-mapping: Channel 3 output mapping
+	0: Channel 1
+	1: Channel 2
+	2: Channel 3
+	If parameter is missing, channel 1 is chosen.
+	This properties have to be specified as '/bits/ 8' values.
+
+  -  st,thermal-warning-recover:
+	If present, thermal warning recovery is enabled.
+
+  -  st,thermal-warning-adjustment:
+	If present, thermal warning adjustment is enabled.
+
+  -  st,fault-detect-recovery:
+	If present, then fault recovery will be enabled.
+
+  -  st,drop-compensation-ns: number
+	Only required for "st,ffx-power-output-mode" ==
+	"variable-drop-compensation".
+	Specifies the drop compensation in nanoseconds.
+	The value must be in the range of 0..300, and only
+	multiples of 20 are allowed. Default is 140ns.
+
+  -  st,max-power-use-mpcc:
+	If present, then MPCC bits are used for MPC coefficients,
+	otherwise standard MPC coefficients are used.
+
+  -  st,max-power-corr:
+	If present, power bridge correction for THD reduction near maximum
+	power output is enabled.
+
+  -  st,am-reduction-mode:
+	If present, FFX mode runs in AM reduction mode, otherwise normal
+	FFX mode is used.
+
+  -  st,odd-pwm-speed-mode:
+	If present, PWM speed mode run on odd speed mode (341.3 kHz) on all
+	channels. If not present, normal PWM spped mode (384 kHz) will be used.
+
+  -  st,invalid-input-detect-mute:
+	If present, automatic invalid input detect mute is enabled.
+
+Example:
+
+codec: sta32x@38 {
+	compatible = "st,sta32x";
+	reg = <0x1c>;
+	reset-gpios = <&gpio1 19 0>;
+	power-down-gpios = <&gpio1 16 0>;
+	st,output-conf = /bits/ 8  <0x3>;	// set output to 2-channel
+						// (full-bridge) power,
+						// 2-channel data-out
+	st,ch1-output-mapping = /bits/ 8 <0>;	// set channel 1 output ch 1
+	st,ch2-output-mapping = /bits/ 8 <0>;	// set channel 2 output ch 1
+	st,ch3-output-mapping = /bits/ 8 <0>;	// set channel 3 output ch 1
+	st,max-power-correction;		// enables power bridge
+						// correction for THD reduction
+						// near maximum power output
+	st,invalid-input-detect-mute;		// mute if no valid digital
+						// audio signal is provided.
+};
diff --git a/Bindings/sound/st,sta350.txt b/Bindings/sound/st,sta350.txt
index b7e71bf5caf4..307398ef2317 100644
--- a/Bindings/sound/st,sta350.txt
+++ b/Bindings/sound/st,sta350.txt
@@ -33,7 +33,7 @@ Optional properties:
 	0: Channel 1
 	1: Channel 2
 	2: Channel 3
-	If parameter is missing, channel 1 is choosen.
+	If parameter is missing, channel 1 is chosen.
 	This properties have to be specified as '/bits/ 8' values.
 
   -  st,thermal-warning-recover:
diff --git a/Bindings/sound/tlv320aic3x.txt b/Bindings/sound/tlv320aic3x.txt
index 5e6040c2c2e9..47a213c411ce 100644
--- a/Bindings/sound/tlv320aic3x.txt
+++ b/Bindings/sound/tlv320aic3x.txt
@@ -9,6 +9,7 @@ Required properties:
     "ti,tlv320aic33" - TLV320AIC33
     "ti,tlv320aic3007" - TLV320AIC3007
     "ti,tlv320aic3106" - TLV320AIC3106
+    "ti,tlv320aic3104" - TLV320AIC3104
 
 
 - reg - <int> -  I2C slave address
@@ -18,6 +19,7 @@ Optional properties:
 
 - gpio-reset - gpio pin number used for codec reset
 - ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
+				    - Not supported on tlv320aic3104
 - ai3x-micbias-vg - MicBias Voltage required.
 	1 - MICBIAS output is powered to 2.0V,
 	2 - MICBIAS output is powered to 2.5V,
@@ -36,7 +38,13 @@ CODEC output pins:
   * HPLCOM
   * HPRCOM
 
-CODEC input pins:
+CODEC input pins for TLV320AIC3104:
+  * MIC2L
+  * MIC2R
+  * LINE1L
+  * LINE1R
+
+CODEC input pins for other compatible codecs:
   * MIC3L
   * MIC3R
   * LINE1L
diff --git a/Bindings/sound/ts3a227e.txt b/Bindings/sound/ts3a227e.txt
new file mode 100644
index 000000000000..a836881d9608
--- /dev/null
+++ b/Bindings/sound/ts3a227e.txt
@@ -0,0 +1,31 @@
+Texas Instruments TS3A227E
+Autonomous Audio Accessory Detection and Configuration Switch
+
+The TS3A227E detect headsets of 3-ring and 4-ring standards and
+switches automatically to route the microphone correctly.  It also
+handles key press detection in accordance with the Android audio
+headset specification v1.0.
+
+Required properties:
+
+ - compatible:		Should contain "ti,ts3a227e".
+ - reg:			The i2c address. Should contain <0x3b>.
+ - interrupt-parent:	The parent interrupt controller
+ - interrupts:		Interrupt number for /INT pin from the 227e
+
+Optional properies:
+ - ti,micbias:   Intended MICBIAS voltage (datasheet section 9.6.7).
+      Select 0/1/2/3/4/5/6/7 to specify MACBIAS voltage
+      2.1V/2.2V/2.3V/2.4V/2.5V/2.6V/2.7V/2.8V
+      Default value is "1" (2.2V).
+
+Examples:
+
+	i2c {
+		ts3a227e@3b {
+			compatible = "ti,ts3a227e";
+			reg = <0x3b>;
+			interrupt-parent = <&gpio>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
diff --git a/Bindings/sound/wm8904.txt b/Bindings/sound/wm8904.txt
index e99f4097c83c..66bf261423b9 100644
--- a/Bindings/sound/wm8904.txt
+++ b/Bindings/sound/wm8904.txt
@@ -3,7 +3,7 @@ WM8904 audio CODEC
 This device supports I2C only.
 
 Required properties:
-  - compatible: "wlf,wm8904"
+  - compatible: "wlf,wm8904" or "wlf,wm8912"
   - reg: the I2C address of the device.
   - clock-names: "mclk"
   - clocks: reference to
diff --git a/Bindings/sound/wm8960.txt b/Bindings/sound/wm8960.txt
new file mode 100644
index 000000000000..2deb8a3da9c5
--- /dev/null
+++ b/Bindings/sound/wm8960.txt
@@ -0,0 +1,31 @@
+WM8960 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "wlf,wm8960"
+
+  - reg : the I2C address of the device.
+
+Optional properties:
+  - wlf,shared-lrclk: This is a boolean property. If present, the LRCM bit of
+	R24 (Additional control 2) gets set, indicating that ADCLRC and DACLRC pins
+	will be disabled only when ADC (Left and Right) and DAC (Left and Right)
+	are disabled.
+	When wm8960 works on synchronize mode and DACLRC pin is used to supply
+	frame clock, it will no frame clock for captrue unless enable DAC to enable
+	DACLRC pin. If shared-lrclk is present, no need to enable DAC for captrue.
+
+  - wlf,capless: This is a boolean property. If present, OUT3 pin will be
+	enabled and disabled together with HP_L and HP_R pins in response to jack
+	detect events.
+
+Example:
+
+codec: wm8960@1a {
+	compatible = "wlf,wm8960";
+	reg = <0x1a>;
+
+	wlf,shared-lrclk;
+};
diff --git a/Bindings/spi/fsl-imx-cspi.txt b/Bindings/spi/fsl-imx-cspi.txt
index 4256a6df9b79..aad527b357a0 100644
--- a/Bindings/spi/fsl-imx-cspi.txt
+++ b/Bindings/spi/fsl-imx-cspi.txt
@@ -7,6 +7,9 @@ Required properties:
 - interrupts : Should contain CSPI/eCSPI interrupt
 - fsl,spi-num-chipselects : Contains the number of the chipselect
 - cs-gpios : Specifies the gpio pins to be used for chipselects.
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+		Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
 
 Example:
 
@@ -19,4 +22,6 @@ ecspi@70010000 {
 	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */
 		   <&gpio3 25 0>; /* GPIO3_25 */
+	dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+	dma-names = "rx", "tx";
 };
diff --git a/Bindings/spi/nvidia,tegra114-spi.txt b/Bindings/spi/nvidia,tegra114-spi.txt
index 7ea701e07dc2..b785976fe98a 100644
--- a/Bindings/spi/nvidia,tegra114-spi.txt
+++ b/Bindings/spi/nvidia,tegra114-spi.txt
@@ -1,7 +1,9 @@
 NVIDIA Tegra114 SPI controller.
 
 Required properties:
-- compatible : should be "nvidia,tegra114-spi".
+- compatible : For Tegra114, must contain "nvidia,tegra114-spi".
+  Otherwise, must contain '"nvidia,<chip>-spi", "nvidia,tegra114-spi"' where
+  <chip> is tegra124, tegra132, or tegra210.
 - reg: Should contain SPI registers location and length.
 - interrupts: Should contain SPI interrupts.
 - clock-names : Must include the following entries:
diff --git a/Bindings/spi/sh-msiof.txt b/Bindings/spi/sh-msiof.txt
index f24baf3b6cc1..4c388bb2f0a2 100644
--- a/Bindings/spi/sh-msiof.txt
+++ b/Bindings/spi/sh-msiof.txt
@@ -6,8 +6,17 @@ Required properties:
 			 "renesas,sh-mobile-msiof" for SH Mobile series.
 			 Examples with soctypes are:
 			 "renesas,msiof-r8a7790" (R-Car H2)
-			 "renesas,msiof-r8a7791" (R-Car M2)
-- reg                  : Offset and length of the register set for the device
+			 "renesas,msiof-r8a7791" (R-Car M2-W)
+			 "renesas,msiof-r8a7792" (R-Car V2H)
+			 "renesas,msiof-r8a7793" (R-Car M2-N)
+			 "renesas,msiof-r8a7794" (R-Car E2)
+- reg                  : A list of offsets and lengths of the register sets for
+			 the device.
+			 If only one register set is present, it is to be used
+			 by both the CPU and the DMA engine.
+			 If two register sets are present, the first is to be
+			 used by the CPU, and the second is to be used by the
+			 DMA engine.
 - interrupt-parent     : The phandle for the interrupt controller that
 			 services interrupts for this device
 - interrupts           : Interrupt specifier
@@ -17,12 +26,32 @@ Required properties:
 Optional properties:
 - clocks               : Must contain a reference to the functional clock.
 - num-cs               : Total number of chip-selects (default is 1)
+- dmas                 : Must contain a list of two references to DMA
+			 specifiers, one for transmission, and one for
+			 reception.
+- dma-names            : Must contain a list of two DMA names, "tx" and "rx".
+- renesas,dtdl         : delay sync signal (setup) in transmit mode.
+			 Must contain one of the following values:
+			 0   (no bit delay)
+			 50  (0.5-clock-cycle delay)
+			 100 (1-clock-cycle delay)
+			 150 (1.5-clock-cycle delay)
+			 200 (2-clock-cycle delay)
+
+- renesas,syncdl       : delay sync signal (hold) in transmit mode.
+			 Must contain one of the following values:
+			 0   (no bit delay)
+			 50  (0.5-clock-cycle delay)
+			 100 (1-clock-cycle delay)
+			 150 (1.5-clock-cycle delay)
+			 200 (2-clock-cycle delay)
+			 300 (3-clock-cycle delay)
 
 Optional properties, deprecated for soctype-specific bindings:
 - renesas,tx-fifo-size : Overrides the default tx fifo size given in words
 			 (default is 64)
 - renesas,rx-fifo-size : Overrides the default rx fifo size given in words
-			 (default is 64, or 256 on R-Car H2 and M2)
+			 (default is 64, or 256 on R-Car Gen2)
 
 Pinctrl properties might be needed, too.  See
 Documentation/devicetree/bindings/pinctrl/renesas,*.
@@ -31,9 +60,11 @@ Example:
 
 	msiof0: spi@e6e20000 {
 		compatible = "renesas,msiof-r8a7791";
-		reg = <0 0xe6e20000 0 0x0064>;
+		reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
diff --git a/Bindings/spi/spi-davinci.txt b/Bindings/spi/spi-davinci.txt
index f80887bca0d6..12ecfe9e3599 100644
--- a/Bindings/spi/spi-davinci.txt
+++ b/Bindings/spi/spi-davinci.txt
@@ -1,5 +1,10 @@
 Davinci SPI controller device bindings
 
+Links on DM:
+Keystone 2 - http://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf
+dm644x - http://www.ti.com/lit/ug/sprue32a/sprue32a.pdf
+OMAP-L138/da830 - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
+
 Required properties:
 - #address-cells: number of cells required to define a chip select
 	address on the SPI bus. Should be set to 1.
@@ -24,6 +29,30 @@ Optional:
 	cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>;
 	where first three are internal CS and last two are GPIO CS.
 
+Optional properties for slave devices:
+SPI slave nodes can contain the following properties.
+Not all SPI Peripherals from Texas Instruments support this.
+Please check SPI peripheral documentation for a device before using these.
+
+- ti,spi-wdelay : delay between transmission of words
+	(SPIFMTn.WDELAY, SPIDAT1.WDEL) must be specified in number of SPI module
+	clock periods.
+
+	delay = WDELAY * SPI_module_clock_period + 2 * SPI_module_clock_period
+
+Below is timing diagram which shows functional meaning of
+"ti,spi-wdelay" parameter.
+
+             +-+ +-+ +-+ +-+ +-+                           +-+ +-+ +-+
+SPI_CLK      | | | | | | | | | |                           | | | | | |
+  +----------+ +-+ +-+ +-+ +-+ +---------------------------+ +-+ +-+ +-
+
+SPI_SOMI/SIMO+-----------------+                           +-----------
+  +----------+ word1           +---------------------------+word2
+             +-----------------+                           +-----------
+                                          WDELAY
+                                <-------------------------->
+
 Example of a NOR flash slave device (n25q032) connected to DaVinci
 SPI controller device over the SPI bus.
 
@@ -43,6 +72,7 @@ spi0:spi@20BF0000 {
 		compatible = "st,m25p32";
 		spi-max-frequency = <25000000>;
 		reg = <0>;
+		ti,spi-wdelay = <8>;
 
 		partition@0 {
 			label = "u-boot-spl";
diff --git a/Bindings/spi/spi-fsl-dspi.txt b/Bindings/spi/spi-fsl-dspi.txt
index 5376de40f10b..cbbe16ed3874 100644
--- a/Bindings/spi/spi-fsl-dspi.txt
+++ b/Bindings/spi/spi-fsl-dspi.txt
@@ -10,7 +10,12 @@ Required properties:
 - pinctrl-names: must contain a "default" entry.
 - spi-num-chipselects : the number of the chipselect signals.
 - bus-num : the slave chip chipselect signal number.
-- big-endian : if DSPI modudle is big endian, the bool will be set in node.
+
+Optional property:
+- big-endian: If present the dspi device's registers are implemented
+  in big endian mode, otherwise in native mode(same with CPU), for more
+  detail please see: Documentation/devicetree/bindings/regmap/regmap.txt.
+
 Example:
 
 dspi0@4002c000 {
diff --git a/Bindings/spi/spi-gpio.txt b/Bindings/spi/spi-gpio.txt
index 8a824be15754..a95603bcf6ff 100644
--- a/Bindings/spi/spi-gpio.txt
+++ b/Bindings/spi/spi-gpio.txt
@@ -8,8 +8,10 @@ Required properties:
  - gpio-sck: GPIO spec for the SCK line to use
  - gpio-miso: GPIO spec for the MISO line to use
  - gpio-mosi: GPIO spec for the MOSI line to use
- - cs-gpios: GPIOs to use for chipselect lines
- - num-chipselects: number of chipselect lines
+ - cs-gpios: GPIOs to use for chipselect lines.
+             Not needed if num-chipselects = <0>.
+ - num-chipselects: Number of chipselect lines. Should be <0> if a single device
+                    with no chip select is connected.
 
 Example:
 
diff --git a/Bindings/spi/spi-img-spfi.txt b/Bindings/spi/spi-img-spfi.txt
new file mode 100644
index 000000000000..c7dd50fb8eb2
--- /dev/null
+++ b/Bindings/spi/spi-img-spfi.txt
@@ -0,0 +1,37 @@
+IMG Synchronous Peripheral Flash Interface (SPFI) controller
+
+Required properties:
+- compatible: Must be "img,spfi".
+- reg: Must contain the base address and length of the SPFI registers.
+- interrupts: Must contain the SPFI interrupt.
+- clocks: Must contain an entry for each entry in clock-names.
+  See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+  - spfi: SPI operating clock
+  - sys: SPI system interface clock
+- dmas: Must contain an entry for each entry in dma-names.
+  See ../dma/dma.txt for details.
+- dma-names: Must include the following entries:
+  - rx
+  - tx
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+
+Optional properties:
+- img,supports-quad-mode: Should be set if the interface supports quad mode
+  SPI transfers.
+
+Example:
+
+spi@18100f00 {
+	compatible = "img,spfi";
+	reg = <0x18100f00 0x100>;
+	interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&spi_clk>, <&system_clk>;
+	clock-names = "spfi", "sys";
+	dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+	dma-names = "rx", "tx";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
diff --git a/Bindings/spi/spi-meson.txt b/Bindings/spi/spi-meson.txt
new file mode 100644
index 000000000000..bb52a86f3365
--- /dev/null
+++ b/Bindings/spi/spi-meson.txt
@@ -0,0 +1,22 @@
+Amlogic Meson SPI controllers
+
+* SPIFC (SPI Flash Controller)
+
+The Meson SPIFC is a controller optimized for communication with SPI
+NOR memories, without DMA support and a 64-byte unified transmit /
+receive buffer.
+
+Required properties:
+ - compatible: should be "amlogic,meson6-spifc"
+ - reg: physical base address and length of the controller registers
+ - clocks: phandle of the input clock for the baud rate generator
+ - #address-cells: should be 1
+ - #size-cells: should be 0
+
+	spi@c1108c80 {
+		compatible = "amlogic,meson6-spifc";
+		reg = <0xc1108c80 0x80>;
+		clocks = <&clk81>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
diff --git a/Bindings/spi/spi-orion.txt b/Bindings/spi/spi-orion.txt
index a3ff50fc76fb..50c3a3de61c1 100644
--- a/Bindings/spi/spi-orion.txt
+++ b/Bindings/spi/spi-orion.txt
@@ -1,7 +1,7 @@
 Marvell Orion SPI device
 
 Required properties:
-- compatible : should be "marvell,orion-spi".
+- compatible : should be "marvell,orion-spi" or "marvell,armada-370-spi".
 - reg : offset and length of the register set for the device
 - cell-index : Which of multiple SPI controllers is this.
 Optional properties:
diff --git a/Bindings/spi/spi-rockchip.txt b/Bindings/spi/spi-rockchip.txt
index 7bab35575817..467dec441c62 100644
--- a/Bindings/spi/spi-rockchip.txt
+++ b/Bindings/spi/spi-rockchip.txt
@@ -16,11 +16,15 @@ Required Properties:
 - clocks: Must contain an entry for each entry in clock-names.
 - clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
 			   the peripheral clock.
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Optional Properties:
+
 - dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
 		Documentation/devicetree/bindings/dma/dma.txt
 - dma-names: DMA request names should include "tx" and "rx" if present.
-- #address-cells: should be 1.
-- #size-cells: should be 0.
+
 
 Example:
 
diff --git a/Bindings/spi/spi-rspi.txt b/Bindings/spi/spi-rspi.txt
index d57d82a74054..8f4169f63936 100644
--- a/Bindings/spi/spi-rspi.txt
+++ b/Bindings/spi/spi-rspi.txt
@@ -11,7 +11,10 @@ Required properties:
 		        - "renesas,rspi-sh7757" (SH)
 			- "renesas,rspi-r7s72100" (RZ/A1H)
 			- "renesas,qspi-r8a7790" (R-Car H2)
-			- "renesas,qspi-r8a7791" (R-Car M2)
+			- "renesas,qspi-r8a7791" (R-Car M2-W)
+			- "renesas,qspi-r8a7792" (R-Car V2H)
+			- "renesas,qspi-r8a7793" (R-Car M2-N)
+			- "renesas,qspi-r8a7794" (R-Car E2)
 - reg              : Address start and address range size of the device
 - interrupts       : A list of interrupt-specifiers, one for each entry in
 		     interrupt-names.
@@ -30,6 +33,9 @@ Required properties:
 
 Optional properties:
 - clocks           : Must contain a reference to the functional clock.
+- dmas             : Must contain a list of two references to DMA specifiers,
+		     one for transmission, and one for reception.
+- dma-names        : Must contain a list of two DMA names, "tx" and "rx".
 
 Pinctrl properties might be needed, too.  See
 Documentation/devicetree/bindings/pinctrl/renesas,*.
@@ -58,4 +64,6 @@ Examples:
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+		dma-names = "tx", "rx";
 	};
diff --git a/Bindings/spi/spi-samsung.txt b/Bindings/spi/spi-samsung.txt
index 1e8a8578148f..6dbdeb3c361a 100644
--- a/Bindings/spi/spi-samsung.txt
+++ b/Bindings/spi/spi-samsung.txt
@@ -9,7 +9,7 @@ Required SoC Specific Properties:
     - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms
     - samsung,s3c6410-spi: for s3c6410 platforms
     - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms
-    - samsung,exynos4210-spi: for exynos4 and exynos5 platforms
+    - samsung,exynos7-spi: for exynos7 platforms
 
 - reg: physical base address of the controller and length of memory mapped
   region.
diff --git a/Bindings/spi/spi-sirf.txt b/Bindings/spi/spi-sirf.txt
new file mode 100644
index 000000000000..4c7adb8f777c
--- /dev/null
+++ b/Bindings/spi/spi-sirf.txt
@@ -0,0 +1,41 @@
+* CSR SiRFprimaII Serial Peripheral Interface
+
+Required properties:
+- compatible : Should be "sirf,prima2-spi"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain SPI interrupt
+- resets: phandle to the reset controller asserting this device in
+          reset
+  See ../reset/reset.txt for details.
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+
+- #address-cells: Number of cells required to define a chip select
+                  address on the SPI bus. Should be set to 1.
+- #size-cells:    Should be zero.
+
+Optional properties:
+- spi-max-frequency: Specifies maximum SPI clock frequency,
+                     Units - Hz. Definition as per
+                     Documentation/devicetree/bindings/spi/spi-bus.txt
+- cs-gpios:     should specify GPIOs used for chipselects.
+
+Example:
+
+spi0: spi@b00d0000 {
+	compatible = "sirf,prima2-spi";
+	reg = <0xb00d0000 0x10000>;
+	interrupts = <15>;
+	dmas = <&dmac1 9>,
+		<&dmac1 4>;
+	dma-names = "rx", "tx";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clocks = <&clks 19>;
+	resets = <&rstc 26>;
+};
diff --git a/Bindings/spi/spi-st-ssc.txt b/Bindings/spi/spi-st-ssc.txt
new file mode 100644
index 000000000000..fe54959ec957
--- /dev/null
+++ b/Bindings/spi/spi-st-ssc.txt
@@ -0,0 +1,40 @@
+STMicroelectronics SSC (SPI) Controller
+---------------------------------------
+
+Required properties:
+- compatible	: "st,comms-ssc4-spi"
+- reg		: Offset and length of the device's register set
+- interrupts	: The interrupt specifier
+- clock-names	: Must contain "ssc"
+- clocks	: Must contain an entry for each name in clock-names
+		    See ../clk/*
+- pinctrl-names	: Uses "default", can use "sleep" if provided
+		    See ../pinctrl/pinctrl-binding.txt
+
+Optional properties:
+- cs-gpios	: List of GPIO chip selects
+		    See ../spi/spi-bus.txt
+
+Child nodes represent devices on the SPI bus
+  See ../spi/spi-bus.txt
+
+Example:
+	spi@9840000 {
+		compatible	= "st,comms-ssc4-spi";
+		reg		= <0x9840000 0x110>;
+		interrupts	= <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		clocks		= <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+		clock-names	= "ssc";
+		pinctrl-0	= <&pinctrl_spi0_default>;
+		pinctrl-names	= "default";
+		cs-gpios	= <&pio17 5 0>;
+		#address-cells	= <1>;
+		#size-cells	= <0>;
+
+		st95hf@0{
+			compatible		= "st,st95hf";
+			reg			= <0>;
+			spi-max-frequency	= <1000000>;
+			interrupts		= <2 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
diff --git a/Bindings/staging/iio/adc/mxs-lradc.txt b/Bindings/staging/iio/adc/mxs-lradc.txt
index ee05dc390694..307537787574 100644
--- a/Bindings/staging/iio/adc/mxs-lradc.txt
+++ b/Bindings/staging/iio/adc/mxs-lradc.txt
@@ -12,9 +12,9 @@ Optional properties:
                                property is not present, then the touchscreen is
                                disabled. 5 wires is valid for i.MX28 SoC only.
 - fsl,ave-ctrl: number of samples per direction to calculate an average value.
-                Allowed value is 1 ... 31, default is 4
+                Allowed value is 1 ... 32, default is 4
 - fsl,ave-delay: delay between consecutive samples. Allowed value is
-                 1 ... 2047. It is used if 'fsl,ave-ctrl' > 1, counts at
+                 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at
                  2 kHz and its default is 2 (= 1 ms)
 - fsl,settling: delay between plate switch to next sample. Allowed value is
                 1 ... 2047. It counts at 2 kHz and its default is
diff --git a/Bindings/submitting-patches.txt b/Bindings/submitting-patches.txt
index 042a0273b8ba..56742bc70218 100644
--- a/Bindings/submitting-patches.txt
+++ b/Bindings/submitting-patches.txt
@@ -12,6 +12,32 @@ I. For patch submitters
 
        devicetree@vger.kernel.org
 
+  3) The Documentation/ portion of the patch should come in the series before
+     the code implementing the binding.
+
+  4) Any compatible strings used in a chip or board DTS file must be
+     previously documented in the corresponding DT binding text file
+     in Documentation/devicetree/bindings.  This rule applies even if
+     the Linux device driver does not yet match on the compatible
+     string.  [ checkpatch will emit warnings if this step is not
+     followed as of commit bff5da4335256513497cc8c79f9a9d1665e09864
+     ("checkpatch: add DT compatible string documentation checks"). ]
+
+  5) The wildcard "<chip>" may be used in compatible strings, as in
+     the following example:
+
+         - compatible: Must contain '"nvidia,<chip>-pcie",
+           "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ...
+
+     As in the above example, the known values of "<chip>" should be
+     documented if it is used.
+
+  6) If a documented compatible string is not yet matched by the
+     driver, the documentation should also include a compatible
+     string that is matched by the driver (as in the "nvidia,tegra20-pcie"
+     example above).
+
+
 II. For kernel maintainers
 
   1) If you aren't comfortable reviewing a given binding, reply to it and ask
diff --git a/Bindings/thermal/armada-thermal.txt b/Bindings/thermal/armada-thermal.txt
index 4cf024929a3f..4698e0edc205 100644
--- a/Bindings/thermal/armada-thermal.txt
+++ b/Bindings/thermal/armada-thermal.txt
@@ -5,17 +5,9 @@ Required properties:
 - compatible:	Should be set to one of the following:
 		marvell,armada370-thermal
 		marvell,armada375-thermal
-		marvell,armada375-z1-thermal
 		marvell,armada380-thermal
 		marvell,armadaxp-thermal
 
-		Note: As the name suggests, "marvell,armada375-z1-thermal"
-		applies for the SoC Z1 stepping only. On such stepping
-		some quirks need to be done and the register offset differs
-		from the one in the A0 stepping.
-		The operating system may auto-detect the SoC stepping and
-		update the compatible and register offsets at runtime.
-
 - reg:		Device's register space.
 		Two entries are expected, see the examples below.
 		The first one is required for the sensor register;
diff --git a/Bindings/thermal/exynos-thermal.txt b/Bindings/thermal/exynos-thermal.txt
index ae738f562acc..695150a4136b 100644
--- a/Bindings/thermal/exynos-thermal.txt
+++ b/Bindings/thermal/exynos-thermal.txt
@@ -12,6 +12,7 @@
 	       "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
 			Exynos5420 (Must pass triminfo base and triminfo clock)
 	       "samsung,exynos5440-tmu"
+	       "samsung,exynos7-tmu"
 - interrupt-parent : The phandle for the interrupt controller
 - reg : Address range of the thermal registers. For soc's which has multiple
 	instances of TMU and some registers are shared across all TMU's like
@@ -32,13 +33,28 @@
 - clocks : The main clocks for TMU device
 	-- 1. operational clock for TMU channel
 	-- 2. optional clock to access the shared registers of TMU channel
+	-- 3. optional special clock for functional operation
 - clock-names : Thermal system clock name
 	-- "tmu_apbif" operational clock for current TMU channel
 	-- "tmu_triminfo_apbif" clock to access the shared triminfo register
 		for current TMU channel
+	-- "tmu_sclk" clock for functional operation of the current TMU
+		channel
 - vtmu-supply: This entry is optional and provides the regulator node supplying
 		voltage to TMU. If needed this entry can be placed inside
 		board/platform specific dts file.
+Following properties are mandatory (depending on SoC):
+- samsung,tmu_gain: Gain value for internal TMU operation.
+- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage
+- samsung,tmu_noise_cancel_mode: Mode for noise cancellation
+- samsung,tmu_efuse_value: Default level of temperature - it is needed when
+			   in factory fusing produced wrong value
+- samsung,tmu_min_efuse_value: Minimum temperature fused value
+- samsung,tmu_max_efuse_value: Maximum temperature fused value
+- samsung,tmu_first_point_trim: First point trimming value
+- samsung,tmu_second_point_trim: Second point trimming value
+- samsung,tmu_default_temp_offset: Default temperature offset
+- samsung,tmu_cal_type: Callibration type
 
 Example 1):
 
@@ -51,6 +67,7 @@ Example 1):
 		clock-names = "tmu_apbif";
 		status = "disabled";
 		vtmu-supply = <&tmu_regulator_node>;
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 Example 2):
@@ -61,6 +78,7 @@ Example 2):
 		interrupts = <0 58 0>;
 		clocks = <&clock 21>;
 		clock-names = "tmu_apbif";
+		#include "exynos5440-tmu-sensor-conf.dtsi"
 	};
 
 Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
@@ -70,6 +88,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
 		interrupts = <0 184 0>;
 		clocks = <&clock 318>, <&clock 318>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_cpu3: tmu@1006c000 {
@@ -78,6 +97,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
 		interrupts = <0 185 0>;
 		clocks = <&clock 318>, <&clock 319>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 	tmu_gpu: tmu@100a0000 {
@@ -86,6 +106,7 @@ Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
 		interrupts = <0 215 0>;
 		clocks = <&clock 319>, <&clock 318>;
 		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
 Note: For multi-instance tmu each instance should have an alias correctly
diff --git a/Bindings/thermal/imx-thermal.txt b/Bindings/thermal/imx-thermal.txt
index 1f0f67234a91..3c67bd50aa10 100644
--- a/Bindings/thermal/imx-thermal.txt
+++ b/Bindings/thermal/imx-thermal.txt
@@ -1,7 +1,10 @@
 * Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
 
 Required properties:
-- compatible : "fsl,imx6q-thermal"
+- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for i.MX6SX.
+  i.MX6SX has two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
+  when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature
+  is higher than panic threshold, system will auto reboot by SRC module.
 - fsl,tempmon : phandle pointer to system controller that contains TEMPMON
   control registers, e.g. ANATOP on imx6q.
 - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
diff --git a/Bindings/thermal/rcar-thermal.txt b/Bindings/thermal/rcar-thermal.txt
index 0ef00be44b01..43404b197933 100644
--- a/Bindings/thermal/rcar-thermal.txt
+++ b/Bindings/thermal/rcar-thermal.txt
@@ -7,7 +7,10 @@ Required properties:
 			    - "renesas,thermal-r8a73a4" (R-Mobile AP6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
 			    - "renesas,thermal-r8a7790" (R-Car H2)
-			    - "renesas,thermal-r8a7791" (R-Car M2)
+			    - "renesas,thermal-r8a7791" (R-Car M2-W)
+			    - "renesas,thermal-r8a7792" (R-Car V2H)
+			    - "renesas,thermal-r8a7793" (R-Car M2-N)
+			    - "renesas,thermal-r8a7794" (R-Car E2)
 - reg			: Address range of the thermal registers.
 			  The 1st reg will be recognized as common register
 			  if it has "interrupts".
diff --git a/Bindings/thermal/rockchip-thermal.txt b/Bindings/thermal/rockchip-thermal.txt
new file mode 100644
index 000000000000..ef802de4957a
--- /dev/null
+++ b/Bindings/thermal/rockchip-thermal.txt
@@ -0,0 +1,68 @@
+* Temperature Sensor ADC (TSADC) on rockchip SoCs
+
+Required properties:
+- compatible : "rockchip,rk3288-tsadc"
+- reg : physical base address of the controller and length of memory mapped
+	region.
+- interrupts : The interrupt number to the cpu. The interrupt specifier format
+	       depends on the interrupt controller.
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Shall be "tsadc" for the converter-clock, and "apb_pclk" for
+		the peripheral clock.
+- resets : Must contain an entry for each entry in reset-names.
+	   See ../reset/reset.txt for details.
+- reset-names : Must include the name "tsadc-apb".
+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
+- rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value.
+- rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO.
+- rockchip,hw-tshut-polarity : The hardware-controlled active polarity 0:LOW
+			       1:HIGH.
+
+Exiample:
+tsadc: tsadc@ff280000 {
+	compatible = "rockchip,rk3288-tsadc";
+	reg = <0xff280000 0x100>;
+	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+	clock-names = "tsadc", "apb_pclk";
+	resets = <&cru SRST_TSADC>;
+	reset-names = "tsadc-apb";
+	pinctrl-names = "default";
+	pinctrl-0 = <&otp_out>;
+	#thermal-sensor-cells = <1>;
+	rockchip,hw-tshut-temp = <95000>;
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+};
+
+Example: referring to thermal sensors:
+thermal-zones {
+	cpu_thermal: cpu_thermal {
+		polling-delay-passive = <1000>; /* milliseconds */
+		polling-delay = <5000>; /* milliseconds */
+
+		/* sensor	ID */
+		thermal-sensors = <&tsadc	1>;
+
+		trips {
+			cpu_alert0: cpu_alert {
+				temperature = <70000>; /* millicelsius */
+				hysteresis = <2000>; /* millicelsius */
+				type = "passive";
+			};
+			cpu_crit: cpu_crit {
+				temperature = <90000>; /* millicelsius */
+				hysteresis = <2000>; /* millicelsius */
+				type = "critical";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				trip = <&cpu_alert0>;
+				cooling-device =
+				    <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+	};
+};
diff --git a/Bindings/thermal/tegra-soctherm.txt b/Bindings/thermal/tegra-soctherm.txt
new file mode 100644
index 000000000000..6b68cd150405
--- /dev/null
+++ b/Bindings/thermal/tegra-soctherm.txt
@@ -0,0 +1,55 @@
+Tegra124 SOCTHERM thermal management system
+
+The SOCTHERM IP block contains thermal sensors, support for polled
+or interrupt-based thermal monitoring, CPU and GPU throttling based
+on temperature trip points, and handling external overcurrent
+notifications. It is also used to manage emergency shutdown in an
+overheating situation.
+
+Required properties :
+- compatible : For Tegra124, must contain "nvidia,tegra124-soctherm".
+  For Tegra132, must contain "nvidia,tegra132-soctherm".
+  For Tegra210, must contain "nvidia,tegra210-soctherm".
+- reg : Should contain 1 entry:
+  - SOCTHERM register set
+- interrupts : Defines the interrupt used by SOCTHERM
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - tsensor
+  - soctherm
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - soctherm
+- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description
+    of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
+    list of valid values when referring to thermal sensors.
+
+
+Example :
+
+	soctherm@0,700e2000 {
+		compatible = "nvidia,tegra124-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x1000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+			<&tegra_car TEGRA124_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+
+		#thermal-sensor-cells = <1>;
+	};
+
+Example: referring to thermal sensors :
+
+       thermal-zones {
+                cpu {
+                        polling-delay-passive = <1000>;
+                        polling-delay = <1000>;
+
+                        thermal-sensors =
+                                <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+                };
+	};
diff --git a/Bindings/thermal/thermal.txt b/Bindings/thermal/thermal.txt
index f5db6b72a36f..29fe0bfae38e 100644
--- a/Bindings/thermal/thermal.txt
+++ b/Bindings/thermal/thermal.txt
@@ -251,24 +251,24 @@ ocp {
 };
 
 thermal-zones {
-	cpu-thermal: cpu-thermal {
+	cpu_thermal: cpu-thermal {
 		polling-delay-passive = <250>; /* milliseconds */
 		polling-delay = <1000>; /* milliseconds */
 
 		thermal-sensors = <&bandgap0>;
 
 		trips {
-			cpu-alert0: cpu-alert {
+			cpu_alert0: cpu-alert0 {
 				temperature = <90000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "active";
 			};
-			cpu-alert1: cpu-alert {
+			cpu_alert1: cpu-alert1 {
 				temperature = <100000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			cpu-crit: cpu-crit {
+			cpu_crit: cpu-crit {
 				temperature = <125000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "critical";
@@ -277,17 +277,17 @@ thermal-zones {
 
 		cooling-maps {
 			map0 {
-				trip = <&cpu-alert0>;
-				cooling-device = <&fan0 THERMAL_NO_LIMITS 4>;
+				trip = <&cpu_alert0>;
+				cooling-device = <&fan0 THERMAL_NO_LIMIT 4>;
 			};
 			map1 {
-				trip = <&cpu-alert1>;
-				cooling-device = <&fan0 5 THERMAL_NO_LIMITS>;
+				trip = <&cpu_alert1>;
+				cooling-device = <&fan0 5 THERMAL_NO_LIMIT>;
 			};
 			map2 {
-				trip = <&cpu-alert1>;
+				trip = <&cpu_alert1>;
 				cooling-device =
-				    <&cpu0 THERMAL_NO_LIMITS THERMAL_NO_LIMITS>;
+				    <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 			};
 		};
 	};
@@ -298,13 +298,13 @@ used to monitor the zone 'cpu-thermal' using its sole sensor. A fan
 device (fan0) is controlled via I2C bus 1, at address 0x48, and has ten
 different cooling states 0-9. It is used to remove the heat out of
 the thermal zone 'cpu-thermal' using its cooling states
-from its minimum to 4, when it reaches trip point 'cpu-alert0'
+from its minimum to 4, when it reaches trip point 'cpu_alert0'
 at 90C, as an example of active cooling. The same cooling device is used at
-'cpu-alert1', but from 5 to its maximum state. The cpu@0 device is also
+'cpu_alert1', but from 5 to its maximum state. The cpu@0 device is also
 linked to the same thermal zone, 'cpu-thermal', as a passive cooling device,
-using all its cooling states at trip point 'cpu-alert1',
+using all its cooling states at trip point 'cpu_alert1',
 which is a trip point at 100C. On the thermal zone 'cpu-thermal', at the
-temperature of 125C, represented by the trip point 'cpu-crit', the silicon
+temperature of 125C, represented by the trip point 'cpu_crit', the silicon
 is not reliable anymore.
 
 (b) - IC with several internal sensors
@@ -329,7 +329,7 @@ ocp {
 };
 
 thermal-zones {
-	cpu-thermal: cpu-thermal {
+	cpu_thermal: cpu-thermal {
 		polling-delay-passive = <250>; /* milliseconds */
 		polling-delay = <1000>; /* milliseconds */
 
@@ -338,12 +338,12 @@ thermal-zones {
 
 		trips {
 			/* each zone within the SoC may have its own trips */
-			cpu-alert: cpu-alert {
+			cpu_alert: cpu-alert {
 				temperature = <100000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			cpu-crit: cpu-crit {
+			cpu_crit: cpu-crit {
 				temperature = <125000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "critical";
@@ -356,7 +356,7 @@ thermal-zones {
 		};
 	};
 
-	gpu-thermal: gpu-thermal {
+	gpu_thermal: gpu-thermal {
 		polling-delay-passive = <120>; /* milliseconds */
 		polling-delay = <1000>; /* milliseconds */
 
@@ -365,12 +365,12 @@ thermal-zones {
 
 		trips {
 			/* each zone within the SoC may have its own trips */
-			gpu-alert: gpu-alert {
+			gpu_alert: gpu-alert {
 				temperature = <90000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			gpu-crit: gpu-crit {
+			gpu_crit: gpu-crit {
 				temperature = <105000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "critical";
@@ -383,7 +383,7 @@ thermal-zones {
 		};
 	};
 
-	dsp-thermal: dsp-thermal {
+	dsp_thermal: dsp-thermal {
 		polling-delay-passive = <50>; /* milliseconds */
 		polling-delay = <1000>; /* milliseconds */
 
@@ -392,12 +392,12 @@ thermal-zones {
 
 		trips {
 			/* each zone within the SoC may have its own trips */
-			dsp-alert: gpu-alert {
+			dsp_alert: dsp-alert {
 				temperature = <90000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			dsp-crit: gpu-crit {
+			dsp_crit: gpu-crit {
 				temperature = <135000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "critical";
@@ -457,7 +457,7 @@ ocp {
 };
 
 thermal-zones {
-	cpu-thermal: cpu-thermal {
+	cpu_thermal: cpu-thermal {
 		polling-delay-passive = <250>; /* milliseconds */
 		polling-delay = <1000>; /* milliseconds */
 
@@ -508,7 +508,7 @@ with many sensors and many cooling devices.
 	/*
 	 * An IC with several temperature sensor.
 	 */
-	adc-dummy: sensor@0x50 {
+	adc_dummy: sensor@0x50 {
 		...
 		#thermal-sensor-cells = <1>; /* sensor internal ID */
 	};
@@ -520,7 +520,7 @@ thermal-zones {
 		polling-delay = <2500>; /* milliseconds */
 
 				/* sensor       ID */
-		thermal-sensors = <&adc-dummy     4>;
+		thermal-sensors = <&adc_dummy     4>;
 
 		trips {
 			...
@@ -531,14 +531,14 @@ thermal-zones {
 		};
 	};
 
-	board-thermal: board-thermal {
+	board_thermal: board-thermal {
 		polling-delay-passive = <1000>; /* milliseconds */
 		polling-delay = <2500>; /* milliseconds */
 
 				/* sensor       ID */
-		thermal-sensors = <&adc-dummy     0>, /* pcb top edge */
-				  <&adc-dummy     1>, /* lcd */
-				  <&adc-dymmy     2>; /* back cover */
+		thermal-sensors = <&adc_dummy     0>, /* pcb top edge */
+				  <&adc_dummy     1>, /* lcd */
+				  <&adc_dummy     2>; /* back cover */
 		/*
 		 * An array of coefficients describing the sensor
 		 * linear relation. E.g.:
@@ -548,22 +548,22 @@ thermal-zones {
 
 		trips {
 			/* Trips are based on resulting linear equation */
-			cpu-trip: cpu-trip {
+			cpu_trip: cpu-trip {
 				temperature = <60000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			gpu-trip: gpu-trip {
+			gpu_trip: gpu-trip {
 				temperature = <55000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			}
-			lcd-trip: lcp-trip {
+			lcd_trip: lcp-trip {
 				temperature = <53000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "passive";
 			};
-			crit-trip: crit-trip {
+			crit_trip: crit-trip {
 				temperature = <68000>; /* millicelsius */
 				hysteresis = <2000>; /* millicelsius */
 				type = "critical";
@@ -572,17 +572,17 @@ thermal-zones {
 
 		cooling-maps {
 			map0 {
-				trip = <&cpu-trip>;
+				trip = <&cpu_trip>;
 				cooling-device = <&cpu0 0 2>;
 				contribution = <55>;
 			};
 			map1 {
-				trip = <&gpu-trip>;
+				trip = <&gpu_trip>;
 				cooling-device = <&gpu0 0 2>;
 				contribution = <20>;
 			};
 			map2 {
-				trip = <&lcd-trip>;
+				trip = <&lcd_trip>;
 				cooling-device = <&lcd0 5 10>;
 				contribution = <15>;
 			};
diff --git a/Bindings/timer/amlogic,meson6-timer.txt b/Bindings/timer/amlogic,meson6-timer.txt
new file mode 100644
index 000000000000..a092053f7902
--- /dev/null
+++ b/Bindings/timer/amlogic,meson6-timer.txt
@@ -0,0 +1,15 @@
+Amlogic Meson6 SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "amlogic,meson6-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupt of the first timer
+
+Example:
+
+timer@c1109940 {
+	compatible = "amlogic,meson6-timer";
+	reg = <0xc1109940 0x14>;
+	interrupts = <0 10 1>;
+};
diff --git a/Bindings/timer/digicolor-timer.txt b/Bindings/timer/digicolor-timer.txt
new file mode 100644
index 000000000000..d1b659bbc29f
--- /dev/null
+++ b/Bindings/timer/digicolor-timer.txt
@@ -0,0 +1,18 @@
+Conexant Digicolor SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "cnxt,cx92755-timer"
+- reg : Specifies base physical address and size of the "Agent Communication"
+  timer registers
+- interrupts : Contains 8 interrupts, one for each timer
+- clocks: phandle to the main clock
+
+Example:
+
+	timer@f0000fc0 {
+		compatible = "cnxt,cx92755-timer";
+		reg = <0xf0000fc0 0x40>;
+		interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>;
+		clocks = <&main_clk>;
+	};
diff --git a/Bindings/timer/marvell,armada-370-xp-timer.txt b/Bindings/timer/marvell,armada-370-xp-timer.txt
index f455182b1086..e9c78ce880e6 100644
--- a/Bindings/timer/marvell,armada-370-xp-timer.txt
+++ b/Bindings/timer/marvell,armada-370-xp-timer.txt
@@ -2,8 +2,10 @@ Marvell Armada 370 and Armada XP Timers
 ---------------------------------------
 
 Required properties:
-- compatible: Should be either "marvell,armada-370-timer" or
-  "marvell,armada-xp-timer" as appropriate.
+- compatible: Should be one of the following
+              "marvell,armada-370-timer",
+	      "marvell,armada-375-timer",
+	      "marvell,armada-xp-timer".
 - interrupts: Should contain the list of Global Timer interrupts and
   then local timer interrupts
 - reg: Should contain location and length for timers register. First
@@ -13,7 +15,8 @@ Required properties:
 Clocks required for compatible = "marvell,armada-370-timer":
 - clocks : Must contain a single entry describing the clock input
 
-Clocks required for compatible = "marvell,armada-xp-timer":
+Clocks required for compatibles = "marvell,armada-xp-timer",
+				  "marvell,armada-375-timer":
 - clocks : Must contain an entry for each entry in clock-names.
 - clock-names : Must include the following entries:
   "nbclk" (L2/coherency fabric clock),
diff --git a/Bindings/timer/nvidia,tegra30-timer.txt b/Bindings/timer/nvidia,tegra30-timer.txt
index b5082a1cf461..1761f53ee36f 100644
--- a/Bindings/timer/nvidia,tegra30-timer.txt
+++ b/Bindings/timer/nvidia,tegra30-timer.txt
@@ -6,7 +6,9 @@ trigger a legacy watchdog reset.
 
 Required properties:
 
-- compatible : should be "nvidia,tegra30-timer", "nvidia,tegra20-timer".
+- compatible : For Tegra30, must contain "nvidia,tegra30-timer".  Otherwise,
+  must contain '"nvidia,<chip>-timer", "nvidia,tegra30-timer"' where
+  <chip> is tegra124 or tegra132.
 - reg : Specifies base physical address and size of the registers.
 - interrupts : A list of 6 interrupts; one per each of timer channels 1
     through 5, and one for the shared interrupt for the remaining channels.
diff --git a/Bindings/timer/renesas,cmt.txt b/Bindings/timer/renesas,cmt.txt
index a17418b0ece3..1a05c1b243c1 100644
--- a/Bindings/timer/renesas,cmt.txt
+++ b/Bindings/timer/renesas,cmt.txt
@@ -11,15 +11,47 @@ datasheets.
 
 Required Properties:
 
-  - compatible: must contain one of the following.
-    - "renesas,cmt-32" for the 32-bit CMT
+  - compatible: must contain one or more of the following:
+    - "renesas,cmt-32-r8a7740" for the r8a7740 32-bit CMT
+		(CMT0)
+    - "renesas,cmt-32-sh7372" for the sh7372 32-bit CMT
+		(CMT0)
+    - "renesas,cmt-32-sh73a0" for the sh73a0 32-bit CMT
+		(CMT0)
+    - "renesas,cmt-32" for all 32-bit CMT without fast clock support
 		(CMT0 on sh7372, sh73a0 and r8a7740)
-    - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support
+		This is a fallback for the above renesas,cmt-32-* entries.
+
+    - "renesas,cmt-32-fast-r8a7740" for the r8a7740 32-bit CMT with fast
+		clock support (CMT[234])
+    - "renesas,cmt-32-fast-sh7372" for the sh7372 32-bit CMT with fast
+		clock support (CMT[234])
+    - "renesas,cmt-32-fast-sh73a0" for the sh73A0 32-bit CMT with fast
+		clock support (CMT[234])
+    - "renesas,cmt-32-fast" for all 32-bit CMT with fast clock support
 		(CMT[234] on sh7372, sh73a0 and r8a7740)
-    - "renesas,cmt-48" for the 48-bit CMT
+		This is a fallback for the above renesas,cmt-32-fast-* entries.
+
+    - "renesas,cmt-48-sh7372" for the sh7372 48-bit CMT
+		(CMT1)
+    - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT
+		(CMT1)
+    - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT
+		(CMT1)
+    - "renesas,cmt-48" for all non-second generation 48-bit CMT
 		(CMT1 on sh7372, sh73a0 and r8a7740)
-    - "renesas,cmt-48-gen2" for the second generation 48-bit CMT
+		This is a fallback for the above renesas,cmt-48-* entries.
+
+    - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT
+		(CMT[01])
+    - "renesas,cmt-48-r8a7790" for the r8a7790 48-bit CMT
+		(CMT[01])
+    - "renesas,cmt-48-r8a7791" for the r8a7791 48-bit CMT
+		(CMT[01])
+    - "renesas,cmt-48-gen2" for all second generation 48-bit CMT
 		(CMT[01] on r8a73a4, r8a7790 and r8a7791)
+		This is a fallback for the renesas,cmt-48-r8a73a4,
+		renesas,cmt-48-r8a7790 and renesas,cmt-48-r8a7791 entries.
 
   - reg: base address and length of the registers block for the timer module.
   - interrupts: interrupt-specifier for the timer, one per channel.
@@ -36,7 +68,7 @@ Example: R8A7790 (R-Car H2) CMT0 node
 	them channels 0 and 1 in the documentation.
 
 	cmt0: timer@ffca0000 {
-		compatible = "renesas,cmt-48-gen2";
+		compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
 		reg = <0 0xffca0000 0 0x1004>;
 		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 142 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Bindings/timer/renesas,mtu2.txt b/Bindings/timer/renesas,mtu2.txt
index 917453f826bc..ba0a34d97eb8 100644
--- a/Bindings/timer/renesas,mtu2.txt
+++ b/Bindings/timer/renesas,mtu2.txt
@@ -1,4 +1,4 @@
-* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2)
+* Renesas Multi-Function Timer Pulse Unit 2 (MTU2)
 
 The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
 clock inputs and programmable compare match.
@@ -8,7 +8,10 @@ are independent. The MTU2 hardware supports five channels indexed from 0 to 4.
 
 Required Properties:
 
-  - compatible: must contain "renesas,mtu2"
+  - compatible: must be one or more of the following:
+    - "renesas,mtu2-r7s72100" for the r7s72100 MTU2
+    - "renesas,mtu2" for any MTU2
+      This is a fallback for the above renesas,mtu2-* entries
 
   - reg: base address and length of the registers block for the timer module.
 
@@ -26,7 +29,7 @@ Required Properties:
 Example: R7S72100 (RZ/A1H) MTU2 node
 
 	mtu2: timer@fcff0000 {
-		compatible = "renesas,mtu2";
+		compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
 		reg = <0xfcff0000 0x400>;
 		interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 146 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Bindings/timer/renesas,tmu.txt b/Bindings/timer/renesas,tmu.txt
index 425d0c5f4aee..cd5f20bf2582 100644
--- a/Bindings/timer/renesas,tmu.txt
+++ b/Bindings/timer/renesas,tmu.txt
@@ -1,4 +1,4 @@
-* Renesas R-Car Timer Unit (TMU)
+* Renesas R-Mobile/R-Car Timer Unit (TMU)
 
 The TMU is a 32-bit timer/counter with configurable clock inputs and
 programmable compare match.
@@ -8,7 +8,12 @@ are independent. The TMU hardware supports up to three channels.
 
 Required Properties:
 
-  - compatible: must contain "renesas,tmu"
+  - compatible: must contain one or more of the following:
+    - "renesas,tmu-r8a7740" for the r8a7740 TMU
+    - "renesas,tmu-r8a7778" for the r8a7778 TMU
+    - "renesas,tmu-r8a7779" for the r8a7779 TMU
+    - "renesas,tmu" for any TMU.
+      This is a fallback for the above renesas,tmu-* entries
 
   - reg: base address and length of the registers block for the timer module.
 
@@ -27,7 +32,7 @@ Optional Properties:
 Example: R8A7779 (R-Car H1) TMU0 node
 
 	tmu0: timer@ffd80000 {
-		compatible = "renesas,tmu";
+		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
 		reg = <0xffd80000 0x30>;
 		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Bindings/timer/rockchip,rk3288-timer.txt b/Bindings/timer/rockchip,rk3288-timer.txt
new file mode 100644
index 000000000000..87f0b0042bae
--- /dev/null
+++ b/Bindings/timer/rockchip,rk3288-timer.txt
@@ -0,0 +1,18 @@
+Rockchip rk3288 timer
+
+Required properties:
+- compatible: shall be "rockchip,rk3288-timer"
+- reg: base address of the timer register starting with TIMERS CONTROL register
+- interrupts: should contain the interrupts for Timer0
+- clocks : must contain an entry for each entry in clock-names
+- clock-names : must include the following entries:
+  "timer", "pclk"
+
+Example:
+	timer: timer@ff810000 {
+		compatible = "rockchip,rk3288-timer";
+		reg = <0xff810000 0x20>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
diff --git a/Bindings/ufs/ufshcd-pltfrm.txt b/Bindings/ufs/ufshcd-pltfrm.txt
index 20468b2a7516..53579197eca2 100644
--- a/Bindings/ufs/ufshcd-pltfrm.txt
+++ b/Bindings/ufs/ufshcd-pltfrm.txt
@@ -8,9 +8,50 @@ Required properties:
 - interrupts        : <interrupt mapping for UFS host controller IRQ>
 - reg               : <registers mapping>
 
+Optional properties:
+- vdd-hba-supply        : phandle to UFS host controller supply regulator node
+- vcc-supply            : phandle to VCC supply regulator node
+- vccq-supply           : phandle to VCCQ supply regulator node
+- vccq2-supply          : phandle to VCCQ2 supply regulator node
+- vcc-supply-1p8        : For embedded UFS devices, valid VCC range is 1.7-1.95V
+                          or 2.7-3.6V. This boolean property when set, specifies
+			  to use low voltage range of 1.7-1.95V. Note for external
+			  UFS cards this property is invalid and valid VCC range is
+			  always 2.7-3.6V.
+- vcc-max-microamp      : specifies max. load that can be drawn from vcc supply
+- vccq-max-microamp     : specifies max. load that can be drawn from vccq supply
+- vccq2-max-microamp    : specifies max. load that can be drawn from vccq2 supply
+- <name>-fixed-regulator : boolean property specifying that <name>-supply is a fixed regulator
+
+- clocks                : List of phandle and clock specifier pairs
+- clock-names           : List of clock input name strings sorted in the same
+                          order as the clocks property.
+- freq-table-hz		: Array of <min max> operating frequencies stored in the same
+                          order as the clocks property. If this property is not
+			  defined or a value in the array is "0" then it is assumed
+			  that the frequency is set by the parent clock or a
+			  fixed rate clock source.
+
+Note: If above properties are not defined it can be assumed that the supply
+regulators or clocks are always on.
+
 Example:
 	ufshc@0xfc598000 {
 		compatible = "jedec,ufs-1.1";
 		reg = <0xfc598000 0x800>;
 		interrupts = <0 28 0>;
+
+		vdd-hba-supply = <&xxx_reg0>;
+		vdd-hba-fixed-regulator;
+		vcc-supply = <&xxx_reg1>;
+		vcc-supply-1p8;
+		vccq-supply = <&xxx_reg2>;
+		vccq2-supply = <&xxx_reg3>;
+		vcc-max-microamp = 500000;
+		vccq-max-microamp = 200000;
+		vccq2-max-microamp = 200000;
+
+		clocks = <&core 0>, <&ref 0>, <&iface 0>;
+		clock-names = "core_clk", "ref_clk", "iface_clk";
+		freq-table-hz = <100000000 200000000>, <0 0>, <0 0>;
 	};
diff --git a/Bindings/unittest.txt b/Bindings/unittest.txt
new file mode 100644
index 000000000000..8933211f32f9
--- /dev/null
+++ b/Bindings/unittest.txt
@@ -0,0 +1,71 @@
+1) OF selftest platform device
+
+** selftest
+
+Required properties:
+- compatible: must be "selftest"
+
+All other properties are optional.
+
+Example:
+	selftest {
+		compatible = "selftest";
+		status = "okay";
+	};
+
+2) OF selftest i2c adapter platform device
+
+** platform device unittest adapter
+
+Required properties:
+- compatible: must be selftest-i2c-bus
+
+Children nodes contain selftest i2c devices.
+
+Example:
+	selftest-i2c-bus {
+		compatible = "selftest-i2c-bus";
+		status = "okay";
+	};
+
+3) OF selftest i2c device
+
+** I2C selftest device
+
+Required properties:
+- compatible: must be selftest-i2c-dev
+
+All other properties are optional
+
+Example:
+	selftest-i2c-dev {
+		compatible = "selftest-i2c-dev";
+		status = "okay";
+	};
+
+4) OF selftest i2c mux device
+
+** I2C selftest mux
+
+Required properties:
+- compatible: must be selftest-i2c-mux
+
+Children nodes contain selftest i2c bus nodes per channel.
+
+Example:
+	selftest-i2c-mux {
+		compatible = "selftest-i2c-mux";
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel-0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-dev {
+				reg = <8>;
+				compatible = "selftest-i2c-dev";
+				status = "okay";
+			};
+		};
+	};
diff --git a/Bindings/usb/atmel-usb.txt b/Bindings/usb/atmel-usb.txt
index bc2222ca3f2a..e180d56c75db 100644
--- a/Bindings/usb/atmel-usb.txt
+++ b/Bindings/usb/atmel-usb.txt
@@ -33,9 +33,17 @@ usb1: ehci@00800000 {
 AT91 USB device controller
 
 Required properties:
- - compatible: Should be "atmel,at91rm9200-udc"
+ - compatible: Should be one of the following
+	       "atmel,at91rm9200-udc"
+	       "atmel,at91sam9260-udc"
+	       "atmel,at91sam9261-udc"
+	       "atmel,at91sam9263-udc"
  - reg: Address and length of the register set for the device
  - interrupts: Should contain macb interrupt
+ - clocks: Should reference the peripheral and the AHB clocks
+ - clock-names: Should contains two strings
+		"pclk" for the peripheral clock
+		"hclk" for the AHB clock
 
 Optional properties:
  - atmel,vbus-gpio: If present, specifies a gpio that needs to be
@@ -51,7 +59,10 @@ usb1: gadget@fffa4000 {
 Atmel High-Speed USB device controller
 
 Required properties:
- - compatible: Should be "atmel,at91sam9rl-udc"
+ - compatible: Should be one of the following
+	       "at91sam9rl-udc"
+	       "at91sam9g45-udc"
+	       "sama5d3-udc"
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - ep childnode: To specify the number of endpoints and their properties.
diff --git a/Bindings/usb/ci-hdrc-imx.txt b/Bindings/usb/ci-hdrc-imx.txt
index 1bae71e9ad47..38a548001e3a 100644
--- a/Bindings/usb/ci-hdrc-imx.txt
+++ b/Bindings/usb/ci-hdrc-imx.txt
@@ -19,6 +19,7 @@ Optional properties:
 - disable-over-current: disable over current detect
 - external-vbus-divider: enables off-chip resistor divider for Vbus
 - maximum-speed: limit the maximum connection speed to "full-speed".
+- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
 
 Examples:
 usb@02184000 { /* USB OTG */
@@ -30,4 +31,5 @@ usb@02184000 { /* USB OTG */
 	disable-over-current;
 	external-vbus-divider;
 	maximum-speed = "full-speed";
+	tpl-support;
 };
diff --git a/Bindings/usb/ci-hdrc-usb2.txt b/Bindings/usb/ci-hdrc-usb2.txt
new file mode 100644
index 000000000000..27f8b1e5ee46
--- /dev/null
+++ b/Bindings/usb/ci-hdrc-usb2.txt
@@ -0,0 +1,24 @@
+* USB2 ChipIdea USB controller for ci13xxx
+
+Required properties:
+- compatible: should be "chipidea,usb2"
+- reg: base address and length of the registers
+- interrupts: interrupt for the USB controller
+
+Optional properties:
+- clocks: reference to the USB clock
+- phys: reference to the USB PHY
+- phy-names: should be "usb-phy"
+- vbus-supply: reference to the VBUS regulator
+
+Example:
+
+	usb@f7ed0000 {
+		compatible = "chipidea,usb2";
+		reg = <0xf7ed0000 0x10000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&chip CLKID_USB0>;
+		phys = <&usb_phy0>;
+		phy-names = "usb-phy";
+		vbus-supply = <&reg_usb0_vbus>;
+	};
diff --git a/Bindings/usb/dwc2.txt b/Bindings/usb/dwc2.txt
index 467ddd15d40c..fd132cbee70e 100644
--- a/Bindings/usb/dwc2.txt
+++ b/Bindings/usb/dwc2.txt
@@ -4,6 +4,9 @@ Platform DesignWare HS OTG USB 2.0 controller
 Required properties:
 - compatible : One of:
   - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
+  - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
+  - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
+  - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
   - snps,dwc2: A generic DWC2 USB controller with default parameters.
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
@@ -15,6 +18,12 @@ Optional properties:
 - phys: phy provider specifier
 - phy-names: shall be "usb2-phy"
 Refer to phy/phy-bindings.txt for generic phy consumer properties
+- dr_mode: shall be one of "host", "peripheral" and "otg"
+  Refer to usb/generic.txt
+- g-use-dma: enable dma usage in gadget driver.
+- g-rx-fifo-size: size of rx fifo size in gadget mode.
+- g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
 
 Example:
 
diff --git a/Bindings/usb/dwc3-st.txt b/Bindings/usb/dwc3-st.txt
new file mode 100644
index 000000000000..f9d70252bbb2
--- /dev/null
+++ b/Bindings/usb/dwc3-st.txt
@@ -0,0 +1,68 @@
+ST DWC3 glue logic
+
+This file documents the parameters for the dwc3-st driver.
+This driver controls the glue logic used to configure the dwc3 core on
+STiH407 based platforms.
+
+Required properties:
+ - compatible	: must be "st,stih407-dwc3"
+ - reg		: glue logic base address and USB syscfg ctrl register offset
+ - reg-names	: should be "reg-glue" and "syscfg-reg"
+ - st,syscon	: should be phandle to system configuration node which
+		  encompasses the glue registers
+ - resets	: list of phandle and reset specifier pairs. There should be two entries, one
+		  for the powerdown and softreset lines of the usb3 IP
+ - reset-names	: list of reset signal names. Names should be "powerdown" and "softreset"
+See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+   with 'reg' property
+
+ - pinctl-names	: A pinctrl state named "default" must be defined
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+ - pinctrl-0	: Pin control group
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+ - ranges	: allows valid 1:1 translation between child's address space and
+		  parent's address space
+
+Sub-nodes:
+The dwc3 core should be added as subnode to ST DWC3 glue as shown in the
+example below. The DT binding details of dwc3 can be found in:
+Documentation/devicetree/bindings/usb/dwc3.txt
+
+NB: The dr_mode property described in [1] is NOT optional for this driver, as the default value
+is "otg", which isn't supported by this SoC. Valid dr_mode values for dwc3-st are either "host"
+or "device".
+
+[1] Documentation/devicetree/bindings/usb/generic.txt
+
+Example:
+
+st_dwc3: dwc3@8f94000 {
+	status		= "disabled";
+	compatible	= "st,stih407-dwc3";
+	reg		= <0x08f94000 0x1000>, <0x110 0x4>;
+	reg-names	= "reg-glue", "syscfg-reg";
+	st,syscfg	= <&syscfg_core>;
+	resets		= <&powerdown STIH407_USB3_POWERDOWN>,
+			  <&softreset STIH407_MIPHY2_SOFTRESET>;
+	reset-names	= "powerdown",
+			  "softreset";
+	#address-cells	= <1>;
+	#size-cells	= <1>;
+	pinctrl-names	= "default";
+	pinctrl-0	= <&pinctrl_usb3>;
+	ranges;
+
+	dwc3: dwc3@9900000 {
+		compatible	= "snps,dwc3";
+		reg		= <0x09900000 0x100000>;
+		interrupts	= <GIC_SPI 155 IRQ_TYPE_NONE>;
+		dr_mode		= "host";
+		phys-names      = "usb2-phy", "usb3-phy";
+		phys            = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>;
+	};
+};
diff --git a/Bindings/usb/dwc3.txt b/Bindings/usb/dwc3.txt
index 471366d6a129..cd7f0454e13a 100644
--- a/Bindings/usb/dwc3.txt
+++ b/Bindings/usb/dwc3.txt
@@ -14,6 +14,29 @@ Optional properties:
  - phys: from the *Generic PHY* bindings
  - phy-names: from the *Generic PHY* bindings
  - tx-fifo-resize: determines if the FIFO *has* to be reallocated.
+ - snps,disable_scramble_quirk: true when SW should disable data scrambling.
+	Only really useful for FPGA builds.
+ - snps,has-lpm-erratum: true when DWC3 was configured with LPM Erratum enabled
+ - snps,lpm-nyet-threshold: LPM NYET threshold
+ - snps,u2exit_lfps_quirk: set if we want to enable u2exit lfps quirk
+ - snps,u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
+ - snps,req_p1p2p3_quirk: when set, the core will always request for
+			P1/P2/P3 transition sequence.
+ - snps,del_p1p2p3_quirk: when set core will delay P1/P2/P3 until a certain
+			amount of 8B10B errors occur.
+ - snps,del_phy_power_chg_quirk: when set core will delay PHY power change
+			from P0 to P1/P2/P3.
+ - snps,lfps_filter_quirk: when set core will filter LFPS reception.
+ - snps,rx_detect_poll_quirk: when set core will disable a 400us delay to start
+			Polling LFPS after RX.Detect.
+ - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value.
+ - snps,tx_de_emphasis: the value driven to the PHY is controlled by the
+			LTSSM during USB3 Compliance mode.
+ - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy.
+ - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy.
+ - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
+			utmi_l1_suspend_n, false when asserts utmi_sleep_n
+ - snps,hird-threshold: HIRD threshold
 
 This is usually a subnode to DWC3 glue to which it is connected.
 
diff --git a/Bindings/usb/ehci-st.txt b/Bindings/usb/ehci-st.txt
new file mode 100644
index 000000000000..fb45fa5770bb
--- /dev/null
+++ b/Bindings/usb/ehci-st.txt
@@ -0,0 +1,39 @@
+ST USB EHCI controller
+
+Required properties:
+ - compatible		: must be "st,st-ehci-300x"
+ - reg			: physical base addresses of the controller and length of memory mapped
+			  region
+ - interrupts		: one EHCI interrupt should be described here
+ - pinctrl-names	: a pinctrl state named "default" must be defined
+ - pinctrl-0		: phandle referencing pin configuration of the USB controller
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+ - clocks		: phandle list of usb clocks
+ - clock-names		: should be "ic" for interconnect clock and "clk48"
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+ - phys			: phandle for the PHY device
+ - phy-names		: should be "usb"
+ - resets		: phandle + reset specifier pairs to the powerdown and softreset lines
+			  of the USB IP
+ - reset-names		: should be "power" and "softreset"
+See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+Example:
+
+	ehci1: usb@0xfe203e00 {
+		compatible = "st,st-ehci-300x";
+		reg = <0xfe203e00 0x100>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1>;
+		clocks = <&clk_s_a1_ls 0>;
+		phys = <&usb2_phy>;
+		phy-names = "usb";
+		status = "okay";
+
+		resets = <&powerdown STIH416_USB1_POWERDOWN>,
+			 <&softreset STIH416_USB1_SOFTRESET>;
+		reset-names = "power", "softreset";
+	};
diff --git a/Bindings/usb/exynos-usb.txt b/Bindings/usb/exynos-usb.txt
index a3b5990d0f2c..9b4dbe3b2acc 100644
--- a/Bindings/usb/exynos-usb.txt
+++ b/Bindings/usb/exynos-usb.txt
@@ -82,8 +82,10 @@ Example:
 
 DWC3
 Required properties:
- - compatible: should be "samsung,exynos5250-dwusb3" for USB 3.0 DWC3
-	       controller.
+ - compatible: should be one of the following -
+	       "samsung,exynos5250-dwusb3": for USB 3.0 DWC3 controller on
+					    Exynos5250/5420.
+	       "samsung,exynos7-dwusb3": for USB 3.0 DWC3 controller on Exynos7.
  - #address-cells, #size-cells : should be '1' if the device has sub-nodes
 				 with 'reg' property.
  - ranges: allows valid 1:1 translation between child's address space and
diff --git a/Bindings/usb/mxs-phy.txt b/Bindings/usb/mxs-phy.txt
index cef181a9d8bd..379b84a567cc 100644
--- a/Bindings/usb/mxs-phy.txt
+++ b/Bindings/usb/mxs-phy.txt
@@ -5,6 +5,8 @@ Required properties:
 	* "fsl,imx23-usbphy" for imx23 and imx28
 	* "fsl,imx6q-usbphy" for imx6dq and imx6dl
 	* "fsl,imx6sl-usbphy" for imx6sl
+	* "fsl,vf610-usbphy" for Vybrid vf610
+	* "fsl,imx6sx-usbphy" for imx6sx
   "fsl,imx23-usbphy" is still a fallback for other strings
 - reg: Should contain registers location and length
 - interrupts: Should contain phy interrupt
diff --git a/Bindings/usb/nvidia,tegra20-ehci.txt b/Bindings/usb/nvidia,tegra20-ehci.txt
index 3dc9140e3dfb..f60785f73d3d 100644
--- a/Bindings/usb/nvidia,tegra20-ehci.txt
+++ b/Bindings/usb/nvidia,tegra20-ehci.txt
@@ -6,7 +6,10 @@ Practice : Universal Serial Bus" with the following modifications
 and additions :
 
 Required properties :
- - compatible : Should be "nvidia,tegra20-ehci".
+ - compatible : For Tegra20, must contain "nvidia,tegra20-ehci".
+   For Tegra30, must contain "nvidia,tegra30-ehci".  Otherwise, must contain
+   "nvidia,<chip>-ehci" plus at least one of the above, where <chip> is
+   tegra114, tegra124, tegra132, or tegra210.
  - nvidia,phy : phandle of the PHY that the controller is connected to.
  - clocks : Must contain one entry, for the module clock.
    See ../clocks/clock-bindings.txt for details.
diff --git a/Bindings/usb/nvidia,tegra20-usb-phy.txt b/Bindings/usb/nvidia,tegra20-usb-phy.txt
index c9205fbf26e2..a9aa79fb90ed 100644
--- a/Bindings/usb/nvidia,tegra20-usb-phy.txt
+++ b/Bindings/usb/nvidia,tegra20-usb-phy.txt
@@ -3,7 +3,10 @@ Tegra SOC USB PHY
 The device node for Tegra SOC USB PHY:
 
 Required properties :
- - compatible : Should be "nvidia,tegra<chip>-usb-phy".
+ - compatible : For Tegra20, must contain "nvidia,tegra20-usb-phy".
+   For Tegra30, must contain "nvidia,tegra30-usb-phy".  Otherwise, must contain
+   "nvidia,<chip>-usb-phy" plus at least one of the above, where <chip> is
+   tegra114, tegra124, tegra132, or tegra210.
  - reg : Defines the following set of registers, in the order listed:
    - The PHY's own register set.
      Always present.
diff --git a/Bindings/usb/ohci-st.txt b/Bindings/usb/ohci-st.txt
new file mode 100644
index 000000000000..6d8393748da2
--- /dev/null
+++ b/Bindings/usb/ohci-st.txt
@@ -0,0 +1,37 @@
+ST USB OHCI controller
+
+Required properties:
+
+ - compatible		: must be "st,st-ohci-300x"
+ - reg			: physical base addresses of the controller and length of memory mapped
+			  region
+ - interrupts		: one OHCI controller interrupt should be described here
+ - clocks		: phandle list of usb clocks
+ - clock-names		: should be "ic" for interconnect clock and "clk48"
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+ - phys			: phandle for the PHY device
+ - phy-names		: should be "usb"
+
+ - resets		: phandle to the powerdown and reset controller for the USB IP
+ - reset-names		: should be "power" and "softreset".
+See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+Example:
+
+	ohci0: usb@0xfe1ffc00 {
+		compatible = "st,st-ohci-300x";
+		reg = <0xfe1ffc00 0x100>;
+		interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
+		clocks = <&clk_s_a1_ls 0>,
+			 <&clockgen_b0 0>;
+		clock-names = "ic", "clk48";
+		phys = <&usb2_phy>;
+		phy-names = "usb";
+		status = "okay";
+
+		resets = <&powerdown STIH416_USB0_POWERDOWN>,
+			 <&softreset STIH416_USB0_SOFTRESET>;
+		reset-names = "power", "softreset";
+	};
diff --git a/Bindings/usb/pxa-usb.txt b/Bindings/usb/pxa-usb.txt
index 79729a948d5a..9c331799b87c 100644
--- a/Bindings/usb/pxa-usb.txt
+++ b/Bindings/usb/pxa-usb.txt
@@ -29,3 +29,25 @@ Example:
 		marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
 	};
 
+UDC
+
+Required properties:
+ - compatible: Should be "marvell,pxa270-udc" for USB controllers
+   used in device mode.
+ - reg: usb device MMIO address space
+ - interrupts: single interrupt generated by the UDC IP
+ - clocks: input clock of the UDC IP (see clock-bindings.txt)
+
+Optional properties:
+ - gpios:
+   - gpio activated to control the USB D+ pullup (see gpio.txt)
+
+Example:
+
+		pxa27x_udc: udc@40600000 {
+			compatible = "marvell,pxa270-udc";
+			reg = <0x40600000 0x10000>;
+			interrupts = <11>;
+			clocks = <&pxa2xx_clks 11>;
+			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+		};
diff --git a/Bindings/usb/qcom,dwc3.txt b/Bindings/usb/qcom,dwc3.txt
new file mode 100644
index 000000000000..ca164e71dd50
--- /dev/null
+++ b/Bindings/usb/qcom,dwc3.txt
@@ -0,0 +1,66 @@
+Qualcomm SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible:	should contain "qcom,dwc3"
+- clocks:		A list of phandle + clock-specifier pairs for the
+				clocks listed in clock-names
+- clock-names:	Should contain the following:
+  "core"		Master/Core clock, have to be >= 125 MHz for SS
+				operation and >= 60MHz for HS operation
+
+Optional clocks:
+  "iface"		System bus AXI clock.  Not present on all platforms
+  "sleep"		Sleep clock, used when USB3 core goes into low
+				power mode (U3).
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Phy documentation is provided in the following places:
+Documentation/devicetree/bindings/phy/qcom,dwc3-usb-phy.txt
+
+Example device nodes:
+
+		hs_phy: phy@100f8800 {
+			compatible = "qcom,dwc3-hs-usb-phy";
+			reg = <0x100f8800 0x30>;
+			clocks = <&gcc USB30_0_UTMI_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "ok";
+		};
+
+		ss_phy: phy@100f8830 {
+			compatible = "qcom,dwc3-ss-usb-phy";
+			reg = <0x100f8830 0x30>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "ref";
+			#phy-cells = <0>;
+
+			status = "ok";
+		};
+
+		usb3_0: usb30@0 {
+			compatible = "qcom,dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gcc USB30_0_MASTER_CLK>;
+			clock-names = "core";
+
+			ranges;
+
+			status = "ok";
+
+			dwc3@10000000 {
+				compatible = "snps,dwc3";
+				reg = <0x10000000 0xcd00>;
+				interrupts = <0 205 0x4>;
+				phys = <&hs_phy>, <&ss_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				dr_mode = "host";
+			};
+		};
+
diff --git a/Bindings/usb/renesas_usbhs.txt b/Bindings/usb/renesas_usbhs.txt
new file mode 100644
index 000000000000..61b045b6d50e
--- /dev/null
+++ b/Bindings/usb/renesas_usbhs.txt
@@ -0,0 +1,26 @@
+Renesas Electronics USBHS driver
+
+Required properties:
+  - compatible: Must contain one of the following:
+	- "renesas,usbhs-r8a7790"
+	- "renesas,usbhs-r8a7791"
+  - reg: Base address and length of the register for the USBHS
+  - interrupts: Interrupt specifier for the USBHS
+  - clocks: A list of phandle + clock specifier pairs
+
+Optional properties:
+  - renesas,buswait: Integer to use BUSWAIT register
+  - renesas,enable-gpio: A gpio specifier to check GPIO determining if USB
+			 function should be enabled
+  - phys: phandle + phy specifier pair
+  - phy-names: must be "usb"
+  - dmas: Must contain a list of references to DMA specifiers.
+  - dma-names : Must contain a list of DMA names, "tx" or "rx".
+
+Example:
+	usbhs: usb@e6590000 {
+		compatible = "renesas,usbhs-r8a7790";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+	};
diff --git a/Bindings/usb/udc-xilinx.txt b/Bindings/usb/udc-xilinx.txt
new file mode 100644
index 000000000000..47b4e397a08d
--- /dev/null
+++ b/Bindings/usb/udc-xilinx.txt
@@ -0,0 +1,18 @@
+Xilinx USB2 device controller
+
+Required properties:
+- compatible		: Should be "xlnx,usb2-device-4.00.a"
+- reg			: Physical base address and size of the USB2
+			  device registers map.
+- interrupts		: Should contain single irq line of USB2 device
+			  controller
+- xlnx,has-builtin-dma	: if DMA is included
+
+Example:
+ 		axi-usb2-device@42e00000 {
+                        compatible = "xlnx,usb2-device-4.00.a";
+                        interrupts = <0x0 0x39 0x1>;
+                        reg = <0x42e00000 0x10000>;
+                        xlnx,has-builtin-dma;
+                };
+
diff --git a/Bindings/usb/usb-ehci.txt b/Bindings/usb/usb-ehci.txt
index 43c1a4e06767..0b04fdff9d5a 100644
--- a/Bindings/usb/usb-ehci.txt
+++ b/Bindings/usb/usb-ehci.txt
@@ -12,6 +12,7 @@ Optional properties:
  - big-endian-regs : boolean, set this for hcds with big-endian registers
  - big-endian-desc : boolean, set this for hcds with big-endian descriptors
  - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+ - needs-reset-on-resume : boolean, set this to force EHCI reset after resume
  - clocks : a list of phandle + clock specifier pairs
  - phys : phandle + phy specifier pair
  - phy-names : "usb"
diff --git a/Bindings/usb/usb-nop-xceiv.txt b/Bindings/usb/usb-nop-xceiv.txt
index 1bd37faba05b..5be01c859b7a 100644
--- a/Bindings/usb/usb-nop-xceiv.txt
+++ b/Bindings/usb/usb-nop-xceiv.txt
@@ -13,10 +13,15 @@ Optional properties:
 - clock-frequency: the clock frequency (in Hz) that the PHY clock must
   be configured to.
 
-- vcc-supply: phandle to the regulator that provides RESET to the PHY.
+- vcc-supply: phandle to the regulator that provides power to the PHY.
 
 - reset-gpios: Should specify the GPIO for reset.
 
+- vbus-detect-gpio: should specify the GPIO detecting a VBus insertion
+                    (see Documentation/devicetree/bindings/gpio/gpio.txt)
+- vbus-regulator : should specifiy the regulator supplying current drawn from
+  the VBus line (see Documentation/devicetree/bindings/regulator/regulator.txt).
+
 Example:
 
 	hsusb1_phy {
@@ -26,8 +31,11 @@ Example:
 		clock-names = "main_clk";
 		vcc-supply = <&hsusb1_vcc_regulator>;
 		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		vbus-regulator = <&vbus_regulator>;
 	};
 
 hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator
 and expects that clock to be configured to 19.2MHz by the NOP PHY driver.
 hsusb1_vcc_regulator provides power to the PHY and GPIO 7 controls RESET.
+GPIO 13 detects VBus insertion, and accordingly notifies the vbus-regulator.
diff --git a/Bindings/usb/usb-ohci.txt b/Bindings/usb/usb-ohci.txt
index b968a1aea995..19233b7365e1 100644
--- a/Bindings/usb/usb-ohci.txt
+++ b/Bindings/usb/usb-ohci.txt
@@ -9,6 +9,8 @@ Optional properties:
 - big-endian-regs : boolean, set this for hcds with big-endian registers
 - big-endian-desc : boolean, set this for hcds with big-endian descriptors
 - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
+- num-ports : u32, to override the detected port count
 - clocks : a list of phandle + clock specifier pairs
 - phys : phandle + phy specifier pair
 - phy-names : "usb"
diff --git a/Bindings/usb/usb3503.txt b/Bindings/usb/usb3503.txt
index 221ac0dbc678..52493b1480e2 100644
--- a/Bindings/usb/usb3503.txt
+++ b/Bindings/usb/usb3503.txt
@@ -8,8 +8,8 @@ Optional properties:
        if I2C is used.
 - connect-gpios: Should specify GPIO for connect.
 - disabled-ports: Should specify the ports unused.
-	'1' or '2' or '3' are availe for this property to describe the port
-	number. 1~3 property values are possible to be desribed.
+	'1' or '2' or '3' are available for this property to describe the port
+	number. 1~3 property values are possible to be described.
 	Do not describe this property if all ports have to be enabled.
 - intn-gpios: Should specify GPIO for interrupt.
 - reset-gpios: Should specify GPIO for reset.
diff --git a/Bindings/usb/usbmisc-imx.txt b/Bindings/usb/usbmisc-imx.txt
index 97ce94e1a6cc..c101a4b17131 100644
--- a/Bindings/usb/usbmisc-imx.txt
+++ b/Bindings/usb/usbmisc-imx.txt
@@ -4,6 +4,7 @@ Required properties:
 - #index-cells: Cells used to descibe usb controller index. Should be <1>
 - compatible: Should be one of below:
 	"fsl,imx6q-usbmisc" for imx6q
+	"fsl,vf610-usbmisc" for Vybrid vf610
 - reg: Should contain registers location and length
 
 Examples:
diff --git a/Bindings/vendor-prefixes.txt b/Bindings/vendor-prefixes.txt
index ac7269f90764..389ca1347a77 100644
--- a/Bindings/vendor-prefixes.txt
+++ b/Bindings/vendor-prefixes.txt
@@ -4,24 +4,29 @@ This isn't an exhaustive list, but you should add new prefixes to it before
 using them to avoid name-space collisions.
 
 abilis	Abilis Systems
+abcn	Abracon Corporation
 active-semi	Active-Semi International Inc
 ad	Avionic Design GmbH
 adapteva	Adapteva, Inc.
+adh	AD Holdings Plc.
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
-ak	Asahi Kasei Corp.
 allwinner	Allwinner Technology Co., Ltd.
+alphascale	AlphaScale Integrated Circuits Systems, Inc.
 altr	Altera Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 amd	Advanced Micro Devices (AMD), Inc.
+amlogic	Amlogic, Inc.
 ams	AMS AG
 amstaos	AMS-Taos Inc.
 apm	Applied Micro Circuits Corporation (APM)
 arm	ARM Ltd.
 armadeus	ARMadeus Systems SARL
+asahi-kasei	Asahi Kasei Corp.
 atmel	Atmel Corporation
 auo	AU Optronics Corporation
 avago	Avago Technologies
+avic	Shanghai AVIC Optoelectronics Co., Ltd.
 bosch	Bosch Sensortec GmbH
 brcm	Broadcom Corporation
 buffalo	Buffalo, Inc.
@@ -29,35 +34,56 @@ calxeda	Calxeda
 capella	Capella Microsystems, Inc
 cavium	Cavium, Inc.
 cdns	Cadence Design Systems Inc.
+chipidea	Chipidea, Inc
+chipspark	ChipSPARK
 chrp	Common Hardware Reference Platform
 chunghwa	Chunghwa Picture Tubes Ltd.
 cirrus	Cirrus Logic, Inc.
+cloudengines	Cloud Engines, Inc.
+cnm	Chips&Media, Inc.
+cnxt	Conexant Systems, Inc.
 cortina	Cortina Systems, Inc.
+cosmic	Cosmic Circuits
 crystalfontz	Crystalfontz America, Inc.
 dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
 davicom	DAVICOM Semiconductor, Inc.
 denx	Denx Software Engineering
 digi	Digi International Inc.
+digilent	Diglent, Inc.
+dlg	Dialog Semiconductor
 dlink	D-Link Corporation
 dmo	Data Modul AG
 ebv	EBV Elektronik
 edt	Emerging Display Technologies
+elan	Elan Microelectronic Corp.
 emmicro	EM Microelectronic
+energymicro	Silicon Laboratories (formerly Energy Micro AS)
 epcos	EPCOS AG
 epfl	Ecole Polytechnique Fédérale de Lausanne
 epson	Seiko Epson Corp.
 est	ESTeem Wireless Modems
+ettus	NI Ettus Research
 eukrea  Eukréa Electromatique
+everest	Everest Semiconductor Co. Ltd.
+everspin	Everspin Technologies, Inc.
 excito	Excito
+fcs	Fairchild Semiconductor
+firefly	Firefly
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+geniatech	Geniatech, Inc.
+giantplus	Giantplus Technology Co., Ltd.
 globalscale	Globalscale Technologies, Inc.
 gmt	Global Mixed-mode Technology, Inc.
 google	Google, Inc.
 gumstix	Gumstix, Inc.
+gw	Gateworks Corporation
+hannstar	HannStar Display Corporation
 haoyu	Haoyu Microelectronic Co. Ltd.
+himax	Himax Technologies, Inc.
 hisilicon	Hisilicon Limited.
+hit	Hitachi Ltd.
 honeywell	Honeywell
 hp	Hewlett Packard
 i2se	I2SE GmbH
@@ -65,10 +91,11 @@ ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
 iom	Iomega Corporation
 img	Imagination Technologies Ltd.
+innolux	Innolux Corporation
 intel	Intel Corporation
 intercontrol	Inter Control Group
 isee	ISEE 2007 S.L.
-isl	Intersil
+isil	Intersil
 karo	Ka-Ro electronics GmbH
 keymile	Keymile GmbH
 lacie	LaCie
@@ -81,11 +108,15 @@ lltc	Linear Technology Corporation
 marvell	Marvell Technology Group Ltd.
 maxim	Maxim Integrated Products
 mediatek	MediaTek Inc.
+merrii	Merrii Technology Co., Ltd.
 micrel	Micrel Inc.
 microchip	Microchip Technology Inc.
+micron	Micron Technology Inc.
+mitsubishi	Mitsubishi Electric Corporation
 mosaixtech	Mosaix Technologies, Inc.
 moxa	Moxa
 mpl	MPL AG
+mti	Imagination Technologies Ltd. (formerly MIPS Technologies Inc.)
 mundoreader	Mundo Reader S.L.
 murata	Murata Manufacturing Co., Ltd.
 mxicy	Macronix International Co., Ltd.
@@ -99,7 +130,10 @@ nvidia	NVIDIA
 nxp	NXP Semiconductors
 onnn	ON Semiconductor Corp.
 opencores	OpenCores.org
+ovti	OmniVision Technologies
 panasonic	Panasonic Corporation
+parade	Parade Technologies Inc.
+pericom	Pericom Technology Inc.
 phytec	PHYTEC Messtechnik GmbH
 picochip	Picochip Ltd
 plathome	Plat'Home Co., Ltd.
@@ -107,6 +141,7 @@ pixcir  PIXCIR MICROELECTRONICS Co., Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
 qcom	Qualcomm Technologies, Inc
+qemu	QEMU, a generic and open source machine emulator and virtualizer
 qnap	QNAP Systems, Inc.
 radxa	Radxa
 raidsonic	RaidSonic Technology GmbH
@@ -117,36 +152,48 @@ renesas	Renesas Electronics Corporation
 ricoh	Ricoh Co. Ltd.
 rockchip	Fuzhou Rockchip Electronics Co., Ltd
 samsung	Samsung Semiconductor
+sandisk	Sandisk Corporation
 sbs	Smart Battery System
 schindler	Schindler
 seagate	Seagate Technology PLC
+semtech	Semtech Corporation
 sil	Silicon Image
 silabs	Silicon Laboratories
+siliconmitus	Silicon Mitus, Inc.
 simtek
 sii	Seiko Instruments, Inc.
+silergy	Silergy Corp.
 sirf	SiRF Technology, Inc.
+sitronix	Sitronix Technology Corporation
 smsc	Standard Microsystems Corporation
-snps 	Synopsys, Inc.
+snps	Synopsys, Inc.
 solidrun	SolidRun
+sony	Sony Corporation
 spansion	Spansion Inc.
+sprd	Spreadtrum Communications Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
 synology	Synology, Inc.
+tbs	TBS Technologies
+thine	THine Electronics, Inc.
 ti	Texas Instruments
 tlm	Trusted Logic Mobility
 toradex	Toradex AG
 toshiba	Toshiba Corporation
 toumaz	Toumaz
-usi	Universal Scientifc Industrial Co., Ltd.
+truly	Truly Semiconductors Limited
+usi	Universal Scientific Industrial Co., Ltd.
 v3	V3 Semiconductor
 variscite	Variscite Ltd.
 via	VIA Technologies, Inc.
+virtio	Virtual I/O Device Specification, developed by the OASIS consortium
 voipac	Voipac Technologies s.r.o.
 winbond Winbond Electronics corp.
 wlf	Wolfson Microelectronics
 wm	Wondermedia Technologies, Inc.
 xes	Extreme Engineering Solutions (X-ES)
+xillybus	Xillybus Ltd.
 xlnx	Xilinx
 zyxel	ZyXEL Communications Corp.
 zarlink	Zarlink Semiconductor
diff --git a/Bindings/video/adi,adv7123.txt b/Bindings/video/adi,adv7123.txt
new file mode 100644
index 000000000000..a6b2b2b8f3d9
--- /dev/null
+++ b/Bindings/video/adi,adv7123.txt
@@ -0,0 +1,50 @@
+Analog Device ADV7123 Video DAC
+-------------------------------
+
+The ADV7123 is a digital-to-analog converter that outputs VGA signals from a
+parallel video input.
+
+Required properties:
+
+- compatible: Should be "adi,adv7123"
+
+Optional properties:
+
+- psave-gpios: Power save control GPIO
+
+Required nodes:
+
+The ADV7123 has two video ports. Their connections are modeled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for DPI input
+- Video port 1 for VGA output
+
+
+Example
+-------
+
+	adv7123: encoder@0 {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7123_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7123_out: endpoint@0 {
+					remote-endpoint = <&vga_connector_in>;
+				};
+			};
+		};
+	};
diff --git a/Bindings/video/adi,adv7511.txt b/Bindings/video/adi,adv7511.txt
new file mode 100644
index 000000000000..96c25ee01501
--- /dev/null
+++ b/Bindings/video/adi,adv7511.txt
@@ -0,0 +1,88 @@
+Analog Device ADV7511(W)/13 HDMI Encoders
+-----------------------------------------
+
+The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters
+compatible with HDMI 1.4 and DVI 1.0. They support color space conversion,
+S/PDIF, CEC and HDCP.
+
+Required properties:
+
+- compatible: Should be one of "adi,adv7511", "adi,adv7511w" or "adi,adv7513"
+- reg: I2C slave address
+
+The ADV7511 supports a large number of input data formats that differ by their
+color depth, color format, clock mode, bit justification and random
+arrangement of components on the data bus. The combination of the following
+properties describe the input and map directly to the video input tables of the
+ADV7511 datasheet that document all the supported combinations.
+
+- adi,input-depth: Number of bits per color component at the input (8, 10 or
+  12).
+- adi,input-colorspace: The input color space, one of "rgb", "yuv422" or
+  "yuv444".
+- adi,input-clock: The input clock type, one of "1x" (one clock cycle per
+  pixel), "2x" (two clock cycles per pixel), "ddr" (one clock cycle per pixel,
+  data driven on both edges).
+
+The following input format properties are required except in "rgb 1x" and
+"yuv444 1x" modes, in which case they must not be specified.
+
+- adi,input-style: The input components arrangement variant (1, 2 or 3), as
+  listed in the input format tables in the datasheet.
+- adi,input-justification: The input bit justification ("left", "evenly",
+  "right").
+
+Optional properties:
+
+- interrupts: Specifier for the ADV7511 interrupt
+- pd-gpios: Specifier for the GPIO connected to the power down signal
+
+- adi,clock-delay: Video data clock delay relative to the pixel clock, in ps
+  (-1200 ps .. 1600 ps). Defaults to no delay.
+- adi,embedded-sync: The input uses synchronization signals embedded in the
+  data stream (similar to BT.656). Defaults to separate H/V synchronization
+  signals.
+
+Required nodes:
+
+The ADV7511 has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for the RGB or YUV input
+- Video port 1 for the HDMI output
+
+
+Example
+-------
+
+	adv7511w: hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511w_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
diff --git a/Bindings/video/analog-tv-connector.txt b/Bindings/video/analog-tv-connector.txt
index 0218fcdc1299..0c0970c210ab 100644
--- a/Bindings/video/analog-tv-connector.txt
+++ b/Bindings/video/analog-tv-connector.txt
@@ -2,7 +2,7 @@ Analog TV Connector
 ===================
 
 Required properties:
-- compatible: "composite-connector" or "svideo-connector"
+- compatible: "composite-video-connector" or "svideo-connector"
 
 Optional properties:
 - label: a symbolic name for the connector
@@ -14,7 +14,7 @@ Example
 -------
 
 tv: connector {
-	compatible = "composite-connector";
+	compatible = "composite-video-connector";
 	label = "tv";
 
 	port {
diff --git a/Bindings/video/atmel,lcdc.txt b/Bindings/video/atmel,lcdc.txt
index b75af94a5e52..f059dd0b3d28 100644
--- a/Bindings/video/atmel,lcdc.txt
+++ b/Bindings/video/atmel,lcdc.txt
@@ -20,6 +20,9 @@ Required nodes:
 - default-mode: a videomode within the display with timing parameters
 	as specified below.
 
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+
 Example:
 
 	fb0: fb@0x00500000 {
@@ -39,8 +42,8 @@ Atmel LCDC Display
 -----------------------------------------------------
 Required properties (as per of_videomode_helper):
 
- - atmel,dmacon: dma controler configuration
- - atmel,lcdcon2: lcd controler configuration
+ - atmel,dmacon: dma controller configuration
+ - atmel,lcdcon2: lcd controller configuration
  - atmel,guard-time: lcd guard time (Delay in frame periods)
  - bits-per-pixel: lcd panel bit-depth.
 
diff --git a/Bindings/video/backlight/lp855x.txt b/Bindings/video/backlight/lp855x.txt
index 96e83a56048e..0a3ecbc3a1b9 100644
--- a/Bindings/video/backlight/lp855x.txt
+++ b/Bindings/video/backlight/lp855x.txt
@@ -12,6 +12,7 @@ Optional properties:
   - pwm-period: PWM period value. Set only PWM input mode used (u32)
   - rom-addr: Register address of ROM area to be updated (u8)
   - rom-val: Register value to be updated (u8)
+  - power-supply: Regulator which controls the 3V rail
 
 Example:
 
@@ -56,6 +57,7 @@ Example:
 	backlight@2c {
 		compatible = "ti,lp8557";
 		reg = <0x2c>;
+		power-supply = <&backlight_vdd>;
 
 		dev-ctrl = /bits/ 8 <0x41>;
 		init-brt = /bits/ 8 <0x0a>;
diff --git a/Bindings/video/bridge/ps8622.txt b/Bindings/video/bridge/ps8622.txt
new file mode 100644
index 000000000000..c989c3807f2b
--- /dev/null
+++ b/Bindings/video/bridge/ps8622.txt
@@ -0,0 +1,31 @@
+ps8622-bridge bindings
+
+Required properties:
+	- compatible: "parade,ps8622" or "parade,ps8625"
+	- reg: first i2c address of the bridge
+	- sleep-gpios: OF device-tree gpio specification for PD_ pin.
+	- reset-gpios: OF device-tree gpio specification for RST_ pin.
+
+Optional properties:
+	- lane-count: number of DP lanes to use
+	- use-external-pwm: backlight will be controlled by an external PWM
+	- video interfaces: Device node can contain video interface port
+			    nodes for panel according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+	lvds-bridge@48 {
+		compatible = "parade,ps8622";
+		reg = <0x48>;
+		sleep-gpios = <&gpc3 6 1 0 0>;
+		reset-gpios = <&gpc3 1 1 0 0>;
+		lane-count = <1>;
+		ports {
+			port@0 {
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
diff --git a/Bindings/video/bridge/ptn3460.txt b/Bindings/video/bridge/ptn3460.txt
new file mode 100644
index 000000000000..361971ba104d
--- /dev/null
+++ b/Bindings/video/bridge/ptn3460.txt
@@ -0,0 +1,39 @@
+ptn3460 bridge bindings
+
+Required properties:
+	- compatible: "nxp,ptn3460"
+	- reg: i2c address of the bridge
+	- powerdown-gpio: OF device-tree gpio specification  for PD_N pin.
+	- reset-gpio: OF device-tree gpio specification for RST_N pin.
+	- edid-emulation: The EDID emulation entry to use
+		+-------+------------+------------------+
+		| Value | Resolution | Description      |
+		|   0   |  1024x768  | NXP Generic      |
+		|   1   |  1920x1080 | NXP Generic      |
+		|   2   |  1920x1080 | NXP Generic      |
+		|   3   |  1600x900  | Samsung LTM200KT |
+		|   4   |  1920x1080 | Samsung LTM230HT |
+		|   5   |  1366x768  | NXP Generic      |
+		|   6   |  1600x900  | ChiMei M215HGE   |
+		+-------+------------+------------------+
+
+	- video interfaces: Device node can contain video interface port
+			    nodes for panel according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+	lvds-bridge@20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpio = <&gpy2 5 1 0 0>;
+		reset-gpio = <&gpx1 5 1 0 0>;
+		edid-emulation = <5>;
+		ports {
+			port@0 {
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
diff --git a/Bindings/video/dw_hdmi-rockchip.txt b/Bindings/video/dw_hdmi-rockchip.txt
new file mode 100644
index 000000000000..668091f27674
--- /dev/null
+++ b/Bindings/video/dw_hdmi-rockchip.txt
@@ -0,0 +1,46 @@
+Rockchip specific extensions to the Synopsys Designware HDMI
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-dw-hdmi";
+- reg: Physical base address and length of the controller's registers.
+- clocks: phandle to hdmi iahb and isfr clocks.
+- clock-names: should be "iahb" "isfr"
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- interrupts: HDMI interrupt number
+- ports: contain a port node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt. For
+  vopb,set the reg = <0> and set the reg = <1> for vopl.
+- reg-io-width: the width of the reg:1,4, the value should be 4 on
+  rk3288 platform
+
+Optional properties
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
+
+Example:
+hdmi: hdmi@ff980000 {
+	compatible = "rockchip,rk3288-dw-hdmi";
+	reg = <0xff980000 0x20000>;
+	reg-io-width = <4>;
+	ddc-i2c-bus = <&i2c5>;
+	rockchip,grf = <&grf>;
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+	clock-names = "iahb", "isfr";
+	status = "disabled";
+	ports {
+		hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_in_vopb: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vopb_out_hdmi>;
+			};
+			hdmi_in_vopl: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vopl_out_hdmi>;
+			};
+		};
+	};
+};
diff --git a/Bindings/video/exynos7-decon.txt b/Bindings/video/exynos7-decon.txt
new file mode 100644
index 000000000000..f5f9c8d4a55a
--- /dev/null
+++ b/Bindings/video/exynos7-decon.txt
@@ -0,0 +1,68 @@
+Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
+
+DECON (Display and Enhancement Controller) is the Display Controller for the
+Exynos7 series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be "samsung,exynos7-decon";
+
+- reg: physical base address and length of the DECON registers set.
+
+- interrupt-parent: should be the phandle of the decon controller's
+		parent interrupt controller.
+
+- interrupts: should contain a list of all DECON IP block interrupts in the
+		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+		 format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+	"lcd_sys", in the same order as they were listed in the interrupts
+        property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+         clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+               property. Must contain "pclk_decon0", "aclk_decon0",
+	       "decon0_eclk", "decon0_vclk".
+- i80-if-timings: timing configuration for lcd i80 interface support.
+
+Optional Properties:
+- samsung,power-domain: a phandle to DECON power domain node.
+- display-timings: timing settings for DECON, as described in document [1].
+		Can be used in case timings cannot be provided otherwise
+		or to override timings provided by the panel.
+
+[1]: Documentation/devicetree/bindings/video/display-timing.txt
+
+Example:
+
+SoC specific DT entry:
+
+	decon@13930000 {
+		compatible = "samsung,exynos7-decon";
+		interrupt-parent = <&combiner>;
+		reg = <0x13930000 0x1000>;
+		interrupt-names = "lcd_sys", "vsync", "fifo";
+		interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
+		clocks = <&clock_disp PCLK_DECON_INT>,
+			 <&clock_disp ACLK_DECON_INT>,
+			 <&clock_disp SCLK_DECON_INT_ECLK>,
+			 <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
+		clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
+				"decon0_vclk";
+		status = "disabled";
+	};
+
+Board specific DT entry:
+
+	decon@13930000 {
+		pinctrl-0 = <&lcd_clk &pwm1_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
diff --git a/Bindings/video/exynos_dp.txt b/Bindings/video/exynos_dp.txt
index 53dbccfa80ca..7a3a9cdb86ab 100644
--- a/Bindings/video/exynos_dp.txt
+++ b/Bindings/video/exynos_dp.txt
@@ -66,6 +66,10 @@ Optional properties for dp-controller:
 		Hotplug detect GPIO.
 			Indicates which GPIO should be used for hotplug
 			detection
+	-video interfaces: Device node can contain video interface port
+			    nodes according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:
 
@@ -105,4 +109,12 @@ Board Specific portion:
 				vsync-len = <6>;
 			};
 		};
+
+		ports {
+			port@0 {
+				dp_out: endpoint {
+					remote-endpoint = <&bridge_in>;
+				};
+			};
+		};
 	};
diff --git a/Bindings/video/exynos_dsim.txt b/Bindings/video/exynos_dsim.txt
index 31036c667d54..802aa7ef64e5 100644
--- a/Bindings/video/exynos_dsim.txt
+++ b/Bindings/video/exynos_dsim.txt
@@ -2,7 +2,9 @@ Exynos MIPI DSI Master
 
 Required properties:
   - compatible: value should be one of the following
+		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
+		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
   - reg: physical base address and length of the registers set for the device
   - interrupts: should contain DSI interrupt
@@ -19,7 +21,7 @@ Required properties:
     according to DSI host bindings (see MIPI DSI bindings [1])
 
 Optional properties:
-  - samsung,power-domain: a phandle to DSIM power domain node
+  - power-domains: a phandle to DSIM power domain node
 
 Child nodes:
   Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
@@ -51,7 +53,7 @@ Example:
 		phy-names = "dsim";
 		vddcore-supply = <&vusb_reg>;
 		vddio-supply = <&vmipi_reg>;
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		samsung,pll-clock-frequency = <24000000>;
diff --git a/Bindings/video/exynos_mixer.txt b/Bindings/video/exynos_mixer.txt
index 08b394b1edbf..3e38128f866b 100644
--- a/Bindings/video/exynos_mixer.txt
+++ b/Bindings/video/exynos_mixer.txt
@@ -15,6 +15,7 @@ Required properties:
 	a) mixer: Gate of Mixer IP bus clock.
 	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
                mixer mux.
+	c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
 
 Example:
 
diff --git a/Bindings/video/fsl,imx-fb.txt b/Bindings/video/fsl,imx-fb.txt
index 0329f60d431e..8c8c2f4e4c3f 100644
--- a/Bindings/video/fsl,imx-fb.txt
+++ b/Bindings/video/fsl,imx-fb.txt
@@ -20,7 +20,7 @@ Optional properties:
 	register is not modified as recommended by the datasheet.
 - fsl,lpccr: Contrast Control Register value. This property provides the
 	default value for the contrast control register.
-	If that property is ommited, the register is zeroed.
+	If that property is omitted, the register is zeroed.
 - fsl,lscr1: LCDC Sharp Configuration Register value.
 
 Example:
diff --git a/Bindings/video/renesas,du.txt b/Bindings/video/renesas,du.txt
new file mode 100644
index 000000000000..c902323928f7
--- /dev/null
+++ b/Bindings/video/renesas,du.txt
@@ -0,0 +1,88 @@
+* Renesas R-Car Display Unit (DU)
+
+Required Properties:
+
+  - compatible: must be one of the following.
+    - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
+    - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
+    - "renesas,du-r8a7791" for R8A7791 (R-Car M2) compatible DU
+
+  - reg: A list of base address and length of each memory resource, one for
+    each entry in the reg-names property.
+  - reg-names: Name of the memory resources. The DU requires one memory
+    resource for the DU core (named "du") and one memory resource for each
+    LVDS encoder (named "lvds.x" with "x" being the LVDS controller numerical
+    index).
+
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifiers for the DU interrupts.
+
+  - clocks: A list of phandles + clock-specifier pairs, one for each entry in
+    the clock-names property.
+  - clock-names: Name of the clocks. This property is model-dependent.
+    - R8A7779 uses a single functional clock. The clock doesn't need to be
+      named.
+    - R8A7790 and R8A7791 use one functional clock per channel and one clock
+      per LVDS encoder. The functional clocks must be named "du.x" with "x"
+      being the channel numerical index. The LVDS clocks must be named
+      "lvds.x" with "x" being the LVDS encoder numerical index.
+    - In addition to the functional and encoder clocks, all DU versions also
+      support externally supplied pixel clocks. Those clocks are optional.
+      When supplied they must be named "dclkin.x" with "x" being the input
+      clock numerical index.
+
+Required nodes:
+
+The connections to the DU output video ports are modeled using the OF graph
+bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+The following table lists for each supported model the port number
+corresponding to each DU output.
+
+		Port 0		Port1		Port2
+-----------------------------------------------------------------------------
+ R8A7779 (H1)	DPAD 0		DPAD 1		-
+ R8A7790 (H2)	DPAD		LVDS 0		LVDS 1
+ R8A7791 (M2)	DPAD		LVDS 0		-
+
+
+Example: R8A7790 (R-Car H2) DU
+
+	du: du@feb00000 {
+		compatible = "renesas,du-r8a7790";
+		reg = <0 0xfeb00000 0 0x70000>,
+		      <0 0xfeb90000 0 0x1c>,
+		      <0 0xfeb94000 0 0x1c>;
+		reg-names = "du", "lvds.0", "lvds.1";
+		interrupt-parent = <&gic>;
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+		         <&mstp7_clks R8A7790_CLK_DU1>,
+		         <&mstp7_clks R8A7790_CLK_DU2>,
+		         <&mstp7_clks R8A7790_CLK_LVDS0>,
+		         <&mstp7_clks R8A7790_CLK_LVDS1>;
+		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_lvds0: endpoint {
+				};
+			};
+			port@2 {
+				reg = <2>;
+				du_out_lvds1: endpoint {
+				};
+			};
+		};
+	};
diff --git a/Bindings/video/rockchip-drm.txt b/Bindings/video/rockchip-drm.txt
new file mode 100644
index 000000000000..7fff582495a2
--- /dev/null
+++ b/Bindings/video/rockchip-drm.txt
@@ -0,0 +1,19 @@
+Rockchip DRM master device
+================================
+
+The Rockchip DRM master device is a virtual device needed to list all
+vop devices or other display interface nodes that comprise the
+graphics subsystem.
+
+Required properties:
+- compatible: Should be "rockchip,display-subsystem"
+- ports: Should contain a list of phandles pointing to display interface port
+  of vop devices. vop definitions as defined in
+  Documentation/devicetree/bindings/video/rockchip-vop.txt
+
+example:
+
+display-subsystem {
+	compatible = "rockchip,display-subsystem";
+	ports = <&vopl_out>, <&vopb_out>;
+};
diff --git a/Bindings/video/rockchip-vop.txt b/Bindings/video/rockchip-vop.txt
new file mode 100644
index 000000000000..d15351f2313d
--- /dev/null
+++ b/Bindings/video/rockchip-vop.txt
@@ -0,0 +1,58 @@
+device-tree bindings for rockchip soc display controller (vop)
+
+VOP (Visual Output Processor) is the Display Controller for the Rockchip
+series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be one of the following
+		"rockchip,rk3288-vop";
+
+- interrupts: should contain a list of all VOP IP block interrupts in the
+		 order: VSYNC, LCD_SYSTEM. The interrupt specifier
+		 format depends on the interrupt controller used.
+
+- clocks: must include clock specifiers corresponding to entries in the
+		clock-names property.
+
+- clock-names: Must contain
+		aclk_vop: for ddr buffer transfer.
+		hclk_vop: for ahb bus to R/W the phy regs.
+		dclk_vop: pixel clock.
+
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - axi
+  - ahb
+  - dclk
+
+- iommus: required a iommu node
+
+- port: A port node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+SoC specific DT entry:
+	vopb: vopb@ff930000 {
+		compatible = "rockchip,rk3288-vop";
+		reg = <0xff930000 0x19c>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopb_mmu>;
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			vopb_out_edp: endpoint@0 {
+				reg = <0>;
+				remote-endpoint=<&edp_in_vopb>;
+			};
+			vopb_out_hdmi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint=<&hdmi_in_vopb>;
+			};
+		};
+	};
diff --git a/Bindings/video/samsung-fimd.txt b/Bindings/video/samsung-fimd.txt
index ecc899b9817b..a8bbbde03e79 100644
--- a/Bindings/video/samsung-fimd.txt
+++ b/Bindings/video/samsung-fimd.txt
@@ -9,7 +9,9 @@ Required properties:
 		"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
 		"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
 		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
+		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
+		"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
 		"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
 
 - reg: physical base address and length of the FIMD registers set.
@@ -36,7 +38,7 @@ Required properties:
                property. Must contain "sclk_fimd" and "fimd".
 
 Optional Properties:
-- samsung,power-domain: a phandle to FIMD power domain node.
+- power-domains: a phandle to FIMD power domain node.
 - samsung,invert-vden: video enable signal is inverted
 - samsung,invert-vclk: video clock signal is inverted
 - display-timings: timing settings for FIMD, as described in document [1].
@@ -95,7 +97,7 @@ SoC specific DT entry:
 		interrupts = <11 0>, <11 1>, <11 2>;
 		clocks = <&clock 140>, <&clock 283>;
 		clock-names = "sclk_fimd", "fimd";
-		samsung,power-domain = <&pd_lcd0>;
+		power-domains = <&pd_lcd0>;
 		status = "disabled";
 	};
 
diff --git a/Bindings/video/simple-framebuffer-sunxi.txt b/Bindings/video/simple-framebuffer-sunxi.txt
new file mode 100644
index 000000000000..c46ba641a1df
--- /dev/null
+++ b/Bindings/video/simple-framebuffer-sunxi.txt
@@ -0,0 +1,33 @@
+Sunxi specific Simple Framebuffer bindings
+
+This binding documents sunxi specific extensions to the simple-framebuffer
+bindings. The sunxi simplefb u-boot code relies on the devicetree containing
+pre-populated simplefb nodes.
+
+These extensions are intended so that u-boot can select the right node based
+on which pipeline is being used. As such they are solely intended for
+firmware / bootloader use, and the OS should ignore them.
+
+Required properties:
+- compatible: "allwinner,simple-framebuffer"
+- allwinner,pipeline, one of:
+  "de_be0-lcd0"
+  "de_be1-lcd1"
+  "de_be0-lcd0-hdmi"
+  "de_be1-lcd1-hdmi"
+
+Example:
+
+chosen {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	framebuffer@0 {
+		compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+		allwinner,pipeline = "de_be0-lcd0-hdmi";
+		clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+			 <&ahb_gates 44>;
+		status = "disabled";
+	};
+};
diff --git a/Bindings/video/simple-framebuffer.txt b/Bindings/video/simple-framebuffer.txt
index 70c26f3a5b9a..4474ef6e0b95 100644
--- a/Bindings/video/simple-framebuffer.txt
+++ b/Bindings/video/simple-framebuffer.txt
@@ -1,8 +1,40 @@
 Simple Framebuffer
 
-A simple frame-buffer describes a raw memory region that may be rendered to,
-with the assumption that the display hardware has already been set up to scan
-out from that buffer.
+A simple frame-buffer describes a frame-buffer setup by firmware or
+the bootloader, with the assumption that the display hardware has already
+been set up to scan out from the memory pointed to by the reg property.
+
+Since simplefb nodes represent runtime information they must be sub-nodes of
+the chosen node (*). Simplefb nodes must be named "framebuffer@<address>".
+
+If the devicetree contains nodes for the display hardware used by a simplefb,
+then the simplefb node must contain a property called "display", which
+contains a phandle pointing to the primary display hw node, so that the OS
+knows which simplefb to disable when handing over control to a driver for the
+real hardware. The bindings for the hw nodes must specify which node is
+considered the primary node.
+
+It is advised to add display# aliases to help the OS determine how to number
+things. If display# aliases are used, then if the simplefb node contains a
+"display" property then the /aliases/display# path must point to the display
+hw node the "display" property points to, otherwise it must point directly
+to the simplefb node.
+
+If a simplefb node represents the preferred console for user interaction,
+then the chosen node's stdout-path property should point to it, or to the
+primary display hw node, as with display# aliases. If display aliases are
+used then it should be set to the alias instead.
+
+It is advised that devicetree files contain pre-filled, disabled framebuffer
+nodes, so that the firmware only needs to update the mode information and
+enable them. This way if e.g. later on support for more display clocks get
+added, the simplefb nodes will already contain this info and the firmware
+does not need to be updated.
+
+If pre-filled framebuffer nodes are used, the firmware may need extra
+information to find the right node. In that case an extra platform specific
+compatible and platform specific properties should be used and documented,
+see e.g. simple-framebuffer-sunxi.txt .
 
 Required properties:
 - compatible: "simple-framebuffer"
@@ -14,13 +46,41 @@ Required properties:
   - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
   - a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
 
+Optional properties:
+- clocks : List of clocks used by the framebuffer. Clocks listed here
+           are expected to already be configured correctly. The OS must
+           ensure these clocks are not modified or disabled while the
+           simple framebuffer remains active.
+- display : phandle pointing to the primary display hardware node
+
 Example:
 
-	framebuffer {
+aliases {
+	display0 = &lcdc0;
+}
+
+chosen {
+	framebuffer0: framebuffer@1d385000 {
 		compatible = "simple-framebuffer";
 		reg = <0x1d385000 (1600 * 1200 * 2)>;
 		width = <1600>;
 		height = <1200>;
 		stride = <(1600 * 2)>;
 		format = "r5g6b5";
+		clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
+		display = <&lcdc0>;
+	};
+	stdout-path = "display0";
+};
+
+soc@01c00000 {
+	lcdc0: lcdc@1c0c000 {
+		compatible = "allwinner,sun4i-a10-lcdc";
+		...
 	};
+};
+
+
+*) Older devicetree files may have a compatible = "simple-framebuffer" node
+in a different place, operating systems must first enumerate any compatible
+nodes found under chosen and then check for other compatible nodes.
diff --git a/Bindings/video/thine,thc63lvdm83d b/Bindings/video/thine,thc63lvdm83d
new file mode 100644
index 000000000000..527e236e9a2a
--- /dev/null
+++ b/Bindings/video/thine,thc63lvdm83d
@@ -0,0 +1,50 @@
+THine Electronics THC63LVDM83D LVDS serializer
+----------------------------------------------
+
+The THC63LVDM83D is an LVDS serializer designed to support pixel data
+transmission between a host and a flat panel.
+
+Required properties:
+
+- compatible: Should be "thine,thc63lvdm83d"
+
+Optional properties:
+
+- pwdn-gpios: Power down control GPIO
+
+Required nodes:
+
+The THC63LVDM83D has two video ports. Their connections are modeled using the
+OFgraph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for CMOS/TTL input
+- Video port 1 for LVDS output
+
+
+Example
+-------
+
+	lvds_enc: encoder@0 {
+		compatible = "thine,thc63lvdm83d";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_enc_in: endpoint@0 {
+					remote-endpoint = <&rgb_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_enc_out: endpoint@0 {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
diff --git a/Bindings/video/ti,dra7-dss.txt b/Bindings/video/ti,dra7-dss.txt
new file mode 100644
index 000000000000..f33a05137b0e
--- /dev/null
+++ b/Bindings/video/ti,dra7-dss.txt
@@ -0,0 +1,69 @@
+Texas Instruments DRA7x Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,dra7-dss"
+- reg: address and length of the register spaces for 'dss'
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+- syscon: phandle to control module core syscon node
+
+Optional properties:
+
+Some DRA7xx SoCs have one dedicated video PLL, some have two. These properties
+can be used to describe the video PLLs:
+
+- reg: address and length of the register spaces for 'pll1_clkctrl',
+  'pll1', 'pll2_clkctrl', 'pll2'
+- clocks: handle to video1 pll clock and video2 pll clock
+- clock-names: "video1_clk" and "video2_clk"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,dra7-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,dra7-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+       'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+  D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Bindings/video/ti,opa362.txt b/Bindings/video/ti,opa362.txt
new file mode 100644
index 000000000000..f96083c0bd17
--- /dev/null
+++ b/Bindings/video/ti,opa362.txt
@@ -0,0 +1,38 @@
+OPA362 analog video amplifier
+
+Required properties:
+- compatible: "ti,opa362"
+- enable-gpios: enable/disable output gpio
+
+Required node:
+- Video port 0 for opa362 input
+- Video port 1 for opa362 output
+
+Example:
+
+tv_amp: opa362 {
+	compatible = "ti,opa362";
+	enable-gpios = <&gpio1 23 0>;  /* GPIO to enable video out amplifier */
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			opa_in: endpoint@0 {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			opa_out: endpoint@0 {
+				remote-endpoint = <&tv_connector_in>;
+			};
+		};
+	};
+};
+
+
+
diff --git a/Bindings/video/vga-connector.txt b/Bindings/video/vga-connector.txt
new file mode 100644
index 000000000000..c727f298e7ad
--- /dev/null
+++ b/Bindings/video/vga-connector.txt
@@ -0,0 +1,36 @@
+VGA Connector
+=============
+
+Required properties:
+
+- compatible: "vga-connector"
+
+Optional properties:
+
+- label: a symbolic name for the connector corresponding to a hardware label
+- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC
+
+Required nodes:
+
+The VGA connector internal connections are modeled using the OF graph bindings
+specified in Documentation/devicetree/bindings/graph.txt.
+
+The VGA connector has a single port that must be connected to a video source
+port.
+
+
+Example
+-------
+
+vga0: connector@0 {
+	compatible = "vga-connector";
+	label = "vga";
+
+	ddc-i2c-bus = <&i2c3>;
+
+	port {
+		vga_connector_in: endpoint {
+			remote-endpoint = <&adv7123_out>;
+		};
+	};
+};
diff --git a/Bindings/w1/omap-hdq.txt b/Bindings/w1/omap-hdq.txt
new file mode 100644
index 000000000000..fef794741bd1
--- /dev/null
+++ b/Bindings/w1/omap-hdq.txt
@@ -0,0 +1,17 @@
+* OMAP HDQ One wire bus master controller
+
+Required properties:
+- compatible : should be "ti,omap3-1w"
+- reg : Address and length of the register set for the device
+- interrupts : interrupt line.
+- ti,hwmods : "hdq1w"
+
+Example:
+
+- From omap3.dtsi
+  hdqw1w: 1w@480b2000 {
+	compatible = "ti,omap3-1w";
+	reg = <0x480b2000 0x1000>;
+	interrupts = <58>;
+	ti,hwmods = "hdq1w";
+  };
diff --git a/Bindings/watchdog/cadence-wdt.txt b/Bindings/watchdog/cadence-wdt.txt
new file mode 100644
index 000000000000..c3a36ee45552
--- /dev/null
+++ b/Bindings/watchdog/cadence-wdt.txt
@@ -0,0 +1,24 @@
+Zynq Watchdog Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible		: Should be "cdns,wdt-r1p2".
+- clocks		: This is pclk (APB clock).
+- interrupts		: This is wd_irq - watchdog timeout interrupt.
+- interrupt-parent	: Must be core interrupt controller.
+
+Optional properties
+- reset-on-timeout	: If this property exists, then a reset is done
+			  when watchdog times out.
+- timeout-sec		: Watchdog timeout value (in seconds).
+
+Example:
+	watchdog@f8005000 {
+		compatible = "cdns,wdt-r1p2";
+		clocks = <&clkc 45>;
+		interrupt-parent = <&intc>;
+		interrupts = <0 9 1>;
+		reg = <0xf8005000 0x1000>;
+		reset-on-timeout;
+		timeout-sec = <10>;
+	};
diff --git a/Bindings/watchdog/fsl-imx-wdt.txt b/Bindings/watchdog/fsl-imx-wdt.txt
index e52ba2da868c..8dab6fd024aa 100644
--- a/Bindings/watchdog/fsl-imx-wdt.txt
+++ b/Bindings/watchdog/fsl-imx-wdt.txt
@@ -7,7 +7,8 @@ Required properties:
 
 Optional property:
 - big-endian: If present the watchdog device's registers are implemented
-  in big endian mode, otherwise in little mode.
+  in big endian mode, otherwise in native mode(same with CPU), for more
+  detail please see: Documentation/devicetree/bindings/regmap/regmap.txt.
 
 Examples:
 
diff --git a/Bindings/watchdog/gpio-wdt.txt b/Bindings/watchdog/gpio-wdt.txt
index 37afec194949..198794963786 100644
--- a/Bindings/watchdog/gpio-wdt.txt
+++ b/Bindings/watchdog/gpio-wdt.txt
@@ -13,6 +13,11 @@ Required Properties:
     by the GPIO flags.
 - hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds).
 
+Optional Properties:
+- always-running: If the watchdog timer cannot be disabled, add this flag to
+  have the driver keep toggling the signal without a client. It will only cease
+  to toggle the signal when the device is open and the timeout elapsed.
+
 Example:
 	watchdog: watchdog {
 		/* ADM706 */
diff --git a/Bindings/watchdog/imgpdc-wdt.txt b/Bindings/watchdog/imgpdc-wdt.txt
new file mode 100644
index 000000000000..b2fa11fd43de
--- /dev/null
+++ b/Bindings/watchdog/imgpdc-wdt.txt
@@ -0,0 +1,19 @@
+*ImgTec PowerDown Controller (PDC) Watchdog Timer (WDT)
+
+Required properties:
+- compatible : Should be "img,pdc-wdt"
+- reg : Should contain WDT registers location and length
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Should contain "wdt" and "sys"; the watchdog counter
+               clock and register interface clock respectively.
+- interrupts : Should contain WDT interrupt
+
+Examples:
+
+watchdog@18102100 {
+	compatible = "img,pdc-wdt";
+	reg = <0x18102100 0x100>;
+	clocks = <&pdc_wdt_clk>, <&sys_clk>;
+	clock-names = "wdt", "sys";
+	interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Bindings/watchdog/ingenic,jz4740-wdt.txt b/Bindings/watchdog/ingenic,jz4740-wdt.txt
new file mode 100644
index 000000000000..e27763ef0049
--- /dev/null
+++ b/Bindings/watchdog/ingenic,jz4740-wdt.txt
@@ -0,0 +1,12 @@
+Ingenic Watchdog Timer (WDT) Controller for JZ4740
+
+Required properties:
+compatible: "ingenic,jz4740-watchdog"
+reg: Register address and length for watchdog registers
+
+Example:
+
+watchdog: jz4740-watchdog@0x10002000 {
+	compatible = "ingenic,jz4740-watchdog";
+	reg = <0x10002000 0x100>;
+};
diff --git a/Bindings/watchdog/marvel.txt b/Bindings/watchdog/marvel.txt
index 97223fddb7bd..858ed9221ac4 100644
--- a/Bindings/watchdog/marvel.txt
+++ b/Bindings/watchdog/marvel.txt
@@ -17,6 +17,18 @@ For "marvell,armada-375-wdt" and "marvell,armada-380-wdt":
 - reg		: A third entry is mandatory and should contain the
                   shared mask/unmask RSTOUT address.
 
+Clocks required for compatibles = "marvell,orion-wdt",
+				  "marvell,armada-370-wdt":
+- clocks : Must contain a single entry describing the clock input
+
+Clocks required for compatibles = "marvell,armada-xp-wdt"
+				  "marvell,armada-375-wdt"
+				  "marvell,armada-380-wdt":
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  "nbclk" (L2/coherency fabric clock),
+  "fixed" (Reference 25 MHz fixed-clock).
+
 Optional properties:
 
 - interrupts	: Contains the IRQ for watchdog expiration
@@ -30,4 +42,5 @@ Example:
 		interrupts = <3>;
 		timeout-sec = <10>;
 		status = "okay";
+		clocks = <&gate_clk 7>;
 	};
diff --git a/Bindings/watchdog/meson6-wdt.txt b/Bindings/watchdog/meson6-wdt.txt
new file mode 100644
index 000000000000..9200fc2d508c
--- /dev/null
+++ b/Bindings/watchdog/meson6-wdt.txt
@@ -0,0 +1,13 @@
+Meson SoCs Watchdog timer
+
+Required properties:
+
+- compatible : should be "amlogic,meson6-wdt"
+- reg : Specifies base physical address and size of the registers.
+
+Example:
+
+wdt: watchdog@c1109900 {
+	compatible = "amlogic,meson6-wdt";
+	reg = <0xc1109900 0x8>;
+};
diff --git a/Bindings/watchdog/mtk-wdt.txt b/Bindings/watchdog/mtk-wdt.txt
new file mode 100644
index 000000000000..af9eb5b8a253
--- /dev/null
+++ b/Bindings/watchdog/mtk-wdt.txt
@@ -0,0 +1,13 @@
+Mediatek SoCs Watchdog timer
+
+Required properties:
+
+- compatible : should be "mediatek,mt6589-wdt"
+- reg : Specifies base physical address and size of the registers.
+
+Example:
+
+wdt: watchdog@010000000 {
+	compatible = "mediatek,mt6589-wdt";
+	reg = <0x10000000 0x18>;
+};
diff --git a/Bindings/watchdog/qcom-wdt.txt b/Bindings/watchdog/qcom-wdt.txt
new file mode 100644
index 000000000000..4726924d034e
--- /dev/null
+++ b/Bindings/watchdog/qcom-wdt.txt
@@ -0,0 +1,24 @@
+Qualcomm Krait Processor Sub-system (KPSS) Watchdog
+---------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+			"qcom,kpss-wdt-msm8960"
+			"qcom,kpss-wdt-apq8064"
+			"qcom,kpss-wdt-ipq8064"
+
+- reg : shall contain base register location and length
+- clocks : shall contain the input clock
+
+Optional properties :
+- timeout-sec : shall contain the default watchdog timeout in seconds,
+                if unset, the default timeout is 30 seconds
+
+Example:
+	watchdog@208a038 {
+		compatible = "qcom,kpss-wdt-ipq8064";
+		reg = <0x0208a038 0x40>;
+		clocks = <&sleep_clk>;
+		timeout-sec = <10>;
+	};
diff --git a/Bindings/watchdog/samsung-wdt.txt b/Bindings/watchdog/samsung-wdt.txt
index cfff37511aac..8f3d96af81d7 100644
--- a/Bindings/watchdog/samsung-wdt.txt
+++ b/Bindings/watchdog/samsung-wdt.txt
@@ -9,6 +9,7 @@ Required properties:
 	(a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs
 	(b) "samsung,exynos5250-wdt" for Exynos5250
 	(c) "samsung,exynos5420-wdt" for Exynos5420
+	(c) "samsung,exynos7-wdt" for Exynos7
 
 - reg : base physical address of the controller and length of memory mapped
 	region.
diff --git a/Bindings/xillybus/xillybus.txt b/Bindings/xillybus/xillybus.txt
new file mode 100644
index 000000000000..9e316dc2e40f
--- /dev/null
+++ b/Bindings/xillybus/xillybus.txt
@@ -0,0 +1,20 @@
+* Xillybus driver for generic FPGA interface
+
+Required properties:
+- compatible: Should be "xillybus,xillybus-1.00.a"
+- reg: Address and length of the register set for the device
+- interrupts: Contains one interrupt node, typically consisting of three cells.
+- interrupt-parent: the phandle for the interrupt controller that
+                    services interrupts for this device.
+
+Optional properties:
+- dma-coherent: Present if DMA operations are coherent
+
+Example:
+
+	xillybus@ff200400 {
+		compatible = "xillybus,xillybus-1.00.a";
+		reg = < 0xff200400 0x00000080 >;
+		interrupts = < 0 40 1 >;
+		interrupt-parent = <&intc>;
+	} ;
diff --git a/Makefile b/Makefile
index a1c3759ef4a9..5e8930cb93ff 100644
--- a/Makefile
+++ b/Makefile
@@ -62,9 +62,15 @@ endif
 # If the user is running make -s (silent mode), suppress echoing of
 # commands
 
+ifneq ($(filter 4.%,$(MAKE_VERSION)),)	# make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+  quiet=silent_
+endif
+else					# make-3.8x
 ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
   quiet=silent_
 endif
+endif
 
 export quiet Q KBUILD_VERBOSE
 
@@ -76,7 +82,7 @@ clean_%:
 
 ifeq ($(ARCH),)
 
-ALL_DTS		:= $(wildcard src/*/*.dts)
+ALL_DTS		:= $(shell find src/* -name \*.dts)
 
 ALL_DTB		:= $(patsubst %.dts,%.dtb,$(ALL_DTS))
 
@@ -86,7 +92,7 @@ $(ALL_DTB): FORCE
 
 else
 
-ARCH_DTS	:= $(wildcard src/$(ARCH)/*.dts)
+ARCH_DTS	:= $(shell find src/$(ARCH) -name \*.dts)
 
 ARCH_DTB	:= $(patsubst %.dts,%.dtb,$(ARCH_DTS))
 
diff --git a/include/dt-bindings/arm/ux500_pm_domains.h b/include/dt-bindings/arm/ux500_pm_domains.h
new file mode 100644
index 000000000000..398a6c0288d1
--- /dev/null
+++ b/include/dt-bindings/arm/ux500_pm_domains.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ *
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef _DT_BINDINGS_ARM_UX500_PM_DOMAINS_H
+#define _DT_BINDINGS_ARM_UX500_PM_DOMAINS_H
+
+#define DOMAIN_VAPE		0
+
+/* Number of PM domains. */
+#define NR_DOMAINS		(DOMAIN_VAPE + 1)
+
+#endif
diff --git a/include/dt-bindings/clock/alphascale,asm9260.h b/include/dt-bindings/clock/alphascale,asm9260.h
new file mode 100644
index 000000000000..04e8db27daf0
--- /dev/null
+++ b/include/dt-bindings/clock/alphascale,asm9260.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ASM9260_H
+#define _DT_BINDINGS_CLK_ASM9260_H
+
+/* ahb gate */
+#define CLKID_AHB_ROM		0
+#define CLKID_AHB_RAM		1
+#define CLKID_AHB_GPIO		2
+#define CLKID_AHB_MAC		3
+#define CLKID_AHB_EMI		4
+#define CLKID_AHB_USB0		5
+#define CLKID_AHB_USB1		6
+#define CLKID_AHB_DMA0		7
+#define CLKID_AHB_DMA1		8
+#define CLKID_AHB_UART0		9
+#define CLKID_AHB_UART1		10
+#define CLKID_AHB_UART2		11
+#define CLKID_AHB_UART3		12
+#define CLKID_AHB_UART4		13
+#define CLKID_AHB_UART5		14
+#define CLKID_AHB_UART6		15
+#define CLKID_AHB_UART7		16
+#define CLKID_AHB_UART8		17
+#define CLKID_AHB_UART9		18
+#define CLKID_AHB_I2S0		19
+#define CLKID_AHB_I2C0		20
+#define CLKID_AHB_I2C1		21
+#define CLKID_AHB_SSP0		22
+#define CLKID_AHB_IOCONFIG	23
+#define CLKID_AHB_WDT		24
+#define CLKID_AHB_CAN0		25
+#define CLKID_AHB_CAN1		26
+#define CLKID_AHB_MPWM		27
+#define CLKID_AHB_SPI0		28
+#define CLKID_AHB_SPI1		29
+#define CLKID_AHB_QEI		30
+#define CLKID_AHB_QUADSPI0	31
+#define CLKID_AHB_CAMIF		32
+#define CLKID_AHB_LCDIF		33
+#define CLKID_AHB_TIMER0	34
+#define CLKID_AHB_TIMER1	35
+#define CLKID_AHB_TIMER2	36
+#define CLKID_AHB_TIMER3	37
+#define CLKID_AHB_IRQ		38
+#define CLKID_AHB_RTC		39
+#define CLKID_AHB_NAND		40
+#define CLKID_AHB_ADC0		41
+#define CLKID_AHB_LED		42
+#define CLKID_AHB_DAC0		43
+#define CLKID_AHB_LCD		44
+#define CLKID_AHB_I2S1		45
+#define CLKID_AHB_MAC1		46
+
+/* devider */
+#define CLKID_SYS_CPU		47
+#define CLKID_SYS_AHB		48
+#define CLKID_SYS_I2S0M		49
+#define CLKID_SYS_I2S0S		50
+#define CLKID_SYS_I2S1M		51
+#define CLKID_SYS_I2S1S		52
+#define CLKID_SYS_UART0		53
+#define CLKID_SYS_UART1		54
+#define CLKID_SYS_UART2		55
+#define CLKID_SYS_UART3		56
+#define CLKID_SYS_UART4		56
+#define CLKID_SYS_UART5		57
+#define CLKID_SYS_UART6		58
+#define CLKID_SYS_UART7		59
+#define CLKID_SYS_UART8		60
+#define CLKID_SYS_UART9		61
+#define CLKID_SYS_SPI0		62
+#define CLKID_SYS_SPI1		63
+#define CLKID_SYS_QUADSPI	64
+#define CLKID_SYS_SSP0		65
+#define CLKID_SYS_NAND		66
+#define CLKID_SYS_TRACE		67
+#define CLKID_SYS_CAMM		68
+#define CLKID_SYS_WDT		69
+#define CLKID_SYS_CLKOUT	70
+#define CLKID_SYS_MAC		71
+#define CLKID_SYS_LCD		72
+#define CLKID_SYS_ADCANA	73
+
+#define MAX_CLKS		74
+#endif
diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
index b535e9da7de6..961b9c130ea9 100644
--- a/include/dt-bindings/clock/exynos3250.h
+++ b/include/dt-bindings/clock/exynos3250.h
@@ -255,4 +255,31 @@
  */
 #define CLK_NR_CLKS			248
 
+/*
+ * CMU DMC
+ */
+
+#define CLK_FOUT_BPLL			1
+#define CLK_FOUT_EPLL			2
+
+/* Muxes */
+#define CLK_MOUT_MPLL_MIF		8
+#define CLK_MOUT_BPLL			9
+#define CLK_MOUT_DPHY			10
+#define CLK_MOUT_DMC_BUS		11
+#define CLK_MOUT_EPLL			12
+
+/* Dividers */
+#define CLK_DIV_DMC			16
+#define CLK_DIV_DPHY			17
+#define CLK_DIV_DMC_PRE			18
+#define CLK_DIV_DMCP			19
+#define CLK_DIV_DMCD			20
+
+/*
+ * Total number of clocks of main CMU.
+ * NOTE: Must be equal to last clock ID increased by one.
+ */
+#define NR_CLKS_DMC			21
+
 #endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */
diff --git a/include/dt-bindings/clock/exynos4.h b/include/dt-bindings/clock/exynos4.h
index 459bd2bd411f..c4b1676ea674 100644
--- a/include/dt-bindings/clock/exynos4.h
+++ b/include/dt-bindings/clock/exynos4.h
@@ -115,11 +115,11 @@
 #define CLK_SMMU_MFCR		275
 #define CLK_G3D			276
 #define CLK_G2D			277
-#define CLK_ROTATOR		278 /* Exynos4210 only */
-#define CLK_MDMA		279 /* Exynos4210 only */
-#define CLK_SMMU_G2D		280 /* Exynos4210 only */
-#define CLK_SMMU_ROTATOR	281 /* Exynos4210 only */
-#define CLK_SMMU_MDMA		282 /* Exynos4210 only */
+#define CLK_ROTATOR		278
+#define CLK_MDMA		279
+#define CLK_SMMU_G2D		280
+#define CLK_SMMU_ROTATOR	281
+#define CLK_SMMU_MDMA		282
 #define CLK_FIMD0		283
 #define CLK_MIE0		284
 #define CLK_MDNIE0		285 /* Exynos4412 only */
@@ -234,6 +234,8 @@
 #define CLK_MOUT_G3D1		393
 #define CLK_MOUT_G3D		394
 #define CLK_ACLK400_MCUISP	395 /* Exynos4x12 only */
+#define CLK_MOUT_HDMI		396
+#define CLK_MOUT_MIXER		397
 
 /* gate clocks - ppmu */
 #define CLK_PPMULEFT		400
@@ -260,8 +262,13 @@
 #define CLK_DIV_MCUISP1		453 /* Exynos4x12 only */
 #define CLK_DIV_ACLK200		454 /* Exynos4x12 only */
 #define CLK_DIV_ACLK400_MCUISP	455 /* Exynos4x12 only */
+#define CLK_DIV_ACP		456
+#define CLK_DIV_DMC		457
+#define CLK_DIV_C2C		458 /* Exynos4x12 only */
+#define CLK_DIV_GDL		459
+#define CLK_DIV_GDR		460
 
 /* must be greater than maximal clock id */
-#define CLK_NR_CLKS		456
+#define CLK_NR_CLKS		461
 
 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_4_H */
diff --git a/include/dt-bindings/clock/exynos4415.h b/include/dt-bindings/clock/exynos4415.h
new file mode 100644
index 000000000000..7eed55100721
--- /dev/null
+++ b/include/dt-bindings/clock/exynos4415.h
@@ -0,0 +1,360 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for Samsung Exynos4415 clock controllers.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS4415_CLOCK_H
+#define _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS4415_CLOCK_H
+
+/*
+ * Let each exported clock get a unique index, which is used on DT-enabled
+ * platforms to lookup the clock from a clock specifier. These indices are
+ * therefore considered an ABI and so must not be changed. This implies
+ * that new clocks should be added either in free spaces between clock groups
+ * or at the end.
+ */
+
+/*
+ * Main CMU
+ */
+
+#define CLK_OSCSEL			1
+#define CLK_FIN_PLL			2
+#define CLK_FOUT_APLL			3
+#define CLK_FOUT_MPLL			4
+#define CLK_FOUT_EPLL			5
+#define CLK_FOUT_G3D_PLL		6
+#define CLK_FOUT_ISP_PLL		7
+#define CLK_FOUT_DISP_PLL		8
+
+/* Muxes */
+#define CLK_MOUT_MPLL_USER_L		16
+#define CLK_MOUT_GDL			17
+#define CLK_MOUT_MPLL_USER_R		18
+#define CLK_MOUT_GDR			19
+#define CLK_MOUT_EBI			20
+#define CLK_MOUT_ACLK_200		21
+#define CLK_MOUT_ACLK_160		22
+#define CLK_MOUT_ACLK_100		23
+#define CLK_MOUT_ACLK_266		24
+#define CLK_MOUT_G3D_PLL		25
+#define CLK_MOUT_EPLL			26
+#define CLK_MOUT_EBI_1			27
+#define CLK_MOUT_ISP_PLL		28
+#define CLK_MOUT_DISP_PLL		29
+#define CLK_MOUT_MPLL_USER_T		30
+#define CLK_MOUT_ACLK_400_MCUISP	31
+#define CLK_MOUT_G3D_PLLSRC		32
+#define CLK_MOUT_CSIS1			33
+#define CLK_MOUT_CSIS0			34
+#define CLK_MOUT_CAM1			35
+#define CLK_MOUT_FIMC3_LCLK		36
+#define CLK_MOUT_FIMC2_LCLK		37
+#define CLK_MOUT_FIMC1_LCLK		38
+#define CLK_MOUT_FIMC0_LCLK		39
+#define CLK_MOUT_MFC			40
+#define CLK_MOUT_MFC_1			41
+#define CLK_MOUT_MFC_0			42
+#define CLK_MOUT_G3D			43
+#define CLK_MOUT_G3D_1			44
+#define CLK_MOUT_G3D_0			45
+#define CLK_MOUT_MIPI0			46
+#define CLK_MOUT_FIMD0			47
+#define CLK_MOUT_TSADC_ISP		48
+#define CLK_MOUT_UART_ISP		49
+#define CLK_MOUT_SPI1_ISP		50
+#define CLK_MOUT_SPI0_ISP		51
+#define CLK_MOUT_PWM_ISP		52
+#define CLK_MOUT_AUDIO0			53
+#define CLK_MOUT_TSADC			54
+#define CLK_MOUT_MMC2			55
+#define CLK_MOUT_MMC1			56
+#define CLK_MOUT_MMC0			57
+#define CLK_MOUT_UART3			58
+#define CLK_MOUT_UART2			59
+#define CLK_MOUT_UART1			60
+#define CLK_MOUT_UART0			61
+#define CLK_MOUT_SPI2			62
+#define CLK_MOUT_SPI1			63
+#define CLK_MOUT_SPI0			64
+#define CLK_MOUT_SPDIF			65
+#define CLK_MOUT_AUDIO2			66
+#define CLK_MOUT_AUDIO1			67
+#define CLK_MOUT_MPLL_USER_C		68
+#define CLK_MOUT_HPM			69
+#define CLK_MOUT_CORE			70
+#define CLK_MOUT_APLL			71
+#define CLK_MOUT_PXLASYNC_CSIS1_FIMC	72
+#define CLK_MOUT_PXLASYNC_CSIS0_FIMC	73
+#define CLK_MOUT_JPEG			74
+#define CLK_MOUT_JPEG1			75
+#define CLK_MOUT_JPEG0			76
+#define CLK_MOUT_ACLK_ISP0_300		77
+#define CLK_MOUT_ACLK_ISP0_400		78
+#define CLK_MOUT_ACLK_ISP0_300_USER	79
+#define CLK_MOUT_ACLK_ISP1_300		80
+#define CLK_MOUT_ACLK_ISP1_300_USER	81
+#define CLK_MOUT_HDMI			82
+
+/* Dividers */
+#define CLK_DIV_GPL			90
+#define CLK_DIV_GDL			91
+#define CLK_DIV_GPR			92
+#define CLK_DIV_GDR			93
+#define CLK_DIV_ACLK_400_MCUISP		94
+#define CLK_DIV_EBI			95
+#define CLK_DIV_ACLK_200		96
+#define CLK_DIV_ACLK_160		97
+#define CLK_DIV_ACLK_100		98
+#define CLK_DIV_ACLK_266		99
+#define CLK_DIV_CSIS1			100
+#define CLK_DIV_CSIS0			101
+#define CLK_DIV_CAM1			102
+#define CLK_DIV_FIMC3_LCLK		103
+#define CLK_DIV_FIMC2_LCLK		104
+#define CLK_DIV_FIMC1_LCLK		105
+#define CLK_DIV_FIMC0_LCLK		106
+#define CLK_DIV_TV_BLK			107
+#define CLK_DIV_MFC			108
+#define CLK_DIV_G3D			109
+#define CLK_DIV_MIPI0_PRE		110
+#define CLK_DIV_MIPI0			111
+#define CLK_DIV_FIMD0			112
+#define CLK_DIV_UART_ISP		113
+#define CLK_DIV_SPI1_ISP_PRE		114
+#define CLK_DIV_SPI1_ISP		115
+#define CLK_DIV_SPI0_ISP_PRE		116
+#define CLK_DIV_SPI0_ISP		117
+#define CLK_DIV_PWM_ISP			118
+#define CLK_DIV_PCM0			119
+#define CLK_DIV_AUDIO0			120
+#define CLK_DIV_TSADC_PRE		121
+#define CLK_DIV_TSADC			122
+#define CLK_DIV_MMC1_PRE		123
+#define CLK_DIV_MMC1			124
+#define CLK_DIV_MMC0_PRE		125
+#define CLK_DIV_MMC0			126
+#define CLK_DIV_MMC2_PRE		127
+#define CLK_DIV_MMC2			128
+#define CLK_DIV_UART3			129
+#define CLK_DIV_UART2			130
+#define CLK_DIV_UART1			131
+#define CLK_DIV_UART0			132
+#define CLK_DIV_SPI1_PRE		133
+#define CLK_DIV_SPI1			134
+#define CLK_DIV_SPI0_PRE		135
+#define CLK_DIV_SPI0			136
+#define CLK_DIV_SPI2_PRE		137
+#define CLK_DIV_SPI2			138
+#define CLK_DIV_PCM2			139
+#define CLK_DIV_AUDIO2			140
+#define CLK_DIV_PCM1			141
+#define CLK_DIV_AUDIO1			142
+#define CLK_DIV_I2S1			143
+#define CLK_DIV_PXLASYNC_CSIS1_FIMC	144
+#define CLK_DIV_PXLASYNC_CSIS0_FIMC	145
+#define CLK_DIV_JPEG			146
+#define CLK_DIV_CORE2			147
+#define CLK_DIV_APLL			148
+#define CLK_DIV_PCLK_DBG		149
+#define CLK_DIV_ATB			150
+#define CLK_DIV_PERIPH			151
+#define CLK_DIV_COREM1			152
+#define CLK_DIV_COREM0			153
+#define CLK_DIV_CORE			154
+#define CLK_DIV_HPM			155
+#define CLK_DIV_COPY			156
+
+/* Gates */
+#define CLK_ASYNC_G3D			180
+#define CLK_ASYNC_MFCL			181
+#define CLK_ASYNC_TVX			182
+#define CLK_PPMULEFT			183
+#define CLK_GPIO_LEFT			184
+#define CLK_PPMUIMAGE			185
+#define CLK_QEMDMA2			186
+#define CLK_QEROTATOR			187
+#define CLK_SMMUMDMA2			188
+#define CLK_SMMUROTATOR			189
+#define CLK_MDMA2			190
+#define CLK_ROTATOR			191
+#define CLK_ASYNC_ISPMX			192
+#define CLK_ASYNC_MAUDIOX		193
+#define CLK_ASYNC_MFCR			194
+#define CLK_ASYNC_FSYSD			195
+#define CLK_ASYNC_LCD0X			196
+#define CLK_ASYNC_CAMX			197
+#define CLK_PPMURIGHT			198
+#define CLK_GPIO_RIGHT			199
+#define CLK_ANTIRBK_APBIF		200
+#define CLK_EFUSE_WRITER_APBIF		201
+#define CLK_MONOCNT			202
+#define CLK_TZPC6			203
+#define CLK_PROVISIONKEY1		204
+#define CLK_PROVISIONKEY0		205
+#define CLK_CMU_ISPPART			206
+#define CLK_TMU_APBIF			207
+#define CLK_KEYIF			208
+#define CLK_RTC				209
+#define CLK_WDT				210
+#define CLK_MCT				211
+#define CLK_SECKEY			212
+#define CLK_HDMI_CEC			213
+#define CLK_TZPC5			214
+#define CLK_TZPC4			215
+#define CLK_TZPC3			216
+#define CLK_TZPC2			217
+#define CLK_TZPC1			218
+#define CLK_TZPC0			219
+#define CLK_CMU_COREPART		220
+#define CLK_CMU_TOPPART			221
+#define CLK_PMU_APBIF			222
+#define CLK_SYSREG			223
+#define CLK_CHIP_ID			224
+#define CLK_SMMUFIMC_LITE2		225
+#define CLK_FIMC_LITE2			226
+#define CLK_PIXELASYNCM1		227
+#define CLK_PIXELASYNCM0		228
+#define CLK_PPMUCAMIF			229
+#define CLK_SMMUJPEG			230
+#define CLK_SMMUFIMC3			231
+#define CLK_SMMUFIMC2			232
+#define CLK_SMMUFIMC1			233
+#define CLK_SMMUFIMC0			234
+#define CLK_JPEG			235
+#define CLK_CSIS1			236
+#define CLK_CSIS0			237
+#define CLK_FIMC3			238
+#define CLK_FIMC2			239
+#define CLK_FIMC1			240
+#define CLK_FIMC0			241
+#define CLK_PPMUTV			242
+#define CLK_SMMUTV			243
+#define CLK_HDMI			244
+#define CLK_MIXER			245
+#define CLK_VP				246
+#define CLK_PPMUMFC_R			247
+#define CLK_PPMUMFC_L			248
+#define CLK_SMMUMFC_R			249
+#define CLK_SMMUMFC_L			250
+#define CLK_MFC				251
+#define CLK_PPMUG3D			252
+#define CLK_G3D				253
+#define CLK_PPMULCD0			254
+#define CLK_SMMUFIMD0			255
+#define CLK_DSIM0			256
+#define CLK_SMIES			257
+#define CLK_MIE0			258
+#define CLK_FIMD0			259
+#define CLK_TSADC			260
+#define CLK_PPMUFILE			261
+#define CLK_NFCON			262
+#define CLK_USBDEVICE			263
+#define CLK_USBHOST			264
+#define CLK_SROMC			265
+#define CLK_SDMMC2			266
+#define CLK_SDMMC1			267
+#define CLK_SDMMC0			268
+#define CLK_PDMA1			269
+#define CLK_PDMA0			270
+#define CLK_SPDIF			271
+#define CLK_PWM				272
+#define CLK_PCM2			273
+#define CLK_PCM1			274
+#define CLK_I2S1			275
+#define CLK_SPI2			276
+#define CLK_SPI1			277
+#define CLK_SPI0			278
+#define CLK_I2CHDMI			279
+#define CLK_I2C7			280
+#define CLK_I2C6			281
+#define CLK_I2C5			282
+#define CLK_I2C4			283
+#define CLK_I2C3			284
+#define CLK_I2C2			285
+#define CLK_I2C1			286
+#define CLK_I2C0			287
+#define CLK_UART3			288
+#define CLK_UART2			289
+#define CLK_UART1			290
+#define CLK_UART0			291
+
+/* Special clocks */
+#define CLK_SCLK_PXLAYSNC_CSIS1_FIMC	330
+#define CLK_SCLK_PXLAYSNC_CSIS0_FIMC	331
+#define CLK_SCLK_JPEG			332
+#define CLK_SCLK_CSIS1			333
+#define CLK_SCLK_CSIS0			334
+#define CLK_SCLK_CAM1			335
+#define CLK_SCLK_FIMC3_LCLK		336
+#define CLK_SCLK_FIMC2_LCLK		337
+#define CLK_SCLK_FIMC1_LCLK		338
+#define CLK_SCLK_FIMC0_LCLK		339
+#define CLK_SCLK_PIXEL			340
+#define CLK_SCLK_HDMI			341
+#define CLK_SCLK_MIXER			342
+#define CLK_SCLK_MFC			343
+#define CLK_SCLK_G3D			344
+#define CLK_SCLK_MIPIDPHY4L		345
+#define CLK_SCLK_MIPI0			346
+#define CLK_SCLK_MDNIE0			347
+#define CLK_SCLK_FIMD0			348
+#define CLK_SCLK_PCM0			349
+#define CLK_SCLK_AUDIO0			350
+#define CLK_SCLK_TSADC			351
+#define CLK_SCLK_EBI			352
+#define CLK_SCLK_MMC2			353
+#define CLK_SCLK_MMC1			354
+#define CLK_SCLK_MMC0			355
+#define CLK_SCLK_I2S			356
+#define CLK_SCLK_PCM2			357
+#define CLK_SCLK_PCM1			358
+#define CLK_SCLK_AUDIO2			359
+#define CLK_SCLK_AUDIO1			360
+#define CLK_SCLK_SPDIF			361
+#define CLK_SCLK_SPI2			362
+#define CLK_SCLK_SPI1			363
+#define CLK_SCLK_SPI0			364
+#define CLK_SCLK_UART3			365
+#define CLK_SCLK_UART2			366
+#define CLK_SCLK_UART1			367
+#define CLK_SCLK_UART0			368
+#define CLK_SCLK_HDMIPHY		369
+
+/*
+ * Total number of clocks of main CMU.
+ * NOTE: Must be equal to last clock ID increased by one.
+ */
+#define CLK_NR_CLKS			370
+
+/*
+ * CMU DMC
+ */
+#define CLK_DMC_FOUT_MPLL		1
+#define CLK_DMC_FOUT_BPLL		2
+
+#define CLK_DMC_MOUT_MPLL		3
+#define CLK_DMC_MOUT_BPLL		4
+#define CLK_DMC_MOUT_DPHY		5
+#define CLK_DMC_MOUT_DMC_BUS		6
+
+#define CLK_DMC_DIV_DMC			7
+#define CLK_DMC_DIV_DPHY		8
+#define CLK_DMC_DIV_DMC_PRE		9
+#define CLK_DMC_DIV_DMCP		10
+#define CLK_DMC_DIV_DMCD		11
+#define CLK_DMC_DIV_MPLL_PRE		12
+
+/*
+ * Total number of clocks of CMU_DMC.
+ * NOTE: Must be equal to highest clock ID increased by one.
+ */
+#define NR_CLKS_DMC			13
+
+#endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS4415_CLOCK_H */
diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
index 8dc0913f1775..99da0d117a7d 100644
--- a/include/dt-bindings/clock/exynos5420.h
+++ b/include/dt-bindings/clock/exynos5420.h
@@ -204,6 +204,12 @@
 #define CLK_MOUT_MAUDIO0	643
 #define CLK_MOUT_USER_ACLK333	644
 #define CLK_MOUT_SW_ACLK333	645
+#define CLK_MOUT_USER_ACLK200_DISP1	646
+#define CLK_MOUT_SW_ACLK200	647
+#define CLK_MOUT_USER_ACLK300_DISP1     648
+#define CLK_MOUT_SW_ACLK300     649
+#define CLK_MOUT_USER_ACLK400_DISP1     650
+#define CLK_MOUT_SW_ACLK400     651
 
 /* divider clocks */
 #define CLK_DOUT_PIXEL		768
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
new file mode 100644
index 000000000000..e33c75a3c09d
--- /dev/null
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -0,0 +1,172 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Author: Naveen Krishna Ch <naveenkrishna.ch@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOS7_H
+#define _DT_BINDINGS_CLOCK_EXYNOS7_H
+
+/* TOPC */
+#define DOUT_ACLK_PERIS			1
+#define DOUT_SCLK_BUS0_PLL		2
+#define DOUT_SCLK_BUS1_PLL		3
+#define DOUT_SCLK_CC_PLL		4
+#define DOUT_SCLK_MFC_PLL		5
+#define DOUT_ACLK_CCORE_133		6
+#define DOUT_ACLK_MSCL_532		7
+#define ACLK_MSCL_532			8
+#define DOUT_SCLK_AUD_PLL		9
+#define FOUT_AUD_PLL			10
+#define TOPC_NR_CLK			11
+
+/* TOP0 */
+#define DOUT_ACLK_PERIC1		1
+#define DOUT_ACLK_PERIC0		2
+#define CLK_SCLK_UART0			3
+#define CLK_SCLK_UART1			4
+#define CLK_SCLK_UART2			5
+#define CLK_SCLK_UART3			6
+#define CLK_SCLK_SPI0			7
+#define CLK_SCLK_SPI1			8
+#define CLK_SCLK_SPI2			9
+#define CLK_SCLK_SPI3			10
+#define CLK_SCLK_SPI4			11
+#define CLK_SCLK_SPDIF			12
+#define CLK_SCLK_PCM1			13
+#define CLK_SCLK_I2S1			14
+#define TOP0_NR_CLK			15
+
+/* TOP1 */
+#define DOUT_ACLK_FSYS1_200		1
+#define DOUT_ACLK_FSYS0_200		2
+#define DOUT_SCLK_MMC2			3
+#define DOUT_SCLK_MMC1			4
+#define DOUT_SCLK_MMC0			5
+#define CLK_SCLK_MMC2			6
+#define CLK_SCLK_MMC1			7
+#define CLK_SCLK_MMC0			8
+#define TOP1_NR_CLK			9
+
+/* CCORE */
+#define PCLK_RTC			1
+#define CCORE_NR_CLK			2
+
+/* PERIC0 */
+#define PCLK_UART0			1
+#define SCLK_UART0			2
+#define PCLK_HSI2C0			3
+#define PCLK_HSI2C1			4
+#define PCLK_HSI2C4			5
+#define PCLK_HSI2C5			6
+#define PCLK_HSI2C9			7
+#define PCLK_HSI2C10			8
+#define PCLK_HSI2C11			9
+#define PCLK_PWM			10
+#define SCLK_PWM			11
+#define PCLK_ADCIF			12
+#define PERIC0_NR_CLK			13
+
+/* PERIC1 */
+#define PCLK_UART1			1
+#define PCLK_UART2			2
+#define PCLK_UART3			3
+#define SCLK_UART1			4
+#define SCLK_UART2			5
+#define SCLK_UART3			6
+#define PCLK_HSI2C2			7
+#define PCLK_HSI2C3			8
+#define PCLK_HSI2C6			9
+#define PCLK_HSI2C7			10
+#define PCLK_HSI2C8			11
+#define PCLK_SPI0			12
+#define PCLK_SPI1			13
+#define PCLK_SPI2			14
+#define PCLK_SPI3			15
+#define PCLK_SPI4			16
+#define SCLK_SPI0			17
+#define SCLK_SPI1			18
+#define SCLK_SPI2			19
+#define SCLK_SPI3			20
+#define SCLK_SPI4			21
+#define PCLK_I2S1			22
+#define PCLK_PCM1			23
+#define PCLK_SPDIF			24
+#define SCLK_I2S1			25
+#define SCLK_PCM1			26
+#define SCLK_SPDIF			27
+#define PERIC1_NR_CLK			28
+
+/* PERIS */
+#define PCLK_CHIPID			1
+#define SCLK_CHIPID			2
+#define PCLK_WDT			3
+#define PCLK_TMU			4
+#define SCLK_TMU			5
+#define PERIS_NR_CLK			6
+
+/* FSYS0 */
+#define ACLK_MMC2			1
+#define ACLK_AXIUS_USBDRD30X_FSYS0X	2
+#define ACLK_USBDRD300			3
+#define SCLK_USBDRD300_SUSPENDCLK	4
+#define SCLK_USBDRD300_REFCLK		5
+#define PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER		6
+#define PHYCLK_USBDRD300_UDRD30_PHYCLK_USER		7
+#define OSCCLK_PHY_CLKOUT_USB30_PHY		8
+#define ACLK_PDMA0			9
+#define ACLK_PDMA1			10
+#define FSYS0_NR_CLK			11
+
+/* FSYS1 */
+#define ACLK_MMC1			1
+#define ACLK_MMC0			2
+#define FSYS1_NR_CLK			3
+
+/* MSCL */
+#define USERMUX_ACLK_MSCL_532		1
+#define DOUT_PCLK_MSCL			2
+#define ACLK_MSCL_0			3
+#define ACLK_MSCL_1			4
+#define ACLK_JPEG			5
+#define ACLK_G2D			6
+#define ACLK_LH_ASYNC_SI_MSCL_0		7
+#define ACLK_LH_ASYNC_SI_MSCL_1		8
+#define ACLK_AXI2ACEL_BRIDGE		9
+#define ACLK_XIU_MSCLX_0		10
+#define ACLK_XIU_MSCLX_1		11
+#define ACLK_QE_MSCL_0			12
+#define ACLK_QE_MSCL_1			13
+#define ACLK_QE_JPEG			14
+#define ACLK_QE_G2D			15
+#define ACLK_PPMU_MSCL_0		16
+#define ACLK_PPMU_MSCL_1		17
+#define ACLK_MSCLNP_133			18
+#define ACLK_AHB2APB_MSCL0P		19
+#define ACLK_AHB2APB_MSCL1P		20
+
+#define PCLK_MSCL_0			21
+#define PCLK_MSCL_1			22
+#define PCLK_JPEG			23
+#define PCLK_G2D			24
+#define PCLK_QE_MSCL_0			25
+#define PCLK_QE_MSCL_1			26
+#define PCLK_QE_JPEG			27
+#define PCLK_QE_G2D			28
+#define PCLK_PPMU_MSCL_0		29
+#define PCLK_PPMU_MSCL_1		30
+#define PCLK_AXI2ACEL_BRIDGE		31
+#define PCLK_PMU_MSCL			32
+#define MSCL_NR_CLK			33
+
+/* AUD */
+#define SCLK_I2S			1
+#define SCLK_PCM			2
+#define PCLK_I2S			3
+#define PCLK_PCM			4
+#define ACLK_ADMA			5
+#define AUD_NR_CLK			6
+#endif /* _DT_BINDINGS_CLOCK_EXYNOS7_H */
diff --git a/include/dt-bindings/clock/hix5hd2-clock.h b/include/dt-bindings/clock/hix5hd2-clock.h
index aad579a75802..fd29c174ba63 100644
--- a/include/dt-bindings/clock/hix5hd2-clock.h
+++ b/include/dt-bindings/clock/hix5hd2-clock.h
@@ -46,6 +46,7 @@
 #define HIX5HD2_SFC_MUX			64
 #define HIX5HD2_MMC_MUX			65
 #define HIX5HD2_FEPHY_MUX		66
+#define HIX5HD2_SD_MUX			67
 
 /* gate clocks */
 #define HIX5HD2_SFC_RST			128
@@ -53,6 +54,32 @@
 #define HIX5HD2_MMC_CIU_CLK		130
 #define HIX5HD2_MMC_BIU_CLK		131
 #define HIX5HD2_MMC_CIU_RST		132
+#define HIX5HD2_FWD_BUS_CLK		133
+#define HIX5HD2_FWD_SYS_CLK		134
+#define HIX5HD2_MAC0_PHY_CLK		135
+#define HIX5HD2_SD_CIU_CLK		136
+#define HIX5HD2_SD_BIU_CLK		137
+#define HIX5HD2_SD_CIU_RST		138
+#define HIX5HD2_WDG0_CLK		139
+#define HIX5HD2_WDG0_RST		140
+#define HIX5HD2_I2C0_CLK		141
+#define HIX5HD2_I2C0_RST		142
+#define HIX5HD2_I2C1_CLK		143
+#define HIX5HD2_I2C1_RST		144
+#define HIX5HD2_I2C2_CLK		145
+#define HIX5HD2_I2C2_RST		146
+#define HIX5HD2_I2C3_CLK		147
+#define HIX5HD2_I2C3_RST		148
+#define HIX5HD2_I2C4_CLK		149
+#define HIX5HD2_I2C4_RST		150
+#define HIX5HD2_I2C5_CLK		151
+#define HIX5HD2_I2C5_RST		152
+
+/* complex */
+#define HIX5HD2_MAC0_CLK		192
+#define HIX5HD2_MAC1_CLK		193
+#define HIX5HD2_SATA_CLK		194
+#define HIX5HD2_USB_CLK			195
 
 #define HIX5HD2_NR_CLKS			256
 #endif	/* __DTS_HIX5HD2_CLOCK_H */
diff --git a/include/dt-bindings/clock/imx5-clock.h b/include/dt-bindings/clock/imx5-clock.h
index 5f2667ecd98e..f4b7478e23c8 100644
--- a/include/dt-bindings/clock/imx5-clock.h
+++ b/include/dt-bindings/clock/imx5-clock.h
@@ -198,6 +198,9 @@
 #define IMX5_CLK_OCRAM			186
 #define IMX5_CLK_SAHARA_IPG_GATE	187
 #define IMX5_CLK_SATA_REF		188
-#define IMX5_CLK_END			189
+#define IMX5_CLK_STEP_SEL		189
+#define IMX5_CLK_CPU_PODF_SEL		190
+#define IMX5_CLK_ARM			191
+#define IMX5_CLK_END			192
 
 #endif /* __DT_BINDINGS_CLOCK_IMX5_H */
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index 654151e24288..b690cdba163b 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -62,8 +62,8 @@
 #define IMX6QDL_CLK_USDHC3_SEL			50
 #define IMX6QDL_CLK_USDHC4_SEL			51
 #define IMX6QDL_CLK_ENFC_SEL			52
-#define IMX6QDL_CLK_EMI_SEL			53
-#define IMX6QDL_CLK_EMI_SLOW_SEL		54
+#define IMX6QDL_CLK_EIM_SEL			53
+#define IMX6QDL_CLK_EIM_SLOW_SEL		54
 #define IMX6QDL_CLK_VDO_AXI_SEL			55
 #define IMX6QDL_CLK_VPU_AXI_SEL			56
 #define IMX6QDL_CLK_CKO1_SEL			57
@@ -106,8 +106,8 @@
 #define IMX6QDL_CLK_USDHC4_PODF			94
 #define IMX6QDL_CLK_ENFC_PRED			95
 #define IMX6QDL_CLK_ENFC_PODF			96
-#define IMX6QDL_CLK_EMI_PODF			97
-#define IMX6QDL_CLK_EMI_SLOW_PODF		98
+#define IMX6QDL_CLK_EIM_PODF			97
+#define IMX6QDL_CLK_EIM_SLOW_PODF		98
 #define IMX6QDL_CLK_VPU_AXI_PODF		99
 #define IMX6QDL_CLK_CKO1_PODF			100
 #define IMX6QDL_CLK_AXI				101
@@ -128,7 +128,7 @@
 #define IMX6Q_CLK_ECSPI5			116
 #define IMX6DL_CLK_I2C4				116
 #define IMX6QDL_CLK_ENET			117
-#define IMX6QDL_CLK_ESAI			118
+#define IMX6QDL_CLK_ESAI_EXTAL			118
 #define IMX6QDL_CLK_GPT_IPG			119
 #define IMX6QDL_CLK_GPT_IPG_PER			120
 #define IMX6QDL_CLK_GPU2D_CORE			121
@@ -218,7 +218,36 @@
 #define IMX6QDL_CLK_LVDS2_SEL			205
 #define IMX6QDL_CLK_LVDS1_GATE			206
 #define IMX6QDL_CLK_LVDS2_GATE			207
-#define IMX6QDL_CLK_ESAI_AHB			208
-#define IMX6QDL_CLK_END				209
+#define IMX6QDL_CLK_ESAI_IPG			208
+#define IMX6QDL_CLK_ESAI_MEM			209
+#define IMX6QDL_CLK_ASRC_IPG			210
+#define IMX6QDL_CLK_ASRC_MEM			211
+#define IMX6QDL_CLK_LVDS1_IN			212
+#define IMX6QDL_CLK_LVDS2_IN			213
+#define IMX6QDL_CLK_ANACLK1			214
+#define IMX6QDL_CLK_ANACLK2			215
+#define IMX6QDL_PLL1_BYPASS_SRC			216
+#define IMX6QDL_PLL2_BYPASS_SRC			217
+#define IMX6QDL_PLL3_BYPASS_SRC			218
+#define IMX6QDL_PLL4_BYPASS_SRC			219
+#define IMX6QDL_PLL5_BYPASS_SRC			220
+#define IMX6QDL_PLL6_BYPASS_SRC			221
+#define IMX6QDL_PLL7_BYPASS_SRC			222
+#define IMX6QDL_CLK_PLL1			223
+#define IMX6QDL_CLK_PLL2			224
+#define IMX6QDL_CLK_PLL3			225
+#define IMX6QDL_CLK_PLL4			226
+#define IMX6QDL_CLK_PLL5			227
+#define IMX6QDL_CLK_PLL6			228
+#define IMX6QDL_CLK_PLL7			229
+#define IMX6QDL_PLL1_BYPASS			230
+#define IMX6QDL_PLL2_BYPASS			231
+#define IMX6QDL_PLL3_BYPASS			232
+#define IMX6QDL_PLL4_BYPASS			233
+#define IMX6QDL_PLL5_BYPASS			234
+#define IMX6QDL_PLL6_BYPASS			235
+#define IMX6QDL_PLL7_BYPASS			236
+#define IMX6QDL_CLK_GPT_3M			237
+#define IMX6QDL_CLK_END				238
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
diff --git a/include/dt-bindings/clock/imx6sl-clock.h b/include/dt-bindings/clock/imx6sl-clock.h
index b91dd462ba85..9ce4e421096f 100644
--- a/include/dt-bindings/clock/imx6sl-clock.h
+++ b/include/dt-bindings/clock/imx6sl-clock.h
@@ -146,6 +146,34 @@
 #define IMX6SL_CLK_PLL4_AUDIO_DIV	133
 #define IMX6SL_CLK_SPBA			134
 #define IMX6SL_CLK_ENET			135
-#define IMX6SL_CLK_END			136
+#define IMX6SL_CLK_LVDS1_SEL		136
+#define IMX6SL_CLK_LVDS1_OUT		137
+#define IMX6SL_CLK_LVDS1_IN		138
+#define IMX6SL_CLK_ANACLK1		139
+#define IMX6SL_PLL1_BYPASS_SRC		140
+#define IMX6SL_PLL2_BYPASS_SRC		141
+#define IMX6SL_PLL3_BYPASS_SRC		142
+#define IMX6SL_PLL4_BYPASS_SRC		143
+#define IMX6SL_PLL5_BYPASS_SRC		144
+#define IMX6SL_PLL6_BYPASS_SRC		145
+#define IMX6SL_PLL7_BYPASS_SRC		146
+#define IMX6SL_CLK_PLL1			147
+#define IMX6SL_CLK_PLL2			148
+#define IMX6SL_CLK_PLL3			149
+#define IMX6SL_CLK_PLL4			150
+#define IMX6SL_CLK_PLL5			151
+#define IMX6SL_CLK_PLL6			152
+#define IMX6SL_CLK_PLL7			153
+#define IMX6SL_PLL1_BYPASS		154
+#define IMX6SL_PLL2_BYPASS		155
+#define IMX6SL_PLL3_BYPASS		156
+#define IMX6SL_PLL4_BYPASS		157
+#define IMX6SL_PLL5_BYPASS		158
+#define IMX6SL_PLL6_BYPASS		159
+#define IMX6SL_PLL7_BYPASS		160
+#define IMX6SL_CLK_SSI1_IPG		161
+#define IMX6SL_CLK_SSI2_IPG		162
+#define IMX6SL_CLK_SSI3_IPG		163
+#define IMX6SL_CLK_END			164
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6SL_H */
diff --git a/include/dt-bindings/clock/imx6sx-clock.h b/include/dt-bindings/clock/imx6sx-clock.h
index 421d8bb76f2f..995709119ec5 100644
--- a/include/dt-bindings/clock/imx6sx-clock.h
+++ b/include/dt-bindings/clock/imx6sx-clock.h
@@ -251,6 +251,29 @@
 #define IMX6SX_CLK_SAI2_IPG		238
 #define IMX6SX_CLK_ESAI_IPG		239
 #define IMX6SX_CLK_ESAI_MEM		240
-#define IMX6SX_CLK_CLK_END		241
+#define IMX6SX_CLK_LVDS1_IN		241
+#define IMX6SX_CLK_ANACLK1		242
+#define IMX6SX_PLL1_BYPASS_SRC		243
+#define IMX6SX_PLL2_BYPASS_SRC		244
+#define IMX6SX_PLL3_BYPASS_SRC		245
+#define IMX6SX_PLL4_BYPASS_SRC		246
+#define IMX6SX_PLL5_BYPASS_SRC		247
+#define IMX6SX_PLL6_BYPASS_SRC		248
+#define IMX6SX_PLL7_BYPASS_SRC		249
+#define IMX6SX_CLK_PLL1			250
+#define IMX6SX_CLK_PLL2			251
+#define IMX6SX_CLK_PLL3			252
+#define IMX6SX_CLK_PLL4			253
+#define IMX6SX_CLK_PLL5			254
+#define IMX6SX_CLK_PLL6			255
+#define IMX6SX_CLK_PLL7			256
+#define IMX6SX_PLL1_BYPASS		257
+#define IMX6SX_PLL2_BYPASS		258
+#define IMX6SX_PLL3_BYPASS		259
+#define IMX6SX_PLL4_BYPASS		260
+#define IMX6SX_PLL5_BYPASS		261
+#define IMX6SX_PLL6_BYPASS		262
+#define IMX6SX_PLL7_BYPASS		263
+#define IMX6SX_CLK_CLK_END		264
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6SX_H */
diff --git a/include/dt-bindings/clock/marvell,mmp2.h b/include/dt-bindings/clock/marvell,mmp2.h
new file mode 100644
index 000000000000..591f7fba89e2
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,mmp2.h
@@ -0,0 +1,74 @@
+#ifndef __DTS_MARVELL_MMP2_CLOCK_H
+#define __DTS_MARVELL_MMP2_CLOCK_H
+
+/* fixed clocks and plls */
+#define MMP2_CLK_CLK32			1
+#define MMP2_CLK_VCTCXO			2
+#define MMP2_CLK_PLL1			3
+#define MMP2_CLK_PLL1_2			8
+#define MMP2_CLK_PLL1_4			9
+#define MMP2_CLK_PLL1_8			10
+#define MMP2_CLK_PLL1_16		11
+#define MMP2_CLK_PLL1_3			12
+#define MMP2_CLK_PLL1_6			13
+#define MMP2_CLK_PLL1_12		14
+#define MMP2_CLK_PLL1_20		15
+#define MMP2_CLK_PLL2			16
+#define MMP2_CLK_PLL2_2			17
+#define MMP2_CLK_PLL2_4			18
+#define MMP2_CLK_PLL2_8			19
+#define MMP2_CLK_PLL2_16		20
+#define MMP2_CLK_PLL2_3			21
+#define MMP2_CLK_PLL2_6			22
+#define MMP2_CLK_PLL2_12		23
+#define MMP2_CLK_VCTCXO_2		24
+#define MMP2_CLK_VCTCXO_4		25
+#define MMP2_CLK_UART_PLL		26
+#define MMP2_CLK_USB_PLL		27
+
+/* apb periphrals */
+#define MMP2_CLK_TWSI0			60
+#define MMP2_CLK_TWSI1			61
+#define MMP2_CLK_TWSI2			62
+#define MMP2_CLK_TWSI3			63
+#define MMP2_CLK_TWSI4			64
+#define MMP2_CLK_TWSI5			65
+#define MMP2_CLK_GPIO			66
+#define MMP2_CLK_KPC			67
+#define MMP2_CLK_RTC			68
+#define MMP2_CLK_PWM0			69
+#define MMP2_CLK_PWM1			70
+#define MMP2_CLK_PWM2			71
+#define MMP2_CLK_PWM3			72
+#define MMP2_CLK_UART0			73
+#define MMP2_CLK_UART1			74
+#define MMP2_CLK_UART2			75
+#define MMP2_CLK_UART3			76
+#define MMP2_CLK_SSP0			77
+#define MMP2_CLK_SSP1			78
+#define MMP2_CLK_SSP2			79
+#define MMP2_CLK_SSP3			80
+
+/* axi periphrals */
+#define MMP2_CLK_SDH0			101
+#define MMP2_CLK_SDH1			102
+#define MMP2_CLK_SDH2			103
+#define MMP2_CLK_SDH3			104
+#define MMP2_CLK_USB			105
+#define MMP2_CLK_DISP0			106
+#define MMP2_CLK_DISP0_MUX		107
+#define MMP2_CLK_DISP0_SPHY		108
+#define MMP2_CLK_DISP1			109
+#define MMP2_CLK_DISP1_MUX		110
+#define MMP2_CLK_CCIC_ARBITER		111
+#define MMP2_CLK_CCIC0			112
+#define MMP2_CLK_CCIC0_MIX		113
+#define MMP2_CLK_CCIC0_PHY		114
+#define MMP2_CLK_CCIC0_SPHY		115
+#define MMP2_CLK_CCIC1			116
+#define MMP2_CLK_CCIC1_MIX		117
+#define MMP2_CLK_CCIC1_PHY		118
+#define MMP2_CLK_CCIC1_SPHY		119
+
+#define MMP2_NR_CLKS			200
+#endif
diff --git a/include/dt-bindings/clock/marvell,pxa168.h b/include/dt-bindings/clock/marvell,pxa168.h
new file mode 100644
index 000000000000..79630b9d74b8
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,pxa168.h
@@ -0,0 +1,57 @@
+#ifndef __DTS_MARVELL_PXA168_CLOCK_H
+#define __DTS_MARVELL_PXA168_CLOCK_H
+
+/* fixed clocks and plls */
+#define PXA168_CLK_CLK32		1
+#define PXA168_CLK_VCTCXO		2
+#define PXA168_CLK_PLL1			3
+#define PXA168_CLK_PLL1_2		8
+#define PXA168_CLK_PLL1_4		9
+#define PXA168_CLK_PLL1_8		10
+#define PXA168_CLK_PLL1_16		11
+#define PXA168_CLK_PLL1_6		12
+#define PXA168_CLK_PLL1_12		13
+#define PXA168_CLK_PLL1_24		14
+#define PXA168_CLK_PLL1_48		15
+#define PXA168_CLK_PLL1_96		16
+#define PXA168_CLK_PLL1_13		17
+#define PXA168_CLK_PLL1_13_1_5		18
+#define PXA168_CLK_PLL1_2_1_5		19
+#define PXA168_CLK_PLL1_3_16		20
+#define PXA168_CLK_UART_PLL		27
+
+/* apb periphrals */
+#define PXA168_CLK_TWSI0		60
+#define PXA168_CLK_TWSI1		61
+#define PXA168_CLK_TWSI2		62
+#define PXA168_CLK_TWSI3		63
+#define PXA168_CLK_GPIO			64
+#define PXA168_CLK_KPC			65
+#define PXA168_CLK_RTC			66
+#define PXA168_CLK_PWM0			67
+#define PXA168_CLK_PWM1			68
+#define PXA168_CLK_PWM2			69
+#define PXA168_CLK_PWM3			70
+#define PXA168_CLK_UART0		71
+#define PXA168_CLK_UART1		72
+#define PXA168_CLK_UART2		73
+#define PXA168_CLK_SSP0			74
+#define PXA168_CLK_SSP1			75
+#define PXA168_CLK_SSP2			76
+#define PXA168_CLK_SSP3			77
+#define PXA168_CLK_SSP4			78
+
+/* axi periphrals */
+#define PXA168_CLK_DFC			100
+#define PXA168_CLK_SDH0			101
+#define PXA168_CLK_SDH1			102
+#define PXA168_CLK_SDH2			103
+#define PXA168_CLK_USB			104
+#define PXA168_CLK_SPH			105
+#define PXA168_CLK_DISP0		106
+#define PXA168_CLK_CCIC0		107
+#define PXA168_CLK_CCIC0_PHY		108
+#define PXA168_CLK_CCIC0_SPHY		109
+
+#define PXA168_NR_CLKS			200
+#endif
diff --git a/include/dt-bindings/clock/marvell,pxa910.h b/include/dt-bindings/clock/marvell,pxa910.h
new file mode 100644
index 000000000000..719cffb2bea2
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,pxa910.h
@@ -0,0 +1,54 @@
+#ifndef __DTS_MARVELL_PXA910_CLOCK_H
+#define __DTS_MARVELL_PXA910_CLOCK_H
+
+/* fixed clocks and plls */
+#define PXA910_CLK_CLK32		1
+#define PXA910_CLK_VCTCXO		2
+#define PXA910_CLK_PLL1			3
+#define PXA910_CLK_PLL1_2		8
+#define PXA910_CLK_PLL1_4		9
+#define PXA910_CLK_PLL1_8		10
+#define PXA910_CLK_PLL1_16		11
+#define PXA910_CLK_PLL1_6		12
+#define PXA910_CLK_PLL1_12		13
+#define PXA910_CLK_PLL1_24		14
+#define PXA910_CLK_PLL1_48		15
+#define PXA910_CLK_PLL1_96		16
+#define PXA910_CLK_PLL1_13		17
+#define PXA910_CLK_PLL1_13_1_5		18
+#define PXA910_CLK_PLL1_2_1_5		19
+#define PXA910_CLK_PLL1_3_16		20
+#define PXA910_CLK_UART_PLL		27
+
+/* apb periphrals */
+#define PXA910_CLK_TWSI0		60
+#define PXA910_CLK_TWSI1		61
+#define PXA910_CLK_TWSI2		62
+#define PXA910_CLK_TWSI3		63
+#define PXA910_CLK_GPIO			64
+#define PXA910_CLK_KPC			65
+#define PXA910_CLK_RTC			66
+#define PXA910_CLK_PWM0			67
+#define PXA910_CLK_PWM1			68
+#define PXA910_CLK_PWM2			69
+#define PXA910_CLK_PWM3			70
+#define PXA910_CLK_UART0		71
+#define PXA910_CLK_UART1		72
+#define PXA910_CLK_UART2		73
+#define PXA910_CLK_SSP0			74
+#define PXA910_CLK_SSP1			75
+
+/* axi periphrals */
+#define PXA910_CLK_DFC			100
+#define PXA910_CLK_SDH0			101
+#define PXA910_CLK_SDH1			102
+#define PXA910_CLK_SDH2			103
+#define PXA910_CLK_USB			104
+#define PXA910_CLK_SPH			105
+#define PXA910_CLK_DISP0		106
+#define PXA910_CLK_CCIC0		107
+#define PXA910_CLK_CCIC0_PHY		108
+#define PXA910_CLK_CCIC0_SPHY		109
+
+#define PXA910_NR_CLKS			200
+#endif
diff --git a/include/dt-bindings/clock/maxim,max77686.h b/include/dt-bindings/clock/maxim,max77686.h
new file mode 100644
index 000000000000..7b28b0905869
--- /dev/null
+++ b/include/dt-bindings/clock/maxim,max77686.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clocks for the Maxim 77686 PMIC.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_MAXIM_MAX77686_CLOCK_H
+#define _DT_BINDINGS_CLOCK_MAXIM_MAX77686_CLOCK_H
+
+/* Fixed rate clocks. */
+
+#define MAX77686_CLK_AP		0
+#define MAX77686_CLK_CP		1
+#define MAX77686_CLK_PMIC	2
+
+/* Total number of clocks. */
+#define MAX77686_CLKS_NUM		(MAX77686_CLK_PMIC + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_MAXIM_MAX77686_CLOCK_H */
diff --git a/include/dt-bindings/clock/maxim,max77802.h b/include/dt-bindings/clock/maxim,max77802.h
new file mode 100644
index 000000000000..997312edcbb5
--- /dev/null
+++ b/include/dt-bindings/clock/maxim,max77802.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants clocks for the Maxim 77802 PMIC.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H
+#define _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H
+
+/* Fixed rate clocks. */
+
+#define MAX77802_CLK_32K_AP		0
+#define MAX77802_CLK_32K_CP		1
+
+/* Total number of clocks. */
+#define MAX77802_CLKS_NUM		(MAX77802_CLK_32K_CP + 1)
+
+#endif /* _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H */
diff --git a/include/dt-bindings/clock/pxa-clock.h b/include/dt-bindings/clock/pxa-clock.h
new file mode 100644
index 000000000000..e65803b1dc7e
--- /dev/null
+++ b/include/dt-bindings/clock/pxa-clock.h
@@ -0,0 +1,77 @@
+/*
+ * Inspired by original work from pxa2xx-regs.h by Nicolas Pitre
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_PXA2XX_H__
+#define __DT_BINDINGS_CLOCK_PXA2XX_H__
+
+#define CLK_NONE 0
+#define CLK_1WIRE 1
+#define CLK_AC97 2
+#define CLK_AC97CONF 3
+#define CLK_ASSP 4
+#define CLK_BOOT 5
+#define CLK_BTUART 6
+#define CLK_CAMERA 7
+#define CLK_CIR 8
+#define CLK_CORE 9
+#define CLK_DMC 10
+#define CLK_FFUART 11
+#define CLK_FICP 12
+#define CLK_GPIO 13
+#define CLK_HSIO2 14
+#define CLK_HWUART 15
+#define CLK_I2C 16
+#define CLK_I2S 17
+#define CLK_IM 18
+#define CLK_INC 19
+#define CLK_ISC 20
+#define CLK_KEYPAD 21
+#define CLK_LCD 22
+#define CLK_MEMC 23
+#define CLK_MEMSTK 24
+#define CLK_MINI_IM 25
+#define CLK_MINI_LCD 26
+#define CLK_MMC 27
+#define CLK_MMC1 28
+#define CLK_MMC2 29
+#define CLK_MMC3 30
+#define CLK_MSL 31
+#define CLK_MSL0 32
+#define CLK_MVED 33
+#define CLK_NAND 34
+#define CLK_NSSP 35
+#define CLK_OSTIMER 36
+#define CLK_PWM0 37
+#define CLK_PWM1 38
+#define CLK_PWM2 39
+#define CLK_PWM3 40
+#define CLK_PWRI2C 41
+#define CLK_PXA300_GCU 42
+#define CLK_PXA320_GCU 43
+#define CLK_SMC 44
+#define CLK_SSP 45
+#define CLK_SSP1 46
+#define CLK_SSP2 47
+#define CLK_SSP3 48
+#define CLK_SSP4 49
+#define CLK_STUART 50
+#define CLK_TOUCH 51
+#define CLK_TPM 52
+#define CLK_UDC 53
+#define CLK_USB 54
+#define CLK_USB2 55
+#define CLK_USBH 56
+#define CLK_USBHOST 57
+#define CLK_USIM 58
+#define CLK_USIM1 59
+#define CLK_USMI0 60
+#define CLK_MAX 61
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
index b857cadb0bd4..04fb29ae30e6 100644
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -238,7 +238,6 @@
 #define PLL0_VOTE				221
 #define PLL3					222
 #define PLL3_VOTE				223
-#define PLL4					224
 #define PLL4_VOTE				225
 #define PLL8					226
 #define PLL8_VOTE				227
diff --git a/include/dt-bindings/clock/qcom,lcc-ipq806x.h b/include/dt-bindings/clock/qcom,lcc-ipq806x.h
new file mode 100644
index 000000000000..4e944b85c56d
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,lcc-ipq806x.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_LCC_IPQ806X_H
+#define _DT_BINDINGS_CLK_LCC_IPQ806X_H
+
+#define PLL4				0
+#define MI2S_OSR_SRC			1
+#define MI2S_OSR_CLK			2
+#define MI2S_DIV_CLK			3
+#define MI2S_BIT_DIV_CLK		4
+#define MI2S_BIT_CLK			5
+#define PCM_SRC				6
+#define PCM_CLK_OUT			7
+#define PCM_CLK				8
+#define SPDIF_SRC			9
+#define SPDIF_CLK			10
+#define AHBIX_CLK			11
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,lcc-msm8960.h b/include/dt-bindings/clock/qcom,lcc-msm8960.h
new file mode 100644
index 000000000000..4fb2aa64d9fe
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,lcc-msm8960.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_LCC_MSM8960_H
+#define _DT_BINDINGS_CLK_LCC_MSM8960_H
+
+#define PLL4				0
+#define MI2S_OSR_SRC			1
+#define MI2S_OSR_CLK			2
+#define MI2S_DIV_CLK			3
+#define MI2S_BIT_DIV_CLK		4
+#define MI2S_BIT_CLK			5
+#define PCM_SRC				6
+#define PCM_CLK_OUT			7
+#define PCM_CLK				8
+#define SLIMBUS_SRC			9
+#define AUDIO_SLIMBUS_CLK		10
+#define SPS_SLIMBUS_CLK			11
+#define CODEC_I2S_MIC_OSR_SRC		12
+#define CODEC_I2S_MIC_OSR_CLK		13
+#define CODEC_I2S_MIC_DIV_CLK		14
+#define CODEC_I2S_MIC_BIT_DIV_CLK	15
+#define CODEC_I2S_MIC_BIT_CLK		16
+#define SPARE_I2S_MIC_OSR_SRC		17
+#define SPARE_I2S_MIC_OSR_CLK		18
+#define SPARE_I2S_MIC_DIV_CLK		19
+#define SPARE_I2S_MIC_BIT_DIV_CLK	20
+#define SPARE_I2S_MIC_BIT_CLK		21
+#define CODEC_I2S_SPKR_OSR_SRC		22
+#define CODEC_I2S_SPKR_OSR_CLK		23
+#define CODEC_I2S_SPKR_DIV_CLK		24
+#define CODEC_I2S_SPKR_BIT_DIV_CLK	25
+#define CODEC_I2S_SPKR_BIT_CLK		26
+#define SPARE_I2S_SPKR_OSR_SRC		27
+#define SPARE_I2S_SPKR_OSR_CLK		28
+#define SPARE_I2S_SPKR_DIV_CLK		29
+#define SPARE_I2S_SPKR_BIT_DIV_CLK	30
+#define SPARE_I2S_SPKR_BIT_CLK		31
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,mmcc-apq8084.h b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
index a929f86d0ddd..d72b5b35f15e 100644
--- a/include/dt-bindings/clock/qcom,mmcc-apq8084.h
+++ b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
@@ -60,7 +60,7 @@
 #define ESC1_CLK_SRC			43
 #define HDMI_CLK_SRC			44
 #define VSYNC_CLK_SRC			45
-#define RBCPR_CLK_SRC			46
+#define MMSS_RBCPR_CLK_SRC		46
 #define RBBMTIMER_CLK_SRC		47
 #define MAPLE_CLK_SRC			48
 #define VDP_CLK_SRC			49
diff --git a/include/dt-bindings/clock/r8a7740-clock.h b/include/dt-bindings/clock/r8a7740-clock.h
new file mode 100644
index 000000000000..476135da0f23
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7740-clock.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7740_H__
+#define __DT_BINDINGS_CLOCK_R8A7740_H__
+
+/* CPG */
+#define R8A7740_CLK_SYSTEM	0
+#define R8A7740_CLK_PLLC0	1
+#define R8A7740_CLK_PLLC1	2
+#define R8A7740_CLK_PLLC2	3
+#define R8A7740_CLK_R		4
+#define R8A7740_CLK_USB24S	5
+#define R8A7740_CLK_I		6
+#define R8A7740_CLK_ZG		7
+#define R8A7740_CLK_B		8
+#define R8A7740_CLK_M1		9
+#define R8A7740_CLK_HP		10
+#define R8A7740_CLK_HPP		11
+#define R8A7740_CLK_USBP	12
+#define R8A7740_CLK_S		13
+#define R8A7740_CLK_ZB		14
+#define R8A7740_CLK_M3		15
+#define R8A7740_CLK_CP		16
+
+/* MSTP1 */
+#define R8A7740_CLK_CEU21	28
+#define R8A7740_CLK_CEU20	27
+#define R8A7740_CLK_TMU0	25
+#define R8A7740_CLK_LCDC1	17
+#define R8A7740_CLK_IIC0	16
+#define R8A7740_CLK_TMU1	11
+#define R8A7740_CLK_LCDC0	0
+
+/* MSTP2 */
+#define R8A7740_CLK_SCIFA6	30
+#define R8A7740_CLK_INTCA	29
+#define R8A7740_CLK_SCIFA7	22
+#define R8A7740_CLK_DMAC1	18
+#define R8A7740_CLK_DMAC2	17
+#define R8A7740_CLK_DMAC3	16
+#define R8A7740_CLK_USBDMAC	14
+#define R8A7740_CLK_SCIFA5	7
+#define R8A7740_CLK_SCIFB	6
+#define R8A7740_CLK_SCIFA0	4
+#define R8A7740_CLK_SCIFA1	3
+#define R8A7740_CLK_SCIFA2	2
+#define R8A7740_CLK_SCIFA3	1
+#define R8A7740_CLK_SCIFA4	0
+
+/* MSTP3 */
+#define R8A7740_CLK_CMT1	29
+#define R8A7740_CLK_FSI		28
+#define R8A7740_CLK_IIC1	23
+#define R8A7740_CLK_USBF	20
+#define R8A7740_CLK_SDHI0	14
+#define R8A7740_CLK_SDHI1	13
+#define R8A7740_CLK_MMC		12
+#define R8A7740_CLK_GETHER	9
+#define R8A7740_CLK_TPU0	4
+
+/* MSTP4 */
+#define R8A7740_CLK_USBH	16
+#define R8A7740_CLK_SDHI2	15
+#define R8A7740_CLK_USBFUNC	7
+#define R8A7740_CLK_USBPHY	6
+
+/* SUBCK* */
+#define R8A7740_CLK_SUBCK	9
+#define R8A7740_CLK_SUBCK2	10
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7740_H__ */
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index f929a79e6998..91940271cf83 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -26,7 +26,18 @@
 #define R8A7790_CLK_MSIOF0		0
 
 /* MSTP1 */
+#define R8A7790_CLK_VCP1		0
+#define R8A7790_CLK_VCP0		1
+#define R8A7790_CLK_VPC1		2
+#define R8A7790_CLK_VPC0		3
+#define R8A7790_CLK_JPU			6
+#define R8A7790_CLK_SSP1		9
 #define R8A7790_CLK_TMU1		11
+#define R8A7790_CLK_3DG			12
+#define R8A7790_CLK_2DDMAC		15
+#define R8A7790_CLK_FDP1_2		17
+#define R8A7790_CLK_FDP1_1		18
+#define R8A7790_CLK_FDP1_0		19
 #define R8A7790_CLK_TMU3		21
 #define R8A7790_CLK_TMU2		22
 #define R8A7790_CLK_CMT0		24
@@ -67,6 +78,8 @@
 #define R8A7790_CLK_USBDMAC1		31
 
 /* MSTP5 */
+#define R8A7790_CLK_AUDIO_DMAC1		1
+#define R8A7790_CLK_AUDIO_DMAC0		2
 #define R8A7790_CLK_THERMAL		22
 #define R8A7790_CLK_PWM			23
 
@@ -84,6 +97,7 @@
 #define R8A7790_CLK_LVDS0		26
 
 /* MSTP8 */
+#define R8A7790_CLK_MLB			2
 #define R8A7790_CLK_VIN3		8
 #define R8A7790_CLK_VIN2		9
 #define R8A7790_CLK_VIN1		10
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index f0d4d1049162..f096f3f6c16a 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -25,7 +25,15 @@
 #define R8A7791_CLK_MSIOF0		0
 
 /* MSTP1 */
+#define R8A7791_CLK_VCP0		1
+#define R8A7791_CLK_VPC0		3
+#define R8A7791_CLK_JPU			6
+#define R8A7791_CLK_SSP1		9
 #define R8A7791_CLK_TMU1		11
+#define R8A7791_CLK_3DG			12
+#define R8A7791_CLK_2DDMAC		15
+#define R8A7791_CLK_FDP1_1		18
+#define R8A7791_CLK_FDP1_0		19
 #define R8A7791_CLK_TMU3		21
 #define R8A7791_CLK_TMU2		22
 #define R8A7791_CLK_CMT0		24
@@ -61,6 +69,8 @@
 #define R8A7791_CLK_USBDMAC1		31
 
 /* MSTP5 */
+#define R8A7791_CLK_AUDIO_DMAC1		1
+#define R8A7791_CLK_AUDIO_DMAC0		2
 #define R8A7791_CLK_THERMAL		22
 #define R8A7791_CLK_PWM			23
 
@@ -81,6 +91,8 @@
 #define R8A7791_CLK_LVDS0		26
 
 /* MSTP8 */
+#define R8A7791_CLK_IPMMU_SGX		0
+#define R8A7791_CLK_MLB			2
 #define R8A7791_CLK_VIN2		9
 #define R8A7791_CLK_VIN1		10
 #define R8A7791_CLK_VIN0		11
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
new file mode 100644
index 000000000000..d63323032d6e
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7794_H__
+#define __DT_BINDINGS_CLOCK_R8A7794_H__
+
+/* CPG */
+#define R8A7794_CLK_MAIN		0
+#define R8A7794_CLK_PLL0		1
+#define R8A7794_CLK_PLL1		2
+#define R8A7794_CLK_PLL3		3
+#define R8A7794_CLK_LB			4
+#define R8A7794_CLK_QSPI		5
+#define R8A7794_CLK_SDH			6
+#define R8A7794_CLK_SD0			7
+#define R8A7794_CLK_Z			8
+
+/* MSTP0 */
+#define R8A7794_CLK_MSIOF0		0
+
+/* MSTP1 */
+#define R8A7794_CLK_VCP0		1
+#define R8A7794_CLK_VPC0		3
+#define R8A7794_CLK_TMU1		11
+#define R8A7794_CLK_3DG			12
+#define R8A7794_CLK_2DDMAC		15
+#define R8A7794_CLK_FDP1_0		19
+#define R8A7794_CLK_TMU3		21
+#define R8A7794_CLK_TMU2		22
+#define R8A7794_CLK_CMT0		24
+#define R8A7794_CLK_TMU0		25
+#define R8A7794_CLK_VSP1_DU0		28
+#define R8A7794_CLK_VSP1_S		31
+
+/* MSTP2 */
+#define R8A7794_CLK_SCIFA2		2
+#define R8A7794_CLK_SCIFA1		3
+#define R8A7794_CLK_SCIFA0		4
+#define R8A7794_CLK_MSIOF2		5
+#define R8A7794_CLK_SCIFB0		6
+#define R8A7794_CLK_SCIFB1		7
+#define R8A7794_CLK_MSIOF1		8
+#define R8A7794_CLK_SCIFB2		16
+#define R8A7794_CLK_SYS_DMAC1		18
+#define R8A7794_CLK_SYS_DMAC0		19
+
+/* MSTP3 */
+#define R8A7794_CLK_SDHI2		11
+#define R8A7794_CLK_SDHI1		12
+#define R8A7794_CLK_SDHI0		14
+#define R8A7794_CLK_MMCIF0		15
+#define R8A7794_CLK_CMT1		29
+#define R8A7794_CLK_USBDMAC0		30
+#define R8A7794_CLK_USBDMAC1		31
+
+/* MSTP5 */
+#define R8A7794_CLK_THERMAL		22
+#define R8A7794_CLK_PWM			23
+
+/* MSTP7 */
+#define R8A7794_CLK_EHCI		3
+#define R8A7794_CLK_HSUSB		4
+#define R8A7794_CLK_HSCIF2		13
+#define R8A7794_CLK_SCIF5		14
+#define R8A7794_CLK_SCIF4		15
+#define R8A7794_CLK_HSCIF1		16
+#define R8A7794_CLK_HSCIF0		17
+#define R8A7794_CLK_SCIF3		18
+#define R8A7794_CLK_SCIF2		19
+#define R8A7794_CLK_SCIF1		20
+#define R8A7794_CLK_SCIF0		21
+
+/* MSTP8 */
+#define R8A7794_CLK_VIN1		10
+#define R8A7794_CLK_VIN0		11
+#define R8A7794_CLK_ETHER		13
+
+/* MSTP9 */
+#define R8A7794_CLK_GPIO6		5
+#define R8A7794_CLK_GPIO5		7
+#define R8A7794_CLK_GPIO4		8
+#define R8A7794_CLK_GPIO3		9
+#define R8A7794_CLK_GPIO2		10
+#define R8A7794_CLK_GPIO1		11
+#define R8A7794_CLK_GPIO0		12
+#define R8A7794_CLK_QSPI_MOD		17
+#define R8A7794_CLK_I2C5		25
+#define R8A7794_CLK_I2C4		27
+#define R8A7794_CLK_I2C3		28
+#define R8A7794_CLK_I2C2		29
+#define R8A7794_CLK_I2C1		30
+#define R8A7794_CLK_I2C0		31
+
+/* MSTP11 */
+#define R8A7794_CLK_SCIFA3		6
+#define R8A7794_CLK_SCIFA4		7
+#define R8A7794_CLK_SCIFA5		8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7794_H__ */
diff --git a/include/dt-bindings/clock/rk3188-cru-common.h b/include/dt-bindings/clock/rk3188-cru-common.h
index 750ee60e75fb..6a370503c954 100644
--- a/include/dt-bindings/clock/rk3188-cru-common.h
+++ b/include/dt-bindings/clock/rk3188-cru-common.h
@@ -20,6 +20,7 @@
 #define PLL_GPLL		4
 #define CORE_PERI		5
 #define CORE_L2C		6
+#define ARMCLK			7
 
 /* sclk gates (special clocks) */
 #define SCLK_UART0		64
diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
index ebcb460ea4ad..dea419708d73 100644
--- a/include/dt-bindings/clock/rk3288-cru.h
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -19,6 +19,7 @@
 #define PLL_CPLL		3
 #define PLL_GPLL		4
 #define PLL_NPLL		5
+#define ARMCLK			6
 
 /* sclk gates (special clocks) */
 #define SCLK_GPU		64
@@ -61,6 +62,30 @@
 #define SCLK_LCDC_PWM1		101
 #define SCLK_MAC_RX		102
 #define SCLK_MAC_TX		103
+#define SCLK_EDP_24M		104
+#define SCLK_EDP		105
+#define SCLK_RGA		106
+#define SCLK_ISP		107
+#define SCLK_ISP_JPE		108
+#define SCLK_HDMI_HDCP		109
+#define SCLK_HDMI_CEC		110
+#define SCLK_HEVC_CABAC		111
+#define SCLK_HEVC_CORE		112
+#define SCLK_I2S0_OUT		113
+#define SCLK_SDMMC_DRV		114
+#define SCLK_SDIO0_DRV		115
+#define SCLK_SDIO1_DRV		116
+#define SCLK_EMMC_DRV		117
+#define SCLK_SDMMC_SAMPLE	118
+#define SCLK_SDIO0_SAMPLE	119
+#define SCLK_SDIO1_SAMPLE	120
+#define SCLK_EMMC_SAMPLE	121
+#define SCLK_USBPHY480M_SRC	122
+#define SCLK_PVTM_CORE		123
+#define SCLK_PVTM_GPU		124
+
+#define SCLK_MAC		151
+#define SCLK_MACREF_OUT		152
 
 #define DCLK_VOP0		190
 #define DCLK_VOP1		191
@@ -75,6 +100,16 @@
 #define ACLK_VOP1		198
 #define ACLK_CRYPTO		199
 #define ACLK_RGA		200
+#define ACLK_RGA_NIU		201
+#define ACLK_IEP		202
+#define ACLK_VIO0_NIU		203
+#define ACLK_VIP		204
+#define ACLK_ISP		205
+#define ACLK_VIO1_NIU		206
+#define ACLK_HEVC		207
+#define ACLK_VCODEC		208
+#define ACLK_CPU		209
+#define ACLK_PERI		210
 
 /* pclk gates */
 #define PCLK_GPIO0		320
@@ -112,6 +147,20 @@
 #define PCLK_PS2C		352
 #define PCLK_TIMER		353
 #define PCLK_TZPC		354
+#define PCLK_EDP_CTRL		355
+#define PCLK_MIPI_DSI0		356
+#define PCLK_MIPI_DSI1		357
+#define PCLK_MIPI_CSI		358
+#define PCLK_LVDS_PHY		359
+#define PCLK_HDMI_CTRL		360
+#define PCLK_VIO2_H2P		361
+#define PCLK_CPU		362
+#define PCLK_PERI		363
+#define PCLK_DDRUPCTL0		364
+#define PCLK_PUBL0		365
+#define PCLK_DDRUPCTL1		366
+#define PCLK_PUBL1		367
+#define PCLK_WDT		368
 
 /* hclk gates */
 #define HCLK_GPS		448
@@ -137,8 +186,16 @@
 #define HCLK_IEP		468
 #define HCLK_ISP		469
 #define HCLK_RGA		470
+#define HCLK_VIO_AHB_ARBI	471
+#define HCLK_VIO_NIU		472
+#define HCLK_VIP		473
+#define HCLK_VIO2_H2P		474
+#define HCLK_HEVC		475
+#define HCLK_VCODEC		476
+#define HCLK_CPU		477
+#define HCLK_PERI		478
 
-#define CLK_NR_CLKS		(HCLK_RGA + 1)
+#define CLK_NR_CLKS		(HCLK_PERI + 1)
 
 /* soft-reset indices */
 #define SRST_CORE0		0
@@ -276,3 +333,46 @@
 #define SRST_USBHOST1_CON	140
 #define SRST_USB_ADP		141
 #define SRST_ACC_EFUSE		142
+
+#define SRST_CORESIGHT		144
+#define SRST_PD_CORE_AHB_NOC	145
+#define SRST_PD_CORE_APB_NOC	146
+#define SRST_PD_CORE_MP_AXI	147
+#define SRST_GIC		148
+#define SRST_LCDC_PWM0		149
+#define SRST_LCDC_PWM1		150
+#define SRST_VIO0_H2P_BRG	151
+#define SRST_VIO1_H2P_BRG	152
+#define SRST_RGA_H2P_BRG	153
+#define SRST_HEVC		154
+#define SRST_TSADC		159
+
+#define SRST_DDRPHY0		160
+#define SRST_DDRPHY0_APB	161
+#define SRST_DDRCTRL0		162
+#define SRST_DDRCTRL0_APB	163
+#define SRST_DDRPHY0_CTRL	164
+#define SRST_DDRPHY1		165
+#define SRST_DDRPHY1_APB	166
+#define SRST_DDRCTRL1		167
+#define SRST_DDRCTRL1_APB	168
+#define SRST_DDRPHY1_CTRL	169
+#define SRST_DDRMSCH0		170
+#define SRST_DDRMSCH1		171
+#define SRST_CRYPTO		174
+#define SRST_C2C_HOST		175
+
+#define SRST_LCDC1_AXI		176
+#define SRST_LCDC1_AHB		177
+#define SRST_LCDC1_DCLK		178
+#define SRST_UART0		179
+#define SRST_UART1		180
+#define SRST_UART2		181
+#define SRST_UART3		182
+#define SRST_UART4		183
+#define SRST_SIMC		186
+#define SRST_PS2C		187
+#define SRST_TSP		188
+#define SRST_TSP_CLKIN0		189
+#define SRST_TSP_CLKIN1		190
+#define SRST_TSP_27M		191
diff --git a/include/dt-bindings/clock/rockchip,rk808.h b/include/dt-bindings/clock/rockchip,rk808.h
new file mode 100644
index 000000000000..1a873432f965
--- /dev/null
+++ b/include/dt-bindings/clock/rockchip,rk808.h
@@ -0,0 +1,11 @@
+/*
+ * This header provides constants clk index RK808 pmic clkout
+ */
+#ifndef _CLK_ROCKCHIP_RK808
+#define _CLK_ROCKCHIP_RK808
+
+/* CLOCKOUT index */
+#define RK808_CLKOUT0		0
+#define RK808_CLKOUT1		1
+
+#endif
diff --git a/include/dt-bindings/clock/sh73a0-clock.h b/include/dt-bindings/clock/sh73a0-clock.h
new file mode 100644
index 000000000000..1dd3eb2b7d90
--- /dev/null
+++ b/include/dt-bindings/clock/sh73a0-clock.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_SH73A0_H__
+#define __DT_BINDINGS_CLOCK_SH73A0_H__
+
+/* CPG */
+#define SH73A0_CLK_MAIN		0
+#define SH73A0_CLK_PLL0		1
+#define SH73A0_CLK_PLL1		2
+#define SH73A0_CLK_PLL2		3
+#define SH73A0_CLK_PLL3		4
+#define SH73A0_CLK_DSI0PHY	5
+#define SH73A0_CLK_DSI1PHY	6
+#define SH73A0_CLK_ZG		7
+#define SH73A0_CLK_M3		8
+#define SH73A0_CLK_B		9
+#define SH73A0_CLK_M1		10
+#define SH73A0_CLK_M2		11
+#define SH73A0_CLK_Z		12
+#define SH73A0_CLK_ZX		13
+#define SH73A0_CLK_HP		14
+
+/* MSTP0 */
+#define SH73A0_CLK_IIC2	1
+
+/* MSTP1 */
+#define SH73A0_CLK_CEU1		29
+#define SH73A0_CLK_CSI2_RX1	28
+#define SH73A0_CLK_CEU0		27
+#define SH73A0_CLK_CSI2_RX0	26
+#define SH73A0_CLK_TMU0		25
+#define SH73A0_CLK_DSITX0	18
+#define SH73A0_CLK_IIC0		16
+#define SH73A0_CLK_SGX		12
+#define SH73A0_CLK_LCDC0	0
+
+/* MSTP2 */
+#define SH73A0_CLK_SCIFA7	19
+#define SH73A0_CLK_SY_DMAC	18
+#define SH73A0_CLK_MP_DMAC	17
+#define SH73A0_CLK_SCIFA5	7
+#define SH73A0_CLK_SCIFB	6
+#define SH73A0_CLK_SCIFA0	4
+#define SH73A0_CLK_SCIFA1	3
+#define SH73A0_CLK_SCIFA2	2
+#define SH73A0_CLK_SCIFA3	1
+#define SH73A0_CLK_SCIFA4	0
+
+/* MSTP3 */
+#define SH73A0_CLK_SCIFA6	31
+#define SH73A0_CLK_CMT1		29
+#define SH73A0_CLK_FSI		28
+#define SH73A0_CLK_IRDA		25
+#define SH73A0_CLK_IIC1		23
+#define SH73A0_CLK_USB		22
+#define SH73A0_CLK_FLCTL	15
+#define SH73A0_CLK_SDHI0	14
+#define SH73A0_CLK_SDHI1	13
+#define SH73A0_CLK_MMCIF0	12
+#define SH73A0_CLK_SDHI2	11
+#define SH73A0_CLK_TPU0		4
+#define SH73A0_CLK_TPU1		3
+#define SH73A0_CLK_TPU2		2
+#define SH73A0_CLK_TPU3		1
+#define SH73A0_CLK_TPU4		0
+
+/* MSTP4 */
+#define SH73A0_CLK_IIC3		11
+#define SH73A0_CLK_IIC4		10
+#define SH73A0_CLK_KEYSC	3
+
+#endif
diff --git a/include/dt-bindings/clock/stih407-clks.h b/include/dt-bindings/clock/stih407-clks.h
new file mode 100644
index 000000000000..7af2b717b3b2
--- /dev/null
+++ b/include/dt-bindings/clock/stih407-clks.h
@@ -0,0 +1,86 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH407 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH407
+#define _DT_BINDINGS_CLK_STIH407
+
+/* CLOCKGEN C0 */
+#define CLK_ICN_GPU		0
+#define CLK_FDMA		1
+#define CLK_NAND		2
+#define CLK_HVA			3
+#define CLK_PROC_STFE		4
+#define CLK_PROC_TP		5
+#define CLK_RX_ICN_DMU		6
+#define CLK_RX_ICN_DISP_0	6
+#define CLK_RX_ICN_DISP_1	6
+#define CLK_RX_ICN_HVA		7
+#define CLK_RX_ICN_TS		7
+#define CLK_ICN_CPU		8
+#define CLK_TX_ICN_DMU		9
+#define CLK_TX_ICN_HVA		9
+#define CLK_TX_ICN_TS		9
+#define CLK_ICN_COMPO		9
+#define CLK_MMC_0		10
+#define CLK_MMC_1		11
+#define CLK_JPEGDEC		12
+#define CLK_ICN_REG		13
+#define CLK_TRACE_A9		13
+#define CLK_PTI_STM		13
+#define CLK_EXT2F_A9		13
+#define CLK_IC_BDISP_0		14
+#define CLK_IC_BDISP_1		15
+#define CLK_PP_DMU		16
+#define CLK_VID_DMU		17
+#define CLK_DSS_LPC		18
+#define CLK_ST231_AUD_0		19
+#define CLK_ST231_GP_0		19
+#define CLK_ST231_GP_1		20
+#define CLK_ST231_DMU		21
+#define CLK_ICN_LMI		22
+#define CLK_TX_ICN_DISP_0	23
+#define CLK_TX_ICN_DISP_1	23
+#define CLK_ICN_SBC		24
+#define CLK_STFE_FRC2		25
+#define CLK_ETH_PHY		26
+#define CLK_ETH_REF_PHYCLK	27
+#define CLK_FLASH_PROMIP	28
+#define CLK_MAIN_DISP		29
+#define CLK_AUX_DISP		30
+#define CLK_COMPO_DVP		31
+
+/* CLOCKGEN D0 */
+#define CLK_PCM_0		0
+#define CLK_PCM_1		1
+#define CLK_PCM_2		2
+#define CLK_SPDIFF		3
+
+/* CLOCKGEN D2 */
+#define CLK_PIX_MAIN_DISP	0
+#define CLK_PIX_PIP		1
+#define CLK_PIX_GDP1		2
+#define CLK_PIX_GDP2		3
+#define CLK_PIX_GDP3		4
+#define CLK_PIX_GDP4		5
+#define CLK_PIX_AUX_DISP	6
+#define CLK_DENC		7
+#define CLK_PIX_HDDAC		8
+#define CLK_HDDAC		9
+#define CLK_SDDAC		10
+#define CLK_PIX_DVO		11
+#define CLK_DVO			12
+#define CLK_PIX_HDMI		13
+#define CLK_TMDS_HDMI		14
+#define CLK_REF_HDMIPHY		15
+
+/* CLOCKGEN D3 */
+#define CLK_STFE_FRC1		0
+#define CLK_TSOUT_0		1
+#define CLK_TSOUT_1		2
+#define CLK_MCHI		3
+#define CLK_VSENS_COMPO		4
+#define CLK_FRC1_REMOTE		5
+#define CLK_LPC_0		6
+#define CLK_LPC_1		7
+#endif
diff --git a/include/dt-bindings/clock/stih410-clks.h b/include/dt-bindings/clock/stih410-clks.h
new file mode 100644
index 000000000000..2097a4bbe155
--- /dev/null
+++ b/include/dt-bindings/clock/stih410-clks.h
@@ -0,0 +1,25 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH410 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH410
+#define _DT_BINDINGS_CLK_STIH410
+
+#include "stih407-clks.h"
+
+/* STiH410 introduces new clock outputs compared to STiH407 */
+
+/* CLOCKGEN C0 */
+#define CLK_TX_ICN_HADES	32
+#define CLK_RX_ICN_HADES	33
+#define CLK_ICN_REG_16		34
+#define CLK_PP_HADES		35
+#define CLK_CLUST_HADES		36
+#define CLK_HWPE_HADES		37
+#define CLK_FC_HADES		38
+
+/* CLOCKGEN D0 */
+#define CLK_PCMR10_MASTER	4
+#define CLK_USB2_PHY		5
+
+#endif
diff --git a/include/dt-bindings/clock/stih418-clks.h b/include/dt-bindings/clock/stih418-clks.h
new file mode 100644
index 000000000000..b62aa0b20217
--- /dev/null
+++ b/include/dt-bindings/clock/stih418-clks.h
@@ -0,0 +1,34 @@
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH418 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH418
+#define _DT_BINDINGS_CLK_STIH418
+
+#include "stih410-clks.h"
+
+/* STiH418 introduces new clock outputs compared to STiH410 */
+
+/* CLOCKGEN C0 */
+#define CLK_PROC_BDISP_0        14
+#define CLK_PROC_BDISP_1        15
+#define CLK_TX_ICN_1            23
+#define CLK_ETH_PHYREF          27
+#define CLK_PP_HEVC             35
+#define CLK_CLUST_HEVC          36
+#define CLK_HWPE_HEVC           37
+#define CLK_FC_HEVC             38
+#define CLK_PROC_MIXER		39
+#define CLK_PROC_SC		40
+#define CLK_AVSP_HEVC		41
+
+/* CLOCKGEN D2 */
+#undef CLK_PIX_PIP
+#undef CLK_PIX_GDP1
+#undef CLK_PIX_GDP2
+#undef CLK_PIX_GDP3
+#undef CLK_PIX_GDP4
+
+#define CLK_TMDS_HDMI_DIV2	5
+#define CLK_VP9			47
+#endif
diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h
index fc12621fb432..534c03f8ad72 100644
--- a/include/dt-bindings/clock/tegra114-car.h
+++ b/include/dt-bindings/clock/tegra114-car.h
@@ -49,7 +49,7 @@
 #define TEGRA114_CLK_I2S0 30
 /* 31 */
 
-/* 32 */
+#define TEGRA114_CLK_MC 32
 /* 33 */
 #define TEGRA114_CLK_APBDMA 34
 /* 35 */
diff --git a/include/dt-bindings/clock/tegra124-car-common.h b/include/dt-bindings/clock/tegra124-car-common.h
new file mode 100644
index 000000000000..ae2eb17a1658
--- /dev/null
+++ b/include/dt-bindings/clock/tegra124-car-common.h
@@ -0,0 +1,345 @@
+/*
+ * This header provides constants for binding nvidia,tegra124-car or
+ * nvidia,tegra132-car.
+ *
+ * The first 192 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ * registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ * this case, those clocks are assigned IDs above 185 in order to highlight
+ * this issue. Implementations that interpret these clock IDs as bit values
+ * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ * explicitly handle these special cases.
+ *
+ * The balance of the clocks controlled by the CAR are assigned IDs of 185 and
+ * above.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_TEGRA124_CAR_COMMON_H
+#define _DT_BINDINGS_CLOCK_TEGRA124_CAR_COMMON_H
+
+/* 0 */
+/* 1 */
+/* 2 */
+#define TEGRA124_CLK_ISPB 3
+#define TEGRA124_CLK_RTC 4
+#define TEGRA124_CLK_TIMER 5
+#define TEGRA124_CLK_UARTA 6
+/* 7 (register bit affects uartb and vfir) */
+/* 8 */
+#define TEGRA124_CLK_SDMMC2 9
+/* 10 (register bit affects spdif_in and spdif_out) */
+#define TEGRA124_CLK_I2S1 11
+#define TEGRA124_CLK_I2C1 12
+/* 13 */
+#define TEGRA124_CLK_SDMMC1 14
+#define TEGRA124_CLK_SDMMC4 15
+/* 16 */
+#define TEGRA124_CLK_PWM 17
+#define TEGRA124_CLK_I2S2 18
+/* 20 (register bit affects vi and vi_sensor) */
+/* 21 */
+#define TEGRA124_CLK_USBD 22
+#define TEGRA124_CLK_ISP 23
+/* 26 */
+/* 25 */
+#define TEGRA124_CLK_DISP2 26
+#define TEGRA124_CLK_DISP1 27
+#define TEGRA124_CLK_HOST1X 28
+#define TEGRA124_CLK_VCP 29
+#define TEGRA124_CLK_I2S0 30
+/* 31 */
+
+#define TEGRA124_CLK_MC 32
+/* 33 */
+#define TEGRA124_CLK_APBDMA 34
+/* 35 */
+#define TEGRA124_CLK_KBC 36
+/* 37 */
+/* 38 */
+/* 39 (register bit affects fuse and fuse_burn) */
+#define TEGRA124_CLK_KFUSE 40
+#define TEGRA124_CLK_SBC1 41
+#define TEGRA124_CLK_NOR 42
+/* 43 */
+#define TEGRA124_CLK_SBC2 44
+/* 45 */
+#define TEGRA124_CLK_SBC3 46
+#define TEGRA124_CLK_I2C5 47
+#define TEGRA124_CLK_DSIA 48
+/* 49 */
+#define TEGRA124_CLK_MIPI 50
+#define TEGRA124_CLK_HDMI 51
+#define TEGRA124_CLK_CSI 52
+/* 53 */
+#define TEGRA124_CLK_I2C2 54
+#define TEGRA124_CLK_UARTC 55
+#define TEGRA124_CLK_MIPI_CAL 56
+#define TEGRA124_CLK_EMC 57
+#define TEGRA124_CLK_USB2 58
+#define TEGRA124_CLK_USB3 59
+/* 60 */
+#define TEGRA124_CLK_VDE 61
+#define TEGRA124_CLK_BSEA 62
+#define TEGRA124_CLK_BSEV 63
+
+/* 64 */
+#define TEGRA124_CLK_UARTD 65
+/* 66 */
+#define TEGRA124_CLK_I2C3 67
+#define TEGRA124_CLK_SBC4 68
+#define TEGRA124_CLK_SDMMC3 69
+#define TEGRA124_CLK_PCIE 70
+#define TEGRA124_CLK_OWR 71
+#define TEGRA124_CLK_AFI 72
+#define TEGRA124_CLK_CSITE 73
+/* 74 */
+/* 75 */
+#define TEGRA124_CLK_LA 76
+#define TEGRA124_CLK_TRACE 77
+#define TEGRA124_CLK_SOC_THERM 78
+#define TEGRA124_CLK_DTV 79
+/* 80 */
+#define TEGRA124_CLK_I2CSLOW 81
+#define TEGRA124_CLK_DSIB 82
+#define TEGRA124_CLK_TSEC 83
+/* 84 */
+/* 85 */
+/* 86 */
+/* 87 */
+/* 88 */
+#define TEGRA124_CLK_XUSB_HOST 89
+/* 90 */
+#define TEGRA124_CLK_MSENC 91
+#define TEGRA124_CLK_CSUS 92
+/* 93 */
+/* 94 */
+/* 95 (bit affects xusb_dev and xusb_dev_src) */
+
+/* 96 */
+/* 97 */
+/* 98 */
+#define TEGRA124_CLK_MSELECT 99
+#define TEGRA124_CLK_TSENSOR 100
+#define TEGRA124_CLK_I2S3 101
+#define TEGRA124_CLK_I2S4 102
+#define TEGRA124_CLK_I2C4 103
+#define TEGRA124_CLK_SBC5 104
+#define TEGRA124_CLK_SBC6 105
+#define TEGRA124_CLK_D_AUDIO 106
+#define TEGRA124_CLK_APBIF 107
+#define TEGRA124_CLK_DAM0 108
+#define TEGRA124_CLK_DAM1 109
+#define TEGRA124_CLK_DAM2 110
+#define TEGRA124_CLK_HDA2CODEC_2X 111
+/* 112 */
+#define TEGRA124_CLK_AUDIO0_2X 113
+#define TEGRA124_CLK_AUDIO1_2X 114
+#define TEGRA124_CLK_AUDIO2_2X 115
+#define TEGRA124_CLK_AUDIO3_2X 116
+#define TEGRA124_CLK_AUDIO4_2X 117
+#define TEGRA124_CLK_SPDIF_2X 118
+#define TEGRA124_CLK_ACTMON 119
+#define TEGRA124_CLK_EXTERN1 120
+#define TEGRA124_CLK_EXTERN2 121
+#define TEGRA124_CLK_EXTERN3 122
+#define TEGRA124_CLK_SATA_OOB 123
+#define TEGRA124_CLK_SATA 124
+#define TEGRA124_CLK_HDA 125
+/* 126 */
+#define TEGRA124_CLK_SE 127
+
+#define TEGRA124_CLK_HDA2HDMI 128
+#define TEGRA124_CLK_SATA_COLD 129
+/* 130 */
+/* 131 */
+/* 132 */
+/* 133 */
+/* 134 */
+/* 135 */
+/* 136 */
+/* 137 */
+/* 138 */
+/* 139 */
+/* 140 */
+/* 141 */
+/* 142 */
+/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */
+/*      xusb_host_src and xusb_ss_src) */
+#define TEGRA124_CLK_CILAB 144
+#define TEGRA124_CLK_CILCD 145
+#define TEGRA124_CLK_CILE 146
+#define TEGRA124_CLK_DSIALP 147
+#define TEGRA124_CLK_DSIBLP 148
+#define TEGRA124_CLK_ENTROPY 149
+#define TEGRA124_CLK_DDS 150
+/* 151 */
+#define TEGRA124_CLK_DP2 152
+#define TEGRA124_CLK_AMX 153
+#define TEGRA124_CLK_ADX 154
+/* 155 (bit affects dfll_ref and dfll_soc) */
+#define TEGRA124_CLK_XUSB_SS 156
+/* 157 */
+/* 158 */
+/* 159 */
+
+/* 160 */
+/* 161 */
+/* 162 */
+/* 163 */
+/* 164 */
+/* 165 */
+#define TEGRA124_CLK_I2C6 166
+/* 167 */
+/* 168 */
+/* 169 */
+/* 170 */
+#define TEGRA124_CLK_VIM2_CLK 171
+/* 172 */
+/* 173 */
+/* 174 */
+/* 175 */
+#define TEGRA124_CLK_HDMI_AUDIO 176
+#define TEGRA124_CLK_CLK72MHZ 177
+#define TEGRA124_CLK_VIC03 178
+/* 179 */
+#define TEGRA124_CLK_ADX1 180
+#define TEGRA124_CLK_DPAUX 181
+#define TEGRA124_CLK_SOR0 182
+/* 183 */
+#define TEGRA124_CLK_GPU 184
+#define TEGRA124_CLK_AMX1 185
+/* 186 */
+/* 187 */
+/* 188 */
+/* 189 */
+/* 190 */
+/* 191 */
+#define TEGRA124_CLK_UARTB 192
+#define TEGRA124_CLK_VFIR 193
+#define TEGRA124_CLK_SPDIF_IN 194
+#define TEGRA124_CLK_SPDIF_OUT 195
+#define TEGRA124_CLK_VI 196
+#define TEGRA124_CLK_VI_SENSOR 197
+#define TEGRA124_CLK_FUSE 198
+#define TEGRA124_CLK_FUSE_BURN 199
+#define TEGRA124_CLK_CLK_32K 200
+#define TEGRA124_CLK_CLK_M 201
+#define TEGRA124_CLK_CLK_M_DIV2 202
+#define TEGRA124_CLK_CLK_M_DIV4 203
+#define TEGRA124_CLK_PLL_REF 204
+#define TEGRA124_CLK_PLL_C 205
+#define TEGRA124_CLK_PLL_C_OUT1 206
+#define TEGRA124_CLK_PLL_C2 207
+#define TEGRA124_CLK_PLL_C3 208
+#define TEGRA124_CLK_PLL_M 209
+#define TEGRA124_CLK_PLL_M_OUT1 210
+#define TEGRA124_CLK_PLL_P 211
+#define TEGRA124_CLK_PLL_P_OUT1 212
+#define TEGRA124_CLK_PLL_P_OUT2 213
+#define TEGRA124_CLK_PLL_P_OUT3 214
+#define TEGRA124_CLK_PLL_P_OUT4 215
+#define TEGRA124_CLK_PLL_A 216
+#define TEGRA124_CLK_PLL_A_OUT0 217
+#define TEGRA124_CLK_PLL_D 218
+#define TEGRA124_CLK_PLL_D_OUT0 219
+#define TEGRA124_CLK_PLL_D2 220
+#define TEGRA124_CLK_PLL_D2_OUT0 221
+#define TEGRA124_CLK_PLL_U 222
+#define TEGRA124_CLK_PLL_U_480M 223
+
+#define TEGRA124_CLK_PLL_U_60M 224
+#define TEGRA124_CLK_PLL_U_48M 225
+#define TEGRA124_CLK_PLL_U_12M 226
+/* 227 */
+/* 228 */
+#define TEGRA124_CLK_PLL_RE_VCO 229
+#define TEGRA124_CLK_PLL_RE_OUT 230
+#define TEGRA124_CLK_PLL_E 231
+#define TEGRA124_CLK_SPDIF_IN_SYNC 232
+#define TEGRA124_CLK_I2S0_SYNC 233
+#define TEGRA124_CLK_I2S1_SYNC 234
+#define TEGRA124_CLK_I2S2_SYNC 235
+#define TEGRA124_CLK_I2S3_SYNC 236
+#define TEGRA124_CLK_I2S4_SYNC 237
+#define TEGRA124_CLK_VIMCLK_SYNC 238
+#define TEGRA124_CLK_AUDIO0 239
+#define TEGRA124_CLK_AUDIO1 240
+#define TEGRA124_CLK_AUDIO2 241
+#define TEGRA124_CLK_AUDIO3 242
+#define TEGRA124_CLK_AUDIO4 243
+#define TEGRA124_CLK_SPDIF 244
+#define TEGRA124_CLK_CLK_OUT_1 245
+#define TEGRA124_CLK_CLK_OUT_2 246
+#define TEGRA124_CLK_CLK_OUT_3 247
+#define TEGRA124_CLK_BLINK 248
+/* 249 */
+/* 250 */
+/* 251 */
+#define TEGRA124_CLK_XUSB_HOST_SRC 252
+#define TEGRA124_CLK_XUSB_FALCON_SRC 253
+#define TEGRA124_CLK_XUSB_FS_SRC 254
+#define TEGRA124_CLK_XUSB_SS_SRC 255
+
+#define TEGRA124_CLK_XUSB_DEV_SRC 256
+#define TEGRA124_CLK_XUSB_DEV 257
+#define TEGRA124_CLK_XUSB_HS_SRC 258
+#define TEGRA124_CLK_SCLK 259
+#define TEGRA124_CLK_HCLK 260
+#define TEGRA124_CLK_PCLK 261
+/* 262 */
+/* 263 */
+#define TEGRA124_CLK_DFLL_REF 264
+#define TEGRA124_CLK_DFLL_SOC 265
+#define TEGRA124_CLK_VI_SENSOR2 266
+#define TEGRA124_CLK_PLL_P_OUT5 267
+#define TEGRA124_CLK_CML0 268
+#define TEGRA124_CLK_CML1 269
+#define TEGRA124_CLK_PLL_C4 270
+#define TEGRA124_CLK_PLL_DP 271
+#define TEGRA124_CLK_PLL_E_MUX 272
+#define TEGRA124_CLK_PLLD_DSI 273
+/* 274 */
+/* 275 */
+/* 276 */
+/* 277 */
+/* 278 */
+/* 279 */
+/* 280 */
+/* 281 */
+/* 282 */
+/* 283 */
+/* 284 */
+/* 285 */
+/* 286 */
+/* 287 */
+
+/* 288 */
+/* 289 */
+/* 290 */
+/* 291 */
+/* 292 */
+/* 293 */
+/* 294 */
+/* 295 */
+/* 296 */
+/* 297 */
+/* 298 */
+/* 299 */
+#define TEGRA124_CLK_AUDIO0_MUX 300
+#define TEGRA124_CLK_AUDIO1_MUX 301
+#define TEGRA124_CLK_AUDIO2_MUX 302
+#define TEGRA124_CLK_AUDIO3_MUX 303
+#define TEGRA124_CLK_AUDIO4_MUX 304
+#define TEGRA124_CLK_SPDIF_MUX 305
+#define TEGRA124_CLK_CLK_OUT_1_MUX 306
+#define TEGRA124_CLK_CLK_OUT_2_MUX 307
+#define TEGRA124_CLK_CLK_OUT_3_MUX 308
+/* 309 */
+/* 310 */
+#define TEGRA124_CLK_SOR0_LVDS 311
+#define TEGRA124_CLK_XUSB_SS_DIV2 312
+
+#define TEGRA124_CLK_PLL_M_UD 313
+#define TEGRA124_CLK_PLL_C_UD 314
+
+#endif	/* _DT_BINDINGS_CLOCK_TEGRA124_CAR_COMMON_H */
diff --git a/include/dt-bindings/clock/tegra124-car.h b/include/dt-bindings/clock/tegra124-car.h
index 8a4c5892890f..2860737f0443 100644
--- a/include/dt-bindings/clock/tegra124-car.h
+++ b/include/dt-bindings/clock/tegra124-car.h
@@ -1,342 +1,19 @@
 /*
- * This header provides constants for binding nvidia,tegra124-car.
- *
- * The first 192 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
- * registers. These IDs often match those in the CAR's RST_DEVICES registers,
- * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
- * this case, those clocks are assigned IDs above 185 in order to highlight
- * this issue. Implementations that interpret these clock IDs as bit values
- * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
- * explicitly handle these special cases.
- *
- * The balance of the clocks controlled by the CAR are assigned IDs of 185 and
- * above.
+ * This header provides Tegra124-specific constants for binding
+ * nvidia,tegra124-car.
  */
 
+#include <dt-bindings/clock/tegra124-car-common.h>
+
 #ifndef _DT_BINDINGS_CLOCK_TEGRA124_CAR_H
 #define _DT_BINDINGS_CLOCK_TEGRA124_CAR_H
 
-/* 0 */
-/* 1 */
-/* 2 */
-#define TEGRA124_CLK_ISPB 3
-#define TEGRA124_CLK_RTC 4
-#define TEGRA124_CLK_TIMER 5
-#define TEGRA124_CLK_UARTA 6
-/* 7 (register bit affects uartb and vfir) */
-/* 8 */
-#define TEGRA124_CLK_SDMMC2 9
-/* 10 (register bit affects spdif_in and spdif_out) */
-#define TEGRA124_CLK_I2S1 11
-#define TEGRA124_CLK_I2C1 12
-/* 13 */
-#define TEGRA124_CLK_SDMMC1 14
-#define TEGRA124_CLK_SDMMC4 15
-/* 16 */
-#define TEGRA124_CLK_PWM 17
-#define TEGRA124_CLK_I2S2 18
-/* 20 (register bit affects vi and vi_sensor) */
-/* 21 */
-#define TEGRA124_CLK_USBD 22
-#define TEGRA124_CLK_ISP 23
-/* 26 */
-/* 25 */
-#define TEGRA124_CLK_DISP2 26
-#define TEGRA124_CLK_DISP1 27
-#define TEGRA124_CLK_HOST1X 28
-#define TEGRA124_CLK_VCP 29
-#define TEGRA124_CLK_I2S0 30
-/* 31 */
-
-/* 32 */
-/* 33 */
-#define TEGRA124_CLK_APBDMA 34
-/* 35 */
-#define TEGRA124_CLK_KBC 36
-/* 37 */
-/* 38 */
-/* 39 (register bit affects fuse and fuse_burn) */
-#define TEGRA124_CLK_KFUSE 40
-#define TEGRA124_CLK_SBC1 41
-#define TEGRA124_CLK_NOR 42
-/* 43 */
-#define TEGRA124_CLK_SBC2 44
-/* 45 */
-#define TEGRA124_CLK_SBC3 46
-#define TEGRA124_CLK_I2C5 47
-#define TEGRA124_CLK_DSIA 48
-/* 49 */
-#define TEGRA124_CLK_MIPI 50
-#define TEGRA124_CLK_HDMI 51
-#define TEGRA124_CLK_CSI 52
-/* 53 */
-#define TEGRA124_CLK_I2C2 54
-#define TEGRA124_CLK_UARTC 55
-#define TEGRA124_CLK_MIPI_CAL 56
-#define TEGRA124_CLK_EMC 57
-#define TEGRA124_CLK_USB2 58
-#define TEGRA124_CLK_USB3 59
-/* 60 */
-#define TEGRA124_CLK_VDE 61
-#define TEGRA124_CLK_BSEA 62
-#define TEGRA124_CLK_BSEV 63
-
-/* 64 */
-#define TEGRA124_CLK_UARTD 65
-/* 66 */
-#define TEGRA124_CLK_I2C3 67
-#define TEGRA124_CLK_SBC4 68
-#define TEGRA124_CLK_SDMMC3 69
-#define TEGRA124_CLK_PCIE 70
-#define TEGRA124_CLK_OWR 71
-#define TEGRA124_CLK_AFI 72
-#define TEGRA124_CLK_CSITE 73
-/* 74 */
-/* 75 */
-#define TEGRA124_CLK_LA 76
-#define TEGRA124_CLK_TRACE 77
-#define TEGRA124_CLK_SOC_THERM 78
-#define TEGRA124_CLK_DTV 79
-/* 80 */
-#define TEGRA124_CLK_I2CSLOW 81
-#define TEGRA124_CLK_DSIB 82
-#define TEGRA124_CLK_TSEC 83
-/* 84 */
-/* 85 */
-/* 86 */
-/* 87 */
-/* 88 */
-#define TEGRA124_CLK_XUSB_HOST 89
-/* 90 */
-#define TEGRA124_CLK_MSENC 91
-#define TEGRA124_CLK_CSUS 92
-/* 93 */
-/* 94 */
-/* 95 (bit affects xusb_dev and xusb_dev_src) */
-
-/* 96 */
-/* 97 */
-/* 98 */
-#define TEGRA124_CLK_MSELECT 99
-#define TEGRA124_CLK_TSENSOR 100
-#define TEGRA124_CLK_I2S3 101
-#define TEGRA124_CLK_I2S4 102
-#define TEGRA124_CLK_I2C4 103
-#define TEGRA124_CLK_SBC5 104
-#define TEGRA124_CLK_SBC6 105
-#define TEGRA124_CLK_D_AUDIO 106
-#define TEGRA124_CLK_APBIF 107
-#define TEGRA124_CLK_DAM0 108
-#define TEGRA124_CLK_DAM1 109
-#define TEGRA124_CLK_DAM2 110
-#define TEGRA124_CLK_HDA2CODEC_2X 111
-/* 112 */
-#define TEGRA124_CLK_AUDIO0_2X 113
-#define TEGRA124_CLK_AUDIO1_2X 114
-#define TEGRA124_CLK_AUDIO2_2X 115
-#define TEGRA124_CLK_AUDIO3_2X 116
-#define TEGRA124_CLK_AUDIO4_2X 117
-#define TEGRA124_CLK_SPDIF_2X 118
-#define TEGRA124_CLK_ACTMON 119
-#define TEGRA124_CLK_EXTERN1 120
-#define TEGRA124_CLK_EXTERN2 121
-#define TEGRA124_CLK_EXTERN3 122
-#define TEGRA124_CLK_SATA_OOB 123
-#define TEGRA124_CLK_SATA 124
-#define TEGRA124_CLK_HDA 125
-/* 126 */
-#define TEGRA124_CLK_SE 127
-
-#define TEGRA124_CLK_HDA2HDMI 128
-#define TEGRA124_CLK_SATA_COLD 129
-/* 130 */
-/* 131 */
-/* 132 */
-/* 133 */
-/* 134 */
-/* 135 */
-/* 136 */
-/* 137 */
-/* 138 */
-/* 139 */
-/* 140 */
-/* 141 */
-/* 142 */
-/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */
-/*      xusb_host_src and xusb_ss_src) */
-#define TEGRA124_CLK_CILAB 144
-#define TEGRA124_CLK_CILCD 145
-#define TEGRA124_CLK_CILE 146
-#define TEGRA124_CLK_DSIALP 147
-#define TEGRA124_CLK_DSIBLP 148
-#define TEGRA124_CLK_ENTROPY 149
-#define TEGRA124_CLK_DDS 150
-/* 151 */
-#define TEGRA124_CLK_DP2 152
-#define TEGRA124_CLK_AMX 153
-#define TEGRA124_CLK_ADX 154
-/* 155 (bit affects dfll_ref and dfll_soc) */
-#define TEGRA124_CLK_XUSB_SS 156
-/* 157 */
-/* 158 */
-/* 159 */
-
-/* 160 */
-/* 161 */
-/* 162 */
-/* 163 */
-/* 164 */
-/* 165 */
-#define TEGRA124_CLK_I2C6 166
-/* 167 */
-/* 168 */
-/* 169 */
-/* 170 */
-#define TEGRA124_CLK_VIM2_CLK 171
-/* 172 */
-/* 173 */
-/* 174 */
-/* 175 */
-#define TEGRA124_CLK_HDMI_AUDIO 176
-#define TEGRA124_CLK_CLK72MHZ 177
-#define TEGRA124_CLK_VIC03 178
-/* 179 */
-#define TEGRA124_CLK_ADX1 180
-#define TEGRA124_CLK_DPAUX 181
-#define TEGRA124_CLK_SOR0 182
-/* 183 */
-#define TEGRA124_CLK_GPU 184
-#define TEGRA124_CLK_AMX1 185
-/* 186 */
-/* 187 */
-/* 188 */
-/* 189 */
-/* 190 */
-/* 191 */
-#define TEGRA124_CLK_UARTB 192
-#define TEGRA124_CLK_VFIR 193
-#define TEGRA124_CLK_SPDIF_IN 194
-#define TEGRA124_CLK_SPDIF_OUT 195
-#define TEGRA124_CLK_VI 196
-#define TEGRA124_CLK_VI_SENSOR 197
-#define TEGRA124_CLK_FUSE 198
-#define TEGRA124_CLK_FUSE_BURN 199
-#define TEGRA124_CLK_CLK_32K 200
-#define TEGRA124_CLK_CLK_M 201
-#define TEGRA124_CLK_CLK_M_DIV2 202
-#define TEGRA124_CLK_CLK_M_DIV4 203
-#define TEGRA124_CLK_PLL_REF 204
-#define TEGRA124_CLK_PLL_C 205
-#define TEGRA124_CLK_PLL_C_OUT1 206
-#define TEGRA124_CLK_PLL_C2 207
-#define TEGRA124_CLK_PLL_C3 208
-#define TEGRA124_CLK_PLL_M 209
-#define TEGRA124_CLK_PLL_M_OUT1 210
-#define TEGRA124_CLK_PLL_P 211
-#define TEGRA124_CLK_PLL_P_OUT1 212
-#define TEGRA124_CLK_PLL_P_OUT2 213
-#define TEGRA124_CLK_PLL_P_OUT3 214
-#define TEGRA124_CLK_PLL_P_OUT4 215
-#define TEGRA124_CLK_PLL_A 216
-#define TEGRA124_CLK_PLL_A_OUT0 217
-#define TEGRA124_CLK_PLL_D 218
-#define TEGRA124_CLK_PLL_D_OUT0 219
-#define TEGRA124_CLK_PLL_D2 220
-#define TEGRA124_CLK_PLL_D2_OUT0 221
-#define TEGRA124_CLK_PLL_U 222
-#define TEGRA124_CLK_PLL_U_480M 223
-
-#define TEGRA124_CLK_PLL_U_60M 224
-#define TEGRA124_CLK_PLL_U_48M 225
-#define TEGRA124_CLK_PLL_U_12M 226
-#define TEGRA124_CLK_PLL_X 227
-#define TEGRA124_CLK_PLL_X_OUT0 228
-#define TEGRA124_CLK_PLL_RE_VCO 229
-#define TEGRA124_CLK_PLL_RE_OUT 230
-#define TEGRA124_CLK_PLL_E 231
-#define TEGRA124_CLK_SPDIF_IN_SYNC 232
-#define TEGRA124_CLK_I2S0_SYNC 233
-#define TEGRA124_CLK_I2S1_SYNC 234
-#define TEGRA124_CLK_I2S2_SYNC 235
-#define TEGRA124_CLK_I2S3_SYNC 236
-#define TEGRA124_CLK_I2S4_SYNC 237
-#define TEGRA124_CLK_VIMCLK_SYNC 238
-#define TEGRA124_CLK_AUDIO0 239
-#define TEGRA124_CLK_AUDIO1 240
-#define TEGRA124_CLK_AUDIO2 241
-#define TEGRA124_CLK_AUDIO3 242
-#define TEGRA124_CLK_AUDIO4 243
-#define TEGRA124_CLK_SPDIF 244
-#define TEGRA124_CLK_CLK_OUT_1 245
-#define TEGRA124_CLK_CLK_OUT_2 246
-#define TEGRA124_CLK_CLK_OUT_3 247
-#define TEGRA124_CLK_BLINK 248
-/* 249 */
-/* 250 */
-/* 251 */
-#define TEGRA124_CLK_XUSB_HOST_SRC 252
-#define TEGRA124_CLK_XUSB_FALCON_SRC 253
-#define TEGRA124_CLK_XUSB_FS_SRC 254
-#define TEGRA124_CLK_XUSB_SS_SRC 255
+#define TEGRA124_CLK_PLL_X		227
+#define TEGRA124_CLK_PLL_X_OUT0		228
 
-#define TEGRA124_CLK_XUSB_DEV_SRC 256
-#define TEGRA124_CLK_XUSB_DEV 257
-#define TEGRA124_CLK_XUSB_HS_SRC 258
-#define TEGRA124_CLK_SCLK 259
-#define TEGRA124_CLK_HCLK 260
-#define TEGRA124_CLK_PCLK 261
-#define TEGRA124_CLK_CCLK_G 262
-#define TEGRA124_CLK_CCLK_LP 263
-#define TEGRA124_CLK_DFLL_REF 264
-#define TEGRA124_CLK_DFLL_SOC 265
-#define TEGRA124_CLK_VI_SENSOR2 266
-#define TEGRA124_CLK_PLL_P_OUT5 267
-#define TEGRA124_CLK_CML0 268
-#define TEGRA124_CLK_CML1 269
-#define TEGRA124_CLK_PLL_C4 270
-#define TEGRA124_CLK_PLL_DP 271
-#define TEGRA124_CLK_PLL_E_MUX 272
-/* 273 */
-/* 274 */
-/* 275 */
-/* 276 */
-/* 277 */
-/* 278 */
-/* 279 */
-/* 280 */
-/* 281 */
-/* 282 */
-/* 283 */
-/* 284 */
-/* 285 */
-/* 286 */
-/* 287 */
+#define TEGRA124_CLK_CCLK_G		262
+#define TEGRA124_CLK_CCLK_LP		263
 
-/* 288 */
-/* 289 */
-/* 290 */
-/* 291 */
-/* 292 */
-/* 293 */
-/* 294 */
-/* 295 */
-/* 296 */
-/* 297 */
-/* 298 */
-/* 299 */
-#define TEGRA124_CLK_AUDIO0_MUX 300
-#define TEGRA124_CLK_AUDIO1_MUX 301
-#define TEGRA124_CLK_AUDIO2_MUX 302
-#define TEGRA124_CLK_AUDIO3_MUX 303
-#define TEGRA124_CLK_AUDIO4_MUX 304
-#define TEGRA124_CLK_SPDIF_MUX 305
-#define TEGRA124_CLK_CLK_OUT_1_MUX 306
-#define TEGRA124_CLK_CLK_OUT_2_MUX 307
-#define TEGRA124_CLK_CLK_OUT_3_MUX 308
-#define TEGRA124_CLK_DSIA_MUX 309
-#define TEGRA124_CLK_DSIB_MUX 310
-#define TEGRA124_CLK_SOR0_LVDS 311
-#define TEGRA124_CLK_XUSB_SS_DIV2 312
-#define TEGRA124_CLK_CLK_MAX 313
+#define TEGRA124_CLK_CLK_MAX		315
 
 #endif	/* _DT_BINDINGS_CLOCK_TEGRA124_CAR_H */
diff --git a/include/dt-bindings/clock/tegra20-car.h b/include/dt-bindings/clock/tegra20-car.h
index 9406207cfac8..04500b243a4d 100644
--- a/include/dt-bindings/clock/tegra20-car.h
+++ b/include/dt-bindings/clock/tegra20-car.h
@@ -49,7 +49,7 @@
 /* 30 */
 #define TEGRA20_CLK_CACHE2 31
 
-#define TEGRA20_CLK_MEM 32
+#define TEGRA20_CLK_MC 32
 #define TEGRA20_CLK_AHBDMA 33
 #define TEGRA20_CLK_APBDMA 34
 /* 35 */
diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h
index 00953d9484cb..979d24a6799f 100644
--- a/include/dt-bindings/clock/vf610-clock.h
+++ b/include/dt-bindings/clock/vf610-clock.h
@@ -21,24 +21,24 @@
 #define VF610_CLK_FASK_CLK_SEL		8
 #define VF610_CLK_AUDIO_EXT		9
 #define VF610_CLK_ENET_EXT		10
-#define VF610_CLK_PLL1_MAIN		11
+#define VF610_CLK_PLL1_SYS		11
 #define VF610_CLK_PLL1_PFD1		12
 #define VF610_CLK_PLL1_PFD2		13
 #define VF610_CLK_PLL1_PFD3		14
 #define VF610_CLK_PLL1_PFD4		15
-#define VF610_CLK_PLL2_MAIN		16
+#define VF610_CLK_PLL2_BUS		16
 #define VF610_CLK_PLL2_PFD1		17
 #define VF610_CLK_PLL2_PFD2		18
 #define VF610_CLK_PLL2_PFD3		19
 #define VF610_CLK_PLL2_PFD4		20
-#define VF610_CLK_PLL3_MAIN		21
+#define VF610_CLK_PLL3_USB_OTG		21
 #define VF610_CLK_PLL3_PFD1		22
 #define VF610_CLK_PLL3_PFD2		23
 #define VF610_CLK_PLL3_PFD3		24
 #define VF610_CLK_PLL3_PFD4		25
-#define VF610_CLK_PLL4_MAIN		26
-#define VF610_CLK_PLL5_MAIN		27
-#define VF610_CLK_PLL6_MAIN		28
+#define VF610_CLK_PLL4_AUDIO		26
+#define VF610_CLK_PLL5_ENET		27
+#define VF610_CLK_PLL6_VIDEO		28
 #define VF610_CLK_PLL3_MAIN_DIV		29
 #define VF610_CLK_PLL4_MAIN_DIV		30
 #define VF610_CLK_PLL6_MAIN_DIV		31
@@ -166,6 +166,33 @@
 #define VF610_CLK_DMAMUX3		153
 #define VF610_CLK_FLEXCAN0_EN		154
 #define VF610_CLK_FLEXCAN1_EN		155
-#define VF610_CLK_END			156
+#define VF610_CLK_PLL7_USB_HOST		156
+#define VF610_CLK_USBPHY0		157
+#define VF610_CLK_USBPHY1		158
+#define VF610_CLK_LVDS1_IN		159
+#define VF610_CLK_ANACLK1		160
+#define VF610_CLK_PLL1_BYPASS_SRC	161
+#define VF610_CLK_PLL2_BYPASS_SRC	162
+#define VF610_CLK_PLL3_BYPASS_SRC	163
+#define VF610_CLK_PLL4_BYPASS_SRC	164
+#define VF610_CLK_PLL5_BYPASS_SRC	165
+#define VF610_CLK_PLL6_BYPASS_SRC	166
+#define VF610_CLK_PLL7_BYPASS_SRC	167
+#define VF610_CLK_PLL1			168
+#define VF610_CLK_PLL2			169
+#define VF610_CLK_PLL3			170
+#define VF610_CLK_PLL4			171
+#define VF610_CLK_PLL5			172
+#define VF610_CLK_PLL6			173
+#define VF610_CLK_PLL7			174
+#define VF610_PLL1_BYPASS		175
+#define VF610_PLL2_BYPASS		176
+#define VF610_PLL3_BYPASS		177
+#define VF610_PLL4_BYPASS		178
+#define VF610_PLL5_BYPASS		179
+#define VF610_PLL6_BYPASS		180
+#define VF610_PLL7_BYPASS		181
+#define VF610_CLK_SNVS			182
+#define VF610_CLK_END			183
 
 #endif /* __DT_BINDINGS_CLOCK_VF610_H */
diff --git a/include/dt-bindings/dma/at91.h b/include/dt-bindings/dma/at91.h
index e835037a77b4..ab6cbba45401 100644
--- a/include/dt-bindings/dma/at91.h
+++ b/include/dt-bindings/dma/at91.h
@@ -9,6 +9,8 @@
 #ifndef __DT_BINDINGS_AT91_DMA_H__
 #define __DT_BINDINGS_AT91_DMA_H__
 
+/* ---------- HDMAC ---------- */
+
 /*
  * Source and/or destination peripheral ID
  */
@@ -24,4 +26,27 @@
 #define AT91_DMA_CFG_FIFOCFG_ALAP	(0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET)	/* largest defined AHB burst */
 #define AT91_DMA_CFG_FIFOCFG_ASAP	(0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET)	/* single AHB access */
 
+
+/* ---------- XDMAC ---------- */
+#define AT91_XDMAC_DT_MEM_IF_MASK	(0x1)
+#define AT91_XDMAC_DT_MEM_IF_OFFSET	(13)
+#define AT91_XDMAC_DT_MEM_IF(mem_if)	(((mem_if) & AT91_XDMAC_DT_MEM_IF_MASK) \
+					<< AT91_XDMAC_DT_MEM_IF_OFFSET)
+#define AT91_XDMAC_DT_GET_MEM_IF(cfg)	(((cfg) >> AT91_XDMAC_DT_MEM_IF_OFFSET) \
+					& AT91_XDMAC_DT_MEM_IF_MASK)
+
+#define AT91_XDMAC_DT_PER_IF_MASK	(0x1)
+#define AT91_XDMAC_DT_PER_IF_OFFSET	(14)
+#define AT91_XDMAC_DT_PER_IF(per_if)	(((per_if) & AT91_XDMAC_DT_PER_IF_MASK) \
+					<< AT91_XDMAC_DT_PER_IF_OFFSET)
+#define AT91_XDMAC_DT_GET_PER_IF(cfg)	(((cfg) >> AT91_XDMAC_DT_PER_IF_OFFSET) \
+					& AT91_XDMAC_DT_PER_IF_MASK)
+
+#define AT91_XDMAC_DT_PERID_MASK	(0x7f)
+#define AT91_XDMAC_DT_PERID_OFFSET	(24)
+#define AT91_XDMAC_DT_PERID(perid)	(((perid) & AT91_XDMAC_DT_PERID_MASK) \
+					<< AT91_XDMAC_DT_PERID_OFFSET)
+#define AT91_XDMAC_DT_GET_PERID(cfg)	(((cfg) >> AT91_XDMAC_DT_PERID_OFFSET) \
+					& AT91_XDMAC_DT_PERID_MASK)
+
 #endif /* __DT_BINDINGS_AT91_DMA_H__ */
diff --git a/include/dt-bindings/dma/sun4i-a10.h b/include/dt-bindings/dma/sun4i-a10.h
new file mode 100644
index 000000000000..8caba9ef7e9d
--- /dev/null
+++ b/include/dt-bindings/dma/sun4i-a10.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __DT_BINDINGS_DMA_SUN4I_A10_H_
+#define __DT_BINDINGS_DMA_SUN4I_A10_H_
+
+#define SUN4I_DMA_NORMAL	0
+#define SUN4I_DMA_DEDICATED	1
+
+#endif /* __DT_BINDINGS_DMA_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/gpio/meson8-gpio.h b/include/dt-bindings/gpio/meson8-gpio.h
new file mode 100644
index 000000000000..fdaeb5cbf5e1
--- /dev/null
+++ b/include/dt-bindings/gpio/meson8-gpio.h
@@ -0,0 +1,157 @@
+/*
+ * GPIO definitions for Amlogic Meson8 SoCs
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _DT_BINDINGS_MESON8_GPIO_H
+#define _DT_BINDINGS_MESON8_GPIO_H
+
+/* First GPIO chip */
+#define GPIOX_0		0
+#define GPIOX_1		1
+#define GPIOX_2		2
+#define GPIOX_3		3
+#define GPIOX_4		4
+#define GPIOX_5		5
+#define GPIOX_6		6
+#define GPIOX_7		7
+#define GPIOX_8		8
+#define GPIOX_9		9
+#define GPIOX_10	10
+#define GPIOX_11	11
+#define GPIOX_12	12
+#define GPIOX_13	13
+#define GPIOX_14	14
+#define GPIOX_15	15
+#define GPIOX_16	16
+#define GPIOX_17	17
+#define GPIOX_18	18
+#define GPIOX_19	19
+#define GPIOX_20	20
+#define GPIOX_21	21
+#define GPIOY_0		22
+#define GPIOY_1		23
+#define GPIOY_2		24
+#define GPIOY_3		25
+#define GPIOY_4		26
+#define GPIOY_5		27
+#define GPIOY_6		28
+#define GPIOY_7		29
+#define GPIOY_8		30
+#define GPIOY_9		31
+#define GPIOY_10	32
+#define GPIOY_11	33
+#define GPIOY_12	34
+#define GPIOY_13	35
+#define GPIOY_14	36
+#define GPIOY_15	37
+#define GPIOY_16	38
+#define GPIODV_0	39
+#define GPIODV_1	40
+#define GPIODV_2	41
+#define GPIODV_3	42
+#define GPIODV_4	43
+#define GPIODV_5	44
+#define GPIODV_6	45
+#define GPIODV_7	46
+#define GPIODV_8	47
+#define GPIODV_9	48
+#define GPIODV_10	49
+#define GPIODV_11	50
+#define GPIODV_12	51
+#define GPIODV_13	52
+#define GPIODV_14	53
+#define GPIODV_15	54
+#define GPIODV_16	55
+#define GPIODV_17	56
+#define GPIODV_18	57
+#define GPIODV_19	58
+#define GPIODV_20	59
+#define GPIODV_21	60
+#define GPIODV_22	61
+#define GPIODV_23	62
+#define GPIODV_24	63
+#define GPIODV_25	64
+#define GPIODV_26	65
+#define GPIODV_27	66
+#define GPIODV_28	67
+#define GPIODV_29	68
+#define GPIOH_0		69
+#define GPIOH_1		70
+#define GPIOH_2		71
+#define GPIOH_3		72
+#define GPIOH_4		73
+#define GPIOH_5		74
+#define GPIOH_6		75
+#define GPIOH_7		76
+#define GPIOH_8		77
+#define GPIOH_9		78
+#define GPIOZ_0		79
+#define GPIOZ_1		80
+#define GPIOZ_2		81
+#define GPIOZ_3		82
+#define GPIOZ_4		83
+#define GPIOZ_5		84
+#define GPIOZ_6		85
+#define GPIOZ_7		86
+#define GPIOZ_8		87
+#define GPIOZ_9		88
+#define GPIOZ_10	89
+#define GPIOZ_11	90
+#define GPIOZ_12	91
+#define GPIOZ_13	92
+#define GPIOZ_14	93
+#define CARD_0		94
+#define CARD_1		95
+#define CARD_2		96
+#define CARD_3		97
+#define CARD_4		98
+#define CARD_5		99
+#define CARD_6		100
+#define BOOT_0		101
+#define BOOT_1		102
+#define BOOT_2		103
+#define BOOT_3		104
+#define BOOT_4		105
+#define BOOT_5		106
+#define BOOT_6		107
+#define BOOT_7		108
+#define BOOT_8		109
+#define BOOT_9		110
+#define BOOT_10		111
+#define BOOT_11		112
+#define BOOT_12		113
+#define BOOT_13		114
+#define BOOT_14		115
+#define BOOT_15		116
+#define BOOT_16		117
+#define BOOT_17		118
+#define BOOT_18		119
+
+/* Second GPIO chip */
+#define GPIOAO_0	0
+#define GPIOAO_1	1
+#define GPIOAO_2	2
+#define GPIOAO_3	3
+#define GPIOAO_4	4
+#define GPIOAO_5	5
+#define GPIOAO_6	6
+#define GPIOAO_7	7
+#define GPIOAO_8	8
+#define GPIOAO_9	9
+#define GPIOAO_10	10
+#define GPIOAO_11	11
+#define GPIOAO_12	12
+#define GPIOAO_13	13
+#define GPIO_BSD_EN	14
+#define GPIO_TEST_N	15
+
+#endif /* _DT_BINDINGS_MESON8_GPIO_H */
diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h
new file mode 100644
index 000000000000..42121fa238fa
--- /dev/null
+++ b/include/dt-bindings/iio/qcom,spmi-vadc.h
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_H
+#define _DT_BINDINGS_QCOM_SPMI_VADC_H
+
+/* Voltage ADC channels */
+#define VADC_USBIN				0x00
+#define VADC_DCIN				0x01
+#define VADC_VCHG_SNS				0x02
+#define VADC_SPARE1_03				0x03
+#define VADC_USB_ID_MV				0x04
+#define VADC_VCOIN				0x05
+#define VADC_VBAT_SNS				0x06
+#define VADC_VSYS				0x07
+#define VADC_DIE_TEMP				0x08
+#define VADC_REF_625MV				0x09
+#define VADC_REF_1250MV				0x0a
+#define VADC_CHG_TEMP				0x0b
+#define VADC_SPARE1				0x0c
+#define VADC_SPARE2				0x0d
+#define VADC_GND_REF				0x0e
+#define VADC_VDD_VADC				0x0f
+
+#define VADC_P_MUX1_1_1				0x10
+#define VADC_P_MUX2_1_1				0x11
+#define VADC_P_MUX3_1_1				0x12
+#define VADC_P_MUX4_1_1				0x13
+#define VADC_P_MUX5_1_1				0x14
+#define VADC_P_MUX6_1_1				0x15
+#define VADC_P_MUX7_1_1				0x16
+#define VADC_P_MUX8_1_1				0x17
+#define VADC_P_MUX9_1_1				0x18
+#define VADC_P_MUX10_1_1			0x19
+#define VADC_P_MUX11_1_1			0x1a
+#define VADC_P_MUX12_1_1			0x1b
+#define VADC_P_MUX13_1_1			0x1c
+#define VADC_P_MUX14_1_1			0x1d
+#define VADC_P_MUX15_1_1			0x1e
+#define VADC_P_MUX16_1_1			0x1f
+
+#define VADC_P_MUX1_1_3				0x20
+#define VADC_P_MUX2_1_3				0x21
+#define VADC_P_MUX3_1_3				0x22
+#define VADC_P_MUX4_1_3				0x23
+#define VADC_P_MUX5_1_3				0x24
+#define VADC_P_MUX6_1_3				0x25
+#define VADC_P_MUX7_1_3				0x26
+#define VADC_P_MUX8_1_3				0x27
+#define VADC_P_MUX9_1_3				0x28
+#define VADC_P_MUX10_1_3			0x29
+#define VADC_P_MUX11_1_3			0x2a
+#define VADC_P_MUX12_1_3			0x2b
+#define VADC_P_MUX13_1_3			0x2c
+#define VADC_P_MUX14_1_3			0x2d
+#define VADC_P_MUX15_1_3			0x2e
+#define VADC_P_MUX16_1_3			0x2f
+
+#define VADC_LR_MUX1_BAT_THERM			0x30
+#define VADC_LR_MUX2_BAT_ID			0x31
+#define VADC_LR_MUX3_XO_THERM			0x32
+#define VADC_LR_MUX4_AMUX_THM1			0x33
+#define VADC_LR_MUX5_AMUX_THM2			0x34
+#define VADC_LR_MUX6_AMUX_THM3			0x35
+#define VADC_LR_MUX7_HW_ID			0x36
+#define VADC_LR_MUX8_AMUX_THM4			0x37
+#define VADC_LR_MUX9_AMUX_THM5			0x38
+#define VADC_LR_MUX10_USB_ID			0x39
+#define VADC_AMUX_PU1				0x3a
+#define VADC_AMUX_PU2				0x3b
+#define VADC_LR_MUX3_BUF_XO_THERM		0x3c
+
+#define VADC_LR_MUX1_PU1_BAT_THERM		0x70
+#define VADC_LR_MUX2_PU1_BAT_ID			0x71
+#define VADC_LR_MUX3_PU1_XO_THERM		0x72
+#define VADC_LR_MUX4_PU1_AMUX_THM1		0x73
+#define VADC_LR_MUX5_PU1_AMUX_THM2		0x74
+#define VADC_LR_MUX6_PU1_AMUX_THM3		0x75
+#define VADC_LR_MUX7_PU1_AMUX_HW_ID		0x76
+#define VADC_LR_MUX8_PU1_AMUX_THM4		0x77
+#define VADC_LR_MUX9_PU1_AMUX_THM5		0x78
+#define VADC_LR_MUX10_PU1_AMUX_USB_ID		0x79
+#define VADC_LR_MUX3_BUF_PU1_XO_THERM		0x7c
+
+#define VADC_LR_MUX1_PU2_BAT_THERM		0xb0
+#define VADC_LR_MUX2_PU2_BAT_ID			0xb1
+#define VADC_LR_MUX3_PU2_XO_THERM		0xb2
+#define VADC_LR_MUX4_PU2_AMUX_THM1		0xb3
+#define VADC_LR_MUX5_PU2_AMUX_THM2		0xb4
+#define VADC_LR_MUX6_PU2_AMUX_THM3		0xb5
+#define VADC_LR_MUX7_PU2_AMUX_HW_ID		0xb6
+#define VADC_LR_MUX8_PU2_AMUX_THM4		0xb7
+#define VADC_LR_MUX9_PU2_AMUX_THM5		0xb8
+#define VADC_LR_MUX10_PU2_AMUX_USB_ID		0xb9
+#define VADC_LR_MUX3_BUF_PU2_XO_THERM		0xbc
+
+#define VADC_LR_MUX1_PU1_PU2_BAT_THERM		0xf0
+#define VADC_LR_MUX2_PU1_PU2_BAT_ID		0xf1
+#define VADC_LR_MUX3_PU1_PU2_XO_THERM		0xf2
+#define VADC_LR_MUX4_PU1_PU2_AMUX_THM1		0xf3
+#define VADC_LR_MUX5_PU1_PU2_AMUX_THM2		0xf4
+#define VADC_LR_MUX6_PU1_PU2_AMUX_THM3		0xf5
+#define VADC_LR_MUX7_PU1_PU2_AMUX_HW_ID		0xf6
+#define VADC_LR_MUX8_PU1_PU2_AMUX_THM4		0xf7
+#define VADC_LR_MUX9_PU1_PU2_AMUX_THM5		0xf8
+#define VADC_LR_MUX10_PU1_PU2_AMUX_USB_ID	0xf9
+#define VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM	0xfc
+
+#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_H */
diff --git a/include/dt-bindings/input/ti-drv260x.h b/include/dt-bindings/input/ti-drv260x.h
new file mode 100644
index 000000000000..2626e6d9f707
--- /dev/null
+++ b/include/dt-bindings/input/ti-drv260x.h
@@ -0,0 +1,36 @@
+/*
+ * DRV260X haptics driver family
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * Copyright:   (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_TI_DRV260X_H
+#define _DT_BINDINGS_TI_DRV260X_H
+
+/* Calibration Types */
+#define DRV260X_LRA_MODE		0x00
+#define DRV260X_LRA_NO_CAL_MODE	0x01
+#define DRV260X_ERM_MODE		0x02
+
+/* Library Selection */
+#define DRV260X_LIB_EMPTY			0x00
+#define DRV260X_ERM_LIB_A			0x01
+#define DRV260X_ERM_LIB_B			0x02
+#define DRV260X_ERM_LIB_C			0x03
+#define DRV260X_ERM_LIB_D			0x04
+#define DRV260X_ERM_LIB_E			0x05
+#define DRV260X_LIB_LRA			0x06
+#define DRV260X_ERM_LIB_F			0x07
+
+#endif
diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h
index 1ea1b702fec2..d4110d5caa3e 100644
--- a/include/dt-bindings/interrupt-controller/arm-gic.h
+++ b/include/dt-bindings/interrupt-controller/arm-gic.h
@@ -7,14 +7,14 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 
-/* interrupt specific cell 0 */
+/* interrupt specifier cell 0 */
 
 #define GIC_SPI 0
 #define GIC_PPI 1
 
 /*
  * Interrupt specifier cell 2.
- * The flaggs in irq.h are valid, plus those below.
+ * The flags in irq.h are valid, plus those below.
  */
 #define GIC_CPU_MASK_RAW(x) ((x) << 8)
 #define GIC_CPU_MASK_SIMPLE(num) GIC_CPU_MASK_RAW((1 << (num)) - 1)
diff --git a/include/dt-bindings/interrupt-controller/mips-gic.h b/include/dt-bindings/interrupt-controller/mips-gic.h
new file mode 100644
index 000000000000..cf35a577e371
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/mips-gic.h
@@ -0,0 +1,9 @@
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_MIPS_GIC_H
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define GIC_SHARED 0
+#define GIC_LOCAL 1
+
+#endif
diff --git a/include/dt-bindings/memory/tegra114-mc.h b/include/dt-bindings/memory/tegra114-mc.h
new file mode 100644
index 000000000000..8f48985a3139
--- /dev/null
+++ b/include/dt-bindings/memory/tegra114-mc.h
@@ -0,0 +1,25 @@
+#ifndef DT_BINDINGS_MEMORY_TEGRA114_MC_H
+#define DT_BINDINGS_MEMORY_TEGRA114_MC_H
+
+#define TEGRA_SWGROUP_PTC	0
+#define TEGRA_SWGROUP_DC	1
+#define TEGRA_SWGROUP_DCB	2
+#define TEGRA_SWGROUP_EPP	3
+#define TEGRA_SWGROUP_G2	4
+#define TEGRA_SWGROUP_AVPC	5
+#define TEGRA_SWGROUP_NV	6
+#define TEGRA_SWGROUP_HDA	7
+#define TEGRA_SWGROUP_HC	8
+#define TEGRA_SWGROUP_MSENC	9
+#define TEGRA_SWGROUP_PPCS	10
+#define TEGRA_SWGROUP_VDE	11
+#define TEGRA_SWGROUP_MPCORELP	12
+#define TEGRA_SWGROUP_MPCORE	13
+#define TEGRA_SWGROUP_VI	14
+#define TEGRA_SWGROUP_ISP	15
+#define TEGRA_SWGROUP_XUSB_HOST	16
+#define TEGRA_SWGROUP_XUSB_DEV	17
+#define TEGRA_SWGROUP_EMUCIF	18
+#define TEGRA_SWGROUP_TSEC	19
+
+#endif
diff --git a/include/dt-bindings/memory/tegra124-mc.h b/include/dt-bindings/memory/tegra124-mc.h
new file mode 100644
index 000000000000..7d8ee798f34e
--- /dev/null
+++ b/include/dt-bindings/memory/tegra124-mc.h
@@ -0,0 +1,31 @@
+#ifndef DT_BINDINGS_MEMORY_TEGRA124_MC_H
+#define DT_BINDINGS_MEMORY_TEGRA124_MC_H
+
+#define TEGRA_SWGROUP_PTC	0
+#define TEGRA_SWGROUP_DC	1
+#define TEGRA_SWGROUP_DCB	2
+#define TEGRA_SWGROUP_AFI	3
+#define TEGRA_SWGROUP_AVPC	4
+#define TEGRA_SWGROUP_HDA	5
+#define TEGRA_SWGROUP_HC	6
+#define TEGRA_SWGROUP_MSENC	7
+#define TEGRA_SWGROUP_PPCS	8
+#define TEGRA_SWGROUP_SATA	9
+#define TEGRA_SWGROUP_VDE	10
+#define TEGRA_SWGROUP_MPCORELP	11
+#define TEGRA_SWGROUP_MPCORE	12
+#define TEGRA_SWGROUP_ISP2	13
+#define TEGRA_SWGROUP_XUSB_HOST	14
+#define TEGRA_SWGROUP_XUSB_DEV	15
+#define TEGRA_SWGROUP_ISP2B	16
+#define TEGRA_SWGROUP_TSEC	17
+#define TEGRA_SWGROUP_A9AVP	18
+#define TEGRA_SWGROUP_GPU	19
+#define TEGRA_SWGROUP_SDMMC1A	20
+#define TEGRA_SWGROUP_SDMMC2A	21
+#define TEGRA_SWGROUP_SDMMC3A	22
+#define TEGRA_SWGROUP_SDMMC4A	23
+#define TEGRA_SWGROUP_VIC	24
+#define TEGRA_SWGROUP_VI	25
+
+#endif
diff --git a/include/dt-bindings/memory/tegra30-mc.h b/include/dt-bindings/memory/tegra30-mc.h
new file mode 100644
index 000000000000..502beb03d777
--- /dev/null
+++ b/include/dt-bindings/memory/tegra30-mc.h
@@ -0,0 +1,24 @@
+#ifndef DT_BINDINGS_MEMORY_TEGRA30_MC_H
+#define DT_BINDINGS_MEMORY_TEGRA30_MC_H
+
+#define TEGRA_SWGROUP_PTC	0
+#define TEGRA_SWGROUP_DC	1
+#define TEGRA_SWGROUP_DCB	2
+#define TEGRA_SWGROUP_EPP	3
+#define TEGRA_SWGROUP_G2	4
+#define TEGRA_SWGROUP_MPE	5
+#define TEGRA_SWGROUP_VI	6
+#define TEGRA_SWGROUP_AFI	7
+#define TEGRA_SWGROUP_AVPC	8
+#define TEGRA_SWGROUP_NV	9
+#define TEGRA_SWGROUP_NV2	10
+#define TEGRA_SWGROUP_HDA	11
+#define TEGRA_SWGROUP_HC	12
+#define TEGRA_SWGROUP_PPCS	13
+#define TEGRA_SWGROUP_SATA	14
+#define TEGRA_SWGROUP_VDE	15
+#define TEGRA_SWGROUP_MPCORELP	16
+#define TEGRA_SWGROUP_MPCORE	17
+#define TEGRA_SWGROUP_ISP	18
+
+#endif
diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
new file mode 100644
index 000000000000..388a6f3d6165
--- /dev/null
+++ b/include/dt-bindings/mfd/qcom-rpm.h
@@ -0,0 +1,154 @@
+/*
+ * This header provides constants for the Qualcomm RPM bindings.
+ */
+
+#ifndef _DT_BINDINGS_MFD_QCOM_RPM_H
+#define _DT_BINDINGS_MFD_QCOM_RPM_H
+
+/*
+ * Constants use to identify individual resources in the RPM.
+ */
+#define QCOM_RPM_APPS_FABRIC_ARB		1
+#define QCOM_RPM_APPS_FABRIC_CLK		2
+#define QCOM_RPM_APPS_FABRIC_HALT		3
+#define QCOM_RPM_APPS_FABRIC_IOCTL		4
+#define QCOM_RPM_APPS_FABRIC_MODE		5
+#define QCOM_RPM_APPS_L2_CACHE_CTL		6
+#define QCOM_RPM_CFPB_CLK			7
+#define QCOM_RPM_CXO_BUFFERS			8
+#define QCOM_RPM_CXO_CLK			9
+#define QCOM_RPM_DAYTONA_FABRIC_CLK		10
+#define QCOM_RPM_DDR_DMM			11
+#define QCOM_RPM_EBI1_CLK			12
+#define QCOM_RPM_HDMI_SWITCH			13
+#define QCOM_RPM_MMFPB_CLK			14
+#define QCOM_RPM_MM_FABRIC_ARB			15
+#define QCOM_RPM_MM_FABRIC_CLK			16
+#define QCOM_RPM_MM_FABRIC_HALT			17
+#define QCOM_RPM_MM_FABRIC_IOCTL		18
+#define QCOM_RPM_MM_FABRIC_MODE			19
+#define QCOM_RPM_PLL_4				20
+#define QCOM_RPM_PM8058_LDO0			21
+#define QCOM_RPM_PM8058_LDO1			22
+#define QCOM_RPM_PM8058_LDO2			23
+#define QCOM_RPM_PM8058_LDO3			24
+#define QCOM_RPM_PM8058_LDO4			25
+#define QCOM_RPM_PM8058_LDO5			26
+#define QCOM_RPM_PM8058_LDO6			27
+#define QCOM_RPM_PM8058_LDO7			28
+#define QCOM_RPM_PM8058_LDO8			29
+#define QCOM_RPM_PM8058_LDO9			30
+#define QCOM_RPM_PM8058_LDO10			31
+#define QCOM_RPM_PM8058_LDO11			32
+#define QCOM_RPM_PM8058_LDO12			33
+#define QCOM_RPM_PM8058_LDO13			34
+#define QCOM_RPM_PM8058_LDO14			35
+#define QCOM_RPM_PM8058_LDO15			36
+#define QCOM_RPM_PM8058_LDO16			37
+#define QCOM_RPM_PM8058_LDO17			38
+#define QCOM_RPM_PM8058_LDO18			39
+#define QCOM_RPM_PM8058_LDO19			40
+#define QCOM_RPM_PM8058_LDO20			41
+#define QCOM_RPM_PM8058_LDO21			42
+#define QCOM_RPM_PM8058_LDO22			43
+#define QCOM_RPM_PM8058_LDO23			44
+#define QCOM_RPM_PM8058_LDO24			45
+#define QCOM_RPM_PM8058_LDO25			46
+#define QCOM_RPM_PM8058_LVS0			47
+#define QCOM_RPM_PM8058_LVS1			48
+#define QCOM_RPM_PM8058_NCP			49
+#define QCOM_RPM_PM8058_SMPS0			50
+#define QCOM_RPM_PM8058_SMPS1			51
+#define QCOM_RPM_PM8058_SMPS2			52
+#define QCOM_RPM_PM8058_SMPS3			53
+#define QCOM_RPM_PM8058_SMPS4			54
+#define QCOM_RPM_PM8821_LDO1			55
+#define QCOM_RPM_PM8821_SMPS1			56
+#define QCOM_RPM_PM8821_SMPS2			57
+#define QCOM_RPM_PM8901_LDO0			58
+#define QCOM_RPM_PM8901_LDO1			59
+#define QCOM_RPM_PM8901_LDO2			60
+#define QCOM_RPM_PM8901_LDO3			61
+#define QCOM_RPM_PM8901_LDO4			62
+#define QCOM_RPM_PM8901_LDO5			63
+#define QCOM_RPM_PM8901_LDO6			64
+#define QCOM_RPM_PM8901_LVS0			65
+#define QCOM_RPM_PM8901_LVS1			66
+#define QCOM_RPM_PM8901_LVS2			67
+#define QCOM_RPM_PM8901_LVS3			68
+#define QCOM_RPM_PM8901_MVS			69
+#define QCOM_RPM_PM8901_SMPS0			70
+#define QCOM_RPM_PM8901_SMPS1			71
+#define QCOM_RPM_PM8901_SMPS2			72
+#define QCOM_RPM_PM8901_SMPS3			73
+#define QCOM_RPM_PM8901_SMPS4			74
+#define QCOM_RPM_PM8921_CLK1			75
+#define QCOM_RPM_PM8921_CLK2			76
+#define QCOM_RPM_PM8921_LDO1			77
+#define QCOM_RPM_PM8921_LDO2			78
+#define QCOM_RPM_PM8921_LDO3			79
+#define QCOM_RPM_PM8921_LDO4			80
+#define QCOM_RPM_PM8921_LDO5			81
+#define QCOM_RPM_PM8921_LDO6			82
+#define QCOM_RPM_PM8921_LDO7			83
+#define QCOM_RPM_PM8921_LDO8			84
+#define QCOM_RPM_PM8921_LDO9			85
+#define QCOM_RPM_PM8921_LDO10			86
+#define QCOM_RPM_PM8921_LDO11			87
+#define QCOM_RPM_PM8921_LDO12			88
+#define QCOM_RPM_PM8921_LDO13			89
+#define QCOM_RPM_PM8921_LDO14			90
+#define QCOM_RPM_PM8921_LDO15			91
+#define QCOM_RPM_PM8921_LDO16			92
+#define QCOM_RPM_PM8921_LDO17			93
+#define QCOM_RPM_PM8921_LDO18			94
+#define QCOM_RPM_PM8921_LDO19			95
+#define QCOM_RPM_PM8921_LDO20			96
+#define QCOM_RPM_PM8921_LDO21			97
+#define QCOM_RPM_PM8921_LDO22			98
+#define QCOM_RPM_PM8921_LDO23			99
+#define QCOM_RPM_PM8921_LDO24			100
+#define QCOM_RPM_PM8921_LDO25			101
+#define QCOM_RPM_PM8921_LDO26			102
+#define QCOM_RPM_PM8921_LDO27			103
+#define QCOM_RPM_PM8921_LDO28			104
+#define QCOM_RPM_PM8921_LDO29			105
+#define QCOM_RPM_PM8921_LVS1			106
+#define QCOM_RPM_PM8921_LVS2			107
+#define QCOM_RPM_PM8921_LVS3			108
+#define QCOM_RPM_PM8921_LVS4			109
+#define QCOM_RPM_PM8921_LVS5			110
+#define QCOM_RPM_PM8921_LVS6			111
+#define QCOM_RPM_PM8921_LVS7			112
+#define QCOM_RPM_PM8921_MVS			113
+#define QCOM_RPM_PM8921_NCP			114
+#define QCOM_RPM_PM8921_SMPS1			115
+#define QCOM_RPM_PM8921_SMPS2			116
+#define QCOM_RPM_PM8921_SMPS3			117
+#define QCOM_RPM_PM8921_SMPS4			118
+#define QCOM_RPM_PM8921_SMPS5			119
+#define QCOM_RPM_PM8921_SMPS6			120
+#define QCOM_RPM_PM8921_SMPS7			121
+#define QCOM_RPM_PM8921_SMPS8			122
+#define QCOM_RPM_PXO_CLK			123
+#define QCOM_RPM_QDSS_CLK			124
+#define QCOM_RPM_SFPB_CLK			125
+#define QCOM_RPM_SMI_CLK			126
+#define QCOM_RPM_SYS_FABRIC_ARB			127
+#define QCOM_RPM_SYS_FABRIC_CLK			128
+#define QCOM_RPM_SYS_FABRIC_HALT		129
+#define QCOM_RPM_SYS_FABRIC_IOCTL		130
+#define QCOM_RPM_SYS_FABRIC_MODE		131
+#define QCOM_RPM_USB_OTG_SWITCH			132
+#define QCOM_RPM_VDDMIN_GPIO			133
+
+/*
+ * Constants used to select force mode for regulators.
+ */
+#define QCOM_RPM_FORCE_MODE_NONE		0
+#define QCOM_RPM_FORCE_MODE_LPM			1
+#define QCOM_RPM_FORCE_MODE_HPM			2
+#define QCOM_RPM_FORCE_MODE_AUTO		3
+#define QCOM_RPM_FORCE_MODE_BYPASS		4
+
+#endif
diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h
new file mode 100644
index 000000000000..6c901930eb3e
--- /dev/null
+++ b/include/dt-bindings/phy/phy.h
@@ -0,0 +1,19 @@
+/*
+ *
+ * This header provides constants for the phy framework
+ *
+ * Copyright (C) 2014 STMicroelectronics
+ * Author: Gabriel Fernandez <gabriel.fernandez@st.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#ifndef _DT_BINDINGS_PHY
+#define _DT_BINDINGS_PHY
+
+#define PHY_NONE		0
+#define PHY_TYPE_SATA		1
+#define PHY_TYPE_PCIE		2
+#define PHY_TYPE_USB2		3
+#define PHY_TYPE_USB3		4
+
+#endif /* _DT_BINDINGS_PHY */
diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h
index 0fee6ff77ffc..bbca3d038900 100644
--- a/include/dt-bindings/pinctrl/at91.h
+++ b/include/dt-bindings/pinctrl/at91.h
@@ -20,6 +20,11 @@
 
 #define AT91_PINCTRL_PULL_UP_DEGLITCH	(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH)
 
+#define AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT		(0x0 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_LOW			(0x1 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_MED			(0x2 << 5)
+#define AT91_PINCTRL_DRIVE_STRENGTH_HI			(0x3 << 5)
+
 #define AT91_PIOA	0
 #define AT91_PIOB	1
 #define AT91_PIOC	2
diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h
index 3d33794e4f3e..7448edff4723 100644
--- a/include/dt-bindings/pinctrl/dra.h
+++ b/include/dt-bindings/pinctrl/dra.h
@@ -40,8 +40,8 @@
 
 /* Active pin states */
 #define PIN_OUTPUT		(0 | PULL_DIS)
-#define PIN_OUTPUT_PULLUP	(PIN_OUTPUT | PULL_ENA | PULL_UP)
-#define PIN_OUTPUT_PULLDOWN	(PIN_OUTPUT | PULL_ENA)
+#define PIN_OUTPUT_PULLUP	(PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(0)
 #define PIN_INPUT		(INPUT_EN | PULL_DIS)
 #define PIN_INPUT_SLEW		(INPUT_EN | SLEWCONTROL)
 #define PIN_INPUT_PULLUP	(PULL_ENA | INPUT_EN | PULL_UP)
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index 1c75b8ca5228..13949259705a 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -61,6 +61,7 @@
 #define OMAP3430_CORE2_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x25d8) (val)
 #define OMAP3630_CORE2_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x25a0) (val)
 #define OMAP3_WKUP_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
+#define DM816X_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
 #define AM33XX_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
 #define AM4372_IOPAD(pa, val)		OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
 #define DRA7XX_CORE_IOPAD(pa, val)	OMAP_IOPAD_OFFSET((pa), 0x3400) (val)
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
new file mode 100644
index 000000000000..fa74d7cc960c
--- /dev/null
+++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
@@ -0,0 +1,142 @@
+/*
+ * This header provides constants for the Qualcomm PMIC GPIO binding.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_QCOM_PMIC_GPIO_H
+#define _DT_BINDINGS_PINCTRL_QCOM_PMIC_GPIO_H
+
+#define PMIC_GPIO_PULL_UP_30		0
+#define PMIC_GPIO_PULL_UP_1P5		1
+#define PMIC_GPIO_PULL_UP_31P5		2
+#define PMIC_GPIO_PULL_UP_1P5_30	3
+
+#define PMIC_GPIO_STRENGTH_NO		0
+#define PMIC_GPIO_STRENGTH_HIGH		1
+#define PMIC_GPIO_STRENGTH_MED		2
+#define PMIC_GPIO_STRENGTH_LOW		3
+
+/*
+ * Note: PM8018 GPIO3 and GPIO4 are supporting
+ * only S3 and L2 options (1.8V)
+ */
+#define PM8018_GPIO_L6			0
+#define PM8018_GPIO_L5			1
+#define PM8018_GPIO_S3			2
+#define PM8018_GPIO_L14			3
+#define PM8018_GPIO_L2			4
+#define PM8018_GPIO_L4			5
+#define PM8018_GPIO_VDD			6
+
+/*
+ * Note: PM8038 GPIO7 and GPIO8 are supporting
+ * only L11 and L4 options (1.8V)
+ */
+#define PM8038_GPIO_VPH			0
+#define PM8038_GPIO_BB			1
+#define PM8038_GPIO_L11			2
+#define PM8038_GPIO_L15			3
+#define PM8038_GPIO_L4			4
+#define PM8038_GPIO_L3			5
+#define PM8038_GPIO_L17			6
+
+#define PM8058_GPIO_VPH			0
+#define PM8058_GPIO_BB			1
+#define PM8058_GPIO_S3			2
+#define PM8058_GPIO_L3			3
+#define PM8058_GPIO_L7			4
+#define PM8058_GPIO_L6			5
+#define PM8058_GPIO_L5			6
+#define PM8058_GPIO_L2			7
+
+#define PM8917_GPIO_VPH			0
+#define PM8917_GPIO_S4			2
+#define PM8917_GPIO_L15			3
+#define PM8917_GPIO_L4			4
+#define PM8917_GPIO_L3			5
+#define PM8917_GPIO_L17			6
+
+#define PM8921_GPIO_VPH			0
+#define PM8921_GPIO_BB			1
+#define PM8921_GPIO_S4			2
+#define PM8921_GPIO_L15			3
+#define PM8921_GPIO_L4			4
+#define PM8921_GPIO_L3			5
+#define PM8921_GPIO_L17			6
+
+/*
+ * Note: PM8941 gpios from 15 to 18 are supporting
+ * only S3 and L6 options (1.8V)
+ */
+#define PM8941_GPIO_VPH			0
+#define PM8941_GPIO_L1			1
+#define PM8941_GPIO_S3			2
+#define PM8941_GPIO_L6			3
+
+/*
+ * Note: PMA8084 gpios from 15 to 18 are supporting
+ * only S4 and L6 options (1.8V)
+ */
+#define PMA8084_GPIO_VPH		0
+#define PMA8084_GPIO_L1			1
+#define PMA8084_GPIO_S4			2
+#define PMA8084_GPIO_L6			3
+
+/* To be used with "function" */
+#define PMIC_GPIO_FUNC_NORMAL		"normal"
+#define PMIC_GPIO_FUNC_PAIRED		"paired"
+#define PMIC_GPIO_FUNC_FUNC1		"func1"
+#define PMIC_GPIO_FUNC_FUNC2		"func2"
+#define PMIC_GPIO_FUNC_DTEST1		"dtest1"
+#define PMIC_GPIO_FUNC_DTEST2		"dtest2"
+#define PMIC_GPIO_FUNC_DTEST3		"dtest3"
+#define PMIC_GPIO_FUNC_DTEST4		"dtest4"
+
+#define PM8038_GPIO1_2_LPG_DRV		PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO3_5V_BOOST_EN	PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO4_SSBI_ALT_CLK	PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO5_6_EXT_REG_EN	PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO10_11_EXT_REG_EN	PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO6_7_CLK		PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO9_BAT_ALRM_OUT	PMIC_GPIO_FUNC_FUNC1
+#define PM8038_GPIO6_12_KYPD_DRV	PMIC_GPIO_FUNC_FUNC2
+
+#define PM8058_GPIO7_8_MP3_CLK		PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO7_8_BCLK_19P2MHZ	PMIC_GPIO_FUNC_FUNC2
+#define PM8058_GPIO9_26_KYPD_DRV	PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO21_23_UART_TX	PMIC_GPIO_FUNC_FUNC2
+#define PM8058_GPIO24_26_LPG_DRV	PMIC_GPIO_FUNC_FUNC2
+#define PM8058_GPIO33_BCLK_19P2MHZ	PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO34_35_MP3_CLK	PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO36_BCLK_19P2MHZ	PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO37_UPL_OUT		PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO37_UART_M_RX		PMIC_GPIO_FUNC_FUNC2
+#define PM8058_GPIO38_XO_SLEEP_CLK	PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO38_39_CLK_32KHZ	PMIC_GPIO_FUNC_FUNC2
+#define PM8058_GPIO39_MP3_CLK		PMIC_GPIO_FUNC_FUNC1
+#define PM8058_GPIO40_EXT_BB_EN		PMIC_GPIO_FUNC_FUNC1
+
+#define PM8917_GPIO9_18_KEYP_DRV	PMIC_GPIO_FUNC_FUNC1
+#define PM8917_GPIO20_BAT_ALRM_OUT	PMIC_GPIO_FUNC_FUNC1
+#define PM8917_GPIO21_23_UART_TX	PMIC_GPIO_FUNC_FUNC2
+#define PM8917_GPIO25_26_EXT_REG_EN	PMIC_GPIO_FUNC_FUNC1
+#define PM8917_GPIO37_38_XO_SLEEP_CLK	PMIC_GPIO_FUNC_FUNC1
+#define PM8917_GPIO37_38_MP3_CLK	PMIC_GPIO_FUNC_FUNC2
+
+#define PM8941_GPIO9_14_KYPD_DRV	PMIC_GPIO_FUNC_FUNC1
+#define PM8941_GPIO15_18_DIV_CLK	PMIC_GPIO_FUNC_FUNC1
+#define PM8941_GPIO15_18_SLEEP_CLK	PMIC_GPIO_FUNC_FUNC2
+#define PM8941_GPIO23_26_KYPD_DRV	PMIC_GPIO_FUNC_FUNC1
+#define PM8941_GPIO23_26_LPG_DRV_HI	PMIC_GPIO_FUNC_FUNC2
+#define PM8941_GPIO31_BAT_ALRM_OUT	PMIC_GPIO_FUNC_FUNC1
+#define PM8941_GPIO33_36_LPG_DRV_3D	PMIC_GPIO_FUNC_FUNC1
+#define PM8941_GPIO33_36_LPG_DRV_HI	PMIC_GPIO_FUNC_FUNC2
+
+#define PMA8084_GPIO4_5_LPG_DRV		PMIC_GPIO_FUNC_FUNC1
+#define PMA8084_GPIO7_10_LPG_DRV	PMIC_GPIO_FUNC_FUNC1
+#define PMA8084_GPIO5_14_KEYP_DRV	PMIC_GPIO_FUNC_FUNC2
+#define PMA8084_GPIO19_21_KEYP_DRV	PMIC_GPIO_FUNC_FUNC2
+#define PMA8084_GPIO15_18_DIV_CLK	PMIC_GPIO_FUNC_FUNC1
+#define PMA8084_GPIO15_18_SLEEP_CLK	PMIC_GPIO_FUNC_FUNC2
+#define PMA8084_GPIO22_BAT_ALRM_OUT	PMIC_GPIO_FUNC_FUNC1
+
+#endif
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
new file mode 100644
index 000000000000..d2c7dabe3223
--- /dev/null
+++ b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
@@ -0,0 +1,44 @@
+/*
+ * This header provides constants for the Qualcomm PMIC's
+ * Multi-Purpose Pin binding.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_QCOM_PMIC_MPP_H
+#define _DT_BINDINGS_PINCTRL_QCOM_PMIC_MPP_H
+
+/* power-source */
+#define PM8841_MPP_VPH			0
+#define PM8841_MPP_S3			2
+
+#define PM8941_MPP_VPH			0
+#define PM8941_MPP_L1			1
+#define PM8941_MPP_S3			2
+#define PM8941_MPP_L6			3
+
+#define PMA8084_MPP_VPH			0
+#define PMA8084_MPP_L1			1
+#define PMA8084_MPP_S4			2
+#define PMA8084_MPP_L6			3
+
+/*
+ * Analog Input - Set the source for analog input.
+ * To be used with "qcom,amux-route" property
+ */
+#define PMIC_MPP_AMUX_ROUTE_CH5		0
+#define PMIC_MPP_AMUX_ROUTE_CH6		1
+#define PMIC_MPP_AMUX_ROUTE_CH7		2
+#define PMIC_MPP_AMUX_ROUTE_CH8		3
+#define PMIC_MPP_AMUX_ROUTE_ABUS1	4
+#define PMIC_MPP_AMUX_ROUTE_ABUS2	5
+#define PMIC_MPP_AMUX_ROUTE_ABUS3	6
+#define PMIC_MPP_AMUX_ROUTE_ABUS4	7
+
+/* To be used with "function" */
+#define PMIC_MPP_FUNC_NORMAL		"normal"
+#define PMIC_MPP_FUNC_PAIRED		"paired"
+#define PMIC_MPP_FUNC_DTEST1		"dtest1"
+#define PMIC_MPP_FUNC_DTEST2		"dtest2"
+#define PMIC_MPP_FUNC_DTEST3		"dtest3"
+#define PMIC_MPP_FUNC_DTEST4		"dtest4"
+
+#endif
diff --git a/include/dt-bindings/pinctrl/rockchip.h b/include/dt-bindings/pinctrl/rockchip.h
index cd5788be82ce..743e66a95e13 100644
--- a/include/dt-bindings/pinctrl/rockchip.h
+++ b/include/dt-bindings/pinctrl/rockchip.h
@@ -28,5 +28,7 @@
 #define RK_FUNC_GPIO	0
 #define RK_FUNC_1	1
 #define RK_FUNC_2	2
+#define RK_FUNC_3	3
+#define RK_FUNC_4	4
 
 #endif
diff --git a/include/dt-bindings/pinctrl/sun4i-a10.h b/include/dt-bindings/pinctrl/sun4i-a10.h
new file mode 100644
index 000000000000..f7553c143b40
--- /dev/null
+++ b/include/dt-bindings/pinctrl/sun4i-a10.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef __DT_BINDINGS_PINCTRL_SUN4I_A10_H_
+#define __DT_BINDINGS_PINCTRL_SUN4I_A10_H_
+
+#define SUN4I_PINCTRL_10_MA	0
+#define SUN4I_PINCTRL_20_MA	1
+#define SUN4I_PINCTRL_30_MA	2
+#define SUN4I_PINCTRL_40_MA	3
+
+#define SUN4I_PINCTRL_NO_PULL	0
+#define SUN4I_PINCTRL_PULL_UP	1
+#define SUN4I_PINCTRL_PULL_DOWN	2
+
+#endif /* __DT_BINDINGS_PINCTRL_SUN4I_A10_H_ */
diff --git a/include/dt-bindings/regulator/maxim,max77802.h b/include/dt-bindings/regulator/maxim,max77802.h
new file mode 100644
index 000000000000..cf28631d7109
--- /dev/null
+++ b/include/dt-bindings/regulator/maxim,max77802.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for the Maxim 77802 PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H
+#define _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H
+
+/* Regulator operating modes */
+#define MAX77802_OPMODE_LP	1
+#define MAX77802_OPMODE_NORMAL	3
+
+#endif /* _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H */
diff --git a/include/dt-bindings/reset-controller/stih407-resets.h b/include/dt-bindings/reset-controller/stih407-resets.h
new file mode 100644
index 000000000000..02d4328fe479
--- /dev/null
+++ b/include/dt-bindings/reset-controller/stih407-resets.h
@@ -0,0 +1,61 @@
+/*
+ * This header provides constants for the reset controller
+ * based peripheral powerdown requests on the STMicroelectronics
+ * STiH407 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH407
+#define _DT_BINDINGS_RESET_CONTROLLER_STIH407
+
+/* Powerdown requests control 0 */
+#define STIH407_EMISS_POWERDOWN		0
+#define STIH407_NAND_POWERDOWN		1
+
+/* Synp GMAC PowerDown */
+#define STIH407_ETH1_POWERDOWN		2
+
+/* Powerdown requests control 1 */
+#define STIH407_USB3_POWERDOWN		3
+#define STIH407_USB2_PORT1_POWERDOWN	4
+#define STIH407_USB2_PORT0_POWERDOWN	5
+#define STIH407_PCIE1_POWERDOWN		6
+#define STIH407_PCIE0_POWERDOWN		7
+#define STIH407_SATA1_POWERDOWN		8
+#define STIH407_SATA0_POWERDOWN		9
+
+/* Reset defines */
+#define STIH407_ETH1_SOFTRESET		0
+#define STIH407_MMC1_SOFTRESET		1
+#define STIH407_PICOPHY_SOFTRESET	2
+#define STIH407_IRB_SOFTRESET		3
+#define STIH407_PCIE0_SOFTRESET		4
+#define STIH407_PCIE1_SOFTRESET		5
+#define STIH407_SATA0_SOFTRESET		6
+#define STIH407_SATA1_SOFTRESET		7
+#define STIH407_MIPHY0_SOFTRESET	8
+#define STIH407_MIPHY1_SOFTRESET	9
+#define STIH407_MIPHY2_SOFTRESET	10
+#define STIH407_SATA0_PWR_SOFTRESET	11
+#define STIH407_SATA1_PWR_SOFTRESET	12
+#define STIH407_DELTA_SOFTRESET		13
+#define STIH407_BLITTER_SOFTRESET	14
+#define STIH407_HDTVOUT_SOFTRESET	15
+#define STIH407_HDQVDP_SOFTRESET	16
+#define STIH407_VDP_AUX_SOFTRESET	17
+#define STIH407_COMPO_SOFTRESET		18
+#define STIH407_HDMI_TX_PHY_SOFTRESET	19
+#define STIH407_JPEG_DEC_SOFTRESET	20
+#define STIH407_VP8_DEC_SOFTRESET	21
+#define STIH407_GPU_SOFTRESET		22
+#define STIH407_HVA_SOFTRESET		23
+#define STIH407_ERAM_HVA_SOFTRESET	24
+#define STIH407_LPM_SOFTRESET		25
+#define STIH407_KEYSCAN_SOFTRESET	26
+#define STIH407_USB2_PORT0_SOFTRESET	27
+#define STIH407_USB2_PORT1_SOFTRESET	28
+
+/* Picophy reset defines */
+#define STIH407_PICOPHY0_RESET		0
+#define STIH407_PICOPHY1_RESET		1
+#define STIH407_PICOPHY2_RESET		2
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH407 */
diff --git a/include/dt-bindings/sound/cs35l32.h b/include/dt-bindings/sound/cs35l32.h
new file mode 100644
index 000000000000..0c6d6a3c15a2
--- /dev/null
+++ b/include/dt-bindings/sound/cs35l32.h
@@ -0,0 +1,26 @@
+#ifndef __DT_CS35L32_H
+#define __DT_CS35L32_H
+
+#define CS35L32_BOOST_MGR_AUTO		0
+#define CS35L32_BOOST_MGR_AUTO_AUDIO	1
+#define CS35L32_BOOST_MGR_BYPASS	2
+#define CS35L32_BOOST_MGR_FIXED		3
+
+#define CS35L32_DATA_CFG_LR_VP		0
+#define CS35L32_DATA_CFG_LR_STAT	1
+#define CS35L32_DATA_CFG_LR		2
+#define CS35L32_DATA_CFG_LR_VPSTAT	3
+
+#define CS35L32_BATT_THRESH_3_1V	0
+#define CS35L32_BATT_THRESH_3_2V	1
+#define CS35L32_BATT_THRESH_3_3V	2
+#define CS35L32_BATT_THRESH_3_4V	3
+
+#define CS35L32_BATT_RECOV_3_1V		0
+#define CS35L32_BATT_RECOV_3_2V		1
+#define CS35L32_BATT_RECOV_3_3V		2
+#define CS35L32_BATT_RECOV_3_4V		3
+#define CS35L32_BATT_RECOV_3_5V		4
+#define CS35L32_BATT_RECOV_3_6V		5
+
+#endif /* __DT_CS35L32_H */
diff --git a/include/dt-bindings/sound/samsung-i2s.h b/include/dt-bindings/sound/samsung-i2s.h
new file mode 100644
index 000000000000..0c69818d530c
--- /dev/null
+++ b/include/dt-bindings/sound/samsung-i2s.h
@@ -0,0 +1,8 @@
+#ifndef _DT_BINDINGS_SAMSUNG_I2S_H
+#define _DT_BINDINGS_SAMSUNG_I2S_H
+
+#define CLK_I2S_CDCLK		0
+#define CLK_I2S_RCLK_SRC	1
+#define CLK_I2S_RCLK_PSR	2
+
+#endif /* _DT_BINDINGS_SAMSUNG_I2S_H */
diff --git a/include/dt-bindings/thermal/tegra124-soctherm.h b/include/dt-bindings/thermal/tegra124-soctherm.h
new file mode 100644
index 000000000000..85aaf66690f9
--- /dev/null
+++ b/include/dt-bindings/thermal/tegra124-soctherm.h
@@ -0,0 +1,13 @@
+/*
+ * This header provides constants for binding nvidia,tegra124-soctherm.
+ */
+
+#ifndef _DT_BINDINGS_THERMAL_TEGRA124_SOCTHERM_H
+#define _DT_BINDINGS_THERMAL_TEGRA124_SOCTHERM_H
+
+#define TEGRA124_SOCTHERM_SENSOR_CPU 0
+#define TEGRA124_SOCTHERM_SENSOR_MEM 1
+#define TEGRA124_SOCTHERM_SENSOR_GPU 2
+#define TEGRA124_SOCTHERM_SENSOR_PLLX 3
+
+#endif
diff --git a/include/dt-bindings/thermal/thermal.h b/include/dt-bindings/thermal/thermal.h
index 59822a995858..b5e6b0069ac7 100644
--- a/include/dt-bindings/thermal/thermal.h
+++ b/include/dt-bindings/thermal/thermal.h
@@ -11,7 +11,7 @@
 #define _DT_BINDINGS_THERMAL_THERMAL_H
 
 /* On cooling devices upper and lower limits */
-#define THERMAL_NO_LIMIT		(-1UL)
+#define THERMAL_NO_LIMIT		(~0)
 
 #endif
 
diff --git a/include/dt-bindings/thermal/thermal_exynos.h b/include/dt-bindings/thermal/thermal_exynos.h
new file mode 100644
index 000000000000..0646500bca69
--- /dev/null
+++ b/include/dt-bindings/thermal/thermal_exynos.h
@@ -0,0 +1,28 @@
+/*
+ * thermal_exynos.h - Samsung EXYNOS TMU device tree definitions
+ *
+ *  Copyright (C) 2014 Samsung Electronics
+ *  Lukasz Majewski <l.majewski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _EXYNOS_THERMAL_TMU_DT_H
+#define _EXYNOS_THERMAL_TMU_DT_H
+
+#define TYPE_ONE_POINT_TRIMMING 0
+#define TYPE_ONE_POINT_TRIMMING_25 1
+#define TYPE_ONE_POINT_TRIMMING_85 2
+#define TYPE_TWO_POINT_TRIMMING 3
+#define TYPE_NONE 4
+
+#endif /* _EXYNOS_THERMAL_TMU_DT_H */
diff --git a/src/arm/aks-cdu.dts b/src/arm/aks-cdu.dts
new file mode 100644
index 000000000000..d9c50fbb49d2
--- /dev/null
+++ b/src/arm/aks-cdu.dts
@@ -0,0 +1,119 @@
+/*
+ * aks-cdu.dts - Device Tree file for AK signal CDU
+ *
+ * Copyright (C) 2012 AK signal Brno a.s.
+ *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+#include "ge863-pro3.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+	};
+
+	ahb {
+		apb {
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+				};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+				linux,rs485-enabled-at-boot-time;
+				rs485-rts-delay = <0 0>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			uboot@40000 {
+				label = "uboot";
+				reg = <0x40000 0x80000>;
+			};
+			ubootenv@c0000 {
+				label = "ubootenv";
+				reg = <0xc0000 0x40000>;
+			};
+			kernel@100000 {
+				label = "kernel";
+				reg = <0x100000 0x400000>;
+			};
+			rootfs@500000 {
+				label = "rootfs";
+				reg = <0x500000 0x7b00000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		red {
+			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+		};
+
+		green {
+			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "on";
+		};
+
+		yellow {
+			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		blue {
+			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+};
diff --git a/src/arm/alphascale-asm9260-devkit.dts b/src/arm/alphascale-asm9260-devkit.dts
new file mode 100644
index 000000000000..c77e2c902fb6
--- /dev/null
+++ b/src/arm/alphascale-asm9260-devkit.dts
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "alphascale-asm9260.dtsi"
+
+/ {
+	model = "Alphascale asm9260 Development Kit";
+	compatible = "alphascale,asm9260devkit", "alphascale,asm9260";
+};
diff --git a/src/arm/alphascale-asm9260.dtsi b/src/arm/alphascale-asm9260.dtsi
new file mode 100644
index 000000000000..907fc7bfc418
--- /dev/null
+++ b/src/arm/alphascale-asm9260.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2014 Oleksij Rempel <linux@rempel-privat.de>
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+/ {
+	interrupt-parent = <&icoll>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x2000000>;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			clocks = <&acc CLKID_SYS_CPU>;
+		};
+	};
+
+	osc24m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-accuracy = <30000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		acc: clock-controller@80040000 {
+			compatible = "alphascale,asm9260-clock-controller";
+			#clock-cells = <1>;
+			clocks = <&osc24m>;
+			reg = <0x80040000 0x204>;
+		};
+
+		icoll: interrupt-controller@80054000 {
+			compatible = "alphascale,asm9260-icoll";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x80054000 0x200>;
+		};
+
+		timer0: timer@80088000 {
+			compatible = "alphascale,asm9260-timer";
+			reg = <0x80088000 0x4000>;
+			clocks = <&acc CLKID_AHB_TIMER0>;
+			interrupts = <29>;
+		};
+	};
+};
diff --git a/src/arm/am335x-base0033.dts b/src/arm/am335x-base0033.dts
new file mode 100644
index 000000000000..72a9b3fc4251
--- /dev/null
+++ b/src/arm/am335x-base0033.dts
@@ -0,0 +1,95 @@
+/*
+ * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "am335x-igep0033.dtsi"
+
+/ {
+	model = "IGEP COM AM335x on AQUILA Expansion";
+	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_pins>;
+		pinctrl-1 = <&nxp_hdmi_off_pins>;
+		status = "okay";
+	};
+
+	leds_base {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_base_pins>;
+
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "base:red:user";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "base:green:user";
+			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
+			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
+			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
+			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
+			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
+		>;
+	};
+	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+		>;
+	};
+
+	leds_base_pins: pinmux_leds_base_pins {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&i2c0 {
+	eeprom: eeprom@50 {
+		compatible = "at,24c256";
+		reg = <0x50>;
+	};
+};
diff --git a/src/arm/am335x-bone-common.dtsi b/src/arm/am335x-bone-common.dtsi
new file mode 100644
index 000000000000..6cc25ed912ee
--- /dev/null
+++ b/src/arm/am335x-bone-common.dtsi
@@ -0,0 +1,302 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
+			regulator-always-on;
+		};
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "mii";
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+};
diff --git a/src/arm/am335x-bone.dts b/src/arm/am335x-bone.dts
new file mode 100644
index 000000000000..83d40f7655e5
--- /dev/null
+++ b/src/arm/am335x-bone.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone";
+	compatible = "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&ldo3_reg>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
diff --git a/src/arm/am335x-boneblack.dts b/src/arm/am335x-boneblack.dts
new file mode 100644
index 000000000000..5c42d259fa68
--- /dev/null
+++ b/src/arm/am335x-boneblack.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone Black";
+	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+		pinctrl-single,pins = <
+			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+			0xa0 0x08       /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xa4 0x08       /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xa8 0x08       /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xac 0x08       /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb0 0x08       /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb4 0x08       /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xb8 0x08       /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xbc 0x08       /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc0 0x08       /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc4 0x08       /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xc8 0x08       /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xcc 0x08       /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd0 0x08       /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd4 0x08       /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xd8 0x08       /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xdc 0x08       /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
+			0xe0 0x00       /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xe4 0x00       /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xe8 0x00       /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+			0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+		>;
+	};
+	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+		pinctrl-single,pins = <
+			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+/ {
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+		status = "okay";
+	};
+};
+
+&rtc {
+	system-power-controller;
+};
diff --git a/src/arm/am335x-evm.dts b/src/arm/am335x-evm.dts
new file mode 100644
index 000000000000..66342515df20
--- /dev/null
+++ b/src/arm/am335x-evm.dts
@@ -0,0 +1,680 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "TI AM335x EVM";
+	compatible = "ti,am335x-evm", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH		/* Bank1, pin25 */
+			     &gpio1 26 GPIO_ACTIVE_HIGH		/* Bank1, pin26 */
+			     &gpio1 27 GPIO_ACTIVE_HIGH>;	/* Bank1, pin27 */
+
+		col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH		/* Bank1, pin21 */
+			     &gpio1 22 GPIO_ACTIVE_HIGH>;	/* Bank1, pin22 */
+
+		linux,keymap = <0x0000008b	/* MENU */
+				0x0100009e	/* BACK */
+				0x02000069	/* LEFT */
+				0x0001006a	/* RIGHT */
+				0x0101001c	/* ENTER */
+				0x0201006c>;	/* DOWN */
+	};
+
+	gpio_keys: volume_keys@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		switch@9 {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+		};
+
+		switch@10 {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 0>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins_s0>;
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+		display-timings {
+			800x480p62 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <39>;
+				hback-porch = <39>;
+				hsync-len = <47>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM335x-EVM";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <12000000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"LINE1L",               "Line In",
+			"LINE1R",               "Line In";
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
+
+	matrix_keypad_s0: matrix_keypad_s0 {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+
+	volume_keys_s0: volume_keys_s0 {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
+			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
+			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
+			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
+			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
+			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
+			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
+			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
+			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
+			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
+			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
+			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
+			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
+		>;
+	};
+
+	am335x_evm_audio_pins: am335x_evm_audio_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tsl2550: tsl2550@39 {
+		compatible = "taos,tsl2550";
+		reg = <0x39>;
+	};
+
+	tmp275: tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&vaux2_reg>;
+		DVDD-supply = <&vbat>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: ecap@48300100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
+	nand@0,0 {
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000C0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001C0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001E0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00A00000 0x0F600000>;
+		};
+	};
+};
+
+#include "tps65910.dtsi"
+
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&am335x_evm_audio_pins>;
+
+		status = "okay";
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 4 serializers */
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 2
+		>;
+		tx-num-evt = <32>;
+		rx-num-evt = <32>;
+};
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii-txid";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii-txid";
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+		ti,charge-delay = <0x400>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&dcan1 {
+	status = "disabled";	/* Enable only if Profile 1 is selected */
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins_default>;
+};
diff --git a/src/arm/am335x-evmsk.dts b/src/arm/am335x-evmsk.dts
new file mode 100644
index 000000000000..df5fee6b6b4b
--- /dev/null
+++ b/src/arm/am335x-evmsk.dts
@@ -0,0 +1,680 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * AM335x Starter Kit
+ * http://www.ti.com/tool/tmdssk3358
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "TI AM335x EVM-SK";
+	compatible = "ti,am335x-evmsk", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	wl12xx_vmmc: fixedregulator@2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 29 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "evmsk:green:usr0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "evmsk:green:usr1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "evmsk:green:mmc0";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "evmsk:green:heartbeat";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio_buttons: gpio_buttons@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@1 {
+			label = "button0";
+			linux,code = <0x100>;
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		switch@2 {
+			label = "button1";
+			linux,code = <0x101>;
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		switch@3 {
+			label = "button2";
+			linux,code = <0x102>;
+			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+			gpio-key,wakeup;
+		};
+
+		switch@4 {
+			label = "button3";
+			linux,code = <0x103>;
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 58 61 66 75 90 125 170 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM335x-EVMSK";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <24000000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT";
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+		status = "okay";
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+		display-timings {
+			480x272 {
+				hactive         = <480>;
+				vactive         = <272>;
+				hback-porch     = <43>;
+				hfront-porch    = <8>;
+				hsync-len       = <4>;
+				vback-porch     = <12>;
+				vfront-porch    = <4>;
+				vsync-len       = <10>;
+				clock-frequency = <9000000>;
+				hsync-active    = <0>;
+				vsync-active    = <0>;
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
+
+	lcd_pins_default: lcd_pins_default {
+		pinctrl-single,pins = <
+			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
+			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
+			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
+			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
+			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
+			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
+			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
+			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
+			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
+			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+		>;
+	};
+
+	lcd_pins_sleep: lcd_pins_sleep {
+		pinctrl-single,pins = <
+			0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
+			0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
+			0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
+			0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
+			0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
+			0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
+			0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
+			0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
+			0xa0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
+			0xa4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
+			0xa8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
+			0xac (PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
+			0xb0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
+			0xb4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
+			0xb8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
+			0xbc (PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
+			0xc0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
+			0xc4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
+			0xc8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
+			0xcc (PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
+			0xd0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
+			0xd4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
+			0xd8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
+			0xdc (PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
+			0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
+			0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
+			0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
+			0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+		>;
+	};
+
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+			0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
+			0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
+			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
+		>;
+	};
+
+	gpio_keys_s0: gpio_keys_s0 {
+		pinctrl-single,pins = <
+			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
+			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
+			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	ecap2_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value*/
+			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+
+	lis331dlh: lis331dlh@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vaux2_reg>;
+		IOVDD-supply = <&vaux2_reg>;
+		DRVDD-supply = <&vaux2_reg>;
+		DVDD-supply = <&vbat>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&epwmss2 {
+	status = "okay";
+
+	ecap2: ecap@48304100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>;
+	};
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	ti,no-reset-on-init;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&wl12xx_vmmc>;
+	ti,non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcasp1_pins>;
+
+		status = "okay";
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 4 serializers */
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 2
+		>;
+		tx-num-evt = <32>;
+		rx-num-evt = <32>;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+};
+
+&lcdc {
+      status = "okay";
+};
diff --git a/src/arm/am335x-igep0033.dtsi b/src/arm/am335x-igep0033.dtsi
new file mode 100644
index 000000000000..c0e1135256cc
--- /dev/null
+++ b/src/arm/am335x-igep0033.dtsi
@@ -0,0 +1,320 @@
+/*
+ * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
+ *
+ * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "com:green:user";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+		>;
+	};
+};
+
+&mac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rmii";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+
+	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+
+		/* MTD partition table */
+		partition@0 {
+			label = "SPL";
+			reg = <0x00000000 0x000080000>;
+		};
+
+		partition@1 {
+			label = "U-boot";
+			reg = <0x00080000 0x001e0000>;
+		};
+
+		partition@2 {
+			label = "U-Boot Env";
+			reg = <0x00260000 0x00020000>;
+		};
+
+		partition@3 {
+			label = "Kernel";
+			reg = <0x00280000 0x00500000>;
+		};
+
+		partition@4 {
+			label = "File System";
+			reg = <0x00780000 0x007880000>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
+};
+
diff --git a/src/arm/am335x-lxm.dts b/src/arm/am335x-lxm.dts
new file mode 100644
index 000000000000..7266a00aab2e
--- /dev/null
+++ b/src/arm/am335x-lxm.dts
@@ -0,0 +1,362 @@
+/*
+ * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "NovaTech OrionLXm";
+	compatible = "novatech,am335x-lxm", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	/* Power supply provides a fixed 5V @2A */
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	/* Power supply provides a fixed 3.3V @3A */
+	vmmcsd_fixed: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+&am33xx_pinmux {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
+			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
+			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
+			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
+			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_crs_dv */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rxer */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_txen */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd0 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk */
+
+			/* Slave 2 */
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_txen */
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td1 */
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td0 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd1 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd0 */
+			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_crs_dv */
+			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rxer */
+			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii2_refclk */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_crs_dv */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rxer */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_txen */
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td1 */
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd0 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk */
+
+			/* Slave 2 reset value*/
+			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_txen */
+			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td1 */
+			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td0 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd1 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd0 */
+			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_crs_dv */
+			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rxer */
+			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
+			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_refclk */
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	serial_config1: serial_config1@20 {
+		compatible = "nxp,pca9539";
+		reg = <0x20>;
+	};
+
+	serial_config2: serial_config2@21 {
+		compatible = "nxp,pca9539";
+		reg = <0x21>;
+	};
+
+	tps: tps@2d {
+		compatible = "ti,tps65910";
+		reg = <0x2d>;
+	};
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		/* vrtc - unused */
+
+		vio_reg: regulator@1 {
+			regulator-name = "vio_1v5,ddr";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-name = "vdd1,mpu";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-name = "vdd2_1v1,core";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		/* vdd3 - unused */
+
+		/* vdig1 - unused */
+
+		vdig2_reg: regulator@6 {
+			regulator-name = "vdig2_1v8,vdds_pll";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		/* vpll - unused */
+
+		vdac_reg: regulator@8 {
+			regulator-name = "vdac_1v8,vdds";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-name = "vaux1_1v8,usb";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-name = "vaux2_3v3,io";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-name = "vaux33_3v3,usb";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-name = "vmmc_3v3,io";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <5>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <4>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <3>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+	status = "okay";
+};
+
diff --git a/src/arm/am335x-nano.dts b/src/arm/am335x-nano.dts
new file mode 100644
index 000000000000..a3466455b171
--- /dev/null
+++ b/src/arm/am335x-nano.dts
@@ -0,0 +1,436 @@
+/*
+ * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "Newflow AM335x NanoBone";
+	compatible = "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "nanobone:green:usr1";
+			gpios = <&gpio1 5 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&misc_pins>;
+
+	misc_pins: misc_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
+		>;
+	};
+
+	gpmc_pins: gpmc_pins {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
+			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
+			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
+			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
+			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
+			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
+			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
+			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
+
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
+			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
+			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
+			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
+
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
+
+			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
+			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
+			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
+
+			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
+			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
+			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	uart0_pins: uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart1_pins: uart1_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
+			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
+			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
+		>;
+	};
+
+	uart2_pins: uart2_pins {
+		pinctrl-single,pins = <
+			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
+			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
+			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
+			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
+		>;
+	};
+
+	uart3_pins: uart3_pins {
+		pinctrl-single,pins = <
+			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
+			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
+			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
+			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
+		>;
+	};
+
+	uart4_pins: uart4_pins {
+		pinctrl-single,pins = <
+			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
+			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
+			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
+			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
+		>;
+	};
+
+	uart5_pins: uart5_pins {
+		pinctrl-single,pins = <
+			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
+			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
+		>;
+	};
+
+	mmc1_pins: mmc1_pins {
+		pinctrl-single,pins = <
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
+			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+	rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+	rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	gpio@20 {
+		compatible = "mcp,mcp23017";
+		reg = <0x20>;
+	};
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	eeprom@53 {
+		compatible = "mcp,24c02";
+		reg = <0x53>;
+		pagesize = <8>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	compatible = "ti,am3352-gpmc";
+	ti,hwmods = "gpmc";
+	status = "okay";
+	gpmc,num-waitpins = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x08000000 0x08000000>;	/* CS0: NOR 128M */
+
+	nor@0,0 {
+		reg = <0 0x00000000 0x08000000>;
+		compatible = "cfi-flash";
+		linux,mtd-name = "spansion,s29gl010p11t";
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <2>;
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <160>;
+		gpmc,cs-wr-off-ns = <160>;
+		gpmc,adv-on-ns = <10>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,oe-on-ns = <40>;
+		gpmc,oe-off-ns = <160>;
+		gpmc,we-on-ns = <40>;
+		gpmc,we-off-ns = <160>;
+		gpmc,rd-cycle-ns = <160>;
+		gpmc,wr-cycle-ns = <160>;
+		gpmc,access-ns = <150>;
+		gpmc,page-burst-access-ns = <10>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-delay-ns = <20>;
+		gpmc,wr-data-mux-bus-ns = <70>;
+		gpmc,wr-access-ns = <80>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		MTD partition table
+		===================
+		+------------+-->0x00000000-> U-Boot start
+		|            |
+		|            |-->0x000BFFFF-> U-Boot end
+		|            |-->0x000C0000-> ENV1 start
+		|            |
+		|            |-->0x000DFFFF-> ENV1 end
+		|            |-->0x000E0000-> ENV2 start
+		|            |
+		|            |-->0x000FFFFF-> ENV2 end
+		|            |-->0x00100000-> Kernel start
+		|            |
+		|            |-->0x004FFFFF-> Kernel end
+		|            |-->0x00500000-> File system start
+		|            |
+		|            |-->0x014FFFFF-> File system end
+		|            |-->0x01500000-> User data start
+		|            |
+		|            |-->0x03FFFFFF-> User data end
+		|            |-->0x04000000-> Data storage start
+		|            |
+		+------------+-->0x08000000-> NOR end (Free end)
+		*/
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@1 {
+			label = "env1";
+			reg = <0x000c0000 0x00020000>; /* 128KB */
+		};
+
+		partition@2 {
+			label = "env2";
+			reg = <0x000e0000 0x00020000>; /* 128KB */
+		};
+
+		partition@3 {
+			label = "kernel";
+			reg = <0x00100000 0x00400000>; /* 4MB */
+		};
+
+		partition@4 {
+			label = "rootfs";
+			reg = <0x00500000 0x01000000>; /* 16MB */
+		};
+
+		partition@5 {
+			label = "user";
+			reg = <0x01500000 0x02b00000>; /* 43MB */
+		};
+
+		partition@6 {
+			label = "data";
+			reg = <0x04000000 0x04000000>; /* 64MB */
+		};
+	};
+};
+
+&mac {
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	dual_emac_res_vlan = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo4_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 8 0>;
+	wp-gpios = <&gpio3 18 0>;
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			/* +1.5V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1450000>;
+			regulator-max-microvolt = <1550000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <915000>;
+			regulator-max-microvolt = <1140000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <915000>;
+			regulator-max-microvolt = <1140000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			/* +1.8V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1870000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			/* +3.3V voltage with ±4% tolerance */
+			regulator-min-microvolt = <3175000>;
+			regulator-max-microvolt = <3430000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			/* +1.8V voltage with ±4% tolerance */
+			regulator-min-microvolt = <1750000>;
+			regulator-max-microvolt = <1870000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			/* +3.3V voltage with ±4% tolerance */
+			regulator-min-microvolt = <3175000>;
+			regulator-max-microvolt = <3430000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/am335x-pepper.dts b/src/arm/am335x-pepper.dts
new file mode 100644
index 000000000000..0d35ab64641c
--- /dev/null
+++ b/src/arm/am335x-pepper.dts
@@ -0,0 +1,653 @@
+/*
+ * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "am33xx.dtsi"
+
+/ {
+	model = "Gumstix Pepper";
+	compatible = "gumstix,am335x-pepper", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc3_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	buttons: user_buttons {
+		compatible = "gpio-keys";
+	};
+
+	leds: user_leds {
+		compatible = "gpio-leds";
+	};
+
+	panel: lcd_panel {
+		compatible = "ti,tilcdc,panel";
+	};
+
+	sound: sound_iface {
+		compatible = "ti,da830-evm-audio";
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+	};
+
+	v3v3c_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+	};
+
+	vdd5_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+	};
+};
+
+/* I2C Busses */
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "at,24c256";
+		reg = <0x50>;
+	};
+
+	audio_codec: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+	};
+
+	accel: lis331dlh@1d {
+		compatible = "st,lis3lv02d";
+		reg = <0x1d>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux_i2c0 {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+	i2c1_pins: pinmux_i2c1 {
+		pinctrl-single,pins = <
+			0x10C (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
+		>;
+	};
+};
+
+/* Accelerometer */
+&accel {
+	pinctrl-names = "default";
+	pinctrl-0 = <&accel_pins>;
+
+	Vdd-supply = <&ldo3_reg>;
+	Vdd_IO-supply = <&ldo3_reg>;
+	st,irq1-click;
+	st,wakeup-x-lo;
+	st,wakeup-x-hi;
+	st,wakeup-y-lo;
+	st,wakeup-y-hi;
+	st,wakeup-z-lo;
+	st,wakeup-z-hi;
+	st,min-limit-x = <92>;
+	st,max-limit-x = <14>;
+	st,min-limit-y = <14>;
+	st,max-limit-y = <92>;
+	st,min-limit-z = <92>;
+	st,max-limit-z = <14>;
+};
+
+&am33xx_pinmux {
+	accel_pins: pinmux_accel {
+		pinctrl-single,pins = <
+			0x98 (PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
+		>;
+	};
+};
+
+/* Audio */
+&audio_codec {
+	status = "okay";
+
+	gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	AVDD-supply = <&ldo3_reg>;
+	IOVDD-supply = <&ldo3_reg>;
+	DRVDD-supply = <&ldo3_reg>;
+	DVDD-supply = <&dcdc1_reg>;
+};
+
+&sound {
+	ti,model = "AM335x-EVM";
+	ti,audio-codec = <&audio_codec>;
+	ti,mcasp-controller = <&mcasp0>;
+	ti,codec-clock-rate = <12000000>;
+	ti,audio-routing =
+		"Headphone Jack",	"HPLOUT",
+		"Headphone Jack",	"HPROUT",
+		"LINE1L",		"Line In";
+};
+
+&mcasp0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+
+	op-mode = <0>;	/* MCASP_ISS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <
+		1 2 0 0
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};
+
+&am33xx_pinmux {
+	audio_pins: pinmux_audio {
+		pinctrl-single,pins = <
+			0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
+			0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
+			0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
+			0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
+			0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
+			0x40 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+		>;
+	};
+};
+
+/* Display: 24-bit LCD Screen */
+&panel {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+	panel-info {
+		ac-bias = <255>;
+		ac-bias-intrpt = <0>;
+		dma-burst-sz = <16>;
+		bpp = <32>;
+		fdd = <0x80>;
+		sync-edge = <0>;
+		sync-ctrl = <1>;
+		raster-order = <0>;
+		fifo-th = <0>;
+	};
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 480x272 {
+			clock-frequency = <18400000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <4>;
+			hsync-len = <41>;
+			vfront-porch = <4>;
+			vback-porch = <2>;
+			vsync-len = <10>;
+			hsync-active = <1>;
+			vsync-active = <1>;
+		};
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	lcd_pins: pinmux_lcd {
+		pinctrl-single,pins = <
+			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
+			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
+			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
+			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
+			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
+			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
+			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
+			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
+			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
+			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			/* Display Enable */
+			0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+};
+
+/* Ethernet */
+&cpsw_emac0 {
+	status = "okay";
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&cpsw_emac1 {
+	status = "okay";
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+};
+
+&davinci_mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+};
+
+
+&am33xx_pinmux {
+	ethernet_pins: pinmux_ethernet {
+		pinctrl-single,pins = <
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			0x134 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
+			0x138 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
+			0x13c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			/* ethernet interrupt */
+			0x144 (PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
+			/* ethernet PHY nReset */
+			0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
+		>;
+	};
+
+	mdio_pins: pinmux_mdio {
+		pinctrl-single,pins = <
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+};
+
+/* MMC */
+&mmc1 {
+	/* Bootable SD card slot */
+	status = "okay";
+	vmmc-supply = <&ldo3_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc2 {
+	/* eMMC (not populated) on MMC #2 */
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&ldo3_reg>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&edma {
+	/* Map eDMA MMC2 Events from Crossbar */
+	ti,edma-xbar-event-map = /bits/ 16 <1 12
+                                            2 13>;
+};
+
+
+&mmc3 {
+	/* Wifi & Bluetooth on MMC #3 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&wireless_pins>;
+	vmmmc-supply = <&v3v3c_reg>;
+	bus-width = <4>;
+	ti,non-removable;
+	dmas = <&edma 12
+		&edma 13>;
+	dma-names = "tx", "rx";
+};
+
+
+&am33xx_pinmux {
+	sd_pins: pinmux_sd_card {
+		pinctrl-single,pins = <
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
+			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
+			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
+			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			0x160 (PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+		>;
+	};
+	emmc_pins: pinmux_emmc {
+		pinctrl-single,pins = <
+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+			/* EMMC nReset */
+			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+		>;
+	};
+	wireless_pins: pinmux_wireless {
+		pinctrl-single,pins = <
+			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
+			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
+			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
+			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
+			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
+			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
+			/* WLAN nReset */
+			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			/* WLAN nPower down */
+			0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			/* 32kHz Clock */
+			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+};
+
+/* Power */
+&vbat {
+	regulator-name = "vbat";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+};
+
+&v3v3c_reg {
+	regulator-name = "v3v3c_reg";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	vin-supply = <&vbat>;
+};
+
+&vdd5_reg {
+	regulator-name = "vdd5_reg";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+	vin-supply = <&vbat>;
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	backlight {
+		isel = <1>; /* ISET1 */
+		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
+		default-brightness = <80>;
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			/* VDD_1V8 system supply */
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			/* VRTC 1.8V always-on supply */
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			/* 3.3V rail */
+		};
+
+		ldo3_reg: regulator@5 {
+			/* VDD_3V3A 3.3V rail */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		ldo4_reg: regulator@6 {
+			/* VDD_3V3B 3.3V rail */
+		};
+	};
+};
+
+/* SPI Busses */
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+};
+
+&am33xx_pinmux {
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+			0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+			0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+			0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+		>;
+	};
+};
+
+/* Touch Screen */
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+/* UARTs */
+&uart0 {
+	/* Serial Console */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+	/* Broken out to J6 header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&am33xx_pinmux {
+	uart0_pins: pinmux_uart0 {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+	uart1_pins: pinmux_uart1 {
+		pinctrl-single,pins = <
+			0x178 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
+			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+		>;
+	};
+};
+
+/* USB */
+&usb {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_pins>;
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+        dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+        dr_mode = "host";
+};
+
+&cppi41dma {
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	usb_pins: pinmux_usb {
+		pinctrl-single,pins = <
+			/* USB0 Over-Current (active low) */
+			0x64 (PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			/* USB1 Over-Current (active low) */
+			0x68 (PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+		>;
+	};
+};
+
+/* User IO */
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&user_leds_pins>;
+
+	led@0 {
+		label = "pepper:user0:blue";
+		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		linux,default-trigger = "none";
+		default-state = "off";
+	};
+
+	led@1 {
+		label = "pepper:user1:red";
+		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		linux,default-trigger = "none";
+		default-state = "off";
+	};
+};
+
+&buttons {
+	pinctrl-names = "default";
+	pinctrl-0 = <&user_buttons_pins>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	button@0 {
+		label = "home";
+		linux,code = <KEY_HOME>;
+		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+		gpio-key,wakeup;
+	};
+
+	button@1 {
+		label = "menu";
+		linux,code = <KEY_MENU>;
+		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		gpio-key,wakeup;
+	};
+
+	buttons@2 {
+		label = "power";
+		linux,code = <KEY_POWER>;
+		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		gpio-key,wakeup;
+	};
+};
+
+&am33xx_pinmux {
+	user_leds_pins: pinmux_user_leds {
+		pinctrl-single,pins = <
+			0x50 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
+			0x54 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+		>;
+	};
+
+	user_buttons_pins: pinmux_user_buttons {
+		pinctrl-single,pins = <
+			0x58 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			0x5C (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
+			0x164 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
+		>;
+	};
+};
diff --git a/src/arm/am33xx-clocks.dtsi b/src/arm/am33xx-clocks.dtsi
new file mode 100644
index 000000000000..712edce7d6fb
--- /dev/null
+++ b/src/arm/am33xx-clocks.dtsi
@@ -0,0 +1,646 @@
+/*
+ * Device Tree Source for AM33xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm_clocks {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	rng_fck: rng_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+};
+&prcm_clocks {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0490>, <0x045c>, <0x0468>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0480>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0484>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x04d8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0488>, <0x0420>, <0x042c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0494>, <0x0434>, <0x0440>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x0498>, <0x0448>, <0x0454>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		reg = <0x04a4>;
+		ti,index-starts-at-one;
+		ti,set-rate-parent;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-no-gate-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x048c>, <0x0470>, <0x049c>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x04ac>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	cefuse_fck: cefuse_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0a20>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	clkdiv32k_ick: clkdiv32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x014c>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
+		reg = <0x0530>;
+	};
+
+	mmu_fck: mmu_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0914>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
+		reg = <0x0528>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0508>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x050c>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0510>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0518>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x051c>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x0504>;
+	};
+
+	usbotg_fck: usbotg_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x047c>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ieee5000_fck: ieee5000_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x00e4>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		reg = <0x0538>;
+	};
+
+	l4_rtc_gclk: l4_rtc_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4fw_gclk: l4fw_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sysclk_div_ck: sysclk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
+		reg = <0x0520>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
+		reg = <0x053c>;
+	};
+
+	gpio0_dbclk: gpio0_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&gpio0_dbclk_mux_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0408>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00ac>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00b0>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <18>;
+		reg = <0x00b4>;
+	};
+
+	lcd_gclk: lcd_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x0534>;
+		ti,set-rate-parent;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x052c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x052c>;
+		ti,max-div = <2>;
+	};
+
+	sysclkout_pre_ck: sysclkout_pre_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
+		reg = <0x0700>;
+	};
+
+	clkout2_div_ck: clkout2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sysclkout_pre_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <8>;
+		reg = <0x0700>;
+	};
+
+	dbg_sysclk_ck: dbg_sysclk_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0414>;
+	};
+
+	dbg_clka_ck: dbg_clka_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_core_m4_ck>;
+		ti,bit-shift = <30>;
+		reg = <0x0414>;
+	};
+
+	stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0414>;
+	};
+
+	trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0414>;
+	};
+
+	stm_clk_div_ck: stm_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&stm_pmd_clock_mux_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <64>;
+		reg = <0x0414>;
+		ti,index-power-of-two;
+	};
+
+	trace_clk_div_ck: trace_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&trace_pmd_clk_mux_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <64>;
+		reg = <0x0414>;
+		ti,index-power-of-two;
+	};
+
+	clkout2_ck: clkout2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout2_div_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0700>;
+	};
+};
+
+&prcm_clockdomains {
+	clk_24mhz_clkdm: clk_24mhz_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&clkdiv32k_ick>;
+	};
+};
diff --git a/src/arm/am33xx.dtsi b/src/arm/am33xx.dtsi
new file mode 100644
index 000000000000..acd37057bca9
--- /dev/null
+++ b/src/arm/am33xx.dtsi
@@ -0,0 +1,869 @@
+/*
+ * Device Tree Source for AM33XX SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,am33xx";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		d_can0 = &dcan0;
+		d_can1 = &dcan1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		phy0 = &usb0_phy;
+		phy1 = &usb1_phy;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0>;
+
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				720000  1285000
+				600000  1225000
+				500000  1125000
+				275000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	am33xx_control_module: control_module@4a002000 {
+		compatible = "syscon";
+		reg = <0x44e10000 0x7fc>;
+	};
+
+	am33xx_pinmux: pinmux@44e10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44e10800 0x0238>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7f>;
+	};
+
+	/*
+	 * XXX: Use a flat representation of the AM33XX interconnect.
+	 * The real AM33XX interconnect network is quite complex. Since
+	 * it will not bring real advantage to represent that in DT
+	 * for the moment, just use a fake OCP bus entry to represent
+	 * the whole bus hierarchy.
+	 */
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		prcm: prcm@44e00000 {
+			compatible = "ti,am3-prcm";
+			reg = <0x44e00000 0x4000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@44e10000 {
+			compatible = "ti,am3-scrm";
+			reg = <0x44e10000 0x2000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		cm: syscon@44e10000 {
+			compatible = "ti,am33xx-controlmodule", "syscon";
+			reg = <0x44e10000 0x800>;
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,am33xx-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x40>;
+			interrupts = <12 13 14>;
+			#dma-cells = <1>;
+		};
+
+		gpio0: gpio@44e07000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x44e07000 0x1000>;
+			interrupts = <96>;
+		};
+
+		gpio1: gpio@4804c000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x4804c000 0x1000>;
+			interrupts = <98>;
+		};
+
+		gpio2: gpio@481ac000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x481ac000 0x1000>;
+			interrupts = <32>;
+		};
+
+		gpio3: gpio@481ae000 {
+			compatible = "ti,omap4-gpio";
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x481ae000 0x1000>;
+			interrupts = <62>;
+		};
+
+		uart0: serial@44e09000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+			reg = <0x44e09000 0x2000>;
+			interrupts = <72>;
+			status = "disabled";
+			dmas = <&edma 26>, <&edma 27>;
+			dma-names = "tx", "rx";
+		};
+
+		uart1: serial@48022000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+			reg = <0x48022000 0x2000>;
+			interrupts = <73>;
+			status = "disabled";
+			dmas = <&edma 28>, <&edma 29>;
+			dma-names = "tx", "rx";
+		};
+
+		uart2: serial@48024000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+			reg = <0x48024000 0x2000>;
+			interrupts = <74>;
+			status = "disabled";
+			dmas = <&edma 30>, <&edma 31>;
+			dma-names = "tx", "rx";
+		};
+
+		uart3: serial@481a6000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+			reg = <0x481a6000 0x2000>;
+			interrupts = <44>;
+			status = "disabled";
+		};
+
+		uart4: serial@481a8000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+			reg = <0x481a8000 0x2000>;
+			interrupts = <45>;
+			status = "disabled";
+		};
+
+		uart5: serial@481aa000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+			reg = <0x481aa000 0x2000>;
+			interrupts = <46>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@44e0b000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+			reg = <0x44e0b000 0x1000>;
+			interrupts = <70>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4802a000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+			reg = <0x4802a000 0x1000>;
+			interrupts = <71>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4819c000 {
+			compatible = "ti,omap4-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+			reg = <0x4819c000 0x1000>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			ti,needs-special-hs-handling;
+			dmas = <&edma 24
+				&edma 25>;
+			dma-names = "tx", "rx";
+			interrupts = <64>;
+			interrupt-parent = <&intc>;
+			reg = <0x48060000 0x1000>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2
+				&edma 3>;
+			dma-names = "tx", "rx";
+			interrupts = <28>;
+			interrupt-parent = <&intc>;
+			reg = <0x481d8000 0x1000>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <29>;
+			interrupt-parent = <&intc>;
+			reg = <0x47810000 0x1000>;
+			status = "disabled";
+		};
+
+		hwspinlock: spinlock@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
+		wdt2: wdt@44e35000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x44e35000 0x1000>;
+			interrupts = <91>;
+		};
+
+		dcan0: can@481cc000 {
+			compatible = "ti,am3352-d_can";
+			ti,hwmods = "d_can0";
+			reg = <0x481cc000 0x2000>;
+			clocks = <&dcan0_fck>;
+			clock-names = "fck";
+			syscon-raminit = <&am33xx_control_module 0x644 0>;
+			interrupts = <52>;
+			status = "disabled";
+		};
+
+		dcan1: can@481d0000 {
+			compatible = "ti,am3352-d_can";
+			ti,hwmods = "d_can1";
+			reg = <0x481d0000 0x2000>;
+			clocks = <&dcan1_fck>;
+			clock-names = "fck";
+			syscon-raminit = <&am33xx_control_module 0x644 1>;
+			interrupts = <55>;
+			status = "disabled";
+		};
+
+		mailbox: mailbox@480C8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480C8000 0x200>;
+			interrupts = <77>;
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <8>;
+			mbox_wkupm3: wkup_m3 {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <0 0 3>;
+			};
+		};
+
+		timer1: timer@44e31000 {
+			compatible = "ti,am335x-timer-1ms";
+			reg = <0x44e31000 0x400>;
+			interrupts = <67>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48040000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x48040000 0x400>;
+			interrupts = <68>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <69>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <92>;
+			ti,hwmods = "timer4";
+			ti,timer-pwm;
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <93>;
+			ti,hwmods = "timer5";
+			ti,timer-pwm;
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <94>;
+			ti,hwmods = "timer6";
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,am335x-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer7";
+			ti,timer-pwm;
+		};
+
+		rtc: rtc@44e3e000 {
+			compatible = "ti,am3352-rtc", "ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <75
+				      76>;
+			ti,hwmods = "rtc";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48030000 0x400>;
+			interrupts = <65>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi0";
+			dmas = <&edma 16
+				&edma 17
+				&edma 18
+				&edma 19>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x481a0000 0x400>;
+			interrupts = <125>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi1";
+			dmas = <&edma 42
+				&edma 43
+				&edma 44
+				&edma 45>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+			status = "disabled";
+		};
+
+		usb: usb@47400000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47400000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "usb_otg_hs";
+			status = "disabled";
+
+			usb_ctrl_mod: control@44e10620 {
+				compatible = "ti,am335x-usb-ctrl-module";
+				reg = <0x44e10620 0x10
+					0x44e10648 0x4>;
+				reg-names = "phy_ctrl", "wakeup";
+				status = "disabled";
+			};
+
+			usb0_phy: usb-phy@47401300 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401300 0x100>;
+				reg-names = "phy";
+				status = "disabled";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+			};
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-am33xx";
+				status = "disabled";
+				reg = <0x47401400 0x400
+					0x47401000 0x200>;
+				reg-names = "mc", "control";
+
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb0_phy>;
+
+				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+					&cppi41dma  2 0 &cppi41dma  3 0
+					&cppi41dma  4 0 &cppi41dma  5 0
+					&cppi41dma  6 0 &cppi41dma  7 0
+					&cppi41dma  8 0 &cppi41dma  9 0
+					&cppi41dma 10 0 &cppi41dma 11 0
+					&cppi41dma 12 0 &cppi41dma 13 0
+					&cppi41dma 14 0 &cppi41dma  0 1
+					&cppi41dma  1 1 &cppi41dma  2 1
+					&cppi41dma  3 1 &cppi41dma  4 1
+					&cppi41dma  5 1 &cppi41dma  6 1
+					&cppi41dma  7 1 &cppi41dma  8 1
+					&cppi41dma  9 1 &cppi41dma 10 1
+					&cppi41dma 11 1 &cppi41dma 12 1
+					&cppi41dma 13 1 &cppi41dma 14 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			usb1_phy: usb-phy@47401b00 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401b00 0x100>;
+				reg-names = "phy";
+				status = "disabled";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-am33xx";
+				status = "disabled";
+				reg = <0x47401c00 0x400
+					0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb1_phy>;
+
+				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+					&cppi41dma 17 0 &cppi41dma 18 0
+					&cppi41dma 19 0 &cppi41dma 20 0
+					&cppi41dma 21 0 &cppi41dma 22 0
+					&cppi41dma 23 0 &cppi41dma 24 0
+					&cppi41dma 25 0 &cppi41dma 26 0
+					&cppi41dma 27 0 &cppi41dma 28 0
+					&cppi41dma 29 0 &cppi41dma 15 1
+					&cppi41dma 16 1 &cppi41dma 17 1
+					&cppi41dma 18 1 &cppi41dma 19 1
+					&cppi41dma 20 1 &cppi41dma 21 1
+					&cppi41dma 22 1 &cppi41dma 23 1
+					&cppi41dma 24 1 &cppi41dma 25 1
+					&cppi41dma 26 1 &cppi41dma 27 1
+					&cppi41dma 28 1 &cppi41dma 29 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			cppi41dma: dma-controller@47402000 {
+				compatible = "ti,am3359-cppi41";
+				reg =  <0x47400000 0x1000
+					0x47402000 0x1000
+					0x47403000 0x1000
+					0x47404000 0x4000>;
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
+				interrupts = <17>;
+				interrupt-names = "glue";
+				#dma-cells = <2>;
+				#dma-channels = <30>;
+				#dma-requests = <256>;
+				status = "disabled";
+			};
+		};
+
+		epwmss0: epwmss@48300000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48300000 0x10>;
+			ti,hwmods = "epwmss0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48300100 0x48300100 0x80   /* ECAP */
+				  0x48300180 0x48300180 0x80   /* EQEP */
+				  0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+			ecap0: ecap@48300100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48300100 0x80>;
+				interrupts = <31>;
+				interrupt-names = "ecap0";
+				ti,hwmods = "ecap0";
+				status = "disabled";
+			};
+
+			ehrpwm0: ehrpwm@48300200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48300200 0x80>;
+				ti,hwmods = "ehrpwm0";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48302000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48302000 0x10>;
+			ti,hwmods = "epwmss1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48302100 0x48302100 0x80   /* ECAP */
+				  0x48302180 0x48302180 0x80   /* EQEP */
+				  0x48302200 0x48302200 0x80>; /* EHRPWM */
+
+			ecap1: ecap@48302100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48302100 0x80>;
+				interrupts = <47>;
+				interrupt-names = "ecap1";
+				ti,hwmods = "ecap1";
+				status = "disabled";
+			};
+
+			ehrpwm1: ehrpwm@48302200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48302200 0x80>;
+				ti,hwmods = "ehrpwm1";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48304000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48304000 0x10>;
+			ti,hwmods = "epwmss2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48304100 0x48304100 0x80   /* ECAP */
+				  0x48304180 0x48304180 0x80   /* EQEP */
+				  0x48304200 0x48304200 0x80>; /* EHRPWM */
+
+			ecap2: ecap@48304100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48304100 0x80>;
+				interrupts = <61>;
+				interrupt-names = "ecap2";
+				ti,hwmods = "ecap2";
+				status = "disabled";
+			};
+
+			ehrpwm2: ehrpwm@48304200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48304200 0x80>;
+				ti,hwmods = "ehrpwm2";
+				status = "disabled";
+			};
+		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "cpgmac0";
+			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+			clock-names = "fck", "cpts";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			reg = <0x4a100000 0x800
+			       0x4a101200 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			/*
+			 * c0_rx_thresh_pend
+			 * c0_rx_pend
+			 * c0_tx_pend
+			 * c0_misc_pend
+			 */
+			interrupts = <40 41 42 43>;
+			ranges;
+			syscon = <&cm>;
+			status = "disabled";
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x4a101000 0x100>;
+				status = "disabled";
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			phy_sel: cpsw-phy-sel@44e10650 {
+				compatible = "ti,am3352-cpsw-phy-sel";
+				reg= <0x44e10650 0x4>;
+				reg-names = "gmii-sel";
+			};
+		};
+
+		ocmcram: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x10000>; /* 64k */
+		};
+
+		wkup_m3: wkup_m3@44d00000 {
+			compatible = "ti,am3353-wkup-m3";
+			reg = <0x44d00000 0x4000	/* M3 UMEM */
+			       0x44d80000 0x2000>;	/* M3 DMEM */
+			ti,hwmods = "wkup_m3";
+			ti,no-reset-on-init;
+		};
+
+		elm: elm@48080000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <4>;
+			ti,hwmods = "elm";
+			status = "disabled";
+		};
+
+		lcdc: lcdc@4830e000 {
+			compatible = "ti,am33xx-tilcdc";
+			reg = <0x4830e000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <36>;
+			ti,hwmods = "lcdc";
+			status = "disabled";
+		};
+
+		tscadc: tscadc@44e0d000 {
+			compatible = "ti,am3359-tscadc";
+			reg = <0x44e0d000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+			ti,hwmods = "adc_tsc";
+			status = "disabled";
+
+			tsc {
+				compatible = "ti,am3359-tsc";
+			};
+			am335x_adc: adc {
+				#io-channel-cells = <1>;
+				compatible = "ti,am3359-adc";
+			};
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
+			reg = <0x50000000 0x2000>;
+			interrupts = <100>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap4-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x200>;
+			interrupts = <109>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+		};
+
+		aes: aes@53500000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x53500000 0xa0>;
+			interrupts = <103>;
+			dmas = <&edma 6>,
+			       <&edma 5>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp0: mcasp@48038000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp0";
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <80>, <81>;
+			interrupt-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 8>,
+				<&edma 9>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp1: mcasp@4803C000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <82>, <83>;
+			interrupt-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 10>,
+				<&edma 11>;
+			dma-names = "tx", "rx";
+		};
+
+		rng: rng@48310000 {
+			compatible = "ti,omap4-rng";
+			ti,hwmods = "rng";
+			reg = <0x48310000 0x2000>;
+			interrupts = <111>;
+		};
+	};
+};
+
+/include/ "am33xx-clocks.dtsi"
diff --git a/src/arm/am3517-craneboard.dts b/src/arm/am3517-craneboard.dts
new file mode 100644
index 000000000000..2d40b3f241cd
--- /dev/null
+++ b/src/arm/am3517-craneboard.dts
@@ -0,0 +1,174 @@
+/*
+ * See craneboard.org for more details
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+
+/ {
+	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
+	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&davinci_emac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&mmc1 {
+	vmmc-supply = <&vdd2_reg>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+&mmc3 {
+	/* goes to expansion connector */
+	status = "disabled";
+};
+
+#include "tps65910.dtsi"
+
+&omap3_pmx_core {
+	tps_pins: pinmux_tps_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+};
+
+&tps {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tps_pins>;
+
+	interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	interrupt-parent = <&intc>;
+
+	ti,en-ck32k-xtal;
+
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		/*
+		 * Unused:
+		 * VDIG1=2.7V,300mA max
+		 * VDIG2=1.8V,300mA max
+		 */
+
+		vpll_reg: regulator@7 {
+			/* VDDS_DPLL_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			/* VDDS_SRAM_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			/* VDDA1P8V_USBPHY */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		/* VAUX33 unused */
+
+		vdac_reg: regulator@8 {
+			/* VDDA_DAC_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			/* VDDA3P3V_USBPHY */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_CORE */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDDSHV_3V3 */
+			regulator-name = "vdd_shv";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		/* VDD3 unused */
+	};
+};
diff --git a/src/arm/am3517-evm.dts b/src/arm/am3517-evm.dts
new file mode 100644
index 000000000000..b4127c6493a2
--- /dev/null
+++ b/src/arm/am3517-evm.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+
+/ {
+	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
+	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+        vmmc_fixed: vmmc {
+                compatible = "regulator-fixed";
+                regulator-name = "vmmc_fixed";
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+        };
+};
+
+&davinci_emac {
+	     status = "okay";
+};
+
+&davinci_mdio {
+	     status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc_fixed>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+      status = "disabled";
+};
+
+&mmc3 {
+      status = "disabled";
+};
+
diff --git a/src/arm/am3517.dtsi b/src/arm/am3517.dtsi
new file mode 100644
index 000000000000..c90724bded10
--- /dev/null
+++ b/src/arm/am3517.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Device Tree Source for am3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	ocp {
+		am35x_otg_hs: am35x_otg_hs@5c040000 {
+			compatible = "ti,omap3-musb";
+			ti,hwmods = "am35x_otg_hs";
+			status = "disabled";
+			reg = <0x5c040000 0x1000>;
+			interrupts = <71>;
+			interrupt-names = "mc";
+		};
+
+		davinci_emac: ethernet@0x5c000000 {
+			compatible = "ti,am3517-emac";
+			ti,hwmods = "davinci_emac";
+			status = "disabled";
+			reg = <0x5c000000 0x30000>;
+			interrupts = <67 68 69 70>;
+			syscon = <&omap3_scm_general>;
+			ti,davinci-ctrl-reg-offset = <0x10000>;
+			ti,davinci-ctrl-mod-reg-offset = <0>;
+			ti,davinci-ctrl-ram-offset = <0x20000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			ti,davinci-rmii-en = /bits/ 8 <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+
+		davinci_mdio: ethernet@0x5c030000 {
+			compatible = "ti,davinci_mdio";
+			ti,hwmods = "davinci_mdio";
+			status = "disabled";
+			reg = <0x5c030000 0x1000>;
+			bus_freq = <1000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart4: serial@4809e000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			status = "disabled";
+			reg = <0x4809e000 0x400>;
+			interrupts = <84>;
+			dmas = <&sdma 55 &sdma 54>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+	};
+};
+
+&iva {
+	status = "disabled";
+};
+
+&mailbox {
+	status = "disabled";
+};
+
+&mmu_isp {
+	status = "disabled";
+};
+
+&smartreflex_mpu_iva {
+	status = "disabled";
+};
+
+/include/ "am35xx-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/src/arm/am3517_mt_ventoux.dts b/src/arm/am3517_mt_ventoux.dts
new file mode 100644
index 000000000000..fdf5ce63c8e6
--- /dev/null
+++ b/src/arm/am3517_mt_ventoux.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+	model = "TeeJet Mt.Ventoux";
+	compatible = "teejet,mt_ventoux", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	/* AM35xx doesn't have IVA */
+	soc {
+		iva {
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/am35xx-clocks.dtsi b/src/arm/am35xx-clocks.dtsi
new file mode 100644
index 000000000000..df489d310b50
--- /dev/null
+++ b/src/arm/am35xx-clocks.dtsi
@@ -0,0 +1,128 @@
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm_clocks {
+	emac_ick: emac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <1>;
+	};
+
+	emac_fck: emac_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&rmii_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <9>;
+	};
+
+	vpfe_ick: vpfe_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <2>;
+	};
+
+	vpfe_fck: vpfe_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pclk_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <10>;
+	};
+
+	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&ipss_ick>;
+		reg = <0x059c>;
+		ti,bit-shift = <0>;
+	};
+
+	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <8>;
+	};
+
+	hecc_ck: hecc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x059c>;
+		ti,bit-shift = <3>;
+	};
+};
+&cm_clocks {
+	ipss_ick: ipss_ick {
+		#clock-cells = <0>;
+		compatible = "ti,am35xx-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	rmii_ck: rmii_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	pclk_ck: pclk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	uart4_ick_am35xx: uart4_ick_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	uart4_fck_am35xx: uart4_fck_am35xx {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
+			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
+			 <&hecc_ck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
+	};
+};
diff --git a/src/arm/am4372.dtsi b/src/arm/am4372.dtsi
new file mode 100644
index 000000000000..1943fc333e7c
--- /dev/null
+++ b/src/arm/am4372.dtsi
@@ -0,0 +1,970 @@
+/*
+ * Device Tree Source for AM4372 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,am4372", "ti,am43";
+	interrupt-parent = <&gic>;
+
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+	};
+
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+	};
+
+	l2-cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	am43xx_control_module: control_module@4a002000 {
+		compatible = "syscon";
+		reg = <0x44e10000 0x7f4>;
+	};
+
+	am43xx_pinmux: pinmux@44e10800 {
+		compatible = "ti,am437-padconf", "pinctrl-single";
+		reg = <0x44e10800 0x31c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	ocp {
+		compatible = "ti,am4372-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+		reg = <0x44000000 0x400000
+		       0x44800000 0x400000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		prcm: prcm@44df0000 {
+			compatible = "ti,am4-prcm";
+			reg = <0x44df0000 0x11000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@44e10000 {
+			compatible = "ti,am4-scrm";
+			reg = <0x44e10000 0x2000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x10>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@44e09000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x44e09000 0x2000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+		};
+
+		uart1: serial@48022000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48022000 0x2000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			status = "disabled";
+		};
+
+		uart2: serial@48024000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48024000 0x2000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			status = "disabled";
+		};
+
+		uart3: serial@481a6000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a6000 0x2000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			status = "disabled";
+		};
+
+		uart4: serial@481a8000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a8000 0x2000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			status = "disabled";
+		};
+
+		uart5: serial@481aa000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481aa000 0x2000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			status = "disabled";
+		};
+
+		mailbox: mailbox@480C8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480C8000 0x200>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <8>;
+			mbox_wkupm3: wkup_m3 {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <0 0 3>;
+			};
+		};
+
+		timer1: timer@44e31000 {
+			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
+			reg = <0x44e31000 0x400>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-alwon;
+			ti,hwmods = "timer1";
+		};
+
+		timer2: timer@48040000  {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48040000  0x400>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+			status = "disabled";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer4";
+			status = "disabled";
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer5";
+			status = "disabled";
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer6";
+			status = "disabled";
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer7";
+			status = "disabled";
+		};
+
+		timer8: timer@481c1000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x481c1000 0x400>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			status = "disabled";
+		};
+
+		timer9: timer@4833d000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833d000 0x400>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+			status = "disabled";
+		};
+
+		timer10: timer@4833f000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833f000 0x400>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+			status = "disabled";
+		};
+
+		timer11: timer@48341000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48341000 0x400>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			status = "disabled";
+		};
+
+		counter32k: counter@44e86000 {
+			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
+			reg = <0x44e86000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		rtc: rtc@44e3e000 {
+			compatible = "ti,am4372-rtc","ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "rtc";
+			status = "disabled";
+		};
+
+		wdt: wdt@44e35000 {
+			compatible = "ti,am4372-wdt","ti,omap3-wdt";
+			reg = <0x44e35000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		gpio0: gpio@44e07000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x44e07000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio1";
+			status = "disabled";
+		};
+
+		gpio1: gpio@4804c000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x4804c000 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio2";
+			status = "disabled";
+		};
+
+		gpio2: gpio@481ac000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ac000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio3";
+			status = "disabled";
+		};
+
+		gpio3: gpio@481ae000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ae000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio4";
+			status = "disabled";
+		};
+
+		gpio4: gpio@48320000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48320000 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio5";
+			status = "disabled";
+		};
+
+		gpio5: gpio@48322000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48322000 0x1000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio6";
+			status = "disabled";
+		};
+
+		hwspinlock: spinlock@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
+		i2c0: i2c@44e0b000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x44e0b000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4802a000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4802a000 0x1000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4819c000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4819c000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48030000 0x400>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi0";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x48060000 0x1000>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&edma 24
+				&edma 25>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x481d8000 0x1000>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2
+				&edma 3>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x47810000 0x1000>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a0000 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@481a2000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a2000 0x400>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@481a4000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a4000 0x400>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@48345000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48345000 0x400>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi4";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,am4372-cpsw","ti,cpsw";
+			reg = <0x4a100000 0x800
+			       0x4a101200 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "cpgmac0";
+			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+			clock-names = "fck", "cpts";
+			status = "disabled";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			ranges;
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,am4372-mdio","ti,davinci_mdio";
+				reg = <0x4a101000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				status = "disabled";
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			phy_sel: cpsw-phy-sel@44e10650 {
+				compatible = "ti,am43xx-cpsw-phy-sel";
+				reg= <0x44e10650 0x4>;
+				reg-names = "gmii-sel";
+			};
+		};
+
+		epwmss0: epwmss@48300000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48300000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss0";
+			status = "disabled";
+
+			ecap0: ecap@48300100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48300100 0x80>;
+				ti,hwmods = "ecap0";
+				status = "disabled";
+			};
+
+			ehrpwm0: ehrpwm@48300200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48300200 0x80>;
+				ti,hwmods = "ehrpwm0";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48302000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48302000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss1";
+			status = "disabled";
+
+			ecap1: ecap@48302100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48302100 0x80>;
+				ti,hwmods = "ecap1";
+				status = "disabled";
+			};
+
+			ehrpwm1: ehrpwm@48302200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48302200 0x80>;
+				ti,hwmods = "ehrpwm1";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48304000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48304000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss2";
+			status = "disabled";
+
+			ecap2: ecap@48304100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48304100 0x80>;
+				ti,hwmods = "ecap2";
+				status = "disabled";
+			};
+
+			ehrpwm2: ehrpwm@48304200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48304200 0x80>;
+				ti,hwmods = "ehrpwm2";
+				status = "disabled";
+			};
+		};
+
+		epwmss3: epwmss@48306000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48306000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss3";
+			status = "disabled";
+
+			ehrpwm3: ehrpwm@48306200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48306200 0x80>;
+				ti,hwmods = "ehrpwm3";
+				status = "disabled";
+			};
+		};
+
+		epwmss4: epwmss@48308000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48308000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss4";
+			status = "disabled";
+
+			ehrpwm4: ehrpwm@48308200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48308200 0x80>;
+				ti,hwmods = "ehrpwm4";
+				status = "disabled";
+			};
+		};
+
+		epwmss5: epwmss@4830a000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x4830a000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss5";
+			status = "disabled";
+
+			ehrpwm5: ehrpwm@4830a200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x4830a200 0x80>;
+				ti,hwmods = "ehrpwm5";
+				status = "disabled";
+			};
+		};
+
+		tscadc: tscadc@44e0d000 {
+			compatible = "ti,am3359-tscadc";
+			reg = <0x44e0d000 0x1000>;
+			ti,hwmods = "adc_tsc";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&adc_tsc_fck>;
+			clock-names = "fck";
+			status = "disabled";
+
+			tsc {
+				compatible = "ti,am3359-tsc";
+			};
+
+			adc {
+				#io-channel-cells = <1>;
+				compatible = "ti,am3359-adc";
+			};
+
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap5-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x300>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aes: aes@53501000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x53501000 0xa0>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 6
+				&edma 5>;
+			dma-names = "tx", "rx";
+		};
+
+		des: des@53701000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x53701000 0xa0>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 34
+				&edma 33>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp0: mcasp@48038000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp0";
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <80>, <81>;
+			interrupt-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 8>,
+			       <&edma 9>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp1: mcasp@4803C000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <82>, <83>;
+			interrupt-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 10>,
+			       <&edma 11>;
+			dma-names = "tx", "rx";
+		};
+
+		elm: elm@48080000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "elm";
+			clocks = <&l4ls_gclk>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			clocks = <&l3s_gclk>;
+			clock-names = "fck";
+			reg = <0x50000000 0x2000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		am43xx_control_usb2phy1: control-phy@44e10620 {
+			compatible = "ti,control-phy-usb2-am437";
+			reg = <0x44e10620 0x4>;
+			reg-names = "power";
+		};
+
+		am43xx_control_usb2phy2: control-phy@0x44e10628 {
+			compatible = "ti,control-phy-usb2-am437";
+			reg = <0x44e10628 0x4>;
+			reg-names = "power";
+		};
+
+		ocp2scp0: ocp2scp@483a8000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp0";
+
+			usb2_phy1: phy@483a8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483a8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy1>;
+				clocks = <&usb_phy0_always_on_clk32k>,
+					 <&usb_otg_ss0_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ocp2scp1: ocp2scp@483e8000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp1";
+
+			usb2_phy2: phy@483e8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483e8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy2>;
+				clocks = <&usb_phy1_always_on_clk32k>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dwc3_1: omap_dwc3@48380000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss0";
+			reg = <0x48380000 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+
+			usb1: usb@48390000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x48390000 0x10000>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				status = "disabled";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		dwc3_2: omap_dwc3@483c0000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss1";
+			reg = <0x483c0000 0x10000>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+
+			usb2: usb@483d0000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x483d0000 0x10000>;
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy2>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				status = "disabled";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		qspi: qspi@47900000 {
+			compatible = "ti,am4372-qspi";
+			reg = <0x47900000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "qspi";
+			interrupts = <0 138 0x4>;
+			num-cs = <4>;
+			status = "disabled";
+		};
+
+		hdq: hdq@48347000 {
+			compatible = "ti,am43xx-hdq";
+			reg = <0x48347000 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&func_12m_clk>;
+			clock-names = "fck";
+			ti,hwmods = "hdq1w";
+			status = "disabled";
+		};
+
+		dss: dss@4832a000 {
+			compatible = "ti,omap3-dss";
+			reg = <0x4832a000 0x200>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&disp_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc: dispc@4832a400 {
+				compatible = "ti,omap3-dispc";
+				reg = <0x4832a400 0x400>;
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+			};
+
+			rfbi: rfbi@4832a800 {
+				compatible = "ti,omap3-rfbi";
+				reg = <0x4832a800 0x100>;
+				ti,hwmods = "dss_rfbi";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+			};
+		};
+
+		ocmcram: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x40000>; /* 256k */
+		};
+
+		dcan0: can@481cc000 {
+			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+			ti,hwmods = "d_can0";
+			clocks = <&dcan0_fck>;
+			clock-names = "fck";
+			reg = <0x481cc000 0x2000>;
+			syscon-raminit = <&am43xx_control_module 0x644 0>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		dcan1: can@481d0000 {
+			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+			ti,hwmods = "d_can1";
+			clocks = <&dcan1_fck>;
+			clock-names = "fck";
+			reg = <0x481d0000 0x2000>;
+			syscon-raminit = <&am43xx_control_module 0x644 1>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vpfe0: vpfe@48326000 {
+			compatible = "ti,am437x-vpfe";
+			reg = <0x48326000 0x2000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "vpfe0";
+			status = "disabled";
+		};
+
+		vpfe1: vpfe@48328000 {
+			compatible = "ti,am437x-vpfe";
+			reg = <0x48328000 0x2000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "vpfe1";
+			status = "disabled";
+		};
+	};
+};
+
+/include/ "am43xx-clocks.dtsi"
diff --git a/src/arm/am437x-gp-evm.dts b/src/arm/am437x-gp-evm.dts
new file mode 100644
index 000000000000..f84d9715a4a9
--- /dev/null
+++ b/src/arm/am437x-gp-evm.dts
@@ -0,0 +1,653 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x GP EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TI AM437x GP EVM";
+	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
+				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
+				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
+
+		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
+				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
+
+		linux,keymap = <0x00000201      /* P1 */
+				0x00010202      /* P2 */
+				0x01000067      /* UP */
+				0x0101006a      /* RIGHT */
+				0x02000069      /* LEFT */
+				0x0201006c>;      /* DOWN */
+		};
+
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		/*
+		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
+		 * panel's enable GPIO, but we don't have HDMI driver support nor
+		 * support to switch between two displays, so using this gpio as
+		 * panel's enable should be safe.
+		 */
+		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+&am43xx_pinmux {
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	pixcir_ts_pins: pixcir_ts_pins {
+		pinctrl-single,pins = <
+			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
+			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+		>;
+	};
+
+	lcd_pins: lcd_pins {
+		pinctrl-single,pins = <
+			/* GPIO 5_8 to select LCD / HDMI */
+			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	dcan0_default: dcan0_default_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
+			0x17c (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+		>;
+	};
+
+	dcan1_default: dcan1_default_pins {
+		pinctrl-single,pins = <
+			0x180 (PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
+			0x184 (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
+		>;
+	};
+
+	vpfe0_pins_default: vpfe0_pins_default {
+		pinctrl-single,pins = <
+			0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			0x20C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			0x21C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe0_pins_sleep: vpfe0_pins_sleep {
+		pinctrl-single,pins = <
+			0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
+			0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
+			0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
+			0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
+			0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
+			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
+			0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
+			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
+			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
+			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
+			0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
+			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
+			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_default: vpfe1_pins_default {
+		pinctrl-single,pins = <
+			0x1CC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
+			0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
+			0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
+			0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
+			0x1DC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
+			0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
+			0x1EC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
+			0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
+			0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
+			0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
+			0x1FC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
+			0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
+			0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_sleep: vpfe1_pins_sleep {
+		pinctrl-single,pins = <
+			0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
+			0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
+			0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
+			0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
+			0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
+			0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
+			0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
+			0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
+			0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
+			0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
+			0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
+			0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
+			0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+
+	tps65218: tps65218@24 {
+		reg = <0x24>;
+		compatible = "ti,tps65218";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			compatible = "ti,tps65218-dcdc1";
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			compatible = "ti,tps65218-dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			compatible = "ti,tps65218-dcdc3";
+			regulator-name = "vdcdc3";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,tps65218-ldo1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pixcir_ts_pins>;
+		reg = <0x5c>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+
+		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		reg = <0 0 4>;		/* device IO registers */
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <25>;
+		gpmc,adv-wr-off-ns = <25>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <3>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,wait-pin = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000c0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002c0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_default>;
+	status = "okay";
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_default>;
+	status = "okay";
+};
+
+&vpfe0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe0_pins_default>;
+	pinctrl-1 = <&vpfe0_pins_sleep>;
+
+	port {
+		vpfe0_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	port {
+		vpfe1_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
diff --git a/src/arm/am437x-idk-evm.dts b/src/arm/am437x-idk-evm.dts
new file mode 100644
index 000000000000..f9a17e2ca8cb
--- /dev/null
+++ b/src/arm/am437x-idk-evm.dts
@@ -0,0 +1,405 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TI AM437x Industrial Development Kit";
+	compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43";
+
+	v24_0d: fixed-regulator-v24_0d {
+		compatible = "regulator-fixed";
+		regulator-name = "V24_0D";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v3_3d: fixed-regulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "V3_3D";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	vdd_corereg: fixed-regulator-vdd_corereg {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_COREREG";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	vdd_core: fixed-regulator-vdd_core {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_CORE";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_corereg>;
+	};
+
+	v1_8dreg: fixed-regulator-v1_8dreg{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_8DREG";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	v1_8d: fixed-regulator-v1_8d{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_8D";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v1_8dreg>;
+	};
+
+	v1_5dreg: fixed-regulator-v1_5dreg{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_5DREG";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v24_0d>;
+	};
+
+	v1_5d: fixed-regulator-v1_5d{
+		compatible = "regulator-fixed";
+		regulator-name = "V1_5D";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&v1_5dreg>;
+	};
+
+	gpio_keys: gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			label = "power-button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&am43xx_pinmux {
+	gpio_keys_pins_default: gpio_keys_pins_default {
+		pinctrl-single,pins = <
+			0x1b8 (PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
+		>;
+	};
+
+	i2c0_pins_default: i2c0_pins_default {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c0_pins_sleep: i2c0_pins_sleep {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	i2c1_pins_default: i2c1_pins_default {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
+		>;
+	};
+
+	i2c1_pins_sleep: i2c1_pins_sleep {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */
+		>;
+	};
+
+	mmc1_pins_default: pinmux_mmc1_pins_default {
+		pinctrl-single,pins = <
+			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+		pinctrl-single,pins = <
+			0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	ecap0_pins_default: backlight_pins_default {
+		pinctrl-single,pins = <
+			0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	qspi_pins_default: qspi_pins_default {
+		pinctrl-single,pins = <
+			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
+			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+		>;
+	};
+
+	qspi_pins_sleep: qspi_pins_sleep{
+		pinctrl-single,pins = <
+			0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c0_pins_default>;
+	pinctrl-1 = <&i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_default>;
+	pinctrl-1 = <&i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	tps: tps62362@60 {
+		compatible = "ti,tps62362";
+		regulator-name = "VDD_MPU";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1330000>;
+		regulator-boot-on;
+		regulator-always-on;
+		ti,vsel0-state-high;
+		ti,vsel1-state-high;
+		vin-supply = <&v3_3d>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_sleep>;
+	vmmc-supply = <&v3_3d>;
+	bus-width = <4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_pins_default>;
+	pinctrl-1 = <&qspi_pins_sleep>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * MTD partition table.  The ROM checks the first 512KiB for a
+		 * valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&cpu {
+	cpu0-supply = <&tps>;
+};
diff --git a/src/arm/am437x-sk-evm.dts b/src/arm/am437x-sk-evm.dts
new file mode 100644
index 000000000000..832d24318f62
--- /dev/null
+++ b/src/arm/am437x-sk-evm.dts
@@ -0,0 +1,701 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x SK EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TI AM437x SK EVM";
+	compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM437x-SK-EVM";
+		ti,audio-codec = <&tlv320aic3106>;
+		ti,mcasp-controller = <&mcasp1>;
+		ti,codec-clock-rate = <24000000>;
+		ti,audio-routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT";
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&matrix_keypad_pins>;
+
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <1500>;
+
+		row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH		/* Bank5, pin5 */
+				&gpio5 6 GPIO_ACTIVE_HIGH>;	/* Bank5, pin6 */
+
+		col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH		/* Bank5, pin13 */
+				&gpio5 4 GPIO_ACTIVE_HIGH>;	/* Bank5, pin4 */
+
+		linux,keymap = <
+				MATRIX_KEY(0, 0, KEY_DOWN)
+				MATRIX_KEY(0, 1, KEY_RIGHT)
+				MATRIX_KEY(1, 0, KEY_LEFT)
+				MATRIX_KEY(1, 1, KEY_UP)
+			>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		led@0 {
+			label = "am437x-sk:red:heartbeat";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "am437x-sk:green:mmc1";
+			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "am437x-sk:blue:cpu0";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "am437x-sk:blue:usr3";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
+			default-state = "off";
+		};
+	};
+
+	lcd0: display {
+		compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <2>;
+			hback-porch = <2>;
+			hsync-len = <41>;
+			vfront-porch = <2>;
+			vback-porch = <2>;
+			vsync-len = <10>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+&am43xx_pinmux {
+	matrix_keypad_pins: matrix_keypad_pins {
+		pinctrl-single,pins = <
+			0x24c (PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
+			0x250 (PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
+			0x254 (PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
+			0x258 (PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
+		>;
+	};
+
+	leds_pins: leds_pins {
+		pinctrl-single,pins = <
+			0x228 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
+			0x22c (PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
+			0x230 (PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
+			0x234 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+		>;
+	};
+
+	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
+		pinctrl-single,pins = <
+			0x74 (PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			0x78 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
+		>;
+	};
+
+	vpfe0_pins_default: vpfe0_pins_default {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
+			0x1bc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
+			0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			0x20c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			0x21c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe0_pins_sleep: vpfe0_pins_sleep {
+		pinctrl-single,pins = <
+			0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x12c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			0x114 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			0x128 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			0x124 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			0x120 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			0x11c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			0x130 (PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x118 (PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			0x140 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			0x13c (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			0x138 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			0x134 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+
+			/* Slave 2 */
+			0x58 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			0x40 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			0x54 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			0x50 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			0x4c (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			0x48 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			0x5c (PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			0x44 (PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
+			0x6c (PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			0x68 (PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			0x64 (PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			0x60 (PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value */
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			0x020 (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
+			0x024 (PIN_OUTPUT | MUX_MODE1)
+			0x028 (PIN_OUTPUT | MUX_MODE1)
+			0x02c (PIN_OUTPUT | MUX_MODE1)
+			0x030 (PIN_OUTPUT | MUX_MODE1)
+			0x034 (PIN_OUTPUT | MUX_MODE1)
+			0x038 (PIN_OUTPUT | MUX_MODE1)
+			0x03c (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
+			0x0a0 (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
+			0x0a4 (PIN_OUTPUT | MUX_MODE0)
+			0x0a8 (PIN_OUTPUT | MUX_MODE0)
+			0x0ac (PIN_OUTPUT | MUX_MODE0)
+			0x0b0 (PIN_OUTPUT | MUX_MODE0)
+			0x0b4 (PIN_OUTPUT | MUX_MODE0)
+			0x0b8 (PIN_OUTPUT | MUX_MODE0)
+			0x0bc (PIN_OUTPUT | MUX_MODE0)
+			0x0c0 (PIN_OUTPUT | MUX_MODE0)
+			0x0c4 (PIN_OUTPUT | MUX_MODE0)
+			0x0c8 (PIN_OUTPUT | MUX_MODE0)
+			0x0cc (PIN_OUTPUT | MUX_MODE0)
+			0x0d0 (PIN_OUTPUT | MUX_MODE0)
+			0x0d4 (PIN_OUTPUT | MUX_MODE0)
+			0x0d8 (PIN_OUTPUT | MUX_MODE0)
+			0x0dc (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
+			0x0e0 (PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
+			0x0e4 (PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
+			0x0e8 (PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
+			0x0ec (PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
+
+		>;
+	};
+
+	qspi_pins: qspi_pins {
+		pinctrl-single,pins = <
+			0x7c (PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			0x88 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
+			0x90 (PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			0x94 (PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			0x98 (PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			0x9c (PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	lcd_pins: lcd_pins {
+		pinctrl-single,pins = <
+			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
+		>;
+	};
+
+	usb1_pins: usb1_pins {
+		pinctrl-single,pins = <
+			0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+		>;
+	};
+
+	usb2_pins: usb2_pins {
+		pinctrl-single,pins = <
+			0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	tps@24 {
+		compatible = "ti,tps65218";
+		reg = <0x24>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			compatible = "ti,tps65218-dcdc1";
+			/* VDD_CORE limits min of OPP50 and max of OPP100 */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			compatible = "ti,tps65218-dcdc2";
+			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			compatible = "ti,tps65218-dcdc3";
+			regulator-name = "vdds_ddr";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc4: regulator-dcdc4 {
+			compatible = "ti,tps65218-dcdc4";
+			regulator-name = "v3_3d";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,tps65218-ldo1";
+			regulator-name = "v1_8d";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		power-button {
+			compatible = "ti,tps65218-pwrbutton";
+			status = "okay";
+			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+		};
+	};
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	edt-ft5306@38 {
+		status = "okay";
+		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
+		pinctrl-names = "default";
+		pinctrl-0 = <&edt_ft5306_ts_pins>;
+
+		reg = <0x38>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <31 0>;
+
+		wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <272>;
+	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&dcdc4>;
+		IOVDD-supply = <&dcdc4>;
+		DRVDD-supply = <&dcdc4>;
+		DVDD-supply = <&ldo1>;
+	};
+
+	lis331dlh@18 {
+		compatible = "st,lis331dlh";
+		reg = <0x18>;
+		status = "okay";
+
+		Vdd-supply = <&dcdc4>;
+		Vdd_IO-supply = <&dcdc4>;
+		interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	vmmc-supply = <&dcdc4>;
+	bus-width = <4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_pins>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_pins>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first 512KiB
+		 * for a valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <4>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <5>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&mcasp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp1_pins>;
+
+	status = "okay";
+
+	op-mode = <0>;
+	tdm-slots = <2>;
+	serial-dir = <
+		0 0 1 2
+	>;
+
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+};
+
+&vpfe0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe0_pins_default>;
+	pinctrl-1 = <&vpfe0_pins_sleep>;
+
+	/* Camera port */
+	port {
+		vpfe0_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
diff --git a/src/arm/am43x-epos-evm.dts b/src/arm/am43x-epos-evm.dts
new file mode 100644
index 000000000000..257c099c347e
--- /dev/null
+++ b/src/arm/am43x-epos-evm.dts
@@ -0,0 +1,689 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM43x EPOS EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "TI AM43x EPOS EVM";
+	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		/*
+		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
+		 * panel's enable GPIO, but we don't have HDMI driver support nor
+		 * support to switch between two displays, so using this gpio as
+		 * panel's enable should be safe.
+		 */
+		enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	am43xx_pinmux: pinmux@44e10800 {
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		nand_flash_x8: nand_flash_x8 {
+			pinctrl-single,pins = <
+				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
+				0x0  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				0x4  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				0x8  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				0xc  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			>;
+		};
+
+		ecap0_pins: backlight_pins {
+			pinctrl-single,pins = <
+				0x164 MUX_MODE0         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			>;
+		};
+
+		i2c2_pins: pinmux_i2c2_pins {
+			pinctrl-single,pins = <
+				0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
+				0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
+			>;
+		};
+
+		spi0_pins: pinmux_spi0_pins {
+			pinctrl-single,pins = <
+				0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
+				0x154 (PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
+				0x158 (PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
+				0x15c (PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
+			>;
+		};
+
+		spi1_pins: pinmux_spi1_pins {
+			pinctrl-single,pins = <
+				0x190 (PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
+				0x194 (PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
+				0x198 (PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
+				0x19c (PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
+			>;
+		};
+
+		mmc1_pins: pinmux_mmc1_pins {
+			pinctrl-single,pins = <
+				0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			>;
+		};
+
+		qspi1_default: qspi1_default {
+			pinctrl-single,pins = <
+				0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
+				0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
+				0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
+			>;
+		};
+
+		pixcir_ts_pins: pixcir_ts_pins {
+			pinctrl-single,pins = <
+				0x44 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+			>;
+		};
+
+		hdq_pins: pinmux_hdq_pins {
+			pinctrl-single,pins = <
+				0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
+			>;
+		};
+
+		dss_pins: dss_pins {
+			pinctrl-single,pins = <
+				0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+				0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+				0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+				0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+				0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+				0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+				0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+				0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+				0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+				0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			>;
+		};
+
+		lcd_pins: lcd_pins {
+			pinctrl-single,pins = <
+				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
+				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+			>;
+		};
+
+		vpfe1_pins_default: vpfe1_pins_default {
+			pinctrl-single,pins = <
+				0x1cc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
+				0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
+				0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
+				0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
+				0x1dc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
+				0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
+				0x1ec (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
+				0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
+				0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
+				0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
+				0x1fc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
+				0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
+				0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
+			>;
+		};
+
+		vpfe1_pins_sleep: vpfe1_pins_sleep {
+			pinctrl-single,pins = <
+				0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			>;
+		};
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+			compatible = "gpio-matrix-keypad";
+			debounce-delay-ms = <5>;
+			col-scan-delay-us = <2>;
+
+			row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
+				     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
+				     &gpio0 14 GPIO_ACTIVE_HIGH		/* Bank0, pin14 */
+				     &gpio0 15 GPIO_ACTIVE_HIGH>;	/* Bank0, pin15 */
+
+			col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH		/* Bank3, pin9 */
+				     &gpio3 10 GPIO_ACTIVE_HIGH		/* Bank3, pin10 */
+				     &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
+				     &gpio2 19 GPIO_ACTIVE_HIGH>;	/* Bank2, pin19 */
+
+			linux,keymap = <0x00000201	/* P1 */
+				0x01000204	/* P4 */
+				0x02000207	/* P7 */
+				0x0300020a	/* NUMERIC_STAR */
+				0x00010202	/* P2 */
+				0x01010205	/* P5 */
+				0x02010208	/* P8 */
+				0x03010200	/* P0 */
+				0x00020203	/* P3 */
+				0x01020206	/* P6 */
+				0x02020209	/* P9 */
+				0x0302020b	/* NUMERIC_POUND */
+				0x00030067	/* UP */
+				0x0103006a	/* RIGHT */
+				0x0203006c	/* DOWN */
+				0x03030069>;	/* LEFT */
+		};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <16>;
+	phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rmii";
+};
+
+&phy_sel {
+	rmii-clock-ext;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	tps65218: tps65218@24 {
+		reg = <0x24>;
+		compatible = "ti,tps65218";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			compatible = "ti,tps65218-dcdc1";
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			compatible = "ti,tps65218-dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			compatible = "ti,tps65218-dcdc3";
+			regulator-name = "vdcdc3";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,tps65218-ldo1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	at24@50 {
+		compatible = "at24,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pixcir_ts_pins>;
+		reg = <0x5c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 0>;
+
+		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
+	nand@0,0 {
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;  /* cs-on-ns */
+		gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
+		gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
+		gpmc,we-on-ns = <0>;   /* cs-on-ns */
+		gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
+		gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
+		gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
+		gpmc,access-ns = <30>; /* tCEA + 4*/
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,wait-pin = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000C0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002C0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&ecap0 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&qspi {
+	status = "disabled";	/* Disable GPMC (NAND) when enabling QSPI */
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_default>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "mx66l51235l";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first 512KiB
+		 * for a valid file to boot(XIP).
+		 */
+		partition@0 {
+			label = "QSPI.U_BOOT";
+			reg = <0x00000000 0x000080000>;
+		};
+		partition@1 {
+			label = "QSPI.U_BOOT.backup";
+			reg = <0x00080000 0x00080000>;
+		};
+		partition@2 {
+			label = "QSPI.U-BOOT-SPL_OS";
+			reg = <0x00100000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.U_BOOT_ENV";
+			reg = <0x00110000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.U-BOOT-ENV.backup";
+			reg = <0x00120000 0x00010000>;
+		};
+		partition@5 {
+			label = "QSPI.KERNEL";
+			reg = <0x00130000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.FILESYSTEM";
+			reg = <0x00930000 0x36D0000>;
+		};
+	};
+};
+
+&hdq {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdq_pins>;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	port {
+		vpfe1_ep: endpoint {
+			/* remote-endpoint = <&sensor>; add once we have it */
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
diff --git a/src/arm/am43xx-clocks.dtsi b/src/arm/am43xx-clocks.dtsi
new file mode 100644
index 000000000000..c7dc9dab93a4
--- /dev/null
+++ b/src/arm/am43xx-clocks.dtsi
@@ -0,0 +1,757 @@
+/*
+ * Device Tree Source for AM43xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm_clocks {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0040>;
+	};
+
+	crystal_freq_sel_ck: crystal_freq_sel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0040>;
+	};
+
+	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm3_tbclk: ehrpwm3_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm4_tbclk: ehrpwm4_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm5_tbclk: ehrpwm5_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m2_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0664>;
+	};
+};
+&prcm_clocks {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d3c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d40>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2da0>, <0x2da4>, <0x2dac>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e30>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		ti,set-rate-parent;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2de0>, <0x2de4>, <0x2dec>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2df0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	clkdiv32k_ick: clkdiv32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a38>;
+	};
+
+	sysclk_div: sysclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
+		reg = <0x4248>;
+	};
+
+	clk_32k_tpm_ck: clk_32k_tpm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4200>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4204>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4208>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x420c>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4210>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4214>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4218>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		reg = <0x422c>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
+		reg = <0x4238>;
+	};
+
+	clk_32k_mosc_ck: clk_32k_mosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4240>;
+	};
+
+	gpio0_dbclk: gpio0_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&gpio0_dbclk_mux_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2b68>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c78>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c80>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c88>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c90>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c98>;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x423c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x423c>;
+		ti,max-div = <2>;
+	};
+
+	disp_clk: disp_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x4244>;
+		ti,set-rate-parent;
+	};
+
+	dpll_extdev_ck: dpll_extdev_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+	};
+
+	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_extdev_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mux_synctimer32k_ck: mux_synctimer32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
+		reg = <0x4230>;
+	};
+
+	synctimer_32kclk: synctimer_32kclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&mux_synctimer32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a30>;
+	};
+
+	timer8_fck: timer8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x421c>;
+	};
+
+	timer9_fck: timer9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4220>;
+	};
+
+	timer10_fck: timer10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4224>;
+	};
+
+	timer11_fck: timer11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4228>;
+	};
+
+	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpsw_50m_clkdiv>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_per_ck>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e14>;
+		ti,invert-autoidle-bit;
+	};
+
+	dll_aging_clk_div: dll_aging_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x4250>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	div_core_25m_ck: div_core_25m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_12m_clk: func_12m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	vtp_clk_div: vtp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4260>;
+	};
+
+	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a40>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a48>;
+	};
+
+	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x8a60>;
+	};
+
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x8a68>;
+	};
+};
diff --git a/src/arm/am57xx-beagle-x15.dts b/src/arm/am57xx-beagle-x15.dts
new file mode 100644
index 000000000000..03750af3b49a
--- /dev/null
+++ b/src/arm/am57xx-beagle-x15.dts
@@ -0,0 +1,562 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM5728 BeagleBoard-X15";
+	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &mcp_rtc;
+		rtc1 = &tps659038_rtc;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&regen1>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&smps3_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		led@0 {
+			label = "beagle-x15:usr0";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "beagle-x15:usr1";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "beagle-x15:usr2";
+			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beagle-x15:usr3";
+			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ide-disk";
+			default-state = "off";
+		};
+	};
+
+	gpio_fan: gpio_fan {
+		/* Based on 5v 500mA AFB02505HHB */
+		compatible = "gpio-fan";
+		gpios =  <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0>,
+				     <13000 1>;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&extcon_usb1_pins>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&extcon_usb2_pins>;
+	};
+};
+
+&dra7_pmx_core {
+	leds_pins_default: leds_pins_default {
+		pinctrl-single,pins = <
+			0x3a8 (PIN_OUTPUT | MUX_MODE14)	/* spi1_d1.gpio7_8 */
+			0x3ac (PIN_OUTPUT | MUX_MODE14)	/* spi1_d0.gpio7_9 */
+			0x3c0 (PIN_OUTPUT | MUX_MODE14)	/* spi2_sclk.gpio7_14 */
+			0x3c4 (PIN_OUTPUT | MUX_MODE14)	/* spi2_d1.gpio7_15 */
+		>;
+	};
+
+	i2c1_pins_default: i2c1_pins_default {
+		pinctrl-single,pins = <
+			0x400 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
+			0x404 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
+		>;
+	};
+
+	i2c3_pins_default: i2c3_pins_default {
+		pinctrl-single,pins = <
+			0x2a4 (PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
+			0x2a8 (PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
+		>;
+	};
+
+	uart3_pins_default: uart3_pins_default {
+		pinctrl-single,pins = <
+			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
+			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+		>;
+	};
+
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			0x36c (PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
+			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
+			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
+			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
+			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
+			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
+			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
+			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
+			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
+			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
+			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
+			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
+
+			/* Slave 2 */
+			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
+			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
+			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
+			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
+			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
+			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
+			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
+			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
+			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
+			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
+			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
+			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
+		>;
+
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_INPUT | MUX_MODE15)
+			0x254 (PIN_INPUT | MUX_MODE15)
+			0x258 (PIN_INPUT | MUX_MODE15)
+			0x25c (PIN_INPUT | MUX_MODE15)
+			0x260 (PIN_INPUT | MUX_MODE15)
+			0x264 (PIN_INPUT | MUX_MODE15)
+			0x268 (PIN_INPUT | MUX_MODE15)
+			0x26c (PIN_INPUT | MUX_MODE15)
+			0x270 (PIN_INPUT | MUX_MODE15)
+			0x274 (PIN_INPUT | MUX_MODE15)
+			0x278 (PIN_INPUT | MUX_MODE15)
+			0x27c (PIN_INPUT | MUX_MODE15)
+
+			/* Slave 2 */
+			0x198 (PIN_INPUT | MUX_MODE15)
+			0x19c (PIN_INPUT | MUX_MODE15)
+			0x1a0 (PIN_INPUT | MUX_MODE15)
+			0x1a4 (PIN_INPUT | MUX_MODE15)
+			0x1a8 (PIN_INPUT | MUX_MODE15)
+			0x1ac (PIN_INPUT | MUX_MODE15)
+			0x1b0 (PIN_INPUT | MUX_MODE15)
+			0x1b4 (PIN_INPUT | MUX_MODE15)
+			0x1b8 (PIN_INPUT | MUX_MODE15)
+			0x1bc (PIN_INPUT | MUX_MODE15)
+			0x1c0 (PIN_INPUT | MUX_MODE15)
+			0x1c4 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
+			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			0x23c (PIN_INPUT | MUX_MODE15)
+			0x240 (PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	tps659038_pins_default: tps659038_pins_default {
+		pinctrl-single,pins = <
+			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
+		>;
+	};
+
+	tmp102_pins_default: tmp102_pins_default {
+		pinctrl-single,pins = <
+			0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14)	/* spi2_d0.gpio7_16 */
+		>;
+	};
+
+	mcp79410_pins_default: mcp79410_pins_default {
+		pinctrl-single,pins = <
+			0x424 (PIN_INPUT_PULLUP | MUX_MODE1)	/* wakeup3.sys_nirq1 */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+		>;
+	};
+
+	extcon_usb1_pins: extcon_usb1_pins {
+		pinctrl-single,pins = <
+			0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
+		>;
+	};
+
+	extcon_usb2_pins: extcon_usb2_pins {
+		pinctrl-single,pins = <
+			0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_default>;
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps659038_pins_default>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_CORE */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1030000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS7 unused */
+
+				smps8_reg: smps8 {
+					/* VDD_1V8 */
+					regulator-name = "smps8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS9 unused */
+
+				ldo1_reg: ldo1 {
+					/* VDD_SD  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_SHV5 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHY */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	tmp102: tmp102@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tmp102_pins_default>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_default>;
+	clock-frequency = <400000>;
+
+	mcp_rtc: rtc@6f {
+		compatible = "microchip,mcp7941x";
+		reg = <0x6f>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>;  /* IRQ_SYS_1N */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcp79410_pins_default>;
+
+		vcc-supply = <&vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&gpio7 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps12_reg>;
+	voltage-tolerance = <1>;
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x248>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	vmmc-supply = <&ldo1_reg>;
+	vmmc_aux-supply = <&vdd_3v3>;
+	pbias-supply = <&pbias_mmc_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+};
+
+&mmc2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&vdd_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+	cap-mmc-dual-data-rate;
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	dr_mode = "peripheral";
+};
diff --git a/src/arm/arm-realview-pb1176.dts b/src/arm/arm-realview-pb1176.dts
new file mode 100644
index 000000000000..ff26c7ed8c41
--- /dev/null
+++ b/src/arm/arm-realview-pb1176.dts
@@ -0,0 +1,412 @@
+/*
+ * Copyright 2014 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+	model = "ARM RealView PB1176";
+	compatible = "arm,realview-pb1176";
+
+	chosen { };
+
+	aliases {
+		serial0 = &pb1176_serial0;
+		serial1 = &pb1176_serial1;
+		serial2 = &pb1176_serial2;
+		serial3 = &pb1176_serial3;
+		serial4 = &fpga_serial;
+	};
+
+	memory {
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb1176-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-pb1176-syscon", "syscon";
+			reg = <0x10000000 0x1000>;
+
+			led@08.0 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@08.1 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@08.2 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@08.3 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@08.4 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@08.5 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@08.6 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@08.7 {
+				compatible = "register-bit-led";
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+		};
+
+		/* Primary DevChip GIC synthesized with the CPU */
+		intc_dc1176: interrupt-controller@10120000 {
+			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10121000 0x1000>,
+			      <0x10120000 0x100>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,l220-cache";
+			reg = <0x10110000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			/*
+			 * Override default cache size, sets and
+			 * associativity as these may be erroneously set
+			 * up by boot loader(s).
+			 */
+			arm,override-auxreg;
+			cache-size = <131072>; // 128kB
+			cache-sets = <512>;
+			cache-line-size = <32>;
+		};
+
+		pmu {
+			compatible = "arm,arm1176-pmu";
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer01: timer@10104000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10104000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer23: timer@10105000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10105000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		pb1176_rtc: rtc@10108000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10108000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pb1176_gpio0: gpio@1010a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x1010a000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pb1176_ssp: ssp@1010b000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1010b000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		pb1176_serial0: serial@1010c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010c000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial1: serial@1010d000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010d000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial2: serial@1010e000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010e000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb1176_serial3: serial@1010f000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1010f000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+	};
+
+	/* These peripherals are inside the FPGA rather than the DevChip */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		fpga_mci: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>,
+					<0 2 IRQ_TYPE_LEVEL_HIGH>;
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		fpga_kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		fpga_kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		fpga_charlcd: charlcd@10008000 {
+			compatible = "arm,versatile-lcd";
+			reg = <0x10008000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_serial: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		/* This GIC on the board is cascaded off the DevChip GIC */
+		intc_fpga1176: interrupt-controller@10040000 {
+			compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		fpga_gpio0: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_gpio1: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		fpga_rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+
+	};
+};
diff --git a/src/arm/armada-370-db.dts b/src/arm/armada-370-db.dts
new file mode 100644
index 000000000000..e993c46bd472
--- /dev/null
+++ b/src/arm/armada-370-db.dts
@@ -0,0 +1,239 @@
+/*
+ * Device Tree file for Marvell Armada 370 evaluation board
+ * (DB-88F6710-BP-DDR3)
+ *
+ *  Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-370.dtsi"
+
+/ {
+	model = "Marvell Armada 370 Evaluation Board";
+	compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+				status = "okay";
+				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
+			};
+
+			audio-controller@30000 {
+				pinctrl-0 = <&i2s_pins2>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				/*
+				 * This device is disabled by default, because
+				 * using the SD card connector requires
+				 * changing the default CON40 connector
+				 * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
+				 * different connector
+				 * "DB-88F6710_MPP_RGMII_SD_Jumper".
+				 */
+				status = "disabled";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			spi0: spi@10600 {
+				pinctrl-0 = <&spi0_pins2>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "mx25l25635e";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <50000000>;
+				};
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * both standard PCIe slots and mini-PCIe
+			 * slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 370 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1L", "In Jack";
+		status = "okay";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+};
diff --git a/src/arm/armada-370-mirabox.dts b/src/arm/armada-370-mirabox.dts
new file mode 100644
index 000000000000..b10ceb488efe
--- /dev/null
+++ b/src/arm/armada-370-mirabox.dts
@@ -0,0 +1,206 @@
+/*
+ * Device Tree file for Globalscale Mirabox
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Globalscale Mirabox";
+	compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected on the PCB to a USB 3.0 XHCI controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			timer@20300 {
+				clock-frequency = <600000000>;
+				status = "okay";
+			};
+
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
+
+				green_pwr_led {
+					label = "mirabox:green:pwr";
+					gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+
+				blue_stat_led {
+					label = "mirabox:blue:stat";
+					gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				green_stat_led {
+					label = "mirabox:green:stat";
+					gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+			};
+
+			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins3>;
+				pinctrl-names = "default";
+				status = "okay";
+				/*
+				 * No CD or WP GPIOs: SDIO interface used for
+				 * Wifi/Bluetooth chip
+				 */
+				 broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pca9505: pca9505@25 {
+					compatible = "nxp,pca9505";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x25>;
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x400000>;
+				};
+				partition@400000 {
+					label = "Linux";
+					reg = <0x400000 0x400000>;
+				};
+				partition@800000 {
+					label = "Filesystem";
+					reg = <0x800000 0x3f800000>;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pwr_led_pin: pwr-led-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpo";
+	};
+
+	stat_led_pins: stat-led-pins {
+		marvell,pins = "mpp64", "mpp65";
+		marvell,function = "gpio";
+	};
+};
+
diff --git a/src/arm/armada-370-netgear-rn102.dts b/src/arm/armada-370-netgear-rn102.dts
new file mode 100644
index 000000000000..3f8cc3845a5e
--- /dev/null
+++ b/src/arm/armada-370-netgear-rn102.dts
@@ -0,0 +1,293 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 102
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 102";
+	compatible = "netgear,readynas-102", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to Marvell 88SE9170 SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* eSATA interface */
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+					reg = <0>;
+				};
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				clock-frequency = <100000>;
+				status = "okay";
+
+				isl12057: isl12057@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					isil,irq2-can-wakeup-machine;
+				};
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				/* Use Hardware BCH ECC */
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0000000 0x180000>;  /* 1.5MB */
+					read-only;
+				};
+
+				partition@180000 {
+					label = "u-boot-env";
+					reg = <0x180000 0x20000>;    /* 128KB */
+					read-only;
+				};
+
+				partition@200000 {
+					label = "uImage";
+					reg = <0x0200000 0x600000>;    /* 6MB */
+				};
+
+				partition@800000 {
+					label = "minirootfs";
+					reg = <0x0800000 0x400000>;    /* 4MB */
+				};
+
+				/* Last MB is for the BBT, i.e. not writable */
+				partition@c00000 {
+					label = "ubifs";
+					reg = <0x0c00000 0x7400000>; /* 116MB */
+				};
+			};
+		};
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <8192>;
+	       };
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&power_led_pin
+			     &sata1_led_pin
+			     &sata2_led_pin
+			     &backup_led_pin>;
+		pinctrl-names = "default";
+
+		blue-power-led {
+			label = "rn102:blue:pwr";
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		blue-sata1-led {
+			label = "rn102:blue:sata1";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		blue-sata2-led {
+			label = "rn102:blue:sata2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		blue-backup-led {
+			label = "rn102:blue:backup";
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin
+			     &reset_button_pin
+			     &backup_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+
+	sata1_led_pin: sata1-led-pin {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+
+	sata2_led_pin: sata2-led-pin {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp6";
+		marvell,function = "gpio";
+	};
+
+	poweroff: poweroff {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+};
diff --git a/src/arm/armada-370-netgear-rn104.dts b/src/arm/armada-370-netgear-rn104.dts
new file mode 100644
index 000000000000..99eb8a014ac6
--- /dev/null
+++ b/src/arm/armada-370-netgear-rn104.dts
@@ -0,0 +1,305 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 104
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 104";
+	compatible = "netgear,readynas-104", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to FL1009 USB 3.0 controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to Marvell 88SE9215 SATA controller */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				clock-frequency = <100000>;
+				status = "okay";
+
+				isl12057: isl12057@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					isil,irq2-can-wakeup-machine;
+				};
+
+				g762: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				pca9554: pca9554@23 {
+					compatible = "nxp,pca9554";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x23>;
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				/* Use Hardware BCH ECC */
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0000000 0x180000>;  /* 1.5MB */
+					read-only;
+				};
+
+				partition@180000 {
+					label = "u-boot-env";
+					reg = <0x180000 0x20000>;    /* 128KB */
+					read-only;
+				};
+
+				partition@200000 {
+					label = "uImage";
+					reg = <0x0200000 0x600000>;    /* 6MB */
+				};
+
+				partition@800000 {
+					label = "minirootfs";
+					reg = <0x0800000 0x400000>;    /* 4MB */
+				};
+
+				/* Last MB is for the BBT, i.e. not writable */
+				partition@c00000 {
+					label = "ubifs";
+					reg = <0x0c00000 0x7400000>; /* 116MB */
+				};
+			};
+		};
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <8192>;
+	       };
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&backup_led_pin &power_led_pin>;
+		pinctrl-names = "default";
+
+		blue-backup-led {
+			label = "rn104:blue:backup";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue-power-led {
+			label = "rn104:blue:pwr";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "keep";
+		};
+
+		blue-sata1-led {
+			label = "rn104:blue:sata1";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata2-led {
+			label = "rn104:blue:sata2";
+			gpios = <&pca9554 1 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata3-led {
+			label = "rn104:blue:sata3";
+			gpios = <&pca9554 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-sata4-led {
+			label = "rn104:blue:sata4";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&backup_button_pin
+			     &power_button_pin
+			     &reset_button_pin>;
+		pinctrl-names = "default";
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	poweroff: poweroff {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpo";
+	};
+
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+};
diff --git a/src/arm/armada-370-rd.dts b/src/arm/armada-370-rd.dts
new file mode 100644
index 000000000000..6ae36a38beb2
--- /dev/null
+++ b/src/arm/armada-370-rd.dts
@@ -0,0 +1,249 @@
+/*
+ * Device Tree file for Marvell Armada 370 Reference Design board
+ * (RD-88F6710-A1)
+ *
+ *  Copied from arch/arm/boot/dts/armada-370-db.dts
+ *
+ *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Marvell Armada 370 Reference Design";
+	compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Internal mini-PCIe connector */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy-mode = "rgmii-id";
+				fixed-link {
+					   speed = <1000>;
+					   full-duplex;
+				};
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins1>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			gpio-keys {
+				compatible = "gpio-keys";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				button@1 {
+					label = "Software Button";
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			gpio-fan {
+				compatible = "gpio-fan";
+				gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+				gpio-fan,speed-map = <0 0 3000 1>;
+				pinctrl-0 = <&fan_pins>;
+				pinctrl-names = "default";
+			};
+
+			gpio_leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&led_pins>;
+
+				sw_led {
+					label = "370rd:green:sw";
+					gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
+		};
+	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth1>;
+		dsa,mii-bus = <&mdio>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x10 0>;	/* MDIO address 16, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan1";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan2";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan3";
+			};
+
+			port@5 {
+			      reg = <5>;
+			      label = "cpu";
+			};
+		};
+	 };
+ };
+
+&pinctrl {
+	fan_pins: fan-pins {
+		marvell,pins = "mpp8";
+		marvell,function = "gpio";
+	};
+
+	led_pins: led-pins {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
diff --git a/src/arm/armada-370-synology-ds213j.dts b/src/arm/armada-370-synology-ds213j.dts
new file mode 100644
index 000000000000..59f74e66963f
--- /dev/null
+++ b/src/arm/armada-370-synology-ds213j.dts
@@ -0,0 +1,349 @@
+/*
+ * Device Tree file for Synology DS213j
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "Synology DS213j";
+	compatible = "synology,ds213j", "marvell,armada370",
+		     "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+
+			/* RTC provided by Seiko S-35390A I2C RTC chip below */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "micron,n25q064";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <20000000>;
+
+					/*
+					 * Warning!
+					 *
+					 * Synology u-boot uses its compiled-in environment
+					 * and it seems Synology did not care to change u-boot
+					 * default configuration in order to allow saving a
+					 * modified environment at a sensible location. So,
+					 * if you do a 'saveenv' under u-boot, your modified
+					 * environment will be saved at 1MB after the start
+					 * of the flash, i.e. in the middle of the uImage.
+					 * For that reason, it is strongly advised not to
+					 * change the default environment, unless you know
+					 * what you are doing.
+					 */
+					partition@00000000 { /* u-boot */
+						label = "RedBoot";
+						reg = <0x00000000 0x000c0000>; /* 768KB */
+					};
+
+					partition@000c0000 { /* uImage */
+						label = "zImage";
+						reg = <0x000c0000 0x002d0000>; /* 2880KB */
+					};
+
+					partition@00390000 { /* uInitramfs */
+						label = "rd.gz";
+						reg = <0x00390000 0x00440000>; /* 4250KB */
+					};
+
+					partition@007d0000 { /* MAC address and serial number */
+						label = "vendor";
+						reg = <0x007d0000 0x00010000>; /* 64KB */
+					};
+
+					partition@007e0000 {
+						label = "RedBoot config";
+						reg = <0x007e0000 0x00010000>; /* 64KB */
+					};
+
+					partition@007f0000 {
+						label = "FIS directory";
+						reg = <0x007f0000 0x00010000>; /* 64KB */
+					};
+				};
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <400000>;
+				status = "okay";
+
+				/* Main device RTC chip */
+				s35390a: s35390a@30 {
+					 compatible = "sii,s35390a";
+					 reg = <0x30>;
+				};
+			};
+
+			/* Connected to a header on device's PCB */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Connected to a TI MSP430F2111 for power control */
+			serial@12100 {
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			/* rear USB port, near reset button */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* rear USB port, near RJ45 port */
+			usb@51000 {
+				status = "okay";
+			};
+
+			mdio {
+				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+			       status = "okay";
+			       phy = <&phy1>;
+			       phy-mode = "sgmii";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-fan-32-38 {
+		status = "okay";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
+			     &fan_ctrl_high_pin &fan_alarm_pin>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
+			 &gpio2  0 GPIO_ACTIVE_HIGH
+			 &gpio2  1 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       1000 1
+				       1150 2
+				       1350 4
+				       1500 3
+				       1650 5
+				       1750 6
+				       1900 7 >;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&disk1_led_pin
+			     &disk2_led_pin>;
+		pinctrl-names = "default";
+
+		disk1-led-amber {
+			label = "synology:amber:disk1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		disk2-led-amber {
+			label = "synology:amber:disk2";
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
+		pinctrl-names = "default";
+
+		sata1_regulator: sata1-regulator {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_regulator: sata2-regulator {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA2 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	disk1_led_pin: disk1-led-pin {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	disk2_led_pin: disk2-led-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	sata1_pwr_pin: sata1-pwr-pin {
+		marvell,pins = "mpp37";
+		marvell,function = "gpio";
+	};
+
+	sata2_pwr_pin: sata2-pwr-pin {
+		marvell,pins = "mpp62";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit0_pin: syno-id-bit0-pin {
+		marvell,pins = "mpp55";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit1_pin: syno-id-bit1-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit2_pin: syno-id-bit2-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit3_pin: syno-id-bit3-pin {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_low_pin: fan-ctrl-low-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_mid_pin: fan-ctrl-mid-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+
+	fan_ctrl_high_pin: fan-ctrl-high-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpo";
+	};
+
+	fan_alarm_pin: fan-alarm-pin {
+		marvell,pins = "mpp38";
+		marvell,function = "gpio";
+	};
+};
diff --git a/src/arm/armada-370-xp.dtsi b/src/arm/armada-370-xp.dtsi
new file mode 100644
index 000000000000..8a322ad57e5f
--- /dev/null
+++ b/src/arm/armada-370-xp.dtsi
@@ -0,0 +1,332 @@
+/*
+ * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * This file contains the definitions that are common to the Armada
+ * 370 and Armada XP SoC.
+ */
+
+/include/ "skeleton64.dtsi"
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 370 and XP SoC";
+	compatible = "marvell,armada-370-xp";
+
+	aliases {
+		eth0 = &eth0;
+		eth1 = &eth1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "marvell,sheeva-v7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&mpic>;
+		pcie-mem-aperture = <0xf8000000 0x7e00000>;
+		pcie-io-aperture  = <0xffe00000 0x100000>;
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <50>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+				reg = <0x10600 0x28>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <30>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+				reg = <0x10680 0x28>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <92>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <31>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <32>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <41>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <42>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl: pin-ctrl@18000 {
+				reg = <0x18000 0x38>;
+			};
+
+			coredivclk: corediv-clock@18740 {
+				compatible = "marvell,armada-370-corediv-clock";
+				reg = <0x18740 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>,
+				      <0x20250 0x8>;
+			};
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+			};
+
+			coherency-fabric@20200 {
+				compatible = "marvell,coherency-fabric";
+				reg = <0x20200 0xb0>, <0x21010 0x1c>;
+			};
+
+			timer@20300 {
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
+			};
+
+			watchdog@20300 {
+				reg = <0x20300 0x34>, <0x20704 0x4>;
+			};
+
+			pmsu@22000 {
+				compatible = "marvell,armada-370-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <45>;
+				status = "disabled";
+			};
+
+			usb@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x500>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts = <8>;
+				clocks = <&gateclk 4>;
+				status = "disabled";
+			};
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
+			};
+
+			eth1: ethernet@74000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x74000 0x4000>;
+				interrupts = <10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			sata@a0000 {
+				compatible = "marvell,armada-370-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <55>;
+				clocks = <&gateclk 15>, <&gateclk 30>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
+
+			nand@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <113>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <54>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
+		};
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+	};
+ };
diff --git a/src/arm/armada-370.dtsi b/src/arm/armada-370.dtsi
new file mode 100644
index 000000000000..27397f151def
--- /dev/null
+++ b/src/arm/armada-370.dtsi
@@ -0,0 +1,399 @@
+/*
+ * Device Tree Include file for Marvell Armada 370 family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the Armada 370 SoC that are not
+ * common to all Armada SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Marvell Armada 370 family SoC";
+	compatible = "marvell,armada370", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+                                          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			L2: l2-cache {
+				compatible = "marvell,aurora-outer-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-unified;
+				wt-override;
+			};
+
+			/*
+			 * Default SPI pinctrl setting, can be overwritten on
+			 * board level if a different configuration is used.
+			 */
+			spi0: spi@10600 {
+				pinctrl-0 = <&spi0_pins1>;
+				pinctrl-names = "default";
+			};
+
+			spi1: spi@10680 {
+				pinctrl-0 = <&spi1_pins>;
+				pinctrl-names = "default";
+			};
+
+			i2c0: i2c@11000 {
+				reg = <0x11000 0x20>;
+			};
+
+			i2c1: i2c@11100 {
+				reg = <0x11100 0x20>;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			/*
+			 * Default UART pinctrl setting without RTS/CTS, can
+			 * be overwritten on board level if a different
+			 * configuration is used.
+			 */
+			uart0: serial@12000 {
+				pinctrl-0 = <&uart0_pins>;
+				pinctrl-names = "default";
+			};
+
+			uart1: serial@12100 {
+				pinctrl-0 = <&uart1_pins>;
+				pinctrl-names = "default";
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-370-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-370-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
+
+			thermal@18300 {
+				compatible = "marvell,armada370-thermal";
+				reg = <0x18300 0x4
+					0x18304 0x4>;
+				status = "okay";
+			};
+
+			sscg@18330 {
+				reg = <0x18330 0x4>;
+			};
+
+			interrupt-controller@20000 {
+				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-370-timer";
+				clocks = <&coreclk 2>;
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-370-wdt";
+				clocks = <&coreclk 2>;
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x8>;
+			};
+
+			audio_controller: audio-controller@30000 {
+				#sound-dai-cells = <1>;
+				compatible = "marvell,armada370-audio";
+				reg = <0x30000 0x4000>;
+				interrupts = <93>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			usb@50000 {
+				clocks = <&coreclk 0>;
+			};
+
+			usb@51000 {
+				clocks = <&coreclk 0>;
+			};
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv88f6710-pinctrl";
+
+	spi0_pins1: spi0-pins1 {
+		marvell,pins = "mpp33", "mpp34",
+			       "mpp35", "mpp36";
+		marvell,function = "spi0";
+	};
+
+	spi0_pins2: spi0_pins2 {
+		marvell,pins = "mpp32", "mpp63",
+			       "mpp64", "mpp65";
+		marvell,function = "spi0";
+	};
+
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp49", "mpp50",
+			       "mpp51", "mpp52";
+		marvell,function = "spi1";
+	};
+
+	uart0_pins: uart0-pins {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "uart0";
+	};
+
+	uart1_pins: uart1-pins {
+		marvell,pins = "mpp41", "mpp42";
+		marvell,function = "uart1";
+	};
+
+	sdio_pins1: sdio-pins1 {
+		marvell,pins = "mpp9",  "mpp11", "mpp12",
+				"mpp13", "mpp14", "mpp15";
+		marvell,function = "sd0";
+	};
+
+	sdio_pins2: sdio-pins2 {
+		marvell,pins = "mpp47", "mpp48", "mpp49",
+				"mpp50", "mpp51", "mpp52";
+		marvell,function = "sd0";
+	};
+
+	sdio_pins3: sdio-pins3 {
+		marvell,pins = "mpp48", "mpp49", "mpp50",
+				"mpp51", "mpp52", "mpp53";
+		marvell,function = "sd0";
+	};
+
+	i2c0_pins: i2c0-pins {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "i2c0";
+	};
+
+	i2s_pins1: i2s-pins1 {
+		marvell,pins = "mpp5", "mpp6", "mpp7",
+			       "mpp8", "mpp9", "mpp10",
+			       "mpp12", "mpp13";
+		marvell,function = "audio";
+	};
+
+	i2s_pins2: i2s-pins2 {
+		marvell,pins = "mpp49", "mpp47", "mpp50",
+			       "mpp59", "mpp57", "mpp61",
+			       "mpp62", "mpp60", "mpp58";
+		marvell,function = "audio";
+	};
+
+	mdio_pins: mdio-pins {
+		marvell,pins = "mpp17", "mpp18";
+		marvell,function = "ge";
+	};
+
+	ge0_rgmii_pins: ge0-rgmii-pins {
+		marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
+			       "mpp9", "mpp10", "mpp11", "mpp12",
+			       "mpp13", "mpp14", "mpp15", "mpp16";
+		marvell,function = "ge0";
+	};
+
+	ge1_rgmii_pins: ge1-rgmii-pins {
+		marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
+			       "mpp23", "mpp24", "mpp25", "mpp26",
+			       "mpp27", "mpp28", "mpp29", "mpp30";
+		marvell,function = "ge1";
+	};
+};
diff --git a/src/arm/armada-375-db.dts b/src/arm/armada-375-db.dts
new file mode 100644
index 000000000000..0440891425c0
--- /dev/null
+++ b/src/arm/armada-375-db.dts
@@ -0,0 +1,204 @@
+/*
+ * Device Tree file for Marvell Armada 375 evaluation board
+ * (DB-88F6720)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-375.dtsi"
+
+/ {
+	model = "Marvell Armada 375 Development Board";
+	compatible = "marvell,a375-db", "marvell,armada375";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				pinctrl-0 = <&spi0_pins>;
+				pinctrl-names = "default";
+				/*
+				 * SPI conflicts with NAND, so we disable it
+				 * here, and select NAND as the enabled device
+				 * by default.
+				 */
+				status = "disabled";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			pinctrl {
+				sdio_st_pins: sdio-st-pins {
+					marvell,pins = "mpp44", "mpp45";
+					marvell,function = "gpio";
+				};
+			};
+
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+
+			nand: nand@d0000 {
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
+
+			usb@54000 {
+				status = "okay";
+			};
+
+			usb3@58000 {
+				status = "okay";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+				wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+			};
+
+			ethernet@f0000 {
+				status = "okay";
+
+				eth0@c4000 {
+					status = "okay";
+					phy = <&phy0>;
+					phy-mode = "rgmii-id";
+				};
+
+				eth1@c5000 {
+					status = "okay";
+					phy = <&phy3>;
+					phy-mode = "gmii";
+				};
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-375.dtsi b/src/arm/armada-375.dtsi
new file mode 100644
index 000000000000..ba3c57e0af72
--- /dev/null
+++ b/src/arm/armada-375.dtsi
@@ -0,0 +1,612 @@
+/*
+ * Device Tree Include file for Marvell Armada 375 family SoC
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 375 family SoC";
+	compatible = "marvell,armada375";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-375-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		compatible = "marvell,armada375-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0xc0054 0x4>;
+				clocks = <&gateclk 19>;
+			};
+
+			/* Network controller */
+			ethernet@f0000 {
+				compatible = "marvell,armada-375-pp2";
+				reg = <0xf0000 0xa000>, /* Packet Processor regs */
+				      <0xc0000 0x3060>, /* LMS regs */
+				      <0xc4000 0x100>,  /* eth0 regs */
+				      <0xc5000 0x100>;  /* eth1 regs */
+				clocks = <&gateclk 3>, <&gateclk 19>;
+				clock-names = "pp_clk", "gop_clk";
+				status = "disabled";
+
+				eth0: eth0@c4000 {
+					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <0>;
+					status = "disabled";
+				};
+
+				eth1: eth1@c5000 {
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					port-id = <1>;
+					status = "disabled";
+				};
+			};
+
+			rtc@10300 {
+				compatible = "marvell,orion-rtc";
+				reg = <0x10300 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl {
+				compatible = "marvell,mv88f6720-pinctrl";
+				reg = <0x18000 0x24>;
+
+				i2c0_pins: i2c0-pins {
+					marvell,pins = "mpp14",  "mpp15";
+					marvell,function = "i2c0";
+				};
+
+				i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp61",  "mpp62";
+					marvell,function = "i2c1";
+				};
+
+				nand_pins: nand-pins {
+					marvell,pins = "mpp0", "mpp1", "mpp2",
+						"mpp3", "mpp4", "mpp5",
+						"mpp6", "mpp7", "mpp8",
+						"mpp9", "mpp10", "mpp11",
+						"mpp12", "mpp13";
+					marvell,function = "nand";
+				};
+
+				sdio_pins: sdio-pins {
+					marvell,pins = "mpp24",  "mpp25", "mpp26",
+						     "mpp27", "mpp28", "mpp29";
+					marvell,function = "sd";
+				};
+
+				spi0_pins: spi0-pins {
+					marvell,pins = "mpp0",  "mpp1", "mpp4",
+						     "mpp5", "mpp8", "mpp9";
+					marvell,function = "spi0";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-375-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-375-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			usbcluster: usb-cluster@18400 {
+				compatible = "marvell,armada-375-usb-cluster";
+				reg = <0x18400 0x4>;
+				#phy-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 0>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-375-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
+				clocks = <&coreclk 0>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-375-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x500>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				phys = <&usbcluster PHY_TYPE_USB2>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			usb@54000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x54000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			usb3@58000 {
+				compatible = "marvell,armada-375-xhci";
+				reg = <0x58000 0x20000>,<0x5b880 0x80>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 16>;
+				phys = <&usbcluster PHY_TYPE_USB3>;
+				phy-names = "usb";
+				status = "disabled";
+			};
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60A00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 23>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			sata@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x5000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 14>, <&gateclk 20>;
+				clock-names = "0", "1";
+				status = "disabled";
+			};
+
+			nand@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			mvsdio@d4000 {
+				compatible = "marvell,orion-sdio";
+				reg = <0xd4000 0x200>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 17>;
+				bus-width = <4>;
+				cap-sdio-irq;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				status = "disabled";
+			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada375-thermal";
+				reg = <0xe8078 0x4>, <0xe807c 0x8>;
+				status = "okay";
+			};
+
+			coreclk: mvebu-sar@e8204 {
+				compatible = "marvell,armada-375-core-clock";
+				reg = <0xe8204 0x04>;
+				#clock-cells = <1>;
+			};
+
+			coredivclk: corediv-clock@e8250 {
+				compatible = "marvell,armada-375-corediv-clock";
+				reg = <0xe8250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
diff --git a/src/arm/armada-380.dtsi b/src/arm/armada-380.dtsi
new file mode 100644
index 000000000000..5102d19cc8f4
--- /dev/null
+++ b/src/arm/armada-380.dtsi
@@ -0,0 +1,152 @@
+/*
+ * Device Tree Include file for Marvell Armada 380 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 380 family SoC";
+	compatible = "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6810-pinctrl";
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
+
+			/* x1 port */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-385-db-ap.dts b/src/arm/armada-385-db-ap.dts
new file mode 100644
index 000000000000..57b9119fb3e0
--- /dev/null
+++ b/src/arm/armada-385-db-ap.dts
@@ -0,0 +1,178 @@
+/*
+ * Device Tree file for Marvell Armada 385 Access Point Development board
+ * (DB-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Nadav Haklai <nadavh@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 Access Point Development Board";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi1: spi@10680 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins>;
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <54000000>;
+				};
+			};
+
+			i2c0: i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+
+				/*
+				 * This bus is wired to two EEPROM
+				 * sockets, one of which holding the
+				 * board ID used by the	bootloader.
+				 * Erasing this EEPROM's content will
+				 * brick the board.
+				 * Use this bus with caution.
+				 */
+			};
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@4 {
+					reg = <4>;
+				};
+
+				phy2: ethernet-phy@6 {
+					reg = <6>;
+				};
+			};
+
+			/* UART0 is exposed through the JP8 connector */
+			uart0: serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			/*
+			 * UART1 is exposed through a FTDI chip
+			 * wired to the mini-USB connector
+			 */
+			uart1: serial@12100 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+			};
+
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+			};
+
+			ethernet@70000 {
+				pinctrl-names = "default";
+
+				/*
+				 * The Reference Clock 0 is used to
+				 * provide a clock to the PHY
+				 */
+				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The three PCIe units are accessible through
+			 * standard mini-PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-385.dtsi b/src/arm/armada-385.dtsi
new file mode 100644
index 000000000000..8e67d2c083dd
--- /dev/null
+++ b/src/arm/armada-385.dtsi
@@ -0,0 +1,184 @@
+/*
+ * Device Tree Include file for Marvell Armada 385 SoC.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-38x.dtsi"
+
+/ {
+	model = "Marvell Armada 385 family SoC";
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-380-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6820-pinctrl";
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-370-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
+
+			/*
+			 * This port can be either x4 or x1. When
+			 * configured in x4 by the bootloader, then
+			 * pcie@4,0 is not available.
+			 */
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			/* x1 port */
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			/*
+			 * x1 port only available when pcie@1,0 is
+			 * configured as a x1 port
+			 */
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-388-db.dts b/src/arm/armada-388-db.dts
new file mode 100644
index 000000000000..16512efcd32c
--- /dev/null
+++ b/src/arm/armada-388-db.dts
@@ -0,0 +1,186 @@
+/*
+ * Device Tree file for Marvell Armada 388 evaluation board
+ * (DB-88F6820)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Development Board";
+	compatible = "marvell,a385-db", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "w25q32";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "ok";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sata@e0000 {
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "U-Boot";
+					reg = <0 0x800000>;
+				};
+				partition@800000 {
+					label = "Linux";
+					reg = <0x800000 0x800000>;
+				};
+				partition@1000000 {
+					label = "Filesystem";
+					reg = <0x1000000 0x3f000000>;
+				};
+			};
+
+			sdhci@d8000 {
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-388-gp.dts b/src/arm/armada-388-gp.dts
new file mode 100644
index 000000000000..590b383db323
--- /dev/null
+++ b/src/arm/armada-388-gp.dts
@@ -0,0 +1,414 @@
+/*
+ * Device Tree file for Marvell Armada 385 development board
+ * (RD-88F6820-GP)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 GP";
+	compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_pins>;
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <50000000>;
+					m25p,fast-read;
+				};
+			};
+
+			i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+				clock-frequency = <100000>;
+				/*
+				 * The EEPROM located at adresse 54 is needed
+				 * for the boot - DO NOT ERASE IT -
+				 */
+
+				expander0: pca9555@20 {
+					compatible = "nxp,pca9555";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pca0_pins>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					reg = <0x20>;
+				};
+
+				expander1: pca9555@21 {
+					compatible = "nxp,pca9555";
+					pinctrl-names = "default";
+					interrupt-parent = <&gpio0>;
+					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					reg = <0x21>;
+				};
+
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON16
+				 * through an FTDI
+				 */
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			/* GE1 CON15 */
+			ethernet@30000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* CON4 */
+			usb@50000 {
+				vcc-supply = <&reg_usb2_0_vbus>;
+				status = "okay";
+			};
+
+			/* GE0 CON1 */
+			ethernet@70000 {
+				pinctrl-names = "default";
+				/*
+				 * The Reference Clock 0 is used to provide a
+				 * clock to the PHY
+				 */
+				pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy1: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			sata@a8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata0_pins>, <&sata1_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata0>;
+				};
+
+				sata1: sata-port@1 {
+					reg = <1>;
+					target-supply = <&reg_5v_sata1>;
+				};
+			};
+
+			sata@e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata2: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata2>;
+				};
+
+				sata3: sata-port@1 {
+					reg = <1>;
+					target-supply = <&reg_5v_sata3>;
+				};
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+			};
+
+			/* CON5 */
+			usb3@f0000 {
+				vcc-supply = <&reg_usb2_1_vbus>;
+				status = "okay";
+			};
+
+			/* CON7 */
+			usb3@f8000 {
+				vcc-supply = <&reg_usb3_vbus>;
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/*
+			 * The two other PCIe units are accessible
+			 * through mini PCIe slot on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		gpio-fan {
+			compatible = "gpio-fan";
+			gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
+			gpio-fan,speed-map = <	 0 0
+					      3000 1>;
+		};
+	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_0_vbus: v5-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_1_vbus: v5-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb2_1_vbus: v5-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sata0: pwr-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata0";
+		enable-active-high;
+		regulator-always-on;
+
+	};
+
+	reg_5v_sata0: v5-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_12v_sata0: v12-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_sata1: pwr-sata1 {
+		regulator-name = "pwr_en_sata1";
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata1: v5-sata1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata1>;
+	};
+
+	reg_12v_sata1: v12-sata1 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata1";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata1>;
+	};
+
+	reg_sata2: pwr-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata2";
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata2: v5-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata2>;
+	};
+
+	reg_12v_sata2: v12-sata2 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata2";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata2>;
+	};
+
+	reg_sata3: pwr-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata3";
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata3: v5-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata3>;
+	};
+
+	reg_12v_sata3: v12-sata3 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata3";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		vin-supply = <&reg_sata3>;
+	};
+};
+
+&pinctrl {
+	pca0_pins: pca0_pins {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+};
diff --git a/src/arm/armada-388-rd.dts b/src/arm/armada-388-rd.dts
new file mode 100644
index 000000000000..d99baac72081
--- /dev/null
+++ b/src/arm/armada-388-rd.dts
@@ -0,0 +1,132 @@
+/*
+ * Device Tree file for Marvell Armada 388 Reference Design board
+ * (RD-88F6820-AP)
+ *
+ *  Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+
+/ {
+	model = "Marvell Armada 385 Reference Design";
+	compatible = "marvell,a385-rd", "marvell,armada388",
+		"marvell,armada385","marvell,armada380";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "st,m25p128";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+
+			mdio@72004 {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/*
+			 * One PCIe units is accessible through
+			 * standard PCIe slot on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-388.dtsi b/src/arm/armada-388.dtsi
new file mode 100644
index 000000000000..564fa5937e25
--- /dev/null
+++ b/src/arm/armada-388.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Device Tree Include file for Marvell Armada 388 SoC.
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ *
+ * The main difference with the Armada 385 is that the 388 can handle two more
+ * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
+ * property and the name of the SoC, and add the second SATA host which control
+ * the 2 other ports.
+ */
+
+#include "armada-385.dtsi"
+
+/ {
+	model = "Marvell Armada 388 family SoC";
+	compatible = "marvell,armada388", "marvell,armada385",
+		"marvell,armada380";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6828-pinctrl";
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+		};
+	};
+};
diff --git a/src/arm/armada-38x.dtsi b/src/arm/armada-38x.dtsi
new file mode 100644
index 000000000000..1dff30a81e24
--- /dev/null
+++ b/src/arm/armada-38x.dtsi
@@ -0,0 +1,591 @@
+/*
+ * Device Tree Include file for Marvell Armada 38x family of SoCs.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Armada 38x family SoC";
+	compatible = "marvell,armada380";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
+	soc {
+		compatible = "marvell,armada380-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		interrupt-parent = <&gic>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
+		};
+
+		devbus-bootcs {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs0 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs1 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs2 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		devbus-cs3 {
+			compatible = "marvell,mvebu-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			L2: cache-controller@8000 {
+				compatible = "arm,pl310-cache";
+				reg = <0x8000 0x1000>;
+				cache-unified;
+				cache-level = <2>;
+			};
+
+			scu@c000 {
+				compatible = "arm,cortex-a9-scu";
+				reg = <0xc000 0x58>;
+			};
+
+			timer@c600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xc600 0x20>;
+				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
+			gic: interrupt-controller@d000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				#size-cells = <0>;
+				interrupt-controller;
+				reg = <0xd000 0x1000>,
+				      <0xc100 0x100>;
+			};
+
+			spi0: spi@10600 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi@10680 {
+				compatible = "marvell,orion-spi";
+				reg = <0x10680 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			serial@12100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@18000 {
+				reg = <0x18000 0x20>;
+
+				ge0_rgmii_pins: ge-rgmii-pins-0 {
+					marvell,pins = "mpp6", "mpp7", "mpp8",
+						       "mpp9", "mpp10", "mpp11",
+						       "mpp12", "mpp13", "mpp14",
+						       "mpp15", "mpp16", "mpp17";
+					marvell,function = "ge0";
+				};
+
+				ge1_rgmii_pins: ge-rgmii-pins-1 {
+					marvell,pins = "mpp21", "mpp27", "mpp28",
+						       "mpp29", "mpp30", "mpp31",
+						       "mpp32", "mpp37", "mpp38",
+						       "mpp39", "mpp40", "mpp41";
+					marvell,function = "ge1";
+				};
+
+				i2c0_pins: i2c-pins-0 {
+					marvell,pins = "mpp2", "mpp3";
+					marvell,function = "i2c0";
+				};
+
+				mdio_pins: mdio-pins {
+					marvell,pins = "mpp4", "mpp5";
+					marvell,function = "ge";
+				};
+
+				ref_clk0_pins: ref-clk-pins-0 {
+					marvell,pins = "mpp45";
+					marvell,function = "ref";
+				};
+
+				ref_clk1_pins: ref-clk-pins-1 {
+					marvell,pins = "mpp46";
+					marvell,function = "ref";
+				};
+
+				spi0_pins: spi-pins-0 {
+					marvell,pins = "mpp22", "mpp23", "mpp24",
+						       "mpp25";
+					marvell,function = "spi0";
+				};
+
+				spi1_pins: spi-pins-1 {
+					marvell,pins = "mpp56", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "spi1";
+				};
+
+				uart0_pins: uart-pins-0 {
+					marvell,pins = "mpp0", "mpp1";
+					marvell,function = "ua0";
+				};
+
+				uart1_pins: uart-pins-1 {
+					marvell,pins = "mpp19", "mpp20";
+					marvell,function = "ua1";
+				};
+
+				sdhci_pins: sdhci-pins {
+					marvell,pins = "mpp48", "mpp49", "mpp50",
+						       "mpp52", "mpp53", "mpp54",
+						       "mpp55", "mpp57", "mpp58",
+						       "mpp59";
+					marvell,function = "sd0";
+				};
+
+				sata0_pins: sata-pins-0 {
+					marvell,pins = "mpp20";
+					marvell,function = "sata0";
+				};
+
+				sata1_pins: sata-pins-1 {
+					marvell,pins = "mpp19";
+					marvell,function = "sata1";
+				};
+
+				sata2_pins: sata-pins-2 {
+					marvell,pins = "mpp47";
+					marvell,function = "sata2";
+				};
+
+				sata3_pins: sata-pins-3 {
+					marvell,pins = "mpp44";
+					marvell,function = "sata3";
+				};
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-380-system-controller",
+					     "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x100>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-380-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18600 {
+				compatible = "marvell,armada-380-core-clock";
+				reg = <0x18600 0x04>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			mpic: interrupt-controller@20000 {
+				compatible = "marvell,mpic";
+				reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+				#interrupt-cells = <1>;
+				#size-cells = <1>;
+				interrupt-controller;
+				msi-controller;
+				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-380-timer",
+					     "marvell,armada-xp-timer";
+				reg = <0x20300 0x30>, <0x21040 0x30>;
+				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+						      <&mpic 5>,
+						      <&mpic 6>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x10>;
+			};
+
+			mpcore-soc-ctrl@20d20 {
+				compatible = "marvell,armada-380-mpcore-soc-ctrl";
+				reg = <0x20d20 0x6c>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
+			pmsu@22000 {
+				compatible = "marvell,armada-380-pmsu";
+				reg = <0x22000 0x1000>;
+			};
+
+			eth1: ethernet@30000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x30000 0x4000>;
+				interrupts-extended = <&mpic 10>;
+				clocks = <&gateclk 3>;
+				status = "disabled";
+			};
+
+			eth2: ethernet@34000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x34000 0x4000>;
+				interrupts-extended = <&mpic 12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+			};
+
+			usb@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x58000 0x500>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 18>;
+				status = "disabled";
+			};
+
+			xor@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts-extended = <&mpic 8>;
+				clocks = <&gateclk 4>;
+				status = "disabled";
+			};
+
+			mdio@72004 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,orion-mdio";
+				reg = <0x72004 0x4>;
+				clocks = <&gateclk 4>;
+			};
+
+			rtc@a3800 {
+				compatible = "marvell,armada-380-rtc";
+				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
+
+			coredivclk: clock@e4250 {
+				compatible = "marvell,armada-380-corediv-clock";
+				reg = <0xe4250 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				status = "okay";
+			};
+
+			flash@d0000 {
+				compatible = "marvell,armada370-nand";
+				reg = <0xd0000 0x54>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coredivclk 0>;
+				status = "disabled";
+			};
+
+			sdhci@d8000 {
+				compatible = "marvell,armada-380-sdhci";
+				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+				interrupts = <0 25 0x4>;
+				clocks = <&gateclk 17>;
+				mrvl,clk-delay-cycles = <0x1F>;
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			usb3@f8000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+		};
+	};
+
+	clocks {
+		/* 2 GHz fixed main PLL */
+		mainpll: mainpll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <2000000000>;
+		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
diff --git a/src/arm/armada-xp-axpwifiap.dts b/src/arm/armada-xp-axpwifiap.dts
new file mode 100644
index 000000000000..c1fbab243609
--- /dev/null
+++ b/src/arm/armada-xp-axpwifiap.dts
@@ -0,0 +1,179 @@
+/*
+ * Device Tree file for Marvell RD-AXPWiFiAP.
+ *
+ * Note: this board is shipped with a new generation boot loader that
+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
+ * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Marvell RD-AXPWiFiAP";
+	compatible = "marvell,rd-axpwifiap", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* First mini-PCIe port */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Second mini-PCIe port */
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+
+			/* Renesas uPD720202 USB 3.0 controller */
+			pcie@3,0 {
+				/* Port 0, Lane 3 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			/* UART0 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* UART1 */
+			serial@12100 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <1>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&keys_pin>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Factory Reset Button";
+			linux,code = <KEY_SETUP>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&phy_int_pin>;
+	pinctrl-names = "default";
+
+	keys_pin: keys-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	phy_int_pin: phy-int-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
diff --git a/src/arm/armada-xp-db.dts b/src/arm/armada-xp-db.dts
new file mode 100644
index 000000000000..48bdafe17526
--- /dev/null
+++ b/src/arm/armada-xp-db.dts
@@ -0,0 +1,232 @@
+/*
+ * Device Tree file for Marvell Armada XP evaluation board
+ * (DB-78460-BP)
+ *
+ * Copyright (C) 2012-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+  *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Evaluation Board";
+	compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * All 6 slots are physically present as
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+			pcie@3,0 {
+				/* Port 0, Lane 2 */
+				status = "okay";
+			};
+			pcie@4,0 {
+				/* Port 0, Lane 3 */
+				status = "okay";
+			};
+			pcie@9,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+			pcie@10,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <25>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <27>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
+			};
+
+			mvsdio@d4000 {
+				pinctrl-0 = <&sdio_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				/* No CD or WP GPIOs */
+				broken-cd;
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			usb@52000 {
+				status = "okay";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "m25p64";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <20000000>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-xp-gp.dts b/src/arm/armada-xp-gp.dts
new file mode 100644
index 000000000000..206aebba01be
--- /dev/null
+++ b/src/arm/armada-xp-gp.dts
@@ -0,0 +1,245 @@
+/*
+ * Device Tree file for Marvell Armada XP development board
+ * (DB-MV784MP-GP)
+ *
+ * Copyright (C) 2013-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Development Board DB-MV784MP-GP";
+	compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		/*
+                 * 8 GB of plug-in RAM modules by default.The amount
+                 * of memory available can be changed by the
+                 * bootloader according the size of the module
+                 * actually plugged. However, memory between
+                 * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
+                 * the address range used for I/O (internal registers,
+                 * MBus windows).
+		 */
+		reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
+		      <0x00000001 0x00000000 0x00000001 0x00000000>;
+	};
+
+	cpus {
+		pm_pic {
+			ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
+				     <&gpio0 17 GPIO_ACTIVE_LOW>,
+				     <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 16 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x1000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The 3 slots are physically present as
+			 * standard PCIe slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@9,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+			};
+			pcie@10,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+			pinctrl {
+				pinctrl-0 = <&pic_pins>;
+				pinctrl-names = "default";
+				pic_pins: pic-pins-0 {
+					marvell,pins = "mpp16", "mpp17",
+						       "mpp18";
+					marvell,function = "gpio";
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <16>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <17>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <18>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <19>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "qsgmii";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "qsgmii";
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "qsgmii";
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "qsgmii";
+			};
+
+			/* Front-side USB slot */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* Back-side USB slot */
+			usb@51000 {
+				status = "okay";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <108000000>;
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-xp-lenovo-ix4-300d.dts b/src/arm/armada-xp-lenovo-ix4-300d.dts
new file mode 100644
index 000000000000..5fb3c8b687cf
--- /dev/null
+++ b/src/arm/armada-xp-lenovo-ix4-300d.dts
@@ -0,0 +1,326 @@
+/*
+ * Device Tree file for Lenovo Iomega ix4-300d
+ *
+ * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Lenovo Iomega ix4-300d";
+	compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Quad port sata: Marvell 88SX7042 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* USB 3.0 xHCI controller: NEC D720200F1 */
+			pcie@5,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				adt7473@2e {
+					compatible = "adi,adt7473";
+					reg = <0x2e>;
+				};
+
+				eeprom@50 {
+					compatible = "atmel,24c64";
+					reg = <0x50>;
+				};
+
+				pcf8563@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0000000 0xe0000>;
+					read-only;
+				};
+
+				partition@e0000 {
+					label = "u-boot-env";
+					reg = <0xe0000 0x20000>;
+					read-only;
+				};
+
+				partition@100000 {
+					label = "u-boot-env2";
+					reg = <0x100000 0x20000>;
+					read-only;
+				};
+
+				partition@120000 {
+					label = "zImage";
+					reg = <0x120000 0x400000>;
+				};
+
+				partition@520000 {
+					label = "initrd";
+					reg = <0x520000 0x400000>;
+				};
+
+				partition@xE00000 {
+					label = "boot";
+					reg = <0xE00000 0x3F200000>;
+				};
+
+				partition@flash {
+					label = "flash";
+					reg = <0x0 0x40000000>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin
+			&select_button_pin &scroll_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+
+		select-button {
+			label = "Select Button";
+			linux,code = <BTN_SELECT>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		scroll-button {
+			label = "Scroll Button";
+			linux,code = <KEY_SCROLLDOWN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi3 {
+		compatible = "spi-gpio";
+		status = "okay";
+		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
+		cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&hdd_led_pin>;
+		pinctrl-names = "default";
+
+		hdd-led {
+			label = "ix4-300d:hdd:blue";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power-led {
+			label = "ix4-300d:power:white";
+			gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
+			/* init blinking while booting */
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+
+		sysfail-led {
+			label = "ix4-300d:sysfail:red";
+			gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		sys-led {
+			label = "ix4-300d:sys:blue";
+			gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		hddfail-led {
+			label = "ix4-300d:hddfail:red";
+			gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+	};
+
+	/*
+	 * Warning: you need both eth1 & 0 PHY initialized (i.e having
+	 * them up does the tweak) for poweroff to shutdown otherwise it
+	 * reboots
+	 */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff_pin>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	poweroff_pin: poweroff-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+	select_button_pin: select-button-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	scroll_button_pin: scroll-button-pin {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	hdd_led_pin: hdd-led-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+};
diff --git a/src/arm/armada-xp-matrix.dts b/src/arm/armada-xp-matrix.dts
new file mode 100644
index 000000000000..56f958eb1ede
--- /dev/null
+++ b/src/arm/armada-xp-matrix.dts
@@ -0,0 +1,114 @@
+/*
+ * Device Tree file for Marvell Armada XP Matrix board
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-xp-mv78460.dtsi"
+
+/ {
+	model = "Marvell Armada XP Matrix Board";
+	compatible = "marvell,axp-matrix", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		/*
+		 * This board has 4 GB of RAM, but the last 256 MB of
+		 * RAM are not usable due to the overlap with the MBus
+		 * Window address range
+		 */
+		reg = <0 0x00000000 0 0xf0000000>;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+			serial@12200 {
+				status = "okay";
+			};
+			serial@12300 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@30000 {
+				status = "okay";
+				phy-mode = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			pcie-controller {
+				status = "okay";
+
+				pcie@1,0 {
+					/* Port 0, Lane 0 */
+					status = "okay";
+				};
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/armada-xp-mv78230.dtsi b/src/arm/armada-xp-mv78230.dtsi
new file mode 100644
index 000000000000..6e6d0f04bf2b
--- /dev/null
+++ b/src/arm/armada-xp-mv78230.dtsi
@@ -0,0 +1,231 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the Armada XP MV78230 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78230 SoC";
+	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x1 only.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78230-pinctrl";
+};
diff --git a/src/arm/armada-xp-mv78260.dtsi b/src/arm/armada-xp-mv78260.dtsi
new file mode 100644
index 000000000000..4a7cbed79b07
--- /dev/null
+++ b/src/arm/armada-xp-mv78260.dtsi
@@ -0,0 +1,334 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the Armada XP MV78260 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78260 SoC";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		eth3 = &eth3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. One unit is
+		 * x4 only.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78260-pinctrl";
+};
diff --git a/src/arm/armada-xp-mv78460.dtsi b/src/arm/armada-xp-mv78460.dtsi
new file mode 100644
index 000000000000..36ce63a96cc9
--- /dev/null
+++ b/src/arm/armada-xp-mv78460.dtsi
@@ -0,0 +1,372 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the Armada XP MV78460 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP MV78460 SoC";
+	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		eth3 = &eth3;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,armada-xp-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <2>;
+			clocks = <&cpuclk 2>;
+			clock-latency = <1000000>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <3>;
+			clocks = <&cpuclk 3>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		/*
+		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
+		 * configured as x4 or quad x1 lanes. Two units are
+		 * x4/x1.
+		 */
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
+				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
+				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
+				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
+
+				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+			pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 58>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+			};
+
+			pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 59>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 6>;
+				status = "disabled";
+			};
+
+			pcie@3,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 60>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 7>;
+				status = "disabled";
+			};
+
+			pcie@4,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 61>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 8>;
+				status = "disabled";
+			};
+
+			pcie@5,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+
+			pcie@6,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 26>;
+				status = "disabled";
+			};
+
+			pcie@10,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+				reg = <0x5000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 103>;
+				marvell,pcie-port = <3>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 27>;
+				status = "disabled";
+			};
+		};
+
+		internal-regs {
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>, <88>, <89>, <90>;
+			};
+
+			gpio2: gpio@18180 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <91>;
+			};
+
+			eth3: ethernet@34000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x34000 0x4000>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	compatible = "marvell,mv78460-pinctrl";
+};
diff --git a/src/arm/armada-xp-netgear-rn2120.dts b/src/arm/armada-xp-netgear-rn2120.dts
new file mode 100644
index 000000000000..99cb9a8401b4
--- /dev/null
+++ b/src/arm/armada-xp-netgear-rn2120.dts
@@ -0,0 +1,370 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS 2120
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS 2120";
+	compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to first Marvell 88SE9170 SATA controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/* Connected to second Marvell 88SE9170 SATA controller */
+			pcie@2,0 {
+				/* Port 0, Lane 1 */
+				status = "okay";
+			};
+
+			/* Connected to Fresco Logic FL1009 USB 3.0 controller */
+			pcie@5,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			/* Two rear eSATA ports */
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				clock-frequency = <400000>;
+				status = "okay";
+
+				isl12057: isl12057@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					isil,irq2-can-wakeup-machine;
+				};
+
+				/* Controller for rear fan #1 of 3 (Protechnic
+				 * MGT4012XB-O20, 8000RPM) near eSATA port */
+				g762_fan1: g762@3e {
+					compatible = "gmt,g762";
+					reg = <0x3e>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear (center) fan #2 of 3 */
+				g762_fan2: g762@48 {
+					compatible = "gmt,g762";
+					reg = <0x48>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/*  Controller for rear fan #3 of 3 */
+				g762_fan3: g762@49 {
+					compatible = "gmt,g762";
+					reg = <0x49>;
+					clocks = <&g762_clk>; /* input clock */
+					fan_gear_mode = <0>;
+					fan_startv = <1>;
+					pwm_polarity = <0>;
+				};
+
+				/* Temperature sensor */
+				g751: g751@4c {
+					compatible = "gmt,g751";
+					reg = <0x4c>;
+				};
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				/* Use Hardware BCH ECC */
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0000000 0x180000>;  /* 1.5MB */
+					read-only;
+				};
+
+				partition@180000 {
+					label = "u-boot-env";
+					reg = <0x180000 0x20000>;    /* 128KB */
+					read-only;
+				};
+
+				partition@200000 {
+					label = "uImage";
+					reg = <0x0200000 0x600000>;    /* 6MB */
+				};
+
+				partition@800000 {
+					label = "minirootfs";
+					reg = <0x0800000 0x400000>;    /* 4MB */
+				};
+
+				/* Last MB is for the BBT, i.e. not writable */
+				partition@c00000 {
+					label = "ubifs";
+					reg = <0x0c00000 0x7400000>; /* 116MB */
+				};
+			};
+		};
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin
+			     &sata3_led_pin &sata4_led_pin>;
+		pinctrl-names = "default";
+
+		red-sata1-led {
+			label = "rn2120:red:sata1";
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata2-led {
+			label = "rn2120:red:sata2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata3-led {
+			label = "rn2120:red:sata3";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-sata4-led {
+			label = "rn2120:red:sata4";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red-err-led {
+			label = "rn2120:red:err";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&power_button_pin &reset_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	poweroff: poweroff {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp27";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	sata1_led_pin: sata1-led-pin {
+		marvell,pins = "mpp31";
+		marvell,function = "gpio";
+	};
+
+	sata2_led_pin: sata2-led-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	sata3_led_pin: sata3-led-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	sata4_led_pin: sata4-led-pin {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+
+	sata1_power_pin: sata1-power-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	sata2_power_pin: sata2-power-pin {
+		marvell,pins = "mpp25";
+		marvell,function = "gpio";
+	};
+
+	sata3_power_pin: sata3-power-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+
+	sata4_power_pin: sata4-power-pin {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	sata3_pres_pin: sata3-pres-pin {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	sata4_pres_pin: sata4-pres-pin {
+		marvell,pins = "mpp35";
+		marvell,function = "gpio";
+	};
+
+	err_led_pin: err-led-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+};
diff --git a/src/arm/armada-xp-openblocks-ax3-4.dts b/src/arm/armada-xp-openblocks-ax3-4.dts
new file mode 100644
index 000000000000..0c76d9f05fd0
--- /dev/null
+++ b/src/arm/armada-xp-openblocks-ax3-4.dts
@@ -0,0 +1,225 @@
+/*
+ * Device Tree file for OpenBlocks AX3-4 board
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-xp-mv78260.dtsi"
+
+/ {
+	model = "PlatHome OpenBlocks AX3-4 board";
+	compatible = "plathome,openblocks-ax3-4", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+		devbus-bootcs {
+			status = "okay";
+
+			/* Device Bus parameters are required */
+
+			/* Read parameters */
+			devbus,bus-width    = <16>;
+			devbus,turn-off-ps  = <60000>;
+			devbus,badr-skew-ps = <0>;
+			devbus,acc-first-ps = <124000>;
+			devbus,acc-next-ps  = <248000>;
+			devbus,rd-setup-ps  = <0>;
+			devbus,rd-hold-ps   = <0>;
+
+			/* Write parameters */
+			devbus,sync-enable = <0>;
+			devbus,wr-high-ps  = <60000>;
+			devbus,wr-low-ps   = <60000>;
+			devbus,ale-wr-ps   = <60000>;
+
+			/* NOR 128 MiB */
+			nor@0 {
+				compatible = "cfi-flash";
+				reg = <0 0x8000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+			/* Internal mini-PCIe connector */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+			serial@12100 {
+				status = "okay";
+			};
+
+			leds {
+				compatible = "gpio-leds";
+				pinctrl-names = "default";
+				pinctrl-0 = <&led_pins>;
+
+				red_led {
+					label = "red_led";
+					gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				yellow_led {
+					label = "yellow_led";
+					gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+					default-state = "off";
+				};
+
+				green_led {
+					label = "green_led";
+					gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+					default-state = "keep";
+				};
+			};
+
+			gpio_keys {
+				compatible = "gpio-keys";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				button@1 {
+					label = "Init Button";
+					linux,code = <KEY_POWER>;
+					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					reg = <3>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+			ethernet@74000 {
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
+			};
+			ethernet@30000 {
+				status = "okay";
+				phy = <&phy2>;
+				phy-mode = "sgmii";
+			};
+			ethernet@34000 {
+				status = "okay";
+				phy = <&phy3>;
+				phy-mode = "sgmii";
+			};
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <400000>;
+			};
+			i2c@11100 {
+				status = "okay";
+				clock-frequency = <400000>;
+
+				s35390a: s35390a@30 {
+					compatible = "s35390a";
+					reg = <0x30>;
+				};
+			};
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			/* Front side USB 0 */
+			usb@50000 {
+				status = "okay";
+			};
+
+			/* Front side USB 1 */
+			usb@51000 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	led_pins: led-pins-0 {
+		marvell,pins = "mpp49", "mpp51", "mpp53";
+		marvell,function = "gpio";
+	};
+};
diff --git a/src/arm/armada-xp-synology-ds414.dts b/src/arm/armada-xp-synology-ds414.dts
new file mode 100644
index 000000000000..e9fb225169aa
--- /dev/null
+++ b/src/arm/armada-xp-synology-ds414.dts
@@ -0,0 +1,363 @@
+/*
+ * Device Tree file for Synology DS414
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+	model = "Synology DS414";
+	compatible = "synology,ds414", "marvell,armadaxp-mv78230",
+		     "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * Connected to Marvell 88SX7042 SATA-II controller
+			 * handling the four disks.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			/*
+			 * Connected to EtronTech EJ168A XHCI controller
+			 * providing the two rear USB 3.0 ports.
+			 */
+			pcie@5,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+
+			/* RTC is provided by Seiko S-35390A below */
+			rtc@10300 {
+				status = "disabled";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
+
+				spi-flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "micron,n25q064";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <20000000>;
+
+					/*
+					 * Warning!
+					 *
+					 * Synology u-boot uses its compiled-in environment
+					 * and it seems Synology did not care to change u-boot
+					 * default configuration in order to allow saving a
+					 * modified environment at a sensible location. So,
+					 * if you do a 'saveenv' under u-boot, your modified
+					 * environment will be saved at 1MB after the start
+					 * of the flash, i.e. in the middle of the uImage.
+					 * For that reason, it is strongly advised not to
+					 * change the default environment, unless you know
+					 * what you are doing.
+					 */
+					partition@00000000 { /* u-boot */
+						label = "RedBoot";
+						reg = <0x00000000 0x000d0000>; /* 832KB */
+					};
+
+					partition@000c0000 { /* uImage */
+						label = "zImage";
+						reg = <0x000d0000 0x002d0000>; /* 2880KB */
+					};
+
+					partition@003a0000 { /* uInitramfs */
+						label = "rd.gz";
+						reg = <0x003a0000 0x00430000>; /* 4250KB */
+					};
+
+					partition@007d0000 { /* MAC address and serial number */
+						label = "vendor";
+						reg = <0x007d0000 0x00010000>; /* 64KB */
+					};
+
+					partition@007e0000 {
+						label = "RedBoot config";
+						reg = <0x007e0000 0x00010000>; /* 64KB */
+					};
+
+					partition@007f0000 {
+						label = "FIS directory";
+						reg = <0x007f0000 0x00010000>; /* 64KB */
+					};
+				};
+			};
+
+			i2c@11000 {
+				clock-frequency = <400000>;
+				status = "okay";
+
+				s35390a: s35390a@30 {
+					 compatible = "sii,s35390a";
+					 reg = <0x30>;
+				};
+			};
+
+			/* Connected to a header on device's PCB. This
+			 * provides the main console for the device.
+			 *
+			 * Warning: the device may not boot with a 3.3V
+			 * USB-serial converter connected when the power
+			 * button is pressed. The converter needs to be
+			 * connected a few seconds after pressing the
+			 * power button. This is possibly due to UART0_TXD
+			 * pin being sampled at reset (bit 0 of SAR).
+			 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* Connected to a Microchip PIC16F883 for power control */
+			serial@12100 {
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+					reg = <0>;
+				};
+
+				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+					reg = <1>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
+			     &sata3_pwr_pin &sata4_pwr_pin>;
+		pinctrl-names = "default";
+
+		sata1_regulator: sata1-regulator {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata2_regulator: sata2-regulator {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA2 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata3_regulator: sata3-regulator {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "SATA3 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <6000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata4_regulator: sata4-regulator {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "SATA4 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <8000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	sata1_pwr_pin: sata1-pwr-pin {
+		marvell,pins = "mpp42";
+		marvell,function = "gpio";
+	};
+
+	sata2_pwr_pin: sata2-pwr-pin {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+
+	sata3_pwr_pin: sata3-pwr-pin {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+
+	sata4_pwr_pin: sata4-pwr-pin {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	sata1_pres_pin: sata1-pres-pin {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+
+	sata2_pres_pin: sata2-pres-pin {
+		marvell,pins = "mpp35";
+		marvell,function = "gpio";
+	};
+
+	sata3_pres_pin: sata3-pres-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	sata4_pres_pin: sata4-pres-pin {
+		marvell,pins = "mpp41";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit0_pin: syno-id-bit0-pin {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit1_pin: syno-id-bit1-pin {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	syno_id_bit2_pin: syno-id-bit2-pin {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	fan1_alarm_pin: fan1-alarm-pin {
+		marvell,pins = "mpp33";
+		marvell,function = "gpio";
+	};
+
+	fan2_alarm_pin: fan2-alarm-pin {
+		marvell,pins = "mpp32";
+		marvell,function = "gpio";
+	};
+};
diff --git a/src/arm/armada-xp.dtsi b/src/arm/armada-xp.dtsi
new file mode 100644
index 000000000000..82917236a2fb
--- /dev/null
+++ b/src/arm/armada-xp.dtsi
@@ -0,0 +1,302 @@
+/*
+ * Device Tree Include file for Marvell Armada XP family SoC
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Ben Dooks <ben.dooks@codethink.co.uk>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Contains definitions specific to the Armada XP SoC that are not
+ * common to all Armada SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+
+/ {
+	model = "Marvell Armada XP family SoC";
+	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
+
+	aliases {
+		eth2 = &eth2;
+	};
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		internal-regs {
+			sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: l2-cache {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-unified;
+				wt-override;
+			};
+
+			spi0: spi@10600 {
+				pinctrl-0 = <&spi0_pins>;
+				pinctrl-names = "default";
+			};
+
+			i2c0: i2c@11000 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x100>;
+			};
+
+			i2c1: i2c@11100 {
+				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+				reg = <0x11100 0x100>;
+			};
+
+			uart2: serial@12200 {
+				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart2_pins>;
+				pinctrl-names = "default";
+				reg = <0x12200 0x100>;
+				reg-shift = <2>;
+				interrupts = <43>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "snps,dw-apb-uart";
+				pinctrl-0 = <&uart3_pins>;
+				pinctrl-names = "default";
+				reg = <0x12300 0x100>;
+				reg-shift = <2>;
+				interrupts = <44>;
+				reg-io-width = <1>;
+				clocks = <&coreclk 0>;
+				status = "disabled";
+			};
+
+			system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,armada-xp-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			coreclk: mvebu-sar@18230 {
+				compatible = "marvell,armada-xp-core-clock";
+				reg = <0x18230 0x08>;
+				#clock-cells = <1>;
+			};
+
+			thermal@182b0 {
+				compatible = "marvell,armadaxp-thermal";
+				reg = <0x182b0 0x4
+					0x184d0 0x4>;
+				status = "okay";
+			};
+
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,armada-xp-cpu-clock";
+				reg = <0x18700 0xA0>, <0x1c054 0x10>;
+				clocks = <&coreclk 1>;
+			};
+
+			interrupt-controller@20000 {
+			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+			};
+
+			timer@20300 {
+				compatible = "marvell,armada-xp-timer";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,armada-xp-wdt";
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
+			cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x20>;
+			};
+
+			eth2: ethernet@30000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x30000 0x4000>;
+				interrupts = <12>;
+				clocks = <&gateclk 2>;
+				status = "disabled";
+			};
+
+			usb@50000 {
+				clocks = <&gateclk 18>;
+			};
+
+			usb@51000 {
+				clocks = <&gateclk 19>;
+			};
+
+			usb@52000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x52000 0x500>;
+				interrupts = <47>;
+				clocks = <&gateclk 20>;
+				status = "disabled";
+			};
+
+			xor@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+		};
+	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
+
+&pinctrl {
+	ge0_gmii_pins: ge0-gmii-pins {
+		marvell,pins =
+		     "mpp0",  "mpp1",  "mpp2",  "mpp3",
+		     "mpp4",  "mpp5",  "mpp6",  "mpp7",
+		     "mpp8",  "mpp9",  "mpp10", "mpp11",
+		     "mpp12", "mpp13", "mpp14", "mpp15",
+		     "mpp16", "mpp17", "mpp18", "mpp19",
+		     "mpp20", "mpp21", "mpp22", "mpp23";
+		marvell,function = "ge0";
+	};
+
+	ge0_rgmii_pins: ge0-rgmii-pins {
+		marvell,pins =
+		     "mpp0", "mpp1", "mpp2", "mpp3",
+		     "mpp4", "mpp5", "mpp6", "mpp7",
+		     "mpp8", "mpp9", "mpp10", "mpp11";
+		marvell,function = "ge0";
+	};
+
+	ge1_rgmii_pins: ge1-rgmii-pins {
+		marvell,pins =
+		     "mpp12", "mpp13", "mpp14", "mpp15",
+		     "mpp16", "mpp17", "mpp18", "mpp19",
+		     "mpp20", "mpp21", "mpp22", "mpp23";
+		marvell,function = "ge1";
+	};
+
+	sdio_pins: sdio-pins {
+		marvell,pins = "mpp30", "mpp31", "mpp32",
+			       "mpp33", "mpp34", "mpp35";
+		marvell,function = "sd0";
+	};
+
+	spi0_pins: spi0-pins {
+		marvell,pins = "mpp36", "mpp37",
+			       "mpp38", "mpp39";
+		marvell,function = "spi";
+	};
+
+	uart2_pins: uart2-pins {
+		marvell,pins = "mpp42", "mpp43";
+		marvell,function = "uart2";
+	};
+
+	uart3_pins: uart3-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "uart3";
+	};
+};
diff --git a/src/arm/armv7-m.dtsi b/src/arm/armv7-m.dtsi
new file mode 100644
index 000000000000..5a660d0faf42
--- /dev/null
+++ b/src/arm/armv7-m.dtsi
@@ -0,0 +1,18 @@
+#include "skeleton.dtsi"
+
+/ {
+	nvic: nv-interrupt-controller  {
+		compatible = "arm,armv7m-nvic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xe000e100 0xc00>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&nvic>;
+		ranges;
+	};
+};
diff --git a/src/arm/at91-sama5d4ek.dts b/src/arm/at91-sama5d4ek.dts
new file mode 100644
index 000000000000..9198b719d0ef
--- /dev/null
+++ b/src/arm/at91-sama5d4ek.dts
@@ -0,0 +1,260 @@
+/*
+ * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Atmel SAMA5D4-EK";
+	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			lcd_bus@f0000000 {
+				status = "okay";
+
+				lcd@f0000000 {
+					status = "okay";
+				};
+
+				lcdovl1@f0000140 {
+					status = "okay";
+				};
+
+				lcdovl2@f0000240 {
+					status = "okay";
+				};
+
+				lcdheo1@f0000340 {
+					status = "okay";
+				};
+			};
+
+			adc0: adc@fc034000 {
+				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
+				atmel,adc-vref = <3300>;
+				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
+				status = "okay";		/* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 6 0>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+					pinctrl_key_gpio: key_gpio_0 {
+						atmel,pins =
+							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
+					};
+				};
+			};
+		};
+
+		usb0: gadget@00400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00600000 {
+			status = "okay";
+		};
+
+		nand0: nand@80000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+			atmel,has-pmecc;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		pb_user1 {
+			label = "pb_user1";
+			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/src/arm/at91rm9200.dtsi b/src/arm/at91rm9200.dtsi
index 65ccf564b9a5..21c2b504f977 100644
--- a/src/arm/at91rm9200.dtsi
+++ b/src/arm/at91rm9200.dtsi
@@ -66,6 +66,11 @@
 		};
 	};
 
+	sram: sram@00200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x4000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -149,7 +154,7 @@
 				usb: usbck {
 					compatible = "atmel,at91rm9200-clk-usb";
 					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2>;
+					atmel,clk-divisors = <1 2 0 0>;
 					clocks = <&pllb>;
 				};
 
@@ -356,6 +361,13 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 			};
 
+			rtc: rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+
 			tcb0: timer@fffa0000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffa0000 0x100>;
diff --git a/src/arm/at91rm9200ek.dts b/src/arm/at91rm9200ek.dts
index 43eb779dd6f6..2a5d21247d7e 100644
--- a/src/arm/at91rm9200ek.dts
+++ b/src/arm/at91rm9200ek.dts
@@ -77,6 +77,10 @@
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
+
+			rtc: rtc@fffffe00 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00300000 {
diff --git a/src/arm/at91sam9260.dtsi b/src/arm/at91sam9260.dtsi
index cb100b03a362..fff0ee69aab4 100644
--- a/src/arm/at91sam9260.dtsi
+++ b/src/arm/at91sam9260.dtsi
@@ -69,6 +69,11 @@
 		};
 	};
 
+	sram0: sram@002ff000 {
+		compatible = "mmio-sram";
+		reg = <0x002ff000 0x2000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -956,6 +961,14 @@
 				};
 			};
 
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
 			watchdog@fffffd40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
@@ -966,6 +979,12 @@
 				atmel,idle-halt;
 				status = "disabled";
 			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/src/arm/at91sam9261.dtsi b/src/arm/at91sam9261.dtsi
index a81aab4281a7..e247b0b5fdab 100644
--- a/src/arm/at91sam9261.dtsi
+++ b/src/arm/at91sam9261.dtsi
@@ -60,6 +60,11 @@
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x28000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -828,12 +833,26 @@
 				clocks = <&mck>;
 			};
 
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
 			watchdog@fffffd40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				status = "disabled";
 			};
+
+			gpbr: syscon@fffffd50 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd50 0x10>;
+				status = "disabled";
+			};
 		};
 	};
 
diff --git a/src/arm/at91sam9263.dtsi b/src/arm/at91sam9263.dtsi
index bb23c2d33cf8..1f67bb4c144e 100644
--- a/src/arm/at91sam9263.dtsi
+++ b/src/arm/at91sam9263.dtsi
@@ -62,6 +62,16 @@
 		};
 	};
 
+	sram0: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x14000>;
+	};
+
+	sram1: sram@00500000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x4000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -122,9 +132,10 @@
 					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
 					clocks = <&main>;
 					reg = <1>;
-					atmel,clk-input-range = <1000000 5000000>;
+					atmel,clk-input-range = <1000000 32000000>;
 					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+								<190000000 240000000 2 1>;
 				};
 
 				mck: masterck {
@@ -293,7 +304,7 @@
 						reg = <17>;
 					};
 
-					ac91_clk: ac97_clk {
+					ac97_clk: ac97_clk {
 						#clock-cells = <0>;
 						reg = <18>;
 					};
@@ -345,10 +356,14 @@
 				};
 			};
 
-			ramc: ramc@ffffe200 {
+			ramc0: ramc@ffffe200 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffe200 0x200>;
+			};
+
+			ramc1: ramc@ffffe800 {
 				compatible = "atmel,at91sam9260-sdramc";
-				reg = <0xffffe200 0x200
-				       0xffffe800 0x200>;
+				reg = <0xffffe800 0x200>;
 			};
 
 			pit: timer@fffffd30 {
@@ -672,6 +687,24 @@
 					};
 				};
 
+				can {
+					pinctrl_can_rx_tx: can_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* CANRX, conflicts with IRQ0 */
+							 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* CANTX, conflicts with PCK0 */
+					};
+				};
+
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A AC97FS pin */
+							 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB13 periph A AC97CK pin */
+							 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A AC97TX pin */
+							 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB14 periph A AC97RX pin */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -800,6 +833,17 @@
 				status = "disabled";
 			};
 
+			ac97: sound@fffa0000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffa0000 0x4000>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&ac97_clk>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
@@ -834,6 +878,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&mci0_clk>;
@@ -845,6 +890,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff84000 0x600>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&mci1_clk>;
@@ -898,6 +944,38 @@
 				clock-names = "pwm_clk";
 				status = "disabled";
 			};
+
+			can: can@fffac000 {
+				compatible = "atmel,at91sam9263-can";
+				reg = <0xfffac000 0x300>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can_rx_tx>;
+				clocks = <&can_clk>;
+				clock-names = "can_clk";
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			rtc@fffffd50 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd50 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x50>;
+				status = "disabled";
+			};
 		};
 
 		fb0: fb@0x00700000 {
@@ -906,6 +984,8 @@
 			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_fb>;
+			clocks = <&lcd_clk>, <&lcd_clk>;
+			clock-names = "lcdc_clk", "hclk";
 			status = "disabled";
 		};
 
diff --git a/src/arm/at91sam9g20.dtsi b/src/arm/at91sam9g20.dtsi
index 31f7652612fc..f59301618163 100644
--- a/src/arm/at91sam9g20.dtsi
+++ b/src/arm/at91sam9g20.dtsi
@@ -16,12 +16,25 @@
 		reg = <0x20000000 0x08000000>;
 	};
 
+	sram0: sram@002ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@002fc000 {
+		compatible = "mmio-sram";
+		reg = <0x002fc000 0x8000>;
+	};
+
 	ahb {
 		apb {
 			i2c0: i2c@fffac000 {
 				compatible = "atmel,at91sam9g20-i2c";
 			};
 
+			ssc0: ssc@fffbc000 {
+				compatible = "atmel,at91sam9rl-ssc";
+			};
+
 			adc0: adc@fffe0000 {
 				atmel,adc-startup-time = <40>;
 			};
@@ -40,6 +53,7 @@
 				};
 
 				pllb: pllbck {
+					compatible = "atmel,at91sam9g20-clk-pllb";
 					atmel,clk-input-range = <2000000 32000000>;
 					atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
 				};
diff --git a/src/arm/at91sam9g20ek_common.dtsi b/src/arm/at91sam9g20ek_common.dtsi
index d2919108e92d..dfaacb113f2e 100644
--- a/src/arm/at91sam9g20ek_common.dtsi
+++ b/src/arm/at91sam9g20ek_common.dtsi
@@ -112,9 +112,23 @@
 				};
 			};
 
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
 			watchdog@fffffd40 {
 				status = "okay";
 			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/src/arm/at91sam9g45.dtsi b/src/arm/at91sam9g45.dtsi
index 932a669156af..ee80aa9c0759 100644
--- a/src/arm/at91sam9g45.dtsi
+++ b/src/arm/at91sam9g45.dtsi
@@ -74,6 +74,11 @@
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -96,8 +101,14 @@
 
 			ramc0: ramc@ffffe400 {
 				compatible = "atmel,at91sam9g45-ddramc";
-				reg = <0xffffe400 0x200
-				       0xffffe600 0x200>;
+				reg = <0xffffe400 0x200>;
+				clocks = <&ddrck>;
+				clock-names = "ddrck";
+			};
+
+			ramc1: ramc@ffffe600 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe600 0x200>;
 				clocks = <&ddrck>;
 				clock-names = "ddrck";
 			};
@@ -159,7 +170,7 @@
 					compatible = "atmel,at91rm9200-clk-master";
 					#clock-cells = <0>;
 					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
 					atmel,clk-output-range = <0 133333333>;
 					atmel,clk-divisors = <1 2 4 3>;
 				};
@@ -175,7 +186,7 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					interrupt-parent = <&pmc>;
-					clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
 
 					prog0: prog0 {
 						#clock-cells = <0>;
@@ -486,6 +497,27 @@
 					};
 				};
 
+				isi {
+					pinctrl_isi: isi-0 {
+						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+							      AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* D9 */
+							      AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+							      AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* D11 */
+							      AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+							      AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+							      AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+							      AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+							      AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+							      AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+							      AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+							      AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+							      AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+							      AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+							      AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* HSYNC */
+							      AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* MCK */>;
+					};
+				};
+
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
@@ -934,6 +966,13 @@
 				status = "disabled";
 			};
 
+			trng@fffcc000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfffcc000 0x4000>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&trng_clk>;
+			};
+
 			i2c0: i2c@fff84000 {
 				compatible = "atmel,at91sam9g10-i2c";
 				reg = <0xfff84000 0x100>;
@@ -1022,6 +1061,17 @@
 				};
 			};
 
+			isi@fffb4000 {
+				compatible = "atmel,at91sam9g45-isi";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&isi_clk>;
+				clock-names = "isi_clk";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi>;
+				status = "disabled";
+			};
+
 			pwm0: pwm@fffb8000 {
 				compatible = "atmel,at91sam9rl-pwm";
 				reg = <0xfffb8000 0x300>;
@@ -1159,6 +1209,53 @@
 					atmel,can-isoc;
 				};
 			};
+
+			sckc@fffffd50 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfffffd50 0x4>;
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <1200000>;
+					clocks = <&slow_xtal>;
+				};
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					atmel,startup-time-usec = <75>;
+					clock-frequency = <32768>;
+					clock-accuracy = <50000000>;
+				};
+
+				clk32k: slck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			rtc@fffffdb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffdb0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
 		};
 
 		fb0: fb@0x00500000 {
@@ -1195,7 +1292,6 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			//TODO
 			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
@@ -1205,7 +1301,6 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			//TODO
 			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
 			clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
 			status = "disabled";
diff --git a/src/arm/at91sam9m10g45ek.dts b/src/arm/at91sam9m10g45ek.dts
index 96ccc7de4f0a..33ce7ca2c404 100644
--- a/src/arm/at91sam9m10g45ek.dts
+++ b/src/arm/at91sam9m10g45ek.dts
@@ -160,6 +160,19 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_pwm_leds>;
 			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd60 {
+				status = "okay";
+			};
+
+			rtc@fffffdb0 {
+				status = "okay";
+			};
 		};
 
 		fb0: fb@0x00500000 {
diff --git a/src/arm/at91sam9n12.dtsi b/src/arm/at91sam9n12.dtsi
index 2bfac310dbec..c2666a7cb5b1 100644
--- a/src/arm/at91sam9n12.dtsi
+++ b/src/arm/at91sam9n12.dtsi
@@ -64,6 +64,11 @@
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -87,6 +92,8 @@
 			ramc0: ramc@ffffe800 {
 				compatible = "atmel,at91sam9g45-ddramc";
 				reg = <0xffffe800 0x200>;
+				clocks = <&ddrck>;
+				clock-names = "ddrck";
 			};
 
 			pmc: pmc@fffffc00 {
@@ -891,6 +898,13 @@
 				status = "disabled";
 			};
 
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+
 			pwm0: pwm@f8034000 {
 				compatible = "atmel,at91sam9rl-pwm";
 				reg = <0xf8034000 0x300>;
diff --git a/src/arm/at91sam9n12ek.dts b/src/arm/at91sam9n12ek.dts
index 83d723711ae1..9575c0d895c9 100644
--- a/src/arm/at91sam9n12ek.dts
+++ b/src/arm/at91sam9n12ek.dts
@@ -54,7 +54,7 @@
 				status = "okay";
 
 				wm8904: codec@1a {
-					compatible = "wm8904";
+					compatible = "wlf,wm8904";
 					reg = <0x1a>;
 					clocks = <&pck0>;
 					clock-names = "mclk";
@@ -136,6 +136,8 @@
 		};
 
 		usb0: ohci@00500000 {
+			num-ports = <1>;
+			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
 			status = "okay";
 		};
 	};
diff --git a/src/arm/at91sam9rl.dtsi b/src/arm/at91sam9rl.dtsi
index ab56c8b81dfa..40f645b8fe25 100644
--- a/src/arm/at91sam9rl.dtsi
+++ b/src/arm/at91sam9rl.dtsi
@@ -70,6 +70,11 @@
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x10000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -204,7 +209,7 @@
 			};
 
 			ssc0: ssc@fffc0000 {
-				compatible = "atmel,at91rm9200-ssc";
+				compatible = "atmel,at91sam9rl-ssc";
 				reg = <0xfffc0000 0x4000>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
@@ -213,7 +218,7 @@
 			};
 
 			ssc1: ssc@fffc4000 {
-				compatible = "atmel,at91rm9200-ssc";
+				compatible = "atmel,at91sam9rl-ssc";
 				reg = <0xfffc4000 0x4000>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
@@ -1059,6 +1064,27 @@
 					clocks = <&slow_rc_osc &slow_osc>;
 				};
 			};
+
+			rtc@fffffeb0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffeb0 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+
+			rtc@fffffd20 {
+				compatible = "atmel,at91sam9260-rtt";
+				reg = <0xfffffd20 0x10>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			gpbr: syscon@fffffd60 {
+				compatible = "atmel,at91sam9260-gpbr", "syscon";
+				reg = <0xfffffd60 0x10>;
+				status = "disabled";
+			};
 		};
 	};
 
diff --git a/src/arm/at91sam9x25.dtsi b/src/arm/at91sam9x25.dtsi
index c2554219f7a4..3c5fa3388997 100644
--- a/src/arm/at91sam9x25.dtsi
+++ b/src/arm/at91sam9x25.dtsi
@@ -10,6 +10,7 @@
 #include "at91sam9x5_usart3.dtsi"
 #include "at91sam9x5_macb0.dtsi"
 #include "at91sam9x5_macb1.dtsi"
+#include "at91sam9x5_can.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X25 SoC";
diff --git a/src/arm/at91sam9x35.dtsi b/src/arm/at91sam9x35.dtsi
index 8eac66ce0ab7..499cdc81f4c0 100644
--- a/src/arm/at91sam9x35.dtsi
+++ b/src/arm/at91sam9x35.dtsi
@@ -8,6 +8,7 @@
 
 #include "at91sam9x5.dtsi"
 #include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_can.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X35 SoC";
diff --git a/src/arm/at91sam9x5.dtsi b/src/arm/at91sam9x5.dtsi
index e1a5c70b885c..818dabdd8c0e 100644
--- a/src/arm/at91sam9x5.dtsi
+++ b/src/arm/at91sam9x5.dtsi
@@ -72,6 +72,11 @@
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x8000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -95,6 +100,8 @@
 			ramc0: ramc@ffffe800 {
 				compatible = "atmel,at91sam9g45-ddramc";
 				reg = <0xffffe800 0x200>;
+				clocks = <&ddrck>;
+				clock-names = "ddrck";
 			};
 
 			pmc: pmc@fffffc00 {
@@ -858,6 +865,9 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
 				clocks = <&mck>;
 				clock-names = "usart";
 				status = "disabled";
@@ -869,6 +879,9 @@
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
 				clocks = <&usart0_clk>;
 				clock-names = "usart";
 				status = "disabled";
@@ -880,6 +893,9 @@
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
+				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
 				clocks = <&usart1_clk>;
 				clock-names = "usart";
 				status = "disabled";
@@ -891,6 +907,9 @@
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
 				clocks = <&usart2_clk>;
 				clock-names = "usart";
 				status = "disabled";
@@ -966,7 +985,7 @@
 			adc0: adc@f804c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "atmel,at91sam9260-adc";
+				compatible = "atmel,at91sam9x5-adc";
 				reg = <0xf804c000 0x100>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&adc_clk>,
diff --git a/src/arm/at91sam9x5_can.dtsi b/src/arm/at91sam9x5_can.dtsi
index f44ab7702a12..8eb2f9c1b978 100644
--- a/src/arm/at91sam9x5_can.dtsi
+++ b/src/arm/at91sam9x5_can.dtsi
@@ -1,5 +1,5 @@
 /*
- * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
  * Ethernet interface.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
@@ -20,10 +20,50 @@
 						reg = <29>;
 					};
 
-                                        can1_clk: can1_clk {
-                                                #clock-cells = <0>;
-                                                reg = <30>;
-                                        };
+					can1_clk: can1_clk {
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+				};
+			};
+
+			can0: can@f8000000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8000000 0x300>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_rx_tx>;
+				clocks = <&can0_clk>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			can1: can@f8004000 {
+				compatible = "atmel,at91sam9x5-can";
+				reg = <0xf8004000 0x300>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_rx_tx>;
+				clocks = <&can1_clk>;
+				clock-names = "can_clk";
+				status = "disabled";
+			};
+
+			pinctrl@fffff400 {
+				can0 {
+					pinctrl_can0_rx_tx: can0_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0, conflicts with DRXD */
+							AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX0, conflicts with DTXD */
+					};
+				};
+
+				can1 {
+					pinctrl_can1_rx_tx: can1_rx_tx {
+						atmel,pins =
+							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1, conflicts with RXD1 */
+							AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX1, conflicts with TXD1 */
+					};
 				};
 			};
 		};
diff --git a/src/arm/at91sam9x5_usart3.dtsi b/src/arm/at91sam9x5_usart3.dtsi
index 140217a54384..43bb5b51caa6 100644
--- a/src/arm/at91sam9x5_usart3.dtsi
+++ b/src/arm/at91sam9x5_usart3.dtsi
@@ -57,6 +57,9 @@
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
+				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
+				       <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
 				clocks = <&usart3_clk>;
 				clock-names = "usart";
 				status = "disabled";
diff --git a/src/arm/at91sam9x5ek.dtsi b/src/arm/at91sam9x5ek.dtsi
index 3a9f6fa4a36a..bd16bd360272 100644
--- a/src/arm/at91sam9x5ek.dtsi
+++ b/src/arm/at91sam9x5ek.dtsi
@@ -53,6 +53,8 @@
 			};
 
 			usb2: gadget@f803c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_board_usb2>;
 				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -80,6 +82,13 @@
 							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
 					};
 				};
+
+				usb2 {
+					pinctrl_board_usb2: usb2-board {
+						atmel,pins =
+							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
+					};
+				};
 			};
 
 			spi0: spi@f0000000 {
diff --git a/src/arm/at91sam9xe.dtsi b/src/arm/at91sam9xe.dtsi
new file mode 100644
index 000000000000..0278f63b2daf
--- /dev/null
+++ b/src/arm/at91sam9xe.dtsi
@@ -0,0 +1,60 @@
+/*
+ * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9XE family SoC";
+	compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
+
+	sram0: sram@002ff000 {
+		status = "disabled";
+	};
+
+	sram1: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x4000>;
+	};
+};
diff --git a/src/arm/atlas6-evb.dts b/src/arm/atlas6-evb.dts
new file mode 100644
index 000000000000..ab042ca8dea1
--- /dev/null
+++ b/src/arm/atlas6-evb.dts
@@ -0,0 +1,78 @@
+/*
+ * DTS file for CSR SiRFatlas6 Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "atlas6.dtsi"
+
+/ {
+	model = "CSR SiRFatlas6 Evaluation Board";
+	compatible = "sirf,atlas6-cb", "sirf,atlas6";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	axi {
+		peri-iobg {
+			uart@b0060000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins_a>;
+			};
+			spi@b00d0000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_pins_a>;
+				spi@0 {
+					compatible = "spidev";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+			spi@b0170000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins_a>;
+			};
+			i2c0: i2c@b00e0000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				lcd@40 {
+					compatible = "sirf,lcd";
+					reg = <0x40>;
+				};
+			};
+
+		};
+		disp-iobg {
+			lcd@90010000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcd_24pins_a>;
+			};
+		};
+	};
+	display: display@0 {
+	    panels {
+		panel0: panel@0 {
+			panel-name = "Innolux TFT";
+			hactive = <800>;
+			vactive = <480>;
+			left_margin = <20>;
+			right_margin = <234>;
+			upper_margin = <3>;
+			lower_margin = <41>;
+			hsync_len = <3>;
+			vsync_len = <2>;
+			pixclock = <33264000>;
+			sync = <3>;
+			timing = <0x88>;
+			};
+	    };
+	};
+};
diff --git a/src/arm/atlas6.dtsi b/src/arm/atlas6.dtsi
new file mode 100644
index 000000000000..29598667420b
--- /dev/null
+++ b/src/arm/atlas6.dtsi
@@ -0,0 +1,802 @@
+/*
+ * DTS file for CSR SiRFatlas6 SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+	compatible = "sirf,atlas6";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* from bootloader */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			clocks = <&clks 12>;
+			operating-points = <
+				/* kHz    uV */
+				200000  1025000
+				400000  1025000
+				600000  1050000
+				800000  1100000
+			>;
+			clock-latency = <150000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <29>;
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x80000000>;
+
+		intc: interrupt-controller@80020000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "sirf,prima2-intc";
+			reg = <0x80020000 0x1000>;
+		};
+
+		sys-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x88000000 0x88000000 0x40000>;
+
+			clks: clock-controller@88000000 {
+				compatible = "sirf,atlas6-clkc";
+				reg = <0x88000000 0x1000>;
+				interrupts = <3>;
+				#clock-cells = <1>;
+			};
+
+			rstc: reset-controller@88010000 {
+				compatible = "sirf,prima2-rstc";
+				reg = <0x88010000 0x1000>;
+				#reset-cells = <1>;
+			};
+
+			rsc-controller@88020000 {
+				compatible = "sirf,prima2-rsc";
+				reg = <0x88020000 0x1000>;
+			};
+
+			cphifbg@88030000 {
+				compatible = "sirf,prima2-cphifbg";
+				reg = <0x88030000 0x1000>;
+				clocks = <&clks 42>;
+			};
+		};
+
+		mem-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90000000 0x90000000 0x10000>;
+
+			memory-controller@90000000 {
+				compatible = "sirf,prima2-memc";
+				reg = <0x90000000 0x2000>;
+				interrupts = <27>;
+				clocks = <&clks 5>;
+			};
+
+			memc-monitor {
+				compatible = "sirf,prima2-memcmon";
+				reg = <0x90002000 0x200>;
+				interrupts = <4>;
+				clocks = <&clks 32>;
+			};
+		};
+
+		disp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90010000 0x90010000 0x30000>;
+
+			lcd@90010000 {
+				compatible = "sirf,prima2-lcd";
+				reg = <0x90010000 0x20000>;
+				interrupts = <30>;
+				clocks = <&clks 34>;
+				display=<&display>;
+				/* later transfer to pwm */
+				bl-gpio = <&gpio 7 0>;
+				default-panel = <&panel0>;
+			};
+
+			vpp@90020000 {
+				compatible = "sirf,prima2-vpp";
+				reg = <0x90020000 0x10000>;
+				interrupts = <31>;
+				clocks = <&clks 35>;
+				resets = <&rstc 6>;
+			};
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x98000000 0x98000000 0x8000000>;
+
+			graphics@98000000 {
+				compatible = "powervr,sgx510";
+				reg = <0x98000000 0x8000000>;
+				interrupts = <6>;
+				clocks = <&clks 32>;
+			};
+		};
+
+		graphics2d-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+			ble@a0000000 {
+				compatible = "sirf,atlas6-ble";
+				reg = <0xa0000000 0x2000>;
+				interrupts = <5>;
+				clocks = <&clks 33>;
+			};
+		};
+
+		dsp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa8000000 0xa8000000 0x2000000>;
+
+			dspif@a8000000 {
+				compatible = "sirf,prima2-dspif";
+				reg = <0xa8000000 0x10000>;
+				interrupts = <9>;
+				resets = <&rstc 1>;
+			};
+
+			gps@a8010000 {
+				compatible = "sirf,prima2-gps";
+				reg = <0xa8010000 0x10000>;
+				interrupts = <7>;
+				clocks = <&clks 9>;
+				resets = <&rstc 2>;
+			};
+
+			dsp@a9000000 {
+				compatible = "sirf,prima2-dsp";
+				reg = <0xa9000000 0x1000000>;
+				interrupts = <8>;
+				clocks = <&clks 8>;
+				resets = <&rstc 0>;
+			};
+		};
+
+		peri-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0xb0000000 0x180000>,
+			       <0x56000000 0x56000000 0x1b00000>;
+
+			timer@b0020000 {
+				compatible = "sirf,prima2-tick";
+				reg = <0xb0020000 0x1000>;
+				interrupts = <0>;
+				clocks = <&clks 11>;
+			};
+
+			nand@b0030000 {
+				compatible = "sirf,prima2-nand";
+				reg = <0xb0030000 0x10000>;
+				interrupts = <41>;
+				clocks = <&clks 26>;
+			};
+
+			audio@b0040000 {
+				compatible = "sirf,prima2-audio";
+				reg = <0xb0040000 0x10000>;
+				interrupts = <35>;
+				clocks = <&clks 27>;
+			};
+
+			uart0: uart@b0050000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0050000 0x1000>;
+				interrupts = <17>;
+				fifosize = <128>;
+				clocks = <&clks 13>;
+				dmas = <&dmac1 5>, <&dmac0 2>;
+				dma-names = "rx", "tx";
+			};
+
+			uart1: uart@b0060000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0060000 0x1000>;
+				interrupts = <18>;
+				fifosize = <32>;
+				clocks = <&clks 14>;
+				dma-names = "no-rx", "no-tx";
+			};
+
+			uart2: uart@b0070000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0070000 0x1000>;
+				interrupts = <19>;
+				fifosize = <128>;
+				clocks = <&clks 15>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
+			};
+
+			usp0: usp@b0080000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0080000 0x10000>;
+				interrupts = <20>;
+				fifosize = <128>;
+				clocks = <&clks 28>;
+				dmas = <&dmac1 1>, <&dmac1 2>;
+				dma-names = "rx", "tx";
+			};
+
+			usp1: usp@b0090000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0090000 0x10000>;
+				interrupts = <21>;
+				fifosize = <128>;
+				clocks = <&clks 29>;
+				dmas = <&dmac0 14>, <&dmac0 15>;
+				dma-names = "rx", "tx";
+			};
+
+			dmac0: dma-controller@b00b0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb00b0000 0x10000>;
+				interrupts = <12>;
+				clocks = <&clks 24>;
+				#dma-cells = <1>;
+			};
+
+			dmac1: dma-controller@b0160000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb0160000 0x10000>;
+				interrupts = <13>;
+				clocks = <&clks 25>;
+				#dma-cells = <1>;
+			};
+
+			vip@b00C0000 {
+				compatible = "sirf,prima2-vip";
+				reg = <0xb00C0000 0x10000>;
+				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
+			};
+
+			spi0: spi@b00d0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb00d0000 0x10000>;
+				interrupts = <15>;
+				sirf,spi-num-chipselects = <1>;
+				dmas = <&dmac1 9>,
+				     <&dmac1 4>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 19>;
+				resets = <&rstc 26>;
+				status = "disabled";
+			};
+
+			spi1: spi@b0170000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb0170000 0x10000>;
+				interrupts = <16>;
+				sirf,spi-num-chipselects = <1>;
+				dmas = <&dmac0 12>,
+				     <&dmac0 13>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 20>;
+				resets = <&rstc 27>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@b00e0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00e0000 0x10000>;
+				interrupts = <24>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 17>;
+			};
+
+			i2c1: i2c@b00f0000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00f0000 0x10000>;
+				interrupts = <25>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 18>;
+			};
+
+			tsc@b0110000 {
+				compatible = "sirf,prima2-tsc";
+				reg = <0xb0110000 0x10000>;
+				interrupts = <33>;
+				clocks = <&clks 16>;
+			};
+
+			gpio: pinctrl@b0120000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,atlas6-pinctrl";
+				reg = <0xb0120000 0x10000>;
+				interrupts = <43 44 45 46 47>;
+				gpio-controller;
+				interrupt-controller;
+
+				lcd_16pins_a: lcd0@0 {
+					lcd {
+						sirf,pins = "lcd_16bitsgrp";
+						sirf,function = "lcd_16bits";
+					};
+				};
+				lcd_18pins_a: lcd0@1 {
+					lcd {
+						sirf,pins = "lcd_18bitsgrp";
+						sirf,function = "lcd_18bits";
+					};
+				};
+				lcd_24pins_a: lcd0@2 {
+					lcd {
+						sirf,pins = "lcd_24bitsgrp";
+						sirf,function = "lcd_24bits";
+					};
+				};
+				lcdrom_pins_a: lcdrom0@0 {
+					lcd {
+						sirf,pins = "lcdromgrp";
+						sirf,function = "lcdrom";
+					};
+				};
+				uart0_pins_a: uart0@0 {
+					uart {
+						sirf,pins = "uart0grp";
+						sirf,function = "uart0";
+					};
+				};
+				uart0_noflow_pins_a: uart0@1 {
+					uart {
+						sirf,pins = "uart0_nostreamctrlgrp";
+						sirf,function = "uart0_nostreamctrl";
+					};
+				};
+				uart1_pins_a: uart1@0 {
+					uart {
+						sirf,pins = "uart1grp";
+						sirf,function = "uart1";
+					};
+				};
+				uart2_pins_a: uart2@0 {
+					uart {
+						sirf,pins = "uart2grp";
+						sirf,function = "uart2";
+					};
+				};
+				uart2_noflow_pins_a: uart2@1 {
+					uart {
+						sirf,pins = "uart2_nostreamctrlgrp";
+						sirf,function = "uart2_nostreamctrl";
+					};
+				};
+				spi0_pins_a: spi0@0 {
+					spi {
+						sirf,pins = "spi0grp";
+						sirf,function = "spi0";
+					};
+				};
+				spi1_pins_a: spi1@0 {
+					spi {
+						sirf,pins = "spi1grp";
+						sirf,function = "spi1";
+					};
+				};
+				i2c0_pins_a: i2c0@0 {
+					i2c {
+						sirf,pins = "i2c0grp";
+						sirf,function = "i2c0";
+					};
+				};
+				i2c1_pins_a: i2c1@0 {
+					i2c {
+						sirf,pins = "i2c1grp";
+						sirf,function = "i2c1";
+					};
+				};
+                                pwm0_pins_a: pwm0@0 {
+                                        pwm {
+                                                sirf,pins = "pwm0grp";
+                                                sirf,function = "pwm0";
+                                        };
+                                };
+                                pwm1_pins_a: pwm1@0 {
+                                        pwm {
+                                                sirf,pins = "pwm1grp";
+                                                sirf,function = "pwm1";
+                                        };
+                                };
+                                pwm2_pins_a: pwm2@0 {
+                                        pwm {
+                                                sirf,pins = "pwm2grp";
+                                                sirf,function = "pwm2";
+                                        };
+                                };
+                                pwm3_pins_a: pwm3@0 {
+                                        pwm {
+                                                sirf,pins = "pwm3grp";
+                                                sirf,function = "pwm3";
+                                        };
+                                };
+				pwm4_pins_a: pwm4@0 {
+                                        pwm {
+                                                sirf,pins = "pwm4grp";
+                                                sirf,function = "pwm4";
+                                        };
+                                };
+                                gps_pins_a: gps@0 {
+                                        gps {
+                                                sirf,pins = "gpsgrp";
+                                                sirf,function = "gps";
+                                        };
+                                };
+                                vip_pins_a: vip@0 {
+                                        vip {
+                                                sirf,pins = "vipgrp";
+                                                sirf,function = "vip";
+                                        };
+                                };
+                                sdmmc0_pins_a: sdmmc0@0 {
+                                        sdmmc0 {
+                                                sirf,pins = "sdmmc0grp";
+                                                sirf,function = "sdmmc0";
+                                        };
+                                };
+                                sdmmc1_pins_a: sdmmc1@0 {
+                                        sdmmc1 {
+                                                sirf,pins = "sdmmc1grp";
+                                                sirf,function = "sdmmc1";
+                                        };
+                                };
+                                sdmmc2_pins_a: sdmmc2@0 {
+                                        sdmmc2 {
+                                                sirf,pins = "sdmmc2grp";
+                                                sirf,function = "sdmmc2";
+                                        };
+                                };
+				sdmmc2_nowp_pins_a: sdmmc2_nowp@0 {
+                                        sdmmc2_nowp {
+                                                sirf,pins = "sdmmc2_nowpgrp";
+                                                sirf,function = "sdmmc2_nowp";
+                                        };
+                                };
+                                sdmmc3_pins_a: sdmmc3@0 {
+                                        sdmmc3 {
+                                                sirf,pins = "sdmmc3grp";
+                                                sirf,function = "sdmmc3";
+                                        };
+                                };
+                                sdmmc5_pins_a: sdmmc5@0 {
+                                        sdmmc5 {
+                                                sirf,pins = "sdmmc5grp";
+                                                sirf,function = "sdmmc5";
+                                        };
+                                };
+				i2s_mclk_pins_a: i2s_mclk@0 {
+                                        i2s_mclk {
+                                                sirf,pins = "i2smclkgrp";
+                                                sirf,function = "i2s_mclk";
+                                        };
+                                };
+				i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 {
+                                        i2s_ext_clk_input {
+                                                sirf,pins = "i2s_ext_clk_inputgrp";
+                                                sirf,function = "i2s_ext_clk_input";
+                                        };
+                                };
+                                i2s_pins_a: i2s@0 {
+                                        i2s {
+                                                sirf,pins = "i2sgrp";
+                                                sirf,function = "i2s";
+                                        };
+                                };
+				i2s_no_din_pins_a: i2s_no_din@0 {
+                                        i2s_no_din {
+                                                sirf,pins = "i2s_no_dingrp";
+                                                sirf,function = "i2s_no_din";
+                                        };
+                                };
+				i2s_6chn_pins_a: i2s_6chn@0 {
+                                        i2s_6chn {
+                                                sirf,pins = "i2s_6chngrp";
+                                                sirf,function = "i2s_6chn";
+                                        };
+                                };
+                                ac97_pins_a: ac97@0 {
+                                        ac97 {
+                                                sirf,pins = "ac97grp";
+                                                sirf,function = "ac97";
+                                        };
+                                };
+                                nand_pins_a: nand@0 {
+                                        nand {
+                                                sirf,pins = "nandgrp";
+                                                sirf,function = "nand";
+                                        };
+                                };
+                                usp0_pins_a: usp0@0 {
+                                        usp0 {
+                                                sirf,pins = "usp0grp";
+                                                sirf,function = "usp0";
+                                        };
+                                };
+				usp0_uart_nostreamctrl_pins_a: usp0@1 {
+                                        usp0 {
+                                                sirf,pins = "usp0_uart_nostreamctrl_grp";
+                                                sirf,function = "usp0_uart_nostreamctrl";
+                                        };
+                                };
+				usp0_only_utfs_pins_a: usp0@2 {
+					usp0 {
+						sirf,pins = "usp0_only_utfs_grp";
+						sirf,function = "usp0_only_utfs";
+					};
+				};
+				usp0_only_urfs_pins_a: usp0@3 {
+					usp0 {
+						sirf,pins = "usp0_only_urfs_grp";
+						sirf,function = "usp0_only_urfs";
+					};
+				};
+                                usp1_pins_a: usp1@0 {
+                                        usp1 {
+                                                sirf,pins = "usp1grp";
+                                                sirf,function = "usp1";
+                                        };
+                                };
+				usp1_uart_nostreamctrl_pins_a: usp1@1 {
+                                        usp1 {
+                                                sirf,pins = "usp1_uart_nostreamctrl_grp";
+                                                sirf,function = "usp1_uart_nostreamctrl";
+                                        };
+                                };
+                                usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 {
+                                        usb0_upli_drvbus {
+                                                sirf,pins = "usb0_upli_drvbusgrp";
+                                                sirf,function = "usb0_upli_drvbus";
+                                        };
+                                };
+                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
+                                        usb1_utmi_drvbus {
+                                                sirf,pins = "usb1_utmi_drvbusgrp";
+                                                sirf,function = "usb1_utmi_drvbus";
+                                        };
+                                };
+                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
+                                        usb1_dp_dn {
+                                                sirf,pins = "usb1_dp_dngrp";
+                                                sirf,function = "usb1_dp_dn";
+                                        };
+                                };
+                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
+                                        uart1_route_io_usb1 {
+                                                sirf,pins = "uart1_route_io_usb1grp";
+                                                sirf,function = "uart1_route_io_usb1";
+                                        };
+                                };
+                                warm_rst_pins_a: warm_rst@0 {
+                                        warm_rst {
+                                                sirf,pins = "warm_rstgrp";
+                                                sirf,function = "warm_rst";
+                                        };
+                                };
+                                pulse_count_pins_a: pulse_count@0 {
+                                        pulse_count {
+                                                sirf,pins = "pulse_countgrp";
+                                                sirf,function = "pulse_count";
+                                        };
+                                };
+                                cko0_pins_a: cko0@0 {
+                                        cko0 {
+                                                sirf,pins = "cko0grp";
+                                                sirf,function = "cko0";
+                                        };
+                                };
+                                cko1_pins_a: cko1@0 {
+                                        cko1 {
+                                                sirf,pins = "cko1grp";
+                                                sirf,function = "cko1";
+                                        };
+                                };
+			};
+
+			pwm@b0130000 {
+				compatible = "sirf,prima2-pwm";
+				reg = <0xb0130000 0x10000>;
+				clocks = <&clks 21>;
+			};
+
+			efusesys@b0140000 {
+				compatible = "sirf,prima2-efuse";
+				reg = <0xb0140000 0x10000>;
+				clocks = <&clks 22>;
+			};
+
+			pulsec@b0150000 {
+				compatible = "sirf,prima2-pulsec";
+				reg = <0xb0150000 0x10000>;
+				interrupts = <48>;
+				clocks = <&clks 23>;
+			};
+
+			pci-iobg {
+				compatible = "sirf,prima2-pciiobg", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x56000000 0x56000000 0x1b00000>;
+
+				sd0: sdhci@56000000 {
+					cell-index = <0>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56000000 0x100000>;
+					interrupts = <38>;
+					bus-width = <8>;
+					clocks = <&clks 36>;
+				};
+
+				sd1: sdhci@56100000 {
+					cell-index = <1>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56100000 0x100000>;
+					interrupts = <38>;
+					status = "disabled";
+					bus-width = <4>;
+					clocks = <&clks 36>;
+				};
+
+				sd2: sdhci@56200000 {
+					cell-index = <2>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56200000 0x100000>;
+					interrupts = <23>;
+					status = "disabled";
+					bus-width = <4>;
+					clocks = <&clks 37>;
+				};
+
+				sd3: sdhci@56300000 {
+					cell-index = <3>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56300000 0x100000>;
+					interrupts = <23>;
+					status = "disabled";
+					bus-width = <4>;
+					clocks = <&clks 37>;
+				};
+
+				sd5: sdhci@56500000 {
+					cell-index = <5>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56500000 0x100000>;
+					interrupts = <39>;
+					status = "disabled";
+					bus-width = <4>;
+					clocks = <&clks 38>;
+				};
+
+				pci-copy@57900000 {
+					compatible = "sirf,prima2-pcicp";
+					reg = <0x57900000 0x100000>;
+					interrupts = <40>;
+				};
+
+				rom-interface@57a00000 {
+					compatible = "sirf,prima2-romif";
+					reg = <0x57a00000 0x100000>;
+				};
+			};
+		};
+
+		rtc-iobg {
+			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80030000 0x10000>;
+
+			gpsrtc@1000 {
+				compatible = "sirf,prima2-gpsrtc";
+				reg = <0x1000 0x1000>;
+				interrupts = <55 56 57>;
+			};
+
+			sysrtc@2000 {
+				compatible = "sirf,prima2-sysrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <52 53 54>;
+			};
+
+			minigpsrtc@2000 {
+				compatible = "sirf,prima2-minigpsrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <54>;
+			};
+
+			pwrc@3000 {
+				compatible = "sirf,prima2-pwrc";
+				reg = <0x3000 0x1000>;
+				interrupts = <32>;
+			};
+		};
+
+		uus-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb8000000 0xb8000000 0x40000>;
+
+			usb0: usb@b00e0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8000000 0x10000>;
+				interrupts = <10>;
+				clocks = <&clks 40>;
+			};
+
+			usb1: usb@b00f0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8010000 0x10000>;
+				interrupts = <11>;
+				clocks = <&clks 41>;
+			};
+
+			security@b00f0000 {
+				compatible = "sirf,prima2-security";
+				reg = <0xb8030000 0x10000>;
+				interrupts = <42>;
+				clocks = <&clks 7>;
+			};
+		};
+	};
+};
diff --git a/src/arm/atlas7-evb.dts b/src/arm/atlas7-evb.dts
new file mode 100644
index 000000000000..49cf59a95572
--- /dev/null
+++ b/src/arm/atlas7-evb.dts
@@ -0,0 +1,110 @@
+/*
+ * DTS file for CSR SiRFatlas7 Evaluation Board
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "atlas7.dtsi"
+
+/ {
+	model = "CSR SiRFatlas7 Evaluation Board";
+	compatible = "sirf,atlas7-cb", "sirf,atlas7";
+
+	chosen {
+		bootargs = "console=ttySiRF1,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vpp_reserved: vpp_mem@5e800000 {
+			compatible = "sirf,reserved-memory";
+			reg = <0x5e800000 0x800000>;
+		};
+
+		nanddisk_reserved: nanddisk@46000000 {
+			reg = <0x46000000 0x200000>;
+			no-map;
+		};
+	};
+
+
+	noc {
+		mediam {
+			nand@17050000 {
+				memory-region = <&nanddisk_reserved>;
+			};
+		};
+
+		gnssm {
+			spi1: spi@18200000 {
+				status = "okay";
+				spiflash: macronix@0{
+					status = "okay";
+					compatible = "macronix,mx25l6405d";
+					reg = <0>;
+					spi-max-frequency = <37500000>;
+					spi-cpha;
+					spi-cpol;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partitions@0 {
+						label = "myspiboot";
+						reg = <0x0 0x800000>;
+					};
+				};
+			};
+		};
+
+		btm {
+			uart6: uart@11000000 {
+				status = "okay";
+				sirf,uart-has-rtscts;
+			};
+		};
+
+		disp-iobg {
+			vpp@13110000 {
+				memory-region = <&vpp_reserved>;
+			};
+		};
+
+		display0: display@0 {
+			compatible = "lvds-panel";
+			source = "lvds.0";
+
+			bl-gpios = <&gpio_1 63 0>;
+			data-lines  = <24>;
+
+			display-timings {
+				native-mode = <&timing0>;
+				timing0: timing0 {
+					clock-frequency = <60000000>;
+					hactive = <1024>;
+					vactive = <600>;
+					hfront-porch = <220>;
+					hback-porch = <100>;
+					hsync-len = <1>;
+					vback-porch = <10>;
+					vfront-porch = <25>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <1>;
+					pixelclk-active = <1>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/atlas7.dtsi b/src/arm/atlas7.dtsi
new file mode 100644
index 000000000000..a753178abc85
--- /dev/null
+++ b/src/arm/atlas7.dtsi
@@ -0,0 +1,813 @@
+/*
+ * DTS file for CSR SiRFatlas7 SoC
+ *
+ * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+	compatible = "sirf,atlas7";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart6;
+		serial9 = &usp2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+		};
+	};
+
+	noc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x10000000 0x10000000 0xc0000000>;
+
+		gic: interrupt-controller@10301000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x10301000 0x1000>,
+			     <0x10302000 0x0100>;
+		};
+
+		pmu_regulator: pmu_regulator@10E30020 {
+			compatible = "sirf,atlas7-pmu-ldo";
+			reg = <0x10E30020 0x4>;
+			ldo: ldo {
+				regulator-name = "ldo";
+			};
+		};
+
+		atlas7_codec: atlas7_codec@10E30000 {
+			#sound-dai-cells = <0>;
+			compatible = "sirf,atlas7-codec";
+			reg = <0x10E30000 0x400>;
+			clocks = <&car 62>;
+			ldo-supply = <&ldo>;
+		};
+
+		atlas7_iacc: atlas7_iacc@10D01000 {
+			#sound-dai-cells = <0>;
+			compatible = "sirf,atlas7-iacc";
+			reg = <0x10D01000 0x100>;
+			dmas = <&dmac3 0>, <&dmac3 7>, <&dmac3 8>,
+				<&dmac3 3>, <&dmac3 9>;
+			dma-names = "rx", "tx0", "tx1", "tx2", "tx3";
+			clocks = <&car 62>;
+		};
+
+		ipc@13240000 {
+			compatible = "sirf,atlas7-ipc";
+			ranges = <0x13240000 0x13240000 0x00010000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			hwspinlock {
+				compatible = "sirf,hwspinlock";
+				reg = <0x13240000 0x00010000>;
+
+				num-spinlocks = <30>;
+			};
+
+			ns_m3_rproc@0 {
+				compatible = "sirf,ns2m30-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 123 0>;
+			};
+
+			ns_m3_rproc@1 {
+				compatible = "sirf,ns2m31-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 126 0>;
+			};
+
+			ns_kal_rproc@0 {
+				compatible = "sirf,ns2kal0-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 124 0>;
+			};
+
+			ns_kal_rproc@1 {
+				compatible = "sirf,ns2kal1-rproc";
+				reg = <0x13240000 0x00010000>;
+				interrupts = <0 127 0>;
+			};
+		};
+
+		pinctrl: ioc@18880000 {
+			compatible = "sirf,atlas7-ioc";
+			reg = <0x18880000 0x1000>,
+				<0x10E40000 0x1000>;
+		};
+
+		pmipc {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13240000 0x13240000 0x00010000>;
+			pmipc@0x13240000 {
+				compatible = "sirf,atlas7-pmipc";
+				reg = <0x13240000 0x00010000>;
+			};
+		};
+
+		dramfw {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10830000 0x10830000 0x18000>;
+			dramfw@10820000 {
+				compatible = "sirf,nocfw-dramfw";
+				reg = <0x10830000 0x18000>;
+			};
+		};
+
+		spramfw {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10250000 0x10250000 0x3000>;
+			spramfw@10820000 {
+				compatible = "sirf,nocfw-spramfw";
+				reg = <0x10250000 0x3000>;
+			};
+		};
+
+		cpum {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10200000 0x10200000 0x3000>;
+			cpum@10200000 {
+				compatible = "sirf,nocfw-cpum";
+				reg = <0x10200000 0x3000>;
+			};
+		};
+
+		cgum {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x18641000 0x18641000 0x3000>,
+					 <0x18620000 0x18620000 0x1000>;
+
+			cgum@18641000 {
+				compatible = "sirf,nocfw-cgum";
+				reg = <0x18641000 0x3000>;
+			};
+
+			car: clock-controller@18620000 {
+				compatible = "sirf,atlas7-car";
+				reg = <0x18620000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+		};
+
+		gnssm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x18000000 0x18000000 0x0000ffff>,
+				<0x18010000 0x18010000 0x1000>,
+				<0x18020000 0x18020000 0x1000>,
+				<0x18030000 0x18030000 0x1000>,
+				<0x18040000 0x18040000 0x1000>,
+				<0x18050000 0x18050000 0x1000>,
+				<0x18060000 0x18060000 0x1000>,
+				<0x18100000 0x18100000 0x3000>,
+				<0x18250000 0x18250000 0x10000>,
+				<0x18200000 0x18200000 0x1000>;
+
+			dmac0: dma-controller@18000000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x18000000 0x1000>;
+				interrupts = <0 12 0>;
+				clocks = <&car 89>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+
+			gnssmfw@0x18100000 {
+				compatible = "sirf,nocfw-gnssm";
+				reg = <0x18100000 0x3000>;
+			};
+
+			uart0: uart@18010000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18010000 0x1000>;
+				interrupts = <0 17 0>;
+				clocks = <&car 90>;
+				fifosize = <128>;
+				dmas = <&dmac0 3>, <&dmac0 2>;
+				dma-names = "rx", "tx";
+			};
+
+			uart1: uart@18020000 {
+				cell-index = <1>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18020000 0x1000>;
+				interrupts = <0 18 0>;
+				clocks = <&car 88>;
+				fifosize = <32>;
+			};
+
+			uart2: uart@18030000 {
+				cell-index = <2>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18030000 0x1000>;
+				interrupts = <0 19 0>;
+				clocks = <&car 91>;
+				fifosize = <128>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			uart3: uart@18040000 {
+				cell-index = <3>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18040000 0x1000>;
+				interrupts = <0 66 0>;
+				clocks = <&car 92>;
+				fifosize = <128>;
+				dmas = <&dmac0 4>, <&dmac0 5>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			uart4: uart@18050000 {
+				cell-index = <4>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18050000 0x1000>;
+				interrupts = <0 69 0>;
+				clocks = <&car 93>;
+				fifosize = <128>;
+				dmas = <&dmac0 0>, <&dmac0 1>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			uart5: uart@18060000 {
+				cell-index = <5>;
+				compatible = "sirf,atlas7-uart";
+				reg = <0x18060000 0x1000>;
+				interrupts = <0 71 0>;
+				clocks = <&car 94>;
+				fifosize = <128>;
+				dmas = <&dmac0 8>, <&dmac0 9>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+			dspub@18250000 {
+				compatible = "dx,cc44p";
+				reg = <0x18250000 0x10000>;
+				interrupts = <0 27 0>;
+			};
+
+			spi1: spi@18200000 {
+				compatible = "sirf,prima2-spi";
+				reg = <0x18200000 0x1000>;
+				interrupts = <0 16 0>;
+				clocks = <&car 95>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				dmas = <&dmac0 12>, <&dmac0 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+		};
+
+
+		gpum {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13000000 0x13000000 0x3000>;
+			gpum@0x13000000 {
+				compatible = "sirf,nocfw-gpum";
+				reg = <0x13000000 0x3000>;
+			};
+		};
+
+		mediam {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x16000000 0x16000000 0x00200000>,
+				<0x17020000 0x17020000 0x1000>,
+				<0x17030000 0x17030000 0x1000>,
+				<0x17040000 0x17040000 0x1000>,
+				<0x17050000 0x17050000 0x10000>,
+				<0x17060000 0x17060000 0x200>,
+				<0x17060200 0x17060200 0x100>,
+				<0x17070000 0x17070000 0x200>,
+				<0x17070200 0x17070200 0x100>,
+				<0x170A0000 0x170A0000 0x3000>;
+
+			mediam@170A0000 {
+				compatible = "sirf,nocfw-mediam";
+				reg = <0x170A0000 0x3000>;
+			};
+
+			gpio_0: gpio_mediam@17040000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,atlas7-gpio";
+				reg = <0x17040000 0x1000>;
+				interrupts = <0 13 0>, <0 14 0>;
+				clocks = <&car 107>;
+				clock-names = "gpio0_io";
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			nand@17050000 {
+				compatible = "sirf,atlas7-nand";
+				reg = <0x17050000 0x10000>;
+				interrupts = <0 41 0>;
+				clocks = <&car 108>, <&car 112>;
+				clock-names = "nand_io", "nand_nand";
+			};
+
+			sd0: sdhci@16000000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x16000000 0x100000>;
+				interrupts = <0 38 0>;
+				clocks = <&car 109>, <&car 111>;
+				clock-names = "core", "iface";
+				wp-inverted;
+				non-removable;
+				status = "disabled";
+				bus-width = <8>;
+			};
+
+			sd1: sdhci@16100000 {
+				cell-index = <1>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x16100000 0x100000>;
+				interrupts = <0 38 0>;
+				clocks = <&car 109>, <&car 111>;
+				clock-names = "core", "iface";
+				non-removable;
+				status = "disabled";
+				bus-width = <8>;
+			};
+
+			usb0: usb@17060000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-usb";
+				reg = <0x17060000 0x200>;
+				interrupts = <0 10 0>;
+				clocks = <&car 113>;
+				sirf,usbphy = <&usbphy0>;
+				phy_type = "utmi";
+				dr_mode = "otg";
+				maximum-speed = "high-speed";
+				status = "okay";
+			};
+
+			usb1: usb@17070000 {
+				cell-index = <1>;
+				compatible = "sirf,atlas7-usb";
+				reg = <0x17070000 0x200>;
+				interrupts = <0 11 0>;
+				clocks = <&car 114>;
+				sirf,usbphy = <&usbphy1>;
+				phy_type = "utmi";
+				dr_mode = "host";
+				maximum-speed = "high-speed";
+				status = "okay";
+			};
+
+			usbphy0: usbphy@0 {
+				compatible = "sirf,atlas7-usbphy";
+				reg = <0x17060200 0x100>;
+				clocks = <&car 115>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@1 {
+				compatible = "sirf,atlas7-usbphy";
+				reg = <0x17070200 0x100>;
+				clocks = <&car 116>;
+				status = "okay";
+			};
+
+			i2c0: i2c@17020000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0x17020000 0x1000>;
+				interrupts = <0 24 0>;
+				clocks = <&car 105>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+		};
+
+		vdifm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13290000 0x13290000 0x3000>,
+				<0x13300000 0x13300000 0x1000>,
+				<0x14200000 0x14200000 0x600000>;
+
+			vdifm@13290000 {
+				compatible = "sirf,nocfw-vdifm";
+				reg = <0x13290000 0x3000>;
+			};
+
+			gpio_1: gpio_vdifm@13300000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,atlas7-gpio";
+				reg = <0x13300000 0x1000>;
+				interrupts = <0 43 0>, <0 44 0>, <0 45 0>;
+				clocks = <&car 84>;
+				clock-names = "gpio1_io";
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			sd2: sdhci@14200000 {
+				cell-index = <2>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14200000 0x100000>;
+				interrupts = <0 23 0>;
+				clocks = <&car 70>, <&car 75>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+				sd-uhs-sdr50;
+				vqmmc-supply = <&vqmmc>;
+				vqmmc: vqmmc@2 {
+					regulator-min-microvolt = <1650000>;
+					regulator-max-microvolt = <1950000>;
+					regulator-name = "vqmmc-ldo";
+					regulator-type = "voltage";
+					regulator-boot-on;
+					regulator-allow-bypass;
+				};
+			};
+
+			sd3: sdhci@14300000 {
+				cell-index = <3>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14300000 0x100000>;
+				interrupts = <0 23 0>;
+				clocks = <&car 76>, <&car 81>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+			};
+
+			sd5: sdhci@14500000 {
+				cell-index = <5>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14500000 0x100000>;
+				interrupts = <0 39 0>;
+				clocks = <&car 71>, <&car 76>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+				loop-dma;
+			};
+
+			sd6: sdhci@14600000 {
+				cell-index = <6>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14600000 0x100000>;
+				interrupts = <0 98 0>;
+				clocks = <&car 72>, <&car 77>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+			};
+
+			sd7: sdhci@14700000 {
+				cell-index = <7>;
+				compatible = "sirf,atlas7-sdhc";
+				reg = <0x14700000 0x100000>;
+				interrupts = <0 98 0>;
+				clocks = <&car 72>, <&car 77>;
+				clock-names = "core", "iface";
+				status = "disabled";
+				bus-width = <4>;
+			};
+		};
+
+		audiom {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10d50000 0x10d50000 0x0000ffff>,
+					<0x10d60000 0x10d60000 0x0000ffff>,
+					<0x10d80000 0x10d80000 0x0000ffff>,
+					<0x10d90000 0x10d90000 0x0000ffff>,
+					<0x10ED0000 0x10ED0000 0x3000>,
+					<0x10dc8000 0x10dc8000 0x1000>,
+					<0x10dc0000 0x10dc0000 0x1000>,
+					<0x10db0000 0x10db0000 0x4000>,
+					<0x10d40000 0x10d40000 0x1000>,
+					<0x10d30000 0x10d30000 0x1000>;
+
+			timer@10dc0000 {
+				compatible = "sirf,atlas7-tick";
+				reg = <0x10dc0000 0x1000>;
+				interrupts = <0 0 0>,
+					   <0 1 0>,
+					   <0 2 0>,
+					   <0 49 0>,
+					   <0 50 0>,
+					   <0 51 0>;
+				clocks = <&car 47>;
+			};
+
+			timerb@10dc8000 {
+					compatible = "sirf,atlas7-tick";
+					reg = <0x10dc8000 0x1000>;
+					interrupts = <0 74 0>,
+							   <0 75 0>,
+							   <0 76 0>,
+							   <0 77 0>,
+							   <0 78 0>,
+							   <0 79 0>;
+					clocks = <&car 47>;
+			};
+
+			vip0@10db0000 {
+				compatible = "sirf,atlas7-vip0";
+				reg = <0x10db0000 0x2000>;
+				interrupts = <0 85 0>;
+				sirf,vip_cma_size = <0xC00000>;
+			};
+
+			cvd@10db2000 {
+				compatible = "sirf,cvd";
+				reg = <0x10db2000 0x2000>;
+				clocks = <&car 46>;
+			};
+
+			dmac2: dma-controller@10d50000 {
+				cell-index = <2>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x10d50000 0xffff>;
+				interrupts = <0 55 0>;
+				clocks = <&car 60>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+
+			dmac3: dma-controller@10d60000 {
+				cell-index = <3>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x10d60000 0xffff>;
+				interrupts = <0 56 0>;
+				clocks = <&car 61>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+
+			adc: adc@10d80000 {
+				compatible = "sirf,atlas7-adc";
+				reg = <0x10d80000 0xffff>;
+				interrupts = <0 34 0>;
+				clocks = <&car 49>;
+				#io-channel-cells = <1>;
+			};
+
+			pulsec@10d90000 {
+				compatible = "sirf,prima2-pulsec";
+				reg = <0x10d90000 0xffff>;
+				interrupts = <0 42 0>;
+				clocks = <&car 54>;
+			};
+
+			audiom@10ED0000 {
+				compatible = "sirf,nocfw-audiom";
+				reg = <0x10ED0000 0x3000>;
+				interrupts = <0 102 0>;
+			};
+
+			usp1: usp@10d30000 {
+				cell-index = <1>;
+				reg = <0x10d30000 0x1000>;
+				fifosize = <512>;
+				clocks = <&car 58>;
+				dmas = <&dmac2 6>, <&dmac2 7>;
+				dma-names = "rx", "tx";
+			};
+
+			usp2: usp@10d40000 {
+				cell-index = <2>;
+				reg = <0x10d40000 0x1000>;
+				interrupts = <0 22 0>;
+				clocks = <&car 59>;
+				dmas = <&dmac2 12>, <&dmac2 13>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ddrm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x10820000 0x10820000 0x3000>,
+					<0x10800000 0x10800000 0x2000>;
+			ddrm@10820000 {
+				compatible = "sirf,nocfw-ddrm";
+				reg = <0x10820000 0x3000>;
+				interrupts = <0 105 0>;
+			};
+
+			memory-controller@0x10800000 {
+				compatible = "sirf,atlas7-memc";
+				reg = <0x10800000 0x2000>;
+			};
+
+		};
+
+		btm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x11002000 0x11002000 0x0000ffff>,
+			       <0x11010000 0x11010000 0x3000>,
+			       <0x11000000 0x11000000 0x1000>,
+			       <0x11001000 0x11001000 0x1000>;
+
+			dmac4: dma-controller@11002000 {
+				cell-index = <4>;
+				compatible = "sirf,atlas7-dmac";
+				reg = <0x11002000 0x1000>;
+				interrupts = <0 99 0>;
+				clocks = <&car 130>;
+				dma-channels = <16>;
+				#dma-cells = <1>;
+			};
+			uart6: uart@11000000 {
+				cell-index = <6>;
+				compatible = "sirf,atlas7-bt-uart",
+						"sirf,atlas7-uart";
+				reg = <0x11000000 0x1000>;
+				interrupts = <0 100 0>;
+				clocks = <&car 131>, <&car 133>, <&car 134>;
+				clock-names = "uart", "general", "noc";
+				fifosize = <128>;
+				dmas = <&dmac4 12>, <&dmac4 13>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			usp3: usp@11001000 {
+				compatible = "sirf,atlas7-bt-usp",
+					   "sirf,prima2-usp-pcm";
+				cell-index = <3>;
+				reg = <0x11001000 0x1000>;
+				fifosize = <512>;
+				clocks = <&car 132>, <&car 129>, <&car 133>,
+					<&car 134>, <&car 135>;
+				clock-names = "usp3_io", "a7ca_btss", "a7ca_io",
+					"noc_btm_io", "thbtm_io";
+				dmas = <&dmac4 0>, <&dmac4 1>;
+				dma-names = "rx", "tx";
+			};
+
+			btm@11010000 {
+				compatible = "sirf,nocfw-btm";
+				reg = <0x11010000 0x3000>;
+			};
+		};
+
+		rtcm {
+			compatible = "arteris, flexnoc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x18810000 0x18810000 0x3000>,
+				<0x18840000 0x18840000 0x1000>,
+				<0x18890000 0x18890000 0x1000>,
+				<0x188B0000 0x188B0000 0x10000>,
+				<0x188D0000 0x188D0000 0x1000>;
+			rtcm@18810000 {
+				compatible = "sirf,nocfw-rtcm";
+				reg = <0x18810000 0x3000>;
+				interrupts = <0 109 0>;
+			};
+
+			gpio_2: gpio_rtcm@18890000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,atlas7-gpio";
+				reg = <0x18890000 0x1000>;
+				interrupts = <0 47 0>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			rtc-iobg@18840000 {
+				compatible = "sirf,prima2-rtciobg",
+					"sirf-prima2-rtciobg-bus",
+					"simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x18840000 0x1000>;
+
+				sysrtc@2000 {
+					compatible = "sirf,prima2-sysrtc";
+					reg = <0x2000 0x100>;
+					interrupts = <0 52 0>;
+				};
+				pwrc@3000 {
+					compatible = "sirf,atlas7-pwrc";
+					reg = <0x3000 0x100>;
+				};
+			};
+
+			qspi: flash@188B0000 {
+				cell-index = <0>;
+				compatible = "sirf,atlas7-qspi-nor";
+				reg = <0x188B0000 0x10000>;
+				interrupts = <0 15 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			retain@0x188D0000 {
+				compatible = "sirf,atlas7-retain";
+				reg = <0x188D0000 0x1000>;
+			};
+
+		};
+		disp-iobg {
+			/* lcdc0 */
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x13100000 0x13100000 0x20000>,
+				 <0x10e10000 0x10e10000 0x10000>;
+
+			lcd@13100000 {
+				compatible = "sirf,atlas7-lcdc";
+				reg = <0x13100000 0x10000>;
+				interrupts = <0 30 0>;
+				clocks = <&car 79>;
+			};
+			vpp@13110000 {
+				compatible = "sirf,atlas7-vpp";
+				reg = <0x13110000 0x10000>;
+				interrupts = <0 31 0>;
+				clocks = <&car 78>;
+				resets = <&car 29>;
+			};
+			lvds@10e10000 {
+				compatible = "sirf,atlas7-lvdsc";
+				reg = <0x10e10000 0x10000>;
+				interrupts = <0 64 0>;
+				clocks = <&car 54>;
+				resets = <&car 29>;
+			};
+
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x12000000 0x12000000 0x1000000>;
+
+			graphics@12000000 {
+				compatible = "powervr,sgx531";
+				reg = <0x12000000 0x1000000>;
+				interrupts = <0 6 0>;
+				clocks = <&car 126>;
+			};
+		};
+	};
+};
diff --git a/src/arm/axm5516-amarillo.dts b/src/arm/axm5516-amarillo.dts
new file mode 100644
index 000000000000..a9d60471d9ff
--- /dev/null
+++ b/src/arm/axm5516-amarillo.dts
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/boot/dts/axm5516-amarillo.dts
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x00000000 0x00400000;
+
+#include "axm55xx.dtsi"
+#include "axm5516-cpus.dtsi"
+
+/ {
+	model = "Amarillo AXM5516";
+	compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0x02 0x00000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/src/arm/axm5516-cpus.dtsi b/src/arm/axm5516-cpus.dtsi
new file mode 100644
index 000000000000..b85f360cb125
--- /dev/null
+++ b/src/arm/axm5516-cpus.dtsi
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/boot/dts/axm5516-cpus.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x00>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x01>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x02>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x03>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+			clock-frequency= <1400000000>;
+			cpu-release-addr = <0>; // Fixed by the boot loader
+		};
+	};
+};
diff --git a/src/arm/axm55xx.dtsi b/src/arm/axm55xx.dtsi
new file mode 100644
index 000000000000..ea288f0a1d39
--- /dev/null
+++ b/src/arm/axm55xx.dtsi
@@ -0,0 +1,204 @@
+/*
+ * arch/arm/boot/dts/axm55xx.dtsi
+ *
+ * Copyright (C) 2013 LSI
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/lsi,axm5516-clks.h>
+
+#include "skeleton64.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0	  = &serial0;
+		serial1   = &serial1;
+		serial2	  = &serial2;
+		serial3	  = &serial3;
+		timer	  = &timer0;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clk_ref0: clk_ref0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref1: clk_ref1 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clk_ref2: clk_ref2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		clks: clock-controller@2010020000 {
+			compatible = "lsi,axm5516-clks";
+			#clock-cells = <1>;
+			reg = <0x20 0x10020000 0 0x20000>;
+		};
+	};
+
+	gic: interrupt-controller@2001001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x20 0x01001000 0 0x1000>,
+		      <0x20 0x01002000 0 0x1000>,
+		      <0x20 0x01004000 0 0x2000>,
+		      <0x20 0x01006000 0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		device_type = "soc";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		syscon: syscon@2010030000 {
+			compatible = "lsi,axxia-syscon", "syscon";
+			reg = <0x20 0x10030000 0 0x2000>;
+		};
+
+		reset: reset@2010031000 {
+			compatible = "lsi,axm55xx-reset";
+			syscon = <&syscon>;
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			serial0: uart@2010080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10080000 0 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial1: uart@2010081000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10081000 0 0x1000>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial2: uart@2010082000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10082000 0 0x1000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			serial3: uart@2010083000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x20 0x10083000 0 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			timer0: timer@2010091000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x20 0x10091000 0 0x1000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "okay";
+			};
+
+			gpio0: gpio@2010092000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10092000 0x00 0x1000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			gpio1: gpio@2010093000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0x20 0x10093000 0x00 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks AXXIA_CLK_PER>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+		};
+	};
+};
+
+/*
+  Local Variables:
+  mode: C
+  End:
+*/
diff --git a/src/arm/axp209.dtsi b/src/arm/axp209.dtsi
new file mode 100644
index 000000000000..c20cf537f5a5
--- /dev/null
+++ b/src/arm/axp209.dtsi
@@ -0,0 +1,97 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP202/209 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP20X.php
+ * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
+ */
+
+&axp209 {
+	compatible = "x-powers,axp209";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <1500>;
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_ldo1: ldo1 {
+			/* LDO1 is a fixed output regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-name = "ldo1";
+		};
+
+		reg_ldo2: ldo2 {
+			regulator-name = "ldo2";
+		};
+
+		reg_ldo3: ldo3 {
+			regulator-name = "ldo3";
+		};
+
+		reg_ldo4: ldo4 {
+			regulator-name = "ldo4";
+		};
+
+		reg_ldo5: ldo5 {
+			regulator-name = "ldo5";
+		};
+	};
+};
diff --git a/src/arm/bcm-cygnus-clock.dtsi b/src/arm/bcm-cygnus-clock.dtsi
new file mode 100644
index 000000000000..60d8389fdb6c
--- /dev/null
+++ b/src/arm/bcm-cygnus-clock.dtsi
@@ -0,0 +1,91 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+clocks {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	osc: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <1>;
+		clock-frequency = <25000000>;
+	};
+
+	apb_clk: apb_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000000>;
+	};
+
+	periph_clk: periph_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+	};
+
+	sdio_clk: lcpll_ch2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+	};
+
+	axi81_clk: axi81_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	keypad_clk: keypad_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <31806>;
+	};
+
+	adc_clk: adc_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1562500>;
+	};
+
+	pwm_clk: pwm_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+	};
+
+	lcd_clk: mipipll_ch1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+};
diff --git a/src/arm/bcm-cygnus.dtsi b/src/arm/bcm-cygnus.dtsi
new file mode 100644
index 000000000000..ff5fb6ab0b97
--- /dev/null
+++ b/src/arm/bcm-cygnus.dtsi
@@ -0,0 +1,160 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,cygnus";
+	model = "Broadcom Cygnus SoC";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+
+	/include/ "bcm-cygnus-clock.dtsi"
+
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus", "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		wdt@18009000 {
+			 compatible = "arm,sp805" , "arm,primecell";
+			 reg = <0x18009000 0x1000>;
+			 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			 clocks = <&axi81_clk>;
+			 clock-names = "apb_pclk";
+		};
+	};
+
+	i2c0: i2c@18008000 {
+		compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+		reg = <0x18008000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@1800b000 {
+		compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+		reg = <0x1800b000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	uart0: serial@18020000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x18020000 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&axi81_clk>;
+		clock-frequency = <100000000>;
+		status = "disabled";
+	};
+
+	uart1: serial@18021000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x18021000 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&axi81_clk>;
+		clock-frequency = <100000000>;
+		status = "disabled";
+	};
+
+	uart2: serial@18022000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x18020000 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&axi81_clk>;
+		clock-frequency = <100000000>;
+		status = "disabled";
+	};
+
+	uart3: serial@18023000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x18023000 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&axi81_clk>;
+		clock-frequency = <100000000>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@19021000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x19021000 0x1000>,
+		      <0x19020100 0x100>;
+	};
+
+	L2: l2-cache {
+		compatible = "arm,pl310-cache";
+		reg = <0x19022000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	timer@19020200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x19020200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&periph_clk>;
+	};
+
+};
diff --git a/src/arm/bcm11351.dtsi b/src/arm/bcm11351.dtsi
new file mode 100644
index 000000000000..2ddaa5136611
--- /dev/null
+++ b/src/arm/bcm11351.dtsi
@@ -0,0 +1,424 @@
+/*
+ * Copyright (C) 2012-2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "dt-bindings/clock/bcm281xx.h"
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "BCM11351 SoC";
+	compatible = "brcm,bcm11351";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm11351-cpu-method";
+		secondary-boot-reg = <0x3500417c>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	gic: interrupt-controller@3ff00100 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x3ff01000 0x1000>,
+		      <0x3ff00100 0x100>;
+	};
+
+	smc@0x3404c000 {
+		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
+		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
+	};
+
+	uart@3e000000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e000000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e001000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e001000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e003000 {
+		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e003000 0x1000>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	L2: l2-cache {
+		compatible = "brcm,bcm11351-a2-pl310-cache";
+		reg = <0x3ff20000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	watchdog@35002f40 {
+		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+		reg = <0x35002f40 0x6c>;
+	};
+
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1000>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_HUB_TIMER>;
+	};
+
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x800>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: sdio@3f180000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f180000 0x10000>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO1>;
+		status = "disabled";
+	};
+
+	sdio2: sdio@3f190000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f190000 0x10000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO2>;
+		status = "disabled";
+	};
+
+	sdio3: sdio@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1a0000 0x10000>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO3>;
+		status = "disabled";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1b0000 0x10000>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM281XX_MASTER_CCU_SDIO4>;
+		status = "disabled";
+	};
+
+	pinctrl@35004800 {
+		compatible = "brcm,bcm11351-pinctrl";
+		reg = <0x35004800 0x430>;
+	};
+
+	i2c@3e016000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x80>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC1>;
+		status = "disabled";
+	};
+
+	i2c@3e017000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x80>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC2>;
+		status = "disabled";
+	};
+
+	i2c@3e018000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x80>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_BSC3>;
+		status = "disabled";
+	};
+
+	i2c@3500d000 {
+		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+		reg = <0x3500d000 0x80>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&aon_ccu BCM281XX_AON_CCU_PMU_BSC>;
+		status = "disabled";
+	};
+
+	pwm: pwm@3e01a000 {
+		compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+		reg = <0x3e01a000 0xcc>;
+		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		root_ccu: root_ccu {
+			compatible = "brcm,bcm11351-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		hub_ccu: hub_ccu {
+			compatible = "brcm,bcm11351-hub-ccu";
+			reg = <0x34000000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "tmon_1m";
+		};
+
+		aon_ccu: aon_ccu {
+			compatible = "brcm,bcm11351-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer",
+					     "pmu_bsc",
+					     "pmu_bsc_var";
+		};
+
+		master_ccu: master_ccu {
+			compatible = "brcm,bcm11351-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "usb_ic",
+					     "hsic2_48m",
+					     "hsic2_12m";
+		};
+
+		slave_ccu: slave_ccu {
+			compatible = "brcm,bcm11351-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "uartb4",
+					     "ssp0",
+					     "ssp2",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "pwm";
+		};
+
+		ref_1m_clk: ref_1m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <1000000>;
+		};
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_cx40_clk: ref_cx40 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+			#clock-cells = <0>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		ref_208m_clk: ref_208m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
+		};
+
+		var_208m_clk: var_208m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
+		};
+
+		ref_312m_clk: ref_312m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <312000000>;
+		};
+
+		var_312m_clk: var_312m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <312000000>;
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/bcm21664-garnet.dts b/src/arm/bcm21664-garnet.dts
new file mode 100644
index 000000000000..e87cb26ddf84
--- /dev/null
+++ b/src/arm/bcm21664-garnet.dts
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm21664.dtsi"
+
+/ {
+	model = "BCM21664 Garnet board";
+	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
+
+	memory {
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	uart@3e000000 {
+		status = "okay";
+	};
+
+	sdio1: sdio@3f180000 {
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio2: sdio@3f190000 {
+		non-removable;
+		max-frequency = <48000000>;
+		status = "okay";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		max-frequency = <48000000>;
+		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+	usbotg: usb@3f120000 {
+		status = "okay";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		status = "okay";
+	};
+};
diff --git a/src/arm/bcm21664.dtsi b/src/arm/bcm21664.dtsi
new file mode 100644
index 000000000000..2016b72a8fb7
--- /dev/null
+++ b/src/arm/bcm21664.dtsi
@@ -0,0 +1,357 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "dt-bindings/clock/bcm21664.h"
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "BCM21664 SoC";
+	compatible = "brcm,bcm21664";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+       cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm11351-cpu-method";
+		secondary-boot-reg = <0x35004178>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	gic: interrupt-controller@3ff00100 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x3ff01000 0x1000>,
+		      <0x3ff00100 0x100>;
+	};
+
+	smc@0x3404e000 {
+		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
+		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
+	};
+
+	uart@3e000000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e000000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e001000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e001000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	uart@3e002000 {
+		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
+		status = "disabled";
+		reg = <0x3e002000 0x118>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
+
+	L2: l2-cache {
+		compatible = "arm,pl310-cache";
+		reg = <0x3ff20000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	brcm,resetmgr@35001f00 {
+		compatible = "brcm,bcm21664-resetmgr";
+		reg = <0x35001f00 0x24>;
+	};
+
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1c>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+	};
+
+	gpio: gpio@35003000 {
+		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+		reg = <0x35003000 0x524>;
+		interrupts =
+		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		interrupt-controller;
+	};
+
+	sdio1: sdio@3f180000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f180000 0x801c>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+		status = "disabled";
+	};
+
+	sdio2: sdio@3f190000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f190000 0x801c>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+		status = "disabled";
+	};
+
+	sdio3: sdio@3f1a0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1a0000 0x801c>;
+		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+		status = "disabled";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		compatible = "brcm,kona-sdhci";
+		reg = <0x3f1b0000 0x801c>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+		status = "disabled";
+	};
+
+	i2c@3e016000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e016000 0x70>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+		status = "disabled";
+	};
+
+	i2c@3e017000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e017000 0x70>;
+		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+		status = "disabled";
+	};
+
+	i2c@3e018000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e018000 0x70>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+		status = "disabled";
+	};
+
+	i2c@3e01c000 {
+		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+		reg = <0x3e01c000 0x70>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu {
+			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu {
+			compatible = BCM21664_DT_AON_CCU_COMPAT;
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		master_ccu: master_ccu {
+			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+
+		slave_ccu: slave_ccu {
+			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+	};
+
+	usbotg: usb@3f120000 {
+		compatible = "snps,dwc2";
+		reg = <0x3f120000 0x10000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usb_otg_ahb_clk>;
+		clock-names = "otg";
+		phys = <&usbphy>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		compatible = "brcm,kona-usb2-phy";
+		reg = <0x3f130000 0x28>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/bcm28155-ap.dts b/src/arm/bcm28155-ap.dts
new file mode 100644
index 000000000000..9ce91dd60cb6
--- /dev/null
+++ b/src/arm/bcm28155-ap.dts
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm11351.dtsi"
+
+/ {
+	model = "BCM28155 AP board";
+	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
+
+	memory {
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	uart@3e000000 {
+		status = "okay";
+	};
+
+	i2c@3e016000 {
+		status="okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@3e017000 {
+		status="okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@3e018000 {
+		status="okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@3500d000 {
+		status="okay";
+		clock-frequency = <100000>;
+
+		pmu: pmu@8 {
+			reg = <0x08>;
+		};
+	};
+
+	sdio2: sdio@3f190000 {
+		non-removable;
+		max-frequency = <48000000>;
+		vmmc-supply = <&camldo1_reg>;
+		vqmmc-supply = <&iosr1_reg>;
+		status = "okay";
+	};
+
+	sdio4: sdio@3f1b0000 {
+		max-frequency = <48000000>;
+		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+		vmmc-supply = <&sdldo_reg>;
+		vqmmc-supply = <&sdxldo_reg>;
+		status = "okay";
+	};
+
+	pwm: pwm@3e01a000 {
+		status = "okay";
+	};
+
+	usbotg: usb@3f120000 {
+		vusb_d-supply = <&usbldo_reg>;
+		vusb_a-supply = <&iosr1_reg>;
+		status = "okay";
+	};
+
+	usbphy: usb-phy@3f130000 {
+		status = "okay";
+	};
+};
+
+#include "bcm59056.dtsi"
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+	regulators {
+		camldo1_reg: camldo1 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		sdldo_reg: sdldo {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		sdxldo_reg: sdxldo {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		usbldo_reg: usbldo {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		iosr1_reg: iosr1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/bcm2835-rpi-b-plus.dts b/src/arm/bcm2835-rpi-b-plus.dts
new file mode 100644
index 000000000000..e479515099c3
--- /dev/null
+++ b/src/arm/bcm2835-rpi-b-plus.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+/include/ "bcm2835-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model B+";
+
+	leds {
+		act {
+			gpios = <&gpio 47 0>;
+		};
+
+		pwr {
+			label = "PWR";
+			gpios = <&gpio 35 0>;
+			default-state = "keep";
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <4>; /* alt0 */
+	};
+};
diff --git a/src/arm/bcm2835-rpi-b.dts b/src/arm/bcm2835-rpi-b.dts
new file mode 100644
index 000000000000..bafa46fc226a
--- /dev/null
+++ b/src/arm/bcm2835-rpi-b.dts
@@ -0,0 +1,23 @@
+/dts-v1/;
+/include/ "bcm2835-rpi.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b", "brcm,bcm2835";
+	model = "Raspberry Pi Model B";
+
+	leds {
+		act {
+			gpios = <&gpio 16 1>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <6>; /* alt2 */
+	};
+};
diff --git a/src/arm/bcm2835-rpi.dtsi b/src/arm/bcm2835-rpi.dtsi
new file mode 100644
index 000000000000..c7064487017d
--- /dev/null
+++ b/src/arm/bcm2835-rpi.dtsi
@@ -0,0 +1,51 @@
+/include/ "bcm2835.dtsi"
+
+/ {
+	memory {
+		reg = <0 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+
+	gpioout: gpioout {
+		brcm,pins = <6>;
+		brcm,function = <1>; /* GPIO out */
+	};
+
+	alt0: alt0 {
+		brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
+		brcm,function = <4>; /* alt0 */
+	};
+
+	alt3: alt3 {
+		brcm,pins = <48 49 50 51 52 53>;
+		brcm,function = <7>; /* alt3 */
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&sdhci {
+	status = "okay";
+	bus-width = <4>;
+};
diff --git a/src/arm/bcm2835.dtsi b/src/arm/bcm2835.dtsi
new file mode 100644
index 000000000000..3342cb1407bc
--- /dev/null
+++ b/src/arm/bcm2835.dtsi
@@ -0,0 +1,183 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	interrupt-parent = <&intc>;
+
+	chosen {
+		bootargs = "earlyprintk console=ttyAMA0";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+
+		timer@7e003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			clock-frequency = <1000000>;
+		};
+
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     <1 27>,
+				     <1 28>;
+
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm-wdt";
+			reg = <0x7e100000 0x28>;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+		};
+
+		gpio: gpio@7e200000 {
+			compatible = "brcm,bcm2835-gpio";
+			reg = <0x7e200000 0xb4>;
+			/*
+			 * The GPIO IP block is designed for 3 banks of GPIOs.
+			 * Each bank has a GPIO interrupt for itself.
+			 * There is an overall "any bank" interrupt.
+			 * In order, these are GIC interrupts 17, 18, 19, 20.
+			 * Since the BCM2835 only has 2 banks, the 2nd bank
+			 * interrupt output appears to be mirrored onto the
+			 * 3rd bank's interrupt signal.
+			 * So, a bank0 interrupt shows up on 17, 20, and
+			 * a bank1 interrupt shows up on 18, 19, 20!
+			 */
+			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart@7e201000 {
+			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x1000>;
+			interrupts = <2 25>;
+			clock-frequency = <3000000>;
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x20>,
+			      <0x7e101098 0x02>;
+
+			dmas = <&dma 2>,
+			       <&dma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		spi: spi@7e204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x1000>;
+			interrupts = <2 22>;
+			clocks = <&clk_spi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@20205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sdhci: sdhci@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clk_mmc>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@7e804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb@7e980000 {
+			compatible = "brcm,bcm2835-usb";
+			reg = <0x7e980000 0x10000>;
+			interrupts = <1 9>;
+		};
+
+		arm-pmu {
+			compatible = "arm,arm1176-pmu";
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk_mmc: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-output-names = "mmc";
+			clock-frequency = <100000000>;
+		};
+
+		clk_i2c: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-output-names = "i2c";
+			clock-frequency = <250000000>;
+		};
+
+		clk_spi: clock@2 {
+			compatible = "fixed-clock";
+			reg = <2>;
+			#clock-cells = <0>;
+			clock-output-names = "spi";
+			clock-frequency = <250000000>;
+		};
+	};
+};
diff --git a/src/arm/bcm4708-buffalo-wzr-1750dhp.dts b/src/arm/bcm4708-buffalo-wzr-1750dhp.dts
new file mode 100644
index 000000000000..b359c1e6178e
--- /dev/null
+++ b/src/arm/bcm4708-buffalo-wzr-1750dhp.dts
@@ -0,0 +1,130 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1750DHP
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708";
+	model = "Buffalo WZR-1750DHP (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power0 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		power1 {
+			label = "bcm53xx:white:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router0 {
+			label = "bcm53xx:blue:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wireless0 {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		sw_ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/bcm4708-luxul-xwc-1000.dts b/src/arm/bcm4708-luxul-xwc-1000.dts
new file mode 100644
index 000000000000..946c728c4eb7
--- /dev/null
+++ b/src/arm/bcm4708-luxul-xwc-1000.dts
@@ -0,0 +1,60 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Luxul XWC-1000
+ *
+ * Copyright 2014 Luxul Inc.
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xwc-1000", "brcm,bcm4708";
+	model = "Luxul XWC-1000 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	axi@18000000 {
+		nand@28000 {
+			reg = <0x00028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ubi";
+				reg = <0x00000000 0x08000000>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/bcm4708-netgear-r6250.dts b/src/arm/bcm4708-netgear-r6250.dts
new file mode 100644
index 000000000000..f18c9d9b2f2c
--- /dev/null
+++ b/src/arm/bcm4708-netgear-r6250.dts
@@ -0,0 +1,93 @@
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for Netgear R6250 V1
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "netgear,r6250v1", "brcm,bcm4708";
+	model = "Netgear R6250 V1 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	chipcommonA {
+		uart0: serial@0300 {
+			status = "okay";
+		};
+
+		uart1: serial@0400 {
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/bcm4708-netgear-r6300-v2.dts b/src/arm/bcm4708-netgear-r6300-v2.dts
new file mode 100644
index 000000000000..39910428246a
--- /dev/null
+++ b/src/arm/bcm4708-netgear-r6300-v2.dts
@@ -0,0 +1,83 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R6300 V2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "netgear,r6300v2", "brcm,bcm4708";
+	model = "Netgear R6300 V2 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/bcm4708.dtsi b/src/arm/bcm4708.dtsi
new file mode 100644
index 000000000000..31141e83fedd
--- /dev/null
+++ b/src/arm/bcm4708.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM4708 SoC.
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+	compatible = "brcm,bcm4708";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+};
diff --git a/src/arm/bcm47081-asus-rt-n18u.dts b/src/arm/bcm47081-asus-rt-n18u.dts
new file mode 100644
index 000000000000..0ee85ea10bb2
--- /dev/null
+++ b/src/arm/bcm47081-asus-rt-n18u.dts
@@ -0,0 +1,77 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-N18U
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Asus RT-N18U (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/bcm47081-buffalo-wzr-600dhp2.dts b/src/arm/bcm47081-buffalo-wzr-600dhp2.dts
new file mode 100644
index 000000000000..db9131e03268
--- /dev/null
+++ b/src/arm/bcm47081-buffalo-wzr-600dhp2.dts
@@ -0,0 +1,123 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-600DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Buffalo WZR-600DHP2 (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		power1 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		router0 {
+			label = "bcm53xx:green:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		wireless0 {
+			label = "bcm53xx:green:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch device mode? */
+		mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/bcm47081-buffalo-wzr-900dhp.dts b/src/arm/bcm47081-buffalo-wzr-900dhp.dts
new file mode 100644
index 000000000000..7d6868acb1c6
--- /dev/null
+++ b/src/arm/bcm47081-buffalo-wzr-900dhp.dts
@@ -0,0 +1,37 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-900DHP
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Buffalo WZR-900DHP (BCM47081)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/bcm47081.dtsi b/src/arm/bcm47081.dtsi
new file mode 100644
index 000000000000..f720012ee5ed
--- /dev/null
+++ b/src/arm/bcm47081.dtsi
@@ -0,0 +1,26 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM47081 SoC.
+ *
+ * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+	compatible = "brcm,bcm47081";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/src/arm/bcm5301x.dtsi b/src/arm/bcm5301x.dtsi
new file mode 100644
index 000000000000..78aec6270c2f
--- /dev/null
+++ b/src/arm/bcm5301x.dtsi
@@ -0,0 +1,146 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chipcommonA {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@0300 {
+			compatible = "ns16550";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart1: serial@0400 {
+			compatible = "ns16550";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+	};
+
+	mpcore {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19020000 0x00003000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x0000 0x100>;
+		};
+
+		timer@0200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x0200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_periph>;
+		};
+
+		local-timer@0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x0600 0x100>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_periph>;
+		};
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x0100 0x100>;
+		};
+
+		L2: cache-controller@2000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x2000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* As long as we do not have a real clock driver us this
+		 * fixed clock */
+		clk_periph: periph {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map = 
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 3.0 Controller */
+			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 2 */
+			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 3 */
+			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* NAND Controller */
+			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			reg = <0x00000000 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
diff --git a/src/arm/bcm59056.dtsi b/src/arm/bcm59056.dtsi
new file mode 100644
index 000000000000..066adfb10bd5
--- /dev/null
+++ b/src/arm/bcm59056.dtsi
@@ -0,0 +1,95 @@
+/*
+* Copyright 2014 Linaro Limited
+* Author: Matt Porter <mporter@linaro.org>
+*
+* This program is free software; you can redistribute it and/or modify it
+* under  the terms of the GNU General  Public License as published by the
+* Free Software Foundation;  either version 2 of the License, or (at your
+* option) any later version.
+*/
+
+&pmu {
+	compatible = "brcm,bcm59056";
+	regulators {
+		rfldo_reg: rfldo {
+		};
+
+		camldo1_reg: camldo1 {
+		};
+
+		camldo2_reg: camldo2 {
+		};
+
+		simldo1_reg: simldo1 {
+		};
+
+		simldo2_reg: simldo2 {
+		};
+
+		sdldo_reg: sdldo {
+		};
+
+		sdxldo_reg: sdxldo {
+		};
+
+		mmcldo1_reg: mmcldo1 {
+		};
+
+		mmcldo2_reg: mmcldo2 {
+		};
+
+		audldo_reg: audldo {
+		};
+
+		micldo_reg: micldo {
+		};
+
+		usbldo_reg: usbldo {
+		};
+
+		vibldo_reg: vibldo {
+		};
+
+		csr_reg: csr {
+		};
+
+		iosr1_reg: iosr1 {
+		};
+
+		iosr2_reg: iosr2 {
+		};
+
+		msr_reg: msr {
+		};
+
+		sdsr1_reg: sdsr1 {
+		};
+
+		sdsr2_reg: sdsr2 {
+		};
+
+		vsr_reg: vsr {
+		};
+
+		gpldo1_reg: gpldo1 {
+		};
+
+		gpldo2_reg: gpldo2 {
+		};
+
+		gpldo3_reg: gpldo3 {
+		};
+
+		gpldo4_reg: gpldo4 {
+		};
+
+		gpldo5_reg: gpldo5 {
+		};
+
+		gpldo6_reg: gpldo6 {
+		};
+
+		vbus_reg: vbus {
+		};
+	};
+};
diff --git a/src/arm/bcm63138.dtsi b/src/arm/bcm63138.dtsi
new file mode 100644
index 000000000000..f46329c8ad75
--- /dev/null
+++ b/src/arm/bcm63138.dtsi
@@ -0,0 +1,135 @@
+/*
+ * Broadcom BCM63138 DSL SoCs Device Tree
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm63138";
+	model = "Broadcom BCM63138 DSL SoC";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		uart0 = &serial0;
+		uart1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <500000000>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+	};
+
+	/* ARM bus */
+	axi@80000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x80000000 0x784000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		L2: cache-controller@1d000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x1d000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <524288>;
+			cache-sets = <1024>;
+			cache-line-size = <32>;
+			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		scu: scu@1e000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x1e000 0x100>;
+		};
+
+		gic: interrupt-controller@1e100 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x1f000 0x1000
+				0x1e100 0x100>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+
+		global_timer: timer@1e200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1e200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		local_timer: local-timer@1e600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1e600 0x20>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		twd_watchdog: watchdog@1e620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x1e620 0x20>;
+			interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	/* Legacy UBUS base */
+	ubus@fffe8000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8100>;
+
+		serial0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x1b>;
+			interrupts = <GIC_SPI 32 0>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		serial1: serial@620 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x620 0x1b>;
+			interrupts = <GIC_SPI 33 0>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/bcm7445-bcm97445svmb.dts b/src/arm/bcm7445-bcm97445svmb.dts
new file mode 100644
index 000000000000..9eec2ac1112f
--- /dev/null
+++ b/src/arm/bcm7445-bcm97445svmb.dts
@@ -0,0 +1,14 @@
+/dts-v1/;
+#include "bcm7445.dtsi"
+
+/ {
+	model = "Broadcom STB (bcm7445), SVMB reference board";
+	compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00 0x00000000 0x00 0x40000000>,
+		      <0x00 0x40000000 0x00 0x40000000>,
+		      <0x00 0x80000000 0x00 0x40000000>;
+	};
+};
diff --git a/src/arm/bcm7445.dtsi b/src/arm/bcm7445.dtsi
new file mode 100644
index 000000000000..0ca0f4e523d0
--- /dev/null
+++ b/src/arm/bcm7445.dtsi
@@ -0,0 +1,111 @@
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Broadcom STB (bcm7445)";
+	compatible = "brcm,bcm7445", "brcm,brcmstb";
+	interrupt-parent = <&gic>;
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "brcm,brahma-b15";
+			device_type = "cpu";
+			enable-method = "brcm,brahma-b15";
+			reg = <3>;
+		};
+	};
+
+	gic: interrupt-controller@ffd00000 {
+		compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic";
+		reg = <0x00 0xffd01000 0x00 0x1000>,
+		      <0x00 0xffd02000 0x00 0x2000>,
+		      <0x00 0xffd04000 0x00 0x2000>,
+		      <0x00 0xffd06000 0x00 0x2000>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	rdb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0x00 0xf0000000 0x1000000>;
+
+		serial@40ab00 {
+			compatible = "ns16550a";
+			reg = <0x40ab00 0x20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0x4d3f640>;
+		};
+
+		sun_top_ctrl: syscon@404000 {
+			compatible = "brcm,bcm7445-sun-top-ctrl",
+				     "syscon";
+			reg = <0x404000 0x51c>;
+		};
+
+		hif_cpubiuctrl: syscon@3e2400 {
+			compatible = "brcm,bcm7445-hif-cpubiuctrl",
+				     "syscon";
+			reg = <0x3e2400 0x5b4>;
+		};
+
+		hif_continuation: syscon@452000 {
+			compatible = "brcm,bcm7445-hif-continuation",
+				     "syscon";
+			reg = <0x452000 0x100>;
+		};
+	};
+
+	smpboot {
+		compatible = "brcm,brcmstb-smpboot";
+		syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+		syscon-cont = <&hif_continuation>;
+	};
+
+	reboot {
+		compatible = "brcm,brcmstb-reboot";
+		syscon = <&sun_top_ctrl 0x304 0x308>;
+	};
+};
diff --git a/src/arm/bcm911360_entphn.dts b/src/arm/bcm911360_entphn.dts
new file mode 100644
index 000000000000..d2ee95280548
--- /dev/null
+++ b/src/arm/bcm911360_entphn.dts
@@ -0,0 +1,53 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+	model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
+	compatible = "brcm,bcm11360", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS0,115200";
+	};
+
+	uart3: serial@18023000 {
+		status = "okay";
+	};
+};
diff --git a/src/arm/bcm911360k.dts b/src/arm/bcm911360k.dts
new file mode 100644
index 000000000000..9658d4f62d59
--- /dev/null
+++ b/src/arm/bcm911360k.dts
@@ -0,0 +1,53 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+	model = "Cygnus SVK (BCM911360K)";
+	compatible = "brcm,bcm11360", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS0,115200";
+	};
+
+	uart3: serial@18023000 {
+		status = "okay";
+	};
+};
diff --git a/src/arm/bcm958300k.dts b/src/arm/bcm958300k.dts
new file mode 100644
index 000000000000..f1bb36f3975c
--- /dev/null
+++ b/src/arm/bcm958300k.dts
@@ -0,0 +1,53 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2014 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+	model = "Cygnus SVK (BCM958300K)";
+	compatible = "brcm,bcm58300", "brcm,cygnus";
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS0,115200";
+	};
+
+	uart3: serial@18023000 {
+		status = "okay";
+	};
+};
diff --git a/src/arm/bcm963138dvt.dts b/src/arm/bcm963138dvt.dts
new file mode 100644
index 000000000000..69c93395ecd2
--- /dev/null
+++ b/src/arm/bcm963138dvt.dts
@@ -0,0 +1,30 @@
+/*
+ * Broadcom BCM63138 Reference Board DTS
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	compatible = "brcm,BCM963138DVT", "brcm,bcm63138";
+	model = "Broadcom BCM963138DVT";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory {
+		reg = <0x0 0x08000000>;
+	};
+
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
diff --git a/src/arm/berlin2-sony-nsz-gs7.dts b/src/arm/berlin2-sony-nsz-gs7.dts
new file mode 100644
index 000000000000..86d85d8896a3
--- /dev/null
+++ b/src/arm/berlin2-sony-nsz-gs7.dts
@@ -0,0 +1,45 @@
+/*
+ * Device Tree file for Sony NSZ-GS7
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "berlin2.dtsi"
+
+/ {
+	model = "Sony NSZ-GS7";
+	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+};
+
+&ahci { status = "okay"; };
+
+&eth1 { status = "okay"; };
+
+/* Unpopulated SATA plug on solder side */
+&sata0 { status = "okay"; };
+
+&sata_phy { status = "okay"; };
+
+/* Samsung M8G2FA 8GB eMMC */
+&sdhci2 {
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&uart0 { status = "okay"; };
diff --git a/src/arm/berlin2.dtsi b/src/arm/berlin2.dtsi
new file mode 100644
index 000000000000..63d00a63cfa6
--- /dev/null
+++ b/src/arm/berlin2.dtsi
@@ -0,0 +1,474 @@
+/*
+ * Device Tree Include file for Marvell Armada 1500 (Berlin BG2) SoC
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * based on GPL'ed 2.6 kernel sources
+ *  (c) Marvell International Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/berlin2.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell Armada 1500 (BG2) SoC";
+	compatible = "marvell,berlin2", "marvell,berlin";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,berlin-smp";
+
+		cpu@0 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+	};
+
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&gic>;
+
+		ranges = <0 0xf7000000 0x1000000>;
+
+		sdhci0: sdhci@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+			clock-names = "io", "core";
+			pinctrl-0 = <&emmc_pmux>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		l2: l2-cache-controller@ac0000 {
+			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
+			reg = <0xac0000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		scu: snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
+		gic: interrupt-controller@ad1000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		local-timer@ad0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xad0600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&chip CLKID_TWD>;
+		};
+
+		eth1: ethernet@b90000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xb90000 0x10000>;
+			clocks = <&chip CLKID_GETH1>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy1>;
+			status = "disabled";
+
+			ethphy1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		cpu-ctrl@dd0000 {
+			compatible = "marvell,berlin-cpu-ctrl";
+			reg = <0xdd0000 0x10000>;
+		};
+
+		eth0: ethernet@e50000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xe50000 0x10000>;
+			clocks = <&chip CLKID_GETH0>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy0>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			timer0: timer@2c00 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c00 0x14>;
+				interrupts = <8>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "okay";
+			};
+
+			timer1: timer@2c14 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c14 0x14>;
+				interrupts = <9>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "okay";
+			};
+
+			timer2: timer@2c28 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c28 0x14>;
+				interrupts = <10>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer3: timer@2c3c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c3c 0x14>;
+				interrupts = <11>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer4: timer@2c50 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c50 0x14>;
+				interrupts = <12>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer5: timer@2c64 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c64 0x14>;
+				interrupts = <13>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer6: timer@2c78 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c78 0x14>;
+				interrupts = <14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer7: timer@2c8c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c8c 0x14>;
+				interrupts = <15>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@3000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3000 0xc00>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		ahci: sata@e90000 {
+			compatible = "marvell,berlin2-ahci", "generic-ahci";
+			reg = <0xe90000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_SATA>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy 0>;
+				status = "disabled";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy 1>;
+				status = "disabled";
+			};
+		};
+
+		sata_phy: phy@e900a0 {
+			compatible = "marvell,berlin2-sata-phy";
+			reg = <0xe900a0 0x200>;
+			clocks = <&chip CLKID_SATA>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#phy-cells = <1>;
+			status = "disabled";
+
+			sata-phy@0 {
+				reg = <0>;
+			};
+
+			sata-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		chip: chip-control@ea0000 {
+			compatible = "marvell,berlin2-chip-ctrl";
+			#clock-cells = <1>;
+			#reset-cells = <2>;
+			reg = <0xea0000 0x400>;
+			clocks = <&refclk>;
+			clock-names = "refclk";
+
+			emmc_pmux: emmc-pmux {
+				groups = "G26";
+				function = "emmc";
+			};
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <11>;
+				};
+			};
+
+			uart0: serial@9000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x9000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <8>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart1: serial@a000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xa000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <9>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart1_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart2: serial@b000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xb000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <10>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart2_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sysctrl: system-controller@d000 {
+				compatible = "marvell,berlin2-system-ctrl";
+				reg = <0xd000 0x100>;
+
+				uart0_pmux: uart0-pmux {
+					groups = "GSM4";
+					function = "uart0";
+				};
+
+				uart1_pmux: uart1-pmux {
+					groups = "GSM5";
+					function = "uart1";
+				};
+
+				uart2_pmux: uart2-pmux {
+					groups = "GSM3";
+					function = "uart2";
+				};
+			};
+
+			sic: interrupt-controller@e000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0xe000 0x400>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/src/arm/berlin2cd-google-chromecast.dts b/src/arm/berlin2cd-google-chromecast.dts
new file mode 100644
index 000000000000..30270be4d0c9
--- /dev/null
+++ b/src/arm/berlin2cd-google-chromecast.dts
@@ -0,0 +1,59 @@
+/*
+ * Device Tree file for Google Chromecast
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "berlin2cd.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Google Chromecast";
+	compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		white {
+			label = "white";
+			gpios = <&portc 1 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		red {
+			label = "red";
+			gpios = <&portc 2 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * AzureWave AW-NH387 (Marvell 88W8787)
+ * 802.11b/g/n + Bluetooth 2.1
+ */
+&sdhci0 {
+	non-removable;
+	status = "okay";
+};
+
+&uart0 { status = "okay"; };
+
+&usb_phy1 { status = "okay"; };
+
+&usb1 { status = "okay"; };
diff --git a/src/arm/berlin2cd.dtsi b/src/arm/berlin2cd.dtsi
new file mode 100644
index 000000000000..81b670ac494a
--- /dev/null
+++ b/src/arm/berlin2cd.dtsi
@@ -0,0 +1,406 @@
+/*
+ * Device Tree Include file for Marvell Armada 1500-mini (Berlin BG2CD) SoC
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * based on GPL'ed 2.6 kernel sources
+ *  (c) Marvell International Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/berlin2.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Marvell Armada 1500-mini (BG2CD) SoC";
+	compatible = "marvell,berlin2cd", "marvell,berlin";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+	};
+
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&gic>;
+
+		ranges = <0 0xf7000000 0x1000000>;
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdhci0: sdhci@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+			clock-names = "io", "core";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		l2: l2-cache-controller@ac0000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xac0000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		gic: interrupt-controller@ad1000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		local-timer@ad0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xad0600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&chip CLKID_TWD>;
+		};
+
+		usb_phy0: usb-phy@b74000 {
+			compatible = "marvell,berlin2cd-usb-phy";
+			reg = <0xb74000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x178 23>;
+			status = "disabled";
+		};
+
+		usb_phy1: usb-phy@b78000 {
+			compatible = "marvell,berlin2cd-usb-phy";
+			reg = <0xb78000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x178 24>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@b90000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xb90000 0x10000>;
+			clocks = <&chip CLKID_GETH1>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy1>;
+			status = "disabled";
+
+			ethphy1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		eth0: ethernet@e50000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xe50000 0x10000>;
+			clocks = <&chip CLKID_GETH0>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy0>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			timer0: timer@2c00 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c00 0x14>;
+				interrupts = <8>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "okay";
+			};
+
+			timer1: timer@2c14 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c14 0x14>;
+				interrupts = <9>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "okay";
+			};
+
+			timer2: timer@2c28 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c28 0x14>;
+				interrupts = <10>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer3: timer@2c3c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c3c 0x14>;
+				interrupts = <11>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer4: timer@2c50 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c50 0x14>;
+				interrupts = <12>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer5: timer@2c64 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c64 0x14>;
+				interrupts = <13>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer6: timer@2c78 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c78 0x14>;
+				interrupts = <14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer7: timer@2c8c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c8c 0x14>;
+				interrupts = <15>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@3000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3000 0xc00>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		chip: chip-control@ea0000 {
+			compatible = "marvell,berlin2cd-chip-ctrl";
+			#clock-cells = <1>;
+			#reset-cells = <2>;
+			reg = <0xea0000 0x400>;
+			clocks = <&refclk>;
+			clock-names = "refclk";
+
+			uart0_pmux: uart0-pmux {
+				groups = "G6";
+				function = "uart0";
+			};
+		};
+
+		usb0: usb@ed0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xed0000 0x200>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB0>;
+			phys = <&usb_phy0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ee0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xee0000 0x200>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB1>;
+			phys = <&usb_phy1>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <8>;
+					reg = <0>;
+				};
+			};
+
+			uart0: serial@9000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x9000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <8>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart1: serial@a000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xa000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <9>;
+				clocks = <&refclk>;
+				status = "disabled";
+			};
+
+			sysctrl: system-controller@d000 {
+				compatible = "marvell,berlin2cd-system-ctrl";
+				reg = <0xd000 0x100>;
+			};
+
+			sic: interrupt-controller@e000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0xe000 0x400>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/src/arm/berlin2q-marvell-dmp.dts b/src/arm/berlin2q-marvell-dmp.dts
new file mode 100644
index 000000000000..a98ac1bd8f65
--- /dev/null
+++ b/src/arm/berlin2q-marvell-dmp.dts
@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "berlin2q.dtsi"
+
+/ {
+	model = "Marvell BG2-Q DMP";
+	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+
+	choosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb2_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "usb2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&sdhci1 {
+	broken-cd;
+	sdhci,wp-inverted;
+	status = "okay";
+};
+
+&sdhci2 {
+	broken-cd;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb_phy0 {
+	status = "okay";
+};
+
+&usb_phy2 {
+	status = "okay";
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb2 {
+	vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
diff --git a/src/arm/berlin2q.dtsi b/src/arm/berlin2q.dtsi
new file mode 100644
index 000000000000..be5397288d24
--- /dev/null
+++ b/src/arm/berlin2q.dtsi
@@ -0,0 +1,563 @@
+/*
+ * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/berlin2q.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
+	compatible = "marvell,berlin2q", "marvell,berlin";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,berlin-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <3>;
+		};
+	};
+
+	refclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0 0xf7000000 0x1000000>;
+		interrupt-parent = <&gic>;
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdhci0: sdhci@ab0000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0000 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@ab0800 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab0800 0x200>;
+			clocks = <&chip CLKID_SDIO1XIN>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@ab1000 {
+			compatible = "mrvl,pxav3-mmc";
+			reg = <0xab1000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+			clock-names = "io", "core";
+			status = "disabled";
+		};
+
+		l2: l2-cache-controller@ac0000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xac0000 0x1000>;
+			cache-level = <2>;
+			arm,data-latency = <2 2 2>;
+			arm,tag-latency = <2 2 2>;
+		};
+
+		scu: snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x58>;
+		};
+
+		local-timer@ad0600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xad0600 0x20>;
+			clocks = <&chip CLKID_TWD>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		gic: interrupt-controller@ad1000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xad1000 0x1000>, <0xad0100 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		usb_phy2: phy@a2f400 {
+			compatible = "marvell,berlin2-usb-phy";
+			reg = <0xa2f400 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x104 14>;
+			status = "disabled";
+		};
+
+		usb2: usb@a30000 {
+			compatible = "chipidea,usb2";
+			reg = <0xa30000 0x10000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB2>;
+			phys = <&usb_phy2>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		usb_phy0: phy@b74000 {
+			compatible = "marvell,berlin2-usb-phy";
+			reg = <0xb74000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x104 12>;
+			status = "disabled";
+		};
+
+		usb_phy1: phy@b78000 {
+			compatible = "marvell,berlin2-usb-phy";
+			reg = <0xb78000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x104 13>;
+			status = "disabled";
+		};
+
+		eth0: ethernet@b90000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xb90000 0x10000>;
+			clocks = <&chip CLKID_GETH0>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy0>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		cpu-ctrl@dd0000 {
+			compatible = "marvell,berlin-cpu-ctrl";
+			reg = <0xdd0000 0x10000>;
+		};
+
+		apb@e80000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xe80000 0x10000>;
+			interrupt-parent = <&aic>;
+
+			gpio0: gpio@0400 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porta: gpio-port@0 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <0>;
+				};
+			};
+
+			gpio1: gpio@0800 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0800 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portb: gpio-port@1 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <1>;
+				};
+			};
+
+			gpio2: gpio@0c00 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x0c00 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portc: gpio-port@2 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <2>;
+				};
+			};
+
+			gpio3: gpio@1000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x1000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portd: gpio-port@3 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupts = <3>;
+				};
+			};
+
+			i2c0: i2c@1400 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1400 0x100>;
+				interrupt-parent = <&aic>;
+				interrupts = <4>;
+				clocks = <&chip CLKID_CFG>;
+				pinctrl-0 = <&twsi0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c1: i2c@1800 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1800 0x100>;
+				interrupt-parent = <&aic>;
+				interrupts = <5>;
+				clocks = <&chip CLKID_CFG>;
+				pinctrl-0 = <&twsi1_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			timer0: timer@2c00 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c00 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				interrupts = <8>;
+			};
+
+			timer1: timer@2c14 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c14 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+			};
+
+			timer2: timer@2c28 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c28 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer3: timer@2c3c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c3c 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer4: timer@2c50 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c50 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer5: timer@2c64 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c64 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer6: timer@2c78 {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c78 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			timer7: timer@2c8c {
+				compatible = "snps,dw-apb-timer";
+				reg = <0x2c8c 0x14>;
+				clocks = <&chip CLKID_CFG>;
+				clock-names = "timer";
+				status = "disabled";
+			};
+
+			aic: interrupt-controller@3800 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0x3800 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		chip: chip-control@ea0000 {
+			compatible = "marvell,berlin2q-chip-ctrl";
+			#clock-cells = <1>;
+			#reset-cells = <2>;
+			reg = <0xea0000 0x400>, <0xdd0170 0x10>;
+			clocks = <&refclk>;
+			clock-names = "refclk";
+
+			twsi0_pmux: twsi0-pmux {
+				groups = "G6";
+				function = "twsi0";
+			};
+
+			twsi1_pmux: twsi1-pmux {
+				groups = "G7";
+				function = "twsi1";
+			};
+		};
+
+		ahci: sata@e90000 {
+			compatible = "marvell,berlin2q-ahci", "generic-ahci";
+			reg = <0xe90000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_SATA>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy 0>;
+				status = "disabled";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy 1>;
+				status = "disabled";
+			};
+		};
+
+		sata_phy: phy@e900a0 {
+			compatible = "marvell,berlin2q-sata-phy";
+			reg = <0xe900a0 0x200>;
+			clocks = <&chip CLKID_SATA>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#phy-cells = <1>;
+			status = "disabled";
+
+			sata-phy@0 {
+				reg = <0>;
+			};
+
+			sata-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		usb0: usb@ed0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xed0000 0x10000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB0>;
+			phys = <&usb_phy0>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ee0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xee0000 0x10000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB1>;
+			phys = <&usb_phy1>;
+			phy-names = "usb-phy";
+			status = "disabled";
+		};
+
+		apb@fc0000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0xfc0000 0x10000>;
+			interrupt-parent = <&sic>;
+
+			sm_gpio1: gpio@5000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x5000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				portf: gpio-port@5 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			i2c2: i2c@7000 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x7000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <6>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&twsi2_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c3: i2c@8000 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x8000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <7>;
+				clocks = <&refclk>;
+				pinctrl-0 = <&twsi3_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart0: uart@9000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x9000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <8>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart1: uart@a000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xa000 0x100>;
+				interrupt-parent = <&sic>;
+				interrupts = <9>;
+				clocks = <&refclk>;
+				reg-shift = <2>;
+				pinctrl-0 = <&uart1_pmux>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sm_gpio0: gpio@c000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0xc000 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				porte: gpio-port@4 {
+					compatible = "snps,dw-apb-gpio-port";
+					gpio-controller;
+					#gpio-cells = <2>;
+					snps,nr-gpios = <32>;
+					reg = <0>;
+				};
+			};
+
+			sysctrl: pin-controller@d000 {
+				compatible = "marvell,berlin2q-system-ctrl";
+				reg = <0xd000 0x100>;
+
+				uart0_pmux: uart0-pmux {
+					groups = "GSM12";
+					function = "uart0";
+				};
+
+				uart1_pmux: uart1-pmux {
+					groups = "GSM14";
+					function = "uart1";
+				};
+
+				twsi2_pmux: twsi2-pmux {
+					groups = "GSM13";
+					function = "twsi2";
+				};
+
+				twsi3_pmux: twsi3-pmux {
+					groups = "GSM14";
+					function = "twsi3";
+				};
+			};
+
+			sic: interrupt-controller@e000 {
+				compatible = "snps,dw-apb-ictl";
+				reg = <0xe000 0x30>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
diff --git a/src/arm/cros-adc-thermistors.dtsi b/src/arm/cros-adc-thermistors.dtsi
new file mode 100644
index 000000000000..acd4fe1833f2
--- /dev/null
+++ b/src/arm/cros-adc-thermistors.dtsi
@@ -0,0 +1,44 @@
+/*
+ * Thermistor dts fragment for devices that use Thermistors as
+ * children of the IIO based ADC.
+ *
+ * Currently, used by Exynos5420 based Peach PIT and
+ * Exynos5800 based Peach PI.
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&adc {
+	ncp15wb473@3 {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 3>;
+	};
+	ncp15wb473@4 {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 4>;
+	};
+	ncp15wb473@5 {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 5>;
+	};
+	ncp15wb473@6 {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <47000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc 6>;
+	};
+};
diff --git a/src/arm/cros-ec-keyboard.dtsi b/src/arm/cros-ec-keyboard.dtsi
new file mode 100644
index 000000000000..9c7fb0acae79
--- /dev/null
+++ b/src/arm/cros-ec-keyboard.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Keyboard dts fragment for devices that use cros-ec-keyboard
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/input/input.h>
+
+&cros_ec {
+	keyboard-controller {
+		compatible = "google,cros-ec-keyb";
+		keypad,num-rows = <8>;
+		keypad,num-columns = <13>;
+		google,needs-ghost-filter;
+
+		linux,keymap = <
+			MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
+			MATRIX_KEY(0x00, 0x02, KEY_F1)
+			MATRIX_KEY(0x00, 0x03, KEY_B)
+			MATRIX_KEY(0x00, 0x04, KEY_F10)
+			MATRIX_KEY(0x00, 0x06, KEY_N)
+			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
+			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+
+			MATRIX_KEY(0x01, 0x01, KEY_ESC)
+			MATRIX_KEY(0x01, 0x02, KEY_F4)
+			MATRIX_KEY(0x01, 0x03, KEY_G)
+			MATRIX_KEY(0x01, 0x04, KEY_F7)
+			MATRIX_KEY(0x01, 0x06, KEY_H)
+			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
+			MATRIX_KEY(0x01, 0x09, KEY_F9)
+			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+
+			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
+			MATRIX_KEY(0x02, 0x01, KEY_TAB)
+			MATRIX_KEY(0x02, 0x02, KEY_F3)
+			MATRIX_KEY(0x02, 0x03, KEY_T)
+			MATRIX_KEY(0x02, 0x04, KEY_F6)
+			MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
+			MATRIX_KEY(0x02, 0x06, KEY_Y)
+			MATRIX_KEY(0x02, 0x07, KEY_102ND)
+			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
+			MATRIX_KEY(0x02, 0x09, KEY_F8)
+
+			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
+			MATRIX_KEY(0x03, 0x02, KEY_F2)
+			MATRIX_KEY(0x03, 0x03, KEY_5)
+			MATRIX_KEY(0x03, 0x04, KEY_F5)
+			MATRIX_KEY(0x03, 0x06, KEY_6)
+			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+
+			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+			MATRIX_KEY(0x04, 0x01, KEY_A)
+			MATRIX_KEY(0x04, 0x02, KEY_D)
+			MATRIX_KEY(0x04, 0x03, KEY_F)
+			MATRIX_KEY(0x04, 0x04, KEY_S)
+			MATRIX_KEY(0x04, 0x05, KEY_K)
+			MATRIX_KEY(0x04, 0x06, KEY_J)
+			MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
+			MATRIX_KEY(0x04, 0x09, KEY_L)
+			MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
+			MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
+
+			MATRIX_KEY(0x05, 0x01, KEY_Z)
+			MATRIX_KEY(0x05, 0x02, KEY_C)
+			MATRIX_KEY(0x05, 0x03, KEY_V)
+			MATRIX_KEY(0x05, 0x04, KEY_X)
+			MATRIX_KEY(0x05, 0x05, KEY_COMMA)
+			MATRIX_KEY(0x05, 0x06, KEY_M)
+			MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
+			MATRIX_KEY(0x05, 0x08, KEY_SLASH)
+			MATRIX_KEY(0x05, 0x09, KEY_DOT)
+			MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
+
+			MATRIX_KEY(0x06, 0x01, KEY_1)
+			MATRIX_KEY(0x06, 0x02, KEY_3)
+			MATRIX_KEY(0x06, 0x03, KEY_4)
+			MATRIX_KEY(0x06, 0x04, KEY_2)
+			MATRIX_KEY(0x06, 0x05, KEY_8)
+			MATRIX_KEY(0x06, 0x06, KEY_7)
+			MATRIX_KEY(0x06, 0x08, KEY_0)
+			MATRIX_KEY(0x06, 0x09, KEY_9)
+			MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
+			MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
+			MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
+
+			MATRIX_KEY(0x07, 0x01, KEY_Q)
+			MATRIX_KEY(0x07, 0x02, KEY_E)
+			MATRIX_KEY(0x07, 0x03, KEY_R)
+			MATRIX_KEY(0x07, 0x04, KEY_W)
+			MATRIX_KEY(0x07, 0x05, KEY_I)
+			MATRIX_KEY(0x07, 0x06, KEY_U)
+			MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
+			MATRIX_KEY(0x07, 0x08, KEY_P)
+			MATRIX_KEY(0x07, 0x09, KEY_O)
+			MATRIX_KEY(0x07, 0x0b, KEY_UP)
+			MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
+		>;
+	};
+};
diff --git a/src/arm/cx92755.dtsi b/src/arm/cx92755.dtsi
new file mode 100644
index 000000000000..490c08075e67
--- /dev/null
+++ b/src/arm/cx92755.dtsi
@@ -0,0 +1,113 @@
+/*
+ * Device Tree Include file for the Conexant Digicolor CX92755 SoC
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ *  Copyright (C) 2014 Paradox Innovation Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "cnxt,cx92755";
+
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+	main_clk: main_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <200000000>;
+	};
+
+	intc: interrupt-controller@f0000040 {
+		compatible = "cnxt,cx92755-ic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf0000040 0x40>;
+		syscon = <&uc_regs>;
+	};
+
+	timer@f0000fc0 {
+		compatible = "cnxt,cx92755-timer";
+		reg = <0xf0000fc0 0x40>;
+		interrupts = <19>, <31>, <34>, <35>, <52>, <53>, <54>, <55>;
+		clocks = <&main_clk>;
+	};
+
+	uc_regs: syscon@f00003a0 {
+		compatible = "cnxt,cx92755-uc", "syscon";
+		reg = <0xf00003a0 0x10>;
+	};
+
+	uart0: uart@f0000740 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000740 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <44>;
+		status = "disabled";
+	};
+
+	uart1: uart@f0000760 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000760 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <45>;
+		status = "disabled";
+	};
+
+	uart2: uart@f0000780 {
+		compatible = "cnxt,cx92755-usart";
+		reg = <0xf0000780 0x20>;
+		clocks = <&main_clk>;
+		interrupts = <46>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/cx92755_equinox.dts b/src/arm/cx92755_equinox.dts
new file mode 100644
index 000000000000..f33bf5635d47
--- /dev/null
+++ b/src/arm/cx92755_equinox.dts
@@ -0,0 +1,74 @@
+/*
+ * Device Tree file for the Conexant Equinox CX92755 EVK
+ *
+ * Author: Baruch Siach <baruch@tkos.co.il>
+ *
+ *  Copyright (C) 2014 Paradox Innovation Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "cx92755.dtsi"
+
+/ {
+	model = "Conexant Equinox CX92755 EVK";
+	compatible = "cnxt,equinox", "cnxt,cx92755";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory@0 {
+		reg = <0 0x8000000>;
+		device_type = "memory";
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/da850-enbw-cmc.dts b/src/arm/da850-enbw-cmc.dts
new file mode 100644
index 000000000000..e750ab9086d5
--- /dev/null
+++ b/src/arm/da850-enbw-cmc.dts
@@ -0,0 +1,30 @@
+/*
+ * Device Tree for AM1808 EnBW CMC board
+ *
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+/dts-v1/;
+#include "da850.dtsi"
+
+/ {
+	compatible = "enbw,cmc", "ti,da850";
+	model = "EnBW CMC";
+
+	soc {
+		serial0: serial@1c42000 {
+			status = "okay";
+		};
+		serial1: serial@1d0c000 {
+			status = "okay";
+		};
+		serial2: serial@1d0d000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/da850-evm.dts b/src/arm/da850-evm.dts
new file mode 100644
index 000000000000..4f935ad9f27b
--- /dev/null
+++ b/src/arm/da850-evm.dts
@@ -0,0 +1,244 @@
+/*
+ * Device Tree for DA850 EVM board
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation, version 2.
+ */
+/dts-v1/;
+#include "da850.dtsi"
+
+/ {
+	compatible = "ti,da850-evm", "ti,da850";
+	model = "DA850/AM1808/OMAP-L138 EVM";
+
+	soc {
+		pmx_core: pinmux@1c14120 {
+			status = "okay";
+
+			mcasp0_pins: pinmux_mcasp0_pins {
+				pinctrl-single,bits = <
+					/*
+					 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
+					 * AFSR, AMUTE
+					 */
+					0x00 0x11111111 0xffffffff
+					/* AXR11, AXR12 */
+					0x04 0x00011000 0x000ff000
+				>;
+			};
+		};
+		serial0: serial@1c42000 {
+			status = "okay";
+		};
+		serial1: serial@1d0c000 {
+			status = "okay";
+		};
+		serial2: serial@1d0d000 {
+			status = "okay";
+		};
+		rtc0: rtc@1c23000 {
+			status = "okay";
+		};
+		i2c0: i2c@1c22000 {
+			status = "okay";
+			clock-frequency = <100000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+
+			tps: tps@48 {
+				reg = <0x48>;
+			};
+			tlv320aic3106: tlv320aic3106@18 {
+				#sound-dai-cells = <0>;
+				compatible = "ti,tlv320aic3106";
+				reg = <0x18>;
+				status = "okay";
+
+				/* Regulators */
+				IOVDD-supply = <&vdcdc2_reg>;
+				/* Derived from VBAT: Baseboard 3.3V / 1.8V */
+				AVDD-supply = <&vbat>;
+				DRVDD-supply = <&vbat>;
+				DVDD-supply = <&vbat>;
+			};
+
+		};
+		wdt: wdt@1c21000 {
+			status = "okay";
+		};
+		mmc0: mmc@1c40000 {
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+		};
+		spi1: spi@1f0e000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
+			flash: m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p64";
+				spi-max-frequency = <30000000>;
+				reg = <0>;
+				partition@0 {
+					label = "U-Boot-SPL";
+					reg = <0x00000000 0x00010000>;
+					read-only;
+				};
+				partition@1 {
+					label = "U-Boot";
+					reg = <0x00010000 0x00080000>;
+					read-only;
+				};
+				partition@2 {
+					label = "U-Boot-Env";
+					reg = <0x00090000 0x00010000>;
+					read-only;
+				};
+				partition@3 {
+					label = "Kernel";
+					reg = <0x000a0000 0x00280000>;
+				};
+				partition@4 {
+					label = "Filesystem";
+					reg = <0x00320000 0x00400000>;
+				};
+				partition@5 {
+					label = "MAC-Address";
+					reg = <0x007f0000 0x00010000>;
+					read-only;
+				};
+			};
+		};
+		mdio: mdio@1e24000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mdio_pins>;
+			bus_freq = <2200000>;
+		};
+		eth0: ethernet@1e20000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mii_pins>;
+		};
+		gpio: gpio@1e26000 {
+			status = "okay";
+		};
+	};
+	nand_cs3@62000000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&nand_cs3_pins>;
+	};
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DA850/OMAP-L138 EVM";
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out";
+		simple-audio-card,routing =
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			system-clock-frequency = <24576000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24576000>;
+		};
+	};
+};
+
+/include/ "tps6507x.dtsi"
+
+&tps {
+	vdcdc1_2-supply = <&vbat>;
+	vdcdc3-supply = <&vbat>;
+	vldo1_2-supply = <&vbat>;
+
+	regulators {
+		vdcdc1_reg: regulator@0 {
+			regulator-name = "VDCDC1_3.3V";
+			regulator-min-microvolt = <3150000>;
+			regulator-max-microvolt = <3450000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdcdc2_reg: regulator@1 {
+			regulator-name = "VDCDC2_3.3V";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <3450000>;
+			regulator-always-on;
+			regulator-boot-on;
+			ti,defdcdc_default = <1>;
+		};
+
+		vdcdc3_reg: regulator@2 {
+			regulator-name = "VDCDC3_1.2V";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on;
+			regulator-boot-on;
+			ti,defdcdc_default = <1>;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "LDO1_1.8V";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "LDO2_1.2V";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1320000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 0 0
+		0 0 0 0
+		0 0 0 1
+		2 0 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
diff --git a/src/arm/da850.dtsi b/src/arm/da850.dtsi
new file mode 100644
index 000000000000..0bd98cd00816
--- /dev/null
+++ b/src/arm/da850.dtsi
@@ -0,0 +1,306 @@
+/*
+ * Copyright 2012 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	arm {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		intc: interrupt-controller {
+			compatible = "ti,cp-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,intc-size = <100>;
+			reg = <0xfffee000 0x2000>;
+		};
+	};
+	soc {
+		compatible = "simple-bus";
+		model = "da850";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x01c00000 0x400000>;
+		interrupt-parent = <&intc>;
+
+		pmx_core: pinmux@1c14120 {
+			compatible = "pinctrl-single";
+			reg = <0x14120 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0xf>;
+			status = "disabled";
+
+			nand_cs3_pins: pinmux_nand_pins {
+				pinctrl-single,bits = <
+					/* EMA_OE, EMA_WE */
+					0x1c 0x00110000  0x00ff0000
+					/* EMA_CS[4],EMA_CS[3]*/
+					0x1c 0x00000110  0x00000ff0
+					/*
+					 * EMA_D[0], EMA_D[1], EMA_D[2],
+					 * EMA_D[3], EMA_D[4], EMA_D[5],
+					 * EMA_D[6], EMA_D[7]
+					 */
+					0x24 0x11111111  0xffffffff
+					/* EMA_A[1], EMA_A[2] */
+					0x30 0x01100000  0x0ff00000
+				>;
+			};
+			i2c0_pins: pinmux_i2c0_pins {
+				pinctrl-single,bits = <
+					/* I2C0_SDA,I2C0_SCL */
+					0x10 0x00002200 0x0000ff00
+				>;
+			};
+			mmc0_pins: pinmux_mmc_pins {
+				pinctrl-single,bits = <
+					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
+					 * MMCSD0_DAT[1] MMCSD0_DAT[0]
+					 * MMCSD0_CMD    MMCSD0_CLK
+					 */
+					0x28 0x00222222  0x00ffffff
+				>;
+			};
+			ehrpwm0a_pins: pinmux_ehrpwm0a_pins {
+				pinctrl-single,bits = <
+					/* EPWM0A */
+					0xc 0x00000002 0x0000000f
+				>;
+			};
+			ehrpwm0b_pins: pinmux_ehrpwm0b_pins {
+				pinctrl-single,bits = <
+					/* EPWM0B */
+					0xc 0x00000020 0x000000f0
+				>;
+			};
+			ehrpwm1a_pins: pinmux_ehrpwm1a_pins {
+				pinctrl-single,bits = <
+					/* EPWM1A */
+					0x14 0x00000002 0x0000000f
+				>;
+			};
+			ehrpwm1b_pins: pinmux_ehrpwm1b_pins {
+				pinctrl-single,bits = <
+					/* EPWM1B */
+					0x14 0x00000020 0x000000f0
+				>;
+			};
+			ecap0_pins: pinmux_ecap0_pins {
+				pinctrl-single,bits = <
+					/* ECAP0_APWM0 */
+					0x8 0x20000000 0xf0000000
+				>;
+			};
+			ecap1_pins: pinmux_ecap1_pins {
+				pinctrl-single,bits = <
+					/* ECAP1_APWM1 */
+					0x4 0x40000000 0xf0000000
+				>;
+			};
+			ecap2_pins: pinmux_ecap2_pins {
+				pinctrl-single,bits = <
+					/* ECAP2_APWM2 */
+					0x4 0x00000004 0x0000000f
+				>;
+			};
+			spi1_pins: pinmux_spi_pins {
+				pinctrl-single,bits = <
+					/* SIMO, SOMI, CLK */
+					0x14 0x00110100 0x00ff0f00
+				>;
+			};
+			spi1_cs0_pin: pinmux_spi1_cs0 {
+				pinctrl-single,bits = <
+					/* CS0 */
+					0x14 0x00000010 0x000000f0
+				>;
+			};
+			mdio_pins: pinmux_mdio_pins {
+				pinctrl-single,bits = <
+					/* MDIO_CLK, MDIO_D */
+					0x10 0x00000088 0x000000ff
+				>;
+			};
+			mii_pins: pinmux_mii_pins {
+				pinctrl-single,bits = <
+					/*
+					 * MII_TXEN, MII_TXCLK, MII_COL
+					 * MII_TXD_3, MII_TXD_2, MII_TXD_1
+					 * MII_TXD_0
+					 */
+					0x8 0x88888880 0xfffffff0
+					/*
+					 * MII_RXER, MII_CRS, MII_RXCLK
+					 * MII_RXDV, MII_RXD_3, MII_RXD_2
+					 * MII_RXD_1, MII_RXD_0
+					 */
+					0xc 0x88888888 0xffffffff
+				>;
+			};
+
+		};
+		edma0: edma@01c00000 {
+			compatible = "ti,edma3";
+			reg =	<0x0 0x10000>;
+			interrupts = <11 13 12>;
+			#dma-cells = <1>;
+		};
+		serial0: serial@1c42000 {
+			compatible = "ns16550a";
+			reg = <0x42000 0x100>;
+			reg-shift = <2>;
+			interrupts = <25>;
+			status = "disabled";
+		};
+		serial1: serial@1d0c000 {
+			compatible = "ns16550a";
+			reg = <0x10c000 0x100>;
+			reg-shift = <2>;
+			interrupts = <53>;
+			status = "disabled";
+		};
+		serial2: serial@1d0d000 {
+			compatible = "ns16550a";
+			reg = <0x10d000 0x100>;
+			reg-shift = <2>;
+			interrupts = <61>;
+			status = "disabled";
+		};
+		rtc0: rtc@1c23000 {
+			compatible = "ti,da830-rtc";
+			reg = <0x23000 0x1000>;
+			interrupts = <19
+				      19>;
+			status = "disabled";
+		};
+		i2c0: i2c@1c22000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x22000 0x1000>;
+			interrupts = <15>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		wdt: wdt@1c21000 {
+			compatible = "ti,davinci-wdt";
+			reg = <0x21000 0x1000>;
+			status = "disabled";
+		};
+		mmc0: mmc@1c40000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x40000 0x1000>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+		ehrpwm0: ehrpwm@01f00000 {
+			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			#pwm-cells = <3>;
+			reg = <0x300000 0x2000>;
+			status = "disabled";
+		};
+		ehrpwm1: ehrpwm@01f02000 {
+			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+			#pwm-cells = <3>;
+			reg = <0x302000 0x2000>;
+			status = "disabled";
+		};
+		ecap0: ecap@01f06000 {
+			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x306000 0x80>;
+			status = "disabled";
+		};
+		ecap1: ecap@01f07000 {
+			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x307000 0x80>;
+			status = "disabled";
+		};
+		ecap2: ecap@01f08000 {
+			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+			#pwm-cells = <3>;
+			reg = <0x308000 0x80>;
+			status = "disabled";
+		};
+		spi1: spi@1f0e000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "ti,da830-spi";
+			reg = <0x30e000 0x1000>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <1>;
+			interrupts = <56>;
+			status = "disabled";
+		};
+		mdio: mdio@1e24000 {
+			compatible = "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x224000 0x1000>;
+		};
+		eth0: ethernet@1e20000 {
+			compatible = "ti,davinci-dm6467-emac";
+			reg = <0x220000 0x4000>;
+			ti,davinci-ctrl-reg-offset = <0x3000>;
+			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+			ti,davinci-ctrl-ram-offset = <0>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <33
+					34
+					35
+					36
+					>;
+		};
+		gpio: gpio@1e26000 {
+			compatible = "ti,dm6441-gpio";
+			gpio-controller;
+			reg = <0x226000 0x1000>;
+			interrupts = <42 IRQ_TYPE_EDGE_BOTH
+				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
+				45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
+				47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
+				49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
+			ti,ngpio = <144>;
+			ti,davinci-gpio-unbanked = <0>;
+			status = "disabled";
+		};
+
+		mcasp0: mcasp@01d00000 {
+			compatible = "ti,da830-mcasp-audio";
+			reg = <0x100000 0x2000>,
+			      <0x102000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <54>;
+			interrupt-names = "common";
+			status = "disabled";
+			dmas = <&edma0 1>,
+				<&edma0 0>;
+			dma-names = "tx", "rx";
+		};
+	};
+	nand_cs3@62000000 {
+		compatible = "ti,davinci-nand";
+		reg = <0x62000000 0x807ff
+		       0x68000000 0x8000>;
+		ti,davinci-chipselect = <1>;
+		ti,davinci-mask-ale = <0>;
+		ti,davinci-mask-cle = <0>;
+		ti,davinci-mask-chipsel = <0>;
+		ti,davinci-ecc-mode = "hw";
+		ti,davinci-ecc-bits = <4>;
+		ti,davinci-nand-use-bbt;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/dm8168-evm.dts b/src/arm/dm8168-evm.dts
new file mode 100644
index 000000000000..857d0289ad4d
--- /dev/null
+++ b/src/arm/dm8168-evm.dts
@@ -0,0 +1,129 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dm816x.dtsi"
+
+/ {
+	model = "DM8168 EVM";
+	compatible = "ti,dm8168-evm", "ti,dm8168";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000	/* 1 GB */
+		       0xc0000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* FDC6331L controlled by SD_POW pin */
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&dm816x_pinmux {
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0a94, PIN_INPUT | MUX_MODE0)	/* SPI_SCLK */
+			DM816X_IOPAD(0x0a98, PIN_OUTPUT | MUX_MODE0)	/* SPI_SCS0 */
+			DM816X_IOPAD(0x0aa8, PIN_INPUT | MUX_MODE0)	/* SPI_D0 */
+			DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0)	/* SPI_D1 */
+		>;
+	};
+};
+
+&i2c1 {
+	extgpio0: pcf8575@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c2 {
+	extgpio1: pcf8575@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		linux,mtd-name= "micron,mt29f2g16aadwp";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	m25p80@0 {
+		compatible = "w25x32";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
diff --git a/src/arm/dm816x-clocks.dtsi b/src/arm/dm816x-clocks.dtsi
new file mode 100644
index 000000000000..50d9d338fbe9
--- /dev/null
+++ b/src/arm/dm816x-clocks.dtsi
@@ -0,0 +1,250 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&scrm {
+	main_fapll: main_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x400 0x40>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>,
+				<6>, <7>;
+		clock-output-names = "main_pll_clk1",
+				     "main_pll_clk2",
+				     "main_pll_clk3",
+				     "main_pll_clk4",
+				     "main_pll_clk5",
+				     "main_pll_clk6",
+				     "main_pll_clk7";
+	};
+
+	ddr_fapll: ddr_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x440 0x30>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>;
+		clock-output-names = "ddr_pll_clk1",
+				     "ddr_pll_clk2",
+				     "ddr_pll_clk3",
+				     "ddr_pll_clk4";
+	};
+
+	video_fapll: video_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x470 0x30>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>;
+		clock-output-names = "video_pll_clk1",
+				     "video_pll_clk2",
+				     "video_pll_clk3";
+	};
+
+	audio_fapll: audio_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x4a0 0x30>;
+		clocks = <&main_fapll 7>, < &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>;
+		clock-output-names = "audio_pll_clk1",
+				     "audio_pll_clk2",
+				     "audio_pll_clk3",
+				     "audio_pll_clk4",
+				     "audio_pll_clk5";
+	};
+};
+
+&scrm_clocks {
+	secure_32k_ck: secure_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+};
+
+/* 0x48180000 */
+&prcm_clocks {
+	clkout_pre_ck: clkout_pre_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
+			  &audio_fapll 1>;
+		reg = <0x100>;
+	};
+
+	clkout_div_ck: clkout_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout_pre_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <8>;
+		reg = <0x100>;
+	};
+
+	clkout_ck: clkout_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkout_div_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x100>;
+	};
+
+	/* CM_DPLL clocks p1795 */
+	sysclk1_ck: sysclk1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 1>;
+		ti,max-div = <7>;
+		reg = <0x0300>;
+	};
+
+	sysclk2_ck: sysclk2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 2>;
+		ti,max-div = <7>;
+		reg = <0x0304>;
+	};
+
+	sysclk3_ck: sysclk3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 3>;
+		ti,max-div = <7>;
+		reg = <0x0308>;
+	};
+
+	sysclk4_ck: sysclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 4>;
+		ti,max-div = <1>;
+		reg = <0x030c>;
+	};
+
+	sysclk5_ck: sysclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sysclk4_ck>;
+		ti,max-div = <1>;
+		reg = <0x0310>;
+	};
+
+	sysclk6_ck: sysclk6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 4>;
+		ti,dividers = <2>, <4>;
+		reg = <0x0314>;
+	};
+
+	sysclk10_ck: sysclk10_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&ddr_fapll 2>;
+		ti,max-div = <7>;
+		reg = <0x0324>;
+	};
+
+	sysclk24_ck: sysclk24_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&main_fapll 5>;
+		ti,max-div = <7>;
+		reg = <0x03b4>;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sysclk2_ck>;
+		ti,bit-shift = <1>;
+                reg = <0x15dc>;
+	};
+
+	audio_pll_a_ck: audio_pll_a_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&audio_fapll 1>;
+		ti,max-div = <7>;
+		reg = <0x035c>;
+	};
+
+	sysclk18_ck: sysclk18_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
+		reg = <0x0378>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0390>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0394>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x0398>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x039c>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a0>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a4>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
+		reg = <0x03a8>;
+	};
+};
diff --git a/src/arm/dm816x.dtsi b/src/arm/dm816x.dtsi
new file mode 100644
index 000000000000..d98d0f7de380
--- /dev/null
+++ b/src/arm/dm816x.dtsi
@@ -0,0 +1,392 @@
+/*
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,dm816";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the dm816x interconnect.
+	 * The real dm816x interconnect network is quite complex. Since
+	 * it will not bring real advantage to represent that in DT
+	 * for the moment, just use a fake OCP bus entry to represent
+	 * the whole bus hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap3-l3-smx", "simple-bus";
+		reg = <0x44000000 0x10000>;
+		interrupts = <9 10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		prcm: prcm@48180000 {
+			compatible = "ti,dm816-prcm";
+			reg = <0x48180000 0x4000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@48140000 {
+			compatible = "ti,dm816-scrm", "simple-bus";
+			reg = <0x48140000 0x21000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48140000 0x21000>;
+
+			dm816x_pinmux: pinmux@800 {
+				compatible = "pinctrl-single";
+				reg = <0x800 0x50a>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0xf>;
+			};
+
+			/* Device Configuration Registers */
+			scm_conf: syscon@600 {
+				compatible = "syscon";
+				reg = <0x600 0x110>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
+			reg =   <0x49000000 0x10000>,
+			        <0x44e10f90 0x40>;
+			interrupts = <12 13 14>;
+			#dma-cells = <1>;
+		};
+
+		elm: elm@48080000 {
+			compatible = "ti,816-elm";
+			ti,hwmods = "elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <4>;
+		};
+
+		gpio1: gpio@48032000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio1";
+			reg = <0x48032000 0x1000>;
+			interrupts = <97>;
+		};
+
+		gpio2: gpio@4804c000 {
+			compatible = "ti,omap3-gpio";
+			ti,hwmods = "gpio2";
+			reg = <0x4804c000 0x1000>;
+			interrupts = <99>;
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x50000000 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <100>;
+			gpmc,num-cs = <6>;
+			gpmc,num-waitpins = <2>;
+		};
+
+		i2c1: i2c@48028000 {
+			compatible = "ti,omap4-i2c";
+			ti,hwmods = "i2c1";
+			reg = <0x48028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <70>;
+			dmas = <&edma 58 &edma 59>;
+			dma-names = "tx", "rx";
+		};
+
+		i2c2: i2c@4802a000 {
+			compatible = "ti,omap4-i2c";
+			ti,hwmods = "i2c2";
+			reg = <0x4802a000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <71>;
+			dmas = <&edma 60 &edma 61>;
+			dma-names = "tx", "rx";
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,dm816-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		mailbox: mailbox@480c8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480c8000 0x2000>;
+			interrupts = <77>;
+			ti,hwmods = "mailbox";
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			mbox_dsp: mbox_dsp {
+				ti,mbox-tx = <3 0 0>;
+				ti,mbox-rx = <0 0 0>;
+			};
+		};
+
+		mdio: mdio@4a100800 {
+			compatible = "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4a100800 0x100>;
+			ti,hwmods = "davinci_mdio";
+			bus_freq = <1000000>;
+			phy0: ethernet-phy@0 {
+				reg = <1>;
+			};
+			phy1: ethernet-phy@1 {
+				reg = <2>;
+			};
+		};
+
+		eth0: ethernet@4a100000 {
+			compatible = "ti,dm816-emac";
+			ti,hwmods = "emac0";
+			reg = <0x4a100000 0x800
+			       0x4a100900 0x3700>;
+			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
+			ti,davinci-ctrl-reg-offset = <0>;
+			ti,davinci-ctrl-mod-reg-offset = <0x900>;
+			ti,davinci-ctrl-ram-offset = <0x2000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			interrupts = <40 41 42 43>;
+			phy-handle = <&phy0>;
+		};
+
+		eth1: ethernet@4a120000 {
+			compatible = "ti,dm816-emac";
+			ti,hwmods = "emac1";
+			reg = <0x4a120000 0x4000>;
+			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
+			ti,davinci-ctrl-reg-offset = <0>;
+			ti,davinci-ctrl-mod-reg-offset = <0x900>;
+			ti,davinci-ctrl-ram-offset = <0x2000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			interrupts = <44 45 46 47>;
+			phy-handle = <&phy1>;
+		};
+
+		mcspi1: spi@48030000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48030000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <65>;
+			ti,spi-num-cs = <4>;
+			ti,hwmods = "mcspi1";
+			dmas = <&edma 16 &edma 17
+				&edma 18 &edma 19>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x48060000 0x11000>;
+			ti,hwmods = "mmc1";
+			interrupts = <64>;
+			dmas = <&edma 24 &edma 25>;
+			dma-names = "tx", "rx";
+		};
+
+		timer1: timer@4802e000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x4802e000 0x2000>;
+			interrupts = <67>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48040000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48040000 0x2000>;
+			interrupts = <68>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48042000 0x2000>;
+			interrupts = <69>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48044000 0x2000>;
+			interrupts = <92>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48046000 0x2000>;
+			interrupts = <93>;
+			ti,hwmods = "timer5";
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x48048000 0x2000>;
+			interrupts = <94>;
+			ti,hwmods = "timer6";
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,dm816-timer";
+			reg = <0x4804a000 0x2000>;
+			interrupts = <95>;
+			ti,hwmods = "timer7";
+		};
+
+		uart1: uart@48020000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart1";
+			reg = <0x48020000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <72>;
+			dmas = <&edma 26 &edma 27>;
+			dma-names = "tx", "rx";
+		};
+
+		uart2: uart@48022000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart2";
+			reg = <0x48022000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <73>;
+			dmas = <&edma 28 &edma 29>;
+			dma-names = "tx", "rx";
+		};
+
+		uart3: uart@48024000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart3";
+			reg = <0x48024000 0x2000>;
+			clock-frequency = <48000000>;
+			interrupts = <74>;
+			dmas = <&edma 30 &edma 31>;
+			dma-names = "tx", "rx";
+		};
+
+		/* NOTE: USB needs a transceiver driver for phys to work */
+		usb: usb_otg_hs@47401000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47401000 0x400000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "usb_otg_hs";
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x47401400 0x400
+				       0x47401000 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-am33xx";
+				status = "disabled";
+				reg = <0x47401c00 0x400
+				       0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+			};
+		};
+
+		wd_timer2: wd_timer@480c2000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer";
+			reg = <0x480c2000 0x1000>;
+			interrupts = <0>;
+		};
+	};
+};
+
+#include "dm816x-clocks.dtsi"
diff --git a/src/arm/dove-cm-a510.dts b/src/arm/dove-cm-a510.dts
new file mode 100644
index 000000000000..50c0d6904497
--- /dev/null
+++ b/src/arm/dove-cm-a510.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Compulab CM-A510";
+	compatible = "compulab,cm-a510", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff --git a/src/arm/dove-cubox-es.dts b/src/arm/dove-cubox-es.dts
new file mode 100644
index 000000000000..e28ef056dd17
--- /dev/null
+++ b/src/arm/dove-cubox-es.dts
@@ -0,0 +1,12 @@
+#include "dove-cubox.dts"
+
+/ {
+	model = "SolidRun CuBox (Engineering Sample)";
+	compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove";
+};
+
+&sdio0 {
+	/* sdio0 card detect is connected to wrong pin on CuBox ES */
+	cd-gpios = <&gpio0 12 1>;
+	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
+};
diff --git a/src/arm/dove-cubox.dts b/src/arm/dove-cubox.dts
new file mode 100644
index 000000000000..aae7efc09b0b
--- /dev/null
+++ b/src/arm/dove-cubox.dts
@@ -0,0 +1,133 @@
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "SolidRun CuBox";
+	compatible = "solidrun,cubox", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_18>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power";
+			gpios = <&gpio0 18 1>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 1 0>;
+			pinctrl-0 = <&pmx_gpio_1>;
+			pinctrl-names = "default";
+		};
+	};
+
+	clocks {
+		/* 25MHz reference crystal */
+		ref25: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 19 1>;
+		pinctrl-0 = <&pmx_gpio_19>;
+		pinctrl-names = "default";
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+&ethphy {
+	compatible = "marvell,88e1310";
+	reg = <1>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	si5351: clock-generator {
+		compatible = "silabs,si5351a-msop";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#clock-cells = <1>;
+
+		/* connect xtal input to 25MHz reference */
+		clocks = <&ref25>;
+
+		/* connect xtal input as source of pll0 and pll1 */
+		silabs,pll-source = <0 0>, <1 0>;
+
+		clkout0 {
+			reg = <0>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <0>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+
+		clkout2 {
+			reg = <2>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+		};
+	};
+};
+
+&sdio0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Winbond W25Q32BV */
+	spi-flash@0 {
+		compatible = "st,w25q32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&audio1 {
+	status = "okay";
+	clocks = <&gate_clk 13>, <&si5351 2>;
+	clock-names = "internal", "extclk";
+	pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
+	pinctrl-names = "default";
+};
diff --git a/src/arm/dove-d2plug.dts b/src/arm/dove-d2plug.dts
new file mode 100644
index 000000000000..c11d3636c8e5
--- /dev/null
+++ b/src/arm/dove-d2plug.dts
@@ -0,0 +1,69 @@
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D2Plug";
+	compatible = "globalscale,d2plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 0 1>;
+		};
+
+		wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 1 1>;
+		};
+
+		bluetooth-act {
+			label = "bt-act";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+&mdio { status = "okay"; };
+&eth { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25L3205D */
+	spi-flash@0 {
+		compatible = "st,m25l3205d";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
diff --git a/src/arm/dove-d3plug.dts b/src/arm/dove-d3plug.dts
new file mode 100644
index 000000000000..f5f59bb5a534
--- /dev/null
+++ b/src/arm/dove-d3plug.dts
@@ -0,0 +1,103 @@
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Globalscale D3Plug";
+	compatible = "globalscale,d3plug", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
+		pinctrl-names = "default";
+
+		wlan-act {
+			label = "wlan-act";
+			gpios = <&gpio0 0 1>;
+		};
+
+		wlan-ap {
+			label = "wlan-ap";
+			gpios = <&gpio0 1 1>;
+		};
+
+		status {
+			label = "status";
+			gpios = <&gpio0 2 1>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 8 0>;
+			pinctrl-0 = <&pmx_gpio_8>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&uart0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+/* Samsung M8G2F eMMC */
+&sdio0 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+};
+
+/* Marvell SD8787 WLAN/BT */
+&sdio1 {
+	status = "okay";
+	non-removable;
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 2M Flash Macronix MX25L1605D */
+	spi-flash@0 {
+		compatible = "st,m25l1605d";
+		spi-max-frequency = <86000000>;
+		reg = <0>;
+	};
+};
+
+&pcie {
+	status = "okay";
+	/* Fresco Logic USB3.0 xHCI controller */
+	pcie-port@0 {
+		status = "okay";
+		reset-gpios = <&gpio0 26 1>;
+		reset-delay-us = <20000>;
+		pinctrl-0 = <&pmx_camera_gpio>;
+		pinctrl-names = "default";
+	};
+	/* Mini-PCIe slot */
+	pcie-port@1 {
+		status = "okay";
+		reset-gpios = <&gpio0 25 1>;
+	};
+};
diff --git a/src/arm/dove-dove-db.dts b/src/arm/dove-dove-db.dts
new file mode 100644
index 000000000000..bb725dca3a10
--- /dev/null
+++ b/src/arm/dove-dove-db.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+#include "dove.dtsi"
+
+/ {
+	model = "Marvell DB-MV88AP510-BP Development Board";
+	compatible = "marvell,dove-db", "marvell,dove";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+};
+
+&uart0 { status = "okay"; };
+&uart1 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sdio1 { status = "okay"; };
+&sata0 { status = "okay"; };
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
+	spi-flash@0 {
+		compatible = "st,m25p32";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	  status = "okay";
+};
diff --git a/src/arm/dove.dtsi b/src/arm/dove.dtsi
new file mode 100644
index 000000000000..a5441d5482a6
--- /dev/null
+++ b/src/arm/dove.dtsi
@@ -0,0 +1,649 @@
+/include/ "skeleton.dtsi"
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	compatible = "marvell,dove";
+	model = "Marvell Armada 88AP510 SoC";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "marvell,pj4a", "marvell,sheeva-v7";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+	};
+
+	l2: l2-cache {
+		compatible = "marvell,tauros2-cache";
+		marvell,tauros2-cache-features = <0>;
+	};
+
+	mbus {
+		compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
+		pcie-io-aperture  = <0xf2000000 0x00200000>; /*   2M I/O space */
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000   /* MBUS regs  1M */
+			  MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000   /* AXI  regs 16M */
+			  MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
+			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
+			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
+
+		pcie: pcie-controller {
+			compatible = "marvell,dove-pcie";
+			status = "disabled";
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&intc>;
+			bus-range = <0x00 0xff>;
+
+			ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
+			          0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
+				  0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0   /* Port 0.0 Mem */
+				  0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0   /* Port 0.0 I/O */
+				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
+				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
+
+			pcie-port@0 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				clocks = <&gate_clk 4>;
+				marvell,pcie-port = <0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 16>;
+			};
+
+			pcie-port@1 {
+				device_type = "pci";
+				status = "disabled";
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				clocks = <&gate_clk 5>;
+				marvell,pcie-port = <1>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 18>;
+			};
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000   /* MBUS regs  1M */
+				  0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000   /* AXI  regs 16M */
+				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
+				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
+
+			spi0: spi-ctrl@10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <6>;
+				reg = <0x10600 0x28>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_spi0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c0: i2c-ctrl@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <11>;
+				clock-frequency = <400000>;
+				timeout-ms = <1000>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <7>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&core_clk 0>;
+				pinctrl-0 = <&pmx_uart1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			uart2: serial@12200 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart3: serial@12300 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			spi1: spi-ctrl@14600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <1>;
+				interrupts = <5>;
+				reg = <0x14600 0x28>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			mbusc: mbus-ctrl@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x80>, <0x800100 0x8>;
+			};
+
+			sysc: system-ctrl@20000 {
+				compatible = "marvell,orion-system-controller";
+				reg = <0x20000 0x110>;
+			};
+
+			bridge_intc: bridge-interrupt-ctrl@20110 {
+				compatible = "marvell,orion-bridge-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20110 0x8>;
+				interrupts = <0>;
+				marvell,#interrupts = <5>;
+			};
+
+			intc: main-interrupt-ctrl@20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x10>, <0x20210 0x10>;
+			};
+
+			timer: timer@20300 {
+				compatible = "marvell,orion-timer";
+				reg = <0x20300 0x20>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <1>, <2>;
+				clocks = <&core_clk 0>;
+			};
+
+			watchdog@20300 {
+				compatible = "marvell,orion-wdt";
+				reg = <0x20300 0x28>, <0x20108 0x4>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <3>;
+				clocks = <&core_clk 0>;
+			};
+
+			crypto: crypto-engine@30000 {
+				compatible = "marvell,orion-crypto";
+				reg = <0x30000 0x10000>,
+				      <0xffffe000 0x800>;
+				reg-names = "regs", "sram";
+				interrupts = <31>;
+				clocks = <&gate_clk 15>;
+				status = "okay";
+			};
+
+			ehci0: usb-host@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <24>;
+				clocks = <&gate_clk 0>;
+				status = "okay";
+			};
+
+			ehci1: usb-host@51000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x51000 0x1000>;
+				interrupts = <25>;
+				clocks = <&gate_clk 1>;
+				status = "okay";
+			};
+
+			xor0: dma-engine@60800 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60800 0x100
+				       0x60a00 0x100>;
+				clocks = <&gate_clk 23>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <39>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <40>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			xor1: dma-engine@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				clocks = <&gate_clk 24>;
+				status = "okay";
+
+				channel0 {
+					interrupts = <42>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+
+				channel1 {
+					interrupts = <43>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+			};
+
+			sdio1: sdio-host@90000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x90000 0x100>;
+				interrupts = <36>, <38>;
+				clocks = <&gate_clk 9>;
+				pinctrl-0 = <&pmx_sdio1>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			eth: ethernet-ctrl@72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				clocks = <&gate_clk 2>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethernet-port@0 {
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					interrupts = <29>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+					phy-handle = <&ethphy>;
+				};
+			};
+
+			mdio: mdio-bus@72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <30>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+
+				ethphy: ethernet-phy {
+					/* set phy address in board file */
+				};
+			};
+
+			sdio0: sdio-host@92000 {
+				compatible = "marvell,dove-sdhci";
+				reg = <0x92000 0x100>;
+				interrupts = <35>, <37>;
+				clocks = <&gate_clk 8>;
+				pinctrl-0 = <&pmx_sdio0>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			sata0: sata-host@a0000 {
+				compatible = "marvell,orion-sata";
+				reg = <0xa0000 0x2400>;
+				interrupts = <62>;
+				clocks = <&gate_clk 3>;
+				phys = <&sata_phy0>;
+				phy-names = "port0";
+				nr-ports = <1>;
+				status = "disabled";
+			};
+
+			sata_phy0: sata-phy@a2000 {
+				compatible = "marvell,mvebu-sata-phy";
+				reg = <0xa2000 0x0334>;
+				clocks = <&gate_clk 3>;
+				clock-names = "sata";
+				#phy-cells = <0>;
+				status = "ok";
+			};
+
+			audio0: audio-controller@b0000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb0000 0x2210>;
+				interrupts = <19>, <20>;
+				clocks = <&gate_clk 12>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			audio1: audio-controller@b4000 {
+				compatible = "marvell,dove-audio";
+				reg = <0xb4000 0x2210>;
+				interrupts = <21>, <22>;
+				clocks = <&gate_clk 13>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			thermal: thermal-diode@d001c {
+				compatible = "marvell,dove-thermal";
+				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
+			};
+
+			gate_clk: clock-gating-ctrl@d0038 {
+				compatible = "marvell,dove-gating-clock";
+				reg = <0xd0038 0x4>;
+				clocks = <&core_clk 0>;
+				#clock-cells = <1>;
+			};
+
+			pinctrl: pin-ctrl@d0200 {
+				compatible = "marvell,dove-pinctrl";
+				reg = <0xd0200 0x14>,
+				      <0xd0440 0x04>;
+				clocks = <&gate_clk 22>;
+
+				pmx_gpio_0: pmx-gpio-0 {
+					marvell,pins = "mpp0";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_1: pmx-gpio-1 {
+					marvell,pins = "mpp1";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_2: pmx-gpio-2 {
+					marvell,pins = "mpp2";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_3: pmx-gpio-3 {
+					marvell,pins = "mpp3";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_4: pmx-gpio-4 {
+					marvell,pins = "mpp4";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_5: pmx-gpio-5 {
+					marvell,pins = "mpp5";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_6: pmx-gpio-6 {
+					marvell,pins = "mpp6";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_7: pmx-gpio-7 {
+					marvell,pins = "mpp7";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_8: pmx-gpio-8 {
+					marvell,pins = "mpp8";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_9: pmx-gpio-9 {
+					marvell,pins = "mpp9";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_10: pmx-gpio-10 {
+					marvell,pins = "mpp10";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_11: pmx-gpio-11 {
+					marvell,pins = "mpp11";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_12: pmx-gpio-12 {
+					marvell,pins = "mpp12";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_13: pmx-gpio-13 {
+					marvell,pins = "mpp13";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_extclk: pmx-audio1-extclk {
+					marvell,pins = "mpp13";
+					marvell,function = "audio1";
+				};
+
+				pmx_gpio_14: pmx-gpio-14 {
+					marvell,pins = "mpp14";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_15: pmx-gpio-15 {
+					marvell,pins = "mpp15";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_16: pmx-gpio-16 {
+					marvell,pins = "mpp16";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_17: pmx-gpio-17 {
+					marvell,pins = "mpp17";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_18: pmx-gpio-18 {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_19: pmx-gpio-19 {
+					marvell,pins = "mpp19";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_20: pmx-gpio-20 {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+
+				pmx_gpio_21: pmx-gpio-21 {
+					marvell,pins = "mpp21";
+					marvell,function = "gpio";
+				};
+
+				pmx_camera: pmx-camera {
+					marvell,pins = "mpp_camera";
+					marvell,function = "camera";
+				};
+
+				pmx_camera_gpio: pmx-camera-gpio {
+					marvell,pins = "mpp_camera";
+					marvell,function = "gpio";
+				};
+
+				pmx_sdio0: pmx-sdio0 {
+					marvell,pins = "mpp_sdio0";
+					marvell,function = "sdio0";
+				};
+
+				pmx_sdio0_gpio: pmx-sdio0-gpio {
+					marvell,pins = "mpp_sdio0";
+					marvell,function = "gpio";
+				};
+
+				pmx_sdio1: pmx-sdio1 {
+					marvell,pins = "mpp_sdio1";
+					marvell,function = "sdio1";
+				};
+
+				pmx_sdio1_gpio: pmx-sdio1-gpio {
+					marvell,pins = "mpp_sdio1";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_gpio: pmx-audio1-gpio {
+					marvell,pins = "mpp_audio1";
+					marvell,function = "gpio";
+				};
+
+				pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
+					marvell,pins = "mpp_audio1";
+					marvell,function = "i2s1/spdifo";
+				};
+
+				pmx_spi0: pmx-spi0 {
+					marvell,pins = "mpp_spi0";
+					marvell,function = "spi0";
+				};
+
+				pmx_spi0_gpio: pmx-spi0-gpio {
+					marvell,pins = "mpp_spi0";
+					marvell,function = "gpio";
+				};
+
+				pmx_uart1: pmx-uart1 {
+					marvell,pins = "mpp_uart1";
+					marvell,function = "uart1";
+				};
+
+				pmx_uart1_gpio: pmx-uart1-gpio {
+					marvell,pins = "mpp_uart1";
+					marvell,function = "gpio";
+				};
+
+				pmx_nand: pmx-nand {
+					marvell,pins = "mpp_nand";
+					marvell,function = "nand";
+				};
+
+				pmx_nand_gpo: pmx-nand-gpo {
+					marvell,pins = "mpp_nand";
+					marvell,function = "gpo";
+				};
+			};
+
+			core_clk: core-clocks@d0214 {
+				compatible = "marvell,dove-core-clock";
+				reg = <0xd0214 0x4>;
+				#clock-cells = <1>;
+			};
+
+			gpio0: gpio-ctrl@d0400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xd0400 0x20>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <12>, <13>, <14>, <60>;
+			};
+
+			gpio1: gpio-ctrl@d0420 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xd0420 0x20>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <61>;
+			};
+
+			rtc: real-time-clock@d8500 {
+				compatible = "marvell,orion-rtc";
+				reg = <0xd8500 0x20>;
+			};
+
+			gconf: global-config@e802c {
+				compatible = "marvell,dove-global-config",
+				             "syscon";
+				reg = <0xe802c 0x14>;
+			};
+
+			gpio2: gpio-ctrl@e8400 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0xe8400 0x0c>;
+				ngpios = <8>;
+			};
+
+			lcd1: lcd-controller@810000 {
+				compatible = "marvell,dove-lcd";
+				reg = <0x810000 0x1000>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			lcd0: lcd-controller@820000 {
+				compatible = "marvell,dove-lcd";
+				reg = <0x820000 0x1000>;
+				interrupts = <47>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/dra7-evm.dts b/src/arm/dra7-evm.dts
new file mode 100644
index 000000000000..746cddb1b8f5
--- /dev/null
+++ b/src/arm/dra7-evm.dts
@@ -0,0 +1,694 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TI DRA742";
+	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x60000000>; /* 1536 MB */
+	};
+
+	mmc2_3v3: fixedregulator-mmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc2_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&dra7_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vtt_pin>;
+
+	vtt_pin: pinmux_vtt_pin {
+		pinctrl-single,pins = <
+			0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
+			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+			0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
+			0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
+			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
+			0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
+			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
+			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
+			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
+			0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
+			0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
+			0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
+			0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
+			0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
+			0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
+			0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
+			0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
+			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
+		>;
+	};
+
+	qspi1_pins: pinmux_qspi1_pins {
+		pinctrl-single,pins = <
+			0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
+			0x50 (PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
+			0x74 (PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
+			0x78 (PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
+			0x7c (PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
+			0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
+			0x84 (PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
+			0x88 (PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
+			0xb8 (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
+			0xbc (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+                pinctrl-single,pins = <
+			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+                >;
+        };
+
+	usb2_pins: pinmux_usb2_pins {
+                pinctrl-single,pins = <
+			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+                >;
+        };
+
+	nand_flash_x16: nand_flash_x16 {
+		/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
+		 * So NAND flash requires following switch settings:
+		 * SW5.9 (GPMC_WPN) = LOW
+		 * SW5.1 (NAND_BOOTn) = HIGH */
+		pinctrl-single,pins = <
+			0x0 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
+			0x4 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
+			0x8 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
+			0xc 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
+			0x10	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
+			0x14	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
+			0x18	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
+			0x1c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
+			0x20	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
+			0x24	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
+			0x28	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
+			0x2c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
+			0x30	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
+			0x34	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
+			0x38	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
+			0x3c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
+			0xd8	(PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
+			0xcc	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
+			0xb4	(PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
+			0xc4	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
+			0xc8	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
+			0xd0	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txc.rgmii0_txc */
+			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txctl.rgmii0_txctl */
+			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3.rgmii0_txd3 */
+			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd2.rgmii0_txd2 */
+			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd1.rgmii0_txd1 */
+			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd0.rgmii0_txd0 */
+			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxc.rgmii0_rxc */
+			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxctl.rgmii0_rxctl */
+			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd3.rgmii0_rxd3 */
+			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd2.rgmii0_rxd2 */
+			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd1.rgmii0_rxd1 */
+			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd0.rgmii0_rxd0 */
+
+			/* Slave 2 */
+			0x198 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
+			0x19c (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			0x1b0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
+			0x1b4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
+			0x1b8 (PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
+			0x1bc (PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
+			0x1c0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
+			0x1c4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+		>;
+
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x250 (MUX_MODE15)
+			0x254 (MUX_MODE15)
+			0x258 (MUX_MODE15)
+			0x25c (MUX_MODE15)
+			0x260 (MUX_MODE15)
+			0x264 (MUX_MODE15)
+			0x268 (MUX_MODE15)
+			0x26c (MUX_MODE15)
+			0x270 (MUX_MODE15)
+			0x274 (MUX_MODE15)
+			0x278 (MUX_MODE15)
+			0x27c (MUX_MODE15)
+
+			/* Slave 2 */
+			0x198 (MUX_MODE15)
+			0x19c (MUX_MODE15)
+			0x1a0 (MUX_MODE15)
+			0x1a4 (MUX_MODE15)
+			0x1a8 (MUX_MODE15)
+			0x1ac (MUX_MODE15)
+			0x1b0 (MUX_MODE15)
+			0x1b4 (MUX_MODE15)
+			0x1b8 (MUX_MODE15)
+			0x1bc (MUX_MODE15)
+			0x1c0 (MUX_MODE15)
+			0x1c4 (MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
+			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			0x23c (MUX_MODE15)
+			0x240 (MUX_MODE15)
+		>;
+	};
+
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
+			0x3d4   (MUX_MODE15)		/* dcan1_rx.off */
+			0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			0x3d0   (MUX_MODE15)	/* dcan1_tx.off */
+			0x3d4   (MUX_MODE15)	/* dcan1_rx.off */
+			0x418   (MUX_MODE15)	/* wakeup0.off */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* CORE_VDD */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1060000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_IVAHD */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDS1V8 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* LDO1_OUT --> SDIO  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_RTCIO */
+					/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHY */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "ti,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <400000>;
+};
+
+&mcspi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+};
+
+&mcspi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3e0>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&mmc2_3v3>;
+	bus-width = <8>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_pins>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_pins>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x16>;
+	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		reg = <0 0 4>;		/* device IO registers */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <80>;
+		gpmc,cs-wr-off-ns = <80>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <60>;
+		gpmc,adv-wr-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <50>;
+		gpmc,oe-on-ns = <4>;
+		gpmc,oe-off-ns = <40>;
+		gpmc,access-ns = <40>;
+		gpmc,wr-access-ns = <80>;
+		gpmc,rd-cycle-ns = <80>;
+		gpmc,wr-cycle-ns = <80>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000c0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001c0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001e0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x0f600000>;
+		};
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&gpio7 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <2>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <3>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};
+
+&dcan1 {
+	status = "ok";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+};
diff --git a/src/arm/dra7.dtsi b/src/arm/dra7.dtsi
new file mode 100644
index 000000000000..5827fedafd43
--- /dev/null
+++ b/src/arm/dra7.dtsi
@@ -0,0 +1,1431 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/dra.h>
+
+#include "skeleton.dtsi"
+
+#define MAX_SOURCES 400
+#define DIRECT_IRQ(irq) (MAX_SOURCES + irq)
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "ti,dra7xx";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+		serial9 = &uart10;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+		d_can0 = &dcan1;
+		d_can1 = &dcan2;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	gic: interrupt-controller@48211000 {
+		compatible = "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		arm,routable-irqs = <192>;
+		reg = <0x48211000 0x1000>,
+		      <0x48212000 0x1000>,
+		      <0x48214000 0x2000>,
+		      <0x48216000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap5-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the SOC interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,dra7-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2";
+		reg = <0x44000000 0x1000000>,
+		      <0x45000000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
+
+		prm: prm@4ae06000 {
+			compatible = "ti,dra7-prm";
+			reg = <0x4ae06000 0x3000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+			prm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prm_clockdomains: clockdomains {
+			};
+		};
+
+		axi@0 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0x51000000 0x51000000 0x3000
+				  0x0	     0x20000000 0x10000000>;
+			pcie@51000000 {
+				compatible = "ti,dra7-pcie";
+				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+				reg-names = "rc_dbics", "ti_conf", "config";
+				interrupts = <0 232 0x4>, <0 233 0x4>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				#interrupt-cells = <1>;
+				num-lanes = <1>;
+				ti,hwmods = "pcie1";
+				phys = <&pcie1_phy>;
+				phy-names = "pcie-phy0";
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 1>,
+						<0 0 0 2 &pcie1_intc 2>,
+						<0 0 0 3 &pcie1_intc 3>,
+						<0 0 0 4 &pcie1_intc 4>;
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#address-cells = <0>;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		axi@1 {
+			compatible = "simple-bus";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0x51800000 0x51800000 0x3000
+				  0x0	     0x30000000 0x10000000>;
+			status = "disabled";
+			pcie@51000000 {
+				compatible = "ti,dra7-pcie";
+				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
+				reg-names = "rc_dbics", "ti_conf", "config";
+				interrupts = <0 355 0x4>, <0 356 0x4>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				ranges = <0x81000000 0 0          0x03000 0 0x00010000
+					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				#interrupt-cells = <1>;
+				num-lanes = <1>;
+				ti,hwmods = "pcie2";
+				phys = <&pcie2_phy>;
+				phy-names = "pcie-phy0";
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 1>,
+						<0 0 0 2 &pcie2_intc 2>,
+						<0 0 0 3 &pcie2_intc 3>,
+						<0 0 0 4 &pcie2_intc 4>;
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#address-cells = <0>;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		cm_core_aon: cm_core_aon@4a005000 {
+			compatible = "ti,dra7-cm-core-aon";
+			reg = <0x4a005000 0x2000>;
+
+			cm_core_aon_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_core_aon_clockdomains: clockdomains {
+			};
+		};
+
+		cm_core: cm_core@4a008000 {
+			compatible = "ti,dra7-cm-core";
+			reg = <0x4a008000 0x3000>;
+
+			cm_core_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_core_clockdomains: clockdomains {
+			};
+		};
+
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		dra7_ctrl_core: ctrl_core@4a002000 {
+			compatible = "syscon";
+			reg = <0x4a002000 0x6d0>;
+		};
+
+		dra7_ctrl_general: tisyscon@4a002e00 {
+			compatible = "syscon";
+			reg = <0x4a002e00 0x7c>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0 0x4>;
+			syscon = <&dra7_ctrl_general>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
+		dra7_pmx_core: pinmux@4a003400 {
+			compatible = "ti,dra7-padconf", "pinctrl-single";
+			reg = <0x4a003400 0x0464>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x3fffffff>;
+		};
+
+		sdma: dma-controller@4a056000 {
+			compatible = "ti,omap4430-sdma";
+			reg = <0x4a056000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <127>;
+		};
+
+		gpio1: gpio@4ae10000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4ae10000 0x200>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio1";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio7: gpio@48051000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48051000 0x200>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio7";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio8: gpio@48053000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48053000 0x200>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio8";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+			status = "disabled";
+			dmas = <&sdma 49>, <&sdma 50>;
+			dma-names = "tx", "rx";
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+			status = "disabled";
+			dmas = <&sdma 51>, <&sdma 52>;
+			dma-names = "tx", "rx";
+		};
+
+		uart3: serial@48020000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+			status = "disabled";
+			dmas = <&sdma 53>, <&sdma 54>;
+			dma-names = "tx", "rx";
+		};
+
+		uart4: serial@4806e000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+                        status = "disabled";
+			dmas = <&sdma 55>, <&sdma 56>;
+			dma-names = "tx", "rx";
+		};
+
+		uart5: serial@48066000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48066000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+			status = "disabled";
+			dmas = <&sdma 63>, <&sdma 64>;
+			dma-names = "tx", "rx";
+		};
+
+		uart6: serial@48068000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48068000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+			status = "disabled";
+			dmas = <&sdma 79>, <&sdma 80>;
+			dma-names = "tx", "rx";
+		};
+
+		uart7: serial@48420000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48420000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart7";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart8: serial@48422000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48422000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart8";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart9: serial@48424000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48424000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart9";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		uart10: serial@4ae2b000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4ae2b000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart10";
+			clock-frequency = <48000000>;
+			status = "disabled";
+		};
+
+		mailbox1: mailbox@4a0f4000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4a0f4000 0x200>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox1";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <3>;
+			ti,mbox-num-fifos = <8>;
+			status = "disabled";
+		};
+
+		mailbox2: mailbox@4883a000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4883a000 0x200>;
+			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox2";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox3: mailbox@4883c000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4883c000 0x200>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox3";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox4: mailbox@4883e000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4883e000 0x200>;
+			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox4";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox5: mailbox@48840000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48840000 0x200>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox5";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox6: mailbox@48842000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48842000 0x200>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox6";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox7: mailbox@48844000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48844000 0x200>;
+			interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox7";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox8: mailbox@48846000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48846000 0x200>;
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox8";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox9: mailbox@4885e000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4885e000 0x200>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox9";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox10: mailbox@48860000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48860000 0x200>;
+			interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox10";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox11: mailbox@48862000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48862000 0x200>;
+			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox11";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox12: mailbox@48864000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48864000 0x200>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox12";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		mailbox13: mailbox@48802000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x48802000 0x200>;
+			interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox13";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <12>;
+			status = "disabled";
+		};
+
+		timer1: timer@4ae18000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4ae18000 0x80>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@48820000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48820000 0x80>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@48822000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48822000 0x80>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer7: timer@48824000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48824000 0x80>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@48826000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48826000 0x80>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer13: timer@48828000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48828000 0x80>;
+			interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer13";
+			status = "disabled";
+		};
+
+		timer14: timer@4882a000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882a000 0x80>;
+			interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer14";
+			status = "disabled";
+		};
+
+		timer15: timer@4882c000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882c000 0x80>;
+			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer15";
+			status = "disabled";
+		};
+
+		timer16: timer@4882e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4882e000 0x80>;
+			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer16";
+			status = "disabled";
+		};
+
+		wdt2: wdt@4ae14000 {
+			compatible = "ti,omap3-wdt";
+			reg = <0x4ae14000 0x80>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
+		dmm@4e000000 {
+			compatible = "ti,omap5-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "dmm";
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+			status = "disabled";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+			status = "disabled";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+			status = "disabled";
+		};
+
+		i2c4: i2c@4807a000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807a000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c4";
+			status = "disabled";
+		};
+
+		i2c5: i2c@4807c000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807c000 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c5";
+			status = "disabled";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+			pbias-supply = <&pbias_mmc_reg>;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+			dmas = <&sdma 57>, <&sdma 58>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
+			      <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+			      <0x4ae0c158 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x80>;
+			/* LDOVBBMPU_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMPU_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1060000		0	0x0	0 0x02000000 0x01F00000
+			1160000		0	0x4	0 0x02000000 0x01F00000
+			1210000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_ivahd: regulator-abb-ivahd {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_ivahd";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
+			      <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+			      <0x4a002470 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x40000000>;
+			/* LDOVBBIVA_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBIVA_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1055000		0	0x0	0 0x02000000 0x01F00000
+			1150000		0	0x4	0 0x02000000 0x01F00000
+			1250000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_dspeve: regulator-abb-dspeve {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_dspeve";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
+			      <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+			      <0x4a00246c 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x20000000>;
+			/* LDOVBBDSPEVE_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBDSPEVE_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1055000		0	0x0	0 0x02000000 0x01F00000
+			1150000		0	0x4	0 0x02000000 0x01F00000
+			1250000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_gpu: regulator-abb-gpu {
+			compatible = "ti,abb-v3";
+			regulator-name = "abb_gpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin1>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
+			      <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+			      <0x4ae0c154 0x4>;
+			reg-names = "setup-address", "control-address",
+				    "int-address", "efuse-address",
+				    "ldo-address";
+			ti,tranxdone-status-mask = <0x10000000>;
+			/* LDOVBBGPU_FBB_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBGPU_FBB_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1090000		0	0x0	0 0x02000000 0x01F00000
+			1210000		0	0x4	0 0x02000000 0x01F00000
+			1280000		0	0x8	0 0x02000000 0x01F00000
+			>;
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48098000 0x200>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+			status = "disabled";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x4809a000 0x200>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+			status = "disabled";
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480b8000 0x200>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>, <&sdma 16>;
+			dma-names = "tx0", "rx0";
+			status = "disabled";
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480ba000 0x200>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
+			status = "disabled";
+		};
+
+		qspi: qspi@4b300000 {
+			compatible = "ti,dra7xxx-qspi";
+			reg = <0x4b300000 0x100>;
+			reg-names = "qspi_base";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "qspi";
+			clocks = <&qspi_gfclk_div>;
+			clock-names = "fck";
+			num-cs = <4>;
+			interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		omap_control_sata: control-phy@4a002374 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002374 0x4>;
+			reg-names = "power";
+			clocks = <&sys_clkin1>;
+			clock-names = "sysclk";
+		};
+
+		/* OCP2SCP3 */
+		ocp2scp@4a090000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x4a090000 0x20>;
+			ti,hwmods = "ocp2scp3";
+			sata_phy: phy@4A096000 {
+				compatible = "ti,phy-pipe3-sata";
+				reg = <0x4A096000 0x80>, /* phy_rx */
+				      <0x4A096400 0x64>, /* phy_tx */
+				      <0x4A096800 0x40>; /* pll_ctrl */
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_sata>;
+				clocks = <&sys_clkin1>;
+				clock-names = "sysclk";
+				#phy-cells = <0>;
+			};
+
+			pcie1_phy: pciephy@4a094000 {
+				compatible = "ti,phy-pipe3-pcie";
+				reg = <0x4a094000 0x80>, /* phy_rx */
+				      <0x4a094400 0x64>; /* phy_tx */
+				reg-names = "phy_rx", "phy_tx";
+				ctrl-module = <&omap_control_pcie1phy>;
+				clocks = <&dpll_pcie_ref_ck>,
+					 <&dpll_pcie_ref_m2ldo_ck>,
+					 <&optfclk_pciephy1_32khz>,
+					 <&optfclk_pciephy1_clk>,
+					 <&optfclk_pciephy1_div_clk>,
+					 <&optfclk_pciephy_div>;
+				clock-names = "dpll_ref", "dpll_ref_m2",
+					      "wkupclk", "refclk",
+					      "div-clk", "phy-div";
+				#phy-cells = <0>;
+				ti,hwmods = "pcie1-phy";
+			};
+
+			pcie2_phy: pciephy@4a095000 {
+				compatible = "ti,phy-pipe3-pcie";
+				reg = <0x4a095000 0x80>, /* phy_rx */
+				      <0x4a095400 0x64>; /* phy_tx */
+				reg-names = "phy_rx", "phy_tx";
+				ctrl-module = <&omap_control_pcie2phy>;
+				clocks = <&dpll_pcie_ref_ck>,
+					 <&dpll_pcie_ref_m2ldo_ck>,
+					 <&optfclk_pciephy2_32khz>,
+					 <&optfclk_pciephy2_clk>,
+					 <&optfclk_pciephy2_div_clk>,
+					 <&optfclk_pciephy_div>;
+				clock-names = "dpll_ref", "dpll_ref_m2",
+					      "wkupclk", "refclk",
+					      "div-clk", "phy-div";
+				#phy-cells = <0>;
+				ti,hwmods = "pcie2-phy";
+				status = "disabled";
+			};
+		};
+
+		sata: sata@4a141100 {
+			compatible = "snps,dwc-ahci";
+			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			clocks = <&sata_ref_clk>;
+			ti,hwmods = "sata";
+		};
+
+		omap_control_pcie1phy: control-phy@0x4a003c40 {
+			compatible = "ti,control-phy-pcie";
+			reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
+			reg-names = "power", "control_sma", "pcie_pcs";
+			clocks = <&sys_clkin1>;
+			clock-names = "sysclk";
+		};
+
+		omap_control_pcie2phy: control-pcie@0x4a003c44 {
+			compatible = "ti,control-phy-pcie";
+			reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
+			reg-names = "power", "control_sma", "pcie_pcs";
+			clocks = <&sys_clkin1>;
+			clock-names = "sysclk";
+			status = "disabled";
+		};
+
+		rtc@48838000 {
+			compatible = "ti,am3352-rtc";
+			reg = <0x48838000 0x100>;
+			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "rtcss";
+			clocks = <&sys_32k_ck>;
+		};
+
+		omap_control_usb2phy1: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usb3phy1: control-phy@4a002370 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002370 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usb2phy2: control-phy@0x4a002e74 {
+			compatible = "ti,control-phy-usb2-dra7";
+			reg = <0x4a002e74 0x4>;
+			reg-names = "power";
+		};
+
+		/* OCP2SCP1 */
+		ocp2scp@4a080000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <0x4a080000 0x20>;
+			ti,hwmods = "ocp2scp1";
+
+			usb2_phy1: phy@4a084000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a084000 0x400>;
+				ctrl-module = <&omap_control_usb2phy1>;
+				clocks = <&usb_phy1_always_on_clk32k>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names =	"wkupclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+
+			usb2_phy2: phy@4a085000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a085000 0x400>;
+				ctrl-module = <&omap_control_usb2phy2>;
+				clocks = <&usb_phy2_always_on_clk32k>,
+					 <&usb_otg_ss2_refclk960m>;
+				clock-names =	"wkupclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+
+			usb3_phy1: phy@4a084400 {
+				compatible = "ti,omap-usb3";
+				reg = <0x4a084400 0x80>,
+				      <0x4a084800 0x64>,
+				      <0x4a084c00 0x40>;
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_usb3phy1>;
+				clocks = <&usb_phy3_always_on_clk32k>,
+					 <&sys_clkin1>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names =	"wkupclk",
+						"sysclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		omap_dwc3_1: omap_dwc3_1@48880000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss1";
+			reg = <0x48880000 0x10000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			usb1: usb@48890000 {
+				compatible = "snps,dwc3";
+				reg = <0x48890000 0x17000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy1>, <&usb3_phy1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				maximum-speed = "super-speed";
+				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		omap_dwc3_2: omap_dwc3_2@488c0000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss2";
+			reg = <0x488c0000 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			usb2: usb@488d0000 {
+				compatible = "snps,dwc3";
+				reg = <0x488d0000 0x17000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy2>;
+				phy-names = "usb2-phy";
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
+		omap_dwc3_3: omap_dwc3_3@48900000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss3";
+			reg = <0x48900000 0x10000>;
+			interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			status = "disabled";
+			usb3: usb@48910000 {
+				compatible = "snps,dwc3";
+				reg = <0x48910000 0x17000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		elm: elm@48078000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48078000 0xfc0>;      /* device IO registers */
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "elm";
+			status = "disabled";
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x50000000 0x37c>;      /* device IO registers */
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		atl: atl@4843c000 {
+			compatible = "ti,dra7-atl";
+			reg = <0x4843c000 0x3ff>;
+			ti,hwmods = "atl";
+			ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+					     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
+			clocks = <&atl_gfclk_mux>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		crossbar_mpu: crossbar@4a020000 {
+			compatible = "ti,irq-crossbar";
+			reg = <0x4a002a48 0x130>;
+			ti,max-irqs = <160>;
+			ti,max-crossbar-sources = <MAX_SOURCES>;
+			ti,reg-size = <2>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
+			ti,irqs-skip = <10 133 139 140>;
+			ti,irqs-safe-map = <0>;
+		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "gmac";
+			clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
+			clock-names = "fck", "cpts";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			reg = <0x48484000 0x1000
+			       0x48485200 0x2E00>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * rx_thresh_pend
+			 * rx_pend
+			 * tx_pend
+			 * misc_pend
+			 */
+			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+			ranges;
+			status = "disabled";
+
+			davinci_mdio: mdio@48485000 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x48485000 0x100>;
+			};
+
+			cpsw_emac0: slave@48480200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@48480300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			phy_sel: cpsw-phy-sel@4a002554 {
+				compatible = "ti,dra7xx-cpsw-phy-sel";
+				reg= <0x4a002554 0x4>;
+				reg-names = "gmii-sel";
+			};
+		};
+
+		dcan1: can@481cc000 {
+			compatible = "ti,dra7-d_can";
+			ti,hwmods = "dcan1";
+			reg = <0x4ae3c000 0x2000>;
+			syscon-raminit = <&dra7_ctrl_core 0x558 0>;
+			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&dcan1_sys_clk_mux>;
+			status = "disabled";
+		};
+
+		dcan2: can@481d0000 {
+			compatible = "ti,dra7-d_can";
+			ti,hwmods = "dcan2";
+			reg = <0x48480000 0x2000>;
+			syscon-raminit = <&dra7_ctrl_core 0x558 1>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sys_clkin1>;
+			status = "disabled";
+		};
+	};
+};
+
+/include/ "dra7xx-clocks.dtsi"
diff --git a/src/arm/dra72-evm.dts b/src/arm/dra72-evm.dts
new file mode 100644
index 000000000000..4d8711713610
--- /dev/null
+++ b/src/arm/dra72-evm.dts
@@ -0,0 +1,571 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TI DRA722";
+	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1024 MB */
+	};
+
+	evm_3v3: fixedregulator-evm_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&dra7_pmx_core {
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+		>;
+	};
+
+	nand_default: nand_default {
+		pinctrl-single,pins = <
+			0x0	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
+			0x4	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
+			0x8	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
+			0xc	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
+			0x10	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
+			0x14	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
+			0x18	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
+			0x1c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
+			0x20	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
+			0x24	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
+			0x28	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
+			0x2c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
+			0x30	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
+			0x34	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
+			0x38	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
+			0x3c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
+			0xb4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
+			0xc4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
+			0xcc	(PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
+			0xc8	(PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
+			0xd0	(PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
+			0xd8	(PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+		>;
+	};
+
+	usb2_pins: pinmux_usb2_pins {
+		pinctrl-single,pins = <
+			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+		>;
+	};
+
+	tps65917_pins_default: tps65917_pins_default {
+		pinctrl-single,pins = <
+			0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+		>;
+	};
+
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			0x36c (PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
+			0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
+			0x3d4   (MUX_MODE15)		/* dcan1_rx.off */
+			0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			0x3d0   (MUX_MODE15)	/* dcan1_tx.off */
+			0x3d4   (MUX_MODE15)	/* dcan1_rx.off */
+			0x418   (MUX_MODE15)	/* wakeup0.off */
+		>;
+	};
+
+	qspi1_pins: pinmux_qspi1_pins {
+		pinctrl-single,pins = <
+			0x74 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
+			0x78 (PIN_INPUT | MUX_MODE1)	/* gpmc_a14.qspi1_d3 */
+			0x7c (PIN_INPUT | MUX_MODE1)	/* gpmc_a15.qspi1_d2 */
+			0x80 (PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d1 */
+			0x84 (PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d0 */
+			0x88 (PIN_OUTPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
+			0xb8 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	tps65917: tps65917@58 {
+		compatible = "ti,tps65917";
+		reg = <0x58>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps65917_pins_default>;
+
+		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		ti,system-power-controller;
+
+		tps65917_pmic {
+			compatible = "ti,tps65917-pmic";
+
+			regulators {
+				smps1_reg: smps1 {
+					/* VDD_MPU */
+					regulator-name = "smps1";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps2_reg: smps2 {
+					/* VDD_CORE */
+					regulator-name = "smps2";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1060000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_GPU IVA DSPEVE */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				smps4_reg: smps4 {
+					/* VDDS1V8 */
+					regulator-name = "smps4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps5_reg: smps5 {
+					/* VDD_DDR */
+					regulator-name = "smps5";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* LDO1_OUT --> SDIO  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* LDO2_OUT --> TP1017 (UNUSED)  */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHY */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		tps65917_power_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps65917>;
+			interrupts = <1 IRQ_TYPE_NONE>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <6>;
+		};
+	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "ti,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_default>;
+	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		/* To use NAND, DIP switch SW5 must be set like so:
+		 * SW5.1 (NAND_SELn) = ON (LOW)
+		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
+		 */
+		reg = <0 0 4>;		/* device IO registers */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <80>;
+		gpmc,cs-wr-off-ns = <80>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <60>;
+		gpmc,adv-wr-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <50>;
+		gpmc,oe-on-ns = <4>;
+		gpmc,oe-off-ns = <40>;
+		gpmc,access-ns = <40>;
+		gpmc,wr-access-ns = <80>;
+		gpmc,rd-cycle-ns = <80>;
+		gpmc,wr-cycle-ns = <80>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x000020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000c0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001c0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001e0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x0f600000>;
+		};
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_pins>;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is a viable alternative
+	 */
+	cd-gpios = <&gpio6 27 0>;
+};
+
+&mmc2 {
+	/* SW5-3 in ON position */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&evm_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&dra7_pmx_core {
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 2 */
+			0x198 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
+			0x19c (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			0x1b0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
+			0x1b4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
+			0x1b8 (PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
+			0x1bc (PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
+			0x1c0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
+			0x1c4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+		>;
+
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 2 */
+			0x198 (MUX_MODE15)
+			0x19c (MUX_MODE15)
+			0x1a0 (MUX_MODE15)
+			0x1a4 (MUX_MODE15)
+			0x1a8 (MUX_MODE15)
+			0x1ac (MUX_MODE15)
+			0x1b0 (MUX_MODE15)
+			0x1b4 (MUX_MODE15)
+			0x1b8 (MUX_MODE15)
+			0x1bc (MUX_MODE15)
+			0x1c0 (MUX_MODE15)
+			0x1c4 (MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
+			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			0x23c (MUX_MODE15)
+			0x240 (MUX_MODE15)
+		>;
+	};
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <3>;
+	phy-mode = "rgmii";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	active_slave = <1>;
+};
+
+&dcan1 {
+	status = "ok";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_pins>;
+
+	spi-max-frequency = <48000000>;
+	m25p80@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		spi-cpol;
+		spi-cpha;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x000010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
diff --git a/src/arm/dra72x.dtsi b/src/arm/dra72x.dtsi
new file mode 100644
index 000000000000..e5a3d23a3df1
--- /dev/null
+++ b/src/arm/dra72x.dtsi
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/src/arm/dra74x.dtsi b/src/arm/dra74x.dtsi
new file mode 100644
index 000000000000..10173fab1a15
--- /dev/null
+++ b/src/arm/dra74x.dtsi
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include "dra7.dtsi"
+
+/ {
+	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000	1060000
+				1176000	1160000
+				>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ocp {
+		omap_dwc3_4: omap_dwc3_4@48940000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss4";
+			reg = <0x48940000 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			status = "disabled";
+			usb4: usb@48950000 {
+				compatible = "snps,dwc3";
+				reg = <0x48950000 0x17000>;
+				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+				tx-fifo-resize;
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+			};
+		};
+	};
+};
diff --git a/src/arm/dra7xx-clocks.dtsi b/src/arm/dra7xx-clocks.dtsi
new file mode 100644
index 000000000000..4bdcbd61ce47
--- /dev/null
+++ b/src/arm/dra7xx-clocks.dtsi
@@ -0,0 +1,2058 @@
+/*
+ * Device Tree Source for DRA7xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_core_aon_clocks {
+	atl_clkin0_ck: atl_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
+	};
+
+	atl_clkin1_ck: atl_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
+	};
+
+	atl_clkin2_ck: atl_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
+	};
+
+	atl_clkin3_ck: atl_clkin3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-atl-clock";
+		clocks = <&atl_gfclk_mux>;
+	};
+
+	hdmi_clkin_ck: hdmi_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlb_clkin_ck: mlb_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	mlbp_clkin_ck: mlbp_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	ref_clkin0_ck: ref_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin1_ck: ref_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin2_ck: ref_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ref_clkin3_ck: ref_clkin3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	rmii_clk_ck: rmii_clk_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	sdvenc_clkin_ck: sdvenc_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_20000000_ck: virt_20000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	sys_clkin2: sys_clkin2 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <22579200>;
+	};
+
+	usb_otg_clkin_ck: usb_otg_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_clkin_ck: video1_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video1_m2_clkin_ck: video1_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_clkin_ck: video2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	video2_m2_clkin_ck: video2_m2_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap5-mpu-dpll-clock";
+		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mpu_dclk_div: mpu_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_dsp_ck: dpll_dsp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
+	};
+
+	dpll_dsp_m2_ck: dpll_dsp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0244>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_m2_ck: dpll_iva_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_dclk: iva_dclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_iva_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_gpu_ck: dpll_gpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
+	};
+
+	dpll_gpu_m2_ck: dpll_gpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02e8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0220>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_ck: dpll_gmac_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
+	};
+
+	dpll_gmac_m2_ck: dpll_gmac_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	video2_dclk_div: video2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_dclk_div: video1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_m2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_dclk_div: hdmi_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_eve_ck: dpll_eve_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
+	};
+
+	dpll_eve_m2_ck: dpll_eve_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_eve_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0294>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	eve_dclk_div: eve_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_eve_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0228>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_dsp_ck>;
+	};
+
+	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0248>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_gmac_ck>;
+	};
+
+	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02c8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x02bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	gmii_m_clk_div: gmii_m_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_gmac_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hdmi_clk2_div: hdmi_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdmi_div_clk: hdmi_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&hdmi_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_iclk_div: l3_iclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <4>;
+		reg = <0x0100>;
+		clocks = <&dpll_core_h12x2_ck>;
+		ti,index-power-of-two;
+	};
+
+	l4_root_clk_div: l4_root_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	video1_clk2_div: video1_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video1_div_clk: video1_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video1_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_clk2_div: video2_clk2_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	video2_div_clk: video2_div_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&video2_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ipu1_gfclk_mux: ipu1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0520>;
+	};
+
+	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x0550>;
+	};
+
+	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x0550>;
+	};
+
+	timer5_gfclk_mux: timer5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	timer6_gfclk_mux: timer6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0560>;
+	};
+
+	timer7_gfclk_mux: timer7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer8_gfclk_mux: timer8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	uart6_gfclk_mux: uart6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm_clocks {
+	sys_clkin1: sys_clkin1 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0118>;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x0114>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x011c>;
+		ti,dividers = <8>, <16>;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		reg = <0x0178>;
+		ti,max-div = <2>;
+	};
+
+	abe_giclk_div: abe_giclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		reg = <0x0174>;
+		ti,max-div = <2>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		reg = <0x01d8>;
+		ti,dividers = <16>, <32>;
+	};
+
+	abe_sys_clk_div: abe_sys_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0120>;
+		ti,max-div = <2>;
+	};
+
+	adc_gfclk_mux: adc_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
+		reg = <0x01dc>;
+	};
+
+	sys_clk1_dclk_div: sys_clk1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c8>;
+		ti,index-power-of-two;
+	};
+
+	sys_clk2_dclk_div: sys_clk2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin2>;
+		ti,max-div = <64>;
+		reg = <0x01cc>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_dclk_div: per_abe_x1_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01bc>;
+		ti,index-power-of-two;
+	};
+
+	dsp_gclk_div: dsp_gclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_dsp_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x018c>;
+		ti,index-power-of-two;
+	};
+
+	gpu_dclk: gpu_dclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gpu_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01a0>;
+		ti,index-power-of-two;
+	};
+
+	emif_phy_dclk_div: emif_phy_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0190>;
+		ti,index-power-of-two;
+	};
+
+	gmac_250m_dclk_div: gmac_250m_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	l3init_480m_dclk_div: l3init_480m_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01ac>;
+		ti,index-power-of-two;
+	};
+
+	usb_otg_dclk_div: usb_otg_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&usb_otg_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0184>;
+		ti,index-power-of-two;
+	};
+
+	sata_dclk_div: sata_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x01c0>;
+		ti,index-power-of-two;
+	};
+
+	pcie2_dclk_div: pcie2_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b8>;
+		ti,index-power-of-two;
+	};
+
+	pcie_dclk_div: pcie_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x01b4>;
+		ti,index-power-of-two;
+	};
+
+	emu_dclk_div: emu_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		ti,max-div = <64>;
+		reg = <0x0194>;
+		ti,index-power-of-two;
+	};
+
+	secure_32k_dclk_div: secure_32k_dclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&secure_32k_clk_src_ck>;
+		ti,max-div = <64>;
+		reg = <0x01c4>;
+		ti,index-power-of-two;
+	};
+
+	clkoutmux0_clk_mux: clkoutmux0_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0158>;
+	};
+
+	clkoutmux1_clk_mux: clkoutmux1_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x015c>;
+	};
+
+	clkoutmux2_clk_mux: clkoutmux2_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
+		reg = <0x0160>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	eve_clk: eve_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
+		reg = <0x0180>;
+	};
+
+	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0164>;
+	};
+
+	mlb_clk: mlb_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlb_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0134>;
+		ti,index-power-of-two;
+	};
+
+	mlbp_clk: mlbp_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mlbp_clkin_ck>;
+		ti,max-div = <64>;
+		reg = <0x0130>;
+		ti,index-power-of-two;
+	};
+
+	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		ti,max-div = <64>;
+		reg = <0x0138>;
+		ti,index-power-of-two;
+	};
+
+	timer_sys_clk_div: timer_sys_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin1>;
+		reg = <0x0144>;
+		ti,max-div = <2>;
+	};
+
+	video1_dpll_clk_mux: video1_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x0168>;
+	};
+
+	video2_dpll_clk_mux: video2_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		reg = <0x016c>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1838>;
+	};
+
+	dcan1_sys_clk_mux: dcan1_sys_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin2>;
+		ti,bit-shift = <24>;
+		reg = <0x1888>;
+	};
+
+	timer1_gfclk_mux: timer1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	uart10_gfclk_mux: uart10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1880>;
+	};
+};
+&cm_core_clocks {
+	dpll_pcie_ref_ck: dpll_pcie_ref_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&sys_clkin1>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c 0x4>;
+		ti,bit-shift = <7>;
+	};
+
+	apll_pcie_ck: apll_pcie_ck {
+		#clock-cells = <0>;
+		compatible = "ti,dra7-apll-clock";
+		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
+		reg = <0x021c>, <0x0220>;
+	};
+
+	optfclk_pciephy1_32khz: optfclk_pciephy1_32khz@4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <8>;
+	};
+
+	optfclk_pciephy2_32khz: optfclk_pciephy2_32khz@4a0093b8 {
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		#clock-cells = <0>;
+		reg = <0x13b8>;
+		ti,bit-shift = <8>;
+	};
+
+	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
+		compatible = "ti,divider-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x021c>;
+		ti,dividers = <2>, <1>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+	};
+
+	optfclk_pciephy1_clk: optfclk_pciephy1_clk@4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <9>;
+	};
+
+	optfclk_pciephy2_clk: optfclk_pciephy2_clk@4a0093b8 {
+		compatible = "ti,gate-clock";
+		clocks = <&apll_pcie_ck>;
+		#clock-cells = <0>;
+		reg = <0x13b8>;
+		ti,bit-shift = <9>;
+	};
+
+	optfclk_pciephy1_div_clk: optfclk_pciephy1_div_clk@4a0093b0 {
+		compatible = "ti,gate-clock";
+		clocks = <&optfclk_pciephy_div>;
+		#clock-cells = <0>;
+		reg = <0x13b0>;
+		ti,bit-shift = <10>;
+	};
+
+	optfclk_pciephy2_div_clk: optfclk_pciephy2_div_clk@4a0093b8 {
+		compatible = "ti,gate-clock";
+		clocks = <&optfclk_pciephy_div>;
+		#clock-cells = <0>;
+		reg = <0x13b8>;
+		ti,bit-shift = <10>;
+	};
+
+	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	apll_pcie_m2_ck: apll_pcie_m2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll_pcie_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_pcie_ref_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h13x2_ck: dpll_per_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	l3init_960m_gfclk: l3init_960m_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x06c0>;
+	};
+
+	dss_32khz_clk: dss_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1120>;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1120>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_h12x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1120>;
+	};
+
+	dss_hdmi_clk: dss_hdmi_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&hdmi_dpll_clk_mux>;
+		ti,bit-shift = <10>;
+		reg = <0x1120>;
+	};
+
+	dss_video1_clk: dss_video1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&video1_dpll_clk_mux>;
+		ti,bit-shift = <12>;
+		reg = <0x1120>;
+	};
+
+	dss_video2_clk: dss_video2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&video2_dpll_clk_mux>;
+		ti,bit-shift = <13>;
+		reg = <0x1120>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1760>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1768>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1770>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1778>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1780>;
+	};
+
+	gpio7_dbclk: gpio7_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1810>;
+	};
+
+	gpio8_dbclk: gpio8_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1818>;
+	};
+
+	mmc1_clk32k: mmc1_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1328>;
+	};
+
+	mmc2_clk32k: mmc2_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1330>;
+	};
+
+	mmc3_clk32k: mmc3_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1820>;
+	};
+
+	mmc4_clk32k: mmc4_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1828>;
+	};
+
+	sata_ref_clk: sata_ref_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin1>;
+		ti,bit-shift = <8>;
+		reg = <0x1388>;
+	};
+
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_960m_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x13f0>;
+	};
+
+	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_960m_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1340>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0688>;
+	};
+
+	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0698>;
+	};
+
+	atl_dpll_clk_mux: atl_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0c00>;
+	};
+
+	atl_gfclk_mux: atl_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>;
+		ti,bit-shift = <26>;
+		reg = <0x0c00>;
+	};
+
+	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_m2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x13d0>;
+		ti,dividers = <2>;
+	};
+
+	gmac_rft_clk_mux: gmac_rft_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>;
+		ti,bit-shift = <25>;
+		reg = <0x13d0>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1220>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x1220>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		ti,bit-shift = <24>;
+		reg = <0x0e50>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <28>;
+		reg = <0x1860>;
+	};
+
+	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1860>;
+	};
+
+	mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1860>;
+	};
+
+	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1868>;
+	};
+
+	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1868>;
+	};
+
+	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1898>;
+	};
+
+	mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1898>;
+	};
+
+	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1878>;
+	};
+
+	mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1878>;
+	};
+
+	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1904>;
+	};
+
+	mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1904>;
+	};
+
+	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1908>;
+	};
+
+	mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <22>;
+		reg = <0x1908>;
+	};
+
+	mcasp8_ahclk_mux: mcasp8_ahclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		ti,bit-shift = <22>;
+		reg = <0x1890>;
+	};
+
+	mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
+		ti,bit-shift = <24>;
+		reg = <0x1890>;
+	};
+
+	mmc1_fclk_mux: mmc1_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1328>;
+	};
+
+	mmc1_fclk_div: mmc1_fclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc1_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1328>;
+		ti,index-power-of-two;
+	};
+
+	mmc2_fclk_mux: mmc2_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1330>;
+	};
+
+	mmc2_fclk_div: mmc2_fclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc2_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1330>;
+		ti,index-power-of-two;
+	};
+
+	mmc3_gfclk_mux: mmc3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1820>;
+	};
+
+	mmc3_gfclk_div: mmc3_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc3_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1820>;
+		ti,index-power-of-two;
+	};
+
+	mmc4_gfclk_mux: mmc4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1828>;
+	};
+
+	mmc4_gfclk_div: mmc4_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc4_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1828>;
+		ti,index-power-of-two;
+	};
+
+	qspi_gfclk_mux: qspi_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1838>;
+	};
+
+	qspi_gfclk_div: qspi_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&qspi_gfclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <4>;
+		reg = <0x1838>;
+		ti,index-power-of-two;
+	};
+
+	timer10_gfclk_mux: timer10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1728>;
+	};
+
+	timer11_gfclk_mux: timer11_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1730>;
+	};
+
+	timer13_gfclk_mux: timer13_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17c8>;
+	};
+
+	timer14_gfclk_mux: timer14_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17d0>;
+	};
+
+	timer15_gfclk_mux: timer15_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x17d8>;
+	};
+
+	timer16_gfclk_mux: timer16_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1830>;
+	};
+
+	timer2_gfclk_mux: timer2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1738>;
+	};
+
+	timer3_gfclk_mux: timer3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1740>;
+	};
+
+	timer4_gfclk_mux: timer4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1748>;
+	};
+
+	timer9_gfclk_mux: timer9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x1750>;
+	};
+
+	uart1_gfclk_mux: uart1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	uart2_gfclk_mux: uart2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1848>;
+	};
+
+	uart3_gfclk_mux: uart3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1850>;
+	};
+
+	uart4_gfclk_mux: uart4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1858>;
+	};
+
+	uart5_gfclk_mux: uart5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1870>;
+	};
+
+	uart7_gfclk_mux: uart7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18d0>;
+	};
+
+	uart8_gfclk_mux: uart8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18e0>;
+	};
+
+	uart9_gfclk_mux: uart9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x18e8>;
+	};
+
+	vip1_gclk_mux: vip1_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1020>;
+	};
+
+	vip2_gclk_mux: vip2_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1028>;
+	};
+
+	vip3_gclk_mux: vip3_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1030>;
+	};
+};
+
+&cm_core_clockdomains {
+	coreaon_clkdm: coreaon_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
diff --git a/src/arm/ea3250.dts b/src/arm/ea3250.dts
new file mode 100644
index 000000000000..a4ba31b23c88
--- /dev/null
+++ b/src/arm/ea3250.dts
@@ -0,0 +1,281 @@
+/*
+ * Embedded Artists LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "lpc32xx.dtsi"
+
+/ {
+	model = "Embedded Artists LPC3250 board based on NXP LPC3250";
+	compatible = "ea,ea3250", "nxp,lpc3250";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x4000000>;
+	};
+
+	ahb {
+		mac: ethernet@31060000 {
+			phy-mode = "rmii";
+			use-iram;
+		};
+
+		/* Here, choose exactly one from: ohci, usbd */
+		ohci@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+
+/*
+		usbd@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+*/
+
+		/* 128MB Flash via SLC NAND controller */
+		slc: flash@20020000 {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nxp,wdr-clks = <14>;
+			nxp,wwidth = <260000000>;
+			nxp,whold = <104000000>;
+			nxp,wsetup = <200000000>;
+			nxp,rdr-clks = <14>;
+			nxp,rwidth = <34666666>;
+			nxp,rhold = <104000000>;
+			nxp,rsetup = <200000000>;
+			nand-on-flash-bbt;
+			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+			mtd0@00000000 {
+				label = "ea3250-boot";
+				reg = <0x00000000 0x00080000>;
+				read-only;
+			};
+
+			mtd1@00080000 {
+				label = "ea3250-uboot";
+				reg = <0x00080000 0x000c0000>;
+				read-only;
+			};
+
+			mtd2@00140000 {
+				label = "ea3250-kernel";
+				reg = <0x00140000 0x00400000>;
+			};
+
+			mtd3@00540000 {
+				label = "ea3250-rootfs";
+				reg = <0x00540000 0x07ac0000>;
+			};
+		};
+
+		apb {
+			uart5: serial@40090000 {
+				status = "okay";
+			};
+
+			uart3: serial@40080000 {
+				status = "okay";
+			};
+
+			uart6: serial@40098000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@400A0000 {
+				clock-frequency = <100000>;
+
+				eeprom@50 {
+					compatible = "at,24c256";
+					reg = <0x50>;
+				};
+
+				eeprom@57 {
+					compatible = "at,24c64";
+					reg = <0x57>;
+				};
+
+				uda1380: uda1380@18 {
+					compatible = "nxp,uda1380";
+					reg = <0x18>;
+					power-gpio = <&gpio 0x59 0>;
+					reset-gpio = <&gpio 0x51 0>;
+					dac-clk = "wspll";
+				};
+
+				pca9532: pca9532@60 {
+					compatible = "nxp,pca9532";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x60>;
+				};
+			};
+
+			i2c2: i2c@400A8000 {
+				clock-frequency = <100000>;
+			};
+
+			i2cusb: i2c@31020300 {
+				clock-frequency = <100000>;
+
+				isp1301: usb-transceiver@2d {
+					compatible = "nxp,isp1301";
+					reg = <0x2d>;
+				};
+			};
+
+			sd@20098000 {
+				wp-gpios = <&pca9532 5 0>;
+				cd-gpios = <&pca9532 4 0>;
+				cd-inverted;
+				bus-width = <4>;
+				status = "okay";
+			};
+		};
+
+		fab {
+			uart1: serial@40014000 {
+				status = "okay";
+			};
+
+			/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
+			adc@40048000 {
+				status = "okay";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@21 {
+			label = "Interrupt Key";
+			linux,code = <103>;
+			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
+		};
+		key1 {
+			label = "KEY1";
+			linux,code = <1>;
+			gpios = <&pca9532 0 0>;
+		};
+		key2 {
+			label = "KEY2";
+			linux,code = <2>;
+			gpios = <&pca9532 1 0>;
+		};
+		key3 {
+			label = "KEY3";
+			linux,code = <3>;
+			gpios = <&pca9532 2 0>;
+		};
+		key4 {
+			label = "KEY4";
+			linux,code = <4>;
+			gpios = <&pca9532 3 0>;
+		};
+		joy0 {
+			label = "Joystick Key 0";
+			linux,code = <10>;
+			gpios = <&gpio 2 0 0>; /* P2.0 */
+		};
+		joy1 {
+			label = "Joystick Key 1";
+			linux,code = <11>;
+			gpios = <&gpio 2 1 0>; /* P2.1 */
+		};
+		joy2 {
+			label = "Joystick Key 2";
+			linux,code = <12>;
+			gpios = <&gpio 2 2 0>; /* P2.2 */
+		};
+		joy3 {
+			label = "Joystick Key 3";
+			linux,code = <13>;
+			gpios = <&gpio 2 3 0>; /* P2.3 */
+		};
+		joy4 {
+			label = "Joystick Key 4";
+			linux,code = <14>;
+			gpios = <&gpio 2 4 0>; /* P2.4 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* LEDs on OEM Board */
+
+		led1 {
+			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
+			linux,default-trigger = "timer";
+			default-state = "off";
+		};
+
+		led2 {
+			gpios = <&gpio 2 10 1>; /* P2.10, active low */
+			default-state = "off";
+		};
+
+		led3 {
+			gpios = <&gpio 2 11 1>; /* P2.11, active low */
+			default-state = "off";
+		};
+
+		led4 {
+			gpios = <&gpio 2 12 1>; /* P2.12, active low */
+			default-state = "off";
+		};
+
+		/* LEDs on Base Board */
+
+		lede1 {
+			gpios = <&pca9532 8 0>;
+			default-state = "off";
+		};
+		lede2 {
+			gpios = <&pca9532 9 0>;
+			default-state = "off";
+		};
+		lede3 {
+			gpios = <&pca9532 10 0>;
+			default-state = "off";
+		};
+		lede4 {
+			gpios = <&pca9532 11 0>;
+			default-state = "off";
+		};
+		lede5 {
+			gpios = <&pca9532 12 0>;
+			default-state = "off";
+		};
+		lede6 {
+			gpios = <&pca9532 13 0>;
+			default-state = "off";
+		};
+		lede7 {
+			gpios = <&pca9532 14 0>;
+			default-state = "off";
+		};
+		lede8 {
+			gpios = <&pca9532 15 0>;
+			default-state = "off";
+		};
+	};
+};
diff --git a/src/arm/ecx-2000.dts b/src/arm/ecx-2000.dts
new file mode 100644
index 000000000000..2ccbb57fbfa8
--- /dev/null
+++ b/src/arm/ecx-2000.dts
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+	model = "Calxeda ECX-2000";
+	compatible = "calxeda,ecx-2000";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	clock-ranges;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0xff800000>;
+	};
+
+	memory@200000000 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000002 0x00000000 0x00000003 0x00000000>;
+	};
+
+	soc {
+		ranges = <0x00000000 0x00000000 0x00000000 0xffffffff>;
+
+		timer {
+			compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; 			interrupts = <1 13 0xf08>,
+				<1 14 0xf08>,
+				<1 11 0xf08>,
+				<1 10 0xf08>;
+		};
+
+		memory-controller@fff00000 {
+			compatible = "calxeda,ecx-2000-ddr-ctrl";
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 91 4>;
+		};
+
+		intc: interrupt-controller@fff11000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+			interrupt-controller;
+			interrupts = <1 9 0xf04>;
+			reg = <0xfff11000 0x1000>,
+			      <0xfff12000 0x1000>,
+			      <0xfff14000 0x2000>,
+			      <0xfff16000 0x2000>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+		};
+	};
+};
+
+/include/ "ecx-common.dtsi"
diff --git a/src/arm/ecx-common.dtsi b/src/arm/ecx-common.dtsi
new file mode 100644
index 000000000000..b90045a8f8e3
--- /dev/null
+++ b/src/arm/ecx-common.dtsi
@@ -0,0 +1,241 @@
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/ {
+	chosen {
+		bootargs = "console=ttyAMA0";
+	};
+
+	psci {
+		compatible	= "arm,psci";
+		method		= "smc";
+		cpu_suspend	= <0x84000002>;
+		cpu_off		= <0x84000004>;
+		cpu_on		= <0x84000006>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+
+		sata@ffe08000 {
+			compatible = "calxeda,hb-ahci";
+			reg = <0xffe08000 0x10000>;
+			interrupts = <0 83 4>;
+			dma-coherent;
+			calxeda,port-phys = <&combophy5 0 &combophy0 0
+					     &combophy0 1 &combophy0 2
+					     &combophy0 3>;
+			calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+			calxeda,led-order = <4 0 1 2 3>;
+		};
+
+		sdhci@ffe0e000 {
+			compatible = "calxeda,hb-sdhci";
+			reg = <0xffe0e000 0x1000>;
+			interrupts = <0 90 4>;
+			clocks = <&eclk>;
+			status = "disabled";
+		};
+
+		ipc@fff20000 {
+			compatible = "arm,pl320", "arm,primecell";
+			reg = <0xfff20000 0x1000>;
+			interrupts = <0 7 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpioe: gpio@fff30000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff30000 0x1000>;
+			interrupts = <0 14 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpiof: gpio@fff31000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff31000 0x1000>;
+			interrupts = <0 15 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpiog: gpio@fff32000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff32000 0x1000>;
+			interrupts = <0 16 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpioh: gpio@fff33000 {
+			#gpio-cells = <2>;
+			compatible = "arm,pl061", "arm,primecell";
+			gpio-controller;
+			reg = <0xfff33000 0x1000>;
+			interrupts = <0 17 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		timer@fff34000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xfff34000 0x1000>;
+			interrupts = <0 18 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc@fff35000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0xfff35000 0x1000>;
+			interrupts = <0 19 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		serial@fff36000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xfff36000 0x1000>;
+			interrupts = <0 20 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		smic@fff3a000 {
+			compatible = "ipmi-smic";
+			device_type = "ipmi";
+			reg = <0xfff3a000 0x1000>;
+			interrupts = <0 24 4>;
+			reg-size = <4>;
+			reg-spacing = <4>;
+		};
+
+		sregs@fff3c000 {
+			compatible = "calxeda,hb-sregs";
+			reg = <0xfff3c000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				osc: oscillator {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <33333000>;
+				};
+
+				ddrpll: ddrpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x108>;
+				};
+
+				a9pll: a9pll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x100>;
+				};
+
+				a9periphclk: a9periphclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9periph-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				a9bclk: a9bclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-a9bus-clock";
+					clocks = <&a9pll>;
+					reg = <0x104>;
+				};
+
+				emmcpll: emmcpll {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-pll-clock";
+					clocks = <&osc>;
+					reg = <0x10C>;
+				};
+
+				eclk: eclk {
+					#clock-cells = <0>;
+					compatible = "calxeda,hb-emmc-clock";
+					clocks = <&emmcpll>;
+					reg = <0x114>;
+				};
+
+				pclk: pclk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <150000000>;
+				};
+			};
+		};
+
+		dma@fff3d000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xfff3d000 0x1000>;
+			interrupts = <0 92 4>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		ethernet@fff50000 {
+			compatible = "calxeda,hb-xgmac";
+			reg = <0xfff50000 0x1000>;
+			interrupts = <0 77 4  0 78 4  0 79 4>;
+			dma-coherent;
+		};
+
+		ethernet@fff51000 {
+			compatible = "calxeda,hb-xgmac";
+			reg = <0xfff51000 0x1000>;
+			interrupts = <0 80 4  0 81 4  0 82 4>;
+			dma-coherent;
+		};
+
+		combophy0: combo-phy@fff58000 {
+			compatible = "calxeda,hb-combophy";
+			#phy-cells = <1>;
+			reg = <0xfff58000 0x1000>;
+			phydev = <5>;
+		};
+
+		combophy5: combo-phy@fff5d000 {
+			compatible = "calxeda,hb-combophy";
+			#phy-cells = <1>;
+			reg = <0xfff5d000 0x1000>;
+			phydev = <31>;
+		};
+	};
+};
diff --git a/src/arm/efm32gg-dk3750.dts b/src/arm/efm32gg-dk3750.dts
new file mode 100644
index 000000000000..b4031fa4a567
--- /dev/null
+++ b/src/arm/efm32gg-dk3750.dts
@@ -0,0 +1,86 @@
+/*
+ * Device tree for EFM32GG-DK3750 development board.
+ *
+ * Documentation available from
+ * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf
+ */
+
+/dts-v1/;
+#include "efm32gg.dtsi"
+
+/ {
+	model = "Energy Micro Giant Gecko Development Kit";
+	compatible = "efm32,dk3750";
+
+	chosen {
+		bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
+	};
+
+	memory {
+		reg = <0x88000000 0x400000>;
+	};
+
+	soc {
+		adc@40002000 {
+			status = "ok";
+		};
+
+		i2c@4000a000 {
+			efm32,location = <3>;
+			status = "ok";
+
+			temp@48 {
+				compatible = "st,stds75";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "microchip,24c02";
+				reg = <0x50>;
+				pagesize = <16>;
+			};
+		};
+
+		spi0: spi@4000c000 { /* USART0 */
+			cs-gpios = <&gpio 68 1>; // E4
+			location = <1>;
+			status = "ok";
+
+			microsd@0 {
+				compatible = "mmc-spi-slot";
+				spi-max-frequency = <100000>;
+				voltage-ranges = <3200 3400>;
+				broken-cd;
+				reg = <0>;
+			};
+		};
+
+		spi1: spi@4000c400 { /* USART1 */
+			cs-gpios = <&gpio 51 1>; // D3
+			location = <1>;
+			status = "ok";
+
+			ks8851@0 {
+				compatible = "ks8851";
+				spi-max-frequency = <6000000>;
+				reg = <0>;
+				interrupt-parent = <&boardfpga>;
+				interrupts = <4>;
+			};
+		};
+
+		uart4: uart@4000e400 { /* UART1 */
+			location = <2>;
+			status = "ok";
+		};
+
+		boardfpga: boardfpga {
+			compatible = "efm32board";
+			reg = <0x80000000 0x400>;
+			irq-gpios = <&gpio 64 1>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			status = "ok";
+		};
+	};
+};
diff --git a/src/arm/efm32gg.dtsi b/src/arm/efm32gg.dtsi
new file mode 100644
index 000000000000..106d505c5d3d
--- /dev/null
+++ b/src/arm/efm32gg.dtsi
@@ -0,0 +1,172 @@
+/*
+ * Device tree for Energy Micro EFM32 Giant Gecko SoC.
+ *
+ * Documentation available from
+ * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
+ */
+#include "armv7-m.dtsi"
+#include "dt-bindings/clock/efm32-cmu.h"
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	soc {
+		adc: adc@40002000 {
+			compatible = "efm32,adc";
+			reg = <0x40002000 0x400>;
+			interrupts = <7>;
+			clocks = <&cmu clk_HFPERCLKADC0>;
+			status = "disabled";
+		};
+
+		gpio: gpio@40006000 {
+			compatible = "efm32,gpio";
+			reg = <0x40006000 0x1000>;
+			interrupts = <1 11>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			clocks = <&cmu clk_HFPERCLKGPIO>;
+			status = "ok";
+		};
+
+		i2c0: i2c@4000a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "efm32,i2c";
+			reg = <0x4000a000 0x400>;
+			interrupts = <9>;
+			clocks = <&cmu clk_HFPERCLKI2C0>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4000a400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "efm32,i2c";
+			reg = <0x4000a400 0x400>;
+			interrupts = <10>;
+			clocks = <&cmu clk_HFPERCLKI2C1>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+
+		spi0: spi@4000c000 { /* USART0 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "efm32,spi";
+			reg = <0x4000c000 0x400>;
+			interrupts = <3 4>;
+			clocks = <&cmu clk_HFPERCLKUSART0>;
+			status = "disabled";
+		};
+
+		spi1: spi@4000c400 { /* USART1 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "efm32,spi";
+			reg = <0x4000c400 0x400>;
+			interrupts = <15 16>;
+			clocks = <&cmu clk_HFPERCLKUSART1>;
+			status = "disabled";
+		};
+
+		spi2: spi@4000c800 { /* USART2 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "efm32,spi";
+			reg = <0x4000c800 0x400>;
+			interrupts = <18 19>;
+			clocks = <&cmu clk_HFPERCLKUSART2>;
+			status = "disabled";
+		};
+
+		uart0: uart@4000c000 { /* USART0 */
+			compatible = "efm32,uart";
+			reg = <0x4000c000 0x400>;
+			interrupts = <3 4>;
+			clocks = <&cmu clk_HFPERCLKUSART0>;
+			status = "disabled";
+		};
+
+		uart1: uart@4000c400 { /* USART1 */
+			compatible = "efm32,uart";
+			reg = <0x4000c400 0x400>;
+			interrupts = <15 16>;
+			clocks = <&cmu clk_HFPERCLKUSART1>;
+			status = "disabled";
+		};
+
+		uart2: uart@4000c800 { /* USART2 */
+			compatible = "efm32,uart";
+			reg = <0x4000c800 0x400>;
+			interrupts = <18 19>;
+			clocks = <&cmu clk_HFPERCLKUSART2>;
+			status = "disabled";
+		};
+
+		uart3: uart@4000e000 { /* UART0 */
+			compatible = "efm32,uart";
+			reg = <0x4000e000 0x400>;
+			interrupts = <20 21>;
+			clocks = <&cmu clk_HFPERCLKUART0>;
+			status = "disabled";
+		};
+
+		uart4: uart@4000e400 { /* UART1 */
+			compatible = "efm32,uart";
+			reg = <0x4000e400 0x400>;
+			interrupts = <22 23>;
+			clocks = <&cmu clk_HFPERCLKUART1>;
+			status = "disabled";
+		};
+
+		timer0: timer@40010000 {
+			compatible = "efm32,timer";
+			reg = <0x40010000 0x400>;
+			interrupts = <2>;
+			clocks = <&cmu clk_HFPERCLKTIMER0>;
+		};
+
+		timer1: timer@40010400 {
+			compatible = "efm32,timer";
+			reg = <0x40010400 0x400>;
+			interrupts = <12>;
+			clocks = <&cmu clk_HFPERCLKTIMER1>;
+		};
+
+		timer2: timer@40010800 {
+			compatible = "efm32,timer";
+			reg = <0x40010800 0x400>;
+			interrupts = <13>;
+			clocks = <&cmu clk_HFPERCLKTIMER2>;
+		};
+
+		timer3: timer@40010c00 {
+			compatible = "efm32,timer";
+			reg = <0x40010c00 0x400>;
+			interrupts = <14>;
+			clocks = <&cmu clk_HFPERCLKTIMER3>;
+		};
+
+		cmu: cmu@400c8000 {
+			compatible = "efm32gg,cmu";
+			reg = <0x400c8000 0x400>;
+			interrupts = <32>;
+			#clock-cells = <1>;
+		};
+	};
+};
diff --git a/src/arm/elpida_ecb240abacn.dtsi b/src/arm/elpida_ecb240abacn.dtsi
new file mode 100644
index 000000000000..f97f70f83374
--- /dev/null
+++ b/src/arm/elpida_ecb240abacn.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+	elpida_ECB240ABACN: lpddr2 {
+		compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+		density		= <2048>;
+		io-width	= <32>;
+
+		tRPab-min-tck	= <3>;
+		tRCD-min-tck	= <3>;
+		tWR-min-tck	= <3>;
+		tRASmin-min-tck	= <3>;
+		tRRD-min-tck	= <2>;
+		tWTR-min-tck	= <2>;
+		tXP-min-tck	= <2>;
+		tRTP-min-tck	= <2>;
+		tCKE-min-tck	= <3>;
+		tCKESR-min-tck	= <3>;
+		tFAW-min-tck	= <8>;
+
+		timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <400000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+
+		timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <200000000>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <10000>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+	};
+};
diff --git a/src/arm/emev2-kzm9d.dts b/src/arm/emev2-kzm9d.dts
new file mode 100644
index 000000000000..667d323e80a3
--- /dev/null
+++ b/src/arm/emev2-kzm9d.dts
@@ -0,0 +1,96 @@
+/*
+ * Device Tree Source for the KZM9D board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+/dts-v1/;
+
+#include "emev2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "EMEV2 KZM9D Board";
+	compatible = "renesas,kzm9d", "renesas,emev2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
+		stdout-path = &uart1;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-1";
+			linux,code = <KEY_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-2";
+			linux,code = <KEY_2>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		button@3 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-3";
+			linux,code = <KEY_3>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+		button@4 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			label = "DSW2-4";
+			linux,code = <KEY_4>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_1p8v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lan9220@20000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x20000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
+};
diff --git a/src/arm/emev2.dtsi b/src/arm/emev2.dtsi
new file mode 100644
index 000000000000..cc7bfe0ba40a
--- /dev/null
+++ b/src/arm/emev2.dtsi
@@ -0,0 +1,227 @@
+/*
+ * Device Tree Source for the EMEV2 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,emev2";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <533000000>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clock-frequency = <533000000>;
+		};
+	};
+
+	gic: interrupt-controller@e0020000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0xe0028000 0x1000>,
+		      <0xe0020000 0x0100>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 121 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks@e0110000 {
+		compatible = "renesas,emev2-smu";
+		reg = <0xe0110000 0x10000>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		c32ki: c32ki {
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			#clock-cells = <0>;
+		};
+		pll3_fo: pll3_fo {
+			compatible = "fixed-factor-clock";
+			clocks = <&c32ki>;
+			clock-div = <1>;
+			clock-mult = <7000>;
+			#clock-cells = <0>;
+		};
+		usia_u0_sclkdiv: usia_u0_sclkdiv {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x610 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u1_sclkdiv: usib_u1_sclkdiv {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x65c 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u2_sclkdiv: usib_u2_sclkdiv {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x65c 16>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usib_u3_sclkdiv: usib_u3_sclkdiv {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x660 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		usia_u0_sclk: usia_u0_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4a0 1>;
+			clocks = <&usia_u0_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u1_sclk: usib_u1_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4b8 1>;
+			clocks = <&usib_u1_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u2_sclk: usib_u2_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4bc 1>;
+			clocks = <&usib_u2_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		usib_u3_sclk: usib_u3_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x4c0 1>;
+			clocks = <&usib_u3_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		sti_sclk: sti_sclk {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x528 1>;
+			clocks = <&c32ki>;
+			#clock-cells = <0>;
+		};
+	};
+
+	timer@e0180000 {
+		compatible = "renesas,em-sti";
+		reg = <0xe0180000 0x54>;
+		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&sti_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart0: serial@e1020000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1020000 0x38>;
+		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usia_u0_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart1: serial@e1030000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1030000 0x38>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u1_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart2: serial@e1040000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1040000 0x38>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u2_sclk>;
+		clock-names = "sclk";
+	};
+
+	uart3: serial@e1050000 {
+		compatible = "renesas,em-uart";
+		reg = <0xe1050000 0x38>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&usib_u3_sclk>;
+		clock-names = "sclk";
+	};
+
+	gpio0: gpio@e0050000 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 68 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio1: gpio@e0050080 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
+		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 70 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio2: gpio@e0050100 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
+		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 72 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio3: gpio@e0050180 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
+		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio4: gpio@e0050200 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
+		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 76 IRQ_TYPE_LEVEL_HIGH>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/src/arm/ethernut5.dts b/src/arm/ethernut5.dts
index 8f941c2db7c6..243044343ee8 100644
--- a/src/arm/ethernut5.dts
+++ b/src/arm/ethernut5.dts
@@ -6,7 +6,7 @@
  * Licensed under GPLv2.
  */
 /dts-v1/;
-#include "at91sam9260.dtsi"
+#include "at91sam9xe.dtsi"
 
 / {
 	model = "Ethernut 5";
diff --git a/src/arm/exynos3250-monk.dts b/src/arm/exynos3250-monk.dts
new file mode 100644
index 000000000000..1d483c1c8b48
--- /dev/null
+++ b/src/arm/exynos3250-monk.dts
@@ -0,0 +1,636 @@
+/*
+ * Samsung's Exynos3250 based Monk board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Monk board which is based on
+ * Samsung Exynos3250 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos3250.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung Monk board";
+	compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
+
+	aliases {
+		i2c7 = &i2c_max77836;
+	};
+
+	memory {
+		reg =  <0x40000000 0x1ff00000>;
+	};
+
+	firmware@0205F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0205F000 0x1000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		power_key {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	vemmc_reg: voltage-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_EMMC_2.8V-fixed";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 0>;
+		enable-active-high;
+	};
+
+	i2c_max77836: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		max77836: subpmic@25 {
+			compatible = "maxim,max77836";
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 0>;
+			reg = <0x25>;
+			wakeup;
+
+			muic: max77836-muic {
+				compatible = "maxim,max77836-muic";
+			};
+
+			regulators {
+				compatible = "maxim,max77836-regulator";
+				safeout_reg: SAFEOUT {
+					regulator-name = "SAFEOUT";
+				};
+
+				charger_reg: CHARGER {
+					regulator-name = "CHARGER";
+					regulator-min-microamp = <45000>;
+					regulator-max-microamp = <475000>;
+					regulator-boot-on;
+				};
+
+				motor_reg: LDO1 {
+					regulator-name = "MOT_2.7V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <2700000>;
+				};
+
+				LDO2 {
+					regulator-name = "UNUSED_LDO2";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <3950000>;
+				};
+			};
+
+			charger {
+				compatible = "maxim,max77836-charger";
+
+				maxim,constant-uvolt = <4350000>;
+				maxim,fast-charge-uamp = <225000>;
+				maxim,eoc-uamp = <7500>;
+				maxim,ovp-uvolt = <6500000>;
+			};
+		};
+	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_reg>;
+		min-microvolt = <1100000>;
+		max-microvolt = <2700000>;
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+	assigned-clock-rates = <6000000>;
+
+	thermistor-ap {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <100000>;
+		io-channels = <&adc 0>;
+	};
+
+	thermistor-battery {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <100000>;
+		io-channels = <&adc 1>;
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	s2mps14_pmic@66 {
+		compatible = "samsung,s2mps14-pmic";
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 0>;
+		reg = <0x66>;
+		wakeup;
+
+		s2mps14_osc: clocks {
+			compatible = "samsung,s2mps14-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps14_ap", "unused",
+				"s2mps14_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VAP_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VAP_M1_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_AP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VAP_AVDD_PLL1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VAP_PLL_ISO_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VAP_MIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VAP_AVDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VAP_USB_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "V_LPDDR_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "UNUSED_LDO10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "V_EMMC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				samsung,ext-control-gpios = <&gpk0 2 0>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "V_EMMC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				samsung,ext-control-gpios = <&gpk0 2 0>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VSENSOR_2.85V";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "UNUSED_LDO14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "TSP_AVDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "LCD_VDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "UNUSED_LDO17";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "UNUSED_LDO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "TSP_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "LCD_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "UNUSED_LDO21";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "UNUSED_LDO22";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "UNUSED_LDO23";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "UNUSED_LDO24";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "UNUSED_LDO25";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VAP_MIF_1.0V";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VAP_ARM_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VAP_INT3D_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VCC_SUB_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VCC_SUB_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77836-battery";
+		interrupt-parent = <&gpx1>;
+		interrupts = <2 8>;
+		reg = <0x36>;
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&mshc_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	num-slots = <1>;
+	broken-cd;
+	non-removable;
+	cap-mmc-highspeed;
+	desc-num = <4>;
+	mmc-hs200-1_8v;
+	card-detect-delay = <200>;
+	vmmc-supply = <&vemmc_reg>;
+	clock-frequency = <100000000>;
+	clock-freq-min-max = <400000 100000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&serial_0 {
+	assigned-clocks = <&cmu CLK_SCLK_UART0>;
+	assigned-clock-rates = <100000000>;
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&tmu {
+	vtmu-supply = <&ldo7_reg>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&ppmu_dmc0 {
+	status = "okay";
+
+	events {
+		ppmu_dmc0_3: ppmu-event3-dmc0 {
+			event-name = "ppmu-event3-dmc0";
+		};
+	};
+};
+
+&ppmu_dmc1 {
+	status = "okay";
+
+	events {
+		ppmu_dmc1_3: ppmu-event3-dmc1 {
+			event-name = "ppmu-event3-dmc1";
+		};
+	};
+};
+
+&ppmu_leftbus {
+	status = "okay";
+
+	events {
+		ppmu_leftbus_3: ppmu-event3-leftbus {
+			event-name = "ppmu-event3-leftbus";
+		};
+	};
+};
+
+&ppmu_rightbus {
+	status = "okay";
+
+	events {
+		ppmu_rightbus_3: ppmu-event3-rightbus {
+			event-name = "ppmu-event3-rightbus";
+		};
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	sleep0: sleep-state {
+		PIN_SLP(gpa0-0, INPUT, DOWN);
+		PIN_SLP(gpa0-1, INPUT, DOWN);
+		PIN_SLP(gpa0-2, INPUT, DOWN);
+		PIN_SLP(gpa0-3, INPUT, DOWN);
+		PIN_SLP(gpa0-4, INPUT, DOWN);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, DOWN);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, PREV, NONE);
+		PIN_SLP(gpb-1, PREV, NONE);
+		PIN_SLP(gpb-2, PREV, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, DOWN);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, DOWN);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, INPUT, DOWN);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, INPUT, DOWN);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep1>;
+
+	sleep1: sleep-state {
+		PIN_SLP(gpe0-0, PREV, NONE);
+		PIN_SLP(gpe0-1, PREV, NONE);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, DOWN);
+		PIN_SLP(gpe0-4, PREV, NONE);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, PREV, NONE);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, INPUT, DOWN);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+		PIN_SLP(gpe1-5, INPUT, DOWN);
+		PIN_SLP(gpe1-6, INPUT, DOWN);
+		PIN_SLP(gpe1-7, INPUT, NONE);
+
+		PIN_SLP(gpe2-0, INPUT, NONE);
+		PIN_SLP(gpe2-1, INPUT, NONE);
+		PIN_SLP(gpe2-2, INPUT, NONE);
+
+		PIN_SLP(gpk0-0, INPUT, DOWN);
+		PIN_SLP(gpk0-1, INPUT, DOWN);
+		PIN_SLP(gpk0-2, OUT0, NONE);
+		PIN_SLP(gpk0-3, INPUT, DOWN);
+		PIN_SLP(gpk0-4, INPUT, DOWN);
+		PIN_SLP(gpk0-5, INPUT, DOWN);
+		PIN_SLP(gpk0-6, INPUT, DOWN);
+		PIN_SLP(gpk0-7, INPUT, DOWN);
+
+		PIN_SLP(gpk1-0, PREV, NONE);
+		PIN_SLP(gpk1-1, PREV, NONE);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, PREV, NONE);
+		PIN_SLP(gpk1-4, PREV, NONE);
+		PIN_SLP(gpk1-5, PREV, NONE);
+		PIN_SLP(gpk1-6, PREV, NONE);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpl0-0, INPUT, DOWN);
+		PIN_SLP(gpl0-1, INPUT, DOWN);
+		PIN_SLP(gpl0-2, INPUT, DOWN);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+
+		PIN_SLP(gpm0-0, INPUT, DOWN);
+		PIN_SLP(gpm0-1, INPUT, DOWN);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, DOWN);
+		PIN_SLP(gpm0-4, INPUT, DOWN);
+		PIN_SLP(gpm0-5, INPUT, DOWN);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, INPUT, DOWN);
+
+		PIN_SLP(gpm1-0, INPUT, DOWN);
+		PIN_SLP(gpm1-1, INPUT, DOWN);
+		PIN_SLP(gpm1-2, INPUT, DOWN);
+		PIN_SLP(gpm1-3, INPUT, DOWN);
+		PIN_SLP(gpm1-4, INPUT, DOWN);
+		PIN_SLP(gpm1-5, INPUT, DOWN);
+		PIN_SLP(gpm1-6, INPUT, DOWN);
+
+		PIN_SLP(gpm2-0, INPUT, DOWN);
+		PIN_SLP(gpm2-1, INPUT, DOWN);
+		PIN_SLP(gpm2-2, INPUT, DOWN);
+		PIN_SLP(gpm2-3, INPUT, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, INPUT, DOWN);
+		PIN_SLP(gpm3-1, INPUT, DOWN);
+		PIN_SLP(gpm3-2, INPUT, DOWN);
+		PIN_SLP(gpm3-3, INPUT, DOWN);
+		PIN_SLP(gpm3-4, INPUT, DOWN);
+		PIN_SLP(gpm3-5, INPUT, DOWN);
+		PIN_SLP(gpm3-6, INPUT, DOWN);
+		PIN_SLP(gpm3-7, INPUT, DOWN);
+
+		PIN_SLP(gpm4-0, INPUT, DOWN);
+		PIN_SLP(gpm4-1, INPUT, DOWN);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, INPUT, DOWN);
+		PIN_SLP(gpm4-5, INPUT, DOWN);
+		PIN_SLP(gpm4-6, INPUT, DOWN);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+	};
+};
diff --git a/src/arm/exynos3250-pinctrl.dtsi b/src/arm/exynos3250-pinctrl.dtsi
new file mode 100644
index 000000000000..5ab81c39e2c9
--- /dev/null
+++ b/src/arm/exynos3250-pinctrl.dtsi
@@ -0,0 +1,491 @@
+/*
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define PIN_PULL_NONE		0
+#define PIN_PULL_DOWN		1
+#define PIN_PULL_UP		3
+
+#define PIN_PDN_OUT0		0
+#define PIN_PDN_OUT1		1
+#define PIN_PDN_INPUT		2
+#define PIN_PDN_PREV		3
+
+#define PIN_SLP(_pin, _mode, _pull)				\
+	_pin {							\
+		samsung,pins = #_pin;				\
+		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
+	}
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <0x2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	mipi0_clk: mipi0-clk {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe2: gpe2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm0: gpm0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
+				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
+				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpk0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c0: fimc-is-i2c0 {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c1: fimc-is-i2c1 {
+		samsung,pins = "gpm4-2", "gpm4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_uart: fimc-is-uart {
+		samsung,pins = "gpm3-5", "gpm3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/src/arm/exynos3250-rinato.dts b/src/arm/exynos3250-rinato.dts
new file mode 100644
index 000000000000..0b9906880c0c
--- /dev/null
+++ b/src/arm/exynos3250-rinato.dts
@@ -0,0 +1,809 @@
+/*
+ * Samsung's Exynos3250 based Rinato board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Rinato board which is based on
+ * Samsung Exynos3250 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos3250.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung Rinato board";
+	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
+
+	aliases {
+		i2c7 = &i2c_max77836;
+	};
+
+	memory {
+		reg =  <0x40000000 0x1ff00000>;
+	};
+
+	firmware@0205F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0205F000 0x1000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		power_key {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c_max77836: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		max77836: subpmic@25 {
+			compatible = "maxim,max77836";
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 0>;
+			reg = <0x25>;
+			wakeup;
+
+			muic: max77836-muic {
+				compatible = "maxim,max77836-muic";
+			};
+
+			regulators {
+				compatible = "maxim,max77836-regulator";
+				safeout_reg: SAFEOUT {
+					regulator-name = "SAFEOUT";
+				};
+
+				charger_reg: CHARGER {
+					regulator-name = "CHARGER";
+					regulator-min-microamp = <45000>;
+					regulator-max-microamp = <475000>;
+					regulator-boot-on;
+				};
+
+				motor_reg: LDO1 {
+					regulator-name = "MOT_2.7V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <2700000>;
+				};
+
+				LDO2 {
+					regulator-name = "UNUSED_LDO2";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <3950000>;
+				};
+			};
+
+			charger {
+				compatible = "maxim,max77836-charger";
+
+				maxim,constant-uvolt = <4350000>;
+				maxim,fast-charge-uamp = <225000>;
+				maxim,eoc-uamp = <7500>;
+				maxim,ovp-uvolt = <6500000>;
+			};
+		};
+	};
+
+	haptics {
+		compatible = "regulator-haptic";
+		haptic-supply = <&motor_reg>;
+		min-microvolt = <1100000>;
+		max-microvolt = <2700000>;
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+	assigned-clock-rates = <6000000>;
+
+	thermistor-ap {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <100000>;
+		io-channels = <&adc 0>;
+	};
+
+	thermistor-battery {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;
+		pullup-ohm = <100000>;
+		pulldown-ohm = <100000>;
+		io-channels = <&adc 1>;
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&dsi_0 {
+	vddcore-supply = <&ldo6_reg>;
+	vddio-supply = <&ldo6_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_in>;
+				samsung,burst-clock-frequency = <250000000>;
+				samsung,esc-clock-frequency = <20000000>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "samsung,s6e63j0x03";
+		reg = <0>;
+		vdd3-supply = <&ldo16_reg>;
+		vci-supply = <&ldo20_reg>;
+		reset-gpios = <&gpe0 1 0>;
+		te-gpios = <&gpx0 6 0>;
+		power-on-delay= <30>;
+		power-off-delay= <120>;
+		reset-delay = <5>;
+		init-delay = <100>;
+		flip-horizontal;
+		flip-vertical;
+		panel-width-mm = <29>;
+		panel-height-mm = <29>;
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <0>;
+				hactive = <320>;
+				vactive = <320>;
+				hfront-porch = <1>;
+				hback-porch = <1>;
+				hsync-len = <1>;
+				vfront-porch = <150>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+
+		port {
+			dsi_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&fimd {
+	status = "okay";
+
+	i80-if-timings {
+		cs-setup = <0>;
+		wr-setup = <0>;
+		wr-act = <1>;
+		wr-hold = <0>;
+	};
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	s2mps14_pmic@66 {
+		compatible = "samsung,s2mps14-pmic";
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 0>;
+		reg = <0x66>;
+		wakeup;
+
+		s2mps14_osc: clocks {
+			compatible = "samsung,s2mps14-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps14_ap", "unused",
+				"s2mps14_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VAP_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VAP_M1_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_AP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VAP_AVDD_PLL1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VAP_PLL_ISO_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VAP_VMIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VAP_AVDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VAP_USB_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "V_LPDDR_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "UNUSED_LDO10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "V_EMMC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				samsung,ext-control-gpios = <&gpk0 2 0>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "V_EMMC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				samsung,ext-control-gpios = <&gpk0 2 0>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "CAM_AVDD_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "UNUSED_LDO14";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "TSP_AVDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "LCD_VDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "V_IRLED_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "CAM_AF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "TSP_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "LCD_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "CAM_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "CAM_DVDD_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "HRM_VCC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "HRM_VCC_3.3V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "UNUSED_LDO25";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VAP_MIF_1.0V";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VAP_ARM_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VAP_INT3D_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VCC_SUB_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VCC_SUB_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	status = "okay";
+
+	fuelgauge@36 {
+		compatible = "maxim,max77836-battery";
+		interrupt-parent = <&gpx1>;
+		interrupts = <2 8>;
+		reg = <0x36>;
+	};
+};
+
+&i2s2 {
+	status = "okay";
+};
+
+&mfc {
+	status = "okay";
+};
+
+&mshc_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	num-slots = <1>;
+	broken-cd;
+	non-removable;
+	cap-mmc-highspeed;
+	desc-num = <4>;
+	mmc-hs200-1_8v;
+	card-detect-delay = <200>;
+	vmmc-supply = <&ldo12_reg>;
+	clock-frequency = <100000000>;
+	clock-freq-min-max = <400000 100000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&serial_0 {
+	assigned-clocks = <&cmu CLK_SCLK_UART0>;
+	assigned-clock-rates = <100000000>;
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&tmu {
+	vtmu-supply = <&ldo7_reg>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&ppmu_dmc0 {
+	status = "okay";
+
+	events {
+		ppmu_dmc0_3: ppmu-event3-dmc0 {
+			event-name = "ppmu-event3-dmc0";
+		};
+	};
+};
+
+&ppmu_dmc1 {
+	status = "okay";
+
+	events {
+		ppmu_dmc1_3: ppmu-event3-dmc1 {
+			event-name = "ppmu-event3-dmc1";
+		};
+	};
+};
+
+&ppmu_leftbus {
+	status = "okay";
+
+	events {
+		ppmu_leftbus_3: ppmu-event3-leftbus {
+			event-name = "ppmu-event3-leftbus";
+		};
+	};
+};
+
+&ppmu_rightbus {
+	status = "okay";
+
+	events {
+		ppmu_rightbus_3: ppmu-event3-rightbus {
+			event-name = "ppmu-event3-rightbus";
+		};
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	sleep0: sleep-state {
+		PIN_SLP(gpa0-0, INPUT, DOWN);
+		PIN_SLP(gpa0-1, INPUT, DOWN);
+		PIN_SLP(gpa0-2, INPUT, DOWN);
+		PIN_SLP(gpa0-3, INPUT, DOWN);
+		PIN_SLP(gpa0-4, INPUT, DOWN);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, DOWN);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, PREV, NONE);
+		PIN_SLP(gpb-1, PREV, NONE);
+		PIN_SLP(gpb-2, PREV, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, DOWN);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, DOWN);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, INPUT, DOWN);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, INPUT, DOWN);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep1>;
+
+	sleep1: sleep-state {
+		PIN_SLP(gpe0-0, PREV, NONE);
+		PIN_SLP(gpe0-1, PREV, NONE);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, UP);
+		PIN_SLP(gpe0-4, INPUT, DOWN);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, PREV, NONE);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, INPUT, DOWN);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+		PIN_SLP(gpe1-5, INPUT, DOWN);
+		PIN_SLP(gpe1-6, INPUT, DOWN);
+		PIN_SLP(gpe1-7, INPUT, NONE);
+
+		PIN_SLP(gpe2-0, INPUT, NONE);
+		PIN_SLP(gpe2-1, INPUT, NONE);
+		PIN_SLP(gpe2-2, INPUT, NONE);
+
+		PIN_SLP(gpk0-0, INPUT, DOWN);
+		PIN_SLP(gpk0-1, INPUT, DOWN);
+		PIN_SLP(gpk0-2, OUT0, NONE);
+		PIN_SLP(gpk0-3, INPUT, DOWN);
+		PIN_SLP(gpk0-4, INPUT, DOWN);
+		PIN_SLP(gpk0-5, INPUT, DOWN);
+		PIN_SLP(gpk0-6, INPUT, DOWN);
+		PIN_SLP(gpk0-7, INPUT, DOWN);
+
+		PIN_SLP(gpk1-0, INPUT, DOWN);
+		PIN_SLP(gpk1-1, INPUT, DOWN);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, INPUT, DOWN);
+		PIN_SLP(gpk1-4, INPUT, DOWN);
+		PIN_SLP(gpk1-5, INPUT, DOWN);
+		PIN_SLP(gpk1-6, INPUT, DOWN);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpl0-0, INPUT, DOWN);
+		PIN_SLP(gpl0-1, INPUT, DOWN);
+		PIN_SLP(gpl0-2, INPUT, DOWN);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+
+		PIN_SLP(gpm0-0, INPUT, DOWN);
+		PIN_SLP(gpm0-1, INPUT, DOWN);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, DOWN);
+		PIN_SLP(gpm0-4, INPUT, DOWN);
+		PIN_SLP(gpm0-5, INPUT, DOWN);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, INPUT, DOWN);
+
+		PIN_SLP(gpm1-0, INPUT, DOWN);
+		PIN_SLP(gpm1-1, INPUT, DOWN);
+		PIN_SLP(gpm1-2, INPUT, DOWN);
+		PIN_SLP(gpm1-3, INPUT, DOWN);
+		PIN_SLP(gpm1-4, INPUT, DOWN);
+		PIN_SLP(gpm1-5, INPUT, DOWN);
+		PIN_SLP(gpm1-6, INPUT, DOWN);
+
+		PIN_SLP(gpm2-0, INPUT, DOWN);
+		PIN_SLP(gpm2-1, INPUT, DOWN);
+		PIN_SLP(gpm2-2, INPUT, DOWN);
+		PIN_SLP(gpm2-3, INPUT, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, INPUT, DOWN);
+		PIN_SLP(gpm3-1, INPUT, DOWN);
+		PIN_SLP(gpm3-2, INPUT, DOWN);
+		PIN_SLP(gpm3-3, INPUT, DOWN);
+		PIN_SLP(gpm3-4, INPUT, DOWN);
+		PIN_SLP(gpm3-5, INPUT, DOWN);
+		PIN_SLP(gpm3-6, INPUT, DOWN);
+		PIN_SLP(gpm3-7, INPUT, DOWN);
+
+		PIN_SLP(gpm4-0, INPUT, DOWN);
+		PIN_SLP(gpm4-1, INPUT, DOWN);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, INPUT, DOWN);
+		PIN_SLP(gpm4-5, INPUT, DOWN);
+		PIN_SLP(gpm4-6, INPUT, DOWN);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+	};
+};
diff --git a/src/arm/exynos3250.dtsi b/src/arm/exynos3250.dtsi
new file mode 100644
index 000000000000..277b48b0b6f9
--- /dev/null
+++ b/src/arm/exynos3250.dtsi
@@ -0,0 +1,621 @@
+/*
+ * Samsung's Exynos3250 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos3250.h>
+
+/ {
+	compatible = "samsung,exynos3250";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		mshc0 = &mshc_0;
+		mshc1 = &mshc_1;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fixed-rate-clocks {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xusbxti: clock@0 {
+				compatible = "fixed-clock";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xusbxti";
+			};
+
+			xxti: clock@1 {
+				compatible = "fixed-clock";
+				reg = <1>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xxti";
+			};
+
+			xtcxo: clock@2 {
+				compatible = "fixed-clock";
+				reg = <2>;
+				clock-frequency = <0>;
+				#clock-cells = <0>;
+				clock-output-names = "xtcxo";
+			};
+		};
+
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x40000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@3f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x3f000 0x1000>;
+			};
+		};
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		sys_reg: syscon@10010000 {
+			compatible = "samsung,exynos3-sysreg", "syscon";
+			reg = <0x10010000 0x400>;
+		};
+
+		pmu_system_controller: system-controller@10020000 {
+			compatible = "samsung,exynos3250-pmu", "syscon";
+			reg = <0x10020000 0x4000>;
+		};
+
+		mipi_phy: video-phy@10020710 {
+			compatible = "samsung,s5pv210-mipi-video-phy";
+			reg = <0x10020710 8>;
+			#phy-cells = <1>;
+		};
+
+		pd_cam: cam-power-domain@10023C00 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C00 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		pd_mfc: mfc-power-domain@10023C40 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C40 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		pd_g3d: g3d-power-domain@10023C60 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C60 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		pd_lcd0: lcd0-power-domain@10023C80 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023C80 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		pd_isp: isp-power-domain@10023CA0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023CA0 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		cmu: clock-controller@10030000 {
+			compatible = "samsung,exynos3250-cmu";
+			reg = <0x10030000 0x20000>;
+			#clock-cells = <1>;
+		};
+
+		cmu_dmc: clock-controller@105C0000 {
+			compatible = "samsung,exynos3250-cmu-dmc";
+			reg = <0x105C0000 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		rtc: rtc@10070000 {
+			compatible = "samsung,exynos3250-rtc";
+			reg = <0x10070000 0x100>;
+			interrupts = <0 73 0>, <0 74 0>;
+			status = "disabled";
+		};
+
+		tmu: tmu@100C0000 {
+			compatible = "samsung,exynos3250-tmu";
+			reg = <0x100C0000 0x100>;
+			interrupts = <0 216 0>;
+			clocks = <&cmu CLK_TMU_APBIF>;
+			clock-names = "tmu_apbif";
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+			      <0x10482000 0x1000>,
+			      <0x10484000 0x2000>,
+			      <0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		mct@10050000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
+				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos3250-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <0 225 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupts = <0 48 0>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos3250-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <0 240 0>;
+		};
+
+		fimd: fimd@11c00000 {
+			compatible = "samsung,exynos3250-fimd";
+			reg = <0x11c00000 0x30000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
+			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
+			clock-names = "sclk_fimd", "fimd";
+			power-domains = <&pd_lcd0>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		dsi_0: dsi@11C80000 {
+			compatible = "samsung,exynos3250-mipi-dsi";
+			reg = <0x11C80000 0x10000>;
+			interrupts = <0 83 0>;
+			samsung,phy-type = <0>;
+			power-domains = <&pd_lcd0>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>;
+			clock-names = "bus_clk", "pll_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsotg: hsotg@12480000 {
+			compatible = "snps,dwc2";
+			reg = <0x12480000 0x20000>;
+			interrupts = <0 141 0>;
+			clocks = <&cmu CLK_USBOTG>;
+			clock-names = "otg";
+			phys = <&exynos_usbphy 0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		mshc_0: mshc@12510000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12510000 0x1000>;
+			interrupts = <0 142 0>;
+			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mshc_1: mshc@12520000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12520000 0x1000>;
+			interrupts = <0 143 0>;
+			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		exynos_usbphy: exynos-usbphy@125B0000 {
+			compatible = "samsung,exynos3250-usb2-phy";
+			reg = <0x125B0000 0x100>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
+			clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma0: pdma@12680000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12680000 0x1000>;
+				interrupts = <0 138 0>;
+				clocks = <&cmu CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@12690000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12690000 0x1000>;
+				interrupts = <0 139 0>;
+				clocks = <&cmu CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		adc: adc@126C0000 {
+			compatible = "samsung,exynos3250-adc",
+				     "samsung,exynos-adc-v2";
+			reg = <0x126C0000 0x100>;
+			interrupts = <0 137 0>;
+			clock-names = "adc", "sclk";
+			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		mfc: codec@13400000 {
+			compatible = "samsung,mfc-v7";
+			reg = <0x13400000 0x10000>;
+			interrupts = <0 102 0>;
+			clock-names = "mfc", "sclk_mfc";
+			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
+			power-domains = <&pd_mfc>;
+			status = "disabled";
+		};
+
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <0 109 0>;
+			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_data &uart0_fctl>;
+			status = "disabled";
+		};
+
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <0 110 0>;
+			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_data>;
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13860000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <0 113 0>;
+			clocks = <&cmu CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13870000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <0 114 0>;
+			clocks = <&cmu CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13880000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <0 115 0>;
+			clocks = <&cmu CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13890000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <0 116 0>;
+			clocks = <&cmu CLK_I2C3>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			status = "disabled";
+		};
+
+		i2c_4: i2c@138A0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138A0000 0x100>;
+			interrupts = <0 117 0>;
+			clocks = <&cmu CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
+
+		i2c_5: i2c@138B0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138B0000 0x100>;
+			interrupts = <0 118 0>;
+			clocks = <&cmu CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
+
+		i2c_6: i2c@138C0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138C0000 0x100>;
+			interrupts = <0 119 0>;
+			clocks = <&cmu CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
+
+		i2c_7: i2c@138D0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138D0000 0x100>;
+			interrupts = <0 120 0>;
+			clocks = <&cmu CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@13920000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13920000 0x100>;
+			interrupts = <0 121 0>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			status = "disabled";
+		};
+
+		spi_1: spi@13930000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13930000 0x100>;
+			interrupts = <0 122 0>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@13970000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0x13970000 0x100>;
+			interrupts = <0 126 0>;
+			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0";
+			dmas = <&pdma0 14>, <&pdma0 13>;
+			dma-names = "tx", "rx";
+			pinctrl-0 = <&i2s2_bus>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		pwm: pwm@139D0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x139D0000 0x1000>;
+			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+				     <0 107 0>, <0 108 0>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pmu {
+			compatible = "arm,cortex-a7-pmu";
+			interrupts = <0 18 0>, <0 19 0>;
+		};
+
+		ppmu_dmc0: ppmu_dmc0@106a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106a0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_dmc1: ppmu_dmc1@106b0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106b0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_cpu: ppmu_cpu@106c0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106c0000 0x2000>;
+			status = "disabled";
+		};
+
+		ppmu_rightbus: ppmu_rightbus@112a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x112a0000 0x2000>;
+			clocks = <&cmu CLK_PPMURIGHT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_leftbus: ppmu_leftbus0@116a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x116a0000 0x2000>;
+			clocks = <&cmu CLK_PPMULEFT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_camif: ppmu_camif@11ac0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x11ac0000 0x2000>;
+			clocks = <&cmu CLK_PPMUCAMIF>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_lcd0: ppmu_lcd0@11e40000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x11e40000 0x2000>;
+			clocks = <&cmu CLK_PPMULCD0>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_fsys: ppmu_fsys@12630000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x12630000 0x2000>;
+			clocks = <&cmu CLK_PPMUFILE>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_g3d: ppmu_g3d@13220000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13220000 0x2000>;
+			clocks = <&cmu CLK_PPMUG3D>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+
+		ppmu_mfc: ppmu_mfc@13660000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13660000 0x2000>;
+			clocks = <&cmu CLK_PPMUMFC_L>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynos3250-pinctrl.dtsi"
diff --git a/src/arm/exynos4.dtsi b/src/arm/exynos4.dtsi
new file mode 100644
index 000000000000..76173cacd450
--- /dev/null
+++ b/src/arm/exynos4.dtsi
@@ -0,0 +1,773 @@
+/*
+ * Samsung's Exynos4 SoC series common device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4 SoC series device nodes are listed in this file.  Particular
+ * SoCs from Exynos4 series can include this file and provide values for SoCs
+ * specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos4.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+		csis0 = &csis_0;
+		csis1 = &csis_1;
+		fimc0 = &fimc_0;
+		fimc1 = &fimc_1;
+		fimc2 = &fimc_2;
+		fimc3 = &fimc_3;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+	};
+
+	clock_audss: clock-controller@03810000 {
+		compatible = "samsung,exynos4210-audss-clock";
+		reg = <0x03810000 0x0C>;
+		#clock-cells = <1>;
+	};
+
+	i2s0: i2s@03830000 {
+		compatible = "samsung,s5pv210-i2s";
+		reg = <0x03830000 0x100>;
+		clocks = <&clock_audss EXYNOS_I2S_BUS>;
+		clock-names = "iis";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk0";
+		dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
+		dma-names = "tx", "rx", "tx-sec";
+		samsung,idma-addr = <0x03000000>;
+		#sound-dai-cells = <1>;
+		status = "disabled";
+	};
+
+	chipid@10000000 {
+		compatible = "samsung,exynos4210-chipid";
+		reg = <0x10000000 0x100>;
+	};
+
+	mipi_phy: video-phy@10020710 {
+		compatible = "samsung,s5pv210-mipi-video-phy";
+		reg = <0x10020710 8>;
+		#phy-cells = <1>;
+		syscon = <&pmu_system_controller>;
+	};
+
+	pd_mfc: mfc-power-domain@10023C40 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C40 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	pd_g3d: g3d-power-domain@10023C60 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C60 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	pd_lcd0: lcd0-power-domain@10023C80 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C80 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	pd_tv: tv-power-domain@10023C20 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C20 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	pd_cam: cam-power-domain@10023C00 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C00 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	pd_gps: gps-power-domain@10023CE0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CE0 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	pd_gps_alive: gps-alive-power-domain@10023D00 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023D00 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	gic: interrupt-controller@10490000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
+	};
+
+	combiner: interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0x10440000 0x1000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>, <3 2>;
+	};
+
+	sys_reg: syscon@10010000 {
+		compatible = "samsung,exynos4-sysreg", "syscon";
+		reg = <0x10010000 0x400>;
+	};
+
+	pmu_system_controller: system-controller@10020000 {
+		compatible = "samsung,exynos4210-pmu", "syscon";
+		reg = <0x10020000 0x4000>;
+	};
+
+	dsi_0: dsi@11C80000 {
+		compatible = "samsung,exynos4210-mipi-dsi";
+		reg = <0x11C80000 0x10000>;
+		interrupts = <0 79 0>;
+		power-domains = <&pd_lcd0>;
+		phys = <&mipi_phy 1>;
+		phy-names = "dsim";
+		clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
+		clock-names = "bus_clk", "pll_clk";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	camera {
+		compatible = "samsung,fimc", "simple-bus";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#clock-cells = <1>;
+		clock-output-names = "cam_a_clkout", "cam_b_clkout";
+		ranges;
+
+		fimc_0: fimc@11800000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11800000 0x1000>;
+			interrupts = <0 84 0>;
+			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
+			clock-names = "fimc", "sclk_fimc";
+			power-domains = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_1: fimc@11810000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11810000 0x1000>;
+			interrupts = <0 85 0>;
+			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
+			clock-names = "fimc", "sclk_fimc";
+			power-domains = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_2: fimc@11820000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11820000 0x1000>;
+			interrupts = <0 86 0>;
+			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
+			clock-names = "fimc", "sclk_fimc";
+			power-domains = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		fimc_3: fimc@11830000 {
+			compatible = "samsung,exynos4210-fimc";
+			reg = <0x11830000 0x1000>;
+			interrupts = <0 87 0>;
+			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
+			clock-names = "fimc", "sclk_fimc";
+			power-domains = <&pd_cam>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
+
+		csis_0: csis@11880000 {
+			compatible = "samsung,exynos4210-csis";
+			reg = <0x11880000 0x4000>;
+			interrupts = <0 78 0>;
+			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
+			clock-names = "csis", "sclk_csis";
+			bus-width = <4>;
+			power-domains = <&pd_cam>;
+			phys = <&mipi_phy 0>;
+			phy-names = "csis";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		csis_1: csis@11890000 {
+			compatible = "samsung,exynos4210-csis";
+			reg = <0x11890000 0x4000>;
+			interrupts = <0 80 0>;
+			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
+			clock-names = "csis", "sclk_csis";
+			bus-width = <2>;
+			power-domains = <&pd_cam>;
+			phys = <&mipi_phy 2>;
+			phy-names = "csis";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	watchdog@10060000 {
+		compatible = "samsung,s3c2410-wdt";
+		reg = <0x10060000 0x100>;
+		interrupts = <0 43 0>;
+		clocks = <&clock CLK_WDT>;
+		clock-names = "watchdog";
+		status = "disabled";
+	};
+
+	rtc@10070000 {
+		compatible = "samsung,s3c6410-rtc";
+		reg = <0x10070000 0x100>;
+		interrupts = <0 44 0>, <0 45 0>;
+		clocks = <&clock CLK_RTC>;
+		clock-names = "rtc";
+		status = "disabled";
+	};
+
+	keypad@100A0000 {
+		compatible = "samsung,s5pv210-keypad";
+		reg = <0x100A0000 0x100>;
+		interrupts = <0 109 0>;
+		clocks = <&clock CLK_KEYIF>;
+		clock-names = "keypad";
+		status = "disabled";
+	};
+
+	sdhci@12510000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12510000 0x100>;
+		interrupts = <0 73 0>;
+		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+		clock-names = "hsmmc", "mmc_busclk.2";
+		status = "disabled";
+	};
+
+	sdhci@12520000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12520000 0x100>;
+		interrupts = <0 74 0>;
+		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
+		clock-names = "hsmmc", "mmc_busclk.2";
+		status = "disabled";
+	};
+
+	sdhci@12530000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12530000 0x100>;
+		interrupts = <0 75 0>;
+		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
+		clock-names = "hsmmc", "mmc_busclk.2";
+		status = "disabled";
+	};
+
+	sdhci@12540000 {
+		compatible = "samsung,exynos4210-sdhci";
+		reg = <0x12540000 0x100>;
+		interrupts = <0 76 0>;
+		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
+		clock-names = "hsmmc", "mmc_busclk.2";
+		status = "disabled";
+	};
+
+	exynos_usbphy: exynos-usbphy@125B0000 {
+		compatible = "samsung,exynos4210-usb2-phy";
+		reg = <0x125B0000 0x100>;
+		samsung,pmureg-phandle = <&pmu_system_controller>;
+		clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
+		clock-names = "phy", "ref";
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	hsotg@12480000 {
+		compatible = "samsung,s3c6400-hsotg";
+		reg = <0x12480000 0x20000>;
+		interrupts = <0 71 0>;
+		clocks = <&clock CLK_USB_DEVICE>;
+		clock-names = "otg";
+		phys = <&exynos_usbphy 0>;
+		phy-names = "usb2-phy";
+		status = "disabled";
+	};
+
+	ehci@12580000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12580000 0x100>;
+		interrupts = <0 70 0>;
+		clocks = <&clock CLK_USB_HOST>;
+		clock-names = "usbhost";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+		    reg = <0>;
+		    phys = <&exynos_usbphy 1>;
+		    status = "disabled";
+		};
+		port@1 {
+		    reg = <1>;
+		    phys = <&exynos_usbphy 2>;
+		    status = "disabled";
+		};
+		port@2 {
+		    reg = <2>;
+		    phys = <&exynos_usbphy 3>;
+		    status = "disabled";
+		};
+	};
+
+	ohci@12590000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12590000 0x100>;
+		interrupts = <0 70 0>;
+		clocks = <&clock CLK_USB_HOST>;
+		clock-names = "usbhost";
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+		    reg = <0>;
+		    phys = <&exynos_usbphy 1>;
+		    status = "disabled";
+		};
+	};
+
+	i2s1: i2s@13960000 {
+		compatible = "samsung,s3c6410-i2s";
+		reg = <0x13960000 0x100>;
+		clocks = <&clock CLK_I2S1>;
+		clock-names = "iis";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk1";
+		dmas = <&pdma1 12>, <&pdma1 11>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <1>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@13970000 {
+		compatible = "samsung,s3c6410-i2s";
+		reg = <0x13970000 0x100>;
+		clocks = <&clock CLK_I2S2>;
+		clock-names = "iis";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk2";
+		dmas = <&pdma0 14>, <&pdma0 13>;
+		dma-names = "tx", "rx";
+		#sound-dai-cells = <1>;
+		status = "disabled";
+	};
+
+	mfc: codec@13400000 {
+		compatible = "samsung,mfc-v5";
+		reg = <0x13400000 0x10000>;
+		interrupts = <0 94 0>;
+		power-domains = <&pd_mfc>;
+		clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
+		clock-names = "mfc", "sclk_mfc";
+		status = "disabled";
+	};
+
+	serial_0: serial@13800000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13800000 0x100>;
+		interrupts = <0 52 0>;
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	serial_1: serial@13810000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13810000 0x100>;
+		interrupts = <0 53 0>;
+		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	serial_2: serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	serial_3: serial@13830000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13830000 0x100>;
+		interrupts = <0 55 0>;
+		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+		clock-names = "uart", "clk_uart_baud0";
+		status = "disabled";
+	};
+
+	i2c_0: i2c@13860000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13860000 0x100>;
+		interrupts = <0 58 0>;
+		clocks = <&clock CLK_I2C0>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_bus>;
+		status = "disabled";
+	};
+
+	i2c_1: i2c@13870000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13870000 0x100>;
+		interrupts = <0 59 0>;
+		clocks = <&clock CLK_I2C1>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
+		status = "disabled";
+	};
+
+	i2c_2: i2c@13880000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13880000 0x100>;
+		interrupts = <0 60 0>;
+		clocks = <&clock CLK_I2C2>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
+		status = "disabled";
+	};
+
+	i2c_3: i2c@13890000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x13890000 0x100>;
+		interrupts = <0 61 0>;
+		clocks = <&clock CLK_I2C3>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_bus>;
+		status = "disabled";
+	};
+
+	i2c_4: i2c@138A0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138A0000 0x100>;
+		interrupts = <0 62 0>;
+		clocks = <&clock CLK_I2C4>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_bus>;
+		status = "disabled";
+	};
+
+	i2c_5: i2c@138B0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138B0000 0x100>;
+		interrupts = <0 63 0>;
+		clocks = <&clock CLK_I2C5>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_bus>;
+		status = "disabled";
+	};
+
+	i2c_6: i2c@138C0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138C0000 0x100>;
+		interrupts = <0 64 0>;
+		clocks = <&clock CLK_I2C6>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_bus>;
+		status = "disabled";
+	};
+
+	i2c_7: i2c@138D0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x138D0000 0x100>;
+		interrupts = <0 65 0>;
+		clocks = <&clock CLK_I2C7>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_bus>;
+		status = "disabled";
+	};
+
+	spi_0: spi@13920000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13920000 0x100>;
+		interrupts = <0 66 0>;
+		dmas = <&pdma0 7>, <&pdma0 6>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_bus>;
+		status = "disabled";
+	};
+
+	spi_1: spi@13930000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13930000 0x100>;
+		interrupts = <0 67 0>;
+		dmas = <&pdma1 7>, <&pdma1 6>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_bus>;
+		status = "disabled";
+	};
+
+	spi_2: spi@13940000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x13940000 0x100>;
+		interrupts = <0 68 0>;
+		dmas = <&pdma0 9>, <&pdma0 8>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_bus>;
+		status = "disabled";
+	};
+
+	pwm@139D0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x139D0000 0x1000>;
+		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
+		clocks = <&clock CLK_PWM>;
+		clock-names = "timers";
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		pdma0: pdma@12680000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12680000 0x1000>;
+			interrupts = <0 35 0>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@12690000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12690000 0x1000>;
+			interrupts = <0 36 0>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		mdma1: mdma@12850000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12850000 0x1000>;
+			interrupts = <0 34 0>;
+			clocks = <&clock CLK_MDMA>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+	};
+
+	fimd: fimd@11c00000 {
+		compatible = "samsung,exynos4210-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x11c00000 0x20000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <11 0>, <11 1>, <11 2>;
+		clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
+		clock-names = "sclk_fimd", "fimd";
+		power-domains = <&pd_lcd0>;
+		samsung,sysreg = <&sys_reg>;
+		status = "disabled";
+	};
+
+	ppmu_dmc0: ppmu_dmc0@106a0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x106a0000 0x2000>;
+		clocks = <&clock CLK_PPMUDMC0>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_dmc1: ppmu_dmc1@106b0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x106b0000 0x2000>;
+		clocks = <&clock CLK_PPMUDMC1>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_cpu: ppmu_cpu@106c0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x106c0000 0x2000>;
+		clocks = <&clock CLK_PPMUCPU>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_acp: ppmu_acp@10ae0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x106e0000 0x2000>;
+		status = "disabled";
+	};
+
+	ppmu_rightbus: ppmu_rightbus@112a0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x112a0000 0x2000>;
+		clocks = <&clock CLK_PPMURIGHT>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_leftbus: ppmu_leftbus0@116a0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x116a0000 0x2000>;
+		clocks = <&clock CLK_PPMULEFT>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_camif: ppmu_camif@11ac0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x11ac0000 0x2000>;
+		clocks = <&clock CLK_PPMUCAMIF>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_lcd0: ppmu_lcd0@11e40000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x11e40000 0x2000>;
+		clocks = <&clock CLK_PPMULCD0>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_fsys: ppmu_g3d@12630000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x12630000 0x2000>;
+		status = "disabled";
+	};
+
+	ppmu_image: ppmu_image@12aa0000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x12aa0000 0x2000>;
+		clocks = <&clock CLK_PPMUIMAGE>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_tv: ppmu_tv@12e40000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x12e40000 0x2000>;
+		clocks = <&clock CLK_PPMUTV>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_g3d: ppmu_g3d@13220000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x13220000 0x2000>;
+		clocks = <&clock CLK_PPMUG3D>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_mfc_left: ppmu_mfc_left@13660000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x13660000 0x2000>;
+		clocks = <&clock CLK_PPMUMFC_L>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+
+	ppmu_mfc_right: ppmu_mfc_right@13670000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x13670000 0x2000>;
+		clocks = <&clock CLK_PPMUMFC_R>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+};
diff --git a/src/arm/exynos4210-origen.dts b/src/arm/exynos4210-origen.dts
new file mode 100644
index 000000000000..b81146141402
--- /dev/null
+++ b/src/arm/exynos4210-origen.dts
@@ -0,0 +1,337 @@
+/*
+ * Samsung's Exynos4210 based Origen board device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Insignal Origen evaluation board based on Exynos4210";
+	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
+
+	memory {
+		reg = <0x40000000 0x10000000
+		       0x50000000 0x10000000
+		       0x60000000 0x10000000
+		       0x70000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+		stdout-path = &serial_2;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mmc_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 0>;
+			enable-active-high;
+		};
+	};
+
+	watchdog@10060000 {
+		status = "okay";
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	tmu@100C0000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+		pinctrl-names = "default";
+		vmmc-supply = <&mmc_reg>;
+		status = "okay";
+	};
+
+	sdhci@12510000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
+		pinctrl-names = "default";
+		vmmc-supply = <&mmc_reg>;
+		status = "okay";
+	};
+
+	g2d@12800000 {
+		status = "okay";
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	i2c@13860000 {
+		status = "okay";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+
+		max8997_pmic@66 {
+			compatible = "maxim,max8997-pmic";
+			reg = <0x66>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <4 0>, <3 0>;
+
+			max8997,pmic-buck1-dvs-voltage = <1350000>;
+			max8997,pmic-buck2-dvs-voltage = <1100000>;
+			max8997,pmic-buck5-dvs-voltage = <1200000>;
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "VDD_ABB_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "VDD_ALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VMIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VDD_RTC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VDD_AUD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt	= <1800000>;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt	= <3300000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "DVDD_SWB_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt	= <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VDD_PLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt	= <1100000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "VDD_AUD_3V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt	= <3000000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "AVDD18_SWB_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VDD_SWB_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt	= <3300000>;
+					regulator-always-on;
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "VDD_MIF_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt	= <1200000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					/*
+					* HACK: The real name is VDD_ARM_1.2V,
+					* but exynos-cpufreq does not support
+					* DT-based regulator lookup yet.
+					*/
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt	= <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VDD_INT_1.1V";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt	= <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VDD_G3D_1.1V";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "VDDQ_M1M2_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "VDD_LCD_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		up {
+			label = "Up";
+			gpios = <&gpx2 0 1>;
+			linux,code = <KEY_UP>;
+			gpio-key,wakeup;
+		};
+
+		down {
+			label = "Down";
+			gpios = <&gpx2 1 1>;
+			linux,code = <KEY_DOWN>;
+			gpio-key,wakeup;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpx1 7 1>;
+			linux,code = <KEY_BACK>;
+			gpio-key,wakeup;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpx1 6 1>;
+			linux,code = <KEY_HOME>;
+			gpio-key,wakeup;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpx1 5 1>;
+			linux,code = <KEY_MENU>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status {
+			gpios = <&gpx1 3 1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	fimd@11c00000 {
+		pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <47500000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <64>;
+			hback-porch = <16>;
+			hsync-len = <48>;
+			vback-porch = <64>;
+			vfront-porch = <16>;
+			vsync-len = <3>;
+		};
+	};
+};
diff --git a/src/arm/exynos4210-pinctrl.dtsi b/src/arm/exynos4210-pinctrl.dtsi
new file mode 100644
index 000000000000..a7c212891674
--- /dev/null
+++ b/src/arm/exynos4210-pinctrl.dtsi
@@ -0,0 +1,847 @@
+/*
+ * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2011-2012 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb: gpb {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe2: gpe2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe3: gpe3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe4: gpe4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf2: gpf2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf3: gpf3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa0-4", "gpa0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_fctl: uart2-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_a: uart-audio-a {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_bus: i2c3-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart3_data: uart3-data {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_b: uart-audio-b {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_bus: i2c4-bus {
+			samsung,pins = "gpb-2", "gpb-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_bus: i2c5-bus {
+			samsung,pins = "gpb-6", "gpb-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		ac97_bus: ac97-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s2_bus: i2s2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm2_bus: pcm2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif_bus: spdif-bus {
+			samsung,pins = "gpc1-0", "gpc1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_bus: i2c6-bus {
+			samsung,pins = "gpc1-3", "gpc1-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+			samsung,pin-function = <5>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_bus: i2c7-bus {
+			samsung,pins = "gpd0-2", "gpd0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_bus: i2c0-bus {
+			samsung,pins = "gpd1-0", "gpd1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_bus: i2c1-bus {
+			samsung,pins = "gpd1-2", "gpd1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm0_out: pwm0-out {
+			samsung,pins = "gpd0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm1_out: pwm1-out {
+			samsung,pins = "gpd0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm2_out: pwm2-out {
+			samsung,pins = "gpd0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm3_out: pwm3-out {
+			samsung,pins = "gpd0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_ctrl: lcd-ctrl {
+			samsung,pins = "gpd0-0", "gpd0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_sync: lcd-sync {
+			samsung,pins = "gpf0-0", "gpf0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_en: lcd-en {
+			samsung,pins = "gpe3-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_clk: lcd-clk {
+			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data16: lcd-data-width16 {
+			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data18: lcd-data-width18 {
+			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+					"gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data24: lcd-data-width24 {
+			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@11000000 {
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk1: gpk1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk2: gpk2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk3: gpk3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl0: gpl0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl1: gpl1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl2: gpl2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_clk: sd4-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_cmd: sd4-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_cd: sd4-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus1: sd4-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus4: sd4-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus8: sd4-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <4>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpk1-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpk1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpk1-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpk1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpk2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpk2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpk2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpk2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus8: sd2-bus-width8 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_clk: sd3-clk {
+			samsung,pins = "gpk3-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cmd: sd3-cmd {
+			samsung,pins = "gpk3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cd: sd3-cd {
+			samsung,pins = "gpk3-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus1: sd3-bus-width1 {
+			samsung,pins = "gpk3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus4: sd3-bus-width4 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		eint0: ext-int0 {
+			samsung,pins = "gpx0-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint8: ext-int8 {
+			samsung,pins = "gpx1-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint15: ext-int15 {
+			samsung,pins = "gpx1-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint16: ext-int16 {
+			samsung,pins = "gpx2-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint31: ext-int31 {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a_io: cam-port-a-io {
+			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a_clk_active: cam-port-a-clk-active {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_a_clk_idle: cam-port-a-clk-idle {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		i2s0_bus: i2s0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4", "gpz-5", "gpz-6";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm0_bus: pcm0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4";
+			samsung,pin-function = <0x3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+};
diff --git a/src/arm/exynos4210-smdkv310.dts b/src/arm/exynos4210-smdkv310.dts
new file mode 100644
index 000000000000..86216fff1b4f
--- /dev/null
+++ b/src/arm/exynos4210-smdkv310.dts
@@ -0,0 +1,210 @@
+/*
+ * Samsung's Exynos4210 based SMDKV310 board device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Device tree source file for Samsung's SMDKV310 board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+
+/ {
+	model = "Samsung smdkv310 evaluation board based on Exynos4210";
+	compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+		stdout-path = &serial_1;
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		status = "okay";
+	};
+
+	g2d@12800000 {
+		status = "okay";
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	pinctrl@11000000 {
+		keypad_rows: keypad-rows {
+			samsung,pins = "gpx2-0", "gpx2-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_cols: keypad-cols {
+			samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+				       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	keypad@100A0000 {
+		samsung,keypad-num-rows = <2>;
+		samsung,keypad-num-columns = <8>;
+		linux,keypad-no-autorepeat;
+		linux,keypad-wakeup;
+		pinctrl-names = "default";
+		pinctrl-0 = <&keypad_rows &keypad_cols>;
+		status = "okay";
+
+		key_1 {
+			keypad,row = <0>;
+			keypad,column = <3>;
+			linux,code = <2>;
+		};
+
+		key_2 {
+			keypad,row = <0>;
+			keypad,column = <4>;
+			linux,code = <3>;
+		};
+
+		key_3 {
+			keypad,row = <0>;
+			keypad,column = <5>;
+			linux,code = <4>;
+		};
+
+		key_4 {
+			keypad,row = <0>;
+			keypad,column = <6>;
+			linux,code = <5>;
+		};
+
+		key_5 {
+			keypad,row = <0>;
+			keypad,column = <7>;
+			linux,code = <6>;
+		};
+
+		key_a {
+			keypad,row = <1>;
+			keypad,column = <3>;
+			linux,code = <30>;
+		};
+
+		key_b {
+			keypad,row = <1>;
+			keypad,column = <4>;
+			linux,code = <48>;
+		};
+
+		key_c {
+			keypad,row = <1>;
+			keypad,column = <5>;
+			linux,code = <46>;
+		};
+
+		key_d {
+			keypad,row = <1>;
+			keypad,column = <6>;
+			linux,code = <32>;
+		};
+
+		key_e {
+			keypad,row = <1>;
+			keypad,column = <7>;
+			linux,code = <18>;
+		};
+	};
+
+	i2c@13860000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <100000>;
+		status = "okay";
+
+		eeprom@50 {
+			compatible = "samsung,24ad0xd1";
+			reg = <0x50>;
+		};
+
+		eeprom@52 {
+			compatible = "samsung,24ad0xd1";
+			reg = <0x52>;
+		};
+	};
+
+	spi_2: spi@13940000 {
+		cs-gpios = <&gpc1 2 0>;
+		status = "okay";
+
+		w25x80@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "w25x80";
+			reg = <0>;
+			spi-max-frequency = <1000000>;
+
+			controller-data {
+				samsung,spi-feedback-delay = <0>;
+			};
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "Kernel";
+				reg = <0x40000 0xc0000>;
+			};
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <12000000>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
diff --git a/src/arm/exynos4210-trats.dts b/src/arm/exynos4210-trats.dts
new file mode 100644
index 000000000000..3d6652a4b6cb
--- /dev/null
+++ b/src/arm/exynos4210-trats.dts
@@ -0,0 +1,466 @@
+/*
+ * Samsung's Exynos4210 based Trats board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+
+/ {
+	model = "Samsung Trats based on Exynos4210";
+	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
+
+	memory {
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000
+			0x60000000 0x10000000
+			0x70000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+		stdout-path = &serial_2;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		vemmc_reg: regulator-0 {
+			compatible = "regulator-fixed";
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpk0 2 0>;
+			enable-active-high;
+		};
+
+		tsp_reg: regulator-1 {
+			compatible = "regulator-fixed";
+			regulator-name = "TSP_FIXED_VOLTAGES";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpl0 3 0>;
+			enable-active-high;
+		};
+
+		cam_af_28v_reg: regulator-2 {
+			compatible = "regulator-fixed";
+			regulator-name = "8M_AF_2.8V_EN";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpk1 1 0>;
+			enable-active-high;
+		};
+
+		cam_io_en_reg: regulator-3 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_IO_EN";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpe2 1 0>;
+			enable-active-high;
+		};
+
+		cam_io_12v_reg: regulator-4 {
+			compatible = "regulator-fixed";
+			regulator-name = "8M_1.2V_EN";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&gpe2 5 0>;
+			enable-active-high;
+		};
+
+		vt_core_15v_reg: regulator-5 {
+			compatible = "regulator-fixed";
+			regulator-name = "VT_CORE_1.5V";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&gpe2 2 0>;
+			enable-active-high;
+		};
+	};
+
+	hsotg@12480000 {
+		vusb_d-supply = <&vusb_reg>;
+		vusb_a-supply = <&vusbdac_reg>;
+		dr_mode = "peripheral";
+		status = "okay";
+	};
+
+	sdhci_emmc: sdhci@12510000 {
+		bus-width = <8>;
+		non-removable;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+		pinctrl-names = "default";
+		vmmc-supply = <&vemmc_reg>;
+		status = "okay";
+	};
+
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-down-key {
+			gpios = <&gpx2 1 1>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		vol-up-key {
+			gpios = <&gpx2 0 1>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		power-key {
+			gpios = <&gpx2 7 1>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+
+		ok-key {
+			gpios = <&gpx3 5 1>;
+			linux,code = <352>;
+			label = "ok";
+			debounce-interval = <10>;
+		};
+	};
+
+	i2c@13890000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <400000>;
+		pinctrl-0 = <&i2c3_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		mms114-touchscreen@48 {
+			compatible = "melfas,mms114";
+			reg = <0x48>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <4 2>;
+			x-size = <720>;
+			y-size = <1280>;
+			avdd-supply = <&tsp_reg>;
+			vdd-supply = <&tsp_reg>;
+		};
+	};
+
+	i2c@138B0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c5_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		max8997_pmic@66 {
+			compatible = "maxim,max8997-pmic";
+
+			reg = <0x66>;
+
+			max8997,pmic-buck1-uses-gpio-dvs;
+			max8997,pmic-buck2-uses-gpio-dvs;
+			max8997,pmic-buck5-uses-gpio-dvs;
+
+			max8997,pmic-ignore-gpiodvs-side-effect;
+			max8997,pmic-buck125-default-dvs-idx = <0>;
+
+			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
+						         <&gpx0 6 0>,
+							 <&gpl0 0 0>;
+
+			max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+							 <1250000>, <1200000>,
+							 <1150000>, <1100000>,
+							 <1000000>, <950000>;
+
+			max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+							 <950000>,  <900000>,
+							 <1100000>, <1000000>,
+							 <950000>,  <900000>;
+
+			max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>;
+
+			regulators {
+				valive_reg: LDO2 {
+				     regulator-name = "VALIVE_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				vusb_reg: LDO3 {
+				     regulator-name = "VUSB_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				};
+
+				vmipi_reg: LDO4 {
+				     regulator-name = "VMIPI_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vpda_reg: LDO6 {
+				     regulator-name = "VCC_1.8V_PDA";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				     regulator-always-on;
+				};
+
+				vcam_reg: LDO7 {
+				     regulator-name = "CAM_ISP_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vusbdac_reg: LDO8 {
+				     regulator-name = "VUSB/VDAC_3.3V_C210";
+				     regulator-min-microvolt = <3300000>;
+				     regulator-max-microvolt = <3300000>;
+				};
+
+				vccpda_reg: LDO9 {
+				     regulator-name = "VCC_2.8V_PDA";
+				     regulator-min-microvolt = <2800000>;
+				     regulator-max-microvolt = <2800000>;
+				     regulator-always-on;
+				};
+
+				vpll_reg: LDO10 {
+				     regulator-name = "VPLL_1.1V_C210";
+				     regulator-min-microvolt = <1100000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				vtcam_reg: LDO12 {
+				     regulator-name = "VT_CAM_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vcclcd_reg: LDO13 {
+				     regulator-name = "VCC_3.3V_LCD";
+				     regulator-min-microvolt = <3300000>;
+				     regulator-max-microvolt = <3300000>;
+				};
+
+				vlcd_reg: LDO15 {
+				     regulator-name = "VLCD_2.2V";
+				     regulator-min-microvolt = <2200000>;
+				     regulator-max-microvolt = <2200000>;
+				};
+
+				camsensor_reg: LDO16 {
+				     regulator-name = "CAM_SENSOR_IO_1.8V";
+				     regulator-min-microvolt = <1800000>;
+				     regulator-max-microvolt = <1800000>;
+				};
+
+				vddq_reg: LDO21 {
+				     regulator-name = "VDDQ_M1M2_1.2V";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				     regulator-always-on;
+				};
+
+				varm_breg: BUCK1 {
+				     /*
+				      * HACK: The real name is VARM_1.2V_C210,
+				      * but exynos-cpufreq does not support
+				      * DT-based regulator lookup yet.
+				      */
+				     regulator-name = "vdd_arm";
+				     regulator-min-microvolt = <900000>;
+				     regulator-max-microvolt = <1350000>;
+				     regulator-always-on;
+				};
+
+				vint_breg: BUCK2 {
+				     regulator-name = "VINT_1.1V_C210";
+				     regulator-min-microvolt = <900000>;
+				     regulator-max-microvolt = <1100000>;
+				     regulator-always-on;
+				};
+
+				camisp_breg: BUCK4 {
+				     regulator-name = "CAM_ISP_CORE_1.2V";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				};
+
+				vmem_breg: BUCK5 {
+				     regulator-name = "VMEM_1.2V_C210";
+				     regulator-min-microvolt = <1200000>;
+				     regulator-max-microvolt = <1200000>;
+				     regulator-always-on;
+				};
+
+				vccsub_breg: BUCK7 {
+				     regulator-name = "VCC_SUB_2.0V";
+				     regulator-min-microvolt = <2000000>;
+				     regulator-max-microvolt = <2000000>;
+				     regulator-always-on;
+				};
+
+				safe1_sreg: ESAFEOUT1 {
+				     regulator-name = "SAFEOUT1";
+				     regulator-always-on;
+				};
+
+				safe2_sreg: ESAFEOUT2 {
+				     regulator-name = "SAFEOUT2";
+				     regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	dsi_0: dsi@11C80000 {
+		vddcore-supply = <&vusb_reg>;
+		vddio-supply = <&vmipi_reg>;
+		samsung,pll-clock-frequency = <24000000>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				dsi_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+					samsung,burst-clock-frequency = <500000000>;
+					samsung,esc-clock-frequency = <20000000>;
+				};
+			};
+		};
+
+		panel@0 {
+			reg = <0>;
+			compatible = "samsung,s6e8aa0";
+			vdd3-supply = <&vcclcd_reg>;
+			vci-supply = <&vlcd_reg>;
+			reset-gpios = <&gpy4 5 0>;
+			power-on-delay= <50>;
+			reset-delay = <100>;
+			init-delay = <100>;
+			flip-horizontal;
+			flip-vertical;
+			panel-width-mm = <58>;
+			panel-height-mm = <103>;
+
+			display-timings {
+				timing-0 {
+					clock-frequency = <57153600>;
+					hactive = <720>;
+					vactive = <1280>;
+					hfront-porch = <5>;
+					hback-porch = <5>;
+					hsync-len = <5>;
+					vfront-porch = <13>;
+					vback-porch = <1>;
+					vsync-len = <2>;
+				};
+			};
+
+			port {
+				dsi_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
+	fimd@11c00000 {
+		status = "okay";
+	};
+
+	camera {
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+		status = "okay";
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+					<&clock CLK_SCLK_FIMC0>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+					<&clock CLK_SCLK_FIMC1>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+					<&clock CLK_SCLK_FIMC2>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+					<&clock CLK_SCLK_FIMC3>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+	};
+};
diff --git a/src/arm/exynos4210-universal_c210.dts b/src/arm/exynos4210-universal_c210.dts
new file mode 100644
index 000000000000..b57e6b82ea20
--- /dev/null
+++ b/src/arm/exynos4210-universal_c210.dts
@@ -0,0 +1,512 @@
+/*
+ * Samsung's Exynos4210 based Universal C210 board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Universal C210 board which is based on
+ * Samsung's Exynos4210 rev0 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+
+/ {
+	model = "Samsung Universal C210 based on Exynos4210 rev0";
+	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
+
+	memory {
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
+		stdout-path = &serial_2;
+	};
+
+	sysram@02020000 {
+		smp-sysram@0 {
+			status = "disabled";
+		};
+
+		smp-sysram@5000 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x5000 0x1000>;
+		};
+
+		smp-sysram@1f000 {
+			status = "disabled";
+		};
+	};
+
+	mct@10050000 {
+		compatible = "none";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	vemmc_reg: voltage-regulator {
+	        compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2_8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe1 3 0>;
+		enable-active-high;
+	};
+
+	hsotg@12480000 {
+		vusb_d-supply = <&ldo3_reg>;
+		vusb_a-supply = <&ldo8_reg>;
+		dr_mode = "peripheral";
+		status = "okay";
+	};
+
+	sdhci_emmc: sdhci@12510000 {
+		bus-width = <8>;
+		non-removable;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+		pinctrl-names = "default";
+		vmmc-supply = <&vemmc_reg>;
+		status = "okay";
+	};
+
+	sdhci_sd: sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+		pinctrl-names = "default";
+		vmmc-supply = <&ldo5_reg>;
+		cd-gpios = <&gpx3 4 0>;
+		cd-inverted;
+		status = "okay";
+	};
+
+	ehci@12580000 {
+		status = "okay";
+		port@0 {
+			status = "okay";
+		};
+	};
+
+	ohci@12590000 {
+		status = "okay";
+		port@0 {
+			status = "okay";
+		};
+	};
+
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-up-key {
+			gpios = <&gpx2 0 1>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <1>;
+		};
+
+		vol-down-key {
+			gpios = <&gpx2 1 1>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <1>;
+		};
+
+		config-key {
+			gpios = <&gpx2 2 1>;
+			linux,code = <171>;
+			label = "config";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+
+		camera-key {
+			gpios = <&gpx2 3 1>;
+			linux,code = <212>;
+			label = "camera";
+			debounce-interval = <1>;
+		};
+
+		power-key {
+			gpios = <&gpx2 7 1>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+
+		ok-key {
+			gpios = <&gpx3 5 1>;
+			linux,code = <352>;
+			label = "ok";
+			debounce-interval = <1>;
+		};
+	};
+
+	tsp_reg: voltage-regulator {
+	        compatible = "regulator-fixed";
+		regulator-name = "TSP_2_8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 3 0>;
+		enable-active-high;
+	};
+
+	i2c@13890000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c3_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		tsp@4a {
+			/* TBD: Atmel maXtouch touchscreen */
+			reg = <0x4a>;
+		};
+	};
+
+	i2c@138B0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c5_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		vdd_arm_reg: pmic@60 {
+			compatible = "maxim,max8952";
+			reg = <0x60>;
+
+			max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
+			max8952,default-mode = <0>;
+			max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+							<1050000>, <950000>;
+			max8952,sync-freq = <0>;
+			max8952,ramp-speed = <0>;
+
+			regulator-name = "vdd_arm";
+			regulator-min-microvolt = <770000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pmic@66 {
+			compatible = "national,lp3974";
+			reg = <0x66>;
+
+			max8998,pmic-buck1-default-dvs-idx = <0>;
+			max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
+							<&gpx0 6 0>;
+			max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
+							<1100000>, <1000000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
+			max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "LDO6";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VLCD+VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "PS_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VHIC_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "CAM_I_HOST_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "CAM_S_ANA_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VCC_3.0V_LCD";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VINT_1.1V";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VG3D_1.1V";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "VMEM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ap32khz_reg: EN32KHz-AP {
+					regulator-name = "32KHz AP";
+					regulator-always-on;
+				};
+
+				cp32khz_reg: EN32KHz-CP {
+					regulator-name = "32KHz CP";
+				};
+
+				vichg_reg: ENVICHG {
+					regulator-name = "VICHG";
+				};
+
+				safeout1_reg: ESAFEOUT1 {
+					regulator-name = "SAFEOUT1";
+					regulator-always-on;
+				};
+
+				safeout2_reg: ESAFEOUT2 {
+					regulator-name = "SAFEOUT2";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	spi-lcd {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpy3 1 0>;
+		gpio-mosi = <&gpy3 3 0>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpy4 3 0>;
+
+		lcd@0 {
+			compatible = "samsung,ld9040";
+			reg = <0>;
+			vdd3-supply = <&ldo7_reg>;
+			vci-supply = <&ldo17_reg>;
+			reset-gpios = <&gpy4 5 0>;
+			spi-max-frequency = <1200000>;
+			spi-cpol;
+			spi-cpha;
+			power-on-delay = <10>;
+			reset-delay = <10>;
+			panel-width-mm = <90>;
+			panel-height-mm = <154>;
+			display-timings {
+				timing {
+					clock-frequency = <23492370>;
+					hactive = <480>;
+					vactive = <800>;
+					hback-porch = <16>;
+					hfront-porch = <16>;
+					vback-porch = <2>;
+					vfront-porch = <28>;
+					hsync-len = <2>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <0>;
+					pixelclk-active = <0>;
+				};
+			};
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_dpi_ep>;
+				};
+			};
+		};
+	};
+
+	fimd: fimd@11c00000 {
+		pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+		pinctrl-names = "default";
+		status = "okay";
+		samsung,invert-vden;
+		samsung,invert-vclk;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@3 {
+			reg = <3>;
+			fimd_dpi_ep: endpoint {
+				remote-endpoint = <&lcd_ep>;
+			};
+		};
+	};
+
+	pwm@139D0000 {
+		compatible = "samsung,s5p6440-pwm";
+		status = "okay";
+	};
+
+	camera {
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+					<&clock CLK_SCLK_FIMC0>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+					<&clock CLK_SCLK_FIMC1>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+					<&clock CLK_SCLK_FIMC2>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+					<&clock CLK_SCLK_FIMC3>;
+			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+			assigned-clock-rates = <0>, <160000000>;
+		};
+	};
+};
+
+&mdma1 {
+	reg = <0x12840000 0x1000>;
+};
diff --git a/src/arm/exynos4210.dtsi b/src/arm/exynos4210.dtsi
new file mode 100644
index 000000000000..67c832c9dcf1
--- /dev/null
+++ b/src/arm/exynos4210.dtsi
@@ -0,0 +1,213 @@
+/*
+ * Samsung's Exynos4210 SoC device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "exynos4.dtsi"
+#include "exynos4210-pinctrl.dtsi"
+
+/ {
+	compatible = "samsung,exynos4210", "samsung,exynos4";
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@900 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x900>;
+		};
+
+		cpu@901 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x901>;
+		};
+	};
+
+	pmu_system_controller: system-controller@10020000 {
+		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+				"clkout4", "clkout8", "clkout9";
+		clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+			<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+			<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
+			<&clock CLK_XUSBXTI>;
+		#clock-cells = <1>;
+	};
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x20000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@1f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x1f000 0x1000>;
+		};
+	};
+
+	pd_lcd1: lcd1-power-domain@10023CA0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CA0 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	l2c: l2-cache-controller@10502000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x10502000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+		arm,tag-latency = <2 2 1>;
+		arm,data-latency = <2 2 1>;
+	};
+
+	gic: interrupt-controller@10490000 {
+		cpu-offset = <0x8000>;
+	};
+
+	combiner: interrupt-controller@10440000 {
+		samsung,combiner-nr = <16>;
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &gic 0 57 0>,
+					<1 &gic 0 69 0>,
+					<2 &combiner 12 6>,
+					<3 &combiner 12 7>,
+					<4 &gic 0 42 0>,
+					<5 &gic 0 48 0>;
+		};
+	};
+
+	clock: clock-controller@10030000 {
+		compatible = "samsung,exynos4210-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,exynos4210-pinctrl";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 47 0>;
+	};
+
+	pinctrl_1: pinctrl@11000000 {
+		compatible = "samsung,exynos4210-pinctrl";
+		reg = <0x11000000 0x1000>;
+		interrupts = <0 46 0>;
+
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_2: pinctrl@03860000 {
+		compatible = "samsung,exynos4210-pinctrl";
+		reg = <0x03860000 0x1000>;
+	};
+
+	tmu@100C0000 {
+		compatible = "samsung,exynos4210-tmu";
+		interrupt-parent = <&combiner>;
+		reg = <0x100C0000 0x100>;
+		interrupts = <2 4>;
+		clocks = <&clock CLK_TMU_APBIF>;
+		clock-names = "tmu_apbif";
+		status = "disabled";
+	};
+
+	g2d@12800000 {
+		compatible = "samsung,s5pv210-g2d";
+		reg = <0x12800000 0x1000>;
+		interrupts = <0 89 0>;
+		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
+		clock-names = "sclk_fimg2d", "fimg2d";
+		status = "disabled";
+	};
+
+	camera {
+		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+		fimc_0: fimc@11800000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,cam-if;
+		};
+
+		fimc_1: fimc@11810000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,cam-if;
+		};
+
+		fimc_2: fimc@11820000 {
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,lcd-wb;
+		};
+
+		fimc_3: fimc@11830000 {
+			samsung,pix-limits = <1920 8192 1366 1920>;
+			samsung,rotators = <0>;
+			samsung,mainscaler-ext;
+			samsung,lcd-wb;
+		};
+	};
+
+	ppmu_lcd1: ppmu_lcd1@12240000 {
+		compatible = "samsung,exynos-ppmu";
+		reg = <0x12240000 0x2000>;
+		clocks = <&clock CLK_PPMULCD1>;
+		clock-names = "ppmu";
+		status = "disabled";
+	};
+};
diff --git a/src/arm/exynos4212.dtsi b/src/arm/exynos4212.dtsi
new file mode 100644
index 000000000000..dd0a43ec56da
--- /dev/null
+++ b/src/arm/exynos4212.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Samsung's Exynos4212 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "exynos4x12.dtsi"
+
+/ {
+	compatible = "samsung,exynos4212", "samsung,exynos4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@A00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA00>;
+		};
+
+		cpu@A01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA01>;
+		};
+	};
+
+	combiner: interrupt-controller@10440000 {
+		samsung,combiner-nr = <18>;
+	};
+
+	gic: interrupt-controller@10490000 {
+		cpu-offset = <0x8000>;
+	};
+};
diff --git a/src/arm/exynos4412-odroid-common.dtsi b/src/arm/exynos4412-odroid-common.dtsi
new file mode 100644
index 000000000000..de80b5bba204
--- /dev/null
+++ b/src/arm/exynos4412-odroid-common.dtsi
@@ -0,0 +1,428 @@
+/*
+ * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
+ * device tree source
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/sound/samsung-i2s.h>
+#include <dt-bindings/input/input.h>
+#include "exynos4412.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &serial_1;
+	};
+
+	firmware@0204F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204F000 0x1000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_power_key>;
+
+		power_key {
+			interrupt-parent = <&gpx1>;
+			interrupts = <3 0>;
+			gpios = <&gpx1 3 1>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2s0: i2s@03830000 {
+		pinctrl-0 = <&i2s0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+		clocks = <&clock_audss EXYNOS_I2S_BUS>,
+			 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+			 <&clock_audss EXYNOS_SCLK_I2S>;
+		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+				<&clock_audss EXYNOS_MOUT_I2S>,
+				<&clock_audss EXYNOS_DOUT_SRP>,
+				<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+				<&clock_audss EXYNOS_MOUT_AUDSS>;
+		assigned-clock-rates = <0>,
+				<0>,
+				<192000000>,
+				<19200000>;
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+			system-clock-frequency = <19200000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&max98090>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+		};
+	};
+
+	mmc@12550000 {
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		vmmc-supply = <&ldo20_reg &buck8_reg>;
+		status = "okay";
+
+		num-slots = <1>;
+		broken-cd;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+	};
+
+	watchdog@10060000 {
+		status = "okay";
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	g2d@10800000 {
+		status = "okay";
+	};
+
+	camera {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <>;
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+					<&clock CLK_SCLK_FIMC0>;
+			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+			assigned-clock-rates = <0>, <176000000>;
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+					<&clock CLK_SCLK_FIMC1>;
+			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+			assigned-clock-rates = <0>, <176000000>;
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+					<&clock CLK_SCLK_FIMC2>;
+			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+			assigned-clock-rates = <0>, <176000000>;
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+					<&clock CLK_SCLK_FIMC3>;
+			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+			assigned-clock-rates = <0>, <176000000>;
+		};
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		pinctrl-names = "default";
+		vmmc-supply = <&ldo4_reg &ldo21_reg>;
+		cd-gpios = <&gpk2 2 0>;
+		cd-inverted;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	i2c@13860000 {
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <400000>;
+		status = "okay";
+
+		usb3503: usb3503@08 {
+			compatible = "smsc,usb3503";
+			reg = <0x08>;
+
+			intn-gpios = <&gpx3 0 0>;
+			connect-gpios = <&gpx3 4 0>;
+			reset-gpios = <&gpx3 5 0>;
+			initial-mode = <1>;
+		};
+
+		max77686: pmic@09 {
+			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77686_irq>;
+			reg = <0x09>;
+			#clock-cells = <1>;
+
+			voltage-regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "VDD_ALIVE_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "VDDQ_M1_2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VDDQ_EXT_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VDDQ_MMC2_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VDDQ_MMC1_3_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VDD10_MPLL_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VDD10_XPLL_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "VDD18_ABB1_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "VDD33_USB_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VDDQ_C2C_W_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VDD18_ABB0_2_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "VDD10_HSIC_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VDD18_HSIC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo20_reg: LDO20 {
+					regulator-name = "LDO20_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "LDO21_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo25_reg: LDO25 {
+					regulator-name = "VDDQ_LCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-microvolt-offset = <50000>;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "VDDQ_CKEM1_2_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "BUCK6_1.35V";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "BUCK7_2.0V";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "BUCK8_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+			};
+		};
+	};
+
+	i2c@13870000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
+		status = "okay";
+		max98090: max98090@10 {
+			compatible = "maxim,max98090";
+			reg = <0x10>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <0 0>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+			clock-names = "mclk";
+			#sound-dai-cells = <0>;
+		};
+	};
+
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
+	hsotg@12480000 {
+		dr_mode = "peripheral";
+		status = "okay";
+		vusb_d-supply = <&ldo15_reg>;
+		vusb_a-supply = <&ldo12_reg>;
+	};
+
+	ehci: ehci@12580000 {
+		status = "okay";
+	};
+};
+
+&pinctrl_1 {
+	gpio_power_key: power_key {
+		samsung,pins = "gpx1-3";
+		samsung,pin-pud = <0>;
+	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/src/arm/exynos4412-odroidu3.dts b/src/arm/exynos4412-odroidu3.dts
new file mode 100644
index 000000000000..44684e57ead1
--- /dev/null
+++ b/src/arm/exynos4412-odroidu3.dts
@@ -0,0 +1,63 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-U3 board device tree source
+ *
+ * Copyright (c) 2014 Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-U3 board which is based
+ * on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412-odroid-common.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-U3 board based on Exynos4412";
+	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
+
+	memory {
+		reg = <0x40000000 0x7FF00000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 1>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&usb3503 {
+	clock-names = "refclk";
+	clocks = <&pmu_system_controller 0>;
+	refclk-frequency = <24000000>;
+};
+
+&ehci {
+	port@1 {
+		status = "okay";
+	};
+	port@2 {
+		status = "okay";
+	};
+};
+
+&sound {
+	simple-audio-card,name = "Odroid-U3";
+	simple-audio-card,widgets =
+		"Headphone", "Headphone Jack",
+		"Speakers", "Speakers";
+	simple-audio-card,routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"Headphone Jack", "MICBIAS",
+		"IN1", "Headphone Jack",
+		"Speakers", "SPKL",
+		"Speakers", "SPKR";
+};
diff --git a/src/arm/exynos4412-odroidx.dts b/src/arm/exynos4412-odroidx.dts
new file mode 100644
index 000000000000..cb1cfe7239c4
--- /dev/null
+++ b/src/arm/exynos4412-odroidx.dts
@@ -0,0 +1,85 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based
+ * on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412-odroid-common.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-X board based on Exynos4412";
+	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
+
+	memory {
+		reg = <0x40000000 0x3FF00000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 1>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led2 {
+			label = "led2:mmc0";
+			gpios = <&gpc1 2 1>;
+			default-state = "on";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	gpio_keys {
+		pinctrl-0 = <&gpio_power_key &gpio_home_key>;
+
+		home_key {
+			interrupt-parent = <&gpx2>;
+			interrupts = <2 0>;
+			gpios = <&gpx2 2 0>;
+			linux,code = <KEY_HOME>;
+			label = "home key";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	regulator_p3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpa1 1 1>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&ehci {
+	port@1 {
+		status = "okay";
+	};
+};
+
+&pinctrl_1 {
+	gpio_home_key: home_key {
+		samsung,pins = "gpx2-2";
+		samsung,pin-pud = <0>;
+	};
+};
diff --git a/src/arm/exynos4412-odroidx2.dts b/src/arm/exynos4412-odroidx2.dts
new file mode 100644
index 000000000000..6e33678562ae
--- /dev/null
+++ b/src/arm/exynos4412-odroidx2.dts
@@ -0,0 +1,36 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-X2 board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X2 board which is based
+ * on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "exynos4412-odroidx.dts"
+
+/ {
+	model = "Hardkernel ODROID-X2 board based on Exynos4412";
+	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
+
+	memory {
+		reg = <0x40000000 0x7FF00000>;
+	};
+};
+
+&sound {
+	simple-audio-card,name = "Odroid-X2";
+	simple-audio-card,widgets =
+		"Headphone", "Headphone Jack",
+		"Microphone", "Mic Jack",
+		"Microphone", "DMIC";
+	simple-audio-card,routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"IN1", "Mic Jack",
+		"Mic Jack", "MICBIAS";
+};
diff --git a/src/arm/exynos4412-origen.dts b/src/arm/exynos4412-origen.dts
new file mode 100644
index 000000000000..bd8b73077d41
--- /dev/null
+++ b/src/arm/exynos4412-origen.dts
@@ -0,0 +1,534 @@
+/*
+ * Insignal's Exynos4412 based Origen board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Insignal Origen evaluation board based on Exynos4412";
+	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs ="console=ttySAC2,115200";
+		stdout-path = &serial_2;
+	};
+
+	firmware@0203F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0203F000 0x1000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mmc_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VMEM_VDD_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 0>;
+			enable-active-high;
+		};
+	};
+
+	watchdog@10060000 {
+		status = "okay";
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	pinctrl@11000000 {
+		keypad_rows: keypad-rows {
+			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_cols: keypad-cols {
+			samsung,pins = "gpx1-0", "gpx1-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	keypad@100A0000 {
+		samsung,keypad-num-rows = <3>;
+		samsung,keypad-num-columns = <2>;
+		linux,keypad-no-autorepeat;
+		linux,keypad-wakeup;
+		pinctrl-0 = <&keypad_rows &keypad_cols>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		key_home {
+			keypad,row = <0>;
+			keypad,column = <0>;
+			linux,code = <KEY_HOME>;
+		};
+
+		key_down {
+			keypad,row = <0>;
+			keypad,column = <1>;
+			linux,code = <KEY_DOWN>;
+		};
+
+		key_up {
+			keypad,row = <1>;
+			keypad,column = <0>;
+			linux,code = <KEY_UP>;
+		};
+
+		key_menu {
+			keypad,row = <1>;
+			keypad,column = <1>;
+			linux,code = <KEY_MENU>;
+		};
+
+		key_back {
+			keypad,row = <2>;
+			keypad,column = <0>;
+			linux,code = <KEY_BACK>;
+		};
+
+		key_enter {
+			keypad,row = <2>;
+			keypad,column = <1>;
+			linux,code = <KEY_ENTER>;
+		};
+	};
+
+	g2d@10800000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+		pinctrl-names = "default";
+		vmmc-supply = <&mmc_reg>;
+		status = "okay";
+	};
+
+	mmc@12550000 {
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		num-slots = <1>;
+		broken-cd;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
+	fimd@11c00000 {
+		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <47500000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <64>;
+			hback-porch = <16>;
+			hsync-len = <48>;
+			vback-porch = <64>;
+			vfront-porch = <16>;
+			vsync-len = <3>;
+		};
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	i2c@13860000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		s5m8767_pmic@66 {
+			compatible = "samsung,s5m8767-pmic";
+			reg = <0x66>;
+
+			s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+			s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
+							 <&gpx2 4 0>,
+							 <&gpx2 5 0>;
+
+			s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
+							<&gpm3 6 0>,
+							<&gpm3 7 0>;
+
+			s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>;
+
+			s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+							 <1100000>, <1100000>,
+							 <1100000>, <1100000>,
+							 <1100000>, <1100000>;
+
+			s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>;
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "VDD_ALIVE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "VDDQ_M12";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VDDIOAP_18";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VDDQ_PRE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VDD18_2M";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VDD10_MPLL";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VDD10_XPLL";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VDD10_MIPI";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VDD33_LCD";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VDD18_MIPI";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "VDD18_ABB1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "VDD33_UOTG";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VDDIOPERI_18";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VDD18_ABB02";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "VDD10_USH";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VDD18_HSIC";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VDDIOAP_MMC012_28";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo18_reg: LDO18 {
+					regulator-name = "VDDIOPERI_28";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "DVDD25";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo20_reg: LDO20 {
+					regulator-name = "VDD28_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "VDD28_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo22_reg: LDO22 {
+					regulator-name = "VDDA28_2M";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo23_reg: LDO23 {
+					regulator-name = "VDD28_TF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "VDD33_A31";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo25_reg: LDO25 {
+					regulator-name = "VDD18_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo26_reg: LDO26 {
+					regulator-name = "VDD18_A31";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo27_reg: LDO27 {
+					regulator-name = "GPS_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo28_reg: LDO28 {
+					regulator-name = "DVDD12";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt	= <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt	= <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt	= <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "vdd_m12";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "vdd12_5m";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "vddf28_emmc";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+			};
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
diff --git a/src/arm/exynos4412-smdk4412.dts b/src/arm/exynos4412-smdk4412.dts
new file mode 100644
index 000000000000..b9256afbcc68
--- /dev/null
+++ b/src/arm/exynos4412-smdk4412.dts
@@ -0,0 +1,162 @@
+/*
+ * Samsung's Exynos4412 based SMDK board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's SMDK4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+	model = "Samsung SMDK evaluation board based on Exynos4412";
+	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+		stdout-path = &serial_1;
+	};
+
+	g2d@10800000 {
+		status = "okay";
+	};
+
+	pinctrl@11000000 {
+		keypad_rows: keypad-rows {
+			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_cols: keypad-cols {
+			samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+				       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	keypad@100A0000 {
+		samsung,keypad-num-rows = <3>;
+		samsung,keypad-num-columns = <8>;
+		linux,keypad-no-autorepeat;
+		linux,keypad-wakeup;
+		pinctrl-0 = <&keypad_rows &keypad_cols>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		key_1 {
+			keypad,row = <1>;
+			keypad,column = <3>;
+			linux,code = <2>;
+		};
+
+		key_2 {
+			keypad,row = <1>;
+			keypad,column = <4>;
+			linux,code = <3>;
+		};
+
+		key_3 {
+			keypad,row = <1>;
+			keypad,column = <5>;
+			linux,code = <4>;
+		};
+
+		key_4 {
+			keypad,row = <1>;
+			keypad,column = <6>;
+			linux,code = <5>;
+		};
+
+		key_5 {
+			keypad,row = <1>;
+			keypad,column = <7>;
+			linux,code = <6>;
+		};
+
+		key_A {
+			keypad,row = <2>;
+			keypad,column = <6>;
+			linux,code = <30>;
+		};
+
+		key_B {
+			keypad,row = <2>;
+			keypad,column = <7>;
+			linux,code = <48>;
+		};
+
+		key_C {
+			keypad,row = <0>;
+			keypad,column = <5>;
+			linux,code = <46>;
+		};
+
+		key_D {
+			keypad,row = <2>;
+			keypad,column = <5>;
+			linux,code = <32>;
+		};
+
+		key_E {
+			keypad,row = <0>;
+			keypad,column = <7>;
+			linux,code = <18>;
+		};
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
diff --git a/src/arm/exynos4412-tiny4412.dts b/src/arm/exynos4412-tiny4412.dts
new file mode 100644
index 000000000000..d46fd4c2aeaa
--- /dev/null
+++ b/src/arm/exynos4412-tiny4412.dts
@@ -0,0 +1,97 @@
+/*
+ * FriendlyARM's Exynos4412 based TINY4412 board device tree source
+ *
+ * Copyright (c) 2013 Alex Ling <kasimling@gmail.com>
+ *
+ * Device tree source file for FriendlyARM's TINY4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+	model = "FriendlyARM TINY4412 board based on Exynos4412";
+	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "led1";
+			gpios = <&gpm4 0 1>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpm4 1 1>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "led3";
+			gpios = <&gpm4 2 1>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "led4";
+			gpios = <&gpm4 3 1>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
diff --git a/src/arm/exynos4412-trats2.dts b/src/arm/exynos4412-trats2.dts
new file mode 100644
index 000000000000..21f748083586
--- /dev/null
+++ b/src/arm/exynos4412-trats2.dts
@@ -0,0 +1,1291 @@
+/*
+ * Samsung's Exynos4412 based Trats 2 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats 2 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Trats 2 based on Exynos4412";
+	compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
+
+	aliases {
+		i2c9 = &i2c_ak8975;
+		i2c10 = &i2c_cm36651;
+		i2c11 = &i2c_max77693;
+		i2c12 = &i2c_max77693_fuel;
+	};
+
+	memory {
+		reg =  <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+		stdout-path = &serial_2;
+	};
+
+	firmware@0204F000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204F000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti", "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti", "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cam_io_reg: voltage-regulator-1 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_SENSOR_A";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpm0 2 0>;
+			enable-active-high;
+		};
+
+		lcd_vdd3_reg: voltage-regulator-2 {
+			compatible = "regulator-fixed";
+			regulator-name = "LCD_VDD_2.2V";
+			regulator-min-microvolt = <2200000>;
+			regulator-max-microvolt = <2200000>;
+			gpio = <&gpc0 1 0>;
+			enable-active-high;
+		};
+
+		cam_af_reg: voltage-regulator-3 {
+			compatible = "regulator-fixed";
+			regulator-name = "CAM_AF";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpm0 4 0>;
+			enable-active-high;
+		};
+
+		ps_als_reg: voltage-regulator-5 {
+			compatible = "regulator-fixed";
+			regulator-name = "LED_A_3.0V";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpj0 5 0>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-down {
+			gpios = <&gpx3 3 1>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		key-up {
+			gpios = <&gpx2 2 1>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			gpios = <&gpx2 7 1>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+
+		key-ok {
+			gpios = <&gpx0 1 1>;
+			linux,code = <139>;
+			label = "ok";
+			debounce-inteval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	adc: adc@126C0000 {
+		vdd-supply = <&ldo3_reg>;
+		status = "okay";
+	};
+
+	i2c@13890000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <400000>;
+		pinctrl-0 = <&i2c3_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		mms114-touchscreen@48 {
+			compatible = "melfas,mms114";
+			reg = <0x48>;
+			interrupt-parent = <&gpm2>;
+			interrupts = <3 2>;
+			x-size = <720>;
+			y-size = <1280>;
+			avdd-supply = <&ldo23_reg>;
+			vdd-supply = <&ldo24_reg>;
+		};
+	};
+
+	i2c_0: i2c@13860000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <400000>;
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		s5c73m3@3c {
+			compatible = "samsung,s5c73m3";
+			reg = <0x3c>;
+			standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
+			xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+			vdd-int-supply = <&buck9_reg>;
+			vddio-cis-supply = <&ldo9_reg>;
+			vdda-supply = <&ldo17_reg>;
+			vddio-host-supply = <&ldo18_reg>;
+			vdd-af-supply = <&cam_af_reg>;
+			vdd-reg-supply = <&cam_io_reg>;
+			clock-frequency = <24000000>;
+			/* CAM_A_CLKOUT */
+			clocks = <&camera 0>;
+			clock-names = "cis_extclk";
+			port {
+				s5c73m3_ep: endpoint {
+					remote-endpoint = <&csis0_ep>;
+					data-lanes = <1 2 3 4>;
+				};
+			};
+		};
+	};
+
+	i2c@138A0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c4_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		wm1811: wm1811@1a {
+			compatible = "wlf,wm1811";
+			reg = <0x1a>;
+			clocks = <&pmu_system_controller 0>;
+			clock-names = "MCLK1";
+			DCVDD-supply = <&ldo3_reg>;
+			DBVDD1-supply = <&ldo3_reg>;
+			wlf,ldo1ena = <&gpj0 4 0>;
+		};
+	};
+
+	i2c@138D0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <100000>;
+		pinctrl-0 = <&i2c7_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		max77686_pmic@09 {
+			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx0>;
+			interrupts = <7 0>;
+			reg = <0x09>;
+			#clock-cells = <1>;
+
+			voltage-regulators {
+				ldo1_reg: ldo1 {
+					regulator-compatible = "LDO1";
+					regulator-name = "VALIVE_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-compatible = "LDO2";
+					regulator-name = "VM1M2_1.2V_AP";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				ldo3_reg: ldo3 {
+					regulator-compatible = "LDO3";
+					regulator-name = "VCC_1.8V_AP";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: ldo4 {
+					regulator-compatible = "LDO4";
+					regulator-name = "VCC_2.8V_AP";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-compatible = "LDO5";
+					regulator-name = "VCC_1.8V_IO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-compatible = "LDO6";
+					regulator-name = "VMPLL_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-compatible = "LDO7";
+					regulator-name = "VPLL_1.0V_AP";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-compatible = "LDO8";
+					regulator-name = "VMIPI_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo9_reg: ldo9 {
+					regulator-compatible = "LDO9";
+					regulator-name = "CAM_ISP_MIPI_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo10_reg: ldo10 {
+					regulator-compatible = "LDO10";
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo11_reg: ldo11 {
+					regulator-compatible = "LDO11";
+					regulator-name = "VABB1_1.95V";
+					regulator-min-microvolt = <1950000>;
+					regulator-max-microvolt = <1950000>;
+					regulator-always-on;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo12_reg: ldo12 {
+					regulator-compatible = "LDO12";
+					regulator-name = "VUOTG_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo13_reg: ldo13 {
+					regulator-compatible = "LDO13";
+					regulator-name = "NFC_AVDD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo14_reg: ldo14 {
+					regulator-compatible = "LDO14";
+					regulator-name = "VABB2_1.95V";
+					regulator-min-microvolt = <1950000>;
+					regulator-max-microvolt = <1950000>;
+					regulator-always-on;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo15_reg: ldo15 {
+					regulator-compatible = "LDO15";
+					regulator-name = "VHSIC_1.0V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				ldo16_reg: ldo16 {
+					regulator-compatible = "LDO16";
+					regulator-name = "VHSIC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				ldo17_reg: ldo17 {
+					regulator-compatible = "LDO17";
+					regulator-name = "CAM_SENSOR_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo18_reg: ldo18 {
+					regulator-compatible = "LDO18";
+					regulator-name = "CAM_ISP_SEN_IO_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo19_reg: ldo19 {
+					regulator-compatible = "LDO19";
+					regulator-name = "VT_CAM_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo20_reg: ldo20 {
+					regulator-compatible = "LDO20";
+					regulator-name = "VDDQ_PRE_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo21_reg: ldo21 {
+					regulator-compatible = "LDO21";
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
+				};
+
+				ldo22_reg: ldo22 {
+					regulator-compatible = "LDO22";
+					regulator-name = "VMEM_VDD_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+				};
+
+				ldo23_reg: ldo23 {
+					regulator-compatible = "LDO23";
+					regulator-name = "TSP_AVDD_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo24_reg: ldo24 {
+					regulator-compatible = "LDO24";
+					regulator-name = "TSP_VDD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo25_reg: ldo25 {
+					regulator-compatible = "LDO25";
+					regulator-name = "LCD_VCC_3.3V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo26_reg: ldo26 {
+					regulator-compatible = "LDO26";
+					regulator-name = "MOTOR_VCC_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				buck1_reg: buck1 {
+					regulator-compatible = "BUCK1";
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				buck2_reg: buck2 {
+					regulator-compatible = "BUCK2";
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				buck3_reg: buck3 {
+					regulator-compatible = "BUCK3";
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				buck4_reg: buck4 {
+					regulator-compatible = "BUCK4";
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-boot-on;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				buck5_reg: buck5 {
+					regulator-compatible = "BUCK5";
+					regulator-name = "VMEM_1.2V_AP";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck6_reg: buck6 {
+					regulator-compatible = "BUCK6";
+					regulator-name = "VCC_SUB_1.35V";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: buck7 {
+					regulator-compatible = "BUCK7";
+					regulator-name = "VCC_SUB_2.0V";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: buck8 {
+					regulator-compatible = "BUCK8";
+					regulator-name = "VMEM_VDDF_3.0V";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+				};
+
+				buck9_reg: buck9 {
+					regulator-compatible = "BUCK9";
+					regulator-name = "CAM_ISP_CORE_1.2V";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
+					maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+				};
+			};
+		};
+	};
+
+	i2c_max77693: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		max77693@66 {
+			compatible = "maxim,max77693";
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 2>;
+			reg = <0x66>;
+
+			regulators {
+				esafeout1_reg: ESAFEOUT1@1 {
+					regulator-name = "ESAFEOUT1";
+				};
+				esafeout2_reg: ESAFEOUT2@2 {
+					regulator-name = "ESAFEOUT2";
+				};
+				charger_reg: CHARGER@0 {
+					regulator-name = "CHARGER";
+					regulator-min-microamp = <60000>;
+					regulator-max-microamp = <2580000>;
+				};
+			};
+
+			max77693_haptic {
+				compatible = "maxim,max77693-haptic";
+				haptic-supply = <&ldo26_reg>;
+				pwms = <&pwm 0 38022 0>;
+			};
+
+			charger {
+				compatible = "maxim,max77693-charger";
+
+				maxim,constant-microvolt = <4350000>;
+				maxim,min-system-microvolt = <3600000>;
+				maxim,thermal-regulation-celsius = <100>;
+				maxim,battery-overcurrent-microamp = <3500000>;
+				maxim,charge-input-threshold-microvolt = <4300000>;
+			};
+		};
+	};
+
+	i2c_max77693_fuel: i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		max77693-fuel-gauge@36 {
+			compatible = "maxim,max17047";
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			reg = <0x36>;
+		};
+	};
+
+	mmc@12550000 {
+		num-slots = <1>;
+		broken-cd;
+		non-removable;
+		card-detect-delay = <200>;
+		vmmc-supply = <&ldo22_reg>;
+		clock-frequency = <400000000>;
+		samsung,dw-mshc-ciu-div = <0>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		status = "okay";
+		bus-width = <8>;
+		cap-mmc-highspeed;
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		cd-gpios = <&gpx3 4 0>;
+		cd-inverted;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+		pinctrl-names = "default";
+		vmmc-supply = <&ldo21_reg>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	tmu@100C0000 {
+		vtmu-supply = <&ldo10_reg>;
+		status = "okay";
+	};
+
+	i2c_ak8975: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		gpios = <&gpy2 4 0>, <&gpy2 5 0>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		ak8975@0c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0x0c>;
+			gpios = <&gpj0 7 0>;
+		};
+	};
+
+	i2c_cm36651: i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		gpios = <&gpf0 0 1>, <&gpf0 1 1>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cm36651@18 {
+			compatible = "capella,cm36651";
+			reg = <0x18>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <2 2>;
+			vled-supply = <&ps_als_reg>;
+		};
+	};
+
+	spi_1: spi@13930000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_bus>;
+		cs-gpios = <&gpb 5 0>;
+		status = "okay";
+
+		s5c73m3_spi: s5c73m3 {
+			compatible = "samsung,s5c73m3";
+			spi-max-frequency = <50000000>;
+			reg = <0>;
+			controller-data {
+				samsung,spi-feedback-delay = <2>;
+			};
+		};
+	};
+
+	pwm: pwm@139D0000 {
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+		samsung,pwm-outputs = <0>;
+		status = "okay";
+	};
+
+	dsi_0: dsi@11C80000 {
+		vddcore-supply = <&ldo8_reg>;
+		vddio-supply = <&ldo10_reg>;
+		samsung,pll-clock-frequency = <24000000>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				dsi_out: endpoint {
+					remote-endpoint = <&dsi_in>;
+					samsung,burst-clock-frequency = <500000000>;
+					samsung,esc-clock-frequency = <20000000>;
+				};
+			};
+		};
+
+		panel@0 {
+			compatible = "samsung,s6e8aa0";
+			reg = <0>;
+			vdd3-supply = <&lcd_vdd3_reg>;
+			vci-supply = <&ldo25_reg>;
+			reset-gpios = <&gpy4 5 0>;
+			power-on-delay= <50>;
+			reset-delay = <100>;
+			init-delay = <100>;
+			flip-horizontal;
+			flip-vertical;
+			panel-width-mm = <58>;
+			panel-height-mm = <103>;
+
+			display-timings {
+				timing-0 {
+					clock-frequency = <0>;
+					hactive = <720>;
+					vactive = <1280>;
+					hfront-porch = <5>;
+					hback-porch = <5>;
+					hsync-len = <5>;
+					vfront-porch = <13>;
+					vback-porch = <1>;
+					vsync-len = <2>;
+				};
+			};
+
+			port {
+				dsi_in: endpoint {
+					remote-endpoint = <&dsi_out>;
+				};
+			};
+		};
+	};
+
+	fimd@11c00000 {
+		status = "okay";
+	};
+
+	camera: camera {
+		pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
+		pinctrl-names = "default";
+		status = "okay";
+		assigned-clocks = <&clock CLK_MOUT_CAM0>,
+				  <&clock CLK_MOUT_CAM1>;
+		assigned-clock-parents = <&clock CLK_XUSBXTI>,
+					 <&clock CLK_XUSBXTI>;
+
+		fimc_0: fimc@11800000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+					<&clock CLK_SCLK_FIMC0>;
+			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+			assigned-clock-rates = <0>, <176000000>;
+		};
+
+		fimc_1: fimc@11810000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+					<&clock CLK_SCLK_FIMC1>;
+			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+			assigned-clock-rates = <0>, <176000000>;
+		};
+
+		fimc_2: fimc@11820000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+					<&clock CLK_SCLK_FIMC2>;
+			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+			assigned-clock-rates = <0>, <176000000>;
+		};
+
+		fimc_3: fimc@11830000 {
+			status = "okay";
+			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+					<&clock CLK_SCLK_FIMC3>;
+			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+			assigned-clock-rates = <0>, <176000000>;
+		};
+
+		csis_0: csis@11880000 {
+			status = "okay";
+			vddcore-supply = <&ldo8_reg>;
+			vddio-supply = <&ldo10_reg>;
+			assigned-clocks = <&clock CLK_MOUT_CSIS0>,
+					<&clock CLK_SCLK_CSIS0>;
+			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+			assigned-clock-rates = <0>, <176000000>;
+
+			/* Camera C (3) MIPI CSI-2 (CSIS0) */
+			port@3 {
+				reg = <3>;
+				csis0_ep: endpoint {
+					remote-endpoint = <&s5c73m3_ep>;
+					data-lanes = <1 2 3 4>;
+					samsung,csis-hs-settle = <12>;
+				};
+			};
+		};
+
+		csis_1: csis@11890000 {
+			status = "okay";
+			vddcore-supply = <&ldo8_reg>;
+			vddio-supply = <&ldo10_reg>;
+			assigned-clocks = <&clock CLK_MOUT_CSIS1>,
+					<&clock CLK_SCLK_CSIS1>;
+			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+			assigned-clock-rates = <0>, <176000000>;
+
+			/* Camera D (4) MIPI CSI-2 (CSIS1) */
+			port@4 {
+				reg = <4>;
+				csis1_ep: endpoint {
+					remote-endpoint = <&is_s5k6a3_ep>;
+					data-lanes = <1>;
+					samsung,csis-hs-settle = <18>;
+					samsung,csis-wclk;
+				};
+			};
+		};
+
+		fimc_lite_0: fimc-lite@12390000 {
+			status = "okay";
+		};
+
+		fimc_lite_1: fimc-lite@123A0000 {
+			status = "okay";
+		};
+
+		fimc-is@12000000 {
+			pinctrl-0 = <&fimc_is_uart>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			i2c1_isp: i2c-isp@12140000 {
+				pinctrl-0 = <&fimc_is_i2c1>;
+				pinctrl-names = "default";
+
+				s5k6a3@10 {
+					compatible = "samsung,s5k6a3";
+					reg = <0x10>;
+					svdda-supply = <&cam_io_reg>;
+					svddio-supply = <&ldo19_reg>;
+					afvdd-supply = <&ldo19_reg>;
+					clock-frequency = <24000000>;
+					/* CAM_B_CLKOUT */
+					clocks = <&camera 1>;
+					clock-names = "extclk";
+					samsung,camclk-out = <1>;
+					gpios = <&gpm1 6 0>;
+
+					port {
+						is_s5k6a3_ep: endpoint {
+							remote-endpoint = <&csis1_ep>;
+							data-lanes = <1>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	i2s0: i2s@03830000 {
+		pinctrl-0 = <&i2s0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	sound {
+		compatible = "samsung,trats2-audio";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,model = "Trats2";
+		samsung,audio-codec = <&wm1811>;
+		samsung,audio-routing =
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
+			"SPK", "SPKOUTRN",
+			"SPK", "SPKOUTRP";
+	};
+
+	exynos-usbphy@125B0000 {
+		status = "okay";
+	};
+
+	hsotg@12480000 {
+		vusb_d-supply = <&ldo15_reg>;
+		vusb_a-supply = <&ldo12_reg>;
+		dr_mode = "peripheral";
+		status = "okay";
+	};
+
+	thermistor-ap@0 {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
+		pullup-ohm = <100000>;	 /* 100K */
+		pulldown-ohm = <100000>; /* 100K */
+		io-channels = <&adc 1>;  /* AP temperature */
+	};
+
+	thermistor-battery@1 {
+		compatible = "ntc,ncp15wb473";
+		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
+		pullup-ohm = <100000>;	 /* 100K */
+		pulldown-ohm = <100000>; /* 100K */
+		io-channels = <&adc 2>;  /* Battery temperature */
+	};
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
+};
+
+&ppmu_dmc0 {
+	status = "okay";
+
+	events {
+		ppmu_dmc0_3: ppmu-event3-dmc0 {
+			event-name = "ppmu-event3-dmc0";
+		};
+	};
+};
+
+&ppmu_dmc1 {
+	status = "okay";
+
+	events {
+		ppmu_dmc1_3: ppmu-event3-dmc1 {
+			event-name = "ppmu-event3-dmc1";
+		};
+	};
+};
+
+&ppmu_leftbus {
+	status = "okay";
+
+	events {
+		ppmu_leftbus_3: ppmu-event3-leftbus {
+			event-name = "ppmu-event3-leftbus";
+		};
+	};
+};
+
+&ppmu_rightbus {
+	status = "okay";
+
+	events {
+		ppmu_rightbus_3: ppmu-event3-rightbus {
+			event-name = "ppmu-event3-rightbus";
+		};
+	};
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	sleep0: sleep-states {
+		PIN_SLP(gpa0-0, INPUT, NONE);
+		PIN_SLP(gpa0-1, OUT0, NONE);
+		PIN_SLP(gpa0-2, INPUT, NONE);
+		PIN_SLP(gpa0-3, INPUT, UP);
+		PIN_SLP(gpa0-4, INPUT, NONE);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, UP);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, INPUT, NONE);
+		PIN_SLP(gpb-1, INPUT, NONE);
+		PIN_SLP(gpb-2, INPUT, NONE);
+		PIN_SLP(gpb-3, INPUT, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, UP);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, DOWN);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, INPUT, DOWN);
+
+		PIN_SLP(gpc1-0, INPUT, NONE);
+		PIN_SLP(gpc1-1, PREV, NONE);
+		PIN_SLP(gpc1-2, INPUT, NONE);
+		PIN_SLP(gpc1-3, INPUT, NONE);
+		PIN_SLP(gpc1-4, INPUT, NONE);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, INPUT, DOWN);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, DOWN);
+		PIN_SLP(gpd1-1, INPUT, DOWN);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+
+		PIN_SLP(gpf0-0, INPUT, NONE);
+		PIN_SLP(gpf0-1, INPUT, NONE);
+		PIN_SLP(gpf0-2, INPUT, DOWN);
+		PIN_SLP(gpf0-3, INPUT, DOWN);
+		PIN_SLP(gpf0-4, INPUT, NONE);
+		PIN_SLP(gpf0-5, INPUT, DOWN);
+		PIN_SLP(gpf0-6, INPUT, NONE);
+		PIN_SLP(gpf0-7, INPUT, DOWN);
+
+		PIN_SLP(gpf1-0, INPUT, DOWN);
+		PIN_SLP(gpf1-1, INPUT, DOWN);
+		PIN_SLP(gpf1-2, INPUT, DOWN);
+		PIN_SLP(gpf1-3, INPUT, DOWN);
+		PIN_SLP(gpf1-4, INPUT, NONE);
+		PIN_SLP(gpf1-5, INPUT, NONE);
+		PIN_SLP(gpf1-6, INPUT, DOWN);
+		PIN_SLP(gpf1-7, PREV, NONE);
+
+		PIN_SLP(gpf2-0, PREV, NONE);
+		PIN_SLP(gpf2-1, INPUT, DOWN);
+		PIN_SLP(gpf2-2, INPUT, DOWN);
+		PIN_SLP(gpf2-3, INPUT, DOWN);
+		PIN_SLP(gpf2-4, INPUT, DOWN);
+		PIN_SLP(gpf2-5, INPUT, DOWN);
+		PIN_SLP(gpf2-6, INPUT, NONE);
+		PIN_SLP(gpf2-7, INPUT, NONE);
+
+		PIN_SLP(gpf3-0, INPUT, NONE);
+		PIN_SLP(gpf3-1, PREV, NONE);
+		PIN_SLP(gpf3-2, PREV, NONE);
+		PIN_SLP(gpf3-3, PREV, NONE);
+		PIN_SLP(gpf3-4, OUT1, NONE);
+		PIN_SLP(gpf3-5, INPUT, DOWN);
+
+		PIN_SLP(gpj0-0, PREV, NONE);
+		PIN_SLP(gpj0-1, PREV, NONE);
+		PIN_SLP(gpj0-2, PREV, NONE);
+		PIN_SLP(gpj0-3, INPUT, DOWN);
+		PIN_SLP(gpj0-4, PREV, NONE);
+		PIN_SLP(gpj0-5, PREV, NONE);
+		PIN_SLP(gpj0-6, INPUT, DOWN);
+		PIN_SLP(gpj0-7, INPUT, DOWN);
+
+		PIN_SLP(gpj1-0, INPUT, DOWN);
+		PIN_SLP(gpj1-1, PREV, NONE);
+		PIN_SLP(gpj1-2, PREV, NONE);
+		PIN_SLP(gpj1-3, INPUT, DOWN);
+		PIN_SLP(gpj1-4, INPUT, DOWN);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep1>;
+
+	sleep1: sleep-states {
+		PIN_SLP(gpk0-0, PREV, NONE);
+		PIN_SLP(gpk0-1, PREV, NONE);
+		PIN_SLP(gpk0-2, OUT0, NONE);
+		PIN_SLP(gpk0-3, PREV, NONE);
+		PIN_SLP(gpk0-4, PREV, NONE);
+		PIN_SLP(gpk0-5, PREV, NONE);
+		PIN_SLP(gpk0-6, PREV, NONE);
+
+		PIN_SLP(gpk1-0, INPUT, DOWN);
+		PIN_SLP(gpk1-1, INPUT, DOWN);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, PREV, NONE);
+		PIN_SLP(gpk1-4, PREV, NONE);
+		PIN_SLP(gpk1-5, PREV, NONE);
+		PIN_SLP(gpk1-6, PREV, NONE);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpk3-0, OUT0, NONE);
+		PIN_SLP(gpk3-1, INPUT, NONE);
+		PIN_SLP(gpk3-2, INPUT, DOWN);
+		PIN_SLP(gpk3-3, INPUT, NONE);
+		PIN_SLP(gpk3-4, INPUT, NONE);
+		PIN_SLP(gpk3-5, INPUT, NONE);
+		PIN_SLP(gpk3-6, INPUT, NONE);
+
+		PIN_SLP(gpl0-0, INPUT, DOWN);
+		PIN_SLP(gpl0-1, INPUT, DOWN);
+		PIN_SLP(gpl0-2, INPUT, DOWN);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+		PIN_SLP(gpl0-4, PREV, NONE);
+		PIN_SLP(gpl0-6, PREV, NONE);
+
+		PIN_SLP(gpl1-0, INPUT, DOWN);
+		PIN_SLP(gpl1-1, INPUT, DOWN);
+		PIN_SLP(gpl2-0, INPUT, DOWN);
+		PIN_SLP(gpl2-1, INPUT, DOWN);
+		PIN_SLP(gpl2-2, INPUT, DOWN);
+		PIN_SLP(gpl2-3, INPUT, DOWN);
+		PIN_SLP(gpl2-4, INPUT, DOWN);
+		PIN_SLP(gpl2-5, INPUT, DOWN);
+		PIN_SLP(gpl2-6, PREV, NONE);
+		PIN_SLP(gpl2-7, INPUT, DOWN);
+
+		PIN_SLP(gpm0-0, INPUT, DOWN);
+		PIN_SLP(gpm0-1, INPUT, DOWN);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, DOWN);
+		PIN_SLP(gpm0-4, INPUT, DOWN);
+		PIN_SLP(gpm0-5, INPUT, DOWN);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, INPUT, DOWN);
+
+		PIN_SLP(gpm1-0, INPUT, DOWN);
+		PIN_SLP(gpm1-1, INPUT, DOWN);
+		PIN_SLP(gpm1-2, INPUT, NONE);
+		PIN_SLP(gpm1-3, INPUT, NONE);
+		PIN_SLP(gpm1-4, INPUT, NONE);
+		PIN_SLP(gpm1-5, INPUT, NONE);
+		PIN_SLP(gpm1-6, INPUT, DOWN);
+
+		PIN_SLP(gpm2-0, INPUT, NONE);
+		PIN_SLP(gpm2-1, INPUT, NONE);
+		PIN_SLP(gpm2-2, INPUT, DOWN);
+		PIN_SLP(gpm2-3, INPUT, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, PREV, NONE);
+		PIN_SLP(gpm3-1, PREV, NONE);
+		PIN_SLP(gpm3-2, PREV, NONE);
+		PIN_SLP(gpm3-3, OUT1, NONE);
+		PIN_SLP(gpm3-4, INPUT, DOWN);
+		PIN_SLP(gpm3-5, INPUT, DOWN);
+		PIN_SLP(gpm3-6, INPUT, DOWN);
+		PIN_SLP(gpm3-7, INPUT, DOWN);
+
+		PIN_SLP(gpm4-0, INPUT, DOWN);
+		PIN_SLP(gpm4-1, INPUT, DOWN);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, INPUT, DOWN);
+		PIN_SLP(gpm4-5, INPUT, DOWN);
+		PIN_SLP(gpm4-6, INPUT, DOWN);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy0-0, INPUT, DOWN);
+		PIN_SLP(gpy0-1, INPUT, DOWN);
+		PIN_SLP(gpy0-2, INPUT, DOWN);
+		PIN_SLP(gpy0-3, INPUT, DOWN);
+		PIN_SLP(gpy0-4, INPUT, DOWN);
+		PIN_SLP(gpy0-5, INPUT, DOWN);
+
+		PIN_SLP(gpy1-0, INPUT, DOWN);
+		PIN_SLP(gpy1-1, INPUT, DOWN);
+		PIN_SLP(gpy1-2, INPUT, DOWN);
+		PIN_SLP(gpy1-3, INPUT, DOWN);
+
+		PIN_SLP(gpy2-0, PREV, NONE);
+		PIN_SLP(gpy2-1, INPUT, DOWN);
+		PIN_SLP(gpy2-2, INPUT, NONE);
+		PIN_SLP(gpy2-3, INPUT, NONE);
+		PIN_SLP(gpy2-4, INPUT, NONE);
+		PIN_SLP(gpy2-5, INPUT, NONE);
+
+		PIN_SLP(gpy3-0, INPUT, DOWN);
+		PIN_SLP(gpy3-1, INPUT, DOWN);
+		PIN_SLP(gpy3-2, INPUT, DOWN);
+		PIN_SLP(gpy3-3, INPUT, DOWN);
+		PIN_SLP(gpy3-4, INPUT, DOWN);
+		PIN_SLP(gpy3-5, INPUT, DOWN);
+		PIN_SLP(gpy3-6, INPUT, DOWN);
+		PIN_SLP(gpy3-7, INPUT, DOWN);
+
+		PIN_SLP(gpy4-0, INPUT, DOWN);
+		PIN_SLP(gpy4-1, INPUT, DOWN);
+		PIN_SLP(gpy4-2, INPUT, DOWN);
+		PIN_SLP(gpy4-3, INPUT, DOWN);
+		PIN_SLP(gpy4-4, INPUT, DOWN);
+		PIN_SLP(gpy4-5, INPUT, DOWN);
+		PIN_SLP(gpy4-6, INPUT, DOWN);
+		PIN_SLP(gpy4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy5-0, INPUT, DOWN);
+		PIN_SLP(gpy5-1, INPUT, DOWN);
+		PIN_SLP(gpy5-2, INPUT, DOWN);
+		PIN_SLP(gpy5-3, INPUT, DOWN);
+		PIN_SLP(gpy5-4, INPUT, DOWN);
+		PIN_SLP(gpy5-5, INPUT, DOWN);
+		PIN_SLP(gpy5-6, INPUT, DOWN);
+		PIN_SLP(gpy5-7, INPUT, DOWN);
+
+		PIN_SLP(gpy6-0, INPUT, DOWN);
+		PIN_SLP(gpy6-1, INPUT, DOWN);
+		PIN_SLP(gpy6-2, INPUT, DOWN);
+		PIN_SLP(gpy6-3, INPUT, DOWN);
+		PIN_SLP(gpy6-4, INPUT, DOWN);
+		PIN_SLP(gpy6-5, INPUT, DOWN);
+		PIN_SLP(gpy6-6, INPUT, DOWN);
+		PIN_SLP(gpy6-7, INPUT, DOWN);
+	};
+};
+
+&pinctrl_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep2>;
+
+	sleep2: sleep-states {
+		PIN_SLP(gpz-0, INPUT, DOWN);
+		PIN_SLP(gpz-1, INPUT, DOWN);
+		PIN_SLP(gpz-2, INPUT, DOWN);
+		PIN_SLP(gpz-3, INPUT, DOWN);
+		PIN_SLP(gpz-4, INPUT, DOWN);
+		PIN_SLP(gpz-5, INPUT, DOWN);
+		PIN_SLP(gpz-6, INPUT, DOWN);
+	};
+};
+
+&pinctrl_3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep3>;
+
+	sleep3: sleep-states {
+		PIN_SLP(gpv0-0, INPUT, DOWN);
+		PIN_SLP(gpv0-1, INPUT, DOWN);
+		PIN_SLP(gpv0-2, INPUT, DOWN);
+		PIN_SLP(gpv0-3, INPUT, DOWN);
+		PIN_SLP(gpv0-4, INPUT, DOWN);
+		PIN_SLP(gpv0-5, INPUT, DOWN);
+		PIN_SLP(gpv0-6, INPUT, DOWN);
+		PIN_SLP(gpv0-7, INPUT, DOWN);
+
+		PIN_SLP(gpv1-0, INPUT, DOWN);
+		PIN_SLP(gpv1-1, INPUT, DOWN);
+		PIN_SLP(gpv1-2, INPUT, DOWN);
+		PIN_SLP(gpv1-3, INPUT, DOWN);
+		PIN_SLP(gpv1-4, INPUT, DOWN);
+		PIN_SLP(gpv1-5, INPUT, DOWN);
+		PIN_SLP(gpv1-6, INPUT, DOWN);
+		PIN_SLP(gpv1-7, INPUT, DOWN);
+
+		PIN_SLP(gpv2-0, INPUT, DOWN);
+		PIN_SLP(gpv2-1, INPUT, DOWN);
+		PIN_SLP(gpv2-2, INPUT, DOWN);
+		PIN_SLP(gpv2-3, INPUT, DOWN);
+		PIN_SLP(gpv2-4, INPUT, DOWN);
+		PIN_SLP(gpv2-5, INPUT, DOWN);
+		PIN_SLP(gpv2-6, INPUT, DOWN);
+		PIN_SLP(gpv2-7, INPUT, DOWN);
+
+		PIN_SLP(gpv3-0, INPUT, DOWN);
+		PIN_SLP(gpv3-1, INPUT, DOWN);
+		PIN_SLP(gpv3-2, INPUT, DOWN);
+		PIN_SLP(gpv3-3, INPUT, DOWN);
+		PIN_SLP(gpv3-4, INPUT, DOWN);
+		PIN_SLP(gpv3-5, INPUT, DOWN);
+		PIN_SLP(gpv3-6, INPUT, DOWN);
+		PIN_SLP(gpv3-7, INPUT, DOWN);
+
+		PIN_SLP(gpv4-0, INPUT, DOWN);
+	};
+};
diff --git a/src/arm/exynos4412.dtsi b/src/arm/exynos4412.dtsi
new file mode 100644
index 000000000000..0f6ec93bb1d8
--- /dev/null
+++ b/src/arm/exynos4412.dtsi
@@ -0,0 +1,69 @@
+/*
+ * Samsung's Exynos4412 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "exynos4x12.dtsi"
+
+/ {
+	compatible = "samsung,exynos4412", "samsung,exynos4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@A00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA00>;
+		};
+
+		cpu@A01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA01>;
+		};
+
+		cpu@A02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA02>;
+		};
+
+		cpu@A03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xA03>;
+		};
+	};
+
+	combiner: interrupt-controller@10440000 {
+		samsung,combiner-nr = <20>;
+	};
+
+	pmu {
+		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
+	};
+
+	gic: interrupt-controller@10490000 {
+		cpu-offset = <0x4000>;
+	};
+
+	pmu_system_controller: system-controller@10020000 {
+		compatible = "samsung,exynos4412-pmu", "syscon";
+	};
+};
diff --git a/src/arm/exynos4415-pinctrl.dtsi b/src/arm/exynos4415-pinctrl.dtsi
new file mode 100644
index 000000000000..75af9c56123e
--- /dev/null
+++ b/src/arm/exynos4415-pinctrl.dtsi
@@ -0,0 +1,573 @@
+/*
+ * Samsung's Exynos4415 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos4415 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <0x2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm0: gpm0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
+				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
+				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpk0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpk2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <4>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpk2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <4>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpk2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpk2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <4>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <4>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c0: fimc-is-i2c0 {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_i2c1: fimc-is-i2c1 {
+		samsung,pins = "gpm4-2", "gpm4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	fimc_is_uart: fimc-is-uart {
+		samsung,pins = "gpm3-5", "gpm3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_2 {
+	gpz: gpz {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/src/arm/exynos4415.dtsi b/src/arm/exynos4415.dtsi
new file mode 100644
index 000000000000..5caea996e090
--- /dev/null
+++ b/src/arm/exynos4415.dtsi
@@ -0,0 +1,638 @@
+/*
+ * Samsung's Exynos4415 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos4415 SoC device nodes are listed in this file. Exynos4415
+ * based board files can include this file and provide values for board
+ * specific bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4415 SoC. As device tree coverage for Exynos4415 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos4415.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
+
+/ {
+	compatible = "samsung,exynos4415";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		mshc0 = &mshc_0;
+		mshc1 = &mshc_1;
+		mshc2 = &mshc_2;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@a00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa00>;
+			clock-frequency = <1600000000>;
+		};
+
+		cpu1: cpu@a01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa01>;
+			clock-frequency = <1600000000>;
+		};
+
+		cpu2: cpu@a02 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa02>;
+			clock-frequency = <1600000000>;
+		};
+
+		cpu3: cpu@a03 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0xa03>;
+			clock-frequency = <1600000000>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x50000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x50000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@4f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x4f000 0x1000>;
+			};
+		};
+
+		pinctrl_2: pinctrl@03860000 {
+			compatible = "samsung,exynos4415-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <0 242 0>;
+		};
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		sysreg_system_controller: syscon@10010000 {
+			compatible = "samsung,exynos4-sysreg", "syscon";
+			reg = <0x10010000 0x400>;
+		};
+
+		pmu_system_controller: system-controller@10020000 {
+			compatible = "samsung,exynos4415-pmu", "syscon";
+			reg = <0x10020000 0x4000>;
+		};
+
+		mipi_phy: video-phy@10020710 {
+			compatible = "samsung,s5pv210-mipi-video-phy";
+			reg = <0x10020710 8>;
+			#phy-cells = <1>;
+		};
+
+		pd_cam: cam-power-domain@10024000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10024000 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		pd_tv: tv-power-domain@10024020 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10024020 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		pd_mfc: mfc-power-domain@10024040 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10024040 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		pd_g3d: g3d-power-domain@10024060 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10024060 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		pd_lcd0: lcd0-power-domain@10024080 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10024080 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		pd_isp0: isp0-power-domain@100240A0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100240A0 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		pd_isp1: isp1-power-domain@100240E0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100240E0 0x20>;
+			#power-domain-cells = <0>;
+		};
+
+		cmu: clock-controller@10030000 {
+			compatible = "samsung,exynos4415-cmu";
+			reg = <0x10030000 0x18000>;
+			#clock-cells = <1>;
+		};
+
+		rtc: rtc@10070000 {
+			compatible = "samsung,exynos3250-rtc";
+			reg = <0x10070000 0x100>;
+			interrupts = <0 73 0>, <0 74 0>;
+			status = "disabled";
+		};
+
+		mct@10050000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
+				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+			      <0x10482000 0x1000>,
+			      <0x10484000 0x2000>,
+			      <0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		l2c: l2-cache-controller@10502000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10502000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <2 2 1>;
+			arm,data-latency = <3 2 1>;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+			arm,double-linefill-wrap = <1>;
+			arm,prefetch-drop = <1>;
+			arm,prefetch-offset = <7>;
+		};
+
+		cmu_dmc: clock-controller@105C0000 {
+			compatible = "samsung,exynos4415-cmu-dmc";
+			reg = <0x105C0000 0x3000>;
+			#clock-cells = <1>;
+		};
+
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos4415-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <0 225 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 48 0>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos4415-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <0 240 0>;
+		};
+
+		fimd: fimd@11C00000 {
+			compatible = "samsung,exynos4415-fimd";
+			reg = <0x11C00000 0x30000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
+			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
+			clock-names = "sclk_fimd", "fimd";
+			samsung,power-domain = <&pd_lcd0>;
+			samsung,sysreg = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		dsi_0: dsi@11C80000 {
+			compatible = "samsung,exynos4415-mipi-dsi";
+			reg = <0x11C80000 0x10000>;
+			interrupts = <0 83 0>;
+			samsung,phy-type = <0>;
+			samsung,power-domain = <&pd_lcd0>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>;
+			clock-names = "bus_clk", "pll_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsotg: hsotg@12480000 {
+			compatible = "samsung,s3c6400-hsotg";
+			reg = <0x12480000 0x20000>;
+			interrupts = <0 141 0>;
+			clocks = <&cmu CLK_USBDEVICE>;
+			clock-names = "otg";
+			phys = <&exynos_usbphy 0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		mshc_0: mshc@12510000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12510000 0x1000>;
+			interrupts = <0 142 0>;
+			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mshc_1: mshc@12520000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12520000 0x1000>;
+			interrupts = <0 143 0>;
+			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mshc_2: mshc@12530000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12530000 0x1000>;
+			interrupts = <0 144 0>;
+			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ehci: ehci@12580000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12580000 0x100>;
+			interrupts = <0 140 0>;
+			clocks = <&cmu CLK_USBHOST>;
+			clock-names = "usbhost";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&exynos_usbphy 1>;
+				status = "disabled";
+			};
+			port@1 {
+				reg = <1>;
+				phys = <&exynos_usbphy 2>;
+				status = "disabled";
+			};
+			port@2 {
+				reg = <2>;
+				phys = <&exynos_usbphy 3>;
+				status = "disabled";
+			};
+		};
+
+		ohci: ohci@12590000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12590000 0x100>;
+			interrupts = <0 140 0>;
+			clocks = <&cmu CLK_USBHOST>;
+			clock-names = "usbhost";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				phys = <&exynos_usbphy 1>;
+				status = "disabled";
+			};
+		};
+
+		exynos_usbphy: exynos-usbphy@125B0000 {
+			compatible = "samsung,exynos4x12-usb2-phy";
+			reg = <0x125B0000 0x100>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			clocks = <&cmu CLK_USBDEVICE>, <&xusbxti>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&gic>;
+			ranges;
+
+			pdma0: pdma@12680000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12680000 0x1000>;
+				interrupts = <0 138 0>;
+				clocks = <&cmu CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: pdma@12690000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0x12690000 0x1000>;
+				interrupts = <0 139 0>;
+				clocks = <&cmu CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		adc: adc@126C0000 {
+			compatible = "samsung,exynos3250-adc",
+				     "samsung,exynos-adc-v2";
+			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+			interrupts = <0 137 0>;
+			clock-names = "adc", "sclk";
+			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <0 109 0>;
+			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <0 110 0>;
+			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_2: serial@13820000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <0 111 0>;
+			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_3: serial@13830000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13830000 0x100>;
+			interrupts = <0 112 0>;
+			clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13860000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <0 113 0>;
+			clocks = <&cmu CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13870000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <0 114 0>;
+			clocks = <&cmu CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13880000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <0 115 0>;
+			clocks = <&cmu CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13890000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <0 116 0>;
+			clocks = <&cmu CLK_I2C3>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			status = "disabled";
+		};
+
+		i2c_4: i2c@138A0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138A0000 0x100>;
+			interrupts = <0 117 0>;
+			clocks = <&cmu CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
+
+		i2c_5: i2c@138B0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138B0000 0x100>;
+			interrupts = <0 118 0>;
+			clocks = <&cmu CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
+
+		i2c_6: i2c@138C0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138C0000 0x100>;
+			interrupts = <0 119 0>;
+			clocks = <&cmu CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
+
+		i2c_7: i2c@138D0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138D0000 0x100>;
+			interrupts = <0 120 0>;
+			clocks = <&cmu CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
+
+		spi_0: spi@13920000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13920000 0x100>;
+			interrupts = <0 121 0>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			status = "disabled";
+		};
+
+		spi_1: spi@13930000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13930000 0x100>;
+			interrupts = <0 122 0>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			status = "disabled";
+		};
+
+		spi_2: spi@13940000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13940000 0x100>;
+			interrupts = <0 123 0>;
+			dmas = <&pdma0 9>, <&pdma0 8>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu CLK_SPI2>, <&cmu CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			status = "disabled";
+		};
+
+		clock_audss: clock-controller@03810000 {
+			compatible = "samsung,exynos4210-audss-clock";
+			reg = <0x03810000 0x0C>;
+			#clock-cells = <1>;
+		};
+
+		i2s0: i2s@3830000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0x03830000 0x100>;
+			interrupts = <0 124 0>;
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0";
+			dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 8>;
+			dma-names = "tx", "rx", "tx-sec";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			samsung,idma-addr = <0x03000000>;
+			status = "disabled";
+		};
+
+		pwm: pwm@139D0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x139D0000 0x1000>;
+			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+				     <0 107 0>, <0 108 0>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 18 0>, <0 19 0>, <0 20 0>, <0 21 0>;
+		};
+	};
+};
+
+#include "exynos4415-pinctrl.dtsi"
diff --git a/src/arm/exynos4x12-pinctrl.dtsi b/src/arm/exynos4x12-pinctrl.dtsi
new file mode 100644
index 000000000000..c141931378e7
--- /dev/null
+++ b/src/arm/exynos4x12-pinctrl.dtsi
@@ -0,0 +1,972 @@
+/*
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define PIN_PULL_NONE		0
+#define PIN_PULL_DOWN		1
+#define PIN_PULL_UP		3
+
+#define PIN_PDN_OUT0		0
+#define PIN_PDN_OUT1		1
+#define PIN_PDN_INPUT		2
+#define PIN_PDN_PREV		3
+
+#define PIN_SLP(_pin, _mode, _pull)				\
+	_pin {							\
+		samsung,pins = #_pin;				\
+		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
+	}
+
+/ {
+	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb: gpb {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf2: gpf2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf3: gpf3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa0-4", "gpa0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_fctl: uart2-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_a: uart-audio-a {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_bus: i2c3-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart3_data: uart3-data {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_b: uart-audio-b {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_bus: i2c4-bus {
+			samsung,pins = "gpb-0", "gpb-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_bus: i2c5-bus {
+			samsung,pins = "gpb-2", "gpb-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		ac97_bus: ac97-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s2_bus: i2s2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm2_bus: pcm2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif_bus: spdif-bus {
+			samsung,pins = "gpc1-0", "gpc1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_bus: i2c6-bus {
+			samsung,pins = "gpc1-3", "gpc1-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
+			samsung,pin-function = <5>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm0_out: pwm0-out {
+			samsung,pins = "gpd0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm1_out: pwm1-out {
+			samsung,pins = "gpd0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_ctrl: lcd-ctrl {
+			samsung,pins = "gpd0-0", "gpd0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_bus: i2c7-bus {
+			samsung,pins = "gpd0-2", "gpd0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm2_out: pwm2-out {
+			samsung,pins = "gpd0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm3_out: pwm3-out {
+			samsung,pins = "gpd0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_bus: i2c0-bus {
+			samsung,pins = "gpd1-0", "gpd1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		mipi0_clk: mipi0-clk {
+			samsung,pins = "gpd1-0", "gpd1-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_bus: i2c1-bus {
+			samsung,pins = "gpd1-2", "gpd1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		mipi1_clk: mipi1-clk {
+			samsung,pins = "gpd1-2", "gpd1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_clk: lcd-clk {
+			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data16: lcd-data-width16 {
+			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data18: lcd-data-width18 {
+			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+					"gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data24: lcd-data-width24 {
+			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_ldi: lcd-ldi {
+			samsung,pins = "gpf3-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a_io: cam-port-a-io {
+			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a_clk_active: cam-port-a-clk-active {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_a_clk_idle: cam-port-a-clk-idle {
+			samsung,pins = "gpj1-3";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@11000000 {
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk1: gpk1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk2: gpk2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk3: gpk3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl0: gpl0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl1: gpl1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl2: gpl2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm0: gpm0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm1: gpm1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm2: gpm2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm3: gpm3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm4: gpm4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_clk: sd4-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_cmd: sd4-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_cd: sd4-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus1: sd4-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus4: sd4-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus8: sd4-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpk1-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpk1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpk1-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpk1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpk2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpk2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpk2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpk2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus8: sd2-bus-width8 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_clk: sd3-clk {
+			samsung,pins = "gpk3-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cmd: sd3-cmd {
+			samsung,pins = "gpk3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cd: sd3-cd {
+			samsung,pins = "gpk3-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus1: sd3-bus-width1 {
+			samsung,pins = "gpk3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus4: sd3-bus-width4 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_b_io: cam-port-b-io {
+			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_b_clk_active: cam-port-b-clk-active {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		cam_port_b_clk_idle: cam-port-b-clk-idle {
+			samsung,pins = "gpm2-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint0: ext-int0 {
+			samsung,pins = "gpx0-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint8: ext-int8 {
+			samsung,pins = "gpx1-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint15: ext-int15 {
+			samsung,pins = "gpx1-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint16: ext-int16 {
+			samsung,pins = "gpx2-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint31: ext-int31 {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		fimc_is_i2c0: fimc-is-i2c0 {
+			samsung,pins = "gpm4-0", "gpm4-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		fimc_is_i2c1: fimc-is-i2c1 {
+			samsung,pins = "gpm4-2", "gpm4-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		fimc_is_uart: fimc-is-uart {
+			samsung,pins = "gpm3-5", "gpm3-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2s0_bus: i2s0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4", "gpz-5", "gpz-6";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm0_bus: pcm0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4";
+			samsung,pin-function = <0x3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@106E0000 {
+		gpv0: gpv0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv1: gpv1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv2: gpv2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv3: gpv3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv4: gpv4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		c2c_bus: c2c-bus {
+			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+					"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+					"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+					"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
+					"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+					"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+					"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+					"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
+					"gpv4-0", "gpv4-1";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+};
diff --git a/src/arm/exynos4x12.dtsi b/src/arm/exynos4x12.dtsi
new file mode 100644
index 000000000000..f5e0ae780d6c
--- /dev/null
+++ b/src/arm/exynos4x12.dtsi
@@ -0,0 +1,300 @@
+/*
+ * Samsung's Exynos4x12 SoCs device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "exynos4.dtsi"
+#include "exynos4x12-pinctrl.dtsi"
+
+/ {
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+		fimc-lite0 = &fimc_lite_0;
+		fimc-lite1 = &fimc_lite_1;
+		mshc0 = &mshc_0;
+	};
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x40000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x40000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@2f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x2f000 0x1000>;
+		};
+	};
+
+	pd_isp: isp-power-domain@10023CA0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CA0 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	l2c: l2-cache-controller@10502000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x10502000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+		arm,tag-latency = <2 2 1>;
+		arm,data-latency = <3 2 1>;
+		arm,double-linefill = <1>;
+		arm,double-linefill-incr = <0>;
+		arm,double-linefill-wrap = <1>;
+		arm,prefetch-drop = <1>;
+		arm,prefetch-offset = <7>;
+	};
+
+	clock: clock-controller@10030000 {
+		compatible = "samsung,exynos4412-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0>, <1>, <2>, <3>, <4>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &gic 0 57 0>,
+					<1 &combiner 12 5>,
+					<2 &combiner 12 6>,
+					<3 &combiner 12 7>,
+					<4 &gic 1 12 0>;
+		};
+	};
+
+	combiner: interrupt-controller@10440000 {
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+			     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+	};
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,exynos4x12-pinctrl";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 47 0>;
+	};
+
+	pinctrl_1: pinctrl@11000000 {
+		compatible = "samsung,exynos4x12-pinctrl";
+		reg = <0x11000000 0x1000>;
+		interrupts = <0 46 0>;
+
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	adc: adc@126C0000 {
+		compatible = "samsung,exynos-adc-v1";
+		reg = <0x126C0000 0x100>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 3>;
+		clocks = <&clock CLK_TSADC>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		status = "disabled";
+	};
+
+	pinctrl_2: pinctrl@03860000 {
+		compatible = "samsung,exynos4x12-pinctrl";
+		reg = <0x03860000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 0>;
+	};
+
+	pinctrl_3: pinctrl@106E0000 {
+		compatible = "samsung,exynos4x12-pinctrl";
+		reg = <0x106E0000 0x1000>;
+		interrupts = <0 72 0>;
+	};
+
+	pmu_system_controller: system-controller@10020000 {
+		compatible = "samsung,exynos4212-pmu", "syscon";
+		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+				"clkout4", "clkout8", "clkout9";
+		clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+			<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+			<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
+			<&clock CLK_XUSBXTI>;
+		#clock-cells = <1>;
+	};
+
+	g2d@10800000 {
+		compatible = "samsung,exynos4212-g2d";
+		reg = <0x10800000 0x1000>;
+		interrupts = <0 89 0>;
+		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
+		clock-names = "sclk_fimg2d", "fimg2d";
+		status = "disabled";
+	};
+
+	camera {
+		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+		fimc_0: fimc@11800000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,cam-if;
+		};
+
+		fimc_1: fimc@11810000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,cam-if;
+		};
+
+		fimc_2: fimc@11820000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <4224 8192 1920 4224>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,lcd-wb;
+			samsung,cam-if;
+		};
+
+		fimc_3: fimc@11830000 {
+			compatible = "samsung,exynos4212-fimc";
+			samsung,pix-limits = <1920 8192 1366 1920>;
+			samsung,rotators = <0>;
+			samsung,mainscaler-ext;
+			samsung,isp-wb;
+			samsung,lcd-wb;
+		};
+
+		fimc_lite_0: fimc-lite@12390000 {
+			compatible = "samsung,exynos4212-fimc-lite";
+			reg = <0x12390000 0x1000>;
+			interrupts = <0 105 0>;
+			power-domains = <&pd_isp>;
+			clocks = <&clock CLK_FIMC_LITE0>;
+			clock-names = "flite";
+			status = "disabled";
+		};
+
+		fimc_lite_1: fimc-lite@123A0000 {
+			compatible = "samsung,exynos4212-fimc-lite";
+			reg = <0x123A0000 0x1000>;
+			interrupts = <0 106 0>;
+			power-domains = <&pd_isp>;
+			clocks = <&clock CLK_FIMC_LITE1>;
+			clock-names = "flite";
+			status = "disabled";
+		};
+
+		fimc_is: fimc-is@12000000 {
+			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
+			reg = <0x12000000 0x260000>;
+			interrupts = <0 90 0>, <0 95 0>;
+			power-domains = <&pd_isp>;
+			clocks = <&clock CLK_FIMC_LITE0>,
+				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
+				 <&clock CLK_PPMUISPMX>,
+				 <&clock CLK_MOUT_MPLL_USER_T>,
+				 <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
+				 <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
+				 <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
+				 <&clock CLK_DIV_MCUISP0>,
+				 <&clock CLK_DIV_MCUISP1>,
+				 <&clock CLK_UART_ISP_SCLK>,
+				 <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
+				 <&clock CLK_ACLK400_MCUISP>,
+				 <&clock CLK_DIV_ACLK400_MCUISP>;
+			clock-names = "lite0", "lite1", "ppmuispx",
+				      "ppmuispmx", "mpll", "isp",
+				      "drc", "fd", "mcuisp",
+				      "ispdiv0", "ispdiv1", "mcuispdiv0",
+				      "mcuispdiv1", "uart", "aclk200",
+				      "div_aclk200", "aclk400mcuisp",
+				      "div_aclk400mcuisp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			pmu {
+				reg = <0x10020000 0x3000>;
+			};
+
+			i2c1_isp: i2c-isp@12140000 {
+				compatible = "samsung,exynos4212-i2c-isp";
+				reg = <0x12140000 0x100>;
+				clocks = <&clock CLK_I2C1_ISP>;
+				clock-names = "i2c_isp";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	mshc_0: mmc@12550000 {
+		compatible = "samsung,exynos4412-dw-mshc";
+		reg = <0x12550000 0x1000>;
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		fifo-depth = <0x80>;
+		clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
+		clock-names = "biu", "ciu";
+		status = "disabled";
+	};
+
+	exynos-usbphy@125B0000 {
+		compatible = "samsung,exynos4x12-usb2-phy";
+		samsung,sysreg-phandle = <&sys_reg>;
+	};
+
+	tmu@100C0000 {
+		compatible = "samsung,exynos4412-tmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <2 4>;
+		reg = <0x100C0000 0x100>;
+		clocks = <&clock 383>;
+		clock-names = "tmu_apbif";
+		status = "disabled";
+	};
+};
diff --git a/src/arm/exynos5.dtsi b/src/arm/exynos5.dtsi
new file mode 100644
index 000000000000..a0cc0b6f8f96
--- /dev/null
+++ b/src/arm/exynos5.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Samsung's Exynos5 SoC series common device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular
+ * SoCs from Exynos5 series can include this file and provide values for SoCs
+ * specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		serial3 = &serial_3;
+	};
+
+	chipid@10000000 {
+		compatible = "samsung,exynos4210-chipid";
+		reg = <0x10000000 0x100>;
+	};
+
+	combiner: interrupt-controller@10440000 {
+		compatible = "samsung,exynos4210-combiner";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		samsung,combiner-nr = <32>;
+		reg = <0x10440000 0x1000>;
+		interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+				<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+				<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+				<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+				<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+	};
+
+	gic: interrupt-controller@10481000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg =	<0x10481000 0x1000>,
+			<0x10482000 0x1000>,
+			<0x10484000 0x2000>,
+			<0x10486000 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	serial_0: serial@12C00000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 51 0>;
+	};
+
+	serial_1: serial@12C10000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C10000 0x100>;
+		interrupts = <0 52 0>;
+	};
+
+	serial_2: serial@12C20000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C20000 0x100>;
+		interrupts = <0 53 0>;
+	};
+
+	serial_3: serial@12C30000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C30000 0x100>;
+		interrupts = <0 54 0>;
+	};
+
+	rtc@101E0000 {
+		compatible = "samsung,s3c6410-rtc";
+		reg = <0x101E0000 0x100>;
+		interrupts = <0 43 0>, <0 44 0>;
+		status = "disabled";
+	};
+
+	fimd@14400000 {
+		compatible = "samsung,exynos5250-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x14400000 0x40000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <18 4>, <18 5>, <18 6>;
+		samsung,sysreg = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	dp-controller@145B0000 {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145B0000 0x1000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/exynos5250-arndale.dts b/src/arm/exynos5250-arndale.dts
new file mode 100644
index 000000000000..7e728a1b5559
--- /dev/null
+++ b/src/arm/exynos5250-arndale.dts
@@ -0,0 +1,562 @@
+/*
+ * Samsung's Exynos5250 based Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+	model = "Insignal Arndale evaluation board based on EXYNOS5250";
+	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		menu {
+			label = "SW-TACT2";
+			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			gpio-key,wakeup;
+		};
+
+		home {
+			label = "SW-TACT3";
+			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			gpio-key,wakeup;
+		};
+
+		up {
+			label = "SW-TACT4";
+			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+			gpio-key,wakeup;
+		};
+
+		down {
+			label = "SW-TACT5";
+			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+			gpio-key,wakeup;
+		};
+
+		back {
+			label = "SW-TACT6";
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			gpio-key,wakeup;
+		};
+
+		wakeup {
+			label = "SW-TACT7";
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			gpio-key,wakeup;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		main_dc_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "MAIN_DC";
+		};
+
+		mmc_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "VDD_33ON_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
+			enable-active-high;
+		};
+
+		reg_hdmi_en: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdmi-en";
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	// SMSC USB3503 connected in hardware only mode as a PHY
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+
+		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+		connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dp {
+	status = "okay";
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <4>;
+};
+
+&fimd {
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+
+		timing0: timing@0 {
+			/* 2560x1600 DP panel */
+			clock-frequency = <50000>;
+			hactive = <2560>;
+			vactive = <1600>;
+			hfront-porch = <48>;
+			hback-porch = <80>;
+			hsync-len = <32>;
+			vback-porch = <16>;
+			vfront-porch = <8>;
+			vsync-len = <6>;
+		};
+	};
+};
+
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+	vdd-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+	samsung,i2c-slave-addr = <0x66>;
+
+	s5m8767_pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		vinb1-supply = <&main_dc_reg>;
+		vinb2-supply = <&main_dc_reg>;
+		vinb3-supply = <&main_dc_reg>;
+		vinb4-supply = <&main_dc_reg>;
+		vinb5-supply = <&main_dc_reg>;
+		vinb6-supply = <&main_dc_reg>;
+		vinb7-supply = <&main_dc_reg>;
+		vinb8-supply = <&main_dc_reg>;
+		vinb9-supply = <&main_dc_reg>;
+
+		vinl1-supply = <&buck7_reg>;
+		vinl2-supply = <&buck7_reg>;
+		vinl3-supply = <&buck7_reg>;
+		vinl4-supply = <&main_dc_reg>;
+		vinl5-supply = <&main_dc_reg>;
+		vinl6-supply = <&main_dc_reg>;
+		vinl7-supply = <&main_dc_reg>;
+		vinl8-supply = <&buck8_reg>;
+		vinl9-supply = <&buck8_reg>;
+
+		s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+		s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
+		                              <&gpd1 1 GPIO_ACTIVE_HIGH>,
+		                              <&gpd1 2 GPIO_ACTIVE_HIGH>;
+		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+		                             <&gpx2 4 GPIO_ACTIVE_HIGH>,
+		                             <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_1.0V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_28IO_DP_1.35V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD_COMMON1_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_IOPERI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD_EXT_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD_MPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_XPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD_COMMON2_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD_33ON_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				op_mode = <1>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD_COMMON3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_ABB2_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_USB_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDQ_C2C_W_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB0_3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_COMMON4_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDDQ_MMC2_3_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "VDD_33ON_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "EXT_33_OFF";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "EXT_28_OFF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "PVDD_LDO25";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				op_mode = <1>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "EXT_18_OFF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <912500>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_MEM_1.35V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1355000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "PVDD_BUCK7";
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "PVDD_BUCK8";
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VDD_33_OFF_EXT1";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3000000>;
+				op_mode = <1>;
+			};
+		};
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+
+	wm1811a@1a {
+		compatible = "wlf,wm1811";
+		reg = <0x1a>;
+
+		AVDD2-supply = <&main_dc_reg>;
+		CPVDD-supply = <&main_dc_reg>;
+		DBVDD1-supply = <&main_dc_reg>;
+		DBVDD2-supply = <&main_dc_reg>;
+		DBVDD3-supply = <&main_dc_reg>;
+		LDO1VDD-supply = <&main_dc_reg>;
+		SPKVDD1-supply = <&main_dc_reg>;
+		SPKVDD2-supply = <&main_dc_reg>;
+
+		wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x38>;
+
+	hdmiphy@38 {
+		compatible = "samsung,exynos4212-hdmiphy";
+		reg = <0x38>;
+	};
+};
+
+&i2c_9 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <40000>;
+	samsung,i2c-slave-addr = <0x38>;
+
+	sata_phy_i2c:sata-phy@38 {
+		compatible = "samsung,exynos-sataphy-i2c";
+		reg = <0x38>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	vmmc-supply = <&mmc_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	vmmc-supply = <&mmc_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
diff --git a/src/arm/exynos5250-pinctrl.dtsi b/src/arm/exynos5250-pinctrl.dtsi
new file mode 100644
index 000000000000..886cfca044ac
--- /dev/null
+++ b/src/arm/exynos5250-pinctrl.dtsi
@@ -0,0 +1,818 @@
+/*
+ * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa2: gpa2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb0: gpb0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb1: gpb1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb2: gpb2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb3: gpb3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc2: gpc2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc3: gpc3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpc4: gpc4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+				     <26 0>, <26 1>, <27 0>, <27 1>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+				     <30 0>, <30 1>, <31 0>, <31 1>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_hs_bus: i2c2-hs-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_fctl: uart2-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_bus: i2c3-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_hs_bus: i2c3-hs-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart3_data: uart3-data {
+			samsung,pins = "gpa1-4", "gpa1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_bus: i2c4-bus {
+			samsung,pins = "gpa2-0", "gpa2-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_bus: i2c5-bus {
+			samsung,pins = "gpa2-2", "gpa2-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		ac97_bus: ac97-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s2_bus: i2s2-bus {
+			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+					"gpb1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm2_bus: pcm2-bus {
+			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+					"gpb1-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif_bus: spdif-bus {
+			samsung,pins = "gpb1-0", "gpb1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+			samsung,pin-function = <5>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_bus: i2c6-bus {
+			samsung,pins = "gpb1-3", "gpb1-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm0_out: pwm0-out {
+			samsung,pins = "gpb2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm1_out: pwm1-out {
+			samsung,pins = "gpb2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm2_out: pwm2-out {
+			samsung,pins = "gpb2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm3_out: pwm3-out {
+			samsung,pins = "gpb2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_bus: i2c7-bus {
+			samsung,pins = "gpb2-2", "gpb2-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_bus: i2c0-bus {
+			samsung,pins = "gpb3-0", "gpb3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_bus: i2c1-bus {
+			samsung,pins = "gpb3-2", "gpb3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_hs_bus: i2c0-hs-bus {
+			samsung,pins = "gpb3-0", "gpb3-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_hs_bus: i2c1-hs-bus {
+			samsung,pins = "gpb3-2", "gpb3-3";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpc0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpc0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpc0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpc0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpc2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpc2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpc2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpc2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpc3-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpc3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpc3-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpc3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus8: sd2-bus-width8 {
+			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_clk: sd3-clk {
+			samsung,pins = "gpc4-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cmd: sd3-cmd {
+			samsung,pins = "gpc4-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cd: sd3-cd {
+			samsung,pins = "gpc4-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus1: sd3-bus-width1 {
+			samsung,pins = "gpc4-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus4: sd3-bus-width4 {
+			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpd0-0", "gpd0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpd0-2", "gpd0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		dp_hpd: dp_hpd {
+			samsung,pins = "gpx0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@13400000 {
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg0: gpg0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg1: gpg1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg2: gpg2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gph0: gph0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gph1: gph1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		cam_gpio_a: cam-gpio-a {
+			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+				       "gpe1-0", "gpe1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_gpio_b: cam-gpio-b {
+			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c2_bus: cam-i2c2-bus {
+			samsung,pins = "gpe0-6", "gpe1-0";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_spi1_bus: cam-spi1-bus {
+			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c1_bus: cam-i2c1-bus {
+			samsung,pins = "gpf0-2", "gpf0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c0_bus: cam-i2c0-bus {
+			samsung,pins = "gpf0-0", "gpf0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_spi0_bus: cam-spi0-bus {
+			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_bayrgb_bus: cam-bayrgb-bus {
+			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+				       "gpg2-0", "gpg2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a: cam-port-a {
+			samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
+				       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
+				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@10d10000 {
+		gpv0: gpv0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv1: gpv1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv2: gpv2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv3: gpv3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv4: gpv4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		c2c_rxd: c2c-rxd {
+			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+				       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+				       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		c2c_txd: c2c-txd {
+			samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+				       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+				       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2s0_bus: i2s0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4", "gpz-5", "gpz-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+};
diff --git a/src/arm/exynos5250-smdk5250.dts b/src/arm/exynos5250-smdk5250.dts
new file mode 100644
index 000000000000..bc27cc2558fe
--- /dev/null
+++ b/src/arm/exynos5250-smdk5250.dts
@@ -0,0 +1,412 @@
+/*
+ * SAMSUNG SMDK5250 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos5250.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
+
+	aliases {
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+	};
+
+	vdd: fixed-regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	dbvdd: fixed-regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "dbvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	spkvdd: fixed-regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "spkvdd-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "samsung,smdk-wm8994";
+
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&wm8994>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+
+		codec_mclk: codec-mclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <16934000>;
+		};
+	};
+};
+
+&dp {
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <4>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	status = "okay";
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+
+		timing0: timing@0 {
+			/* 1280x800 */
+			clock-frequency = <50000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <4>;
+			hback-porch = <4>;
+			hsync-len = <4>;
+			vback-porch = <4>;
+			vfront-porch = <4>;
+			vsync-len = <4>;
+		};
+	};
+};
+
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+
+	eeprom@50 {
+		compatible = "samsung,s524ad0xd1";
+		reg = <0x50>;
+	};
+
+	max77686@09 {
+		compatible = "maxim,max77686";
+		reg = <0x09>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.2V_LDO_OUT2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "P2.8V_LDO_OUT4";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "P1.8V_LDO_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "P1.1V_LDO_OUT6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "P1.8V_LDO_OUT11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "P1.8V_LDO_OUT13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+
+	eeprom@51 {
+		compatible = "samsung,s524ad0xd1";
+		reg = <0x51>;
+	};
+
+	wm8994: wm8994@1a {
+		compatible = "wlf,wm8994";
+		reg = <0x1a>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		clocks = <&codec_mclk>;
+		clock-names = "MCLK1";
+
+		AVDD2-supply = <&vdd>;
+		CPVDD-supply = <&vdd>;
+		DBVDD-supply = <&dbvdd>;
+		SPKVDD1-supply = <&spkvdd>;
+		SPKVDD2-supply = <&spkvdd>;
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	hdmiphy@38 {
+		compatible = "samsung,exynos4212-hdmiphy";
+		reg = <0x38>;
+	};
+};
+
+&i2c_9 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <40000>;
+	samsung,i2c-slave-addr = <0x38>;
+
+	sata_phy_i2c: sata-phy@38 {
+		compatible = "samsung,exynos-sataphy-i2c";
+		reg = <0x38>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
+
+&spi_1 {
+	status = "okay";
+	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+
+	w25q80bw@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25x80";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0xc0000>;
+		};
+	};
+};
diff --git a/src/arm/exynos5250-snow.dts b/src/arm/exynos5250-snow.dts
new file mode 100644
index 000000000000..b9aeec430527
--- /dev/null
+++ b/src/arm/exynos5250-snow.dts
@@ -0,0 +1,651 @@
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+	model = "Google Snow";
+	compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
+
+	aliases {
+		i2c104 = &i2c_104;
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=tty1";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq &lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+
+	vbat: vbat-fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+	};
+
+	i2c-arbitrator {
+		compatible = "i2c-arb-gpio-challenge";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@12CA0000}>;
+
+		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+		slew-delay-us = <10>;
+		wait-retry-us = <3000>;
+		wait-free-us = <50000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
+
+		/* Use ID 104 as a hint that we're on physical bus 4 */
+		i2c_104: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+			};
+
+			cros_ec: embedded-controller {
+				compatible = "google,cros-ec-i2c";
+				reg = <0x1e>;
+				interrupts = <6 IRQ_TYPE_NONE>;
+				interrupt-parent = <&gpx1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&ec_irq>;
+				wakeup-source;
+			};
+
+			power-regulator {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					dcdc1 {
+						ti,enable-ext-control;
+					};
+					dcdc2 {
+						ti,enable-ext-control;
+					};
+					dcdc3 {
+						ti,enable-ext-control;
+					};
+					fet1: fet1 {
+						regulator-name = "vcd_led";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet4 {
+						regulator-name = "sdcard";
+						ti,overcurrent-wait = <3>;
+					};
+					fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet6: fet6 {
+						regulator-name = "lcd_vdd";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					ldo1 {
+					};
+					ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+
+	i2c@12CD0000 {
+		ptn3460: lvds-bridge@20 {
+			compatible = "nxp,ptn3460";
+			reg = <0x20>;
+			powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+			reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+			edid-emulation = <5>;
+			panel = <&panel>;
+		};
+	};
+
+	sound {
+		compatible = "google,snow-audio-max98095";
+
+		samsung,model = "Snow-I2S-MAX98095";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98095>;
+	};
+
+	usb3_vbus_reg: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_en>;
+		enable-active-high;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&fet1>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&fet6>;
+		backlight = <&backlight>;
+	};
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+	bridge = <&ptn3460>;
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	phy = <&hdmiphy>;
+	ddc = <&i2c_2>;
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	max77686: max77686@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		wakeup-source;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.8V_LDO_OUT2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.35V_BUCK_OUT6";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "P2.0V_BUCK_OUT7";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "P2.85V_BUCK_OUT8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	trackpad {
+		reg = <0x67>;
+		compatible = "cypress,cyapa";
+		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx1>;
+		wakeup-source;
+	};
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+	samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	max98095: codec@11 {
+		compatible = "maxim,max98095";
+		reg = <0x11>;
+		pinctrl-0 = <&max98095_en>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	hdmiphy: hdmiphy@38 {
+		compatible = "samsung,exynos4212-hdmiphy";
+		reg = <0x38>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
+	cap-sd-highspeed;
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-3";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	max98095_en: max98095-en {
+		samsung,pins = "gpx1-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb3_vbus_en: usb3-vbus-en {
+		samsung,pins = "gpx2-7";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	arb_their_claim: arb-their-claim {
+		samsung,pins = "gpe0-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	arb_our_claim: arb-our-claim {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+	samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+	samsung,pin-pud = <3>;
+	samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+	status = "okay";
+	samsung,spi-src-clk = <0>;
+	num-cs = <1>;
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "host";
+};
+
+&usbdrd_phy {
+	vbus-supply = <&usb3_vbus_reg>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/exynos5250-spring.dts b/src/arm/exynos5250-spring.dts
new file mode 100644
index 000000000000..f02775487cd4
--- /dev/null
+++ b/src/arm/exynos5250-spring.dts
@@ -0,0 +1,566 @@
+/*
+ * Google Spring board device tree source
+ *
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+	model = "Google Spring";
+	compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=tty1";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq>, <&lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+
+	usb-hub {
+		compatible = "smsc,usb3503a";
+		reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsic_reset>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <1>;
+	samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	phy = <&hdmiphy>;
+	ddc = <&i2c_2>;
+	hdmi-en-supply = <&ldo8_reg>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	s5m8767-pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+		wakeup-source;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+		                              <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+		                              <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+		                             <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+		                             <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+		/*
+		 * The following arrays of DVS voltages are not used, since we are
+		 * not using GPIOs to control PMIC bucks, but they must be defined
+		 * to please the driver.
+		 */
+		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+		                                 <1250000>, <1200000>,
+		                                 <1150000>, <1100000>,
+		                                 <1000000>, <950000>;
+
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+		                                 <1100000>, <1100000>,
+		                                 <1000000>, <1000000>,
+		                                 <1000000>, <1000000>;
+
+		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+		                                 <1200000>, <1200000>,
+		                                 <1200000>, <1200000>,
+		                                 <1200000>, <1200000>;
+
+		clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "en32khz_ap",
+			                     "en32khz_cp",
+			                     "en32khz_bt";
+		};
+
+		regulators {
+			ldo4_reg: LDO4 {
+				regulator-name = "P1.0V_LDO_OUT4";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "P1.0V_LDO_OUT5";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_mydp";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "P1.8V_LDO_OUT11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "P1.8V_LDO_OUT13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <3>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "P2.8V_LDO_OUT17";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <0>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "vdd_bridge";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <1>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.2V_BUCK_OUT6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <0>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_ummc";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <3>;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	trackpad@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpx1>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
+		linux,gpio-keymap = <KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED
+				     BTN_LEFT>;
+		wakeup-source;
+	};
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+	samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	cros_ec: embedded-controller {
+		compatible = "google,cros-ec-i2c";
+		reg = <0x1e>;
+		interrupts = <6 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx1>;
+		wakeup-source;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_irq>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	temperature-sensor@4c {
+		compatible = "gmt,g781";
+		reg = <0x4c>;
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	hdmiphy: hdmiphy@38 {
+		compatible = "samsung,exynos4212-hdmiphy";
+		reg = <0x38>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+/*
+ * On Spring we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_1 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl_0 {
+	s5m8767_dvs: s5m8767-dvs {
+		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd_gpio: dp-hpd-gpio {
+		samsung,pins = "gpc3-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	trackpad_irq: trackpad-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-3";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	s5m8767_ds: s5m8767-ds {
+		samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	s5m8767_irq: s5m8767-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	hsic_reset: hsic-reset {
+		samsung,pins = "gpe1-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&sd1_bus4 {
+	samsung,pin-drv = <0>;
+};
+
+&sd1_cd {
+	samsung,pin-drv = <0>;
+};
+
+&sd1_clk {
+	samsung,pin-drv = <0>;
+};
+
+&sd1_cmd {
+	samsung,pin-pud = <3>;
+	samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+	status = "okay";
+	samsung,spi-src-clk = <0>;
+	num-cs = <1>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/exynos5250.dtsi b/src/arm/exynos5250.dtsi
new file mode 100644
index 000000000000..9bb1b0b738f5
--- /dev/null
+++ b/src/arm/exynos5250.dtsi
@@ -0,0 +1,776 @@
+/*
+ * SAMSUNG EXYNOS5250 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
+ * EXYNOS5250 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
+ * additional nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/clock/exynos5250.h>
+#include "exynos5.dtsi"
+#include "exynos5250-pinctrl.dtsi"
+
+#include <dt-bindings/clock/exynos-audss-clk.h>
+
+/ {
+	compatible = "samsung,exynos5250", "samsung,exynos5";
+
+	aliases {
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		gsc2 = &gsc_2;
+		gsc3 = &gsc_3;
+		mshc0 = &mmc_0;
+		mshc1 = &mmc_1;
+		mshc2 = &mmc_2;
+		mshc3 = &mmc_3;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+		i2c8 = &i2c_8;
+		i2c9 = &i2c_9;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1700000000>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1700000000>;
+		};
+	};
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x30000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x30000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@2f000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x2f000 0x1000>;
+		};
+	};
+
+	pd_gsc: gsc-power-domain@10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	pd_mfc: mfc-power-domain@10044040 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044040 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	clock: clock-controller@10010000 {
+		compatible = "samsung,exynos5250-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
+	clock_audss: audss-clock-controller@3810000 {
+		compatible = "samsung,exynos5250-audss-clock";
+		reg = <0x03810000 0x0C>;
+		#clock-cells = <1>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+			 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
+		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		/* Unfortunately we need this since some versions of U-Boot
+		 * on Exynos don't set the CNTFRQ register, so we need the
+		 * value from DT.
+		 */
+		clock-frequency = <24000000>;
+	};
+
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &combiner 23 3>,
+					<0x1 0 &combiner 23 4>,
+					<0x2 0 &combiner 25 2>,
+					<0x3 0 &combiner 25 3>,
+					<0x4 0 &gic 0 120 0>,
+					<0x5 0 &gic 0 121 0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <1 2>, <22 4>;
+	};
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 46 0>;
+
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_1: pinctrl@13400000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x13400000 0x1000>;
+		interrupts = <0 45 0>;
+	};
+
+	pinctrl_2: pinctrl@10d10000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x10d10000 0x1000>;
+		interrupts = <0 50 0>;
+	};
+
+	pinctrl_3: pinctrl@03860000 {
+		compatible = "samsung,exynos5250-pinctrl";
+		reg = <0x03860000 0x1000>;
+		interrupts = <0 47 0>;
+	};
+
+	pmu_system_controller: system-controller@10040000 {
+		compatible = "samsung,exynos5250-pmu", "syscon";
+		reg = <0x10040000 0x5000>;
+		clock-names = "clkout16";
+		clocks = <&clock CLK_FIN_PLL>;
+		#clock-cells = <1>;
+	};
+
+	sysreg_system_controller: syscon@10050000 {
+		compatible = "samsung,exynos5-sysreg", "syscon";
+		reg = <0x10050000 0x5000>;
+	};
+
+	watchdog@101D0000 {
+		compatible = "samsung,exynos5250-wdt";
+		reg = <0x101D0000 0x100>;
+		interrupts = <0 42 0>;
+		clocks = <&clock CLK_WDT>;
+		clock-names = "watchdog";
+		samsung,syscon-phandle = <&pmu_system_controller>;
+	};
+
+	g2d@10850000 {
+		compatible = "samsung,exynos5250-g2d";
+		reg = <0x10850000 0x1000>;
+		interrupts = <0 91 0>;
+		clocks = <&clock CLK_G2D>;
+		clock-names = "fimg2d";
+	};
+
+	mfc: codec@11000000 {
+		compatible = "samsung,mfc-v6";
+		reg = <0x11000000 0x10000>;
+		interrupts = <0 96 0>;
+		power-domains = <&pd_mfc>;
+		clocks = <&clock CLK_MFC>;
+		clock-names = "mfc";
+	};
+
+	rtc: rtc@101E0000 {
+		clocks = <&clock CLK_RTC>;
+		clock-names = "rtc";
+		status = "disabled";
+	};
+
+	tmu@10060000 {
+		compatible = "samsung,exynos5250-tmu";
+		reg = <0x10060000 0x100>;
+		interrupts = <0 65 0>;
+		clocks = <&clock CLK_TMU>;
+		clock-names = "tmu_apbif";
+	};
+
+	serial@12C00000 {
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	serial@12C10000 {
+		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	serial@12C20000 {
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	serial@12C30000 {
+		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	sata: sata@122F0000 {
+		compatible = "snps,dwc-ahci";
+		samsung,sata-freq = <66>;
+		reg = <0x122F0000 0x1ff>;
+		interrupts = <0 115 0>;
+		clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
+		clock-names = "sata", "sclk_sata";
+		phys = <&sata_phy>;
+		phy-names = "sata-phy";
+		status = "disabled";
+	};
+
+	sata_phy: sata-phy@12170000 {
+		compatible = "samsung,exynos5250-sata-phy";
+		reg = <0x12170000 0x1ff>;
+		clocks = <&clock CLK_SATA_PHYCTRL>;
+		clock-names = "sata_phyctrl";
+		#phy-cells = <0>;
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_0: i2c@12C60000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C60000 0x100>;
+		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C0>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_bus>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_1: i2c@12C70000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C70000 0x100>;
+		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C1>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_2: i2c@12C80000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C80000 0x100>;
+		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C2>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_3: i2c@12C90000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C90000 0x100>;
+		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C3>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_bus>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_4: i2c@12CA0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12CA0000 0x100>;
+		interrupts = <0 60 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C4>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_bus>;
+		status = "disabled";
+	};
+
+	i2c_5: i2c@12CB0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12CB0000 0x100>;
+		interrupts = <0 61 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C5>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_bus>;
+		status = "disabled";
+	};
+
+	i2c_6: i2c@12CC0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12CC0000 0x100>;
+		interrupts = <0 62 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C6>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_bus>;
+		status = "disabled";
+	};
+
+	i2c_7: i2c@12CD0000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12CD0000 0x100>;
+		interrupts = <0 63 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C7>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_bus>;
+		status = "disabled";
+	};
+
+	i2c_8: i2c@12CE0000 {
+		compatible = "samsung,s3c2440-hdmiphy-i2c";
+		reg = <0x12CE0000 0x1000>;
+		interrupts = <0 64 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C_HDMI>;
+		clock-names = "i2c";
+		status = "disabled";
+	};
+
+	i2c_9: i2c@121D0000 {
+                compatible = "samsung,exynos5-sata-phy-i2c";
+                reg = <0x121D0000 0x100>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+		clocks = <&clock CLK_SATA_PHYI2C>;
+		clock-names = "i2c";
+		status = "disabled";
+	};
+
+	spi_0: spi@12d20000 {
+		compatible = "samsung,exynos4210-spi";
+		status = "disabled";
+		reg = <0x12d20000 0x100>;
+		interrupts = <0 66 0>;
+		dmas = <&pdma0 5
+			&pdma0 4>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_bus>;
+	};
+
+	spi_1: spi@12d30000 {
+		compatible = "samsung,exynos4210-spi";
+		status = "disabled";
+		reg = <0x12d30000 0x100>;
+		interrupts = <0 67 0>;
+		dmas = <&pdma1 5
+			&pdma1 4>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_bus>;
+	};
+
+	spi_2: spi@12d40000 {
+		compatible = "samsung,exynos4210-spi";
+		status = "disabled";
+		reg = <0x12d40000 0x100>;
+		interrupts = <0 68 0>;
+		dmas = <&pdma0 7
+			&pdma0 6>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+		clock-names = "spi", "spi_busclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_bus>;
+	};
+
+	mmc_0: mmc@12200000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12200000 0x1000>;
+		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x80>;
+		status = "disabled";
+	};
+
+	mmc_1: mmc@12210000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 76 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12210000 0x1000>;
+		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x80>;
+		status = "disabled";
+	};
+
+	mmc_2: mmc@12220000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12220000 0x1000>;
+		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x80>;
+		status = "disabled";
+	};
+
+	mmc_3: mmc@12230000 {
+		compatible = "samsung,exynos5250-dw-mshc";
+		reg = <0x12230000 0x1000>;
+		interrupts = <0 78 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x80>;
+		status = "disabled";
+	};
+
+	i2s0: i2s@03830000 {
+		compatible = "samsung,s5pv210-i2s";
+		status = "disabled";
+		reg = <0x03830000 0x100>;
+		dmas = <&pdma0 10
+			&pdma0 9
+			&pdma0 8>;
+		dma-names = "tx", "rx", "tx-sec";
+		clocks = <&clock_audss EXYNOS_I2S_BUS>,
+			<&clock_audss EXYNOS_I2S_BUS>,
+			<&clock_audss EXYNOS_SCLK_I2S>;
+		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+		samsung,idma-addr = <0x03000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+	};
+
+	i2s1: i2s@12D60000 {
+		compatible = "samsung,s3c6410-i2s";
+		status = "disabled";
+		reg = <0x12D60000 0x100>;
+		dmas = <&pdma1 12
+			&pdma1 11>;
+		dma-names = "tx", "rx";
+		clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
+		clock-names = "iis", "i2s_opclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_bus>;
+	};
+
+	i2s2: i2s@12D70000 {
+		compatible = "samsung,s3c6410-i2s";
+		status = "disabled";
+		reg = <0x12D70000 0x100>;
+		dmas = <&pdma0 12
+			&pdma0 11>;
+		dma-names = "tx", "rx";
+		clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
+		clock-names = "iis", "i2s_opclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2_bus>;
+	};
+
+	usb@12000000 {
+		compatible = "samsung,exynos5250-dwusb3";
+		clocks = <&clock CLK_USB3>;
+		clock-names = "usbdrd30";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usbdrd_dwc3: dwc3 {
+			compatible = "synopsys,dwc3";
+			reg = <0x12000000 0x10000>;
+			interrupts = <0 72 0>;
+			phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+			phy-names = "usb2-phy", "usb3-phy";
+		};
+	};
+
+	usbdrd_phy: phy@12100000 {
+		compatible = "samsung,exynos5250-usbdrd-phy";
+		reg = <0x12100000 0x100>;
+		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
+		clock-names = "phy", "ref";
+		samsung,pmu-syscon = <&pmu_system_controller>;
+		#phy-cells = <1>;
+	};
+
+	ehci: usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock CLK_USB2>;
+		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy_gen 1>;
+		};
+	};
+
+	ohci: usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock CLK_USB2>;
+		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy_gen 1>;
+		};
+	};
+
+	usb2_phy_gen: phy@12130000 {
+		compatible = "samsung,exynos5250-usb2-phy";
+		reg = <0x12130000 0x100>;
+		clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
+		clock-names = "phy", "ref";
+		#phy-cells = <1>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		samsung,pmureg-phandle = <&pmu_system_controller>;
+	};
+
+	pwm: pwm@12dd0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x12dd0000 0x100>;
+		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+		#pwm-cells = <3>;
+		clocks = <&clock CLK_PWM>;
+		clock-names = "timers";
+	};
+
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		pdma0: pdma@121A0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121A0000 0x1000>;
+			interrupts = <0 34 0>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@121B0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121B0000 0x1000>;
+			interrupts = <0 35 0>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		mdma0: mdma@10800000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10800000 0x1000>;
+			interrupts = <0 33 0>;
+			clocks = <&clock CLK_MDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		mdma1: mdma@11C10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x11C10000 0x1000>;
+			interrupts = <0 124 0>;
+			clocks = <&clock CLK_MDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+	};
+
+	gsc_0:  gsc@13e00000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e00000 0x1000>;
+		interrupts = <0 85 0>;
+		power-domains = <&pd_gsc>;
+		clocks = <&clock CLK_GSCL0>;
+		clock-names = "gscl";
+	};
+
+	gsc_1:  gsc@13e10000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e10000 0x1000>;
+		interrupts = <0 86 0>;
+		power-domains = <&pd_gsc>;
+		clocks = <&clock CLK_GSCL1>;
+		clock-names = "gscl";
+	};
+
+	gsc_2:  gsc@13e20000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e20000 0x1000>;
+		interrupts = <0 87 0>;
+		power-domains = <&pd_gsc>;
+		clocks = <&clock CLK_GSCL2>;
+		clock-names = "gscl";
+	};
+
+	gsc_3:  gsc@13e30000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e30000 0x1000>;
+		interrupts = <0 88 0>;
+		power-domains = <&pd_gsc>;
+		clocks = <&clock CLK_GSCL3>;
+		clock-names = "gscl";
+	};
+
+	hdmi: hdmi {
+		compatible = "samsung,exynos4212-hdmi";
+		reg = <0x14530000 0x70000>;
+		interrupts = <0 95 0>;
+		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+			 <&clock CLK_MOUT_HDMI>;
+		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+				"sclk_hdmiphy", "mout_hdmi";
+		samsung,syscon-phandle = <&pmu_system_controller>;
+	};
+
+	mixer {
+		compatible = "samsung,exynos5250-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
+		clock-names = "mixer", "sclk_hdmi";
+	};
+
+	dp_phy: video-phy@10040720 {
+		compatible = "samsung,exynos5250-dp-video-phy";
+		samsung,pmu-syscon = <&pmu_system_controller>;
+		#phy-cells = <0>;
+	};
+
+	dp: dp-controller@145B0000 {
+		clocks = <&clock CLK_DP>;
+		clock-names = "dp";
+		phys = <&dp_phy>;
+		phy-names = "dp";
+	};
+
+	fimd: fimd@14400000 {
+		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+		clock-names = "sclk_fimd", "fimd";
+	};
+
+	adc: adc@12D10000 {
+		compatible = "samsung,exynos-adc-v1";
+		reg = <0x12D10000 0x100>;
+		interrupts = <0 106 0>;
+		clocks = <&clock CLK_ADC>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		status = "disabled";
+	};
+
+	sss@10830000 {
+		compatible = "samsung,exynos4210-secss";
+		reg = <0x10830000 0x10000>;
+		interrupts = <0 112 0>;
+		clocks = <&clock CLK_SSS>;
+		clock-names = "secss";
+	};
+};
diff --git a/src/arm/exynos5260-pinctrl.dtsi b/src/arm/exynos5260-pinctrl.dtsi
new file mode 100644
index 000000000000..f6ee55ea0708
--- /dev/null
+++ b/src/arm/exynos5260-pinctrl.dtsi
@@ -0,0 +1,574 @@
+/*
+ * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define PIN_PULL_NONE	0
+#define PIN_PULL_DOWN	1
+#define PIN_PULL_UP	3
+
+&pinctrl_0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb3_vbus0_en: usb3-vbus0-en {
+		samsung,pins = "gpa2-4";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+				"gpb0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+				"gpb0-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif1_bus: spdif1-bus {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_hs_bus: i2c0-hs-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_hs_bus: i2c1-hs-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_hs_bus: i2c2-hs-bus {
+		samsung,pins = "gpb3-4", "gpb3-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_hs_bus: i2c3-hs-bus {
+		samsung,pins = "gpb3-6", "gpb3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_bus: i2c4-bus {
+		samsung,pins = "gpb4-0", "gpb4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_bus: i2c5-bus {
+		samsung,pins = "gpb4-2", "gpb4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_bus: i2c6-bus {
+		samsung,pins = "gpb4-4", "gpb4-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_bus: i2c7-bus {
+		samsung,pins = "gpb4-6", "gpb4-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c8_bus: i2c8-bus {
+		samsung,pins = "gpb5-0", "gpb5-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c9_bus: i2c9-bus {
+		samsung,pins = "gpb5-2", "gpb5-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c10_bus: i2c10-bus {
+		samsung,pins = "gpb5-4", "gpb5-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c11_bus: i2c11-bus {
+		samsung,pins = "gpb5-6", "gpb5-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_a: cam-gpio-a {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			"gpe1-0", "gpe1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_gpio_b: cam-gpio-b {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus {
+		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_rdqs: sd0-rdqs {
+		samsung,pins = "gpc0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpc1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpc1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+		samsung,pin-drv = <3>;
+	};
+};
+
+&pinctrl_2 {
+	gpz0: gpz0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpz1: gpz1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/src/arm/exynos5260-xyref5260.dts b/src/arm/exynos5260-xyref5260.dts
new file mode 100644
index 000000000000..a803b605051b
--- /dev/null
+++ b/src/arm/exynos5260-xyref5260.dts
@@ -0,0 +1,95 @@
+/*
+ * SAMSUNG XYREF5260 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5260.dtsi"
+
+/ {
+	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
+	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	xrtcxti: xrtcxti {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xrtcxti";
+		#clock-cells = <0>;
+	};
+};
+
+&pinctrl_0 {
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	bypass-smu;
+	cap-mmc-highspeed;
+	supports-hs200-mode; /* 200 Mhz */
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	disable-wp;
+};
diff --git a/src/arm/exynos5260.dtsi b/src/arm/exynos5260.dtsi
new file mode 100644
index 000000000000..36da38e29000
--- /dev/null
+++ b/src/arm/exynos5260.dtsi
@@ -0,0 +1,313 @@
+/*
+ * SAMSUNG EXYNOS5260 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/exynos5260-clk.h>
+
+/ {
+	compatible = "samsung,exynos5260", "samsung,exynos5";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			cci-control-port = <&cci_control0>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clock_top: clock-controller@10010000 {
+			compatible = "samsung,exynos5260-clock-top";
+			reg = <0x10010000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_peri: clock-controller@10200000 {
+			compatible = "samsung,exynos5260-clock-peri";
+			reg = <0x10200000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_egl: clock-controller@10600000 {
+			compatible = "samsung,exynos5260-clock-egl";
+			reg = <0x10600000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_kfc: clock-controller@10700000 {
+			compatible = "samsung,exynos5260-clock-kfc";
+			reg = <0x10700000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_g2d: clock-controller@10A00000 {
+			compatible = "samsung,exynos5260-clock-g2d";
+			reg = <0x10A00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_mif: clock-controller@10CE0000 {
+			compatible = "samsung,exynos5260-clock-mif";
+			reg = <0x10CE0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_mfc: clock-controller@11090000 {
+			compatible = "samsung,exynos5260-clock-mfc";
+			reg = <0x11090000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_g3d: clock-controller@11830000 {
+			compatible = "samsung,exynos5260-clock-g3d";
+			reg = <0x11830000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_fsys: clock-controller@122E0000 {
+			compatible = "samsung,exynos5260-clock-fsys";
+			reg = <0x122E0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_aud: clock-controller@128C0000 {
+			compatible = "samsung,exynos5260-clock-aud";
+			reg = <0x128C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_isp: clock-controller@133C0000 {
+			compatible = "samsung,exynos5260-clock-isp";
+			reg = <0x133C0000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_gscl: clock-controller@13F00000 {
+			compatible = "samsung,exynos5260-clock-gscl";
+			reg = <0x13F00000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_disp: clock-controller@14550000 {
+			compatible = "samsung,exynos5260-clock-disp";
+			reg = <0x14550000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+				<0x10482000 0x1000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		chipid: chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		mct: mct@100B0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x100B0000 0x1000>;
+			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+					<0 107 0>, <0 122 0>, <0 123 0>,
+					<0 124 0>, <0 125 0>, <0 126 0>,
+					<0 127 0>, <0 128 0>, <0 129 0>;
+		};
+
+		cci: cci@10F00000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10F00000 0x1000>;
+			ranges = <0x0 0x10F00000 0x6000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11600000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x11600000 0x1000>;
+			interrupts = <0 79 0>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 32 0>;
+			};
+		};
+
+		pinctrl_1: pinctrl@12290000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x12290000 0x1000>;
+			interrupts = <0 157 0>;
+		};
+
+		pinctrl_2: pinctrl@128B0000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x128B0000 0x1000>;
+			interrupts = <0 243 0>;
+		};
+
+		pmu_system_controller: system-controller@10D50000 {
+			compatible = "samsung,exynos5260-pmu", "syscon";
+			reg = <0x10D50000 0x10000>;
+		};
+
+		uart0: serial@12C00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C00000 0x100>;
+			interrupts = <0 146 0>;
+			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart1: serial@12C10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C10000 0x100>;
+			interrupts = <0 147 0>;
+			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart2: serial@12C20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C20000 0x100>;
+			interrupts = <0 148 0>;
+			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart3: serial@12860000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12860000 0x100>;
+			interrupts = <0 145 0>;
+			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		mmc_0: mmc@12140000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12140000 0x2000>;
+			interrupts = <0 156 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@12150000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12150000 0x2000>;
+			interrupts = <0 158 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@12160000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12160000 0x2000>;
+			interrupts = <0 159 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynos5260-pinctrl.dtsi"
diff --git a/src/arm/exynos5410-smdk5410.dts b/src/arm/exynos5410-smdk5410.dts
new file mode 100644
index 000000000000..be3e02530b42
--- /dev/null
+++ b/src/arm/exynos5410-smdk5410.dts
@@ -0,0 +1,74 @@
+/*
+ * SAMSUNG SMDK5410 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+/ {
+	model = "Samsung SMDK5410 board based on EXYNOS5410";
+	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	firmware@02037000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02037000 0x1000>;
+	};
+
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	cap-mmc-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <4>;
+	disable-wp;
+};
+
+&uart0 {
+		status = "okay";
+};
+
+&uart1 {
+		status = "okay";
+};
+
+&uart2 {
+		status = "okay";
+};
diff --git a/src/arm/exynos5410.dtsi b/src/arm/exynos5410.dtsi
new file mode 100644
index 000000000000..731eefd23fa9
--- /dev/null
+++ b/src/arm/exynos5410.dtsi
@@ -0,0 +1,221 @@
+/*
+ * SAMSUNG EXYNOS5410 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
+ * EXYNOS5410 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos5410.h>
+
+/ {
+	compatible = "samsung,exynos5410", "samsung,exynos5";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clock-frequency = <1600000000>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clock-frequency = <1600000000>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clock-frequency = <1600000000>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clock-frequency = <1600000000>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		combiner: interrupt-controller@10440000 {
+			compatible = "samsung,exynos4210-combiner";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			samsung,combiner-nr = <32>;
+			reg = <0x10440000 0x1000>;
+			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg =	<0x10481000 0x1000>,
+				<0x10482000 0x1000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <1 9 0xf04>;
+		};
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5410-pmu", "syscon";
+			reg = <0x10040000 0x5000>;
+		};
+
+		mct: mct@101C0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101C0000 0xB00>;
+			interrupt-parent = <&interrupt_map>;
+			interrupts = <0>, <1>, <2>, <3>,
+				<4>, <5>, <6>, <7>,
+				<8>, <9>, <10>, <11>;
+			clocks = <&fin_pll>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+
+			interrupt_map: interrupt-map {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &combiner 23 3>,
+						<1 &combiner 23 4>,
+						<2 &combiner 25 2>,
+						<3 &combiner 25 3>,
+						<4 &gic 0 120 0>,
+						<5 &gic 0 121 0>,
+						<6 &gic 0 122 0>,
+						<7 &gic 0 123 0>,
+						<8 &gic 0 128 0>,
+						<9 &gic 0 129 0>,
+						<10 &gic 0 130 0>,
+						<11 &gic 0 131 0>;
+			};
+		};
+
+		sysram@02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x54000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x54000>;
+
+			smp-sysram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram@53000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x53000 0x1000>;
+			};
+		};
+
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5410-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
+
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12200000 0x1000>;
+			interrupts = <0 75 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12210000 0x1000>;
+			interrupts = <0 76 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12220000 0x1000>;
+			interrupts = <0 77 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
+
+		uart0: serial@12C00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C00000 0x100>;
+			interrupts = <0 51 0>;
+			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart1: serial@12C10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C10000 0x100>;
+			interrupts = <0 52 0>;
+			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart2: serial@12C20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12C20000 0x100>;
+			interrupts = <0 53 0>;
+			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/exynos5420-arndale-octa.dts b/src/arm/exynos5420-arndale-octa.dts
new file mode 100644
index 000000000000..db2c1c4cd900
--- /dev/null
+++ b/src/arm/exynos5420-arndale-octa.dts
@@ -0,0 +1,378 @@
+/*
+ * Samsung's Exynos5420 based Arndale Octa board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
+	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC3,115200";
+	};
+
+	firmware@02073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	rtc@101E0000 {
+		status = "okay";
+	};
+
+	codec@11000000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+	};
+
+	mmc@12200000 {
+		status = "okay";
+		broken-cd;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <0 4>;
+		samsung,dw-mshc-ddr-timing = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+		vmmc-supply = <&ldo10_reg>;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+	};
+
+	mmc@12220000 {
+		status = "okay";
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		vmmc-supply = <&ldo19_reg>;
+		vqmmc-supply = <&ldo13_reg>;
+		bus-width = <4>;
+		cap-sd-highspeed;
+	};
+
+	hsi2c_4: i2c@12CA0000 {
+		status = "okay";
+
+		s2mps11_pmic@66 {
+			compatible = "samsung,s2mps11-pmic";
+			reg = <0x66>;
+			s2mps11,buck2-ramp-delay = <12>;
+			s2mps11,buck34-ramp-delay = <12>;
+			s2mps11,buck16-ramp-delay = <12>;
+			s2mps11,buck6-ramp-enable = <1>;
+			s2mps11,buck2-ramp-enable = <1>;
+			s2mps11,buck3-ramp-enable = <1>;
+			s2mps11,buck4-ramp-enable = <1>;
+
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+			s2mps11_osc: clocks {
+				#clock-cells = <1>;
+				clock-output-names = "s2mps11_ap",
+						"s2mps11_cp", "s2mps11_bt";
+			};
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "PVDD_ALIVE_1V0";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "PVDD_APIO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "PVDD_APIO_MMCON_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "PVDD_ADC_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "PVDD_PLL_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "PVDD_ANAIP_1V0";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "PVDD_ANAIP_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "PVDD_ABB_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "PVDD_USB_3V3";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "PVDD_PRE_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "PVDD_USB_1V0";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "PVDD_HSIC_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "PVDD_APIO_MMCOFF_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "PVDD_PERI_2V8";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "PVDD_PERI_3V3";
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+				};
+
+				ldo18_reg: LDO18 {
+					regulator-name = "PVDD_EMMC_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "PVDD_TFLASH_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo20_reg: LDO20 {
+					regulator-name = "PVDD_BTWIFI_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "PVDD_CAM1IO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo23_reg: LDO23 {
+					regulator-name = "PVDD_MIFS_1V1";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "PVDD_CAM1_AVDD_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo26_reg: LDO26 {
+					regulator-name = "PVDD_CAM0_AF_2V8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				ldo27_reg: LDO27 {
+					regulator-name = "PVDD_G3DS_1V0";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo28_reg: LDO28 {
+					regulator-name = "PVDD_TSP_3V3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo29_reg: LDO29 {
+					regulator-name = "PVDD_AUDIO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo31_reg: LDO31 {
+					regulator-name = "PVDD_PERI_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo32_reg: LDO32 {
+					regulator-name = "PVDD_LCD_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo33_reg: LDO33 {
+					regulator-name = "PVDD_CAM0IO_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo35_reg: LDO35 {
+					regulator-name = "PVDD_CAM0_DVDD_1V2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo38_reg: LDO38 {
+					regulator-name = "PVDD_CAM0_AVDD_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "PVDD_MIF_1V1";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "PVDD_INT_1V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "PVDD_G3D_1V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "PVDD_LPDDR3_1V2";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "PVDD_KFC_1V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "VIN_LLDO_1V4";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "VIN_MLDO_2V0";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "VIN_HLDO_3V5";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3500000>;
+					regulator-always-on;
+				};
+
+				buck10_reg: BUCK10 {
+					regulator-name = "PVDD_EMMCF_2V8";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		wakeup {
+			label = "SW-TACT1";
+			gpios = <&gpx2 7 1>;
+			linux,code = <KEY_WAKEUP>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&cci {
+	status = "disabled";
+};
diff --git a/src/arm/exynos5420-peach-pit.dts b/src/arm/exynos5420-peach-pit.dts
new file mode 100644
index 000000000000..c47bb70665c1
--- /dev/null
+++ b/src/arm/exynos5420-peach-pit.dts
@@ -0,0 +1,968 @@
+/*
+ * Google Peach Pit Rev 6+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
+#include "exynos5420.dtsi"
+
+/ {
+	model = "Google Peach Pit Rev 6+";
+
+	compatible = "google,pit-rev16",
+		"google,pit-rev15", "google,pit-rev14",
+		"google,pit-rev13", "google,pit-rev12",
+		"google,pit-rev11", "google,pit-rev10",
+		"google,pit-rev9", "google,pit-rev8",
+		"google,pit-rev7", "google,pit-rev6",
+		"google,pit", "google,peach","samsung,exynos5420",
+		"samsung,exynos5";
+
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		power-supply = <&tps65090_fet1>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq &lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	sound {
+		compatible = "google,snow-audio-max98090";
+
+		samsung,model = "Peach-Pit-I2S-MAX98090";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98090>;
+	};
+
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 1 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+
+	vbat: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&tps65090_fet6>;
+		backlight = <&backlight>;
+	};
+};
+
+&adc {
+	status = "okay";
+	vdd-supply = <&ldo9_reg>;
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x06>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx2 6 0>;
+	bridge = <&ps8625>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&hsi2c_4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	max77802: max77802-pmic@9 {
+		compatible = "maxim,max77802";
+		interrupt-parent = <&gpx3>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
+			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+		wakeup-source;
+		reg = <0x9>;
+		#clock-cells = <1>;
+
+		inb1-supply = <&tps65090_dcdc2>;
+		inb2-supply = <&tps65090_dcdc1>;
+		inb3-supply = <&tps65090_dcdc2>;
+		inb4-supply = <&tps65090_dcdc2>;
+		inb5-supply = <&tps65090_dcdc1>;
+		inb6-supply = <&tps65090_dcdc2>;
+		inb7-supply = <&tps65090_dcdc1>;
+		inb8-supply = <&tps65090_dcdc1>;
+		inb9-supply = <&tps65090_dcdc1>;
+		inb10-supply = <&tps65090_dcdc1>;
+
+		inl1-supply = <&buck5_reg>;
+		inl2-supply = <&buck7_reg>;
+		inl3-supply = <&buck9_reg>;
+		inl4-supply = <&buck9_reg>;
+		inl5-supply = <&buck9_reg>;
+		inl6-supply = <&tps65090_dcdc2>;
+		inl7-supply = <&buck9_reg>;
+		inl9-supply = <&tps65090_dcdc2>;
+		inl10-supply = <&buck7_reg>;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_1v2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_1v35";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_emmc";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_2v";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vdd_1v2_2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_1v8_3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			vqmmc_sdcard: ldo4_reg: LDO4 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_1v8_5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_1v8_6";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_1v8_7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd_ldo15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vdd_g3ds";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "ldo_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "ldo_19";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "ldo_20";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "ldo_21";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "ldo_23";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			ldo24_reg: LDO24 {
+				regulator-name = "ldo_24";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "ldo_25";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "ldo_26";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "ldo_27";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "ldo_28";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "ldo_29";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "vdd_mifs";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "ldo_32";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "ldo_33";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "ldo_34";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "ldo_35";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+	};
+};
+
+&hsi2c_7 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	max98090: codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98090_irq>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29018";
+		reg = <0x44>;
+		vcc-supply = <&tps65090_fet5>;
+	};
+
+	ps8625: lvds-bridge@48 {
+		compatible = "parade,ps8625";
+		reg = <0x48>;
+		sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
+		lane-count = <2>;
+		panel = <&panel>;
+		use-external-pwm;
+	};
+};
+
+&hsi2c_8 {
+	status = "okay";
+	clock-frequency = <333000>;
+
+	/* Atmel mXT336S */
+	trackpad@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpx1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
+		linux,gpio-keymap = <KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED	/* GPIO0 */
+				     KEY_RESERVED	/* GPIO1 */
+				     KEY_RESERVED	/* GPIO2 */
+				     BTN_LEFT>;		/* GPIO3 */
+	};
+};
+
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	mmc-hs200-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+};
+
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mask_tpm_reset>;
+
+	max98090_irq: max98090-irq {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	/* We need GPX0_6 to be low at sleep time; just keep it low always */
+	mask_tpm_reset: mask-tpm-reset {
+		samsung,pins = "gpx0-6";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+		samsung,pin-val = <0>;
+	};
+
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	trackpad_irq: trackpad-irq {
+		samsung,pins = "gpx1-1";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd_gpio: dp_hpd_gpio {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	max77802_irq: max77802-irq {
+		samsung,pins = "gpx3-1";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-4";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	pmic_dvs_1: pmic-dvs-1 {
+		samsung,pins = "gpy7-6";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_2 {
+	pmic_dvs_2: pmic-dvs-2 {
+		samsung,pins = "gpj4-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pmic_dvs_3: pmic-dvs-3 {
+		samsung,pins = "gpj4-3";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_3 {
+	/* Drive SPI lines at x2 for better integrity */
+	spi2-bus {
+		samsung,pin-drv = <2>;
+	};
+
+	/* Drive SPI chip select at x2 for better integrity */
+	ec_spi_cs: ec-spi-cs {
+		samsung,pins = "gpb1-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pmic_selb: pmic-selb {
+		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
+			       "gph0-6";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&spi_2 {
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 0>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_spi_cs &ec_irq>;
+		reg = <0>;
+		spi-max-frequency = <3125000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&tps65090_dcdc1>;
+				infet3-supply = <&tps65090_dcdc2>;
+				infet4-supply = <&tps65090_dcdc2>;
+				infet5-supply = <&tps65090_dcdc2>;
+				infet6-supply = <&tps65090_dcdc2>;
+				infet7-supply = <&tps65090_dcdc1>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
+&uart_3 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&usbdrd_phy0 {
+	vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+	vbus-supply = <&usb301_vbus_reg>;
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+	timeout-sec = <32>;
+};
+
+#include "cros-ec-keyboard.dtsi"
+#include "cros-adc-thermistors.dtsi"
diff --git a/src/arm/exynos5420-pinctrl.dtsi b/src/arm/exynos5420-pinctrl.dtsi
new file mode 100644
index 000000000000..ba686e40eac7
--- /dev/null
+++ b/src/arm/exynos5420-pinctrl.dtsi
@@ -0,0 +1,715 @@
+/*
+ * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@13400000 {
+		gpy7: gpy7 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+				     <26 0>, <26 1>, <27 0>, <27 1>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+				     <30 0>, <30 1>, <31 0>, <31 1>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		dp_hpd: dp_hpd {
+			samsung,pins = "gpx0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@13410000 {
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc2: gpc2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc3: gpc3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc4: gpc4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpc0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpc0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpc0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpc0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpc1-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpc1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpc1-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_int: sd1-int {
+			samsung,pins = "gpd1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpc1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus8: sd1-bus-width8 {
+			samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpc2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpc2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpc2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpc2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+	};
+
+	pinctrl@14000000 {
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg0: gpg0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg1: gpg1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg2: gpg2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj4: gpj4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		cam_gpio_a: cam-gpio-a {
+			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+				       "gpe1-0", "gpe1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_gpio_b: cam-gpio-b {
+			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c2_bus: cam-i2c2-bus {
+			samsung,pins = "gpf0-4", "gpf0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+		cam_spi1_bus: cam-spi1-bus {
+			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c1_bus: cam-i2c1-bus {
+			samsung,pins = "gpf0-2", "gpf0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_i2c0_bus: cam-i2c0-bus {
+			samsung,pins = "gpf0-0", "gpf0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_spi0_bus: cam-spi0-bus {
+			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_bayrgb_bus: cam-bayrgb-bus {
+			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+				       "gpg2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@14010000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa2: gpa2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb0: gpb0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb1: gpb1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb2: gpb2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb3: gpb3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb4: gpb4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gph0: gph0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa0-4", "gpa0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_fctl: uart2-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_bus: i2c3-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart3_data: uart3-data {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_hs_bus: i2c4-hs-bus {
+			samsung,pins = "gpa2-0", "gpa2-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_hs_bus: i2c5-hs-bus {
+			samsung,pins = "gpa2-2", "gpa2-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+					"gpb0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s2_bus: i2s2-bus {
+			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+					"gpb1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm2_bus: pcm2-bus {
+			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+					"gpb1-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif_bus: spdif-bus {
+			samsung,pins = "gpb1-0", "gpb1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+			samsung,pin-function = <5>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_hs_bus: i2c6-hs-bus {
+			samsung,pins = "gpb1-3", "gpb1-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm0_out: pwm0-out {
+			samsung,pins = "gpb2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm1_out: pwm1-out {
+			samsung,pins = "gpb2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm2_out: pwm2-out {
+			samsung,pins = "gpb2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm3_out: pwm3-out {
+			samsung,pins = "gpb2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_hs_bus: i2c7-hs-bus {
+			samsung,pins = "gpb2-2", "gpb2-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_bus: i2c0-bus {
+			samsung,pins = "gpb3-0", "gpb3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_bus: i2c1-bus {
+			samsung,pins = "gpb3-2", "gpb3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c8_hs_bus: i2c8-hs-bus {
+			samsung,pins = "gpb3-4", "gpb3-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c9_hs_bus: i2c9-hs-bus {
+			samsung,pins = "gpb3-6", "gpb3-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c10_hs_bus: i2c10-hs-bus {
+			samsung,pins = "gpb4-0", "gpb4-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2s0_bus: i2s0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4", "gpz-5", "gpz-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+};
diff --git a/src/arm/exynos5420-smdk5420.dts b/src/arm/exynos5420-smdk5420.dts
new file mode 100644
index 000000000000..8be3d7b489ff
--- /dev/null
+++ b/src/arm/exynos5420-smdk5420.dts
@@ -0,0 +1,419 @@
+/*
+ * SAMSUNG SMDK5420 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+
+/ {
+	model = "Samsung SMDK5420 board based on EXYNOS5420";
+	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200 init=/linuxrc";
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd: fixed-regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd-supply";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		dbvdd: fixed-regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "dbvdd-supply";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		spkvdd: fixed-regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "spkvdd-supply";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+
+	rtc@101E0000 {
+		status = "okay";
+	};
+
+	codec@11000000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+	};
+
+	mmc@12200000 {
+		status = "okay";
+		broken-cd;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <0 4>;
+		samsung,dw-mshc-ddr-timing = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+		bus-width = <8>;
+		cap-mmc-highspeed;
+	};
+
+	mmc@12220000 {
+		status = "okay";
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		bus-width = <4>;
+		cap-sd-highspeed;
+	};
+
+	dp-controller@145B0000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&dp_hpd>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+		status = "okay";
+	};
+
+	fimd@14400000 {
+		status = "okay";
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing@0 {
+				clock-frequency = <50000>;
+				hactive = <2560>;
+				vactive = <1600>;
+				hfront-porch = <48>;
+				hback-porch = <80>;
+				hsync-len = <32>;
+				vback-porch = <16>;
+				vfront-porch = <8>;
+				vsync-len = <6>;
+			};
+		};
+	};
+
+	pinctrl@13400000 {
+		hdmi_hpd_irq: hdmi-hpd-irq {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <1>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@14000000 {
+		usb300_vbus_en: usb300-vbus-en {
+			samsung,pins = "gpg0-5";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		usb301_vbus_en: usb301-vbus-en {
+			samsung,pins = "gpg1-4";
+			samsung,pin-function = <1>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	hdmi@14530000 {
+		status = "okay";
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_irq>;
+	};
+
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpg0 5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpg1 4 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+
+	phy@12100000 {
+		vbus-supply = <&usb300_vbus_reg>;
+	};
+
+	phy@12500000 {
+		vbus-supply = <&usb301_vbus_reg>;
+	};
+
+	i2c_2: i2c@12C80000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		status = "okay";
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos4210-hdmiddc";
+			reg = <0x50>;
+		};
+	};
+
+	hsi2c_4: i2c@12CA0000 {
+		status = "okay";
+
+		s2mps11_pmic@66 {
+			compatible = "samsung,s2mps11-pmic";
+			reg = <0x66>;
+			s2mps11,buck2-ramp-delay = <12>;
+			s2mps11,buck34-ramp-delay = <12>;
+			s2mps11,buck16-ramp-delay = <12>;
+			s2mps11,buck6-ramp-enable = <1>;
+			s2mps11,buck2-ramp-enable = <1>;
+			s2mps11,buck3-ramp-enable = <1>;
+			s2mps11,buck4-ramp-enable = <1>;
+
+			s2mps11_osc: clocks {
+				#clock-cells = <1>;
+				clock-output-names = "s2mps11_ap",
+						"s2mps11_cp", "s2mps11_bt";
+			};
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "vdd_ldo1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "vdd_ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "vdd_ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "vdd_ldo6";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "vdd_ldo7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "vdd_ldo8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "vdd_ldo9";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "vdd_ldo10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "vdd_ldo11";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "vdd_ldo12";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "vdd_ldo13";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "vdd_ldo15";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "vdd_ldo16";
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "tsp_avdd";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "vdd_sd";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "tsp_io";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "vdd_mem";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "vdd_kfc";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "vdd_1.0v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "vdd_1.8v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "vdd_2.8v_ldo";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3750000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck10_reg: BUCK10 {
+					regulator-name = "vdd_vmem";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/exynos5420.dtsi b/src/arm/exynos5420.dtsi
new file mode 100644
index 000000000000..9dc2e9773b30
--- /dev/null
+++ b/src/arm/exynos5420.dtsi
@@ -0,0 +1,927 @@
+/*
+ * SAMSUNG EXYNOS5420 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
+ * EXYNOS5420 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos5420.h>
+#include "exynos5.dtsi"
+#include "exynos5420-pinctrl.dtsi"
+
+#include <dt-bindings/clock/exynos-audss-clk.h>
+
+/ {
+	compatible = "samsung,exynos5420", "samsung,exynos5";
+
+	aliases {
+		mshc0 = &mmc_0;
+		mshc1 = &mmc_1;
+		mshc2 = &mmc_2;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+		pinctrl4 = &pinctrl_4;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
+		i2c8 = &hsi2c_8;
+		i2c9 = &hsi2c_9;
+		i2c10 = &hsi2c_10;
+		gsc0 = &gsc_0;
+		gsc1 = &gsc_1;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+		usbdrdphy0 = &usbdrd_phy0;
+		usbdrdphy1 = &usbdrd_phy1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+		};
+	};
+
+	cci: cci@10d20000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x10d20000 0x1000>;
+		ranges = <0x0 0x10d20000 0x6000>;
+
+		cci_control0: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+		cci_control1: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
+	sysram@02020000 {
+		compatible = "mmio-sram";
+		reg = <0x02020000 0x54000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x02020000 0x54000>;
+
+		smp-sysram@0 {
+			compatible = "samsung,exynos4210-sysram";
+			reg = <0x0 0x1000>;
+		};
+
+		smp-sysram@53000 {
+			compatible = "samsung,exynos4210-sysram-ns";
+			reg = <0x53000 0x1000>;
+		};
+	};
+
+	clock: clock-controller@10010000 {
+		compatible = "samsung,exynos5420-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
+	clock_audss: audss-clock-controller@3810000 {
+		compatible = "samsung,exynos5420-audss-clock";
+		reg = <0x03810000 0x0C>;
+		#clock-cells = <1>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
+			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
+		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+	};
+
+	mfc: codec@11000000 {
+		compatible = "samsung,mfc-v7";
+		reg = <0x11000000 0x10000>;
+		interrupts = <0 96 0>;
+		clocks = <&clock CLK_MFC>;
+		clock-names = "mfc";
+		power-domains = <&mfc_pd>;
+	};
+
+	mmc_0: mmc@12200000 {
+		compatible = "samsung,exynos5420-dw-mshc-smu";
+		interrupts = <0 75 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12200000 0x2000>;
+		clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x40>;
+		status = "disabled";
+	};
+
+	mmc_1: mmc@12210000 {
+		compatible = "samsung,exynos5420-dw-mshc-smu";
+		interrupts = <0 76 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12210000 0x2000>;
+		clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x40>;
+		status = "disabled";
+	};
+
+	mmc_2: mmc@12220000 {
+		compatible = "samsung,exynos5420-dw-mshc";
+		interrupts = <0 77 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x12220000 0x1000>;
+		clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x40>;
+		status = "disabled";
+	};
+
+	mct: mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <1>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
+				<8>, <9>, <10>, <11>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0 &combiner 23 3>,
+					<1 &combiner 23 4>,
+					<2 &combiner 25 2>,
+					<3 &combiner 25 3>,
+					<4 &gic 0 120 0>,
+					<5 &gic 0 121 0>,
+					<6 &gic 0 122 0>,
+					<7 &gic 0 123 0>,
+					<8 &gic 0 128 0>,
+					<9 &gic 0 129 0>,
+					<10 &gic 0 130 0>,
+					<11 &gic 0 131 0>;
+		};
+	};
+
+	gsc_pd: power-domain@10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	isp_pd: power-domain@10044020 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044020 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	mfc_pd: power-domain@10044060 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044060 0x20>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
+			<&clock CLK_MOUT_USER_ACLK333>;
+		clock-names = "oscclk", "pclk0", "clk0";
+		#power-domain-cells = <0>;
+	};
+
+	msc_pd: power-domain@10044120 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044120 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	disp_pd: power-domain@100440C0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x100440C0 0x20>;
+		#power-domain-cells = <0>;
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>,
+			 <&clock CLK_MOUT_USER_ACLK200_DISP1>,
+			 <&clock CLK_MOUT_SW_ACLK300>,
+			 <&clock CLK_MOUT_USER_ACLK300_DISP1>,
+			 <&clock CLK_MOUT_SW_ACLK400>,
+			 <&clock CLK_MOUT_USER_ACLK400_DISP1>;
+		clock-names = "oscclk", "pclk0", "clk0",
+			      "pclk1", "clk1", "pclk2", "clk2";
+	};
+
+	pinctrl_0: pinctrl@13400000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x13400000 0x1000>;
+		interrupts = <0 45 0>;
+
+		wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_1: pinctrl@13410000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x13410000 0x1000>;
+		interrupts = <0 78 0>;
+	};
+
+	pinctrl_2: pinctrl@14000000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x14000000 0x1000>;
+		interrupts = <0 46 0>;
+	};
+
+	pinctrl_3: pinctrl@14010000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x14010000 0x1000>;
+		interrupts = <0 50 0>;
+	};
+
+	pinctrl_4: pinctrl@03860000 {
+		compatible = "samsung,exynos5420-pinctrl";
+		reg = <0x03860000 0x1000>;
+		interrupts = <0 47 0>;
+	};
+
+	rtc: rtc@101E0000 {
+		clocks = <&clock CLK_RTC>;
+		clock-names = "rtc";
+		status = "disabled";
+	};
+
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		adma: adma@03880000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x03880000 0x1000>;
+			interrupts = <0 110 0>;
+			clocks = <&clock_audss EXYNOS_ADMA>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <6>;
+			#dma-requests = <16>;
+		};
+
+		pdma0: pdma@121A0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121A0000 0x1000>;
+			interrupts = <0 34 0>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@121B0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121B0000 0x1000>;
+			interrupts = <0 35 0>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		mdma0: mdma@10800000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10800000 0x1000>;
+			interrupts = <0 33 0>;
+			clocks = <&clock CLK_MDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		mdma1: mdma@11C10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x11C10000 0x1000>;
+			interrupts = <0 124 0>;
+			clocks = <&clock CLK_MDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+			/*
+			 * MDMA1 can support both secure and non-secure
+			 * AXI transactions. When this is enabled in the kernel
+			 * for boards that run in secure mode, we are getting
+			 * imprecise external aborts causing the kernel to oops.
+			 */
+			status = "disabled";
+		};
+	};
+
+	i2s0: i2s@03830000 {
+		compatible = "samsung,exynos5420-i2s";
+		reg = <0x03830000 0x100>;
+		dmas = <&adma 0
+			&adma 2
+			&adma 1>;
+		dma-names = "tx", "rx", "tx-sec";
+		clocks = <&clock_audss EXYNOS_I2S_BUS>,
+			<&clock_audss EXYNOS_I2S_BUS>,
+			<&clock_audss EXYNOS_SCLK_I2S>;
+		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+		samsung,idma-addr = <0x03000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		status = "disabled";
+	};
+
+	i2s1: i2s@12D60000 {
+		compatible = "samsung,exynos5420-i2s";
+		reg = <0x12D60000 0x100>;
+		dmas = <&pdma1 12
+			&pdma1 11>;
+		dma-names = "tx", "rx";
+		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
+		clock-names = "iis", "i2s_opclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_bus>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@12D70000 {
+		compatible = "samsung,exynos5420-i2s";
+		reg = <0x12D70000 0x100>;
+		dmas = <&pdma0 12
+			&pdma0 11>;
+		dma-names = "tx", "rx";
+		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
+		clock-names = "iis", "i2s_opclk0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2_bus>;
+		status = "disabled";
+	};
+
+	spi_0: spi@12d20000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x12d20000 0x100>;
+		interrupts = <0 68 0>;
+		dmas = <&pdma0 5
+			&pdma0 4>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_bus>;
+		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+		clock-names = "spi", "spi_busclk0";
+		status = "disabled";
+	};
+
+	spi_1: spi@12d30000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x12d30000 0x100>;
+		interrupts = <0 69 0>;
+		dmas = <&pdma1 5
+			&pdma1 4>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_bus>;
+		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+		clock-names = "spi", "spi_busclk0";
+		status = "disabled";
+	};
+
+	spi_2: spi@12d40000 {
+		compatible = "samsung,exynos4210-spi";
+		reg = <0x12d40000 0x100>;
+		interrupts = <0 70 0>;
+		dmas = <&pdma0 7
+			&pdma0 6>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_bus>;
+		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+		clock-names = "spi", "spi_busclk0";
+		status = "disabled";
+	};
+
+	uart_0: serial@12C00000 {
+		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	uart_1: serial@12C10000 {
+		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	uart_2: serial@12C20000 {
+		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	uart_3: serial@12C30000 {
+		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	pwm: pwm@12dd0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x12dd0000 0x100>;
+		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+		#pwm-cells = <3>;
+		clocks = <&clock CLK_PWM>;
+		clock-names = "timers";
+	};
+
+	dp_phy: video-phy@10040728 {
+		compatible = "samsung,exynos5420-dp-video-phy";
+		samsung,pmu-syscon = <&pmu_system_controller>;
+		#phy-cells = <0>;
+	};
+
+	dp: dp-controller@145B0000 {
+		clocks = <&clock CLK_DP1>;
+		clock-names = "dp";
+		phys = <&dp_phy>;
+		phy-names = "dp";
+	};
+
+	mipi_phy: video-phy@10040714 {
+		compatible = "samsung,s5pv210-mipi-video-phy";
+		reg = <0x10040714 12>;
+		#phy-cells = <1>;
+	};
+
+	dsi@14500000 {
+		compatible = "samsung,exynos5410-mipi-dsi";
+		reg = <0x14500000 0x10000>;
+		interrupts = <0 82 0>;
+		phys = <&mipi_phy 1>;
+		phy-names = "dsim";
+		clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
+		clock-names = "bus_clk", "pll_clk";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	fimd: fimd@14400000 {
+		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+		clock-names = "sclk_fimd", "fimd";
+		power-domains = <&disp_pd>;
+	};
+
+	adc: adc@12D10000 {
+		compatible = "samsung,exynos-adc-v2";
+		reg = <0x12D10000 0x100>;
+		interrupts = <0 106 0>;
+		clocks = <&clock CLK_TSADC>;
+		clock-names = "adc";
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_0: i2c@12C60000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C60000 0x100>;
+		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C0>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_bus>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_1: i2c@12C70000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C70000 0x100>;
+		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C1>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_bus>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_2: i2c@12C80000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C80000 0x100>;
+		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C2>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_bus>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_3: i2c@12C90000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C90000 0x100>;
+		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_I2C3>;
+		clock-names = "i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_bus>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	hsi2c_4: i2c@12CA0000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CA0000 0x1000>;
+		interrupts = <0 60 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_hs_bus>;
+		clocks = <&clock CLK_USI0>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_5: i2c@12CB0000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CB0000 0x1000>;
+		interrupts = <0 61 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_hs_bus>;
+		clocks = <&clock CLK_USI1>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_6: i2c@12CC0000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CC0000 0x1000>;
+		interrupts = <0 62 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_hs_bus>;
+		clocks = <&clock CLK_USI2>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_7: i2c@12CD0000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12CD0000 0x1000>;
+		interrupts = <0 63 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_hs_bus>;
+		clocks = <&clock CLK_USI3>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_8: i2c@12E00000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E00000 0x1000>;
+		interrupts = <0 87 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c8_hs_bus>;
+		clocks = <&clock CLK_USI4>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_9: i2c@12E10000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E10000 0x1000>;
+		interrupts = <0 88 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c9_hs_bus>;
+		clocks = <&clock CLK_USI5>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hsi2c_10: i2c@12E20000 {
+		compatible = "samsung,exynos5-hsi2c";
+		reg = <0x12E20000 0x1000>;
+		interrupts = <0 203 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c10_hs_bus>;
+		clocks = <&clock CLK_USI6>;
+		clock-names = "hsi2c";
+		status = "disabled";
+	};
+
+	hdmi: hdmi@14530000 {
+		compatible = "samsung,exynos5420-hdmi";
+		reg = <0x14530000 0x70000>;
+		interrupts = <0 95 0>;
+		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+			 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+			 <&clock CLK_MOUT_HDMI>;
+		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+			"sclk_hdmiphy", "mout_hdmi";
+		phy = <&hdmiphy>;
+		samsung,syscon-phandle = <&pmu_system_controller>;
+		status = "disabled";
+		power-domains = <&disp_pd>;
+	};
+
+	hdmiphy: hdmiphy@145D0000 {
+		reg = <0x145D0000 0x20>;
+	};
+
+	mixer: mixer@14450000 {
+		compatible = "samsung,exynos5420-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+		clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
+		clock-names = "mixer", "sclk_hdmi";
+		power-domains = <&disp_pd>;
+	};
+
+	gsc_0: video-scaler@13e00000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e00000 0x1000>;
+		interrupts = <0 85 0>;
+		clocks = <&clock CLK_GSCL0>;
+		clock-names = "gscl";
+		power-domains = <&gsc_pd>;
+	};
+
+	gsc_1: video-scaler@13e10000 {
+		compatible = "samsung,exynos5-gsc";
+		reg = <0x13e10000 0x1000>;
+		interrupts = <0 86 0>;
+		clocks = <&clock CLK_GSCL1>;
+		clock-names = "gscl";
+		power-domains = <&gsc_pd>;
+	};
+
+	pmu_system_controller: system-controller@10040000 {
+		compatible = "samsung,exynos5420-pmu", "syscon";
+		reg = <0x10040000 0x5000>;
+		clock-names = "clkout16";
+		clocks = <&clock CLK_FIN_PLL>;
+		#clock-cells = <1>;
+	};
+
+	sysreg_system_controller: syscon@10050000 {
+		compatible = "samsung,exynos5-sysreg", "syscon";
+		reg = <0x10050000 0x5000>;
+	};
+
+	tmu_cpu0: tmu@10060000 {
+		compatible = "samsung,exynos5420-tmu";
+		reg = <0x10060000 0x100>;
+		interrupts = <0 65 0>;
+		clocks = <&clock CLK_TMU>;
+		clock-names = "tmu_apbif";
+	};
+
+	tmu_cpu1: tmu@10064000 {
+		compatible = "samsung,exynos5420-tmu";
+		reg = <0x10064000 0x100>;
+		interrupts = <0 183 0>;
+		clocks = <&clock CLK_TMU>;
+		clock-names = "tmu_apbif";
+	};
+
+	tmu_cpu2: tmu@10068000 {
+		compatible = "samsung,exynos5420-tmu-ext-triminfo";
+		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+		interrupts = <0 184 0>;
+		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
+		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+	};
+
+	tmu_cpu3: tmu@1006c000 {
+		compatible = "samsung,exynos5420-tmu-ext-triminfo";
+		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+		interrupts = <0 185 0>;
+		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
+		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+	};
+
+	tmu_gpu: tmu@100a0000 {
+		compatible = "samsung,exynos5420-tmu-ext-triminfo";
+		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+		interrupts = <0 215 0>;
+		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
+		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+	};
+
+        watchdog: watchdog@101D0000 {
+		compatible = "samsung,exynos5420-wdt";
+		reg = <0x101D0000 0x100>;
+		interrupts = <0 42 0>;
+		clocks = <&clock CLK_WDT>;
+		clock-names = "watchdog";
+		samsung,syscon-phandle = <&pmu_system_controller>;
+        };
+
+	sss: sss@10830000 {
+		compatible = "samsung,exynos4210-secss";
+		reg = <0x10830000 0x10000>;
+		interrupts = <0 112 0>;
+		clocks = <&clock CLK_SSS>;
+		clock-names = "secss";
+	};
+
+	usbdrd3_0: usb@12000000 {
+		compatible = "samsung,exynos5250-dwusb3";
+		clocks = <&clock CLK_USBD300>;
+		clock-names = "usbdrd30";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usbdrd_dwc3_0: dwc3 {
+			compatible = "snps,dwc3";
+			reg = <0x12000000 0x10000>;
+			interrupts = <0 72 0>;
+			phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+			phy-names = "usb2-phy", "usb3-phy";
+		};
+	};
+
+	usbdrd_phy0: phy@12100000 {
+		compatible = "samsung,exynos5420-usbdrd-phy";
+		reg = <0x12100000 0x100>;
+		clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+		clock-names = "phy", "ref";
+		samsung,pmu-syscon = <&pmu_system_controller>;
+		#phy-cells = <1>;
+	};
+
+	usbdrd3_1: usb@12400000 {
+		compatible = "samsung,exynos5250-dwusb3";
+		clocks = <&clock CLK_USBD301>;
+		clock-names = "usbdrd30";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usbdrd_dwc3_1: dwc3 {
+			compatible = "snps,dwc3";
+			reg = <0x12400000 0x10000>;
+			interrupts = <0 73 0>;
+			phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+			phy-names = "usb2-phy", "usb3-phy";
+		};
+	};
+
+	usbdrd_phy1: phy@12500000 {
+		compatible = "samsung,exynos5420-usbdrd-phy";
+		reg = <0x12500000 0x100>;
+		clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+		clock-names = "phy", "ref";
+		samsung,pmu-syscon = <&pmu_system_controller>;
+		#phy-cells = <1>;
+	};
+
+	usbhost2: usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock CLK_USBH20>;
+		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy 1>;
+		};
+	};
+
+	usbhost1: usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock CLK_USBH20>;
+		clock-names = "usbhost";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			phys = <&usb2_phy 1>;
+		};
+	};
+
+	usb2_phy: phy@12130000 {
+		compatible = "samsung,exynos5250-usb2-phy";
+		reg = <0x12130000 0x100>;
+		clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+		clock-names = "phy", "ref";
+		#phy-cells = <1>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		samsung,pmureg-phandle = <&pmu_system_controller>;
+	};
+};
diff --git a/src/arm/exynos5422-odroidxu3.dts b/src/arm/exynos5422-odroidxu3.dts
new file mode 100644
index 000000000000..a519c863248d
--- /dev/null
+++ b/src/arm/exynos5422-odroidxu3.dts
@@ -0,0 +1,371 @@
+/*
+ * Hardkernel Odroid XU3 board device tree source
+ *
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5800.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU3";
+	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x7EA00000>;
+	};
+
+	chosen {
+		linux,stdout-path = &serial_2;
+	};
+
+	fimd@14400000 {
+		status = "okay";
+	};
+
+	firmware@02073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	hsi2c_4: i2c@12CA0000 {
+		status = "okay";
+
+		s2mps11_pmic@66 {
+			compatible = "samsung,s2mps11-pmic";
+			reg = <0x66>;
+			s2mps11,buck2-ramp-delay = <12>;
+			s2mps11,buck34-ramp-delay = <12>;
+			s2mps11,buck16-ramp-delay = <12>;
+			s2mps11,buck6-ramp-enable = <1>;
+			s2mps11,buck2-ramp-enable = <1>;
+			s2mps11,buck3-ramp-enable = <1>;
+			s2mps11,buck4-ramp-enable = <1>;
+
+			s2mps11_osc: clocks {
+				#clock-cells = <1>;
+				clock-output-names = "s2mps11_ap",
+						"s2mps11_cp", "s2mps11_bt";
+			};
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "vdd_ldo1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "vdd_ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "vdd_ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "vdd_ldo6";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "vdd_ldo7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "vdd_ldo8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "vdd_ldo9";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "vdd_ldo10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "vdd_ldo11";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "vdd_ldo12";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "vdd_ldo13";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "vdd_ldo15";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "vdd_ldo16";
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "tsp_avdd";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "vdd_sd";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "tsp_io";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo26_reg: LDO26 {
+					regulator-name = "vdd_ldo26";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "vdd_mem";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "vdd_kfc";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "vdd_1.0v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "vdd_1.8v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "vdd_2.8v_ldo";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3750000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck10_reg: BUCK10 {
+					regulator-name = "vdd_vmem";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	i2c_2: i2c@12C80000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		status = "okay";
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos4210-hdmiddc";
+			reg = <0x50>;
+		};
+	};
+
+	rtc@101E0000 {
+		status = "okay";
+	};
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+	vdd-supply = <&ldo6_reg>;
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+	status = "okay";
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "otg";
+};
+
+&i2c_0 {
+	status = "okay";
+
+	/* A15 cluster: VDD_ARM */
+	ina231@40 {
+		compatible = "ti,ina231";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+	};
+
+	/* memory: VDD_MEM */
+	ina231@41 {
+		compatible = "ti,ina231";
+		reg = <0x41>;
+		shunt-resistor = <10000>;
+	};
+
+	/* GPU: VDD_G3D */
+	ina231@44 {
+		compatible = "ti,ina231";
+		reg = <0x44>;
+		shunt-resistor = <10000>;
+	};
+
+	/* A7 cluster: VDD_KFC */
+	ina231@45 {
+		compatible = "ti,ina231";
+		reg = <0x45>;
+		shunt-resistor = <10000>;
+	};
+};
diff --git a/src/arm/exynos5440-sd5v1.dts b/src/arm/exynos5440-sd5v1.dts
new file mode 100644
index 000000000000..268609a42b2c
--- /dev/null
+++ b/src/arm/exynos5440-sd5v1.dts
@@ -0,0 +1,39 @@
+/*
+ * SAMSUNG SD5v1 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5440.dtsi"
+
+/ {
+	model = "SAMSUNG SD5v1 board based on EXYNOS5440";
+	compatible = "samsung,sd5v1", "samsung,exynos5440", "samsung,exynos5";
+
+	chosen {
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+	};
+
+	fixed-rate-clocks {
+		xtal {
+			compatible = "samsung,clock-xtal";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	gmac: ethernet@00230000 {
+		fixed_phy;
+		phy_addr = <1>;
+	};
+
+	spi {
+		status = "disabled";
+	};
+
+};
diff --git a/src/arm/exynos5440-ssdk5440.dts b/src/arm/exynos5440-ssdk5440.dts
new file mode 100644
index 000000000000..ff55dac6e219
--- /dev/null
+++ b/src/arm/exynos5440-ssdk5440.dts
@@ -0,0 +1,78 @@
+/*
+ * SAMSUNG SSDK5440 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5440.dtsi"
+
+/ {
+	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
+	compatible = "samsung,ssdk5440", "samsung,exynos5440", "samsung,exynos5";
+
+	chosen {
+		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
+	};
+
+	spi_0: spi@D0000 {
+
+		flash: w25q128@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "winbond,w25q128";
+			spi-max-frequency = <15625000>;
+			reg = <0>;
+			controller-data {
+				samsung,spi-feedback-delay = <0>;
+			};
+
+			partition@00000 {
+				label = "BootLoader";
+				reg = <0x60000 0x80000>;
+				read-only;
+			};
+
+			partition@e0000 {
+				label = "Recovery-Kernel";
+				reg = <0xe0000 0x300000>;
+				read-only;
+			};
+
+			partition@3e0000 {
+				label = "CRAM-FS";
+				reg = <0x3e0000 0x700000>;
+				read-only;
+			};
+
+			partition@ae0000 {
+				label = "User-Data";
+				reg = <0xae0000 0x520000>;
+			};
+
+		};
+
+	};
+
+	fixed-rate-clocks {
+		xtal {
+			compatible = "samsung,clock-xtal";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	pcie@290000 {
+		reset-gpio = <&pin_ctrl 5 0>;
+		status = "okay";
+	};
+
+	pcie@2a0000 {
+		reset-gpio = <&pin_ctrl 22 0>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/exynos5440.dtsi b/src/arm/exynos5440.dtsi
new file mode 100644
index 000000000000..8f3373cd7b87
--- /dev/null
+++ b/src/arm/exynos5440.dtsi
@@ -0,0 +1,305 @@
+/*
+ * SAMSUNG EXYNOS5440 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/clock/exynos5440.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "samsung,exynos5440", "samsung,exynos5";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		spi0 = &spi_0;
+		tmuctrl0 = &tmuctrl_0;
+		tmuctrl1 = &tmuctrl_1;
+		tmuctrl2 = &tmuctrl_2;
+	};
+
+	clock: clock-controller@160000 {
+		compatible = "samsung,exynos5440-clock";
+		reg = <0x160000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@2E0000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg =	<0x2E1000 0x1000>,
+			<0x2E2000 0x1000>,
+			<0x2E4000 0x2000>,
+			<0x2E6000 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
+		interrupts = <0 52 4>,
+			     <0 53 4>,
+			     <0 54 4>,
+			     <0 55 4>;
+	};
+
+	timer {
+		compatible = "arm,cortex-a15-timer",
+			     "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <50000000>;
+	};
+
+	cpufreq@160000 {
+		compatible = "samsung,exynos5440-cpufreq";
+		reg = <0x160000 0x1000>;
+		interrupts = <0 57 0>;
+		operating-points = <
+				/* KHz	  uV */
+				1500000 1100000
+				1400000 1075000
+				1300000 1050000
+				1200000 1025000
+				1100000 1000000
+				1000000 975000
+				900000  950000
+				800000  925000
+		>;
+	};
+
+	serial_0: serial@B0000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0xB0000 0x1000>;
+		interrupts = <0 2 0>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	serial_1: serial@C0000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0xC0000 0x1000>;
+		interrupts = <0 3 0>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+
+	spi_0: spi@D0000 {
+		compatible = "samsung,exynos5440-spi";
+		reg = <0xD0000 0x100>;
+		interrupts = <0 4 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,spi-src-clk = <0>;
+		num-cs = <1>;
+		clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
+		clock-names = "spi", "spi_busclk0";
+	};
+
+	pin_ctrl: pinctrl {
+		compatible = "samsung,exynos5440-pinctrl";
+		reg = <0xE0000 0x1000>;
+		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
+			     <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#gpio-cells = <2>;
+
+		fan: fan {
+			samsung,exynos5440-pin-function = <1>;
+		};
+
+		hdd_led0: hdd_led0 {
+			samsung,exynos5440-pin-function = <2>;
+		};
+
+		hdd_led1: hdd_led1 {
+			samsung,exynos5440-pin-function = <3>;
+		};
+
+		uart1: uart1 {
+			samsung,exynos5440-pin-function = <4>;
+		};
+	};
+
+	i2c@F0000 {
+		compatible = "samsung,exynos5440-i2c";
+		reg = <0xF0000 0x1000>;
+		interrupts = <0 5 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_B_125>;
+		clock-names = "i2c";
+	};
+
+	i2c@100000 {
+		compatible = "samsung,exynos5440-i2c";
+		reg = <0x100000 0x1000>;
+		interrupts = <0 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clock CLK_B_125>;
+		clock-names = "i2c";
+	};
+
+	watchdog@110000 {
+		compatible = "samsung,s3c2410-wdt";
+		reg = <0x110000 0x1000>;
+		interrupts = <0 1 0>;
+		clocks = <&clock CLK_B_125>;
+		clock-names = "watchdog";
+	};
+
+	gmac: ethernet@00230000 {
+		compatible = "snps,dwmac-3.70a";
+		reg = <0x00230000 0x8000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 31 4>;
+		interrupt-names = "macirq";
+		phy-mode = "sgmii";
+		clocks = <&clock CLK_GMAC0>;
+		clock-names = "stmmaceth";
+	};
+
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+	};
+
+	rtc {
+		compatible = "samsung,s3c6410-rtc";
+		reg = <0x130000 0x1000>;
+		interrupts = <0 17 0>, <0 16 0>;
+		clocks = <&clock CLK_B_125>;
+		clock-names = "rtc";
+	};
+
+	tmuctrl_0: tmuctrl@160118 {
+		compatible = "samsung,exynos5440-tmu";
+		reg = <0x160118 0x230>, <0x160368 0x10>;
+		interrupts = <0 58 0>;
+		clocks = <&clock CLK_B_125>;
+		clock-names = "tmu_apbif";
+	};
+
+	tmuctrl_1: tmuctrl@16011C {
+		compatible = "samsung,exynos5440-tmu";
+		reg = <0x16011C 0x230>, <0x160368 0x10>;
+		interrupts = <0 58 0>;
+		clocks = <&clock CLK_B_125>;
+		clock-names = "tmu_apbif";
+	};
+
+	tmuctrl_2: tmuctrl@160120 {
+		compatible = "samsung,exynos5440-tmu";
+		reg = <0x160120 0x230>, <0x160368 0x10>;
+		interrupts = <0 58 0>;
+		clocks = <&clock CLK_B_125>;
+		clock-names = "tmu_apbif";
+	};
+
+	sata@210000 {
+		compatible = "snps,exynos5440-ahci";
+		reg = <0x210000 0x10000>;
+		interrupts = <0 30 0>;
+		clocks = <&clock CLK_SATA>;
+		clock-names = "sata";
+	};
+
+	ohci@220000 {
+		compatible = "samsung,exynos5440-ohci";
+		reg = <0x220000 0x1000>;
+		interrupts = <0 29 0>;
+		clocks = <&clock CLK_USB>;
+		clock-names = "usbhost";
+	};
+
+	ehci@221000 {
+		compatible = "samsung,exynos5440-ehci";
+		reg = <0x221000 0x1000>;
+		interrupts = <0 29 0>;
+		clocks = <&clock CLK_USB>;
+		clock-names = "usbhost";
+	};
+
+	pcie@290000 {
+		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+		reg = <0x290000 0x1000
+			0x270000 0x1000
+			0x271000 0x40>;
+		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0x0 0 &gic 53>;
+		num-lanes = <4>;
+		status = "disabled";
+	};
+
+	pcie@2a0000 {
+		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
+		reg = <0x2a0000 0x1000
+			0x272000 0x1000
+			0x271040 0x40>;
+		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
+		clock-names = "pcie", "pcie_bus";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
+			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0x0 0 &gic 56>;
+		num-lanes = <4>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/exynos5800-peach-pi.dts b/src/arm/exynos5800-peach-pi.dts
new file mode 100644
index 000000000000..06737c60d333
--- /dev/null
+++ b/src/arm/exynos5800-peach-pi.dts
@@ -0,0 +1,957 @@
+/*
+ * Google Peach Pi Rev 10+ board device tree source
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
+#include "exynos5800.dtsi"
+
+/ {
+	model = "Google Peach Pi Rev 10+";
+
+	compatible = "google,pi-rev16",
+		"google,pi-rev15", "google,pi-rev14",
+		"google,pi-rev13", "google,pi-rev12",
+		"google,pi-rev11", "google,pi-rev10",
+		"google,pi", "google,peach", "samsung,exynos5800",
+		"samsung,exynos5";
+
+	aliases {
+		/* Assign 20 so we don't get confused w/ builtin ones */
+		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+		power-supply = <&tps65090_fet1>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq &lid_irq>;
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+
+	};
+
+	memory {
+		reg = <0x20000000 0x80000000>;
+	};
+
+	sound {
+		compatible = "google,snow-audio-max98091";
+
+		samsung,model = "Peach-Pi-I2S-MAX98091";
+		samsung,i2s-controller = <&i2s0>;
+		samsung,audio-codec = <&max98091>;
+	};
+
+	usb300_vbus_reg: regulator-usb300 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb300_vbus_en>;
+		enable-active-high;
+	};
+
+	usb301_vbus_reg: regulator-usb301 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph0 1 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb301_vbus_en>;
+		enable-active-high;
+	};
+
+	vbat: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	panel: panel {
+		compatible = "auo,b133htn01";
+		power-supply = <&tps65090_fet6>;
+		backlight = <&backlight>;
+	};
+};
+
+&adc {
+	status = "okay";
+	vdd-supply = <&ldo9_reg>;
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd_gpio>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	samsung,hpd-gpio = <&gpx2 6 0>;
+	panel = <&panel>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&hsi2c_4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	max77802: max77802-pmic@9 {
+		compatible = "maxim,max77802";
+		interrupt-parent = <&gpx3>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
+			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+		wakeup-source;
+		reg = <0x9>;
+		#clock-cells = <1>;
+
+		inb1-supply = <&tps65090_dcdc2>;
+		inb2-supply = <&tps65090_dcdc1>;
+		inb3-supply = <&tps65090_dcdc2>;
+		inb4-supply = <&tps65090_dcdc2>;
+		inb5-supply = <&tps65090_dcdc1>;
+		inb6-supply = <&tps65090_dcdc2>;
+		inb7-supply = <&tps65090_dcdc1>;
+		inb8-supply = <&tps65090_dcdc1>;
+		inb9-supply = <&tps65090_dcdc1>;
+		inb10-supply = <&tps65090_dcdc1>;
+
+		inl1-supply = <&buck5_reg>;
+		inl2-supply = <&buck7_reg>;
+		inl3-supply = <&buck9_reg>;
+		inl4-supply = <&buck9_reg>;
+		inl5-supply = <&buck9_reg>;
+		inl6-supply = <&tps65090_dcdc2>;
+		inl7-supply = <&buck9_reg>;
+		inl9-supply = <&tps65090_dcdc2>;
+		inl10-supply = <&buck7_reg>;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_1v2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_1v35";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_emmc";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_2v";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_1v0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vdd_1v2_2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_1v8_3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			vqmmc_sdcard: ldo4_reg: LDO4 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_1v8_5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_1v8_6";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_1v8_7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-mode = <MAX77802_OPMODE_LP>;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd_ldo15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vdd_g3ds";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "ldo_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "ldo_19";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "ldo_20";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "ldo_21";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "ldo_23";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+			ldo24_reg: LDO24 {
+				regulator-name = "ldo_24";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "ldo_25";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "ldo_26";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "ldo_27";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "ldo_28";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "ldo_29";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "vdd_mifs";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "ldo_32";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "ldo_33";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "ldo_34";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "ldo_35";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+	};
+};
+
+&hsi2c_7 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	max98091: codec@10 {
+		compatible = "maxim,max98091";
+		reg = <0x10>;
+		interrupts = <2 0>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98091_irq>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29018";
+		reg = <0x44>;
+		vcc-supply = <&tps65090_fet5>;
+	};
+};
+
+&hsi2c_8 {
+	status = "okay";
+	clock-frequency = <333000>;
+	/* Atmel mXT540S */
+	trackpad@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpx1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_irq>;
+		linux,gpio-keymap = <KEY_RESERVED
+				     KEY_RESERVED
+				     KEY_RESERVED	/* GPIO 0 */
+				     KEY_RESERVED	/* GPIO 1 */
+				     BTN_LEFT		/* GPIO 2 */
+				     KEY_RESERVED>;	/* GPIO 3 */
+	};
+};
+
+&hsi2c_9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+
+		/* Unused irq; but still need to configure the pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpm_irq>;
+	};
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	samsung,i2c-slave-addr = <0x50>;
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	mmc-hs200-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+};
+
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mask_tpm_reset>;
+
+	max98091_irq: max98091-irq {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	/* We need GPX0_6 to be low at sleep time; just keep it low always */
+	mask_tpm_reset: mask-tpm-reset {
+		samsung,pins = "gpx0-6";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+		samsung,pin-val = <0>;
+	};
+
+	tpm_irq: tpm-irq {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	trackpad_irq: trackpad-irq {
+		samsung,pins = "gpx1-1";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	power_key_irq: power-key-irq {
+		samsung,pins = "gpx1-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ec_irq: ec-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	tps65090_irq: tps65090-irq {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	dp_hpd_gpio: dp_hpd_gpio {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	max77802_irq: max77802-irq {
+		samsung,pins = "gpx3-1";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lid_irq: lid-irq {
+		samsung,pins = "gpx3-4";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	pmic_dvs_1: pmic-dvs-1 {
+		samsung,pins = "gpy7-6";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_2 {
+	pmic_dvs_2: pmic-dvs-2 {
+		samsung,pins = "gpj4-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pmic_dvs_3: pmic-dvs-3 {
+		samsung,pins = "gpj4-3";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_3 {
+	/* Drive SPI lines at x2 for better integrity */
+	spi2-bus {
+		samsung,pin-drv = <2>;
+	};
+
+	/* Drive SPI chip select at x2 for better integrity */
+	ec_spi_cs: ec-spi-cs {
+		samsung,pins = "gpb1-2";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gph0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pmic_selb: pmic-selb {
+		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
+			       "gph0-6";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&spi_2 {
+	status = "okay";
+	num-cs = <1>;
+	samsung,spi-src-clk = <0>;
+	cs-gpios = <&gpb1 2 0>;
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		interrupt-parent = <&gpx1>;
+		interrupts = <5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_spi_cs &ec_irq>;
+		reg = <0>;
+		spi-max-frequency = <3125000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <1>;
+		};
+
+		i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			google,remote-bus = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+				sbs,i2c-retry-count = <2>;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&tps65090_dcdc1>;
+				infet3-supply = <&tps65090_dcdc2>;
+				infet4-supply = <&tps65090_dcdc2>;
+				infet5-supply = <&tps65090_dcdc2>;
+				infet6-supply = <&tps65090_dcdc2>;
+				infet7-supply = <&tps65090_dcdc1>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					tps65090_dcdc1: dcdc1 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc2: dcdc2 {
+						ti,enable-ext-control;
+					};
+					tps65090_dcdc3: dcdc3 {
+						ti,enable-ext-control;
+					};
+					tps65090_fet1: fet1 {
+						regulator-name = "vcd_led";
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+					};
+					tps65090_fet3: fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+					};
+					tps65090_fet4: fet4 {
+						regulator-name = "sdcard";
+						regulator-always-on;
+					};
+					tps65090_fet5: fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+					};
+					tps65090_fet6: fet6 {
+						regulator-name = "lcd_vdd";
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+					};
+					tps65090_ldo1: ldo1 {
+					};
+					tps65090_ldo2: ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+};
+
+&uart_3 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&usbdrd_phy0 {
+	vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+	vbus-supply = <&usb301_vbus_reg>;
+};
+
+/*
+ * Use longest HW watchdog in SoC (32 seconds) since the hardware
+ * watchdog provides no debugging information (compared to soft/hard
+ * lockup detectors) and so should be last resort.
+ */
+&watchdog {
+	timeout-sec = <32>;
+};
+
+#include "cros-ec-keyboard.dtsi"
+#include "cros-adc-thermistors.dtsi"
diff --git a/src/arm/exynos5800.dtsi b/src/arm/exynos5800.dtsi
new file mode 100644
index 000000000000..c0bb3563cac1
--- /dev/null
+++ b/src/arm/exynos5800.dtsi
@@ -0,0 +1,28 @@
+/*
+ * SAMSUNG EXYNOS5800 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file.
+ * EXYNOS5800 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos5420.dtsi"
+
+/ {
+	compatible = "samsung,exynos5800", "samsung,exynos5";
+};
+
+&clock {
+	compatible = "samsung,exynos5800-clock";
+};
+
+&mfc {
+	compatible = "samsung,mfc-v8";
+};
diff --git a/src/arm/hi3620-hi4511.dts b/src/arm/hi3620-hi4511.dts
new file mode 100644
index 000000000000..fe623928f687
--- /dev/null
+++ b/src/arm/hi3620-hi4511.dts
@@ -0,0 +1,649 @@
+/*
+ *  Copyright (C) 2012-2013 Linaro Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "hi3620.dtsi"
+
+/ {
+	model = "Hisilicon Hi4511 Development Board";
+	compatible = "hisilicon,hi3620-hi4511";
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	amba {
+		dual_timer0: dual_timer@800000 {
+			status = "ok";
+		};
+
+		uart0: uart@b00000 {	/* console */
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
+			status = "ok";
+		};
+
+		uart1: uart@b01000 { /* modem */
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
+			status = "ok";
+		};
+
+		uart2: uart@b02000 { /* audience */
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
+			status = "ok";
+		};
+
+		uart3: uart@b03000 {
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
+			status = "ok";
+		};
+
+		uart4: uart@b04000 {
+			pinctrl-names = "default", "idle";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
+			status = "ok";
+		};
+
+		pmx0: pinmux@803000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&board_pmx_pins>;
+
+			board_pmx_pins: board_pmx_pins {
+				pinctrl-single,pins = <
+					0x008 0x0	/* GPIO -- eFUSE_DOUT */
+					0x100 0x0	/* USIM_CLK & USIM_DATA (IOMG63) */
+				>;
+			};
+			uart0_pmx_func: uart0_pmx_func {
+				pinctrl-single,pins = <
+					0x0f0 0x0
+					0x0f4 0x0	/* UART0_RX & UART0_TX */
+				>;
+			};
+			uart0_pmx_idle: uart0_pmx_idle {
+				pinctrl-single,pins = <
+					/*0x0f0 0x1*/	/* UART0_CTS & UART0_RTS */
+					0x0f4 0x1	/* UART0_RX & UART0_TX */
+				>;
+			};
+			uart1_pmx_func: uart1_pmx_func {
+				pinctrl-single,pins = <
+					0x0f8 0x0	/* UART1_CTS & UART1_RTS (IOMG61) */
+					0x0fc 0x0	/* UART1_RX & UART1_TX (IOMG62) */
+				>;
+			};
+			uart1_pmx_idle: uart1_pmx_idle {
+				pinctrl-single,pins = <
+					0x0f8 0x1	/* GPIO (IOMG61) */
+					0x0fc 0x1	/* GPIO (IOMG62) */
+				>;
+			};
+			uart2_pmx_func: uart2_pmx_func {
+				pinctrl-single,pins = <
+					0x104 0x2	/* UART2_RXD (IOMG96) */
+					0x108 0x2	/* UART2_TXD (IOMG64) */
+				>;
+			};
+			uart2_pmx_idle: uart2_pmx_idle {
+				pinctrl-single,pins = <
+					0x104 0x1	/* GPIO (IOMG96) */
+					0x108 0x1	/* GPIO (IOMG64) */
+				>;
+			};
+			uart3_pmx_func: uart3_pmx_func {
+				pinctrl-single,pins = <
+					0x160 0x2	/* UART3_CTS & UART3_RTS (IOMG85) */
+					0x164 0x2	/* UART3_RXD & UART3_TXD (IOMG86) */
+				>;
+			};
+			uart3_pmx_idle: uart3_pmx_idle {
+				pinctrl-single,pins = <
+					0x160 0x1	/* GPIO (IOMG85) */
+					0x164 0x1	/* GPIO (IOMG86) */
+				>;
+			};
+			uart4_pmx_func: uart4_pmx_func {
+				pinctrl-single,pins = <
+					0x168 0x0	/* UART4_CTS & UART4_RTS (IOMG87) */
+					0x16c 0x0	/* UART4_RXD (IOMG88) */
+					0x170 0x0	/* UART4_TXD (IOMG93) */
+				>;
+			};
+			uart4_pmx_idle: uart4_pmx_idle {
+				pinctrl-single,pins = <
+					0x168 0x1	/* GPIO (IOMG87) */
+					0x16c 0x1	/* GPIO (IOMG88) */
+					0x170 0x1	/* GPIO (IOMG93) */
+				>;
+			};
+			i2c0_pmx_func: i2c0_pmx_func {
+				pinctrl-single,pins = <
+					0x0b4 0x0	/* I2C0_SCL & I2C0_SDA (IOMG45) */
+				>;
+			};
+			i2c0_pmx_idle: i2c0_pmx_idle {
+				pinctrl-single,pins = <
+					0x0b4 0x1	/* GPIO (IOMG45) */
+				>;
+			};
+			i2c1_pmx_func: i2c1_pmx_func {
+				pinctrl-single,pins = <
+					0x0b8 0x0	/* I2C1_SCL & I2C1_SDA (IOMG46) */
+				>;
+			};
+			i2c1_pmx_idle: i2c1_pmx_idle {
+				pinctrl-single,pins = <
+					0x0b8 0x1	/* GPIO (IOMG46) */
+				>;
+			};
+			i2c2_pmx_func: i2c2_pmx_func {
+				pinctrl-single,pins = <
+					0x068 0x0	/* I2C2_SCL (IOMG26) */
+					0x06c 0x0	/* I2C2_SDA (IOMG27) */
+				>;
+			};
+			i2c2_pmx_idle: i2c2_pmx_idle {
+				pinctrl-single,pins = <
+					0x068 0x1	/* GPIO (IOMG26) */
+					0x06c 0x1	/* GPIO (IOMG27) */
+				>;
+			};
+			i2c3_pmx_func: i2c3_pmx_func {
+				pinctrl-single,pins = <
+					0x050 0x2	/* I2C3_SCL (IOMG20) */
+					0x054 0x2	/* I2C3_SDA (IOMG21) */
+				>;
+			};
+			i2c3_pmx_idle: i2c3_pmx_idle {
+				pinctrl-single,pins = <
+					0x050 0x1	/* GPIO (IOMG20) */
+					0x054 0x1	/* GPIO (IOMG21) */
+				>;
+			};
+			spi0_pmx_func: spi0_pmx_func {
+				pinctrl-single,pins = <
+					0x0d4 0x0	/* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
+					0x0d8 0x0	/* SPI0_CS0 (IOMG54) */
+					0x0dc 0x0	/* SPI0_CS1 (IOMG55) */
+					0x0e0 0x0	/* SPI0_CS2 (IOMG56) */
+					0x0e4 0x0	/* SPI0_CS3 (IOMG57) */
+				>;
+			};
+			spi0_pmx_idle: spi0_pmx_idle {
+				pinctrl-single,pins = <
+					0x0d4 0x1	/* GPIO (IOMG53) */
+					0x0d8 0x1	/* GPIO (IOMG54) */
+					0x0dc 0x1	/* GPIO (IOMG55) */
+					0x0e0 0x1	/* GPIO (IOMG56) */
+					0x0e4 0x1	/* GPIO (IOMG57) */
+				>;
+			};
+			spi1_pmx_func: spi1_pmx_func {
+				pinctrl-single,pins = <
+					0x184 0x0	/* SPI1_CLK/SPI1_DI (IOMG98) */
+					0x0e8 0x0	/* SPI1_DO (IOMG58) */
+					0x0ec 0x0	/* SPI1_CS (IOMG95) */
+				>;
+			};
+			spi1_pmx_idle: spi1_pmx_idle {
+				pinctrl-single,pins = <
+					0x184 0x1	/* GPIO (IOMG98) */
+					0x0e8 0x1	/* GPIO (IOMG58) */
+					0x0ec 0x1	/* GPIO (IOMG95) */
+				>;
+			};
+			kpc_pmx_func: kpc_pmx_func {
+				pinctrl-single,pins = <
+					0x12c 0x0	/* KEY_IN0 (IOMG73) */
+					0x130 0x0	/* KEY_IN1 (IOMG74) */
+					0x134 0x0	/* KEY_IN2 (IOMG75) */
+					0x10c 0x0	/* KEY_OUT0 (IOMG65) */
+					0x110 0x0	/* KEY_OUT1 (IOMG66) */
+					0x114 0x0	/* KEY_OUT2 (IOMG67) */
+				>;
+			};
+			kpc_pmx_idle: kpc_pmx_idle {
+				pinctrl-single,pins = <
+					0x12c 0x1	/* GPIO (IOMG73) */
+					0x130 0x1	/* GPIO (IOMG74) */
+					0x134 0x1	/* GPIO (IOMG75) */
+					0x10c 0x1	/* GPIO (IOMG65) */
+					0x110 0x1	/* GPIO (IOMG66) */
+					0x114 0x1	/* GPIO (IOMG67) */
+				>;
+			};
+			gpio_key_func: gpio_key_func {
+				pinctrl-single,pins = <
+					0x10c 0x1	/* KEY_OUT0/GPIO (IOMG65) */
+					0x130 0x1	/* KEY_IN1/GPIO (IOMG74) */
+				>;
+			};
+			emmc_pmx_func: emmc_pmx_func {
+				pinctrl-single,pins = <
+					0x030 0x2	/* eMMC_CMD/eMMC_CLK (IOMG12) */
+					0x018 0x0	/* NAND_CS3_N (IOMG6) */
+					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
+					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
+					0x02c 0x2	/* eMMC_DATA[0:7] (IOMG10) */
+				>;
+			};
+			emmc_pmx_idle: emmc_pmx_idle {
+				pinctrl-single,pins = <
+					0x030 0x0	/* GPIO (IOMG12) */
+					0x018 0x1	/* GPIO (IOMG6) */
+					0x024 0x1	/* GPIO (IOMG8) */
+					0x028 0x1	/* GPIO (IOMG9) */
+					0x02c 0x1	/* GPIO (IOMG10) */
+				>;
+			};
+			sd_pmx_func: sd_pmx_func {
+				pinctrl-single,pins = <
+					0x0bc 0x0	/* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
+					0x0c0 0x0	/* SD_DATA3 (IOMG48) */
+				>;
+			};
+			sd_pmx_idle: sd_pmx_idle {
+				pinctrl-single,pins = <
+					0x0bc 0x1	/* GPIO (IOMG47) */
+					0x0c0 0x1	/* GPIO (IOMG48) */
+				>;
+			};
+			nand_pmx_func: nand_pmx_func {
+				pinctrl-single,pins = <
+					0x00c 0x0	/* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
+					0x010 0x0	/* NAND_CS1_N (IOMG4) */
+					0x014 0x0	/* NAND_CS2_N (IOMG5) */
+					0x018 0x0	/* NAND_CS3_N (IOMG6) */
+					0x01c 0x0	/* NAND_BUSY0_N (IOMG94) */
+					0x020 0x0	/* NAND_BUSY1_N (IOMG7) */
+					0x024 0x0	/* NAND_BUSY2_N (IOMG8) */
+					0x028 0x0	/* NAND_BUSY3_N (IOMG9) */
+					0x02c 0x0	/* NAND_DATA[8:15] (IOMG10) */
+				>;
+			};
+			nand_pmx_idle: nand_pmx_idle {
+				pinctrl-single,pins = <
+					0x00c 0x1	/* GPIO (IOMG3) */
+					0x010 0x1	/* GPIO (IOMG4) */
+					0x014 0x1	/* GPIO (IOMG5) */
+					0x018 0x1	/* GPIO (IOMG6) */
+					0x01c 0x1	/* GPIO (IOMG94) */
+					0x020 0x1	/* GPIO (IOMG7) */
+					0x024 0x1	/* GPIO (IOMG8) */
+					0x028 0x1	/* GPIO (IOMG9) */
+					0x02c 0x1	/* GPIO (IOMG10) */
+				>;
+			};
+			sdio_pmx_func: sdio_pmx_func {
+				pinctrl-single,pins = <
+					0x0c4 0x0	/* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
+				>;
+			};
+			sdio_pmx_idle: sdio_pmx_idle {
+				pinctrl-single,pins = <
+					0x0c4 0x1	/* GPIO (IOMG49) */
+				>;
+			};
+			audio_out_pmx_func: audio_out_pmx_func {
+				pinctrl-single,pins = <
+					0x0f0 0x1	/* GPIO (IOMG59), audio spk & earphone */
+				>;
+			};
+		};
+
+		pmx1: pinmux@803800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <	&board_pu_pins &board_pd_pins &board_pd_ps_pins
+					&board_np_pins &board_ps_pins &kpc_cfg_func
+					&audio_out_cfg_func>;
+			board_pu_pins: board_pu_pins {
+				pinctrl-single,pins = <
+					0x014 0		/* GPIO_158 (IOCFG2) */
+					0x018 0		/* GPIO_159 (IOCFG3) */
+					0x01c 0		/* BOOT_MODE0 (IOCFG4) */
+					0x020 0		/* BOOT_MODE1 (IOCFG5) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+			};
+			board_pd_pins: board_pd_pins {
+				pinctrl-single,pins = <
+					0x038 0		/* eFUSE_DOUT (IOCFG11) */
+					0x150 0		/* ISP_GPIO8 (IOCFG93) */
+					0x154 0		/* ISP_GPIO9 (IOCFG94) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			board_pd_ps_pins: board_pd_ps_pins {
+				pinctrl-single,pins = <
+					0x2d8 0		/* CLK_OUT0 (IOCFG190) */
+					0x004 0		/* PMU_SPI_DATA (IOCFG192) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			board_np_pins: board_np_pins {
+				pinctrl-single,pins = <
+					0x24c 0		/* KEYPAD_OUT7 (IOCFG155) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			board_ps_pins: board_ps_pins {
+				pinctrl-single,pins = <
+					0x000 0		/* PMU_SPI_CLK (IOCFG191) */
+					0x008 0		/* PMU_SPI_CS_N (IOCFG193) */
+				>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			uart0_cfg_func: uart0_cfg_func {
+				pinctrl-single,pins = <
+					0x208 0		/* UART0_RXD (IOCFG138) */
+					0x20c 0		/* UART0_TXD (IOCFG139) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart0_cfg_idle: uart0_cfg_idle {
+				pinctrl-single,pins = <
+					0x208 0		/* UART0_RXD (IOCFG138) */
+					0x20c 0		/* UART0_TXD (IOCFG139) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart1_cfg_func: uart1_cfg_func {
+				pinctrl-single,pins = <
+					0x210 0		/* UART1_CTS (IOCFG140) */
+					0x214 0		/* UART1_RTS (IOCFG141) */
+					0x218 0		/* UART1_RXD (IOCFG142) */
+					0x21c 0		/* UART1_TXD (IOCFG143) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart1_cfg_idle: uart1_cfg_idle {
+				pinctrl-single,pins = <
+					0x210 0		/* UART1_CTS (IOCFG140) */
+					0x214 0		/* UART1_RTS (IOCFG141) */
+					0x218 0		/* UART1_RXD (IOCFG142) */
+					0x21c 0		/* UART1_TXD (IOCFG143) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart2_cfg_func: uart2_cfg_func {
+				pinctrl-single,pins = <
+					0x220 0		/* UART2_CTS (IOCFG144) */
+					0x224 0		/* UART2_RTS (IOCFG145) */
+					0x228 0		/* UART2_RXD (IOCFG146) */
+					0x22c 0		/* UART2_TXD (IOCFG147) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart2_cfg_idle: uart2_cfg_idle {
+				pinctrl-single,pins = <
+					0x220 0		/* GPIO (IOCFG144) */
+					0x224 0		/* GPIO (IOCFG145) */
+					0x228 0		/* GPIO (IOCFG146) */
+					0x22c 0		/* GPIO (IOCFG147) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart3_cfg_func: uart3_cfg_func {
+				pinctrl-single,pins = <
+					0x294 0		/* UART3_CTS (IOCFG173) */
+					0x298 0		/* UART3_RTS (IOCFG174) */
+					0x29c 0		/* UART3_RXD (IOCFG175) */
+					0x2a0 0		/* UART3_TXD (IOCFG176) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart3_cfg_idle: uart3_cfg_idle {
+				pinctrl-single,pins = <
+					0x294 0		/* UART3_CTS (IOCFG173) */
+					0x298 0		/* UART3_RTS (IOCFG174) */
+					0x29c 0		/* UART3_RXD (IOCFG175) */
+					0x2a0 0		/* UART3_TXD (IOCFG176) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			uart4_cfg_func: uart4_cfg_func {
+				pinctrl-single,pins = <
+					0x2a4 0		/* UART4_CTS (IOCFG177) */
+					0x2a8 0		/* UART4_RTS (IOCFG178) */
+					0x2ac 0		/* UART4_RXD (IOCFG179) */
+					0x2b0 0		/* UART4_TXD (IOCFG180) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			i2c0_cfg_func: i2c0_cfg_func {
+				pinctrl-single,pins = <
+					0x17c 0		/* I2C0_SCL (IOCFG103) */
+					0x180 0		/* I2C0_SDA (IOCFG104) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c1_cfg_func: i2c1_cfg_func {
+				pinctrl-single,pins = <
+					0x184 0		/* I2C1_SCL (IOCFG105) */
+					0x188 0		/* I2C1_SDA (IOCFG106) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c2_cfg_func: i2c2_cfg_func {
+				pinctrl-single,pins = <
+					0x118 0		/* I2C2_SCL (IOCFG79) */
+					0x11c 0		/* I2C2_SDA (IOCFG80) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			i2c3_cfg_func: i2c3_cfg_func {
+				pinctrl-single,pins = <
+					0x100 0		/* I2C3_SCL (IOCFG73) */
+					0x104 0		/* I2C3_SDA (IOCFG74) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi0_cfg_func1: spi0_cfg_func1 {
+				pinctrl-single,pins = <
+					0x1d4 0		/* SPI0_CLK (IOCFG125) */
+					0x1d8 0		/* SPI0_DI (IOCFG126) */
+					0x1dc 0		/* SPI0_DO (IOCFG127) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi0_cfg_func2: spi0_cfg_func2 {
+				pinctrl-single,pins = <
+					0x1e0 0		/* SPI0_CS0 (IOCFG128) */
+					0x1e4 0		/* SPI0_CS1 (IOCFG129) */
+					0x1e8 0		/* SPI0_CS2 (IOCFG130 */
+					0x1ec 0		/* SPI0_CS3 (IOCFG131) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi1_cfg_func1: spi1_cfg_func1 {
+				pinctrl-single,pins = <
+					0x1f0 0		/* SPI1_CLK (IOCFG132) */
+					0x1f4 0		/* SPI1_DI (IOCFG133) */
+					0x1f8 0		/* SPI1_DO (IOCFG134) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			spi1_cfg_func2: spi1_cfg_func2 {
+				pinctrl-single,pins = <
+					0x1fc 0		/* SPI1_CS (IOCFG135) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			kpc_cfg_func: kpc_cfg_func {
+				pinctrl-single,pins = <
+					0x250 0		/* KEY_IN0 (IOCFG156) */
+					0x254 0		/* KEY_IN1 (IOCFG157) */
+					0x258 0		/* KEY_IN2 (IOCFG158) */
+					0x230 0		/* KEY_OUT0 (IOCFG148) */
+					0x234 0		/* KEY_OUT1 (IOCFG149) */
+					0x238 0		/* KEY_OUT2 (IOCFG150) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+			emmc_cfg_func: emmc_cfg_func {
+				pinctrl-single,pins = <
+					0x0ac 0		/* eMMC_CMD (IOCFG40) */
+					0x0b0 0		/* eMMC_CLK (IOCFG41) */
+					0x058 0		/* NAND_CS3_N (IOCFG19) */
+					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
+					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
+					0x08c 0		/* NAND_DATA8 (IOCFG32) */
+					0x090 0		/* NAND_DATA9 (IOCFG33) */
+					0x094 0		/* NAND_DATA10 (IOCFG34) */
+					0x098 0		/* NAND_DATA11 (IOCFG35) */
+					0x09c 0		/* NAND_DATA12 (IOCFG36) */
+					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
+					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
+					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sd_cfg_func1: sd_cfg_func1 {
+				pinctrl-single,pins = <
+					0x18c 0		/* SD_CLK (IOCFG107) */
+					0x190 0		/* SD_CMD (IOCFG108) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sd_cfg_func2: sd_cfg_func2 {
+				pinctrl-single,pins = <
+					0x194 0		/* SD_DATA0 (IOCFG109) */
+					0x198 0		/* SD_DATA1 (IOCFG110) */
+					0x19c 0		/* SD_DATA2 (IOCFG111) */
+					0x1a0 0		/* SD_DATA3 (IOCFG112) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x70 0xf0>;
+			};
+			nand_cfg_func1: nand_cfg_func1 {
+				pinctrl-single,pins = <
+					0x03c 0		/* NAND_ALE (IOCFG12) */
+					0x040 0		/* NAND_CLE (IOCFG13) */
+					0x06c 0		/* NAND_DATA0 (IOCFG24) */
+					0x070 0		/* NAND_DATA1 (IOCFG25) */
+					0x074 0		/* NAND_DATA2 (IOCFG26) */
+					0x078 0		/* NAND_DATA3 (IOCFG27) */
+					0x07c 0		/* NAND_DATA4 (IOCFG28) */
+					0x080 0		/* NAND_DATA5 (IOCFG29) */
+					0x084 0		/* NAND_DATA6 (IOCFG30) */
+					0x088 0		/* NAND_DATA7 (IOCFG31) */
+					0x08c 0		/* NAND_DATA8 (IOCFG32) */
+					0x090 0		/* NAND_DATA9 (IOCFG33) */
+					0x094 0		/* NAND_DATA10 (IOCFG34) */
+					0x098 0		/* NAND_DATA11 (IOCFG35) */
+					0x09c 0		/* NAND_DATA12 (IOCFG36) */
+					0x0a0 0		/* NAND_DATA13 (IOCFG37) */
+					0x0a4 0		/* NAND_DATA14 (IOCFG38) */
+					0x0a8 0		/* NAND_DATA15 (IOCFG39) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			nand_cfg_func2: nand_cfg_func2 {
+				pinctrl-single,pins = <
+					0x044 0		/* NAND_RE_N (IOCFG14) */
+					0x048 0		/* NAND_WE_N (IOCFG15) */
+					0x04c 0		/* NAND_CS0_N (IOCFG16) */
+					0x050 0		/* NAND_CS1_N (IOCFG17) */
+					0x054 0		/* NAND_CS2_N (IOCFG18) */
+					0x058 0		/* NAND_CS3_N (IOCFG19) */
+					0x05c 0		/* NAND_BUSY0_N (IOCFG20) */
+					0x060 0		/* NAND_BUSY1_N (IOCFG21) */
+					0x064 0		/* NAND_BUSY2_N (IOCFG22) */
+					0x068 0		/* NAND_BUSY3_N (IOCFG23) */
+				>;
+				pinctrl-single,bias-pulldown = <0 2 0 2>;
+				pinctrl-single,bias-pullup = <1 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			sdio_cfg_func: sdio_cfg_func {
+				pinctrl-single,pins = <
+					0x1a4 0		/* SDIO0_CLK (IOCG113) */
+					0x1a8 0		/* SDIO0_CMD (IOCG114) */
+					0x1ac 0		/* SDIO0_DATA0 (IOCG115) */
+					0x1b0 0		/* SDIO0_DATA1 (IOCG116) */
+					0x1b4 0		/* SDIO0_DATA2 (IOCG117) */
+					0x1b8 0		/* SDIO0_DATA3 (IOCG118) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+				pinctrl-single,drive-strength = <0x30 0xf0>;
+			};
+			audio_out_cfg_func: audio_out_cfg_func {
+				pinctrl-single,pins = <
+					0x200 0		/* GPIO (IOCFG136) */
+					0x204 0		/* GPIO (IOCFG137) */
+				>;
+				pinctrl-single,bias-pulldown = <2 2 0 2>;
+				pinctrl-single,bias-pullup = <0 1 0 1>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		call {
+			label = "call";
+			gpios = <&gpio17 2 0>;
+			linux,code = <169>;	/* KEY_PHONE */
+		};
+	};
+};
diff --git a/src/arm/hi3620.dtsi b/src/arm/hi3620.dtsi
new file mode 100644
index 000000000000..6cbb62e5c6a9
--- /dev/null
+++ b/src/arm/hi3620.dtsi
@@ -0,0 +1,566 @@
+/*
+ * Hisilicon Ltd. Hi3620 SoC
+ *
+ * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/hi3620-clock.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	pclk: clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "hisilicon,hi3620-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	amba {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0xfc000000 0x2000000>;
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0x100000 0x100000>;
+			interrupts = <0 15 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			/* gic dist base, gic cpu base */
+			reg = <0x1000 0x1000>, <0x100 0x100>;
+		};
+
+		sysctrl: system-controller@802000 {
+			compatible = "hisilicon,sysctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x802000 0x1000>;
+			reg = <0x802000 0x1000>;
+
+			smp-offset = <0x31c>;
+			resume-offset = <0x308>;
+			reboot-offset = <0x4>;
+
+			clock: clock@0 {
+				compatible = "hisilicon,hi3620-clock";
+				reg = <0 0x10000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		dual_timer0: dual_timer@800000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x800000 0x1000>;
+			/* timer00 & timer01 */
+			interrupts = <0 0 4>, <0 1 4>;
+			clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer1: dual_timer@801000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x801000 0x1000>;
+			/* timer10 & timer11 */
+			interrupts = <0 2 4>, <0 3 4>;
+			clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer2: dual_timer@a01000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xa01000 0x1000>;
+			/* timer20 & timer21 */
+			interrupts = <0 4 4>, <0 5 4>;
+			clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer3: dual_timer@a02000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xa02000 0x1000>;
+			/* timer30 & timer31 */
+			interrupts = <0 6 4>, <0 7 4>;
+			clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dual_timer4: dual_timer@a03000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0xa03000 0x1000>;
+			/* timer40 & timer41 */
+			interrupts = <0 96 4>, <0 97 4>;
+			clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		timer5: timer@600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x600 0x20>;
+			interrupts = <1 13 0xf01>;
+		};
+
+		uart0: uart@b00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb00000 0x1000>;
+			interrupts = <0 20 4>;
+			clocks = <&clock HI3620_UARTCLK0>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: uart@b01000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb01000 0x1000>;
+			interrupts = <0 21 4>;
+			clocks = <&clock HI3620_UARTCLK1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: uart@b02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb02000 0x1000>;
+			interrupts = <0 22 4>;
+			clocks = <&clock HI3620_UARTCLK2>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart3: uart@b03000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb03000 0x1000>;
+			interrupts = <0 23 4>;
+			clocks = <&clock HI3620_UARTCLK3>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		uart4: uart@b04000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xb04000 0x1000>;
+			interrupts = <0 24 4>;
+			clocks = <&clock HI3620_UARTCLK4>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		gpio0: gpio@806000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x806000 0x1000>;
+			interrupts = <0 64 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1
+					&pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@807000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x807000 0x1000>;
+			interrupts = <0 65 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+					&pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1
+					&pmx0 6 5 1 &pmx0 7 6 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@808000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x808000 0x1000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1
+					&pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1
+					&pmx0 6 3 1 &pmx0 7 3 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@809000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x809000 0x1000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+					&pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1
+					&pmx0 6 11 1 &pmx0 7 11 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@80a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80a000 0x1000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1
+					&pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1
+					&pmx0 6 13 1 &pmx0 7 13 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@80b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80b000 0x1000>;
+			interrupts = <0 69 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1
+					&pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1
+					&pmx0 6 16 1 &pmx0 7 16 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@80c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80c000 0x1000>;
+			interrupts = <0 70 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1
+					&pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1
+					&pmx0 6 18 1 &pmx0 7 19 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK6>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@80d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80d000 0x1000>;
+			interrupts = <0 71 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1
+					&pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1
+					&pmx0 6 25 1 &pmx0 7 26 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK7>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@80e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80e000 0x1000>;
+			interrupts = <0 72 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1
+					&pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1
+					&pmx0 6 33 1 &pmx0 7 34 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK8>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@80f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x80f000 0x1000>;
+			interrupts = <0 73 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1
+					&pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1
+					&pmx0 6 41 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK9>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@810000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x810000 0x1000>;
+			interrupts = <0 74 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1
+					&pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK10>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@811000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x811000 0x1000>;
+			interrupts = <0 75 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1
+					&pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1
+					&pmx0 6 49 1 &pmx0 7 49 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK11>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@812000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x812000 0x1000>;
+			interrupts = <0 76 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1
+					&pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1
+					&pmx0 6 51 1 &pmx0 7 52 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK12>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@813000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x813000 0x1000>;
+			interrupts = <0 77 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1
+					&pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1
+					&pmx0 6 55 1 &pmx0 7 56 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK13>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@814000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x814000 0x1000>;
+			interrupts = <0 78 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1
+					&pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1
+					&pmx0 6 60 1 &pmx0 7 61 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK14>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@815000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x815000 0x1000>;
+			interrupts = <0 79 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1
+					&pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1
+					&pmx0 6 64 1 &pmx0 7 65 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK15>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@816000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x816000 0x1000>;
+			interrupts = <0 80 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1
+					&pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1
+					&pmx0 6 72 1 &pmx0 7 73 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK16>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@817000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x817000 0x1000>;
+			interrupts = <0 81 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1
+					&pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1
+					&pmx0 6 80 1 &pmx0 7 81 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK17>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@818000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x818000 0x1000>;
+			interrupts = <0 82 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1
+					&pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1
+					&pmx0 6 86 1 &pmx0 7 87 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK18>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@819000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x819000 0x1000>;
+			interrupts = <0 83 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1
+					&pmx0 3 88 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK19>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio20: gpio@81a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x81a000 0x1000>;
+			interrupts = <0 84 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1
+					&pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK20>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio21: gpio@81b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x81b000 0x1000>;
+			interrupts = <0 85 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <	&pmx0 3 94 1 &pmx0 7 96 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clock HI3620_GPIOCLK21>;
+			clock-names = "apb_pclk";
+		};
+
+		pmx0: pinmux@803000 {
+			compatible = "pinctrl-single";
+			reg = <0x803000 0x188>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#gpio-range-cells = <3>;
+			ranges;
+
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <7>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
+						&range 12 1 0 &range 13 29 1
+						&range 43 1 0 &range 44 49 1
+						&range 94 1 1 &range 96 2 1>;
+
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+		};
+
+		pmx1: pinmux@803800 {
+			compatible = "pinconf-single";
+			reg = <0x803800 0x2dc>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pinctrl-single,register-width = <32>;
+		};
+	};
+};
diff --git a/src/arm/highbank.dts b/src/arm/highbank.dts
new file mode 100644
index 000000000000..ed14aeac0566
--- /dev/null
+++ b/src/arm/highbank.dts
@@ -0,0 +1,142 @@
+/*
+ * Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+
+/* First 4KB has pen for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+
+/ {
+	model = "Calxeda Highbank";
+	compatible = "calxeda,highbank";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clock-ranges;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@900 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x900>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
+		};
+
+		cpu@901 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x901>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@902 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x902>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+
+		cpu@903 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x903>;
+			next-level-cache = <&L2>;
+			clocks = <&a9pll>;
+			clock-names = "cpu";
+		};
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x00000000 0xff900000>;
+	};
+
+	soc {
+		ranges = <0x00000000 0x00000000 0xffffffff>;
+
+		memory-controller@fff00000 {
+			compatible = "calxeda,hb-ddr-ctrl";
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 91 4>;
+		};
+
+		timer@fff10600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xfff10600 0x20>;
+			interrupts = <1 13 0xf01>;
+			clocks = <&a9periphclk>;
+		};
+
+		watchdog@fff10620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xfff10620 0x20>;
+			interrupts = <1 14 0xf01>;
+			clocks = <&a9periphclk>;
+		};
+
+		intc: interrupt-controller@fff11000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0xfff11000 0x1000>,
+			      <0xfff10100 0x100>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0xfff12000 0x1000>;
+			interrupts = <0 70 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+		};
+
+
+		sregs@fff3c200 {
+			compatible = "calxeda,hb-sregs-l2-ecc";
+			reg = <0xfff3c200 0x100>;
+			interrupts = <0 71 4  0 72 4>;
+		};
+
+	};
+};
+
+/include/ "ecx-common.dtsi"
diff --git a/src/arm/hip01-ca9x2.dts b/src/arm/hip01-ca9x2.dts
new file mode 100644
index 000000000000..eca5e42770fe
--- /dev/null
+++ b/src/arm/hip01-ca9x2.dts
@@ -0,0 +1,51 @@
+/*
+ * Hisilicon Ltd. HiP01 SoC
+ *
+ * Copyright (C) 2014 Hisilicon Ltd.
+ * Copyright (C) 2014 Huawei Ltd.
+ *
+ * Author: Wang Long <long.wanglong@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/* First 8KB reserved for secondary core boot */
+/memreserve/ 0x80000000 0x00002000;
+
+#include "hip01.dtsi"
+
+/ {
+	model = "Hisilicon HIP01 Development Board";
+	compatible = "hisilicon,hip01-ca9x2", "hisilicon,hip01";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "hisilicon,hip01-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/hip01.dtsi b/src/arm/hip01.dtsi
new file mode 100644
index 000000000000..33130f8461c3
--- /dev/null
+++ b/src/arm/hip01.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Hisilicon Ltd. HiP01 SoC
+ *
+ * Copyright (c) 2014 Hisilicon Ltd.
+ * Copyright (c) 2014 Huawei Ltd.
+ *
+ * Author: Wang Long <long.wanglong@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	gic: interrupt-controller@1e001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1a001000 0x1000>, <0x1a000100 0x1000>;
+	};
+
+	hisi_refclk144mhz: refclk144mkhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <144000000>;
+		clock-output-names = "hisi:refclk144khz";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0x10000000 0x20000000>;
+
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "arm,amba-bus";
+			ranges;
+
+			uart0: uart@10001000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10001000 0x1000>;
+				clocks = <&hisi_refclk144mhz>;
+				clock-names = "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 32 4>;
+				status = "disabled";
+			};
+
+			uart1: uart@10002000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10002000 0x1000>;
+				clocks = <&hisi_refclk144mhz>;
+				clock-names = "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 33 4>;
+				status = "disabled";
+			};
+
+			uart2: uart@10003000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10003000 0x1000>;
+				clocks = <&hisi_refclk144mhz>;
+				clock-names = "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 34 4>;
+				status = "disabled";
+			};
+
+			uart3: uart@10006000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x10006000 0x1000>;
+				clocks = <&hisi_refclk144mhz>;
+				clock-names = "apb_pclk";
+				reg-shift = <2>;
+				interrupts = <0 4 4>;
+				status = "disabled";
+			};
+		};
+
+		system-controller@10000000 {
+			compatible = "hisilicon,hip01-sysctrl", "hisilicon,sysctrl";
+			reg = <0x10000000 0x1000>;
+			reboot-offset = <0x4>;
+		};
+
+		global_timer@0a000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x0a000200 0x100>;
+			interrupts = <1 11 0xf04>;
+			clocks = <&hisi_refclk144mhz>;
+		};
+
+		local_timer@0a000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x0a000600 0x100>;
+			interrupts = <1 13 0xf04>;
+			clocks = <&hisi_refclk144mhz>;
+		};
+	};
+};
diff --git a/src/arm/hip04-d01.dts b/src/arm/hip04-d01.dts
new file mode 100644
index 000000000000..40a9e33c2654
--- /dev/null
+++ b/src/arm/hip04-d01.dts
@@ -0,0 +1,32 @@
+/*
+ *  Copyright (C) 2013-2014 Linaro Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "hip04.dtsi"
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "Hisilicon D01 Development Board";
+	compatible = "hisilicon,hip04-d01";
+
+	memory@00000000,10000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000 0x00000000 0xc0000000>,
+		      <0x00000004 0xc0000000 0x00000003 0x40000000>;
+	};
+
+	soc {
+		uart0: uart@4007000 {
+			status = "ok";
+		};
+	};
+};
diff --git a/src/arm/hip04.dtsi b/src/arm/hip04.dtsi
new file mode 100644
index 000000000000..238814596a87
--- /dev/null
+++ b/src/arm/hip04.dtsi
@@ -0,0 +1,984 @@
+/*
+ * Hisilicon Ltd. HiP04 SoC
+ *
+ * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	bootwrapper {
+		compatible = "hisilicon,hip04-bootwrapper";
+		boot-method = <0x10c00000 0x10000>, <0xe0000100 0x1000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+		};
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+		};
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+		};
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+		};
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+		};
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+		};
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+		};
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+		};
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+		};
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+		};
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+		};
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	clk_50m: clk_50m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	clk_168m: clk_168m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <168000000>;
+	};
+
+	clk_375m: clk_375m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <375000000>;
+	};
+
+	soc {
+		/* It's a 32-bit SoC. */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0 0xe0000000 0x10000000>;
+
+		gic: interrupt-controller@c01000 {
+			compatible = "hisilicon,hip04-intc";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <1 9 0xf04>;
+
+			reg = <0xc01000 0x1000>, <0xc02000 0x1000>,
+			      <0xc04000 0x2000>, <0xc06000 0x2000>;
+		};
+
+		sysctrl: sysctrl {
+			compatible = "hisilicon,sysctrl";
+			reg = <0x3e00000 0x00100000>;
+		};
+
+		fabric: fabric {
+			compatible = "hisilicon,hip04-fabric";
+			reg = <0x302a000 0x1000>;
+		};
+
+		dual_timer0: dual_timer@3000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x3000000 0x1000>;
+			interrupts = <0 224 4>;
+			clocks = <&clk_50m>, <&clk_50m>;
+			clock-names = "apb_pclk";
+		};
+
+		arm-pmu {
+			compatible = "arm,cortex-a15-pmu";
+			interrupts = <0 64 4>,
+				     <0 65 4>,
+				     <0 66 4>,
+				     <0 67 4>,
+				     <0 68 4>,
+				     <0 69 4>,
+				     <0 70 4>,
+				     <0 71 4>,
+				     <0 72 4>,
+				     <0 73 4>,
+				     <0 74 4>,
+				     <0 75 4>,
+				     <0 76 4>,
+				     <0 77 4>,
+				     <0 78 4>,
+				     <0 79 4>;
+		};
+
+		uart0: uart@4007000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x4007000 0x1000>;
+			interrupts = <0 381 4>;
+			clocks = <&clk_168m>;
+			clock-names = "uartclk";
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		sata0: sata@a000000 {
+			compatible = "hisilicon,hisi-ahci";
+			reg = <0xa000000 0x1000000>;
+			interrupts = <0 372 4>;
+		};
+
+	};
+
+	etb@0,e3c42000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3c42000 0 0x1000>;
+
+		coresight-default-sink;
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		port {
+			etb0_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator0_out_port0>;
+			};
+		};
+	};
+
+	etb@0,e3c82000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3c82000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		port {
+			etb1_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator1_out_port0>;
+			};
+		};
+	};
+
+	etb@0,e3cc2000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3cc2000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		port {
+			etb2_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator2_out_port0>;
+			};
+		};
+	};
+
+	etb@0,e3d02000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3d02000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		port {
+			etb3_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator3_out_port0>;
+			};
+		};
+	};
+
+	tpiu@0,e3c05000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0xe3c05000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		port {
+			tpiu_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&funnel4_out_port0>;
+			};
+		};
+	};
+
+	replicator0 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator0_out_port0: endpoint {
+					remote-endpoint = <&etb0_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator0_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port0>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator0_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel0_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator1 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator1_out_port0: endpoint {
+					remote-endpoint = <&etb1_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator1_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port1>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator1_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel1_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator2 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator2_out_port0: endpoint {
+					remote-endpoint = <&etb2_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+					replicator2_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port2>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator2_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel2_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator3 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator3_out_port0: endpoint {
+					remote-endpoint = <&etb3_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator3_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port3>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator3_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel3_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c41000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0xe3c41000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel0_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator0_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel0_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel0_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel0_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm2_out_port>;
+				};
+			};
+
+			port@4 {
+				reg = <3>;
+				funnel0_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm3_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c81000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0xe3c81000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel1_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator1_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel1_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm4_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel1_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm5_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel1_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm6_out_port>;
+				};
+			};
+
+			port@4 {
+				reg = <3>;
+				funnel1_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm7_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3cc1000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0xe3cc1000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel2_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator2_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel2_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm8_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel2_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm9_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel2_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm10_out_port>;
+				};
+			};
+
+			port@4 {
+				reg = <3>;
+				funnel2_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm11_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3d01000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0xe3d01000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel3_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator3_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel3_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm12_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel3_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm13_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel3_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm14_out_port>;
+				};
+			};
+
+			port@4 {
+				reg = <3>;
+				funnel3_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm15_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c04000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0xe3c04000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel4_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel4_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint =
+						<&replicator0_out_port1>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel4_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint =
+						<&replicator1_out_port1>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel4_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint =
+						<&replicator2_out_port1>;
+				};
+			};
+
+			port@4 {
+				reg = <3>;
+				funnel4_in_port3: endpoint {
+					slave-mode;
+					remote-endpoint =
+						<&replicator3_out_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7c000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU0>;
+		port {
+			ptm0_out_port: endpoint {
+				remote-endpoint = <&funnel0_in_port0>;
+			};
+		};
+	};
+
+	ptm@0,e3c7d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7d000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU1>;
+		port {
+			ptm1_out_port: endpoint {
+				remote-endpoint = <&funnel0_in_port1>;
+			};
+		};
+	};
+
+	ptm@0,e3c7e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7e000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU2>;
+		port {
+			ptm2_out_port: endpoint {
+				remote-endpoint = <&funnel0_in_port2>;
+			};
+		};
+	};
+
+	ptm@0,e3c7f000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7f000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU3>;
+		port {
+			ptm3_out_port: endpoint {
+				remote-endpoint = <&funnel0_in_port3>;
+			};
+		};
+	};
+
+	ptm@0,e3cbc000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbc000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU4>;
+		port {
+			ptm4_out_port: endpoint {
+				remote-endpoint = <&funnel1_in_port0>;
+			};
+		};
+	};
+
+	ptm@0,e3cbd000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbd000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU5>;
+		port {
+			ptm5_out_port: endpoint {
+				remote-endpoint = <&funnel1_in_port1>;
+			};
+		};
+	};
+
+	ptm@0,e3cbe000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbe000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU6>;
+		port {
+			ptm6_out_port: endpoint {
+				remote-endpoint = <&funnel1_in_port2>;
+			};
+		};
+	};
+
+	ptm@0,e3cbf000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbf000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU7>;
+		port {
+			ptm7_out_port: endpoint {
+				remote-endpoint = <&funnel1_in_port3>;
+			};
+		};
+	};
+
+	ptm@0,e3cfc000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfc000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU8>;
+		port {
+			ptm8_out_port: endpoint {
+				remote-endpoint = <&funnel2_in_port0>;
+			};
+		};
+	};
+
+	ptm@0,e3cfd000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfd000 0 0x1000>;
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU9>;
+		port {
+			ptm9_out_port: endpoint {
+				remote-endpoint = <&funnel2_in_port1>;
+			};
+		};
+	};
+
+	ptm@0,e3cfe000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfe000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU10>;
+		port {
+			ptm10_out_port: endpoint {
+				remote-endpoint = <&funnel2_in_port2>;
+			};
+		};
+	};
+
+	ptm@0,e3cff000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cff000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU11>;
+		port {
+			ptm11_out_port: endpoint {
+				remote-endpoint = <&funnel2_in_port3>;
+			};
+		};
+	};
+
+	ptm@0,e3d3c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3c000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU12>;
+		port {
+			ptm12_out_port: endpoint {
+				remote-endpoint = <&funnel3_in_port0>;
+			};
+		};
+	};
+
+	ptm@0,e3d3d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3d000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU13>;
+		port {
+			ptm13_out_port: endpoint {
+				remote-endpoint = <&funnel3_in_port1>;
+			};
+		};
+	};
+
+	ptm@0,e3d3e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3e000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU14>;
+		port {
+			ptm14_out_port: endpoint {
+				remote-endpoint = <&funnel3_in_port2>;
+			};
+		};
+	};
+
+	ptm@0,e3d3f000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3f000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU15>;
+		port {
+			ptm15_out_port: endpoint {
+				remote-endpoint = <&funnel3_in_port3>;
+			};
+		};
+	};
+};
diff --git a/src/arm/hisi-x5hd2-dkb.dts b/src/arm/hisi-x5hd2-dkb.dts
new file mode 100644
index 000000000000..721b09238f58
--- /dev/null
+++ b/src/arm/hisi-x5hd2-dkb.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright (c) 2013-2014 Linaro Ltd.
+ * Copyright (c) 2013-2014 Hisilicon Limited.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "hisi-x5hd2.dtsi"
+
+/ {
+	model = "Hisilicon HIX5HD2 Development Board";
+	compatible = "hisilicon,hix5hd2";
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200 earlyprintk";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "hisilicon,hix5hd2-smp";
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&l2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+};
+
+&timer0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-handle = <&phy2>;
+	phy-mode = "mii";
+	/* Placeholder, overwritten by bootloader */
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&gmac1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	/* Placeholder, overwritten by bootloader */
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ahci {
+	phys = <&sata_phy>;
+	phy-names = "sata-phy";
+};
diff --git a/src/arm/hisi-x5hd2.dtsi b/src/arm/hisi-x5hd2.dtsi
new file mode 100644
index 000000000000..c52722b14e4a
--- /dev/null
+++ b/src/arm/hisi-x5hd2.dtsi
@@ -0,0 +1,556 @@
+/*
+ * Copyright (c) 2013-2014 Linaro Ltd.
+ * Copyright (c) 2013-2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/hix5hd2-clock.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	gic: interrupt-controller@f8a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		/* gic dist base, gic cpu base */
+		reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0xf8000000 0x8000000>;
+
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "arm,amba-bus";
+			ranges;
+
+			timer0: timer@00002000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00002000 0x1000>;
+				/* timer00 & timer01 */
+				interrupts = <0 24 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer1: timer@00a29000 {
+				/*
+				 * Only used in NORMAL state, not available ins
+				 * SLOW or DOZE state.
+				 * The rate is fixed in 24MHz.
+				 */
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a29000 0x1000>;
+				/* timer10 & timer11 */
+				interrupts = <0 25 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer2: timer@00a2a000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a2a000 0x1000>;
+				/* timer20 & timer21 */
+				interrupts = <0 26 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer3: timer@00a2b000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a2b000 0x1000>;
+				/* timer30 & timer31 */
+				interrupts = <0 27 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			timer4: timer@00a81000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x00a81000 0x1000>;
+				/* timer30 & timer31 */
+				interrupts = <0 28 4>;
+				clocks = <&clock HIX5HD2_FIXED_24M>;
+				status = "disabled";
+			};
+
+			uart0: uart@00b00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b00000 0x1000>;
+				interrupts = <0 49 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart1: uart@00006000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00006000 0x1000>;
+				interrupts = <0 50 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart2: uart@00b02000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b02000 0x1000>;
+				interrupts = <0 51 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart3: uart@00b03000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x00b03000 0x1000>;
+				interrupts = <0 52 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			uart4: uart@00b04000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb04000 0x1000>;
+				interrupts = <0 53 4>;
+				clocks = <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "apb_pclk";
+				status = "disabled";
+			};
+
+			gpio0: gpio@b20000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb20000 0x1000>;
+				interrupts = <0 108 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@b21000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb21000 0x1000>;
+				interrupts = <0 109 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio2: gpio@b22000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb22000 0x1000>;
+				interrupts = <0 110 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio3: gpio@b23000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb23000 0x1000>;
+				interrupts = <0 111 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio4: gpio@b24000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb24000 0x1000>;
+				interrupts = <0 112 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio5: gpio@004000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0x004000 0x1000>;
+				interrupts = <0 113 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio6: gpio@b26000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb26000 0x1000>;
+				interrupts = <0 114 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio7: gpio@b27000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb27000 0x1000>;
+				interrupts = <0 115 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio8: gpio@b28000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb28000 0x1000>;
+				interrupts = <0 116 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio9: gpio@b29000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb29000 0x1000>;
+				interrupts = <0 117 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio10: gpio@b2a000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2a000 0x1000>;
+				interrupts = <0 118 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio11: gpio@b2b000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2b000 0x1000>;
+				interrupts = <0 119 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio12: gpio@b2c000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2c000 0x1000>;
+				interrupts = <0 120 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio13: gpio@b2d000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2d000 0x1000>;
+				interrupts = <0 121 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio14: gpio@b2e000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2e000 0x1000>;
+				interrupts = <0 122 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio15: gpio@b2f000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb2f000 0x1000>;
+				interrupts = <0 123 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio16: gpio@b30000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb30000 0x1000>;
+				interrupts = <0 124 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio17: gpio@b31000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xb31000 0x1000>;
+				interrupts = <0 125 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&clock HIX5HD2_FIXED_100M>;
+				clock-names = "apb_pclk";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			wdt0: watchdog@a2c000 {
+				compatible = "arm,sp805", "arm,primecell";
+				arm,primecell-periphid = <0x00141805>;
+				reg = <0xa2c000 0x1000>;
+				interrupts = <0 29 4>;
+				clocks = <&clock HIX5HD2_WDG0_RST>;
+				clock-names = "apb_pclk";
+			};
+		};
+
+		local_timer@00a00600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x00a00600 0x20>;
+			interrupts = <1 13 0xf01>;
+		};
+
+		l2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a10000 0x100000>;
+			interrupts = <0 15 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		sysctrl: system-controller@00000000 {
+			compatible = "hisilicon,sysctrl", "syscon";
+			reg = <0x00000000 0x1000>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&sysctrl>;
+			offset = <0x4>;
+			mask = <0xdeadbeef>;
+		};
+
+		cpuctrl@00a22000 {
+			compatible = "hisilicon,cpuctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00a22000 0x2000>;
+			ranges = <0 0x00a22000 0x2000>;
+
+			clock: clock@0 {
+				compatible = "hisilicon,hix5hd2-clock";
+				reg = <0 0x2000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		/* unremovable emmc as mmcblk0 */
+		mmc: mmc@1830000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x1830000 0x1000>;
+			interrupts = <0 35 4>;
+			clocks = <&clock HIX5HD2_MMC_CIU_RST>,
+				 <&clock HIX5HD2_MMC_BIU_CLK>;
+			clock-names = "ciu", "biu";
+		};
+
+		sd: mmc@1820000 {
+			compatible = "snps,dw-mshc";
+			reg = <0x1820000 0x1000>;
+			interrupts = <0 34 4>;
+			clocks = <&clock HIX5HD2_SD_CIU_RST>,
+				 <&clock HIX5HD2_SD_BIU_CLK>;
+			clock-names = "ciu","biu";
+		};
+
+		gmac0: ethernet@1840000 {
+			compatible = "hisilicon,hix5hd2-gmac";
+			reg = <0x1840000 0x1000>,<0x184300c 0x4>;
+			interrupts = <0 71 4>;
+			clocks = <&clock HIX5HD2_MAC0_CLK>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@1841000 {
+			compatible = "hisilicon,hix5hd2-gmac";
+			reg = <0x1841000 0x1000>,<0x1843010 0x4>;
+			interrupts = <0 72 4>;
+			clocks = <&clock HIX5HD2_MAC1_CLK>;
+			status = "disabled";
+		};
+
+		usb0: ehci@1890000 {
+			compatible = "generic-ehci";
+			reg = <0x1890000 0x1000>;
+			interrupts = <0 66 4>;
+			clocks = <&clock HIX5HD2_USB_CLK>;
+		};
+
+		usb1: ohci@1880000 {
+			compatible = "generic-ohci";
+			reg = <0x1880000 0x1000>;
+			interrupts = <0 67 4>;
+			clocks = <&clock HIX5HD2_USB_CLK>;
+		};
+
+		peripheral_ctrl: syscon@a20000 {
+			compatible = "syscon";
+			reg = <0xa20000 0x1000>;
+		};
+
+		sata_phy: phy@1900000 {
+			compatible = "hisilicon,hix5hd2-sata-phy";
+			reg = <0x1900000 0x10000>;
+			#phy-cells = <0>;
+			hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+			hisilicon,power-reg = <0x8 10>;
+		};
+
+		ahci: sata@1900000 {
+			compatible = "hisilicon,hisi-ahci";
+			reg = <0x1900000 0x10000>;
+			interrupts = <0 70 4>;
+			clocks = <&clock HIX5HD2_SATA_CLK>;
+		};
+
+		ir: ir@001000 {
+			compatible = "hisilicon,hix5hd2-ir";
+			reg = <0x001000 0x1000>;
+			interrupts = <0 47 4>;
+			clocks = <&clock HIX5HD2_FIXED_24M>;
+			hisilicon,power-syscon = <&sysctrl>;
+		};
+
+		i2c0: i2c@b10000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb10000 0x1000>;
+			interrupts = <0 38 4>;
+			clocks = <&clock HIX5HD2_I2C0_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@b11000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb11000 0x1000>;
+			interrupts = <0 39 4>;
+			clocks = <&clock HIX5HD2_I2C1_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@b12000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb12000 0x1000>;
+			interrupts = <0 40 4>;
+			clocks = <&clock HIX5HD2_I2C2_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@b13000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb13000 0x1000>;
+			interrupts = <0 41 4>;
+			clocks = <&clock HIX5HD2_I2C3_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@b16000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb16000 0x1000>;
+			interrupts = <0 43 4>;
+			clocks = <&clock HIX5HD2_I2C4_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@b17000 {
+			compatible = "hisilicon,hix5hd2-i2c";
+			reg = <0xb17000 0x1000>;
+			interrupts = <0 44 4>;
+			clocks = <&clock HIX5HD2_I2C5_RST>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/imx1-ads.dts b/src/arm/imx1-ads.dts
new file mode 100644
index 000000000000..af4eee5794aa
--- /dev/null
+++ b/src/arm/imx1-ads.dts
@@ -0,0 +1,152 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx1.dtsi"
+
+/ {
+	model = "Freescale MX1 ADS";
+	compatible = "fsl,imx1ads", "fsl,imx1";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x08000000 0x04000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32 {
+			compatible = "fsl,imx-clk32", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c>;
+	status = "okay";
+
+	extgpio0: pcf8575@22 {
+		compatible = "nxp,pcf8575";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	extgpio1: pcf8575@24 {
+		compatible = "nxp,pcf8575";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	nor: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <4>;
+		fsl,weim-cs-timing = <0x00003e00 0x00000801>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&iomuxc {
+	imx1-ads {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX1_PAD_SPI1_MISO__SPI1_MISO	0x0
+				MX1_PAD_SPI1_MOSI__SPI1_MOSI	0x0
+				MX1_PAD_SPI1_RDY__SPI1_RDY	0x0
+				MX1_PAD_SPI1_SCLK__SPI1_SCLK	0x0
+				MX1_PAD_SPI1_SS__GPIO3_15	0x0
+			>;
+		};
+
+		pinctrl_i2c: i2cgrp {
+			fsl,pins = <
+				MX1_PAD_I2C_SCL__I2C_SCL	0x0
+				MX1_PAD_I2C_SDA__I2C_SDA	0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX1_PAD_UART1_TXD__UART1_TXD	0x0
+				MX1_PAD_UART1_RXD__UART1_RXD	0x0
+				MX1_PAD_UART1_CTS__UART1_CTS	0x0
+				MX1_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX1_PAD_UART2_TXD__UART2_TXD	0x0
+				MX1_PAD_UART2_RXD__UART2_RXD	0x0
+				MX1_PAD_UART2_CTS__UART2_CTS	0x0
+				MX1_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX1_PAD_A0__A0			0x0
+				MX1_PAD_A16__A16		0x0
+				MX1_PAD_A17__A17		0x0
+				MX1_PAD_A18__A18		0x0
+				MX1_PAD_A19__A19		0x0
+				MX1_PAD_A20__A20		0x0
+				MX1_PAD_A21__A21		0x0
+				MX1_PAD_A22__A22		0x0
+				MX1_PAD_A23__A23		0x0
+				MX1_PAD_A24__A24		0x0
+				MX1_PAD_BCLK__BCLK		0x0
+				MX1_PAD_CS4__CS4		0x0
+				MX1_PAD_DTACK__DTACK		0x0
+				MX1_PAD_ECB__ECB		0x0
+				MX1_PAD_LBA__LBA		0x0
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx1-apf9328.dts b/src/arm/imx1-apf9328.dts
new file mode 100644
index 000000000000..07d92fb40e6f
--- /dev/null
+++ b/src/arm/imx1-apf9328.dts
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx1.dtsi"
+
+/ {
+	model = "Armadeus APF9328";
+	compatible = "armadeus,imx1-apf9328", "fsl,imx1";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x08000000 0x00800000>;
+	};
+};
+
+&i2c {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	nor: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00330e04 0x00000d01>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	eth: eth@4,c00000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth>;
+		compatible = "davicom,dm9000";
+		reg = <
+			4 0x00c00000 0x2
+			4 0x00c00002 0x2
+		>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		fsl,weim-cs-timing = <0x0000c700 0x19190d01>;
+	};
+};
+
+&iomuxc {
+	imx1-apf9328 {
+		pinctrl_eth: ethgrp {
+			fsl,pins = <
+				MX1_PAD_SIM_SVEN__GPIO2_14	0x0
+			>;
+		};
+
+		pinctrl_i2c: i2cgrp {
+			fsl,pins = <
+				MX1_PAD_I2C_SCL__I2C_SCL	0x0
+				MX1_PAD_I2C_SDA__I2C_SDA	0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX1_PAD_UART1_TXD__UART1_TXD	0x0
+				MX1_PAD_UART1_RXD__UART1_RXD	0x0
+				MX1_PAD_UART1_CTS__UART1_CTS	0x0
+				MX1_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX1_PAD_UART2_TXD__UART2_TXD	0x0
+				MX1_PAD_UART2_RXD__UART2_RXD	0x0
+				MX1_PAD_UART2_CTS__UART2_CTS	0x0
+				MX1_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX1_PAD_A0__A0			0x0
+				MX1_PAD_A16__A16		0x0
+				MX1_PAD_A17__A17		0x0
+				MX1_PAD_A18__A18		0x0
+				MX1_PAD_A19__A19		0x0
+				MX1_PAD_A20__A20		0x0
+				MX1_PAD_A21__A21		0x0
+				MX1_PAD_A22__A22		0x0
+				MX1_PAD_A23__A23		0x0
+				MX1_PAD_A24__A24		0x0
+				MX1_PAD_BCLK__BCLK		0x0
+				MX1_PAD_CS4__CS4		0x0
+				MX1_PAD_DTACK__DTACK		0x0
+				MX1_PAD_ECB__ECB		0x0
+				MX1_PAD_LBA__LBA		0x0
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx1-pinfunc.h b/src/arm/imx1-pinfunc.h
new file mode 100644
index 000000000000..22bec8b87680
--- /dev/null
+++ b/src/arm/imx1-pinfunc.h
@@ -0,0 +1,302 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_IMX1_PINFUNC_H
+#define __DTS_IMX1_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function:      0 - Primary function
+ *                1 - Alternate function
+ *                2 - GPIO
+ * direction:     0 - Input
+ *                1 - Output
+ * gpio_oconf:    0 - A_IN
+ *                1 - B_IN
+ *                2 - A_OUT
+ *                3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ *                1 - Interrupt Status Register
+ *                2 - 0
+ *                3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ * number on the specific port (between 0 and 31).
+ */
+
+#define MX1_PAD_A24__A24			0x00 0x004
+#define MX1_PAD_A24__GPIO1_0			0x00 0x032
+#define MX1_PAD_A24__SPI2_CLK			0x00 0x006
+#define MX1_PAD_TIN__TIN			0x01 0x000
+#define MX1_PAD_TIN__GPIO1_1			0x01 0x032
+#define MX1_PAD_TIN__SPI2_RXD			0x01 0x022
+#define MX1_PAD_PWMO__PWMO			0x02 0x004
+#define MX1_PAD_PWMO__GPIO1_2			0x02 0x032
+#define MX1_PAD_CSI_MCLK__CSI_MCLK		0x03 0x004
+#define MX1_PAD_CSI_MCLK__GPIO1_3		0x03 0x032
+#define MX1_PAD_CSI_D0__CSI_D0			0x04 0x000
+#define MX1_PAD_CSI_D0__GPIO1_4			0x04 0x032
+#define MX1_PAD_CSI_D1__CSI_D1			0x05 0x000
+#define MX1_PAD_CSI_D1__GPIO1_5			0x05 0x032
+#define MX1_PAD_CSI_D2__CSI_D2			0x06 0x000
+#define MX1_PAD_CSI_D2__GPIO1_6			0x06 0x032
+#define MX1_PAD_CSI_D3__CSI_D3			0x07 0x000
+#define MX1_PAD_CSI_D3__GPIO1_7			0x07 0x032
+#define MX1_PAD_CSI_D4__CSI_D4			0x08 0x000
+#define MX1_PAD_CSI_D4__GPIO1_8			0x08 0x032
+#define MX1_PAD_CSI_D5__CSI_D5			0x09 0x000
+#define MX1_PAD_CSI_D5__GPIO1_9			0x09 0x032
+#define MX1_PAD_CSI_D6__CSI_D6			0x0a 0x000
+#define MX1_PAD_CSI_D6__GPIO1_10		0x0a 0x032
+#define MX1_PAD_CSI_D7__CSI_D7			0x0b 0x000
+#define MX1_PAD_CSI_D7__GPIO1_11		0x0b 0x032
+#define MX1_PAD_CSI_VSYNC__CSI_VSYNC		0x0c 0x000
+#define MX1_PAD_CSI_VSYNC__GPIO1_12		0x0c 0x032
+#define MX1_PAD_CSI_HSYNC__CSI_HSYNC		0x0d 0x000
+#define MX1_PAD_CSI_HSYNC__GPIO1_13		0x0d 0x032
+#define MX1_PAD_CSI_PIXCLK__CSI_PIXCLK		0x0e 0x000
+#define MX1_PAD_CSI_PIXCLK__GPIO1_14		0x0e 0x032
+#define MX1_PAD_I2C_SDA__I2C_SDA		0x0f 0x000
+#define MX1_PAD_I2C_SDA__GPIO1_15		0x0f 0x032
+#define MX1_PAD_I2C_SCL__I2C_SCL		0x10 0x004
+#define MX1_PAD_I2C_SCL__GPIO1_16		0x10 0x032
+#define MX1_PAD_DTACK__DTACK			0x11 0x000
+#define MX1_PAD_DTACK__GPIO1_17			0x11 0x032
+#define MX1_PAD_DTACK__SPI2_SS			0x11 0x002
+#define MX1_PAD_DTACK__A25			0x11 0x016
+#define MX1_PAD_BCLK__BCLK			0x12 0x004
+#define MX1_PAD_BCLK__GPIO1_18			0x12 0x032
+#define MX1_PAD_LBA__LBA			0x13 0x004
+#define MX1_PAD_LBA__GPIO1_19			0x13 0x032
+#define MX1_PAD_ECB__ECB			0x14 0x000
+#define MX1_PAD_ECB__GPIO1_20			0x14 0x032
+#define MX1_PAD_A0__A0				0x15 0x004
+#define MX1_PAD_A0__GPIO1_21			0x15 0x032
+#define MX1_PAD_CS4__CS4			0x16 0x004
+#define MX1_PAD_CS4__GPIO1_22			0x16 0x032
+#define MX1_PAD_CS5__CS5			0x17 0x004
+#define MX1_PAD_CS5__GPIO1_23			0x17 0x032
+#define MX1_PAD_A16__A16			0x18 0x004
+#define MX1_PAD_A16__GPIO1_24			0x18 0x032
+#define MX1_PAD_A17__A17			0x19 0x004
+#define MX1_PAD_A17__GPIO1_25			0x19 0x032
+#define MX1_PAD_A18__A18			0x1a 0x004
+#define MX1_PAD_A18__GPIO1_26			0x1a 0x032
+#define MX1_PAD_A19__A19			0x1b 0x004
+#define MX1_PAD_A19__GPIO1_27			0x1b 0x032
+#define MX1_PAD_A20__A20			0x1c 0x004
+#define MX1_PAD_A20__GPIO1_28			0x1c 0x032
+#define MX1_PAD_A21__A21			0x1d 0x004
+#define MX1_PAD_A21__GPIO1_29			0x1d 0x032
+#define MX1_PAD_A22__A22			0x1e 0x004
+#define MX1_PAD_A22__GPIO1_30			0x1e 0x032
+#define MX1_PAD_A23__A23			0x1f 0x004
+#define MX1_PAD_A23__GPIO1_31			0x1f 0x032
+#define MX1_PAD_SD_DAT0__SD_DAT0		0x28 0x000
+#define MX1_PAD_SD_DAT0__MS_PI0			0x28 0x001
+#define MX1_PAD_SD_DAT0__GPIO2_8		0x28 0x032
+#define MX1_PAD_SD_DAT1__SD_DAT1		0x29 0x000
+#define MX1_PAD_SD_DAT1__MS_PI1			0x29 0x001
+#define MX1_PAD_SD_DAT1__GPIO2_9		0x29 0x032
+#define MX1_PAD_SD_DAT2__SD_DAT2		0x2a 0x000
+#define MX1_PAD_SD_DAT2__MS_SCLKI		0x2a 0x001
+#define MX1_PAD_SD_DAT2__GPIO2_10		0x2a 0x032
+#define MX1_PAD_SD_DAT3__SD_DAT3		0x2b 0x000
+#define MX1_PAD_SD_DAT3__MS_SDIO		0x2b 0x001
+#define MX1_PAD_SD_DAT3__GPIO2_11		0x2b 0x032
+#define MX1_PAD_SD_SCLK__SD_SCLK		0x2c 0x004
+#define MX1_PAD_SD_SCLK__MS_SCLKO		0x2c 0x005
+#define MX1_PAD_SD_SCLK__GPIO2_12		0x2c 0x032
+#define MX1_PAD_SD_CMD__SD_CMD			0x2d 0x000
+#define MX1_PAD_SD_CMD__MS_BS			0x2d 0x005
+#define MX1_PAD_SD_CMD__GPIO2_13		0x2d 0x032
+#define MX1_PAD_SIM_SVEN__SIM_SVEN		0x2e 0x004
+#define MX1_PAD_SIM_SVEN__SSI_RXFS		0x2e 0x001
+#define MX1_PAD_SIM_SVEN__GPIO2_14		0x2e 0x032
+#define MX1_PAD_SIM_PD__SIM_PD			0x2f 0x000
+#define MX1_PAD_SIM_PD__SSI_RXCLK		0x2f 0x001
+#define MX1_PAD_SIM_PD__GPIO2_15		0x2f 0x032
+#define MX1_PAD_SIM_TX__SIM_TX			0x30 0x000
+#define MX1_PAD_SIM_TX__SSI_RXDAT		0x30 0x001
+#define MX1_PAD_SIM_TX__GPIO2_16		0x30 0x032
+#define MX1_PAD_SIM_RX__SIM_RX			0x31 0x000
+#define MX1_PAD_SIM_RX__SSI_TXDAT		0x31 0x005
+#define MX1_PAD_SIM_RX__GPIO2_17		0x31 0x032
+#define MX1_PAD_SIM_RST__SIM_RST		0x32 0x004
+#define MX1_PAD_SIM_RST__SSI_TXFS		0x32 0x001
+#define MX1_PAD_SIM_RST__GPIO2_18		0x32 0x032
+#define MX1_PAD_SIM_CLK__SIM_CLK		0x33 0x004
+#define MX1_PAD_SIM_CLK__SSI_TXCLK		0x33 0x001
+#define MX1_PAD_SIM_CLK__GPIO2_19		0x33 0x032
+#define MX1_PAD_USBD_AFE__USBD_AFE		0x34 0x004
+#define MX1_PAD_USBD_AFE__GPIO2_20		0x34 0x032
+#define MX1_PAD_USBD_OE__USBD_OE		0x35 0x004
+#define MX1_PAD_USBD_OE__GPIO2_21		0x35 0x032
+#define MX1_PAD_USBD_RCV__USBD_RCV		0x36 0x000
+#define MX1_PAD_USBD_RCV__GPIO2_22		0x36 0x032
+#define MX1_PAD_USBD_SUSPND__USBD_SUSPND	0x37 0x004
+#define MX1_PAD_USBD_SUSPND__GPIO2_23		0x37 0x032
+#define MX1_PAD_USBD_VP__USBD_VP		0x38 0x000
+#define MX1_PAD_USBD_VP__GPIO2_24		0x38 0x032
+#define MX1_PAD_USBD_VM__USBD_VM		0x39 0x000
+#define MX1_PAD_USBD_VM__GPIO2_25		0x39 0x032
+#define MX1_PAD_USBD_VPO__USBD_VPO		0x3a 0x004
+#define MX1_PAD_USBD_VPO__GPIO2_26		0x3a 0x032
+#define MX1_PAD_USBD_VMO__USBD_VMO		0x3b 0x004
+#define MX1_PAD_USBD_VMO__GPIO2_27		0x3b 0x032
+#define MX1_PAD_UART2_CTS__UART2_CTS		0x3c 0x004
+#define MX1_PAD_UART2_CTS__GPIO2_28		0x3c 0x032
+#define MX1_PAD_UART2_RTS__UART2_RTS		0x3d 0x000
+#define MX1_PAD_UART2_RTS__GPIO2_29		0x3d 0x032
+#define MX1_PAD_UART2_TXD__UART2_TXD		0x3e 0x004
+#define MX1_PAD_UART2_TXD__GPIO2_30		0x3e 0x032
+#define MX1_PAD_UART2_RXD__UART2_RXD		0x3f 0x000
+#define MX1_PAD_UART2_RXD__GPIO2_31		0x3f 0x032
+#define MX1_PAD_SSI_RXFS__SSI_RXFS		0x43 0x000
+#define MX1_PAD_SSI_RXFS__GPIO3_3		0x43 0x032
+#define MX1_PAD_SSI_RXCLK__SSI_RXCLK		0x44 0x000
+#define MX1_PAD_SSI_RXCLK__GPIO3_4		0x44 0x032
+#define MX1_PAD_SSI_RXDAT__SSI_RXDAT		0x45 0x000
+#define MX1_PAD_SSI_RXDAT__GPIO3_5		0x45 0x032
+#define MX1_PAD_SSI_TXDAT__SSI_TXDAT		0x46 0x004
+#define MX1_PAD_SSI_TXDAT__GPIO3_6		0x46 0x032
+#define MX1_PAD_SSI_TXFS__SSI_TXFS		0x47 0x000
+#define MX1_PAD_SSI_TXFS__GPIO3_7		0x47 0x032
+#define MX1_PAD_SSI_TXCLK__SSI_TXCLK		0x48 0x000
+#define MX1_PAD_SSI_TXCLK__GPIO3_8		0x48 0x032
+#define MX1_PAD_UART1_CTS__UART1_CTS		0x49 0x004
+#define MX1_PAD_UART1_CTS__GPIO3_9		0x49 0x032
+#define MX1_PAD_UART1_RTS__UART1_RTS		0x4a 0x000
+#define MX1_PAD_UART1_RTS__GPIO3_10		0x4a 0x032
+#define MX1_PAD_UART1_TXD__UART1_TXD		0x4b 0x004
+#define MX1_PAD_UART1_TXD__GPIO3_11		0x4b 0x032
+#define MX1_PAD_UART1_RXD__UART1_RXD		0x4c 0x000
+#define MX1_PAD_UART1_RXD__GPIO3_12		0x4c 0x032
+#define MX1_PAD_SPI1_RDY__SPI1_RDY		0x4d 0x000
+#define MX1_PAD_SPI1_RDY__GPIO3_13		0x4d 0x032
+#define MX1_PAD_SPI1_SCLK__SPI1_SCLK		0x4e 0x004
+#define MX1_PAD_SPI1_SCLK__GPIO3_14		0x4e 0x032
+#define MX1_PAD_SPI1_SS__SPI1_SS		0x4f 0x000
+#define MX1_PAD_SPI1_SS__GPIO3_15		0x4f 0x032
+#define MX1_PAD_SPI1_MISO__SPI1_MISO		0x50 0x000
+#define MX1_PAD_SPI1_MISO__GPIO3_16		0x50 0x032
+#define MX1_PAD_SPI1_MOSI__SPI1_MOSI		0x51 0x004
+#define MX1_PAD_SPI1_MOSI__GPIO3_17		0x51 0x032
+#define MX1_PAD_BT13__BT13			0x53 0x004
+#define MX1_PAD_BT13__SSI2_RXCLK		0x53 0x001
+#define MX1_PAD_BT13__GPIO3_19			0x53 0x032
+#define MX1_PAD_BT12__BT12			0x54 0x004
+#define MX1_PAD_BT12__SSI2_TXFS			0x54 0x001
+#define MX1_PAD_BT12__GPIO3_20			0x54 0x032
+#define MX1_PAD_BT11__BT11			0x55 0x004
+#define MX1_PAD_BT11__SSI2_TXCLK		0x55 0x001
+#define MX1_PAD_BT11__GPIO3_21			0x55 0x032
+#define MX1_PAD_BT10__BT10			0x56 0x004
+#define MX1_PAD_BT10__SSI2_TX			0x56 0x001
+#define MX1_PAD_BT10__GPIO3_22			0x56 0x032
+#define MX1_PAD_BT9__BT9			0x57 0x004
+#define MX1_PAD_BT9__SSI2_RX			0x57 0x001
+#define MX1_PAD_BT9__GPIO3_23			0x57 0x032
+#define MX1_PAD_BT8__BT8			0x58 0x004
+#define MX1_PAD_BT8__SSI2_RXFS			0x58 0x001
+#define MX1_PAD_BT8__GPIO3_24			0x58 0x032
+#define MX1_PAD_BT8__UART3_RI			0x58 0x016
+#define MX1_PAD_BT7__BT7			0x59 0x004
+#define MX1_PAD_BT7__GPIO3_25			0x59 0x032
+#define MX1_PAD_BT7__UART3_DSR			0x59 0x016
+#define MX1_PAD_BT6__BT6			0x5a 0x004
+#define MX1_PAD_BT6__GPIO3_26			0x5a 0x032
+#define MX1_PAD_BT6__SPI2_SS3			0x5a 0x016
+#define MX1_PAD_BT6__UART3_DTR			0x5a 0x022
+#define MX1_PAD_BT5__BT5			0x5b 0x000
+#define MX1_PAD_BT5__GPIO3_27			0x5b 0x032
+#define MX1_PAD_BT5__UART3_DCD			0x5b 0x016
+#define MX1_PAD_BT4__BT4			0x5c 0x000
+#define MX1_PAD_BT4__GPIO3_28			0x5c 0x032
+#define MX1_PAD_BT4__UART3_CTS			0x5c 0x016
+#define MX1_PAD_BT3__BT3			0x5d 0x000
+#define MX1_PAD_BT3__GPIO3_29			0x5d 0x032
+#define MX1_PAD_BT3__UART3_RTS			0x5d 0x022
+#define MX1_PAD_BT2__BT2			0x5e 0x004
+#define MX1_PAD_BT2__GPIO3_30			0x5e 0x032
+#define MX1_PAD_BT2__UART3_TX			0x5e 0x016
+#define MX1_PAD_BT1__BT1			0x5f 0x000
+#define MX1_PAD_BT1__GPIO3_31			0x5f 0x032
+#define MX1_PAD_BT1__UART3_RX			0x5f 0x022
+#define MX1_PAD_LSCLK__LSCLK			0x66 0x004
+#define MX1_PAD_LSCLK__GPIO4_6			0x66 0x032
+#define MX1_PAD_REV__REV			0x67 0x004
+#define MX1_PAD_REV__UART2_DTR			0x67 0x001
+#define MX1_PAD_REV__GPIO4_7			0x67 0x032
+#define MX1_PAD_REV__SPI2_CLK			0x67 0x006
+#define MX1_PAD_CLS__CLS			0x68 0x004
+#define MX1_PAD_CLS__UART2_DCD			0x68 0x005
+#define MX1_PAD_CLS__GPIO4_8			0x68 0x032
+#define MX1_PAD_CLS__SPI2_SS			0x68 0x002
+#define MX1_PAD_PS__PS				0x69 0x004
+#define MX1_PAD_PS__UART2_RI			0x69 0x005
+#define MX1_PAD_PS__GPIO4_9			0x69 0x032
+#define MX1_PAD_PS__SPI2_RXD			0x69 0x022
+#define MX1_PAD_SPL_SPR__SPL_SPR		0x6a 0x004
+#define MX1_PAD_SPL_SPR__UART2_DSR		0x6a 0x005
+#define MX1_PAD_SPL_SPR__GPIO4_10		0x6a 0x032
+#define MX1_PAD_SPL_SPR__SPI2_TXD		0x6a 0x006
+#define MX1_PAD_CONTRAST__CONTRAST		0x6b 0x004
+#define MX1_PAD_CONTRAST__GPIO4_11		0x6b 0x032
+#define MX1_PAD_CONTRAST__SPI2_SS2		0x6b 0x012
+#define MX1_PAD_ACD_OE__ACD_OE			0x6c 0x004
+#define MX1_PAD_ACD_OE__GPIO4_12		0x6c 0x032
+#define MX1_PAD_LP_HSYNC__LP_HSYNC		0x6d 0x004
+#define MX1_PAD_LP_HSYNC__GPIO4_13		0x6d 0x032
+#define MX1_PAD_FLM_VSYNC__FLM_VSYNC		0x6e 0x004
+#define MX1_PAD_FLM_VSYNC__GPIO4_14		0x6e 0x032
+#define MX1_PAD_LD0__LD0			0x6f 0x004
+#define MX1_PAD_LD0__GPIO4_15			0x6f 0x032
+#define MX1_PAD_LD1__LD1			0x70 0x004
+#define MX1_PAD_LD1__GPIO4_16			0x70 0x032
+#define MX1_PAD_LD2__LD2			0x71 0x004
+#define MX1_PAD_LD2__GPIO4_17			0x71 0x032
+#define MX1_PAD_LD3__LD3			0x72 0x004
+#define MX1_PAD_LD3__GPIO4_18			0x72 0x032
+#define MX1_PAD_LD4__LD4			0x73 0x004
+#define MX1_PAD_LD4__GPIO4_19			0x73 0x032
+#define MX1_PAD_LD5__LD5			0x74 0x004
+#define MX1_PAD_LD5__GPIO4_20			0x74 0x032
+#define MX1_PAD_LD6__LD6			0x75 0x004
+#define MX1_PAD_LD6__GPIO4_21			0x75 0x032
+#define MX1_PAD_LD7__LD7			0x76 0x004
+#define MX1_PAD_LD7__GPIO4_22			0x76 0x032
+#define MX1_PAD_LD8__LD8			0x77 0x004
+#define MX1_PAD_LD8__GPIO4_23			0x77 0x032
+#define MX1_PAD_LD9__LD9			0x78 0x004
+#define MX1_PAD_LD9__GPIO4_24			0x78 0x032
+#define MX1_PAD_LD10__LD10			0x79 0x004
+#define MX1_PAD_LD10__GPIO4_25			0x79 0x032
+#define MX1_PAD_LD11__LD11			0x7a 0x004
+#define MX1_PAD_LD11__GPIO4_26			0x7a 0x032
+#define MX1_PAD_LD12__LD12			0x7b 0x004
+#define MX1_PAD_LD12__GPIO4_27			0x7b 0x032
+#define MX1_PAD_LD13__LD13			0x7c 0x004
+#define MX1_PAD_LD13__GPIO4_28			0x7c 0x032
+#define MX1_PAD_LD14__LD14			0x7d 0x004
+#define MX1_PAD_LD14__GPIO4_29			0x7d 0x032
+#define MX1_PAD_LD15__LD15			0x7e 0x004
+#define MX1_PAD_LD15__GPIO4_30			0x7e 0x032
+#define MX1_PAD_TMR2OUT__TMR2OUT		0x7f 0x000
+#define MX1_PAD_TMR2OUT__GPIO4_31		0x7f 0x032
+#define MX1_PAD_TMR2OUT__SPI2_TXD		0x7f 0x006
+
+#endif
diff --git a/src/arm/imx1.dtsi b/src/arm/imx1.dtsi
new file mode 100644
index 000000000000..22f5d1db5b31
--- /dev/null
+++ b/src/arm/imx1.dtsi
@@ -0,0 +1,266 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx1-pinfunc.h"
+
+#include <dt-bindings/clock/imx1-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &cspi1;
+		spi1 = &cspi2;
+	};
+
+	aitc: aitc-interrupt-controller@00223000 {
+		compatible = "fsl,imx1-aitc", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x00223000 0x1000>;
+	};
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm920t";
+			operating-points = <200000 1900000>;
+			clock-latency = <62500>;
+			clocks = <&clks IMX1_CLK_MCU>;
+			voltage-tolerance = <5>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&aitc>;
+		ranges;
+
+		aipi@00200000 {
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00200000 0x10000>;
+			ranges;
+
+			gpt1: timer@00202000 {
+				compatible = "fsl,imx1-gpt";
+				reg = <0x00202000 0x1000>;
+				interrupts = <59>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@00203000 {
+				compatible = "fsl,imx1-gpt";
+				reg = <0x00203000 0x1000>;
+				interrupts = <58>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+			};
+
+			fb: fb@00205000 {
+				compatible = "fsl,imx1-fb";
+				reg = <0x00205000 0x1000>;
+				interrupts = <14>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER2>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@00206000 {
+				compatible = "fsl,imx1-uart";
+				reg = <0x00206000 0x1000>;
+				interrupts = <30 29 26>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@00207000 {
+				compatible = "fsl,imx1-uart";
+				reg = <0x00207000 0x1000>;
+				interrupts = <24 23 20>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			pwm: pwm@00208000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx1-pwm";
+				reg = <0x00208000 0x1000>;
+				interrupts = <34>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+			};
+
+			dma: dma@00209000 {
+				compatible = "fsl,imx1-dma";
+				reg = <0x00209000 0x1000>;
+				interrupts = <61 60>;
+				clocks = <&clks IMX1_CLK_HCLK>,
+					 <&clks IMX1_CLK_DMA_GATE>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <1>;
+			};
+
+			uart3: serial@0020a000 {
+				compatible = "fsl,imx1-uart";
+				reg = <0x0020a000 0x1000>;
+				interrupts = <54 4 1>;
+				clocks = <&clks IMX1_CLK_UART3_GATE>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		aipi@00210000 {
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x00210000 0x10000>;
+			ranges;
+
+			cspi1: cspi@00213000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx1-cspi";
+				reg = <0x00213000 0x1000>;
+				interrupts = <41>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c: i2c@00217000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx1-i2c";
+				reg = <0x00217000 0x1000>;
+				interrupts = <39>;
+				clocks = <&clks IMX1_CLK_HCLK>;
+				status = "disabled";
+			};
+
+			cspi2: cspi@00219000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx1-cspi";
+				reg = <0x00219000 0x1000>;
+				interrupts = <40>;
+				clocks = <&clks IMX1_CLK_DUMMY>,
+					 <&clks IMX1_CLK_PER1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			clks: ccm@0021b000 {
+				compatible = "fsl,imx1-ccm";
+				reg = <0x0021b000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			iomuxc: iomuxc@0021c000 {
+				compatible = "fsl,imx1-iomuxc";
+				reg = <0x0021c000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				gpio1: gpio@0021c000 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c000 0x100>;
+					interrupts = <11>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@0021c100 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c100 0x100>;
+					interrupts = <12>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@0021c200 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c200 0x100>;
+					interrupts = <13>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@0021c300 {
+					compatible = "fsl,imx1-gpio";
+					reg = <0x0021c300 0x100>;
+					interrupts = <62>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+			};
+		};
+
+		weim: weim@00220000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "fsl,imx1-weim";
+			reg = <0x00220000 0x1000>;
+			clocks = <&clks IMX1_CLK_DUMMY>;
+			ranges = <
+				0 0 0x10000000 0x02000000
+				1 0 0x12000000 0x01000000
+				2 0 0x13000000 0x01000000
+				3 0 0x14000000 0x01000000
+				4 0 0x15000000 0x01000000
+				5 0 0x16000000 0x01000000
+			>;
+			status = "disabled";
+		};
+
+		esram: esram@00300000 {
+			compatible = "mmio-sram";
+			reg = <0x00300000 0x20000>;
+		};
+	};
+};
diff --git a/src/arm/imx23-evk.dts b/src/arm/imx23-evk.dts
new file mode 100644
index 000000000000..57e29977ba06
--- /dev/null
+++ b/src/arm/imx23-evk.dts
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Freescale i.MX23 Evaluation Kit";
+	compatible = "fsl,imx23-evk", "fsl,imx23";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
+				status = "okay";
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				wp-gpios = <&gpio1 30 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_RESET__GPIO_1_18
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a>;
+				lcd-supply = <&reg_lcd_3v3>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <9200000>;
+							hactive = <480>;
+							vactive = <272>;
+							hback-porch = <15>;
+							hfront-porch = <8>;
+							vback-porch = <12>;
+							vfront-porch = <4>;
+							hsync-len = <1>;
+							vsync-len = <1>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_vddio_sd0: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 29 0>;
+		};
+
+		reg_lcd_3v3: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 18 0>;
+			enable-active-high;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/src/arm/imx23-olinuxino.dts b/src/arm/imx23-olinuxino.dts
new file mode 100644
index 000000000000..7e6eef2488e8
--- /dev/null
+++ b/src/arm/imx23-olinuxino.dts
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "i.MX23 Olinuxino Low Cost Board";
+	compatible = "olimex,imx23-olinuxino", "fsl,imx23";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				broken-cd;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_ALE__GPIO_0_17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pin_gpio2_1: led_gpio2_1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DETECT__GPIO_2_1
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			ssp1: ssp@80034000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */
+			gpio = <&gpio0 17 0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio2_1>;
+
+		user {
+			label = "green";
+			gpios = <&gpio2 1 1>;
+		};
+	};
+};
diff --git a/src/arm/imx23-pinfunc.h b/src/arm/imx23-pinfunc.h
new file mode 100644
index 000000000000..5c0f32ca3a93
--- /dev/null
+++ b/src/arm/imx23-pinfunc.h
@@ -0,0 +1,333 @@
+/*
+ * Header providing constants for i.MX23 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX23_PINCTRL_H__
+#define __DT_BINDINGS_MX23_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX23_PAD_GPMI_D00__GPMI_D00			0x0000
+#define MX23_PAD_GPMI_D01__GPMI_D01			0x0010
+#define MX23_PAD_GPMI_D02__GPMI_D02			0x0020
+#define MX23_PAD_GPMI_D03__GPMI_D03			0x0030
+#define MX23_PAD_GPMI_D04__GPMI_D04			0x0040
+#define MX23_PAD_GPMI_D05__GPMI_D05			0x0050
+#define MX23_PAD_GPMI_D06__GPMI_D06			0x0060
+#define MX23_PAD_GPMI_D07__GPMI_D07			0x0070
+#define MX23_PAD_GPMI_D08__GPMI_D08			0x0080
+#define MX23_PAD_GPMI_D09__GPMI_D09			0x0090
+#define MX23_PAD_GPMI_D10__GPMI_D10			0x00a0
+#define MX23_PAD_GPMI_D11__GPMI_D11			0x00b0
+#define MX23_PAD_GPMI_D12__GPMI_D12			0x00c0
+#define MX23_PAD_GPMI_D13__GPMI_D13			0x00d0
+#define MX23_PAD_GPMI_D14__GPMI_D14			0x00e0
+#define MX23_PAD_GPMI_D15__GPMI_D15			0x00f0
+#define MX23_PAD_GPMI_CLE__GPMI_CLE			0x0100
+#define MX23_PAD_GPMI_ALE__GPMI_ALE			0x0110
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0			0x0130
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1			0x0140
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2			0x0150
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3			0x0160
+#define MX23_PAD_GPMI_WPN__GPMI_WPN			0x0170
+#define MX23_PAD_GPMI_WRN__GPMI_WRN			0x0180
+#define MX23_PAD_GPMI_RDN__GPMI_RDN			0x0190
+#define MX23_PAD_AUART1_CTS__AUART1_CTS			0x01a0
+#define MX23_PAD_AUART1_RTS__AUART1_RTS			0x01b0
+#define MX23_PAD_AUART1_RX__AUART1_RX			0x01c0
+#define MX23_PAD_AUART1_TX__AUART1_TX			0x01d0
+#define MX23_PAD_I2C_SCL__I2C_SCL			0x01e0
+#define MX23_PAD_I2C_SDA__I2C_SDA			0x01f0
+#define MX23_PAD_LCD_D00__LCD_D00			0x1000
+#define MX23_PAD_LCD_D01__LCD_D01			0x1010
+#define MX23_PAD_LCD_D02__LCD_D02			0x1020
+#define MX23_PAD_LCD_D03__LCD_D03			0x1030
+#define MX23_PAD_LCD_D04__LCD_D04			0x1040
+#define MX23_PAD_LCD_D05__LCD_D05			0x1050
+#define MX23_PAD_LCD_D06__LCD_D06			0x1060
+#define MX23_PAD_LCD_D07__LCD_D07			0x1070
+#define MX23_PAD_LCD_D08__LCD_D08			0x1080
+#define MX23_PAD_LCD_D09__LCD_D09			0x1090
+#define MX23_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX23_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX23_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX23_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX23_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX23_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX23_PAD_LCD_D16__LCD_D16			0x1100
+#define MX23_PAD_LCD_D17__LCD_D17			0x1110
+#define MX23_PAD_LCD_RESET__LCD_RESET			0x1120
+#define MX23_PAD_LCD_RS__LCD_RS				0x1130
+#define MX23_PAD_LCD_WR__LCD_WR				0x1140
+#define MX23_PAD_LCD_CS__LCD_CS				0x1150
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK			0x1160
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE			0x1170
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC			0x1180
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC			0x1190
+#define MX23_PAD_PWM0__PWM0				0x11a0
+#define MX23_PAD_PWM1__PWM1				0x11b0
+#define MX23_PAD_PWM2__PWM2				0x11c0
+#define MX23_PAD_PWM3__PWM3				0x11d0
+#define MX23_PAD_PWM4__PWM4				0x11e0
+#define MX23_PAD_SSP1_CMD__SSP1_CMD			0x2000
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT		0x2010
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0			0x2020
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1			0x2030
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2			0x2040
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3			0x2050
+#define MX23_PAD_SSP1_SCK__SSP1_SCK			0x2060
+#define MX23_PAD_ROTARYA__ROTARYA			0x2070
+#define MX23_PAD_ROTARYB__ROTARYB			0x2080
+#define MX23_PAD_EMI_A00__EMI_A00			0x2090
+#define MX23_PAD_EMI_A01__EMI_A01			0x20a0
+#define MX23_PAD_EMI_A02__EMI_A02			0x20b0
+#define MX23_PAD_EMI_A03__EMI_A03			0x20c0
+#define MX23_PAD_EMI_A04__EMI_A04			0x20d0
+#define MX23_PAD_EMI_A05__EMI_A05			0x20e0
+#define MX23_PAD_EMI_A06__EMI_A06			0x20f0
+#define MX23_PAD_EMI_A07__EMI_A07			0x2100
+#define MX23_PAD_EMI_A08__EMI_A08			0x2110
+#define MX23_PAD_EMI_A09__EMI_A09			0x2120
+#define MX23_PAD_EMI_A10__EMI_A10			0x2130
+#define MX23_PAD_EMI_A11__EMI_A11			0x2140
+#define MX23_PAD_EMI_A12__EMI_A12			0x2150
+#define MX23_PAD_EMI_BA0__EMI_BA0			0x2160
+#define MX23_PAD_EMI_BA1__EMI_BA1			0x2170
+#define MX23_PAD_EMI_CASN__EMI_CASN			0x2180
+#define MX23_PAD_EMI_CE0N__EMI_CE0N			0x2190
+#define MX23_PAD_EMI_CE1N__EMI_CE1N			0x21a0
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N			0x21b0
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N			0x21c0
+#define MX23_PAD_EMI_CKE__EMI_CKE			0x21d0
+#define MX23_PAD_EMI_RASN__EMI_RASN			0x21e0
+#define MX23_PAD_EMI_WEN__EMI_WEN			0x21f0
+#define MX23_PAD_EMI_D00__EMI_D00			0x3000
+#define MX23_PAD_EMI_D01__EMI_D01			0x3010
+#define MX23_PAD_EMI_D02__EMI_D02			0x3020
+#define MX23_PAD_EMI_D03__EMI_D03			0x3030
+#define MX23_PAD_EMI_D04__EMI_D04			0x3040
+#define MX23_PAD_EMI_D05__EMI_D05			0x3050
+#define MX23_PAD_EMI_D06__EMI_D06			0x3060
+#define MX23_PAD_EMI_D07__EMI_D07			0x3070
+#define MX23_PAD_EMI_D08__EMI_D08			0x3080
+#define MX23_PAD_EMI_D09__EMI_D09			0x3090
+#define MX23_PAD_EMI_D10__EMI_D10			0x30a0
+#define MX23_PAD_EMI_D11__EMI_D11			0x30b0
+#define MX23_PAD_EMI_D12__EMI_D12			0x30c0
+#define MX23_PAD_EMI_D13__EMI_D13			0x30d0
+#define MX23_PAD_EMI_D14__EMI_D14			0x30e0
+#define MX23_PAD_EMI_D15__EMI_D15			0x30f0
+#define MX23_PAD_EMI_DQM0__EMI_DQM0			0x3100
+#define MX23_PAD_EMI_DQM1__EMI_DQM1			0x3110
+#define MX23_PAD_EMI_DQS0__EMI_DQS0			0x3120
+#define MX23_PAD_EMI_DQS1__EMI_DQS1			0x3130
+#define MX23_PAD_EMI_CLK__EMI_CLK			0x3140
+#define MX23_PAD_EMI_CLKN__EMI_CLKN			0x3150
+#define MX23_PAD_GPMI_D00__LCD_D8			0x0001
+#define MX23_PAD_GPMI_D01__LCD_D9			0x0011
+#define MX23_PAD_GPMI_D02__LCD_D10			0x0021
+#define MX23_PAD_GPMI_D03__LCD_D11			0x0031
+#define MX23_PAD_GPMI_D04__LCD_D12			0x0041
+#define MX23_PAD_GPMI_D05__LCD_D13			0x0051
+#define MX23_PAD_GPMI_D06__LCD_D14			0x0061
+#define MX23_PAD_GPMI_D07__LCD_D15			0x0071
+#define MX23_PAD_GPMI_D08__LCD_D18			0x0081
+#define MX23_PAD_GPMI_D09__LCD_D19			0x0091
+#define MX23_PAD_GPMI_D10__LCD_D20			0x00a1
+#define MX23_PAD_GPMI_D11__LCD_D21			0x00b1
+#define MX23_PAD_GPMI_D12__LCD_D22			0x00c1
+#define MX23_PAD_GPMI_D13__LCD_D23			0x00d1
+#define MX23_PAD_GPMI_D14__AUART2_RX			0x00e1
+#define MX23_PAD_GPMI_D15__AUART2_TX			0x00f1
+#define MX23_PAD_GPMI_CLE__LCD_D16			0x0101
+#define MX23_PAD_GPMI_ALE__LCD_D17			0x0111
+#define MX23_PAD_GPMI_CE2N__ATA_A2			0x0121
+#define MX23_PAD_AUART1_RTS__IR_CLK			0x01b1
+#define MX23_PAD_AUART1_RX__IR_RX			0x01c1
+#define MX23_PAD_AUART1_TX__IR_TX			0x01d1
+#define MX23_PAD_I2C_SCL__GPMI_RDY2			0x01e1
+#define MX23_PAD_I2C_SDA__GPMI_CE2N			0x01f1
+#define MX23_PAD_LCD_D00__ETM_DA8			0x1001
+#define MX23_PAD_LCD_D01__ETM_DA9			0x1011
+#define MX23_PAD_LCD_D02__ETM_DA10			0x1021
+#define MX23_PAD_LCD_D03__ETM_DA11			0x1031
+#define MX23_PAD_LCD_D04__ETM_DA12			0x1041
+#define MX23_PAD_LCD_D05__ETM_DA13			0x1051
+#define MX23_PAD_LCD_D06__ETM_DA14			0x1061
+#define MX23_PAD_LCD_D07__ETM_DA15			0x1071
+#define MX23_PAD_LCD_D08__ETM_DA0			0x1081
+#define MX23_PAD_LCD_D09__ETM_DA1			0x1091
+#define MX23_PAD_LCD_D10__ETM_DA2			0x10a1
+#define MX23_PAD_LCD_D11__ETM_DA3			0x10b1
+#define MX23_PAD_LCD_D12__ETM_DA4			0x10c1
+#define MX23_PAD_LCD_D13__ETM_DA5			0x10d1
+#define MX23_PAD_LCD_D14__ETM_DA6			0x10e1
+#define MX23_PAD_LCD_D15__ETM_DA7			0x10f1
+#define MX23_PAD_LCD_RESET__ETM_TCTL			0x1121
+#define MX23_PAD_LCD_RS__ETM_TCLK			0x1131
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3			0x1161
+#define MX23_PAD_LCD_ENABLE__I2C_SCL			0x1171
+#define MX23_PAD_LCD_HSYNC__I2C_SDA			0x1181
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY			0x1191
+#define MX23_PAD_PWM0__ROTARYA				0x11a1
+#define MX23_PAD_PWM1__ROTARYB				0x11b1
+#define MX23_PAD_PWM2__GPMI_RDY3			0x11c1
+#define MX23_PAD_PWM3__ETM_TCTL				0x11d1
+#define MX23_PAD_PWM4__ETM_TCLK				0x11e1
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N			0x2011
+#define MX23_PAD_SSP1_DATA1__I2C_SCL			0x2031
+#define MX23_PAD_SSP1_DATA2__I2C_SDA			0x2041
+#define MX23_PAD_ROTARYA__AUART2_RTS			0x2071
+#define MX23_PAD_ROTARYB__AUART2_CTS			0x2081
+#define MX23_PAD_GPMI_D00__SSP2_DATA0			0x0002
+#define MX23_PAD_GPMI_D01__SSP2_DATA1			0x0012
+#define MX23_PAD_GPMI_D02__SSP2_DATA2			0x0022
+#define MX23_PAD_GPMI_D03__SSP2_DATA3			0x0032
+#define MX23_PAD_GPMI_D04__SSP2_DATA4			0x0042
+#define MX23_PAD_GPMI_D05__SSP2_DATA5			0x0052
+#define MX23_PAD_GPMI_D06__SSP2_DATA6			0x0062
+#define MX23_PAD_GPMI_D07__SSP2_DATA7			0x0072
+#define MX23_PAD_GPMI_D08__SSP1_DATA4			0x0082
+#define MX23_PAD_GPMI_D09__SSP1_DATA5			0x0092
+#define MX23_PAD_GPMI_D10__SSP1_DATA6			0x00a2
+#define MX23_PAD_GPMI_D11__SSP1_DATA7			0x00b2
+#define MX23_PAD_GPMI_D15__GPMI_CE3N			0x00f2
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT			0x0132
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD			0x0142
+#define MX23_PAD_GPMI_WRN__SSP2_SCK			0x0182
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4			0x01a2
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5			0x01b2
+#define MX23_PAD_AUART1_RX__SSP1_DATA6			0x01c2
+#define MX23_PAD_AUART1_TX__SSP1_DATA7			0x01d2
+#define MX23_PAD_I2C_SCL__AUART1_TX			0x01e2
+#define MX23_PAD_I2C_SDA__AUART1_RX			0x01f2
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0			0x1082
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0			0x1092
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK		0x10a2
+#define MX23_PAD_LCD_D11__SAIF_LRCLK			0x10b2
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1			0x10c2
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2			0x10d2
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2			0x10e2
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1			0x10f2
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK		0x1102
+#define MX23_PAD_LCD_RESET__GPMI_CE3N			0x1122
+#define MX23_PAD_PWM0__DUART_RX				0x11a2
+#define MX23_PAD_PWM1__DUART_TX				0x11b2
+#define MX23_PAD_PWM3__AUART1_CTS			0x11d2
+#define MX23_PAD_PWM4__AUART1_RTS			0x11e2
+#define MX23_PAD_SSP1_CMD__JTAG_TDO			0x2002
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID		0x2012
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI			0x2022
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK			0x2032
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK			0x2042
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS			0x2052
+#define MX23_PAD_SSP1_SCK__JTAG_TRST			0x2062
+#define MX23_PAD_ROTARYA__SPDIF				0x2072
+#define MX23_PAD_ROTARYB__GPMI_CE3N			0x2082
+#define MX23_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX23_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX23_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX23_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX23_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX23_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX23_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX23_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX23_PAD_GPMI_D08__GPIO_0_8			0x0083
+#define MX23_PAD_GPMI_D09__GPIO_0_9			0x0093
+#define MX23_PAD_GPMI_D10__GPIO_0_10			0x00a3
+#define MX23_PAD_GPMI_D11__GPIO_0_11			0x00b3
+#define MX23_PAD_GPMI_D12__GPIO_0_12			0x00c3
+#define MX23_PAD_GPMI_D13__GPIO_0_13			0x00d3
+#define MX23_PAD_GPMI_D14__GPIO_0_14			0x00e3
+#define MX23_PAD_GPMI_D15__GPIO_0_15			0x00f3
+#define MX23_PAD_GPMI_CLE__GPIO_0_16			0x0103
+#define MX23_PAD_GPMI_ALE__GPIO_0_17			0x0113
+#define MX23_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX23_PAD_GPMI_RDY0__GPIO_0_19			0x0133
+#define MX23_PAD_GPMI_RDY1__GPIO_0_20			0x0143
+#define MX23_PAD_GPMI_RDY2__GPIO_0_21			0x0153
+#define MX23_PAD_GPMI_RDY3__GPIO_0_22			0x0163
+#define MX23_PAD_GPMI_WPN__GPIO_0_23			0x0173
+#define MX23_PAD_GPMI_WRN__GPIO_0_24			0x0183
+#define MX23_PAD_GPMI_RDN__GPIO_0_25			0x0193
+#define MX23_PAD_AUART1_CTS__GPIO_0_26			0x01a3
+#define MX23_PAD_AUART1_RTS__GPIO_0_27			0x01b3
+#define MX23_PAD_AUART1_RX__GPIO_0_28			0x01c3
+#define MX23_PAD_AUART1_TX__GPIO_0_29			0x01d3
+#define MX23_PAD_I2C_SCL__GPIO_0_30			0x01e3
+#define MX23_PAD_I2C_SDA__GPIO_0_31			0x01f3
+#define MX23_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX23_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX23_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX23_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX23_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX23_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX23_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX23_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX23_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX23_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX23_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX23_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX23_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX23_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX23_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX23_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX23_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX23_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX23_PAD_LCD_RESET__GPIO_1_18			0x1123
+#define MX23_PAD_LCD_RS__GPIO_1_19			0x1133
+#define MX23_PAD_LCD_WR__GPIO_1_20			0x1143
+#define MX23_PAD_LCD_CS__GPIO_1_21			0x1153
+#define MX23_PAD_LCD_DOTCK__GPIO_1_22			0x1163
+#define MX23_PAD_LCD_ENABLE__GPIO_1_23			0x1173
+#define MX23_PAD_LCD_HSYNC__GPIO_1_24			0x1183
+#define MX23_PAD_LCD_VSYNC__GPIO_1_25			0x1193
+#define MX23_PAD_PWM0__GPIO_1_26			0x11a3
+#define MX23_PAD_PWM1__GPIO_1_27			0x11b3
+#define MX23_PAD_PWM2__GPIO_1_28			0x11c3
+#define MX23_PAD_PWM3__GPIO_1_29			0x11d3
+#define MX23_PAD_PWM4__GPIO_1_30			0x11e3
+#define MX23_PAD_SSP1_CMD__GPIO_2_0			0x2003
+#define MX23_PAD_SSP1_DETECT__GPIO_2_1			0x2013
+#define MX23_PAD_SSP1_DATA0__GPIO_2_2			0x2023
+#define MX23_PAD_SSP1_DATA1__GPIO_2_3			0x2033
+#define MX23_PAD_SSP1_DATA2__GPIO_2_4			0x2043
+#define MX23_PAD_SSP1_DATA3__GPIO_2_5			0x2053
+#define MX23_PAD_SSP1_SCK__GPIO_2_6			0x2063
+#define MX23_PAD_ROTARYA__GPIO_2_7			0x2073
+#define MX23_PAD_ROTARYB__GPIO_2_8			0x2083
+#define MX23_PAD_EMI_A00__GPIO_2_9			0x2093
+#define MX23_PAD_EMI_A01__GPIO_2_10			0x20a3
+#define MX23_PAD_EMI_A02__GPIO_2_11			0x20b3
+#define MX23_PAD_EMI_A03__GPIO_2_12			0x20c3
+#define MX23_PAD_EMI_A04__GPIO_2_13			0x20d3
+#define MX23_PAD_EMI_A05__GPIO_2_14			0x20e3
+#define MX23_PAD_EMI_A06__GPIO_2_15			0x20f3
+#define MX23_PAD_EMI_A07__GPIO_2_16			0x2103
+#define MX23_PAD_EMI_A08__GPIO_2_17			0x2113
+#define MX23_PAD_EMI_A09__GPIO_2_18			0x2123
+#define MX23_PAD_EMI_A10__GPIO_2_19			0x2133
+#define MX23_PAD_EMI_A11__GPIO_2_20			0x2143
+#define MX23_PAD_EMI_A12__GPIO_2_21			0x2153
+#define MX23_PAD_EMI_BA0__GPIO_2_22			0x2163
+#define MX23_PAD_EMI_BA1__GPIO_2_23			0x2173
+#define MX23_PAD_EMI_CASN__GPIO_2_24			0x2183
+#define MX23_PAD_EMI_CE0N__GPIO_2_25			0x2193
+#define MX23_PAD_EMI_CE1N__GPIO_2_26			0x21a3
+#define MX23_PAD_GPMI_CE1N__GPIO_2_27			0x21b3
+#define MX23_PAD_GPMI_CE0N__GPIO_2_28			0x21c3
+#define MX23_PAD_EMI_CKE__GPIO_2_29			0x21d3
+#define MX23_PAD_EMI_RASN__GPIO_2_30			0x21e3
+#define MX23_PAD_EMI_WEN__GPIO_2_31			0x21f3
+
+#endif /* __DT_BINDINGS_MX23_PINCTRL_H__ */
diff --git a/src/arm/imx23-stmp378x_devb.dts b/src/arm/imx23-stmp378x_devb.dts
new file mode 100644
index 000000000000..455169e99d49
--- /dev/null
+++ b/src/arm/imx23-stmp378x_devb.dts
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Freescale STMP378x Development Board";
+	compatible = "fsl,stmp378x-devb", "fsl,imx23";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				wp-gpios = <&gpio1 30 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_PWM4__GPIO_1_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_vddio_sd0: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 29 0>;
+		};
+	};
+};
diff --git a/src/arm/imx23.dtsi b/src/arm/imx23.dtsi
new file mode 100644
index 000000000000..bbcfb5a19c77
--- /dev/null
+++ b/src/arm/imx23.dtsi
@@ -0,0 +1,535 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx23-pinfunc.h"
+
+/ {
+	interrupt-parent = <&icoll>;
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		serial0 = &auart0;
+		serial1 = &auart1;
+		spi0 = &ssp0;
+		spi1 = &ssp1;
+		usbphy0 = &usbphy0;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x40000>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx23-icoll", "fsl,icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			dma_apbh: dma-apbh@80004000 {
+				compatible = "fsl,imx23-dma-apbh";
+				reg = <0x80004000 0x2000>;
+				interrupts = <0 14 20 0
+					      13 13 13 13>;
+				interrupt-names = "empty", "ssp0", "ssp1", "empty",
+						  "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+				#dma-cells = <1>;
+				dma-channels = <8>;
+				clocks = <&clks 15>;
+			};
+
+			ecc@80008000 {
+				reg = <0x80008000 0x2000>;
+				status = "disabled";
+			};
+
+			gpmi-nand@8000c000 {
+				compatible = "fsl,imx23-gpmi-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+				reg-names = "gpmi-nand", "bch";
+				interrupts = <56>;
+				interrupt-names = "bch";
+				clocks = <&clks 34>;
+				clock-names = "gpmi_io";
+				dmas = <&dma_apbh 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp0: ssp@80010000 {
+				reg = <0x80010000 0x2000>;
+				interrupts = <15>;
+				clocks = <&clks 33>;
+				dmas = <&dma_apbh 1>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			etm@80014000 {
+				reg = <0x80014000 0x2000>;
+				status = "disabled";
+			};
+
+			pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-pinctrl", "simple-bus";
+				reg = <0x80018000 0x2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					interrupts = <16>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					interrupts = <17>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					interrupts = <18>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_PWM0__DUART_RX
+						MX23_PAD_PWM1__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_pins_a: auart0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_AUART1_RX__AUART1_RX
+						MX23_PAD_AUART1_TX__AUART1_TX
+						MX23_PAD_AUART1_CTS__AUART1_CTS
+						MX23_PAD_AUART1_RTS__AUART1_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_I2C_SCL__AUART1_TX
+						MX23_PAD_I2C_SDA__AUART1_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_a: gpmi-nand@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__GPMI_D00
+						MX23_PAD_GPMI_D01__GPMI_D01
+						MX23_PAD_GPMI_D02__GPMI_D02
+						MX23_PAD_GPMI_D03__GPMI_D03
+						MX23_PAD_GPMI_D04__GPMI_D04
+						MX23_PAD_GPMI_D05__GPMI_D05
+						MX23_PAD_GPMI_D06__GPMI_D06
+						MX23_PAD_GPMI_D07__GPMI_D07
+						MX23_PAD_GPMI_CLE__GPMI_CLE
+						MX23_PAD_GPMI_ALE__GPMI_ALE
+						MX23_PAD_GPMI_RDY0__GPMI_RDY0
+						MX23_PAD_GPMI_RDY1__GPMI_RDY1
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+						MX23_PAD_GPMI_CE1N__GPMI_CE1N
+						MX23_PAD_GPMI_CE0N__GPMI_CE0N
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_fixup: gpmi-pins-fixup {
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_WPN__GPMI_WPN
+						MX23_PAD_GPMI_WRN__GPMI_WRN
+						MX23_PAD_GPMI_RDN__GPMI_RDN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+				};
+
+				mmc0_4bit_pins_a: mmc0-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA0__SSP1_DATA0
+						MX23_PAD_SSP1_DATA1__SSP1_DATA1
+						MX23_PAD_SSP1_DATA2__SSP1_DATA2
+						MX23_PAD_SSP1_DATA3__SSP1_DATA3
+						MX23_PAD_GPMI_D08__SSP1_DATA4
+						MX23_PAD_GPMI_D09__SSP1_DATA5
+						MX23_PAD_GPMI_D10__SSP1_DATA6
+						MX23_PAD_GPMI_D11__SSP1_DATA7
+						MX23_PAD_SSP1_CMD__SSP1_CMD
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_pins_fixup: mmc0-pins-fixup {
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DETECT__SSP1_DETECT
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm2_pins_a: pwm2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_PWM2__PWM2
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_24bit_pins_a: lcdif-24bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_D00__LCD_D00
+						MX23_PAD_LCD_D01__LCD_D01
+						MX23_PAD_LCD_D02__LCD_D02
+						MX23_PAD_LCD_D03__LCD_D03
+						MX23_PAD_LCD_D04__LCD_D04
+						MX23_PAD_LCD_D05__LCD_D05
+						MX23_PAD_LCD_D06__LCD_D06
+						MX23_PAD_LCD_D07__LCD_D07
+						MX23_PAD_LCD_D08__LCD_D08
+						MX23_PAD_LCD_D09__LCD_D09
+						MX23_PAD_LCD_D10__LCD_D10
+						MX23_PAD_LCD_D11__LCD_D11
+						MX23_PAD_LCD_D12__LCD_D12
+						MX23_PAD_LCD_D13__LCD_D13
+						MX23_PAD_LCD_D14__LCD_D14
+						MX23_PAD_LCD_D15__LCD_D15
+						MX23_PAD_LCD_D16__LCD_D16
+						MX23_PAD_LCD_D17__LCD_D17
+						MX23_PAD_GPMI_D08__LCD_D18
+						MX23_PAD_GPMI_D09__LCD_D19
+						MX23_PAD_GPMI_D10__LCD_D20
+						MX23_PAD_GPMI_D11__LCD_D21
+						MX23_PAD_GPMI_D12__LCD_D22
+						MX23_PAD_GPMI_D13__LCD_D23
+						MX23_PAD_LCD_DOTCK__LCD_DOTCK
+						MX23_PAD_LCD_ENABLE__LCD_ENABLE
+						MX23_PAD_LCD_HSYNC__LCD_HSYNC
+						MX23_PAD_LCD_VSYNC__LCD_VSYNC
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+			};
+
+			digctl@8001c000 {
+				compatible = "fsl,imx23-digctl";
+				reg = <0x8001c000 2000>;
+				status = "disabled";
+			};
+
+			emi@80020000 {
+				reg = <0x80020000 0x2000>;
+				status = "disabled";
+			};
+
+			dma_apbx: dma-apbx@80024000 {
+				compatible = "fsl,imx23-dma-apbx";
+				reg = <0x80024000 0x2000>;
+				interrupts = <7 5 9 26
+					      19 0 25 23
+					      60 58 9 0
+					      0 0 0 0>;
+				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
+						  "saif0", "empty", "auart0-rx", "auart0-tx",
+						  "auart1-rx", "auart1-tx", "saif1", "empty",
+						  "empty", "empty", "empty", "empty";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 16>;
+			};
+
+			dcp@80028000 {
+				compatible = "fsl,imx23-dcp";
+				reg = <0x80028000 0x2000>;
+				interrupts = <53 54>;
+				status = "okay";
+			};
+
+			pxp@8002a000 {
+				reg = <0x8002a000 0x2000>;
+				status = "disabled";
+			};
+
+			ocotp@8002c000 {
+				compatible = "fsl,ocotp";
+				reg = <0x8002c000 0x2000>;
+				status = "disabled";
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 0x2000>;
+				status = "disabled";
+			};
+
+			lcdif@80030000 {
+				compatible = "fsl,imx23-lcdif";
+				reg = <0x80030000 2000>;
+				interrupts = <46 45>;
+				clocks = <&clks 38>;
+				status = "disabled";
+			};
+
+			ssp1: ssp@80034000 {
+				reg = <0x80034000 0x2000>;
+				interrupts = <2>;
+				clocks = <&clks 33>;
+				dmas = <&dma_apbh 2>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			tvenc@80038000 {
+				reg = <0x80038000 0x2000>;
+				status = "disabled";
+			};
+                };
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
+				reg = <0x80040000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			saif0: saif@80042000 {
+				reg = <0x80042000 0x2000>;
+				dmas = <&dma_apbx 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			power@80044000 {
+				reg = <0x80044000 0x2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				reg = <0x80046000 0x2000>;
+				dmas = <&dma_apbx 10>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			audio-out@80048000 {
+				reg = <0x80048000 0x2000>;
+				dmas = <&dma_apbx 1>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			audio-in@8004c000 {
+				reg = <0x8004c000 0x2000>;
+				dmas = <&dma_apbx 0>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			lradc: lradc@80050000 {
+				compatible = "fsl,imx23-lradc";
+				reg = <0x80050000 0x2000>;
+				interrupts = <36 37 38 39 40 41 42 43 44>;
+				status = "disabled";
+				clocks = <&clks 26>;
+			};
+
+			spdif@80054000 {
+				reg = <0x80054000 2000>;
+				dmas = <&dma_apbx 2>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			i2c@80058000 {
+				reg = <0x80058000 0x2000>;
+				dmas = <&dma_apbx 3>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			rtc@8005c000 {
+				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
+				reg = <0x8005c000 0x2000>;
+				interrupts = <22>;
+			};
+
+			pwm: pwm@80064000 {
+				compatible = "fsl,imx23-pwm";
+				reg = <0x80064000 0x2000>;
+				clocks = <&clks 30>;
+				#pwm-cells = <2>;
+				fsl,pwm-number = <5>;
+				status = "disabled";
+			};
+
+			timrot@80068000 {
+				compatible = "fsl,imx23-timrot", "fsl,timrot";
+				reg = <0x80068000 0x2000>;
+				interrupts = <28 29 30 31>;
+				clocks = <&clks 28>;
+			};
+
+			auart0: serial@8006c000 {
+				compatible = "fsl,imx23-auart";
+				reg = <0x8006c000 0x2000>;
+				interrupts = <24>;
+				clocks = <&clks 32>;
+				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			auart1: serial@8006e000 {
+				compatible = "fsl,imx23-auart";
+				reg = <0x8006e000 0x2000>;
+				interrupts = <59>;
+				clocks = <&clks 32>;
+				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			duart: serial@80070000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80070000 0x2000>;
+				interrupts = <0>;
+				clocks = <&clks 32>, <&clks 16>;
+				clock-names = "uart", "apb_pclk";
+				status = "disabled";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx23-usbphy";
+				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 41>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usb0: usb@80080000 {
+			compatible = "fsl,imx23-usb", "fsl,imx27-usb";
+			reg = <0x80080000 0x40000>;
+			interrupts = <11>;
+			fsl,usbphy = <&usbphy0>;
+			clocks = <&clks 40>;
+			status = "disabled";
+		};
+	};
+
+	iio_hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&lradc 8>;
+	};
+};
diff --git a/src/arm/imx25-eukrea-cpuimx25.dtsi b/src/arm/imx25-eukrea-cpuimx25.dtsi
new file mode 100644
index 000000000000..d6f27641c0ef
--- /dev/null
+++ b/src/arm/imx25-eukrea-cpuimx25.dtsi
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX25";
+	compatible = "eukrea,cpuimx25", "fsl,imx25";
+
+	memory {
+		reg = <0x80000000 0x4000000>; /* 64M */
+	};
+};
+
+&fec {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-cpuimx25 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
+				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
+				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
+				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
+				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
+				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
+				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
new file mode 100644
index 000000000000..68d0834a2d1e
--- /dev/null
+++ b/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	cmo_qvga: display {
+		model = "CMO-QVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xcad08b80>;
+		bus-width = <18>;
+		native-mode = <&qvga_timings>;
+		display-timings {
+			qvga_timings: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <30>;
+				hfront-porch = <38>;
+				vback-porch = <20>;
+				vfront-porch = <3>;
+				hsync-len = <15>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_lcd_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
+		};
+	};
+};
+
+&lcdc {
+	display = <&cmo_qvga>;
+	fsl,lpccr = <0x00a903ff>;
+	lcd-supply = <&reg_lcd_3v3>;
+	status = "okay";
+};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
new file mode 100644
index 000000000000..8eee2f65fe00
--- /dev/null
+++ b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_svga: display {
+		model = "DVI-SVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		native-mode = <&dvi_svga_timings>;
+		display-timings {
+			dvi_svga_timings: 800x600 {
+				clock-frequency = <40000000>;
+				hactive = <800>;
+				vactive = <600>;
+				hback-porch = <75>;
+				hfront-porch = <75>;
+				vback-porch = <7>;
+				vfront-porch = <75>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_svga>;
+	status = "okay";
+};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
new file mode 100644
index 000000000000..447da6263169
--- /dev/null
+++ b/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_vga: display {
+		model = "DVI-VGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		native-mode = <&dvi_vga_timings>;
+		display-timings {
+			dvi_vga_timings: 640x480 {
+				clock-frequency = <31250000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <100>;
+				hfront-porch = <100>;
+				vback-porch = <7>;
+				vfront-porch = <100>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_vga>;
+	status = "okay";
+};
diff --git a/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts b/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
new file mode 100644
index 000000000000..ed1d0b4578ef
--- /dev/null
+++ b/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -0,0 +1,186 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx25-eukrea-cpuimx25.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD25";
+	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		bp1 {
+			label = "BP1";
+			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx25-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <5>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 20>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX25_PAD_KPP_COL3__AUD5_TXFS		0xe0
+				MX25_PAD_KPP_COL2__AUD5_TXC		0xe0
+				MX25_PAD_KPP_COL1__AUD5_RXD		0xe0
+				MX25_PAD_KPP_COL0__AUD5_TXD		0xe0
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX25_PAD_SD1_CMD__SD1_CMD		0x400000c0
+				MX25_PAD_SD1_CLK__SD1_CLK		0x400000c0
+				MX25_PAD_SD1_DATA0__SD1_DATA0		0x400000c0
+				MX25_PAD_SD1_DATA1__SD1_DATA1		0x400000c0
+				MX25_PAD_SD1_DATA2__SD1_DATA2		0x400000c0
+				MX25_PAD_SD1_DATA3__SD1_DATA3		0x400000c0
+			>;
+		};
+
+		pinctrl_gpiokeys: gpiokeysgrp {
+			fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
+		};
+
+		pinctrl_gpioled: gpioledgrp {
+			fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
+		};
+
+		pinctrl_lcdc: lcdcgrp {
+			fsl,pins = <
+				MX25_PAD_LD0__LD0			0x1
+				MX25_PAD_LD1__LD1			0x1
+				MX25_PAD_LD2__LD2			0x1
+				MX25_PAD_LD3__LD3			0x1
+				MX25_PAD_LD4__LD4			0x1
+				MX25_PAD_LD5__LD5			0x1
+				MX25_PAD_LD6__LD6			0x1
+				MX25_PAD_LD7__LD7			0x1
+				MX25_PAD_LD8__LD8			0x1
+				MX25_PAD_LD9__LD9			0x1
+				MX25_PAD_LD10__LD10			0x1
+				MX25_PAD_LD11__LD11			0x1
+				MX25_PAD_LD12__LD12			0x1
+				MX25_PAD_LD13__LD13			0x1
+				MX25_PAD_LD14__LD14			0x1
+				MX25_PAD_LD15__LD15			0x1
+				MX25_PAD_GPIO_E__LD16			0x1
+				MX25_PAD_GPIO_F__LD17			0x1
+				MX25_PAD_HSYNC__HSYNC			0x80000000
+				MX25_PAD_VSYNC__VSYNC			0x80000000
+				MX25_PAD_LSCLK__LSCLK			0x80000000
+				MX25_PAD_OE_ACD__OE_ACD			0x80000000
+				MX25_PAD_CONTRAST__CONTRAST		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
+				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
+				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
+				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX25_PAD_UART2_RXD__UART2_RXD		0x80000000
+				MX25_PAD_UART2_TXD__UART2_TXD		0x80000000
+				MX25_PAD_UART2_RTS__UART2_RTS		0x80000000
+				MX25_PAD_UART2_CTS__UART2_CTS		0x80000000
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/src/arm/imx25-karo-tx25.dts b/src/arm/imx25-karo-tx25.dts
new file mode 100644
index 000000000000..9b31faa96377
--- /dev/null
+++ b/src/arm/imx25-karo-tx25.dts
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx25.dtsi"
+
+/ {
+	model = "Ka-Ro TX25";
+	compatible = "karo,imx25-tx25", "fsl,imx25";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_fec_phy: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "fec-phy";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 9 0>;
+			enable-active-high;
+		};
+	};
+
+	memory {
+		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
+			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
+			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
+			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
+			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
+			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
+			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
+			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
+			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
+			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
+			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
+			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
+			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			MX25_PAD_NF_CE0__NF_CE0		0x80000000
+			MX25_PAD_NFWE_B__NFWE_B		0x80000000
+			MX25_PAD_NFRE_B__NFRE_B		0x80000000
+			MX25_PAD_NFALE__NFALE		0x80000000
+			MX25_PAD_NFCLE__NFCLE		0x80000000
+			MX25_PAD_NFWP_B__NFWP_B		0x80000000
+			MX25_PAD_NFRB__NFRB		0x80000000
+			MX25_PAD_D7__D7			0x80000000
+			MX25_PAD_D6__D6			0x80000000
+			MX25_PAD_D5__D5			0x80000000
+			MX25_PAD_D4__D4			0x80000000
+			MX25_PAD_D3__D3			0x80000000
+			MX25_PAD_D2__D2			0x80000000
+			MX25_PAD_D1__D1			0x80000000
+			MX25_PAD_D0__D0			0x80000000
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-reset-gpios = <&gpio3 7 0>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_fec_phy>;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	nand-bus-width = <8>;
+	status = "okay";
+};
diff --git a/src/arm/imx25-pdk.dts b/src/arm/imx25-pdk.dts
new file mode 100644
index 000000000000..9c21b1583762
--- /dev/null
+++ b/src/arm/imx25-pdk.dts
@@ -0,0 +1,257 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx25.dtsi"
+
+/ {
+	model = "Freescale i.MX25 Product Development Kit";
+	compatible = "fsl,imx25-pdk", "fsl,imx25";
+
+	memory {
+		reg = <0x80000000 0x4000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_fec_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "fec-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 3 0>;
+			enable-active-high;
+		};
+
+		reg_2p5v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_can_3v3: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "can-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio4 6 0>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx25-pdk-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx25-pdk-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio2 1 0>;
+	wp-gpios = <&gpio2 0 0>;
+	status = "okay";
+};
+
+&fec {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio4 8 0>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 129>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	imx25-pdk {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX25_PAD_RW__AUD4_TXFS			0xe0
+				MX25_PAD_OE__AUD4_TXC			0xe0
+				MX25_PAD_EB0__AUD4_TXD			0xe0
+				MX25_PAD_EB1__AUD4_RXD			0xe0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX25_PAD_GPIO_A__CAN1_TX		0x0
+				MX25_PAD_GPIO_B__CAN1_RX		0x0
+				MX25_PAD_D14__GPIO_4_6 			0x80000000
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX25_PAD_SD1_CMD__SD1_CMD		0x80000000
+				MX25_PAD_SD1_CLK__SD1_CLK		0x80000000
+				MX25_PAD_SD1_DATA0__SD1_DATA0		0x80000000
+				MX25_PAD_SD1_DATA1__SD1_DATA1		0x80000000
+				MX25_PAD_SD1_DATA2__SD1_DATA2		0x80000000
+				MX25_PAD_SD1_DATA3__SD1_DATA3		0x80000000
+				MX25_PAD_A14__GPIO_2_0			0x80000000
+				MX25_PAD_A15__GPIO_2_1			0x80000000
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX25_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX25_PAD_FEC_MDIO__FEC_MDIO		0x400001e0
+				MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x80000000
+				MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x80000000
+				MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x80000000
+				MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x80000000
+				MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1c0
+				MX25_PAD_A17__GPIO_2_3			0x80000000
+				MX25_PAD_D12__GPIO_4_8			0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX25_PAD_I2C1_CLK__I2C1_CLK		0x80000000
+				MX25_PAD_I2C1_DAT__I2C1_DAT		0x80000000
+			>;
+		};
+
+		pinctrl_kpp: kppgrp {
+			fsl,pins = <
+				MX25_PAD_KPP_ROW0__KPP_ROW0	0x80000000
+				MX25_PAD_KPP_ROW1__KPP_ROW1	0x80000000
+				MX25_PAD_KPP_ROW2__KPP_ROW2	0x80000000
+				MX25_PAD_KPP_ROW3__KPP_ROW3	0x80000000
+				MX25_PAD_KPP_COL0__KPP_COL0	0x80000000
+				MX25_PAD_KPP_COL1__KPP_COL1	0x80000000
+				MX25_PAD_KPP_COL2__KPP_COL2	0x80000000
+				MX25_PAD_KPP_COL3__KPP_COL3	0x80000000
+			>;
+		};
+
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX25_PAD_UART1_RTS__UART1_RTS		0xe0
+				MX25_PAD_UART1_CTS__UART1_CTS		0xe0
+				MX25_PAD_UART1_TXD__UART1_TXD		0x80000000
+				MX25_PAD_UART1_RXD__UART1_RXD		0xc0
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp>;
+	linux,keymap = <
+			MATRIX_KEY(0x0, 0x0, KEY_UP)
+			MATRIX_KEY(0x0, 0x1, KEY_DOWN)
+			MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0x0, 0x3, KEY_HOME)
+			MATRIX_KEY(0x1, 0x0, KEY_RIGHT)
+			MATRIX_KEY(0x1, 0x1, KEY_LEFT)
+			MATRIX_KEY(0x1, 0x2, KEY_ENTER)
+			MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP)
+			MATRIX_KEY(0x2, 0x0, KEY_F6)
+			MATRIX_KEY(0x2, 0x1, KEY_F8)
+			MATRIX_KEY(0x2, 0x2, KEY_F9)
+			MATRIX_KEY(0x2, 0x3, KEY_F10)
+			MATRIX_KEY(0x3, 0x0, KEY_F1)
+			MATRIX_KEY(0x3, 0x1, KEY_F2)
+			MATRIX_KEY(0x3, 0x2, KEY_F3)
+			MATRIX_KEY(0x3, 0x2, KEY_POWER)
+	>;
+	status = "okay";
+};
+
+&ssi1 {
+	codec-handle = <&codec>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/src/arm/imx25-pinfunc.h b/src/arm/imx25-pinfunc.h
new file mode 100644
index 000000000000..88eebb15da6a
--- /dev/null
+++ b/src/arm/imx25-pinfunc.h
@@ -0,0 +1,523 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ * Based on imx35-pinfunc.h in the same directory Which is:
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX25_PINFUNC_H
+#define __DTS_IMX25_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX25_PAD_A10__A10			0x008 0x000 0x000 0x00 0x000
+#define MX25_PAD_A10__GPIO_4_0			0x008 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_A13__A13			0x00c 0x22C 0x000 0x00 0x000
+#define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
+
+#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x10 0x000
+#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x15 0x000
+
+#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x10 0x000
+#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x15 0x000
+
+#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x10 0x000
+#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x10 0x000
+#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x15 0x000
+
+#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x10 0x000
+#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x15 0x000
+#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x17 0x000
+
+#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x10 0x000
+#define MX25_PAD_A19__FEC_RX_ER			0x024 0x240 0x518 0x17 0x000
+#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x15 0x000
+
+#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x10 0x000
+#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x15 0x000
+#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x17 0x000
+
+#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x10 0x000
+#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x15 0x000
+#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x17 0x000
+
+#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x10 0x000
+#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x10 0x000
+#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x15 0x000
+
+#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x10 0x000
+#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x15 0x000
+#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x17 0x000
+
+#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x10 0x000
+#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x15 0x000
+#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x17 0x000
+
+#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x10 0x000
+#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x14 0x000
+#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x15 0x000
+
+#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x10 0x000
+#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x14 0x000
+#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x15 0x000
+
+#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x10 0x000
+#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x14 0x000
+#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x15 0x000
+
+#define MX25_PAD_CS0__CS0			0x04c 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS0__GPIO_4_2			0x04c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS1__CS1			0x050 0x000 0x000 0x00 0x000
+#define MX25_PAD_CS1__NF_CE3			0x050 0x000 0x000 0x01 0x000
+#define MX25_PAD_CS1__GPIO_4_3			0x050 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x10 0x000
+#define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
+#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x13 0x000
+#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x15 0x000
+
+#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x10 0x000
+#define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
+#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x13 0x000
+#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x15 0x000
+
+#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x10 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x15 0x000
+
+#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x10 0x000
+#define MX25_PAD_ECB__UART5_TXD_MUX		0x060 0x270 0x000 0x13 0x000
+#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x15 0x000
+
+#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x10 0x000
+#define MX25_PAD_LBA__UART5_RXD_MUX		0x064 0x274 0x578 0x13 0x000
+#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x15 0x000
+
+#define MX25_PAD_BCLK__BCLK			0x068 0x000 0x000 0x00 0x000
+#define MX25_PAD_BCLK__GPIO_4_4			0x068 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x10 0x000
+#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x14 0x000
+#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x15 0x000
+
+#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x10 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x10 0x000
+#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x15 0x000
+
+#define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
+#define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
+#define MX25_PAD_D15__GPIO_4_5			0x088 0x280 0x000 0x05 0x000
+
+#define MX25_PAD_D14__D14			0x08c 0x284 0x000 0x00 0x000
+#define MX25_PAD_D14__LD17			0x08c 0x284 0x000 0x01 0x000
+#define MX25_PAD_D14__GPIO_4_6			0x08c 0x284 0x000 0x05 0x000
+
+#define MX25_PAD_D13__D13			0x090 0x288 0x000 0x00 0x000
+#define MX25_PAD_D13__LD18			0x090 0x288 0x000 0x01 0x000
+#define MX25_PAD_D13__GPIO_4_7			0x090 0x288 0x000 0x05 0x000
+
+#define MX25_PAD_D12__D12			0x094 0x28c 0x000 0x00 0x000
+#define MX25_PAD_D12__GPIO_4_8			0x094 0x28c 0x000 0x05 0x000
+
+#define MX25_PAD_D11__D11			0x098 0x290 0x000 0x00 0x000
+#define MX25_PAD_D11__GPIO_4_9			0x098 0x290 0x000 0x05 0x000
+
+#define MX25_PAD_D10__D10			0x09c 0x294 0x000 0x00 0x000
+#define MX25_PAD_D10__GPIO_4_10			0x09c 0x294 0x000 0x05 0x000
+#define MX25_PAD_D10__USBOTG_OC			0x09c 0x294 0x57c 0x06 0x000
+
+#define MX25_PAD_D9__D9				0x0a0 0x298 0x000 0x00 0x000
+#define MX25_PAD_D9__GPIO_4_11			0x0a0 0x298 0x000 0x05 0x000
+#define MX25_PAD_D9__USBH2_PWR			0x0a0 0x298 0x000 0x06 0x000
+
+#define MX25_PAD_D8__D8				0x0a4 0x29c 0x000 0x00 0x000
+#define MX25_PAD_D8__GPIO_4_12			0x0a4 0x29c 0x000 0x05 0x000
+#define MX25_PAD_D8__USBH2_OC			0x0a4 0x29c 0x580 0x06 0x000
+
+#define MX25_PAD_D7__D7				0x0a8 0x2a0 0x000 0x00 0x000
+#define MX25_PAD_D7__GPIO_4_13			0x0a8 0x2a0 0x000 0x05 0x000
+
+#define MX25_PAD_D6__D6				0x0ac 0x2a4 0x000 0x00 0x000
+#define MX25_PAD_D6__GPIO_4_14			0x0ac 0x2a4 0x000 0x05 0x000
+
+#define MX25_PAD_D5__D5				0x0b0 0x2a8 0x000 0x00 0x000
+#define MX25_PAD_D5__GPIO_4_15			0x0b0 0x2a8 0x000 0x05 0x000
+
+#define MX25_PAD_D4__D4				0x0b4 0x2ac 0x000 0x00 0x000
+#define MX25_PAD_D4__GPIO_4_16			0x0b4 0x2ac 0x000 0x05 0x000
+
+#define MX25_PAD_D3__D3				0x0b8 0x2b0 0x000 0x00 0x000
+#define MX25_PAD_D3__GPIO_4_17			0x0b8 0x2b0 0x000 0x05 0x000
+
+#define MX25_PAD_D2__D2				0x0bc 0x2b4 0x000 0x00 0x000
+#define MX25_PAD_D2__GPIO_4_18			0x0bc 0x2b4 0x000 0x05 0x000
+
+#define MX25_PAD_D1__D1				0x0c0 0x2b8 0x000 0x00 0x000
+#define MX25_PAD_D1__GPIO_4_19			0x0c0 0x2b8 0x000 0x05 0x000
+
+#define MX25_PAD_D0__D0				0x0c4 0x2bc 0x000 0x00 0x000
+#define MX25_PAD_D0__GPIO_4_20			0x0c4 0x2bc 0x000 0x05 0x000
+
+#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x10 0x000
+#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x12 0x000
+#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x15 0x000
+
+#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x10 0x000
+#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x12 0x000
+#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x15 0x000
+
+#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x10 0x000
+#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x15 0x000
+
+#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x10 0x000
+#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x15 0x000
+
+#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x10 0x000
+#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x15 0x000
+
+#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x10 0x000
+#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x15 0x000
+
+#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x10 0x000
+#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x15 0x000
+
+#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x10 0x000
+#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x15 0x000
+
+#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x10 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x15 0x000
+
+#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x10 0x000
+#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x15 0x001
+
+#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x10 0x000
+#define MX25_PAD_LD10__FEC_RX_ER		0x0f0 0x2e8 0x518 0x15 0x001
+
+#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x10 0x000
+#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x15 0x001
+
+#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x15 0x001
+
+#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x15 0x000
+
+#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x15 0x000
+
+#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x15 0x001
+
+#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x10 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x15 0x000
+
+#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x10 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x15 0x000
+
+#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x10 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x15 0x000
+
+#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x15 0x000
+
+#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x10 0x000
+#define MX25_PAD_CONTRAST__CC4			0x118 0x310 0x000 0x11 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x14 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x15 0x001
+
+#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x10 0x000
+#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x15 0x000
+#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x16 0x001
+
+#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x10 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX		0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x15 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D3__UART5_TXD_MUX		0x124 0x31c 0x000 0x11 0x000
+#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x15 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x17 0x001
+
+#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x10 0x000
+#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x11 0x001
+#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x15 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x10 0x000
+#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x11 0x001
+#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x15 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x17 0x000
+
+#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x10 0x000
+#define MX25_PAD_CSI_D6__SDHC2_CMD		0x130 0x328 0x4e0 0x12 0x001
+#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x10 0x000
+#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		0x134 0x32C 0x4dc 0x12 0x001
+#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x10 0x000
+#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x12 0x001
+#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x15 0x000
+#define MX25_PAD_CSI_D8__CSPI3_SS2		0x138 0x330 0x4c4 0x17 0x000
+
+#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x10 0x000
+#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x12 0x001
+#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x15 0x000
+#define MX25_PAD_CSI_D9__CSPI3_SS3		0x13c 0x334 0x4c8 0x17 0x000
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x10 0x000
+#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x11 0x001
+#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		0x140 0x338 0x4e4 0x12 0x001
+#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x10 0x000
+#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x11 0x001
+#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		0x144 0x33c 0x4e8 0x12 0x001
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x10 0x000
+#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x11 0x001
+#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		0x148 0x340 0x4ec 0x12 0x001
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x15 0x000
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x10 0x000
+#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x11 0x001
+#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		0x14c 0x344 0x4f0 0x12 0x001
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x10 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x15 0x000
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x10 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MOSI__UART3_RXD		0x158 0x350 0x000 0x12 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_MISO__UART3_TXD		0x15c 0x354 0x000 0x12 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS0__PWM2_PWMO		0x160 0x358 0x000 0x12 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SS1__I2C3_DAT		0x164 0x35C 0x528 0x11 0x001
+#define MX25_PAD_CSPI1_SS1__UART3_RTS		0x164 0x35c 0x000 0x12 0x000
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_SCLK__UART3_CTS		0x168 0x360 0x000 0x12 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x15 0x000
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x10 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x10 0x000
+#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x10 0x000
+#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x10 0x000
+#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x11 0x001
+#define MX25_PAD_UART1_RTS__CC3			0x178 0x370 0x000 0x12 0x000
+#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x15 0x000
+
+#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x10 0x000
+#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x11 0x001
+#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x10 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x10 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x10 0x000
+#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x12 0x002
+#define MX25_PAD_UART2_RTS__CC1			0x188 0x380 0x000 0x13 0x000
+#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x15 0x000
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER		0x18c 0x384 0x518 0x12 0x002
+#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x10 0x000
+#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CMD__SD1_CMD		0x190 0x388 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__CSPI2_MOSI		0x190 0x388 0x4a0 0x11 0x001
+#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x12 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_CLK__SD1_CLK		0x194 0x38c 0x000 0x10 0x000
+#define MX25_PAD_SD1_CLK__CSPI2_MISO		0x194 0x38c 0x49c 0x11 0x001
+#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x12 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0		0x198 0x390 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA0__CSPI2_SCLK		0x198 0x390 0x494 0x11 0x001
+#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1		0x19c 0x394 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x13 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x15 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x15 0x000
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x10 0x000
+#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x10 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x13 0x002
+#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x10 0x000
+#define MX25_PAD_KPP_ROW3__CSI_LD1		0x1b4 0x3ac 0x48c 0x13 0x002
+#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD_MUX	0x1b8 0x3b0 0x570 0x11 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD_MUX	0x1bc 0x3b4 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x15 0x000
+
+#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x10 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x11 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x12 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x12 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x10 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x12 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x10 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x12 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x10 0x000
+#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x14 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x15 0x000
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x10 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x15 0x000
+
+#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x10 0x000
+#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x11 0x000
+#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x15 0x000
+
+#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x10 0x000
+#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x15 0x000
+
+#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
+
+#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x10 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x16 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x12 0x000
+
+#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x10 0x000
+#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
+#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x12 0x001
+
+#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x10 0x000
+#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x16 0x000
+
+#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x10 0x000
+#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x16 0x001
+
+#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x10 0x000
+#define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x11 0x002
+#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x12 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x14 0x000
+
+#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x10 0x000
+#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x12 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x14 0x000
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x10 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x10 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x15 0x000
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x14 0x000
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x15 0x000
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x10 0x000
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x15 0x000
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x10 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x14 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x15 0x000
+
+#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x10 0x000
+#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x15 0x000
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000
+
+#endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/src/arm/imx25.dtsi b/src/arm/imx25.dtsi
new file mode 100644
index 000000000000..e4d3aecc4ed2
--- /dev/null
+++ b/src/arm/imx25.dtsi
@@ -0,0 +1,569 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx25-pinfunc.h"
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		spi2 = &spi3;
+		usb0 = &usbotg;
+		usb1 = &usbhost1;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	asic: asic-interrupt-controller@68000000 {
+		compatible = "fsl,imx25-asic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x8000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&asic>;
+		ranges;
+
+		aips@43f00000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			i2c1: i2c@43f80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f80000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <3>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f84000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			can1: can@43f88000 {
+				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+				reg = <0x43f88000 0x4000>;
+				interrupts = <43>;
+				clocks = <&clks 75>, <&clks 75>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: can@43f8c000 {
+				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+				reg = <0x43f8c000 0x4000>;
+				interrupts = <44>;
+				clocks = <&clks 76>, <&clks 76>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				interrupts = <45>;
+				clocks = <&clks 120>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks 121>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f98000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <4>;
+				status = "disabled";
+			};
+
+			owire@43f9c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x43f9c000 0x4000>;
+				clocks = <&clks 51>;
+				clock-names = "";
+				interrupts = <2>;
+				status = "disabled";
+			};
+
+			spi1: cspi@43fa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x43fa4000 0x4000>;
+				clocks = <&clks 78>, <&clks 78>;
+				clock-names = "ipg", "per";
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			kpp: kpp@43fa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
+				reg = <0x43fa8000 0x4000>;
+				clocks = <&clks 102>;
+				clock-names = "";
+				interrupts = <24>;
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@43fac000 {
+				compatible = "fsl,imx25-iomuxc";
+				reg = <0x43fac000 0x4000>;
+			};
+
+			audmux: audmux@43fb0000 {
+				compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
+				reg = <0x43fb0000 0x4000>;
+				status = "disabled";
+			};
+		};
+
+		spba@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x40000>;
+			ranges;
+
+			spi3: cspi@50004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x50004000 0x4000>;
+				interrupts = <0>;
+				clocks = <&clks 80>, <&clks 80>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@50008000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x50008000 0x4000>;
+				interrupts = <5>;
+				clocks = <&clks 123>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				interrupts = <18>;
+				clocks = <&clks 122>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			spi2: cspi@50010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x50010000 0x4000>;
+				clocks = <&clks 79>, <&clks 79>;
+				clock-names = "ipg", "per";
+				interrupts = <13>;
+				status = "disabled";
+			};
+
+			ssi2: ssi@50014000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+				reg = <0x50014000 0x4000>;
+				interrupts = <11>;
+				clocks = <&clks 118>;
+				clock-names = "ipg";
+				dmas = <&sdma 24 1 0>,
+				       <&sdma 25 1 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			esai@50018000 {
+				reg = <0x50018000 0x4000>;
+				interrupts = <7>;
+			};
+
+			uart5: serial@5002c000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x5002c000 0x4000>;
+				interrupts = <40>;
+				clocks = <&clks 124>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			tsc: tsc@50030000 {
+				compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
+				reg = <0x50030000 0x4000>;
+				interrupts = <46>;
+				clocks = <&clks 119>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			ssi1: ssi@50034000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+				reg = <0x50034000 0x4000>;
+				interrupts = <12>;
+				clocks = <&clks 117>;
+				clock-names = "ipg";
+				dmas = <&sdma 28 1 0>,
+				       <&sdma 29 1 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			fec: ethernet@50038000 {
+				compatible = "fsl,imx25-fec";
+				reg = <0x50038000 0x4000>;
+				interrupts = <57>;
+				clocks = <&clks 88>, <&clks 65>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+		};
+
+		aips@53f00000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			clks: ccm@53f80000 {
+				compatible = "fsl,imx25-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>;
+				#clock-cells = <1>;
+			};
+
+			gpt4: timer@53f84000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f84000 0x4000>;
+				clocks = <&clks 95>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <1>;
+			};
+
+			gpt3: timer@53f88000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f88000 0x4000>;
+				clocks = <&clks 94>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <29>;
+			};
+
+			gpt2: timer@53f8c000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f8c000 0x4000>;
+				clocks = <&clks 93>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <53>;
+			};
+
+			gpt1: timer@53f90000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				clocks = <&clks 92>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <54>;
+			};
+
+			epit1: timer@53f94000 {
+				compatible = "fsl,imx25-epit";
+				reg = <0x53f94000 0x4000>;
+				interrupts = <28>;
+			};
+
+			epit2: timer@53f98000 {
+				compatible = "fsl,imx25-epit";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <27>;
+			};
+
+			gpio4: gpio@53f9c000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53f9c000 0x4000>;
+				interrupts = <23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pwm2: pwm@53fa0000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
+				reg = <0x53fa0000 0x4000>;
+				clocks = <&clks 106>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <36>;
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <16>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pwm3: pwm@53fa8000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
+				reg = <0x53fa8000 0x4000>;
+				clocks = <&clks 107>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <41>;
+			};
+
+			esdhc1: esdhc@53fb4000 {
+				compatible = "fsl,imx25-esdhc";
+				reg = <0x53fb4000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 86>, <&clks 63>, <&clks 45>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc2: esdhc@53fb8000 {
+				compatible = "fsl,imx25-esdhc";
+				reg = <0x53fb8000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 87>, <&clks 64>, <&clks 46>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			lcdc: lcdc@53fbc000 {
+				compatible = "fsl,imx25-fb", "fsl,imx21-fb";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			slcdc@53fc0000 {
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <38>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@53fc8000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				reg = <0x53fc8000 0x4000>;
+				clocks = <&clks 108>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <42>;
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: sdma@53fd4000 {
+				compatible = "fsl,imx25-sdma";
+				reg = <0x53fd4000 0x4000>;
+				clocks = <&clks 112>, <&clks 68>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				interrupts = <34>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
+			};
+
+			wdog@53fdc000 {
+				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 126>;
+				clock-names = "";
+				interrupts = <55>;
+			};
+
+			pwm1: pwm@53fe0000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
+				reg = <0x53fe0000 0x4000>;
+				clocks = <&clks 105>, <&clks 52>;
+				clock-names = "ipg", "per";
+				interrupts = <26>;
+			};
+
+			iim: iim@53ff0000 {
+				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 99>;
+			};
+
+			usbotg: usb@53ff4000 {
+				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+				reg = <0x53ff4000 0x0200>;
+				interrupts = <37>;
+				clocks = <&clks 70>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbhost1: usb@53ff4400 {
+				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+				reg = <0x53ff4400 0x0200>;
+				interrupts = <35>;
+				clocks = <&clks 70>;
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53ff4600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx25-usbmisc";
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
+				reg = <0x53ff4600 0x00f>;
+			};
+
+			dryice@53ffc000 {
+				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
+				reg = <0x53ffc000 0x4000>;
+				clocks = <&clks 81>;
+				clock-names = "ipg";
+				interrupts = <25>;
+			};
+		};
+
+		iram: sram@78000000 {
+			compatible = "mmio-sram";
+			reg = <0x78000000 0x20000>;
+		};
+
+		emi@80000000 {
+			compatible = "fsl,emi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3b002000>;
+			ranges;
+
+			nfc: nand@bb000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				compatible = "fsl,imx25-nand";
+				reg = <0xbb000000 0x2000>;
+				clocks = <&clks 50>;
+				clock-names = "";
+				interrupts = <33>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usb-phy@0 {
+			reg = <0>;
+			compatible = "usb-nop-xceiv";
+		};
+
+		usbphy1: usb-phy@1 {
+			reg = <1>;
+			compatible = "usb-nop-xceiv";
+		};
+	};
+};
diff --git a/src/arm/imx27-apf27.dts b/src/arm/imx27-apf27.dts
new file mode 100644
index 000000000000..73aae4f5e539
--- /dev/null
+++ b/src/arm/imx27-apf27.dts
@@ -0,0 +1,124 @@
+/*
+ * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
+ * Copyright 2012 Armadeus Systems <support@armadeus.com>
+ *
+ * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Armadeus Systems APF27 module";
+	compatible = "armadeus,imx27-apf27", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x04000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc26m {
+			compatible = "fsl,imx-osc26m", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+};
+
+&iomuxc {
+	imx27-apf27 {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&nfc {
+	status = "okay";
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "env";
+		reg = <0x100000 0x80000>;
+	};
+
+	partition@180000 {
+		label = "env2";
+		reg = <0x180000 0x80000>;
+	};
+
+	partition@200000 {
+		label = "firmware";
+		reg = <0x200000 0x80000>;
+	};
+
+	partition@280000 {
+		label = "dtb";
+		reg = <0x280000 0x80000>;
+	};
+
+	partition@300000 {
+		label = "kernel";
+		reg = <0x300000 0x500000>;
+	};
+
+	partition@800000 {
+		label = "rootfs";
+		reg = <0x800000 0xf800000>;
+	};
+};
diff --git a/src/arm/imx27-apf27dev.dts b/src/arm/imx27-apf27dev.dts
new file mode 100644
index 000000000000..bba3f41b89ef
--- /dev/null
+++ b/src/arm/imx27-apf27dev.dts
@@ -0,0 +1,264 @@
+/*
+ * Copyright 2013 Armadeus Systems - <support@armadeus.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/* APF27Dev is a docking board for the APF27 SOM */
+#include "imx27-apf27.dts"
+
+/ {
+	model = "Armadeus Systems APF27Dev docking/development board";
+	compatible = "armadeus,imx27-apf27dev", "armadeus,imx27-apf27", "fsl,imx27";
+
+	display: display {
+		model = "Chimei-LW700AT9003";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xfae80083>;	/* non-standard but required */
+		display-timings {
+			timing0: 800x480 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-key {
+			label = "user";
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <276>; /* BTN_EXTRA */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_max5821: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "max5821-reg";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&cspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
+	status = "okay";
+
+	adc@0 {
+		compatible = "maxim,max1027";
+		reg = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_max1027>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&cspi2 {
+	fsl,spi-num-chipselects = <3>;
+	cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>,
+		   <&gpio2 17 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi2 &pinctrl_cspi2_cs>;
+	status = "okay";
+};
+
+&fb {
+	display = <&display>;
+	fsl,dmacr = <0x00020010>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+
+	max5821@38 {
+		compatible = "maxim,max5821";
+		reg = <0x38>;
+		vref-supply = <&reg_max5821>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-apf27dev {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+			>;
+		};
+
+		pinctrl_cspi1_cs: cspi1csgrp {
+			fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
+		};
+
+		pinctrl_cspi2: cspi2grp {
+			fsl,pins = <
+				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+			>;
+		};
+
+		pinctrl_cspi2_cs: cspi2csgrp {
+			fsl,pins = <
+				MX27_PAD_CSI_D5__GPIO2_17 0x0
+				MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
+				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
+		};
+
+		pinctrl_imxfb1: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_CLS__CLS 0x0
+				MX27_PAD_CONTRAST__CONTRAST 0x0
+				MX27_PAD_LD0__LD0 0x0
+				MX27_PAD_LD1__LD1 0x0
+				MX27_PAD_LD2__LD2 0x0
+				MX27_PAD_LD3__LD3 0x0
+				MX27_PAD_LD4__LD4 0x0
+				MX27_PAD_LD5__LD5 0x0
+				MX27_PAD_LD6__LD6 0x0
+				MX27_PAD_LD7__LD7 0x0
+				MX27_PAD_LD8__LD8 0x0
+				MX27_PAD_LD9__LD9 0x0
+				MX27_PAD_LD10__LD10 0x0
+				MX27_PAD_LD11__LD11 0x0
+				MX27_PAD_LD12__LD12 0x0
+				MX27_PAD_LD13__LD13 0x0
+				MX27_PAD_LD14__LD14 0x0
+				MX27_PAD_LD15__LD15 0x0
+				MX27_PAD_LD16__LD16 0x0
+				MX27_PAD_LD17__LD17 0x0
+				MX27_PAD_LSCLK__LSCLK 0x0
+				MX27_PAD_OE_ACD__OE_ACD 0x0
+				MX27_PAD_PS__PS 0x0
+				MX27_PAD_REV__REV 0x0
+				MX27_PAD_SPL_SPR__SPL_SPR 0x0
+				MX27_PAD_HSYNC__HSYNC 0x0
+				MX27_PAD_VSYNC__VSYNC 0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_max1027: max1027 {
+			 fsl,pins = <
+				 MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */
+				 MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */
+			>;
+		};
+
+		pinctrl_pwm: pwmgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__PWMO 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+			>;
+		};
+
+		pinctrl_sdhc2_cd: sdhc2cdgrp {
+			fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
+		};
+	};
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2 &pinctrl_sdhc2_cd>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm>;
+};
diff --git a/src/arm/imx27-eukrea-cpuimx27.dtsi b/src/arm/imx27-eukrea-cpuimx27.dtsi
new file mode 100644
index 000000000000..e2242638ea0b
--- /dev/null
+++ b/src/arm/imx27-eukrea-cpuimx27.dtsi
@@ -0,0 +1,296 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX27";
+	compatible = "eukrea,cpuimx27", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x04000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		clk14745600: clock@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <14745600>;
+			reg = <0>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x04000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
+	};
+
+	uart8250@3,200000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_1>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x200000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,400000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_2>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x400000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,800000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_3>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x800000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,1000000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_4>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x1000000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
+				MX27_PAD_ATA_DATA13__FEC_COL		0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA		0x0
+				MX27_PAD_I2C_CLK__I2C_CLK		0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB			0x0
+				MX27_PAD_NFCLE__NFCLE			0x0
+				MX27_PAD_NFWP_B__NFWP_B			0x0
+				MX27_PAD_NFCE_B__NFCE_B			0x0
+				MX27_PAD_NFALE__NFALE			0x0
+				MX27_PAD_NFRE_B__NFRE_B			0x0
+				MX27_PAD_NFWE_B__NFWE_B			0x0
+			>;
+		};
+
+		pinctrl_owire: owiregrp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE			0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK		0x0
+				MX27_PAD_SD2_CMD__SD2_CMD		0x0
+				MX27_PAD_SD2_D0__SD2_D0			0x0
+				MX27_PAD_SD2_D1__SD2_D1			0x0
+				MX27_PAD_SD2_D2__SD2_D2			0x0
+				MX27_PAD_SD2_D3__SD2_D3			0x0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
+				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
+				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
+				MX27_PAD_USBH1_FS__UART4_RTS		0x0
+			>;
+		};
+
+		pinctrl_uart8250_1: uart82501grp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23		0x0
+			>;
+		};
+
+		pinctrl_uart8250_2: uart82502grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
+			>;
+		};
+
+		pinctrl_uart8250_3: uart82503grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
+			>;
+		};
+
+		pinctrl_uart8250_4: uart82504grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
+				MX27_PAD_USBH2_STP__USBH2_STP		0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts b/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts
new file mode 100644
index 000000000000..2ab65fc4c1e1
--- /dev/null
+++ b/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -0,0 +1,273 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-eukrea-cpuimx27.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD27";
+	compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
+
+	display0: CMO-QVGA {
+		model = "CMO-QVGA";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfad08b80>;
+
+		display-timings {
+			timing0: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <20>;
+				hsync-len = <30>;
+				hfront-porch = <38>;
+				vback-porch = <4>;
+				vsync-len = <3>;
+				vfront-porch = <15>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds>;
+
+		led1 {
+			label = "system::live";
+			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "system::user";
+			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		reg_lcd: regulator@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcdreg>;
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "LCD";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	ads7846 {
+		compatible = "ti,ads7846";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		reg = <0>;
+		interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		spi-cpol;
+		spi-max-frequency = <1500000>;
+		ti,keep-vref-on;
+	};
+};
+
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb>;
+	display = <&display0>;
+	lcd-supply = <&reg_lcd>;
+	fsl,dmacr = <0x00040060>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
+&i2c1 {
+	codec: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&kpp {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+	>;
+	status = "okay";
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	codec-handle = <&codec>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27-baseboard {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO	0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI	0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK	0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* CS0 */
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__GPIO5_5		0x0
+			>;
+		};
+
+		pinctrl_gpioleds: gpioledsgrp {
+			fsl,pins = <
+				MX27_PAD_PC_PWRON__GPIO6_16	0x0
+				MX27_PAD_PC_CD2_B__GPIO6_19	0x0
+			>;
+		};
+
+		pinctrl_imxfb: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0		0x0
+				MX27_PAD_LD1__LD1		0x0
+				MX27_PAD_LD2__LD2		0x0
+				MX27_PAD_LD3__LD3		0x0
+				MX27_PAD_LD4__LD4		0x0
+				MX27_PAD_LD5__LD5		0x0
+				MX27_PAD_LD6__LD6		0x0
+				MX27_PAD_LD7__LD7		0x0
+				MX27_PAD_LD8__LD8		0x0
+				MX27_PAD_LD9__LD9		0x0
+				MX27_PAD_LD10__LD10		0x0
+				MX27_PAD_LD11__LD11		0x0
+				MX27_PAD_LD12__LD12		0x0
+				MX27_PAD_LD13__LD13		0x0
+				MX27_PAD_LD14__LD14		0x0
+				MX27_PAD_LD15__LD15		0x0
+				MX27_PAD_LD16__LD16		0x0
+				MX27_PAD_LD17__LD17		0x0
+				MX27_PAD_CONTRAST__CONTRAST	0x0
+				MX27_PAD_OE_ACD__OE_ACD		0x0
+				MX27_PAD_HSYNC__HSYNC		0x0
+				MX27_PAD_VSYNC__VSYNC		0x0
+			>;
+		};
+
+		pinctrl_lcdreg: lcdreggrp {
+			fsl,pins = <
+				MX27_PAD_CLS__GPIO1_25		0x0
+			>;
+		};
+
+		pinctrl_sdhc1: sdhc1grp {
+			fsl,pins = <
+				MX27_PAD_SD1_CLK__SD1_CLK	0x0
+				MX27_PAD_SD1_CMD__SD1_CMD	0x0
+				MX27_PAD_SD1_D0__SD1_D0		0x0
+				MX27_PAD_SD1_D1__SD1_D1		0x0
+				MX27_PAD_SD1_D2__SD1_D2		0x0
+				MX27_PAD_SD1_D3__SD1_D3		0x0
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI4_CLK__SSI4_CLK	0x0
+				MX27_PAD_SSI4_FS__SSI4_FS	0x0
+				MX27_PAD_SSI4_RXDAT__SSI4_RXDAT	0x1
+				MX27_PAD_SSI4_TXDAT__SSI4_TXDAT	0x1
+			>;
+		};
+
+		pinctrl_touch: touchgrp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_RDY__GPIO4_25	0x0 /* IRQ */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD	0x0
+				MX27_PAD_UART1_RXD__UART1_RXD	0x0
+				MX27_PAD_UART1_CTS__UART1_CTS	0x0
+				MX27_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD	0x0
+				MX27_PAD_UART2_RXD__UART2_RXD	0x0
+				MX27_PAD_UART2_CTS__UART2_CTS	0x0
+				MX27_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD	0x0
+				MX27_PAD_UART3_RXD__UART3_RXD	0x0
+				MX27_PAD_UART3_CTS__UART3_CTS	0x0
+				MX27_PAD_UART3_RTS__UART3_RTS	0x0
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx27-pdk.dts b/src/arm/imx27-pdk.dts
new file mode 100644
index 000000000000..49450dbbcab8
--- /dev/null
+++ b/src/arm/imx27-pdk.dts
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Freescale i.MX27 Product Development Kit";
+	compatible = "fsl,imx27-pdk", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>;
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usbphy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
+			clock-names = "main_clk";
+		};
+	};
+};
+
+&cspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi2>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13783@0 {
+		compatible = "fsl,mc13783";
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+
+		regulators {
+			vgen_reg: vgen {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc1_reg: vmmc1 {
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			gpo1_reg: gpo1 {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			gpo3_reg: gpo3 {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-mode = "mii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&kpp {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+		MATRIX_KEY(1, 2, KEY_ENTER)
+		MATRIX_KEY(2, 0, KEY_F6)
+		MATRIX_KEY(2, 1, KEY_F8)
+		MATRIX_KEY(2, 2, KEY_F9)
+		MATRIX_KEY(2, 3, KEY_F10)
+	>;
+	status = "okay";
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	fsl,usbphy = <&usbphy0>;
+	phy_type = "ulpi";
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-pdk {
+		pinctrl_cspi2: cspi2grp {
+			fsl,pins = <
+				MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+				MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+				MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+				MX27_PAD_CSPI2_SS0__GPIO4_21	0x0 /* SPI2 CS0 */
+				MX27_PAD_TOUT__GPIO3_14		0x0 /* PMIC IRQ */
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_nand: nandgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB	0x0
+				MX27_PAD_NFCLE__NFCLE	0x0
+				MX27_PAD_NFWP_B__NFWP_B	0x0
+				MX27_PAD_NFCE_B__NFCE_B	0x0
+				MX27_PAD_NFALE__NFALE	0x0
+				MX27_PAD_NFRE_B__NFRE_B	0x0
+				MX27_PAD_NFWE_B__NFWE_B	0x0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx27-phytec-phycard-s-rdk.dts b/src/arm/imx27-phytec-phycard-s-rdk.dts
new file mode 100644
index 000000000000..7c869fe3c30b
--- /dev/null
+++ b/src/arm/imx27-phytec-phycard-s-rdk.dts
@@ -0,0 +1,168 @@
+/*
+ * Copyright 2012 Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-phytec-phycard-s-som.dtsi"
+
+/ {
+	model = "Phytec pca100 rapid development kit";
+	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	display: display {
+		model = "Primeview-PD050VL1";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
+		display-timings {
+			timing0: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <112>;
+				hfront-porch = <36>;
+				hsync-len = <32>;
+				vback-porch = <33>;
+				vfront-porch = <33>;
+				vsync-len = <2>;
+				clock-frequency = <25000000>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&fb {
+	display = <&display>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		vcc-supply = <&reg_3v3>;
+		reg = <0x64>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-rdk {
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_owire1: owire1grp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+				MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD 0x0
+				MX27_PAD_UART3_RXD__UART3_RXD 0x0
+				MX27_PAD_UART3_CTS__UART3_CTS 0x0
+				MX27_PAD_UART3_RTS__UART3_RTS 0x0
+			>;
+		};
+	};
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire1>;
+	status = "okay";
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
diff --git a/src/arm/imx27-phytec-phycard-s-som.dtsi b/src/arm/imx27-phytec-phycard-s-som.dtsi
new file mode 100644
index 000000000000..1b6248079682
--- /dev/null
+++ b/src/arm/imx27-phytec-phycard-s-som.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+};
+
+&cspi1 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-som {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/src/arm/imx27-phytec-phycore-rdk.dts b/src/arm/imx27-phytec-phycore-rdk.dts
new file mode 100644
index 000000000000..538568b0de26
--- /dev/null
+++ b/src/arm/imx27-phytec-phycore-rdk.dts
@@ -0,0 +1,324 @@
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-phytec-phycore-som.dtsi"
+
+/ {
+	model = "Phytec pcm970";
+	compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	display0: LQ035Q7 {
+		model = "Sharp-LQ035Q7";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xf00080c0>;
+
+		display-timings {
+			timing0: 240x320 {
+				clock-frequency = <5500000>;
+				hactive = <240>;
+				vactive = <320>;
+				hback-porch = <5>;
+				hsync-len = <7>;
+				hfront-porch = <16>;
+				vback-porch = <7>;
+				vsync-len = <1>;
+				vfront-porch = <9>;
+				pixelclk-active = <1>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <0>;
+			};
+		};
+	};
+
+	regulators {
+		regulator@2 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_csien>;
+			reg = <2>;
+			regulator-name = "CSI_EN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			regulator-always-on;
+		};
+	};
+
+	usbphy {
+		usbphy2: usbphy@2 {
+			compatible = "usb-nop-xceiv";
+			reg = <2>;
+			vcc-supply = <&reg_5v0>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
+			clock-names = "main_clk";
+		};
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>;
+};
+
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb1>;
+	display = <&display0>;
+	lcd-supply = <&reg_5v0>;
+	fsl,dmacr = <0x00020010>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	camgpio: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&iomuxc {
+	imx27_phycore_rdk {
+		pinctrl_csien: csiengrp {
+			fsl,pins = <
+				MX27_PAD_USB_OC_B__GPIO2_24 0x0
+			>;
+		};
+
+		pinctrl_cspi1cs1: cspi1cs1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+			>;
+		};
+
+		pinctrl_imxfb1: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0 0x0
+				MX27_PAD_LD1__LD1 0x0
+				MX27_PAD_LD2__LD2 0x0
+				MX27_PAD_LD3__LD3 0x0
+				MX27_PAD_LD4__LD4 0x0
+				MX27_PAD_LD5__LD5 0x0
+				MX27_PAD_LD6__LD6 0x0
+				MX27_PAD_LD7__LD7 0x0
+				MX27_PAD_LD8__LD8 0x0
+				MX27_PAD_LD9__LD9 0x0
+				MX27_PAD_LD10__LD10 0x0
+				MX27_PAD_LD11__LD11 0x0
+				MX27_PAD_LD12__LD12 0x0
+				MX27_PAD_LD13__LD13 0x0
+				MX27_PAD_LD14__LD14 0x0
+				MX27_PAD_LD15__LD15 0x0
+				MX27_PAD_LD16__LD16 0x0
+				MX27_PAD_LD17__LD17 0x0
+				MX27_PAD_CLS__CLS 0x0
+				MX27_PAD_CONTRAST__CONTRAST 0x0
+				MX27_PAD_LSCLK__LSCLK 0x0
+				MX27_PAD_OE_ACD__OE_ACD 0x0
+				MX27_PAD_PS__PS 0x0
+				MX27_PAD_REV__REV 0x0
+				MX27_PAD_SPL_SPR__SPL_SPR 0x0
+				MX27_PAD_HSYNC__HSYNC 0x0
+				MX27_PAD_VSYNC__VSYNC 0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			/* Add pullup to DATA line */
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA	0x1
+				MX27_PAD_I2C_CLK__I2C_CLK	0x0
+			>;
+		};
+
+		pinctrl_owire1: owire1grp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+				MX27_PAD_SSI3_FS__GPIO3_28	0x0 /* WP */
+				MX27_PAD_SSI3_RXDAT__GPIO3_29	0x0 /* CD */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
+				MX27_PAD_USBH2_STP__USBH2_STP 0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
+			>;
+		};
+
+		pinctrl_weim: weimgrp {
+			fsl,pins = <
+				MX27_PAD_CS4_B__CS4_B		0x0 /* CS4 */
+				MX27_PAD_SD1_D1__GPIO5_19	0x0 /* CAN IRQ */
+			>;
+		};
+	};
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire1>;
+	status = "okay";
+};
+
+&pmicleds {
+	ledr1: led@3 {
+		reg = <3>;
+		label = "system:red1:user";
+	};
+
+	ledg1: led@4 {
+		reg = <4>;
+		label = "system:green1:user";
+	};
+
+	ledb1: led@5 {
+		reg = <5>;
+		label = "system:blue1:user";
+	};
+
+	ledr2: led@6 {
+		reg = <6>;
+		label = "system:red2:user";
+	};
+
+	ledg2: led@7 {
+		reg = <7>;
+		label = "system:green2:user";
+	};
+
+	ledb2: led@8 {
+		reg = <8>;
+		label = "system:blue2:user";
+	};
+
+	ledr3: led@9 {
+		reg = <9>;
+		label = "system:red3:nand";
+		linux,default-trigger = "nand-disk";
+	};
+
+	ledg3: led@10 {
+		reg = <10>;
+		label = "system:green3:live";
+		linux,default-trigger = "heartbeat";
+	};
+
+	ledb3: led@11 {
+		reg = <11>;
+		label = "system:blue3:cpu";
+		linux,default-trigger = "cpu0";
+	};
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vmmc1_reg>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	vbus-supply = <&reg_5v0>;
+	fsl,usbphy = <&usbphy2>;
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+
+	can@4,0 {
+		compatible = "nxp,sja1000";
+		reg = <4 0x00000000 0x00000100>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		nxp,external-clock-frequency = <16000000>;
+		nxp,tx-output-config = <0x16>;
+		nxp,no-comparator-bypass;
+		fsl,weim-cs-timing = <0x0000dcf6 0x444a0301 0x44443302>;
+	};
+};
diff --git a/src/arm/imx27-phytec-phycore-som.dtsi b/src/arm/imx27-phytec-phycore-som.dtsi
new file mode 100644
index 000000000000..b4e955e3be8d
--- /dev/null
+++ b/src/arm/imx27-phytec-phycore-som.dtsi
@@ -0,0 +1,349 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pcm038";
+	compatible = "phytec,imx27-pcm038", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_5v0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5V0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usbphy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			vcc-supply = <&sw3_reg>;
+			clocks = <&clks IMX27_CLK_DUMMY>;
+			clock-names = "main_clk";
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	/* SSI0 <=> PINS_4 (MC13783 Audio) */
+	ssi0 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <0xcb205000>;
+	};
+
+	pins4 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <0x00001000>;
+	};
+};
+
+&cspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	pmic: mc13783@0 {
+		compatible = "fsl,mc13783";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <20000000>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		pmicleds: leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x001 0x000 0x000 0x000 0x000 0x000>;
+		};
+
+		regulators {
+			/* SW1A and SW1B joined operation */
+			sw1_reg: sw1a {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1520000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* SW2A and SW2B joined operation */
+			sw2_reg: sw2a {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			violo_reg: violo {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			viohi_reg: viohi {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen_reg: vgen {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vrf1_reg: vrf1 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vrf2_reg: vrf2 {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc1_reg: vmmc1 {
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			gpo1_reg: gpo1 { };
+
+			pwgt1spi_reg: pwgt1spi {
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&fec {
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	lm75@4a {
+		compatible = "national,lm75";
+		reg = <0x4a>;
+	};
+};
+
+&iomuxc {
+	imx27_phycore_som {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* SPI1 CS0 */
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+				MX27_PAD_SSI3_TXDAT__GPIO3_30	0x0 /* FEC RST */
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23	0x0 /* PMIC IRQ */
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI1_FS__SSI1_FS 0x0
+				MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
+				MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
+				MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbphy0>;
+	vbus-supply = <&sw3_reg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x22c2cf00 0x75000d01 0x00000900>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	sram: sram@1,0 {
+		compatible = "mtd-ram";
+		reg = <1 0x00000000 0x00800000>;
+		bank-width = <2>;
+		linux,mtd-name = "mtd-ram.0";
+		fsl,weim-cs-timing = <0x0000d843 0x22252521 0x22220a00>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/src/arm/imx27-pinfunc.h b/src/arm/imx27-pinfunc.h
new file mode 100644
index 000000000000..597bb5f74dcc
--- /dev/null
+++ b/src/arm/imx27-pinfunc.h
@@ -0,0 +1,480 @@
+/*
+ * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DTS_IMX27_PINFUNC_H
+#define __DTS_IMX27_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function:      0 - Primary function
+ *                1 - Alternate function
+ *                2 - GPIO
+ * direction:     0 - Input
+ *                1 - Output
+ * gpio_oconf:    0 - A_IN
+ *                1 - B_IN
+ *                2 - C_IN
+ *                3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ *                1 - Interrupt Status Register
+ *                2 - 0
+ *                3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ * number on the specific port (between 0 and 31).
+ */
+
+#define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
+#define MX27_PAD_USBH2_CLK__GPIO1_0                        0x00 0x032
+#define MX27_PAD_USBH2_DIR__USBH2_DIR                      0x01 0x000
+#define MX27_PAD_USBH2_DIR__GPIO1_1                        0x01 0x032
+#define MX27_PAD_USBH2_DATA7__USBH2_DATA7                  0x02 0x004
+#define MX27_PAD_USBH2_DATA7__GPIO1_2                      0x02 0x032
+#define MX27_PAD_USBH2_NXT__USBH2_NXT                      0x03 0x000
+#define MX27_PAD_USBH2_NXT__GPIO1_3                        0x03 0x032
+#define MX27_PAD_USBH2_STP__USBH2_STP                      0x04 0x004
+#define MX27_PAD_USBH2_STP__GPIO1_4                        0x04 0x032
+#define MX27_PAD_LSCLK__LSCLK                              0x05 0x004
+#define MX27_PAD_LSCLK__GPIO1_5                            0x05 0x032
+#define MX27_PAD_LD0__LD0                                  0x06 0x004
+#define MX27_PAD_LD0__GPIO1_6                              0x06 0x032
+#define MX27_PAD_LD1__LD1                                  0x07 0x004
+#define MX27_PAD_LD1__GPIO1_7                              0x07 0x032
+#define MX27_PAD_LD2__LD2                                  0x08 0x004
+#define MX27_PAD_LD2__GPIO1_8                              0x08 0x032
+#define MX27_PAD_LD3__LD3                                  0x09 0x004
+#define MX27_PAD_LD3__GPIO1_9                              0x09 0x032
+#define MX27_PAD_LD4__LD4                                  0x0a 0x004
+#define MX27_PAD_LD4__GPIO1_10                             0x0a 0x032
+#define MX27_PAD_LD5__LD5                                  0x0b 0x004
+#define MX27_PAD_LD5__GPIO1_11                             0x0b 0x032
+#define MX27_PAD_LD6__LD6                                  0x0c 0x004
+#define MX27_PAD_LD6__GPIO1_12                             0x0c 0x032
+#define MX27_PAD_LD7__LD7                                  0x0d 0x004
+#define MX27_PAD_LD7__GPIO1_13                             0x0d 0x032
+#define MX27_PAD_LD8__LD8                                  0x0e 0x004
+#define MX27_PAD_LD8__GPIO1_14                             0x0e 0x032
+#define MX27_PAD_LD9__LD9                                  0x0f 0x004
+#define MX27_PAD_LD9__GPIO1_15                             0x0f 0x032
+#define MX27_PAD_LD10__LD10                                0x10 0x004
+#define MX27_PAD_LD10__GPIO1_16                            0x10 0x032
+#define MX27_PAD_LD11__LD11                                0x11 0x004
+#define MX27_PAD_LD11__GPIO1_17                            0x11 0x032
+#define MX27_PAD_LD12__LD12                                0x12 0x004
+#define MX27_PAD_LD12__GPIO1_18                            0x12 0x032
+#define MX27_PAD_LD13__LD13                                0x13 0x004
+#define MX27_PAD_LD13__GPIO1_19                            0x13 0x032
+#define MX27_PAD_LD14__LD14                                0x14 0x004
+#define MX27_PAD_LD14__GPIO1_20                            0x14 0x032
+#define MX27_PAD_LD15__LD15                                0x15 0x004
+#define MX27_PAD_LD15__GPIO1_21                            0x15 0x032
+#define MX27_PAD_LD16__LD16                                0x16 0x004
+#define MX27_PAD_LD16__GPIO1_22                            0x16 0x032
+#define MX27_PAD_LD17__LD17                                0x17 0x004
+#define MX27_PAD_LD17__GPIO1_23                            0x17 0x032
+#define MX27_PAD_REV__REV                                  0x18 0x004
+#define MX27_PAD_REV__GPIO1_24                             0x18 0x032
+#define MX27_PAD_CLS__CLS                                  0x19 0x004
+#define MX27_PAD_CLS__GPIO1_25                             0x19 0x032
+#define MX27_PAD_PS__PS                                    0x1a 0x004
+#define MX27_PAD_PS__GPIO1_26                              0x1a 0x032
+#define MX27_PAD_SPL_SPR__SPL_SPR                          0x1b 0x004
+#define MX27_PAD_SPL_SPR__GPIO1_27                         0x1b 0x032
+#define MX27_PAD_HSYNC__HSYNC                              0x1c 0x004
+#define MX27_PAD_HSYNC__GPIO1_28                           0x1c 0x032
+#define MX27_PAD_VSYNC__VSYNC                              0x1d 0x004
+#define MX27_PAD_VSYNC__GPIO1_29                           0x1d 0x032
+#define MX27_PAD_CONTRAST__CONTRAST                        0x1e 0x004
+#define MX27_PAD_CONTRAST__GPIO1_30                        0x1e 0x032
+#define MX27_PAD_OE_ACD__OE_ACD                            0x1f 0x004
+#define MX27_PAD_OE_ACD__GPIO1_31                          0x1f 0x032
+#define MX27_PAD_SD2_D0__SD2_D0                            0x24 0x004
+#define MX27_PAD_SD2_D0__MSHC_DATA0                        0x24 0x005
+#define MX27_PAD_SD2_D0__GPIO2_4                           0x24 0x032
+#define MX27_PAD_SD2_D1__SD2_D1                            0x25 0x004
+#define MX27_PAD_SD2_D1__MSHC_DATA1                        0x25 0x005
+#define MX27_PAD_SD2_D1__GPIO2_5                           0x25 0x032
+#define MX27_PAD_SD2_D2__SD2_D2                            0x26 0x004
+#define MX27_PAD_SD2_D2__MSHC_DATA2                        0x26 0x005
+#define MX27_PAD_SD2_D2__GPIO2_6                           0x26 0x032
+#define MX27_PAD_SD2_D3__SD2_D3                            0x27 0x004
+#define MX27_PAD_SD2_D3__MSHC_DATA3                        0x27 0x005
+#define MX27_PAD_SD2_D3__GPIO2_7                           0x27 0x032
+#define MX27_PAD_SD2_CMD__SD2_CMD                          0x28 0x004
+#define MX27_PAD_SD2_CMD__MSHC_BS                          0x28 0x005
+#define MX27_PAD_SD2_CMD__GPIO2_8                          0x28 0x032
+#define MX27_PAD_SD2_CLK__SD2_CLK                          0x29 0x004
+#define MX27_PAD_SD2_CLK__MSHC_SCLK                        0x29 0x005
+#define MX27_PAD_SD2_CLK__GPIO2_9                          0x29 0x032
+#define MX27_PAD_CSI_D0__CSI_D0                            0x2a 0x000
+#define MX27_PAD_CSI_D0__UART6_TXD                         0x2a 0x005
+#define MX27_PAD_CSI_D0__GPIO2_10                          0x2a 0x032
+#define MX27_PAD_CSI_D1__CSI_D1                            0x2b 0x000
+#define MX27_PAD_CSI_D1__UART6_RXD                         0x2b 0x001
+#define MX27_PAD_CSI_D1__GPIO2_11                          0x2b 0x032
+#define MX27_PAD_CSI_D2__CSI_D2                            0x2c 0x000
+#define MX27_PAD_CSI_D2__UART6_CTS                         0x2c 0x005
+#define MX27_PAD_CSI_D2__GPIO2_12                          0x2c 0x032
+#define MX27_PAD_CSI_D3__CSI_D3                            0x2d 0x000
+#define MX27_PAD_CSI_D3__UART6_RTS                         0x2d 0x001
+#define MX27_PAD_CSI_D3__GPIO2_13                          0x2d 0x032
+#define MX27_PAD_CSI_D4__CSI_D4                            0x2e 0x000
+#define MX27_PAD_CSI_D4__GPIO2_14                          0x2e 0x032
+#define MX27_PAD_CSI_MCLK__CSI_MCLK                        0x2f 0x004
+#define MX27_PAD_CSI_MCLK__GPIO2_15                        0x2f 0x032
+#define MX27_PAD_CSI_PIXCLK__CSI_PIXCLK                    0x30 0x000
+#define MX27_PAD_CSI_PIXCLK__GPIO2_16                      0x30 0x032
+#define MX27_PAD_CSI_D5__CSI_D5                            0x31 0x000
+#define MX27_PAD_CSI_D5__GPIO2_17                          0x31 0x032
+#define MX27_PAD_CSI_D6__CSI_D6                            0x32 0x000
+#define MX27_PAD_CSI_D6__UART5_TXD                         0x32 0x005
+#define MX27_PAD_CSI_D6__GPIO2_18                          0x32 0x032
+#define MX27_PAD_CSI_D7__CSI_D7                            0x33 0x000
+#define MX27_PAD_CSI_D7__UART5_RXD                         0x33 0x001
+#define MX27_PAD_CSI_D7__GPIO2_19                          0x33 0x032
+#define MX27_PAD_CSI_VSYNC__CSI_VSYNC                      0x34 0x000
+#define MX27_PAD_CSI_VSYNC__UART5_CTS                      0x34 0x005
+#define MX27_PAD_CSI_VSYNC__GPIO2_20                       0x34 0x032
+#define MX27_PAD_CSI_HSYNC__CSI_HSYNC                      0x35 0x000
+#define MX27_PAD_CSI_HSYNC__UART5_RTS                      0x35 0x001
+#define MX27_PAD_CSI_HSYNC__GPIO2_21                       0x35 0x032
+#define MX27_PAD_USBH1_SUSP__USBH1_SUSP                    0x36 0x004
+#define MX27_PAD_USBH1_SUSP__GPIO2_22                      0x36 0x032
+#define MX27_PAD_USB_PWR__USB_PWR                          0x37 0x004
+#define MX27_PAD_USB_PWR__GPIO2_23                         0x37 0x032
+#define MX27_PAD_USB_OC_B__USB_OC_B                        0x38 0x000
+#define MX27_PAD_USB_OC_B__GPIO2_24                        0x38 0x032
+#define MX27_PAD_USBH1_RCV__USBH1_RCV                      0x39 0x004
+#define MX27_PAD_USBH1_RCV__GPIO2_25                       0x39 0x032
+#define MX27_PAD_USBH1_FS__USBH1_FS                        0x3a 0x004
+#define MX27_PAD_USBH1_FS__UART4_RTS                       0x3a 0x001
+#define MX27_PAD_USBH1_FS__GPIO2_26                        0x3a 0x032
+#define MX27_PAD_USBH1_OE_B__USBH1_OE_B                    0x3b 0x004
+#define MX27_PAD_USBH1_OE_B__GPIO2_27                      0x3b 0x032
+#define MX27_PAD_USBH1_TXDM__USBH1_TXDM                    0x3c 0x004
+#define MX27_PAD_USBH1_TXDM__UART4_TXD                     0x3c 0x005
+#define MX27_PAD_USBH1_TXDM__GPIO2_28                      0x3c 0x032
+#define MX27_PAD_USBH1_TXDP__USBH1_TXDP                    0x3d 0x004
+#define MX27_PAD_USBH1_TXDP__UART4_CTS                     0x3d 0x005
+#define MX27_PAD_USBH1_TXDP__GPIO2_29                      0x3d 0x032
+#define MX27_PAD_USBH1_RXDM__USBH1_RXDM                    0x3e 0x004
+#define MX27_PAD_USBH1_RXDM__GPIO2_30                      0x3e 0x032
+#define MX27_PAD_USBH1_RXDP__USBH1_RXDP                    0x3f 0x004
+#define MX27_PAD_USBH1_RXDP__UART4_RXD                     0x3f 0x001
+#define MX27_PAD_USBH1_RXDP__GPIO2_31                      0x3f 0x032
+#define MX27_PAD_I2C2_SDA__I2C2_SDA                        0x45 0x004
+#define MX27_PAD_I2C2_SDA__GPIO3_5                         0x45 0x032
+#define MX27_PAD_I2C2_SCL__I2C2_SCL                        0x46 0x004
+#define MX27_PAD_I2C2_SCL__GPIO3_6                         0x46 0x032
+#define MX27_PAD_USBOTG_DATA5__USBOTG_DATA5                0x47 0x004
+#define MX27_PAD_USBOTG_DATA5__GPIO3_7                     0x47 0x032
+#define MX27_PAD_USBOTG_DATA6__USBOTG_DATA6                0x48 0x004
+#define MX27_PAD_USBOTG_DATA6__GPIO3_8                     0x48 0x032
+#define MX27_PAD_USBOTG_DATA0__USBOTG_DATA0                0x49 0x004
+#define MX27_PAD_USBOTG_DATA0__GPIO3_9                     0x49 0x032
+#define MX27_PAD_USBOTG_DATA2__USBOTG_DATA2                0x4a 0x004
+#define MX27_PAD_USBOTG_DATA2__GPIO3_10                    0x4a 0x032
+#define MX27_PAD_USBOTG_DATA1__USBOTG_DATA1                0x4b 0x004
+#define MX27_PAD_USBOTG_DATA1__GPIO3_11                    0x4b 0x032
+#define MX27_PAD_USBOTG_DATA4__USBOTG_DATA4                0x4c 0x004
+#define MX27_PAD_USBOTG_DATA4__GPIO3_12                    0x4c 0x032
+#define MX27_PAD_USBOTG_DATA3__USBOTG_DATA3                0x4d 0x004
+#define MX27_PAD_USBOTG_DATA3__GPIO3_13                    0x4d 0x032
+#define MX27_PAD_TOUT__TOUT                                0x4e 0x004
+#define MX27_PAD_TOUT__GPIO3_14                            0x4e 0x032
+#define MX27_PAD_TIN__TIN                                  0x4f 0x000
+#define MX27_PAD_TIN__GPIO3_15                             0x4f 0x032
+#define MX27_PAD_SSI4_FS__SSI4_FS                          0x50 0x004
+#define MX27_PAD_SSI4_FS__GPIO3_16                         0x50 0x032
+#define MX27_PAD_SSI4_RXDAT__SSI4_RXDAT                    0x51 0x004
+#define MX27_PAD_SSI4_RXDAT__GPIO3_17                      0x51 0x032
+#define MX27_PAD_SSI4_TXDAT__SSI4_TXDAT                    0x52 0x004
+#define MX27_PAD_SSI4_TXDAT__GPIO3_18                      0x52 0x032
+#define MX27_PAD_SSI4_CLK__SSI4_CLK                        0x53 0x004
+#define MX27_PAD_SSI4_CLK__GPIO3_19                        0x53 0x032
+#define MX27_PAD_SSI1_FS__SSI1_FS                          0x54 0x004
+#define MX27_PAD_SSI1_FS__GPIO3_20                         0x54 0x032
+#define MX27_PAD_SSI1_RXDAT__SSI1_RXDAT                    0x55 0x004
+#define MX27_PAD_SSI1_RXDAT__GPIO3_21                      0x55 0x032
+#define MX27_PAD_SSI1_TXDAT__SSI1_TXDAT                    0x56 0x004
+#define MX27_PAD_SSI1_TXDAT__GPIO3_22                      0x56 0x032
+#define MX27_PAD_SSI1_CLK__SSI1_CLK                        0x57 0x004
+#define MX27_PAD_SSI1_CLK__GPIO3_23                        0x57 0x032
+#define MX27_PAD_SSI2_FS__SSI2_FS                          0x58 0x004
+#define MX27_PAD_SSI2_FS__GPT5_TOUT                        0x58 0x005
+#define MX27_PAD_SSI2_FS__GPIO3_24                         0x58 0x032
+#define MX27_PAD_SSI2_RXDAT__SSI2_RXDAT                    0x59 0x004
+#define MX27_PAD_SSI2_RXDAT__GPTS_TIN                      0x59 0x001
+#define MX27_PAD_SSI2_RXDAT__GPIO3_25                      0x59 0x032
+#define MX27_PAD_SSI2_TXDAT__SSI2_TXDAT                    0x5a 0x004
+#define MX27_PAD_SSI2_TXDAT__GPT4_TOUT                     0x5a 0x005
+#define MX27_PAD_SSI2_TXDAT__GPIO3_26                      0x5a 0x032
+#define MX27_PAD_SSI2_CLK__SSI2_CLK                        0x5b 0x004
+#define MX27_PAD_SSI2_CLK__GPT4_TIN                        0x5b 0x001
+#define MX27_PAD_SSI2_CLK__GPIO3_27                        0x5b 0x032
+#define MX27_PAD_SSI3_FS__SSI3_FS                          0x5c 0x004
+#define MX27_PAD_SSI3_FS__SLCDC2_D0                        0x5c 0x001
+#define MX27_PAD_SSI3_FS__GPIO3_28                         0x5c 0x032
+#define MX27_PAD_SSI3_RXDAT__SSI3_RXDAT                    0x5d 0x004
+#define MX27_PAD_SSI3_RXDAT__SLCDC2_RS                     0x5d 0x001
+#define MX27_PAD_SSI3_RXDAT__GPIO3_29                      0x5d 0x032
+#define MX27_PAD_SSI3_TXDAT__SSI3_TXDAT                    0x5e 0x004
+#define MX27_PAD_SSI3_TXDAT__SLCDC2_CS                     0x5e 0x001
+#define MX27_PAD_SSI3_TXDAT__GPIO3_30                      0x5e 0x032
+#define MX27_PAD_SSI3_CLK__SSI3_CLK                        0x5f 0x004
+#define MX27_PAD_SSI3_CLK__SLCDC2_CLK                      0x5f 0x001
+#define MX27_PAD_SSI3_CLK__GPIO3_31                        0x5f 0x032
+#define MX27_PAD_SD3_CMD__SD3_CMD                          0x60 0x004
+#define MX27_PAD_SD3_CMD__FEC_TXD0                         0x60 0x006
+#define MX27_PAD_SD3_CMD__GPIO4_0                          0x60 0x032
+#define MX27_PAD_SD3_CLK__SD3_CLK                          0x61 0x004
+#define MX27_PAD_SD3_CLK__ETMTRACEPKT15                    0x61 0x005
+#define MX27_PAD_SD3_CLK__FEC_TXD1                         0x61 0x006
+#define MX27_PAD_SD3_CLK__GPIO4_1                          0x61 0x032
+#define MX27_PAD_ATA_DATA0__ATA_DATA0                      0x62 0x004
+#define MX27_PAD_ATA_DATA0__SD3_D0                         0x62 0x005
+#define MX27_PAD_ATA_DATA0__FEC_TXD2                       0x62 0x006
+#define MX27_PAD_ATA_DATA0__GPIO4_2                        0x62 0x032
+#define MX27_PAD_ATA_DATA1__ATA_DATA1                      0x63 0x004
+#define MX27_PAD_ATA_DATA1__SD3_D1                         0x63 0x005
+#define MX27_PAD_ATA_DATA1__FEC_TXD3                       0x63 0x006
+#define MX27_PAD_ATA_DATA1__GPIO4_3                        0x63 0x032
+#define MX27_PAD_ATA_DATA2__ATA_DATA2                      0x64 0x004
+#define MX27_PAD_ATA_DATA2__SD3_D2                         0x64 0x005
+#define MX27_PAD_ATA_DATA2__FEC_RX_ER                      0x64 0x002
+#define MX27_PAD_ATA_DATA2__GPIO4_4                        0x64 0x032
+#define MX27_PAD_ATA_DATA3__ATA_DATA3                      0x65 0x004
+#define MX27_PAD_ATA_DATA3__SD3_D3                         0x65 0x005
+#define MX27_PAD_ATA_DATA3__FEC_RXD1                       0x65 0x002
+#define MX27_PAD_ATA_DATA3__GPIO4_5                        0x65 0x032
+#define MX27_PAD_ATA_DATA4__ATA_DATA4                      0x66 0x004
+#define MX27_PAD_ATA_DATA4__ETMTRACEPKT14                  0x66 0x005
+#define MX27_PAD_ATA_DATA4__FEC_RXD2                       0x66 0x002
+#define MX27_PAD_ATA_DATA4__GPIO4_6                        0x66 0x032
+#define MX27_PAD_ATA_DATA5__ATA_DATA5                      0x67 0x004
+#define MX27_PAD_ATA_DATA5__ETMTRACEPKT13                  0x67 0x005
+#define MX27_PAD_ATA_DATA5__FEC_RXD3                       0x67 0x002
+#define MX27_PAD_ATA_DATA5__GPIO4_7                        0x67 0x032
+#define MX27_PAD_ATA_DATA6__ATA_DATA6                      0x68 0x004
+#define MX27_PAD_ATA_DATA6__FEC_MDIO                       0x68 0x005
+#define MX27_PAD_ATA_DATA6__GPIO4_8                        0x68 0x032
+#define MX27_PAD_ATA_DATA7__ATA_DATA7                      0x69 0x004
+#define MX27_PAD_ATA_DATA7__ETMTRACEPKT12                  0x69 0x005
+#define MX27_PAD_ATA_DATA7__FEC_MDC                        0x69 0x006
+#define MX27_PAD_ATA_DATA7__GPIO4_9                        0x69 0x032
+#define MX27_PAD_ATA_DATA8__ATA_DATA8                      0x6a 0x004
+#define MX27_PAD_ATA_DATA8__ETMTRACEPKT11                  0x6a 0x005
+#define MX27_PAD_ATA_DATA8__FEC_CRS                        0x6a 0x002
+#define MX27_PAD_ATA_DATA8__GPIO4_10                       0x6a 0x032
+#define MX27_PAD_ATA_DATA9__ATA_DATA9                      0x6b 0x004
+#define MX27_PAD_ATA_DATA9__ETMTRACEPKT10                  0x6b 0x005
+#define MX27_PAD_ATA_DATA9__FEC_TX_CLK                     0x6b 0x002
+#define MX27_PAD_ATA_DATA9__GPIO4_11                       0x6b 0x032
+#define MX27_PAD_ATA_DATA10__ATA_DATA10                    0x6c 0x004
+#define MX27_PAD_ATA_DATA10__ETMTRACEPKT9                  0x6c 0x005
+#define MX27_PAD_ATA_DATA10__FEC_RXD0                      0x6c 0x002
+#define MX27_PAD_ATA_DATA10__GPIO4_12                      0x6c 0x032
+#define MX27_PAD_ATA_DATA11__ATA_DATA11                    0x6d 0x004
+#define MX27_PAD_ATA_DATA11__ETMTRACEPKT8                  0x6d 0x005
+#define MX27_PAD_ATA_DATA11__FEC_RX_DV                     0x6d 0x002
+#define MX27_PAD_ATA_DATA11__GPIO4_13                      0x6d 0x032
+#define MX27_PAD_ATA_DATA12__ATA_DATA12                    0x6e 0x004
+#define MX27_PAD_ATA_DATA12__ETMTRACEPKT7                  0x6e 0x005
+#define MX27_PAD_ATA_DATA12__FEC_RX_CLK                    0x6e 0x002
+#define MX27_PAD_ATA_DATA12__GPIO4_14                      0x6e 0x032
+#define MX27_PAD_ATA_DATA13__ATA_DATA13                    0x6f 0x004
+#define MX27_PAD_ATA_DATA13__ETMTRACEPKT6                  0x6f 0x005
+#define MX27_PAD_ATA_DATA13__FEC_COL                       0x6f 0x002
+#define MX27_PAD_ATA_DATA13__GPIO4_15                      0x6f 0x032
+#define MX27_PAD_ATA_DATA14__ATA_DATA14                    0x70 0x004
+#define MX27_PAD_ATA_DATA14__ETMTRACEPKT5                  0x70 0x005
+#define MX27_PAD_ATA_DATA14__FEC_TX_ER                     0x70 0x006
+#define MX27_PAD_ATA_DATA14__GPIO4_16                      0x70 0x032
+#define MX27_PAD_I2C_DATA__I2C_DATA                        0x71 0x004
+#define MX27_PAD_I2C_DATA__GPIO4_17                        0x71 0x032
+#define MX27_PAD_I2C_CLK__I2C_CLK                          0x72 0x004
+#define MX27_PAD_I2C_CLK__GPIO4_18                         0x72 0x032
+#define MX27_PAD_CSPI2_SS2__CSPI2_SS2                      0x73 0x004
+#define MX27_PAD_CSPI2_SS2__USBH2_DATA4                    0x73 0x005
+#define MX27_PAD_CSPI2_SS2__GPIO4_19                       0x73 0x032
+#define MX27_PAD_CSPI2_SS1__CSPI2_SS1                      0x74 0x004
+#define MX27_PAD_CSPI2_SS1__USBH2_DATA3                    0x74 0x005
+#define MX27_PAD_CSPI2_SS1__GPIO4_20                       0x74 0x032
+#define MX27_PAD_CSPI2_SS0__CSPI2_SS0                      0x75 0x004
+#define MX27_PAD_CSPI2_SS0__USBH2_DATA6                    0x75 0x005
+#define MX27_PAD_CSPI2_SS0__GPIO4_21                       0x75 0x032
+#define MX27_PAD_CSPI2_SCLK__CSPI2_SCLK                    0x76 0x004
+#define MX27_PAD_CSPI2_SCLK__USBH2_DATA0                   0x76 0x005
+#define MX27_PAD_CSPI2_SCLK__GPIO4_22                      0x76 0x032
+#define MX27_PAD_CSPI2_MISO__CSPI2_MISO                    0x77 0x004
+#define MX27_PAD_CSPI2_MISO__USBH2_DATA2                   0x77 0x005
+#define MX27_PAD_CSPI2_MISO__GPIO4_23                      0x77 0x032
+#define MX27_PAD_CSPI2_MOSI__CSPI2_MOSI                    0x78 0x004
+#define MX27_PAD_CSPI2_MOSI__USBH2_DATA1                   0x78 0x005
+#define MX27_PAD_CSPI2_MOSI__GPIO4_24                      0x78 0x032
+#define MX27_PAD_CSPI1_RDY__CSPI1_RDY                      0x79 0x000
+#define MX27_PAD_CSPI1_RDY__GPIO4_25                       0x79 0x032
+#define MX27_PAD_CSPI1_SS2__CSPI1_SS2                      0x7a 0x004
+#define MX27_PAD_CSPI1_SS2__USBH2_DATA5                    0x7a 0x005
+#define MX27_PAD_CSPI1_SS2__GPIO4_26                       0x7a 0x032
+#define MX27_PAD_CSPI1_SS1__CSPI1_SS1                      0x7b 0x004
+#define MX27_PAD_CSPI1_SS1__GPIO4_27                       0x7b 0x032
+#define MX27_PAD_CSPI1_SS0__CSPI1_SS0                      0x7c 0x004
+#define MX27_PAD_CSPI1_SS0__GPIO4_28                       0x7c 0x032
+#define MX27_PAD_CSPI1_SCLK__CSPI1_SCLK                    0x7d 0x004
+#define MX27_PAD_CSPI1_SCLK__GPIO4_29                      0x7d 0x032
+#define MX27_PAD_CSPI1_MISO__CSPI1_MISO                    0x7e 0x004
+#define MX27_PAD_CSPI1_MISO__GPIO4_30                      0x7e 0x032
+#define MX27_PAD_CSPI1_MOSI__CSPI1_MOSI                    0x7f 0x004
+#define MX27_PAD_CSPI1_MOSI__GPIO4_31                      0x7f 0x032
+#define MX27_PAD_USBOTG_NXT__USBOTG_NXT                    0x80 0x000
+#define MX27_PAD_USBOTG_NXT__KP_COL6A                      0x80 0x005
+#define MX27_PAD_USBOTG_NXT__GPIO5_0                       0x80 0x032
+#define MX27_PAD_USBOTG_STP__USBOTG_STP                    0x81 0x004
+#define MX27_PAD_USBOTG_STP__KP_ROW6A                      0x81 0x005
+#define MX27_PAD_USBOTG_STP__GPIO5_1                       0x81 0x032
+#define MX27_PAD_USBOTG_DIR__USBOTG_DIR                    0x82 0x000
+#define MX27_PAD_USBOTG_DIR__KP_ROW7A                      0x82 0x005
+#define MX27_PAD_USBOTG_DIR__GPIO5_2                       0x82 0x032
+#define MX27_PAD_UART2_CTS__UART2_CTS                      0x83 0x004
+#define MX27_PAD_UART2_CTS__KP_COL7                        0x83 0x005
+#define MX27_PAD_UART2_CTS__GPIO5_3                        0x83 0x032
+#define MX27_PAD_UART2_RTS__UART2_RTS                      0x84 0x000
+#define MX27_PAD_UART2_RTS__KP_ROW7                        0x84 0x005
+#define MX27_PAD_UART2_RTS__GPIO5_4                        0x84 0x032
+#define MX27_PAD_PWMO__PWMO                                0x85 0x004
+#define MX27_PAD_PWMO__GPIO5_5                             0x85 0x032
+#define MX27_PAD_UART2_TXD__UART2_TXD                      0x86 0x004
+#define MX27_PAD_UART2_TXD__KP_COL6                        0x86 0x005
+#define MX27_PAD_UART2_TXD__GPIO5_6                        0x86 0x032
+#define MX27_PAD_UART2_RXD__UART2_RXD                      0x87 0x000
+#define MX27_PAD_UART2_RXD__KP_ROW6                        0x87 0x005
+#define MX27_PAD_UART2_RXD__GPIO5_7                        0x87 0x032
+#define MX27_PAD_UART3_TXD__UART3_TXD                      0x88 0x004
+#define MX27_PAD_UART3_TXD__GPIO5_8                        0x88 0x032
+#define MX27_PAD_UART3_RXD__UART3_RXD                      0x89 0x000
+#define MX27_PAD_UART3_RXD__GPIO5_9                        0x89 0x032
+#define MX27_PAD_UART3_CTS__UART3_CTS                      0x8a 0x004
+#define MX27_PAD_UART3_CTS__GPIO5_10                       0x8a 0x032
+#define MX27_PAD_UART3_RTS__UART3_RTS                      0x8b 0x000
+#define MX27_PAD_UART3_RTS__GPIO5_11                       0x8b 0x032
+#define MX27_PAD_UART1_TXD__UART1_TXD                      0x8c 0x004
+#define MX27_PAD_UART1_TXD__GPIO5_12                       0x8c 0x032
+#define MX27_PAD_UART1_RXD__UART1_RXD                      0x8d 0x000
+#define MX27_PAD_UART1_RXD__GPIO5_13                       0x8d 0x032
+#define MX27_PAD_UART1_CTS__UART1_CTS                      0x8e 0x004
+#define MX27_PAD_UART1_CTS__GPIO5_14                       0x8e 0x032
+#define MX27_PAD_UART1_RTS__UART1_RTS                      0x8f 0x000
+#define MX27_PAD_UART1_RTS__GPIO5_15                       0x8f 0x032
+#define MX27_PAD_RTCK__RTCK                                0x90 0x004
+#define MX27_PAD_RTCK__OWIRE                               0x90 0x005
+#define MX27_PAD_RTCK__GPIO5_16                            0x90 0x032
+#define MX27_PAD_RESET_OUT_B__RESET_OUT_B                  0x91 0x004
+#define MX27_PAD_RESET_OUT_B__GPIO5_17                     0x91 0x032
+#define MX27_PAD_SD1_D0__SD1_D0                            0x92 0x004
+#define MX27_PAD_SD1_D0__CSPI3_MISO                        0x92 0x001
+#define MX27_PAD_SD1_D0__GPIO5_18                          0x92 0x032
+#define MX27_PAD_SD1_D1__SD1_D1                            0x93 0x004
+#define MX27_PAD_SD1_D1__GPIO5_19                          0x93 0x032
+#define MX27_PAD_SD1_D2__SD1_D2                            0x94 0x004
+#define MX27_PAD_SD1_D2__GPIO5_20                          0x94 0x032
+#define MX27_PAD_SD1_D3__SD1_D3                            0x95 0x004
+#define MX27_PAD_SD1_D3__CSPI3_SS                          0x95 0x005
+#define MX27_PAD_SD1_D3__GPIO5_21                          0x95 0x032
+#define MX27_PAD_SD1_CMD__SD1_CMD                          0x96 0x004
+#define MX27_PAD_SD1_CMD__CSPI3_MOSI                       0x96 0x005
+#define MX27_PAD_SD1_CMD__GPIO5_22                         0x96 0x032
+#define MX27_PAD_SD1_CLK__SD1_CLK                          0x97 0x004
+#define MX27_PAD_SD1_CLK__CSPI3_SCLK                       0x97 0x005
+#define MX27_PAD_SD1_CLK__GPIO5_23                         0x97 0x032
+#define MX27_PAD_USBOTG_CLK__USBOTG_CLK                    0x98 0x000
+#define MX27_PAD_USBOTG_CLK__GPIO5_24                      0x98 0x032
+#define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7                0x99 0x004
+#define MX27_PAD_USBOTG_DATA7__GPIO5_25                    0x99 0x032
+#define MX27_PAD_NFRB__NFRB                                0xa0 0x000
+#define MX27_PAD_NFRB__ETMTRACEPKT3                        0xa0 0x005
+#define MX27_PAD_NFRB__GPIO6_0                             0xa0 0x032
+#define MX27_PAD_NFCLE__NFCLE                              0xa1 0x004
+#define MX27_PAD_NFCLE__ETMTRACEPKT0                       0xa1 0x005
+#define MX27_PAD_NFCLE__GPIO6_1                            0xa1 0x032
+#define MX27_PAD_NFWP_B__NFWP_B                            0xa2 0x004
+#define MX27_PAD_NFWP_B__ETMTRACEPKT1                      0xa2 0x005
+#define MX27_PAD_NFWP_B__GPIO6_2                           0xa2 0x032
+#define MX27_PAD_NFCE_B__NFCE_B                            0xa3 0x004
+#define MX27_PAD_NFCE_B__ETMTRACEPKT2                      0xa3 0x005
+#define MX27_PAD_NFCE_B__GPIO6_3                           0xa3 0x032
+#define MX27_PAD_NFALE__NFALE                              0xa4 0x004
+#define MX27_PAD_NFALE__ETMPIPESTAT0                       0xa4 0x005
+#define MX27_PAD_NFALE__GPIO6_4                            0xa4 0x032
+#define MX27_PAD_NFRE_B__NFRE_B                            0xa5 0x004
+#define MX27_PAD_NFRE_B__ETMPIPESTAT1                      0xa5 0x005
+#define MX27_PAD_NFRE_B__GPIO6_5                           0xa5 0x032
+#define MX27_PAD_NFWE_B__NFWE_B                            0xa6 0x004
+#define MX27_PAD_NFWE_B__ETMPIPESTAT2                      0xa6 0x005
+#define MX27_PAD_NFWE_B__GPIO6_6                           0xa6 0x032
+#define MX27_PAD_PC_POE__PC_POE                            0xa7 0x004
+#define MX27_PAD_PC_POE__ATA_BUFFER_EN                     0xa7 0x005
+#define MX27_PAD_PC_POE__GPIO6_7                           0xa7 0x032
+#define MX27_PAD_PC_RW_B__PC_RW_B                          0xa8 0x004
+#define MX27_PAD_PC_RW_B__ATA_IORDY                        0xa8 0x001
+#define MX27_PAD_PC_RW_B__GPIO6_8                          0xa8 0x032
+#define MX27_PAD_IOIS16__IOIS16                            0xa9 0x000
+#define MX27_PAD_IOIS16__ATA_INTRQ                         0xa9 0x001
+#define MX27_PAD_IOIS16__GPIO6_9                           0xa9 0x032
+#define MX27_PAD_PC_RST__PC_RST                            0xaa 0x004
+#define MX27_PAD_PC_RST__ATA_RESET_B                       0xaa 0x005
+#define MX27_PAD_PC_RST__GPIO6_10                          0xaa 0x032
+#define MX27_PAD_PC_BVD2__PC_BVD2                          0xab 0x000
+#define MX27_PAD_PC_BVD2__ATA_DMACK                        0xab 0x005
+#define MX27_PAD_PC_BVD2__GPIO6_11                         0xab 0x032
+#define MX27_PAD_PC_BVD1__PC_BVD1                          0xac 0x000
+#define MX27_PAD_PC_BVD1__ATA_DMARQ                        0xac 0x001
+#define MX27_PAD_PC_BVD1__GPIO6_12                         0xac 0x032
+#define MX27_PAD_PC_VS2__PC_VS2                            0xad 0x000
+#define MX27_PAD_PC_VS2__ATA_DA0                           0xad 0x005
+#define MX27_PAD_PC_VS2__GPIO6_13                          0xad 0x032
+#define MX27_PAD_PC_VS1__PC_VS1                            0xae 0x000
+#define MX27_PAD_PC_VS1__ATA_DA1                           0xae 0x005
+#define MX27_PAD_PC_VS1__GPIO6_14                          0xae 0x032
+#define MX27_PAD_CLKO__CLKO                                0xaf 0x004
+#define MX27_PAD_CLKO__GPIO6_15                            0xaf 0x032
+#define MX27_PAD_PC_PWRON__PC_PWRON                        0xb0 0x000
+#define MX27_PAD_PC_PWRON__ATA_DA2                         0xb0 0x005
+#define MX27_PAD_PC_PWRON__GPIO6_16                        0xb0 0x032
+#define MX27_PAD_PC_READY__PC_READY                        0xb1 0x000
+#define MX27_PAD_PC_READY__ATA_CS0                         0xb1 0x005
+#define MX27_PAD_PC_READY__GPIO6_17                        0xb1 0x032
+#define MX27_PAD_PC_WAIT_B__PC_WAIT_B                      0xb2 0x000
+#define MX27_PAD_PC_WAIT_B__ATA_CS1                        0xb2 0x005
+#define MX27_PAD_PC_WAIT_B__GPIO6_18                       0xb2 0x032
+#define MX27_PAD_PC_CD2_B__PC_CD2_B                        0xb3 0x000
+#define MX27_PAD_PC_CD2_B__ATA_DIOW                        0xb3 0x005
+#define MX27_PAD_PC_CD2_B__GPIO6_19                        0xb3 0x032
+#define MX27_PAD_PC_CD1_B__PC_CD1_B                        0xb4 0x000
+#define MX27_PAD_PC_CD1_B__ATA_DIOR                        0xb4 0x005
+#define MX27_PAD_PC_CD1_B__GPIO6_20                        0xb4 0x032
+#define MX27_PAD_CS4_B__CS4_B                              0xb5 0x004
+#define MX27_PAD_CS4_B__ETMTRACESYNC                       0xb5 0x005
+#define MX27_PAD_CS4_B__GPIO6_21                           0xb5 0x032
+#define MX27_PAD_CS5_B__CS5_B                              0xb6 0x004
+#define MX27_PAD_CS5_B__ETMTRACECLK                        0xb6 0x005
+#define MX27_PAD_CS5_B__GPIO6_22                           0xb6 0x032
+#define MX27_PAD_ATA_DATA15__ATA_DATA15                    0xb7 0x004
+#define MX27_PAD_ATA_DATA15__ETMTRACEPKT4                  0xb7 0x005
+#define MX27_PAD_ATA_DATA15__FEC_TX_EN                     0xb7 0x006
+#define MX27_PAD_ATA_DATA15__GPIO6_23                      0xb7 0x032
+
+#endif /* __DTS_IMX27_PINFUNC_H */
diff --git a/src/arm/imx27.dtsi b/src/arm/imx27.dtsi
new file mode 100644
index 000000000000..4b063b68db44
--- /dev/null
+++ b/src/arm/imx27.dtsi
@@ -0,0 +1,575 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx27-pinfunc.h"
+
+#include <dt-bindings/clock/imx27-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		spi0 = &cspi1;
+		spi1 = &cspi2;
+		spi2 = &cspi3;
+	};
+
+	aitc: aitc-interrupt-controller@e0000000 {
+		compatible = "fsl,imx27-aitc", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x10040000 0x1000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc26m {
+			compatible = "fsl,imx-osc26m", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		cpu: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			operating-points = <
+				/* kHz uV */
+				266000 1300000
+				399000 1450000
+			>;
+			clock-latency = <62500>;
+			clocks = <&clks IMX27_CLK_CPU_DIV>;
+			voltage-tolerance = <5>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&aitc>;
+		ranges;
+
+		aipi@10000000 { /* AIPI1 */
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10000000 0x20000>;
+			ranges;
+
+			dma: dma@10001000 {
+				compatible = "fsl,imx27-dma";
+				reg = <0x10001000 0x1000>;
+				interrupts = <32>;
+				clocks = <&clks IMX27_CLK_DMA_IPG_GATE>,
+					 <&clks IMX27_CLK_DMA_AHB_GATE>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <1>;
+				#dma-channels = <16>;
+			};
+
+			wdog: wdog@10002000 {
+				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
+				reg = <0x10002000 0x1000>;
+				interrupts = <27>;
+				clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>;
+			};
+
+			gpt1: timer@10003000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				reg = <0x10003000 0x1000>;
+				interrupts = <26>;
+				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: timer@10004000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				reg = <0x10004000 0x1000>;
+				interrupts = <25>;
+				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt3: timer@10005000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				reg = <0x10005000 0x1000>;
+				interrupts = <24>;
+				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			pwm: pwm@10006000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx27-pwm";
+				reg = <0x10006000 0x1000>;
+				interrupts = <23>;
+				clocks = <&clks IMX27_CLK_PWM_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			kpp: kpp@10008000 {
+				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
+				reg = <0x10008000 0x1000>;
+				interrupts = <21>;
+				clocks = <&clks IMX27_CLK_KPP_IPG_GATE>;
+				status = "disabled";
+			};
+
+			owire: owire@10009000 {
+				compatible = "fsl,imx27-owire", "fsl,imx21-owire";
+				reg = <0x10009000 0x1000>;
+				clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>;
+				status = "disabled";
+			};
+
+			uart1: serial@1000a000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000a000 0x1000>;
+				interrupts = <20>;
+				clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@1000b000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000b000 0x1000>;
+				interrupts = <19>;
+				clocks = <&clks IMX27_CLK_UART2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@1000c000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000c000 0x1000>;
+				interrupts = <18>;
+				clocks = <&clks IMX27_CLK_UART3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@1000d000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1000d000 0x1000>;
+				interrupts = <17>;
+				clocks = <&clks IMX27_CLK_UART4_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			cspi1: cspi@1000e000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-cspi";
+				reg = <0x1000e000 0x1000>;
+				interrupts = <16>;
+				clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			cspi2: cspi@1000f000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-cspi";
+				reg = <0x1000f000 0x1000>;
+				interrupts = <15>;
+				clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			ssi1: ssi@10010000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+				reg = <0x10010000 0x1000>;
+				interrupts = <14>;
+				clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>;
+				dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
+				dma-names = "rx0", "tx0", "rx1", "tx1";
+				fsl,fifo-depth = <8>;
+				status = "disabled";
+			};
+
+			ssi2: ssi@10011000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
+				reg = <0x10011000 0x1000>;
+				interrupts = <13>;
+				clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>;
+				dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
+				dma-names = "rx0", "tx0", "rx1", "tx1";
+				fsl,fifo-depth = <8>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@10012000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
+				reg = <0x10012000 0x1000>;
+				interrupts = <12>;
+				clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>;
+				status = "disabled";
+			};
+
+			sdhci1: sdhci@10013000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x10013000 0x1000>;
+				interrupts = <11>;
+				clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 7>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			sdhci2: sdhci@10014000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x10014000 0x1000>;
+				interrupts = <10>;
+				clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 6>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@10015000 {
+				compatible = "fsl,imx27-iomuxc";
+				reg = <0x10015000 0x600>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				gpio1: gpio@10015000 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015000 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@10015100 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015100 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@10015200 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015200 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@10015300 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015300 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio5: gpio@10015400 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015400 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio6: gpio@10015500 {
+					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
+					reg = <0x10015500 0x100>;
+					clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>;
+					interrupts = <8>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+			};
+
+			audmux: audmux@10016000 {
+				compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
+				reg = <0x10016000 0x1000>;
+				clocks = <&clks IMX27_CLK_DUMMY>;
+				clock-names = "audmux";
+				status = "disabled";
+			};
+
+			cspi3: cspi@10017000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-cspi";
+				reg = <0x10017000 0x1000>;
+				interrupts = <6>;
+				clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt4: timer@10019000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				reg = <0x10019000 0x1000>;
+				interrupts = <4>;
+				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt5: timer@1001a000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				reg = <0x1001a000 0x1000>;
+				interrupts = <3>;
+				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			uart5: serial@1001b000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1001b000 0x1000>;
+				interrupts = <49>;
+				clocks = <&clks IMX27_CLK_UART5_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@1001c000 {
+				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+				reg = <0x1001c000 0x1000>;
+				interrupts = <48>;
+				clocks = <&clks IMX27_CLK_UART6_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@1001d000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
+				reg = <0x1001d000 0x1000>;
+				interrupts = <1>;
+				clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>;
+				status = "disabled";
+			};
+
+			sdhci3: sdhci@1001e000 {
+				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
+				reg = <0x1001e000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>,
+					 <&clks IMX27_CLK_PER2_GATE>;
+				clock-names = "ipg", "per";
+				dmas = <&dma 36>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			gpt6: timer@1001f000 {
+				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				reg = <0x1001f000 0x1000>;
+				interrupts = <2>;
+				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
+					 <&clks IMX27_CLK_PER1_GATE>;
+				clock-names = "ipg", "per";
+			};
+		};
+
+		aipi@10020000 { /* AIPI2 */
+			compatible = "fsl,aipi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10020000 0x20000>;
+			ranges;
+
+			fb: fb@10021000 {
+				compatible = "fsl,imx27-fb", "fsl,imx21-fb";
+				interrupts = <61>;
+				reg = <0x10021000 0x1000>;
+				clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>,
+					 <&clks IMX27_CLK_LCDC_AHB_GATE>,
+					 <&clks IMX27_CLK_PER3_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			coda: coda@10023000 {
+				compatible = "fsl,imx27-vpu", "cnm,codadx6";
+				reg = <0x10023000 0x0200>;
+				interrupts = <53>;
+				clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>,
+					 <&clks IMX27_CLK_VPU_AHB_GATE>;
+				clock-names = "per", "ahb";
+				iram = <&iram>;
+			};
+
+			usbotg: usb@10024000 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024000 0x200>;
+				interrupts = <56>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				fsl,usbmisc = <&usbmisc 0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@10024200 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024200 0x200>;
+				interrupts = <54>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				fsl,usbmisc = <&usbmisc 1>;
+				status = "disabled";
+			};
+
+			usbh2: usb@10024400 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024400 0x200>;
+				interrupts = <55>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				fsl,usbmisc = <&usbmisc 2>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@10024600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx27-usbmisc";
+				reg = <0x10024600 0x200>;
+				clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
+			};
+
+			sahara2: sahara@10025000 {
+				compatible = "fsl,imx27-sahara";
+				reg = <0x10025000 0x1000>;
+				interrupts = <59>;
+				clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX27_CLK_SAHARA_AHB_GATE>;
+				clock-names = "ipg", "ahb";
+			};
+
+			clks: ccm@10027000{
+				compatible = "fsl,imx27-ccm";
+				reg = <0x10027000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			iim: iim@10028000 {
+				compatible = "fsl,imx27-iim";
+				reg = <0x10028000 0x1000>;
+				interrupts = <62>;
+				clocks = <&clks IMX27_CLK_IIM_IPG_GATE>;
+			};
+
+			fec: ethernet@1002b000 {
+				compatible = "fsl,imx27-fec";
+				reg = <0x1002b000 0x4000>;
+				interrupts = <50>;
+				clocks = <&clks IMX27_CLK_FEC_IPG_GATE>,
+					 <&clks IMX27_CLK_FEC_AHB_GATE>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+		};
+
+		nfc: nand@d8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,imx27-nand";
+			reg = <0xd8000000 0x1000>;
+			interrupts = <29>;
+			clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>;
+			status = "disabled";
+		};
+
+		weim: weim@d8002000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "fsl,imx27-weim";
+			reg = <0xd8002000 0x1000>;
+			clocks = <&clks IMX27_CLK_EMI_AHB_GATE>;
+			ranges = <
+				0 0 0xc0000000 0x08000000
+				1 0 0xc8000000 0x08000000
+				2 0 0xd0000000 0x02000000
+				3 0 0xd2000000 0x02000000
+				4 0 0xd4000000 0x02000000
+				5 0 0xd6000000 0x02000000
+			>;
+			status = "disabled";
+		};
+
+		iram: iram@ffff4c00 {
+			compatible = "mmio-sram";
+			reg = <0xffff4c00 0xb400>;
+		};
+	};
+};
diff --git a/src/arm/imx28-apf28.dts b/src/arm/imx28-apf28.dts
new file mode 100644
index 000000000000..7198fe3798c6
--- /dev/null
+++ b/src/arm/imx28-apf28.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Armadeus Systems APF28 module";
+	compatible = "armadeus,imx28-apf28", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x300000>;
+				};
+
+				partition@300000 {
+					label = "env";
+					reg = <0x300000 0x80000>;
+				};
+
+				partition@380000 {
+					label = "env2";
+					reg = <0x380000 0x80000>;
+				};
+
+				partition@400000 {
+					label = "dtb";
+					reg = <0x400000 0x80000>;
+				};
+
+				partition@480000 {
+					label = "splash";
+					reg = <0x480000 0x80000>;
+				};
+
+				partition@500000 {
+					label = "kernel";
+					reg = <0x500000 0x800000>;
+				};
+
+				partition@d00000 {
+					label = "rootfs";
+					reg = <0xd00000 0xf300000>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio4 13 0>;
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/imx28-apf28dev.dts b/src/arm/imx28-apf28dev.dts
new file mode 100644
index 000000000000..1f38a052ad4b
--- /dev/null
+++ b/src/arm/imx28-apf28dev.dts
@@ -0,0 +1,207 @@
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/* APF28Dev is a docking board for the APF28 SOM */
+#include "imx28-apf28.dts"
+
+/ {
+	model = "Armadeus Systems APF28Dev docking/development board";
+	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_apf28dev>;
+
+				hog_pins_apf28dev: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D16__GPIO_1_16
+						MX28_PAD_LCD_D17__GPIO_1_17
+						MX28_PAD_LCD_D18__GPIO_1_18
+						MX28_PAD_LCD_D19__GPIO_1_19
+						MX28_PAD_LCD_D20__GPIO_1_20
+						MX28_PAD_LCD_D21__GPIO_1_21
+						MX28_PAD_LCD_D22__GPIO_1_22
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_otg_apf28dev: otg-apf28dev@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D23__GPIO_1_23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_16bit_pins_a
+						&lcdif_pins_apf28dev>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <16>;
+					bus-width = <16>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <33000033>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <96>;
+							hfront-porch = <96>;
+							vback-porch = <20>;
+							vfront-porch = <21>;
+							hsync-len = <64>;
+							vsync-len = <4>;
+							hsync-active = <1>;
+							vsync-active = <1>;
+							de-active = <1>;
+							pixelclk-active = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_otg_apf28dev>;
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			phy-reset-gpios = <&gpio0 23 0>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 23 1>;
+			enable-active-high;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio0 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm 3 191000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio0 17 0>;
+			linux,code = <0x100>;
+		};
+	};
+};
diff --git a/src/arm/imx28-apx4devkit.dts b/src/arm/imx28-apx4devkit.dts
new file mode 100644
index 000000000000..1092b761d7ac
--- /dev/null
+++ b/src/arm/imx28-apx4devkit.dts
@@ -0,0 +1,226 @@
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Bluegiga APX4 Development Kit";
+	compatible = "bluegiga,apx4devkit", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_RDY1__GPIO_0_21
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_JTAG_RTCK__GPIO_4_20
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_apx4: lcdif-apx4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_apx4>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <30000000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <88>;
+							hfront-porch = <40>;
+							vback-porch = <32>;
+							vfront-porch = <13>;
+							hsync-len = <48>;
+							vsync-len = <3>;
+							hsync-active = <1>;
+							vsync-active = <1>;
+							de-active = <1>;
+							pixelclk-active = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			saif0: saif@80042000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif0_pins_a>;
+				status = "okay";
+			};
+
+			saif1: saif@80046000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif1_pins_a>;
+				fsl,saif-master = <&saif0>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				sgtl5000: codec@0a {
+					compatible = "fsl,sgtl5000";
+					reg = <0x0a>;
+					VDDA-supply = <&reg_3p3v>;
+					VDDIO-supply = <&reg_3p3v>;
+					clocks = <&saif0>;
+				};
+
+				pcf8563: rtc@51 {
+					compatible = "phg,pcf8563";
+					reg = <0x51>;
+				};
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_2pins_a>;
+				status = "okay";
+			};
+
+			auart2: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart2_2pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "bluegiga,apx4devkit-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "apx4devkit-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 28 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/src/arm/imx28-cfa10036.dts b/src/arm/imx28-cfa10036.dts
new file mode 100644
index 000000000000..b04b6b8850a7
--- /dev/null
+++ b/src/arm/imx28-cfa10036.dts
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Crystalfontz CFA-10036 Board";
+	compatible = "crystalfontz,cfa10036", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				ssd1306_cfa10036: ssd1306-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__GPIO_2_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins_cfa10036: leds-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__GPIO_3_4
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_otg_cfa10036: otg-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY0__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31c3 /*
+						MX28_PAD_PWM3__GPIO_3_28 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				bus-width = <4>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_b>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_b>;
+				clock-frequency = <400000>;
+				status = "okay";
+
+				ssd1306: oled@3c {
+					compatible = "solomon,ssd1306fb-i2c";
+					pinctrl-names = "default";
+					pinctrl-0 = <&ssd1306_cfa10036>;
+					reg = <0x3c>;
+					reset-gpios = <&gpio2 7 0>;
+					solomon,height = <32>;
+					solomon,width = <128>;
+					solomon,page-offset = <0>;
+				};
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_otg_cfa10036>;
+			dr_mode = "peripheral";
+			phy_type = "utmi";
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cfa10036>;
+
+		power {
+			gpios = <&gpio3 4 1>;
+			default-state = "on";
+		};
+	};
+
+	reg_vddio_sd0: vddio-sd0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc_pwr_cfa10036>;
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
+};
diff --git a/src/arm/imx28-cfa10037.dts b/src/arm/imx28-cfa10037.dts
new file mode 100644
index 000000000000..e5beaa58bb40
--- /dev/null
+++ b/src/arm/imx28-cfa10037.dts
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10037 Board";
+	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				usb_pins_cfa10037: usb-10037@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_cfa10037: mac0-10037@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__GPIO_2_21
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usb1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a
+				&mac0_pins_cfa10037>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10037>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+};
diff --git a/src/arm/imx28-cfa10049.dts b/src/arm/imx28-cfa10049.dts
new file mode 100644
index 000000000000..ef944b6d4f01
--- /dev/null
+++ b/src/arm/imx28-cfa10049.dts
@@ -0,0 +1,436 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10049 Board";
+	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				usb_pins_cfa10049: usb-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				i2cmux_pins_cfa10049: i2cmux-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D22__GPIO_1_22
+						MX28_PAD_LCD_D23__GPIO_1_23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_cfa10049: mac0-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__GPIO_2_21
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pca_pins_cfa10049: pca-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS0__GPIO_2_19
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				rotary_pins_cfa10049: rotary-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_I2C0_SCL__GPIO_3_24
+						MX28_PAD_I2C0_SDA__GPIO_3_25
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				spi2_pins_cfa10049: spi2-cfa10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				spi3_pins_cfa10049: spi3-cfa10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDN__GPIO_0_24
+						MX28_PAD_GPMI_RESETN__GPIO_0_28
+						MX28_PAD_GPMI_CE1N__GPIO_0_17
+						MX28_PAD_GPMI_ALE__GPIO_0_26
+						MX28_PAD_GPMI_CLE__GPIO_0_27
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10049: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RESET__GPIO_3_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				w1_gpio_pins: w1-gpio@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D21__GPIO_1_21
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
+					     &lcdif_pins_cfa10049
+					     &lcdif_pins_cfa10049_pullup>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <9216000>;
+							hactive = <320>;
+							vactive = <480>;
+							hback-porch = <2>;
+							hfront-porch = <2>;
+							vback-porch = <2>;
+							vfront-porch = <2>;
+							hsync-len = <15>;
+							vsync-len = <15>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+
+			i2c1: i2c@8005a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c1_pins_a>;
+				status = "okay";
+			};
+
+			i2cmux {
+				compatible = "i2c-mux-gpio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2cmux_pins_cfa10049>;
+				mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
+				i2c-parent = <&i2c1>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					adc0: nau7802@2a {
+						compatible = "nuvoton,nau7802";
+						reg = <0x2a>;
+						nuvoton,vldo = <3000>;
+					};
+				};
+
+				i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					adc1: nau7802@2a {
+						compatible = "nuvoton,nau7802";
+						reg = <0x2a>;
+						nuvoton,vldo = <3000>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					adc2: nau7802@2a {
+						compatible = "nuvoton,nau7802";
+						reg = <0x2a>;
+						nuvoton,vldo = <3000>;
+					};
+				};
+
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pca9555: pca9555@20 {
+						compatible = "nxp,pca9555";
+						pinctrl-names = "default";
+						pinctrl-0 = <&pca_pins_cfa10049>;
+						interrupt-parent = <&gpio2>;
+						interrupts = <19 0x2>;
+						gpio-controller;
+						#gpio-cells = <2>;
+						interrupt-controller;
+						#interrupt-cells = <2>;
+						reg = <0x20>;
+					};
+				};
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usb1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10049>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a
+				&mac0_pins_cfa10049>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	spi2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10049>;
+		status = "okay";
+		gpio-sck = <&gpio2 16 0>;
+		gpio-mosi = <&gpio2 17 0>;
+		gpio-miso = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
+		};
+	};
+
+	spi3 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi3_pins_cfa10049>;
+		status = "okay";
+		gpio-sck = <&gpio0 24 0>;
+		gpio-mosi = <&gpio0 28 0>;
+		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
+		num-chipselects = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio5: gpio5@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <2>;
+			spi-max-frequency = <100000>;
+		};
+
+		gpio6: gpio6@1 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <1>;
+			registers-number = <4>;
+			spi-max-frequency = <100000>;
+		};
+
+		dac0: dh2228@2 {
+			compatible = "rohm,dh2228fv";
+			reg = <2>;
+			spi-max-frequency = <100000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rotary_button {
+			label = "rotary_button";
+			gpios = <&gpio3 26 1>;
+			debounce-interval = <10>;
+			linux,code = <28>;
+		};
+	};
+
+	rotary {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rotary_pins_cfa10049>;
+		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
+		linux,axis = <1>; /* REL_Y */
+		rotary-encoder,relative-axis;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+	};
+
+	onewire@0 {
+		compatible = "w1-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&w1_gpio_pins>;
+		status = "okay";
+		gpios = <&gpio1 21 0>;
+	};
+};
diff --git a/src/arm/imx28-cfa10055.dts b/src/arm/imx28-cfa10055.dts
new file mode 100644
index 000000000000..6a34114bec29
--- /dev/null
+++ b/src/arm/imx28-cfa10055.dts
@@ -0,0 +1,167 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * 				  Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10055 Board";
+	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				spi2_pins_cfa10055: spi2-cfa10055@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10055: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RESET__GPIO_3_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+					     &lcdif_pins_cfa10055
+					     &lcdif_pins_cfa10055_pullup>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <9216000>;
+							hactive = <320>;
+							vactive = <480>;
+							hback-porch = <2>;
+							hfront-porch = <2>;
+							vback-porch = <2>;
+							vfront-porch = <2>;
+							hsync-len = <15>;
+							vsync-len = <15>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+		};
+	};
+
+	spi2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10055>;
+		status = "okay";
+		gpio-sck = <&gpio2 16 0>;
+		gpio-mosi = <&gpio2 17 0>;
+		gpio-miso = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/src/arm/imx28-cfa10056.dts b/src/arm/imx28-cfa10056.dts
new file mode 100644
index 000000000000..ba6495ca44d2
--- /dev/null
+++ b/src/arm/imx28-cfa10056.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+#include "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10056 Board";
+	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				spi2_pins_cfa10056: spi2-cfa10056@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__GPIO_2_16
+						MX28_PAD_SSP2_MOSI__GPIO_2_17
+						MX28_PAD_SSP2_MISO__GPIO_2_18
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				lcdif_pins_cfa10056: lcdif-10056@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RESET__GPIO_3_30
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+						&lcdif_pins_cfa10056
+						&lcdif_pins_cfa10056_pullup >;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <32000000>;
+							hactive = <480>;
+							vactive = <800>;
+							hback-porch = <2>;
+							hfront-porch = <2>;
+							vback-porch = <2>;
+							vfront-porch = <2>;
+							hsync-len = <5>;
+							vsync-len = <5>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	spi2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10056>;
+		status = "okay";
+		gpio-sck = <&gpio2 16 0>;
+		gpio-mosi = <&gpio2 17 0>;
+		gpio-miso = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8369: hx8369@0 {
+			compatible = "himax,hx8369a", "himax,hx8369";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+};
diff --git a/src/arm/imx28-cfa10057.dts b/src/arm/imx28-cfa10057.dts
new file mode 100644
index 000000000000..5df0b24eaf59
--- /dev/null
+++ b/src/arm/imx28-cfa10057.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10057 Board";
+	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				usb_pins_cfa10057: usb-10057@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10057: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+					     &lcdif_pins_cfa10057>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <30000000>;
+							hactive = <480>;
+							vactive = <800>;
+							hfront-porch = <12>;
+							hback-porch = <2>;
+							vfront-porch = <5>;
+							vback-porch = <3>;
+							hsync-len = <2>;
+							vsync-len = <2>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+
+			i2c1: i2c@8005a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c1_pins_a>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usb1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10057>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+};
diff --git a/src/arm/imx28-cfa10058.dts b/src/arm/imx28-cfa10058.dts
new file mode 100644
index 000000000000..f5c6dce34abe
--- /dev/null
+++ b/src/arm/imx28-cfa10058.dts
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2013 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+#include "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10058 Board";
+	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				usb_pins_cfa10058: usb-10058@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_cfa10058: lcdif-10058@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+						 &lcdif_pins_cfa10058>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <30000000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <40>;
+							hfront-porch = <40>;
+							vback-porch = <13>;
+							vfront-porch = <29>;
+							hsync-len = <8>;
+							vsync-len = <8>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usb1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb1_vbus: regulator@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10058>;
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/src/arm/imx28-duckbill.dts b/src/arm/imx28-duckbill.dts
new file mode 100644
index 000000000000..ce1a7effba37
--- /dev/null
+++ b/src/arm/imx28-duckbill.dts
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill";
+	compatible = "i2se,duckbill", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_3p3v>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins_a: led_gpio@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__GPIO_3_4
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-supply = <&reg_3p3v>;
+			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a>;
+
+		status {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		failure {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/src/arm/imx28-eukrea-mbmx283lc.dts b/src/arm/imx28-eukrea-mbmx283lc.dts
new file mode 100644
index 000000000000..7c1572c5a4fb
--- /dev/null
+++ b/src/arm/imx28-eukrea-mbmx283lc.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC
+ */
+
+/dts-v1/;
+#include "imx28-eukrea-mbmx28lc.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX283LC";
+	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl{
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283>;
+
+	hog_pins_cpuimx283: hog-cpuimx283@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_ENET0_TX_CLK__GPIO_4_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/src/arm/imx28-eukrea-mbmx287lc.dts b/src/arm/imx28-eukrea-mbmx287lc.dts
new file mode 100644
index 000000000000..e773144e1e03
--- /dev/null
+++ b/src/arm/imx28-eukrea-mbmx287lc.dts
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC
+ */
+
+#include "imx28-eukrea-mbmx283lc.dts"
+
+/ {
+	model = "Eukrea Electromatique MBMX287LC";
+	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>;
+	hog_pins_cpuimx287: hog-cpuimx287@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
diff --git a/src/arm/imx28-eukrea-mbmx28lc.dtsi b/src/arm/imx28-eukrea-mbmx28lc.dtsi
new file mode 100644
index 000000000000..927b391d2058
--- /dev/null
+++ b/src/arm/imx28-eukrea-mbmx28lc.dtsi
@@ -0,0 +1,326 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "Eukrea Electromatique MBMX28LC";
+	compatible = "eukrea,mbmx28lc", "fsl,imx28";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 1000000>;
+		brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
+		default-brightness-level = <10>;
+	};
+
+	button-sw3 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
+
+		sw3 {
+			label = "SW3";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	button-sw4 {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
+
+		sw4 {
+			label = "SW4";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	led-d6 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d6_pins_mbmx28lc>;
+
+		led1 {
+			label = "d6";
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-d7 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_d7_pins_mbmx28lc>;
+
+		led1 {
+			label = "d7";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_lcd_3v3: regulator@1 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb0_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-mbmx28lc-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-mbmx28lc-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>;
+	lcd-supply = <&reg_lcd_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		model = "43WVF1G-0";
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9072000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <10>;
+				hfront-porch = <5>;
+				vback-porch = <8>;
+				vfront-porch = <8>;
+				hsync-len = <40>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D20__GPIO_1_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D18__GPIO_1_18
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D19__GPIO_1_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	cd-inverted;
+	status = "okay";
+};
+
+&usb0 {
+	disable-over-current;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_b>;
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/src/arm/imx28-evk.dts b/src/arm/imx28-evk.dts
new file mode 100644
index 000000000000..279249b8c3f3
--- /dev/null
+++ b/src/arm/imx28-evk.dts
@@ -0,0 +1,378 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "Freescale i.MX28 Evaluation Kit";
+	compatible = "fsl,imx28-evk", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
+					     &gpmi_pins_evk>;
+				status = "okay";
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <8>;
+				wp-gpios = <&gpio2 12 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			ssp1: ssp@80012000 {
+				compatible = "fsl,imx28-mmc";
+				bus-width = <8>;
+				wp-gpios = <&gpio0 28 0>;
+			};
+
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "sst,sst25vf016b";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP1_CMD__GPIO_2_13
+						MX28_PAD_SSP1_DATA3__GPIO_2_15
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+						MX28_PAD_SSP1_SCK__GPIO_2_12
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_LCD_RESET__GPIO_3_30
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_AUART2_TX__GPIO_3_9
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pin_gpio3_5: led_gpio3_5@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_evk: gpmi-nand-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_CE1N__GPMI_CE1N
+						MX28_PAD_GPMI_RDY1__GPMI_READY1
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_evk: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_evk>;
+				lcd-supply = <&reg_lcd_3v3>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <33500000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <89>;
+							hfront-porch = <164>;
+							vback-porch = <23>;
+							vfront-porch = <10>;
+							hsync-len = <10>;
+							vsync-len = <10>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <0>;
+						};
+					};
+				};
+			};
+
+			can0: can@80032000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can0_pins_a>;
+				xceiver-supply = <&reg_can_3v3>;
+				status = "okay";
+			};
+
+			can1: can@80034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can1_pins_a>;
+				xceiver-supply = <&reg_can_3v3>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			saif0: saif@80042000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif0_pins_a>;
+				status = "okay";
+			};
+
+			saif1: saif@80046000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif1_pins_a>;
+				fsl,saif-master = <&saif0>;
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+				fsl,ave-ctrl = <4>;
+				fsl,ave-delay = <2>;
+				fsl,settling = <10>;
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				sgtl5000: codec@0a {
+					compatible = "fsl,sgtl5000";
+					reg = <0x0a>;
+					VDDA-supply = <&reg_3p3v>;
+					VDDIO-supply = <&reg_3p3v>;
+					clocks = <&saif0>;
+				};
+
+				at24@51 {
+					compatible = "at24,24c32";
+					pagesize = <32>;
+					reg = <0x51>;
+				};
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				fsl,uart-has-rtscts;
+				status = "okay";
+			};
+
+			auart3: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart3_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_id_pins_a>;
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-supply = <&reg_fec_3v3>;
+			phy-reset-gpios = <&gpio4 13 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vddio_sd0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 28 0>;
+		};
+
+		reg_fec_3v3: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "fec-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 15 0>;
+		};
+
+		reg_usb0_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 9 0>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 8 0>;
+			enable-active-high;
+		};
+
+		reg_lcd_3v3: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 0>;
+			enable-active-high;
+		};
+
+		reg_can_3v3: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "can-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 13 0>;
+			enable-active-high;
+		};
+
+	};
+
+	sound {
+		compatible = "fsl,imx28-evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio3_5>;
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 5 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/src/arm/imx28-m28.dtsi b/src/arm/imx28-m28.dtsi
new file mode 100644
index 000000000000..759cc56253dd
--- /dev/null
+++ b/src/arm/imx28-m28.dtsi
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx28.dtsi"
+
+/ {
+	model = "DENX M28";
+	compatible = "denx,m28", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "bootloader";
+					reg = <0x00000000 0x00300000>;
+					read-only;
+				};
+
+				partition@1 {
+					label = "environment";
+					reg = <0x00300000 0x00080000>;
+				};
+
+				partition@2 {
+					label = "redundant-environment";
+					reg = <0x00380000 0x00080000>;
+				};
+
+				partition@3 {
+					label = "kernel";
+					reg = <0x00400000 0x00400000>;
+				};
+
+				partition@4 {
+					label = "filesystem";
+					reg = <0x00800000 0x0f800000>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				rtc: rtc@68 {
+					compatible = "stm,m41t62";
+					reg = <0x68>;
+				};
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/imx28-m28cu3.dts b/src/arm/imx28-m28cu3.dts
new file mode 100644
index 000000000000..2df63bee6f4e
--- /dev/null
+++ b/src/arm/imx28-m28cu3.dts
@@ -0,0 +1,271 @@
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "MSR M28CU3";
+	compatible = "msr,m28cu3", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "gpmi-nfc-0-boot";
+					reg = <0x00000000 0x01400000>;
+					read-only;
+				};
+
+				partition@1 {
+					label = "gpmi-nfc-general-use";
+					reg = <0x01400000 0x0ec00000>;
+				};
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_a
+					     &mmc2_cd_cfg
+					     &mmc2_sck_cfg>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd1>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS0__GPIO_2_19
+						MX28_PAD_PWM4__GPIO_3_29
+						MX28_PAD_AUART2_RX__GPIO_3_8
+						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_m28: lcdif-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_VSYNC__LCD_VSYNC
+						MX28_PAD_LCD_HSYNC__LCD_HSYNC
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_RESET__LCD_RESET
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_AUART1_TX__GPIO_3_5
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				led_pins_gpio: leds-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_MISO__GPIO_2_26
+						MX28_PAD_SSP3_SCK__GPIO_2_24
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			ocotp@8002c000 {
+				status = "okay";
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_m28>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <32>;
+					bus-width = <24>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <6410256>;
+							hactive = <320>;
+							vactive = <240>;
+							hback-porch = <38>;
+							hfront-porch = <20>;
+							vback-porch = <15>;
+							vfront-porch = <5>;
+							hsync-len = <30>;
+							vsync-len = <3>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_b>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			auart3: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart3_2pins_b>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb1_pins_a>;
+			disable-over-current;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio4 13 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_gpio>;
+
+		user1 {
+			label = "sd0-led";
+			gpios = <&gpio2 26 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user2 {
+			label = "sd1-led";
+			gpios = <&gpio2 24 0>;
+			linux,default-trigger = "mmc2";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vddio_sd0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 29 0>;
+		};
+
+		reg_vddio_sd1: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vddio-sd1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 19 0>;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 8 0>;
+			enable-active-high;
+		};
+	};
+};
diff --git a/src/arm/imx28-m28evk.dts b/src/arm/imx28-m28evk.dts
new file mode 100644
index 000000000000..e35cc6ba3ca6
--- /dev/null
+++ b/src/arm/imx28-m28evk.dts
@@ -0,0 +1,275 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28-m28.dtsi"
+
+/ {
+	model = "DENX M28EVK";
+	compatible = "denx,m28evk", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <8>;
+				wp-gpios = <&gpio3 10 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "m25p80";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM3__GPIO_3_28
+						MX28_PAD_AUART2_CTS__GPIO_3_10
+						MX28_PAD_AUART2_RTS__GPIO_3_11
+						MX28_PAD_AUART3_RX__GPIO_3_12
+						MX28_PAD_AUART3_TX__GPIO_3_13
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_pins_m28: lcdif-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+						MX28_PAD_LCD_ENABLE__LCD_ENABLE
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_m28>;
+				display = <&display0>;
+				status = "okay";
+
+				display0: display0 {
+					bits-per-pixel = <16>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <33260000>;
+							hactive = <800>;
+							vactive = <480>;
+							hback-porch = <0>;
+							hfront-porch = <256>;
+							vback-porch = <0>;
+							vfront-porch = <45>;
+							hsync-len = <1>;
+							vsync-len = <1>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+
+			can0: can@80032000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can0_pins_a>;
+				status = "okay";
+			};
+
+			can1: can@80034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can1_pins_a>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			saif0: saif@80042000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif0_pins_a>;
+				status = "okay";
+			};
+
+			saif1: saif@80046000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif1_pins_a>;
+				fsl,saif-master = <&saif0>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				sgtl5000: codec@0a {
+					compatible = "fsl,sgtl5000";
+					reg = <0x0a>;
+					VDDA-supply = <&reg_3p3v>;
+					VDDIO-supply = <&reg_3p3v>;
+					clocks = <&saif0>;
+				};
+
+				eeprom: eeprom@51 {
+					compatible = "atmel,24c128";
+					reg = <0x51>;
+					pagesize = <32>;
+				};
+			};
+
+			lradc@80050000 {
+				status = "okay";
+				fsl,lradc-touchscreen-wires = <4>;
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_pins_a>;
+				status = "okay";
+			};
+
+			auart2: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart2_2pins_b>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm4_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_pins_a>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb1_pins_a>;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 4 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	regulators {
+		reg_vddio_sd0: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 28 0>;
+		};
+
+		reg_usb0_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 12 0>;
+		};
+
+		reg_usb1_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 13 0>;
+		};
+	};
+
+	sound {
+		compatible = "denx,m28evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "m28evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
diff --git a/src/arm/imx28-pinfunc.h b/src/arm/imx28-pinfunc.h
new file mode 100644
index 000000000000..e11f69ba0fe4
--- /dev/null
+++ b/src/arm/imx28-pinfunc.h
@@ -0,0 +1,506 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MX28_PINCTRL_H__
+#define __DT_BINDINGS_MX28_PINCTRL_H__
+
+#include "mxs-pinfunc.h"
+
+#define MX28_PAD_GPMI_D00__GPMI_D0			0x0000
+#define MX28_PAD_GPMI_D01__GPMI_D1			0x0010
+#define MX28_PAD_GPMI_D02__GPMI_D2			0x0020
+#define MX28_PAD_GPMI_D03__GPMI_D3			0x0030
+#define MX28_PAD_GPMI_D04__GPMI_D4			0x0040
+#define MX28_PAD_GPMI_D05__GPMI_D5			0x0050
+#define MX28_PAD_GPMI_D06__GPMI_D6			0x0060
+#define MX28_PAD_GPMI_D07__GPMI_D7			0x0070
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			0x0100
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			0x0110
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			0x0120
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			0x0130
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			0x0140
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			0x0150
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			0x0160
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			0x0170
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			0x0180
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			0x0190
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			0x01a0
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			0x01b0
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		0x01c0
+#define MX28_PAD_LCD_D00__LCD_D0			0x1000
+#define MX28_PAD_LCD_D01__LCD_D1			0x1010
+#define MX28_PAD_LCD_D02__LCD_D2			0x1020
+#define MX28_PAD_LCD_D03__LCD_D3			0x1030
+#define MX28_PAD_LCD_D04__LCD_D4			0x1040
+#define MX28_PAD_LCD_D05__LCD_D5			0x1050
+#define MX28_PAD_LCD_D06__LCD_D6			0x1060
+#define MX28_PAD_LCD_D07__LCD_D7			0x1070
+#define MX28_PAD_LCD_D08__LCD_D8			0x1080
+#define MX28_PAD_LCD_D09__LCD_D9			0x1090
+#define MX28_PAD_LCD_D10__LCD_D10			0x10a0
+#define MX28_PAD_LCD_D11__LCD_D11			0x10b0
+#define MX28_PAD_LCD_D12__LCD_D12			0x10c0
+#define MX28_PAD_LCD_D13__LCD_D13			0x10d0
+#define MX28_PAD_LCD_D14__LCD_D14			0x10e0
+#define MX28_PAD_LCD_D15__LCD_D15			0x10f0
+#define MX28_PAD_LCD_D16__LCD_D16			0x1100
+#define MX28_PAD_LCD_D17__LCD_D17			0x1110
+#define MX28_PAD_LCD_D18__LCD_D18			0x1120
+#define MX28_PAD_LCD_D19__LCD_D19			0x1130
+#define MX28_PAD_LCD_D20__LCD_D20			0x1140
+#define MX28_PAD_LCD_D21__LCD_D21			0x1150
+#define MX28_PAD_LCD_D22__LCD_D22			0x1160
+#define MX28_PAD_LCD_D23__LCD_D23			0x1170
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			0x1180
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			0x1190
+#define MX28_PAD_LCD_RS__LCD_RS				0x11a0
+#define MX28_PAD_LCD_CS__LCD_CS				0x11b0
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			0x11c0
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			0x11d0
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			0x11e0
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			0x11f0
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			0x2000
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			0x2010
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			0x2020
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			0x2030
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			0x2040
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			0x2050
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			0x2060
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			0x2070
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			0x2080
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		0x2090
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			0x20a0
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			0x20c0
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			0x20d0
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			0x20e0
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			0x20f0
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			0x2100
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			0x2110
+#define MX28_PAD_SSP2_MISO__SSP2_D0			0x2120
+#define MX28_PAD_SSP2_SS0__SSP2_D3			0x2130
+#define MX28_PAD_SSP2_SS1__SSP2_D4			0x2140
+#define MX28_PAD_SSP2_SS2__SSP2_D5			0x2150
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			0x2180
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			0x2190
+#define MX28_PAD_SSP3_MISO__SSP3_D0			0x21a0
+#define MX28_PAD_SSP3_SS0__SSP3_D3			0x21b0
+#define MX28_PAD_AUART0_RX__AUART0_RX			0x3000
+#define MX28_PAD_AUART0_TX__AUART0_TX			0x3010
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			0x3020
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			0x3030
+#define MX28_PAD_AUART1_RX__AUART1_RX			0x3040
+#define MX28_PAD_AUART1_TX__AUART1_TX			0x3050
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			0x3060
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			0x3070
+#define MX28_PAD_AUART2_RX__AUART2_RX			0x3080
+#define MX28_PAD_AUART2_TX__AUART2_TX			0x3090
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			0x30a0
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			0x30b0
+#define MX28_PAD_AUART3_RX__AUART3_RX			0x30c0
+#define MX28_PAD_AUART3_TX__AUART3_TX			0x30d0
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			0x30e0
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			0x30f0
+#define MX28_PAD_PWM0__PWM_0				0x3100
+#define MX28_PAD_PWM1__PWM_1				0x3110
+#define MX28_PAD_PWM2__PWM_2				0x3120
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			0x3140
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		0x3150
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		0x3160
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		0x3170
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			0x3180
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			0x3190
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		0x31a0
+#define MX28_PAD_SPDIF__SPDIF_TX			0x31b0
+#define MX28_PAD_PWM3__PWM_3				0x31c0
+#define MX28_PAD_PWM4__PWM_4				0x31d0
+#define MX28_PAD_LCD_RESET__LCD_RESET			0x31e0
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			0x4000
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			0x4010
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		0x4020
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			0x4030
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			0x4040
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		0x4050
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		0x4060
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			0x4070
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			0x4080
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			0x4090
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			0x40a0
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			0x40b0
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			0x40c0
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		0x40d0
+#define MX28_PAD_ENET0_COL__ENET0_COL			0x40e0
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			0x40f0
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			0x4100
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			0x4140
+#define MX28_PAD_EMI_D00__EMI_DATA0			0x5000
+#define MX28_PAD_EMI_D01__EMI_DATA1			0x5010
+#define MX28_PAD_EMI_D02__EMI_DATA2			0x5020
+#define MX28_PAD_EMI_D03__EMI_DATA3			0x5030
+#define MX28_PAD_EMI_D04__EMI_DATA4			0x5040
+#define MX28_PAD_EMI_D05__EMI_DATA5			0x5050
+#define MX28_PAD_EMI_D06__EMI_DATA6			0x5060
+#define MX28_PAD_EMI_D07__EMI_DATA7			0x5070
+#define MX28_PAD_EMI_D08__EMI_DATA8			0x5080
+#define MX28_PAD_EMI_D09__EMI_DATA9			0x5090
+#define MX28_PAD_EMI_D10__EMI_DATA10			0x50a0
+#define MX28_PAD_EMI_D11__EMI_DATA11			0x50b0
+#define MX28_PAD_EMI_D12__EMI_DATA12			0x50c0
+#define MX28_PAD_EMI_D13__EMI_DATA13			0x50d0
+#define MX28_PAD_EMI_D14__EMI_DATA14			0x50e0
+#define MX28_PAD_EMI_D15__EMI_DATA15			0x50f0
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			0x5100
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			0x5110
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			0x5120
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			0x5130
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	0x5140
+#define MX28_PAD_EMI_CLK__EMI_CLK			0x5150
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			0x5160
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			0x5170
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		0x51a0
+#define MX28_PAD_EMI_A00__EMI_ADDR0			0x6000
+#define MX28_PAD_EMI_A01__EMI_ADDR1			0x6010
+#define MX28_PAD_EMI_A02__EMI_ADDR2			0x6020
+#define MX28_PAD_EMI_A03__EMI_ADDR3			0x6030
+#define MX28_PAD_EMI_A04__EMI_ADDR4			0x6040
+#define MX28_PAD_EMI_A05__EMI_ADDR5			0x6050
+#define MX28_PAD_EMI_A06__EMI_ADDR6			0x6060
+#define MX28_PAD_EMI_A07__EMI_ADDR7			0x6070
+#define MX28_PAD_EMI_A08__EMI_ADDR8			0x6080
+#define MX28_PAD_EMI_A09__EMI_ADDR9			0x6090
+#define MX28_PAD_EMI_A10__EMI_ADDR10			0x60a0
+#define MX28_PAD_EMI_A11__EMI_ADDR11			0x60b0
+#define MX28_PAD_EMI_A12__EMI_ADDR12			0x60c0
+#define MX28_PAD_EMI_A13__EMI_ADDR13			0x60d0
+#define MX28_PAD_EMI_A14__EMI_ADDR14			0x60e0
+#define MX28_PAD_EMI_BA0__EMI_BA0			0x6100
+#define MX28_PAD_EMI_BA1__EMI_BA1			0x6110
+#define MX28_PAD_EMI_BA2__EMI_BA2			0x6120
+#define MX28_PAD_EMI_CASN__EMI_CASN			0x6130
+#define MX28_PAD_EMI_RASN__EMI_RASN			0x6140
+#define MX28_PAD_EMI_WEN__EMI_WEN			0x6150
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			0x6160
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			0x6170
+#define MX28_PAD_EMI_CKE__EMI_CKE			0x6180
+#define MX28_PAD_GPMI_D00__SSP1_D0			0x0001
+#define MX28_PAD_GPMI_D01__SSP1_D1			0x0011
+#define MX28_PAD_GPMI_D02__SSP1_D2			0x0021
+#define MX28_PAD_GPMI_D03__SSP1_D3			0x0031
+#define MX28_PAD_GPMI_D04__SSP1_D4			0x0041
+#define MX28_PAD_GPMI_D05__SSP1_D5			0x0051
+#define MX28_PAD_GPMI_D06__SSP1_D6			0x0061
+#define MX28_PAD_GPMI_D07__SSP1_D7			0x0071
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			0x0101
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			0x0111
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			0x0121
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			0x0131
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		0x0141
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			0x0151
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			0x0161
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			0x0171
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			0x0181
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			0x0191
+#define MX28_PAD_GPMI_ALE__SSP3_D1			0x01a1
+#define MX28_PAD_GPMI_CLE__SSP3_D2			0x01b1
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			0x01c1
+#define MX28_PAD_LCD_D03__ETM_DA8			0x1031
+#define MX28_PAD_LCD_D04__ETM_DA9			0x1041
+#define MX28_PAD_LCD_D08__ETM_DA3			0x1081
+#define MX28_PAD_LCD_D09__ETM_DA4			0x1091
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		0x1141
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		0x1151
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		0x1161
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		0x1171
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			0x1181
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			0x1191
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			0x11a1
+#define MX28_PAD_LCD_CS__LCD_ENABLE			0x11b1
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		0x11c1
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		0x11d1
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			0x11e1
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			0x2041
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			0x2051
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			0x2061
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			0x2071
+#define MX28_PAD_SSP1_SCK__SSP2_D1			0x20c1
+#define MX28_PAD_SSP1_CMD__SSP2_D2			0x20d1
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			0x20e1
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			0x20f1
+#define MX28_PAD_SSP2_SCK__AUART2_RX			0x2101
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			0x2111
+#define MX28_PAD_SSP2_MISO__AUART3_RX			0x2121
+#define MX28_PAD_SSP2_SS0__AUART3_TX			0x2131
+#define MX28_PAD_SSP2_SS1__SSP2_D1			0x2141
+#define MX28_PAD_SSP2_SS2__SSP2_D2			0x2151
+#define MX28_PAD_SSP3_SCK__AUART4_TX			0x2181
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			0x2191
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			0x21a1
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			0x21b1
+#define MX28_PAD_AUART0_RX__I2C0_SCL			0x3001
+#define MX28_PAD_AUART0_TX__I2C0_SDA			0x3011
+#define MX28_PAD_AUART0_CTS__AUART4_RX			0x3021
+#define MX28_PAD_AUART0_RTS__AUART4_TX			0x3031
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		0x3041
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		0x3051
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		0x3061
+#define MX28_PAD_AUART1_RTS__USB0_ID			0x3071
+#define MX28_PAD_AUART2_RX__SSP3_D1			0x3081
+#define MX28_PAD_AUART2_TX__SSP3_D2			0x3091
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			0x30a1
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			0x30b1
+#define MX28_PAD_AUART3_RX__CAN0_TX			0x30c1
+#define MX28_PAD_AUART3_TX__CAN0_RX			0x30d1
+#define MX28_PAD_AUART3_CTS__CAN1_TX			0x30e1
+#define MX28_PAD_AUART3_RTS__CAN1_RX			0x30f1
+#define MX28_PAD_PWM0__I2C1_SCL				0x3101
+#define MX28_PAD_PWM1__I2C1_SDA				0x3111
+#define MX28_PAD_PWM2__USB0_ID				0x3121
+#define MX28_PAD_SAIF0_MCLK__PWM_3			0x3141
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			0x3151
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			0x3161
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			0x3171
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		0x3181
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		0x3191
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			0x31a1
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			0x31e1
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			0x4001
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			0x4011
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			0x4021
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			0x4031
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		0x4041
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		0x4051
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		0x4061
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		0x4071
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		0x4081
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			0x4091
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			0x40a1
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			0x40b1
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			0x40c1
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		0x40d1
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			0x40e1
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			0x40f1
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			0x0122
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			0x0132
+#define MX28_PAD_GPMI_RDY0__USB0_ID			0x0142
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			0x0162
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		0x0172
+#define MX28_PAD_GPMI_ALE__SSP3_D4			0x01a2
+#define MX28_PAD_GPMI_CLE__SSP3_D5			0x01b2
+#define MX28_PAD_LCD_D00__ETM_DA0			0x1002
+#define MX28_PAD_LCD_D01__ETM_DA1			0x1012
+#define MX28_PAD_LCD_D02__ETM_DA2			0x1022
+#define MX28_PAD_LCD_D03__ETM_DA3			0x1032
+#define MX28_PAD_LCD_D04__ETM_DA4			0x1042
+#define MX28_PAD_LCD_D05__ETM_DA5			0x1052
+#define MX28_PAD_LCD_D06__ETM_DA6			0x1062
+#define MX28_PAD_LCD_D07__ETM_DA7			0x1072
+#define MX28_PAD_LCD_D08__ETM_DA8			0x1082
+#define MX28_PAD_LCD_D09__ETM_DA9			0x1092
+#define MX28_PAD_LCD_D10__ETM_DA10			0x10a2
+#define MX28_PAD_LCD_D11__ETM_DA11			0x10b2
+#define MX28_PAD_LCD_D12__ETM_DA12			0x10c2
+#define MX28_PAD_LCD_D13__ETM_DA13			0x10d2
+#define MX28_PAD_LCD_D14__ETM_DA14			0x10e2
+#define MX28_PAD_LCD_D15__ETM_DA15			0x10f2
+#define MX28_PAD_LCD_D16__ETM_DA7			0x1102
+#define MX28_PAD_LCD_D17__ETM_DA6			0x1112
+#define MX28_PAD_LCD_D18__ETM_DA5			0x1122
+#define MX28_PAD_LCD_D19__ETM_DA4			0x1132
+#define MX28_PAD_LCD_D20__ETM_DA3			0x1142
+#define MX28_PAD_LCD_D21__ETM_DA2			0x1152
+#define MX28_PAD_LCD_D22__ETM_DA1			0x1162
+#define MX28_PAD_LCD_D23__ETM_DA0			0x1172
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			0x1182
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			0x1192
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			0x11d2
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			0x11e2
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	0x20c2
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		0x20d2
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	0x20e2
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	0x20f2
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			0x2102
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		0x2112
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		0x2122
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			0x2132
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		0x2142
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		0x2152
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	0x2182
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	0x2192
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	0x21a2
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		0x21b2
+#define MX28_PAD_AUART0_RX__DUART_CTS			0x3002
+#define MX28_PAD_AUART0_TX__DUART_RTS			0x3012
+#define MX28_PAD_AUART0_CTS__DUART_RX			0x3022
+#define MX28_PAD_AUART0_RTS__DUART_TX			0x3032
+#define MX28_PAD_AUART1_RX__PWM_0			0x3042
+#define MX28_PAD_AUART1_TX__PWM_1			0x3052
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		0x3062
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		0x3072
+#define MX28_PAD_AUART2_RX__SSP3_D4			0x3082
+#define MX28_PAD_AUART2_TX__SSP3_D5			0x3092
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		0x30a2
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		0x30b2
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	0x30c2
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	0x30d2
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	0x30e2
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	0x30f2
+#define MX28_PAD_PWM0__DUART_RX				0x3102
+#define MX28_PAD_PWM1__DUART_TX				0x3112
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			0x3122
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			0x3142
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		0x3152
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		0x3162
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		0x3172
+#define MX28_PAD_I2C0_SCL__DUART_RX			0x3182
+#define MX28_PAD_I2C0_SDA__DUART_TX			0x3192
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		0x31a2
+#define MX28_PAD_SPDIF__ENET1_RX_ER			0x31b2
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		0x4002
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		0x4012
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		0x4022
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		0x4032
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	0x4052
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	0x4092
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	0x40a2
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	0x40b2
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	0x40c2
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	0x40d2
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	0x40e2
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	0x40f2
+#define MX28_PAD_GPMI_D00__GPIO_0_0			0x0003
+#define MX28_PAD_GPMI_D01__GPIO_0_1			0x0013
+#define MX28_PAD_GPMI_D02__GPIO_0_2			0x0023
+#define MX28_PAD_GPMI_D03__GPIO_0_3			0x0033
+#define MX28_PAD_GPMI_D04__GPIO_0_4			0x0043
+#define MX28_PAD_GPMI_D05__GPIO_0_5			0x0053
+#define MX28_PAD_GPMI_D06__GPIO_0_6			0x0063
+#define MX28_PAD_GPMI_D07__GPIO_0_7			0x0073
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			0x0103
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			0x0113
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			0x0123
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			0x0133
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			0x0143
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			0x0153
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			0x0163
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			0x0173
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			0x0183
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			0x0193
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			0x01a3
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			0x01b3
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			0x01c3
+#define MX28_PAD_LCD_D00__GPIO_1_0			0x1003
+#define MX28_PAD_LCD_D01__GPIO_1_1			0x1013
+#define MX28_PAD_LCD_D02__GPIO_1_2			0x1023
+#define MX28_PAD_LCD_D03__GPIO_1_3			0x1033
+#define MX28_PAD_LCD_D04__GPIO_1_4			0x1043
+#define MX28_PAD_LCD_D05__GPIO_1_5			0x1053
+#define MX28_PAD_LCD_D06__GPIO_1_6			0x1063
+#define MX28_PAD_LCD_D07__GPIO_1_7			0x1073
+#define MX28_PAD_LCD_D08__GPIO_1_8			0x1083
+#define MX28_PAD_LCD_D09__GPIO_1_9			0x1093
+#define MX28_PAD_LCD_D10__GPIO_1_10			0x10a3
+#define MX28_PAD_LCD_D11__GPIO_1_11			0x10b3
+#define MX28_PAD_LCD_D12__GPIO_1_12			0x10c3
+#define MX28_PAD_LCD_D13__GPIO_1_13			0x10d3
+#define MX28_PAD_LCD_D14__GPIO_1_14			0x10e3
+#define MX28_PAD_LCD_D15__GPIO_1_15			0x10f3
+#define MX28_PAD_LCD_D16__GPIO_1_16			0x1103
+#define MX28_PAD_LCD_D17__GPIO_1_17			0x1113
+#define MX28_PAD_LCD_D18__GPIO_1_18			0x1123
+#define MX28_PAD_LCD_D19__GPIO_1_19			0x1133
+#define MX28_PAD_LCD_D20__GPIO_1_20			0x1143
+#define MX28_PAD_LCD_D21__GPIO_1_21			0x1153
+#define MX28_PAD_LCD_D22__GPIO_1_22			0x1163
+#define MX28_PAD_LCD_D23__GPIO_1_23			0x1173
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			0x1183
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			0x1193
+#define MX28_PAD_LCD_RS__GPIO_1_26			0x11a3
+#define MX28_PAD_LCD_CS__GPIO_1_27			0x11b3
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			0x11c3
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			0x11d3
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			0x11e3
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			0x11f3
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			0x2003
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			0x2013
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			0x2023
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			0x2033
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			0x2043
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			0x2053
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			0x2063
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			0x2073
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			0x2083
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			0x2093
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			0x20a3
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			0x20c3
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			0x20d3
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			0x20e3
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			0x20f3
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			0x2103
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			0x2113
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			0x2123
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			0x2133
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			0x2143
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			0x2153
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			0x2183
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			0x2193
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			0x21a3
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			0x21b3
+#define MX28_PAD_AUART0_RX__GPIO_3_0			0x3003
+#define MX28_PAD_AUART0_TX__GPIO_3_1			0x3013
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			0x3023
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			0x3033
+#define MX28_PAD_AUART1_RX__GPIO_3_4			0x3043
+#define MX28_PAD_AUART1_TX__GPIO_3_5			0x3053
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			0x3063
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			0x3073
+#define MX28_PAD_AUART2_RX__GPIO_3_8			0x3083
+#define MX28_PAD_AUART2_TX__GPIO_3_9			0x3093
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			0x30a3
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			0x30b3
+#define MX28_PAD_AUART3_RX__GPIO_3_12			0x30c3
+#define MX28_PAD_AUART3_TX__GPIO_3_13			0x30d3
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			0x30e3
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			0x30f3
+#define MX28_PAD_PWM0__GPIO_3_16			0x3103
+#define MX28_PAD_PWM1__GPIO_3_17			0x3113
+#define MX28_PAD_PWM2__GPIO_3_18			0x3123
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			0x3143
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			0x3153
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		0x3163
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		0x3173
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			0x3183
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			0x3193
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		0x31a3
+#define MX28_PAD_SPDIF__GPIO_3_27			0x31b3
+#define MX28_PAD_PWM3__GPIO_3_28			0x31c3
+#define MX28_PAD_PWM4__GPIO_3_29			0x31d3
+#define MX28_PAD_LCD_RESET__GPIO_3_30			0x31e3
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			0x4003
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			0x4013
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			0x4023
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			0x4033
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			0x4043
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			0x4053
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			0x4063
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			0x4073
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			0x4083
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			0x4093
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			0x40a3
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			0x40b3
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			0x40c3
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		0x40d3
+#define MX28_PAD_ENET0_COL__GPIO_4_14			0x40e3
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			0x40f3
+#define MX28_PAD_ENET_CLK__GPIO_4_16			0x4103
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			0x4143
+
+#endif /* __DT_BINDINGS_MX28_PINCTRL_H__ */
diff --git a/src/arm/imx28-sps1.dts b/src/arm/imx28-sps1.dts
new file mode 100644
index 000000000000..0ce3cb8e7914
--- /dev/null
+++ b/src/arm/imx28-sps1.dts
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	model = "SchulerControl GmbH, SC SPS 1";
+	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__GPIO_0_0
+						MX28_PAD_GPMI_D03__GPIO_0_3
+						MX28_PAD_GPMI_D06__GPIO_0_6
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "everspin,mr25h256", "mr25h256";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				rtc: rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+				eeprom: eeprom@52 {
+					compatible = "atmel,24c64";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_pins_b>;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 9 0>;
+		};
+	};
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led@1 {
+			label = "sps1-1:yellow:user";
+			gpios = <&gpio0 6 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <0>;
+		};
+
+		led@2 {
+			label = "sps1-2:red:user";
+			gpios = <&gpio0 3 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <1>;
+		};
+
+		led@3 {
+			label = "sps1-3:red:user";
+			gpios = <&gpio0 0 0>;
+			default-trigger = "heartbeat";
+			reg = <2>;
+		};
+
+	};
+};
diff --git a/src/arm/imx28-tx28.dts b/src/arm/imx28-tx28.dts
new file mode 100644
index 000000000000..a5b27c85a91c
--- /dev/null
+++ b/src/arm/imx28-tx28.dts
@@ -0,0 +1,722 @@
+/*
+ * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
+ * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Ka-Ro electronics TX28 module";
+	compatible = "karo,tx28", "fsl,imx28";
+
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		display = &display0;
+		ds1339 = &ds1339;
+		gpio5 = &gpio5;
+		lcdif = &lcdif;
+		lcdif_23bit_pins = &tx28_lcdif_23bit_pins;
+		lcdif_24bit_pins = &lcdif_24bit_pins_a;
+		reg_can_xcvr = &reg_can_xcvr;
+		spi_gpio = &spi_gpio;
+		spi_mxs = &ssp3;
+		stk5led = &user_led;
+		usbotg = &usb0;
+	};
+
+	memory {
+		reg = <0 0>; /* will be filled in by U-Boot */
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb0_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_2p5v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_can_xcvr: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
+		};
+
+		reg_lcd: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "LCD POWER";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_lcd_reset: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "LCD RESET";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <300000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mclk: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx28-tx28-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "imx28-tx28-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led: user {
+			label = "Heartbeat";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 500000>;
+		/*
+		 * a silly way to create a 1:1 relationship between the
+		 * PWM value and the actual duty cycle
+		 */
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+	};
+
+	matrix_keypad: matrix-keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		col-gpios = <
+			&gpio5 0 GPIO_ACTIVE_HIGH
+			&gpio5 1 GPIO_ACTIVE_HIGH
+			&gpio5 2 GPIO_ACTIVE_HIGH
+			&gpio5 3 GPIO_ACTIVE_HIGH
+		>;
+		row-gpios = <
+			&gpio5 4 GPIO_ACTIVE_HIGH
+			&gpio5 5 GPIO_ACTIVE_HIGH
+			&gpio5 6 GPIO_ACTIVE_HIGH
+			&gpio5 7 GPIO_ACTIVE_HIGH
+		>;
+		/* sample keymap */
+		linux,keymap = <
+			0x00000074 /* row 0, col 0, KEY_POWER */
+			0x00010052 /* row 0, col 1, KEY_KP0 */
+			0x0002004f /* row 0, col 2, KEY_KP1 */
+			0x00030050 /* row 0, col 3, KEY_KP2 */
+			0x01000051 /* row 1, col 0, KEY_KP3 */
+			0x0101004b /* row 1, col 1, KEY_KP4 */
+			0x0102004c /* row 1, col 2, KEY_KP5 */
+			0x0103004d /* row 1, col 3, KEY_KP6 */
+			0x02000047 /* row 2, col 0, KEY_KP7 */
+			0x02010048 /* row 2, col 1, KEY_KP8 */
+			0x02020049 /* row 2, col 2, KEY_KP9 */
+		>;
+		gpio-activelow;
+		linux,wakeup;
+		debounce-delay-ms = <100>;
+		col-scan-delay-us = <5000>;
+		linux,no-autorepeat;
+	};
+
+	spi_gpio: spi-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_spi_gpio_pins>;
+
+		gpio-sck = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <3>;
+		cs-gpios = <
+			&gpio2 27 GPIO_ACTIVE_LOW
+			&gpio3 8 GPIO_ACTIVE_LOW
+			&gpio3 9 GPIO_ACTIVE_LOW
+		>;
+		/* enable this and disable ssp3 below, if you need full duplex SPI transfer */
+		status = "disabled";
+
+		spi@0 {
+			compatible = "spidev";
+			reg = <0>;
+			spi-max-frequency = <57600000>;
+		};
+
+		spi@1 {
+			compatible = "spidev";
+			reg = <1>;
+			spi-max-frequency = <57600000>;
+		};
+
+		spi@2 {
+			compatible = "spidev";
+			reg = <2>;
+			spi-max-frequency = <57600000>;
+		};
+	};
+};
+
+/* 2nd TX-Std UART - (A)UART1  */
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+/* 3rd TX-Std UART - (A)UART3  */
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&digctl {
+	status = "okay";
+};
+
+/* 1st TX-Std UART - (D)UART */
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_4pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&mclk>;
+	};
+
+	gpio5: pca953x@20 {
+		compatible = "nxp,pca9554";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_pca9554_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <28 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	polytouch: edt-ft5x06@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <5 0>;
+		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	touchscreen: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_tsc2007_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 0>;
+		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = /bits/ 16 <660>;
+	};
+
+	ds1339: rtc@68 {
+		compatible = "mxim,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_sync_pins_a &tx28_lcdif_ctrl_pins>;
+	lcd-supply = <&reg_lcd>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+		display-timings {
+			native-mode = <&timing5>;
+			timing0: timing0 {
+				panel-name = "VGA";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing1: timing1 {
+				panel-name = "ETV570";
+				clock-frequency = <25175000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing2: timing2 {
+				panel-name = "ET0350";
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing3: timing3 {
+				panel-name = "ET0430";
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing4: timing4 {
+				panel-name = "ET0500", "ET0700";
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+
+			timing5: timing5 {
+				panel-name = "ETQ570";
+				clock-frequency = <6400000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default", "gpio_mode";
+	pinctrl-0 = <&mac0_pins_a>;
+	pinctrl-1 = <&tx28_mac0_pins_gpio>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	/* not enabled by default */
+};
+
+&mxs_rtc {
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_RXD3__GPIO_4_10 /* module LED */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
+			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
+			MX28_PAD_ENET0_RXD2__GPIO_4_9 /* WAKE */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__GPIO_1_0
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_23bit_pins: tx28-lcdif-23bit {
+		fsl,pinmux-ids = <
+			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+			MX28_PAD_LCD_D18__LCD_D18
+			MX28_PAD_LCD_D19__LCD_D19
+			MX28_PAD_LCD_D20__LCD_D20
+			MX28_PAD_LCD_D21__LCD_D21
+			MX28_PAD_LCD_D22__LCD_D22
+			MX28_PAD_LCD_D23__LCD_D23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl {
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
+			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_ENET0_MDC__GPIO_4_0
+			MX28_PAD_ENET0_MDIO__GPIO_4_1
+			MX28_PAD_ENET0_RX_EN__GPIO_4_2
+			MX28_PAD_ENET0_RXD0__GPIO_4_3
+			MX28_PAD_ENET0_RXD1__GPIO_4_4
+			MX28_PAD_ENET0_TX_EN__GPIO_4_6
+			MX28_PAD_ENET0_TXD0__GPIO_4_7
+			MX28_PAD_ENET0_TXD1__GPIO_4_8
+			MX28_PAD_ENET_CLK__GPIO_4_16
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_pca9554_pins: tx28-pca9554-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_spi_gpio_pins: spi-gpiogrp {
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_AUART2_TX__GPIO_3_9
+			MX28_PAD_SSP3_SCK__GPIO_2_24
+			MX28_PAD_SSP3_MOSI__GPIO_2_25
+			MX28_PAD_SSP3_MISO__GPIO_2_26
+			MX28_PAD_SSP3_SS0__GPIO_2_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_tsc2007_pins: tx28-tsc2007-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+
+	tx28_usbphy0_pins: tx28-usbphy0-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
+			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	tx28_usbphy1_pins: tx28-usbphy1-pins {
+		fsl,pinmux-ids = <
+			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
+			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_b>;
+	fsl,saif-master;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default", "special";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp3 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_a>;
+	clock-frequency = <57600000>;
+	status = "okay";
+
+	spi@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <57600000>;
+	};
+
+	spi@1 {
+		compatible = "spidev";
+		reg = <1>;
+		spi-max-frequency = <57600000>;
+	};
+
+	spi@2 {
+		compatible = "spidev";
+		reg = <2>;
+		spi-max-frequency = <57600000>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	disable-over-current;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy0_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&tx28_usbphy1_pins>;
+	phy_type = "utmi";
+	status = "okay";
+};
diff --git a/src/arm/imx28.dtsi b/src/arm/imx28.dtsi
new file mode 100644
index 000000000000..47f68ac868d4
--- /dev/null
+++ b/src/arm/imx28.dtsi
@@ -0,0 +1,1236 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+#include "imx28-pinfunc.h"
+
+/ {
+	interrupt-parent = <&icoll>;
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		saif0 = &saif0;
+		saif1 = &saif1;
+		serial0 = &auart0;
+		serial1 = &auart1;
+		serial2 = &auart2;
+		serial3 = &auart3;
+		serial4 = &auart4;
+		spi0 = &ssp1;
+		spi1 = &ssp2;
+		usbphy0 = &usbphy0;
+		usbphy1 = &usbphy1;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	apb@80000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80000000 0x80000>;
+		ranges;
+
+		apbh@80000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3c900>;
+			ranges;
+
+			icoll: interrupt-controller@80000000 {
+				compatible = "fsl,imx28-icoll", "fsl,icoll";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x80000000 0x2000>;
+			};
+
+			hsadc: hsadc@80002000 {
+				reg = <0x80002000 0x2000>;
+				interrupts = <13>;
+				dmas = <&dma_apbh 12>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dma_apbh: dma-apbh@80004000 {
+				compatible = "fsl,imx28-dma-apbh";
+				reg = <0x80004000 0x2000>;
+				interrupts = <82 83 84 85
+					      88 88 88 88
+					      88 88 88 88
+					      87 86 0 0>;
+				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+						  "hsadc", "lcdif", "empty", "empty";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 25>;
+			};
+
+			perfmon: perfmon@80006000 {
+				reg = <0x80006000 0x800>;
+				interrupts = <27>;
+				status = "disabled";
+			};
+
+			gpmi: gpmi-nand@8000c000 {
+				compatible = "fsl,imx28-gpmi-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
+				reg-names = "gpmi-nand", "bch";
+				interrupts = <41>;
+				interrupt-names = "bch";
+				clocks = <&clks 50>;
+				clock-names = "gpmi_io";
+				dmas = <&dma_apbh 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp0: ssp@80010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80010000 0x2000>;
+				interrupts = <96>;
+				clocks = <&clks 46>;
+				dmas = <&dma_apbh 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp1: ssp@80012000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80012000 0x2000>;
+				interrupts = <97>;
+				clocks = <&clks 47>;
+				dmas = <&dma_apbh 1>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80014000 0x2000>;
+				interrupts = <98>;
+				clocks = <&clks 48>;
+				dmas = <&dma_apbh 2>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			ssp3: ssp@80016000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x80016000 0x2000>;
+				interrupts = <99>;
+				clocks = <&clks 49>;
+				dmas = <&dma_apbh 3>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			pinctrl: pinctrl@80018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-pinctrl", "simple-bus";
+				reg = <0x80018000 0x2000>;
+
+				gpio0: gpio@0 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <127>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio1: gpio@1 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <126>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio2: gpio@2 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <125>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio3: gpio@3 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <124>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				gpio4: gpio@4 {
+					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					interrupts = <123>;
+					gpio-controller;
+					#gpio-cells = <2>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+				};
+
+				duart_pins_a: duart@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__DUART_RX
+						MX28_PAD_PWM1__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				duart_pins_b: duart@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				duart_4pins_a: duart-4pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__DUART_RX
+						MX28_PAD_AUART0_RTS__DUART_TX
+						MX28_PAD_AUART0_RX__DUART_CTS
+						MX28_PAD_AUART0_TX__DUART_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_pins_a: gpmi-nand@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__GPMI_D0
+						MX28_PAD_GPMI_D01__GPMI_D1
+						MX28_PAD_GPMI_D02__GPMI_D2
+						MX28_PAD_GPMI_D03__GPMI_D3
+						MX28_PAD_GPMI_D04__GPMI_D4
+						MX28_PAD_GPMI_D05__GPMI_D5
+						MX28_PAD_GPMI_D06__GPMI_D6
+						MX28_PAD_GPMI_D07__GPMI_D7
+						MX28_PAD_GPMI_CE0N__GPMI_CE0N
+						MX28_PAD_GPMI_RDY0__GPMI_READY0
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_ALE__GPMI_ALE
+						MX28_PAD_GPMI_CLE__GPMI_CLE
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				gpmi_status_cfg: gpmi-status-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDN__GPMI_RDN
+						MX28_PAD_GPMI_WRN__GPMI_WRN
+						MX28_PAD_GPMI_RESETN__GPMI_RESETN
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+				};
+
+				auart0_pins_a: auart0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+						MX28_PAD_AUART0_CTS__AUART0_CTS
+						MX28_PAD_AUART0_RTS__AUART0_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__AUART0_RX
+						MX28_PAD_AUART0_TX__AUART0_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_pins_a: auart1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+						MX28_PAD_AUART1_CTS__AUART1_CTS
+						MX28_PAD_AUART1_RTS__AUART1_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart1_2pins_a: auart1-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__AUART1_RX
+						MX28_PAD_AUART1_TX__AUART1_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_2pins_a: auart2-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__AUART2_RX
+						MX28_PAD_SSP2_MOSI__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_2pins_b: auart2-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart2_pins_a: auart2-pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__AUART2_RX
+						MX28_PAD_AUART2_TX__AUART2_TX
+						MX28_PAD_AUART2_CTS__AUART2_CTS
+						MX28_PAD_AUART2_RTS__AUART2_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_pins_a: auart3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+						MX28_PAD_AUART3_CTS__AUART3_CTS
+						MX28_PAD_AUART3_RTS__AUART3_RTS
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_2pins_a: auart3-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_MISO__AUART3_RX
+						MX28_PAD_SSP2_SS0__AUART3_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart3_2pins_b: auart3-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART3_RX__AUART3_RX
+						MX28_PAD_AUART3_TX__AUART3_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				auart4_2pins_a: auart4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP3_SCK__AUART4_TX
+						MX28_PAD_SSP3_MOSI__AUART4_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mac0_pins_a: mac0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mac1_pins_a: mac1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_CRS__ENET1_RX_EN
+						MX28_PAD_ENET0_RXD2__ENET1_RXD0
+						MX28_PAD_ENET0_RXD3__ENET1_RXD1
+						MX28_PAD_ENET0_COL__ENET1_TX_EN
+						MX28_PAD_ENET0_TXD2__ENET1_TXD0
+						MX28_PAD_ENET0_TXD3__ENET1_TXD1
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_8bit_pins_a: mmc0-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_DATA4__SSP0_D4
+						MX28_PAD_SSP0_DATA5__SSP0_D5
+						MX28_PAD_SSP0_DATA6__SSP0_D6
+						MX28_PAD_SSP0_DATA7__SSP0_D7
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_4bit_pins_a: mmc0-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA0__SSP0_D0
+						MX28_PAD_SSP0_DATA1__SSP0_D1
+						MX28_PAD_SSP0_DATA2__SSP0_D2
+						MX28_PAD_SSP0_DATA3__SSP0_D3
+						MX28_PAD_SSP0_CMD__SSP0_CMD
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc0_cd_cfg: mmc0-cd-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc0_sck_cfg: mmc0-sck-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_SCK__SSP0_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_4bit_pins_a: mmc1-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_D00__SSP1_D0
+						MX28_PAD_GPMI_D01__SSP1_D1
+						MX28_PAD_GPMI_D02__SSP1_D2
+						MX28_PAD_GPMI_D03__SSP1_D3
+						MX28_PAD_GPMI_RDY1__SSP1_CMD
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_cd_cfg: mmc1-cd-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_sck_cfg: mmc1-sck-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_WRN__SSP1_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+
+				mmc2_4bit_pins_a: mmc2-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA4__SSP2_D0
+						MX28_PAD_SSP1_SCK__SSP2_D1
+						MX28_PAD_SSP1_CMD__SSP2_D2
+						MX28_PAD_SSP0_DATA5__SSP2_D3
+						MX28_PAD_SSP0_DATA6__SSP2_CMD
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_cd_cfg: mmc2-cd-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc2_sck_cfg: mmc2-sck-cfg {
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP0_DATA7__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				i2c0_pins_a: i2c0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_I2C0_SCL__I2C0_SCL
+						MX28_PAD_I2C0_SDA__I2C0_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c0_pins_b: i2c0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_RX__I2C0_SCL
+						MX28_PAD_AUART0_TX__I2C0_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c1_pins_a: i2c1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__I2C1_SCL
+						MX28_PAD_PWM1__I2C1_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c1_pins_b: i2c1@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_CTS__I2C1_SCL
+						MX28_PAD_AUART2_RTS__I2C1_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_a: saif0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif0_pins_b: saif0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
+						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
+						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				saif1_pins_a: saif1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				pwm0_pins_a: pwm0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM0__PWM_0
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm2_pins_a: pwm2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__PWM_2
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm3_pins_a: pwm3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM3__PWM_3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm3_pins_b: pwm3@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SAIF0_MCLK__PWM_3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				pwm4_pins_a: pwm4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM4__PWM_4
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_24bit_pins_a: lcdif-24bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+						MX28_PAD_LCD_D18__LCD_D18
+						MX28_PAD_LCD_D19__LCD_D19
+						MX28_PAD_LCD_D20__LCD_D20
+						MX28_PAD_LCD_D21__LCD_D21
+						MX28_PAD_LCD_D22__LCD_D22
+						MX28_PAD_LCD_D23__LCD_D23
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_18bit_pins_a: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+						MX28_PAD_LCD_D16__LCD_D16
+						MX28_PAD_LCD_D17__LCD_D17
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_16bit_pins_a: lcdif-16bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_D00__LCD_D0
+						MX28_PAD_LCD_D01__LCD_D1
+						MX28_PAD_LCD_D02__LCD_D2
+						MX28_PAD_LCD_D03__LCD_D3
+						MX28_PAD_LCD_D04__LCD_D4
+						MX28_PAD_LCD_D05__LCD_D5
+						MX28_PAD_LCD_D06__LCD_D6
+						MX28_PAD_LCD_D07__LCD_D7
+						MX28_PAD_LCD_D08__LCD_D8
+						MX28_PAD_LCD_D09__LCD_D9
+						MX28_PAD_LCD_D10__LCD_D10
+						MX28_PAD_LCD_D11__LCD_D11
+						MX28_PAD_LCD_D12__LCD_D12
+						MX28_PAD_LCD_D13__LCD_D13
+						MX28_PAD_LCD_D14__LCD_D14
+						MX28_PAD_LCD_D15__LCD_D15
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				lcdif_sync_pins_a: lcdif-sync@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_LCD_RS__LCD_DOTCLK
+						MX28_PAD_LCD_CS__LCD_ENABLE
+						MX28_PAD_LCD_RD_E__LCD_VSYNC
+						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				can0_pins_a: can0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_RDY2__CAN0_TX
+						MX28_PAD_GPMI_RDY3__CAN0_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				can1_pins_a: can1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_GPMI_CE2N__CAN1_TX
+						MX28_PAD_GPMI_CE3N__CAN1_RX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				spi3_pins_a: spi3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART2_RX__SSP3_D4
+						MX28_PAD_AUART2_TX__SSP3_D5
+						MX28_PAD_SSP3_SCK__SSP3_SCK
+						MX28_PAD_SSP3_MOSI__SSP3_CMD
+						MX28_PAD_SSP3_MISO__SSP3_D0
+						MX28_PAD_SSP3_SS0__SSP3_D3
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_pins_a: usb0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_pins_b: usb0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb1_pins_a: usb1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				usb0_id_pins_a: usb0id@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART1_RTS__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				usb0_id_pins_b: usb0id1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__USB0_ID
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+			};
+
+			digctl: digctl@8001c000 {
+				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
+				reg = <0x8001c000 0x2000>;
+				interrupts = <89>;
+				status = "disabled";
+			};
+
+			etm: etm@80022000 {
+				reg = <0x80022000 0x2000>;
+				status = "disabled";
+			};
+
+			dma_apbx: dma-apbx@80024000 {
+				compatible = "fsl,imx28-dma-apbx";
+				reg = <0x80024000 0x2000>;
+				interrupts = <78 79 66 0
+					      80 81 68 69
+					      70 71 72 73
+					      74 75 76 77>;
+				interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+						  "saif0", "saif1", "i2c0", "i2c1",
+						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+				#dma-cells = <1>;
+				dma-channels = <16>;
+				clocks = <&clks 26>;
+			};
+
+			dcp: dcp@80028000 {
+				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
+				reg = <0x80028000 0x2000>;
+				interrupts = <52 53 54>;
+				status = "okay";
+			};
+
+			pxp: pxp@8002a000 {
+				reg = <0x8002a000 0x2000>;
+				interrupts = <39>;
+				status = "disabled";
+			};
+
+			ocotp: ocotp@8002c000 {
+				compatible = "fsl,ocotp";
+				reg = <0x8002c000 0x2000>;
+				status = "disabled";
+			};
+
+			axi-ahb@8002e000 {
+				reg = <0x8002e000 0x2000>;
+				status = "disabled";
+			};
+
+			lcdif: lcdif@80030000 {
+				compatible = "fsl,imx28-lcdif";
+				reg = <0x80030000 0x2000>;
+				interrupts = <38>;
+				clocks = <&clks 55>;
+				dmas = <&dma_apbh 13>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			can0: can@80032000 {
+				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
+				reg = <0x80032000 0x2000>;
+				interrupts = <8>;
+				clocks = <&clks 58>, <&clks 58>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can1: can@80034000 {
+				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
+				reg = <0x80034000 0x2000>;
+				interrupts = <9>;
+				clocks = <&clks 59>, <&clks 59>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			simdbg: simdbg@8003c000 {
+				reg = <0x8003c000 0x200>;
+				status = "disabled";
+			};
+
+			simgpmisel: simgpmisel@8003c200 {
+				reg = <0x8003c200 0x100>;
+				status = "disabled";
+			};
+
+			simsspsel: simsspsel@8003c300 {
+				reg = <0x8003c300 0x100>;
+				status = "disabled";
+			};
+
+			simmemsel: simmemsel@8003c400 {
+				reg = <0x8003c400 0x100>;
+				status = "disabled";
+			};
+
+			gpiomon: gpiomon@8003c500 {
+				reg = <0x8003c500 0x100>;
+				status = "disabled";
+			};
+
+			simenet: simenet@8003c700 {
+				reg = <0x8003c700 0x100>;
+				status = "disabled";
+			};
+
+			armjtag: armjtag@8003c800 {
+				reg = <0x8003c800 0x100>;
+				status = "disabled";
+			};
+		};
+
+		apbx@80040000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80040000 0x40000>;
+			ranges;
+
+			clks: clkctrl@80040000 {
+				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
+				reg = <0x80040000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			saif0: saif@80042000 {
+				compatible = "fsl,imx28-saif";
+				reg = <0x80042000 0x2000>;
+				interrupts = <59>;
+				#clock-cells = <0>;
+				clocks = <&clks 53>;
+				dmas = <&dma_apbx 4>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			power: power@80044000 {
+				reg = <0x80044000 0x2000>;
+				status = "disabled";
+			};
+
+			saif1: saif@80046000 {
+				compatible = "fsl,imx28-saif";
+				reg = <0x80046000 0x2000>;
+				interrupts = <58>;
+				clocks = <&clks 54>;
+				dmas = <&dma_apbx 5>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			lradc: lradc@80050000 {
+				compatible = "fsl,imx28-lradc";
+				reg = <0x80050000 0x2000>;
+				interrupts = <10 14 15 16 17 18 19
+						20 21 22 23 24 25>;
+				status = "disabled";
+				clocks = <&clks 41>;
+				#io-channel-cells = <1>;
+			};
+
+			spdif: spdif@80054000 {
+				reg = <0x80054000 0x2000>;
+				interrupts = <45>;
+				dmas = <&dma_apbx 2>;
+				dma-names = "tx";
+				status = "disabled";
+			};
+
+			mxs_rtc: rtc@80056000 {
+				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+				reg = <0x80056000 0x2000>;
+				interrupts = <29>;
+			};
+
+			i2c0: i2c@80058000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x80058000 0x2000>;
+				interrupts = <111>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 6>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			i2c1: i2c@8005a000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-i2c";
+				reg = <0x8005a000 0x2000>;
+				interrupts = <110>;
+				clock-frequency = <100000>;
+				dmas = <&dma_apbx 7>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			pwm: pwm@80064000 {
+				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
+				reg = <0x80064000 0x2000>;
+				clocks = <&clks 44>;
+				#pwm-cells = <2>;
+				fsl,pwm-number = <8>;
+				status = "disabled";
+			};
+
+			timer: timrot@80068000 {
+				compatible = "fsl,imx28-timrot", "fsl,timrot";
+				reg = <0x80068000 0x2000>;
+				interrupts = <48 49 50 51>;
+				clocks = <&clks 26>;
+			};
+
+			auart0: serial@8006a000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006a000 0x2000>;
+				interrupts = <112>;
+				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart1: serial@8006c000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006c000 0x2000>;
+				interrupts = <113>;
+				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart2: serial@8006e000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x8006e000 0x2000>;
+				interrupts = <114>;
+				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart3: serial@80070000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x80070000 0x2000>;
+				interrupts = <115>;
+				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			auart4: serial@80072000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+				reg = <0x80072000 0x2000>;
+				interrupts = <116>;
+				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
+				dma-names = "rx", "tx";
+				clocks = <&clks 45>;
+				status = "disabled";
+			};
+
+			duart: serial@80074000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x80074000 0x1000>;
+				interrupts = <47>;
+				clocks = <&clks 45>, <&clks 26>;
+				clock-names = "uart", "apb_pclk";
+				status = "disabled";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+				reg = <0x8007c000 0x2000>;
+				clocks = <&clks 62>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
+				reg = <0x8007e000 0x2000>;
+				clocks = <&clks 63>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x80080000 0x80000>;
+		ranges;
+
+		usb0: usb@80080000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+			reg = <0x80080000 0x10000>;
+			interrupts = <93>;
+			clocks = <&clks 60>;
+			fsl,usbphy = <&usbphy0>;
+			status = "disabled";
+		};
+
+		usb1: usb@80090000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
+			reg = <0x80090000 0x10000>;
+			interrupts = <92>;
+			clocks = <&clks 61>;
+			fsl,usbphy = <&usbphy1>;
+			status = "disabled";
+		};
+
+		dflpt: dflpt@800c0000 {
+			reg = <0x800c0000 0x10000>;
+			status = "disabled";
+		};
+
+		mac0: ethernet@800f0000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f0000 0x4000>;
+			interrupts = <101>;
+			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
+			clock-names = "ipg", "ahb", "enet_out";
+			status = "disabled";
+		};
+
+		mac1: ethernet@800f4000 {
+			compatible = "fsl,imx28-fec";
+			reg = <0x800f4000 0x4000>;
+			interrupts = <102>;
+			clocks = <&clks 57>, <&clks 57>;
+			clock-names = "ipg", "ahb";
+			status = "disabled";
+		};
+
+		etn_switch: switch@800f8000 {
+			reg = <0x800f8000 0x8000>;
+			status = "disabled";
+		};
+	};
+
+	iio_hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&lradc 8>;
+	};
+};
diff --git a/src/arm/imx31-bug.dts b/src/arm/imx31-bug.dts
new file mode 100644
index 000000000000..2424abfc9c7b
--- /dev/null
+++ b/src/arm/imx31-bug.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx31.dtsi"
+
+/ {
+	model = "Buglabs i.MX31 Bug 1.x";
+	compatible = "buglabs,imx31-bug", "fsl,imx31";
+
+	memory {
+		reg = <0x80000000 0x8000000>; /* 128M */
+	};
+};
+
+&uart5 {
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
diff --git a/src/arm/imx31.dtsi b/src/arm/imx31.dtsi
new file mode 100644
index 000000000000..c34f82581248
--- /dev/null
+++ b/src/arm/imx31.dtsi
@@ -0,0 +1,138 @@
+/*
+ * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1136";
+			device_type = "cpu";
+		};
+	};
+
+	avic: avic-interrupt-controller@60000000 {
+		compatible = "fsl,imx31-avic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x60000000 0x100000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&avic>;
+		ranges;
+
+		aips@43f00000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				interrupts = <45>;
+				clocks = <&clks 10>, <&clks 30>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks 10>, <&clks 31>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart4: serial@43fb0000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43fb0000 0x4000>;
+				clocks = <&clks 10>, <&clks 49>;
+				clock-names = "ipg", "per";
+				interrupts = <46>;
+				status = "disabled";
+			};
+
+			uart5: serial@43fb4000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x43fb4000 0x4000>;
+				interrupts = <47>;
+				clocks = <&clks 10>, <&clks 50>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		spba@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x100000>;
+			ranges;
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				interrupts = <18>;
+				clocks = <&clks 10>, <&clks 48>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			iim: iim@5001c000 {
+				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
+				reg = <0x5001c000 0x1000>;
+				interrupts = <19>;
+				clocks = <&clks 25>;
+			};
+
+			clks: ccm@53f80000{
+				compatible = "fsl,imx31-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <0 31 0x04 0 53 0x04>;
+				#clock-cells = <1>;
+			};
+		};
+
+		aips@53f00000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			gpt: timer@53f90000 {
+				compatible = "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks 10>, <&clks 22>;
+				clock-names = "ipg", "per";
+			};
+		};
+	};
+};
diff --git a/src/arm/imx35-eukrea-cpuimx35.dtsi b/src/arm/imx35-eukrea-cpuimx35.dtsi
new file mode 100644
index 000000000000..9c2b715ab8bf
--- /dev/null
+++ b/src/arm/imx35-eukrea-cpuimx35.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,cpuimx35", "fsl,imx35";
+
+	memory {
+		reg = <0x80000000 0x8000000>; /* 128M */
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsc2007: tsc2007@48 {
+		compatible = "ti,tsc2007";
+		gpios = <&gpio3 2 0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <0x2 0x8>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc2007_1>;
+		reg = <0x48>;
+		ti,x-plate-ohms = <180>;
+	};
+};
+
+&iomuxc {
+	imx35-eukrea {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
+				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
+				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
+				MX35_PAD_FEC_COL__FEC_COL		0x80000000
+				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
+				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
+				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
+				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
+				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
+				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
+				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
+				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
+				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
+				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
+				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
+				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
+				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
+				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
+				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
+			>;
+		};
+
+		pinctrl_tsc2007_1: tsc2007grp-1 {
+			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts b/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts
new file mode 100644
index 000000000000..75b036700d31
--- /dev/null
+++ b/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx35-eukrea-cpuimx35.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX35";
+	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bp1>;
+
+		bp1 {
+			label = "BP1";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+			linux,input-type = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led1>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound {
+		compatible = "eukrea,asoc-tlv320";
+		eukrea,model = "imx35-eukrea-tlv320aic23";
+		ssi-controller = <&ssi1>;
+		fsl,mux-int-port = <1>;
+		fsl,mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 24>;
+	status = "okay";
+};
+
+&i2c1 {
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&iomuxc {
+	imx35-eukrea {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
+				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
+				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
+				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
+			>;
+		};
+
+		pinctrl_bp1: bp1grp {
+			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
+			>;
+		};
+
+		pinctrl_led1: led1grp {
+			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
+		};
+
+		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
+			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+				MX35_PAD_CTS1__UART1_CTS		0x1c5
+				MX35_PAD_RTS1__UART1_RTS		0x1c5
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
+				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
+				MX35_PAD_RTS2__UART2_RTS		0x1c5
+				MX35_PAD_CTS2__UART2_CTS		0x1c5
+			>;
+		};
+	};
+};
+
+&ssi1 {
+	codec-handle = <&tlv320aic23>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbhost1 {
+	phy_type = "serial";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "otg";
+	external-vbus-divider;
+	status = "okay";
+};
diff --git a/src/arm/imx35-pdk.dts b/src/arm/imx35-pdk.dts
new file mode 100644
index 000000000000..8d715523708f
--- /dev/null
+++ b/src/arm/imx35-pdk.dts
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx35.dtsi"
+
+/ {
+	model = "Freescale i.MX35 Product Development Kit";
+	compatible = "fsl,imx35-pdk", "fsl,imx35";
+
+	memory {
+		reg = <0x80000000 0x8000000>,
+		      <0x90000000 0x8000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx35-pdk {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
+				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
+				MX35_PAD_CTS1__UART1_CTS		0x1c5
+				MX35_PAD_RTS1__UART1_RTS		0x1c5
+			>;
+		};
+	};
+};
+
+&nfc {
+	nand-bus-width = <16>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
diff --git a/src/arm/imx35-pinfunc.h b/src/arm/imx35-pinfunc.h
new file mode 100644
index 000000000000..4911f2c405fa
--- /dev/null
+++ b/src/arm/imx35-pinfunc.h
@@ -0,0 +1,970 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX35_PINFUNC_H
+#define __DTS_IMX35_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1				0x004 0x328 0x000 0x0 0x0
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2				0x004 0x328 0x000 0x1 0x0
+#define MX35_PAD_CAPTURE__CSPI2_SS1				0x004 0x328 0x7f4 0x2 0x0
+#define MX35_PAD_CAPTURE__EPIT1_EPITO				0x004 0x328 0x000 0x3 0x0
+#define MX35_PAD_CAPTURE__CCM_CLK32K				0x004 0x328 0x7d0 0x4 0x0
+#define MX35_PAD_CAPTURE__GPIO1_4				0x004 0x328 0x850 0x5 0x0
+#define MX35_PAD_COMPARE__GPT_CMPOUT1				0x008 0x32c 0x000 0x0 0x0
+#define MX35_PAD_COMPARE__GPT_CAPIN2				0x008 0x32c 0x000 0x1 0x0
+#define MX35_PAD_COMPARE__GPT_CMPOUT3				0x008 0x32c 0x000 0x2 0x0
+#define MX35_PAD_COMPARE__EPIT2_EPITO				0x008 0x32c 0x000 0x3 0x0
+#define MX35_PAD_COMPARE__GPIO1_5				0x008 0x32c 0x854 0x5 0x0
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2				0x008 0x32c 0x000 0x7 0x0
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B				0x00c 0x330 0x000 0x0 0x0
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE			0x00c 0x330 0x000 0x3 0x0
+#define MX35_PAD_WDOG_RST__GPIO1_6				0x00c 0x330 0x858 0x5 0x0
+#define MX35_PAD_GPIO1_0__GPIO1_0				0x010 0x334 0x82c 0x0 0x0
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY				0x010 0x334 0x7d4 0x1 0x0
+#define MX35_PAD_GPIO1_0__OWIRE_LINE				0x010 0x334 0x990 0x2 0x0
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0				0x010 0x334 0x000 0x7 0x0
+#define MX35_PAD_GPIO1_1__GPIO1_1				0x014 0x338 0x838 0x0 0x0
+#define MX35_PAD_GPIO1_1__PWM_PWMO				0x014 0x338 0x000 0x2 0x0
+#define MX35_PAD_GPIO1_1__CSPI1_SS2				0x014 0x338 0x7d8 0x3 0x0
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT			0x014 0x338 0x000 0x6 0x0
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1				0x014 0x338 0x000 0x7 0x0
+#define MX35_PAD_GPIO2_0__GPIO2_0				0x018 0x33c 0x868 0x0 0x0
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK			0x018 0x33c 0x000 0x1 0x0
+#define MX35_PAD_GPIO3_0__GPIO3_0				0x01c 0x340 0x8e8 0x0 0x0
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK			0x01c 0x340 0x000 0x1 0x0
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B			0x000 0x344 0x000 0x0 0x0
+#define MX35_PAD_POR_B__CCM_POR_B				0x000 0x348 0x000 0x0 0x0
+#define MX35_PAD_CLKO__CCM_CLKO					0x020 0x34c 0x000 0x0 0x0
+#define MX35_PAD_CLKO__GPIO1_8					0x020 0x34c 0x860 0x5 0x0
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0			0x000 0x350 0x000 0x0 0x0
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1			0x000 0x354 0x000 0x0 0x0
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0			0x000 0x358 0x000 0x0 0x0
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1			0x000 0x35c 0x000 0x0 0x0
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26		0x000 0x360 0x000 0x0 0x0
+#define MX35_PAD_VSTBY__CCM_VSTBY				0x024 0x364 0x000 0x0 0x0
+#define MX35_PAD_VSTBY__GPIO1_7					0x024 0x364 0x85c 0x5 0x0
+#define MX35_PAD_A0__EMI_EIM_DA_L_0				0x028 0x368 0x000 0x0 0x0
+#define MX35_PAD_A1__EMI_EIM_DA_L_1				0x02c 0x36c 0x000 0x0 0x0
+#define MX35_PAD_A2__EMI_EIM_DA_L_2				0x030 0x370 0x000 0x0 0x0
+#define MX35_PAD_A3__EMI_EIM_DA_L_3				0x034 0x374 0x000 0x0 0x0
+#define MX35_PAD_A4__EMI_EIM_DA_L_4				0x038 0x378 0x000 0x0 0x0
+#define MX35_PAD_A5__EMI_EIM_DA_L_5				0x03c 0x37c 0x000 0x0 0x0
+#define MX35_PAD_A6__EMI_EIM_DA_L_6				0x040 0x380 0x000 0x0 0x0
+#define MX35_PAD_A7__EMI_EIM_DA_L_7				0x044 0x384 0x000 0x0 0x0
+#define MX35_PAD_A8__EMI_EIM_DA_H_8				0x048 0x388 0x000 0x0 0x0
+#define MX35_PAD_A9__EMI_EIM_DA_H_9				0x04c 0x38c 0x000 0x0 0x0
+#define MX35_PAD_A10__EMI_EIM_DA_H_10				0x050 0x390 0x000 0x0 0x0
+#define MX35_PAD_MA10__EMI_MA10					0x054 0x394 0x000 0x0 0x0
+#define MX35_PAD_A11__EMI_EIM_DA_H_11				0x058 0x398 0x000 0x0 0x0
+#define MX35_PAD_A12__EMI_EIM_DA_H_12				0x05c 0x39c 0x000 0x0 0x0
+#define MX35_PAD_A13__EMI_EIM_DA_H_13				0x060 0x3a0 0x000 0x0 0x0
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14				0x064 0x3a4 0x000 0x0 0x0
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15				0x068 0x3a8 0x000 0x0 0x0
+#define MX35_PAD_A16__EMI_EIM_A_16				0x06c 0x3ac 0x000 0x0 0x0
+#define MX35_PAD_A17__EMI_EIM_A_17				0x070 0x3b0 0x000 0x0 0x0
+#define MX35_PAD_A18__EMI_EIM_A_18				0x074 0x3b4 0x000 0x0 0x0
+#define MX35_PAD_A19__EMI_EIM_A_19				0x078 0x3b8 0x000 0x0 0x0
+#define MX35_PAD_A20__EMI_EIM_A_20				0x07c 0x3bc 0x000 0x0 0x0
+#define MX35_PAD_A21__EMI_EIM_A_21				0x080 0x3c0 0x000 0x0 0x0
+#define MX35_PAD_A22__EMI_EIM_A_22				0x084 0x3c4 0x000 0x0 0x0
+#define MX35_PAD_A23__EMI_EIM_A_23				0x088 0x3c8 0x000 0x0 0x0
+#define MX35_PAD_A24__EMI_EIM_A_24				0x08c 0x3cc 0x000 0x0 0x0
+#define MX35_PAD_A25__EMI_EIM_A_25				0x090 0x3d0 0x000 0x0 0x0
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1				0x000 0x3d4 0x000 0x0 0x0
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0				0x000 0x3d8 0x000 0x0 0x0
+#define MX35_PAD_SD0__EMI_DRAM_D_0				0x000 0x3dc 0x000 0x0 0x0
+#define MX35_PAD_SD1__EMI_DRAM_D_1				0x000 0x3e0 0x000 0x0 0x0
+#define MX35_PAD_SD2__EMI_DRAM_D_2				0x000 0x3e4 0x000 0x0 0x0
+#define MX35_PAD_SD3__EMI_DRAM_D_3				0x000 0x3e8 0x000 0x0 0x0
+#define MX35_PAD_SD4__EMI_DRAM_D_4				0x000 0x3ec 0x000 0x0 0x0
+#define MX35_PAD_SD5__EMI_DRAM_D_5				0x000 0x3f0 0x000 0x0 0x0
+#define MX35_PAD_SD6__EMI_DRAM_D_6				0x000 0x3f4 0x000 0x0 0x0
+#define MX35_PAD_SD7__EMI_DRAM_D_7				0x000 0x3f8 0x000 0x0 0x0
+#define MX35_PAD_SD8__EMI_DRAM_D_8				0x000 0x3fc 0x000 0x0 0x0
+#define MX35_PAD_SD9__EMI_DRAM_D_9				0x000 0x400 0x000 0x0 0x0
+#define MX35_PAD_SD10__EMI_DRAM_D_10				0x000 0x404 0x000 0x0 0x0
+#define MX35_PAD_SD11__EMI_DRAM_D_11				0x000 0x408 0x000 0x0 0x0
+#define MX35_PAD_SD12__EMI_DRAM_D_12				0x000 0x40c 0x000 0x0 0x0
+#define MX35_PAD_SD13__EMI_DRAM_D_13				0x000 0x410 0x000 0x0 0x0
+#define MX35_PAD_SD14__EMI_DRAM_D_14				0x000 0x414 0x000 0x0 0x0
+#define MX35_PAD_SD15__EMI_DRAM_D_15				0x000 0x418 0x000 0x0 0x0
+#define MX35_PAD_SD16__EMI_DRAM_D_16				0x000 0x41c 0x000 0x0 0x0
+#define MX35_PAD_SD17__EMI_DRAM_D_17				0x000 0x420 0x000 0x0 0x0
+#define MX35_PAD_SD18__EMI_DRAM_D_18				0x000 0x424 0x000 0x0 0x0
+#define MX35_PAD_SD19__EMI_DRAM_D_19				0x000 0x428 0x000 0x0 0x0
+#define MX35_PAD_SD20__EMI_DRAM_D_20				0x000 0x42c 0x000 0x0 0x0
+#define MX35_PAD_SD21__EMI_DRAM_D_21				0x000 0x430 0x000 0x0 0x0
+#define MX35_PAD_SD22__EMI_DRAM_D_22				0x000 0x434 0x000 0x0 0x0
+#define MX35_PAD_SD23__EMI_DRAM_D_23				0x000 0x438 0x000 0x0 0x0
+#define MX35_PAD_SD24__EMI_DRAM_D_24				0x000 0x43c 0x000 0x0 0x0
+#define MX35_PAD_SD25__EMI_DRAM_D_25				0x000 0x440 0x000 0x0 0x0
+#define MX35_PAD_SD26__EMI_DRAM_D_26				0x000 0x444 0x000 0x0 0x0
+#define MX35_PAD_SD27__EMI_DRAM_D_27				0x000 0x448 0x000 0x0 0x0
+#define MX35_PAD_SD28__EMI_DRAM_D_28				0x000 0x44c 0x000 0x0 0x0
+#define MX35_PAD_SD29__EMI_DRAM_D_29				0x000 0x450 0x000 0x0 0x0
+#define MX35_PAD_SD30__EMI_DRAM_D_30				0x000 0x454 0x000 0x0 0x0
+#define MX35_PAD_SD31__EMI_DRAM_D_31				0x000 0x458 0x000 0x0 0x0
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0				0x000 0x45c 0x000 0x0 0x0
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1				0x000 0x460 0x000 0x0 0x0
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2				0x000 0x464 0x000 0x0 0x0
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3				0x000 0x468 0x000 0x0 0x0
+#define MX35_PAD_EB0__EMI_EIM_EB0_B				0x094 0x46c 0x000 0x0 0x0
+#define MX35_PAD_EB1__EMI_EIM_EB1_B				0x098 0x470 0x000 0x0 0x0
+#define MX35_PAD_OE__EMI_EIM_OE					0x09c 0x474 0x000 0x0 0x0
+#define MX35_PAD_CS0__EMI_EIM_CS0				0x0a0 0x478 0x000 0x0 0x0
+#define MX35_PAD_CS1__EMI_EIM_CS1				0x0a4 0x47c 0x000 0x0 0x0
+#define MX35_PAD_CS1__EMI_NANDF_CE3				0x0a4 0x47c 0x000 0x3 0x0
+#define MX35_PAD_CS2__EMI_EIM_CS2				0x0a8 0x480 0x000 0x0 0x0
+#define MX35_PAD_CS3__EMI_EIM_CS3				0x0ac 0x484 0x000 0x0 0x0
+#define MX35_PAD_CS4__EMI_EIM_CS4				0x0b0 0x488 0x000 0x0 0x0
+#define MX35_PAD_CS4__EMI_DTACK_B				0x0b0 0x488 0x800 0x1 0x0
+#define MX35_PAD_CS4__EMI_NANDF_CE1				0x0b0 0x488 0x000 0x3 0x0
+#define MX35_PAD_CS4__GPIO1_20					0x0b0 0x488 0x83c 0x5 0x0
+#define MX35_PAD_CS5__EMI_EIM_CS5				0x0b4 0x48c 0x000 0x0 0x0
+#define MX35_PAD_CS5__CSPI2_SS2					0x0b4 0x48c 0x7f8 0x1 0x0
+#define MX35_PAD_CS5__CSPI1_SS2					0x0b4 0x48c 0x7d8 0x2 0x1
+#define MX35_PAD_CS5__EMI_NANDF_CE2				0x0b4 0x48c 0x000 0x3 0x0
+#define MX35_PAD_CS5__GPIO1_21					0x0b4 0x48c 0x840 0x5 0x0
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0				0x0b8 0x490 0x000 0x0 0x0
+#define MX35_PAD_NF_CE0__GPIO1_22				0x0b8 0x490 0x844 0x5 0x0
+#define MX35_PAD_ECB__EMI_EIM_ECB				0x000 0x494 0x000 0x0 0x0
+#define MX35_PAD_LBA__EMI_EIM_LBA				0x0bc 0x498 0x000 0x0 0x0
+#define MX35_PAD_BCLK__EMI_EIM_BCLK				0x0c0 0x49c 0x000 0x0 0x0
+#define MX35_PAD_RW__EMI_EIM_RW					0x0c4 0x4a0 0x000 0x0 0x0
+#define MX35_PAD_RAS__EMI_DRAM_RAS				0x000 0x4a4 0x000 0x0 0x0
+#define MX35_PAD_CAS__EMI_DRAM_CAS				0x000 0x4a8 0x000 0x0 0x0
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE				0x000 0x4ac 0x000 0x0 0x0
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0			0x000 0x4b0 0x000 0x0 0x0
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1			0x000 0x4b4 0x000 0x0 0x0
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK				0x000 0x4b8 0x000 0x0 0x0
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0				0x000 0x4bc 0x000 0x0 0x0
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1				0x000 0x4c0 0x000 0x0 0x0
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2				0x000 0x4c4 0x000 0x0 0x0
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3				0x000 0x4c8 0x000 0x0 0x0
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B				0x0c8 0x4cc 0x000 0x0 0x0
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3			0x0c8 0x4cc 0x9d8 0x1 0x0
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC			0x0c8 0x4cc 0x924 0x2 0x0
+#define MX35_PAD_NFWE_B__GPIO2_18				0x0c8 0x4cc 0x88c 0x5 0x0
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0			0x0c8 0x4cc 0x000 0x7 0x0
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B				0x0cc 0x4d0 0x000 0x0 0x0
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR			0x0cc 0x4d0 0x9ec 0x1 0x0
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK				0x0cc 0x4d0 0x000 0x2 0x0
+#define MX35_PAD_NFRE_B__GPIO2_19				0x0cc 0x4d0 0x890 0x5 0x0
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1			0x0cc 0x4d0 0x000 0x7 0x0
+#define MX35_PAD_NFALE__EMI_NANDF_ALE				0x0d0 0x4d4 0x000 0x0 0x0
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP			0x0d0 0x4d4 0x000 0x1 0x0
+#define MX35_PAD_NFALE__IPU_DISPB_CS0				0x0d0 0x4d4 0x000 0x2 0x0
+#define MX35_PAD_NFALE__GPIO2_20				0x0d0 0x4d4 0x898 0x5 0x0
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2			0x0d0 0x4d4 0x000 0x7 0x0
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE				0x0d4 0x4d8 0x000 0x0 0x0
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT			0x0d4 0x4d8 0x9f0 0x1 0x0
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS			0x0d4 0x4d8 0x000 0x2 0x0
+#define MX35_PAD_NFCLE__GPIO2_21				0x0d4 0x4d8 0x89c 0x5 0x0
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3			0x0d4 0x4d8 0x000 0x7 0x0
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B				0x0d8 0x4dc 0x000 0x0 0x0
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7			0x0d8 0x4dc 0x9e8 0x1 0x0
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR				0x0d8 0x4dc 0x000 0x2 0x0
+#define MX35_PAD_NFWP_B__GPIO2_22				0x0d8 0x4dc 0x8a0 0x5 0x0
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL			0x0d8 0x4dc 0x000 0x7 0x0
+#define MX35_PAD_NFRB__EMI_NANDF_RB				0x0dc 0x4e0 0x000 0x0 0x0
+#define MX35_PAD_NFRB__IPU_DISPB_RD				0x0dc 0x4e0 0x000 0x2 0x0
+#define MX35_PAD_NFRB__GPIO2_23					0x0dc 0x4e0 0x8a4 0x5 0x0
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK				0x0dc 0x4e0 0x000 0x7 0x0
+#define MX35_PAD_D15__EMI_EIM_D_15				0x000 0x4e4 0x000 0x0 0x0
+#define MX35_PAD_D14__EMI_EIM_D_14				0x000 0x4e8 0x000 0x0 0x0
+#define MX35_PAD_D13__EMI_EIM_D_13				0x000 0x4ec 0x000 0x0 0x0
+#define MX35_PAD_D12__EMI_EIM_D_12				0x000 0x4f0 0x000 0x0 0x0
+#define MX35_PAD_D11__EMI_EIM_D_11				0x000 0x4f4 0x000 0x0 0x0
+#define MX35_PAD_D10__EMI_EIM_D_10				0x000 0x4f8 0x000 0x0 0x0
+#define MX35_PAD_D9__EMI_EIM_D_9				0x000 0x4fc 0x000 0x0 0x0
+#define MX35_PAD_D8__EMI_EIM_D_8				0x000 0x500 0x000 0x0 0x0
+#define MX35_PAD_D7__EMI_EIM_D_7				0x000 0x504 0x000 0x0 0x0
+#define MX35_PAD_D6__EMI_EIM_D_6				0x000 0x508 0x000 0x0 0x0
+#define MX35_PAD_D5__EMI_EIM_D_5				0x000 0x50c 0x000 0x0 0x0
+#define MX35_PAD_D4__EMI_EIM_D_4				0x000 0x510 0x000 0x0 0x0
+#define MX35_PAD_D3__EMI_EIM_D_3				0x000 0x514 0x000 0x0 0x0
+#define MX35_PAD_D2__EMI_EIM_D_2				0x000 0x518 0x000 0x0 0x0
+#define MX35_PAD_D1__EMI_EIM_D_1				0x000 0x51c 0x000 0x0 0x0
+#define MX35_PAD_D0__EMI_EIM_D_0				0x000 0x520 0x000 0x0 0x0
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8				0x0e0 0x524 0x000 0x0 0x0
+#define MX35_PAD_CSI_D8__KPP_COL_0				0x0e0 0x524 0x950 0x1 0x0
+#define MX35_PAD_CSI_D8__GPIO1_20				0x0e0 0x524 0x83c 0x5 0x1
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13			0x0e0 0x524 0x000 0x7 0x0
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9				0x0e4 0x528 0x000 0x0 0x0
+#define MX35_PAD_CSI_D9__KPP_COL_1				0x0e4 0x528 0x954 0x1 0x0
+#define MX35_PAD_CSI_D9__GPIO1_21				0x0e4 0x528 0x840 0x5 0x1
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14			0x0e4 0x528 0x000 0x7 0x0
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10				0x0e8 0x52c 0x000 0x0 0x0
+#define MX35_PAD_CSI_D10__KPP_COL_2				0x0e8 0x52c 0x958 0x1 0x0
+#define MX35_PAD_CSI_D10__GPIO1_22				0x0e8 0x52c 0x844 0x5 0x1
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15			0x0e8 0x52c 0x000 0x7 0x0
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11				0x0ec 0x530 0x000 0x0 0x0
+#define MX35_PAD_CSI_D11__KPP_COL_3				0x0ec 0x530 0x95c 0x1 0x0
+#define MX35_PAD_CSI_D11__GPIO1_23				0x0ec 0x530 0x000 0x5 0x0
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12				0x0f0 0x534 0x000 0x0 0x0
+#define MX35_PAD_CSI_D12__KPP_ROW_0				0x0f0 0x534 0x970 0x1 0x0
+#define MX35_PAD_CSI_D12__GPIO1_24				0x0f0 0x534 0x000 0x5 0x0
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13				0x0f4 0x538 0x000 0x0 0x0
+#define MX35_PAD_CSI_D13__KPP_ROW_1				0x0f4 0x538 0x974 0x1 0x0
+#define MX35_PAD_CSI_D13__GPIO1_25				0x0f4 0x538 0x000 0x5 0x0
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14				0x0f8 0x53c 0x000 0x0 0x0
+#define MX35_PAD_CSI_D14__KPP_ROW_2				0x0f8 0x53c 0x978 0x1 0x0
+#define MX35_PAD_CSI_D14__GPIO1_26				0x0f8 0x53c 0x000 0x5 0x0
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15				0x0fc 0x540 0x97c 0x0 0x0
+#define MX35_PAD_CSI_D15__KPP_ROW_3				0x0fc 0x540 0x000 0x1 0x0
+#define MX35_PAD_CSI_D15__GPIO1_27				0x0fc 0x540 0x000 0x5 0x0
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK				0x100 0x544 0x000 0x0 0x0
+#define MX35_PAD_CSI_MCLK__GPIO1_28				0x100 0x544 0x000 0x5 0x0
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC			0x104 0x548 0x000 0x0 0x0
+#define MX35_PAD_CSI_VSYNC__GPIO1_29				0x104 0x548 0x000 0x5 0x0
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC			0x108 0x54c 0x000 0x0 0x0
+#define MX35_PAD_CSI_HSYNC__GPIO1_30				0x108 0x54c 0x000 0x5 0x0
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK			0x10c 0x550 0x000 0x0 0x0
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31				0x10c 0x550 0x000 0x5 0x0
+#define MX35_PAD_I2C1_CLK__I2C1_SCL				0x110 0x554 0x000 0x0 0x0
+#define MX35_PAD_I2C1_CLK__GPIO2_24				0x110 0x554 0x8a8 0x5 0x0
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK			0x110 0x554 0x000 0x6 0x0
+#define MX35_PAD_I2C1_DAT__I2C1_SDA				0x114 0x558 0x000 0x0 0x0
+#define MX35_PAD_I2C1_DAT__GPIO2_25				0x114 0x558 0x8ac 0x5 0x0
+#define MX35_PAD_I2C2_CLK__I2C2_SCL				0x118 0x55c 0x000 0x0 0x0
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN				0x118 0x55c 0x000 0x1 0x0
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR			0x118 0x55c 0x000 0x2 0x0
+#define MX35_PAD_I2C2_CLK__GPIO2_26				0x118 0x55c 0x8b0 0x5 0x0
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2		0x118 0x55c 0x000 0x6 0x0
+#define MX35_PAD_I2C2_DAT__I2C2_SDA				0x11c 0x560 0x000 0x0 0x0
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN				0x11c 0x560 0x7c8 0x1 0x0
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC			0x11c 0x560 0x9f4 0x2 0x0
+#define MX35_PAD_I2C2_DAT__GPIO2_27				0x11c 0x560 0x8b4 0x5 0x0
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3		0x11c 0x560 0x000 0x6 0x0
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD				0x120 0x564 0x000 0x0 0x0
+#define MX35_PAD_STXD4__GPIO2_28				0x120 0x564 0x8b8 0x5 0x0
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0		0x120 0x564 0x000 0x7 0x0
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD				0x124 0x568 0x000 0x0 0x0
+#define MX35_PAD_SRXD4__GPIO2_29				0x124 0x568 0x8bc 0x5 0x0
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1		0x124 0x568 0x000 0x7 0x0
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC				0x128 0x56c 0x000 0x0 0x0
+#define MX35_PAD_SCK4__GPIO2_30					0x128 0x56c 0x8c4 0x5 0x0
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2			0x128 0x56c 0x000 0x7 0x0
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS			0x12c 0x570 0x000 0x0 0x0
+#define MX35_PAD_STXFS4__GPIO2_31				0x12c 0x570 0x8c8 0x5 0x0
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3		0x12c 0x570 0x000 0x7 0x0
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD				0x130 0x574 0x000 0x0 0x0
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1			0x130 0x574 0x000 0x1 0x0
+#define MX35_PAD_STXD5__CSPI2_MOSI				0x130 0x574 0x7ec 0x2 0x0
+#define MX35_PAD_STXD5__GPIO1_0					0x130 0x574 0x82c 0x5 0x1
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4		0x130 0x574 0x000 0x7 0x0
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD				0x134 0x578 0x000 0x0 0x0
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1				0x134 0x578 0x998 0x1 0x0
+#define MX35_PAD_SRXD5__CSPI2_MISO				0x134 0x578 0x7e8 0x2 0x0
+#define MX35_PAD_SRXD5__GPIO1_1					0x134 0x578 0x838 0x5 0x1
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5		0x134 0x578 0x000 0x7 0x0
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC				0x138 0x57c 0x000 0x0 0x0
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK			0x138 0x57c 0x994 0x1 0x0
+#define MX35_PAD_SCK5__CSPI2_SCLK				0x138 0x57c 0x7e0 0x2 0x0
+#define MX35_PAD_SCK5__GPIO1_2					0x138 0x57c 0x848 0x5 0x0
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6			0x138 0x57c 0x000 0x7 0x0
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS			0x13c 0x580 0x000 0x0 0x0
+#define MX35_PAD_STXFS5__CSPI2_RDY				0x13c 0x580 0x7e4 0x2 0x0
+#define MX35_PAD_STXFS5__GPIO1_3				0x13c 0x580 0x84c 0x5 0x0
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7		0x13c 0x580 0x000 0x7 0x0
+#define MX35_PAD_SCKR__ESAI_SCKR				0x140 0x584 0x000 0x0 0x0
+#define MX35_PAD_SCKR__GPIO1_4					0x140 0x584 0x850 0x5 0x1
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10			0x140 0x584 0x000 0x7 0x0
+#define MX35_PAD_FSR__ESAI_FSR					0x144 0x588 0x000 0x0 0x0
+#define MX35_PAD_FSR__GPIO1_5					0x144 0x588 0x854 0x5 0x1
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11			0x144 0x588 0x000 0x7 0x0
+#define MX35_PAD_HCKR__ESAI_HCKR				0x148 0x58c 0x000 0x0 0x0
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS				0x148 0x58c 0x000 0x1 0x0
+#define MX35_PAD_HCKR__CSPI2_SS0				0x148 0x58c 0x7f0 0x2 0x0
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE				0x148 0x58c 0x000 0x3 0x0
+#define MX35_PAD_HCKR__GPIO1_6					0x148 0x58c 0x858 0x5 0x1
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12			0x148 0x58c 0x000 0x7 0x0
+#define MX35_PAD_SCKT__ESAI_SCKT				0x14c 0x590 0x000 0x0 0x0
+#define MX35_PAD_SCKT__GPIO1_7					0x14c 0x590 0x85c 0x5 0x1
+#define MX35_PAD_SCKT__IPU_CSI_D_0				0x14c 0x590 0x930 0x6 0x0
+#define MX35_PAD_SCKT__KPP_ROW_2				0x14c 0x590 0x978 0x7 0x1
+#define MX35_PAD_FST__ESAI_FST					0x150 0x594 0x000 0x0 0x0
+#define MX35_PAD_FST__GPIO1_8					0x150 0x594 0x860 0x5 0x1
+#define MX35_PAD_FST__IPU_CSI_D_1				0x150 0x594 0x934 0x6 0x0
+#define MX35_PAD_FST__KPP_ROW_3					0x150 0x594 0x97c 0x7 0x1
+#define MX35_PAD_HCKT__ESAI_HCKT				0x154 0x598 0x000 0x0 0x0
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC				0x154 0x598 0x7a8 0x1 0x0
+#define MX35_PAD_HCKT__GPIO1_9					0x154 0x598 0x864 0x5 0x0
+#define MX35_PAD_HCKT__IPU_CSI_D_2				0x154 0x598 0x938 0x6 0x0
+#define MX35_PAD_HCKT__KPP_COL_3				0x154 0x598 0x95c 0x7 0x1
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0				0x158 0x59c 0x000 0x0 0x0
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC			0x158 0x59c 0x000 0x1 0x0
+#define MX35_PAD_TX5_RX0__CSPI2_SS2				0x158 0x59c 0x7f8 0x2 0x1
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN				0x158 0x59c 0x000 0x3 0x0
+#define MX35_PAD_TX5_RX0__UART2_DTR				0x158 0x59c 0x000 0x4 0x0
+#define MX35_PAD_TX5_RX0__GPIO1_10				0x158 0x59c 0x830 0x5 0x0
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0		0x158 0x59c 0x000 0x7 0x0
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1				0x15c 0x5a0 0x000 0x0 0x0
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS			0x15c 0x5a0 0x000 0x1 0x0
+#define MX35_PAD_TX4_RX1__CSPI2_SS3				0x15c 0x5a0 0x7fc 0x2 0x0
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN				0x15c 0x5a0 0x7cc 0x3 0x0
+#define MX35_PAD_TX4_RX1__UART2_DSR				0x15c 0x5a0 0x000 0x4 0x0
+#define MX35_PAD_TX4_RX1__GPIO1_11				0x15c 0x5a0 0x834 0x5 0x0
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3				0x15c 0x5a0 0x93c 0x6 0x0
+#define MX35_PAD_TX4_RX1__KPP_ROW_0				0x15c 0x5a0 0x970 0x7 0x1
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2				0x160 0x5a4 0x000 0x0 0x0
+#define MX35_PAD_TX3_RX2__I2C3_SCL				0x160 0x5a4 0x91c 0x1 0x0
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1				0x160 0x5a4 0x000 0x3 0x0
+#define MX35_PAD_TX3_RX2__GPIO1_12				0x160 0x5a4 0x000 0x5 0x0
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4				0x160 0x5a4 0x940 0x6 0x0
+#define MX35_PAD_TX3_RX2__KPP_ROW_1				0x160 0x5a4 0x974 0x7 0x1
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3				0x164 0x5a8 0x000 0x0 0x0
+#define MX35_PAD_TX2_RX3__I2C3_SDA				0x164 0x5a8 0x920 0x1 0x0
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2				0x164 0x5a8 0x000 0x3 0x0
+#define MX35_PAD_TX2_RX3__GPIO1_13				0x164 0x5a8 0x000 0x5 0x0
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5				0x164 0x5a8 0x944 0x6 0x0
+#define MX35_PAD_TX2_RX3__KPP_COL_0				0x164 0x5a8 0x950 0x7 0x1
+#define MX35_PAD_TX1__ESAI_TX1					0x168 0x5ac 0x000 0x0 0x0
+#define MX35_PAD_TX1__CCM_PMIC_RDY				0x168 0x5ac 0x7d4 0x1 0x1
+#define MX35_PAD_TX1__CSPI1_SS2					0x168 0x5ac 0x7d8 0x2 0x2
+#define MX35_PAD_TX1__EMI_NANDF_CE3				0x168 0x5ac 0x000 0x3 0x0
+#define MX35_PAD_TX1__UART2_RI					0x168 0x5ac 0x000 0x4 0x0
+#define MX35_PAD_TX1__GPIO1_14					0x168 0x5ac 0x000 0x5 0x0
+#define MX35_PAD_TX1__IPU_CSI_D_6				0x168 0x5ac 0x948 0x6 0x0
+#define MX35_PAD_TX1__KPP_COL_1					0x168 0x5ac 0x954 0x7 0x1
+#define MX35_PAD_TX0__ESAI_TX0					0x16c 0x5b0 0x000 0x0 0x0
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK			0x16c 0x5b0 0x994 0x1 0x1
+#define MX35_PAD_TX0__CSPI1_SS3					0x16c 0x5b0 0x7dc 0x2 0x0
+#define MX35_PAD_TX0__EMI_DTACK_B				0x16c 0x5b0 0x800 0x3 0x1
+#define MX35_PAD_TX0__UART2_DCD					0x16c 0x5b0 0x000 0x4 0x0
+#define MX35_PAD_TX0__GPIO1_15					0x16c 0x5b0 0x000 0x5 0x0
+#define MX35_PAD_TX0__IPU_CSI_D_7				0x16c 0x5b0 0x94c 0x6 0x0
+#define MX35_PAD_TX0__KPP_COL_2					0x16c 0x5b0 0x958 0x7 0x1
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI				0x170 0x5b4 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16				0x170 0x5b4 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2		0x170 0x5b4 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO				0x174 0x5b8 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_MISO__GPIO1_17				0x174 0x5b8 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3		0x174 0x5b8 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0				0x178 0x5bc 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE				0x178 0x5bc 0x990 0x1 0x1
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3				0x178 0x5bc 0x7fc 0x2 0x1
+#define MX35_PAD_CSPI1_SS0__GPIO1_18				0x178 0x5bc 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4			0x178 0x5bc 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1				0x17c 0x5c0 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO				0x17c 0x5c0 0x000 0x1 0x0
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K				0x17c 0x5c0 0x7d0 0x2 0x1
+#define MX35_PAD_CSPI1_SS1__GPIO1_19				0x17c 0x5c0 0x000 0x5 0x0
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29			0x17c 0x5c0 0x000 0x6 0x0
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5			0x17c 0x5c0 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK				0x180 0x5c4 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4				0x180 0x5c4 0x904 0x5 0x0
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30			0x180 0x5c4 0x000 0x6 0x0
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1		0x180 0x5c4 0x000 0x7 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY			0x184 0x5c8 0x000 0x0 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5				0x184 0x5c8 0x908 0x5 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31			0x184 0x5c8 0x000 0x6 0x0
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2	0x184 0x5c8 0x000 0x7 0x0
+#define MX35_PAD_RXD1__UART1_RXD_MUX				0x188 0x5cc 0x000 0x0 0x0
+#define MX35_PAD_RXD1__CSPI2_MOSI				0x188 0x5cc 0x7ec 0x1 0x1
+#define MX35_PAD_RXD1__KPP_COL_4				0x188 0x5cc 0x960 0x4 0x0
+#define MX35_PAD_RXD1__GPIO3_6					0x188 0x5cc 0x90c 0x5 0x0
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16			0x188 0x5cc 0x000 0x7 0x0
+#define MX35_PAD_TXD1__UART1_TXD_MUX				0x18c 0x5d0 0x000 0x0 0x0
+#define MX35_PAD_TXD1__CSPI2_MISO				0x18c 0x5d0 0x7e8 0x1 0x1
+#define MX35_PAD_TXD1__KPP_COL_5				0x18c 0x5d0 0x964 0x4 0x0
+#define MX35_PAD_TXD1__GPIO3_7					0x18c 0x5d0 0x910 0x5 0x0
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17			0x18c 0x5d0 0x000 0x7 0x0
+#define MX35_PAD_RTS1__UART1_RTS				0x190 0x5d4 0x000 0x0 0x0
+#define MX35_PAD_RTS1__CSPI2_SCLK				0x190 0x5d4 0x7e0 0x1 0x1
+#define MX35_PAD_RTS1__I2C3_SCL					0x190 0x5d4 0x91c 0x2 0x1
+#define MX35_PAD_RTS1__IPU_CSI_D_0				0x190 0x5d4 0x930 0x3 0x1
+#define MX35_PAD_RTS1__KPP_COL_6				0x190 0x5d4 0x968 0x4 0x0
+#define MX35_PAD_RTS1__GPIO3_8					0x190 0x5d4 0x914 0x5 0x0
+#define MX35_PAD_RTS1__EMI_NANDF_CE1				0x190 0x5d4 0x000 0x6 0x0
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18			0x190 0x5d4 0x000 0x7 0x0
+#define MX35_PAD_CTS1__UART1_CTS				0x194 0x5d8 0x000 0x0 0x0
+#define MX35_PAD_CTS1__CSPI2_RDY				0x194 0x5d8 0x7e4 0x1 0x1
+#define MX35_PAD_CTS1__I2C3_SDA					0x194 0x5d8 0x920 0x2 0x1
+#define MX35_PAD_CTS1__IPU_CSI_D_1				0x194 0x5d8 0x934 0x3 0x1
+#define MX35_PAD_CTS1__KPP_COL_7				0x194 0x5d8 0x96c 0x4 0x0
+#define MX35_PAD_CTS1__GPIO3_9					0x194 0x5d8 0x918 0x5 0x0
+#define MX35_PAD_CTS1__EMI_NANDF_CE2				0x194 0x5d8 0x000 0x6 0x0
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19			0x194 0x5d8 0x000 0x7 0x0
+#define MX35_PAD_RXD2__UART2_RXD_MUX				0x198 0x5dc 0x000 0x0 0x0
+#define MX35_PAD_RXD2__KPP_ROW_4				0x198 0x5dc 0x980 0x4 0x0
+#define MX35_PAD_RXD2__GPIO3_10					0x198 0x5dc 0x8ec 0x5 0x0
+#define MX35_PAD_TXD2__UART2_TXD_MUX				0x19c 0x5e0 0x000 0x0 0x0
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK			0x19c 0x5e0 0x994 0x1 0x2
+#define MX35_PAD_TXD2__KPP_ROW_5				0x19c 0x5e0 0x984 0x4 0x0
+#define MX35_PAD_TXD2__GPIO3_11					0x19c 0x5e0 0x8f0 0x5 0x0
+#define MX35_PAD_RTS2__UART2_RTS				0x1a0 0x5e4 0x000 0x0 0x0
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1				0x1a0 0x5e4 0x998 0x1 0x1
+#define MX35_PAD_RTS2__CAN2_RXCAN				0x1a0 0x5e4 0x7cc 0x2 0x1
+#define MX35_PAD_RTS2__IPU_CSI_D_2				0x1a0 0x5e4 0x938 0x3 0x1
+#define MX35_PAD_RTS2__KPP_ROW_6				0x1a0 0x5e4 0x988 0x4 0x0
+#define MX35_PAD_RTS2__GPIO3_12					0x1a0 0x5e4 0x8f4 0x5 0x0
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC				0x1a0 0x5e4 0x000 0x6 0x0
+#define MX35_PAD_RTS2__UART3_RXD_MUX				0x1a0 0x5e4 0x9a0 0x7 0x0
+#define MX35_PAD_CTS2__UART2_CTS				0x1a4 0x5e8 0x000 0x0 0x0
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1				0x1a4 0x5e8 0x000 0x1 0x0
+#define MX35_PAD_CTS2__CAN2_TXCAN				0x1a4 0x5e8 0x000 0x2 0x0
+#define MX35_PAD_CTS2__IPU_CSI_D_3				0x1a4 0x5e8 0x93c 0x3 0x1
+#define MX35_PAD_CTS2__KPP_ROW_7				0x1a4 0x5e8 0x98c 0x4 0x0
+#define MX35_PAD_CTS2__GPIO3_13					0x1a4 0x5e8 0x8f8 0x5 0x0
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS				0x1a4 0x5e8 0x000 0x6 0x0
+#define MX35_PAD_CTS2__UART3_TXD_MUX				0x1a4 0x5e8 0x000 0x7 0x0
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK				0x000 0x5ec 0x000 0x0 0x0
+#define MX35_PAD_TCK__SJC_TCK					0x000 0x5f0 0x000 0x0 0x0
+#define MX35_PAD_TMS__SJC_TMS					0x000 0x5f4 0x000 0x0 0x0
+#define MX35_PAD_TDI__SJC_TDI					0x000 0x5f8 0x000 0x0 0x0
+#define MX35_PAD_TDO__SJC_TDO					0x000 0x5fc 0x000 0x0 0x0
+#define MX35_PAD_TRSTB__SJC_TRSTB				0x000 0x600 0x000 0x0 0x0
+#define MX35_PAD_DE_B__SJC_DE_B					0x000 0x604 0x000 0x0 0x0
+#define MX35_PAD_SJC_MOD__SJC_MOD				0x000 0x608 0x000 0x0 0x0
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR			0x1a8 0x60c 0x000 0x0 0x0
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR			0x1a8 0x60c 0x000 0x1 0x0
+#define MX35_PAD_USBOTG_PWR__GPIO3_14				0x1a8 0x60c 0x8fc 0x5 0x0
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC			0x1ac 0x610 0x000 0x0 0x0
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC			0x1ac 0x610 0x9f4 0x1 0x1
+#define MX35_PAD_USBOTG_OC__GPIO3_15				0x1ac 0x610 0x900 0x5 0x0
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0				0x1b0 0x614 0x000 0x0 0x0
+#define MX35_PAD_LD0__GPIO2_0					0x1b0 0x614 0x868 0x5 0x1
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0			0x1b0 0x614 0x000 0x6 0x0
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1				0x1b4 0x618 0x000 0x0 0x0
+#define MX35_PAD_LD1__GPIO2_1					0x1b4 0x618 0x894 0x5 0x0
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1			0x1b4 0x618 0x000 0x6 0x0
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2				0x1b8 0x61c 0x000 0x0 0x0
+#define MX35_PAD_LD2__GPIO2_2					0x1b8 0x61c 0x8c0 0x5 0x0
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2			0x1b8 0x61c 0x000 0x6 0x0
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3				0x1bc 0x620 0x000 0x0 0x0
+#define MX35_PAD_LD3__GPIO2_3					0x1bc 0x620 0x8cc 0x5 0x0
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3			0x1bc 0x620 0x000 0x6 0x0
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4				0x1c0 0x624 0x000 0x0 0x0
+#define MX35_PAD_LD4__GPIO2_4					0x1c0 0x624 0x8d0 0x5 0x0
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4			0x1c0 0x624 0x000 0x6 0x0
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5				0x1c4 0x628 0x000 0x0 0x0
+#define MX35_PAD_LD5__GPIO2_5					0x1c4 0x628 0x8d4 0x5 0x0
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5			0x1c4 0x628 0x000 0x6 0x0
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6				0x1c8 0x62c 0x000 0x0 0x0
+#define MX35_PAD_LD6__GPIO2_6					0x1c8 0x62c 0x8d8 0x5 0x0
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6			0x1c8 0x62c 0x000 0x6 0x0
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7				0x1cc 0x630 0x000 0x0 0x0
+#define MX35_PAD_LD7__GPIO2_7					0x1cc 0x630 0x8dc 0x5 0x0
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7			0x1cc 0x630 0x000 0x6 0x0
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8				0x1d0 0x634 0x000 0x0 0x0
+#define MX35_PAD_LD8__GPIO2_8					0x1d0 0x634 0x8e0 0x5 0x0
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			0x1d0 0x634 0x000 0x6 0x0
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9				0x1d4 0x638 0x000 0x0 0x0
+#define MX35_PAD_LD9__GPIO2_9					0x1d4 0x638 0x8e4 0x5 0x0
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			0x1d4 0x638 0x000 0x6 0x0
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10				0x1d8 0x63c 0x000 0x0 0x0
+#define MX35_PAD_LD10__GPIO2_10					0x1d8 0x63c 0x86c 0x5 0x0
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10			0x1d8 0x63c 0x000 0x6 0x0
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11				0x1dc 0x640 0x000 0x0 0x0
+#define MX35_PAD_LD11__GPIO2_11					0x1dc 0x640 0x870 0x5 0x0
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11			0x1dc 0x640 0x000 0x6 0x0
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4			0x1dc 0x640 0x000 0x7 0x0
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12				0x1e0 0x644 0x000 0x0 0x0
+#define MX35_PAD_LD12__GPIO2_12					0x1e0 0x644 0x874 0x5 0x0
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12			0x1e0 0x644 0x000 0x6 0x0
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5			0x1e0 0x644 0x000 0x7 0x0
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13				0x1e4 0x648 0x000 0x0 0x0
+#define MX35_PAD_LD13__GPIO2_13					0x1e4 0x648 0x878 0x5 0x0
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13			0x1e4 0x648 0x000 0x6 0x0
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6			0x1e4 0x648 0x000 0x7 0x0
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14				0x1e8 0x64c 0x000 0x0 0x0
+#define MX35_PAD_LD14__GPIO2_14					0x1e8 0x64c 0x87c 0x5 0x0
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0		0x1e8 0x64c 0x000 0x6 0x0
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7			0x1e8 0x64c 0x000 0x7 0x0
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15				0x1ec 0x650 0x000 0x0 0x0
+#define MX35_PAD_LD15__GPIO2_15					0x1ec 0x650 0x880 0x5 0x0
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1		0x1ec 0x650 0x000 0x6 0x0
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8			0x1ec 0x650 0x000 0x7 0x0
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16				0x1f0 0x654 0x000 0x0 0x0
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC			0x1f0 0x654 0x928 0x2 0x0
+#define MX35_PAD_LD16__GPIO2_16					0x1f0 0x654 0x884 0x5 0x0
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2		0x1f0 0x654 0x000 0x6 0x0
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9			0x1f0 0x654 0x000 0x7 0x0
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17				0x1f4 0x658 0x000 0x0 0x0
+#define MX35_PAD_LD17__IPU_DISPB_CS2				0x1f4 0x658 0x000 0x2 0x0
+#define MX35_PAD_LD17__GPIO2_17					0x1f4 0x658 0x888 0x5 0x0
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3		0x1f4 0x658 0x000 0x6 0x0
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10			0x1f4 0x658 0x000 0x7 0x0
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18				0x1f8 0x65c 0x000 0x0 0x0
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC			0x1f8 0x65c 0x924 0x1 0x1
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC			0x1f8 0x65c 0x928 0x2 0x1
+#define MX35_PAD_LD18__ESDHC3_CMD				0x1f8 0x65c 0x818 0x3 0x0
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3			0x1f8 0x65c 0x9b0 0x4 0x0
+#define MX35_PAD_LD18__GPIO3_24					0x1f8 0x65c 0x000 0x5 0x0
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4		0x1f8 0x65c 0x000 0x6 0x0
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11			0x1f8 0x65c 0x000 0x7 0x0
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19				0x1fc 0x660 0x000 0x0 0x0
+#define MX35_PAD_LD19__IPU_DISPB_BCLK				0x1fc 0x660 0x000 0x1 0x0
+#define MX35_PAD_LD19__IPU_DISPB_CS1				0x1fc 0x660 0x000 0x2 0x0
+#define MX35_PAD_LD19__ESDHC3_CLK				0x1fc 0x660 0x814 0x3 0x0
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR			0x1fc 0x660 0x9c4 0x4 0x0
+#define MX35_PAD_LD19__GPIO3_25					0x1fc 0x660 0x000 0x5 0x0
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5		0x1fc 0x660 0x000 0x6 0x0
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12			0x1fc 0x660 0x000 0x7 0x0
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20				0x200 0x664 0x000 0x0 0x0
+#define MX35_PAD_LD20__IPU_DISPB_CS0				0x200 0x664 0x000 0x1 0x0
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK				0x200 0x664 0x000 0x2 0x0
+#define MX35_PAD_LD20__ESDHC3_DAT0				0x200 0x664 0x81c 0x3 0x0
+#define MX35_PAD_LD20__GPIO3_26					0x200 0x664 0x000 0x5 0x0
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3		0x200 0x664 0x000 0x6 0x0
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13			0x200 0x664 0x000 0x7 0x0
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21				0x204 0x668 0x000 0x0 0x0
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS				0x204 0x668 0x000 0x1 0x0
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS				0x204 0x668 0x000 0x2 0x0
+#define MX35_PAD_LD21__ESDHC3_DAT1				0x204 0x668 0x820 0x3 0x0
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP			0x204 0x668 0x000 0x4 0x0
+#define MX35_PAD_LD21__GPIO3_27					0x204 0x668 0x000 0x5 0x0
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x204 0x668 0x000 0x6 0x0
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14			0x204 0x668 0x000 0x7 0x0
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22				0x208 0x66c 0x000 0x0 0x0
+#define MX35_PAD_LD22__IPU_DISPB_WR				0x208 0x66c 0x000 0x1 0x0
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I				0x208 0x66c 0x92c 0x2 0x0
+#define MX35_PAD_LD22__ESDHC3_DAT2				0x208 0x66c 0x824 0x3 0x0
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT			0x208 0x66c 0x9c8 0x4 0x0
+#define MX35_PAD_LD22__GPIO3_28					0x208 0x66c 0x000 0x5 0x0
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR			0x208 0x66c 0x000 0x6 0x0
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL				0x208 0x66c 0x000 0x7 0x0
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23				0x20c 0x670 0x000 0x0 0x0
+#define MX35_PAD_LD23__IPU_DISPB_RD				0x20c 0x670 0x000 0x1 0x0
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO			0x20c 0x670 0x92c 0x2 0x1
+#define MX35_PAD_LD23__ESDHC3_DAT3				0x20c 0x670 0x828 0x3 0x0
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7			0x20c 0x670 0x9c0 0x4 0x0
+#define MX35_PAD_LD23__GPIO3_29					0x20c 0x670 0x000 0x5 0x0
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS			0x20c 0x670 0x000 0x6 0x0
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK				0x20c 0x670 0x000 0x7 0x0
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC			0x210 0x674 0x000 0x0 0x0
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO			0x210 0x674 0x92c 0x2 0x2
+#define MX35_PAD_D3_HSYNC__GPIO3_30				0x210 0x674 0x000 0x5 0x0
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE		0x210 0x674 0x000 0x6 0x0
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15			0x210 0x674 0x000 0x7 0x0
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK			0x214 0x678 0x000 0x0 0x0
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK			0x214 0x678 0x000 0x2 0x0
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31				0x214 0x678 0x000 0x5 0x0
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0	0x214 0x678 0x000 0x6 0x0
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16		0x214 0x678 0x000 0x7 0x0
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY			0x218 0x67c 0x000 0x0 0x0
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O			0x218 0x67c 0x000 0x2 0x0
+#define MX35_PAD_D3_DRDY__GPIO1_0				0x218 0x67c 0x82c 0x5 0x2
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1		0x218 0x67c 0x000 0x6 0x0
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17			0x218 0x67c 0x000 0x7 0x0
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR			0x21c 0x680 0x000 0x0 0x0
+#define MX35_PAD_CONTRAST__GPIO1_1				0x21c 0x680 0x838 0x5 0x2
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2	0x21c 0x680 0x000 0x6 0x0
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18			0x21c 0x680 0x000 0x7 0x0
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC			0x220 0x684 0x000 0x0 0x0
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1			0x220 0x684 0x000 0x2 0x0
+#define MX35_PAD_D3_VSYNC__GPIO1_2				0x220 0x684 0x848 0x5 0x1
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD			0x220 0x684 0x000 0x6 0x0
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19			0x220 0x684 0x000 0x7 0x0
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV			0x224 0x688 0x000 0x0 0x0
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS			0x224 0x688 0x000 0x2 0x0
+#define MX35_PAD_D3_REV__GPIO1_3				0x224 0x688 0x84c 0x5 0x1
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB			0x224 0x688 0x000 0x6 0x0
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20			0x224 0x688 0x000 0x7 0x0
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS			0x228 0x68c 0x000 0x0 0x0
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2				0x228 0x68c 0x000 0x2 0x0
+#define MX35_PAD_D3_CLS__GPIO1_4				0x228 0x68c 0x850 0x5 0x2
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0		0x228 0x68c 0x000 0x6 0x0
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21			0x228 0x68c 0x000 0x7 0x0
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL			0x22c 0x690 0x000 0x0 0x0
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC			0x22c 0x690 0x928 0x2 0x2
+#define MX35_PAD_D3_SPL__GPIO1_5				0x22c 0x690 0x854 0x5 0x2
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1		0x22c 0x690 0x000 0x6 0x0
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22			0x22c 0x690 0x000 0x7 0x0
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD				0x230 0x694 0x000 0x0 0x0
+#define MX35_PAD_SD1_CMD__MSHC_SCLK				0x230 0x694 0x000 0x1 0x0
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC			0x230 0x694 0x924 0x3 0x2
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4			0x230 0x694 0x9b4 0x4 0x0
+#define MX35_PAD_SD1_CMD__GPIO1_6				0x230 0x694 0x858 0x5 0x2
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL			0x230 0x694 0x000 0x7 0x0
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK				0x234 0x698 0x000 0x0 0x0
+#define MX35_PAD_SD1_CLK__MSHC_BS				0x234 0x698 0x000 0x1 0x0
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK			0x234 0x698 0x000 0x3 0x0
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5			0x234 0x698 0x9b8 0x4 0x0
+#define MX35_PAD_SD1_CLK__GPIO1_7				0x234 0x698 0x85c 0x5 0x2
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK			0x234 0x698 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0				0x238 0x69c 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0				0x238 0x69c 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0			0x238 0x69c 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6		0x238 0x69c 0x9bc 0x4 0x0
+#define MX35_PAD_SD1_DATA0__GPIO1_8				0x238 0x69c 0x860 0x5 0x2
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23			0x238 0x69c 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1				0x23c 0x6a0 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1				0x23c 0x6a0 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS			0x23c 0x6a0 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0		0x23c 0x6a0 0x9a4 0x4 0x0
+#define MX35_PAD_SD1_DATA1__GPIO1_9				0x23c 0x6a0 0x864 0x5 0x1
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24			0x23c 0x6a0 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2				0x240 0x6a4 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2				0x240 0x6a4 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR			0x240 0x6a4 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1		0x240 0x6a4 0x9a8 0x4 0x0
+#define MX35_PAD_SD1_DATA2__GPIO1_10				0x240 0x6a4 0x830 0x5 0x1
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25			0x240 0x6a4 0x000 0x7 0x0
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3				0x244 0x6a8 0x000 0x0 0x0
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3				0x244 0x6a8 0x000 0x1 0x0
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD			0x244 0x6a8 0x000 0x3 0x0
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2		0x244 0x6a8 0x9ac 0x4 0x0
+#define MX35_PAD_SD1_DATA3__GPIO1_11				0x244 0x6a8 0x834 0x5 0x1
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26			0x244 0x6a8 0x000 0x7 0x0
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD				0x248 0x6ac 0x000 0x0 0x0
+#define MX35_PAD_SD2_CMD__I2C3_SCL				0x248 0x6ac 0x91c 0x1 0x2
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4				0x248 0x6ac 0x804 0x2 0x0
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2				0x248 0x6ac 0x938 0x3 0x2
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4			0x248 0x6ac 0x9dc 0x4 0x0
+#define MX35_PAD_SD2_CMD__GPIO2_0				0x248 0x6ac 0x868 0x5 0x2
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1			0x248 0x6ac 0x000 0x6 0x0
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC			0x248 0x6ac 0x928 0x7 0x3
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK				0x24c 0x6b0 0x000 0x0 0x0
+#define MX35_PAD_SD2_CLK__I2C3_SDA				0x24c 0x6b0 0x920 0x1 0x2
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5				0x24c 0x6b0 0x808 0x2 0x0
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3				0x24c 0x6b0 0x93c 0x3 0x2
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5			0x24c 0x6b0 0x9e0 0x4 0x0
+#define MX35_PAD_SD2_CLK__GPIO2_1				0x24c 0x6b0 0x894 0x5 0x1
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1			0x24c 0x6b0 0x998 0x6 0x2
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2				0x24c 0x6b0 0x000 0x7 0x0
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0				0x250 0x6b4 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX			0x250 0x6b4 0x9a0 0x1 0x1
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6				0x250 0x6b4 0x80c 0x2 0x0
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4				0x250 0x6b4 0x940 0x3 0x1
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6		0x250 0x6b4 0x9e4 0x4 0x0
+#define MX35_PAD_SD2_DATA0__GPIO2_2				0x250 0x6b4 0x8c0 0x5 0x1
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK			0x250 0x6b4 0x994 0x6 0x3
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1				0x254 0x6b8 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX			0x254 0x6b8 0x000 0x1 0x0
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7				0x254 0x6b8 0x810 0x2 0x0
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5				0x254 0x6b8 0x944 0x3 0x1
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0		0x254 0x6b8 0x9cc 0x4 0x0
+#define MX35_PAD_SD2_DATA1__GPIO2_3				0x254 0x6b8 0x8cc 0x5 0x1
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2				0x258 0x6bc 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA2__UART3_RTS				0x258 0x6bc 0x99c 0x1 0x0
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN				0x258 0x6bc 0x7c8 0x2 0x1
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6				0x258 0x6bc 0x948 0x3 0x1
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1		0x258 0x6bc 0x9d0 0x4 0x0
+#define MX35_PAD_SD2_DATA2__GPIO2_4				0x258 0x6bc 0x8d0 0x5 0x1
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3				0x25c 0x6c0 0x000 0x0 0x0
+#define MX35_PAD_SD2_DATA3__UART3_CTS				0x25c 0x6c0 0x000 0x1 0x0
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN				0x25c 0x6c0 0x000 0x2 0x0
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7				0x25c 0x6c0 0x94c 0x3 0x1
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2		0x25c 0x6c0 0x9d4 0x4 0x0
+#define MX35_PAD_SD2_DATA3__GPIO2_5				0x25c 0x6c0 0x8d4 0x5 0x1
+#define MX35_PAD_ATA_CS0__ATA_CS0				0x260 0x6c4 0x000 0x0 0x0
+#define MX35_PAD_ATA_CS0__CSPI1_SS3				0x260 0x6c4 0x7dc 0x1 0x1
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1				0x260 0x6c4 0x000 0x3 0x0
+#define MX35_PAD_ATA_CS0__GPIO2_6				0x260 0x6c4 0x8d8 0x5 0x1
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0				0x260 0x6c4 0x000 0x6 0x0
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0		0x260 0x6c4 0x000 0x7 0x0
+#define MX35_PAD_ATA_CS1__ATA_CS1				0x264 0x6c8 0x000 0x0 0x0
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2				0x264 0x6c8 0x000 0x3 0x0
+#define MX35_PAD_ATA_CS1__CSPI2_SS0				0x264 0x6c8 0x7f0 0x4 0x1
+#define MX35_PAD_ATA_CS1__GPIO2_7				0x264 0x6c8 0x8dc 0x5 0x1
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1				0x264 0x6c8 0x000 0x6 0x0
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1		0x264 0x6c8 0x000 0x7 0x0
+#define MX35_PAD_ATA_DIOR__ATA_DIOR				0x268 0x6cc 0x000 0x0 0x0
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0				0x268 0x6cc 0x81c 0x1 0x1
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR			0x268 0x6cc 0x9c4 0x2 0x1
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0			0x268 0x6cc 0x000 0x3 0x0
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1				0x268 0x6cc 0x7f4 0x4 0x1
+#define MX35_PAD_ATA_DIOR__GPIO2_8				0x268 0x6cc 0x8e0 0x5 0x1
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2				0x268 0x6cc 0x000 0x6 0x0
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2		0x268 0x6cc 0x000 0x7 0x0
+#define MX35_PAD_ATA_DIOW__ATA_DIOW				0x26c 0x6d0 0x000 0x0 0x0
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1				0x26c 0x6d0 0x820 0x1 0x1
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP			0x26c 0x6d0 0x000 0x2 0x0
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1			0x26c 0x6d0 0x000 0x3 0x0
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI				0x26c 0x6d0 0x7ec 0x4 0x2
+#define MX35_PAD_ATA_DIOW__GPIO2_9				0x26c 0x6d0 0x8e4 0x5 0x1
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3				0x26c 0x6d0 0x000 0x6 0x0
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3		0x26c 0x6d0 0x000 0x7 0x0
+#define MX35_PAD_ATA_DMACK__ATA_DMACK				0x270 0x6d4 0x000 0x0 0x0
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2				0x270 0x6d4 0x824 0x1 0x1
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT			0x270 0x6d4 0x9c8 0x2 0x1
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO				0x270 0x6d4 0x7e8 0x4 0x2
+#define MX35_PAD_ATA_DMACK__GPIO2_10				0x270 0x6d4 0x86c 0x5 0x1
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4				0x270 0x6d4 0x000 0x6 0x0
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0		0x270 0x6d4 0x000 0x7 0x0
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B			0x274 0x6d8 0x000 0x0 0x0
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3			0x274 0x6d8 0x828 0x1 0x1
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0		0x274 0x6d8 0x9a4 0x2 0x1
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O			0x274 0x6d8 0x000 0x3 0x0
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY				0x274 0x6d8 0x7e4 0x4 0x2
+#define MX35_PAD_ATA_RESET_B__GPIO2_11				0x274 0x6d8 0x870 0x5 0x1
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5			0x274 0x6d8 0x000 0x6 0x0
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1		0x274 0x6d8 0x000 0x7 0x0
+#define MX35_PAD_ATA_IORDY__ATA_IORDY				0x278 0x6dc 0x000 0x0 0x0
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4				0x278 0x6dc 0x000 0x1 0x0
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1		0x278 0x6dc 0x9a8 0x2 0x1
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO			0x278 0x6dc 0x92c 0x3 0x3
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4				0x278 0x6dc 0x000 0x4 0x0
+#define MX35_PAD_ATA_IORDY__GPIO2_12				0x278 0x6dc 0x874 0x5 0x1
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6				0x278 0x6dc 0x000 0x6 0x0
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2		0x278 0x6dc 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0				0x27c 0x6e0 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5				0x27c 0x6e0 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2		0x27c 0x6e0 0x9ac 0x2 0x1
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC			0x27c 0x6e0 0x928 0x3 0x4
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5				0x27c 0x6e0 0x000 0x4 0x0
+#define MX35_PAD_ATA_DATA0__GPIO2_13				0x27c 0x6e0 0x878 0x5 0x1
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7				0x27c 0x6e0 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3		0x27c 0x6e0 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1				0x280 0x6e4 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6				0x280 0x6e4 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3		0x280 0x6e4 0x9b0 0x2 0x1
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK			0x280 0x6e4 0x000 0x3 0x0
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6				0x280 0x6e4 0x000 0x4 0x0
+#define MX35_PAD_ATA_DATA1__GPIO2_14				0x280 0x6e4 0x87c 0x5 0x1
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8				0x280 0x6e4 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27			0x280 0x6e4 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2				0x284 0x6e8 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7				0x284 0x6e8 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4		0x284 0x6e8 0x9b4 0x2 0x1
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS			0x284 0x6e8 0x000 0x3 0x0
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7				0x284 0x6e8 0x000 0x4 0x0
+#define MX35_PAD_ATA_DATA2__GPIO2_15				0x284 0x6e8 0x880 0x5 0x1
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9				0x284 0x6e8 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28			0x284 0x6e8 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3				0x288 0x6ec 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK				0x288 0x6ec 0x814 0x1 0x1
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5		0x288 0x6ec 0x9b8 0x2 0x1
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK				0x288 0x6ec 0x7e0 0x4 0x2
+#define MX35_PAD_ATA_DATA3__GPIO2_16				0x288 0x6ec 0x884 0x5 0x1
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10			0x288 0x6ec 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29			0x288 0x6ec 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4				0x28c 0x6f0 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD				0x28c 0x6f0 0x818 0x1 0x1
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6		0x28c 0x6f0 0x9bc 0x2 0x1
+#define MX35_PAD_ATA_DATA4__GPIO2_17				0x28c 0x6f0 0x888 0x5 0x1
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11			0x28c 0x6f0 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30			0x28c 0x6f0 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5				0x290 0x6f4 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7		0x290 0x6f4 0x9c0 0x2 0x1
+#define MX35_PAD_ATA_DATA5__GPIO2_18				0x290 0x6f4 0x88c 0x5 0x1
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12			0x290 0x6f4 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31			0x290 0x6f4 0x000 0x7 0x0
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6				0x294 0x6f8 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN				0x294 0x6f8 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA6__UART1_DTR				0x294 0x6f8 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD			0x294 0x6f8 0x7b4 0x3 0x0
+#define MX35_PAD_ATA_DATA6__GPIO2_19				0x294 0x6f8 0x890 0x5 0x1
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13			0x294 0x6f8 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7				0x298 0x6fc 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN				0x298 0x6fc 0x7c8 0x1 0x2
+#define MX35_PAD_ATA_DATA7__UART1_DSR				0x298 0x6fc 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD			0x298 0x6fc 0x7b0 0x3 0x0
+#define MX35_PAD_ATA_DATA7__GPIO2_20				0x298 0x6fc 0x898 0x5 0x1
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14			0x298 0x6fc 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8				0x29c 0x700 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA8__UART3_RTS				0x29c 0x700 0x99c 0x1 0x1
+#define MX35_PAD_ATA_DATA8__UART1_RI				0x29c 0x700 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC			0x29c 0x700 0x7c0 0x3 0x0
+#define MX35_PAD_ATA_DATA8__GPIO2_21				0x29c 0x700 0x89c 0x5 0x1
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15			0x29c 0x700 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9				0x2a0 0x704 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA9__UART3_CTS				0x2a0 0x704 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA9__UART1_DCD				0x2a0 0x704 0x000 0x2 0x0
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS			0x2a0 0x704 0x7c4 0x3 0x0
+#define MX35_PAD_ATA_DATA9__GPIO2_22				0x2a0 0x704 0x8a0 0x5 0x1
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16			0x2a0 0x704 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10			0x2a4 0x708 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX			0x2a4 0x708 0x9a0 0x1 0x2
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC			0x2a4 0x708 0x7b8 0x3 0x0
+#define MX35_PAD_ATA_DATA10__GPIO2_23				0x2a4 0x708 0x8a4 0x5 0x1
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17			0x2a4 0x708 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11			0x2a8 0x70c 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX			0x2a8 0x70c 0x000 0x1 0x0
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS			0x2a8 0x70c 0x7bc 0x3 0x0
+#define MX35_PAD_ATA_DATA11__GPIO2_24				0x2a8 0x70c 0x8a8 0x5 0x1
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18			0x2a8 0x70c 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12			0x2ac 0x710 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA12__I2C3_SCL				0x2ac 0x710 0x91c 0x1 0x3
+#define MX35_PAD_ATA_DATA12__GPIO2_25				0x2ac 0x710 0x8ac 0x5 0x1
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19			0x2ac 0x710 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13			0x2b0 0x714 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA13__I2C3_SDA				0x2b0 0x714 0x920 0x1 0x3
+#define MX35_PAD_ATA_DATA13__GPIO2_26				0x2b0 0x714 0x8b0 0x5 0x1
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20			0x2b0 0x714 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14			0x2b4 0x718 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0			0x2b4 0x718 0x930 0x1 0x2
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0				0x2b4 0x718 0x970 0x3 0x2
+#define MX35_PAD_ATA_DATA14__GPIO2_27				0x2b4 0x718 0x8b4 0x5 0x1
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21			0x2b4 0x718 0x000 0x6 0x0
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15			0x2b8 0x71c 0x000 0x0 0x0
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1			0x2b8 0x71c 0x934 0x1 0x2
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1				0x2b8 0x71c 0x974 0x3 0x2
+#define MX35_PAD_ATA_DATA15__GPIO2_28				0x2b8 0x71c 0x8b8 0x5 0x1
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22			0x2b8 0x71c 0x000 0x6 0x0
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ				0x2bc 0x720 0x000 0x0 0x0
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2				0x2bc 0x720 0x938 0x1 0x3
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2				0x2bc 0x720 0x978 0x3 0x2
+#define MX35_PAD_ATA_INTRQ__GPIO2_29				0x2bc 0x720 0x8bc 0x5 0x1
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23			0x2bc 0x720 0x000 0x6 0x0
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN			0x2c0 0x724 0x000 0x0 0x0
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3			0x2c0 0x724 0x93c 0x1 0x3
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3				0x2c0 0x724 0x97c 0x3 0x2
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30				0x2c0 0x724 0x8c4 0x5 0x1
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24			0x2c0 0x724 0x000 0x6 0x0
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ				0x2c4 0x728 0x000 0x0 0x0
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4				0x2c4 0x728 0x940 0x1 0x2
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0				0x2c4 0x728 0x950 0x3 0x2
+#define MX35_PAD_ATA_DMARQ__GPIO2_31				0x2c4 0x728 0x8c8 0x5 0x1
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25			0x2c4 0x728 0x000 0x6 0x0
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4			0x2c4 0x728 0x000 0x7 0x0
+#define MX35_PAD_ATA_DA0__ATA_DA_0				0x2c8 0x72c 0x000 0x0 0x0
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5				0x2c8 0x72c 0x944 0x1 0x2
+#define MX35_PAD_ATA_DA0__KPP_COL_1				0x2c8 0x72c 0x954 0x3 0x2
+#define MX35_PAD_ATA_DA0__GPIO3_0				0x2c8 0x72c 0x8e8 0x5 0x1
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26				0x2c8 0x72c 0x000 0x6 0x0
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5			0x2c8 0x72c 0x000 0x7 0x0
+#define MX35_PAD_ATA_DA1__ATA_DA_1				0x2cc 0x730 0x000 0x0 0x0
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6				0x2cc 0x730 0x948 0x1 0x2
+#define MX35_PAD_ATA_DA1__KPP_COL_2				0x2cc 0x730 0x958 0x3 0x2
+#define MX35_PAD_ATA_DA1__GPIO3_1				0x2cc 0x730 0x000 0x5 0x0
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27				0x2cc 0x730 0x000 0x6 0x0
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6			0x2cc 0x730 0x000 0x7 0x0
+#define MX35_PAD_ATA_DA2__ATA_DA_2				0x2d0 0x734 0x000 0x0 0x0
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7				0x2d0 0x734 0x94c 0x1 0x2
+#define MX35_PAD_ATA_DA2__KPP_COL_3				0x2d0 0x734 0x95c 0x3 0x2
+#define MX35_PAD_ATA_DA2__GPIO3_2				0x2d0 0x734 0x000 0x5 0x0
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28				0x2d0 0x734 0x000 0x6 0x0
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7			0x2d0 0x734 0x000 0x7 0x0
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK				0x2d4 0x738 0x000 0x0 0x0
+#define MX35_PAD_MLB_CLK__GPIO3_3				0x2d4 0x738 0x000 0x5 0x0
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT				0x2d8 0x73c 0x000 0x0 0x0
+#define MX35_PAD_MLB_DAT__GPIO3_4				0x2d8 0x73c 0x904 0x5 0x1
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG				0x2dc 0x740 0x000 0x0 0x0
+#define MX35_PAD_MLB_SIG__GPIO3_5				0x2dc 0x740 0x908 0x5 0x1
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK				0x2e0 0x744 0x000 0x0 0x0
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4			0x2e0 0x744 0x804 0x1 0x1
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX			0x2e0 0x744 0x9a0 0x2 0x3
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR			0x2e0 0x744 0x9ec 0x3 0x1
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI				0x2e0 0x744 0x7ec 0x4 0x3
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6				0x2e0 0x744 0x90c 0x5 0x1
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC		0x2e0 0x744 0x928 0x6 0x5
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0		0x2e0 0x744 0x000 0x7 0x0
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK				0x2e4 0x748 0x000 0x0 0x0
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5			0x2e4 0x748 0x808 0x1 0x1
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX			0x2e4 0x748 0x000 0x2 0x0
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP			0x2e4 0x748 0x000 0x3 0x0
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO				0x2e4 0x748 0x7e8 0x4 0x3
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7				0x2e4 0x748 0x910 0x5 0x1
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I			0x2e4 0x748 0x92c 0x6 0x4
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1		0x2e4 0x748 0x000 0x7 0x0
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV				0x2e8 0x74c 0x000 0x0 0x0
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6				0x2e8 0x74c 0x80c 0x1 0x1
+#define MX35_PAD_FEC_RX_DV__UART3_RTS				0x2e8 0x74c 0x99c 0x2 0x2
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT			0x2e8 0x74c 0x9f0 0x3 0x1
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK				0x2e8 0x74c 0x7e0 0x4 0x3
+#define MX35_PAD_FEC_RX_DV__GPIO3_8				0x2e8 0x74c 0x914 0x5 0x1
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK			0x2e8 0x74c 0x000 0x6 0x0
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2		0x2e8 0x74c 0x000 0x7 0x0
+#define MX35_PAD_FEC_COL__FEC_COL				0x2ec 0x750 0x000 0x0 0x0
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7				0x2ec 0x750 0x810 0x1 0x1
+#define MX35_PAD_FEC_COL__UART3_CTS				0x2ec 0x750 0x000 0x2 0x0
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0			0x2ec 0x750 0x9cc 0x3 0x1
+#define MX35_PAD_FEC_COL__CSPI2_RDY				0x2ec 0x750 0x7e4 0x4 0x3
+#define MX35_PAD_FEC_COL__GPIO3_9				0x2ec 0x750 0x918 0x5 0x1
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS			0x2ec 0x750 0x000 0x6 0x0
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3			0x2ec 0x750 0x000 0x7 0x0
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0			0x2f0 0x754 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO				0x2f0 0x754 0x000 0x1 0x0
+#define MX35_PAD_FEC_RDATA0__UART3_DTR				0x2f0 0x754 0x000 0x2 0x0
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1		0x2f0 0x754 0x9d0 0x3 0x1
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0				0x2f0 0x754 0x7f0 0x4 0x2
+#define MX35_PAD_FEC_RDATA0__GPIO3_10				0x2f0 0x754 0x8ec 0x5 0x1
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1			0x2f0 0x754 0x000 0x6 0x0
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4		0x2f0 0x754 0x000 0x7 0x0
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0			0x2f4 0x758 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1			0x2f4 0x758 0x000 0x1 0x0
+#define MX35_PAD_FEC_TDATA0__UART3_DSR				0x2f4 0x758 0x000 0x2 0x0
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2		0x2f4 0x758 0x9d4 0x3 0x1
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1				0x2f4 0x758 0x7f4 0x4 0x2
+#define MX35_PAD_FEC_TDATA0__GPIO3_11				0x2f4 0x758 0x8f0 0x5 0x1
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0			0x2f4 0x758 0x000 0x6 0x0
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5		0x2f4 0x758 0x000 0x7 0x0
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN				0x2f8 0x75c 0x000 0x0 0x0
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1			0x2f8 0x75c 0x998 0x1 0x3
+#define MX35_PAD_FEC_TX_EN__UART3_RI				0x2f8 0x75c 0x000 0x2 0x0
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3		0x2f8 0x75c 0x9d8 0x3 0x1
+#define MX35_PAD_FEC_TX_EN__GPIO3_12				0x2f8 0x75c 0x8f4 0x5 0x1
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS			0x2f8 0x75c 0x000 0x6 0x0
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6		0x2f8 0x75c 0x000 0x7 0x0
+#define MX35_PAD_FEC_MDC__FEC_MDC				0x2fc 0x760 0x000 0x0 0x0
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN				0x2fc 0x760 0x000 0x1 0x0
+#define MX35_PAD_FEC_MDC__UART3_DCD				0x2fc 0x760 0x000 0x2 0x0
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4			0x2fc 0x760 0x9dc 0x3 0x1
+#define MX35_PAD_FEC_MDC__GPIO3_13				0x2fc 0x760 0x8f8 0x5 0x1
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR				0x2fc 0x760 0x000 0x6 0x0
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7			0x2fc 0x760 0x000 0x7 0x0
+#define MX35_PAD_FEC_MDIO__FEC_MDIO				0x300 0x764 0x000 0x0 0x0
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN				0x300 0x764 0x7cc 0x1 0x2
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5			0x300 0x764 0x9e0 0x3 0x1
+#define MX35_PAD_FEC_MDIO__GPIO3_14				0x300 0x764 0x8fc 0x5 0x1
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD				0x300 0x764 0x000 0x6 0x0
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8			0x300 0x764 0x000 0x7 0x0
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR				0x304 0x768 0x000 0x0 0x0
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE				0x304 0x768 0x990 0x1 0x2
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK			0x304 0x768 0x994 0x2 0x4
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6		0x304 0x768 0x9e4 0x3 0x1
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15				0x304 0x768 0x900 0x5 0x1
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC			0x304 0x768 0x924 0x6 0x3
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9		0x304 0x768 0x000 0x7 0x0
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR				0x308 0x76c 0x000 0x0 0x0
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0			0x308 0x76c 0x930 0x1 0x3
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7		0x308 0x76c 0x9e8 0x3 0x1
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4				0x308 0x76c 0x960 0x4 0x1
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16				0x308 0x76c 0x000 0x5 0x0
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO			0x308 0x76c 0x92c 0x6 0x5
+#define MX35_PAD_FEC_CRS__FEC_CRS				0x30c 0x770 0x000 0x0 0x0
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1				0x30c 0x770 0x934 0x1 0x3
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR			0x30c 0x770 0x000 0x3 0x0
+#define MX35_PAD_FEC_CRS__KPP_COL_5				0x30c 0x770 0x964 0x4 0x1
+#define MX35_PAD_FEC_CRS__GPIO3_17				0x30c 0x770 0x000 0x5 0x0
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE			0x30c 0x770 0x000 0x6 0x0
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1			0x310 0x774 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2			0x310 0x774 0x938 0x1 0x4
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC			0x310 0x774 0x000 0x2 0x0
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC			0x310 0x774 0x9f4 0x3 0x2
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6				0x310 0x774 0x968 0x4 0x1
+#define MX35_PAD_FEC_RDATA1__GPIO3_18				0x310 0x774 0x000 0x5 0x0
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0			0x310 0x774 0x000 0x6 0x0
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1			0x314 0x778 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3			0x314 0x778 0x93c 0x1 0x4
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS			0x314 0x778 0x7bc 0x2 0x1
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7				0x314 0x778 0x96c 0x4 0x1
+#define MX35_PAD_FEC_TDATA1__GPIO3_19				0x314 0x778 0x000 0x5 0x0
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1			0x314 0x778 0x000 0x6 0x0
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2			0x318 0x77c 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4			0x318 0x77c 0x940 0x1 0x3
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD			0x318 0x77c 0x7b4 0x2 0x1
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4				0x318 0x77c 0x980 0x4 0x1
+#define MX35_PAD_FEC_RDATA2__GPIO3_20				0x318 0x77c 0x000 0x5 0x0
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2			0x31c 0x780 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5			0x31c 0x780 0x944 0x1 0x3
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD			0x31c 0x780 0x7b0 0x2 0x1
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5				0x31c 0x780 0x984 0x4 0x1
+#define MX35_PAD_FEC_TDATA2__GPIO3_21				0x31c 0x780 0x000 0x5 0x0
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3			0x320 0x784 0x000 0x0 0x0
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6			0x320 0x784 0x948 0x1 0x3
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC			0x320 0x784 0x7c0 0x2 0x1
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6				0x320 0x784 0x988 0x4 0x1
+#define MX35_PAD_FEC_RDATA3__GPIO3_22				0x320 0x784 0x000 0x6 0x0
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3			0x324 0x788 0x000 0x0 0x0
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7			0x324 0x788 0x94c 0x1 0x3
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS			0x324 0x788 0x7c4 0x2 0x1
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7				0x324 0x788 0x98c 0x4 0x1
+#define MX35_PAD_FEC_TDATA3__GPIO3_23				0x324 0x788 0x000 0x5 0x0
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK			0x000 0x78c 0x000 0x0 0x0
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE			0x000 0x790 0x000 0x0 0x0
+
+#endif /* __DTS_IMX35_PINFUNC_H */
diff --git a/src/arm/imx35.dtsi b/src/arm/imx35.dtsi
new file mode 100644
index 000000000000..6932928f3b45
--- /dev/null
+++ b/src/arm/imx35.dtsi
@@ -0,0 +1,385 @@
+/*
+ * Copyright 2012 Steffen Trumtrar, Pengutronix
+ *
+ * based on imx27.dtsi
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "imx35-pinfunc.h"
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1136";
+			device_type = "cpu";
+		};
+	};
+
+	avic: avic-interrupt-controller@68000000 {
+		compatible = "fsl,imx35-avic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x10000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&avic>;
+		ranges;
+
+		L2: l2-cache@30000000 {
+			compatible = "arm,l210-cache";
+			reg = <0x30000000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		aips1: aips@43f00000 {
+			compatible = "fsl,aips", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			i2c1: i2c@43f80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f80000 0x4000>;
+				clocks = <&clks 51>;
+				clock-names = "ipg_per";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f84000 0x4000>;
+				clocks = <&clks 53>;
+				clock-names = "ipg_per";
+				interrupts = <3>;
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				clocks = <&clks 9>, <&clks 70>;
+				clock-names = "ipg", "per";
+				interrupts = <45>;
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				clocks = <&clks 9>, <&clks 71>;
+				clock-names = "ipg", "per";
+				interrupts = <32>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
+				reg = <0x43f98000 0x4000>;
+				clocks = <&clks 52>;
+				clock-names = "ipg_per";
+				interrupts = <4>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@43fa0000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
+				reg = <0x43fa0000 0x4000>;
+				interrupts = <11>;
+				clocks = <&clks 68>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			spi1: cspi@43fa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-cspi";
+				reg = <0x43fa4000 0x4000>;
+				clocks = <&clks 35 &clks 35>;
+				clock-names = "ipg", "per";
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@43fac000 {
+				compatible = "fsl,imx35-iomuxc";
+				reg = <0x43fac000 0x4000>;
+			};
+		};
+
+		spba: spba-bus@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x100000>;
+			ranges;
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx35-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				clocks = <&clks 9>, <&clks 72>;
+				clock-names = "ipg", "per";
+				interrupts = <18>;
+				status = "disabled";
+			};
+
+			spi2: cspi@50010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx35-cspi";
+				reg = <0x50010000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks 36 &clks 36>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			fec: fec@50038000 {
+				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
+				reg = <0x50038000 0x4000>;
+				clocks = <&clks 46>, <&clks 8>;
+				clock-names = "ipg", "ahb";
+				interrupts = <57>;
+				status = "disabled";
+			};
+		};
+
+		aips2: aips@53f00000 {
+			compatible = "fsl,aips", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			clks: ccm@53f80000 {
+				compatible = "fsl,imx35-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>;
+				#clock-cells = <1>;
+			};
+
+			gpt: timer@53f90000 {
+				compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks 9>, <&clks 50>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <56>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			esdhc1: esdhc@53fb4000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fb4000 0x4000>;
+				interrupts = <7>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc2: esdhc@53fb8000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fb8000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 44>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc3: esdhc@53fbc000 {
+				compatible = "fsl,imx35-esdhc";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 9>, <&clks 8>, <&clks 45>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			audmux: audmux@53fc4000 {
+				compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
+				reg = <0x53fc4000 0x4000>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: sdma@53fd4000 {
+				compatible = "fsl,imx35-sdma";
+				reg = <0x53fd4000 0x4000>;
+				clocks = <&clks 9>, <&clks 65>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				interrupts = <34>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
+			};
+
+			wdog: wdog@53fdc000 {
+				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 74>;
+				clock-names = "";
+				interrupts = <55>;
+			};
+
+			can1: can@53fe4000 {
+				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fe4000 0x1000>;
+				clocks = <&clks 33>;
+				clock-names = "ipg";
+				interrupts = <43>;
+				status = "disabled";
+			};
+
+			can2: can@53fe8000 {
+				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+				reg = <0x53fe8000 0x1000>;
+				clocks = <&clks 34>;
+				clock-names = "ipg";
+				interrupts = <44>;
+				status = "disabled";
+			};
+
+			usbotg: usb@53ff4000 {
+				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+				reg = <0x53ff4000 0x0200>;
+				interrupts = <37>;
+				clocks = <&clks 73>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbhost1: usb@53ff4400 {
+				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
+				reg = <0x53ff4400 0x0200>;
+				interrupts = <35>;
+				clocks = <&clks 73>;
+				fsl,usbmisc = <&usbmisc 1>;
+				fsl,usbphy = <&usbphy1>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53ff4600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx35-usbmisc";
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
+				reg = <0x53ff4600 0x00f>;
+			};
+		};
+
+		emi@80000000 { /* External Memory Interface */
+			compatible = "fsl,emi", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x40000000>;
+			ranges;
+
+			nfc: nand@bb000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx35-nand", "fsl,imx25-nand";
+				reg = <0xbb000000 0x2000>;
+				clocks = <&clks 29>;
+				clock-names = "";
+				interrupts = <33>;
+				status = "disabled";
+			};
+
+			weim: weim@b8002000 {
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clocks = <&clks 0>;
+				compatible = "fsl,imx35-weim", "fsl,imx27-weim";
+				reg = <0xb8002000 0x1000>;
+				ranges = <
+					0 0 0xa0000000 0x8000000
+					1 0 0xa8000000 0x8000000
+					2 0 0xb0000000 0x2000000
+					3 0 0xb2000000 0x2000000
+					4 0 0xb4000000 0x2000000
+					5 0 0xb6000000 0x2000000
+				>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usb-phy@0 {
+			reg = <0>;
+			compatible = "usb-nop-xceiv";
+		};
+
+		usbphy1: usb-phy@1 {
+			reg = <1>;
+			compatible = "usb-nop-xceiv";
+		};
+	};
+};
diff --git a/src/arm/imx50-evk.dts b/src/arm/imx50-evk.dts
new file mode 100644
index 000000000000..1b22512c91bd
--- /dev/null
+++ b/src/arm/imx50-evk.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx50.dtsi"
+
+/ {
+	model = "Freescale i.MX50 Evaluation Kit";
+	compatible = "fsl,imx50-evk", "fsl,imx50";
+
+	memory {
+		reg = <0x70000000 0x80000000>;
+	};
+};
+
+&cspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cspi>;
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
+	status = "okay";
+
+	flash: m25p32@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p32", "m25p80";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "kernel";
+			reg = <0x100000 0x300000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 12 0>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx50-evk {
+		pinctrl_cspi: cspigrp {
+			fsl,pins = <
+				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
+				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
+				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
+				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
+				MX50_PAD_ECSPI1_MOSI__CSPI_SS1		0xf4
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
+				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
+				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
+				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
+				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
+				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
+				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
+				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
+				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
+				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
+				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
+				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
+				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbh2 {
+	status = "okay";
+};
+
+&usbh3 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
diff --git a/src/arm/imx50-pinfunc.h b/src/arm/imx50-pinfunc.h
new file mode 100644
index 000000000000..97e6e7f4ebdd
--- /dev/null
+++ b/src/arm/imx50-pinfunc.h
@@ -0,0 +1,923 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX50_PINFUNC_H
+#define __DTS_IMX50_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX50_PAD_KEY_COL0__KPP_COL_0				0x020 0x2cc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL0__GPIO4_0				0x020 0x2cc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL0__EIM_NANDF_CLE			0x020 0x2cc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL0__CTI_TRIGIN7				0x020 0x2cc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL0__USBPHY1_TXREADY			0x020 0x2cc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW0__KPP_ROW_0				0x024 0x2d0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW0__GPIO4_1				0x024 0x2d0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE			0x024 0x2d0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7			0x024 0x2d0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID			0x024 0x2d0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL1__KPP_COL_1				0x028 0x2d4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL1__GPIO4_2				0x028 0x2d4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL1__EIM_NANDF_CEN_0			0x028 0x2d4 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL1__CTI_TRIGOUT_ACK6			0x028 0x2d4 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL1__USBPHY1_RXACTIVE			0x028 0x2d4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW1__KPP_ROW_1				0x02c 0x2d8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW1__GPIO4_3				0x02c 0x2d8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1			0x02c 0x2d8 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7			0x02c 0x2d8 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR			0x02c 0x2d8 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL2__KPP_COL_1				0x030 0x2dc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL2__GPIO4_4				0x030 0x2dc 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2			0x030 0x2dc 0x000 0x2 0x0
+#define MX50_PAD_KEY_COL2__CTI_TRIGOUT6				0x030 0x2dc 0x000 0x6 0x0
+#define MX50_PAD_KEY_COL2__USBPHY1_SIECLOCK			0x030 0x2dc 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW2__KPP_ROW_2				0x034 0x2e0 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW2__GPIO4_5				0x034 0x2e0 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3			0x034 0x2e0 0x000 0x2 0x0
+#define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7				0x034 0x2e0 0x000 0x6 0x0
+#define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0			0x034 0x2e0 0x000 0x7 0x0
+#define MX50_PAD_KEY_COL3__KPP_COL_2				0x038 0x2e4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL3__GPIO4_6				0x038 0x2e4 0x000 0x1 0x0
+#define MX50_PAD_KEY_COL3__EIM_NANDF_READY0			0x038 0x2e4 0x7b4 0x2 0x0
+#define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0			0x038 0x2e4 0x7b8 0x6 0x0
+#define MX50_PAD_KEY_COL3__USBPHY1_LINESTATE_1			0x038 0x2e4 0x000 0x7 0x0
+#define MX50_PAD_KEY_ROW3__KPP_ROW_3				0x03c 0x2e8 0x000 0x0 0x0
+#define MX50_PAD_KEY_ROW3__GPIO4_7				0x03c 0x2e8 0x000 0x1 0x0
+#define MX50_PAD_KEY_ROW3__EIM_NANDF_DQS			0x03c 0x2e8 0x7b0 0x2 0x0
+#define MX50_PAD_KEY_ROW3__SDMA_EXT_EVENT_1			0x03c 0x2e8 0x7bc 0x6 0x0
+#define MX50_PAD_KEY_ROW3__USBPHY1_VBUSVALID			0x03c 0x2e8 0x000 0x7 0x0
+#define MX50_PAD_I2C1_SCL__I2C1_SCL				0x040 0x2ec 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SCL__GPIO6_18				0x040 0x2ec 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SCL__UART2_TXD_MUX			0x040 0x2ec 0x7cc 0x2 0x0
+#define MX50_PAD_I2C1_SDA__I2C1_SDA				0x044 0x2f0 0x000 0x0 0x0
+#define MX50_PAD_I2C1_SDA__GPIO6_19				0x044 0x2f0 0x000 0x1 0x0
+#define MX50_PAD_I2C1_SDA__UART2_RXD_MUX			0x044 0x2f0 0x7cc 0x2 0x1
+#define MX50_PAD_I2C2_SCL__I2C2_SCL				0x048 0x2f4 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SCL__GPIO6_20				0x048 0x2f4 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SCL__UART2_CTS				0x048 0x2f4 0x000 0x2 0x0
+#define MX50_PAD_I2C2_SDA__I2C2_SDA				0x04c 0x2f8 0x000 0x0 0x0
+#define MX50_PAD_I2C2_SDA__GPIO6_21				0x04c 0x2f8 0x000 0x1 0x0
+#define MX50_PAD_I2C2_SDA__UART2_RTS				0x04c 0x2f8 0x7c8 0x2 0x1
+#define MX50_PAD_I2C3_SCL__I2C3_SCL				0x050 0x2fc 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SCL__GPIO6_22				0x050 0x2fc 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SCL__FEC_MDC				0x050 0x2fc 0x000 0x2 0x0
+#define MX50_PAD_I2C3_SCL__GPC_PMIC_RDY				0x050 0x2fc 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SCL__GPT_CAPIN1				0x050 0x2fc 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SCL__OBSERVE_MUX_OBSRV_INT_OUT0		0x050 0x2fc 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SCL__USBOH1_USBOTG_OC			0x050 0x2fc 0x7e8 0x7 0x0
+#define MX50_PAD_I2C3_SDA__I2C3_SDA				0x054 0x300 0x000 0x0 0x0
+#define MX50_PAD_I2C3_SDA__GPIO6_23				0x054 0x300 0x000 0x1 0x0
+#define MX50_PAD_I2C3_SDA__FEC_MDIO				0x054 0x300 0x774 0x2 0x0
+#define MX50_PAD_I2C3_SDA__TZIC_PWRFAIL_INT			0x054 0x300 0x000 0x3 0x0
+#define MX50_PAD_I2C3_SDA__SRTC_ALARM_DEB			0x054 0x300 0x000 0x4 0x0
+#define MX50_PAD_I2C3_SDA__GPT_CAPIN2				0x054 0x300 0x000 0x5 0x0
+#define MX50_PAD_I2C3_SDA__OBSERVE_MUX_OBSRV_INT_OUT1		0x054 0x300 0x000 0x6 0x0
+#define MX50_PAD_I2C3_SDA__USBOH1_USBOTG_PWR			0x054 0x300 0x000 0x7 0x0
+#define MX50_PAD_PWM1__PWM1_PWMO				0x058 0x304 0x000 0x0 0x0
+#define MX50_PAD_PWM1__GPIO6_24					0x058 0x304 0x000 0x1 0x0
+#define MX50_PAD_PWM1__USBOH1_USBOTG_OC				0x058 0x304 0x7e8 0x2 0x1
+#define MX50_PAD_PWM1__GPT_CMPOUT1				0x058 0x304 0x000 0x5 0x0
+#define MX50_PAD_PWM1__OBSERVE_MUX_OBSRV_INT_OUT2		0x058 0x304 0x000 0x6 0x0
+#define MX50_PAD_PWM1__SJC_FAIL					0x058 0x304 0x000 0x7 0x0
+#define MX50_PAD_PWM2__PWM2_PWMO				0x05c 0x308 0x000 0x0 0x0
+#define MX50_PAD_PWM2__GPIO6_25					0x05c 0x308 0x000 0x1 0x0
+#define MX50_PAD_PWM2__USBOH1_USBOTG_PWR			0x05c 0x308 0x000 0x2 0x0
+#define MX50_PAD_PWM2__GPT_CMPOUT2				0x05c 0x308 0x000 0x5 0x0
+#define MX50_PAD_PWM2__OBSERVE_MUX_OBSRV_INT_OUT3		0x05c 0x308 0x000 0x6 0x0
+#define MX50_PAD_PWM2__SRC_ANY_PU_RST				0x05c 0x308 0x000 0x7 0x0
+#define MX50_PAD_OWIRE__OWIRE_LINE				0x060 0x30c 0x000 0x0 0x0
+#define MX50_PAD_OWIRE__GPIO6_26				0x060 0x30c 0x000 0x1 0x0
+#define MX50_PAD_OWIRE__USBOH1_USBH1_OC				0x060 0x30c 0x000 0x2 0x0
+#define MX50_PAD_OWIRE__CCM_SSI_EXT1_CLK			0x060 0x30c 0x000 0x3 0x0
+#define MX50_PAD_OWIRE__EPDC_PWRIRQ				0x060 0x30c 0x000 0x4 0x0
+#define MX50_PAD_OWIRE__GPT_CMPOUT3				0x060 0x30c 0x000 0x5 0x0
+#define MX50_PAD_OWIRE__OBSERVE_MUX_OBSRV_INT_OUT4		0x060 0x30c 0x000 0x6 0x0
+#define MX50_PAD_OWIRE__SJC_JTAG_ACT				0x060 0x30c 0x000 0x7 0x0
+#define MX50_PAD_EPITO__EPIT1_EPITO				0x064 0x310 0x000 0x0 0x0
+#define MX50_PAD_EPITO__GPIO6_27				0x064 0x310 0x000 0x1 0x0
+#define MX50_PAD_EPITO__USBOH1_USBH1_PWR			0x064 0x310 0x000 0x2 0x0
+#define MX50_PAD_EPITO__CCM_SSI_EXT2_CLK			0x064 0x310 0x000 0x3 0x0
+#define MX50_PAD_EPITO__DPLLIP1_TOG_EN				0x064 0x310 0x000 0x4 0x0
+#define MX50_PAD_EPITO__GPT_CLK_IN				0x064 0x310 0x000 0x5 0x0
+#define MX50_PAD_EPITO__PMU_IRQ_B				0x064 0x310 0x000 0x6 0x0
+#define MX50_PAD_EPITO__SJC_DE_B				0x064 0x310 0x000 0x7 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_B				0x068 0x314 0x000 0x0 0x0
+#define MX50_PAD_WDOG__GPIO6_28					0x068 0x314 0x000 0x1 0x0
+#define MX50_PAD_WDOG__WDOG1_WDOG_RST_B_DEB			0x068 0x314 0x000 0x2 0x0
+#define MX50_PAD_WDOG__CCM_XTAL32K				0x068 0x314 0x000 0x6 0x0
+#define MX50_PAD_WDOG__SJC_DONE					0x068 0x314 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXFS__AUDMUX_AUD3_TXFS			0x06c 0x318 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXFS__GPIO6_0				0x06c 0x318 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXFS__SRC_BT_FUSE_RSV_1			0x06c 0x318 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXFS__USBPHY1_DATAOUT_8			0x06c 0x318 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXC__AUDMUX_AUD3_TXC			0x070 0x31c 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXC__GPIO6_1				0x070 0x31c 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXC__SRC_BT_FUSE_RSV_0			0x070 0x31c 0x000 0x6 0x0
+#define MX50_PAD_SSI_TXC__USBPHY1_DATAOUT_9			0x070 0x31c 0x000 0x7 0x0
+#define MX50_PAD_SSI_TXD__AUDMUX_AUD3_TXD			0x074 0x320 0x000 0x0 0x0
+#define MX50_PAD_SSI_TXD__GPIO6_2				0x074 0x320 0x000 0x1 0x0
+#define MX50_PAD_SSI_TXD__CSPI_RDY				0x074 0x320 0x6e8 0x4 0x0
+#define MX50_PAD_SSI_TXD__USBPHY1_DATAOUT_10			0x074 0x320 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXD__AUDMUX_AUD3_RXD			0x078 0x324 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXD__GPIO6_3				0x078 0x324 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXD__CSPI_SS3				0x078 0x324 0x6f4 0x4 0x0
+#define MX50_PAD_SSI_RXD__USBPHY1_DATAOUT_11			0x078 0x324 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXFS__AUDMUX_AUD3_RXFS			0x07c 0x328 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXFS__GPIO6_4				0x07c 0x328 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXFS__UART5_TXD_MUX			0x07c 0x328 0x7e4 0x2 0x0
+#define MX50_PAD_SSI_RXFS__EIM_WEIM_D_6				0x07c 0x328 0x804 0x3 0x0
+#define MX50_PAD_SSI_RXFS__CSPI_SS2				0x07c 0x328 0x6f0 0x4 0x0
+#define MX50_PAD_SSI_RXFS__FEC_COL				0x07c 0x328 0x770 0x5 0x0
+#define MX50_PAD_SSI_RXFS__FEC_MDC				0x07c 0x328 0x000 0x6 0x0
+#define MX50_PAD_SSI_RXFS__USBPHY1_DATAOUT_12			0x07c 0x328 0x000 0x7 0x0
+#define MX50_PAD_SSI_RXC__AUDMUX_AUD3_RXC			0x080 0x32c 0x000 0x0 0x0
+#define MX50_PAD_SSI_RXC__GPIO6_5				0x080 0x32c 0x000 0x1 0x0
+#define MX50_PAD_SSI_RXC__UART5_RXD_MUX				0x080 0x32c 0x7e4 0x2 0x1
+#define MX50_PAD_SSI_RXC__EIM_WEIM_D_7				0x080 0x32c 0x808 0x3 0x0
+#define MX50_PAD_SSI_RXC__CSPI_SS1				0x080 0x32c 0x6ec 0x4 0x0
+#define MX50_PAD_SSI_RXC__FEC_RX_CLK				0x080 0x32c 0x780 0x5 0x0
+#define MX50_PAD_SSI_RXC__FEC_MDIO				0x080 0x32c 0x774 0x6 0x1
+#define MX50_PAD_SSI_RXC__USBPHY1_DATAOUT_13			0x080 0x32c 0x000 0x7 0x0
+#define MX50_PAD_UART1_TXD__UART1_TXD_MUX			0x084 0x330 0x7c4 0x0 0x0
+#define MX50_PAD_UART1_TXD__GPIO6_6				0x084 0x330 0x000 0x1 0x0
+#define MX50_PAD_UART1_TXD__USBPHY1_DATAOUT_14			0x084 0x330 0x000 0x7 0x0
+#define MX50_PAD_UART1_RXD__UART1_RXD_MUX			0x088 0x334 0x7c4 0x0 0x1
+#define MX50_PAD_UART1_RXD__GPIO6_7				0x088 0x334 0x000 0x1 0x0
+#define MX50_PAD_UART1_RXD__USBPHY1_DATAOUT_15			0x088 0x334 0x000 0x7 0x0
+#define MX50_PAD_UART1_CTS__UART1_CTS				0x08c 0x338 0x000 0x0 0x0
+#define MX50_PAD_UART1_CTS__GPIO6_8				0x08c 0x338 0x000 0x1 0x0
+#define MX50_PAD_UART1_CTS__UART5_TXD_MUX			0x08c 0x338 0x7e4 0x2 0x2
+#define MX50_PAD_UART1_CTS__ESDHC4_DAT4				0x08c 0x338 0x760 0x4 0x0
+#define MX50_PAD_UART1_CTS__ESDHC4_CMD				0x08c 0x338 0x74c 0x5 0x0
+#define MX50_PAD_UART1_CTS__USBPHY2_DATAOUT_8			0x08c 0x338 0x000 0x7 0x0
+#define MX50_PAD_UART1_RTS__UART1_RTS				0x090 0x33c 0x7c0 0x0 0x3
+#define MX50_PAD_UART1_RTS__GPIO6_9				0x090 0x33c 0x000 0x1 0x0
+#define MX50_PAD_UART1_RTS__UART5_RXD_MUX			0x090 0x33c 0x7e4 0x2 0x3
+#define MX50_PAD_UART1_RTS__ESDHC4_DAT5				0x090 0x33c 0x764 0x4 0x0
+#define MX50_PAD_UART1_RTS__ESDHC4_CLK				0x090 0x33c 0x748 0x5 0x0
+#define MX50_PAD_UART1_RTS__USBPHY2_DATAOUT_9			0x090 0x33c 0x000 0x7 0x0
+#define MX50_PAD_UART2_TXD__UART2_TXD_MUX			0x094 0x340 0x7cc 0x0 0x2
+#define MX50_PAD_UART2_TXD__GPIO6_10				0x094 0x340 0x000 0x1 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT6				0x094 0x340 0x768 0x4 0x0
+#define MX50_PAD_UART2_TXD__ESDHC4_DAT4				0x094 0x340 0x760 0x5 0x1
+#define MX50_PAD_UART2_TXD__USBPHY2_DATAOUT_10			0x094 0x340 0x000 0x7 0x0
+#define MX50_PAD_UART2_RXD__UART2_RXD_MUX			0x098 0x344 0x7cc 0x0 0x3
+#define MX50_PAD_UART2_RXD__GPIO6_11				0x098 0x344 0x000 0x1 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT7				0x098 0x344 0x76c 0x4 0x0
+#define MX50_PAD_UART2_RXD__ESDHC4_DAT5				0x098 0x344 0x764 0x5 0x1
+#define MX50_PAD_UART2_RXD__USBPHY2_DATAOUT_11			0x098 0x344 0x000 0x7 0x0
+#define MX50_PAD_UART2_CTS__UART2_CTS				0x09c 0x348 0x000 0x0 0x0
+#define MX50_PAD_UART2_CTS__GPIO6_12				0x09c 0x348 0x000 0x1 0x0
+#define MX50_PAD_UART2_CTS__ESDHC4_CMD				0x09c 0x348 0x74c 0x4 0x1
+#define MX50_PAD_UART2_CTS__ESDHC4_DAT6				0x09c 0x348 0x768 0x5 0x1
+#define MX50_PAD_UART2_CTS__USBPHY2_DATAOUT_12			0x09c 0x348 0x000 0x7 0x0
+#define MX50_PAD_UART2_RTS__UART2_RTS				0x0a0 0x34c 0x7c8 0x0 0x2
+#define MX50_PAD_UART2_RTS__GPIO6_13				0x0a0 0x34c 0x000 0x1 0x0
+#define MX50_PAD_UART2_RTS__ESDHC4_CLK				0x0a0 0x34c 0x748 0x4 0x1
+#define MX50_PAD_UART2_RTS__ESDHC4_DAT7				0x0a0 0x34c 0x76c 0x5 0x1
+#define MX50_PAD_UART2_RTS__USBPHY2_DATAOUT_13			0x0a0 0x34c 0x000 0x7 0x0
+#define MX50_PAD_UART3_TXD__UART3_TXD_MUX			0x0a4 0x350 0x7d4 0x0 0x0
+#define MX50_PAD_UART3_TXD__GPIO6_14				0x0a4 0x350 0x000 0x1 0x0
+#define MX50_PAD_UART3_TXD__ESDHC1_DAT4				0x0a4 0x350 0x000 0x3 0x0
+#define MX50_PAD_UART3_TXD__ESDHC4_DAT0				0x0a4 0x350 0x000 0x4 0x0
+#define MX50_PAD_UART3_TXD__ESDHC2_WP				0x0a4 0x350 0x744 0x5 0x0
+#define MX50_PAD_UART3_TXD__EIM_WEIM_D_12			0x0a4 0x350 0x81c 0x6 0x0
+#define MX50_PAD_UART3_TXD__USBPHY2_DATAOUT_14			0x0a4 0x350 0x000 0x7 0x0
+#define MX50_PAD_UART3_RXD__UART3_RXD_MUX			0x0a8 0x354 0x7d4 0x0 0x1
+#define MX50_PAD_UART3_RXD__GPIO6_15				0x0a8 0x354 0x000 0x1 0x0
+#define MX50_PAD_UART3_RXD__ESDHC1_DAT5				0x0a8 0x354 0x000 0x3 0x0
+#define MX50_PAD_UART3_RXD__ESDHC4_DAT1				0x0a8 0x354 0x754 0x4 0x0
+#define MX50_PAD_UART3_RXD__ESDHC2_CD				0x0a8 0x354 0x740 0x5 0x0
+#define MX50_PAD_UART3_RXD__EIM_WEIM_D_13			0x0a8 0x354 0x820 0x6 0x0
+#define MX50_PAD_UART3_RXD__USBPHY2_DATAOUT_15			0x0a8 0x354 0x000 0x7 0x0
+#define MX50_PAD_UART4_TXD__UART4_TXD_MUX			0x0ac 0x358 0x7dc 0x0 0x0
+#define MX50_PAD_UART4_TXD__GPIO6_16				0x0ac 0x358 0x000 0x1 0x0
+#define MX50_PAD_UART4_TXD__UART3_CTS				0x0ac 0x358 0x7d0 0x2 0x0
+#define MX50_PAD_UART4_TXD__ESDHC1_DAT6				0x0ac 0x358 0x000 0x3 0x0
+#define MX50_PAD_UART4_TXD__ESDHC4_DAT2				0x0ac 0x358 0x758 0x4 0x0
+#define MX50_PAD_UART4_TXD__ESDHC2_LCTL				0x0ac 0x358 0x000 0x5 0x0
+#define MX50_PAD_UART4_TXD__EIM_WEIM_D_14			0x0ac 0x358 0x824 0x6 0x0
+#define MX50_PAD_UART4_RXD__UART4_RXD_MUX			0x0b0 0x35c 0x7dc 0x0 0x1
+#define MX50_PAD_UART4_RXD__GPIO6_17				0x0b0 0x35c 0x000 0x1 0x0
+#define MX50_PAD_UART4_RXD__UART3_RTS				0x0b0 0x35c 0x7d0 0x2 0x1
+#define MX50_PAD_UART4_RXD__ESDHC1_DAT7				0x0b0 0x35c 0x000 0x3 0x0
+#define MX50_PAD_UART4_RXD__ESDHC4_DAT3				0x0b0 0x35c 0x75c 0x4 0x0
+#define MX50_PAD_UART4_RXD__ESDHC1_LCTL				0x0b0 0x35c 0x000 0x5 0x0
+#define MX50_PAD_UART4_RXD__EIM_WEIM_D_15			0x0b0 0x35c 0x828 0x6 0x0
+#define MX50_PAD_CSPI_SCLK__CSPI_SCLK				0x0b4 0x360 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SCLK__GPIO4_8				0x0b4 0x360 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MOSI__CSPI_MOSI				0x0b8 0x364 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MOSI__GPIO4_9				0x0b8 0x364 0x000 0x1 0x0
+#define MX50_PAD_CSPI_MISO__CSPI_MISO				0x0bc 0x368 0x000 0x0 0x0
+#define MX50_PAD_CSPI_MISO__GPIO4_10				0x0bc 0x368 0x000 0x1 0x0
+#define MX50_PAD_CSPI_SS0__CSPI_SS0				0x0c0 0x36c 0x000 0x0 0x0
+#define MX50_PAD_CSPI_SS0__GPIO4_11				0x0c0 0x36c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK			0x0c4 0x370 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SCLK__GPIO4_12				0x0c4 0x370 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY				0x0c4 0x370 0x6e8 0x2 0x1
+#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY			0x0c4 0x370 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SCLK__UART3_RTS				0x0c4 0x370 0x7d0 0x4 0x2
+#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE_6			0x0c4 0x370 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SCLK__EIM_WEIM_D_8			0x0c4 0x370 0x80c 0x7 0x0
+#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI			0x0c8 0x374 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MOSI__GPIO4_13				0x0c8 0x374 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1				0x0c8 0x374 0x6ec 0x2 0x1
+#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1			0x0c8 0x374 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MOSI__UART3_CTS				0x0c8 0x374 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE_7			0x0c8 0x374 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MOSI__EIM_WEIM_D_9			0x0c8 0x374 0x810 0x7 0x0
+#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO			0x0cc 0x378 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_MISO__GPIO4_14				0x0cc 0x378 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_MISO__CSPI_SS2				0x0cc 0x378 0x6f0 0x2 0x1
+#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2			0x0cc 0x378 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_MISO__UART4_RTS				0x0cc 0x378 0x7d8 0x4 0x0
+#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE_8			0x0cc 0x378 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_MISO__EIM_WEIM_D_10			0x0cc 0x378 0x814 0x7 0x0
+#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0				0x0d0 0x37c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI1_SS0__GPIO4_15				0x0d0 0x37c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI1_SS0__CSPI_SS3				0x0d0 0x37c 0x6f4 0x2 0x1
+#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3				0x0d0 0x37c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI1_SS0__UART4_CTS				0x0d0 0x37c 0x000 0x4 0x0
+#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE_9			0x0d0 0x37c 0x000 0x5 0x0
+#define MX50_PAD_ECSPI1_SS0__EIM_WEIM_D_11			0x0d0 0x37c 0x818 0x7 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK			0x0d4 0x380 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SCLK__GPIO4_16				0x0d4 0x380 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR_RWN			0x0d4 0x380 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY			0x0d4 0x380 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SCLK__UART5_RTS				0x0d4 0x380 0x7e0 0x4 0x0
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK			0x0d4 0x380 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_NANDF_CEN_4			0x0d4 0x380 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SCLK__EIM_WEIM_D_8			0x0d4 0x380 0x80c 0x7 0x1
+#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI			0x0d8 0x384 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MOSI__GPIO4_17				0x0d8 0x384 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RE_E			0x0d8 0x384 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1			0x0d8 0x384 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MOSI__UART5_CTS				0x0d8 0x384 0x7e0 0x4 0x1
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_ENABLE			0x0d8 0x384 0x000 0x5 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_NANDF_CEN_5			0x0d8 0x384 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MOSI__EIM_WEIM_D_9			0x0d8 0x384 0x810 0x7 0x1
+#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO			0x0dc 0x388 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_MISO__GPIO4_18				0x0dc 0x388 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS				0x0dc 0x388 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2			0x0dc 0x388 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_MISO__UART5_TXD_MUX			0x0dc 0x388 0x7e4 0x4 0x4
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC			0x0dc 0x388 0x73c 0x5 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_NANDF_CEN_6			0x0dc 0x388 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_MISO__EIM_WEIM_D_10			0x0dc 0x388 0x814 0x7 0x1
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0				0x0e0 0x38c 0x000 0x0 0x0
+#define MX50_PAD_ECSPI2_SS0__GPIO4_19				0x0e0 0x38c 0x000 0x1 0x0
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS				0x0e0 0x38c 0x000 0x2 0x0
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS3				0x0e0 0x38c 0x000 0x3 0x0
+#define MX50_PAD_ECSPI2_SS0__UART5_RXD_MUX			0x0e0 0x38c 0x7e4 0x4 0x5
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC			0x0e0 0x38c 0x6f8 0x5 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_NANDF_CEN_7			0x0e0 0x38c 0x000 0x6 0x0
+#define MX50_PAD_ECSPI2_SS0__EIM_WEIM_D_11			0x0e0 0x38c 0x818 0x7 0x1
+#define MX50_PAD_SD1_CLK__ESDHC1_CLK				0x0e4 0x390 0x000 0x0 0x0
+#define MX50_PAD_SD1_CLK__GPIO5_0				0x0e4 0x390 0x000 0x1 0x0
+#define MX50_PAD_SD1_CLK__CCM_CLKO				0x0e4 0x390 0x000 0x7 0x0
+#define MX50_PAD_SD1_CMD__ESDHC1_CMD				0x0e8 0x394 0x000 0x0 0x0
+#define MX50_PAD_SD1_CMD__GPIO5_1				0x0e8 0x394 0x000 0x1 0x0
+#define MX50_PAD_SD1_CMD__CCM_CLKO2				0x0e8 0x394 0x000 0x7 0x0
+#define MX50_PAD_SD1_D0__ESDHC1_DAT0				0x0ec 0x398 0x000 0x0 0x0
+#define MX50_PAD_SD1_D0__GPIO5_2				0x0ec 0x398 0x000 0x1 0x0
+#define MX50_PAD_SD1_D0__CCM_PLL1_BYP				0x0ec 0x398 0x6dc 0x7 0x0
+#define MX50_PAD_SD1_D1__ESDHC1_DAT1				0x0f0 0x39c 0x000 0x0 0x0
+#define MX50_PAD_SD1_D1__GPIO5_3				0x0f0 0x39c 0x000 0x1 0x0
+#define MX50_PAD_SD1_D1__CCM_PLL2_BYP				0x0f0 0x39c 0x000 0x7 0x0
+#define MX50_PAD_SD1_D2__ESDHC1_DAT2				0x0f4 0x3a0 0x000 0x0 0x0
+#define MX50_PAD_SD1_D2__GPIO5_4				0x0f4 0x3a0 0x000 0x1 0x0
+#define MX50_PAD_SD1_D2__CCM_PLL3_BYP				0x0f4 0x3a0 0x6e4 0x7 0x0
+#define MX50_PAD_SD1_D3__ESDHC1_DAT3				0x0f8 0x3a4 0x000 0x0 0x0
+#define MX50_PAD_SD1_D3__GPIO5_5				0x0f8 0x3a4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__ESDHC2_CLK				0x0fc 0x3a8 0x000 0x0 0x0
+#define MX50_PAD_SD2_CLK__GPIO5_6				0x0fc 0x3a8 0x000 0x1 0x0
+#define MX50_PAD_SD2_CLK__MSHC_SCLK				0x0fc 0x3a8 0x000 0x2 0x0
+#define MX50_PAD_SD2_CMD__ESDHC2_CMD				0x100 0x3ac 0x000 0x0 0x0
+#define MX50_PAD_SD2_CMD__GPIO5_7				0x100 0x3ac 0x000 0x1 0x0
+#define MX50_PAD_SD2_CMD__MSHC_BS				0x100 0x3ac 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__ESDHC2_DAT0				0x104 0x3b0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D0__GPIO5_8				0x104 0x3b0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D0__MSHC_DATA_0				0x104 0x3b0 0x000 0x2 0x0
+#define MX50_PAD_SD2_D0__KPP_COL_4				0x104 0x3b0 0x790 0x3 0x0
+#define MX50_PAD_SD2_D1__ESDHC2_DAT1				0x108 0x3b4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D1__GPIO5_9				0x108 0x3b4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D1__MSHC_DATA_1				0x108 0x3b4 0x000 0x2 0x0
+#define MX50_PAD_SD2_D1__KPP_ROW_4				0x108 0x3b4 0x7a0 0x3 0x0
+#define MX50_PAD_SD2_D2__ESDHC2_DAT2				0x10c 0x3b8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D2__GPIO5_10				0x10c 0x3b8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D2__MSHC_DATA_2				0x10c 0x3b8 0x000 0x2 0x0
+#define MX50_PAD_SD2_D2__KPP_COL_5				0x10c 0x3b8 0x794 0x3 0x0
+#define MX50_PAD_SD2_D3__ESDHC2_DAT3				0x110 0x3bc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D3__GPIO5_11				0x110 0x3bc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D3__MSHC_DATA_3				0x110 0x3bc 0x000 0x2 0x0
+#define MX50_PAD_SD2_D3__KPP_ROW_5				0x110 0x3bc 0x7a4 0x3 0x0
+#define MX50_PAD_SD2_D4__ESDHC2_DAT4				0x114 0x3c0 0x000 0x0 0x0
+#define MX50_PAD_SD2_D4__GPIO5_12				0x114 0x3c0 0x000 0x1 0x0
+#define MX50_PAD_SD2_D4__AUDMUX_AUD4_RXFS			0x114 0x3c0 0x6d0 0x2 0x0
+#define MX50_PAD_SD2_D4__KPP_COL_6				0x114 0x3c0 0x798 0x3 0x0
+#define MX50_PAD_SD2_D4__EIM_WEIM_D_0				0x114 0x3c0 0x7ec 0x4 0x0
+#define MX50_PAD_SD2_D4__CCM_CCM_OUT_0				0x114 0x3c0 0x000 0x7 0x0
+#define MX50_PAD_SD2_D5__ESDHC2_DAT5				0x118 0x3c4 0x000 0x0 0x0
+#define MX50_PAD_SD2_D5__GPIO5_13				0x118 0x3c4 0x000 0x1 0x0
+#define MX50_PAD_SD2_D5__AUDMUX_AUD4_RXC			0x118 0x3c4 0x6cc 0x2 0x0
+#define MX50_PAD_SD2_D5__KPP_ROW_6				0x118 0x3c4 0x7a8 0x3 0x0
+#define MX50_PAD_SD2_D5__EIM_WEIM_D_1				0x118 0x3c4 0x7f0 0x4 0x0
+#define MX50_PAD_SD2_D5__CCM_CCM_OUT_1				0x118 0x3c4 0x000 0x7 0x0
+#define MX50_PAD_SD2_D6__ESDHC2_DAT6				0x11c 0x3c8 0x000 0x0 0x0
+#define MX50_PAD_SD2_D6__GPIO5_14				0x11c 0x3c8 0x000 0x1 0x0
+#define MX50_PAD_SD2_D6__AUDMUX_AUD4_RXD			0x11c 0x3c8 0x6c4 0x2 0x0
+#define MX50_PAD_SD2_D6__KPP_COL_7				0x11c 0x3c8 0x79c 0x3 0x0
+#define MX50_PAD_SD2_D6__EIM_WEIM_D_2				0x11c 0x3c8 0x7f4 0x4 0x0
+#define MX50_PAD_SD2_D6__CCM_CCM_OUT_2				0x11c 0x3c8 0x000 0x7 0x0
+#define MX50_PAD_SD2_D7__ESDHC2_DAT7				0x120 0x3cc 0x000 0x0 0x0
+#define MX50_PAD_SD2_D7__GPIO5_15				0x120 0x3cc 0x000 0x1 0x0
+#define MX50_PAD_SD2_D7__AUDMUX_AUD4_TXFS			0x120 0x3cc 0x6d8 0x2 0x0
+#define MX50_PAD_SD2_D7__KPP_ROW_7				0x120 0x3cc 0x7ac 0x3 0x0
+#define MX50_PAD_SD2_D7__EIM_WEIM_D_3				0x120 0x3cc 0x7f8 0x4 0x0
+#define MX50_PAD_SD2_D7__CCM_STOP				0x120 0x3cc 0x000 0x7 0x0
+#define MX50_PAD_SD2_WP__ESDHC2_WP				0x124 0x3d0 0x744 0x0 0x1
+#define MX50_PAD_SD2_WP__GPIO5_16				0x124 0x3d0 0x000 0x1 0x0
+#define MX50_PAD_SD2_WP__AUDMUX_AUD4_TXD			0x124 0x3d0 0x6c8 0x2 0x0
+#define MX50_PAD_SD2_WP__EIM_WEIM_D_4				0x124 0x3d0 0x7fc 0x4 0x0
+#define MX50_PAD_SD2_WP__CCM_WAIT				0x124 0x3d0 0x000 0x7 0x0
+#define MX50_PAD_SD2_CD__ESDHC2_CD				0x128 0x3d4 0x740 0x0 0x1
+#define MX50_PAD_SD2_CD__GPIO5_17				0x128 0x3d4 0x000 0x1 0x0
+#define MX50_PAD_SD2_CD__AUDMUX_AUD4_TXC			0x128 0x3d4 0x6d4 0x2 0x0
+#define MX50_PAD_SD2_CD__EIM_WEIM_D_5				0x128 0x3d4 0x800 0x4 0x0
+#define MX50_PAD_SD2_CD__CCM_REF_EN_B				0x128 0x3d4 0x000 0x7 0x0
+#define MX50_PAD_DISP_D0__ELCDIF_DAT_0				0x12c 0x40c 0x6fc 0x0 0x0
+#define MX50_PAD_DISP_D0__GPIO2_0				0x12c 0x40c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D0__FEC_TX_CLK				0x12c 0x40c 0x78c 0x2 0x0
+#define MX50_PAD_DISP_D0__EIM_WEIM_A_16				0x12c 0x40c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D0__SDMA_DEBUG_PC_0			0x12c 0x40c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D0__USBPHY1_VSTATUS_0			0x12c 0x40c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D1__ELCDIF_DAT_1				0x130 0x410 0x700 0x0 0x0
+#define MX50_PAD_DISP_D1__GPIO2_1				0x130 0x410 0x000 0x1 0x0
+#define MX50_PAD_DISP_D1__FEC_RX_ERR				0x130 0x410 0x788 0x2 0x0
+#define MX50_PAD_DISP_D1__EIM_WEIM_A_17				0x130 0x410 0x000 0x3 0x0
+#define MX50_PAD_DISP_D1__SDMA_DEBUG_PC_1			0x130 0x410 0x000 0x6 0x0
+#define MX50_PAD_DISP_D1__USBPHY1_VSTATUS_1			0x130 0x410 0x000 0x7 0x0
+#define MX50_PAD_DISP_D2__ELCDIF_DAT_2				0x134 0x414 0x704 0x0 0x0
+#define MX50_PAD_DISP_D2__GPIO2_2				0x134 0x414 0x000 0x1 0x0
+#define MX50_PAD_DISP_D2__FEC_RX_DV				0x134 0x414 0x784 0x2 0x0
+#define MX50_PAD_DISP_D2__EIM_WEIM_A_18				0x134 0x414 0x000 0x3 0x0
+#define MX50_PAD_DISP_D2__SDMA_DEBUG_PC_2			0x134 0x414 0x000 0x6 0x0
+#define MX50_PAD_DISP_D2__USBPHY1_VSTATUS_2			0x134 0x414 0x000 0x7 0x0
+#define MX50_PAD_DISP_D3__ELCDIF_DAT_3				0x138 0x418 0x708 0x0 0x0
+#define MX50_PAD_DISP_D3__GPIO2_3				0x138 0x418 0x000 0x1 0x0
+#define MX50_PAD_DISP_D3__FEC_RDATA_1				0x138 0x418 0x77c 0x2 0x0
+#define MX50_PAD_DISP_D3__EIM_WEIM_A_19				0x138 0x418 0x000 0x3 0x0
+#define MX50_PAD_DISP_D3__FEC_COL				0x138 0x418 0x770 0x4 0x1
+#define MX50_PAD_DISP_D3__SDMA_DEBUG_PC_3			0x138 0x418 0x000 0x6 0x0
+#define MX50_PAD_DISP_D3__USBPHY1_VSTATUS_3			0x138 0x418 0x000 0x7 0x0
+#define MX50_PAD_DISP_D4__ELCDIF_DAT_4				0x13c 0x41c 0x70c 0x0 0x0
+#define MX50_PAD_DISP_D4__GPIO2_4				0x13c 0x41c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D4__FEC_RDATA_0				0x13c 0x41c 0x778 0x2 0x0
+#define MX50_PAD_DISP_D4__EIM_WEIM_A_20				0x13c 0x41c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D4__SDMA_DEBUG_PC_4			0x13c 0x41c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D4__USBPHY1_VSTATUS_4			0x13c 0x41c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D5__ELCDIF_DAT_5				0x140 0x420 0x710 0x0 0x0
+#define MX50_PAD_DISP_D5__GPIO2_5				0x140 0x420 0x000 0x1 0x0
+#define MX50_PAD_DISP_D5__FEC_TX_EN				0x140 0x420 0x000 0x2 0x0
+#define MX50_PAD_DISP_D5__EIM_WEIM_A_21				0x140 0x420 0x000 0x3 0x0
+#define MX50_PAD_DISP_D5__SDMA_DEBUG_PC_5			0x140 0x420 0x000 0x6 0x0
+#define MX50_PAD_DISP_D5__USBPHY1_VSTATUS_5			0x140 0x420 0x000 0x7 0x0
+#define MX50_PAD_DISP_D6__ELCDIF_DAT_6				0x144 0x424 0x714 0x0 0x0
+#define MX50_PAD_DISP_D6__GPIO2_6				0x144 0x424 0x000 0x1 0x0
+#define MX50_PAD_DISP_D6__FEC_TDATA_1				0x144 0x424 0x000 0x2 0x0
+#define MX50_PAD_DISP_D6__EIM_WEIM_A_22				0x144 0x424 0x000 0x3 0x0
+#define MX50_PAD_DISP_D6__FEC_RX_CLK				0x144 0x424 0x780 0x4 0x1
+#define MX50_PAD_DISP_D6__SDMA_DEBUG_PC_6			0x144 0x424 0x000 0x6 0x0
+#define MX50_PAD_DISP_D6__USBPHY1_VSTATUS_6			0x144 0x424 0x000 0x7 0x0
+#define MX50_PAD_DISP_D7__ELCDIF_DAT_7				0x148 0x428 0x718 0x0 0x0
+#define MX50_PAD_DISP_D7__GPIO2_7				0x148 0x428 0x000 0x1 0x0
+#define MX50_PAD_DISP_D7__FEC_TDATA_0				0x148 0x428 0x000 0x2 0x0
+#define MX50_PAD_DISP_D7__EIM_WEIM_A_23				0x148 0x428 0x000 0x3 0x0
+#define MX50_PAD_DISP_D7__SDMA_DEBUG_PC_7			0x148 0x428 0x000 0x6 0x0
+#define MX50_PAD_DISP_D7__USBPHY1_VSTATUS_7			0x148 0x428 0x000 0x7 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_WR_RWN				0x14c 0x42c 0x000 0x0 0x0
+#define MX50_PAD_DISP_WR__GPIO2_16				0x14c 0x42c 0x000 0x1 0x0
+#define MX50_PAD_DISP_WR__ELCDIF_DOTCLK				0x14c 0x42c 0x000 0x2 0x0
+#define MX50_PAD_DISP_WR__EIM_WEIM_A_24				0x14c 0x42c 0x000 0x3 0x0
+#define MX50_PAD_DISP_WR__SDMA_DEBUG_PC_8			0x14c 0x42c 0x000 0x6 0x0
+#define MX50_PAD_DISP_WR__USBPHY1_AVALID			0x14c 0x42c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_RD_E				0x150 0x430 0x000 0x0 0x0
+#define MX50_PAD_DISP_RD__GPIO2_19				0x150 0x430 0x000 0x1 0x0
+#define MX50_PAD_DISP_RD__ELCDIF_ENABLE				0x150 0x430 0x000 0x2 0x0
+#define MX50_PAD_DISP_RD__EIM_WEIM_A_25				0x150 0x430 0x000 0x3 0x0
+#define MX50_PAD_DISP_RD__SDMA_DEBUG_PC_9			0x150 0x430 0x000 0x6 0x0
+#define MX50_PAD_DISP_RD__USBPHY1_BVALID			0x150 0x430 0x000 0x7 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_RS				0x154 0x434 0x000 0x0 0x0
+#define MX50_PAD_DISP_RS__GPIO2_17				0x154 0x434 0x000 0x1 0x0
+#define MX50_PAD_DISP_RS__ELCDIF_VSYNC				0x154 0x434 0x73c 0x2 0x1
+#define MX50_PAD_DISP_RS__EIM_WEIM_A_26				0x154 0x434 0x000 0x3 0x0
+#define MX50_PAD_DISP_RS__SDMA_DEBUG_PC_10			0x154 0x434 0x000 0x6 0x0
+#define MX50_PAD_DISP_RS__USBPHY1_ENDSESSION			0x154 0x434 0x000 0x7 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_CS				0x158 0x438 0x000 0x0 0x0
+#define MX50_PAD_DISP_CS__GPIO2_21				0x158 0x438 0x000 0x1 0x0
+#define MX50_PAD_DISP_CS__ELCDIF_HSYNC				0x158 0x438 0x6f8 0x2 0x1
+#define MX50_PAD_DISP_CS__EIM_WEIM_A_27				0x158 0x438 0x000 0x3 0x0
+#define MX50_PAD_DISP_CS__EIM_WEIM_CS_3				0x158 0x438 0x000 0x4 0x0
+#define MX50_PAD_DISP_CS__SDMA_DEBUG_PC_11			0x158 0x438 0x000 0x6 0x0
+#define MX50_PAD_DISP_CS__USBPHY1_IDDIG				0x158 0x438 0x000 0x7 0x0
+#define MX50_PAD_DISP_BUSY__ELCDIF_BUSY				0x15c 0x43c 0x6f8 0x0 0x2
+#define MX50_PAD_DISP_BUSY__GPIO2_18				0x15c 0x43c 0x000 0x1 0x0
+#define MX50_PAD_DISP_BUSY__EIM_WEIM_CS_3			0x15c 0x43c 0x000 0x4 0x0
+#define MX50_PAD_DISP_BUSY__SDMA_DEBUG_PC_12			0x15c 0x43c 0x000 0x6 0x0
+#define MX50_PAD_DISP_BUSY__USBPHY2_HOSTDISCONNECT		0x15c 0x43c 0x000 0x7 0x0
+#define MX50_PAD_DISP_RESET__ELCDIF_RESET			0x160 0x440 0x000 0x0 0x0
+#define MX50_PAD_DISP_RESET__GPIO2_20				0x160 0x440 0x000 0x1 0x0
+#define MX50_PAD_DISP_RESET__EIM_WEIM_CS_3			0x160 0x440 0x000 0x4 0x0
+#define MX50_PAD_DISP_RESET__SDMA_DEBUG_PC_13			0x160 0x440 0x000 0x6 0x0
+#define MX50_PAD_DISP_RESET__USBPHY2_BISTOK			0x160 0x440 0x000 0x7 0x0
+#define MX50_PAD_SD3_CMD__ESDHC3_CMD				0x164 0x444 0x000 0x0 0x0
+#define MX50_PAD_SD3_CMD__GPIO5_18				0x164 0x444 0x000 0x1 0x0
+#define MX50_PAD_SD3_CMD__EIM_NANDF_WRN				0x164 0x444 0x000 0x2 0x0
+#define MX50_PAD_SD3_CMD__SSP_CMD				0x164 0x444 0x000 0x3 0x0
+#define MX50_PAD_SD3_CLK__ESDHC3_CLK				0x168 0x448 0x000 0x0 0x0
+#define MX50_PAD_SD3_CLK__GPIO5_19				0x168 0x448 0x000 0x1 0x0
+#define MX50_PAD_SD3_CLK__EIM_NANDF_RDN				0x168 0x448 0x000 0x2 0x0
+#define MX50_PAD_SD3_CLK__SSP_CLK				0x168 0x448 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__ESDHC3_DAT0				0x16c 0x44c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D0__GPIO5_20				0x16c 0x44c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D0__EIM_NANDF_D_4				0x16c 0x44c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D0__SSP_D0					0x16c 0x44c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D0__CCM_PLL1_BYP				0x16c 0x44c 0x6dc 0x7 0x1
+#define MX50_PAD_SD3_D1__ESDHC3_DAT1				0x170 0x450 0x000 0x0 0x0
+#define MX50_PAD_SD3_D1__GPIO5_21				0x170 0x450 0x000 0x1 0x0
+#define MX50_PAD_SD3_D1__EIM_NANDF_D_5				0x170 0x450 0x000 0x2 0x0
+#define MX50_PAD_SD3_D1__SSP_D1					0x170 0x450 0x000 0x3 0x0
+#define MX50_PAD_SD3_D1__CCM_PLL2_BYP				0x170 0x450 0x000 0x7 0x0
+#define MX50_PAD_SD3_D2__ESDHC3_DAT2				0x174 0x454 0x000 0x0 0x0
+#define MX50_PAD_SD3_D2__GPIO5_22				0x174 0x454 0x000 0x1 0x0
+#define MX50_PAD_SD3_D2__EIM_NANDF_D_6				0x174 0x454 0x000 0x2 0x0
+#define MX50_PAD_SD3_D2__SSP_D2					0x174 0x454 0x000 0x3 0x0
+#define MX50_PAD_SD3_D2__CCM_PLL3_BYP				0x174 0x454 0x6e4 0x7 0x1
+#define MX50_PAD_SD3_D3__ESDHC3_DAT3				0x178 0x458 0x000 0x0 0x0
+#define MX50_PAD_SD3_D3__GPIO5_23				0x178 0x458 0x000 0x1 0x0
+#define MX50_PAD_SD3_D3__EIM_NANDF_D_7				0x178 0x458 0x000 0x2 0x0
+#define MX50_PAD_SD3_D3__SSP_D3					0x178 0x458 0x000 0x3 0x0
+#define MX50_PAD_SD3_D4__ESDHC3_DAT4				0x17c 0x45c 0x000 0x0 0x0
+#define MX50_PAD_SD3_D4__GPIO5_24				0x17c 0x45c 0x000 0x1 0x0
+#define MX50_PAD_SD3_D4__EIM_NANDF_D_0				0x17c 0x45c 0x000 0x2 0x0
+#define MX50_PAD_SD3_D4__SSP_D4					0x17c 0x45c 0x000 0x3 0x0
+#define MX50_PAD_SD3_D5__ESDHC3_DAT5				0x180 0x460 0x000 0x0 0x0
+#define MX50_PAD_SD3_D5__GPIO5_25				0x180 0x460 0x000 0x1 0x0
+#define MX50_PAD_SD3_D5__EIM_NANDF_D_1				0x180 0x460 0x000 0x2 0x0
+#define MX50_PAD_SD3_D5__SSP_D5					0x180 0x460 0x000 0x3 0x0
+#define MX50_PAD_SD3_D6__ESDHC3_DAT6				0x184 0x464 0x000 0x0 0x0
+#define MX50_PAD_SD3_D6__GPIO5_26				0x184 0x464 0x000 0x1 0x0
+#define MX50_PAD_SD3_D6__EIM_NANDF_D_2				0x184 0x464 0x000 0x2 0x0
+#define MX50_PAD_SD3_D6__SSP_D6					0x184 0x464 0x000 0x3 0x0
+#define MX50_PAD_SD3_D7__ESDHC3_DAT7				0x188 0x468 0x000 0x0 0x0
+#define MX50_PAD_SD3_D7__GPIO5_27				0x188 0x468 0x000 0x1 0x0
+#define MX50_PAD_SD3_D7__EIM_NANDF_D_3				0x188 0x468 0x000 0x2 0x0
+#define MX50_PAD_SD3_D7__SSP_D7					0x188 0x468 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC3_WP				0x18c 0x46C 0x000 0x0 0x0
+#define MX50_PAD_SD3_WP__GPIO5_28				0x18c 0x46C 0x000 0x1 0x0
+#define MX50_PAD_SD3_WP__EIM_NANDF_RESETN			0x18c 0x46C 0x000 0x2 0x0
+#define MX50_PAD_SD3_WP__SSP_CD					0x18c 0x46C 0x000 0x3 0x0
+#define MX50_PAD_SD3_WP__ESDHC4_LCTL				0x18c 0x46C 0x000 0x4 0x0
+#define MX50_PAD_SD3_WP__EIM_WEIM_CS_3				0x18c 0x46C 0x000 0x5 0x0
+#define MX50_PAD_DISP_D8__ELCDIF_DAT_8				0x190 0x470 0x71c 0x0 0x0
+#define MX50_PAD_DISP_D8__GPIO2_8				0x190 0x470 0x000 0x1 0x0
+#define MX50_PAD_DISP_D8__EIM_NANDF_CLE				0x190 0x470 0x000 0x2 0x0
+#define MX50_PAD_DISP_D8__ESDHC1_LCTL				0x190 0x470 0x000 0x3 0x0
+#define MX50_PAD_DISP_D8__ESDHC4_CMD				0x190 0x470 0x74c 0x4 0x2
+#define MX50_PAD_DISP_D8__KPP_COL_4				0x190 0x470 0x790 0x5 0x1
+#define MX50_PAD_DISP_D8__FEC_TX_CLK				0x190 0x470 0x78c 0x6 0x1
+#define MX50_PAD_DISP_D8__USBPHY1_DATAOUT_0			0x190 0x470 0x000 0x7 0x0
+#define MX50_PAD_DISP_D9__ELCDIF_DAT_9				0x194 0x474 0x720 0x0 0x0
+#define MX50_PAD_DISP_D9__GPIO2_9				0x194 0x474 0x000 0x1 0x0
+#define MX50_PAD_DISP_D9__EIM_NANDF_ALE				0x194 0x474 0x000 0x2 0x0
+#define MX50_PAD_DISP_D9__ESDHC2_LCTL				0x194 0x474 0x000 0x3 0x0
+#define MX50_PAD_DISP_D9__ESDHC4_CLK				0x194 0x474 0x748 0x4 0x2
+#define MX50_PAD_DISP_D9__KPP_ROW_4				0x194 0x474 0x7a0 0x5 0x1
+#define MX50_PAD_DISP_D9__FEC_RX_ER				0x194 0x474 0x788 0x6 0x1
+#define MX50_PAD_DISP_D9__USBPHY1_DATAOUT_1			0x194 0x474 0x000 0x7 0x0
+#define MX50_PAD_DISP_D10__ELCDIF_DAT_10			0x198 0x478 0x724 0x0 0x0
+#define MX50_PAD_DISP_D10__GPIO2_10				0x198 0x478 0x000 0x1 0x0
+#define MX50_PAD_DISP_D10__EIM_NANDF_CEN_0			0x198 0x478 0x000 0x2 0x0
+#define MX50_PAD_DISP_D10__ESDHC3_LCTL				0x198 0x478 0x000 0x3 0x0
+#define MX50_PAD_DISP_D10__ESDHC4_DAT0				0x198 0x478 0x000 0x4 0x0
+#define MX50_PAD_DISP_D10__KPP_COL_5				0x198 0x478 0x794 0x5 0x1
+#define MX50_PAD_DISP_D10__FEC_RX_DV				0x198 0x478 0x784 0x6 0x1
+#define MX50_PAD_DISP_D10__USBPHY1_DATAOUT_2			0x198 0x478 0x000 0x7 0x0
+#define MX50_PAD_DISP_D11__ELCDIF_DAT_11			0x19c 0x47c 0x728 0x0 0x0
+#define MX50_PAD_DISP_D11__GPIO2_11				0x19c 0x47c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D11__EIM_NANDF_CEN_1			0x19c 0x47c 0x000 0x2 0x0
+#define MX50_PAD_DISP_D11__ESDHC4_DAT1				0x19c 0x47c 0x754 0x4 0x1
+#define MX50_PAD_DISP_D11__KPP_ROW_5				0x19c 0x47c 0x7a4 0x5 0x1
+#define MX50_PAD_DISP_D11__FEC_RDATA_1				0x19c 0x47c 0x77c 0x6 0x1
+#define MX50_PAD_DISP_D11__USBPHY1_DATAOUT_3			0x19c 0x47c 0x000 0x7 0x0
+#define MX50_PAD_DISP_D12__ELCDIF_DAT_12			0x1a0 0x480 0x72c 0x0 0x0
+#define MX50_PAD_DISP_D12__GPIO2_12				0x1a0 0x480 0x000 0x1 0x0
+#define MX50_PAD_DISP_D12__EIM_NANDF_CEN_2			0x1a0 0x480 0x000 0x2 0x0
+#define MX50_PAD_DISP_D12__ESDHC1_CD				0x1a0 0x480 0x000 0x3 0x0
+#define MX50_PAD_DISP_D12__ESDHC4_DAT2				0x1a0 0x480 0x758 0x4 0x1
+#define MX50_PAD_DISP_D12__KPP_COL_6				0x1a0 0x480 0x798 0x5 0x1
+#define MX50_PAD_DISP_D12__FEC_RDATA_0				0x1a0 0x480 0x778 0x6 0x1
+#define MX50_PAD_DISP_D12__USBPHY1_DATAOUT_4			0x1a0 0x480 0x000 0x7 0x0
+#define MX50_PAD_DISP_D13__ELCDIF_DAT_13			0x1a4 0x484 0x730 0x0 0x0
+#define MX50_PAD_DISP_D13__GPIO2_13				0x1a4 0x484 0x000 0x1 0x0
+#define MX50_PAD_DISP_D13__EIM_NANDF_CEN_3			0x1a4 0x484 0x000 0x2 0x0
+#define MX50_PAD_DISP_D13__ESDHC3_CD				0x1a4 0x484 0x000 0x3 0x0
+#define MX50_PAD_DISP_D13__ESDHC4_DAT3				0x1a4 0x484 0x75c 0x4 0x1
+#define MX50_PAD_DISP_D13__KPP_ROW_6				0x1a4 0x484 0x7a8 0x5 0x1
+#define MX50_PAD_DISP_D13__FEC_TX_EN				0x1a4 0x484 0x000 0x6 0x0
+#define MX50_PAD_DISP_D13__USBPHY1_DATAOUT_5			0x1a4 0x484 0x000 0x7 0x0
+#define MX50_PAD_DISP_D14__ELCDIF_DAT_14			0x1a8 0x488 0x734 0x0 0x0
+#define MX50_PAD_DISP_D14__GPIO2_14				0x1a8 0x488 0x000 0x1 0x0
+#define MX50_PAD_DISP_D14__EIM_NANDF_READY0			0x1a8 0x488 0x7b4 0x2 0x1
+#define MX50_PAD_DISP_D14__ESDHC1_WP				0x1a8 0x488 0x000 0x3 0x0
+#define MX50_PAD_DISP_D14__ESDHC4_WP				0x1a8 0x488 0x000 0x4 0x0
+#define MX50_PAD_DISP_D14__KPP_COL_7				0x1a8 0x488 0x79c 0x5 0x1
+#define MX50_PAD_DISP_D14__FEC_TDATA_1				0x1a8 0x488 0x000 0x6 0x0
+#define MX50_PAD_DISP_D14__USBPHY1_DATAOUT_6			0x1a8 0x488 0x000 0x7 0x0
+#define MX50_PAD_DISP_D15__ELCDIF_DAT_15			0x1ac 0x48c 0x738 0x0 0x0
+#define MX50_PAD_DISP_D15__GPIO2_15				0x1ac 0x48c 0x000 0x1 0x0
+#define MX50_PAD_DISP_D15__EIM_NANDF_DQS			0x1ac 0x48c 0x7b0 0x2 0x1
+#define MX50_PAD_DISP_D15__ESDHC3_RST				0x1ac 0x48c 0x000 0x3 0x0
+#define MX50_PAD_DISP_D15__ESDHC4_CD				0x1ac 0x48c 0x000 0x4 0x0
+#define MX50_PAD_DISP_D15__KPP_ROW_7				0x1ac 0x48c 0x7ac 0x5 0x1
+#define MX50_PAD_DISP_D15__FEC_TDATA_0				0x1ac 0x48c 0x000 0x6 0x0
+#define MX50_PAD_DISP_D15__USBPHY1_DATAOUT_7			0x1ac 0x48c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D0__EPDC_SDDO_0				0x1b0 0x54c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D0__GPIO3_0				0x1b0 0x54c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D0__EIM_WEIM_D_0				0x1b0 0x54c 0x7ec 0x2 0x1
+#define MX50_PAD_EPDC_D0__ELCDIF_RS				0x1b0 0x54c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D0__ELCDIF_DOTCLK				0x1b0 0x54c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D0__SDMA_DEBUG_EVT_CHN_LINES_0		0x1b0 0x54c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D0__USBPHY2_DATAOUT_0			0x1b0 0x54c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D1__EPDC_SDDO_1				0x1b4 0x550 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D1__GPIO3_1				0x1b4 0x550 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D1__EIM_WEIM_D_1				0x1b4 0x550 0x7f0 0x2 0x1
+#define MX50_PAD_EPDC_D1__ELCDIF_CS				0x1b4 0x550 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D1__ELCDIF_ENABLE				0x1b4 0x550 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D1__SDMA_DEBUG_EVT_CHN_LINES_1		0x1b4 0x550 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D1__USBPHY2_DATAOUT_1			0x1b4 0x550 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D2__EPDC_SDDO_2				0x1b8 0x554 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D2__GPIO3_2				0x1b8 0x554 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D2__EIM_WEIM_D_2				0x1b8 0x554 0x7f4 0x2 0x1
+#define MX50_PAD_EPDC_D2__ELCDIF_WR_RWN				0x1b8 0x554 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC				0x1b8 0x554 0x73c 0x4 0x2
+#define MX50_PAD_EPDC_D2__SDMA_DEBUG_EVT_CHN_LINES_2		0x1b8 0x554 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D2__USBPHY2_DATAOUT_2			0x1b8 0x554 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D3__EPDC_SDDO_3				0x1bc 0x558 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D3__GPIO3_3				0x1bc 0x558 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D3__EIM_WEIM_D_3				0x1bc 0x558 0x7f8 0x2 0x1
+#define MX50_PAD_EPDC_D3__ELCDIF_RD_E				0x1bc 0x558 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC				0x1bc 0x558 0x6f8 0x4 0x3
+#define MX50_PAD_EPDC_D3__SDMA_DEBUG_EVT_CHN_LINES_3		0x1bc 0x558 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D3__USBPHY2_DATAOUT_3			0x1bc 0x558 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D4__EPDC_SDDO_4				0x1c0 0x55c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D4__GPIO3_4				0x1c0 0x55c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D4__EIM_WEIM_D_4				0x1c0 0x55c 0x7fc 0x2 0x1
+#define MX50_PAD_EPDC_D4__SDMA_DEBUG_EVT_CHN_LINES_4		0x1c0 0x55c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D4__USBPHY2_DATAOUT_4			0x1c0 0x55c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D5__EPDC_SDDO_5				0x1c4 0x560 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D5__GPIO3_5				0x1c4 0x560 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D5__EIM_WEIM_D_5				0x1c4 0x560 0x800 0x2 0x1
+#define MX50_PAD_EPDC_D5__SDMA_DEBUG_EVT_CHN_LINES_5		0x1c4 0x560 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D5__USBPHY2_DATAOUT_5			0x1c4 0x560 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D6__EPDC_SDDO_6				0x1c8 0x564 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D6__GPIO3_6				0x1c8 0x564 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D6__EIM_WEIM_D_6				0x1c8 0x564 0x804 0x2 0x1
+#define MX50_PAD_EPDC_D6__SDMA_DEBUG_EVT_CHN_LINES_6		0x1c8 0x564 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D6__USBPHY2_DATAOUT_6			0x1c8 0x564 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D7__EPDC_SDDO_7				0x1cc 0x568 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D7__GPIO3_7				0x1cc 0x568 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D7__EIM_WEIM_D_7				0x1cc 0x568 0x808 0x2 0x1
+#define MX50_PAD_EPDC_D7__SDMA_DEBUG_EVT_CHN_LINES_7		0x1cc 0x568 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D7__USBPHY2_DATAOUT_7			0x1cc 0x568 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D8__EPDC_SDDO_8				0x1d0 0x56c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D8__GPIO3_8				0x1d0 0x56c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D8__EIM_WEIM_D_8				0x1d0 0x56c 0x80c 0x2 0x2
+#define MX50_PAD_EPDC_D8__ELCDIF_DAT_24				0x1d0 0x56c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D8__SDMA_DEBUG_MATCHED_DMBUS		0x1d0 0x56c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D8__USBPHY2_VSTATUS_0			0x1d0 0x56c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D9__EPDC_SDDO_9				0x1d4 0x570 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D9__GPIO3_9				0x1d4 0x570 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D9__EIM_WEIM_D_9				0x1d4 0x570 0x810 0x2 0x2
+#define MX50_PAD_EPDC_D9__ELCDIF_DAT_25				0x1d4 0x570 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D9__SDMA_DEBUG_EVENT_CHANNEL_SEL		0x1d4 0x570 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D9__USBPHY2_VSTATUS_1			0x1d4 0x570 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D10__EPDC_SDDO_10				0x1d8 0x574 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D10__GPIO3_10				0x1d8 0x574 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D10__EIM_WEIM_D_10			0x1d8 0x574 0x814 0x2 0x2
+#define MX50_PAD_EPDC_D10__ELCDIF_DAT_26			0x1d8 0x574 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D10__SDMA_DEBUG_EVENT_CHANNEL_0		0x1d8 0x574 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D10__USBPHY2_VSTATUS_2			0x1d8 0x574 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D11__EPDC_SDDO_11				0x1dc 0x578 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D11__GPIO3_11				0x1dc 0x578 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D11__EIM_WEIM_D_11			0x1dc 0x578 0x818 0x2 0x2
+#define MX50_PAD_EPDC_D11__ELCDIF_DAT_27			0x1dc 0x578 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D11__SDMA_DEBUG_EVENT_CHANNEL_1		0x1dc 0x578 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D11__USBPHY2_VSTATUS_3			0x1dc 0x578 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D12__EPDC_SDDO_12				0x1e0 0x57c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D12__GPIO3_12				0x1e0 0x57c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D12__EIM_WEIM_D_12			0x1e0 0x57c 0x81c 0x2 0x1
+#define MX50_PAD_EPDC_D12__ELCDIF_DAT_28			0x1e0 0x57c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D12__SDMA_DEBUG_EVENT_CHANNEL_2		0x1e0 0x57c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D12__USBPHY2_VSTATUS_4			0x1e0 0x57c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D13__EPDC_SDDO_13				0x1e4 0x580 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D13__GPIO3_13				0x1e4 0x580 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D13__EIM_WEIM_D_13			0x1e4 0x580 0x820 0x2 0x1
+#define MX50_PAD_EPDC_D13__ELCDIF_DAT_29			0x1e4 0x580 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D13__SDMA_DEBUG_EVENT_CHANNEL_3		0x1e4 0x580 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D13__USBPHY2_VSTATUS_5			0x1e4 0x580 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D14__EPDC_SDDO_14				0x1e8 0x584 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D14__GPIO3_14				0x1e8 0x584 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D14__EIM_WEIM_D_14			0x1e8 0x584 0x824 0x2 0x1
+#define MX50_PAD_EPDC_D14__ELCDIF_DAT_30			0x1e8 0x584 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D14__AUDMUX_AUD6_TXD			0x1e8 0x584 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D14__SDMA_DEBUG_EVENT_CHANNEL_4		0x1e8 0x584 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D14__USBPHY2_VSTATUS_6			0x1e8 0x584 0x000 0x7 0x0
+#define MX50_PAD_EPDC_D15__EPDC_SDDO_15				0x1ec 0x588 0x000 0x0 0x0
+#define MX50_PAD_EPDC_D15__GPIO3_15				0x1ec 0x588 0x000 0x1 0x0
+#define MX50_PAD_EPDC_D15__EIM_WEIM_D_15			0x1ec 0x588 0x828 0x2 0x1
+#define MX50_PAD_EPDC_D15__ELCDIF_DAT_31			0x1ec 0x588 0x000 0x3 0x0
+#define MX50_PAD_EPDC_D15__AUDMUX_AUD6_TXC			0x1ec 0x588 0x000 0x4 0x0
+#define MX50_PAD_EPDC_D15__SDMA_DEBUG_EVENT_CHANNEL_5		0x1ec 0x588 0x000 0x6 0x0
+#define MX50_PAD_EPDC_D15__USBPHY2_VSTATUS_7			0x1ec 0x588 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK				0x1f0 0x58c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDCLK__GPIO3_16				0x1f0 0x58c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDCLK__EIM_WEIM_D_16			0x1f0 0x58c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDCLK__ELCDIF_DAT_16			0x1f0 0x58c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDCLK__AUDMUX_AUD6_TXFS			0x1f0 0x58c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDCLK__SDMA_DEBUG_CORE_STATE_0		0x1f0 0x58c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDCLK__USBPHY2_BISTOK			0x1f0 0x58c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDSP__EPCD_GDSP				0x1f4 0x590 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDSP__GPIO3_17				0x1f4 0x590 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDSP__EIM_WEIM_D_17			0x1f4 0x590 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDSP__ELCDIF_DAT_17			0x1f4 0x590 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDSP__AUDMUX_AUD6_RXD			0x1f4 0x590 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDSP__SDMA_DEBUG_CORE_STATE_1		0x1f4 0x590 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDSP__USBPHY2_BVALID			0x1f4 0x590 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDOE__EPCD_GDOE				0x1f8 0x594 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDOE__GPIO3_18				0x1f8 0x594 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDOE__EIM_WEIM_D_18			0x1f8 0x594 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDOE__ELCDIF_DAT_18			0x1f8 0x594 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDOE__AUDMUX_AUD6_RXC			0x1f8 0x594 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDOE__SDMA_DEBUG_CORE_STATE_2		0x1f8 0x594 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDOE__USBPHY2_ENDSESSION			0x1f8 0x594 0x000 0x7 0x0
+#define MX50_PAD_EPDC_GDRL__EPCD_GDRL				0x1fc 0x598 0x000 0x0 0x0
+#define MX50_PAD_EPDC_GDRL__GPIO3_19				0x1fc 0x598 0x000 0x1 0x0
+#define MX50_PAD_EPDC_GDRL__EIM_WEIM_D_19			0x1f8 0x598 0x000 0x2 0x0
+#define MX50_PAD_EPDC_GDRL__ELCDIF_DAT_19			0x1fc 0x598 0x000 0x3 0x0
+#define MX50_PAD_EPDC_GDRL__AUDMUX_AUD6_RXFS			0x1fc 0x598 0x000 0x4 0x0
+#define MX50_PAD_EPDC_GDRL__SDMA_DEBUG_CORE_STATE_3		0x1fc 0x598 0x000 0x6 0x0
+#define MX50_PAD_EPDC_GDRL__USBPHY2_IDDIG			0x1fc 0x598 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLK__EPCD_SDCLK				0x200 0x59c 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLK__GPIO3_20				0x200 0x59c 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLK__EIM_WEIM_D_20			0x200 0x59c 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLK__ELCDIF_DAT_20			0x200 0x59c 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDCLK__AUDMUX_AUD5_TXD			0x200 0x59c 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLK__SDMA_DEBUG_BUS_DEVICE_0		0x200 0x59c 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLK__USBPHY2_HOSTDISCONNECT		0x200 0x59c 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOEZ__EPCD_SDOEZ				0x204 0x5a0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOEZ__GPIO3_21				0x204 0x5a0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOEZ__EIM_WEIM_D_21			0x204 0x5a0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOEZ__ELCDIF_DAT_21			0x204 0x5a0 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOEZ__AUDMUX_AUD5_TXC			0x204 0x5a0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOEZ__SDMA_DEBUG_BUS_DEVICE_1		0x204 0x5a0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOEZ__USBPHY2_TXREADY			0x204 0x5a0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOED__EPCD_SDOED				0x208 0x5a4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOED__GPIO3_22				0x208 0x5a4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOED__EIM_WEIM_D_22			0x208 0x5a4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOED__ELCDIF_DAT_22			0x208 0x5a4 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOED__AUDMUX_AUD5_TXFS			0x208 0x5a4 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOED__SDMA_DEBUG_BUS_DEVICE_2		0x208 0x5a4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOED__USBPHY2_RXVALID			0x208 0x5a4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDOE__EPCD_SDOE				0x20c 0x5a8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDOE__GPIO3_23				0x20c 0x5a8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDOE__EIM_WEIM_D_23			0x20c 0x5a8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDOE__ELCDIF_DAT_23			0x20c 0x5a8 0x000 0x3 0x0
+#define MX50_PAD_EPDC_SDOE__AUDMUX_AUD5_RXD			0x20c 0x5a8 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDOE__SDMA_DEBUG_BUS_DEVICE_3		0x20c 0x5a8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDOE__USBPHY2_RXACTIVE			0x20c 0x5a8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDLE__EPCD_SDLE				0x210 0x5ac 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDLE__GPIO3_24				0x210 0x5ac 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDLE__EIM_WEIM_D_24			0x210 0x5ac 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDLE__ELCDIF_DAT_8			0x210 0x5ac 0x71c 0x3 0x1
+#define MX50_PAD_EPDC_SDLE__AUDMUX_AUD5_RXC			0x210 0x5ac 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDLE__SDMA_DEBUG_BUS_DEVICE_4		0x210 0x5ac 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDLE__USBPHY2_RXERROR			0x210 0x5ac 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDCLKN__EPCD_SDCLKN			0x214 0x5b0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCLKN__GPIO3_25				0x214 0x5b0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCLKN__EIM_WEIM_D_25			0x214 0x5b0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDCLKN__ELCDIF_DAT_9			0x214 0x5b0 0x720 0x3 0x1
+#define MX50_PAD_EPDC_SDCLKN__AUDMUX_AUD5_RXFS			0x214 0x5b0 0x000 0x4 0x0
+#define MX50_PAD_EPDC_SDCLKN__SDMA_DEBUG_BUS_ERROR		0x214 0x5b0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDCLKN__USBPHY2_SIECLOCK			0x214 0x5b0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_SDSHR__EPCD_SDSHR				0x218 0x5b4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDSHR__GPIO3_26				0x218 0x5b4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDSHR__EIM_WEIM_D_26			0x218 0x5b4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_SDSHR__ELCDIF_DAT_10			0x218 0x5b4 0x724 0x3 0x1
+#define MX50_PAD_EPDC_SDSHR__AUDMUX_AUD4_TXD			0x218 0x5b4 0x6c8 0x4 0x1
+#define MX50_PAD_EPDC_SDSHR__SDMA_DEBUG_BUS_RWB			0x218 0x5b4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_SDSHR__USBPHY2_LINESTATE_0		0x218 0x5b4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCOM__EPCD_PWRCOM			0x21c 0x5b8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCOM__GPIO3_27				0x21c 0x5b8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCOM__EIM_WEIM_D_27			0x21c 0x5b8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCOM__ELCDIF_DAT_11			0x21c 0x5b8 0x728 0x3 0x1
+#define MX50_PAD_EPDC_PWRCOM__AUDMUX_AUD4_TXC			0x21c 0x5b8 0x6d4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCOM__SDMA_DEBUG_CORE_RUN		0x21c 0x5b8 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCOM__USBPHY2_LINESTATE_1		0x21c 0x5b8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EPCD_PWRSTAT			0x220 0x5bc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRSTAT__GPIO3_28				0x220 0x5bc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRSTAT__EIM_WEIM_D_28			0x220 0x5bc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_DAT_12			0x220 0x5bc 0x72c 0x3 0x1
+#define MX50_PAD_EPDC_PWRSTAT__AUDMUX_AUD4_TXFS			0x220 0x5bc 0x6d8 0x4 0x1
+#define MX50_PAD_EPDC_PWRSTAT__SDMA_DEBUG_MODE			0x220 0x5bc 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRSTAT__USBPHY2_VBUSVALID		0x220 0x5bc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EPCD_PWRCTRL0			0x224 0x5c0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__GPIO3_29			0x224 0x5c0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__EIM_WEIM_D_29			0x224 0x5c0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_DAT_13			0x224 0x5c0 0x730 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__AUDMUX_AUD4_RXD			0x224 0x5c0 0x6c4 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL0__SDMA_DEBUG_RTBUFFER_WRITE	0x224 0x5c0 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL0__USBPHY2_AVALID			0x224 0x5c0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EPCD_PWRCTRL1			0x228 0x5c4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__GPIO3_30			0x228 0x5c4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__EIM_WEIM_D_30			0x228 0x5c4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_DAT_14			0x228 0x5c4 0x734 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__AUDMUX_AUD4_RXC			0x228 0x5c4 0x6cc 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL1__SDMA_DEBUG_YIELD		0x228 0x5c4 0x000 0x6 0x0
+#define MX50_PAD_EPDC_PWRCTRL1__USBPHY1_ONBIST			0x228 0x5c4 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EPCD_PWRCTRL2			0x22c 0x5c8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__GPIO3_31			0x22c 0x5c8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__EIM_WEIM_D_31			0x22c 0x5c8 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_DAT_15			0x22c 0x5c8 0x738 0x3 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__AUDMUX_AUD4_RXFS		0x22c 0x5c8 0x6d0 0x4 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT_EVENT_0		0x22c 0x5c8 0x7b8 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL2__USBPHY2_ONBIST			0x22c 0x5c8 0x000 0x7 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EPCD_PWRCTRL3			0x230 0x5cc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__GPIO4_20			0x230 0x5cc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__EIM_WEIM_EB_2			0x230 0x5cc 0x000 0x2 0x0
+#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT_EVENT_1		0x230 0x5cc 0x7bc 0x6 0x1
+#define MX50_PAD_EPDC_PWRCTRL3__USBPHY1_BISTOK			0x230 0x5cc 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM0__EPCD_VCOM_0			0x234 0x5d0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM0__GPIO4_21				0x234 0x5d0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM0__EIM_WEIM_EB_3			0x234 0x5d0 0x000 0x2 0x0
+#define MX50_PAD_EPDC_VCOM0__USBPHY2_BISTOK			0x234 0x5d0 0x000 0x7 0x0
+#define MX50_PAD_EPDC_VCOM1__EPCD_VCOM_1			0x238 0x5d4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_VCOM1__GPIO4_22				0x238 0x5d4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_VCOM1__EIM_WEIM_CS_3			0x238 0x5d4 0x000 0x2 0x0
+#define MX50_PAD_EPDC_BDR0__EPCD_BDR_0				0x23c 0x5d8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR0__GPIO4_23				0x23c 0x5d8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR0__ELCDIF_DAT_7			0x23c 0x5d8 0x718 0x3 0x1
+#define MX50_PAD_EPDC_BDR1__EPCD_BDR_1				0x240 0x5dc 0x000 0x0 0x0
+#define MX50_PAD_EPDC_BDR1__GPIO4_24				0x240 0x5dc 0x000 0x1 0x0
+#define MX50_PAD_EPDC_BDR1__ELCDIF_DAT_6			0x240 0x5dc 0x714 0x3 0x1
+#define MX50_PAD_EPDC_SDCE0__EPCD_SDCE_0			0x244 0x5e0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE0__GPIO4_25				0x244 0x5e0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE0__ELCDIF_DAT_5			0x244 0x5e0 0x710 0x3 0x1
+#define MX50_PAD_EPDC_SDCE1__EPCD_SDCE_1			0x248 0x5e4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE1__GPIO4_26				0x248 0x5e4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE1__ELCDIF_DAT_4			0x248 0x5e4 0x70c 0x3 0x0
+#define MX50_PAD_EPDC_SDCE2__EPCD_SDCE_2			0x24c 0x5e8 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE2__GPIO4_27				0x24c 0x5e8 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT_3			0x24c 0x5e8 0x708 0x3 0x1
+#define MX50_PAD_EPDC_SDCE3__EPCD_SDCE_3			0x250 0x5ec 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE3__GPIO4_28				0x250 0x5ec 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE3__ELCDIF_DAT_2			0x250 0x5ec 0x704 0x3 0x1
+#define MX50_PAD_EPDC_SDCE4__EPCD_SDCE_4			0x254 0x5f0 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE4__GPIO4_29				0x254 0x5f0 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE4__ELCDIF_DAT_1			0x254 0x5f0 0x700 0x3 0x1
+#define MX50_PAD_EPDC_SDCE5__EPCD_SDCE_5			0x258 0x5f4 0x000 0x0 0x0
+#define MX50_PAD_EPDC_SDCE5__GPIO4_30				0x258 0x5f4 0x000 0x1 0x0
+#define MX50_PAD_EPDC_SDCE5__ELCDIF_DAT_0			0x258 0x5f4 0x6fc 0x3 0x1
+#define MX50_PAD_EIM_DA0__EIM_WEIM_A_0				0x25c 0x5f8 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA0__GPIO1_0				0x25c 0x5f8 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA0__KPP_COL_4				0x25c 0x5f8 0x790 0x3 0x2
+#define MX50_PAD_EIM_DA0__TPIU_TRACE_0				0x25c 0x5f8 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA0__SRC_BT_CFG1_0				0x25c 0x5f8 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA1__EIM_WEIM_A_1				0x260 0x5fc 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA1__GPIO1_1				0x260 0x5fc 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA1__KPP_ROW_4				0x260 0x5fc 0x7a0 0x3 0x2
+#define MX50_PAD_EIM_DA1__TPIU_TRACE_1				0x260 0x5fc 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA1__SRC_BT_CFG1_1				0x260 0x5fc 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA2__EIM_WEIM_A_2				0x264 0x600 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA2__GPIO1_2				0x264 0x600 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA2__KPP_COL_5				0x264 0x600 0x794 0x3 0x2
+#define MX50_PAD_EIM_DA2__TPIU_TRACE_2				0x264 0x600 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA2__SRC_BT_CFG1_2				0x264 0x600 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA3__EIM_WEIM_A_3				0x268 0x604 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA3__GPIO1_3				0x268 0x604 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA3__KPP_ROW_5				0x268 0x604 0x7a4 0x3 0x2
+#define MX50_PAD_EIM_DA3__TPIU_TRACE_3				0x268 0x604 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA3__SRC_BT_CFG1_3				0x268 0x604 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA4__EIM_WEIM_A_4				0x26c 0x608 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA4__GPIO1_4				0x26c 0x608 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA4__KPP_COL_6				0x26c 0x608 0x798 0x3 0x2
+#define MX50_PAD_EIM_DA4__TPIU_TRACE_4				0x26c 0x608 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA4__SRC_BT_CFG1_4				0x26c 0x608 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA5__EIM_WEIM_A_5				0x270 0x60c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA5__GPIO1_5				0x270 0x60c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA5__KPP_ROW_6				0x270 0x60c 0x7a8 0x3 0x2
+#define MX50_PAD_EIM_DA5__TPIU_TRACE_5				0x270 0x60c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA5__SRC_BT_CFG1_5				0x270 0x60c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA6__EIM_WEIM_A_6				0x274 0x610 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA6__GPIO1_6				0x274 0x610 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA6__KPP_COL_7				0x274 0x610 0x79c 0x3 0x2
+#define MX50_PAD_EIM_DA6__TPIU_TRACE_6				0x274 0x610 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA6__SRC_BT_CFG1_6				0x274 0x610 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA7__EIM_WEIM_A_7				0x278 0x614 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA7__GPIO1_7				0x278 0x614 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA7__KPP_ROW_7				0x278 0x614 0x7ac 0x3 0x2
+#define MX50_PAD_EIM_DA7__TPIU_TRACE_7				0x278 0x614 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA7__SRC_BT_CFG1_7				0x278 0x614 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA8__EIM_WEIM_A_8				0x27c 0x618 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA8__GPIO1_8				0x27c 0x618 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA8__EIM_NANDF_CLE				0x27c 0x618 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA8__TPIU_TRACE_8				0x27c 0x618 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA8__SRC_BT_CFG2_0				0x27c 0x618 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA9__EIM_WEIM_A_9				0x280 0x61c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA9__GPIO1_9				0x280 0x61c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA9__EIM_NANDF_ALE				0x280 0x61c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA9__TPIU_TRACE_9				0x280 0x61c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA9__SRC_BT_CFG2_1				0x280 0x61c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA10__EIM_WEIM_A_10			0x284 0x620 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA10__GPIO1_10				0x284 0x620 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA10__EIM_NANDF_CEN_0			0x284 0x620 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA10__TPIU_TRACE_10			0x284 0x620 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA10__SRC_BT_CFG2_2			0x284 0x620 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA11__EIM_WEIM_A_11			0x288 0x624 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA11__GPIO1_11				0x288 0x624 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA11__EIM_NANDF_CEN_1			0x288 0x624 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA11__TPIU_TRACE_11			0x288 0x624 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA11__SRC_BT_CFG2_3			0x288 0x624 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA12__EIM_WEIM_A_12			0x28c 0x628 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA12__GPIO1_12				0x28c 0x628 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA12__EIM_NANDF_CEN_2			0x28c 0x628 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA12__EPDC_SDCE_6				0x28c 0x628 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA12__TPIU_TRACE_12			0x28c 0x628 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA12__SRC_BT_CFG2_4			0x28c 0x628 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA13__EIM_WEIM_A_13			0x290 0x62c 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA13__GPIO1_13				0x290 0x62c 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA13__EIM_NANDF_CEN_3			0x290 0x62c 0x000 0x2 0x0
+#define MX50_PAD_EIM_DA13__EPDC_SDCE_7				0x290 0x62c 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA13__TPIU_TRACE_13			0x290 0x62c 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA13__SRC_BT_CFG2_5			0x290 0x62c 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA14__EIM_WEIM_A_14			0x294 0x630 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA14__GPIO1_14				0x294 0x630 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA14__EIM_NANDF_READY0			0x294 0x630 0x7b4 0x2 0x2
+#define MX50_PAD_EIM_DA14__EPDC_SDCE_8				0x294 0x630 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA14__TPIU_TRACE_14			0x294 0x630 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA14__SRC_BT_CFG2_6			0x294 0x630 0x000 0x7 0x0
+#define MX50_PAD_EIM_DA15__EIM_WEIM_A_15			0x298 0x634 0x000 0x0 0x0
+#define MX50_PAD_EIM_DA15__GPIO1_15				0x298 0x634 0x000 0x1 0x0
+#define MX50_PAD_EIM_DA15__EIM_NANDF_DQS			0x298 0x634 0x7b0 0x2 0x2
+#define MX50_PAD_EIM_DA15__EPDC_SDCE_9				0x298 0x634 0x000 0x3 0x0
+#define MX50_PAD_EIM_DA15__TPIU_TRACE_15			0x298 0x634 0x000 0x6 0x0
+#define MX50_PAD_EIM_DA15__SRC_BT_CFG2_7			0x298 0x634 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_CS_2				0x29c 0x638 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS2__GPIO1_16				0x29c 0x638 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS2__EIM_WEIM_A_27				0x29c 0x638 0x000 0x2 0x0
+#define MX50_PAD_EIM_CS2__TPIU_TRCLK				0x29c 0x638 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS2__SRC_BT_CFG3_0				0x29c 0x638 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS1__EIM_WEIM_CS_1				0x2a0 0x63c 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS1__GPIO1_17				0x2a0 0x63c 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS1__TPIU_TRCTL				0x2a0 0x63c 0x000 0x6 0x0
+#define MX50_PAD_EIM_CS1__SRC_BT_CFG3_1				0x2a0 0x63c 0x000 0x7 0x0
+#define MX50_PAD_EIM_CS0__EIM_WEIM_CS_0				0x2a4 0x640 0x000 0x0 0x0
+#define MX50_PAD_EIM_CS0__GPIO1_18				0x2a4 0x640 0x000 0x1 0x0
+#define MX50_PAD_EIM_CS0__SRC_BT_CFG3_2				0x2a4 0x640 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB0__EIM_WEIM_EB_0				0x2a8 0x644 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB0__GPIO1_19				0x2a8 0x644 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB0__SRC_BT_CFG3_3				0x2a8 0x644 0x000 0x7 0x0
+#define MX50_PAD_EIM_EB1__EIM_WEIM_EB_1				0x2ac 0x648 0x000 0x0 0x0
+#define MX50_PAD_EIM_EB1__GPIO1_20				0x2ac 0x648 0x000 0x1 0x0
+#define MX50_PAD_EIM_EB1__SRC_BT_CFG3_4				0x2ac 0x648 0x000 0x7 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_WAIT			0x2b0 0x64c 0x000 0x0 0x0
+#define MX50_PAD_EIM_WAIT__GPIO1_21				0x2b0 0x64c 0x000 0x1 0x0
+#define MX50_PAD_EIM_WAIT__EIM_WEIM_DTACK_B			0x2b0 0x64c 0x000 0x2 0x0
+#define MX50_PAD_EIM_WAIT__SRC_BT_CFG3_5			0x2b0 0x64c 0x000 0x7 0x0
+#define MX50_PAD_EIM_BCLK__EIM_WEIM_BCLK			0x2b4 0x650 0x000 0x0 0x0
+#define MX50_PAD_EIM_BCLK__GPIO1_22				0x2b4 0x650 0x000 0x1 0x0
+#define MX50_PAD_EIM_BCLK__SRC_BT_CFG3_6			0x2b4 0x650 0x000 0x7 0x0
+#define MX50_PAD_EIM_RDY__EIM_WEIM_RDY				0x2b8 0x654 0x000 0x0 0x0
+#define MX50_PAD_EIM_RDY__GPIO1_23				0x2b8 0x654 0x000 0x1 0x0
+#define MX50_PAD_EIM_RDY__SRC_BT_CFG3_7				0x2b8 0x654 0x000 0x7 0x0
+#define MX50_PAD_EIM_OE__EIM_WEIM_OE				0x2bc 0x658 0x000 0x0 0x0
+#define MX50_PAD_EIM_OE__GPIO1_24				0x2bc 0x658 0x000 0x1 0x0
+#define MX50_PAD_EIM_OE__INT_BOOT				0x2bc 0x658 0x000 0x7 0x0
+#define MX50_PAD_EIM_RW__EIM_WEIM_RW				0x2c0 0x65c 0x000 0x0 0x0
+#define MX50_PAD_EIM_RW__GPIO1_25				0x2c0 0x65c 0x000 0x1 0x0
+#define MX50_PAD_EIM_RW__SYSTEM_RST				0x2c0 0x65c 0x000 0x7 0x0
+#define MX50_PAD_EIM_LBA__EIM_WEIM_LBA				0x2c4 0x660 0x000 0x0 0x0
+#define MX50_PAD_EIM_LBA__GPIO1_26				0x2c4 0x660 0x000 0x1 0x0
+#define MX50_PAD_EIM_LBA__TESTER_ACK				0x2c4 0x660 0x000 0x7 0x0
+#define MX50_PAD_EIM_CRE__EIM_WEIM_CRE				0x2c8 0x664 0x000 0x0 0x0
+#define MX50_PAD_EIM_CRE__GPIO1_27				0x2c8 0x664 0x000 0x1 0x0
+
+#endif /* __DTS_IMX50_PINFUNC_H */
diff --git a/src/arm/imx50.dtsi b/src/arm/imx50.dtsi
new file mode 100644
index 000000000000..620b0f030591
--- /dev/null
+++ b/src/arm/imx50.dtsi
@@ -0,0 +1,489 @@
+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx50-pinfunc.h"
+#include <dt-bindings/clock/imx5-clock.h>
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+	tzic: tz-interrupt-controller@0fffc000 {
+		compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x0fffc000 0x4000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			compatible = "fsl,imx-ckih2", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		aips@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			spba@50000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x50000000 0x40000>;
+				ranges;
+
+				esdhc1: esdhc@50004000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc2: esdhc@50008000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@5000c000 {
+					compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+					reg = <0x5000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
+					         <&clks IMX5_CLK_UART3_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi1: ecspi@50010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+					reg = <0x50010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
+					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@50014000 {
+					#sound-dai-cells = <0>;
+					compatible = "fsl,imx50-ssi",
+							"fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+					dmas = <&sdma 24 1 0>,
+					       <&sdma 25 1 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					status = "disabled";
+				};
+
+				esdhc3: esdhc@50020000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: esdhc@50024000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
+					         <&clks IMX5_CLK_DUMMY>,
+					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			usbotg: usb@53f80000 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+				status = "disabled";
+			};
+
+			usbh1: usb@53f80200 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+				status = "disabled";
+			};
+
+			usbh2: usb@53f80400 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				status = "disabled";
+			};
+
+			usbh3: usb@53f80600 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@53f84000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53f88000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@53f8c000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@53f90000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			wdog1: wdog@53f98000 {
+				compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks IMX5_CLK_DUMMY>;
+			};
+
+			gpt: timer@53fa0000 {
+				compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
+				reg = <0x53fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
+				         <&clks IMX5_CLK_GPT_HF_GATE>;
+				clock-names = "ipg", "per";
+			};
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@53fa8000 {
+				compatible = "fsl,imx50-iomuxc-gpr", "syscon";
+				reg = <0x53fa8000 0xc>;
+			};
+
+			pwm1: pwm@53fb4000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb4000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@53fb8000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb8000 0x4000>;
+				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
+				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@53fbc000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
+				         <&clks IMX5_CLK_UART1_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
+				         <&clks IMX5_CLK_UART2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: src@53fd0000 {
+				compatible = "fsl,imx50-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx50-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio5: gpio@53fdc000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fdc000 0x4000>;
+				interrupts = <103 104>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@53fe0000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <105 106>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c3: i2c@53fec000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x53fec000 0x4000>;
+				interrupts = <64>;
+				clocks = <&clks IMX5_CLK_I2C3_GATE>;
+				status = "disabled";
+			};
+
+			uart4: serial@53ff0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
+				         <&clks IMX5_CLK_UART4_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		aips@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			uart5: serial@63f90000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x63f90000 0x4000>;
+				interrupts = <86>;
+				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
+				         <&clks IMX5_CLK_UART5_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx50-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks IMX5_CLK_OWIRE_GATE>;
+				status = "disabled";
+			};
+
+			ecspi2: ecspi@63fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+				reg = <0x63fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
+				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: sdma@63fb0000 {
+				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks IMX5_CLK_SDMA_GATE>,
+				         <&clks IMX5_CLK_SDMA_GATE>;
+				clock-names = "ipg", "ahb";
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
+			};
+
+			cspi: cspi@63fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
+				reg = <0x63fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
+				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@63fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks IMX5_CLK_I2C2_GATE>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@63fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks IMX5_CLK_I2C1_GATE>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@63fcc000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx50-ssi", "fsl,imx51-ssi",
+							"fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+				dmas = <&sdma 28 0 0>,
+				       <&sdma 29 0 0>;
+				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
+				status = "disabled";
+			};
+
+			audmux: audmux@63fd0000 {
+				compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>,
+				         <&clks IMX5_CLK_FEC_GATE>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/imx51-apf51dev.dts b/src/arm/imx51-apf51dev.dts
index c5a9a24c280a..93d3ea12328c 100644
--- a/src/arm/imx51-apf51dev.dts
+++ b/src/arm/imx51-apf51dev.dts
@@ -16,6 +16,14 @@
 	model = "Armadeus Systems APF51Dev docking/development board";
 	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
 
+	backlight@bl1{
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		compatible = "gpio-backlight";
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
 	display@di1 {
 		compatible = "fsl,imx-parallel-display";
 		interface-pix-fmt = "bgr666";
@@ -114,6 +122,12 @@
 	pinctrl-0 = <&pinctrl_hog>;
 
 	imx51-apf51dev {
+		pinctrl_backlight: bl1grp {
+			fsl,pins = <
+				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
+			>;
+		};
+
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
 				MX51_PAD_EIM_EB2__GPIO2_22   0x0C5
diff --git a/src/arm/imx51-babbage.dts b/src/arm/imx51-babbage.dts
index 56569cecaa78..649befeb2cf9 100644
--- a/src/arm/imx51-babbage.dts
+++ b/src/arm/imx51-babbage.dts
@@ -127,24 +127,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		reg_usbh1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1reg>;
-			reg = <0>;
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		reg_usbotg_vbus: regulator@1 {
+		reg_hub_reset: regulator@0 {
 			compatible = "regulator-fixed";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usbotgreg>;
-			reg = <1>;
-			regulator-name = "usbotg_vbus";
+			reg = <0>;
+			regulator-name = "hub_reset";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
@@ -176,6 +164,7 @@
 			reg = <0>;
 			clocks = <&clks IMX5_CLK_DUMMY>;
 			clock-names = "main_clk";
+			reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
@@ -419,7 +408,7 @@
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_usbh1_vbus>;
+	vbus-supply = <&reg_hub_reset>;
 	fsl,usbphy = <&usbh1phy>;
 	phy_type = "ulpi";
 	status = "okay";
@@ -429,7 +418,6 @@
 	dr_mode = "otg";
 	disable-over-current;
 	phy_type = "utmi_wide";
-	vbus-supply = <&reg_usbotg_vbus>;
 	status = "okay";
 };
 
diff --git a/src/arm/imx51.dtsi b/src/arm/imx51.dtsi
index 17c05a6fa776..c0116cffc513 100644
--- a/src/arm/imx51.dtsi
+++ b/src/arm/imx51.dtsi
@@ -210,10 +210,13 @@
 				};
 
 				ssi2: ssi@70014000 {
+					#sound-dai-cells = <0>;
 					compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 					reg = <0x70014000 0x4000>;
 					interrupts = <30>;
-					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+					clock-names = "ipg", "baud";
 					dmas = <&sdma 24 1 0>,
 					       <&sdma 25 1 0>;
 					dma-names = "rx", "tx";
@@ -499,10 +502,13 @@
 			};
 
 			ssi1: ssi@83fcc000 {
+				#sound-dai-cells = <0>;
 				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 				reg = <0x83fcc000 0x4000>;
 				interrupts = <29>;
-				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+				clock-names = "ipg", "baud";
 				dmas = <&sdma 28 0 0>,
 				       <&sdma 29 0 0>;
 				dma-names = "rx", "tx";
@@ -554,10 +560,13 @@
 			};
 
 			ssi3: ssi@83fe8000 {
+				#sound-dai-cells = <0>;
 				compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
 				reg = <0x83fe8000 0x4000>;
 				interrupts = <96>;
-				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+				clock-names = "ipg", "baud";
 				dmas = <&sdma 46 0 0>,
 				       <&sdma 47 0 0>;
 				dma-names = "rx", "tx";
diff --git a/src/arm/imx53-qsrb.dts b/src/arm/imx53-qsrb.dts
index f1bbf9a32991..82d623d05915 100644
--- a/src/arm/imx53-qsrb.dts
+++ b/src/arm/imx53-qsrb.dts
@@ -28,6 +28,12 @@
 				MX53_PAD_CSI0_DAT9__I2C1_SCL      0x400001ec
 			>;
 		};
+
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1e4 /* IRQ */
+			>;
+		};
 	};
 };
 
@@ -38,6 +44,8 @@
 
 	pmic: mc34708@8 {
 		compatible = "fsl,mc34708";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <23 0x8>;
diff --git a/src/arm/imx53-smd.dts b/src/arm/imx53-smd.dts
index 5ec1590ff7bc..1d325576bcc0 100644
--- a/src/arm/imx53-smd.dts
+++ b/src/arm/imx53-smd.dts
@@ -265,7 +265,7 @@
 	};
 
 	pmic: dialog@48 {
-		compatible = "dialog,da9053", "dialog,da9052";
+		compatible = "dlg,da9053", "dlg,da9052";
 		reg = <0x48>;
 	};
 };
diff --git a/src/arm/imx53.dtsi b/src/arm/imx53.dtsi
index c6c58c1c00e3..ff4fa7ecacd8 100644
--- a/src/arm/imx53.dtsi
+++ b/src/arm/imx53.dtsi
@@ -46,10 +46,21 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a8";
 			reg = <0x0>;
+			clocks = <&clks IMX5_CLK_ARM>;
+			clock-latency = <61036>;
+			voltage-tolerance = <5>;
+			operating-points = <
+				/* kHz */
+				 166666  850000
+				 400000  900000
+				 800000 1050000
+				1000000 1200000
+				1200000 1300000
+			>;
 		};
 	};
 
@@ -221,12 +232,15 @@
 				};
 
 				ssi2: ssi@50014000 {
+					#sound-dai-cells = <0>;
 					compatible = "fsl,imx53-ssi",
 							"fsl,imx51-ssi",
 							"fsl,imx21-ssi";
 					reg = <0x50014000 0x4000>;
 					interrupts = <30>;
-					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+					clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+						 <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+					clock-names = "ipg", "baud";
 					dmas = <&sdma 24 1 0>,
 					       <&sdma 25 1 0>;
 					dma-names = "rx", "tx";
@@ -423,10 +437,14 @@
 				status = "disabled";
 
 				lvds-channel@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					reg = <0>;
 					status = "disabled";
 
-					port {
+					port@0 {
+						reg = <0>;
+
 						lvds0_in: endpoint {
 							remote-endpoint = <&ipu_di0_lvds0>;
 						};
@@ -434,10 +452,14 @@
 				};
 
 				lvds-channel@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
 					reg = <1>;
 					status = "disabled";
 
-					port {
+					port@1 {
+						reg = <1>;
+
 						lvds1_in: endpoint {
 							remote-endpoint = <&ipu_di1_lvds1>;
 						};
@@ -661,11 +683,14 @@
 			};
 
 			ssi1: ssi@63fcc000 {
+				#sound-dai-cells = <0>;
 				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
 						"fsl,imx21-ssi";
 				reg = <0x63fcc000 0x4000>;
 				interrupts = <29>;
-				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+				clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+				clock-names = "ipg", "baud";
 				dmas = <&sdma 28 0 0>,
 				       <&sdma 29 0 0>;
 				dma-names = "rx", "tx";
@@ -688,11 +713,14 @@
 			};
 
 			ssi3: ssi@63fe8000 {
+				#sound-dai-cells = <0>;
 				compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
 						"fsl,imx21-ssi";
 				reg = <0x63fe8000 0x4000>;
 				interrupts = <96>;
-				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
+				clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+					 <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+				clock-names = "ipg", "baud";
 				dmas = <&sdma 46 0 0>,
 				       <&sdma 47 0 0>;
 				dma-names = "rx", "tx";
@@ -728,7 +756,7 @@
 			};
 
 			vpu: vpu@63ff4000 {
-				compatible = "fsl,imx53-vpu";
+				compatible = "fsl,imx53-vpu", "cnm,coda7541";
 				reg = <0x63ff4000 0x1000>;
 				interrupts = <9>;
 				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
@@ -737,6 +765,15 @@
 				resets = <&src 1>;
 				iram = <&ocram>;
 			};
+
+			sahara: crypto@63ff8000 {
+				compatible = "fsl,imx53-sahara";
+				reg = <0x63ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+				         <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
 		};
 
 		ocram: sram@f8000000 {
@@ -744,5 +781,10 @@
 			reg = <0xf8000000 0x20000>;
 			clocks = <&clks IMX5_CLK_OCRAM>;
 		};
+
+		pmu {
+			compatible = "arm,cortex-a8-pmu";
+			interrupts = <77>;
+		};
 	};
 };
diff --git a/src/arm/imx6dl-gw552x.dts b/src/arm/imx6dl-gw552x.dts
new file mode 100644
index 000000000000..a4b700cef188
--- /dev/null
+++ b/src/arm/imx6dl-gw552x.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw552x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW552X";
+	compatible = "gw,imx6dl-gw552x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl-hummingboard.dts b/src/arm/imx6dl-hummingboard.dts
index c8e51dd41b8f..44a0e6736bb1 100644
--- a/src/arm/imx6dl-hummingboard.dts
+++ b/src/arm/imx6dl-hummingboard.dts
@@ -1,204 +1,13 @@
 /*
- * Copyright (C) 2013,2014 Russell King
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
  */
 /dts-v1/;
 
 #include "imx6dl.dtsi"
-#include "imx6qdl-microsom.dtsi"
-#include "imx6qdl-microsom-ar8035.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
 
 / {
-	model = "SolidRun HummingBoard DL/Solo";
-	compatible = "solidrun,hummingboard", "fsl,imx6dl";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio1 2 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_gpio1_2>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio1 0 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-
-		reg_usbotg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 22 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		/* IMX6 doesn't implement this yet */
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
-
-	/*
-	 * Not fitted on Carrier-1 board... yet
-	status = "okay";
-
-	rtc: pcf8523@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-	 */
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	hummingboard {
-		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
-				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
-			>;
-		};
-
-		pinctrl_hummingboard_gpio1_2: hummingboard-gpio1_2 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
-			>;
-		};
-
-		pinctrl_hummingboard_hdmi: hummingboard-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_hummingboard_spdif: hummingboard-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
-		};
-
-		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
-			/*
-			 * Similar to pinctrl_usbotg_2, but we want it
-			 * pulled down for a fixed host connection.
-			 */
-			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
-		};
-
-		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
-		};
-
-		pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-			>;
-		};
-
-		pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-	};
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-		&pinctrl_hummingboard_usdhc2_aux
-		&pinctrl_hummingboard_usdhc2
-	>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
-	status = "okay";
+	model = "SolidRun HummingBoard Solo/DualLite";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
 };
diff --git a/src/arm/imx6dl-udoo.dts b/src/arm/imx6dl-udoo.dts
new file mode 100644
index 000000000000..e3713f00e819
--- /dev/null
+++ b/src/arm/imx6dl-udoo.dts
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-udoo.dtsi"
+
+/ {
+	model = "Udoo i.MX6 Dual-lite Board";
+	compatible = "udoo,imx6dl-udoo", "fsl,imx6dl";
+};
diff --git a/src/arm/imx6dl.dtsi b/src/arm/imx6dl.dtsi
index b453e0e28aee..f94bf72832af 100644
--- a/src/arm/imx6dl.dtsi
+++ b/src/arm/imx6dl.dtsi
@@ -13,6 +13,10 @@
 #include "imx6qdl.dtsi"
 
 / {
+	aliases {
+		i2c3 = &i2c4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -24,7 +28,7 @@
 			next-level-cache = <&L2>;
 			operating-points = <
 				/* kHz    uV */
-				996000  1275000
+				996000  1250000
 				792000  1175000
 				396000  1075000
 			>;
@@ -114,3 +118,7 @@
 		      "di0_sel", "di1_sel",
 		      "di0", "di1";
 };
+
+&vpu {
+	compatible = "fsl,imx6dl-vpu", "cnm,coda960";
+};
diff --git a/src/arm/imx6q-gw5400-a.dts b/src/arm/imx6q-gw5400-a.dts
index 22e6f8e657d2..822ffb231c57 100644
--- a/src/arm/imx6q-gw5400-a.dts
+++ b/src/arm/imx6q-gw5400-a.dts
@@ -10,6 +10,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
@@ -18,7 +19,6 @@
 
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		ethernet0 = &fec;
 		ethernet1 = &eth1;
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
@@ -26,12 +26,10 @@
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
-		sky2 = &eth1;
 		ssi0 = &ssi1;
 		spi0 = &ecspi1;
 		usb0 = &usbh1;
 		usb1 = &usbotg;
-		usdhc2 = &usdhc3;
 	};
 
 	chosen {
@@ -40,23 +38,25 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		led0: user1 {
 			label = "user1";
-			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
 		led1: user2 {
 			label = "user2";
-			gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
 			default-state = "off";
 		};
 
 		led2: user3 {
 			label = "user3";
-			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
 			default-state = "off";
 		};
 	};
@@ -67,7 +67,9 @@
 
 	pps {
 		compatible = "pps-gpio";
-		gpios = <&gpio1 5 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 
@@ -109,7 +111,7 @@
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -137,7 +139,7 @@
 
 &ecspi1 {
 	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio3 19 0>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
@@ -153,7 +155,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 30 0>;
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -199,11 +201,6 @@
 		#gpio-cells = <2>;
 	};
 
-	hwmon: gsc@29 {
-		compatible = "gw,gsp";
-		reg = <0x29>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -314,16 +311,6 @@
 			};
 		};
 	};
-
-	pciswitch: pex8609@3f {
-		compatible = "plx,pex8609";
-		reg = <0x3f>;
-	};
-
-	pciclkgen: si52147@6b {
-		compatible = "sil,si52147";
-		reg = <0x6b>;
-	};
 };
 
 &i2c3 {
@@ -345,51 +332,73 @@
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	hdmiin: adv7611@4c {
-		compatible = "adi,adv7611";
-		reg = <0x4c>;
-	};
-
 	touchscreen: egalax_ts@04 {
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>; /* gpio7_12 active low */
-		wakeup-gpios = <&gpio7 12 0>;
+		interrupts = <12 2>;
+		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	};
+};
 
-	videoout: adv7393@2a {
-		compatible = "adi,adv7393";
-		reg = <0x2a>;
-	};
+&ldb {
+	status = "okay";
+};
+
+&pcie {
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
 
-	videoin: adv7180@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
+		compatible = "marvell,sky2";
 	};
 };
 
-&iomuxc {
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
 
+&iomuxc {
 	imx6q-gw5400-a {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05     0x80000000 /* GPS_PPS */
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10   0x80000000 /* user2 led */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
-				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
-				MX6QDL_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
-			 >;
-		};
 
 		pinctrl_audmux: audmuxgrp {
 			fsl,pins = <
@@ -397,6 +406,7 @@
 				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
 				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
 				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
 			>;
 		};
 
@@ -405,6 +415,7 @@
 				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
 				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
 				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0 /* SPINOR_CS0# */
 			>;
 		};
 
@@ -429,6 +440,14 @@
 			>;
 		};
 
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0 /* user1 led */
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0 /* user2 led */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* user3 led */
+			>;
+		};
+
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
@@ -450,6 +469,19 @@
 			>;
 		};
 
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
+			>;
+		};
+
+		pinctrl_pps: ppsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0 /* GPS_PPS */
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -474,6 +506,7 @@
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
 			>;
 		};
 
@@ -489,59 +522,3 @@
 		};
 	};
 };
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	reset-gpio = <&gpio1 29 0>;
-	status = "okay";
-
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/src/arm/imx6q-gw552x.dts b/src/arm/imx6q-gw552x.dts
new file mode 100644
index 000000000000..f87a8fa6e04d
--- /dev/null
+++ b/src/arm/imx6q-gw552x.dts
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw552x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW552X";
+	compatible = "gw,imx6q-gw552x", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/src/arm/imx6q-hummingboard.dts b/src/arm/imx6q-hummingboard.dts
new file mode 100644
index 000000000000..c2bf8476ce45
--- /dev/null
+++ b/src/arm/imx6q-hummingboard.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/src/arm/imx6q-tbs2910.dts b/src/arm/imx6q-tbs2910.dts
new file mode 100644
index 000000000000..a43abfa21e33
--- /dev/null
+++ b/src/arm/imx6q-tbs2910.dts
@@ -0,0 +1,432 @@
+/*
+ * Copyright 2014 Soeren Moch <smoch@web.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TBS2910 Matrix ARM mini PC";
+	compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	fan {
+		compatible = "gpio-fan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_fan>;
+		gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0    0
+				      3000 1>;
+	};
+
+	ir_recv {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ir>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		blue {
+			label = "blue_status_led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		reg_5p0v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "5P0V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	sound-sgtl5000 {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "On-board Codec";
+		mux-ext-port = <3>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "On-board SPDIF";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@0a {
+		clocks = <&clks 201>;
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc: ds1307@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5p0v>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6q-tbs2910 {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
+			>;
+		};
+
+		pinctrl_hdmi: hdmigrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
+			>;
+		};
+
+		pinctrl_ir: irgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
+			>;
+		};
+	};
+
+	gpio_fan {
+		pinctrl_gpio_fan: gpiofangrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
+			>;
+		};
+	};
+
+	gpio_leds {
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx6q-udoo.dts b/src/arm/imx6q-udoo.dts
index e3bff2ac00db..c3e64ff3d544 100644
--- a/src/arm/imx6q-udoo.dts
+++ b/src/arm/imx6q-udoo.dts
@@ -8,137 +8,15 @@
  * published by the Free Software Foundation.
  *
  */
-
 /dts-v1/;
 #include "imx6q.dtsi"
+#include "imx6qdl-udoo.dtsi"
 
 / {
 	model = "Udoo i.MX6 Quad Board";
 	compatible = "udoo,imx6q-udoo", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_h1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
-			gpio = <&gpio7 12 0>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx6q-udoo {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbh: usbhgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
-				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-	};
 };
 
 &sata {
 	status = "okay";
 };
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	clocks = <&clks 201>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
-	status = "okay";
-};
diff --git a/src/arm/imx6q.dtsi b/src/arm/imx6q.dtsi
index e9f3646d1760..93ec79bb6b35 100644
--- a/src/arm/imx6q.dtsi
+++ b/src/arm/imx6q.dtsi
@@ -31,7 +31,7 @@
 				1200000 1275000
 				996000  1250000
 				852000  1250000
-				792000  1150000
+				792000  1175000
 				396000  975000
 			>;
 			fsl,soc-operating-points = <
@@ -95,6 +95,8 @@
 					clocks = <&clks IMX6Q_CLK_ECSPI5>,
 						 <&clks IMX6Q_CLK_ECSPI5>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
@@ -308,3 +310,7 @@
 		};
 	};
 };
+
+&vpu {
+	compatible = "fsl,imx6q-vpu", "cnm,coda960";
+};
diff --git a/src/arm/imx6qdl-cubox-i.dtsi b/src/arm/imx6qdl-cubox-i.dtsi
index e8e781656b3f..6a524ca011e7 100644
--- a/src/arm/imx6qdl-cubox-i.dtsi
+++ b/src/arm/imx6qdl-cubox-i.dtsi
@@ -61,7 +61,7 @@
 
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
+		model = "Integrated SPDIF";
 		/* IMX6 doesn't implement this yet */
 		spdif-controller = <&spdif>;
 		spdif-out;
@@ -130,16 +130,23 @@
 			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
 		};
 
+		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
+			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
+		};
+
 		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
 			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
 		};
 
-		pinctrl_cubox_i_usbotg_id: cubox-i-usbotg-id {
+		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
 			/*
-			 * The Cubox-i pulls this low, but as it's pointless
+			 * The Cubox-i pulls ID low, but as it's pointless
 			 * leaving it as a pull-up, even if it is just 10uA.
 			 */
-			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+			>;
 		};
 
 		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
@@ -173,13 +180,15 @@
 };
 
 &usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
 	vbus-supply = <&reg_usbh1_vbus>;
 	status = "okay";
 };
 
 &usbotg {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbotg_id>;
+	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
 	vbus-supply = <&reg_usbotg_vbus>;
 	status = "okay";
 };
diff --git a/src/arm/imx6qdl-gw51xx.dtsi b/src/arm/imx6qdl-gw51xx.dtsi
index 0db15af41cb1..f2867c4b34a8 100644
--- a/src/arm/imx6qdl-gw51xx.dtsi
+++ b/src/arm/imx6qdl-gw51xx.dtsi
@@ -9,11 +9,11 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		can0 = &can1;
-		ethernet0 = &fec;
 		led0 = &led0;
 		led1 = &led1;
 		nand = &gpmi;
@@ -27,17 +27,19 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		led0: user1 {
 			label = "user1";
-			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
 		led1: user2 {
 			label = "user2";
-			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 	};
@@ -48,7 +50,9 @@
 
 	pps {
 		compatible = "pps-gpio";
-		gpios = <&gpio1 26 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 
@@ -81,7 +85,7 @@
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -91,7 +95,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 30 0>;
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -143,11 +147,6 @@
 		#gpio-cells = <2>;
 	};
 
-	hwmon: gsc@29 {
-		compatible = "gw,gsp";
-		reg = <0x29>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -159,53 +158,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
-
-	pmic: ltc3676@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-
-		regulators {
-			sw1_reg: ltc3676__sw1 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: ltc3676__sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: ltc3676__sw3 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: ltc3676__sw4 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ltc3676__ldo2 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ltc3676__ldo4 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-	};
 };
 
 &i2c3 {
@@ -213,31 +165,53 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
+};
 
-	videoin: adv7180@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
-	};
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
 };
 
-&iomuxc {
+&uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
 
-	imx6qdl-gw51xx {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
-				MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x80000000 /* PCIE_RST# */
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
-			 >;
-		};
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
 
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&iomuxc {
+	imx6qdl-gw51xx {
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
 				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
@@ -256,6 +230,14 @@
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
 			>;
 		};
 
@@ -301,6 +283,18 @@
 			>;
 		};
 
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_pps: ppsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
@@ -332,48 +326,8 @@
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
 			>;
 		};
 	};
 };
-
-&pcie {
-	reset-gpio = <&gpio1 0 0>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
diff --git a/src/arm/imx6qdl-gw52xx.dtsi b/src/arm/imx6qdl-gw52xx.dtsi
index 234e7b755232..b5756c21ea1d 100644
--- a/src/arm/imx6qdl-gw52xx.dtsi
+++ b/src/arm/imx6qdl-gw52xx.dtsi
@@ -9,10 +9,11 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		ethernet0 = &fec;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
@@ -20,7 +21,6 @@
 		ssi0 = &ssi1;
 		usb0 = &usbh1;
 		usb1 = &usbotg;
-		usdhc2 = &usdhc3;
 	};
 
 	chosen {
@@ -36,23 +36,25 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		led0: user1 {
 			label = "user1";
-			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
 		led1: user2 {
 			label = "user2";
-			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
 		led2: user3 {
 			label = "user3";
-			gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
 		};
 	};
@@ -63,7 +65,9 @@
 
 	pps {
 		compatible = "pps-gpio";
-		gpios = <&gpio1 26 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 
@@ -115,7 +119,7 @@
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -141,11 +145,17 @@
 	status = "okay";
 };
 
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 30 0>;
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -197,11 +207,6 @@
 		#gpio-cells = <2>;
 	};
 
-	hwmon: gsc@29 {
-		compatible = "gw,gsp";
-		reg = <0x29>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -213,65 +218,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
-
-	pciswitch: pex8609@3f {
-		compatible = "plx,pex8609";
-		reg = <0x3f>;
-	};
-
-	pmic: ltc3676@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-
-		regulators {
-			sw1_reg: ltc3676__sw1 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: ltc3676__sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: ltc3676__sw3 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: ltc3676__sw4 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ltc3676__ldo2 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ltc3676__ldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ltc3676__ldo4 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-	};
 };
 
 &i2c3 {
@@ -280,11 +226,6 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	accelerometer: fxos8700@1e {
-		compatible = "fsl,fxos8700";
-		reg = <0x13>;
-	};
-
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
@@ -297,49 +238,100 @@
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>; /* gpio7_12 active low */
-		wakeup-gpios = <&gpio7 12 0>;
+		interrupts = <12 2>;
+		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	};
+};
+
+&ldb {
+	status = "okay";
 
-	videoin: adv7180@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
 	};
 };
 
-&iomuxc {
+&pcie {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
 
-	imx6qdl-gw52xx {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x80000000 /* MEZZ_DIO0 */
-				MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x80000000 /* MEZZ_DIO1 */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x80000000 /* OTG_PWR_EN */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31   0x80000000 /* VIDDEC_PDN# */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1     0x000130b0 /* AUD4_MCK */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x80000000 /* USB_SEL_PCI */
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12   0x80000000 /* TOUCH_IRQ# */
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x80000000 /* user1 led */
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x80000000 /* user2 led */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x80000000 /* user3 led */
-				MX6QDL_PAD_SD2_CMD__GPIO1_IO11   0x80000000 /* LVDS_TCH# */
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00  0x80000000 /* SD3_CD# */
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11  0x80000000 /* UART2_EN# */
-			 >;
-		};
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
 
+&iomuxc {
+	imx6qdl-gw52xx {
 		pinctrl_audmux: audmuxgrp {
 			fsl,pins = <
 				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
 				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
 				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
 				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0 /* AUD4_MCK */
 			>;
 		};
 
@@ -361,6 +353,23 @@
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
 			>;
 		};
 
@@ -406,6 +415,18 @@
 			>;
 		};
 
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE_RST# */
+			>;
+		};
+
+		pinctrl_pps: ppsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+			>;
+		};
+
 		pinctrl_pwm4: pwm4grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
@@ -436,6 +457,7 @@
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0 /* OTG_PWR_EN */
 			>;
 		};
 
@@ -447,85 +469,8 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x1b0b0 /* CD */
 			>;
 		};
 	};
 };
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&gpio1 29 0>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/src/arm/imx6qdl-gw53xx.dtsi b/src/arm/imx6qdl-gw53xx.dtsi
index 143f84f7812c..86f03c1b147c 100644
--- a/src/arm/imx6qdl-gw53xx.dtsi
+++ b/src/arm/imx6qdl-gw53xx.dtsi
@@ -9,21 +9,19 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		can0 = &can1;
-		ethernet0 = &fec;
 		ethernet1 = &eth1;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
 		nand = &gpmi;
-		sky2 = &eth1;
 		ssi0 = &ssi1;
 		usb0 = &usbh1;
 		usb1 = &usbotg;
-		usdhc2 = &usdhc3;
 	};
 
 	chosen {
@@ -39,23 +37,25 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		led0: user1 {
 			label = "user1";
-			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
 		led1: user2 {
 			label = "user2";
-			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
 		led2: user3 {
 			label = "user3";
-			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
 		};
 	};
@@ -66,7 +66,9 @@
 
 	pps {
 		compatible = "pps-gpio";
-		gpios = <&gpio1 26 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 
@@ -118,7 +120,7 @@
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -154,7 +156,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 30 0>;
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -206,11 +208,6 @@
 		#gpio-cells = <2>;
 	};
 
-	hwmon: gsc@29 {
-		compatible = "gw,gsp";
-		reg = <0x29>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -222,77 +219,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
-
-	pciclkgen: si53156@6b {
-		compatible = "sil,si53156";
-		reg = <0x6b>;
-	};
-
-	pciswitch: pex8606@3f {
-		compatible = "plx,pex8606";
-		reg = <0x3f>;
-	};
-
-	pmic: ltc3676@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-
-		regulators {
-			/* VDD_SOC */
-			sw1_reg: ltc3676__sw1 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 */
-			sw2_reg: ltc3676__sw2 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM */
-			sw3_reg: ltc3676__sw3 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR */
-			sw4_reg: ltc3676__sw4 {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 */
-			ldo2_reg: ltc3676__ldo2 {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 */
-			ldo3_reg: ltc3676__ldo3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_HIGH */
-			ldo4_reg: ltc3676__ldo4 {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-		};
-	};
 };
 
 &i2c3 {
@@ -301,11 +227,6 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	accelerometer: fxos8700@1e {
-		compatible = "fsl,fxos8700";
-		reg = <0x1e>;
-	};
-
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
@@ -314,65 +235,109 @@
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	hdmiin: adv7611@4c {
-		compatible = "adi,adv7611";
-		reg = <0x4c>;
-	};
-
 	touchscreen: egalax_ts@04 {
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <11 2>; /* gpio1_11 active low */
-		wakeup-gpios = <&gpio1 11 0>;
+		interrupts = <11 2>;
+		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 	};
+};
 
-	videoout: adv7393@2a {
-		compatible = "adi,adv7393";
-		reg = <0x2a>;
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
 	};
+};
 
-	videoin: adv7180@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
+		compatible = "marvell,sky2";
 	};
 };
 
-&iomuxc {
+&pwm4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
 
-	imx6qdl-gw53xx {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A19__GPIO2_IO19    0x80000000 /* PCIE6EXP_DIO0 */
-				MX6QDL_PAD_EIM_A20__GPIO2_IO18    0x80000000 /* PCIE6EXP_DIO1 */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27  0x80000000 /* GPS_SHDN */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26  0x80000000 /* GPS_PPS */
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02     0x80000000 /* CAN_STBY */
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08     0x80000000 /* PMIC_IRQ# */
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09     0x80000000 /* HUB_RST# */
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* PCIE_WDIS# */
-				MX6QDL_PAD_GPIO_19__GPIO4_IO05    0x80000000 /* ACCEL_IRQ# */
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14   0x80000000 /* USBOTG_OC# */
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x80000000 /* user2 led */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
-				MX6QDL_PAD_SD2_CMD__GPIO1_IO11    0x80000000 /* TOUCH_IRQ# */
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00   0x80000000 /* SD3_DET# */
-			 >;
-		};
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
 
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6qdl-gw53xx {
 		pinctrl_audmux: audmuxgrp {
 			fsl,pins = <
 				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
 				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
 				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
 				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
 			>;
 		};
 
@@ -399,8 +364,17 @@
 
 		pinctrl_flexcan1: flexcan1grp {
 			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x80000000
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x80000000
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
 			>;
 		};
 
@@ -446,6 +420,19 @@
 			>;
 		};
 
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
+			>;
+		};
+
+		pinctrl_pps: ppsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+			>;
+		};
+
 		pinctrl_pwm4: pwm4grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
@@ -476,6 +463,8 @@
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
 			>;
 		};
 
@@ -487,90 +476,8 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* CD */
 			>;
 		};
 	};
 };
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&gpio1 29 0>;
-	status = "okay";
-
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-	};
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/src/arm/imx6qdl-gw54xx.dtsi b/src/arm/imx6qdl-gw54xx.dtsi
index 16e7ad3d98ad..4a8d97f47759 100644
--- a/src/arm/imx6qdl-gw54xx.dtsi
+++ b/src/arm/imx6qdl-gw54xx.dtsi
@@ -9,21 +9,19 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		can0 = &can1;
-		ethernet0 = &fec;
 		ethernet1 = &eth1;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
 		nand = &gpmi;
-		sky2 = &eth1;
 		ssi0 = &ssi1;
 		usb0 = &usbh1;
 		usb1 = &usbotg;
-		usdhc2 = &usdhc3;
 	};
 
 	chosen {
@@ -39,23 +37,25 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 
 		led0: user1 {
 			label = "user1";
-			gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
 		led1: user2 {
 			label = "user2";
-			gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
 		led2: user3 {
 			label = "user3";
-			gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
 		};
 	};
@@ -66,7 +66,9 @@
 
 	pps {
 		compatible = "pps-gpio";
-		gpios = <&gpio1 26 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 		status = "okay";
 	};
 
@@ -108,7 +110,7 @@
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 	};
@@ -144,7 +146,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 30 0>;
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -196,11 +198,6 @@
 		#gpio-cells = <2>;
 	};
 
-	hwmon: gsc@29 {
-		compatible = "gw,gsp";
-		reg = <0x29>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -311,16 +308,6 @@
 			};
 		};
 	};
-
-	pciswitch: pex8609@3f {
-		compatible = "plx,pex8609";
-		reg = <0x3f>;
-	};
-
-	pciclkgen: si52147@6b {
-		compatible = "sil,si52147";
-		reg = <0x6b>;
-	};
 };
 
 &i2c3 {
@@ -329,11 +316,6 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	accelerometer: fxos8700@1e {
-		compatible = "fsl,fxos8700";
-		reg = <0x1e>;
-	};
-
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
@@ -342,59 +324,113 @@
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	hdmiin: adv7611@4c {
-		compatible = "adi,adv7611";
-		reg = <0x4c>;
-	};
-
 	touchscreen: egalax_ts@04 {
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>; /* gpio7_12 active low */
-		wakeup-gpios = <&gpio7 12 0>;
+		interrupts = <12 2>;
+		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	};
+};
 
-	videoout: adv7393@2a {
-		compatible = "adi,adv7393";
-		reg = <0x2a>;
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
 	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
 
-	videoin: adv7180@20 {
-		compatible = "adi,adv7180";
-		reg = <0x20>;
+	eth1: sky2@8 { /* MAC/PHY on bus 8 */
+		compatible = "marvell,sky2";
 	};
 };
 
-&iomuxc {
+&pwm4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
 
-	imx6qdl-gw54xx {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x80000000 /* OTG_PWR_EN */
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19    0x80000000 /* SPINOR_CS0# */
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26  0x80000000 /* GPS_PPS */
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x80000000 /* PCIE RST */
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02     0x80000000 /* CAN_STBY */
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x80000000 /* TOUCH_IRQ# */
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x80000000 /* user1 led */
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x80000000 /* user2 led */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x80000000 /* user3 led */
-				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16   0x80000000 /* USBHUB_RST# */
-				MX6QDL_PAD_SD1_DAT3__GPIO1_IO21   0x80000000 /* MIPI_DIO */
-			 >;
-		};
+&ssi1 {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
 
+&iomuxc {
+	imx6qdl-gw54xx {
 		pinctrl_audmux: audmuxgrp {
 			fsl,pins = <
 				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
 				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
 				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
 				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
 			>;
 		};
 
@@ -421,8 +457,17 @@
 
 		pinctrl_flexcan1: flexcan1grp {
 			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x80000000
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x80000000
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
 			>;
 		};
 
@@ -468,6 +513,19 @@
 			>;
 		};
 
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
+			>;
+		};
+
+		pinctrl_pps: ppsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+			>;
+		};
+
 		pinctrl_pwm4: pwm4grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
@@ -498,6 +556,7 @@
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
 			>;
 		};
 
@@ -513,90 +572,3 @@
 		};
 	};
 };
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	reset-gpio = <&gpio1 29 0>;
-	status = "okay";
-
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-	};
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/src/arm/imx6qdl-gw552x.dtsi b/src/arm/imx6qdl-gw552x.dtsi
new file mode 100644
index 000000000000..5c6587f6c420
--- /dev/null
+++ b/src/arm/imx6qdl-gw552x.dtsi
@@ -0,0 +1,267 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P0V";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_5p0v: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "5P0V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay"; };
+
+&usbh1 {
+	status = "okay";
+};
+
+&iomuxc {
+	imx6qdl-gw552x {
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+                };
+	};
+};
diff --git a/src/arm/imx6qdl-hummingboard.dtsi b/src/arm/imx6qdl-hummingboard.dtsi
new file mode 100644
index 000000000000..62841e85a91e
--- /dev/null
+++ b/src/arm/imx6qdl-hummingboard.dtsi
@@ -0,0 +1,200 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ */
+#include "imx6qdl-microsom.dtsi"
+#include "imx6qdl-microsom-ar8035.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio3 5 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: usb-h1-vbus {
+			compatible = "regulator-fixed";
+			enable-active-high;
+			gpio = <&gpio1 0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		reg_usbotg_vbus: usb-otg-vbus {
+			compatible = "regulator-fixed";
+			enable-active-high;
+			gpio = <&gpio3 22 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "On-board SPDIF";
+		/* IMX6 doesn't implement this yet */
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_flexcan1>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
+
+	/*
+	 * Not fitted on Carrier-1 board... yet
+	status = "okay";
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+	 */
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	hummingboard {
+		pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000
+				MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000
+			>;
+		};
+
+		pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard_hdmi: hummingboard-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard_spdif: hummingboard-spdif {
+			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
+		};
+
+		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
+			/*
+			 * Similar to pinctrl_usbotg_2, but we want it
+			 * pulled down for a fixed host connection.
+			 */
+			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+		};
+
+		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+			>;
+		};
+
+		pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+			>;
+		};
+	};
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_hummingboard_usdhc2_aux
+		&pinctrl_hummingboard_usdhc2
+	>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 4 0>;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-microsom-ar8035.dtsi b/src/arm/imx6qdl-microsom-ar8035.dtsi
new file mode 100644
index 000000000000..db9f45b2c573
--- /dev/null
+++ b/src/arm/imx6qdl-microsom-ar8035.dtsi
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This describes the hookup for an AR8035 to the iMX6 on the SolidRun
+ * MicroSOM.
+ */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
+	phy-mode = "rgmii";
+	phy-reset-duration = <2>;
+	phy-reset-gpios = <&gpio4 15 0>;
+	status = "okay";
+};
+
+&iomuxc {
+	enet {
+		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				/* AR8035 reset */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
+				/* AR8035 interrupt */
+				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x80000000
+				/* GPIO16 -> AR8035 25MHz */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0xc0000000
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x80000000
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+				/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+				/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+				/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				/* AR8035 pin strapping: MODE#0: pull down */
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+
+				/*
+				 * As the RMII pins are also connected to RGMII
+				 * so that an AR8030 can be placed, set these
+				 * to high-z with the same pulls as above.
+				 * Use the GPIO settings to avoid changing the
+				 * input select registers.
+				 */
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx6qdl-microsom.dtsi b/src/arm/imx6qdl-microsom.dtsi
new file mode 100644
index 000000000000..79eac6849d4c
--- /dev/null
+++ b/src/arm/imx6qdl-microsom.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ */
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_uart1: microsom-uart1 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart1>;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-nitrogen6x.dtsi b/src/arm/imx6qdl-nitrogen6x.dtsi
index 42ff525ebe13..08218120e770 100644
--- a/src/arm/imx6qdl-nitrogen6x.dtsi
+++ b/src/arm/imx6qdl-nitrogen6x.dtsi
@@ -174,6 +174,11 @@
 	status = "okay";
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -187,6 +192,25 @@
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
+
+	rtc: rtc@6f {
+		compatible = "isil,isl1208";
+		reg = <0x6f>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
 };
 
 &iomuxc {
@@ -266,6 +290,20 @@
 			>;
 		};
 
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
diff --git a/src/arm/imx6qdl-phytec-pbab01.dtsi b/src/arm/imx6qdl-phytec-pbab01.dtsi
new file mode 100644
index 000000000000..585b4f6986c1
--- /dev/null
+++ b/src/arm/imx6qdl-phytec-pbab01.dtsi
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	chosen {
+		linux,stdout-path = &uart4;
+	};
+
+	regulators {
+		sound_1v8: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "i2s-audio-1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		sound_3v3: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "i2s-audio-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+	tlv320_mclk: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+		clock-output-names = "tlv320-mclk";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "OnboardTLV320AIC3007";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"Speaker", "SPOP",
+			"Speaker", "SPOM",
+			"Headphone Jack", "HPLOUT",
+			"Headphone Jack", "HPROUT",
+			"MIC3L", "Mic Jack",
+			"MIC3R", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE1L", "Line In",
+			"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&tlv320_mclk>;
+		};
+	};
+
+};
+
+&audmux {
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			0x00000000
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	codec: tlv320@18 {
+		compatible = "ti,tlv320aic3007";
+		#sound-dai-cells = <0>;
+		reg = <0x18>;
+		ai3x-micbias-vg = <2>;
+
+		AVDD-supply = <&sound_3v3>;
+		IOVDD-supply = <&sound_3v3>;
+		DRVDD-supply = <&sound_3v3>;
+		DVDD-supply = <&sound_1v8>;
+	};
+
+	stmpe@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,rtc8564";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl-phytec-pfla02.dtsi b/src/arm/imx6qdl-phytec-pfla02.dtsi
index 2694aa84e187..19cc269a08d4 100644
--- a/src/arm/imx6qdl-phytec-pfla02.dtsi
+++ b/src/arm/imx6qdl-phytec-pfla02.dtsi
@@ -58,6 +58,18 @@
 	};
 };
 
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "disabled";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
 &ecspi3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;
@@ -72,6 +84,22 @@
 	};
 };
 
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vdd_eth_io_reg>;
+	status = "disabled";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c1>;
@@ -83,10 +111,10 @@
 	};
 
 	pmic@58 {
-		compatible = "dialog,da9063";
+		compatible = "dlg,da9063";
 		reg = <0x58>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <17 0x8>; /* active-low GPIO4_17 */
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 0x8>; /* active-low GPIO2_9 */
 
 		regulators {
 			vddcore_reg: bcore1 {
@@ -162,6 +190,18 @@
 	};
 };
 
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -171,7 +211,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
 				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-				MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000 /* PMIC interrupt */
+				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09  0x80000000 /* PMIC interrupt */
 				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
 				MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
 			>;
@@ -206,6 +246,13 @@
 			>;
 		};
 
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			>;
+		};
+
 		pinctrl_gpmi_nand: gpminandgrp {
 			fsl,pins = <
 				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
@@ -235,6 +282,24 @@
 			>;
 		};
 
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
+		};
+
 		pinctrl_uart3: uart3grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
@@ -293,22 +358,22 @@
 				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
 			>;
 		};
-	};
-};
 
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	phy-supply = <&vdd_eth_io_reg>;
-	status = "disabled";
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT16__AUD5_TXC	0x130b0
+				MX6QDL_PAD_DISP0_DAT17__AUD5_TXD	0x110b0
+				MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS	0x130b0
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+			>;
+		};
+	};
 };
 
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
+&pcie {
+	pinctrl-name = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 17 0>;
 	status = "disabled";
 };
 
diff --git a/src/arm/imx6qdl-rex.dtsi b/src/arm/imx6qdl-rex.dtsi
index df7bcf86c156..488a640796ac 100644
--- a/src/arm/imx6qdl-rex.dtsi
+++ b/src/arm/imx6qdl-rex.dtsi
@@ -308,7 +308,6 @@
 };
 
 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };
 
diff --git a/src/arm/imx6qdl-sabrelite.dtsi b/src/arm/imx6qdl-sabrelite.dtsi
index 0a36129152e0..0b28a9d5241e 100644
--- a/src/arm/imx6qdl-sabrelite.dtsi
+++ b/src/arm/imx6qdl-sabrelite.dtsi
@@ -173,6 +173,11 @@
 	status = "okay";
 };
 
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -188,6 +193,20 @@
 	};
 };
 
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hog>;
@@ -265,6 +284,20 @@
 			>;
 		};
 
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
diff --git a/src/arm/imx6qdl-sabresd.dtsi b/src/arm/imx6qdl-sabresd.dtsi
index ec43dde78525..f1cd2147421d 100644
--- a/src/arm/imx6qdl-sabresd.dtsi
+++ b/src/arm/imx6qdl-sabresd.dtsi
@@ -54,6 +54,19 @@
 			gpio = <&gpio4 10 0>;
 			enable-active-high;
 		};
+
+		reg_pcie: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pcie_reg>;
+			regulator-name = "MPCIE_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 19 0>;
+			regulator-always-on;
+			enable-active-high;
+		};
 	};
 
 	gpio-keys {
@@ -94,10 +107,8 @@
 			"Headphone Jack", "HPOUTR",
 			"Ext Spk", "SPKOUTL",
 			"Ext Spk", "SPKOUTR",
-			"MICBIAS", "AMIC",
-			"IN3R", "MICBIAS",
-			"DMIC", "MICBIAS",
-			"DMICDAT", "DMIC";
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
 	};
@@ -166,7 +177,7 @@
 	codec: wm8962@1a {
 		compatible = "wlf,wm8962";
 		reg = <0x1a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		DCVDD-supply = <&reg_audio>;
 		DBVDD-supply = <&reg_audio>;
 		AVDD-supply = <&reg_audio>;
@@ -314,15 +325,15 @@
 	imx6qdl-sabresd {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
-				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
 			>;
 		};
 
@@ -367,9 +378,9 @@
 
 		pinctrl_gpio_keys: gpio_keysgrp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x80000000
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x80000000
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
+				MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
 			>;
 		};
 
@@ -396,7 +407,13 @@
 
 		pinctrl_pcie: pciegrp {
 			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x80000000
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie_reg: pciereggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b0b0
 			>;
 		};
 
@@ -468,7 +485,7 @@
 	gpio_leds {
 		pinctrl_gpio_leds: gpioledsgrp {
 			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
 			>;
 		};
 	};
@@ -512,6 +529,10 @@
 	status = "okay";
 };
 
+&snvs_poweroff {
+	status = "okay";
+};
+
 &ssi2 {
 	status = "okay";
 };
diff --git a/src/arm/imx6qdl-udoo.dtsi b/src/arm/imx6qdl-udoo.dtsi
new file mode 100644
index 000000000000..1211da894ee9
--- /dev/null
+++ b/src/arm/imx6qdl-udoo.dtsi
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_h1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
+			gpio = <&gpio7 12 0>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6q-udoo {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbh: usbhgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
+				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	clocks = <&clks 201>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	status = "okay";
+};
diff --git a/src/arm/imx6qdl.dtsi b/src/arm/imx6qdl.dtsi
index c701af958006..d6c69ec44314 100644
--- a/src/arm/imx6qdl.dtsi
+++ b/src/arm/imx6qdl.dtsi
@@ -137,7 +137,9 @@
 
 		pcie: pcie@0x01000000 {
 			compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
-			reg = <0x01ffc000 0x4000>; /* DBI */
+			reg = <0x01ffc000 0x04000>,
+			      <0x01f00000 0x80000>;
+			reg-names = "dbi", "config";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -273,11 +275,14 @@
 				};
 
 				ssi1: ssi@02028000 {
+					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6q-ssi",
 							"fsl,imx51-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_SSI1_IPG>;
+					clocks = <&clks IMX6QDL_CLK_SSI1_IPG>,
+						 <&clks IMX6QDL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
 					dmas = <&sdma 37 1 0>,
 					       <&sdma 38 1 0>;
 					dma-names = "rx", "tx";
@@ -286,11 +291,14 @@
 				};
 
 				ssi2: ssi@0202c000 {
+					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6q-ssi",
 							"fsl,imx51-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_SSI2_IPG>;
+					clocks = <&clks IMX6QDL_CLK_SSI2_IPG>,
+						 <&clks IMX6QDL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
 					dmas = <&sdma 41 1 0>,
 					       <&sdma 42 1 0>;
 					dma-names = "rx", "tx";
@@ -299,11 +307,14 @@
 				};
 
 				ssi3: ssi@02030000 {
+					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6q-ssi",
 							"fsl,imx51-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6QDL_CLK_SSI3_IPG>;
+					clocks = <&clks IMX6QDL_CLK_SSI3_IPG>,
+						 <&clks IMX6QDL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
 					dmas = <&sdma 45 1 0>,
 					       <&sdma 46 1 0>;
 					dma-names = "rx", "tx";
@@ -322,9 +333,16 @@
 			};
 
 			vpu: vpu@02040000 {
+				compatible = "cnm,coda960";
 				reg = <0x02040000 0x3c000>;
-				interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
-				             <0 12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "bit", "jpeg";
+				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
+					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&ocram>;
 			};
 
 			aipstz@0207c000 { /* AIPSTZ1 */
@@ -396,8 +414,9 @@
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_GPT_IPG>,
-					 <&clks IMX6QDL_CLK_GPT_IPG_PER>;
-				clock-names = "ipg", "per";
+					 <&clks IMX6QDL_CLK_GPT_IPG_PER>,
+					 <&clks IMX6QDL_CLK_GPT_3M>;
+				clock-names = "ipg", "per", "osc_per";
 			};
 
 			gpio1: gpio@0209c000 {
@@ -645,6 +664,12 @@
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
+
+				snvs_poweroff: snvs-poweroff@38 {
+					compatible = "fsl,sec-v4.0-poweroff";
+					reg = <0x38 0x4>;
+					status = "disabled";
+				};
 			};
 
 			epit1: epit@020d0000 { /* EPIT1 */
diff --git a/src/arm/imx6sl-evk.dts b/src/arm/imx6sl-evk.dts
index 3f9e041c0252..fda4932faefd 100644
--- a/src/arm/imx6sl-evk.dts
+++ b/src/arm/imx6sl-evk.dts
@@ -20,6 +20,13 @@
 		reg = <0x80000000 0x40000000>;
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -74,6 +81,14 @@
 			regulator-max-microvolt = <4325000>;
 			regulator-boot-on;
 		};
+
+		reg_lcd_3v3: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "lcd-3v3";
+			gpio = <&gpio4 3 0>;
+			enable-active-high;
+		};
 	};
 
 	sound {
@@ -329,12 +344,6 @@
 			>;
 		};
 
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
-			>;
-		};
-
 		pinctrl_kpp: kppgrp {
 			fsl,pins = <
 				MX6SL_PAD_KEY_ROW0__KEY_ROW0    0x1b010
@@ -346,6 +355,51 @@
 			>;
 		};
 
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX6SL_PAD_LCD_DAT0__LCD_DATA00 0x1b0b0
+				MX6SL_PAD_LCD_DAT1__LCD_DATA01 0x1b0b0
+				MX6SL_PAD_LCD_DAT2__LCD_DATA02 0x1b0b0
+				MX6SL_PAD_LCD_DAT3__LCD_DATA03 0x1b0b0
+				MX6SL_PAD_LCD_DAT4__LCD_DATA04 0x1b0b0
+				MX6SL_PAD_LCD_DAT5__LCD_DATA05 0x1b0b0
+				MX6SL_PAD_LCD_DAT6__LCD_DATA06 0x1b0b0
+				MX6SL_PAD_LCD_DAT7__LCD_DATA07 0x1b0b0
+				MX6SL_PAD_LCD_DAT8__LCD_DATA08 0x1b0b0
+				MX6SL_PAD_LCD_DAT9__LCD_DATA09 0x1b0b0
+				MX6SL_PAD_LCD_DAT10__LCD_DATA10 0x1b0b0
+				MX6SL_PAD_LCD_DAT11__LCD_DATA11 0x1b0b0
+				MX6SL_PAD_LCD_DAT12__LCD_DATA12 0x1b0b0
+				MX6SL_PAD_LCD_DAT13__LCD_DATA13 0x1b0b0
+				MX6SL_PAD_LCD_DAT14__LCD_DATA14 0x1b0b0
+				MX6SL_PAD_LCD_DAT15__LCD_DATA15 0x1b0b0
+				MX6SL_PAD_LCD_DAT16__LCD_DATA16 0x1b0b0
+				MX6SL_PAD_LCD_DAT17__LCD_DATA17 0x1b0b0
+				MX6SL_PAD_LCD_DAT18__LCD_DATA18 0x1b0b0
+				MX6SL_PAD_LCD_DAT19__LCD_DATA19 0x1b0b0
+				MX6SL_PAD_LCD_DAT20__LCD_DATA20 0x1b0b0
+				MX6SL_PAD_LCD_DAT21__LCD_DATA21 0x1b0b0
+				MX6SL_PAD_LCD_DAT22__LCD_DATA22 0x1b0b0
+				MX6SL_PAD_LCD_DAT23__LCD_DATA23 0x1b0b0
+				MX6SL_PAD_LCD_CLK__LCD_CLK 0x1b0b0
+				MX6SL_PAD_LCD_ENABLE__LCD_ENABLE 0x1b0b0
+				MX6SL_PAD_LCD_HSYNC__LCD_HSYNC 0x1b0b0
+				MX6SL_PAD_LCD_VSYNC__LCD_VSYNC 0x1b0b0
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX6SL_PAD_HSIC_STROBE__GPIO3_IO20 0x17059
+			>;
+		};
+
+		pinctrl_pwm1: pwmgrp {
+			fsl,pins = <
+				MX6SL_PAD_PWM1__PWM1_OUT 0x110b0
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
@@ -488,6 +542,48 @@
 	status = "okay";
 };
 
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	lcd-supply = <&reg_lcd_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <89>;
+				hfront-porch = <164>;
+				vback-porch = <23>;
+				vfront-porch = <10>;
+				hsync-len = <10>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
 &ssi2 {
 	status = "okay";
 };
diff --git a/src/arm/imx6sl.dtsi b/src/arm/imx6sl.dtsi
index c75800ca8b35..36ab8e054cee 100644
--- a/src/arm/imx6sl.dtsi
+++ b/src/arm/imx6sl.dtsi
@@ -226,11 +226,14 @@
 				};
 
 				ssi1: ssi@02028000 {
+					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6sl-ssi",
 							"fsl,imx51-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_SSI1>;
+					clocks = <&clks IMX6SL_CLK_SSI1_IPG>,
+						 <&clks IMX6SL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
 					dmas = <&sdma 37 1 0>,
 					       <&sdma 38 1 0>;
 					dma-names = "rx", "tx";
@@ -239,11 +242,14 @@
 				};
 
 				ssi2: ssi@0202c000 {
+					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6sl-ssi",
 							"fsl,imx51-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_SSI2>;
+					clocks = <&clks IMX6SL_CLK_SSI2_IPG>,
+						 <&clks IMX6SL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
 					dmas = <&sdma 41 1 0>,
 					       <&sdma 42 1 0>;
 					dma-names = "rx", "tx";
@@ -252,11 +258,14 @@
 				};
 
 				ssi3: ssi@02030000 {
+					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6sl-ssi",
 							"fsl,imx51-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SL_CLK_SSI3>;
+					clocks = <&clks IMX6SL_CLK_SSI3_IPG>,
+						 <&clks IMX6SL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
 					dmas = <&sdma 45 1 0>,
 					       <&sdma 46 1 0>;
 					dma-names = "rx", "tx";
@@ -529,6 +538,14 @@
 				};
 			};
 
+			tempmon: tempmon {
+				compatible = "fsl,imx6q-tempmon";
+				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+				fsl,tempmon = <&anatop>;
+				fsl,tempmon-data = <&ocotp>;
+				clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+			};
+
 			usbphy1: usbphy@020c9000 {
 				compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
@@ -557,6 +574,12 @@
 					interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <0 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
+
+				snvs_poweroff: snvs-poweroff@38 {
+					compatible = "fsl,sec-v4.0-poweroff";
+					reg = <0x38 0x4>;
+					status = "disabled";
+				};
 			};
 
 			epit1: epit@020d0000 {
@@ -627,8 +650,14 @@
 			};
 
 			lcdif: lcdif@020f8000 {
+				compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif";
 				reg = <0x020f8000 0x4000>;
 				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SL_CLK_LCDIF_AXI>,
+					 <&clks IMX6SL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
 			};
 
 			dcp: dcp@020fc000 {
@@ -784,7 +813,7 @@
 			};
 
 			ocotp: ocotp@021bc000 {
-				compatible = "fsl,imx6sl-ocotp";
+				compatible = "fsl,imx6sl-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 			};
 
diff --git a/src/arm/imx6sx-pinfunc.h b/src/arm/imx6sx-pinfunc.h
new file mode 100644
index 000000000000..bb9c6b78cb97
--- /dev/null
+++ b/src/arm/imx6sx-pinfunc.h
@@ -0,0 +1,1544 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX6SX_PINFUNC_H
+#define __DTS_IMX6SX_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SX_PAD_GPIO1_IO00__I2C1_SCL                            0x0014 0x035C 0x07A8 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT                      0x0014 0x035C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK                          0x0014 0x035C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO00__CCM_WAIT                            0x0014 0x035C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY                      0x0014 0x035C 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0                          0x0014 0x035C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5               0x0014 0x035C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1                           0x0014 0x035C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO01__I2C1_SDA                            0x0018 0x0360 0x07AC 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B                      0x0018 0x0360 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO01__SPDIF_SR_CLK                        0x0018 0x0360 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO01__CCM_STOP                            0x0018 0x0360 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO01__WDOG3_WDOG_B                        0x0018 0x0360 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1                          0x0018 0x0360 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL           0x0018 0x0360 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO01__PHY_DTB_0                           0x0018 0x0360 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO02__I2C2_SCL                            0x001C 0x0364 0x07B0 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO02__USDHC1_CD_B                         0x001C 0x0364 0x0864 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO02__CSI2_MCLK                           0x001C 0x0364 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK                     0x001C 0x0364 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO02__WDOG1_WDOG_B                        0x001C 0x0364 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2                          0x001C 0x0364 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO02__CCM_REF_EN_B                        0x001C 0x0364 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO02__PHY_TDI                             0x001C 0x0364 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO03__I2C2_SDA                            0x0020 0x0368 0x07B4 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO03__USDHC1_WP                           0x0020 0x0368 0x0868 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO03__ENET1_REF_CLK_25M                   0x0020 0x0368 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK                     0x0020 0x0368 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO03__WDOG2_WDOG_B                        0x0020 0x0368 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3                          0x0020 0x0368 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP                        0x0020 0x0368 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO03__PHY_TCK                             0x0020 0x0368 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_RX                            0x0024 0x036C 0x0830 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__UART1_TX                            0x0024 0x036C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B                      0x0024 0x036C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET1_MDC                           0x0024 0x036C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT                      0x0024 0x036C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO04__ENET2_REF_CLK2                      0x0024 0x036C 0x076C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4                          0x0024 0x036C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP                        0x0024 0x036C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO04__PHY_TMS                             0x0024 0x036C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO05__UART1_RX                            0x0028 0x0370 0x0830 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO05__UART1_TX                            0x0028 0x0370 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT                      0x0028 0x0370 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO                          0x0028 0x0370 0x0764 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK                   0x0028 0x0370 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO05__ENET1_REF_CLK1                      0x0028 0x0370 0x0760 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5                          0x0028 0x0370 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK                      0x0028 0x0370 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO05__PHY_TDO                             0x0028 0x0370 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_RX                            0x002C 0x0374 0x0838 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART2_TX                            0x002C 0x0374 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B                         0x002C 0x0374 0x086C 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO06__ENET2_MDC                           0x002C 0x0374 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK                           0x002C 0x0374 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B                         0x002C 0x0374 0x082C 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6                          0x002C 0x0374 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET                    0x002C 0x0374 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED     0x002C 0x0374 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART2_RX                            0x0030 0x0378 0x0838 0x0 0x1
+#define MX6SX_PAD_GPIO1_IO07__UART2_TX                            0x0030 0x0378 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP                           0x0030 0x0378 0x0870 0x1 0x1
+#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO                          0x0030 0x0378 0x0770 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK                         0x0030 0x0378 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B                         0x0030 0x0378 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7                          0x0030 0x0378 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET                     0x0030 0x0378 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT                           0x0030 0x0378 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO07__VDEC_DEBUG_44                       0x0030 0x0378 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC                         0x0034 0x037C 0x0860 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B                        0x0034 0x037C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0                    0x0034 0x037C 0x081C 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY                        0x0034 0x037C 0x069C 0x3 0x1
+#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B                         0x0034 0x037C 0x0834 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8                          0x0034 0x037C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET                    0x0034 0x037C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT                           0x0034 0x037C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO08__VDEC_DEBUG_43                       0x0034 0x037C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR                        0x0038 0x0380 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B                        0x0038 0x0380 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1                    0x0038 0x0380 0x0820 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0                            0x0038 0x0380 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B                         0x0038 0x0380 0x0000 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9                          0x0038 0x0380 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT                        0x0038 0x0380 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4                   0x0038 0x0380 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO09__VDEC_DEBUG_42                       0x0038 0x0380 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID                      0x003C 0x0384 0x0624 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO10__SPDIF_EXT_CLK                       0x003C 0x0384 0x0828 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO10__PWM1_OUT                            0x003C 0x0384 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO10__CCM_OUT1                            0x003C 0x0384 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSI1_FIELD                          0x003C 0x0384 0x070C 0x4 0x1
+#define MX6SX_PAD_GPIO1_IO10__GPIO1_IO_10                         0x003C 0x0384 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO10__CSU_CSU_INT_DEB                     0x003C 0x0384 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3                   0x003C 0x0384 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO10__VDEC_DEBUG_41                       0x003C 0x0384 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO11__USB_OTG2_OC                         0x0040 0x0388 0x085C 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO11__SPDIF_IN                            0x0040 0x0388 0x0824 0x1 0x2
+#define MX6SX_PAD_GPIO1_IO11__PWM2_OUT                            0x0040 0x0388 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO11__CCM_CLKO1                           0x0040 0x0388 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO11__MLB_DATA                            0x0040 0x0388 0x07EC 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO11__GPIO1_IO_11                         0x0040 0x0388 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0                 0x0040 0x0388 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2                   0x0040 0x0388 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO11__VDEC_DEBUG_40                       0x0040 0x0388 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR                        0x0044 0x038C 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO12__SPDIF_OUT                           0x0044 0x038C 0x0000 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO12__PWM3_OUT                            0x0044 0x038C 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO12__CCM_CLKO2                           0x0044 0x038C 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO12__MLB_CLK                             0x0044 0x038C 0x07E8 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12                         0x0044 0x038C 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1                 0x0044 0x038C 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1                   0x0044 0x038C 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO12__VDEC_DEBUG_39                       0x0044 0x038C 0x0000 0x8 0x0
+#define MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY                      0x0048 0x0390 0x0000 0x0 0x0
+#define MX6SX_PAD_GPIO1_IO13__ANATOP_OTG2_ID                      0x0048 0x0390 0x0628 0x1 0x0
+#define MX6SX_PAD_GPIO1_IO13__PWM4_OUT                            0x0048 0x0390 0x0000 0x2 0x0
+#define MX6SX_PAD_GPIO1_IO13__CCM_OUT2                            0x0048 0x0390 0x0000 0x3 0x0
+#define MX6SX_PAD_GPIO1_IO13__MLB_SIG                             0x0048 0x0390 0x07F0 0x4 0x0
+#define MX6SX_PAD_GPIO1_IO13__GPIO1_IO_13                         0x0048 0x0390 0x0000 0x5 0x0
+#define MX6SX_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2                 0x0048 0x0390 0x0000 0x6 0x0
+#define MX6SX_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0                   0x0048 0x0390 0x0000 0x7 0x0
+#define MX6SX_PAD_GPIO1_IO13__VDEC_DEBUG_38                       0x0048 0x0390 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__CSI1_DATA_2                         0x004C 0x0394 0x06A8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK                         0x004C 0x0394 0x078C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC                     0x004C 0x0394 0x0684 0x2 0x1
+#define MX6SX_PAD_CSI_DATA00__I2C1_SCL                            0x004C 0x0394 0x07A8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA00__UART6_RI_B                          0x004C 0x0394 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA00__GPIO1_IO_14                         0x004C 0x0394 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA00__WEIM_DATA_23                        0x004C 0x0394 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK                        0x004C 0x0394 0x0800 0x7 0x0
+#define MX6SX_PAD_CSI_DATA00__VADC_DATA_4                         0x004C 0x0394 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA00__MMDC_DEBUG_37                       0x004C 0x0394 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA01__CSI1_DATA_3                         0x0050 0x0398 0x06AC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA01__ESAI_TX_FS                          0x0050 0x0398 0x077C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS                    0x0050 0x0398 0x0688 0x2 0x1
+#define MX6SX_PAD_CSI_DATA01__I2C1_SDA                            0x0050 0x0398 0x07AC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA01__UART6_DSR_B                         0x0050 0x0398 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA01__GPIO1_IO_15                         0x0050 0x0398 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA01__WEIM_DATA_22                        0x0050 0x0398 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC                        0x0050 0x0398 0x0804 0x7 0x0
+#define MX6SX_PAD_CSI_DATA01__VADC_DATA_5                         0x0050 0x0398 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA01__MMDC_DEBUG_38                       0x0050 0x0398 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA02__CSI1_DATA_4                         0x0054 0x039C 0x06B0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK                         0x0054 0x039C 0x0788 0x1 0x1
+#define MX6SX_PAD_CSI_DATA02__AUDMUX_AUD6_RXC                     0x0054 0x039C 0x067C 0x2 0x1
+#define MX6SX_PAD_CSI_DATA02__KPP_COL_5                           0x0054 0x039C 0x07C8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA02__UART6_DTR_B                         0x0054 0x039C 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA02__GPIO1_IO_16                         0x0054 0x039C 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA02__WEIM_DATA_21                        0x0054 0x039C 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA02__SAI1_RX_BCLK                        0x0054 0x039C 0x07F4 0x7 0x0
+#define MX6SX_PAD_CSI_DATA02__VADC_DATA_6                         0x0054 0x039C 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA02__MMDC_DEBUG_39                       0x0054 0x039C 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA03__CSI1_DATA_5                         0x0058 0x03A0 0x06B4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA03__ESAI_RX_FS                          0x0058 0x03A0 0x0778 0x1 0x1
+#define MX6SX_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS                    0x0058 0x03A0 0x0680 0x2 0x1
+#define MX6SX_PAD_CSI_DATA03__KPP_ROW_5                           0x0058 0x03A0 0x07D4 0x3 0x0
+#define MX6SX_PAD_CSI_DATA03__UART6_DCD_B                         0x0058 0x03A0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA03__GPIO1_IO_17                         0x0058 0x03A0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA03__WEIM_DATA_20                        0x0058 0x03A0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA03__SAI1_RX_SYNC                        0x0058 0x03A0 0x07FC 0x7 0x0
+#define MX6SX_PAD_CSI_DATA03__VADC_DATA_7                         0x0058 0x03A0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA03__MMDC_DEBUG_40                       0x0058 0x03A0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA04__CSI1_DATA_6                         0x005C 0x03A4 0x06B8 0x0 0x0
+#define MX6SX_PAD_CSI_DATA04__ESAI_TX1                            0x005C 0x03A4 0x0794 0x1 0x1
+#define MX6SX_PAD_CSI_DATA04__SPDIF_OUT                           0x005C 0x03A4 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_DATA04__KPP_COL_6                           0x005C 0x03A4 0x07CC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_RX                            0x005C 0x03A4 0x0858 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__UART6_TX                            0x005C 0x03A4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18                         0x005C 0x03A4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19                        0x005C 0x03A4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA04__PWM5_OUT                            0x005C 0x03A4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA04__VADC_DATA_8                         0x005C 0x03A4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA04__MMDC_DEBUG_41                       0x005C 0x03A4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA05__CSI1_DATA_7                         0x0060 0x03A8 0x06BC 0x0 0x0
+#define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1                        0x0060 0x03A8 0x07A0 0x1 0x1
+#define MX6SX_PAD_CSI_DATA05__SPDIF_IN                            0x0060 0x03A8 0x0824 0x2 0x1
+#define MX6SX_PAD_CSI_DATA05__KPP_ROW_6                           0x0060 0x03A8 0x07D8 0x3 0x0
+#define MX6SX_PAD_CSI_DATA05__UART6_RX                            0x0060 0x03A8 0x0858 0x4 0x1
+#define MX6SX_PAD_CSI_DATA05__UART6_TX                            0x0060 0x03A8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19                         0x0060 0x03A8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18                        0x0060 0x03A8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA05__PWM6_OUT                            0x0060 0x03A8 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA05__VADC_DATA_9                         0x0060 0x03A8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA05__MMDC_DEBUG_42                       0x0060 0x03A8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA06__CSI1_DATA_8                         0x0064 0x03AC 0x06C0 0x0 0x0
+#define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3                        0x0064 0x03AC 0x0798 0x1 0x1
+#define MX6SX_PAD_CSI_DATA06__I2C4_SCL                            0x0064 0x03AC 0x07C0 0x2 0x2
+#define MX6SX_PAD_CSI_DATA06__KPP_COL_7                           0x0064 0x03AC 0x07D0 0x3 0x0
+#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B                         0x0064 0x03AC 0x0854 0x4 0x0
+#define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20                         0x0064 0x03AC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17                        0x0064 0x03AC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA06__DCIC2_OUT                           0x0064 0x03AC 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA06__VADC_DATA_10                        0x0064 0x03AC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA06__MMDC_DEBUG_43                       0x0064 0x03AC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_DATA07__CSI1_DATA_9                         0x0068 0x03B0 0x06C4 0x0 0x0
+#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2                        0x0068 0x03B0 0x079C 0x1 0x1
+#define MX6SX_PAD_CSI_DATA07__I2C4_SDA                            0x0068 0x03B0 0x07C4 0x2 0x2
+#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7                           0x0068 0x03B0 0x07DC 0x3 0x0
+#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B                         0x0068 0x03B0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21                         0x0068 0x03B0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16                        0x0068 0x03B0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT                           0x0068 0x03B0 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_DATA07__VADC_DATA_11                        0x0068 0x03B0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_DATA07__MMDC_DEBUG_44                       0x0068 0x03B0 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC                           0x006C 0x03B4 0x0700 0x0 0x0
+#define MX6SX_PAD_CSI_HSYNC__ESAI_TX0                             0x006C 0x03B4 0x0790 0x1 0x1
+#define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD                      0x006C 0x03B4 0x0678 0x2 0x1
+#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B                          0x006C 0x03B4 0x0844 0x3 0x2
+#define MX6SX_PAD_CSI_HSYNC__MQS_LEFT                             0x006C 0x03B4 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22                          0x006C 0x03B4 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25                         0x006C 0x03B4 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0                       0x006C 0x03B4 0x0000 0x7 0x0
+#define MX6SX_PAD_CSI_HSYNC__VADC_DATA_2                          0x006C 0x03B4 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_HSYNC__MMDC_DEBUG_35                        0x006C 0x03B4 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_MCLK                             0x0070 0x03B8 0x0000 0x0 0x0
+#define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK                        0x0070 0x03B8 0x0784 0x1 0x1
+#define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT                        0x0070 0x03B8 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_MCLK__UART4_RX                              0x0070 0x03B8 0x0848 0x3 0x2
+#define MX6SX_PAD_CSI_MCLK__UART4_TX                              0x0070 0x03B8 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT                        0x0070 0x03B8 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23                           0x0070 0x03B8 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26                          0x0070 0x03B8 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_MCLK__CSI1_FIELD                            0x0070 0x03B8 0x070C 0x7 0x0
+#define MX6SX_PAD_CSI_MCLK__VADC_DATA_1                           0x0070 0x03B8 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_MCLK__MMDC_DEBUG_34                         0x0070 0x03B8 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK                         0x0074 0x03BC 0x0704 0x0 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK                      0x0074 0x03BC 0x0780 0x1 0x1
+#define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK                         0x0074 0x03BC 0x0000 0x2 0x0
+#define MX6SX_PAD_CSI_PIXCLK__UART4_RX                            0x0074 0x03BC 0x0848 0x3 0x3
+#define MX6SX_PAD_CSI_PIXCLK__UART4_TX                            0x0074 0x03BC 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT                      0x0074 0x03BC 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24                         0x0074 0x03BC 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27                        0x0074 0x03BC 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK                      0x0074 0x03BC 0x0784 0x7 0x2
+#define MX6SX_PAD_CSI_PIXCLK__VADC_CLK                            0x0074 0x03BC 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_PIXCLK__MMDC_DEBUG_33                       0x0074 0x03BC 0x0000 0x9 0x0
+#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC                           0x0078 0x03C0 0x0708 0x0 0x0
+#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0                         0x0078 0x03C0 0x07A4 0x1 0x1
+#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD                      0x0078 0x03C0 0x0674 0x2 0x1
+#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B                          0x0078 0x03C0 0x0000 0x3 0x0
+#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT                            0x0078 0x03C0 0x0000 0x4 0x0
+#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25                          0x0078 0x03C0 0x0000 0x5 0x0
+#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24                         0x0078 0x03C0 0x0000 0x6 0x0
+#define MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0                       0x0078 0x03C0 0x07F8 0x7 0x0
+#define MX6SX_PAD_CSI_VSYNC__VADC_DATA_3                          0x0078 0x03C0 0x0000 0x8 0x0
+#define MX6SX_PAD_CSI_VSYNC__MMDC_DEBUG_36                        0x0078 0x03C0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_COL__ENET1_COL                            0x007C 0x03C4 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_COL__ENET2_MDC                            0x007C 0x03C4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_COL__AUDMUX_AUD4_TXC                      0x007C 0x03C4 0x0654 0x2 0x1
+#define MX6SX_PAD_ENET1_COL__UART1_RI_B                           0x007C 0x03C4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_COL__SPDIF_EXT_CLK                        0x007C 0x03C4 0x0828 0x4 0x1
+#define MX6SX_PAD_ENET1_COL__GPIO2_IO_0                           0x007C 0x03C4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_COL__CSI2_DATA_23                         0x007C 0x03C4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_COL__LCDIF2_DATA_16                       0x007C 0x03C4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_COL__VDEC_DEBUG_37                        0x007C 0x03C4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31                   0x007C 0x03C4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET1_CRS                            0x0080 0x03C8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_CRS__ENET2_MDIO                           0x0080 0x03C8 0x0770 0x1 0x1
+#define MX6SX_PAD_ENET1_CRS__AUDMUX_AUD4_TXD                      0x0080 0x03C8 0x0648 0x2 0x1
+#define MX6SX_PAD_ENET1_CRS__UART1_DCD_B                          0x0080 0x03C8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_CRS__SPDIF_LOCK                           0x0080 0x03C8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_CRS__GPIO2_IO_1                           0x0080 0x03C8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_CRS__CSI2_DATA_22                         0x0080 0x03C8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_CRS__LCDIF2_DATA_17                       0x0080 0x03C8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_CRS__VDEC_DEBUG_36                        0x0080 0x03C8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30                   0x0080 0x03C8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET1_MDC                            0x0084 0x03CC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_MDC__ENET2_MDC                            0x0084 0x03CC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS                     0x0084 0x03CC 0x0638 0x2 0x1
+#define MX6SX_PAD_ENET1_MDC__ANATOP_24M_OUT                       0x0084 0x03CC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDC__EPIT2_OUT                            0x0084 0x03CC 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDC__GPIO2_IO_2                           0x0084 0x03CC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDC__USB_OTG1_PWR                         0x0084 0x03CC 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_MDC__PWM7_OUT                             0x0084 0x03CC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_MDIO__ENET1_MDIO                          0x0088 0x03D0 0x0764 0x0 0x1
+#define MX6SX_PAD_ENET1_MDIO__ENET2_MDIO                          0x0088 0x03D0 0x0770 0x1 0x2
+#define MX6SX_PAD_ENET1_MDIO__AUDMUX_MCLK                         0x0088 0x03D0 0x0000 0x2 0x0
+#define MX6SX_PAD_ENET1_MDIO__OSC32K_32K_OUT                      0x0088 0x03D0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_MDIO__EPIT1_OUT                           0x0088 0x03D0 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_MDIO__GPIO2_IO_3                          0x0088 0x03D0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_MDIO__USB_OTG1_OC                         0x0088 0x03D0 0x0860 0x6 0x1
+#define MX6SX_PAD_ENET1_MDIO__PWM8_OUT                            0x0088 0x03D0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_RX_CLK                      0x008C 0x03D4 0x0768 0x0 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M                 0x008C 0x03D4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS                  0x008C 0x03D4 0x0658 0x2 0x1
+#define MX6SX_PAD_ENET1_RX_CLK__UART1_DSR_B                       0x008C 0x03D4 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__SPDIF_OUT                         0x008C 0x03D4 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4                        0x008C 0x03D4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__CSI2_DATA_21                      0x008C 0x03D4 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__LCDIF2_DATA_18                    0x008C 0x03D4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35                     0x008C 0x03D4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29                0x008C 0x03D4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK                      0x0090 0x03D8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1                    0x0090 0x03D8 0x0760 0x1 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD                   0x0090 0x03D8 0x0644 0x2 0x1
+#define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B                       0x0090 0x03D8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__SPDIF_SR_CLK                      0x0090 0x03D8 0x0000 0x4 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5                        0x0090 0x03D8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__CSI2_DATA_20                      0x0090 0x03D8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__LCDIF2_DATA_19                    0x0090 0x03D8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__VDEC_DEBUG_34                     0x0090 0x03D8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28                0x0090 0x03D8 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_COL__ENET2_COL                            0x0094 0x03DC 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_COL__ENET1_MDC                            0x0094 0x03DC 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC                      0x0094 0x03DC 0x064C 0x2 0x1
+#define MX6SX_PAD_ENET2_COL__UART1_RX                             0x0094 0x03DC 0x0830 0x3 0x2
+#define MX6SX_PAD_ENET2_COL__UART1_TX                             0x0094 0x03DC 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_COL__SPDIF_IN                             0x0094 0x03DC 0x0824 0x4 0x3
+#define MX6SX_PAD_ENET2_COL__GPIO2_IO_6                           0x0094 0x03DC 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID                       0x0094 0x03DC 0x0624 0x6 0x1
+#define MX6SX_PAD_ENET2_COL__LCDIF2_DATA_20                       0x0094 0x03DC 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_COL__VDEC_DEBUG_33                        0x0094 0x03DC 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27                   0x0094 0x03DC 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET2_CRS                            0x0098 0x03E0 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_CRS__ENET1_MDIO                           0x0098 0x03E0 0x0764 0x1 0x2
+#define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS                     0x0098 0x03E0 0x0650 0x2 0x1
+#define MX6SX_PAD_ENET2_CRS__UART1_RX                             0x0098 0x03E0 0x0830 0x3 0x3
+#define MX6SX_PAD_ENET2_CRS__UART1_TX                             0x0098 0x03E0 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_CRS__MLB_SIG                              0x0098 0x03E0 0x07F0 0x4 0x1
+#define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7                           0x0098 0x03E0 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID                       0x0098 0x03E0 0x0628 0x6 0x1
+#define MX6SX_PAD_ENET2_CRS__LCDIF2_DATA_21                       0x0098 0x03E0 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_CRS__VDEC_DEBUG_32                        0x0098 0x03E0 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26                   0x0098 0x03E0 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK                      0x009C 0x03E4 0x0774 0x0 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M                 0x009C 0x03E4 0x0000 0x1 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL                          0x009C 0x03E4 0x07B8 0x2 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B                       0x009C 0x03E4 0x082C 0x3 0x2
+#define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA                          0x009C 0x03E4 0x07EC 0x4 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8                        0x009C 0x03E4 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC                       0x009C 0x03E4 0x085C 0x6 0x1
+#define MX6SX_PAD_ENET2_RX_CLK__LCDIF2_DATA_22                    0x009C 0x03E4 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__VDEC_DEBUG_31                     0x009C 0x03E4 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25                0x009C 0x03E4 0x0000 0x9 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK                      0x00A0 0x03E8 0x0000 0x0 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2                    0x00A0 0x03E8 0x076C 0x1 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA                          0x00A0 0x03E8 0x07BC 0x2 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B                       0x00A0 0x03E8 0x0000 0x3 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK                           0x00A0 0x03E8 0x07E8 0x4 0x1
+#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9                        0x00A0 0x03E8 0x0000 0x5 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR                      0x00A0 0x03E8 0x0000 0x6 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__LCDIF2_DATA_23                    0x00A0 0x03E8 0x0000 0x7 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__VDEC_DEBUG_30                     0x00A0 0x03E8 0x0000 0x8 0x0
+#define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24                0x00A0 0x03E8 0x0000 0x9 0x0
+#define MX6SX_PAD_KEY_COL0__KPP_COL_0                             0x00A4 0x03EC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL0__USDHC3_CD_B                           0x00A4 0x03EC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL0__UART6_RTS_B                           0x00A4 0x03EC 0x0854 0x2 0x2
+#define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK                           0x00A4 0x03EC 0x0710 0x3 0x0
+#define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC                       0x00A4 0x03EC 0x066C 0x4 0x0
+#define MX6SX_PAD_KEY_COL0__GPIO2_IO_10                           0x00A4 0x03EC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL0__SDMA_EXT_EVENT_1                      0x00A4 0x03EC 0x0820 0x6 0x1
+#define MX6SX_PAD_KEY_COL0__SAI2_TX_BCLK                          0x00A4 0x03EC 0x0814 0x7 0x0
+#define MX6SX_PAD_KEY_COL0__VADC_DATA_0                           0x00A4 0x03EC 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_COL1__KPP_COL_1                             0x00A8 0x03F0 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B                        0x00A8 0x03F0 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL1__UART6_RX                              0x00A8 0x03F0 0x0858 0x2 0x2
+#define MX6SX_PAD_KEY_COL1__UART6_TX                              0x00A8 0x03F0 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL1__ECSPI1_MISO                           0x00A8 0x03F0 0x0714 0x3 0x0
+#define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS                      0x00A8 0x03F0 0x0670 0x4 0x0
+#define MX6SX_PAD_KEY_COL1__GPIO2_IO_11                           0x00A8 0x03F0 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL1__USDHC3_RESET                          0x00A8 0x03F0 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC                          0x00A8 0x03F0 0x0818 0x7 0x0
+#define MX6SX_PAD_KEY_COL2__KPP_COL_2                             0x00AC 0x03F4 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL2__USDHC4_CD_B                           0x00AC 0x03F4 0x0874 0x1 0x1
+#define MX6SX_PAD_KEY_COL2__UART5_RTS_B                           0x00AC 0x03F4 0x084C 0x2 0x2
+#define MX6SX_PAD_KEY_COL2__CAN1_TX                               0x00AC 0x03F4 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL2__CANFD_TX1                             0x00AC 0x03F4 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL2__GPIO2_IO_12                           0x00AC 0x03F4 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL2__WEIM_DATA_30                          0x00AC 0x03F4 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL2__ECSPI1_RDY                            0x00AC 0x03F4 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL3__KPP_COL_3                             0x00B0 0x03F8 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL3__USDHC4_LCTL                           0x00B0 0x03F8 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL3__UART5_RX                              0x00B0 0x03F8 0x0850 0x2 0x2
+#define MX6SX_PAD_KEY_COL3__UART5_TX                              0x00B0 0x03F8 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_COL3__CAN2_TX                               0x00B0 0x03F8 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL3__CANFD_TX2                             0x00B0 0x03F8 0x0000 0x4 0x0
+#define MX6SX_PAD_KEY_COL3__GPIO2_IO_13                           0x00B0 0x03F8 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL3__WEIM_DATA_28                          0x00B0 0x03F8 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL3__ECSPI1_SS2                            0x00B0 0x03F8 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_COL4__KPP_COL_4                             0x00B4 0x03FC 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_COL4__ENET2_MDC                             0x00B4 0x03FC 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_COL4__I2C3_SCL                              0x00B4 0x03FC 0x07B8 0x2 0x2
+#define MX6SX_PAD_KEY_COL4__USDHC2_LCTL                           0x00B4 0x03FC 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_COL4__AUDMUX_AUD5_RXC                       0x00B4 0x03FC 0x0664 0x4 0x0
+#define MX6SX_PAD_KEY_COL4__GPIO2_IO_14                           0x00B4 0x03FC 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_COL4__WEIM_CRE                              0x00B4 0x03FC 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK                          0x00B4 0x03FC 0x0808 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0                             0x00B8 0x0400 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW0__USDHC3_WP                             0x00B8 0x0400 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B                           0x00B8 0x0400 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI                           0x00B8 0x0400 0x0718 0x3 0x0
+#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD                       0x00B8 0x0400 0x0660 0x4 0x0
+#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15                           0x00B8 0x0400 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW0__SDMA_EXT_EVENT_0                      0x00B8 0x0400 0x081C 0x6 0x1
+#define MX6SX_PAD_KEY_ROW0__SAI2_TX_DATA_0                        0x00B8 0x0400 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW0__GPU_IDLE                              0x00B8 0x0400 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW1__KPP_ROW_1                             0x00BC 0x0404 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT                        0x00BC 0x0404 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW1__UART6_RX                              0x00BC 0x0404 0x0858 0x2 0x3
+#define MX6SX_PAD_KEY_ROW1__UART6_TX                              0x00BC 0x0404 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0                            0x00BC 0x0404 0x071C 0x3 0x0
+#define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD                       0x00BC 0x0404 0x065C 0x4 0x0
+#define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16                           0x00BC 0x0404 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW1__WEIM_DATA_31                          0x00BC 0x0404 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW1__SAI2_RX_DATA_0                        0x00BC 0x0404 0x080C 0x7 0x0
+#define MX6SX_PAD_KEY_ROW1__M4_NMI                                0x00BC 0x0404 0x0000 0x8 0x0
+#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2                             0x00C0 0x0408 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW2__USDHC4_WP                             0x00C0 0x0408 0x0878 0x1 0x1
+#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B                           0x00C0 0x0408 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW2__CAN1_RX                               0x00C0 0x0408 0x068C 0x3 0x1
+#define MX6SX_PAD_KEY_ROW2__CANFD_RX1                             0x00C0 0x0408 0x0694 0x4 0x1
+#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17                           0x00C0 0x0408 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW2__WEIM_DATA_29                          0x00C0 0x0408 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3                            0x00C0 0x0408 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW3__KPP_ROW_3                             0x00C4 0x040C 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL                           0x00C4 0x040C 0x0000 0x1 0x0
+#define MX6SX_PAD_KEY_ROW3__UART5_RX                              0x00C4 0x040C 0x0850 0x2 0x3
+#define MX6SX_PAD_KEY_ROW3__UART5_TX                              0x00C4 0x040C 0x0000 0x2 0x0
+#define MX6SX_PAD_KEY_ROW3__CAN2_RX                               0x00C4 0x040C 0x0690 0x3 0x1
+#define MX6SX_PAD_KEY_ROW3__CANFD_RX2                             0x00C4 0x040C 0x0698 0x4 0x1
+#define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18                           0x00C4 0x040C 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW3__WEIM_DTACK_B                          0x00C4 0x040C 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW3__ECSPI1_SS1                            0x00C4 0x040C 0x0000 0x7 0x0
+#define MX6SX_PAD_KEY_ROW4__KPP_ROW_4                             0x00C8 0x0410 0x0000 0x0 0x0
+#define MX6SX_PAD_KEY_ROW4__ENET2_MDIO                            0x00C8 0x0410 0x0770 0x1 0x3
+#define MX6SX_PAD_KEY_ROW4__I2C3_SDA                              0x00C8 0x0410 0x07BC 0x2 0x2
+#define MX6SX_PAD_KEY_ROW4__USDHC1_LCTL                           0x00C8 0x0410 0x0000 0x3 0x0
+#define MX6SX_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS                      0x00C8 0x0410 0x0668 0x4 0x0
+#define MX6SX_PAD_KEY_ROW4__GPIO2_IO_19                           0x00C8 0x0410 0x0000 0x5 0x0
+#define MX6SX_PAD_KEY_ROW4__WEIM_ACLK_FREERUN                     0x00C8 0x0410 0x0000 0x6 0x0
+#define MX6SX_PAD_KEY_ROW4__SAI2_RX_SYNC                          0x00C8 0x0410 0x0810 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_CLK                            0x00CC 0x0414 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_CLK__LCDIF1_WR_RWN                         0x00CC 0x0414 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_CLK__AUDMUX_AUD3_RXC                       0x00CC 0x0414 0x0634 0x2 0x1
+#define MX6SX_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN                  0x00CC 0x0414 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_CLK__CSI1_DATA_16                          0x00CC 0x0414 0x06DC 0x4 0x0
+#define MX6SX_PAD_LCD1_CLK__GPIO3_IO_0                            0x00CC 0x0414 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_CLK__USDHC1_WP                             0x00CC 0x0414 0x0868 0x6 0x0
+#define MX6SX_PAD_LCD1_CLK__SIM_M_HADDR_16                        0x00CC 0x0414 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_CLK__VADC_TEST_0                           0x00CC 0x0414 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_CLK__MMDC_DEBUG_0                          0x00CC 0x0414 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0                      0x00D0 0x0418 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA00__WEIM_CS1_B                         0x00D0 0x0418 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA00__M4_TRACE_0                         0x00D0 0x0418 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA00__KITTEN_TRACE_0                     0x00D0 0x0418 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA00__CSI1_DATA_20                       0x00D0 0x0418 0x06EC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA00__GPIO3_IO_1                         0x00D0 0x0418 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA00__SRC_BT_CFG_0                       0x00D0 0x0418 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA00__SIM_M_HADDR_21                     0x00D0 0x0418 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA00__VADC_TEST_5                        0x00D0 0x0418 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA00__MMDC_DEBUG_5                       0x00D0 0x0418 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1                      0x00D4 0x041C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA01__WEIM_CS2_B                         0x00D4 0x041C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA01__M4_TRACE_1                         0x00D4 0x041C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA01__KITTEN_TRACE_1                     0x00D4 0x041C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA01__CSI1_DATA_21                       0x00D4 0x041C 0x06F0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA01__GPIO3_IO_2                         0x00D4 0x041C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA01__SRC_BT_CFG_1                       0x00D4 0x041C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA01__SIM_M_HADDR_22                     0x00D4 0x041C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA01__VADC_TEST_6                        0x00D4 0x041C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA01__MMDC_DEBUG_6                       0x00D4 0x041C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2                      0x00D8 0x0420 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA02__WEIM_CS3_B                         0x00D8 0x0420 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA02__M4_TRACE_2                         0x00D8 0x0420 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA02__KITTEN_TRACE_2                     0x00D8 0x0420 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA02__CSI1_DATA_22                       0x00D8 0x0420 0x06F4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA02__GPIO3_IO_3                         0x00D8 0x0420 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA02__SRC_BT_CFG_2                       0x00D8 0x0420 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA02__SIM_M_HADDR_23                     0x00D8 0x0420 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA02__VADC_TEST_7                        0x00D8 0x0420 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA02__MMDC_DEBUG_7                       0x00D8 0x0420 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3                      0x00DC 0x0424 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA03__WEIM_ADDR_24                       0x00DC 0x0424 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA03__M4_TRACE_3                         0x00DC 0x0424 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA03__KITTEN_TRACE_3                     0x00DC 0x0424 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA03__CSI1_DATA_23                       0x00DC 0x0424 0x06F8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA03__GPIO3_IO_4                         0x00DC 0x0424 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA03__SRC_BT_CFG_3                       0x00DC 0x0424 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA03__SIM_M_HADDR_24                     0x00DC 0x0424 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA03__VADC_TEST_8                        0x00DC 0x0424 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA03__MMDC_DEBUG_8                       0x00DC 0x0424 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4                      0x00E0 0x0428 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA04__WEIM_ADDR_25                       0x00E0 0x0428 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA04__KITTEN_TRACE_4                     0x00E0 0x0428 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC                         0x00E0 0x0428 0x0708 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA04__GPIO3_IO_5                         0x00E0 0x0428 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA04__SRC_BT_CFG_4                       0x00E0 0x0428 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA04__SIM_M_HADDR_25                     0x00E0 0x0428 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA04__VADC_TEST_9                        0x00E0 0x0428 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA04__MMDC_DEBUG_9                       0x00E0 0x0428 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5                      0x00E4 0x042C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA05__WEIM_ADDR_26                       0x00E4 0x042C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA05__KITTEN_TRACE_5                     0x00E4 0x042C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC                         0x00E4 0x042C 0x0700 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA05__GPIO3_IO_6                         0x00E4 0x042C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA05__SRC_BT_CFG_5                       0x00E4 0x042C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA05__SIM_M_HADDR_26                     0x00E4 0x042C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA05__VADC_TEST_10                       0x00E4 0x042C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA05__MMDC_DEBUG_10                      0x00E4 0x042C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6                      0x00E8 0x0430 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA06__WEIM_EB_B_2                        0x00E8 0x0430 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA06__KITTEN_TRACE_6                     0x00E8 0x0430 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK                        0x00E8 0x0430 0x0704 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA06__GPIO3_IO_7                         0x00E8 0x0430 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA06__SRC_BT_CFG_6                       0x00E8 0x0430 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA06__SIM_M_HADDR_27                     0x00E8 0x0430 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA06__VADC_TEST_11                       0x00E8 0x0430 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA06__MMDC_DEBUG_11                      0x00E8 0x0430 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7                      0x00EC 0x0434 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA07__WEIM_EB_B_3                        0x00EC 0x0434 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA07__KITTEN_TRACE_7                     0x00EC 0x0434 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA07__CSI1_MCLK                          0x00EC 0x0434 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA07__GPIO3_IO_8                         0x00EC 0x0434 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA07__SRC_BT_CFG_7                       0x00EC 0x0434 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA07__SIM_M_HADDR_28                     0x00EC 0x0434 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA07__VADC_TEST_12                       0x00EC 0x0434 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA07__MMDC_DEBUG_12                      0x00EC 0x0434 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8                      0x00F0 0x0438 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA08__WEIM_AD_8                          0x00F0 0x0438 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA08__KITTEN_TRACE_8                     0x00F0 0x0438 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9                        0x00F0 0x0438 0x06C4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA08__GPIO3_IO_9                         0x00F0 0x0438 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA08__SRC_BT_CFG_8                       0x00F0 0x0438 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA08__SIM_M_HADDR_29                     0x00F0 0x0438 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA08__VADC_TEST_13                       0x00F0 0x0438 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA08__MMDC_DEBUG_13                      0x00F0 0x0438 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9                      0x00F4 0x043C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA09__WEIM_AD_9                          0x00F4 0x043C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA09__KITTEN_TRACE_9                     0x00F4 0x043C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8                        0x00F4 0x043C 0x06C0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA09__GPIO3_IO_10                        0x00F4 0x043C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA09__SRC_BT_CFG_9                       0x00F4 0x043C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA09__SIM_M_HADDR_30                     0x00F4 0x043C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA09__VADC_TEST_14                       0x00F4 0x043C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA09__MMDC_DEBUG_14                      0x00F4 0x043C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10                     0x00F8 0x0440 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA10__WEIM_AD_10                         0x00F8 0x0440 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA10__KITTEN_TRACE_10                    0x00F8 0x0440 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7                        0x00F8 0x0440 0x06BC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA10__GPIO3_IO_11                        0x00F8 0x0440 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA10__SRC_BT_CFG_10                      0x00F8 0x0440 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA10__SIM_M_HADDR_31                     0x00F8 0x0440 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA10__VADC_TEST_15                       0x00F8 0x0440 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA10__MMDC_DEBUG_15                      0x00F8 0x0440 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11                     0x00FC 0x0444 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA11__WEIM_AD_11                         0x00FC 0x0444 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA11__KITTEN_TRACE_11                    0x00FC 0x0444 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6                        0x00FC 0x0444 0x06B8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA11__GPIO3_IO_12                        0x00FC 0x0444 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA11__SRC_BT_CFG_11                      0x00FC 0x0444 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA11__SIM_M_HBURST_0                     0x00FC 0x0444 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA11__VADC_TEST_16                       0x00FC 0x0444 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA11__MMDC_DEBUG_16                      0x00FC 0x0444 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12                     0x0100 0x0448 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA12__WEIM_AD_12                         0x0100 0x0448 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA12__KITTEN_TRACE_12                    0x0100 0x0448 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5                        0x0100 0x0448 0x06B4 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA12__GPIO3_IO_13                        0x0100 0x0448 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA12__SRC_BT_CFG_12                      0x0100 0x0448 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA12__SIM_M_HBURST_1                     0x0100 0x0448 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA12__VADC_TEST_17                       0x0100 0x0448 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA12__MMDC_DEBUG_17                      0x0100 0x0448 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13                     0x0104 0x044C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA13__WEIM_AD_13                         0x0104 0x044C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA13__KITTEN_TRACE_13                    0x0104 0x044C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4                        0x0104 0x044C 0x06B0 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA13__GPIO3_IO_14                        0x0104 0x044C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA13__SRC_BT_CFG_13                      0x0104 0x044C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA13__SIM_M_HBURST_2                     0x0104 0x044C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA13__VADC_TEST_18                       0x0104 0x044C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA13__MMDC_DEBUG_18                      0x0104 0x044C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14                     0x0108 0x0450 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA14__WEIM_AD_14                         0x0108 0x0450 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA14__KITTEN_TRACE_14                    0x0108 0x0450 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3                        0x0108 0x0450 0x06AC 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA14__GPIO3_IO_15                        0x0108 0x0450 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA14__SRC_BT_CFG_14                      0x0108 0x0450 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA14__SIM_M_HMASTLOCK                    0x0108 0x0450 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA14__VADC_TEST_19                       0x0108 0x0450 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA14__MMDC_DEBUG_19                      0x0108 0x0450 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15                     0x010C 0x0454 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA15__WEIM_AD_15                         0x010C 0x0454 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA15__KITTEN_TRACE_15                    0x010C 0x0454 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2                        0x010C 0x0454 0x06A8 0x4 0x1
+#define MX6SX_PAD_LCD1_DATA15__GPIO3_IO_16                        0x010C 0x0454 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA15__SRC_BT_CFG_15                      0x010C 0x0454 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA15__SIM_M_HPROT_0                      0x010C 0x0454 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA15__VDEC_DEBUG_0                       0x010C 0x0454 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA15__MMDC_DEBUG_20                      0x010C 0x0454 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16                     0x0110 0x0458 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA16__WEIM_ADDR_16                       0x0110 0x0458 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA16__M4_TRACE_CLK                       0x0110 0x0458 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA16__KITTEN_TRACE_CLK                   0x0110 0x0458 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1                        0x0110 0x0458 0x06A4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA16__GPIO3_IO_17                        0x0110 0x0458 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA16__SRC_BT_CFG_24                      0x0110 0x0458 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA16__SIM_M_HPROT_1                      0x0110 0x0458 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA16__VDEC_DEBUG_1                       0x0110 0x0458 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA16__MMDC_DEBUG_21                      0x0110 0x0458 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17                     0x0114 0x045C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA17__WEIM_ADDR_17                       0x0114 0x045C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA17__KITTEN_TRACE_CTL                   0x0114 0x045C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0                        0x0114 0x045C 0x06A0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA17__GPIO3_IO_18                        0x0114 0x045C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA17__SRC_BT_CFG_25                      0x0114 0x045C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA17__SIM_M_HPROT_2                      0x0114 0x045C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA17__VDEC_DEBUG_2                       0x0114 0x045C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA17__MMDC_DEBUG_22                      0x0114 0x045C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18                     0x0118 0x0460 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA18__WEIM_ADDR_18                       0x0118 0x0460 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA18__M4_EVENTO                          0x0118 0x0460 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA18__KITTEN_EVENTO                      0x0118 0x0460 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA18__CSI1_DATA_15                       0x0118 0x0460 0x06D8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19                        0x0118 0x0460 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA18__SRC_BT_CFG_26                      0x0118 0x0460 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA18__SIM_M_HPROT_3                      0x0118 0x0460 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA18__VDEC_DEBUG_3                       0x0118 0x0460 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA18__MMDC_DEBUG_23                      0x0118 0x0460 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19                     0x011C 0x0464 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA19__WEIM_ADDR_19                       0x011C 0x0464 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA19__M4_TRACE_SWO                       0x011C 0x0464 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA19__CSI1_DATA_14                       0x011C 0x0464 0x06D4 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA19__GPIO3_IO_20                        0x011C 0x0464 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA19__SRC_BT_CFG_27                      0x011C 0x0464 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA19__SIM_M_HREADYOUT                    0x011C 0x0464 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA19__VDEC_DEBUG_4                       0x011C 0x0464 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA19__MMDC_DEBUG_24                      0x011C 0x0464 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20                     0x0120 0x0468 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA20__WEIM_ADDR_20                       0x0120 0x0468 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA20__PWM8_OUT                           0x0120 0x0468 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT              0x0120 0x0468 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA20__CSI1_DATA_13                       0x0120 0x0468 0x06D0 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA20__GPIO3_IO_21                        0x0120 0x0468 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA20__SRC_BT_CFG_28                      0x0120 0x0468 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA20__SIM_M_HRESP                        0x0120 0x0468 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA20__VDEC_DEBUG_5                       0x0120 0x0468 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA20__MMDC_DEBUG_25                      0x0120 0x0468 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21                     0x0124 0x046C 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA21__WEIM_ADDR_21                       0x0124 0x046C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA21__PWM7_OUT                           0x0124 0x046C 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT              0x0124 0x046C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA21__CSI1_DATA_12                       0x0124 0x046C 0x06CC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA21__GPIO3_IO_22                        0x0124 0x046C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA21__SRC_BT_CFG_29                      0x0124 0x046C 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA21__SIM_M_HSIZE_0                      0x0124 0x046C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA21__VDEC_DEBUG_6                       0x0124 0x046C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA21__MMDC_DEBUG_26                      0x0124 0x046C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22                     0x0128 0x0470 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA22__WEIM_ADDR_22                       0x0128 0x0470 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA22__PWM6_OUT                           0x0128 0x0470 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT              0x0128 0x0470 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA22__CSI1_DATA_11                       0x0128 0x0470 0x06C8 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23                        0x0128 0x0470 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA22__SRC_BT_CFG_30                      0x0128 0x0470 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA22__SIM_M_HSIZE_1                      0x0128 0x0470 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA22__VDEC_DEBUG_7                       0x0128 0x0470 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA22__MMDC_DEBUG_27                      0x0128 0x0470 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23                     0x012C 0x0474 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_DATA23__WEIM_ADDR_23                       0x012C 0x0474 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_DATA23__PWM5_OUT                           0x012C 0x0474 0x0000 0x2 0x0
+#define MX6SX_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT              0x012C 0x0474 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_DATA23__CSI1_DATA_10                       0x012C 0x0474 0x06FC 0x4 0x0
+#define MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24                        0x012C 0x0474 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_DATA23__SRC_BT_CFG_31                      0x012C 0x0474 0x0000 0x6 0x0
+#define MX6SX_PAD_LCD1_DATA23__SIM_M_HSIZE_2                      0x012C 0x0474 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_DATA23__VDEC_DEBUG_8                       0x012C 0x0474 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_DATA23__MMDC_DEBUG_28                      0x012C 0x0474 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE                      0x0130 0x0478 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_RD_E                        0x0130 0x0478 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC                    0x0130 0x0478 0x063C 0x2 0x1
+#define MX6SX_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN               0x0130 0x0478 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_ENABLE__CSI1_DATA_17                       0x0130 0x0478 0x06E0 0x4 0x0
+#define MX6SX_PAD_LCD1_ENABLE__GPIO3_IO_25                        0x0130 0x0478 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_ENABLE__USDHC1_CD_B                        0x0130 0x0478 0x0864 0x6 0x0
+#define MX6SX_PAD_LCD1_ENABLE__SIM_M_HADDR_17                     0x0130 0x0478 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_ENABLE__VADC_TEST_1                        0x0130 0x0478 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_ENABLE__MMDC_DEBUG_1                       0x0130 0x0478 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC                        0x0134 0x047C 0x07E0 0x0 0x0
+#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_RS                           0x0134 0x047C 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD                     0x0134 0x047C 0x0630 0x2 0x1
+#define MX6SX_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN                0x0134 0x047C 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_HSYNC__CSI1_DATA_18                        0x0134 0x047C 0x06E4 0x4 0x0
+#define MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26                         0x0134 0x047C 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_HSYNC__USDHC2_WP                           0x0134 0x047C 0x0870 0x6 0x0
+#define MX6SX_PAD_LCD1_HSYNC__SIM_M_HADDR_18                      0x0134 0x047C 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_HSYNC__VADC_TEST_2                         0x0134 0x047C 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_HSYNC__MMDC_DEBUG_2                        0x0134 0x047C 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_RESET                        0x0138 0x0480 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_RESET__LCDIF1_CS                           0x0138 0x0480 0x0000 0x1 0x0
+#define MX6SX_PAD_LCD1_RESET__AUDMUX_AUD3_RXD                     0x0138 0x0480 0x062C 0x2 0x1
+#define MX6SX_PAD_LCD1_RESET__KITTEN_EVENTI                       0x0138 0x0480 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_RESET__M4_EVENTI                           0x0138 0x0480 0x0000 0x4 0x0
+#define MX6SX_PAD_LCD1_RESET__GPIO3_IO_27                         0x0138 0x0480 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_RESET__CCM_PMIC_RDY                        0x0138 0x0480 0x069C 0x6 0x0
+#define MX6SX_PAD_LCD1_RESET__SIM_M_HADDR_20                      0x0138 0x0480 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_RESET__VADC_TEST_4                         0x0138 0x0480 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_RESET__MMDC_DEBUG_4                        0x0138 0x0480 0x0000 0x9 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC                        0x013C 0x0484 0x0000 0x0 0x0
+#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_BUSY                         0x013C 0x0484 0x07E0 0x1 0x1
+#define MX6SX_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS                    0x013C 0x0484 0x0640 0x2 0x1
+#define MX6SX_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN                0x013C 0x0484 0x0000 0x3 0x0
+#define MX6SX_PAD_LCD1_VSYNC__CSI1_DATA_19                        0x013C 0x0484 0x06E8 0x4 0x0
+#define MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28                         0x013C 0x0484 0x0000 0x5 0x0
+#define MX6SX_PAD_LCD1_VSYNC__USDHC2_CD_B                         0x013C 0x0484 0x086C 0x6 0x0
+#define MX6SX_PAD_LCD1_VSYNC__SIM_M_HADDR_19                      0x013C 0x0484 0x0000 0x7 0x0
+#define MX6SX_PAD_LCD1_VSYNC__VADC_TEST_3                         0x013C 0x0484 0x0000 0x8 0x0
+#define MX6SX_PAD_LCD1_VSYNC__MMDC_DEBUG_3                        0x013C 0x0484 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_ALE__RAWNAND_ALE                           0x0140 0x0488 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_ALE__I2C3_SDA                              0x0140 0x0488 0x07BC 0x1 0x0
+#define MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B                         0x0140 0x0488 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_ALE__ECSPI2_SS0                            0x0140 0x0488 0x072C 0x3 0x0
+#define MX6SX_PAD_NAND_ALE__ESAI_TX3_RX2                          0x0140 0x0488 0x079C 0x4 0x0
+#define MX6SX_PAD_NAND_ALE__GPIO4_IO_0                            0x0140 0x0488 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_ALE__WEIM_CS0_B                            0x0140 0x0488 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_ALE__TPSMP_HDATA_0                         0x0140 0x0488 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN             0x0140 0x0488 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_ALE__SDMA_DEBUG_PC_12                      0x0140 0x0488 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE0_B__RAWNAND_CE0_B                       0x0144 0x048C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE0_B__USDHC2_VSELECT                      0x0144 0x048C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2                      0x0144 0x048C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC                     0x0144 0x048C 0x0654 0x3 0x0
+#define MX6SX_PAD_NAND_CE0_B__ESAI_TX_CLK                         0x0144 0x048C 0x078C 0x4 0x0
+#define MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1                          0x0144 0x048C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE0_B__WEIM_LBA_B                          0x0144 0x048C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE0_B__TPSMP_HDATA_3                       0x0144 0x048C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ          0x0144 0x048C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9                     0x0144 0x048C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CE1_B__RAWNAND_CE1_B                       0x0148 0x0490 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CE1_B__USDHC3_RESET_B                      0x0148 0x0490 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3                      0x0148 0x0490 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD                     0x0148 0x0490 0x0648 0x3 0x0
+#define MX6SX_PAD_NAND_CE1_B__ESAI_TX0                            0x0148 0x0490 0x0790 0x4 0x0
+#define MX6SX_PAD_NAND_CE1_B__GPIO4_IO_2                          0x0148 0x0490 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CE1_B__WEIM_OE                             0x0148 0x0490 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CE1_B__TPSMP_HDATA_4                       0x0148 0x0490 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE      0x0148 0x0490 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8                     0x0148 0x0490 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_CLE__RAWNAND_CLE                           0x014C 0x0494 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_CLE__I2C3_SCL                              0x014C 0x0494 0x07B8 0x1 0x0
+#define MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK                          0x014C 0x0494 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_CLE__ECSPI2_SCLK                           0x014C 0x0494 0x0720 0x3 0x0
+#define MX6SX_PAD_NAND_CLE__ESAI_TX2_RX3                          0x014C 0x0494 0x0798 0x4 0x0
+#define MX6SX_PAD_NAND_CLE__GPIO4_IO_3                            0x014C 0x0494 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_CLE__WEIM_BCLK                             0x014C 0x0494 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_CLE__TPSMP_CLK                             0x014C 0x0494 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP             0x014C 0x0494 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_CLE__SDMA_DEBUG_PC_13                      0x014C 0x0494 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA00__RAWNAND_DATA00                     0x0150 0x0498 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA00__USDHC1_DATA4                       0x0150 0x0498 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1                     0x0150 0x0498 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA00__ECSPI5_MISO                        0x0150 0x0498 0x0754 0x3 0x0
+#define MX6SX_PAD_NAND_DATA00__ESAI_RX_CLK                        0x0150 0x0498 0x0788 0x4 0x0
+#define MX6SX_PAD_NAND_DATA00__GPIO4_IO_4                         0x0150 0x0498 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA00__WEIM_AD_0                          0x0150 0x0498 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA00__TPSMP_HDATA_7                      0x0150 0x0498 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET  0x0150 0x0498 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5         0x0150 0x0498 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA01__RAWNAND_DATA01                     0x0154 0x049C 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA01__USDHC1_DATA5                       0x0154 0x049C 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0                     0x0154 0x049C 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA01__ECSPI5_MOSI                        0x0154 0x049C 0x0758 0x3 0x0
+#define MX6SX_PAD_NAND_DATA01__ESAI_RX_FS                         0x0154 0x049C 0x0778 0x4 0x0
+#define MX6SX_PAD_NAND_DATA01__GPIO4_IO_5                         0x0154 0x049C 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA01__WEIM_AD_1                          0x0154 0x049C 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA01__TPSMP_HDATA_8                      0x0154 0x049C 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD      0x0154 0x049C 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4         0x0154 0x049C 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA02__RAWNAND_DATA02                     0x0158 0x04A0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA02__USDHC1_DATA6                       0x0158 0x04A0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK                       0x0158 0x04A0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA02__ECSPI5_SCLK                        0x0158 0x04A0 0x0750 0x3 0x0
+#define MX6SX_PAD_NAND_DATA02__ESAI_TX_HF_CLK                     0x0158 0x04A0 0x0784 0x4 0x0
+#define MX6SX_PAD_NAND_DATA02__GPIO4_IO_6                         0x0158 0x04A0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA02__WEIM_AD_2                          0x0158 0x04A0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA02__TPSMP_HDATA_9                      0x0158 0x04A0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV   0x0158 0x04A0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3         0x0158 0x04A0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA03__RAWNAND_DATA03                     0x015C 0x04A4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA03__USDHC1_DATA7                       0x015C 0x04A4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B                      0x015C 0x04A4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA03__ECSPI5_SS0                         0x015C 0x04A4 0x075C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA03__ESAI_RX_HF_CLK                     0x015C 0x04A4 0x0780 0x4 0x0
+#define MX6SX_PAD_NAND_DATA03__GPIO4_IO_7                         0x015C 0x04A4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA03__WEIM_AD_3                          0x015C 0x04A4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA03__TPSMP_HDATA_10                     0x015C 0x04A4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH     0x015C 0x04A4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6         0x015C 0x04A4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04                     0x0160 0x04A8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4                       0x0160 0x04A8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B                      0x0160 0x04A8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B                        0x0160 0x04A8 0x083C 0x3 0x0
+#define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS                   0x0160 0x04A8 0x0650 0x4 0x0
+#define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8                         0x0160 0x04A8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA04__WEIM_AD_4                          0x0160 0x04A8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA04__TPSMP_HDATA_11                     0x0160 0x04A8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH     0x0160 0x04A8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0            0x0160 0x04A8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05                     0x0164 0x04AC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5                       0x0164 0x04AC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS                        0x0164 0x04AC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B                        0x0164 0x04AC 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC                    0x0164 0x04AC 0x064C 0x4 0x0
+#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9                         0x0164 0x04AC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5                          0x0164 0x04AC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA05__TPSMP_HDATA_12                     0x0164 0x04AC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET  0x0164 0x04AC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1            0x0164 0x04AC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06                     0x0168 0x04B0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6                       0x0168 0x04B0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B                      0x0168 0x04B0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_RX                           0x0168 0x04B0 0x0840 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__UART3_TX                           0x0168 0x04B0 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA06__PWM3_OUT                           0x0168 0x04B0 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10                        0x0168 0x04B0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA06__WEIM_AD_6                          0x0168 0x04B0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA06__TPSMP_HDATA_13                     0x0168 0x04B0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD      0x0168 0x04B0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2            0x0168 0x04B0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07                     0x016C 0x04B4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7                       0x016C 0x04B4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS                        0x016C 0x04B4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_DATA07__UART3_RX                           0x016C 0x04B4 0x0840 0x3 0x1
+#define MX6SX_PAD_NAND_DATA07__UART3_TX                           0x016C 0x04B4 0x0000 0x3 0x0
+#define MX6SX_PAD_NAND_DATA07__PWM4_OUT                           0x016C 0x04B4 0x0000 0x4 0x0
+#define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11                        0x016C 0x04B4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_DATA07__WEIM_AD_7                          0x016C 0x04B4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_DATA07__TPSMP_HDATA_14                     0x016C 0x04B4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD      0x016C 0x04B4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3            0x016C 0x04B4 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_RE_B__RAWNAND_RE_B                         0x0170 0x04B8 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_RE_B__USDHC2_RESET_B                       0x0170 0x04B8 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3                       0x0170 0x04B8 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS                     0x0170 0x04B8 0x0658 0x3 0x0
+#define MX6SX_PAD_NAND_RE_B__ESAI_TX_FS                           0x0170 0x04B8 0x077C 0x4 0x0
+#define MX6SX_PAD_NAND_RE_B__GPIO4_IO_12                          0x0170 0x04B8 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_RE_B__WEIM_RW                              0x0170 0x04B8 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_RE_B__TPSMP_HDATA_5                        0x0170 0x04B8 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD        0x0170 0x04B8 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_RE_B__SDMA_DEBUG_PC_7                      0x0170 0x04B8 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_READY_B__RAWNAND_READY_B                   0x0174 0x04BC 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_READY_B__USDHC1_VSELECT                    0x0174 0x04BC 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1                    0x0174 0x04BC 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_READY_B__ECSPI2_MISO                       0x0174 0x04BC 0x0724 0x3 0x0
+#define MX6SX_PAD_NAND_READY_B__ESAI_TX1                          0x0174 0x04BC 0x0794 0x4 0x0
+#define MX6SX_PAD_NAND_READY_B__GPIO4_IO_13                       0x0174 0x04BC 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_READY_B__WEIM_EB_B_1                       0x0174 0x04BC 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_READY_B__TPSMP_HDATA_2                     0x0174 0x04BC 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN         0x0174 0x04BC 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_READY_B__SDMA_DEBUG_PC_10                  0x0174 0x04BC 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WE_B__RAWNAND_WE_B                         0x0178 0x04C0 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WE_B__USDHC4_VSELECT                       0x0178 0x04C0 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2                       0x0178 0x04C0 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WE_B__AUDMUX_AUD4_RXD                      0x0178 0x04C0 0x0644 0x3 0x0
+#define MX6SX_PAD_NAND_WE_B__ESAI_TX5_RX0                         0x0178 0x04C0 0x07A4 0x4 0x0
+#define MX6SX_PAD_NAND_WE_B__GPIO4_IO_14                          0x0178 0x04C0 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WE_B__WEIM_WAIT                            0x0178 0x04C0 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WE_B__TPSMP_HDATA_6                        0x0178 0x04C0 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV     0x0178 0x04C0 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WE_B__SDMA_DEBUG_PC_6                      0x0178 0x04C0 0x0000 0x9 0x0
+#define MX6SX_PAD_NAND_WP_B__RAWNAND_WP_B                         0x017C 0x04C4 0x0000 0x0 0x0
+#define MX6SX_PAD_NAND_WP_B__USDHC1_RESET_B                       0x017C 0x04C4 0x0000 0x1 0x0
+#define MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0                       0x017C 0x04C4 0x0000 0x2 0x0
+#define MX6SX_PAD_NAND_WP_B__ECSPI2_MOSI                          0x017C 0x04C4 0x0728 0x3 0x0
+#define MX6SX_PAD_NAND_WP_B__ESAI_TX4_RX1                         0x017C 0x04C4 0x07A0 0x4 0x0
+#define MX6SX_PAD_NAND_WP_B__GPIO4_IO_15                          0x017C 0x04C4 0x0000 0x5 0x0
+#define MX6SX_PAD_NAND_WP_B__WEIM_EB_B_0                          0x017C 0x04C4 0x0000 0x6 0x0
+#define MX6SX_PAD_NAND_WP_B__TPSMP_HDATA_1                        0x017C 0x04C4 0x0000 0x7 0x0
+#define MX6SX_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE       0x017C 0x04C4 0x0000 0x8 0x0
+#define MX6SX_PAD_NAND_WP_B__SDMA_DEBUG_PC_11                     0x017C 0x04C4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0                    0x0180 0x04C8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC                       0x0180 0x04C8 0x085C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__ECSPI1_MOSI                       0x0180 0x04C8 0x0718 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__ESAI_TX4_RX1                      0x0180 0x04C8 0x07A0 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA0__CSI1_DATA_14                      0x0180 0x04C8 0x06D4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16                       0x0180 0x04C8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__WEIM_DATA_6                       0x0180 0x04C8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SIM_M_HADDR_3                     0x0180 0x04C8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3           0x0180 0x04C8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1                    0x0184 0x04CC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID                    0x0184 0x04CC 0x0624 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__ECSPI1_MISO                       0x0184 0x04CC 0x0714 0x2 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__ESAI_TX1                          0x0184 0x04CC 0x0794 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA1__CSI1_DATA_13                      0x0184 0x04CC 0x06D0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17                       0x0184 0x04CC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__WEIM_DATA_5                       0x0184 0x04CC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SIM_M_HADDR_4                     0x0184 0x04CC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0                   0x0184 0x04CC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2                    0x0188 0x04D0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__USB_OTG1_PWR                      0x0188 0x04D0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ECSPI5_SS1                        0x0188 0x04D0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__ESAI_TX_CLK                       0x0188 0x04D0 0x078C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA2__CSI1_DATA_12                      0x0188 0x04D0 0x06CC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18                       0x0188 0x04D0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__WEIM_DATA_4                       0x0188 0x04D0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SIM_M_HADDR_6                     0x0188 0x04D0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1                   0x0188 0x04D0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3                    0x018C 0x04D4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__USB_OTG1_OC                       0x018C 0x04D4 0x0860 0x1 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__ECSPI5_SS2                        0x018C 0x04D4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__ESAI_TX0                          0x018C 0x04D4 0x0790 0x3 0x2
+#define MX6SX_PAD_QSPI1A_DATA3__CSI1_DATA_11                      0x018C 0x04D4 0x06C8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19                       0x018C 0x04D4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__WEIM_DATA_3                       0x018C 0x04D4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SIM_M_HADDR_7                     0x018C 0x04D4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2                   0x018C 0x04D4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_DQS__QSPI1_A_DQS                         0x0190 0x04D8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CAN2_TX                             0x0190 0x04D8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_DQS__CANFD_TX2                           0x0190 0x04D8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1A_DQS__ECSPI5_MOSI                         0x0190 0x04D8 0x0758 0x3 0x1
+#define MX6SX_PAD_QSPI1A_DQS__CSI1_DATA_15                        0x0190 0x04D8 0x06D8 0x4 0x1
+#define MX6SX_PAD_QSPI1A_DQS__GPIO4_IO_20                         0x0190 0x04D8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_DQS__WEIM_DATA_7                         0x0190 0x04D8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SIM_M_HADDR_13                      0x0190 0x04D8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4             0x0190 0x04D8 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK                       0x0194 0x04DC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID                     0x0194 0x04DC 0x0628 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__ECSPI1_SCLK                        0x0194 0x04DC 0x0710 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__ESAI_TX2_RX3                       0x0194 0x04DC 0x0798 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SCLK__CSI1_DATA_1                        0x0194 0x04DC 0x06A4 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21                        0x0194 0x04DC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__WEIM_DATA_0                        0x0194 0x04DC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SIM_M_HADDR_0                      0x0194 0x04DC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5                    0x0194 0x04DC 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B                     0x0198 0x04E0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__USB_OTG2_PWR                      0x0198 0x04E0 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__ECSPI1_SS0                        0x0198 0x04E0 0x071C 0x2 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2                      0x0198 0x04E0 0x079C 0x3 0x2
+#define MX6SX_PAD_QSPI1A_SS0_B__CSI1_DATA_0                       0x0198 0x04E0 0x06A0 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22                       0x0198 0x04E0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__WEIM_DATA_1                       0x0198 0x04E0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1                     0x0198 0x04E0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4                   0x0198 0x04E0 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B                     0x019C 0x04E4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX                           0x019C 0x04E4 0x068C 0x1 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1                         0x019C 0x04E4 0x0694 0x2 0x2
+#define MX6SX_PAD_QSPI1A_SS1_B__ECSPI5_MISO                       0x019C 0x04E4 0x0754 0x3 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__CSI1_DATA_10                      0x019C 0x04E4 0x06FC 0x4 0x1
+#define MX6SX_PAD_QSPI1A_SS1_B__GPIO4_IO_23                       0x019C 0x04E4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__WEIM_DATA_2                       0x019C 0x04E4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12                    0x019C 0x04E4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3                   0x019C 0x04E4 0x0000 0x9 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0                    0x01A0 0x04E8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B                       0x01A0 0x04E8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI                       0x01A0 0x04E8 0x0738 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS                        0x01A0 0x04E8 0x0778 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22                      0x01A0 0x04E8 0x06F4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24                       0x01A0 0x04E8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14                      0x01A0 0x04E8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9                     0x01A0 0x04E8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1                    0x01A4 0x04EC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B                       0x01A4 0x04EC 0x083C 0x1 0x5
+#define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO                       0x01A4 0x04EC 0x0734 0x2 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK                       0x01A4 0x04EC 0x0788 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21                      0x01A4 0x04EC 0x06F0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25                       0x01A4 0x04EC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__WEIM_DATA_13                      0x01A4 0x04EC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA1__SIM_M_HADDR_8                     0x01A4 0x04EC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2                    0x01A8 0x04F0 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__I2C2_SDA                          0x01A8 0x04F0 0x07B4 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__ECSPI5_RDY                        0x01A8 0x04F0 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__ESAI_TX5_RX0                      0x01A8 0x04F0 0x07A4 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA2__CSI1_DATA_20                      0x01A8 0x04F0 0x06EC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26                       0x01A8 0x04F0 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__WEIM_DATA_12                      0x01A8 0x04F0 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA2__SIM_M_HADDR_5                     0x01A8 0x04F0 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3                    0x01AC 0x04F4 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__I2C2_SCL                          0x01AC 0x04F4 0x07B0 0x1 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__ECSPI5_SS3                        0x01AC 0x04F4 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__ESAI_TX_FS                        0x01AC 0x04F4 0x077C 0x3 0x2
+#define MX6SX_PAD_QSPI1B_DATA3__CSI1_DATA_19                      0x01AC 0x04F4 0x06E8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27                       0x01AC 0x04F4 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__WEIM_DATA_11                      0x01AC 0x04F4 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DATA3__SIM_M_HADDR_2                     0x01AC 0x04F4 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_DQS__QSPI1_B_DQS                         0x01B0 0x04F8 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CAN1_TX                             0x01B0 0x04F8 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_DQS__CANFD_TX1                           0x01B0 0x04F8 0x0000 0x2 0x0
+#define MX6SX_PAD_QSPI1B_DQS__ECSPI5_SS0                          0x01B0 0x04F8 0x075C 0x3 0x1
+#define MX6SX_PAD_QSPI1B_DQS__CSI1_DATA_23                        0x01B0 0x04F8 0x06F8 0x4 0x1
+#define MX6SX_PAD_QSPI1B_DQS__GPIO4_IO_28                         0x01B0 0x04F8 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15                        0x01B0 0x04F8 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15                      0x01B0 0x04F8 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK                       0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX                           0x01B4 0x04FC 0x0840 0x1 0x4
+#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX                           0x01B4 0x04FC 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK                        0x01B4 0x04FC 0x0730 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK                     0x01B4 0x04FC 0x0780 0x3 0x2
+#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16                       0x01B4 0x04FC 0x06DC 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SCLK__GPIO4_IO_29                        0x01B4 0x04FC 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8                        0x01B4 0x04FC 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11                     0x01B4 0x04FC 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B                     0x01B8 0x0500 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX                          0x01B8 0x0500 0x0840 0x1 0x5
+#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX                          0x01B8 0x0500 0x0000 0x1 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0                        0x01B8 0x0500 0x073C 0x2 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK                    0x01B8 0x0500 0x0784 0x3 0x3
+#define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17                      0x01B8 0x0500 0x06E0 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS0_B__GPIO4_IO_30                       0x01B8 0x0500 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__WEIM_DATA_9                       0x01B8 0x0500 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10                    0x01B8 0x0500 0x0000 0x7 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B                     0x01BC 0x0504 0x0000 0x0 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX                           0x01BC 0x0504 0x0690 0x1 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2                         0x01BC 0x0504 0x0698 0x2 0x2
+#define MX6SX_PAD_QSPI1B_SS1_B__ECSPI5_SCLK                       0x01BC 0x0504 0x0750 0x3 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__CSI1_DATA_18                      0x01BC 0x0504 0x06E4 0x4 0x1
+#define MX6SX_PAD_QSPI1B_SS1_B__GPIO4_IO_31                       0x01BC 0x0504 0x0000 0x5 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__WEIM_DATA_10                      0x01BC 0x0504 0x0000 0x6 0x0
+#define MX6SX_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14                    0x01BC 0x0504 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0                     0x01C0 0x0508 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD0__GPIO5_IO_0                          0x01C0 0x0508 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD0__CSI2_DATA_10                        0x01C0 0x0508 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD0__ANATOP_TESTI_0                      0x01C0 0x0508 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER              0x01C0 0x0508 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0                   0x01C0 0x0508 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1                     0x01C4 0x050C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD1__GPIO5_IO_1                          0x01C4 0x050C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD1__CSI2_DATA_11                        0x01C4 0x050C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD1__ANATOP_TESTI_1                      0x01C4 0x050C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER               0x01C4 0x050C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1                   0x01C4 0x050C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2                     0x01C8 0x0510 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD2__GPIO5_IO_2                          0x01C8 0x0510 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD2__CSI2_DATA_12                        0x01C8 0x0510 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD2__ANATOP_TESTI_2                      0x01C8 0x0510 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER               0x01C8 0x0510 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2                   0x01C8 0x0510 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3                     0x01CC 0x0514 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RD3__GPIO5_IO_3                          0x01CC 0x0514 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RD3__CSI2_DATA_13                        0x01CC 0x0514 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RD3__ANATOP_TESTI_3                      0x01CC 0x0514 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER               0x01CC 0x0514 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3                   0x01CC 0x0514 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN                      0x01D0 0x0518 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__GPIO5_IO_4                       0x01D0 0x0518 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__CSI2_DATA_14                     0x01D0 0x0518 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0                   0x01D0 0x0518 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER            0x01D0 0x0518 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4                0x01D0 0x0518 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK                        0x01D4 0x051C 0x0768 0x0 0x1
+#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER                         0x01D4 0x051C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_RXC__GPIO5_IO_5                          0x01D4 0x051C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_RXC__CSI2_DATA_15                        0x01D4 0x051C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_RXC__ANATOP_TESTO_1                      0x01D4 0x051C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER               0x01D4 0x051C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5                   0x01D4 0x051C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0                     0x01D8 0x0520 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD0__SAI2_RX_SYNC                        0x01D8 0x0520 0x0810 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD0__GPIO5_IO_6                          0x01D8 0x0520 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD0__CSI2_DATA_16                        0x01D8 0x0520 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD0__ANATOP_TESTO_2                      0x01D8 0x0520 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER               0x01D8 0x0520 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6                   0x01D8 0x0520 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1                     0x01DC 0x0524 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD1__SAI2_RX_BCLK                        0x01DC 0x0524 0x0808 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD1__GPIO5_IO_7                          0x01DC 0x0524 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD1__CSI2_DATA_17                        0x01DC 0x0524 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD1__ANATOP_TESTO_3                      0x01DC 0x0524 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER               0x01DC 0x0524 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7                   0x01DC 0x0524 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2                     0x01E0 0x0528 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD2__SAI2_TX_SYNC                        0x01E0 0x0528 0x0818 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD2__GPIO5_IO_8                          0x01E0 0x0528 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD2__CSI2_DATA_18                        0x01E0 0x0528 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD2__ANATOP_TESTO_4                      0x01E0 0x0528 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER               0x01E0 0x0528 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8                   0x01E0 0x0528 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3                     0x01E4 0x052C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TD3__SAI2_TX_BCLK                        0x01E4 0x052C 0x0814 0x2 0x1
+#define MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9                          0x01E4 0x052C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TD3__CSI2_DATA_19                        0x01E4 0x052C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TD3__ANATOP_TESTO_5                      0x01E4 0x052C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER               0x01E4 0x052C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9                   0x01E4 0x052C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN                      0x01E8 0x0530 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0                   0x01E8 0x0530 0x080C 0x2 0x1
+#define MX6SX_PAD_RGMII1_TX_CTL__GPIO5_IO_10                      0x01E8 0x0530 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__CSI2_DATA_0                      0x01E8 0x0530 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6                   0x01E8 0x0530 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER             0x01E8 0x0530 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10               0x01E8 0x0530 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC                     0x01EC 0x0534 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII1_TXC__ENET1_TX_ER                         0x01EC 0x0534 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII1_TXC__SAI2_TX_DATA_0                      0x01EC 0x0534 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII1_TXC__GPIO5_IO_11                         0x01EC 0x0534 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII1_TXC__CSI2_DATA_1                         0x01EC 0x0534 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII1_TXC__ANATOP_TESTO_7                      0x01EC 0x0534 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER                0x01EC 0x0534 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11                  0x01EC 0x0534 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0                     0x01F0 0x0538 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD0__PWM4_OUT                            0x01F0 0x0538 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD0__GPIO5_IO_12                         0x01F0 0x0538 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD0__CSI2_DATA_2                         0x01F0 0x0538 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD0__ANATOP_TESTO_8                      0x01F0 0x0538 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD0__VDEC_DEBUG_18                       0x01F0 0x0538 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12                  0x01F0 0x0538 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1                     0x01F4 0x053C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD1__PWM3_OUT                            0x01F4 0x053C 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD1__GPIO5_IO_13                         0x01F4 0x053C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD1__CSI2_DATA_3                         0x01F4 0x053C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD1__ANATOP_TESTO_9                      0x01F4 0x053C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD1__VDEC_DEBUG_19                       0x01F4 0x053C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13                  0x01F4 0x053C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2                     0x01F8 0x0540 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD2__PWM2_OUT                            0x01F8 0x0540 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD2__GPIO5_IO_14                         0x01F8 0x0540 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD2__CSI2_DATA_4                         0x01F8 0x0540 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD2__ANATOP_TESTO_10                     0x01F8 0x0540 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD2__VDEC_DEBUG_20                       0x01F8 0x0540 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14                  0x01F8 0x0540 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3                     0x01FC 0x0544 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RD3__PWM1_OUT                            0x01FC 0x0544 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_RD3__GPIO5_IO_15                         0x01FC 0x0544 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RD3__CSI2_DATA_5                         0x01FC 0x0544 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RD3__ANATOP_TESTO_11                     0x01FC 0x0544 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RD3__VDEC_DEBUG_21                       0x01FC 0x0544 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15                  0x01FC 0x0544 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN                      0x0200 0x0548 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__GPIO5_IO_16                      0x0200 0x0548 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__CSI2_DATA_6                      0x0200 0x0548 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12                  0x0200 0x0548 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22                    0x0200 0x0548 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16               0x0200 0x0548 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK                        0x0204 0x054C 0x0774 0x0 0x1
+#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_ER                         0x0204 0x054C 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_RXC__GPIO5_IO_17                         0x0204 0x054C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_RXC__CSI2_DATA_7                         0x0204 0x054C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_RXC__ANATOP_TESTO_13                     0x0204 0x054C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_RXC__VDEC_DEBUG_23                       0x0204 0x054C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17                  0x0204 0x054C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0                     0x0208 0x0550 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD0__SAI1_RX_SYNC                        0x0208 0x0550 0x07FC 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD0__PWM8_OUT                            0x0208 0x0550 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD0__GPIO5_IO_18                         0x0208 0x0550 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD0__CSI2_DATA_8                         0x0208 0x0550 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD0__ANATOP_TESTO_14                     0x0208 0x0550 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD0__VDEC_DEBUG_24                       0x0208 0x0550 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18                  0x0208 0x0550 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1                     0x020C 0x0554 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD1__SAI1_RX_BCLK                        0x020C 0x0554 0x07F4 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD1__PWM7_OUT                            0x020C 0x0554 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD1__GPIO5_IO_19                         0x020C 0x0554 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD1__CSI2_DATA_9                         0x020C 0x0554 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD1__ANATOP_TESTO_15                     0x020C 0x0554 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD1__VDEC_DEBUG_25                       0x020C 0x0554 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19                  0x020C 0x0554 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2                     0x0210 0x0558 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD2__SAI1_TX_SYNC                        0x0210 0x0558 0x0804 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD2__PWM6_OUT                            0x0210 0x0558 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD2__GPIO5_IO_20                         0x0210 0x0558 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD2__CSI2_VSYNC                          0x0210 0x0558 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD2__SJC_FAIL                            0x0210 0x0558 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD2__VDEC_DEBUG_26                       0x0210 0x0558 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20                  0x0210 0x0558 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3                     0x0214 0x055C 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TD3__SAI1_TX_BCLK                        0x0214 0x055C 0x0800 0x2 0x1
+#define MX6SX_PAD_RGMII2_TD3__PWM5_OUT                            0x0214 0x055C 0x0000 0x3 0x0
+#define MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21                         0x0214 0x055C 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TD3__CSI2_HSYNC                          0x0214 0x055C 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TD3__SJC_JTAG_ACT                        0x0214 0x055C 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TD3__VDEC_DEBUG_27                       0x0214 0x055C 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21                  0x0214 0x055C 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN                      0x0218 0x0560 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0                   0x0218 0x0560 0x07F8 0x2 0x1
+#define MX6SX_PAD_RGMII2_TX_CTL__GPIO5_IO_22                      0x0218 0x0560 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__CSI2_FIELD                       0x0218 0x0560 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__SJC_DE_B                         0x0218 0x0560 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28                    0x0218 0x0560 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22               0x0218 0x0560 0x0000 0x9 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC                     0x021C 0x0564 0x0000 0x0 0x0
+#define MX6SX_PAD_RGMII2_TXC__ENET2_TX_ER                         0x021C 0x0564 0x0000 0x1 0x0
+#define MX6SX_PAD_RGMII2_TXC__SAI1_TX_DATA_0                      0x021C 0x0564 0x0000 0x2 0x0
+#define MX6SX_PAD_RGMII2_TXC__GPIO5_IO_23                         0x021C 0x0564 0x0000 0x5 0x0
+#define MX6SX_PAD_RGMII2_TXC__CSI2_PIXCLK                         0x021C 0x0564 0x0000 0x6 0x0
+#define MX6SX_PAD_RGMII2_TXC__SJC_DONE                            0x021C 0x0564 0x0000 0x7 0x0
+#define MX6SX_PAD_RGMII2_TXC__VDEC_DEBUG_29                       0x021C 0x0564 0x0000 0x8 0x0
+#define MX6SX_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23                  0x021C 0x0564 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CLK__USDHC1_CLK                             0x0220 0x0568 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CLK__AUDMUX_AUD5_RXFS                       0x0220 0x0568 0x0668 0x1 0x1
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_B                           0x0220 0x0568 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CLK__GPT_CLK                                0x0220 0x0568 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB                   0x0220 0x0568 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CLK__GPIO6_IO_0                             0x0220 0x0568 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT                  0x0220 0x0568 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CLK__CCM_OUT1                               0x0220 0x0568 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CLK__VADC_ADC_PROC_CLK                      0x0220 0x0568 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CLK__MMDC_DEBUG_45                          0x0220 0x0568 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_CMD__USDHC1_CMD                             0x0224 0x056C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_CMD__AUDMUX_AUD5_RXC                        0x0224 0x056C 0x0664 0x1 0x1
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_B                           0x0224 0x056C 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_CMD__GPT_COMPARE1                           0x0224 0x056C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB                   0x0224 0x056C 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_CMD__GPIO6_IO_1                             0x0224 0x056C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_CMD__ENET2_1588_EVENT1_IN                   0x0224 0x056C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_CMD__CCM_CLKO1                              0x0224 0x056C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_CMD__VADC_EXT_SYSCLK                        0x0224 0x056C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_CMD__MMDC_DEBUG_46                          0x0224 0x056C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA0__USDHC1_DATA0                         0x0228 0x0570 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD                      0x0228 0x0570 0x065C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS             0x0228 0x0570 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1                         0x0228 0x0570 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA0__UART2_RX                             0x0228 0x0570 0x0838 0x4 0x2
+#define MX6SX_PAD_SD1_DATA0__UART2_TX                             0x0228 0x0570 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2                           0x0228 0x0570 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN                 0x0228 0x0570 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA0__CCM_OUT2                             0x0228 0x0570 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA0__VADC_CLAMP_UP                        0x0228 0x0570 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA0__MMDC_DEBUG_48                        0x0228 0x0570 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA1__USDHC1_DATA1                         0x022C 0x0574 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC                      0x022C 0x0574 0x066C 0x1 0x1
+#define MX6SX_PAD_SD1_DATA1__PWM4_OUT                             0x022C 0x0574 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2                         0x022C 0x0574 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA1__UART2_RX                             0x022C 0x0574 0x0838 0x4 0x3
+#define MX6SX_PAD_SD1_DATA1__UART2_TX                             0x022C 0x0574 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3                           0x022C 0x0574 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT                0x022C 0x0574 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA1__CCM_CLKO2                            0x022C 0x0574 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA1__VADC_CLAMP_DOWN                      0x022C 0x0574 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA1__MMDC_DEBUG_47                        0x022C 0x0574 0x0000 0x9 0x0
+#define MX6SX_PAD_SD1_DATA2__USDHC1_DATA2                         0x0230 0x0578 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS                     0x0230 0x0578 0x0670 0x1 0x1
+#define MX6SX_PAD_SD1_DATA2__PWM3_OUT                             0x0230 0x0578 0x0000 0x2 0x0
+#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2                         0x0230 0x0578 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B                          0x0230 0x0578 0x0000 0x4 0x0
+#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4                           0x0230 0x0578 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY                           0x0230 0x0578 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA2__CCM_OUT0                             0x0230 0x0578 0x0000 0x7 0x0
+#define MX6SX_PAD_SD1_DATA2__VADC_EXT_PD_N                        0x0230 0x0578 0x0000 0x8 0x0
+#define MX6SX_PAD_SD1_DATA3__USDHC1_DATA3                         0x0234 0x057C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD                      0x0234 0x057C 0x0660 0x1 0x1
+#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD                      0x0234 0x057C 0x065C 0x2 0x2
+#define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3                         0x0234 0x057C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B                          0x0234 0x057C 0x0834 0x4 0x3
+#define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5                           0x0234 0x057C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1                           0x0234 0x057C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY                         0x0234 0x057C 0x069C 0x7 0x2
+#define MX6SX_PAD_SD1_DATA3__VADC_RST_N                           0x0234 0x057C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__USDHC2_CLK                             0x0238 0x0580 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CLK__AUDMUX_AUD6_RXFS                       0x0238 0x0580 0x0680 0x1 0x2
+#define MX6SX_PAD_SD2_CLK__KPP_COL_5                              0x0238 0x0580 0x07C8 0x2 0x1
+#define MX6SX_PAD_SD2_CLK__ECSPI4_SCLK                            0x0238 0x0580 0x0740 0x3 0x1
+#define MX6SX_PAD_SD2_CLK__MLB_SIG                                0x0238 0x0580 0x07F0 0x4 0x2
+#define MX6SX_PAD_SD2_CLK__GPIO6_IO_6                             0x0238 0x0580 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CLK__MQS_RIGHT                              0x0238 0x0580 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CLK__WDOG1_WDOG_ANY                         0x0238 0x0580 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5                   0x0238 0x0580 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CLK__MMDC_DEBUG_29                          0x0238 0x0580 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_CMD__USDHC2_CMD                             0x023C 0x0584 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_CMD__AUDMUX_AUD6_RXC                        0x023C 0x0584 0x067C 0x1 0x2
+#define MX6SX_PAD_SD2_CMD__KPP_ROW_5                              0x023C 0x0584 0x07D4 0x2 0x1
+#define MX6SX_PAD_SD2_CMD__ECSPI4_MOSI                            0x023C 0x0584 0x0748 0x3 0x1
+#define MX6SX_PAD_SD2_CMD__MLB_CLK                                0x023C 0x0584 0x07E8 0x4 0x2
+#define MX6SX_PAD_SD2_CMD__GPIO6_IO_7                             0x023C 0x0584 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_CMD__MQS_LEFT                               0x023C 0x0584 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_CMD__WDOG3_WDOG_B                           0x023C 0x0584 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4                   0x023C 0x0584 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_CMD__MMDC_DEBUG_30                          0x023C 0x0584 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA0__USDHC2_DATA0                         0x0240 0x0588 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA0__AUDMUX_AUD6_RXD                      0x0240 0x0588 0x0674 0x1 0x2
+#define MX6SX_PAD_SD2_DATA0__KPP_ROW_7                            0x0240 0x0588 0x07DC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA0__PWM1_OUT                             0x0240 0x0588 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA0__I2C4_SDA                             0x0240 0x0588 0x07C4 0x4 0x3
+#define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8                           0x0240 0x0588 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3                           0x0240 0x0588 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA0__UART4_RX                             0x0240 0x0588 0x0848 0x7 0x4
+#define MX6SX_PAD_SD2_DATA0__UART4_TX                             0x0240 0x0588 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0                 0x0240 0x0588 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50                        0x0240 0x0588 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1                         0x0244 0x058C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA1__AUDMUX_AUD6_TXC                      0x0244 0x058C 0x0684 0x1 0x2
+#define MX6SX_PAD_SD2_DATA1__KPP_COL_7                            0x0244 0x058C 0x07D0 0x2 0x1
+#define MX6SX_PAD_SD2_DATA1__PWM2_OUT                             0x0244 0x058C 0x0000 0x3 0x0
+#define MX6SX_PAD_SD2_DATA1__I2C4_SCL                             0x0244 0x058C 0x07C0 0x4 0x3
+#define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9                           0x0244 0x058C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2                           0x0244 0x058C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA1__UART4_RX                             0x0244 0x058C 0x0848 0x7 0x5
+#define MX6SX_PAD_SD2_DATA1__UART4_TX                             0x0244 0x058C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1                 0x0244 0x058C 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49                        0x0244 0x058C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2                         0x0248 0x0590 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS                     0x0248 0x0590 0x0688 0x1 0x2
+#define MX6SX_PAD_SD2_DATA2__KPP_ROW_6                            0x0248 0x0590 0x07D8 0x2 0x1
+#define MX6SX_PAD_SD2_DATA2__ECSPI4_SS0                           0x0248 0x0590 0x074C 0x3 0x1
+#define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0                     0x0248 0x0590 0x081C 0x4 0x2
+#define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10                          0x0248 0x0590 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA2__SPDIF_OUT                            0x0248 0x0590 0x0000 0x6 0x0
+#define MX6SX_PAD_SD2_DATA2__UART6_RX                             0x0248 0x0590 0x0858 0x7 0x4
+#define MX6SX_PAD_SD2_DATA2__UART6_TX                             0x0248 0x0590 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2                 0x0248 0x0590 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32                        0x0248 0x0590 0x0000 0x9 0x0
+#define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3                         0x024C 0x0594 0x0000 0x0 0x0
+#define MX6SX_PAD_SD2_DATA3__AUDMUX_AUD6_TXD                      0x024C 0x0594 0x0678 0x1 0x2
+#define MX6SX_PAD_SD2_DATA3__KPP_COL_6                            0x024C 0x0594 0x07CC 0x2 0x1
+#define MX6SX_PAD_SD2_DATA3__ECSPI4_MISO                          0x024C 0x0594 0x0744 0x3 0x1
+#define MX6SX_PAD_SD2_DATA3__MLB_DATA                             0x024C 0x0594 0x07EC 0x4 0x2
+#define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11                          0x024C 0x0594 0x0000 0x5 0x0
+#define MX6SX_PAD_SD2_DATA3__SPDIF_IN                             0x024C 0x0594 0x0824 0x6 0x4
+#define MX6SX_PAD_SD2_DATA3__UART6_RX                             0x024C 0x0594 0x0858 0x7 0x5
+#define MX6SX_PAD_SD2_DATA3__UART6_TX                             0x024C 0x0594 0x0000 0x7 0x0
+#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3                 0x024C 0x0594 0x0000 0x8 0x0
+#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31                        0x024C 0x0594 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CLK__USDHC3_CLK                             0x0250 0x0598 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CLK__UART4_CTS_B                            0x0250 0x0598 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK                            0x0250 0x0598 0x0740 0x2 0x0
+#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS                       0x0250 0x0598 0x0680 0x3 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC                           0x0250 0x0598 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_CLK__GPIO7_IO_0                             0x0250 0x0598 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CLK__LCDIF2_BUSY                            0x0250 0x0598 0x07E4 0x6 0x0
+#define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29                         0x0250 0x0598 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5             0x0250 0x0598 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_CMD__USDHC3_CMD                             0x0254 0x059C 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_RX                               0x0254 0x059C 0x0848 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__UART4_TX                               0x0254 0x059C 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI                            0x0254 0x059C 0x0748 0x2 0x0
+#define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC                        0x0254 0x059C 0x067C 0x3 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC                           0x0254 0x059C 0x07E4 0x4 0x1
+#define MX6SX_PAD_SD3_CMD__GPIO7_IO_1                             0x0254 0x059C 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_CMD__LCDIF2_RS                              0x0254 0x059C 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_CMD__TPSMP_HDATA_28                         0x0254 0x059C 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4             0x0254 0x059C 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA0__USDHC3_DATA0                         0x0258 0x05A0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA0__I2C4_SCL                             0x0258 0x05A0 0x07C0 0x1 0x0
+#define MX6SX_PAD_SD3_DATA0__ECSPI2_SS1                           0x0258 0x05A0 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA0__AUDMUX_AUD6_RXD                      0x0258 0x05A0 0x0674 0x3 0x0
+#define MX6SX_PAD_SD3_DATA0__LCDIF2_DATA_1                        0x0258 0x05A0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA0__GPIO7_IO_2                           0x0258 0x05A0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA0__DCIC1_OUT                            0x0258 0x05A0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA0__TPSMP_HDATA_30                       0x0258 0x05A0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA0__GPU_DEBUG_0                          0x0258 0x05A0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0           0x0258 0x05A0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA1__USDHC3_DATA1                         0x025C 0x05A4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA1__I2C4_SDA                             0x025C 0x05A4 0x07C4 0x1 0x0
+#define MX6SX_PAD_SD3_DATA1__ECSPI2_SS2                           0x025C 0x05A4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA1__AUDMUX_AUD6_TXC                      0x025C 0x05A4 0x0684 0x3 0x0
+#define MX6SX_PAD_SD3_DATA1__LCDIF2_DATA_0                        0x025C 0x05A4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA1__GPIO7_IO_3                           0x025C 0x05A4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA1__DCIC2_OUT                            0x025C 0x05A4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA1__TPSMP_HDATA_31                       0x025C 0x05A4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1                          0x025C 0x05A4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1           0x025C 0x05A4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2                         0x0260 0x05A8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B                          0x0260 0x05A8 0x0844 0x1 0x1
+#define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0                           0x0260 0x05A8 0x074C 0x2 0x0
+#define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS                     0x0260 0x05A8 0x0688 0x3 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK                           0x0260 0x05A8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA2__GPIO7_IO_4                           0x0260 0x05A8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA2__LCDIF2_WR_RWN                        0x0260 0x05A8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA2__TPSMP_HDATA_26                       0x0260 0x05A8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2                          0x0260 0x05A8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2           0x0260 0x05A8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3                         0x0264 0x05AC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA3__UART4_RX                             0x0264 0x05AC 0x0848 0x1 0x1
+#define MX6SX_PAD_SD3_DATA3__UART4_TX                             0x0264 0x05AC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO                          0x0264 0x05AC 0x0744 0x2 0x0
+#define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD                      0x0264 0x05AC 0x0678 0x3 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE                        0x0264 0x05AC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA3__GPIO7_IO_5                           0x0264 0x05AC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA3__LCDIF2_RD_E                          0x0264 0x05AC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA3__TPSMP_HDATA_27                       0x0264 0x05AC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA3__GPU_DEBUG_3                          0x0264 0x05AC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3           0x0264 0x05AC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4                         0x0268 0x05B0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA4__CAN2_RX                              0x0268 0x05B0 0x0690 0x1 0x0
+#define MX6SX_PAD_SD3_DATA4__CANFD_RX2                            0x0268 0x05B0 0x0698 0x2 0x0
+#define MX6SX_PAD_SD3_DATA4__UART3_RX                             0x0268 0x05B0 0x0840 0x3 0x2
+#define MX6SX_PAD_SD3_DATA4__UART3_TX                             0x0268 0x05B0 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3                        0x0268 0x05B0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6                           0x0268 0x05B0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN                 0x0268 0x05B0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA4__TPSMP_HTRANS_1                       0x0268 0x05B0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA4__GPU_DEBUG_4                          0x0268 0x05B0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0              0x0268 0x05B0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5                         0x026C 0x05B4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA5__CAN1_TX                              0x026C 0x05B4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA5__CANFD_TX1                            0x026C 0x05B4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA5__UART3_RX                             0x026C 0x05B4 0x0840 0x3 0x3
+#define MX6SX_PAD_SD3_DATA5__UART3_TX                             0x026C 0x05B4 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2                        0x026C 0x05B4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7                           0x026C 0x05B4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT                0x026C 0x05B4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA5__SIM_M_HWRITE                         0x026C 0x05B4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA5__GPU_DEBUG_5                          0x026C 0x05B4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1              0x026C 0x05B4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6                         0x0270 0x05B8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA6__CAN2_TX                              0x0270 0x05B8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD3_DATA6__CANFD_TX2                            0x0270 0x05B8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B                          0x0270 0x05B8 0x083C 0x3 0x2
+#define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4                        0x0270 0x05B8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8                           0x0270 0x05B8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT                0x0270 0x05B8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA6__TPSMP_HTRANS_0                       0x0270 0x05B8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA6__GPU_DEBUG_7                          0x0270 0x05B8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7           0x0270 0x05B8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7                         0x0274 0x05BC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD3_DATA7__CAN1_RX                              0x0274 0x05BC 0x068C 0x1 0x0
+#define MX6SX_PAD_SD3_DATA7__CANFD_RX1                            0x0274 0x05BC 0x0694 0x2 0x0
+#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B                          0x0274 0x05BC 0x0000 0x3 0x0
+#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5                        0x0274 0x05BC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9                           0x0274 0x05BC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN                 0x0274 0x05BC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD3_DATA7__TPSMP_HDATA_DIR                      0x0274 0x05BC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD3_DATA7__GPU_DEBUG_6                          0x0274 0x05BC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2           0x0274 0x05BC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CLK__USDHC4_CLK                             0x0278 0x05C0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CLK__RAWNAND_DATA15                         0x0278 0x05C0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI2_MISO                            0x0278 0x05C0 0x0724 0x2 0x1
+#define MX6SX_PAD_SD4_CLK__AUDMUX_AUD3_RXFS                       0x0278 0x05C0 0x0638 0x3 0x0
+#define MX6SX_PAD_SD4_CLK__LCDIF2_DATA_13                         0x0278 0x05C0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CLK__GPIO6_IO_12                            0x0278 0x05C0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CLK__ECSPI3_SS2                             0x0278 0x05C0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CLK__TPSMP_HDATA_20                         0x0278 0x05C0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CLK__VDEC_DEBUG_12                          0x0278 0x05C0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL           0x0278 0x05C0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_CMD__USDHC4_CMD                             0x027C 0x05C4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_CMD__RAWNAND_DATA14                         0x027C 0x05C4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI2_MOSI                            0x027C 0x05C4 0x0728 0x2 0x1
+#define MX6SX_PAD_SD4_CMD__AUDMUX_AUD3_RXC                        0x027C 0x05C4 0x0634 0x3 0x0
+#define MX6SX_PAD_SD4_CMD__LCDIF2_DATA_14                         0x027C 0x05C4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_CMD__GPIO6_IO_13                            0x027C 0x05C4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_CMD__ECSPI3_SS1                             0x027C 0x05C4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_CMD__TPSMP_HDATA_19                         0x027C 0x05C4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_CMD__VDEC_DEBUG_11                          0x027C 0x05C4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN                    0x027C 0x05C4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA0__USDHC4_DATA0                         0x0280 0x05C8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA0__RAWNAND_DATA10                       0x0280 0x05C8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI2_SS0                           0x0280 0x05C8 0x072C 0x2 0x1
+#define MX6SX_PAD_SD4_DATA0__AUDMUX_AUD3_RXD                      0x0280 0x05C8 0x062C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA0__LCDIF2_DATA_12                       0x0280 0x05C8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA0__GPIO6_IO_14                          0x0280 0x05C8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA0__ECSPI3_SS3                           0x0280 0x05C8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA0__TPSMP_HDATA_21                       0x0280 0x05C8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA0__VDEC_DEBUG_13                        0x0280 0x05C8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA0__SDMA_DEBUG_MODE                      0x0280 0x05C8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA1__USDHC4_DATA1                         0x0284 0x05CC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA1__RAWNAND_DATA11                       0x0284 0x05CC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI2_SCLK                          0x0284 0x05CC 0x0720 0x2 0x1
+#define MX6SX_PAD_SD4_DATA1__AUDMUX_AUD3_TXC                      0x0284 0x05CC 0x063C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA1__LCDIF2_DATA_11                       0x0284 0x05CC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA1__GPIO6_IO_15                          0x0284 0x05CC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA1__ECSPI3_RDY                           0x0284 0x05CC 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA1__TPSMP_HDATA_22                       0x0284 0x05CC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA1__VDEC_DEBUG_14                        0x0284 0x05CC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR                 0x0284 0x05CC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA2__USDHC4_DATA2                         0x0288 0x05D0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA2__RAWNAND_DATA12                       0x0288 0x05D0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA2__I2C2_SDA                             0x0288 0x05D0 0x07B4 0x2 0x0
+#define MX6SX_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS                     0x0288 0x05D0 0x0640 0x3 0x0
+#define MX6SX_PAD_SD4_DATA2__LCDIF2_DATA_10                       0x0288 0x05D0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA2__GPIO6_IO_16                          0x0288 0x05D0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA2__ECSPI2_SS3                           0x0288 0x05D0 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA2__TPSMP_HDATA_23                       0x0288 0x05D0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA2__VDEC_DEBUG_15                        0x0288 0x05D0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB                   0x0288 0x05D0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA3__USDHC4_DATA3                         0x028C 0x05D4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA3__RAWNAND_DATA13                       0x028C 0x05D4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA3__I2C2_SCL                             0x028C 0x05D4 0x07B0 0x2 0x0
+#define MX6SX_PAD_SD4_DATA3__AUDMUX_AUD3_TXD                      0x028C 0x05D4 0x0630 0x3 0x0
+#define MX6SX_PAD_SD4_DATA3__LCDIF2_DATA_9                        0x028C 0x05D4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA3__GPIO6_IO_17                          0x028C 0x05D4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA3__ECSPI2_RDY                           0x028C 0x05D4 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA3__TPSMP_HDATA_24                       0x028C 0x05D4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA3__VDEC_DEBUG_16                        0x028C 0x05D4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS             0x028C 0x05D4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4                         0x0290 0x05D8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09                       0x0290 0x05D8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_RX                             0x0290 0x05D8 0x0850 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__UART5_TX                             0x0290 0x05D8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK                          0x0290 0x05D8 0x0730 0x3 0x0
+#define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8                        0x0290 0x05D8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18                          0x0290 0x05D8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA4__SPDIF_OUT                            0x0290 0x05D8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_DATA4__TPSMP_HDATA_16                       0x0290 0x05D8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA4__USB_OTG_HOST_MODE                    0x0290 0x05D8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE            0x0290 0x05D8 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5                         0x0294 0x05DC 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B                        0x0294 0x05DC 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA5__UART5_RX                             0x0294 0x05DC 0x0850 0x2 0x1
+#define MX6SX_PAD_SD4_DATA5__UART5_TX                             0x0294 0x05DC 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI                          0x0294 0x05DC 0x0738 0x3 0x0
+#define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7                        0x0294 0x05DC 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19                          0x0294 0x05DC 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA5__SPDIF_IN                             0x0294 0x05DC 0x0824 0x6 0x0
+#define MX6SX_PAD_SD4_DATA5__TPSMP_HDATA_17                       0x0294 0x05DC 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA5__VDEC_DEBUG_9                         0x0294 0x05DC 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0           0x0294 0x05DC 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6                         0x0298 0x05E0 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B                        0x0298 0x05E0 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B                          0x0298 0x05E0 0x084C 0x2 0x0
+#define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO                          0x0298 0x05E0 0x0734 0x3 0x0
+#define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6                        0x0298 0x05E0 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20                          0x0298 0x05E0 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA6__USDHC4_WP                            0x0298 0x05E0 0x0878 0x6 0x0
+#define MX6SX_PAD_SD4_DATA6__TPSMP_HDATA_18                       0x0298 0x05E0 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA6__VDEC_DEBUG_10                        0x0298 0x05E0 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1           0x0298 0x05E0 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7                         0x029C 0x05E4 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08                       0x029C 0x05E4 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B                          0x029C 0x05E4 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0                           0x029C 0x05E4 0x073C 0x3 0x0
+#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15                       0x029C 0x05E4 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21                          0x029C 0x05E4 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_DATA7__USDHC4_CD_B                          0x029C 0x05E4 0x0874 0x6 0x0
+#define MX6SX_PAD_SD4_DATA7__TPSMP_HDATA_15                       0x029C 0x05E4 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_DATA7__USB_OTG_PWR_WAKE                     0x029C 0x05E4 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_DATA7__SDMA_DEBUG_YIELD                     0x029C 0x05E4 0x0000 0x9 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B                     0x02A0 0x05E8 0x0000 0x0 0x0
+#define MX6SX_PAD_SD4_RESET_B__RAWNAND_DQS                        0x02A0 0x05E8 0x0000 0x1 0x0
+#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET                       0x02A0 0x05E8 0x0000 0x2 0x0
+#define MX6SX_PAD_SD4_RESET_B__AUDMUX_MCLK                        0x02A0 0x05E8 0x0000 0x3 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_RESET                       0x02A0 0x05E8 0x0000 0x4 0x0
+#define MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22                        0x02A0 0x05E8 0x0000 0x5 0x0
+#define MX6SX_PAD_SD4_RESET_B__LCDIF2_CS                          0x02A0 0x05E8 0x0000 0x6 0x0
+#define MX6SX_PAD_SD4_RESET_B__TPSMP_HDATA_25                     0x02A0 0x05E8 0x0000 0x7 0x0
+#define MX6SX_PAD_SD4_RESET_B__VDEC_DEBUG_17                      0x02A0 0x05E8 0x0000 0x8 0x0
+#define MX6SX_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2            0x02A0 0x05E8 0x0000 0x9 0x0
+#define MX6SX_PAD_USB_H_DATA__USB_H_DATA                          0x02A4 0x05EC 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_DATA__PWM2_OUT                            0x02A4 0x05EC 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_DATA__ANATOP_24M_OUT                      0x02A4 0x05EC 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_DATA__I2C4_SDA                            0x02A4 0x05EC 0x07C4 0x3 0x1
+#define MX6SX_PAD_USB_H_DATA__WDOG3_WDOG_B                        0x02A4 0x05EC 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_DATA__GPIO7_IO_10                         0x02A4 0x05EC 0x0000 0x5 0x0
+#define MX6SX_PAD_USB_H_STROBE__USB_H_STROBE                      0x02A8 0x05F0 0x0000 0x0 0x0
+#define MX6SX_PAD_USB_H_STROBE__PWM1_OUT                          0x02A8 0x05F0 0x0000 0x1 0x0
+#define MX6SX_PAD_USB_H_STROBE__ANATOP_32K_OUT                    0x02A8 0x05F0 0x0000 0x2 0x0
+#define MX6SX_PAD_USB_H_STROBE__I2C4_SCL                          0x02A8 0x05F0 0x07C0 0x3 0x1
+#define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB              0x02A8 0x05F0 0x0000 0x4 0x0
+#define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11                       0x02A8 0x05F0 0x0000 0x5 0x0
+
+#endif /* __DTS_IMX6SX_PINFUNC_H */
diff --git a/src/arm/imx6sx-sabreauto.dts b/src/arm/imx6sx-sabreauto.dts
new file mode 100644
index 000000000000..e3c0b63c2205
--- /dev/null
+++ b/src/arm/imx6sx-sabreauto.dts
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "imx6sx.dtsi"
+
+/ {
+	model = "Freescale i.MX6 SoloX Sabre Auto Board";
+	compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vcc_sd3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_vcc_sd3>;
+			regulator-name = "VCC_SD3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&vcc_sd3>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	enable-sdio-wakup;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6x-sabreauto {
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
+				MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x17059
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x10059
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x17059
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x17059
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x17059
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x17059
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x17059
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x17059
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x17059
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x17059
+				MX6SX_PAD_KEY_COL0__GPIO2_IO_10		0x17059 /* CD */
+				MX6SX_PAD_KEY_ROW0__GPIO2_IO_15		0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170b9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100b9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170b9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170b9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170b9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170b9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170b9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170b9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170b9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+			fsl,pins = <
+				MX6SX_PAD_SD3_CMD__USDHC3_CMD		0x170f9
+				MX6SX_PAD_SD3_CLK__USDHC3_CLK		0x100f9
+				MX6SX_PAD_SD3_DATA0__USDHC3_DATA0	0x170f9
+				MX6SX_PAD_SD3_DATA1__USDHC3_DATA1	0x170f9
+				MX6SX_PAD_SD3_DATA2__USDHC3_DATA2	0x170f9
+				MX6SX_PAD_SD3_DATA3__USDHC3_DATA3	0x170f9
+				MX6SX_PAD_SD3_DATA4__USDHC3_DATA4	0x170f9
+				MX6SX_PAD_SD3_DATA5__USDHC3_DATA5	0x170f9
+				MX6SX_PAD_SD3_DATA6__USDHC3_DATA6	0x170f9
+				MX6SX_PAD_SD3_DATA7__USDHC3_DATA7	0x170f9
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_CMD__USDHC4_CMD		0x17059
+				MX6SX_PAD_SD4_CLK__USDHC4_CLK		0x10059
+				MX6SX_PAD_SD4_DATA0__USDHC4_DATA0	0x17059
+				MX6SX_PAD_SD4_DATA1__USDHC4_DATA1	0x17059
+				MX6SX_PAD_SD4_DATA2__USDHC4_DATA2	0x17059
+				MX6SX_PAD_SD4_DATA3__USDHC4_DATA3	0x17059
+				MX6SX_PAD_SD4_DATA7__GPIO6_IO_21	0x17059 /* CD */
+				MX6SX_PAD_SD4_DATA6__GPIO6_IO_20	0x17059 /* WP */
+			>;
+		};
+
+		pinctrl_vcc_sd3: vccsd3grp {
+			fsl,pins = <
+				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
+			>;
+		};
+	};
+};
diff --git a/src/arm/imx6sx-sdb.dts b/src/arm/imx6sx-sdb.dts
index a3980d970590..32f07d6b4042 100644
--- a/src/arm/imx6sx-sdb.dts
+++ b/src/arm/imx6sx-sdb.dts
@@ -24,6 +24,13 @@
 		reg = <0x80000000 0x40000000>;
 	};
 
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -90,6 +97,38 @@
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 		};
+
+		reg_lcd_3v3: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "lcd-3v3";
+			gpio = <&gpio3 27 0>;
+			enable-active-high;
+		};
+
+		reg_peri_3v3: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_peri_3v3>;
+			regulator-name = "peri_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			regulator-always-on;
+		};
+
+		reg_enet_3v3: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet_3v3>;
+			regulator-name = "enet_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		};
 	};
 
 	sound {
@@ -118,7 +157,30 @@
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
+	phy-supply = <&reg_enet_3v3>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
 	status = "okay";
 };
 
@@ -251,6 +313,70 @@
 	};
 };
 
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	lcd-supply = <&reg_lcd_3v3>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33500000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <89>;
+				hfront-porch = <164>;
+				vback-porch = <23>;
+				vfront-porch = <10>;
+				hsync-len = <10>;
+				vsync-len = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&qspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi2>;
+	status = "okay";
+
+	flash0: s25fl128s@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl128s";
+		spi-max-frequency = <66000000>;
+	};
+
+	flash1: s25fl128s@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl128s";
+		spi-max-frequency = <66000000>;
+	};
+};
+
 &ssi2 {
 	status = "okay";
 };
@@ -341,6 +467,30 @@
 				MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2	0x3081
 				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
 				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
+				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
+			>;
+		};
+
+		pinctrl_enet_3v3: enet3v3grp {
+			fsl,pins = <
+				MX6SX_PAD_ENET2_COL__GPIO2_IO_6		0x80000000
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC	0xa0b9
+				MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0	0xa0b1
+				MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1	0xa0b1
+				MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2	0xa0b1
+				MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3	0xa0b1
+				MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN	0xa0b1
+				MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK	0x3081
+				MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0	0x3081
+				MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1	0x3081
+				MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2	0x3081
+				MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3	0x3081
+				MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN	0x3081
 			>;
 		};
 
@@ -365,6 +515,69 @@
 			>;
 		};
 
+		pinctrl_lcd: lcdgrp {
+			fsl,pins = <
+				MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0
+				MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0
+				MX6SX_PAD_LCD1_CLK__LCDIF1_CLK	0x4001b0b0
+				MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0
+				MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0
+				MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0
+				MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0
+			>;
+		};
+
+		pinctrl_peri_3v3: peri3v3grp {
+			fsl,pins = <
+				MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16	0x80000000
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp-1 {
+			fsl,pins = <
+				MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
+			>;
+		};
+
+		pinctrl_qspi2: qspi2grp {
+			fsl,pins = <
+				MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0     0x70f1
+				MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1  0x70f1
+				MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2    0x70f1
+				MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3    0x70f1
+				MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK        0x70f1
+				MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B       0x70f1
+				MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0   0x70f1
+				MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1   0x70f1
+				MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2     0x70f1
+				MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3     0x70f1
+				MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK     0x70f1
+				MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B    0x70f1
+			>;
+		};
+
 		pinctrl_vcc_sd3: vccsd3grp {
 			fsl,pins = <
 				MX6SX_PAD_KEY_COL1__GPIO2_IO_11		0x17059
diff --git a/src/arm/imx6sx.dtsi b/src/arm/imx6sx.dtsi
index f4b9da65bc0f..7a24fee1e7ae 100644
--- a/src/arm/imx6sx.dtsi
+++ b/src/arm/imx6sx.dtsi
@@ -298,6 +298,7 @@
 				};
 
 				ssi1: ssi@02028000 {
+					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
@@ -311,6 +312,7 @@
 				};
 
 				ssi2: ssi@0202c000 {
+					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -324,6 +326,7 @@
 				};
 
 				ssi3: ssi@02030000 {
+					#sound-dai-cells = <0>;
 					compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -418,7 +421,7 @@
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_GPT_BUS>,
-					 <&clks IMX6SX_CLK_GPT_SERIAL>;
+					 <&clks IMX6SX_CLK_GPT_3M>;
 				clock-names = "ipg", "per";
 			};
 
@@ -668,6 +671,12 @@
 					reg = <0x34 0x58>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 				};
+
+				snvs_poweroff: snvs-poweroff@38 {
+					compatible = "fsl,sec-v4.0-poweroff";
+					reg = <0x38 0x4>;
+					status = "disabled";
+				};
 			};
 
 			epit1: epit@020d0000 {
@@ -776,6 +785,8 @@
 					 <&clks IMX6SX_CLK_ENET_PTP>;
 				clock-names = "ipg", "ahb", "ptp",
 					      "enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<3>;
+				fsl,num-rx-queues=<3>;
 				status = "disabled";
                         };
 
@@ -872,7 +883,7 @@
 			};
 
 			fec2: ethernet@021b4000 {
-				compatible = "fsl,imx6sx-fec";
+				compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
 				reg = <0x021b4000 0x4000>;
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -1062,6 +1073,7 @@
 				};
 
 				lcdif1: lcdif@02220000 {
+					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
 					reg = <0x02220000 0x4000>;
 					interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
@@ -1072,6 +1084,7 @@
 				};
 
 				lcdif2: lcdif@02224000 {
+					compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
 					reg = <0x02224000 0x4000>;
 					interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
diff --git a/src/arm/integrator.dtsi b/src/arm/integrator.dtsi
new file mode 100644
index 000000000000..28e38f8c6b0f
--- /dev/null
+++ b/src/arm/integrator.dtsi
@@ -0,0 +1,132 @@
+/*
+ * SoC core Device Tree for the ARM Integrator platforms
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	core-module@10000000 {
+		compatible = "arm,core-module-integrator", "syscon";
+		reg = <0x10000000 0x200>;
+
+		/* Use core module LED to indicate CPU load */
+		led@0c.0 {
+			compatible = "register-bit-led";
+			offset = <0x0c>;
+			mask = <0x01>;
+			label = "integrator:core_module";
+			linux,default-trigger = "cpu0";
+			default-state = "on";
+		};
+	};
+
+	ebi@12000000 {
+		compatible = "arm,external-bus-interface";
+		reg = <0x12000000 0x100>;
+	};
+
+	timer@13000000 {
+		reg = <0x13000000 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <5>;
+	};
+
+	timer@13000100 {
+		reg = <0x13000100 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <6>;
+	};
+
+	timer@13000200 {
+		reg = <0x13000200 0x100>;
+		interrupt-parent = <&pic>;
+		interrupts = <7>;
+	};
+
+	pic@14000000 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x14000000 0x100>;
+		clear-mask = <0xffffffff>;
+	};
+
+	flash@24000000 {
+		compatible = "cfi-flash";
+		reg = <0x24000000 0x02000000>;
+	};
+
+	fpga {
+		compatible = "arm,amba-bus", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&pic>;
+
+		/*
+		 * These PrimeCells are in the same locations and using the
+		 * same interrupts in all Integrators, however the silicon
+		 * version deployed is different.
+		 */
+		rtc@15000000 {
+			reg = <0x15000000 0x1000>;
+			interrupts = <8>;
+		};
+
+		uart@16000000 {
+			reg = <0x16000000 0x1000>;
+			interrupts = <1>;
+		};
+
+		uart@17000000 {
+			reg = <0x17000000 0x1000>;
+			interrupts = <2>;
+		};
+
+		kmi@18000000 {
+			reg = <0x18000000 0x1000>;
+			interrupts = <3>;
+		};
+
+		kmi@19000000 {
+			reg = <0x19000000 0x1000>;
+			interrupts = <4>;
+		};
+
+		syscon {
+			/* Debug registers mapped as syscon */
+			compatible = "syscon";
+			reg = <0x1a000000 0x10>;
+
+			led@04.0 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x01>;
+				label = "integrator:green0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@04.1 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x02>;
+				label = "integrator:yellow";
+				default-state = "off";
+			};
+			led@04.2 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x04>;
+				label = "integrator:red";
+				default-state = "off";
+			};
+			led@04.3 {
+				compatible = "register-bit-led";
+				offset = <0x04>;
+				mask = <0x08>;
+				label = "integrator:green1";
+				default-state = "off";
+			};
+		};
+	};
+};
diff --git a/src/arm/integratorap.dts b/src/arm/integratorap.dts
new file mode 100644
index 000000000000..cf06e32ee108
--- /dev/null
+++ b/src/arm/integratorap.dts
@@ -0,0 +1,153 @@
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ */
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/AP";
+	compatible = "arm,integrator-ap";
+	dma-ranges = <0x80000000 0x0 0x80000000>;
+
+	aliases {
+		arm,timer-primary = &timer2;
+		arm,timer-secondary = &timer1;
+	};
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
+	};
+
+	/* 24 MHz chrystal on the core module */
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* The UART clock is 14.74 MHz divided by an ICS525 */
+	uartclk: uartclk@14.74M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <14745600>;
+	};
+
+	syscon {
+		compatible = "arm,integrator-ap-syscon";
+		reg = <0x11000000 0x100>;
+		interrupt-parent = <&pic>;
+		/* These are the logical module IRQs */
+		interrupts = <9>, <10>, <11>, <12>;
+	};
+
+	timer0: timer@13000000 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	timer1: timer@13000100 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	timer2: timer@13000200 {
+		compatible = "arm,integrator-timer";
+		clocks = <&xtal24mhz>;
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x003fffff>;
+	};
+
+	pci: pciv3@62000000 {
+		compatible = "v3,v360epc-pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x62000000 0x10000>;
+		interrupt-parent = <&pic>;
+		interrupts = <17>; /* Bus error IRQ */
+		ranges = <0x00000000 0 0x61000000 /* config space */
+			0x61000000 0 0x00100000 /* 16 MiB @ 61000000 */
+			0x01000000 0 0x0 /* I/O space */
+			0x60000000 0 0x00100000 /* 16 MiB @ 60000000 */
+			0x02000000 0 0x00000000 /* non-prefectable memory */
+			0x40000000 0 0x10000000 /* 256 MiB @ 40000000 */
+			0x42000000 0 0x10000000 /* prefetchable memory */
+			0x50000000 0 0x10000000>; /* 256 MiB @ 50000000 */
+		interrupt-map-mask = <0xf800 0 0 0x7>;
+		interrupt-map = <
+		/* IDSEL 9 */
+		0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+		0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+		0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+		0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+		/* IDSEL 10 */
+		0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+		0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+		0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+		0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+		/* IDSEL 11 */
+		0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+		0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+		0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+		0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+		/* IDSEL 12 */
+		0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+		0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+		0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+		0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+		>;
+	};
+
+	fpga {
+		/*
+		 * The Integator/AP predates the idea to have magic numbers
+		 * identifying the PrimeCell in hardware, thus we have to
+		 * supply these from the device tree.
+		 */
+		rtc: rtc@15000000 {
+			compatible = "arm,pl030", "arm,primecell";
+			arm,primecell-periphid = <0x00041030>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: uart@16000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: uart@17000000 {
+			compatible = "arm,pl010", "arm,primecell";
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		kmi0: kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			arm,primecell-periphid = <0x00041050>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+	};
+};
diff --git a/src/arm/integratorcp.dts b/src/arm/integratorcp.dts
new file mode 100644
index 000000000000..d43f15b4f79a
--- /dev/null
+++ b/src/arm/integratorcp.dts
@@ -0,0 +1,215 @@
+/*
+ * Device Tree for the ARM Integrator/CP platform
+ */
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/CP";
+	compatible = "arm,integrator-cp";
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
+	};
+
+	/*
+	 * The Integrator/CP overall clocking architecture can be found in
+	 * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
+	 * appear to illustrate the layout used in most configurations.
+	 */
+
+	/* The codec chrystal operates at 24.576 MHz */
+	xtal_codec: xtal24.576@24.576M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
+	aaci_bitclk: aaci_bitclk@12.288M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&xtal_codec>;
+	};
+
+	/* This is a 25MHz chrystal on the base board */
+	xtal25mhz: xtal25mhz@25M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
+	uartclk: uartclk@14.74M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <14745600>;
+	};
+
+	/* Actually sysclk I think */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	core-module@10000000 {
+		/* 24 MHz chrystal on the core module */
+		xtal24mhz: xtal24mhz@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		/*
+		 * External oscillator on the core module, usually used
+		 * to drive video circuitry. Driven from the 24MHz clock.
+		 */
+		auxosc: cm_aux_osc@25M {
+			#clock-cells = <0>;
+			compatible = "arm,integrator-cm-auxosc";
+			clocks = <&xtal24mhz>;
+		};
+
+		/* The KMI clock is the 24 MHz oscillator divided to 8MHz */
+		kmiclk: kmiclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <3>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+
+		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
+		timclk: timclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <24>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
+	syscon {
+		compatible = "arm,integrator-cp-syscon";
+		reg = <0xcb000000 0x100>;
+	};
+
+	timer0: timer@13000000 {
+		/* TIMER0 runs directly on the 25MHz chrystal */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&xtal25mhz>;
+	};
+
+	timer1: timer@13000100 {
+		/* TIMER1 runs @ 1MHz */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&timclk>;
+	};
+
+	timer2: timer@13000200 {
+		/* TIMER2 runs @ 1MHz */
+		compatible = "arm,integrator-cp-timer";
+		clocks = <&timclk>;
+	};
+
+	pic: pic@14000000 {
+		valid-mask = <0x1fc003ff>;
+	};
+
+	cic: cic@10000040 {
+		compatible = "arm,versatile-fpga-irq";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0x10000040 0x100>;
+		clear-mask = <0xffffffff>;
+		valid-mask = <0x00000007>;
+	};
+
+	/* The SIC is cascaded off IRQ 26 on the PIC */
+	sic: sic@ca000000 {
+		compatible = "arm,versatile-fpga-irq";
+		interrupt-parent = <&pic>;
+		interrupts = <26>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		reg = <0xca000000 0x100>;
+		clear-mask = <0x00000fff>;
+		valid-mask = <0x00000fff>;
+	};
+
+	ethernet@c8000000 {
+		compatible = "smsc,lan91c111";
+		reg = <0xc8000000 0x10>;
+		interrupt-parent = <&pic>;
+		interrupts = <27>;
+	};
+
+	fpga {
+		/*
+		 * These PrimeCells are at the same location and using
+		 * the same interrupts in all Integrators, but in the CP
+		 * slightly newer versions are deployed.
+		 */
+		rtc@15000000 {
+			compatible = "arm,pl031", "arm,primecell";
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart@16000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart@17000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		kmi@18000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi@19000000 {
+			compatible = "arm,pl050", "arm,primecell";
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		/*
+		 * These PrimeCells are only available on the Integrator/CP
+		 */
+		mmc@1c000000 {
+			compatible = "arm,pl180", "arm,primecell";
+			reg = <0x1c000000 0x1000>;
+			interrupts = <23 24>;
+			max-frequency = <515633>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+		};
+
+		aaci@1d000000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x1d000000 0x1000>;
+			interrupts = <25>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		clcd@c0000000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0xC0000000 0x1000>;
+			interrupts = <22>;
+			clocks = <&auxosc>, <&pclk>;
+			clock-names = "clcd", "apb_pclk";
+		};
+	};
+};
diff --git a/src/arm/k2e-clocks.dtsi b/src/arm/k2e-clocks.dtsi
new file mode 100644
index 000000000000..4773d6af66a0
--- /dev/null
+++ b/src/arm/k2e-clocks.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3a>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	clkusb1: clkusb1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb1";
+		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkhyperlink0: clkhyperlink0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clkpcie1: clkpcie1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie1";
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkxge: clkxge {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+};
diff --git a/src/arm/k2e-evm.dts b/src/arm/k2e-evm.dts
new file mode 100644
index 000000000000..560d62150ade
--- /dev/null
+++ b/src/arm/k2e-evm.dts
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "k2e.dtsi"
+
+/ {
+	compatible =  "ti,k2e-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Edison EVM";
+
+	soc {
+
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-sys";
+			};
+
+			refclkpass: refclkpass {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-pass";
+			};
+
+			refclkddr3a: refclkddr3a {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3a";
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x1FE80000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&mdio {
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/src/arm/k2e.dtsi b/src/arm/k2e.dtsi
new file mode 100644
index 000000000000..5fc14683d6df
--- /dev/null
+++ b/src/arm/k2e.dtsi
@@ -0,0 +1,138 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Edison soc device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	soc {
+		/include/ "k2e-clocks.dtsi"
+
+		usb: usb@2680000 {
+			interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			dwc3@2690000 {
+				interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
+		usb1_phy: usb_phy@2620750 {
+			compatible = "ti,keystone-usbphy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2620750 24>;
+			status = "disabled";
+		};
+
+		usb1: usb@25000000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x25000000 0x10000>;
+			clocks = <&clkusb1>;
+			clock-names = "usb";
+			interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			dma-coherent;
+			dma-ranges;
+			status = "disabled";
+
+			dwc3@25010000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x25010000 0x70000>;
+				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
+				usb-phy = <&usb1_phy>, <&usb1_phy>;
+			};
+		};
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
+
+		pcie@21020000 {
+			compatible = "ti,keystone-pcie","snps,dw-pcie";
+			clocks = <&clkpcie1>;
+			clock-names = "pcie";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg =  <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
+			ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
+				0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
+
+			device_type = "pci";
+			num-lanes = <2>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
+					<0 0 0 2 &pcie_intc1 1>, /* INT B */
+					<0 0 0 3 &pcie_intc1 2>, /* INT C */
+					<0 0 0 4 &pcie_intc1 3>; /* INT D */
+
+			pcie_msi_intc1: msi-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 379 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 380 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 381 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 382 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 383 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 384 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			pcie_intc1: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+	};
+};
+
+&mdio {
+	reg = <0x24200f00 0x100>;
+};
diff --git a/src/arm/k2hk-clocks.dtsi b/src/arm/k2hk-clocks.dtsi
new file mode 100644
index 000000000000..d5adee3c0067
--- /dev/null
+++ b/src/arm/k2hk-clocks.dtsi
@@ -0,0 +1,426 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking SoC clock nodes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkarm>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkpass>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3a>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	ddr3bpllclk: ddr3bpllclk@2620368 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkddr3b>;
+		clock-output-names = "ddr-3b-pll-clk";
+		reg = <0x02620368 4>;
+		reg-names = "control";
+	};
+
+	clktsip: clktsip {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "tsip";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clksrio: clksrio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso13>;
+		clock-output-names = "srio";
+		reg = <0x0235002c 0xb00>, <0x02350010 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkhyperlink0: clkhyperlink0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-0";
+		reg = <0x02350030 0xb00>, <0x02350014 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <5>;
+	};
+
+	clkgem1: clkgem1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clkgem4: clkgem4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem4";
+		reg = <0x0235004c 0xb00>, <0x02350030 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <12>;
+	};
+
+	clkgem5: clkgem5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem5";
+		reg = <0x02350050 0xb00>, <0x02350034 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <13>;
+	};
+
+	clkgem6: clkgem6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem6";
+		reg = <0x02350054 0xb00>, <0x02350038 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <14>;
+	};
+
+	clkgem7: clkgem7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem7";
+		reg = <0x02350058 0xb00>, <0x0235003c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <15>;
+	};
+
+	clkddr31: clkddr31 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "ddr3-1";
+		reg = <0x02350060 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clktac: clktac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac01: clkrac01 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-01";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac23: clkrac23 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac-23";
+		reg = <0x0235006c 0xb00>, <0x02350048 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc1: clkfftc1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x02350074 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkfftc2: clkfftc2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-2";
+		reg = <0x02350078 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc3: clkfftc3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-3";
+		reg = <0x0235007c 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc4: clkfftc4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-4";
+		reg = <0x02350080 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkfftc5: clkfftc5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-5";
+		reg = <0x02350084 0xb00>, <0x02350050 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <20>;
+	};
+
+	clkaif: clkaif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "aif";
+		reg = <0x02350088 0xb00>, <0x02350054 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350090 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d2: clktcp3d2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-2";
+		reg = <0x02350094 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clktcp3d3: clktcp3d3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-3";
+		reg = <0x02350098 0xb00>, <0x0235005c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp4: clkvcp4 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-4";
+		reg = <0x023500ac 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp5: clkvcp5 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-5";
+		reg = <0x023500b0 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp6: clkvcp6 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-6";
+		reg = <0x023500b4 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkvcp7: clkvcp7 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-7";
+		reg = <0x023500b8 0xb00>, <0x02350064 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <25>;
+	};
+
+	clkbcp: clkbcp {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdxb: clkdxb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dxb";
+		reg = <0x023500c0 0xb00>, <0x0235006c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkhyperlink1: clkhyperlink1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "hyperlink-1";
+		reg = <0x023500c4 0xb00>, <0x02350070 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkxge: clkxge {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "xge";
+		reg = <0x023500c8 0xb00>, <0x02350074 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+};
diff --git a/src/arm/k2hk-evm.dts b/src/arm/k2hk-evm.dts
new file mode 100644
index 000000000000..3223cc152a85
--- /dev/null
+++ b/src/arm/k2hk-evm.dts
@@ -0,0 +1,181 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "k2hk.dtsi"
+
+/ {
+	compatible =  "ti,k2hk-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
+
+	soc {
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-sys";
+			};
+
+			refclkpass: refclkpass {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-pass";
+			};
+
+			refclkarm: refclkarm {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <125000000>;
+				clock-output-names = "refclk-arm";
+			};
+
+			refclkddr3a: refclkddr3a {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3a";
+			};
+
+			refclkddr3b: refclkddr3b {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk-ddr3b";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		debug1_1 {
+			label = "keystone:green:debug1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
+		};
+
+		debug1_2 {
+			label = "keystone:red:debug1";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
+		};
+
+		debug2 {
+			label = "keystone:blue:debug2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
+		};
+
+		debug3 {
+			label = "keystone:blue:debug3";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x1fe80000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&spi0 {
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&mdio {
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/src/arm/k2hk.dtsi b/src/arm/k2hk.dtsi
new file mode 100644
index 000000000000..d721f4b737f7
--- /dev/null
+++ b/src/arm/k2hk.dtsi
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Kepler/Hawking soc specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	soc {
+		/include/ "k2hk-clocks.dtsi"
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
+
+		dspgpio1: keystone_dsp_gpio@2620244 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x244>;
+		};
+
+		dspgpio2: keystone_dsp_gpio@2620248 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x248>;
+		};
+
+		dspgpio3: keystone_dsp_gpio@262024c {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x24c>;
+		};
+
+		dspgpio4: keystone_dsp_gpio@2620250 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x250>;
+		};
+
+		dspgpio5: keystone_dsp_gpio@2620254 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x254>;
+		};
+
+		dspgpio6: keystone_dsp_gpio@2620258 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x258>;
+		};
+
+		dspgpio7: keystone_dsp_gpio@262025c {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x25c>;
+		};
+	};
+};
diff --git a/src/arm/k2l-clocks.dtsi b/src/arm/k2l-clocks.dtsi
new file mode 100644
index 000000000000..eb1e3e29f073
--- /dev/null
+++ b/src/arm/k2l-clocks.dtsi
@@ -0,0 +1,267 @@
+/*
+ * Copyright 2013-2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 lamarr SoC clock nodes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	armpllclk: armpllclk@2620370 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "arm-pll-clk";
+		reg = <0x02620370 4>;
+		reg-names = "control";
+	};
+
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclksys>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "papllclk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+	};
+
+	ddr3apllclk: ddr3apllclk@2620360 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclksys>;
+		clock-output-names = "ddr-3a-pll-clk";
+		reg = <0x02620360 4>;
+		reg-names = "control";
+	};
+
+	clkdfeiqnsys: clkdfeiqnsys {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "dfe";
+		reg-names = "control", "domain";
+		reg = <0x02350004 0xb00>, <0x02350000 0x400>;
+		domain-id = <0>;
+	};
+
+	clkpcie1: clkpcie1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x0235002c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <4>;
+	};
+
+	clkgem1: clkgem1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem1";
+		reg = <0x02350040 0xb00>, <0x02350024 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <9>;
+	};
+
+	clkgem2: clkgem2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem2";
+		reg = <0x02350044 0xb00>, <0x02350028 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <10>;
+	};
+
+	clkgem3: clkgem3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem3";
+		reg = <0x02350048 0xb00>, <0x0235002c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <11>;
+	};
+
+	clktac: clktac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tac";
+		reg = <0x02350064 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkrac: clkrac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "rac";
+		reg = <0x02350068 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <17>;
+	};
+
+	clkdfepd0: clkdfepd0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dfe-pd0";
+		reg = <0x0235006c 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <18>;
+	};
+
+	clkfftc0: clkfftc0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-0";
+		reg = <0x02350070 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <19>;
+	};
+
+	clkosr: clkosr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "osr";
+		reg = <0x02350088 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <21>;
+	};
+
+	clktcp3d0: clktcp3d0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-0";
+		reg = <0x0235008c 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <22>;
+	};
+
+	clktcp3d1: clktcp3d1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tcp3d-1";
+		reg = <0x02350094 0xb00>, <0x02350058 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <23>;
+	};
+
+	clkvcp0: clkvcp0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-0";
+		reg = <0x0235009c 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp1: clkvcp1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-1";
+		reg = <0x023500a0 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp2: clkvcp2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-2";
+		reg = <0x023500a4 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkvcp3: clkvcp3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "vcp-3";
+		reg = <0x023500a8 0xb00>, <0x02350060 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <24>;
+	};
+
+	clkbcp: clkbcp {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "bcp";
+		reg = <0x023500bc 0xb00>, <0x02350068 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <26>;
+	};
+
+	clkdfepd1: clkdfepd1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "dfe-pd1";
+		reg = <0x023500c0 0xb00>, <0x02350044 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <27>;
+	};
+
+	clkfftc1: clkfftc1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "fftc-1";
+		reg = <0x023500c4 0xb00>, <0x023504c0 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <28>;
+	};
+
+	clkiqnail: clkiqnail {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "iqn-ail";
+		reg = <0x023500c8 0xb00>, <0x0235004c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <29>;
+	};
+
+	clkuart2: clkuart2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart2";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart3: clkuart3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart3";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+};
diff --git a/src/arm/k2l-evm.dts b/src/arm/k2l-evm.dts
new file mode 100644
index 000000000000..85cc7f2872d7
--- /dev/null
+++ b/src/arm/k2l-evm.dts
@@ -0,0 +1,130 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr EVM device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "keystone.dtsi"
+#include "k2l.dtsi"
+
+/ {
+	compatible =  "ti,k2l-evm","ti,keystone";
+	model = "Texas Instruments Keystone 2 Lamarr EVM";
+
+	soc {
+		clocks {
+			refclksys: refclksys {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <122880000>;
+				clock-output-names = "refclk-sys";
+			};
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&i2c0 {
+	dtt@50 {
+		compatible = "at,24c1024";
+		reg = <0x50>;
+	};
+};
+
+&aemif {
+	cs0 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <0>;
+		/* all timings in nanoseconds */
+		ti,cs-min-turnaround-ns = <12>;
+		ti,cs-read-hold-ns = <6>;
+		ti,cs-read-strobe-ns = <23>;
+		ti,cs-read-setup-ns = <9>;
+		ti,cs-write-hold-ns = <8>;
+		ti,cs-write-strobe-ns = <23>;
+		ti,cs-write-setup-ns = <8>;
+
+		nand@0,0 {
+			compatible = "ti,keystone-nand","ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0 0x4000000
+			       1 0 0x0000100>;
+
+			ti,davinci-chipselect = <0>;
+			ti,davinci-mask-ale = <0x2000>;
+			ti,davinci-mask-cle = <0x4000>;
+			ti,davinci-mask-chipsel = <0>;
+			nand-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "params";
+				reg = <0x100000 0x80000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "ubifs";
+				reg = <0x180000 0x7FE80000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	nor_flash: n25q128a11@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "Micron,n25q128a11";
+		spi-max-frequency = <54000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "misc";
+			reg = <0x80000 0xf80000>;
+		};
+	};
+};
+
+&mdio {
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
diff --git a/src/arm/k2l.dtsi b/src/arm/k2l.dtsi
new file mode 100644
index 000000000000..e32c3baa77b8
--- /dev/null
+++ b/src/arm/k2l.dtsi
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2014 Texas Instruments, Inc.
+ *
+ * Keystone 2 Lamarr SoC specific device tree
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gic>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	soc {
+
+		/include/ "k2l-clocks.dtsi"
+
+		uart2: serial@02348400 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348400 0x100>;
+			clocks	= <&clkuart2>;
+			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		uart3:	serial@02348800 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02348800 0x100>;
+			clocks	= <&clkuart3>;
+			interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		dspgpio0: keystone_dsp_gpio@02620240 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x240>;
+		};
+
+		dspgpio1: keystone_dsp_gpio@2620244 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x244>;
+		};
+
+		dspgpio2: keystone_dsp_gpio@2620248 {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x248>;
+		};
+
+		dspgpio3: keystone_dsp_gpio@262024c {
+			compatible = "ti,keystone-dsp-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio,syscon-dev = <&devctrl 0x24c>;
+		};
+	};
+};
+
+&spi0 {
+       ti,davinci-spi-num-cs = <5>;
+};
+
+&spi1 {
+       ti,davinci-spi-num-cs = <3>;
+};
+
+&spi2 {
+       ti,davinci-spi-num-cs = <5>;
+       /* Pin muxed. Enabled and configured by Bootloader */
+       status = "disabled";
+};
+
+&mdio {
+	reg = <0x26200f00 0x100>;
+};
diff --git a/src/arm/keystone-clocks.dtsi b/src/arm/keystone-clocks.dtsi
new file mode 100644
index 000000000000..0c334b25781e
--- /dev/null
+++ b/src/arm/keystone-clocks.dtsi
@@ -0,0 +1,414 @@
+/*
+ * Device Tree Source for Keystone 2 clock tree
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+clocks {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	mainmuxclk: mainmuxclk@2310108 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-mux-clock";
+		clocks = <&mainpllclk>, <&refclksys>;
+		reg = <0x02310108 4>;
+		bit-shift = <23>;
+		bit-mask = <1>;
+		clock-output-names = "mainmuxclk";
+	};
+
+	chipclk1: chipclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1";
+	};
+
+	chipclk1rstiso: chipclk1rstiso {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mainmuxclk>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso";
+	};
+
+	gemtraceclk: gemtraceclk@2310120 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310120 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "gemtraceclk";
+	};
+
+	chipstmxptclk: chipstmxptclk {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310164 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "chipstmxptclk";
+	};
+
+	chipclk12: chipclk12 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk12";
+	};
+
+	chipclk13: chipclk13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk13";
+	};
+
+	paclk13: paclk13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&papllclk>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "paclk13";
+	};
+
+	chipclk14: chipclk14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk14";
+	};
+
+	chipclk16: chipclk16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk16";
+	};
+
+	chipclk112: chipclk112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk112";
+	};
+
+	chipclk124: chipclk124 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1>;
+		clock-div = <24>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk114";
+	};
+
+	chipclk1rstiso13: chipclk1rstiso13 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <3>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso13";
+	};
+
+	chipclk1rstiso14: chipclk1rstiso14 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso14";
+	};
+
+	chipclk1rstiso16: chipclk1rstiso16 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <6>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso16";
+	};
+
+	chipclk1rstiso112: chipclk1rstiso112 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&chipclk1rstiso>;
+		clock-div = <12>;
+		clock-mult = <1>;
+		clock-output-names = "chipclk1rstiso112";
+	};
+
+	clkmodrst0: clkmodrst0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "modrst0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkusb: clkusb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemifspi: clkaemifspi {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "aemif-spi";
+		reg = <0x0235000c 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+
+	clkdebugsstrc: clkdebugsstrc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "debugss-trc";
+		reg = <0x02350014 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <1>;
+	};
+
+	clktetbtrc: clktetbtrc {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk13>;
+		clock-output-names = "tetb-trc";
+		reg = <0x02350018 0xb00>, <0x02350004 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <1>;
+	};
+
+	clkpa: clkpa {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&paclk13>;
+		clock-output-names = "pa";
+		reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkcpgmac: clkcpgmac {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "cpgmac";
+		reg = <0x02350020 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clksa: clksa {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkpa>;
+		clock-output-names = "sa";
+		reg = <0x02350024 0xb00>, <0x02350008 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <2>;
+	};
+
+	clkpcie: clkpcie {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "pcie";
+		reg = <0x02350028 0xb00>, <0x0235000c 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <3>;
+	};
+
+	clksr: clksr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1rstiso112>;
+		clock-output-names = "sr";
+		reg = <0x02350034 0xb00>, <0x02350018 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <6>;
+	};
+
+	clkgem0: clkgem0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk1>;
+		clock-output-names = "gem0";
+		reg = <0x0235003c 0xb00>, <0x02350020 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <8>;
+	};
+
+	clkddr30: clkddr30 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk12>;
+		clock-output-names = "ddr3-0";
+		reg = <0x0235005c 0xb00>, <0x02350040 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <16>;
+	};
+
+	clkwdtimer0: clkwdtimer0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer1: clkwdtimer1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer2: clkwdtimer2 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer2";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkwdtimer3: clkwdtimer3 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer3";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clktimer15: clktimer15 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "timer15";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart0: clkuart0 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart0";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkuart1: clkuart1 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "uart1";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkaemif: clkaemif {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "aemif";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkusim: clkusim {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "usim";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clki2c: clki2c {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "i2c";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkspi: clkspi {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkaemifspi>;
+		clock-output-names = "spi";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkgpio: clkgpio {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "gpio";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+
+	clkkeymgr: clkkeymgr {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&clkmodrst0>;
+		clock-output-names = "keymgr";
+		reg = <0x02350000 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
+};
diff --git a/src/arm/keystone.dtsi b/src/arm/keystone.dtsi
new file mode 100644
index 000000000000..c06542b2c954
--- /dev/null
+++ b/src/arm/keystone.dtsi
@@ -0,0 +1,334 @@
+/*
+ * Copyright 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	model = "Texas Instruments Keystone 2 SoC";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0	= &uart0;
+	};
+
+	memory {
+		reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+	};
+
+	gic: interrupt-controller {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x02561000 0x0 0x1000>,
+		      <0x0 0x02562000 0x0 0x2000>,
+		      <0x0 0x02564000 0x0 0x1000>,
+		      <0x0 0x02566000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+				IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,keystone","simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0x0 0x0 0x0 0xc0000000>;
+		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
+
+		pllctrl: pll-controller@02310000 {
+			compatible = "ti,keystone-pllctrl", "syscon";
+			reg = <0x02310000 0x200>;
+		};
+
+		devctrl: device-state-control@02620000 {
+			compatible = "ti,keystone-devctrl", "syscon";
+			reg = <0x02620000 0x1000>;
+		};
+
+		rstctrl: reset-controller {
+			compatible = "ti,keystone-reset";
+			ti,syscon-pll = <&pllctrl 0xe4>;
+			ti,syscon-dev = <&devctrl 0x328>;
+			ti,wdt-list = <0>;
+		};
+
+		/include/ "keystone-clocks.dtsi"
+
+		uart0: serial@02530c00 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02530c00 0x100>;
+			clocks	= <&clkuart0>;
+			interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		uart1:	serial@02531000 {
+			compatible = "ns16550a";
+			current-speed = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			reg = <0x02531000 0x100>;
+			clocks	= <&clkuart1>;
+			interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		i2c0: i2c@2530000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530000 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@2530400 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530400 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@2530800 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x02530800 0x400>;
+			clock-frequency = <100000>;
+			clocks = <&clki2c>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@21000400 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000400 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@21000600 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000600 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi2: spi@21000800 {
+			compatible = "ti,dm6441-spi";
+			reg = <0x21000800 0x200>;
+			num-cs = <4>;
+			ti,davinci-spi-intr-line = <0>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkspi>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_phy: usb_phy@2620738 {
+			compatible = "ti,keystone-usbphy";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2620738 24>;
+			status = "disabled";
+		};
+
+		usb: usb@2680000 {
+			compatible = "ti,keystone-dwc3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x2680000 0x10000>;
+			clocks = <&clkusb>;
+			clock-names = "usb";
+			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+			ranges;
+			dma-coherent;
+			dma-ranges;
+			status = "disabled";
+
+			dwc3@2690000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x2690000 0x70000>;
+				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
+				usb-phy = <&usb_phy>, <&usb_phy>;
+			};
+		};
+
+		wdt: wdt@022f0080 {
+			compatible = "ti,keystone-wdt","ti,davinci-wdt";
+			reg = <0x022f0080 0x80>;
+			clocks = <&clkwdtimer0>;
+		};
+
+		clock_event: timer@22f0000 {
+			compatible = "ti,keystone-timer";
+			reg = <0x022f0000 0x80>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clktimer15>;
+		};
+
+		gpio0: gpio@260bf00 {
+			compatible = "ti,keystone-gpio";
+			reg = <0x0260bf00 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* HW Interrupts mapped to GPIO pins */
+			interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 121 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 123 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 124 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 142 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 143 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 144 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 147 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 148 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 150 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkgpio>;
+			clock-names = "gpio";
+			ti,ngpio = <32>;
+			ti,davinci-gpio-unbanked = <32>;
+		};
+
+		aemif: aemif@21000A00 {
+			compatible = "ti,keystone-aemif", "ti,davinci-aemif";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			clocks = <&clkaemif>;
+			clock-names = "aemif";
+			clock-ranges;
+
+			reg = <0x21000A00 0x00000100>;
+			ranges = <0 0 0x30000000 0x10000000
+				  1 0 0x21000A00 0x00000100>;
+		};
+
+		mdio: mdio@02090300 {
+			compatible	= "ti,keystone_mdio", "ti,davinci_mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg		= <0x02090300 0x100>;
+			status = "disabled";
+			clocks = <&clkpa>;
+			clock-names = "fck";
+			bus_freq	= <2500000>;
+		};
+
+		kirq0: keystone_irq@26202a0 {
+			compatible = "ti,keystone-irq";
+			interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,syscon-dev = <&devctrl 0x2a0>;
+		};
+
+		pcie@21800000 {
+			compatible = "ti,keystone-pcie", "snps,dw-pcie";
+			clocks = <&clkpcie>;
+			clock-names = "pcie";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			reg =  <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
+			ranges = <0x81000000 0 0 0x23250000 0 0x4000
+				0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
+
+			device_type = "pci";
+			num-lanes = <2>;
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
+					<0 0 0 2 &pcie_intc0 1>, /* INT B */
+					<0 0 0 3 &pcie_intc0 2>, /* INT C */
+					<0 0 0 4 &pcie_intc0 3>; /* INT D */
+
+			pcie_msi_intc0: msi-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			pcie_intc0: legacy-interrupt-controller {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+	};
+};
diff --git a/src/arm/kirkwood-6192.dtsi b/src/arm/kirkwood-6192.dtsi
new file mode 100644
index 000000000000..9e6e9e2691d5
--- /dev/null
+++ b/src/arm/kirkwood-6192.dtsi
@@ -0,0 +1,86 @@
+/ {
+	mbus {
+		pciec: pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,88f6192-pinctrl";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+
+		rtc: rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata: sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
+			status = "disabled";
+		};
+
+		sdio: mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/kirkwood-6281.dtsi b/src/arm/kirkwood-6281.dtsi
new file mode 100644
index 000000000000..7dc7d6782e83
--- /dev/null
+++ b/src/arm/kirkwood-6281.dtsi
@@ -0,0 +1,88 @@
+/ {
+	mbus {
+		pciec: pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,88f6281-pinctrl";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+
+		rtc: rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata: sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
+			status = "disabled";
+		};
+
+		sdio: mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/kirkwood-6282.dtsi b/src/arm/kirkwood-6282.dtsi
new file mode 100644
index 000000000000..4680eec990f0
--- /dev/null
+++ b/src/arm/kirkwood-6282.dtsi
@@ -0,0 +1,138 @@
+/ {
+	mbus {
+		pciec: pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+			        0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */
+				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0       1 0 /* Port 1.0 MEM */
+				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0       1 0 /* Port 1.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+
+			pcie1: pcie@2,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
+				reg = <0x1000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 10>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 18>;
+				status = "disabled";
+			};
+		};
+	};
+	ocp@f1000000 {
+
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,88f6282-pinctrl";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+
+			/*
+			 * Default I2C1 pinctrl setting on mpp36/mpp37,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_twsi1: pmx-twsi1 {
+				marvell,pins = "mpp36", "mpp37";
+				marvell,function = "twsi1";
+			};
+
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+
+		thermal: thermal@10078 {
+			compatible = "marvell,kirkwood-thermal";
+			reg = <0x10078 0x4>;
+			status = "okay";
+		};
+
+		rtc: rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		i2c1: i2c@11100 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <32>;
+			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_twsi1>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		sata: sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			phys = <&sata_phy0>, <&sata_phy1>;
+			phy-names = "port0", "port1";
+			status = "disabled";
+		};
+
+		sdio: mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/kirkwood-98dx4122.dtsi b/src/arm/kirkwood-98dx4122.dtsi
new file mode 100644
index 000000000000..9e1f741d74ff
--- /dev/null
+++ b/src/arm/kirkwood-98dx4122.dtsi
@@ -0,0 +1,51 @@
+/ {
+	mbus {
+		pciec: pcie-controller {
+			compatible = "marvell,kirkwood-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
+				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
+
+			pcie0: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &intc 9>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gate_clk 2>;
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			compatible = "marvell,98dx4122-pinctrl";
+
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
diff --git a/src/arm/kirkwood-b3.dts b/src/arm/kirkwood-b3.dts
new file mode 100644
index 000000000000..c9247f8672ae
--- /dev/null
+++ b/src/arm/kirkwood-b3.dts
@@ -0,0 +1,201 @@
+/*
+ * Device Tree file for Excito Bubba B3
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Note: This requires a new'ish version of u-boot, which disables the
+ * L2 cache. If your B3 silently fails to boot, u-boot is probably too
+ * old. Either upgrade, or consider the following email:
+ *
+ * http://lists.debian.org/debian-arm/2012/08/msg00128.html
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Excito B3";
+	compatible = "excito,b3", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+	memory { /* 512 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			/* Wifi model has Atheros chipset on pcie port */
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_red: pmx-led-red {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_blue: pmx-led-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_beeper: pmx-beeper {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p16@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p16";
+				reg = <0>;
+				spi-max-frequency = <40000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0xc0000>;
+					label = "u-boot";
+				};
+
+				partition@c0000 {
+					reg = <0xc0000 0x20000>;
+					label = "u-boot env";
+				};
+
+				partition@e0000 {
+					reg = <0xe0000 0x120000>;
+					label = "data";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			/*
+			 * There is something on the bus at address 0x64.
+			 * Not yet identified what it is, maybe the eeprom
+			 * for the Atheros WiFi chip?
+			 */
+		};
+
+
+		serial@12000 {
+			/* Internal on test pins, 3.3v TTL
+		 	 * UART0_RX = Testpoint 65
+			 * UART0_TX = Testpoint 66
+			 * See the Excito Wiki for more details.
+		 	 */
+			status = "okay";
+		};
+
+		sata@80000 {
+			/* One internal, the second as eSATA */
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-leds {
+		/*
+		 * There is one LED "port" on the front and the colours
+		 * mix together giving some interesting combinations.
+		 */
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_green &pmx_led_red
+			      &pmx_led_blue >;
+		pinctrl-names = "default";
+
+		programming_led {
+			label = "bubba3:green:programming";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		error_led {
+			label = "bubba3:red:error";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		active_led {
+			label = "bubba3:blue:active";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power>;
+		pinctrl-names = "default";
+
+		power-button {
+			/* On the back */
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper: beeper {
+		/* 4KHz Piezoelectric buzzer */
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@24 {
+		device_type = "ethernet-phy";
+		reg = <24>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
diff --git a/src/arm/kirkwood-blackarmor-nas220.dts b/src/arm/kirkwood-blackarmor-nas220.dts
new file mode 100644
index 000000000000..fa02a9aff05e
--- /dev/null
+++ b/src/arm/kirkwood-blackarmor-nas220.dts
@@ -0,0 +1,173 @@
+/*
+ * Device Tree file for Seagate Blackarmor NAS220
+ *
+ * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Seagate Blackarmor NAS220";
+	compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
+		     "marvell,kirkwood";
+
+	memory { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button@1{
+			label = "Reset";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		button@2{
+			label = "Power";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-power {
+			label = "nas220:blue:power";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/*
+ * Serial port routed to connector CN5
+ *
+ * pin 1 - TX (CPU's TX)
+ * pin 4 - RX (CPU's RX)
+ * pin 6 - GND
+ */
+&uart0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_button_reset &pmx_button_power>;
+	pinctrl-names = "default";
+
+	pmx_act_sata0: pmx-act-sata0 {
+		marvell,pins = "mpp15";
+		marvell,function = "sata0";
+	};
+
+	pmx_act_sata1: pmx-act-sata1 {
+		marvell,pins = "mpp16";
+		marvell,function = "sata1";
+	};
+
+	pmx_power_sata0: pmx-power-sata0 {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_sata1: pmx-power-sata1 {
+		marvell,pins = "mpp28";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_reset: pmx-button-reset {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_button_power: pmx-button-power {
+		marvell,pins = "mpp26";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	adt7476: thermal@2e {
+		compatible = "adi,adt7476";
+		reg = <0x2e>;
+	};
+};
+
+&nand {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		 reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-cloudbox.dts b/src/arm/kirkwood-cloudbox.dts
new file mode 100644
index 000000000000..ab6ab4933e6b
--- /dev/null
+++ b/src/arm/kirkwood-cloudbox.dts
@@ -0,0 +1,102 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "LaCie CloudBox";
+	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
+				marvell,pins = "mpp15";
+				marvell,function = "sata0";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_cloudbox_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power push button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "cloudbox:red:fail";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+		blue-sata {
+			label = "cloudbox:blue:sata";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-d2net.dts b/src/arm/kirkwood-d2net.dts
new file mode 100644
index 000000000000..6b7856025001
--- /dev/null
+++ b/src/arm/kirkwood-d2net.dts
@@ -0,0 +1,42 @@
+/*
+ * Device Tree file for d2 Network v2
+ *
+ * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie d2 Network v2";
+	compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "d2net_v2:blue:sata";
+			slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+			cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "d2net_v2:red:fail";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/src/arm/kirkwood-db-88f6281.dts b/src/arm/kirkwood-db-88f6281.dts
new file mode 100644
index 000000000000..c39dd766c75a
--- /dev/null
+++ b/src/arm/kirkwood-db-88f6281.dts
@@ -0,0 +1,30 @@
+/*
+ * Marvell DB-88F6281-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell DB-88F6281-BP Development Board";
+	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/kirkwood-db-88f6282.dts b/src/arm/kirkwood-db-88f6282.dts
new file mode 100644
index 000000000000..701c6b6cdaa2
--- /dev/null
+++ b/src/arm/kirkwood-db-88f6282.dts
@@ -0,0 +1,34 @@
+/*
+ * Marvell DB-88F6282-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-db.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Marvell DB-88F6282-BP Development Board";
+	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/kirkwood-db.dtsi b/src/arm/kirkwood-db.dtsi
new file mode 100644
index 000000000000..812df691ae3d
--- /dev/null
+++ b/src/arm/kirkwood-db.dtsi
@@ -0,0 +1,92 @@
+/*
+ * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
+ *
+ * Saeed Bishara <saeed@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pin-controller@10000 {
+			pmx_sdio_gpios: pmx-sdio-gpios {
+				marvell,pins = "mpp37", "mpp38";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio_gpios>;
+			pinctrl-names = "default";
+			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			status = "okay";
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-dir665.dts b/src/arm/kirkwood-dir665.dts
new file mode 100644
index 000000000000..786959ee9cbe
--- /dev/null
+++ b/src/arm/kirkwood-dir665.dts
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "D-Link DIR-665";
+	compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 =< &pmx_led_usb
+				     &pmx_led_internet_blue
+				     &pmx_led_internet_amber
+				     &pmx_led_5g &pmx_led_status_blue
+				     &pmx_led_wps &pmx_led_status_amber
+				     &pmx_led_24g
+				     &pmx_btn_restart &pmx_btn_wps>;
+			pinctrl-names = "default";
+
+			pmx_led_usb: pmx-led-usb {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_led_internet_blue: pmx-led-internet-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_internet_amber: pmx-led-internet-amber {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_5g: pmx-led-5g {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_status_blue: pmx-led-status-blue {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_wps: pmx-led-wps {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_status_amber: pmx-led-status-amber {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_24g: pmx-led-24g {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_btn_restart: pmx-btn-restart {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_btn_wps: pmx-btn-wps {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l12805d";
+				spi-max-frequency = <50000000>;
+				reg = <0>;
+
+				partition@0 {
+					label = "uboot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "nvram";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				partition@40000 {
+					label = "kernel";
+					reg = <0x40000 0x180000>;
+				};
+
+				partition@1c0000 {
+					label = "rootfs";
+					reg = <0x1c0000 0xe00000>;
+				};
+
+				cal_data: partition@fc0000 {
+					label = "cal_data";
+					reg = <0xfc0000 0x10000>;
+					read-only;
+				};
+
+				partition@fd0000 {
+					label = "lang_pack";
+					reg = <0xfd0000 0x30000>;
+					read-only;
+				};
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		i2c@11000 {
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-usb {
+			label = "dir665:blue:usb";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		blue-internet {
+			/* Can only be turned on if the Internet
+			 * Ethernet port has Link
+			 */
+			label = "dir665:blue:internet";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+		amber-internet {
+			label = "dir665:amber:internet";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		blue-wifi5g {
+			label = "dir665:blue:5g";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+		blue-status {
+			label = "dir665:blue:status";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		blue-wps {
+			label = "dir665:blue:wps";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+		amber-status {
+			label = "dir665:amber:status";
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+		blue-24g {
+			label = "dir665:blue:24g";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0port>;
+		dsa,mii-bus = <&mdio>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan3";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan2";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@6 {
+			       reg = <6>;
+			       label = "cpu";
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+};
+
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
+ * fixed speed and duplex. */
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+/* eth1 is connected to the switch as well. However DSA only supports a
+ * single CPU port. So leave this port disabled to avoid confusion. */
+
+&eth1 {
+	status = "disabled";
+};
+
+/* There is no battery on the boards, so the RTC does not keep time
+ * when there is no power, making it useless. */
+&rtc {
+	status = "disabled";
+};
diff --git a/src/arm/kirkwood-dns320.dts b/src/arm/kirkwood-dns320.dts
new file mode 100644
index 000000000000..d85ef0a91b50
--- /dev/null
+++ b/src/arm/kirkwood-dns320.dts
@@ -0,0 +1,58 @@
+/dts-v1/;
+
+#include "kirkwood-dnskw.dtsi"
+
+/ {
+	model = "D-Link DNS-320 NAS (Rev A1)";
+	compatible = "dlink,dns-320-a1", "dlink,dns-320", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_320
+			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
+			     &pmx_led_white_usb>;
+		pinctrl-names = "default";
+
+		blue-power {
+			label = "dns320:blue:power";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		blue-usb {
+			label = "dns320:blue:usb";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		orange-l_hdd {
+			label = "dns320:orange:l_hdd";
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+		orange-r_hdd {
+			label = "dns320:orange:r_hdd";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+		orange-usb {
+			label = "dns320:orange:usb";
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */
+		};
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/kirkwood-dns325.dts b/src/arm/kirkwood-dns325.dts
new file mode 100644
index 000000000000..5e586ed04c58
--- /dev/null
+++ b/src/arm/kirkwood-dns325.dts
@@ -0,0 +1,62 @@
+/dts-v1/;
+
+#include "kirkwood-dnskw.dtsi"
+
+/ {
+	model = "D-Link DNS-325 NAS (Rev A1)";
+	compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
+			     &pmx_led_red_left_hdd &pmx_led_red_right_hdd
+			     &pmx_led_white_usb>;
+		pinctrl-names = "default";
+
+		white-power {
+			label = "dns325:white:power";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		white-usb {
+			label = "dns325:white:usb";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */
+		};
+		red-l_hdd {
+			label = "dns325:red:l_hdd";
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+		red-r_hdd {
+			label = "dns325:red:r_hdd";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+		red-usb {
+			label = "dns325:red:usb";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+
+			lm75: lm75@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/kirkwood-dnskw.dtsi b/src/arm/kirkwood-dnskw.dtsi
new file mode 100644
index 000000000000..113dcf056dcf
--- /dev/null
+++ b/src/arm/kirkwood-dnskw.dtsi
@@ -0,0 +1,234 @@
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "D-Link DNS NASes (kirkwood-based)";
+	compatible = "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_power &pmx_button_unmount
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "USB unmount button";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			label = "Reset button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 14 GPIO_ACTIVE_LOW
+			 &gpio1 13 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map = <0    0
+				      3000 1
+				      6000 2>;
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0
+				     &pmx_present_sata1 &pmx_fan_tacho
+				     &pmx_temp_alarm>;
+			pinctrl-names = "default";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_right_hdd: pmx-led-red-right-hdd {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_left_hdd: pmx-led-red-left-hdd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_325: pmx-led-red-usb-325 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_320: pmx-led-red-usb-320 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_power_back_on: pmx-power-back-on {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata0: pmx-power-sata0 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata1: pmx-power-sata1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata0: pmx-present-sata0 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata1: pmx-present-sata1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_white_usb: pmx-led-white-usb {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_fan_tacho: pmx-fan-tacho {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high_speed: pmx-fan-high-speed {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low_speed: pmx-fan-low-speed {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_button_unmount: pmx-button-unmount {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_temp_alarm: pmx-temp-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 7 0>;
+		};
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 8 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x500000>;
+	};
+
+	partition@600000 {
+		label = "ramdisk";
+		reg = <0x0600000 0x500000>;
+	};
+
+	partition@b00000 {
+		label = "image";
+		reg = <0x0b00000 0x6600000>;
+	};
+
+	partition@7100000 {
+		label = "mini firmware";
+		reg = <0x7100000 0xa00000>;
+	};
+
+	partition@7b00000 {
+		label = "config";
+		reg = <0x7b00000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-dockstar.dts b/src/arm/kirkwood-dockstar.dts
new file mode 100644
index 000000000000..849736349511
--- /dev/null
+++ b/src/arm/kirkwood-dockstar.dts
@@ -0,0 +1,109 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Seagate FreeAgent Dockstar";
+	compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led-orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
+		pinctrl-names = "default";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x0500000 0xfb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "marvell,88e1116";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-dreamplug.dts b/src/arm/kirkwood-dreamplug.dts
new file mode 100644
index 000000000000..6467c7924195
--- /dev/null
+++ b/src/arm/kirkwood-dreamplug.dts
@@ -0,0 +1,126 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Globalscale Technologies Dreamplug";
+	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_bluetooth: pmx-led-bluetooth {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi: pmx-led-wifi {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi_ap: pmx-led-wifi-ap {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l1606e";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition@100000 {
+					reg = <0x100000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition@180000 {
+					reg = <0x180000 0x10000>;
+					label = "dtb";
+				};
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_bluetooth &pmx_led_wifi
+			     &pmx_led_wifi_ap >;
+		pinctrl-names = "default";
+
+		bluetooth {
+			label = "dreamplug:blue:bluetooth";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wifi {
+			label = "dreamplug:green:wifi";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+		wifi-ap {
+			label = "dreamplug:green:wifi_ap";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood-ds109.dts b/src/arm/kirkwood-ds109.dts
new file mode 100644
index 000000000000..d4bcc1c7f6b3
--- /dev/null
+++ b/src/arm/kirkwood-ds109.dts
@@ -0,0 +1,42 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS109, DS110, DS110jv20";
+	compatible = "synology,ds109", "synology,ds110jv20",
+		     "synology,ds110", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds110jv10.dts b/src/arm/kirkwood-ds110jv10.dts
new file mode 100644
index 000000000000..95bf83b91b4a
--- /dev/null
+++ b/src/arm/kirkwood-ds110jv10.dts
@@ -0,0 +1,42 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS110j v10 and v30";
+	compatible = "synology,ds110jv10", "synology,ds110jv30",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds111.dts b/src/arm/kirkwood-ds111.dts
new file mode 100644
index 000000000000..61f47fbe44d0
--- /dev/null
+++ b/src/arm/kirkwood-ds111.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds112.dts b/src/arm/kirkwood-ds112.dts
new file mode 100644
index 000000000000..bf4143c6cb8f
--- /dev/null
+++ b/src/arm/kirkwood-ds112.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS111";
+	compatible = "synology,ds111", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-30 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds209.dts b/src/arm/kirkwood-ds209.dts
new file mode 100644
index 000000000000..6d25093a9ac4
--- /dev/null
+++ b/src/arm/kirkwood-ds209.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS209";
+	compatible = "synology,ds209", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds210.dts b/src/arm/kirkwood-ds210.dts
new file mode 100644
index 000000000000..2f1933efcac1
--- /dev/null
+++ b/src/arm/kirkwood-ds210.dts
@@ -0,0 +1,47 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS210 v10, v20, v30, DS211j";
+	compatible = "synology,ds210jv10", "synology,ds210jv20",
+		     "synology,ds210jv30", "synology,ds211j",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+
+	regulators-hdd-31 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds212.dts b/src/arm/kirkwood-ds212.dts
new file mode 100644
index 000000000000..99afd462f956
--- /dev/null
+++ b/src/arm/kirkwood-ds212.dts
@@ -0,0 +1,48 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212, DS212p v10, v20, DS213air v10, DS213 v10";
+	compatible = "synology,ds212", "synology,ds212pv10",
+		     "synology,ds212pv10", "synology,ds212pv20",
+		     "synology,ds213airv10", "synology,ds213v10",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds212j.dts b/src/arm/kirkwood-ds212j.dts
new file mode 100644
index 000000000000..f5c4213fc67c
--- /dev/null
+++ b/src/arm/kirkwood-ds212j.dts
@@ -0,0 +1,42 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS212j v10, v20";
+	compatible = "synology,ds212jv10", "synology,ds212jv20",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds409.dts b/src/arm/kirkwood-ds409.dts
new file mode 100644
index 000000000000..e80a962ebba0
--- /dev/null
+++ b/src/arm/kirkwood-ds409.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS409, DS410j";
+	compatible = "synology,ds409", "synology,ds410j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds409slim.dts b/src/arm/kirkwood-ds409slim.dts
new file mode 100644
index 000000000000..cae5af4b88b5
--- /dev/null
+++ b/src/arm/kirkwood-ds409slim.dts
@@ -0,0 +1,41 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology 409slim";
+	compatible = "synology,ds409slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-32-35 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-20 {
+		status = "okay";
+	};
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds411.dts b/src/arm/kirkwood-ds411.dts
new file mode 100644
index 000000000000..623cd4a37d71
--- /dev/null
+++ b/src/arm/kirkwood-ds411.dts
@@ -0,0 +1,53 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411, DS413jv10";
+	compatible = "synology,ds411", "synology,ds413jv10", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	regulators-hdd-34 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds411j.dts b/src/arm/kirkwood-ds411j.dts
new file mode 100644
index 000000000000..3348e330f074
--- /dev/null
+++ b/src/arm/kirkwood-ds411j.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411j";
+	compatible = "synology,ds411j", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+
+	gpio-leds-alarm-12 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-ds411slim.dts b/src/arm/kirkwood-ds411slim.dts
new file mode 100644
index 000000000000..a0a1fad8b4de
--- /dev/null
+++ b/src/arm/kirkwood-ds411slim.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology DS411slim";
+	compatible = "synology,ds411slim", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-goflexnet.dts b/src/arm/kirkwood-goflexnet.dts
new file mode 100644
index 000000000000..aa60a0b049a7
--- /dev/null
+++ b/src/arm/kirkwood-goflexnet.dts
@@ -0,0 +1,189 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Seagate GoFlex Net";
+	compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_0: pmx-led_right_cap_0 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_1: pmx-led_right_cap_1 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_2: pmx-led_right_cap_2 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_3: pmx-led_right_cap_3 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_0: pmx-led_left_cap_0 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_1: pmx-led_left_cap_1 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_2: pmx-led_left_cap_2 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_3: pmx-led_left_cap_3 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led_green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led_orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_orange
+			      &pmx_led_left_cap_0 &pmx_led_left_cap_1
+			      &pmx_led_left_cap_2 &pmx_led_left_cap_3
+			      &pmx_led_right_cap_0 &pmx_led_right_cap_1
+			      &pmx_led_right_cap_2 &pmx_led_right_cap_3
+			    >;
+		pinctrl-names = "default";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "status:orange:fault";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		left0 {
+			label = "status:white:left0";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		left1 {
+			label = "status:white:left1";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		left2 {
+			label = "status:white:left2";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+		left3 {
+			label = "status:white:left3";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		right0 {
+			label = "status:white:right0";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+		right1 {
+			label = "status:white:right1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		right2 {
+			label = "status:white:right2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+		right3 {
+			label = "status:white:right3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0xd800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-guruplug-server-plus.dts b/src/arm/kirkwood-guruplug-server-plus.dts
new file mode 100644
index 000000000000..b2d9834bf458
--- /dev/null
+++ b/src/arm/kirkwood-guruplug-server-plus.dts
@@ -0,0 +1,132 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Globalscale Technologies Guruplug Server Plus";
+	compatible = "globalscale,guruplug-server-plus", "globalscale,guruplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_health_r: pmx-led-health-r {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_g: pmx-led-health-g {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_r: pmx-led-wmode-r {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wmode_g: pmx-led-wmode-g {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		/* AzureWave AW-GH381 WiFi/BT */
+		mvsdio@90000 {
+			status = "okay";
+			non-removable;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g
+			      &pmx_led_wmode_r &pmx_led_wmode_g >;
+		pinctrl-names = "default";
+
+		health-r {
+			label = "guruplug:red:health";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+		health-g {
+			label = "guruplug:green:health";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		wmode-r {
+			label = "guruplug:red:wmode";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+		wmode-g {
+			label = "guruplug:green:wmode";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x00100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x00100000 0x00400000>;
+	};
+
+	partition@500000 {
+		label = "data";
+		reg = <0x00500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		/* Marvell 88E1121R */
+		compatible = "ethernet-phy-id0141.0cb0",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};
diff --git a/src/arm/kirkwood-ib62x0.dts b/src/arm/kirkwood-ib62x0.dts
new file mode 100644
index 000000000000..bfa5edde179c
--- /dev/null
+++ b/src/arm/kirkwood-ib62x0.dts
@@ -0,0 +1,145 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
+	compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_os_red: pmx-led-os-red {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+			pmx_led_os_green: pmx-led-os-green {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb_transfer: pmx-led-usb-transfer {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_button_usb_copy: pmx-button-usb-copy {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_os_red &pmx_led_os_green
+			     &pmx_led_usb_transfer>;
+		pinctrl-names = "default";
+
+		green-os {
+			label = "ib62x0:green:os";
+			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		red-os {
+			label = "ib62x0:red:os";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+		usb-copy {
+			label = "ib62x0:red:usb_copy";
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0xe0000>;
+	};
+
+	partition@e0000 {
+		label = "u-boot environment";
+		reg = <0xe0000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x600000>;
+	};
+
+	partition@700000 {
+		label = "root";
+		reg = <0x0700000 0xf900000>;
+	};
+
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-iconnect.dts b/src/arm/kirkwood-iconnect.dts
new file mode 100644
index 000000000000..38e31d15a62d
--- /dev/null
+++ b/src/arm/kirkwood-iconnect.dts
@@ -0,0 +1,196 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Iomega Iconnect";
+	compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+		linux,initrd-start = <0x4500040>;
+		linux,initrd-end   = <0x4800000>;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_button_otb: pmx-button-otb {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_level: pmx-led-level {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_blue: pmx-led-power-blue {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_red: pmx-power-red {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb1: pmx-led-usb1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb2: pmx-led-usb2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb3: pmx-led-usb3 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb4: pmx-led-usb4 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_otb: pmx-led-otb {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+		serial@12000 {
+			status = "ok";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_level &pmx_led_power_blue
+			      &pmx_led_power_red &pmx_led_usb1
+			      &pmx_led_usb2 &pmx_led_usb3
+			      &pmx_led_usb4 &pmx_led_otb >;
+		pinctrl-names = "default";
+
+		led-level {
+			label = "led_level";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		power-blue {
+			label = "power:blue";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		power-red {
+			label = "power:red";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+		usb1 {
+			label = "usb1:blue";
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+		usb2 {
+			label = "usb2:blue";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+		usb3 {
+			label = "usb3:blue";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+		usb4 {
+			label = "usb4:blue";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+		otb {
+			label = "otb:blue";
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = < &pmx_button_reset &pmx_button_otb >;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "OTB Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0xc0000>;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+	};
+
+	partition@100000 {
+		label = "zImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@540000 {
+		label = "initrd";
+		reg = <0x540000 0x300000>;
+	};
+
+	partition@980000 {
+		label = "boot";
+		reg = <0x980000 0x1f400000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@11 {
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-iomega_ix2_200.dts b/src/arm/kirkwood-iomega_ix2_200.dts
new file mode 100644
index 000000000000..8474bffec0ca
--- /dev/null
+++ b/src/arm/kirkwood-iomega_ix2_200.dts
@@ -0,0 +1,225 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Iomega StorCenter ix2-200";
+	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
+				      &pmx_led_sata_brt_ctrl_2
+				      &pmx_led_backup_brt_ctrl_1
+				      &pmx_led_backup_brt_ctrl_2
+				      &pmx_led_power_brt_ctrl_1
+				      &pmx_led_power_brt_ctrl_2
+				      &pmx_led_health_brt_ctrl_1
+				      &pmx_led_health_brt_ctrl_2
+				      &pmx_led_rebuild_brt_ctrl_1
+				      &pmx_led_rebuild_brt_ctrl_2 >;
+			pinctrl-names = "default";
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup: pmx-led-backup {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_button_otb: pmx-button-otb {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild: pmx-led-rebuild {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_health: pmx-led_health {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+		};
+		i2c@11000 {
+			status = "okay";
+
+			lm63: lm63@4c {
+				compatible = "national,lm63";
+				reg = <0x4c>;
+			};
+		};
+
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_backup &pmx_led_power
+			      &pmx_led_rebuild &pmx_led_health >;
+		pinctrl-names = "default";
+
+		power_led {
+			label = "status:white:power_led";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+		rebuild_led {
+			label = "status:white:rebuild_led";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+		health_led {
+			label = "status:red:health_led";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_reset &pmx_button_power
+			     &pmx_button_otb>;
+		pinctrl-names = "default";
+
+
+		Power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+		Reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+		OTB {
+			label = "OTB Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@a0000 {
+		label = "env";
+		reg = <0xa0000 0x20000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x300000>;
+	};
+
+	partition@400000 {
+		label = "rootfs";
+		reg = <0x400000 0x1C00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@11 {
+		reg = <11>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood-is2.dts b/src/arm/kirkwood-is2.dts
new file mode 100644
index 000000000000..da674bbd49a8
--- /dev/null
+++ b/src/arm/kirkwood-is2.dts
@@ -0,0 +1,34 @@
+/dts-v1/;
+
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Internet Space v2";
+	compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-km_common.dtsi b/src/arm/kirkwood-km_common.dtsi
new file mode 100644
index 000000000000..8367c772c764
--- /dev/null
+++ b/src/arm/kirkwood-km_common.dtsi
@@ -0,0 +1,48 @@
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
+			pinctrl-names = "default";
+
+			pmx_i2c_gpio_sda: pmx-gpio-sda {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_i2c_gpio_scl: pmx-gpio-scl {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
+			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <25>;
+};
diff --git a/src/arm/kirkwood-km_fixedeth.dts b/src/arm/kirkwood-km_fixedeth.dts
new file mode 100644
index 000000000000..9895f2b10f8a
--- /dev/null
+++ b/src/arm/kirkwood-km_fixedeth.dts
@@ -0,0 +1,23 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
+#include "kirkwood-km_common.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Fixed Eth";
+	compatible = "keymile,km_fixedeth", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;  /* <SPEED_1000> */
+		duplex = <1>; /* <DUPLEX_FULL> */
+	};
+};
diff --git a/src/arm/kirkwood-km_kirkwood.dts b/src/arm/kirkwood-km_kirkwood.dts
new file mode 100644
index 000000000000..235bf382fff9
--- /dev/null
+++ b/src/arm/kirkwood-km_kirkwood.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-98dx4122.dtsi"
+#include "kirkwood-km_common.dtsi"
+
+/ {
+	model = "Keymile Kirkwood Reference Design";
+	compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-laplug.dts b/src/arm/kirkwood-laplug.dts
new file mode 100644
index 000000000000..24425660e973
--- /dev/null
+++ b/src/arm/kirkwood-laplug.dts
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "LaCie LaPlug";
+	compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c04";
+				pagesize = <16>;
+				reg = <0x50>;
+			};
+		};
+
+		pinctrl: pin-controller@10000 {
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button@1{
+			label = "Power push button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "laplug_v2:red:power";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		blue-power {
+			label = "laplug_v2:blue:power";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power_back1: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power Back 1";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power_back2: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "USB Power Back 2";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power_front: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "USB Power Front";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	/* Total size : 512MB */
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x100000>; /* 1MB */
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x1000000>; /* 16MB */
+	};
+
+	partition@1100000 {
+		label = "rootfs";
+		reg = <0x1100000 0x1EF00000>; /* 495MB */
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-lschlv2.dts b/src/arm/kirkwood-lschlv2.dts
new file mode 100644
index 000000000000..e2fa368aef25
--- /dev/null
+++ b/src/arm/kirkwood-lschlv2.dts
@@ -0,0 +1,19 @@
+/dts-v1/;
+
+#include "kirkwood-lsxl.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-CHLv2";
+	compatible = "buffalo,lschlv2", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/kirkwood-lsxhl.dts b/src/arm/kirkwood-lsxhl.dts
new file mode 100644
index 000000000000..8d89cdf8d6bf
--- /dev/null
+++ b/src/arm/kirkwood-lsxhl.dts
@@ -0,0 +1,19 @@
+/dts-v1/;
+
+#include "kirkwood-lsxl.dtsi"
+
+/ {
+	model = "Buffalo Linkstation LS-XHL";
+	compatible = "buffalo,lsxhl", "buffalo,lsxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/kirkwood-lsxl.dtsi b/src/arm/kirkwood-lsxl.dtsi
new file mode 100644
index 000000000000..53484474df1f
--- /dev/null
+++ b/src/arm/kirkwood-lsxl.dtsi
@@ -0,0 +1,236 @@
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_power_hdd: pmx-power-hdd {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp11";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp19";
+				marvell,function = "gpo";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function_red {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p40@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p40";
+				reg = <0>;
+				spi-max-frequency = <25000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x60000>;
+					label = "uboot";
+					read-only;
+				};
+
+				partition@60000 {
+					reg = <0x60000 0x10000>;
+					label = "dtb";
+					read-only;
+				};
+
+				partition@70000 {
+					reg = <0x70000 0x10000>;
+					label = "uboot_env";
+				};
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_function &pmx_power_switch
+			     &pmx_power_auto_switch>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Power-on Switch";
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <5>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			label = "Power-auto Switch";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
+			     &pmx_led_info &pmx_led_power
+			     &pmx_led_function_blue>;
+		pinctrl-names = "default";
+
+		led@1 {
+			label = "lsxl:blue:func";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led@2 {
+			label = "lsxl:red:alarm";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led@3 {
+			label = "lsxl:amber:info";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led@4 {
+			label = "lsxl:blue:power";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		led@5 {
+			label = "lsxl:red:func";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 19 GPIO_ACTIVE_LOW
+		         &gpio0 18 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map = <0    3
+		                      1500 2
+		                      3250 1
+		                      5000 0>;
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 11 0>;
+		};
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 0>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood-mplcec4.dts b/src/arm/kirkwood-mplcec4.dts
new file mode 100644
index 000000000000..f3a991837515
--- /dev/null
+++ b/src/arm/kirkwood-mplcec4.dts
@@ -0,0 +1,217 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "MPL CEC4";
+	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+        memory {
+                device_type = "memory";
+                reg = <0x00000000 0x20000000>;
+        };
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_led_health: pmx-led-health {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp34";
+				marvell,function = "sata1";
+			};
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp35";
+				marvell,function = "sata0";
+			};
+
+			pmx_led_user1o: pmx-led-user1o {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user1g: pmx-led-user1g {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0o: pmx-led-user0o {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0g: pmx-led-user0g {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_misc: pmx-led-misc {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+                i2c@11000 {
+                        status = "okay";
+
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c02";
+				reg = <0x57>;
+			};
+
+                };
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			nr-ports = <2>;
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			/* No WP GPIO */
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_health
+			      &pmx_led_user1o
+			      &pmx_led_user1g &pmx_led_user0o
+			      &pmx_led_user0g &pmx_led_misc
+			    >;
+		pinctrl-names = "default";
+
+		health {
+			label = "status:green:health";
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+		};
+
+		user1o {
+			label = "user1:orange";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user1g {
+			label = "user1:green";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user0o {
+			label = "user0:orange";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user0g {
+			label = "user0:green";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		misc {
+			label = "status:orange:misc";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "env";
+		reg = <0x100000 0x80000>;
+	};
+
+	partition@180000 {
+		label = "fdt";
+		reg = <0x180000 0x80000>;
+	};
+
+	partition@200000 {
+		label = "kernel";
+		reg = <0x200000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "rootfs";
+		reg = <0x600000 0x1fa00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood-mv88f6281gtw-ge.dts b/src/arm/kirkwood-mv88f6281gtw-ge.dts
new file mode 100644
index 000000000000..f82827d6fcff
--- /dev/null
+++ b/src/arm/kirkwood-mv88f6281gtw-ge.dts
@@ -0,0 +1,181 @@
+/*
+ * Marvell 88F6281 GTW GE Board
+ *
+ * Lennert Buytenhek <buytenh@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the 6281
+ * and 6282 variants of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Marvell 88F6281 GTW GE Board";
+	compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+        };
+
+	ocp@f1000000 {
+		pin-controller@10000 {
+			pmx_usb_led: pmx-usb-led {
+				marvell,pins = "mpp12";
+				marvell,function = "gpo";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp20", "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_keys: pmx-keys {
+				marvell,pins = "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l12805d";
+				reg = <0>;
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		ehci@50000 {
+			status = "okay";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds &pmx_usb_led>;
+		pinctrl-names = "default";
+
+		green-status {
+			label = "gtw:green:Status";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-status {
+			label = "gtw:red:Status";
+			gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		green-usb {
+			label = "gtw:green:USB";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_keys>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "SWR Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "WPS Button";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0port>;
+		dsa,mii-bus = <&mdio>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
diff --git a/src/arm/kirkwood-net2big.dts b/src/arm/kirkwood-net2big.dts
new file mode 100644
index 000000000000..53dc37a3b687
--- /dev/null
+++ b/src/arm/kirkwood-net2big.dts
@@ -0,0 +1,60 @@
+/*
+ * Device Tree file for LaCie 2Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 2Big Network v2";
+	compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+};
+
+&regulators {
+	regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <2>;
+		regulator-name = "hdd1power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+};
+
+&i2c0 {
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
diff --git a/src/arm/kirkwood-net5big.dts b/src/arm/kirkwood-net5big.dts
new file mode 100644
index 000000000000..36155b749d9f
--- /dev/null
+++ b/src/arm/kirkwood-net5big.dts
@@ -0,0 +1,111 @@
+/*
+ * Device Tree file for LaCie 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-netxbig.dtsi"
+
+/ {
+	model = "LaCie 5Big Network v2";
+	compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+};
+
+&regulators {
+	regulator@2 {
+		compatible = "regulator-fixed";
+		reg = <2>;
+		regulator-name = "hdd1power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@3 {
+		compatible = "regulator-fixed";
+		reg = <3>;
+		regulator-name = "hdd2power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@4 {
+		compatible = "regulator-fixed";
+		reg = <4>;
+		regulator-name = "hdd3power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulator@5 {
+		compatible = "regulator-fixed";
+		reg = <5>;
+		regulator-name = "hdd4power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+	       g762_clk: g762-oscillator {
+			 compatible = "fixed-clock";
+			 #clock-cells = <0>;
+			 clock-frequency = <32768>;
+	       };
+	};
+};
+
+&mdio {
+	ethphy1: ethernet-phy@1 {
+		reg = <0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
+
+&i2c0 {
+	g762@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+		clocks = <&g762_clk>;
+	};
+};
diff --git a/src/arm/kirkwood-netgear_readynas_duo_v2.dts b/src/arm/kirkwood-netgear_readynas_duo_v2.dts
new file mode 100644
index 000000000000..fd733c63bc27
--- /dev/null
+++ b/src/arm/kirkwood-netgear_readynas_duo_v2.dts
@@ -0,0 +1,253 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS Duo v2
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS Duo v2";
+	compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_backup: pmx-button-backup {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_power: pmx-led-blue-power {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_activity: pmx-led-blue-activity {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk1: pmx-led-blue-disk1 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk2: pmx-led-blue-disk2 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_backup: pmx-led-blue-backup {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_poweroff: pmx-poweroff {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+		};
+
+		clocks {
+		       g762_clk: g762-oscillator {
+				 compatible = "fixed-clock";
+				 #clock-cells = <0>;
+				 clock-frequency = <8192>;
+		       };
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			rs5c372a: rs5c372a@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+
+			g762: g762@3e {
+				compatible = "gmt,g762";
+				reg = <0x3e>;
+				clocks = <&g762_clk>; /* input clock */
+				fan_gear_mode = <0>;
+				fan_startv = <1>;
+				pwm_polarity = <0>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_activity
+			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
+			      &pmx_led_blue_backup >;
+		pinctrl-names = "default";
+
+		power_led {
+			label = "status:blue:power_led";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		activity_led {
+			label = "status:blue:activity_led";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		disk1_led {
+			label = "status:blue:disk1_led";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		disk2_led {
+			label = "status:blue:disk2_led";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power &pmx_button_backup
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_regulator: usb3-regulator {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB 3.0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-netgear_readynas_nv+_v2.dts b/src/arm/kirkwood-netgear_readynas_nv+_v2.dts
new file mode 100644
index 000000000000..b514d643fb6c
--- /dev/null
+++ b/src/arm/kirkwood-netgear_readynas_nv+_v2.dts
@@ -0,0 +1,267 @@
+/*
+ * Device Tree file for NETGEAR ReadyNAS NV+ v2
+ *
+ * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "NETGEAR ReadyNAS NV+ v2";
+	compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory { /* 256 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			/* Connected to NEC uPD720200 USB 3.0 controller */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_backup: pmx-button-backup {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_power: pmx-led-blue-power {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_backup: pmx-led-blue-backup {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk1: pmx-led-blue-disk1 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk2: pmx-led-blue-disk2 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk3: pmx-led-blue-disk3 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_blue_disk4: pmx-led-blue-disk4 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_poweroff: pmx-poweroff {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+		};
+
+		clocks {
+		       g762_clk: g762-oscillator {
+				 compatible = "fixed-clock";
+				 #clock-cells = <0>;
+				 clock-frequency = <8192>;
+		       };
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			rs5c372a: rs5c372a@32 {
+				compatible = "ricoh,rs5c372a";
+				reg = <0x32>;
+			};
+
+			g762: g762@3e {
+				compatible = "gmt,g762";
+				reg = <0x3e>;
+				clocks = <&g762_clk>; /* input clock */
+				fan_gear_mode = <0>;
+				fan_startv = <1>;
+				pwm_polarity = <0>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
+			      &pmx_led_blue_disk1 &pmx_led_blue_disk2
+			      &pmx_led_blue_disk3 &pmx_led_blue_disk3 >;
+		pinctrl-names = "default";
+
+		power_led {
+			label = "status:blue:power_led";
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		backup_led {
+			label = "status:blue:backup_led";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		disk1_led {
+			label = "status:blue:disk1_led";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		disk2_led {
+			label = "status:blue:disk2_led";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		disk3_led {
+			label = "status:blue:disk3_led";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		disk4_led {
+			label = "status:blue:disk4_led";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_button_power &pmx_button_backup
+			     &pmx_button_reset>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_regulator: usb3-regulator {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB 3.0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+		read-only;
+	};
+
+	partition@180000 {
+		label = "u-boot-env";
+		reg = <0x180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "minirootfs";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "jffs2";
+		reg = <0x1800000 0x6800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-netxbig.dtsi b/src/arm/kirkwood-netxbig.dtsi
new file mode 100644
index 000000000000..b0cfb7cd30b9
--- /dev/null
+++ b/src/arm/kirkwood-netxbig.dtsi
@@ -0,0 +1,154 @@
+/*
+ * Device Tree common file for LaCie 2Big and 5Big Network v2
+ *
+ * Copyright (C) 2014
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on netxbig_v2-setup.c,
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * button@1 and button@2 represent a three position rocker
+		 * switch. Thus the conventional KEY_POWER does not fit
+		 */
+		button@1 {
+			label = "Back power switch (on|auto)";
+			linux,code = <KEY_ESC>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Back power switch (auto|off)";
+			linux,code = <KEY_1>;
+			linux,input-type = <5>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			label = "Function button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators: regulators {
+		status = "okay";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd0power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_button_function: pmx-button-function {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+	pmx_button_power_off: pmx-button-power-off {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+	pmx_button_power_on: pmx-button-power-on {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
diff --git a/src/arm/kirkwood-ns2-common.dtsi b/src/arm/kirkwood-ns2-common.dtsi
new file mode 100644
index 000000000000..fe6c0246db1a
--- /dev/null
+++ b/src/arm/kirkwood-ns2-common.dtsi
@@ -0,0 +1,96 @@
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_ns2_sata0: pmx-ns2-sata0 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_ns2_sata1: pmx-ns2-sata1 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "mxicy,mx25l4005a";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			eeprom@50 {
+				compatible = "atmel,24c04";
+				pagesize = <16>;
+				reg = <0x50>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Power push button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		red-fail {
+			label = "ns2:red:fail";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy {
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-ns2.dts b/src/arm/kirkwood-ns2.dts
new file mode 100644
index 000000000000..53368d1022cc
--- /dev/null
+++ b/src/arm/kirkwood-ns2.dts
@@ -0,0 +1,34 @@
+/dts-v1/;
+
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space v2";
+	compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-ns2lite.dts b/src/arm/kirkwood-ns2lite.dts
new file mode 100644
index 000000000000..1f2ca60d8b3d
--- /dev/null
+++ b/src/arm/kirkwood-ns2lite.dts
@@ -0,0 +1,34 @@
+/dts-v1/;
+
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Lite v2";
+	compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ide-disk";
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
diff --git a/src/arm/kirkwood-ns2max.dts b/src/arm/kirkwood-ns2max.dts
new file mode 100644
index 000000000000..72c78d0b1116
--- /dev/null
+++ b/src/arm/kirkwood-ns2max.dts
@@ -0,0 +1,53 @@
+/dts-v1/;
+
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	model = "LaCie Network Space Max v2";
+	compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0 &pmx_ns2_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+			 &gpio0  7 GPIO_ACTIVE_LOW
+			 &gpio1  1 GPIO_ACTIVE_LOW
+			 &gpio0 23 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map =
+			<   0  0
+			 1500 15
+			 1700 14
+			 1800 13
+			 2100 12
+			 3100 11
+			 3300 10
+			 4300  9
+			 5500  8>;
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-ns2mini.dts b/src/arm/kirkwood-ns2mini.dts
new file mode 100644
index 000000000000..c441bf62c09f
--- /dev/null
+++ b/src/arm/kirkwood-ns2mini.dts
@@ -0,0 +1,54 @@
+/dts-v1/;
+
+#include "kirkwood-ns2-common.dtsi"
+
+/ {
+	/* This machine is embedded in the first LaCie CloudBox product. */
+	model = "LaCie Network Space Mini v2";
+	compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			pinctrl-0 = <&pmx_ns2_sata0>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <1>;
+		};
+	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 22 GPIO_ACTIVE_LOW
+			 &gpio0  7 GPIO_ACTIVE_LOW
+			 &gpio1  1 GPIO_ACTIVE_LOW
+			 &gpio0 23 GPIO_ACTIVE_LOW>;
+		gpio-fan,speed-map =
+			<   0  0
+			 3000 15
+			 3180 14
+			 4140 13
+			 4570 12
+			 6760 11
+			 7140 10
+			 7980  9
+			 9200  8>;
+		alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+	};
+
+	ns2-leds {
+		compatible = "lacie,ns2-leds";
+
+		blue-sata {
+			label = "ns2:blue:sata";
+			slow-gpio = <&gpio0 29 0>;
+			cmd-gpio = <&gpio0 30 0>;
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
diff --git a/src/arm/kirkwood-nsa310.dts b/src/arm/kirkwood-nsa310.dts
new file mode 100644
index 000000000000..6139df0f376c
--- /dev/null
+++ b/src/arm/kirkwood-nsa310.dts
@@ -0,0 +1,140 @@
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_unknown>;
+			pinctrl-names = "default";
+
+			pmx_led_esata_green: pmx-led-esata-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_esata_red: pmx-led-esata-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_red: pmx-led-usb-red {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_green: pmx-led-hdd-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_red: pmx-led-hdd-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_unknown: pmx-unknown {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			adt7476: adt7476a@2e {
+				compatible = "adi,adt7476";
+				reg = <0x2e>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red
+			     &pmx_led_usb_green &pmx_led_usb_red
+			     &pmx_led_sys_green &pmx_led_sys_red
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd_green &pmx_led_hdd_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa310:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		red-sys {
+			label = "nsa310:red:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd {
+			label = "nsa310:green:hdd";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd {
+			label = "nsa310:red:hdd";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-esata {
+			label = "nsa310:green:esata";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-esata {
+			label = "nsa310:red:esata";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa310:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		red-usb {
+			label = "nsa310:red:usb";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa310:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa310:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/src/arm/kirkwood-nsa310a.dts b/src/arm/kirkwood-nsa310a.dts
new file mode 100644
index 000000000000..3d2b3d494c19
--- /dev/null
+++ b/src/arm/kirkwood-nsa310a.dts
@@ -0,0 +1,114 @@
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/*
+ * There are at least two different NSA310 designs. This variant does
+ * not have the red USB Led.
+ */
+
+/ {
+	compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_led_esata_green: pmx-led-esata-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_esata_red: pmx-led-esata-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_green: pmx-led-hdd-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd_red: pmx-led-hdd-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			lm85: lm85@2e {
+				compatible = "national,lm85";
+				reg = <0x2e>;
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green-sys {
+			label = "nsa310:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		red-sys {
+			label = "nsa310:red:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd {
+			label = "nsa310:green:hdd";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd {
+			label = "nsa310:red:hdd";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-esata {
+			label = "nsa310:green:esata";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-esata {
+			label = "nsa310:red:esata";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa310:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa310:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa310:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/src/arm/kirkwood-nsa320.dts b/src/arm/kirkwood-nsa320.dts
new file mode 100644
index 000000000000..24f686d1044d
--- /dev/null
+++ b/src/arm/kirkwood-nsa320.dts
@@ -0,0 +1,215 @@
+/* Device tree file for the Zyxel NSA 320 NAS box.
+ *
+ * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Based upon the board setup file created by Peter Schildmann */
+
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/ {
+	model = "Zyxel NSA320";
+	compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			/* SATA Activity and Present pins are not connected */
+			pmx_sata0: pmx-sata0 {
+				marvell,pins ;
+				marvell,function = "sata0";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins ;
+				marvell,function = "sata1";
+			};
+
+			pmx_led_hdd2_green: pmx-led-hdd2-green {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd2_red: pmx-led-hdd2-red {
+				marvell,pins = "mpp13";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_data: pmx-mcu-data {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_usb_green: pmx-led-usb-green {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_clk: pmx-mcu-clk {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_mcu_act: pmx-mcu-act {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_green: pmx-led-sys-green {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_orange: pmx-led-sys-orange {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_green: pmx-led-hdd1-green {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_hdd1_red: pmx-led-hdd1-red {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_htp: pmx-htp {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			/* Buzzer needs to be switched at around 1kHz so is
+			   not compatible with the gpio-beeper driver. */
+			pmx_buzzer: pmx-buzzer {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_vid_b1: pmx-vid-b1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_data: pmx-power-resume-data {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_resume_clk: pmx-power-resume-clk {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			pcf8563: pcf8563@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	regulators {
+		usb0_power: regulator@1 {
+			enable-active-high;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
+			     &pmx_led_usb_green
+			     &pmx_led_sys_green &pmx_led_sys_orange
+			     &pmx_led_copy_green &pmx_led_copy_red
+			     &pmx_led_hdd1_green &pmx_led_hdd1_red>;
+		pinctrl-names = "default";
+
+		green-sys {
+			label = "nsa320:green:sys";
+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+		};
+		orange-sys {
+			label = "nsa320:orange:sys";
+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd1 {
+			label = "nsa320:green:hdd1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd1 {
+			label = "nsa320:red:hdd1";
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+		green-hdd2 {
+			label = "nsa320:green:hdd2";
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+		red-hdd2 {
+			label = "nsa320:red:hdd2";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+		green-usb {
+			label = "nsa320:green:usb";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+		green-copy {
+			label = "nsa320:green:copy";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+		red-copy {
+			label = "nsa320:red:copy";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* The following pins are currently not assigned to a driver,
+	   some of them should be configured as inputs.
+	pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
+		     &pmx_htp &pmx_vid_b1
+		     &pmx_power_resume_data &pmx_power_resume_clk>; */
+};
+
+&mdio {
+	status = "okay";
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-nsa3x0-common.dtsi b/src/arm/kirkwood-nsa3x0-common.dtsi
new file mode 100644
index 000000000000..2075a2e828f1
--- /dev/null
+++ b/src/arm/kirkwood-nsa3x0-common.dtsi
@@ -0,0 +1,159 @@
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "ZyXEL NSA310";
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pmx_usb_power: pmx-usb-power {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_pwr_off: pmx-pwr-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_reset: pmx-btn-reset {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_copy: pmx-btn-copy {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_btn_power: pmx-btn-power {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_green: pmx-led-copy-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_copy_red: pmx-led-copy-red {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "ok";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power>;
+		pinctrl-names = "default";
+
+		usb0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <35>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x0100000>;
+		read-only;
+	};
+	partition@100000 {
+		label = "uboot_env";
+		reg = <0x0100000 0x0080000>;
+	};
+	partition@180000 {
+		label = "key_store";
+		reg = <0x0180000 0x0080000>;
+	};
+	partition@200000 {
+		label = "info";
+		reg = <0x0200000 0x0080000>;
+	};
+	partition@280000 {
+		label = "etc";
+		reg = <0x0280000 0x0a00000>;
+	};
+	partition@c80000 {
+		label = "kernel_1";
+		reg = <0x0c80000 0x0a00000>;
+	};
+	partition@1680000 {
+		label = "rootfs1";
+		reg = <0x1680000 0x2fc0000>;
+	};
+	partition@4640000 {
+		label = "kernel_2";
+		reg = <0x4640000 0x0a00000>;
+	};
+	partition@5040000 {
+		label = "rootfs2";
+		reg = <0x5040000 0x2fc0000>;
+	};
+};
diff --git a/src/arm/kirkwood-openblocks_a6.dts b/src/arm/kirkwood-openblocks_a6.dts
new file mode 100644
index 000000000000..fb9dc227255d
--- /dev/null
+++ b/src/arm/kirkwood-openblocks_a6.dts
@@ -0,0 +1,176 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Plat'Home OpenBlocksA6";
+	compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			nr-ports = <1>;
+			status = "okay";
+		};
+
+		i2c@11100 {
+			status = "okay";
+
+			s35390a: s35390a@30 {
+				compatible = "sii,s35390a";
+				reg = <0x30>;
+			};
+		};
+
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+			pinctrl-names = "default";
+
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11", "mpp15",
+					"mpp16";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14", "mpp8",
+					"mpp9";
+				marvell,function = "uart1";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp28", "mpp29", "mpp30", "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_init: pmx-init {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_oc: pmx-usb-oc {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-red {
+			label = "obsa6:red:stat";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-green {
+			label = "obsa6:green:stat";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-yellow {
+			label = "obsa6:yellow:stat";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+        };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Init Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x90000>;
+	};
+
+	partition@90000 {
+		label = "env";
+		reg = <0x90000 0x44000>;
+	};
+
+	partition@d4000 {
+		label = "test";
+		reg = <0xd4000 0x24000>;
+	};
+
+	partition@f4000 {
+		label = "conf";
+		reg = <0xf4000 0x400000>;
+	};
+
+	partition@4f4000 {
+		label = "linux";
+		reg = <0x4f4000 0x1d20000>;
+	};
+
+	partition@2214000 {
+		label = "user";
+		reg = <0x2214000 0x1dec000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-openblocks_a7.dts b/src/arm/kirkwood-openblocks_a7.dts
new file mode 100644
index 000000000000..d5e3bc518968
--- /dev/null
+++ b/src/arm/kirkwood-openblocks_a7.dts
@@ -0,0 +1,205 @@
+/*
+ * Device Tree file for OpenBlocks A7 board
+ *
+ * Copyright (C) 2013 Free Electrons
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Plat'Home OpenBlocksA7";
+	compatible = "plathome,openblocks-a7", "marvell,kirkwood-88f6283", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			nr-ports = <1>;
+			status = "okay";
+		};
+
+		i2c@11100 {
+			status = "okay";
+
+			s24c02: s24c02@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>;
+			pinctrl-names = "default";
+
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11", "mpp15",
+					"mpp16";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14", "mpp8",
+					"mpp9";
+				marvell,function = "uart1";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_dip_switches: pmx-dip-switches {
+				marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47";
+				marvell,function = "gpio";
+			};
+
+			/*
+			 * Accessible on connector J202. The MPP
+			 * listed below are pin 1-7, pin 8 is unused,
+			 * pin 9 is external reset input and pin 10 is
+			 * ground.
+			 */
+			pmx_gpio_header: pmx-gpio-header {
+				marvell,pins = "mpp17", "mpp7", "mpp29", "mpp28",
+					       "mpp35", "mpp34", "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_gpio_init: pmx-init {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_oc: pmx-usb-oc {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_leds: pmx-leds {
+				marvell,pins = "mpp41", "mpp42", "mpp43";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-red {
+			label = "obsa7:red:stat";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-green {
+			label = "obsa7:green:stat";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-yellow {
+			label = "obsa7:yellow:stat";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+        };
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_gpio_init>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			label = "Init Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&nand {
+	chip-delay = <25>;
+	status = "okay";
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x1c0000>;
+	};
+
+	partition@1c0000 {
+		label = "env";
+		reg = <0x1c0000 0x2c0000>;
+	};
+
+	partition@480000 {
+		label = "test";
+		reg = <0x480000 0x160000>;
+	};
+
+	partition@5e0000 {
+		label = "conf";
+		reg = <0x5e0000 0x540000>;
+	};
+
+	partition@b20000 {
+		label = "linux";
+		reg = <0xb20000 0x3d40000>;
+	};
+
+	partition@4860000 {
+		label = "user";
+		reg = <0x4860000 0xb7a0000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood-openrd-base.dts b/src/arm/kirkwood-openrd-base.dts
new file mode 100644
index 000000000000..8af58999606d
--- /dev/null
+++ b/src/arm/kirkwood-openrd-base.dts
@@ -0,0 +1,42 @@
+/*
+ * Marvell OpenRD Base Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * base variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Base";
+	compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		serial@12100 {
+			status = "okay";
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-openrd-client.dts b/src/arm/kirkwood-openrd-client.dts
new file mode 100644
index 000000000000..887b9c1fee43
--- /dev/null
+++ b/src/arm/kirkwood-openrd-client.dts
@@ -0,0 +1,73 @@
+/*
+ * Marvell OpenRD Client Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * client variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Client";
+	compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&cs42l51>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+	ethphy1: ethernet-phy@24 {
+		reg = <24>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
+
diff --git a/src/arm/kirkwood-openrd-ultimate.dts b/src/arm/kirkwood-openrd-ultimate.dts
new file mode 100644
index 000000000000..9f12f8b53e24
--- /dev/null
+++ b/src/arm/kirkwood-openrd-ultimate.dts
@@ -0,0 +1,58 @@
+/*
+ * Marvell OpenRD Ultimate Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are specific to OpenRD
+ * ultimate variant of the Marvell Kirkwood Development Board.
+ */
+
+/dts-v1/;
+
+#include "kirkwood-openrd.dtsi"
+
+/ {
+	model = "OpenRD Ultimate";
+	compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			cs42l51: cs42l51@4a {
+				compatible = "cirrus,cs42l51";
+				reg = <0x4a>;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood-openrd.dtsi b/src/arm/kirkwood-openrd.dtsi
new file mode 100644
index 000000000000..d3330dadf7ed
--- /dev/null
+++ b/src/arm/kirkwood-openrd.dtsi
@@ -0,0 +1,90 @@
+/*
+ * Marvell OpenRD (Base|Client|Ultimate) Board Description
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
+			pinctrl-names = "default";
+
+			pmx_select28: pmx-select-uart-sd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_select34: pmx-select-rs232-rs484 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+
+		};
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			status = "okay";
+			cd-gpios = <&gpio0 29 9>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@600000 {
+		label = "root";
+		reg = <0x0600000 0x1FA00000>;
+	};
+};
diff --git a/src/arm/kirkwood-pogo_e02.dts b/src/arm/kirkwood-pogo_e02.dts
new file mode 100644
index 000000000000..a190080c9c4f
--- /dev/null
+++ b/src/arm/kirkwood-pogo_e02.dts
@@ -0,0 +1,134 @@
+/*
+ * kirkwood-pogo_e02.dts - Device tree file for Pogoplug E02
+ *
+ * Copyright (C) 2015 Christoph Junghans <ottxor@gentoo.org>
+ *
+ * based on information of dts files from
+ *  Arch Linux ARM by Oleg Rakhmanov <moonman.ca@gmail.com>
+ *  OpenWrt by Felix Kaechele <heffer@fedoraproject.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Cloud Engines Pogoplug E02";
+	compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
+		     "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		health {
+			label = "pogo_e02:green:health";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		fault {
+			label = "pogo_e02:orange:fault";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
+		      &pmx_led_green >;
+	pinctrl-names = "default";
+
+	pmx_usb_power_enable: pmx-usb-power-enable {
+		marvell,pins = "mpp29";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_green: pmx-led-green {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_orange: pmx-led-orange {
+		marvell,pins = "mpp49";
+		marvell,function = "gpio";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&nand {
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "pogoplug";
+		reg = <0x0500000 0x2000000>;
+	};
+
+	partition@2500000 {
+		label = "root";
+		reg = <0x02500000 0x5b00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-rd88f6192.dts b/src/arm/kirkwood-rd88f6192.dts
new file mode 100644
index 000000000000..35a29dee8dd8
--- /dev/null
+++ b/src/arm/kirkwood-rd88f6192.dts
@@ -0,0 +1,111 @@
+/*
+ * Marvell RD88F6192 Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the three
+ * variants of the Marvell Kirkwood Development Board.
+ */
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6192.dtsi"
+
+/ {
+	model = "Marvell RD88F6192 reference design";
+	compatible = "marvell,rd88f6192", "marvell,kirkwood-88f6192", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_usb_power>;
+			pinctrl-names = "default";
+
+                        pmx_usb_power: pmx-usb-power {
+                                marvell,pins = "mpp10";
+                                marvell,function = "gpo";
+                        };
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p128";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+			};
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                pinctrl-0 = <&pmx_usb_power>;
+                pinctrl-names = "default";
+
+                usb_power: regulator@0 {
+                        compatible = "regulator-fixed";
+                        reg = <0>;
+                        regulator-name = "USB VBUS";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+                };
+	};
+};
+
+&mdio {
+        status = "okay";
+
+        ethphy0: ethernet-phy@8 {
+                reg = <8>;
+        };
+};
+
+&eth0 {
+        status = "okay";
+        ethernet0-port@0 {
+                phy-handle = <&ethphy0>;
+        };
+};
\ No newline at end of file
diff --git a/src/arm/kirkwood-rd88f6281-a.dts b/src/arm/kirkwood-rd88f6281-a.dts
new file mode 100644
index 000000000000..f2e08b3b33ea
--- /dev/null
+++ b/src/arm/kirkwood-rd88f6281-a.dts
@@ -0,0 +1,43 @@
+/*
+ * Marvell RD88F6181 A Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions for the board with the A0 or
+ * higher stepping of the SoC. The ethernet switch does not have a
+ * "wan" port.
+ */
+
+/dts-v1/;
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+	model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
+	compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	dsa@0 {
+		switch@0 {
+			reg = <10 0>;	 /* MDIO address 10, switch 0 in tree */
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@11 {
+		 reg = <11>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	ethernet1-port@0 {
+		 phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood-rd88f6281-z0.dts b/src/arm/kirkwood-rd88f6281-z0.dts
new file mode 100644
index 000000000000..f4272b64ed7f
--- /dev/null
+++ b/src/arm/kirkwood-rd88f6281-z0.dts
@@ -0,0 +1,35 @@
+/*
+ * Marvell RD88F6181 Z0 stepping descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions for the board using the Z0
+ * stepping of the SoC. The ethernet switch has a "wan" port.
+*/
+
+/dts-v1/;
+
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+	model = "Marvell RD88f6281 Reference design, with Z0 SoC";
+	compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	dsa@0 {
+		switch@0 {
+			reg = <0 0>;    /* MDIO address 0, switch 0 in tree */
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+		};
+	};
+};
+
+&eth1 {
+      status = "disabled";
+};
diff --git a/src/arm/kirkwood-rd88f6281.dtsi b/src/arm/kirkwood-rd88f6281.dtsi
new file mode 100644
index 000000000000..d195e884b3b5
--- /dev/null
+++ b/src/arm/kirkwood-rd88f6281.dtsi
@@ -0,0 +1,136 @@
+/*
+ * Marvell RD88F6181 Common Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions that are common between the two
+ * variants of the Marvell Kirkwood Development Board.
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+			/* No WP GPIO */
+		};
+	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0port>;
+		dsa,mii-bus = <&mdio>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+		};
+       };
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+		read-only;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x200000>;
+	};
+
+	partition@300000 {
+		label = "rootfs";
+		reg = <0x0300000 0x500000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
diff --git a/src/arm/kirkwood-rs212.dts b/src/arm/kirkwood-rs212.dts
new file mode 100644
index 000000000000..3b19f1fd4cac
--- /dev/null
+++ b/src/arm/kirkwood-rs212.dts
@@ -0,0 +1,49 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS212";
+	compatible = "synology,rs212", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-38 {
+		status = "okay";
+	};
+
+	regulators-hdd-30-2 {
+		status = "okay";
+	};
+};
+
+&s35390a {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-rs409.dts b/src/arm/kirkwood-rs409.dts
new file mode 100644
index 000000000000..921ca49e85a4
--- /dev/null
+++ b/src/arm/kirkwood-rs409.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS409";
+	compatible = "synology,rs409", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&rs5c372 {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-rs411.dts b/src/arm/kirkwood-rs411.dts
new file mode 100644
index 000000000000..02852b0c809f
--- /dev/null
+++ b/src/arm/kirkwood-rs411.dts
@@ -0,0 +1,45 @@
+/*
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-synology.dtsi"
+
+/ {
+	model = "Synology RS411 RS812";
+	compatible = "synology,rs411", "synology,rs812", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "okay";
+	};
+
+	gpio-leds-hdd-36 {
+		status = "okay";
+	};
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&s35390a {
+	status = "okay";
+};
diff --git a/src/arm/kirkwood-sheevaplug-common.dtsi b/src/arm/kirkwood-sheevaplug-common.dtsi
new file mode 100644
index 000000000000..7196c7f3e109
--- /dev/null
+++ b/src/arm/kirkwood-sheevaplug-common.dtsi
@@ -0,0 +1,105 @@
+/*
+ * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ *
+ * Licensed under GPLv2
+ */
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_red: pmx-led-red {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_blue: pmx-led-blue {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_sdio_wp: pmx-sdio-wp {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x0100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x0500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-sheevaplug-esata.dts b/src/arm/kirkwood-sheevaplug-esata.dts
new file mode 100644
index 000000000000..e2b4ea4f9e10
--- /dev/null
+++ b/src/arm/kirkwood-sheevaplug-esata.dts
@@ -0,0 +1,43 @@
+/*
+ * kirkwood-sheevaplug-esata.dts - Device tree file for eSATA Sheevaplug
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+#include "kirkwood-sheevaplug-common.dtsi"
+
+/ {
+	model = "Globalscale Technologies eSATA SheevaPlug";
+	compatible = "globalscale,sheevaplug-esata-rev13", "globalscale,sheevaplug-esata", "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>;
+			pinctrl-names = "default";
+			status = "okay";
+			cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_blue>;
+		pinctrl-names = "default";
+
+		health {
+			label = "sheevaplug:blue:health";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/src/arm/kirkwood-sheevaplug.dts b/src/arm/kirkwood-sheevaplug.dts
new file mode 100644
index 000000000000..82f6abf120fd
--- /dev/null
+++ b/src/arm/kirkwood-sheevaplug.dts
@@ -0,0 +1,43 @@
+/*
+ * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
+ *
+ * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
+ *
+ * Licensed under GPLv2
+ */
+
+/dts-v1/;
+
+#include "kirkwood-sheevaplug-common.dtsi"
+
+/ {
+	model = "Globalscale Technologies SheevaPlug";
+	compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
+		pinctrl-names = "default";
+
+		health {
+			label = "sheevaplug:blue:health";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		misc {
+			label = "sheevaplug:red:misc";
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/src/arm/kirkwood-synology.dtsi b/src/arm/kirkwood-synology.dtsi
new file mode 100644
index 000000000000..8be5b2e4626e
--- /dev/null
+++ b/src/arm/kirkwood-synology.dtsi
@@ -0,0 +1,863 @@
+/*
+ * Nodes for Marvell 628x Synology devices
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ * Ben Peddell <klightspeed@killerwolves.net>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/ {
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			pcie2: pcie@2,0 {
+				status = "disabled";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pmx_alarmled_12: pmx-alarmled-12 {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_15: pmx-fanctrl-15 {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_16: pmx-fanctrl-16 {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_17: pmx-fanctrl-17 {
+				marvell,pins = "mpp17";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_18: pmx-fanalarm-18 {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+
+			pmx_hddled_20: pmx-hddled-20 {
+				marvell,pins = "mpp20";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_21: pmx-hddled-21 {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_22: pmx-hddled-22 {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_23: pmx-hddled-23 {
+				marvell,pins = "mpp23";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_24: pmx-hddled-24 {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_25: pmx-hddled-25 {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_26: pmx-hddled-26 {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_27: pmx-hddled-27 {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_28: pmx-hddled-28 {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
+				marvell,pins = "mpp30";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
+				marvell,pins = "mpp31";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_32: pmx-fanctrl-32 {
+				marvell,pins = "mpp32";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanctrl_33: pmx-fanctrl-33 {
+				marvell,pins = "mpp33";
+				marvell,function = "gpo";
+			};
+
+			pmx_fanctrl_34: pmx-fanctrl-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_35: pmx-fanalarm-35 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_36: pmx-hddled-36 {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_37: pmx-hddled-37 {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_38: pmx-hddled-38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_39: pmx-hddled-39 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_40: pmx-hddled-40 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_41: pmx-hddled-41 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_42: pmx-hddled-42 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_43: pmx-hddled-43 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_44: pmx-hddled-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hddled_45: pmx-hddled-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_44: pmx-fanalarm-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_fanalarm_45: pmx-fanalarm-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+		};
+
+		rtc@10300 {
+			status = "disabled";
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@00000000 {
+					reg = <0x00000000 0x00080000>;
+					label = "RedBoot";
+				};
+
+				partition@00080000 {
+					reg = <0x00080000 0x00200000>;
+					label = "zImage";
+				};
+
+				partition@00280000 {
+					reg = <0x00280000 0x00140000>;
+					label = "rd.gz";
+				};
+
+				partition@003c0000 {
+					reg = <0x003c0000 0x00010000>;
+					label = "vendor";
+				};
+
+				partition@003d0000 {
+					reg = <0x003d0000 0x00020000>;
+					label = "RedBoot config";
+				};
+
+				partition@003f0000 {
+					reg = <0x003f0000 0x00010000>;
+					label = "FIS directory";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			rs5c372: rs5c372@32 {
+				status = "disabled";
+				compatible = "ricoh,rs5c372";
+				reg = <0x32>;
+			};
+
+			s35390a: s35390a@30 {
+				status = "disabled";
+				compatible = "sii,s35390a";
+				reg = <0x30>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			status = "okay";
+		};
+
+		poweroff@12100 {
+			compatible = "synology,power-off";
+			reg = <0x12100 0x100>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+
+	gpio-fan-150-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-150-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2200 1
+				       2500 2
+				       3000 4
+				       3300 3
+				       3700 5
+				       3800 6
+				       4200 7 >;
+	};
+
+	gpio-fan-100-32-35 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
+			 &gpio1 1 GPIO_ACTIVE_HIGH
+			 &gpio1 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-18 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_18>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-1 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-fan-100-15-35-3 {
+		status = "disabled";
+		compatible = "gpio-fan";
+		pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
+		             &pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
+			 &gpio0 16 GPIO_ACTIVE_HIGH
+			 &gpio0 17 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
+			       &gpio1 12 GPIO_ACTIVE_HIGH
+			       &gpio1 13 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <    0 0
+				       2500 1
+				       3100 2
+				       3800 3
+				       4600 4
+				       4800 5
+				       4900 6
+				       5000 7 >;
+	};
+
+	gpio-leds-alarm-12 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_alarmled_12>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:alarm";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-20 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
+			     &pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
+			     &pmx_hddled_26 &pmx_hddled_27>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-1 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-21-2 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-36 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
+			     &pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
+			     &pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
+			     &pmx_hddled_45>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-green {
+			label = "synology:green:hdd3";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd3-amber {
+			label = "synology:amber:hdd3";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-green {
+			label = "synology:green:hdd4";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd4-amber {
+			label = "synology:amber:hdd4";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-green {
+			label = "synology:green:hdd5";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd5-amber {
+			label = "synology:amber:hdd5";
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds-hdd-38 {
+		status = "disabled";
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
+		pinctrl-names = "default";
+
+		hdd1-green {
+			label = "synology:green:hdd1";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd1-amber {
+			label = "synology:amber:hdd1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-green {
+			label = "synology:green:hdd2";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+
+		hdd2-amber {
+			label = "synology:amber:hdd2";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators-hdd-29 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-1 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-2 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-30-4 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
+			     &pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd1power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-31 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_31>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators-hdd-34 {
+		status = "disabled";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
+			     &pmx_hdd4_pwr_45>;
+		pinctrl-names = "default";
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "hdd2power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "hdd3power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "hdd4power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			startup-delay-us = <5000000>;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		reg = <9>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
+
+&eth1 {
+	status = "disabled";
+
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood-t5325.dts b/src/arm/kirkwood-t5325.dts
new file mode 100644
index 000000000000..610ec0f95858
--- /dev/null
+++ b/src/arm/kirkwood-t5325.dts
@@ -0,0 +1,231 @@
+/*
+ * Device Tree file for HP t5325 Thin Client"
+ *
+ * Copyright (C) 2014
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "HP t5325 Thin Client";
+	compatible = "hp,t5325", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
+			pinctrl-names = "default";
+
+			pmx_button_power: pmx-button_power {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+			pmx_led: pmx-led {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_usb_sata_power_enable: pmx-usb-sata-power-enable {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7";
+				marvell,function = "spi";
+			};
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_i2s: pmx-i2s {
+				marvell,pins = "mpp39", "mpp40", "mpp41", "mpp42",
+					       "mpp43";
+				marvell,function = "audio";
+			};
+		};
+
+		spi@10600 {
+			status = "okay";
+
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "st,m25p80";
+				spi-max-frequency = <86000000>;
+				reg = <0>;
+				mode = <0>;
+
+				partition@0 {
+					reg = <0x0 0x80000>;
+					label = "u-boot";
+				};
+
+				partition@1 {
+					reg = <0x80000 0x40000>;
+					label = "SSD firmware";
+				};
+
+				partition@2 {
+					reg = <0xc0000 0x10000>;
+					label = "u-boot env";
+				};
+
+				partition@3 {
+					reg = <0xd0000 0x10000>;
+					label = "permanent u-boot env";
+				};
+
+				partition@4 {
+					reg = <0xd0000 0x10000>;
+					label = "permanent u-boot env";
+				};
+			};
+		};
+
+		i2c@11000 {
+			status = "okay";
+
+			alc5621: alc5621@1a {
+				compatible = "realtek,alc5621";
+				reg = <0x1a>;
+				#sound-dai-cells = <0>;
+				add-ctrl = <0x3700>;
+				jack-det-ctrl = <0x4810>;
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		audio: audio-controller@a0000 {
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_usb_sata_power_enable>;
+		pinctrl-names = "default";
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB-SATA Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_button_power>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_power_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPKOUT",
+			"Speaker", "SPKOUTN",
+			"MIC1", "Mic Jack",
+			"MIC2", "Mic Jack";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker",
+			"Microphone", "Mic Jack";
+
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&alc5621>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy {
+		device_type = "ethernet-phy";
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-topkick.dts b/src/arm/kirkwood-topkick.dts
new file mode 100644
index 000000000000..f5c8c0dd41dc
--- /dev/null
+++ b/src/arm/kirkwood-topkick.dts
@@ -0,0 +1,215 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+	model = "Univeral Scientific Industrial Co. Topkick-1281P2";
+	compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			/*
+			 * Switch positions
+			 *
+			 *     /-SW_LEFT(2)
+			 *     |
+			 *     |   /-SW_IDLE
+			 *     |   |
+			 *     |   |   /-SW_RIGHT
+			 *     |   |   |
+			 * PS [L] [I] [R] LEDS
+			 */
+			pinctrl-0 = <&pmx_sw_left &pmx_sw_right
+				     &pmx_sw_idle &pmx_sw_left2>;
+			pinctrl-names = "default";
+
+			pmx_led_disk_yellow: pmx-led-disk-yellow {
+				marvell,pins = "mpp21";
+				marvell,function = "gpio";
+			};
+
+			pmx_sata0_pwr_enable: pmx-sata0-pwr-enable {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_red: pmx-led-sys-red {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_sys_blue: pmx-led-sys-blue {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_wifi_green: pmx-led-wifi-green {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_left: pmx-sw-left {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_right: pmx-sw-right {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_idle: pmx-sw-idle {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_sw_left2: pmx-sw-left2 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_wifi_yellow: pmx-led-wifi-yellow {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		sata@80000 {
+			status = "okay";
+			nr-ports = <1>;
+		};
+
+		i2c@11000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			pinctrl-0 = <&pmx_sdio>;
+			pinctrl-names = "default";
+			status = "okay";
+			/* No CD or WP GPIOs */
+			broken-cd;
+		};
+	};
+
+	gpio-leds {
+		/*
+		 * GPIO LED layout
+		 *
+		 *       /-SYS_LED(2)
+		 *       |
+		 *       |   /-DISK_LED
+		 *       |   |
+		 *       |   |   /-WLAN_LED(2)
+		 *       |   |   |
+		 * [SW] [*] [*] [*]
+		 */
+
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_disk_yellow &pmx_led_sys_red
+			     &pmx_led_sys_blue &pmx_led_wifi_green
+			     &pmx_led_wifi_yellow>;
+		pinctrl-names = "default";
+
+		disk {
+			label = "topkick:yellow:disk";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ide-disk";
+		};
+		system2 {
+			label = "topkick:red:system";
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+		system {
+			label = "topkick:blue:system";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		wifi {
+			label = "topkick:green:wifi";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+		wifi2 {
+			label = "topkick:yellow:wifi";
+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_pwr_enable>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 4 0>;
+		};
+	};
+};
+
+&nand {
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x180000>;
+	};
+
+	partition@180000 {
+		label = "u-boot env";
+		reg = <0x0180000 0x20000>;
+	};
+
+	partition@200000 {
+		label = "uImage";
+		reg = <0x0200000 0x600000>;
+	};
+
+	partition@800000 {
+		label = "uInitrd";
+		reg = <0x0800000 0x1000000>;
+	};
+
+	partition@1800000 {
+		label = "rootfs";
+		reg = <0x1800000 0xe800000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-ts219-6281.dts b/src/arm/kirkwood-ts219-6281.dts
new file mode 100644
index 000000000000..9767d73f3857
--- /dev/null
+++ b/src/arm/kirkwood-ts219-6281.dts
@@ -0,0 +1,55 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
+
+/ {
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethphy0 { reg = <8>; };
diff --git a/src/arm/kirkwood-ts219-6282.dts b/src/arm/kirkwood-ts219-6282.dts
new file mode 100644
index 000000000000..bfc1a32d4e42
--- /dev/null
+++ b/src/arm/kirkwood-ts219-6282.dts
@@ -0,0 +1,65 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
+
+/ {
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+
+			pinctrl-0 = <&pmx_ram_size &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
diff --git a/src/arm/kirkwood-ts219.dtsi b/src/arm/kirkwood-ts219.dtsi
new file mode 100644
index 000000000000..df7f15276575
--- /dev/null
+++ b/src/arm/kirkwood-ts219.dtsi
@@ -0,0 +1,107 @@
+/ {
+	model = "QNAP TS219 family";
+	compatible = "qnap,ts219", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				status = "okay";
+			};
+		};
+	};
+
+	ocp@f1000000 {
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			s35390a: s35390a@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
+		serial@12000 {
+			status = "okay";
+		};
+		serial@12100 {
+			status = "okay";
+		};
+		poweroff@12100 {
+			compatible = "qnap,power-off";
+			reg = <0x12000 0x100>;
+			clocks = <&gate_clk 7>;
+		};
+		spi@10600 {
+			status = "okay";
+
+			m25p128@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "m25p128";
+				reg = <0>;
+				spi-max-frequency = <20000000>;
+				mode = <0>;
+
+				partition@0000000 {
+					reg = <0x00000000 0x00080000>;
+					label = "U-Boot";
+				};
+
+				partition@00200000 {
+					reg = <0x00200000 0x00200000>;
+					label = "Kernel";
+				};
+
+				partition@00400000 {
+					reg = <0x00400000 0x00900000>;
+					label = "RootFS1";
+				};
+				partition@00d00000 {
+					reg = <0x00d00000 0x00300000>;
+					label = "RootFS2";
+				};
+				partition@00040000 {
+					reg = <0x00080000 0x00040000>;
+					label = "U-Boot Config";
+				};
+				partition@000c0000 {
+					reg = <0x000c0000 0x00140000>;
+					label = "NAS Config";
+				};
+			};
+		};
+		sata@80000 {
+			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+			pinctrl-names = "default";
+			status = "okay";
+			nr-ports = <2>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy {
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};
diff --git a/src/arm/kirkwood-ts419-6281.dts b/src/arm/kirkwood-ts419-6281.dts
new file mode 100644
index 000000000000..aa22aa862857
--- /dev/null
+++ b/src/arm/kirkwood-ts419-6281.dts
@@ -0,0 +1,20 @@
+/*
+ * Device Tree file for QNAP TS41X with 6281 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+&ethphy0 { reg = <8>; };
+&ethphy1 { reg = <0>; };
diff --git a/src/arm/kirkwood-ts419-6282.dts b/src/arm/kirkwood-ts419-6282.dts
new file mode 100644
index 000000000000..d7512d4cdced
--- /dev/null
+++ b/src/arm/kirkwood-ts419-6282.dts
@@ -0,0 +1,32 @@
+/*
+ * Device Tree file for QNAP TS41X with 6282 SoC
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+#include "kirkwood-ts219.dtsi"
+#include "kirkwood-ts419.dtsi"
+
+/ {
+	mbus {
+		pcie-controller {
+			status = "okay";
+
+			pcie@2,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&ethphy0 { reg = <0>; };
+&ethphy1 { reg = <1>; };
diff --git a/src/arm/kirkwood-ts419.dtsi b/src/arm/kirkwood-ts419.dtsi
new file mode 100644
index 000000000000..30ab93bfb1e4
--- /dev/null
+++ b/src/arm/kirkwood-ts419.dtsi
@@ -0,0 +1,75 @@
+/*
+ * Device Tree include file for QNAP TS41X
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/ {
+	model = "QNAP TS419 family";
+	compatible = "qnap,ts419", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			/*
+			 * JP1 indicates if an LCD module is installed
+			 * on the serial port (0), or if the port is used
+			 * as a console (1).
+			 */
+			pmx_jumper_jp1: pmx-jumper_jp1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};
diff --git a/src/arm/kirkwood.dtsi b/src/arm/kirkwood.dtsi
new file mode 100644
index 000000000000..464f09a1a4a5
--- /dev/null
+++ b/src/arm/kirkwood.dtsi
@@ -0,0 +1,383 @@
+/include/ "skeleton.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	compatible = "marvell,kirkwood";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,feroceon";
+			reg = <0>;
+			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
+			clock-names = "cpu_clk", "ddrclk", "powersave";
+		};
+	};
+
+	aliases {
+	       gpio0 = &gpio0;
+	       gpio1 = &gpio1;
+	       i2c0 = &i2c0;
+	};
+
+	mbus {
+		compatible = "marvell,kirkwood-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		/* If a board file needs to change this ranges it must replace it completely */
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000	/* internal-regs */
+			  MBUS_ID(0x01, 0x2f) 0 0xf4000000 0x10000	/* nand flash */
+			  MBUS_ID(0x03, 0x01) 0 0xf5000000 0x10000	/* crypto sram */
+			  >;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */
+		pcie-io-aperture  = <0xf2000000 0x100000>;   /*   1 MiB    I/O space */
+
+		cesa: crypto@0301 {
+			compatible = "marvell,orion-crypto";
+			reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>,
+			      <MBUS_ID(0x03, 0x01) 0 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <22>;
+			clocks = <&gate_clk 17>;
+			status = "okay";
+		};
+
+		nand: nand@012f {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cle = <0>;
+			ale = <1>;
+			bank-width = <1>;
+			compatible = "marvell,orion-nand";
+			reg = <MBUS_ID(0x01, 0x2f) 0 0x400>;
+			chip-delay = <25>;
+			/* set partition map and/or chip-delay in board dts */
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_nand>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+	};
+
+	ocp@f1000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf1000000 0x0100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		pinctrl: pin-controller@10000 {
+			/* set compatible property in SoC file */
+			reg = <0x10000 0x20>;
+
+			pmx_ge1: pmx-ge1 {
+				marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23",
+					       "mpp24", "mpp25", "mpp26", "mpp27",
+					       "mpp30", "mpp31", "mpp32", "mpp33";
+				marvell,function = "ge1";
+			};
+
+			pmx_nand: pmx-nand {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+					       "mpp4", "mpp5", "mpp18", "mpp19";
+				marvell,function = "nand";
+			};
+
+			/*
+			 * Default SPI0 pinctrl setting with CSn on mpp0,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+				marvell,function = "spi";
+			};
+
+			pmx_twsi0: pmx-twsi0 {
+				marvell,pins = "mpp8", "mpp9";
+				marvell,function = "twsi0";
+			};
+
+			/*
+			 * Default UART pinctrl setting without RTS/CTS,
+			 * overwrite marvell,pins on board level if required.
+			 */
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14";
+				marvell,function = "uart1";
+			};
+		};
+
+		core_clk: core-clocks@10030 {
+			compatible = "marvell,kirkwood-core-clock";
+			reg = <0x10030 0x4>;
+			#clock-cells = <1>;
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,orion-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <23>;
+			reg = <0x10600 0x28>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_spi>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		gpio0: gpio@10100 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10100 0x40>;
+			ngpios = <32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <35>, <36>, <37>, <38>;
+			clocks = <&gate_clk 7>;
+		};
+
+		gpio1: gpio@10140 {
+			compatible = "marvell,orion-gpio";
+			#gpio-cells = <2>;
+			gpio-controller;
+			reg = <0x10140 0x40>;
+			ngpios = <18>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <39>, <40>, <41>;
+			clocks = <&gate_clk 7>;
+		};
+
+		i2c0: i2c@11000 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <29>;
+			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_twsi0>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "ns16550a";
+			reg = <0x12000 0x100>;
+			reg-shift = <2>;
+			interrupts = <33>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_uart0>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		uart1: serial@12100 {
+			compatible = "ns16550a";
+			reg = <0x12100 0x100>;
+			reg-shift = <2>;
+			interrupts = <34>;
+			clocks = <&gate_clk 7>;
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		mbusc: mbus-controller@20000 {
+			compatible = "marvell,mbus-controller";
+			reg = <0x20000 0x80>, <0x1500 0x20>;
+		};
+
+		sysc: system-controller@20000 {
+			compatible = "marvell,orion-system-controller";
+			reg = <0x20000 0x120>;
+		};
+
+		bridge_intc: bridge-interrupt-ctrl@20110 {
+			compatible = "marvell,orion-bridge-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20110 0x8>;
+			interrupts = <1>;
+			marvell,#interrupts = <6>;
+		};
+
+		gate_clk: clock-gating-control@2011c {
+			compatible = "marvell,kirkwood-gating-clock";
+			reg = <0x2011c 0x4>;
+			clocks = <&core_clk 0>;
+			#clock-cells = <1>;
+		};
+
+		l2: l2-cache@20128 {
+			compatible = "marvell,kirkwood-cache";
+			reg = <0x20128 0x4>;
+		};
+
+		intc: main-interrupt-ctrl@20200 {
+			compatible = "marvell,orion-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x20200 0x10>, <0x20210 0x10>;
+		};
+
+		timer: timer@20300 {
+			compatible = "marvell,orion-timer";
+			reg = <0x20300 0x20>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <1>, <2>;
+			clocks = <&core_clk 0>;
+		};
+
+		wdt: watchdog-timer@20300 {
+			compatible = "marvell,orion-wdt";
+			reg = <0x20300 0x28>, <0x20108 0x4>;
+			interrupt-parent = <&bridge_intc>;
+			interrupts = <3>;
+			clocks = <&gate_clk 7>;
+			status = "okay";
+		};
+
+		usb0: ehci@50000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0x50000 0x1000>;
+			interrupts = <19>;
+			clocks = <&gate_clk 3>;
+			status = "okay";
+		};
+
+		dma0: xor@60800 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60800 0x100
+			       0x60A00 0x100>;
+			status = "okay";
+			clocks = <&gate_clk 8>;
+
+			xor00 {
+			      interrupts = <5>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <6>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
+		dma1: xor@60900 {
+			compatible = "marvell,orion-xor";
+			reg = <0x60900 0x100
+			       0x60B00 0x100>;
+			status = "okay";
+			clocks = <&gate_clk 16>;
+
+			xor00 {
+			      interrupts = <7>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			};
+			xor01 {
+			      interrupts = <8>;
+			      dmacap,memcpy;
+			      dmacap,xor;
+			      dmacap,memset;
+			};
+		};
+
+		eth0: ethernet-controller@72000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72000 0x4000>;
+			clocks = <&gate_clk 0>;
+			marvell,tx-checksum-limit = <1600>;
+			status = "disabled";
+
+			eth0port: ethernet0-port@0 {
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <11>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
+
+		mdio: mdio-bus@72004 {
+			compatible = "marvell,orion-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x72004 0x84>;
+			interrupts = <46>;
+			clocks = <&gate_clk 0>;
+			status = "disabled";
+
+			/* add phy nodes in board file */
+		};
+
+		eth1: ethernet-controller@76000 {
+			compatible = "marvell,kirkwood-eth";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x76000 0x4000>;
+			clocks = <&gate_clk 19>;
+			marvell,tx-checksum-limit = <1600>;
+			pinctrl-0 = <&pmx_ge1>;
+			pinctrl-names = "default";
+			status = "disabled";
+
+			eth1port: ethernet1-port@0 {
+				compatible = "marvell,kirkwood-eth-port";
+				reg = <0>;
+				interrupts = <15>;
+				/* overwrite MAC address in bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				/* set phy-handle property in board file */
+			};
+		};
+
+		sata_phy0: sata-phy@82000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x82000 0x0334>;
+			clocks = <&gate_clk 14>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+			status = "ok";
+		};
+
+		sata_phy1: sata-phy@84000 {
+			compatible = "marvell,mvebu-sata-phy";
+			reg = <0x84000 0x0334>;
+			clocks = <&gate_clk 15>;
+			clock-names = "sata";
+			#phy-cells = <0>;
+			status = "ok";
+		};
+
+		audio0: audio-controller@a0000 {
+			compatible = "marvell,kirkwood-audio";
+			#sound-dai-cells = <0>;
+			reg = <0xa0000 0x2210>;
+			interrupts = <24>;
+			clocks = <&gate_clk 9>;
+			clock-names = "internal";
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/lpc32xx.dtsi b/src/arm/lpc32xx.dtsi
new file mode 100644
index 000000000000..3abebb75fc57
--- /dev/null
+++ b/src/arm/lpc32xx.dtsi
@@ -0,0 +1,299 @@
+/*
+ * NXP LPC32xx SoC
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "nxp,lpc3220";
+	interrupt-parent = <&mic>;
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x20000000 0x20000000 0x30000000>;
+
+		/*
+		 * Enable either SLC or MLC
+		 */
+		slc: flash@20020000 {
+			compatible = "nxp,lpc3220-slc";
+			reg = <0x20020000 0x1000>;
+			status = "disabled";
+		};
+
+		mlc: flash@200a8000 {
+			compatible = "nxp,lpc3220-mlc";
+			reg = <0x200a8000 0x11000>;
+			interrupts = <11 0>;
+			status = "disabled";
+		};
+
+		dma@31000000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0x31000000 0x1000>;
+			interrupts = <0x1c 0>;
+		};
+
+		/*
+		 * Enable either ohci or usbd (gadget)!
+		 */
+		ohci@31020000 {
+			compatible = "nxp,ohci-nxp", "usb-ohci";
+			reg = <0x31020000 0x300>;
+			interrupts = <0x3b 0>;
+			status = "disabled";
+		};
+
+		usbd@31020000 {
+			compatible = "nxp,lpc3220-udc";
+			reg = <0x31020000 0x300>;
+			interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+			status = "disabled";
+		};
+
+		clcd@31040000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x31040000 0x1000>;
+			interrupts = <0x0e 0>;
+			status = "disabled";
+		};
+
+		mac: ethernet@31060000 {
+			compatible = "nxp,lpc-eth";
+			reg = <0x31060000 0x1000>;
+			interrupts = <0x1d 0>;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			ssp0: ssp@20084000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x20084000 0x1000>;
+				interrupts = <0x14 0>;
+			};
+
+			spi1: spi@20088000 {
+				compatible = "nxp,lpc3220-spi";
+				reg = <0x20088000 0x1000>;
+			};
+
+			ssp1: ssp@2008c000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x2008c000 0x1000>;
+				interrupts = <0x15 0>;
+			};
+
+			spi2: spi@20090000 {
+				compatible = "nxp,lpc3220-spi";
+				reg = <0x20090000 0x1000>;
+			};
+
+			i2s0: i2s@20094000 {
+				compatible = "nxp,lpc3220-i2s";
+				reg = <0x20094000 0x1000>;
+			};
+
+			sd@20098000 {
+				compatible = "arm,pl18x", "arm,primecell";
+				reg = <0x20098000 0x1000>;
+				interrupts = <0x0f 0>, <0x0d 0>;
+				status = "disabled";
+			};
+
+			i2s1: i2s@2009C000 {
+				compatible = "nxp,lpc3220-i2s";
+				reg = <0x2009C000 0x1000>;
+			};
+
+			/* UART5 first since it is the default console, ttyS0 */
+			uart5: serial@40090000 {
+				/* actually, ns16550a w/ 64 byte fifos! */
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40090000 0x1000>;
+				interrupts = <9 0>;
+				clock-frequency = <13000000>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart3: serial@40080000 {
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40080000 0x1000>;
+				interrupts = <7 0>;
+				clock-frequency = <13000000>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart4: serial@40088000 {
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40088000 0x1000>;
+				interrupts = <8 0>;
+				clock-frequency = <13000000>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			uart6: serial@40098000 {
+				compatible = "nxp,lpc3220-uart";
+				reg = <0x40098000 0x1000>;
+				interrupts = <10 0>;
+				clock-frequency = <13000000>;
+				reg-shift = <2>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@400A0000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400A0000 0x100>;
+				interrupts = <0x33 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+
+			i2c2: i2c@400A8000 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x400A8000 0x100>;
+				interrupts = <0x32 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+
+			mpwm: mpwm@400E8000 {
+				compatible = "nxp,lpc3220-motor-pwm";
+				reg = <0x400E8000 0x78>;
+				status = "disabled";
+				#pwm-cells = <2>;
+			};
+
+			i2cusb: i2c@31020300 {
+				compatible = "nxp,pnx-i2c";
+				reg = <0x31020300 0x100>;
+				interrupts = <0x3f 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pnx,timeout = <0x64>;
+			};
+		};
+
+		fab {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x20000000 0x20000000 0x30000000>;
+
+			/*
+			 * MIC Interrupt controller includes:
+			 *   MIC @40008000
+			 *   SIC1 @4000C000
+			 *   SIC2 @40010000
+			 */
+			mic: interrupt-controller@40008000 {
+				compatible = "nxp,lpc3220-mic";
+				interrupt-controller;
+				reg = <0x40008000 0xC000>;
+				#interrupt-cells = <2>;
+			};
+
+			uart1: serial@40014000 {
+				compatible = "nxp,lpc3220-hsuart";
+				reg = <0x40014000 0x1000>;
+				interrupts = <26 0>;
+				status = "disabled";
+			};
+
+			uart2: serial@40018000 {
+				compatible = "nxp,lpc3220-hsuart";
+				reg = <0x40018000 0x1000>;
+				interrupts = <25 0>;
+				status = "disabled";
+			};
+
+			uart7: serial@4001c000 {
+				compatible = "nxp,lpc3220-hsuart";
+				reg = <0x4001c000 0x1000>;
+				interrupts = <24 0>;
+				status = "disabled";
+			};
+
+			rtc@40024000 {
+				compatible = "nxp,lpc3220-rtc";
+				reg = <0x40024000 0x1000>;
+				interrupts = <0x34 0>;
+			};
+
+			gpio: gpio@40028000 {
+				compatible = "nxp,lpc3220-gpio";
+				reg = <0x40028000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <3>; /* bank, pin, flags */
+			};
+
+			watchdog@4003C000 {
+				compatible = "nxp,pnx4008-wdt";
+				reg = <0x4003C000 0x1000>;
+			};
+
+			/*
+			 * TSC vs. ADC: Since those two share the same
+			 * hardware, you need to choose from one of the
+			 * following two and do 'status = "okay";' for one of
+			 * them
+			 */
+
+			adc@40048000 {
+				compatible = "nxp,lpc3220-adc";
+				reg = <0x40048000 0x1000>;
+				interrupts = <0x27 0>;
+				status = "disabled";
+			};
+
+			tsc@40048000 {
+				compatible = "nxp,lpc3220-tsc";
+				reg = <0x40048000 0x1000>;
+				interrupts = <0x27 0>;
+				status = "disabled";
+			};
+
+			key@40050000 {
+				compatible = "nxp,lpc3220-key";
+				reg = <0x40050000 0x1000>;
+				interrupts = <54 0>;
+				status = "disabled";
+			};
+
+			pwm: pwm@4005C000 {
+				compatible = "nxp,lpc3220-pwm";
+				reg = <0x4005C000 0x8>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/ls1021a-qds.dts b/src/arm/ls1021a-qds.dts
new file mode 100644
index 000000000000..9c5e16ba8c95
--- /dev/null
+++ b/src/arm/ls1021a-qds.dts
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A QDS Board";
+
+	aliases {
+		enet0_rgmii_phy = &rgmii_phy1;
+		enet1_rgmii_phy = &rgmii_phy2;
+		enet2_rgmii_phy = &rgmii_phy3;
+		enet0_sgmii_phy = &sgmii_phy1c;
+		enet1_sgmii_phy = &sgmii_phy1d;
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: at45db021d@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pca9547: mux@77 {
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ds3232: rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+
+			adt7461a@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x2 0x0 0x0 0x7e800000 0x00010000
+		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	fpga: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		reg = <0x3 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 3 0 0x100>;
+
+		mdio-mux-emi1 {
+			compatible = "mdio-mux-mmioreg";
+			mdio-parent-bus = <&mdio0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x54 1>; /* BRDCFG4 */
+			mux-mask = <0xe0>; /* EMI1[2:0] */
+
+			/* Onboard PHYs */
+			ls1021amdio0: mdio@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			ls1021amdio1: mdio@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy2: ethernet-phy@2 {
+					reg = <0x2>;
+				};
+			};
+
+			ls1021amdio2: mdio@40 {
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rgmii_phy3: ethernet-phy@3 {
+					reg = <0x3>;
+				};
+			};
+
+			ls1021amdio3: mdio@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sgmii_phy1c: ethernet-phy@1c {
+					reg = <0x1c>;
+				};
+			};
+
+			ls1021amdio4: mdio@80 {
+				reg = <0x80>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sgmii_phy1d: ethernet-phy@1d {
+					reg = <0x1d>;
+				};
+			};
+		};
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	tbi0: tbi-phy@8 {
+		reg = <0x8>;
+		device_type = "tbi-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/src/arm/ls1021a-twr.dts b/src/arm/ls1021a-twr.dts
new file mode 100644
index 000000000000..a2c591e2d918
--- /dev/null
+++ b/src/arm/ls1021a-twr.dts
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+	model = "LS1021A TWR Board";
+
+	aliases {
+		enet2_rgmii_phy = &rgmii_phy1;
+		enet0_sgmii_phy = &sgmii_phy2;
+		enet1_sgmii_phy = &sgmii_phy0;
+	};
+};
+
+&dspi1 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: s25fl064k@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl064k";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR Flash on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	sgmii_phy0: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+	};
+	sgmii_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+	};
+	tbi1: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/src/arm/ls1021a.dtsi b/src/arm/ls1021a.dtsi
new file mode 100644
index 000000000000..c70bb27ac65a
--- /dev/null
+++ b/src/arm/ls1021a.dtsi
@@ -0,0 +1,409 @@
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton64.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "fsl,ls1021a";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
+		serial4 = &lpuart4;
+		serial5 = &lpuart5;
+		sysclk = &sysclk;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+			clocks = <&cluster1_clk>;
+		};
+
+		cpu@f01 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf01>;
+			clocks = <&cluster1_clk>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		device_type = "soc";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		gic: interrupt-controller@1400000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x1401000 0x0 0x1000>,
+			      <0x0 0x1402000 0x0 0x1000>,
+			      <0x0 0x1404000 0x0 0x2000>,
+			      <0x0 0x1406000 0x0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dcfg: dcfg@1ee0000 {
+			compatible = "fsl,ls1021a-dcfg", "syscon";
+			reg = <0x0 0x1ee0000 0x0 0x10000>;
+			big-endian;
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1021a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+		};
+
+		clockgen: clocking@1ee1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1ee1000 0x10000>;
+
+			sysclk: sysclk {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-output-names = "sysclk";
+			};
+
+			cga_pll1: pll@800 {
+				compatible = "fsl,qoriq-core-pll-2.0";
+				#clock-cells = <1>;
+				reg = <0x800 0x10>;
+				clocks = <&sysclk>;
+				clock-output-names = "cga-pll1", "cga-pll1-div2",
+						     "cga-pll1-div4";
+			};
+
+			platform_clk: pll@c00 {
+				compatible = "fsl,qoriq-core-pll-2.0";
+				#clock-cells = <1>;
+				reg = <0xc00 0x10>;
+				clocks = <&sysclk>;
+				clock-output-names = "platform-clk", "platform-clk-div2";
+			};
+
+			cluster1_clk: clk0c0@0 {
+				compatible = "fsl,qoriq-core-mux-2.0";
+				#clock-cells = <0>;
+				reg = <0x0 0x10>;
+				clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4";
+				clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>;
+				clock-output-names = "cluster1-clk";
+			};
+		};
+
+		dspi0: dspi@2100000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&platform_clk 1>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: dspi@2110000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&platform_clk 1>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&platform_clk 1>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&platform_clk 1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "i2c";
+			clocks = <&platform_clk 1>;
+			status = "disabled";
+		};
+
+		uart0: serial@21c0500 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21c0500 0x0 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart1: serial@21c0600 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21c0600 0x0 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart2: serial@21d0500 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		uart3: serial@21d0600 {
+			compatible = "fsl,16550-FIFO64", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>;
+			fifo-size = <15>;
+			status = "disabled";
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysclk>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		wdog0: watchdog@2ad0000 {
+			compatible = "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "wdog-en";
+			big-endian;
+		};
+
+		sai1: sai@2b50000 {
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b50000 0x0 0x10000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "sai";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 47>,
+			       <&edma0 1 46>;
+			big-endian;
+			status = "disabled";
+		};
+
+		sai2: sai@2b60000 {
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0x2b60000 0x0 0x10000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&platform_clk 1>;
+			clock-names = "sai";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 45>,
+			       <&edma0 1 44>;
+			big-endian;
+			status = "disabled";
+		};
+
+		edma0: edma@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&platform_clk 1>,
+				 <&platform_clk 1>;
+		};
+
+		mdio0: mdio@2d24000 {
+			compatible = "gianfar";
+			device_type = "mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2d24000 0x0 0x4000>;
+		};
+
+		usb@8600000 {
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+			reg = <0x0 0x8600000 0x0 0x1000>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		usb3@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+		};
+	};
+};
diff --git a/src/arm/meson.dtsi b/src/arm/meson.dtsi
new file mode 100644
index 000000000000..b67ede515bcd
--- /dev/null
+++ b/src/arm/meson.dtsi
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	L2: l2-cache-controller@c4200000 {
+		compatible = "arm,pl310-cache";
+		reg = <0xc4200000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	gic: interrupt-controller@c4301000 {
+		compatible = "arm,cortex-a9-gic";
+		reg = <0xc4301000 0x1000>,
+		      <0xc4300100 0x0100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer@c1109940 {
+		compatible = "amlogic,meson6-timer";
+		reg = <0xc1109940 0x14>;
+		interrupts = <0 10 1>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		wdt: watchdog@c1109900 {
+			compatible = "amlogic,meson6-wdt";
+			reg = <0xc1109900 0x8>;
+		};
+
+		uart_AO: serial@c81004c0 {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc81004c0 0x14>;
+			interrupts = <0 90 1>;
+			clocks = <&clk81>;
+			status = "disabled";
+		};
+
+		uart_A: serial@c81084c0 {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc81084c0 0x14>;
+			interrupts = <0 90 1>;
+			clocks = <&clk81>;
+			status = "disabled";
+		};
+
+		uart_B: serial@c81084dc {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc81084dc 0x14>;
+			interrupts = <0 90 1>;
+			clocks = <&clk81>;
+			status = "disabled";
+		};
+
+		uart_C: serial@c8108700 {
+			compatible = "amlogic,meson-uart";
+			reg = <0xc8108700 0x14>;
+			interrupts = <0 90 1>;
+			clocks = <&clk81>;
+			status = "disabled";
+		};
+
+		i2c_AO: i2c@c8100500 {
+			compatible = "amlogic,meson6-i2c";
+			reg = <0xc8100500 0x20>;
+			interrupts = <0 92 1>;
+			clocks = <&clk81>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c_A: i2c@c1108500 {
+			compatible = "amlogic,meson6-i2c";
+			reg = <0xc1108500 0x20>;
+			interrupts = <0 21 1>;
+			clocks = <&clk81>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c_B: i2c@c11087c0 {
+			compatible = "amlogic,meson6-i2c";
+			reg = <0xc11087c0 0x20>;
+			interrupts = <0 128 1>;
+			clocks = <&clk81>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ir_receiver: ir-receiver@c8100480 {
+			compatible= "amlogic,meson6-ir";
+			reg = <0xc8100480 0x20>;
+			interrupts = <0 15 1>;
+			status = "disabled";
+		};
+	};
+}; /* end of / */
diff --git a/src/arm/meson6-atv1200.dts b/src/arm/meson6-atv1200.dts
new file mode 100644
index 000000000000..d7d351a68944
--- /dev/null
+++ b/src/arm/meson6-atv1200.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "meson6.dtsi"
+
+/ {
+	model = "Geniatech ATV1200";
+	compatible = "geniatech,atv1200", "amlogic,meson6";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+};
diff --git a/src/arm/meson6.dtsi b/src/arm/meson6.dtsi
new file mode 100644
index 000000000000..8b33be15af94
--- /dev/null
+++ b/src/arm/meson6.dtsi
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "meson.dtsi"
+
+/ {
+	model = "Amlogic Meson6 SoC";
+	compatible = "amlogic,meson6";
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+		};
+	};
+
+	clk81: clk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <200000000>;
+	};
+}; /* end of / */
diff --git a/src/arm/meson8.dtsi b/src/arm/meson8.dtsi
new file mode 100644
index 000000000000..1f442a7fe03b
--- /dev/null
+++ b/src/arm/meson8.dtsi
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public License
+ *     along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "meson.dtsi"
+
+/ {
+	model = "Amlogic Meson8 SoC";
+	compatible = "amlogic,meson8";
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+		};
+
+		cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+		};
+
+		cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+		};
+	};
+
+	clk81: clk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <141666666>;
+	};
+}; /* end of / */
diff --git a/src/arm/mmp2-brownstone.dts b/src/arm/mmp2-brownstone.dts
new file mode 100644
index 000000000000..350208c5e1ed
--- /dev/null
+++ b/src/arm/mmp2-brownstone.dts
@@ -0,0 +1,196 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "mmp2.dtsi"
+
+/ {
+	model = "Marvell MMP2 Brownstone Development Board";
+	compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
+
+	chosen {
+		bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	soc {
+		apb@d4000000 {
+			uart3: uart@d4018000 {
+				status = "okay";
+			};
+			twsi1: i2c@d4011000 {
+				status = "okay";
+				pmic: max8925@3c {
+					compatible = "maxium,max8925";
+					reg = <0x3c>;
+					interrupts = <1>;
+					interrupt-parent = <&intcmux4>;
+					interrupt-controller;
+					#interrupt-cells = <1>;
+					maxim,tsc-irq = <0>;
+
+					regulators {
+						SDV1 {
+							regulator-min-microvolt = <637500>;
+							regulator-max-microvolt = <1425000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						SDV2 {
+							regulator-min-microvolt = <650000>;
+							regulator-max-microvolt = <2225000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						SDV3 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO1 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO2 {
+							regulator-min-microvolt = <650000>;
+							regulator-max-microvolt = <2250000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO3 {
+							regulator-min-microvolt = <650000>;
+							regulator-max-microvolt = <2250000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO4 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO5 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO6 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO7 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO8 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO9 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO10 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+						};
+						LDO11 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO12 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO13 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO14 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO15 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO16 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO17 {
+							regulator-min-microvolt = <650000>;
+							regulator-max-microvolt = <2250000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO18 {
+							regulator-min-microvolt = <650000>;
+							regulator-max-microvolt = <2250000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO19 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO20 {
+							regulator-min-microvolt = <750000>;
+							regulator-max-microvolt = <3900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+					};
+					backlight {
+						maxim,max8925-dual-string = <0>;
+					};
+					charger {
+						batt-detect = <0>;
+						topoff-threshold = <1>;
+						fast-charge = <7>;
+						no-temp-support = <0>;
+						no-insert-detect = <0>;
+					};
+				};
+			};
+			rtc: rtc@d4010000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/mmp2.dtsi b/src/arm/mmp2.dtsi
new file mode 100644
index 000000000000..766bbb8495b6
--- /dev/null
+++ b/src/arm/mmp2.dtsi
@@ -0,0 +1,254 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/marvell,mmp2.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp2-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+			intcmux4: interrupt-controller@d4282150 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <4>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x150 0x4>, <0x168 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux5: interrupt-controller@d4282154 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <5>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x154 0x4>, <0x16c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+				mrvl,clr-mfp-irq = <1>;
+			};
+
+			intcmux9: interrupt-controller@d4282180 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <9>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x180 0x4>, <0x17c 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <3>;
+			};
+
+			intcmux17: interrupt-controller@d4282158 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <17>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x158 0x4>, <0x170 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <5>;
+			};
+
+			intcmux35: interrupt-controller@d428215c {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <35>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x15c 0x4>, <0x174 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <15>;
+			};
+
+			intcmux51: interrupt-controller@d4282160 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <51>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x160 0x4>, <0x178 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+
+			intcmux55: interrupt-controller@d4282188 {
+				compatible = "mrvl,mmp2-mux-intc";
+				interrupts = <55>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x188 0x4>, <0x184 0x4>;
+				reg-names = "mux status", "mux mask";
+				mrvl,intc-nr-irqs = <2>;
+			};
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			uart1: uart@d4030000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4030000 0x1000>;
+				interrupts = <27>;
+				clocks = <&soc_clocks MMP2_CLK_UART0>;
+				resets = <&soc_clocks MMP2_CLK_UART0>;
+				status = "disabled";
+			};
+
+			uart2: uart@d4017000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <28>;
+				clocks = <&soc_clocks MMP2_CLK_UART1>;
+				resets = <&soc_clocks MMP2_CLK_UART1>;
+				status = "disabled";
+			};
+
+			uart3: uart@d4018000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <24>;
+				clocks = <&soc_clocks MMP2_CLK_UART2>;
+				resets = <&soc_clocks MMP2_CLK_UART2>;
+				status = "disabled";
+			};
+
+			uart4: uart@d4016000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4016000 0x1000>;
+				interrupts = <46>;
+				clocks = <&soc_clocks MMP2_CLK_UART3>;
+				resets = <&soc_clocks MMP2_CLK_UART3>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "marvell,mmp2-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				clocks = <&soc_clocks MMP2_CLK_GPIO>;
+				resets = <&soc_clocks MMP2_CLK_GPIO>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+
+				gcb4: gpio@d4019104 {
+					reg = <0xd4019104 0x4>;
+				};
+
+				gcb5: gpio@d4019108 {
+					reg = <0xd4019108 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
+				resets = <&soc_clocks MMP2_CLK_TWSI0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4025000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4025000 0x1000>;
+				interrupts = <58>;
+				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
+				resets = <&soc_clocks MMP2_CLK_TWSI1>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <1 0>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				interrupt-parent = <&intcmux5>;
+				clocks = <&soc_clocks MMP2_CLK_RTC>;
+				resets = <&soc_clocks MMP2_CLK_RTC>;
+				status = "disabled";
+			};
+		};
+
+		soc_clocks: clocks{
+			compatible = "marvell,mmp2-clock";
+			reg = <0xd4050000 0x1000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git a/src/arm/moxart-uc7112lx.dts b/src/arm/moxart-uc7112lx.dts
new file mode 100644
index 000000000000..10d088df0c35
--- /dev/null
+++ b/src/arm/moxart-uc7112lx.dts
@@ -0,0 +1,117 @@
+/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+/include/ "moxart.dtsi"
+
+/ {
+	model = "MOXA UC-7112-LX";
+	compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	clocks {
+		ref12: ref12M {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+	};
+
+	flash@80000000,0 {
+		compatible = "numonyx,js28f128", "cfi-flash";
+		reg = <0x80000000 0x1000000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0x40000>;
+		};
+		partition@40000 {
+			label = "linux kernel";
+			reg = <0x40000 0x1C0000>;
+		};
+		partition@200000 {
+			label = "root filesystem";
+			reg = <0x200000 0x800000>;
+		};
+		partition@a00000 {
+			label = "user filesystem";
+			reg = <0xa00000 0x600000>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		user-led {
+			label = "ready-led";
+			gpios = <&gpio 27 0x1>;
+			default-state = "on";
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio_keys_polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <500>;
+		button@25 {
+			label = "GPIO Reset";
+			linux,code = <116>;
+			gpios = <&gpio 25 1>;
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
+	};
+};
+
+&clk_pll {
+	clocks = <&ref12>;
+};
+
+&sdhci {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+		compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/moxart.dtsi b/src/arm/moxart.dtsi
new file mode 100644
index 000000000000..1fd27ed65a01
--- /dev/null
+++ b/src/arm/moxart.dtsi
@@ -0,0 +1,148 @@
+/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "moxa,moxart";
+	model = "MOXART";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "faraday,fa526";
+			reg = <0>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x90000000 0x10000000>;
+		ranges;
+
+		intc: interrupt-controller@98800000 {
+			compatible = "moxa,moxart-ic";
+			reg = <0x98800000 0x38>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-mask = <0x00080000>;
+		};
+
+		clk_pll: clk_pll@98100000 {
+			compatible = "moxa,moxart-pll-clock";
+			#clock-cells = <0>;
+			reg = <0x98100000 0x34>;
+		};
+
+		clk_apb: clk_apb@98100000 {
+			compatible = "moxa,moxart-apb-clock";
+			#clock-cells = <0>;
+			reg = <0x98100000 0x34>;
+			clocks = <&clk_pll>;
+		};
+
+		timer: timer@98400000 {
+			compatible = "moxa,moxart-timer";
+			reg = <0x98400000 0x42>;
+			interrupts = <19 1>;
+			clocks = <&clk_apb>;
+		};
+
+		gpio: gpio@98700000 {
+			gpio-controller;
+			#gpio-cells = <2>;
+			compatible = "moxa,moxart-gpio";
+			reg = <0x98700000 0xC>;
+		};
+
+		rtc: rtc {
+			compatible = "moxa,moxart-rtc";
+			gpio-rtc-sclk = <&gpio 5 0>;
+			gpio-rtc-data = <&gpio 6 0>;
+			gpio-rtc-reset = <&gpio 7 0>;
+		};
+
+		dma: dma@90500000 {
+			compatible = "moxa,moxart-dma";
+			reg = <0x90500080 0x40>;
+			interrupts = <24 0>;
+			#dma-cells = <1>;
+		};
+
+		watchdog: watchdog@98500000 {
+			compatible = "moxa,moxart-watchdog";
+			reg = <0x98500000 0x10>;
+			clocks = <&clk_apb>;
+		};
+
+		sdhci: sdhci@98e00000 {
+			compatible = "moxa,moxart-sdhci";
+			reg = <0x98e00000 0x5C>;
+			interrupts = <5 0>;
+			clocks = <&clk_apb>;
+			dmas =  <&dma 5>,
+				<&dma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mdio0: mdio@90900090 {
+			compatible = "moxa,moxart-mdio";
+			reg = <0x90900090 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mdio1: mdio@92000090 {
+			compatible = "moxa,moxart-mdio";
+			reg = <0x92000090 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mac0: mac@90900000 {
+			compatible = "moxa,moxart-mac";
+			reg = <0x90900000 0x90>;
+			interrupts = <25 0>;
+			phy-handle = <&ethphy0>;
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		mac1: mac@92000000 {
+			compatible = "moxa,moxart-mac";
+			reg = <0x92000000 0x90>;
+			interrupts = <27 0>;
+			phy-handle = <&ethphy1>;
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		uart0: uart@98200000 {
+			compatible = "ns16550a";
+			reg = <0x98200000 0x20>;
+			interrupts = <31 8>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <14745600>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/mt6589-aquaris5.dts b/src/arm/mt6589-aquaris5.dts
new file mode 100644
index 000000000000..594a6f3bebda
--- /dev/null
+++ b/src/arm/mt6589-aquaris5.dts
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6589.dtsi"
+
+/ {
+	model = "bq Aquaris5";
+	compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
+
+	chosen {
+		bootargs = "console=ttyS0,921600n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/src/arm/mt6589.dtsi b/src/arm/mt6589.dtsi
new file mode 100644
index 000000000000..106b61b10030
--- /dev/null
+++ b/src/arm/mt6589.dtsi
@@ -0,0 +1,142 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "mediatek,mt6589";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		system_clk: dummy13m {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		rtc_clk: dummy32k {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		uart_clk: dummy26m {
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt6577-timer";
+			reg = <0x10008000 0x80>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt6589-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0x10200100 0x1c>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0x10211000 0x1000>,
+			      <0x10212000 0x1000>,
+			      <0x10214000 0x2000>,
+			      <0x10216000 0x2000>;
+		};
+
+		uart0: serial@11006000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11006000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11007000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11007000 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11008000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11008000 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart3: serial@11009000 {
+			compatible = "mediatek,mt6577-uart";
+			reg = <0x11009000 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/mt6592-evb.dts b/src/arm/mt6592-evb.dts
new file mode 100644
index 000000000000..b57237e6394a
--- /dev/null
+++ b/src/arm/mt6592-evb.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Howard Chen <ibanezchen@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6592.dtsi"
+
+/ {
+	model = "mt6592 evb";
+	compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
diff --git a/src/arm/mt6592.dtsi b/src/arm/mt6592.dtsi
new file mode 100644
index 000000000000..c69201ffff72
--- /dev/null
+++ b/src/arm/mt6592.dtsi
@@ -0,0 +1,143 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Howard Chen <ibanezchen@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "mediatek,mt6592";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+		cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x4>;
+		};
+		cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x5>;
+		};
+		cpu@6 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x6>;
+		};
+		cpu@7 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x7>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200220 {
+		compatible = "mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200220 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x1000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11002000 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11003000 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11004000 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/mt8127-moose.dts b/src/arm/mt8127-moose.dts
new file mode 100644
index 000000000000..073e295a1cb4
--- /dev/null
+++ b/src/arm/mt8127-moose.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt8127.dtsi"
+
+/ {
+	model = "MediaTek MT8127 Moose Board";
+	compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
+
+	memory {
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/mt8127.dtsi b/src/arm/mt8127.dtsi
new file mode 100644
index 000000000000..aaa786233d93
--- /dev/null
+++ b/src/arm/mt8127.dtsi
@@ -0,0 +1,142 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton64.dtsi"
+
+/ {
+	compatible = "mediatek,mt8127";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		system_clk: dummy13m {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		rtc_clk: dummy32k {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		uart_clk: dummy26m {
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+			#clock-cells = <0>;
+                };
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8127-timer",
+					"mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x80>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		sysirq: interrupt-controller@10200100 {
+			compatible = "mediatek,mt8127-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200100 0 0x1c>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10211000 0 0x1000>,
+			      <0 0x10212000 0 0x1000>,
+			      <0 0x10214000 0 0x2000>,
+			      <0 0x10216000 0 0x2000>;
+		};
+
+		uart0: serial@11006000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11007000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11008000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart3: serial@11009000 {
+			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/mt8135-evbp1.dts b/src/arm/mt8135-evbp1.dts
new file mode 100644
index 000000000000..36677382bdd8
--- /dev/null
+++ b/src/arm/mt8135-evbp1.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt8135.dtsi"
+
+/ {
+	model = "MediaTek MT8135 evaluation board";
+	compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
+
+	memory {
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/src/arm/mt8135.dtsi b/src/arm/mt8135.dtsi
new file mode 100644
index 000000000000..a161e99ffcc4
--- /dev/null
+++ b/src/arm/mt8135.dtsi
@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton64.dtsi"
+
+/ {
+	compatible = "mediatek,mt8135";
+	interrupt-parent = <&sysirq>;
+
+	cpu-map {
+		cluster0 {
+			core0 {
+				cpu = <&cpu0>;
+			};
+			core1 {
+				cpu = <&cpu1>;
+			};
+		};
+
+		cluster1 {
+			core0 {
+				cpu = <&cpu2>;
+			};
+			core1 {
+				cpu = <&cpu3>;
+			};
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x001>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+		};
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		system_clk: dummy13m {
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+			#clock-cells = <0>;
+		};
+
+		rtc_clk: dummy32k {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+
+		uart_clk: dummy26m {
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+			#clock-cells = <0>;
+		};
+
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		timer: timer@10008000 {
+			compatible = "mediatek,mt8135-timer",
+					"mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x80>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&system_clk>, <&rtc_clk>;
+			clock-names = "system-clk", "rtc-clk";
+		};
+
+		sysirq: interrupt-controller@10200030 {
+			compatible = "mediatek,mt8135-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200030 0 0x1c>;
+		};
+
+		gic: interrupt-controller@10211000 {
+			compatible = "arm,cortex-a15-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10211000 0 0x1000>,
+			      <0 0x10212000 0 0x1000>,
+			      <0 0x10214000 0 0x2000>,
+			      <0 0x10216000 0 0x2000>;
+		};
+
+		uart0: serial@11006000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11006000 0 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11007000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11007000 0 0x400>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11008000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11008000 0 0x400>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart3: serial@11009000 {
+			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
+			reg = <0 0x11009000 0 0x400>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+	};
+};
diff --git a/src/arm/mxs-pinfunc.h b/src/arm/mxs-pinfunc.h
new file mode 100644
index 000000000000..c6da987b20cb
--- /dev/null
+++ b/src/arm/mxs-pinfunc.h
@@ -0,0 +1,31 @@
+/*
+ * Header providing constants for i.MX28 pinctrl bindings.
+ *
+ * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_MXS_PINCTRL_H__
+#define __DT_BINDINGS_MXS_PINCTRL_H__
+
+/* fsl,drive-strength property */
+#define MXS_DRIVE_4mA		0
+#define MXS_DRIVE_8mA		1
+#define MXS_DRIVE_12mA		2
+#define MXS_DRIVE_16mA		3
+
+/* fsl,voltage property */
+#define MXS_VOLTAGE_LOW		0
+#define MXS_VOLTAGE_HIGH	1
+
+/* fsl,pull-up property */
+#define MXS_PULL_DISABLE	0
+#define MXS_PULL_ENABLE		1
+
+#endif /* __DT_BINDINGS_MXS_PINCTRL_H__ */
diff --git a/src/arm/nspire-classic.dtsi b/src/arm/nspire-classic.dtsi
new file mode 100644
index 000000000000..9565199bce7a
--- /dev/null
+++ b/src/arm/nspire-classic.dtsi
@@ -0,0 +1,74 @@
+/*
+ *  linux/arch/arm/boot/nspire-classic.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/include/ "nspire.dtsi"
+
+&lcd {
+	lcd-type = "classic";
+};
+
+&fast_timer {
+	/* compatible = "lsi,zevio-timer"; */
+	reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
+};
+
+&uart {
+	compatible = "ns16550";
+	reg-shift = <2>;
+	reg-io-width = <4>;
+	clocks = <&apb_pclk>;
+	no-loopback-test;
+};
+
+&timer0 {
+	/* compatible = "lsi,zevio-timer"; */
+	reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
+};
+
+&timer1 {
+	compatible = "lsi,zevio-timer";
+	reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+};
+
+&keypad {
+	active-low;
+
+};
+
+&base_clk {
+	compatible = "lsi,nspire-classic-clock";
+};
+
+&ahb_clk {
+	compatible = "lsi,nspire-classic-ahb-divider";
+};
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x10000000 0x2000000>; /* 32 MB */
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		intc: interrupt-controller@DC000000 {
+			compatible = "lsi,zevio-intc";
+			interrupt-controller;
+			reg = <0xDC000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+	};
+	chosen {
+		bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
+	};
+};
diff --git a/src/arm/nspire-clp.dts b/src/arm/nspire-clp.dts
new file mode 100644
index 000000000000..fa5a044656de
--- /dev/null
+++ b/src/arm/nspire-clp.dts
@@ -0,0 +1,45 @@
+/*
+ *  linux/arch/arm/boot/nspire-clp.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00020039
+	0x0004002c 	0x00050034 	0x00060015
+	0x0007000b 	0x0008002d 	0x01000033
+	0x0101004e 	0x01020011 	0x01030004
+	0x0104002f 	0x01050003 	0x01060016
+	0x01070002 	0x01080014 	0x02000062
+	0x0201000c 	0x0202001f 	0x02030007
+	0x02040013 	0x02050006 	0x02060010
+	0x02070005 	0x02080019 	0x03000027
+	0x03010037 	0x03020018 	0x0303000a
+	0x03040031 	0x03050009 	0x03060032
+	0x03070008 	0x03080026 	0x04000028
+	0x04010035 	0x04020025 	0x04040024
+	0x04060017 	0x04080023 	0x05000028
+	0x05020022 	0x0503001b 	0x05040021
+	0x0505001a 	0x05060012 	0x0507006f
+	0x05080020 	0x0509002a 	0x0601001c
+	0x0602002e 	0x06030068 	0x06040030
+	0x0605006d 	0x0606001e 	0x06070001
+	0x0608002b 	0x0609000f 	0x07000067
+	0x0702006a 	0x0704006c 	0x07060069
+	0x0707000e 	0x0708001d 	0x070a000d
+	>;
+};
+
+/ {
+	model = "TI-NSPIRE Clickpad";
+	compatible = "ti,nspire-clp";
+};
diff --git a/src/arm/nspire-cx.dts b/src/arm/nspire-cx.dts
new file mode 100644
index 000000000000..375b924f60d8
--- /dev/null
+++ b/src/arm/nspire-cx.dts
@@ -0,0 +1,112 @@
+/*
+ *  linux/arch/arm/boot/nspire-cx.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+
+/include/ "nspire.dtsi"
+
+&lcd {
+	lcd-type = "cx";
+};
+
+&fast_timer {
+	/* compatible = "arm,sp804", "arm,primecell"; */
+};
+
+&uart {
+	compatible = "arm,pl011", "arm,primecell";
+
+	clocks = <&uart_clk>, <&apb_pclk>;
+	clock-names = "uart_clk", "apb_pclk";
+};
+
+&timer0 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&timer1 {
+	compatible = "arm,sp804", "arm,primecell";
+};
+
+&base_clk {
+	compatible = "lsi,nspire-cx-clock";
+};
+
+&ahb_clk {
+	compatible = "lsi,nspire-cx-ahb-divider";
+};
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00040039
+	0x0005002c 	0x00060015 	0x0007000b
+	0x0008000f 	0x0100002d 	0x01010011
+	0x0102002f 	0x01030004 	0x01040016
+	0x01050014 	0x0106001f 	0x01070002
+	0x010a006a 	0x02000013 	0x02010010
+	0x02020019 	0x02030007 	0x02040018
+	0x02050031 	0x02060032 	0x02070005
+	0x02080028 	0x0209006c 	0x03000026
+	0x03010025 	0x03020024 	0x0303000a
+	0x03040017 	0x03050023 	0x03060022
+	0x03070008 	0x03080035 	0x03090069
+	0x04000021 	0x04010012 	0x04020020
+	0x0404002e 	0x04050030 	0x0406001e
+	0x0407000d 	0x04080037 	0x04090067
+	0x05010038 	0x0502000c 	0x0503001b
+	0x05040034 	0x0505001a 	0x05060006
+	0x05080027 	0x0509000e 	0x050a006f
+	0x0600002b 	0x0602004e 	0x06030068
+	0x06040003 	0x0605006d 	0x06060009
+	0x06070001 	0x0609000f 	0x0708002a
+	0x0709001d 	0x070a0033 	>;
+};
+
+/ {
+	model = "TI-NSPIRE CX";
+	compatible = "ti,nspire-cx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x10000000 0x4000000>; /* 64 MB */
+	};
+
+	uart_clk: uart_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		intc: interrupt-controller@DC000000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xDC000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		apb@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			i2c@90050000 {
+				compatible = "snps,designware-i2c";
+				reg = <0x90050000 0x1000>;
+				interrupts = <20>;
+			};
+		};
+	};
+	chosen {
+		bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0";
+	};
+};
diff --git a/src/arm/nspire-tp.dts b/src/arm/nspire-tp.dts
new file mode 100644
index 000000000000..621391ce6ed6
--- /dev/null
+++ b/src/arm/nspire-tp.dts
@@ -0,0 +1,44 @@
+/*
+ *  linux/arch/arm/boot/nspire-tp.dts
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+/dts-v1/;
+
+/include/ "nspire-classic.dtsi"
+
+&keypad {
+	linux,keymap = <
+	0x0000001c 	0x0001001c 	0x00040039
+	0x0005002c 	0x00060015 	0x0007000b
+	0x0008000f 	0x0100002d 	0x01010011
+	0x0102002f 	0x01030004 	0x01040016
+	0x01050014 	0x0106001f 	0x01070002
+	0x010a006a 	0x02000013 	0x02010010
+	0x02020019 	0x02030007 	0x02040018
+	0x02050031 	0x02060032 	0x02070005
+	0x02080028 	0x0209006c 	0x03000026
+	0x03010025 	0x03020024 	0x0303000a
+	0x03040017 	0x03050023 	0x03060022
+	0x03070008 	0x03080035 	0x03090069
+	0x04000021 	0x04010012 	0x04020020
+	0x0404002e 	0x04050030 	0x0406001e
+	0x0407000d 	0x04080037 	0x04090067
+	0x05010038 	0x0502000c 	0x0503001b
+	0x05040034 	0x0505001a 	0x05060006
+	0x05080027 	0x0509000e 	0x050a006f
+	0x0600002b 	0x0602004e 	0x06030068
+	0x06040003 	0x0605006d 	0x06060009
+	0x06070001 	0x0609000f 	0x0708002a
+	0x0709001d 	0x070a0033 	>;
+};
+
+/ {
+	model = "TI-NSPIRE Touchpad";
+	compatible = "ti,nspire-tp";
+};
diff --git a/src/arm/nspire.dtsi b/src/arm/nspire.dtsi
new file mode 100644
index 000000000000..a22ffe633b49
--- /dev/null
+++ b/src/arm/nspire.dtsi
@@ -0,0 +1,175 @@
+/*
+ *  linux/arch/arm/boot/nspire.dtsi
+ *
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&intc>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	bootrom: bootrom@00000000 {
+		reg = <0x00000000 0x80000>;
+	};
+
+	sram: sram@A4000000 {
+		device = "memory";
+		reg = <0xA4000000 0x20000>;
+	};
+
+	timer_clk: timer_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	base_clk: base_clk {
+		#clock-cells = <0>;
+		reg = <0x900B0024 0x4>;
+	};
+
+	ahb_clk: ahb_clk {
+		#clock-cells = <0>;
+		reg = <0x900B0024 0x4>;
+		clocks = <&base_clk>;
+	};
+
+	apb_pclk: apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <2>;
+		clock-mult = <1>;
+		clocks = <&ahb_clk>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		spi: spi@A9000000 {
+			reg = <0xA9000000 0x1000>;
+		};
+
+		usb0: usb@B0000000 {
+			reg = <0xB0000000 0x1000>;
+			interrupts = <8>;
+		};
+
+		usb1: usb@B4000000 {
+			reg = <0xB4000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		lcd: lcd@C0000000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0xC0000000 0x1000>;
+			interrupts = <21>;
+
+			clocks = <&apb_pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		adc: adc@C4000000 {
+			reg = <0xC4000000 0x1000>;
+			interrupts = <11>;
+		};
+
+		tdes: crypto@C8010000 {
+			reg = <0xC8010000 0x1000>;
+		};
+
+		sha256: crypto@CC000000 {
+			reg = <0xCC000000 0x1000>;
+		};
+
+		apb@90000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clock-ranges;
+			ranges;
+
+			gpio: gpio@90000000 {
+				reg = <0x90000000 0x1000>;
+				interrupts = <7>;
+			};
+
+			fast_timer: timer@90010000 {
+				reg = <0x90010000 0x1000>;
+				interrupts = <17>;
+			};
+
+			uart: serial@90020000 {
+				reg = <0x90020000 0x1000>;
+				interrupts = <1>;
+			};
+
+			timer0: timer@900C0000 {
+				reg = <0x900C0000 0x1000>;
+
+				clocks = <&timer_clk>;
+			};
+
+			timer1: timer@900D0000 {
+				reg = <0x900D0000 0x1000>;
+				interrupts = <19>;
+
+				clocks = <&timer_clk>;
+			};
+
+			watchdog: watchdog@90060000 {
+				compatible = "arm,amba-primecell";
+				reg = <0x90060000 0x1000>;
+				interrupts = <3>;
+			};
+
+			rtc: rtc@90090000 {
+				reg = <0x90090000 0x1000>;
+				interrupts = <4>;
+			};
+
+			misc: misc@900A0000 {
+				reg = <0x900A0000 0x1000>;
+			};
+
+			pwr: pwr@900B0000 {
+				reg = <0x900B0000 0x1000>;
+				interrupts = <15>;
+			};
+
+			keypad: input@900E0000 {
+				compatible = "ti,nspire-keypad";
+				reg = <0x900E0000 0x1000>;
+				interrupts = <16>;
+
+				scan-interval = <1000>;
+				row-delay = <200>;
+
+				clocks = <&apb_pclk>;
+			};
+
+			contrast: contrast@900F0000 {
+				reg = <0x900F0000 0x1000>;
+			};
+
+			led: led@90110000 {
+				reg = <0x90110000 0x1000>;
+			};
+		};
+	};
+};
diff --git a/src/arm/omap-gpmc-smsc911x.dtsi b/src/arm/omap-gpmc-smsc911x.dtsi
new file mode 100644
index 000000000000..445fafc73254
--- /dev/null
+++ b/src/arm/omap-gpmc-smsc911x.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Common file for GPMC connected smsc911x on omaps
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet@gpmc {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,device-width = <1>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cs-on-ns = <5>;
+		gpmc,cs-rd-off-ns = <150>;
+		gpmc,cs-wr-off-ns = <150>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <15>;
+		gpmc,adv-wr-off-ns = <40>;
+		gpmc,oe-on-ns = <45>;
+		gpmc,oe-off-ns = <140>;
+		gpmc,we-on-ns = <45>;
+		gpmc,we-off-ns = <140>;
+		gpmc,rd-cycle-ns = <155>;
+		gpmc,wr-cycle-ns = <155>;
+		gpmc,access-ns = <120>;
+		gpmc,page-burst-access-ns = <20>;
+		gpmc,bus-turnaround-ns = <75>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/src/arm/omap-gpmc-smsc9221.dtsi b/src/arm/omap-gpmc-smsc9221.dtsi
new file mode 100644
index 000000000000..73e272fadc20
--- /dev/null
+++ b/src/arm/omap-gpmc-smsc9221.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Common file for GPMC connected smsc9221 on omaps
+ *
+ * Compared to smsc911x, smsc9221 (and others like smsc9217
+ * or smsc 9218) has faster timings, leading to higher
+ * bandwidth.
+ *
+ * Note that the board specifc DTS file needs to specify
+ * ranges, pinctrl, reg, interrupt parent and interrupts.
+ */
+
+/ {
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ethernet@gpmc {
+		compatible = "smsc,lan9221","smsc,lan9115";
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <42>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <42>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <36>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <54>;
+		gpmc,access-ns = <36>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <18>;
+		gpmc,wr-access-ns = <42>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/src/arm/omap-zoom-common.dtsi b/src/arm/omap-zoom-common.dtsi
new file mode 100644
index 000000000000..46ef3e443861
--- /dev/null
+++ b/src/arm/omap-zoom-common.dtsi
@@ -0,0 +1,91 @@
+/*
+ * Common features on the Zoom debug board
+ */
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+	ranges = <3 0 0x10000000 0x1000000>,	/* CS3: 16MB for UART */
+		 <7 0 0x2c000000 0x01000000>;
+
+	/*
+	 * Four port TL16CP754C serial port on GPMC,
+	 * they probably share the same GPIO IRQ
+	 * REVISIT: Add timing support from slls644g.pdf
+	 */
+	uart@3,0 {
+		compatible = "ns16550a";
+		reg = <3 0 8>;	/* CS3, offset 0, IO size 8 */
+		bank-width = <2>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
+		clock-frequency = <1843200>;
+		current-speed = <115200>;
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <1>;
+		gpmc,wait-pin = <1>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cs-on-ns = <5>;
+		gpmc,cs-rd-off-ns = <155>;
+		gpmc,cs-wr-off-ns = <155>;
+		gpmc,adv-on-ns = <15>;
+		gpmc,adv-rd-off-ns = <40>;
+		gpmc,adv-wr-off-ns = <40>;
+		gpmc,oe-on-ns = <45>;
+		gpmc,oe-off-ns = <145>;
+		gpmc,we-on-ns = <45>;
+		gpmc,we-off-ns = <145>;
+		gpmc,rd-cycle-ns = <155>;
+		gpmc,wr-cycle-ns = <155>;
+		gpmc,access-ns = <145>;
+		gpmc,page-burst-access-ns = <20>;
+		gpmc,bus-turnaround-ns = <20>;
+		gpmc,cycle2cycle-delay-ns = <20>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <45>;
+		gpmc,wr-access-ns = <145>;
+	};
+	uart@3,1 {
+		compatible = "ns16550a";
+		reg = <3 0x100 8>;	/* CS3, offset 0x100, IO size 8 */
+		bank-width = <2>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
+		clock-frequency = <1843200>;
+		current-speed = <115200>;
+	};
+	uart@3,2 {
+		compatible = "ns16550a";
+		reg = <3 0x200 8>;	/* CS3, offset 0x200, IO size 8 */
+		bank-width = <2>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
+		clock-frequency = <1843200>;
+		current-speed = <115200>;
+	};
+	uart@3,3 {
+		compatible = "ns16550a";
+		reg = <3 0x300 8>;	/* CS3, offset 0x300, IO size 8 */
+		bank-width = <2>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_EDGE_RISING>;	/* gpio102 */
+		clock-frequency = <1843200>;
+		current-speed = <115200>;
+	};
+
+	ethernet@gpmc {
+		reg = <7 0 0xff>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;	/* gpio158 */
+	};
+};
diff --git a/src/arm/omap2.dtsi b/src/arm/omap2.dtsi
new file mode 100644
index 000000000000..59d1c297bb30
--- /dev/null
+++ b/src/arm/omap2.dtsi
@@ -0,0 +1,298 @@
+/*
+ * Device Tree Source for OMAP2 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1136jf-s";
+			device_type = "cpu";
+		};
+	};
+
+	pmu {
+		compatible = "arm,arm1136-pmu";
+		interrupts = <3>;
+	};
+
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap2-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		aes: aes@480a6000 {
+			compatible = "ti,omap2-aes";
+			ti,hwmods = "aes";
+			reg = <0x480a6000 0x50>;
+			dmas = <&sdma 9 &sdma 10>;
+			dma-names = "tx", "rx";
+		};
+
+		hdq1w: 1w@480b2000 {
+			compatible = "ti,omap2420-1w";
+			ti,hwmods = "hdq1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+		};
+
+		intc: interrupt-controller@1 {
+			compatible = "ti,omap2-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x480FE000 0x1000>;
+		};
+
+		sdma: dma-controller@48056000 {
+			compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
+			ti,hwmods = "dma";
+			reg = <0x48056000 0x1000>;
+			interrupts = <12>,
+				     <13>,
+				     <14>,
+				     <15>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <64>;
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c1";
+			reg = <0x48070000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c2";
+			reg = <0x48072000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
+		};
+
+		mcspi1: mcspi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi1";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
+			dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
+				&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: mcspi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi2";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
+			dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		rng: rng@480a0000 {
+			compatible = "ti,omap2-rng";
+			ti,hwmods = "rng";
+			reg = <0x480a0000 0x50>;
+			interrupts = <52>;
+		};
+
+		sham: sham@480a4000 {
+			compatible = "ti,omap2-sham";
+			ti,hwmods = "sham";
+			reg = <0x480a4000 0x64>;
+			interrupts = <51>;
+			dmas = <&sdma 13>;
+			dma-names = "rx";
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap2-uart";
+			ti,hwmods = "uart1";
+			reg = <0x4806a000 0x2000>;
+			interrupts = <72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap2-uart";
+			ti,hwmods = "uart2";
+			reg = <0x4806c000 0x400>;
+			interrupts = <73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+
+		uart3: serial@4806e000 {
+			compatible = "ti,omap2-uart";
+			ti,hwmods = "uart3";
+			reg = <0x4806e000 0x400>;
+			interrupts = <74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+
+		timer2: timer@4802a000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x4802a000 0x400>;
+			interrupts = <38>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48078000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48078000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@4807a000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x4807a000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@4807c000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x4807c000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4807e000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x4807e000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@48080000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48080000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@48082000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48082000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+		};
+
+		timer9: timer@48084000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48084000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@4808a000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x4808a000 0x400>;
+			interrupts = <48>;
+			ti,hwmods = "timer12";
+			ti,timer-pwm;
+		};
+
+		dss: dss@48050000 {
+			compatible = "ti,omap2-dss";
+			reg = <0x48050000 0x400>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@48050400 {
+				compatible = "ti,omap2-dispc";
+				reg = <0x48050400 0x400>;
+				interrupts = <25>;
+				ti,hwmods = "dss_dispc";
+			};
+
+			rfbi: encoder@48050800 {
+				compatible = "ti,omap2-rfbi";
+				reg = <0x48050800 0x400>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+			};
+
+			venc: encoder@48050c00 {
+				compatible = "ti,omap2-venc";
+				reg = <0x48050c00 0x400>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+			};
+		};
+	};
+};
diff --git a/src/arm/omap2420-clocks.dtsi b/src/arm/omap2420-clocks.dtsi
new file mode 100644
index 000000000000..ce8c742d7e92
--- /dev/null
+++ b/src/arm/omap2420-clocks.dtsi
@@ -0,0 +1,270 @@
+/*
+ * Device Tree Source for OMAP2420 clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&prcm_clocks {
+	sys_clkout2_src_gate: sys_clkout2_src_gate {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout2_src_mux: sys_clkout2_src_mux {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout2_src: sys_clkout2_src {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>;
+	};
+
+	sys_clkout2: sys_clkout2 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkout2_src>;
+		ti,bit-shift = <11>;
+		ti,max-div = <64>;
+		reg = <0x0070>;
+		ti,index-power-of-two;
+	};
+
+	dsp_gate_ick: dsp_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <1>;
+		reg = <0x0810>;
+	};
+
+	dsp_div_ick: dsp_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0840>;
+		ti,index-starts-at-one;
+	};
+
+	dsp_ick: dsp_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dsp_gate_ick>, <&dsp_div_ick>;
+	};
+
+	iva1_gate_ifck: iva1_gate_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0800>;
+	};
+
+	iva1_div_ifck: iva1_div_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0840>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
+	};
+
+	iva1_ifck: iva1_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>;
+	};
+
+	iva1_ifck_div: iva1_ifck_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&iva1_ifck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	iva1_mpu_int_ifck: iva1_mpu_int_ifck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&iva1_ifck_div>;
+		ti,bit-shift = <8>;
+		reg = <0x0800>;
+	};
+
+	wdt3_ick: wdt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <28>;
+		reg = <0x0210>;
+	};
+
+	wdt3_fck: wdt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <28>;
+		reg = <0x0200>;
+	};
+
+	mmc_ick: mmc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x0210>;
+	};
+
+	mmc_fck: mmc_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <26>;
+		reg = <0x0200>;
+	};
+
+	eac_ick: eac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0210>;
+	};
+
+	eac_fck: eac_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0200>;
+	};
+
+	i2c1_fck: i2c1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0200>;
+	};
+
+	i2c2_fck: i2c2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0200>;
+	};
+
+	vlynq_ick: vlynq_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0210>;
+	};
+
+	vlynq_gate_fck: vlynq_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0200>;
+	};
+
+	core_d18_ck: core_d18_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <18>;
+	};
+
+	vlynq_mux_fck: vlynq_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0240>;
+	};
+
+	vlynq_fck: vlynq_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>;
+	};
+};
+
+&prcm_clockdomains {
+	gfx_clkdm: gfx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_ick>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
+			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
+			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>;
+	};
+
+	iva1_clkdm: iva1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&iva1_mpu_int_ifck>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_ick>, <&dss_54m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
+			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
+			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
+			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>,
+			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
+			 <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>,
+			 <&uart3_ick>, <&uart3_fck>, <&cam_ick>,
+			 <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>,
+			 <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>,
+			 <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>,
+			 <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>,
+			 <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>,
+			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
+			 <&pka_ick>;
+	};
+};
+
+&func_96m_ck {
+	compatible = "fixed-factor-clock";
+	clocks = <&apll96_ck>;
+	clock-mult = <1>;
+	clock-div = <1>;
+};
+
+&dsp_div_fck {
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>;
+};
+
+&ssi_ssr_sst_div_fck {
+	ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+};
diff --git a/src/arm/omap2420-h4.dts b/src/arm/omap2420-h4.dts
new file mode 100644
index 000000000000..34cdecb4fdda
--- /dev/null
+++ b/src/arm/omap2420-h4.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap2420.dtsi"
+
+/ {
+	model = "TI OMAP2420 H4 board";
+	compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x4000000>; /* 64 MB */
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x08000000 0x04000000>;
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		linux,mtd-name= "intel,ge28f256l18b85";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x04000000>;
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <160>;
+		gpmc,cs-wr-off-ns = <160>;
+		gpmc,adv-on-ns = <20>;
+		gpmc,adv-rd-off-ns = <50>;
+		gpmc,adv-wr-off-ns = <50>;
+		gpmc,oe-on-ns = <60>;
+		gpmc,oe-off-ns = <120>;
+		gpmc,we-on-ns = <60>;
+		gpmc,we-off-ns = <120>;
+		gpmc,rd-cycle-ns = <170>;
+		gpmc,wr-cycle-ns = <170>;
+		gpmc,access-ns = <150>;
+		gpmc,page-burst-access-ns = <10>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0 0x20000>;
+		};
+		partition@20000 {
+			label = "params";
+			reg = <0x20000 0x20000>;
+		};
+		partition@40000 {
+			label = "kernel";
+			reg = <0x40000 0x200000>;
+		};
+		partition@240000 {
+			label = "file-system";
+			reg = <0x240000 0x3dc0000>;
+		};
+	};
+};
diff --git a/src/arm/omap2420-n800.dts b/src/arm/omap2420-n800.dts
new file mode 100644
index 000000000000..d8c1b423606a
--- /dev/null
+++ b/src/arm/omap2420-n800.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+	model = "Nokia N800";
+	compatible = "nokia,n800", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+};
diff --git a/src/arm/omap2420-n810-wimax.dts b/src/arm/omap2420-n810-wimax.dts
new file mode 100644
index 000000000000..6b25b0359ac9
--- /dev/null
+++ b/src/arm/omap2420-n810-wimax.dts
@@ -0,0 +1,8 @@
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+	model = "Nokia N810 WiMax";
+	compatible = "nokia,n810-wimax", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+};
diff --git a/src/arm/omap2420-n810.dts b/src/arm/omap2420-n810.dts
new file mode 100644
index 000000000000..b604d26bd48c
--- /dev/null
+++ b/src/arm/omap2420-n810.dts
@@ -0,0 +1,15 @@
+/dts-v1/;
+
+#include "omap2420-n8x0-common.dtsi"
+
+/ {
+	model = "Nokia N810";
+	compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
+};
+
+&i2c2 {
+	aic3x@18 {
+		compatible = "tlv320aic3x";
+		reg = <0x18>;
+	};
+};
diff --git a/src/arm/omap2420-n8x0-common.dtsi b/src/arm/omap2420-n8x0-common.dtsi
new file mode 100644
index 000000000000..c9f1e93a95ae
--- /dev/null
+++ b/src/arm/omap2420-n8x0-common.dtsi
@@ -0,0 +1,105 @@
+#include "omap2420.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128 MB */
+	};
+
+	ocp {
+		i2c@0 {
+			compatible = "i2c-cbus-gpio";
+			gpios = <&gpio3 2 0 /* gpio66 clk */
+				 &gpio3 1 0 /* gpio65 dat */
+				 &gpio3 0 0 /* gpio64 sel */
+				>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			retu_mfd: retu@1 {
+				compatible = "retu-mfd";
+				interrupt-parent = <&gpio4>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+				reg = <0x1>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+
+	pmic@72 {
+		compatible = "menelaus";
+		reg = <0x72>;
+		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
+
+	/* gpio-irq for dma: 26 */
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		gpmc,sync-read;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <127>;
+		gpmc,cs-wr-off-ns = <109>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <18>;
+		gpmc,adv-wr-off-ns = <18>;
+		gpmc,oe-on-ns = <27>;
+		gpmc,oe-off-ns = <127>;
+		gpmc,we-on-ns = <27>;
+		gpmc,we-off-ns = <72>;
+		gpmc,rd-cycle-ns = <145>;
+		gpmc,wr-cycle-ns = <136>;
+		gpmc,access-ns = <118>;
+		gpmc,page-burst-access-ns = <27>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <9>;
+		gpmc,sync-clk-ps = <27000>;
+
+		/* MTD partition table corresponding to old board-n8x0 file. */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00020000>;
+			read-only;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00020000 0x00060000>;
+		};
+		partition@2 {
+			label = "kernel";
+			reg = <0x00080000 0x00200000>;
+		};
+		partition@3 {
+			label = "initfs";
+			reg = <0x00280000 0x00400000>;
+		};
+		partition@4 {
+			label = "rootfs";
+			reg = <0x00680000 0x0f980000>;
+		};
+		partition@5 {
+			label = "omap2-onenand";
+			reg = <0x00000000 0x10000000>;
+		};
+	};
+};
diff --git a/src/arm/omap2420.dtsi b/src/arm/omap2420.dtsi
new file mode 100644
index 000000000000..e2b2e93d7b61
--- /dev/null
+++ b/src/arm/omap2420.dtsi
@@ -0,0 +1,198 @@
+/*
+ * Device Tree Source for OMAP2420 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap2.dtsi"
+
+/ {
+	compatible = "ti,omap2420", "ti,omap2";
+
+	ocp {
+		prcm: prcm@48008000 {
+			compatible = "ti,omap2-prcm";
+			reg = <0x48008000 0x1000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@48000000 {
+			compatible = "ti,omap2-scrm";
+			reg = <0x48000000 0x1000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		counter32k: counter@48004000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x48004000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
+		omap2420_pmx: pinmux@48000030 {
+			compatible = "ti,omap2420-padconf", "pinctrl-single";
+			reg = <0x48000030 0x0113>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <8>;
+			pinctrl-single,function-mask = <0x3f>;
+		};
+
+		gpio1: gpio@48018000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x48018000 0x200>;
+			interrupts = <29>;
+			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio2: gpio@4801a000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4801a000 0x200>;
+			interrupts = <30>;
+			ti,hwmods = "gpio2";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio3: gpio@4801c000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4801c000 0x200>;
+			interrupts = <31>;
+			ti,hwmods = "gpio3";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio4: gpio@4801e000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4801e000 0x200>;
+			interrupts = <32>;
+			ti,hwmods = "gpio4";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpmc: gpmc@6800a000 {
+			compatible = "ti,omap2420-gpmc";
+			reg = <0x6800a000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <20>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap2420-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <59>, /* TX interrupt */
+				     <60>; /* RX interrupt */
+			interrupt-names = "tx", "rx";
+			ti,hwmods = "mcbsp1";
+			dmas = <&sdma 31>,
+			       <&sdma 32>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp2: mcbsp@48076000 {
+			compatible = "ti,omap2420-mcbsp";
+			reg = <0x48076000 0xff>;
+			reg-names = "mpu";
+			interrupts = <62>, /* TX interrupt */
+				     <63>; /* RX interrupt */
+			interrupt-names = "tx", "rx";
+			ti,hwmods = "mcbsp2";
+			dmas = <&sdma 33>,
+			       <&sdma 34>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		msdi1: mmc@4809c000 {
+			compatible = "ti,omap2420-mmc";
+			ti,hwmods = "msdi1";
+			reg = <0x4809c000 0x80>;
+			interrupts = <83>;
+			dmas = <&sdma 61 &sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>, <34>;
+			interrupt-names = "dsp", "iva";
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <6>;
+			mbox_dsp: dsp {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <1 0 0>;
+			};
+			mbox_iva: iva {
+				ti,mbox-tx = <2 1 3>;
+				ti,mbox-rx = <3 1 3>;
+			};
+		};
+
+		timer1: timer@48028000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x48028000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		wd_timer2: wdt@48022000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x48022000 0x80>;
+		};
+	};
+};
+
+&i2c1 {
+	compatible = "ti,omap2420-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2420-i2c";
+};
+
+/include/ "omap24xx-clocks.dtsi"
+/include/ "omap2420-clocks.dtsi"
diff --git a/src/arm/omap2430-clocks.dtsi b/src/arm/omap2430-clocks.dtsi
new file mode 100644
index 000000000000..805f75df1cf2
--- /dev/null
+++ b/src/arm/omap2430-clocks.dtsi
@@ -0,0 +1,344 @@
+/*
+ * Device Tree Source for OMAP2430 clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&scrm_clocks {
+	mcbsp3_mux_fck: mcbsp3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		reg = <0x02e8>;
+	};
+
+	mcbsp3_fck: mcbsp3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+	};
+
+	mcbsp4_mux_fck: mcbsp4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x02e8>;
+	};
+
+	mcbsp4_fck: mcbsp4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+	};
+
+	mcbsp5_mux_fck: mcbsp5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x02e8>;
+	};
+
+	mcbsp5_fck: mcbsp5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+	};
+};
+
+&prcm_clocks {
+	iva2_1_gate_ick: iva2_1_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0800>;
+	};
+
+	iva2_1_div_ick: iva2_1_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dsp_fck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0840>;
+		ti,index-starts-at-one;
+	};
+
+	iva2_1_ick: iva2_1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>;
+	};
+
+	mdm_gate_ick: mdm_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0c10>;
+	};
+
+	mdm_div_ick: mdm_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		reg = <0x0c40>;
+		ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>;
+	};
+
+	mdm_ick: mdm_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mdm_gate_ick>, <&mdm_div_ick>;
+	};
+
+	mdm_osc_ck: mdm_osc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&osc_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0c00>;
+	};
+
+	mcbsp3_ick: mcbsp3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0214>;
+	};
+
+	mcbsp3_gate_fck: mcbsp3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <3>;
+		reg = <0x0204>;
+	};
+
+	mcbsp4_ick: mcbsp4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0214>;
+	};
+
+	mcbsp4_gate_fck: mcbsp4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x0204>;
+	};
+
+	mcbsp5_ick: mcbsp5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0214>;
+	};
+
+	mcbsp5_gate_fck: mcbsp5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <5>;
+		reg = <0x0204>;
+	};
+
+	mcspi3_ick: mcspi3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0214>;
+	};
+
+	mcspi3_fck: mcspi3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0204>;
+	};
+
+	icr_ick: icr_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0410>;
+	};
+
+	i2chs1_fck: i2chs1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2430-interface-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0204>;
+	};
+
+	i2chs2_fck: i2chs2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2430-interface-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0204>;
+	};
+
+	usbhs_ick: usbhs_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0214>;
+	};
+
+	mmchs1_ick: mmchs1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0214>;
+	};
+
+	mmchs1_fck: mmchs1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0204>;
+	};
+
+	mmchs2_ick: mmchs2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0214>;
+	};
+
+	mmchs2_fck: mmchs2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0204>;
+	};
+
+	gpio5_ick: gpio5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0214>;
+	};
+
+	gpio5_fck: gpio5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0204>;
+	};
+
+	mdm_intc_ick: mdm_intc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0214>;
+	};
+
+	mmchsdb1_fck: mmchsdb1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0204>;
+	};
+
+	mmchsdb2_fck: mmchsdb2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0204>;
+	};
+};
+
+&prcm_clockdomains {
+	gfx_clkdm: gfx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_ick>;
+	};
+
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>,
+			 <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>,
+			 <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>,
+			 <&icr_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_ick>, <&dss_54m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>,
+			 <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>,
+			 <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>,
+			 <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>,
+			 <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>,
+			 <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>,
+			 <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>,
+			 <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>,
+			 <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>,
+			 <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>,
+			 <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>,
+			 <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>,
+			 <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>,
+			 <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>,
+			 <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>,
+			 <&mmchsdb2_fck>;
+	};
+
+	mdm_clkdm: mdm_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mdm_osc_ck>;
+	};
+};
+
+&func_96m_ck {
+	compatible = "ti,mux-clock";
+	clocks = <&apll96_ck>, <&alt_ck>;
+	ti,bit-shift = <4>;
+	reg = <0x0540>;
+};
+
+&dsp_div_fck {
+	ti,max-div = <4>;
+	ti,index-starts-at-one;
+};
+
+&ssi_ssr_sst_div_fck {
+	ti,max-div = <5>;
+	ti,index-starts-at-one;
+};
diff --git a/src/arm/omap2430-sdp.dts b/src/arm/omap2430-sdp.dts
new file mode 100644
index 000000000000..6b36ede58488
--- /dev/null
+++ b/src/arm/omap2430-sdp.dts
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap2430.dtsi"
+
+/ {
+	model = "TI OMAP2430 SDP";
+	compatible = "ti,omap2430-sdp", "ti,omap2430", "ti,omap2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128 MB */
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	};
+};
+
+#include "twl4030.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+&gpmc {
+	ranges = <5 0 0x08000000 0x01000000>;
+	ethernet@gpmc {
+		compatible = "smsc,lan91c94";
+		interrupt-parent = <&gpio5>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;	/* gpio149 */
+		reg = <5 0x300 0xf>;
+		bank-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,mux-add-data = <2>;
+		gpmc,device-width = <1>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cs-on-ns = <6>;
+		gpmc,cs-rd-off-ns = <187>;
+		gpmc,cs-wr-off-ns = <187>;
+		gpmc,adv-on-ns = <18>;
+		gpmc,adv-rd-off-ns = <48>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <60>;
+		gpmc,oe-off-ns = <169>;
+		gpmc,we-on-ns = <66>;
+		gpmc,we-off-ns = <169>;
+		gpmc,rd-cycle-ns = <187>;
+		gpmc,wr-cycle-ns = <187>;
+		gpmc,access-ns = <187>;
+		gpmc,page-burst-access-ns = <24>;
+		gpmc,bus-turnaround-ns = <24>;
+		gpmc,cycle2cycle-delay-ns = <24>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+	};
+};
+
diff --git a/src/arm/omap2430.dtsi b/src/arm/omap2430.dtsi
new file mode 100644
index 000000000000..0dc8de2782b1
--- /dev/null
+++ b/src/arm/omap2430.dtsi
@@ -0,0 +1,300 @@
+/*
+ * Device Tree Source for OMAP243x SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap2.dtsi"
+
+/ {
+	compatible = "ti,omap2430", "ti,omap2";
+
+	ocp {
+		prcm: prcm@49006000 {
+			compatible = "ti,omap2-prcm";
+			reg = <0x49006000 0x1000>;
+
+			prcm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prcm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@49002000 {
+			compatible = "ti,omap2-scrm";
+			reg = <0x49002000 0x1000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		counter32k: counter@49020000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x49020000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
+		omap2430_pmx: pinmux@49002030 {
+			compatible = "ti,omap2430-padconf", "pinctrl-single";
+			reg = <0x49002030 0x0154>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,register-width = <8>;
+			pinctrl-single,function-mask = <0x3f>;
+		};
+
+		omap2_scm_general: tisyscon@49002270 {
+			compatible = "syscon";
+			reg = <0x49002270 0x240>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x230 0x4>;
+			syscon = <&omap2_scm_general>;
+			pbias_mmc_reg: pbias_mmc_omap2430 {
+				regulator-name = "pbias_mmc_omap2430";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
+		gpio1: gpio@4900c000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4900c000 0x200>;
+			interrupts = <29>;
+			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio2: gpio@4900e000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x4900e000 0x200>;
+			interrupts = <30>;
+			ti,hwmods = "gpio2";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio3: gpio@49010000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x49010000 0x200>;
+			interrupts = <31>;
+			ti,hwmods = "gpio3";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio4: gpio@49012000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x49012000 0x200>;
+			interrupts = <32>;
+			ti,hwmods = "gpio4";
+			ti,gpio-always-on;
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpio5: gpio@480b6000 {
+			compatible = "ti,omap2-gpio";
+			reg = <0x480b6000 0x200>;
+			interrupts = <33>;
+			ti,hwmods = "gpio5";
+			#gpio-cells = <2>;
+			gpio-controller;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+		};
+
+		gpmc: gpmc@6e000000 {
+			compatible = "ti,omap2430-gpmc";
+			reg = <0x6e000000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <20>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <64>, /* OCP compliant interrupt */
+				     <59>, /* TX interrupt */
+				     <60>, /* RX interrupt */
+				     <61>; /* RX overflow interrupt */
+			interrupt-names = "common", "tx", "rx", "rx_overflow";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+			dmas = <&sdma 31>,
+			       <&sdma 32>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp2: mcbsp@48076000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48076000 0xff>;
+			reg-names = "mpu";
+			interrupts = <16>, /* OCP compliant interrupt */
+				     <62>, /* TX interrupt */
+				     <63>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+			dmas = <&sdma 33>,
+			       <&sdma 34>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp3: mcbsp@4808c000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x4808c000 0xff>;
+			reg-names = "mpu";
+			interrupts = <17>, /* OCP compliant interrupt */
+				     <89>, /* TX interrupt */
+				     <90>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+			dmas = <&sdma 17>,
+			       <&sdma 18>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp4: mcbsp@4808e000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x4808e000 0xff>;
+			reg-names = "mpu";
+			interrupts = <18>, /* OCP compliant interrupt */
+				     <54>, /* TX interrupt */
+				     <55>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+			dmas = <&sdma 19>,
+			       <&sdma 20>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp5: mcbsp@48096000 {
+			compatible = "ti,omap2430-mcbsp";
+			reg = <0x48096000 0xff>;
+			reg-names = "mpu";
+			interrupts = <19>, /* OCP compliant interrupt */
+				     <81>, /* TX interrupt */
+				     <82>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp5";
+			dmas = <&sdma 21>,
+			       <&sdma 22>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
+			ti,hwmods = "mmc2";
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <6>;
+			mbox_dsp: dsp {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <1 0 0>;
+			};
+		};
+
+		timer1: timer@49018000 {
+			compatible = "ti,omap2420-timer";
+			reg = <0x49018000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		mcspi3: mcspi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi3";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
+			dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		usb_otg_hs: usb_otg_hs@480ac000 {
+			compatible = "ti,omap2-musb";
+			ti,hwmods = "usb_otg_hs";
+			reg = <0x480ac000 0x1000>;
+			interrupts = <93>;
+		};
+
+		wd_timer2: wdt@49016000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x49016000 0x80>;
+		};
+	};
+};
+
+&i2c1 {
+	compatible = "ti,omap2430-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2430-i2c";
+};
+
+/include/ "omap24xx-clocks.dtsi"
+/include/ "omap2430-clocks.dtsi"
diff --git a/src/arm/omap24xx-clocks.dtsi b/src/arm/omap24xx-clocks.dtsi
new file mode 100644
index 000000000000..a1365ca926eb
--- /dev/null
+++ b/src/arm/omap24xx-clocks.dtsi
@@ -0,0 +1,1244 @@
+/*
+ * Device Tree Source for OMAP24xx clock data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scrm_clocks {
+	mcbsp1_mux_fck: mcbsp1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x0274>;
+	};
+
+	mcbsp1_fck: mcbsp1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+	};
+
+	mcbsp2_mux_fck: mcbsp2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_96m_ck>, <&mcbsp_clks>;
+		ti,bit-shift = <6>;
+		reg = <0x0274>;
+	};
+
+	mcbsp2_fck: mcbsp2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+	};
+};
+
+&prcm_clocks {
+	func_32k_ck: func_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	secure_32k_ck: secure_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12m_ck: virt_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13m_ck: virt_13m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26m_ck: virt_26m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	aplls_clkin_ck: aplls_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0540>;
+	};
+
+	aplls_clkin_x2_ck: aplls_clkin_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&aplls_clkin_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	osc_ck: osc_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0060>;
+		ti,index-starts-at-one;
+	};
+
+	sys_ck: sys_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&osc_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x0060>;
+		ti,index-starts-at-one;
+	};
+
+	alt_ck: alt_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <54000000>;
+	};
+
+	mcbsp_clks: mcbsp_clks {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	dpll_ck: dpll_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0500>, <0x0540>;
+	};
+
+	apll96_ck: apll96_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		ti,idlest-shift = <8>;
+		ti,clock-frequency = <96000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
+
+	apll54_ck: apll54_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap2-apll-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		ti,idlest-shift = <9>;
+		ti,clock-frequency = <54000000>;
+		reg = <0x0500>, <0x0530>, <0x0520>;
+	};
+
+	func_54m_ck: func_54m_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&apll54_ck>, <&alt_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0540>;
+	};
+
+	core_ck: core_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	func_96m_ck: func_96m_ck {
+		#clock-cells = <0>;
+	};
+
+	apll96_d2_ck: apll96_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&apll96_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_48m_ck: func_48m_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&apll96_d2_ck>, <&alt_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0540>;
+	};
+
+	func_12m_ck: func_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&func_48m_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	sys_clkout_src_gate: sys_clkout_src_gate {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout_src_mux: sys_clkout_src_mux {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>;
+		reg = <0x0070>;
+	};
+
+	sys_clkout_src: sys_clkout_src {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>;
+	};
+
+	sys_clkout: sys_clkout {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkout_src>;
+		ti,bit-shift = <3>;
+		ti,max-div = <64>;
+		reg = <0x0070>;
+		ti,index-power-of-two;
+	};
+
+	emul_ck: emul_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_54m_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0078>;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <31>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+	};
+
+	dsp_gate_fck: dsp_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0800>;
+	};
+
+	dsp_div_fck: dsp_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		reg = <0x0840>;
+	};
+
+	dsp_fck: dsp_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dsp_gate_fck>, <&dsp_div_fck>;
+	};
+
+	core_l3_ck: core_l3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <31>;
+		reg = <0x0240>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_3d_gate_fck: gfx_3d_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0300>;
+	};
+
+	gfx_3d_div_fck: gfx_3d_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,max-div = <4>;
+		reg = <0x0340>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_3d_fck: gfx_3d_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>;
+	};
+
+	gfx_2d_gate_fck: gfx_2d_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0300>;
+	};
+
+	gfx_2d_div_fck: gfx_2d_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,max-div = <4>;
+		reg = <0x0340>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_2d_fck: gfx_2d_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>;
+	};
+
+	gfx_ick: gfx_ick {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0310>;
+	};
+
+	l4_ck: l4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <5>;
+		ti,max-div = <3>;
+		reg = <0x0240>;
+		ti,index-starts-at-one;
+	};
+
+	dss_ick: dss_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0210>;
+	};
+
+	dss1_gate_fck: dss1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0200>;
+	};
+
+	core_d2_ck: core_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	core_d3_ck: core_d3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	core_d4_ck: core_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	core_d5_ck: core_d5_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <5>;
+	};
+
+	core_d6_ck: core_d6_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	core_d8_ck: core_d8_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	core_d9_ck: core_d9_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <9>;
+	};
+
+	core_d12_ck: core_d12_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <12>;
+	};
+
+	core_d16_ck: core_d16_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dss1_mux_fck: dss1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0240>;
+	};
+
+	dss1_fck: dss1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dss1_gate_fck>, <&dss1_mux_fck>;
+	};
+
+	dss2_gate_fck: dss2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0200>;
+	};
+
+	dss2_mux_fck: dss2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&func_48m_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0240>;
+	};
+
+	dss2_fck: dss2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dss2_gate_fck>, <&dss2_mux_fck>;
+	};
+
+	dss_54m_fck: dss_54m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_54m_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0200>;
+	};
+
+	ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0204>;
+	};
+
+	ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0240>;
+	};
+
+	ssi_ssr_sst_fck: ssi_ssr_sst_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>;
+	};
+
+	usb_l4_gate_ick: usb_l4_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0214>;
+	};
+
+	usb_l4_div_ick: usb_l4_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&core_l3_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0240>;
+		ti,dividers = <0>, <1>, <2>, <0>, <4>;
+	};
+
+	usb_l4_ick: usb_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0214>;
+	};
+
+	gpt1_ick: gpt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0410>;
+	};
+
+	gpt1_gate_fck: gpt1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0400>;
+	};
+
+	gpt1_mux_fck: gpt1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		reg = <0x0440>;
+	};
+
+	gpt1_fck: gpt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+	};
+
+	gpt2_ick: gpt2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0210>;
+	};
+
+	gpt2_gate_fck: gpt2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0200>;
+	};
+
+	gpt2_mux_fck: gpt2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0244>;
+	};
+
+	gpt2_fck: gpt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+	};
+
+	gpt3_ick: gpt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0210>;
+	};
+
+	gpt3_gate_fck: gpt3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0200>;
+	};
+
+	gpt3_mux_fck: gpt3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0244>;
+	};
+
+	gpt3_fck: gpt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+	};
+
+	gpt4_ick: gpt4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0210>;
+	};
+
+	gpt4_gate_fck: gpt4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0200>;
+	};
+
+	gpt4_mux_fck: gpt4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0244>;
+	};
+
+	gpt4_fck: gpt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+	};
+
+	gpt5_ick: gpt5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0210>;
+	};
+
+	gpt5_gate_fck: gpt5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0200>;
+	};
+
+	gpt5_mux_fck: gpt5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0244>;
+	};
+
+	gpt5_fck: gpt5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+	};
+
+	gpt6_ick: gpt6_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0210>;
+	};
+
+	gpt6_gate_fck: gpt6_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0200>;
+	};
+
+	gpt6_mux_fck: gpt6_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0244>;
+	};
+
+	gpt6_fck: gpt6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+	};
+
+	gpt7_ick: gpt7_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0210>;
+	};
+
+	gpt7_gate_fck: gpt7_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0200>;
+	};
+
+	gpt7_mux_fck: gpt7_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0244>;
+	};
+
+	gpt7_fck: gpt7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+	};
+
+	gpt8_ick: gpt8_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0210>;
+	};
+
+	gpt8_gate_fck: gpt8_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0200>;
+	};
+
+	gpt8_mux_fck: gpt8_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0244>;
+	};
+
+	gpt8_fck: gpt8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+	};
+
+	gpt9_ick: gpt9_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0210>;
+	};
+
+	gpt9_gate_fck: gpt9_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0200>;
+	};
+
+	gpt9_mux_fck: gpt9_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0244>;
+	};
+
+	gpt9_fck: gpt9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+	};
+
+	gpt10_ick: gpt10_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0210>;
+	};
+
+	gpt10_gate_fck: gpt10_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0200>;
+	};
+
+	gpt10_mux_fck: gpt10_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0244>;
+	};
+
+	gpt10_fck: gpt10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+	};
+
+	gpt11_ick: gpt11_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0210>;
+	};
+
+	gpt11_gate_fck: gpt11_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x0200>;
+	};
+
+	gpt11_mux_fck: gpt11_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0244>;
+	};
+
+	gpt11_fck: gpt11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+	};
+
+	gpt12_ick: gpt12_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0210>;
+	};
+
+	gpt12_gate_fck: gpt12_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x0200>;
+	};
+
+	gpt12_mux_fck: gpt12_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0244>;
+	};
+
+	gpt12_fck: gpt12_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>;
+	};
+
+	mcbsp1_ick: mcbsp1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <15>;
+		reg = <0x0210>;
+	};
+
+	mcbsp1_gate_fck: mcbsp1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <15>;
+		reg = <0x0200>;
+	};
+
+	mcbsp2_ick: mcbsp2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x0210>;
+	};
+
+	mcbsp2_gate_fck: mcbsp2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <16>;
+		reg = <0x0200>;
+	};
+
+	mcspi1_ick: mcspi1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0210>;
+	};
+
+	mcspi1_fck: mcspi1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <17>;
+		reg = <0x0200>;
+	};
+
+	mcspi2_ick: mcspi2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0210>;
+	};
+
+	mcspi2_fck: mcspi2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <18>;
+		reg = <0x0200>;
+	};
+
+	uart1_ick: uart1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0210>;
+	};
+
+	uart1_fck: uart1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0200>;
+	};
+
+	uart2_ick: uart2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0210>;
+	};
+
+	uart2_fck: uart2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0200>;
+	};
+
+	uart3_ick: uart3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	uart3_fck: uart3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0204>;
+	};
+
+	gpios_ick: gpios_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0410>;
+	};
+
+	gpios_fck: gpios_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0400>;
+	};
+
+	mpu_wdt_ick: mpu_wdt_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0410>;
+	};
+
+	mpu_wdt_fck: mpu_wdt_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0400>;
+	};
+
+	sync_32k_ick: sync_32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0410>;
+	};
+
+	wdt1_ick: wdt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x0410>;
+	};
+
+	omapctrl_ick: omapctrl_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x0410>;
+	};
+
+	cam_fck: cam_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0200>;
+	};
+
+	cam_ick: cam_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0210>;
+	};
+
+	mailboxes_ick: mailboxes_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <30>;
+		reg = <0x0210>;
+	};
+
+	wdt4_ick: wdt4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0210>;
+	};
+
+	wdt4_fck: wdt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_32k_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0200>;
+	};
+
+	mspro_ick: mspro_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x0210>;
+	};
+
+	mspro_fck: mspro_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_96m_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x0200>;
+	};
+
+	fac_ick: fac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0210>;
+	};
+
+	fac_fck: fac_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x0200>;
+	};
+
+	hdq_ick: hdq_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0210>;
+	};
+
+	hdq_fck: hdq_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_12m_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x0200>;
+	};
+
+	i2c1_ick: i2c1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <19>;
+		reg = <0x0210>;
+	};
+
+	i2c2_ick: i2c2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x0210>;
+	};
+
+	gpmc_fck: gpmc_fck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <1>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	sdma_fck: sdma_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sdma_ick: sdma_ick {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <0>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	sdrc_ick: sdrc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&core_l3_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <2>;
+		reg = <0x0238>;
+		ti,clock-mult = <1>;
+	};
+
+	des_ick: des_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x021c>;
+	};
+
+	sha_ick: sha_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x021c>;
+	};
+
+	rng_ick: rng_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+
+	aes_ick: aes_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x021c>;
+	};
+
+	pka_ick: pka_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l4_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x021c>;
+	};
+
+	usb_fck: usb_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&func_48m_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0204>;
+	};
+};
diff --git a/src/arm/omap3-beagle-xm-ab.dts b/src/arm/omap3-beagle-xm-ab.dts
new file mode 100644
index 000000000000..7ac3bcf59d59
--- /dev/null
+++ b/src/arm/omap3-beagle-xm-ab.dts
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-beagle-xm.dts"
+
+/ {
+	/* HS USB Port 2 Power enable was inverted with the xM C */
+	hsusb2_power: hsusb2_power_reg {
+		enable-active-high;
+	};
+};
diff --git a/src/arm/omap3-beagle-xm.dts b/src/arm/omap3-beagle-xm.dts
new file mode 100644
index 000000000000..25f7b0a22114
--- /dev/null
+++ b/src/arm/omap3-beagle-xm.dts
@@ -0,0 +1,394 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard xM";
+	compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			pwms = <&twl_pwmled 1 7812500>;
+			max-brightness = <127>;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x114>;
+			gpio-key,wakeup;
+		};
+
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
+		vcc-supply = <&hsusb2_power>;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+		/* XXX pinctrl from twl */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector@1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+
+	etb@5401b000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x5401b000 0x1000>;
+
+		coresight-default-sink;
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etb_in: endpoint {
+				slave-mode;
+				remote-endpoint = <&etm_out>;
+			};
+		};
+	};
+
+	etm@54010000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x54010000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etm_out: endpoint {
+				remote-endpoint = <&etb_in>;
+			};
+		};
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
+		>;
+	};
+
+	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+		>;
+	};
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+
+		twl_power: power {
+			compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
+			ti,use_poweroff;
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&vaux2 {
+	regulator-name = "usb_1v8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins1
+		&dss_dpi_pins2
+	>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
diff --git a/src/arm/omap3-beagle.dts b/src/arm/omap3-beagle.dts
new file mode 100644
index 000000000000..c792391ef090
--- /dev/null
+++ b/src/arm/omap3-beagle.dts
@@ -0,0 +1,381 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard";
+	compatible = "ti,omap3-beagle", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+		};
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;	/* gpio_147 */
+		vcc-supply = <&hsusb2_power>;
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x114>;
+			gpio-key,wakeup;
+		};
+
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;	/* gpio_170 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tv0: connector@1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+
+	etb@540000000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x5401b000 0x1000>;
+
+		coresight-default-sink;
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etb_in: endpoint {
+				slave-mode;
+				remote-endpoint = <&etm_out>;
+			};
+		};
+	};
+
+	etm@54010000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x54010000 0x1000>;
+
+		clocks = <&emu_src_ck>;
+		clock-names = "apb_pclk";
+		port {
+			etm_out: endpoint {
+				remote-endpoint = <&etb_in>;
+			};
+		};
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			0x194 (PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&vaux2 {
+	regulator-name = "vdd_ehci";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
diff --git a/src/arm/omap3-cm-t3517.dts b/src/arm/omap3-cm-t3517.dts
new file mode 100644
index 000000000000..0ab748cf7749
--- /dev/null
+++ b/src/arm/omap3-cm-t3517.dts
@@ -0,0 +1,147 @@
+/*
+ * Support for CompuLab CM-T3517
+ */
+/dts-v1/;
+
+#include "am3517.dtsi"
+#include "omap3-cm-t3x.dtsi"
+
+/ {
+	model = "CompuLab CM-T3517";
+	compatible = "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+	vmmc:  regulator-vmmc {
+                compatible = "regulator-fixed";
+                regulator-name = "vmmc";
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+        };
+
+	wl12xx_vmmc2: wl12xx_vmmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vw1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+				&wl12xx_wkup_pins
+				&wl12xx_core_pins
+			    >;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 6 GPIO_ACTIVE_HIGH >; /* gpio6 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	wl12xx_vaux2: wl12xx_vaux2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271_vaux2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&omap3_pmx_wkup {
+
+	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4)	/* sys_boot2.gpio_4 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE4)	/* sys_boot4.gpio_6 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+
+	phy1_reset_pins: pinmux_hsusb1_phy_reset_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE4)	/* uart2_tx.gpio_146 */
+		>;
+	};
+
+	phy2_reset_pins: pinmux_hsusb2_phy_reset_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217a, PIN_OUTPUT | MUX_MODE4)	/* uart2_rx.gpio_147 */
+		>;
+	};
+
+	otg_drv_vbus: pinmux_otg_drv_vbus {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	wl12xx_core_pins: pinmux_wl12xx_core_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs5.gpio_56 */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	usb_hub_pins: pinmux_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2184, PIN_OUTPUT | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 - USB HUB RST */
+		>;
+	};
+};
+
+&hsusb1_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy1_reset_pins>;
+	reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+	pinctrl-names = "default";
+	pinctrl-0 = <&phy2_reset_pins>;
+	reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>;
+};
+
+&davinci_emac {
+	status = "okay";
+};
+
+&davinci_mdio {
+	status = "okay";
+};
+
+&am35x_otg_hs {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&otg_drv_vbus>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&wl12xx_vmmc2>;
+	vmmc_aux-supply = <&wl12xx_vaux2>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins_common
+		&dss_dpi_pins_cm_t35x
+	>;
+};
+
diff --git a/src/arm/omap3-cm-t3530.dts b/src/arm/omap3-cm-t3530.dts
new file mode 100644
index 000000000000..8dd14fcf6825
--- /dev/null
+++ b/src/arm/omap3-cm-t3530.dts
@@ -0,0 +1,59 @@
+/*
+ * Support for CompuLab CM-T3530
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-cm-t3x30.dtsi"
+
+/ {
+	model = "CompuLab CM-T3530";
+	compatible = "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+
+	/* Regulator to trigger the reset signal of the Wifi module */
+	mmc2_sdio_reset: regulator-mmc2-sdio-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-mmc2-sdio-reset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)		/* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)		/* sdmmc2_dat7.sdmmc2_clkin */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&mmc2_sdio_reset>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins_common
+		&dss_dpi_pins_cm_t35x
+	>;
+};
+
diff --git a/src/arm/omap3-cm-t3730.dts b/src/arm/omap3-cm-t3730.dts
new file mode 100644
index 000000000000..46eadb21b5ef
--- /dev/null
+++ b/src/arm/omap3-cm-t3730.dts
@@ -0,0 +1,87 @@
+/*
+ * Support for CompuLab CM-T3730
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-cm-t3x30.dtsi"
+
+/ {
+	model = "CompuLab CM-T3730";
+	compatible = "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
+
+	wl12xx_vmmc2: wl12xx_vmmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vw1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;   /* gpio73 */
+		startup-delay-us = <20000>;
+		enable-active-high;
+	};
+
+	wl12xx_vaux2: wl12xx_vaux2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271_vaux2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vaux2>;
+	};
+};
+
+&omap3_pmx_wkup {
+	dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)	/* dss_data3.gpio_73 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&wl12xx_vmmc2>;
+	vmmc_aux-supply = <&wl12xx_vaux2>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins_common
+		&dss_dpi_pins_cm_t3730
+	>;
+};
+
diff --git a/src/arm/omap3-cm-t3x.dtsi b/src/arm/omap3-cm-t3x.dtsi
new file mode 100644
index 000000000000..4d091ca43e25
--- /dev/null
+++ b/src/arm/omap3-cm-t3x.dtsi
@@ -0,0 +1,319 @@
+/*
+ * Common support for CompuLab CM-T3x CoMs
+ */
+
+/ {
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&green_led_pins>;
+		ledb {
+			label = "cm-t3x:green";
+			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;  /* gpio186 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* HS USB Port 1 Power */
+	hsusb1_power: hsusb1_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&hsusb1_power>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&hsusb2_power>;
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	tv0: connector@1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+};
+
+&omap3_pmx_core {
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT  | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	green_led_pins: pinmux_green_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4)	/* sys_clkout2.gpio_186 */
+		>;
+	};
+
+	dss_dpi_pins_common: pinmux_dss_dpi_pins_common {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx */
+		>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy &hsusb2_phy>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;			/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <25 0>;		/* gpio_57 */
+		pendown-gpio = <&gpio2 25 0>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		ti,debounce-max = /bits/ 16 <30>;
+		ti,debounce-tol = /bits/ 16 <10>;
+		ti,debounce-rep = /bits/ 16 <1>;
+
+		linux,wakeup;
+	};
+};
+
+&venc {
+	status = "ok";
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <2>;
+		};
+	};
+};
+
+&mcbsp2 {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x01000000>;
+
+	nand@0,0 {
+		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		ti,nand-ecc-opt = "sw";
+
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <120>;
+		gpmc,cs-wr-off-ns = <120>;
+
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <120>;
+		gpmc,adv-wr-off-ns = <120>;
+
+		gpmc,we-on-ns = <6>;
+		gpmc,we-off-ns = <90>;
+
+		gpmc,oe-on-ns = <6>;
+		gpmc,oe-off-ns = <90>;
+
+		gpmc,page-burst-access-ns = <6>;
+		gpmc,access-ns = <72>;
+		gpmc,cycle2cycle-delay-ns = <60>;
+
+		gpmc,rd-cycle-ns = <120>;
+		gpmc,wr-cycle-ns = <120>;
+		gpmc,wr-access-ns = <186>;
+		gpmc,wr-data-mux-bus-ns = <90>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "xloader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "uboot";
+			reg = <0x80000 0x1e0000>;
+		};
+		partition@0x260000 {
+			label = "uboot environment";
+			reg = <0x260000 0x40000>;
+		};
+		partition@0x2a0000 {
+			label = "linux";
+			reg = <0x2a0000 0x400000>;
+		};
+		partition@0x6a0000 {
+			label = "rootfs";
+			reg = <0x6a0000 0x1f880000>;
+		};
+	};
+};
diff --git a/src/arm/omap3-cm-t3x30.dtsi b/src/arm/omap3-cm-t3x30.dtsi
new file mode 100644
index 000000000000..d9e92b654f85
--- /dev/null
+++ b/src/arm/omap3-cm-t3x30.dtsi
@@ -0,0 +1,131 @@
+/*
+ * Common support for CompuLab CM-T3x30 CoMs
+ */
+
+#include "omap3-cm-t3x.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "cm-t35";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+};
+
+&omap3_pmx_core {
+
+	smsc1_pins: pinmux_smsc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs5.gpmc_ncs5 */
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)	/* uart3_cts_rctx.gpio_163 */
+		>;
+	};
+
+ 	hsusb0_pins: pinmux_hsusb0_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)		/* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data0.hsusb2_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+};
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x01000000>, /* CM-T3x30 SMSC9x Eth */
+		 <0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
+
+	smsc1: ethernet@gpmc {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc1_pins>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		reg = <5 0 0xff>;
+	};
+};
+
+&i2c1 {
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include <dt-bindings/input/input.h>
+
+&venc {
+	vdda-supply = <&vdac>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(0) */
+	ti,pullups = <0x000001>;
+};
+
+&twl_keypad {
+	linux,keymap = <
+				MATRIX_KEY(0x00, 0x01, KEY_A)
+				MATRIX_KEY(0x00, 0x02, KEY_B)
+				MATRIX_KEY(0x00, 0x03, KEY_LEFT)
+
+				MATRIX_KEY(0x01, 0x01, KEY_UP)
+				MATRIX_KEY(0x01, 0x02, KEY_ENTER)
+				MATRIX_KEY(0x01, 0x03, KEY_DOWN)
+
+				MATRIX_KEY(0x02, 0x01, KEY_RIGHT)
+				MATRIX_KEY(0x02, 0x02, KEY_C)
+				MATRIX_KEY(0x02, 0x03, KEY_D)
+			>;
+};
+
+&hsusb1_phy {
+	reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
+};
+
+&hsusb2_phy {
+	reset-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb0_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/src/arm/omap3-devkit8000.dts b/src/arm/omap3-devkit8000.dts
new file mode 100644
index 000000000000..169037e5ff53
--- /dev/null
+++ b/src/arm/omap3-devkit8000.dts
@@ -0,0 +1,158 @@
+/*
+ * Author: Anil Kumar <anilk4.v@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+/ {
+	model = "TimLL OMAP3 Devkit8000";
+	compatible = "timll,omap3-devkit8000", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;	/* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "devkit8000::led1";
+			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "devkit8000::led2";
+			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
+			default-state = "on";
+			linux,default-trigger = "none";
+		};
+
+		usr {
+			label = "devkit8000::led3";
+			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
+			default-state = "on";
+			linux,default-trigger = "usr";
+                };
+
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "devkit8000";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+		ti,audio-routing =
+			"Ext Spk", "PREDRIVEL",
+			"Ext Spk", "PREDRIVER",
+			"MAINMIC", "Main Mic",
+			"Main Mic", "Mic Bias 1";
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>;	/* SYS_NIRQ cascaded to intc */
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>;       /* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "U-Boot Env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x400000>;
+		};
+
+		filesystem@680000 {
+			label = "File System";
+			reg = <0x680000 0xf980000>;
+		};
+	};
+};
diff --git a/src/arm/omap3-evm-37xx.dts b/src/arm/omap3-evm-37xx.dts
new file mode 100644
index 000000000000..16e8ce350dda
--- /dev/null
+++ b/src/arm/omap3-evm-37xx.dts
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-evm-common.dtsi"
+
+
+/ {
+	model = "TI OMAP37XX EVM (TMDSEVM3730)";
+	compatible = "ti,omap3-evm-37xx", "ti,omap36xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&dss_dpi_pins1
+		&dss_dpi_pins2
+	>;
+};
+
+&omap3_pmx_core {
+	dss_dpi_pins1: pinmux_dss_dpi_pins2 {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3)   /* dss_data18.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3)   /* dss_data19.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3)   /* dss_data20.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3)   /* dss_data21.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3)   /* dss_data22.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3)   /* dss_data23.dss_data5 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat3.sdmmc1_dat3 */
+			0x120 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat4.sdmmc1_dat4 */
+			0x122 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat5.sdmmc1_dat5 */
+			0x124 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat6.sdmmc1_dat6 */
+			0x126 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	/* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x150 (PIN_OUTPUT | MUX_MODE4)		/* uart1_cts.gpio_150 */
+			0x14e (PIN_INPUT | MUX_MODE4)		/* uart1_rts.gpio_149 */
+		>;
+	};
+
+	smsc911x_pins: pinmux_smsc911x_pins {
+		pinctrl-single,pins = <
+			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	dss_dpi_pins2: pinmux_dss_dpi_pins1 {
+		pinctrl-single,pins = <
+			0x0a (PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
+			0x0c (PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
+			0x10 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
+			0x12 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
+			0x14 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
+			0x16 (PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x1000000>,	/* CS0: 16MB for NAND */
+		 <5 0 0x2c000000 0x01000000>;
+
+	nand@0,0 {
+		linux,mtd-name= "hynix,h8kds0un0mer-4em";
+		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x780000 0x1f880000>;
+		};
+	};
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc911x_pins>;
+	};
+};
diff --git a/src/arm/omap3-evm-common.dtsi b/src/arm/omap3-evm-common.dtsi
new file mode 100644
index 000000000000..127f3e7c10c4
--- /dev/null
+++ b/src/arm/omap3-evm-common.dtsi
@@ -0,0 +1,150 @@
+/*
+ * Common support for omap3 EVM boards
+ */
+
+#include <dt-bindings/input/input.h>
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		ledb {
+			label = "omap3evm::ledb";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 22 0>;	/* gpio150 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+	gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;
+};
+
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-omap3-evm", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&lcd_3v3 {
+	gpio = <&gpio5 25 GPIO_ACTIVE_LOW>;	/* gpio153 */
+	enable-active-low;
+};
+
+&lcd0 {
+	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
+	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
+	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
+		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
+		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 0>;		/* gpio175 */
+		pendown-gpio = <&gpio6 15 0>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&twl_keypad {
+	linux,keymap = <
+			MATRIX_KEY(2, 2, KEY_1)
+			MATRIX_KEY(1, 1, KEY_2)
+			MATRIX_KEY(0, 0, KEY_3)
+			MATRIX_KEY(3, 2, KEY_4)
+			MATRIX_KEY(2, 1, KEY_5)
+			MATRIX_KEY(1, 0, KEY_6)
+			MATRIX_KEY(1, 3, KEY_7)
+			MATRIX_KEY(3, 1, KEY_8)
+			MATRIX_KEY(2, 0, KEY_9)
+			MATRIX_KEY(2, 3, KEY_KPASTERISK)
+			MATRIX_KEY(0, 2, KEY_0)
+			MATRIX_KEY(3, 0, KEY_KPDOT)
+			/* s4 not wired */
+			MATRIX_KEY(1, 2, KEY_BACKSPACE)
+			MATRIX_KEY(0, 1, KEY_ENTER)
+			>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ethernet@gpmc {
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 8>;
+		reg = <5 0 0xff>;
+	};
+};
diff --git a/src/arm/omap3-evm.dts b/src/arm/omap3-evm.dts
new file mode 100644
index 000000000000..e10dcd0fa539
--- /dev/null
+++ b/src/arm/omap3-evm.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-evm-common.dtsi"
+
+/ {
+	model = "TI OMAP35XX EVM (TMDSEVM3530)";
+	compatible = "ti,omap3-evm", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+};
diff --git a/src/arm/omap3-gta04.dtsi b/src/arm/omap3-gta04.dtsi
new file mode 100644
index 000000000000..fb3a69604ed5
--- /dev/null
+++ b/src/arm/omap3-gta04.dtsi
@@ -0,0 +1,520 @@
+/*
+ * Copyright (C) 2013 Marek Belisko <marek@goldelico.com>
+ *
+ * Based on omap3-beagle-xm.dts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "OMAP3 GTA04";
+	compatible = "ti,omap3-gta04", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	aliases {
+		display0 = &lcd;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		aux-button {
+			label = "aux";
+			linux,code = <169>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			gpio-key,wakeup;
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "gta04";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	spi_lcd {
+		compatible = "spi-gpio";
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi_gpio_pins>;
+
+		gpio-sck = <&gpio1 12 0>;
+		gpio-miso = <&gpio1 18 0>;
+		gpio-mosi = <&gpio1 20 0>;
+		cs-gpios = <&gpio1 19 0>;
+		num-chipselects = <1>;
+
+		/* lcd panel */
+		lcd: td028ttec1@0 {
+			compatible = "toppoly,td028ttec1";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+
+			label = "lcd";
+			port {
+				lcd_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+		};
+	};
+
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	};
+
+	tv0: connector@1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&opa_out>;
+			};
+		};
+	};
+
+	tv_amp: opa362 {
+		compatible = "ti,opa362";
+		enable-gpios = <&gpio1 23 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				opa_in: endpoint@0 {
+					remote-endpoint = <&venc_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				opa_out: endpoint@0 {
+					remote-endpoint = <&tv_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+               pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+       };
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
+	spi_gpio_pins: spi_gpio_pinmux {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			ti,enable-vibra = <1>;
+			codec {
+				ti,ramp_delay_value = <3>;
+			};
+		};
+
+		twl_power: power {
+			compatible = "ti,twl4030-power";
+			ti,use_poweroff;
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	/* pressure sensor */
+	bmp085@77 {
+		compatible = "bosch,bmp085";
+		reg = <0x77>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
+	};
+
+	/* accelerometer */
+	bma180@41 {
+		compatible = "bosch,bma180";
+		reg = <0x41>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
+	};
+
+	/* gyroscope */
+	itg3200@68 {
+		compatible = "invensense,itg3200";
+		reg = <0x68>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <24 0>; /* GPIO_56 */
+	};
+
+	/* leds */
+	tca6507@45 {
+		compatible = "ti,tca6507";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x45>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gta04_led0: red_aux@0 {
+			label = "gta04:red:aux";
+			reg = <0x0>;
+		};
+
+		gta04_led1: green_aux@1 {
+			label = "gta04:green:aux";
+			reg = <0x1>;
+		};
+
+		gta04_led3: red_power@3 {
+			label = "gta04:red:power";
+			reg = <0x3>;
+			linux,default-trigger = "default-on";
+		};
+
+		gta04_led4: green_power@4 {
+			label = "gta04:green:power";
+			reg = <0x4>;
+		};
+
+		wifi_reset: wifi_reset@6 {
+			reg = <0x6>;
+			compatible = "gpio";
+		};
+	};
+
+	/* compass aka magnetometer */
+	hmc5843@1e {
+		compatible = "honeywell,hmc5883l";
+		reg = <0x1e>;
+	};
+
+	/* touchscreen */
+	tsc2007@48 {
+		compatible = "ti,tsc2007";
+		reg = <0x48>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
+		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+		ti,x-plate-ohms = <600>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc2 {
+	vmmc-supply = <&vaux4>;
+	bus-width = <4>;
+	ti,non-removable;
+	cap-power-off-card;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&twl_keypad {
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&charger {
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
+};
+
+/* spare */
+&vaux1 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+/* sensors */
+&vaux2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;
+};
+
+/* camera */
+&vaux3 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+};
+
+/* WLAN/BT */
+&vaux4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+/* GPS LNA */
+&vsim {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = < &dss_dpi_pins >;
+
+	status = "okay";
+	vdds_dsi-supply = <&vpll2>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&venc {
+	status = "okay";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&opa_in>;
+			ti,channels = <2>;
+			ti,invert-polarity;
+		};
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "U-Boot Env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x400000>;
+		};
+
+		filesystem@680000 {
+			label = "File System";
+			reg = <0x680000 0xf980000>;
+		};
+	};
+};
+
+&mcbsp2 {
+	status = "okay";
+};
diff --git a/src/arm/omap3-gta04a3.dts b/src/arm/omap3-gta04a3.dts
new file mode 100644
index 000000000000..3099a892cf50
--- /dev/null
+++ b/src/arm/omap3-gta04a3.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+	model = "Goldelico GTA04A3";
+};
+
+&i2c2 {
+
+	/* alternate accelerometer that might be installed on some GTA04A3 boards */
+	lis302@1d {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+		Vdd-supply = <&vaux2>;
+		Vdd_IO-supply = <&vaux2>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <8>;
+		st,click-thresh-y = <8>;
+		st,click-thresh-z = <10>;
+		st,click-click-time-limit = <9>;
+		st,click-latency = <50>;
+		st,irq1-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <32>;
+		st,min-limit-y = <3>;
+		st,min-limit-z = <3>;
+		st,max-limit-x = <3>;
+		st,max-limit-y = <32>;
+		st,max-limit-z = <32>;
+	};
+};
diff --git a/src/arm/omap3-gta04a4.dts b/src/arm/omap3-gta04a4.dts
new file mode 100644
index 000000000000..c918bb1f0529
--- /dev/null
+++ b/src/arm/omap3-gta04a4.dts
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2014 Marek Belisko <marek@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+	model = "Goldelico GTA04A4";
+};
diff --git a/src/arm/omap3-gta04a5.dts b/src/arm/omap3-gta04a5.dts
new file mode 100644
index 000000000000..52b386f6865b
--- /dev/null
+++ b/src/arm/omap3-gta04a5.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+	model = "Goldelico GTA04A5";
+
+	sound {
+		ti,jack-det-gpio = <&twl_gpio 2 0>;    /* GTA04A5 only */
+	};
+};
diff --git a/src/arm/omap3-ha-common.dtsi b/src/arm/omap3-ha-common.dtsi
new file mode 100644
index 000000000000..bd66545ef954
--- /dev/null
+++ b/src/arm/omap3-ha-common.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-tao3530.dtsi"
+
+/ {
+	gpio_poweroff {
+		pinctrl-names = "default";
+		pinctrl-0 = <&poweroff_pins>;
+
+		compatible = "gpio-poweroff";
+		gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;	/* GPIO 168 */
+	};
+};
+
+&omap3_pmx_core {
+	sound2_pins: pinmux_sound2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d8 gpio_44 */
+		>;
+	};
+
+	led_blue_pins: pinmux_led_blue_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4)	/* cam_xclka gpio_96, LED blue */
+		>;
+	};
+
+	led_green_pins: pinmux_led_green_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4)	/* cam_d8 gpio_107, LED green */
+		>;
+	};
+
+	led_red_pins: pinmux_led_red_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* cam_xclkb gpio_111, LED red */
+		>;
+	};
+
+	poweroff_pins: pinmux_poweroff_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* i2c2_scl gpio_168 */
+		>;
+	};
+
+	powerdown_input_pins: pinmux_powerdown_input_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4)	/* i2c2_sda gpio_183 */
+		>;
+	};
+
+	fpga_boot0_pins: fpga_boot0_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4)	/* cam_d2 gpio_101 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4)	/* cam_d3 gpio_102 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4)	/* cam_d4 gpio_103 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d5 gpio_104 */
+		>;
+	};
+
+	fpga_boot1_pins: fpga_boot1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4)	/* gpmc_d10 gpio_46 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d11 gpio_47 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4)	/* gpmc_d12 gpio_48 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_d13 gpio_49 */
+		>;
+	};
+};
+
+/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
diff --git a/src/arm/omap3-ha-lcd.dts b/src/arm/omap3-ha-lcd.dts
new file mode 100644
index 000000000000..11aa28d73f3a
--- /dev/null
+++ b/src/arm/omap3-ha-lcd.dts
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-ha-common.dtsi"
+
+/ {
+	model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM";
+	compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb2_pins
+		&powerdown_input_pins
+		&fpga_boot0_pins
+		&fpga_boot1_pins
+		&led_blue_pins
+		&led_green_pins
+		&led_red_pins
+		&touchscreen_wake_pins
+	>;
+
+	touchscreen_irq_pins: pinmux_touchscreen_irq_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpio_136, Touchscreen IRQ */
+		>;
+	};
+
+	touchscreen_wake_pins: pinmux_touchscreen_wake_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* gpio_110, Touchscreen Wake */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lte430_pins: pinmux_lte430_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
+		>;
+	};
+};
+
+/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	lcd0: display@0 {
+		compatible = "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lte430_pins>;
+		enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <31250000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <86>;
+			hsync-len = <1>;
+			vback-porch = <30>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 */
+
+		default-on;
+	};
+};
diff --git a/src/arm/omap3-ha.dts b/src/arm/omap3-ha.dts
new file mode 100644
index 000000000000..fde325688fb9
--- /dev/null
+++ b/src/arm/omap3-ha.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-ha-common.dtsi"
+
+/ {
+	model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM";
+	compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb2_pins
+		&powerdown_input_pins
+		&fpga_boot0_pins
+		&fpga_boot1_pins
+		&led_blue_pins
+		&led_green_pins
+		&led_red_pins
+	>;
+};
diff --git a/src/arm/omap3-igep.dtsi b/src/arm/omap3-igep.dtsi
new file mode 100644
index 000000000000..8a63ad2286aa
--- /dev/null
+++ b/src/arm/omap3-igep.dtsi
@@ -0,0 +1,217 @@
+/*
+ * Common device tree for IGEP boards based on AM/DM37x
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "igep2";
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	vdd33: regulator-vdd33 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33";
+		regulator-always-on;
+	};
+
+};
+
+&omap3_pmx_core {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
+			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
+			0x10e (PIN_INPUT | MUX_MODE0)		/* mcbsp2_clkx.mcbsp2_clkx */
+			0x110 (PIN_INPUT | MUX_MODE0)		/* mcbsp2_dr.mcbsp2.dr */
+			0x112 (PIN_OUTPUT | MUX_MODE0)		/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	smsc9221_pins: pinmux_smsc9221_pins {
+		pinctrl-single,pins = <
+			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x18a (PIN_INPUT | MUX_MODE0)   /* i2c1_scl.i2c1_scl */
+			0x18c (PIN_INPUT | MUX_MODE0)   /* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x192 (PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
+			0x194 (PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
+		>;
+	};
+};
+
+&gpmc {
+	nand@0,0 {
+		linux,mtd-name= "micron,mt29c4g96maz";
+		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0 0x100000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x100000 0x180000>;
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x280000 0x100000>;
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x380000 0x300000>;
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0x680000 0x1f980000>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			      };
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&mmc1 {
+      pinctrl-names = "default";
+      pinctrl-0 = <&mmc1_pins>;
+      vmmc-supply = <&vmmc1>;
+      vmmc_aux-supply = <&vsim>;
+      bus-width = <4>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pins>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/src/arm/omap3-igep0020-common.dtsi b/src/arm/omap3-igep0020-common.dtsi
new file mode 100644
index 000000000000..e458c2185e3c
--- /dev/null
+++ b/src/arm/omap3-igep0020-common.dtsi
@@ -0,0 +1,246 @@
+/*
+ * Common Device Tree Source for IGEPv2
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+		compatible = "gpio-leds";
+
+		boot {
+			 label = "omap3:green:boot";
+			 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			 default-state = "on";
+		};
+
+		user0 {
+			 label = "omap3:red:user0";
+			 gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+			 default-state = "off";
+		};
+
+		user1 {
+			 label = "omap3:red:user1";
+			 gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			 default-state = "off";
+		};
+
+		user2 {
+			label = "omap3:green:user1";
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* HS USB Port 1 Power */
+	hsusb1_power: hsusb1_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
+		vcc-supply = <&hsusb1_power>;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&tfp410_pins
+		&dss_dpi_pins
+	>;
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb1_pins
+	>;
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)		/* etk_ctl.hsusb1_clk */
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)		/* etk_clk.hsusb1_stp */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d8.hsusb1_dir */
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
+		>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in the EEPROM
+	 * as EDID data.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x20000000>,
+		 <5 0 0x2c000000 0x01000000>;
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc9221_pins>;
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
+&vpll2 {
+	/* Needed for DSS */
+	regulator-name = "vdds_dsi";
+};
+
+&dss {
+	status = "ok";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/src/arm/omap3-igep0020-rev-f.dts b/src/arm/omap3-igep0020-rev-f.dts
new file mode 100644
index 000000000000..cc8bd0cd8cf8
--- /dev/null
+++ b/src/arm/omap3-igep0020-rev-f.dts
@@ -0,0 +1,45 @@
+/*
+ * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep0020-common.dtsi"
+
+/ {
+	model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)";
+	compatible = "isee,omap3-igep0020-rev-f", "ti,omap36xx", "ti,omap3";
+
+	/* Regulator to trigger the WL_EN signal of the Wifi module */
+	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-lbep5clwmc-wlen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 - WL_EN */
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT | MUX_MODE4)	/* mcspi1_cs3.gpio_177 - W_IRQ */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - BT_EN */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - WL_EN */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
+	vmmc-supply = <&lbep5clwmc_wlen>;
+	bus-width = <4>;
+	non-removable;
+};
diff --git a/src/arm/omap3-igep0020.dts b/src/arm/omap3-igep0020.dts
new file mode 100644
index 000000000000..fea7f7edb45d
--- /dev/null
+++ b/src/arm/omap3-igep0020.dts
@@ -0,0 +1,67 @@
+/*
+ * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep0020-common.dtsi"
+
+/ {
+	model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
+	compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
+
+	/* Regulator to trigger the WIFI_PDN signal of the Wifi module */
+	lbee1usjyc_pdn: lbee1usjyc_pdn {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-lbee1usjyc-pdn";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 - WIFI_PDN */
+		startup-delay-us = <10000>;
+		enable-active-high;
+	};
+
+	/* Regulator to trigger the RESET_N_W signal of the Wifi module */
+	lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-lbee1usjyc-reset-n-w";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;	/* gpio_139 - RESET_N_W */
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - RESET_N_W */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 - WIFI_PDN */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - RST_N_B */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)	/* uart2_rts .uart2_rts*/
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)	/* uart2_tx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)	/* uart2_rx.uart2_rx */
+		>;
+	};
+};
+
+/* On board Wifi module */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
+	vmmc-supply = <&lbee1usjyc_pdn>;
+	vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+	bus-width = <4>;
+	non-removable;
+};
diff --git a/src/arm/omap3-igep0030-common.dtsi b/src/arm/omap3-igep0030-common.dtsi
new file mode 100644
index 000000000000..0cb1527c39d4
--- /dev/null
+++ b/src/arm/omap3-igep0030-common.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Common Device Tree Source for IGEP COM MODULE
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep.dtsi"
+
+/ {
+	leds: gpio_leds {
+		compatible = "gpio-leds";
+
+		user0 {
+			 label = "omap3:red:user0";
+			 gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
+			 default-state = "off";
+		};
+
+		user1 {
+			 label = "omap3:green:user1";
+			 gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;	/* LEDB */
+			 default-state = "off";
+		};
+
+		user2 {
+			 label = "omap3:red:user1";
+			 gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;		/* gpio_16 */
+			 default-state = "off";
+		};
+	};
+};
+
+&omap3_pmx_core {
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	leds_core2_pins: pinmux_leds_core2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)	/* etk_d2.gpio_16 */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
diff --git a/src/arm/omap3-igep0030-rev-g.dts b/src/arm/omap3-igep0030-rev-g.dts
new file mode 100644
index 000000000000..9326b282c94a
--- /dev/null
+++ b/src/arm/omap3-igep0030-rev-g.dts
@@ -0,0 +1,67 @@
+/*
+ * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep0030-common.dtsi"
+
+/ {
+	model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
+	compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3";
+
+	/* Regulator to trigger the WL_EN signal of the Wifi module */
+	lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-lbep5clwmc-wlen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 - WL_EN */
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 - W_IRQ */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - BT_EN */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - WL_EN */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)	/* i2c2_scl.gpio_168 */
+		>;
+	};
+
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&leds_pins &leds_core2_pins>;
+
+	boot {
+		label = "omap3:green:boot";
+		gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		default-state = "on";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
+	vmmc-supply = <&lbep5clwmc_wlen>;
+	bus-width = <4>;
+	non-removable;
+};
diff --git a/src/arm/omap3-igep0030.dts b/src/arm/omap3-igep0030.dts
new file mode 100644
index 000000000000..8150f47ccdf5
--- /dev/null
+++ b/src/arm/omap3-igep0030.dts
@@ -0,0 +1,70 @@
+/*
+ * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep0030-common.dtsi"
+
+/ {
+	model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
+	compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
+
+	/* Regulator to trigger the WIFI_PDN signal of the Wifi module */
+	lbee1usjyc_pdn: lbee1usjyc_pdn {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-lbee1usjyc-pdn";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 - WIFI_PDN */
+		startup-delay-us = <10000>;
+		enable-active-high;
+	};
+
+	/* Regulator to trigger the RESET_N_W signal of the Wifi module */
+	lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-lbee1usjyc-reset-n-w";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;	/* gpio_139 - RESET_N_W */
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 - RESET_N_W */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 - WIFI_PDN */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 - RST_N_B */
+		>;
+	};
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&leds_core2_pins>;
+
+	boot {
+		label = "omap3:green:boot";
+		gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;	/* LEDSYNC */
+		default-state = "on";
+	};
+};
+
+/* On board Wifi module */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
+	vmmc-supply = <&lbee1usjyc_pdn>;
+	vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+	bus-width = <4>;
+	non-removable;
+};
+
diff --git a/src/arm/omap3-ldp.dts b/src/arm/omap3-ldp.dts
new file mode 100644
index 000000000000..b699bc48f242
--- /dev/null
+++ b/src/arm/omap3-ldp.dts
@@ -0,0 +1,304 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "omap34xx.dtsi"
+#include "omap-gpmc-smsc911x.dtsi"
+
+/ {
+	model = "TI OMAP3430 LDP (Zoom1 Labrador)";
+	compatible = "ti,omap3-ldp", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>; /* 128 MB */
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+
+		key_enter {
+			label = "enter";
+			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
+			linux,code = <0x0107001c>; /* KEY_ENTER */
+			gpio-key,wakeup;
+		};
+
+		key_f1 {
+			label = "f1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
+			linux,code = <0x0303003b>; /* KEY_F1 */
+			gpio-key,wakeup;
+		};
+
+		key_f2 {
+			label = "f2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
+			linux,code = <0x0403003c>; /* KEY_F2 */
+			gpio-key,wakeup;
+		};
+
+		key_f3 {
+			label = "f3";
+			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
+			linux,code = <0x0503003d>; /* KEY_F3 */
+			gpio-key,wakeup;
+		};
+
+		key_f4 {
+			label = "f4";
+			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
+			linux,code = <0x0704003e>; /* KEY_F4 */
+			gpio-key,wakeup;
+		};
+
+		key_left {
+			label = "left";
+			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
+			linux,code = <0x04070069>; /* KEY_LEFT */
+			gpio-key,wakeup;
+		};
+
+		key_right {
+			label = "right";
+			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
+			linux,code = <0x0507006a>; /* KEY_RIGHT */
+			gpio-key,wakeup;
+		};
+
+		key_up {
+			label = "up";
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
+			linux,code = <0x06070067>; /* KEY_UP */
+			gpio-key,wakeup;
+		};
+
+		key_down {
+			label = "down";
+			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
+			linux,code = <0x0707006c>; /* KEY_DOWN */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x01000000>,
+		 <1 0 0x08000000 0x01000000>;
+
+	nand@0,0 {
+		linux,mtd-name= "micron,nand";
+		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x140000>;
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x1c0000 0x40000>;
+		};
+		partition@200000 {
+			label = "Kernel";
+			reg = <0x200000 0x1e00000>;
+		};
+		partition@2000000 {
+			label = "Filesystem";
+			reg = <0x2000000 0x6000000>;
+		};
+	};
+
+	ethernet@gpmc {
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		reg = <1 0 0xff>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_power: power {
+			compatible = "ti,twl4030-power-idle";
+			ti,use_poweroff;
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+#include "omap3-panel-sharp-ls037v7dw01.dtsi"
+
+&backlight0 {
+	gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+/* tps61130rsa enabled by twl4030 regen */
+&lcd_3v3 {
+	regulator-always-on;
+};
+
+&lcd0 {
+	enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>;	/* lcd INI */
+	reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;	/* gpio55, lcd RESB */
+	mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;	/* gpio56, lcd MO */
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		interrupt-parent = <&gpio2>;
+		interrupts = <22 0>;		/* gpio54 */
+		pendown-gpio = <&gpio2 22 0>;
+	};
+};
+
+&mmc1 {
+	/* See 35xx errata 2.1.1.128 in SPRZ278F */
+	compatible = "ti,omap3-pre-es3-hsmmc";
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	status="disabled";
+};
+
+&mmc3 {
+	status="disabled";
+};
+
+&omap3_pmx_core {
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			0xea (PIN_INPUT | MUX_MODE4)	/* cam_d2.gpio_101 */
+			0xec (PIN_INPUT | MUX_MODE4)	/* cam_d3.gpio_102 */
+			0xee (PIN_INPUT | MUX_MODE4)	/* cam_d4.gpio_103 */
+			0xf0 (PIN_INPUT | MUX_MODE4)	/* cam_d5.gpio_104 */
+			0xf2 (PIN_INPUT | MUX_MODE4)	/* cam_d6.gpio_105 */
+			0xf4 (PIN_INPUT | MUX_MODE4)	/* cam_d7.gpio_106 */
+			0xf6 (PIN_INPUT | MUX_MODE4)	/* cam_d8.gpio_107 */
+			0xf8 (PIN_INPUT | MUX_MODE4)	/* cam_d9.gpio_108 */
+			0xfa (PIN_INPUT | MUX_MODE4)	/* cam_d10.gpio_109 */
+		>;
+	};
+
+	musb_pins: pinmux_musb_pins {
+		pinctrl-single,pins = <
+			0x172 (PIN_INPUT | MUX_MODE0)	/* hsusb0_clk.hsusb0_clk */
+			0x17a (PIN_INPUT | MUX_MODE0)	/* hsusb0_data0.hsusb0_data0 */
+			0x17c (PIN_INPUT | MUX_MODE0)	/* hsusb0_data1.hsusb0_data1 */
+			0x17e (PIN_INPUT | MUX_MODE0)	/* hsusb0_data2.hsusb0_data2 */
+			0x180 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data3.hsusb0_data3 */
+			0x182 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data4.hsusb0_data4 */
+			0x184 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data5.hsusb0_data5 */
+			0x186 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
+			0x188 (PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
+			0x176 (PIN_INPUT | MUX_MODE0)	/* hsusb0_dir.hsusb0_dir */
+			0x178 (PIN_INPUT | MUX_MODE0)	/* hsusb0_nxt.hsusb0_nxt */
+			0x174 (PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+		>;
+	};
+};
+
+&twl_keypad {
+	linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
+			MATRIX_KEY(0, 1, KEY_2)
+			MATRIX_KEY(0, 2, KEY_3)
+			MATRIX_KEY(1, 0, KEY_4)
+			MATRIX_KEY(1, 1, KEY_5)
+			MATRIX_KEY(1, 2, KEY_6)
+			MATRIX_KEY(1, 3, KEY_F5)
+			MATRIX_KEY(2, 0, KEY_7)
+			MATRIX_KEY(2, 1, KEY_8)
+			MATRIX_KEY(2, 2, KEY_9)
+			MATRIX_KEY(2, 3, KEY_F6)
+			MATRIX_KEY(3, 0, KEY_F7)
+			MATRIX_KEY(3, 1, KEY_0)
+			MATRIX_KEY(3, 2, KEY_F8)
+			MATRIX_KEY(5, 4, KEY_RESERVED)
+			MATRIX_KEY(4, 4, KEY_VOLUMEUP)
+			MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)>;
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&musb_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	mode = <3>;
+	power = <50>;
+};
+
+&vaux1 {
+	/* Needed for ads7846 */
+        regulator-name = "vcc";
+};
diff --git a/src/arm/omap3-lilly-a83x.dtsi b/src/arm/omap3-lilly-a83x.dtsi
new file mode 100644
index 000000000000..e81fb651d5d0
--- /dev/null
+++ b/src/arm/omap3-lilly-a83x.dtsi
@@ -0,0 +1,459 @@
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "omap36xx.dtsi"
+
+/ {
+	model = "INCOstartec LILLY-A83X module (DM3730)";
+	compatible = "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
+
+	chosen {
+			bootargs = "console=ttyO0,115200n8 vt.global_cursor_default=0 consoleblank=0";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;   /* 128 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "lilly-a83x::led1";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "lilly-a83x";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	reg_vcc3: vcc3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_vcc3>;
+	};
+};
+
+&omap3_pmx_wkup {
+	pinctrl-names = "default";
+
+	lan9221_pins: pinmux_lan9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_129 */
+		>;
+	};
+
+	tsc2048_pins: pinmux_tsc2048_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a16, PIN_INPUT_PULLUP | MUX_MODE4)   /* sys_boot6.gpio_8 */
+		>;
+	};
+
+	mmc1cd_pins: pinmux_mmc1cd_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a56, PIN_INPUT | MUX_MODE4)   /* reserved.gpio_126 */
+		>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0)   /* uart1_tx.uart1_tx */
+			OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE0)   /* uart1_rts.uart1_rts */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT | MUX_MODE0)    /* uart1_cts.uart1_cts */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0)    /* uart1_rx.uart1_rx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)   /* mcbsp3_clkx.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)    /* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)    /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)   /* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc ,PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
+		>;
+	};
+
+	hsusb1_pins: pinmux_hsusb1_pins {
+		pinctrl-single,pins = <
+
+			/* GPIO 182 controls USB-Hub reset. But USB-Phy its
+			 * reset can't be controlled. So we clamp this GPIO to
+			 * high (PIN_OFF_OUTPUT_HIGH) to always enable USB-Hub.
+			 */
+
+			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT_PULLUP | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcspi2_cs1.gpio_182 */
+		>;
+	};
+
+	hsusb_otg_pins: pinmux_hsusb_otg_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0)   /* hsusb0_clk.hsusb0_clk */
+			OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0)  /* hsusb0_stp.hsusb0_stp */
+			OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0)   /* hsusb0_dir.hsusb0_dir */
+			OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0)   /* hsusb0_nxt.hsusb0_nxt */
+			OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0)   /* hsusb0_data0.hsusb0_data0 */
+			OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0)   /* hsusb0_data1.hsusb0_data1 */
+			OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0)   /* hsusb0_data2.hsusb0_data2 */
+			OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0)   /* hsusb0_data3.hsusb0_data3 */
+			OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0)   /* hsusb0_data4.hsusb0_data4 */
+			OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0)   /* hsusb0_data5.hsusb0_data5 */
+			OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)   /* hsusb0_data6.hsusb0_data6 */
+			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)   /* hsusb0_data7.hsusb0_data7 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	spi2_pins: pinmux_spi2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_clk.mcspi2_clk */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_simo.mcspi2_simo */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi2_somi.mcspi2_somi */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE0)   /* mcspi2_cs0.mcspi2_cs0 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+
+	hsusb1_2_pins: pinmux_hsusb1_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)  /* etk_clk.hsusb1_stp */
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT | MUX_MODE3)   /* etk_ctl.hsusb1_clk */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)   /* etk_d0.hsusb1_data0 */
+			OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)   /* etk_d1.hsusb1_data1 */
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)   /* etk_d2.hsusb1_data2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)   /* etk_d3.hsusb1_data7 */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)   /* etk_d4.hsusb1_data4 */
+			OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)   /* etk_d5.hsusb1_data5 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)   /* etk_d6.hsusb1_data6 */
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)   /* etk_d7.hsusb1_data3 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)   /* etk_d8.hsusb1_dir */
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)   /* etk_d9.hsusb1_nxt */
+		>;
+	};
+
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_OUTPUT_PULLDOWN | MUX_MODE4)   /* etk_d15.gpio_29 */
+		>;
+	};
+
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};
+
+&gpio6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>;   /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+	vmmc1: regulator-vmmc1 {
+		regulator-always-on;
+	};
+
+	vdd1: regulator-vdd1 {
+		regulator-always-on;
+	};
+
+	vdd2: regulator-vdd2 {
+		regulator-always-on;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+	clock-frequency = <2600000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+		gpiom1: gpio@20 {
+			compatible = "mcp,mcp23017";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x20>;
+		};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&mmc1 {
+	cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+	cd-inverted;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1cd_pins>;
+	cap-sdio-irq;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+
+	tsc2046@0 {
+		reg = <0>;   /* CS0 */
+		compatible = "ti,tsc2046";
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 0>;   /* boot6 / gpio_8 */
+		spi-max-frequency = <1000000>;
+		pendown-gpio = <&gpio1 8 0>;
+		vcc-supply = <&reg_vcc3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2048_pins>;
+
+		ti,x-min = <300>;
+		ti,x-max = <3000>;
+		ti,y-min = <600>;
+		ti,y-max = <3600>;
+		ti,x-plate-ohms = <80>;
+		ti,pressure-max = <255>;
+		ti,swap-xy;
+
+		linux,wakeup;
+	};
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
+&usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_2_pins>;
+	num-ports = <2>;
+	port1-mode = "ehci-phy";
+};
+
+&usb_otg_hs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb_otg_pins>;
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,
+		<7 0 0x15000000 0x01000000>;
+
+	nand@0,0 {
+		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		/* no elm on omap3 */
+
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <2>;
+		gpmc,wait-pin = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,burst-length= <4>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <100>;
+		gpmc,cs-wr-off-ns = <100>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <100>;
+		gpmc,adv-wr-off-ns = <100>;
+		gpmc,oe-on-ns = <5>;
+		gpmc,oe-off-ns = <75>;
+		gpmc,we-on-ns = <5>;
+		gpmc,we-off-ns = <75>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <60>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-delay-ns = <50>;
+		gpmc,wr-data-mux-bus-ns = <75>;
+		gpmc,wr-access-ns = <155>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "MLO";
+			reg = <0 0x80000>;
+		};
+
+		partition@0x80000 {
+			label = "u-boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		partition@0x260000 {
+			label = "u-boot-environment";
+			reg = <0x260000 0x20000>;
+		};
+
+		partition@0x280000 {
+			label = "kernel";
+			reg = <0x280000 0x500000>;
+		};
+
+		partition@0x780000 {
+			label = "filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+
+	ethernet@7,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <60>;
+		gpmc,cs-wr-off-ns = <60>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <60>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <50>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wr-data-mux-bus-ns = <15>;
+		gpmc,wr-access-ns = <75>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&reg_vcc3>;
+		vdd33a-supply = <&reg_vcc3>;
+		reg-io-width = <4>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 0x2>;
+		reg = <7 0 0xff>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9221_pins>;
+		phy-mode = "mii";
+	};
+};
diff --git a/src/arm/omap3-lilly-dbb056.dts b/src/arm/omap3-lilly-dbb056.dts
new file mode 100644
index 000000000000..834f7c65f62d
--- /dev/null
+++ b/src/arm/omap3-lilly-dbb056.dts
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2014 Christoph Fritz <chf.fritzc@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+/dts-v1/;
+
+#include "omap3-lilly-a83x.dtsi"
+
+/ {
+	model = "INCOstartec LILLY-DBB056 (DM3730)";
+	compatible = "incostartec,omap3-lilly-dbb056", "incostartec,omap3-lilly-a83x", "ti,omap36xx", "ti,omap3";
+};
+
+&twl {
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl4030-vaux2";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	lan9117_pins: pinmux_lan9117_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4)   /* cam_fld.gpio_98 */
+		>;
+	};
+
+	gpio4_pins: pinmux_gpio4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4)   /* cam_xclkb.gpio_111 -> sja1000 IRQ */
+		>;
+	};
+
+	gpio5_pins: pinmux_gpio5_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_OUTPUT | PIN_OFF_OUTPUT_HIGH | MUX_MODE4)   /* mcbsp1_clk.gpio_156 -> enable DSS */
+		>;
+	};
+
+	lcd_pins: pinmux_lcd_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)   /* sdmmc2_dat3.sdmmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat4.sdmmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat5.sdmmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1)   /* sdmmc2_dat6.sdmmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1)    /* sdmmc2_dat7.sdmmc2_clkin */
+			OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_cts_rctx.gpio_163 -> wp */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_INPUT_PULLUP | MUX_MODE4)   /* uart3_rts_sd.gpio_164 -> cd */
+		>;
+	};
+
+	spi1_pins: pinmux_spi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)   /* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)   /* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)   /* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0)   /* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio4_pins>;
+};
+
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio5_pins>;
+};
+
+&mmc2 {
+	status = "okay";
+	bus-width = <4>;
+	vmmc-supply = <&vmmc1>;
+	cd-gpios = <&gpio6 4 0>;   /* gpio_164 */
+	wp-gpios = <&gpio6 3 0>;   /* gpio_163 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	ti,dual-volt;
+};
+
+&mcspi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>,   /* nand assigned by COM a83x */
+		<4 0 0x20000000 0x01000000>,
+		<7 0 0x15000000 0x01000000>;   /* eth assigend by COM a83x */
+
+	ethernet@4,0 {
+		compatible = "smsc,lan9117", "smsc,lan9115";
+		bank-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <65>;
+		gpmc,cs-wr-off-ns = <65>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <65>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <65>;
+		gpmc,rd-cycle-ns = <100>;
+		gpmc,wr-cycle-ns = <100>;
+		gpmc,access-ns = <60>;
+		gpmc,page-burst-access-ns = <5>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wr-data-mux-bus-ns = <15>;
+		gpmc,wr-access-ns = <75>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		vddvario-supply = <&reg_vcc3>;
+		vdd33a-supply = <&reg_vcc3>;
+		reg-io-width = <4>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <2 0x2>;
+		reg = <4 0 0xff>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9117_pins>;
+		phy-mode = "mii";
+		smsc,force-internal-phy;
+	};
+};
diff --git a/src/arm/omap3-n9.dts b/src/arm/omap3-n9.dts
new file mode 100644
index 000000000000..9938b5dc1909
--- /dev/null
+++ b/src/arm/omap3-n9.dts
@@ -0,0 +1,18 @@
+/*
+ * omap3-n9.dts - Device Tree file for Nokia N9
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+
+/ {
+	model = "Nokia N9";
+	compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
+};
diff --git a/src/arm/omap3-n900.dts b/src/arm/omap3-n900.dts
new file mode 100644
index 000000000000..60403273f83e
--- /dev/null
+++ b/src/arm/omap3-n900.dts
@@ -0,0 +1,913 @@
+/*
+ * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
+ * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 (or later) as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap34xx-hs.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Nokia N900";
+	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "debug::sleep";
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;  /* gpio162 */
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&debug_leds>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		camera_lens_cover {
+			label = "Camera Lens Cover";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x09>; /* SW_CAMERA_LENS_COVER */
+			gpio-key,wakeup;
+		};
+
+		camera_focus {
+			label = "Camera Focus";
+			gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
+			linux,code = <0x210>; /* KEY_CAMERA_FOCUS */
+			gpio-key,wakeup;
+		};
+
+		camera_capture {
+			label = "Camera Capture";
+			gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
+			linux,code = <0xd4>; /* KEY_CAMERA */
+			gpio-key,wakeup;
+		};
+
+		lock_button {
+			label = "Lock Button";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
+			linux,code = <0x98>; /* KEY_SCREENLOCK */
+			gpio-key,wakeup;
+		};
+
+		keypad_slide {
+			label = "Keypad Slide";
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x0a>; /* SW_KEYPAD_SLIDE */
+			gpio-key,wakeup;
+		};
+
+		proximity_sensor {
+			label = "Proximity Sensor";
+			gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0x0b>; /* SW_FRONT_PROXIMITY */
+		};
+	};
+
+	isp1704: isp1704 {
+		compatible = "nxp,isp1704";
+		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		usb-phy = <&usb2_phy>;
+	};
+
+	tv: connector {
+		compatible = "composite-video-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+	};
+
+	sound: n900-audio {
+		compatible = "nokia,n900-audio";
+
+		nokia,cpu-dai = <&mcbsp2>;
+		nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
+		nokia,headphone-amplifier = <&tpa6130a2>;
+
+		tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
+		jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
+		eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
+		speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	battery: n900-battery {
+		compatible = "nokia,n900-battery";
+		io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
+		io-channel-names = "temp", "bsi", "vbat";
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx */
+		>;
+	};
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* gpmc_ncs3.gpio_54 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4)		/* dss_data16.gpio_86 */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
+		>;
+	};
+
+	gpmc_pins: pinmux_gpmc_pins {
+		pinctrl-single,pins = <
+
+			/* address lines */
+                        OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
+                        OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
+                        OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
+
+			/* data lines, gpmc_d0..d7 not muxable according to TRM */
+                        OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
+                        OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
+                        OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
+                        OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
+                        OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
+                        OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
+                        OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
+                        OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
+
+			/*
+			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+			 */
+                        OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
+                        OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x18a (PIN_INPUT | MUX_MODE0)		/* i2c1_scl */
+			0x18c (PIN_INPUT | MUX_MODE0)		/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x18e (PIN_INPUT | MUX_MODE0)		/* i2c2_scl */
+			0x190 (PIN_INPUT | MUX_MODE0)		/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x192 (PIN_INPUT | MUX_MODE0)		/* i2c3_scl */
+			0x194 (PIN_INPUT | MUX_MODE0)		/* i2c3_sda */
+		>;
+	};
+
+	debug_leds: pinmux_debug_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 */
+		>;
+	};
+
+	mcspi4_pins: pinmux_mcspi4_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
+			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
+			0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
+			0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
+			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
+			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
+			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
+			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
+		>;
+	};
+
+	acx565akm_pins: pinmux_acx565akm_pins {
+		pinctrl-single,pins = <
+			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
+		>;
+	};
+
+	dss_sdi_pins: pinmux_dss_sdi_pins {
+		pinctrl-single,pins = <
+			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
+			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
+			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
+			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
+
+			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
+			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
+		>;
+	};
+
+	wl1251_pins: pinmux_wl1251 {
+		pinctrl-single,pins = <
+			0x0ce (PIN_OUTPUT | MUX_MODE4)		/* gpio 87 => wl1251 enable */
+			0x05a (PIN_INPUT | MUX_MODE4)		/* gpio 42 => wl1251 irq */
+		>;
+	};
+
+	ssi_pins: pinmux_ssi {
+		pinctrl-single,pins = <
+			0x150 (PIN_INPUT_PULLUP | MUX_MODE1)	/* ssi1_rdy_tx */
+			0x14e (PIN_OUTPUT | MUX_MODE1)		/* ssi1_flag_tx */
+			0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+			0x14c (PIN_OUTPUT | MUX_MODE1)		/* ssi1_dat_tx */
+			0x154 (PIN_INPUT | MUX_MODE1)		/* ssi1_dat_rx */
+			0x156 (PIN_INPUT | MUX_MODE1)		/* ssi1_flag_rx */
+			0x158 (PIN_OUTPUT | MUX_MODE1)		/* ssi1_rdy_rx */
+			0x15a (PIN_OUTPUT | MUX_MODE1)		/* ssi1_wake */
+		>;
+	};
+
+	modem_pins: pinmux_modem {
+		pinctrl-single,pins = <
+			0x0ac (PIN_OUTPUT | MUX_MODE4)		/* gpio 70 => cmt_apeslpx */
+			0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
+			0x0b2 (PIN_OUTPUT | MUX_MODE4)		/* gpio 73 => cmt_rst_rq */
+			0x0b4 (PIN_OUTPUT | MUX_MODE4)		/* gpio 74 => cmt_en */
+			0x0b6 (PIN_OUTPUT | MUX_MODE4)		/* gpio 75 => cmt_rst */
+			0x15e (PIN_OUTPUT | MUX_MODE4)		/* gpio 157 => cmt_bsi */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <2200000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&vaux1 {
+	regulator-name = "V28";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on; /* due to battery cover sensor */
+};
+
+&vaux2 {
+	regulator-name = "VCSI";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vaux3 {
+	regulator-name = "VMMC2_30";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+	regulator-name = "VCAM_ANA_28";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&vmmc1 {
+	regulator-name = "VMMC1";
+	regulator-min-microvolt = <1850000>;
+	regulator-max-microvolt = <3150000>;
+};
+
+&vmmc2 {
+	regulator-name = "V28_A";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on; /* due VIO leak to AIC34 VDDs */
+};
+
+&vpll1 {
+	regulator-name = "VPLL";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&vpll2 {
+	regulator-name = "VSDI_CSI";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&vsim {
+	regulator-name = "VMMC2_IO_18";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vio {
+	regulator-name = "VIO";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&vintana1 {
+	regulator-name = "VINTANA1";
+	/* fixed to 1500000 */
+	regulator-always-on;
+};
+
+&vintana2 {
+	regulator-name = "VINTANA2";
+	regulator-min-microvolt = <2750000>;
+	regulator-max-microvolt = <2750000>;
+	regulator-always-on;
+};
+
+&vintdig {
+	regulator-name = "VINTDIG";
+	/* fixed to 1500000 */
+	regulator-always-on;
+};
+
+&twl {
+	twl_audio: audio {
+		compatible = "ti,twl4030-audio";
+		ti,enable-vibra = <1>;
+	};
+
+	twl_power: power {
+		compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
+		ti,use_poweroff;
+	};
+};
+
+&twl_keypad {
+	linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
+			 MATRIX_KEY(0x00, 0x01, KEY_O)
+			 MATRIX_KEY(0x00, 0x02, KEY_P)
+			 MATRIX_KEY(0x00, 0x03, KEY_COMMA)
+			 MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
+			 MATRIX_KEY(0x00, 0x06, KEY_A)
+			 MATRIX_KEY(0x00, 0x07, KEY_S)
+
+			 MATRIX_KEY(0x01, 0x00, KEY_W)
+			 MATRIX_KEY(0x01, 0x01, KEY_D)
+			 MATRIX_KEY(0x01, 0x02, KEY_F)
+			 MATRIX_KEY(0x01, 0x03, KEY_G)
+			 MATRIX_KEY(0x01, 0x04, KEY_H)
+			 MATRIX_KEY(0x01, 0x05, KEY_J)
+			 MATRIX_KEY(0x01, 0x06, KEY_K)
+			 MATRIX_KEY(0x01, 0x07, KEY_L)
+
+			 MATRIX_KEY(0x02, 0x00, KEY_E)
+			 MATRIX_KEY(0x02, 0x01, KEY_DOT)
+			 MATRIX_KEY(0x02, 0x02, KEY_UP)
+			 MATRIX_KEY(0x02, 0x03, KEY_ENTER)
+			 MATRIX_KEY(0x02, 0x05, KEY_Z)
+			 MATRIX_KEY(0x02, 0x06, KEY_X)
+			 MATRIX_KEY(0x02, 0x07, KEY_C)
+			 MATRIX_KEY(0x02, 0x08, KEY_F9)
+
+			 MATRIX_KEY(0x03, 0x00, KEY_R)
+			 MATRIX_KEY(0x03, 0x01, KEY_V)
+			 MATRIX_KEY(0x03, 0x02, KEY_B)
+			 MATRIX_KEY(0x03, 0x03, KEY_N)
+			 MATRIX_KEY(0x03, 0x04, KEY_M)
+			 MATRIX_KEY(0x03, 0x05, KEY_SPACE)
+			 MATRIX_KEY(0x03, 0x06, KEY_SPACE)
+			 MATRIX_KEY(0x03, 0x07, KEY_LEFT)
+
+			 MATRIX_KEY(0x04, 0x00, KEY_T)
+			 MATRIX_KEY(0x04, 0x01, KEY_DOWN)
+			 MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
+			 MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
+			 MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
+			 MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
+			 MATRIX_KEY(0x04, 0x08, KEY_F10)
+
+			 MATRIX_KEY(0x05, 0x00, KEY_Y)
+			 MATRIX_KEY(0x05, 0x08, KEY_F11)
+
+			 MATRIX_KEY(0x06, 0x00, KEY_U)
+
+			 MATRIX_KEY(0x07, 0x00, KEY_I)
+			 MATRIX_KEY(0x07, 0x01, KEY_F7)
+			 MATRIX_KEY(0x07, 0x02, KEY_F8)
+			 >;
+};
+
+&twl_gpio {
+	ti,pullups	= <0x0>;
+	ti,pulldowns	= <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <100000>;
+
+	tlv320aic3x: tlv320aic3x@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+		ai3x-gpio-func = <
+			0 /* AIC3X_GPIO1_FUNC_DISABLED */
+			5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
+		>;
+
+		AVDD-supply = <&vmmc2>;
+		DRVDD-supply = <&vmmc2>;
+		IOVDD-supply = <&vio>;
+		DVDD-supply = <&vio>;
+	};
+
+	tlv320aic3x_aux: tlv320aic3x@19 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x19>;
+		gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
+
+		AVDD-supply = <&vmmc2>;
+		DRVDD-supply = <&vmmc2>;
+		IOVDD-supply = <&vio>;
+		DVDD-supply = <&vio>;
+	};
+
+	tsl2563: tsl2563@29 {
+		compatible = "amstaos,tsl2563";
+		reg = <0x29>;
+
+		amstaos,cover-comp-gain = <16>;
+	};
+
+	lp5523: lp5523@32 {
+		compatible = "national,lp5523";
+		reg = <0x32>;
+		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
+		enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
+
+		chan0 {
+			chan-name = "lp5523:kb1";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan1 {
+			chan-name = "lp5523:kb2";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan2 {
+			chan-name = "lp5523:kb3";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan3 {
+			chan-name = "lp5523:kb4";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan4 {
+			chan-name = "lp5523:b";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan5 {
+			chan-name = "lp5523:g";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan6 {
+			chan-name = "lp5523:r";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan7 {
+			chan-name = "lp5523:kb5";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+
+		chan8 {
+			chan-name = "lp5523:kb6";
+			led-cur = /bits/ 8 <50>;
+			max-cur = /bits/ 8 <100>;
+		};
+	};
+
+	bq27200: bq27200@55 {
+		compatible = "ti,bq27200";
+		reg = <0x55>;
+	};
+
+	tpa6130a2: tpa6130a2@60 {
+		compatible = "ti,tpa6130a2";
+		reg = <0x60>;
+
+		Vdd-supply = <&vmmc2>;
+
+		power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
+	};
+
+	si4713: si4713@63 {
+		compatible = "silabs,si4713";
+                reg = <0x63>;
+
+                interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+                reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+                vio-supply = <&vio>;
+                vdd-supply = <&vaux1>;
+	};
+
+	bq24150a: bq24150a@6b {
+		compatible = "ti,bq24150a";
+		reg = <0x6b>;
+
+		ti,current-limit = <100>;
+		ti,weak-battery-voltage = <3400>;
+		ti,battery-regulation-voltage = <4200>;
+		ti,charge-current = <650>;
+		ti,termination-current = <100>;
+		ti,resistor-sense = <68>;
+
+		ti,usb-charger-detection = <&isp1704>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
+};
+
+/* most boards use vaux3, only some old versions use vmmc2 instead */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vaux3>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+	non-removable;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&gpmc {
+	ranges = <0 0 0x01000000 0x01000000>,	/* 16 MB for OneNAND */
+		 <1 0 0x02000000 0x01000000>;	/* 16 MB for smc91c96 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	/* sys_ndmareq1 could be used by the driver, not as gpio65 though */
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
+		gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		/*
+		 * MTD partition table corresponding to Nokia's
+		 * Maemo 5 (Fremantle) release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00020000>;
+			read-only;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00020000 0x00060000>;
+		};
+		partition@2 {
+			label = "log";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "kernel";
+			reg = <0x000c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "initfs";
+			reg = <0x002c0000 0x00200000>;
+		};
+		partition@5 {
+			label = "rootfs";
+			reg = <0x004c0000 0x0fb40000>;
+		};
+	};
+
+	/* Ethernet is on some early development boards and qemu */
+	ethernet@gpmc {
+		compatible = "smsc,lan91c94";
+		interrupt-parent = <&gpio2>;
+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;	/* gpio54 */
+		reg = <1 0x300 0xf>;		/* 16 byte IO range at offset 0x300 */
+		bank-width = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ethernet_pins>;
+		power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;	/* gpio86 */
+		reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* gpio164 */
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <48>;
+		gpmc,cs-wr-off-ns = <24>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <0>;
+		gpmc,adv-wr-off-ns = <0>;
+		gpmc,we-on-ns = <12>;
+		gpmc,we-off-ns = <18>;
+		gpmc,oe-on-ns = <12>;
+		gpmc,oe-off-ns = <48>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,access-ns = <42>;
+		gpmc,rd-cycle-ns = <180>;
+		gpmc,wr-cycle-ns = <180>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <12>;
+	};
+};
+
+&mcspi1 {
+	/*
+	 * For some reason, touchscreen is necessary for screen to work at
+	 * all on real hw. It works well without it on emulator.
+	 *
+	 * Also... order in the device tree actually matters here.
+	 */
+	tsc2005@0 {
+		compatible = "ti,tsc2005";
+		spi-max-frequency = <6000000>;
+		reg = <0>;
+
+		vio-supply = <&vio>;
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-max-x = <4096>;
+		touchscreen-max-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+
+	acx565akm@2 {
+		compatible = "sony,acx565akm";
+		spi-max-frequency = <6000000>;
+		reg = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&acx565akm_pins>;
+
+		label = "lcd";
+		reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&sdi_out>;
+			};
+		};
+	};
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi4_pins>;
+
+	wl1251@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl1251_pins>;
+
+		vio-supply = <&vio>;
+
+		compatible = "ti,wl1251";
+		reg = <0>;
+		spi-max-frequency = <48000000>;
+
+		spi-cpol;
+		spi-cpha;
+
+		ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
+	};
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <2>;
+	power = <50>;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_sdi_pins>;
+
+	vdds_sdi-supply = <&vaux1>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			sdi_out: endpoint {
+				remote-endpoint = <&lcd_in>;
+				datapairs = <2>;
+			};
+		};
+	};
+};
+
+&venc {
+	status = "ok";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&tv_connector_in>;
+			ti,channels = <1>;
+		};
+	};
+};
+
+&mcbsp2 {
+	status = "ok";
+};
+
+&ssi_port1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssi_pins>;
+
+	ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+
+	modem: hsi-client {
+		compatible = "nokia,n900-modem";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&modem_pins>;
+
+		hsi-channel-ids = <0>, <1>, <2>, <3>;
+		hsi-channel-names = "mcsaab-control",
+				    "speech-control",
+				    "speech-data",
+				    "mcsaab-data";
+		hsi-speed-kbps = <55000>;
+		hsi-mode = "frame";
+		hsi-flow = "synchronized";
+		hsi-arb-mode = "round-robin";
+
+		interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
+
+		gpios = <&gpio3  6 GPIO_ACTIVE_HIGH>, /* 70 */
+			<&gpio3  9 GPIO_ACTIVE_HIGH>, /* 73 */
+			<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
+			<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
+			<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
+		gpio-names = "cmt_apeslpx",
+			     "cmt_rst_rq",
+			     "cmt_en",
+			     "cmt_rst",
+			     "cmt_bsi";
+	};
+};
+
+&ssi_port2 {
+	status = "disabled";
+};
diff --git a/src/arm/omap3-n950-n9.dtsi b/src/arm/omap3-n950-n9.dtsi
new file mode 100644
index 000000000000..c41db94ee9c2
--- /dev/null
+++ b/src/arm/omap3-n950-n9.dtsi
@@ -0,0 +1,193 @@
+/*
+ * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap36xx-hs.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	vemmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VEMMC";
+		regulator-min-microvolt = <2900000>;
+		regulator-max-microvolt = <2900000>;
+		gpio = <&gpio5 29 0>; /* gpio line 157 */
+		startup-delay-us = <150>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2900000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&twl {
+	compatible = "ti,twl5031";
+
+	twl_power: power {
+		compatible = "ti,twl4030-power";
+		ti,use_poweroff;
+	};
+};
+
+&twl_gpio {
+	ti,pullups	= <0x000001>; /* BIT(0) */
+	ti,pulldowns	= <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
+};
+
+/* CSI-2 receiver */
+&vaux2 {
+	regulator-name = "vaux2";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+/* Cameras */
+&vaux3 {
+	regulator-name = "vaux3";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vemmc>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
+
+	onenand@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		/*
+		 * MTD partition table corresponding to Nokia's MeeGo 1.2
+		 * Harmattan release.
+		 */
+		partition@0 {
+			label = "bootloader";
+			reg = <0x00000000 0x00100000>;
+		};
+		partition@1 {
+			label = "config";
+			reg = <0x00100000 0x002c0000>;
+		};
+		partition@2 {
+			label = "kernel";
+			reg = <0x003c0000 0x01000000>;
+		};
+		partition@3 {
+			label = "log";
+			reg = <0x013c0000 0x00200000>;
+		};
+		partition@4 {
+			label = "var";
+			reg = <0x015c0000 0x1ca40000>;
+		};
+		partition@5 {
+			label = "moslo";
+			reg = <0x1e000000 0x02000000>;
+		};
+		partition@6 {
+			label = "omap2-onenand";
+			reg = <0x00000000 0x20000000>;
+		};
+	};
+};
diff --git a/src/arm/omap3-n950.dts b/src/arm/omap3-n950.dts
new file mode 100644
index 000000000000..261c5589bfa3
--- /dev/null
+++ b/src/arm/omap3-n950.dts
@@ -0,0 +1,18 @@
+/*
+ * omap3-n950.dts - Device Tree file for Nokia N950
+ *
+ * Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap3-n950-n9.dtsi"
+
+/ {
+	model = "Nokia N950";
+	compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
+};
diff --git a/src/arm/omap3-overo-alto35-common.dtsi b/src/arm/omap3-overo-alto35-common.dtsi
new file mode 100644
index 000000000000..7aae8fb82c1f
--- /dev/null
+++ b/src/arm/omap3-overo-alto35-common.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd35.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		gpio148 {
+			label = "overo:red:gpio148";
+			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;		/* gpio 148 */
+		};
+		gpio150 {
+			label = "overo:yellow:gpio150";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;		/* gpio 150 */
+		};
+		gpio151 {
+			label = "overo:blue:gpio151";
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;		/* gpio 151 */
+		};
+		gpio170 {
+			label = "overo:green:gpio170";
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;		/* gpio 170 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		button0@10 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;		/* gpio_10 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&omap3_pmx_core {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE4)	/* uart1_tx.gpio_148 */
+			OMAP3_CORE1_IOPAD(0x2180, PIN_OUTPUT | MUX_MODE4)	/* uart1_cts.gpio_150 */
+			OMAP3_CORE1_IOPAD(0x2182, PIN_OUTPUT | MUX_MODE4)	/* uart1_rx.gpio_151 */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a18, PIN_INPUT | MUX_MODE4)		/* sys_clkout1.gpio_10 */
+		>;
+	};
+};
+
+&usbhshost {
+	status = "disabled";
+};
+
diff --git a/src/arm/omap3-overo-alto35.dts b/src/arm/omap3-overo-alto35.dts
new file mode 100644
index 000000000000..a3249eb7501d
--- /dev/null
+++ b/src/arm/omap3-overo-alto35.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Alto35";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/src/arm/omap3-overo-base.dtsi b/src/arm/omap3-overo-base.dtsi
new file mode 100644
index 000000000000..d36bf0250a05
--- /dev/null
+++ b/src/arm/omap3-overo-base.dtsi
@@ -0,0 +1,221 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The Gumstix Overo must be combined with an expansion board.
+ */
+
+/ {
+	pwmleds {
+		compatible = "pwm-leds";
+
+		overo {
+			label = "overo:blue:COM";
+			pwms = <&twl_pwmled 1 7812500>;
+			max-brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "overo";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio6 8 0>;				/* gpio_168: vbus enable */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;	/* gpio_183 */
+		vcc-supply = <&hsusb2_power>;
+	};
+
+	/* Regulator to trigger the nPoweron signal of the Wifi module */
+	w3cbw003c_npoweron: regulator-w3cbw003c-npoweron {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-w3cbw003c-npoweron";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;		/* gpio_54: nPoweron */
+		enable-active-high;
+	};
+
+	/* Regulator to trigger the nReset signal of the Wifi module */
+	w3cbw003c_wifi_nreset: regulator-w3cbw003c-wifi-nreset {
+		pinctrl-names = "default";
+		pinctrl-0 = <&w3cbw003c_pins &w3cbw003c_2_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-w3cbw003c-wifi-nreset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;		/* gpio_16: WiFi nReset */
+		startup-delay-us = <10000>;
+	};
+
+	/* Regulator to trigger the nReset signal of the Bluetooth module */
+	w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-w3cbw003c-bt-nreset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;		/* gpio_164: BT nReset */
+		startup-delay-us = <10000>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_pins
+	>;
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	/* WiFi/BT combo */
+	w3cbw003c_pins: pinmux_w3cbw003c_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)		/* gpmc_ncs3.gpio_54 */
+			OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4)		/* uart3_rts_sd.gpio_164 */
+		>;
+	};
+
+	hsusb2_pins: pinmux_hsusb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+			OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4)		/* i2c2_scl.gpio_168 */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_OUTPUT | MUX_MODE4)		/* i2c2_sda.gpio_183 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+/* i2c2 pins are used for gpio */
+&i2c2 {
+	status = "disabled";
+};
+
+/* on board microSD slot */
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+};
+
+/* optional on board WiFi */
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&w3cbw003c_npoweron>;
+	vqmmc-supply = <&w3cbw003c_bt_nreset>;
+	vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
+	bus-width = <4>;
+	cap-sdio-irq;
+	non-removable;
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
diff --git a/src/arm/omap3-overo-chestnut43-common.dtsi b/src/arm/omap3-overo-chestnut43-common.dtsi
new file mode 100644
index 000000000000..17b82f82638a
--- /dev/null
+++ b/src/arm/omap3-overo-chestnut43-common.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			gpio-key,wakeup;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
+
+	ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
+
diff --git a/src/arm/omap3-overo-chestnut43.dts b/src/arm/omap3-overo-chestnut43.dts
new file mode 100644
index 000000000000..fe0824aca3c0
--- /dev/null
+++ b/src/arm/omap3-overo-chestnut43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Chestnut43";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-common-dvi.dtsi b/src/arm/omap3-overo-common-dvi.dtsi
new file mode 100644
index 000000000000..802f704f67e5
--- /dev/null
+++ b/src/arm/omap3-overo-common-dvi.dtsi
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * DVI output for some Gumstix Overo boards (Tobi and Summit)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &dvi0;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+};
+
diff --git a/src/arm/omap3-overo-common-lcd35.dtsi b/src/arm/omap3-overo-common-lcd35.dtsi
new file mode 100644
index 000000000000..233c69e50ae3
--- /dev/null
+++ b/src/arm/omap3-overo-common-lcd35.dtsi
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lb035_pins: pinmux_lb035_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
+
+		default-on;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	lcd0: display@0 {
+		compatible = "lgphilips,lb035q02";
+		label = "lcd";
+
+		reg = <1>;					/* CS1 */
+		spi-max-frequency = <10000000>;
+		spi-cpol;
+		spi-cpha;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lb035_pins>;
+		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;	/* gpio_144 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 0>;			/* gpio_114 */
+		pendown-gpio = <&gpio4 18 0>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		linux,wakeup;
+	};
+};
diff --git a/src/arm/omap3-overo-common-lcd43.dtsi b/src/arm/omap3-overo-common-lcd43.dtsi
new file mode 100644
index 000000000000..f5395b7da912
--- /dev/null
+++ b/src/arm/omap3-overo-common-lcd43.dtsi
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
+ */
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lte430_pins: pinmux_lte430_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4)	/* uart2_cts.gpio_144 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4)	/* uart2_rts.gpio_145 */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* csi2_dx1.gpio_114 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	lcd0: display@0 {
+		compatible = "samsung,lte430wq-f0c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lte430_pins>;
+		enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;		/* gpio_144 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9200000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <8>;
+			hback-porch = <4>;
+			hsync-len = <41>;
+			vback-porch = <2>;
+			vfront-porch = <4>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;		/* gpio_145 */
+
+		default-on;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 0>;			/* gpio_114 */
+		pendown-gpio = <&gpio4 18 0>;
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		linux,wakeup;
+	};
+};
+
diff --git a/src/arm/omap3-overo-common-peripherals.dtsi b/src/arm/omap3-overo-common-peripherals.dtsi
new file mode 100644
index 000000000000..520453d95704
--- /dev/null
+++ b/src/arm/omap3-overo-common-peripherals.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...)
+ */
+
+/ {
+	lis33_3v3: lis33-3v3-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "lis33-3v3-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	lis33_1v8: lis33-1v8-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "lis33-1v8-reg";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&omap3_pmx_core {
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+
+	/* optional 1K EEPROM with revision information */
+	eeprom@51 {
+		compatible = "atmel,24c01";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+
+	lis33de: lis33de@1d {
+		compatible = "st,lis33de", "st,lis3lv02d";
+		reg = <0x1d>;
+		Vdd-supply = <&lis33_1v8>;
+		Vdd_IO-supply = <&lis33_3v3>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&uart3 {
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
diff --git a/src/arm/omap3-overo-gallop43-common.dtsi b/src/arm/omap3-overo-gallop43-common.dtsi
new file mode 100644
index 000000000000..49d2254a99b0
--- /dev/null
+++ b/src/arm/omap3-overo-gallop43-common.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			gpio-key,wakeup;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&usbhshost {
+	status = "disabled";
+};
+
diff --git a/src/arm/omap3-overo-gallop43.dts b/src/arm/omap3-overo-gallop43.dts
new file mode 100644
index 000000000000..241f5c1914e0
--- /dev/null
+++ b/src/arm/omap3-overo-gallop43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Gallop43";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-palo43-common.dtsi b/src/arm/omap3-overo-palo43-common.dtsi
new file mode 100644
index 000000000000..087aedf5b902
--- /dev/null
+++ b/src/arm/omap3-overo-palo43-common.dtsi
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-lcd43.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+		gpio22 {
+			label = "overo:blue:gpio22";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;		/* gpio_22 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@23 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;		/* gpio_23 */
+			gpio-key,wakeup;
+		};
+		button1@14 {
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;		/* gpio_14 */
+			gpio-key,wakeup;
+		};
+	};
+};
+
diff --git a/src/arm/omap3-overo-palo43.dts b/src/arm/omap3-overo-palo43.dts
new file mode 100644
index 000000000000..cedb103b4b66
--- /dev/null
+++ b/src/arm/omap3-overo-palo43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Palo43";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-storm-alto35.dts b/src/arm/omap3-overo-storm-alto35.dts
new file mode 100644
index 000000000000..e9cae52afc25
--- /dev/null
+++ b/src/arm/omap3-overo-storm-alto35.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-alto35-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Alto35";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
diff --git a/src/arm/omap3-overo-storm-chestnut43.dts b/src/arm/omap3-overo-storm-chestnut43.dts
new file mode 100644
index 000000000000..7d82fdfd9909
--- /dev/null
+++ b/src/arm/omap3-overo-storm-chestnut43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Chestnut43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-chestnut43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Chestnut43";
+	compatible = "gumstix,omap3-overo-chestnut43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-storm-gallop43.dts b/src/arm/omap3-overo-storm-gallop43.dts
new file mode 100644
index 000000000000..a1b57e0cf37f
--- /dev/null
+++ b/src/arm/omap3-overo-storm-gallop43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Gallop43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-gallop43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Gallop43";
+	compatible = "gumstix,omap3-overo-gallop43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-storm-palo43.dts b/src/arm/omap3-overo-storm-palo43.dts
new file mode 100644
index 000000000000..b585d8fbc347
--- /dev/null
+++ b/src/arm/omap3-overo-storm-palo43.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Palo43 expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-palo43-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo43";
+	compatible = "gumstix,omap3-overo-palo43", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+			OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4)	/* etk_d8.gpio_22 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4)	/* etk_d9.gpio_23 */
+			OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4)	/* etk_d0.gpio_14 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-storm-summit.dts b/src/arm/omap3-overo-storm-summit.dts
new file mode 100644
index 000000000000..a0d7fd8369d7
--- /dev/null
+++ b/src/arm/omap3-overo-storm-summit.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Summit";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-storm-tobi.dts b/src/arm/omap3-overo-storm-tobi.dts
new file mode 100644
index 000000000000..879383acad87
--- /dev/null
+++ b/src/arm/omap3-overo-storm-tobi.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo-storm.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+
diff --git a/src/arm/omap3-overo-storm.dtsi b/src/arm/omap3-overo-storm.dtsi
new file mode 100644
index 000000000000..6cb418b4124a
--- /dev/null
+++ b/src/arm/omap3-overo-storm.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-base.dtsi"
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
+	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-summit-common.dtsi b/src/arm/omap3-overo-summit-common.dtsi
new file mode 100644
index 000000000000..0ac97ba98549
--- /dev/null
+++ b/src/arm/omap3-overo-summit-common.dtsi
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-dvi.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;		/* gpio_21 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
+
diff --git a/src/arm/omap3-overo-summit.dts b/src/arm/omap3-overo-summit.dts
new file mode 100644
index 000000000000..69765609455a
--- /dev/null
+++ b/src/arm/omap3-overo-summit.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Summit expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-summit-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Summit";
+	compatible = "gumstix,omap3-overo-summit", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4)	/* etk_d7.gpio_21 */
+		>;
+	};
+};
+
diff --git a/src/arm/omap3-overo-tobi-common.dtsi b/src/arm/omap3-overo-tobi-common.dtsi
new file mode 100644
index 000000000000..9e24b6a1d07b
--- /dev/null
+++ b/src/arm/omap3-overo-tobi-common.dtsi
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common-peripherals.dtsi"
+#include "omap3-overo-common-dvi.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "overo:red:gpio21";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+#include "omap-gpmc-smsc9221.dtsi"
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
+
+	ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
+	};
+};
+
+&lis33de {
+	status = "disabled";
+};
+
diff --git a/src/arm/omap3-overo-tobi.dts b/src/arm/omap3-overo-tobi.dts
new file mode 100644
index 000000000000..fd6400efcdee
--- /dev/null
+++ b/src/arm/omap3-overo-tobi.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap3-overo.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Tobi";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+
diff --git a/src/arm/omap3-overo.dtsi b/src/arm/omap3-overo.dtsi
new file mode 100644
index 000000000000..69ca7c45bca2
--- /dev/null
+++ b/src/arm/omap3-overo.dtsi
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap34xx.dtsi"
+#include "omap3-overo-base.dtsi"
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusb2_2_pins
+	>;
+
+	hsusb2_2_pins: pinmux_hsusb2_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+		>;
+	};
+
+	w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)		/* etk_d2.gpio_16 */
+		>;
+	};
+};
+
+&mcbsp2 {
+	status = "okay";
+};
diff --git a/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi b/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi
new file mode 100644
index 000000000000..f4b1a61853e3
--- /dev/null
+++ b/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi
@@ -0,0 +1,71 @@
+/*
+ * Common file for omap dpi panels with QVGA and reset pins
+ *
+ * Note that the board specifc DTS file needs to specify
+ * at minimum the GPIO enable-gpios for display, and
+ * gpios for gpio-backlight.
+ */
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	backlight0: backlight {
+		compatible = "gpio-backlight";
+		default-on;
+	};
+
+	/* 3.3V GPIO controlled regulator for LCD_ENVDD */
+	lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <70000>;
+	};
+
+	lcd0: display {
+		compatible = "sharp,ls037v7dw01";
+		label = "lcd";
+		power-supply = <&lcd_3v3>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <18>;
+		};
+	};
+};
+
+&mcspi1 {
+	tsc2046@0 {
+		reg = <0>;			/* CS0 */
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <1000000>;
+		vcc-supply = <&lcd_3v3>;
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <8000>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4800>;
+		ti,x-plate-ohms = /bits/ 16 <40>;
+		ti,pressure-max = /bits/ 16 <255>;
+		ti,swap-xy;
+		linux,wakeup;
+	};
+};
diff --git a/src/arm/omap3-sb-t35.dtsi b/src/arm/omap3-sb-t35.dtsi
new file mode 100644
index 000000000000..827f614261f6
--- /dev/null
+++ b/src/arm/omap3-sb-t35.dtsi
@@ -0,0 +1,138 @@
+/*
+ * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
+ */
+
+/ {
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+
+		powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;  /* gpio_54 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tfp410_pins>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	audio_amp: audio_amp {
+		compatible = "regulator-fixed";
+		regulator-name = "audio_amp";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sb_t35_audio_amp>;
+		gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;   /* gpio_61 */
+		enable-active-low;
+		regulator-always-on;
+	};
+};
+
+&omap3_pmx_core {
+	smsc2_pins: pinmux_smsc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs4.gpmc_ncs4 */
+			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
+		>;
+	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs3.gpio_54 */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+		>;
+	};
+
+	sb_t35_audio_amp: pinmux_sb_t35_audio_amp {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */
+		>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+&gpmc {
+	ranges = <4 0 0x2d000000 0x01000000>;
+
+	smsc2: ethernet@4,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc2_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		reg = <4 0 0xff>;
+		bank-width = <2>;
+		gpmc,device-width = <1>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cs-on-ns = <5>;
+		gpmc,cs-rd-off-ns = <150>;
+		gpmc,cs-wr-off-ns = <150>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <15>;
+		gpmc,adv-wr-off-ns = <40>;
+		gpmc,oe-on-ns = <45>;
+		gpmc,oe-off-ns = <140>;
+		gpmc,we-on-ns = <45>;
+		gpmc,we-off-ns = <140>;
+		gpmc,rd-cycle-ns = <155>;
+		gpmc,wr-cycle-ns = <155>;
+		gpmc,access-ns = <120>;
+		gpmc,page-burst-access-ns = <20>;
+		gpmc,bus-turnaround-ns = <75>;
+		gpmc,cycle2cycle-delay-ns = <75>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
+		reg-io-width = <4>;
+		smsc,save-mac-address;
+	};
+};
diff --git a/src/arm/omap3-sbc-t3517.dts b/src/arm/omap3-sbc-t3517.dts
new file mode 100644
index 000000000000..c2d5c28a1a70
--- /dev/null
+++ b/src/arm/omap3-sbc-t3517.dts
@@ -0,0 +1,75 @@
+/*
+ * Suppport for CompuLab SBC-T3517 with CM-T3517
+ */
+
+#include "omap3-cm-t3517.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+	model = "CompuLab SBC-T3517 with CM-T3517";
+	compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+
+	/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
+	vddvario: regulator-vddvario-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddvario";
+		regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a-sb-t35 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&sb_t35_usb_hub_pins
+			&usb_hub_pins
+		    >;
+
+	mmc1_aux_pins: pinmux_mmc1_aux_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59   */
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
+		>;
+	};
+
+	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc1_pins
+		&mmc1_aux_pins
+	>;
+
+	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
+	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+};
+
+&dss {
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&gpmc {
+	ranges = <4 0 0x2d000000 0x01000000>,	/* SB-T35 SMSC9x Eth */
+		 <0 0 0x00000000 0x01000000>;	/* CM-T3x NAND */
+};
diff --git a/src/arm/omap3-sbc-t3530.dts b/src/arm/omap3-sbc-t3530.dts
new file mode 100644
index 000000000000..834bc786cd12
--- /dev/null
+++ b/src/arm/omap3-sbc-t3530.dts
@@ -0,0 +1,47 @@
+/*
+ * Suppport for CompuLab SBC-T3530 with CM-T3530
+ */
+
+#include "omap3-cm-t3530.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+	model = "CompuLab SBC-T3530 with CM-T3530";
+	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sb_t35_usb_hub_pins>;
+
+	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
+		>;
+	};
+};
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x01000000>,	/* CM-T3x30 SMSC9x Eth */
+		 <4 0 0x2d000000 0x01000000>,	/* SB-T35 SMSC9x Eth */
+		 <0 0 0x00000000 0x01000000>;	/* CM-T3x NAND */
+};
+
+&mmc1 {
+	cd-gpios =  <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&dss {
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
diff --git a/src/arm/omap3-sbc-t3730.dts b/src/arm/omap3-sbc-t3730.dts
new file mode 100644
index 000000000000..73c7bf4a4a08
--- /dev/null
+++ b/src/arm/omap3-sbc-t3730.dts
@@ -0,0 +1,43 @@
+/*
+ * Suppport for CompuLab SBC-T3730 with CM-T3730
+ */
+
+#include "omap3-cm-t3730.dts"
+#include "omap3-sb-t35.dtsi"
+
+/ {
+	model = "CompuLab SBC-T3730 with CM-T3730";
+	compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &tv0;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sb_t35_usb_hub_pins>;
+
+	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
+		>;
+	};
+};
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x01000000>,	/* CM-T3x30 SMSC9x Eth */
+		 <4 0 0x2d000000 0x01000000>,	/* SB-T35 SMSC9x Eth */
+		 <0 0 0x00000000 0x01000000>;	/* CM-T3x NAND */
+};
+
+&dss {
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
diff --git a/src/arm/omap3-tao3530.dtsi b/src/arm/omap3-tao3530.dtsi
new file mode 100644
index 000000000000..e89820a6776e
--- /dev/null
+++ b/src/arm/omap3-tao3530.dtsi
@@ -0,0 +1,337 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx-hs.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;	/* gpio_162 */
+		vcc-supply = <&hsusb2_power>;
+	};
+
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		/* McBSP2 is used for onboard sound, same as on beagle */
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
+	/* Regulator to enable/switch the vcc of the Wifi module */
+	mmc2_sdio_poweron: regulator-mmc2-sdio-poweron {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-mmc2-sdio-poweron";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		gpio = <&gpio5 29 GPIO_ACTIVE_LOW>;		/* gpio_157 */
+		enable-active-low;
+		startup-delay-us = <10000>;
+	};
+};
+
+&omap3_pmx_core {
+	hsusbb2_pins: pinmux_hsusbb2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		/* etk_d10.hsusb2_clk */
+			OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		/* etk_d11.hsusb2_stp */
+			OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
+			OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
+			OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
+			OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
+			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
+			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
+			OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
+			OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
+		>;
+	};
+
+	/* wlan GPIO output for WLAN_EN */
+	wlan_gpio: pinmux_wlan_gpio {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr gpio_157 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl.i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda.i2c3_sda */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk.mcspi1_clk */
+			OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0)	/* mcspi1_simo.mcspi1_simo */
+			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0)	/* mcspi1_somi.mcspi1_somi */
+			OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0)	/* mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+                        OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1)	/* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */
+                        OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1)	/* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */
+                        OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1)	/* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */
+                        OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1)	/* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */
+		>;
+	};
+
+	mcbsp3_pins: pinmux_mcbsp3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)	/* mcbsp3_dx.uart2_cts */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)	/* mcbsp3_dr.uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clk.uart2_tx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0)	/* mcbsp3_fsx.uart2_rx */
+		>;
+	};
+};
+
+/* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */
+&mcbsp1 {
+	status = "disabled";
+};
+
+&mcbsp2 {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	spidev@0 {
+		compatible = "spidev";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpha;
+	};
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+
+	spidev@0 {
+		compatible = "spidev";
+		spi-max-frequency = <48000000>;
+		reg = <0>;
+		spi-cpha;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	cd-gpios = <&twl_gpio 0 0>;
+	bus-width = <8>;
+};
+
+// WiFi (Marvell 88W8686) on MMC2/SDIO
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&mmc2_sdio_poweron>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&mcbsp3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x01000000>;
+
+	nand@0,0 {
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;	/* GPMC_DEVWIDTH_16BIT */
+		ti,nand-ecc-opt = "sw";
+
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <36>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <24>;
+		gpmc,adv-wr-off-ns = <36>;
+		gpmc,oe-on-ns = <6>;
+		gpmc,oe-off-ns = <48>;
+		gpmc,we-on-ns = <6>;
+		gpmc,we-off-ns = <30>;
+		gpmc,rd-cycle-ns = <72>;
+		gpmc,wr-cycle-ns = <72>;
+		gpmc,access-ns = <54>;
+		gpmc,wr-access-ns = <30>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "U-Boot Env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x400000>;
+		};
+
+		filesystem@680000 {
+			label = "File System";
+			reg = <0x680000 0xf980000>;
+		};
+	};
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
+
+&vaux2 {
+	regulator-name = "vdd_ehci";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
diff --git a/src/arm/omap3-thunder.dts b/src/arm/omap3-thunder.dts
new file mode 100644
index 000000000000..d659515ab9b8
--- /dev/null
+++ b/src/arm/omap3-thunder.dts
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-tao3530.dtsi"
+
+/ {
+	model = "TI OMAP3 Thunder baseboard with TAO3530 SOM";
+	compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
+			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
+			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
+			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
+			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
+			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
+			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
+			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
+		>;
+	};
+
+	lte430_pins: pinmux_lte430_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
+		>;
+	};
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+	regulator-always-on;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+/ {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	lcd0: display@0 {
+		compatible = "samsung,lte430wq-f0c", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lte430_pins>;
+		enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;	/* gpio_138 */
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		panel-timing {
+			clock-frequency = <9000000>;
+			hactive = <480>;
+			vactive = <272>;
+			hfront-porch = <3>;
+			hback-porch = <2>;
+			hsync-len = <42>;
+			vback-porch = <2>;
+			vfront-porch = <3>;
+			vsync-len = <11>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>;		/* gpio_139 */
+
+		default-on;
+	};
+};
diff --git a/src/arm/omap3-zoom3.dts b/src/arm/omap3-zoom3.dts
new file mode 100644
index 000000000000..6644f516a42b
--- /dev/null
+++ b/src/arm/omap3-zoom3.dts
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap-zoom-common.dtsi"
+
+/ {
+	model = "TI Zoom3";
+	compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio4 5 0>;	/* gpio101 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&omap3_pmx_core {
+	/* REVISIT: twl gpio0 is mmc0_cd */
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat3.sdmmc2_dat3 */
+			0x134 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat4.sdmmc2_dat4 */
+			0x136 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat5.sdmmc2_dat5 */
+			0x138 (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat6.sdmmc2_dat6 */
+			0x13a (PIN_INPUT | MUX_MODE0)		/* sdmmc2_dat7.sdmmc2_dat7 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkx.gpio_162 WLAN IRQ */
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3)	/* mcspi1_cs1.sdmmc3_cmd */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+                        0x150 (PIN_INPUT | MUX_MODE0)		/* uart1_cts.uart1_cts */
+                        0x14e (PIN_OUTPUT | MUX_MODE0)		/* uart1_rts.uart1_rts */
+                        0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+                        0x14c (PIN_OUTPUT | MUX_MODE0)		/* uart1_tx.uart1_tx */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+                        0x144 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+                        0x146 (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+                        0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+                        0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+                        0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+                        0x16c (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+                        0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+                        0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0xea (PIN_OUTPUT| MUX_MODE4)		/* cam_d2.gpio_101 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	mmc3_2_pins: pinmux_mmc3_2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_clk.sdmmc3_clk */
+			OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d4.sdmmc3_dat0 */
+			OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+			OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d6.sdmmc3_dat2 */
+			OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)	/* etk_d3.sdmmc3_dat3 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	wlan_host_wkup: pinmux_wlan_host_wkup_pins {
+		pinctrl-single,pins = <
+			0x1a (PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+#include "twl4030.dtsi"
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	/*
+	 * TVP5146 Video decoder-in for analog input support.
+	 */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+/*
+&mmc2 {
+	vmmc-supply = <&vmmc2>;
+	ti,non-removable;
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+*/
+&mmc3 {
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &mmc3_2_pins>;
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+       status = "disabled";
+};
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	mode = <3>;
+	power = <50>;
+};
diff --git a/src/arm/omap3.dtsi b/src/arm/omap3.dtsi
new file mode 100644
index 000000000000..01b71111bd55
--- /dev/null
+++ b/src/arm/omap3.dtsi
@@ -0,0 +1,815 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap3430", "ti,omap3";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0x0>;
+
+			clocks = <&dpll1_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		reg = <0x54000000 0x800000>;
+		interrupts = <3>;
+		ti,hwmods = "debugss";
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+
+		iva: iva {
+			compatible = "ti,iva2.2";
+			ti,hwmods = "iva";
+
+			dsp {
+				compatible = "ti,omap3-c64";
+			};
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap3-l3-smx", "simple-bus";
+		reg = <0x68000000 0x10000>;
+		interrupts = <9 10>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		aes: aes@480c5000 {
+			compatible = "ti,omap3-aes";
+			ti,hwmods = "aes";
+			reg = <0x480c5000 0x50>;
+			interrupts = <0>;
+		};
+
+		prm: prm@48306000 {
+			compatible = "ti,omap3-prm";
+			reg = <0x48306000 0x4000>;
+			interrupts = <11>;
+
+			prm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prm_clockdomains: clockdomains {
+			};
+		};
+
+		cm: cm@48004000 {
+			compatible = "ti,omap3-cm";
+			reg = <0x48004000 0x4000>;
+
+			cm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@48002000 {
+			compatible = "ti,omap3-scrm";
+			reg = <0x48002000 0x2000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		counter32k: counter@48320000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x48320000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,omap3-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		sdma: dma-controller@48056000 {
+			compatible = "ti,omap3630-sdma", "ti,omap3430-sdma";
+			reg = <0x48056000 0x1000>;
+			interrupts = <12>,
+				     <13>,
+				     <14>,
+				     <15>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <96>;
+		};
+
+		omap3_pmx_core: pinmux@48002030 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x48002030 0x0238>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
+
+		omap3_pmx_wkup: pinmux@48002a00 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x48002a00 0x5c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
+
+		omap3_scm_general: tisyscon@48002270 {
+			compatible = "syscon";
+			reg = <0x48002270 0x2f0>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x2b0 0x4>;
+			syscon = <&omap3_scm_general>;
+			pbias_mmc_reg: pbias_mmc_omap2430 {
+				regulator-name = "pbias_mmc_omap2430";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
+		gpio1: gpio@48310000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x48310000 0x200>;
+			interrupts = <29>;
+			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@49050000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49050000 0x200>;
+			interrupts = <30>;
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@49052000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49052000 0x200>;
+			interrupts = <31>;
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@49054000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49054000 0x200>;
+			interrupts = <32>;
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@49056000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49056000 0x200>;
+			interrupts = <33>;
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio@49058000 {
+			compatible = "ti,omap3-gpio";
+			reg = <0x49058000 0x200>;
+			interrupts = <34>;
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x4806a000 0x2000>;
+			interrupts-extended = <&intc 72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x4806c000 0x400>;
+			interrupts-extended = <&intc 73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+		};
+
+		uart3: serial@49020000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x49020000 0x400>;
+			interrupts-extended = <&intc 74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap3-i2c";
+			reg = <0x48070000 0x80>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap3-i2c";
+			reg = <0x48072000 0x80>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap3-i2c";
+			reg = <0x48060000 0x80>;
+			interrupts = <61>;
+			dmas = <&sdma 25 &sdma 26>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap3-mailbox";
+			ti,hwmods = "mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <2>;
+			ti,mbox-num-fifos = <2>;
+			mbox_dsp: dsp {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <1 0 0>;
+			};
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>,
+			       <&sdma 16>,
+			       <&sdma 23>,
+			       <&sdma 24>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap2-mcspi";
+			reg = <0x480ba000 0x100>;
+			interrupts = <48>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
+		};
+
+		hdqw1w: 1w@480b2000 {
+			compatible = "ti,omap3-1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+			ti,hwmods = "hdq1w";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap3-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap3-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
+			ti,hwmods = "mmc2";
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap3-hsmmc";
+			reg = <0x480ad000 0x200>;
+			interrupts = <94>;
+			ti,hwmods = "mmc3";
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
+		};
+
+		mmu_isp: mmu@480bd400 {
+			compatible = "ti,omap2-iommu";
+			reg = <0x480bd400 0x80>;
+			interrupts = <24>;
+			ti,hwmods = "mmu_isp";
+			ti,#tlb-entries = <8>;
+		};
+
+		mmu_iva: mmu@5d000000 {
+			compatible = "ti,omap2-iommu";
+			reg = <0x5d000000 0x80>;
+			interrupts = <28>;
+			ti,hwmods = "mmu_iva";
+			status = "disabled";
+		};
+
+		wdt2: wdt@48314000 {
+			compatible = "ti,omap3-wdt";
+			reg = <0x48314000 0x80>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		mcbsp1: mcbsp@48074000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48074000 0xff>;
+			reg-names = "mpu";
+			interrupts = <16>, /* OCP compliant interrupt */
+				     <59>, /* TX interrupt */
+				     <60>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+			dmas = <&sdma 31>,
+			       <&sdma 32>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp2: mcbsp@49022000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49022000 0xff>,
+			      <0x49028000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <17>, /* OCP compliant interrupt */
+				     <62>, /* TX interrupt */
+				     <63>, /* RX interrupt */
+				     <4>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			ti,buffer-size = <1280>;
+			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
+			dmas = <&sdma 33>,
+			       <&sdma 34>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp3: mcbsp@49024000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49024000 0xff>,
+			      <0x4902a000 0xff>;
+			reg-names = "mpu", "sidetone";
+			interrupts = <22>, /* OCP compliant interrupt */
+				     <89>, /* TX interrupt */
+				     <90>, /* RX interrupt */
+				     <5>;  /* Sidetone */
+			interrupt-names = "common", "tx", "rx", "sidetone";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
+			dmas = <&sdma 17>,
+			       <&sdma 18>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp4: mcbsp@49026000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x49026000 0xff>;
+			reg-names = "mpu";
+			interrupts = <23>, /* OCP compliant interrupt */
+				     <54>, /* TX interrupt */
+				     <55>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+			dmas = <&sdma 19>,
+			       <&sdma 20>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp5: mcbsp@48096000 {
+			compatible = "ti,omap3-mcbsp";
+			reg = <0x48096000 0xff>;
+			reg-names = "mpu";
+			interrupts = <27>, /* OCP compliant interrupt */
+				     <81>, /* TX interrupt */
+				     <82>; /* RX interrupt */
+			interrupt-names = "common", "tx", "rx";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp5";
+			dmas = <&sdma 21>,
+			       <&sdma 22>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		sham: sham@480c3000 {
+			compatible = "ti,omap3-sham";
+			ti,hwmods = "sham";
+			reg = <0x480c3000 0x64>;
+			interrupts = <49>;
+		};
+
+		smartreflex_core: smartreflex@480cb000 {
+			compatible = "ti,omap3-smartreflex-core";
+			ti,hwmods = "smartreflex_core";
+			reg = <0x480cb000 0x400>;
+			interrupts = <19>;
+		};
+
+		smartreflex_mpu_iva: smartreflex@480c9000 {
+			compatible = "ti,omap3-smartreflex-iva";
+			ti,hwmods = "smartreflex_mpu_iva";
+			reg = <0x480c9000 0x400>;
+			interrupts = <18>;
+		};
+
+		timer1: timer@48318000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48318000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@49032000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49032000 0x400>;
+			interrupts = <38>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@49034000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49034000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@49036000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49036000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@49038000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49038000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4903a000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x4903a000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4903c000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x4903c000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4903e000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x4903e000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@49040000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x49040000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@48304000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48304000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer12";
+			ti,timer-alwon;
+			ti,timer-secure;
+		};
+
+		usbhstll: usbhstll@48062000 {
+			compatible = "ti,usbhs-tll";
+			reg = <0x48062000 0x1000>;
+			interrupts = <78>;
+			ti,hwmods = "usb_tll_hs";
+		};
+
+		usbhshost: usbhshost@48064000 {
+			compatible = "ti,usbhs-host";
+			reg = <0x48064000 0x400>;
+			ti,hwmods = "usb_host_hs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbhsohci: ohci@48064400 {
+				compatible = "ti,ohci-omap3";
+				reg = <0x48064400 0x400>;
+				interrupt-parent = <&intc>;
+				interrupts = <76>;
+			};
+
+			usbhsehci: ehci@48064800 {
+				compatible = "ti,ehci-omap";
+				reg = <0x48064800 0x400>;
+				interrupt-parent = <&intc>;
+				interrupts = <77>;
+			};
+		};
+
+		gpmc: gpmc@6e000000 {
+			compatible = "ti,omap3430-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x6e000000 0x02d0>;
+			interrupts = <20>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		usb_otg_hs: usb_otg_hs@480ab000 {
+			compatible = "ti,omap3-musb";
+			reg = <0x480ab000 0x1000>;
+			interrupts = <92>, <93>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			multipoint = <1>;
+			num-eps = <16>;
+			ram-bits = <12>;
+		};
+
+		dss: dss@48050000 {
+			compatible = "ti,omap3-dss";
+			reg = <0x48050000 0x200>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&dss1_alwon_fck>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@48050400 {
+				compatible = "ti,omap3-dispc";
+				reg = <0x48050400 0x400>;
+				interrupts = <25>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss1_alwon_fck>;
+				clock-names = "fck";
+			};
+
+			dsi: encoder@4804fc00 {
+				compatible = "ti,omap3-dsi";
+				reg = <0x4804fc00 0x200>,
+				      <0x4804fe00 0x40>,
+				      <0x4804ff00 0x20>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <25>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi1";
+				clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			rfbi: encoder@48050800 {
+				compatible = "ti,omap3-rfbi";
+				reg = <0x48050800 0x100>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+				clocks = <&dss1_alwon_fck>, <&dss_ick>;
+				clock-names = "fck", "ick";
+			};
+
+			venc: encoder@48050c00 {
+				compatible = "ti,omap3-venc";
+				reg = <0x48050c00 0x100>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+				clocks = <&dss_tv_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		ssi: ssi-controller@48058000 {
+			compatible = "ti,omap3-ssi";
+			ti,hwmods = "ssi";
+
+			status = "disabled";
+
+			reg = <0x48058000 0x1000>,
+			      <0x48059000 0x1000>;
+			reg-names = "sys",
+				    "gdd";
+
+			interrupts = <71>;
+			interrupt-names = "gdd_mpu";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ssi_port1: ssi-port@4805a000 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805a000 0x800>,
+				      <0x4805a800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupt-parent = <&intc>;
+				interrupts = <67>,
+					     <68>;
+			};
+
+			ssi_port2: ssi-port@4805b000 {
+				compatible = "ti,omap3-ssi-port";
+
+				reg = <0x4805b000 0x800>,
+				      <0x4805b800 0x800>;
+				reg-names = "tx",
+					    "rx";
+
+				interrupt-parent = <&intc>;
+				interrupts = <69>,
+					     <70>;
+			};
+		};
+	};
+};
+
+/include/ "omap3xxx-clocks.dtsi"
diff --git a/src/arm/omap3430-sdp.dts b/src/arm/omap3430-sdp.dts
new file mode 100644
index 000000000000..16b0cdfbee9c
--- /dev/null
+++ b/src/arm/omap3430-sdp.dts
@@ -0,0 +1,193 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+
+/ {
+	model = "TI OMAP3430 SDP";
+	compatible = "ti,omap3430-sdp", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	/*
+	 * S6-3 must be in ON position for 8 bit mode to function
+	 * Else, use 4 bit mode
+	 */
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&gpmc {
+	ranges = <0 0 0x10000000 0x08000000>,
+		 <1 0 0x28000000 0x1000000>,	/* CS1: 16MB for NAND */
+		 <2 0 0x20000000 0x1000000>;	/* CS2: 16MB for OneNAND */
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		linux,mtd-name= "intel,pf48f6000m0y1be";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x08000000>;
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <186>;
+		gpmc,cs-wr-off-ns = <186>;
+		gpmc,adv-on-ns = <12>;
+		gpmc,adv-rd-off-ns = <48>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <114>;
+		gpmc,page-burst-access-ns = <6>;
+		gpmc,bus-turnaround-ns = <12>;
+		gpmc,cycle2cycle-delay-ns = <18>;
+		gpmc,wr-data-mux-bus-ns = <90>;
+		gpmc,wr-access-ns = <186>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		partition@0 {
+			label = "bootloader-nor";
+			reg = <0 0x40000>;
+		};
+		partition@40000 {
+			label = "params-nor";
+			reg = <0x40000 0x40000>;
+		};
+		partition@80000 {
+			label = "kernel-nor";
+			reg = <0x80000 0x200000>;
+		};
+		partition@280000 {
+			label = "filesystem-nor";
+			reg = <0x240000 0x7d80000>;
+		};
+	};
+
+	nand@1,0 {
+		linux,mtd-name= "micron,mt29f1g08abb";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <1 0 4>;	/* CS1, offset 0, IO size 4 */
+		ti,nand-ecc-opt = "sw";
+		nand-bus-width = <8>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <36>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <24>;
+		gpmc,adv-wr-off-ns = <36>;
+		gpmc,oe-on-ns = <6>;
+		gpmc,oe-off-ns = <48>;
+		gpmc,we-on-ns = <6>;
+		gpmc,we-off-ns = <30>;
+		gpmc,rd-cycle-ns = <72>;
+		gpmc,wr-cycle-ns = <72>;
+		gpmc,access-ns = <54>;
+		gpmc,wr-access-ns = <30>;
+
+		partition@0 {
+			label = "xloader-nand";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "bootloader-nand";
+			reg = <0x80000 0x140000>;
+		};
+		partition@1c0000 {
+			label = "params-nand";
+			reg = <0x1c0000 0xc0000>;
+		};
+		partition@280000 {
+			label = "kernel-nand";
+			reg = <0x280000 0x500000>;
+		};
+		partition@780000 {
+			label = "filesystem-nand";
+			reg = <0x780000 0x7880000>;
+		};
+	};
+
+	onenand@2,0 {
+		linux,mtd-name= "samsung,kfm2g16q2m-deb8";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <2 0 0x20000>;	/* CS2, offset 0, IO size 4 */
+
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <84>;
+		gpmc,cs-wr-off-ns = <72>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <18>;
+		gpmc,adv-wr-off-ns = <18>;
+		gpmc,oe-on-ns = <30>;
+		gpmc,oe-off-ns = <84>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <42>;
+		gpmc,rd-cycle-ns = <108>;
+		gpmc,wr-cycle-ns = <96>;
+		gpmc,access-ns = <78>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+
+		partition@0 {
+			label = "xloader-onenand";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "bootloader-onenand";
+			reg = <0x80000 0x40000>;
+		};
+		partition@c0000 {
+			label = "params-onenand";
+			reg = <0xc0000 0x20000>;
+		};
+		partition@e0000 {
+			label = "kernel-onenand";
+			reg = <0xe0000 0x200000>;
+		};
+		partition@2e0000 {
+			label = "filesystem-onenand";
+			reg = <0x2e0000 0xfd20000>;
+		};
+	};
+};
diff --git a/src/arm/omap3430es1-clocks.dtsi b/src/arm/omap3430es1-clocks.dtsi
new file mode 100644
index 000000000000..4c22f3a7f813
--- /dev/null
+++ b/src/arm/omap3430es1-clocks.dtsi
@@ -0,0 +1,208 @@
+/*
+ * Device Tree Source for OMAP3430 ES1 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_clocks {
+	gfx_l3_ck: gfx_l3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0b10>;
+		ti,bit-shift = <0>;
+	};
+
+	gfx_l3_fck: gfx_l3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_ick>;
+		ti,max-div = <7>;
+		reg = <0x0b40>;
+		ti,index-starts-at-one;
+	};
+
+	gfx_l3_ick: gfx_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&gfx_l3_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gfx_cg1_ck: gfx_cg1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&gfx_l3_fck>;
+		reg = <0x0b00>;
+		ti,bit-shift = <1>;
+	};
+
+	gfx_cg2_ck: gfx_cg2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&gfx_l3_fck>;
+		reg = <0x0b00>;
+		ti,bit-shift = <2>;
+	};
+
+	d2d_26m_fck: d2d_26m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <3>;
+	};
+
+	fshostusb_fck: fshostusb_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <5>;
+	};
+
+	ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0a00>;
+	};
+
+	ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <8>;
+		reg = <0x0a40>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	};
+
+	ssi_ssr_fck: ssi_ssr_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_gate_fck_3430es1>, <&ssi_ssr_div_fck_3430es1>;
+	};
+
+	ssi_sst_fck: ssi_sst_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&ssi_ssr_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hsotgusb_ick_3430es1: hsotgusb_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	fac_ick: fac_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <8>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ssi_ick: ssi_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <0>;
+	};
+
+	usb_l4_gate_ick: usb_l4_gate_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-interface-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <5>;
+		reg = <0x0a10>;
+	};
+
+	usb_l4_div_ick: usb_l4_div_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <4>;
+		ti,max-div = <1>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	usb_l4_ick: usb_l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
+	};
+
+	dss1_alwon_fck: dss1_alwon_fck_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0e00>;
+		ti,set-rate-parent;
+	};
+
+	dss_ick: dss_ick_3430es1 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0e10>;
+		ti,bit-shift = <0>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es1>;
+	};
+
+	gfx_3430es1_clkdm: gfx_3430es1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gfx_l3_ck>, <&gfx_cg1_ck>, <&gfx_cg2_ck>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+			 <&dss1_alwon_fck>, <&dss_ick>;
+	};
+
+	d2d_clkdm: d2d_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&d2d_26m_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&fshostusb_fck>, <&fac_ick>, <&ssi_ick>;
+	};
+};
diff --git a/src/arm/omap34xx-hs.dtsi b/src/arm/omap34xx-hs.dtsi
new file mode 100644
index 000000000000..1ff626489546
--- /dev/null
+++ b/src/arm/omap34xx-hs.dtsi
@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap34xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+	status = "disabled";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&timer12 {
+	status = "disabled";
+};
diff --git a/src/arm/omap34xx-omap36xx-clocks.dtsi b/src/arm/omap34xx-omap36xx-clocks.dtsi
new file mode 100644
index 000000000000..b02017b7630e
--- /dev/null
+++ b/src/arm/omap34xx-omap36xx-clocks.dtsi
@@ -0,0 +1,268 @@
+/*
+ * Device Tree Source for OMAP34XX/OMAP36XX clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_clocks {
+	security_l4_ick2: security_l4_ick2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes1_ick: aes1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		ti,bit-shift = <3>;
+		reg = <0x0a14>;
+	};
+
+	rng_ick: rng_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <2>;
+	};
+
+	sha11_ick: sha11_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <1>;
+	};
+
+	des1_ick: des1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l4_ick2>;
+		reg = <0x0a14>;
+		ti,bit-shift = <0>;
+	};
+
+	cam_mclk: cam_mclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0f00>;
+		ti,set-rate-parent;
+	};
+
+	cam_ick: cam_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-no-wait-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0f10>;
+		ti,bit-shift = <0>;
+	};
+
+	csi2_96m_fck: csi2_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0f00>;
+		ti,bit-shift = <1>;
+	};
+
+	security_l3_ick: security_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pka_ick: pka_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&security_l3_ick>;
+		reg = <0x0a14>;
+		ti,bit-shift = <4>;
+	};
+
+	icr_ick: icr_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <29>;
+	};
+
+	des2_ick: des2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <26>;
+	};
+
+	mspro_ick: mspro_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <23>;
+	};
+
+	mailboxes_ick: mailboxes_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <7>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sr1_fck: sr1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <6>;
+	};
+
+	sr2_fck: sr2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <7>;
+	};
+
+	sr_l4_ick: sr_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll2_fck: dpll2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0040>;
+		ti,index-starts-at-one;
+	};
+
+	dpll2_ck: dpll2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll2_fck>;
+		reg = <0x0004>, <0x0024>, <0x0040>, <0x0034>;
+		ti,low-power-stop;
+		ti,lock;
+		ti,low-power-bypass;
+	};
+
+	dpll2_m2_ck: dpll2_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0044>;
+		ti,index-starts-at-one;
+	};
+
+	iva2_ck: iva2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll2_m2_ck>;
+		reg = <0x0000>;
+		ti,bit-shift = <0>;
+	};
+
+	modem_fck: modem_fck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <31>;
+	};
+
+	sad2d_ick: sad2d_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <3>;
+	};
+
+	mad2d_ick: mad2d_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <3>;
+	};
+
+	mspro_fck: mspro_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <23>;
+	};
+};
+
+&cm_clockdomains {
+	cam_clkdm: cam_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cam_ick>, <&csi2_96m_fck>;
+	};
+
+	iva2_clkdm: iva2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&iva2_ck>;
+	};
+
+	dpll2_clkdm: dpll2_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll2_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&sr1_fck>, <&sr2_fck>;
+	};
+
+	d2d_clkdm: d2d_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&modem_fck>, <&sad2d_ick>, <&mad2d_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>, <&icr_ick>,
+			 <&des2_ick>, <&mspro_ick>, <&mailboxes_ick>,
+			 <&mspro_fck>;
+	};
+};
diff --git a/src/arm/omap34xx.dtsi b/src/arm/omap34xx.dtsi
new file mode 100644
index 000000000000..3819c1e91591
--- /dev/null
+++ b/src/arm/omap34xx.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Device Tree Source for OMAP34xx/OMAP35xx SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			/* OMAP343x/OMAP35xx variants OPP1-5 */
+			operating-points = <
+				/* kHz    uV */
+				125000   975000
+				250000  1075000
+				500000  1200000
+				550000  1270000
+				600000  1350000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+
+	ocp {
+		omap3_pmx_core2: pinmux@480025d8 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x480025d8 0x24>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
+	};
+};
+
+&ssi {
+	status = "ok";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+};
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 000000000000..080fb3f4e429
--- /dev/null
+++ b/src/arm/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,242 @@
+/*
+ * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm_clocks {
+	corex2_d3_fck: corex2_d3_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	corex2_d5_fck: corex2_d5_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&corex2_fck>;
+		clock-mult = <1>;
+		clock-div = <5>;
+	};
+};
+&cm_clocks {
+	dpll5_ck: dpll5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d04>, <0x0d24>, <0x0d4c>, <0x0d34>;
+		ti,low-power-stop;
+		ti,lock;
+	};
+
+	dpll5_m2_ck: dpll5_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll5_ck>;
+		ti,max-div = <31>;
+		reg = <0x0d50>;
+		ti,index-starts-at-one;
+	};
+
+	sgx_gate_fck: sgx_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0b00>;
+	};
+
+	core_d3_ck: core_d3_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	core_d4_ck: core_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	core_d6_ck: core_d6_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <6>;
+	};
+
+	omap_192m_alwon_fck: omap_192m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_d2_ck: core_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	sgx_mux_fck: sgx_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>;
+		reg = <0x0b40>;
+	};
+
+	sgx_fck: sgx_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&sgx_gate_fck>, <&sgx_mux_fck>;
+	};
+
+	sgx_ick: sgx_ick {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&l3_ick>;
+		reg = <0x0b10>;
+		ti,bit-shift = <0>;
+	};
+
+	cpefuse_fck: cpefuse_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <0>;
+	};
+
+	ts_fck: ts_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_32k_fck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <1>;
+	};
+
+	usbtll_fck: usbtll_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x0a08>;
+		ti,bit-shift = <2>;
+	};
+
+	usbtll_ick: usbtll_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a18>;
+		ti,bit-shift = <2>;
+	};
+
+	mmchs3_ick: mmchs3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <30>;
+	};
+
+	mmchs3_fck: mmchs3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <30>;
+	};
+
+	dss1_alwon_fck: dss1_alwon_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&dpll4_m4x2_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0e00>;
+		ti,set-rate-parent;
+	};
+
+	dss_ick: dss_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x0e10>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_120m_fck: usbhost_120m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll5_m2_ck>;
+		reg = <0x1400>;
+		ti,bit-shift = <1>;
+	};
+
+	usbhost_48m_fck: usbhost_48m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,dss-gate-clock";
+		clocks = <&omap_48m_fck>;
+		reg = <0x1400>;
+		ti,bit-shift = <0>;
+	};
+
+	usbhost_ick: usbhost_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dss-interface-clock";
+		clocks = <&l4_ick>;
+		reg = <0x1410>;
+		ti,bit-shift = <0>;
+	};
+};
+
+&cm_clockdomains {
+	dpll5_clkdm: dpll5_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll5_ck>;
+	};
+
+	sgx_clkdm: sgx_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sgx_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>,
+			 <&dss1_alwon_fck>, <&dss_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>;
+	};
+
+	usbhost_clkdm: usbhost_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&usbhost_120m_fck>, <&usbhost_48m_fck>,
+			 <&usbhost_ick>;
+	};
+};
diff --git a/src/arm/omap36xx-clocks.dtsi b/src/arm/omap36xx-clocks.dtsi
new file mode 100644
index 000000000000..200ae3a5cbbb
--- /dev/null
+++ b/src/arm/omap36xx-clocks.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Source for OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_clocks {
+	dpll4_ck: dpll4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-j-type-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-rate-parent;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,hsdiv-gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	uart4_fck: uart4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <18>;
+	};
+};
+
+&dpll4_m2x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m3x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&dpll4_m4x2_mul_ck {
+	ti,clock-mult = <1>;
+};
+
+&dpll4_m5x2_mul_ck {
+	ti,clock-mult = <1>;
+};
+
+&dpll4_m6x2_mul_ck {
+	clock-mult = <1>;
+};
+
+&cm_clockdomains {
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>, <&uart4_fck>;
+	};
+};
diff --git a/src/arm/omap36xx-hs.dtsi b/src/arm/omap36xx-hs.dtsi
new file mode 100644
index 000000000000..2c7febb0e016
--- /dev/null
+++ b/src/arm/omap36xx-hs.dtsi
@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap36xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+	status = "disabled";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&timer12 {
+	status = "disabled";
+};
diff --git a/src/arm/omap36xx-omap3430es2plus-clocks.dtsi b/src/arm/omap36xx-omap3430es2plus-clocks.dtsi
new file mode 100644
index 000000000000..877318c28364
--- /dev/null
+++ b/src/arm/omap36xx-omap3430es2plus-clocks.dtsi
@@ -0,0 +1,198 @@
+/*
+ * Device Tree Source for OMAP34xx/OMAP36xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_clocks {
+	ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <0>;
+		reg = <0x0a00>;
+	};
+
+	ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&corex2_fck>;
+		ti,bit-shift = <8>;
+		reg = <0x0a40>;
+		ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+	};
+
+	ssi_ssr_fck: ssi_ssr_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&ssi_ssr_gate_fck_3430es2>, <&ssi_ssr_div_fck_3430es2>;
+	};
+
+	ssi_sst_fck: ssi_sst_fck_3430es2 {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&ssi_ssr_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	hsotgusb_ick_3430es2: hsotgusb_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-hsotgusb-interface-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <4>;
+	};
+
+	ssi_l4_ick: ssi_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ssi_ick: ssi_ick_3430es2 {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-ssi-interface-clock";
+		clocks = <&ssi_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <0>;
+	};
+
+	usim_gate_fck: usim_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&omap_96m_fck>;
+		ti,bit-shift = <9>;
+		reg = <0x0c00>;
+	};
+
+	sys_d2_ck: sys_d2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d2_fck: omap_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_96m_d4_fck: omap_96m_d4_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	omap_96m_d8_fck: omap_96m_d8_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	omap_96m_d10_fck: omap_96m_d10_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll5_m2_d4_ck: dpll5_m2_d4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll5_m2_d8_ck: dpll5_m2_d8_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	dpll5_m2_d16_ck: dpll5_m2_d16_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll5_m2_d20_ck: dpll5_m2_d20_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll5_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <20>;
+	};
+
+	usim_mux_fck: usim_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	usim_fck: usim_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&usim_gate_fck>, <&usim_mux_fck>;
+	};
+
+	usim_ick: usim_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <9>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>, <&hsotgusb_ick_3430es2>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>, <&usim_ick>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
+			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
+			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
+			 <&ssi_ick>;
+	};
+};
diff --git a/src/arm/omap36xx.dtsi b/src/arm/omap36xx.dtsi
new file mode 100644
index 000000000000..541704a59a5a
--- /dev/null
+++ b/src/arm/omap36xx.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Device Tree Source for OMAP3 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	cpus {
+		/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
+		cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				300000  1012500
+				600000  1200000
+				800000  1325000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+
+	ocp {
+		uart4: serial@49042000 {
+			compatible = "ti,omap3-uart";
+			reg = <0x49042000 0x400>;
+			interrupts = <80>;
+			dmas = <&sdma 81 &sdma 82>;
+			dma-names = "tx", "rx";
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+
+		abb_mpu_iva: regulator-abb-mpu {
+			compatible = "ti,abb-v1";
+			regulator-name = "abb_mpu_iva";
+			#address-cell = <0>;
+			#size-cells = <0>;
+			reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+			reg-names = "base-address", "int-address";
+			ti,tranxdone-status-mask = <0x4000000>;
+			clocks = <&sys_ck>;
+			ti,settling-time = <30>;
+			ti,clock-cycles = <8>;
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1012500		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1325000		0	0	0	0	0
+			1375000		1	0	0	0	0
+			>;
+		};
+
+		omap3_pmx_core2: pinmux@480025a0 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x480025a0 0x5c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
+	};
+};
+
+/* OMAP3630 needs dss_96m_fck for VENC */
+&venc {
+	clocks = <&dss_tv_fck>, <&dss_96m_fck>;
+	clock-names = "fck", "tv_dac_clk";
+};
+
+&ssi {
+	status = "ok";
+
+	clocks = <&ssi_ssr_fck>,
+		 <&ssi_sst_fck>,
+		 <&ssi_ick>;
+	clock-names = "ssi_ssr_fck",
+		      "ssi_sst_fck",
+		      "ssi_ick";
+};
+
+/include/ "omap34xx-omap36xx-clocks.dtsi"
+/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+/include/ "omap36xx-clocks.dtsi"
diff --git a/src/arm/omap3xxx-clocks.dtsi b/src/arm/omap3xxx-clocks.dtsi
new file mode 100644
index 000000000000..5c375003bad1
--- /dev/null
+++ b/src/arm/omap3xxx-clocks.dtsi
@@ -0,0 +1,1664 @@
+/*
+ * Device Tree Source for OMAP3 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm_clocks {
+	virt_16_8m_ck: virt_16_8m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	osc_sys_ck: osc_sys_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>;
+		reg = <0x0d40>;
+	};
+
+	sys_ck: sys_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&osc_sys_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1270>;
+		ti,index-starts-at-one;
+	};
+
+	sys_clkout1: sys_clkout1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&osc_sys_ck>;
+		reg = <0x0d70>;
+		ti,bit-shift = <7>;
+	};
+
+	dpll3_x2_ck: dpll3_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m2x2_ck: dpll3_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_x2_ck: dpll4_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	corex2_fck: corex2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkup_l4_ick: wkup_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+&scrm_clocks {
+	mcbsp5_mux_fck: mcbsp5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <4>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp5_fck: mcbsp5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
+	};
+
+	mcbsp1_mux_fck: mcbsp1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x0274>;
+	};
+
+	mcbsp1_fck: mcbsp1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
+	};
+
+	mcbsp2_mux_fck: mcbsp2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <6>;
+		reg = <0x0274>;
+	};
+
+	mcbsp2_fck: mcbsp2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
+	};
+
+	mcbsp3_mux_fck: mcbsp3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp3_fck: mcbsp3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
+	};
+
+	mcbsp4_mux_fck: mcbsp4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&per_96m_fck>, <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x02d8>;
+	};
+
+	mcbsp4_fck: mcbsp4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>;
+	};
+};
+&cm_clocks {
+	dummy_apb_pclk: dummy_apb_pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	omap_32k_fck: omap_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12m_ck: virt_12m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13m_ck: virt_13m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_38_4m_ck: virt_38_4m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	dpll4_ck: dpll4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-per-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d44>, <0x0d30>;
+	};
+
+	dpll4_m2_ck: dpll4_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0d48>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m2x2_ck: dpll4_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m2x2_mul_ck>;
+		ti,bit-shift = <0x1b>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_96m_alwon_fck: omap_96m_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll3_ck: dpll3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-core-clock";
+		clocks = <&sys_ck>, <&sys_ck>;
+		reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
+	};
+
+	dpll3_m3_ck: dpll3_m3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <31>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll3_m3x2_ck: dpll3_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll3_m3x2_mul_ck>;
+		ti,bit-shift = <0xc>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_core_alwon_ck: emu_core_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sys_altclk: sys_altclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	mcbsp_clks: mcbsp_clks {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0x0>;
+	};
+
+	dpll3_m2_ck: dpll3_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll3_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <31>;
+		reg = <0x0d40>;
+		ti,index-starts-at-one;
+	};
+
+	core_ck: core_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll3_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll1_fck: dpll1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <19>;
+		ti,max-div = <7>;
+		reg = <0x0940>;
+		ti,index-starts-at-one;
+	};
+
+	dpll1_ck: dpll1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-dpll-clock";
+		clocks = <&sys_ck>, <&dpll1_fck>;
+		reg = <0x0904>, <0x0924>, <0x0940>, <0x0934>;
+	};
+
+	dpll1_x2_ck: dpll1_x2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll1_x2m2_ck: dpll1_x2m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll1_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0944>;
+		ti,index-starts-at-one;
+	};
+
+	cm_96m_fck: cm_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	omap_96m_fck: omap_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0d40>;
+	};
+
+	dpll4_m3_ck: dpll4_m3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <32>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m3_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m3x2_ck: dpll4_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m3x2_mul_ck>;
+		ti,bit-shift = <0x1c>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	omap_54m_fck: omap_54m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
+		ti,bit-shift = <5>;
+		reg = <0x0d40>;
+	};
+
+	cm_96m_d2_fck: cm_96m_d2_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cm_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	omap_48m_fck: omap_48m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
+		ti,bit-shift = <3>;
+		reg = <0x0d40>;
+	};
+
+	omap_12m_fck: omap_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll4_m4_ck: dpll4_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <32>;
+		reg = <0x0e40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll4_m4_ck>;
+		ti,clock-mult = <2>;
+		ti,clock-div = <1>;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m4x2_ck: dpll4_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m4x2_mul_ck>;
+		ti,bit-shift = <0x1d>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m5_ck: dpll4_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,max-div = <63>;
+		reg = <0x0f40>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll4_m5_ck>;
+		ti,clock-mult = <2>;
+		ti,clock-div = <1>;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m5x2_ck: dpll4_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m5x2_mul_ck>;
+		ti,bit-shift = <0x1e>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+		ti,set-rate-parent;
+	};
+
+	dpll4_m6_ck: dpll4_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll4_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <63>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6_ck>;
+		clock-mult = <2>;
+		clock-div = <1>;
+	};
+
+	dpll4_m6x2_ck: dpll4_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll4_m6x2_mul_ck>;
+		ti,bit-shift = <0x1f>;
+		reg = <0x0d00>;
+		ti,set-bit-to-disable;
+	};
+
+	emu_per_alwon_ck: emu_per_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll4_m6x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	clkout2_src_gate_ck: clkout2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&core_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_mux_ck: clkout2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
+		reg = <0x0d70>;
+	};
+
+	clkout2_src_ck: clkout2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
+	};
+
+	sys_clkout2: sys_clkout2 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&clkout2_src_ck>;
+		ti,bit-shift = <3>;
+		ti,max-div = <64>;
+		reg = <0x0d70>;
+		ti,index-power-of-two;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll1_x2m2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	arm_fck: arm_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mpu_ck>;
+		reg = <0x0924>;
+		ti,max-div = <2>;
+	};
+
+	emu_mpu_alwon_ck: emu_mpu_alwon_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3_ick: l3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&core_ck>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	l4_ick: l4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_ick>;
+		ti,bit-shift = <2>;
+		ti,max-div = <3>;
+		reg = <0x0a40>;
+		ti,index-starts-at-one;
+	};
+
+	rm_ick: rm_ick {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_ick>;
+		ti,bit-shift = <1>;
+		ti,max-div = <3>;
+		reg = <0x0c40>;
+		ti,index-starts-at-one;
+	};
+
+	gpt10_gate_fck: gpt10_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x0a00>;
+	};
+
+	gpt10_mux_fck: gpt10_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x0a40>;
+	};
+
+	gpt10_fck: gpt10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
+	};
+
+	gpt11_gate_fck: gpt11_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <12>;
+		reg = <0x0a00>;
+	};
+
+	gpt11_mux_fck: gpt11_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x0a40>;
+	};
+
+	gpt11_fck: gpt11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>;
+	};
+
+	core_96m_fck: core_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_fck: mmchs2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_fck: mmchs1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <24>;
+	};
+
+	i2c3_fck: i2c3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_fck: i2c2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_fck: i2c1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_96m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <15>;
+	};
+
+	mcbsp5_gate_fck: mcbsp5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <10>;
+		reg = <0x0a00>;
+	};
+
+	mcbsp1_gate_fck: mcbsp1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <9>;
+		reg = <0x0a00>;
+	};
+
+	core_48m_fck: core_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcspi4_fck: mcspi4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_fck: mcspi3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_fck: mcspi2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_fck: mcspi1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <18>;
+	};
+
+	uart2_fck: uart2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_fck: uart1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_48m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <13>;
+	};
+
+	core_12m_fck: core_12m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_12m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	hdq_fck: hdq_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_12m_fck>;
+		reg = <0x0a00>;
+		ti,bit-shift = <22>;
+	};
+
+	core_l3_ick: core_l3_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sdrc_ick: sdrc_ick {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&core_l3_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpmc_fck: gpmc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&core_l3_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	core_l4_ick: core_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mmchs2_ick: mmchs2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <25>;
+	};
+
+	mmchs1_ick: mmchs1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <24>;
+	};
+
+	hdq_ick: hdq_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <22>;
+	};
+
+	mcspi4_ick: mcspi4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <21>;
+	};
+
+	mcspi3_ick: mcspi3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <20>;
+	};
+
+	mcspi2_ick: mcspi2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <19>;
+	};
+
+	mcspi1_ick: mcspi1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <18>;
+	};
+
+	i2c3_ick: i2c3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <17>;
+	};
+
+	i2c2_ick: i2c2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <16>;
+	};
+
+	i2c1_ick: i2c1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <15>;
+	};
+
+	uart2_ick: uart2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <14>;
+	};
+
+	uart1_ick: uart1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <13>;
+	};
+
+	gpt11_ick: gpt11_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <12>;
+	};
+
+	gpt10_ick: gpt10_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <11>;
+	};
+
+	mcbsp5_ick: mcbsp5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <10>;
+	};
+
+	mcbsp1_ick: mcbsp1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <9>;
+	};
+
+	omapctrl_ick: omapctrl_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <6>;
+	};
+
+	dss_tv_fck: dss_tv_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_54m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss_96m_fck: dss_96m_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&omap_96m_fck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <2>;
+	};
+
+	dss2_alwon_fck: dss2_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_ck>;
+		reg = <0x0e00>;
+		ti,bit-shift = <1>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	gpt1_gate_fck: gpt1_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0c00>;
+	};
+
+	gpt1_mux_fck: gpt1_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x0c40>;
+	};
+
+	gpt1_fck: gpt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
+	};
+
+	aes2_ick: aes2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		ti,bit-shift = <28>;
+		reg = <0x0a10>;
+	};
+
+	wkup_32k_fck: wkup_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio1_dbck: gpio1_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <3>;
+	};
+
+	sha12_ick: sha12_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&core_l4_ick>;
+		reg = <0x0a10>;
+		ti,bit-shift = <27>;
+	};
+
+	wdt2_fck: wdt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&wkup_32k_fck>;
+		reg = <0x0c00>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt2_ick: wdt2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <5>;
+	};
+
+	wdt1_ick: wdt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <4>;
+	};
+
+	gpio1_ick: gpio1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <3>;
+	};
+
+	omap_32ksync_ick: omap_32ksync_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <2>;
+	};
+
+	gpt12_ick: gpt12_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <1>;
+	};
+
+	gpt1_ick: gpt1_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&wkup_l4_ick>;
+		reg = <0x0c10>;
+		ti,bit-shift = <0>;
+	};
+
+	per_96m_fck: per_96m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_96m_alwon_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	per_48m_fck: per_48m_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_48m_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	uart3_fck: uart3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_48m_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <11>;
+	};
+
+	gpt2_gate_fck: gpt2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1000>;
+	};
+
+	gpt2_mux_fck: gpt2_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		reg = <0x1040>;
+	};
+
+	gpt2_fck: gpt2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
+	};
+
+	gpt3_gate_fck: gpt3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1000>;
+	};
+
+	gpt3_mux_fck: gpt3_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x1040>;
+	};
+
+	gpt3_fck: gpt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
+	};
+
+	gpt4_gate_fck: gpt4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1000>;
+	};
+
+	gpt4_mux_fck: gpt4_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1040>;
+	};
+
+	gpt4_fck: gpt4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
+	};
+
+	gpt5_gate_fck: gpt5_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1000>;
+	};
+
+	gpt5_mux_fck: gpt5_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x1040>;
+	};
+
+	gpt5_fck: gpt5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
+	};
+
+	gpt6_gate_fck: gpt6_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1000>;
+	};
+
+	gpt6_mux_fck: gpt6_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <4>;
+		reg = <0x1040>;
+	};
+
+	gpt6_fck: gpt6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
+	};
+
+	gpt7_gate_fck: gpt7_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1000>;
+	};
+
+	gpt7_mux_fck: gpt7_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <5>;
+		reg = <0x1040>;
+	};
+
+	gpt7_fck: gpt7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
+	};
+
+	gpt8_gate_fck: gpt8_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x1000>;
+	};
+
+	gpt8_mux_fck: gpt8_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x1040>;
+	};
+
+	gpt8_fck: gpt8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
+	};
+
+	gpt9_gate_fck: gpt9_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&sys_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1000>;
+	};
+
+	gpt9_mux_fck: gpt9_mux_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&omap_32k_fck>, <&sys_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1040>;
+	};
+
+	gpt9_fck: gpt9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>;
+	};
+
+	per_32k_alwon_fck: per_32k_alwon_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&omap_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_dbck: gpio6_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_dbck: gpio5_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_dbck: gpio4_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_dbck: gpio3_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_dbck: gpio2_dbck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_fck: wdt3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,wait-gate-clock";
+		clocks = <&per_32k_alwon_fck>;
+		reg = <0x1000>;
+		ti,bit-shift = <12>;
+	};
+
+	per_l4_ick: per_l4_ick {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l4_ick>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio6_ick: gpio6_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <17>;
+	};
+
+	gpio5_ick: gpio5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <16>;
+	};
+
+	gpio4_ick: gpio4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <15>;
+	};
+
+	gpio3_ick: gpio3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <14>;
+	};
+
+	gpio2_ick: gpio2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <13>;
+	};
+
+	wdt3_ick: wdt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <12>;
+	};
+
+	uart3_ick: uart3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <11>;
+	};
+
+	uart4_ick: uart4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <18>;
+	};
+
+	gpt9_ick: gpt9_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <10>;
+	};
+
+	gpt8_ick: gpt8_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <9>;
+	};
+
+	gpt7_ick: gpt7_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <8>;
+	};
+
+	gpt6_ick: gpt6_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <7>;
+	};
+
+	gpt5_ick: gpt5_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <6>;
+	};
+
+	gpt4_ick: gpt4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <5>;
+	};
+
+	gpt3_ick: gpt3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <4>;
+	};
+
+	gpt2_ick: gpt2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <3>;
+	};
+
+	mcbsp2_ick: mcbsp2_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <0>;
+	};
+
+	mcbsp3_ick: mcbsp3_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <1>;
+	};
+
+	mcbsp4_ick: mcbsp4_ick {
+		#clock-cells = <0>;
+		compatible = "ti,omap3-interface-clock";
+		clocks = <&per_l4_ick>;
+		reg = <0x1010>;
+		ti,bit-shift = <2>;
+	};
+
+	mcbsp2_gate_fck: mcbsp2_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <0>;
+		reg = <0x1000>;
+	};
+
+	mcbsp3_gate_fck: mcbsp3_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <1>;
+		reg = <0x1000>;
+	};
+
+	mcbsp4_gate_fck: mcbsp4_gate_fck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-gate-clock";
+		clocks = <&mcbsp_clks>;
+		ti,bit-shift = <2>;
+		reg = <0x1000>;
+	};
+
+	emu_src_mux_ck: emu_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		reg = <0x1140>;
+	};
+
+	emu_src_ck: emu_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&emu_src_mux_ck>;
+	};
+
+	pclk_fck: pclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	pclkx2_fck: pclkx2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <6>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	atclk_fck: atclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&emu_src_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <3>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	traceclk_src_fck: traceclk_src_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x1140>;
+	};
+
+	traceclk_fck: traceclk_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&traceclk_src_fck>;
+		ti,bit-shift = <11>;
+		ti,max-div = <7>;
+		reg = <0x1140>;
+		ti,index-starts-at-one;
+	};
+
+	secure_32k_fck: secure_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpt12_fck: gpt12_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&secure_32k_fck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>;
+	};
+
+	dpll3_clkdm: dpll3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll3_ck>;
+	};
+
+	dpll1_clkdm: dpll1_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll1_ck>;
+	};
+
+	per_clkdm: per_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&uart3_fck>, <&gpio6_dbck>, <&gpio5_dbck>,
+			 <&gpio4_dbck>, <&gpio3_dbck>, <&gpio2_dbck>,
+			 <&wdt3_fck>, <&gpio6_ick>, <&gpio5_ick>, <&gpio4_ick>,
+			 <&gpio3_ick>, <&gpio2_ick>, <&wdt3_ick>, <&uart3_ick>,
+			 <&uart4_ick>, <&gpt9_ick>, <&gpt8_ick>, <&gpt7_ick>,
+			 <&gpt6_ick>, <&gpt5_ick>, <&gpt4_ick>, <&gpt3_ick>,
+			 <&gpt2_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>,
+			 <&mcbsp4_ick>;
+	};
+
+	emu_clkdm: emu_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&emu_src_ck>;
+	};
+
+	dpll4_clkdm: dpll4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll4_ck>;
+	};
+
+	wkup_clkdm: wkup_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&gpio1_dbck>, <&wdt2_fck>, <&wdt2_ick>, <&wdt1_ick>,
+			 <&gpio1_ick>, <&omap_32ksync_ick>, <&gpt12_ick>,
+			 <&gpt1_ick>;
+	};
+
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss_tv_fck>, <&dss_96m_fck>, <&dss2_alwon_fck>;
+	};
+
+	core_l4_clkdm: core_l4_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
+			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
+			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
+			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
+			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
+			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
+			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
+			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
+			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>;
+	};
+};
diff --git a/src/arm/omap4-cpu-thermal.dtsi b/src/arm/omap4-cpu-thermal.dtsi
new file mode 100644
index 000000000000..cb9458feb2e3
--- /dev/null
+++ b/src/arm/omap4-cpu-thermal.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Device Tree Source for OMAP4/5 SoC CPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor       ID */
+        thermal-sensors = <&bandgap     0>;
+
+        trips {
+                cpu_alert0: cpu_alert {
+                        temperature = <100000>; /* millicelsius */
+                        hysteresis = <2000>; /* millicelsius */
+                        type = "passive";
+                };
+                cpu_crit: cpu_crit {
+                        temperature = <125000>; /* millicelsius */
+                        hysteresis = <2000>; /* millicelsius */
+                        type = "critical";
+                };
+        };
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/src/arm/omap4-duovero-parlor.dts b/src/arm/omap4-duovero-parlor.dts
new file mode 100644
index 000000000000..1a78f013f37a
--- /dev/null
+++ b/src/arm/omap4-duovero-parlor.dts
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap4-duovero.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "OMAP4430 Gumstix Duovero on Parlor";
+	compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "duovero:blue:led0";
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;	/* gpio_122 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0@121 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
+			gpio-key,wakeup;
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "d";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio_63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-0 = <
+			&led_pins
+			&button_pins
+			&smsc_pins
+	>;
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
+		>;
+	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* abe_dmic_din2.gpio_121 */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	smsc_pins: pinmux_smsc_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3)		/* gpmc_a20.gpio_44: IRQ */
+			OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a21.gpio_45: nReset */
+			OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48: amdix enabled */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <100000>;
+
+	/* optional 1K EEPROM with revision information */
+	eeprom@51 {
+		compatible = "atmel,24c01";
+		reg = <0x51>;
+		pagesize = <8>;
+	};
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x1000000>;			/* CS5 */
+
+	ethernet@gpmc {
+		reg = <5 0 0xff>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;		/* gpio_44 */
+
+		phy-mode = "mii";
+
+		gpmc,cs-on-ns = <10>;
+		gpmc,cs-rd-off-ns = <50>;
+		gpmc,cs-wr-off-ns = <50>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <50>;
+		gpmc,we-on-ns = <15>;
+		gpmc,we-off-ns = <50>;
+		gpmc,rd-cycle-ns = <50>;
+		gpmc,wr-cycle-ns = <50>;
+		gpmc,access-ns = <50>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <35>;
+		gpmc,cycle2cycle-delay-ns = <35>;
+		gpmc,wr-data-mux-bus-ns = <35>;
+		gpmc,wr-access-ns = <50>;
+
+		gpmc,mux-add-data = <2>;
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,sync-clk-ps = <20000>;
+	};
+};
+
+&dss {
+	status = "ok";
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+		};
+	};
+};
+
diff --git a/src/arm/omap4-duovero.dtsi b/src/arm/omap4-duovero.dtsi
new file mode 100644
index 000000000000..e860ccd9d09c
--- /dev/null
+++ b/src/arm/omap4-duovero.dtsi
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap443x.dtsi"
+
+/ {
+	model = "Gumstix Duovero";
+	compatible = "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "DuoVero";
+
+		ti,mclk-freq = <38400000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias";
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;	/* gpio_62 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1phy_pins>;
+
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	/* regulator for w2cbw0015 on sdio5 */
+	w2cbw0015_vmmc: w2cbw0015_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&w2cbw0015_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "w2cbw0015";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;		/* gpio_43 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6040_pins
+			&hsusbb1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_nxt.gpio_160 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	hsusb1phy_pins: pinmux_hsusb1phy_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3)		/* gpmc_wait1.gpio_62 */
+		>;
+	};
+
+	w2cbw0015_pins: pinmux_w2cbw0015_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk */
+			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_cmd */
+			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc1_dat0 */
+			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1 */
+			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2 */
+			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc5_pins: pinmux_mmc5_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmcc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3 */
+		>;
+	};
+};
+
+/* PMIC */
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		reg = <0x4b>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;		/* IRQ_SYS_2N cascaded to gic */
+		interrupt-parent = <&gic>;
+		ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>;		/* gpio_160 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+/* on-board bluetooth / WiFi module */
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	vmmc-supply = <&vmmc>;
+	ti,bus-width = <4>;
+	ti,non-removable;		/* FIXME: use PMIC_MMC detect */
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+/* mmc3 is available to the expansion board */
+
+&mmc4 {
+	status = "disabled";
+};
+
+/* on-board WiFi module */
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc5_pins>;
+
+	vmmc-supply = <&w2cbw0015_vmmc>;
+	ti,bus-width = <4>;
+	ti,non-removable;
+	cap-power-off-card;
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
diff --git a/src/arm/omap4-panda-a4.dts b/src/arm/omap4-panda-a4.dts
new file mode 100644
index 000000000000..133f1b74e8ae
--- /dev/null
+++ b/src/arm/omap4-panda-a4.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		>;
+};
diff --git a/src/arm/omap4-panda-common.dtsi b/src/arm/omap4-panda-common.dtsi
new file mode 100644
index 000000000000..150513506c19
--- /dev/null
+++ b/src/arm/omap4-panda-common.dtsi
@@ -0,0 +1,535 @@
+/*
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "elpida_ecb240abacn.dtsi"
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	aliases {
+		display0 = &dvi0;
+		display1 = &hdmi0;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&led_wkgpio_pins
+		>;
+
+		heartbeat {
+			label = "pandaboard::status1";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "pandaboard::status2";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	sound: sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "PandaBoard";
+
+		ti,mclk-freq = <38400000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Ext Spk", "HFL",
+			"Ext Spk", "HFR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+
+	/* HS USB Port 1 Power */
+	hsusb1_power: hsusb1_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 1 0>;	/* gpio_1 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		/*
+		 * boot-on is required along with always-on as the
+		 * regulator framework doesn't enable the regulator
+		 * if boot-on is not there.
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
+		vcc-supply = <&hsusb1_power>;
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 11 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+		powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* gpio_0 */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@0 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c3>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@1 {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@1 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&dss_dpi_pins
+			&tfp410_pins
+			&dss_hdmi_pins
+			&tpd12s015_pins
+			&hsusbb1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			0xe0 (PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
+			0x160 (PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			0xca (PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			0x122 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data23 */
+			0x124 (PIN_OUTPUT | MUX_MODE5) 	/* dispc2_data22 */
+			0x126 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data21 */
+			0x128 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data20 */
+			0x12a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data19 */
+			0x12c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data18 */
+			0x12e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data15 */
+			0x130 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data14 */
+			0x132 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data13 */
+			0x134 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data12 */
+			0x136 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data11 */
+
+			0x174 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data10 */
+			0x176 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data9 */
+			0x178 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data16 */
+			0x17a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data17 */
+			0x17c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_hsync */
+			0x17e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_pclk */
+			0x180 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_vsync */
+			0x182 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_de */
+			0x184 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data8 */
+			0x186 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data7 */
+			0x188 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data6 */
+			0x18a (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data5 */
+			0x18c (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data4 */
+			0x18e (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data3 */
+
+			0x190 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data2 */
+			0x192 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data1 */
+			0x194 (PIN_OUTPUT | MUX_MODE5)	/* dispc2_data0 */
+		>;
+	};
+
+	tfp410_pins: pinmux_tfp410_pins {
+		pinctrl-single,pins = <
+			0x144 (PIN_OUTPUT | MUX_MODE3)	/* gpio_0 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			0x84 (PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	/*
+	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+	 */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x26 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			0x2c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+			0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
+			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	led_wkgpio_pins: pinmux_leds_wkpins {
+		pinctrl-single,pins = <
+			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
+			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* IRQ# = 7 */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* IRQ# = 119 */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+		interrupt-parent = <&gic>;
+		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <100000>;
+
+	/*
+	 * Display monitor features are burnt in their EEPROM as EDID data.
+	 * The EEPROM is connected as I2C slave device.
+	 */
+	eeprom@50 {
+		compatible = "ti,eeprom";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&uart2 {
+	interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART2_RX>;
+};
+
+&uart3 {
+	interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&uart4 {
+	interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART4_RX>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
+&dss {
+	status = "ok";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dsi2 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/src/arm/omap4-panda-es.dts b/src/arm/omap4-panda-es.dts
new file mode 100644
index 000000000000..2f1dabcc6adf
--- /dev/null
+++ b/src/arm/omap4-panda-es.dts
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap4460.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/ {
+	model = "TI OMAP4 PandaBoard-ES";
+	compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4";
+};
+
+/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
+&sound {
+	ti,model = "PandaBoardES";
+
+	/* Audio routing */
+	ti,audio-routing =
+		"Headset Stereophone", "HSOL",
+		"Headset Stereophone", "HSOR",
+		"Ext Spk", "HFL",
+		"Ext Spk", "HFR",
+		"Line Out", "AUXL",
+		"Line Out", "AUXR",
+		"AFML", "Line In",
+		"AFMR", "Line In";
+};
+
+/* PandaboardES has external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		>;
+};
+
+&omap4_pmx_core {
+	led_gpio_pins: gpio_led_pmx {
+		pinctrl-single,pins = <
+			0xb6 (PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
+		>;
+	};
+};
+
+&led_wkgpio_pins {
+	pinctrl-single,pins = <
+		0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+	>;
+};
+
+&leds {
+	pinctrl-0 = <
+		&led_gpio_pins
+		&led_wkgpio_pins
+	>;
+
+	heartbeat {
+		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+	};
+	mmc {
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio1 {
+	 ti,no-reset-on-init;
+};
diff --git a/src/arm/omap4-panda.dts b/src/arm/omap4-panda.dts
new file mode 100644
index 000000000000..a0e28b2e254e
--- /dev/null
+++ b/src/arm/omap4-panda.dts
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "omap4-panda-common.dtsi"
+
+/ {
+	model = "TI OMAP4 PandaBoard";
+	compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
+};
diff --git a/src/arm/omap4-sdp-es23plus.dts b/src/arm/omap4-sdp-es23plus.dts
new file mode 100644
index 000000000000..aad5dda0f469
--- /dev/null
+++ b/src/arm/omap4-sdp-es23plus.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "omap4-sdp.dts"
+
+/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
+		>;
+};
diff --git a/src/arm/omap4-sdp.dts b/src/arm/omap4-sdp.dts
new file mode 100644
index 000000000000..3e1da43068f6
--- /dev/null
+++ b/src/arm/omap4-sdp.dts
@@ -0,0 +1,690 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap443x.dtsi"
+#include "elpida_ecb240abacn.dtsi"
+
+/ {
+	model = "TI OMAP4 SDP board";
+	compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &lcd1;
+		display2 = &hdmi0;
+	};
+
+	vdd_eth: fixedregulator-vdd-eth {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_ETH";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 16 0>;  /* gpio line 48 */
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	vbat: fixedregulator-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+		regulator-min-microvolt = <3750000>;
+		regulator-max-microvolt = <3750000>;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		debug0 {
+			label = "omap4:green:debug0";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
+		};
+
+		debug1 {
+			label = "omap4:green:debug1";
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
+		};
+
+		debug2 {
+			label = "omap4:green:debug2";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
+		};
+
+		debug3 {
+			label = "omap4:green:debug3";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
+		};
+
+		debug4 {
+			label = "omap4:green:debug4";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
+		};
+
+		user1 {
+			label = "omap4:blue:user";
+			gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
+		};
+
+		user2 {
+			label = "omap4:red:user";
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
+		};
+
+		user3 {
+			label = "omap4:green:user";
+			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+		kpad {
+			label = "omap4::keypad";
+			pwms = <&twl_pwm 0 7812500>;
+			max-brightness = <127>;
+		};
+
+		charging {
+			label = "omap4:green:chrg";
+			pwms = <&twl_pwmled 0 7812500>;
+			max-brightness = <255>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&twl_pwm 1 7812500>;
+		brightness-levels = <
+				0 10 20 30 40
+				50 60 70 80 90
+				100 110 120 127
+				>;
+		default-brightness-level = <13>;
+	};
+
+	sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "SDP4430";
+
+		ti,jack-detection = <1>;
+		ti,mclk-freq = <38400000>;
+
+		ti,mcpdm = <&mcpdm>;
+		ti,dmic = <&dmic>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Earphone Spk", "EP",
+			"Ext Spk", "HFL",
+			"Ext Spk", "HFR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"Vibrator", "VIBRAL",
+			"Vibrator", "VIBRAR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"MAINMIC", "Main Handset Mic",
+			"Main Handset Mic", "Main Mic Bias",
+			"SUBMIC", "Sub Handset Mic",
+			"Sub Handset Mic", "Main Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In",
+			"DMic", "Digital Mic",
+			"Digital Mic", "Digital Mic1 Bias";
+	};
+
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 22 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
+			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
+			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "c";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&dss_hdmi_pins
+			&tpd12s015_pins
+	>;
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0xd8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			0xda (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			0xdc (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			0xde (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			0x102 (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			0x104 (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			0x106 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			0x11c (PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
+			0x11e (PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
+		>;
+	};
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
+			0x160 (PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			0xca (PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+		>;
+	};
+
+	dmic_pins: pinmux_dmic_pins {
+		pinctrl-single,pins = <
+			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
+			0xd2 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
+			0xd4 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
+			0xd6 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			0xb6 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+			0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
+			0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
+			0xbc (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			0xf2 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
+			0xf4 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
+			0xf6 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
+			0xf8 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+		interrupt-parent = <&gic>;
+		ti,audpwron-gpio = <&gpio4 31 0>;  /* gpio line 127 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+
+		/* regulators for vibra motor */
+		vddvibl-supply = <&vbat>;
+		vddvibr-supply = <&vbat>;
+
+		vibra {
+			/* Vibra driver, motor resistance parameters */
+			ti,vibldrv-res = <8>;
+			ti,vibrdrv-res = <3>;
+			ti,viblmotor-res = <10>;
+			ti,vibrmotor-res = <10>;
+		};
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+
+	clock-frequency = <400000>;
+
+	/*
+	 * Temperature Sensor
+	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+	 */
+	tmp105@48 {
+		compatible = "ti,tmp105";
+		reg = <0x48>;
+	};
+
+	/*
+	 * Ambient Light Sensor
+	 * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
+	 */
+	bh1780@29 {
+		compatible = "rohm,bh1780";
+		reg = <0x29>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+
+	/*
+	 * 3-Axis Digital Compass
+	 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+	 */
+	hmc5843@1e {
+		compatible = "honeywell,hmc5843";
+		reg = <0x1e>;
+	};
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
+	eth@0 {
+		compatible = "ks8851";
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
+		vdd-supply = <&vdd_eth>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vaux1>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&emif1 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&elpida_ECB240ABACN>;
+};
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <0x00000012	/* KEY_E */
+			0x00010013	/* KEY_R */
+			0x00020014	/* KEY_T */
+			0x00030066	/* KEY_HOME */
+			0x0004003f	/* KEY_F5 */
+			0x000500f0	/* KEY_UNKNOWN */
+			0x00060017	/* KEY_I */
+			0x0007002a	/* KEY_LEFTSHIFT */
+			0x01000020	/* KEY_D*/
+			0x01010021	/* KEY_F */
+			0x01020022	/* KEY_G */
+			0x010300e7	/* KEY_SEND */
+			0x01040040	/* KEY_F6 */
+			0x010500f0	/* KEY_UNKNOWN */
+			0x01060025	/* KEY_K */
+			0x0107001c	/* KEY_ENTER */
+			0x0200002d	/* KEY_X */
+			0x0201002e	/* KEY_C */
+			0x0202002f	/* KEY_V */
+			0x0203006b	/* KEY_END */
+			0x02040041	/* KEY_F7 */
+			0x020500f0	/* KEY_UNKNOWN */
+			0x02060034	/* KEY_DOT */
+			0x0207003a	/* KEY_CAPSLOCK */
+			0x0300002c	/* KEY_Z */
+			0x0301004e	/* KEY_KPLUS */
+			0x03020030	/* KEY_B */
+			0x0303003b	/* KEY_F1 */
+			0x03040042	/* KEY_F8 */
+			0x030500f0	/* KEY_UNKNOWN */
+			0x03060018	/* KEY_O */
+			0x03070039	/* KEY_SPACE */
+			0x04000011	/* KEY_W */
+			0x04010015	/* KEY_Y */
+			0x04020016	/* KEY_U */
+			0x0403003c	/* KEY_F2 */
+			0x04040073	/* KEY_VOLUMEUP */
+			0x040500f0	/* KEY_UNKNOWN */
+			0x04060026	/* KEY_L */
+			0x04070069	/* KEY_LEFT */
+			0x0500001f	/* KEY_S */
+			0x05010023	/* KEY_H */
+			0x05020024	/* KEY_J */
+			0x0503003d	/* KEY_F3 */
+			0x05040043	/* KEY_F9 */
+			0x05050072	/* KEY_VOLUMEDOWN */
+			0x05060032	/* KEY_M */
+			0x0507006a	/* KEY_RIGHT */
+			0x06000010	/* KEY_Q */
+			0x0601001e	/* KEY_A */
+			0x06020031	/* KEY_N */
+			0x0603009e	/* KEY_BACK */
+			0x0604000e	/* KEY_BACKSPACE */
+			0x060500f0	/* KEY_UNKNOWN */
+			0x06060019	/* KEY_P */
+			0x06070067	/* KEY_UP */
+			0x07000094	/* KEY_PROG1 */
+			0x07010095	/* KEY_PROG2 */
+			0x070200ca	/* KEY_PROG3 */
+			0x070300cb	/* KEY_PROG4 */
+			0x0704003e	/* KEY_F4 */
+			0x070500f0	/* KEY_UNKNOWN */
+			0x07060160	/* KEY_OK */
+			0x0707006c>;	/* KEY_DOWN */
+	linux,input-no-autorepeat;
+};
+
+&uart2 {
+	interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+	interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART3_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+	interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core OMAP4_UART4_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&dmic {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dmic_pins>;
+	status = "okay";
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&dss {
+	status = "ok";
+};
+
+&dsi1 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: display {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		label = "lcd0";
+
+		reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;	/* 102 */
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
+
+&dsi2 {
+	status = "ok";
+	vdd-supply = <&vcxio>;
+
+	port {
+		dsi2_out_ep: endpoint {
+			remote-endpoint = <&lcd1_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd1: display {
+		compatible = "tpo,taal", "panel-dsi-cm";
+		label = "lcd1";
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;	/* 104 */
+
+		port {
+			lcd1_in: endpoint {
+				remote-endpoint = <&dsi2_out_ep>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/src/arm/omap4-var-dvk-om44.dts b/src/arm/omap4-var-dvk-om44.dts
new file mode 100644
index 000000000000..458d79fa378b
--- /dev/null
+++ b/src/arm/omap4-var-dvk-om44.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap4-var-som-om44.dtsi"
+#include "omap4-var-som-om44-wlan.dtsi"
+#include "omap4-var-om44customboard.dtsi"
+
+/ {
+	model = "Variscite VAR-DVK-OM44";
+	compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
+
+	lcd0: display {
+		compatible = "innolux,at070tn83", "panel-dpi";
+		label = "lcd";
+		panel-timing {
+			clock-frequency = <33333333>;
+
+			hback-porch = <40>;
+			hactive = <800>;
+			hfront-porch = <40>;
+			hsync-len = <48>;
+
+			vback-porch = <29>;
+			vactive = <480>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+
+		gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dsi2 {
+	status = "okay";
+	vdd-supply = <&vcxio>;
+};
diff --git a/src/arm/omap4-var-om44customboard.dtsi b/src/arm/omap4-var-om44customboard.dtsi
new file mode 100644
index 000000000000..f2d2fdb75628
--- /dev/null
+++ b/src/arm/omap4-var-om44customboard.dtsi
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_led_pins>;
+
+		led0 {
+			label = "var:green:led0";
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "var:green:led1";
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-key@184 {
+			label = "user";
+			gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */
+			linux,code = <BTN_EXTRA>;
+			gpio-key,wakeup;
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_pins>;
+		label = "hdmi";
+		type = "a";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+};
+
+&omap4_pmx_core {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi1_cs2.uart1_cts */
+			OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1)		/* mcspi1_cs3.uart1_rts */
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1)	/* i2c2_scl.uart1_rx */
+			OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1)		/* i2c2_sda.uart1_tx */
+		>;
+	};
+
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
+			OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
+			OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
+			OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
+		>;
+	};
+
+	mcasp_pins: pinmux_mcsasp_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2)		/*  mcbsp2_dr.abe_mcasp_axr */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data23 */
+			OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data22 */
+			OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data21 */
+			OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data20 */
+			OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data19 */
+			OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data18 */
+			OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data15 */
+			OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data14 */
+			OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data13 */
+			OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data12 */
+			OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data11 */
+			OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data10 */
+			OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data9 */
+			OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data16 */
+			OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data17 */
+			OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_hsync */
+			OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)		/* dispc2_pclk */
+			OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_vsync */
+			OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_de */
+			OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data8 */
+			OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data7 */
+			OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data6 */
+			OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data5 */
+			OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data4 */
+			OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data3 */
+			OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data2 */
+			OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data1 */
+			OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)		/* dispc2_data0 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+
+	mmc5_pins: pinmux_mmc5_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3)		/* abe_mcbsp2_clkx.gpio_110 */
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+
+	gpio_led_pins: pinmux_gpio_led_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3)		/* kpd_col4.gpio_172 */
+			OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)		/* kpd_col5.gpio_173 */
+		>;
+	};
+
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3)		/* sys_boot0.gpio_184 */
+		>;
+	};
+
+	ks8851_irq_pins: pinmux_ks8851_irq_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3)	/* kpd_col3.gpio_171 */
+		>;
+	};
+
+	hdmi_hpd_pins: pinmux_hdmi_hpd_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3)		/* abe_dmic_din3.gpio_122 */
+		>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+	status = "okay";
+
+	eth@0 {
+		compatible = "ks8851";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ks8851_irq_pins>;
+		spi-max-frequency = <24000000>;
+		reg = <0>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */
+	};
+};
+
+&mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc5_pins>;
+	vmmc-supply = <&vbat>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */
+	status = "okay";
+};
+
+&dss {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+		};
+	};
+};
diff --git a/src/arm/omap4-var-som-om44-wlan.dtsi b/src/arm/omap4-var-som-om44-wlan.dtsi
new file mode 100644
index 000000000000..cc66af419236
--- /dev/null
+++ b/src/arm/omap4-var-som-om44-wlan.dtsi
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	/* regulator for wl12xx on sdio4 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_ctrl_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 11 0>;	/* gpio 43 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&omap4_pmx_core {
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a17.gpio_41 (WLAN_IRQ) */
+			OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a18.gpio_42 (BT_EN) */
+			OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 (WLAN_EN) */
+		>;
+	};
+
+	mmc4_pins: pinmux_mmc4_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_clk.sdmmc4_clk */
+			OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_simo.sdmmc4_cmd */
+			OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_somi.sdmmc4_dat0 */
+			OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_tx.sdmmc4_dat1 */
+			OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1)	/* uart4_rx.sdmmc4_dat2 */
+			OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1)	/* mcspi4_cs0.sdmmc4_dat3 */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&mmc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc4_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	status = "okay";
+};
diff --git a/src/arm/omap4-var-som-om44.dtsi b/src/arm/omap4-var-som-om44.dtsi
new file mode 100644
index 000000000000..062701e1a898
--- /dev/null
+++ b/src/arm/omap4-var-som-om44.dtsi
@@ -0,0 +1,343 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include "omap4460.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-OM44";
+	compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	sound: sound@0 {
+		compatible = "ti,abe-twl6040";
+		ti,model = "VAR-SOM-OM44";
+
+		ti,mclk-freq = <38400000>;
+		ti,mcpdm = <&mcpdm>;
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&hsusbb1_phy_clk_pins
+			&hsusbb1_phy_rst_pins
+		>;
+
+		reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
+		vcc-supply = <&vbat>;
+
+		clocks = <&auxclk3_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	vbat: fixedregulator-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "VBAT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&omap4_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusbb1_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3)		/* fref_clk2_out.gpio_182 */
+			OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3)		/* gpmc_ncs4.gpio_101 (irq) */
+			OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3)		/* gpmc_ncs5.gpio_102 (rst) */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3)		/* kpd_row2.gpio_177 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&hsusbb1_hub_rst_pins
+		&lan7500_rst_pins
+	>;
+
+	hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0)	/* fref_clk3_out */
+		>;
+	};
+
+	hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk1 */
+		>;
+	};
+
+	lan7500_rst_pins: pinmux_lan7500_rst_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3)	/* gpio_wk0 */
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
+		interrupt-parent = <&gic>;
+		ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
+
+		vio-supply = <&v1v8>;
+		v2v1-supply = <&v2v1>;
+		enable-active-high;
+	};
+};
+
+#include "twl6030.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&vusim {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	touchscreen: tsc2004@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */
+		status = "disabled";
+	};
+
+	tmp105@49 {
+		compatible = "ti,tmp105";
+		reg = <0x49>;
+	};
+
+	eeprom@50 {
+		compatible = "microchip,24c32";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	status = "disabled";
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&gpmc {
+	status = "disabled";
+};
+
+&mcspi1 {
+	status = "disabled";
+};
+
+&mcspi2 {
+	status = "disabled";
+};
+
+&mcspi3 {
+	status = "disabled";
+};
+
+&mcspi4 {
+	status = "disabled";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	ti,non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&keypad {
+	status = "disabled";
+};
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
diff --git a/src/arm/omap4-var-stk-om44.dts b/src/arm/omap4-var-stk-om44.dts
new file mode 100644
index 000000000000..56b64e618608
--- /dev/null
+++ b/src/arm/omap4-var-stk-om44.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap4-var-som-om44.dtsi"
+#include "omap4-var-som-om44-wlan.dtsi"
+#include "omap4-var-om44customboard.dtsi"
+
+/ {
+	model = "Variscite VAR-STK-OM44";
+	compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4";
+};
diff --git a/src/arm/omap4.dtsi b/src/arm/omap4.dtsi
new file mode 100644
index 000000000000..074147cebae4
--- /dev/null
+++ b/src/arm/omap4.dtsi
@@ -0,0 +1,957 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,omap4430", "ti,omap4";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+	};
+
+	L2: l2-cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	local-timer@48240600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		clocks = <&mpu_periphclk>;
+		reg = <0x48240600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap4-mpu";
+			ti,hwmods = "mpu";
+			sram = <&ocmcram>;
+		};
+
+		dsp {
+			compatible = "ti,omap3-c64";
+			ti,hwmods = "dsp";
+		};
+
+		iva {
+			compatible = "ti,ivahd";
+			ti,hwmods = "iva";
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP4 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+		reg = <0x44000000 0x1000>,
+		      <0x44800000 0x2000>,
+		      <0x45000000 0x1000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		cm1: cm1@4a004000 {
+			compatible = "ti,omap4-cm1";
+			reg = <0x4a004000 0x2000>;
+
+			cm1_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm1_clockdomains: clockdomains {
+			};
+		};
+
+		prm: prm@4a306000 {
+			compatible = "ti,omap4-prm";
+			reg = <0x4a306000 0x3000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+			prm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prm_clockdomains: clockdomains {
+			};
+		};
+
+		cm2: cm2@4a008000 {
+			compatible = "ti,omap4-cm2";
+			reg = <0x4a008000 0x3000>;
+
+			cm2_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm2_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@4a30a000 {
+			compatible = "ti,omap4-scrm";
+			reg = <0x4a30a000 0x2000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		counter32k: counter@4a304000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4a304000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
+		omap4_pmx_core: pinmux@4a100040 {
+			compatible = "ti,omap4-padconf", "pinctrl-single";
+			reg = <0x4a100040 0x0196>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+		omap4_pmx_wkup: pinmux@4a31e040 {
+			compatible = "ti,omap4-padconf", "pinctrl-single";
+			reg = <0x4a31e040 0x0038>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+
+		omap4_padconf_global: tisyscon@4a1005a0 {
+			compatible = "syscon";
+			reg = <0x4a1005a0 0x170>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x60 0x4>;
+			syscon = <&omap4_padconf_global>;
+			pbias_mmc_reg: pbias_mmc_omap4 {
+				regulator-name = "pbias_mmc_omap4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
+		ocmcram: ocmcram@40304000 {
+			compatible = "mmio-sram";
+			reg = <0x40304000 0xa000>; /* 40k */
+		};
+
+		sdma: dma-controller@4a056000 {
+			compatible = "ti,omap4430-sdma";
+			reg = <0x4a056000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <127>;
+		};
+
+		gpio1: gpio@4a310000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4a310000 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,omap4430-gpmc";
+			reg = <0x50000000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
+			clocks = <&l3_div_ck>;
+			clock-names = "fck";
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+		};
+
+		uart3: serial@48020000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+		};
+
+		uart4: serial@4806e000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+		};
+
+		i2c4: i2c@48350000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48350000 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c4";
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48098000 0x200>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x4809a000 0x200>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480b8000 0x200>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>, <&sdma 16>;
+			dma-names = "tx0", "rx0";
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480ba000 0x200>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+			dmas = <&sdma 57>, <&sdma 58>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc5: mmc@480d5000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d5000 0x400>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc5";
+			ti,needs-special-reset;
+			dmas = <&sdma 59>, <&sdma 60>;
+			dma-names = "tx", "rx";
+		};
+
+		mmu_dsp: mmu@4a066000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x4a066000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_dsp";
+		};
+
+		mmu_ipu: mmu@55082000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x55082000 0x100>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu";
+			ti,iommu-bus-err-back;
+		};
+
+		wdt2: wdt@4a314000 {
+			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+			reg = <0x4a314000 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		mcpdm: mcpdm@40132000 {
+			compatible = "ti,omap4-mcpdm";
+			reg = <0x40132000 0x7f>, /* MPU private access */
+			      <0x49032000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mcpdm";
+			dmas = <&sdma 65>,
+			       <&sdma 66>;
+			dma-names = "up_link", "dn_link";
+			status = "disabled";
+		};
+
+		dmic: dmic@4012e000 {
+			compatible = "ti,omap4-dmic";
+			reg = <0x4012e000 0x7f>, /* MPU private access */
+			      <0x4902e000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "dmic";
+			dmas = <&sdma 67>;
+			dma-names = "up_link";
+			status = "disabled";
+		};
+
+		mcbsp1: mcbsp@40122000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40122000 0xff>, /* MPU private access */
+			      <0x49022000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+			dmas = <&sdma 33>,
+			       <&sdma 34>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp2: mcbsp@40124000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40124000 0xff>, /* MPU private access */
+			      <0x49024000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+			dmas = <&sdma 17>,
+			       <&sdma 18>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp3: mcbsp@40126000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40126000 0xff>, /* MPU private access */
+			      <0x49026000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+			dmas = <&sdma 19>,
+			       <&sdma 20>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp4: mcbsp@48096000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x48096000 0xff>; /* L4 Interconnect */
+			reg-names = "mpu";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp4";
+			dmas = <&sdma 31>,
+			       <&sdma 32>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		keypad: keypad@4a31c000 {
+			compatible = "ti,omap4-keypad";
+			reg = <0x4a31c000 0x80>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			reg-names = "mpu";
+			ti,hwmods = "kbd";
+		};
+
+		dmm@4e000000 {
+			compatible = "ti,omap4-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <0 113 0x4>;
+			ti,hwmods = "dmm";
+		};
+
+		emif1: emif@4c000000 {
+			compatible = "ti,emif-4d";
+			reg = <0x4c000000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "emif1";
+			ti,no-idle-on-init;
+			phy-type = <1>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif@4d000000 {
+			compatible = "ti,emif-4d";
+			reg = <0x4d000000 0x100>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "emif2";
+			ti,no-idle-on-init;
+			phy-type = <1>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		ocp2scp@4a0ad000 {
+			compatible = "ti,omap-ocp2scp";
+			reg = <0x4a0ad000 0x1f>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp_usb_phy";
+			usb2_phy: usb2phy@4a0ad080 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a0ad080 0x58>;
+				ctrl-module = <&omap_control_usb2phy>;
+				clocks = <&usb_phy_cm_clk32k>;
+				clock-names = "wkupclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		mailbox: mailbox@4a0f4000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4a0f4000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <3>;
+			ti,mbox-num-fifos = <8>;
+			mbox_ipu: mbox_ipu {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <1 0 0>;
+			};
+			mbox_dsp: mbox_dsp {
+				ti,mbox-tx = <3 0 0>;
+				ti,mbox-rx = <2 0 0>;
+			};
+		};
+
+		timer1: timer@4a318000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x4a318000 0x80>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap4430-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap4430-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@40138000 {
+			compatible = "ti,omap4430-timer";
+			reg = <0x40138000 0x80>,
+			      <0x49038000 0x80>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4013a000 {
+			compatible = "ti,omap4430-timer";
+			reg = <0x4013a000 0x80>,
+			      <0x4903a000 0x80>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4013c000 {
+			compatible = "ti,omap4430-timer";
+			reg = <0x4013c000 0x80>,
+			      <0x4903c000 0x80>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4013e000 {
+			compatible = "ti,omap4430-timer";
+			reg = <0x4013e000 0x80>,
+			      <0x4903e000 0x80>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap4430-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap3430-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap4430-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		usbhstll: usbhstll@4a062000 {
+			compatible = "ti,usbhs-tll";
+			reg = <0x4a062000 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "usb_tll_hs";
+		};
+
+		usbhshost: usbhshost@4a064000 {
+			compatible = "ti,usbhs-host";
+			reg = <0x4a064000 0x800>;
+			ti,hwmods = "usb_host_hs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&init_60m_fclk>,
+				 <&xclk60mhsp1_ck>,
+				 <&xclk60mhsp2_ck>;
+			clock-names = "refclk_60m_int",
+				      "refclk_60m_ext_p1",
+				      "refclk_60m_ext_p2";
+
+			usbhsohci: ohci@4a064800 {
+				compatible = "ti,ohci-omap3";
+				reg = <0x4a064800 0x400>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usbhsehci: ehci@4a064c00 {
+				compatible = "ti,ehci-omap";
+				reg = <0x4a064c00 0x400>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		omap_control_usb2phy: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usbotg: control-phy@4a00233c {
+			compatible = "ti,control-phy-otghs";
+			reg = <0x4a00233c 0x4>;
+			reg-names = "otghs_control";
+		};
+
+		usb_otg_hs: usb_otg_hs@4a0ab000 {
+			compatible = "ti,omap4-musb";
+			reg = <0x4a0ab000 0x7ff>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc", "dma";
+			ti,hwmods = "usb_otg_hs";
+			usb-phy = <&usb2_phy>;
+			phys = <&usb2_phy>;
+			phy-names = "usb2-phy";
+			multipoint = <1>;
+			num-eps = <16>;
+			ram-bits = <12>;
+			ctrl-module = <&omap_control_usbotg>;
+		};
+
+		aes: aes@4b501000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x4b501000 0xa0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 111>, <&sdma 110>;
+			dma-names = "tx", "rx";
+		};
+
+		des: des@480a5000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x480a5000 0xa0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&sdma 117>, <&sdma 116>;
+			dma-names = "tx", "rx";
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			ti,tranxdone-status-mask = <0x80>;
+			clocks = <&sys_clkin_ck>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			status = "disabled";
+		};
+
+		abb_iva: regulator-abb-iva {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_iva";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			ti,tranxdone-status-mask = <0x80000000>;
+			clocks = <&sys_clkin_ck>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			status = "disabled";
+		};
+
+		dss: dss@58000000 {
+			compatible = "ti,omap4-dss";
+			reg = <0x58000000 0x80>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&dss_dss_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@58001000 {
+				compatible = "ti,omap4-dispc";
+				reg = <0x58001000 0x1000>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss_dss_clk>;
+				clock-names = "fck";
+			};
+
+			rfbi: encoder@58002000  {
+				compatible = "ti,omap4-rfbi";
+				reg = <0x58002000 0x1000>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+				clocks = <&dss_dss_clk>, <&l3_div_ck>;
+				clock-names = "fck", "ick";
+			};
+
+			venc: encoder@58003000 {
+				compatible = "ti,omap4-venc";
+				reg = <0x58003000 0x1000>;
+				status = "disabled";
+				ti,hwmods = "dss_venc";
+				clocks = <&dss_tv_clk>;
+				clock-names = "fck";
+			};
+
+			dsi1: encoder@58004000 {
+				compatible = "ti,omap4-dsi";
+				reg = <0x58004000 0x200>,
+				      <0x58004200 0x40>,
+				      <0x58004300 0x20>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi1";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			dsi2: encoder@58005000 {
+				compatible = "ti,omap4-dsi";
+				reg = <0x58005000 0x200>,
+				      <0x58005200 0x40>,
+				      <0x58005300 0x20>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi2";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			hdmi: encoder@58006000 {
+				compatible = "ti,omap4-hdmi";
+				reg = <0x58006000 0x200>,
+				      <0x58006200 0x100>,
+				      <0x58006300 0x100>,
+				      <0x58006400 0x1000>;
+				reg-names = "wp", "pll", "phy", "core";
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_hdmi";
+				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+				dmas = <&sdma 76>;
+				dma-names = "audio_tx";
+			};
+		};
+	};
+};
+
+/include/ "omap44xx-clocks.dtsi"
diff --git a/src/arm/omap443x-clocks.dtsi b/src/arm/omap443x-clocks.dtsi
new file mode 100644
index 000000000000..2bd2166f88d3
--- /dev/null
+++ b/src/arm/omap443x-clocks.dtsi
@@ -0,0 +1,18 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm_clocks {
+	bandgap_fclk: bandgap_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/src/arm/omap443x.dtsi b/src/arm/omap443x.dtsi
new file mode 100644
index 000000000000..0adfa1d1ef20
--- /dev/null
+++ b/src/arm/omap443x.dtsi
@@ -0,0 +1,74 @@
+/*
+ * Device Tree Source for OMAP443x SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap4.dtsi"
+
+/ {
+	cpus {
+		cpu0: cpu@0 {
+			/* OMAP443x variants OPP50-OPPNT */
+			operating-points = <
+				/* kHz    uV */
+				300000  1025000
+				600000  1200000
+				800000  1313000
+				1008000 1375000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <3>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+	};
+
+	ocp {
+		bandgap: bandgap {
+			reg = <0x4a002260 0x4
+			       0x4a00232C 0x4>;
+			compatible = "ti,omap4430-bandgap";
+
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	ocp {
+		abb_mpu: regulator-abb-mpu {
+			status = "okay";
+
+			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
+			reg-names = "base-address", "int-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1025000		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1313000		0	0	0	0	0
+			1375000		1	0	0	0	0
+			1389000		1	0	0	0	0
+			>;
+		};
+
+		/* Default unused, just provide register info for record */
+		abb_iva: regulator-abb-iva {
+			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
+			reg-names = "base-address", "int-address";
+		};
+
+	};
+
+};
+
+/include/ "omap443x-clocks.dtsi"
diff --git a/src/arm/omap4460.dtsi b/src/arm/omap4460.dtsi
new file mode 100644
index 000000000000..194f9ef0a009
--- /dev/null
+++ b/src/arm/omap4460.dtsi
@@ -0,0 +1,93 @@
+/*
+ * Device Tree Source for OMAP4460 SoC
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#include "omap4.dtsi"
+
+/ {
+	cpus {
+		/* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
+		cpu0: cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				350000  1025000
+				700000  1200000
+				920000  1313000
+			>;
+			clock-latency = <300000>; /* From legacy driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "debugss";
+	};
+
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+	};
+
+	ocp {
+		bandgap: bandgap {
+			reg = <0x4a002260 0x4
+			       0x4a00232C 0x4
+			       0x4a002378 0x18>;
+			compatible = "ti,omap4460-bandgap";
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
+			gpios = <&gpio3 22 0>; /* tshut */
+
+			#thermal-sensor-cells = <0>;
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			status = "okay";
+
+			reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			1025000		0	0	0	0	0
+			1200000		0	0	0	0	0
+			1313000		0	0	0x100000 0x40000 0
+			1375000		1	0	0	0	0
+			1389000		1	0	0	0	0
+			>;
+		};
+
+		abb_iva: regulator-abb-iva {
+			status = "okay";
+
+			reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
+			      <0x4A002268 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address";
+
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m	fbb_m	vset_m*/
+			950000		0	0	0	0	0
+			1140000		0	0	0	0	0
+			1291000		0	0	0x200000 0	0
+			1375000		1	0	0	0	0
+			1376000		1	0	0	0	0
+			>;
+		};
+	};
+
+};
+
+/include/ "omap446x-clocks.dtsi"
diff --git a/src/arm/omap446x-clocks.dtsi b/src/arm/omap446x-clocks.dtsi
new file mode 100644
index 000000000000..be033e9803e9
--- /dev/null
+++ b/src/arm/omap446x-clocks.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&prm_clocks {
+	div_ts_ck: div_ts_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1888>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	bandgap_ts_fclk: bandgap_ts_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&div_ts_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1888>;
+	};
+};
diff --git a/src/arm/omap44xx-clocks.dtsi b/src/arm/omap44xx-clocks.dtsi
new file mode 100644
index 000000000000..f2c48f09824e
--- /dev/null
+++ b/src/arm/omap44xx-clocks.dtsi
@@ -0,0 +1,1643 @@
+/*
+ * Device Tree Source for OMAP4 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm1_clocks {
+	extalt_clkin_ck: extalt_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <59000000>;
+	};
+
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	tie_low_clock_ck: tie_low_clock_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	utmi_phy_clkout_ck: utmi_phy_clkout_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60motg_ck: xclk60motg_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+		reg = <0x01f0>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x0528>;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m6x2_ck: dpll_core_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ddrphy_ck: ddrphy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_m5x2_ck: dpll_core_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	div_core_ck: div_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	div_iva_hs_clk: div_iva_hs_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x01dc>;
+		ti,index-power-of-two;
+	};
+
+	div_mpu_hs_clk: div_mpu_hs_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_m5x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x019c>;
+		ti,index-power-of-two;
+	};
+
+	dpll_core_m4x2_ck: dpll_core_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dll_clk_div_ck: dll_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_abe_m2_ck: dpll_abe_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0134>;
+	};
+
+	dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
+	};
+
+	dpll_core_m7x2_ck: dpll_core_m7x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_m4x2_ck: dpll_iva_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_iva_m5x2_ck: dpll_iva_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	per_hs_clk_div_ck: per_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_hs_clk_div_ck: usb_hs_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_div_ck: l3_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&div_core_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	l4_div_ck: l4_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <8>;
+		ti,max-div = <2>;
+		reg = <0x0100>;
+	};
+
+	lp_clk_div_ck: lp_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	mpu_periphclk: mpu_periphclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_mpu_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	ocp_abe_iclk: ocp_abe_iclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x0528>;
+		ti,dividers = <2>, <1>;
+	};
+
+	per_abe_24m_fclk: per_abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dmic_sync_mux_ck: dmic_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0538>;
+	};
+
+	func_dmic_abe_gfclk: func_dmic_abe_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0538>;
+	};
+
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0540>;
+	};
+
+	func_mcasp_abe_gfclk: func_mcasp_abe_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0540>;
+	};
+
+	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0548>;
+	};
+
+	func_mcbsp1_gfclk: func_mcbsp1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0548>;
+	};
+
+	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0550>;
+	};
+
+	func_mcbsp2_gfclk: func_mcbsp2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>;
+		ti,bit-shift = <25>;
+		reg = <0x0558>;
+	};
+
+	func_mcbsp3_gfclk: func_mcbsp3_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	slimbus1_fclk_1: slimbus1_fclk_1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_24m_clk>;
+		ti,bit-shift = <9>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_fclk_0: slimbus1_fclk_0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&abe_24m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_fclk_2: slimbus1_fclk_2 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x0560>;
+	};
+
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_clk>;
+		ti,bit-shift = <11>;
+		reg = <0x0560>;
+	};
+
+	timer5_sync_mux: timer5_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer6_sync_mux: timer6_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	timer7_sync_mux: timer7_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0578>;
+	};
+
+	timer8_sync_mux: timer8_sync_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&syc_clk_div_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm_clocks {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	dbgclk_mux_ck: dbgclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
+		reg = <0x0108>;
+	};
+
+	syc_clk_div_ck: syc_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x0100>;
+		ti,max-div = <2>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1838>;
+	};
+
+	dmt1_clk_mux: dmt1_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1840>;
+	};
+
+	usim_ck: usim_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1858>;
+		ti,dividers = <14>, <18>;
+	};
+
+	usim_fclk: usim_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usim_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1858>;
+	};
+
+	pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
+		ti,bit-shift = <20>;
+		reg = <0x1a20>;
+	};
+
+	pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x1a20>;
+	};
+
+	stm_clk_div_ck: stm_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&pmd_stm_clock_mux_ck>;
+		ti,bit-shift = <27>;
+		ti,max-div = <64>;
+		reg = <0x1a20>;
+		ti,index-power-of-two;
+	};
+
+	trace_clk_div_div_ck: trace_clk_div_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&pmd_trace_clk_mux_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1a20>;
+		ti,dividers = <0>, <1>, <2>, <0>, <4>;
+	};
+
+	trace_clk_div_ck: trace_clk_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,clkdm-gate-clock";
+		clocks = <&trace_clk_div_div_ck>;
+	};
+};
+
+&prm_clockdomains {
+	emu_sys_clkdm: emu_sys_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&trace_clk_div_ck>;
+	};
+};
+
+&cm2_clocks {
+	per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+		reg = <0x0150>;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0154>;
+	};
+
+	dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
+	};
+
+	dpll_per_m4x2_ck: dpll_per_m4x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m5x2_ck: dpll_per_m5x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m6x2_ck: dpll_per_m6x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0160>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m7x2_ck: dpll_per_m7x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x01b4>;
+		ti,clock-mult = <1>;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	ducati_clk_mux_ck: ducati_clk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
+		reg = <0x0100>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_24mc_fclk: func_24mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <4>, <8>;
+	};
+
+	func_48mc_fclk: func_48mc_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_64m_fclk: func_64m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		reg = <0x0108>;
+		ti,dividers = <2>, <4>;
+	};
+
+	init_60m_fclk: init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	per_abe_nc_fclk: per_abe_nc_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2_ck>;
+		reg = <0x0108>;
+		ti,max-div = <2>;
+	};
+
+	aes1_fck: aes1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15a0>;
+	};
+
+	aes2_fck: aes2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15a8>;
+	};
+
+	dss_sys_clk: dss_sys_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&syc_clk_div_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1120>;
+	};
+
+	dss_tv_clk: dss_tv_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&extalt_clkin_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1120>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_m5x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1120>;
+		ti,set-rate-parent;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1120>;
+	};
+
+	fdif_fck: fdif_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m4x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <4>;
+		reg = <0x1028>;
+		ti,index-power-of-two;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1460>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1468>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1470>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1478>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1480>;
+	};
+
+	sgx_clk_mux: sgx_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_m7x2_ck>, <&dpll_per_m7x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1220>;
+	};
+
+	hsi_fck: hsi_fck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <4>;
+		reg = <0x1338>;
+		ti,index-power-of-two;
+	};
+
+	iss_ctrlclk: iss_ctrlclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1020>;
+	};
+
+	mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_96m_fclk>, <&per_abe_nc_fclk>;
+		ti,bit-shift = <25>;
+		reg = <0x14e0>;
+	};
+
+	per_mcbsp4_gfclk: per_mcbsp4_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp4_sync_mux_ck>, <&pad_clks_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x14e0>;
+	};
+
+	hsmmc1_fclk: hsmmc1_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x1328>;
+	};
+
+	hsmmc2_fclk: hsmmc2_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_64m_fclk>, <&func_96m_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x1330>;
+	};
+
+	ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x13e0>;
+	};
+
+	sha2md5_fck: sha2md5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x15c8>;
+	};
+
+	slimbus2_fclk_1: slimbus2_fclk_1 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&per_abe_24m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1538>;
+	};
+
+	slimbus2_fclk_0: slimbus2_fclk_0 {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_24mc_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1538>;
+	};
+
+	slimbus2_slimbus_clk: slimbus2_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_slimbus_core_clks_ck>;
+		ti,bit-shift = <10>;
+		reg = <0x1538>;
+	};
+
+	smartreflex_core_fck: smartreflex_core_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0638>;
+	};
+
+	smartreflex_iva_fck: smartreflex_iva_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0630>;
+	};
+
+	smartreflex_mpu_fck: smartreflex_mpu_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_wkup_clk_mux_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0628>;
+	};
+
+	cm2_dm10_mux: cm2_dm10_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1428>;
+	};
+
+	cm2_dm11_mux: cm2_dm11_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1430>;
+	};
+
+	cm2_dm2_mux: cm2_dm2_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1438>;
+	};
+
+	cm2_dm3_mux: cm2_dm3_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1440>;
+	};
+
+	cm2_dm4_mux: cm2_dm4_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1448>;
+	};
+
+	cm2_dm9_mux: cm2_dm9_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1450>;
+	};
+
+	usb_host_fs_fck: usb_host_fs_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <1>;
+		reg = <0x13d0>;
+	};
+
+	utmi_p1_gfclk: utmi_p1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&init_60m_fclk>, <&xclk60mhsp1_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p1_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1358>;
+	};
+
+	utmi_p2_gfclk: utmi_p2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&init_60m_fclk>, <&xclk60mhsp2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p2_gfclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <11>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <12>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_func48mclk: usb_host_hs_func48mclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48mc_fclk>;
+		ti,bit-shift = <15>;
+		reg = <0x1358>;
+	};
+
+	usb_host_hs_fck: usb_host_hs_fck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <1>;
+		reg = <0x1358>;
+	};
+
+	otg_60m_gfclk: otg_60m_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&utmi_phy_clkout_ck>, <&xclk60motg_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1360>;
+	};
+
+	usb_otg_hs_xclk: usb_otg_hs_xclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&otg_60m_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1360>;
+	};
+
+	usb_otg_hs_ick: usb_otg_hs_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3_div_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x1360>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&init_60m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1368>;
+	};
+
+	usb_tll_hs_ick: usb_tll_hs_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4_div_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x1368>;
+	};
+};
+
+&cm2_clockdomains {
+	l3_init_clkdm: l3_init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>, <&usb_host_fs_fck>;
+	};
+};
+
+&scrm_clocks {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclk5_src_gate_ck: auxclk5_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_mux_ck: auxclk5_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0324>;
+	};
+
+	auxclk5_src_ck: auxclk5_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
+	};
+
+	auxclk5_ck: auxclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk5_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0324>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+
+	auxclkreq4_ck: auxclkreq4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0220>;
+	};
+
+	auxclkreq5_ck: auxclkreq5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0224>;
+	};
+};
diff --git a/src/arm/omap5-cm-t54.dts b/src/arm/omap5-cm-t54.dts
new file mode 100644
index 000000000000..b54b271e153b
--- /dev/null
+++ b/src/arm/omap5-cm-t54.dts
@@ -0,0 +1,680 @@
+/*
+ * Support for CompuLab CM-T54
+ */
+/dts-v1/;
+
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "CompuLab CM-T54";
+	compatible = "compulab,omap5-cm-t54", "ti,omap5";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x7F000000>; /* 2048 MB */
+	};
+
+	aliases {
+		display0 = &hdmi0;
+		display1 = &dvi0;
+		display2 = &lcd0;
+	};
+
+	vmmcsd_fixed: fixed-regulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vwlan_pdn_fixed: fixed-regulator-vwlan-pdn {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_pdn_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ldo2_reg>;
+		gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>;   /* gpio4_109 */
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	vwlan_fixed: fixed-regulator-vwlan {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vwlan_pdn_fixed>;
+		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;   /* gpio4_110 */
+		startup-delay-us = <1000>;
+		enable-active-high;
+	};
+
+	ads7846reg: ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
+	};
+
+	/* HS USB Host PHY on PORT 3 */
+	hsusb3_phy: hsusb3_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "Heartbeat";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	lcd0: display {
+                compatible = "startek,startek-kd050c", "panel-dpi";
+                label = "lcd";
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&lcd_pins>;
+
+                enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
+
+                panel-timing {
+                        clock-frequency = <33000000>;
+                        hactive = <800>;
+                        vactive = <480>;
+                        hfront-porch = <40>;
+                        hback-porch = <40>;
+                        hsync-len = <43>;
+                        vback-porch = <29>;
+                        vfront-porch = <13>;
+                        vsync-len = <3>;
+                        hsync-active = <0>;
+                        vsync-active = <0>;
+                        de-active = <1>;
+                        pixelclk-active = <1>;
+                };
+
+                port {
+                        lcd_in: endpoint {
+                                remote-endpoint = <&dpi_lcd_out>;
+                        };
+                };
+        };
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_conn_pins>;
+
+		hpd-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
+	tfp410: encoder@0 {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint@0 {
+					remote-endpoint = <&dpi_dvi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint@0 {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	dvi0: connector@1 {
+		compatible = "dvi-connector";
+		label = "dvi";
+
+		digital;
+
+		ddc-i2c-bus = <&i2c2>;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+};
+
+&omap5_pmx_wkup {
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			0x02 (PIN_INPUT_PULLDOWN | MUX_MODE6)  /* llib_wakereqin.gpio1_wk15 */
+		>;
+	};
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&led_gpio_pins
+			&usbhost_pins
+	>;
+
+	led_gpio_pins: pinmux_led_gpio_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */
+			OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01b8, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+			OMAP5_IOPAD(0x01ba, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
+			OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */
+			OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */
+			OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */
+			OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */
+			OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */
+			OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */
+			OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */
+			OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */
+			OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */
+			OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */
+			OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */
+			OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */
+			OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */
+			OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */
+			OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */
+			OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */
+			OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */
+			OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */
+			OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */
+		>;
+	};
+
+	wlan_gpios_pins: pinmux_wlan_gpios_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_ul_data.gpio4_109 */
+			OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_dl_data.gpio4_110 */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_strobe */
+			OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0)  /* usbb2_hsic_data */
+
+			OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_strobe */
+			OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0)  /* usbb3_hsic_data */
+
+			OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */
+			OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x013c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec */
+			OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */
+			OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */
+		>;
+	};
+
+	lcd_pins: pinmux_lcd_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */
+		>;
+	};
+
+	hdmi_conn_pins: pinmux_hdmi_conn_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0104, PIN_OUTPUT | MUX_MODE3) /* rfbi_data15.dispc_data15 */
+			OMAP5_IOPAD(0x0106, PIN_OUTPUT | MUX_MODE3) /* rfbi_data14.dispc_data14 */
+			OMAP5_IOPAD(0x0108, PIN_OUTPUT | MUX_MODE3) /* rfbi_data13.dispc_data13 */
+			OMAP5_IOPAD(0x010a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data12.dispc_data12 */
+			OMAP5_IOPAD(0x010c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data11.dispc_data11 */
+			OMAP5_IOPAD(0x010e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data10.dispc_data10 */
+			OMAP5_IOPAD(0x0110, PIN_OUTPUT | MUX_MODE3) /* rfbi_data9.dispc_data9 */
+			OMAP5_IOPAD(0x0112, PIN_OUTPUT | MUX_MODE3) /* rfbi_data8.dispc_data8 */
+			OMAP5_IOPAD(0x0114, PIN_OUTPUT | MUX_MODE3) /* rfbi_data7.dispc_data7 */
+			OMAP5_IOPAD(0x0116, PIN_OUTPUT | MUX_MODE3) /* rfbi_data6.dispc_data6 */
+			OMAP5_IOPAD(0x0118, PIN_OUTPUT | MUX_MODE3) /* rfbi_data5.dispc_data5 */
+			OMAP5_IOPAD(0x011a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data4.dispc_data4 */
+			OMAP5_IOPAD(0x011c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data3.dispc_data3 */
+			OMAP5_IOPAD(0x011e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data2.dispc_data2 */
+			OMAP5_IOPAD(0x0120, PIN_OUTPUT | MUX_MODE3) /* rfbi_data1.dispc_data1 */
+			OMAP5_IOPAD(0x0122, PIN_OUTPUT | MUX_MODE3) /* rfbi_data0.dispc_data0 */
+			OMAP5_IOPAD(0x0124, PIN_OUTPUT | MUX_MODE3) /* rfbi_we.dispc_vsync */
+			OMAP5_IOPAD(0x0126, PIN_OUTPUT | MUX_MODE3) /* rfbi_cs0.dispc_hsync */
+			OMAP5_IOPAD(0x0128, PIN_OUTPUT | MUX_MODE3) /* rfbi_a0.dispc_de */
+			OMAP5_IOPAD(0x012a, PIN_OUTPUT | MUX_MODE3) /* rfbi_re.dispc_pclk */
+			OMAP5_IOPAD(0x012c, PIN_OUTPUT | MUX_MODE3) /* rfbi_hsync0.dispc_data17 */
+			OMAP5_IOPAD(0x012e, PIN_OUTPUT | MUX_MODE3) /* rfbi_te_vsync0.dispc_data16 */
+			OMAP5_IOPAD(0x0130, PIN_OUTPUT | MUX_MODE3) /* gpio6_182.dispc_data18 */
+			OMAP5_IOPAD(0x0132, PIN_OUTPUT | MUX_MODE3) /* gpio6_183.dispc_data19 */
+			OMAP5_IOPAD(0x0134, PIN_OUTPUT | MUX_MODE3) /* gpio6_184.dispc_data20 */
+			OMAP5_IOPAD(0x0136, PIN_OUTPUT | MUX_MODE3) /* gpio6_185.dispc_data21 */
+			OMAP5_IOPAD(0x0138, PIN_OUTPUT | MUX_MODE3) /* gpio6_186.dispc_data22 */
+			OMAP5_IOPAD(0x013a, PIN_OUTPUT | MUX_MODE3) /* gpio6_187.dispc_data23 */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
+			OMAP5_IOPAD(0x00fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
+			OMAP5_IOPAD(0x0100, PIN_INPUT | MUX_MODE0) /* mcspi2_somi */
+			OMAP5_IOPAD(0x0102, PIN_INPUT | MUX_MODE0) /* mcspi2_cs0 */
+		>;
+	};
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+
+	/* touch controller */
+	ads7846@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 0>;			/* gpio1_wk15 */
+		pendown-gpio = <&gpio1 15 0>;
+
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		ti,debounce-max = /bits/ 16 <30>;
+		ti,debounce-tol = /bits/ 16 <10>;
+		ti,debounce-rep = /bits/ 16 <1>;
+
+		linux,wakeup;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&ldo9_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc3_pins
+		&wlan_gpios_pins
+	>;
+	vmmc-supply = <&vwlan_fixed>;
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	palmas: palmas@48 {
+		compatible = "ti,palmas";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+		interrupt-parent = <&gic>;
+		reg = <0x48>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,system-power-controller;
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+		};
+
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+		};
+
+		palmas_pmic {
+			compatible = "ti,palmas-pmic";
+			interrupt-parent = <&palmas>;
+			interrupts = <14 IRQ_TYPE_NONE>;
+			interrupt-name = "short-irq";
+
+			ti,ldo6-vibrator;
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					ti,smps-range = <0x80>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out2_reg: smps10_out2 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out2";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_3V3_WLAN */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					startup-delay-us = <1000>;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VCC_1V5_AUD */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+					regulator-name = "ldo6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
+					regulator-name = "ldo7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
+				};
+
+				ldo8_reg: ldo8 {
+					/* VDD_3V_GP: act led/serial console */
+					regulator-name = "ldo8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3250000>;
+					regulator-max-microvolt = <3250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <100000>;
+};
+
+&usbhshost {
+	port2-mode = "ehci-hsic";
+	port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&usb3 {
+       extcon = <&extcon_usb3>;
+       vbus-supply = <&smps10_out1_reg>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_dvi_out: endpoint@0 {
+			remote-endpoint = <&tfp410_in>;
+			data-lines = <24>;
+		};
+
+		dpi_lcd_out: endpoint@1 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dsi2 {
+	status = "ok";
+	vdd-supply = <&ldo4_reg>;
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo4_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+			lanes = <1 0 3 2 5 4 7 6>;
+		};
+	};
+};
diff --git a/src/arm/omap5-core-thermal.dtsi b/src/arm/omap5-core-thermal.dtsi
new file mode 100644
index 000000000000..19212ac6eef0
--- /dev/null
+++ b/src/arm/omap5-core-thermal.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Device Tree Source for OMAP543x SoC CORE thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+core_thermal: core_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     2>;
+
+	trips {
+		core_crit: core_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/src/arm/omap5-gpu-thermal.dtsi b/src/arm/omap5-gpu-thermal.dtsi
new file mode 100644
index 000000000000..1b87aca88b77
--- /dev/null
+++ b/src/arm/omap5-gpu-thermal.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Device Tree Source for OMAP543x SoC GPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+gpu_thermal: gpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     1>;
+
+	trips {
+		gpu_crit: gpu_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/src/arm/omap5-sbc-t54.dts b/src/arm/omap5-sbc-t54.dts
new file mode 100644
index 000000000000..337bbbc01a35
--- /dev/null
+++ b/src/arm/omap5-sbc-t54.dts
@@ -0,0 +1,51 @@
+/*
+ * Suppport for CompuLab CM-T54 on SB-T54 baseboard
+ */
+
+#include "omap5-cm-t54.dts"
+
+/ {
+	model = "CompuLab CM-T54 on SB-T54";
+	compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";
+};
+
+&omap5_pmx_core {
+	i2c4_pins: pinmux_i2c4_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
+			OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
+		>;
+	};
+
+	mmc1_aux_pins: pinmux_mmc1_aux_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */
+			OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */
+		>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&mmc1_pins
+		&mmc1_aux_pins
+	>;
+	cd-inverted;
+	wp-inverted;
+	cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */
+	wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	clock-frequency = <400000>;
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
diff --git a/src/arm/omap5-uevm.dts b/src/arm/omap5-uevm.dts
new file mode 100644
index 000000000000..159720d6c956
--- /dev/null
+++ b/src/arm/omap5-uevm.dts
@@ -0,0 +1,636 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "TI OMAP5 uEVM board";
+	compatible = "ti,omap5-uevm", "ti,omap5";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x7F000000>; /* 2032 MB */
+	};
+
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	vmmcsd_fixed: fixedregulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */
+		clocks = <&auxclk1_ck>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+	};
+
+	/* HS USB Host PHY on PORT 3 */
+	hsusb3_phy: hsusb3_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "omap5:blue:usr1";
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s015";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tpd12s015_pins>;
+
+		gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>,	/* TCA6424A P01, CT CP HPD */
+			<&gpio9 1 GPIO_ACTIVE_HIGH>,	/* TCA6424A P00, LS OE */
+			<&gpio7 1 GPIO_ACTIVE_HIGH>;	/* GPIO 193, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "b";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	sound: sound {
+		compatible = "ti,abe-twl6040";
+		ti,model = "omap5-uevm";
+
+		ti,mclk-freq = <19200000>;
+
+		ti,mcpdm = <&mcpdm>;
+
+		ti,twl6040 = <&twl6040>;
+
+		/* Audio routing */
+		ti,audio-routing =
+			"Headset Stereophone", "HSOL",
+			"Headset Stereophone", "HSOR",
+			"Line Out", "AUXL",
+			"Line Out", "AUXR",
+			"HSMIC", "Headset Mic",
+			"Headset Mic", "Headset Mic Bias",
+			"AFML", "Line In",
+			"AFMR", "Line In";
+	};
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_pins
+			&led_gpio_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			0x17e (PIN_OUTPUT | MUX_MODE6)	/* mcspi1_somi.gpio5_141 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
+			0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
+			0x160 (PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
+			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
+			0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
+			0x150 (PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
+			0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
+			0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
+			0x158 (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
+			0x15a (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c5_pins: pinmux_i2c5_pins {
+		pinctrl-single,pins = <
+			0x184 (PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
+			0x186 (PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
+			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
+			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
+			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs0 */
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi3_somi */
+			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi3_cs0 */
+			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi3_simo */
+			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi3_clk */
+		>;
+	};
+
+	mcspi4_pins: pinmux_mcspi4_pins {
+		pinctrl-single,pins = <
+			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_clk */
+			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi4_simo */
+			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi4_somi */
+			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi4_cs0 */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+			0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+			0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+			0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+			0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+			0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+		>;
+	};
+
+	led_gpio_pins: pinmux_led_gpio_pins {
+		pinctrl-single,pins = <
+			0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+			0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+			0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+			0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+			0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+		>;
+	};
+
+	uart5_pins: pinmux_uart5_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+			0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+			0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+			0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+		>;
+	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			0x0fc (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			0x100 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
+			0x102 (PIN_INPUT | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6)	/* hdmi_hpd.gpio7_193 */
+		>;
+	};
+};
+
+&omap5_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_wkup_pins
+	>;
+
+	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
+		pinctrl-single,pins = <
+			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&ldo9_reg>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	palmas: palmas@48 {
+		compatible = "ti,palmas";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+		interrupt-parent = <&gic>;
+		reg = <0x48>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,system-power-controller;
+
+		extcon_usb3: palmas_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			ti,wakeup;
+		};
+
+		clk32kgaudio: palmas_clk32k@1 {
+			compatible = "ti,palmas-clk32kgaudio";
+			#clock-cells = <0>;
+		};
+
+		palmas_pmic {
+			compatible = "ti,palmas-pmic";
+			interrupt-parent = <&palmas>;
+			interrupts = <14 IRQ_TYPE_NONE>;
+			interrupt-name = "short-irq";
+
+			ti,ldo6-vibrator;
+
+			regulators {
+				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2100000>;
+					ti,smps-range = <0x80>;
+				};
+
+				smps10_out2_reg: smps10_out2 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out2";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps10_out1_reg: smps10_out1 {
+					/* VBUS_5V_OTG */
+					regulator-name = "smps10_out1";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VCC_2V8_DISP: Does not go anywhere */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDAPHY_MDM: vdda_lli */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-boot-on;
+					/* Only if Modem is used */
+					status = "disabled";
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
+					regulator-name = "ldo6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
+					regulator-name = "ldo7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
+				};
+
+				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
+					regulator-name = "ldo8";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
+				};
+
+				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3250000>;
+					regulator-max-microvolt = <3250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	twl6040: twl@4b {
+		compatible = "ti,twl6040";
+		reg = <0x4b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&twl6040_pins>;
+
+		interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
+		interrupt-parent = <&gic>;
+		ti,audpwron-gpio = <&gpio5 13 0>;  /* gpio line 141 */
+
+		vio-supply = <&smps7_reg>;
+		v2v1-supply = <&smps9_reg>;
+		enable-active-high;
+
+		clocks = <&clk32kgaudio>;
+		clock-names = "clk32k";
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+
+	clock-frequency = <400000>;
+
+	gpio9: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&mcpdm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcpdm_pins>;
+	status = "okay";
+};
+
+&mcbsp1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+	status = "okay";
+};
+
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+};
+
+&usbhshost {
+	port2-mode = "ehci-hsic";
+	port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&usb3 {
+	extcon = <&extcon_usb3>;
+	vbus-supply = <&smps10_out1_reg>;
+};
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi4_pins>;
+};
+
+&uart1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart3_pins>;
+};
+
+&uart5 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart5_pins>;
+};
+
+&cpu0 {
+	cpu0-supply = <&smps123_reg>;
+};
+
+&dss {
+	status = "ok";
+};
+
+&hdmi {
+	status = "ok";
+	vdda-supply = <&ldo4_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
diff --git a/src/arm/omap5.dtsi b/src/arm/omap5.dtsi
new file mode 100644
index 000000000000..b321fdf42c9f
--- /dev/null
+++ b/src/arm/omap5.dtsi
@@ -0,0 +1,1082 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * Based on "omap4.dtsi"
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	compatible = "ti,omap5";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000 1060000
+				1500000 1250000
+			>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+		};
+	};
+
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+		#include "omap5-gpu-thermal.dtsi"
+		#include "omap5-core-thermal.dtsi"
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		/* PPI secure/nonsecure IRQ */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gic: interrupt-controller@48211000 {
+		compatible = "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48211000 0x1000>,
+		      <0x48212000 0x1000>,
+		      <0x48214000 0x2000>,
+		      <0x48216000 0x2000>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap4-mpu";
+			ti,hwmods = "mpu";
+			sram = <&ocmcram>;
+		};
+	};
+
+	/*
+	 * XXX: Use a flat representation of the OMAP3 interconnect.
+	 * The real OMAP interconnect network is quite complex.
+	 * Since it will not bring real advantage to represent that in DT for
+	 * the moment, just use a fake OCP bus entry to represent the whole bus
+	 * hierarchy.
+	 */
+	ocp {
+		compatible = "ti,omap4-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
+		reg = <0x44000000 0x2000>,
+		      <0x44800000 0x3000>,
+		      <0x45000000 0x4000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		prm: prm@4ae06000 {
+			compatible = "ti,omap5-prm";
+			reg = <0x4ae06000 0x3000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+
+			prm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			prm_clockdomains: clockdomains {
+			};
+		};
+
+		cm_core_aon: cm_core_aon@4a004000 {
+			compatible = "ti,omap5-cm-core-aon";
+			reg = <0x4a004000 0x2000>;
+
+			cm_core_aon_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_core_aon_clockdomains: clockdomains {
+			};
+		};
+
+		scrm: scrm@4ae0a000 {
+			compatible = "ti,omap5-scrm";
+			reg = <0x4ae0a000 0x2000>;
+
+			scrm_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			scrm_clockdomains: clockdomains {
+			};
+		};
+
+		cm_core: cm_core@4a008000 {
+			compatible = "ti,omap5-cm-core";
+			reg = <0x4a008000 0x3000>;
+
+			cm_core_clocks: clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cm_core_clockdomains: clockdomains {
+			};
+		};
+
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		omap5_pmx_core: pinmux@4a002840 {
+			compatible = "ti,omap5-padconf", "pinctrl-single";
+			reg = <0x4a002840 0x01b6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+		omap5_pmx_wkup: pinmux@4ae0c840 {
+			compatible = "ti,omap5-padconf", "pinctrl-single";
+			reg = <0x4ae0c840 0x0038>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0x7fff>;
+		};
+
+		omap5_padconf_global: tisyscon@4a002da0 {
+			compatible = "syscon";
+			reg = <0x4A002da0 0xec>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x60 0x4>;
+			syscon = <&omap5_padconf_global>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
+		ocmcram: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x20000>; /* 128k */
+		};
+
+		sdma: dma-controller@4a056000 {
+			compatible = "ti,omap4430-sdma";
+			reg = <0x4a056000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <32>;
+			#dma-requests = <127>;
+		};
+
+		gpio1: gpio@4ae10000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4ae10000 0x200>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio1";
+			ti,gpio-always-on;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@48055000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio2";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@48057000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio3";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio@48059000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio4";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio@4805b000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio5";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio@4805d000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio6";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio7: gpio@48051000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48051000 0x200>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio7";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio8: gpio@48053000 {
+			compatible = "ti,omap4-gpio";
+			reg = <0x48053000 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "gpio8";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,omap4430-gpmc";
+			reg = <0x50000000 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			gpmc,num-cs = <8>;
+			gpmc,num-waitpins = <4>;
+			ti,hwmods = "gpmc";
+			clocks = <&l3_iclk_div>;
+			clock-names = "fck";
+		};
+
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c1";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c2";
+		};
+
+		i2c3: i2c@48060000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c3";
+		};
+
+		i2c4: i2c@4807a000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807a000 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c4";
+		};
+
+		i2c5: i2c@4807c000 {
+			compatible = "ti,omap4-i2c";
+			reg = <0x4807c000 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "i2c5";
+		};
+
+		hwspinlock: spinlock@4a0f6000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x4a0f6000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
+		mcspi1: spi@48098000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x48098000 0x200>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi1";
+			ti,spi-num-cs = <4>;
+			dmas = <&sdma 35>,
+			       <&sdma 36>,
+			       <&sdma 37>,
+			       <&sdma 38>,
+			       <&sdma 39>,
+			       <&sdma 40>,
+			       <&sdma 41>,
+			       <&sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: spi@4809a000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x4809a000 0x200>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi2";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 43>,
+			       <&sdma 44>,
+			       <&sdma 45>,
+			       <&sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		mcspi3: spi@480b8000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480b8000 0x200>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi3";
+			ti,spi-num-cs = <2>;
+			dmas = <&sdma 15>, <&sdma 16>;
+			dma-names = "tx0", "rx0";
+		};
+
+		mcspi4: spi@480ba000 {
+			compatible = "ti,omap4-mcspi";
+			reg = <0x480ba000 0x200>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "mcspi4";
+			ti,spi-num-cs = <1>;
+			dmas = <&sdma 70>, <&sdma 71>;
+			dma-names = "tx0", "rx0";
+		};
+
+		uart1: serial@4806a000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+			clock-frequency = <48000000>;
+		};
+
+		uart2: serial@4806c000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			clock-frequency = <48000000>;
+		};
+
+		uart3: serial@48020000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			clock-frequency = <48000000>;
+		};
+
+		uart4: serial@4806e000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			clock-frequency = <48000000>;
+		};
+
+		uart5: serial@48066000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48066000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			clock-frequency = <48000000>;
+		};
+
+		uart6: serial@48068000 {
+			compatible = "ti,omap4-uart";
+			reg = <0x48068000 0x100>;
+			interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			clock-frequency = <48000000>;
+		};
+
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc3: mmc@480ad000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			dmas = <&sdma 77>, <&sdma 78>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc4: mmc@480d1000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc4";
+			ti,needs-special-reset;
+			dmas = <&sdma 57>, <&sdma 58>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc5: mmc@480d5000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d5000 0x400>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmc5";
+			ti,needs-special-reset;
+			dmas = <&sdma 59>, <&sdma 60>;
+			dma-names = "tx", "rx";
+		};
+
+		mmu_dsp: mmu@4a066000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x4a066000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_dsp";
+		};
+
+		mmu_ipu: mmu@55082000 {
+			compatible = "ti,omap4-iommu";
+			reg = <0x55082000 0x100>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mmu_ipu";
+			ti,iommu-bus-err-back;
+		};
+
+		keypad: keypad@4ae1c000 {
+			compatible = "ti,omap4-keypad";
+			reg = <0x4ae1c000 0x400>;
+			ti,hwmods = "kbd";
+		};
+
+		mcpdm: mcpdm@40132000 {
+			compatible = "ti,omap4-mcpdm";
+			reg = <0x40132000 0x7f>, /* MPU private access */
+			      <0x49032000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mcpdm";
+			dmas = <&sdma 65>,
+			       <&sdma 66>;
+			dma-names = "up_link", "dn_link";
+			status = "disabled";
+		};
+
+		dmic: dmic@4012e000 {
+			compatible = "ti,omap4-dmic";
+			reg = <0x4012e000 0x7f>, /* MPU private access */
+			      <0x4902e000 0x7f>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "dmic";
+			dmas = <&sdma 67>;
+			dma-names = "up_link";
+			status = "disabled";
+		};
+
+		mcbsp1: mcbsp@40122000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40122000 0xff>, /* MPU private access */
+			      <0x49022000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp1";
+			dmas = <&sdma 33>,
+			       <&sdma 34>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp2: mcbsp@40124000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40124000 0xff>, /* MPU private access */
+			      <0x49024000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp2";
+			dmas = <&sdma 17>,
+			       <&sdma 18>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mcbsp3: mcbsp@40126000 {
+			compatible = "ti,omap4-mcbsp";
+			reg = <0x40126000 0xff>, /* MPU private access */
+			      <0x49026000 0xff>; /* L3 Interconnect */
+			reg-names = "mpu", "dma";
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "common";
+			ti,buffer-size = <128>;
+			ti,hwmods = "mcbsp3";
+			dmas = <&sdma 19>,
+			       <&sdma 20>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		mailbox: mailbox@4a0f4000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x4a0f4000 0x200>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <3>;
+			ti,mbox-num-fifos = <8>;
+			mbox_ipu: mbox_ipu {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <1 0 0>;
+			};
+			mbox_dsp: mbox_dsp {
+				ti,mbox-tx = <3 0 0>;
+				ti,mbox-rx = <2 0 0>;
+			};
+		};
+
+		timer1: timer@4ae18000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4ae18000 0x80>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@40138000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x40138000 0x80>,
+			      <0x49038000 0x80>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer6: timer@4013a000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4013a000 0x80>,
+			      <0x4903a000 0x80>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4013c000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4013c000 0x80>,
+			      <0x4903c000 0x80>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4013e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4013e000 0x80>,
+			      <0x4903e000 0x80>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap5430-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		wdt2: wdt@4ae14000 {
+			compatible = "ti,omap5-wdt", "ti,omap3-wdt";
+			reg = <0x4ae14000 0x80>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		dmm@4e000000 {
+			compatible = "ti,omap5-dmm";
+			reg = <0x4e000000 0x800>;
+			interrupts = <0 113 0x4>;
+			ti,hwmods = "dmm";
+		};
+
+		emif1: emif@4c000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif1";
+			ti,no-idle-on-init;
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4c000000 0x400>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif@4d000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif2";
+			ti,no-idle-on-init;
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4d000000 0x400>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		omap_control_usb2phy: control-phy@4a002300 {
+			compatible = "ti,control-phy-usb2";
+			reg = <0x4a002300 0x4>;
+			reg-names = "power";
+		};
+
+		omap_control_usb3phy: control-phy@4a002370 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002370 0x4>;
+			reg-names = "power";
+		};
+
+		usb3: omap_dwc3@4a020000 {
+			compatible = "ti,dwc3";
+			ti,hwmods = "usb_otg_ss";
+			reg = <0x4a020000 0x10000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <2>;
+			ranges;
+			dwc3@4a030000 {
+				compatible = "snps,dwc3";
+				reg = <0x4a030000 0x10000>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				dr_mode = "peripheral";
+				tx-fifo-resize;
+			};
+		};
+
+		ocp2scp@4a080000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x4a080000 0x20>;
+			ranges;
+			ti,hwmods = "ocp2scp1";
+			usb2_phy: usb2phy@4a084000 {
+				compatible = "ti,omap-usb2";
+				reg = <0x4a084000 0x7c>;
+				ctrl-module = <&omap_control_usb2phy>;
+				clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+			};
+
+			usb3_phy: usb3phy@4a084400 {
+				compatible = "ti,omap-usb3";
+				reg = <0x4a084400 0x80>,
+				      <0x4a084800 0x64>,
+				      <0x4a084c00 0x40>;
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_usb3phy>;
+				clocks = <&usb_phy_cm_clk32k>,
+					 <&sys_clkin>,
+					 <&usb_otg_ss_refclk960m>;
+				clock-names =	"wkupclk",
+						"sysclk",
+						"refclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		usbhstll: usbhstll@4a062000 {
+			compatible = "ti,usbhs-tll";
+			reg = <0x4a062000 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "usb_tll_hs";
+		};
+
+		usbhshost: usbhshost@4a064000 {
+			compatible = "ti,usbhs-host";
+			reg = <0x4a064000 0x800>;
+			ti,hwmods = "usb_host_hs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&l3init_60m_fclk>,
+				 <&xclk60mhsp1_ck>,
+				 <&xclk60mhsp2_ck>;
+			clock-names = "refclk_60m_int",
+				      "refclk_60m_ext_p1",
+				      "refclk_60m_ext_p2";
+
+			usbhsohci: ohci@4a064800 {
+				compatible = "ti,ohci-omap3";
+				reg = <0x4a064800 0x400>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usbhsehci: ehci@4a064c00 {
+				compatible = "ti,ehci-omap";
+				reg = <0x4a064c00 0x400>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		bandgap: bandgap@4a0021e0 {
+			reg = <0x4a0021e0 0xc
+			       0x4a00232c 0xc
+			       0x4a002380 0x2c
+			       0x4a0023C0 0x3c>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			compatible = "ti,omap5430-bandgap";
+
+			#thermal-sensor-cells = <1>;
+		};
+
+		omap_control_sata: control-phy@4a002374 {
+			compatible = "ti,control-phy-pipe3";
+			reg = <0x4a002374 0x4>;
+			reg-names = "power";
+			clocks = <&sys_clkin>;
+			clock-names = "sysclk";
+		};
+
+		/* OCP2SCP3 */
+		ocp2scp@4a090000 {
+			compatible = "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x4a090000 0x20>;
+			ranges;
+			ti,hwmods = "ocp2scp3";
+			sata_phy: phy@4a096000 {
+				compatible = "ti,phy-pipe3-sata";
+				reg = <0x4A096000 0x80>, /* phy_rx */
+				      <0x4A096400 0x64>, /* phy_tx */
+				      <0x4A096800 0x40>; /* pll_ctrl */
+				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+				ctrl-module = <&omap_control_sata>;
+				clocks = <&sys_clkin>;
+				clock-names = "sysclk";
+				#phy-cells = <0>;
+			};
+		};
+
+		sata: sata@4a141100 {
+			compatible = "snps,dwc-ahci";
+			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			clocks = <&sata_ref_clk>;
+			ti,hwmods = "sata";
+		};
+
+		dss: dss@58000000 {
+			compatible = "ti,omap5-dss";
+			reg = <0x58000000 0x80>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&dss_dss_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc@58001000 {
+				compatible = "ti,omap5-dispc";
+				reg = <0x58001000 0x1000>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&dss_dss_clk>;
+				clock-names = "fck";
+			};
+
+			rfbi: encoder@58002000  {
+				compatible = "ti,omap5-rfbi";
+				reg = <0x58002000 0x100>;
+				status = "disabled";
+				ti,hwmods = "dss_rfbi";
+				clocks = <&dss_dss_clk>, <&l3_iclk_div>;
+				clock-names = "fck", "ick";
+			};
+
+			dsi1: encoder@58004000 {
+				compatible = "ti,omap5-dsi";
+				reg = <0x58004000 0x200>,
+				      <0x58004200 0x40>,
+				      <0x58004300 0x40>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi1";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			dsi2: encoder@58005000 {
+				compatible = "ti,omap5-dsi";
+				reg = <0x58009000 0x200>,
+				      <0x58009200 0x40>,
+				      <0x58009300 0x40>;
+				reg-names = "proto", "phy", "pll";
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_dsi2";
+				clocks = <&dss_dss_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+			};
+
+			hdmi: encoder@58060000 {
+				compatible = "ti,omap5-hdmi";
+				reg = <0x58040000 0x200>,
+				      <0x58040200 0x80>,
+				      <0x58040300 0x80>,
+				      <0x58060000 0x19000>;
+				reg-names = "wp", "pll", "phy", "core";
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				ti,hwmods = "dss_hdmi";
+				clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
+				clock-names = "fck", "sys_clk";
+				dmas = <&sdma 76>;
+				dma-names = "audio_tx";
+			};
+		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
+			      <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address", "ldo-address";
+			ti,tranxdone-status-mask = <0x80>;
+			/* LDOVBBMPU_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMPU_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1060000		0	0x0	0 0x02000000 0x01F00000
+			1250000		0	0x4	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_mm: regulator-abb-mm {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mm";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
+			      <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address", "ldo-address";
+			ti,tranxdone-status-mask = <0x80000000>;
+			/* LDOVBBMM_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMM_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1025000		0	0x0	0 0x02000000 0x01F00000
+			1120000		0	0x4	0 0x02000000 0x01F00000
+			>;
+		};
+	};
+};
+
+/include/ "omap54xx-clocks.dtsi"
diff --git a/src/arm/omap54xx-clocks.dtsi b/src/arm/omap54xx-clocks.dtsi
new file mode 100644
index 000000000000..58c27466f012
--- /dev/null
+++ b/src/arm/omap54xx-clocks.dtsi
@@ -0,0 +1,1357 @@
+/*
+ * Device Tree Source for OMAP5 clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&cm_core_aon_clocks {
+	pad_clks_src_ck: pad_clks_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	pad_clks_ck: pad_clks_ck {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&pad_clks_src_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0108>;
+	};
+
+	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	slimbus_src_clk: slimbus_src_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	slimbus_clk: slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_src_clk>;
+		ti,bit-shift = <10>;
+		reg = <0x0108>;
+	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_12000000_ck: virt_12000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+	virt_13000000_ck: virt_13000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+	};
+
+	virt_16800000_ck: virt_16800000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16800000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	virt_27000000_ck: virt_27000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+	};
+
+	virt_38400000_ck: virt_38400000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <38400000>;
+	};
+
+	xclk60mhsp1_ck: xclk60mhsp1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	xclk60mhsp2_ck: xclk60mhsp2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <60000000>;
+	};
+
+	dpll_abe_ck: dpll_abe_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-m4xen-clock";
+		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
+		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
+	};
+
+	dpll_abe_x2_ck: dpll_abe_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_abe_ck>;
+	};
+
+	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f0>;
+		ti,index-starts-at-one;
+	};
+
+	abe_24m_fclk: abe_24m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	abe_clk: abe_clk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		ti,max-div = <4>;
+		reg = <0x0108>;
+		ti,index-power-of-two;
+	};
+
+	abe_iclk: abe_iclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&aess_fclk>;
+		ti,bit-shift = <24>;
+		reg = <0x0528>;
+		ti,dividers = <2>, <1>;
+	};
+
+	abe_lp_clk_div: abe_lp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_abe_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x01f4>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-core-clock";
+		clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
+		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_h21x2_ck: dpll_core_h21x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	c2c_fclk: c2c_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h21x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	c2c_iclk: c2c_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&c2c_fclk>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_core_h11x2_ck: dpll_core_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0138>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x013c>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0140>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0144>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m2_ck: dpll_core_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_ck>;
+		ti,max-div = <31>;
+		reg = <0x0130>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_core_m3x2_ck: dpll_core_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0134>;
+		ti,index-starts-at-one;
+	};
+
+	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_iva_ck: dpll_iva_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
+		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+	};
+
+	dpll_iva_x2_ck: dpll_iva_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_iva_ck>;
+	};
+
+	dpll_iva_h11x2_ck: dpll_iva_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x01b8>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_iva_h12x2_ck: dpll_iva_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_iva_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x01bc>;
+		ti,index-starts-at-one;
+	};
+
+	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_h12x2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap5-mpu-dpll-clock";
+		clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
+		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		reg = <0x0170>;
+		ti,index-starts-at-one;
+	};
+
+	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_abe_m3x2_ck>;
+		clock-mult = <1>;
+		clock-div = <3>;
+	};
+
+	l3_iclk_div: l3_iclk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <4>;
+		reg = <0x100>;
+		clocks = <&dpll_core_h12x2_ck>;
+		ti,index-power-of-two;
+	};
+
+	gpu_l3_iclk: gpu_l3_iclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&l3_iclk_div>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4_root_clk_div: l4_root_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		ti,max-div = <2>;
+		ti,bit-shift = <8>;
+		reg = <0x100>;
+		clocks = <&l3_iclk_div>;
+		ti,index-power-of-two;
+	};
+
+	slimbus1_slimbus_clk: slimbus1_slimbus_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&slimbus_clk>;
+		ti,bit-shift = <11>;
+		reg = <0x0560>;
+	};
+
+	aess_fclk: aess_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&abe_clk>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x0528>;
+	};
+
+	dmic_sync_mux_ck: dmic_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0538>;
+	};
+
+	dmic_gfclk: dmic_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0538>;
+	};
+
+	mcasp_sync_mux_ck: mcasp_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0540>;
+	};
+
+	mcasp_gfclk: mcasp_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0540>;
+	};
+
+	mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0548>;
+	};
+
+	mcbsp1_gfclk: mcbsp1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0548>;
+	};
+
+	mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0550>;
+	};
+
+	mcbsp2_gfclk: mcbsp2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0550>;
+	};
+
+	mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
+		ti,bit-shift = <26>;
+		reg = <0x0558>;
+	};
+
+	mcbsp3_gfclk: mcbsp3_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
+		ti,bit-shift = <24>;
+		reg = <0x0558>;
+	};
+
+	timer5_gfclk_mux: timer5_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0568>;
+	};
+
+	timer6_gfclk_mux: timer6_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0570>;
+	};
+
+	timer7_gfclk_mux: timer7_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0578>;
+	};
+
+	timer8_gfclk_mux: timer8_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x0580>;
+	};
+
+	dummy_ck: dummy_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+};
+&prm_clocks {
+	sys_clkin: sys_clkin {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
+		reg = <0x0110>;
+		ti,index-starts-at-one;
+	};
+
+	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x0108>;
+	};
+
+	abe_dpll_clk_mux: abe_dpll_clk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		reg = <0x010c>;
+	};
+
+	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dss_syc_gfclk_div: dss_syc_gfclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	wkupaon_iclk_mux: wkupaon_iclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&abe_lp_clk_div>;
+		reg = <0x0108>;
+	};
+
+	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&wkupaon_iclk_mux>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1938>;
+	};
+
+	timer1_gfclk_mux: timer1_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1940>;
+	};
+};
+&cm_core_clocks {
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
+		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
+	};
+
+	dpll_per_x2_ck: dpll_per_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-x2-clock";
+		clocks = <&dpll_per_ck>;
+	};
+
+	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0158>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x015c>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x0164>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0150>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_per_m3x2_ck: dpll_per_m3x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_x2_ck>;
+		ti,max-div = <31>;
+		reg = <0x0154>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_unipro1_ck: dpll_unipro1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
+	};
+
+	dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro1_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro1_m2_ck: dpll_unipro1_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro1_ck>;
+		ti,max-div = <127>;
+		reg = <0x0210>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_unipro2_ck: dpll_unipro2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-clock";
+		clocks = <&sys_clkin>, <&sys_clkin>;
+		reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
+	};
+
+	dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_unipro2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_unipro2_m2_ck: dpll_unipro2_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_unipro2_ck>;
+		ti,max-div = <127>;
+		reg = <0x01d0>;
+		ti,index-starts-at-one;
+	};
+
+	dpll_usb_ck: dpll_usb_ck {
+		#clock-cells = <0>;
+		compatible = "ti,omap4-dpll-j-type-clock";
+		clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
+		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
+	};
+
+	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_usb_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_usb_m2_ck: dpll_usb_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_ck>;
+		ti,max-div = <127>;
+		reg = <0x0190>;
+		ti,index-starts-at-one;
+	};
+
+	func_128m_clk: func_128m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	func_12m_fclk: func_12m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	func_24m_clk: func_24m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_48m_fclk: func_48m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	func_96m_fclk: func_96m_fclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_60m_fclk: l3init_60m_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		reg = <0x0104>;
+		ti,dividers = <1>, <8>;
+	};
+
+	dss_32khz_clk: dss_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <11>;
+		reg = <0x1420>;
+	};
+
+	dss_48mhz_clk: dss_48mhz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_48m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1420>;
+	};
+
+	dss_dss_clk: dss_dss_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_h12x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1420>;
+		ti,set-rate-parent;
+	};
+
+	dss_sys_clk: dss_sys_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dss_syc_gfclk_div>;
+		ti,bit-shift = <10>;
+		reg = <0x1420>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1060>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1068>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1070>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1078>;
+	};
+
+	gpio6_dbclk: gpio6_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1080>;
+	};
+
+	gpio7_dbclk: gpio7_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1110>;
+	};
+
+	gpio8_dbclk: gpio8_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1118>;
+	};
+
+	iss_ctrlclk: iss_ctrlclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&func_96m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1320>;
+	};
+
+	lli_txphy_clk: lli_txphy_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x0f20>;
+	};
+
+	lli_txphy_ls_clk: lli_txphy_ls_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_unipro1_m2_ck>;
+		ti,bit-shift = <9>;
+		reg = <0x0f20>;
+	};
+
+	mmc1_32khz_clk: mmc1_32khz_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x1628>;
+	};
+
+	sata_ref_clk: sata_ref_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_clkin>;
+		ti,bit-shift = <8>;
+		reg = <0x1688>;
+	};
+
+	usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <13>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <14>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_m2_ck>;
+		ti,bit-shift = <7>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <11>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <12>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <6>;
+		reg = <0x1658>;
+	};
+
+	utmi_p1_gfclk: utmi_p1_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3init_60m_fclk>, <&xclk60mhsp1_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p1_gfclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1658>;
+	};
+
+	utmi_p2_gfclk: utmi_p2_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&l3init_60m_fclk>, <&xclk60mhsp2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&utmi_p2_gfclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1658>;
+	};
+
+	usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1658>;
+	};
+
+	usb_otg_ss_refclk960m: usb_otg_ss_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x16f0>;
+	};
+
+	usb_phy_cm_clk32k: usb_phy_cm_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&sys_32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0640>;
+	};
+
+	usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <8>;
+		reg = <0x1668>;
+	};
+
+	usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <9>;
+		reg = <0x1668>;
+	};
+
+	usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l3init_60m_fclk>;
+		ti,bit-shift = <10>;
+		reg = <0x1668>;
+	};
+
+	fdif_fclk: fdif_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_h11x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1328>;
+	};
+
+	gpu_core_gclk_mux: gpu_core_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1520>;
+	};
+
+	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
+		ti,bit-shift = <25>;
+		reg = <0x1520>;
+	};
+
+	hsi_fclk: hsi_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		ti,max-div = <2>;
+		reg = <0x1638>;
+	};
+
+	mmc1_fclk_mux: mmc1_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1628>;
+	};
+
+	mmc1_fclk: mmc1_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc1_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <2>;
+		reg = <0x1628>;
+	};
+
+	mmc2_fclk_mux: mmc2_fclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1630>;
+	};
+
+	mmc2_fclk: mmc2_fclk {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&mmc2_fclk_mux>;
+		ti,bit-shift = <25>;
+		ti,max-div = <2>;
+		reg = <0x1630>;
+	};
+
+	timer10_gfclk_mux: timer10_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1028>;
+	};
+
+	timer11_gfclk_mux: timer11_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1030>;
+	};
+
+	timer2_gfclk_mux: timer2_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1038>;
+	};
+
+	timer3_gfclk_mux: timer3_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1040>;
+	};
+
+	timer4_gfclk_mux: timer4_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1048>;
+	};
+
+	timer9_gfclk_mux: timer9_gfclk_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin>, <&sys_32k_ck>;
+		ti,bit-shift = <24>;
+		reg = <0x1050>;
+	};
+};
+
+&cm_core_clockdomains {
+	l3init_clkdm: l3init_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dpll_usb_ck>;
+	};
+};
+
+&scrm_clocks {
+	auxclk0_src_gate_ck: auxclk0_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_mux_ck: auxclk0_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0310>;
+	};
+
+	auxclk0_src_ck: auxclk0_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
+	};
+
+	auxclk0_ck: auxclk0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk0_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0310>;
+	};
+
+	auxclk1_src_gate_ck: auxclk1_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_mux_ck: auxclk1_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0314>;
+	};
+
+	auxclk1_src_ck: auxclk1_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
+	};
+
+	auxclk1_ck: auxclk1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk1_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0314>;
+	};
+
+	auxclk2_src_gate_ck: auxclk2_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_mux_ck: auxclk2_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0318>;
+	};
+
+	auxclk2_src_ck: auxclk2_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
+	};
+
+	auxclk2_ck: auxclk2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk2_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0318>;
+	};
+
+	auxclk3_src_gate_ck: auxclk3_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_mux_ck: auxclk3_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x031c>;
+	};
+
+	auxclk3_src_ck: auxclk3_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
+	};
+
+	auxclk3_ck: auxclk3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk3_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x031c>;
+	};
+
+	auxclk4_src_gate_ck: auxclk4_src_gate_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-no-wait-gate-clock";
+		clocks = <&dpll_core_m3x2_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_mux_ck: auxclk4_src_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-mux-clock";
+		clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x0320>;
+	};
+
+	auxclk4_src_ck: auxclk4_src_ck {
+		#clock-cells = <0>;
+		compatible = "ti,composite-clock";
+		clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
+	};
+
+	auxclk4_ck: auxclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&auxclk4_src_ck>;
+		ti,bit-shift = <16>;
+		ti,max-div = <16>;
+		reg = <0x0320>;
+	};
+
+	auxclkreq0_ck: auxclkreq0_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0210>;
+	};
+
+	auxclkreq1_ck: auxclkreq1_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0214>;
+	};
+
+	auxclkreq2_ck: auxclkreq2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x0218>;
+	};
+
+	auxclkreq3_ck: auxclkreq3_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
+		ti,bit-shift = <2>;
+		reg = <0x021c>;
+	};
+};
diff --git a/src/arm/orion5x-lacie-d2-network.dts b/src/arm/orion5x-lacie-d2-network.dts
new file mode 100644
index 000000000000..c701e8d16bbb
--- /dev/null
+++ b/src/arm/orion5x-lacie-d2-network.dts
@@ -0,0 +1,236 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "LaCie d2 Network";
+	compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		front_button {
+			label = "Front Push Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rocker_sw_on {
+			label = "Power rocker switch (on|auto)";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rocker_sw_off {
+			label = "Power rocker switch (auto|off)";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
+			gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+                #address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full512Kb";
+			reg = <0 0x80000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372b";
+		reg = <0x32>;
+	};
+
+	fan@3e {
+		compatible = "gmt,g762";
+		reg = <0x3e>;
+
+		/* Not enough HW info */
+		status = "disabled";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
+	pinctrl-names = "default";
+
+	pmx_board_id: pmx-board-id {
+		marvell,pins = "mpp0", "mpp1", "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp8", "mpp9", "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_fan_fail: pmx-fan-fail {
+		marvell,pins = "mpp5";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP6: Red front LED
+	 * MPP16: Blue front LED blink control
+	 */
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp6", "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_led_active: pmx-sata0-led-active {
+		marvell,pins = "mpp14";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata0_power: pmx-sata0-power {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_led_active: pmx-sata1-led-active {
+		marvell,pins = "mpp15";
+		marvell,function = "sata1";
+	};
+
+	pmx_sata1_power: pmx-sata1-power {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * Non MPP GPIOs:
+	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+	 *  GPIO 23: Blue front LED off
+	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+	 */
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0_led_active
+		     &pmx_sata1_led_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts b/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts
new file mode 100644
index 000000000000..89ff404a528c
--- /dev/null
+++ b/src/arm/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -0,0 +1,174 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * TODO: add Orion USB device port init when kernel.org support is added.
+ * TODO: add flash write support: see below.
+ * TODO: add power-off support.
+ * TODO: add I2C EEPROM support.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "LaCie Ethernet Disk mini V2";
+	compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_power_button>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@1 {
+			label = "Power-on Switch";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_power_led>;
+		pinctrl-names = "default";
+
+		led@1 {
+			label = "power:blue";
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full512Kb";
+			reg = <0 0x80000>;
+			read-only;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>;
+	pinctrl-names = "default";
+
+	pmx_power_button: pmx-power-button {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led: pmx-power-led {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_power_led_ctrl: pmx-power-led-ctrl {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/orion5x-maxtor-shared-storage-2.dts b/src/arm/orion5x-maxtor-shared-storage-2.dts
new file mode 100644
index 000000000000..ff3484904294
--- /dev/null
+++ b/src/arm/orion5x-maxtor-shared-storage-2.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Maxtor Shared Storage II";
+	compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	/*
+	 * Currently the MTD code does not recognize the MX29LV400CBCT
+	 * as a bottom-type device. This could cause risks of
+	 * accidentally erasing critical flash sectors. We thus define
+	 * a single, write-protected partition covering the whole
+	 * flash.  TODO: once the flash part TOP/BOTTOM detection
+	 * issue is sorted out in the MTD code, break this into at
+	 * least three partitions: 'u-boot code', 'u-boot environment'
+	 * and 'whatever is left'.
+	 */
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+                #address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+		pinctrl-0 = <&pmx_rtc>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio0>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_leds &pmx_misc>;
+	pinctrl-names = "default";
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp11", "mpp12";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP0: Power LED
+	 * MPP1: Error LED
+	 */
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp0", "mpp1";
+		marvell,function = "gpio";
+	};
+
+	/*
+	 * MPP4: HDD ind. (Single/Dual)
+	 * MPP5: HD0 5V control
+	 * MPP6: HD0 12V control
+	 * MPP7: HD1 5V control
+	 * MPP8: HD1 12V control
+	 */
+	pmx_misc: pmx-misc {
+		marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_led_active: pmx-sata0-led-active {
+		marvell,pins = "mpp14";
+		marvell,function = "sata0";
+	};
+
+	pmx_sata1_led_active: pmx-sata1-led-active {
+		marvell,pins = "mpp15";
+		marvell,function = "sata1";
+	};
+
+	/*
+	 * Non MPP GPIOs:
+	 *  GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
+	 *  GPIO 23: Blue front LED off
+	 *  GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
+	 */
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0_led_active
+		     &pmx_sata1_led_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/orion5x-mv88f5182.dtsi b/src/arm/orion5x-mv88f5182.dtsi
new file mode 100644
index 000000000000..d1ed71c60209
--- /dev/null
+++ b/src/arm/orion5x-mv88f5182.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "orion5x.dtsi"
+
+/ {
+	compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	soc {
+		compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
+
+		internal-regs {
+			pinctrl: pinctrl@10000 {
+				compatible = "marvell,88f5182-pinctrl";
+				reg = <0x10000 0x8>, <0x10050 0x4>;
+
+				pmx_sata0: pmx-sata0 {
+					marvell,pins = "mpp12", "mpp14";
+					marvell,function = "sata0";
+				};
+
+				pmx_sata1: pmx-sata1 {
+					marvell,pins = "mpp13", "mpp15";
+					marvell,function = "sata1";
+				};
+			};
+
+			core_clk: core-clocks@10030 {
+				compatible = "marvell,mv88f5182-core-clock";
+				reg = <0x10010 0x4>;
+				#clock-cells = <1>;
+			};
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x1500 0x20>;
+			};
+		};
+	};
+};
diff --git a/src/arm/orion5x-rd88f5182-nas.dts b/src/arm/orion5x-rd88f5182-nas.dts
new file mode 100644
index 000000000000..6fb052507b36
--- /dev/null
+++ b/src/arm/orion5x-rd88f5182-nas.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Marvell Reference Design 88F5182 NAS";
+	compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x4000000>; /* 64 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+		         <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
+			 <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_debug_led>;
+		pinctrl-names = "default";
+
+		led@0 {
+			label = "rd88f5182:cpu";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x80000>;
+		bank-width = <1>;
+	};
+};
+
+&devbus_cs1 {
+	status = "okay";
+
+	/* Read parameters */
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <90000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <186000>;
+	devbus,acc-next-ps  = <186000>;
+
+	/* Write parameters */
+	devbus,wr-high-ps  = <90000>;
+	devbus,wr-low-ps   = <90000>;
+	devbus,ale-wr-ps   = <90000>;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x1000000>;
+		bank-width = <1>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@68 {
+		pinctrl-0 = <&pmx_rtc>;
+		pinctrl-names = "default";
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
+		&pmx_pci_gpios>;
+	pinctrl-names = "default";
+
+	/*
+	 * MPP[20] PCI Clock to MV88F5182
+	 * MPP[21] PCI Clock to mini PCI CON11
+	 * MPP[22] USB 0 over current indication
+	 * MPP[23] USB 1 over current indication
+	 * MPP[24] USB 1 over current enable
+	 * MPP[25] USB 0 over current enable
+	 */
+
+	pmx_debug_led: pmx-debug_led {
+		marvell,pins = "mpp0";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_switch: pmx-reset-switch {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_rtc: pmx-rtc {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_misc_gpios: pmx-misc-gpios {
+		marvell,pins = "mpp4", "mpp5";
+		marvell,function = "gpio";
+	};
+
+	pmx_pci_gpios: pmx-pci-gpios {
+		marvell,pins = "mpp6", "mpp7";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+	pinctrl-names = "default";
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/orion5x.dtsi b/src/arm/orion5x.dtsi
new file mode 100644
index 000000000000..75cd01bd6024
--- /dev/null
+++ b/src/arm/orion5x.dtsi
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "skeleton.dtsi"
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+/ {
+	model = "Marvell Orion5x SoC";
+	compatible = "marvell,orion5x";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		gpio0 = &gpio0;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+
+		devbus_bootcs: devbus-bootcs {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs0: devbus-cs0 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs1: devbus-cs1 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		devbus_cs2: devbus-cs2 {
+			compatible = "marvell,orion-devbus";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
+			ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&core_clk 0>;
+			status = "disabled";
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			gpio0: gpio@10100 {
+				compatible = "marvell,orion-gpio";
+				#gpio-cells = <2>;
+				gpio-controller;
+				reg = <0x10100 0x40>;
+				ngpios = <32>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <6>, <7>, <8>, <9>;
+			};
+
+			spi: spi@10600 {
+				compatible = "marvell,orion-spi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				reg = <0x10600 0x28>;
+				status = "disabled";
+			};
+
+			i2c: i2c@11000 {
+				compatible = "marvell,mv64xxx-i2c";
+				reg = <0x11000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <5>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart0: serial@12000 {
+				compatible = "ns16550a";
+				reg = <0x12000 0x100>;
+				reg-shift = <2>;
+				interrupts = <3>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			uart1: serial@12100 {
+				compatible = "ns16550a";
+				reg = <0x12100 0x100>;
+				reg-shift = <2>;
+				interrupts = <4>;
+				clocks = <&core_clk 0>;
+				status = "disabled";
+			};
+
+			bridge_intc: bridge-interrupt-ctrl@20110 {
+				compatible = "marvell,orion-bridge-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20110 0x8>;
+				interrupts = <0>;
+				marvell,#interrupts = <4>;
+			};
+
+			intc: interrupt-controller@20200 {
+				compatible = "marvell,orion-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0x20200 0x08>;
+			};
+
+			timer: timer@20300 {
+				compatible = "marvell,orion-timer";
+				reg = <0x20300 0x20>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <1>, <2>;
+				clocks = <&core_clk 0>;
+			};
+
+			wdt: wdt@20300 {
+				compatible = "marvell,orion-wdt";
+				reg = <0x20300 0x28>;
+				interrupt-parent = <&bridge_intc>;
+				interrupts = <3>;
+				status = "okay";
+			};
+
+			ehci0: ehci@50000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0x50000 0x1000>;
+				interrupts = <17>;
+				status = "disabled";
+			};
+
+			xor: dma-controller@60900 {
+				compatible = "marvell,orion-xor";
+				reg = <0x60900 0x100
+				       0x60b00 0x100>;
+				status = "okay";
+
+				xor00 {
+				      interrupts = <30>;
+				      dmacap,memcpy;
+				      dmacap,xor;
+				};
+				xor01 {
+				      interrupts = <31>;
+				      dmacap,memcpy;
+				      dmacap,xor;
+				      dmacap,memset;
+				};
+			};
+
+			eth: ethernet-controller@72000 {
+				compatible = "marvell,orion-eth";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72000 0x4000>;
+				marvell,tx-checksum-limit = <1600>;
+				status = "disabled";
+
+				ethport: ethernet-port@0 {
+					compatible = "marvell,orion-eth-port";
+					reg = <0>;
+					interrupts = <21>;
+					/* overwrite MAC address in bootloader */
+					local-mac-address = [00 00 00 00 00 00];
+					/* set phy-handle property in board file */
+				};
+			};
+
+			mdio: mdio-bus@72004 {
+				compatible = "marvell,orion-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72004 0x84>;
+				interrupts = <22>;
+				status = "disabled";
+
+				/* add phy nodes in board file */
+			};
+
+			sata: sata@80000 {
+				compatible = "marvell,orion-sata";
+				reg = <0x80000 0x5000>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			ehci1: ehci@a0000 {
+				compatible = "marvell,orion-ehci";
+				reg = <0xa0000 0x1000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
+		};
+
+		cesa: crypto@90000 {
+			compatible = "marvell,orion-crypto";
+			reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
+			      <MBUS_ID(0x09, 0x00) 0x0 0x800>;
+			reg-names = "regs", "sram";
+			interrupts = <28>;
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/phy3250.dts b/src/arm/phy3250.dts
new file mode 100644
index 000000000000..90fdbd77f274
--- /dev/null
+++ b/src/arm/phy3250.dts
@@ -0,0 +1,202 @@
+/*
+ * PHYTEC phyCORE-LPC3250 board
+ *
+ * Copyright 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "lpc32xx.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-LPC3250 board based on NXP LPC3250";
+	compatible = "phytec,phy3250", "nxp,lpc3250";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x4000000>;
+	};
+
+	ahb {
+		mac: ethernet@31060000 {
+			phy-mode = "rmii";
+			use-iram;
+		};
+
+		/* Here, choose exactly one from: ohci, usbd */
+		ohci@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+
+/*
+		usbd@31020000 {
+			transceiver = <&isp1301>;
+			status = "okay";
+		};
+*/
+
+		clcd@31040000 {
+			status = "okay";
+		};
+
+		/* 64MB Flash via SLC NAND controller */
+		slc: flash@20020000 {
+			status = "okay";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nxp,wdr-clks = <14>;
+			nxp,wwidth = <40000000>;
+			nxp,whold = <100000000>;
+			nxp,wsetup = <100000000>;
+			nxp,rdr-clks = <14>;
+			nxp,rwidth = <40000000>;
+			nxp,rhold = <66666666>;
+			nxp,rsetup = <100000000>;
+			nand-on-flash-bbt;
+			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
+
+			mtd0@00000000 {
+				label = "phy3250-boot";
+				reg = <0x00000000 0x00064000>;
+				read-only;
+			};
+
+			mtd1@00064000 {
+				label = "phy3250-uboot";
+				reg = <0x00064000 0x00190000>;
+				read-only;
+			};
+
+			mtd2@001f4000 {
+				label = "phy3250-ubt-prms";
+				reg = <0x001f4000 0x00010000>;
+			};
+
+			mtd3@00204000 {
+				label = "phy3250-kernel";
+				reg = <0x00204000 0x00400000>;
+			};
+
+			mtd4@00604000 {
+				label = "phy3250-rootfs";
+				reg = <0x00604000 0x039fc000>;
+			};
+		};
+
+		apb {
+			uart5: serial@40090000 {
+				status = "okay";
+			};
+
+			uart3: serial@40080000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@400A0000 {
+				clock-frequency = <100000>;
+
+				pcf8563: rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+				uda1380: uda1380@18 {
+					compatible = "nxp,uda1380";
+					reg = <0x18>;
+					power-gpio = <&gpio 0x59 0>;
+					reset-gpio = <&gpio 0x51 0>;
+					dac-clk = "wspll";
+				};
+			};
+
+			i2c2: i2c@400A8000 {
+				clock-frequency = <100000>;
+			};
+
+			i2cusb: i2c@31020300 {
+				clock-frequency = <100000>;
+
+				isp1301: usb-transceiver@2c {
+					compatible = "nxp,isp1301";
+					reg = <0x2c>;
+				};
+			};
+
+			ssp0: ssp@20084000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				num-cs = <1>;
+				cs-gpios = <&gpio 3 5 0>;
+
+				eeprom: at25@0 {
+					pl022,interface = <0>;
+					pl022,com-mode = <0>;
+					pl022,rx-level-trig = <1>;
+					pl022,tx-level-trig = <1>;
+					pl022,ctrl-len = <11>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+
+					at25,byte-len = <0x8000>;
+					at25,addr-mode = <2>;
+					at25,page-size = <64>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <5000000>;
+				};
+			};
+
+			sd@20098000 {
+				wp-gpios = <&gpio 3 0 0>;
+				cd-gpios = <&gpio 3 1 0>;
+				cd-inverted;
+				bus-width = <4>;
+				status = "okay";
+			};
+		};
+
+		fab {
+			uart2: serial@40018000 {
+				status = "okay";
+			};
+
+			tsc@40048000 {
+				status = "okay";
+			};
+
+			key@40050000 {
+				status = "okay";
+				keypad,num-rows = <1>;
+				keypad,num-columns = <1>;
+				nxp,debounce-delay-ms = <3>;
+				nxp,scan-delay-ms = <34>;
+				linux,keymap = <0x00000002>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 { /* red */
+			gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */
+			default-state = "off";
+		};
+
+		led1 { /* green */
+			gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/src/arm/picoxcell-pc3x2.dtsi b/src/arm/picoxcell-pc3x2.dtsi
new file mode 100644
index 000000000000..533919e96eae
--- /dev/null
+++ b/src/arm/picoxcell-pc3x2.dtsi
@@ -0,0 +1,249 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+	model = "Picochip picoXcell PC3X2";
+	compatible = "picochip,pc3x2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1176jz-s";
+			device_type = "cpu";
+			clock-frequency = <400000000>;
+			d-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <32>;
+			i-cache-size = <32768>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pclk: clock@0 {
+			compatible = "fixed-clock";
+			clock-outputs = "bus", "pclk";
+			clock-frequency = <200000000>;
+			ref-clock = <&ref_clk>, "ref";
+		};
+	};
+
+	paxi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80000000 0x400000>;
+
+		emac: gem@30000 {
+			compatible = "cadence,gem";
+			reg = <0x30000 0x10000>;
+			interrupts = <31>;
+		};
+
+		dmac1: dmac@40000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x40000 0x10000>;
+			interrupts = <25>;
+		};
+
+		dmac2: dmac@50000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x50000 0x10000>;
+			interrupts = <26>;
+		};
+
+		vic0: interrupt-controller@60000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x60000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@64000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x64000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fuse: picoxcell-fuse@80000 {
+			compatible = "picoxcell,fuse-pc3x2";
+			reg = <0x80000 0x10000>;
+		};
+
+		ssi: picoxcell-spi@90000 {
+			compatible = "picoxcell,spi";
+			reg = <0x90000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <10>;
+		};
+
+		ipsec: spacc@100000 {
+			compatible = "picochip,spacc-ipsec";
+			reg = <0x100000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <24>;
+			ref-clock = <&pclk>, "ref";
+		};
+
+		srtp: spacc@140000 {
+			compatible = "picochip,spacc-srtp";
+			reg = <0x140000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>;
+		};
+
+		l2_engine: spacc@180000 {
+			compatible = "picochip,spacc-l2";
+			reg = <0x180000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <22>;
+			ref-clock = <&pclk>, "ref";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x80000>;
+
+			rtc0: rtc@00000 {
+				compatible = "picochip,pc3x2-rtc";
+				clock-freq = <200000000>;
+				reg = <0x00000 0xf>;
+				interrupt-parent = <&vic1>;
+				interrupts = <8>;
+			};
+
+			timer0: timer@10000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <4>;
+				clock-freq = <200000000>;
+				reg = <0x10000 0x14>;
+			};
+
+			timer1: timer@10014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <5>;
+				clock-freq = <200000000>;
+				reg = <0x10014 0x14>;
+			};
+
+			timer2: timer@10028 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <6>;
+				clock-freq = <200000000>;
+				reg = <0x10028 0x14>;
+			};
+
+			timer3: timer@1003c {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <7>;
+				clock-freq = <200000000>;
+				reg = <0x1003c 0x14>;
+			};
+
+			gpio: gpio@20000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x20000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg-io-width = <4>;
+
+				banka: gpio-controller@0 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x50>;
+					regoffset-set = <0x00>;
+					regoffset-dirout = <0x04>;
+				};
+
+				bankb: gpio-controller@1 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x54>;
+					regoffset-set = <0x0c>;
+					regoffset-dirout = <0x10>;
+				};
+			};
+
+			uart0: uart@30000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x30000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <10>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			uart1: uart@40000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x40000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <9>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			wdog: watchdog@50000 {
+				compatible = "snps,dw-apb-wdg";
+				reg = <0x50000 0x10000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <11>;
+				bus-clock = <&pclk>, "bus";
+			};
+		};
+	};
+
+	rwid-axi {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		ebi@50000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x08000000
+				  1 0 0x48000000 0x08000000
+				  2 0 0x50000000 0x08000000
+				  3 0 0x58000000 0x08000000>;
+		};
+
+		axi2pico@c0000000 {
+			compatible = "picochip,axi2pico-pc3x2";
+			reg = <0xc0000000 0x10000>;
+			interrupts = <13 14 15 16 17 18 19 20 21>;
+		};
+	};
+};
diff --git a/src/arm/picoxcell-pc3x3.dtsi b/src/arm/picoxcell-pc3x3.dtsi
new file mode 100644
index 000000000000..ab3e80085511
--- /dev/null
+++ b/src/arm/picoxcell-pc3x3.dtsi
@@ -0,0 +1,365 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+/ {
+	model = "Picochip picoXcell PC3X3";
+	compatible = "picochip,pc3x3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm1176jz-s";
+			device_type = "cpu";
+			cpu-clock = <&arm_clk>, "cpu";
+			d-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <32>;
+			i-cache-size = <32768>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clkgate: clkgate@800a0048 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x800a0048 4>;
+			compatible = "picochip,pc3x3-clk-gate";
+
+			tzprot_clk: clock@0 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <0>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			spi_clk: clock@1 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <1>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			dmac0_clk: clock@2 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <2>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			dmac1_clk: clock@3 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <3>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			ebi_clk: clock@4 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <4>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			ipsec_clk: clock@5 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <5>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			l2_clk: clock@6 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <6>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			trng_clk: clock@7 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <7>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			fuse_clk: clock@8 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <8>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+
+			otp_clk: clock@9 {
+				compatible = "picochip,pc3x3-gated-clk";
+				clock-outputs = "bus";
+				picochip,clk-disable-bit = <9>;
+				clock-frequency = <200000000>;
+				ref-clock = <&ref_clk>, "ref";
+			};
+		};
+
+		arm_clk: clock@11 {
+			compatible = "picochip,pc3x3-pll";
+			reg = <0x800a0050 0x8>;
+			picochip,min-freq = <140000000>;
+			picochip,max-freq = <700000000>;
+			ref-clock = <&ref_clk>, "ref";
+			clock-outputs = "cpu";
+		};
+
+		pclk: clock@12 {
+			compatible = "fixed-clock";
+			clock-outputs = "bus", "pclk";
+			clock-frequency = <200000000>;
+			ref-clock = <&ref_clk>, "ref";
+		};
+	};
+
+	paxi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80000000 0x400000>;
+
+		emac: gem@30000 {
+			compatible = "cadence,gem";
+			reg = <0x30000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <31>;
+		};
+
+		dmac1: dmac@40000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x40000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <25>;
+		};
+
+		dmac2: dmac@50000 {
+			compatible = "snps,dw-dmac";
+			reg = <0x50000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+		};
+
+		vic0: interrupt-controller@60000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x60000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@64000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x64000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fuse: picoxcell-fuse@80000 {
+			compatible = "picoxcell,fuse-pc3x3";
+			reg = <0x80000 0x10000>;
+		};
+
+		ssi: picoxcell-spi@90000 {
+			compatible = "picoxcell,spi";
+			reg = <0x90000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <10>;
+		};
+
+		ipsec: spacc@100000 {
+			compatible = "picochip,spacc-ipsec";
+			reg = <0x100000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <24>;
+			ref-clock = <&ipsec_clk>, "ref";
+		};
+
+		srtp: spacc@140000 {
+			compatible = "picochip,spacc-srtp";
+			reg = <0x140000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>;
+		};
+
+		l2_engine: spacc@180000 {
+			compatible = "picochip,spacc-l2";
+			reg = <0x180000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <22>;
+			ref-clock = <&l2_clk>, "ref";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x200000 0x80000>;
+
+			rtc0: rtc@00000 {
+				compatible = "picochip,pc3x2-rtc";
+				clock-freq = <200000000>;
+				reg = <0x00000 0xf>;
+				interrupt-parent = <&vic0>;
+				interrupts = <8>;
+			};
+
+			timer0: timer@10000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <4>;
+				clock-freq = <200000000>;
+				reg = <0x10000 0x14>;
+			};
+
+			timer1: timer@10014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <5>;
+				clock-freq = <200000000>;
+				reg = <0x10014 0x14>;
+			};
+
+			gpio: gpio@20000 {
+				compatible = "snps,dw-apb-gpio";
+				reg = <0x20000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg-io-width = <4>;
+
+				banka: gpio-controller@0 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <8>;
+
+					regoffset-dat = <0x50>;
+					regoffset-set = <0x00>;
+					regoffset-dirout = <0x04>;
+				};
+
+				bankb: gpio-controller@1 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <16>;
+
+					regoffset-dat = <0x54>;
+					regoffset-set = <0x0c>;
+					regoffset-dirout = <0x10>;
+				};
+
+				bankd: gpio-controller@2 {
+					compatible = "snps,dw-apb-gpio-bank";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-generic,nr-gpio = <30>;
+
+					regoffset-dat = <0x5c>;
+					regoffset-set = <0x24>;
+					regoffset-dirout = <0x28>;
+				};
+			};
+
+			uart0: uart@30000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x30000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <10>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			uart1: uart@40000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x40000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <9>;
+				clock-frequency = <3686400>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+			};
+
+			wdog: watchdog@50000 {
+				compatible = "snps,dw-apb-wdg";
+				reg = <0x50000 0x10000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <11>;
+				bus-clock = <&pclk>, "bus";
+			};
+
+			timer2: timer@60000 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <6>;
+				clock-freq = <200000000>;
+				reg = <0x60000 0x14>;
+			};
+
+			timer3: timer@60014 {
+				compatible = "picochip,pc3x2-timer";
+				interrupt-parent = <&vic0>;
+				interrupts = <7>;
+				clock-freq = <200000000>;
+				reg = <0x60014 0x14>;
+			};
+		};
+	};
+
+	rwid-axi {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		ebi@50000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x08000000
+				  1 0 0x48000000 0x08000000
+				  2 0 0x50000000 0x08000000
+				  3 0 0x58000000 0x08000000>;
+		};
+
+		axi2pico@c0000000 {
+			compatible = "picochip,axi2pico-pc3x3";
+			reg = <0xc0000000 0x10000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <13 14 15 16 17 18 19 20 21>;
+		};
+
+		otp@ffff8000 {
+			compatible = "picochip,otp-pc3x3";
+			reg = <0xffff8000 0x8000>;
+		};
+	};
+};
diff --git a/src/arm/picoxcell-pc7302-pc3x2.dts b/src/arm/picoxcell-pc7302-pc3x2.dts
new file mode 100644
index 000000000000..1297414dd649
--- /dev/null
+++ b/src/arm/picoxcell-pc7302-pc3x2.dts
@@ -0,0 +1,86 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x2.dtsi"
+/ {
+	model = "Picochip PC7302 (PC3X2)";
+	compatible = "picochip,pc7302-pc3x2", "picochip,pc3x2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	chosen {
+		linux,stdout-path = &uart0;
+	};
+
+	clocks {
+		ref_clk: clock@1 {
+			compatible = "fixed-clock";
+			clock-outputs = "ref";
+			clock-frequency = <20000000>;
+		};
+	};
+
+	rwid-axi {
+		ebi@50000000 {
+			nand: gpio-nand@2,0 {
+				compatible = "gpio-control-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <2 0x0000 0x1000>;
+				bus-clock = <&pclk>, "bus";
+				gpio-control-nand,io-sync-reg =
+					<0x00000000 0x80220000>;
+
+				gpios = <&banka 1 0	/* rdy */
+					 &banka 2 0 	/* nce */
+					 &banka 3 0 	/* ale */
+					 &banka 4 0 	/* cle */
+					 0		/* nwp */>;
+
+				boot@100000 {
+					label = "Boot";
+					reg = <0x100000 0x80000>;
+				};
+
+				redundant-boot@200000 {
+					label = "Redundant Boot";
+					reg = <0x200000 0x80000>;
+				};
+
+				boot-env@300000 {
+					label = "Boot Evironment";
+					reg = <0x300000 0x20000>;
+				};
+
+				redundant-boot-env@320000 {
+					label = "Redundant Boot Environment";
+					reg = <0x300000 0x20000>;
+				};
+
+				kernel@380000 {
+					label = "Kernel";
+					reg = <0x380000 0x800000>;
+				};
+
+				fs@b80000 {
+					label = "File System";
+					reg = <0xb80000 0xf480000>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/picoxcell-pc7302-pc3x3.dts b/src/arm/picoxcell-pc7302-pc3x3.dts
new file mode 100644
index 000000000000..9e317a4f431c
--- /dev/null
+++ b/src/arm/picoxcell-pc7302-pc3x3.dts
@@ -0,0 +1,92 @@
+/*
+ *  Copyright (C) 2011 Picochip, Jamie Iles
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+/include/ "picoxcell-pc3x3.dtsi"
+/ {
+	model = "Picochip PC7302 (PC3X3)";
+	compatible = "picochip,pc7302-pc3x3", "picochip,pc3x3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+	chosen {
+		linux,stdout-path = &uart0;
+	};
+
+	clocks {
+		ref_clk: clock@10 {
+			compatible = "fixed-clock";
+			clock-outputs = "ref";
+			clock-frequency = <20000000>;
+		};
+
+		clkgate: clkgate@800a0048 {
+			clock@4 {
+				picochip,clk-no-disable;
+			};
+		};
+	};
+
+	rwid-axi {
+		ebi@50000000 {
+			nand: gpio-nand@2,0 {
+				compatible = "gpio-control-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <2 0x0000 0x1000>;
+				bus-clock = <&ebi_clk>, "bus";
+				gpio-control-nand,io-sync-reg =
+					<0x00000000 0x80220000>;
+
+				gpios = <&banka 1 0	/* rdy */
+					 &banka 2 0 	/* nce */
+					 &banka 3 0 	/* ale */
+					 &banka 4 0 	/* cle */
+					 0		/* nwp */>;
+
+				boot@100000 {
+					label = "Boot";
+					reg = <0x100000 0x80000>;
+				};
+
+				redundant-boot@200000 {
+					label = "Redundant Boot";
+					reg = <0x200000 0x80000>;
+				};
+
+				boot-env@300000 {
+					label = "Boot Evironment";
+					reg = <0x300000 0x20000>;
+				};
+
+				redundant-boot-env@320000 {
+					label = "Redundant Boot Environment";
+					reg = <0x300000 0x20000>;
+				};
+
+				kernel@380000 {
+					label = "Kernel";
+					reg = <0x380000 0x800000>;
+				};
+
+				fs@b80000 {
+					label = "File System";
+					reg = <0xb80000 0xf480000>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/prima2-evb.dts b/src/arm/prima2-evb.dts
new file mode 100644
index 000000000000..57286b4e7b87
--- /dev/null
+++ b/src/arm/prima2-evb.dts
@@ -0,0 +1,37 @@
+/*
+ * DTS file for CSR SiRFprimaII Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "prima2.dtsi"
+
+/ {
+	model = "CSR SiRFprimaII Evaluation Board";
+	compatible = "sirf,prima2", "sirf,prima2-cb";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	axi {
+		peri-iobg {
+			uart@b0060000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins_a>;
+			};
+			spi@b00d0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_pins_a>;
+			};
+			spi@b0170000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins_a>;
+			};
+		};
+	};
+};
diff --git a/src/arm/prima2.dtsi b/src/arm/prima2.dtsi
new file mode 100644
index 000000000000..1ca1a9aa953f
--- /dev/null
+++ b/src/arm/prima2.dtsi
@@ -0,0 +1,840 @@
+/*
+ * DTS file for CSR SiRFprimaII SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+	compatible = "sirf,prima2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* from bootloader */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			clocks = <&clks 12>;
+			operating-points = <
+				/* kHz    uV */
+				200000  1025000
+				400000  1025000
+				664000  1050000
+				800000  1100000
+			>;
+			clock-latency = <150000>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <29>;
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x80000000>;
+
+		l2-cache-controller@80040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x80040000 0x1000>;
+			interrupts = <59>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <1 1 1>;
+			arm,filter-ranges = <0 0x40000000>;
+		};
+
+		intc: interrupt-controller@80020000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "sirf,prima2-intc";
+			reg = <0x80020000 0x1000>;
+		};
+
+		sys-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x88000000 0x88000000 0x40000>;
+
+			clks: clock-controller@88000000 {
+				compatible = "sirf,prima2-clkc";
+				reg = <0x88000000 0x1000>;
+				interrupts = <3>;
+				#clock-cells = <1>;
+			};
+
+			rstc: reset-controller@88010000 {
+				compatible = "sirf,prima2-rstc";
+				reg = <0x88010000 0x1000>;
+				#reset-cells = <1>;
+			};
+
+			rsc-controller@88020000 {
+				compatible = "sirf,prima2-rsc";
+				reg = <0x88020000 0x1000>;
+			};
+
+			cphifbg@88030000 {
+				compatible = "sirf,prima2-cphifbg";
+				reg = <0x88030000 0x1000>;
+				clocks = <&clks 42>;
+			};
+		};
+
+		mem-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90000000 0x90000000 0x10000>;
+
+			memory-controller@90000000 {
+				compatible = "sirf,prima2-memc";
+				reg = <0x90000000 0x2000>;
+				interrupts = <27>;
+				clocks = <&clks 5>;
+			};
+
+			memc-monitor {
+				compatible = "sirf,prima2-memcmon";
+				reg = <0x90002000 0x200>;
+				interrupts = <4>;
+				clocks = <&clks 32>;
+			};
+		};
+
+		disp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90010000 0x90010000 0x30000>;
+
+			display@90010000 {
+				compatible = "sirf,prima2-lcd";
+				reg = <0x90010000 0x20000>;
+				interrupts = <30>;
+			};
+
+			vpp@90020000 {
+				compatible = "sirf,prima2-vpp";
+				reg = <0x90020000 0x10000>;
+				interrupts = <31>;
+				clocks = <&clks 35>;
+				resets = <&rstc 6>;
+			};
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x98000000 0x98000000 0x8000000>;
+
+			graphics@98000000 {
+				compatible = "powervr,sgx531";
+				reg = <0x98000000 0x8000000>;
+				interrupts = <6>;
+				clocks = <&clks 32>;
+			};
+		};
+
+		multimedia-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+			multimedia@a0000000 {
+				compatible = "sirf,prima2-video-codec";
+				reg = <0xa0000000 0x8000000>;
+				interrupts = <5>;
+				clocks = <&clks 33>;
+			};
+		};
+
+		dsp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa8000000 0xa8000000 0x2000000>;
+
+			dspif@a8000000 {
+				compatible = "sirf,prima2-dspif";
+				reg = <0xa8000000 0x10000>;
+				interrupts = <9>;
+				resets = <&rstc 1>;
+			};
+
+			gps@a8010000 {
+				compatible = "sirf,prima2-gps";
+				reg = <0xa8010000 0x10000>;
+				interrupts = <7>;
+				clocks = <&clks 9>;
+				resets = <&rstc 2>;
+			};
+
+			dsp@a9000000 {
+				compatible = "sirf,prima2-dsp";
+				reg = <0xa9000000 0x1000000>;
+				interrupts = <8>;
+				clocks = <&clks 8>;
+				resets = <&rstc 0>;
+			};
+		};
+
+		peri-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0xb0000000 0x180000>,
+			       <0x56000000 0x56000000 0x1b00000>;
+
+			timer@b0020000 {
+				compatible = "sirf,prima2-tick";
+				reg = <0xb0020000 0x1000>;
+				interrupts = <0>;
+				clocks = <&clks 11>;
+			};
+
+			nand@b0030000 {
+				compatible = "sirf,prima2-nand";
+				reg = <0xb0030000 0x10000>;
+				interrupts = <41>;
+				clocks = <&clks 26>;
+			};
+
+			audio@b0040000 {
+				compatible = "sirf,prima2-audio";
+				reg = <0xb0040000 0x10000>;
+				interrupts = <35>;
+				clocks = <&clks 27>;
+			};
+
+			uart0: uart@b0050000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0050000 0x1000>;
+				interrupts = <17>;
+				fifosize = <128>;
+				clocks = <&clks 13>;
+				dmas = <&dmac1 5>, <&dmac0 2>;
+				dma-names = "rx", "tx";
+			};
+
+			uart1: uart@b0060000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0060000 0x1000>;
+				interrupts = <18>;
+				fifosize = <32>;
+				clocks = <&clks 14>;
+			};
+
+			uart2: uart@b0070000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0070000 0x1000>;
+				interrupts = <19>;
+				fifosize = <128>;
+				clocks = <&clks 15>;
+				dmas = <&dmac0 6>, <&dmac0 7>;
+				dma-names = "rx", "tx";
+			};
+
+			usp0: usp@b0080000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0080000 0x10000>;
+				interrupts = <20>;
+				fifosize = <128>;
+				clocks = <&clks 28>;
+				dmas = <&dmac1 1>, <&dmac1 2>;
+				dma-names = "rx", "tx";
+			};
+
+			usp1: usp@b0090000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0090000 0x10000>;
+				interrupts = <21>;
+				fifosize = <128>;
+				clocks = <&clks 29>;
+				dmas = <&dmac0 14>, <&dmac0 15>;
+				dma-names = "rx", "tx";
+			};
+
+			usp2: usp@b00a0000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb00a0000 0x10000>;
+				interrupts = <22>;
+				fifosize = <128>;
+				clocks = <&clks 30>;
+				dmas = <&dmac0 10>, <&dmac0 11>;
+				dma-names = "rx", "tx";
+			};
+
+			dmac0: dma-controller@b00b0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb00b0000 0x10000>;
+				interrupts = <12>;
+				clocks = <&clks 24>;
+				#dma-cells = <1>;
+			};
+
+			dmac1: dma-controller@b0160000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb0160000 0x10000>;
+				interrupts = <13>;
+				clocks = <&clks 25>;
+				#dma-cells = <1>;
+			};
+
+			vip@b00C0000 {
+				compatible = "sirf,prima2-vip";
+				reg = <0xb00C0000 0x10000>;
+				clocks = <&clks 31>;
+				interrupts = <14>;
+				sirf,vip-dma-rx-channel = <16>;
+			};
+
+			spi0: spi@b00d0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb00d0000 0x10000>;
+				interrupts = <15>;
+				sirf,spi-num-chipselects = <1>;
+				dmas = <&dmac1 9>,
+				     <&dmac1 4>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 19>;
+				status = "disabled";
+			};
+
+			spi1: spi@b0170000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb0170000 0x10000>;
+				interrupts = <16>;
+				sirf,spi-num-chipselects = <1>;
+				dmas = <&dmac0 12>,
+				     <&dmac0 13>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clks 20>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@b00e0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00e0000 0x10000>;
+				interrupts = <24>;
+				clocks = <&clks 17>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			i2c1: i2c@b00f0000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00f0000 0x10000>;
+				interrupts = <25>;
+				clocks = <&clks 18>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			tsc@b0110000 {
+				compatible = "sirf,prima2-tsc";
+				reg = <0xb0110000 0x10000>;
+				interrupts = <33>;
+				clocks = <&clks 16>;
+			};
+
+			gpio: pinctrl@b0120000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,prima2-pinctrl";
+				reg = <0xb0120000 0x10000>;
+				interrupts = <43 44 45 46 47>;
+				gpio-controller;
+				interrupt-controller;
+
+				lcd_16pins_a: lcd0@0 {
+					lcd {
+						sirf,pins = "lcd_16bitsgrp";
+						sirf,function = "lcd_16bits";
+					};
+				};
+				lcd_18pins_a: lcd0@1 {
+					lcd {
+						sirf,pins = "lcd_18bitsgrp";
+						sirf,function = "lcd_18bits";
+					};
+				};
+				lcd_24pins_a: lcd0@2 {
+					lcd {
+						sirf,pins = "lcd_24bitsgrp";
+						sirf,function = "lcd_24bits";
+					};
+				};
+				lcdrom_pins_a: lcdrom0@0 {
+					lcd {
+						sirf,pins = "lcdromgrp";
+						sirf,function = "lcdrom";
+					};
+				};
+				uart0_pins_a: uart0@0 {
+					uart {
+						sirf,pins = "uart0grp";
+						sirf,function = "uart0";
+					};
+				};
+				uart0_noflow_pins_a: uart0@1 {
+					uart {
+						sirf,pins = "uart0_nostreamctrlgrp";
+						sirf,function = "uart0_nostreamctrl";
+					};
+				};
+				uart1_pins_a: uart1@0 {
+					uart {
+						sirf,pins = "uart1grp";
+						sirf,function = "uart1";
+					};
+				};
+				uart2_pins_a: uart2@0 {
+					uart {
+						sirf,pins = "uart2grp";
+						sirf,function = "uart2";
+					};
+				};
+				uart2_noflow_pins_a: uart2@1 {
+					uart {
+						sirf,pins = "uart2_nostreamctrlgrp";
+						sirf,function = "uart2_nostreamctrl";
+					};
+				};
+				spi0_pins_a: spi0@0 {
+					spi {
+						sirf,pins = "spi0grp";
+						sirf,function = "spi0";
+					};
+				};
+				spi1_pins_a: spi1@0 {
+					spi {
+						sirf,pins = "spi1grp";
+						sirf,function = "spi1";
+					};
+				};
+				i2c0_pins_a: i2c0@0 {
+					i2c {
+						sirf,pins = "i2c0grp";
+						sirf,function = "i2c0";
+					};
+				};
+				i2c1_pins_a: i2c1@0 {
+					i2c {
+						sirf,pins = "i2c1grp";
+						sirf,function = "i2c1";
+					};
+				};
+                                pwm0_pins_a: pwm0@0 {
+                                        pwm {
+                                                sirf,pins = "pwm0grp";
+                                                sirf,function = "pwm0";
+                                        };
+                                };
+                                pwm1_pins_a: pwm1@0 {
+                                        pwm {
+                                                sirf,pins = "pwm1grp";
+                                                sirf,function = "pwm1";
+                                        };
+                                };
+                                pwm2_pins_a: pwm2@0 {
+                                        pwm {
+                                                sirf,pins = "pwm2grp";
+                                                sirf,function = "pwm2";
+                                        };
+                                };
+                                pwm3_pins_a: pwm3@0 {
+                                        pwm {
+                                                sirf,pins = "pwm3grp";
+                                                sirf,function = "pwm3";
+                                        };
+                                };
+                                gps_pins_a: gps@0 {
+                                        gps {
+                                                sirf,pins = "gpsgrp";
+                                                sirf,function = "gps";
+                                        };
+                                };
+                                vip_pins_a: vip@0 {
+                                        vip {
+                                                sirf,pins = "vipgrp";
+                                                sirf,function = "vip";
+                                        };
+                                };
+                                sdmmc0_pins_a: sdmmc0@0 {
+                                        sdmmc0 {
+                                                sirf,pins = "sdmmc0grp";
+                                                sirf,function = "sdmmc0";
+                                        };
+                                };
+                                sdmmc1_pins_a: sdmmc1@0 {
+                                        sdmmc1 {
+                                                sirf,pins = "sdmmc1grp";
+                                                sirf,function = "sdmmc1";
+                                        };
+                                };
+                                sdmmc2_pins_a: sdmmc2@0 {
+                                        sdmmc2 {
+                                                sirf,pins = "sdmmc2grp";
+                                                sirf,function = "sdmmc2";
+                                        };
+                                };
+                                sdmmc3_pins_a: sdmmc3@0 {
+                                        sdmmc3 {
+                                                sirf,pins = "sdmmc3grp";
+                                                sirf,function = "sdmmc3";
+                                        };
+                                };
+                                sdmmc4_pins_a: sdmmc4@0 {
+                                        sdmmc4 {
+                                                sirf,pins = "sdmmc4grp";
+                                                sirf,function = "sdmmc4";
+                                        };
+                                };
+                                sdmmc5_pins_a: sdmmc5@0 {
+                                        sdmmc5 {
+                                                sirf,pins = "sdmmc5grp";
+                                                sirf,function = "sdmmc5";
+                                        };
+                                };
+				i2s_mclk_pins_a: i2s_mclk@0 {
+                                        i2s_mclk {
+                                                sirf,pins = "i2smclkgrp";
+                                                sirf,function = "i2s_mclk";
+                                        };
+                                };
+				i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 {
+                                        i2s_ext_clk_input {
+                                                sirf,pins = "i2s_ext_clk_inputgrp";
+                                                sirf,function = "i2s_ext_clk_input";
+                                        };
+                                };
+                                i2s_pins_a: i2s@0 {
+                                        i2s {
+                                                sirf,pins = "i2sgrp";
+                                                sirf,function = "i2s";
+                                        };
+                                };
+				i2s_no_din_pins_a: i2s_no_din@0 {
+                                        i2s_no_din {
+                                                sirf,pins = "i2s_no_dingrp";
+                                                sirf,function = "i2s_no_din";
+                                        };
+                                };
+				i2s_6chn_pins_a: i2s_6chn@0 {
+                                        i2s_6chn {
+                                                sirf,pins = "i2s_6chngrp";
+                                                sirf,function = "i2s_6chn";
+                                        };
+                                };
+                                ac97_pins_a: ac97@0 {
+                                        ac97 {
+                                                sirf,pins = "ac97grp";
+                                                sirf,function = "ac97";
+                                        };
+                                };
+                                nand_pins_a: nand@0 {
+                                        nand {
+                                                sirf,pins = "nandgrp";
+                                                sirf,function = "nand";
+                                        };
+                                };
+                                usp0_pins_a: usp0@0 {
+                                        usp0 {
+                                                sirf,pins = "usp0grp";
+                                                sirf,function = "usp0";
+                                        };
+                                };
+				usp0_uart_nostreamctrl_pins_a: usp0@1 {
+                                        usp0 {
+                                                sirf,pins =
+							"usp0_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp0_uart_nostreamctrl";
+                                        };
+                                };
+                                usp0_only_utfs_pins_a: usp0@2 {
+                                        usp0 {
+                                                sirf,pins = "usp0_only_utfs_grp";
+                                                sirf,function = "usp0_only_utfs";
+                                        };
+                                };
+                                usp0_only_urfs_pins_a: usp0@3 {
+                                        usp0 {
+                                                sirf,pins = "usp0_only_urfs_grp";
+                                                sirf,function = "usp0_only_urfs";
+                                        };
+                                };
+                                usp1_pins_a: usp1@0 {
+                                        usp1 {
+                                                sirf,pins = "usp1grp";
+                                                sirf,function = "usp1";
+                                        };
+                                };
+				usp1_uart_nostreamctrl_pins_a: usp1@1 {
+                                        usp1 {
+                                                sirf,pins =
+							"usp1_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp1_uart_nostreamctrl";
+                                        };
+                                };
+                                usp2_pins_a: usp2@0 {
+                                        usp2 {
+                                                sirf,pins = "usp2grp";
+                                                sirf,function = "usp2";
+                                        };
+                                };
+				usp2_uart_nostreamctrl_pins_a: usp2@1 {
+                                        usp2 {
+                                                sirf,pins =
+							"usp2_uart_nostreamctrl_grp";
+                                                sirf,function =
+							"usp2_uart_nostreamctrl";
+                                        };
+                                };
+                                usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
+                                        usb0_utmi_drvbus {
+                                                sirf,pins = "usb0_utmi_drvbusgrp";
+                                                sirf,function = "usb0_utmi_drvbus";
+                                        };
+                                };
+                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
+                                        usb1_utmi_drvbus {
+                                                sirf,pins = "usb1_utmi_drvbusgrp";
+                                                sirf,function = "usb1_utmi_drvbus";
+                                        };
+                                };
+                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
+                                        usb1_dp_dn {
+                                                sirf,pins = "usb1_dp_dngrp";
+                                                sirf,function = "usb1_dp_dn";
+                                        };
+                                };
+                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
+                                        uart1_route_io_usb1 {
+                                                sirf,pins = "uart1_route_io_usb1grp";
+                                                sirf,function = "uart1_route_io_usb1";
+                                        };
+                                };
+                                warm_rst_pins_a: warm_rst@0 {
+                                        warm_rst {
+                                                sirf,pins = "warm_rstgrp";
+                                                sirf,function = "warm_rst";
+                                        };
+                                };
+                                pulse_count_pins_a: pulse_count@0 {
+                                        pulse_count {
+                                                sirf,pins = "pulse_countgrp";
+                                                sirf,function = "pulse_count";
+                                        };
+                                };
+                                cko0_pins_a: cko0@0 {
+                                        cko0 {
+                                                sirf,pins = "cko0grp";
+                                                sirf,function = "cko0";
+                                        };
+                                };
+                                cko1_pins_a: cko1@0 {
+                                        cko1 {
+                                                sirf,pins = "cko1grp";
+                                                sirf,function = "cko1";
+                                        };
+                                };
+			};
+
+			pwm@b0130000 {
+				compatible = "sirf,prima2-pwm";
+				reg = <0xb0130000 0x10000>;
+				clocks = <&clks 21>;
+			};
+
+			efusesys@b0140000 {
+				compatible = "sirf,prima2-efuse";
+				reg = <0xb0140000 0x10000>;
+				clocks = <&clks 22>;
+			};
+
+			pulsec@b0150000 {
+				compatible = "sirf,prima2-pulsec";
+				reg = <0xb0150000 0x10000>;
+				interrupts = <48>;
+				clocks = <&clks 23>;
+			};
+
+			pci-iobg {
+				compatible = "sirf,prima2-pciiobg", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x56000000 0x56000000 0x1b00000>;
+
+				sd0: sdhci@56000000 {
+					cell-index = <0>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56000000 0x100000>;
+					interrupts = <38>;
+					status = "disabled";
+					bus-width = <8>;
+					clocks = <&clks 36>;
+				};
+
+				sd1: sdhci@56100000 {
+					cell-index = <1>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56100000 0x100000>;
+					interrupts = <38>;
+					status = "disabled";
+					bus-width = <4>;
+					clocks = <&clks 36>;
+				};
+
+				sd2: sdhci@56200000 {
+					cell-index = <2>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56200000 0x100000>;
+					interrupts = <23>;
+					status = "disabled";
+					clocks = <&clks 37>;
+				};
+
+				sd3: sdhci@56300000 {
+					cell-index = <3>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56300000 0x100000>;
+					interrupts = <23>;
+					status = "disabled";
+					clocks = <&clks 37>;
+				};
+
+				sd4: sdhci@56400000 {
+					cell-index = <4>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56400000 0x100000>;
+					interrupts = <39>;
+					status = "disabled";
+					clocks = <&clks 38>;
+				};
+
+				sd5: sdhci@56500000 {
+					cell-index = <5>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56500000 0x100000>;
+					interrupts = <39>;
+					clocks = <&clks 38>;
+				};
+
+				pci-copy@57900000 {
+					compatible = "sirf,prima2-pcicp";
+					reg = <0x57900000 0x100000>;
+					interrupts = <40>;
+				};
+
+				rom-interface@57a00000 {
+					compatible = "sirf,prima2-romif";
+					reg = <0x57a00000 0x100000>;
+				};
+			};
+		};
+
+		rtc-iobg {
+			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80030000 0x10000>;
+
+			gpsrtc@1000 {
+				compatible = "sirf,prima2-gpsrtc";
+				reg = <0x1000 0x1000>;
+				interrupts = <55 56 57>;
+			};
+
+			sysrtc@2000 {
+				compatible = "sirf,prima2-sysrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <52 53 54>;
+			};
+
+			minigpsrtc@2000 {
+				compatible = "sirf,prima2-minigpsrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <54>;
+			};
+
+			pwrc@3000 {
+				compatible = "sirf,prima2-pwrc";
+				reg = <0x3000 0x1000>;
+				interrupts = <32>;
+			};
+		};
+
+		uus-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb8000000 0xb8000000 0x40000>;
+
+			usb0: usb@b00e0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8000000 0x10000>;
+				interrupts = <10>;
+				clocks = <&clks 40>;
+			};
+
+			usb1: usb@b00f0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8010000 0x10000>;
+				interrupts = <11>;
+				clocks = <&clks 41>;
+			};
+
+			sata@b00f0000 {
+				compatible = "synopsys,dwc-ahsata";
+				reg = <0xb8020000 0x10000>;
+				interrupts = <37>;
+			};
+
+			security@b00f0000 {
+				compatible = "sirf,prima2-security";
+				reg = <0xb8030000 0x10000>;
+				interrupts = <42>;
+				clocks = <&clks 7>;
+			};
+		};
+	};
+};
diff --git a/src/arm/pxa168-aspenite.dts b/src/arm/pxa168-aspenite.dts
new file mode 100644
index 000000000000..0a988b3fb248
--- /dev/null
+++ b/src/arm/pxa168-aspenite.dts
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "pxa168.dtsi"
+
+/ {
+	model = "Marvell PXA168 Aspenite Development Board";
+	compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc {
+		apb@d4000000 {
+			uart1: uart@d4017000 {
+				status = "okay";
+			};
+			twsi1: i2c@d4011000 {
+				status = "okay";
+			};
+			rtc: rtc@d4010000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/pxa168.dtsi b/src/arm/pxa168.dtsi
new file mode 100644
index 000000000000..b899e25cbb1b
--- /dev/null
+++ b/src/arm/pxa168.dtsi
@@ -0,0 +1,158 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/marvell,pxa168.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			uart1: uart@d4017000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <27>;
+				clocks = <&soc_clocks PXA168_CLK_UART0>;
+				resets = <&soc_clocks PXA168_CLK_UART0>;
+				status = "disabled";
+			};
+
+			uart2: uart@d4018000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <28>;
+				clocks = <&soc_clocks PXA168_CLK_UART1>;
+				resets = <&soc_clocks PXA168_CLK_UART1>;
+				status = "disabled";
+			};
+
+			uart3: uart@d4026000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4026000 0x1000>;
+				interrupts = <29>;
+				clocks = <&soc_clocks PXA168_CLK_UART2>;
+				resets = <&soc_clocks PXA168_CLK_UART2>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "marvell,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				clocks = <&soc_clocks PXA168_CLK_GPIO>;
+				resets = <&soc_clocks PXA168_CLK_GPIO>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				clocks = <&soc_clocks PXA168_CLK_TWSI0>;
+				resets = <&soc_clocks PXA168_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4025000 {
+				compatible = "mrvl,mmp-twsi";
+				reg = <0xd4025000 0x1000>;
+				interrupts = <58>;
+				clocks = <&soc_clocks PXA168_CLK_TWSI1>;
+				resets = <&soc_clocks PXA168_CLK_TWSI1>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <5 6>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				clocks = <&soc_clocks PXA168_CLK_RTC>;
+				resets = <&soc_clocks PXA168_CLK_RTC>;
+				status = "disabled";
+			};
+		};
+
+		soc_clocks: clocks{
+			compatible = "marvell,pxa168-clock";
+			reg = <0xd4050000 0x1000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git a/src/arm/pxa27x.dtsi b/src/arm/pxa27x.dtsi
new file mode 100644
index 000000000000..80fc5d7e9ef9
--- /dev/null
+++ b/src/arm/pxa27x.dtsi
@@ -0,0 +1,56 @@
+/* The pxa3xx skeleton simply augments the 2xx version */
+#include "pxa2xx.dtsi"
+#include "dt-bindings/clock/pxa2xx-clock.h"
+
+/ {
+	model = "Marvell PXA27x familiy SoC";
+	compatible = "marvell,pxa27x";
+
+	pxabus {
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <34>;
+		};
+
+		pwm0: pwm@40b00000 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40b00000 0x10>;
+			#pwm-cells = <1>;
+		};
+
+		pwm1: pwm@40b00010 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40b00010 0x10>;
+			#pwm-cells = <1>;
+		};
+
+		pwm2: pwm@40c00000 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40c00000 0x10>;
+			#pwm-cells = <1>;
+		};
+
+		pwm3: pwm@40c00010 {
+			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
+			reg = <0x40c00010 0x10>;
+			#pwm-cells = <1>;
+		};
+	};
+
+	clocks {
+	       /*
+		* The muxing of external clocks/internal dividers for osc* clock
+		* sources has been hidden under the carpet by now.
+		*/
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pxa2xx_clks: pxa2xx_clks@41300004 {
+			compatible = "marvell,pxa-clocks";
+			#clock-cells = <1>;
+			status = "okay";
+		};
+	};
+
+};
diff --git a/src/arm/pxa2xx.dtsi b/src/arm/pxa2xx.dtsi
new file mode 100644
index 000000000000..c08f84629aa9
--- /dev/null
+++ b/src/arm/pxa2xx.dtsi
@@ -0,0 +1,135 @@
+/*
+ * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Marvell PXA2xx family SoC";
+	compatible = "marvell,pxa2xx";
+	interrupt-parent = <&pxairq>;
+
+	aliases {
+		serial0 = &ffuart;
+		serial1 = &btuart;
+		serial2 = &stuart;
+		serial3 = &hwuart;
+		i2c0 = &pwri2c;
+		i2c1 = &pxai2c1;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+		cpu {
+			compatible = "marvell,xscale";
+			device_type = "cpu";
+		};
+	};
+
+	pxabus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pxairq: interrupt-controller@40d00000 {
+			#interrupt-cells = <1>;
+			compatible = "marvell,pxa-intc";
+			interrupt-controller;
+			interrupt-parent;
+			marvell,intc-nr-irqs = <32>;
+			reg = <0x40d00000 0xd0>;
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "mrvl,pxa-gpio";
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			reg = <0x40e00000 0x10000>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupts = <10>;
+			interrupt-names = "gpio_mux";
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+			ranges;
+
+			gcb0: gpio@40e00000 {
+				reg = <0x40e00000 0x4>;
+			};
+
+			gcb1: gpio@40e00004 {
+				reg = <0x40e00004 0x4>;
+			};
+
+			gcb2: gpio@40e00008 {
+				reg = <0x40e00008 0x4>;
+			};
+			gcb3: gpio@40e0000c {
+				reg = <0x40e0000c 0x4>;
+			};
+		};
+
+		ffuart: uart@40100000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40100000 0x30>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		btuart: uart@40200000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40200000 0x30>;
+			interrupts = <21>;
+			status = "disabled";
+		};
+
+		stuart: uart@40700000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x40700000 0x30>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		hwuart: uart@41100000 {
+			compatible = "mrvl,pxa-uart";
+			reg = <0x41100000 0x30>;
+			interrupts = <7>;
+			status = "disabled";
+		};
+
+		pxai2c1: i2c@40301680 {
+			compatible = "mrvl,pxa-i2c";
+			reg = <0x40301680 0x30>;
+			interrupts = <18>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb0: ohci@4c000000 {
+			compatible = "marvell,pxa-ohci";
+			reg = <0x4c000000 0x10000>;
+			interrupts = <3>;
+			status = "disabled";
+		};
+
+		mmc0: mmc@41100000 {
+			compatible = "marvell,pxa-mmc";
+			reg = <0x41100000 0x1000>;
+			interrupts = <23>;
+			status = "disabled";
+		};
+
+		rtc@40900000 {
+			compatible = "marvell,pxa-rtc";
+			reg = <0x40900000 0x3c>;
+			interrupts = <30 31>;
+		};
+	};
+};
diff --git a/src/arm/pxa3xx.dtsi b/src/arm/pxa3xx.dtsi
new file mode 100644
index 000000000000..83bb0eff697b
--- /dev/null
+++ b/src/arm/pxa3xx.dtsi
@@ -0,0 +1,43 @@
+/* The pxa3xx skeleton simply augments the 2xx version */
+/include/ "pxa2xx.dtsi"
+
+/ {
+	model = "Marvell PXA3xx familiy SoC";
+	compatible = "marvell,pxa3xx";
+
+	pxabus {
+		pwri2c: i2c@40f500c0 {
+			compatible = "mrvl,pwri2c";
+			reg = <0x40f500c0 0x30>;
+			interrupts = <6>;
+			#address-cells = <0x1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		nand0: nand@43100000 {
+			compatible = "marvell,pxa3xx-nand";
+			reg = <0x43100000 90>;
+			interrupts = <45>;
+			#address-cells = <1>;
+			#size-cells = <1>;	
+			status = "disabled";
+		};
+
+		pxairq: interrupt-controller@40d00000 {
+			marvell,intc-priority;
+			marvell,intc-nr-irqs = <56>;
+		};
+
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa3xx-gpio";
+			reg = <0x40e00000 0x10000>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
+			interrupts = <8 9 10>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+		};
+	};
+};
diff --git a/src/arm/pxa910-dkb.dts b/src/arm/pxa910-dkb.dts
new file mode 100644
index 000000000000..c82f2810ec73
--- /dev/null
+++ b/src/arm/pxa910-dkb.dts
@@ -0,0 +1,175 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "pxa910.dtsi"
+
+/ {
+	model = "Marvell PXA910 DKB Development Board";
+	compatible = "mrvl,pxa910-dkb", "mrvl,pxa910";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on";
+	};
+
+	memory {
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc {
+		apb@d4000000 {
+			uart1: uart@d4017000 {
+				status = "okay";
+			};
+			twsi1: i2c@d4011000 {
+				status = "okay";
+
+				pmic: 88pm860x@34 {
+					compatible = "marvell,88pm860x";
+					reg = <0x34>;
+					interrupts = <4>;
+					interrupt-parent = <&intc>;
+					interrupt-controller;
+					#interrupt-cells = <1>;
+
+					marvell,88pm860x-irq-read-clr;
+					marvell,88pm860x-slave-addr = <0x11>;
+
+					regulators {
+						BUCK1 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <1500000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						BUCK2 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <1500000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						BUCK3 {
+							regulator-min-microvolt = <1000000>;
+							regulator-max-microvolt = <3000000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO1 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <2800000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO2 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO3 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO4 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO5 {
+							regulator-min-microvolt = <2900000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO6 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO7 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <2900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO8 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <2900000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO9 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO10 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-boot-on;
+							regulator-always-on;
+						};
+						LDO12 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO13 {
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+						LDO14 {
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+					};
+					rtc {
+						marvell,88pm860x-vrtc = <1>;
+					};
+					touch {
+						marvell,88pm860x-gpadc-prebias = <1>;
+						marvell,88pm860x-gpadc-slot-cycle = <1>;
+						marvell,88pm860x-tsi-prebias = <6>;
+						marvell,88pm860x-pen-prebias = <16>;
+						marvell,88pm860x-pen-prechg = <2>;
+						marvell,88pm860x-resistor-X = <300>;
+					};
+					backlights {
+						backlight-0 {
+							marvell,88pm860x-iset = <4>;
+							marvell,88pm860x-pwm = <3>;
+						};
+						backlight-2 {
+						};
+					};
+					leds {
+						led0-red {
+							marvell,88pm860x-iset = <12>;
+						};
+						led0-green {
+							marvell,88pm860x-iset = <12>;
+						};
+						led0-blue {
+							marvell,88pm860x-iset = <12>;
+						};
+					};
+				};
+			};
+			rtc: rtc@d4010000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/pxa910.dtsi b/src/arm/pxa910.dtsi
new file mode 100644
index 000000000000..0868f6729be1
--- /dev/null
+++ b/src/arm/pxa910.dtsi
@@ -0,0 +1,175 @@
+/*
+ *  Copyright (C) 2012 Marvell Technology Group Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/marvell,pxa910.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		i2c0 = &twsi1;
+		i2c1 = &twsi2;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		L2: l2-cache {
+			compatible = "marvell,tauros2-cache";
+			marvell,tauros2-cache-features = <0x3>;
+		};
+
+		axi@d4200000 {	/* AXI */
+			compatible = "mrvl,axi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4200000 0x00200000>;
+			ranges;
+
+			intc: interrupt-controller@d4282000 {
+				compatible = "mrvl,mmp-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				reg = <0xd4282000 0x1000>;
+				mrvl,intc-nr-irqs = <64>;
+			};
+
+		};
+
+		apb@d4000000 {	/* APB */
+			compatible = "mrvl,apb-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd4000000 0x00200000>;
+			ranges;
+
+			timer0: timer@d4014000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4014000 0x100>;
+				interrupts = <13>;
+			};
+
+			timer1: timer@d4016000 {
+				compatible = "mrvl,mmp-timer";
+				reg = <0xd4016000 0x100>;
+				interrupts = <29>;
+				status = "disabled";
+			};
+
+			uart1: uart@d4017000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4017000 0x1000>;
+				interrupts = <27>;
+				clocks = <&soc_clocks PXA910_CLK_UART0>;
+				resets = <&soc_clocks PXA910_CLK_UART0>;
+				status = "disabled";
+			};
+
+			uart2: uart@d4018000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4018000 0x1000>;
+				interrupts = <28>;
+				clocks = <&soc_clocks PXA910_CLK_UART1>;
+				resets = <&soc_clocks PXA910_CLK_UART1>;
+				status = "disabled";
+			};
+
+			uart3: uart@d4036000 {
+				compatible = "mrvl,mmp-uart";
+				reg = <0xd4036000 0x1000>;
+				interrupts = <59>;
+				clocks = <&soc_clocks PXA910_CLK_UART2>;
+				resets = <&soc_clocks PXA910_CLK_UART2>;
+				status = "disabled";
+			};
+
+			gpio@d4019000 {
+				compatible = "marvell,mmp-gpio";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xd4019000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <49>;
+				interrupt-names = "gpio_mux";
+				clocks = <&soc_clocks PXA910_CLK_GPIO>;
+				resets = <&soc_clocks PXA910_CLK_GPIO>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				ranges;
+
+				gcb0: gpio@d4019000 {
+					reg = <0xd4019000 0x4>;
+				};
+
+				gcb1: gpio@d4019004 {
+					reg = <0xd4019004 0x4>;
+				};
+
+				gcb2: gpio@d4019008 {
+					reg = <0xd4019008 0x4>;
+				};
+
+				gcb3: gpio@d4019100 {
+					reg = <0xd4019100 0x4>;
+				};
+			};
+
+			twsi1: i2c@d4011000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xd4011000 0x1000>;
+				interrupts = <7>;
+				clocks = <&soc_clocks PXA910_CLK_TWSI0>;
+				resets = <&soc_clocks PXA910_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi2: i2c@d4037000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xd4037000 0x1000>;
+				interrupts = <54>;
+				clocks = <&soc_clocks PXA910_CLK_TWSI1>;
+				resets = <&soc_clocks PXA910_CLK_TWSI1>;
+				status = "disabled";
+			};
+
+			rtc: rtc@d4010000 {
+				compatible = "mrvl,mmp-rtc";
+				reg = <0xd4010000 0x1000>;
+				interrupts = <5 6>;
+				interrupt-names = "rtc 1Hz", "rtc alarm";
+				clocks = <&soc_clocks PXA910_CLK_RTC>;
+				resets = <&soc_clocks PXA910_CLK_RTC>;
+				status = "disabled";
+			};
+		};
+
+		soc_clocks: clocks{
+			compatible = "marvell,pxa910-clock";
+			reg = <0xd4050000 0x1000>,
+			      <0xd4282800 0x400>,
+			      <0xd4015000 0x1000>,
+			      <0xd403b000 0x1000>;
+			reg-names = "mpmu", "apmu", "apbc", "apbcp";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8064-cm-qs600.dts b/src/arm/qcom-apq8064-cm-qs600.dts
new file mode 100644
index 000000000000..5d75666f7f6c
--- /dev/null
+++ b/src/arm/qcom-apq8064-cm-qs600.dts
@@ -0,0 +1,59 @@
+#include "qcom-apq8064-v2.0.dtsi"
+
+/ {
+	model = "CompuLab CM-QS600";
+	compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
+
+	soc {
+		pinctrl@800000 {
+			i2c1_pins: i2c1 {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "gsbi1";
+				};
+			};
+		};
+
+		gsbi@12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+
+			i2c@12460000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+
+				eeprom: eeprom@50 {
+					compatible = "24c02";
+					reg = <0x50>;
+					pagesize = <32>;
+				};
+			};
+		};
+
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+			};
+		};
+
+		amba {
+			/* eMMC */
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+			};
+
+			/* External micro SD card */
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+			};
+			/* WLAN */
+			sdcc4: sdcc@121c0000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8064-ifc6410.dts b/src/arm/qcom-apq8064-ifc6410.dts
new file mode 100644
index 000000000000..e641001ca2a7
--- /dev/null
+++ b/src/arm/qcom-apq8064-ifc6410.dts
@@ -0,0 +1,71 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm APQ8064/IFC6410";
+	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
+
+	soc {
+		pinctrl@800000 {
+			i2c1_pins: i2c1 {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "gsbi1";
+				};
+			};
+
+			card_detect: card_detect {
+				mux {
+					pins = "gpio26";
+					function = "gpio";
+					bias-disable;
+				};
+			};
+		};
+
+		gsbi@12440000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+
+			i2c@12460000 {
+				status = "okay";
+				clock-frequency = <200000>;
+				pinctrl-0 = <&i2c1_pins>;
+				pinctrl-names = "default";
+
+				eeprom: eeprom@52 {
+					compatible = "atmel,24c128";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+		};
+
+		gsbi@16600000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16640000 {
+				status = "ok";
+			};
+		};
+
+		amba {
+			/* eMMC */
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+			};
+
+			/* External micro SD card */
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+				pinctrl-names	= "default";
+				pinctrl-0	= <&card_detect>;
+				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+			};
+			/* WLAN */
+			sdcc4: sdcc@121c0000 {
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8064-v2.0.dtsi b/src/arm/qcom-apq8064-v2.0.dtsi
new file mode 100644
index 000000000000..935c3945fc5e
--- /dev/null
+++ b/src/arm/qcom-apq8064-v2.0.dtsi
@@ -0,0 +1 @@
+#include "qcom-apq8064.dtsi"
diff --git a/src/arm/qcom-apq8064.dtsi b/src/arm/qcom-apq8064.dtsi
new file mode 100644
index 000000000000..b3154c071652
--- /dev/null
+++ b/src/arm/qcom-apq8064.dtsi
@@ -0,0 +1,353 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Qualcomm APQ8064";
+	compatible = "qcom,apq8064";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
+		};
+
+		cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		tlmm_pinmux: pinctrl@800000 {
+			compatible = "qcom,apq8064-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&ps_hold>;
+
+			sdc4_gpios: sdc4-gpios {
+				pios {
+					pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+					function = "sdc4";
+				};
+			};
+
+			ps_hold: ps_hold {
+				mux {
+					pins = "gpio78";
+					function = "ps_hold";
+				};
+			};
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc2: clock-controller@20a8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc3: clock-controller@20b8000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw2: regulator@20a9000 {
+			compatible = "qcom,saw2";
+			reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw3: regulator@20b9000 {
+			compatible = "qcom,saw2";
+			reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi1: gsbi@12440000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12440000 0x100>;
+			clocks = <&gcc GSBI1_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			i2c1: i2c@12460000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x12460000 0x1000>;
+				interrupts = <0 194 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi2: gsbi@12480000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12480000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			i2c2: i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				interrupts = <0 196 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi7: gsbi@16600000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <0 158 0x0>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-apq8064";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mmcc: clock-controller@4000000 {
+			compatible = "qcom,mmcc-apq8064";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		/* Temporary fixed regulator */
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+
+		sdcc1bam:dma@12402000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x8000>;
+			interrupts = <0 98 0>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc3bam:dma@12182000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x8000>;
+			interrupts = <0 96 0>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		sdcc4bam:dma@121c2000{
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x121c2000 0x8000>;
+			interrupts = <0 95 0>;
+			clocks = <&gcc SDC4_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: sdcc@12400000 {
+				status		= "disabled";
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg		= <0x12400000 0x2000>;
+				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <8>;
+				max-frequency	= <96000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+				dma-names = "tx", "rx";
+			};
+
+			sdcc3: sdcc@12180000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x12180000 0x2000>;
+				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <192000000>;
+				no-1-8-v;
+				vmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+				dma-names = "tx", "rx";
+			};
+
+			sdcc4: sdcc@121c0000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x121c0000 0x2000>;
+				interrupts	= <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <48000000>;
+				vmmc-supply = <&vsdcc_fixed>;
+				vqmmc-supply = <&vsdcc_fixed>;
+				dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdc4_gpios>;
+			};
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8074-dragonboard.dts b/src/arm/qcom-apq8074-dragonboard.dts
new file mode 100644
index 000000000000..47370494d0f8
--- /dev/null
+++ b/src/arm/qcom-apq8074-dragonboard.dts
@@ -0,0 +1,66 @@
+#include "qcom-msm8974.dtsi"
+
+/ {
+	model = "Qualcomm APQ8074 Dragonboard";
+	compatible = "qcom,apq8074-dragonboard", "qcom,apq8074";
+
+	soc {
+		serial@f991e000 {
+			status = "ok";
+		};
+
+		sdhci@f9824900 {
+			bus-width = <8>;
+			non-removable;
+			status = "ok";
+		};
+
+		sdhci@f98a4900 {
+			cd-gpios = <&msmgpio 62 0x1>;
+			bus-width = <4>;
+		};
+
+
+		pinctrl@fd510000 {
+			i2c11_pins: i2c11 {
+				mux {
+					pins = "gpio83", "gpio84";
+					function = "blsp_i2c11";
+				};
+			};
+
+			spi8_default: spi8_default {
+				mosi {
+					pins = "gpio45";
+					function = "blsp_spi8";
+				};
+				miso {
+					pins = "gpio46";
+					function = "blsp_spi8";
+				};
+				cs {
+					pins = "gpio47";
+					function = "blsp_spi8";
+				};
+				clk {
+					pins = "gpio48";
+					function = "blsp_spi8";
+				};
+			};
+		};
+
+		i2c@f9967000 {
+			status = "okay";
+			clock-frequency = <200000>;
+			pinctrl-0 = <&i2c11_pins>;
+			pinctrl-names = "default";
+
+			eeprom: eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+				pagesize = <32>;
+				read-only;
+			};
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8084-ifc6540.dts b/src/arm/qcom-apq8084-ifc6540.dts
new file mode 100644
index 000000000000..c9ff10821ad9
--- /dev/null
+++ b/src/arm/qcom-apq8084-ifc6540.dts
@@ -0,0 +1,23 @@
+#include "qcom-apq8084.dtsi"
+
+/ {
+	model = "Qualcomm APQ8084/IFC6540";
+	compatible = "qcom,apq8084-ifc6540", "qcom,apq8084";
+
+	soc {
+		serial@f995e000 {
+			status = "okay";
+		};
+
+		sdhci@f9824900 {
+			bus-width = <8>;
+			non-removable;
+			status = "okay";
+		};
+
+		sdhci@f98a4900 {
+			cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
+			bus-width = <4>;
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8084-mtp.dts b/src/arm/qcom-apq8084-mtp.dts
new file mode 100644
index 000000000000..8ecec58a9ff6
--- /dev/null
+++ b/src/arm/qcom-apq8084-mtp.dts
@@ -0,0 +1,12 @@
+#include "qcom-apq8084.dtsi"
+
+/ {
+	model = "Qualcomm APQ 8084-MTP";
+	compatible = "qcom,apq8084-mtp", "qcom,apq8084";
+
+	soc {
+		serial@f995e000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/qcom-apq8084.dtsi b/src/arm/qcom-apq8084.dtsi
new file mode 100644
index 000000000000..1f130bc16858
--- /dev/null
+++ b/src/arm/qcom-apq8084.dtsi
@@ -0,0 +1,230 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-apq8084.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Qualcomm APQ 8084";
+	compatible = "qcom,apq8084";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <0>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <1>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <2>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "qcom,krait";
+			reg = <3>;
+			enable-method = "qcom,kpss-acc-v2";
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+		};
+
+		L2: l2-cache {
+			compatible = "qcom,arch-cache";
+			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 7 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 2 0xf08>,
+			     <1 3 0xf08>,
+			     <1 4 0xf08>,
+			     <1 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <0 8 0x4>,
+					     <0 7 0x4>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <0 9 0x4>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <0 10 0x4>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <0 11 0x4>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <0 12 0x4>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <0 13 0x4>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <0 14 0x4>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw_l2: regulator@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		acc0: clock-controller@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc1: clock-controller@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc2: clock-controller@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		acc3: clock-controller@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>,
+			      <0xf9008000 0x1000>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-apq8084";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0xfc400000 0x4000>;
+		};
+
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,apq8084-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 208 0>;
+		};
+
+		serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <0 114 0x0>;
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		sdhci@f9824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+			interrupts = <0 123 0>, <0 138 0>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		sdhci@f98a4900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+			interrupts = <0 125 0>, <0 221 0>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/qcom-ipq8064-ap148.dts b/src/arm/qcom-ipq8064-ap148.dts
new file mode 100644
index 000000000000..55b2910efd87
--- /dev/null
+++ b/src/arm/qcom-ipq8064-ap148.dts
@@ -0,0 +1,93 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+	model = "Qualcomm IPQ8064/AP148";
+	compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+
+	soc {
+		pinmux@800000 {
+			i2c4_pins: i2c4_pinmux {
+				pins = "gpio12", "gpio13";
+				function = "gsbi4";
+				bias-disable;
+			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					drive-strength = <10>;
+					bias-none;
+				};
+			};
+		};
+
+		gsbi@16300000 {
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			status = "ok";
+			serial@16340000 {
+				status = "ok";
+			};
+
+			i2c4: i2c@16380000 {
+				status = "ok";
+
+				clock-frequency = <200000>;
+
+				pinctrl-0 = <&i2c4_pins>;
+				pinctrl-names = "default";
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "ok";
+
+			spi4: spi@1a280000 {
+				status = "ok";
+				spi-max-frequency = <50000000>;
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 0>;
+
+				flash: m25p80@0 {
+					compatible = "s25fl256s1";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partition@0 {
+						label = "rootfs";
+						reg = <0x0 0x1000000>;
+					};
+
+					partition@1 {
+						label = "scratch";
+						reg = <0x1000000 0x1000000>;
+					};
+				};
+			};
+		};
+
+		sata-phy@1b400000 {
+			status = "ok";
+		};
+
+		sata@29000000 {
+			status = "ok";
+		};
+	};
+};
diff --git a/src/arm/qcom-ipq8064-v1.0.dtsi b/src/arm/qcom-ipq8064-v1.0.dtsi
new file mode 100644
index 000000000000..7093b075e408
--- /dev/null
+++ b/src/arm/qcom-ipq8064-v1.0.dtsi
@@ -0,0 +1 @@
+#include "qcom-ipq8064.dtsi"
diff --git a/src/arm/qcom-ipq8064.dtsi b/src/arm/qcom-ipq8064.dtsi
new file mode 100644
index 000000000000..cb225dafe97c
--- /dev/null
+++ b/src/arm/qcom-ipq8064.dtsi
@@ -0,0 +1,283 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm IPQ8064";
+	compatible = "qcom,ipq8064";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nss@40000000 {
+			reg = <0x40000000 0x1000000>;
+			no-map;
+		};
+
+		smem@41000000 {
+			reg = <0x41000000 0x200000>;
+			no-map;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		qcom_pinmux: pinmux@800000 {
+			compatible = "qcom,ipq8064-pinctrl";
+			reg = <0x800000 0x4000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 16 0x4>;
+		};
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <25000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi2: gsbi@12480000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x12480000 0x100>;
+			clocks = <&gcc GSBI2_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			serial@12490000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x12490000 0x1000>,
+				      <0x12480000 0x1000>;
+				interrupts = <0 195 0x0>;
+				clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@124a0000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x124a0000 0x1000>;
+				interrupts = <0 196 0>;
+
+				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+		};
+
+		gsbi4: gsbi@16300000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16300000 0x100>;
+			clocks = <&gcc GSBI4_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			serial@16340000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16340000 0x1000>,
+				      <0x16300000 0x1000>;
+				interrupts = <0 152 0x0>;
+				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@16380000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16380000 0x1000>;
+				interrupts = <0 153 0>;
+
+				clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gsbi5: gsbi@1a200000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x1a200000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x1000>,
+				      <0x1a200000 0x1000>;
+				interrupts = <0 154 0x0>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+
+			i2c@1a280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 0>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			spi@1a280000 {
+				compatible = "qcom,spi-qup-v1.1.1";
+				reg = <0x1a280000 0x1000>;
+				interrupts = <0 155 0>;
+
+				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		sata_phy: sata-phy@1b400000 {
+			compatible = "qcom,ipq806x-sata-phy";
+			reg = <0x1b400000 0x200>;
+
+			clocks = <&gcc SATA_PHY_CFG_CLK>;
+			clock-names = "cfg";
+
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sata@29000000 {
+			compatible = "qcom,ipq806x-ahci", "generic-ahci";
+			reg = <0x29000000 0x180>;
+
+			interrupts = <0 209 0x0>;
+
+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
+				 <&gcc SATA_H_CLK>,
+				 <&gcc SATA_A_CLK>,
+				 <&gcc SATA_RXOOB_CLK>,
+				 <&gcc SATA_PMALIVE_CLK>;
+			clock-names = "slave_face", "iface", "core",
+					"rxoob", "pmalive";
+
+			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates = <100000000>, <100000000>;
+
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-ipq8064";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git a/src/arm/qcom-msm8660-surf.dts b/src/arm/qcom-msm8660-surf.dts
new file mode 100644
index 000000000000..e0883c376248
--- /dev/null
+++ b/src/arm/qcom-msm8660-surf.dts
@@ -0,0 +1,58 @@
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8660.dtsi"
+
+/ {
+	model = "Qualcomm MSM8660 SURF";
+	compatible = "qcom,msm8660-surf", "qcom,msm8660";
+
+	soc {
+		gsbi@19c00000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@19c40000 {
+				status = "ok";
+			};
+		};
+
+		amba {
+			/* eMMC */
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+			};
+
+			/* External micro SD card */
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&pmicintc {
+	keypad@148 {
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_FN_F1)
+			MATRIX_KEY(0, 1, KEY_UP)
+			MATRIX_KEY(0, 2, KEY_LEFT)
+			MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+			MATRIX_KEY(1, 0, KEY_FN_F2)
+			MATRIX_KEY(1, 1, KEY_RIGHT)
+			MATRIX_KEY(1, 2, KEY_DOWN)
+			MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+			MATRIX_KEY(2, 3, KEY_ENTER)
+			MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+			MATRIX_KEY(4, 1, KEY_UP)
+			MATRIX_KEY(4, 2, KEY_LEFT)
+			MATRIX_KEY(4, 3, KEY_HOME)
+			MATRIX_KEY(4, 4, KEY_FN_F3)
+			MATRIX_KEY(5, 0, KEY_CAMERA)
+			MATRIX_KEY(5, 1, KEY_RIGHT)
+			MATRIX_KEY(5, 2, KEY_DOWN)
+			MATRIX_KEY(5, 3, KEY_BACK)
+			MATRIX_KEY(5, 4, KEY_MENU)
+			>;
+		keypad,num-rows = <6>;
+		keypad,num-columns = <5>;
+	};
+};
diff --git a/src/arm/qcom-msm8660.dtsi b/src/arm/qcom-msm8660.dtsi
new file mode 100644
index 000000000000..0affd6193f56
--- /dev/null
+++ b/src/arm/qcom-msm8660.dtsi
@@ -0,0 +1,201 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm MSM8660";
+	compatible = "qcom,msm8660";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,scorpion";
+			enable-method = "qcom,gcc-msm8660";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2080000 {
+			compatible = "qcom,msm-8660-qgic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = < 0x02080000 0x1000 >,
+			      < 0x02081000 0x1000 >;
+		};
+
+		timer@2000000 {
+			compatible = "qcom,scss-timer", "qcom,msm-timer";
+			interrupts = <1 0 0x301>,
+				     <1 1 0x301>,
+				     <1 2 0x301>;
+			reg = <0x02000000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x40000>;
+		};
+
+		msmgpio: gpio@800000 {
+			compatible = "qcom,msm-gpio";
+			reg = <0x00800000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpio = <173>;
+			interrupts = <0 16 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8660";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		gsbi12: gsbi@19c00000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x19c00000 0x100>;
+			clocks = <&gcc GSBI12_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			serial@19c40000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x19c40000 0x1000>,
+				      <0x19c00000 0x1000>;
+				interrupts = <0 195 0x0>;
+				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8058";
+				interrupt-parent = <&msmgpio>;
+				interrupts = <88 8>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pwrkey@1c {
+					compatible = "qcom,pm8058-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 1>, <51 1>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				keypad@148 {
+					compatible = "qcom,pm8058-keypad";
+					reg = <0x148>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <74 1>, <75 1>;
+					debounce = <15>;
+					scan-delay = <32>;
+					row-hold = <91500>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8058-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 1>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+
+				vibrator@4a {
+					compatible = "qcom,pm8058-vib";
+					reg = <0x4a>;
+				};
+			};
+		};
+
+		/* Temporary fixed regulator */
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: sdcc@12400000 {
+				status		= "disabled";
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg		= <0x12400000 0x8000>;
+				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <8>;
+				max-frequency	= <48000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+			};
+
+			sdcc3: sdcc@12180000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x12180000 0x8000>;
+				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <48000000>;
+				no-1-8-v;
+				vmmc-supply = <&vsdcc_fixed>;
+			};
+		};
+	};
+
+};
diff --git a/src/arm/qcom-msm8960-cdp.dts b/src/arm/qcom-msm8960-cdp.dts
new file mode 100644
index 000000000000..7f70fae90959
--- /dev/null
+++ b/src/arm/qcom-msm8960-cdp.dts
@@ -0,0 +1,43 @@
+#include <dt-bindings/input/input.h>
+
+#include "qcom-msm8960.dtsi"
+
+/ {
+	model = "Qualcomm MSM8960 CDP";
+	compatible = "qcom,msm8960-cdp", "qcom,msm8960";
+
+	soc {
+		gsbi@16400000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+			serial@16440000 {
+				status = "ok";
+			};
+		};
+
+		amba {
+			/* eMMC */
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+			};
+
+			/* External micro SD card */
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&pmicintc {
+	keypad@148 {
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+			MATRIX_KEY(0, 3, KEY_CAMERA)
+			>;
+		keypad,num-rows = <1>;
+		keypad,num-columns = <5>;
+	};
+};
diff --git a/src/arm/qcom-msm8960.dtsi b/src/arm/qcom-msm8960.dtsi
new file mode 100644
index 000000000000..e1b0d5cd9e3c
--- /dev/null
+++ b/src/arm/qcom-msm8960.dtsi
@@ -0,0 +1,242 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+	model = "Qualcomm MSM8960";
+	compatible = "qcom,msm8960";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <1 14 0x304>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v1";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+		qcom,no-pc-write;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x02000000 0x1000>,
+			      <0x02002000 0x1000>;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <27000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		msmgpio: gpio@800000 {
+			compatible = "qcom,msm-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpio = <150>;
+			interrupts = <0 16 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x800000 0x4000>;
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-msm8960";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x900000 0x4000>;
+		};
+
+		clock-controller@4000000 {
+			compatible = "qcom,mmcc-msm8960";
+			reg = <0x4000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		gsbi5: gsbi@16400000 {
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16400000 0x100>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			serial@16440000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16440000 0x1000>,
+				      <0x16400000 0x1000>;
+				interrupts = <0 154 0x0>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8921";
+				interrupt-parent = <&msmgpio>;
+				interrupts = <104 8>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pwrkey@1c {
+					compatible = "qcom,pm8921-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 1>, <51 1>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				keypad@148 {
+					compatible = "qcom,pm8921-keypad";
+					reg = <0x148>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <74 1>, <75 1>;
+					debounce = <15>;
+					scan-delay = <32>;
+					row-hold = <91500>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8921-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 1>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+			};
+		};
+
+		rng@1a500000 {
+			compatible = "qcom,prng";
+			reg = <0x1a500000 0x200>;
+			clocks = <&gcc PRNG_CLK>;
+			clock-names = "core";
+		};
+
+		/* Temporary fixed regulator */
+		vsdcc_fixed: vsdcc-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "SDCC Power";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+		};
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			sdcc1: sdcc@12400000 {
+				status		= "disabled";
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				reg		= <0x12400000 0x8000>;
+				interrupts	= <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <8>;
+				max-frequency	= <96000000>;
+				non-removable;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				vmmc-supply = <&vsdcc_fixed>;
+			};
+
+			sdcc3: sdcc@12180000 {
+				compatible	= "arm,pl18x", "arm,primecell";
+				arm,primecell-periphid = <0x00051180>;
+				status		= "disabled";
+				reg		= <0x12180000 0x8000>;
+				interrupts	= <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names	= "cmd_irq";
+				clocks		= <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+				clock-names	= "mclk", "apb_pclk";
+				bus-width	= <4>;
+				cap-sd-highspeed;
+				cap-mmc-highspeed;
+				max-frequency	= <192000000>;
+				no-1-8-v;
+				vmmc-supply = <&vsdcc_fixed>;
+			};
+		};
+	};
+};
diff --git a/src/arm/qcom-msm8974-sony-xperia-honami.dts b/src/arm/qcom-msm8974-sony-xperia-honami.dts
new file mode 100644
index 000000000000..cccc21b7c8fd
--- /dev/null
+++ b/src/arm/qcom-msm8974-sony-xperia-honami.dts
@@ -0,0 +1,17 @@
+#include "qcom-msm8974.dtsi"
+
+/ {
+	model = "Sony Xperia Z1";
+	compatible = "sony,xperia-honami", "qcom,msm8974";
+
+	memory@0 {
+		reg = <0 0x40000000>, <0x40000000 0x40000000>;
+		device_type = "memory";
+	};
+};
+
+&soc {
+	serial@f991e000 {
+		status = "ok";
+	};
+};
diff --git a/src/arm/qcom-msm8974.dtsi b/src/arm/qcom-msm8974.dtsi
new file mode 100644
index 000000000000..e265ec16a787
--- /dev/null
+++ b/src/arm/qcom-msm8974.dtsi
@@ -0,0 +1,251 @@
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include "skeleton.dtsi"
+
+/ {
+	model = "Qualcomm MSM8974";
+	compatible = "qcom,msm8974";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <1 9 0xf04>;
+
+		cpu@0 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+		};
+
+		cpu@1 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+		};
+
+		cpu@2 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+		};
+
+		cpu@3 {
+			compatible = "qcom,krait";
+			enable-method = "qcom,kpss-acc-v2";
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			qcom,saw = <&saw_l2>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 7 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 2 0xf08>,
+			     <1 3 0xf08>,
+			     <1 4 0xf08>,
+			     <1 1 0xf08>;
+		clock-frequency = <19200000>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@f9000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xf9000000 0x1000>,
+			      <0xf9002000 0x1000>;
+		};
+
+		timer@f9020000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xf9020000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@f9021000 {
+				frame-number = <0>;
+				interrupts = <0 8 0x4>,
+					     <0 7 0x4>;
+				reg = <0xf9021000 0x1000>,
+				      <0xf9022000 0x1000>;
+			};
+
+			frame@f9023000 {
+				frame-number = <1>;
+				interrupts = <0 9 0x4>;
+				reg = <0xf9023000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9024000 {
+				frame-number = <2>;
+				interrupts = <0 10 0x4>;
+				reg = <0xf9024000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9025000 {
+				frame-number = <3>;
+				interrupts = <0 11 0x4>;
+				reg = <0xf9025000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9026000 {
+				frame-number = <4>;
+				interrupts = <0 12 0x4>;
+				reg = <0xf9026000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9027000 {
+				frame-number = <5>;
+				interrupts = <0 13 0x4>;
+				reg = <0xf9027000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@f9028000 {
+				frame-number = <6>;
+				interrupts = <0 14 0x4>;
+				reg = <0xf9028000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		saw_l2: regulator@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		acc0: clock-controller@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc1: clock-controller@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc2: clock-controller@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc3: clock-controller@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0xfc400000 0x4000>;
+		};
+
+		mmcc: clock-controller@fd8c0000 {
+			compatible = "qcom,mmcc-msm8974";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0xfd8c0000 0x6000>;
+		};
+
+		serial@f991e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf991e000 0x1000>;
+			interrupts = <0 108 0x0>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		sdhci@f9824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+			interrupts = <0 123 0>, <0 138 0>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		sdhci@f98a4900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+			interrupts = <0 125 0>, <0 221 0>;
+			interrupt-names = "hc_irq", "pwr_irq";
+			clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		rng@f9bff000 {
+			compatible = "qcom,prng";
+			reg = <0xf9bff000 0x200>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		msmgpio: pinctrl@fd510000 {
+			compatible = "qcom,msm8974-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <0 208 0>;
+		};
+
+		blsp_i2c11: i2c@f9967000 {
+			status = "disable";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9967000 0x1000>;
+			interrupts = <0 105 IRQ_TYPE_NONE>;
+			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
diff --git a/src/arm/r7s72100-genmai.dts b/src/arm/r7s72100-genmai.dts
new file mode 100644
index 000000000000..a9da7a89fc4b
--- /dev/null
+++ b/src/arm/r7s72100-genmai.dts
@@ -0,0 +1,74 @@
+/*
+ * Device Tree Source for the Genmai board
+ *
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r7s72100.dtsi"
+
+/ {
+	model = "Genmai";
+	compatible = "renesas,genmai", "renesas,r7s72100";
+
+	aliases {
+		serial2 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = &scif2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x08000000 0x08000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <13330000>;
+};
+
+&usb_x1_clk {
+	clock-frequency = <48000000>;
+};
+
+&mtu2 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@50 {
+		compatible = "renesas,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&scif2 {
+	status = "okay";
+};
+
+&spi4 {
+	status = "okay";
+
+	codec: codec@0 {
+		compatible = "wlf,wm8978";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+	};
+};
diff --git a/src/arm/r7s72100.dtsi b/src/arm/r7s72100.dtsi
new file mode 100644
index 000000000000..277e73c110e5
--- /dev/null
+++ b/src/arm/r7s72100.dtsi
@@ -0,0 +1,407 @@
+/*
+ * Device Tree Source for the r7s72100 SoC
+ *
+ * Copyright (C) 2013-14 Renesas Solutions Corp.
+ * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r7s72100-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r7s72100";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+	};
+
+	clocks {
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* External clocks */
+		extal_clk: extal_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			/* If clk present, value must be set by board */
+			clock-frequency = <0>;
+			clock-output-names = "extal";
+		};
+
+		usb_x1_clk: usb_x1_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			/* If clk present, value must be set by board */
+			clock-frequency = <0>;
+			clock-output-names = "usb_x1";
+		};
+
+		/* Fixed factor clocks */
+		b_clk: b_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+			clock-mult = <1>;
+			clock-div = <3>;
+			clock-output-names = "b";
+		};
+		p1_clk: p1_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+			clock-mult = <1>;
+			clock-div = <6>;
+			clock-output-names = "p1";
+		};
+		p0_clk: p0_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R7S72100_CLK_PLL>;
+			clock-mult = <1>;
+			clock-div = <12>;
+			clock-output-names = "p0";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@fcfe0000 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-cpg-clocks",
+				     "renesas,rz-cpg-clocks";
+			reg = <0xfcfe0000 0x18>;
+			clocks = <&extal_clk>, <&usb_x1_clk>;
+			clock-output-names = "pll", "i", "g";
+		};
+
+		/* MSTP clocks */
+		mstp3_clks: mstp3_clks@fcfe0420 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0420 4>;
+			clocks = <&p0_clk>;
+			clock-indices = <R7S72100_CLK_MTU2>;
+			clock-output-names = "mtu2";
+		};
+
+		mstp4_clks: mstp4_clks@fcfe0424 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0424 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3
+				R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7
+			>;
+			clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7";
+		};
+
+		mstp9_clks: mstp9_clks@fcfe0438 {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe0438 4>;
+			clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>;
+			clock-indices = <
+				R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3
+			>;
+			clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3";
+		};
+
+		mstp10_clks: mstp10_clks@fcfe043c {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe043c 4>;
+			clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>,
+				 <&p1_clk>;
+			clock-indices = <
+				R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3
+				R7S72100_CLK_SPI4
+			>;
+			clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	scif0: serial@e8007000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8007000 64>;
+		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 191 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 192 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial@e8007800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8007800 64>;
+		interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 195 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 196 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 193 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif2: serial@e8008000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8008000 64>;
+		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 199 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 200 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 197 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif3: serial@e8008800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8008800 64>;
+		interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 203 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 204 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 201 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif4: serial@e8009000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8009000 64>;
+		interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 207 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 208 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 205 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif5: serial@e8009800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe8009800 64>;
+		interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 211 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 212 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 209 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif6: serial@e800a000 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe800a000 64>;
+		interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 215 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 216 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 213 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif7: serial@e800a800 {
+		compatible = "renesas,scif-r7s72100", "renesas,scif";
+		reg = <0xe800a800 64>;
+		interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 219 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 220 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 217 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	spi0: spi@e800c800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800c800 0x24>;
+		interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 239 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 240 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@e800d000 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800d000 0x24>;
+		interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 242 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 243 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@e800d800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800d800 0x24>;
+		interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 245 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi3: spi@e800e000 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800e000 0x24>;
+		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 248 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 249 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi4: spi@e800e800 {
+		compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+		reg = <0xe800e800 0x24>;
+		interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 251 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 252 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error", "rx", "tx";
+		clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@e8201000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0xe8201000 0x1000>,
+			<0xe8202000 0x1000>;
+	};
+
+	i2c0: i2c@fcfee000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+		reg = <0xfcfee000 0x44>;
+		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 158 IRQ_TYPE_EDGE_RISING>,
+			     <0 159 IRQ_TYPE_EDGE_RISING>,
+			     <0 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 164 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@fcfee400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+		reg = <0xfcfee400 0x44>;
+		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 166 IRQ_TYPE_EDGE_RISING>,
+			     <0 167 IRQ_TYPE_EDGE_RISING>,
+			     <0 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@fcfee800 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+		reg = <0xfcfee800 0x44>;
+		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 174 IRQ_TYPE_EDGE_RISING>,
+			     <0 175 IRQ_TYPE_EDGE_RISING>,
+			     <0 176 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 177 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 178 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 179 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 180 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@fcfeec00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+		reg = <0xfcfeec00 0x44>;
+		interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 182 IRQ_TYPE_EDGE_RISING>,
+			     <0 183 IRQ_TYPE_EDGE_RISING>,
+			     <0 184 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 185 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 186 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 187 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	mtu2: timer@fcff0000 {
+		compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+		reg = <0xfcff0000 0x400>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tgi0a";
+		clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+};
diff --git a/src/arm/r8a73a4-ape6evm-reference.dts b/src/arm/r8a73a4-ape6evm-reference.dts
new file mode 100644
index 000000000000..b3d8f844b57a
--- /dev/null
+++ b/src/arm/r8a73a4-ape6evm-reference.dts
@@ -0,0 +1,156 @@
+/*
+ * Device Tree Source for the APE6EVM board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a73a4.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "APE6EVM";
+	compatible = "renesas,ape6evm-reference", "renesas,r8a73a4";
+
+	aliases {
+		serial0 = &scifa0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw";
+		stdout-path = &scifa0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	vcc_mmc0: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0 Vcc";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/* Common 3.3V rail, used by several devices on APE6EVM */
+	ape6evm_fixed_3v3: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	lbsc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x20000000>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	vdd_dvfs: max8973@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <
+		/* kHz  uV */
+		1950000 1115000
+		1462500  995000
+	>;
+	voltage-tolerance = <1>; /* 1% */
+};
+
+&cmt1 {
+	status = "okay";
+};
+
+&pfc {
+	scifa0_pins: serial0 {
+		renesas,groups = "scifa0_data";
+		renesas,function = "scifa0";
+	};
+
+	mmc0_pins: mmc {
+		renesas,groups = "mmc0_data8", "mmc0_ctrl";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi1_pins: sd1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+};
+
+&mmcif0 {
+	vmmc-supply = <&vcc_mmc0>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	status = "okay";
+};
+
+&scifa0 {
+	pinctrl-0 = <&scifa0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	vmmc-supply = <&vcc_sdhi0>;
+	bus-width = <4>;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi0_pins>;
+	status = "okay";
+};
+
+&sdhi1 {
+	vmmc-supply = <&ape6evm_fixed_3v3>;
+	bus-width = <4>;
+	broken-cd;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi1_pins>;
+	status = "okay";
+};
diff --git a/src/arm/r8a73a4-ape6evm.dts b/src/arm/r8a73a4-ape6evm.dts
new file mode 100644
index 000000000000..0d50bef01234
--- /dev/null
+++ b/src/arm/r8a73a4-ape6evm.dts
@@ -0,0 +1,246 @@
+/*
+ * Device Tree Source for the APE6EVM board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a73a4.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "APE6EVM";
+	compatible = "renesas,ape6evm", "renesas,r8a73a4";
+
+	aliases {
+		serial0 = &scifa0;
+	};
+
+	chosen {
+		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+		stdout-path = &scifa0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	vcc_mmc0: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "MMC0 Vcc";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 76 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */
+	ape6evm_fixed_1v8: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	ape6evm_fixed_3v3: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	lbsc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x20000000>;
+
+		ethernet@8000000 {
+			compatible = "smsc,lan9220", "smsc,lan9115";
+			reg = <0x08000000 0x1000>;
+			interrupt-parent = <&irqc1>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&ape6evm_fixed_3v3>;
+			vddvario-supply = <&ape6evm_fixed_1v8>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 28 GPIO_ACTIVE_LOW>;
+			label = "GNSS_EN";
+		};
+		led2 {
+			gpios = <&pfc 126 GPIO_ACTIVE_LOW>;
+			label = "NFC_NRST";
+		};
+		led3 {
+			gpios = <&pfc 132 GPIO_ACTIVE_LOW>;
+			label = "GNSS_NRST";
+		};
+		led4 {
+			gpios = <&pfc 232 GPIO_ACTIVE_LOW>;
+			label = "BT_WAKEUP";
+		};
+		led5 {
+			gpios = <&pfc 250 GPIO_ACTIVE_LOW>;
+			label = "STROBE";
+		};
+		led6 {
+			gpios = <&pfc 288 GPIO_ACTIVE_LOW>;
+			label = "BBRESETOUT";
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		zero-key {
+			gpios = <&pfc 324 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_0>;
+			label = "S16";
+		};
+
+		menu-key {
+			gpios = <&pfc 325 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "S17";
+		};
+
+		home-key {
+			gpios = <&pfc 326 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "S18";
+		};
+
+		back-key {
+			gpios = <&pfc 327 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "S19";
+		};
+
+		volup-key {
+			gpios = <&pfc 328 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "S20";
+		};
+
+		voldown-key {
+			gpios = <&pfc 329 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "S21";
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	vdd_dvfs: max8973@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <
+		/* kHz  uV */
+		1950000 1115000
+		1462500  995000
+	>;
+	voltage-tolerance = <1>; /* 1% */
+};
+
+&cmt1 {
+	status = "okay";
+};
+
+&pfc {
+	scifa0_pins: serial0 {
+		renesas,groups = "scifa0_data";
+		renesas,function = "scifa0";
+	};
+
+	mmc0_pins: mmc {
+		renesas,groups = "mmc0_data8", "mmc0_ctrl";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi1_pins: sd1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+};
+
+&mmcif0 {
+	vmmc-supply = <&vcc_mmc0>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	status = "okay";
+};
+
+&scifa0 {
+	pinctrl-0 = <&scifa0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	vmmc-supply = <&vcc_sdhi0>;
+	bus-width = <4>;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi0_pins>;
+	status = "okay";
+};
+
+&sdhi1 {
+	vmmc-supply = <&ape6evm_fixed_3v3>;
+	bus-width = <4>;
+	broken-cd;
+	toshiba,mmc-wrprotect-disable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi1_pins>;
+	status = "okay";
+};
diff --git a/src/arm/r8a73a4.dtsi b/src/arm/r8a73a4.dtsi
new file mode 100644
index 000000000000..38136d9f6d95
--- /dev/null
+++ b/src/arm/r8a73a4.dtsi
@@ -0,0 +1,380 @@
+/*
+ * Device Tree Source for the r8a73a4 SoC
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a73a4";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	dbsc1: memory-controller@e6790000 {
+		compatible = "renesas,dbsc-r8a73a4";
+		reg = <0 0xe6790000 0 0x10000>;
+	};
+
+	dbsc2: memory-controller@e67a0000 {
+		compatible = "renesas,dbsc-r8a73a4";
+		reg = <0 0xe67a0000 0 0x10000>;
+	};
+
+	dmac: dma-multiplexer {
+		compatible = "renesas,shdma-mux";
+		#dma-cells = <1>;
+		dma-channels = <20>;
+		dma-requests = <256>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dma0: dma-controller@e6700020 {
+			compatible = "renesas,shdma-r8a73a4";
+			reg = <0 0xe6700020 0 0x89e0>;
+			interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+					0 200 IRQ_TYPE_LEVEL_HIGH
+					0 201 IRQ_TYPE_LEVEL_HIGH
+					0 202 IRQ_TYPE_LEVEL_HIGH
+					0 203 IRQ_TYPE_LEVEL_HIGH
+					0 204 IRQ_TYPE_LEVEL_HIGH
+					0 205 IRQ_TYPE_LEVEL_HIGH
+					0 206 IRQ_TYPE_LEVEL_HIGH
+					0 207 IRQ_TYPE_LEVEL_HIGH
+					0 208 IRQ_TYPE_LEVEL_HIGH
+					0 209 IRQ_TYPE_LEVEL_HIGH
+					0 210 IRQ_TYPE_LEVEL_HIGH
+					0 211 IRQ_TYPE_LEVEL_HIGH
+					0 212 IRQ_TYPE_LEVEL_HIGH
+					0 213 IRQ_TYPE_LEVEL_HIGH
+					0 214 IRQ_TYPE_LEVEL_HIGH
+					0 215 IRQ_TYPE_LEVEL_HIGH
+					0 216 IRQ_TYPE_LEVEL_HIGH
+					0 217 IRQ_TYPE_LEVEL_HIGH
+					0 218 IRQ_TYPE_LEVEL_HIGH
+					0 219 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					"ch0", "ch1", "ch2", "ch3",
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19";
+		};
+	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-r8a73a4";
+		reg = <0 0xe6050000 0 0x9000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts-extended =
+			<&irqc0  0 0>, <&irqc0  1 0>, <&irqc0  2 0>, <&irqc0  3 0>,
+			<&irqc0  4 0>, <&irqc0  5 0>, <&irqc0  6 0>, <&irqc0  7 0>,
+			<&irqc0  8 0>, <&irqc0  9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
+			<&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
+			<&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
+			<&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
+			<&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
+			<&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
+			<&irqc1  0 0>, <&irqc1  1 0>, <&irqc1  2 0>, <&irqc1  3 0>,
+			<&irqc1  4 0>, <&irqc1  5 0>, <&irqc1  6 0>, <&irqc1  7 0>,
+			<&irqc1  8 0>, <&irqc1  9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
+			<&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
+			<&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
+			<&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
+			<&irqc1 24 0>, <&irqc1 25 0>;
+	};
+
+	i2c5: i2c@e60b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x428>;
+		interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
+
+		status = "disabled";
+	};
+
+	cmt1: timer@e6130000 {
+		compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+
+		renesas,channels-mask = <0xff>;
+
+		status = "disabled";
+	};
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc-r8a73a4", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	irqc1: interrupt-controller@e61c0200 {
+		compatible = "renesas,irqc-r8a73a4", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0200 0 0x200>;
+		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 49 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 50 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 51 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 57 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	thermal@e61f0000 {
+		compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
+		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
+			 <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
+		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	i2c0: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x428>;
+		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x428>;
+		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6520000 0 0x428>;
+		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6530000 0 0x428>;
+		interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6540000 0 0x428>;
+		interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@e6550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6550000 0 0x428>;
+		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@e6560000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6560000 0 0x428>;
+		interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@e6570000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+		reg = <0 0xe6570000 0 0x428>;
+		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+		reg = <0 0xe6c20000 0 0x100>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+		reg = <0 0xe6c30000 0 0x100>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
+		reg = <0 0xe6c40000 0 0x100>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
+		reg = <0 0xe6c50000 0 0x100>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+		reg = <0 0xe6ce0000 0 0x100>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	scifb3: serial@e6cf0000 {
+		compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+		reg = <0 0xe6cf0000 0 0x100>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	sdhi0: sd@ee100000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee100000 0 0x100>;
+		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: sd@ee120000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee120000 0 0x100>;
+		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sd@ee140000 {
+		compatible = "renesas,sdhi-r8a73a4";
+		reg = <0 0xee140000 0 0x100>;
+		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	mmcif0: mmc@ee200000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmc@ee220000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+};
diff --git a/src/arm/r8a7740-armadillo800eva.dts b/src/arm/r8a7740-armadillo800eva.dts
new file mode 100644
index 000000000000..9bd0cb439f44
--- /dev/null
+++ b/src/arm/r8a7740-armadillo800eva.dts
@@ -0,0 +1,305 @@
+/*
+ * Device Tree Source for the armadillo 800 eva board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7740.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "armadillo 800 eva";
+	compatible = "renesas,armadillo800eva", "renesas,r8a7740";
+
+	aliases {
+		serial1 = &scifa1;
+	};
+
+	chosen {
+		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+		stdout-path = &scifa1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reg_3p3v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sdhi0>;
+
+		enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+		gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
+		states = <3300000 0
+			  1800000 1>;
+
+		enable-active-high;
+	};
+
+	reg_5p0v: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5.0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "SW3";
+			gpio-key,wakeup;
+		};
+
+		back-key {
+			gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "SW4";
+		};
+
+		menu-key {
+			gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "SW5";
+		};
+
+		home-key {
+			gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "SW6";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led3 {
+			gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+		led4 {
+			gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+			label = "LED4";
+		};
+		led5 {
+			gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+			label = "LED5";
+		};
+		led6 {
+			gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+	};
+
+	i2c2: i2c@2 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
+			 &pfc 91 GPIO_ACTIVE_HIGH /* scl */
+			>;
+		i2c-gpio,delay-us = <5>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
+		default-brightness-level = <9>;
+		pinctrl-0 = <&backlight_pins>;
+		pinctrl-names = "default";
+		power-supply = <&reg_5p0v>;
+		enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sh_fsi2 0>;
+			bitclock-inversion;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8978>;
+			bitclock-master;
+			frame-master;
+			system-clock-frequency = <12288000>;
+		};
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&extal1_clk {
+	clock-frequency = <25000000>;
+};
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+&fsibck_clk {
+	clock-frequency = <12288000>;
+};
+&cpg_clocks {
+	renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */
+};
+
+&cmt1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	touchscreen@55 {
+		compatible = "sitronix,st1232";
+		reg = <0x55>;
+		interrupt-parent = <&irqpin1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&st1232_pins>;
+		pinctrl-names = "default";
+		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
+	};
+
+	wm8978: wm8978@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8978";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&pfc {
+	ether_pins: ether {
+		renesas,groups = "gether_mii", "gether_int";
+		renesas,function = "gether";
+	};
+
+	scifa1_pins: serial1 {
+		renesas,groups = "scifa1_data";
+		renesas,function = "scifa1";
+	};
+
+	st1232_pins: touchscreen {
+		renesas,groups = "intc_irq10";
+		renesas,function = "intc";
+	};
+
+	backlight_pins: backlight {
+		renesas,groups = "tpu0_to2_1";
+		renesas,function = "tpu0";
+	};
+
+	mmc0_pins: mmc0 {
+		renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
+		renesas,function = "mmc0";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
+
+	fsia_pins: sounda {
+		renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
+				 "fsia_data_in_1", "fsia_data_out_0";
+		renesas,function = "fsia";
+	};
+};
+
+&tpu {
+	status = "okay";
+};
+
+&mmcif0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&scifa1 {
+	pinctrl-0 = <&scifa1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sh_fsi2 {
+	pinctrl-0 = <&fsia_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&tmu0 {
+	status = "okay";
+};
diff --git a/src/arm/r8a7740.dtsi b/src/arm/r8a7740.dtsi
new file mode 100644
index 000000000000..8a092605d641
--- /dev/null
+++ b/src/arm/r8a7740.dtsi
@@ -0,0 +1,651 @@
+/*
+ * Device Tree Source for the r8a7740 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/r8a7740-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a7740";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0x0>;
+			clock-frequency = <800000000>;
+			power-domains = <&pd_a3sm>;
+		};
+	};
+
+	gic: interrupt-controller@c2800000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xc2800000 0x1000>,
+		      <0xc2000000 0x1000>;
+	};
+
+	dbsc3: memory-controller@fe400000 {
+		compatible = "renesas,dbsc3-r8a7740";
+		reg = <0xfe400000 0x400>;
+		power-domains = <&pd_a4s>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ptm {
+		compatible = "arm,coresight-etm3x";
+		power-domains = <&pd_d4>;
+	};
+
+	cmt1: timer@e6138000 {
+		compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
+		reg = <0xe6138000 0x170>;
+		interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
+		clock-names = "fck";
+		power-domains = <&pd_c5>;
+
+		renesas,channels-mask = <0x3f>;
+
+		status = "disabled";
+	};
+
+	/* irqpin0: IRQ0 - IRQ7 */
+	irqpin0: irqpin@e6900000 {
+		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900000 4>,
+			<0xe6900010 4>,
+			<0xe6900020 1>,
+			<0xe6900040 1>,
+			<0xe6900060 1>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
+	};
+
+	/* irqpin1: IRQ8 - IRQ15 */
+	irqpin1: irqpin@e6900004 {
+		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900004 4>,
+			<0xe6900014 4>,
+			<0xe6900024 1>,
+			<0xe6900044 1>,
+			<0xe6900064 1>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
+	};
+
+	/* irqpin2: IRQ16 - IRQ23 */
+	irqpin2: irqpin@e6900008 {
+		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900008 4>,
+			<0xe6900018 4>,
+			<0xe6900028 1>,
+			<0xe6900048 1>,
+			<0xe6900068 1>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
+	};
+
+	/* irqpin3: IRQ24 - IRQ31 */
+	irqpin3: irqpin@e690000c {
+		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe690000c 4>,
+			<0xe690001c 4>,
+			<0xe690002c 1>,
+			<0xe690004c 1>,
+			<0xe690006c 1>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH
+			      0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
+		power-domains = <&pd_a4s>;
+	};
+
+	ether: ethernet@e9a00000 {
+		compatible = "renesas,gether-r8a7740";
+		reg = <0xe9a00000 0x800>,
+		      <0xe9a01800 0x800>;
+		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
+		power-domains = <&pd_a4s>;
+		phy-mode = "mii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@fff20000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
+		reg = <0xfff20000 0x425>;
+		interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH
+			      0 202 IRQ_TYPE_LEVEL_HIGH
+			      0 203 IRQ_TYPE_LEVEL_HIGH
+			      0 204 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
+		power-domains = <&pd_a4r>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6c20000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
+		reg = <0xe6c20000 0x425>;
+		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH
+			      0 71 IRQ_TYPE_LEVEL_HIGH
+			      0 72 IRQ_TYPE_LEVEL_HIGH
+			      0 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6c40000 0x100>;
+		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6c50000 0x100>;
+		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6c60000 0x100>;
+		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa3: serial@e6c70000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6c70000 0x100>;
+		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
+		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa4: serial@e6c80000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6c80000 0x100>;
+		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
+		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa5: serial@e6cb0000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6cb0000 0x100>;
+		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
+		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa6: serial@e6cc0000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6cc0000 0x100>;
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
+		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifa7: serial@e6cd0000 {
+		compatible = "renesas,scifa-r8a7740", "renesas,scifa";
+		reg = <0xe6cd0000 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
+		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	scifb8: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+		reg = <0xe6c30000 0x100>;
+		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+		clock-names = "sci_ick";
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-r8a7740";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605800c 0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts-extended =
+			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+		power-domains = <&pd_c5>;
+	};
+
+	tpu: pwm@e6600000 {
+		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+		reg = <0xe6600000 0x100>;
+		clocks = <&mstp3_clks R8A7740_CLK_TPU0>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+		#pwm-cells = <3>;
+	};
+
+	mmcif0: mmc@e6bd0000 {
+		compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
+		reg = <0xe6bd0000 0x100>;
+		interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
+			      0 57 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_MMC>;
+		power-domains = <&pd_a3sp>;
+		status = "disabled";
+	};
+
+	sdhi0: sd@e6850000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6850000 0x100>;
+		interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
+			      0 118 IRQ_TYPE_LEVEL_HIGH
+			      0 119 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
+		power-domains = <&pd_a3sp>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
+
+	sdhi1: sd@e6860000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6860000 0x100>;
+		interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
+			      0 122 IRQ_TYPE_LEVEL_HIGH
+			      0 123 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
+		power-domains = <&pd_a3sp>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
+
+	sdhi2: sd@e6870000 {
+		compatible = "renesas,sdhi-r8a7740";
+		reg = <0xe6870000 0x100>;
+		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
+			      0 126 IRQ_TYPE_LEVEL_HIGH
+			      0 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
+		power-domains = <&pd_a3sp>;
+		cap-sd-highspeed;
+		cap-sdio-irq;
+		status = "disabled";
+	};
+
+	sh_fsi2: sound@fe1f0000 {
+		#sound-dai-cells = <1>;
+		compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
+		reg = <0xfe1f0000 0x400>;
+		interrupts = <0 9 0x4>;
+		clocks = <&mstp3_clks R8A7740_CLK_FSI>;
+		power-domains = <&pd_a4mp>;
+		status = "disabled";
+	};
+
+	tmu0: timer@fff80000 {
+		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
+		reg = <0xfff80000 0x2c>;
+		interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 199 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 200 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
+		clock-names = "fck";
+		power-domains = <&pd_a4r>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu1: timer@fff90000 {
+		compatible = "renesas,tmu-r8a7740", "renesas,tmu";
+		reg = <0xfff90000 0x2c>;
+		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 171 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 172 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
+		clock-names = "fck";
+		power-domains = <&pd_a4r>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* External root clock */
+		extalr_clk: extalr_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "extalr";
+		};
+		extal1_clk: extal1_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "extal1";
+		};
+		extal2_clk: extal2_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "extal2";
+		};
+		dv_clk: dv_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <27000000>;
+			clock-output-names = "dv";
+		};
+		fsiack_clk: fsiack_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "fsiack";
+		};
+		fsibck_clk: fsibck_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "fsibck";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a7740-cpg-clocks";
+			reg = <0xe6150000 0x10000>;
+			clocks = <&extal1_clk>, <&extalr_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "system", "pllc0", "pllc1",
+					     "pllc2", "r",
+					     "usb24s",
+					     "i", "zg", "b", "m1", "hp",
+					     "hpp", "usbp", "s", "zb", "m3",
+					     "cp";
+		};
+
+		/* Variable factor clocks (DIV6) */
+		sub_clk: sub_clk@e6150080 {
+			compatible = "renesas,r8a7740-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150080 4>;
+			clocks = <&pllc1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sub";
+		};
+
+		/* Fixed factor clocks */
+		pllc1_div2_clk: pllc1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7740_CLK_PLLC1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "pllc1_div2";
+		};
+		extal1_div2_clk: extal1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal1_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "extal1_div2";
+		};
+
+		/* Gate clocks */
+		subck_clks: subck_clks@e6150080 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150080 4>;
+			clocks = <&sub_clk>, <&sub_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7740_CLK_SUBCK R8A7740_CLK_SUBCK2
+			>;
+			clock-output-names =
+				"subck", "subck2";
+		};
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150134 4>, <0xe6150038 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_S>,
+				 <&cpg_clocks R8A7740_CLK_S>, <&sub_clk>,
+				 <&cpg_clocks R8A7740_CLK_B>,
+				 <&cpg_clocks R8A7740_CLK_HPP>, <&sub_clk>,
+				 <&cpg_clocks R8A7740_CLK_B>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7740_CLK_CEU21 R8A7740_CLK_CEU20 R8A7740_CLK_TMU0
+				R8A7740_CLK_LCDC1 R8A7740_CLK_IIC0 R8A7740_CLK_TMU1
+				R8A7740_CLK_LCDC0
+			>;
+			clock-output-names =
+				"ceu21", "ceu20", "tmu0", "lcdc1", "iic0",
+				"tmu1", "lcdc0";
+		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150138 4>, <0xe6150040 4>;
+			clocks = <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>,
+				 <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA
+				R8A7740_CLK_SCIFA7
+				R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2
+				R8A7740_CLK_DMAC3 R8A7740_CLK_USBDMAC
+				R8A7740_CLK_SCIFA5 R8A7740_CLK_SCIFB
+				R8A7740_CLK_SCIFA0 R8A7740_CLK_SCIFA1
+				R8A7740_CLK_SCIFA2 R8A7740_CLK_SCIFA3
+				R8A7740_CLK_SCIFA4
+			>;
+			clock-output-names =
+				"scifa6", "intca",
+				"scifa7", "dmac1", "dmac2", "dmac3",
+				"usbdmac", "scifa5", "scifb", "scifa0", "scifa1",
+				"scifa2", "scifa3", "scifa4";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe615013c 4>, <0xe6150048 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_R>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&sub_clk>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7740_CLK_CMT1 R8A7740_CLK_FSI R8A7740_CLK_IIC1
+				R8A7740_CLK_USBF R8A7740_CLK_SDHI0 R8A7740_CLK_SDHI1
+				R8A7740_CLK_MMC R8A7740_CLK_GETHER R8A7740_CLK_TPU0
+			>;
+			clock-output-names =
+				"cmt1", "fsi", "iic1", "usbf", "sdhi0", "sdhi1",
+				"mmc", "gether", "tpu0";
+		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150140 4>, <0xe615004c 4>;
+			clocks = <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>,
+				 <&cpg_clocks R8A7740_CLK_HP>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7740_CLK_USBH R8A7740_CLK_SDHI2
+				R8A7740_CLK_USBFUNC R8A7740_CLK_USBPHY
+			>;
+			clock-output-names =
+				"usbhost", "sdhi2", "usbfunc", "usphy";
+		};
+	};
+
+	sysc: system-controller@e6180000 {
+		compatible = "renesas,sysc-r8a7740", "renesas,sysc-rmobile";
+		reg = <0xe6180000 0x8000>, <0xe6188000 0x8000>;
+
+		pm-domains {
+			pd_c5: c5 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <0>;
+
+				pd_a4lc: a4lc@1 {
+					reg = <1>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4mp: a4mp@2 {
+					reg = <2>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_d4: d4@3 {
+					reg = <3>;
+					#power-domain-cells = <0>;
+				};
+
+				pd_a4r: a4r@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3rv: a3rv@6 {
+						reg = <6>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4s: a4s@10 {
+					reg = <10>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <0>;
+
+					pd_a3sp: a3sp@11 {
+						reg = <11>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3sm: a3sm@12 {
+						reg = <12>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_a3sg: a3sg@13 {
+						reg = <13>;
+						#power-domain-cells = <0>;
+					};
+				};
+
+				pd_a4su: a4su@20 {
+					reg = <20>;
+					#power-domain-cells = <0>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/r8a7778-bockw-reference.dts b/src/arm/r8a7778-bockw-reference.dts
new file mode 100644
index 000000000000..04c0c37bb784
--- /dev/null
+++ b/src/arm/r8a7778-bockw-reference.dts
@@ -0,0 +1,139 @@
+/*
+ * Reference Device Tree Source for the Bock-W board
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7778.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "bockw";
+	compatible = "renesas,bockw-reference", "renesas,r8a7778";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
+		stdout-path = &scif0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>;
+	};
+
+	fixedregulator3v3: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	ethernet@18300000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x18300000 0x1000>;
+
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		reg-io-width = <4>;
+		vddvario-supply = <&fixedregulator3v3>;
+		vdd33a-supply = <&fixedregulator3v3>;
+	};
+
+};
+
+&mmcif {
+	pinctrl-0 = <&mmc_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&fixedregulator3v3>;
+	bus-width = <8>;
+	broken-cd;
+	status = "okay";
+};
+
+&irqpin {
+	status = "okay";
+};
+
+&tmu0 {
+	status = "okay";
+};
+
+&pfc {
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data_a", "scif0_ctrl";
+		renesas,function = "scif0";
+	};
+
+	mmc_pins: mmc {
+		renesas,groups = "mmc_data8", "mmc_ctrl";
+		renesas,function = "mmc";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl",
+				  "sdhi0_cd";
+		renesas,function = "sdhi0";
+	};
+
+	hspi0_pins: hspi0 {
+		renesas,groups = "hspi0_a";
+		renesas,function = "hspi0";
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&fixedregulator3v3>;
+	bus-width = <4>;
+	status = "okay";
+	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+};
+
+&hspi0 {
+	pinctrl-0 = <&hspi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl008k";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "data(spi)";
+			reg = <0x00000000 0x00100000>;
+		};
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/src/arm/r8a7778-bockw.dts b/src/arm/r8a7778-bockw.dts
new file mode 100644
index 000000000000..46a884d45175
--- /dev/null
+++ b/src/arm/r8a7778-bockw.dts
@@ -0,0 +1,32 @@
+/*
+ * Reference Device Tree Source for the Bock-W board
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7778.dtsi"
+
+/ {
+	model = "bockw";
+	compatible = "renesas,bockw", "renesas,r8a7778";
+
+	chosen {
+		bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>;
+	};
+};
diff --git a/src/arm/r8a7778.dtsi b/src/arm/r8a7778.dtsi
new file mode 100644
index 000000000000..ef8533910029
--- /dev/null
+++ b/src/arm/r8a7778.dtsi
@@ -0,0 +1,297 @@
+/*
+ * Device Tree Source for Renesas r8a7778
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a7778";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <800000000>;
+		};
+	};
+
+	aliases {
+		spi0 = &hspi0;
+		spi1 = &hspi1;
+		spi2 = &hspi2;
+	};
+
+	gic: interrupt-controller@fe438000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xfe438000 0x1000>,
+		      <0xfe430000 0x100>;
+	};
+
+	/* irqpin: IRQ0 - IRQ3 */
+	irqpin: irqpin@fe78001c {
+		compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		status = "disabled"; /* default off */
+		reg =	<0xfe78001c 4>,
+			<0xfe780010 4>,
+			<0xfe780024 4>,
+			<0xfe780044 4>,
+			<0xfe780064 4>;
+		interrupts =   <0 27 IRQ_TYPE_LEVEL_HIGH
+				0 28 IRQ_TYPE_LEVEL_HIGH
+				0 29 IRQ_TYPE_LEVEL_HIGH
+				0 30 IRQ_TYPE_LEVEL_HIGH>;
+		sense-bitfield-width = <2>;
+	};
+
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc40000 0x2c>;
+		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio1: gpio@ffc41000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc41000 0x2c>;
+		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio2: gpio@ffc42000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc42000 0x2c>;
+		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio3: gpio@ffc43000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc43000 0x2c>;
+		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio4: gpio@ffc44000 {
+		compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+		reg = <0xffc44000 0x2c>;
+		interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 27>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	pfc: pfc@fffc0000 {
+		compatible = "renesas,pfc-r8a7778";
+		reg = <0xfffc0000 0x118>;
+	};
+
+	i2c0: i2c@ffc70000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7778";
+		reg = <0xffc70000 0x1000>;
+		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ffc71000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7778";
+		reg = <0xffc71000 0x1000>;
+		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ffc72000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7778";
+		reg = <0xffc72000 0x1000>;
+		interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ffc73000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7778";
+		reg = <0xffc73000 0x1000>;
+		interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	tmu0: timer@ffd80000 {
+		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+		reg = <0xffd80000 0x30>;
+		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu1: timer@ffd81000 {
+		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+		reg = <0xffd81000 0x30>;
+		interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu2: timer@ffd82000 {
+		compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+		reg = <0xffd82000 0x30>;
+		interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	scif0: serial@ffe40000 {
+		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		reg = <0xffe40000 0x100>;
+		interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	scif1: serial@ffe41000 {
+		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		reg = <0xffe41000 0x100>;
+		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	scif2: serial@ffe42000 {
+		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		reg = <0xffe42000 0x100>;
+		interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	scif3: serial@ffe43000 {
+		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		reg = <0xffe43000 0x100>;
+		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	scif4: serial@ffe44000 {
+		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		reg = <0xffe44000 0x100>;
+		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	scif5: serial@ffe45000 {
+		compatible = "renesas,scif-r8a7778", "renesas,scif";
+		reg = <0xffe45000 0x100>;
+		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	mmcif: mmc@ffe4e000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0xffe4e000 0x100>;
+		interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	sdhi0: sd@ffe4c000 {
+		compatible = "renesas,sdhi-r8a7778";
+		reg = <0xffe4c000 0x100>;
+		interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	sdhi1: sd@ffe4d000 {
+		compatible = "renesas,sdhi-r8a7778";
+		reg = <0xffe4d000 0x100>;
+		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	sdhi2: sd@ffe4f000 {
+		compatible = "renesas,sdhi-r8a7778";
+		reg = <0xffe4f000 0x100>;
+		interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	hspi0: spi@fffc7000 {
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+		reg = <0xfffc7000 0x18>;
+		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	hspi1: spi@fffc8000 {
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+		reg = <0xfffc8000 0x18>;
+		interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	hspi2: spi@fffc6000 {
+		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+		reg = <0xfffc6000 0x18>;
+		interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/r8a7779-marzen.dts b/src/arm/r8a7779-marzen.dts
new file mode 100644
index 000000000000..e83d40e24bcd
--- /dev/null
+++ b/src/arm/r8a7779-marzen.dts
@@ -0,0 +1,229 @@
+/*
+ * Device Tree Source for the Marzen board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7779.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "marzen";
+	compatible = "renesas,marzen", "renesas,r8a7779";
+
+	aliases {
+		serial2 = &scif2;
+		serial4 = &scif4;
+	};
+
+	chosen {
+		bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
+		stdout-path = &scif2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	fixedregulator3v3: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	lan0@18000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x18000000 0x100>;
+		pinctrl-0 = <&lan0_pins>;
+		pinctrl-names = "default";
+
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin0>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		smsc,irq-push-pull;
+		reg-io-width = <4>;
+		vddvario-supply = <&fixedregulator3v3>;
+		vdd33a-supply = <&fixedregulator3v3>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led2 {
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		};
+		led3 {
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		};
+		led4 {
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				vga_enc_in: endpoint {
+					remote-endpoint = <&du_out_rgb0>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				vga_enc_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&vga_enc_out>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "thine,thc63lvdm83d";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds_enc_in: endpoint {
+					remote-endpoint = <&du_out_rgb1>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				lvds_connector: endpoint {
+				};
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&vga_enc_in>;
+			};
+		};
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lvds_enc_in>;
+			};
+		};
+	};
+};
+
+&irqpin0 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <31250000>;
+};
+
+&tmu0 {
+	status = "okay";
+};
+
+&pfc {
+	du_pins: du {
+		du0 {
+			renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
+			renesas,function = "du0";
+		};
+		du1 {
+			renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
+			renesas,function = "du1";
+		};
+	};
+
+	lan0_pins: lan0 {
+		intc {
+			renesas,groups = "intc_irq1_b";
+			renesas,function = "intc";
+		};
+		lbsc {
+			renesas,groups = "lbsc_ex_cs0";
+			renesas,function = "lbsc";
+		};
+	};
+
+	scif2_pins: serial2 {
+		renesas,groups = "scif2_data_c";
+		renesas,function = "scif2";
+	};
+
+	scif4_pins: serial4 {
+		renesas,groups = "scif4_data";
+		renesas,function = "scif4";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd";
+		renesas,function = "sdhi0";
+	};
+
+	hspi0_pins: hspi0 {
+		renesas,groups = "hspi0";
+		renesas,function = "hspi0";
+	};
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif4 {
+	pinctrl-0 = <&scif4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&fixedregulator3v3>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&hspi0 {
+	pinctrl-0 = <&hspi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/src/arm/r8a7779.dtsi b/src/arm/r8a7779.dtsi
new file mode 100644
index 000000000000..5c2219b9f3eb
--- /dev/null
+++ b/src/arm/r8a7779.dtsi
@@ -0,0 +1,549 @@
+/*
+ * Device Tree Source for Renesas r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/r8a7779-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a7779";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			clock-frequency = <1000000000>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	aliases {
+		spi0 = &hspi0;
+		spi1 = &hspi1;
+		spi2 = &hspi2;
+	};
+
+	gic: interrupt-controller@f0001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xf0001000 0x1000>,
+		      <0xf0000100 0x100>;
+	};
+
+	timer@f0000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0xf0000600 0x20>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clocks = <&cpg_clocks R8A7779_CLK_ZS>;
+	};
+
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc40000 0x2c>;
+		interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio1: gpio@ffc41000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc41000 0x2c>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio2: gpio@ffc42000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc42000 0x2c>;
+		interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio3: gpio@ffc43000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc43000 0x2c>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio4: gpio@ffc44000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc44000 0x2c>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio5: gpio@ffc45000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc45000 0x2c>;
+		interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	gpio6: gpio@ffc46000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc46000 0x2c>;
+		interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 9>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	irqpin0: irqpin@fe780010 {
+		compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		status = "disabled";
+		interrupt-controller;
+		reg = <0xfe78001c 4>,
+			<0xfe780010 4>,
+			<0xfe780024 4>,
+			<0xfe780044 4>,
+			<0xfe780064 4>;
+		interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
+			      0 28 IRQ_TYPE_LEVEL_HIGH
+			      0 29 IRQ_TYPE_LEVEL_HIGH
+			      0 30 IRQ_TYPE_LEVEL_HIGH>;
+		sense-bitfield-width = <2>;
+	};
+
+	i2c0: i2c@ffc70000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7779";
+		reg = <0xffc70000 0x1000>;
+		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ffc71000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7779";
+		reg = <0xffc71000 0x1000>;
+		interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ffc72000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7779";
+		reg = <0xffc72000 0x1000>;
+		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ffc73000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7779";
+		reg = <0xffc73000 0x1000>;
+		interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
+		status = "disabled";
+	};
+
+	scif0: serial@ffe40000 {
+		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		reg = <0xffe40000 0x100>;
+		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial@ffe41000 {
+		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		reg = <0xffe41000 0x100>;
+		interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif2: serial@ffe42000 {
+		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		reg = <0xffe42000 0x100>;
+		interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif3: serial@ffe43000 {
+		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		reg = <0xffe43000 0x100>;
+		interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif4: serial@ffe44000 {
+		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		reg = <0xffe44000 0x100>;
+		interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif5: serial@ffe45000 {
+		compatible = "renesas,scif-r8a7779", "renesas,scif";
+		reg = <0xffe45000 0x100>;
+		interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	pfc: pfc@fffc0000 {
+		compatible = "renesas,pfc-r8a7779";
+		reg = <0xfffc0000 0x23c>;
+	};
+
+	thermal@ffc48000 {
+		compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+		reg = <0xffc48000 0x38>;
+	};
+
+	tmu0: timer@ffd80000 {
+		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+		reg = <0xffd80000 0x30>;
+		interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
+		clock-names = "fck";
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu1: timer@ffd81000 {
+		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+		reg = <0xffd81000 0x30>;
+		interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
+		clock-names = "fck";
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	tmu2: timer@ffd82000 {
+		compatible = "renesas,tmu-r8a7779", "renesas,tmu";
+		reg = <0xffd82000 0x30>;
+		interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
+		clock-names = "fck";
+
+		#renesas,channels = <3>;
+
+		status = "disabled";
+	};
+
+	sata: sata@fc600000 {
+		compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
+		reg = <0xfc600000 0x2000>;
+		interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
+	};
+
+	sdhi0: sd@ffe4c000 {
+		compatible = "renesas,sdhi-r8a7779";
+		reg = <0xffe4c000 0x100>;
+		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
+		status = "disabled";
+	};
+
+	sdhi1: sd@ffe4d000 {
+		compatible = "renesas,sdhi-r8a7779";
+		reg = <0xffe4d000 0x100>;
+		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
+		status = "disabled";
+	};
+
+	sdhi2: sd@ffe4e000 {
+		compatible = "renesas,sdhi-r8a7779";
+		reg = <0xffe4e000 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
+		status = "disabled";
+	};
+
+	sdhi3: sd@ffe4f000 {
+		compatible = "renesas,sdhi-r8a7779";
+		reg = <0xffe4f000 0x100>;
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
+		status = "disabled";
+	};
+
+	hspi0: spi@fffc7000 {
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
+		reg = <0xfffc7000 0x18>;
+		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		status = "disabled";
+	};
+
+	hspi1: spi@fffc8000 {
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
+		reg = <0xfffc8000 0x18>;
+		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		status = "disabled";
+	};
+
+	hspi2: spi@fffc6000 {
+		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
+		reg = <0xfffc6000 0x18>;
+		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
+		status = "disabled";
+	};
+
+	du: display@fff80000 {
+		compatible = "renesas,du-r8a7779";
+		reg = <0 0xfff80000 0 0x40000>;
+		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7779_CLK_DU>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb0: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_rgb1: endpoint {
+				};
+			};
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* External root clock */
+		extal_clk: extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overriden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "extal";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: clocks@ffc80000 {
+			compatible = "renesas,r8a7779-cpg-clocks";
+			reg = <0xffc80000 0x30>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "plla", "z", "zs", "s",
+					     "s1", "p", "b", "out";
+		};
+
+		/* Fixed factor clocks */
+		i_clk: i_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "i";
+		};
+		s3_clk: s3_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "s3";
+		};
+		s4_clk: s4_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <16>;
+			clock-mult = <1>;
+			clock-output-names = "s4";
+		};
+		g_clk: g_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7779_CLK_PLLA>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+			clock-output-names = "g";
+		};
+
+		/* Gate clocks */
+		mstp0_clks: clocks@ffc80030 {
+			compatible = "renesas,r8a7779-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0xffc80030 4>;
+			clocks = <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7779_CLK_HSPI R8A7779_CLK_TMU2
+				R8A7779_CLK_TMU1 R8A7779_CLK_TMU0
+				R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0
+				R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4
+				R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2
+				R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0
+				R8A7779_CLK_I2C3 R8A7779_CLK_I2C2
+				R8A7779_CLK_I2C1 R8A7779_CLK_I2C0
+			>;
+			clock-output-names =
+				"hspi", "tmu2", "tmu1", "tmu0", "hscif1",
+				"hscif0", "scif5", "scif4", "scif3", "scif2",
+				"scif1", "scif0", "i2c3", "i2c2", "i2c1",
+				"i2c0";
+		};
+		mstp1_clks: clocks@ffc80034 {
+			compatible = "renesas,r8a7779-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0xffc80034 4>, <0xffc80044 4>;
+			clocks = <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_S>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_P>,
+				 <&cpg_clocks R8A7779_CLK_S>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7779_CLK_USB01 R8A7779_CLK_USB2
+				R8A7779_CLK_DU R8A7779_CLK_VIN2
+				R8A7779_CLK_VIN1 R8A7779_CLK_VIN0
+				R8A7779_CLK_ETHER R8A7779_CLK_SATA
+				R8A7779_CLK_PCIE R8A7779_CLK_VIN3
+			>;
+			clock-output-names =
+				"usb01", "usb2",
+				"du", "vin2",
+				"vin1", "vin0",
+				"ether", "sata",
+				"pcie", "vin3";
+		};
+		mstp3_clks: clocks@ffc8003c {
+			compatible = "renesas,r8a7779-mstp-clocks",
+				     "renesas,cpg-mstp-clocks";
+			reg = <0xffc8003c 4>;
+			clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
+				 <&s4_clk>, <&s4_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2
+				R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0
+				R8A7779_CLK_MMC1 R8A7779_CLK_MMC0
+			>;
+			clock-output-names =
+				"sdhi3", "sdhi2", "sdhi1", "sdhi0",
+				"mmc1", "mmc0";
+		};
+	};
+};
diff --git a/src/arm/r8a7790-lager.dts b/src/arm/r8a7790-lager.dts
new file mode 100644
index 000000000000..0c3b6783b72a
--- /dev/null
+++ b/src/arm/r8a7790-lager.dts
@@ -0,0 +1,599 @@
+/*
+ * Device Tree Source for the Lager board
+ *
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Lager";
+	compatible = "renesas,lager", "renesas,r8a7790";
+
+	aliases {
+		serial0 = &scifa0;
+		serial1 = &scifa1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = &scifa0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@140000000 {
+		device_type = "memory";
+		reg = <1 0x40000000 0 0xc0000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		button@1 {
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+		button@3 {
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+		button@4 {
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		};
+		led7 {
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+		led8 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fixedregulator3v3: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_sdhi0: regulator@1 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi2: regulator@3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator@4 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			system-clock-frequency = <11289600>;
+		};
+	};
+
+	vga-encoder {
+		compatible = "adi,adv7123";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7123_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				adv7123_out: endpoint {
+					remote-endpoint = <&vga_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_in: endpoint {
+				remote-endpoint = <&adv7123_out>;
+			};
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&adv7123_in>;
+			};
+		};
+		port@2 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	du_pins: du {
+		renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
+		renesas,function = "du";
+	};
+
+	scifa0_pins: serial0 {
+		renesas,groups = "scifa0_data";
+		renesas,function = "scifa0";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+
+	scifa1_pins: serial1 {
+		renesas,groups = "scifa1_data";
+		renesas,function = "scifa1";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
+	mmc1_pins: mmc1 {
+		renesas,groups = "mmc1_data8", "mmc1_ctrl";
+		renesas,function = "mmc1";
+	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
+	msiof1_pins: spi2 {
+		renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
+				 "msiof1_tx";
+		renesas,function = "msiof1";
+	};
+
+	iic1_pins: iic1 {
+		renesas,groups = "iic1";
+		renesas,function = "iic1";
+	};
+
+	iic2_pins: iic2 {
+		renesas,groups = "iic2";
+		renesas,function = "iic2";
+	};
+
+	iic3_pins: iic3 {
+		renesas,groups = "iic3";
+		renesas,function = "iic3";
+	};
+
+	hsusb_pins: hsusb {
+		renesas,groups = "usb0_ovc_vbus";
+		renesas,function = "usb0";
+	};
+
+	usb0_pins: usb0 {
+		renesas,groups = "usb0";
+		renesas,function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
+
+	usb2_pins: usb2 {
+		renesas,groups = "usb2";
+		renesas,function = "usb2";
+	};
+
+	vin1_pins: vin {
+		renesas,groups = "vin1_data8", "vin1_clk";
+		renesas,function = "vin1";
+	};
+
+	sound_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		renesas,groups = "audio_clk_a";
+		renesas,function = "audio_clk";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&mmcif1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&fixedregulator3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpha;
+		spi-cpol;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "loader";
+			reg = <0x00000000 0x00040000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "user";
+			reg = <0x00040000 0x00400000>;
+			read-only;
+		};
+		partition@440000 {
+			label = "flash";
+			reg = <0x00440000 0x03bc0000>;
+		};
+	};
+};
+
+&scifa0 {
+	pinctrl-0 = <&scifa0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scifa1 {
+	pinctrl-0 = <&scifa1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic: pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+&iic0	{
+	status = "okay";
+};
+
+&iic1	{
+	status = "okay";
+	pinctrl-0 = <&iic1_pins>;
+	pinctrl-names = "default";
+};
+
+&iic2	{
+	status = "okay";
+	pinctrl-0 = <&iic2_pins>;
+	pinctrl-names = "default";
+
+	clock-frequency = <100000>;
+
+	ak4643: sound-codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin1>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin1ep0>;
+			};
+		};
+	};
+};
+
+&iic3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&iic3_pins>;
+	status = "okay";
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&xhci {
+	status = "okay";
+	pinctrl-0 = <&usb2_pins>;
+	pinctrl-names = "default";
+};
+
+&pci2 {
+	status = "okay";
+	pinctrl-0 = <&usb2_pins>;
+	pinctrl-names = "default";
+};
+
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&hsusb_pins>;
+	pinctrl-names = "default";
+	renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+	status = "okay";
+};
+
+/* composite video input */
+&vin1 {
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin1ep0: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/src/arm/r8a7790.dtsi b/src/arm/r8a7790.dtsi
new file mode 100644
index 000000000000..4b38fc920114
--- /dev/null
+++ b/src/arm/r8a7790.dtsi
@@ -0,0 +1,1468 @@
+/*
+ * Device Tree Source for the r8a7790 SoC
+ *
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7790-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a7790";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &iic0;
+		i2c5 = &iic1;
+		i2c6 = &iic2;
+		i2c7 = &iic3;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		spi3 = &msiof2;
+		spi4 = &msiof3;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
+		vin3 = &vin3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1300000000>;
+			voltage-tolerance = <1>; /* 1% */
+			clocks = <&cpg_clocks R8A7790_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+			clock-frequency = <1300000000>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu5: cpu@5 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu6: cpu@6 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <780000000>;
+		};
+
+		cpu7: cpu@7 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <780000000>;
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	gpio0: gpio@e6050000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xe6050000 0 0x50>;
+		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
+	};
+
+	gpio1: gpio@e6051000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xe6051000 0 0x50>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
+	};
+
+	gpio2: gpio@e6052000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xe6052000 0 0x50>;
+		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
+	};
+
+	gpio3: gpio@e6053000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xe6053000 0 0x50>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
+	};
+
+	gpio4: gpio@e6054000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xe6054000 0 0x50>;
+		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
+	};
+
+	gpio5: gpio@e6055000 {
+		compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+		reg = <0 0xe6055000 0 0x50>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
+	};
+
+	thermal@e61f0000 {
+		compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
+		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	cmt0: timer@ffca0000 {
+		compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0x60>;
+
+		status = "disabled";
+	};
+
+	cmt1: timer@e6130000 {
+		compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0xff>;
+
+		status = "disabled";
+	};
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc-r8a7790", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 3 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	dmac0: dma-controller@e6700000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6700000 0 0x20000>;
+		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+			      0 200 IRQ_TYPE_LEVEL_HIGH
+			      0 201 IRQ_TYPE_LEVEL_HIGH
+			      0 202 IRQ_TYPE_LEVEL_HIGH
+			      0 203 IRQ_TYPE_LEVEL_HIGH
+			      0 204 IRQ_TYPE_LEVEL_HIGH
+			      0 205 IRQ_TYPE_LEVEL_HIGH
+			      0 206 IRQ_TYPE_LEVEL_HIGH
+			      0 207 IRQ_TYPE_LEVEL_HIGH
+			      0 208 IRQ_TYPE_LEVEL_HIGH
+			      0 209 IRQ_TYPE_LEVEL_HIGH
+			      0 210 IRQ_TYPE_LEVEL_HIGH
+			      0 211 IRQ_TYPE_LEVEL_HIGH
+			      0 212 IRQ_TYPE_LEVEL_HIGH
+			      0 213 IRQ_TYPE_LEVEL_HIGH
+			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	dmac1: dma-controller@e6720000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6720000 0 0x20000>;
+		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+			      0 216 IRQ_TYPE_LEVEL_HIGH
+			      0 217 IRQ_TYPE_LEVEL_HIGH
+			      0 218 IRQ_TYPE_LEVEL_HIGH
+			      0 219 IRQ_TYPE_LEVEL_HIGH
+			      0 308 IRQ_TYPE_LEVEL_HIGH
+			      0 309 IRQ_TYPE_LEVEL_HIGH
+			      0 310 IRQ_TYPE_LEVEL_HIGH
+			      0 311 IRQ_TYPE_LEVEL_HIGH
+			      0 312 IRQ_TYPE_LEVEL_HIGH
+			      0 313 IRQ_TYPE_LEVEL_HIGH
+			      0 314 IRQ_TYPE_LEVEL_HIGH
+			      0 315 IRQ_TYPE_LEVEL_HIGH
+			      0 316 IRQ_TYPE_LEVEL_HIGH
+			      0 317 IRQ_TYPE_LEVEL_HIGH
+			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	audma0: dma-controller@ec700000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xec700000 0 0x10000>;
+		interrupts =	<0 346 IRQ_TYPE_LEVEL_HIGH
+				 0 320 IRQ_TYPE_LEVEL_HIGH
+				 0 321 IRQ_TYPE_LEVEL_HIGH
+				 0 322 IRQ_TYPE_LEVEL_HIGH
+				 0 323 IRQ_TYPE_LEVEL_HIGH
+				 0 324 IRQ_TYPE_LEVEL_HIGH
+				 0 325 IRQ_TYPE_LEVEL_HIGH
+				 0 326 IRQ_TYPE_LEVEL_HIGH
+				 0 327 IRQ_TYPE_LEVEL_HIGH
+				 0 328 IRQ_TYPE_LEVEL_HIGH
+				 0 329 IRQ_TYPE_LEVEL_HIGH
+				 0 330 IRQ_TYPE_LEVEL_HIGH
+				 0 331 IRQ_TYPE_LEVEL_HIGH
+				 0 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
+	audma1: dma-controller@ec720000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xec720000 0 0x10000>;
+		interrupts =	<0 347 IRQ_TYPE_LEVEL_HIGH
+				 0 333 IRQ_TYPE_LEVEL_HIGH
+				 0 334 IRQ_TYPE_LEVEL_HIGH
+				 0 335 IRQ_TYPE_LEVEL_HIGH
+				 0 336 IRQ_TYPE_LEVEL_HIGH
+				 0 337 IRQ_TYPE_LEVEL_HIGH
+				 0 338 IRQ_TYPE_LEVEL_HIGH
+				 0 339 IRQ_TYPE_LEVEL_HIGH
+				 0 340 IRQ_TYPE_LEVEL_HIGH
+				 0 341 IRQ_TYPE_LEVEL_HIGH
+				 0 342 IRQ_TYPE_LEVEL_HIGH
+				 0 343 IRQ_TYPE_LEVEL_HIGH
+				 0 344 IRQ_TYPE_LEVEL_HIGH
+				 0 345 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
+	audmapp: dma-controller@ec740000 {
+		compatible = "renesas,rcar-audmapp";
+		#dma-cells = <1>;
+
+		reg = <0 0xec740000 0 0x200>;
+	};
+
+	i2c0: i2c@e6508000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6508000 0 0x40>;
+		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6518000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6518000 0 0x40>;
+		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6530000 0 0x40>;
+		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7790";
+		reg = <0 0xe6540000 0 0x40>;
+		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
+		status = "disabled";
+	};
+
+	iic0: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	iic1: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x425>;
+		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	iic2: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe6520000 0 0x425>;
+		interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
+		dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	iic3: i2c@e60b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x425>;
+		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	mmcif0: mmc@ee200000 {
+		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+		dma-names = "tx", "rx";
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmc@ee220000 {
+		compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
+		dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
+		dma-names = "tx", "rx";
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	pfc: pfc@e6060000 {
+		compatible = "renesas,pfc-r8a7790";
+		reg = <0 0xe6060000 0 0x250>;
+	};
+
+	sdhi0: sd@ee100000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee100000 0 0x200>;
+		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
+		status = "disabled";
+	};
+
+	sdhi1: sd@ee120000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee120000 0 0x200>;
+		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
+		status = "disabled";
+	};
+
+	sdhi2: sd@ee140000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee140000 0 0x100>;
+		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
+		status = "disabled";
+	};
+
+	sdhi3: sd@ee160000 {
+		compatible = "renesas,sdhi-r8a7790";
+		reg = <0 0xee160000 0 0x100>;
+		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
+		status = "disabled";
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		reg = <0 0xe6c40000 0 64>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif0: serial@e6e60000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial@e6e68000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif0: serial@e62c0000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif1: serial@e62c8000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	ether: ethernet@ee700000 {
+		compatible = "renesas,ether-r8a7790";
+		reg = <0 0xee700000 0 0x400>;
+		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+		phy-mode = "rmii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	sata0: sata@ee300000 {
+		compatible = "renesas,sata-r8a7790";
+		reg = <0 0xee300000 0 0x2000>;
+		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
+		status = "disabled";
+	};
+
+	sata1: sata@ee500000 {
+		compatible = "renesas,sata-r8a7790";
+		reg = <0 0xee500000 0 0x2000>;
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
+		status = "disabled";
+	};
+
+	hsusb: usb@e6590000 {
+		compatible = "renesas,usbhs-r8a7790";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@e6590100 {
+		compatible = "renesas,usb-phy-r8a7790";
+		reg = <0 0xe6590100 0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+		clock-names = "usbhs";
+		status = "disabled";
+
+		usb0: usb-channel@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+		usb2: usb-channel@2 {
+			reg = <2>;
+			#phy-cells = <1>;
+		};
+	};
+
+	vin0: video@e6ef0000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin1: video@e6ef1000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin2: video@e6ef2000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
+		reg = <0 0xe6ef2000 0 0x1000>;
+		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin3: video@e6ef3000 {
+		compatible = "renesas,vin-r8a7790";
+		clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
+		reg = <0 0xe6ef3000 0 0x1000>;
+		interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vsp1@fe920000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe920000 0 0x8000>;
+		interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
+
+		renesas,has-sru;
+		renesas,#rpf = <5>;
+		renesas,#uds = <1>;
+		renesas,#wpf = <4>;
+	};
+
+	vsp1@fe928000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe928000 0 0x8000>;
+		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+
+		renesas,has-lut;
+		renesas,has-sru;
+		renesas,#rpf = <5>;
+		renesas,#uds = <3>;
+		renesas,#wpf = <4>;
+	};
+
+	vsp1@fe930000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe930000 0 0x8000>;
+		interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
+
+		renesas,has-lif;
+		renesas,has-lut;
+		renesas,#rpf = <4>;
+		renesas,#uds = <1>;
+		renesas,#wpf = <4>;
+	};
+
+	vsp1@fe938000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe938000 0 0x8000>;
+		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
+
+		renesas,has-lif;
+		renesas,has-lut;
+		renesas,#rpf = <4>;
+		renesas,#uds = <1>;
+		renesas,#wpf = <4>;
+	};
+
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7790";
+		reg = <0 0xfeb00000 0 0x70000>,
+		      <0 0xfeb90000 0 0x1c>,
+		      <0 0xfeb94000 0 0x1c>;
+		reg-names = "du", "lvds.0", "lvds.1";
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 269 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+			 <&mstp7_clks R8A7790_CLK_DU1>,
+			 <&mstp7_clks R8A7790_CLK_DU2>,
+			 <&mstp7_clks R8A7790_CLK_LVDS0>,
+			 <&mstp7_clks R8A7790_CLK_LVDS1>;
+		clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_lvds0: endpoint {
+				};
+			};
+			port@2 {
+				reg = <2>;
+				du_out_lvds1: endpoint {
+				};
+			};
+		};
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* External root clock */
+		extal_clk: extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overriden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "extal";
+		};
+
+		/* External PCIe clock - can be overridden by the board */
+		pcie_bus_clk: pcie_bus_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <100000000>;
+			clock-output-names = "pcie_bus";
+			status = "disabled";
+		};
+
+		/*
+		 * The external audio clocks are configured as 0 Hz fixed frequency clocks by
+		 * default. Boards that provide audio clocks should override them.
+		 */
+		audio_clk_a: audio_clk_a {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_a";
+		};
+		audio_clk_b: audio_clk_b {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_b";
+		};
+		audio_clk_c: audio_clk_c {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_c";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a7790-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "sdh", "sd0", "sd1",
+					     "z";
+		};
+
+		/* Variable factor clocks */
+		sd2_clk: sd2_clk@e6150078 {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150078 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd2";
+		};
+		sd3_clk: sd3_clk@e615026c {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615026c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd3";
+		};
+		mmc0_clk: mmc0_clk@e6150240 {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150240 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "mmc0";
+		};
+		mmc1_clk: mmc1_clk@e6150244 {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150244 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "mmc1";
+		};
+		ssp_clk: ssp_clk@e6150248 {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150248 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "ssp";
+		};
+		ssprs_clk: ssprs_clk@e615024c {
+			compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615024c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "ssprs";
+		};
+
+		/* Fixed factor clocks */
+		pll1_div2_clk: pll1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "pll1_div2";
+		};
+		z2_clk: z2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "z2";
+		};
+		zg_clk: zg_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+			clock-output-names = "zg";
+		};
+		zx_clk: zx_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+			clock-output-names = "zx";
+		};
+		zs_clk: zs_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+			clock-output-names = "zs";
+		};
+		hp_clk: hp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "hp";
+		};
+		i_clk: i_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "i";
+		};
+		b_clk: b_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "b";
+		};
+		p_clk: p_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+			clock-output-names = "p";
+		};
+		cl_clk: cl_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <48>;
+			clock-mult = <1>;
+			clock-output-names = "cl";
+		};
+		m2_clk: m2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "m2";
+		};
+		imp_clk: imp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clock-output-names = "imp";
+		};
+		rclk_clk: rclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(48 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "rclk";
+		};
+		oscclk_clk: oscclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(12 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "oscclk";
+		};
+		zb3_clk: zb3_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clock-output-names = "zb3";
+		};
+		zb3d2_clk: zb3d2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "zb3d2";
+		};
+		ddr_clk: ddr_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "ddr";
+		};
+		mp_clk: mp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <15>;
+			clock-mult = <1>;
+			clock-output-names = "mp";
+		};
+		cp_clk: cp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "cp";
+		};
+
+		/* Gate clocks */
+		mstp0_clks: mstp0_clks@e6150130 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
+			clocks = <&mp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7790_CLK_MSIOF0>;
+			clock-output-names = "msiof0";
+		};
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&m2_clk>,
+				 <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, <&zs_clk>,
+				 <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+				 <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1
+				R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1
+				R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC
+				R8A7790_CLK_FDP1_2 R8A7790_CLK_FDP1_1 R8A7790_CLK_FDP1_0
+				R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0
+				R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0
+				R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
+			>;
+			clock-output-names =
+				"vcp1", "vcp0", "vpc1", "vpc0", "jpu", "ssp1",
+				"tmu1", "3dg", "2ddmac", "fdp1-2", "fdp1-1",
+				"fdp1-0", "tmu3", "tmu2", "cmt0", "tmu0",
+				"vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy";
+		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+				 <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>,
+				 <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0
+				R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1
+				R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2
+				R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0
+			>;
+			clock-output-names =
+				"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
+				"scifb1", "msiof1", "msiof3", "scifb2",
+				"sys-dmac1", "sys-dmac0";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
+				 <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
+				 <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
+				 <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
+				R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
+				R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
+				R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1
+			>;
+			clock-output-names =
+				"iic2", "tpu0", "mmcif1", "sdhi3",
+				"sdhi2", "sdhi1", "sdhi0", "mmcif0",
+				"iic0", "pciec", "iic1", "ssusb", "cmt1",
+				"usbdmac0", "usbdmac1";
+		};
+		mstp5_clks: mstp5_clks@e6150144 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+			clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1
+				R8A7790_CLK_THERMAL R8A7790_CLK_PWM
+			>;
+			clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
+		};
+		mstp7_clks: mstp7_clks@e615014c {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+				 <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>,
+				 <&zx_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1
+				R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0
+				R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0
+				R8A7790_CLK_LVDS1 R8A7790_CLK_LVDS0
+			>;
+			clock-output-names =
+				"ehci", "hsusb", "hscif1", "hscif0", "scif1",
+				"scif0", "du2", "du1", "du0", "lvds1", "lvds0";
+		};
+		mstp8_clks: mstp8_clks@e6150990 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+			clocks = <&hp_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>,
+			         <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7790_CLK_MLB R8A7790_CLK_VIN3 R8A7790_CLK_VIN2
+				R8A7790_CLK_VIN1 R8A7790_CLK_VIN0 R8A7790_CLK_ETHER
+				R8A7790_CLK_SATA1 R8A7790_CLK_SATA0
+			>;
+			clock-output-names =
+				"mlb", "vin3", "vin2", "vin1", "vin0", "ether",
+				"sata1", "sata0";
+		};
+		mstp9_clks: mstp9_clks@e6150994 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>,
+				 <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3
+				R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0
+				R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS
+				R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0
+			>;
+			clock-output-names =
+				"gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
+				"rcan1", "rcan0", "qspi_mod", "iic3",
+				"i2c3", "i2c2", "i2c1", "i2c0";
+		};
+		mstp10_clks: mstp10_clks@e6150998 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+			clocks = <&p_clk>,
+				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&p_clk>,
+				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>;
+
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7790_CLK_SSI_ALL
+				R8A7790_CLK_SSI9 R8A7790_CLK_SSI8 R8A7790_CLK_SSI7 R8A7790_CLK_SSI6 R8A7790_CLK_SSI5
+				R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0
+				R8A7790_CLK_SCU_ALL
+				R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0
+				R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5
+				R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0
+			>;
+			clock-output-names =
+				"ssi-all",
+				"ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
+				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
+				"scu-all",
+				"scu-dvc1", "scu-dvc0",
+				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
+				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
+		};
+	};
+
+	qspi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7790", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+		dma-names = "tx", "rx";
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof0: spi@e6e20000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
+		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
+		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof1: spi@e6e10000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
+		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
+		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof2: spi@e6e00000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
+		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
+		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof3: spi@e6c90000 {
+		compatible = "renesas,msiof-r8a7790";
+		reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>;
+		interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
+		dmas = <&dmac0 0x45>, <&dmac0 0x46>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	xhci: usb@ee000000 {
+		compatible = "renesas,xhci-r8a7790";
+		reg = <0 0xee000000 0 0xc00>;
+		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+		phys = <&usb2 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	pci0: pci@ee090000 {
+		compatible = "renesas,pci-r8a7790";
+		device_type = "pci";
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		reg = <0 0xee090000 0 0xc00>,
+		      <0 0xee080000 0 0x1100>;
+		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		bus-range = <0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
+
+		usb@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
+	};
+
+	pci1: pci@ee0b0000 {
+		compatible = "renesas,pci-r8a7790";
+		device_type = "pci";
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		reg = <0 0xee0b0000 0 0xc00>,
+		      <0 0xee0a0000 0 0x1100>;
+		interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		bus-range = <1 1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pci2: pci@ee0d0000 {
+		compatible = "renesas,pci-r8a7790";
+		device_type = "pci";
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		reg = <0 0xee0d0000 0 0xc00>,
+		      <0 0xee0c0000 0 0x1100>;
+		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		bus-range = <2 2>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
+
+		usb@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
+	};
+
+	pciec: pcie@fe000000 {
+		compatible = "renesas,pcie-r8a7790";
+		reg = <0 0xfe000000 0 0x80000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x00 0xff>;
+		device_type = "pci";
+		ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+			  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+			  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+			  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+		/* Map all possible DDR as inbound ranges */
+		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
+			      0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+		interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
+		clock-names = "pcie", "pcie_bus";
+		status = "disabled";
+	};
+
+	rcar_sound: rcar_sound@ec500000 {
+		/*
+		 * #sound-dai-cells is required
+		 *
+		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+		 */
+		compatible =  "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2";
+		reg =	<0 0xec500000 0 0x1000>, /* SCU */
+			<0 0xec5a0000 0 0x100>,  /* ADG */
+			<0 0xec540000 0 0x1000>, /* SSIU */
+			<0 0xec541000 0 0x1280>; /* SSI */
+		clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+			<&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
+			<&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
+			<&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
+			<&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
+			<&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
+			<&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
+			<&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
+			<&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
+			<&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
+			<&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
+			<&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
+			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
+		clock-names = "ssi-all",
+				"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+				"src.9", "src.8", "src.7", "src.6", "src.5",
+				"src.4", "src.3", "src.2", "src.1", "src.0",
+				"dvc.0", "dvc.1",
+				"clk_a", "clk_b", "clk_c", "clk_i";
+
+		status = "disabled";
+
+		rcar_sound,dvc {
+			dvc0: dvc@0 { };
+			dvc1: dvc@1 { };
+		};
+
+		rcar_sound,src {
+			src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; };
+			src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; };
+			src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; };
+			src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; };
+			src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; };
+			src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; };
+			src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; };
+			src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; };
+			src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; };
+			src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; };
+		};
+
+		rcar_sound,ssi {
+			ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; };
+		};
+	};
+};
diff --git a/src/arm/r8a7791-henninger.dts b/src/arm/r8a7791-henninger.dts
new file mode 100644
index 000000000000..d2ebf11f9881
--- /dev/null
+++ b/src/arm/r8a7791-henninger.dts
@@ -0,0 +1,309 @@
+/*
+ * Device Tree Source for the Henninger board
+ *
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Henninger";
+	compatible = "renesas,henninger", "renesas,r8a7791";
+
+	aliases {
+		serial0 = &scif0;
+	};
+
+	chosen {
+		bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = &scif0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	vcc_sdhi0: regulator@0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator@1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi2: regulator@2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vccq_sdhi2: regulator@3 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data_d";
+		renesas,function = "scif0";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2";
+		renesas,function = "i2c2";
+	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
+	msiof0_pins: spi1 {
+		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+				 "msiof0_tx";
+		renesas,function = "msiof0";
+	};
+
+	usb0_pins: usb0 {
+		renesas,groups = "usb0";
+		renesas,function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
+
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data8", "vin0_clk";
+		renesas,function = "vin0";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin0>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin0ep>;
+			};
+		};
+	};
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "loader_prg";
+			reg = <0x00000000 0x00040000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "user_prg";
+			reg = <0x00040000 0x00400000>;
+			read-only;
+		};
+		partition@440000 {
+			label = "flash_fs";
+			reg = <0x00440000 0x03bc0000>;
+		};
+	};
+};
+
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+/* composite video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
diff --git a/src/arm/r8a7791-koelsch.dts b/src/arm/r8a7791-koelsch.dts
new file mode 100644
index 000000000000..a3c27807f6c5
--- /dev/null
+++ b/src/arm/r8a7791-koelsch.dts
@@ -0,0 +1,602 @@
+/*
+ * Device Tree Source for the Koelsch board
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ *      2: CN22
+ *      3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ *	amixer set "DVC Out" 100%
+ *	amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *	amixer set "DVC Out Mute" on
+ *	amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *	amixer set "DVC Out Ramp" on
+ *	aplay xxx.wav &
+ *	amixer set "DVC Out"  80%  // Volume Down
+ *	amixer set "DVC Out" 100%  // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7791.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Koelsch";
+	compatible = "renesas,koelsch", "renesas,r8a7791";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = &scif0;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "SW2-1";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "SW2-2";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "SW2-3";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "SW2-4";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-a {
+			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_A>;
+			label = "SW30";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-b {
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_B>;
+			label = "SW31";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-c {
+			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_C>;
+			label = "SW32";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-d {
+			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_D>;
+			label = "SW33";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-e {
+			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_E>;
+			label = "SW34";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-f {
+			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F>;
+			label = "SW35";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+		key-g {
+			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_G>;
+			label = "SW36";
+			gpio-key,wakeup;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			label = "LED6";
+		};
+		led7 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			label = "LED7";
+		};
+		led8 {
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			label = "LED8";
+		};
+	};
+
+	vcc_sdhi0: regulator@0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator@1 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi1: regulator@2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi1: regulator@3 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	vcc_sdhi2: regulator@4 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi2: regulator@5 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			system-clock-frequency = <11289600>;
+		};
+	};
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2";
+		renesas,function = "i2c2";
+	};
+
+	du_pins: du {
+		renesas,groups = "du_rgb666", "du_sync", "du_clk_out_0";
+		renesas,function = "du";
+	};
+
+	scif0_pins: serial0 {
+		renesas,groups = "scif0_data_d";
+		renesas,function = "scif0";
+	};
+
+	scif1_pins: serial1 {
+		renesas,groups = "scif1_data_d";
+		renesas,function = "scif1";
+	};
+
+	ether_pins: ether {
+		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
+		renesas,function = "eth";
+	};
+
+	phy1_pins: phy1 {
+		renesas,groups = "intc_irq0";
+		renesas,function = "intc";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi1_pins: sd1 {
+		renesas,groups = "sdhi1_data4", "sdhi1_ctrl";
+		renesas,function = "sdhi1";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
+	msiof0_pins: spi1 {
+		renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
+				 "msiof0_tx";
+		renesas,function = "msiof0";
+	};
+
+	usb0_pins: usb0 {
+		renesas,groups = "usb0";
+		renesas,function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		renesas,groups = "usb1";
+		renesas,function = "usb1";
+	};
+
+	vin1_pins: vin1 {
+		renesas,groups = "vin1_data8", "vin1_clk";
+		renesas,function = "vin1";
+	};
+
+	sound_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		renesas,groups = "audio_clk_a";
+		renesas,function = "audio_clk";
+	};
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins &phy1_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi0>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi1>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		spi-cpha;
+		spi-cpol;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "loader";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+		partition@80000 {
+			label = "user";
+			reg = <0x00080000 0x00580000>;
+			read-only;
+		};
+		partition@600000 {
+			label = "flash";
+			reg = <0x00600000 0x03a00000>;
+		};
+	};
+};
+
+&msiof0 {
+	pinctrl-0 = <&msiof0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	pmic: pmic@0 {
+		compatible = "renesas,r2a11302ft";
+		reg = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	ak4643: sound-codec@12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
+	composite-in@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin1>;
+
+		port {
+			adv7180: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin1ep>;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "renesas,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
+
+&pci1 {
+	status = "okay";
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+};
+
+&hsusb {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	status = "okay";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
+/* composite video input */
+&vin1 {
+	status = "okay";
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin1ep: endpoint {
+			remote-endpoint = <&adv7180>;
+			bus-width = <8>;
+		};
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src2 &dvc0>;
+			capture  = <&ssi1 &src3 &dvc1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};
diff --git a/src/arm/r8a7791.dtsi b/src/arm/r8a7791.dtsi
new file mode 100644
index 000000000000..e35812a0d8d4
--- /dev/null
+++ b/src/arm/r8a7791.dtsi
@@ -0,0 +1,1453 @@
+/*
+ * Device Tree Source for the r8a7791 SoC
+ *
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
+ * Copyright (C) 2013-2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7791-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a7791";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		spi0 = &qspi;
+		spi1 = &msiof0;
+		spi2 = &msiof1;
+		spi3 = &msiof2;
+		vin0 = &vin0;
+		vin1 = &vin1;
+		vin2 = &vin2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1500000000>;
+			voltage-tolerance = <1>; /* 1% */
+			clocks = <&cpg_clocks R8A7791_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1500000000>;
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	gpio0: gpio@e6050000 {
+		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		reg = <0 0xe6050000 0 0x50>;
+		interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
+	};
+
+	gpio1: gpio@e6051000 {
+		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		reg = <0 0xe6051000 0 0x50>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
+	};
+
+	gpio2: gpio@e6052000 {
+		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		reg = <0 0xe6052000 0 0x50>;
+		interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
+	};
+
+	gpio3: gpio@e6053000 {
+		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		reg = <0 0xe6053000 0 0x50>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
+	};
+
+	gpio4: gpio@e6054000 {
+		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		reg = <0 0xe6054000 0 0x50>;
+		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 128 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
+	};
+
+	gpio5: gpio@e6055000 {
+		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		reg = <0 0xe6055000 0 0x50>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
+	};
+
+	gpio6: gpio@e6055400 {
+		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		reg = <0 0xe6055400 0 0x50>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 32>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
+	};
+
+	gpio7: gpio@e6055800 {
+		compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
+		reg = <0 0xe6055800 0 0x50>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 224 26>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
+	};
+
+	thermal@e61f0000 {
+		compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
+		reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	cmt0: timer@ffca0000 {
+		compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0x60>;
+
+		status = "disabled";
+	};
+
+	cmt1: timer@e6130000 {
+		compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0xff>;
+
+		status = "disabled";
+	};
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc-r8a7791", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	dmac0: dma-controller@e6700000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6700000 0 0x20000>;
+		interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+			      0 200 IRQ_TYPE_LEVEL_HIGH
+			      0 201 IRQ_TYPE_LEVEL_HIGH
+			      0 202 IRQ_TYPE_LEVEL_HIGH
+			      0 203 IRQ_TYPE_LEVEL_HIGH
+			      0 204 IRQ_TYPE_LEVEL_HIGH
+			      0 205 IRQ_TYPE_LEVEL_HIGH
+			      0 206 IRQ_TYPE_LEVEL_HIGH
+			      0 207 IRQ_TYPE_LEVEL_HIGH
+			      0 208 IRQ_TYPE_LEVEL_HIGH
+			      0 209 IRQ_TYPE_LEVEL_HIGH
+			      0 210 IRQ_TYPE_LEVEL_HIGH
+			      0 211 IRQ_TYPE_LEVEL_HIGH
+			      0 212 IRQ_TYPE_LEVEL_HIGH
+			      0 213 IRQ_TYPE_LEVEL_HIGH
+			      0 214 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	dmac1: dma-controller@e6720000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xe6720000 0 0x20000>;
+		interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+			      0 216 IRQ_TYPE_LEVEL_HIGH
+			      0 217 IRQ_TYPE_LEVEL_HIGH
+			      0 218 IRQ_TYPE_LEVEL_HIGH
+			      0 219 IRQ_TYPE_LEVEL_HIGH
+			      0 308 IRQ_TYPE_LEVEL_HIGH
+			      0 309 IRQ_TYPE_LEVEL_HIGH
+			      0 310 IRQ_TYPE_LEVEL_HIGH
+			      0 311 IRQ_TYPE_LEVEL_HIGH
+			      0 312 IRQ_TYPE_LEVEL_HIGH
+			      0 313 IRQ_TYPE_LEVEL_HIGH
+			      0 314 IRQ_TYPE_LEVEL_HIGH
+			      0 315 IRQ_TYPE_LEVEL_HIGH
+			      0 316 IRQ_TYPE_LEVEL_HIGH
+			      0 317 IRQ_TYPE_LEVEL_HIGH
+			      0 318 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12", "ch13", "ch14";
+		clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <15>;
+	};
+
+	audma0: dma-controller@ec700000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xec700000 0 0x10000>;
+		interrupts =	<0 346 IRQ_TYPE_LEVEL_HIGH
+				 0 320 IRQ_TYPE_LEVEL_HIGH
+				 0 321 IRQ_TYPE_LEVEL_HIGH
+				 0 322 IRQ_TYPE_LEVEL_HIGH
+				 0 323 IRQ_TYPE_LEVEL_HIGH
+				 0 324 IRQ_TYPE_LEVEL_HIGH
+				 0 325 IRQ_TYPE_LEVEL_HIGH
+				 0 326 IRQ_TYPE_LEVEL_HIGH
+				 0 327 IRQ_TYPE_LEVEL_HIGH
+				 0 328 IRQ_TYPE_LEVEL_HIGH
+				 0 329 IRQ_TYPE_LEVEL_HIGH
+				 0 330 IRQ_TYPE_LEVEL_HIGH
+				 0 331 IRQ_TYPE_LEVEL_HIGH
+				 0 332 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
+	audma1: dma-controller@ec720000 {
+		compatible = "renesas,rcar-dmac";
+		reg = <0 0xec720000 0 0x10000>;
+		interrupts =	<0 347 IRQ_TYPE_LEVEL_HIGH
+				 0 333 IRQ_TYPE_LEVEL_HIGH
+				 0 334 IRQ_TYPE_LEVEL_HIGH
+				 0 335 IRQ_TYPE_LEVEL_HIGH
+				 0 336 IRQ_TYPE_LEVEL_HIGH
+				 0 337 IRQ_TYPE_LEVEL_HIGH
+				 0 338 IRQ_TYPE_LEVEL_HIGH
+				 0 339 IRQ_TYPE_LEVEL_HIGH
+				 0 340 IRQ_TYPE_LEVEL_HIGH
+				 0 341 IRQ_TYPE_LEVEL_HIGH
+				 0 342 IRQ_TYPE_LEVEL_HIGH
+				 0 343 IRQ_TYPE_LEVEL_HIGH
+				 0 344 IRQ_TYPE_LEVEL_HIGH
+				 0 345 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "error",
+				"ch0", "ch1", "ch2", "ch3",
+				"ch4", "ch5", "ch6", "ch7",
+				"ch8", "ch9", "ch10", "ch11",
+				"ch12";
+		clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>;
+		clock-names = "fck";
+		#dma-cells = <1>;
+		dma-channels = <13>;
+	};
+
+	audmapp: dma-controller@ec740000 {
+		compatible = "renesas,rcar-audmapp";
+		#dma-cells = <1>;
+
+		reg = <0 0xec740000 0 0x200>;
+	};
+
+	/* The memory map in the User's Manual maps the cores to bus numbers */
+	i2c0: i2c@e6508000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6508000 0 0x40>;
+		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6518000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6518000 0 0x40>;
+		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6530000 0 0x40>;
+		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6540000 0 0x40>;
+		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6520000 0 0x40>;
+		interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@e6528000 {
+		/* doesn't need pinmux */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,i2c-r8a7791";
+		reg = <0 0xe6528000 0 0x40>;
+		interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@e60b0000 {
+		/* doesn't need pinmux */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x425>;
+		interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2c7: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x425>;
+		interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	i2c8: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x425>;
+		interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	pfc: pfc@e6060000 {
+		compatible = "renesas,pfc-r8a7791";
+		reg = <0 0xe6060000 0 0x250>;
+		#gpio-range-cells = <3>;
+	};
+
+	mmcif0: mmc@ee200000 {
+		compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
+		dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+		dma-names = "tx", "rx";
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	sdhi0: sd@ee100000 {
+		compatible = "renesas,sdhi-r8a7791";
+		reg = <0 0xee100000 0 0x200>;
+		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
+		status = "disabled";
+	};
+
+	sdhi1: sd@ee140000 {
+		compatible = "renesas,sdhi-r8a7791";
+		reg = <0 0xee140000 0 0x100>;
+		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
+		status = "disabled";
+	};
+
+	sdhi2: sd@ee160000 {
+		compatible = "renesas,sdhi-r8a7791";
+		reg = <0 0xee160000 0 0x100>;
+		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
+		status = "disabled";
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c40000 0 64>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa3: serial@e6c70000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c70000 0 64>;
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa4: serial@e6c78000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c78000 0 64>;
+		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa5: serial@e6c80000 {
+		compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+		reg = <0 0xe6c80000 0 64>;
+		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif0: serial@e6e60000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial@e6e68000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif2: serial@e6e58000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6e58000 0 64>;
+		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif3: serial@e6ea8000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6ea8000 0 64>;
+		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif4: serial@e6ee0000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6ee0000 0 64>;
+		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif5: serial@e6ee8000 {
+		compatible = "renesas,scif-r8a7791", "renesas,scif";
+		reg = <0 0xe6ee8000 0 64>;
+		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif0: serial@e62c0000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif1: serial@e62c8000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif2: serial@e62d0000 {
+		compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+		reg = <0 0xe62d0000 0 96>;
+		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	ether: ethernet@ee700000 {
+		compatible = "renesas,ether-r8a7791";
+		reg = <0 0xee700000 0 0x400>;
+		interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
+		phy-mode = "rmii";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	sata0: sata@ee300000 {
+		compatible = "renesas,sata-r8a7791";
+		reg = <0 0xee300000 0 0x2000>;
+		interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
+		status = "disabled";
+	};
+
+	sata1: sata@ee500000 {
+		compatible = "renesas,sata-r8a7791";
+		reg = <0 0xee500000 0 0x2000>;
+		interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
+		status = "disabled";
+	};
+
+	hsusb: usb@e6590000 {
+		compatible = "renesas,usbhs-r8a7791";
+		reg = <0 0xe6590000 0 0x100>;
+		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
+		renesas,buswait = <4>;
+		phys = <&usb0 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usbphy: usb-phy@e6590100 {
+		compatible = "renesas,usb-phy-r8a7791";
+		reg = <0 0xe6590100 0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
+		clock-names = "usbhs";
+		status = "disabled";
+
+		usb0: usb-channel@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+		usb2: usb-channel@2 {
+			reg = <2>;
+			#phy-cells = <1>;
+		};
+	};
+
+	vin0: video@e6ef0000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+		reg = <0 0xe6ef0000 0 0x1000>;
+		interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin1: video@e6ef1000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+		reg = <0 0xe6ef1000 0 0x1000>;
+		interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vin2: video@e6ef2000 {
+		compatible = "renesas,vin-r8a7791";
+		clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+		reg = <0 0xe6ef2000 0 0x1000>;
+		interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	vsp1@fe928000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe928000 0 0x8000>;
+		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
+
+		renesas,has-lut;
+		renesas,has-sru;
+		renesas,#rpf = <5>;
+		renesas,#uds = <3>;
+		renesas,#wpf = <4>;
+	};
+
+	vsp1@fe930000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe930000 0 0x8000>;
+		interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
+
+		renesas,has-lif;
+		renesas,has-lut;
+		renesas,#rpf = <4>;
+		renesas,#uds = <1>;
+		renesas,#wpf = <4>;
+	};
+
+	vsp1@fe938000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe938000 0 0x8000>;
+		interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
+
+		renesas,has-lif;
+		renesas,has-lut;
+		renesas,#rpf = <4>;
+		renesas,#uds = <1>;
+		renesas,#wpf = <4>;
+	};
+
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7791";
+		reg = <0 0xfeb00000 0 0x40000>,
+		      <0 0xfeb90000 0 0x1c>;
+		reg-names = "du", "lvds.0";
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+			 <&mstp7_clks R8A7791_CLK_DU1>,
+			 <&mstp7_clks R8A7791_CLK_LVDS0>;
+		clock-names = "du.0", "du.1", "lvds.0";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_lvds0: endpoint {
+				};
+			};
+		};
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* External root clock */
+		extal_clk: extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overriden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "extal";
+		};
+
+		/*
+		 * The external audio clocks are configured as 0 Hz fixed frequency clocks by
+		 * default. Boards that provide audio clocks should override them.
+		 */
+		audio_clk_a: audio_clk_a {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_a";
+		};
+		audio_clk_b: audio_clk_b {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_b";
+		};
+		audio_clk_c: audio_clk_c {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "audio_clk_c";
+		};
+
+		/* External PCIe clock - can be overridden by the board */
+		pcie_bus_clk: pcie_bus_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <100000000>;
+			clock-output-names = "pcie_bus";
+			status = "disabled";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a7791-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "sdh", "sd0", "z";
+		};
+
+		/* Variable factor clocks */
+		sd1_clk: sd2_clk@e6150078 {
+			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150078 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd1";
+		};
+		sd2_clk: sd3_clk@e615026c {
+			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615026c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd2";
+		};
+		mmc0_clk: mmc0_clk@e6150240 {
+			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150240 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "mmc0";
+		};
+		ssp_clk: ssp_clk@e6150248 {
+			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150248 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "ssp";
+		};
+		ssprs_clk: ssprs_clk@e615024c {
+			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615024c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "ssprs";
+		};
+
+		/* Fixed factor clocks */
+		pll1_div2_clk: pll1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "pll1_div2";
+		};
+		zg_clk: zg_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+			clock-output-names = "zg";
+		};
+		zx_clk: zx_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+			clock-output-names = "zx";
+		};
+		zs_clk: zs_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+			clock-output-names = "zs";
+		};
+		hp_clk: hp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "hp";
+		};
+		i_clk: i_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "i";
+		};
+		b_clk: b_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "b";
+		};
+		p_clk: p_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+			clock-output-names = "p";
+		};
+		cl_clk: cl_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <48>;
+			clock-mult = <1>;
+			clock-output-names = "cl";
+		};
+		m2_clk: m2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "m2";
+		};
+		imp_clk: imp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clock-output-names = "imp";
+		};
+		rclk_clk: rclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(48 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "rclk";
+		};
+		oscclk_clk: oscclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(12 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "oscclk";
+		};
+		zb3_clk: zb3_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clock-output-names = "zb3";
+		};
+		zb3d2_clk: zb3d2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "zb3d2";
+		};
+		ddr_clk: ddr_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7791_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "ddr";
+		};
+		mp_clk: mp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <15>;
+			clock-mult = <1>;
+			clock-output-names = "mp";
+		};
+		cp_clk: cp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "cp";
+		};
+
+		/* Gate clocks */
+		mstp0_clks: mstp0_clks@e6150130 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
+			clocks = <&mp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7791_CLK_MSIOF0>;
+			clock-output-names = "msiof0";
+		};
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>, <&m2_clk>, <&zs_clk>, <&p_clk>,
+				 <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+				 <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>,
+				 <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU
+				R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG
+				R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0
+				R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0
+				R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0
+				R8A7791_CLK_VSP1_S
+			>;
+			clock-output-names =
+				"vcp0", "vpc0", "jpu", "ssp1", "tmu1", "3dg",
+				"2ddmac", "fdp1-1", "fdp1-0", "tmu3", "tmu2", "cmt0",
+				"tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy";
+		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+				 <&mp_clk>, <&mp_clk>, <&mp_clk>,
+				 <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0
+				R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1
+				R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2
+				R8A7791_CLK_SYS_DMAC1 R8A7791_CLK_SYS_DMAC0
+			>;
+			clock-output-names =
+				"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
+				"scifb1", "msiof1", "scifb2",
+				"sys-dmac1", "sys-dmac0";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
+				 <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
+				 <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
+				R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1
+				R8A7791_CLK_SSUSB R8A7791_CLK_CMT1
+				R8A7791_CLK_USBDMAC0 R8A7791_CLK_USBDMAC1
+			>;
+			clock-output-names =
+				"tpu0", "sdhi2", "sdhi1", "sdhi0",
+				"mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1",
+				"usbdmac0", "usbdmac1";
+		};
+		mstp5_clks: mstp5_clks@e6150144 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
+			clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1
+				R8A7791_CLK_THERMAL R8A7791_CLK_PWM
+			>;
+			clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
+		};
+		mstp7_clks: mstp7_clks@e615014c {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&mp_clk>,  <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
+				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				 <&zx_clk>, <&zx_clk>, <&zx_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5
+				R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0
+				R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1
+				R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0
+				R8A7791_CLK_LVDS0
+			>;
+			clock-output-names =
+				"ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0",
+				"scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0";
+		};
+		mstp8_clks: mstp8_clks@e6150990 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+			clocks = <&zg_clk>, <&hp_clk>, <&zg_clk>, <&zg_clk>,
+			         <&zg_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7791_CLK_IPMMU_SGX R8A7791_CLK_MLB
+				R8A7791_CLK_VIN2 R8A7791_CLK_VIN1 R8A7791_CLK_VIN0
+				R8A7791_CLK_ETHER R8A7791_CLK_SATA1 R8A7791_CLK_SATA0
+			>;
+			clock-output-names =
+				"ipmmu_sgx", "mlb", "vin2", "vin1", "vin0", "ether",
+				"sata1", "sata0";
+		};
+		mstp9_clks: mstp9_clks@e6150994 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+			clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+				 <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>,
+				 <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+				 <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4
+				R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0
+				R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5
+				R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2
+				R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
+			>;
+			clock-output-names =
+				"gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
+				"rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2",
+				"i2c1", "i2c0";
+		};
+		mstp10_clks: mstp10_clks@e6150998 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+			clocks = <&p_clk>,
+				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&p_clk>,
+				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
+				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>;
+
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7791_CLK_SSI_ALL
+				R8A7791_CLK_SSI9 R8A7791_CLK_SSI8 R8A7791_CLK_SSI7 R8A7791_CLK_SSI6 R8A7791_CLK_SSI5
+				R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0
+				R8A7791_CLK_SCU_ALL
+				R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0
+				R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5
+				R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0
+			>;
+			clock-output-names =
+				"ssi-all",
+				"ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
+				"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
+				"scu-all",
+				"scu-dvc1", "scu-dvc0",
+				"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
+				"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
+		};
+		mstp11_clks: mstp11_clks@e615099c {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5
+			>;
+			clock-output-names = "scifa3", "scifa4", "scifa5";
+		};
+	};
+
+	qspi: spi@e6b10000 {
+		compatible = "renesas,qspi-r8a7791", "renesas,qspi";
+		reg = <0 0xe6b10000 0 0x2c>;
+		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+		dma-names = "tx", "rx";
+		num-cs = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof0: spi@e6e20000 {
+		compatible = "renesas,msiof-r8a7791";
+		reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
+		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof1: spi@e6e10000 {
+		compatible = "renesas,msiof-r8a7791";
+		reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
+		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
+		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	msiof2: spi@e6e00000 {
+		compatible = "renesas,msiof-r8a7791";
+		reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
+		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
+		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
+		dma-names = "tx", "rx";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	xhci: usb@ee000000 {
+		compatible = "renesas,xhci-r8a7791";
+		reg = <0 0xee000000 0 0xc00>;
+		interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
+		phys = <&usb2 1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	pci0: pci@ee090000 {
+		compatible = "renesas,pci-r8a7791";
+		device_type = "pci";
+		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+		reg = <0 0xee090000 0 0xc00>,
+		      <0 0xee080000 0 0x1100>;
+		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		bus-range = <0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
+
+		usb@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
+	};
+
+	pci1: pci@ee0d0000 {
+		compatible = "renesas,pci-r8a7791";
+		device_type = "pci";
+		clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
+		reg = <0 0xee0d0000 0 0xc00>,
+		      <0 0xee0c0000 0 0x1100>;
+		interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		bus-range = <1 1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+		interrupt-map-mask = <0xff00 0 0 0x7>;
+		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
+				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
+
+		usb@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
+	};
+
+	pciec: pcie@fe000000 {
+		compatible = "renesas,pcie-r8a7791";
+		reg = <0 0xfe000000 0 0x80000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x00 0xff>;
+		device_type = "pci";
+		ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+			  0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+			  0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+			  0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+		/* Map all possible DDR as inbound ranges */
+		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
+			      0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+		interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 118 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
+		clock-names = "pcie", "pcie_bus";
+		status = "disabled";
+	};
+
+	rcar_sound: rcar_sound@ec500000 {
+		/*
+		 * #sound-dai-cells is required
+		 *
+		 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+		 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+		 */
+		compatible =  "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
+		reg =	<0 0xec500000 0 0x1000>, /* SCU */
+			<0 0xec5a0000 0 0x100>,  /* ADG */
+			<0 0xec540000 0 0x1000>, /* SSIU */
+			<0 0xec541000 0 0x1280>; /* SSI */
+		clocks = <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+			<&mstp10_clks R8A7791_CLK_SSI9>, <&mstp10_clks R8A7791_CLK_SSI8>,
+			<&mstp10_clks R8A7791_CLK_SSI7>, <&mstp10_clks R8A7791_CLK_SSI6>,
+			<&mstp10_clks R8A7791_CLK_SSI5>, <&mstp10_clks R8A7791_CLK_SSI4>,
+			<&mstp10_clks R8A7791_CLK_SSI3>, <&mstp10_clks R8A7791_CLK_SSI2>,
+			<&mstp10_clks R8A7791_CLK_SSI1>, <&mstp10_clks R8A7791_CLK_SSI0>,
+			<&mstp10_clks R8A7791_CLK_SCU_SRC9>, <&mstp10_clks R8A7791_CLK_SCU_SRC8>,
+			<&mstp10_clks R8A7791_CLK_SCU_SRC7>, <&mstp10_clks R8A7791_CLK_SCU_SRC6>,
+			<&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>,
+			<&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>,
+			<&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>,
+			<&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>,
+			<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
+		clock-names = "ssi-all",
+				"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+				"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+				"src.9", "src.8", "src.7", "src.6", "src.5",
+				"src.4", "src.3", "src.2", "src.1", "src.0",
+				"dvc.0", "dvc.1",
+				"clk_a", "clk_b", "clk_c", "clk_i";
+
+		status = "disabled";
+
+		rcar_sound,dvc {
+			dvc0: dvc@0 { };
+			dvc1: dvc@1 { };
+		};
+
+		rcar_sound,src {
+			src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; };
+			src1: src@1 { interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>; };
+			src2: src@2 { interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>; };
+			src3: src@3 { interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>; };
+			src4: src@4 { interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>; };
+			src5: src@5 { interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>; };
+			src6: src@6 { interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>; };
+			src7: src@7 { interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>; };
+			src8: src@8 { interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>; };
+			src9: src@9 { interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>; };
+		};
+
+		rcar_sound,ssi {
+			ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; };
+			ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; };
+		};
+	};
+};
diff --git a/src/arm/r8a7794-alt.dts b/src/arm/r8a7794-alt.dts
new file mode 100644
index 000000000000..0d848e605071
--- /dev/null
+++ b/src/arm/r8a7794-alt.dts
@@ -0,0 +1,48 @@
+/*
+ * Device Tree Source for the Alt board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+
+/ {
+	model = "Alt";
+	compatible = "renesas,alt", "renesas,r8a7794";
+
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		stdout-path = &scif2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&cmt0 {
+	status = "okay";
+};
+
+&scif2 {
+	status = "okay";
+};
diff --git a/src/arm/r8a7794.dtsi b/src/arm/r8a7794.dtsi
new file mode 100644
index 000000000000..8f78da5ef10b
--- /dev/null
+++ b/src/arm/r8a7794.dtsi
@@ -0,0 +1,588 @@
+/*
+ * Device Tree Source for the r8a7794 SoC
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014 Ulrich Hecht
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7794-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,r8a7794";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	gic: interrupt-controller@f1001000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0xf1001000 0 0x1000>,
+			<0 0xf1002000 0 0x1000>,
+			<0 0xf1004000 0 0x2000>,
+			<0 0xf1006000 0 0x2000>;
+		interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	cmt0: timer@ffca0000 {
+		compatible = "renesas,cmt-48-gen2";
+		reg = <0 0xffca0000 0 0x1004>;
+		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0x60>;
+
+		status = "disabled";
+	};
+
+	cmt1: timer@e6130000 {
+		compatible = "renesas,cmt-48-gen2";
+		reg = <0 0xe6130000 0 0x1004>;
+		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 123 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 124 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 125 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 126 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 127 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
+		clock-names = "fck";
+
+		renesas,channels-mask = <0xff>;
+
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	irqc0: interrupt-controller@e61c0000 {
+		compatible = "renesas,irqc-r8a7794", "renesas,irqc";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0 0xe61c0000 0 0x200>;
+		interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		reg = <0 0xe6c40000 0 64>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa3: serial@e6c70000 {
+		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		reg = <0 0xe6c70000 0 64>;
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa4: serial@e6c78000 {
+		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		reg = <0 0xe6c78000 0 64>;
+		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa5: serial@e6c80000 {
+		compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+		reg = <0 0xe6c80000 0 64>;
+		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif0: serial@e6e60000 {
+		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial@e6e68000 {
+		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif2: serial@e6e58000 {
+		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		reg = <0 0xe6e58000 0 64>;
+		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif3: serial@e6ea8000 {
+		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		reg = <0 0xe6ea8000 0 64>;
+		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif4: serial@e6ee0000 {
+		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		reg = <0 0xe6ee0000 0 64>;
+		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif5: serial@e6ee8000 {
+		compatible = "renesas,scif-r8a7794", "renesas,scif";
+		reg = <0 0xe6ee8000 0 64>;
+		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif0: serial@e62c0000 {
+		compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif1: serial@e62c8000 {
+		compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif2: serial@e62d0000 {
+		compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+		reg = <0 0xe62d0000 0 96>;
+		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* External root clock */
+		extal_clk: extal_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			/* This value must be overriden by the board. */
+			clock-frequency = <0>;
+			clock-output-names = "extal";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,r8a7794-cpg-clocks",
+				     "renesas,rcar-gen2-cpg-clocks";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll3",
+					     "lb", "qspi", "sdh", "sd0", "z";
+		};
+		/* Variable factor clocks */
+		sd1_clk: sd2_clk@e6150078 {
+			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150078 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd1";
+		};
+		sd2_clk: sd3_clk@e615007c {
+			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe615007c 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sd2";
+		};
+		mmc0_clk: mmc0_clk@e6150240 {
+			compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0 0xe6150240 0 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "mmc0";
+		};
+
+		/* Fixed factor clocks */
+		pll1_div2_clk: pll1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "pll1_div2";
+		};
+		zg_clk: zg_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+			clock-output-names = "zg";
+		};
+		zx_clk: zx_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <3>;
+			clock-mult = <1>;
+			clock-output-names = "zx";
+		};
+		zs_clk: zs_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <6>;
+			clock-mult = <1>;
+			clock-output-names = "zs";
+		};
+		hp_clk: hp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "hp";
+		};
+		i_clk: i_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "i";
+		};
+		b_clk: b_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <12>;
+			clock-mult = <1>;
+			clock-output-names = "b";
+		};
+		p_clk: p_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <24>;
+			clock-mult = <1>;
+			clock-output-names = "p";
+		};
+		cl_clk: cl_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <48>;
+			clock-mult = <1>;
+			clock-output-names = "cl";
+		};
+		m2_clk: m2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "m2";
+		};
+		imp_clk: imp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clock-output-names = "imp";
+		};
+		rclk_clk: rclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(48 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "rclk";
+		};
+		oscclk_clk: oscclk_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <(12 * 1024)>;
+			clock-mult = <1>;
+			clock-output-names = "oscclk";
+		};
+		zb3_clk: zb3_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clock-output-names = "zb3";
+		};
+		zb3d2_clk: zb3d2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "zb3d2";
+		};
+		ddr_clk: ddr_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+			clock-output-names = "ddr";
+		};
+		mp_clk: mp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-div = <15>;
+			clock-mult = <1>;
+			clock-output-names = "mp";
+		};
+		cp_clk: cp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <48>;
+			clock-mult = <1>;
+			clock-output-names = "cp";
+		};
+
+		acp_clk: acp_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&extal_clk>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "acp";
+		};
+
+		/* Gate clocks */
+		mstp0_clks: mstp0_clks@e6150130 {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
+			clocks = <&mp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7794_CLK_MSIOF0>;
+			clock-output-names = "msiof0";
+		};
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+			clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>,
+				 <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>,
+				 <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7794_CLK_VCP0 R8A7794_CLK_VPC0 R8A7794_CLK_TMU1
+				R8A7794_CLK_3DG R8A7794_CLK_2DDMAC R8A7794_CLK_FDP1_0
+				R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 R8A7794_CLK_CMT0
+				R8A7794_CLK_TMU0 R8A7794_CLK_VSP1_DU0 R8A7794_CLK_VSP1_S
+			>;
+			clock-output-names =
+				"vcp0", "vpc0", "tmu1", "3dg", "2ddmac", "fdp1-0",
+				"tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du0", "vsps";
+		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+				 <&mp_clk>, <&mp_clk>, <&mp_clk>,
+				 <&zs_clk>, <&zs_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0
+				R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1
+				R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2
+				R8A7794_CLK_SYS_DMAC1 R8A7794_CLK_SYS_DMAC0
+			>;
+			clock-output-names =
+				"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
+				"scifb1", "msiof1", "scifb2",
+				"sys-dmac1", "sys-dmac0";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+			clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
+			         <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+			        R8A7794_CLK_SDHI2 R8A7794_CLK_SDHI1 R8A7794_CLK_SDHI0
+				R8A7794_CLK_MMCIF0 R8A7794_CLK_CMT1
+				R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
+			>;
+			clock-output-names =
+			        "sdhi2", "sdhi1", "sdhi0",
+				"mmcif0", "cmt1", "usbdmac0", "usbdmac1";
+		};
+		mstp7_clks: mstp7_clks@e615014c {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>,
+				 <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
+				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7794_CLK_EHCI R8A7794_CLK_HSUSB
+				R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
+				R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
+				R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
+				R8A7794_CLK_SCIF0
+			>;
+			clock-output-names =
+				"ehci", "hsusb",
+				"hscif2", "scif5", "scif4", "hscif1", "hscif0",
+				"scif3", "scif2", "scif1", "scif0";
+		};
+		mstp8_clks: mstp8_clks@e6150990 {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+			clocks = <&zg_clk>, <&zg_clk>, <&p_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER
+			>;
+			clock-output-names =
+				"vin1", "vin0", "ether";
+		};
+		mstp9_clks: mstp9_clks@e6150994 {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
+			clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>,
+				<&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4
+				R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1
+				R8A7794_CLK_I2C0
+			>;
+			clock-output-names =
+				"qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0";
+		};
+		mstp11_clks: mstp11_clks@e615099c {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+			clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5
+			>;
+			clock-output-names = "scifa3", "scifa4", "scifa5";
+		};
+	};
+};
diff --git a/src/arm/r8a77xx-aa104xd12-panel.dtsi b/src/arm/r8a77xx-aa104xd12-panel.dtsi
new file mode 100644
index 000000000000..65cb50f0c29f
--- /dev/null
+++ b/src/arm/r8a77xx-aa104xd12-panel.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Common file for the AA104XD12 panel connected to Renesas R-Car boards
+ *
+ * Copyright (C) 2014 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+	panel {
+		compatible = "mitsubishi,aa104xd12", "panel-dpi";
+
+		width-mm = <210>;
+		height-mm = <158>;
+
+		panel-timing {
+			/* 1024x768 @65Hz */
+			clock-frequency = <65000000>;
+			hactive = <1024>;
+			vactive = <768>;
+			hsync-len = <136>;
+			hfront-porch = <20>;
+			hback-porch = <160>;
+			vfront-porch = <3>;
+			vback-porch = <29>;
+			vsync-len = <6>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_connector>;
+			};
+		};
+	};
+};
+
+&lvds_connector {
+	remote-endpoint = <&panel_in>;
+};
diff --git a/src/arm/rk3066a-bqcurie2.dts b/src/arm/rk3066a-bqcurie2.dts
new file mode 100644
index 000000000000..baf21ac6ce7f
--- /dev/null
+++ b/src/arm/rk3066a-bqcurie2.dts
@@ -0,0 +1,193 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "bq Curie 2";
+	compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
+
+	memory {
+		reg = <0x60000000 0x40000000>;
+	};
+
+	vcc_sd0: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		button@0 {
+			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
+			linux,code = <116>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			gpio-key,wakeup = <1>;
+			debounce-interval = <100>;
+		};
+		button@1 {
+			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
+			linux,code = <104>;
+			label = "GPIO Key Vol-";
+			linux,input-type = <1>;
+			gpio-key,wakeup = <0>;
+			debounce-interval = <100>;
+		};
+		/* VOL+ comes somehow thru the ADC */
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_arm>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vcc_rtc: regulator@0 {
+				regulator-name = "vcc_rtc";
+				regulator-always-on;
+			};
+
+			vcc_io: regulator@1 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+			};
+
+			vdd_arm: regulator@2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_ddr: regulator@3 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc18_cif: regulator@5 {
+				regulator-name = "vcc18_cif";
+				regulator-always-on;
+			};
+
+			vdd_11: regulator@6 {
+				regulator-name = "vdd_11";
+				regulator-always-on;
+			};
+
+			vcc_25: regulator@7 {
+				regulator-name = "vcc_25";
+				regulator-always-on;
+			};
+
+			vcc_18: regulator@8 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+			};
+
+			vcc25_hdmi: regulator@9 {
+				regulator-name = "vcc25_hdmi";
+				regulator-always-on;
+			};
+
+			vcca_33: regulator@10 {
+				regulator-name = "vcca_33";
+				regulator-always-on;
+			};
+
+			vcc_tp: regulator@11 {
+				regulator-name = "vcc_tp";
+				regulator-always-on;
+			};
+
+			vcc28_cif: regulator@12 {
+				regulator-name = "vcc28_cif";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* must be included after &tps gets defined */
+#include "tps65910.dtsi"
+
+&mmc0 { /* sdmmc */
+	num-slots = <1>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd0>;
+	bus-width = <4>;
+	disable-wp;
+};
+
+&mmc1 { /* wifi */
+	num-slots = <1>;
+	status = "okay";
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
+
+	bus-width = <4>;
+	disable-wp;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/src/arm/rk3066a-marsboard.dts b/src/arm/rk3066a-marsboard.dts
new file mode 100644
index 000000000000..0a7304beb417
--- /dev/null
+++ b/src/arm/rk3066a-marsboard.dts
@@ -0,0 +1,206 @@
+/*
+ * Copyright (c) 2014 Romain Perier <romain.perier@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "MarsBoard RK3066";
+	compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
+
+	memory {
+		reg = <0x60000000 0x40000000>;
+	};
+
+	vcc_sd0: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vsys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc1-supply = <&vsys>;
+		vcc2-supply = <&vsys>;
+		vcc3-supply = <&vsys>;
+		vcc4-supply = <&vsys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+		vcc7-supply = <&vsys>;
+		vccio-supply = <&vsys>;
+
+		regulators {
+			vcc_rtc: regulator@0 {
+				regulator-name = "vcc_rtc";
+				regulator-always-on;
+			};
+
+			vcc_io: regulator@1 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+			};
+
+			vdd_arm: regulator@2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_ddr: regulator@3 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc18_cif: regulator@5 {
+				regulator-name = "vcc18_cif";
+				regulator-always-on;
+			};
+
+			vdd_11: regulator@6 {
+				regulator-name = "vdd_11";
+				regulator-always-on;
+			};
+
+			vcc_25: regulator@7 {
+				regulator-name = "vcc_25";
+				regulator-always-on;
+			};
+
+			vcc_18: regulator@8 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+			};
+
+			vcc25_hdmi: regulator@9 {
+				regulator-name = "vcc25_hdmi";
+				regulator-always-on;
+			};
+
+			vcca_33: regulator@10 {
+				regulator-name = "vcca_33";
+				regulator-always-on;
+			};
+
+			vcc_rmii: regulator@11 {
+				regulator-name = "vcc_rmii";
+			};
+
+			vcc28_cif: regulator@12 {
+				regulator-name = "vcc28_cif";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* must be included after &tps gets defined */
+#include "tps65910.dtsi"
+
+&emac {
+	status = "okay";
+
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl {
+	lan8720a {
+		phy_int: phy-int {
+			rockchip,pins = <RK_GPIO1 26 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/src/arm/rk3066a-rayeager.dts b/src/arm/rk3066a-rayeager.dts
new file mode 100644
index 000000000000..3ac151102c2f
--- /dev/null
+++ b/src/arm/rk3066a-rayeager.dts
@@ -0,0 +1,468 @@
+/*
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "Rayeager PX2";
+	compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
+
+	memory {
+		reg = <0x60000000 0x40000000>;
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio6 1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			gpio-key,wakeup = <1>;
+			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <116>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+		};
+	};
+
+	vsys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */
+	vcc_stdby: 5v-stdby-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "5v_stdby";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_emmc: emmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "emmc_vccq";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		vin-supply = <&vsys>;
+	};
+
+	vcc_sata: sata-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sata_pwr>;
+		regulator-name = "usb_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_stdby>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_drv>;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_stdby>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_drv>;
+		regulator-name = "vcc_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_stdby>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_arm>;
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&emmc {
+	broken-cd;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
+	vmmc-supply = <&vcc_emmc>;
+	vqmmc-supply = <&vcc_emmc>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ak8963: ak8963@0d {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0d>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&comp_int>;
+	};
+
+	mma8452: mma8452@1d {
+		compatible = "fsl,mma8452";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsensor_int>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: tps@2d {
+		reg = <0x2d>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>, <&pwr_hold>;
+
+		vcc1-supply = <&vsys>;
+		vcc2-supply = <&vsys>;
+		vcc3-supply = <&vsys>;
+		vcc4-supply = <&vsys>;
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+		vcc7-supply = <&vsys>;
+		vccio-supply = <&vsys>;
+
+		regulators {
+			vcc_rtc: regulator@0 {
+				regulator-name = "vcc_rtc";
+				regulator-always-on;
+			};
+
+			vcc_io: regulator@1 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_arm: regulator@2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc_ddr: regulator@3 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc18: regulator@5 {
+				regulator-name = "vcc18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdd_11: regulator@6 {
+				regulator-name = "vdd_11";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_25: regulator@7 {
+				regulator-name = "vcc_25";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vccio_wl: regulator@8 {
+				regulator-name = "vccio_wl";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcc25_hdmi: regulator@9 {
+				regulator-name = "vcc25_hdmi";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			vcca_33: regulator@10 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc_rmii: regulator@11 {
+				regulator-name = "vcc_rmii";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc28_cif: regulator@12 {
+				regulator-name = "vcc28_cif";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+		};
+	};
+};
+
+#include "tps65910.dtsi"
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&mmc1 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
+	vmmc-supply = <&vccio_wl>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	ak8963 {
+		comp_int: comp-int {
+			rockchip,pins = <4 17 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	emac {
+		rmii_rst: rmii-rst {
+			rockchip,pins = <1 30 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <6 1 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <6 2 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	mma8452 {
+		gsensor_int: gsensor-int {
+			rockchip,pins = <4 16 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	mmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <3 7 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	usb_host {
+		host_drv: host-drv {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+
+		hub_rst: hub-rst {
+			rockchip,pins = <1 31 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+
+		sata_pwr: sata-pwr {
+			rockchip,pins = <4 22 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+
+		sata_reset: sata-reset {
+			rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb_otg {
+		otg_drv: otg-drv {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+	};
+
+	tps {
+		pmic_int: pmic-int {
+			rockchip,pins = <6 4 RK_FUNC_GPIO &pcfg_pull_default>;
+		};
+
+		pwr_hold: pwr-hold {
+			rockchip,pins = <6 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_25>;
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>;
+	status = "okay";
+};
+
+&usb_host {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hub_rst>, <&sata_reset>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/src/arm/rk3066a.dtsi b/src/arm/rk3066a.dtsi
new file mode 100644
index 000000000000..41ffd4951ef3
--- /dev/null
+++ b/src/arm/rk3066a.dtsi
@@ -0,0 +1,611 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3066a-cru.h>
+#include "rk3xxx.dtsi"
+
+/ {
+	compatible = "rockchip,rk3066a";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3066-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+			operating-points = <
+				/* kHz    uV */
+				1008000 1075000
+				 816000 1025000
+				 600000 1025000
+				 504000 1000000
+				 312000  975000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+	sram: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x10000>;
+
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x0 0x50>;
+		};
+	};
+
+	i2s0: i2s@10118000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x10118000 0x2000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		dmas = <&dmac1_s 4>, <&dmac1_s 5>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		status = "disabled";
+	};
+
+	i2s1: i2s@1011a000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x1011a000 0x2000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_bus>;
+		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
+		status = "disabled";
+	};
+
+	i2s2: i2s@1011c000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x1011c000 0x2000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2_bus>;
+		dmas = <&dmac1_s 9>, <&dmac1_s 10>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3066a-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	timer@2000e000 {
+		compatible = "snps,dw-apb-timer-osc";
+		reg = <0x2000e000 0x100>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
+		clock-names = "timer", "pclk";
+	};
+
+	timer@20038000 {
+		compatible = "snps,dw-apb-timer-osc";
+		reg = <0x20038000 0x100>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
+		clock-names = "timer", "pclk";
+	};
+
+	timer@2003a000 {
+		compatible = "snps,dw-apb-timer-osc";
+		reg = <0x2003a000 0x100>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
+		clock-names = "timer", "pclk";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3066a-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@20034000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20034000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@2003c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2003c000 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@2003e000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2003e000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio4@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio6@2000a000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2000a000 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_default: pcfg_pull_default {
+			bias-pull-pin-default;
+		};
+
+		pcfg_pull_none: pcfg_pull_none {
+			bias-disable;
+		};
+
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <RK_GPIO1 16 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */
+						<RK_GPIO1 17 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */
+						<RK_GPIO1 18 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */
+						<RK_GPIO1 19 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */
+						<RK_GPIO1 20 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */
+						<RK_GPIO1 21 RK_FUNC_2 &pcfg_pull_none>, /* crs_dvalid */
+						<RK_GPIO1 22 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */
+						<RK_GPIO1 23 RK_FUNC_2 &pcfg_pull_none>; /* rxd0 */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <RK_GPIO1 24 RK_FUNC_2 &pcfg_pull_none>, /* mac_md */
+						<RK_GPIO1 25 RK_FUNC_2 &pcfg_pull_none>; /* mac_mdclk */
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>;
+			};
+
+			emmc_rst: emmc-rst {
+				rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>;
+			};
+
+			/*
+			 * The data pins are shared between nandc and emmc and
+			 * not accessible through pinctrl. Also they should've
+			 * been already set correctly by firmware, as
+			 * flash/emmc is the boot-device.
+			 */
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>,
+						<RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_out: pwm0-out {
+				rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_out: pwm1-out {
+				rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_out: pwm2-out {
+				rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_out: pwm3-out {
+				rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>;
+			};
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		sd0 {
+			sd0_clk: sd0-clk {
+				rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sd0_cmd: sd0-cmd {
+				rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sd0_cd: sd0-cd {
+				rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sd0_wp: sd0-wp {
+				rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sd0_bus1: sd0-bus-width1 {
+				rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sd0_bus4: sd0-bus-width4 {
+				rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		sd1 {
+			sd1_clk: sd1-clk {
+				rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sd1_cmd: sd1-cmd {
+				rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sd1_cd: sd1-cd {
+				rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sd1_wp: sd1-wp {
+				rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sd1_bus1: sd1-bus-width1 {
+				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
+			};
+
+			sd1_bus4: sd1-bus-width4 {
+				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		i2s0 {
+			i2s0_bus: i2s0-bus {
+				rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		i2s1 {
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		i2s2 {
+			i2s2_bus: i2s2-bus {
+				rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_xfer>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_xfer>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_xfer>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_xfer>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_xfer>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_out>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_out>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_out>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_out>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_xfer>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_xfer>;
+};
+
+&wdt {
+	compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
+};
+
+&emac {
+	compatible = "rockchip,rk3066-emac";
+};
diff --git a/src/arm/rk3188-radxarock.dts b/src/arm/rk3188-radxarock.dts
new file mode 100644
index 000000000000..9a09579b8309
--- /dev/null
+++ b/src/arm/rk3188-radxarock.dts
@@ -0,0 +1,326 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3188.dtsi"
+
+/ {
+	model = "Radxa Rock";
+	compatible = "radxa,rock", "rockchip,rk3188";
+
+	memory {
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		button@0 {
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			gpio-key,wakeup = <1>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "rock:green:user1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue {
+			label = "rock:blue:user2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		sleep {
+			label = "rock:red:power";
+			gpios = <&gpio0 15 0>;
+			default-state = "off";
+		};
+	};
+
+	ir_recv: gpio-ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 10 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_recv_pin>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd0: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emac {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_arm>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&act8846_dvs0_ctl>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG2 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_arm: REG3 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG4 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG5 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_hdmi: REG6 {
+				regulator-name = "VDD_HDMI";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vcc18: REG7 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "VCCA_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_rmii: REG9 {
+				regulator-name = "VCC_RMII";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccio_wl: REG10 {
+				regulator-name = "VCCIO_WL";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC18_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc28: REG12 {
+				regulator-name = "VCC_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	num-slots = <1>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd0>;
+
+	bus-width = <4>;
+	disable-wp;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		act8846_dvs0_ctl: act8846-dvs0-ctl {
+			rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lan8720a  {
+		phy_int: phy-int {
+			rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir-receiver {
+		ir_recv_pin: ir-recv-pin {
+			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/src/arm/rk3188.dtsi b/src/arm/rk3188.dtsi
new file mode 100644
index 000000000000..1d4d79c6688d
--- /dev/null
+++ b/src/arm/rk3188.dtsi
@@ -0,0 +1,536 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3188-cru.h>
+#include "rk3xxx.dtsi"
+
+/ {
+	compatible = "rockchip,rk3188";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3066-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+			operating-points = <
+				/* kHz    uV */
+				1608000 1350000
+				1416000 1250000
+				1200000 1150000
+				1008000 1075000
+				 816000  975000
+				 600000  950000
+				 504000  925000
+				 312000  875000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x3>;
+		};
+	};
+
+	sram: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x10080000 0x8000>;
+
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x0 0x50>;
+		};
+	};
+
+	i2s0: i2s@1011a000 {
+		compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s";
+		reg = <0x1011a000 0x2000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		status = "disabled";
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3188-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmu>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@2000a000 {
+			compatible = "rockchip,rk3188-gpio-bank0";
+			reg = <0x2000a000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@2003c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2003c000 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@2003e000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2003e000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg_pull_up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg_pull_down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg_pull_none {
+			bias-disable;
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_rst: emmc-rst {
+				rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			/*
+			 * The data pins are shared between nandc and emmc and
+			 * not accessible through pinctrl. Also they should've
+			 * been already set correctly by firmware, as
+			 * flash/emmc is the boot-device.
+			 */
+		};
+
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */
+						<RK_GPIO3 17 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */
+						<RK_GPIO3 18 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */
+						<RK_GPIO3 19 RK_FUNC_2 &pcfg_pull_none>, /* rxd0 */
+						<RK_GPIO3 20 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */
+						<RK_GPIO3 21 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */
+						<RK_GPIO3 22 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */
+						<RK_GPIO3 23 RK_FUNC_2 &pcfg_pull_none>; /* crs_dvalid */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <RK_GPIO3 24 RK_FUNC_2 &pcfg_pull_none>,
+						<RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 25 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <RK_GPIO1 26 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 27 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <RK_GPIO1 28 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 29 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <RK_GPIO3 14 RK_FUNC_2 &pcfg_pull_none>,
+						<RK_GPIO3 15 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <RK_GPIO1 30 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 31 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_out: pwm0-out {
+				rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_out: pwm1-out {
+				rockchip,pins = <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_out: pwm2-out {
+				rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_out: pwm3-out {
+				rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <RK_GPIO1 15 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi1_cs1: spi1-cs1 {
+				rockchip,pins = <RK_GPIO1 14 RK_FUNC_2 &pcfg_pull_up>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
+						<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>,
+						<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>,
+						<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>,
+						<RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		sd0 {
+			sd0_clk: sd0-clk {
+				rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_cmd: sd0-cmd {
+				rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_cd: sd0-cd {
+				rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_wp: sd0-wp {
+				rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_pwr: sd0-pwr {
+				rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_bus1: sd0-bus-width1 {
+				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd0_bus4: sd0-bus-width4 {
+				rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		sd1 {
+			sd1_clk: sd1-clk {
+				rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd1_cmd: sd1-cmd {
+				rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd1_cd: sd1-cd {
+				rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd1_wp: sd1-wp {
+				rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd1_bus1: sd1-bus-width1 {
+				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sd1_bus4: sd1-bus-width4 {
+				rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s0 {
+			i2s0_bus: i2s0-bus {
+				rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+	};
+};
+
+&emac {
+	compatible = "rockchip,rk3188-emac";
+};
+
+&global_timer {
+	interrupts = <GIC_PPI 11 0xf04>;
+};
+
+&local_timer {
+	interrupts = <GIC_PPI 13 0xf04>;
+};
+
+&i2c0 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_xfer>;
+};
+
+&i2c1 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_xfer>;
+};
+
+&i2c2 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_xfer>;
+};
+
+&i2c3 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_xfer>;
+};
+
+&i2c4 {
+	compatible = "rockchip,rk3188-i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_xfer>;
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_out>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_out>;
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_out>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_out>;
+};
+
+&spi0 {
+	compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+};
+
+&spi1 {
+	compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_xfer>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_xfer>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_xfer>;
+};
+
+&wdt {
+	compatible = "rockchip,rk3188-wdt", "snps,dw-wdt";
+};
diff --git a/src/arm/rk3288-evb-act8846.dts b/src/arm/rk3288-evb-act8846.dts
new file mode 100644
index 000000000000..d7b8bbc0c25f
--- /dev/null
+++ b/src/arm/rk3288-evb-act8846.dts
@@ -0,0 +1,153 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+	};
+
+	hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcca_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/src/arm/rk3288-evb-rk808.dts b/src/arm/rk3288-evb-rk808.dts
new file mode 100644
index 000000000000..a1c294bf7fed
--- /dev/null
+++ b/src/arm/rk3288-evb-rk808.dts
@@ -0,0 +1,227 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+
+/ {
+	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc8-supply = <&vcc_18>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vccio_pmu>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_tp: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_tp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_codec: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_codec";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_wl: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&gmac {
+	phy-supply = <&vcc_phy>;
+	phy-mode = "rgmii";
+	clock_in_out = "input";
+	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 1000000>;
+	assigned-clocks = <&cru SCLK_MAC>;
+	assigned-clock-parents = <&ext_gmac>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	tx_delay = <0x30>;
+	rx_delay = <0x10>;
+	status = "ok";
+};
diff --git a/src/arm/rk3288-evb.dtsi b/src/arm/rk3288-evb.dtsi
new file mode 100644
index 000000000000..5e895a514a0b
--- /dev/null
+++ b/src/arm/rk3288-evb.dtsi
@@ -0,0 +1,263 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		reg = <0x0 0x80000000>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		button@0 {
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			gpio-key,wakeup = <1>;
+			debounce-interval = <100>;
+		};
+	};
+
+	/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_pwr>;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&emmc {
+	broken-cd;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;			/* wp not hooked up */
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on EVB board so bump up to 8ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	eth_phy {
+		eth_phy_pwr: eth-phy-pwr {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/src/arm/rk3288-firefly-beta.dts b/src/arm/rk3288-firefly-beta.dts
new file mode 100644
index 000000000000..75d77e38e0d6
--- /dev/null
+++ b/src/arm/rk3288-firefly-beta.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-firefly.dtsi"
+
+/ {
+	model = "Firefly-RK3288 Beta";
+	compatible = "firefly,firefly-rk3288-beta", "rockchip,rk3288";
+};
+
+&ir {
+	gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+};
+
+&pinctrl {
+	act8846 {
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
diff --git a/src/arm/rk3288-firefly.dts b/src/arm/rk3288-firefly.dts
new file mode 100644
index 000000000000..c07fe92dc69f
--- /dev/null
+++ b/src/arm/rk3288-firefly.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3288-firefly.dtsi"
+
+/ {
+	model = "Firefly-RK3288";
+	compatible = "firefly,firefly-rk3288", "rockchip,rk3288";
+};
+
+&ir {
+	gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+};
+
+&pinctrl {
+	act8846 {
+		pmic_vsel: pmic-vsel {
+			rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/src/arm/rk3288-firefly.dtsi b/src/arm/rk3288-firefly.dtsi
new file mode 100644
index 000000000000..e6f873abbe0d
--- /dev/null
+++ b/src/arm/rk3288-firefly.dtsi
@@ -0,0 +1,490 @@
+/*
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "rk3288.dtsi"
+
+/ {
+	memory {
+		reg = <0 0x80000000>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+	};
+
+	ir: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_int>;
+	};
+
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			gpio-key,wakeup = <1>;
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <116>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		work {
+			gpios = <&gpio8 1 GPIO_ACTIVE_LOW>;
+			label = "firefly:blue:user";
+			linux,default-trigger = "rc-feedback";
+			pinctrl-names = "default";
+			pinctrl-0 = <&work_led>;
+		};
+
+		power {
+			gpios = <&gpio8 2 GPIO_ACTIVE_LOW>;
+			label = "firefly:green:power";
+			linux,default-trigger = "default-on";
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_led>;
+		};
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_flash: flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_5v: usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_host_5v: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+
+	vcc_otg_5v: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc_otg_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_5v>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&emmc {
+	broken-cd;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc_flash>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	vdd_cpu: syr827@40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828@41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		interrupt-parent = <&gpio7>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+	};
+
+	act8846: act8846@5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
+		system-power-controller;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "vcc_io";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "vdd_log";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "vcc_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_18: REG7 {
+				regulator-name = "vcca_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "vcca_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcc_lan: REG9 {
+				regulator-name = "vcc_lan";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "vdd_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "vcc_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "vcc18_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_high: pcfg-output-high {
+		output-high;
+	};
+
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		pwr_hold: pwr-hold {
+			rockchip,pins = <0 1 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	gmac {
+		phy_int: phy-int {
+			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_pmeb: phy-pmeb {
+			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		phy_rst: phy-rst {
+			rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		power_led: power-led {
+			rockchip,pins = <8 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led: work-led {
+			rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb_host {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbhub_rst: usbhub-rst {
+			rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+
+	usb_otg {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdio0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
+	vmmc-supply = <&vcc_18>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usb_host1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbhub_rst>;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/src/arm/rk3288-thermal.dtsi b/src/arm/rk3288-thermal.dtsi
new file mode 100644
index 000000000000..2695200c0af7
--- /dev/null
+++ b/src/arm/rk3288-thermal.dtsi
@@ -0,0 +1,74 @@
+/*
+ * Device Tree Source for RK3288 SoC thermal
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+reserve_thermal: reserve_thermal {
+	polling-delay-passive = <1000>; /* milliseconds */
+	polling-delay = <5000>; /* milliseconds */
+
+	thermal-sensors = <&tsadc 0>;
+};
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <1000>; /* milliseconds */
+	polling-delay = <5000>; /* milliseconds */
+
+	thermal-sensors = <&tsadc 1>;
+
+	trips {
+		cpu_alert0: cpu_alert0 {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu_crit: cpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
+gpu_thermal: gpu_thermal {
+	polling-delay-passive = <1000>; /* milliseconds */
+	polling-delay = <5000>; /* milliseconds */
+
+	thermal-sensors = <&tsadc 2>;
+
+	trips {
+		gpu_alert0: gpu_alert0 {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "passive";
+		};
+		gpu_crit: gpu_crit {
+			temperature = <90000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&gpu_alert0>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
diff --git a/src/arm/rk3288.dtsi b/src/arm/rk3288.dtsi
new file mode 100644
index 000000000000..d771f687a13b
--- /dev/null
+++ b/src/arm/rk3288.dtsi
@@ -0,0 +1,1237 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3288-cru.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "rockchip,rk3288";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		mshc0 = &emmc;
+		mshc1 = &sdmmc;
+		mshc2 = &sdio0;
+		mshc3 = &sdio1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "rockchip,rk3066-smp";
+		rockchip,pmu = <&pmu>;
+
+		cpu0: cpu@500 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x500>;
+			resets = <&cru SRST_CORE0>;
+			operating-points = <
+				/* KHz    uV */
+				1608000 1350000
+				1512000 1300000
+				1416000 1200000
+				1200000 1100000
+				1008000 1050000
+				 816000 1000000
+				 696000  950000
+				 600000  900000
+				 408000  900000
+				 312000  900000
+				 216000  900000
+				 126000  900000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+		cpu@501 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x501>;
+			resets = <&cru SRST_CORE1>;
+		};
+		cpu@502 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x502>;
+			resets = <&cru SRST_CORE2>;
+		};
+		cpu@503 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a12";
+			reg = <0x503>;
+			resets = <&cru SRST_CORE3>;
+		};
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dmac_peri: dma-controller@ff250000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xff250000 0x4000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC2>;
+			clock-names = "apb_pclk";
+		};
+
+		dmac_bus_ns: dma-controller@ff600000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xff600000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dmac_bus_s: dma-controller@ffb20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xffb20000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC1>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	timer: timer@ff810000 {
+		compatible = "rockchip,rk3288-timer";
+		reg = <0xff810000 0x20>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&xin24m>, <&cru PCLK_TIMER>;
+		clock-names = "timer", "pclk";
+	};
+
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vopl_out>, <&vopb_out>;
+	};
+
+	sdmmc: dwmmc@ff0c0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xff0c0000 0x4000>;
+		status = "disabled";
+	};
+
+	sdio0: dwmmc@ff0d0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xff0d0000 0x4000>;
+		status = "disabled";
+	};
+
+	sdio1: dwmmc@ff0e0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xff0e0000 0x4000>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@ff0f0000 {
+		compatible = "rockchip,rk3288-dw-mshc";
+		clock-freq-min-max = <400000 150000000>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <0x100>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0xff0f0000 0x4000>;
+		status = "disabled";
+	};
+
+	saradc: saradc@ff100000 {
+		compatible = "rockchip,saradc";
+		reg = <0xff100000 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		status = "disabled";
+	};
+
+	spi0: spi@ff110000 {
+		compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac_peri 11>, <&dmac_peri 12>;
+		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+		reg = <0xff110000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi1: spi@ff120000 {
+		compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac_peri 13>, <&dmac_peri 14>;
+		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+		reg = <0xff120000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi2: spi@ff130000 {
+		compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+		clock-names = "spiclk", "apb_pclk";
+		dmas = <&dmac_peri 15>, <&dmac_peri 16>;
+		dma-names = "tx", "rx";
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+		reg = <0xff130000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@ff140000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff140000 0x1000>;
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@ff150000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff150000 0x1000>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c3_xfer>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@ff160000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff160000 0x1000>;
+		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c4_xfer>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@ff170000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff170000 0x1000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C5>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@ff180000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff180000 0x100>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer>;
+		status = "disabled";
+	};
+
+	uart1: serial@ff190000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff190000 0x100>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@ff690000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff690000 0x100>;
+		interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		status = "disabled";
+	};
+
+	uart3: serial@ff1b0000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff1b0000 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3_xfer>;
+		status = "disabled";
+	};
+
+	uart4: serial@ff1c0000 {
+		compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
+		reg = <0xff1c0000 0x100>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart4_xfer>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		#include "rk3288-thermal.dtsi"
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,rk3288-tsadc";
+		reg = <0xff280000 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "default";
+		pinctrl-0 = <&otp_out>;
+		#thermal-sensor-cells = <1>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
+	gmac: ethernet@ff290000 {
+		compatible = "rockchip,rk3288-gmac";
+		reg = <0xff290000 0x10000>;
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "macirq";
+		rockchip,grf = <&grf>;
+		clocks = <&cru SCLK_MAC>,
+			<&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+			<&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+			<&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+		clock-names = "stmmaceth",
+			"mac_clk_rx", "mac_clk_tx",
+			"clk_mac_ref", "clk_mac_refout",
+			"aclk_mac", "pclk_mac";
+	};
+
+	usb_host0_ehci: usb@ff500000 {
+		compatible = "generic-ehci";
+		reg = <0xff500000 0x100>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST0>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
+	/* NOTE: ohci@ff520000 doesn't actually work on hardware */
+
+	usb_host1: usb@ff540000 {
+		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0xff540000 0x40000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST1>;
+		clock-names = "otg";
+		status = "disabled";
+	};
+
+	usb_otg: usb@ff580000 {
+		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+				"snps,dwc2";
+		reg = <0xff580000 0x40000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		status = "disabled";
+	};
+
+	usb_hsic: usb@ff5c0000 {
+		compatible = "generic-ehci";
+		reg = <0xff5c0000 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_HSIC>;
+		clock-names = "usbhost";
+		status = "disabled";
+	};
+
+	i2c0: i2c@ff650000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff650000 0x1000>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_xfer>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@ff660000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0xff660000 0x1000>;
+		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_xfer>;
+		status = "disabled";
+	};
+
+	pwm0: pwm@ff680000 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0xff680000 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff680010 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0xff680010 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff680020 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0xff680020 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff680030 {
+		compatible = "rockchip,rk3288-pwm";
+		reg = <0xff680030 0x10>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	bus_intmem@ff700000 {
+		compatible = "mmio-sram";
+		reg = <0xff700000 0x18000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff700000 0x18000>;
+		smp-sram@0 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x00 0x10>;
+		};
+	};
+
+	sram@ff720000 {
+		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+		reg = <0xff720000 0x1000>;
+	};
+
+	pmu: power-management@ff730000 {
+		compatible = "rockchip,rk3288-pmu", "syscon";
+		reg = <0xff730000 0x100>;
+	};
+
+	sgrf: syscon@ff740000 {
+		compatible = "rockchip,rk3288-sgrf", "syscon";
+		reg = <0xff740000 0x1000>;
+	};
+
+	cru: clock-controller@ff760000 {
+		compatible = "rockchip,rk3288-cru";
+		reg = <0xff760000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+				  <&cru PLL_NPLL>, <&cru ACLK_CPU>,
+				  <&cru HCLK_CPU>, <&cru PCLK_CPU>,
+				  <&cru ACLK_PERI>, <&cru HCLK_PERI>,
+				  <&cru PCLK_PERI>;
+		assigned-clock-rates = <594000000>, <400000000>,
+				       <500000000>, <300000000>,
+				       <150000000>, <75000000>,
+				       <300000000>, <150000000>,
+				       <75000000>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3288-grf", "syscon";
+		reg = <0xff770000 0x1000>;
+	};
+
+	wdt: watchdog@ff800000 {
+		compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
+		reg = <0xff800000 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	i2s: i2s@ff890000 {
+		compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
+		reg = <0xff890000 0x10000>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		status = "disabled";
+	};
+
+	vopb: vop@ff930000 {
+		compatible = "rockchip,rk3288-vop";
+		reg = <0xff930000 0x19c>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopb_mmu>;
+		status = "disabled";
+
+		vopb_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopb_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vopb>;
+			};
+		};
+	};
+
+	vopb_mmu: iommu@ff930300 {
+		compatible = "rockchip,iommu";
+		reg = <0xff930300 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vopb_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	vopl: vop@ff940000 {
+		compatible = "rockchip,rk3288-vop";
+		reg = <0xff940000 0x19c>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vopl_mmu>;
+		status = "disabled";
+
+		vopl_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vopl_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vopl>;
+			};
+		};
+	};
+
+	vopl_mmu: iommu@ff940300 {
+		compatible = "rockchip,iommu";
+		reg = <0xff940300 0x100>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vopl_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
+	hdmi: hdmi@ff980000 {
+		compatible = "rockchip,rk3288-dw-hdmi";
+		reg = <0xff980000 0x20000>;
+		reg-io-width = <4>;
+		rockchip,grf = <&grf>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+		clock-names = "iahb", "isfr";
+		status = "disabled";
+
+		ports {
+			hdmi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				hdmi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_hdmi>;
+				};
+				hdmi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_hdmi>;
+				};
+			};
+		};
+	};
+
+	gic: interrupt-controller@ffc01000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0xffc01000 0x1000>,
+		      <0xffc02000 0x1000>,
+		      <0xffc04000 0x2000>,
+		      <0xffc06000 0x2000>;
+		interrupts = <GIC_PPI 9 0xf04>;
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3288-pinctrl";
+		rockchip,grf = <&grf>;
+		rockchip,pmu = <&pmu>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@ff750000 {
+			compatible = "rockchip,gpio-bank";
+			reg =	<0xff750000 0x100>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@ff780000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff780000 0x100>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@ff790000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff790000 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio3@ff7a0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7a0000 0x100>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO3>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio4@ff7b0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7b0000 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO4>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio5: gpio5@ff7c0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7c0000 0x100>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO5>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio6: gpio6@ff7d0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7d0000 0x100>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO6>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio7: gpio7@ff7e0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7e0000 0x100>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO7>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio8: gpio8@ff7f0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0xff7f0000 0x100>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO8>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		sleep {
+			global_pwroff: global-pwroff {
+				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			ddrio_pwroff: ddrio-pwroff {
+				rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			ddr0_retention: ddr0-retention {
+				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			ddr1_retention: ddr1-retention {
+				rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		i2c0 {
+			i2c0_xfer: i2c0-xfer {
+				rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
+						<0 16 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>,
+						<8 5 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c2 {
+			i2c2_xfer: i2c2-xfer {
+				rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>,
+						<6 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c3 {
+			i2c3_xfer: i2c3-xfer {
+				rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>,
+						<2 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c4 {
+			i2c4_xfer: i2c4-xfer {
+				rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>,
+						<7 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c5 {
+			i2c5_xfer: i2c5-xfer {
+				rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>,
+						<7 20 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		i2s0 {
+			i2s0_bus: i2s0-bus {
+				rockchip,pins = <6 0 RK_FUNC_1 &pcfg_pull_none>,
+						<6 1 RK_FUNC_1 &pcfg_pull_none>,
+						<6 2 RK_FUNC_1 &pcfg_pull_none>,
+						<6 3 RK_FUNC_1 &pcfg_pull_none>,
+						<6 4 RK_FUNC_1 &pcfg_pull_none>,
+						<6 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdmmc_cd: sdmcc-cd {
+				rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus1: sdmmc-bus1 {
+				rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>,
+						<6 17 RK_FUNC_1 &pcfg_pull_up>,
+						<6 18 RK_FUNC_1 &pcfg_pull_up>,
+						<6 19 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		sdio0 {
+			sdio0_bus1: sdio0-bus1 {
+				rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_bus4: sdio0-bus4 {
+				rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>,
+						<4 21 RK_FUNC_1 &pcfg_pull_up>,
+						<4 22 RK_FUNC_1 &pcfg_pull_up>,
+						<4 23 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_cmd: sdio0-cmd {
+				rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_clk: sdio0-clk {
+				rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			sdio0_cd: sdio0-cd {
+				rockchip,pins = <4 26 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_wp: sdio0-wp {
+				rockchip,pins = <4 27 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_pwr: sdio0-pwr {
+				rockchip,pins = <4 28 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_bkpwr: sdio0-bkpwr {
+				rockchip,pins = <4 29 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			sdio0_int: sdio0-int {
+				rockchip,pins = <4 30 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		sdio1 {
+			sdio1_bus1: sdio1-bus1 {
+				rockchip,pins = <3 24 4 &pcfg_pull_up>;
+			};
+
+			sdio1_bus4: sdio1-bus4 {
+				rockchip,pins = <3 24 4 &pcfg_pull_up>,
+						<3 25 4 &pcfg_pull_up>,
+						<3 26 4 &pcfg_pull_up>,
+						<3 27 4 &pcfg_pull_up>;
+			};
+
+			sdio1_cd: sdio1-cd {
+				rockchip,pins = <3 28 4 &pcfg_pull_up>;
+			};
+
+			sdio1_wp: sdio1-wp {
+				rockchip,pins = <3 29 4 &pcfg_pull_up>;
+			};
+
+			sdio1_bkpwr: sdio1-bkpwr {
+				rockchip,pins = <3 30 4 &pcfg_pull_up>;
+			};
+
+			sdio1_int: sdio1-int {
+				rockchip,pins = <3 31 4 &pcfg_pull_up>;
+			};
+
+			sdio1_cmd: sdio1-cmd {
+				rockchip,pins = <4 6 4 &pcfg_pull_up>;
+			};
+
+			sdio1_clk: sdio1-clk {
+				rockchip,pins = <4 7 4 &pcfg_pull_none>;
+			};
+
+			sdio1_pwr: sdio1-pwr {
+				rockchip,pins = <4 9 4 &pcfg_pull_up>;
+			};
+		};
+
+		emmc {
+			emmc_clk: emmc-clk {
+				rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			emmc_cmd: emmc-cmd {
+				rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_pwr: emmc-pwr {
+				rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_bus1: emmc-bus1 {
+				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_bus4: emmc-bus4 {
+				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
+						<3 1 RK_FUNC_2 &pcfg_pull_up>,
+						<3 2 RK_FUNC_2 &pcfg_pull_up>,
+						<3 3 RK_FUNC_2 &pcfg_pull_up>;
+			};
+
+			emmc_bus8: emmc-bus8 {
+				rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>,
+						<3 1 RK_FUNC_2 &pcfg_pull_up>,
+						<3 2 RK_FUNC_2 &pcfg_pull_up>,
+						<3 3 RK_FUNC_2 &pcfg_pull_up>,
+						<3 4 RK_FUNC_2 &pcfg_pull_up>,
+						<3 5 RK_FUNC_2 &pcfg_pull_up>,
+						<3 6 RK_FUNC_2 &pcfg_pull_up>,
+						<3 7 RK_FUNC_2 &pcfg_pull_up>;
+			};
+		};
+
+		spi0 {
+			spi0_clk: spi0-clk {
+				rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi0_cs0: spi0-cs0 {
+				rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi0_tx: spi0-tx {
+				rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi0_rx: spi0-rx {
+				rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi0_cs1: spi0-cs1 {
+				rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+		spi1 {
+			spi1_clk: spi1-clk {
+				rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi1_cs0: spi1-cs0 {
+				rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi1_rx: spi1-rx {
+				rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>;
+			};
+			spi1_tx: spi1-tx {
+				rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>;
+			};
+		};
+
+		spi2 {
+			spi2_cs1: spi2-cs1 {
+				rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi2_clk: spi2-clk {
+				rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi2_cs0: spi2-cs0 {
+				rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi2_rx: spi2-rx {
+				rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>;
+			};
+			spi2_tx: spi2-tx {
+				rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>,
+						<4 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>,
+						<5 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_cts: uart1-cts {
+				rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart1_rts: uart1-rts {
+				rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>,
+						<7 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+
+		uart3 {
+			uart3_xfer: uart3-xfer {
+				rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>,
+						<7 8 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart3_cts: uart3-cts {
+				rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart3_rts: uart3-rts {
+				rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart4 {
+			uart4_xfer: uart4-xfer {
+				rockchip,pins = <5 12 3 &pcfg_pull_up>,
+						<5 13 3 &pcfg_pull_none>;
+			};
+
+			uart4_cts: uart4-cts {
+				rockchip,pins = <5 14 3 &pcfg_pull_none>;
+			};
+
+			uart4_rts: uart4-rts {
+				rockchip,pins = <5 15 3 &pcfg_pull_none>;
+			};
+		};
+
+		tsadc {
+			otp_out: otp-out {
+				rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <7 22 3 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <7 23 3 &pcfg_pull_none>;
+			};
+		};
+
+		gmac {
+			rgmii_pins: rgmii-pins {
+				rockchip,pins = <3 30 3 &pcfg_pull_none>,
+						<3 31 3 &pcfg_pull_none>,
+						<3 26 3 &pcfg_pull_none>,
+						<3 27 3 &pcfg_pull_none>,
+						<3 28 3 &pcfg_pull_none_12ma>,
+						<3 29 3 &pcfg_pull_none_12ma>,
+						<3 24 3 &pcfg_pull_none_12ma>,
+						<3 25 3 &pcfg_pull_none_12ma>,
+						<4 0 3 &pcfg_pull_none>,
+						<4 5 3 &pcfg_pull_none>,
+						<4 6 3 &pcfg_pull_none>,
+						<4 9 3 &pcfg_pull_none_12ma>,
+						<4 4 3 &pcfg_pull_none_12ma>,
+						<4 1 3 &pcfg_pull_none>,
+						<4 3 3 &pcfg_pull_none>;
+			};
+
+			rmii_pins: rmii-pins {
+				rockchip,pins = <3 30 3 &pcfg_pull_none>,
+						<3 31 3 &pcfg_pull_none>,
+						<3 28 3 &pcfg_pull_none>,
+						<3 29 3 &pcfg_pull_none>,
+						<4 0 3 &pcfg_pull_none>,
+						<4 5 3 &pcfg_pull_none>,
+						<4 4 3 &pcfg_pull_none>,
+						<4 1 3 &pcfg_pull_none>,
+						<4 2 3 &pcfg_pull_none>,
+						<4 3 3 &pcfg_pull_none>;
+			};
+		};
+	};
+};
diff --git a/src/arm/rk3xxx.dtsi b/src/arm/rk3xxx.dtsi
new file mode 100644
index 000000000000..c54a9715dcfa
--- /dev/null
+++ b/src/arm/rk3xxx.dtsi
@@ -0,0 +1,388 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		mshc0 = &emmc;
+		mshc1 = &mmc0;
+		mshc2 = &mmc1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dmac1_s: dma-controller@20018000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20018000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMA1>;
+			clock-names = "apb_pclk";
+		};
+
+		dmac1_ns: dma-controller@2001c000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x2001c000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMA1>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+		};
+
+		dmac2: dma-controller@20078000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20078000 0x4000>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMA2>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+		clock-output-names = "xin24m";
+	};
+
+	L2: l2-cache-controller@10138000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x10138000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	scu@1013c000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1013c000 0x100>;
+	};
+
+	global_timer: global-timer@1013c200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x1013c200 0x20>;
+		interrupts = <GIC_PPI 11 0x304>;
+		clocks = <&cru CORE_PERI>;
+	};
+
+	local_timer: local-timer@1013c600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1013c600 0x20>;
+		interrupts = <GIC_PPI 13 0x304>;
+		clocks = <&cru CORE_PERI>;
+	};
+
+	gic: interrupt-controller@1013d000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x1013d000 0x1000>,
+		      <0x1013c100 0x0100>;
+	};
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		status = "disabled";
+	};
+
+	uart1: serial@10126000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10126000 0x400>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		status = "disabled";
+	};
+
+	usb_otg: usb@10180000 {
+		compatible = "rockchip,rk3066-usb", "snps,dwc2";
+		reg = <0x10180000 0x40000>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG0>;
+		clock-names = "otg";
+		status = "disabled";
+	};
+
+	usb_host: usb@101c0000 {
+		compatible = "snps,dwc2";
+		reg = <0x101c0000 0x40000>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG1>;
+		clock-names = "otg";
+		status = "disabled";
+	};
+
+	emac: ethernet@10204000 {
+		compatible = "snps,arc-emac";
+		reg = <0x10204000 0x3c>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref";
+		max-speed = <100>;
+		phy-mode = "rmii";
+
+		status = "disabled";
+	};
+
+	mmc0: dwmmc@10214000 {
+		compatible = "rockchip,rk2928-dw-mshc";
+		reg = <0x10214000 0x1000>;
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <256>;
+		status = "disabled";
+	};
+
+	mmc1: dwmmc@10218000 {
+		compatible = "rockchip,rk2928-dw-mshc";
+		reg = <0x10218000 0x1000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <256>;
+		status = "disabled";
+	};
+
+	emmc: dwmmc@1021c000 {
+		compatible = "rockchip,rk2928-dw-mshc";
+		reg = <0x1021c000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
+		clock-names = "biu", "ciu";
+		fifo-depth = <256>;
+		status = "disabled";
+	};
+
+	pmu: pmu@20004000 {
+		compatible = "rockchip,rk3066-pmu", "syscon";
+		reg = <0x20004000 0x100>;
+	};
+
+	grf: grf@20008000 {
+		compatible = "syscon";
+		reg = <0x20008000 0x200>;
+	};
+
+	i2c0: i2c@2002d000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2002d000 0x1000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C0>;
+
+		status = "disabled";
+	};
+
+	i2c1: i2c@2002f000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2002f000 0x1000>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C1>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	pwm0: pwm@20030000 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20030000 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM01>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@20030010 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20030010 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM01>;
+		status = "disabled";
+	};
+
+	wdt: watchdog@2004c000 {
+		compatible = "snps,dw-wdt";
+		reg = <0x2004c000 0x100>;
+		clocks = <&cru PCLK_WDT>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@20050020 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM23>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@20050030 {
+		compatible = "rockchip,rk2928-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <2>;
+		clocks = <&cru PCLK_PWM23>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@20056000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C2>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	i2c3: i2c@2005a000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2005a000 0x1000>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C3>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	i2c4: i2c@2005e000 {
+		compatible = "rockchip,rk3066-i2c";
+		reg = <0x2005e000 0x1000>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rockchip,grf = <&grf>;
+
+		clocks = <&cru PCLK_I2C4>;
+		clock-names = "i2c";
+
+		status = "disabled";
+	};
+
+	uart2: serial@20064000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x20064000 0x400>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		status = "disabled";
+	};
+
+	uart3: serial@20068000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x20068000 0x400>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clock-names = "baudclk", "apb_pclk";
+		clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+		status = "disabled";
+	};
+
+	saradc: saradc@2006c000 {
+		compatible = "rockchip,saradc";
+		reg = <0x2006c000 0x100>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		#io-channel-cells = <1>;
+		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+		clock-names = "saradc", "apb_pclk";
+		status = "disabled";
+	};
+
+	spi0: spi@20070000 {
+		compatible = "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x20070000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&dmac2 10>, <&dmac2 11>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+
+	spi1: spi@20074000 {
+		compatible = "rockchip,rk3066-spi";
+		clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+		clock-names = "spiclk", "apb_pclk";
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x20074000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <&dmac2 12>, <&dmac2 13>;
+		dma-names = "tx", "rx";
+		status = "disabled";
+	};
+};
diff --git a/src/arm/s3c2416-pinctrl.dtsi b/src/arm/s3c2416-pinctrl.dtsi
new file mode 100644
index 000000000000..527e3193817f
--- /dev/null
+++ b/src/arm/s3c2416-pinctrl.dtsi
@@ -0,0 +1,173 @@
+/*
+ * Samsung S3C2416 pinctrl settings
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pinctrl_0 {
+	/*
+	 * Pin banks
+	 */
+
+	gpa: gpa {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpc: gpc {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpd: gpd {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpe: gpe {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpf: gpf {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg: gpg {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph: gph {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpj: gpj {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk: gpk {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpl: gpl {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpm: gpm {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/*
+	 * Pin groups
+	 */
+
+	uart0_data: uart0-data {
+		samsung,pins = "gph-0", "gph-1";
+		samsung,pin-function = <2>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gph-8", "gph-9";
+		samsung,pin-function = <2>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gph-2", "gph-3";
+		samsung,pin-function = <2>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gph-10", "gph-11";
+		samsung,pin-function = <2>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gph-4", "gph-5";
+		samsung,pin-function = <2>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gph-6", "gph-7";
+		samsung,pin-function = <2>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gph-6", "gph-7";
+		samsung,pin-function = <2>;
+	};
+
+	extuart_clk: extuart-clk {
+		samsung,pins = "gph-12";
+		samsung,pin-function = <2>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpe-14", "gpe-15";
+		samsung,pin-function = <2>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
+		samsung,pin-function = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpe-5";
+		samsung,pin-function = <2>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpe-6";
+		samsung,pin-function = <2>;
+	};
+
+	sd0_bus1: sd0-bus1 {
+		samsung,pins = "gpe-7";
+		samsung,pin-function = <2>;
+	};
+
+	sd0_bus4: sd0-bus4 {
+		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
+		samsung,pin-function = <2>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpl-8";
+		samsung,pin-function = <2>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpl-9";
+		samsung,pin-function = <2>;
+	};
+
+	sd1_bus1: sd1-bus1 {
+		samsung,pins = "gpl-0";
+		samsung,pin-function = <2>;
+	};
+
+	sd1_bus4: sd1-bus4 {
+		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
+		samsung,pin-function = <2>;
+	};
+};
diff --git a/src/arm/s3c2416-smdk2416.dts b/src/arm/s3c2416-smdk2416.dts
new file mode 100644
index 000000000000..ea92fd69529a
--- /dev/null
+++ b/src/arm/s3c2416-smdk2416.dts
@@ -0,0 +1,85 @@
+/*
+ * SAMSUNG SMDK2416 board device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "s3c2416.dtsi"
+
+/ {
+	model = "SMDK2416";
+	compatible = "samsung,s3c2416";
+
+	memory {
+		reg =  <0x30000000 0x4000000>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		xti: xti {
+			compatible = "fixed-clock";
+			clock-frequency = <12000000>;
+			clock-output-names = "xti";
+			#clock-cells = <0>;
+		};
+	};
+
+	serial@50000000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+	};
+
+	serial@50004000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+	};
+
+	serial@50008000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_data>;
+	};
+
+	serial@5000C000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart3_data>;
+	};
+
+	watchdog@53000000 {
+		status = "okay";
+	};
+
+	rtc@57000000 {
+		status = "okay";
+	};
+
+	sdhci@4AC00000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
+				<&sd0_bus1>, <&sd0_bus4>;
+		bus-width = <4>;
+		cd-gpios = <&gpf 1 0>;
+		cd-inverted;
+		status = "okay";
+	};
+
+	sdhci@4A800000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
+				<&sd1_bus1>, <&sd1_bus4>;
+		bus-width = <4>;
+		broken-cd;
+		status = "okay";
+	};
+};
diff --git a/src/arm/s3c2416.dtsi b/src/arm/s3c2416.dtsi
new file mode 100644
index 000000000000..30b8f7e47454
--- /dev/null
+++ b/src/arm/s3c2416.dtsi
@@ -0,0 +1,125 @@
+/*
+ * Samsung's S3C2416 SoC device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/s3c2443.h>
+#include "s3c24xx.dtsi"
+#include "s3c2416-pinctrl.dtsi"
+
+/ {
+	model = "Samsung S3C2416 SoC";
+	compatible = "samsung,s3c2416";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	interrupt-controller@4a000000 {
+		compatible = "samsung,s3c2416-irq";
+	};
+
+	clocks: clock-controller@0x4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
+	pinctrl@56000000 {
+		compatible = "samsung,s3c2416-pinctrl";
+	};
+
+	timer@51000000 {
+		clocks = <&clocks PCLK_PWM>;
+		clock-names = "timers";
+	};
+
+	serial@50000000 {
+		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
+	};
+
+	serial@50004000 {
+		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+				<&clocks SCLK_UART>;
+	};
+
+	serial@50008000 {
+		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+				<&clocks SCLK_UART>;
+	};
+
+	uart3: serial@5000C000 {
+		compatible = "samsung,s3c2440-uart";
+		reg = <0x5000C000 0x4000>;
+		interrupts = <1 18 24 4>, <1 18 25 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+				<&clocks SCLK_UART>;
+		status = "disabled";
+	};
+
+	sdhci@4AC00000 {
+		compatible = "samsung,s3c6410-sdhci";
+		reg = <0x4AC00000 0x100>;
+		interrupts = <0 0 21 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+				<&clocks MUX_HSMMC0>;
+		status = "disabled";
+	};
+
+	sdhci@4A800000 {
+		compatible = "samsung,s3c6410-sdhci";
+		reg = <0x4A800000 0x100>;
+		interrupts = <0 0 20 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+				<&clocks MUX_HSMMC1>;
+		status = "disabled";
+	};
+
+	watchdog@53000000 {
+		interrupts = <1 9 27 3>;
+		clocks = <&clocks PCLK_WDT>;
+		clock-names = "watchdog";
+	};
+
+	rtc@57000000 {
+		compatible = "samsung,s3c2416-rtc";
+		clocks = <&clocks PCLK_RTC>;
+		clock-names = "rtc";
+	};
+
+	i2c@54000000 {
+		compatible = "samsung,s3c2440-i2c";
+		clocks = <&clocks PCLK_I2C0>;
+		clock-names = "i2c";
+	};
+};
diff --git a/src/arm/s3c24xx.dtsi b/src/arm/s3c24xx.dtsi
new file mode 100644
index 000000000000..5ed43b857cc4
--- /dev/null
+++ b/src/arm/s3c24xx.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Samsung's S3C24XX family device tree source
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "samsung,s3c24xx";
+	interrupt-parent = <&intc>;
+
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	intc:interrupt-controller@4a000000 {
+		compatible = "samsung,s3c2410-irq";
+		reg = <0x4a000000 0x100>;
+		interrupt-controller;
+		#interrupt-cells = <4>;
+	};
+
+	pinctrl_0: pinctrl@56000000 {
+		reg = <0x56000000 0x1000>;
+
+		wakeup-interrupt-controller {
+			compatible = "samsung,s3c2410-wakeup-eint";
+			interrupts = <0 0 0 3>,
+				     <0 0 1 3>,
+				     <0 0 2 3>,
+				     <0 0 3 3>,
+				     <0 0 4 4>,
+				     <0 0 5 4>;
+		};
+	};
+
+	timer@51000000 {
+		compatible = "samsung,s3c2410-pwm";
+		reg = <0x51000000 0x1000>;
+		interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
+		#pwm-cells = <4>;
+	};
+
+	uart0: serial@50000000 {
+		compatible = "samsung,s3c2410-uart";
+		reg = <0x50000000 0x4000>;
+		interrupts = <1 28 0 4>, <1 28 1 4>;
+		status = "disabled";
+	};
+
+	uart1: serial@50004000 {
+		compatible = "samsung,s3c2410-uart";
+		reg = <0x50004000 0x4000>;
+		interrupts = <1 23 3 4>, <1 23 4 4>;
+		status = "disabled";
+	};
+
+	uart2: serial@50008000 {
+		compatible = "samsung,s3c2410-uart";
+		reg = <0x50008000 0x4000>;
+		interrupts = <1 15 6 4>, <1 15 7 4>;
+		status = "disabled";
+	};
+
+	watchdog@53000000 {
+		compatible = "samsung,s3c2410-wdt";
+		reg = <0x53000000 0x100>;
+		interrupts = <0 0 9 3>;
+		status = "disabled";
+	};
+
+	rtc@57000000 {
+		compatible = "samsung,s3c2410-rtc";
+		reg = <0x57000000 0x100>;
+		interrupts = <0 0 30 3>, <0 0 8 3>;
+		status = "disabled";
+	};
+
+	i2c@54000000 {
+		compatible = "samsung,s3c2410-i2c";
+		reg = <0x54000000 0x100>;
+		interrupts = <0 0 27 3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
diff --git a/src/arm/s3c6400.dtsi b/src/arm/s3c6400.dtsi
new file mode 100644
index 000000000000..a7d1c8ec150d
--- /dev/null
+++ b/src/arm/s3c6400.dtsi
@@ -0,0 +1,41 @@
+/*
+ * Samsung's S3C6400 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6400 SoC device nodes are listed in this file. S3C6400
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6400 SoC. As device tree coverage for S3C6400 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "s3c64xx.dtsi"
+
+/ {
+	compatible = "samsung,s3c6400";
+};
+
+&vic0 {
+	valid-mask = <0xfffffe1f>;
+	valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+	valid-mask = <0xffffffff>;
+	valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+	clocks: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6400-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+};
diff --git a/src/arm/s3c6410-mini6410.dts b/src/arm/s3c6410-mini6410.dts
new file mode 100644
index 000000000000..a25debb50401
--- /dev/null
+++ b/src/arm/s3c6410-mini6410.dts
@@ -0,0 +1,224 @@
+/*
+ * Samsung's S3C6410 based Mini6410 board device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for FriendlyARM Mini6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+	model = "FriendlyARM Mini6410 board based on S3C6410";
+	compatible = "friendlyarm,mini6410", "samsung,s3c6410";
+
+	memory {
+		reg = <0x50000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fin_pll: oscillator@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			clock-frequency = <12000000>;
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		xusbxti: oscillator@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			clock-output-names = "xusbxti";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	srom-cs1@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x18000000 0x8000000>;
+		ranges;
+
+		ethernet@18000000 {
+			compatible = "davicom,dm9000";
+			reg = <0x18000000 0x2 0x18000004 0x2>;
+			interrupt-parent = <&gpn>;
+			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+			davicom,no-eeprom;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+		autorepeat;
+
+		button-k1 {
+			label = "K1";
+			gpios = <&gpn 0 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+			debounce-interval = <20>;
+		};
+
+		button-k2 {
+			label = "K2";
+			gpios = <&gpn 1 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+			debounce-interval = <20>;
+		};
+
+		button-k3 {
+			label = "K3";
+			gpios = <&gpn 2 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+			debounce-interval = <20>;
+		};
+
+		button-k4 {
+			label = "K4";
+			gpios = <&gpn 3 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+			debounce-interval = <20>;
+		};
+
+		button-k5 {
+			label = "K5";
+			gpios = <&gpn 4 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+			debounce-interval = <20>;
+		};
+
+		button-k6 {
+			label = "K6";
+			gpios = <&gpn 5 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+			debounce-interval = <20>;
+		};
+
+		button-k7 {
+			label = "K7";
+			gpios = <&gpl 11 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+			debounce-interval = <20>;
+		};
+
+		button-k8 {
+			label = "K8";
+			gpios = <&gpl 12 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_leds>;
+
+		led-1 {
+			label = "LED1";
+			gpios = <&gpk 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "LED2";
+			gpios = <&gpk 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-3 {
+			label = "LED3";
+			gpios = <&gpk 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			label = "LED4";
+			gpios = <&gpk 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	buzzer {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 0 1000000 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_out>;
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+	status = "okay";
+};
+
+&pinctrl0 {
+	gpio_leds: gpio-leds {
+		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	gpio_keys: gpio-keys {
+		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
+				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
diff --git a/src/arm/s3c6410-smdk6410.dts b/src/arm/s3c6410-smdk6410.dts
new file mode 100644
index 000000000000..ecf35ec466f7
--- /dev/null
+++ b/src/arm/s3c6410-smdk6410.dts
@@ -0,0 +1,103 @@
+/*
+ * Samsung S3C6410 based SMDK6410 board device tree source.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Device tree source file for SAMSUNG SMDK6410 board which is based on
+ * Samsung's S3C6410 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "s3c6410.dtsi"
+
+/ {
+	model = "SAMSUNG SMDK6410 board based on S3C6410";
+	compatible = "samsung,mini6410", "samsung,s3c6410";
+
+	memory {
+		reg = <0x50000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fin_pll: oscillator@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			clock-frequency = <12000000>;
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		xusbxti: oscillator@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			clock-output-names = "xusbxti";
+			clock-frequency = <48000000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	srom-cs1@18000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x18000000 0x8000000>;
+		ranges;
+
+		ethernet@18000000 {
+			compatible = "smsc,lan9115";
+			reg = <0x18000000 0x10000>;
+			interrupt-parent = <&gpn>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,force-internal-phy;
+		};
+	};
+};
+
+&sdhci0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+	status = "okay";
+};
diff --git a/src/arm/s3c6410.dtsi b/src/arm/s3c6410.dtsi
new file mode 100644
index 000000000000..eb4226b3407c
--- /dev/null
+++ b/src/arm/s3c6410.dtsi
@@ -0,0 +1,57 @@
+/*
+ * Samsung's S3C6410 SoC device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C6410 SoC device nodes are listed in this file. S3C6410
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C6410 SoC. As device tree coverage for S3C6410 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "s3c64xx.dtsi"
+
+/ {
+	compatible = "samsung,s3c6410";
+
+	aliases {
+		i2c1 = &i2c1;
+	};
+};
+
+&vic0 {
+	valid-mask = <0xffffff7f>;
+	valid-wakeup-mask = <0x00200004>;
+};
+
+&vic1 {
+	valid-mask = <0xffffffff>;
+	valid-wakeup-mask = <0x53020000>;
+};
+
+&soc {
+	clocks: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6410-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	i2c1: i2c@7f00f000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x7f00f000 0x1000>;
+		interrupt-parent = <&vic0>;
+		interrupts = <5>;
+		clock-names = "i2c";
+		clocks = <&clocks PCLK_IIC1>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/src/arm/s3c64xx-pinctrl.dtsi b/src/arm/s3c64xx-pinctrl.dtsi
new file mode 100644
index 000000000000..b1197d8b04de
--- /dev/null
+++ b/src/arm/s3c64xx-pinctrl.dtsi
@@ -0,0 +1,687 @@
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ * - pin control-related definitions
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoCs pin banks, pin-mux and pin-config options are
+ * listed as device tree nodes in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define PIN_PULL_NONE	0
+#define PIN_PULL_DOWN	1
+#define PIN_PULL_UP	2
+
+&pinctrl0 {
+	/*
+	 * Pin banks
+	 */
+
+	gpa: gpa {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc: gpc {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd: gpd {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe: gpe {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpf: gpf {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg: gpg {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph: gph {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpi: gpi {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpj: gpj {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpk: gpk {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpl: gpl {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm: gpm {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpn: gpn {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpo: gpo {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp: gpp {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq: gpq {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/*
+	 * Pin groups
+	 */
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa-0", "gpa-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa-2", "gpa-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa-4", "gpa-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa-6", "gpa-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ext_dma_0: ext-dma-0 {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ext_dma_1: ext-dma-1 {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_data_0: irda-data-0 {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_data_1: irda-data-1 {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	irda_sdbw: irda-sdbw {
+		samsung,pins = "gpb-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb-5", "gpb-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		/* S3C6410-only */
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <6>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi0_cs: spi0-cs {
+		samsung,pins = "gpc-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	spi1_cs: spi1-cs {
+		samsung,pins = "gpc-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpg-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpg-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_bus1: sd0-bus1 {
+		samsung,pins = "gpg-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_bus4: sd0-bus4 {
+		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpg-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gph-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gph-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus1: sd1-bus1 {
+		samsung,pins = "gph-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus4: sd1-bus4 {
+		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_bus8: sd1-bus8 {
+		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
+				"gph-6", "gph-7", "gph-8", "gph-9";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpg-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_UP>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_bus1: sd2-bus1 {
+		samsung,pins = "gph-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	sd2_bus4: sd2-bus4 {
+		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s0_cdclk: i2s0-cdclk {
+		samsung,pins = "gpd-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s1_cdclk: i2s1-cdclk {
+		samsung,pins = "gpe-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		/* S3C6410-only */
+		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
+				"gph-8", "gph-9";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	i2s2_cdclk: i2s2-cdclk {
+		/* S3C6410-only */
+		samsung,pins = "gph-7";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm0_bus: pcm0-bus {
+		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm0_extclk: pcm0-extclk {
+		samsung,pins = "gpd-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pcm1_extclk: pcm1-extclk {
+		samsung,pins = "gpe-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ac97_bus_0: ac97-bus-0 {
+		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	ac97_bus_1: ac97-bus-1 {
+		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_port: cam-port {
+		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
+				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
+				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_rst: cam-rst {
+		samsung,pins = "gpf-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	cam_field: cam-field {
+		/* S3C6410-only */
+		samsung,pins = "gpb-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm_extclk: pwm-extclk {
+		samsung,pins = "gpf-13";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpf-14";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpf-15";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	clkout0: clkout-0 {
+		samsung,pins = "gpf-14";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col0_0: keypad-col0-0 {
+		samsung,pins = "gph-0";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col1_0: keypad-col1-0 {
+		samsung,pins = "gph-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col2_0: keypad-col2-0 {
+		samsung,pins = "gph-2";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col3_0: keypad-col3-0 {
+		samsung,pins = "gph-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col4_0: keypad-col4-0 {
+		samsung,pins = "gph-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col5_0: keypad-col5-0 {
+		samsung,pins = "gph-5";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col6_0: keypad-col6-0 {
+		samsung,pins = "gph-6";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col7_0: keypad-col7-0 {
+		samsung,pins = "gph-7";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col0_1: keypad-col0-1 {
+		samsung,pins = "gpl-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col1_1: keypad-col1-1 {
+		samsung,pins = "gpl-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col2_1: keypad-col2-1 {
+		samsung,pins = "gpl-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col3_1: keypad-col3-1 {
+		samsung,pins = "gpl-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col4_1: keypad-col4-1 {
+		samsung,pins = "gpl-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col5_1: keypad-col5-1 {
+		samsung,pins = "gpl-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col6_1: keypad-col6-1 {
+		samsung,pins = "gpl-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_col7_1: keypad-col7-1 {
+		samsung,pins = "gpl-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row0_0: keypad-row0-0 {
+		samsung,pins = "gpk-8";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row1_0: keypad-row1-0 {
+		samsung,pins = "gpk-9";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row2_0: keypad-row2-0 {
+		samsung,pins = "gpk-10";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row3_0: keypad-row3-0 {
+		samsung,pins = "gpk-11";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row4_0: keypad-row4-0 {
+		samsung,pins = "gpk-12";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row5_0: keypad-row5-0 {
+		samsung,pins = "gpk-13";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row6_0: keypad-row6-0 {
+		samsung,pins = "gpk-14";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row7_0: keypad-row7-0 {
+		samsung,pins = "gpk-15";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row0_1: keypad-row0-1 {
+		samsung,pins = "gpn-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row1_1: keypad-row1-1 {
+		samsung,pins = "gpn-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row2_1: keypad-row2-1 {
+		samsung,pins = "gpn-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row3_1: keypad-row3-1 {
+		samsung,pins = "gpn-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row4_1: keypad-row4-1 {
+		samsung,pins = "gpn-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row5_1: keypad-row5-1 {
+		samsung,pins = "gpn-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row6_1: keypad-row6-1 {
+		samsung,pins = "gpn-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	keypad_row7_1: keypad-row7-1 {
+		samsung,pins = "gpn-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_ctrl: lcd-ctrl {
+		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data16: lcd-data-width16 {
+		samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
+				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
+				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
+				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data18: lcd-data-width18 {
+		samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
+				"gpi-6", "gpi-7", "gpi-10", "gpi-11",
+				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
+				"gpj-2", "gpj-3", "gpj-4", "gpj-5",
+				"gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	lcd_data24: lcd-data-width24 {
+		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
+				"gpi-4", "gpi-5", "gpi-6", "gpi-7",
+				"gpi-8", "gpi-9", "gpi-10", "gpi-11",
+				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
+				"gpj-0", "gpj-1", "gpj-2", "gpj-3",
+				"gpj-4", "gpj-5", "gpj-6", "gpj-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+
+	hsi_bus: hsi-bus {
+		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
+				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <PIN_PULL_NONE>;
+	};
+};
diff --git a/src/arm/s3c64xx.dtsi b/src/arm/s3c64xx.dtsi
new file mode 100644
index 000000000000..0ccb414cd268
--- /dev/null
+++ b/src/arm/s3c64xx.dtsi
@@ -0,0 +1,202 @@
+/*
+ * Samsung's S3C64xx SoC series common device tree source
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * Samsung's S3C64xx SoC series device nodes are listed in this file.
+ * Particular SoCs from S3C64xx series can include this file and provide
+ * values for SoCs specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S3C64xx SoCs. As device tree coverage for S3C64xx increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		pinctrl0 = &pinctrl0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s", "arm,arm1176";
+			reg = <0x0>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic0: interrupt-controller@71200000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x71200000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@71300000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0x71300000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		sdhci0: sdhci@7c200000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c200000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+					<&clocks SCLK_MMC0>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@7c300000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c300000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <25>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+					<&clocks SCLK_MMC1>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@7c400000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0x7c400000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <17>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks HCLK_HSMMC2>, <&clocks HCLK_HSMMC2>,
+					<&clocks SCLK_MMC2>;
+			status = "disabled";
+		};
+
+		watchdog: watchdog@7e004000 {
+			compatible = "samsung,s3c2410-wdt";
+			reg = <0x7e004000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+			clock-names = "watchdog";
+			clocks = <&clocks PCLK_WDT>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7f004000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x7f004000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <18>;
+			clock-names = "i2c";
+			clocks = <&clocks PCLK_IIC0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@7f005000 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <5>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart1: serial@7f005400 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005400 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <6>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart2: serial@7f005800 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005800 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <7>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		uart3: serial@7f005c00 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005c00 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <8>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+					<&clocks SCLK_UART>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7f006000 {
+			compatible = "samsung,s3c6400-pwm";
+			reg = <0x7f006000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <23>, <24>, <25>, <27>, <28>;
+			clock-names = "timers";
+			clocks = <&clocks PCLK_PWM>;
+			samsung,pwm-outputs = <0>, <1>;
+			#pwm-cells = <3>;
+		};
+
+		pinctrl0: pinctrl@7f008000 {
+			compatible = "samsung,s3c64xx-pinctrl";
+			reg = <0x7f008000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <21>;
+
+			pctrl_int_map: pinctrl-interrupt-map {
+				interrupt-map = <0 &vic0 0>,
+						<1 &vic0 1>,
+						<2 &vic1 0>,
+						<3 &vic1 1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,s3c64xx-wakeup-eint";
+				interrupts = <0>, <1>, <2>, <3>;
+				interrupt-parent = <&pctrl_int_map>;
+			};
+		};
+	};
+};
+
+#include "s3c64xx-pinctrl.dtsi"
diff --git a/src/arm/s5pv210-aquila.dts b/src/arm/s5pv210-aquila.dts
new file mode 100644
index 000000000000..f00cea7aca2f
--- /dev/null
+++ b/src/arm/s5pv210-aquila.dts
@@ -0,0 +1,393 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Samsung Aquila board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "Samsung Aquila based on S5PC110";
+	compatible = "samsung,aquila", "samsung,s5pv210";
+
+	aliases {
+		i2c3 = &i2c_pmic;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x30000000 0x05000000
+			0x40000000 0x18000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vtf_reg: fixed-regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "V_TF_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpios = <&mp05 4 0>;
+			enable-active-high;
+		};
+
+		pda_reg: fixed-regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VCC_1.8V_PDA";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			reg = <1>;
+		};
+
+		bat_reg: fixed-regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "V_BAT";
+			regulator-min-microvolt = <3700000>;
+			regulator-max-microvolt = <3700000>;
+			reg = <2>;
+		};
+	};
+
+	i2c_pmic: i2c-pmic {
+		compatible = "i2c-gpio";
+		gpios = <&gpj4 0 0>, /* sda */
+			<&gpj4 3 0>; /* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "national,lp3974";
+			reg = <0x66>;
+
+			max8998,pmic-buck1-default-dvs-idx = <0>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
+							<&gph0 4 0>;
+			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
+							<1200000>, <1200000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VCC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VCC_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC+VCAM_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_IO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "CAM_ISP_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "CAM_A_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "CAM_CIF_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "CAM_8M_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VARM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VINT_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "CAM_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vichg_reg: ENVICHG {
+					regulator-name = "VICHG";
+				};
+
+				safeout1_reg: ESAFEOUT1 {
+					regulator-name = "SAFEOUT1";
+					regulator-always-on;
+				};
+
+				safeout2_reg: ESAFEOUT2 {
+					regulator-name = "SAFEOUT2";
+					regulator-boot-on;
+				};
+			};
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gph2 6 1>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	linux,input-wakeup;
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
+	status = "okay";
+
+	key_1 {
+		keypad,row = <0>;
+		keypad,column = <1>;
+		linux,code = <KEY_CONNECT>;
+	};
+
+	key_2 {
+		keypad,row = <0>;
+		keypad,column = <2>;
+		linux,code = <KEY_BACK>;
+	};
+
+	key_3 {
+		keypad,row = <1>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+
+	key_4 {
+		keypad,row = <1>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEUP>;
+	};
+
+	key_5 {
+		keypad,row = <2>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key_6 {
+		keypad,row = <2>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+	vmmc-supply = <&ldo5_reg>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+	pinctrl-names = "default";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gph3 4 1>;
+	vmmc-supply = <&vtf_reg>;
+	cd-inverted;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&onenand {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo3_reg>;
+	vusb_d-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <0>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <16>;
+			hback-porch = <16>;
+			hsync-len = <2>;
+			vback-porch = <3>;
+			vfront-porch = <28>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&pinctrl0 {
+	t_flash_detect: t-flash-detect {
+		samsung,pins = "gph3-4";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+	};
+};
diff --git a/src/arm/s5pv210-goni.dts b/src/arm/s5pv210-goni.dts
new file mode 100644
index 000000000000..a3d4643b202e
--- /dev/null
+++ b/src/arm/s5pv210-goni.dts
@@ -0,0 +1,450 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Samsung Goni board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "Samsung Goni based on S5PC110";
+	compatible = "samsung,goni", "samsung,s5pv210";
+
+	aliases {
+		i2c3 = &i2c_pmic;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x30000000 0x05000000
+			0x40000000 0x10000000
+			0x50000000 0x08000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vtf_reg: fixed-regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "V_TF_2.8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			reg = <0>;
+			gpios = <&mp05 4 0>;
+			enable-active-high;
+		};
+
+		pda_reg: fixed-regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VCC_1.8V_PDA";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			reg = <1>;
+		};
+
+		bat_reg: fixed-regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "V_BAT";
+			regulator-min-microvolt = <3700000>;
+			regulator-max-microvolt = <3700000>;
+			reg = <2>;
+		};
+
+		tsp_reg: fixed-regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "TSP_VDD";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			reg = <3>;
+			gpios = <&gpj1 3 0>;
+			enable-active-high;
+		};
+	};
+
+	i2c_pmic: i2c-pmic {
+		compatible = "i2c-gpio";
+		gpios = <&gpj4 0 0>, /* sda */
+			<&gpj4 3 0>; /* scl */
+		i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "national,lp3974";
+			reg = <0x66>;
+
+			max8998,pmic-buck1-default-dvs-idx = <0>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
+							<&gph0 4 0>;
+			max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
+							<1200000>, <1200000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
+			max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB+MIPI_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VCC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VLCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB+VDAC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC+VCAM_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-boot-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_IO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "CAM_ISP_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "CAM_A_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "CAM_CIF_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_AF_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VMIPI_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "CAM_8M_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "VARM_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "VINT_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "CAM_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power-key {
+			gpios = <&gph2 6 1>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	linux,input-wakeup;
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
+	status = "okay";
+
+	key_1 {
+		keypad,row = <0>;
+		keypad,column = <1>;
+		linux,code = <KEY_CONNECT>;
+	};
+
+	key_2 {
+		keypad,row = <0>;
+		keypad,column = <2>;
+		linux,code = <KEY_BACK>;
+	};
+
+	key_3 {
+		keypad,row = <1>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA_FOCUS>;
+	};
+
+	key_4 {
+		keypad,row = <1>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEUP>;
+	};
+
+	key_5 {
+		keypad,row = <2>;
+		keypad,column = <1>;
+		linux,code = <KEY_CAMERA>;
+	};
+
+	key_6 {
+		keypad,row = <2>;
+		keypad,column = <2>;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&ldo5_reg>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gph3 4 1>;
+	vmmc-supply = <&vtf_reg>;
+	cd-inverted;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo3_reg>;
+	vusb_d-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&i2c2 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	samsung,i2c-slave-addr = <0x10>;
+	status = "okay";
+
+	tsp@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&gpj0>;
+		interrupts = <5 2>;
+
+		atmel,x-line = <17>;
+		atmel,y-line = <11>;
+		atmel,x-size = <800>;
+		atmel,y-size = <480>;
+		atmel,burst-length = <0x21>;
+		atmel,threshold = <0x28>;
+		atmel,orientation = <1>;
+
+		vdd-supply = <&tsp_reg>;
+	};
+};
+
+&i2c0 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <100000>;
+	samsung,i2c-slave-addr = <0x10>;
+	status = "okay";
+
+	noon010pc30: sensor@30 {
+		compatible = "siliconfile,noon010pc30";
+		reg = <0x30>;
+		vddio-supply = <&ldo11_reg>;
+		vdda-supply = <&ldo13_reg>;
+		vdd_core-supply = <&ldo14_reg>;
+
+		clock-frequency = <16000000>;
+		clocks = <&clock_cam 0>;
+		clock-names = "mclk";
+		nreset-gpios = <&gpb 2 0>;
+		nstby-gpios = <&gpb 0 0>;
+
+		port {
+			noon010pc30_ep: endpoint {
+				remote-endpoint = <&fimc0_ep>;
+				bus-width = <8>;
+				hsync-active = <0>;
+				vsync-active = <1>;
+				pclk-sample = <1>;
+			};
+		};
+	};
+};
+
+&camera {
+	pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
+	pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
+	pinctrl-names = "default", "idle";
+
+	parallel-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* camera A input */
+		port@1 {
+			reg = <1>;
+			fimc0_ep: endpoint {
+				remote-endpoint = <&noon010pc30_ep>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				pclk-sample = <0>;
+			};
+		};
+	};
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			/* 480x800@55Hz */
+			clock-frequency = <23439570>;
+			hactive = <480>;
+			hfront-porch = <16>;
+			hback-porch = <16>;
+			hsync-len = <2>;
+			vactive = <800>;
+			vback-porch = <2>;
+			vfront-porch = <28>;
+			vsync-len = <1>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <0>;
+			pixelclk-active = <0>;
+		};
+	};
+};
+
+&onenand {
+	status = "okay";
+};
diff --git a/src/arm/s5pv210-pinctrl.dtsi b/src/arm/s5pv210-pinctrl.dtsi
new file mode 100644
index 000000000000..8c714088e3c6
--- /dev/null
+++ b/src/arm/s5pv210-pinctrl.dtsi
@@ -0,0 +1,839 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&pinctrl0 {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj2: gpj2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj3: gpj3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpgi: gpgi {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp01: mp01 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp02: mp02 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp03: mp03 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp04: mp04 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp05: mp05 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp06: mp06 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	mp07: mp07 {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gph0: gph0 {
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&vic0>;
+		interrupts = <0>, <1>, <2>, <3>,
+				<4>, <5>, <6>, <7>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1 {
+		gpio-controller;
+		interrupt-controller;
+		interrupt-parent = <&vic0>;
+		interrupts = <8>, <9>, <10>, <11>,
+				<12>, <13>, <14>, <15>;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	gph2: gph2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	gph3: gph3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart_audio: uart-audio {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s0_bus: i2s0-bus {
+		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
+				"gpi-4", "gpi-5", "gpi-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s1_bus: i2s1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm1_bus: pcm1-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	ac97_bus: ac97-bus {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2s2_bus: i2s2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pcm2_bus: pcm2-bus {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spdif_bus: spdif-bus {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+		samsung,pin-function = <5>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpd1-4", "gpd1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row0: keypad-row-0 {
+		samsung,pins = "gph3-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row1: keypad-row-1 {
+		samsung,pins = "gph3-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row2: keypad-row-2 {
+		samsung,pins = "gph3-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row3: keypad-row-3 {
+		samsung,pins = "gph3-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row4: keypad-row-4 {
+		samsung,pins = "gph3-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row5: keypad-row-5 {
+		samsung,pins = "gph3-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row6: keypad-row-6 {
+		samsung,pins = "gph3-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_row7: keypad-row-7 {
+		samsung,pins = "gph3-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col0: keypad-col-0 {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col1: keypad-col-1 {
+		samsung,pins = "gph2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col2: keypad-col-2 {
+		samsung,pins = "gph2-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col3: keypad-col-3 {
+		samsung,pins = "gph2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col4: keypad-col-4 {
+		samsung,pins = "gph2-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col5: keypad-col-5 {
+		samsung,pins = "gph2-5";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col6: keypad-col-6 {
+		samsung,pins = "gph2-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	keypad_col7: keypad-col-7 {
+		samsung,pins = "gph2-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpg0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpg0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpg0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpg1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpg1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_cd: sd1-cd {
+		samsung,pins = "gpg1-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpg1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpg2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpg2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpg2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpg2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus8: sd2-bus-width8 {
+		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_clk: sd3-clk {
+		samsung,pins = "gpg3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_cmd: sd3-cmd {
+		samsung,pins = "gpg3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_cd: sd3-cd {
+		samsung,pins = "gpg3-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_bus1: sd3-bus-width1 {
+		samsung,pins = "gpg3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd3_bus4: sd3-bus-width4 {
+		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <2>;
+		samsung,pin-drv = <3>;
+	};
+
+	eint0: ext-int0 {
+		samsung,pins = "gph0-0";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint8: ext-int8 {
+		samsung,pins = "gph1-0";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint15: ext-int15 {
+		samsung,pins = "gph1-7";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint16: ext-int16 {
+		samsung,pins = "gph2-0";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	eint31: ext-int31 {
+		samsung,pins = "gph3-7";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_a_io: cam-port-a-io {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_a_clk_active: cam-port-a-clk-active {
+		samsung,pins = "gpe1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_a_clk_idle: cam-port-a-clk-idle {
+		samsung,pins = "gpe1-3";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_io: cam-port-b-io {
+		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+		lcd_ctrl: lcd-ctrl {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lcd_sync: lcd-sync {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lcd_clk: lcd-clk {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	lcd_data24: lcd-data-width24 {
+		samsung,pins =  "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/src/arm/s5pv210-smdkc110.dts b/src/arm/s5pv210-smdkc110.dts
new file mode 100644
index 000000000000..1eedab7ffe94
--- /dev/null
+++ b/src/arm/s5pv210-smdkc110.dts
@@ -0,0 +1,78 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for YIC System SMDC110 board.
+ *
+ * NOTE: This file is completely based on original board file for mach-smdkc110
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "YIC System SMDKC110 based on S5PC110";
+	compatible = "yic,smdkc110", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	audio-codec@1b {
+		compatible = "wlf,wm8580";
+		reg = <0x1b>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/src/arm/s5pv210-smdkv210.dts b/src/arm/s5pv210-smdkv210.dts
new file mode 100644
index 000000000000..da7d210df670
--- /dev/null
+++ b/src/arm/s5pv210-smdkv210.dts
@@ -0,0 +1,239 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for YIC System SMDV210 board.
+ *
+ * NOTE: This file is completely based on original board file for mach-smdkv210
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "YIC System SMDKV210 based on S5PV210";
+	compatible = "yic,smdkv210", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x40000000>;
+	};
+
+	ethernet@18000000 {
+		compatible = "davicom,dm9000";
+		reg = <0xA8000000 0x2 0xA8000002 0x2>;
+		interrupt-parent = <&gph1>;
+		interrupts = <1 4>;
+		local-mac-address = [00 00 de ad be ef];
+		davicom,no-eeprom;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_out>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&keypad {
+	linux,input-no-autorepeat;
+	linux,input-wakeup;
+	samsung,keypad-num-rows = <8>;
+	samsung,keypad-num-columns = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
+			<&keypad_row3>, <&keypad_row4>, <&keypad_row5>,
+			<&keypad_row6>, <&keypad_row7>,
+			<&keypad_col0>, <&keypad_col1>, <&keypad_col2>,
+			<&keypad_col3>, <&keypad_col4>, <&keypad_col5>,
+			<&keypad_col6>, <&keypad_col7>;
+	status = "okay";
+
+	key_1 {
+		keypad,row = <0>;
+		keypad,column = <3>;
+		linux,code = <KEY_1>;
+	};
+
+	key_2 {
+		keypad,row = <0>;
+		keypad,column = <4>;
+		linux,code = <KEY_2>;
+	};
+
+	key_3 {
+		keypad,row = <0>;
+		keypad,column = <5>;
+		linux,code = <KEY_3>;
+	};
+
+	key_4 {
+		keypad,row = <0>;
+		keypad,column = <6>;
+		linux,code = <KEY_4>;
+	};
+
+	key_5 {
+		keypad,row = <0
+		>;
+		keypad,column = <7>;
+		linux,code = <KEY_5>;
+	};
+
+	key_6 {
+		keypad,row = <1>;
+		keypad,column = <3>;
+		linux,code = <KEY_A>;
+	};
+	key_7 {
+		keypad,row = <1>;
+		keypad,column = <4>;
+		linux,code = <KEY_B>;
+	};
+
+	key_8 {
+		keypad,row = <1>;
+		keypad,column = <5>;
+		linux,code = <KEY_C>;
+	};
+
+	key_9 {
+		keypad,row = <1>;
+		keypad,column = <6>;
+		linux,code = <KEY_D>;
+	};
+
+	key_10 {
+		keypad,row = <1>;
+		keypad,column = <7>;
+		linux,code = <KEY_E>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci3 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&hsotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display-timings {
+		native-mode = <&timing0>;
+
+		timing0: timing@0 {
+			/* 800x480@60Hz */
+			clock-frequency = <24373920>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <8>;
+			hback-porch = <13>;
+			hsync-len = <3>;
+			vback-porch = <7>;
+			vfront-porch = <5>;
+			vsync-len = <1>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+};
+
+&pwm {
+	samsung,pwm-outputs = <3>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	audio-codec@1b {
+		compatible = "wlf,wm8580";
+		reg = <0x1b>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/src/arm/s5pv210-torbreck.dts b/src/arm/s5pv210-torbreck.dts
new file mode 100644
index 000000000000..622599fd2cfa
--- /dev/null
+++ b/src/arm/s5pv210-torbreck.dts
@@ -0,0 +1,92 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Board device tree source for Torbreck board.
+ *
+ * NOTE: This file is completely based on original board file for mach-torbreck
+ * available in Linux 3.15 and intends to provide equivalent level of hardware
+ * support. Due to lack of hardware, _no_ testing has been performed.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "s5pv210.dtsi"
+
+/ {
+	model = "aESOP Torbreck based on S5PV210";
+	compatible = "aesop,torbreck", "samsung,s5pv210";
+
+	chosen {
+		bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhci3 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2s0 {
+	status = "okay";
+};
diff --git a/src/arm/s5pv210.dtsi b/src/arm/s5pv210.dtsi
new file mode 100644
index 000000000000..8344a0ee2b86
--- /dev/null
+++ b/src/arm/s5pv210.dtsi
@@ -0,0 +1,633 @@
+/*
+ * Samsung's S5PV210 SoC device tree source
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
+ *
+ * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ *
+ * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/s5pv210.h>
+#include <dt-bindings/clock/s5pv210-audss.h>
+
+/ {
+	aliases {
+		csis0 = &csis0;
+		fimc0 = &fimc0;
+		fimc1 = &fimc1;
+		fimc2 = &fimc2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2s0 = &i2s0;
+		i2s1 = &i2s1;
+		i2s2 = &i2s2;
+		pinctrl0 = &pinctrl0;
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		external-clocks {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			xxti: oscillator@0 {
+				compatible = "fixed-clock";
+				reg = <0>;
+				clock-frequency = <0>;
+				clock-output-names = "xxti";
+				#clock-cells = <0>;
+			};
+
+			xusbxti: oscillator@1 {
+				compatible = "fixed-clock";
+				reg = <1>;
+				clock-frequency = <0>;
+				clock-output-names = "xusbxti";
+				#clock-cells = <0>;
+			};
+		};
+
+		onenand: onenand@b0000000 {
+			compatible = "samsung,s5pv210-onenand";
+			reg = <0xb0600000 0x2000>,
+				<0xb0000000 0x20000>,
+				<0xb0040000 0x20000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <31>;
+			clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
+			clock-names = "bus", "onenand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		chipid@e0000000 {
+			compatible = "samsung,s5pv210-chipid";
+			reg = <0xe0000000 0x1000>;
+		};
+
+		clocks: clock-controller@e0100000 {
+			compatible = "samsung,s5pv210-clock", "simple-bus";
+			reg = <0xe0100000 0x10000>;
+			clock-names = "xxti", "xusbxti";
+			clocks = <&xxti>, <&xusbxti>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pmu_syscon: syscon@e0108000 {
+				compatible = "samsung-s5pv210-pmu", "syscon";
+				reg = <0xe0108000 0x8000>;
+			};
+		};
+
+		pinctrl0: pinctrl@e0200000 {
+			compatible = "samsung,s5pv210-pinctrl";
+			reg = <0xe0200000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <30>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupts = <16>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+
+		amba {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "arm,amba-bus";
+			ranges;
+
+			pdma0: dma@e0900000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xe0900000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <19>;
+				clocks = <&clocks CLK_PDMA0>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+
+			pdma1: dma@e0a00000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xe0a00000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <20>;
+				clocks = <&clocks CLK_PDMA1>;
+				clock-names = "apb_pclk";
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		spi0: spi@e1300000 {
+			compatible = "samsung,s5pv210-spi";
+			reg = <0xe1300000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <15>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi1: spi@e1400000 {
+			compatible = "samsung,s5pv210-spi";
+			reg = <0xe1400000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <16>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		keypad: keypad@e1600000 {
+			compatible = "samsung,s5pv210-keypad";
+			reg = <0xe1600000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <25>;
+			clocks = <&clocks CLK_KEYIF>;
+			clock-names = "keypad";
+			status = "disabled";
+		};
+
+		i2c0: i2c@e1800000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xe1800000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <14>;
+			clocks = <&clocks CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e1a00000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xe1a00000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-0 = <&i2c2_bus>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		audio-subsystem {
+			compatible = "samsung,s5pv210-audss", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clk_audss: clock-controller@eee10000 {
+				compatible = "samsung,s5pv210-audss-clock";
+				reg = <0xeee10000 0x1000>;
+				clock-names = "hclk", "xxti",
+						"fout_epll",
+						"sclk_audio0";
+				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+						<&clocks FOUT_EPLL>,
+						<&clocks SCLK_AUDIO0>;
+				#clock-cells = <1>;
+			};
+
+			i2s0: i2s@eee30000 {
+				compatible = "samsung,s5pv210-i2s";
+				reg = <0xeee30000 0x1000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <16>;
+				dma-names = "rx", "tx", "tx-sec";
+				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+				clock-names = "iis",
+						"i2s_opclk0",
+						"i2s_opclk1";
+				clocks = <&clk_audss CLK_I2S>,
+						<&clk_audss CLK_I2S>,
+						<&clk_audss CLK_DOUT_AUD_BUS>;
+				samsung,idma-addr = <0xc0010000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2s0_bus>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		i2s1: i2s@e2100000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0xe2100000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <17>;
+			dma-names = "rx", "tx";
+			dmas = <&pdma1 12>, <&pdma1 13>;
+			clock-names = "iis", "i2s_opclk0";
+			clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		i2s2: i2s@e2a00000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0xe2a00000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <18>;
+			dma-names = "rx", "tx";
+			dmas = <&pdma1 14>, <&pdma1 15>;
+			clock-names = "iis", "i2s_opclk0";
+			clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@e2500000 {
+			compatible = "samsung,s5pc100-pwm";
+			reg = <0xe2500000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <21>, <22>, <23>, <24>, <25>;
+			clock-names = "timers";
+			clocks = <&clocks CLK_PWM>;
+			#pwm-cells = <3>;
+		};
+
+		watchdog: watchdog@e2700000 {
+			compatible = "samsung,s3c2410-wdt";
+			reg = <0xe2700000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <26>;
+			clock-names = "watchdog";
+			clocks = <&clocks CLK_WDT>;
+		};
+
+		rtc: rtc@e2800000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0xe2800000 0x100>;
+			interrupt-parent = <&vic0>;
+			interrupts = <28>, <29>;
+			clocks = <&clocks CLK_RTC>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		uart0: serial@e2900000 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900000 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <10>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>,
+					<&clocks SCLK_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@e2900400 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900400 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <11>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>,
+					<&clocks SCLK_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@e2900800 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900800 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <12>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>,
+					<&clocks SCLK_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@e2900c00 {
+			compatible = "samsung,s5pv210-uart";
+			reg = <0xe2900c00 0x400>;
+			interrupt-parent = <&vic1>;
+			interrupts = <13>;
+			clock-names = "uart", "clk_uart_baud0",
+					"clk_uart_baud1";
+			clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>,
+					<&clocks SCLK_UART3>;
+			status = "disabled";
+		};
+
+		sdhci0: sdhci@eb000000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb000000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <26>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>,
+					<&clocks SCLK_MMC0>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@eb100000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb100000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>,
+					<&clocks SCLK_MMC1>;
+			status = "disabled";
+		};
+
+		sdhci2: sdhci@eb200000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb200000 0x100000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <28>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
+			clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>,
+					<&clocks SCLK_MMC2>;
+			status = "disabled";
+		};
+
+		sdhci3: sdhci@eb300000 {
+			compatible = "samsung,s3c6410-sdhci";
+			reg = <0xeb300000 0x100000>;
+			interrupt-parent = <&vic3>;
+			interrupts = <2>;
+			clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3";
+			clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>,
+					<&clocks SCLK_MMC3>;
+			status = "disabled";
+		};
+
+		hsotg: hsotg@ec000000 {
+			compatible = "samsung,s3c6400-hsotg";
+			reg = <0xec000000 0x20000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clocks = <&clocks CLK_USB_OTG>;
+			clock-names = "otg";
+			phy-names = "usb2-phy";
+			phys = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: usbphy@ec100000 {
+			compatible = "samsung,s5pv210-usb2-phy";
+			reg = <0xec100000 0x100>;
+			samsung,pmureg-phandle = <&pmu_syscon>;
+			clocks = <&clocks CLK_USB_OTG>, <&xusbxti>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ehci: ehci@ec200000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0xec200000 0x100>;
+			interrupts = <23>;
+			interrupt-parent = <&vic1>;
+			clocks = <&clocks CLK_USB_HOST>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				phys = <&usbphy 1>;
+			};
+		};
+
+		ohci: ohci@ec300000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0xec300000 0x100>;
+			interrupts = <23>;
+			clocks = <&clocks CLK_USB_HOST>;
+			clock-names = "usbhost";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				phys = <&usbphy 1>;
+			};
+		};
+
+		mfc: codec@f1700000 {
+			compatible = "samsung,mfc-v5";
+			reg = <0xf1700000 0x10000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <14>;
+			clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>;
+			clock-names = "sclk_mfc", "mfc";
+		};
+
+		vic0: interrupt-controller@f2000000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@f2100000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic2: interrupt-controller@f2200000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2200000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic3: interrupt-controller@f2300000 {
+			compatible = "arm,pl192-vic";
+			interrupt-controller;
+			reg = <0xf2300000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		fimd: fimd@f8000000 {
+			compatible = "samsung,exynos4210-fimd";
+			interrupt-parent = <&vic2>;
+			reg = <0xf8000000 0x20000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <0>, <1>, <2>;
+			clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>;
+			clock-names = "sclk_fimd", "fimd";
+			status = "disabled";
+		};
+
+		g2d: g2d@fa000000 {
+			compatible = "samsung,s5pv210-g2d";
+			reg = <0xfa000000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <9>;
+			clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>;
+			clock-names = "sclk_fimg2d", "fimg2d";
+		};
+
+		mdma1: mdma@fa200000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xfa200000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <18>;
+			clocks = <&clocks CLK_MDMA>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		i2c1: i2c@fab00000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0xfab00000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <13>;
+			clocks = <&clocks CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		camera: camera {
+			compatible = "samsung,fimc", "simple-bus";
+			pinctrl-names = "default";
+			pinctrl-0 = <>;
+			clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
+			clock-names = "sclk_cam0", "sclk_cam1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clock_cam: clock-controller {
+				#clock-cells = <1>;
+			};
+
+			csis0: csis@fa600000 {
+				compatible = "samsung,s5pv210-csis";
+				reg = <0xfa600000 0x4000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <29>;
+				clocks = <&clocks CLK_CSIS>,
+						<&clocks SCLK_CSIS>;
+				clock-names = "clk_csis",
+						"sclk_csis";
+				bus-width = <4>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			fimc0: fimc@fb200000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb200000 0x1000>;
+				interrupts = <5>;
+				interrupt-parent = <&vic2>;
+				clocks = <&clocks CLK_FIMC0>,
+						<&clocks SCLK_FIMC0>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,mainscaler-ext;
+				samsung,cam-if;
+			};
+
+			fimc1: fimc@fb300000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb300000 0x1000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <6>;
+				clocks = <&clocks CLK_FIMC1>,
+						<&clocks SCLK_FIMC1>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,mainscaler-ext;
+				samsung,cam-if;
+			};
+
+			fimc2: fimc@fb400000 {
+				compatible = "samsung,s5pv210-fimc";
+				reg = <0xfb400000 0x1000>;
+				interrupt-parent = <&vic2>;
+				interrupts = <7>;
+				clocks = <&clocks CLK_FIMC2>,
+						<&clocks SCLK_FIMC2>;
+				clock-names = "fimc",
+						"sclk_fimc";
+				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,mainscaler-ext;
+				samsung,lcd-wb;
+			};
+		};
+	};
+};
+
+#include "s5pv210-pinctrl.dtsi"
diff --git a/src/arm/sama5d3.dtsi b/src/arm/sama5d3.dtsi
index 45013b867c8d..261311bdf65b 100644
--- a/src/arm/sama5d3.dtsi
+++ b/src/arm/sama5d3.dtsi
@@ -78,6 +78,11 @@
 		};
 	};
 
+	sram: sram@00300000 {
+		compatible = "mmio-sram";
+		reg = <0x00300000 0x20000>;
+	};
+
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -177,6 +182,9 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf001c000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				clocks = <&usart0_clk>;
@@ -188,6 +196,9 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0020000 0x100>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
+				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				clocks = <&usart1_clk>;
@@ -208,7 +219,20 @@
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xf0034000 0x4000>;
 				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				clocks = <&isi_clk>;
+				clock-names = "isi_clk";
 				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+
+			sfr: sfr@f0038000 {
+				compatible = "atmel,sama5d3-sfr", "syscon";
+				reg = <0xf0038000 0x60>;
 			};
 
 			mmc1: mmc@f8000000 {
@@ -333,6 +357,9 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x100>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				clocks = <&usart2_clk>;
@@ -344,6 +371,9 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x100>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
 				clocks = <&usart3_clk>;
@@ -402,14 +432,19 @@
 			};
 
 			ramc0: ramc@ffffea00 {
-				compatible = "atmel,at91sam9g45-ddramc";
+				compatible = "atmel,sama5d3-ddramc";
 				reg = <0xffffea00 0x200>;
+				clocks = <&ddrck>, <&mpddr_clk>;
+				clock-names = "ddrck", "mpddr";
 			};
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
+				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				clocks = <&dbgu_clk>;
@@ -428,7 +463,7 @@
 			pinctrl@fffff200 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
 				ranges = <0xfffff200 0xfffff200 0xa00>;
 				atmel,mux-mask = <
 					/*   A          B          C  */
@@ -528,7 +563,7 @@
 				};
 
 				isi {
-					pinctrl_isi: isi-0 {
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
 						atmel,pins =
 							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
 							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
@@ -540,13 +575,19 @@
 							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
 							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
 							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
-							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
-							 AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
+							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
 							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
 					};
-					pinctrl_isi_pck_as_mck: isi_pck_as_mck-0 {
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
 						atmel,pins =
-							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
 					};
 				};
 
@@ -1003,6 +1044,11 @@
 						reg = <2>;
 					};
 
+					hsmc_clk: hsmc_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
 					pioA_clk: pioA_clk {
 						#clock-cells = <0>;
 						reg = <6>;
@@ -1170,6 +1216,11 @@
 						#clock-cells = <0>;
 						reg = <48>;
 					};
+
+					mpddr_clk: mpddr_clk {
+						#clock-cells = <0>;
+						reg = <49>;
+					};
 				};
 			};
 
@@ -1178,6 +1229,11 @@
 				reg = <0xfffffe00 0x10>;
 			};
 
+			shutdown-controller@fffffe10 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfffffe10 0x10>;
+			};
+
 			pit: timer@fffffe30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
@@ -1393,6 +1449,7 @@
 					0xffffc000 0x00000070	/* NFC HSMC regs */
 					0x00200000 0x00100000	/* NFC SRAM banks */
 					>;
+				clocks = <&hsmc_clk>;
 			};
 		};
 	};
diff --git a/src/arm/sama5d31.dtsi b/src/arm/sama5d31.dtsi
index 7997dc9863ed..883878b32971 100644
--- a/src/arm/sama5d31.dtsi
+++ b/src/arm/sama5d31.dtsi
@@ -12,5 +12,5 @@
 #include "sama5d3_uart.dtsi"
 
 / {
-	compatible = "atmel,samad31", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
 };
diff --git a/src/arm/sama5d33.dtsi b/src/arm/sama5d33.dtsi
index 39f832253caf..4b4434aca351 100644
--- a/src/arm/sama5d33.dtsi
+++ b/src/arm/sama5d33.dtsi
@@ -10,5 +10,5 @@
 #include "sama5d3_gmac.dtsi"
 
 / {
-	compatible = "atmel,samad33", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
 };
diff --git a/src/arm/sama5d34.dtsi b/src/arm/sama5d34.dtsi
index 89cda2c0da39..aa01573fdee9 100644
--- a/src/arm/sama5d34.dtsi
+++ b/src/arm/sama5d34.dtsi
@@ -12,5 +12,5 @@
 #include "sama5d3_mci2.dtsi"
 
 / {
-	compatible = "atmel,samad34", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
 };
diff --git a/src/arm/sama5d35.dtsi b/src/arm/sama5d35.dtsi
index d20cd71b5f0e..16c39f4c96a4 100644
--- a/src/arm/sama5d35.dtsi
+++ b/src/arm/sama5d35.dtsi
@@ -14,5 +14,5 @@
 #include "sama5d3_tcb1.dtsi"
 
 / {
-	compatible = "atmel,samad35", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
 };
diff --git a/src/arm/sama5d36.dtsi b/src/arm/sama5d36.dtsi
index db58cad6acd3..e85139ef40af 100644
--- a/src/arm/sama5d36.dtsi
+++ b/src/arm/sama5d36.dtsi
@@ -16,5 +16,5 @@
 #include "sama5d3_uart.dtsi"
 
 / {
-	compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
 };
diff --git a/src/arm/sama5d3_can.dtsi b/src/arm/sama5d3_can.dtsi
index a0775851cce5..eaf41451ad0c 100644
--- a/src/arm/sama5d3_can.dtsi
+++ b/src/arm/sama5d3_can.dtsi
@@ -40,7 +40,7 @@
 						atmel,clk-output-range = <0 66000000>;
 					};
 
-					can1_clk: can0_clk {
+					can1_clk: can1_clk {
 						#clock-cells = <0>;
 						reg = <41>;
 						atmel,clk-output-range = <0 66000000>;
diff --git a/src/arm/sama5d3xcm.dtsi b/src/arm/sama5d3xcm.dtsi
index f7d8583eef82..7d6babdab039 100644
--- a/src/arm/sama5d3xcm.dtsi
+++ b/src/arm/sama5d3xcm.dtsi
@@ -8,7 +8,7 @@
  */
 
 / {
-	compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
+	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
 
 	chosen {
 		bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
@@ -36,6 +36,36 @@
 
 			macb0: ethernet@f0028000 {
 				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioB>;
+					interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+					txen-skew-ps = <800>;
+					txc-skew-ps = <3000>;
+					rxdv-skew-ps = <400>;
+					rxc-skew-ps = <3000>;
+					rxd0-skew-ps = <400>;
+					rxd1-skew-ps = <400>;
+					rxd2-skew-ps = <400>;
+					rxd3-skew-ps = <400>;
+				};
 			};
 
 			pmc: pmc@fffffc00 {
@@ -92,6 +122,7 @@
 		d2 {
 			label = "d2";
 			gpios = <&pioE 25 GPIO_ACTIVE_LOW>;	/* PE25, conflicts with A25, RXD2 */
+			linux,default-trigger = "heartbeat";
 		};
 	};
 };
diff --git a/src/arm/sama5d3xmb.dtsi b/src/arm/sama5d3xmb.dtsi
index b8c6f20e780c..83bee7a3a617 100644
--- a/src/arm/sama5d3xmb.dtsi
+++ b/src/arm/sama5d3xmb.dtsi
@@ -25,6 +25,8 @@
 			};
 
 			spi0: spi@f0004000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for spi0 */
+
 				m25p80@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
@@ -43,22 +45,50 @@
 			 */
 			i2c0: i2c@f0014000 {
 				wm8904: wm8904@1a {
-					compatible = "wm8904";
+					compatible = "wlf,wm8904";
 					reg = <0x1a>;
 					clocks = <&pck0>;
 					clock-names = "mclk";
 				};
 			};
 
+			i2c1: i2c@f0018000 {
+				ov2640: camera@0x30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
+					/* use pck1 for the master clock of ov2640 */
+					clocks = <&pck1>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pck1>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
+			};
+
 			usart1: serial@f0020000 {
+				dmas = <0>, <0>;	/*  Do not use DMA for usart1 */
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
 				status = "okay";
 			};
 
 			isi: isi@f0034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+					};
+				};
 			};
 
 			mmc1: mmc@f8000000 {
@@ -114,12 +144,17 @@
 							<AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD30 periph B */
 					};
 
-					pinctrl_isi_reset: isi_reset-0 {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PD31 periph B ISI_MCK */
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
 						atmel,pins =
 							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
 					};
 
-					pinctrl_isi_power: isi_power-0 {
+					pinctrl_sensor_power: sensor_power-0 {
 						atmel,pins =
 							<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
 					};
@@ -132,6 +167,7 @@
 			};
 
 			dbgu: serial@ffffee00 {
+				dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
 				status = "okay";
 			};
 
@@ -172,7 +208,7 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"MICBIAS", "IN1L",
+			"Mic", "MICBIAS",
 			"IN1L", "Mic";
 
 		atmel,ssc-controller = <&ssc0>;
diff --git a/src/arm/sama5d4.dtsi b/src/arm/sama5d4.dtsi
new file mode 100644
index 000000000000..d986b41b9654
--- /dev/null
+++ b/src/arm/sama5d4.dtsi
@@ -0,0 +1,1332 @@
+/*
+ * sama5d4.dtsi - Device Tree Include file for SAMA5D4 family SoC
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Atmel SAMA5D4 family SoC";
+	compatible = "atmel,sama5d4";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &usart3;
+		serial1 = &usart4;
+		serial2 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+		i2c2 = &i2c2;
+	};
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		adc_op_clk: adc_op_clk{
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+		};
+	};
+
+	ns_sram: sram@00210000 {
+		compatible = "mmio-sram";
+		reg = <0x00210000 0x10000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		usb0: gadget@00400000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "atmel,at91sam9rl-udc";
+			reg = <0x00400000 0x100000
+			       0xfc02c000 0x4000>;
+			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&udphs_clk>, <&utmi>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+
+			ep0 {
+				reg = <0>;
+				atmel,fifo-size = <64>;
+				atmel,nb-banks = <1>;
+			};
+
+			ep1 {
+				reg = <1>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep2 {
+				reg = <2>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <3>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep3 {
+				reg = <3>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep4 {
+				reg = <4>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep5 {
+				reg = <5>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep6 {
+				reg = <6>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep7 {
+				reg = <7>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-dma;
+				atmel,can-isoc;
+			};
+
+			ep8 {
+				reg = <8>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep9 {
+				reg = <9>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep10 {
+				reg = <10>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep11 {
+				reg = <11>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep12 {
+				reg = <12>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep13 {
+				reg = <13>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep14 {
+				reg = <14>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+
+			ep15 {
+				reg = <15>;
+				atmel,fifo-size = <1024>;
+				atmel,nb-banks = <2>;
+				atmel,can-isoc;
+			};
+		};
+
+		usb1: ohci@00500000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
+				 <&uhpck>;
+			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@00600000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00600000 0x100000>;
+			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&usb>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "usb_clk", "ehci_clk", "uhpck";
+			status = "disabled";
+		};
+
+		L2: cache-controller@00a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <67 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		nand0: nand@80000000 {
+			compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			reg = <	0x80000000 0x08000000	/* EBI CS3 */
+				0xfc05c070 0x00000490	/* SMC PMECC regs */
+				0xfc05c500 0x00000100	/* SMC PMECC Error Location regs */
+				>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 6>;
+			atmel,nand-addr-offset = <21>;
+			atmel,nand-cmd-offset = <22>;
+			atmel,nand-has-dma;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand>;
+			status = "disabled";
+
+			nfc@90000000 {
+				compatible = "atmel,sama5d3-nfc";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <
+					0x90000000 0x10000000	/* NFC Command Registers */
+					0xfc05c000 0x00000070	/* NFC HSMC regs */
+					0x00100000 0x00100000	/* NFC SRAM banks */
+                                         >;
+				clocks = <&hsmc_clk>;
+				atmel,write-by-sram;
+			};
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x200>;
+				interrupts = <50 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&dma1_clk>;
+				clock-names = "dma_clk";
+			};
+
+			ramc0: ramc@f0010000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf0010000 0x200>;
+				clocks = <&ddrck>, <&mpddr_clk>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0014000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0014000 0x200>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&dma0_clk>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: pmc@f0018000 {
+				compatible = "atmel,sama5d3-pmc";
+				reg = <0xf0018000 0x120>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				main_rc_osc: main_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCRCS>;
+					clock-frequency = <12000000>;
+					clock-accuracy = <100000000>;
+				};
+
+				main_osc: main_osc {
+					compatible = "atmel,at91rm9200-clk-main-osc";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCS>;
+					clocks = <&main_xtal>;
+				};
+
+				main: mainck {
+					compatible = "atmel,at91sam9x5-clk-main";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MOSCSELS>;
+					clocks = <&main_rc_osc &main_osc>;
+				};
+
+				plla: pllack {
+					compatible = "atmel,sama5d3-clk-pll";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKA>;
+					clocks = <&main>;
+					reg = <0>;
+					atmel,clk-input-range = <12000000 12000000>;
+					#atmel,pll-clk-output-range-cells = <4>;
+					atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
+				};
+
+				plladiv: plladivck {
+					compatible = "atmel,at91sam9x5-clk-plldiv";
+					#clock-cells = <0>;
+					clocks = <&plla>;
+				};
+
+				utmi: utmick {
+					compatible = "atmel,at91sam9x5-clk-utmi";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_LOCKU>;
+					clocks = <&main>;
+				};
+
+				mck: masterck {
+					compatible = "atmel,at91sam9x5-clk-master";
+					#clock-cells = <0>;
+					interrupt-parent = <&pmc>;
+					interrupts = <AT91_PMC_MCKRDY>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
+					atmel,clk-output-range = <125000000 177000000>;
+					atmel,clk-divisors = <1 2 4 3>;
+				};
+
+				h32ck: h32mxck {
+					#clock-cells = <0>;
+					compatible = "atmel,sama5d4-clk-h32mx";
+					clocks = <&mck>;
+				};
+
+				usb: usbck {
+					compatible = "atmel,at91sam9x5-clk-usb";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				prog: progck {
+					compatible = "atmel,at91sam9x5-clk-programmable";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					interrupt-parent = <&pmc>;
+					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
+
+					prog0: prog0 {
+						#clock-cells = <0>;
+						reg = <0>;
+						interrupts = <AT91_PMC_PCKRDY(0)>;
+					};
+
+					prog1: prog1 {
+						#clock-cells = <0>;
+						reg = <1>;
+						interrupts = <AT91_PMC_PCKRDY(1)>;
+					};
+
+					prog2: prog2 {
+						#clock-cells = <0>;
+						reg = <2>;
+						interrupts = <AT91_PMC_PCKRDY(2)>;
+					};
+				};
+
+				smd: smdclk {
+					compatible = "atmel,at91sam9x5-clk-smd";
+					#clock-cells = <0>;
+					clocks = <&plladiv>, <&utmi>;
+				};
+
+				systemck {
+					compatible = "atmel,at91rm9200-clk-system";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ddrck: ddrck {
+						#clock-cells = <0>;
+						reg = <2>;
+						clocks = <&mck>;
+					};
+
+					lcdck: lcdck {
+						#clock-cells = <0>;
+						reg = <4>;
+						clocks = <&smd>;
+					};
+
+					smdck: smdck {
+						#clock-cells = <0>;
+						reg = <4>;
+						clocks = <&smd>;
+					};
+
+					uhpck: uhpck {
+						#clock-cells = <0>;
+						reg = <6>;
+						clocks = <&usb>;
+					};
+
+					udpck: udpck {
+						#clock-cells = <0>;
+						reg = <7>;
+						clocks = <&usb>;
+					};
+
+					pck0: pck0 {
+						#clock-cells = <0>;
+						reg = <8>;
+						clocks = <&prog0>;
+					};
+
+					pck1: pck1 {
+						#clock-cells = <0>;
+						reg = <9>;
+						clocks = <&prog1>;
+					};
+
+					pck2: pck2 {
+						#clock-cells = <0>;
+						reg = <10>;
+						clocks = <&prog2>;
+					};
+				};
+
+				periph32ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&h32ck>;
+
+					pioD_clk: pioD_clk {
+						#clock-cells = <0>;
+						reg = <5>;
+					};
+
+					usart0_clk: usart0_clk {
+						#clock-cells = <0>;
+						reg = <6>;
+					};
+
+					usart1_clk: usart1_clk {
+						#clock-cells = <0>;
+						reg = <7>;
+					};
+
+					icm_clk: icm_clk {
+						#clock-cells = <0>;
+						reg = <9>;
+					};
+
+					aes_clk: aes_clk {
+						#clock-cells = <0>;
+						reg = <12>;
+					};
+
+					tdes_clk: tdes_clk {
+						#clock-cells = <0>;
+						reg = <14>;
+					};
+
+					sha_clk: sha_clk {
+						#clock-cells = <0>;
+						reg = <15>;
+					};
+
+					matrix1_clk: matrix1_clk {
+						#clock-cells = <0>;
+						reg = <17>;
+					};
+
+					hsmc_clk: hsmc_clk {
+						#clock-cells = <0>;
+						reg = <22>;
+					};
+
+					pioA_clk: pioA_clk {
+						#clock-cells = <0>;
+						reg = <23>;
+					};
+
+					pioB_clk: pioB_clk {
+						#clock-cells = <0>;
+						reg = <24>;
+					};
+
+					pioC_clk: pioC_clk {
+						#clock-cells = <0>;
+						reg = <25>;
+					};
+
+					pioE_clk: pioE_clk {
+						#clock-cells = <0>;
+						reg = <26>;
+					};
+
+					uart0_clk: uart0_clk {
+						#clock-cells = <0>;
+						reg = <27>;
+					};
+
+					uart1_clk: uart1_clk {
+						#clock-cells = <0>;
+						reg = <28>;
+					};
+
+					usart2_clk: usart2_clk {
+						#clock-cells = <0>;
+						reg = <29>;
+					};
+
+					usart3_clk: usart3_clk {
+						#clock-cells = <0>;
+						reg = <30>;
+					};
+
+					usart4_clk: usart4_clk {
+						#clock-cells = <0>;
+						reg = <31>;
+					};
+
+					twi0_clk: twi0_clk {
+						reg = <32>;
+						#clock-cells = <0>;
+					};
+
+					twi1_clk: twi1_clk {
+						#clock-cells = <0>;
+						reg = <33>;
+					};
+
+					twi2_clk: twi2_clk {
+						#clock-cells = <0>;
+						reg = <34>;
+					};
+
+					mci0_clk: mci0_clk {
+						#clock-cells = <0>;
+						reg = <35>;
+					};
+
+					mci1_clk: mci1_clk {
+						#clock-cells = <0>;
+						reg = <36>;
+					};
+
+					spi0_clk: spi0_clk {
+						#clock-cells = <0>;
+						reg = <37>;
+					};
+
+					spi1_clk: spi1_clk {
+						#clock-cells = <0>;
+						reg = <38>;
+					};
+
+					spi2_clk: spi2_clk {
+						#clock-cells = <0>;
+						reg = <39>;
+					};
+
+					tcb0_clk: tcb0_clk {
+						#clock-cells = <0>;
+						reg = <40>;
+					};
+
+					tcb1_clk: tcb1_clk {
+						#clock-cells = <0>;
+						reg = <41>;
+					};
+
+					tcb2_clk: tcb2_clk {
+						#clock-cells = <0>;
+						reg = <42>;
+					};
+
+					pwm_clk: pwm_clk {
+						#clock-cells = <0>;
+						reg = <43>;
+					};
+
+					adc_clk: adc_clk {
+						#clock-cells = <0>;
+						reg = <44>;
+					};
+
+					dbgu_clk: dbgu_clk {
+						#clock-cells = <0>;
+						reg = <45>;
+					};
+
+					uhphs_clk: uhphs_clk {
+						#clock-cells = <0>;
+						reg = <46>;
+					};
+
+					udphs_clk: udphs_clk {
+						#clock-cells = <0>;
+						reg = <47>;
+					};
+
+					ssc0_clk: ssc0_clk {
+						#clock-cells = <0>;
+						reg = <48>;
+					};
+
+					ssc1_clk: ssc1_clk {
+						#clock-cells = <0>;
+						reg = <49>;
+					};
+
+					trng_clk: trng_clk {
+						#clock-cells = <0>;
+						reg = <53>;
+					};
+
+					macb0_clk: macb0_clk {
+						#clock-cells = <0>;
+						reg = <54>;
+					};
+
+					macb1_clk: macb1_clk {
+						#clock-cells = <0>;
+						reg = <55>;
+					};
+
+					fuse_clk: fuse_clk {
+						#clock-cells = <0>;
+						reg = <57>;
+					};
+
+					securam_clk: securam_clk {
+						#clock-cells = <0>;
+						reg = <59>;
+					};
+
+					smd_clk: smd_clk {
+						#clock-cells = <0>;
+						reg = <61>;
+					};
+
+					twi3_clk: twi3_clk {
+						#clock-cells = <0>;
+						reg = <62>;
+					};
+
+					catb_clk: catb_clk {
+						#clock-cells = <0>;
+						reg = <63>;
+					};
+				};
+
+				periph64ck {
+					compatible = "atmel,at91sam9x5-clk-peripheral";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&mck>;
+
+					dma0_clk: dma0_clk {
+						#clock-cells = <0>;
+						reg = <8>;
+					};
+
+					cpkcc_clk: cpkcc_clk {
+						#clock-cells = <0>;
+						reg = <10>;
+					};
+
+					aesb_clk: aesb_clk {
+						#clock-cells = <0>;
+						reg = <13>;
+					};
+
+					mpddr_clk: mpddr_clk {
+						#clock-cells = <0>;
+						reg = <16>;
+					};
+
+					matrix0_clk: matrix0_clk {
+						#clock-cells = <0>;
+						reg = <18>;
+					};
+
+					vdec_clk: vdec_clk {
+						#clock-cells = <0>;
+						reg = <19>;
+					};
+
+					dma1_clk: dma1_clk {
+						#clock-cells = <0>;
+						reg = <50>;
+					};
+
+					lcd_clk: lcd_clk {
+						#clock-cells = <0>;
+						reg = <51>;
+					};
+
+					isi_clk: isi_clk {
+						#clock-cells = <0>;
+						reg = <52>;
+					};
+				};
+			};
+
+			mmc0: mmc@f8000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xf8000000 0x600>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(0))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci0_clk>;
+				clock-names = "mci_clk";
+			};
+
+			spi0: spi@f8010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8010000 0x100>;
+				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(10))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(11))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0>;
+				clocks = <&spi0_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8014000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8014000 0x4000>;
+				interrupts = <32 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(2))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi0_clk>;
+				status = "disabled";
+			};
+
+			tcb0: timer@f801c000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf801c000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb0_clk>;
+				clock-names = "t0_clk";
+			};
+
+			macb0: ethernet@f8020000 {
+				compatible = "atmel,sama5d4-gem";
+				reg = <0xf8020000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 3>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii>;
+				clocks = <&macb0_clk>, <&macb0_clk>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			i2c2: i2c@f8024000 {
+				compatible = "atmel,at91sam9x5-i2c";
+				reg = <0xf8024000 0x4000>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 6>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(6))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&twi2_clk>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8028000 {
+				compatible = "atmel,sama5d4-sfr", "syscon";
+				reg = <0xf8028000 0x60>;
+			};
+
+			mmc1: mmc@fc000000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfc000000 0x600>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "rxtx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&mci1_clk>;
+				clock-names = "mci_clk";
+			};
+
+			usart2: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(16))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(17))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts &pinctrl_usart2_cts>;
+				clocks = <&usart2_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart3: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(18))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(19))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart3>;
+				clocks = <&usart3_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart4: serial@fc010000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc010000 0x100>;
+				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(20))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(21))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart4>;
+				clocks = <&usart4_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			tcb1: timer@fc020000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xfc020000 0x100>;
+				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&tcb1_clk>;
+				clock-names = "t0_clk";
+			};
+
+			adc0: adc@fc034000 {
+				compatible = "atmel,at91sam9x5-adc";
+				reg = <0xfc034000 0x100>;
+				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger is conflict with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				clocks = <&adc_clk>,
+					 <&adc_op_clk>;
+				clock-names = "adc_clk", "adc_op_clk";
+				atmel,adc-channels-used = <0x01f>;
+				atmel,adc-startup-time = <40>;
+				atmel,adc-use-external;
+				atmel,adc-vref = <3000>;
+				atmel,adc-res = <8 10>;
+				atmel,adc-sample-hold-time = <11>;
+				atmel,adc-res-names = "lowres", "highres";
+				atmel,adc-ts-pressure-threshold = <10000>;
+				status = "disabled";
+
+				trigger@0 {
+					trigger-name = "external-rising";
+					trigger-value = <0x1>;
+					trigger-external;
+				};
+				trigger@1 {
+					trigger-name = "external-falling";
+					trigger-value = <0x2>;
+					trigger-external;
+				};
+				trigger@2 {
+					trigger-name = "external-any";
+					trigger-value = <0x3>;
+					trigger-external;
+				};
+				trigger@3 {
+					trigger-name = "continuous";
+					trigger-value = <0x6>;
+				};
+			};
+
+			rstc@fc068600 {
+				compatible = "atmel,at91sam9g45-rstc";
+				reg = <0xfc068600 0x10>;
+			};
+
+			shdwc@fc068610 {
+				compatible = "atmel,at91sam9x5-shdwc";
+				reg = <0xfc068610 0x10>;
+			};
+
+			pit: timer@fc068630 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfc068630 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&h32ck>;
+			};
+
+			watchdog@fc068640 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfc068640 0x10>;
+				status = "disabled";
+			};
+
+			sckc@fc068650 {
+				compatible = "atmel,at91sam9x5-sckc";
+				reg = <0xfc068650 0x4>;
+
+				slow_rc_osc: slow_rc_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+					#clock-cells = <0>;
+					clock-frequency = <32768>;
+					clock-accuracy = <250000000>;
+					atmel,startup-time-usec = <75>;
+				};
+
+				slow_osc: slow_osc {
+					compatible = "atmel,at91sam9x5-clk-slow-osc";
+					#clock-cells = <0>;
+					clocks = <&slow_xtal>;
+					atmel,startup-time-usec = <1200000>;
+				};
+
+				clk32k: slowck {
+					compatible = "atmel,at91sam9x5-clk-slow";
+					#clock-cells = <0>;
+					clocks = <&slow_rc_osc &slow_osc>;
+				};
+			};
+
+			rtc@fc0686b0 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfc0686b0 0x30>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+			};
+
+			dbgu: serial@fc069000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc069000 0x200>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
+				clocks = <&dbgu_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+
+			pinctrl@fc06a000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+				ranges = <0xfc06a000 0xfc06a000 0x4000>;
+				/* WARNING: revisit as pin spec has changed */
+				atmel,mux-mask = <
+					/*   A          B          C  */
+					0xffffffff 0x3ffcfe7c 0x1c010101	/* pioA */
+					0x7fffffff 0xfffccc3a 0x3f00cc3a	/* pioB */
+					0xffffffff 0x3ff83fff 0xff00ffff	/* pioC */
+					0x00000000 0x00000000 0x00000000	/* pioD */
+					0xffffffff 0x7fffffff 0x76fff1bf	/* pioE */
+					>;
+
+				pioA: gpio@fc06a000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06a000 0x100>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioA_clk>;
+				};
+
+				pioB: gpio@fc06b000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06b000 0x100>;
+					interrupts = <24 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioB_clk>;
+				};
+
+				pioC: gpio@fc06c000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06c000 0x100>;
+					interrupts = <25 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioC_clk>;
+				};
+
+				pioD: gpio@fc068000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc068000 0x100>;
+					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioD_clk>;
+					status = "disabled";
+				};
+
+				pioE: gpio@fc06d000 {
+					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+					reg = <0xfc06d000 0x100>;
+					interrupts = <26 IRQ_TYPE_LEVEL_HIGH 1>;
+					#gpio-cells = <2>;
+					gpio-controller;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					clocks = <&pioE_clk>;
+				};
+
+				/* pinctrl pin settings */
+				adc0 {
+					pinctrl_adc0_adtrg: adc0_adtrg {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with USBA_VBUS */
+					};
+					pinctrl_adc0_ad0: adc0_ad0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad1: adc0_ad1 {
+						atmel,pins =
+							<AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad2: adc0_ad2 {
+						atmel,pins =
+							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad3: adc0_ad3 {
+						atmel,pins =
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_adc0_ad4: adc0_ad4 {
+						atmel,pins =
+							<AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,     /* conflicts with D14 and TDI */
+							<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;  /* conflicts with D15 and TDO */
+					};
+				};
+
+				i2c0 {
+					pinctrl_i2c0: i2c0-0 {
+						atmel,pins =
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				i2c2 {
+					pinctrl_i2c2: i2c2-0 {
+						atmel,pins =
+							<AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* TWD2, conflicts with RD0 and PWML1 */
+							 AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */
+					};
+				};
+
+				macb0 {
+					pinctrl_macb0_rmii: macb0_rmii-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX0 */
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TX1 */
+							 AT91_PIOB  8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX0 */
+							 AT91_PIOB  9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RX1 */
+							 AT91_PIOB  6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXDV */
+							 AT91_PIOB  7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_RXER */
+							 AT91_PIOB  2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXEN */
+							 AT91_PIOB  0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_TXCK */
+							 AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDC */
+							 AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* G0_MDIO */
+							>;
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOC 4 AT91_PERIPH_B AT91_PINCTRL_NONE	/* MCI0_CK, conflict with PCK1(ISI_MCK) */
+							 AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_CDB, conflict with NAND_D0 */
+							 AT91_PIOC 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB0, conflict with NAND_D1 */
+							>;
+					};
+					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
+						atmel,pins =
+							<AT91_PIOC 7 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB1, conflict with NAND_D2 */
+							 AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB2, conflict with NAND_D3 */
+							 AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* MCI0_DB3, conflict with NAND_D4 */
+							>;
+					};
+				};
+
+				mmc1 {
+					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
+						atmel,pins =
+							<AT91_PIOE 18 AT91_PERIPH_C AT91_PINCTRL_NONE		/* MCI1_CK */
+							 AT91_PIOE 19 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_CDA */
+							 AT91_PIOE 20 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA0 */
+							>;
+					};
+					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
+						atmel,pins =
+							<AT91_PIOE 21 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA1 */
+							 AT91_PIOE 22 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA2 */
+							 AT91_PIOE 23 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* MCI1_DA3 */
+							>;
+					};
+				};
+
+				nand0 {
+					pinctrl_nand: nand-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC13 periph A Read Enable */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC14 periph A Write Enable */
+
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC17 ALE */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC18 CLE */
+
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC15 NCS3/Chip Enable */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PC16 NANDRDY */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC5 Data bit 0 */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC6 Data bit 1 */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC7 Data bit 2 */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC8 Data bit 3 */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC9 Data bit 4 */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC10 Data bit 5 */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC11 periph A Data bit 6 */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC12 periph A Data bit 7 */
+					};
+				};
+
+				spi0 {
+					pinctrl_spi0: spi0-0 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MISO */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_MOSI */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI0_SPCK */
+							>;
+					};
+				};
+
+				usart2 {
+					pinctrl_usart2: usart2-0 {
+						atmel,pins =
+							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD - conflicts with G0_CRS, ISI_HSYNC */
+							 AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP		/* TXD - conflicts with G0_COL, PCK2 */
+							>;
+					};
+					pinctrl_usart2_rts: usart2_rts-0 {
+						atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_RX3, PWMH1 */
+					};
+					pinctrl_usart2_cts: usart2_cts-0 {
+						atmel,pins = <AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with G0_TXER, ISI_VSYNC */
+					};
+				};
+
+				usart3 {
+					pinctrl_usart3: usart3-0 {
+						atmel,pins =
+							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+				};
+
+				usart4 {
+					pinctrl_usart4: usart4-0 {
+						atmel,pins =
+							<AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOE 27 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+					pinctrl_usart4_rts: usart4_rts-0 {
+						atmel,pins = <AT91_PIOE 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with NWAIT, A19 */
+					};
+					pinctrl_usart4_cts: usart4_cts-0 {
+						atmel,pins = <AT91_PIOE 0 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with A0/NBS0, MCI0_CDB */
+					};
+				};
+			};
+
+			aic: interrupt-controller@fc06e000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d4-aic";
+				interrupt-controller;
+				reg = <0xfc06e000 0x200>;
+				atmel,external-irqs = <56>;
+			};
+		};
+	};
+};
diff --git a/src/arm/samsung_k3pe0e000b.dtsi b/src/arm/samsung_k3pe0e000b.dtsi
new file mode 100644
index 000000000000..9657a5cbc3ad
--- /dev/null
+++ b/src/arm/samsung_k3pe0e000b.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Timings and Geometry for Samsung K3PE0E000B memory part
+ */
+
+/ {
+	samsung_K3PE0E000B: lpddr2 {
+		compatible	= "Samsung,K3PE0E000B","jedec,lpddr2-s4";
+		density		= <4096>;
+		io-width	= <32>;
+
+		tRPab-min-tck	= <3>;
+		tRCD-min-tck	= <3>;
+		tWR-min-tck	= <3>;
+		tRASmin-min-tck	= <3>;
+		tRRD-min-tck	= <2>;
+		tWTR-min-tck	= <2>;
+		tXP-min-tck	= <2>;
+		tRTP-min-tck	= <2>;
+		tCKE-min-tck	= <3>;
+		tCKESR-min-tck	= <3>;
+		tFAW-min-tck	= <8>;
+
+		timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <533333333>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+
+		timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <266666666>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+	};
+};
diff --git a/src/arm/sh7372-mackerel.dts b/src/arm/sh7372-mackerel.dts
new file mode 100644
index 000000000000..a759a276c9a9
--- /dev/null
+++ b/src/arm/sh7372-mackerel.dts
@@ -0,0 +1,26 @@
+/*
+ * Device Tree Source for the mackerel board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "sh7372.dtsi"
+
+/ {
+	model = "Mackerel (AP4 EVM 2nd)";
+	compatible = "renesas,mackerel";
+
+	chosen {
+		bootargs = "console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp mem=240m rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;
+	};
+};
diff --git a/src/arm/sh7372.dtsi b/src/arm/sh7372.dtsi
new file mode 100644
index 000000000000..f863a10cb1b2
--- /dev/null
+++ b/src/arm/sh7372.dtsi
@@ -0,0 +1,35 @@
+/*
+ * Device Tree Source for the sh7372 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "renesas,sh7372";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0x0>;
+			clock-frequency = <800000000>;
+		};
+	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-sh7372";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605801c 0x1c>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/src/arm/sh73a0-kzm9g-reference.dts b/src/arm/sh73a0-kzm9g-reference.dts
new file mode 100644
index 000000000000..6d32c87632d4
--- /dev/null
+++ b/src/arm/sh73a0-kzm9g-reference.dts
@@ -0,0 +1,366 @@
+/*
+ * Device Tree Source for the KZM-A9-GT board
+ *
+ * Copyright (C) 2012 Horms Solutions Ltd.
+ *
+ * Based on sh73a0-kzm9g.dts
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "KZM-A9-GT";
+	compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
+
+	aliases {
+		serial4 = &scifa4;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd_dvfs>;
+			operating-points = <
+				/* kHz  uV */
+				1196000 1315000
+				 598000 1175000
+				 398667 1065000
+			>;
+			voltage-tolerance = <1>; /* 1% */
+		};
+	};
+
+	chosen {
+		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
+		stdout-path = &scifa4;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x41000000 0x1e800000>;
+	};
+
+	reg_1p8v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vmmc_sdhi0: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vmmc_sdhi2: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lan9220@10000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x10000000 0x100>;
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin0>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		reg-io-width = <4>;
+		smsc,irq-push-pull;
+		smsc,save-mac-address;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+			label = "LED1";
+		};
+		led2 {
+			gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+			label = "LED2";
+		};
+		led3 {
+			gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+			label = "LED3";
+		};
+		led4 {
+			gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+			label = "LED4";
+		};
+	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		back-key {
+			gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "SW3";
+		};
+
+		right-key {
+			gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RIGHT>;
+			label = "SW2-R";
+		};
+
+		left-key {
+			gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_LEFT>;
+			label = "SW2-L";
+		};
+
+		enter-key {
+			gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			label = "SW2-P";
+		};
+
+		up-key {
+			gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_UP>;
+			label = "SW2-U";
+		};
+
+		down-key {
+			gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DOWN>;
+			label = "SW2-D";
+		};
+
+		home-key {
+			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "SW1";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "left_j";
+		simple-audio-card,cpu {
+			sound-dai = <&sh_fsi2 0>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&ak4648>;
+			bitclock-master;
+			frame-master;
+			system-clock-frequency = <11289600>;
+		};
+	};
+};
+
+&cmt1 {
+	status = "okay";
+};
+
+&extal2_clk {
+	clock-frequency = <48000000>;
+};
+
+&i2c0 {
+	status = "okay";
+	as3711@40 {
+		compatible = "ams,as3711";
+		reg = <0x40>;
+
+		regulators {
+			vdd_dvfs: sd1 {
+				regulator-name = "1.315V CPU";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			sd2 {
+				regulator-name = "1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			sd4 {
+				regulator-name = "1.215V";
+				regulator-min-microvolt = <1215000>;
+				regulator-max-microvolt = <1235000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo2 {
+				regulator-name = "2.8V CPU";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo3 {
+				regulator-name = "3.0V CPU";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo4 {
+				regulator-name = "2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo5 {
+				regulator-name = "2.8V #2";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo7 {
+				regulator-name = "1.15V CPU";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+			ldo8 {
+				regulator-name = "1.15V CPU #2";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	ak4648: ak4648@12 {
+		#sound-dai-cells = <0>;
+		compatible = "asahi-kasei,ak4648";
+		reg = <0x12>;
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcf8575: gpio@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		interrupt-parent = <&irqpin2>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&mmcif {
+	pinctrl-0 = <&mmcif_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	vmmc-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&pfc {
+	i2c3_pins: i2c3 {
+		renesas,groups = "i2c3_1";
+		renesas,function = "i2c3";
+	};
+
+	mmcif_pins: mmc {
+		mux {
+			renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+			renesas,function = "mmc0";
+		};
+		cfg {
+			renesas,groups = "mmc0_data8_0";
+			renesas,pins = "PORT279";
+			bias-pull-up;
+		};
+	};
+
+	scifa4_pins: serial4 {
+		renesas,groups = "scifa4_data", "scifa4_ctrl";
+		renesas,function = "scifa4";
+	};
+
+	sdhi0_pins: sd0 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+		renesas,function = "sdhi0";
+	};
+
+	sdhi2_pins: sd2 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+	};
+
+	fsia_pins: sounda {
+		renesas,groups = "fsia_mclk_in", "fsia_sclk_in",
+				 "fsia_data_in", "fsia_data_out";
+		renesas,function = "fsia";
+	};
+};
+
+&scifa4 {
+	pinctrl-0 = <&scifa4_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&vmmc_sdhi2>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&sh_fsi2 {
+	pinctrl-0 = <&fsia_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/src/arm/sh73a0-kzm9g.dts b/src/arm/sh73a0-kzm9g.dts
new file mode 100644
index 000000000000..27c5f426d172
--- /dev/null
+++ b/src/arm/sh73a0-kzm9g.dts
@@ -0,0 +1,26 @@
+/*
+ * Device Tree Source for the KZM-A9-GT board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "sh73a0.dtsi"
+
+/ {
+	model = "KZM-A9-GT";
+	compatible = "renesas,kzm9g", "renesas,sh73a0";
+
+	chosen {
+		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x41000000 0x1e800000>;
+	};
+};
diff --git a/src/arm/sh73a0.dtsi b/src/arm/sh73a0.dtsi
new file mode 100644
index 000000000000..2dfd5b44255d
--- /dev/null
+++ b/src/arm/sh73a0.dtsi
@@ -0,0 +1,699 @@
+/*
+ * Device Tree Source for the SH73A0 SoC
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/sh73a0-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "renesas,sh73a0";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			clock-frequency = <1196000000>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			clock-frequency = <1196000000>;
+		};
+	};
+
+	gic: interrupt-controller@f0001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xf0001000 0x1000>,
+		      <0xf0000100 0x100>;
+	};
+
+	sbsc2: memory-controller@fb400000 {
+		compatible = "renesas,sbsc-sh73a0";
+		reg = <0xfb400000 0x400>;
+		interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sec", "temp";
+	};
+
+	sbsc1: memory-controller@fe400000 {
+		compatible = "renesas,sbsc-sh73a0";
+		reg = <0xfe400000 0x400>;
+		interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sec", "temp";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 56 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cmt1: timer@e6138000 {
+		compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48";
+		reg = <0xe6138000 0x200>;
+		interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+
+		renesas,channels-mask = <0x3f>;
+
+		clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
+		clock-names = "fck";
+		status = "disabled";
+	};
+
+	irqpin0: irqpin@e6900000 {
+		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900000 4>,
+			<0xe6900010 4>,
+			<0xe6900020 1>,
+			<0xe6900040 1>,
+			<0xe6900060 1>;
+		interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH
+			      0 2 IRQ_TYPE_LEVEL_HIGH
+			      0 3 IRQ_TYPE_LEVEL_HIGH
+			      0 4 IRQ_TYPE_LEVEL_HIGH
+			      0 5 IRQ_TYPE_LEVEL_HIGH
+			      0 6 IRQ_TYPE_LEVEL_HIGH
+			      0 7 IRQ_TYPE_LEVEL_HIGH
+			      0 8 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	irqpin1: irqpin@e6900004 {
+		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900004 4>,
+			<0xe6900014 4>,
+			<0xe6900024 1>,
+			<0xe6900044 1>,
+			<0xe6900064 1>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH
+			      0 10 IRQ_TYPE_LEVEL_HIGH
+			      0 11 IRQ_TYPE_LEVEL_HIGH
+			      0 12 IRQ_TYPE_LEVEL_HIGH
+			      0 13 IRQ_TYPE_LEVEL_HIGH
+			      0 14 IRQ_TYPE_LEVEL_HIGH
+			      0 15 IRQ_TYPE_LEVEL_HIGH
+			      0 16 IRQ_TYPE_LEVEL_HIGH>;
+		control-parent;
+	};
+
+	irqpin2: irqpin@e6900008 {
+		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe6900008 4>,
+			<0xe6900018 4>,
+			<0xe6900028 1>,
+			<0xe6900048 1>,
+			<0xe6900068 1>;
+		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH
+			      0 18 IRQ_TYPE_LEVEL_HIGH
+			      0 19 IRQ_TYPE_LEVEL_HIGH
+			      0 20 IRQ_TYPE_LEVEL_HIGH
+			      0 21 IRQ_TYPE_LEVEL_HIGH
+			      0 22 IRQ_TYPE_LEVEL_HIGH
+			      0 23 IRQ_TYPE_LEVEL_HIGH
+			      0 24 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	irqpin3: irqpin@e690000c {
+		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		reg = <0xe690000c 4>,
+			<0xe690001c 4>,
+			<0xe690002c 1>,
+			<0xe690004c 1>,
+			<0xe690006c 1>;
+		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH
+			      0 26 IRQ_TYPE_LEVEL_HIGH
+			      0 27 IRQ_TYPE_LEVEL_HIGH
+			      0 28 IRQ_TYPE_LEVEL_HIGH
+			      0 29 IRQ_TYPE_LEVEL_HIGH
+			      0 30 IRQ_TYPE_LEVEL_HIGH
+			      0 31 IRQ_TYPE_LEVEL_HIGH
+			      0 32 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	i2c0: i2c@e6820000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
+		reg = <0xe6820000 0x425>;
+		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
+			      0 168 IRQ_TYPE_LEVEL_HIGH
+			      0 169 IRQ_TYPE_LEVEL_HIGH
+			      0 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@e6822000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
+		reg = <0xe6822000 0x425>;
+		interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
+			      0 52 IRQ_TYPE_LEVEL_HIGH
+			      0 53 IRQ_TYPE_LEVEL_HIGH
+			      0 54 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@e6824000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
+		reg = <0xe6824000 0x425>;
+		interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
+			      0 172 IRQ_TYPE_LEVEL_HIGH
+			      0 173 IRQ_TYPE_LEVEL_HIGH
+			      0 174 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@e6826000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
+		reg = <0xe6826000 0x425>;
+		interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
+			      0 184 IRQ_TYPE_LEVEL_HIGH
+			      0 185 IRQ_TYPE_LEVEL_HIGH
+			      0 186 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@e6828000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
+		reg = <0xe6828000 0x425>;
+		interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
+			      0 188 IRQ_TYPE_LEVEL_HIGH
+			      0 189 IRQ_TYPE_LEVEL_HIGH
+			      0 190 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
+		status = "disabled";
+	};
+
+	mmcif: mmc@e6bd0000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0xe6bd0000 0x100>;
+		interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
+			      0 141 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	sdhi0: sd@ee100000 {
+		compatible = "renesas,sdhi-sh73a0";
+		reg = <0xee100000 0x100>;
+		interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
+			      0 84 IRQ_TYPE_LEVEL_HIGH
+			      0 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
+	sdhi1: sd@ee120000 {
+		compatible = "renesas,sdhi-sh73a0";
+		reg = <0xee120000 0x100>;
+		interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
+			      0 89 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
+		toshiba,mmc-wrprotect-disable;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sd@ee140000 {
+		compatible = "renesas,sdhi-sh73a0";
+		reg = <0xee140000 0x100>;
+		interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
+			      0 105 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
+		toshiba,mmc-wrprotect-disable;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6c40000 0x100>;
+		interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6c50000 0x100>;
+		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6c60000 0x100>;
+		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa3: serial@e6c70000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6c70000 0x100>;
+		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa4: serial@e6c80000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6c80000 0x100>;
+		interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa5: serial@e6cb0000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6cb0000 0x100>;
+		interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa6: serial@e6cc0000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6cc0000 0x100>;
+		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa7: serial@e6cd0000 {
+		compatible = "renesas,scifa-sh73a0", "renesas,scifa";
+		reg = <0xe6cd0000 0x100>;
+		interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb8: serial@e6c30000 {
+		compatible = "renesas,scifb-sh73a0", "renesas,scifb";
+		reg = <0xe6c30000 0x100>;
+		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks SH73A0_CLK_SCIFB>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	pfc: pfc@e6050000 {
+		compatible = "renesas,pfc-sh73a0";
+		reg = <0xe6050000 0x8000>,
+		      <0xe605801c 0x1c>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupts-extended =
+			<&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+			<&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+			<&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+			<&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+			<&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+			<&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+			<&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+			<&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+	};
+
+	sh_fsi2: sound@ec230000 {
+		#sound-dai-cells = <1>;
+		compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2";
+		reg = <0xec230000 0x400>;
+		interrupts = <0 146 0x4>;
+		status = "disabled";
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* External root clocks */
+		extalr_clk: extalr_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "extalr";
+		};
+		extal1_clk: extal1_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+			clock-output-names = "extal1";
+		};
+		extal2_clk: extal2_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "extal2";
+		};
+		extcki_clk: extcki_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "extcki";
+		};
+		fsiack_clk: fsiack_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "fsiack";
+		};
+		fsibck_clk: fsibck_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+			clock-output-names = "fsibck";
+		};
+
+		/* Special CPG clocks */
+		cpg_clocks: cpg_clocks@e6150000 {
+			compatible = "renesas,sh73a0-cpg-clocks";
+			reg = <0xe6150000 0x10000>;
+			clocks = <&extal1_clk>, <&extal2_clk>;
+			#clock-cells = <1>;
+			clock-output-names = "main", "pll0", "pll1", "pll2",
+					     "pll3", "dsi0phy", "dsi1phy",
+					     "zg", "m3", "b", "m1", "m2",
+					     "z", "zx", "hp";
+		};
+
+		/* Variable factor clocks (DIV6) */
+		vclk1_clk: vclk1_clk@e6150008 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150008 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "vclk1";
+		};
+		vclk2_clk: vclk2_clk@e615000c {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615000c 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "vclk2";
+		};
+		vclk3_clk: vclk3_clk@e615001c {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615001c 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "vclk3";
+		};
+		zb_clk: zb_clk@e6150010 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150010 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "zb";
+		};
+		flctl_clk: flctl_clk@e6150014 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150014 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "flctlck";
+		};
+		sdhi0_clk: sdhi0_clk@e6150074 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150074 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sdhi0ck";
+		};
+		sdhi1_clk: sdhi1_clk@e6150078 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150078 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sdhi1ck";
+		};
+		sdhi2_clk: sdhi2_clk@e615007c {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615007c 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sdhi2ck";
+		};
+		fsia_clk: fsia_clk@e6150018 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150018 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "fsia";
+		};
+		fsib_clk: fsib_clk@e6150090 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150090 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "fsib";
+		};
+		sub_clk: sub_clk@e6150080 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150080 4>;
+			clocks = <&extal2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "sub";
+		};
+		spua_clk: spua_clk@e6150084 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150084 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "spua";
+		};
+		spuv_clk: spuv_clk@e6150094 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150094 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "spuv";
+		};
+		msu_clk: msu_clk@e6150088 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150088 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "msu";
+		};
+		hsi_clk: hsi_clk@e615008c {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615008c 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "hsi";
+		};
+		mfg1_clk: mfg1_clk@e6150098 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150098 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "mfg1";
+		};
+		mfg2_clk: mfg2_clk@e615009c {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe615009c 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "mfg2";
+		};
+		dsit_clk: dsit_clk@e6150060 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150060 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "dsit";
+		};
+		dsi0p_clk: dsi0p_clk@e6150064 {
+			compatible = "renesas,sh73a0-div6-clock", "renesas,cpg-div6-clock";
+			reg = <0xe6150064 4>;
+			clocks = <&pll1_div2_clk>;
+			#clock-cells = <0>;
+			clock-output-names = "dsi0pck";
+		};
+
+		/* Fixed factor clocks */
+		main_div2_clk: main_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks SH73A0_CLK_MAIN>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "main_div2";
+		};
+		pll1_div2_clk: pll1_div2_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <2>;
+			clock-mult = <1>;
+			clock-output-names = "pll1_div2";
+		};
+		pll1_div7_clk: pll1_div7_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <7>;
+			clock-mult = <1>;
+			clock-output-names = "pll1_div7";
+		};
+		pll1_div13_clk: pll1_div13_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks SH73A0_CLK_PLL1>;
+			#clock-cells = <0>;
+			clock-div = <13>;
+			clock-mult = <1>;
+			clock-output-names = "pll1_div13";
+		};
+		twd_clk: twd_clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks SH73A0_CLK_Z>;
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clock-output-names = "twd";
+		};
+
+		/* Gate clocks */
+		mstp0_clks: mstp0_clks@e6150130 {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150130 4>, <0xe6150030 4>;
+			clocks = <&cpg_clocks SH73A0_CLK_HP>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_IIC2
+			>;
+			clock-output-names =
+				"iic2";
+		};
+		mstp1_clks: mstp1_clks@e6150134 {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150134 4>, <0xe6150038 4>;
+			clocks = <&cpg_clocks SH73A0_CLK_B>,
+				 <&cpg_clocks SH73A0_CLK_B>,
+				 <&cpg_clocks SH73A0_CLK_B>,
+				 <&cpg_clocks SH73A0_CLK_B>,
+				 <&sub_clk>, <&cpg_clocks SH73A0_CLK_B>,
+				 <&cpg_clocks SH73A0_CLK_HP>,
+				 <&cpg_clocks SH73A0_CLK_ZG>,
+				 <&cpg_clocks SH73A0_CLK_B>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_CEU1 SH73A0_CLK_CSI2_RX1
+				SH73A0_CLK_CEU0 SH73A0_CLK_CSI2_RX0
+				SH73A0_CLK_TMU0	SH73A0_CLK_DSITX0
+				SH73A0_CLK_IIC0 SH73A0_CLK_SGX
+				SH73A0_CLK_LCDC0
+			>;
+			clock-output-names =
+				"ceu1", "csi2_rx1", "ceu0", "csi2_rx0",
+				"tmu0", "dsitx0", "iic0", "sgx", "lcdc0";
+		};
+		mstp2_clks: mstp2_clks@e6150138 {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150138 4>, <0xe6150040 4>;
+			clocks = <&sub_clk>, <&cpg_clocks SH73A0_CLK_HP>,
+				 <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>, <&sub_clk>, <&sub_clk>,
+				 <&sub_clk>, <&sub_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_SCIFA7 SH73A0_CLK_SY_DMAC
+				SH73A0_CLK_MP_DMAC SH73A0_CLK_SCIFA5
+				SH73A0_CLK_SCIFB SH73A0_CLK_SCIFA0
+				SH73A0_CLK_SCIFA1 SH73A0_CLK_SCIFA2
+				SH73A0_CLK_SCIFA3 SH73A0_CLK_SCIFA4
+			>;
+			clock-output-names =
+				"scifa7", "sy_dmac", "mp_dmac", "scifa5",
+				"scifb", "scifa0", "scifa1", "scifa2",
+				"scifa3", "scifa4";
+		};
+		mstp3_clks: mstp3_clks@e615013c {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe615013c 4>, <0xe6150048 4>;
+			clocks = <&sub_clk>, <&extalr_clk>,
+				 <&cpg_clocks SH73A0_CLK_HP>, <&sub_clk>,
+				 <&cpg_clocks SH73A0_CLK_HP>,
+				 <&cpg_clocks SH73A0_CLK_HP>, <&flctl_clk>,
+				 <&sdhi0_clk>, <&sdhi1_clk>,
+				 <&cpg_clocks SH73A0_CLK_HP>, <&sdhi2_clk>,
+				 <&main_div2_clk>, <&main_div2_clk>,
+				 <&main_div2_clk>, <&main_div2_clk>,
+				 <&main_div2_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_SCIFA6 SH73A0_CLK_CMT1
+				SH73A0_CLK_FSI SH73A0_CLK_IRDA
+				SH73A0_CLK_IIC1 SH73A0_CLK_USB SH73A0_CLK_FLCTL
+				SH73A0_CLK_SDHI0 SH73A0_CLK_SDHI1
+				SH73A0_CLK_MMCIF0 SH73A0_CLK_SDHI2
+				SH73A0_CLK_TPU0 SH73A0_CLK_TPU1
+				SH73A0_CLK_TPU2 SH73A0_CLK_TPU3
+				SH73A0_CLK_TPU4
+			>;
+			clock-output-names =
+				"scifa6", "cmt1", "fsi", "irda", "iic1",
+				"usb", "flctl", "sdhi0", "sdhi1", "mmcif0", "sdhi2",
+				"tpu0", "tpu1", "tpu2", "tpu3", "tpu4";
+		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,sh73a0-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xe6150140 4>, <0xe615004c 4>;
+			clocks = <&cpg_clocks SH73A0_CLK_HP>,
+				 <&cpg_clocks SH73A0_CLK_HP>, <&extalr_clk>;
+			#clock-cells = <1>;
+			clock-indices = <
+				SH73A0_CLK_IIC3 SH73A0_CLK_IIC4
+				SH73A0_CLK_KEYSC
+			>;
+			clock-output-names =
+				"iic3", "iic4", "keysc";
+		};
+	};
+};
diff --git a/src/arm/socfpga.dtsi b/src/arm/socfpga.dtsi
new file mode 100644
index 000000000000..252c3d1bda50
--- /dev/null
+++ b/src/arm/socfpga.dtsi
@@ -0,0 +1,782 @@
+/*
+ *  Copyright (C) 2012 Altera <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/reset/altr,rst-mgr.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		timer0 = &timer0;
+		timer1 = &timer1;
+		timer2 = &timer2;
+		timer3 = &timer3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	intc: intc@fffed000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xfffed000 0x1000>,
+		      <0xfffec100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma: pdma@ffe01000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xffe01000 0x1000>;
+				interrupts = <0 104 4>,
+					     <0 105 4>,
+					     <0 106 4>,
+					     <0 107 4>,
+					     <0 108 4>,
+					     <0 109 4>,
+					     <0 110 4>,
+					     <0 111 4>;
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+				clocks = <&l4_main_clk>;
+				clock-names = "apb_pclk";
+			};
+		};
+
+		can0: can@ffc00000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc00000 0x1000>;
+			interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
+			clocks = <&can0_clk>;
+			status = "disabled";
+		};
+
+		can1: can@ffc01000 {
+			compatible = "bosch,d_can";
+			reg = <0xffc01000 0x1000>;
+			interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
+			clocks = <&can1_clk>;
+			status = "disabled";
+		};
+
+		clkmgr@ffd04000 {
+				compatible = "altr,clk-mgr";
+				reg = <0xffd04000 0x1000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					osc1: osc1 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					osc2: osc2 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_periph_ref_clk: f2s_periph_ref_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_sdram_ref_clk: f2s_sdram_ref_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					main_pll: main_pll {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>;
+						reg = <0x40>;
+
+						mpuclk: mpuclk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0xe0 0 9>;
+							reg = <0x48>;
+						};
+
+						mainclk: mainclk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0xe4 0 9>;
+							reg = <0x4C>;
+						};
+
+						dbg_base_clk: dbg_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0xe8 0 9>;
+							reg = <0x50>;
+						};
+
+						main_qspi_clk: main_qspi_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x54>;
+						};
+
+						main_nand_sdmmc_clk: main_nand_sdmmc_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x58>;
+						};
+
+						cfg_h2f_usr0_clk: cfg_h2f_usr0_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x5C>;
+						};
+					};
+
+					periph_pll: periph_pll {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
+						reg = <0x80>;
+
+						emac0_clk: emac0_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x88>;
+						};
+
+						emac1_clk: emac1_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x8C>;
+						};
+
+						per_qspi_clk: per_qsi_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x90>;
+						};
+
+						per_nand_mmc_clk: per_nand_mmc_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x94>;
+						};
+
+						per_base_clk: per_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x98>;
+						};
+
+						h2f_usr1_clk: h2f_usr1_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x9C>;
+						};
+					};
+
+					sdram_pll: sdram_pll {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
+						reg = <0xC0>;
+
+						ddr_dqs_clk: ddr_dqs_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xC8>;
+						};
+
+						ddr_2x_dqs_clk: ddr_2x_dqs_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xCC>;
+						};
+
+						ddr_dq_clk: ddr_dq_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xD0>;
+						};
+
+						h2f_usr2_clk: h2f_usr2_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-perip-clk";
+							clocks = <&sdram_pll>;
+							reg = <0xD4>;
+						};
+					};
+
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <4>;
+					};
+
+					mpu_l2_ram_clk: mpu_l2_ram_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mpuclk>;
+						fixed-divider = <2>;
+					};
+
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						clk-gate = <0x60 0>;
+					};
+
+					l3_main_clk: l3_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-perip-clk";
+						clocks = <&mainclk>;
+						fixed-divider = <1>;
+					};
+
+					l3_mp_clk: l3_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						div-reg = <0x64 0 2>;
+						clk-gate = <0x60 1>;
+					};
+
+					l3_sp_clk: l3_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>;
+						div-reg = <0x64 2 2>;
+					};
+
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 4 3>;
+						clk-gate = <0x60 2>;
+					};
+
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&mainclk>, <&per_base_clk>;
+						div-reg = <0x64 7 3>;
+						clk-gate = <0x60 3>;
+					};
+
+					dbg_at_clk: dbg_at_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x68 0 2>;
+						clk-gate = <0x60 4>;
+					};
+
+					dbg_clk: dbg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x68 2 2>;
+						clk-gate = <0x60 5>;
+					};
+
+					dbg_trace_clk: dbg_trace_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						div-reg = <0x6C 0 3>;
+						clk-gate = <0x60 6>;
+					};
+
+					dbg_timer_clk: dbg_timer_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&dbg_base_clk>;
+						clk-gate = <0x60 7>;
+					};
+
+					cfg_clk: cfg_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 8>;
+					};
+
+					h2f_user0_clk: h2f_user0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&cfg_h2f_usr0_clk>;
+						clk-gate = <0x60 9>;
+					};
+
+					emac_0_clk: emac_0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac0_clk>;
+						clk-gate = <0xa0 0>;
+					};
+
+					emac_1_clk: emac_1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&emac1_clk>;
+						clk-gate = <0xa0 1>;
+					};
+
+					usb_mp_clk: usb_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 2>;
+						div-reg = <0xa4 0 3>;
+					};
+
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 3>;
+						div-reg = <0xa4 3 3>;
+					};
+
+					can0_clk: can0_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 4>;
+						div-reg = <0xa4 6 3>;
+					};
+
+					can1_clk: can1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 5>;
+						div-reg = <0xa4 9 3>;
+					};
+
+					gpio_db_clk: gpio_db_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&per_base_clk>;
+						clk-gate = <0xa0 6>;
+						div-reg = <0xa8 0 24>;
+					};
+
+					h2f_user1_clk: h2f_user1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&h2f_usr1_clk>;
+						clk-gate = <0xa0 7>;
+					};
+
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 8>;
+						clk-phase = <0 135>;
+					};
+
+					nand_x_clk: nand_x_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 9>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+						clk-gate = <0xa0 10>;
+						fixed-divider = <4>;
+					};
+
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&f2s_periph_ref_clk>, <&main_qspi_clk>, <&per_qspi_clk>;
+						clk-gate = <0xa0 11>;
+					};
+				};
+			};
+
+		gmac0: ethernet@ff700000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+			reg = <0xff700000 0x2000>;
+			interrupts = <0 115 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+			clocks = <&emac0_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>;
+			reset-names = "stmmaceth";
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff702000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x60 2>;
+			reg = <0xff702000 0x2000>;
+			interrupts = <0 120 4>;
+			interrupt-names = "macirq";
+			mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
+			clocks = <&emac1_clk>;
+			clock-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>;
+			reset-names = "stmmaceth";
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@ffc04000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc04000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 158 0x4>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc05000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc05000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 159 0x4>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc06000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc06000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 160 0x4>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc07000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc07000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			interrupts = <0 161 0x4>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@ff708000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff708000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 164 4>;
+			};
+		};
+
+		gpio1: gpio@ff709000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff709000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 165 4>;
+			};
+		};
+
+		gpio2: gpio@ff70a000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xff70a000 0x1000>;
+			clocks = <&per_base_clk>;
+			status = "disabled";
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <27>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 166 4>;
+			};
+		};
+
+		sdr: sdr@ffc25000 {
+			compatible = "syscon";
+			reg = <0xffc25000 0x1000>;
+		};
+
+		sdramedac {
+			compatible = "altr,sdram-edac";
+			altr,sdr-syscon = <&sdr>;
+			interrupts = <0 39 4>;
+		};
+
+		L2: l2-cache@fffef000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xfffef000 0x1000>;
+			interrupts = <0 38 0x04>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <2 1 1>;
+		};
+
+		mmc: dwmmc0@ff704000 {
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff704000 0x1000>;
+			interrupts = <0 139 4>;
+			fifo-depth = <0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+			clock-names = "biu", "ciu";
+		};
+
+		ocram: sram@ffff0000 {
+			compatible = "mmio-sram";
+			reg = <0xffff0000 0x10000>;
+		};
+
+		spi0: spi@fff00000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 154 4>;
+			num-cs = <4>;
+			clocks = <&spi_m_clk>;
+			status = "disabled";
+		};
+
+		spi1: spi@fff01000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xfff01000 0x1000>;
+			interrupts = <0 156 4>;
+			num-cs = <4>;
+			clocks = <&spi_m_clk>;
+			status = "disabled";
+		};
+
+		/* Local timer */
+		timer@fffec600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xfffec600 0x100>;
+			interrupts = <1 13 0xf04>;
+			clocks = <&mpu_periph_clk>;
+		};
+
+		timer0: timer0@ffc08000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 167 4>;
+			reg = <0xffc08000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+		};
+
+		timer1: timer1@ffc09000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 168 4>;
+			reg = <0xffc09000 0x1000>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 169 4>;
+			reg = <0xffd00000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
+		};
+
+		timer3: timer3@ffd01000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 170 4>;
+			reg = <0xffd01000 0x1000>;
+			clocks = <&osc1>;
+			clock-names = "timer";
+		};
+
+		uart0: serial0@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x1000>;
+			interrupts = <0 162 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+		};
+
+		uart1: serial1@ffc03000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc03000 0x1000>;
+			interrupts = <0 163 4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+		};
+
+		rst: rstmgr@ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x1000>;
+		};
+
+		usbphy0: usbphy@0 {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0xffff>;
+			interrupts = <0 125 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0xffff>;
+			interrupts = <0 128 4>;
+			clocks = <&usb_mp_clk>;
+			clock-names = "otg";
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd02000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd02000 0x1000>;
+			interrupts = <0 171 4>;
+			clocks = <&osc1>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd03000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd03000 0x1000>;
+			interrupts = <0 172 4>;
+			clocks = <&osc1>;
+			status = "disabled";
+		};
+
+		sysmgr: sysmgr@ffd08000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd08000 0x4000>;
+		};
+	};
+};
diff --git a/src/arm/socfpga_arria10.dtsi b/src/arm/socfpga_arria10.dtsi
new file mode 100644
index 000000000000..8a05c47fd57f
--- /dev/null
+++ b/src/arm/socfpga_arria10.dtsi
@@ -0,0 +1,374 @@
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		timer0 = &timer0;
+		timer1 = &timer1;
+		timer2 = &timer2;
+		timer3 = &timer3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	intc: intc@ffffd000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xffffd000 0x1000>,
+		      <0xffffc100 0x100>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		amba {
+			compatible = "arm,amba-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pdma: pdma@ffda1000 {
+				compatible = "arm,pl330", "arm,primecell";
+				reg = <0xffda1000 0x1000>;
+				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 84 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 86 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 88 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 89 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 90 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				#dma-channels = <8>;
+				#dma-requests = <32>;
+			};
+		};
+
+		clkmgr@ffd04000 {
+				compatible = "altr,clk-mgr";
+				reg = <0xffd04000 0x1000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					osc1: osc1 {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					main_pll: main_pll {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>;
+					};
+
+					periph_pll: periph_pll {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-pll-clock";
+						clocks = <&osc1>;
+					};
+				};
+		};
+
+		gmac0: ethernet@ff800000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+			reg = <0xff800000 0x2000>;
+			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+		};
+
+		gmac1: ethernet@ff802000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+		        reg = <0xff802000 0x2000>;
+			interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+		};
+
+		gmac2: ethernet@ff804000 {
+			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+			reg = <0xff804000 0x2000>;
+			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			/* Filled in by bootloader */
+			mac-address = [00 00 00 00 00 00];
+			status = "disabled";
+		};
+
+		gpio0: gpio@ffc02900 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02900 0x100>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@ffc02a00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02a00 0x100>;
+			status = "disabled";
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <29>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@ffc02b00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0xffc02b00 0x100>;
+			status = "disabled";
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <27>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		i2c0: i2c@ffc02200 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02200 0x100>;
+			interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffc02300 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02300 0x100>;
+			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffc02400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02400 0x100>;
+			interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@ffc02500 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02500 0x100>;
+			interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@ffc02600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0xffc02600 0x100>;
+			interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		L2: l2-cache@fffff000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xfffff000 0x1000>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		mmc: dwmmc0@ff808000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "altr,socfpga-dw-mshc";
+			reg = <0xff808000 0x1000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <0x400>;
+		};
+
+		ocram: sram@ffe00000 {
+			compatible = "mmio-sram";
+			reg = <0xffe00000 0x40000>;
+		};
+
+		rst: rstmgr@ffd05000 {
+			#reset-cells = <1>;
+			compatible = "altr,rst-mgr";
+			reg = <0xffd05000 0x100>;
+		};
+
+		sysmgr: sysmgr@ffd06000 {
+			compatible = "altr,sys-mgr", "syscon";
+			reg = <0xffd06000 0x300>;
+		};
+
+		/* Local timer */
+		timer@ffffc600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xffffc600 0x100>;
+			interrupts = <1 13 0xf04>;
+		};
+
+		timer0: timer0@ffc02700 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc02700 0x100>;
+		};
+
+		timer1: timer1@ffc02800 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffc02800 0x100>;
+		};
+
+		timer2: timer2@ffd00000 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd00000 0x100>;
+		};
+
+		timer3: timer3@ffd00100 {
+			compatible = "snps,dw-apb-timer";
+			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0xffd01000 0x100>;
+		};
+
+		uart0: serial0@ffc02000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02000 0x100>;
+			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uart1: serial1@ffc02100 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0xffc02100 0x100>;
+			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		usbphy0: usbphy@0 {
+			#phy-cells = <0>;
+			compatible = "usb-nop-xceiv";
+			status = "okay";
+		};
+
+		usb0: usb@ffb00000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb00000 0xffff>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usb1: usb@ffb40000 {
+			compatible = "snps,dwc2";
+			reg = <0xffb40000 0xffff>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usbphy0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@ffd00200 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00200 0x100>;
+			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		watchdog1: watchdog@ffd00300 {
+			compatible = "snps,dw-wdt";
+			reg = <0xffd00300 0x100>;
+			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/socfpga_arria10_socdk.dts b/src/arm/socfpga_arria10_socdk.dts
new file mode 100755
index 000000000000..3015ce8d3057
--- /dev/null
+++ b/src/arm/socfpga_arria10_socdk.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2014 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria 10";
+	compatible = "altr,socfpga-arria10", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootwait";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		serial0@ffc02000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/socfpga_arria5.dtsi b/src/arm/socfpga_arria5.dtsi
new file mode 100644
index 000000000000..1907cc600452
--- /dev/null
+++ b/src/arm/socfpga_arria5.dtsi
@@ -0,0 +1,44 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		mmc0: dwmmc0@ff704000 {
+			num-slots = <1>;
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+	};
+};
diff --git a/src/arm/socfpga_arria5_socdk.dts b/src/arm/socfpga_arria5_socdk.dts
new file mode 100644
index 000000000000..ccaf41742fc3
--- /dev/null
+++ b/src/arm/socfpga_arria5_socdk.dts
@@ -0,0 +1,85 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_arria5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria V SoC Development Kit";
+	compatible = "altr,socfpga-arria5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		* to be added to the gmac1 device tree blob.
+		*/
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/src/arm/socfpga_cyclone5.dtsi b/src/arm/socfpga_cyclone5.dtsi
new file mode 100644
index 000000000000..06db951e06f8
--- /dev/null
+++ b/src/arm/socfpga_cyclone5.dtsi
@@ -0,0 +1,55 @@
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
+#include "socfpga.dtsi"
+
+/ {
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+
+		mmc0: dwmmc0@ff704000 {
+			num-slots = <1>;
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+		};
+
+		ethernet@ff702000 {
+			phy-mode = "rgmii";
+			phy-addr = <0xffffffff>; /* probe for phy addr */
+			status = "okay";
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd080c4>;
+		};
+	};
+};
+
+&watchdog0 {
+	status = "okay";
+};
diff --git a/src/arm/socfpga_cyclone5_socdk.dts b/src/arm/socfpga_cyclone5_socdk.dts
new file mode 100644
index 000000000000..258865da8f6a
--- /dev/null
+++ b/src/arm/socfpga_cyclone5_socdk.dts
@@ -0,0 +1,90 @@
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Cyclone V SoC Development Kit";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: 3-3-v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c32";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&portb 18 0>;
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/src/arm/socfpga_cyclone5_sockit.dts b/src/arm/socfpga_cyclone5_sockit.dts
new file mode 100644
index 000000000000..16ea6f5f2ab8
--- /dev/null
+++ b/src/arm/socfpga_cyclone5_sockit.dts
@@ -0,0 +1,70 @@
+/*
+ *  Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "Terasic SoCkit";
+	compatible = "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	aliases {
+		/* this allow the ethaddr uboot environmnet variable contents
+		 * to be added to the gmac1 device tree blob.
+		 */
+		ethernet0 = &gmac1;
+	};
+
+	regulator_3_3v: vcc3p3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+
+	rxd0-skew-ps = <0>;
+	rxd1-skew-ps = <0>;
+	rxd2-skew-ps = <0>;
+	rxd3-skew-ps = <0>;
+	txen-skew-ps = <0>;
+	txc-skew-ps = <2600>;
+	rxdv-skew-ps = <0>;
+	rxc-skew-ps = <2000>;
+};
+
+&mmc0 {
+	vmmc-supply = <&regulator_3_3v>;
+	vqmmc-supply = <&regulator_3_3v>;
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/src/arm/socfpga_cyclone5_socrates.dts b/src/arm/socfpga_cyclone5_socrates.dts
new file mode 100644
index 000000000000..a1814b457450
--- /dev/null
+++ b/src/arm/socfpga_cyclone5_socrates.dts
@@ -0,0 +1,50 @@
+/*
+ *  Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "socfpga_cyclone5.dtsi"
+
+/ {
+	model = "EBV SOCrates";
+	compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "stm,m41t82";
+		reg = <0x68>;
+	};
+};
+
+&mmc {
+	status = "okay";
+};
diff --git a/src/arm/socfpga_vt.dts b/src/arm/socfpga_vt.dts
new file mode 100644
index 000000000000..f9345e02ca49
--- /dev/null
+++ b/src/arm/socfpga_vt.dts
@@ -0,0 +1,90 @@
+/*
+ *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga.dtsi"
+
+/ {
+	model = "Altera SOCFPGA VT";
+	compatible = "altr,socfpga-vt", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,57600";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <10000000>;
+				};
+			};
+		};
+
+		dwmmc0@ff704000 {
+			num-slots = <1>;
+			broken-cd;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+		};
+
+		ethernet@ff700000 {
+			phy-mode = "gmii";
+			status = "okay";
+		};
+
+		timer0@ffc08000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer1@ffc09000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer2@ffd00000 {
+			clock-frequency = <7000000>;
+		};
+
+		timer3@ffd01000 {
+			clock-frequency = <7000000>;
+		};
+
+		serial0@ffc02000 {
+			clock-frequency = <7372800>;
+		};
+
+		serial1@ffc03000 {
+			clock-frequency = <7372800>;
+		};
+
+		sysmgr@ffd08000 {
+			cpu1-start-addr = <0xffd08010>;
+		};
+	};
+};
+
+&gmac0 {
+	status = "okay";
+	phy-mode = "gmii";
+};
diff --git a/src/arm/spear1310-evb.dts b/src/arm/spear1310-evb.dts
new file mode 100644
index 000000000000..d42c84b1df8d
--- /dev/null
+++ b/src/arm/spear1310-evb.dts
@@ -0,0 +1,427 @@
+/*
+ * DTS file for SPEAr1310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1310.dtsi"
+
+/ {
+	model = "ST SPEAr1310 Evaluation Board";
+	compatible = "st,spear1310-evb", "st,spear1310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2s0 {
+					st,pins = "i2s0_grp";
+					st,function = "i2s0";
+				};
+				i2s1 {
+					st,pins = "i2s1_grp";
+					st,function = "i2s1";
+				};
+				gpio {
+					st,pins = "arm_gpio_grp";
+					st,function = "arm_gpio";
+				};
+				clcd {
+					st,pins = "clcd_grp" , "clcd_high_res";
+					st,function = "clcd";
+				};
+				eth {
+					st,pins = "gmii_grp";
+					st,function = "gmii";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				kbd {
+					st,pins = "keyboard_6x6_grp";
+					st,function = "keyboard";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				smi-pmx {
+					st,pins = "smi_2_chips_grp";
+					st,function = "smi";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				rs485 {
+					st,pins = "rs485_0_1_tdm_0_1_grp";
+					st,function = "rs485_0_1_tdm_0_1";
+				};
+				i2c1_2 {
+					st,pins = "i2c_1_2_grp";
+					st,function = "i2c_1_2";
+				};
+				smii {
+					st,pins = "smii_0_1_2_grp";
+					st,function = "smii_0_1_2";
+				};
+				nand {
+					st,pins = "nand_8bit_grp",
+						"nand_16bit_grp";
+					st,function = "nand";
+				};
+				sata {
+					st,pins = "sata0_grp";
+					st,function = "sata";
+				};
+				pcie {
+					st,pins = "pcie1_grp", "pcie2_grp";
+					st,function = "pci_express";
+				};
+			};
+		};
+
+		ahci@b1000000 {
+			status = "okay";
+		};
+
+		miphy@eb800000 {
+			status = "okay";
+		};
+
+		cf@b2800000 {
+			status = "okay";
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "xloader";
+				reg = <0x0 0x80000>;
+			};
+			partition@80000 {
+				label = "u-boot";
+				reg = <0x80000 0x140000>;
+			};
+			partition@1C0000 {
+				label = "environment";
+				reg = <0x1C0000 0x40000>;
+			};
+			partition@200000 {
+				label = "dtb";
+				reg = <0x200000 0x40000>;
+			};
+			partition@240000 {
+				label = "linux";
+				reg = <0x240000 0xC00000>;
+			};
+			partition@E40000 {
+				label = "rootfs";
+				reg = <0xE40000 0x0>;
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			button@1 {
+				label = "wakeup";
+				linux,code = <0x100>;
+				gpios = <&gpio0 7 0x4>;
+				debounce-interval = <20>;
+				gpio-key,wakeup = <1>;
+			};
+		};
+
+		gmac0: eth@e2000000 {
+			phy-mode = "gmii";
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			gpio@d8400000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       suspended_rate = <2000000>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			spi0: spi@e0100000 {
+				status = "okay";
+				num-cs = <3>;
+				cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>;
+
+				stmpe610@0 {
+					compatible = "st,stmpe610";
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					spi-max-frequency = <1000000>;
+					spi-cpha;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x7>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+					interrupts = <6 0x4>;
+					interrupt-parent = <&gpio1>;
+					irq-trigger = <0x2>;
+
+					stmpe_touchscreen {
+						compatible = "st,stmpe-ts";
+						ts,sample-time = <4>;
+						ts,mod-12b = <1>;
+						ts,ref-sel = <0>;
+						ts,adc-freq = <1>;
+						ts,ave-ctrl = <1>;
+						ts,touch-det-delay = <2>;
+						ts,settling = <2>;
+						ts,fraction-z = <7>;
+						ts,i-drive = <1>;
+					};
+				};
+
+				m25p80@1 {
+					compatible = "st,m25p80";
+					reg = <1>;
+					spi-max-frequency = <12000000>;
+					spi-cpol;
+					spi-cpha;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0x2>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x11>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+				};
+
+				spidev@2 {
+					compatible = "spidev";
+					reg = <2>;
+					spi-max-frequency = <25000000>;
+					spi-cpha;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0x2>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x11>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+				};
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/spear1310.dtsi b/src/arm/spear1310.dtsi
new file mode 100644
index 000000000000..9d342920695a
--- /dev/null
+++ b/src/arm/spear1310.dtsi
@@ -0,0 +1,316 @@
+/*
+ * DTS file for all SPEAr1310 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1310";
+
+	ahb {
+		spics: spics@e0700000{
+			compatible = "st,spear-spics-gpio";
+			reg = <0xe0700000 0x1000>;
+			st-spics,peripcfg-reg = <0x3b0>;
+			st-spics,sw-enable-bit = <12>;
+			st-spics,cs-value-bit = <11>;
+			st-spics,cs-enable-mask = <3>;
+			st-spics,cs-enable-shift = <8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		miphy0: miphy@eb800000 {
+			compatible = "st,spear1310-miphy";
+			reg = <0xeb800000 0x4000>;
+			misc = <&misc>;
+			phy-id = <0>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		miphy1: miphy@eb804000 {
+			compatible = "st,spear1310-miphy";
+			reg = <0xeb804000 0x4000>;
+			misc = <&misc>;
+			phy-id = <1>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		miphy2: miphy@eb808000 {
+			compatible = "st,spear1310-miphy";
+			reg = <0xeb808000 0x4000>;
+			misc = <&misc>;
+			phy-id = <2>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ahci0: ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 68 0x4>;
+			phys = <&miphy0 0>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		ahci1: ahci@b1800000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1800000 0x10000>;
+			interrupts = <0 69 0x4>;
+			phys = <&miphy1 0>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		ahci2: ahci@b4000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb4000000 0x10000>;
+			interrupts = <0 70 0x4>;
+			phys = <&miphy2 0>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		pcie0: pcie@b1000000 {
+			compatible = "st,spear1340-pcie", "snps,dw-pcie";
+			reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
+			reg-names = "dbi", "config";
+			interrupts = <0 68 0x4>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0x0 0 &gic 0 68 0x4>;
+			num-lanes = <1>;
+			phys = <&miphy0 1>;
+			phy-names = "pcie-phy";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	 0x80020000 0 0x00010000   /* downstream I/O */
+				0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+			status = "disabled";
+		};
+
+		pcie1: pcie@b1800000 {
+			compatible = "st,spear1340-pcie", "snps,dw-pcie";
+			reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
+			reg-names = "dbi", "config";
+			interrupts = <0 69 0x4>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0x0 0 &gic 0 69 0x4>;
+			num-lanes = <1>;
+			phys = <&miphy1 1>;
+			phy-names = "pcie-phy";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0  0x90020000 0 0x00010000   /* downstream I/O */
+				0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */
+			status = "disabled";
+		};
+
+		pcie2: pcie@b4000000 {
+			compatible = "st,spear1340-pcie", "snps,dw-pcie";
+			reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
+			reg-names = "dbi", "config";
+			interrupts = <0 70 0x4>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0x0 0 &gic 0 70 0x4>;
+			num-lanes = <1>;
+			phys = <&miphy2 1>;
+			phy-names = "pcie-phy";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	 0xc0020000 0 0x00010000   /* downstream I/O */
+				0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+			status = "disabled";
+		};
+
+		gmac1: eth@5c400000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c400000 0x8000>;
+			interrupts = <0 95 0x4>;
+			interrupt-names = "macirq";
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		gmac2: eth@5c500000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c500000 0x8000>;
+			interrupts = <0 96 0x4>;
+			interrupt-names = "macirq";
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		gmac3: eth@5c600000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c600000 0x8000>;
+			interrupts = <0 97 0x4>;
+			interrupt-names = "macirq";
+			phy-mode = "rmii";
+			status = "disabled";
+		};
+
+		gmac4: eth@5c700000 {
+			compatible = "st,spear600-gmac";
+			reg = <0x5c700000 0x8000>;
+			interrupts = <0 98 0x4>;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			status = "disabled";
+		};
+
+		pinmux: pinmux@e0700000 {
+			compatible = "st,spear1310-pinmux";
+			reg = <0xe0700000 0x1000>;
+			#gpio-range-cells = <3>;
+		};
+
+		apb {
+			i2c1: i2c@5cd00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cd00000 0x1000>;
+				interrupts = <0 87 0x4>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@5ce00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5ce00000 0x1000>;
+				interrupts = <0 88 0x4>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@5cf00000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5cf00000 0x1000>;
+				interrupts = <0 89 0x4>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@5d000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d000000 0x1000>;
+				interrupts = <0 90 0x4>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@5d100000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d100000 0x1000>;
+				interrupts = <0 91 0x4>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@5d200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d200000 0x1000>;
+				interrupts = <0 92 0x4>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@5d300000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0x5d300000 0x1000>;
+				interrupts = <0 93 0x4>;
+				status = "disabled";
+			};
+
+			spi1: spi@5d400000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0x5d400000 0x1000>;
+				interrupts = <0 99 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			serial@5c800000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c800000 0x1000>;
+				interrupts = <0 82 0x4>;
+				status = "disabled";
+			};
+
+			serial@5c900000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5c900000 0x1000>;
+				interrupts = <0 83 0x4>;
+				status = "disabled";
+			};
+
+			serial@5ca00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5ca00000 0x1000>;
+				interrupts = <0 84 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cb00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cb00000 0x1000>;
+				interrupts = <0 85 0x4>;
+				status = "disabled";
+			};
+
+			serial@5cc00000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x5cc00000 0x1000>;
+				interrupts = <0 86 0x4>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x7000>;
+			};
+
+			gpiopinctrl: gpio@d8400000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xd8400000 0x1000>;
+				interrupts = <0 100 0x4>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 0 246>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <246>;
+				st-plgpio,enb-reg = <0xd0>;
+				st-plgpio,wdata-reg = <0x90>;
+				st-plgpio,dir-reg = <0xb0>;
+				st-plgpio,ie-reg = <0x30>;
+				st-plgpio,rdata-reg = <0x70>;
+				st-plgpio,mis-reg = <0x10>;
+				st-plgpio,eit-reg = <0x50>;
+			};
+		};
+	};
+};
diff --git a/src/arm/spear1340-evb.dts b/src/arm/spear1340-evb.dts
new file mode 100644
index 000000000000..b23e05ed1d60
--- /dev/null
+++ b/src/arm/spear1340-evb.dts
@@ -0,0 +1,525 @@
+/*
+ * DTS file for SPEAr1340 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear1340.dtsi"
+
+/ {
+	model = "ST SPEAr1340 Evaluation Board";
+	compatible = "st,spear1340-evb", "st,spear1340";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@e0700000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				pads_as_gpio {
+					st,pins = "pads_as_gpio_grp";
+					st,function = "pads_as_gpio";
+				};
+				fsmc {
+					st,pins = "fsmc_8bit_grp";
+					st,function = "fsmc";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				i2c1 {
+					st,pins = "i2c1_grp";
+					st,function = "i2c1";
+				};
+				spdif-in {
+					st,pins = "spdif_in_grp";
+					st,function = "spdif_in";
+				};
+				spdif-out {
+					st,pins = "spdif_out_grp";
+					st,function = "spdif_out";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp", "ssp0_cs1_grp", "ssp0_cs2_grp", "ssp0_cs3_grp";
+					st,function = "ssp0";
+				};
+				smi-pmx {
+					st,pins = "smi_grp";
+					st,function = "smi";
+				};
+				i2s {
+					st,pins = "i2s_in_grp", "i2s_out_grp";
+					st,function = "i2s";
+				};
+				gmac {
+					st,pins = "gmii_grp", "rgmii_grp";
+					st,function = "gmac";
+				};
+				cam0 {
+					st,pins = "cam0_grp";
+					st,function = "cam0";
+				};
+				cam1 {
+					st,pins = "cam1_grp";
+					st,function = "cam1";
+				};
+				cam2 {
+					st,pins = "cam2_grp";
+					st,function = "cam2";
+				};
+				cam3 {
+					st,pins = "cam3_grp";
+					st,function = "cam3";
+				};
+				cec0 {
+					st,pins = "cec0_grp";
+					st,function = "cec0";
+				};
+				cec1 {
+					st,pins = "cec1_grp";
+					st,function = "cec1";
+				};
+				sdhci {
+					st,pins = "sdhci_grp";
+					st,function = "sdhci";
+				};
+				clcd {
+					st,pins = "clcd_grp";
+					st,function = "clcd";
+				};
+				sata {
+					st,pins = "sata_grp";
+					st,function = "sata";
+				};
+				pcie {
+					st,pins = "pcie_grp";
+					st,function = "pcie";
+				};
+
+			};
+		};
+
+		ahci@b1000000 {
+			status = "okay";
+		};
+
+		miphy@eb800000 {
+			status = "okay";
+		};
+
+		dma@ea800000 {
+			status = "okay";
+		};
+
+		dma@eb000000 {
+			status = "okay";
+		};
+
+		fsmc: flash@b0000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "xloader";
+				reg = <0x0 0x200000>;
+			};
+			partition@200000 {
+				label = "u-boot";
+				reg = <0x200000 0x200000>;
+			};
+			partition@400000 {
+				label = "environment";
+				reg = <0x400000 0x100000>;
+			};
+			partition@500000 {
+				label = "dtb";
+				reg = <0x500000 0x100000>;
+			};
+			partition@600000 {
+				label = "linux";
+				reg = <0x600000 0xC00000>;
+			};
+			partition@1200000 {
+				label = "rootfs";
+				reg = <0x1200000 0x0>;
+			};
+		};
+
+		gmac0: eth@e2000000 {
+			phy-mode = "rgmii";
+			status = "okay";
+		};
+
+		sdhci@b3000000 {
+			status = "okay";
+		};
+
+		smi: flash@ea000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@e6000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xe6000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		ehci@e4800000 {
+			status = "okay";
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			button@1 {
+				label = "wakeup";
+				linux,code = <0x100>;
+				gpios = <&gpio1 1 0x4>;
+				debounce-interval = <20>;
+				gpio-key,wakeup = <1>;
+			};
+		};
+
+		ehci@e5800000 {
+			status = "okay";
+		};
+
+		i2s0: i2s-play@b2400000 {
+			status = "okay";
+		};
+
+		i2s1: i2s-rec@b2000000 {
+			status = "okay";
+		};
+
+		incodec: dir-hifi {
+			compatible = "dummy,dir-hifi";
+			status = "okay";
+		};
+
+		ohci@e4000000 {
+			status = "okay";
+		};
+
+		ohci@e5000000 {
+			status = "okay";
+		};
+
+		outcodec: dit-hifi {
+			compatible = "dummy,dit-hifi";
+			status = "okay";
+		};
+
+		sound {
+			compatible = "spear,spear-evb";
+			audio-controllers = <&spdif0 &spdif1 &i2s0 &i2s1>;
+			audio-codecs = <&incodec &outcodec &sta529 &sta529>;
+			codec_dai_name = "dir-hifi", "dit-hifi", "sta529-audio", "sta529-audio";
+			stream_name = "spdif-cap", "spdif-play", "i2s-play", "i2s-cap";
+			dai_name = "spdifin-pcm", "spdifout-pcm", "i2s0-pcm", "i2s1-pcm";
+			nr_controllers = <4>;
+		        status = "okay";
+		};
+
+		spdif0: spdif-in@d0100000 {
+			status = "okay";
+		};
+
+		spdif1: spdif-out@d0000000 {
+			status = "okay";
+		};
+
+		apb {
+			adc@e0080000 {
+				status = "okay";
+			};
+
+			i2s-play@b2400000 {
+				status = "okay";
+			};
+
+			i2s-rec@b2000000 {
+				status = "okay";
+			};
+
+			gpio0: gpio@e0600000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@e0680000 {
+			       status = "okay";
+			};
+
+			gpio@e2800000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@e0280000 {
+			       status = "okay";
+
+				sta529: sta529@1a {
+					compatible = "st,sta529";
+					reg = <0x1a>;
+				};
+			};
+
+			i2c1: i2c@b4000000 {
+			       status = "okay";
+
+				eeprom0@56 {
+					compatible = "st,eeprom";
+					reg = <0x56>;
+				};
+
+				stmpe801@41 {
+					compatible = "st,stmpe801";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x41>;
+					interrupts = <4 0x4>;
+					interrupt-parent = <&gpio0>;
+					irq-trigger = <0x2>;
+
+					stmpegpio: stmpe_gpio {
+						compatible = "st,stmpe-gpio";
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+			};
+
+			kbd@e0300000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       suspended_rate = <2000000>;
+			       status = "okay";
+			};
+
+			rtc@e0580000 {
+			       status = "okay";
+			};
+
+			serial@e0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b4100000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			spi0: spi@e0100000 {
+				status = "okay";
+				num-cs = <3>;
+				cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>,
+					   <&gpiopinctrl 85 0>;
+
+				m25p80@0 {
+					compatible = "m25p80";
+					reg = <0>;
+					spi-max-frequency = <12000000>;
+					spi-cpol;
+					spi-cpha;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0x2>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x11>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+				};
+
+				stmpe610@1 {
+					compatible = "st,stmpe610";
+					spi-max-frequency = <1000000>;
+					spi-cpha;
+					reg = <1>;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x7>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+					interrupts = <100 0>;
+					interrupt-parent = <&gpiopinctrl>;
+					irq-trigger = <0x2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					stmpe_touchscreen {
+						compatible = "st,stmpe-ts";
+						ts,sample-time = <4>;
+						ts,mod-12b = <1>;
+						ts,ref-sel = <0>;
+						ts,adc-freq = <1>;
+						ts,ave-ctrl = <1>;
+						ts,touch-det-delay = <2>;
+						ts,settling = <2>;
+						ts,fraction-z = <7>;
+						ts,i-drive = <1>;
+					};
+				};
+
+				spidev@2 {
+					compatible = "spidev";
+					reg = <2>;
+					spi-max-frequency = <25000000>;
+					spi-cpha;
+					pl022,hierarchy = <0>;
+					pl022,interface = <0>;
+					pl022,slave-tx-disable;
+					pl022,com-mode = <0x2>;
+					pl022,rx-level-trig = <0>;
+					pl022,tx-level-trig = <0>;
+					pl022,ctrl-len = <0x11>;
+					pl022,wait-state = <0>;
+					pl022,duplex = <0>;
+				};
+			};
+
+			timer@ec800600 {
+				status = "okay";
+			};
+
+			wdt@ec800620 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/spear1340.dtsi b/src/arm/spear1340.dtsi
new file mode 100644
index 000000000000..13e1aa33daa2
--- /dev/null
+++ b/src/arm/spear1340.dtsi
@@ -0,0 +1,174 @@
+/*
+ * DTS file for all SPEAr1340 SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear13xx.dtsi"
+
+/ {
+	compatible = "st,spear1340";
+
+	ahb {
+
+		spics: spics@e0700000{
+			compatible = "st,spear-spics-gpio";
+			reg = <0xe0700000 0x1000>;
+			st-spics,peripcfg-reg = <0x42c>;
+			st-spics,sw-enable-bit = <21>;
+			st-spics,cs-value-bit = <20>;
+			st-spics,cs-enable-mask = <3>;
+			st-spics,cs-enable-shift = <18>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		miphy0: miphy@eb800000 {
+			compatible = "st,spear1340-miphy";
+			reg = <0xeb800000 0x4000>;
+			misc = <&misc>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		ahci0: ahci@b1000000 {
+			compatible = "snps,spear-ahci";
+			reg = <0xb1000000 0x10000>;
+			interrupts = <0 72 0x4>;
+			phys = <&miphy0 0>;
+			phy-names = "sata-phy";
+			status = "disabled";
+		};
+
+		pcie0: pcie@b1000000 {
+			compatible = "st,spear1340-pcie", "snps,dw-pcie";
+			reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
+			reg-names = "dbi", "config";
+			interrupts = <0 68 0x4>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0x0 0 &gic 0 68 0x4>;
+			num-lanes = <1>;
+			phys = <&miphy0 1>;
+			phy-names = "pcie-phy";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	 0x80020000 0 0x00010000   /* downstream I/O */
+				0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
+			status = "disabled";
+		};
+
+		i2s-play@b2400000 {
+			compatible = "snps,designware-i2s";
+			reg = <0xb2400000 0x10000>;
+			interrupt-names = "play_irq";
+			interrupts = <0 98 0x4
+				      0 99 0x4>;
+			play;
+			channel = <8>;
+			status = "disabled";
+		};
+
+		i2s-rec@b2000000 {
+			compatible = "snps,designware-i2s";
+			reg = <0xb2000000 0x10000>;
+			interrupt-names = "record_irq";
+			interrupts = <0 100  0x4
+				      0 101 0x4>;
+			record;
+			channel = <8>;
+			status = "disabled";
+		};
+
+		pinmux: pinmux@e0700000 {
+			compatible = "st,spear1340-pinmux";
+			reg = <0xe0700000 0x1000>;
+			#gpio-range-cells = <3>;
+		};
+
+		pwm: pwm@e0180000 {
+			compatible ="st,spear13xx-pwm";
+			reg = <0xe0180000 0x1000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		spdif-in@d0100000 {
+			compatible = "st,spdif-in";
+			reg = < 0xd0100000 0x20000
+				0xd0110000 0x10000 >;
+			interrupts = <0 84 0x4>;
+			status = "disabled";
+		};
+
+		spdif-out@d0000000 {
+			compatible = "st,spdif-out";
+			reg = <0xd0000000 0x20000>;
+			interrupts = <0 85 0x4>;
+			status = "disabled";
+		};
+
+		spi1: spi@5d400000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x5d400000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0 99 0x4>;
+			status = "disabled";
+		};
+
+		apb {
+			i2c1: i2c@b4000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xb4000000 0x1000>;
+				interrupts = <0 104 0x4>;
+				write-16bit;
+				status = "disabled";
+			};
+
+			serial@b4100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb4100000 0x1000>;
+				interrupts = <0 105 0x4>;
+				status = "disabled";
+				dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */
+					<&dwdma0 0x680 0 1 0>; /* 0xD << 7 */
+				dma-names = "tx", "rx";
+			};
+
+			thermal@e07008c4 {
+				st,thermal-flags = <0x2a00>;
+			};
+
+			gpiopinctrl: gpio@e2800000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xe2800000 0x1000>;
+				interrupts = <0 107 0x4>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 0 252>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <250>;
+				st-plgpio,wdata-reg = <0x40>;
+				st-plgpio,dir-reg = <0x00>;
+				st-plgpio,ie-reg = <0x80>;
+				st-plgpio,rdata-reg = <0x20>;
+				st-plgpio,mis-reg = <0xa0>;
+				st-plgpio,eit-reg = <0x60>;
+			};
+		};
+	};
+};
diff --git a/src/arm/spear13xx.dtsi b/src/arm/spear13xx.dtsi
new file mode 100644
index 000000000000..40accc87e3a2
--- /dev/null
+++ b/src/arm/spear13xx.dtsi
@@ -0,0 +1,343 @@
+/*
+ * DTS file for all SPEAr13xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	gic: interrupt-controller@ec801000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0xec801000 0x1000 >,
+		      < 0xec800100 0x0100 >;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 6 0x04
+			      0 7 0x04>;
+	};
+
+	L2: l2-cache {
+		    compatible = "arm,pl310-cache";
+		    reg = <0xed000000 0x1000>;
+		    cache-unified;
+		    cache-level = <2>;
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAMA0,115200";
+	};
+
+	cpufreq {
+		compatible = "st,cpufreq-spear";
+		cpufreq_tbl = < 166000
+				200000
+				250000
+				300000
+				400000
+				500000
+				600000 >;
+		status = "disabled";
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x50000000 0x50000000 0x10000000
+			  0x80000000 0x80000000 0x20000000
+			  0xb0000000 0xb0000000 0x22000000
+			  0xd8000000 0xd8000000 0x01000000
+			  0xe0000000 0xe0000000 0x10000000>;
+
+		sdhci@b3000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0xb3000000 0x100>;
+			interrupts = <0 28 0x4>;
+			status = "disabled";
+		};
+
+		cf@b2800000 {
+			compatible = "arasan,cf-spear1340";
+			reg = <0xb2800000 0x1000>;
+			interrupts = <0 29 0x4>;
+			status = "disabled";
+			dmas = <&dwdma0 0 0 0 0>;
+			dma-names = "data";
+		};
+
+		dwdma0: dma@ea800000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xea800000 0x1000>;
+			interrupts = <0 19 0x4>;
+			status = "disabled";
+
+			dma-channels = <8>;
+			#dma-cells = <3>;
+			dma-requests = <32>;
+			chan_allocation_order = <1>;
+			chan_priority = <1>;
+			block_size = <0xfff>;
+			dma-masters = <2>;
+			data_width = <3 3>;
+		};
+
+		dma@eb000000 {
+			compatible = "snps,dma-spear1340";
+			reg = <0xeb000000 0x1000>;
+			interrupts = <0 59 0x4>;
+			status = "disabled";
+
+			dma-requests = <32>;
+			dma-channels = <8>;
+			dma-masters = <2>;
+			#dma-cells = <3>;
+			chan_allocation_order = <1>;
+			chan_priority = <1>;
+			block_size = <0xfff>;
+			data_width = <3 3>;
+		};
+
+		fsmc: flash@b0000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xb0000000 0x1000	/* FSMC Register*/
+			       0xb0800000 0x0010	/* NAND Base DATA */
+			       0xb0820000 0x0010	/* NAND Base ADDR */
+			       0xb0810000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+			interrupts = <0 20 0x4
+				      0 21 0x4
+				      0 22 0x4
+				      0 23 0x4>;
+			st,mode = <2>;
+			status = "disabled";
+		};
+
+		gmac0: eth@e2000000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe2000000 0x8000>;
+			interrupts = <0 33 0x4
+				      0 34 0x4>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		pcm {
+			compatible = "st,pcm-audio";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		smi: flash@ea000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xea000000 0x1000>;
+			interrupts = <0 30 0x4>;
+			status = "disabled";
+		};
+
+		ehci@e4800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe4800000 0x1000>;
+			interrupts = <0 64 0x4>;
+			usbh0_id = <0>;
+			status = "disabled";
+		};
+
+		ehci@e5800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe5800000 0x1000>;
+			interrupts = <0 66 0x4>;
+			usbh1_id = <1>;
+			status = "disabled";
+		};
+
+		ohci@e4000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe4000000 0x1000>;
+			interrupts = <0 65 0x4>;
+			usbh0_id = <0>;
+			status = "disabled";
+		};
+
+		ohci@e5000000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe5000000 0x1000>;
+			interrupts = <0 67 0x4>;
+			usbh1_id = <1>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x50000000 0x50000000 0x10000000
+				  0xb0000000 0xb0000000 0x10000000
+				  0xd0000000 0xd0000000 0x02000000
+				  0xd8000000 0xd8000000 0x01000000
+				  0xe0000000 0xe0000000 0x10000000>;
+
+			misc: syscon@e0700000 {
+				compatible = "st,spear1340-misc", "syscon";
+				reg = <0xe0700000 0x1000>;
+			};
+
+			gpio0: gpio@e0600000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0600000 0x1000>;
+				interrupts = <0 24 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@e0680000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xe0680000 0x1000>;
+				interrupts = <0 25 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			kbd@e0300000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xe0300000 0x1000>;
+				interrupts = <0 52 0x4>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@e0280000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xe0280000 0x1000>;
+				interrupts = <0 41 0x4>;
+				status = "disabled";
+			};
+
+			i2s@e0180000 {
+				compatible = "st,designware-i2s";
+				reg = <0xe0180000 0x1000>;
+				interrupt-names = "play_irq", "record_irq";
+				interrupts = <0 10 0x4
+					      0 11 0x4 >;
+				status = "disabled";
+			};
+
+			i2s@e0200000 {
+				compatible = "st,designware-i2s";
+				reg = <0xe0200000 0x1000>;
+				interrupt-names = "play_irq", "record_irq";
+				interrupts = <0 26 0x4
+					      0 53 0x4>;
+				status = "disabled";
+			};
+
+			spi0: spi@e0100000 {
+				compatible = "arm,pl022", "arm,primecell";
+				reg = <0xe0100000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <0 31 0x4>;
+				status = "disabled";
+				dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
+					<&dwdma0 0x0280 0 0 0>;  /* 0x5 << 7 */
+				dma-names = "tx", "rx";
+			};
+
+			rtc@e0580000 {
+				compatible = "st,spear600-rtc";
+				reg = <0xe0580000 0x1000>;
+				interrupts = <0 36 0x4>;
+				status = "disabled";
+			};
+
+			serial@e0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xe0000000 0x1000>;
+				interrupts = <0 35 0x4>;
+				status = "disabled";
+			};
+
+			adc@e0080000 {
+				compatible = "st,spear600-adc";
+				reg = <0xe0080000 0x1000>;
+				interrupts = <0 12 0x4>;
+				status = "disabled";
+			};
+
+			timer@e0380000 {
+				compatible = "st,spear-timer";
+				reg = <0xe0380000 0x400>;
+				interrupts = <0 37 0x4>;
+			};
+
+			timer@ec800600 {
+				compatible = "arm,cortex-a9-twd-timer";
+				reg = <0xec800600 0x20>;
+				interrupts = <1 13 0x4>;
+				status = "disabled";
+			};
+
+			wdt@ec800620 {
+				compatible = "arm,cortex-a9-twd-wdt";
+				reg = <0xec800620 0x20>;
+				status = "disabled";
+			};
+
+			thermal@e07008c4 {
+				compatible = "st,thermal-spear1340";
+				reg = <0xe07008c4 0x4>;
+				thermal_flags = <0x7000>;
+			};
+		};
+	};
+};
diff --git a/src/arm/spear300-evb.dts b/src/arm/spear300-evb.dts
new file mode 100644
index 000000000000..5de1431653e4
--- /dev/null
+++ b/src/arm/spear300-evb.dts
@@ -0,0 +1,255 @@
+/*
+ * DTS file for SPEAr300 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear300.dtsi"
+
+/ {
+	model = "ST SPEAr300 Evaluation Board";
+	compatible = "st,spear300-evb", "st,spear300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@99000000 {
+			st,pinmux-mode = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				clcd {
+					st,pins = "clcd_pfmode_grp";
+					st,function = "clcd";
+				};
+				sdhci {
+					st,pins = "sdhci_4bit_grp";
+					st,function = "sdhci";
+				};
+				gpio1 {
+					st,pins = "gpio1_4_to_7_grp",
+						"gpio1_0_to_3_grp";
+					st,function = "gpio1";
+				};
+			};
+		};
+
+		clcd@60000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@94000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			cd-gpios = <&gpio1 0 0>;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@a9000000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			kbd@a0000000 {
+				linux,keymap = < 0x00000001
+						 0x00010002
+						 0x00020003
+						 0x00030004
+						 0x00040005
+						 0x00050006
+						 0x00060007
+						 0x00070008
+						 0x00080009
+						 0x0100000a
+						 0x0101000c
+						 0x0102000d
+						 0x0103000e
+						 0x0104000f
+						 0x01050010
+						 0x01060011
+						 0x01070012
+						 0x01080013
+						 0x02000014
+						 0x02010015
+						 0x02020016
+						 0x02030017
+						 0x02040018
+						 0x02050019
+						 0x0206001a
+						 0x0207001b
+						 0x0208001c
+						 0x0300001d
+						 0x0301001e
+						 0x0302001f
+						 0x03030020
+						 0x03040021
+						 0x03050022
+						 0x03060023
+						 0x03070024
+						 0x03080025
+						 0x04000026
+						 0x04010027
+						 0x04020028
+						 0x04030029
+						 0x0404002a
+						 0x0405002b
+						 0x0406002c
+						 0x0407002d
+						 0x0408002e
+						 0x0500002f
+						 0x05010030
+						 0x05020031
+						 0x05030032
+						 0x05040033
+						 0x05050034
+						 0x05060035
+						 0x05070036
+						 0x05080037
+						 0x06000038
+						 0x06010039
+						 0x0602003a
+						 0x0603003b
+						 0x0604003c
+						 0x0605003d
+						 0x0606003e
+						 0x0607003f
+						 0x06080040
+						 0x07000041
+						 0x07010042
+						 0x07020043
+						 0x07030044
+						 0x07040045
+						 0x07050046
+						 0x07060047
+						 0x07070048
+						 0x07080049
+						 0x0800004a
+						 0x0801004b
+						 0x0802004c
+						 0x0803004d
+						 0x0804004e
+						 0x0805004f
+						 0x08060050
+						 0x08070051
+						 0x08080052 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/spear300.dtsi b/src/arm/spear300.dtsi
new file mode 100644
index 000000000000..f79b3dfaabe6
--- /dev/null
+++ b/src/arm/spear300.dtsi
@@ -0,0 +1,89 @@
+/*
+ * DTS file for SPEAr300 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x60000000 0x60000000 0x50000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux@99000000 {
+			compatible = "st,spear300-pinmux";
+			reg = <0x99000000 0x1000>;
+		};
+
+		clcd@60000000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x60000000 0x1000>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		fsmc: flash@94000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x94000000 0x1000	/* FSMC Register */
+			       0x80000000 0x0010	/* NAND Base DATA */
+			       0x80020000 0x0010	/* NAND Base ADDR */
+			       0x80010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <1>;
+			status = "disabled";
+		};
+
+		shirq: interrupt-controller@0x50000000 {
+			compatible = "st,spear300-shirq";
+			reg = <0x50000000 0x1000>;
+			interrupts = <28>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			gpio1: gpio@a9000000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xa9000000 0x1000>;
+				interrupts = <8>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			kbd@a0000000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xa0000000 0x1000>;
+				interrupts = <7>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/src/arm/spear310-evb.dts b/src/arm/spear310-evb.dts
new file mode 100644
index 000000000000..b09632963d15
--- /dev/null
+++ b/src/arm/spear310-evb.dts
@@ -0,0 +1,208 @@
+/*
+ * DTS file for SPEAr310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear310.dtsi"
+
+/ {
+	model = "ST SPEAr310 Evaluation Board";
+	compatible = "st,spear310-evb", "st,spear310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@b4000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				gpio0 {
+					st,pins = "gpio0_pin0_grp",
+						"gpio0_pin1_grp",
+						"gpio0_pin2_grp",
+						"gpio0_pin3_grp",
+						"gpio0_pin4_grp",
+						"gpio0_pin5_grp";
+					st,function = "gpio0";
+				};
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				emi {
+					st,pins = "emi_cs_0_to_5_grp";
+					st,function = "emi";
+				};
+				fsmc {
+					st,pins = "fsmc_grp";
+					st,function = "fsmc";
+				};
+				uart1 {
+					st,pins = "uart1_grp";
+					st,function = "uart1";
+				};
+				uart2 {
+					st,pins = "uart2_grp";
+					st,function = "uart2";
+				};
+				uart3 {
+					st,pins = "uart3_grp";
+					st,function = "uart3";
+				};
+				uart4 {
+					st,pins = "uart4_grp";
+					st,function = "uart4";
+				};
+				uart5 {
+					st,pins = "uart5_grp";
+					st,function = "uart5";
+				};
+			};
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@44000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b2000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b2080000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b2100000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b2180000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@b2200000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/spear310.dtsi b/src/arm/spear310.dtsi
new file mode 100644
index 000000000000..95372080eea6
--- /dev/null
+++ b/src/arm/spear310.dtsi
@@ -0,0 +1,118 @@
+/*
+ * DTS file for SPEAr310 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux: pinmux@b4000000 {
+			compatible = "st,spear310-pinmux";
+			reg = <0xb4000000 0x1000>;
+			#gpio-range-cells = <3>;
+		};
+
+		fsmc: flash@44000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x44000000 0x1000	/* FSMC Register */
+			       0x40000000 0x0010	/* NAND Base DATA */
+			       0x40020000 0x0010	/* NAND Base ADDR */
+			       0x40010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+			status = "disabled";
+		};
+
+		shirq: interrupt-controller@0xb4000000 {
+			compatible = "st,spear310-shirq";
+			reg = <0xb4000000 0x1000>;
+			interrupts = <28 29 30 1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xb0000000 0xb0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			serial@b2000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2000000 0x1000>;
+				interrupts = <8>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@b2080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2080000 0x1000>;
+				interrupts = <9>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@b2100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2100000 0x1000>;
+				interrupts = <10>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@b2180000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2180000 0x1000>;
+				interrupts = <11>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@b2200000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2200000 0x1000>;
+				interrupts = <12>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			gpiopinctrl: gpio@b4000000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xb4000000 0x1000>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 0 102>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <102>;
+				st-plgpio,enb-reg = <0x10>;
+				st-plgpio,wdata-reg = <0x20>;
+				st-plgpio,dir-reg = <0x30>;
+				st-plgpio,ie-reg = <0x50>;
+				st-plgpio,rdata-reg = <0x40>;
+				st-plgpio,mis-reg = <0x60>;
+			};
+		};
+	};
+};
diff --git a/src/arm/spear320-evb.dts b/src/arm/spear320-evb.dts
new file mode 100644
index 000000000000..fdedbb514102
--- /dev/null
+++ b/src/arm/spear320-evb.dts
@@ -0,0 +1,207 @@
+/*
+ * DTS file for SPEAr320 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear320.dtsi"
+
+/ {
+	model = "ST SPEAr320 Evaluation Board";
+	compatible = "st,spear320-evb", "st,spear320";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@b3000000 {
+			st,pinmux-mode = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				mii0 {
+					st,pins = "mii0_grp";
+					st,function = "mii0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				sdhci {
+					st,pins = "sdhci_cd_51_grp";
+					st,function = "sdhci";
+				};
+				i2s {
+					st,pins = "i2s_grp";
+					st,function = "i2s";
+				};
+				uart1 {
+					st,pins = "uart1_grp";
+					st,function = "uart1";
+				};
+				uart2 {
+					st,pins = "uart2_grp";
+					st,function = "uart2";
+				};
+				can0 {
+					st,pins = "can0_grp";
+					st,function = "can0";
+				};
+				can1 {
+					st,pins = "can1_grp";
+					st,function = "can1";
+				};
+				mii2 {
+					st,pins = "mii2_grp";
+					st,function = "mii2";
+				};
+				pwm0_1 {
+					st,pins = "pwm0_1_pin_37_38_grp";
+					st,function = "pwm0_1";
+				};
+			};
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@4c000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			power-gpio = <&gpiopinctrl 61 1>;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		spi1: spi@a5000000 {
+			status = "okay";
+		};
+
+		spi2: spi@a6000000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			gpio@b3000000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@a7000000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@a3000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@a4000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/spear320-hmi.dts b/src/arm/spear320-hmi.dts
new file mode 100644
index 000000000000..0aa6fef5ce22
--- /dev/null
+++ b/src/arm/spear320-hmi.dts
@@ -0,0 +1,305 @@
+/*
+ * DTS file for SPEAr320 Evaluation Baord
+ *
+ * Copyright 2012 Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear320.dtsi"
+
+/ {
+	model = "ST SPEAr320 HMI Board";
+	compatible = "st,spear320-hmi", "st,spear320";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		pinmux@b3000000 {
+			st,pinmux-mode = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				i2c0 {
+					st,pins = "i2c0_grp";
+					st,function = "i2c0";
+				};
+				ssp0 {
+					st,pins = "ssp0_grp";
+					st,function = "ssp0";
+				};
+				uart0 {
+					st,pins = "uart0_grp";
+					st,function = "uart0";
+				};
+				clcd {
+					st,pins = "clcd_grp";
+					st,function = "clcd";
+				};
+				fsmc {
+					st,pins = "fsmc_8bit_grp";
+					st,function = "fsmc";
+				};
+				sdhci {
+					st,pins = "sdhci_cd_12_grp";
+					st,function = "sdhci";
+				};
+				i2s {
+					st,pins = "i2s_grp";
+					st,function = "i2s";
+				};
+				uart1 {
+					st,pins = "uart1_grp";
+					st,function = "uart1";
+				};
+				uart2 {
+					st,pins = "uart2_grp";
+					st,function = "uart2";
+				};
+				can0 {
+					st,pins = "can0_grp";
+					st,function = "can0";
+				};
+				can1 {
+					st,pins = "can1_grp";
+					st,function = "can1";
+				};
+				mii0_1 {
+					st,pins = "rmii0_1_grp";
+					st,function = "mii0_1";
+				};
+				pwm0_1 {
+					st,pins = "pwm0_1_pin_37_38_grp";
+					st,function = "pwm0_1";
+				};
+				pwm2 {
+					st,pins = "pwm2_pin_34_grp";
+					st,function = "pwm2";
+				};
+			};
+		};
+
+		clcd@90000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		fsmc: flash@4c000000 {
+			status = "okay";
+
+			partition@0 {
+				label = "xloader";
+				reg = <0x0 0x80000>;
+			};
+			partition@80000 {
+				label = "u-boot";
+				reg = <0x80000 0x140000>;
+			};
+			partition@1C0000 {
+				label = "environment";
+				reg = <0x1C0000 0x40000>;
+			};
+			partition@200000 {
+				label = "dtb";
+				reg = <0x200000 0x40000>;
+			};
+			partition@240000 {
+				label = "linux";
+				reg = <0x240000 0xC00000>;
+			};
+			partition@E40000 {
+				label = "rootfs";
+				reg = <0xE40000 0x0>;
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			button@1 {
+				label = "user button 1";
+				linux,code = <0x100>;
+				gpios = <&stmpegpio 3 0x4>;
+				debounce-interval = <20>;
+				gpio-key,wakeup = <1>;
+			};
+
+			button@2 {
+				label = "user button 2";
+				linux,code = <0x200>;
+				gpios = <&stmpegpio 2 0x4>;
+				debounce-interval = <20>;
+				gpio-key,wakeup = <1>;
+			};
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		pwm: pwm@a8000000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			power-gpio = <&gpiopinctrl 50 1>;
+			power_always_enb;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		spi1: spi@a5000000 {
+			status = "okay";
+		};
+
+		spi2: spi@a6000000 {
+			status = "okay";
+		};
+
+		usbd@e1100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			gpio@b3000000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+				status = "okay";
+
+				stmpe811@41 {
+					compatible = "st,stmpe811";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x41>;
+					irq-over-gpio;
+					irq-gpios = <&gpiopinctrl 29 0x4>;
+					id = <0>;
+					blocks = <0x5>;
+					irq-trigger = <0x1>;
+
+					stmpegpio: stmpe-gpio {
+						compatible = "stmpe,gpio";
+						reg = <0>;
+						gpio-controller;
+						#gpio-cells = <2>;
+						gpio,norequest-mask = <0xF3>;
+					};
+
+					stmpe610-ts {
+						compatible = "stmpe,ts";
+						reg = <0>;
+						ts,sample-time = <4>;
+						ts,mod-12b = <1>;
+						ts,ref-sel = <0>;
+						ts,adc-freq = <1>;
+						ts,ave-ctrl = <1>;
+						ts,touch-det-delay = <3>;
+						ts,settling = <4>;
+						ts,fraction-z = <7>;
+						ts,i-drive = <1>;
+					};
+				};
+			};
+
+			i2c1: i2c@a7000000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@a3000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@a4000000 {
+			       status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/spear320.dtsi b/src/arm/spear320.dtsi
new file mode 100644
index 000000000000..ffea342aeec9
--- /dev/null
+++ b/src/arm/spear320.dtsi
@@ -0,0 +1,147 @@
+/*
+ * DTS file for SPEAr320 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x80000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		pinmux: pinmux@b3000000 {
+			compatible = "st,spear320-pinmux";
+			reg = <0xb3000000 0x1000>;
+			#gpio-range-cells = <3>;
+		};
+
+		clcd@90000000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x90000000 0x1000>;
+			interrupts = <8>;
+			interrupt-parent = <&shirq>;
+			status = "disabled";
+		};
+
+		fsmc: flash@4c000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x4c000000 0x1000	/* FSMC Register */
+			       0x50000000 0x0010	/* NAND Base DATA */
+			       0x50020000 0x0010	/* NAND Base ADDR */
+			       0x50010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <10>;
+			interrupt-parent = <&shirq>;
+			status = "disabled";
+		};
+
+		shirq: interrupt-controller@0xb3000000 {
+			compatible = "st,spear320-shirq";
+			reg = <0xb3000000 0x1000>;
+			interrupts = <30 28 29 1>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+		};
+
+		spi1: spi@a5000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa5000000 0x1000>;
+			interrupts = <15>;
+			interrupt-parent = <&shirq>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@a6000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa6000000 0x1000>;
+			interrupts = <16>;
+			interrupt-parent = <&shirq>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@a8000000 {
+			compatible ="st,spear-pwm";
+			reg = <0xa8000000 0x1000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+                };
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x20000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			i2c1: i2c@a7000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xa7000000 0x1000>;
+				interrupts = <21>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@a3000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa3000000 0x1000>;
+				interrupts = <13>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			serial@a4000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa4000000 0x1000>;
+				interrupts = <14>;
+				interrupt-parent = <&shirq>;
+				status = "disabled";
+			};
+
+			gpiopinctrl: gpio@b3000000 {
+				compatible = "st,spear-plgpio";
+				reg = <0xb3000000 0x1000>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-ranges = <&pinmux 0 0 102>;
+				status = "disabled";
+
+				st-plgpio,ngpio = <102>;
+				st-plgpio,enb-reg = <0x24>;
+				st-plgpio,wdata-reg = <0x34>;
+				st-plgpio,dir-reg = <0x44>;
+				st-plgpio,ie-reg = <0x64>;
+				st-plgpio,rdata-reg = <0x54>;
+				st-plgpio,mis-reg = <0x84>;
+				st-plgpio,eit-reg = <0x94>;
+			};
+		};
+	};
+};
diff --git a/src/arm/spear3xx.dtsi b/src/arm/spear3xx.dtsi
new file mode 100644
index 000000000000..f0e3fcf8e323
--- /dev/null
+++ b/src/arm/spear3xx.dtsi
@@ -0,0 +1,157 @@
+/*
+ * DTS file for all SPEAr3xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&vic>;
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+		vic: interrupt-controller@f1100000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xf1100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <8>;
+			status = "disabled";
+		};
+
+		gmac: eth@e0800000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe0800000 0x8000>;
+			interrupts = <23 22>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			phy-mode = "mii";
+			status = "disabled";
+		};
+
+		smi: flash@fc000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xfc000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		spi0: spi@d0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xd0100000 0x1000>;
+			interrupts = <20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ehci@e1800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe1800000 0x1000>;
+			interrupts = <26>;
+			status = "disabled";
+		};
+
+		ohci@e1900000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe1900000 0x1000>;
+			interrupts = <25>;
+			status = "disabled";
+		};
+
+		ohci@e2100000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe2100000 0x1000>;
+			interrupts = <27>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+			gpio0: gpio@fc980000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xfc980000 0x1000>;
+				interrupts = <11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@d0180000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xd0180000 0x1000>;
+				interrupts = <21>;
+				status = "disabled";
+			};
+
+			rtc@fc900000 {
+				compatible = "st,spear600-rtc";
+				reg = <0xfc900000 0x1000>;
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			serial@d0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xd0000000 0x1000>;
+				interrupts = <19>;
+				status = "disabled";
+			};
+
+			wdt@fc880000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0xfc880000 0x1000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupts = <2>;
+			};
+		};
+	};
+};
diff --git a/src/arm/spear600-evb.dts b/src/arm/spear600-evb.dts
new file mode 100644
index 000000000000..d865a891776d
--- /dev/null
+++ b/src/arm/spear600-evb.dts
@@ -0,0 +1,116 @@
+/*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear600.dtsi"
+
+/ {
+	model = "ST SPEAr600 Evaluation Board";
+	compatible = "st,spear600-evb", "st,spear600";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+
+	ahb {
+		clcd@fc200000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ehci@e2000000 {
+			status = "okay";
+		};
+
+		gmac: ethernet@e0800000 {
+			phy-mode = "gmii";
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0xf8000000 0x800000>;
+				st,smi-fast-mode;
+
+				partition@0 {
+					label = "xloader";
+					reg = <0x0 0x10000>;
+				};
+				partition@10000 {
+					label = "u-boot";
+					reg = <0x10000 0x50000>;
+				};
+				partition@60000 {
+					label = "environment";
+					reg = <0x60000 0x10000>;
+				};
+				partition@70000 {
+					label = "dtb";
+					reg = <0x70000 0x10000>;
+				};
+				partition@80000 {
+					label = "linux";
+					reg = <0x80000 0x310000>;
+				};
+				partition@390000 {
+					label = "rootfs";
+					reg = <0x390000 0x0>;
+				};
+			};
+		};
+
+		apb {
+			serial@d0000000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			serial@d0080000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <>;
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			i2c@d0200000 {
+				clock-frequency = <400000>;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/src/arm/spear600.dtsi b/src/arm/spear600.dtsi
new file mode 100644
index 000000000000..9f60a7b6a42b
--- /dev/null
+++ b/src/arm/spear600.dtsi
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "st,spear600";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+		vic0: interrupt-controller@f1100000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xf1100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		vic1: interrupt-controller@f1000000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xf1000000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		clcd@fc200000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0xfc200000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <12>;
+			status = "disabled";
+		};
+
+		dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <10>;
+			status = "disabled";
+		};
+
+		gmac: ethernet@e0800000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe0800000 0x8000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24 23>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			phy-mode = "gmii";
+			status = "disabled";
+		};
+
+		fsmc: flash@d1800000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xd1800000 0x1000	/* FSMC Register */
+			       0xd2000000 0x0010	/* NAND Base DATA */
+			       0xd2020000 0x0010	/* NAND Base ADDR */
+			       0xd2010000 0x0010>;	/* NAND Base CMD */
+			reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+			status = "disabled";
+		};
+
+		smi: flash@fc000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xfc000000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <12>;
+			status = "disabled";
+		};
+
+		ehci@e1800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe1800000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+			status = "disabled";
+		};
+
+		ehci@e2000000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe2000000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <29>;
+			status = "disabled";
+		};
+
+		ohci@e1900000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe1900000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <26>;
+			status = "disabled";
+		};
+
+		ohci@e2100000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe2100000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <28>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+			serial@d0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xd0000000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <24>;
+				status = "disabled";
+			};
+
+			serial@d0080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xd0080000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <25>;
+				status = "disabled";
+			};
+
+			/* local/cpu GPIO */
+			gpio0: gpio@f0100000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xf0100000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <18>;
+			};
+
+			/* basic GPIO */
+			gpio1: gpio@fc980000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xfc980000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <19>;
+			};
+
+			/* appl GPIO */
+			gpio2: gpio@d8100000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xd8100000 0x1000>;
+				interrupt-parent = <&vic1>;
+				interrupts = <4>;
+			};
+
+			i2c@d0200000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xd0200000 0x1000>;
+				interrupt-parent = <&vic0>;
+				interrupts = <28>;
+				status = "disabled";
+			};
+
+			rtc@fc900000 {
+				compatible = "st,spear600-rtc";
+				reg = <0xfc900000 0x1000>;
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			timer@f0000000 {
+				compatible = "st,spear-timer";
+				reg = <0xf0000000 0x400>;
+				interrupt-parent = <&vic0>;
+				interrupts = <16>;
+			};
+		};
+	};
+};
diff --git a/src/arm/st-pincfg.h b/src/arm/st-pincfg.h
new file mode 100644
index 000000000000..4851c387d52d
--- /dev/null
+++ b/src/arm/st-pincfg.h
@@ -0,0 +1,71 @@
+#ifndef _ST_PINCFG_H_
+#define _ST_PINCFG_H_
+
+/* Alternate functions */
+#define ALT1	1
+#define ALT2	2
+#define ALT3	3
+#define ALT4	4
+#define ALT5	5
+#define ALT6	6
+#define ALT7	7
+
+/* Output enable */
+#define OE			(1 << 27)
+/* Pull Up */
+#define PU			(1 << 26)
+/* Open Drain */
+#define OD			(1 << 25)
+#define RT			(1 << 23)
+#define INVERTCLK		(1 << 22)
+#define CLKNOTDATA		(1 << 21)
+#define DOUBLE_EDGE		(1 << 20)
+#define CLK_A			(0 << 18)
+#define CLK_B			(1 << 18)
+#define CLK_C			(2 << 18)
+#define CLK_D			(3 << 18)
+
+/* User-frendly defines for Pin Direction */
+		/* oe = 0, pu = 0, od = 0 */
+#define IN			(0)
+		/* oe = 0, pu = 1, od = 0 */
+#define IN_PU			(PU)
+		/* oe = 1, pu = 0, od = 0 */
+#define OUT			(OE)
+		/* oe = 1, pu = 0, od = 1 */
+#define BIDIR			(OE | OD)
+		/* oe = 1, pu = 1, od = 1 */
+#define BIDIR_PU		(OE | PU | OD)
+
+/* RETIME_TYPE */
+/*
+ * B Mode
+ * Bypass retime with optional delay parameter
+ */
+#define BYPASS		(0)
+/*
+ * R0, R1, R0D, R1D modes
+ * single-edge data non inverted clock, retime data with clk
+ */
+#define SE_NICLK_IO	(RT)
+/*
+ * RIV0, RIV1, RIV0D, RIV1D modes
+ * single-edge data inverted clock, retime data with clk
+ */
+#define SE_ICLK_IO	(RT | INVERTCLK)
+/*
+ * R0E, R1E, R0ED, R1ED modes
+ * double-edge data, retime data with clk
+ */
+#define DE_IO		(RT | DOUBLE_EDGE)
+/*
+ * CIV0, CIV1 modes with inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define ICLK		(RT | CLKNOTDATA | INVERTCLK)
+/*
+ * CLK0, CLK1 modes with non-inverted clock
+ * Retiming the clk pins will park clock & reduce the noise within the core.
+ */
+#define NICLK		(RT | CLKNOTDATA)
+#endif /* _ST_PINCFG_H_ */
diff --git a/src/arm/ste-ccu8540-pinctrl.dtsi b/src/arm/ste-ccu8540-pinctrl.dtsi
new file mode 100644
index 000000000000..52dba2e39c71
--- /dev/null
+++ b/src/arm/ste-ccu8540-pinctrl.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2012 ST-Ericsson
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include "ste-nomadik-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl {
+			uart0 {
+				uart0_default_mux: uart0_mux {
+					default_mux {
+						function = "u0";
+						groups = "u0_a_1";
+					};
+				};
+
+				uart0_default_mode: uart0_default {
+					default_cfg1 {
+						pins = "GPIO0", "GPIO2";
+						ste,config = <&in_pu>;
+					};
+
+					default_cfg2 {
+						pins = "GPIO1", "GPIO3";
+						ste,config = <&out_hi>;
+					};
+				};
+
+				uart0_sleep_mode: uart0_sleep {
+					sleep_cfg1 {
+						pins = "GPIO0", "GPIO2";
+						ste,config = <&slpm_in_pu>;
+					};
+
+					sleep_cfg2 {
+						pins = "GPIO1", "GPIO3";
+						ste,config = <&slpm_out_hi>;
+					};
+				};
+			};
+
+			uart2 {
+				uart2_default_mode: uart2_default {
+					default_mux {
+						function = "u2";
+						groups = "u2txrx_a_1";
+					};
+
+					default_cfg1 {
+						pins = "GPIO120";
+						ste,config = <&in_pu>;
+					};
+
+					default_cfg2 {
+						pins = "GPIO121";
+						ste,config = <&out_hi>;
+					};
+				};
+
+				uart2_sleep_mode: uart2_sleep {
+					sleep_cfg1 {
+						pins = "GPIO120";
+						ste,config = <&slpm_in_pu>;
+					};
+
+					sleep_cfg2 {
+						pins = "GPIO121";
+						ste,config = <&slpm_out_hi>;
+					};
+				};
+			};
+
+			i2c0 {
+				i2c0_default_mux: i2c_mux {
+					default_mux {
+						function = "i2c0";
+						groups = "i2c0_a_1";
+					};
+				};
+
+				i2c0_default_mode: i2c_default {
+					default_cfg1 {
+						pins = "GPIO147", "GPIO148";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c0_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						pins = "GPIO147", "GPIO148";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c1 {
+				i2c1_default_mux: i2c_mux {
+					default_mux {
+						function = "i2c1";
+						groups = "i2c1_b_2";
+					};
+				};
+
+				i2c1_default_mode: i2c_default {
+					default_cfg1 {
+						pins = "GPIO16", "GPIO17";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c1_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						pins = "GPIO16", "GPIO17";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c2 {
+				i2c2_default_mux: i2c_mux {
+					default_mux {
+						function = "i2c2";
+						groups = "i2c2_b_2";
+					};
+				};
+
+				i2c2_default_mode: i2c_default {
+					default_cfg1 {
+						pins = "GPIO10", "GPIO11";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c2_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						pins = "GPIO11", "GPIO11";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c4 {
+				i2c4_default_mux: i2c_mux {
+					default_mux {
+						function = "i2c4";
+						groups = "i2c4_b_2";
+					};
+				};
+
+				i2c4_default_mode: i2c_default {
+					default_cfg1 {
+						pins = "GPIO122", "GPIO123";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c4_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						pins = "GPIO122", "GPIO123";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+
+			i2c5 {
+				i2c5_default_mux: i2c_mux {
+					default_mux {
+						function = "i2c5";
+						groups = "i2c5_c_2";
+					};
+				};
+
+				i2c5_default_mode: i2c_default {
+					default_cfg1 {
+						pins = "GPIO118", "GPIO119";
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c5_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						pins = "GPIO118", "GPIO119";
+						ste,config = <&slpm_in_pu>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/ste-ccu8540.dts b/src/arm/ste-ccu8540.dts
new file mode 100644
index 000000000000..32dd55e5f4e6
--- /dev/null
+++ b/src/arm/ste-ccu8540.dts
@@ -0,0 +1,87 @@
+/*
+ * Copyright 2013 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-dbx5x0.dtsi"
+#include "ste-ccu8540-pinctrl.dtsi"
+
+/ {
+	model = "ST-Ericsson U8540 platform with Device Tree";
+	compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
+	};
+
+	soc {
+		pinctrl {
+			compatible = "stericsson,db8540-pinctrl";
+		};
+
+		prcmu@80157000 {
+			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+		};
+
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
+			pinctrl-1 = <&uart0_sleep_mode>;
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart2_default_mode>;
+			pinctrl-1 = <&uart2_sleep_mode>;
+			status = "okay";
+		};
+
+		i2c0: i2c@80004000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
+			pinctrl-1 = <&i2c0_sleep_mode>;
+		};
+
+		i2c1: i2c@80122000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
+			pinctrl-1 = <&i2c1_sleep_mode>;
+		};
+
+		i2c2: i2c@80128000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>;
+			pinctrl-1 = <&i2c2_sleep_mode>;
+		};
+
+		i2c3: i2c@80110000 {
+			status = "disabled";
+		};
+
+		i2c4: i2c@8012a000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>;
+			pinctrl-1 = <&i2c4_sleep_mode>;
+		};
+
+		i2c5: i2c@80001000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>;
+			pinctrl-1 = <&i2c5_sleep_mode>;
+		};
+	};
+};
diff --git a/src/arm/ste-ccu9540.dts b/src/arm/ste-ccu9540.dts
new file mode 100644
index 000000000000..651c56d400a4
--- /dev/null
+++ b/src/arm/ste-ccu9540.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-dbx5x0.dtsi"
+
+/ {
+	model = "ST-Ericsson CCU9540 platform with Device Tree";
+	compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	soc {
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&gpio7 6 0x4>; // 230
+			cd-inverted;
+
+			status = "okay";
+		};
+
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/ste-dbx5x0.dtsi b/src/arm/ste-dbx5x0.dtsi
new file mode 100644
index 000000000000..bfd3f1c734b8
--- /dev/null
+++ b/src/arm/ste-dbx5x0.dtsi
@@ -0,0 +1,1071 @@
+/*
+ * Copyright 2012 Linaro Ltd
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/dbx500-prcmu.h>
+#include <dt-bindings/arm/ux500_pm_domains.h>
+#include "skeleton.dtsi"
+
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "stericsson,db8500";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		intc: interrupt-controller@a0411000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0xa0411000 0x1000>,
+			      <0xa0410100 0x100>;
+		};
+
+		L2: l2-cache {
+			compatible = "arm,pl310-cache";
+			reg = <0xa0412000 0x1000>;
+			interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		pmu {
+			compatible = "arm,cortex-a9-pmu";
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pm_domains: pm_domains0 {
+			compatible = "stericsson,ux500-pm-domains";
+			#power-domain-cells = <1>;
+		};
+
+		clocks {
+			compatible = "stericsson,u8500-clks";
+
+			prcmu_clk: prcmu-clock {
+				#clock-cells = <1>;
+			};
+
+			prcc_pclk: prcc-periph-clock {
+				#clock-cells = <2>;
+			};
+
+			prcc_kclk: prcc-kernel-clock {
+				#clock-cells = <2>;
+			};
+
+			rtc_clk: rtc32k-clock {
+				#clock-cells = <0>;
+			};
+
+			smp_twd_clk: smp-twd-clock {
+				#clock-cells = <0>;
+			};
+		};
+
+		mtu@a03c6000 {
+			/* Nomadik System Timer */
+			compatible = "st,nomadik-mtu";
+			reg = <0xa03c6000 0x1000>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&prcmu_clk PRCMU_TIMCLK>, <&prcc_pclk 6 6>;
+			clock-names = "timclk", "apb_pclk";
+		};
+
+		timer@a0410600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xa0410600 0x20>;
+			interrupts = <1 13 0x304>; /* IRQ level high per-CPU */
+
+			clocks = <&smp_twd_clk>;
+		};
+
+		rtc@80154000 {
+			compatible = "arm,rtc-pl031", "arm,primecell";
+			reg = <0x80154000 0x1000>;
+			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&rtc_clk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio0: gpio@8012e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8012e000 0x80>;
+			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <0>;
+
+			clocks = <&prcc_pclk 1 9>;
+		};
+
+		gpio1: gpio@8012e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8012e080 0x80>;
+			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <1>;
+
+			clocks = <&prcc_pclk 1 9>;
+		};
+
+		gpio2: gpio@8000e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e000 0x80>;
+			interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <2>;
+
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio3: gpio@8000e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e080 0x80>;
+			interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <3>;
+
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio4: gpio@8000e100 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e100 0x80>;
+			interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <4>;
+
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio5: gpio@8000e180 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8000e180 0x80>;
+			interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <5>;
+
+			clocks = <&prcc_pclk 3 8>;
+		};
+
+		gpio6: gpio@8011e000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8011e000 0x80>;
+			interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <6>;
+
+			clocks = <&prcc_pclk 2 11>;
+		};
+
+		gpio7: gpio@8011e080 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0x8011e080 0x80>;
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <7>;
+
+			clocks = <&prcc_pclk 2 11>;
+		};
+
+		gpio8: gpio@a03fe000 {
+			compatible = "stericsson,db8500-gpio",
+				"st,nomadik-gpio";
+			reg =  <0xa03fe000 0x80>;
+			interrupts = <0 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			st,supports-sleepmode;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <8>;
+
+			clocks = <&prcc_pclk 5 1>;
+		};
+
+		pinctrl {
+			compatible = "stericsson,db8500-pinctrl";
+			prcm = <&prcmu>;
+		};
+
+		usb_per5@a03e0000 {
+			compatible = "stericsson,db8500-musb";
+			reg = <0xa03e0000 0x10000>;
+			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+
+			dr_mode = "otg";
+
+			dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+			       <&dma 38 0 0x0>, /* Logical - MemToDev */
+			       <&dma 37 0 0x2>, /* Logical - DevToMem */
+			       <&dma 37 0 0x0>, /* Logical - MemToDev */
+			       <&dma 36 0 0x2>, /* Logical - DevToMem */
+			       <&dma 36 0 0x0>, /* Logical - MemToDev */
+			       <&dma 19 0 0x2>, /* Logical - DevToMem */
+			       <&dma 19 0 0x0>, /* Logical - MemToDev */
+			       <&dma 18 0 0x2>, /* Logical - DevToMem */
+			       <&dma 18 0 0x0>, /* Logical - MemToDev */
+			       <&dma 17 0 0x2>, /* Logical - DevToMem */
+			       <&dma 17 0 0x0>, /* Logical - MemToDev */
+			       <&dma 16 0 0x2>, /* Logical - DevToMem */
+			       <&dma 16 0 0x0>, /* Logical - MemToDev */
+			       <&dma 39 0 0x2>, /* Logical - DevToMem */
+			       <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+			dma-names = "iep_1_9",  "oep_1_9",
+				    "iep_2_10", "oep_2_10",
+				    "iep_3_11", "oep_3_11",
+				    "iep_4_12", "oep_4_12",
+				    "iep_5_13", "oep_5_13",
+				    "iep_6_14", "oep_6_14",
+				    "iep_7_15", "oep_7_15",
+				    "iep_8",    "oep_8";
+
+			clocks = <&prcc_pclk 5 0>;
+		};
+
+		dma: dma-controller@801C0000 {
+			compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+			reg = <0x801C0000 0x1000 0x40010000 0x800>;
+			reg-names = "base", "lcpa";
+			interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+
+			#dma-cells = <3>;
+			memcpy-channels = <56 57 58 59 60>;
+
+			clocks = <&prcmu_clk PRCMU_DMACLK>;
+		};
+
+		prcmu: prcmu@80157000 {
+			compatible = "stericsson,db8500-prcmu";
+			reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+			reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ranges;
+
+			prcmu-timer-4@80157450 {
+				compatible = "stericsson,db8500-prcmu-timer-4";
+				reg = <0x80157450 0xC>;
+			};
+
+			cpufreq {
+				compatible = "stericsson,cpufreq-ux500";
+				clocks = <&prcmu_clk PRCMU_ARMSS>;
+				clock-names = "armss";
+				status = "disabled";
+			};
+
+			thermal@801573c0 {
+				compatible = "stericsson,db8500-thermal";
+				reg = <0x801573c0 0x40>;
+				interrupts = <21 IRQ_TYPE_LEVEL_HIGH>,
+					     <22 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
+				status = "disabled";
+			};
+
+			db8500-prcmu-regulators {
+				compatible = "stericsson,db8500-prcmu-regulator";
+
+				// DB8500_REGULATOR_VAPE
+				db8500_vape_reg: db8500_vape {
+					regulator-compatible = "db8500_vape";
+					regulator-always-on;
+				};
+
+				// DB8500_REGULATOR_VARM
+				db8500_varm_reg: db8500_varm {
+					regulator-compatible = "db8500_varm";
+				};
+
+				// DB8500_REGULATOR_VMODEM
+				db8500_vmodem_reg: db8500_vmodem {
+					regulator-compatible = "db8500_vmodem";
+				};
+
+				// DB8500_REGULATOR_VPLL
+				db8500_vpll_reg: db8500_vpll {
+					regulator-compatible = "db8500_vpll";
+				};
+
+				// DB8500_REGULATOR_VSMPS1
+				db8500_vsmps1_reg: db8500_vsmps1 {
+					regulator-compatible = "db8500_vsmps1";
+				};
+
+				// DB8500_REGULATOR_VSMPS2
+				db8500_vsmps2_reg: db8500_vsmps2 {
+					regulator-compatible = "db8500_vsmps2";
+				};
+
+				// DB8500_REGULATOR_VSMPS3
+				db8500_vsmps3_reg: db8500_vsmps3 {
+					regulator-compatible = "db8500_vsmps3";
+				};
+
+				// DB8500_REGULATOR_VRF1
+				db8500_vrf1_reg: db8500_vrf1 {
+					regulator-compatible = "db8500_vrf1";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSP
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+					regulator-compatible = "db8500_sva_mmdsp";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+					regulator-compatible = "db8500_sva_mmdsp_ret";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SVAPIPE
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+					regulator-compatible = "db8500_sva_pipe";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSP
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+					regulator-compatible = "db8500_sia_mmdsp";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+				};
+
+				// DB8500_REGULATOR_SWITCH_SIAPIPE
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+					regulator-compatible = "db8500_sia_pipe";
+				};
+
+				// DB8500_REGULATOR_SWITCH_SGA
+				db8500_sga_reg: db8500_sga {
+					regulator-compatible = "db8500_sga";
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					regulator-compatible = "db8500_b2r2_mcde";
+					vin-supply = <&db8500_vape_reg>;
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12
+				db8500_esram12_reg: db8500_esram12 {
+					regulator-compatible = "db8500_esram12";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM12RET
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+					regulator-compatible = "db8500_esram12_ret";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34
+				db8500_esram34_reg: db8500_esram34 {
+					regulator-compatible = "db8500_esram34";
+				};
+
+				// DB8500_REGULATOR_SWITCH_ESRAM34RET
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+					regulator-compatible = "db8500_esram34_ret";
+				};
+			};
+
+			ab8500 {
+				compatible = "stericsson,ab8500";
+				interrupt-parent = <&intc>;
+				interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				ab8500_gpio: ab8500-gpio {
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				ab8500-rtc {
+					compatible = "stericsson,ab8500-rtc";
+					interrupts = <17 IRQ_TYPE_LEVEL_HIGH
+						      18 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "60S", "ALARM";
+				};
+
+				ab8500-gpadc {
+					compatible = "stericsson,ab8500-gpadc";
+					interrupts = <32 IRQ_TYPE_LEVEL_HIGH
+						      39 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "HW_CONV_END", "SW_CONV_END";
+					vddadc-supply = <&ab8500_ldo_tvout_reg>;
+				};
+
+				ab8500_battery: ab8500_battery {
+					stericsson,battery-type = "LIPO";
+					thermistor-on-batctrl;
+				};
+
+				ab8500_fg {
+					compatible = "stericsson,ab8500-fg";
+					battery	   = <&ab8500_battery>;
+				};
+
+				ab8500_btemp {
+					compatible = "stericsson,ab8500-btemp";
+					battery	   = <&ab8500_battery>;
+				};
+
+				ab8500_charger {
+					compatible	= "stericsson,ab8500-charger";
+					battery		= <&ab8500_battery>;
+					vddadc-supply	= <&ab8500_ldo_tvout_reg>;
+				};
+
+				ab8500_chargalg {
+					compatible	= "stericsson,ab8500-chargalg";
+					battery		= <&ab8500_battery>;
+				};
+
+				ab8500_usb {
+					compatible = "stericsson,ab8500-usb";
+					interrupts = < 90 IRQ_TYPE_LEVEL_HIGH
+						       96 IRQ_TYPE_LEVEL_HIGH
+						       14 IRQ_TYPE_LEVEL_HIGH
+						       15 IRQ_TYPE_LEVEL_HIGH
+						       79 IRQ_TYPE_LEVEL_HIGH
+						       74 IRQ_TYPE_LEVEL_HIGH
+						       75 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ID_WAKEUP_R",
+							  "ID_WAKEUP_F",
+							  "VBUS_DET_F",
+							  "VBUS_DET_R",
+							  "USB_LINK_STATUS",
+							  "USB_ADP_PROBE_PLUG",
+							  "USB_ADP_PROBE_UNPLUG";
+					vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
+					v-ape-supply = <&db8500_vape_reg>;
+					musb_1v8-supply = <&db8500_vsmps2_reg>;
+				};
+
+				ab8500-ponkey {
+					compatible = "stericsson,ab8500-poweron-key";
+					interrupts = <6 IRQ_TYPE_LEVEL_HIGH
+						      7 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+				};
+
+				ab8500-sysctrl {
+					compatible = "stericsson,ab8500-sysctrl";
+				};
+
+				ab8500-pwm {
+					compatible = "stericsson,ab8500-pwm";
+				};
+
+				ab8500-debugfs {
+					compatible = "stericsson,ab8500-debug";
+				};
+
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					V-AUD-supply = <&ab8500_ldo_audio_reg>;
+					V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
+				ext_regulators: ab8500-ext-regulators {
+					compatible = "stericsson,ab8500-ext-regulator";
+
+					ab8500_ext1_reg: ab8500_ext1 {
+						regulator-compatible = "ab8500_ext1";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-boot-on;
+						regulator-always-on;
+					};
+
+					ab8500_ext2_reg: ab8500_ext2 {
+						regulator-compatible = "ab8500_ext2";
+						regulator-min-microvolt = <1360000>;
+						regulator-max-microvolt = <1360000>;
+						regulator-boot-on;
+						regulator-always-on;
+					};
+
+					ab8500_ext3_reg: ab8500_ext3 {
+						regulator-compatible = "ab8500_ext3";
+						regulator-min-microvolt = <3400000>;
+						regulator-max-microvolt = <3400000>;
+						regulator-boot-on;
+					};
+				};
+
+				ab8500-regulators {
+					compatible = "stericsson,ab8500-regulator";
+					vin-supply = <&ab8500_ext3_reg>;
+
+					// supplies to the display/camera
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-compatible = "ab8500_ldo_aux1";
+						regulator-min-microvolt = <2500000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-boot-on;
+						/* BUG: If turned off MMC will be affected. */
+						regulator-always-on;
+					};
+
+					// supplies to the on-board eMMC
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-compatible = "ab8500_ldo_aux2";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for VAUX3; SDcard slots
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-compatible = "ab8500_ldo_aux3";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					// supply for v-intcore12; VINTCORE12 LDO
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-compatible = "ab8500_ldo_intcore";
+					};
+
+					// supply for tvout; gpadc; TVOUT LDO
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-compatible = "ab8500_ldo_tvout";
+					};
+
+					// supply for ab8500-usb; USB LDO
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-compatible = "ab8500_ldo_usb";
+					};
+
+					// supply for ab8500-vaudio; VAUDIO LDO
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-compatible = "ab8500_ldo_audio";
+					};
+
+					// supply for v-anamic1 VAMIC1 LDO
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-compatible = "ab8500_ldo_anamic1";
+					};
+
+					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-compatible = "ab8500_ldo_anamic2";
+					};
+
+					// supply for v-dmic; VDMIC LDO
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-compatible = "ab8500_ldo_dmic";
+					};
+
+					// supply for U8500 CSI/DSI; VANA LDO
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-compatible = "ab8500_ldo_ana";
+					};
+				};
+			};
+		};
+
+		i2c@80004000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80004000 0x1000>;
+			interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+			clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		i2c@80122000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80122000 0x1000>;
+			interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		i2c@80128000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80128000 0x1000>;
+			interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		i2c@80110000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x80110000 0x1000>;
+			interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		i2c@8012a000 {
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+			reg = <0x8012a000 0x1000>;
+			interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
+
+			clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
+			clock-names = "i2cclk", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		ssp@80002000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80002000 0x1000>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
+			       <&dma 8 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		ssp@80003000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80003000 0x1000>;
+			interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
+			       <&dma 9 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		spi@8011a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x8011a000 0x1000>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
+			       <&dma 0 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		spi@80112000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80112000 0x1000>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
+			       <&dma 35 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		spi@80111000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80111000 0x1000>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
+			       <&dma 33 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		spi@80129000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x80129000 0x1000>;
+			interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Same clock wired to kernel and pclk */
+			clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
+			       <&dma 40 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+		};
+
+		uart@80120000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80120000 0x1000>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
+			       <&dma 13 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 0>, <&prcc_pclk 1 0>;
+			clock-names = "uart", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		uart@80121000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80121000 0x1000>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 12 0 0x2>, /* Logical - DevToMem */
+			       <&dma 12 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 1>, <&prcc_pclk 1 1>;
+			clock-names = "uart", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		uart@80007000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x80007000 0x1000>;
+			interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 11 0 0x2>, /* Logical - DevToMem */
+			       <&dma 11 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 3 6>, <&prcc_pclk 3 6>;
+			clock-names = "uart", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		sdi0_per1@80126000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80126000 0x1000>;
+			interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 29 0 0x2>, /* Logical - DevToMem */
+			       <&dma 29 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi1_per2@80118000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80118000 0x1000>;
+			interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 32 0 0x2>, /* Logical - DevToMem */
+			       <&dma 32 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi2_per3@80005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80005000 0x1000>;
+			interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 28 0 0x2>, /* Logical - DevToMem */
+			       <&dma 28 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi3_per2@80119000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80119000 0x1000>;
+			interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */
+			       <&dma 41 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi4_per2@80114000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80114000 0x1000>;
+			interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 42 0 0x2>, /* Logical - DevToMem */
+			       <&dma 42 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		sdi5_per3@80008000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x80008000 0x1000>;
+			interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+
+			dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */
+			       <&dma 43 0 0x0>; /* Logical - MemToDev */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
+			clock-names = "sdi", "apb_pclk";
+			power-domains = <&pm_domains DOMAIN_VAPE>;
+
+			status = "disabled";
+		};
+
+		msp0: msp@80123000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80123000 0x1000>;
+			interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */
+			       <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		msp1: msp@80124000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80124000 0x1000>;
+			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			/* This DMA channel only exist on DB8500 v1 */
+			dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */
+			dma-names = "tx";
+
+			clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		// HDMI sound
+		msp2: msp@80117000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80117000 0x1000>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			dmas = <&dma 14 0 0x12>, /* Logical  - DevToMem - HighPrio */
+			       <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev
+                                                    HighPrio - Fixed */
+			dma-names = "rx", "tx";
+
+			clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		msp3: msp@80125000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80125000 0x1000>;
+			interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
+			v-ape-supply = <&db8500_vape_reg>;
+
+			/* This DMA channel only exist on DB8500 v2 */
+			dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */
+			dma-names = "rx";
+
+			clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>;
+			clock-names = "msp", "apb_pclk";
+
+			status = "disabled";
+		};
+
+		external-bus@50000000 {
+			compatible = "simple-bus";
+			reg = <0x50000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000000>;
+			status = "disabled";
+		};
+
+		cpufreq-cooling {
+			compatible = "stericsson,db8500-cpufreq-cooling";
+			status = "disabled";
+		};
+
+		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			startup-delay-us = <100>;
+			enable-active-high;
+
+			states = <1800000 0x1
+				  2900000 0x0>;
+
+			status = "disabled";
+		};
+
+		mcde@a0350000 {
+			compatible = "stericsson,mcde";
+			reg = <0xa0350000 0x1000>, /* MCDE */
+			      <0xa0351000 0x1000>, /* DSI link 1 */
+			      <0xa0352000 0x1000>, /* DSI link 2 */
+			      <0xa0353000 0x1000>; /* DSI link 3 */
+			interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */
+				 <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */
+				 <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */
+				 <&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */
+				 <&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */
+				 <&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */
+				 <&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */
+				 <&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */
+		};
+
+		cryp@a03cb000 {
+			compatible = "stericsson,ux500-cryp";
+			reg = <0xa03cb000 0x1000>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 1>;
+		};
+
+		hash@a03c2000 {
+			compatible = "stericsson,ux500-hash";
+			reg = <0xa03c2000 0x1000>;
+
+			v-ape-supply = <&db8500_vape_reg>;
+			clocks = <&prcc_pclk 6 2>;
+		};
+	};
+};
diff --git a/src/arm/ste-href-ab8500.dtsi b/src/arm/ste-href-ab8500.dtsi
new file mode 100644
index 000000000000..9b69bce9297d
--- /dev/null
+++ b/src/arm/ste-href-ab8500.dtsi
@@ -0,0 +1,428 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8500 {
+				ab8500-gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio4_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio12_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio16_default_mode>,
+						    <&gpio24_default_mode>,
+						    <&gpio25_default_mode>,
+						    <&gpio36_default_mode>,
+						    <&gpio37_default_mode>,
+						    <&gpio38_default_mode>,
+						    <&gpio39_default_mode>,
+						    <&gpio42_default_mode>,
+						    <&gpio26_default_mode>,
+						    <&gpio35_default_mode>,
+						    <&ycbcr_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi1_default_mode>,
+						    <&usbuicc_default_mode>,
+						    <&dmic_default_mode>,
+						    <&extcpena_default_mode>,
+						    <&modsclsda_default_mode>;
+
+					/*
+					 * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio2_a_1";
+							};
+							default_cfg {
+								pins = "GPIO2_T9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio4 {
+						gpio4_default_mode: gpio4_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio4_a_1";
+							};
+							default_cfg {
+								pins = "GPIO4_W2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio10_d_1";
+							};
+							default_cfg {
+								pins = "GPIO10_U17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio11_d_1";
+							};
+							default_cfg {
+								pins = "GPIO11_AA18";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio12 {
+						gpio12_default_mode: gpio12_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio12_d_1";
+							};
+							default_cfg {
+								pins = "GPIO12_U16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio13_d_1";
+							};
+							default_cfg {
+								pins = "GPIO13_W17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio16 {
+						gpio16_default_mode: gpio16_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio16_a_1";
+							};
+							default_cfg {
+								pins = "GPIO16_F15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio24 {
+						gpio24_default_mode: gpio24_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio24_a_1";
+							};
+							default_cfg {
+								pins = "GPIO24_T14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio25 {
+						gpio25_default_mode: gpio25_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio25_a_1";
+							};
+							default_cfg {
+								pins = "GPIO25_R16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio36 {
+						gpio36_default_mode: gpio36_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio36_a_1";
+							};
+							default_cfg {
+								pins = "GPIO36_A17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio37 {
+						gpio37_default_mode: gpio37_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio37_a_1";
+							};
+							default_cfg {
+								pins = "GPIO37_E15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio38 {
+						gpio38_default_mode: gpio38_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio38_a_1";
+							};
+							default_cfg {
+								pins = "GPIO38_C17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio39 {
+						gpio39_default_mode: gpio39_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio39_a_1";
+							};
+							default_cfg {
+								pins = "GPIO39_E16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio42 {
+						gpio42_default_mode: gpio42_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio42_a_1";
+							};
+							default_cfg {
+								pins = "GPIO42_U2";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW
+					 */
+					gpio26 {
+						gpio26_default_mode: gpio26_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio26_d_1";
+							};
+							default_cfg {
+								pins = "GPIO26_M16";
+								output-low;
+							};
+						};
+					};
+					gpio35 {
+						gpio35_default_mode: gpio35_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio35_d_1";
+							};
+							default_cfg {
+								pins = "GPIO35_W15";
+								output-low;
+							};
+						};
+					};
+					/*
+					 * This sets up the YCBCR connector pins, i.e. analog video out.
+					 * Set as input with no bias.
+					 */
+					ycbcr {
+						ycbcr_default_mode: ycbcr_default {
+							default_mux {
+								function = "ycbcr";
+								groups = "ycbcr0123_d_1";
+							};
+							default_cfg {
+								pins = "GPIO6_Y18",
+									 "GPIO7_AA20",
+									 "GPIO8_W18",
+									 "GPIO9_AA19";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pins 14 and 15 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								function = "pwmout";
+								groups = "pwmout1_d_1", "pwmout2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO14_F14",
+									 "GPIO15_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 1 */
+					adi1 {
+						adi1_default_mode: adi1_default {
+							default_mux {
+								function = "adi1";
+								groups = "adi1_d_1";
+							};
+							default_cfg {
+								pins = "GPIO17_P5",
+									 "GPIO18_R5",
+									 "GPIO19_U5",
+									 "GPIO20_T5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the USB UICC pins */
+					usbuicc {
+						usbuicc_default_mode: usbuicc_default {
+							default_mux {
+								function = "usbuicc";
+								groups = "usbuicc_d_1";
+							};
+							default_cfg {
+								pins = "GPIO21_H19",
+									 "GPIO22_G20",
+									 "GPIO23_G19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up the microphone pins */
+					dmic {
+						dmic_default_mode: dmic_default {
+							default_mux {
+								function = "dmic";
+								groups = "dmic12_d_1",
+									 "dmic34_d_1",
+									 "dmic56_d_1";
+							};
+							default_cfg {
+								pins = "GPIO27_J6",
+									 "GPIO28_K6",
+									 "GPIO29_G6",
+									 "GPIO30_H6",
+									 "GPIO31_F5",
+									 "GPIO32_G5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					extcpena {
+						extcpena_default_mode: extcpena_default {
+							default_mux {
+								function = "extcpena";
+								groups = "extcpena_d_1";
+							};
+							default_cfg {
+								pins = "GPIO34_R17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								function = "modsclsda";
+								groups = "modsclsda_d_1";
+							};
+							default_cfg {
+								pins = "GPIO40_T19",
+									"GPIO41_U19";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio1_a_1";
+							};
+							default_cfg {
+								pins = "GPIO1_T10";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio3_a_1";
+							};
+							default_cfg {
+								pins = "GPIO3_U9";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/ste-href-ab8505.dtsi b/src/arm/ste-href-ab8505.dtsi
new file mode 100644
index 000000000000..ccf37a9df050
--- /dev/null
+++ b/src/arm/ste-href-ab8505.dtsi
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc {
+		prcmu@80157000 {
+			ab8505 {
+				ab8505-gpio {
+					/* Hog a few default settings */
+					pinctrl-names = "default";
+					pinctrl-0 = <&gpio2_default_mode>,
+						    <&gpio10_default_mode>,
+						    <&gpio11_default_mode>,
+						    <&gpio13_default_mode>,
+						    <&gpio34_default_mode>,
+						    <&gpio50_default_mode>,
+						    <&pwm_default_mode>,
+						    <&adi2_default_mode>,
+						    <&modsclsda_default_mode>,
+						    <&resethw_default_mode>,
+						    <&service_default_mode>;
+
+					/*
+					 * Pins 2, 10, 11, 13, 34 and 50
+					 * are muxed in as GPIO, and configured as INPUT PULL DOWN
+					 */
+					gpio2 {
+						gpio2_default_mode: gpio2_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio2_a_1";
+							};
+							default_cfg {
+								pins = "GPIO2_R5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio10 {
+						gpio10_default_mode: gpio10_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio10_d_1";
+							};
+							default_cfg {
+								pins = "GPIO10_B16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio11 {
+						gpio11_default_mode: gpio11_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio11_d_1";
+							};
+							default_cfg {
+								pins = "GPIO11_B17";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio13 {
+						gpio13_default_mode: gpio13_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio13_d_1";
+							};
+							default_cfg {
+								pins = "GPIO13_D17";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					gpio34 {
+						gpio34_default_mode: gpio34_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio34_a_1";
+							};
+							default_cfg {
+								pins = "GPIO34_H14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					gpio50 {
+						gpio50_default_mode: gpio50_default {
+							default_mux {
+								function = "gpio";
+								groups = "gpio50_d_1";
+							};
+							default_cfg {
+								pins = "GPIO50_L4";
+								input-enable;
+								bias-disable;
+							};
+						};
+					};
+					/* This sets up the PWM pin 14 */
+					pwm {
+						pwm_default_mode: pwm_default {
+							default_mux {
+								function = "pwmout";
+								groups = "pwmout1_d_1";
+							};
+							default_cfg {
+								pins = "GPIO14_C16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* This sets up audio interface 2 */
+					adi2 {
+						adi2_default_mode: adi2_default {
+							default_mux {
+								function = "adi2";
+								groups = "adi2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO17_P2",
+									 "GPIO18_N3",
+									 "GPIO19_T1",
+									 "GPIO20_P3";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/* Modem I2C setup (SCL and SDA pins) */
+					modsclsda {
+						modsclsda_default_mode: modsclsda_default {
+							default_mux {
+								function = "modsclsda";
+								groups = "modsclsda_d_1";
+							};
+							default_cfg {
+								pins = "GPIO40_J15",
+									"GPIO41_J14";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					resethw {
+						resethw_default_mode: resethw_default {
+							default_mux {
+								function = "resethw";
+								groups = "resethw_d_1";
+							};
+							default_cfg {
+								pins = "GPIO52_D16";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					service {
+						service_default_mode: service_default {
+							default_mux {
+								function = "service";
+								groups = "service_d_1";
+							};
+							default_cfg {
+								pins = "GPIO53_D15";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					/*
+					 * Clock output pins associated with regulators.
+					 */
+					sysclkreq2 {
+						sysclkreq2_default_mode: sysclkreq2_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq2_d_1";
+							};
+							default_cfg {
+								pins = "GPIO1_N4";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq2_sleep_mode: sysclkreq2_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio1_a_1";
+							};
+							default_cfg {
+								pins = "GPIO1_N4";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+					sysclkreq4 {
+						sysclkreq4_default_mode: sysclkreq4_default {
+							default_mux {
+								function = "sysclkreq";
+								groups = "sysclkreq4_d_1";
+							};
+							default_cfg {
+								pins = "GPIO3_P5";
+								input-enable;
+								bias-disable;
+							};
+						};
+						sysclkreq4_sleep_mode: sysclkreq4_sleep {
+							default_mux {
+								function = "gpio";
+								groups = "gpio3_a_1";
+							};
+							default_cfg {
+								pins = "GPIO3_P5";
+								input-enable;
+								bias-pull-down;
+							};
+						};
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/ste-href-family-pinctrl.dtsi b/src/arm/ste-href-family-pinctrl.dtsi
new file mode 100644
index 000000000000..5c5cea232743
--- /dev/null
+++ b/src/arm/ste-href-family-pinctrl.dtsi
@@ -0,0 +1,745 @@
+/*
+ * Copyright 2013 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "ste-nomadik-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl {
+			/* Settings for all UART default and sleep states */
+			uart0 {
+				uart0_default_mode: uart0_default {
+					default_mux {
+						function = "u0";
+						groups = "u0_a_1";
+					};
+					default_cfg1 {
+						pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+						ste,config = <&in_pu>;
+					};
+
+					default_cfg2 {
+						pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */
+						ste,config = <&out_hi>;
+					};
+				};
+
+				uart0_sleep_mode: uart0_sleep {
+					sleep_cfg1 {
+						pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+
+					sleep_cfg2 {
+						pins = "GPIO1_AJ3"; /* RTS */
+						ste,config = <&slpm_out_hi_wkup_pdis>;
+					};
+
+					sleep_cfg3 {
+						pins = "GPIO3_AH3"; /* TXD */
+						ste,config = <&slpm_out_wkup_pdis>;
+					};
+				};
+			};
+
+			uart1 {
+				uart1_default_mode: uart1_default {
+					default_mux {
+						function = "u1";
+						groups = "u1rxtx_a_1";
+					};
+					default_cfg1 {
+						pins = "GPIO4_AH6"; /* RXD */
+						ste,config = <&in_pu>;
+					};
+
+					default_cfg2 {
+						pins = "GPIO5_AG6"; /* TXD */
+						ste,config = <&out_hi>;
+					};
+				};
+
+				uart1_sleep_mode: uart1_sleep {
+					sleep_cfg1 {
+						pins = "GPIO4_AH6"; /* RXD */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+
+					sleep_cfg2 {
+						pins = "GPIO5_AG6"; /* TXD */
+						ste,config = <&slpm_out_wkup_pdis>;
+					};
+				};
+			};
+
+			uart2 {
+				uart2_default_mode: uart2_default {
+					default_mux {
+						function = "u2";
+						groups = "u2rxtx_c_1";
+					};
+					default_cfg1 {
+						pins = "GPIO29_W2"; /* RXD */
+						ste,config = <&in_pu>;
+					};
+
+					default_cfg2 {
+						pins = "GPIO30_W3"; /* TXD */
+						ste,config = <&out_hi>;
+					};
+				};
+
+				uart2_sleep_mode: uart2_sleep {
+					sleep_cfg1 {
+						pins = "GPIO29_W2"; /* RXD */
+						ste,config = <&in_wkup_pdis>;
+					};
+
+					sleep_cfg2 {
+						pins = "GPIO30_W3"; /* TXD */
+						ste,config = <&out_wkup_pdis>;
+					};
+				};
+			};
+
+			/* Settings for all I2C default and sleep states */
+			i2c0 {
+				i2c0_default_mode: i2c_default {
+					default_mux {
+						function = "i2c0";
+						groups = "i2c0_a_1";
+					};
+					default_cfg1 {
+						pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c0_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			i2c1 {
+				i2c1_default_mode: i2c_default {
+					default_mux {
+						function = "i2c1";
+						groups = "i2c1_b_2";
+					};
+					default_cfg1 {
+						pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c1_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			i2c2 {
+				i2c2_default_mode: i2c_default {
+					default_mux {
+						function = "i2c2";
+						groups = "i2c2_b_2";
+					};
+					default_cfg1 {
+						pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c2_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			i2c3 {
+				i2c3_default_mode: i2c_default {
+					default_mux {
+						function = "i2c3";
+						groups = "i2c3_c_2";
+					};
+					default_cfg1 {
+						pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c3_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			/*
+			 * Activating I2C4 will conflict with UART1 about the same pins so do not
+			 * enable I2C4 and UART1 at the same time.
+			 */
+			i2c4 {
+				i2c4_default_mode: i2c_default {
+					default_mux {
+						function = "i2c4";
+						groups = "i2c4_b_1";
+					};
+					default_cfg1 {
+						pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				i2c4_sleep_mode: i2c_sleep {
+					sleep_cfg1 {
+						pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			/* Settings for all SPI default and sleep states */
+			spi2 {
+				spi2_default_mode: spi_default {
+					default_mux {
+						function = "spi2";
+						groups = "spi2_oc1_2";
+					};
+					default_cfg1 {
+						pins = "GPIO216_AG12"; /* FRM */
+						ste,config = <&gpio_out_hi>;
+					};
+					default_cfg2 {
+						pins = "GPIO218_AH11"; /* RXD */
+						ste,config = <&in_pd>;
+					};
+					default_cfg3 {
+						pins =
+						"GPIO215_AH13", /* TXD */
+						"GPIO217_AH12"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+				};
+
+				spi2_idle_mode: spi_idle {
+					/*
+					 * The idle mode is basically sleep mode sans wakeups. Also
+					 * note that we have muxes the pins off the function here
+					 * as we do not state any muxing.
+					 */
+					idle_cfg1 {
+						pins = "GPIO218_AH11"; /* RXD */
+						ste,config = <&slpm_in_pdis>;
+					};
+					idle_cfg2 {
+						pins = "GPIO215_AH13"; /* TXD */
+						ste,config = <&slpm_out_lo_pdis>;
+					};
+					idle_cfg3 {
+						pins = "GPIO217_AH12"; /* CLK */
+						ste,config = <&slpm_pdis>;
+					};
+				};
+
+				spi2_sleep_mode: spi_sleep {
+					sleep_cfg1 {
+						pins =
+						"GPIO216_AG12", /* FRM */
+						"GPIO218_AH11"; /* RXD */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+					sleep_cfg2 {
+						pins = "GPIO215_AH13"; /* TXD */
+						ste,config = <&slpm_out_lo_wkup_pdis>;
+					};
+					sleep_cfg3 {
+						pins = "GPIO217_AH12"; /* CLK */
+						ste,config = <&slpm_wkup_pdis>;
+					};
+				};
+			};
+
+			/* Settings for all MMC/SD/SDIO default and sleep states */
+			sdi0 {
+				/* This is the external SD card slot, 4 bits wide */
+				sdi0_default_mode: sdi0_default {
+					default_mux {
+						function = "mc0";
+						groups = "mc0_a_1";
+					};
+					default_cfg1 {
+						pins =
+						"GPIO18_AC2", /* CMDDIR */
+						"GPIO19_AC1", /* DAT0DIR */
+						"GPIO20_AB4"; /* DAT2DIR */
+						ste,config = <&out_hi>;
+					};
+					default_cfg2 {
+						pins = "GPIO22_AA3"; /* FBCLK */
+						ste,config = <&in_nopull>;
+					};
+					default_cfg3 {
+						pins = "GPIO23_AA4"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+					default_cfg4 {
+						pins =
+						"GPIO24_AB2", /* CMD */
+						"GPIO25_Y4", /* DAT0 */
+						"GPIO26_Y2", /* DAT1 */
+						"GPIO27_AA2", /* DAT2 */
+						"GPIO28_AA1"; /* DAT3 */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				sdi0_sleep_mode: sdi0_sleep {
+					sleep_cfg1 {
+						pins =
+						"GPIO18_AC2", /* CMDDIR */
+						"GPIO19_AC1", /* DAT0DIR */
+						"GPIO20_AB4"; /* DAT2DIR */
+						ste,config = <&slpm_out_hi_wkup_pdis>;
+					};
+					sleep_cfg2 {
+						pins =
+						"GPIO22_AA3", /* FBCLK */
+						"GPIO24_AB2", /* CMD */
+						"GPIO25_Y4", /* DAT0 */
+						"GPIO26_Y2", /* DAT1 */
+						"GPIO27_AA2", /* DAT2 */
+						"GPIO28_AA1"; /* DAT3 */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+					sleep_cfg3 {
+						pins = "GPIO23_AA4"; /* CLK */
+						ste,config = <&slpm_out_lo_wkup_pdis>;
+					};
+				};
+			};
+
+			sdi1 {
+				/* This is the WLAN SDIO 4 bits wide */
+				sdi1_default_mode: sdi1_default {
+					default_mux {
+						function = "mc1";
+						groups = "mc1_a_1";
+					};
+					default_cfg1 {
+						pins = "GPIO208_AH16"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+					default_cfg2 {
+						pins = "GPIO209_AG15"; /* FBCLK */
+						ste,config = <&in_nopull>;
+					};
+					default_cfg3 {
+						pins =
+						"GPIO210_AJ15", /* CMD */
+						"GPIO211_AG14", /* DAT0 */
+						"GPIO212_AF13", /* DAT1 */
+						"GPIO213_AG13", /* DAT2 */
+						"GPIO214_AH15"; /* DAT3 */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				sdi1_sleep_mode: sdi1_sleep {
+					sleep_cfg1 {
+						pins = "GPIO208_AH16"; /* CLK */
+						ste,config = <&slpm_out_lo_wkup_pdis>;
+					};
+					sleep_cfg2 {
+						pins =
+						"GPIO209_AG15", /* FBCLK */
+						"GPIO210_AJ15", /* CMD */
+						"GPIO211_AG14", /* DAT0 */
+						"GPIO212_AF13", /* DAT1 */
+						"GPIO213_AG13", /* DAT2 */
+						"GPIO214_AH15"; /* DAT3 */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			sdi2 {
+				/* This is the eMMC 8 bits wide, usually PoP eMMC */
+				sdi2_default_mode: sdi2_default {
+					default_mux {
+						function = "mc2";
+						groups = "mc2_a_1";
+					};
+					default_cfg1 {
+						pins = "GPIO128_A5"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+					default_cfg2 {
+						pins = "GPIO130_C8"; /* FBCLK */
+						ste,config = <&in_nopull>;
+					};
+					default_cfg3 {
+						pins =
+						"GPIO129_B4", /* CMD */
+						"GPIO131_A12", /* DAT0 */
+						"GPIO132_C10", /* DAT1 */
+						"GPIO133_B10", /* DAT2 */
+						"GPIO134_B9", /* DAT3 */
+						"GPIO135_A9", /* DAT4 */
+						"GPIO136_C7", /* DAT5 */
+						"GPIO137_A7", /* DAT6 */
+						"GPIO138_C5"; /* DAT7 */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				sdi2_sleep_mode: sdi2_sleep {
+					sleep_cfg1 {
+						pins = "GPIO128_A5"; /* CLK */
+						ste,config = <&out_lo_wkup_pdis>;
+					};
+					sleep_cfg2 {
+						pins =
+						"GPIO130_C8", /* FBCLK */
+						"GPIO129_B4"; /* CMD */
+						ste,config = <&in_wkup_pdis_en>;
+					};
+					sleep_cfg3 {
+						pins =
+						"GPIO131_A12", /* DAT0 */
+						"GPIO132_C10", /* DAT1 */
+						"GPIO133_B10", /* DAT2 */
+						"GPIO134_B9", /* DAT3 */
+						"GPIO135_A9", /* DAT4 */
+						"GPIO136_C7", /* DAT5 */
+						"GPIO137_A7", /* DAT6 */
+						"GPIO138_C5"; /* DAT7 */
+						ste,config = <&in_wkup_pdis>;
+					};
+				};
+			};
+
+			sdi4 {
+				/* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */
+				sdi4_default_mode: sdi4_default {
+					default_mux {
+						function = "mc4";
+						groups = "mc4_a_1";
+					};
+					default_cfg1 {
+						pins = "GPIO203_AE23"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+					default_cfg2 {
+						pins = "GPIO202_AF25"; /* FBCLK */
+						ste,config = <&in_nopull>;
+					};
+					default_cfg3 {
+						pins =
+						"GPIO201_AF24", /* CMD */
+						"GPIO200_AH26", /* DAT0 */
+						"GPIO199_AH23", /* DAT1 */
+						"GPIO198_AG25", /* DAT2 */
+						"GPIO197_AH24", /* DAT3 */
+						"GPIO207_AJ23", /* DAT4 */
+						"GPIO206_AG24", /* DAT5 */
+						"GPIO205_AG23", /* DAT6 */
+						"GPIO204_AF23"; /* DAT7 */
+						ste,config = <&in_pu>;
+					};
+				};
+
+				sdi4_sleep_mode: sdi4_sleep {
+					sleep_cfg1 {
+						pins = "GPIO203_AE23"; /* CLK */
+						ste,config = <&out_lo_wkup_pdis>;
+					};
+					sleep_cfg2 {
+						pins =
+						"GPIO202_AF25", /* FBCLK */
+						"GPIO201_AF24", /* CMD */
+						"GPIO200_AH26", /* DAT0 */
+						"GPIO199_AH23", /* DAT1 */
+						"GPIO198_AG25", /* DAT2 */
+						"GPIO197_AH24", /* DAT3 */
+						"GPIO207_AJ23", /* DAT4 */
+						"GPIO206_AG24", /* DAT5 */
+						"GPIO205_AG23", /* DAT6 */
+						"GPIO204_AF23"; /* DAT7 */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			/*
+			 * Multi-rate serial ports (MSPs) - MSP3 output is internal and
+			 * cannot be muxed onto any pins.
+			 */
+			msp0 {
+				msp0_default_mode: msp0_default {
+					default_msp0_mux {
+						function = "msp0";
+						groups = "msp0txrx_a_1", "msp0tfstck_a_1";
+					};
+					default_msp0_cfg {
+						pins =
+						"GPIO12_AC4", /* TXD */
+						"GPIO15_AC3", /* RXD */
+						"GPIO13_AF3", /* TFS */
+						"GPIO14_AE3"; /* TCK */
+						ste,config = <&in_nopull>;
+					};
+				};
+			};
+
+			msp1 {
+				msp1_default_mode: msp1_default {
+					default_mux {
+						function = "msp1";
+						groups = "msp1txrx_a_1", "msp1_a_1";
+					};
+					default_cfg1 {
+						pins = "GPIO33_AF2";
+						ste,config = <&out_lo>;
+					};
+					default_cfg2 {
+						pins =
+						"GPIO34_AE1",
+						"GPIO35_AE2",
+						"GPIO36_AG2";
+						ste,config = <&in_nopull>;
+					};
+
+				};
+			};
+
+			msp2 {
+				msp2_default_mode: msp2_default {
+					/* MSP2 usually used for HDMI audio */
+					default_mux {
+						function = "msp2";
+						groups = "msp2_a_1";
+					};
+					default_cfg1 {
+						pins =
+						"GPIO193_AH27", /* TXD */
+						"GPIO194_AF27", /* TCK */
+						"GPIO195_AG28"; /* TFS */
+						ste,config = <&in_pd>;
+					};
+					default_cfg2 {
+						pins = "GPIO196_AG26"; /* RXD */
+						ste,config = <&out_lo>;
+					};
+				};
+			};
+
+
+			musb {
+				musb_default_mode: musb_default {
+					default_mux {
+						function = "usb";
+						groups = "usb_a_1";
+					};
+					default_cfg1 {
+						pins =
+						"GPIO256_AF28", /* NXT */
+						"GPIO258_AD29", /* XCLK */
+						"GPIO259_AC29", /* DIR */
+						"GPIO260_AD28", /* DAT7 */
+						"GPIO261_AD26", /* DAT6 */
+						"GPIO262_AE26", /* DAT5 */
+						"GPIO263_AG29", /* DAT4 */
+						"GPIO264_AE27", /* DAT3 */
+						"GPIO265_AD27", /* DAT2 */
+						"GPIO266_AC28", /* DAT1 */
+						"GPIO267_AC27"; /* DAT0 */
+						ste,config = <&in_nopull>;
+					};
+					default_cfg2 {
+						pins = "GPIO257_AE29"; /* STP */
+						ste,config = <&out_hi>;
+					};
+				};
+
+				musb_sleep_mode: musb_sleep {
+					sleep_cfg1 {
+						pins =
+						"GPIO256_AF28", /* NXT */
+						"GPIO258_AD29", /* XCLK */
+						"GPIO259_AC29"; /* DIR */
+						ste,config = <&slpm_wkup_pdis_en>;
+					};
+					sleep_cfg2 {
+						pins = "GPIO257_AE29"; /* STP */
+						ste,config = <&slpm_out_hi_wkup_pdis>;
+					};
+					sleep_cfg3 {
+						pins =
+						"GPIO260_AD28", /* DAT7 */
+						"GPIO261_AD26", /* DAT6 */
+						"GPIO262_AE26", /* DAT5 */
+						"GPIO263_AG29", /* DAT4 */
+						"GPIO264_AE27", /* DAT3 */
+						"GPIO265_AD27", /* DAT2 */
+						"GPIO266_AC28", /* DAT1 */
+						"GPIO267_AC27"; /* DAT0 */
+						ste,config = <&slpm_in_wkup_pdis_en>;
+					};
+				};
+			};
+
+			mcde {
+				lcd_default_mode: lcd_default {
+					default_mux {
+						/* Mux in VSI0 and all the data lines */
+						function = "lcd";
+						groups =
+						"lcdvsi0_a_1", /* VSI0 for LCD */
+						"lcd_d0_d7_a_1", /* Data lines */
+						"lcd_d8_d11_a_1", /* TV-out */
+						"lcdaclk_b_1", /* Clock line for TV-out */
+						"lcdvsi1_a_1"; /* VSI1 for HDMI */
+					};
+					default_cfg1 {
+						pins =
+						"GPIO68_E1", /* VSI0 */
+						"GPIO69_E2"; /* VSI1 */
+						ste,config = <&in_pu>;
+					};
+				};
+				lcd_sleep_mode: lcd_sleep {
+					sleep_cfg1 {
+						pins = "GPIO69_E2"; /* VSI1 */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+				};
+			};
+
+			ske {
+				/* SKE keys on position 2 in an 8x8 matrix */
+				ske_kpa2_default_mode: ske_kpa2_default {
+					default_mux {
+						function = "kp";
+						groups = "kp_a_2";
+					};
+					default_cfg1 {
+						pins =
+						"GPIO153_B17", /* I7 */
+						"GPIO154_C16", /* I6 */
+						"GPIO155_C19", /* I5 */
+						"GPIO156_C17", /* I4 */
+						"GPIO161_D21", /* I3 */
+						"GPIO162_D20", /* I2 */
+						"GPIO163_C20", /* I1 */
+						"GPIO164_B21"; /* I0 */
+						ste,config = <&in_pd>;
+					};
+					default_cfg2 {
+						pins =
+						"GPIO157_A18", /* O7 */
+						"GPIO158_C18", /* O6 */
+						"GPIO159_B19", /* O5 */
+						"GPIO160_B20", /* O4 */
+						"GPIO165_C21", /* O3 */
+						"GPIO166_A22", /* O2 */
+						"GPIO167_B24", /* O1 */
+						"GPIO168_C22"; /* O0 */
+						ste,config = <&out_lo>;
+					};
+				};
+				ske_kpa2_sleep_mode: ske_kpa2_sleep {
+					sleep_cfg1 {
+						pins =
+						"GPIO153_B17", /* I7 */
+						"GPIO154_C16", /* I6 */
+						"GPIO155_C19", /* I5 */
+						"GPIO156_C17", /* I4 */
+						"GPIO161_D21", /* I3 */
+						"GPIO162_D20", /* I2 */
+						"GPIO163_C20", /* I1 */
+						"GPIO164_B21"; /* I0 */
+						ste,config = <&slpm_in_pu_wkup_pdis_en>;
+					};
+					sleep_cfg2 {
+						pins =
+						"GPIO157_A18", /* O7 */
+						"GPIO158_C18", /* O6 */
+						"GPIO159_B19", /* O5 */
+						"GPIO160_B20", /* O4 */
+						"GPIO165_C21", /* O3 */
+						"GPIO166_A22", /* O2 */
+						"GPIO167_B24", /* O1 */
+						"GPIO168_C22"; /* O0 */
+						ste,config = <&slpm_out_lo_pdis>;
+					};
+				};
+				/*
+				 * SKE keys on position 1 and "other C1" combi giving
+				 * six rows of six keys.
+				 */
+				ske_kpaoc1_default_mode: ske_kpaoc1_default {
+					default_mux {
+						function = "kp";
+						groups = "kp_a_1", "kp_oc1_1";
+					};
+					default_cfg1 {
+						pins =
+						"GPIO91_B6", /* KP_O0 */
+						"GPIO90_A3", /* KP_O1 */
+						"GPIO87_B3", /* KP_O2 */
+						"GPIO86_C6", /* KP_O3 */
+						"GPIO96_D8", /* KP_O6 */
+						"GPIO94_D7"; /* KP_O7 */
+						ste,config = <&out_lo>;
+					};
+					default_cfg2 {
+						pins =
+						"GPIO93_B7", /* KP_I0 */
+						"GPIO92_D6", /* KP_I1 */
+						"GPIO89_E6", /* KP_I2 */
+						"GPIO88_C4", /* KP_I3 */
+						"GPIO97_D9", /* KP_I6 */
+						"GPIO95_E8"; /* KP_I7 */
+						ste,config = <&in_pu>;
+					};
+				};
+			};
+
+			wlan {
+				wlan_default_mode: wlan_default {
+					/*
+					 * Activate this mode with the WLAN chip.
+					 * These are plain GPIO pins used by WLAN
+					 */
+					default_cfg1 {
+						pins =
+						"GPIO226_AF8", /* WLAN_PMU_EN */
+						"GPIO85_D5"; /* WLAN_ENA */
+						ste,config = <&gpio_out_lo>;
+					};
+					default_cfg2 {
+						pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/ste-href-stuib.dtsi b/src/arm/ste-href-stuib.dtsi
new file mode 100644
index 000000000000..7d4f8184c522
--- /dev/null
+++ b/src/arm/ste-href-stuib.dtsi
@@ -0,0 +1,121 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&ab8500_ldo_aux1_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>;
+
+		button@139 {
+			/* Proximity sensor */
+			gpios = <&gpio6 25 0x4>;
+			linux,code = <11>; /* SW_FRONT_PROXIMITY */
+			label = "SFH7741 Proximity Sensor";
+		};
+		button@145 {
+			/* Hall sensor */
+			gpios = <&gpio4 17 0x4>;
+			linux,code = <0>; /* SW_LID */
+			label = "HED54XXU11 Hall Effect Sensor";
+		};
+	};
+
+	soc {
+		i2c@80004000 {
+			stmpe1601: stmpe1601@40 {
+				compatible = "st,stmpe1601";
+				reg = <0x40>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+				interrupt-parent = <&gpio6>;
+				interrupt-controller;
+				vcc-supply = <&db8500_vsmps2_reg>;
+				vio-supply = <&db8500_vsmps2_reg>;
+
+				wakeup-source;
+				st,autosleep-timeout = <1024>;
+
+				stmpe_keypad {
+					compatible = "st,stmpe-keypad";
+
+					debounce-interval = <64>;
+					st,scan-count = <8>;
+					st,no-autorepeat;
+
+					linux,keymap = <0x205006b
+							0x4010074
+							0x3050072
+							0x1030004
+							0x502006a
+							0x500000a
+							0x5008b
+							0x706001c
+							0x405000b
+							0x6070003
+							0x3040067
+							0x303006c
+							0x60400e7
+							0x602009e
+							0x4020073
+							0x5050002
+							0x4030069
+							0x3020008>;
+				};
+			};
+		};
+
+		i2c@80110000 {
+			bu21013_tp@5c {
+				compatible = "rohm,bu21013_tp";
+				reg = <0x5c>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				rohm,touch-max-x = <384>;
+				rohm,touch-max-y = <704>;
+				rohm,flip-y;
+			};
+
+			bu21013_tp@5d {
+				compatible = "rohm,bu21013_tp";
+				reg = <0x5d>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				rohm,touch-max-x = <384>;
+				rohm,touch-max-y = <704>;
+				rohm,flip-y;
+			};
+		};
+
+		pinctrl {
+			prox {
+				prox_stuib_mode: prox_stuib {
+					stuib_cfg {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			hall {
+				hall_stuib_mode: stuib_tvk {
+					stuib_cfg {
+						pins = "GPIO145_C13";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/ste-href-tvk1281618.dtsi b/src/arm/ste-href-tvk1281618.dtsi
new file mode 100644
index 000000000000..062c6aae3afa
--- /dev/null
+++ b/src/arm/ste-href-tvk1281618.dtsi
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the TVK1281618 UIB
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		vdd-supply = <&ab8500_ldo_aux1_reg>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>;
+
+		button@139 {
+			/* Proximity sensor */
+			gpios = <&gpio6 25 0x4>;
+			linux,code = <11>; /* SW_FRONT_PROXIMITY */
+			label = "SFH7741 Proximity Sensor";
+		};
+		button@145 {
+			/* Hall sensor */
+			gpios = <&gpio4 17 0x4>;
+			linux,code = <0>; /* SW_LID */
+			label = "HED54XXU11 Hall Effect Sensor";
+		};
+	};
+
+	soc {
+		/* Add Synaptics touch screen, TC35893 keypad etc here */
+		i2c@80004000 {
+			tc35893@44 {
+				compatible = "toshiba,tc35893";
+				reg = <0x44>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tc35893_tvk_mode>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				tc3589x_gpio {
+					compatible = "toshiba,tc3589x-gpio";
+					interrupts = <0>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+				tc3589x_keypad {
+					compatible = "toshiba,tc3589x-keypad";
+					interrupts = <6>;
+					debounce-delay-ms = <4>;
+					keypad,num-columns = <8>;
+					keypad,num-rows = <8>;
+					linux,no-autorepeat;
+					linux,wakeup;
+					linux,keymap = <0x0301006b
+						        0x04010066
+							0x06040072
+							0x040200d7
+							0x0303006a
+							0x0205000e
+							0x0607008b
+							0x0500001c
+							0x0403000b
+							0x03040034
+							0x05020067
+							0x0305006c
+							0x040500e7
+							0x0005009e
+							0x06020073
+							0x01030039
+							0x07060069
+							0x050500d9>;
+				};
+			};
+		};
+		/* Sensors mounted on this board variant */
+		i2c@80128000 {
+			lsm303dlh@18 {
+				/* Accelerometer */
+				compatible = "st,lsm303dlh-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x18>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_tvk_mode>;
+			};
+			lsm303dlm@1e {
+				/* Magnetometer */
+				compatible = "st,lsm303dlm-magn";
+				reg = <0x1e>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&magneto_tvk_mode>;
+			};
+			l3g4200d@68 {
+				/* Gyroscope */
+				compatible = "st,l3g4200d-gyro";
+				st,drdy-int-pin = <2>;
+				reg = <0x68>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+			lsp001wm@5c {
+				/* Barometer/pressure sensor */
+				compatible = "st,lps001wp-press";
+				reg = <0x5c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+		};
+		pinctrl {
+			/* Pull up this GPIO pin */
+			tc35893 {
+				tc35893_tvk_mode: tc35893_tvk {
+					tvk_cfg {
+						pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			prox {
+				prox_tvk_mode: prox_tvk {
+					tvk_cfg {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			hall {
+				hall_tvk_mode: hall_tvk {
+					tvk_cfg {
+						pins = "GPIO145_C13";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			accelerometer {
+				accel_tvk_mode: accel_tvk {
+					/* Accelerometer interrupt lines 1 & 2 */
+					tvk_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			magnetometer {
+				magneto_tvk_mode: magneto_tvk {
+					/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+					tvk_cfg1 {
+						pins = "GPIO31_V3";
+						ste,config = <&gpio_in_pu>;
+					};
+					tvk_cfg2 {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/ste-href.dtsi b/src/arm/ste-href.dtsi
new file mode 100644
index 000000000000..bf8f0eddc2c0
--- /dev/null
+++ b/src/arm/ste-href.dtsi
@@ -0,0 +1,268 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "ste-dbx5x0.dtsi"
+#include "ste-href-family-pinctrl.dtsi"
+
+/ {
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	soc {
+		usb_per5@a03e0000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&musb_default_mode>;
+			pinctrl-1 = <&musb_sleep_mode>;
+		};
+
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart0_default_mode>;
+			pinctrl-1 = <&uart0_sleep_mode>;
+			status = "okay";
+		};
+
+		uart@80121000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart1_default_mode>;
+			pinctrl-1 = <&uart1_sleep_mode>;
+			status = "okay";
+		};
+
+		uart@80007000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart2_default_mode>;
+			pinctrl-1 = <&uart2_sleep_mode>;
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c0_default_mode>;
+			pinctrl-1 = <&i2c0_sleep_mode>;
+		};
+
+		i2c@80122000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c1_default_mode>;
+			pinctrl-1 = <&i2c1_sleep_mode>;
+		};
+
+		i2c@80128000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c2_default_mode>;
+			pinctrl-1 = <&i2c2_sleep_mode>;
+			lp5521@33 {
+				compatible = "national,lp5521";
+				reg = <0x33>;
+				label = "lp5521_pri";
+				clock-mode = /bits/ 8 <2>;
+				chan0 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+					linux,default-trigger = "heartbeat";
+				};
+				chan1 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan2 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+			};
+			lp5521@34 {
+				compatible = "national,lp5521";
+				reg = <0x34>;
+				label = "lp5521_sec";
+				clock-mode = /bits/ 8 <2>;
+				chan0 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan1 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+				chan2 {
+					led-cur = /bits/ 8 <0x2f>;
+					max-cur = /bits/ 8 <0x5f>;
+				};
+			};
+			bh1780@29 {
+				compatible = "rohm,bh1780gli";
+				reg = <0x29>;
+			};
+		};
+
+		i2c@80110000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c3_default_mode>;
+			pinctrl-1 = <&i2c3_sleep_mode>;
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			full-pwr-cycle;
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&vmmci>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi0_default_mode>;
+			pinctrl-1 = <&sdi0_sleep_mode>;
+
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			non-removable;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi1_default_mode>;
+			pinctrl-1 = <&sdi1_sleep_mode>;
+
+			status = "okay";
+		};
+
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			non-removable;
+			vmmc-supply = <&db8500_vsmps2_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi2_default_mode>;
+			pinctrl-1 = <&sdi2_sleep_mode>;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			non-removable;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi4_default_mode>;
+			pinctrl-1 = <&sdi4_sleep_mode>;
+
+			status = "okay";
+		};
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+		};
+
+		msp0: msp@80123000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp0_default_mode>;
+			status = "okay";
+		};
+
+		msp1: msp@80124000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp1_default_mode>;
+			status = "okay";
+		};
+
+		msp2: msp@80117000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp2_default_mode>;
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+
+		prcmu@80157000 {
+			ab8500 {
+				ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
+				};
+
+				ab8500-regulators {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
+		};
+
+		mcde@a0350000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&lcd_default_mode>;
+			pinctrl-1 = <&lcd_sleep_mode>;
+		};
+	};
+};
diff --git a/src/arm/ste-hrefprev60-stuib.dts b/src/arm/ste-hrefprev60-stuib.dts
new file mode 100644
index 000000000000..2b1cb5b584b6
--- /dev/null
+++ b/src/arm/ste-hrefprev60-stuib.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-hrefprev60.dtsi"
+#include "ste-href-stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) and ST UIB";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	soc {
+		/* Reset line for the BU21013 touchscreen */
+		i2c@80110000 {
+			/* Only one of these will be used */
+			bu21013_tp@5c {
+				touch-gpio = <&gpio2 12 0x4>;
+				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			};
+			bu21013_tp@5d {
+				touch-gpio = <&gpio2 12 0x4>;
+				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			};
+		};
+	};
+};
diff --git a/src/arm/ste-hrefprev60-tvk.dts b/src/arm/ste-hrefprev60-tvk.dts
new file mode 100644
index 000000000000..59523f866812
--- /dev/null
+++ b/src/arm/ste-hrefprev60-tvk.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-hrefprev60.dtsi"
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+};
diff --git a/src/arm/ste-hrefprev60.dtsi b/src/arm/ste-hrefprev60.dtsi
new file mode 100644
index 000000000000..7f3975b58d16
--- /dev/null
+++ b/src/arm/ste-hrefprev60.dtsi
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF+ prior to the v60 variant.
+ */
+
+#include "ste-dbx5x0.dtsi"
+#include "ste-href-ab8500.dtsi"
+#include "ste-href.dtsi"
+
+/ {
+	gpio_keys {
+		button@1 {
+			gpios = <&tc3589x_gpio 7 0x4>;
+		};
+	};
+
+	soc {
+		i2c@80004000 {
+			tps61052@33 {
+				compatible = "tps61052";
+				reg = <0x33>;
+			};
+
+			tc35892@42 {
+				compatible = "toshiba,tc35892";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tc35892_hrefprev60_mode>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		ssp@80002000 {
+			/*
+			 * On the first generation boards, this SSP/SPI port was connected
+			 * to the AB8500.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&ssp0_hrefprev60_mode>;
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			cd-gpios  = <&tc3589x_gpio 3 0x4>;
+		};
+
+		vmmci: regulator-gpio {
+			gpios = <&tc3589x_gpio 18 0x4>;
+			enable-gpio = <&tc3589x_gpio 17 0x4>;
+		};
+
+		pinctrl {
+			/* Set this up using hogs */
+			pinctrl-names = "default";
+			pinctrl-0 = <&ipgpio_hrefprev60_mode>;
+
+			ssp0 {
+				ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
+					hrefprev60_mux {
+						function = "ssp0";
+						groups = "ssp0_a_1";
+					};
+					hrefprev60_cfg1 {
+						pins = "GPIO145_C13"; /* RXD */
+						ste,config = <&in_pd>;
+					};
+
+				};
+			};
+			sdi0 {
+				/* This additional pin needed on early MOP500 and HREFs previous to v60 */
+				sdi0_default_mode: sdi0_default {
+					hrefprev60_mux {
+						function = "mc0";
+						groups = "mc0dat31dir_a_1";
+					};
+					hrefprev60_cfg1 {
+						pins = "GPIO21_AB3"; /* DAT31DIR */
+						ste,config = <&out_hi>;
+					};
+
+				};
+			};
+			tc35892 {
+				tc35892_hrefprev60_mode: tc35892_hrefprev60 {
+					hrefprev60_cfg {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			ipgpio {
+				 ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
+					hrefprev60_mux {
+						function = "ipgpio";
+						groups = "ipgpio0_c_1", "ipgpio1_c_1";
+					};
+					hrefprev60_cfg1 {
+						pins = "GPIO6_AF6", "GPIO7_AG5";
+						ste,config = <&in_pu>;
+					};
+				 };
+			};
+		};
+	};
+};
diff --git a/src/arm/ste-hrefv60plus-stuib.dts b/src/arm/ste-hrefv60plus-stuib.dts
new file mode 100644
index 000000000000..8c6a2de56cf1
--- /dev/null
+++ b/src/arm/ste-hrefv60plus-stuib.dts
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF version 60 or later with the ST UIB
+ */
+
+/dts-v1/;
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) and ST UIB";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	soc {
+		/* Reset line for the BU21013 touchscreen */
+		i2c@80110000 {
+			/* Only one of these will be used */
+			bu21013_tp@5c {
+				touch-gpio = <&gpio2 20 0x4>;
+				reset-gpio = <&gpio4 17 0x4>;
+			};
+			bu21013_tp@5d {
+				touch-gpio = <&gpio2 20 0x4>;
+				reset-gpio = <&gpio4 17 0x4>;
+			};
+		};
+	};
+};
diff --git a/src/arm/ste-hrefv60plus-tvk.dts b/src/arm/ste-hrefv60plus-tvk.dts
new file mode 100644
index 000000000000..d53cccdce776
--- /dev/null
+++ b/src/arm/ste-hrefv60plus-tvk.dts
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF version 60 or later with the TVK1281618 UIB
+ */
+
+/dts-v1/;
+#include "ste-hrefv60plus.dtsi"
+#include "ste-href-tvk1281618.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+};
diff --git a/src/arm/ste-hrefv60plus.dtsi b/src/arm/ste-hrefv60plus.dtsi
new file mode 100644
index 000000000000..a4bc9e77d640
--- /dev/null
+++ b/src/arm/ste-hrefv60plus.dtsi
@@ -0,0 +1,218 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "ste-dbx5x0.dtsi"
+#include "ste-href-ab8500.dtsi"
+#include "ste-href.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
+
+	soc {
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			cd-gpios  = <&gpio2 31 0x4>; // 95
+		};
+
+		vmmci: regulator-gpio {
+			gpios = <&gpio0 5 0x4>;
+			enable-gpio = <&gpio5 9 0x4>;
+		};
+
+		pinctrl {
+			/*
+			 * Set this up using hogs, as time goes by and as seems fit, these
+			 * can be moved over to being controlled by respective device.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&ipgpio_hrefv60_mode>,
+				  <&etm_hrefv60_mode>,
+				  <&nahj_hrefv60_mode>,
+				  <&nfc_hrefv60_mode>,
+				  <&force_hrefv60_mode>,
+				  <&dipro_hrefv60_mode>,
+				  <&vaudio_hf_hrefv60_mode>,
+				  <&gbf_hrefv60_mode>,
+				  <&hdtv_hrefv60_mode>,
+				  <&touch_hrefv60_mode>;
+
+			sdi0 {
+				/* SD card detect GPIO pin, extend default state */
+				sdi0_default_mode: sdi0_default {
+					default_hrefv60_cfg1 {
+						pins = "GPIO95_E8";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			ipgpio {
+				/*
+				 * XENON Flashgun on image processor GPIO (controlled from image
+				 * processor firmware), mux in these image processor GPIO lines 0
+				 * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant
+				 * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias
+				 * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output.
+				 */
+				ipgpio_hrefv60_mode: ipgpio_hrefv60 {
+					hrefv60_mux {
+						function = "ipgpio";
+						groups = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1";
+					};
+					hrefv60_cfg1 {
+						pins = "GPIO6_AF6", "GPIO7_AG5";
+						ste,config = <&in_pu>;
+					};
+					hrefv60_cfg2 {
+						pins = "GPIO21_AB3";
+						ste,config = <&gpio_out_lo>;
+					};
+					hrefv60_cfg3 {
+						pins = "GPIO64_F3";
+						ste,config = <&out_lo>;
+					};
+				};
+			};
+			etm {
+				/*
+				 * Drive D19-D23 for the ETM PTM trace interface low,
+				 * (presumably pins are unconnected therefore grounded here,
+				 * the "other alt C1" setting enables these pins)
+				 */
+				etm_hrefv60_mode: etm_hrefv60 {
+					hrefv60_cfg1 {
+						pins =
+						"GPIO70_G5",
+						"GPIO71_G4",
+						"GPIO72_H4",
+						"GPIO73_H3",
+						"GPIO74_J3";
+						ste,config = <&gpio_out_lo>;
+					};
+				 };
+			};
+			nahj {
+				nahj_hrefv60_mode: nahj_hrefv60 {
+					/* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */
+					hrefv60_cfg1 {
+						pins = "GPIO76_J2";
+						ste,config = <&gpio_out_lo>;
+					};
+					hrefv60_cfg2 {
+						pins = "GPIO216_AG12";
+						ste,config = <&gpio_out_hi>;
+					};
+				 };
+			};
+			nfc {
+				nfc_hrefv60_mode: nfc_hrefv60 {
+					/* NFC ENA and RESET to low, pulldown IRQ line */
+					hrefv60_cfg1 {
+						pins =
+						"GPIO77_H1", /* NFC_ENA */
+						"GPIO142_C11"; /* NFC_RESET */
+						ste,config = <&gpio_out_lo>;
+					};
+					hrefv60_cfg2 {
+						pins = "GPIO144_B13"; /* NFC_IRQ */
+						ste,config = <&gpio_in_pd>;
+					};
+				 };
+			};
+			force {
+				force_hrefv60_mode: force_hrefv60 {
+					hrefv60_cfg1 {
+						pins = "GPIO91_B6"; /* FORCE_SENSING_INT */
+						ste,config = <&gpio_in_pu>;
+					};
+					hrefv60_cfg2 {
+						pins =
+						"GPIO92_D6", /* FORCE_SENSING_RST */
+						"GPIO97_D9"; /* FORCE_SENSING_WU */
+						ste,config = <&gpio_out_lo>;
+					};
+				 };
+			};
+			dipro {
+				dipro_hrefv60_mode: dipro_hrefv60 {
+					hrefv60_cfg1 {
+						pins = "GPIO139_C9"; /* DIPRO_INT */
+						ste,config = <&gpio_in_pu>;
+					};
+				 };
+			};
+			vaudio_hf {
+				vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 {
+					/* Audio Amplifier HF enable GPIO */
+					hrefv60_cfg1 {
+						pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */
+						ste,config = <&gpio_out_hi>;
+					};
+				 };
+			};
+			gbf {
+				gbf_hrefv60_mode: gbf_hrefv60 {
+					/*
+					 * GBF (GPS, Bluetooth, FM-radio) interface,
+					 * pull low to reset state
+					 */
+					hrefv60_cfg1 {
+						pins = "GPIO171_D23"; /* GBF_ENA_RESET */
+						ste,config = <&gpio_out_lo>;
+					};
+				 };
+			};
+			hdtv {
+				hdtv_hrefv60_mode: hdtv_hrefv60 {
+					/* MSP : HDTV INTERFACE GPIO line */
+					hrefv60_cfg1 {
+						pins = "GPIO192_AJ27";
+						ste,config = <&gpio_in_pd>;
+					};
+				 };
+			};
+			touch {
+				touch_hrefv60_mode: touch_hrefv60 {
+					/*
+					 * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and
+					 * GPIO 67 for interrupts. Pull-up the IRQ line and drive both
+					 * reset signals low.
+					 */
+					hrefv60_cfg1 {
+						pins = "GPIO143_D12", "GPIO146_D13";
+						ste,config = <&gpio_out_lo>;
+					};
+					hrefv60_cfg2 {
+						pins = "GPIO67_G2";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			mcde {
+				lcd_hrefv60_mode: lcd_hrefv60 {
+					/*
+					 * Display Interface 1 uses GPIO 65 for RST (reset).
+					 * Display Interface 2 uses GPIO 66 for RST (reset).
+					 * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset)
+					 */
+					hrefv60_cfg1 {
+						pins ="GPIO65_F1";
+						ste,config = <&gpio_out_hi>;
+					};
+					hrefv60_cfg2 {
+						pins ="GPIO66_G3";
+						ste,config = <&gpio_out_lo>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/ste-nomadik-nhk15.dts b/src/arm/ste-nomadik-nhk15.dts
new file mode 100644
index 000000000000..3d0b8755caee
--- /dev/null
+++ b/src/arm/ste-nomadik-nhk15.dts
@@ -0,0 +1,151 @@
+/*
+ * Device Tree for the ST-Ericsson Nomadik S8815 board
+ * Produced by Calao Systems
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "ste-nomadik-stn8815.dtsi"
+
+/ {
+	model = "Nomadik STN8815NHK";
+	compatible = "st,nomadik-nhk-15";
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
+	};
+
+	aliases {
+		stmpe-i2c0 = &stmpe0;
+		stmpe-i2c1 = &stmpe1;
+	};
+
+	pinctrl {
+		stmpe2401_1 {
+			stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
+				nhk_cfg1 {
+					pins = "GPIO76_B20"; // IRQ line
+					ste,input = <0>;
+				};
+				nhk_cfg2 {
+					pins = "GPIO77_B8"; // reset line
+					ste,output = <1>;
+				};
+			};
+		};
+		stmpe2401_2 {
+			stmpe2401_2_nhk_mode: stmpe2401_2_nhk {
+				nhk_cfg1 {
+					pins = "GPIO78_A8"; // IRQ line
+					ste,input = <0>;
+				};
+				nhk_cfg2 {
+					pins = "GPIO79_C9"; // reset line
+					ste,output = <1>;
+				};
+			};
+		};
+	};
+
+	src@101e0000 {
+		/* These chrystal outputs are not used on this board */
+		disable-sxtalo;
+		disable-mxtalo;
+	};
+
+	/* This is where the interrupt is routed on the NHK-15 debug board */
+	external-bus@34000000 {
+		compatible = "simple-bus";
+		reg = <0x34000000 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x34000000 0x1000000>;
+		ethernet@300 {
+			compatible = "smsc,lan91c111";
+			reg = <0x300 0x0fd00>;
+			reg-io-width = <2>;
+			reset-gpios = <&stmpe_gpio44 10 GPIO_ACTIVE_HIGH>;
+			interrupt-parent = <&stmpe_gpio44>;
+			interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	i2c0 {
+		stmpe0: stmpe2401@43 {
+			compatible = "st,stmpe2401";
+			reg = <0x43>;
+			reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; // GPIO77
+			interrupts = <12 IRQ_TYPE_EDGE_FALLING>; // GPIO76
+			interrupt-parent = <&gpio2>;
+			interrupt-controller;
+			wakeup-source;
+			pinctrl-names = "default";
+			pinctrl-0 = <&stmpe2401_1_nhk_mode>;
+			stmpe_gpio43: stmpe_gpio {
+				compatible = "st,stmpe-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				/* Some pins in alternate functions */
+				st,norequest-mask = <0xf0f002>;
+			};
+			stmpe_keypad {
+				compatible = "st,stmpe-keypad";
+				debounce-interval = <64>;
+				st,scan-count = <8>;
+				st,no-autorepeat;
+				keypad,num-rows = <8>;
+				keypad,num-columns = <8>;
+				linux,keymap = <0x00020072 // Vol down
+						0x00030073 // Vol up
+						0x0100009e // Back
+						0x010100e3 // TV out
+						0x01020098 // Lock
+						0x0103013b // Start
+						0x020000a3 // Next
+						0x020100a4 // Play
+						0x020200a5 // Prev
+						0x02030160 // OK
+						0x03000069 // Left
+						0x0301006a // Right
+						0x03020067 // Up
+						0x0303006c>; // Down
+			};
+		};
+		stmpe1: stmpe2401@44 {
+			compatible = "st,stmpe2401";
+			reg = <0x44>;
+			reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; // GPIO79
+			interrupts = <14 IRQ_TYPE_EDGE_FALLING>; // GPIO78
+			interrupt-parent = <&gpio2>;
+			interrupt-controller;
+			wakeup-source;
+			pinctrl-names = "default";
+			pinctrl-0 = <&stmpe2401_2_nhk_mode>;
+			stmpe_gpio44: stmpe_gpio {
+				compatible = "st,stmpe-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+	};
+
+	amba {
+		mmcsd: sdi@101f6000 {
+			cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* Custom board node with GPIO pins to active etc */
+	usb-s8815 {
+		/* This will turn off SATA so that MMC/SD can thrive */
+		mmcsd-gpio {
+			gpios = <&stmpe_gpio44 2 0x1>;
+		};
+	};
+};
diff --git a/src/arm/ste-nomadik-pinctrl.dtsi b/src/arm/ste-nomadik-pinctrl.dtsi
new file mode 100644
index 000000000000..e6f22b266420
--- /dev/null
+++ b/src/arm/ste-nomadik-pinctrl.dtsi
@@ -0,0 +1,175 @@
+/*
+ * Copyright 2012 ST-Ericsson
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/pinctrl/nomadik.h>
+
+/ {
+	in_nopull: in_nopull {
+		ste,input = <INPUT_NOPULL>;
+	};
+
+	in_pu: input_pull_up {
+		ste,input = <INPUT_PULLUP>;
+	};
+
+	in_pd: input_pull_down {
+		ste,input = <INPUT_PULLDOWN>;
+	};
+
+	out_hi: output_high {
+		ste,output = <OUTPUT_HIGH>;
+	};
+
+	out_lo: output_low {
+		ste,output = <OUTPUT_LOW>;
+	};
+
+	gpio_in_pu: gpio_input_pull_up {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,input = <INPUT_PULLUP>;
+	};
+
+	gpio_in_pd: gpio_input_pull_down {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,input = <INPUT_PULLDOWN>;
+	};
+
+	gpio_out_lo: gpio_output_low {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,output = <OUTPUT_LOW>;
+	};
+
+	gpio_out_hi: gpio_output_high {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,output = <OUTPUT_HIGH>;
+	};
+
+	slpm_pdis: slpm_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_wkup_pdis: slpm_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_wkup_pdis_en: slpm_wkup_pdis_en {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+	};
+
+	slpm_in_pu: slpm_in_pu {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_INPUT_PULLUP>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_in_pdis: slpm_in_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_in_wkup_pdis: slpm_in_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_in_wkup_pdis_en: slpm_in_wkup_pdis_en {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+	};
+
+	slpm_in_pu_wkup_pdis_en: slpm_in_wkup_pdis_en {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_INPUT_PULLUP>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+	};
+
+	slpm_out_lo: slpm_out_lo {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_out_hi: slpm_out_hi {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+	};
+
+	slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_out_lo_pdis: slpm_out_lo_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_out_wkup_pdis: slpm_out_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_DIR_OUTPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	in_wkup_pdis: in_wkup_pdis {
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	in_wkup_pdis_en: in_wkup_pdis_en {
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>;
+	};
+
+	out_lo_wkup_pdis: out_lo_wkup_pdis {
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	out_hi_wkup_pdis: out_hi_wkup_pdis {
+		ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	out_wkup_pdis: out_wkup_pdis {
+		ste,sleep-output = <SLPM_DIR_OUTPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+};
diff --git a/src/arm/ste-nomadik-s8815.dts b/src/arm/ste-nomadik-s8815.dts
new file mode 100644
index 000000000000..85d3b95dfdba
--- /dev/null
+++ b/src/arm/ste-nomadik-s8815.dts
@@ -0,0 +1,141 @@
+/*
+ * Device Tree for the ST-Ericsson Nomadik S8815 board
+ * Produced by Calao Systems
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "ste-nomadik-stn8815.dtsi"
+
+/ {
+	model = "Calao Systems USB-S8815";
+	compatible = "calaosystems,usb-s8815";
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
+	};
+
+	src@101e0000 {
+		/* These chrystal drivers are not used on this board */
+		disable-sxtalo;
+		disable-mxtalo;
+	};
+
+	pinctrl {
+		/* Hog CD pins */
+		pinctrl-names = "default";
+		pinctrl-0 = <&cd_default_mode>;
+
+		mmcsd-cd {
+			cd_default_mode: cd_default {
+				cd_default_cfg1 {
+					/* CD input GPIO */
+					pins = "GPIO111_H21";
+					ste,input = <0>;
+				};
+				cd_default_cfg2 {
+					/* CD GPIO biasing */
+					pins = "GPIO112_J21";
+					ste,output = <0>;
+				};
+			};
+		};
+		gpioi2c {
+			gpioi2c_default_mode: gpioi2c_default {
+				gpioi2c_default_cfg {
+					pins = "GPIO73_C21", "GPIO74_C20";
+					ste,input = <0>;
+				};
+			};
+		};
+		user-led {
+			user_led_default_mode: user_led_default {
+				user_led_default_cfg {
+					pins = "GPIO2_C5";
+					ste,output = <1>;
+				};
+			};
+		};
+		user-button {
+			user_button_default_mode: user_button_default {
+				user_button_default_cfg {
+					pins = "GPIO3_A4";
+					ste,input = <0>;
+				};
+			};
+		};
+	};
+
+	/* Ethernet */
+	external-bus@34000000 {
+		compatible = "simple-bus";
+		reg = <0x34000000 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x34000000 0x1000000>;
+		ethernet@300 {
+			compatible = "smsc,lan91c111";
+			reg = <0x300 0x0fd00>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	/* GPIO I2C connected to the USB portions of the STw4811 only */
+	gpio-i2c {
+		compatible = "i2c-gpio";
+		gpios = <&gpio2 10 0>, /* sda */
+			<&gpio2 9 0>; /* scl */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpioi2c_default_mode>;
+
+		stw4811@2d {
+			   compatible = "st,stw4811-usb";
+			   reg = <0x2d>;
+		};
+	};
+
+
+	/* Configure card detect for the uSD slot */
+	amba {
+		mmcsd: sdi@101f6000 {
+			cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/* Custom board node with GPIO pins to active etc */
+	usb-s8815 {
+		/* This will bias the MMC/SD card detect line */
+		mmcsd-gpio {
+			gpios = <&gpio3 16 0x1>;
+		};
+	};
+
+	/* The user LED on the board is set up to be used for heartbeat */
+	leds {
+		compatible = "gpio-leds";
+		user-led {
+			label = "user_led";
+			gpios = <&gpio0 2 0x1>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_led_default_mode>;
+		};
+	};
+
+	/* User key mapped in as "escape" */
+	gpio-keys {
+		compatible = "gpio-keys";
+		user-button {
+			label = "user_button";
+			gpios = <&gpio0 3 0x1>;
+			linux,code = <1>; /* KEY_ESC */
+			gpio-key,wakeup;
+			pinctrl-names = "default";
+			pinctrl-0 = <&user_button_default_mode>;
+		};
+	};
+};
diff --git a/src/arm/ste-nomadik-stn8815.dtsi b/src/arm/ste-nomadik-stn8815.dtsi
new file mode 100644
index 000000000000..f182f6538e90
--- /dev/null
+++ b/src/arm/ste-nomadik-stn8815.dtsi
@@ -0,0 +1,814 @@
+/*
+ * Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0x00000000 0x04000000>,
+		    <0x08000000 0x04000000>;
+	};
+
+	L2: l2-cache {
+		compatible = "arm,l210-cache";
+		reg = <0x10210000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <30>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	mtu0: mtu@101e2000 {
+		/* Nomadik system timer */
+		compatible = "st,nomadik-mtu";
+		reg = <0x101e2000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <4>;
+		clocks = <&timclk>, <&pclk>;
+		clock-names = "timclk", "apb_pclk";
+	};
+
+	mtu1: mtu@101e3000 {
+		/* Secondary timer */
+		reg = <0x101e3000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <5>;
+		clocks = <&timclk>, <&pclk>;
+		clock-names = "timclk", "apb_pclk";
+	};
+
+	gpio0: gpio@101e4000 {
+		compatible = "st,nomadik-gpio";
+		reg =  <0x101e4000 0x80>;
+		interrupt-parent = <&vica>;
+		interrupts = <6>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-bank = <0>;
+		clocks = <&pclk>;
+	};
+
+	gpio1: gpio@101e5000 {
+		compatible = "st,nomadik-gpio";
+		reg =  <0x101e5000 0x80>;
+		interrupt-parent = <&vica>;
+		interrupts = <7>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-bank = <1>;
+		clocks = <&pclk>;
+	};
+
+	gpio2: gpio@101e6000 {
+		compatible = "st,nomadik-gpio";
+		reg =  <0x101e6000 0x80>;
+		interrupt-parent = <&vica>;
+		interrupts = <8>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-bank = <2>;
+		clocks = <&pclk>;
+	};
+
+	gpio3: gpio@101e7000 {
+		compatible = "st,nomadik-gpio";
+		reg =  <0x101e7000 0x80>;
+		interrupt-parent = <&vica>;
+		interrupts = <9>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-bank = <3>;
+		clocks = <&pclk>;
+	};
+
+	pinctrl {
+		compatible = "stericsson,stn8815-pinctrl";
+		/* Pin configurations */
+		uart0 {
+			uart0_default_mux: uart0_mux {
+				u0_default_mux {
+					function = "u0";
+					groups = "u0_a_1";
+				};
+			};
+		};
+		uart1 {
+			uart1_default_mux: uart1_mux {
+				u1_default_mux {
+					function = "u1";
+					groups = "u1_a_1";
+				};
+			};
+		};
+		mmcsd {
+			mmcsd_default_mux: mmcsd_mux {
+				mmcsd_default_mux {
+					function = "mmcsd";
+					groups = "mmcsd_a_1", "mmcsd_b_1";
+				};
+			};
+			mmcsd_default_mode: mmcsd_default {
+				mmcsd_default_cfg1 {
+					/* MCCLK */
+					pins = "GPIO8_B10";
+					ste,output = <0>;
+				};
+				mmcsd_default_cfg2 {
+					/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
+					pins = "GPIO10_C11", "GPIO15_A12",
+					"GPIO16_C13", "GPIO23_D15";
+					ste,output = <1>;
+				};
+				mmcsd_default_cfg3 {
+					/* MCCMD, MCDAT3-0, MCMSFBCLK */
+					pins = "GPIO9_A10", "GPIO11_B11",
+					"GPIO12_A11", "GPIO13_C12",
+					"GPIO14_B12", "GPIO24_C15";
+					ste,input = <1>;
+				};
+			};
+		};
+		i2c0 {
+			i2c0_default_mux: i2c0_mux {
+				i2c0_default_mux {
+					function = "i2c0";
+					groups = "i2c0_a_1";
+				};
+			};
+			i2c0_default_mode: i2c0_default {
+				i2c0_default_cfg {
+					pins = "GPIO62_D3", "GPIO63_D2";
+					ste,input = <0>;
+				};
+			};
+		};
+		i2c1 {
+			i2c1_default_mux: i2c1_mux {
+				i2c1_default_mux {
+					function = "i2c1";
+					groups = "i2c1_a_1";
+				};
+			};
+			i2c1_default_mode: i2c1_default {
+				i2c1_default_cfg {
+					pins = "GPIO53_L4", "GPIO54_L3";
+					ste,input = <0>;
+				};
+			};
+		};
+	};
+
+	src: src@101e0000 {
+		compatible = "stericsson,nomadik-src";
+		reg = <0x101e0000 0x1000>;
+
+		/*
+		 * MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
+		 * that is parent of TIMCLK, PLL1 and PLL2
+		 */
+		mxtal: mxtal@19.2M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+		};
+
+		/*
+		 * The 2.4 MHz TIMCLK reference clock is active at
+		 * boot time, this is actually the MXTALCLK @19.2 MHz
+		 * divided by 8. This clock is used by the timers and
+		 * watchdog. See page 105 ff.
+		 */
+		timclk: timclk@2.4M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <8>;
+			clock-mult = <1>;
+			clocks = <&mxtal>;
+		};
+
+		/* PLL1 is locked to MXTALI and variable from 20.4 to 334 MHz */
+		pll1: pll1@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-pll-clock";
+			pll-id = <1>;
+			clocks = <&mxtal>;
+		};
+
+		/* HCLK divides the PLL1 with 1,2,3 or 4 */
+		hclk: hclk@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-hclk-clock";
+			clocks = <&pll1>;
+		};
+		/* The PCLK domain uses HCLK right off */
+		pclk: pclk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&hclk>;
+		};
+
+		/* PLL2 is usually 864 MHz and divided into a few fixed rates */
+		pll2: pll2@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-pll-clock";
+			pll-id = <2>;
+			clocks = <&mxtal>;
+		};
+		clk216: clk216@216M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk108: clk108@108M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&clk216>;
+		};
+		clk72: clk72@72M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			/* The data sheet does not say how this is derived */
+			clock-div = <12>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk48: clk48@48M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			/* The data sheet does not say how this is derived */
+			clock-div = <18>;
+			clock-mult = <1>;
+			clocks = <&pll2>;
+		};
+		clk27: clk27@27M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&clk108>;
+		};
+
+		/* This apparently exists as well */
+		ulpiclk: ulpiclk@60M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <60000000>;
+		};
+
+		/*
+		 * IP AMBA bus clocks, driving the bus side of the
+		 * peripheral clocking, clock gates.
+		 */
+
+		hclkdma0: hclkdma0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <0>;
+			clocks = <&hclk>;
+		};
+		hclksmc: hclksmc@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <1>;
+			clocks = <&hclk>;
+		};
+		hclksdram: hclksdram@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <2>;
+			clocks = <&hclk>;
+		};
+		hclkdma1: hclkdma1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <3>;
+			clocks = <&hclk>;
+		};
+		hclkclcd: hclkclcd@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <4>;
+			clocks = <&hclk>;
+		};
+		pclkirda: pclkirda@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <5>;
+			clocks = <&pclk>;
+		};
+		pclkssp: pclkssp@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <6>;
+			clocks = <&pclk>;
+		};
+		pclkuart0: pclkuart0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <7>;
+			clocks = <&pclk>;
+		};
+		pclksdi: pclksdi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <8>;
+			clocks = <&pclk>;
+		};
+		pclki2c0: pclki2c0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <9>;
+			clocks = <&pclk>;
+		};
+		pclki2c1: pclki2c1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <10>;
+			clocks = <&pclk>;
+		};
+		pclkuart1: pclkuart1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <11>;
+			clocks = <&pclk>;
+		};
+		pclkmsp0: pclkmsp0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <12>;
+			clocks = <&pclk>;
+		};
+		hclkusb: hclkusb@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <13>;
+			clocks = <&hclk>;
+		};
+		hclkdif: hclkdif@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <14>;
+			clocks = <&hclk>;
+		};
+		hclksaa: hclksaa@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <15>;
+			clocks = <&hclk>;
+		};
+		hclksva: hclksva@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <16>;
+			clocks = <&hclk>;
+		};
+		pclkhsi: pclkhsi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <17>;
+			clocks = <&pclk>;
+		};
+		pclkxti: pclkxti@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <18>;
+			clocks = <&pclk>;
+		};
+		pclkuart2: pclkuart2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <19>;
+			clocks = <&pclk>;
+		};
+		pclkmsp1: pclkmsp1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <20>;
+			clocks = <&pclk>;
+		};
+		pclkmsp2: pclkmsp2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <21>;
+			clocks = <&pclk>;
+		};
+		pclkowm: pclkowm@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <22>;
+			clocks = <&pclk>;
+		};
+		hclkhpi: hclkhpi@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <23>;
+			clocks = <&hclk>;
+		};
+		pclkske: pclkske@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <24>;
+			clocks = <&pclk>;
+		};
+		pclkhsem: pclkhsem@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <25>;
+			clocks = <&pclk>;
+		};
+		hclk3d: hclk3d@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <26>;
+			clocks = <&hclk>;
+		};
+		hclkhash: hclkhash@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <27>;
+			clocks = <&hclk>;
+		};
+		hclkcryp: hclkcryp@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <28>;
+			clocks = <&hclk>;
+		};
+		pclkmshc: pclkmshc@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <29>;
+			clocks = <&pclk>;
+		};
+		hclkusbm: hclkusbm@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <30>;
+			clocks = <&hclk>;
+		};
+		hclkrng: hclkrng@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <31>;
+			clocks = <&hclk>;
+		};
+
+		/* IP kernel clocks */
+		clcdclk: clcdclk@0 {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <36>;
+			clocks = <&clk72 &clk48>;
+		};
+		irdaclk: irdaclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <37>;
+			clocks = <&clk48>;
+		};
+		sspiclk: sspiclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <38>;
+			clocks = <&clk48>;
+		};
+		uart0clk: uart0clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <39>;
+			clocks = <&clk48>;
+		};
+		sdiclk: sdiclk@48M {
+			/* Also called MCCLK in some documents */
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <40>;
+			clocks = <&clk48>;
+		};
+		i2c0clk: i2c0clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <41>;
+			clocks = <&clk48>;
+		};
+		i2c1clk: i2c1clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <42>;
+			clocks = <&clk48>;
+		};
+		uart1clk: uart1clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <43>;
+			clocks = <&clk48>;
+		};
+		mspclk0: mspclk0@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <44>;
+			clocks = <&clk48>;
+		};
+		usbclk: usbclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <45>;
+			clocks = <&clk48>; /* 48 MHz not ULPI */
+		};
+		difclk: difclk@72M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <46>;
+			clocks = <&clk72>;
+		};
+		ipi2cclk: ipi2cclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <47>;
+			clocks = <&clk48>; /* Guess */
+		};
+		ipbmcclk: ipbmcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <48>;
+			clocks = <&clk48>; /* Guess */
+		};
+		hsiclkrx: hsiclkrx@216M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <49>;
+			clocks = <&clk216>;
+		};
+		hsiclktx: hsiclktx@108M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <50>;
+			clocks = <&clk108>;
+		};
+		uart2clk: uart2clk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <51>;
+			clocks = <&clk48>;
+		};
+		mspclk1: mspclk1@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <52>;
+			clocks = <&clk48>;
+		};
+		mspclk2: mspclk2@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <53>;
+			clocks = <&clk48>;
+		};
+		owmclk: owmclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <54>;
+			clocks = <&clk48>; /* Guess */
+		};
+		skeclk: skeclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <56>;
+			clocks = <&clk48>; /* Guess */
+		};
+		x3dclk: x3dclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <58>;
+			clocks = <&clk48>; /* Guess */
+		};
+		pclkmsp3: pclkmsp3@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <59>;
+			clocks = <&pclk>;
+		};
+		mspclk3: mspclk3@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <60>;
+			clocks = <&clk48>;
+		};
+		mshcclk: mshcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <61>;
+			clocks = <&clk48>; /* Guess */
+		};
+		usbmclk: usbmclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <62>;
+			/* Stated as "48 MHz not ULPI clock" */
+			clocks = <&clk48>;
+		};
+		rngcclk: rngcclk@48M {
+			#clock-cells = <0>;
+			compatible = "st,nomadik-src-clock";
+			clock-id = <63>;
+			clocks = <&clk48>; /* Guess */
+		};
+	};
+
+	/* A NAND flash of 128 MiB */
+	fsmc: flash@40000000 {
+		compatible = "stericsson,fsmc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x10100000 0x1000>,	/* FSMC Register*/
+			<0x40000000 0x2000>,	/* NAND Base DATA */
+			<0x41000000 0x2000>,	/* NAND Base ADDR */
+			<0x40800000 0x2000>;	/* NAND Base CMD */
+		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+		clocks = <&hclksmc>;
+		status = "okay";
+		timings = /bits/ 8 <0 0 0 0x10 0x0a 0>;
+
+		partition@0 {
+		label = "X-Loader(NAND)";
+			reg = <0x0 0x40000>;
+		};
+		partition@40000 {
+			label = "MemInit(NAND)";
+			reg = <0x40000 0x40000>;
+		};
+		partition@80000 {
+			label = "BootLoader(NAND)";
+			reg = <0x80000 0x200000>;
+		};
+		partition@280000 {
+			label = "Kernel zImage(NAND)";
+			reg = <0x280000 0x300000>;
+		};
+		partition@580000 {
+			label = "Root Filesystem(NAND)";
+			reg = <0x580000 0x1600000>;
+		};
+		partition@1b80000 {
+			label = "User Filesystem(NAND)";
+			reg = <0x1b80000 0x6480000>;
+		};
+	};
+
+	/* I2C0 connected to the STw4811 power management chip */
+	i2c0 {
+		compatible = "st,nomadik-i2c", "arm,primecell";
+		reg = <0x101f8000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <20>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&i2c0clk>, <&pclki2c0>;
+		clock-names = "mclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
+
+		stw4811@2d {
+			compatible = "st,stw4811";
+			reg = <0x2d>;
+			vmmc_regulator: vmmc {
+				compatible = "st,stw481x-vmmc";
+				regulator-name = "VMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	/* I2C1 connected to various sensors */
+	i2c1 {
+		compatible = "st,nomadik-i2c", "arm,primecell";
+		reg = <0x101f7000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <21>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&i2c1clk>, <&pclki2c1>;
+		clock-names = "mclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
+
+		camera@2d {
+			   compatible = "st,camera";
+			   reg = <0x10>;
+		};
+		stw5095@1a {
+			   compatible = "st,stw5095";
+			   reg = <0x1a>;
+		};
+		lis3lv02dl@1d {
+			   compatible = "st,lis3lv02dl";
+			   reg = <0x1d>;
+		};
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vica: intc@10140000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140000 0x20>;
+		};
+
+		vicb: intc@10140020 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140020 0x20>;
+		};
+
+		uart0: uart@101fd000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101fd000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <12>;
+			clocks = <&uart0clk>, <&pclkuart0>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_default_mux>;
+		};
+
+		uart1: uart@101fb000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101fb000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <17>;
+			clocks = <&uart1clk>, <&pclkuart1>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_default_mux>;
+		};
+
+		uart2: uart@101f2000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f2000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <28>;
+			clocks = <&uart2clk>, <&pclkuart2>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		rng: rng@101b0000 {
+			compatible = "arm,primecell";
+			reg = <0x101b0000 0x1000>;
+			clocks = <&rngcclk>, <&hclkrng>;
+			clock-names = "rng", "apb_pclk";
+		};
+
+		rtc: rtc@101e8000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x101e8000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			interrupt-parent = <&vica>;
+			interrupts = <10>;
+		};
+
+		mmcsd: sdi@101f6000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x101f6000 0x1000>;
+			clocks = <&sdiclk>, <&pclksdi>;
+			clock-names = "mclk", "apb_pclk";
+			interrupt-parent = <&vica>;
+			interrupts = <22>;
+			max-frequency = <48000000>;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
+			vmmc-supply = <&vmmc_regulator>;
+		};
+	};
+};
diff --git a/src/arm/ste-snowball.dts b/src/arm/ste-snowball.dts
new file mode 100644
index 000000000000..206826a855c0
--- /dev/null
+++ b/src/arm/ste-snowball.dts
@@ -0,0 +1,525 @@
+/*
+ * Copyright 2011 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-dbx5x0.dtsi"
+#include "ste-href-ab8500.dtsi"
+#include "ste-href-family-pinctrl.dtsi"
+
+/ {
+	model = "Calao Systems Snowball platform with device tree";
+	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	en_3v3_reg: en_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-3v3-fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
+		gpio = <&ab8500_gpio 25 0x4>;
+		startup-delay-us = <5000>;
+		enable-active-high;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			linux,code = <2>;
+			label = "userpb";
+			gpios = <&gpio1 0 0x4>;
+		};
+		button@2 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			linux,code = <3>;
+			label = "extkb1";
+			gpios = <&gpio4 23 0x4>;
+		};
+		button@3 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			linux,code = <4>;
+			label = "extkb2";
+			gpios = <&gpio4 24 0x4>;
+		};
+		button@4 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			linux,code = <5>;
+			label = "extkb3";
+			gpios = <&gpio5 1 0x4>;
+		};
+		button@5 {
+			debounce_interval = <50>;
+			wakeup = <1>;
+			linux,code = <6>;
+			label = "extkb4";
+			gpios = <&gpio5 2 0x4>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpioled_snowball_mode>;
+		used-led {
+			label = "user_led";
+			gpios = <&gpio4 14 0x4>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	soc {
+		usb_per5@a03e0000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&musb_default_mode>;
+			pinctrl-1 = <&musb_sleep_mode>;
+		};
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+		};
+
+		msp0: msp@80123000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp0_default_mode>;
+			status = "okay";
+		};
+
+		msp1: msp@80124000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp1_default_mode>;
+			status = "okay";
+		};
+
+		msp2: msp@80117000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&msp2_default_mode>;
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+
+		external-bus@50000000 {
+			status = "okay";
+
+			ethernet@0 {
+				compatible = "smsc,lan9115";
+				reg = <0 0x10000>;
+				interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+				interrupt-parent = <&gpio4>;
+				vdd33a-supply = <&en_3v3_reg>;
+				vddvario-supply = <&db8500_vape_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&eth_snowball_mode>;
+
+				reg-shift = <1>;
+				reg-io-width = <2>;
+				smsc,force-internal-phy;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+
+				clocks = <&prcc_pclk 3 0>;
+			};
+		};
+
+		vmmci: regulator-gpio {
+			gpios = <&gpio7 4 0x4>;
+			enable-gpio = <&gpio6 25 0x4>;
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+			vqmmc-supply = <&vmmci>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi0_default_mode>;
+			pinctrl-1 = <&sdi0_sleep_mode>;
+
+			cd-gpios  = <&gpio6 26 0x4>; // 218
+			cd-inverted;
+
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi1_default_mode>;
+			pinctrl-1 = <&sdi1_sleep_mode>;
+
+			status = "okay";
+		};
+
+		// Unused PoP eMMC - register and put it to sleep by default */
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdi2_sleep_mode>;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdi4_default_mode>;
+			pinctrl-1 = <&sdi4_sleep_mode>;
+
+			status = "okay";
+		};
+
+		uart@80120000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart0_default_mode>;
+			pinctrl-1 = <&uart0_sleep_mode>;
+			status = "okay";
+		};
+
+		uart@80121000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart1_default_mode>;
+			pinctrl-1 = <&uart1_sleep_mode>;
+			status = "okay";
+		};
+
+		uart@80007000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&uart2_default_mode>;
+			pinctrl-1 = <&uart2_sleep_mode>;
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c0_default_mode>;
+			pinctrl-1 = <&i2c0_sleep_mode>;
+		};
+
+		i2c@80122000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c1_default_mode>;
+			pinctrl-1 = <&i2c1_sleep_mode>;
+		};
+
+		i2c@80128000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c2_default_mode>;
+			pinctrl-1 = <&i2c2_sleep_mode>;
+			lsm303dlh@18 {
+				/* Accelerometer */
+				compatible = "st,lsm303dlh-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x18>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_snowball_mode>;
+			};
+			lsm303dlm@1e {
+				/* Magnetometer */
+				compatible = "st,lsm303dlm-magn";
+				reg = <0x1e>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&magneto_snowball_mode>;
+			};
+			l3g4200d@68 {
+				/* Gyroscope */
+				compatible = "st,l3g4200d-gyro";
+				st,drdy-int-pin = <2>;
+				reg = <0x68>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+			lsp001wm@5c {
+				/* Barometer/pressure sensor */
+				compatible = "st,lps001wp-press";
+				reg = <0x5c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+			};
+		};
+
+		i2c@80110000 {
+			pinctrl-names = "default","sleep";
+			pinctrl-0 = <&i2c3_default_mode>;
+			pinctrl-1 = <&i2c3_sleep_mode>;
+		};
+
+		ssp@80002000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ssp0_snowball_mode>;
+		};
+
+		cpufreq-cooling {
+			status = "okay";
+		};
+
+		prcmu@80157000 {
+			cpufreq {
+				status = "okay";
+			};
+
+			thermal@801573c0 {
+				num-trips = <4>;
+
+				trip0-temp = <70000>;
+				trip0-type = "active";
+				trip0-cdev-num = <1>;
+				trip0-cdev-name0 = "thermal-cpufreq-0";
+
+				trip1-temp = <75000>;
+				trip1-type = "active";
+				trip1-cdev-num = <1>;
+				trip1-cdev-name0 = "thermal-cpufreq-0";
+
+				trip2-temp = <80000>;
+				trip2-type = "active";
+				trip2-cdev-num = <1>;
+				trip2-cdev-name0 = "thermal-cpufreq-0";
+
+				trip3-temp = <85000>;
+				trip3-type = "critical";
+				trip3-cdev-num = <0>;
+
+				status = "okay";
+			};
+
+			ab8500 {
+				ab8500-gpio {
+					compatible = "stericsson,ab8500-gpio";
+				};
+
+				ext_regulators: ab8500-ext-regulators {
+					ab8500_ext1_reg: ab8500_ext1 {
+						regulator-name = "ab8500-ext-supply1";
+					};
+
+					ab8500_ext2_reg_reg: ab8500_ext2 {
+						regulator-name = "ab8500-ext-supply2";
+					};
+
+					ab8500_ext3_reg_reg: ab8500_ext3 {
+						regulator-name = "ab8500-ext-supply3";
+					};
+				};
+
+				ab8500-regulators {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
+		};
+
+		pinctrl {
+			/*
+			 * Set this up using hogs, as time goes by and as seems fit, these
+			 * can be moved over to being controlled by respective device.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&gbf_snowball_mode>,
+				  <&wlan_snowball_mode>;
+
+			ethernet {
+				/*
+				 * Mux in "SM" which is used for the
+				 * SMSC911x Ethernet adapter
+				 */
+				eth_snowball_mode: eth_snowball {
+					snowball_mux {
+						function = "sm";
+						groups = "sm_b_1";
+					};
+					/* LAN IRQ pin */
+					snowball_cfg1 {
+						pins = "GPIO140_B11";
+						ste,config = <&in_nopull>;
+					};
+					/* LAN reset pin */
+					snowball_cfg2 {
+						pins = "GPIO141_C12";
+						ste,config = <&gpio_out_hi>;
+					};
+
+				};
+			};
+			sdi0 {
+				sdi0_default_mode: sdi0_default {
+					snowball_mux {
+						function = "mc0";
+						groups = "mc0dat31dir_a_1";
+					};
+					snowball_cfg1 {
+						pins = "GPIO21_AB3"; /* DAT31DIR */
+						ste,config = <&out_hi>;
+					};
+
+				};
+			};
+			ssp0 {
+				ssp0_snowball_mode: ssp0_snowball_default {
+					snowball_mux {
+						function = "ssp0";
+						groups = "ssp0_a_1";
+					};
+					snowball_cfg1 {
+						pins = "GPIO144_B13"; /* FRM */
+						ste,config = <&gpio_out_hi>;
+					};
+					snowball_cfg2 {
+						pins = "GPIO145_C13"; /* RXD */
+						ste,config = <&in_pd>;
+					};
+					snowball_cfg3 {
+						pins =
+						"GPIO146_D13", /* TXD */
+						"GPIO143_D12"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+
+				};
+			};
+			gpio_led {
+				gpioled_snowball_mode: gpioled_default {
+					snowball_cfg1 {
+						pins = "GPIO142_C11";
+						ste,config = <&gpio_out_hi>;
+					};
+
+				};
+			};
+			accelerometer {
+				accel_snowball_mode: accel_snowball {
+					/* Accelerometer lines */
+					snowball_cfg1 {
+						pins =
+						"GPIO163_C20", /* ACCEL_IRQ1 */
+						"GPIO164_B21"; /* ACCEL_IRQ2 */
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			magnetometer {
+				magneto_snowball_mode: magneto_snowball {
+					snowball_cfg1 {
+						pins = "GPIO165_C21"; /* MAG_DRDY */
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			gbf {
+				gbf_snowball_mode: gbf_snowball {
+					/*
+					 * GBF (GPS, Bluetooth, FM-radio) interface,
+					 * pull low to reset state
+					 */
+					snowball_cfg1 {
+						pins = "GPIO171_D23"; /* GBF_ENA_RESET */
+						ste,config = <&gpio_out_lo>;
+					};
+				 };
+			};
+			wlan {
+				wlan_snowball_mode: wlan_snowball {
+					/*
+					 * Activate this mode with the WLAN chip.
+					 * These are plain GPIO pins used by WLAN
+					 */
+					snowball_cfg1 {
+						pins =
+						"GPIO161_D21", /* WLAN_PMU_EN */
+						"GPIO215_AH13"; /* WLAN_ENA */
+						ste,config = <&gpio_out_lo>;
+					};
+					snowball_cfg2 {
+						pins = "GPIO216_AG12"; /* WLAN_IRQ */
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+		};
+
+		mcde@a0350000 {
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&lcd_default_mode>;
+			pinctrl-1 = <&lcd_sleep_mode>;
+		};
+	};
+};
diff --git a/src/arm/ste-u300.dts b/src/arm/ste-u300.dts
new file mode 100644
index 000000000000..82a661677e97
--- /dev/null
+++ b/src/arm/ste-u300.dts
@@ -0,0 +1,473 @@
+/*
+ * Device Tree for the ST-Ericsson U300 Machine and SoC
+ */
+
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "ST-Ericsson U300";
+	compatible = "stericsson,u300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "root=/dev/ram0 console=ttyAMA0,115200n8 earlyprintk";
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+        };
+
+	memory {
+		reg = <0x48000000 0x03c00000>;
+	};
+
+	s365 {
+		compatible = "stericsson,s365";
+		vana15-supply = <&ab3100_ldo_d_reg>;
+		syscon = <&syscon>;
+	};
+
+	syscon: syscon@c0011000 {
+		compatible = "stericsson,u300-syscon", "syscon";
+		reg = <0xc0011000 0x1000>;
+		clk32: app_32_clk@32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+		pll13: pll13@13M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+		/* Slow bridge clocks under PLL13 */
+		slow_clk: slow_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <0>;
+			clocks = <&pll13>;
+		};
+		uart0_clk: uart0_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <1>;
+			clocks = <&slow_clk>;
+		};
+		gpio_clk: gpio_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <4>;
+			clocks = <&slow_clk>;
+		};
+		rtc_clk: rtc_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <6>;
+			clocks = <&slow_clk>;
+		};
+		apptimer_clk: app_tmr_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <7>;
+			clocks = <&slow_clk>;
+		};
+		acc_tmr_clk@13M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <0>; /* Slow */
+			clock-id = <8>;
+			clocks = <&slow_clk>;
+		};
+		pll208: pll208@208M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <208000000>;
+		};
+		app208: app_208_clk@208M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&pll208>;
+		};
+		cpu_clk@208M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <3>;
+			clocks = <&app208>;
+		};
+		app104: app_104_clk@104M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&pll208>;
+		};
+		semi_clk@104M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <9>;
+			clocks = <&app104>;
+		};
+		app52: app_52_clk@52M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll208>;
+		};
+		/* AHB subsystem clocks */
+		ahb_clk: ahb_subsys_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <10>;
+			clocks = <&app52>;
+		};
+		intcon_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <12>;
+			clocks = <&ahb_clk>;
+		};
+		emif_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <5>;
+			clocks = <&ahb_clk>;
+		};
+		dmac_clk: dmac_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <4>;
+			clocks = <&app52>;
+		};
+		fsmc_clk: fsmc_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <6>;
+			clocks = <&app52>;
+		};
+		xgam_clk: xgam_clk@52M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <2>; /* Rest */
+			clock-id = <8>;
+			clocks = <&app52>;
+		};
+		app26: app_26_clk@26M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <2>;
+			clock-mult = <1>;
+			clocks = <&app52>;
+		};
+		/* Fast bridge  clocks */
+		fast_clk: fast_clk@26M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <1>; /* Fast */
+			clock-id = <0>;
+			clocks = <&app26>;
+		};
+		i2c0_clk: i2c0_clk@26M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <1>; /* Fast */
+			clock-id = <1>;
+			clocks = <&fast_clk>;
+		};
+		i2c1_clk: i2c1_clk@26M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <1>; /* Fast */
+			clock-id = <2>;
+			clocks = <&fast_clk>;
+		};
+		mmc_pclk: mmc_p_clk@26M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <1>; /* Fast */
+			clock-id = <5>;
+			clocks = <&fast_clk>;
+		};
+		mmc_mclk: mmc_mclk {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-mclk";
+			clocks = <&mmc_pclk>;
+		};
+		spi_clk: spi_p_clk@26M {
+			#clock-cells = <0>;
+			compatible = "stericsson,u300-syscon-clk";
+			clock-type = <1>; /* Fast */
+			clock-id = <6>;
+			clocks = <&fast_clk>;
+		};
+	};
+
+	timer: timer@c0014000 {
+		compatible = "stericsson,u300-apptimer";
+		reg = <0xc0014000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <24 25 26 27>;
+		clocks = <&apptimer_clk>;
+	};
+
+	gpio: gpio@c0016000 {
+		compatible = "stericsson,gpio-coh901";
+		reg = <0xc0016000 0x1000>;
+		interrupt-parent = <&vicb>;
+		interrupts = <0 1 2 18 21 22 23>;
+		clocks = <&gpio_clk>;
+		interrupt-names = "gpio0", "gpio1", "gpio2", "gpio3",
+				"gpio4", "gpio5", "gpio6";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pinctrl: pinctrl@c0011000 {
+		compatible = "stericsson,pinctrl-u300";
+		reg = <0xc0011000 0x1000>;
+	};
+
+	watchdog: watchdog@c0012000 {
+		compatible = "stericsson,coh901327";
+		reg = <0xc0012000 0x1000>;
+		interrupt-parent = <&vicb>;
+		interrupts = <3>;
+		clocks = <&clk32>;
+	};
+
+	rtc: rtc@c0017000 {
+		compatible = "stericsson,coh901331";
+		reg = <0xc0017000 0x1000>;
+		interrupt-parent = <&vicb>;
+		interrupts = <10>;
+		clocks = <&rtc_clk>;
+	};
+
+	dmac: dma-controller@c00020000 {
+		compatible = "stericsson,coh901318";
+		reg = <0xc0020000 0x1000>;
+		interrupt-parent = <&vica>;
+		interrupts = <2>;
+		#dma-cells = <1>;
+		dma-channels = <40>;
+		clocks = <&dmac_clk>;
+	};
+
+	/* A NAND flash of 128 MiB */
+	fsmc: flash@40000000 {
+		compatible = "stericsson,fsmc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x9f800000 0x1000>,	/* FSMC Register*/
+			<0x80000000 0x4000>,	/* NAND Base DATA */
+			<0x80020000 0x4000>,	/* NAND Base ADDR */
+			<0x80010000 0x4000>;	/* NAND Base CMD */
+		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
+		nand-skip-bbtscan;
+		clocks = <&fsmc_clk>;
+
+		partition@0 {
+		label = "boot records";
+			reg = <0x0 0x20000>;
+		};
+		partition@20000 {
+			label = "free";
+			reg = <0x20000 0x7e0000>;
+		};
+		partition@800000 {
+			label = "platform";
+			reg = <0x800000 0xf800000>;
+		};
+	};
+
+	i2c0: i2c@c0004000 {
+		compatible = "st,ddci2c";
+		reg = <0xc0004000 0x1000>;
+		interrupt-parent = <&vicb>;
+		interrupts = <8>;
+		clocks = <&i2c0_clk>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ab3100: ab3100@48 {
+			compatible = "stericsson,ab3100";
+			reg = <0x48>;
+			interrupt-parent = <&vica>;
+			interrupts = <0>; /* EXT0 IRQ */
+			ab3100-regulators {
+				compatible = "stericsson,ab3100-regulators";
+				ab3100_ldo_a_reg: ab3100_ldo_a {
+					regulator-compatible = "ab3100_ldo_a";
+					startup-delay-us = <200>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+				ab3100_ldo_c_reg: ab3100_ldo_c {
+					regulator-compatible = "ab3100_ldo_c";
+					startup-delay-us = <200>;
+				};
+				ab3100_ldo_d_reg: ab3100_ldo_d {
+					regulator-compatible = "ab3100_ldo_d";
+					startup-delay-us = <200>;
+				};
+				ab3100_ldo_e_reg: ab3100_ldo_e {
+					regulator-compatible = "ab3100_ldo_e";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					startup-delay-us = <200>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+				ab3100_ldo_f_reg: ab3100_ldo_f {
+					regulator-compatible = "ab3100_ldo_f";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					startup-delay-us = <600>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+				ab3100_ldo_g_reg: ab3100_ldo_g {
+					regulator-compatible = "ab3100_ldo_g";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2850000>;
+					startup-delay-us = <400>;
+				};
+				ab3100_ldo_h_reg: ab3100_ldo_h {
+					regulator-compatible = "ab3100_ldo_h";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <2750000>;
+					startup-delay-us = <200>;
+				};
+				ab3100_ldo_k_reg: ab3100_ldo_k {
+					regulator-compatible = "ab3100_ldo_k";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2750000>;
+					startup-delay-us = <200>;
+				};
+				ab3100_ext_reg: ab3100_ext {
+					regulator-compatible = "ab3100_ext";
+				};
+				ab3100_buck_reg: ab3100_buck {
+					regulator-compatible = "ab3100_buck";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1800000>;
+					startup-delay-us = <1000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	i2c1: i2c@c0005000 {
+		compatible = "st,ddci2c";
+		reg = <0xc0005000 0x1000>;
+		interrupt-parent = <&vicb>;
+		interrupts = <9>;
+		clocks = <&i2c1_clk>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		fwcam0: fwcam@10 {
+			reg = <0x10>;
+		};
+		fwcam1: fwcam@5d {
+			reg = <0x5d>;
+		};
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vica: interrupt-controller@a0001000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xa0001000 0x20>;
+		};
+
+		vicb: interrupt-controller@a0002000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xa0002000 0x20>;
+		};
+
+		uart0: serial@c0013000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xc0013000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <22>;
+			clocks = <&uart0_clk>, <&uart0_clk>;
+			clock-names = "apb_pclk", "uart0_clk";
+			dmas = <&dmac 17 &dmac 18>;
+			dma-names = "tx", "rx";
+		};
+
+		uart1: serial@c0007000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xc0007000 0x1000>;
+			interrupt-parent = <&vicb>;
+			interrupts = <20>;
+			dmas = <&dmac 38 &dmac 39>;
+			dma-names = "tx", "rx";
+		};
+
+		mmcsd: mmcsd@c0001000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0xc0001000 0x1000>;
+			interrupt-parent = <&vicb>;
+			interrupts = <6 7>;
+			clocks = <&mmc_pclk>, <&mmc_mclk>;
+			clock-names = "apb_pclk", "mclk";
+			max-frequency = <24000000>;
+			bus-width = <4>; // SD-card slot
+			cap-mmc-highspeed;
+			cap-sd-highspeed;
+			cd-gpios = <&gpio 12 0x4>;
+			cd-inverted;
+			vmmc-supply = <&ab3100_ldo_g_reg>;
+			dmas = <&dmac 14>;
+			dma-names = "rx";
+		};
+
+		spi: ssp@c0006000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xc0006000 0x1000>;
+			interrupt-parent = <&vica>;
+			interrupts = <23>;
+			clocks = <&spi_clk>, <&spi_clk>;
+			clock-names = "SSPCLK", "apb_pclk";
+			dmas = <&dmac 27 &dmac 28>;
+			dma-names = "tx", "rx";
+			num-cs = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			spi-dummy@1 {
+				compatible = "arm,pl022-dummy";
+				reg = <1>;
+				spi-max-frequency = <20000000>;
+			};
+		};
+	};
+};
diff --git a/src/arm/stih407-b2120.dts b/src/arm/stih407-b2120.dts
new file mode 100644
index 000000000000..af487145cd89
--- /dev/null
+++ b/src/arm/stih407-b2120.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stihxxx-b2120.dtsi"
+#include "stih407.dtsi"
+/ {
+	model = "STiH407 B2120";
+	compatible = "st,stih407-b2120", "st,stih407";
+
+	chosen {
+		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
+		linux,stdout-path = &sbc_serial0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	aliases {
+		ttyAS0 = &sbc_serial0;
+	};
+
+};
diff --git a/src/arm/stih407-clock.dtsi b/src/arm/stih407-clock.dtsi
new file mode 100644
index 000000000000..e65744fc12ab
--- /dev/null
+++ b/src/arm/stih407-clock.dtsi
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <dt-bindings/clock/stih407-clks.h>
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed 30MHz oscillator inputs to SoC
+		 */
+		clk_sysin: clk-sysin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: clk-m-a9-periphs {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+
+			clocks = <&clk_m_a9>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9@92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9@92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+
+			clocks = <&clk_s_c0_flexgen 13>;
+
+			clock-output-names = "clk-m-a9-ext2f-div2";
+
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * Bootloader initialized system infrastructure clock for
+		 * serial devices.
+		 */
+		clk_ext2f_a9: clockgen-c0@13 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			clock-output-names = "clk-s-icn-reg-0";
+		};
+
+		clockgen-a@090ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0";
+			};
+		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+		};
+
+		clk_s_c0: clockgen-c@09103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-proc-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-ext2fa9",
+						     "clk-ic-bdisp-0",
+						     "clk-ic-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-disp-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phy",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp";
+			};
+		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0@09104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clockgen-d2@x9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "clk-pix-pip",
+						     "clk-pix-gdp1",
+						     "clk-pix-gdp2",
+						     "clk-pix-gdp3",
+						     "clk-pix-gdp4",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "clk-tmds-hdmi",
+						     "clk-ref-hdmiphy";
+						     };
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3@9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
+	};
+};
diff --git a/src/arm/stih407-family.dtsi b/src/arm/stih407-family.dtsi
new file mode 100644
index 000000000000..c06a54681912
--- /dev/null
+++ b/src/arm/stih407-family.dtsi
@@ -0,0 +1,340 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-pinctrl.dtsi"
+#include <dt-bindings/reset-controller/stih407-resets.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	intc: interrupt-controller@08761000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+	};
+
+	scu@08760000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x08760000 0x1000>;
+	};
+
+	timer@08760200 {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x08760200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&arm_periph_clk>;
+	};
+
+	l2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0x08762000 0x1000>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible = "simple-bus";
+
+		powerdown: powerdown-controller {
+			compatible = "st,stih407-powerdown";
+			#reset-cells = <1>;
+		};
+
+		softreset: softreset-controller {
+			compatible = "st,stih407-softreset";
+			#reset-cells = <1>;
+		};
+
+		picophyreset: picophyreset-controller {
+			compatible = "st,stih407-picophyreset";
+			#reset-cells = <1>;
+		};
+
+		syscfg_sbc: sbc-syscfg@9620000 {
+			compatible = "st,stih407-sbc-syscfg", "syscon";
+			reg = <0x9620000 0x1000>;
+		};
+
+		syscfg_front: front-syscfg@9280000 {
+			compatible = "st,stih407-front-syscfg", "syscon";
+			reg = <0x9280000 0x1000>;
+		};
+
+		syscfg_rear: rear-syscfg@9290000 {
+			compatible = "st,stih407-rear-syscfg", "syscon";
+			reg = <0x9290000 0x1000>;
+		};
+
+		syscfg_flash: flash-syscfg@92a0000 {
+			compatible = "st,stih407-flash-syscfg", "syscon";
+			reg = <0x92a0000 0x1000>;
+		};
+
+		syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
+			compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+			reg = <0x9600000 0x1000>;
+		};
+
+		syscfg_core: core-syscfg@92b0000 {
+			compatible = "st,stih407-core-syscfg", "syscon";
+			reg = <0x92b0000 0x1000>;
+		};
+
+		syscfg_lpm: lpm-syscfg@94b5100 {
+			compatible = "st,stih407-lpm-syscfg", "syscon";
+			reg = <0x94b5100 0x1000>;
+		};
+
+		serial@9830000 {
+			compatible = "st,asc";
+			reg = <0x9830000 0x2c>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial0>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		serial@9831000 {
+			compatible = "st,asc";
+			reg = <0x9831000 0x2c>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial1>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		serial@9832000 {
+			compatible = "st,asc";
+			reg = <0x9832000 0x2c>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_serial2>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+			status = "disabled";
+		};
+
+		/* SBC_ASC0 - UART10 */
+		sbc_serial0: serial@9530000 {
+			compatible = "st,asc";
+			reg = <0x9530000 0x2c>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial0>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		serial@9531000 {
+			compatible = "st,asc";
+			reg = <0x9531000 0x2c>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sbc_serial1>;
+			clocks = <&clk_sysin>;
+
+			status = "disabled";
+		};
+
+		i2c@9840000 {
+			compatible = "st,comms-ssc4-i2c";
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x9840000 0x110>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c0_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9841000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c1_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9842000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c2_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9843000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c3_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9844000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9845000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9845000 0x110>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c5_default>;
+
+			status = "disabled";
+		};
+
+
+		/* SSCs on SBC */
+		i2c@9540000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c10_default>;
+
+			status = "disabled";
+		};
+
+		i2c@9541000 {
+			compatible = "st,comms-ssc4-i2c";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c11_default>;
+
+			status = "disabled";
+		};
+
+		usb2_picophy0: phy1 {
+			compatible = "st,stih407-usb2-phy";
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0x100 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY0_RESET>;
+			reset-names = "global", "port";
+		};
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+			compatible = "st,miphy28lp-phy";
+			st,syscfg = <&syscfg_core>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+
+			phy_port0: port@9b22000 {
+				reg = <0x9b22000 0xff>,
+				      <0x9b09000 0xff>,
+				      <0x9b04000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x114 0x818 0xe0 0xec>;
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
+			};
+
+			phy_port1: port@9b2a000 {
+				reg = <0x9b2a000 0xff>,
+				      <0x9b19000 0xff>,
+				      <0x9b14000 0xff>;
+				reg-names = "sata-up",
+					    "pcie-up",
+					    "pipew";
+
+				st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
+			};
+
+			phy_port2: port@8f95000 {
+				reg = <0x8f95000 0xff>,
+				      <0x8f90000 0xff>;
+				reg-names = "pipew",
+					    "usb3-up";
+
+				st,syscfg = <0x11c 0x820>;
+
+				#phy-cells = <1>;
+
+				reset-names = "miphy-sw-rst";
+				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
+			};
+		};
+	};
+};
diff --git a/src/arm/stih407-pinctrl.dtsi b/src/arm/stih407-pinctrl.dtsi
new file mode 100644
index 000000000000..402844cb3152
--- /dev/null
+++ b/src/arm/stih407-pinctrl.dtsi
@@ -0,0 +1,615 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+	aliases {
+		/* 0-5: PIO_SBC */
+		gpio0 = &pio0;
+		gpio1 = &pio1;
+		gpio2 = &pio2;
+		gpio3 = &pio3;
+		gpio4 = &pio4;
+		gpio5 = &pio5;
+		/* 10-19: PIO_FRONT0 */
+		gpio6 = &pio10;
+		gpio7 = &pio11;
+		gpio8 = &pio12;
+		gpio9 = &pio13;
+		gpio10 = &pio14;
+		gpio11 = &pio15;
+		gpio12 = &pio16;
+		gpio13 = &pio17;
+		gpio14 = &pio18;
+		gpio15 = &pio19;
+		/* 20: PIO_FRONT1 */
+		gpio16 = &pio20;
+		/* 30-35: PIO_REAR */
+		gpio17 = &pio30;
+		gpio18 = &pio31;
+		gpio19 = &pio32;
+		gpio20 = &pio33;
+		gpio21 = &pio34;
+		gpio22 = &pio35;
+		/* 40-42: PIO_FLASH */
+		gpio23 = &pio40;
+		gpio24 = &pio41;
+		gpio25 = &pio42;
+	};
+
+	soc {
+		pin-controller-sbc {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-sbc-pinctrl";
+			st,syscfg = <&syscfg_sbc>;
+			reg = <0x0961f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09610000 0x6000>;
+
+			pio0: gpio@09610000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO0";
+			};
+			pio1: gpio@09611000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO1";
+			};
+			pio2: gpio@09612000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO2";
+			};
+			pio3: gpio@09613000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO3";
+			};
+			pio4: gpio@09614000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO4";
+			};
+
+			pio5: gpio@09615000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO5";
+			};
+
+			rc {
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&pio4 0 ALT2 IN>;
+					};
+				};
+			};
+
+			/* SBC_ASC0 - UART10 */
+			sbc_serial0 {
+				pinctrl_sbc_serial0: sbc_serial0-0 {
+					st,pins {
+						tx = <&pio3 4 ALT1 OUT>;
+						rx = <&pio3 5 ALT1 IN>;
+					};
+				};
+			};
+			/* SBC_ASC1 - UART11 */
+			sbc_serial1 {
+				pinctrl_sbc_serial1: sbc_serial1-0 {
+					st,pins {
+						tx = <&pio2 6 ALT3 OUT>;
+						rx = <&pio2 7 ALT3 IN>;
+					};
+				};
+			};
+
+			i2c10 {
+				pinctrl_i2c10_default: i2c10-default {
+					st,pins {
+						sda = <&pio4 6 ALT1 BIDIR>;
+						scl = <&pio4 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c11 {
+				pinctrl_i2c11_default: i2c11-default {
+					st,pins {
+						sda = <&pio5 1 ALT1 BIDIR>;
+						scl = <&pio5 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&pio4 0 ALT6 IN>;
+						keyin1 = <&pio4 5 ALT4 IN>;
+						keyin2 = <&pio0 4 ALT2 IN>;
+						keyin3 = <&pio2 6 ALT2 IN>;
+
+						keyout0 = <&pio4 6 ALT4 OUT>;
+						keyout1 = <&pio1 7 ALT2 OUT>;
+						keyout2 = <&pio0 6 ALT2 OUT>;
+						keyout3 = <&pio2 7 ALT2 OUT>;
+					};
+				};
+			};
+
+			gmac1 {
+				/*
+				 * Almost all the boards based on STiH407 SoC have an embedded
+				 * switch where the mdio/mdc have been used for managing the SMI
+				 * iface via I2C. For this reason these lines can be allocated
+				 * by using dedicated configuration (in case of there will be a
+				 * standard PHY transceiver on-board).
+				 */
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+
+						txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
+						rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>;
+						clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>;
+					};
+				};
+
+				pinctrl_rgmii1_mdio: rgmii1-mdio {
+					st,pins {
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+					};
+				};
+
+				pinctrl_mii1: mii1 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+						mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+						mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+						rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+			};
+
+			pwm1 {
+				pinctrl_pwm1_chan0_default: pwm1-0-default {
+					st,pins {
+						pwm-out = <&pio3 0 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan1_default: pwm1-1-default {
+					st,pins {
+						pwm-out = <&pio4 4 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan2_default: pwm1-2-default {
+					st,pins {
+						pwm-out = <&pio4 6 ALT3 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan3_default: pwm1-3-default {
+					st,pins {
+						pwm-out = <&pio4 7 ALT3 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0920f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09200000 0x10000>;
+
+			pio10: pio@09200000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO10";
+			};
+			pio11: pio@09201000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO11";
+			};
+			pio12: pio@09202000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO12";
+			};
+			pio13: pio@09203000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO13";
+			};
+			pio14: pio@09204000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO14";
+			};
+			pio15: pio@09205000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO15";
+			};
+			pio16: pio@09206000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x6000 0x100>;
+				st,bank-name = "PIO16";
+			};
+			pio17: pio@09207000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x7000 0x100>;
+				st,bank-name = "PIO17";
+			};
+			pio18: pio@09208000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x8000 0x100>;
+				st,bank-name = "PIO18";
+			};
+			pio19: pio@09209000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x9000 0x100>;
+				st,bank-name = "PIO19";
+			};
+
+			/* Comms */
+			serial0 {
+				pinctrl_serial0: serial0-0 {
+					st,pins {
+						tx = <&pio17 0 ALT1 OUT>;
+						rx = <&pio17 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial1 {
+				pinctrl_serial1: serial1-0 {
+					st,pins {
+						tx = <&pio16 0 ALT1 OUT>;
+						rx = <&pio16 1 ALT1 IN>;
+					};
+				};
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx = <&pio15 0 ALT1 OUT>;
+						rx = <&pio15 1 ALT1 IN>;
+					};
+				};
+			};
+
+			mmc1 {
+				pinctrl_sd1: sd1-0 {
+					st,pins {
+						sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>;
+						sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>;
+						sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>;
+						sd_led = <&pio16 6 ALT6 OUT>;
+						sd_pwren = <&pio16 7 ALT6 OUT>;
+						sd_cd = <&pio19 0 ALT6 IN>;
+						sd_wp = <&pio19 1 ALT6 IN>;
+					};
+				};
+			};
+
+
+			i2c0 {
+				pinctrl_i2c0_default: i2c0-default {
+					st,pins {
+						sda = <&pio10 6 ALT2 BIDIR>;
+						scl = <&pio10 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c1 {
+				pinctrl_i2c1_default: i2c1-default {
+					st,pins {
+						sda = <&pio11 1 ALT2 BIDIR>;
+						scl = <&pio11 0 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c2 {
+				pinctrl_i2c2_default: i2c2-default {
+					st,pins {
+						sda = <&pio15 6 ALT2 BIDIR>;
+						scl = <&pio15 5 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			i2c3 {
+				pinctrl_i2c3_default: i2c3-default {
+					st,pins {
+						sda = <&pio18 6 ALT1 BIDIR>;
+						scl = <&pio18 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			spi0 {
+				pinctrl_spi0_default: spi0-default {
+					st,pins {
+						mtsr = <&pio12 6 ALT2 BIDIR>;
+						mrst = <&pio12 7 ALT2 BIDIR>;
+						scl = <&pio12 5 ALT2 BIDIR>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front1 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-front-pinctrl";
+			st,syscfg = <&syscfg_front>;
+			reg = <0x0921f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09210000 0x10000>;
+
+			pio20: pio@09210000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO20";
+			};
+		};
+
+		pin-controller-rear {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-rear-pinctrl";
+			st,syscfg = <&syscfg_rear>;
+			reg = <0x0922f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09220000 0x6000>;
+
+			pio30: gpio@09220000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x100>;
+				st,bank-name = "PIO30";
+			};
+			pio31: gpio@09221000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO31";
+			};
+			pio32: gpio@09222000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO32";
+			};
+			pio33: gpio@09223000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x3000 0x100>;
+				st,bank-name = "PIO33";
+			};
+			pio34: gpio@09224000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x4000 0x100>;
+				st,bank-name = "PIO34";
+			};
+			pio35: gpio@09225000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x5000 0x100>;
+				st,bank-name = "PIO35";
+			};
+
+			i2c4 {
+				pinctrl_i2c4_default: i2c4-default {
+					st,pins {
+						sda = <&pio30 1 ALT1 BIDIR>;
+						scl = <&pio30 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c5 {
+				pinctrl_i2c5_default: i2c5-default {
+					st,pins {
+						sda = <&pio34 4 ALT1 BIDIR>;
+						scl = <&pio34 3 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			usb3 {
+				pinctrl_usb3: usb3-2 {
+					st,pins {
+						usb-oc-detect = <&pio35 4 ALT1 IN>;
+						usb-pwr-enable = <&pio35 5 ALT1 OUT>;
+						usb-vbus-valid = <&pio35 6 ALT1 IN>;
+					};
+				};
+			};
+
+			pwm0 {
+				pinctrl_pwm0_chan0_default: pwm0-0-default {
+					st,pins {
+						pwm-out = <&pio31 1 ALT1 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-flash {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "st,stih407-flash-pinctrl";
+			st,syscfg = <&syscfg_flash>;
+			reg = <0x0923f080 0x4>;
+			reg-names = "irqmux";
+			interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>;
+			interrupts-names = "irqmux";
+			ranges = <0 0x09230000 0x3000>;
+
+			pio40: gpio@09230000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0 0x100>;
+				st,bank-name = "PIO40";
+			};
+			pio41: gpio@09231000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x100>;
+				st,bank-name = "PIO41";
+			};
+			pio42: gpio@09232000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x100>;
+				st,bank-name = "PIO42";
+			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0-0 {
+					st,pins {
+						emmc_clk = <&pio40 6 ALT1 BIDIR>;
+						emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>;
+						emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>;
+						emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>;
+						emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>;
+						emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>;
+						emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>;
+						emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>;
+						emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>;
+						emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/stih407.dtsi b/src/arm/stih407.dtsi
new file mode 100644
index 000000000000..3efa3b2ebe90
--- /dev/null
+++ b/src/arm/stih407.dtsi
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2015 STMicroelectronics Limited.
+ * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-clock.dtsi"
+#include "stih407-family.dtsi"
+/ {
+	soc {
+		/* Display */
+		vtg_main: sti-vtg-main@8d02800 {
+			compatible = "st,vtg";
+			reg = <0x8d02800 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+		};
+
+		vtg_aux: sti-vtg-aux@8d00200 {
+			compatible = "st,vtg";
+			reg = <0x8d00200 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+		};
+
+		sti-display-subsystem {
+			compatible = "st,sti-display-subsystem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
+
+			assigned-clock-parents = <0>,
+						 <0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>;
+
+			assigned-clock-rates = <297000000>, <297000000>;
+
+			ranges;
+
+			sti-compositor@9d11000 {
+				compatible = "st,stih407-compositor";
+				reg = <0x9d11000 0x1000>;
+
+				clock-names = "compo_main",
+					      "compo_aux",
+					      "pix_main",
+					      "pix_aux",
+					      "pix_gdp1",
+					      "pix_gdp2",
+					      "pix_gdp3",
+					      "pix_gdp4",
+					      "main_parent",
+					      "aux_parent";
+
+				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+
+				reset-names = "compo-main", "compo-aux";
+				resets = <&softreset STIH407_COMPO_SOFTRESET>,
+					 <&softreset STIH407_COMPO_SOFTRESET>;
+				st,vtg = <&vtg_main>, <&vtg_aux>;
+			};
+
+			sti-tvout@8d08000 {
+				compatible = "st,stih407-tvout";
+				reg = <0x8d08000 0x1000>;
+				reg-names = "tvout-reg";
+				reset-names = "tvout";
+				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+						  <&clk_s_d0_flexgen CLK_PCM_0>,
+						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+						  <&clk_s_d2_flexgen CLK_HDDAC>;
+
+				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
+							 <&clk_tmdsout_hdmi>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d0_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>;
+				ranges;
+
+				sti-hdmi@8d04000 {
+					compatible = "st,stih407-hdmi";
+					reg = <0x8d04000 0x1000>;
+					reg-names = "hdmi-reg";
+					interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+					interrupt-names	= "irq";
+					clock-names = "pix",
+						      "tmds",
+						      "phy",
+						      "audio",
+						      "main_parent",
+						      "aux_parent";
+
+					clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+						 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+						 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+						 <&clk_s_d0_flexgen CLK_PCM_0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>;
+
+					hdmi,hpd-gpio = <&pio5 3>;
+					reset-names = "hdmi";
+					resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+					ddc = <&hdmiddc>;
+
+				};
+
+				sti-hda@8d02000 {
+					compatible = "st,stih407-hda";
+					reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+					reg-names = "hda-reg", "video-dacs-ctrl";
+					clock-names = "pix",
+						      "hddac",
+						      "main_parent",
+						      "aux_parent";
+					clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+						 <&clk_s_d2_flexgen CLK_HDDAC>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/stih410-b2120.dts b/src/arm/stih410-b2120.dts
new file mode 100644
index 000000000000..2f61a9960dee
--- /dev/null
+++ b/src/arm/stih410-b2120.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include "stihxxx-b2120.dtsi"
+/ {
+	model = "STiH410 B2120";
+	compatible = "st,stih410-b2120", "st,stih410";
+
+	chosen {
+		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
+		linux,stdout-path = &sbc_serial0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	aliases {
+		ttyAS0 = &sbc_serial0;
+	};
+};
diff --git a/src/arm/stih410-clock.dtsi b/src/arm/stih410-clock.dtsi
new file mode 100644
index 000000000000..6b5803a30096
--- /dev/null
+++ b/src/arm/stih410-clock.dtsi
@@ -0,0 +1,338 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <dt-bindings/clock/stih410-clks.h>
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		compatible = "st,stih410-clk", "simple-bus";
+
+		/*
+		 * Fixed 30MHz oscillator inputs to SoC
+		 */
+		clk_sysin: clk-sysin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+			clock-output-names = "CLK_SYSIN";
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: clk-m-a9-periphs {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a9>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9@92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9@92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+
+			clocks = <&clk_s_c0_flexgen 13>;
+
+			clock-output-names = "clk-m-a9-ext2f-div2";
+
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * Bootloader initialized system infrastructure clock for
+		 * serial devices.
+		 */
+		clk_ext2f_a9: clockgen-c0@13 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			clock-output-names = "clk-s-icn-reg-0";
+		};
+
+		clockgen-a@090ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0",
+						     "clk-ic-lmi1";
+			};
+		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+		};
+
+		clk_s_c0: clockgen-c@09103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-proc-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-ext2fa9",
+						     "clk-ic-bdisp-0",
+						     "clk-ic-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-disp-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phy",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp",
+						     "clk-tx-icn-hades",
+						     "clk-rx-icn-hades",
+						     "clk-icn-reg-16",
+						     "clk-pp-hades",
+						     "clk-clust-hades",
+						     "clk-hwpe-hades",
+						     "clk-fc-hades";
+			};
+		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0@09104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff",
+						     "clk-pcmr10-master",
+						     "clk-usb2-phy";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clockgen-d2@x9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "clk-pix-pip",
+						     "clk-pix-gdp1",
+						     "clk-pix-gdp2",
+						     "clk-pix-gdp3",
+						     "clk-pix-gdp4",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "clk-tmds-hdmi",
+						     "clk-ref-hdmiphy";
+						     };
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3@9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
+	};
+};
diff --git a/src/arm/stih410-pinctrl.dtsi b/src/arm/stih410-pinctrl.dtsi
new file mode 100644
index 000000000000..b3e9dfc81c07
--- /dev/null
+++ b/src/arm/stih410-pinctrl.dtsi
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+/ {
+
+	soc {
+		pin-controller-rear {
+
+			usb0 {
+				pinctrl_usb0: usb2-0 {
+					st,pins {
+						usb-oc-detect = <&pio35 0 ALT1 IN>;
+						usb-pwr-enable = <&pio35 1 ALT1 OUT>;
+					};
+				};
+			};
+
+			usb1 {
+				pinctrl_usb1: usb2-1 {
+					st,pins {
+						usb-oc-detect = <&pio35 2 ALT1 IN>;
+						usb-pwr-enable = <&pio35 3 ALT1 OUT>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/stih410.dtsi b/src/arm/stih410.dtsi
new file mode 100644
index 000000000000..208b5e89036a
--- /dev/null
+++ b/src/arm/stih410.dtsi
@@ -0,0 +1,222 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih410-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stih410-pinctrl.dtsi"
+/ {
+	soc {
+		usb2_picophy1: phy2 {
+			compatible = "st,stih407-usb2-phy";
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xf8 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY0_RESET>;
+			reset-names = "global", "port";
+		};
+
+		usb2_picophy2: phy3 {
+			compatible = "st,stih407-usb2-phy";
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xfc 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY1_RESET>;
+			reset-names = "global", "port";
+		};
+
+		ohci0: usb@9a03c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a03c00 0x100>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+		};
+
+		ehci0: usb@9a03e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a03e00 0x100>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+		};
+
+		ohci1: usb@9a83c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a83c00 0x100>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+		};
+
+		ehci1: usb@9a83e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a83e00 0x100>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+		};
+
+		/* Display */
+		vtg_main: sti-vtg-main@8d02800 {
+			compatible = "st,vtg";
+			reg = <0x8d02800 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+		};
+
+		vtg_aux: sti-vtg-aux@8d00200 {
+			compatible = "st,vtg";
+			reg = <0x8d00200 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+		};
+
+		sti-display-subsystem {
+			compatible = "st,sti-display-subsystem";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			assigned-clocks	= <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_quadfs 0>,
+					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
+
+			assigned-clock-parents = <0>,
+						 <0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 0>;
+
+			assigned-clock-rates = <297000000>, <297000000>;
+
+			ranges;
+
+			sti-compositor@9d11000 {
+				compatible = "st,stih407-compositor";
+				reg = <0x9d11000 0x1000>;
+
+				clock-names = "compo_main",
+					      "compo_aux",
+					      "pix_main",
+					      "pix_aux",
+					      "pix_gdp1",
+					      "pix_gdp2",
+					      "pix_gdp3",
+					      "pix_gdp4",
+					      "main_parent",
+					      "aux_parent";
+
+				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
+					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
+					 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
+					 <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>;
+
+				reset-names = "compo-main", "compo-aux";
+				resets = <&softreset STIH407_COMPO_SOFTRESET>,
+					 <&softreset STIH407_COMPO_SOFTRESET>;
+				st,vtg = <&vtg_main>, <&vtg_aux>;
+			};
+
+			sti-tvout@8d08000 {
+				compatible = "st,stih407-tvout";
+				reg = <0x8d08000 0x1000>;
+				reg-names = "tvout-reg";
+				reset-names = "tvout";
+				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+						  <&clk_s_d0_flexgen CLK_PCM_0>,
+						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+						  <&clk_s_d2_flexgen CLK_HDDAC>;
+
+				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
+							 <&clk_tmdsout_hdmi>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d0_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>,
+							 <&clk_s_d2_quadfs 0>;
+				ranges;
+
+				sti-hdmi@8d04000 {
+					compatible = "st,stih407-hdmi";
+					reg = <0x8d04000 0x1000>;
+					reg-names = "hdmi-reg";
+					interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+					interrupt-names	= "irq";
+					clock-names = "pix",
+						      "tmds",
+						      "phy",
+						      "audio",
+						      "main_parent",
+						      "aux_parent";
+
+					clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
+						 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
+						 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
+						 <&clk_s_d0_flexgen CLK_PCM_0>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>;
+
+					hdmi,hpd-gpio = <&pio5 3>;
+					reset-names = "hdmi";
+					resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
+					ddc = <&hdmiddc>;
+
+				};
+
+				sti-hda@8d02000 {
+					compatible = "st,stih407-hda";
+					reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
+					reg-names = "hda-reg", "video-dacs-ctrl";
+					clock-names = "pix",
+						      "hddac",
+						      "main_parent",
+						      "aux_parent";
+					clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
+						 <&clk_s_d2_flexgen CLK_HDDAC>,
+						 <&clk_s_d2_quadfs 0>,
+						 <&clk_s_d2_quadfs 1>;
+				};
+			};
+		};
+	};
+};
diff --git a/src/arm/stih415-b2000.dts b/src/arm/stih415-b2000.dts
new file mode 100644
index 000000000000..bdfbd3765db2
--- /dev/null
+++ b/src/arm/stih415-b2000.dts
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih415.dtsi"
+#include "stih41x-b2000.dtsi"
+/ {
+	model = "STiH415 B2000 Board";
+	compatible = "st,stih415-b2000", "st,stih415";
+};
diff --git a/src/arm/stih415-b2020.dts b/src/arm/stih415-b2020.dts
new file mode 100644
index 000000000000..71903a87bd31
--- /dev/null
+++ b/src/arm/stih415-b2020.dts
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih415.dtsi"
+#include "stih41x-b2020.dtsi"
+/ {
+	model = "STiH415 B2020 Board";
+	compatible = "st,stih415-b2020", "st,stih415";
+};
diff --git a/src/arm/stih415-clock.dtsi b/src/arm/stih415-clock.dtsi
new file mode 100644
index 000000000000..3ee34514bc4b
--- /dev/null
+++ b/src/arm/stih415-clock.dtsi
@@ -0,0 +1,533 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/stih415-clks.h>
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed 30MHz oscillator input to SoC
+		 */
+		clk_sysin: clk-sysin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+		};
+
+		/*
+		 * ClockGenAs on SASG1
+		 */
+		clockgen-a@fee62000 {
+			reg = <0xfee62000 0xb48>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-plls-c65";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll0-hs",
+						     "clk-s-a0-pll0-ls",
+						     "clk-s-a0-pll1";
+			};
+
+			clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c65",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-osc-prediv";
+			};
+
+			clk_s_a0_hs: clk-s-a0-hs {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-hs",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a0_osc_prediv>,
+					 <&clk_s_a0_pll 0>, /* PLL0 HS */
+					 <&clk_s_a0_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-fdma-0",
+						     "clk-s-fdma-1",
+						     ""; /* clk-s-jit-sense */
+						     /* Fourth output unused */
+			};
+
+			clk_s_a0_ls: clk-s-a0-ls {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-ls",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a0_osc_prediv>,
+					 <&clk_s_a0_pll 1>, /* PLL0 LS */
+					 <&clk_s_a0_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-icn-reg-0",
+						     "clk-s-icn-if-0",
+						     "clk-s-icn-reg-lp-0",
+						     "clk-s-emiss",
+						     "clk-s-eth1-phy",
+						     "clk-s-mii-ref-out";
+						 /* Remaining outputs unused */
+			};
+		};
+
+		clockgen-a@fee81000 {
+			reg = <0xfee81000 0xb48>;
+
+			clk_s_a1_pll: clk-s-a1-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-plls-c65";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a1-pll0-hs",
+						     "clk-s-a1-pll0-ls",
+						     "clk-s-a1-pll1";
+			};
+
+			clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c65",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a1-osc-prediv";
+			};
+
+			clk_s_a1_hs: clk-s-a1-hs {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-hs",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a1_osc_prediv>,
+					 <&clk_s_a1_pll 0>, /* PLL0 HS */
+					 <&clk_s_a1_pll 2>; /* PLL1 */
+
+				clock-output-names = "", /* Reserved */
+						     "", /* Reserved */
+						     "clk-s-stac-phy",
+						     "clk-s-vtac-tx-phy";
+			};
+
+			clk_s_a1_ls: clk-s-a1-ls {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-ls",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a1_osc_prediv>,
+					 <&clk_s_a1_pll 1>, /* PLL0 LS */
+					 <&clk_s_a1_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-icn-if-2",
+						     "clk-s-card-mmc",
+						     "clk-s-icn-if-1",
+						     "clk-s-gmac0-phy",
+						     "clk-s-nand-ctrl",
+						     "", /* Reserved */
+						     "clk-s-mii0-ref-out",
+						     ""; /* clk-s-stac-sys */
+						 /* Remaining outputs unused */
+			};
+		};
+
+		/*
+		 * ClockGenAs on MPE41
+		 */
+		clockgen-a@fde12000 {
+			reg = <0xfde12000 0xb50>;
+
+			clk_m_a0_pll0: clk-m-a0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-pll0-phi0",
+						     "clk-m-a0-pll0-phi1",
+						     "clk-m-a0-pll0-phi2",
+						     "clk-m-a0-pll0-phi3";
+			};
+
+			clk_m_a0_pll1: clk-m-a0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-pll1-phi0",
+						     "clk-m-a0-pll1-phi1",
+						     "clk-m-a0-pll1-phi2",
+						     "clk-m-a0-pll1-phi3";
+			};
+
+			clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-osc-prediv";
+			};
+
+			clk_m_a0_div0: clk-m-a0-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "clk-m-apb-pm", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "clk-m-pp-dmu-0",
+						     "clk-m-pp-dmu-1",
+						     "clk-m-icm-disp",
+						     ""; /* Unused */
+			};
+
+			clk_m_a0_div1: clk-m-a0-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "clk-m-a9-ext2f",
+						     "clk-m-st40rt",
+						     "clk-m-st231-dmu-0",
+						     "clk-m-st231-dmu-1",
+						     "clk-m-st231-aud",
+						     "clk-m-st231-gp-0";
+			};
+
+			clk_m_a0_div2: clk-m-a0-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "clk-m-st231-gp-1",
+						     "clk-m-icn-cpu",
+						     "clk-m-icn-stac",
+						     "clk-m-icn-dmu-0",
+						     "clk-m-icn-dmu-1",
+						     "", /* Unused */
+						     "", /* Unused */
+						     ""; /* Unused */
+			};
+
+			clk_m_a0_div3: clk-m-a0-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "clk-m-icn-eram",
+						     "clk-m-a9-trace";
+			};
+		};
+
+		clockgen-a@fd6db000 {
+			reg = <0xfd6db000 0xb50>;
+
+			clk_m_a1_pll0: clk-m-a1-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-pll0-phi0",
+						     "clk-m-a1-pll0-phi1",
+						     "clk-m-a1-pll0-phi2",
+						     "clk-m-a1-pll0-phi3";
+			};
+
+			clk_m_a1_pll1: clk-m-a1-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-pll1-phi0",
+						     "clk-m-a1-pll1-phi1",
+						     "clk-m-a1-pll1-phi2",
+						     "clk-m-a1-pll1-phi3";
+			};
+
+			clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-osc-prediv";
+			};
+
+			clk_m_a1_div0: clk-m-a1-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "clk-m-fdma-12",
+						     "clk-m-fdma-10",
+						     "clk-m-fdma-11",
+						     "clk-m-hva-lmi",
+						     "clk-m-proc-sc",
+						     "clk-m-tp",
+						     "clk-m-icn-gpu",
+						     "clk-m-icn-vdp-0";
+			};
+
+			clk_m_a1_div1: clk-m-a1-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "clk-m-icn-vdp-1",
+						     "clk-m-icn-vdp-2",
+						     "clk-m-icn-vdp-3",
+						     "clk-m-prv-t1-bus",
+						     "clk-m-icn-vdp-4",
+						     "clk-m-icn-reg-10",
+						     "", /* Unused */
+						     ""; /* clk-m-icn-st231 */
+			};
+
+			clk_m_a1_div2: clk-m-a1-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "clk-m-fvdp-proc-alt",
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     ""; /* Unused */
+			};
+
+			clk_m_a1_div3: clk-m-a1-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     ""; /* Unused */
+			};
+		};
+
+		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a0_div1 2>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		clockgen-a@fd345000 {
+			reg = <0xfd345000 0xb50>;
+
+			clk_m_a2_pll0: clk-m-a2-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-pll0-phi0",
+						     "clk-m-a2-pll0-phi1",
+						     "clk-m-a2-pll0-phi2",
+						     "clk-m-a2-pll0-phi3";
+			};
+
+			clk_m_a2_pll1: clk-m-a2-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-pll1-phi0",
+						     "clk-m-a2-pll1-phi1",
+						     "clk-m-a2-pll1-phi2",
+						     "clk-m-a2-pll1-phi3";
+			};
+
+			clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-osc-prediv";
+			};
+
+			clk_m_a2_div0: clk-m-a2-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "clk-m-vtac-main-phy",
+						     "clk-m-vtac-aux-phy",
+						     "clk-m-stac-phy",
+						     "clk-m-stac-sys",
+						     "", /* clk-m-mpestac-pg */
+						     "", /* clk-m-mpestac-wc */
+						     "", /* clk-m-mpevtacaux-pg*/
+						     ""; /* clk-m-mpevtacmain-pg*/
+			};
+
+			clk_m_a2_div1: clk-m-a2-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "", /* clk-m-mpevtacrx0-wc */
+						     "", /* clk-m-mpevtacrx1-wc */
+						     "clk-m-compo-main",
+						     "clk-m-compo-aux",
+						     "clk-m-bdisp-0",
+						     "clk-m-bdisp-1",
+						     "clk-m-icn-bdisp-0",
+						     "clk-m-icn-bdisp-1";
+			};
+
+			clk_m_a2_div2: clk-m-a2-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "", /* clk-m-icn-hqvdp0 */
+						     "", /* clk-m-icn-hqvdp1 */
+						     "clk-m-icn-compo",
+						     "", /* clk-m-icn-vdpaux */
+						     "clk-m-icn-ts",
+						     "clk-m-icn-reg-lp-10",
+						     "clk-m-dcephy-impctrl",
+						     ""; /* Unused */
+			};
+
+			clk_m_a2_div3: clk-m-a2-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = ""; /* Unused */
+						/* Remaining outputs unused */
+			};
+		};
+
+		/*
+		 * A9 PLL
+		 */
+		clockgen-a9@fdde00d8 {
+			reg = <0xfdde00d8 0x70>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks
+		 */
+		clk_m_a9: clk-m-a9@fdde00d8 {
+			#clock-cells = <0>;
+			compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0xfdde00d8 0x4>;
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_m_a0_div1 2>,
+				 <&clk_m_a9_ext2f_div2>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: clk-m-a9-periphs {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a9>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+};
diff --git a/src/arm/stih415-pinctrl.dtsi b/src/arm/stih415-pinctrl.dtsi
new file mode 100644
index 000000000000..3791ad95dbaf
--- /dev/null
+++ b/src/arm/stih415-pinctrl.dtsi
@@ -0,0 +1,545 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+	aliases {
+		gpio0	= &pio0;
+		gpio1	= &pio1;
+		gpio2	= &pio2;
+		gpio3	= &pio3;
+		gpio4	= &pio4;
+		gpio5	= &pio5;
+		gpio6	= &pio6;
+		gpio7	= &pio7;
+		gpio8	= &pio8;
+		gpio9	= &pio9;
+		gpio10	= &pio10;
+		gpio11	= &pio11;
+		gpio12	= &pio12;
+		gpio13	= &pio13;
+		gpio14	= &pio14;
+		gpio15	= &pio15;
+		gpio16	= &pio16;
+		gpio17	= &pio17;
+		gpio18	= &pio18;
+		gpio19	= &pio100;
+		gpio20	= &pio101;
+		gpio21	= &pio102;
+		gpio22	= &pio103;
+		gpio23	= &pio104;
+		gpio24	= &pio105;
+		gpio25	= &pio106;
+		gpio26	= &pio107;
+	};
+
+	soc {
+		pin-controller-sbc {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih415-sbc-pinctrl";
+			st,syscfg	= <&syscfg_sbc>;
+			reg 		= <0xfe61f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
+			ranges 		= <0 0xfe610000 0x5000>;
+
+			pio0: gpio@fe610000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO0";
+			};
+			pio1: gpio@fe611000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO1";
+			};
+			pio2: gpio@fe612000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO2";
+			};
+			pio3: gpio@fe613000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO3";
+			};
+			pio4: gpio@fe614000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO4";
+			};
+
+			sbc_serial1 {
+				pinctrl_sbc_serial1:sbc_serial1 {
+					st,pins {
+						tx	= <&pio2 6 ALT3 OUT>;
+						rx	= <&pio2 7 ALT3 IN>;
+					};
+				};
+			};
+
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&pio0 2 ALT2 IN>;
+						keyin1 = <&pio0 3 ALT2 IN>;
+						keyin2 = <&pio0 4 ALT2 IN>;
+						keyin3 = <&pio2 6 ALT2 IN>;
+
+						keyout0 = <&pio1 6 ALT2 OUT>;
+						keyout1 = <&pio1 7 ALT2 OUT>;
+						keyout2 = <&pio0 6 ALT2 OUT>;
+						keyout3 = <&pio2 7 ALT2 OUT>;
+					};
+				};
+			};
+
+			sbc_i2c0 {
+				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
+					st,pins {
+						sda = <&pio4 6 ALT1 BIDIR>;
+						scl = <&pio4 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			sbc_i2c1 {
+				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
+					st,pins {
+						sda = <&pio3 2 ALT2 BIDIR>;
+						scl = <&pio3 1 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			rc{
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&pio4 0 ALT2 IN>;
+					};
+				};
+			};
+
+			gmac1 {
+				pinctrl_mii1: mii1 {
+						st,pins {
+						 txd0   = <&pio0 0 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txd1   = <&pio0 1 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txd2   = <&pio0 2 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txd3   = <&pio0 3 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txer   = <&pio0 4 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txen   = <&pio0 5 ALT1 OUT  SE_NICLK_IO	0	CLK_A>;
+						 txclk  = <&pio0 6 ALT1 IN   NICLK	0	CLK_A>;
+						 col    = <&pio0 7 ALT1 IN   BYPASS	1000>;
+						 mdio   = <&pio1 0 ALT1 OUT  BYPASS	0>;
+						 mdc    = <&pio1 1 ALT1 OUT  NICLK	0	CLK_A>;
+						 crs    = <&pio1 2 ALT1 IN   BYPASS	1000>;
+						 mdint  = <&pio1 3 ALT1 IN   BYPASS	0>;
+						 rxd0   = <&pio1 4 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxd1   = <&pio1 5 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxd2   = <&pio1 6 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxd3   = <&pio1 7 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxdv   = <&pio2 0 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rx_er  = <&pio2 1 ALT1 IN   SE_NICLK_IO	0	CLK_A>;
+						 rxclk  = <&pio2 2 ALT1 IN   NICLK	0	CLK_A>;
+						 phyclk = <&pio2 3 ALT1 IN   NICLK	1000	CLK_A>;
+					};
+				};
+
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+						 txd0 =	 <&pio0 0 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txd1 =	 <&pio0 1 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txd2 =	 <&pio0 2 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txd3 =	 <&pio0 3 ALT1 OUT DE_IO	1000	CLK_A>;
+						 txen =	 <&pio0 5 ALT1 OUT DE_IO	0	CLK_A>;
+						 txclk = <&pio0 6 ALT1 IN	NICLK	0	CLK_A>;
+						 mdio =	 <&pio1 0 ALT1 OUT	BYPASS	0>;
+						 mdc =	 <&pio1 1 ALT1 OUT	NICLK	0	CLK_A>;
+						 rxd0 =	 <&pio1 4 ALT1 IN DE_IO	0	CLK_A>;
+						 rxd1 =	 <&pio1 5 ALT1 IN DE_IO	0	CLK_A>;
+						 rxd2 =	 <&pio1 6 ALT1 IN DE_IO	0	CLK_A>;
+						 rxd3 =	 <&pio1 7 ALT1 IN DE_IO	0	CLK_A>;
+
+						 rxdv =	  <&pio2 0 ALT1 IN DE_IO	500	CLK_A>;
+						 rxclk =  <&pio2 2 ALT1 IN	NICLK	0	CLK_A>;
+						 phyclk = <&pio2 3 ALT4 OUT	NICLK	0	CLK_B>;
+
+						 clk125= <&pio3 7 ALT4 IN 	NICLK	0	CLK_A>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih415-front-pinctrl";
+			st,syscfg	= <&syscfg_front>;
+			reg 		= <0xfee0f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
+			ranges		= <0 0xfee00000 0x8000>;
+
+			pio5: gpio@fee00000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO5";
+			};
+			pio6: gpio@fee01000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO6";
+			};
+			pio7: gpio@fee02000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO7";
+			};
+			pio8: gpio@fee03000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO8";
+			};
+			pio9: gpio@fee04000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO9";
+			};
+			pio10: gpio@fee05000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x5000 0x100>;
+				st,bank-name	= "PIO10";
+			};
+			pio11: gpio@fee06000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x6000 0x100>;
+				st,bank-name	= "PIO11";
+			};
+			pio12: gpio@fee07000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x7000 0x100>;
+				st,bank-name	= "PIO12";
+			};
+
+			i2c0 {
+				pinctrl_i2c0_default: i2c0-default {
+					st,pins {
+						sda = <&pio9 3 ALT1 BIDIR>;
+						scl = <&pio9 2 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c1 {
+				pinctrl_i2c1_default: i2c1-default {
+					st,pins {
+						sda = <&pio12 1 ALT1 BIDIR>;
+						scl = <&pio12 0 ALT1 BIDIR>;
+					};
+				};
+			};
+		};
+
+		pin-controller-rear {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih415-rear-pinctrl";
+			st,syscfg	= <&syscfg_rear>;
+			reg 		= <0xfe82f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
+			ranges		= <0 0xfe820000 0x8000>;
+
+			pio13: gpio@fe820000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO13";
+			};
+			pio14: gpio@fe821000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO14";
+			};
+			pio15: gpio@fe822000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO15";
+			};
+			pio16: gpio@fe823000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO16";
+			};
+			pio17: gpio@fe824000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO17";
+			};
+			pio18: gpio@fe825000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x5000 0x100>;
+				st,bank-name	= "PIO18";
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx	= <&pio17 4 ALT2 OUT>;
+						rx	= <&pio17 5 ALT2 IN>;
+					};
+				};
+			};
+
+			gmac0{
+				pinctrl_mii0: mii0 {
+					st,pins {
+					 mdint =	<&pio13 6 ALT2	IN	BYPASS		0>;
+					 txen =		<&pio13 7 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+
+					 txd0 =		<&pio14 0 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+					 txd1 =		<&pio14 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+					 txd2 =		<&pio14 2 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
+					 txd3 =		<&pio14 3 ALT2	OUT	SE_NICLK_IO	0	CLK_B>;
+
+					 txclk =	<&pio15 0 ALT2	IN	NICLK		0	CLK_A>;
+					 txer =		<&pio15 1 ALT2	OUT	SE_NICLK_IO	0	CLK_A>;
+					 crs =		<&pio15 2 ALT2	IN	BYPASS		1000>;
+					 col =		<&pio15 3 ALT2	IN	BYPASS		1000>;
+					 mdio  =        <&pio15 4 ALT2	OUT	BYPASS 	3000>;
+					 mdc   =        <&pio15 5 ALT2	OUT     NICLK  	0    	CLK_B>;
+
+					 rxd0 =		<&pio16 0 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxd1 =		<&pio16 1 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxd2 =		<&pio16 2 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxd3 =		<&pio16 3 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxdv =		<&pio15 6 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rx_er =	<&pio15 7 ALT2	IN	SE_NICLK_IO	0	CLK_A>;
+					 rxclk =	<&pio17 0 ALT2	IN	NICLK		0	CLK_A>;
+					 phyclk =	<&pio13 5 ALT2	OUT	NICLK	1000	CLK_A>;
+
+					};
+				};
+
+			pinctrl_gmii0: gmii0 {
+				st,pins {
+					 mdint =	<&pio13 6	ALT2 IN		BYPASS	0>;
+					 mdio  =        <&pio15 4 	ALT2 OUT	BYPASS 	3000>;
+					 mdc   =        <&pio15 5 	ALT2 OUT    	NICLK  	0    	CLK_B>;
+					 txen =		<&pio13 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
+
+					 txd0 =		<&pio14 0	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
+					 txd1 =		<&pio14 1	ALT2 OUT	SE_NICLK_IO	3000	CLK_A>;
+					 txd2 =		<&pio14 2	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd3 =		<&pio14 3	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd4 =		<&pio14 4	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd5 =		<&pio14 5	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd6 =		<&pio14 6	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+					 txd7 =		<&pio14 7	ALT2 OUT	SE_NICLK_IO	3000	CLK_B>;
+
+					 txclk =	<&pio15 0	ALT2 IN		NICLK	0	CLK_A>;
+					 txer =		<&pio15 1	ALT2 OUT 	SE_NICLK_IO	3000	CLK_A>;
+					 crs =		<&pio15 2	ALT2 IN		BYPASS	1000>;
+					 col =		<&pio15 3	ALT2 IN		BYPASS	1000>;
+					 rxdv =		<&pio15 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rx_er =	<&pio15 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+
+					 rxd0 =		<&pio16 0	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd1 =		<&pio16 1	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd2 =		<&pio16 2	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd3 =		<&pio16 3	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd4 =		<&pio16 4	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd5 =		<&pio16 5	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd6 =		<&pio16 6	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+					 rxd7 =		<&pio16 7	ALT2 IN		SE_NICLK_IO	1500	CLK_A>;
+
+					 rxclk =	<&pio17 0	ALT2 IN	NICLK	0	CLK_A>;
+					 clk125 =	<&pio17 6	ALT1 IN	NICLK	0	CLK_A>;
+                                         phyclk =       <&pio13 5       ALT4 OUT NICLK   0       CLK_B>;
+
+
+					};
+				};
+			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0 {
+					st,pins {
+						mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+						data0  = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
+						data1  = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
+						data2  = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
+						data3  = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
+						cmd    = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
+						wp     = <&pio15 3 ALT4 IN>;
+						data4  = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
+						data5  = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
+						data6  = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
+						data7  = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
+						pwr    = <&pio17 1 ALT4 OUT>;
+						cd     = <&pio17 2 ALT4 IN>;
+						led    = <&pio17 3 ALT4 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-left {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih415-left-pinctrl";
+			st,syscfg	= <&syscfg_left>;
+			reg 		= <0xfd6bf080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
+			ranges		= <0 0xfd6b0000 0x3000>;
+
+			pio100: gpio@fd6b0000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO100";
+			};
+			pio101: gpio@fd6b1000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO101";
+			};
+			pio102: gpio@fd6b2000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO102";
+			};
+		};
+
+		pin-controller-right {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih415-right-pinctrl";
+			st,syscfg	= <&syscfg_right>;
+			reg 		= <0xfd33f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
+			ranges		= <0 0xfd330000 0x5000>;
+
+			pio103: gpio@fd330000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO103";
+			};
+			pio104: gpio@fd331000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO104";
+			};
+			pio105: gpio@fd332000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO105";
+			};
+			pio106: gpio@fd333000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO106";
+			};
+			pio107: gpio@fd334000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO107";
+			};
+		};
+	};
+};
diff --git a/src/arm/stih415.dtsi b/src/arm/stih415.dtsi
new file mode 100644
index 000000000000..19b019b5f30e
--- /dev/null
+++ b/src/arm/stih415.dtsi
@@ -0,0 +1,234 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih41x.dtsi"
+#include "stih415-clock.dtsi"
+#include "stih415-pinctrl.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/stih415-resets.h>
+/ {
+
+	L2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0xfffe2000 0x1000>;
+		arm,data-latency = <3 2 2>;
+		arm,tag-latency = <1 1 1>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible	= "simple-bus";
+
+		powerdown: powerdown-controller {
+			#reset-cells = <1>;
+			compatible = "st,stih415-powerdown";
+		};
+
+		softreset: softreset-controller {
+			#reset-cells = <1>;
+			compatible = "st,stih415-softreset";
+		};
+
+		syscfg_sbc: sbc-syscfg@fe600000{
+			compatible      = "st,stih415-sbc-syscfg", "syscon";
+			reg		= <0xfe600000 0xb4>;
+		};
+
+		syscfg_front: front-syscfg@fee10000{
+			compatible      = "st,stih415-front-syscfg", "syscon";
+			reg		= <0xfee10000 0x194>;
+		};
+
+		syscfg_rear: rear-syscfg@fe830000{
+			compatible      = "st,stih415-rear-syscfg", "syscon";
+			reg		= <0xfe830000 0x190>;
+		};
+
+		/* MPE syscfgs */
+		syscfg_left: left-syscfg@fd690000{
+			compatible      = "st,stih415-left-syscfg", "syscon";
+			reg		= <0xfd690000 0x78>;
+		};
+
+		syscfg_right: right-syscfg@fd320000{
+			compatible      = "st,stih415-right-syscfg", "syscon";
+			reg		= <0xfd320000 0x180>;
+		};
+
+		syscfg_system: system-syscfg@fdde0000  {
+			compatible      = "st,stih415-system-syscfg", "syscon";
+			reg		= <0xfdde0000 0x15c>;
+		};
+
+		syscfg_lpm: lpm-syscfg@fe4b5100{
+			compatible      = "st,stih415-lpm-syscfg", "syscon";
+			reg		= <0xfe4b5100 0x08>;
+		};
+
+		serial2: serial@fed32000 {
+			compatible	= "st,asc";
+			status 		= "disabled";
+			reg		= <0xfed32000 0x2c>;
+			interrupts	= <0 197 0>;
+			pinctrl-names 	= "default";
+			pinctrl-0 	= <&pinctrl_serial2>;
+			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
+		};
+
+		/* SBC comms block ASCs in SASG1 */
+		sbc_serial1: serial@fe531000 {
+			compatible	= "st,asc";
+			status 		= "disabled";
+			reg		= <0xfe531000 0x2c>;
+			interrupts	= <0 210 0>;
+			clocks		= <&clk_sysin>;
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_sbc_serial1>;
+		};
+
+		i2c@fed40000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfed40000 0x110>;
+			interrupts	= <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_i2c0_default>;
+
+			status		= "disabled";
+		};
+
+		i2c@fed41000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfed41000 0x110>;
+			interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_i2c1_default>;
+
+			status		= "disabled";
+		};
+
+		i2c@fe540000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfe540000 0x110>;
+			interrupts	= <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			clocks		= <&clk_sysin>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_sbc_i2c0_default>;
+
+			status		= "disabled";
+		};
+
+		i2c@fe541000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfe541000 0x110>;
+			interrupts	= <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks		= <&clk_sysin>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_sbc_i2c1_default>;
+
+			status		= "disabled";
+		};
+
+		ethernet0: dwmac@fe810000 {
+			device_type 	= "network";
+			compatible	= "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
+			status 		= "disabled";
+
+			reg		= <0xfe810000 0x8000>;
+			reg-names	= "stmmaceth";
+
+			interrupts 	= <0 147 0>, <0 148 0>, <0 149 0>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			resets			= <&softreset STIH415_ETH0_SOFTRESET>;
+			reset-names		= "stmmaceth";
+
+			snps,pbl 	= <32>;
+			snps,mixed-burst;
+			snps,force_sf_dma_mode;
+
+			st,syscon	= <&syscfg_rear 0x148>;
+
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_mii0>;
+			clock-names	= "stmmaceth", "sti-ethclk";
+			clocks		= <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
+		};
+
+		ethernet1: dwmac@fef08000 {
+			device_type = "network";
+			compatible	= "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
+			status 		= "disabled";
+			reg		= <0xfef08000 0x8000>;
+			reg-names	= "stmmaceth";
+			interrupts 	= <0 150 0>, <0 151 0>, <0 152 0>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+			snps,pbl	= <32>;
+			snps,mixed-burst;
+			snps,force_sf_dma_mode;
+
+			st,syscon		= <&syscfg_sbc 0x74>;
+
+			resets			= <&softreset STIH415_ETH1_SOFTRESET>;
+			reset-names		= "stmmaceth";
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_mii1>;
+			clock-names	= "stmmaceth", "sti-ethclk";
+			clocks		= <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
+		};
+
+		rc: rc@fe518000 {
+			compatible	= "st,comms-irb";
+			reg		= <0xfe518000 0x234>;
+			interrupts	=  <0 203 0>;
+			clocks		= <&clk_sysin>;
+			rx-mode		= "infrared";
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_ir>;
+			resets		= <&softreset STIH415_IRB_SOFTRESET>;
+		};
+
+		keyscan: keyscan@fe4b0000 {
+			compatible = "st,sti-keyscan";
+			status = "disabled";
+			reg = <0xfe4b0000 0x2000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+			clocks = <&clk_sysin>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_keyscan>;
+			resets	= <&powerdown STIH415_KEYSCAN_POWERDOWN>,
+				  <&softreset STIH415_KEYSCAN_SOFTRESET>;
+		};
+
+		mmc0: sdhci@fe81e000 {
+			compatible      = "st,sdhci";
+			status          = "disabled";
+			reg             = <0xfe81e000 0x1000>;
+			interrupts      = <GIC_SPI 145 IRQ_TYPE_NONE>;
+			interrupt-names = "mmcirq";
+			pinctrl-names   = "default";
+			pinctrl-0       = <&pinctrl_mmc0>;
+			clock-names     = "mmc";
+			clocks          = <&clk_s_a1_ls 1>;
+		};
+	};
+};
diff --git a/src/arm/stih416-b2000.dts b/src/arm/stih416-b2000.dts
new file mode 100644
index 000000000000..488e80a5d69d
--- /dev/null
+++ b/src/arm/stih416-b2000.dts
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih416.dtsi"
+#include "stih41x-b2000.dtsi"
+/ {
+	model = "STiH416 B2000";
+	compatible = "st,stih416-b2000", "st,stih416";
+};
diff --git a/src/arm/stih416-b2020.dts b/src/arm/stih416-b2020.dts
new file mode 100644
index 000000000000..200a81844765
--- /dev/null
+++ b/src/arm/stih416-b2020.dts
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih416.dtsi"
+#include "stih41x-b2020.dtsi"
+/ {
+	model = "STiH416 B2020";
+	compatible = "st,stih416-b2020", "st,stih416";
+
+	soc {
+		mmc1: sdhci@fe81f000 {
+			status       = "okay";
+			bus-width    = <8>;
+			non-removable;
+		};
+
+		miphy365x_phy: phy@fe382000 {
+			phy_port0: port@fe382000 {
+				st,sata-gen = <3>;
+			};
+
+			phy_port1: port@fe38a000 {
+				st,pcie-tx-pol-inv;
+			};
+		};
+
+		sata0: sata@fe380000{
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/stih416-b2020e.dts b/src/arm/stih416-b2020e.dts
new file mode 100644
index 000000000000..961799e1dc51
--- /dev/null
+++ b/src/arm/stih416-b2020e.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih416.dtsi"
+#include "stih41x-b2020.dtsi"
+/ {
+	model = "STiH416 B2020 REV-E";
+	compatible = "st,stih416-b2020", "st,stih416";
+
+	soc {
+		leds {
+			compatible = "gpio-leds";
+			red {
+				#gpio-cells		= <1>;
+				label			= "Front Panel LED";
+				gpios			= <&pio4 1>;
+				linux,default-trigger	= "heartbeat";
+			};
+			green {
+				gpios			= <&pio1 3>;
+				default-state 		= "off";
+			};
+		};
+
+		ethernet1: dwmac@fef08000 {
+			snps,reset-gpio = <&pio0 7>;
+		};
+
+		mmc1: sdhci@fe81f000 {
+			status       = "okay";
+			bus-width    = <8>;
+			non-removable;
+		};
+
+		miphy365x_phy: phy@fe382000 {
+			phy_port0: port@fe382000 {
+				st,sata-gen = <3>;
+			};
+
+			phy_port1: port@fe38a000 {
+				st,pcie-tx-pol-inv;
+			};
+		};
+
+		sata0: sata@fe380000{
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/stih416-clock.dtsi b/src/arm/stih416-clock.dtsi
new file mode 100644
index 000000000000..5b4fb838cddb
--- /dev/null
+++ b/src/arm/stih416-clock.dtsi
@@ -0,0 +1,756 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics R&D Limited
+ * <stlinux-devel@stlinux.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/stih416-clks.h>
+
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed 30MHz oscillator inputs to SoC
+		 */
+		clk_sysin: clk-sysin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+		};
+
+		/*
+		 * ClockGenAs on SASG2
+		 */
+		clockgen-a@fee62000 {
+			reg = <0xfee62000 0xb48>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-plls-c65";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll0-hs",
+						     "clk-s-a0-pll0-ls",
+						     "clk-s-a0-pll1";
+			};
+
+			clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c65",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-osc-prediv";
+			};
+
+			clk_s_a0_hs: clk-s-a0-hs {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-hs",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a0_osc_prediv>,
+					 <&clk_s_a0_pll 0>, /* PLL0 HS */
+					 <&clk_s_a0_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-fdma-0",
+						     "clk-s-fdma-1",
+						     ""; /* clk-s-jit-sense */
+						     /* Fourth output unused */
+			};
+
+			clk_s_a0_ls: clk-s-a0-ls {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-ls",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a0_osc_prediv>,
+					 <&clk_s_a0_pll 1>, /* PLL0 LS */
+					 <&clk_s_a0_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-icn-reg-0",
+						     "clk-s-icn-if-0",
+						     "clk-s-icn-reg-lp-0",
+						     "clk-s-emiss",
+						     "clk-s-eth1-phy",
+						     "clk-s-mii-ref-out";
+						     /* Remaining outputs unused */
+			};
+		};
+
+		clockgen-a@fee81000 {
+			reg = <0xfee81000 0xb48>;
+
+			clk_s_a1_pll: clk-s-a1-pll {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-plls-c65";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a1-pll0-hs",
+						     "clk-s-a1-pll0-ls",
+						     "clk-s-a1-pll1";
+			};
+
+			clk_s_a1_osc_prediv: clk-s-a1-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c65",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a1-osc-prediv";
+			};
+
+			clk_s_a1_hs: clk-s-a1-hs {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-hs",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a1_osc_prediv>,
+					 <&clk_s_a1_pll 0>, /* PLL0 HS */
+					 <&clk_s_a1_pll 2>; /* PLL1 */
+
+				clock-output-names = "", /* Reserved */
+						     "", /* Reserved */
+						     "clk-s-stac-phy",
+						     "clk-s-vtac-tx-phy";
+			};
+
+			clk_s_a1_ls: clk-s-a1-ls {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c65-ls",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_s_a1_osc_prediv>,
+					 <&clk_s_a1_pll 1>, /* PLL0 LS */
+					 <&clk_s_a1_pll 2>; /* PLL1 */
+
+				clock-output-names = "clk-s-icn-if-2",
+						     "clk-s-card-mmc-0",
+						     "clk-s-icn-if-1",
+						     "clk-s-gmac0-phy",
+						     "clk-s-nand-ctrl",
+						     "", /* Reserved */
+						     "clk-s-mii0-ref-out",
+						     "clk-s-stac-sys",
+						     "clk-s-card-mmc-1";
+						     /* Remaining outputs unused */
+			};
+		};
+
+		/*
+		 * ClockGenAs on MPE42
+		 */
+		clockgen-a@fde12000 {
+			reg = <0xfde12000 0xb50>;
+
+			clk_m_a0_pll0: clk-m-a0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-pll0-phi0",
+						     "clk-m-a0-pll0-phi1",
+						     "clk-m-a0-pll0-phi2",
+						     "clk-m-a0-pll0-phi3";
+			};
+
+			clk_m_a0_pll1: clk-m-a0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-pll1-phi0",
+						     "clk-m-a0-pll1-phi1",
+						     "clk-m-a0-pll1-phi2",
+						     "clk-m-a0-pll1-phi3";
+			};
+
+			clk_m_a0_osc_prediv: clk-m-a0-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a0-osc-prediv";
+			};
+
+			clk_m_a0_div0: clk-m-a0-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "clk-m-fdma-12",
+						     "", /* Unused */
+						     "clk-m-pp-dmu-0",
+						     "clk-m-pp-dmu-1",
+						     "clk-m-icm-lmi",
+						     "clk-m-vid-dmu-0";
+			};
+
+			clk_m_a0_div1: clk-m-a0-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "clk-m-vid-dmu-1",
+						     "", /* Unused */
+						     "clk-m-a9-ext2f",
+						     "clk-m-st40rt",
+						     "clk-m-st231-dmu-0",
+						     "clk-m-st231-dmu-1",
+						     "clk-m-st231-aud",
+						     "clk-m-st231-gp-0";
+			};
+
+			clk_m_a0_div2: clk-m-a0-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "clk-m-st231-gp-1",
+						     "clk-m-icn-cpu",
+						     "clk-m-icn-stac",
+						     "clk-m-tx-icn-dmu-0",
+						     "clk-m-tx-icn-dmu-1",
+						     "clk-m-tx-icn-ts",
+						     "clk-m-icn-vdp-0",
+						     "clk-m-icn-vdp-1";
+			};
+
+			clk_m_a0_div3: clk-m-a0-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a0_osc_prediv>,
+					 <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "clk-m-icn-vp8",
+						     "", /* Unused */
+						     "clk-m-icn-reg-11",
+						     "clk-m-a9-trace";
+			};
+		};
+
+		clockgen-a@fd6db000 {
+			reg = <0xfd6db000 0xb50>;
+
+			clk_m_a1_pll0: clk-m-a1-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-pll0-phi0",
+						     "clk-m-a1-pll0-phi1",
+						     "clk-m-a1-pll0-phi2",
+						     "clk-m-a1-pll0-phi3";
+			};
+
+			clk_m_a1_pll1: clk-m-a1-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-pll1-phi0",
+						     "clk-m-a1-pll1-phi1",
+						     "clk-m-a1-pll1-phi2",
+						     "clk-m-a1-pll1-phi3";
+			};
+
+			clk_m_a1_osc_prediv: clk-m-a1-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a1-osc-prediv";
+			};
+
+			clk_m_a1_div0: clk-m-a1-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "", /* Unused */
+						     "clk-m-fdma-10",
+						     "clk-m-fdma-11",
+						     "clk-m-hva-alt",
+						     "clk-m-proc-sc",
+						     "clk-m-tp",
+						     "clk-m-rx-icn-dmu-0",
+						     "clk-m-rx-icn-dmu-1";
+			};
+
+			clk_m_a1_div1: clk-m-a1-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "clk-m-rx-icn-ts",
+						     "clk-m-rx-icn-vdp-0",
+						     "", /* Unused */
+						     "clk-m-prv-t1-bus",
+						     "clk-m-icn-reg-12",
+						     "clk-m-icn-reg-10",
+						     "", /* Unused */
+						     "clk-m-icn-st231";
+			};
+
+			clk_m_a1_div2: clk-m-a1-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "clk-m-fvdp-proc-alt",
+						     "clk-m-icn-reg-13",
+						     "clk-m-tx-icn-gpu",
+						     "clk-m-rx-icn-gpu",
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* clk-m-apb-pm-12 */
+						     ""; /* Unused */
+			};
+
+			clk_m_a1_div3: clk-m-a1-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a1_osc_prediv>,
+					 <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     "", /* Unused */
+						     ""; /* clk-m-gpu-alt */
+			};
+		};
+
+		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a0_div1 2>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		clockgen-a@fd345000 {
+			reg = <0xfd345000 0xb50>;
+
+			clk_m_a2_pll0: clk-m-a2-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-pll0-phi0",
+						     "clk-m-a2-pll0-phi1",
+						     "clk-m-a2-pll0-phi2",
+						     "clk-m-a2-pll0-phi3";
+			};
+
+			clk_m_a2_pll1: clk-m-a2-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-pll1-phi0",
+						     "clk-m-a2-pll1-phi1",
+						     "clk-m-a2-pll1-phi2",
+						     "clk-m-a2-pll1-phi3";
+			};
+
+			clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
+				#clock-cells = <0>;
+				compatible = "st,clkgena-prediv-c32",
+					     "st,clkgena-prediv";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-m-a2-osc-prediv";
+			};
+
+			clk_m_a2_div0: clk-m-a2-div0 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf0",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */
+					 <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */
+
+				clock-output-names = "clk-m-vtac-main-phy",
+						     "clk-m-vtac-aux-phy",
+						     "clk-m-stac-phy",
+						     "clk-m-stac-sys",
+						     "", /* clk-m-mpestac-pg */
+						     "", /* clk-m-mpestac-wc */
+						     "", /* clk-m-mpevtacaux-pg*/
+						     ""; /* clk-m-mpevtacmain-pg*/
+			};
+
+			clk_m_a2_div1: clk-m-a2-div1 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf1",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */
+					 <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */
+
+				clock-output-names = "", /* clk-m-mpevtacrx0-wc */
+						     "", /* clk-m-mpevtacrx1-wc */
+						     "clk-m-compo-main",
+						     "clk-m-compo-aux",
+						     "clk-m-bdisp-0",
+						     "clk-m-bdisp-1",
+						     "clk-m-icn-bdisp",
+						     "clk-m-icn-compo";
+			};
+
+			clk_m_a2_div2: clk-m-a2-div2 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf2",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */
+					 <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */
+
+				clock-output-names = "clk-m-icn-vdp-2",
+						     "", /* Unused */
+						     "clk-m-icn-reg-14",
+						     "clk-m-mdtp",
+						     "clk-m-jpegdec",
+						     "", /* Unused */
+						     "clk-m-dcephy-impctrl",
+						     ""; /* Unused */
+			};
+
+			clk_m_a2_div3: clk-m-a2-div3 {
+				#clock-cells = <1>;
+				compatible = "st,clkgena-divmux-c32-odf3",
+					     "st,clkgena-divmux";
+
+				clocks = <&clk_m_a2_osc_prediv>,
+					 <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */
+					 <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */
+
+				clock-output-names = "", /* Unused */
+						     ""; /* clk-m-apb-pm-11 */
+						     /* Remaining outputs unused */
+			};
+		};
+
+		/*
+		 * A9 PLL
+		 */
+		clockgen-a9@fdde08b0 {
+			reg = <0xfdde08b0 0x70>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks
+		 */
+		clk_m_a9: clk-m-a9@fdde08ac {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0xfdde08ac 0x4>;
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_m_a0_div1 2>,
+				 <&clk_m_a9_ext2f_div2>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: clk-m-a9-periphs {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a9>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * Frequency synthesizers on the SASG2
+		 */
+		clockgen_b0: clockgen-b0@fee108b4 {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs216", "st,quadfs";
+			reg = <0xfee108b4 0x44>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-s-usb48",
+					     "clk-s-dss",
+					     "clk-s-stfe-frc-2",
+					     "clk-s-thsens-scard";
+		};
+
+		clockgen_b1: clockgen-b1@fe8308c4 {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs216", "st,quadfs";
+			reg = <0xfe8308c4 0x44>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-s-pcm-0",
+					     "clk-s-pcm-1",
+					     "clk-s-pcm-2",
+					     "clk-s-pcm-3";
+		};
+
+		clockgen_c: clockgen-c@fe8307d0 {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs432", "st,quadfs";
+			reg = <0xfe8307d0 0x44>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-s-c-fs0-ch0",
+					     "clk-s-c-vcc-sd",
+					     "clk-s-c-fs0-ch2";
+		};
+
+		clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux";
+			reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */
+
+			clocks = <&clk_sysin>,
+				 <&clockgen_c 0>;
+		};
+
+		/*
+		 * Add a dummy clock for the HDMI PHY for the VCC input mux
+		 */
+		clk_s_tmds_fromphy: clk-s-tmds-fromphy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clockgen_c_vcc: clockgen-c-vcc@fe8308ac {
+			#clock-cells = <1>;
+			compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
+			reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */
+
+			clocks = <&clk_s_vcc_hd>,
+				 <&clockgen_c 1>,
+				 <&clk_s_tmds_fromphy>,
+				 <&clockgen_c 2>;
+
+			clock-output-names  = "clk-s-pix-hdmi",
+					      "clk-s-pix-dvo",
+					      "clk-s-out-dvo",
+					      "clk-s-pix-hd",
+					      "clk-s-hddac",
+					      "clk-s-denc",
+					      "clk-s-sddac",
+					      "clk-s-pix-main",
+					      "clk-s-pix-aux",
+					      "clk-s-stfe-frc-0",
+					      "clk-s-ref-mcru",
+					      "clk-s-slave-mcru",
+					      "clk-s-tmds-hdmi",
+					      "clk-s-hdmi-reject-pll",
+					      "clk-s-thsens";
+		};
+
+		clockgen_d: clockgen-d@fee107e0 {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs216", "st,quadfs";
+			reg = <0xfee107e0 0x44>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-s-ccsc",
+					     "clk-s-stfe-frc-1",
+					     "clk-s-tsout-1",
+					     "clk-s-mchi";
+		};
+
+		/*
+		 * Frequency synthesizers on the MPE42
+		 */
+		clockgen_e: clockgen-e@fd3208bc {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs660-E", "st,quadfs";
+			reg = <0xfd3208bc 0xb0>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-m-pix-mdtp-0",
+					     "clk-m-pix-mdtp-1",
+					     "clk-m-pix-mdtp-2",
+					     "clk-m-mpelpc";
+		};
+
+		clockgen_f: clockgen-f@fd320878 {
+			#clock-cells = <1>;
+			compatible = "st,stih416-quadfs660-F", "st,quadfs";
+			reg = <0xfd320878 0xf0>;
+
+			clocks = <&clk_sysin>;
+			clock-output-names = "clk-m-main-vidfs",
+					     "clk-m-hva-fs",
+					     "clk-m-fvdp-vcpu",
+					     "clk-m-fvdp-proc-fs";
+		};
+
+		clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux";
+			reg = <0xfd320910 0x4>; /* SYSCFG8580 */
+
+			clocks = <&clk_m_a1_div2 0>,
+				 <&clockgen_f 3>;
+		};
+
+		clk_m_hva: clk-m-hva@fd690868 {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
+			reg = <0xfd690868 0x4>; /* SYSCFG9538 */
+
+			clocks = <&clockgen_f 1>,
+				 <&clk_m_a1_div0 3>;
+		};
+
+		clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux";
+			reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
+
+			clocks = <&clockgen_c_vcc 7>,
+				 <&clockgen_f 0>;
+		};
+
+		clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c {
+			#clock-cells = <0>;
+			compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux";
+			reg = <0xfd32086c 0x4>; /* SYSCFG8539 */
+
+			clocks = <&clockgen_c_vcc 8>,
+				 <&clockgen_f 1>;
+		};
+
+		/*
+		 * Add a dummy clock for the HDMIRx external signal clock
+		 */
+		clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clockgen_f_vcc: clockgen-f-vcc@fd32086c {
+			#clock-cells = <1>;
+			compatible = "st,stih416-clkgenf", "st,clkgen-vcc";
+			reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */
+
+			clocks = <&clk_m_f_vcc_hd>,
+				 <&clk_m_f_vcc_sd>,
+				 <&clockgen_f 0>,
+				 <&clk_m_pix_hdmirx_sas>;
+
+			clock-output-names  = "clk-m-pix-main-pipe",
+					      "clk-m-pix-aux-pipe",
+					      "clk-m-pix-main-cru",
+					      "clk-m-pix-aux-cru",
+					      "clk-m-xfer-be-compo",
+					      "clk-m-xfer-pip-compo",
+					      "clk-m-xfer-aux-compo",
+					      "clk-m-vsens",
+					      "clk-m-pix-hdmirx-0",
+					      "clk-m-pix-hdmirx-1";
+		};
+
+		/*
+		 * DDR PLL
+		 */
+		clockgen-ddr@0xfdde07d8 {
+			reg = <0xfdde07d8 0x110>;
+
+			clockgen_ddr_pll: clockgen-ddr-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+				clock-output-names = "clockgen-ddr0",
+						     "clockgen-ddr1";
+			};
+		};
+
+		/*
+		 * GPU PLL
+		 */
+		clockgen-gpu@fd68ff00 {
+			reg = <0xfd68ff00 0x910>;
+
+			clockgen_gpu_pll: clockgen-gpu-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32";
+
+				clocks = <&clk_sysin>;
+				clock-output-names = "clockgen-gpu-pll";
+			};
+		};
+	};
+};
diff --git a/src/arm/stih416-pinctrl.dtsi b/src/arm/stih416-pinctrl.dtsi
new file mode 100644
index 000000000000..9cccf2d6aa26
--- /dev/null
+++ b/src/arm/stih416-pinctrl.dtsi
@@ -0,0 +1,637 @@
+
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+
+	aliases {
+		gpio0	= &pio0;
+		gpio1	= &pio1;
+		gpio2	= &pio2;
+		gpio3	= &pio3;
+		gpio4	= &pio4;
+		gpio5	= &pio40;
+		gpio6	= &pio5;
+		gpio7	= &pio6;
+		gpio8	= &pio7;
+		gpio9	= &pio8;
+		gpio10	= &pio9;
+		gpio11	= &pio10;
+		gpio12	= &pio11;
+		gpio13	= &pio12;
+		gpio14	= &pio30;
+		gpio15	= &pio31;
+		gpio16	= &pio13;
+		gpio17	= &pio14;
+		gpio18	= &pio15;
+		gpio19	= &pio16;
+		gpio20	= &pio17;
+		gpio21	= &pio18;
+		gpio22	= &pio100;
+		gpio23	= &pio101;
+		gpio24	= &pio102;
+		gpio25	= &pio103;
+		gpio26	= &pio104;
+		gpio27	= &pio105;
+		gpio28	= &pio106;
+		gpio29	= &pio107;
+	};
+
+	soc {
+		pin-controller-sbc {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih416-sbc-pinctrl";
+			st,syscfg	= <&syscfg_sbc>;
+			reg 		= <0xfe61f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
+			ranges		= <0 0xfe610000 0x6000>;
+
+			pio0: gpio@fe610000 {
+				gpio-controller;
+				#gpio-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO0";
+			};
+			pio1: gpio@fe611000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO1";
+			};
+			pio2: gpio@fe612000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO2";
+			};
+			pio3: gpio@fe613000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO3";
+			};
+			pio4: gpio@fe614000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO4";
+			};
+			pio40: gpio@fe615000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x5000 0x100>;
+				st,bank-name	= "PIO40";
+				st,retime-pin-mask = <0x7f>;
+			};
+
+			rc{
+				pinctrl_ir: ir0 {
+					st,pins {
+						ir = <&pio4 0 ALT2 IN>;
+					};
+				};
+			};
+			sbc_serial1 {
+				pinctrl_sbc_serial1: sbc_serial1 {
+					st,pins {
+						tx	= <&pio2 6 ALT3 OUT>;
+						rx	= <&pio2 7 ALT3 IN>;
+					};
+				};
+			};
+
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&pio0 2 ALT2 IN>;
+						keyin1 = <&pio0 3 ALT2 IN>;
+						keyin2 = <&pio0 4 ALT2 IN>;
+						keyin3 = <&pio2 6 ALT2 IN>;
+
+						keyout0 = <&pio1 6 ALT2 OUT>;
+						keyout1 = <&pio1 7 ALT2 OUT>;
+						keyout2 = <&pio0 6 ALT2 OUT>;
+						keyout3 = <&pio2 7 ALT2 OUT>;
+					};
+				};
+			};
+
+			sbc_i2c0 {
+				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
+					st,pins {
+						sda = <&pio4 6 ALT1 BIDIR>;
+						scl = <&pio4 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			usb {
+				pinctrl_usb3: usb3 {
+					st,pins {
+						oc-detect = <&pio40 0 ALT1 IN>;
+						pwr-enable = <&pio40 1 ALT1 OUT>;
+					};
+				};
+			};
+
+			sbc_i2c1 {
+				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
+					st,pins {
+						sda = <&pio3 2 ALT2 BIDIR>;
+						scl = <&pio3 1 ALT2 BIDIR>;
+					};
+				};
+			};
+
+			gmac1 {
+				pinctrl_mii1: mii1 {
+					st,pins {
+						txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+						txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+						col =   <&pio0 7 ALT1 IN BYPASS 1000>;
+
+						mdio =  <&pio1 0 ALT1 OUT BYPASS 1500>;
+						mdc =   <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+						crs =   <&pio1 2 ALT1 IN BYPASS 1000>;
+						mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+						rxd0 =  <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 =  <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 =  <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 =  <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+						rxdv =  <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+						phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
+					};
+				};
+				pinctrl_rgmii1: rgmii1-0 {
+					st,pins {
+						txd0 =  <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
+						txd1 =  <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
+						txd2 =  <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
+						txd3 =  <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
+						txen =  <&pio0 5 ALT1 OUT DE_IO 0   CLK_A>;
+						txclk = <&pio0 6 ALT1 IN  NICLK 0   CLK_A>;
+
+						mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+						mdc  = <&pio1 1 ALT1 OUT NICLK  0 CLK_A>;
+						rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
+						rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
+						rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
+						rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
+
+						rxdv   = <&pio2 0 ALT1 IN  DE_IO 500 CLK_A>;
+						rxclk  = <&pio2 2 ALT1 IN  NICLK 0   CLK_A>;
+						phyclk = <&pio2 3 ALT4 OUT NICLK 0   CLK_B>;
+
+						clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
+					};
+				};
+			};
+		};
+
+		pin-controller-front {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih416-front-pinctrl";
+			st,syscfg	= <&syscfg_front>;
+			reg 		= <0xfee0f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
+			ranges		= <0 0xfee00000 0x10000>;
+
+			pio5: gpio@fee00000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO5";
+			};
+			pio6: gpio@fee01000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO6";
+			};
+			pio7: gpio@fee02000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO7";
+			};
+			pio8: gpio@fee03000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO8";
+			};
+			pio9: gpio@fee04000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO9";
+			};
+			pio10: gpio@fee05000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x5000 0x100>;
+				st,bank-name	= "PIO10";
+			};
+			pio11: gpio@fee06000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x6000 0x100>;
+				st,bank-name	= "PIO11";
+			};
+			pio12: gpio@fee07000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x7000 0x100>;
+				st,bank-name	= "PIO12";
+			};
+			pio30: gpio@fee08000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x8000 0x100>;
+				st,bank-name	= "PIO30";
+			};
+			pio31: gpio@fee09000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x9000 0x100>;
+				st,bank-name	= "PIO31";
+			};
+
+			serial2-oe {
+				pinctrl_serial2_oe: serial2-1 {
+					st,pins {
+						output-enable	= <&pio11 3 ALT2 OUT>;
+					};
+				};
+			};
+
+			i2c0 {
+				pinctrl_i2c0_default: i2c0-default {
+					st,pins {
+						sda = <&pio9 3 ALT1 BIDIR>;
+						scl = <&pio9 2 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			usb {
+				pinctrl_usb0: usb0 {
+					st,pins {
+						oc-detect = <&pio9 4 ALT1 IN>;
+						pwr-enable = <&pio9 5 ALT1 OUT>;
+					};
+				};
+			};
+
+
+			i2c1 {
+				pinctrl_i2c1_default: i2c1-default {
+					st,pins {
+						sda = <&pio12 1 ALT1 BIDIR>;
+						scl = <&pio12 0 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			fsm {
+				pinctrl_fsm: fsm {
+					st,pins {
+						spi-fsm-clk  = <&pio12 2 ALT1 OUT>;
+						spi-fsm-cs   = <&pio12 3 ALT1 OUT>;
+						spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
+						spi-fsm-miso = <&pio12 5 ALT1 IN>;
+						spi-fsm-hol  = <&pio12 6 ALT1 OUT>;
+						spi-fsm-wp   = <&pio12 7 ALT1 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-rear {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih416-rear-pinctrl";
+			st,syscfg	= <&syscfg_rear>;
+			reg 		= <0xfe82f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
+			ranges 		= <0 0xfe820000 0x6000>;
+
+			pio13: gpio@fe820000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO13";
+			};
+			pio14: gpio@fe821000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO14";
+			};
+			pio15: gpio@fe822000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO15";
+			};
+			pio16: gpio@fe823000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO16";
+			};
+			pio17: gpio@fe824000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO17";
+			};
+			pio18: gpio@fe825000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x5000 0x100>;
+				st,bank-name	= "PIO18";
+				st,retime-pin-mask = <0xf>;
+			};
+
+			serial2 {
+				pinctrl_serial2: serial2-0 {
+					st,pins {
+						tx	= <&pio17 4 ALT2 OUT>;
+						rx	= <&pio17 5 ALT2 IN>;
+					};
+				};
+			};
+
+			gmac0 {
+				pinctrl_mii0: mii0 {
+					st,pins {
+						mdint = <&pio13 6 ALT2 IN  BYPASS      0>;
+						txen =  <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						txd0 =  <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						txd1 =  <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						txd2 =  <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+						txd3 =  <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+
+						txclk = <&pio15 0 ALT2 IN  NICLK       0 CLK_A>;
+						txer =  <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+						crs = <&pio15 2 ALT2 IN  BYPASS 1000>;
+						col = <&pio15 3 ALT2 IN  BYPASS 1000>;
+						mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
+						mdc = <&pio15 5 ALT2 OUT NICLK  0    CLK_B>;
+
+						rxd0 =  <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxd1 =  <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxd2 =  <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxd3 =  <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxdv =  <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+						rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+						phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
+					};
+				};
+
+				pinctrl_gmii0: gmii0 {
+					st,pins {
+						};
+				};
+				pinctrl_rgmii0: rgmii0 {
+					st,pins {
+						 phyclk = <&pio13  5 ALT4 OUT NICLK 0 CLK_B>;
+						 txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
+						 txd0  = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
+						 txd1  = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
+						 txd2  = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
+						 txd3  = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
+						 txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+
+						 mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
+						 mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+						 rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
+						 rxd0 =<&pio16 0 ALT2 IN DE_IO	500 CLK_A>;
+						 rxd1 =<&pio16 1 ALT2 IN DE_IO	500 CLK_A>;
+						 rxd2 =<&pio16 2 ALT2 IN DE_IO	500 CLK_A>;
+						 rxd3  =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
+						 rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+
+						 clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
+					};
+				};
+			};
+
+			mmc0 {
+				pinctrl_mmc0: mmc0 {
+					st,pins {
+						mmcclk  = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+						data0   = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
+						data1   = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
+						data2   = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
+						data3   = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
+						cmd     = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
+						wp      = <&pio15 3 ALT4 IN>;
+						data4   = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
+						data5   = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
+						data6   = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
+						data7   = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
+						pwr     = <&pio17 1 ALT4 OUT>;
+						cd      = <&pio17 2 ALT4 IN>;
+						led     = <&pio17 3 ALT4 OUT>;
+					};
+				};
+			};
+			mmc1 {
+				pinctrl_mmc1: mmc1 {
+					st,pins {
+						mmcclk  = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>;
+						data0   = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>;
+						data1   = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>;
+						data2   = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>;
+						data3   = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>;
+						cmd     = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>;
+						data4   = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>;
+						data5   = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>;
+						data6   = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>;
+						data7   = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>;
+						pwr     = <&pio16 2 ALT3 OUT>;
+						nreset  = <&pio13 6 ALT3 OUT>;
+					};
+				};
+			};
+
+			usb {
+				pinctrl_usb1: usb1 {
+					st,pins {
+						oc-detect = <&pio18 0 ALT1 IN>;
+						pwr-enable = <&pio18 1 ALT1 OUT>;
+					};
+				};
+				pinctrl_usb2: usb2 {
+					st,pins {
+						oc-detect = <&pio18 2 ALT1 IN>;
+						pwr-enable = <&pio18 3 ALT1 OUT>;
+					};
+				};
+			};
+		};
+
+		pin-controller-fvdp-fe {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih416-fvdp-fe-pinctrl";
+			st,syscfg	= <&syscfg_fvdp_fe>;
+			reg 		= <0xfd6bf080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
+			ranges		= <0 0xfd6b0000 0x3000>;
+
+			pio100: gpio@fd6b0000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO100";
+			};
+			pio101: gpio@fd6b1000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO101";
+			};
+			pio102: gpio@fd6b2000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO102";
+			};
+		};
+
+		pin-controller-fvdp-lite {
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			compatible	= "st,stih416-fvdp-lite-pinctrl";
+			st,syscfg		= <&syscfg_fvdp_lite>;
+			reg 		= <0xfd33f080 0x4>;
+			reg-names	= "irqmux";
+			interrupts 	= <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names	= "irqmux";
+			ranges			= <0 0xfd330000 0x5000>;
+
+			pio103: gpio@fd330000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0 0x100>;
+				st,bank-name	= "PIO103";
+			};
+			pio104: gpio@fd331000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x1000 0x100>;
+				st,bank-name	= "PIO104";
+			};
+			pio105: gpio@fd332000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x2000 0x100>;
+				st,bank-name	= "PIO105";
+			};
+			pio106: gpio@fd333000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x3000 0x100>;
+				st,bank-name	= "PIO106";
+			};
+
+			pio107: gpio@fd334000 {
+				gpio-controller;
+				#gpio-cells	= <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg		= <0x4000 0x100>;
+				st,bank-name	= "PIO107";
+				st,retime-pin-mask = <0xf>;
+			};
+		};
+	};
+};
diff --git a/src/arm/stih416.dtsi b/src/arm/stih416.dtsi
new file mode 100644
index 000000000000..ea28ebadab1a
--- /dev/null
+++ b/src/arm/stih416.dtsi
@@ -0,0 +1,449 @@
+/*
+ * Copyright (C) 2012 STMicroelectronics Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih41x.dtsi"
+#include "stih416-clock.dtsi"
+#include "stih416-pinctrl.dtsi"
+
+#include <dt-bindings/phy/phy-miphy365x.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/stih416-resets.h>
+/ {
+	L2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0xfffe2000 0x1000>;
+		arm,data-latency = <3 3 3>;
+		arm,tag-latency = <2 2 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible	= "simple-bus";
+
+		powerdown: powerdown-controller {
+			#reset-cells = <1>;
+			compatible = "st,stih416-powerdown";
+		};
+
+		softreset: softreset-controller {
+			#reset-cells = <1>;
+			compatible = "st,stih416-softreset";
+		};
+
+		syscfg_sbc:sbc-syscfg@fe600000{
+			compatible	= "st,stih416-sbc-syscfg", "syscon";
+			reg		= <0xfe600000 0x1000>;
+		};
+
+		syscfg_front:front-syscfg@fee10000{
+			compatible	= "st,stih416-front-syscfg", "syscon";
+			reg		= <0xfee10000 0x1000>;
+		};
+
+		syscfg_rear:rear-syscfg@fe830000{
+			compatible	= "st,stih416-rear-syscfg", "syscon";
+			reg		= <0xfe830000 0x1000>;
+		};
+
+		/* MPE */
+		syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{
+			compatible	= "st,stih416-fvdp-fe-syscfg", "syscon";
+			reg		= <0xfddf0000 0x1000>;
+		};
+
+		syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{
+			compatible	= "st,stih416-fvdp-lite-syscfg", "syscon";
+			reg		= <0xfd6a0000 0x1000>;
+		};
+
+		syscfg_cpu:cpu-syscfg@fdde0000{
+			compatible	= "st,stih416-cpu-syscfg", "syscon";
+			reg		= <0xfdde0000 0x1000>;
+		};
+
+		syscfg_compo:compo-syscfg@fd320000{
+			compatible	= "st,stih416-compo-syscfg", "syscon";
+			reg		= <0xfd320000 0x1000>;
+		};
+
+		syscfg_transport:transport-syscfg@fd690000{
+			compatible	= "st,stih416-transport-syscfg", "syscon";
+			reg		= <0xfd690000 0x1000>;
+		};
+
+		syscfg_lpm:lpm-syscfg@fe4b5100{
+			compatible	= "st,stih416-lpm-syscfg", "syscon";
+			reg		= <0xfe4b5100 0x8>;
+		};
+
+		serial2: serial@fed32000{
+			compatible	= "st,asc";
+			status 		= "disabled";
+			reg		= <0xfed32000 0x2c>;
+			interrupts	= <0 197 0>;
+			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
+			pinctrl-names 	= "default";
+			pinctrl-0 	= <&pinctrl_serial2 &pinctrl_serial2_oe>;
+		};
+
+		/* SBC_UART1 */
+		sbc_serial1: serial@fe531000 {
+			compatible	= "st,asc";
+			status 		= "disabled";
+			reg		= <0xfe531000 0x2c>;
+			interrupts	= <0 210 0>;
+			pinctrl-names 	= "default";
+			pinctrl-0 	= <&pinctrl_sbc_serial1>;
+			clocks          = <&clk_sysin>;
+		};
+
+		i2c@fed40000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfed40000 0x110>;
+			interrupts	= <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_i2c0_default>;
+
+			status		= "disabled";
+		};
+
+		i2c@fed41000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfed41000 0x110>;
+			interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks 		= <&clk_s_a0_ls CLK_ICN_REG>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_i2c1_default>;
+
+			status		= "disabled";
+		};
+
+		i2c@fe540000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfe540000 0x110>;
+			interrupts	= <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			clocks		= <&clk_sysin>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_sbc_i2c0_default>;
+
+			status		= "disabled";
+		};
+
+		i2c@fe541000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfe541000 0x110>;
+			interrupts	= <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks		= <&clk_sysin>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_sbc_i2c1_default>;
+
+			status		= "disabled";
+		};
+
+		ethernet0: dwmac@fe810000 {
+			device_type 	= "network";
+			compatible	= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+			status 		= "disabled";
+			reg		= <0xfe810000 0x8000>;
+			reg-names	= "stmmaceth";
+
+			interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+			snps,pbl 	= <32>;
+			snps,mixed-burst;
+
+			st,syscon		= <&syscfg_rear 0x8bc>;
+			resets			= <&softreset STIH416_ETH0_SOFTRESET>;
+			reset-names		= "stmmaceth";
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_mii0>;
+			clock-names	= "stmmaceth", "sti-ethclk";
+			clocks		= <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>;
+		};
+
+		ethernet1: dwmac@fef08000 {
+			device_type = "network";
+			compatible		= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+			status 		= "disabled";
+			reg		= <0xfef08000 0x8000>;
+			reg-names	= "stmmaceth";
+			interrupts = <0 136 0>, <0 137 0>, <0 138 0>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+			snps,pbl	= <32>;
+			snps,mixed-burst;
+
+			st,syscon	= <&syscfg_sbc 0x7f0>;
+
+			resets		= <&softreset STIH416_ETH1_SOFTRESET>;
+			reset-names	= "stmmaceth";
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_mii1>;
+			clock-names	= "stmmaceth", "sti-ethclk";
+			clocks		= <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>;
+		};
+
+		rc: rc@fe518000 {
+			compatible	= "st,comms-irb";
+			reg		= <0xfe518000 0x234>;
+			interrupts	=  <0 203 0>;
+			rx-mode         = "infrared";
+			clocks		= <&clk_sysin>;
+			pinctrl-names 	= "default";
+			pinctrl-0	= <&pinctrl_ir>;
+			resets		= <&softreset STIH416_IRB_SOFTRESET>;
+		};
+
+		/* FSM */
+		spifsm: spifsm@fe902000 {
+			compatible	   = "st,spi-fsm";
+			reg		   = <0xfe902000 0x1000>;
+			pinctrl-0	   = <&pinctrl_fsm>;
+
+			st,syscfg	   = <&syscfg_rear>;
+			st,boot-device-reg = <0x958>;
+			st,boot-device-spi = <0x1a>;
+
+			status = "disabled";
+		};
+
+		keyscan: keyscan@fe4b0000 {
+			compatible = "st,sti-keyscan";
+			status = "disabled";
+			reg = <0xfe4b0000 0x2000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+			clocks = <&clk_sysin>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_keyscan>;
+			resets	= <&powerdown STIH416_KEYSCAN_POWERDOWN>,
+				  <&softreset STIH416_KEYSCAN_SOFTRESET>;
+		};
+
+		temp0 {
+			compatible = "st,stih416-sas-thermal";
+			clock-names = "thermal";
+			clocks = <&clockgen_c_vcc 14>;
+
+			status = "okay";
+		};
+
+		temp1@fdfe8000 {
+			compatible = "st,stih416-mpe-thermal";
+			reg = <0xfdfe8000 0x10>;
+			clocks = <&clockgen_e 3>;
+			clock-names = "thermal";
+			interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
+
+			status = "okay";
+		};
+
+		mmc0: sdhci@fe81e000 {
+			compatible	= "st,sdhci";
+			status		= "disabled";
+			reg		= <0xfe81e000 0x1000>;
+			interrupts	= <GIC_SPI 127 IRQ_TYPE_NONE>;
+			interrupt-names	= "mmcirq";
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_mmc0>;
+			clock-names	= "mmc";
+			clocks		= <&clk_s_a1_ls 1>;
+		};
+
+		mmc1: sdhci@fe81f000 {
+			compatible	= "st,sdhci";
+			status		= "disabled";
+			reg		= <0xfe81f000 0x1000>;
+			interrupts	= <GIC_SPI 128 IRQ_TYPE_NONE>;
+			interrupt-names	= "mmcirq";
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_mmc1>;
+			clock-names	= "mmc";
+			clocks		= <&clk_s_a1_ls 8>;
+		};
+
+		miphy365x_phy: phy@fe382000 {
+			compatible      = "st,miphy365x-phy";
+			st,syscfg	= <&syscfg_rear 0x824 0x828>;
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			ranges;
+
+			phy_port0: port@fe382000 {
+				#phy-cells = <1>;
+				reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
+				reg-names = "sata", "pcie";
+			};
+
+			phy_port1: port@fe38a000 {
+				#phy-cells = <1>;
+				reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;
+				reg-names = "sata", "pcie";
+			};
+		};
+
+		sata0: sata@fe380000 {
+			compatible      = "st,sti-ahci";
+			reg             = <0xfe380000 0x1000>;
+			interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
+			interrupt-names = "hostc";
+			phys	        = <&phy_port0 MIPHY_TYPE_SATA>;
+			phy-names       = "sata-phy";
+			resets	        = <&powerdown STIH416_SATA0_POWERDOWN>,
+					  <&softreset STIH416_SATA0_SOFTRESET>;
+			reset-names     = "pwr-dwn", "sw-rst";
+			clock-names     = "ahci_clk";
+			clocks	        = <&clk_s_a0_ls CLK_ICN_REG>;
+
+			status	        = "disabled";
+		};
+
+		usb2_phy: phy@0 {
+			compatible = "st,stih416-usb-phy";
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_rear>;
+			clocks = <&clk_sysin>;
+			clock-names = "osc_phy";
+		};
+
+		ehci0: usb@fe1ffe00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0xfe1ffe00 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB0_POWERDOWN>,
+				 <&softreset STIH416_USB0_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ohci0: usb@fe1ffc00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0xfe1ffc00 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			status = "okay";
+			resets = <&powerdown STIH416_USB0_POWERDOWN>,
+				 <&softreset STIH416_USB0_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ehci1: usb@fe203e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0xfe203e00 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB1_POWERDOWN>,
+				 <&softreset STIH416_USB1_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ohci1: usb@fe203c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0xfe203c00 0x100>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB1_POWERDOWN>,
+				 <&softreset STIH416_USB1_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ehci2: usb@fe303e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0xfe303e00 0x100>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB2_POWERDOWN>,
+				 <&softreset STIH416_USB2_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ohci2: usb@fe303c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0xfe303c00 0x100>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB2_POWERDOWN>,
+				 <&softreset STIH416_USB2_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ehci3: usb@fe343e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0xfe343e00 0x100>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB3_POWERDOWN>,
+				 <&softreset STIH416_USB3_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ohci3: usb@fe343c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0xfe343c00 0x100>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB3_POWERDOWN>,
+				 <&softreset STIH416_USB3_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+	};
+};
diff --git a/src/arm/stih418-b2199.dts b/src/arm/stih418-b2199.dts
new file mode 100644
index 000000000000..926235c08e4d
--- /dev/null
+++ b/src/arm/stih418-b2199.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2015 STMicroelectronics (R&D) Limited.
+ * Author: Maxime Coquelin <maxime.coquelin@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih418.dtsi"
+/ {
+	model = "STiH418 B2199";
+	compatible = "st,stih418-b2199", "st,stih418";
+
+	chosen {
+		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
+		linux,stdout-path = &sbc_serial0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0xc0000000>;
+	};
+
+	aliases {
+		ttyAS0 = &sbc_serial0;
+	};
+
+	soc {
+		sbc_serial0: serial@9530000 {
+			status = "okay";
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			red {
+				#gpio-cells = <2>;
+				label = "Front Panel LED";
+				gpios = <&pio4 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			green {
+				#gpio-cells = <2>;
+				gpios = <&pio1 3 0>;
+				default-state = "off";
+			};
+		};
+
+		i2c@9842000 {
+			status = "okay";
+		};
+
+		i2c@9843000 {
+			status = "okay";
+		};
+
+		i2c@9844000 {
+			status = "okay";
+		};
+
+		i2c@9845000 {
+			status = "okay";
+		};
+
+		i2c@9540000 {
+			status = "okay";
+		};
+
+		/* SSC11 to HDMI */
+		i2c@9541000 {
+			status = "okay";
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+	};
+};
diff --git a/src/arm/stih418-clock.dtsi b/src/arm/stih418-clock.dtsi
new file mode 100644
index 000000000000..0ab23daa2829
--- /dev/null
+++ b/src/arm/stih418-clock.dtsi
@@ -0,0 +1,348 @@
+/*
+ * Copyright (C) 2015 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <dt-bindings/clock/stih418-clks.h>
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		compatible = "st,stih418-clk", "simple-bus";
+
+		/*
+		 * Fixed 30MHz oscillator inputs to SoC
+		 */
+		clk_sysin: clk-sysin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+			clock-output-names = "CLK_SYSIN";
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: clk-m-a9-periphs {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a9>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9@92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9@92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+
+			clocks = <&clk_s_c0_flexgen 13>;
+
+			clock-output-names = "clk-m-a9-ext2f-div2";
+
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * Bootloader initialized system infrastructure clock for
+		 * serial devices.
+		 */
+		clk_ext2f_a9: clockgen-c0@13 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			clock-output-names = "clk-s-icn-reg-0";
+		};
+
+		clockgen-a@090ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0",
+						     "clk-ic-lmi1";
+			};
+		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+		};
+
+		clk_s_c0: clockgen-c@09103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-icn-reg",
+						     "clk-proc-bdisp-0",
+						     "clk-proc-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phyref",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp",
+						     "clk-tx-icn-hades",
+						     "clk-rx-icn-hades",
+						     "clk-icn-reg-16",
+						     "clk-pp-hevc",
+						     "clk-clust-hevc",
+						     "clk-hwpe-hevc",
+						     "clk-fc-hevc",
+						     "clk-proc-mixer",
+						     "clk-proc-sc",
+						     "clk-avsp-hevc";
+			};
+		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0@09104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff",
+						     "clk-pcmr10-master",
+						     "clk-usb2-phy";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clockgen-d2@x9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "",
+						     "",
+						     "",
+						     "",
+						     "clk-tmds-hdmi-div2",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "clk-tmds-hdmi",
+						     "clk-ref-hdmiphy",
+						     "", "", "", "", "",
+						     "", "", "", "", "",
+						     "", "", "", "", "",
+						     "", "", "", "", "",
+						     "", "", "", "", "",
+						     "", "", "", "", "",
+						     "", "clk-vp9";
+			};
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3@9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
+	};
+};
diff --git a/src/arm/stih418.dtsi b/src/arm/stih418.dtsi
new file mode 100644
index 000000000000..354d90f521b6
--- /dev/null
+++ b/src/arm/stih418.dtsi
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih418-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stih410-pinctrl.dtsi"
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+		};
+	};
+
+	soc {
+		usb2_picophy1: phy2 {
+			compatible = "st,stih407-usb2-phy";
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xf8 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY0_RESET>;
+			reset-names = "global", "port";
+		};
+
+		usb2_picophy2: phy3 {
+			compatible = "st,stih407-usb2-phy";
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_core 0xfc 0xf4>;
+			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+				 <&picophyreset STIH407_PICOPHY1_RESET>;
+			reset-names = "global", "port";
+		};
+
+		ohci0: usb@9a03c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a03c00 0x100>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+		};
+
+		ehci0: usb@9a03e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a03e00 0x100>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy1>;
+			phy-names = "usb";
+		};
+
+		ohci1: usb@9a83c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0x9a83c00 0x100>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+		};
+
+		ehci1: usb@9a83e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0x9a83e00 0x100>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+			reset-names = "power", "softreset";
+			phys = <&usb2_picophy2>;
+			phy-names = "usb";
+		};
+	};
+};
diff --git a/src/arm/stih41x-b2000.dtsi b/src/arm/stih41x-b2000.dtsi
new file mode 100644
index 000000000000..5f91f455f05b
--- /dev/null
+++ b/src/arm/stih41x-b2000.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include <dt-bindings/input/input.h>
+/ {
+
+	memory{
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
+		linux,stdout-path = &serial2;
+	};
+
+	aliases {
+		ttyAS0 = &serial2;
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+	};
+
+	soc {
+		serial2: serial@fed32000 {
+			status = "okay";
+		};
+
+		leds {
+			compatible	= "gpio-leds";
+			fp_led {
+				#gpio-cells = <1>;
+				label	= "Front Panel LED";
+				gpios	= <&pio105 7>;
+				linux,default-trigger	= "heartbeat";
+			};
+		};
+
+		/* HDMI Tx I2C */
+		i2c@fed41000 {
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			i2c-min-scl-pulse-width-us = <0>;
+			i2c-min-sda-pulse-width-us = <5>;
+
+			status = "okay";
+		};
+
+		ethernet0: dwmac@fe810000 {
+			status			= "okay";
+			phy-mode		= "mii";
+			pinctrl-0		= <&pinctrl_mii0>;
+
+			snps,reset-gpio 	= <&pio106 2>;
+			snps,reset-active-low;
+			snps,reset-delays-us 	= <0 10000 10000>;
+		};
+
+		ethernet1: dwmac@fef08000 {
+			status			= "disabled";
+			phy-mode		= "mii";
+			st,tx-retime-src	= "txclk";
+
+			snps,reset-gpio 	= <&pio4 7>;
+			snps,reset-active-low;
+			snps,reset-delays-us 	= <0 10000 10000>;
+		};
+
+		keyscan: keyscan@fe4b0000 {
+			keypad,num-rows = <4>;
+			keypad,num-columns = <4>;
+			st,debounce-us = <5000>;
+			linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13)
+					 MATRIX_KEY(0x00, 0x01, KEY_F9)
+					 MATRIX_KEY(0x00, 0x02, KEY_F5)
+					 MATRIX_KEY(0x00, 0x03, KEY_F1)
+					 MATRIX_KEY(0x01, 0x00, KEY_F14)
+					 MATRIX_KEY(0x01, 0x01, KEY_F10)
+					 MATRIX_KEY(0x01, 0x02, KEY_F6)
+					 MATRIX_KEY(0x01, 0x03, KEY_F2)
+					 MATRIX_KEY(0x02, 0x00, KEY_F15)
+					 MATRIX_KEY(0x02, 0x01, KEY_F11)
+					 MATRIX_KEY(0x02, 0x02, KEY_F7)
+					 MATRIX_KEY(0x02, 0x03, KEY_F3)
+					 MATRIX_KEY(0x03, 0x00, KEY_F16)
+					 MATRIX_KEY(0x03, 0x01, KEY_F12)
+					 MATRIX_KEY(0x03, 0x02, KEY_F8)
+					 MATRIX_KEY(0x03, 0x03, KEY_F4) >;
+		};
+	};
+};
diff --git a/src/arm/stih41x-b2020.dtsi b/src/arm/stih41x-b2020.dtsi
new file mode 100644
index 000000000000..487d7d87dbef
--- /dev/null
+++ b/src/arm/stih41x-b2020.dtsi
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih41x-b2020x.dtsi"
+/ {
+	memory{
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
+		linux,stdout-path = &sbc_serial1;
+	};
+
+	aliases {
+		ttyAS0 = &sbc_serial1;
+		ethernet1 = &ethernet1;
+	};
+	soc {
+		sbc_serial1: serial@fe531000 {
+			status = "okay";
+		};
+
+		leds {
+			compatible	= "gpio-leds";
+			red {
+				#gpio-cells = <1>;
+				label	= "Front Panel LED";
+				gpios	= <&pio4 1>;
+				linux,default-trigger	= "heartbeat";
+			};
+			green {
+				gpios	= <&pio4 7>;
+				default-state = "off";
+			};
+		};
+
+		i2c@fed40000 {
+			status = "okay";
+		};
+
+		/* HDMI Tx I2C */
+		i2c@fed41000 {
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			i2c-min-scl-pulse-width-us = <0>;
+			i2c-min-sda-pulse-width-us = <5>;
+
+			status = "okay";
+		};
+
+		i2c@fe540000 {
+			status = "okay";
+		};
+
+		i2c@fe541000 {
+			status = "okay";
+		};
+
+		ethernet1: dwmac@fef08000 {
+			status			= "okay";
+			phy-mode		= "rgmii-id";
+			max-speed		= <1000>;
+			st,tx-retime-src	= "clk_125";
+			snps,reset-gpio 	= <&pio3 0>;
+			snps,reset-active-low;
+			snps,reset-delays-us 	= <0 10000 10000>;
+
+			pinctrl-0	= <&pinctrl_rgmii1>;
+		};
+
+		mmc0: sdhci@fe81e000 {
+			bus-width = <8>;
+		};
+	};
+};
diff --git a/src/arm/stih41x-b2020x.dtsi b/src/arm/stih41x-b2020x.dtsi
new file mode 100644
index 000000000000..f797a0607382
--- /dev/null
+++ b/src/arm/stih41x-b2020x.dtsi
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ * Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/ {
+	soc {
+		mmc0: sdhci@fe81e000 {
+			status = "okay";
+		};
+
+		spifsm: spifsm@fe902000 {
+			#address-cells = <1>;
+			#size-cells    = <1>;
+
+			status = "okay";
+
+			partition@0 {
+				label = "SerialFlash1";
+				reg   = <0x00000000 0x00500000>;
+			};
+
+			partition@500000 {
+				label = "SerialFlash2";
+				reg   = <0x00500000 0x00b00000>;
+			};
+		};
+	};
+};
diff --git a/src/arm/stih41x.dtsi b/src/arm/stih41x.dtsi
new file mode 100644
index 000000000000..5cb0e63376b5
--- /dev/null
+++ b/src/arm/stih41x.dtsi
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	intc: interrupt-controller@fffe1000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0xfffe1000 0x1000>,
+		      <0xfffe0100 0x100>;
+	};
+
+	scu@fffe0000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0xfffe0000 0x1000>;
+	};
+
+	timer@fffe0200 {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xfffe0200 0x100>;
+		interrupts = <1 11 0x04>;
+		clocks = <&arm_periph_clk>;
+	};
+};
diff --git a/src/arm/stihxxx-b2120.dtsi b/src/arm/stihxxx-b2120.dtsi
new file mode 100644
index 000000000000..c1d859092be7
--- /dev/null
+++ b/src/arm/stihxxx-b2120.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+	soc {
+		sbc_serial0: serial@9530000 {
+			status = "okay";
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			red {
+				#gpio-cells = <2>;
+				label = "Front Panel LED";
+				gpios = <&pio4 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			green {
+				#gpio-cells = <2>;
+				gpios = <&pio1 3 0>;
+				default-state = "off";
+			};
+		};
+
+		i2c@9842000 {
+			status = "okay";
+		};
+
+		i2c@9843000 {
+			status = "okay";
+		};
+
+		i2c@9844000 {
+			status = "okay";
+		};
+
+		i2c@9845000 {
+			status = "okay";
+		};
+
+		i2c@9540000 {
+			status = "okay";
+		};
+
+		/* SSC11 to HDMI */
+		hdmiddc: i2c@9541000 {
+			status = "okay";
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+
+			phy_port0: port@9b22000 {
+				st,osc-rdy;
+			};
+
+			phy_port1: port@9b2a000 {
+				st,osc-force-ext;
+			};
+		};
+	};
+};
diff --git a/src/arm/sun4i-a10-a1000.dts b/src/arm/sun4i-a10-a1000.dts
new file mode 100644
index 000000000000..b67e5be618cf
--- /dev/null
+++ b/src/arm/sun4i-a10-a1000.dts
@@ -0,0 +1,192 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Mele A1000";
+	compatible = "mele,a1000", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			phy-supply = <&reg_emac_3v3>;
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			emac_power_pin_a1000: emac_power_pin@0 {
+				allwinner,pins = "PH15";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			led_pins_a1000: led_pins@0 {
+				allwinner,pins = "PH10", "PH20";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_a1000>;
+
+		red {
+			label = "a1000:red:usr";
+			gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "a1000:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emac_power_pin_a1000>;
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun4i-a10-ba10-tvbox.dts b/src/arm/sun4i-a10-ba10-tvbox.dts
new file mode 100644
index 000000000000..490b77c9bb36
--- /dev/null
+++ b/src/arm/sun4i-a10-ba10-tvbox.dts
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BA10 tvbox";
+	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			usb2_vbus_pin_a: usb2_vbus_pin@0 {
+				allwinner,pins = "PH12";
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun4i-a10-chuwi-v7-cw0825.dts b/src/arm/sun4i-a10-chuwi-v7-cw0825.dts
new file mode 100644
index 000000000000..58214f249598
--- /dev/null
+++ b/src/arm/sun4i-a10-chuwi-v7-cw0825.dts
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Chuwi V7 CW0825";
+	compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/src/arm/sun4i-a10-cubieboard.dts b/src/arm/sun4i-a10-cubieboard.dts
new file mode 100644
index 000000000000..4260c2b47607
--- /dev/null
+++ b/src/arm/sun4i-a10-cubieboard.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Cubietech Cubieboard";
+	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			led_pins_cubieboard: led_pins@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				reg = <0x34>;
+				interrupts = <0>;
+			};
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		spi0: spi@01c05000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard>;
+
+		blue {
+			label = "cubieboard:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
+		};
+
+		green {
+			label = "cubieboard:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
diff --git a/src/arm/sun4i-a10-hackberry.dts b/src/arm/sun4i-a10-hackberry.dts
new file mode 100644
index 000000000000..d3f73ea25567
--- /dev/null
+++ b/src/arm/sun4i-a10-hackberry.dts
@@ -0,0 +1,175 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Miniand Hackberry";
+	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy0>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			phy-supply = <&reg_emac_3v3>;
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pio: pinctrl@01c20800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&hackberry_hogs>;
+
+			hackberry_hogs: hogs@0 {
+				allwinner,pins = "PH19";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
+					allwinner,pins = "PH12";
+					allwinner,function = "gpio_out";
+					allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+					allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		pinctrl-0 = <&usb2_vbus_pin_hackberry>;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun4i-a10-hyundai-a7hd.dts b/src/arm/sun4i-a10-hyundai-a7hd.dts
new file mode 100644
index 000000000000..c88382aacc36
--- /dev/null
+++ b/src/arm/sun4i-a10-hyundai-a7hd.dts
@@ -0,0 +1,105 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Hyundai A7HD";
+	compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb2_vbus_pin_a {
+	allwinner,pins = "PH6";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/src/arm/sun4i-a10-inet97fv2.dts b/src/arm/sun4i-a10-inet97fv2.dts
new file mode 100644
index 000000000000..482914333bba
--- /dev/null
+++ b/src/arm/sun4i-a10-inet97fv2.dts
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2014 Open Source Support GmbH
+ *
+ * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "INet-97F Rev 02";
+	compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun4i-a10-marsboard.dts b/src/arm/sun4i-a10-marsboard.dts
new file mode 100644
index 000000000000..9ee86a700c2b
--- /dev/null
+++ b/src/arm/sun4i-a10-marsboard.dts
@@ -0,0 +1,183 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A10";
+	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_marsboard>;
+
+		red1 {
+			label = "marsboard:red1:usr";
+			gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		red2 {
+			label = "marsboard:red2:usr";
+			gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		red3 {
+			label = "marsboard:red3:usr";
+			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		red4 {
+			label = "marsboard:red4:usr";
+			gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_marsboard: led_pins@0 {
+		allwinner,pins = "PB5", "PB6", "PB7", "PB8";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/src/arm/sun4i-a10-mini-xplus.dts b/src/arm/sun4i-a10-mini-xplus.dts
new file mode 100644
index 000000000000..eb5fd6904a69
--- /dev/null
+++ b/src/arm/sun4i-a10-mini-xplus.dts
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "PineRiver Mini X-Plus";
+	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			ir0_pins_a: ir0@0 {
+				/* The ir receiver is not always populated */
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun4i-a10-mk802.dts b/src/arm/sun4i-a10-mk802.dts
new file mode 100644
index 000000000000..e9a6886f0d51
--- /dev/null
+++ b/src/arm/sun4i-a10-mk802.dts
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802";
+	compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	usb2_vbus_pin_mk802: usb2_vbus_pin@0 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_mk802>;
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/src/arm/sun4i-a10-mk802ii.dts b/src/arm/sun4i-a10-mk802ii.dts
new file mode 100644
index 000000000000..802eda494d1c
--- /dev/null
+++ b/src/arm/sun4i-a10-mk802ii.dts
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802ii";
+	compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/src/arm/sun4i-a10-olinuxino-lime.dts b/src/arm/sun4i-a10-olinuxino-lime.dts
new file mode 100644
index 000000000000..ab7891c43231
--- /dev/null
+++ b/src/arm/sun4i-a10-olinuxino-lime.dts
@@ -0,0 +1,175 @@
+/*
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A10-OLinuXino-LIME";
+	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+				allwinner,pins = "PC3";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			led_pins_olinuxinolime: led_pins@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a10-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun4i-a10-pcduino.dts b/src/arm/sun4i-a10-pcduino.dts
new file mode 100644
index 000000000000..9d1e5482cf82
--- /dev/null
+++ b/src/arm/sun4i-a10-pcduino.dts
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "LinkSprite pcDuino";
+	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			led_pins_pcduino: led_pins@0 {
+				allwinner,pins = "PH15", "PH16";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			key_pins_pcduino: key_pins@0 {
+				allwinner,pins = "PH17", "PH18", "PH19";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_pcduino>;
+
+		tx {
+			label = "pcduino:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rx {
+			label = "pcduino:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_pcduino>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+
+		button@1 {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button@2 {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun4i-a10.dtsi b/src/arm/sun4i-a10.dtsi
new file mode 100644
index 000000000000..5c2925831f20
--- /dev/null
+++ b/src/arm/sun4i-a10.dtsi
@@ -0,0 +1,969 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>, <&ahb_gates 46>;
+			status = "disabled";
+		};
+
+		framebuffer@2 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
+				 <&ahb_gates 46>;
+			status = "disabled";
+		};
+
+		framebuffer@3 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>, <&ahb_gates 46>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&cpu>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz    uV */
+				1056000 1500000
+				1008000 1400000
+				912000  1350000
+				864000  1300000
+				624000  1250000
+				>;
+			#cooling-cells = <2>;
+			cooling-min-level = <0>;
+			cooling-max-level = <4>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <850000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		/* dummy is 200M */
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		axi_gates: clk@01c2005c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "axi_dram";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "ahb";
+		};
+
+		ahb_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-output-names = "ahb_usb0", "ahb_ehci0",
+				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
+				"ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+				"ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
+				"ahb_sdram", "ahb_ace",	"ahb_emac", "ahb_ts",
+				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
+				"ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
+				"ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
+				"ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
+				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
+				"ahb_de_fe1", "ahb_mp", "ahb_mali400";
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-apb0-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_codec", "apb0_spdif",
+				"apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
+				"apb0_ir1", "apb0_keypad";
+		};
+
+		apb1: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1";
+		};
+
+		apb1_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-apb1-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+				"apb1_i2c2", "apb1_can", "apb1_scr",
+				"apb1_ps20", "apb1_ps21", "apb1_uart0",
+				"apb1_uart1", "apb1_uart2", "apb1_uart3",
+				"apb1_uart4", "apb1_uart5", "apb1_uart6",
+				"apb1_uart7";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mmc3_clk: clk@01c20094 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20094 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		pata_clk: clk@01c200ac {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200ac 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "pata";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		ir1_clk: clk@01c200b4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir1";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+		};
+
+		spi3_clk: clk@01c200d4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200d4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi3";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@01c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ahb_gates 17>;
+			status = "disabled";
+		};
+
+		mdio: mdio@01c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <32>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <33>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <34>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ahb_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <35>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <64>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@01c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <56>;
+			clocks = <&pll6 0>, <&ahb_gates 25>;
+			status = "disabled";
+		};
+
+		ehci1: usb@01c1c000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <40>;
+			clocks = <&ahb_gates 3>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@01c1c400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <65>;
+			clocks = <&usb_clk 7>, <&ahb_gates 4>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@01c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <50>;
+			clocks = <&ahb_gates 23>, <&spi3_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun4i-a10-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			pwm1_pins_a: pwm1@0 {
+				allwinner,pins = "PI3";
+				allwinner,function = "pwm";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_b: uart0@1 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PA10", "PA11";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+				allwinner,pins = "PH1";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			ir0_pins_a: ir0@0 {
+				allwinner,pins = "PB3","PB4";
+				allwinner,function = "ir0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir1_pins_a: ir1@0 {
+				allwinner,pins = "PB22","PB23";
+				allwinner,function = "ir1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi0_pins_a: spi0@0 {
+				allwinner,pins = "PI10", "PI11", "PI12", "PI13";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi1_pins_a: spi1@0 {
+				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,function = "spi1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_pins_a: spi2@0 {
+				allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_pins_b: spi2@1 {
+				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ps20_pins_a: ps20@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "ps2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ps21_pins_a: ps21@0 {
+				allwinner,pins = "PH12", "PH13";
+				allwinner,function = "ps2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		rtc: rtc@01c20d00 {
+			compatible = "allwinner,sun4i-a10-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <24>;
+		};
+
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun4i-a10-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir0: ir@01c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@01c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 7>, <&ir1_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <6>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <17>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 20>;
+			status = "disabled";
+		};
+
+		uart5: serial@01c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <18>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 21>;
+			status = "disabled";
+		};
+
+		uart6: serial@01c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <19>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 22>;
+			status = "disabled";
+		};
+
+		uart7: serial@01c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 23>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ps20: ps2@01c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <62>;
+			clocks = <&apb1_gates 6>;
+			status = "disabled";
+		};
+
+		ps21: ps2@01c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <63>;
+			clocks = <&apb1_gates 7>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/sun5i-a10s-mk802.dts b/src/arm/sun5i-a10s-mk802.dts
new file mode 100644
index 000000000000..b21af87d9eae
--- /dev/null
+++ b/src/arm/sun5i-a10s-mk802.dts
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "MK802-A10s";
+	compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_mk802>;
+
+		red {
+			label = "mk802:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_mk802: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
+		allwinner,pins = "PB10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_mk802>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/src/arm/sun5i-a10s-olinuxino-micro.dts b/src/arm/sun5i-a10s-olinuxino-micro.dts
new file mode 100644
index 000000000000..2bbc93b935ca
--- /dev/null
+++ b/src/arm/sun5i-a10s-olinuxino-micro.dts
@@ -0,0 +1,248 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A10s-Olinuxino Micro";
+	compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+	};
+
+	soc@01c00000 {
+		emac: ethernet@01c0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins_a>;
+			phy = <&phy1>;
+			status = "okay";
+		};
+
+		mdio@01c0b080 {
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc1: mmc@01c10000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+				allwinner,pins = "PG1";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+				allwinner,pins = "PG13";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			led_pins_olinuxino: led_pins@0 {
+				allwinner,pins = "PE3";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
+				allwinner,pins = "PB10";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		lradc: lradc@01c22800 {
+			vref-supply = <&reg_vcc3v0>;
+			status = "okay";
+
+			button@191 {
+				label = "Volume Up";
+				linux,code = <KEY_VOLUMEUP>;
+				channel = <0>;
+				voltage = <191274>;
+			};
+
+			button@392 {
+				label = "Volume Down";
+				linux,code = <KEY_VOLUMEDOWN>;
+				channel = <0>;
+				voltage = <392644>;
+			};
+
+			button@601 {
+				label = "Menu";
+				linux,code = <KEY_MENU>;
+				channel = <0>;
+				voltage = <601151>;
+			};
+
+			button@795 {
+				label = "Enter";
+				linux,code = <KEY_ENTER>;
+				channel = <0>;
+				voltage = <795090>;
+			};
+
+			button@987 {
+				label = "Home";
+				linux,code = <KEY_HOMEPAGE>;
+				channel = <0>;
+				voltage = <987387>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		uart2: serial@01c28800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins_a>;
+			status = "okay";
+		};
+
+		uart3: serial@01c28c00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+
+			at24@50 {
+				compatible = "at,24c16";
+				pagesize = <16>;
+				reg = <0x50>;
+				read-only;
+			};
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		green {
+			label = "a10s-olinuxino-micro:green:usr";
+			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
+		gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun5i-a10s-r7-tv-dongle.dts b/src/arm/sun5i-a10s-r7-tv-dongle.dts
new file mode 100644
index 000000000000..7deddfc9df8b
--- /dev/null
+++ b/src/arm/sun5i-a10s-r7-tv-dongle.dts
@@ -0,0 +1,139 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "R7 A10s hdmi tv-stick";
+	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc1: mmc@01c10000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins_a>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			non-removable;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+				allwinner,pins = "PG1";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			led_pins_r7: led_pins@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+				allwinner,pins = "PG13";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_r7>;
+
+		green {
+			label = "r7-tv-dongle:green:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_r7>;
+		gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun5i-a10s.dtsi b/src/arm/sun5i-a10s.dtsi
new file mode 100644
index 000000000000..2fd8988f310c
--- /dev/null
+++ b/src/arm/sun5i-a10s.dtsi
@@ -0,0 +1,659 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		/* dummy is 200M */
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		axi_gates: clk@01c2005c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "axi_dram";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "ahb";
+		};
+
+		ahb_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
+				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+				"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
+				"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
+				"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
+				"apb0_ir", "apb0_keypad";
+		};
+
+		apb1: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1";
+		};
+
+		apb1_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+				"apb1_i2c2", "apb1_uart0", "apb1_uart1",
+				"apb1_uart2", "apb1_uart3";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mbus";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@01c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ahb_gates 17>;
+			status = "disabled";
+		};
+
+		mdio: mdio@01c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <32>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <33>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <34>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun5i-a10s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB19", "PB20";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart2_pins_a: uart2@0 {
+				allwinner,pins = "PC18", "PC19";
+				allwinner,function = "uart2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_a: uart3@0 {
+				allwinner,pins = "PG9", "PG10";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB15", "PB16";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB17", "PB18";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@01c2b000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@01c2b400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			status = "disabled";
+		};
+
+		timer@01c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ahb_gates 28>;
+		};
+	};
+};
diff --git a/src/arm/sun5i-a13-hsg-h702.dts b/src/arm/sun5i-a13-hsg-h702.dts
new file mode 100644
index 000000000000..03aa04555630
--- /dev/null
+++ b/src/arm/sun5i-a13-hsg-h702.dts
@@ -0,0 +1,167 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "HSG H702";
+	compatible = "hsg,h702", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_ldo3>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc0_cd_pin_h702: mmc0_cd_pin@0 {
+				allwinner,pins = "PG0";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		uart1: serial@01c28400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins_b>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				reg = <0x34>;
+				interrupts = <0>;
+			};
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+
+			pcf8563: rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+	};
+};
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
diff --git a/src/arm/sun5i-a13-olinuxino-micro.dts b/src/arm/sun5i-a13-olinuxino-micro.dts
new file mode 100644
index 000000000000..03deb84268ce
--- /dev/null
+++ b/src/arm/sun5i-a13-olinuxino-micro.dts
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
+ * Copyright 2013 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A13-Olinuxino Micro";
+	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+				allwinner,pins = "PG0";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			led_pins_olinuxinom: led_pins@0 {
+				allwinner,pins = "PG9";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
+				allwinner,pins = "PG11";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart1: serial@01c28400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins_b>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinom>;
+
+		power {
+			label = "a13-olinuxino-micro:green:power";
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
+		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun5i-a13-olinuxino.dts b/src/arm/sun5i-a13-olinuxino.dts
new file mode 100644
index 000000000000..6b24876ed462
--- /dev/null
+++ b/src/arm/sun5i-a13-olinuxino.dts
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A13-Olinuxino";
+	compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+				allwinner,pins = "PG0";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			led_pins_olinuxino: led_pins@0 {
+				allwinner,pins = "PG9";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
+				allwinner,pins = "PG11";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		lradc: lradc@01c22800 {
+			vref-supply = <&reg_vcc3v0>;
+			status = "okay";
+
+			button@191 {
+				label = "Volume Up";
+				linux,code = <KEY_VOLUMEUP>;
+				channel = <0>;
+				voltage = <191274>;
+			};
+
+			button@392 {
+				label = "Volume Down";
+				linux,code = <KEY_VOLUMEDOWN>;
+				channel = <0>;
+				voltage = <392644>;
+			};
+
+			button@601 {
+				label = "Menu";
+				linux,code = <KEY_MENU>;
+				channel = <0>;
+				voltage = <601151>;
+			};
+
+			button@795 {
+				label = "Enter";
+				linux,code = <KEY_ENTER>;
+				channel = <0>;
+				voltage = <795090>;
+			};
+
+			button@987 {
+				label = "Home";
+				linux,code = <KEY_HOMEPAGE>;
+				channel = <0>;
+				voltage = <987387>;
+			};
+		};
+
+		uart1: serial@01c28400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_pins_b>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupts = <0>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		power {
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
+		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun5i-a13.dtsi b/src/arm/sun5i-a13.dtsi
new file mode 100644
index 000000000000..f8818f1edbbe
--- /dev/null
+++ b/src/arm/sun5i-a13.dtsi
@@ -0,0 +1,622 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&cpu>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz    uV */
+				1104000	1500000
+				1008000 1400000
+				912000  1350000
+				864000  1300000
+				624000  1200000
+				576000  1200000
+				432000  1200000
+				>;
+			#cooling-cells = <2>;
+			cooling-min-level = <0>;
+			cooling-max-level = <6>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <850000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		/* dummy is 200M */
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		axi_gates: clk@01c2005c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "axi_dram";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "ahb";
+		};
+
+		ahb_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
+				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
+				"ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
+				"ahb_de_fe", "ahb_iep", "ahb_mali400";
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
+		};
+
+		apb1: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1";
+		};
+
+		apb1_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun5i-a13-apb1-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+				"apb1_i2c2", "apb1_uart1", "apb1_uart3";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mbus";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <32>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <34>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun5i-a13-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart1_pins_a: uart1@0 {
+				allwinner,pins = "PE10", "PE11";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart1_pins_b: uart1@1 {
+				allwinner,pins = "PG3", "PG4";
+				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB15", "PB16";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB17", "PB18";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		timer@01c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ahb_gates 28>;
+		};
+	};
+};
diff --git a/src/arm/sun6i-a31-app4-evb1.dts b/src/arm/sun6i-a31-app4-evb1.dts
new file mode 100644
index 000000000000..be9f5ee6b59e
--- /dev/null
+++ b/src/arm/sun6i-a31-app4-evb1.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2014 Boris Brezillon
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
+	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		pio: pinctrl@01c20800 {
+			usb1_vbus_pin_a: usb1_vbus_pin@0 {
+				allwinner,pins = "PH27";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		usbphy: phy@01c19400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c1a000 {
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_a>;
+		gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun6i-a31-colombus.dts b/src/arm/sun6i-a31-colombus.dts
new file mode 100644
index 000000000000..84630e56acd7
--- /dev/null
+++ b/src/arm/sun6i-a31-colombus.dts
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "WITS A31 Colombus Evaluation Board";
+	compatible = "wits,colombus", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
+			vmmc-supply = <&reg_vcc3v0>;
+			bus-width = <4>;
+			cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c19400 {
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1b000 {
+			status = "okay";
+		};
+
+		pio: pinctrl@01c20800 {
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
+				allwinner,pins = "PA8";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
+				allwinner,pins = "PH24";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "fail";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_pin_colombus>;
+		gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun6i-a31-hummingbird.dts b/src/arm/sun6i-a31-hummingbird.dts
new file mode 100644
index 000000000000..8b61b1b342e0
--- /dev/null
+++ b/src/arm/sun6i-a31-hummingbird.dts
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2014 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Merrii A31 Hummingbird";
+	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 30000>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	/* pull-ups and devices require AXP221 DLDO3 */
+	status = "failed";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc0_pins_a {
+	/* external pull-ups missing for some pins */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb1_vbus_pin_a {
+	/* different pin from sunxi-common-regulators */
+	allwinner,pins = "PH24";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/src/arm/sun6i-a31-m9.dts b/src/arm/sun6i-a31-m9.dts
new file mode 100644
index 000000000000..139a21e6b695
--- /dev/null
+++ b/src/arm/sun6i-a31-m9.dts
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Mele M9 / A1000G Quad top set box";
+	compatible = "mele,m9", "allwinner,sun6i-a31";
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c19400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c1a000 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1b000 {
+			status = "okay";
+		};
+
+		pio: pinctrl@01c20800 {
+			led_pins_m9: led_pins@0 {
+				allwinner,pins = "PH13";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+				allwinner,pins = "PH22";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+				allwinner,pins = "PC27";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		gmac: ethernet@01c30000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+
+		ir@01f02000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_m9>;
+
+		blue {
+			label = "m9:blue:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_pin_m9>;
+		gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun6i-a31.dtsi b/src/arm/sun6i-a31.dtsi
new file mode 100644
index 000000000000..fa2f403ccf28
--- /dev/null
+++ b/src/arm/sun6i-a31.dtsi
@@ -0,0 +1,978 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&pll6 0>;
+			status = "disabled";
+		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll6 0>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun6i-a31";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6", "pll6x2";
+		};
+
+		cpu: cpu@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20050 0x4>;
+
+			/*
+			 * PLL1 is listed twice here.
+			 * While it looks suspicious, it's actually documented
+			 * that way both in the datasheet and in the code from
+			 * Allwinner.
+			 */
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb1: ahb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+			clock-output-names = "ahb1";
+		};
+
+		ahb1_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
+					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
+					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
+					"ahb1_nand0", "ahb1_sdram",
+					"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
+					"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
+					"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
+					"ahb1_ehci1", "ahb1_ohci0",
+					"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
+					"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
+					"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
+					"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
+					"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
+					"ahb1_drc0", "ahb1_drc1";
+		};
+
+		apb1: apb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+			clock-output-names = "apb1";
+		};
+
+		apb1_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_codec", "apb1_digital_mic",
+					"apb1_pio", "apb1_daudio0",
+					"apb1_daudio1";
+		};
+
+		apb2: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+			clock-output-names = "apb2";
+		};
+
+		apb2_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb2>;
+			clock-output-names = "apb2_i2c0", "apb2_i2c1",
+					"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
+					"apb2_uart1", "apb2_uart2", "apb2_uart3",
+					"apb2_uart4", "apb2_uart5";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mmc3_clk: clk@01c20094 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20094 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "spi2";
+		};
+
+		spi3_clk: clk@01c200ac {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200ac 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "spi3";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
+					     "usb_ohci0", "usb_ohci1",
+					     "usb_ohci2";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders used in the gmac_tx
+		 * clock. The gmac driver will choose one parent depending on the PHY
+		 * interface mode, using clk_set_rate auto-reparenting.
+		 * The actual TX clock rate is not controlled by the gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk@1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk@2 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@01c200d0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c200d0 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun6i-a31-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 6>;
+			resets = <&ahb1_rst 6>;
+			#dma-cells = <1>;
+
+			/* DMA controller requires AHB1 clocked from PLL6 */
+			assigned-clocks = <&ahb1>;
+			assigned-clock-parents = <&pll6 0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb1_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 8>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb1_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 9>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb1_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 10>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ahb1_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 11>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			compatible = "allwinner,sun6i-a31-usb-phy";
+			reg = <0x01c19400 0x10>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&usb_clk 8>,
+				 <&usb_clk 9>,
+				 <&usb_clk 10>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&usb_clk 0>,
+				 <&usb_clk 1>,
+				 <&usb_clk 2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 26>;
+			resets = <&ahb1_rst 26>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+			resets = <&ahb1_rst 29>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci1: usb@01c1b000 {
+			compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 27>;
+			resets = <&ahb1_rst 27>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@01c1b400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 30>, <&usb_clk 17>;
+			resets = <&ahb1_rst 30>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@01c1c400 {
+			compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 31>, <&usb_clk 18>;
+			resets = <&ahb1_rst 31>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun6i-a31-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PH14", "PH15";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PH16", "PH17";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PH18", "PH19";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_pins_mii_a: gmac_mii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA8", "PA9", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA26", "PA27";
+				allwinner,function = "gmac";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_pins_gmii_a: gmac_gmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA4", "PA5", "PA6", "PA7",
+						"PA8", "PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14",	"PA15",
+						"PA16", "PA17", "PA18", "PA19",
+						"PA20", "PA21", "PA22", "PA23",
+						"PA24", "PA25", "PA26", "PA27";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in GMII mode run at 125MHz and
+				 * might need a higher signal drive strength
+				 */
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_pins_rgmii_a: gmac_rgmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
+						"PA9", "PA10", "PA11",
+						"PA12", "PA13", "PA14", "PA19",
+						"PA20", "PA25", "PA26", "PA27";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ahb1_rst: reset@01c202c0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-ahb1-reset";
+			reg = <0x01c202c0 0xc>;
+		};
+
+		apb1_rst: reset@01c202d0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d0 0x4>;
+		};
+
+		apb2_rst: reset@01c202d8 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d8 0x4>;
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt1: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun6i-a31-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 16>;
+			resets = <&apb2_rst 16>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 17>;
+			resets = <&apb2_rst 17>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 18>;
+			resets = <&apb2_rst 18>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 19>;
+			resets = <&apb2_rst 19>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 20>;
+			resets = <&apb2_rst 20>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart5: serial@01c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 21>;
+			resets = <&apb2_rst 21>;
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 0>;
+			resets = <&apb2_rst 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 1>;
+			resets = <&apb2_rst 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 2>;
+			resets = <&apb2_rst 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@01c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 3>;
+			resets = <&apb2_rst 3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gmac: ethernet@01c30000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c30000 0x1054>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			resets = <&ahb1_rst 17>;
+			reset-names = "stmmaceth";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		timer@01c60000 {
+			compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 19>;
+			resets = <&ahb1_rst 19>;
+		};
+
+		spi0: spi@01c68000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 20>;
+			status = "disabled";
+		};
+
+		spi1: spi@01c69000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c69000 0x1000>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 24>, <&dma 24>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 21>;
+			status = "disabled";
+		};
+
+		spi2: spi@01c6a000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6a000 0x1000>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 25>, <&dma 25>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 22>;
+			status = "disabled";
+		};
+
+		spi3: spi@01c6b000 {
+			compatible = "allwinner,sun6i-a31-spi";
+			reg = <0x01c6b000 0x1000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 23>, <&spi3_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 26>, <&dma 26>;
+			dma-names = "rx", "tx";
+			resets = <&ahb1_rst 23>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		rtc: rtc@01f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nmi_intc: interrupt-controller@01f00c0c {
+			compatible = "allwinner,sun6i-a31-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01f00c0c 0x38>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@01f01400 {
+			compatible = "allwinner,sun6i-a31-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "allwinner,sun6i-a31-ar100-clk";
+				#clock-cells = <0>;
+				clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun6i-a31-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_ir",
+						"apb0_timer", "apb0_p2wi",
+						"apb0_uart", "apb0_1wire",
+						"apb0_i2c";
+			};
+
+			ir_clk: ir_clk {
+				#clock-cells = <0>;
+				compatible = "allwinner,sun4i-a10-mod0-clk";
+				clocks = <&osc32k>, <&osc24M>;
+				clock-output-names = "ir";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		cpucfg@01f01c00 {
+			compatible = "allwinner,sun6i-a31-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		ir: ir@01f02000 {
+			compatible = "allwinner,sun5i-a13-ir";
+			clocks = <&apb0_gates 1>, <&ir_clk>;
+			clock-names = "apb", "ir";
+			resets = <&apb0_rst 1>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01f02000 0x40>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun6i-a31-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>;
+			resets = <&apb0_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			ir_pins_a: ir@0 {
+				allwinner,pins = "PL4";
+				allwinner,function = "s_ir";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+	};
+};
diff --git a/src/arm/sun6i-a31s-cs908.dts b/src/arm/sun6i-a31s-cs908.dts
new file mode 100644
index 000000000000..bc3734f67cf0
--- /dev/null
+++ b/src/arm/sun6i-a31s-cs908.dts
@@ -0,0 +1,104 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "CSQ CS908 top set box";
+	compatible = "csq,cs908", "allwinner,sun6i-a31s";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	usb1_vbus_pin_csq908: usb1_vbus_pin@0 {
+		allwinner,pins = "PC27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
diff --git a/src/arm/sun6i-a31s.dtsi b/src/arm/sun6i-a31s.dtsi
new file mode 100644
index 000000000000..eaf5ec8fd459
--- /dev/null
+++ b/src/arm/sun6i-a31s.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The A31s is the same die as the A31 in a different package, this is
+ * reflected by it having different pinctrl compatible everything else is
+ * identical.
+ */
+
+#include "sun6i-a31.dtsi"
+
+&pio {
+	compatible = "allwinner,sun6i-a31s-pinctrl";
+};
diff --git a/src/arm/sun7i-a20-bananapi.dts b/src/arm/sun7i-a20-bananapi.dts
new file mode 100644
index 000000000000..5dd139e7792e
--- /dev/null
+++ b/src/arm/sun7i-a20-bananapi.dts
@@ -0,0 +1,224 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "LeMaker Banana Pi";
+	compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart3;
+		serial2 = &uart7;
+	};
+
+	soc@01c00000 {
+		spi0: spi@01c05000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins_a>;
+			status = "okay";
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
+				allwinner,pins = "PH10";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			gmac_power_pin_bananapi: gmac_power_pin@0 {
+				allwinner,pins = "PH23";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			led_pins_bananapi: led_pins@0 {
+				allwinner,pins = "PH24";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		uart3: serial@01c28c00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pins_b>;
+			status = "okay";
+		};
+
+		uart7: serial@01c29c00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart7_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_rgmii_a>;
+			phy = <&phy1>;
+			phy-mode = "rgmii";
+			phy-supply = <&reg_gmac_3v3>;
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_bananapi>;
+
+		green {
+			label = "bananapi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_bananapi>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/src/arm/sun7i-a20-bananapro.dts b/src/arm/sun7i-a20-bananapro.dts
new file mode 100644
index 000000000000..fb89fe7ed21b
--- /dev/null
+++ b/src/arm/sun7i-a20-bananapro.dts
@@ -0,0 +1,262 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LeMaker Banana Pro";
+	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_bananapro>;
+
+		blue {
+			label = "bananapro:blue:usr";
+			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "bananapro:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_bananapro>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_bananapro>;
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	gmac_power_pin_bananapro: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_bananapro: led_pins@0 {
+		allwinner,pins = "PH24", "PG2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+		allwinner,pins = "PH0";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+		allwinner,pins = "PH1";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	vmmc3_pin_bananapro: vmmc3_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/src/arm/sun7i-a20-cubieboard2.dts b/src/arm/sun7i-a20-cubieboard2.dts
new file mode 100644
index 000000000000..c4ab6edb6f15
--- /dev/null
+++ b/src/arm/sun7i-a20-cubieboard2.dts
@@ -0,0 +1,210 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Cubietech Cubieboard2";
+	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			led_pins_cubieboard2: led_pins@0 {
+				allwinner,pins = "PH20", "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubieboard2>;
+
+		blue {
+			label = "cubieboard2:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "cubieboard2:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
diff --git a/src/arm/sun7i-a20-cubietruck.dts b/src/arm/sun7i-a20-cubietruck.dts
new file mode 100644
index 000000000000..8f74a649576d
--- /dev/null
+++ b/src/arm/sun7i-a20-cubietruck.dts
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2013 Oliver Schinagl
+ *
+ * Oliver Schinagl <oliver@schinagl.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Cubietech Cubietruck";
+	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc3: mmc@01c12000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins_a>;
+			vmmc-supply = <&reg_vmmc3>;
+			bus-width = <4>;
+			non-removable;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb0_vbus-supply = <&reg_usb0_vbus>;
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc3_pins_a: mmc3@0 {
+				/* AP6210 requires pull-up */
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			vmmc3_pin_cubietruck: vmmc3_pin@0 {
+				allwinner,pins = "PH9";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+				allwinner,pins = "PH12";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			led_pins_cubietruck: led_pins@0 {
+				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			usb0_vbus_pin_a: usb0_vbus_pin@0 {
+				allwinner,pins = "PH17";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		pwm: pwm@01c20e00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+			status = "okay";
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_rgmii_a>;
+			phy = <&phy1>;
+			phy-mode = "rgmii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cubietruck>;
+
+		blue {
+			label = "cubietruck:blue:usr";
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		orange {
+			label = "cubietruck:orange:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		white {
+			label = "cubietruck:white:usr";
+			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "cubietruck:green:usr";
+			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		pinctrl-0 = <&usb0_vbus_pin_a>;
+		gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_cubietruck>;
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
diff --git a/src/arm/sun7i-a20-hummingbird.dts b/src/arm/sun7i-a20-hummingbird.dts
new file mode 100644
index 000000000000..86a944ce19f8
--- /dev/null
+++ b/src/arm/sun7i-a20-hummingbird.dts
@@ -0,0 +1,248 @@
+/*
+ * Copyright 2013 Wills Wang
+ *
+ * Wills Wang <wills.wang.open@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Merrii A20 Hummingbird";
+	compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v0>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc3: mmc@01c12000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins_a>;
+			vmmc-supply = <&reg_mmc3_vdd>;
+			bus-width = <4>;
+			non-removable;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pio: pinctrl@01c20800 {
+			ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
+				allwinner,pins = "PH15";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
+				allwinner,pins = "PH9";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
+				allwinner,pins = "PH16";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		pwm: pwm@01c20e00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm0_pins_a>;
+			status = "okay";
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		uart2: serial@01c28800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pins_a>;
+			status = "okay";
+		};
+
+		uart3: serial@01c28c00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pins_a>;
+			status = "okay";
+		};
+
+		uart4: serial@01c29000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pins_a>;
+			status = "okay";
+		};
+
+		uart5: serial@01c29400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart5_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+
+		i2c3: i2c@01c2b800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins_a>;
+			status = "okay";
+		};
+
+		spi2: spi@01c17000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_pins_b>;
+			status = "okay";
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_rgmii_a>;
+			phy = <&phy1>;
+			phy-mode = "rgmii";
+			phy-supply = <&reg_gmac_vdd>;
+			/* phy reset config */
+			snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+			snps,reset-active-low;
+			/* wait 1s after reset, otherwise fail to read phy id */
+			snps,reset-delays-us = <0 10000 1000000>;
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
+		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
+		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_mmc3_vdd: mmc3_vdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>;
+		regulator-name = "mmc3_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	};
+
+	reg_gmac_vdd: gmac_vdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>;
+		regulator-name = "gmac_vdd";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		enable-active-high;
+		gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
+	};
+};
diff --git a/src/arm/sun7i-a20-i12-tvbox.dts b/src/arm/sun7i-a20-i12-tvbox.dts
new file mode 100644
index 000000000000..06148b4d000f
--- /dev/null
+++ b/src/arm/sun7i-a20-i12-tvbox.dts
@@ -0,0 +1,238 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "I12 / Q5 / QT840A A20 tvbox";
+	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc3: mmc@01c12000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins_a>;
+			vmmc-supply = <&reg_vmmc3>;
+			bus-width = <4>;
+			non-removable;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc3_pins_a: mmc3@0 {
+				/* AP6210 / AP6330 requires pull-up */
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
+				allwinner,pins = "PH12";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
+				allwinner,pins = "PH21";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			led_pins_i12_tvbox: led_pins@0 {
+				allwinner,pins = "PH9", "PH20";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			phy-supply = <&reg_gmac_3v3>;
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_i12_tvbox>;
+
+		red {
+			label = "i12_tvbox:red:usr";
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+		};
+
+		blue {
+			label = "i12_tvbox:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_vmmc3: vmmc3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_pin_i12_tvbox>;
+		regulator-name = "vmmc3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vmmc3_io: vmmc3-io {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>;
+		regulator-name = "vmmc3-io";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* This controls VCC-PI, must be always on! */
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_i12_tvbox>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/src/arm/sun7i-a20-m3.dts b/src/arm/sun7i-a20-m3.dts
new file mode 100644
index 000000000000..5add9f243ec3
--- /dev/null
+++ b/src/arm/sun7i-a20-m3.dts
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Mele M3";
+	compatible = "mele,m3", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc2: mmc@01c11000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins_a>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			non-removable;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			led_pins_m3: led_pins@0 {
+				allwinner,pins = "PH20";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_m3>;
+
+		blue {
+			label = "m3:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun7i-a20-olinuxino-lime.dts b/src/arm/sun7i-a20-olinuxino-lime.dts
new file mode 100644
index 000000000000..12ded69d61eb
--- /dev/null
+++ b/src/arm/sun7i-a20-olinuxino-lime.dts
@@ -0,0 +1,177 @@
+/*
+ * This is based on sun4i-a10-olinuxino-lime.dts
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ * Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME";
+	compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+				allwinner,pins = "PC3";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			led_pins_olinuxinolime: led_pins@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a20-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun7i-a20-olinuxino-lime2.dts b/src/arm/sun7i-a20-olinuxino-lime2.dts
new file mode 100644
index 000000000000..260dbd3bf29d
--- /dev/null
+++ b/src/arm/sun7i-a20-olinuxino-lime2.dts
@@ -0,0 +1,232 @@
+/*
+ * Copyright 2014 - Iain Paton <ipaton0@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME2";
+	compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+				allwinner,pins = "PC3";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			led_pins_olinuxinolime: led_pins@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				acin-supply = <&reg_axp_ipsout>;
+				vin2-supply = <&reg_axp_ipsout>;
+				vin3-supply = <&reg_axp_ipsout>;
+				ldo24in-supply = <&reg_axp_ipsout>;
+				ldo3in-supply = <&reg_axp_ipsout>;
+
+				regulators {
+					vdd_rtc: ldo1 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+						regulator-always-on;
+					};
+
+					avcc: ldo2 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
+
+					vcc_csi0: ldo3 {
+						regulator-min-microvolt = <700000>;
+						regulator-max-microvolt = <3500000>;
+						regulator-always-on;
+					};
+
+					vcc_csi1: ldo4 {
+						regulator-min-microvolt = <1250000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+					};
+
+					vdd_cpu: dcdc2 {
+						regulator-min-microvolt = <700000>;
+						regulator-max-microvolt = <2275000>;
+						regulator-always-on;
+					};
+
+					vdd_int: dcdc3 {
+						regulator-min-microvolt = <700000>;
+						regulator-max-microvolt = <3500000>;
+						regulator-always-on;
+					};
+				};
+			};
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_rgmii_a>;
+			phy = <&phy1>;
+			phy-mode = "rgmii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
+
+		green {
+			label = "a20-olinuxino-lime2:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_axp_ipsout: axp_ipsout {
+		compatible = "regulator-fixed";
+		regulator-name = "axp-ipsout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
diff --git a/src/arm/sun7i-a20-olinuxino-micro.dts b/src/arm/sun7i-a20-olinuxino-micro.dts
new file mode 100644
index 000000000000..714e15ac5416
--- /dev/null
+++ b/src/arm/sun7i-a20-olinuxino-micro.dts
@@ -0,0 +1,247 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Olimex A20-Olinuxino Micro";
+	compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart6;
+		serial2 = &uart7;
+		spi0 = &spi1;
+		spi1 = &spi2;
+	};
+
+	soc@01c00000 {
+		spi1: spi@01c06000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins_a>;
+			status = "okay";
+		};
+
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		mmc3: mmc@01c12000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		spi2: spi@01c17000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_pins_a>;
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
+				allwinner,pins = "PH11";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			led_pins_olinuxino: led_pins@0 {
+				allwinner,pins = "PH2";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		lradc: lradc@01c22800 {
+			vref-supply = <&reg_vcc3v0>;
+			status = "okay";
+
+			button@191 {
+				label = "Volume Up";
+				linux,code = <KEY_VOLUMEUP>;
+				channel = <0>;
+				voltage = <191274>;
+			};
+
+			button@392 {
+				label = "Volume Down";
+				linux,code = <KEY_VOLUMEDOWN>;
+				channel = <0>;
+				voltage = <392644>;
+			};
+
+			button@601 {
+				label = "Menu";
+				linux,code = <KEY_MENU>;
+				channel = <0>;
+				voltage = <601151>;
+			};
+
+			button@795 {
+				label = "Search";
+				linux,code = <KEY_SEARCH>;
+				channel = <0>;
+				voltage = <795090>;
+			};
+
+			button@987 {
+				label = "Home";
+				linux,code = <KEY_HOMEPAGE>;
+				channel = <0>;
+				voltage = <987387>;
+			};
+
+			button@1184 {
+				label = "Esc";
+				linux,code = <KEY_ESC>;
+				channel = <0>;
+				voltage = <1184678>;
+			};
+
+			button@1398 {
+				label = "Enter";
+				linux,code = <KEY_ENTER>;
+				channel = <0>;
+				voltage = <1398804>;
+			};
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		uart6: serial@01c29800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart6_pins_a>;
+			status = "okay";
+		};
+
+		uart7: serial@01c29c00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart7_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			status = "okay";
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
+
+		green {
+			label = "a20-olinuxino-micro:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	reg_ahci_5v: ahci-5v {
+		status = "okay";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun7i-a20-pcduino3.dts b/src/arm/sun7i-a20-pcduino3.dts
new file mode 100644
index 000000000000..0a2c2aeb4687
--- /dev/null
+++ b/src/arm/sun7i-a20-pcduino3.dts
@@ -0,0 +1,212 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "LinkSprite pcDuino3";
+	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
+			bus-width = <4>;
+			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		usbphy: phy@01c13400 {
+			usb1_vbus-supply = <&reg_usb1_vbus>;
+			usb2_vbus-supply = <&reg_usb2_vbus>;
+			status = "okay";
+		};
+
+		ehci0: usb@01c14000 {
+			status = "okay";
+		};
+
+		ohci0: usb@01c14400 {
+			status = "okay";
+		};
+
+		ahci: sata@01c18000 {
+			target-supply = <&reg_ahci_5v>;
+			status = "okay";
+		};
+
+		ehci1: usb@01c1c000 {
+			status = "okay";
+		};
+
+		ohci1: usb@01c1c400 {
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			ahci_pwr_pin_a: ahci_pwr_pin@0 {
+				allwinner,pins = "PH2";
+			};
+
+			led_pins_pcduino3: led_pins@0 {
+				allwinner,pins = "PH15", "PH16";
+				allwinner,function = "gpio_out";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			key_pins_pcduino3: key_pins@0 {
+				allwinner,pins = "PH17", "PH18", "PH19";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ir0: ir@01c21800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir0_pins_a>;
+			status = "okay";
+		};
+
+		uart0: serial@01c28000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins_a>;
+			status = "okay";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+
+			axp209: pmic@34 {
+				compatible = "x-powers,axp209";
+				reg = <0x34>;
+				interrupt-parent = <&nmi_intc>;
+				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_mii_a>;
+			phy = <&phy1>;
+			phy-mode = "mii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_pcduino3>;
+
+		tx {
+			label = "pcduino3:green:tx";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rx {
+			label = "pcduino3:green:rx";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_pcduino3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button@0 {
+			label = "Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+		};
+		button@1 {
+			label = "Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Key Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		status = "okay";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		status = "okay";
+	};
+
+	reg_ahci_5v: ahci-5v {
+		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
diff --git a/src/arm/sun7i-a20.dtsi b/src/arm/sun7i-a20.dtsi
new file mode 100644
index 000000000000..3a8530b79f1c
--- /dev/null
+++ b/src/arm/sun7i-a20.dtsi
@@ -0,0 +1,1234 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	aliases {
+		ethernet0 = &gmac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
+
+		framebuffer@1 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+			status = "disabled";
+		};
+
+		framebuffer@2 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-tve0";
+			clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+				 <&ahb_gates 44>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&cpu>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz    uV */
+				1008000 1450000
+				960000  1400000
+				912000  1400000
+				864000  1300000
+				720000  1200000
+				528000  1100000
+				312000  1000000
+				144000  900000
+				>;
+			#cooling-cells = <2>;
+			cooling-min-level = <0>;
+			cooling-max-level = <7>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-pll4-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		pll8: clk@01c20040 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-pll4-clk";
+			reg = <0x01c20040 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll8";
+		};
+
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "ahb";
+		};
+
+		ahb_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-ahb-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb>;
+			clock-output-names = "ahb_usb0", "ahb_ehci0",
+				"ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
+				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+				"ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+				"ahb_nand", "ahb_sdram", "ahb_ace",
+				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+				"ahb_spi2", "ahb_spi3", "ahb_sata",
+				"ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
+				"ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
+				"ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
+				"ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
+				"ahb_de_fe1", "ahb_gmac", "ahb_mp",
+				"ahb_mali";
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb0_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-apb0-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb0>;
+			clock-output-names = "apb0_codec", "apb0_spdif",
+				"apb0_ac97", "apb0_iis0", "apb0_iis1",
+				"apb0_pio", "apb0_ir0", "apb0_ir1",
+				"apb0_iis2", "apb0_keypad";
+		};
+
+		apb1: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1";
+		};
+
+		apb1_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun7i-a20-apb1-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+				"apb1_i2c2", "apb1_i2c3", "apb1_can",
+				"apb1_scr", "apb1_ps20", "apb1_ps21",
+				"apb1_i2c4", "apb1_uart0", "apb1_uart1",
+				"apb1_uart2", "apb1_uart3", "apb1_uart4",
+				"apb1_uart5", "apb1_uart6", "apb1_uart7";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mmc3_clk: clk@01c20094 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20094 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		pata_clk: clk@01c200ac {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200ac 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "pata";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		ir1_clk: clk@01c200b4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir1";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+		        #reset-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+		};
+
+		spi3_clk: clk@01c200d4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200d4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi3";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
+			clock-output-names = "mbus";
+		};
+
+		/*
+		 * The following two are dummy clocks, placeholders used in the gmac_tx
+		 * clock. The gmac driver will choose one parent depending on the PHY
+		 * interface mode, using clk_set_rate auto-reparenting.
+		 * The actual TX clock rate is not controlled by the gmac_tx clock.
+		 */
+		mii_phy_tx_clk: clk@2 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+			clock-output-names = "mii_phy_tx";
+		};
+
+		gmac_int_tx_clk: clk@3 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			clock-output-names = "gmac_int_tx";
+		};
+
+		gmac_tx_clk: clk@01c20164 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-gmac-clk";
+			reg = <0x01c20164 0x4>;
+			clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+			clock-output-names = "gmac_tx";
+		};
+
+		/*
+		 * Dummy clock used by output clocks
+		 */
+		osc24M_32k: clk@1 {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <750>;
+			clock-mult = <1>;
+			clocks = <&osc24M>;
+			clock-output-names = "osc24M_32k";
+		};
+
+		clk_out_a: clk@01c201f0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-out-clk";
+			reg = <0x01c201f0 0x4>;
+			clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+			clock-output-names = "clk_out_a";
+		};
+
+		clk_out_b: clk@01c201f4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun7i-a20-out-clk";
+			reg = <0x01c201f4 0x4>;
+			clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+			clock-output-names = "clk_out_b";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nmi_intc: interrupt-controller@01c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@01c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 17>;
+			status = "disabled";
+		};
+
+		mdio: mdio@01c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ahb_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun7i-a20-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@01c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pll6 0>, <&ahb_gates 25>;
+			status = "disabled";
+		};
+
+		ehci1: usb@01c1c000 {
+			compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 3>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@01c1c400 {
+			compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk 7>, <&ahb_gates 4>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@01c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 23>, <&spi3_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun7i-a20-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			pwm0_pins_a: pwm0@0 {
+				allwinner,pins = "PB2";
+				allwinner,function = "pwm";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			pwm1_pins_a: pwm1@0 {
+				allwinner,pins = "PI3";
+				allwinner,function = "pwm";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PB22", "PB23";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart2_pins_a: uart2@0 {
+				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,function = "uart2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_a: uart3@0 {
+				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart3_pins_b: uart3@1 {
+				allwinner,pins = "PH0", "PH1";
+				allwinner,function = "uart3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart4_pins_a: uart4@0 {
+				allwinner,pins = "PG10", "PG11";
+				allwinner,function = "uart4";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart5_pins_a: uart5@0 {
+				allwinner,pins = "PI10", "PI11";
+				allwinner,function = "uart5";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart6_pins_a: uart6@0 {
+				allwinner,pins = "PI12", "PI13";
+				allwinner,function = "uart6";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart7_pins_a: uart7@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "uart7";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB18", "PB19";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB20", "PB21";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c3_pins_a: i2c3@0 {
+				allwinner,pins = "PI0", "PI1";
+				allwinner,function = "i2c3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			emac_pins_a: emac0@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "emac";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			clk_out_a_pins_a: clk_out_a@0 {
+				allwinner,pins = "PI12";
+				allwinner,function = "clk_out_a";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			clk_out_b_pins_a: clk_out_b@0 {
+				allwinner,pins = "PI13";
+				allwinner,function = "clk_out_b";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_pins_mii_a: gmac_mii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA9", "PA10",
+						"PA11", "PA12", "PA13", "PA14",
+						"PA15", "PA16";
+				allwinner,function = "gmac";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			gmac_pins_rgmii_a: gmac_rgmii@0 {
+				allwinner,pins = "PA0", "PA1", "PA2",
+						"PA3", "PA4", "PA5", "PA6",
+						"PA7", "PA8", "PA10",
+						"PA11", "PA12", "PA13",
+						"PA15", "PA16";
+				allwinner,function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi0_pins_a: spi0@0 {
+				allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi1_pins_a: spi1@0 {
+				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,function = "spi1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_pins_a: spi2@0 {
+				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_pins_b: spi2@1 {
+				allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+				allwinner,pins = "PH1";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc2_pins_a: mmc2@0 {
+				allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+
+			mmc3_pins_a: mmc3@0 {
+				allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+				allwinner,function = "mmc3";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir0_pins_a: ir0@0 {
+				    allwinner,pins = "PB3","PB4";
+				    allwinner,function = "ir0";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir1_pins_a: ir1@0 {
+				    allwinner,pins = "PB22","PB23";
+				    allwinner,function = "ir1";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ps20_pins_a: ps20@0 {
+				allwinner,pins = "PI20", "PI21";
+				allwinner,function = "ps2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ps21_pins_a: ps21@0 {
+				allwinner,pins = "PH12", "PH13";
+				allwinner,function = "ps2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		rtc: rtc@01c20d00 {
+			compatible = "allwinner,sun7i-a20-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@01c20e00 {
+			compatible = "allwinner,sun7i-a20-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir0: ir@01c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 6>, <&ir0_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@01c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&apb0_gates 7>, <&ir1_clk>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun7i-a20-sid";
+			reg = <0x01c23800 0x200>;
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 20>;
+			status = "disabled";
+		};
+
+		uart5: serial@01c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 21>;
+			status = "disabled";
+		};
+
+		uart6: serial@01c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 22>;
+			status = "disabled";
+		};
+
+		uart7: serial@01c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 23>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@01c2b800 {
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@01c2c000 {
+			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 15>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gmac: ethernet@01c50000 {
+			compatible = "allwinner,sun7i-a20-gmac";
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+			clock-names = "stmmaceth", "allwinner_gmac_tx";
+			snps,pbl = <2>;
+			snps,fixed-burst;
+			snps,force_sf_dma_mode;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		hstimer@01c60000 {
+			compatible = "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb_gates 28>;
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		ps20: ps2@01c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 6>;
+			status = "disabled";
+		};
+
+		ps21: ps2@01c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 7>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/sun8i-a23-ippo-q8h-v1.2.dts b/src/arm/sun8i-a23-ippo-q8h-v1.2.dts
new file mode 100644
index 000000000000..dd31c53e2ab6
--- /dev/null
+++ b/src/arm/sun8i-a23-ippo-q8h-v1.2.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate
+ * dtb file since some gpio-s surrounding the wlan/bluetooth are different,
+ * and it uses different camera sensors.
+ */
+
+#include "sun8i-a23-ippo-q8h-v5.dts"
+
+/ {
+	model = "Ippo Q8H Dual Core Tablet (v1.2)";
+	compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23";
+};
diff --git a/src/arm/sun8i-a23-ippo-q8h-v5.dts b/src/arm/sun8i-a23-ippo-q8h-v5.dts
new file mode 100644
index 000000000000..623573e46080
--- /dev/null
+++ b/src/arm/sun8i-a23-ippo-q8h-v5.dts
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Ippo Q8H Dual Core Tablet (v5)";
+	compatible = "ippo,q8h-v5", "allwinner,sun8i-a23";
+
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	soc@01c00000 {
+		mmc0: mmc@01c0f000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
+			vmmc-supply = <&reg_vcc3v0>;
+			bus-width = <4>;
+			cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+			cd-inverted;
+			status = "okay";
+		};
+
+		pinctrl@01c20800 {
+			mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
+				allwinner,pins = "PB4";
+				allwinner,function = "gpio_in";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		lradc: lradc@01c22800 {
+			vref-supply = <&reg_vcc3v0>;
+			status = "okay";
+
+			button@200 {
+				label = "Volume Up";
+				linux,code = <KEY_VOLUMEUP>;
+				channel = <0>;
+				voltage = <200000>;
+			};
+
+			button@400 {
+				label = "Volume Down";
+				linux,code = <KEY_VOLUMEDOWN>;
+				channel = <0>;
+				voltage = <400000>;
+			};
+		};
+
+		i2c0: i2c@01c2ac00 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins_a>;
+			status = "okay";
+		};
+
+		i2c1: i2c@01c2b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins_a>;
+			status = "okay";
+		};
+
+		i2c2: i2c@01c2b400 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins_a>;
+			/* pull-ups and devices require PMIC regulator */
+			status = "failed";
+		};
+
+		r_uart: serial@01f02800 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_uart_pins_a>;
+			status = "okay";
+		};
+	};
+};
diff --git a/src/arm/sun8i-a23.dtsi b/src/arm/sun8i-a23.dtsi
new file mode 100644
index 000000000000..382ebd137ee4
--- /dev/null
+++ b/src/arm/sun8i-a23.dtsi
@@ -0,0 +1,611 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll6 0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		/* dummy clock until actually implemented */
+		pll5: pll5_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+			clock-output-names = "pll5";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6", "pll6x2";
+		};
+
+		cpu: cpu_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20050 0x4>;
+
+			/*
+			 * PLL1 is listed twice here.
+			 * While it looks suspicious, it's actually documented
+			 * that way both in the datasheet and in the code from
+			 * Allwinner.
+			 */
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb1: ahb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+			clock-output-names = "ahb1";
+		};
+
+		apb1: apb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+			clock-output-names = "apb1";
+		};
+
+		ahb1_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+					"ahb1_nand", "ahb1_sdram",
+					"ahb1_hstimer", "ahb1_spi0",
+					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+					"ahb1_csi", "ahb1_be",	"ahb1_fe",
+					"ahb1_gpu", "ahb1_spinlock",
+					"ahb1_drc";
+		};
+
+		apb1_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_codec", "apb1_pio",
+					"apb1_daudio0",	"apb1_daudio1";
+		};
+
+		apb2: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+			clock-output-names = "apb2";
+		};
+
+		apb2_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb2>;
+			clock-output-names = "apb2_i2c0", "apb2_i2c1",
+					"apb2_i2c2", "apb2_uart0",
+					"apb2_uart1", "apb2_uart2",
+					"apb2_uart3", "apb2_uart4";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+			clock-output-names = "mbus";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun8i-a23-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 6>;
+			resets = <&ahb1_rst 6>;
+			#dma-cells = <1>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb1_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 8>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb1_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 9>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb1_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 10>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun8i-a23-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PH2", "PH3";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PH4", "PH5";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PE12", "PE13";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ahb1_rst: reset@01c202c0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202c0 0xc>;
+		};
+
+		apb1_rst: reset@01c202d0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d0 0x4>;
+		};
+
+		apb2_rst: reset@01c202d8 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d8 0x4>;
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 16>;
+			resets = <&apb2_rst 16>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 17>;
+			resets = <&apb2_rst 17>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 18>;
+			resets = <&apb2_rst 18>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 19>;
+			resets = <&apb2_rst 19>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 20>;
+			resets = <&apb2_rst 20>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 0>;
+			resets = <&apb2_rst 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 1>;
+			resets = <&apb2_rst 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 2>;
+			resets = <&apb2_rst 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		rtc: rtc@01f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@01f01400 {
+			compatible = "allwinner,sun8i-a23-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&osc24M>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun8i-a23-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_timer",
+						"apb0_rsb", "apb0_uart",
+						"apb0_i2c";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		r_uart: serial@01f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb0_gates 4>;
+			resets = <&apb0_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun8i-a23-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>;
+			resets = <&apb0_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			r_uart_pins_a: r_uart@0 {
+				allwinner,pins = "PL2", "PL3";
+				allwinner,function = "s_uart";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+	};
+};
diff --git a/src/arm/sun9i-a80-optimus.dts b/src/arm/sun9i-a80-optimus.dts
new file mode 100644
index 000000000000..a3fed2bdf620
--- /dev/null
+++ b/src/arm/sun9i-a80-optimus.dts
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Merrii A80 Optimus Board";
+	compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+	};
+
+	chosen {
+		bootargs = "earlyprintk console=ttyS0,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_optimus>;
+
+		/* The LED names match those found on the board */
+
+		led2 {
+			label = "optimus:led2:usr";
+			gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		/* led3 is on PM15, in R_PIO */
+
+		led4 {
+			label = "optimus:led4:usr";
+			gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_a>;
+	status = "okay";
+};
+
+&i2c3_pins_a {
+	/* Enable internal pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&pio {
+	led_pins_optimus: led-pins@0 {
+		allwinner,pins = "PH0", "PH1";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
+		allwinner,pins = "PH18";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&uart4_pins_a {
+	/* Enable internal pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
diff --git a/src/arm/sun9i-a80.dtsi b/src/arm/sun9i-a80.dtsi
new file mode 100644
index 000000000000..f0f6fb91f8c3
--- /dev/null
+++ b/src/arm/sun9i-a80.dtsi
@@ -0,0 +1,632 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton64.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x1>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0x3>;
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0x100>;
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0x101>;
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0x102>;
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a15";
+			device_type = "cpu";
+			reg = <0x103>;
+		};
+	};
+
+	memory {
+		/* 8GB max. with LPAE */
+		reg = <0 0x20000000 0x02 0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll4: clk@0600000c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-pll4-clk";
+			reg = <0x0600000c 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll12: clk@0600002c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-pll4-clk";
+			reg = <0x0600002c 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll12";
+		};
+
+		gt_clk: clk@0600005c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-gt-clk";
+			reg = <0x0600005c 0x4>;
+			clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
+			clock-output-names = "gt";
+		};
+
+		ahb0: clk@06000060 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-ahb-clk";
+			reg = <0x06000060 0x4>;
+			clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
+			clock-output-names = "ahb0";
+		};
+
+		ahb1: clk@06000064 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-ahb-clk";
+			reg = <0x06000064 0x4>;
+			clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
+			clock-output-names = "ahb1";
+		};
+
+		ahb2: clk@06000068 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-ahb-clk";
+			reg = <0x06000068 0x4>;
+			clocks = <&gt_clk>, <&pll4>, <&pll12>, <&pll12>;
+			clock-output-names = "ahb2";
+		};
+
+		apb0: clk@06000070 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-apb0-clk";
+			reg = <0x06000070 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "apb0";
+		};
+
+		apb1: clk@06000074 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-apb1-clk";
+			reg = <0x06000074 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "apb1";
+		};
+
+		cci400_clk: clk@06000078 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun9i-a80-gt-clk";
+			reg = <0x06000078 0x4>;
+			clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
+			clock-output-names = "cci400";
+		};
+
+		mmc0_clk: clk@06000410 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000410 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc0", "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@06000414 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000414 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc1", "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@06000418 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x06000418 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc2", "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mmc3_clk: clk@0600041c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-mmc-clk";
+			reg = <0x0600041c 0x4>;
+			clocks = <&osc24M>, <&pll4>;
+			clock-output-names = "mmc3", "mmc3_output",
+					     "mmc3_sample";
+		};
+
+		ahb0_gates: clk@06000580 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
+			reg = <0x06000580 0x4>;
+			clocks = <&ahb0>;
+			clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
+					<14>, <15>, <16>, <18>, <20>, <21>,
+					<22>, <23>;
+			clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
+					"ahb0_ss", "ahb0_sd", "ahb0_nand1",
+					"ahb0_nand0", "ahb0_sdram",
+					"ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
+					"ahb0_spi0","ahb0_spi1", "ahb0_spi2",
+					"ahb0_spi3";
+		};
+
+		ahb1_gates: clk@06000584 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
+			reg = <0x06000584 0x4>;
+			clocks = <&ahb1>;
+			clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
+			clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
+					"ahb1_gmac", "ahb1_msgbox",
+					"ahb1_spinlock", "ahb1_hstimer",
+					"ahb1_dma";
+		};
+
+		ahb2_gates: clk@06000588 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
+			reg = <0x06000588 0x4>;
+			clocks = <&ahb2>;
+			clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
+					<11>;
+			clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
+					"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
+					"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
+		};
+
+		apb0_gates: clk@06000590 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-apb0-gates-clk";
+			reg = <0x06000590 0x4>;
+			clocks = <&apb0>;
+			clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
+					<17>, <18>, <19>;
+			clock-output-names = "apb0_spdif", "apb0_pio",
+					"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
+					"apb0_lradc", "apb0_gpadc", "apb0_twd",
+					"apb0_cirtx";
+		};
+
+		apb1_gates: clk@06000594 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun9i-a80-apb1-gates-clk";
+			reg = <0x06000594 0x4>;
+			clocks = <&apb1>;
+			clock-indices = <0>, <1>, <2>, <3>, <4>,
+					<16>, <17>, <18>, <19>, <20>, <21>;
+			clock-output-names = "apb1_i2c0", "apb1_i2c1",
+					"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
+					"apb1_uart0", "apb1_uart1",
+					"apb1_uart2", "apb1_uart3",
+					"apb1_uart4", "apb1_uart5";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/*
+		 * map 64 bit address range down to 32 bits,
+		 * as the peripherals are all under 512MB.
+		 */
+		ranges = <0 0 0 0x20000000>;
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
+				 <&mmc0_clk 1>, <&mmc0_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
+				 <&mmc1_clk 1>, <&mmc1_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
+				 <&mmc2_clk 1>, <&mmc2_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@01c12000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
+				 <&mmc3_clk 1>, <&mmc3_clk 2>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&mmc_config_clk 3>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc_config_clk: clk@01c13000 {
+			compatible = "allwinner,sun9i-a80-mmc-config-clk";
+			reg = <0x01c13000 0x10>;
+			clocks = <&ahb0_gates 8>;
+			clock-names = "ahb";
+			resets = <&ahb0_resets 8>;
+			reset-names = "ahb";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			clock-output-names = "mmc0_config", "mmc1_config",
+					     "mmc2_config", "mmc3_config";
+		};
+
+		gic: interrupt-controller@01c41000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c41000 0x1000>,
+			      <0x01c42000 0x1000>,
+			      <0x01c44000 0x2000>,
+			      <0x01c46000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		ahb0_resets: reset@060005a0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x060005a0 0x4>;
+		};
+
+		ahb1_resets: reset@060005a4 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x060005a4 0x4>;
+		};
+
+		ahb2_resets: reset@060005a8 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x060005a8 0x4>;
+		};
+
+		apb0_resets: reset@060005b0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x060005b0 0x4>;
+		};
+
+		apb1_resets: reset@060005b4 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x060005b4 0x4>;
+		};
+
+		timer@06000c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x06000c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&osc24M>;
+		};
+
+		pio: pinctrl@06000800 {
+			compatible = "allwinner,sun9i-a80-pinctrl";
+			reg = <0x06000800 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			i2c3_pins_a: i2c3@0 {
+				allwinner,pins = "PG10", "PG11";
+				allwinner,function = "i2c3";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins: mmc0 {
+				allwinner,pins = "PF0", "PF1" ,"PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_8bit_pins: mmc2_8bit {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PH12", "PH13";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			uart4_pins_a: uart4@0 {
+				allwinner,pins = "PG12", "PG13", "PG14", "PG15";
+				allwinner,function = "uart4";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		uart0: serial@07000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 16>;
+			resets = <&apb1_resets 16>;
+			status = "disabled";
+		};
+
+		uart1: serial@07000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			resets = <&apb1_resets 17>;
+			status = "disabled";
+		};
+
+		uart2: serial@07000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 18>;
+			resets = <&apb1_resets 18>;
+			status = "disabled";
+		};
+
+		uart3: serial@07000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			resets = <&apb1_resets 19>;
+			status = "disabled";
+		};
+
+		uart4: serial@07001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 20>;
+			resets = <&apb1_resets 20>;
+			status = "disabled";
+		};
+
+		uart5: serial@07001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x07001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 21>;
+			resets = <&apb1_resets 21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@07002800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002800 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 0>;
+			resets = <&apb1_resets 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@07002c00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07002c00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 1>;
+			resets = <&apb1_resets 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@07003000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 2>;
+			resets = <&apb1_resets 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@07003400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 3>;
+			resets = <&apb1_resets 3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@07003800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x07003800 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb1_gates 4>;
+			resets = <&apb1_resets 4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_wdt: watchdog@08001000 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x08001000 0x20>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		r_uart: serial@08002800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x08002800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&osc24M>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/src/arm/sunxi-common-regulators.dtsi b/src/arm/sunxi-common-regulators.dtsi
new file mode 100644
index 000000000000..e02baa66b33c
--- /dev/null
+++ b/src/arm/sunxi-common-regulators.dtsi
@@ -0,0 +1,153 @@
+/*
+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+&pio {
+	ahci_pwr_pin_a: ahci_pwr_pin@0 {
+		allwinner,pins = "PB8";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PB9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_a: usb1_vbus_pin@0 {
+		allwinner,pins = "PH6";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb2_vbus_pin_a: usb2_vbus_pin@0 {
+		allwinner,pins = "PH3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+/ {
+	reg_ahci_5v: ahci-5v {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ahci_pwr_pin_a>;
+		regulator-name = "ahci-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_vbus_pin_a>;
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb1_vbus: usb1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_vbus_pin_a>;
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_usb2_vbus: usb2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_pin_a>;
+		regulator-name = "usb2-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	reg_vcc3v0: vcc3v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
diff --git a/src/arm/tegra114-dalmore.dts b/src/arm/tegra114-dalmore.dts
new file mode 100644
index 000000000000..8b7aa0dcdc6e
--- /dev/null
+++ b/src/arm/tegra114-dalmore.dts
@@ -0,0 +1,1287 @@
+/*
+ * This dts file supports Dalmore A04.
+ * Other board revisions are not supported
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA Tegra114 Dalmore evaluation board";
+	compatible = "nvidia,dalmore", "nvidia,tegra114";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps65913@58";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			vdd-supply = <&vdd_hdmi_reg>;
+			pll-supply = <&palmas_smps3_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		dsi@54300000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&avdd_1v2_reg>;
+
+			panel@0 {
+				compatible = "panasonic,vvx10f004b00",
+					     "simple-panel";
+				reg = <0>;
+
+				power-supply = <&avdd_lcd_reg>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+						"dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+						"dap2_fs_pa2",
+						"dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_fs_pp4",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+						"dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0",
+						"pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a19_pk7 {
+				nvidia,pins = "gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5",
+						"gmi_cs6_n_pi3",
+						"gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2",
+						"gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"kb_col4_pq4",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1",
+						"dap3_sclk_pp3";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4",
+						"gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+						"pbb5",
+						"pbb6",
+						"pbb7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1",
+						"pcc2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad11_ph3",
+						"gmi_ad13_ph5",
+						"gmi_ad8_ph0",
+						"gmi_clk_pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0",
+						"gmi_cs0_n_pj0",
+						"gmi_cs2_n_pk3",
+						"gmi_cs4_n_pk2",
+						"gmi_cs7_n_pi6",
+						"gmi_dqs_p_pj3",
+						"gmi_iordy_pi5",
+						"gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs3_n_pk4 {
+				nvidia,pins = "gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3",
+						"kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row4_pr4",
+						"kb_row6_pr6",
+						"kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5",
+						"pu6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2",
+						"usb_vbus_en1_pn5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <1>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		battery: smart-battery@b {
+			compatible = "ti,bq20z45", "sbs,sbs-battery";
+			reg = <0xb>;
+			battery-name = "battery";
+			sbs,i2c-retry-count = <2>;
+			sbs,poll-retry-count = <100>;
+			power-supplies = <&charger>;
+		};
+
+		rt5640: rt5640@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&palmas_ldo6_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c700 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		tps51632@43 {
+			compatible = "ti,tps51632";
+			reg = <0x43>;
+			regulator-name = "vdd-cpu";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		tps65090@48 {
+			compatible = "ti,tps65090";
+			reg = <0x48>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(J, 0) IRQ_TYPE_LEVEL_HIGH>;
+
+			vsys1-supply = <&vdd_ac_bat_reg>;
+			vsys2-supply = <&vdd_ac_bat_reg>;
+			vsys3-supply = <&vdd_ac_bat_reg>;
+			infet1-supply = <&vdd_ac_bat_reg>;
+			infet2-supply = <&vdd_ac_bat_reg>;
+			infet3-supply = <&tps65090_dcdc2_reg>;
+			infet4-supply = <&tps65090_dcdc2_reg>;
+			infet5-supply = <&tps65090_dcdc2_reg>;
+			infet6-supply = <&tps65090_dcdc2_reg>;
+			infet7-supply = <&tps65090_dcdc2_reg>;
+			vsys-l1-supply = <&vdd_ac_bat_reg>;
+			vsys-l2-supply = <&vdd_ac_bat_reg>;
+
+			charger: charger {
+				compatible = "ti,tps65090-charger";
+				ti,enable-low-current-chrg;
+			};
+
+			regulators {
+				tps65090_dcdc1_reg: dcdc1 {
+					regulator-name = "vdd-sys-5v0";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				tps65090_dcdc2_reg: dcdc2 {
+					regulator-name = "vdd-sys-3v3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				tps65090_dcdc3_reg: dcdc3 {
+					regulator-name = "vdd-ao";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_bl_reg: fet1 {
+					regulator-name = "vdd-lcd-bl";
+				};
+
+				fet3 {
+					regulator-name = "vdd-modem-3v3";
+				};
+
+				avdd_lcd_reg: fet4 {
+					regulator-name = "avdd-lcd";
+				};
+
+				fet5 {
+					regulator-name = "vdd-lvds";
+				};
+
+				fet6 {
+					regulator-name = "vdd-sd-slot";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				fet7 {
+					regulator-name = "vdd-com-3v3";
+				};
+
+				ldo1 {
+					regulator-name = "vdd-sby-5v0";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd-sby-3v3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		palmas: tps65913@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+				smps1-in-supply = <&tps65090_dcdc3_reg>;
+				smps3-in-supply = <&tps65090_dcdc3_reg>;
+				smps4-in-supply = <&tps65090_dcdc2_reg>;
+				smps7-in-supply = <&tps65090_dcdc2_reg>;
+				smps8-in-supply = <&tps65090_dcdc2_reg>;
+				smps9-in-supply = <&tps65090_dcdc2_reg>;
+				ldo1-in-supply = <&tps65090_dcdc2_reg>;
+				ldo2-in-supply = <&tps65090_dcdc2_reg>;
+				ldo3-in-supply = <&palmas_smps3_reg>;
+				ldo4-in-supply = <&tps65090_dcdc2_reg>;
+				ldo5-in-supply = <&vdd_ac_bat_reg>;
+				ldo6-in-supply = <&tps65090_dcdc2_reg>;
+				ldo7-in-supply = <&tps65090_dcdc2_reg>;
+				ldo8-in-supply = <&tps65090_dcdc3_reg>;
+				ldo9-in-supply = <&palmas_smps9_reg>;
+				ldoln-in-supply = <&tps65090_dcdc1_reg>;
+				ldousb-in-supply = <&tps65090_dcdc1_reg>;
+
+				regulators {
+					smps12 {
+						regulator-name = "vddio-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					palmas_smps3_reg: smps3 {
+						regulator-name = "vddio-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-core";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					palmas_smps9_reg: smps9 {
+						regulator-name = "sdhci-vdd-sd-slot";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					ldo1 {
+						regulator-name = "avdd-cam1";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo2 {
+						regulator-name = "avdd-cam2";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					avdd_1v2_reg: ldo3 {
+						regulator-name = "avdd-dsi-csi";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					palmas_ldo6_reg: ldo6 {
+						regulator-name = "vdd-sensor-2v85";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo7 {
+						regulator-name = "vdd-af-cam1";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <900000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					ldo9 {
+						regulator-name = "vddio-sdmmc-2";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "hvdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+			pinmux {
+				compatible = "ti,tps65913-pinctrl";
+				pinctrl-names = "default";
+				pinctrl-0 = <&palmas_default>;
+
+				palmas_default: pinmux {
+					pin_gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+					};
+				};
+			};
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q32dw";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	sdhci@78000400 {
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	sdhci@78000600 {
+		bus-width = <8>;
+		status = "okay";
+		non-removable;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&usb3_vbus_reg>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		home {
+			label = "Home";
+			gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume_up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_ac_bat_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_ac_bat";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		dvdd_ts_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "dvdd_ts";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		usb1_vbus_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&tps65090_dcdc1_reg>;
+		};
+
+		usb3_vbus_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&tps65090_dcdc1_reg>;
+		};
+
+		vdd_hdmi_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_hdmi_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			vin-supply = <&tps65090_dcdc1_reg>;
+		};
+
+		vdd_cam_1v8_reg: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "vdd_cam_1v8_reg";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&palmas_gpio 6 0>;
+		};
+
+		vdd_5v0_hdmi: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "VDD_5V0_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&tps65090_dcdc1_reg>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-dalmore",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "NVIDIA Tegra Dalmore";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA114_CLK_PLL_A>,
+			 <&tegra_car TEGRA114_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA114_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/src/arm/tegra114-roth.dts b/src/arm/tegra114-roth.dts
new file mode 100644
index 000000000000..38acf78d7815
--- /dev/null
+++ b/src/arm/tegra114-roth.dts
@@ -0,0 +1,1126 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA SHIELD";
+	compatible = "nvidia,roth", "nvidia,tegra114";
+
+	chosen {
+		/* SHIELD's bootloader's arguments need to be overridden */
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1";
+		/* SHIELD's bootloader will place initrd at this address */
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	aliases {
+		serial0 = &uartd;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory {
+		/* memory >= 0x79600000 is reserved for firmware usage */
+		reg = <0x80000000 0x79600000>;
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_1v2_ap>;
+
+			panel@0 {
+				compatible = "lg,lh500wx1-sd03";
+				reg = <0>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+						"dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+						"dap2_fs_pa2",
+						"dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_fs_pp4",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+						"dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0",
+						"pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5",
+						"gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs6_n_pi13 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2",
+						"gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_cd_n_pv2",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2",
+						"kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4",
+						"gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+						"pbb5",
+						"pbb6",
+						"pbb7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1",
+						"pcc2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad12_ph4",
+						"gmi_ad15_ph7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3",
+						"gmi_ad13_ph5",
+						"gmi_ad8_ph0",
+						"gmi_clk_pk1",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6",
+						"gmi_cs0_n_pj0",
+						"gmi_cs4_n_pk2",
+						"gmi_cs7_n_pi6",
+						"gmi_dqs_p_pj3",
+						"gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row4_pr4",
+						"kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	/* Usable on reworked devices only */
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		regulator@43 {
+			compatible = "ti,tps51632";
+			reg = <0x43>;
+			regulator-name = "vdd-cpu";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		palmas: pmic@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				regulators {
+					smps12 {
+						regulator-name = "vdd-ddr";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1500000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps3 {
+						regulator-name = "vdd-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-soc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll-1v05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps9 {
+						regulator-name = "vdd-2v85-emmc";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					smps10_out1 {
+						regulator-name = "vdd-fan";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps10_out2 {
+						regulator-name = "vdd-5v0-sys";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo2 {
+						regulator-name = "vdd-2v8-display";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v2_ap: ldo3 {
+						regulator-name = "avdd-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo5 {
+						regulator-name = "avdd-hdmi-pll";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo6 {
+						regulator-name = "vdd-sensor-2v8";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					vddio_sdmmc3: ldo9 {
+						regulator-name = "vddio-sdmmc3";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_3v3_sys: regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* SD card */
+	sdhci@78000400 {
+		status = "okay";
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	/* eMMC */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* External USB port (must be powered) */
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		/* Should be changed to "otg" once we have vbus_supply */
+		/* As of now, USB devices need to be powered externally */
+		dr_mode = "host";
+	};
+
+	/* SHIELD controller */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&lcd_bl_en>;
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		back {
+			label = "Back";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		lcd_bl_en: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "lcd_bl_en";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+		};
+
+		vdd_lcd: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_lcd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&vdd_1v8>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			regulator-boot-on;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v8_ts";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
+			regulator-boot-on;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_3v3_ts";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+			regulator-boot-on;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_1v8_com";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&vdd_1v8>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+			regulator-boot-on;
+		};
+
+		regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_3v3_com";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_sys>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/src/arm/tegra114-tn7.dts b/src/arm/tegra114-tn7.dts
new file mode 100644
index 000000000000..f91c2c9b2f94
--- /dev/null
+++ b/src/arm/tegra114-tn7.dts
@@ -0,0 +1,351 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra114.dtsi"
+
+/ {
+	model = "Tegra Note 7";
+	compatible = "nvidia,tn7", "nvidia,tegra114";
+
+	chosen {
+		/* TN7's bootloader's arguments need to be overridden */
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
+		/* TN7's bootloader will place initrd at this address */
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	aliases {
+		serial0 = &uartd;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory {
+		/* memory >= 0x37e00000 is reserved for firmware usage */
+		reg = <0x80000000 0x37e00000>;
+	};
+
+	host1x@50000000 {
+		dsi@54300000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_1v2_ap>;
+
+			panel@0 {
+				compatible = "lg,ld070wx3-sl01";
+				reg = <0>;
+
+				power-supply = <&vdd_lcd>;
+				backlight = <&backlight>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		palmas: pmic@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				ldoln-in-supply = <&vdd_smps10_out2>;
+
+				regulators {
+					smps123 {
+						regulator-name = "vd-cpu";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vd-soc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps6 {
+						regulator-name = "va-lcd-hv";
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps7 {
+						regulator-name = "vd-ddr";
+						regulator-min-microvolt = <1350000>;
+						regulator-max-microvolt = <1350000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps8 {
+						regulator-name = "vs-pmu-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_2v9_sys: smps9 {
+						regulator-name = "vs-sys-2v9";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out1: smps10_out1 {
+						regulator-name = "vd-smps10-out1";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_smps10_out2: smps10_out2 {
+						regulator-name = "vd-smps10-out2";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo1 {
+						regulator-name = "va-pllx";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v2_ap: ldo2 {
+						regulator-name = "va-ap-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "vd-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vd-ts-hv";
+						regulator-min-microvolt = <3200000>;
+						regulator-max-microvolt = <3200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo5 {
+						regulator-name = "va-cam2-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo6 {
+						regulator-name = "va-sns-hv";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo7 {
+						regulator-name = "va-cam1-hv";
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					ldo8 {
+						regulator-name = "va-ap-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						ti,enable-ldo8-tracking;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo9 {
+						regulator-name = "vi-sdcard";
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <2900000>;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldoln {
+						regulator-name = "va-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* eMMC */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		/* Should be changed to "otg" once we have vbus_supply */
+		/* As of now, USB devices need to be powered externally */
+		dr_mode = "host";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&lcd_bl_en>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume_up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* FIXME: output of BQ24192 */
+		vs_sys: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "VS_SYS";
+			regulator-min-microvolt = <4200000>;
+			regulator-max-microvolt = <4200000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		lcd_bl_en: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "VDD_LCD_BL";
+			regulator-min-microvolt = <16500000>;
+			regulator-max-microvolt = <16500000>;
+			gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vs_sys>;
+			regulator-boot-on;
+		};
+
+		vdd_lcd: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "VD_LCD_1V8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_1v8>;
+			regulator-boot-on;
+		};
+	};
+};
diff --git a/src/arm/tegra114.dtsi b/src/arm/tegra114.dtsi
new file mode 100644
index 000000000000..4296b5398bf5
--- /dev/null
+++ b/src/arm/tegra114.dtsi
@@ -0,0 +1,770 @@
+#include <dt-bindings/clock/tegra114-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra114-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra114";
+	interrupt-parent = <&gic>;
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra114-host1x", "simple-bus";
+		reg = <0x50000000 0x00028000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x01000000>;
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra114-gr2d", "nvidia,tegra20-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra114-gr3d", "nvidia,tegra20-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_GR3D>;
+			resets = <&tegra_car 24>;
+			reset-names = "3d";
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_DISP1>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_DISP2>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra114-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA114_CLK_HDMI>,
+				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra114-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+				 <&tegra_car TEGRA114_CLK_DSIALP>,
+				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		dsi@54400000 {
+			compatible = "nvidia,tegra114-dsi";
+			reg = <0x54400000 0x00040000>;
+			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
+				 <&tegra_car TEGRA114_CLK_DSIBLP>,
+				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+			clock-names = "dsi", "lp", "parent";
+			resets = <&tegra_car 82>;
+			reset-names = "dsi";
+			nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	gic: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x50041000 0x1000>,
+		      <0x50042000 0x1000>,
+		      <0x50044000 0x2000>,
+		      <0x50046000 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra114-timer", "nvidia,tegra20-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra114-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra114-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra114-apbdma";
+		reg = <0x6000a000 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb: ahb@6000c004 {
+		compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
+		reg = <0x6000c004 0x14c>;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64   /* Chip revision */
+		       0x70000008 0x04>; /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra114-pinmux";
+		reg = <0x70000868 0x148		/* Pad control registers */
+		       0x70003000 0x40c>;	/* Mux registers */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra114-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the comptible is
+	 * "nvidia,tegra114-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra114-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA114_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra114-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC5>;
+		clock-names = "spi";
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra114-spi";
+		reg = <0x7000de00 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA114_CLK_SBC6>;
+		clock-names = "spi";
+		resets = <&tegra_car 105>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_RTC>;
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra114-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	pmc@7000e400 {
+		compatible = "nvidia,tegra114-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra114-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA114_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@70019000 {
+		compatible = "nvidia,tegra114-mc";
+		reg = <0x70019000 0x1000>;
+		clocks = <&tegra_car TEGRA114_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+	};
+
+	ahub@70080000 {
+		compatible = "nvidia,tegra114-ahub";
+		reg = <0x70080000 0x200>,
+		      <0x70080200 0x100>,
+		      <0x70081000 0x200>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA114_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>,  /* spdif */
+			 <&tegra_car 153>, /* amx */
+			 <&tegra_car 154>; /* adx */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif", "amx", "adx";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>,
+		       <&apbdma 6>, <&apbdma 6>,
+		       <&apbdma 7>, <&apbdma 7>,
+		       <&apbdma 12>, <&apbdma 12>,
+		       <&apbdma 13>, <&apbdma 13>,
+		       <&apbdma 14>, <&apbdma 14>,
+		       <&apbdma 29>, <&apbdma 29>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+			    "rx9", "tx9";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		tegra_i2s0: i2s@70080300 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080300 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70080400 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080400 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70080500 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080500 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70080600 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080600 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70080700 {
+			compatible = "nvidia,tegra114-i2s", "nvidia,tegra30-i2s";
+			reg = <0x70080700 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA114_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	mipi: mipi@700e3000 {
+		compatible = "nvidia,tegra114-mipi";
+		reg = <0x700e3000 0x100>;
+		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+		#nvidia,mipi-calibrate-cells = <1>;
+	};
+
+	sdhci@78000000 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000200 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000400 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000600 {
+		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USBD>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA114_CLK_USB3>,
+			 <&tegra_car TEGRA114_CLK_PLL_U>,
+			 <&tegra_car TEGRA114_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts =
+			<GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/src/arm/tegra124-jetson-tk1.dts b/src/arm/tegra124-jetson-tk1.dts
new file mode 100644
index 000000000000..dbfaba09703a
--- /dev/null
+++ b/src/arm/tegra124-jetson-tk1.dts
@@ -0,0 +1,1996 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Tegra124 Jetson TK1";
+	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@0,7000d000/pmic@40";
+		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uartd;
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	pcie-controller@0,01003000 {
+		status = "okay";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-supply = <&vdd_3v3_lp0>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+		vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@0,50000000 {
+		hdmi@0,54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			vdd-supply = <&vdd_3v3_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux: pinmux@0,70000868 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&state_boot>;
+
+		state_boot: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_sclk_pa3 {
+				nvidia,pins = "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pb1 {
+				nvidia,pins = "pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat3_pb4 {
+				nvidia,pins = "sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat2_pb5 {
+				nvidia,pins = "sdmmc3_dat2_pb5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat1_pb6 {
+				nvidia,pins = "sdmmc3_dat1_pb6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins = "sdmmc3_dat0_pb7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pc7 {
+				nvidia,pins = "pc7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg0 {
+				nvidia,pins = "pg0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg1 {
+				nvidia,pins = "pg1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg2 {
+				nvidia,pins = "pg2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg3 {
+				nvidia,pins = "pg3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg5 {
+				nvidia,pins = "pg5";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg6 {
+				nvidia,pins = "pg6";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph2 {
+				nvidia,pins = "ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph3 {
+				nvidia,pins = "ph3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph4 {
+				nvidia,pins = "ph4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph5 {
+				nvidia,pins = "ph5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph6 {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi0 {
+				nvidia,pins = "pi0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi1 {
+				nvidia,pins = "pi1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi2 {
+				nvidia,pins = "pi2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi3 {
+				nvidia,pins = "pi3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi4 {
+				nvidia,pins = "pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pi5 {
+				nvidia,pins = "pi5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi6 {
+				nvidia,pins = "pi6";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pi7 {
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj0 {
+				nvidia,pins = "pj0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pj2 {
+				nvidia,pins = "pj2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk1 {
+				nvidia,pins = "pk1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk2 {
+				nvidia,pins = "pk2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk3 {
+				nvidia,pins = "pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pk4 {
+				nvidia,pins = "pk4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pk7 {
+				nvidia,pins = "pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_sclk_pn3 {
+				nvidia,pins = "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en1_pn5 {
+				nvidia,pins = "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data0_po1 {
+				nvidia,pins = "ulpi_data0_po1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data1_po2 {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data2_po3 {
+				nvidia,pins = "ulpi_data2_po3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data4_po5 {
+				nvidia,pins = "ulpi_data4_po5";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data5_po6 {
+				nvidia,pins = "ulpi_data5_po6";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data6_po7 {
+				nvidia,pins = "ulpi_data6_po7";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_dout_pp2 {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_sclk_pp7 {
+				nvidia,pins = "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col1_pq1 {
+				nvidia,pins = "kb_col1_pq1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col7_pq7 {
+				nvidia,pins = "kb_col7_pq7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row1_pr1 {
+				nvidia,pins = "kb_row1_pr1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row2_pr2 {
+				nvidia,pins = "kb_row2_pr2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "sys";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row4_pr4 {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row5_pr5 {
+				nvidia,pins = "kb_row5_pr5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "displaya_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row12_ps4 {
+				nvidia,pins = "kb_row12_ps4";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row14_ps6 {
+				nvidia,pins = "kb_row14_ps6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row16_pt0 {
+				nvidia,pins = "kb_row16_pt0";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row17_pt1 {
+				nvidia,pins = "kb_row17_pt1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu1 {
+				nvidia,pins = "pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu6 {
+				nvidia,pins = "pu6";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cd_n_pv2 {
+				nvidia,pins = "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_sda_pv5 {
+				nvidia,pins = "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins = "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rxd_pw7 {
+				nvidia,pins = "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_clk_px2 {
+				nvidia,pins = "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x5_aud_px5 {
+				nvidia,pins = "gpio_x5_aud_px5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat2_py5 {
+				nvidia,pins = "sdmmc1_dat2_py5";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat1_py6 {
+				nvidia,pins = "sdmmc1_dat1_py6";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_dat0_py7 {
+				nvidia,pins = "sdmmc1_dat0_py7";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pwr_i2c_sda_pz7 {
+				nvidia,pins = "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins = "sdmmc4_dat0_paa0";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat1_paa1 {
+				nvidia,pins = "sdmmc4_dat1_paa1";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat2_paa2 {
+				nvidia,pins = "sdmmc4_dat2_paa2";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat3_paa3 {
+				nvidia,pins = "sdmmc4_dat3_paa3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat4_paa4 {
+				nvidia,pins = "sdmmc4_dat4_paa4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat5_paa5 {
+				nvidia,pins = "sdmmc4_dat5_paa5";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat6_paa6 {
+				nvidia,pins = "sdmmc4_dat6_paa6";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_dat7_paa7 {
+				nvidia,pins = "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0";
+				nvidia,function = "vimclk2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_sda_pbb2 {
+				nvidia,pins = "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pcc2 {
+				nvidia,pins = "pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_rst_n_pdd1 {
+				nvidia,pins = "pex_l0_rst_n_pdd1";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l0_clkreq_n_pdd2 {
+				nvidia,pins = "pex_l0_clkreq_n_pdd2";
+				nvidia,function = "pe0";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3";
+				nvidia,function = "pe";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l1_rst_n_pdd5 {
+				nvidia,pins = "pex_l1_rst_n_pdd5";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_clkreq_n_pdd6 {
+				nvidia,pins = "pex_l1_clkreq_n_pdd6";
+				nvidia,function = "pe1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap_mclk1_req_pee2 {
+				nvidia,pins = "dap_mclk1_req_pee2";
+				nvidia,function = "sata";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_out_pee4 {
+				nvidia,pins = "sdmmc3_clk_lb_out_pee4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_lb_in_pee5 {
+				nvidia,pins = "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dp_hpd_pff0 {
+				nvidia,pins = "dp_hpd_pff0";
+				nvidia,function = "dp";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en2_pff1 {
+				nvidia,pins = "usb_vbus_en2_pff1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			pff2 {
+				nvidia,pins = "pff2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	/* DB9 serial port */
+	serial@0,70006300 {
+		status = "okay";
+	};
+
+	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
+	i2c@0,7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		rt5639: audio-codec@1c {
+			compatible = "realtek,rt5639";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		eeprom@56 {
+			compatible = "atmel,24c02";
+			reg = <0x56>;
+			pagesize = <8>;
+		};
+	};
+
+	/* Expansion GEN2_I2C_* */
+	i2c@0,7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion CAM_I2C_* */
+	i2c@0,7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* HDMI DDC */
+	hdmi_ddc: i2c@0,7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	/* Expansion PWR_I2C_*, on-board components */
+	i2c@0,7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1_2_4_7 {
+					pins = "gpio1", "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_5_6 {
+					pins = "gpio3", "gpio5", "gpio6";
+					bias-high-impedance;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <2500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				avdd_1v05_run: ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.05V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				ldo4 {
+					regulator-name = "+2.8V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+3.3V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	/* Expansion TS_SPI_* */
+	spi@0,7000d400 {
+		status = "okay";
+	};
+
+	/* Internal SPI */
+	spi@0,7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q32dw";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@0,7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+
+		i2c-thermtrip {
+			nvidia,i2c-controller-id = <4>;
+			nvidia,bus-addr = <0x40>;
+			nvidia,reg-addr = <0x36>;
+			nvidia,reg-data = <0x2>;
+		};
+	};
+
+	/* Serial ATA */
+	sata@0,70020000 {
+		status = "okay";
+
+		hvdd-supply = <&vdd_3v3_lp0>;
+		vddio-supply = <&vdd_1v05_run>;
+		avdd-supply = <&vdd_1v05_run>;
+
+		target-5v-supply = <&vdd_5v0_sata>;
+		target-12v-supply = <&vdd_12v0_sata>;
+	};
+
+	padctl@0,7009f000 {
+		pinctrl-0 = <&padctl_default>;
+		pinctrl-names = "default";
+
+		padctl_default: pinmux {
+			usb3 {
+				nvidia,lanes = "pcie-0", "pcie-1";
+				nvidia,function = "usb3";
+				nvidia,iddq = <0>;
+			};
+
+			pcie {
+				nvidia,lanes = "pcie-2", "pcie-3",
+					       "pcie-4";
+				nvidia,function = "pcie";
+				nvidia,iddq = <0>;
+			};
+
+			sata {
+				nvidia,lanes = "sata-0";
+				nvidia,function = "sata";
+				nvidia,iddq = <0>;
+			};
+		};
+	};
+
+	/* SD card */
+	sdhci@0,700b0400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	/* eMMC */
+	sdhci@0,700b0600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	ahub@0,70300000 {
+		i2s@0,70301100 {
+			status = "okay";
+		};
+	};
+
+	/* mini-PCIe USB */
+	usb@0,7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d004000 {
+		status = "okay";
+	};
+
+	/* USB A connector */
+	usb@0,7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_mux: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_sys: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_sys: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "+3.3V_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_run: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_3v3_hdmi: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_usb1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "+USB0_VBUS_SW";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb3_vbus: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+5V_USB_HS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_3v3_lp0: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "+3.3V_LP0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_hdmi_pll: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+
+		vdd_5v0_hdmi: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "+5V_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		/* Molex power connector */
+		vdd_5v0_sata: regulator@13 {
+			compatible = "regulator-fixed";
+			reg = <13>;
+			regulator-name = "+5V_SATA";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_12v0_sata: regulator@14 {
+			compatible = "regulator-fixed";
+			reg = <14>;
+			regulator-name = "+12V_SATA";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_mux>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-jetson-tk1",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "NVIDIA Tegra Jetson TK1";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5639>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		cpu {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/* There are currently no cooling maps because there are no cooling devices */
+			};
+		};
+
+		mem {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/* There are currently no cooling maps because there are no cooling devices */
+			};
+		};
+
+		gpu {
+			trips {
+				trip@0 {
+					temperature = <101000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/* There are currently no cooling maps because there are no cooling devices */
+			};
+		};
+	};
+};
diff --git a/src/arm/tegra124-nyan-big.dts b/src/arm/tegra124-nyan-big.dts
new file mode 100644
index 000000000000..004e8e4e1c04
--- /dev/null
+++ b/src/arm/tegra124-nyan-big.dts
@@ -0,0 +1,1139 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+	model = "Acer Chromebook 13 CB5-311";
+	compatible = "google,nyan-big", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@0,7000d000/pmic@40";
+		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	host1x@0,50000000 {
+		hdmi@0,54280000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		sor@0,54540000 {
+			status = "okay";
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux@0,545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+		};
+	};
+
+	pinmux@0,70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinmux_default>;
+
+		pinmux_default: common {
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+					      "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4",
+					      "pg5",
+					      "pg6",
+					      "pi3";
+				nvidia,function = "spi4";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0",
+					      "kb_row15_ps7",
+					      "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "kb_col4_pq4",
+					      "sdmmc3_clk_lb_out_pee4",
+					      "sdmmc3_clk_lb_in_pee5",
+					      "sdmmc3_cd_n_pv2";
+				nvidia,function = "sdmmc3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5",
+					      "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4",
+					      "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <22>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <1>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,drive-type = <1>;
+			};
+			codec_irq_l {
+				nvidia,pins = "ph4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_bl_en {
+				nvidia,pins = "ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch_irq_l {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tpm_davint_l {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_irq_l {
+				nvidia,pins = "pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_reset_l {
+				nvidia,pins = "pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ts_shdn_l {
+				nvidia,pins = "pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_ap {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lid_open {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			en_vdd_sd {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ac_ok {
+				nvidia,pins = "pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sensor_irq_l {
+				nvidia,pins = "pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			wifi_en {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			en_vdd_bl {
+				nvidia,pins = "dap3_dout_pp2";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			en_vdd_hdmi {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			soc_warm_reset_l {
+				nvidia,pins = "pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hp_det_l {
+				nvidia,pins = "pi7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			mic_det_l {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@0,70006000 {
+		/* Debug connector on the bottom of the board near SD card. */
+		status = "okay";
+	};
+
+	pwm@0,7000a000 {
+		status = "okay";
+	};
+
+	i2c@0,7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		acodec: audio-codec@10 {
+			compatible = "maxim,max98090";
+			reg = <0x10>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		temperature-sensor@4c {
+			compatible = "ti,tmp451";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	i2c@0,7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@0,7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		tpm@20 {
+			compatible = "infineon,slb9645tt";
+			reg = <0x20>;
+		};
+	};
+
+	hdmi_ddc: i2c@0,7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@0,7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1 {
+					pins = "gpio1";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio2_4_7 {
+					pins = "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_6 {
+					pins = "gpio3", "gpio6";
+					bias-high-impedance;
+				};
+
+				gpio5 {
+					pins = "gpio5";
+					function = "clk32k-out";
+					bias-pull-down;
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <4000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.00V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				vdd_run_cam: ldo4 {
+					regulator-name = "+3.3V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.8V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	spi@0,7000d400 {
+		status = "okay";
+
+		cros_ec: cros-ec@0 {
+			compatible = "google,cros-ec-spi";
+			spi-max-frequency = <3000000>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+
+			google,cros-ec-spi-msg-delay = <2000>;
+
+			i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				charger: bq24735@9 {
+					compatible = "ti,bq24735";
+					reg = <0x9>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+					ti,ac-detect-gpios = <&gpio
+							TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+				};
+
+				battery: sbs-battery@b {
+					compatible = "sbs,sbs-battery";
+					reg = <0xb>;
+					sbs,i2c-retry-count = <2>;
+					sbs,poll-retry-count = <10>;
+					power-supplies = <&charger>;
+				};
+			};
+		};
+	};
+
+	spi@0,7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+
+		flash@0 {
+			compatible = "winbond,w25q32dw";
+			reg = <0>;
+		};
+	};
+
+	pmc@0,7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <0>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	hda@0,70030000 {
+		status = "okay";
+	};
+
+	sdhci@0,700b0000 { /* WiFi/BT on this bus */
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		no-1-8-v;
+		non-removable;
+	};
+
+	sdhci@0,700b0400 { /* SD Card on this bus */
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+		bus-width = <4>;
+		no-1-8-v;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	sdhci@0,700b0600 { /* eMMC on this bus */
+		status = "okay";
+		bus-width = <8>;
+		no-1-8-v;
+		non-removable;
+	};
+
+	ahub@0,70300000 {
+		i2s@0,70301100 {
+			status = "okay";
+		};
+	};
+
+	usb@0,7d000000 { /* Rear external USB port. */
+		status = "okay";
+	};
+
+	usb-phy@0,7d000000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb1_vbus>;
+	};
+
+	usb@0,7d004000 { /* Internal webcam. */
+		status = "okay";
+	};
+
+	usb-phy@0,7d004000 {
+		status = "okay";
+		vbus-supply = <&vdd_run_cam>;
+	};
+
+	usb@0,7d008000 { /* Left external USB port. */
+		status = "okay";
+	};
+
+	usb-phy@0,7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		default-brightness-level = <224>;
+		brightness-levels =
+			<  0   1   2   3   4   5   6   7
+			   8   9  10  11  12  13  14  15
+			  16  17  18  19  20  21  22  23
+			  24  25  26  27  28  29  30  31
+			  32  33  34  35  36  37  38  39
+			  40  41  42  43  44  45  46  47
+			  48  49  50  51  52  53  54  55
+			  56  57  58  59  60  61  62  63
+			  64  65  66  67  68  69  70  71
+			  72  73  74  75  76  77  78  79
+			  80  81  82  83  84  85  86  87
+			  88  89  90  91  92  93  94  95
+			  96  97  98  99 100 101 102 103
+			 104 105 106 107 108 109 110 111
+			 112 113 114 115 116 117 118 119
+			 120 121 122 123 124 125 126 127
+			 128 129 130 131 132 133 134 135
+			 136 137 138 139 140 141 142 143
+			 144 145 146 147 148 149 150 151
+			 152 153 154 155 156 157 158 159
+			 160 161 162 163 164 165 166 167
+			 168 169 170 171 172 173 174 175
+			 176 177 178 179 180 181 182 183
+			 184 185 186 187 188 189 190 191
+			 192 193 194 195 196 197 198 199
+			 200 201 202 203 204 205 206 207
+			 208 209 210 211 212 213 214 215
+			 216 217 218 219 220 221 222 223
+			 224 225 226 227 228 229 230 231
+			 232 233 234 235 236 237 238 239
+			 240 241 242 243 244 245 246 247
+			 248 249 250 251 252 253 254 255
+			 256>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;
+			linux,code = <KEY_RESERVED>;
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <30>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		compatible = "auo,b133xtn01";
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&dpaux>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_mux: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_sys: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_sys: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "+3.3V_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_run: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_3v3_hdmi: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_led: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "+VDD_LED";
+			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_5v0_ts: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "+5V_VDD_TS_SW";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "+5V_USB_HS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb3_vbus: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+5V_USB_SS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_3v3_panel: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "+3.3V_PANEL";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_3v3_lp0: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "+3.3V_LP0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			/*
+			 * TODO: find a way to wire this up with the USB EHCI
+			 * controllers so that it can be enabled on demand.
+			 */
+			regulator-always-on;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_hdmi_pll: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+
+		vdd_5v0_hdmi: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "+5V_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-nyan-big",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "Acer Chromebook 13";
+
+		nvidia,audio-routing =
+			"Headphones", "HPR",
+			"Headphones", "HPL",
+			"Speakers", "SPKR",
+			"Speakers", "SPKL",
+			"Mic Jack", "MICBIAS",
+			"DMICL", "Int Mic",
+			"DMICR", "Int Mic",
+			"IN34", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&acodec>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
+		nvidia,mic-det-gpios =
+				<&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/tegra124-venice2.dts b/src/arm/tegra124-venice2.dts
new file mode 100644
index 000000000000..5c3f7813360d
--- /dev/null
+++ b/src/arm/tegra124-venice2.dts
@@ -0,0 +1,1156 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+	model = "NVIDIA Tegra124 Venice2";
+	compatible = "nvidia,venice2", "nvidia,tegra124";
+
+	aliases {
+		rtc0 = "/i2c@0,7000d000/pmic@40";
+		rtc1 = "/rtc@0,7000e000";
+		serial0 = &uarta;
+	};
+
+	memory {
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	host1x@0,50000000 {
+		hdmi@0,54280000 {
+			status = "okay";
+
+			vdd-supply = <&vdd_3v3_hdmi>;
+			pll-supply = <&vdd_hdmi_pll>;
+			hdmi-supply = <&vdd_5v0_hdmi>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		sor@0,54540000 {
+			status = "okay";
+
+			nvidia,dpaux = <&dpaux>;
+			nvidia,panel = <&panel>;
+		};
+
+		dpaux@0,545c0000 {
+			vdd-supply = <&vdd_3v3_panel>;
+			status = "okay";
+		};
+	};
+
+	pinmux: pinmux@0,70000868 {
+		pinctrl-names = "boot";
+		pinctrl-0 = <&pinmux_boot>;
+
+		pinmux_boot: common {
+			dap_mclk1_pw4 {
+				nvidia,pins = "dap_mclk1_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+					      "dap1_fs_pn0",
+					      "dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+					      "dap2_fs_pa2",
+					      "dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+					      "dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+					      "ulpi_nxt_py2",
+					      "ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1";
+				nvidia,function = "spi1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+					      "gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pg4 {
+				nvidia,pins = "pg4",
+					      "pg5",
+					      "pg6",
+					      "pi3";
+				nvidia,function = "spi4";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pg7 {
+				nvidia,pins = "pg7";
+				nvidia,function = "spi4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ph1 {
+				nvidia,pins = "ph1";
+				nvidia,function = "pwm1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pk0 {
+				nvidia,pins = "pk0",
+					      "kb_row15_ps7",
+					      "clk_32k_out_pa0";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+					      "sdmmc1_dat0_py7",
+					      "sdmmc1_dat1_py6",
+					      "sdmmc1_dat2_py5",
+					      "sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+					      "sdmmc3_dat0_pb7",
+					      "sdmmc3_dat1_pb6",
+					      "sdmmc3_dat2_pb5",
+					      "sdmmc3_dat3_pb4",
+					      "sdmmc3_clk_lb_out_pee4",
+					      "sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+					      "sdmmc4_dat0_paa0",
+					      "sdmmc4_dat1_paa1",
+					      "sdmmc4_dat2_paa2",
+					      "sdmmc4_dat3_paa3",
+					      "sdmmc4_dat4_paa4",
+					      "sdmmc4_dat5_paa5",
+					      "sdmmc4_dat6_paa6",
+					      "sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck {
+				nvidia,pins = "jtag_rtck";
+				nvidia,function = "rtck";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk_32k_in {
+				nvidia,pins = "clk_32k_in";
+				nvidia,function = "clk";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5";
+				nvidia,function = "i2s3";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_dout_pp6 {
+				nvidia,pins = "dap4_dout_pp6",
+					      "dap4_fs_pp4",
+					      "dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_sda_pc5 {
+				nvidia,pins = "gen1_i2c_sda_pc5",
+					      "gen1_i2c_scl_pc4";
+				nvidia,function = "i2c1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+					      "uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+					      "uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+					      "ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			pj7 {
+				nvidia,pins = "pj7",
+					      "pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pb0 {
+				nvidia,pins = "pb0",
+					      "pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ph0 {
+				nvidia,pins = "ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6";
+				nvidia,function = "displaya_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4",
+					      "usb_vbus_en1_pn5";
+				nvidia,function = "usb";
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <32>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <20>;
+				nvidia,pull-up-strength = <36>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <1>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,drive-type = <1>;
+			};
+			als_irq_l {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			codec_irq_l {
+				nvidia,pins = "ph4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_bl_en {
+				nvidia,pins = "ph2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			touch_irq_l {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			tpm_davint_l {
+				nvidia,pins = "ph6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_irq_l {
+				nvidia,pins = "pk2";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ts_reset_l {
+				nvidia,pins = "pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ts_shdn_l {
+				nvidia,pins = "pk1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ph7 {
+				nvidia,pins = "ph7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_ap {
+				nvidia,pins = "kb_col0_pq0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lid_open {
+				nvidia,pins = "kb_row4_pr4";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			en_vdd_sd {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ac_ok {
+				nvidia,pins = "pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sensor_irq_l {
+				nvidia,pins = "pi6";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			wifi_en {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			wifi_rst_l {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hp_det_l {
+				nvidia,pins = "ulpi_data1_po2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	serial@0,70006000 {
+		status = "okay";
+	};
+
+	pwm@0,7000a000 {
+		status = "okay";
+	};
+
+	i2c@0,7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		acodec: audio-codec@10 {
+			compatible = "maxim,max98090";
+			reg = <0x10>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	i2c@0,7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		trackpad@4b {
+			compatible = "atmel,maxtouch";
+			reg = <0x4b>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+			linux,gpio-keymap = <0 0 0 BTN_LEFT>;
+		};
+	};
+
+	i2c@0,7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	hdmi_ddc: i2c@0,7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@0,7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@40 {
+			compatible = "ams,as3722";
+			reg = <0x40>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ams,system-power-controller;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&as3722_default>;
+
+			as3722_default: pinmux {
+				gpio0 {
+					pins = "gpio0";
+					function = "gpio";
+					bias-pull-down;
+				};
+
+				gpio1_2_4_7 {
+					pins = "gpio1", "gpio2", "gpio4", "gpio7";
+					function = "gpio";
+					bias-pull-up;
+				};
+
+				gpio3_6 {
+					pins = "gpio3", "gpio6";
+					bias-high-impedance;
+				};
+
+				gpio5 {
+					pins = "gpio5";
+					function = "clk32k-out";
+				};
+			};
+
+			regulators {
+				vsup-sd2-supply = <&vdd_5v0_sys>;
+				vsup-sd3-supply = <&vdd_5v0_sys>;
+				vsup-sd4-supply = <&vdd_5v0_sys>;
+				vsup-sd5-supply = <&vdd_5v0_sys>;
+				vin-ldo0-supply = <&vdd_1v35_lp0>;
+				vin-ldo1-6-supply = <&vdd_3v3_run>;
+				vin-ldo2-5-7-supply = <&vddio_1v8>;
+				vin-ldo3-4-supply = <&vdd_3v3_sys>;
+				vin-ldo9-10-supply = <&vdd_5v0_sys>;
+				vin-ldo11-supply = <&vdd_3v3_run>;
+
+				sd0 {
+					regulator-name = "+VDD_CPU_AP";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <2>;
+				};
+
+				sd1 {
+					regulator-name = "+VDD_CORE";
+					regulator-min-microvolt = <700000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-min-microamp = <2500000>;
+					regulator-max-microamp = <2500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ams,ext-control = <1>;
+				};
+
+				vdd_1v35_lp0: sd2 {
+					regulator-name = "+1.35V_LP0(sd2)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				sd3 {
+					regulator-name = "+1.35V_LP0(sd3)";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v05_run: sd4 {
+					regulator-name = "+1.05V_RUN";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				vddio_1v8: sd5 {
+					regulator-name = "+1.8V_VDDIO";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				sd6 {
+					regulator-name = "+VDD_GPU_AP";
+					regulator-min-microvolt = <650000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-min-microamp = <3500000>;
+					regulator-max-microamp = <3500000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo0 {
+					regulator-name = "+1.05V_RUN_AVDD";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,ext-control = <1>;
+				};
+
+				ldo1 {
+					regulator-name = "+1.8V_RUN_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2V_GEN_AVDD";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "+1.00V_LP0_VDD_RTC";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-boot-on;
+					regulator-always-on;
+					ams,enable-tracking;
+				};
+
+				vdd_run_cam: ldo4 {
+					regulator-name = "+3.3V_RUN_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo5 {
+					regulator-name = "+1.2V_RUN_CAM_FRONT";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				vddio_sdmmc3: ldo6 {
+					regulator-name = "+VDDIO_SDMMC3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo7 {
+					regulator-name = "+1.05V_RUN_CAM_REAR";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.8V_RUN_TOUCH";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "+2.8V_RUN_CAM_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo11 {
+					regulator-name = "+1.8V_RUN_VPP_FUSE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+			};
+		};
+	};
+
+	spi@0,7000d400 {
+		status = "okay";
+
+		cros_ec: cros-ec@0 {
+			compatible = "google,cros-ec-spi";
+			spi-max-frequency = <4000000>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+			reg = <0>;
+
+			google,cros-ec-spi-msg-delay = <2000>;
+
+			i2c-tunnel {
+				compatible = "google,cros-ec-i2c-tunnel";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				google,remote-bus = <0>;
+
+				charger: bq24735@9 {
+					compatible = "ti,bq24735";
+					reg = <0x9>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+					ti,ac-detect-gpios = <&gpio
+							TEGRA_GPIO(J, 0)
+							GPIO_ACTIVE_HIGH>;
+				};
+
+				battery: sbs-battery@b {
+					compatible = "sbs,sbs-battery";
+					reg = <0xb>;
+					sbs,i2c-retry-count = <2>;
+					sbs,poll-retry-count = <1>;
+				};
+			};
+		};
+	};
+
+	spi@0,7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q32dw";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@0,7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <500>;
+		nvidia,cpu-pwr-off-time = <300>;
+		nvidia,core-pwr-good-time = <641 3845>;
+		nvidia,core-pwr-off-time = <61036>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	hda@0,70030000 {
+		status = "okay";
+	};
+
+	sdhci@0,700b0400 {
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+		status = "okay";
+		bus-width = <4>;
+		vqmmc-supply = <&vddio_sdmmc3>;
+	};
+
+	sdhci@0,700b0600 {
+		status = "okay";
+		bus-width = <8>;
+	};
+
+	ahub@0,70300000 {
+		i2s@0,70301100 {
+			status = "okay";
+		};
+	};
+
+	usb@0,7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d000000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb1_vbus>;
+	};
+
+	usb@0,7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d004000 {
+		status = "okay";
+		vbus-supply = <&vdd_run_cam>;
+	};
+
+	usb@0,7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@0,7d008000 {
+		status = "okay";
+		vbus-supply = <&vdd_usb3_vbus>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_led>;
+		pwms = <&pwm 1 1000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		compatible = "lg,lp129qe", "simple-panel";
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&dpaux>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_mux: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+VDD_MUX";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_5v0_sys: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+5V_SYS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_sys: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "+3.3V_SYS";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_3v3_run: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "+3.3V_RUN";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_3v3_hdmi: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_led: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "+VDD_LED";
+			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_mux>;
+		};
+
+		vdd_5v0_ts: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "+5V_VDD_TS_SW";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "+5V_USB_HS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_usb3_vbus: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+5V_USB_SS";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+
+		vdd_3v3_panel: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "+3.3V_PANEL";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_run>;
+		};
+
+		vdd_3v3_lp0: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "+3.3V_LP0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			/*
+			 * TODO: find a way to wire this up with the USB EHCI
+			 * controllers so that it can be enabled on demand.
+			 */
+			regulator-always-on;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_3v3_sys>;
+		};
+
+		vdd_hdmi_pll: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			vin-supply = <&vdd_1v05_run>;
+		};
+
+		vdd_5v0_hdmi: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "+5V_HDMI_CON";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_sys>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-max98090-venice2",
+			     "nvidia,tegra-audio-max98090";
+		nvidia,model = "NVIDIA Tegra Venice2";
+
+		nvidia,audio-routing =
+			"Headphones", "HPR",
+			"Headphones", "HPL",
+			"Speakers", "SPKR",
+			"Speakers", "SPKL",
+			"Mic Jack", "MICBIAS",
+			"IN34", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&acodec>;
+
+		clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+			 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA124_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/src/arm/tegra124.dtsi b/src/arm/tegra124.dtsi
new file mode 100644
index 000000000000..4be06c6ea0c8
--- /dev/null
+++ b/src/arm/tegra124.dtsi
@@ -0,0 +1,959 @@
+#include <dt-bindings/clock/tegra124-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra124-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra124";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	pcie-controller@0,01003000 {
+		compatible = "nvidia,tegra124-pcie";
+		device_type = "pci";
+		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
+		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
+		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
+			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
+			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
+			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
+			 <&tegra_car TEGRA124_CLK_AFI>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>,
+			 <&tegra_car TEGRA124_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+			 <&tegra_car 72>,
+			 <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>;
+		phy-names = "pcie";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@0,50000000 {
+		compatible = "nvidia,tegra124-host1x", "simple-bus";
+		reg = <0x0 0x50000000 0x0 0x00034000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
+
+		dc@0,54200000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54200000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+		};
+
+		dc@0,54240000 {
+			compatible = "nvidia,tegra124-dc";
+			reg = <0x0 0x54240000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+		};
+
+		hdmi@0,54280000 {
+			compatible = "nvidia,tegra124-hdmi";
+			reg = <0x0 0x54280000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+				 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		sor@0,54540000 {
+			compatible = "nvidia,tegra124-sor";
+			reg = <0x0 0x54540000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>,
+				 <&tegra_car TEGRA124_CLK_CLK_M>;
+			clock-names = "sor", "parent", "dp", "safe";
+			resets = <&tegra_car 182>;
+			reset-names = "sor";
+			status = "disabled";
+		};
+
+		dpaux: dpaux@0,545c0000 {
+			compatible = "nvidia,tegra124-dpaux";
+			reg = <0x0 0x545c0000 0x0 0x00040000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA124_CLK_DPAUX>,
+				 <&tegra_car TEGRA124_CLK_PLL_DP>;
+			clock-names = "dpaux", "parent";
+			resets = <&tegra_car 181>;
+			reset-names = "dpaux";
+			status = "disabled";
+		};
+	};
+
+	gic: interrupt-controller@0,50041000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x50041000 0x0 0x1000>,
+		      <0x0 0x50042000 0x0 0x1000>,
+		      <0x0 0x50044000 0x0 0x2000>,
+		      <0x0 0x50046000 0x0 0x2000>;
+		interrupts = <GIC_PPI 9
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	gpu@0,57000000 {
+		compatible = "nvidia,gk20a";
+		reg = <0x0 0x57000000 0x0 0x01000000>,
+		      <0x0 0x58000000 0x0 0x01000000>;
+		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&tegra_car TEGRA124_CLK_GPU>,
+			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+		clock-names = "gpu", "pwr";
+		resets = <&tegra_car 184>;
+		reset-names = "gpu";
+		status = "disabled";
+	};
+
+	timer@0,60005000 {
+		compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer";
+		reg = <0x0 0x60005000 0x0 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
+	};
+
+	tegra_car: clock@0,60006000 {
+		compatible = "nvidia,tegra124-car";
+		reg = <0x0 0x60006000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@0,60007000 {
+		compatible = "nvidia,tegra124-flowctrl";
+		reg = <0x0 0x60007000 0x0 0x1000>;
+	};
+
+	gpio: gpio@0,6000d000 {
+		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
+		reg = <0x0 0x6000d000 0x0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	apbdma: dma@0,60020000 {
+		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
+		reg = <0x0 0x60020000 0x0 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	apbmisc@0,70000800 {
+		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
+		      <0x0 0x7000E864 0x0 0x04>;   /* Strapping options */
+	};
+
+	pinmux: pinmux@0,70000868 {
+		compatible = "nvidia,tegra124-pinmux";
+		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
+		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
+		      <0x0 0x70000820 0x0 0x008>; /* MIPI pad control */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra124-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the comptible is
+	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
+	 */
+	uarta: serial@0,70006000 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006000 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@0,70006040 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006040 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@0,70006200 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006200 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@0,70006300 {
+		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
+		reg = <0x0 0x70006300 0x0 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@0,7000a000 {
+		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
+		reg = <0x0 0x7000a000 0x0 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA124_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c@0,7000c000 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c000 0x0 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C1>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000c400 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c400 0x0 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C2>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000c500 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c500 0x0 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C3>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000c700 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000c700 0x0 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C4>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000d000 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000d000 0x0 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@0,7000d100 {
+		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
+		reg = <0x0 0x7000d100 0x0 0x100>;
+		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_I2C6>;
+		clock-names = "div-clk";
+		resets = <&tegra_car 166>;
+		reset-names = "i2c";
+		dmas = <&apbdma 30>, <&apbdma 30>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000d400 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d400 0x0 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC1>;
+		clock-names = "spi";
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000d600 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d600 0x0 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC2>;
+		clock-names = "spi";
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000d800 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000d800 0x0 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC3>;
+		clock-names = "spi";
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000da00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000da00 0x0 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC4>;
+		clock-names = "spi";
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000dc00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000dc00 0x0 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC5>;
+		clock-names = "spi";
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@0,7000de00 {
+		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
+		reg = <0x0 0x7000de00 0x0 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA124_CLK_SBC6>;
+		clock-names = "spi";
+		resets = <&tegra_car 105>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	rtc@0,7000e000 {
+		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
+		reg = <0x0 0x7000e000 0x0 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_RTC>;
+	};
+
+	pmc@0,7000e400 {
+		compatible = "nvidia,tegra124-pmc";
+		reg = <0x0 0x7000e400 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+	};
+
+	fuse@0,7000f800 {
+		compatible = "nvidia,tegra124-efuse";
+		reg = <0x0 0x7000f800 0x0 0x400>;
+		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	mc: memory-controller@0,70019000 {
+		compatible = "nvidia,tegra124-mc";
+		reg = <0x0 0x70019000 0x0 0x1000>;
+		clocks = <&tegra_car TEGRA124_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+	};
+
+	sata@0,70020000 {
+		compatible = "nvidia,tegra124-ahci";
+
+		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
+			<0x0 0x70020000 0x0 0x7000>; /* SATA */
+
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA124_CLK_SATA>,
+			<&tegra_car TEGRA124_CLK_SATA_OOB>,
+			<&tegra_car TEGRA124_CLK_CML1>,
+			<&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "sata", "sata-oob", "cml1", "pll_e";
+
+		resets = <&tegra_car 124>,
+			<&tegra_car 123>,
+			<&tegra_car 129>;
+		reset-names = "sata", "sata-oob", "sata-cold";
+
+		phys = <&padctl TEGRA_XUSB_PADCTL_SATA>;
+		phy-names = "sata-phy";
+
+		status = "disabled";
+	};
+
+	hda@0,70030000 {
+		compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
+		reg = <0x0 0x70030000 0x0 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_HDA>,
+		         <&tegra_car TEGRA124_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hdacodec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hdacodec_2x";
+		status = "disabled";
+	};
+
+	padctl: padctl@0,7009f000 {
+		compatible = "nvidia,tegra124-xusb-padctl";
+		reg = <0x0 0x7009f000 0x0 0x1000>;
+		resets = <&tegra_car 142>;
+		reset-names = "padctl";
+
+		#phy-cells = <1>;
+	};
+
+	sdhci@0,700b0000 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0000 0x0 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@0,700b0200 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0200 0x0 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@0,700b0400 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0400 0x0 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@0,700b0600 {
+		compatible = "nvidia,tegra124-sdhci";
+		reg = <0x0 0x700b0600 0x0 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	soctherm: thermal-sensor@0,700e2000 {
+		compatible = "nvidia,tegra124-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x1000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+			<&tegra_car TEGRA124_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+	};
+
+	ahub@0,70300000 {
+		compatible = "nvidia,tegra124-ahub";
+		reg = <0x0 0x70300000 0x0 0x200>,
+		      <0x0 0x70300800 0x0 0x800>,
+		      <0x0 0x70300200 0x0 0x600>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA124_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>,  /* spdif */
+			 <&tegra_car 153>, /* amx */
+			 <&tegra_car 185>, /* amx1 */
+			 <&tegra_car 154>, /* adx */
+			 <&tegra_car 180>, /* adx1 */
+			 <&tegra_car 186>, /* afc0 */
+			 <&tegra_car 187>, /* afc1 */
+			 <&tegra_car 188>, /* afc2 */
+			 <&tegra_car 189>, /* afc3 */
+			 <&tegra_car 190>, /* afc4 */
+			 <&tegra_car 191>; /* afc5 */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif", "amx", "amx1", "adx", "adx1",
+			      "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>,
+		       <&apbdma 6>, <&apbdma 6>,
+		       <&apbdma 7>, <&apbdma 7>,
+		       <&apbdma 12>, <&apbdma 12>,
+		       <&apbdma 13>, <&apbdma 13>,
+		       <&apbdma 14>, <&apbdma 14>,
+		       <&apbdma 29>, <&apbdma 29>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+			    "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+			    "rx9", "tx9";
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		tegra_i2s0: i2s@0,70301000 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301000 0x0 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@0,70301100 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301100 0x0 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@0,70301200 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301200 0x0 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@0,70301300 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301300 0x0 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@0,70301400 {
+			compatible = "nvidia,tegra124-i2s";
+			reg = <0x0 0x70301400 0x0 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA124_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	usb@0,7d000000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d000000 0x0 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@0,7d000000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d000000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USBD>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	usb@0,7d004000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d004000 0x0 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@0,7d004000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d004000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB2>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@0,7d008000 {
+		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x0 0x7d008000 0x0 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@0,7d008000 {
+		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
+		reg = <0x0 0x7d008000 0x0 0x4000>,
+		      <0x0 0x7d000000 0x0 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA124_CLK_USB3>,
+			 <&tegra_car TEGRA124_CLK_PLL_U>,
+			 <&tegra_car TEGRA124_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <0>;
+		nvidia,xcvr-lsrslew = <3>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,xcvr-hsslew = <12>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+		};
+
+		mem {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+		};
+
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+		};
+
+		pllx {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/src/arm/tegra20-colibri-512.dtsi b/src/arm/tegra20-colibri-512.dtsi
new file mode 100644
index 000000000000..8e0066ad9628
--- /dev/null
+++ b/src/arm/tegra20-colibri-512.dtsi
@@ -0,0 +1,533 @@
+#include "tegra20.dtsi"
+
+/ {
+	model = "Toradex Colibri T20 512MB";
+	compatible = "toradex,colibri_t20-512", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&i2c_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			audio_refclk {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			crt {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			displaya {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3",
+					"ld4", "ld5", "ld6", "ld7", "ld8",
+					"ld9", "ld10", "ld11", "ld12", "ld13",
+					"ld14", "ld15", "ld16", "ld17",
+					"lhs", "lpw0", "lpw2", "lsc0",
+					"lsc1", "lsck", "lsda", "lspi", "lvs";
+				nvidia,function = "displaya";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_dte {
+				nvidia,pins = "dte";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_gmi {
+				nvidia,pins = "ata", "atc", "atd", "ate",
+					"dap1", "dap2", "dap4", "gpu", "irrx",
+					"irtx", "spia", "spib", "spic";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_uac {
+				nvidia,pins = "uac";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			i2c1 {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			i2c3 {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			i2cddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			irda {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			nand {
+				nvidia,pins = "kbca", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			owc {
+				nvidia,pins = "owc";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pwm {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			sdio4 {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			spi1 {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			spi4 {
+				nvidia,pins = "slxa", "slxc", "slxd", "slxk";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			uarta {
+				nvidia,pins = "sdio1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			uartd {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_refclk {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			usb_gpio {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			vi {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,function = "vi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			vi_sc {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	ac97: ac97@70002000 {
+		status = "okay";
+		nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
+			GPIO_ACTIVE_HIGH>;
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c_ddc: i2c@7000c400 {
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_3v3_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&vdd_3v3_reg>;
+			vinldo4-supply = <&vdd_3v3_reg>;
+			vinldo678-supply = <&vdd_3v3_reg>;
+			vinldo9-supply = <&vdd_3v3_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sys_reg: regulator@0 {
+					reg = <0>;
+					regulator-compatible = "sys";
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				regulator@1 {
+					reg = <1>;
+					regulator-compatible = "sm0";
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				regulator@2 {
+					reg = <2>;
+					regulator-compatible = "sm1";
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: regulator@3 {
+					reg = <3>;
+					regulator-compatible = "sm2";
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				regulator@5 {
+					reg = <5>;
+					regulator-compatible = "ldo1";
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				regulator@6 {
+					reg = <6>;
+					regulator-compatible = "ldo2";
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				regulator@8 {
+					reg = <8>;
+					regulator-compatible = "ldo4";
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: regulator@9 {
+					reg = <9>;
+					regulator-compatible = "ldo5";
+					regulator-name = "vdd_ldo5,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				regulator@10 {
+					reg = <10>;
+					regulator-compatible = "ldo6";
+					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				hdmi_vdd_reg: regulator@11 {
+					reg = <11>;
+					regulator-compatible = "ldo7";
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: regulator@12 {
+					reg = <12>;
+					regulator-compatible = "ldo8";
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				regulator@13 {
+					reg = <13>;
+					regulator-compatible = "ldo9";
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				regulator@14 {
+					reg = <14>;
+					regulator-compatible = "ldo_rtc";
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	memory-controller@7000f400 {
+		emc-table@83250 {
+			reg = <83250>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <83250>;
+			nvidia,emc-registers =   <0x00000005 0x00000011
+				0x00000004 0x00000002 0x00000004 0x00000004
+				0x00000001 0x0000000a 0x00000002 0x00000002
+				0x00000001 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x0000025f
+				0x00000000 0x00000003 0x00000003 0x00000002
+				0x00000002 0x00000001 0x00000008 0x000000c8
+				0x00000003 0x00000005 0x00000003 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x00520006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+		emc-table@133200 {
+			reg = <133200>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <133200>;
+			nvidia,emc-registers =   <0x00000008 0x00000019
+				0x00000006 0x00000002 0x00000004 0x00000004
+				0x00000001 0x0000000a 0x00000002 0x00000002
+				0x00000002 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x0000039f
+				0x00000000 0x00000003 0x00000003 0x00000002
+				0x00000002 0x00000001 0x00000008 0x000000c8
+				0x00000003 0x00000007 0x00000003 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x00510006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+		emc-table@166500 {
+			reg = <166500>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <166500>;
+			nvidia,emc-registers =   <0x0000000a 0x00000021
+				0x00000008 0x00000003 0x00000004 0x00000004
+				0x00000002 0x0000000a 0x00000003 0x00000003
+				0x00000002 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x000004df
+				0x00000000 0x00000003 0x00000003 0x00000003
+				0x00000003 0x00000001 0x00000009 0x000000c8
+				0x00000003 0x00000009 0x00000004 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x004f0006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+		emc-table@333000 {
+			reg = <333000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <333000>;
+			nvidia,emc-registers =   <0x00000014 0x00000041
+				0x0000000f 0x00000005 0x00000004 0x00000005
+				0x00000003 0x0000000a 0x00000005 0x00000005
+				0x00000004 0x00000001 0x00000003 0x00000004
+				0x00000003 0x00000009 0x0000000c 0x000009ff
+				0x00000000 0x00000003 0x00000003 0x00000005
+				0x00000005 0x00000001 0x0000000e 0x000000c8
+				0x00000003 0x00000011 0x00000006 0x0000000c
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0x00380006
+				0x00000010 0x00000008 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	sdhci@c8000600 {
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_3v3_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "vdd_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "internal_usb";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-boot-on;
+			regulator-always-on;
+			gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
+			         "nvidia,tegra-audio-wm9712";
+		nvidia,model = "Colibri T20 AC97 Audio";
+
+		nvidia,audio-routing =
+			"Headphone", "HPOUTL",
+			"Headphone", "HPOUTR",
+			"LineIn", "LINEINL",
+			"LineIn", "LINEINR",
+			"Mic", "MIC1";
+
+		nvidia,ac97-controller = <&ac97>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/src/arm/tegra20-harmony.dts b/src/arm/tegra20-harmony.dts
new file mode 100644
index 000000000000..b926a07b9443
--- /dev/null
+++ b/src/arm/tegra20-harmony.dts
@@ -0,0 +1,777 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Harmony evaluation board";
+	compatible = "nvidia,harmony", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				pci_clk_reg: ldo0 {
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	kbc@7000e200 {
+		status = "okay";
+		nvidia,debounce-delay-ms = <2>;
+		nvidia,repeat-delay-ms = <160>;
+		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
+				MATRIX_KEY(0x00, 0x03, KEY_S)
+				MATRIX_KEY(0x00, 0x04, KEY_A)
+				MATRIX_KEY(0x00, 0x05, KEY_Z)
+				MATRIX_KEY(0x00, 0x07, KEY_FN)
+				MATRIX_KEY(0x01, 0x07, KEY_MENU)
+				MATRIX_KEY(0x02, 0x06, KEY_LEFTALT)
+				MATRIX_KEY(0x02, 0x07, KEY_RIGHTALT)
+				MATRIX_KEY(0x03, 0x00, KEY_5)
+				MATRIX_KEY(0x03, 0x01, KEY_4)
+				MATRIX_KEY(0x03, 0x02, KEY_R)
+				MATRIX_KEY(0x03, 0x03, KEY_E)
+				MATRIX_KEY(0x03, 0x04, KEY_F)
+				MATRIX_KEY(0x03, 0x05, KEY_D)
+				MATRIX_KEY(0x03, 0x06, KEY_X)
+				MATRIX_KEY(0x04, 0x00, KEY_7)
+				MATRIX_KEY(0x04, 0x01, KEY_6)
+				MATRIX_KEY(0x04, 0x02, KEY_T)
+				MATRIX_KEY(0x04, 0x03, KEY_H)
+				MATRIX_KEY(0x04, 0x04, KEY_G)
+				MATRIX_KEY(0x04, 0x05, KEY_V)
+				MATRIX_KEY(0x04, 0x06, KEY_C)
+				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
+				MATRIX_KEY(0x05, 0x00, KEY_9)
+				MATRIX_KEY(0x05, 0x01, KEY_8)
+				MATRIX_KEY(0x05, 0x02, KEY_U)
+				MATRIX_KEY(0x05, 0x03, KEY_Y)
+				MATRIX_KEY(0x05, 0x04, KEY_J)
+				MATRIX_KEY(0x05, 0x05, KEY_N)
+				MATRIX_KEY(0x05, 0x06, KEY_B)
+				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
+				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
+				MATRIX_KEY(0x06, 0x01, KEY_0)
+				MATRIX_KEY(0x06, 0x02, KEY_O)
+				MATRIX_KEY(0x06, 0x03, KEY_I)
+				MATRIX_KEY(0x06, 0x04, KEY_L)
+				MATRIX_KEY(0x06, 0x05, KEY_K)
+				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
+				MATRIX_KEY(0x06, 0x07, KEY_M)
+				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
+				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
+				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
+				MATRIX_KEY(0x07, 0x07, KEY_MENU)
+				MATRIX_KEY(0x08, 0x04, KEY_LEFTSHIFT)
+				MATRIX_KEY(0x08, 0x05, KEY_RIGHTSHIFT)
+				MATRIX_KEY(0x09, 0x05, KEY_LEFTCTRL)
+				MATRIX_KEY(0x09, 0x07, KEY_RIGHTCTRL)
+				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
+				MATRIX_KEY(0x0B, 0x01, KEY_P)
+				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
+				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
+				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
+				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
+				MATRIX_KEY(0x0C, 0x00, KEY_F10)
+				MATRIX_KEY(0x0C, 0x01, KEY_F9)
+				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
+				MATRIX_KEY(0x0C, 0x03, KEY_3)
+				MATRIX_KEY(0x0C, 0x04, KEY_2)
+				MATRIX_KEY(0x0C, 0x05, KEY_UP)
+				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
+				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
+				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
+				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
+				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
+				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
+				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
+				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
+				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
+				MATRIX_KEY(0x0E, 0x00, KEY_F11)
+				MATRIX_KEY(0x0E, 0x01, KEY_F12)
+				MATRIX_KEY(0x0E, 0x02, KEY_F8)
+				MATRIX_KEY(0x0E, 0x03, KEY_Q)
+				MATRIX_KEY(0x0E, 0x04, KEY_F4)
+				MATRIX_KEY(0x0E, 0x05, KEY_F3)
+				MATRIX_KEY(0x0E, 0x06, KEY_1)
+				MATRIX_KEY(0x0E, 0x07, KEY_F7)
+				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
+				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
+				MATRIX_KEY(0x0F, 0x02, KEY_F5)
+				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
+				MATRIX_KEY(0x0F, 0x04, KEY_F1)
+				MATRIX_KEY(0x0F, 0x05, KEY_F2)
+				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
+				MATRIX_KEY(0x0F, 0x07, KEY_F6)
+				MATRIX_KEY(0x14, 0x00, KEY_KP7)
+				MATRIX_KEY(0x15, 0x00, KEY_KP9)
+				MATRIX_KEY(0x15, 0x01, KEY_KP8)
+				MATRIX_KEY(0x15, 0x02, KEY_KP4)
+				MATRIX_KEY(0x15, 0x04, KEY_KP1)
+				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
+				MATRIX_KEY(0x16, 0x02, KEY_KP6)
+				MATRIX_KEY(0x16, 0x03, KEY_KP5)
+				MATRIX_KEY(0x16, 0x04, KEY_KP3)
+				MATRIX_KEY(0x16, 0x05, KEY_KP2)
+				MATRIX_KEY(0x16, 0x07, KEY_KP0)
+				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
+				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
+				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
+				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
+				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
+				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
+				MATRIX_KEY(0x1D, 0x04, KEY_END)
+				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSUP)
+				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
+				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSDOWN)
+				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
+				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
+				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
+				MATRIX_KEY(0x1F, 0x04, KEY_QUESTION)>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	pcie-controller@80003000 {
+		status = "okay";
+
+		avdd-pex-supply = <&pci_vdd_reg>;
+		vdd-pex-supply = <&pci_vdd_reg>;
+		avdd-pex-pll-supply = <&pci_vdd_reg>;
+		avdd-plle-supply = <&pci_vdd_reg>;
+		vddio-pex-clk-supply = <&pci_clk_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000200 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <8>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		compatible = "auo,b101aw03", "simple-panel";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		pci_vdd_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_1v05";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_pnl_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_bl_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_5v0_hdmi: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "VDDIO_HDMI";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-harmony",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Harmony";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/src/arm/tegra20-iris-512.dts b/src/arm/tegra20-iris-512.dts
new file mode 100644
index 000000000000..1dd7d7bfdfcc
--- /dev/null
+++ b/src/arm/tegra20-iris-512.dts
@@ -0,0 +1,101 @@
+/dts-v1/;
+
+#include "tegra20-colibri-512.dtsi"
+
+/ {
+	model = "Toradex Colibri T20 512MB on Iris";
+	compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
+
+	aliases {
+		serial0 = &uarta;
+		serial1 = &uartd;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	pinmux@70000014 {
+		state_default: pinmux {
+			hdint {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			i2cddc {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			sdio4 {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uarta {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			uartd {
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	i2c_ddc: i2c@7000c400 {
+		status = "okay";
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <4>;
+		vmmc-supply = <&vcc_sd_reg>;
+		vqmmc-supply = <&vcc_sd_reg>;
+	};
+
+	regulators {
+		regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_host_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		vcc_sd_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vcc_sd";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/tegra20-medcom-wide.dts b/src/arm/tegra20-medcom-wide.dts
new file mode 100644
index 000000000000..9b87526ab0b7
--- /dev/null
+++ b/src/arm/tegra20-medcom-wide.dts
@@ -0,0 +1,130 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Medcom-Wide board";
+	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+
+	aliases {
+		serial0 = &uartd;
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+	};
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	panel: panel {
+		compatible = "innolux,n156bge-l21", "simple-panel";
+
+		power-supply =  <&vdd_1v8_reg>, <&vdd_3v3_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-wm8903-medcom-wide",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design Medcom-Wide";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	regulators {
+		vcc_24v_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "vcc_24v";
+			regulator-min-microvolt = <24000000>;
+			regulator-max-microvolt = <24000000>;
+			regulator-always-on;
+		};
+
+		vdd_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "vdd_5v0";
+			vin-supply = <&vcc_24v_reg>;
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		vdd_3v3_reg: regulator@102 {
+			compatible = "regulator-fixed";
+			reg = <102>;
+			regulator-name = "vdd_3v3";
+			vin-supply = <&vcc_24v_reg>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vdd_1v8_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
+			regulator-name = "vdd_1v8";
+			vin-supply = <&vdd_3v3_reg>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/tegra20-paz00.dts b/src/arm/tegra20-paz00.dts
new file mode 100644
index 000000000000..ed7e1009326c
--- /dev/null
+++ b/src/arm/tegra20-paz00.dts
@@ -0,0 +1,598 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "Toshiba AC100 / Dynabook AZ";
+	compatible = "compal,paz00", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata", "atc", "atd", "ate",
+					"dap2", "gmb", "gmc", "gmd", "spia",
+					"spib", "spic", "spid", "spie";
+				nvidia,function = "gmi";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "pllc_out1";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gpu {
+				nvidia,pins = "gpu", "sdb", "sdd";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			kbcb {
+				nvidia,pins = "kbcb", "kbcd";
+				nvidia,function = "sdio2";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc";
+				nvidia,function = "owr";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdc {
+				nvidia,pins = "sdc";
+				nvidia,function = "twc";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spi4";
+			};
+			spdi {
+				nvidia,pins = "spdi", "spdo";
+				nvidia,function = "rsvd2";
+			};
+			spif {
+				nvidia,pins = "spif", "uac";
+				nvidia,function = "rsvd4";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "spdif";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dap2", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme",
+					"gpu", "gpu7", "gpv", "i2cp", "pta",
+					"rm", "sdio1", "slxk", "spdo", "uac",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap3", "dap4", "dtb",
+					"dtc", "dte", "slxa", "slxc", "slxd",
+					"spdi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spia", "spib", "spid",
+					"spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "irrx", "irtx", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"spic", "spig", "uaa", "uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
+					"spie", "spih", "uad", "uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhs", "lsc0", "lspi",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_lcsn {
+				nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
+					"lm0", "lm1", "lpp", "lpw0", "lpw1",
+					"lpw2", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "lvp1", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006200 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	lvds_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		alc5632: alc5632@1e {
+			compatible = "realtek,alc5632";
+			reg = <0x1e>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	nvec@7000c500 {
+		compatible = "nvidia,nvec";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <80000>;
+		request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		slave-addr = <138>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+		         <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&p5valw_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "+1.2vs_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "+1.0vs_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "+3.7vs_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "+1.1vs_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "+1.2vs_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "+3.3vs_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "+2.85vs_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					/*
+					 * Research indicates this should be
+					 * 1.8v; other boards that use this
+					 * rail for the same purpose need it
+					 * set to 1.8v. The schematic signal
+					 * name is incorrect; perhaps copied
+					 * from an incorrect NVIDIA reference.
+					 */
+					regulator-name = "+2.85vs_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "+3.3vs_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "+2.85vs_ldo9,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "+3.3vs_rtc";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <0>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <10>;
+
+		backlight-boot-off;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wifi {
+			label = "wifi-led";
+			gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "rfkill0";
+		};
+	};
+
+	panel: panel {
+		compatible = "samsung,ltn101nt05", "simple-panel";
+
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(M, 6) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		p5valw_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "+5valw";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		vdd_pnl_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "+3VS,vdd_pnl";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-alc5632-paz00",
+			"nvidia,tegra-audio-alc5632";
+
+		nvidia,model = "Compal PAZ00";
+
+		nvidia,audio-routing =
+			"Int Spk", "SPKOUT",
+			"Int Spk", "SPKOUTN",
+			"Headset Mic", "MICBIAS1",
+			"MIC1", "Headset Mic",
+			"Headset Stereophone", "HPR",
+			"Headset Stereophone", "HPL",
+			"DMICDAT", "Digital Mic";
+
+		nvidia,audio-codec = <&alc5632>;
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+		         <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+		         <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/src/arm/tegra20-plutux.dts b/src/arm/tegra20-plutux.dts
new file mode 100644
index 000000000000..a10b415bbdee
--- /dev/null
+++ b/src/arm/tegra20-plutux.dts
@@ -0,0 +1,102 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Plutux board";
+	compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-plutux",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design Plutux";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	regulators {
+		vcc_24v_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "vcc_24v";
+			regulator-min-microvolt = <24000000>;
+			regulator-max-microvolt = <24000000>;
+			regulator-always-on;
+		};
+
+		vdd_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "vdd_5v0";
+			vin-supply = <&vcc_24v_reg>;
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		vdd_3v3_reg: regulator@102 {
+			compatible = "regulator-fixed";
+			reg = <102>;
+			regulator-name = "vdd_3v3";
+			vin-supply = <&vcc_24v_reg>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vdd_1v8_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
+			regulator-name = "vdd_1v8";
+			vin-supply = <&vdd_3v3_reg>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/tegra20-seaboard.dts b/src/arm/tegra20-seaboard.dts
new file mode 100644
index 000000000000..e2fed2712249
--- /dev/null
+++ b/src/arm/tegra20-seaboard.dts
@@ -0,0 +1,924 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Seaboard";
+	compatible = "nvidia,seaboard", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1",
+					"lsck", "lsda";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lsc0",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap2",
+					"dap4", "ddc", "dtf", "gma", "gmc", "gmd",
+					"gme", "gpu", "gpu7", "i2cp", "irrx",
+					"irtx", "pta", "rm", "sdc", "sdd",
+					"slxd", "slxk", "spdi", "spdo", "uac",
+					"uad", "uca", "ucb", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "csus", "dap3",
+					"gpv", "owc", "slxc", "spib", "spid",
+					"spie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spia",
+					"spig", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dte {
+				nvidia,pins = "dte", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "spic", "uaa",
+					"uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		/* ALS and proximity sensor */
+		isl29018@44 {
+			compatible = "isil,isl29018";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gyrometer@68 {
+			compatible = "invn,mpu3050";
+			reg = <0x68>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "smart-battery-1.1";
+				reg = <0xb>;
+				ti,i2c-retry-count = <2>;
+				ti,poll-retry-count = <10>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0xc>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1125000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	kbc@7000e200 {
+		status = "okay";
+		nvidia,debounce-delay-ms = <32>;
+		nvidia,repeat-delay-ms = <160>;
+		nvidia,ghost-filter;
+		nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+		nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>;
+		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W)
+				MATRIX_KEY(0x00, 0x03, KEY_S)
+				MATRIX_KEY(0x00, 0x04, KEY_A)
+				MATRIX_KEY(0x00, 0x05, KEY_Z)
+				MATRIX_KEY(0x00, 0x07, KEY_FN)
+
+				MATRIX_KEY(0x01, 0x07, KEY_LEFTMETA)
+				MATRIX_KEY(0x02, 0x06, KEY_RIGHTALT)
+				MATRIX_KEY(0x02, 0x07, KEY_LEFTALT)
+
+				MATRIX_KEY(0x03, 0x00, KEY_5)
+				MATRIX_KEY(0x03, 0x01, KEY_4)
+				MATRIX_KEY(0x03, 0x02, KEY_R)
+				MATRIX_KEY(0x03, 0x03, KEY_E)
+				MATRIX_KEY(0x03, 0x04, KEY_F)
+				MATRIX_KEY(0x03, 0x05, KEY_D)
+				MATRIX_KEY(0x03, 0x06, KEY_X)
+
+				MATRIX_KEY(0x04, 0x00, KEY_7)
+				MATRIX_KEY(0x04, 0x01, KEY_6)
+				MATRIX_KEY(0x04, 0x02, KEY_T)
+				MATRIX_KEY(0x04, 0x03, KEY_H)
+				MATRIX_KEY(0x04, 0x04, KEY_G)
+				MATRIX_KEY(0x04, 0x05, KEY_V)
+				MATRIX_KEY(0x04, 0x06, KEY_C)
+				MATRIX_KEY(0x04, 0x07, KEY_SPACE)
+
+				MATRIX_KEY(0x05, 0x00, KEY_9)
+				MATRIX_KEY(0x05, 0x01, KEY_8)
+				MATRIX_KEY(0x05, 0x02, KEY_U)
+				MATRIX_KEY(0x05, 0x03, KEY_Y)
+				MATRIX_KEY(0x05, 0x04, KEY_J)
+				MATRIX_KEY(0x05, 0x05, KEY_N)
+				MATRIX_KEY(0x05, 0x06, KEY_B)
+				MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH)
+
+				MATRIX_KEY(0x06, 0x00, KEY_MINUS)
+				MATRIX_KEY(0x06, 0x01, KEY_0)
+				MATRIX_KEY(0x06, 0x02, KEY_O)
+				MATRIX_KEY(0x06, 0x03, KEY_I)
+				MATRIX_KEY(0x06, 0x04, KEY_L)
+				MATRIX_KEY(0x06, 0x05, KEY_K)
+				MATRIX_KEY(0x06, 0x06, KEY_COMMA)
+				MATRIX_KEY(0x06, 0x07, KEY_M)
+
+				MATRIX_KEY(0x07, 0x01, KEY_EQUAL)
+				MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE)
+				MATRIX_KEY(0x07, 0x03, KEY_ENTER)
+				MATRIX_KEY(0x07, 0x07, KEY_MENU)
+
+				MATRIX_KEY(0x08, 0x04, KEY_RIGHTSHIFT)
+				MATRIX_KEY(0x08, 0x05, KEY_LEFTSHIFT)
+
+				MATRIX_KEY(0x09, 0x05, KEY_RIGHTCTRL)
+				MATRIX_KEY(0x09, 0x07, KEY_LEFTCTRL)
+
+				MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE)
+				MATRIX_KEY(0x0B, 0x01, KEY_P)
+				MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE)
+				MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON)
+				MATRIX_KEY(0x0B, 0x04, KEY_SLASH)
+				MATRIX_KEY(0x0B, 0x05, KEY_DOT)
+
+				MATRIX_KEY(0x0C, 0x00, KEY_F10)
+				MATRIX_KEY(0x0C, 0x01, KEY_F9)
+				MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE)
+				MATRIX_KEY(0x0C, 0x03, KEY_3)
+				MATRIX_KEY(0x0C, 0x04, KEY_2)
+				MATRIX_KEY(0x0C, 0x05, KEY_UP)
+				MATRIX_KEY(0x0C, 0x06, KEY_PRINT)
+				MATRIX_KEY(0x0C, 0x07, KEY_PAUSE)
+
+				MATRIX_KEY(0x0D, 0x00, KEY_INSERT)
+				MATRIX_KEY(0x0D, 0x01, KEY_DELETE)
+				MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP )
+				MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN)
+				MATRIX_KEY(0x0D, 0x05, KEY_RIGHT)
+				MATRIX_KEY(0x0D, 0x06, KEY_DOWN)
+				MATRIX_KEY(0x0D, 0x07, KEY_LEFT)
+
+				MATRIX_KEY(0x0E, 0x00, KEY_F11)
+				MATRIX_KEY(0x0E, 0x01, KEY_F12)
+				MATRIX_KEY(0x0E, 0x02, KEY_F8)
+				MATRIX_KEY(0x0E, 0x03, KEY_Q)
+				MATRIX_KEY(0x0E, 0x04, KEY_F4)
+				MATRIX_KEY(0x0E, 0x05, KEY_F3)
+				MATRIX_KEY(0x0E, 0x06, KEY_1)
+				MATRIX_KEY(0x0E, 0x07, KEY_F7)
+
+				MATRIX_KEY(0x0F, 0x00, KEY_ESC)
+				MATRIX_KEY(0x0F, 0x01, KEY_GRAVE)
+				MATRIX_KEY(0x0F, 0x02, KEY_F5)
+				MATRIX_KEY(0x0F, 0x03, KEY_TAB)
+				MATRIX_KEY(0x0F, 0x04, KEY_F1)
+				MATRIX_KEY(0x0F, 0x05, KEY_F2)
+				MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK)
+				MATRIX_KEY(0x0F, 0x07, KEY_F6)
+
+				/* Software Handled Function Keys */
+				MATRIX_KEY(0x14, 0x00, KEY_KP7)
+
+				MATRIX_KEY(0x15, 0x00, KEY_KP9)
+				MATRIX_KEY(0x15, 0x01, KEY_KP8)
+				MATRIX_KEY(0x15, 0x02, KEY_KP4)
+				MATRIX_KEY(0x15, 0x04, KEY_KP1)
+
+				MATRIX_KEY(0x16, 0x01, KEY_KPSLASH)
+				MATRIX_KEY(0x16, 0x02, KEY_KP6)
+				MATRIX_KEY(0x16, 0x03, KEY_KP5)
+				MATRIX_KEY(0x16, 0x04, KEY_KP3)
+				MATRIX_KEY(0x16, 0x05, KEY_KP2)
+				MATRIX_KEY(0x16, 0x07, KEY_KP0)
+
+				MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK)
+				MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS)
+				MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS)
+				MATRIX_KEY(0x1B, 0x05, KEY_KPDOT)
+
+				MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP)
+
+				MATRIX_KEY(0x1D, 0x03, KEY_HOME)
+				MATRIX_KEY(0x1D, 0x04, KEY_END)
+				MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSDOWN)
+				MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN)
+				MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSUP)
+
+				MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK)
+				MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK)
+				MATRIX_KEY(0x1E, 0x02, KEY_MUTE)
+
+				MATRIX_KEY(0x1F, 0x04, KEY_HELP)>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	memory-controller@7000f400 {
+		emc-table@190000 {
+			reg = <190000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <190000>;
+			nvidia,emc-registers = <0x0000000c 0x00000026
+				0x00000009 0x00000003 0x00000004 0x00000004
+				0x00000002 0x0000000c 0x00000003 0x00000003
+				0x00000002 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x0000059f
+				0x00000000 0x00000003 0x00000003 0x00000003
+				0x00000003 0x00000001 0x0000000b 0x000000c8
+				0x00000003 0x00000007 0x00000004 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xa06204ae
+				0x007dc010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+
+		emc-table@380000 {
+			reg = <380000>;
+			compatible = "nvidia,tegra20-emc-table";
+			clock-frequency = <380000>;
+			nvidia,emc-registers = <0x00000017 0x0000004b
+				0x00000012 0x00000006 0x00000004 0x00000005
+				0x00000003 0x0000000c 0x00000006 0x00000006
+				0x00000003 0x00000001 0x00000004 0x00000005
+				0x00000004 0x00000009 0x0000000d 0x00000b5f
+				0x00000000 0x00000003 0x00000003 0x00000006
+				0x00000006 0x00000001 0x00000011 0x000000c8
+				0x00000003 0x0000000e 0x00000007 0x0000000f
+				0x00000002 0x00000000 0x00000000 0x00000002
+				0x00000000 0x00000000 0x00000083 0xe044048b
+				0x007d8010 0x00000000 0x00000000 0x00000000
+				0x00000000 0x00000000 0x00000000 0x00000000>;
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+		dr_mode = "otg";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&vbus_reg>;
+		dr_mode = "otg";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a", "simple-panel";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vbus_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_vbus_wup1";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vdd_pnl_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_bl_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-seaboard",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Seaboard";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1R", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/src/arm/tegra20-tamonten.dtsi b/src/arm/tegra20-tamonten.dtsi
new file mode 100644
index 000000000000..13d4e6185275
--- /dev/null
+++ b/src/arm/tegra20-tamonten.dtsi
@@ -0,0 +1,529 @@
+#include "tegra20.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten SOM";
+	compatible = "ad,tamonten", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
+					"spia", "spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtd";
+				nvidia,function = "sdio2";
+			};
+			dtb {
+				nvidia,pins = "dtb", "dtc", "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uarta";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
+					"cdev1", "cdev2", "dap1", "dtb", "gma",
+					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"gpv", "i2cp", "pta", "rm", "slxa",
+					"slxk", "spia", "spib", "uac";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spid", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
+					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"slxc", "slxd", "spdi", "spdo", "spig",
+					"uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dta", "dtd", "kbca",
+					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
+					"sdc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "owc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "sdd", "spic",
+					"spie", "spih", "uaa", "uab", "uad",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "pmc";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			/* vdd_5v0_reg must be provided by the base board */
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sys_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sys_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sys_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				pci_clk_reg: ldo0 {
+					regulator-name = "vdd_ldo0,vddio_pex_clk";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam";
+					/*
+					 * According to the Tegra 2 Automotive
+					 * DataSheet, a typical value for this
+					 * would be 2.8V, but the PMIC only
+					 * supports 2.85V.
+					 */
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	pcie-controller@80003000 {
+		avdd-pex-supply = <&pci_vdd_reg>;
+		vdd-pex-supply = <&pci_vdd_reg>;
+		avdd-pex-pll-supply = <&pci_vdd_reg>;
+		avdd-plle-supply = <&pci_vdd_reg>;
+		vddio-pex-clk-supply = <&pci_clk_reg>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000600 {
+		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		status = "okay";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pci_vdd_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v05";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			gpio = <&pmic 2 0>;
+			enable-active-high;
+		};
+	};
+};
diff --git a/src/arm/tegra20-tec.dts b/src/arm/tegra20-tec.dts
new file mode 100644
index 000000000000..c12d8bead2ee
--- /dev/null
+++ b/src/arm/tegra20-tec.dts
@@ -0,0 +1,111 @@
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Tamonten Evaluation Carrier";
+	compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	pcie-controller@80003000 {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-wm8903-tec",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design TEC";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	regulators {
+		vcc_24v_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "vcc_24v";
+			regulator-min-microvolt = <24000000>;
+			regulator-max-microvolt = <24000000>;
+			regulator-always-on;
+		};
+
+		vdd_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "vdd_5v0";
+			vin-supply = <&vcc_24v_reg>;
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		vdd_3v3_reg: regulator@102 {
+			compatible = "regulator-fixed";
+			reg = <102>;
+			regulator-name = "vdd_3v3";
+			vin-supply = <&vcc_24v_reg>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vdd_1v8_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
+			regulator-name = "vdd_1v8";
+			vin-supply = <&vdd_3v3_reg>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/tegra20-trimslice.dts b/src/arm/tegra20-trimslice.dts
new file mode 100644
index 000000000000..d99af4ef9c64
--- /dev/null
+++ b/src/arm/tegra20-trimslice.dts
@@ -0,0 +1,468 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "Compulab TrimSlice board";
+	compatible = "compulab,trimslice", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000c500/rtc@56";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc", "gmb";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gme", "pta";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc", "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "uarta";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
+					"ld3", "ld4", "ld5", "ld6", "ld7",
+					"ld8", "ld9", "ld10", "ld11", "ld12",
+					"ld13", "ld14", "ld15", "ld16", "ld17",
+					"ldc", "ldi", "lhp0", "lhp1", "lhp2",
+					"lhs", "lm0", "lm1", "lpp", "lpw0",
+					"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
+					"lsda", "lsdi", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd";
+				nvidia,function = "pwm";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxc {
+				nvidia,pins = "slxc", "slxd";
+				nvidia,function = "sdio3";
+			};
+			spdi {
+				nvidia,pins = "spdi", "spdo";
+				nvidia,function = "spdif";
+			};
+			spia {
+				nvidia,pins = "spia", "spib", "spic";
+				nvidia,function = "spi2";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atc", "atd", "ate",
+					"crtp", "dap2", "dap3", "dap4", "dta",
+					"dtb", "dtc", "dtd", "dte", "gmb",
+					"gme", "i2cp", "pta", "slxc", "slxd",
+					"spdi", "spdo", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_atb {
+				nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
+					"gma", "gmc", "gmd", "gpu", "gpu7",
+					"gpv", "sdio1", "slxa", "slxk", "uac";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_csus {
+				nvidia,pins = "csus", "spia", "spib",
+					"spid", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ddc {
+				nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsc1", "lsck", "lsda", "lsdi",
+					"lvp0", "pmc";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_irrx {
+				nvidia,pins = "irrx", "irtx", "kbca", "kbcb",
+					"kbcc", "kbcd", "kbce", "kbcf", "owc",
+					"spic", "spie", "spig", "spih", "uaa",
+					"uab", "uad", "uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
+					"lvs", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			conf_spif {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	dvi_ddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	spi@7000c380 {
+		status = "okay";
+		spi-max-frequency = <48000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q80bl";
+			reg = <0>;
+			spi-max-frequency = <48000000>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		codec: codec@1a {
+			compatible = "ti,tlv320aic23";
+			reg = <0x1a>;
+		};
+
+		rtc@56 {
+			compatible = "emmicro,em3027";
+			reg = <0x56>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <3875>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	pcie-controller@80003000 {
+		status = "okay";
+
+		avdd-pex-supply = <&pci_vdd_reg>;
+		vdd-pex-supply = <&pci_vdd_reg>;
+		avdd-pex-pll-supply = <&pci_vdd_reg>;
+		avdd-plle-supply = <&pci_vdd_reg>;
+		vddio-pex-clk-supply = <&pci_clk_reg>;
+
+		pci@1,0 {
+			status = "okay";
+		};
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&vbus_reg>;
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hdmi_vdd_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "avdd_hdmi";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		hdmi_pll_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "avdd_hdmi_pll";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		vbus_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pci_clk_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "pci_clk";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		pci_vdd_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "pci_vdd";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-trimslice";
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&codec>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/src/arm/tegra20-ventana.dts b/src/arm/tegra20-ventana.dts
new file mode 100644
index 000000000000..04c58e9ca490
--- /dev/null
+++ b/src/arm/tegra20-ventana.dts
@@ -0,0 +1,702 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Ventana evaluation board";
+	compatible = "nvidia,ventana", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uartd;
+	};
+
+	memory {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa", "slxk";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap2",
+					"dap4", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "i2cp", "irrx",
+					"irtx", "pta", "rm", "sdc", "sdd",
+					"slxc", "slxd", "slxk", "spdi", "spdo",
+					"uac", "uad", "uca", "ucb", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "csus", "dap3", "gmd",
+					"gpv", "owc", "spia", "spib", "spic",
+					"spid", "spie", "spig";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dte {
+				nvidia,pins = "dte", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		/* ALS and proximity sensor */
+		isl29018@44 {
+			compatible = "isil,isl29018";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: tps6586x@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_reg>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+	};
+
+	usb@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb-phy@c5004000 {
+		status = "okay";
+		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
+			GPIO_ACTIVE_LOW>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+	};
+
+	sdhci@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 2 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		compatible = "chunghwa,claa101wa01a", "simple-panel";
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vdd_1v5";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_1v2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_pnl_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_pnl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		vdd_bl_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-ventana",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Ventana";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,int-mic-en-gpios = <&gpio TEGRA_GPIO(X, 0)
+			GPIO_ACTIVE_HIGH>;
+		nvidia,ext-mic-en-gpios = <&gpio TEGRA_GPIO(X, 1)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/src/arm/tegra20-whistler.dts b/src/arm/tegra20-whistler.dts
new file mode 100644
index 000000000000..340d81108df1
--- /dev/null
+++ b/src/arm/tegra20-whistler.dts
@@ -0,0 +1,632 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20.dtsi"
+
+/ {
+	model = "NVIDIA Tegra20 Whistler evaluation board";
+	compatible = "nvidia,whistler", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/max8907@3c";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata", "atb", "ate", "gma", "gmb",
+					"gmc", "gmd", "gpu";
+				nvidia,function = "gmi";
+			};
+			atc {
+				nvidia,pins = "atc", "atd";
+				nvidia,function = "sdio4";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "osc";
+			};
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,function = "vi";
+			};
+			dte {
+				nvidia,pins = "dte";
+				nvidia,function = "rsvd1";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gme {
+				nvidia,pins = "gme";
+				nvidia,function = "dap5";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint", "pta";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			kbcb {
+				nvidia,pins = "kbcb", "kbcd";
+				nvidia,function = "sdio2";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "lsck", "lsda", "lsdi",
+					"spia", "spib", "spic";
+				nvidia,function = "spi3";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldc", "ldi",
+					"lhp0", "lhp1", "lhp2", "lhs", "lm0",
+					"lm1", "lpp", "lpw0", "lpw1", "lpw2",
+					"lsc0", "lsc1", "lspi", "lvp0", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "uac";
+				nvidia,function = "owr";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxa",
+					"slxc", "slxd", "slxk";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			spdi {
+				nvidia,pins = "spdi", "spdo";
+				nvidia,function = "rsvd2";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			spif {
+				nvidia,pins = "spif";
+				nvidia,function = "spi2";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab";
+				nvidia,function = "uarta";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			uda {
+				nvidia,pins = "uda";
+				nvidia,function = "spi1";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "ddc", "gma",
+					"gmb", "gmc", "gmd", "irrx", "irtx",
+					"kbca", "kbcb", "kbcc", "kbcd", "kbce",
+					"kbcf", "sdc", "sdd", "spie", "spig",
+					"spih", "uaa", "uab", "uad", "uca",
+					"ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_atd {
+				nvidia,pins = "atd", "ate", "cdev1", "csus",
+					"dap1", "dap2", "dap3", "dap4", "dte",
+					"dtf", "gpu", "gpu7", "gpv", "i2cp",
+					"rm", "sdio1", "slxa", "slxc", "slxd",
+					"slxk", "spdi", "spdo", "uac", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_cdev2 {
+				nvidia,pins = "cdev2", "spia", "spib";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "lc", "pmca",
+					"pmcb", "pmcc", "pmcd", "xm2c",
+					"xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd",
+					"spid", "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_gme {
+				nvidia,pins = "gme", "owc", "pta", "spic";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+			conf_ls {
+				nvidia,pins = "ls", "pmce";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			drive_dap1 {
+				nvidia,pins = "drive_dap1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_8>;
+				nvidia,pull-down-strength = <0>;
+				nvidia,pull-up-strength = <0>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+	};
+
+	i2s@70002800 {
+		status = "okay";
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		codec: codec@1a {
+			compatible = "wlf,wm8753";
+			reg = <0x1a>;
+		};
+
+		tca6416: gpio@20 {
+			compatible = "ti,tca6416";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		max8907@3c {
+			compatible = "maxim,max8907";
+			reg = <0x3c>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			maxim,system-power-controller;
+
+			mbatt-supply = <&usb0_vbus_reg>;
+			in-v1-supply = <&mbatt_reg>;
+			in-v2-supply = <&mbatt_reg>;
+			in-v3-supply = <&mbatt_reg>;
+			in1-supply = <&mbatt_reg>;
+			in2-supply = <&nvvdd_sv3_reg>;
+			in3-supply = <&mbatt_reg>;
+			in4-supply = <&mbatt_reg>;
+			in5-supply = <&mbatt_reg>;
+			in6-supply = <&mbatt_reg>;
+			in7-supply = <&mbatt_reg>;
+			in8-supply = <&mbatt_reg>;
+			in9-supply = <&mbatt_reg>;
+			in10-supply = <&mbatt_reg>;
+			in11-supply = <&mbatt_reg>;
+			in12-supply = <&mbatt_reg>;
+			in13-supply = <&mbatt_reg>;
+			in14-supply = <&mbatt_reg>;
+			in15-supply = <&mbatt_reg>;
+			in16-supply = <&mbatt_reg>;
+			in17-supply = <&nvvdd_sv3_reg>;
+			in18-supply = <&nvvdd_sv3_reg>;
+			in19-supply = <&mbatt_reg>;
+			in20-supply = <&mbatt_reg>;
+
+			regulators {
+				mbatt_reg: mbatt {
+					regulator-name = "vbat_pmu";
+					regulator-always-on;
+				};
+
+				sd1 {
+					regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				sd2 {
+					regulator-name = "nvvdd_sv2,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				nvvdd_sv3_reg: sd3 {
+					regulator-name = "nvvdd_sv3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1 {
+					regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "nvvdd_ldo2,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo3 {
+					regulator-name = "nvvdd_ldo3,vcom_1v8b";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "nvvdd_ldo4,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				hdmi_pll_reg: ldo6 {
+					regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo7 {
+					regulator-name = "nvvdd_ldo7,avddio_audio";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo8 {
+					regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+				};
+
+				ldo9 {
+					regulator-name = "nvvdd_ldo9,avdd_cam*";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo10 {
+					regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				hdmi_vdd_reg: ldo11 {
+					regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo12 {
+					regulator-name = "nvvdd_ldo12,vddio_sdio";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo13 {
+					regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo14 {
+					regulator-name = "nvvdd_ldo14,avdd_vdac";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo15 {
+					regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo16 {
+					regulator-name = "nvvdd_ldo16,vdd_dbrtr";
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+				};
+
+				ldo17 {
+					regulator-name = "nvvdd_ldo17,vddio_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo18 {
+					regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo19 {
+					regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+				};
+
+				ldo20 {
+					regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				out5v {
+					regulator-name = "usb0_vbus_reg";
+				};
+
+				out33v {
+					regulator-name = "pmu_out3v3";
+				};
+
+				bbat {
+					regulator-name = "pmu_bbat";
+					regulator-min-microvolt = <2400000>;
+					regulator-max-microvolt = <2400000>;
+					regulator-always-on;
+				};
+
+				sdby {
+					regulator-name = "vdd_aon";
+					regulator-always-on;
+				};
+
+				vrtc {
+					regulator-name = "vrtc,pmu_vccadc";
+					regulator-always-on;
+				};
+			};
+		};
+	};
+
+	kbc@7000e200 {
+		status = "okay";
+		nvidia,debounce-delay-ms = <20>;
+		nvidia,repeat-delay-ms = <160>;
+		nvidia,kbc-row-pins = <0 1 2>;
+		nvidia,kbc-col-pins = <16 17>;
+		nvidia,wakeup-source;
+		linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_POWER)
+				MATRIX_KEY(0x01, 0x00, KEY_HOME)
+				MATRIX_KEY(0x01, 0x01, KEY_BACK)
+				MATRIX_KEY(0x02, 0x01, KEY_MENU)>;
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <1000>;
+		nvidia,core-pwr-good-time = <0 3845>;
+		nvidia,core-pwr-off-time = <93727>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+		nvidia,combined-power-req;
+	};
+
+	usb@c5000000 {
+		status = "okay";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		vbus-supply = <&vbus1_reg>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		vbus-supply = <&vbus3_reg>;
+	};
+
+	sdhci@c8000400 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		bus-width = <8>;
+	};
+
+	sdhci@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb0_vbus_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		vbus1_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vbus1";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		vbus3_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vbus3";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8753-whistler",
+			     "nvidia,tegra-audio-wm8753";
+		nvidia,model = "NVIDIA Tegra Whistler";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "LOUT1",
+			"Headphone Jack", "ROUT1",
+			"MIC2", "Mic Jack",
+			"MIC2N", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&codec>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/src/arm/tegra20.dtsi b/src/arm/tegra20.dtsi
new file mode 100644
index 000000000000..e5527f742696
--- /dev/null
+++ b/src/arm/tegra20.dtsi
@@ -0,0 +1,779 @@
+#include <dt-bindings/clock/tegra20-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra20";
+	interrupt-parent = <&intc>;
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra20-host1x", "simple-bus";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe@54040000 {
+			compatible = "nvidia,tegra20-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_MPE>;
+			resets = <&tegra_car 60>;
+			reset-names = "mpe";
+		};
+
+		vi@54080000 {
+			compatible = "nvidia,tegra20-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+		};
+
+		epp@540c0000 {
+			compatible = "nvidia,tegra20-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_EPP>;
+			resets = <&tegra_car 19>;
+			reset-names = "epp";
+		};
+
+		isp@54100000 {
+			compatible = "nvidia,tegra20-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_ISP>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
+		};
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra20-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra20-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+			resets = <&tegra_car 24>;
+			reset-names = "3d";
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			nvidia,head = <0>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			nvidia,head = <1>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra20-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		tvo@542c0000 {
+			compatible = "nvidia,tegra20-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA20_CLK_TVO>;
+			status = "disabled";
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra20-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_DSI>;
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
+	};
+
+	timer@50040600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x50040600 0x20>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		clocks = <&tegra_car TEGRA20_CLK_TWD>;
+	};
+
+	intc: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a9-gic";
+		reg = <0x50041000 0x1000
+		       0x50040100 0x0100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	cache-controller@50043000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x50043000 0x1000>;
+		arm,data-latency = <5 5 2>;
+		arm,tag-latency = <4 4 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra20-timer";
+		reg = <0x60005000 0x60>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra20-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra20-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra20-apbdma";
+		reg = <0x6000a000 0x1200>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb@6000c004 {
+		compatible = "nvidia,tegra20-ahb";
+		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra20-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64   /* Chip revision */
+		       0x70000008 0x04>; /* Strapping options */
+	};
+
+	pinmux: pinmux@70000014 {
+		compatible = "nvidia,tegra20-pinmux";
+		reg = <0x70000014 0x10   /* Tri-state registers */
+		       0x70000080 0x20   /* Mux registers */
+		       0x700000a0 0x14   /* Pull-up/down registers */
+		       0x70000868 0xa8>; /* Pad control registers */
+	};
+
+	das@70000c00 {
+		compatible = "nvidia,tegra20-das";
+		reg = <0x70000c00 0x80>;
+	};
+
+	tegra_ac97: ac97@70002000 {
+		compatible = "nvidia,tegra20-ac97";
+		reg = <0x70002000 0x200>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_AC97>;
+		resets = <&tegra_car 3>;
+		reset-names = "ac97";
+		dmas = <&apbdma 12>, <&apbdma 12>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	tegra_i2s1: i2s@70002800 {
+		compatible = "nvidia,tegra20-i2s";
+		reg = <0x70002800 0x200>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_I2S1>;
+		resets = <&tegra_car 11>;
+		reset-names = "i2s";
+		dmas = <&apbdma 2>, <&apbdma 2>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	tegra_i2s2: i2s@70002a00 {
+		compatible = "nvidia,tegra20-i2s";
+		reg = <0x70002a00 0x200>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_I2S2>;
+		resets = <&tegra_car 18>;
+		reset-names = "i2s";
+		dmas = <&apbdma 1>, <&apbdma 1>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra20-uart" and to enable the APB DMA based serial
+	 * driver, the comptible is "nvidia,tegra20-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uarte: serial@70006400 {
+		compatible = "nvidia,tegra20-uart";
+		reg = <0x70006400 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_UARTE>;
+		resets = <&tegra_car 66>;
+		reset-names = "serial";
+		dmas = <&apbdma 20>, <&apbdma 20>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA20_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_RTC>;
+	};
+
+	i2c@7000c000 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C1>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000c380 {
+		compatible = "nvidia,tegra20-sflash";
+		reg = <0x7000c380 0x80>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SPI>;
+		resets = <&tegra_car 43>;
+		reset-names = "spi";
+		dmas = <&apbdma 11>, <&apbdma 11>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C2>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra20-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_I2C3>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra20-i2c-dvc";
+		reg = <0x7000d000 0x200>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_DVC>,
+			 <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC1>;
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC2>;
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC3>;
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA20_CLK_SBC4>;
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra20-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	pmc@7000e400 {
+		compatible = "nvidia,tegra20-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+	};
+
+	memory-controller@7000f000 {
+		compatible = "nvidia,tegra20-mc";
+		reg = <0x7000f000 0x024
+		       0x7000f03c 0x3c4>;
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	iommu@7000f024 {
+		compatible = "nvidia,tegra20-gart";
+		reg = <0x7000f024 0x00000018	/* controller registers */
+		       0x58000000 0x02000000>;	/* GART aperture */
+	};
+
+	memory-controller@7000f400 {
+		compatible = "nvidia,tegra20-emc";
+		reg = <0x7000f400 0x200>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra20-efuse";
+		reg = <0x7000F800 0x400>;
+		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	pcie-controller@80003000 {
+		compatible = "nvidia,tegra20-pcie";
+		device_type = "pci";
+		reg = <0x80003000 0x00000800   /* PADS registers */
+		       0x80003800 0x00000200   /* AFI registers */
+		       0x90000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
+			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000   /* port 0 registers */
+			  0x82000000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 registers */
+			  0x81000000 0 0          0x82000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0xa0000000 0xa0000000 0 0x08000000   /* non-prefetchable memory */
+			  0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA20_CLK_PEX>,
+			 <&tegra_car TEGRA20_CLK_AFI>,
+			 <&tegra_car TEGRA20_CLK_PLL_E>;
+		clock-names = "pex", "afi", "pll_e";
+		resets = <&tegra_car 70>,
+		         <&tegra_car 72>,
+		         <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		nvidia,has-legacy-mode;
+		clocks = <&tegra_car TEGRA20_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,needs-double-reset;
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@c5000000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5000000 0x4000 0xc5000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USBD>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CLK_M>,
+			 <&tegra_car TEGRA20_CLK_USBD>;
+		clock-names = "reg", "pll_u", "timer", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,has-legacy-mode;
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA20_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@c5004000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5004000 0x4000>;
+		phy_type = "ulpi";
+		clocks = <&tegra_car TEGRA20_CLK_USB2>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CDEV2>;
+		clock-names = "reg", "pll_u", "ulpi-link";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		status = "disabled";
+	};
+
+	usb@c5008000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@c5008000 {
+		compatible = "nvidia,tegra20-usb-phy";
+		reg = <0xc5008000 0x4000 0xc5000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA20_CLK_USB3>,
+			 <&tegra_car TEGRA20_CLK_PLL_U>,
+			 <&tegra_car TEGRA20_CLK_CLK_M>,
+			 <&tegra_car TEGRA20_CLK_USBD>;
+		clock-names = "reg", "pll_u", "timer", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <9>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		status = "disabled";
+	};
+
+	sdhci@c8000000 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@c8000200 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@c8000400 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@c8000600 {
+		compatible = "nvidia,tegra20-sdhci";
+		reg = <0xc8000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/src/arm/tegra30-apalis-eval.dts b/src/arm/tegra30-apalis-eval.dts
new file mode 100644
index 000000000000..6236bdecb48b
--- /dev/null
+++ b/src/arm/tegra30-apalis-eval.dts
@@ -0,0 +1,264 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis T30 on Apalis Evaluation Board";
+	compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/tps65911@2d";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartc;
+		serial3 = &uartd;
+	};
+
+	pcie-controller@00003000 {
+		status = "okay";
+
+		pci@1,0 {
+			status = "okay";
+		};
+
+		pci@2,0 {
+			status = "okay";
+		};
+
+		pci@3,0 {
+			status = "okay";
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pcie-switch@58 {
+			compatible = "plx,pex8605";
+			reg = <0x58>;
+		};
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "st,m41t00";
+			reg = <0x68>;
+		};
+	};
+
+	/* GEN2_I2C: unused */
+
+	/*
+	 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+	 * carrier board)
+	 */
+	cami2c: i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+	hdmiddc: i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Apalis SPI1 */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spidev0: spidev@1 {
+			compatible = "spidev";
+			reg = <1>;
+			spi-max-frequency = <25000000>;
+		};
+	};
+
+	/* SPI5: Apalis SPI2 */
+	spi@7000dc00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spidev1: spidev@2 {
+			compatible = "spidev";
+			reg = <2>;
+			spi-max-frequency = <25000000>;
+		};
+	};
+
+	sd1: sdhci@78000000 {
+		status = "okay";
+		bus-width = <4>;
+		/* SD1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	mmc1: sdhci@78000400 {
+		status = "okay";
+		bus-width = <8>;
+		/* MMC1_CD# */
+		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		vbus-supply = <&usbo1_vbus_reg>;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		vbus-supply = <&usbh_vbus_reg>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&usbh_vbus_reg>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		/* PWM0 */
+		pwms = <&pwm 0 5000000>;
+		brightness-levels = <255 231 223 207 191 159 127 0>;
+		default-brightness-level = <6>;
+		/* BKL1_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu", "simple-panel";
+
+		backlight = <&backlight>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		pwm1 {
+			label = "PWM1";
+			pwms = <&pwm 3 19600>;
+			max-brightness = <255>;
+		};
+
+		pwm2 {
+			label = "PWM2";
+			pwms = <&pwm 2 19600>;
+			max-brightness = <255>;
+		};
+
+		pwm3 {
+			label = "PWM3";
+			pwms = <&pwm 1 19600>;
+			max-brightness = <255>;
+		};
+	};
+
+	regulators {
+		sys_5v0_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		/* USBO1_EN */
+		usbo1_vbus_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usbo1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&sys_5v0_reg>;
+		};
+
+		/* USBH_EN */
+		usbh_vbus_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usbh_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&sys_5v0_reg>;
+		};
+	};
+};
diff --git a/src/arm/tegra30-apalis.dtsi b/src/arm/tegra30-apalis.dtsi
new file mode 100644
index 000000000000..a5446cba9804
--- /dev/null
+++ b/src/arm/tegra30-apalis.dtsi
@@ -0,0 +1,687 @@
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Device Tree
+ * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C
+ */
+/ {
+	model = "Toradex Apalis T30";
+	compatible = "toradex,apalis_t30", "nvidia,tegra30";
+
+	pcie-controller@00003000 {
+		avdd-pexa-supply = <&vdd2_reg>;
+		vdd-pexa-supply = <&vdd2_reg>;
+		avdd-pexb-supply = <&vdd2_reg>;
+		vdd-pexb-supply = <&vdd2_reg>;
+		avdd-pex-pll-supply = <&vdd2_reg>;
+		avdd-plle-supply = <&ldo6_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		hvdd-pex-supply = <&sys_3v3_reg>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			vdd-supply = <&sys_3v3_reg>;
+			pll-supply = <&vio_reg>;
+
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmiddc>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Apalis BKL1_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis BKL1_PWM */
+			uart3_rts_n_pc0 {
+				nvidia,pins =	"uart3_rts_n_pc0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+			uart3_cts_n_pa1 {
+				nvidia,pins =	"uart3_cts_n_pa1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis CAN1 on SPI6 */
+			spi2_cs0_n_px3 {
+				nvidia,pins =   "spi2_cs0_n_px3",
+						"spi2_miso_px1",
+						"spi2_mosi_px0",
+						"spi2_sck_px2";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* CAN_INT1 */
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis CAN2 on SPI4 */
+			gmi_a16_pj7 {
+				nvidia,pins =   "gmi_a16_pj7",
+						"gmi_a17_pb0",
+						"gmi_a18_pb1",
+						"gmi_a19_pk7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* CAN_INT2 */
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis I2C3 */
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+					      "cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis MMC1 */
+			sdmmc3_clk_pa6 {
+				nvidia,pins =	"sdmmc3_clk_pa6",
+						"sdmmc3_cmd_pa7";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat0_pb7 {
+				nvidia,pins =	"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat5_pd0",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis MMC1_CD# */
+			pv3 {
+				nvidia,pins = "pv3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis PWM1 */
+			gpio_pu6 {
+				nvidia,pins =	"gpio_pu6";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM2 */
+			gpio_pu5 {
+				nvidia,pins =	"gpio_pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM3 */
+			gpio_pu4 {
+				nvidia,pins =	"gpio_pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis PWM4 */
+			gpio_pu3 {
+				nvidia,pins =	"gpio_pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis RESET_MOCI# */
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SD1 */
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins =	"sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			/* Apalis SD1_CD# */
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis SPI1 */
+			spi1_sck_px5 {
+				nvidia,pins =   "spi1_sck_px5",
+						"spi1_mosi_px4",
+						"spi1_miso_px7",
+						"spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis SPI2 */
+			lcd_sck_pz4 {
+				nvidia,pins =   "lcd_sck_pz4",
+						"lcd_sdout_pn5",
+						"lcd_sdin_pz2",
+						"lcd_cs0_n_pn4";
+				nvidia,function = "spi5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART1 */
+			ulpi_data0 {
+				nvidia,pins =   "ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART2 */
+			ulpi_clk_py0 {
+				nvidia,pins =   "ulpi_clk_py0",
+						"ulpi_dir_py1",
+						"ulpi_nxt_py2",
+						"ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART3 */
+			uart2_rxd_pc3 {
+				nvidia,pins =   "uart2_rxd_pc3",
+						"uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis UART4 */
+			uart3_rxd_pw7 {
+				nvidia,pins =   "uart3_rxd_pw7",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_EN */
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Apalis USBO1_OC# */
+			gen2_i2c_sda_pt6 {
+				nvidia,pins = "gen2_i2c_sda_pt6";
+				nvidia,function = "rsvd4";
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Apalis WAKE1_MICO */
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* eMMC (On-module) */
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* LVDS Transceiver Configuration */
+			pbb0 {
+				nvidia,pins =	"pbb0",
+						"pbb7",
+						"pcc1",
+						"pcc2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pbb3 {
+				nvidia,pins =	"pbb3",
+						"pbb4",
+						"pbb5",
+						"pbb6";
+				nvidia,function = "displayb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Power I2C (On-module) */
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+					      "pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * THERMD_ALERT#, unlatched I2C address pin of LM95245
+			 * temperature sensor therefore requires disabling for
+			 * now
+			 */
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* TOUCH_PEN_INT# */
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	hdmiddc: i2c@7000c700 {
+		clock-frequency = <100000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&sys_3v3_reg>;
+			vcc2-supply = <&sys_3v3_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&sys_3v3_reg>;
+			vcc5-supply = <&sys_3v3_reg>;
+			vcc6-supply = <&vio_reg>;
+			vcc7-supply = <&charge_pump_5v0_reg>;
+			vccio-supply = <&sys_3v3_reg>;
+
+			regulators {
+				/* SW1: +V1.35_VDDIO_DDR */
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				/* SW2: +V1.05 */
+				vdd2_reg: vdd2 {
+					regulator-name =
+						"vdd_pexa,vdd_pexb,vdd_sata";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* SW CTRL: +V1.0_VDD_CPU */
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				/* SWIO: +V1.8 */
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO1: unused */
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+				 * see also v3_3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "en_3v3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* +V1.2_CSI */
+				ldo3_reg: ldo3 {
+					regulator-name =
+						"avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				/* +V1.2_VDD_RTC */
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "avdd_vdac";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_plle";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				/* +V1.2_AVDD_PLL */
+				ldo7_reg: ldo7 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* +V1.0_VDD_DDR_HS */
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/* STMPE811 touch screen controller */
+		stmpe811@41 {
+			compatible = "st,stmpe811";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x41>;
+			interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+			interrupt-parent = <&gpio>;
+			interrupt-controller;
+			id = <0>;
+			blocks = <0x5>;
+			irq-trigger = <0x1>;
+
+			stmpe_touchscreen {
+				compatible = "st,stmpe-ts";
+				reg = <0>;
+				/* 3.25 MHz ADC clock speed */
+				st,adc-freq = <1>;
+				/* 8 sample average control */
+				st,ave-ctrl = <3>;
+				/* 7 length fractional part in z */
+				st,fraction-z = <7>;
+				/*
+				 * 50 mA typical 80 mA max touchscreen drivers
+				 * current limit value
+				 */
+				st,i-drive = <1>;
+				/* 12-bit ADC */
+				st,mod-12b = <1>;
+				/* internal ADC reference */
+				st,ref-sel = <0>;
+				/* ADC converstion time: 80 clocks */
+				st,sample-time = <4>;
+				/* 1 ms panel driver settling time */
+				st,settling = <3>;
+				/* 5 ms touch detect interrupt delay */
+				st,touch-det-delay = <5>;
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT_N directly connected to PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		tps62362@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-low;
+			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
+			ti,vsel1-state-low;
+		};
+	};
+
+	/* SPI4: CAN2 */
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@1 {
+			compatible = "microchip,mcp2515";
+			reg = <1>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	/* SPI6: CAN1 */
+	spi@7000de00 {
+		status = "okay";
+		spi-max-frequency = <10000000>;
+
+		can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+			spi-max-frequency = <10000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clk@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+		clk16m: clk@1 {
+			compatible = "fixed-clock";
+			reg=<1>;
+			#clock-cells = <0>;
+			clock-frequency = <16000000>;
+			clock-output-names = "clk16m";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sys_3v3_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		charge_pump_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/tegra30-beaver.dts b/src/arm/tegra30-beaver.dts
new file mode 100644
index 000000000000..6b157eeabcc5
--- /dev/null
+++ b/src/arm/tegra30-beaver.dts
@@ -0,0 +1,523 @@
+/dts-v1/;
+
+#include "tegra30.dtsi"
+
+/ {
+	model = "NVIDIA Tegra30 Beaver evaluation board";
+	compatible = "nvidia,beaver", "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps65911@2d";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+	};
+
+	memory {
+		reg = <0x80000000 0x7ff00000>;
+	};
+
+	pcie-controller@00003000 {
+		status = "okay";
+
+		avdd-pexa-supply = <&ldo1_reg>;
+		vdd-pexa-supply = <&ldo1_reg>;
+		avdd-pexb-supply = <&ldo1_reg>;
+		vdd-pexb-supply = <&ldo1_reg>;
+		avdd-pex-pll-supply = <&ldo1_reg>;
+		avdd-plle-supply = <&ldo1_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		hvdd-pex-supply = <&sys_3v3_pexs_reg>;
+
+		pci@1,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			status = "okay";
+
+			hdmi-supply = <&vdd_5v0_hdmi>;
+			vdd-supply = <&sys_3v3_reg>;
+			pll-supply = <&vio_reg>;
+
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmiddc>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins =	"sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins =	"sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins =	"dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			pex_l1_prsnt_n_pdd4 {
+				nvidia,pins =	"pex_l1_prsnt_n_pdd4",
+						"pex_l1_clkreq_n_pdd6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <1>;
+				nvidia,slew-rate-falling = <1>;
+			};
+			gpv {
+				nvidia,pins = "drive_gpv";
+				nvidia,pull-up-strength = <16>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	hdmiddc: i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		rt5640: rt5640@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+			realtek,ldo1-en-gpios =
+				<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v_in_reg>;
+			vcc2-supply = <&vdd_5v_in_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&vdd_5v_in_reg>;
+			vcc5-supply = <&vdd_5v_in_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_5v_in_reg>;
+			vccio-supply = <&vdd_5v_in_reg>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps62361@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@1 {
+			compatible = "winbond,w25q32";
+			reg = <1>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	sdhci@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	phy2: usb-phy@7d004000 {
+		vbus-supply = <&sys_3v3_reg>;
+		status = "okay";
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		gpled1 {
+			label = "LED1"; /* CR5A1 (blue) */
+			gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+		};
+		gpled2 {
+			label = "LED2"; /* CR4A2 (green) */
+			gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_5v_in_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_5v_in";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		chargepump_5v_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "chargepump_5v";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			enable-active-high;
+			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		ddr_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "vdd_ddr";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_5v_in_reg>;
+		};
+
+		vdd_5v_sata_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vdd_5v_sata";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_5v_in_reg>;
+		};
+
+		usb1_vbus_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v_in_reg>;
+		};
+
+		usb3_vbus_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "usb3_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v_in_reg>;
+		};
+
+		sys_3v3_reg: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "sys_3v3,vdd_3v3_alw";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vdd_5v_in_reg>;
+		};
+
+		sys_3v3_pexs_reg: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "sys_3v3_pexs";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_5v0_hdmi: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "+VDD_5V_HDMI";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			vin-supply = <&sys_3v3_reg>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-beaver",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "NVIDIA Tegra Beaver";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Mic Jack", "MICBIAS1",
+			"IN2P", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/src/arm/tegra30-cardhu-a02.dts b/src/arm/tegra30-cardhu-a02.dts
new file mode 100644
index 000000000000..c9bfedcca6ed
--- /dev/null
+++ b/src/arm/tegra30-cardhu-a02.dts
@@ -0,0 +1,94 @@
+/dts-v1/;
+
+#include "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A02 version of board */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
+	compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
+
+	sdhci@78000400 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ddr_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "vdd_ddr";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "sys_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb1_vbus_reg: regulator@102 {
+			compatible = "regulator-fixed";
+			reg = <102>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		usb3_vbus_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
+			regulator-name = "usb3_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		vdd_5v0_reg: regulator@104 {
+			compatible = "regulator-fixed";
+			reg = <104>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		vdd_bl_reg: regulator@105 {
+			compatible = "regulator-fixed";
+			reg = <105>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
diff --git a/src/arm/tegra30-cardhu-a04.dts b/src/arm/tegra30-cardhu-a04.dts
new file mode 100644
index 000000000000..fadf55e46b2b
--- /dev/null
+++ b/src/arm/tegra30-cardhu-a04.dts
@@ -0,0 +1,105 @@
+/dts-v1/;
+
+#include "tegra30-cardhu.dtsi"
+
+/* This dts file support the cardhu A04 and later versions of board */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
+	compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
+
+	sdhci@78000400 {
+		status = "okay";
+		power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+		keep-power-in-suspend;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ddr_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			regulator-name = "ddr";
+			reg = <100>;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		sys_3v3_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "sys_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb1_vbus_reg: regulator@102 {
+			compatible = "regulator-fixed";
+			reg = <102>;
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		usb3_vbus_reg: regulator@103 {
+			compatible = "regulator-fixed";
+			reg = <103>;
+			regulator-name = "usb3_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+
+		vdd_5v0_reg: regulator@104 {
+			compatible = "regulator-fixed";
+			reg = <104>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		vdd_bl_reg: regulator@105 {
+			compatible = "regulator-fixed";
+			reg = <105>;
+			regulator-name = "vdd_bl";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		vdd_bl2_reg: regulator@106 {
+			compatible = "regulator-fixed";
+			reg = <106>;
+			regulator-name = "vdd_bl2";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/src/arm/tegra30-cardhu.dtsi b/src/arm/tegra30-cardhu.dtsi
new file mode 100644
index 000000000000..a1b682ea01bd
--- /dev/null
+++ b/src/arm/tegra30-cardhu.dtsi
@@ -0,0 +1,618 @@
+#include "tegra30.dtsi"
+
+/**
+ * This file contains common DT entry for all fab version of Cardhu.
+ * There is multiple fab version of Cardhu starting from A01 to A07.
+ * Cardhu fab version A01 and A03 are not supported. Cardhu fab version
+ * A02 will have different sets of GPIOs for fixed regulator compare to
+ * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
+ * compatible with fab version A04. Based on Cardhu fab version, the
+ * related dts file need to be chosen like for Cardhu fab version A02,
+ * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
+ * tegra30-cardhu-a04.dts.
+ * The identification of board is done in two ways, by looking the sticker
+ * on PCB and by reading board id eeprom.
+ * The stciker will have number like 600-81291-1000-002 C.3. In this 4th
+ * number is the fab version like here it is 002 and hence fab version A02.
+ * The (downstream internal) U-Boot of Cardhu display the board-id as
+ * follows:
+ * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
+ * In this Fab version is 02 i.e. A02.
+ * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
+ * The location 0x8 of this eeprom contains the Fab version. It is 1 byte
+ * wide.
+ */
+
+/ {
+	model = "NVIDIA Tegra30 Cardhu evaluation board";
+	compatible = "nvidia,cardhu", "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000d000/tps65911@2d";
+		rtc1 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartc;
+	};
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	pcie-controller@00003000 {
+		status = "okay";
+
+		/* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
+		avdd-pexb-supply = <&ldo1_reg>;
+		vdd-pexb-supply = <&ldo1_reg>;
+		avdd-pex-pll-supply = <&ldo1_reg>;
+		hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
+		vddio-pex-ctl-supply = <&sys_3v3_reg>;
+		avdd-plle-supply = <&ldo2_reg>;
+
+		pci@1,0 {
+			nvidia,num-lanes = <4>;
+		};
+
+		pci@2,0 {
+			nvidia,num-lanes = <1>;
+		};
+
+		pci@3,0 {
+			status = "okay";
+			nvidia,num-lanes = <1>;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				nvidia,panel = <&panel>;
+			};
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins =	"sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins =	"sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins =	"dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+			uart3_txd_pw6 {
+				nvidia,pins =	"uart3_txd_pw6",
+						"uart3_cts_n_pa1",
+						"uart3_rts_n_pc0",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	panelddc: i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* ALS and Proximity sensor */
+		isl29028@44 {
+			compatible = "isil,isl29028";
+			reg = <0x44>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2cmux@70 {
+			compatible = "nxp,pca9546";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x70>;
+		};
+	};
+
+	i2c@7000c700 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
+		};
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_ac_bat_reg>;
+			vcc2-supply = <&vdd_ac_bat_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&vdd_5v0_reg>;
+			vcc5-supply = <&vdd_ac_bat_reg>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_ac_bat_reg>;
+			vccio-supply = <&vdd_ac_bat_reg>;
+
+			regulators {
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd_1v5_gen";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+				};
+
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&sys_3v3_reg>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		tps62361@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+		};
+	};
+
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@1 {
+			compatible = "winbond,w25q32";
+			reg = <1>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	sdhci@78000000 {
+		status = "okay";
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+		bus-width = <4>;
+	};
+
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		vbus-supply = <&usb3_vbus_reg>;
+		status = "okay";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_bl_reg>;
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	panel: panel {
+		compatible = "chunghwa,claa101wb01", "simple-panel";
+		ddc-i2c-bus = <&panelddc>;
+
+		power-supply = <&vdd_pnl1_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd_ac_bat_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "vdd_ac_bat";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		cam_1v8_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "cam_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&vio_reg>;
+		};
+
+		cp_5v_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "cp_5v";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			enable-active-high;
+			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		emmc_3v3_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "emmc_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		modem_3v3_reg: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "modem_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		pex_hvdd_3v3_reg: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "pex_hvdd_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam1_ldo_reg: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "vdd_cam1_ldo";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam2_ldo_reg: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			regulator-name = "vdd_cam2_ldo";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_cam3_ldo_reg: regulator@8 {
+			compatible = "regulator-fixed";
+			reg = <8>;
+			regulator-name = "vdd_cam3_ldo";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_com_reg: regulator@9 {
+			compatible = "regulator-fixed";
+			reg = <9>;
+			regulator-name = "vdd_com";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_fuse_3v3_reg: regulator@10 {
+			compatible = "regulator-fixed";
+			reg = <10>;
+			regulator-name = "vdd_fuse_3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_pnl1_reg: regulator@11 {
+			compatible = "regulator-fixed";
+			reg = <11>;
+			regulator-name = "vdd_pnl1";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+			vin-supply = <&sys_3v3_reg>;
+		};
+
+		vdd_vid_reg: regulator@12 {
+			compatible = "regulator-fixed";
+			reg = <12>;
+			regulator-name = "vddio_vid";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+			gpio-open-drain;
+			vin-supply = <&vdd_5v0_reg>;
+		};
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-cardhu",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "NVIDIA Tegra Cardhu";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
+			GPIO_ACTIVE_HIGH>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA30_CLK_EXTERN1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+};
diff --git a/src/arm/tegra30-colibri-eval-v3.dts b/src/arm/tegra30-colibri-eval-v3.dts
new file mode 100644
index 000000000000..4d3ddc585641
--- /dev/null
+++ b/src/arm/tegra30-colibri-eval-v3.dts
@@ -0,0 +1,208 @@
+/dts-v1/;
+
+#include "tegra30-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri T30 on Colibri Evaluation Board";
+	compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
+
+	aliases {
+		rtc0 = "/i2c@7000c000/rtc@68";
+		rtc1 = "/i2c@7000d000/tps65911@2d";
+		rtc2 = "/rtc@7000e000";
+		serial0 = &uarta;
+		serial1 = &uartb;
+		serial2 = &uartd;
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+		hdmi@54280000 {
+			status = "okay";
+		};
+	};
+
+	serial@70006000 {
+		status = "okay";
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	/*
+	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+	 * board)
+	 */
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		/* M41T0M6 real time clock on carrier board */
+		rtc@68 {
+			compatible = "stm,m41t00";
+			reg = <0x68>;
+		};
+	};
+
+	/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+	hdmiddc: i2c@7000c700 {
+		status = "okay";
+	};
+
+	/* SPI1: Colibri SSP */
+	spi@7000d400 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		can0: can@0 {
+			compatible = "microchip,mcp2515";
+			reg = <0>;
+			clocks = <&clk16m>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+			spi-max-frequency = <10000000>;
+		};
+		spidev0: spi@1 {
+			compatible = "spidev";
+			reg = <1>;
+			spi-max-frequency = <25000000>;
+		};
+	};
+
+	sdhci@78000200 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		no-1-8-v;
+	};
+
+	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "otg";
+		vbus-supply = <&usbc_vbus_reg>;
+	};
+
+	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		vbus-supply = <&usbh_vbus_reg>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		/* PWM<A> */
+		pwms = <&pwm 0 5000000>;
+		brightness-levels = <255 128 64 32 16 8 4 0>;
+		default-brightness-level = <6>;
+		/* BL_ON */
+		enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	clocks {
+		clk16m: clk@1 {
+			compatible = "fixed-clock";
+			reg=<1>;
+			#clock-cells = <0>;
+			clock-frequency = <16000000>;
+			clock-output-names = "clk16m";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+	};
+
+	panel: panel {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu", "simple-panel";
+
+		backlight = <&backlight>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		pwmb {
+			label = "PWM<B>";
+			pwms = <&pwm 1 19600>;
+			max-brightness = <255>;
+		};
+		pwmc {
+			label = "PWM<C>";
+			pwms = <&pwm 2 19600>;
+			max-brightness = <255>;
+		};
+		pwmd {
+			label = "PWM<D>";
+			pwms = <&pwm 3 19600>;
+			max-brightness = <255>;
+		};
+	};
+
+	regulators {
+		sys_5v0_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		usbc_vbus_reg: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usbc_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			vin-supply = <&sys_5v0_reg>;
+		};
+
+		/* USBH_PEN */
+		usbh_vbus_reg: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usbh_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+			vin-supply = <&sys_5v0_reg>;
+		};
+	};
+};
diff --git a/src/arm/tegra30-colibri.dtsi b/src/arm/tegra30-colibri.dtsi
new file mode 100644
index 000000000000..c4ed1bec4d92
--- /dev/null
+++ b/src/arm/tegra30-colibri.dtsi
@@ -0,0 +1,386 @@
+#include <dt-bindings/input/input.h>
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Colibri T30 Device Tree
+ * Compatible for Revisions 1.1B/1.1C/1.1D
+ */
+/ {
+	model = "Toradex Colibri T30";
+	compatible = "toradex,colibri_t30", "nvidia,tegra30";
+
+	memory {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	host1x@50000000 {
+		hdmi@54280000 {
+			vdd-supply = <&sys_3v3_reg>;
+			pll-supply = <&vio_reg>;
+
+			nvidia,hpd-gpio =
+				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+			nvidia,ddc-i2c-bus = <&hdmiddc>;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			/* Colibri BL_ON */
+			pv2 {
+				nvidia,pins = "pv2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri Backlight PWM<A> */
+			sdmmc3_dat3_pb4 {
+				nvidia,pins =	"sdmmc3_dat3_pb4";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri CAN_INT */
+			kb_row8_ps0 {
+				nvidia,pins = "kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/*
+			 * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+			 * todays display need DE, disable LCD_M1
+			 */
+			lcd_m1_pw1 {
+				nvidia,pins = "lcd_m1_pw1";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Thermal alert, need to be disabled */
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "rsvd3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri MMC */
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins =	"kb_row11_ps3",
+						"kb_row12_ps4",
+						"kb_row13_ps5",
+						"kb_row14_ps6",
+						"kb_row15_ps7";
+				nvidia,function = "sdmmc2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri SSP */
+			ulpi_clk_py0 {
+				nvidia,pins =   "ulpi_clk_py0",
+						"ulpi_dir_py1",
+						"ulpi_nxt_py2",
+						"ulpi_stp_py3";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc3_dat6_pd3 {
+				nvidia,pins =	"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			/* Colibri UART_A */
+			ulpi_data0 {
+				nvidia,pins =   "ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART_B */
+			gmi_a16_pj7 {
+				nvidia,pins =   "gmi_a16_pj7",
+						"gmi_a17_pb0",
+						"gmi_a18_pb1",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* Colibri UART_C */
+			uart2_rxd {
+				nvidia,pins =   "uart2_rxd_pc3",
+						"uart2_txd_pc2";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			/* eMMC */
+			sdmmc4_clk_pcc4 {
+				nvidia,pins =	"sdmmc4_clk_pcc4",
+						"sdmmc4_rst_n_pcc3";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc4_dat0_paa0 {
+				nvidia,pins =	"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	hdmiddc: i2c@7000c700 {
+		clock-frequency = <100000>;
+	};
+
+	/*
+	 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+	 * touch screen controller
+	 */
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <100000>;
+
+		pmic: tps65911@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&sys_3v3_reg>;
+			vcc2-supply = <&sys_3v3_reg>;
+			vcc3-supply = <&vio_reg>;
+			vcc4-supply = <&sys_3v3_reg>;
+			vcc5-supply = <&sys_3v3_reg>;
+			vcc6-supply = <&vio_reg>;
+			vcc7-supply = <&charge_pump_5v0_reg>;
+			vccio-supply = <&sys_3v3_reg>;
+
+			regulators {
+				/* SW1: +V1.35_VDDIO_DDR */
+				vdd1_reg: vdd1 {
+					regulator-name = "vddio_ddr_1v35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				/* SW2: unused */
+
+				/* SW CTRL: +V1.0_VDD_CPU */
+				vddctrl_reg: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+				};
+
+				/* SWIO: +V1.8 */
+				vio_reg: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				/* LDO1: unused */
+
+				/*
+				 * EN_+V3.3 switching via FET:
+				 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
+				 * see also v3_3 fixed supply
+				 */
+				ldo2_reg: ldo2 {
+					regulator-name = "en_3v3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				/* LDO3: unused */
+
+				/* +V1.2_VDD_RTC */
+				ldo4_reg: ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V2.8_AVDD_VDAC:
+				 * only required for analog RGB
+				 */
+				ldo5_reg: ldo5 {
+					regulator-name = "avdd_vdac";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				/*
+				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+				 * but LDO6 can't set voltage in 50mV
+				 * granularity
+				 */
+				ldo6_reg: ldo6 {
+					regulator-name = "avdd_plle";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				/* +V1.2_AVDD_PLL */
+				ldo7_reg: ldo7 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				/* +V1.0_VDD_DDR_HS */
+				ldo8_reg: ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		/*
+		 * LM95245 temperature sensor
+		 * Note: OVERT_N directly connected to PMIC PWRDN
+		 */
+		temp-sensor@4c {
+			compatible = "national,lm95245";
+			reg = <0x4c>;
+		};
+
+		/* SW: +V1.2_VDD_CORE */
+		tps62362@60 {
+			compatible = "ti,tps62362";
+			reg = <0x60>;
+
+			regulator-name = "tps62362-vout";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,vsel0-state-low;
+			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
+			ti,vsel1-state-low;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <5000>;
+		nvidia,cpu-pwr-off-time = <5000>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	emmc: sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		non-removable;
+	};
+
+	/* EHCI instance 1: USB2_DP/N -> AX88772B */
+	usb@7d004000 {
+		status = "okay";
+	};
+
+	usb-phy@7d004000 {
+		status = "okay";
+		nvidia,is-wired = <1>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clk@0 {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sys_3v3_reg: regulator@100 {
+			compatible = "regulator-fixed";
+			reg = <100>;
+			regulator-name = "3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		charge_pump_5v0_reg: regulator@101 {
+			compatible = "regulator-fixed";
+			reg = <101>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+};
diff --git a/src/arm/tegra30.dtsi b/src/arm/tegra30.dtsi
new file mode 100644
index 000000000000..db4810df142c
--- /dev/null
+++ b/src/arm/tegra30.dtsi
@@ -0,0 +1,912 @@
+#include <dt-bindings/clock/tegra30-car.h>
+#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra30-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra30";
+	interrupt-parent = <&intc>;
+
+	pcie-controller@00003000 {
+		compatible = "nvidia,tegra30-pcie";
+		device_type = "pci";
+		reg = <0x00003000 0x00000800   /* PADS registers */
+		       0x00003800 0x00000200   /* AFI registers */
+		       0x10000000 0x10000000>; /* configuration space */
+		reg-names = "pads", "afi", "cs";
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
+			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupt-names = "intr", "msi";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+		bus-range = <0x00 0xff>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000   /* port 0 configuration space */
+			  0x82000000 0 0x00001000 0x00001000 0 0x00001000   /* port 1 configuration space */
+			  0x82000000 0 0x00004000 0x00004000 0 0x00001000   /* port 2 configuration space */
+			  0x81000000 0 0          0x02000000 0 0x00010000   /* downstream I/O */
+			  0x82000000 0 0x20000000 0x20000000 0 0x08000000   /* non-prefetchable memory */
+			  0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+
+		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
+			 <&tegra_car TEGRA30_CLK_AFI>,
+			 <&tegra_car TEGRA30_CLK_PLL_E>,
+			 <&tegra_car TEGRA30_CLK_CML0>;
+		clock-names = "pex", "afi", "pll_e", "cml";
+		resets = <&tegra_car 70>,
+		         <&tegra_car 72>,
+		         <&tegra_car 74>;
+		reset-names = "pex", "afi", "pcie_x";
+		status = "disabled";
+
+		pci@1,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
+			reg = <0x000800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@2,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
+			reg = <0x001000 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+
+		pci@3,0 {
+			device_type = "pci";
+			assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
+			reg = <0x001800 0 0 0 0>;
+			status = "disabled";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			nvidia,num-lanes = <2>;
+		};
+	};
+
+	host1x@50000000 {
+		compatible = "nvidia,tegra30-host1x", "simple-bus";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe@54040000 {
+			compatible = "nvidia,tegra30-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_MPE>;
+			resets = <&tegra_car 60>;
+			reset-names = "mpe";
+		};
+
+		vi@54080000 {
+			compatible = "nvidia,tegra30-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_VI>;
+			resets = <&tegra_car 20>;
+			reset-names = "vi";
+		};
+
+		epp@540c0000 {
+			compatible = "nvidia,tegra30-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_EPP>;
+			resets = <&tegra_car 19>;
+			reset-names = "epp";
+		};
+
+		isp@54100000 {
+			compatible = "nvidia,tegra30-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_ISP>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
+		};
+
+		gr2d@54140000 {
+			compatible = "nvidia,tegra30-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
+		};
+
+		gr3d@54180000 {
+			compatible = "nvidia,tegra30-gr3d";
+			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_GR3D
+				  &tegra_car TEGRA30_CLK_GR3D2>;
+			clock-names = "3d", "3d2";
+			resets = <&tegra_car 24>,
+			         <&tegra_car 98>;
+			reset-names = "3d", "3d2";
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
+				 <&tegra_car TEGRA30_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DC>;
+
+			nvidia,head = <0>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra30-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_DISP2>,
+				 <&tegra_car TEGRA30_CLK_PLL_P>;
+			clock-names = "dc", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
+
+			iommus = <&mc TEGRA_SWGROUP_DCB>;
+
+			nvidia,head = <1>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi@54280000 {
+			compatible = "nvidia,tegra30-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_HDMI>,
+				 <&tegra_car TEGRA30_CLK_PLL_D2_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
+			status = "disabled";
+		};
+
+		tvo@542c0000 {
+			compatible = "nvidia,tegra30-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA30_CLK_TVO>;
+			status = "disabled";
+		};
+
+		dsi@54300000 {
+			compatible = "nvidia,tegra30-dsi";
+			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_DSIA>;
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
+	};
+
+	timer@50040600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x50040600 0x20>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clocks = <&tegra_car TEGRA30_CLK_TWD>;
+	};
+
+	intc: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a9-gic";
+		reg = <0x50041000 0x1000
+		       0x50040100 0x0100>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	cache-controller@50043000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x50043000 0x1000>;
+		arm,data-latency = <6 6 2>;
+		arm,tag-latency = <5 5 2>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	timer@60005000 {
+		compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
+		reg = <0x60005000 0x400>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_TIMER>;
+	};
+
+	tegra_car: clock@60006000 {
+		compatible = "nvidia,tegra30-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	flow-controller@60007000 {
+		compatible = "nvidia,tegra30-flowctrl";
+		reg = <0x60007000 0x1000>;
+	};
+
+	apbdma: dma@6000a000 {
+		compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+		reg = <0x6000a000 0x1400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_APBDMA>;
+		resets = <&tegra_car 34>;
+		reset-names = "dma";
+		#dma-cells = <1>;
+	};
+
+	ahb: ahb@6000c004 {
+		compatible = "nvidia,tegra30-ahb";
+		reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra30-gpio";
+		reg = <0x6000d000 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+	};
+
+	apbmisc@70000800 {
+		compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
+		reg = <0x70000800 0x64   /* Chip revision */
+		       0x70000008 0x04>; /* Strapping options */
+	};
+
+	pinmux: pinmux@70000868 {
+		compatible = "nvidia,tegra30-pinmux";
+		reg = <0x70000868 0xd4    /* Pad control registers */
+		       0x70003000 0x3e4>; /* Mux registers */
+	};
+
+	/*
+	 * There are two serial driver i.e. 8250 based simple serial
+	 * driver and APB DMA based serial driver for higher baudrate
+	 * and performace. To enable the 8250 based driver, the compatible
+	 * is "nvidia,tegra30-uart", "nvidia,tegra20-uart" and to enable
+	 * the APB DMA based serial driver, the comptible is
+	 * "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
+	 */
+	uarta: serial@70006000 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTA>;
+		resets = <&tegra_car 6>;
+		reset-names = "serial";
+		dmas = <&apbdma 8>, <&apbdma 8>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTB>;
+		resets = <&tegra_car 7>;
+		reset-names = "serial";
+		dmas = <&apbdma 9>, <&apbdma 9>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTC>;
+		resets = <&tegra_car 55>;
+		reset-names = "serial";
+		dmas = <&apbdma 10>, <&apbdma 10>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uartd: serial@70006300 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTD>;
+		resets = <&tegra_car 65>;
+		reset-names = "serial";
+		dmas = <&apbdma 19>, <&apbdma 19>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	uarte: serial@70006400 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006400 0x100>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_UARTE>;
+		resets = <&tegra_car 66>;
+		reset-names = "serial";
+		dmas = <&apbdma 20>, <&apbdma 20>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	pwm: pwm@7000a000 {
+		compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
+		reg = <0x7000a000 0x100>;
+		#pwm-cells = <2>;
+		clocks = <&tegra_car TEGRA30_CLK_PWM>;
+		resets = <&tegra_car 17>;
+		reset-names = "pwm";
+		status = "disabled";
+	};
+
+	rtc@7000e000 {
+		compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc";
+		reg = <0x7000e000 0x100>;
+		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_RTC>;
+	};
+
+	i2c@7000c000 {
+		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c000 0x100>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C1>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 12>;
+		reset-names = "i2c";
+		dmas = <&apbdma 21>, <&apbdma 21>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c400 0x100>;
+		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C2>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 54>;
+		reset-names = "i2c";
+		dmas = <&apbdma 22>, <&apbdma 22>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c500 0x100>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C3>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 67>;
+		reset-names = "i2c";
+		dmas = <&apbdma 23>, <&apbdma 23>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000c700 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C4>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		resets = <&tegra_car 103>;
+		reset-names = "i2c";
+		clock-names = "div-clk", "fast-clk";
+		dmas = <&apbdma 26>, <&apbdma 26>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000d000 0x100>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_I2C5>,
+			 <&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
+		clock-names = "div-clk", "fast-clk";
+		resets = <&tegra_car 47>;
+		reset-names = "i2c";
+		dmas = <&apbdma 24>, <&apbdma 24>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d400 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC1>;
+		resets = <&tegra_car 41>;
+		reset-names = "spi";
+		dmas = <&apbdma 15>, <&apbdma 15>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC2>;
+		resets = <&tegra_car 44>;
+		reset-names = "spi";
+		dmas = <&apbdma 16>, <&apbdma 16>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d800 0x200>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC3>;
+		resets = <&tegra_car 46>;
+		reset-names = "spi";
+		dmas = <&apbdma 17>, <&apbdma 17>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC4>;
+		resets = <&tegra_car 68>;
+		reset-names = "spi";
+		dmas = <&apbdma 18>, <&apbdma 18>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC5>;
+		resets = <&tegra_car 104>;
+		reset-names = "spi";
+		dmas = <&apbdma 27>, <&apbdma 27>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000de00 0x200>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&tegra_car TEGRA30_CLK_SBC6>;
+		resets = <&tegra_car 106>;
+		reset-names = "spi";
+		dmas = <&apbdma 28>, <&apbdma 28>;
+		dma-names = "rx", "tx";
+		status = "disabled";
+	};
+
+	kbc@7000e200 {
+		compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc";
+		reg = <0x7000e200 0x100>;
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_KBC>;
+		resets = <&tegra_car 36>;
+		reset-names = "kbc";
+		status = "disabled";
+	};
+
+	pmc@7000e400 {
+		compatible = "nvidia,tegra30-pmc";
+		reg = <0x7000e400 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>;
+		clock-names = "pclk", "clk32k_in";
+	};
+
+	mc: memory-controller@7000f000 {
+		compatible = "nvidia,tegra30-mc";
+		reg = <0x7000f000 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_MC>;
+		clock-names = "mc";
+
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+		#iommu-cells = <1>;
+	};
+
+	fuse@7000f800 {
+		compatible = "nvidia,tegra30-efuse";
+		reg = <0x7000f800 0x400>;
+		clocks = <&tegra_car TEGRA30_CLK_FUSE>;
+		clock-names = "fuse";
+		resets = <&tegra_car 39>;
+		reset-names = "fuse";
+	};
+
+	ahub@70080000 {
+		compatible = "nvidia,tegra30-ahub";
+		reg = <0x70080000 0x200
+		       0x70080200 0x100>;
+		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
+			 <&tegra_car TEGRA30_CLK_APBIF>;
+		clock-names = "d_audio", "apbif";
+		resets = <&tegra_car 106>, /* d_audio */
+			 <&tegra_car 107>, /* apbif */
+			 <&tegra_car 30>,  /* i2s0 */
+			 <&tegra_car 11>,  /* i2s1 */
+			 <&tegra_car 18>,  /* i2s2 */
+			 <&tegra_car 101>, /* i2s3 */
+			 <&tegra_car 102>, /* i2s4 */
+			 <&tegra_car 108>, /* dam0 */
+			 <&tegra_car 109>, /* dam1 */
+			 <&tegra_car 110>, /* dam2 */
+			 <&tegra_car 10>;  /* spdif */
+		reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+			      "i2s3", "i2s4", "dam0", "dam1", "dam2",
+			      "spdif";
+		dmas = <&apbdma 1>, <&apbdma 1>,
+		       <&apbdma 2>, <&apbdma 2>,
+		       <&apbdma 3>, <&apbdma 3>,
+		       <&apbdma 4>, <&apbdma 4>;
+		dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+			    "rx3", "tx3";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		tegra_i2s0: i2s@70080300 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080300 0x100>;
+			nvidia,ahub-cif-ids = <4 4>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S0>;
+			resets = <&tegra_car 30>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s1: i2s@70080400 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080400 0x100>;
+			nvidia,ahub-cif-ids = <5 5>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S1>;
+			resets = <&tegra_car 11>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s2: i2s@70080500 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080500 0x100>;
+			nvidia,ahub-cif-ids = <6 6>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S2>;
+			resets = <&tegra_car 18>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s3: i2s@70080600 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080600 0x100>;
+			nvidia,ahub-cif-ids = <7 7>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S3>;
+			resets = <&tegra_car 101>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+
+		tegra_i2s4: i2s@70080700 {
+			compatible = "nvidia,tegra30-i2s";
+			reg = <0x70080700 0x100>;
+			nvidia,ahub-cif-ids = <8 8>;
+			clocks = <&tegra_car TEGRA30_CLK_I2S4>;
+			resets = <&tegra_car 102>;
+			reset-names = "i2s";
+			status = "disabled";
+		};
+	};
+
+	sdhci@78000000 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
+		resets = <&tegra_car 14>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000200 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
+		resets = <&tegra_car 9>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000400 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		resets = <&tegra_car 69>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	sdhci@78000600 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
+		resets = <&tegra_car 15>;
+		reset-names = "sdhci";
+		status = "disabled";
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d000000 0x4000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>;
+		resets = <&tegra_car 22>;
+		reset-names = "usb";
+		nvidia,needs-double-reset;
+		nvidia,phy = <&phy1>;
+		status = "disabled";
+	};
+
+	phy1: usb-phy@7d000000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USBD>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 22>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <1>;
+		nvidia,xcvr-lsrslew = <1>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		nvidia,has-utmi-pad-registers;
+		status = "disabled";
+	};
+
+	usb@7d004000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d004000 0x4000>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>;
+		resets = <&tegra_car 58>;
+		reset-names = "usb";
+		nvidia,phy = <&phy2>;
+		status = "disabled";
+	};
+
+	phy2: usb-phy@7d004000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d004000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB2>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 58>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <9>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		status = "disabled";
+	};
+
+	usb@7d008000 {
+		compatible = "nvidia,tegra30-ehci", "usb-ehci";
+		reg = <0x7d008000 0x4000>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>;
+		resets = <&tegra_car 59>;
+		reset-names = "usb";
+		nvidia,phy = <&phy3>;
+		status = "disabled";
+	};
+
+	phy3: usb-phy@7d008000 {
+		compatible = "nvidia,tegra30-usb-phy";
+		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		phy_type = "utmi";
+		clocks = <&tegra_car TEGRA30_CLK_USB3>,
+			 <&tegra_car TEGRA30_CLK_PLL_U>,
+			 <&tegra_car TEGRA30_CLK_USBD>;
+		clock-names = "reg", "pll_u", "utmi-pads";
+		resets = <&tegra_car 59>, <&tegra_car 22>;
+		reset-names = "usb", "utmi-pads";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,idle-wait-delay = <17>;
+		nvidia,elastic-limit = <16>;
+		nvidia,term-range-adj = <6>;
+		nvidia,xcvr-setup = <51>;
+		nvidia.xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		nvidia,xcvr-hsslew = <32>;
+		nvidia,hssquelch-level = <2>;
+		nvidia,hsdiscon-level = <5>;
+		status = "disabled";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
diff --git a/src/arm/tps6507x.dtsi b/src/arm/tps6507x.dtsi
new file mode 100644
index 000000000000..4c326e591e5a
--- /dev/null
+++ b/src/arm/tps6507x.dtsi
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65070.pdf
+ */
+
+&tps {
+	compatible = "ti,tps6507x";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "VDCDC1";
+		};
+
+		vdcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "VDCDC2";
+		};
+
+		vdcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "VDCDC3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "LDO1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "LDO2";
+		};
+
+	};
+};
diff --git a/src/arm/tps65217.dtsi b/src/arm/tps65217.dtsi
new file mode 100644
index 000000000000..a63272422d76
--- /dev/null
+++ b/src/arm/tps65217.dtsi
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65217";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "dcdc1";
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "dcdc2";
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "dcdc3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "ldo1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "ldo2";
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "ldo3";
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "ldo4";
+		};
+	};
+};
diff --git a/src/arm/tps65910.dtsi b/src/arm/tps65910.dtsi
new file mode 100644
index 000000000000..b0ac6657a170
--- /dev/null
+++ b/src/arm/tps65910.dtsi
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65910.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65910";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vrtc_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "vrtc";
+		};
+
+		vio_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "vio";
+		};
+
+		vdd1_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "vdd1";
+		};
+
+		vdd2_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "vdd2";
+		};
+
+		vdd3_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "vdd3";
+		};
+
+		vdig1_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "vdig1";
+		};
+
+		vdig2_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "vdig2";
+		};
+
+		vpll_reg: regulator@7 {
+			reg = <7>;
+			regulator-compatible = "vpll";
+		};
+
+		vdac_reg: regulator@8 {
+			reg = <8>;
+			regulator-compatible = "vdac";
+		};
+
+		vaux1_reg: regulator@9 {
+			reg = <9>;
+			regulator-compatible = "vaux1";
+		};
+
+		vaux2_reg: regulator@10 {
+			reg = <10>;
+			regulator-compatible = "vaux2";
+		};
+
+		vaux33_reg: regulator@11 {
+			reg = <11>;
+			regulator-compatible = "vaux33";
+		};
+
+		vmmc_reg: regulator@12 {
+			reg = <12>;
+			regulator-compatible = "vmmc";
+		};
+
+		vbb_reg: regulator@13 {
+			reg = <13>;
+			regulator-compatible = "vbb";
+		};
+	};
+};
diff --git a/src/arm/twl4030.dtsi b/src/arm/twl4030.dtsi
new file mode 100644
index 000000000000..36ae9160b558
--- /dev/null
+++ b/src/arm/twl4030.dtsi
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ */
+&twl {
+	compatible = "ti,twl4030";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	charger: bci {
+		compatible = "ti,twl4030-bci";
+		interrupts = <9>, <2>;
+		bci3v1-supply = <&vusb3v1>;
+	};
+
+	watchdog {
+		compatible = "ti,twl4030-wdt";
+	};
+
+	vaux1: regulator-vaux1 {
+		compatible = "ti,twl4030-vaux1";
+	};
+
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl4030-vaux2";
+	};
+
+	vaux3: regulator-vaux3 {
+		compatible = "ti,twl4030-vaux3";
+	};
+
+	vaux4: regulator-vaux4 {
+		compatible = "ti,twl4030-vaux4";
+	};
+
+	vcc: regulator-vdd1 {
+		compatible = "ti,twl4030-vdd1";
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <1450000>;
+	};
+
+	vdac: regulator-vdac {
+		compatible = "ti,twl4030-vdac";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vio: regulator-vio {
+		compatible = "ti,twl4030-vio";
+	};
+
+	vintana1: regulator-vintana1 {
+		compatible = "ti,twl4030-vintana1";
+	};
+
+	vintana2: regulator-vintana2 {
+		compatible = "ti,twl4030-vintana2";
+	};
+
+	vintdig: regulator-vintdig {
+		compatible = "ti,twl4030-vintdig";
+	};
+
+	vmmc1: regulator-vmmc1 {
+		compatible = "ti,twl4030-vmmc1";
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <3150000>;
+	};
+
+	vmmc2: regulator-vmmc2 {
+		compatible = "ti,twl4030-vmmc2";
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <3150000>;
+	};
+
+	vusb1v5: regulator-vusb1v5 {
+		compatible = "ti,twl4030-vusb1v5";
+	};
+
+	vusb1v8: regulator-vusb1v8 {
+		compatible = "ti,twl4030-vusb1v8";
+	};
+
+	vusb3v1: regulator-vusb3v1 {
+		compatible = "ti,twl4030-vusb3v1";
+	};
+
+	vpll1: regulator-vpll1 {
+		compatible = "ti,twl4030-vpll1";
+	};
+
+	vpll2: regulator-vpll2 {
+		compatible = "ti,twl4030-vpll2";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vsim: regulator-vsim {
+		compatible = "ti,twl4030-vsim";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	twl_gpio: gpio {
+		compatible = "ti,twl4030-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	usb2_phy: twl4030-usb {
+		compatible = "ti,twl4030-usb";
+		interrupts = <10>, <4>;
+		usb1v5-supply = <&vusb1v5>;
+		usb1v8-supply = <&vusb1v8>;
+		usb3v1-supply = <&vusb3v1>;
+		usb_mode = <1>;
+		#phy-cells = <0>;
+	};
+
+	twl_pwm: pwm {
+		compatible = "ti,twl4030-pwm";
+		#pwm-cells = <2>;
+	};
+
+	twl_pwmled: pwmled {
+		compatible = "ti,twl4030-pwmled";
+		#pwm-cells = <2>;
+	};
+
+	twl_pwrbutton: pwrbutton {
+		compatible = "ti,twl4030-pwrbutton";
+		interrupts = <8>;
+	};
+
+	twl_keypad: keypad {
+		compatible = "ti,twl4030-keypad";
+		interrupts = <1>;
+		keypad,num-rows = <8>;
+		keypad,num-columns = <8>;
+	};
+
+	twl_madc: madc {
+		compatible = "ti,twl4030-madc";
+		interrupts = <3>;
+		#io-channel-cells = <1>;
+	};
+};
diff --git a/src/arm/twl4030_omap3.dtsi b/src/arm/twl4030_omap3.dtsi
new file mode 100644
index 000000000000..3537ae5b2146
--- /dev/null
+++ b/src/arm/twl4030_omap3.dtsi
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2013 Linaro, Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&twl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&twl4030_pins &twl4030_vpins>;
+};
+
+&omap3_pmx_core {
+	/*
+	 * On most OMAP3 platforms, the twl4030 IRQ line is connected
+	 * to the SYS_NIRQ line on OMAP.  Therefore, configure the
+	 * defaults for the SYS_NIRQ pin here.
+	 */
+	twl4030_pins: pinmux_twl4030_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+};
+
+/*
+ * If your board is not using the I2C4 pins with twl4030, then don't include
+ * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode
+ * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and
+ * sys_nvmode2 signaling.
+ */
+&omap3_pmx_wkup {
+	twl4030_vpins: pinmux_twl4030_vpins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0)		/* i2c4_scl.i2c4_scl */
+			OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0)		/* i2c4_sda.i2c4_sda */
+			OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0)	/* sys_clkreq.sys_clkreq */
+			OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0)	/* sys_off_mode.sys_off_mode */
+		>;
+	};
+};
diff --git a/src/arm/twl6030.dtsi b/src/arm/twl6030.dtsi
new file mode 100644
index 000000000000..55eb35f068fb
--- /dev/null
+++ b/src/arm/twl6030.dtsi
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ */
+&twl {
+	compatible = "ti,twl6030";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vaux1: regulator-vaux1 {
+		compatible = "ti,twl6030-vaux1";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vaux2: regulator-vaux2 {
+		compatible = "ti,twl6030-vaux2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	vaux3: regulator-vaux3 {
+		compatible = "ti,twl6030-vaux3";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vmmc: regulator-vmmc {
+		compatible = "ti,twl6030-vmmc";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	vpp: regulator-vpp {
+		compatible = "ti,twl6030-vpp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	vusim: regulator-vusim {
+		compatible = "ti,twl6030-vusim";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	vdac: regulator-vdac {
+		compatible = "ti,twl6030-vdac";
+	};
+
+	vana: regulator-vana {
+		compatible = "ti,twl6030-vana";
+	};
+
+	vcxio: regulator-vcxio {
+		compatible = "ti,twl6030-vcxio";
+		regulator-always-on;
+	};
+
+	vusb: regulator-vusb {
+		compatible = "ti,twl6030-vusb";
+	};
+
+	v1v8: regulator-v1v8 {
+		compatible = "ti,twl6030-v1v8";
+		regulator-always-on;
+	};
+
+	v2v1: regulator-v2v1 {
+		compatible = "ti,twl6030-v2v1";
+		regulator-always-on;
+	};
+
+	twl_usb_comparator: usb-comparator {
+		compatible = "ti,twl6030-usb";
+		interrupts = <4>, <10>;
+	};
+
+	twl_pwm: pwm {
+		/* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+		compatible = "ti,twl6030-pwm";
+		#pwm-cells = <2>;
+	};
+
+	twl_pwmled: pwmled {
+		/* provides one PWM (id 0 for Charging indicator LED) */
+		compatible = "ti,twl6030-pwmled";
+		#pwm-cells = <2>;
+	};
+};
diff --git a/src/arm/twl6030_omap4.dtsi b/src/arm/twl6030_omap4.dtsi
new file mode 100644
index 000000000000..a4fa5703c42b
--- /dev/null
+++ b/src/arm/twl6030_omap4.dtsi
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&twl {
+	/*
+	 * On most OMAP4 platforms, the twl6030 IRQ line is connected
+	 * to the SYS_NIRQ1 line on OMAP and the twl6030 MSECURE line is
+	 * connected to the fref_clk0_out.sys_drm_msecure line.
+	 * Therefore, configure the defaults for the SYS_NIRQ1 and
+	 * fref_clk0_out.sys_drm_msecure pins here.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&twl6030_pins
+		&twl6030_wkup_pins
+	>;
+};
+
+&omap4_pmx_wkup {
+	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+		pinctrl-single,pins = <
+			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
+		>;
+	};
+};
+
+&omap4_pmx_core {
+	twl6030_pins: pinmux_twl6030_pins {
+		pinctrl-single,pins = <
+			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
+		>;
+	};
+};
diff --git a/src/arm/usb_a9g20-dab-mmx.dtsi b/src/arm/usb_a9g20-dab-mmx.dtsi
new file mode 100644
index 000000000000..5b0ffc1a0b24
--- /dev/null
+++ b/src/arm/usb_a9g20-dab-mmx.dtsi
@@ -0,0 +1,96 @@
+/*
+ * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/ {
+	ahb {
+		apb {
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+		};
+	};
+
+	i2c-gpio@0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led1 {
+			label = "user_led1";
+			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
+		};
+
+/*
+* led already used by mother board but active as high
+*		user_led2 {
+*			label = "user_led2";
+*			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
+*		};
+*/
+		user_led3 {
+			label = "user_led3";
+			gpios = <&pioB 22 GPIO_ACTIVE_LOW>;
+		};
+
+		user_led4 {
+			label = "user_led4";
+			gpios = <&pioB 23 GPIO_ACTIVE_LOW>;
+		};
+
+		red {
+			label = "red";
+			gpios = <&pioB 24 GPIO_ACTIVE_LOW>;
+		};
+
+		orange {
+			label = "orange";
+			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb1 {
+			label = "user_pb1";
+			gpios = <&pioB 25 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+		};
+
+		user_pb2 {
+			label = "user_pb2";
+			gpios = <&pioB 13 GPIO_ACTIVE_LOW>;
+			linux,code = <0x101>;
+		};
+
+		user_pb3 {
+			label = "user_pb3";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+		};
+
+		user_pb4 {
+			label = "user_pb4";
+			gpios = <&pioC 9 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+		};
+	};
+};
diff --git a/src/arm/versatile-ab.dts b/src/arm/versatile-ab.dts
new file mode 100644
index 000000000000..01f40197ea13
--- /dev/null
+++ b/src/arm/versatile-ab.dts
@@ -0,0 +1,292 @@
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "ARM Versatile AB";
+	compatible = "arm,versatile-ab";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		i2c0 = &i2c0;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		reg = <0x0 0x08000000>;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	core-module@10000000 {
+		compatible = "arm,core-module-versatile", "syscon";
+		reg = <0x10000000 0x200>;
+
+		/* OSC1 on AB, OSC4 on PB */
+		osc1: cm_aux_osc@24M {
+			#clock-cells = <0>;
+			compatible = "arm,versatile-cm-auxosc";
+			clocks = <&xtal24mhz>;
+		};
+
+		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
+		timclk: timclk@1M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <24>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+
+		pclk: pclk@24M {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clock-div = <1>;
+			clock-mult = <1>;
+			clocks = <&xtal24mhz>;
+		};
+	};
+
+	flash@34000000 {
+		compatible = "arm,versatile-flash";
+		reg = <0x34000000 0x4000000>;
+		bank-width = <4>;
+	};
+
+	i2c0: i2c@10002000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "arm,versatile-i2c";
+		reg = <0x10002000 0x1000>;
+
+		rtc@68 {
+			compatible = "dallas,ds1338";
+			reg = <0x68>;
+		};
+	};
+
+	net@10010000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x10010000 0x10000>;
+		interrupts = <25>;
+	};
+
+	lcd@10008000 {
+		compatible = "arm,versatile-lcd";
+		reg = <0x10008000 0x1000>;
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vic: intc@10140000 {
+			compatible = "arm,versatile-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10140000 0x1000>;
+			clear-mask = <0xffffffff>;
+			valid-mask = <0xffffffff>;
+		};
+
+		sic: intc@10003000 {
+			compatible = "arm,versatile-sic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x10003000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <31>; /* Cascaded to vic */
+			clear-mask = <0xffffffff>;
+			valid-mask = <0xffc203f8>;
+		};
+
+		dma@10130000 {
+			compatible = "arm,pl081", "arm,primecell";
+			reg = <0x10130000 0x1000>;
+			interrupts = <17>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: uart@101f1000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f1000 0x1000>;
+			interrupts = <12>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart1: uart@101f2000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f2000 0x1000>;
+			interrupts = <13>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		uart2: uart@101f3000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x101f3000 0x1000>;
+			interrupts = <14>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		smc@10100000 {
+			compatible = "arm,primecell";
+			reg = <0x10100000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mpmc@10110000 {
+			compatible = "arm,primecell";
+			reg = <0x10110000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		display@10120000 {
+			compatible = "arm,pl110", "arm,primecell";
+			reg = <0x10120000 0x1000>;
+			interrupts = <16>;
+			clocks = <&osc1>, <&pclk>;
+			clock-names = "clcd", "apb_pclk";
+		};
+
+		sctl@101e0000 {
+			compatible = "arm,primecell";
+			reg = <0x101e0000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		watchdog@101e1000 {
+			compatible = "arm,primecell";
+			reg = <0x101e1000 0x1000>;
+			interrupts = <0>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer@101e2000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e2000 0x1000>;
+			interrupts = <4>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
+		};
+
+		timer@101e3000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x101e3000 0x1000>;
+			interrupts = <5>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0", "timer1", "apb_pclk";
+		};
+
+		gpio0: gpio@101e4000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e4000 0x1000>;
+			gpio-controller;
+			interrupts = <6>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@101e5000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e5000 0x1000>;
+			interrupts = <7>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc@101e8000 {
+			compatible = "arm,pl030", "arm,primecell";
+			reg = <0x101e8000 0x1000>;
+			interrupts = <10>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		sci@101f0000 {
+			compatible = "arm,primecell";
+			reg = <0x101f0000 0x1000>;
+			interrupts = <15>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		ssp@101f4000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x101f4000 0x1000>;
+			interrupts = <11>;
+			clocks = <&xtal24mhz>, <&pclk>;
+			clock-names = "SSPCLK", "apb_pclk";
+		};
+
+		fpga {
+			compatible = "arm,versatile-fpga", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x10000000 0x10000>;
+
+			sysreg@0 {
+				compatible = "arm,versatile-sysreg", "syscon";
+				reg = <0x00000 0x1000>;
+			};
+
+			aaci@4000 {
+				compatible = "arm,primecell";
+				reg = <0x4000 0x1000>;
+				interrupts = <24>;
+				clocks = <&pclk>;
+				clock-names = "apb_pclk";
+			};
+			mmc@5000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = < 0x5000 0x1000>;
+				interrupts-extended = <&vic 22 &sic 2>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+			kmi@6000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x6000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <3>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+			kmi@7000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x7000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <4>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+		};
+	};
+};
diff --git a/src/arm/versatile-pb.dts b/src/arm/versatile-pb.dts
new file mode 100644
index 000000000000..b83137f66034
--- /dev/null
+++ b/src/arm/versatile-pb.dts
@@ -0,0 +1,95 @@
+#include <versatile-ab.dts>
+
+/ {
+	model = "ARM Versatile PB";
+	compatible = "arm,versatile-pb";
+
+	amba {
+		gpio2: gpio@101e6000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e6000 0x1000>;
+			interrupts = <8>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@101e7000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x101e7000 0x1000>;
+			interrupts = <9>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		pci-controller@10001000 {
+			compatible = "arm,versatile-pci";
+			device_type = "pci";
+			reg = <0x10001000 0x1000
+			       0x41000000 0x10000
+			       0x42000000 0x100000>;
+			bus-range = <0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			ranges = <0x01000000 0 0x00000000 0x43000000 0 0x00010000   /* downstream I/O */
+				  0x02000000 0 0x50000000 0x50000000 0 0x10000000   /* non-prefetchable memory */
+				  0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
+
+			interrupt-map-mask = <0x1800 0 0 7>;
+			interrupt-map = <0x1800 0 0 1 &sic 28
+					 0x1800 0 0 2 &sic 29
+					 0x1800 0 0 3 &sic 30
+					 0x1800 0 0 4 &sic 27
+
+					 0x1000 0 0 1 &sic 27
+					 0x1000 0 0 2 &sic 28
+					 0x1000 0 0 3 &sic 29
+					 0x1000 0 0 4 &sic 30
+
+					 0x0800 0 0 1 &sic 30
+					 0x0800 0 0 2 &sic 27
+					 0x0800 0 0 3 &sic 28
+					 0x0800 0 0 4 &sic 29
+
+					 0x0000 0 0 1 &sic 29
+					 0x0000 0 0 2 &sic 30
+					 0x0000 0 0 3 &sic 27
+					 0x0000 0 0 4 &sic 28>;
+		};
+
+		fpga {
+			uart@9000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x9000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <6>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+			sci@a000 {
+				compatible = "arm,primecell";
+				reg = <0xa000 0x1000>;
+				interrupt-parent = <&sic>;
+				interrupts = <5>;
+				clocks = <&xtal24mhz>;
+				clock-names = "apb_pclk";
+			};
+			mmc@b000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0xb000 0x1000>;
+				interrupts-extended = <&vic 23 &sic 2>;
+				clocks = <&xtal24mhz>, <&pclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+		};
+	};
+};
diff --git a/src/arm/vexpress-v2m-rs1.dtsi b/src/arm/vexpress-v2m-rs1.dtsi
new file mode 100644
index 000000000000..2efb2058ba49
--- /dev/null
+++ b/src/arm/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,440 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+
+	motherboard {
+		model = "V2M-P1";
+		arm,hbi = <0x190>;
+		arm,vexpress,site = <0>;
+		arm,v2m-memory-map = "rs1";
+		compatible = "arm,vexpress,v2m-p1", "simple-bus";
+		#address-cells = <2>; /* SMB chipselect number and offset */
+		#size-cells = <1>;
+		#interrupt-cells = <1>;
+		ranges;
+
+		flash@0,00000000 {
+			compatible = "arm,vexpress-flash", "cfi-flash";
+			reg = <0 0x00000000 0x04000000>,
+			      <4 0x00000000 0x04000000>;
+			bank-width = <4>;
+		};
+
+		psram@1,00000000 {
+			compatible = "arm,vexpress-psram", "mtd-ram";
+			reg = <1 0x00000000 0x02000000>;
+			bank-width = <4>;
+		};
+
+		v2m_video_ram: vram@2,00000000 {
+			compatible = "arm,vexpress-vram";
+			reg = <2 0x00000000 0x00800000>;
+		};
+
+		ethernet@2,02000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <2 0x02000000 0x10000>;
+			interrupts = <15>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&v2m_fixed_3v3>;
+			vddvario-supply = <&v2m_fixed_3v3>;
+		};
+
+		usb@2,03000000 {
+			compatible = "nxp,usb-isp1761";
+			reg = <2 0x03000000 0x20000>;
+			interrupts = <16>;
+			port1-otg;
+		};
+
+		iofpga@3,00000000 {
+			compatible = "arm,amba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 3 0 0x200000>;
+
+			v2m_sysreg: sysreg@010000 {
+				compatible = "arm,vexpress-sysreg";
+				reg = <0x010000 0x1000>;
+
+				v2m_led_gpios: sys_led@08 {
+					compatible = "arm,vexpress-sysreg,sys_led";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_mmc_gpios: sys_mci@48 {
+					compatible = "arm,vexpress-sysreg,sys_mci";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_flash_gpios: sys_flash@4c {
+					compatible = "arm,vexpress-sysreg,sys_flash";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+
+			v2m_sysctl: sysctl@020000 {
+				compatible = "arm,sp810", "arm,primecell";
+				reg = <0x020000 0x1000>;
+				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+				clock-names = "refclk", "timclk", "apb_pclk";
+				#clock-cells = <1>;
+				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+			};
+
+			/* PCI-E I2C bus */
+			v2m_i2c_pcie: i2c@030000 {
+				compatible = "arm,versatile-i2c";
+				reg = <0x030000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pcie-switch@60 {
+					compatible = "idt,89hpes32h8";
+					reg = <0x60>;
+				};
+			};
+
+			aaci@040000 {
+				compatible = "arm,pl041", "arm,primecell";
+				reg = <0x040000 0x1000>;
+				interrupts = <11>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
+			};
+
+			mmci@050000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x050000 0x1000>;
+				interrupts = <9 10>;
+				cd-gpios = <&v2m_mmc_gpios 0 0>;
+				wp-gpios = <&v2m_mmc_gpios 1 0>;
+				max-frequency = <12000000>;
+				vmmc-supply = <&v2m_fixed_3v3>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+
+			kmi@060000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x060000 0x1000>;
+				interrupts = <12>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			kmi@070000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x070000 0x1000>;
+				interrupts = <13>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			v2m_serial0: uart@090000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x090000 0x1000>;
+				interrupts = <5>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial1: uart@0a0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0a0000 0x1000>;
+				interrupts = <6>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial2: uart@0b0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0b0000 0x1000>;
+				interrupts = <7>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial3: uart@0c0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0c0000 0x1000>;
+				interrupts = <8>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			wdt@0f0000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0x0f0000 0x1000>;
+				interrupts = <0>;
+				clocks = <&v2m_refclk32khz>, <&smbclk>;
+				clock-names = "wdogclk", "apb_pclk";
+			};
+
+			v2m_timer01: timer@110000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x110000 0x1000>;
+				interrupts = <2>;
+				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			v2m_timer23: timer@120000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x120000 0x1000>;
+				interrupts = <3>;
+				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			/* DVI I2C bus */
+			v2m_i2c_dvi: i2c@160000 {
+				compatible = "arm,versatile-i2c";
+				reg = <0x160000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dvi-transmitter@39 {
+					compatible = "sil,sii9022-tpi", "sil,sii9022";
+					reg = <0x39>;
+				};
+
+				dvi-transmitter@60 {
+					compatible = "sil,sii9022-cpi", "sil,sii9022";
+					reg = <0x60>;
+				};
+			};
+
+			rtc@170000 {
+				compatible = "arm,pl031", "arm,primecell";
+				reg = <0x170000 0x1000>;
+				interrupts = <4>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
+			};
+
+			compact-flash@1a0000 {
+				compatible = "arm,vexpress-cf", "ata-generic";
+				reg = <0x1a0000 0x100
+				       0x1a0100 0xf00>;
+				reg-shift = <2>;
+			};
+
+			clcd@1f0000 {
+				compatible = "arm,pl111", "arm,primecell";
+				reg = <0x1f0000 0x1000>;
+				interrupt-names = "combined";
+				interrupts = <14>;
+				clocks = <&v2m_oscclk1>, <&smbclk>;
+				clock-names = "clcdclk", "apb_pclk";
+				memory-region = <&v2m_video_ram>;
+				max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
+
+				port {
+					v2m_clcd_pads: endpoint {
+						remote-endpoint = <&v2m_clcd_panel>;
+						arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+					};
+				};
+
+				panel {
+					compatible = "panel-dpi";
+
+					port {
+						v2m_clcd_panel: endpoint {
+							remote-endpoint = <&v2m_clcd_pads>;
+						};
+					};
+
+					panel-timing {
+						clock-frequency = <25175000>;
+						hactive = <640>;
+						hback-porch = <40>;
+						hfront-porch = <24>;
+						hsync-len = <96>;
+						vactive = <480>;
+						vback-porch = <32>;
+						vfront-porch = <11>;
+						vsync-len = <2>;
+					};
+				};
+			};
+		};
+
+		v2m_fixed_3v3: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		v2m_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "v2m:clk24mhz";
+		};
+
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "v2m:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "v2m:refclk32khz";
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			user@1 {
+				label = "v2m:green:user1";
+				gpios = <&v2m_led_gpios 0 0>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			user@2 {
+				label = "v2m:green:user2";
+				gpios = <&v2m_led_gpios 1 0>;
+				linux,default-trigger = "mmc0";
+			};
+
+			user@3 {
+				label = "v2m:green:user3";
+				gpios = <&v2m_led_gpios 2 0>;
+				linux,default-trigger = "cpu0";
+			};
+
+			user@4 {
+				label = "v2m:green:user4";
+				gpios = <&v2m_led_gpios 3 0>;
+				linux,default-trigger = "cpu1";
+			};
+
+			user@5 {
+				label = "v2m:green:user5";
+				gpios = <&v2m_led_gpios 4 0>;
+				linux,default-trigger = "cpu2";
+			};
+
+			user@6 {
+				label = "v2m:green:user6";
+				gpios = <&v2m_led_gpios 5 0>;
+				linux,default-trigger = "cpu3";
+			};
+
+			user@7 {
+				label = "v2m:green:user7";
+				gpios = <&v2m_led_gpios 6 0>;
+				linux,default-trigger = "cpu4";
+			};
+
+			user@8 {
+				label = "v2m:green:user8";
+				gpios = <&v2m_led_gpios 7 0>;
+				linux,default-trigger = "cpu5";
+			};
+		};
+
+		mcc {
+			compatible = "arm,vexpress,config-bus";
+			arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+			osc@0 {
+				/* MCC static memory clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 0>;
+				freq-range = <25000000 60000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk0";
+			};
+
+			v2m_oscclk1: osc@1 {
+				/* CLCD clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 1>;
+				freq-range = <23750000 65000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk1";
+			};
+
+			v2m_oscclk2: osc@2 {
+				/* IO FPGA peripheral clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 2>;
+				freq-range = <24000000 24000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk2";
+			};
+
+			volt@0 {
+				/* Logic level voltage */
+				compatible = "arm,vexpress-volt";
+				arm,vexpress-sysreg,func = <2 0>;
+				regulator-name = "VIO";
+				regulator-always-on;
+				label = "VIO";
+			};
+
+			temp@0 {
+				/* MCC internal operating temperature */
+				compatible = "arm,vexpress-temp";
+				arm,vexpress-sysreg,func = <4 0>;
+				label = "MCC";
+			};
+
+			reset@0 {
+				compatible = "arm,vexpress-reset";
+				arm,vexpress-sysreg,func = <5 0>;
+			};
+
+			muxfpga@0 {
+				compatible = "arm,vexpress-muxfpga";
+				arm,vexpress-sysreg,func = <7 0>;
+			};
+
+			shutdown@0 {
+				compatible = "arm,vexpress-shutdown";
+				arm,vexpress-sysreg,func = <8 0>;
+			};
+
+			reboot@0 {
+				compatible = "arm,vexpress-reboot";
+				arm,vexpress-sysreg,func = <9 0>;
+			};
+
+			dvimode@0 {
+				compatible = "arm,vexpress-dvimode";
+				arm,vexpress-sysreg,func = <11 0>;
+			};
+		};
+	};
diff --git a/src/arm/vexpress-v2m.dtsi b/src/arm/vexpress-v2m.dtsi
new file mode 100644
index 000000000000..cb3090f919a7
--- /dev/null
+++ b/src/arm/vexpress-v2m.dtsi
@@ -0,0 +1,439 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * Original memory map ("Legacy memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m-rs1.dtsi!
+ */
+
+	motherboard {
+		model = "V2M-P1";
+		arm,hbi = <0x190>;
+		arm,vexpress,site = <0>;
+		compatible = "arm,vexpress,v2m-p1", "simple-bus";
+		#address-cells = <2>; /* SMB chipselect number and offset */
+		#size-cells = <1>;
+		#interrupt-cells = <1>;
+		ranges;
+
+		flash@0,00000000 {
+			compatible = "arm,vexpress-flash", "cfi-flash";
+			reg = <0 0x00000000 0x04000000>,
+			      <1 0x00000000 0x04000000>;
+			bank-width = <4>;
+		};
+
+		psram@2,00000000 {
+			compatible = "arm,vexpress-psram", "mtd-ram";
+			reg = <2 0x00000000 0x02000000>;
+			bank-width = <4>;
+		};
+
+		v2m_video_ram: vram@3,00000000 {
+			compatible = "arm,vexpress-vram";
+			reg = <3 0x00000000 0x00800000>;
+		};
+
+		ethernet@3,02000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <3 0x02000000 0x10000>;
+			interrupts = <15>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&v2m_fixed_3v3>;
+			vddvario-supply = <&v2m_fixed_3v3>;
+		};
+
+		usb@3,03000000 {
+			compatible = "nxp,usb-isp1761";
+			reg = <3 0x03000000 0x20000>;
+			interrupts = <16>;
+			port1-otg;
+		};
+
+		iofpga@7,00000000 {
+			compatible = "arm,amba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 7 0 0x20000>;
+
+			v2m_sysreg: sysreg@00000 {
+				compatible = "arm,vexpress-sysreg";
+				reg = <0x00000 0x1000>;
+
+				v2m_led_gpios: sys_led@08 {
+					compatible = "arm,vexpress-sysreg,sys_led";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_mmc_gpios: sys_mci@48 {
+					compatible = "arm,vexpress-sysreg,sys_mci";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+
+				v2m_flash_gpios: sys_flash@4c {
+					compatible = "arm,vexpress-sysreg,sys_flash";
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+
+			v2m_sysctl: sysctl@01000 {
+				compatible = "arm,sp810", "arm,primecell";
+				reg = <0x01000 0x1000>;
+				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+				clock-names = "refclk", "timclk", "apb_pclk";
+				#clock-cells = <1>;
+				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+			};
+
+			/* PCI-E I2C bus */
+			v2m_i2c_pcie: i2c@02000 {
+				compatible = "arm,versatile-i2c";
+				reg = <0x02000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pcie-switch@60 {
+					compatible = "idt,89hpes32h8";
+					reg = <0x60>;
+				};
+			};
+
+			aaci@04000 {
+				compatible = "arm,pl041", "arm,primecell";
+				reg = <0x04000 0x1000>;
+				interrupts = <11>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
+			};
+
+			mmci@05000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x05000 0x1000>;
+				interrupts = <9 10>;
+				cd-gpios = <&v2m_mmc_gpios 0 0>;
+				wp-gpios = <&v2m_mmc_gpios 1 0>;
+				max-frequency = <12000000>;
+				vmmc-supply = <&v2m_fixed_3v3>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "mclk", "apb_pclk";
+			};
+
+			kmi@06000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x06000 0x1000>;
+				interrupts = <12>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			kmi@07000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x07000 0x1000>;
+				interrupts = <13>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			v2m_serial0: uart@09000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x09000 0x1000>;
+				interrupts = <5>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial1: uart@0a000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0a000 0x1000>;
+				interrupts = <6>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial2: uart@0b000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0b000 0x1000>;
+				interrupts = <7>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial3: uart@0c000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0c000 0x1000>;
+				interrupts = <8>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			wdt@0f000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0x0f000 0x1000>;
+				interrupts = <0>;
+				clocks = <&v2m_refclk32khz>, <&smbclk>;
+				clock-names = "wdogclk", "apb_pclk";
+			};
+
+			v2m_timer01: timer@11000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x11000 0x1000>;
+				interrupts = <2>;
+				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			v2m_timer23: timer@12000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x12000 0x1000>;
+				interrupts = <3>;
+				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			/* DVI I2C bus */
+			v2m_i2c_dvi: i2c@16000 {
+				compatible = "arm,versatile-i2c";
+				reg = <0x16000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dvi-transmitter@39 {
+					compatible = "sil,sii9022-tpi", "sil,sii9022";
+					reg = <0x39>;
+				};
+
+				dvi-transmitter@60 {
+					compatible = "sil,sii9022-cpi", "sil,sii9022";
+					reg = <0x60>;
+				};
+			};
+
+			rtc@17000 {
+				compatible = "arm,pl031", "arm,primecell";
+				reg = <0x17000 0x1000>;
+				interrupts = <4>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
+			};
+
+			compact-flash@1a000 {
+				compatible = "arm,vexpress-cf", "ata-generic";
+				reg = <0x1a000 0x100
+				       0x1a100 0xf00>;
+				reg-shift = <2>;
+			};
+
+			clcd@1f000 {
+				compatible = "arm,pl111", "arm,primecell";
+				reg = <0x1f000 0x1000>;
+				interrupt-names = "combined";
+				interrupts = <14>;
+				clocks = <&v2m_oscclk1>, <&smbclk>;
+				clock-names = "clcdclk", "apb_pclk";
+				memory-region = <&v2m_video_ram>;
+				max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
+
+				port {
+					v2m_clcd_pads: endpoint {
+						remote-endpoint = <&v2m_clcd_panel>;
+						arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+					};
+				};
+
+				panel {
+					compatible = "panel-dpi";
+
+					port {
+						v2m_clcd_panel: endpoint {
+							remote-endpoint = <&v2m_clcd_pads>;
+						};
+					};
+
+					panel-timing {
+						clock-frequency = <25175000>;
+						hactive = <640>;
+						hback-porch = <40>;
+						hfront-porch = <24>;
+						hsync-len = <96>;
+						vactive = <480>;
+						vback-porch = <32>;
+						vfront-porch = <11>;
+						vsync-len = <2>;
+					};
+				};
+			};
+		};
+
+		v2m_fixed_3v3: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		v2m_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "v2m:clk24mhz";
+		};
+
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "v2m:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "v2m:refclk32khz";
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			user@1 {
+				label = "v2m:green:user1";
+				gpios = <&v2m_led_gpios 0 0>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			user@2 {
+				label = "v2m:green:user2";
+				gpios = <&v2m_led_gpios 1 0>;
+				linux,default-trigger = "mmc0";
+			};
+
+			user@3 {
+				label = "v2m:green:user3";
+				gpios = <&v2m_led_gpios 2 0>;
+				linux,default-trigger = "cpu0";
+			};
+
+			user@4 {
+				label = "v2m:green:user4";
+				gpios = <&v2m_led_gpios 3 0>;
+				linux,default-trigger = "cpu1";
+			};
+
+			user@5 {
+				label = "v2m:green:user5";
+				gpios = <&v2m_led_gpios 4 0>;
+				linux,default-trigger = "cpu2";
+			};
+
+			user@6 {
+				label = "v2m:green:user6";
+				gpios = <&v2m_led_gpios 5 0>;
+				linux,default-trigger = "cpu3";
+			};
+
+			user@7 {
+				label = "v2m:green:user7";
+				gpios = <&v2m_led_gpios 6 0>;
+				linux,default-trigger = "cpu4";
+			};
+
+			user@8 {
+				label = "v2m:green:user8";
+				gpios = <&v2m_led_gpios 7 0>;
+				linux,default-trigger = "cpu5";
+			};
+		};
+
+		mcc {
+			compatible = "arm,vexpress,config-bus";
+			arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+			osc@0 {
+				/* MCC static memory clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 0>;
+				freq-range = <25000000 60000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk0";
+			};
+
+			v2m_oscclk1: osc@1 {
+				/* CLCD clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 1>;
+				freq-range = <23750000 65000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk1";
+			};
+
+			v2m_oscclk2: osc@2 {
+				/* IO FPGA peripheral clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 2>;
+				freq-range = <24000000 24000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk2";
+			};
+
+			volt@0 {
+				/* Logic level voltage */
+				compatible = "arm,vexpress-volt";
+				arm,vexpress-sysreg,func = <2 0>;
+				regulator-name = "VIO";
+				regulator-always-on;
+				label = "VIO";
+			};
+
+			temp@0 {
+				/* MCC internal operating temperature */
+				compatible = "arm,vexpress-temp";
+				arm,vexpress-sysreg,func = <4 0>;
+				label = "MCC";
+			};
+
+			reset@0 {
+				compatible = "arm,vexpress-reset";
+				arm,vexpress-sysreg,func = <5 0>;
+			};
+
+			muxfpga@0 {
+				compatible = "arm,vexpress-muxfpga";
+				arm,vexpress-sysreg,func = <7 0>;
+			};
+
+			shutdown@0 {
+				compatible = "arm,vexpress-shutdown";
+				arm,vexpress-sysreg,func = <8 0>;
+			};
+
+			reboot@0 {
+				compatible = "arm,vexpress-reboot";
+				arm,vexpress-sysreg,func = <9 0>;
+			};
+
+			dvimode@0 {
+				compatible = "arm,vexpress-dvimode";
+				arm,vexpress-sysreg,func = <11 0>;
+			};
+		};
+	};
diff --git a/src/arm/vexpress-v2p-ca15-tc1.dts b/src/arm/vexpress-v2p-ca15-tc1.dts
new file mode 100644
index 000000000000..9420053acc14
--- /dev/null
+++ b/src/arm/vexpress-v2p-ca15-tc1.dts
@@ -0,0 +1,283 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 (version with Test Chip 1)
+ * Cortex-A15 MPCore (V2P-CA15)
+ *
+ * HBI-0237A
+ */
+
+/dts-v1/;
+
+/ {
+	model = "V2P-CA15";
+	arm,hbi = <0x237>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	hdlcd@2b000000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x2b000000 0 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&oscclk5>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2b0a0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&oscclk7>;
+		clock-names = "apb_pclk";
+	};
+
+	wdt@2b060000 {
+		compatible = "arm,sp805", "arm,primecell";
+		status = "disabled";
+		reg = <0 0x2b060000 0 0x1000>;
+		interrupts = <0 98 4>;
+		clocks = <&oscclk7>;
+		clock-names = "apb_pclk";
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x1000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&oscclk7>;
+		clock-names = "apb_pclk";
+	};
+
+	dma@7ffb0000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0 0x7ffb0000 0 0x1000>;
+		interrupts = <0 92 4>,
+			     <0 88 4>,
+			     <0 89 4>,
+			     <0 90 4>,
+			     <0 91 4>;
+		clocks = <&oscclk7>;
+		clock-names = "apb_pclk";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		osc@0 {
+			/* CPU PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		osc@4 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		oscclk5: osc@5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: osc@6 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		oscclk7: osc@7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <20000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		osc@8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <40000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		volt@0 {
+			/* CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "Cores";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "Cores";
+		};
+
+		amp@0 {
+			/* Total current for the two cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "Cores";
+		};
+
+		temp@0 {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power@0 {
+			/* Total power */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "Cores";
+		};
+
+		energy@0 {
+			/* Total energy */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>;
+			label = "Cores";
+		};
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+
+		/include/ "vexpress-v2m-rs1.dtsi"
+	};
+};
diff --git a/src/arm/vexpress-v2p-ca15_a7.dts b/src/arm/vexpress-v2p-ca15_a7.dts
new file mode 100644
index 000000000000..33920df03640
--- /dev/null
+++ b/src/arm/vexpress-v2p-ca15_a7.dts
@@ -0,0 +1,620 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A15x2 A7x3
+ * Cortex-A15_A7 MPCore (V2P-CA15_A7)
+ *
+ * HBI-0249A
+ */
+
+/dts-v1/;
+
+/ {
+	model = "V2P-CA15_CA7";
+	arm,hbi = <0x249>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			cci-control-port = <&cci_control1>;
+			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			cci-control-port = <&cci_control1>;
+			cpu-idle-states = <&CLUSTER_SLEEP_BIG>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+		};
+
+		cpu4: cpu@4 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control2>;
+			cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>;
+		};
+
+		idle-states {
+			CLUSTER_SLEEP_BIG: cluster-sleep-big {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <700>;
+				min-residency-us = <2000>;
+			};
+
+			CLUSTER_SLEEP_LITTLE: cluster-sleep-little {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				entry-latency-us = <1000>;
+				exit-latency-us = <500>;
+				min-residency-us = <2500>;
+			};
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	wdt@2a490000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0 0x2a490000 0 0x1000>;
+		interrupts = <0 98 4>;
+		clocks = <&oscclk6a>, <&oscclk6a>;
+		clock-names = "wdogclk", "apb_pclk";
+	};
+
+	hdlcd@2b000000 {
+		compatible = "arm,hdlcd";
+		reg = <0 0x2b000000 0 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&oscclk5>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2b0a0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x1000>,
+		      <0 0x2c004000 0 0x2000>,
+		      <0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	cci@2c090000 {
+		compatible = "arm,cci-400";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0x2c090000 0 0x1000>;
+		ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+		cci_control1: slave-if@4000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2: slave-if@5000 {
+			compatible = "arm,cci-400-ctrl-if";
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+	dma@7ff00000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0 0x7ff00000 0 0x1000>;
+		interrupts = <0 92 4>,
+			     <0 88 4>,
+			     <0 89 4>,
+			     <0 90 4>,
+			     <0 91 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+	};
+
+        scc@7fff0000 {
+		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+		reg = <0 0x7fff0000 0 0x1000>;
+		interrupts = <0 95 4>;
+        };
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	oscclk6a: oscclk6a {
+		/* Reference 24MHz clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "oscclk6a";
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		osc@0 {
+			/* A15 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		osc@1 {
+			/* A15 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		osc@2 {
+			/* A7 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		osc@3 {
+			/* A7 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		osc@4 {
+			/* External AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		oscclk5: osc@5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: osc@6 {
+			/* Static memory controller clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		osc@7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		osc@8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		volt@0 {
+			/* A15 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "A15 Vcore";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "A15 Vcore";
+		};
+
+		volt@1 {
+			/* A7 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "A7 Vcore";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			label = "A7 Vcore";
+		};
+
+		amp@0 {
+			/* Total current for the two A15 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "A15 Icore";
+		};
+
+		amp@1 {
+			/* Total current for the three A7 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "A7 Icore";
+		};
+
+		temp@0 {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power@0 {
+			/* Total power for the two A15 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "A15 Pcore";
+		};
+
+		power@1 {
+			/* Total power for the three A7 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "A7 Pcore";
+		};
+
+		energy@0 {
+			/* Total energy for the two A15 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>, <13 1>;
+			label = "A15 Jcore";
+		};
+
+		energy@2 {
+			/* Total energy for the three A7 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 2>, <13 3>;
+			label = "A7 Jcore";
+		};
+	};
+
+	etb@0,20010000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0x20010000 0 0x1000>;
+
+		coresight-default-sink;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			etb_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port0>;
+			};
+		};
+	};
+
+	tpiu@0,20030000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0x20030000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			tpiu_in_port: endpoint@0 {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	replicator {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&etb_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&funnel_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@0,20040000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0 0x20040000 0 0x1000>;
+
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel output port */
+			port@0 {
+				reg = <0>;
+				funnel_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator_in_port0>;
+				};
+			};
+
+			/* funnel input ports */
+			port@1 {
+				reg = <0>;
+				funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <1>;
+				funnel_in_port1: endpoint {
+					slave-mode;
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <2>;
+				funnel_in_port2: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			/* Input port #3 is for ITM, not supported here */
+
+			port@4 {
+				reg = <4>;
+				funnel_in_port4: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm1_out_port>;
+				};
+			};
+
+			port@5 {
+				reg = <5>;
+				funnel_in_port5: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm2_out_port>;
+				};
+			};
+		};
+	};
+
+	ptm@0,2201c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201c000 0 0x1000>;
+
+		cpu = <&cpu0>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			ptm0_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port0>;
+			};
+		};
+	};
+
+	ptm@0,2201d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2201d000 0 0x1000>;
+
+		cpu = <&cpu1>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			ptm1_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port1>;
+			};
+		};
+	};
+
+	etm@0,2203c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203c000 0 0x1000>;
+
+		cpu = <&cpu2>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			etm0_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port2>;
+			};
+		};
+	};
+
+	etm@0,2203d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203d000 0 0x1000>;
+
+		cpu = <&cpu3>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			etm1_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port4>;
+			};
+		};
+	};
+
+	etm@0,2203e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0x2203e000 0 0x1000>;
+
+		cpu = <&cpu4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
+		port {
+			etm2_out_port: endpoint {
+				remote-endpoint = <&funnel_in_port5>;
+			};
+		};
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+
+		/include/ "vexpress-v2m-rs1.dtsi"
+	};
+};
diff --git a/src/arm/vexpress-v2p-ca5s.dts b/src/arm/vexpress-v2p-ca5s.dts
new file mode 100644
index 000000000000..d2709b73316b
--- /dev/null
+++ b/src/arm/vexpress-v2p-ca5s.dts
@@ -0,0 +1,253 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A5x2
+ * Cortex-A5 MPCore (V2P-CA5s)
+ *
+ * HBI-0225B
+ */
+
+/dts-v1/;
+
+/ {
+	model = "V2P-CA5s";
+	arm,hbi = <0x225>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	hdlcd@2a110000 {
+		compatible = "arm,hdlcd";
+		reg = <0x2a110000 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&oscclk3>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2a150000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x2a150000 0x1000>;
+		clocks = <&oscclk1>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@2a190000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x2a190000 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&oscclk1>;
+		clock-names = "apb_pclk";
+	};
+
+	scu@2c000000 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x2c000000 0x58>;
+	};
+
+	timer@2c000600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x2c000600 0x20>;
+		interrupts = <1 13 0x304>;
+	};
+
+	timer@2c000200 {
+		compatible = "arm,cortex-a5-global-timer",
+		             "arm,cortex-a9-global-timer";
+		reg = <0x2c000200 0x20>;
+		interrupts = <1 11 0x304>;
+		clocks = <&oscclk0>;
+	};
+
+	watchdog@2c000620 {
+		compatible = "arm,cortex-a5-twd-wdt";
+		reg = <0x2c000620 0x20>;
+		interrupts = <1 14 0x304>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x2c001000 0x1000>,
+		      <0x2c000100 0x100>;
+	};
+
+	L2: cache-controller@2c0f0000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x2c0f0000 0x1000>;
+		interrupts = <0 84 4>;
+		cache-level = <2>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0: osc@0 {
+			/* CPU and internal AXI reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		oscclk1: osc@1 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <5000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		osc@2 {
+			/* DDR2 */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <80000000 120000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		oscclk3: osc@3 {
+			/* HDLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		osc@4 {
+			/* Test chip gate configuration */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <80000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		smbclk: osc@5 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <25000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		temp@0 {
+			/* DCC internal operating temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x08000000 0x04000000>,
+			 <1 0 0x14000000 0x04000000>,
+			 <2 0 0x18000000 0x04000000>,
+			 <3 0 0x1c000000 0x04000000>,
+			 <4 0 0x0c000000 0x04000000>,
+			 <5 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+
+		/include/ "vexpress-v2m-rs1.dtsi"
+	};
+};
diff --git a/src/arm/vexpress-v2p-ca9.dts b/src/arm/vexpress-v2p-ca9.dts
new file mode 100644
index 000000000000..23662b5a5e9d
--- /dev/null
+++ b/src/arm/vexpress-v2p-ca9.dts
@@ -0,0 +1,359 @@
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A9x4
+ * Cortex-A9 MPCore (V2P-CA9)
+ *
+ * HBI-0191B
+ */
+
+/dts-v1/;
+
+/ {
+	model = "V2P-CA9";
+	arm,hbi = <0x191>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	clcd@10020000 {
+		compatible = "arm,pl111", "arm,primecell";
+		reg = <0x10020000 0x1000>;
+		interrupt-names = "combined";
+		interrupts = <0 44 4>;
+		clocks = <&oscclk1>, <&oscclk2>;
+		clock-names = "clcdclk", "apb_pclk";
+		max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+
+		port {
+			clcd_pads: endpoint {
+				remote-endpoint = <&clcd_panel>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+
+		panel {
+			compatible = "panel-dpi";
+
+			port {
+				clcd_panel: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			panel-timing {
+				clock-frequency = <63500127>;
+				hactive = <1024>;
+				hback-porch = <152>;
+				hfront-porch = <48>;
+				hsync-len = <104>;
+				vactive = <768>;
+				vback-porch = <23>;
+				vfront-porch = <3>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	memory-controller@100e0000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x100e0000 0x1000>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@100e1000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x100e1000 0x1000>;
+		interrupts = <0 45 4>,
+			     <0 46 4>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
+	};
+
+	timer@100e4000 {
+		compatible = "arm,sp804", "arm,primecell";
+		reg = <0x100e4000 0x1000>;
+		interrupts = <0 48 4>,
+			     <0 49 4>;
+		clocks = <&oscclk2>, <&oscclk2>;
+		clock-names = "timclk", "apb_pclk";
+		status = "disabled";
+	};
+
+	watchdog@100e5000 {
+		compatible = "arm,sp805", "arm,primecell";
+		reg = <0x100e5000 0x1000>;
+		interrupts = <0 51 4>;
+		clocks = <&oscclk2>, <&oscclk2>;
+		clock-names = "wdogclk", "apb_pclk";
+	};
+
+	scu@1e000000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1e000000 0x58>;
+	};
+
+	timer@1e000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1e000600 0x20>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1e000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1e000620 0x20>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	gic: interrupt-controller@1e001000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x1e001000 0x1000>,
+		      <0x1e000100 0x100>;
+	};
+
+	L2: cache-controller@1e00a000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x1e00a000 0x1000>;
+		interrupts = <0 43 4>;
+		cache-level = <2>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		osc@0 {
+			/* ACLK clock to the AXI master port on the test chip */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <30000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "extsaxiclk";
+		};
+
+		oscclk1: osc@1 {
+			/* Reference clock for the CLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <10000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "clcdclk";
+		};
+
+		smbclk: oscclk2: osc@2 {
+			/* Reference clock for the test chip internal PLLs */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <33000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "tcrefclk";
+		};
+
+		volt@0 {
+			/* Test Chip internal logic voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VD10";
+			regulator-always-on;
+			label = "VD10";
+		};
+
+		volt@1 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "VD10_S2";
+			regulator-always-on;
+			label = "VD10_S2";
+		};
+
+		volt@2 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 2>;
+			regulator-name = "VD10_S3";
+			regulator-always-on;
+			label = "VD10_S3";
+		};
+
+		volt@3 {
+			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 3>;
+			regulator-name = "VCC1V8";
+			regulator-always-on;
+			label = "VCC1V8";
+		};
+
+		volt@4 {
+			/* DDR2 SDRAM VTT termination voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 4>;
+			regulator-name = "DDR2VTT";
+			regulator-always-on;
+			label = "DDR2VTT";
+		};
+
+		volt@5 {
+			/* Local board supply for miscellaneous logic external to the Test Chip */
+			arm,vexpress-sysreg,func = <2 5>;
+			compatible = "arm,vexpress-volt";
+			regulator-name = "VCC3V3";
+			regulator-always-on;
+			label = "VCC3V3";
+		};
+
+		amp@0 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "VD10_S2";
+		};
+
+		amp@1 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "VD10_S3";
+		};
+
+		power@0 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "PVD10_S2";
+		};
+
+		power@1 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "PVD10_S3";
+		};
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0x40000000 0x04000000>,
+			 <1 0 0x44000000 0x04000000>,
+			 <2 0 0x48000000 0x04000000>,
+			 <3 0 0x4c000000 0x04000000>,
+			 <7 0 0x10000000 0x00020000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+
+		/include/ "vexpress-v2m.dtsi"
+	};
+};
diff --git a/src/arm/vf-colibri-eval-v3.dtsi b/src/arm/vf-colibri-eval-v3.dtsi
new file mode 100644
index 000000000000..36cafbfa1bfa
--- /dev/null
+++ b/src/arm/vf-colibri-eval-v3.dtsi
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/ {
+	chosen {
+		bootargs = "console=ttyLP0,115200";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sys_5v0_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "5v0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		/* USBH_PEN */
+		usbh_vbus_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1_reg>;
+			reg = <1>;
+			regulator-name = "usbh_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio2 19 GPIO_ACTIVE_LOW>;
+			vin-supply = <&sys_5v0_reg>;
+		};
+	};
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	status  = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&usbh_vbus_reg>;
+};
diff --git a/src/arm/vf-colibri.dtsi b/src/arm/vf-colibri.dtsi
new file mode 100644
index 000000000000..5c2b7320856d
--- /dev/null
+++ b/src/arm/vf-colibri.dtsi
@@ -0,0 +1,187 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/ {
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 5000000 0>;
+		status = "disabled";
+	};
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_gpio_ext: gpio_ext {
+			fsl,pins = <
+				VF610_PAD_PTD10__GPIO_89	0x22ed /* EXT_IO_0 */
+				VF610_PAD_PTD9__GPIO_88		0x22ed /* EXT_IO_1 */
+				VF610_PAD_PTD26__GPIO_68	0x22ed /* EXT_IO_2 */
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB20__GPIO_42	0x219d
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTA6__RMII_CLKOUT		0x30d2
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_i2c0: i2c0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__I2C0_SCL		0x37ff
+				VF610_PAD_PTB15__I2C0_SDA		0x37ff
+			>;
+		};
+
+		pinctrl_pwm0: pwm0grp {
+			fsl,pins = <
+				VF610_PAD_PTB0__FTM0_CH0		0x1182
+				VF610_PAD_PTB1__FTM0_CH1		0x1182
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				VF610_PAD_PTB8__FTM1_CH0		0x1182
+				VF610_PAD_PTB9__FTM1_CH1		0x1182
+			>;
+		};
+
+		pinctrl_uart0: uart0grp {
+			fsl,pins = <
+				VF610_PAD_PTB10__UART0_TX		0x21a2
+				VF610_PAD_PTB11__UART0_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTD0__UART2_TX		0x21a2
+				VF610_PAD_PTD1__UART2_RX		0x21a1
+				VF610_PAD_PTD2__UART2_RTS		0x21a2
+				VF610_PAD_PTD3__UART2_CTS		0x21a1
+			>;
+		};
+
+		pinctrl_usbh1_reg: gpio_usb_vbus {
+			fsl,pins = <
+				VF610_PAD_PTD4__GPIO_83			0x22ed
+			>;
+		};
+	};
+};
diff --git a/src/arm/vf500-colibri-eval-v3.dts b/src/arm/vf500-colibri-eval-v3.dts
new file mode 100644
index 000000000000..7fc782c4fc52
--- /dev/null
+++ b/src/arm/vf500-colibri-eval-v3.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf500-colibri.dtsi"
+#include "vf-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri VF50 on Colibri Evaluation Board";
+	compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
+};
diff --git a/src/arm/vf500-colibri.dtsi b/src/arm/vf500-colibri.dtsi
new file mode 100644
index 000000000000..cee34a32f25b
--- /dev/null
+++ b/src/arm/vf500-colibri.dtsi
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "vf500.dtsi"
+#include "vf-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri VF50 COM";
+	compatible = "toradex,vf610-colibri_vf50", "fsl,vf500";
+
+	memory {
+		reg = <0x80000000 0x8000000>;
+	};
+};
diff --git a/src/arm/vf500.dtsi b/src/arm/vf500.dtsi
new file mode 100644
index 000000000000..1dbf8d2d1ddf
--- /dev/null
+++ b/src/arm/vf500.dtsi
@@ -0,0 +1,184 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "skeleton.dtsi"
+#include "vfxxx.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		a5_cpu: cpu@0 {
+			compatible = "arm,cortex-a5";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	soc {
+		interrupt-parent = <&intc>;
+
+		aips-bus@40000000 {
+
+			intc: interrupt-controller@40002000 {
+				compatible = "arm,cortex-a9-gic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x40003000 0x1000>,
+				      <0x40002100 0x100>;
+			};
+
+			global_timer: timer@40002200 {
+				compatible = "arm,cortex-a9-global-timer";
+				reg = <0x40002200 0x20>;
+				interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks VF610_CLK_PLATFORM_BUS>;
+			};
+		};
+	};
+};
+
+&adc0 {
+	interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc1 {
+	interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&can0 {
+	interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&can1 {
+	interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&dspi0 {
+	interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&edma0 {
+	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "edma-tx", "edma-err";
+};
+
+&edma1 {
+	interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "edma-tx", "edma-err";
+};
+
+&esdhc1 {
+	interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&fec0 {
+	interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&fec1 {
+	interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ftm {
+	interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio3 {
+	interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio4 {
+	interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c0 {
+	interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pit {
+	interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&qspi0 {
+	interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai2 {
+	interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&snvsrtc {
+	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&src {
+	interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+	interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart1 {
+	interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart2 {
+	interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart3 {
+	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart4 {
+	interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart5 {
+	interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbdev0 {
+	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbh1 {
+	interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbphy0 {
+	interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbphy1 {
+	interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdoga5 {
+	interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
diff --git a/src/arm/vf610-colibri-eval-v3.dts b/src/arm/vf610-colibri-eval-v3.dts
new file mode 100644
index 000000000000..10ebe99e2751
--- /dev/null
+++ b/src/arm/vf610-colibri-eval-v3.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610-colibri.dtsi"
+#include "vf-colibri-eval-v3.dtsi"
+
+/ {
+	model = "Toradex Colibri VF61 on Colibri Evaluation Board";
+	compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610";
+};
\ No newline at end of file
diff --git a/src/arm/vf610-colibri.dtsi b/src/arm/vf610-colibri.dtsi
new file mode 100644
index 000000000000..19fe045b8334
--- /dev/null
+++ b/src/arm/vf610-colibri.dtsi
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "vf610.dtsi"
+#include "vf-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri VF61 COM";
+	compatible = "toradex,vf610-colibri_vf61", "fsl,vf610";
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&L2 {
+	arm,data-latency = <2 1 2>;
+	arm,tag-latency = <3 2 3>;
+};
diff --git a/src/arm/vf610-cosmic.dts b/src/arm/vf610-cosmic.dts
new file mode 100644
index 000000000000..fd8758b639f5
--- /dev/null
+++ b/src/arm/vf610-cosmic.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "PHYTEC Cosmic/Cosmic+ Board";
+	compatible = "phytec,vf610-cosmic", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+
+	enet_ext: enet_ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-cosmic {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB28__GPIO_98	0x219d
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
diff --git a/src/arm/vf610-pinfunc.h b/src/arm/vf610-pinfunc.h
new file mode 100644
index 000000000000..1ee681f7ce2f
--- /dev/null
+++ b/src/arm/vf610-pinfunc.h
@@ -0,0 +1,810 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_VF610_PINFUNC_H
+#define __DTS_VF610_PINFUNC_H
+
+/*
+ * The pin function ID for VF610 is a tuple of:
+ * <mux_reg input_reg mux_mode input_val>
+ */
+
+#define ALT0	0x0
+#define ALT1	0x1
+#define ALT2	0x2
+#define ALT3	0x3
+#define ALT4	0x4
+#define ALT5	0x5
+#define ALT6	0x6
+#define ALT7	0x7
+
+
+#define VF610_PAD_PTA6__GPIO_0			0x000 0x000 ALT0 0x0
+#define VF610_PAD_PTA6__RMII_CLKOUT		0x000 0x000 ALT1 0x0
+#define VF610_PAD_PTA6__RMII_CLKIN		0x000 0x2F0 ALT2 0x0
+#define VF610_PAD_PTA6__DCU1_TCON11		0x000 0x000 ALT4 0x0
+#define VF610_PAD_PTA6__DCU1_R2			0x000 0x000 ALT7 0x0
+#define VF610_PAD_PTA8__GPIO_1			0x004 0x000 ALT0 0x0
+#define VF610_PAD_PTA8__TCLK			0x004 0x000 ALT1 0x0
+#define VF610_PAD_PTA8__DCU0_R0			0x004 0x000 ALT4 0x0
+#define VF610_PAD_PTA8__MLB_CLK			0x004 0x354 ALT7 0x0
+#define VF610_PAD_PTA9__GPIO_2			0x008 0x000 ALT0 0x0
+#define VF610_PAD_PTA9__TDI			0x008 0x000 ALT1 0x0
+#define VF610_PAD_PTA9__RMII_CLKOUT		0x008 0x000 ALT2 0x0
+#define VF610_PAD_PTA9__RMII_CLKIN		0x008 0x2F0 ALT3 0x1
+#define VF610_PAD_PTA9__DCU0_R1			0x008 0x000 ALT4 0x0
+#define VF610_PAD_PTA9__WDOG_B			0x008 0x000 ALT6 0x0
+#define VF610_PAD_PTA10__GPIO_3			0x00C 0x000 ALT0 0x0
+#define VF610_PAD_PTA10__TDO			0x00C 0x000 ALT1 0x0
+#define VF610_PAD_PTA10__EXT_AUDIO_MCLK		0x00C 0x2EC ALT2 0x0
+#define VF610_PAD_PTA10__DCU0_G0		0x00C 0x000 ALT4 0x0
+#define VF610_PAD_PTA10__ENET_TS_CLKIN		0x00C 0x2F4 ALT6 0x0
+#define VF610_PAD_PTA10__MLB_SIGNAL		0x00C 0x35C ALT7 0x0
+#define VF610_PAD_PTA11__GPIO_4			0x010 0x000 ALT0 0x0
+#define VF610_PAD_PTA11__TMS			0x010 0x000 ALT1 0x0
+#define VF610_PAD_PTA11__DCU0_G1		0x010 0x000 ALT4 0x0
+#define VF610_PAD_PTA11__MLB_DATA		0x010 0x358 ALT7 0x0
+#define VF610_PAD_PTA12__GPIO_5			0x014 0x000 ALT0 0x0
+#define VF610_PAD_PTA12__TRACECK		0x014 0x000 ALT1 0x0
+#define VF610_PAD_PTA12__EXT_AUDIO_MCLK		0x014 0x2EC ALT2 0x1
+#define VF610_PAD_PTA12__VIU_DATA13		0x014 0x000 ALT6 0x0
+#define VF610_PAD_PTA12__I2C0_SCL		0x014 0x33C ALT7 0x0
+#define VF610_PAD_PTA16__GPIO_6			0x018 0x000 ALT0 0x0
+#define VF610_PAD_PTA16__TRACED0		0x018 0x000 ALT1 0x0
+#define VF610_PAD_PTA16__USB0_VBUS_EN		0x018 0x000 ALT2 0x0
+#define VF610_PAD_PTA16__ADC1_SE0		0x018 0x000 ALT3 0x0
+#define VF610_PAD_PTA16__LCD29			0x018 0x000 ALT4 0x0
+#define VF610_PAD_PTA16__SAI2_TX_BCLK		0x018 0x370 ALT5 0x0
+#define VF610_PAD_PTA16__VIU_DATA14		0x018 0x000 ALT6 0x0
+#define VF610_PAD_PTA16__I2C0_SDA		0x018 0x340 ALT7 0x0
+#define VF610_PAD_PTA17__GPIO_7			0x01C 0x000 ALT0 0x0
+#define VF610_PAD_PTA17__TRACED1		0x01C 0x000 ALT1 0x0
+#define VF610_PAD_PTA17__USB0_VBUS_OC		0x01C 0x000 ALT2 0x0
+#define VF610_PAD_PTA17__ADC1_SE1		0x01C 0x000 ALT3 0x0
+#define VF610_PAD_PTA17__LCD30			0x01C 0x000 ALT4 0x0
+#define VF610_PAD_PTA17__USB0_SOF_PULSE		0x01C 0x000 ALT5 0x0
+#define VF610_PAD_PTA17__VIU_DATA15		0x01C 0x000 ALT6 0x0
+#define VF610_PAD_PTA17__I2C1_SCL		0x01C 0x344 ALT7 0x0
+#define VF610_PAD_PTA18__GPIO_8			0x020 0x000 ALT0 0x0
+#define VF610_PAD_PTA18__TRACED2		0x020 0x000 ALT1 0x0
+#define VF610_PAD_PTA18__ADC0_SE0		0x020 0x000 ALT2 0x0
+#define VF610_PAD_PTA18__FTM1_QD_PHA		0x020 0x334 ALT3 0x0
+#define VF610_PAD_PTA18__LCD31			0x020 0x000 ALT4 0x0
+#define VF610_PAD_PTA18__SAI2_TX_DATA		0x020 0x000 ALT5 0x0
+#define VF610_PAD_PTA18__VIU_DATA16		0x020 0x000 ALT6 0x0
+#define VF610_PAD_PTA18__I2C1_SDA		0x020 0x348 ALT7 0x0
+#define VF610_PAD_PTA19__GPIO_9			0x024 0x000 ALT0 0x0
+#define VF610_PAD_PTA19__TRACED3		0x024 0x000 ALT1 0x0
+#define VF610_PAD_PTA19__ADC0_SE1		0x024 0x000 ALT2 0x0
+#define VF610_PAD_PTA19__FTM1_QD_PHB		0x024 0x338 ALT3 0x0
+#define VF610_PAD_PTA19__LCD32			0x024 0x000 ALT4 0x0
+#define VF610_PAD_PTA19__SAI2_TX_SYNC		0x024 0x000 ALT5 0x0
+#define VF610_PAD_PTA19__VIU_DATA17		0x024 0x000 ALT6 0x0
+#define VF610_PAD_PTA19__QSPI1_A_QSCK		0x024 0x374 ALT7 0x0
+#define VF610_PAD_PTA20__GPIO_10		0x028 0x000 ALT0 0x0
+#define VF610_PAD_PTA20__TRACED4		0x028 0x000 ALT1 0x0
+#define VF610_PAD_PTA20__LCD33			0x028 0x000 ALT4 0x0
+#define VF610_PAD_PTA20__UART3_TX		0x028 0x394 ALT6 0x0
+#define VF610_PAD_PTA20__DCU1_HSYNC		0x028 0x000 ALT7 0x0
+#define VF610_PAD_PTA21__GPIO_11		0x02C 0x000 ALT0 0x0
+#define VF610_PAD_PTA21__TRACED5		0x02C 0x000 ALT1 0x0
+#define VF610_PAD_PTA21__SAI2_RX_BCLK		0x02C 0x364 ALT5 0x0
+#define VF610_PAD_PTA21__UART3_RX		0x02C 0x390 ALT6 0x0
+#define VF610_PAD_PTA21__DCU1_VSYNC		0x02C 0x000 ALT7 0x0
+#define VF610_PAD_PTA22__GPIO_12		0x030 0x000 ALT0 0x0
+#define VF610_PAD_PTA22__TRACED6		0x030 0x000 ALT1 0x0
+#define VF610_PAD_PTA22__SAI2_RX_DATA		0x030 0x368 ALT5 0x0
+#define VF610_PAD_PTA22__I2C2_SCL		0x030 0x34C ALT6 0x0
+#define VF610_PAD_PTA22__DCU1_TAG		0x030 0x000 ALT7 0x0
+#define VF610_PAD_PTA23__GPIO_13		0x034 0x000 ALT0 0x0
+#define VF610_PAD_PTA23__TRACED7		0x034 0x000 ALT1 0x0
+#define VF610_PAD_PTA23__SAI2_RX_SYNC		0x034 0x36C ALT5 0x0
+#define VF610_PAD_PTA23__I2C2_SDA		0x034 0x350 ALT6 0x0
+#define VF610_PAD_PTA23__DCU1_DE		0x034 0x000 ALT7 0x0
+#define VF610_PAD_PTA24__GPIO_14		0x038 0x000 ALT0 0x0
+#define VF610_PAD_PTA24__TRACED8		0x038 0x000 ALT1 0x0
+#define VF610_PAD_PTA24__USB1_VBUS_EN		0x038 0x000 ALT2 0x0
+#define VF610_PAD_PTA24__ESDHC1_CLK		0x038 0x000 ALT5 0x0
+#define VF610_PAD_PTA24__DCU1_TCON4		0x038 0x000 ALT6 0x0
+#define VF610_PAD_PTA24__DDR_TEST_PAD_CTRL	0x038 0x000 ALT7 0x0
+#define VF610_PAD_PTA25__GPIO_15		0x03C 0x000 ALT0 0x0
+#define VF610_PAD_PTA25__TRACED9		0x03C 0x000 ALT1 0x0
+#define VF610_PAD_PTA25__USB1_VBUS_OC		0x03C 0x000 ALT2 0x0
+#define VF610_PAD_PTA25__ESDHC1_CMD		0x03C 0x000 ALT5 0x0
+#define VF610_PAD_PTA25__DCU1_TCON5		0x03C 0x000 ALT6 0x0
+#define VF610_PAD_PTA26__GPIO_16		0x040 0x000 ALT0 0x0
+#define VF610_PAD_PTA26__TRACED10		0x040 0x000 ALT1 0x0
+#define VF610_PAD_PTA26__SAI3_TX_BCLK		0x040 0x000 ALT2 0x0
+#define VF610_PAD_PTA26__ESDHC1_DAT0		0x040 0x000 ALT5 0x0
+#define VF610_PAD_PTA26__DCU1_TCON6		0x040 0x000 ALT6 0x0
+#define VF610_PAD_PTA27__GPIO_17		0x044 0x000 ALT0 0x0
+#define VF610_PAD_PTA27__TRACED11		0x044 0x000 ALT1 0x0
+#define VF610_PAD_PTA27__SAI3_RX_BCLK		0x044 0x000 ALT2 0x0
+#define VF610_PAD_PTA27__ESDHC1_DAT1		0x044 0x000 ALT5 0x0
+#define VF610_PAD_PTA27__DCU1_TCON7		0x044 0x000 ALT6 0x0
+#define VF610_PAD_PTA28__GPIO_18		0x048 0x000 ALT0 0x0
+#define VF610_PAD_PTA28__TRACED12		0x048 0x000 ALT1 0x0
+#define VF610_PAD_PTA28__SAI3_RX_DATA		0x048 0x000 ALT2 0x0
+#define VF610_PAD_PTA28__ENET1_1588_TMR0	0x048 0x000 ALT3 0x0
+#define VF610_PAD_PTA28__UART4_TX		0x048 0x000 ALT4 0x0
+#define VF610_PAD_PTA28__ESDHC1_DATA2		0x048 0x000 ALT5 0x0
+#define VF610_PAD_PTA28__DCU1_TCON8		0x048 0x000 ALT6 0x0
+#define VF610_PAD_PTA29__GPIO_19		0x04C 0x000 ALT0 0x0
+#define VF610_PAD_PTA29__TRACED13		0x04C 0x000 ALT1 0x0
+#define VF610_PAD_PTA29__SAI3_TX_DATA		0x04C 0x000 ALT2 0x0
+#define VF610_PAD_PTA29__ENET1_1588_TMR1	0x04C 0x000 ALT3 0x0
+#define VF610_PAD_PTA29__UART4_RX		0x04C 0x000 ALT4 0x0
+#define VF610_PAD_PTA29__ESDHC1_DAT3		0x04C 0x000 ALT5 0x0
+#define VF610_PAD_PTA29__DCU1_TCON9		0x04C 0x000 ALT6 0x0
+#define VF610_PAD_PTA30__GPIO_20		0x050 0x000 ALT0 0x0
+#define VF610_PAD_PTA30__TRACED14		0x050 0x000 ALT1 0x0
+#define VF610_PAD_PTA30__SAI3_RX_SYNC		0x050 0x000 ALT2 0x0
+#define VF610_PAD_PTA30__ENET1_1588_TMR2	0x050 0x000 ALT3 0x0
+#define VF610_PAD_PTA30__UART4_RTS		0x050 0x000 ALT4 0x0
+#define VF610_PAD_PTA30__I2C3_SCL		0x050 0x000 ALT5 0x0
+#define VF610_PAD_PTA30__UART3_TX		0x050 0x394 ALT7 0x1
+#define VF610_PAD_PTA31__GPIO_21		0x054 0x000 ALT0 0x0
+#define VF610_PAD_PTA31__TRACED15		0x054 0x000 ALT1 0x0
+#define VF610_PAD_PTA31__SAI3_TX_SYNC		0x054 0x000 ALT2 0x0
+#define VF610_PAD_PTA31__ENET1_1588_TMR3	0x054 0x000 ALT3 0x0
+#define VF610_PAD_PTA31__UART4_CTS		0x054 0x000 ALT4 0x0
+#define VF610_PAD_PTA31__I2C3_SDA		0x054 0x000 ALT5 0x0
+#define VF610_PAD_PTA31__UART3_RX		0x054 0x390 ALT7 0x1
+#define VF610_PAD_PTB0__GPIO_22			0x058 0x000 ALT0 0x0
+#define VF610_PAD_PTB0__FTM0_CH0		0x058 0x000 ALT1 0x0
+#define VF610_PAD_PTB0__ADC0_SE2		0x058 0x000 ALT2 0x0
+#define VF610_PAD_PTB0__TRACE_CTL		0x058 0x000 ALT3 0x0
+#define VF610_PAD_PTB0__LCD34			0x058 0x000 ALT4 0x0
+#define VF610_PAD_PTB0__SAI2_RX_BCLK		0x058 0x364 ALT5 0x1
+#define VF610_PAD_PTB0__VIU_DATA18		0x058 0x000 ALT6 0x0
+#define VF610_PAD_PTB0__QSPI1_A_QPCS0		0x058 0x000 ALT7 0x0
+#define VF610_PAD_PTB1__GPIO_23			0x05C 0x000 ALT0 0x0
+#define VF610_PAD_PTB1__FTM0_CH1		0x05C 0x000 ALT1 0x0
+#define VF610_PAD_PTB1__ADC0_SE3		0x05C 0x000 ALT2 0x0
+#define VF610_PAD_PTB1__SRC_RCON30		0x05C 0x000 ALT3 0x0
+#define VF610_PAD_PTB1__LCD35			0x05C 0x000 ALT4 0x0
+#define VF610_PAD_PTB1__SAI2_RX_DATA		0x05C 0x368 ALT5 0x1
+#define VF610_PAD_PTB1__VIU_DATA19		0x05C 0x000 ALT6 0x0
+#define VF610_PAD_PTB1__QSPI1_A_DATA3		0x05C 0x000 ALT7 0x0
+#define VF610_PAD_PTB2__GPIO_24			0x060 0x000 ALT0 0x0
+#define VF610_PAD_PTB2__FTM0_CH2		0x060 0x000 ALT1 0x0
+#define VF610_PAD_PTB2__ADC1_SE2		0x060 0x000 ALT2 0x0
+#define VF610_PAD_PTB2__SRC_RCON31		0x060 0x000 ALT3 0x0
+#define VF610_PAD_PTB2__LCD36			0x060 0x000 ALT4 0x0
+#define VF610_PAD_PTB2__SAI2_RX_SYNC		0x060 0x36C ALT5 0x1
+#define VF610_PAD_PTB2__VIDEO_IN0_DATA20	0x060 0x000 ALT6 0x0
+#define VF610_PAD_PTB2__QSPI1_A_DATA2		0x060 0x000 ALT7 0x0
+#define VF610_PAD_PTB3__GPIO_25			0x064 0x000 ALT0 0x0
+#define VF610_PAD_PTB3__FTM0_CH3		0x064 0x000 ALT1 0x0
+#define VF610_PAD_PTB3__ADC1_SE3		0x064 0x000 ALT2 0x0
+#define VF610_PAD_PTB3__PDB_EXTRIG		0x064 0x000 ALT3 0x0
+#define VF610_PAD_PTB3__LCD37			0x064 0x000 ALT4 0x0
+#define VF610_PAD_PTB3__VIU_DATA21		0x064 0x000 ALT6 0x0
+#define VF610_PAD_PTB3__QSPI1_A_DATA1		0x064 0x000 ALT7 0x0
+#define VF610_PAD_PTB4__GPIO_26			0x068 0x000 ALT0 0x0
+#define VF610_PAD_PTB4__FTM0_CH4		0x068 0x000 ALT1 0x0
+#define VF610_PAD_PTB4__UART1_TX		0x068 0x380 ALT2 0x0
+#define VF610_PAD_PTB4__ADC0_SE4		0x068 0x000 ALT3 0x0
+#define VF610_PAD_PTB4__LCD38			0x068 0x000 ALT4 0x0
+#define VF610_PAD_PTB4__VIU_FID			0x068 0x3A8 ALT5 0x0
+#define VF610_PAD_PTB4__VIU_DATA22		0x068 0x000 ALT6 0x0
+#define VF610_PAD_PTB4__QSPI1_A_DATA0		0x068 0x000 ALT7 0x0
+#define VF610_PAD_PTB5__GPIO_27			0x06C 0x000 ALT0 0x0
+#define VF610_PAD_PTB5__FTM0_CH5		0x06C 0x000 ALT1 0x0
+#define VF610_PAD_PTB5__UART1_RX		0x06C 0x37C ALT2 0x0
+#define VF610_PAD_PTB5__ADC1_SE4		0x06C 0x000 ALT3 0x0
+#define VF610_PAD_PTB5__LCD39			0x06C 0x000 ALT4 0x0
+#define VF610_PAD_PTB5__VIU_DE			0x06C 0x3A4 ALT5 0x0
+#define VF610_PAD_PTB5__QSPI1_A_DQS		0x06C 0x000 ALT7 0x0
+#define VF610_PAD_PTB6__GPIO_28			0x070 0x000 ALT0 0x0
+#define VF610_PAD_PTB6__FTM0_CH6		0x070 0x000 ALT1 0x0
+#define VF610_PAD_PTB6__UART1_RTS		0x070 0x000 ALT2 0x0
+#define VF610_PAD_PTB6__QSPI0_QPCS1_A		0x070 0x000 ALT3 0x0
+#define VF610_PAD_PTB6__LCD_LCD40		0x070 0x000 ALT4 0x0
+#define VF610_PAD_PTB6__FB_CLKOUT		0x070 0x000 ALT5 0x0
+#define VF610_PAD_PTB6__VIU_HSYNC		0x070 0x000 ALT6 0x0
+#define VF610_PAD_PTB6__UART2_TX		0x070 0x38C ALT7 0x0
+#define VF610_PAD_PTB7__GPIO_29			0x074 0x000 ALT0 0x0
+#define VF610_PAD_PTB7__FTM0_CH7		0x074 0x000 ALT1 0x0
+#define VF610_PAD_PTB7__UART1_CTS		0x074 0x378 ALT2 0x0
+#define VF610_PAD_PTB7__QSPI0_B_QPCS1		0x074 0x000 ALT3 0x0
+#define VF610_PAD_PTB7__LCD41			0x074 0x000 ALT4 0x0
+#define VF610_PAD_PTB7__VIU_VSYNC		0x074 0x000 ALT6 0x0
+#define VF610_PAD_PTB7__UART2_RX		0x074 0x388 ALT7 0x0
+#define VF610_PAD_PTB8__GPIO_30			0x078 0x000 ALT0 0x0
+#define VF610_PAD_PTB8__FTM1_CH0		0x078 0x32C ALT1 0x0
+#define VF610_PAD_PTB8__FTM1_QD_PHA		0x078 0x334 ALT3 0x1
+#define VF610_PAD_PTB8__VIU_DE			0x078 0x3A4 ALT5 0x1
+#define VF610_PAD_PTB8__DCU1_R6			0x078 0x000 ALT7 0x0
+#define VF610_PAD_PTB9__GPIO_31			0x07C 0x000 ALT0 0x0
+#define VF610_PAD_PTB9__FTM1_CH1		0x07C 0x330 ALT1 0x0
+#define VF610_PAD_PTB9__FTM1_QD_PHB		0x07C 0x338 ALT3 0x1
+#define VF610_PAD_PTB9__DCU1_R7			0x07C 0x000 ALT7 0x0
+#define VF610_PAD_PTB10__GPIO_32		0x080 0x000 ALT0 0x0
+#define VF610_PAD_PTB10__UART0_TX		0x080 0x000 ALT1 0x0
+#define VF610_PAD_PTB10__DCU0_TCON4		0x080 0x000 ALT4 0x0
+#define VF610_PAD_PTB10__VIU_DE			0x080 0x3A4 ALT5 0x2
+#define VF610_PAD_PTB10__CKO1			0x080 0x000 ALT6 0x0
+#define VF610_PAD_PTB10__ENET_TS_CLKIN		0x080 0x2F4 ALT7 0x1
+#define VF610_PAD_PTB11__GPIO_33		0x084 0x000 ALT0 0x0
+#define VF610_PAD_PTB11__UART0_RX		0x084 0x000 ALT1 0x0
+#define VF610_PAD_PTB11__DCU0_TCON5		0x084 0x000 ALT4 0x0
+#define VF610_PAD_PTB11__SNVS_ALARM_OUT_B	0x084 0x000 ALT5 0x0
+#define VF610_PAD_PTB11__CKO2			0x084 0x000 ALT6 0x0
+#define VF610_PAD_PTB11_ENET0_1588_TMR0		0x084 0x304 ALT7 0x0
+#define VF610_PAD_PTB12__GPIO_34		0x088 0x000 ALT0 0x0
+#define VF610_PAD_PTB12__UART0_RTS		0x088 0x000 ALT1 0x0
+#define VF610_PAD_PTB12__DSPI0_CS5		0x088 0x000 ALT3 0x0
+#define VF610_PAD_PTB12__DCU0_TCON6		0x088 0x000 ALT4 0x0
+#define VF610_PAD_PTB12__FB_AD1			0x088 0x000 ALT5 0x0
+#define VF610_PAD_PTB12__NMI			0x088 0x000 ALT6 0x0
+#define VF610_PAD_PTB12__ENET0_1588_TMR1	0x088 0x308 ALT7 0x0
+#define VF610_PAD_PTB13__GPIO_35		0x08C 0x000 ALT0 0x0
+#define VF610_PAD_PTB13__UART0_CTS		0x08C 0x000 ALT1 0x0
+#define VF610_PAD_PTB13__DSPI0_CS4		0x08C 0x000 ALT3 0x0
+#define VF610_PAD_PTB13__DCU0_TCON7		0x08C 0x000 ALT4 0x0
+#define VF610_PAD_PTB13__FB_AD0			0x08C 0x000 ALT5 0x0
+#define VF610_PAD_PTB13__TRACE_CTL		0x08C 0x000 ALT6 0x0
+#define VF610_PAD_PTB14__GPIO_36		0x090 0x000 ALT0 0x0
+#define VF610_PAD_PTB14__CAN0_RX		0x090 0x000 ALT1 0x0
+#define VF610_PAD_PTB14__I2C0_SCL		0x090 0x33C ALT2 0x1
+#define VF610_PAD_PTB14__DCU0_TCON8		0x090 0x000 ALT4 0x0
+#define VF610_PAD_PTB14__DCU1_PCLK		0x090 0x000 ALT7 0x0
+#define VF610_PAD_PTB15__GPIO_37		0x094 0x000 ALT0 0x0
+#define VF610_PAD_PTB15__CAN0_TX		0x094 0x000 ALT1 0x0
+#define VF610_PAD_PTB15__I2C0_SDA		0x094 0x340 ALT2 0x1
+#define VF610_PAD_PTB15__DCU0_TCON9		0x094 0x000 ALT4 0x0
+#define VF610_PAD_PTB15__VIU_PIX_CLK		0x094 0x3AC ALT7 0x0
+#define VF610_PAD_PTB16__GPIO_38		0x098 0x000 ALT0 0x0
+#define VF610_PAD_PTB16__CAN1_RX		0x098 0x000 ALT1 0x0
+#define VF610_PAD_PTB16__I2C1_SCL		0x098 0x344 ALT2 0x1
+#define VF610_PAD_PTB16__DCU0_TCON10		0x098 0x000 ALT4 0x0
+#define VF610_PAD_PTB17__GPIO_39		0x09C 0x000 ALT0 0x0
+#define VF610_PAD_PTB17__CAN1_TX		0x09C 0x000 ALT1 0x0
+#define VF610_PAD_PTB17__I2C1_SDA		0x09C 0x348 ALT2 0x1
+#define VF610_PAD_PTB17__DCU0_TCON11		0x09C 0x000 ALT4 0x0
+#define VF610_PAD_PTB18__GPIO_40		0x0A0 0x000 ALT0 0x0
+#define VF610_PAD_PTB18__DSPI0_CS1		0x0A0 0x000 ALT1 0x0
+#define VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x0A0 0x2EC ALT2 0x2
+#define VF610_PAD_PTB18__VIU_DATA9		0x0A0 0x000 ALT6 0x0
+#define VF610_PAD_PTB19__GPIO_41		0x0A4 0x000 ALT0 0x0
+#define VF610_PAD_PTB19__DSPI0_CS0		0x0A4 0x000 ALT1 0x0
+#define VF610_PAD_PTB19__VIU_DATA10		0x0A4 0x000 ALT6 0x0
+#define VF610_PAD_PTB20__GPIO_42		0x0A8 0x000 ALT0 0x0
+#define VF610_PAD_PTB20__DSPI0_SIN		0x0A8 0x000 ALT1 0x0
+#define VF610_PAD_PTB20__LCD42			0x0A8 0x000 ALT4 0x0
+#define VF610_PAD_PTB20__VIU_DATA11		0x0A8 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__GPIO_43		0x0AC 0x000 ALT0 0x0
+#define VF610_PAD_PTB21__DSPI0_SOUT		0x0AC 0x000 ALT1 0x0
+#define VF610_PAD_PTB21__LCD43			0x0AC 0x000 ALT4 0x0
+#define VF610_PAD_PTB21__VIU_DATA12		0x0AC 0x000 ALT6 0x0
+#define VF610_PAD_PTB21__DCU1_PCLK		0x0AC 0x000 ALT7 0x0
+#define VF610_PAD_PTB22__GPIO_44		0x0B0 0x000 ALT0 0x0
+#define VF610_PAD_PTB22__DSPI0_SCK		0x0B0 0x000 ALT1 0x0
+#define VF610_PAD_PTB22__VLCD			0x0B0 0x000 ALT4 0x0
+#define VF610_PAD_PTB22__VIU_FID		0x0B0 0x3A8 ALT5 0x1
+#define VF610_PAD_PTC0__GPIO_45			0x0B4 0x000 ALT0 0x0
+#define VF610_PAD_PTC0__ENET_RMII0_MDC		0x0B4 0x000 ALT1 0x0
+#define VF610_PAD_PTC0__FTM1_CH0		0x0B4 0x32C ALT2 0x1
+#define VF610_PAD_PTC0__DSPI0_CS3		0x0B4 0x000 ALT3 0x0
+#define VF610_PAD_PTC0__ESAI_SCKT		0x0B4 0x310 ALT4 0x0
+#define VF610_PAD_PTC0__ESDHC0_CLK		0x0B4 0x000 ALT5 0x0
+#define VF610_PAD_PTC0__VIU_DATA0		0x0B4 0x000 ALT6 0x0
+#define VF610_PAD_PTC0__SRC_RCON18		0x0B4 0x398 ALT7 0x0
+#define VF610_PAD_PTC1__GPIO_46			0x0B8 0x000 ALT0 0x0
+#define VF610_PAD_PTC1__ENET_RMII0_MDIO		0x0B8 0x000 ALT1 0x0
+#define VF610_PAD_PTC1__FTM1_CH1		0x0B8 0x330 ALT2 0x1
+#define VF610_PAD_PTC1__DSPI0_CS2		0x0B8 0x000 ALT3 0x0
+#define VF610_PAD_PTC1__ESAI_FST		0x0B8 0x30C ALT4 0x0
+#define VF610_PAD_PTC1__ESDHC0_CMD		0x0B8 0x000 ALT5 0x0
+#define VF610_PAD_PTC1__VIU_DATA1		0x0B8 0x000 ALT6 0x0
+#define VF610_PAD_PTC1__SRC_RCON19		0x0B8 0x39C ALT7 0x0
+#define VF610_PAD_PTC2__GPIO_47			0x0BC 0x000 ALT0 0x0
+#define VF610_PAD_PTC2__ENET_RMII0_CRS		0x0BC 0x000 ALT1 0x0
+#define VF610_PAD_PTC2__UART1_TX		0x0BC 0x380 ALT2 0x1
+#define VF610_PAD_PTC2__ESAI_SDO0		0x0BC 0x314 ALT4 0x0
+#define VF610_PAD_PTC2__ESDHC0_DAT0		0x0BC 0x000 ALT5 0x0
+#define VF610_PAD_PTC2__VIU_DATA2		0x0BC 0x000 ALT6 0x0
+#define VF610_PAD_PTC2__SRC_RCON20		0x0BC 0x3A0 ALT7 0x0
+#define VF610_PAD_PTC3__GPIO_48			0x0C0 0x000 ALT0 0x0
+#define VF610_PAD_PTC3__ENET_RMII0_RXD1		0x0C0 0x000 ALT1 0x0
+#define VF610_PAD_PTC3__UART1_RX		0x0C0 0x37C ALT2 0x1
+#define VF610_PAD_PTC3__ESAI_SDO1		0x0C0 0x318 ALT4 0x0
+#define VF610_PAD_PTC3__ESDHC0_DAT1		0x0C0 0x000 ALT5 0x0
+#define VF610_PAD_PTC3__VIU_DATA3		0x0C0 0x000 ALT6 0x0
+#define VF610_PAD_PTC3__DCU0_R0			0x0C0 0x000 ALT7 0x0
+#define VF610_PAD_PTC4__GPIO_49			0x0C4 0x000 ALT0 0x0
+#define VF610_PAD_PTC4__ENET_RMII0_RXD0		0x0C4 0x000 ALT1 0x0
+#define VF610_PAD_PTC4__UART1_RTS		0x0C4 0x000 ALT2 0x0
+#define VF610_PAD_PTC4__DSPI1_CS1		0x0C4 0x000 ALT3 0x0
+#define VF610_PAD_PTC4__ESAI_SDO2		0x0C4 0x31C ALT4 0x0
+#define VF610_PAD_PTC4__ESDHC0_DAT2		0x0C4 0x000 ALT5 0x0
+#define VF610_PAD_PTC4__VIU_DATA4		0x0C4 0x000 ALT6 0x0
+#define VF610_PAD_PTC4__DCU0_R1			0x0C4 0x000 ALT7 0x0
+#define VF610_PAD_PTC5__GPIO_50			0x0C8 0x000 ALT0 0x0
+#define VF610_PAD_PTC5__ENET_RMII0_RXER		0x0C8 0x000 ALT1 0x0
+#define VF610_PAD_PTC5__UART1_CTS		0x0C8 0x378 ALT2 0x1
+#define VF610_PAD_PTC5__DSPI1_CS0		0x0C8 0x300 ALT3 0x0
+#define VF610_PAD_PTC5__ESAI_SDO3		0x0C8 0x320 ALT4 0x0
+#define VF610_PAD_PTC5__ESDHC0_DAT3		0x0C8 0x000 ALT5 0x0
+#define VF610_PAD_PTC5__VIU_DATA5		0x0C8 0x000 ALT6 0x0
+#define VF610_PAD_PTC5__DCU0_G0			0x0C8 0x000 ALT7 0x0
+#define VF610_PAD_PTC6__GPIO_51			0x0CC 0x000 ALT0 0x0
+#define VF610_PAD_PTC6__ENET_RMII0_TXD1		0x0CC 0x000 ALT1 0x0
+#define VF610_PAD_PTC6__DSPI1_SIN		0x0CC 0x2FC ALT3 0x0
+#define VF610_PAD_PTC6__ESAI_SDI0		0x0CC 0x328 ALT4 0x0
+#define VF610_PAD_PTC6__ESDHC0_WP		0x0CC 0x000 ALT5 0x0
+#define VF610_PAD_PTC6__VIU_DATA6		0x0CC 0x000 ALT6 0x0
+#define VF610_PAD_PTC6__DCU0_G1			0x0CC 0x000 ALT7 0x0
+#define VF610_PAD_PTC7__GPIO_52			0x0D0 0x000 ALT0 0x0
+#define VF610_PAD_PTC7__ENET_RMII0_TXD0		0x0D0 0x000 ALT1 0x0
+#define VF610_PAD_PTC7__DSPI1_SOUT		0x0D0 0x000 ALT3 0x0
+#define VF610_PAD_PTC7__ESAI_SDI1		0x0D0 0x324 ALT4 0x0
+#define VF610_PAD_PTC7__VIU_DATA7		0x0D0 0x000 ALT6 0x0
+#define VF610_PAD_PTC7__DCU0_B0			0x0D0 0x000 ALT7 0x0
+#define VF610_PAD_PTC8__GPIO_53			0x0D4 0x000 ALT0 0x0
+#define VF610_PAD_PTC8__ENET_RMII0_TXEN		0x0D4 0x000 ALT1 0x0
+#define VF610_PAD_PTC8__DSPI1_SCK		0x0D4 0x2F8 ALT3 0x0
+#define VF610_PAD_PTC8__VIU_DATA8		0x0D4 0x000 ALT6 0x0
+#define VF610_PAD_PTC8__DCU0_B1			0x0D4 0x000 ALT7 0x0
+#define VF610_PAD_PTC9__GPIO_54			0x0D8 0x000 ALT0 0x0
+#define VF610_PAD_PTC9__ENET_RMII1_MDC		0x0D8 0x000 ALT1 0x0
+#define VF610_PAD_PTC9__ESAI_SCKT		0x0D8 0x310 ALT3 0x1
+#define VF610_PAD_PTC9__MLB_CLK			0x0D8 0x354 ALT6 0x1
+#define VF610_PAD_PTC9__DEBUG_OUT0		0x0D8 0x000 ALT7 0x0
+#define VF610_PAD_PTC10__GPIO_55		0x0DC 0x000 ALT0 0x0
+#define VF610_PAD_PTC10__ENET_RMII1_MDIO	0x0DC 0x000 ALT1 0x0
+#define VF610_PAD_PTC10__ESAI_FST		0x0DC 0x30C ALT3 0x1
+#define VF610_PAD_PTC10__MLB_SIGNAL		0x0DC 0x35C ALT6 0x1
+#define VF610_PAD_PTC10__DEBUG_OUT1		0x0DC 0x000 ALT7 0x0
+#define VF610_PAD_PTC11__GPIO_56		0x0E0 0x000 ALT0 0x0
+#define VF610_PAD_PTC11__ENET_RMII1_CRS		0x0E0 0x000 ALT1 0x0
+#define VF610_PAD_PTC11__ESAI_SDO0		0x0E0 0x314 ALT3 0x1
+#define VF610_PAD_PTC11__MLB_DATA		0x0E0 0x358 ALT6 0x1
+#define VF610_PAD_PTC11__DEBUG_OUT		0x0E0 0x000 ALT7 0x0
+#define VF610_PAD_PTC12__GPIO_57		0x0E4 0x000 ALT0 0x0
+#define VF610_PAD_PTC12__ENET_RMII_RXD1		0x0E4 0x000 ALT1 0x0
+#define VF610_PAD_PTC12__ESAI_SDO1		0x0E4 0x318 ALT3 0x1
+#define VF610_PAD_PTC12__SAI2_TX_BCLK		0x0E4 0x370 ALT5 0x1
+#define VF610_PAD_PTC12__DEBUG_OUT3		0x0E4 0x000 ALT7 0x0
+#define VF610_PAD_PTC13__GPIO_58		0x0E8 0x000 ALT0 0x0
+#define VF610_PAD_PTC13__ENET_RMII1_RXD0	0x0E8 0x000 ALT1 0x0
+#define VF610_PAD_PTC13__ESAI_SDO2		0x0E8 0x31C ALT3 0x1
+#define VF610_PAD_PTC13__SAI2_RX_BCLK		0x0E8 0x364 ALT5 0x2
+#define VF610_PAD_PTC13__DEBUG_OUT4		0x0E8 0x000 ALT7 0x0
+#define VF610_PAD_PTC14__GPIO_59		0x0EC 0x000 ALT0 0x0
+#define VF610_PAD_PTC14__ENET_RMII1_RXER	0x0EC 0x000 ALT1 0x0
+#define VF610_PAD_PTC14__ESAI_SDO3		0x0EC 0x320 ALT3 0x1
+#define VF610_PAD_PTC14__UART5_TX		0x0EC 0x000 ALT4 0x0
+#define VF610_PAD_PTC14__SAI2_RX_DATA		0x0EC 0x368 ALT5 0x2
+#define VF610_PAD_PTC14__ADC0_SE6		0x0EC 0x000 ALT6 0x0
+#define VF610_PAD_PTC14__DEBUG_OUT5		0x0EC 0x000 ALT7 0x0
+#define VF610_PAD_PTC15__GPIO_60		0x0F0 0x000 ALT0 0x0
+#define VF610_PAD_PTC15__ENET_RMII1_TXD1	0x0F0 0x000 ALT1 0x0
+#define VF610_PAD_PTC15__ESAI_SDI0		0x0F0 0x328 ALT3 0x1
+#define VF610_PAD_PTC15__UART5_RX		0x0F0 0x000 ALT4 0x0
+#define VF610_PAD_PTC15__SAI2_TX_DATA		0x0F0 0x000 ALT5 0x0
+#define VF610_PAD_PTC15__ADC0_SE7		0x0F0 0x000 ALT6 0x0
+#define VF610_PAD_PTC15__DEBUG_OUT6		0x0F0 0x000 ALT7 0x0
+#define VF610_PAD_PTC16__GPIO_61		0x0F4 0x000 ALT0 0x0
+#define VF610_PAD_PTC16__ENET_RMII1_TXD0	0x0F4 0x000 ALT1 0x0
+#define VF610_PAD_PTC16__ESAI_SDI1		0x0F4 0x324 ALT3 0x1
+#define VF610_PAD_PTC16__UART5_RTS		0x0F4 0x000 ALT4 0x0
+#define VF610_PAD_PTC16__SAI2_RX_SYNC		0x0F4 0x36C ALT5 0x2
+#define VF610_PAD_PTC16__ADC1_SE6		0x0F4 0x000 ALT6 0x0
+#define VF610_PAD_PTC16__DEBUG_OUT7		0x0F4 0x000 ALT7 0x0
+#define VF610_PAD_PTC17__GPIO_62		0x0F8 0x000 ALT0 0x0
+#define VF610_PAD_PTC17__ENET_RMII1_TXEN	0x0F8 0x000 ALT1 0x0
+#define VF610_PAD_PTC17__ADC1_SE7		0x0F8 0x000 ALT3 0x0
+#define VF610_PAD_PTC17__UART5_CTS		0x0F8 0x000 ALT4 0x0
+#define VF610_PAD_PTC17__SAI2_TX_SYNC		0x0F8 0x374 ALT5 0x1
+#define VF610_PAD_PTC17__USB1_SOF_PULSE		0x0F8 0x000 ALT6 0x0
+#define VF610_PAD_PTC17__DEBUG_OUT8		0x0F8 0x000 ALT7 0x0
+#define VF610_PAD_PTD31__GPIO_63		0x0FC 0x000 ALT0 0x0
+#define VF610_PAD_PTD31__FB_AD31		0x0FC 0x000 ALT1 0x0
+#define VF610_PAD_PTD31__NF_IO15		0x0FC 0x000 ALT2 0x0
+#define VF610_PAD_PTD31__FTM3_CH0		0x0FC 0x000 ALT4 0x0
+#define VF610_PAD_PTD31__DSPI2_CS1		0x0FC 0x000 ALT5 0x0
+#define VF610_PAD_PTD31__DEBUG_OUT9		0x0FC 0x000 ALT7 0x0
+#define VF610_PAD_PTD30__GPIO_64		0x100 0x000 ALT0 0x0
+#define VF610_PAD_PTD30__FB_AD30		0x100 0x000 ALT1 0x0
+#define VF610_PAD_PTD30__NF_IO14		0x100 0x000 ALT2 0x0
+#define VF610_PAD_PTD30__FTM3_CH1		0x100 0x000 ALT4 0x0
+#define VF610_PAD_PTD30__DSPI2_CS0		0x100 0x000 ALT5 0x0
+#define VF610_PAD_PTD30__DEBUG_OUT10		0x100 0x000 ALT7 0x0
+#define VF610_PAD_PTD29__GPIO_65		0x104 0x000 ALT0 0x0
+#define VF610_PAD_PTD29__FB_AD29		0x104 0x000 ALT1 0x0
+#define VF610_PAD_PTD29__NF_IO13		0x104 0x000 ALT2 0x0
+#define VF610_PAD_PTD29__FTM3_CH2		0x104 0x000 ALT4 0x0
+#define VF610_PAD_PTD29__DSPI2_SIN		0x104 0x000 ALT5 0x0
+#define VF610_PAD_PTD29__DEBUG_OUT11		0x104 0x000 ALT7 0x0
+#define VF610_PAD_PTD28__GPIO_66	 	0x108 0x000 ALT0 0x0
+#define VF610_PAD_PTD28__FB_AD28		0x108 0x000 ALT1 0x0
+#define VF610_PAD_PTD28__NF_IO12		0x108 0x000 ALT2 0x0
+#define VF610_PAD_PTD28__I2C2_SCL		0x108 0x34C ALT3 0x1
+#define VF610_PAD_PTD28__FTM3_CH3		0x108 0x000 ALT4 0x0
+#define VF610_PAD_PTD28__DSPI2_SOUT		0x108 0x000 ALT5 0x0
+#define VF610_PAD_PTD28__DEBUG_OUT12		0x108 0x000 ALT7 0x0
+#define VF610_PAD_PTD27__GPIO_67		0x10C 0x000 ALT0 0x0
+#define VF610_PAD_PTD27__FB_AD27		0x10C 0x000 ALT1 0x0
+#define VF610_PAD_PTD27__NF_IO11		0x10C 0x000 ALT2 0x0
+#define VF610_PAD_PTD27__I2C2_SDA		0x10C 0x350 ALT3 0x1
+#define VF610_PAD_PTD27__FTM3_CH4		0x10C 0x000 ALT4 0x0
+#define VF610_PAD_PTD27__DSPI2_SCK		0x10C 0x000 ALT5 0x0
+#define VF610_PAD_PTD27__DEBUG_OUT13		0x10C 0x000 ALT7 0x0
+#define VF610_PAD_PTD26__GPIO_68		0x110 0x000 ALT0 0x0
+#define VF610_PAD_PTD26__FB_AD26		0x110 0x000 ALT1 0x0
+#define VF610_PAD_PTD26__NF_IO10		0x110 0x000 ALT2 0x0
+#define VF610_PAD_PTD26__FTM3_CH5		0x110 0x000 ALT4 0x0
+#define VF610_PAD_PTD26__ESDHC1_WP		0x110 0x000 ALT5 0x0
+#define VF610_PAD_PTD26__DEBUG_OUT14		0x110 0x000 ALT7 0x0
+#define VF610_PAD_PTD25__GPIO_69		0x114 0x000 ALT0 0x0
+#define VF610_PAD_PTD25__FB_AD25		0x114 0x000 ALT1 0x0
+#define VF610_PAD_PTD25__NF_IO9			0x114 0x000 ALT2 0x0
+#define VF610_PAD_PTD25__FTM3_CH6		0x114 0x000 ALT4 0x0
+#define VF610_PAD_PTD25__DEBUG_OUT15		0x114 0x000 ALT7 0x0
+#define VF610_PAD_PTD24__GPIO_70		0x118 0x000 ALT0 0x0
+#define VF610_PAD_PTD24__FB_AD24		0x118 0x000 ALT1 0x0
+#define VF610_PAD_PTD24__NF_IO8			0x118 0x000 ALT2 0x0
+#define VF610_PAD_PTD24__FTM3_CH7		0x118 0x000 ALT4 0x0
+#define VF610_PAD_PTD24__DEBUG_OUT16		0x118 0x000 ALT7 0x0
+#define VF610_PAD_PTD23__GPIO_71		0x11C 0x000 ALT0 0x0
+#define VF610_PAD_PTD23__FB_AD23		0x11C 0x000 ALT1 0x0
+#define VF610_PAD_PTD23__NF_IO7			0x11C 0x000 ALT2 0x0
+#define VF610_PAD_PTD23__FTM2_CH0		0x11C 0x000 ALT3 0x0
+#define VF610_PAD_PTD23__ENET0_1588_TMR0	0x11C 0x304 ALT4 0x1
+#define VF610_PAD_PTD23__ESDHC0_DAT4		0x11C 0x000 ALT5 0x0
+#define VF610_PAD_PTD23__UART2_TX		0x11C 0x38C ALT6 0x1
+#define VF610_PAD_PTD23__DCU1_R3		0x11C 0x000 ALT7 0x0
+#define VF610_PAD_PTD22__GPIO_72		0x120 0x000 ALT0 0x0
+#define VF610_PAD_PTD22__FB_AD22		0x120 0x000 ALT1 0x0
+#define VF610_PAD_PTD22__NF_IO6			0x120 0x000 ALT2 0x0
+#define VF610_PAD_PTD22__FTM2_CH1		0x120 0x000 ALT3 0x0
+#define VF610_PAD_PTD22__ENET0_1588_TMR1	0x120 0x308 ALT4 0x1
+#define VF610_PAD_PTD22__ESDHC0_DAT5		0x120 0x000 ALT5 0x0
+#define VF610_PAD_PTD22__UART2_RX		0x120 0x388 ALT6 0x1
+#define VF610_PAD_PTD22__DCU1_R4		0x120 0x000 ALT7 0x0
+#define VF610_PAD_PTD21__GPIO_73		0x124 0x000 ALT0 0x0
+#define VF610_PAD_PTD21__FB_AD21		0x124 0x000 ALT1 0x0
+#define VF610_PAD_PTD21__NF_IO5			0x124 0x000 ALT2 0x0
+#define VF610_PAD_PTD21__ENET0_1588_TMR2	0x124 0x000 ALT4 0x0
+#define VF610_PAD_PTD21__ESDHC0_DAT6		0x124 0x000 ALT5 0x0
+#define VF610_PAD_PTD21__UART2_RTS		0x124 0x000 ALT6 0x0
+#define VF610_PAD_PTD21__DCU1_R5		0x124 0x000 ALT7 0x0
+#define VF610_PAD_PTD20__GPIO_74		0x128 0x000 ALT0 0x0
+#define VF610_PAD_PTD20__FB_AD20		0x128 0x000 ALT1 0x0
+#define VF610_PAD_PTD20__NF_IO4			0x128 0x000 ALT2 0x0
+#define VF610_PAD_PTD20__ENET0_1588_TMR3	0x128 0x000 ALT4 0x0
+#define VF610_PAD_PTD20__ESDHC0_DAT7		0x128 0x000 ALT5 0x0
+#define VF610_PAD_PTD20__UART2_CTS		0x128 0x384 ALT6 0x0
+#define VF610_PAD_PTD20__DCU1_R0		0x128 0x000 ALT7 0x0
+#define VF610_PAD_PTD19__GPIO_75		0x12C 0x000 ALT0 0x0
+#define VF610_PAD_PTD19__FB_AD19		0x12C 0x000 ALT1 0x0
+#define VF610_PAD_PTD19__NF_IO3			0x12C 0x000 ALT2 0x0
+#define VF610_PAD_PTD19__ESAI_SCKR		0x12C 0x000 ALT3 0x0
+#define VF610_PAD_PTD19__I2C0_SCL		0x12C 0x33C ALT4 0x2
+#define VF610_PAD_PTD19__FTM2_QD_PHA		0x12C 0x000 ALT5 0x0
+#define VF610_PAD_PTD19__DCU1_R1		0x12C 0x000 ALT7 0x0
+#define VF610_PAD_PTD18__GPIO_76		0x130 0x000 ALT0 0x0
+#define VF610_PAD_PTD18__FB_AD18		0x130 0x000 ALT1 0x0
+#define VF610_PAD_PTD18__NF_IO2			0x130 0x000 ALT2 0x0
+#define VF610_PAD_PTD18__ESAI_FSR		0x130 0x000 ALT3 0x0
+#define VF610_PAD_PTD18__I2C0_SDA		0x130 0x340 ALT4 0x2
+#define VF610_PAD_PTD18__FTM2_QD_PHB		0x130 0x000 ALT5 0x0
+#define VF610_PAD_PTD18__DCU1_G0		0x130 0x000 ALT7 0x0
+#define VF610_PAD_PTD17__GPIO_77		0x134 0x000 ALT0 0x0
+#define VF610_PAD_PTD17__FB_AD17		0x134 0x000 ALT1 0x0
+#define VF610_PAD_PTD17__NF_IO1			0x134 0x000 ALT2 0x0
+#define VF610_PAD_PTD17__ESAI_HCKR		0x134 0x000 ALT3 0x0
+#define VF610_PAD_PTD17__I2C1_SCL		0x134 0x344 ALT4 0x2
+#define VF610_PAD_PTD17__DCU1_G1		0x134 0x000 ALT7 0x0
+#define VF610_PAD_PTD16__GPIO_78		0x138 0x000 ALT0 0x0
+#define VF610_PAD_PTD16__FB_AD16		0x138 0x000 ALT1 0x0
+#define VF610_PAD_PTD16__NF_IO0			0x138 0x000 ALT2 0x0
+#define VF610_PAD_PTD16__ESAI_HCKT		0x138 0x000 ALT3 0x0
+#define VF610_PAD_PTD16__I2C1_SDA		0x138 0x348 ALT4 0x2
+#define VF610_PAD_PTD16__DCU1_G2		0x138 0x000 ALT7 0x0
+#define VF610_PAD_PTD0__GPIO_79			0x13C 0x000 ALT0 0x0
+#define VF610_PAD_PTD0__QSPI0_A_QSCK		0x13C 0x000 ALT1 0x0
+#define VF610_PAD_PTD0__UART2_TX		0x13C 0x38C ALT2 0x2
+#define VF610_PAD_PTD0__FB_AD15			0x13C 0x000 ALT4 0x0
+#define VF610_PAD_PTD0__SPDIF_EXTCLK		0x13C 0x000 ALT5 0x0
+#define VF610_PAD_PTD0__DEBUG_OUT17		0x13C 0x000 ALT7 0x0
+#define VF610_PAD_PTD1__GPIO_80			0x140 0x000 ALT0 0x0
+#define VF610_PAD_PTD1__QSPI0_A_CS0		0x140 0x000 ALT1 0x0
+#define VF610_PAD_PTD1__UART2_RX		0x140 0x388 ALT2 0x2
+#define VF610_PAD_PTD1__FB_AD14			0x140 0x000 ALT4 0x0
+#define VF610_PAD_PTD1__SPDIF_IN1		0x140 0x000 ALT5 0x0
+#define VF610_PAD_PTD1__DEBUG_OUT18		0x140 0x000 ALT7 0x0
+#define VF610_PAD_PTD2__GPIO_81			0x144 0x000 ALT0 0x0
+#define VF610_PAD_PTD2__QSPI0_A_DATA3		0x144 0x000 ALT1 0x0
+#define VF610_PAD_PTD2__UART2_RTS		0x144 0x000 ALT2 0x0
+#define VF610_PAD_PTD2__DSPI1_CS3		0x144 0x000 ALT3 0x0
+#define VF610_PAD_PTD2__FB_AD13			0x144 0x000 ALT4 0x0
+#define VF610_PAD_PTD2__SPDIF_OUT1		0x144 0x000 ALT5 0x0
+#define VF610_PAD_PTD2__DEBUG_OUT19		0x144 0x000 ALT7 0x0
+#define VF610_PAD_PTD3__GPIO_82			0x148 0x000 ALT0 0x0
+#define VF610_PAD_PTD3__QSPI0_A_DATA2		0x148 0x000 ALT1 0x0
+#define VF610_PAD_PTD3__UART2_CTS		0x148 0x384 ALT2 0x1
+#define VF610_PAD_PTD3__DSPI1_CS2		0x148 0x000 ALT3 0x0
+#define VF610_PAD_PTD3__FB_AD12			0x148 0x000 ALT4 0x0
+#define VF610_PAD_PTD3__SPDIF_PLOCK		0x148 0x000 ALT5 0x0
+#define VF610_PAD_PTD3__DEBUG_OUT20		0x148 0x000 ALT7 0x0
+#define VF610_PAD_PTD4__GPIO_83			0x14C 0x000 ALT0 0x0
+#define VF610_PAD_PTD4__QSPI0_A_DATA1		0x14C 0x000 ALT1 0x0
+#define VF610_PAD_PTD4__DSPI1_CS1		0x14C 0x000 ALT3 0x0
+#define VF610_PAD_PTD4__FB_AD11			0x14C 0x000 ALT4 0x0
+#define VF610_PAD_PTD4__SPDIF_SRCLK		0x14C 0x000 ALT5 0x0
+#define VF610_PAD_PTD4__DEBUG_OUT21		0x14C 0x000 ALT7 0x0
+#define VF610_PAD_PTD5__GPIO_84			0x150 0x000 ALT0 0x0
+#define VF610_PAD_PTD5__QSPI0_A_DATA0		0x150 0x000 ALT1 0x0
+#define VF610_PAD_PTD5__DSPI1_CS0		0x150 0x300 ALT3 0x1
+#define VF610_PAD_PTD5__FB_AD10			0x150 0x000 ALT4 0x0
+#define VF610_PAD_PTD5__DEBUG_OUT22		0x150 0x000 ALT7 0x0
+#define VF610_PAD_PTD6__GPIO_85			0x154 0x000 ALT0 0x0
+#define VF610_PAD_PTD6__QSPI1_A_DQS		0x154 0x000 ALT1 0x0
+#define VF610_PAD_PTD6__DSPI1_SIN		0x154 0x2FC ALT3 0x1
+#define VF610_PAD_PTD6__FB_AD9			0x154 0x000 ALT4 0x0
+#define VF610_PAD_PTD6__DEBUG_OUT23		0x154 0x000 ALT7 0x0
+#define VF610_PAD_PTD7__GPIO_86			0x158 0x000 ALT0 0x0
+#define VF610_PAD_PTD7__QSPI0_B_QSCK		0x158 0x000 ALT1 0x0
+#define VF610_PAD_PTD7__DSPI1_SOUT		0x158 0x000 ALT3 0x0
+#define VF610_PAD_PTD7__FB_AD8			0x158 0x000 ALT4 0x0
+#define VF610_PAD_PTD7__DEBUG_OUT24		0x158 0x000 ALT7 0x0
+#define VF610_PAD_PTD8__GPIO_87			0x15C 0x000 ALT0 0x0
+#define VF610_PAD_PTD8__QSPI0_B_CS0		0x15C 0x000 ALT1 0x0
+#define VF610_PAD_PTD8__FB_CLKOUT		0x15C 0x000 ALT2 0x0
+#define VF610_PAD_PTD8__DSPI1_SCK		0x15C 0x2F8 ALT3 0x1
+#define VF610_PAD_PTD8__FB_AD7			0x15C 0x000 ALT4 0x0
+#define VF610_PAD_PTD8__DEBUG_OUT25		0x15C 0x000 ALT7 0x0
+#define VF610_PAD_PTD9__GPIO_88			0x160 0x000 ALT0 0x0
+#define VF610_PAD_PTD9__QSPI0_B_DATA3		0x160 0x000 ALT1 0x0
+#define VF610_PAD_PTD9__DSPI3_CS1		0x160 0x000 ALT2 0x0
+#define VF610_PAD_PTD9__FB_AD6			0x160 0x000 ALT4 0x0
+#define VF610_PAD_PTD9__SAI1_TX_SYNC		0x160 0x360 ALT6 0x0
+#define VF610_PAD_PTD9__DCU1_B0			0x160 0x000 ALT7 0x0
+#define VF610_PAD_PTD10__GPIO_89		0x164 0x000 ALT0 0x0
+#define VF610_PAD_PTD10__QSPI0_B_DATA2		0x164 0x000 ALT1 0x0
+#define VF610_PAD_PTD10__DSPI3_CS0		0x164 0x000 ALT2 0x0
+#define VF610_PAD_PTD10__FB_AD5			0x164 0x000 ALT4 0x0
+#define VF610_PAD_PTD10__DCU1_B1		0x164 0x000 ALT7 0x0
+#define VF610_PAD_PTD11__GPIO_90		0x168 0x000 ALT0 0x0
+#define VF610_PAD_PTD11__QSPI0_B_DATA1		0x168 0x000 ALT1 0x0
+#define VF610_PAD_PTD11__DSPI3_SIN		0x168 0x000 ALT2 0x0
+#define VF610_PAD_PTD11__FB_AD4			0x168 0x000 ALT4 0x0
+#define VF610_PAD_PTD11__DEBUG_OUT26		0x168 0x000 ALT7 0x0
+#define VF610_PAD_PTD12__GPIO_91		0x16C 0x000 ALT0 0x0
+#define VF610_PAD_PTD12__QSPI0_B_DATA0		0x16C 0x000 ALT1 0x0
+#define VF610_PAD_PTD12__DSPI3_SOUT		0x16C 0x000 ALT2 0x0
+#define VF610_PAD_PTD12__FB_AD3			0x16C 0x000 ALT4 0x0
+#define VF610_PAD_PTD12__DEBUG_OUT27		0x16C 0x000 ALT7 0x0
+#define VF610_PAD_PTD13__GPIO_92		0x170 0x000 ALT0 0x0
+#define VF610_PAD_PTD13__QSPI0_B_DQS		0x170 0x000 ALT1 0x0
+#define VF610_PAD_PTD13__DSPI3_SCK		0x170 0x000 ALT2 0x0
+#define VF610_PAD_PTD13__FB_AD2			0x170 0x000 ALT4 0x0
+#define VF610_PAD_PTD13__DEBUG_OUT28		0x170 0x000 ALT7 0x0
+#define VF610_PAD_PTB23__GPIO_93		0x174 0x000 ALT0 0x0
+#define VF610_PAD_PTB23__SAI0_TX_BCLK		0x174 0x000 ALT1 0x0
+#define VF610_PAD_PTB23__UART1_TX		0x174 0x380 ALT2 0x2
+#define VF610_PAD_PTB23__SRC_RCON18		0x174 0x398 ALT3 0x1
+#define VF610_PAD_PTB23__FB_MUXED_ALE		0x174 0x000 ALT4 0x0
+#define VF610_PAD_PTB23__FB_TS_B		0x174 0x000 ALT5 0x0
+#define VF610_PAD_PTB23__UART3_RTS		0x174 0x000 ALT6 0x0
+#define VF610_PAD_PTB23__DCU1_G3		0x174 0x000 ALT7 0x0
+#define VF610_PAD_PTB24__GPIO_94		0x178 0x000 ALT0 0x0
+#define VF610_PAD_PTB24__SAI0_RX_BCLK		0x178 0x000 ALT1 0x0
+#define VF610_PAD_PTB24__UART1_RX		0x178 0x37C ALT2 0x2
+#define VF610_PAD_PTB24__SRC_RCON19		0x178 0x39C ALT3 0x1
+#define VF610_PAD_PTB24__FB_MUXED_TSIZ0		0x178 0x000 ALT4 0x0
+#define VF610_PAD_PTB24__NF_WE_B		0x178 0x000 ALT5 0x0
+#define VF610_PAD_PTB24__UART3_CTS		0x178 0x000 ALT6 0x0
+#define VF610_PAD_PTB24__DCU1_G4		0x178 0x000 ALT7 0x0
+#define VF610_PAD_PTB25__GPIO_95		0x17C 0x000 ALT0 0x0
+#define VF610_PAD_PTB25__SAI0_RX_DATA		0x17C 0x000 ALT1 0x0
+#define VF610_PAD_PTB25__UART1_RTS		0x17C 0x000 ALT2 0x0
+#define VF610_PAD_PTB25__SRC_RCON20		0x17C 0x3A0 ALT3 0x1
+#define VF610_PAD_PTB25__FB_CS1_B		0x17C 0x000 ALT4 0x0
+#define VF610_PAD_PTB25__NF_CE0_B		0x17C 0x000 ALT5 0x0
+#define VF610_PAD_PTB25__DCU1_G5		0x17C 0x000 ALT7 0x0
+#define VF610_PAD_PTB26__GPIO_96		0x180 0x000 ALT0 0x0
+#define VF610_PAD_PTB26__SAI0_TX_DATA		0x180 0x000 ALT1 0x0
+#define VF610_PAD_PTB26__UART1_CTS		0x180 0x378 ALT2 0x2
+#define VF610_PAD_PTB26__SRC_RCON21		0x180 0x000 ALT3 0x0
+#define VF610_PAD_PTB26__FB_CS0_B		0x180 0x000 ALT4 0x0
+#define VF610_PAD_PTB26__NF_CE1_B		0x180 0x000 ALT5 0x0
+#define VF610_PAD_PTB26__DCU1_G6		0x180 0x000 ALT7 0x0
+#define VF610_PAD_PTB27__GPIO_97		0x184 0x000 ALT0 0x0
+#define VF610_PAD_PTB27__SAI0_RX_SYNC		0x184 0x000 ALT1 0x0
+#define VF610_PAD_PTB27__SRC_RCON22		0x184 0x000 ALT3 0x0
+#define VF610_PAD_PTB27__FB_OE_B		0x184 0x000 ALT4 0x0
+#define VF610_PAD_PTB27__FB_MUXED_TBST_B	0x184 0x000 ALT5 0x0
+#define VF610_PAD_PTB27__NF_RE_B		0x184 0x000 ALT6 0x0
+#define VF610_PAD_PTB27__DCU1_G7		0x184 0x000 ALT7 0x0
+#define VF610_PAD_PTB28__GPIO_98		0x188 0x000 ALT0 0x0
+#define VF610_PAD_PTB28__SAI0_TX_SYNC		0x188 0x000 ALT1 0x0
+#define VF610_PAD_PTB28__SRC_RCON23		0x188 0x000 ALT3 0x0
+#define VF610_PAD_PTB28__FB_RW_B		0x188 0x000 ALT4 0x0
+#define VF610_PAD_PTB28__DCU1_B6		0x188 0x000 ALT7 0x0
+#define VF610_PAD_PTC26__GPIO_99		0x18C 0x000 ALT0 0x0
+#define VF610_PAD_PTC26__SAI1_TX_BCLK		0x18C 0x000 ALT1 0x0
+#define VF610_PAD_PTC26__DSPI0_CS5		0x18C 0x000 ALT2 0x0
+#define VF610_PAD_PTC26__SRC_RCON24		0x18C 0x000 ALT3 0x0
+#define VF610_PAD_PTC26__FB_TA_B		0x18C 0x000 ALT4 0x0
+#define VF610_PAD_PTC26__NF_RB_B		0x18C 0x000 ALT5 0x0
+#define VF610_PAD_PTC26__DCU1_B7		0x18C 0x000 ALT7 0x0
+#define VF610_PAD_PTC27__GPIO_100		0x190 0x000 ALT0 0x0
+#define VF610_PAD_PTC27__SAI1_RX_BCLK		0x190 0x000 ALT1 0x0
+#define VF610_PAD_PTC27__DSPI0_CS4		0x190 0x000 ALT2 0x0
+#define VF610_PAD_PTC27__SRC_RCON25		0x190 0x000 ALT3 0x0
+#define VF610_PAD_PTC27__FB_BE3_B		0x190 0x000 ALT4 0x0
+#define VF610_PAD_PTC27__FB_CS3_B		0x190 0x000 ALT5 0x0
+#define VF610_PAD_PTC27__NF_ALE			0x190 0x000 ALT6 0x0
+#define VF610_PAD_PTC27__DCU1_B2		0x190 0x000 ALT7 0x0
+#define VF610_PAD_PTC28__GPIO_101		0x194 0x000 ALT0 0x0
+#define VF610_PAD_PTC28__SAI1_RX_DATA		0x194 0x000 ALT1 0x0
+#define VF610_PAD_PTC28__DSPI0_CS3		0x194 0x000 ALT2 0x0
+#define VF610_PAD_PTC28__SRC_RCON26		0x194 0x000 ALT3 0x0
+#define VF610_PAD_PTC28__FB_BE2_B		0x194 0x000 ALT4 0x0
+#define VF610_PAD_PTC28__FB_CS2_B		0x194 0x000 ALT5 0x0
+#define VF610_PAD_PTC28__NF_CLE			0x194 0x000 ALT6 0x0
+#define VF610_PAD_PTC28__DCU1_B3		0x194 0x000 ALT7 0x0
+#define VF610_PAD_PTC29__GPIO_102		0x198 0x000 ALT0 0x0
+#define VF610_PAD_PTC29__SAI1_TX_DATA		0x198 0x000 ALT1 0x0
+#define VF610_PAD_PTC29__DSPI0_CS2		0x198 0x000 ALT2 0x0
+#define VF610_PAD_PTC29__SRC_RCON27		0x198 0x000 ALT3 0x0
+#define VF610_PAD_PTC29__FB_BE1_B		0x198 0x000 ALT4 0x0
+#define VF610_PAD_PTC29__FB_MUXED_TSIZE1	0x198 0x000 ALT5 0x0
+#define VF610_PAD_PTC29__DCU1_B4		0x198 0x000 ALT7 0x0
+#define VF610_PAD_PTC30__GPIO_103		0x19C 0x000 ALT0 0x0
+#define VF610_PAD_PTC30__SAI1_RX_SYNC		0x19C 0x000 ALT1 0x0
+#define VF610_PAD_PTC30__DSPI1_CS2		0x19C 0x000 ALT2 0x0
+#define VF610_PAD_PTC30__SRC_RCON28		0x19C 0x000 ALT3 0x0
+#define VF610_PAD_PTC30__FB_MUXED_BE0_B		0x19C 0x000 ALT4 0x0
+#define VF610_PAD_PTC30__FB_TSIZ0		0x19C 0x000 ALT5 0x0
+#define VF610_PAD_PTC30__ADC0_SE5		0x19C 0x000 ALT6 0x0
+#define VF610_PAD_PTC30__DCU1_B5		0x19C 0x000 ALT7 0x0
+#define VF610_PAD_PTC31__GPIO_104		0x1A0 0x000 ALT0 0x0
+#define VF610_PAD_PTC31__SAI1_TX_SYNC		0x1A0 0x360 ALT1 0x1
+#define VF610_PAD_PTC31__SRC_RCON29		0x1A0 0x000 ALT3 0x0
+#define VF610_PAD_PTC31__ADC1_SE5		0x1A0 0x000 ALT6 0x0
+#define VF610_PAD_PTC31__DCU1_B6		0x1A0 0x000 ALT7 0x0
+#define VF610_PAD_PTE0__GPIO_105		0x1A4 0x000 ALT0 0x0
+#define VF610_PAD_PTE0__DCU0_HSYNC		0x1A4 0x000 ALT1 0x0
+#define VF610_PAD_PTE0__SRC_BMODE1		0x1A4 0x000 ALT2 0x0
+#define VF610_PAD_PTE0__LCD0			0x1A4 0x000 ALT4 0x0
+#define VF610_PAD_PTE0__DEBUG_OUT29		0x1A4 0x000 ALT7 0x0
+#define VF610_PAD_PTE1__GPIO_106		0x1A8 0x000 ALT0 0x0
+#define VF610_PAD_PTE1__DCU0_VSYNC		0x1A8 0x000 ALT1 0x0
+#define VF610_PAD_PTE1__SRC_BMODE0		0x1A8 0x000 ALT2 0x0
+#define VF610_PAD_PTE1__LCD1			0x1A8 0x000 ALT4 0x0
+#define VF610_PAD_PTE1__DEBUG_OUT30		0x1A8 0x000 ALT7 0x0
+#define VF610_PAD_PTE2__GPIO_107		0x1AC 0x000 ALT0 0x0
+#define VF610_PAD_PTE2__DCU0_PCLK		0x1AC 0x000 ALT1 0x0
+#define VF610_PAD_PTE2__LCD2			0x1AC 0x000 ALT4 0x0
+#define VF610_PAD_PTE2__DEBUG_OUT31		0x1AC 0x000 ALT7 0x0
+#define VF610_PAD_PTE3__GPIO_108		0x1B0 0x000 ALT0 0x0
+#define VF610_PAD_PTE3__DCU0_TAG		0x1B0 0x000 ALT1 0x0
+#define VF610_PAD_PTE3__LCD3			0x1B0 0x000 ALT4 0x0
+#define VF610_PAD_PTE3__DEBUG_OUT32		0x1B0 0x000 ALT7 0x0
+#define VF610_PAD_PTE4__GPIO_109		0x1B4 0x000 ALT0 0x0
+#define VF610_PAD_PTE4__DCU0_DE			0x1B4 0x000 ALT1 0x0
+#define VF610_PAD_PTE4__LCD4			0x1B4 0x000 ALT4 0x0
+#define VF610_PAD_PTE4__DEBUG_OUT33		0x1B4 0x000 ALT7 0x0
+#define VF610_PAD_PTE5__GPIO_110		0x1B8 0x000 ALT0 0x0
+#define VF610_PAD_PTE5__DCU0_R0			0x1B8 0x000 ALT1 0x0
+#define VF610_PAD_PTE5__LCD5			0x1B8 0x000 ALT4 0x0
+#define VF610_PAD_PTE5__DEBUG_OUT34		0x1B8 0x000 ALT7 0x0
+#define VF610_PAD_PTE6__GPIO_111		0x1BC 0x000 ALT0 0x0
+#define VF610_PAD_PTE6__DCU0_R1			0x1BC 0x000 ALT1 0x0
+#define VF610_PAD_PTE6__LCD6			0x1BC 0x000 ALT4 0x0
+#define VF610_PAD_PTE6__DEBUG_OUT35		0x1BC 0x000 ALT7 0x0
+#define VF610_PAD_PTE7__GPIO_112		0x1C0 0x000 ALT0 0x0
+#define VF610_PAD_PTE7__DCU0_R2			0x1C0 0x000 ALT1 0x0
+#define VF610_PAD_PTE7__SRC_RCON0		0x1C0 0x000 ALT3 0x0
+#define VF610_PAD_PTE7__LCD7			0x1C0 0x000 ALT4 0x0
+#define VF610_PAD_PTE7__DEBUG_OUT36		0x1C0 0x000 ALT7 0x0
+#define VF610_PAD_PTE8__GPIO_113		0x1C4 0x000 ALT0 0x0
+#define VF610_PAD_PTE8__DCU0_R3			0x1C4 0x000 ALT1 0x0
+#define VF610_PAD_PTE8__SRC_RCON1		0x1C4 0x000 ALT3 0x0
+#define VF610_PAD_PTE8__LCD8			0x1C4 0x000 ALT4 0x0
+#define VF610_PAD_PTE8__DEBUG_OUT37		0x1C4 0x000 ALT7 0x0
+#define VF610_PAD_PTE9__GPIO_114		0x1C8 0x000 ALT0 0x0
+#define VF610_PAD_PTE9__DCU0_R4			0x1C8 0x000 ALT1 0x0
+#define VF610_PAD_PTE9__SRC_RCON2		0x1C8 0x000 ALT3 0x0
+#define VF610_PAD_PTE9__LCD9			0x1C8 0x000 ALT4 0x0
+#define VF610_PAD_PTE9__DEBUG_OUT38		0x1C8 0x000 ALT7 0x0
+#define VF610_PAD_PTE10__GPIO_115		0x1CC 0x000 ALT0 0x0
+#define VF610_PAD_PTE10__DCU0_R5		0x1CC 0x000 ALT1 0x0
+#define VF610_PAD_PTE10__SRC_RCON3		0x1CC 0x000 ALT3 0x0
+#define VF610_PAD_PTE10__LCD10			0x1CC 0x000 ALT4 0x0
+#define VF610_PAD_PTE10__DEBUG_OUT39		0x1CC 0x000 ALT7 0x0
+#define VF610_PAD_PTE11__GPIO_116		0x1D0 0x000 ALT0 0x0
+#define VF610_PAD_PTE11__DCU0_R6		0x1D0 0x000 ALT1 0x0
+#define VF610_PAD_PTE11__SRC_RCON4		0x1D0 0x000 ALT3 0x0
+#define VF610_PAD_PTE11__LCD11			0x1D0 0x000 ALT4 0x0
+#define VF610_PAD_PTE11__DEBUG_OUT40		0x1D0 0x000 ALT7 0x0
+#define VF610_PAD_PTE12__GPIO_117		0x1D4 0x000 ALT0 0x0
+#define VF610_PAD_PTE12__DCU0_R7		0x1D4 0x000 ALT1 0x0
+#define VF610_PAD_PTE12__DSPI1_CS3		0x1D4 0x000 ALT2 0x0
+#define VF610_PAD_PTE12__SRC_RCON5		0x1D4 0x000 ALT3 0x0
+#define VF610_PAD_PTE12__LCD12			0x1D4 0x000 ALT4 0x0
+#define VF610_PAD_PTE12__LPT_ALT0		0x1D4 0x000 ALT7 0x0
+#define VF610_PAD_PTE13__GPIO_118		0x1D8 0x000 ALT0 0x0
+#define VF610_PAD_PTE13__DCU0_G0		0x1D8 0x000 ALT1 0x0
+#define VF610_PAD_PTE13__LCD13			0x1D8 0x000 ALT4 0x0
+#define VF610_PAD_PTE13__DEBUG_OUT41		0x1D8 0x000 ALT7 0x0
+#define VF610_PAD_PTE14__GPIO_119		0x1DC 0x000 ALT0 0x0
+#define VF610_PAD_PTE14__DCU0_G1		0x1DC 0x000 ALT1 0x0
+#define VF610_PAD_PTE14__LCD14			0x1DC 0x000 ALT4 0x0
+#define VF610_PAD_PTE14__DEBUG_OUT42		0x1DC 0x000 ALT7 0x0
+#define VF610_PAD_PTE15__GPIO_120		0x1E0 0x000 ALT0 0x0
+#define VF610_PAD_PTE15__DCU0_G2		0x1E0 0x000 ALT1 0x0
+#define VF610_PAD_PTE15__SRC_RCON6		0x1E0 0x000 ALT3 0x0
+#define VF610_PAD_PTE15__LCD15			0x1E0 0x000 ALT4 0x0
+#define VF610_PAD_PTE15__DEBUG_OUT43		0x1E0 0x000 ALT7 0x0
+#define VF610_PAD_PTE16__GPIO_121		0x1E4 0x000 ALT0 0x0
+#define VF610_PAD_PTE16__DCU0_G3		0x1E4 0x000 ALT1 0x0
+#define VF610_PAD_PTE16__SRC_RCON7		0x1E4 0x000 ALT3 0x0
+#define VF610_PAD_PTE16__LCD16			0x1E4 0x000 ALT4 0x0
+#define VF610_PAD_PTE17__GPIO_122		0x1E8 0x000 ALT0 0x0
+#define VF610_PAD_PTE17__DCU0_G4		0x1E8 0x000 ALT1 0x0
+#define VF610_PAD_PTE17__SRC_RCON8		0x1E8 0x000 ALT3 0x0
+#define VF610_PAD_PTE17__LCD17			0x1E8 0x000 ALT4 0x0
+#define VF610_PAD_PTE18__GPIO_123		0x1EC 0x000 ALT0 0x0
+#define VF610_PAD_PTE18__DCU0_G5		0x1EC 0x000 ALT1 0x0
+#define VF610_PAD_PTE18__SRC_RCON9		0x1EC 0x000 ALT3 0x0
+#define VF610_PAD_PTE18__LCD18			0x1EC 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__GPIO_124		0x1F0 0x000 ALT0 0x0
+#define VF610_PAD_PTE19__DCU0_G6		0x1F0 0x000 ALT1 0x0
+#define VF610_PAD_PTE19__SRC_RCON10		0x1F0 0x000 ALT3 0x0
+#define VF610_PAD_PTE19__LCD19			0x1F0 0x000 ALT4 0x0
+#define VF610_PAD_PTE19__I2C0_SCL		0x1F0 0x33C ALT5 0x3
+#define VF610_PAD_PTE20__GPIO_125		0x1F4 0x000 ALT0 0x0
+#define VF610_PAD_PTE20__DCU0_G7		0x1F4 0x000 ALT1 0x0
+#define VF610_PAD_PTE20__SRC_RCON11		0x1F4 0x000 ALT3 0x0
+#define VF610_PAD_PTE20__LCD20			0x1F4 0x000 ALT4 0x0
+#define VF610_PAD_PTE20__I2C0_SDA		0x1F4 0x340 ALT5 0x3
+#define VF610_PAD_PTE20__EWM_IN			0x1F4 0x000 ALT7 0x0
+#define VF610_PAD_PTE21__GPIO_126		0x1F8 0x000 ALT0 0x0
+#define VF610_PAD_PTE21__DCU0_B0		0x1F8 0x000 ALT1 0x0
+#define VF610_PAD_PTE21__LCD21			0x1F8 0x000 ALT4 0x0
+#define VF610_PAD_PTE22__GPIO_127		0x1FC 0x000 ALT0 0x0
+#define VF610_PAD_PTE22__DCU0_B1		0x1FC 0x000 ALT1 0x0
+#define VF610_PAD_PTE22__LCD22			0x1FC 0x000 ALT4 0x0
+#define VF610_PAD_PTE23__GPIO_128		0x200 0x000 ALT0 0x0
+#define VF610_PAD_PTE23__DCU0_B2		0x200 0x000 ALT1 0x0
+#define VF610_PAD_PTE23__SRC_RCON12		0x200 0x000 ALT3 0x0
+#define VF610_PAD_PTE23__LCD23			0x200 0x000 ALT4 0x0
+#define VF610_PAD_PTE24__GPIO_129		0x204 0x000 ALT0 0x0
+#define VF610_PAD_PTE24__DCU0_B3		0x204 0x000 ALT1 0x0
+#define VF610_PAD_PTE24__SRC_RCON13		0x204 0x000 ALT3 0x0
+#define VF610_PAD_PTE24__LCD24			0x204 0x000 ALT4 0x0
+#define VF610_PAD_PTE25__GPIO_130		0x208 0x000 ALT0 0x0
+#define VF610_PAD_PTE25__DCU0_B4		0x208 0x000 ALT1 0x0
+#define VF610_PAD_PTE25__SRC_RCON14		0x208 0x000 ALT3 0x0
+#define VF610_PAD_PTE25__LCD25			0x208 0x000 ALT4 0x0
+#define VF610_PAD_PTE26__GPIO_131		0x20C 0x000 ALT0 0x0
+#define VF610_PAD_PTE26__DCU0_B5		0x20C 0x000 ALT1 0x0
+#define VF610_PAD_PTE26__SRC_RCON15		0x20C 0x000 ALT3 0x0
+#define VF610_PAD_PTE26__LCD26			0x20C 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__GPIO_132		0x210 0x000 ALT0 0x0
+#define VF610_PAD_PTE27__DCU0_B6		0x210 0x000 ALT1 0x0
+#define VF610_PAD_PTE27__SRC_RCON16		0x210 0x000 ALT3 0x0
+#define VF610_PAD_PTE27__LCD27			0x210 0x000 ALT4 0x0
+#define VF610_PAD_PTE27__I2C1_SCL		0x210 0x344 ALT5 0x3
+#define VF610_PAD_PTE28__GPIO_133		0x214 0x000 ALT0 0x0
+#define VF610_PAD_PTE28__DCU0_B7		0x214 0x000 ALT1 0x0
+#define VF610_PAD_PTE28__SRC_RCON17		0x214 0x000 ALT3 0x0
+#define VF610_PAD_PTE28__LCD28			0x214 0x000 ALT4 0x0
+#define VF610_PAD_PTE28__I2C1_SDA		0x214 0x348 ALT5 0x3
+#define VF610_PAD_PTE28__EWM_OUT		0x214 0x000 ALT7 0x0
+#define VF610_PAD_PTA7__GPIO_134		0x218 0x000 ALT0 0x0
+#define VF610_PAD_PTA7__VIU_PIX_CLK		0x218 0x3AC ALT1 0x1
+
+#endif
diff --git a/src/arm/vf610-twr.dts b/src/arm/vf610-twr.dts
new file mode 100644
index 000000000000..f64fddce3e2a
--- /dev/null
+++ b/src/arm/vf610-twr.dts
@@ -0,0 +1,326 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "VF610 Tower Board";
+	compatible = "fsl,vf610-twr", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP1,115200";
+	};
+
+	memory {
+		reg = <0x80000000 0x8000000>;
+	};
+
+	audio_ext: mclk_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	enet_ext: eth_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vcc_3v3_mcu: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "vcc_3v3_mcu";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker Ext",
+			"Line", "Line In Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"Microphone Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"Speaker Ext", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+			frame-master;
+			bitclock-master;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			frame-master;
+			bitclock-master;
+		};
+	};
+};
+
+&adc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+	clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+};
+
+&dspi0 {
+	bus-num = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi0>;
+	status = "okay";
+
+	sflash: at26df081a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at26df081a";
+		spi-max-frequency = <16000000>;
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec0 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+	       #sound-dai-cells = <0>;
+	       compatible = "fsl,sgtl5000";
+	       reg = <0x0a>;
+	       VDDA-supply = <&reg_3p3v>;
+	       VDDIO-supply = <&reg_3p3v>;
+	       clocks = <&clks VF610_CLK_SAI2>;
+       };
+};
+
+&iomuxc {
+	vf610-twr {
+		pinctrl_adc0_ad5: adc0ad5grp {
+			fsl,pins = <
+				VF610_PAD_PTC30__ADC0_SE5		0xa1
+			>;
+		};
+
+		pinctrl_dspi0: dspi0grp {
+			fsl,pins = <
+				VF610_PAD_PTB19__DSPI0_CS0		0x1182
+				VF610_PAD_PTB20__DSPI0_SIN		0x1181
+				VF610_PAD_PTB21__DSPI0_SOUT		0x1182
+				VF610_PAD_PTB22__DSPI0_SCK		0x1182
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTA7__GPIO_134	0x219d
+			>;
+		};
+
+		pinctrl_fec0: fec0grp {
+			fsl,pins = <
+				VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+				VF610_PAD_PTC0__ENET_RMII0_MDC		0x30d3
+				VF610_PAD_PTC1__ENET_RMII0_MDIO		0x30d1
+				VF610_PAD_PTC2__ENET_RMII0_CRS		0x30d1
+				VF610_PAD_PTC3__ENET_RMII0_RXD1		0x30d1
+				VF610_PAD_PTC4__ENET_RMII0_RXD0		0x30d1
+				VF610_PAD_PTC5__ENET_RMII0_RXER		0x30d1
+				VF610_PAD_PTC6__ENET_RMII0_TXD1		0x30d2
+				VF610_PAD_PTC7__ENET_RMII0_TXD0		0x30d2
+				VF610_PAD_PTC8__ENET_RMII0_TXEN		0x30d2
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_i2c0: i2c0grp {
+			fsl,pins = <
+				VF610_PAD_PTB14__I2C0_SCL		0x30d3
+				VF610_PAD_PTB15__I2C0_SDA		0x30d3
+			>;
+		};
+
+		pinctrl_pwm0: pwm0grp {
+			fsl,pins = <
+				VF610_PAD_PTB0__FTM0_CH0		0x1582
+				VF610_PAD_PTB1__FTM0_CH1		0x1582
+				VF610_PAD_PTB2__FTM0_CH2		0x1582
+				VF610_PAD_PTB3__FTM0_CH3		0x1582
+			>;
+		};
+
+		pinctrl_sai2: sai2grp {
+			fsl,pins = <
+				VF610_PAD_PTA16__SAI2_TX_BCLK		0x02ed
+				VF610_PAD_PTA18__SAI2_TX_DATA		0x02ee
+				VF610_PAD_PTA19__SAI2_TX_SYNC		0x02ed
+				VF610_PAD_PTA21__SAI2_RX_BCLK		0x02ed
+				VF610_PAD_PTA22__SAI2_RX_DATA		0x02ed
+				VF610_PAD_PTA23__SAI2_RX_SYNC		0x02ed
+				VF610_PAD_PTB18__EXT_AUDIO_MCLK		0x02ed
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTB6__UART2_TX		0x21a2
+				VF610_PAD_PTB7__UART2_RX		0x21a1
+			>;
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0>;
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbdev0 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbmisc0 {
+	status = "okay";
+};
+
+&usbmisc1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/src/arm/vf610.dtsi b/src/arm/vf610.dtsi
index 583dd363c9dc..5f8eb1bd782b 100644
--- a/src/arm/vf610.dtsi
+++ b/src/arm/vf610.dtsi
@@ -7,427 +7,19 @@
  * (at your option) any later version.
  */
 
-#include "skeleton.dtsi"
-#include "vf610-pinfunc.h"
-#include <dt-bindings/clock/vf610-clock.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "vf500.dtsi"
 
-/ {
-	aliases {
-		can0 = &can0;
-		can1 = &can1;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a5";
-			device_type = "cpu";
-			reg = <0x0>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sxosc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-
-		fxosc {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		aips0: aips-bus@40000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&intc>;
-			reg = <0x40000000 0x70000>;
-			ranges;
-
-			intc: interrupt-controller@40002000 {
-				compatible = "arm,cortex-a9-gic";
-				#interrupt-cells = <3>;
-				interrupt-controller;
-				reg = <0x40003000 0x1000>,
-				      <0x40002100 0x100>;
-			};
-
-			L2: l2-cache@40006000 {
-				compatible = "arm,pl310-cache";
-				reg = <0x40006000 0x1000>;
-				cache-unified;
-				cache-level = <2>;
-				arm,data-latency = <1 1 1>;
-				arm,tag-latency = <2 2 2>;
-			};
-
-			edma0: dma-controller@40018000 {
-				#dma-cells = <2>;
-				compatible = "fsl,vf610-edma";
-				reg = <0x40018000 0x2000>,
-					<0x40024000 0x1000>,
-					<0x40025000 0x1000>;
-				interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
-						<0 9 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "edma-tx", "edma-err";
-				dma-channels = <32>;
-				clock-names = "dmamux0", "dmamux1";
-				clocks = <&clks VF610_CLK_DMAMUX0>,
-					<&clks VF610_CLK_DMAMUX1>;
-			};
-
-			can0: flexcan@40020000 {
-				compatible = "fsl,vf610-flexcan";
-				reg = <0x40020000 0x4000>;
-				interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_FLEXCAN0>,
-					 <&clks VF610_CLK_FLEXCAN0>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart0: serial@40027000 {
-				compatible = "fsl,vf610-lpuart";
-				reg = <0x40027000 0x1000>;
-				interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_UART0>;
-				clock-names = "ipg";
-				dmas = <&edma0 0 2>,
-					<&edma0 0 3>;
-				dma-names = "rx","tx";
-				status = "disabled";
-			};
-
-			uart1: serial@40028000 {
-				compatible = "fsl,vf610-lpuart";
-				reg = <0x40028000 0x1000>;
-				interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_UART1>;
-				clock-names = "ipg";
-				dmas = <&edma0 0 4>,
-					<&edma0 0 5>;
-				dma-names = "rx","tx";
-				status = "disabled";
-			};
-
-			uart2: serial@40029000 {
-				compatible = "fsl,vf610-lpuart";
-				reg = <0x40029000 0x1000>;
-				interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_UART2>;
-				clock-names = "ipg";
-				dmas = <&edma0 0 6>,
-					<&edma0 0 7>;
-				dma-names = "rx","tx";
-				status = "disabled";
-			};
-
-			uart3: serial@4002a000 {
-				compatible = "fsl,vf610-lpuart";
-				reg = <0x4002a000 0x1000>;
-				interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_UART3>;
-				clock-names = "ipg";
-				dmas = <&edma0 0 8>,
-					<&edma0 0 9>;
-				dma-names = "rx","tx";
-				status = "disabled";
-			};
-
-			dspi0: dspi0@4002c000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,vf610-dspi";
-				reg = <0x4002c000 0x1000>;
-				interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_DSPI0>;
-				clock-names = "dspi";
-				spi-num-chipselects = <5>;
-				status = "disabled";
-			};
-
-			sai2: sai@40031000 {
-				compatible = "fsl,vf610-sai";
-				reg = <0x40031000 0x1000>;
-				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_SAI2>;
-				clock-names = "sai";
-				dma-names = "tx", "rx";
-				dmas = <&edma0 0 21>,
-					<&edma0 0 20>;
-				status = "disabled";
-			};
-
-			pit: pit@40037000 {
-				compatible = "fsl,vf610-pit";
-				reg = <0x40037000 0x1000>;
-				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_PIT>;
-				clock-names = "pit";
-			};
-
-			pwm0: pwm@40038000 {
-				compatible = "fsl,vf610-ftm-pwm";
-				#pwm-cells = <3>;
-				reg = <0x40038000 0x1000>;
-				clock-names = "ftm_sys", "ftm_ext",
-					      "ftm_fix", "ftm_cnt_clk_en";
-				clocks = <&clks VF610_CLK_FTM0>,
-					<&clks VF610_CLK_FTM0_EXT_SEL>,
-					<&clks VF610_CLK_FTM0_FIX_SEL>,
-					<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
-				status = "disabled";
-			};
-
-			adc0: adc@4003b000 {
-				compatible = "fsl,vf610-adc";
-				reg = <0x4003b000 0x1000>;
-				interrupts = <0 53 0x04>;
-				clocks = <&clks VF610_CLK_ADC0>;
-				clock-names = "adc";
-				status = "disabled";
-			};
-
-			wdog@4003e000 {
-				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
-				reg = <0x4003e000 0x1000>;
-				clocks = <&clks VF610_CLK_WDT>;
-				clock-names = "wdog";
-			};
-
-			qspi0: quadspi@40044000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,vf610-qspi";
-				reg = <0x40044000 0x1000>;
-				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_QSPI0_EN>,
-					<&clks VF610_CLK_QSPI0>;
-				clock-names = "qspi_en", "qspi";
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@40048000 {
-				compatible = "fsl,vf610-iomuxc";
-				reg = <0x40048000 0x1000>;
-				#gpio-range-cells = <3>;
-			};
-
-			gpio1: gpio@40049000 {
-				compatible = "fsl,vf610-gpio";
-				reg = <0x40049000 0x1000 0x400ff000 0x40>;
-				interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 0 32>;
-			};
-
-			gpio2: gpio@4004a000 {
-				compatible = "fsl,vf610-gpio";
-				reg = <0x4004a000 0x1000 0x400ff040 0x40>;
-				interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 32 32>;
-			};
-
-			gpio3: gpio@4004b000 {
-				compatible = "fsl,vf610-gpio";
-				reg = <0x4004b000 0x1000 0x400ff080 0x40>;
-				interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 64 32>;
-			};
-
-			gpio4: gpio@4004c000 {
-				compatible = "fsl,vf610-gpio";
-				reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
-				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 96 32>;
-			};
-
-			gpio5: gpio@4004d000 {
-				compatible = "fsl,vf610-gpio";
-				reg = <0x4004d000 0x1000 0x400ff100 0x40>;
-				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				gpio-ranges = <&iomuxc 0 128 7>;
-			};
-
-			anatop@40050000 {
-				compatible = "fsl,vf610-anatop";
-				reg = <0x40050000 0x1000>;
-			};
-
-			i2c0: i2c@40066000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,vf610-i2c";
-				reg = <0x40066000 0x1000>;
-				interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_I2C0>;
-				clock-names = "ipg";
-				dmas = <&edma0 0 50>,
-					<&edma0 0 51>;
-				dma-names = "rx","tx";
-				status = "disabled";
-			};
-
-			clks: ccm@4006b000 {
-				compatible = "fsl,vf610-ccm";
-				reg = <0x4006b000 0x1000>;
-				#clock-cells = <1>;
-			};
-		};
-
-		aips1: aips-bus@40080000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40080000 0x80000>;
-			ranges;
-
-			edma1: dma-controller@40098000 {
-				#dma-cells = <2>;
-				compatible = "fsl,vf610-edma";
-				reg = <0x40098000 0x2000>,
-					<0x400a1000 0x1000>,
-					<0x400a2000 0x1000>;
-				interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>,
-						<0 11 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "edma-tx", "edma-err";
-				dma-channels = <32>;
-				clock-names = "dmamux0", "dmamux1";
-				clocks = <&clks VF610_CLK_DMAMUX2>,
-					<&clks VF610_CLK_DMAMUX3>;
-			};
-
-			uart4: serial@400a9000 {
-				compatible = "fsl,vf610-lpuart";
-				reg = <0x400a9000 0x1000>;
-				interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_UART4>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-
-			uart5: serial@400aa000 {
-				compatible = "fsl,vf610-lpuart";
-				reg = <0x400aa000 0x1000>;
-				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_UART5>;
-				clock-names = "ipg";
-				status = "disabled";
-			};
-
-			adc1: adc@400bb000 {
-				compatible = "fsl,vf610-adc";
-				reg = <0x400bb000 0x1000>;
-				interrupts = <0 54 0x04>;
-				clocks = <&clks VF610_CLK_ADC1>;
-				clock-names = "adc";
-				status = "disabled";
-			};
-
-			esdhc1: esdhc@400b2000 {
-				compatible = "fsl,imx53-esdhc";
-				reg = <0x400b2000 0x1000>;
-				interrupts = <0 28 0x04>;
-				clocks = <&clks VF610_CLK_IPG_BUS>,
-					<&clks VF610_CLK_PLATFORM_BUS>,
-					<&clks VF610_CLK_ESDHC1>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			ftm: ftm@400b8000 {
-				compatible = "fsl,ftm-timer";
-				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
-				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
-				clock-names = "ftm-evt", "ftm-src",
-					"ftm-evt-counter-en", "ftm-src-counter-en";
-				clocks = <&clks VF610_CLK_FTM2>,
-					<&clks VF610_CLK_FTM3>,
-					<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
-					<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
-				status = "disabled";
-			};
-
-			fec0: ethernet@400d0000 {
-				compatible = "fsl,mvf600-fec";
-				reg = <0x400d0000 0x1000>;
-				interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_ENET0>,
-					<&clks VF610_CLK_ENET0>,
-					<&clks VF610_CLK_ENET>;
-				clock-names = "ipg", "ahb", "ptp";
-				status = "disabled";
-			};
-
-			fec1: ethernet@400d1000 {
-				compatible = "fsl,mvf600-fec";
-				reg = <0x400d1000 0x1000>;
-				interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_ENET1>,
-					<&clks VF610_CLK_ENET1>,
-					<&clks VF610_CLK_ENET>;
-				clock-names = "ipg", "ahb", "ptp";
-				status = "disabled";
-			};
-
-			can1: flexcan@400d4000 {
-				compatible = "fsl,vf610-flexcan";
-				reg = <0x400d4000 0x4000>;
-				interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks VF610_CLK_FLEXCAN1>,
-					 <&clks VF610_CLK_FLEXCAN1>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
+&a5_cpu {
+	next-level-cache = <&L2>;
+};
 
-		};
+&aips0 {
+	L2: l2-cache@40006000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x40006000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <2 2 2>;
 	};
 };
diff --git a/src/arm/vfxxx.dtsi b/src/arm/vfxxx.dtsi
new file mode 100644
index 000000000000..a29c7ce15eaf
--- /dev/null
+++ b/src/arm/vfxxx.dtsi
@@ -0,0 +1,463 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "vf610-pinfunc.h"
+#include <dt-bindings/clock/vf610-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		can0 = &can0;
+		can1 = &can1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		usbphy0 = &usbphy0;
+		usbphy1 = &usbphy1;
+	};
+
+	fxosc: fxosc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	sxosc: sxosc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	reboot: syscon-reboot {
+		compatible = "syscon-reboot";
+		regmap = <&src>;
+		offset = <0x0>;
+		mask = <0x1000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aips0: aips-bus@40000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edma0: dma-controller@40018000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40018000 0x2000>,
+					<0x40024000 0x1000>,
+					<0x40025000 0x1000>;
+				dma-channels = <32>;
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX0>,
+					<&clks VF610_CLK_DMAMUX1>;
+				status = "disabled";
+			};
+
+			can0: flexcan@40020000 {
+				compatible = "fsl,vf610-flexcan";
+				reg = <0x40020000 0x4000>;
+				clocks = <&clks VF610_CLK_FLEXCAN0>,
+					 <&clks VF610_CLK_FLEXCAN0>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart0: serial@40027000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40027000 0x1000>;
+				clocks = <&clks VF610_CLK_UART0>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 2>,
+					<&edma0 0 3>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart1: serial@40028000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40028000 0x1000>;
+				clocks = <&clks VF610_CLK_UART1>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 4>,
+					<&edma0 0 5>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart2: serial@40029000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x40029000 0x1000>;
+				clocks = <&clks VF610_CLK_UART2>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 6>,
+					<&edma0 0 7>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			uart3: serial@4002a000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x4002a000 0x1000>;
+				clocks = <&clks VF610_CLK_UART3>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 8>,
+					<&edma0 0 9>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			dspi0: dspi0@4002c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-dspi";
+				reg = <0x4002c000 0x1000>;
+				clocks = <&clks VF610_CLK_DSPI0>;
+				clock-names = "dspi";
+				spi-num-chipselects = <5>;
+				status = "disabled";
+			};
+
+			sai2: sai@40031000 {
+				compatible = "fsl,vf610-sai";
+				reg = <0x40031000 0x1000>;
+				clocks = <&clks VF610_CLK_SAI2>;
+				clock-names = "sai";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 21>,
+					<&edma0 0 20>;
+				status = "disabled";
+			};
+
+			pit: pit@40037000 {
+				compatible = "fsl,vf610-pit";
+				reg = <0x40037000 0x1000>;
+				clocks = <&clks VF610_CLK_PIT>;
+				clock-names = "pit";
+			};
+
+			pwm0: pwm@40038000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				#pwm-cells = <3>;
+				reg = <0x40038000 0x1000>;
+				clock-names = "ftm_sys", "ftm_ext",
+					      "ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks VF610_CLK_FTM0>,
+					<&clks VF610_CLK_FTM0_EXT_SEL>,
+					<&clks VF610_CLK_FTM0_FIX_SEL>,
+					<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			pwm1: pwm@40039000 {
+				compatible = "fsl,vf610-ftm-pwm";
+				#pwm-cells = <3>;
+				reg = <0x40039000 0x1000>;
+				clock-names = "ftm_sys", "ftm_ext",
+					      "ftm_fix", "ftm_cnt_clk_en";
+				clocks = <&clks VF610_CLK_FTM1>,
+					<&clks VF610_CLK_FTM1_EXT_SEL>,
+					<&clks VF610_CLK_FTM1_FIX_SEL>,
+					<&clks VF610_CLK_FTM1_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			adc0: adc@4003b000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x4003b000 0x1000>;
+				clocks = <&clks VF610_CLK_ADC0>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			wdoga5: wdog@4003e000 {
+				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
+				reg = <0x4003e000 0x1000>;
+				clocks = <&clks VF610_CLK_WDT>;
+				clock-names = "wdog";
+				status = "disabled";
+			};
+
+			qspi0: quadspi@40044000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-qspi";
+				reg = <0x40044000 0x1000>;
+				clocks = <&clks VF610_CLK_QSPI0_EN>,
+					<&clks VF610_CLK_QSPI0>;
+				clock-names = "qspi_en", "qspi";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@40048000 {
+				compatible = "fsl,vf610-iomuxc";
+				reg = <0x40048000 0x1000>;
+				#gpio-range-cells = <3>;
+			};
+
+			gpio0: gpio@40049000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x40049000 0x1000 0x400ff000 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 0 32>;
+			};
+
+			gpio1: gpio@4004a000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004a000 0x1000 0x400ff040 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 32 32>;
+			};
+
+			gpio2: gpio@4004b000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004b000 0x1000 0x400ff080 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 64 32>;
+			};
+
+			gpio3: gpio@4004c000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 96 32>;
+			};
+
+			gpio4: gpio@4004d000 {
+				compatible = "fsl,vf610-gpio";
+				reg = <0x4004d000 0x1000 0x400ff100 0x40>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 128 7>;
+			};
+
+			anatop: anatop@40050000 {
+				compatible = "fsl,vf610-anatop", "syscon";
+				reg = <0x40050000 0x400>;
+			};
+
+			usbphy0: usbphy@40050800 {
+				compatible = "fsl,vf610-usbphy";
+				reg = <0x40050800 0x400>;
+				clocks = <&clks VF610_CLK_USBPHY0>;
+				fsl,anatop = <&anatop>;
+				status = "disabled";
+			};
+
+			usbphy1: usbphy@40050c00 {
+				compatible = "fsl,vf610-usbphy";
+				reg = <0x40050c00 0x400>;
+				clocks = <&clks VF610_CLK_USBPHY1>;
+				fsl,anatop = <&anatop>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@40066000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,vf610-i2c";
+				reg = <0x40066000 0x1000>;
+				clocks = <&clks VF610_CLK_I2C0>;
+				clock-names = "ipg";
+				dmas = <&edma0 0 50>,
+					<&edma0 0 51>;
+				dma-names = "rx","tx";
+				status = "disabled";
+			};
+
+			clks: ccm@4006b000 {
+				compatible = "fsl,vf610-ccm";
+				reg = <0x4006b000 0x1000>;
+				clocks = <&sxosc>, <&fxosc>;
+				clock-names = "sxosc", "fxosc";
+				#clock-cells = <1>;
+			};
+
+			usbdev0: usb@40034000 {
+				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+				reg = <0x40034000 0x800>;
+				clocks = <&clks VF610_CLK_USBC0>;
+				fsl,usbphy = <&usbphy0>;
+				fsl,usbmisc = <&usbmisc0 0>;
+				dr_mode = "peripheral";
+				status = "disabled";
+			};
+
+			usbmisc0: usb@40034800 {
+				#index-cells = <1>;
+				compatible = "fsl,vf610-usbmisc";
+				reg = <0x40034800 0x200>;
+				clocks = <&clks VF610_CLK_USBC0>;
+				status = "disabled";
+			};
+
+			src: src@4006e000 {
+				compatible = "fsl,vf610-src", "syscon";
+				reg = <0x4006e000 0x1000>;
+			};
+		};
+
+		aips1: aips-bus@40080000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edma1: dma-controller@40098000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40098000 0x2000>,
+					<0x400a1000 0x1000>,
+					<0x400a2000 0x1000>;
+				dma-channels = <32>;
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX2>,
+					<&clks VF610_CLK_DMAMUX3>;
+				status = "disabled";
+			};
+
+			snvs0: snvs@400a7000 {
+			    compatible = "fsl,sec-v4.0-mon", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x400a7000 0x2000>;
+
+				snvsrtc: snvs-rtc-lp@34 {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					reg = <0x34 0x58>;
+					clocks = <&clks VF610_CLK_SNVS>;
+					clock-names = "snvs-rtc";
+				};
+			};
+
+			uart4: serial@400a9000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400a9000 0x1000>;
+				clocks = <&clks VF610_CLK_UART4>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			uart5: serial@400aa000 {
+				compatible = "fsl,vf610-lpuart";
+				reg = <0x400aa000 0x1000>;
+				clocks = <&clks VF610_CLK_UART5>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			adc1: adc@400bb000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x400bb000 0x1000>;
+				clocks = <&clks VF610_CLK_ADC1>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			esdhc1: esdhc@400b2000 {
+				compatible = "fsl,imx53-esdhc";
+				reg = <0x400b2000 0x1000>;
+				clocks = <&clks VF610_CLK_IPG_BUS>,
+					<&clks VF610_CLK_PLATFORM_BUS>,
+					<&clks VF610_CLK_ESDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			usbh1: usb@400b4000 {
+				compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+				reg = <0x400b4000 0x800>;
+				clocks = <&clks VF610_CLK_USBC1>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				dr_mode = "host";
+				status = "disabled";
+			};
+
+			usbmisc1: usb@400b4800 {
+				#index-cells = <1>;
+				compatible = "fsl,vf610-usbmisc";
+				reg = <0x400b4800 0x200>;
+				clocks = <&clks VF610_CLK_USBC1>;
+				status = "disabled";
+			};
+
+			ftm: ftm@400b8000 {
+				compatible = "fsl,ftm-timer";
+				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				clock-names = "ftm-evt", "ftm-src",
+					"ftm-evt-counter-en", "ftm-src-counter-en";
+				clocks = <&clks VF610_CLK_FTM2>,
+					<&clks VF610_CLK_FTM3>,
+					<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+					<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
+			fec0: ethernet@400d0000 {
+				compatible = "fsl,mvf600-fec";
+				reg = <0x400d0000 0x1000>;
+				clocks = <&clks VF610_CLK_ENET0>,
+					<&clks VF610_CLK_ENET0>,
+					<&clks VF610_CLK_ENET>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			fec1: ethernet@400d1000 {
+				compatible = "fsl,mvf600-fec";
+				reg = <0x400d1000 0x1000>;
+				clocks = <&clks VF610_CLK_ENET1>,
+					<&clks VF610_CLK_ENET1>,
+					<&clks VF610_CLK_ENET>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+
+			can1: flexcan@400d4000 {
+				compatible = "fsl,vf610-flexcan";
+				reg = <0x400d4000 0x4000>;
+				clocks = <&clks VF610_CLK_FLEXCAN1>,
+					 <&clks VF610_CLK_FLEXCAN1>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+		};
+	};
+};
diff --git a/src/arm/vt8500-bv07.dts b/src/arm/vt8500-bv07.dts
new file mode 100644
index 000000000000..87f33310e2bc
--- /dev/null
+++ b/src/arm/vt8500-bv07.dts
@@ -0,0 +1,36 @@
+/*
+ * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "vt8500.dtsi"
+
+/ {
+	model = "Benign BV07 Netbook";
+};
+
+&fb {
+	bits-per-pixel = <16>;
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/vt8500.dtsi b/src/arm/vt8500.dtsi
new file mode 100644
index 000000000000..1929ad390d88
--- /dev/null
+++ b/src/arm/vt8500.dtsi
@@ -0,0 +1,175 @@
+/*
+ * vt8500.dtsi - Device tree file for VIA VT8500 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "via,vt8500";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc>;
+
+		intc: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		pinctrl: pinctrl@d8110000 {
+			compatible = "via,vt8500-pinctrl";
+			reg = <0xd8110000 0x10000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clkuart2: uart2 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <3>;
+				};
+
+				clkuart3: uart3 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <4>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <43>;
+		};
+
+		fb: fb@d8050800 {
+			compatible = "via,vt8500-fb";
+			reg = <0xd800e400 0x400>;
+			interrupts = <12>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart0: serial@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&clkuart0>;
+			status = "disabled";
+		};
+
+		uart1: serial@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&clkuart1>;
+			status = "disabled";
+		};
+
+		uart2: serial@d8210000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8210000 0x1040>;
+			interrupts = <47>;
+			clocks = <&clkuart2>;
+			status = "disabled";
+		};
+
+		uart3: serial@d82c0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82c0000 0x1040>;
+			interrupts = <50>;
+			clocks = <&clkuart3>;
+			status = "disabled";
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+
+		ethernet@d8004000 {
+			compatible = "via,vt8500-rhine";
+			reg = <0xd8004000 0x100>;
+			interrupts = <10>;
+		};
+	};
+};
diff --git a/src/arm/wm8505-ref.dts b/src/arm/wm8505-ref.dts
new file mode 100644
index 000000000000..e3e6b9eb09d0
--- /dev/null
+++ b/src/arm/wm8505-ref.dts
@@ -0,0 +1,36 @@
+/*
+ * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8505.dtsi"
+
+/ {
+	model = "Wondermedia WM8505 Netbook";
+};
+
+&fb {
+	bits-per-pixel = <32>;
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/wm8505.dtsi b/src/arm/wm8505.dtsi
new file mode 100644
index 000000000000..a1a854b8a454
--- /dev/null
+++ b/src/arm/wm8505.dtsi
@@ -0,0 +1,290 @@
+/*
+ * wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "wm,wm8505";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+		};
+	};
+
+ 	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+ 	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		pinctrl: pinctrl@d8110000 {
+			compatible = "wm,wm8505-pinctrl";
+			reg = <0xd8110000 0x10000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				ref25: ref25M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <25000000>;
+				};
+
+				plla: plla {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x200>;
+				};
+
+				pllb: pllb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x204>;
+				};
+
+				pllc: pllc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x208>;
+				};
+
+				plld: plld {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x20c>;
+				};
+
+				clkarm: arm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plla>;
+					divisor-reg = <0x300>;
+				};
+
+				clkahb: ahb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x304>;
+				};
+
+				clkapb: apb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x350>;
+				};
+
+				clkddr: ddr {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plld>;
+					divisor-reg = <0x310>;
+				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clkuart2: uart2 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <3>;
+				};
+
+				clkuart3: uart3 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <4>;
+				};
+
+				clkuart4: uart4 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <22>;
+				};
+
+				clkuart5: uart5 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <23>;
+				};
+
+				clksdhc: sdhc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x328>;
+					divisor-mask = <0x3f>;
+					enable-reg = <0x254>;
+					enable-bit = <18>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007100 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007100 0x200>;
+			interrupts = <1>;
+		};
+
+		uhci@d8007300 {
+			compatible = "platform-uhci";
+			reg = <0xd8007300 0x200>;
+			interrupts = <0>;
+		};
+
+		fb: fb@d8050800 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8050800 0x200>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart0: serial@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&clkuart0>;
+			status = "disabled";
+		};
+
+		uart1: serial@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&clkuart1>;
+			status = "disabled";
+		};
+
+		uart2: serial@d8210000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8210000 0x1040>;
+			interrupts = <47>;
+			clocks = <&clkuart2>;
+			status = "disabled";
+		};
+
+		uart3: serial@d82c0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82c0000 0x1040>;
+			interrupts = <50>;
+			clocks = <&clkuart3>;
+			status = "disabled";
+		};
+
+		uart4: serial@d8370000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8370000 0x1040>;
+			interrupts = <31>;
+			clocks = <&clkuart4>;
+			status = "disabled";
+		};
+
+		uart5: serial@d8380000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8380000 0x1040>;
+			interrupts = <30>;
+			clocks = <&clkuart5>;
+			status = "disabled";
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x1000>;
+			interrupts = <20 21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+		};
+	};
+};
diff --git a/src/arm/wm8650-mid.dts b/src/arm/wm8650-mid.dts
new file mode 100644
index 000000000000..dd0d1b602388
--- /dev/null
+++ b/src/arm/wm8650-mid.dts
@@ -0,0 +1,37 @@
+/*
+ * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8650.dtsi"
+
+/ {
+	model = "Wondermedia WM8650-MID Tablet";
+};
+
+&fb {
+	bits-per-pixel = <16>;
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/wm8650.dtsi b/src/arm/wm8650.dtsi
new file mode 100644
index 000000000000..b1c59a766a13
--- /dev/null
+++ b/src/arm/wm8650.dtsi
@@ -0,0 +1,228 @@
+/*
+ * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "wm,wm8650";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+		};
+	};
+
+ 	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		pinctrl: pinctrl@d8110000 {
+			compatible = "wm,wm8650-pinctrl";
+			reg = <0xd8110000 0x10000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref25: ref25M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <25000000>;
+				};
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				plla: plla {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x200>;
+				};
+
+				pllb: pllb {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x204>;
+				};
+
+				pllc: pllc {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x208>;
+				};
+
+				plld: plld {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x20c>;
+				};
+
+				plle: plle {
+					#clock-cells = <0>;
+					compatible = "wm,wm8650-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x210>;
+				};
+
+				clkarm: arm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plla>;
+					divisor-reg = <0x300>;
+				};
+
+				clkahb: ahb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x304>;
+				};
+
+				clkapb: apb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x320>;
+				};
+
+				clkddr: ddr {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plld>;
+					divisor-reg = <0x310>;
+				};
+
+				clkuart0: uart0 {
+ 					#clock-cells = <0>;
+ 					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+ 				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clksdhc: sdhc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x328>;
+					divisor-mask = <0x3f>;
+					enable-reg = <0x254>;
+					enable-bit = <18>;
+				};
+			};
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <43>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <43>;
+		};
+
+		fb: fb@d8050800 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8050800 0x200>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		uart0: serial@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&clkuart0>;
+			status = "disabled";
+		};
+
+		uart1: serial@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&clkuart1>;
+			status = "disabled";
+		};
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+
+		ethernet@d8004000 {
+			compatible = "via,vt8500-rhine";
+			reg = <0xd8004000 0x100>;
+			interrupts = <10>;
+		};
+	};
+};
diff --git a/src/arm/wm8750-apc8750.dts b/src/arm/wm8750-apc8750.dts
new file mode 100644
index 000000000000..37e4a408bf39
--- /dev/null
+++ b/src/arm/wm8750-apc8750.dts
@@ -0,0 +1,30 @@
+/*
+ * wm8750-apc8750.dts
+ *  - Device tree file for VIA APC8750
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8750.dtsi"
+
+/ {
+	model = "VIA APC8750";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c>;
+
+	i2c: i2c {
+		wm,pins = <168 169 170 171>;
+		wm,function = <2>;	/* alt */
+		wm,pull = <2>;	/* pull-up */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/wm8750.dtsi b/src/arm/wm8750.dtsi
new file mode 100644
index 000000000000..557a9c2ace49
--- /dev/null
+++ b/src/arm/wm8750.dtsi
@@ -0,0 +1,347 @@
+/*
+ * wm8750.dtsi - Device tree file for Wondermedia WM8750 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "wm,wm8750";
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm1176ej-s";
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		pinctrl: pinctrl@d8110000 {
+			compatible = "wm,wm8750-pinctrl";
+			reg = <0xd8110000 0x10000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				ref25: ref25M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <25000000>;
+				};
+
+				plla: plla {
+					#clock-cells = <0>;
+					compatible = "wm,wm8750-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x200>;
+				};
+
+				pllb: pllb {
+					#clock-cells = <0>;
+					compatible = "wm,wm8750-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x204>;
+				};
+
+				pllc: pllc {
+					#clock-cells = <0>;
+					compatible = "wm,wm8750-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x208>;
+				};
+
+				plld: plld {
+					#clock-cells = <0>;
+					compatible = "wm,wm8750-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x20C>;
+				};
+
+				plle: plle {
+					#clock-cells = <0>;
+					compatible = "wm,wm8750-pll-clock";
+					clocks = <&ref25>;
+					reg = <0x210>;
+				};
+
+				clkarm: arm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plla>;
+					divisor-reg = <0x300>;
+				};
+
+				clkahb: ahb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x304>;
+				};
+
+				clkapb: apb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x320>;
+				};
+
+				clkddr: ddr {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plld>;
+					divisor-reg = <0x310>;
+				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x254>;
+					enable-bit = <24>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x254>;
+					enable-bit = <25>;
+				};
+
+                                clkuart2: uart2 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <26>;
+                                };
+
+                                clkuart3: uart3 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <27>;
+                                };
+
+                                clkuart4: uart4 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <28>;
+                                };
+
+                                clkuart5: uart5 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <29>;
+                                };
+
+				clkpwm: pwm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x350>;
+					enable-reg = <0x250>;
+					enable-bit = <17>;
+				};
+
+				clksdhc: sdhc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x330>;
+					divisor-mask = <0x3f>;
+					enable-reg = <0x250>;
+					enable-bit = <0>;
+				};
+
+				clki2c0: i2c0clk {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x3A0>;
+					enable-reg = <0x250>;
+					enable-bit = <8>;
+				};
+
+				clki2c1: i2c1clk {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x3A4>;
+					enable-reg = <0x250>;
+					enable-bit = <9>;
+				};
+			};
+		};
+
+		pwm: pwm@d8220000 {
+			#pwm-cells = <3>;
+			compatible = "via,vt8500-pwm";
+			reg = <0xd8220000 0x100>;
+			clocks = <&clkpwm>;
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <26>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <26>;
+		};
+
+		uhci@d8008d00 {
+			compatible = "platform-uhci";
+			reg = <0xd8008d00 0x200>;
+			interrupts = <26>;
+		};
+
+		uart0: serial@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&clkuart0>;
+			status = "disabled";
+		};
+
+		uart1: serial@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&clkuart1>;
+			status = "disabled";
+		};
+
+                uart2: serial@d8210000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd8210000 0x1040>;
+                        interrupts = <47>;
+                        clocks = <&clkuart2>;
+			status = "disabled";
+                };
+
+                uart3: serial@d82c0000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd82c0000 0x1040>;
+                        interrupts = <50>;
+                        clocks = <&clkuart3>;
+			status = "disabled";
+                };
+
+                uart4: serial@d8370000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd8370000 0x1040>;
+                        interrupts = <30>;
+                        clocks = <&clkuart4>;
+			status = "disabled";
+                };
+
+                uart5: serial@d8380000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd8380000 0x1040>;
+                        interrupts = <43>;
+                        clocks = <&clkuart5>;
+			status = "disabled";
+                };
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x1000>;
+			interrupts = <20 21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+			sdon-inverted;
+		};
+
+		i2c_0: i2c@d8280000 {
+			compatible = "wm,wm8505-i2c";
+			reg = <0xd8280000 0x1000>;
+			interrupts = <19>;
+			clocks = <&clki2c0>;
+			clock-frequency = <400000>;
+		};
+
+		i2c_1: i2c@d8320000 {
+			compatible = "wm,wm8505-i2c";
+			reg = <0xd8320000 0x1000>;
+			interrupts = <18>;
+			clocks = <&clki2c1>;
+			clock-frequency = <400000>;
+		};
+	};
+};
diff --git a/src/arm/wm8850-w70v2.dts b/src/arm/wm8850-w70v2.dts
new file mode 100644
index 000000000000..7a563d2523b0
--- /dev/null
+++ b/src/arm/wm8850-w70v2.dts
@@ -0,0 +1,48 @@
+/*
+ * wm8850-w70v2.dts
+ *  - Device tree file for Wondermedia WM8850 Tablet
+ *  - 'W70-V2' mainboard
+ *  - HongLianYing 'HLY070ML268-21A' 7" LCD panel
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/dts-v1/;
+/include/ "wm8850.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Wondermedia WM8850-W70v2 Tablet";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+
+		brightness-levels = <0 40 60 80 100 130 190 255>;
+		default-brightness-level = <5>;
+	};
+};
+
+&fb {
+	bits-per-pixel = <16>;
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 800x480 {
+			clock-frequency = <0>; /* unused but required */
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <88>;
+			hsync-len = <0>;
+			vback-porch = <32>;
+			vfront-porch = <11>;
+			vsync-len = <1>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm/wm8850.dtsi b/src/arm/wm8850.dtsi
new file mode 100644
index 000000000000..8fbccfbe75f3
--- /dev/null
+++ b/src/arm/wm8850.dtsi
@@ -0,0 +1,308 @@
+/*
+ * wm8850.dtsi - Device tree file for Wondermedia WM8850 SoC
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Licensed under GPLv2 or later
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "wm,wm8850";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&intc0>;
+
+		intc0: interrupt-controller@d8140000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			reg = <0xd8140000 0x10000>;
+			#interrupt-cells = <1>;
+		};
+
+		/* Secondary IC cascaded to intc0 */
+		intc1: interrupt-controller@d8150000 {
+			compatible = "via,vt8500-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0xD8150000 0x10000>;
+			interrupts = <56 57 58 59 60 61 62 63>;
+		};
+
+		pinctrl: pinctrl@d8110000 {
+			compatible = "wm,wm8850-pinctrl";
+			reg = <0xd8110000 0x10000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		pmc@d8130000 {
+			compatible = "via,vt8500-pmc";
+			reg = <0xd8130000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ref25: ref25M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <25000000>;
+				};
+
+				ref24: ref24M {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					clock-frequency = <24000000>;
+				};
+
+				plla: plla {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x200>;
+				};
+
+				pllb: pllb {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x204>;
+				};
+
+				pllc: pllc {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x208>;
+				};
+
+				plld: plld {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x20c>;
+				};
+
+				plle: plle {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x210>;
+				};
+
+				pllf: pllf {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x214>;
+				};
+
+				pllg: pllg {
+					#clock-cells = <0>;
+					compatible = "wm,wm8850-pll-clock";
+					clocks = <&ref24>;
+					reg = <0x218>;
+				};
+
+				clkarm: arm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plla>;
+					divisor-reg = <0x300>;
+				};
+
+				clkahb: ahb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x304>;
+				};
+
+				clkapb: apb {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x320>;
+				};
+
+				clkddr: ddr {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&plld>;
+					divisor-reg = <0x310>;
+				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x254>;
+					enable-bit = <24>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x254>;
+					enable-bit = <25>;
+				};
+
+                                clkuart2: uart2 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <26>;
+                                };
+
+                                clkuart3: uart3 {
+                                        #clock-cells = <0>;
+                                        compatible = "via,vt8500-device-clock";
+                                        clocks = <&ref24>;
+                                        enable-reg = <0x254>;
+                                        enable-bit = <27>;
+                                };
+
+				clkpwm: pwm {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x350>;
+					enable-reg = <0x250>;
+					enable-bit = <17>;
+				};
+
+				clksdhc: sdhc {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&pllb>;
+					divisor-reg = <0x330>;
+					divisor-mask = <0x3f>;
+					enable-reg = <0x250>;
+					enable-bit = <0>;
+				};
+			};
+		};
+
+		fb: fb@d8051700 {
+			compatible = "wm,wm8505-fb";
+			reg = <0xd8051700 0x200>;
+		};
+
+		ge_rops@d8050400 {
+			compatible = "wm,prizm-ge-rops";
+			reg = <0xd8050400 0x100>;
+		};
+
+		pwm: pwm@d8220000 {
+			#pwm-cells = <3>;
+			compatible = "via,vt8500-pwm";
+			reg = <0xd8220000 0x100>;
+			clocks = <&clkpwm>;
+		};
+
+		timer@d8130100 {
+			compatible = "via,vt8500-timer";
+			reg = <0xd8130100 0x28>;
+			interrupts = <36>;
+		};
+
+		ehci@d8007900 {
+			compatible = "via,vt8500-ehci";
+			reg = <0xd8007900 0x200>;
+			interrupts = <26>;
+		};
+
+		uhci@d8007b00 {
+			compatible = "platform-uhci";
+			reg = <0xd8007b00 0x200>;
+			interrupts = <26>;
+		};
+
+		uhci@d8008d00 {
+			compatible = "platform-uhci";
+			reg = <0xd8008d00 0x200>;
+			interrupts = <26>;
+		};
+
+		uart0: serial@d8200000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd8200000 0x1040>;
+			interrupts = <32>;
+			clocks = <&clkuart0>;
+			status = "disabled";
+		};
+
+		uart1: serial@d82b0000 {
+			compatible = "via,vt8500-uart";
+			reg = <0xd82b0000 0x1040>;
+			interrupts = <33>;
+			clocks = <&clkuart1>;
+			status = "disabled";
+		};
+
+                uart2: serial@d8210000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd8210000 0x1040>;
+                        interrupts = <47>;
+                        clocks = <&clkuart2>;
+			status = "disabled";
+                };
+
+                uart3: serial@d82c0000 {
+                        compatible = "via,vt8500-uart";
+                        reg = <0xd82c0000 0x1040>;
+                        interrupts = <50>;
+                        clocks = <&clkuart3>;
+			status = "disabled";
+                };
+
+		rtc@d8100000 {
+			compatible = "via,vt8500-rtc";
+			reg = <0xd8100000 0x10000>;
+			interrupts = <48>;
+		};
+
+		sdhc@d800a000 {
+			compatible = "wm,wm8505-sdhc";
+			reg = <0xd800a000 0x1000>;
+			interrupts = <20 21>;
+			clocks = <&clksdhc>;
+			bus-width = <4>;
+			sdon-inverted;
+		};
+
+		ethernet@d8004000 {
+			compatible = "via,vt8500-rhine";
+			reg = <0xd8004000 0x100>;
+			interrupts = <10>;
+                };
+	};
+};
diff --git a/src/arm/xenvm-4.2.dts b/src/arm/xenvm-4.2.dts
new file mode 100644
index 000000000000..336915151398
--- /dev/null
+++ b/src/arm/xenvm-4.2.dts
@@ -0,0 +1,81 @@
+/*
+ * Xen Virtual Machine for unprivileged guests
+ *
+ * Based on ARM Ltd. Versatile Express CoreTile Express (single CPU)
+ * Cortex-A15 MPCore (V2P-CA15)
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	model = "XENVM-4.2";
+	compatible = "xen,xenvm-4.2", "xen,xenvm";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen {
+		/* this field is going to be adjusted by the hypervisor */
+		bootargs = "console=hvc0 root=/dev/xvda";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+	};
+
+	psci {
+		compatible      = "arm,psci";
+		method          = "hvc";
+		cpu_off         = <1>;
+		cpu_on          = <2>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* this field is going to be adjusted by the hypervisor */
+		reg = <0 0x80000000 0 0x08000000>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0 0x2c001000 0 0x1000>,
+		      <0 0x2c002000 0 0x100>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	hypervisor {
+		compatible = "xen,xen-4.2", "xen,xen";
+		/* this field is going to be adjusted by the hypervisor */
+		reg = <0 0xb0000000 0 0x20000>;
+		/* this field is going to be adjusted by the hypervisor */
+		interrupts = <1 15 0xf08>;
+	};
+
+	motherboard {
+		arm,v2m-memory-map = "rs1";
+	};
+};
diff --git a/src/arm/zynq-7000.dtsi b/src/arm/zynq-7000.dtsi
new file mode 100644
index 000000000000..a5cd2eda3edf
--- /dev/null
+++ b/src/arm/zynq-7000.dtsi
@@ -0,0 +1,352 @@
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-7000";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clkc 3>;
+			clock-latency = <1000>;
+			cpu0-supply = <&regulator_vccpint>;
+			operating-points = <
+				/* kHz    uV */
+				666667  1000000
+				333334  1000000
+			>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clkc 3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 5 4>, <0 6 4>;
+		interrupt-parent = <&intc>;
+		reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
+	};
+
+	regulator_vccpint: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCPINT";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		adc: adc@f8007100 {
+			compatible = "xlnx,zynq-xadc-1.00.a";
+			reg = <0xf8007100 0x20>;
+			interrupts = <0 7 4>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 12>;
+		};
+
+		can0: can@e0008000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 19>, <&clkc 36>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0008000 0x1000>;
+			interrupts = <0 28 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		can1: can@e0009000 {
+			compatible = "xlnx,zynq-can-1.0";
+			status = "disabled";
+			clocks = <&clkc 20>, <&clkc 37>;
+			clock-names = "can_clk", "pclk";
+			reg = <0xe0009000 0x1000>;
+			interrupts = <0 51 4>;
+			interrupt-parent = <&intc>;
+			tx-fifo-depth = <0x40>;
+			rx-fifo-depth = <0x40>;
+		};
+
+		gpio0: gpio@e000a000 {
+			compatible = "xlnx,zynq-gpio-1.0";
+			#gpio-cells = <2>;
+			clocks = <&clkc 42>;
+			gpio-controller;
+			interrupt-parent = <&intc>;
+			interrupts = <0 20 4>;
+			reg = <0xe000a000 0x1000>;
+		};
+
+		i2c0: i2c@e0004000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 38>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 25 4>;
+			reg = <0xe0004000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@e0005000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 39>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 48 4>;
+			reg = <0xe0005000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@f8f01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0xF8F01000 0x1000>,
+			      <0xF8F00100 0x100>;
+		};
+
+		L2: cache-controller@f8f02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xF8F02000 0x1000>;
+			arm,data-latency = <3 2 2>;
+			arm,tag-latency = <2 2 2>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		mc: memory-controller@f8006000 {
+			compatible = "xlnx,zynq-ddrc-a05";
+			reg = <0xf8006000 0x1000>;
+		};
+
+		uart0: serial@e0000000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+			status = "disabled";
+			clocks = <&clkc 23>, <&clkc 40>;
+			clock-names = "uart_clk", "pclk";
+			reg = <0xE0000000 0x1000>;
+			interrupts = <0 27 4>;
+		};
+
+		uart1: serial@e0001000 {
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+			status = "disabled";
+			clocks = <&clkc 24>, <&clkc 41>;
+			clock-names = "uart_clk", "pclk";
+			reg = <0xE0001000 0x1000>;
+			interrupts = <0 50 4>;
+		};
+
+		spi0: spi@e0006000 {
+			compatible = "xlnx,zynq-spi-r1p6";
+			reg = <0xe0006000 0x1000>;
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 26 4>;
+			clocks = <&clkc 25>, <&clkc 34>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@e0007000 {
+			compatible = "xlnx,zynq-spi-r1p6";
+			reg = <0xe0007000 0x1000>;
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 49 4>;
+			clocks = <&clkc 26>, <&clkc 35>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gem0: ethernet@e000b000 {
+			compatible = "cdns,gem";
+			reg = <0xe000b000 0x1000>;
+			status = "disabled";
+			interrupts = <0 22 4>;
+			clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gem1: ethernet@e000c000 {
+			compatible = "cdns,gem";
+			reg = <0xe000c000 0x1000>;
+			status = "disabled";
+			interrupts = <0 45 4>;
+			clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
+			clock-names = "pclk", "hclk", "tx_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		sdhci0: sdhci@e0100000 {
+			compatible = "arasan,sdhci-8.9a";
+			status = "disabled";
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkc 21>, <&clkc 32>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 24 4>;
+			reg = <0xe0100000 0x1000>;
+		};
+
+		sdhci1: sdhci@e0101000 {
+			compatible = "arasan,sdhci-8.9a";
+			status = "disabled";
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkc 22>, <&clkc 33>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 47 4>;
+			reg = <0xe0101000 0x1000>;
+		};
+
+		slcr: slcr@f8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
+			reg = <0xF8000000 0x1000>;
+			ranges;
+			clkc: clkc@100 {
+				#clock-cells = <1>;
+				compatible = "xlnx,ps7-clkc";
+				fclk-enable = <0>;
+				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+						"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+						"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+						"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+						"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+						"gem1_aper", "sdio0_aper", "sdio1_aper",
+						"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+						"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+						"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+						"dbg_trc", "dbg_apb";
+				reg = <0x100 0x100>;
+			};
+
+			pinctrl0: pinctrl@700 {
+				compatible = "xlnx,pinctrl-zynq";
+				reg = <0x700 0x200>;
+				syscon = <&slcr>;
+			};
+		};
+
+		dmac_s: dmac@f8003000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xf8003000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
+				"dma4", "dma5", "dma6", "dma7";
+			interrupts = <0 13 4>,
+			             <0 14 4>, <0 15 4>,
+			             <0 16 4>, <0 17 4>,
+			             <0 40 4>, <0 41 4>,
+			             <0 42 4>, <0 43 4>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <4>;
+			clocks = <&clkc 27>;
+			clock-names = "apb_pclk";
+		};
+
+		devcfg: devcfg@f8007000 {
+			compatible = "xlnx,zynq-devcfg-1.0";
+			reg = <0xf8007000 0x100>;
+		};
+
+		global_timer: timer@f8f00200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xf8f00200 0x20>;
+			interrupts = <1 11 0x301>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 4>;
+		};
+
+		ttc0: timer@f8001000 {
+			interrupt-parent = <&intc>;
+			interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
+			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
+			reg = <0xF8001000 0x1000>;
+		};
+
+		ttc1: timer@f8002000 {
+			interrupt-parent = <&intc>;
+			interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
+			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
+			reg = <0xF8002000 0x1000>;
+		};
+
+		scutimer: timer@f8f00600 {
+			interrupt-parent = <&intc>;
+			interrupts = <1 13 0x301>;
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xf8f00600 0x20>;
+			clocks = <&clkc 4>;
+		};
+
+		usb0: usb@e0002000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 28>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 21 4>;
+			reg = <0xe0002000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		usb1: usb@e0003000 {
+			compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
+			status = "disabled";
+			clocks = <&clkc 29>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 44 4>;
+			reg = <0xe0003000 0x1000>;
+			phy_type = "ulpi";
+		};
+
+		watchdog0: watchdog@f8005000 {
+			clocks = <&clkc 45>;
+			compatible = "cdns,wdt-r1p2";
+			interrupt-parent = <&intc>;
+			interrupts = <0 9 1>;
+			reg = <0xf8005000 0x1000>;
+			timeout-sec = <10>;
+		};
+	};
+};
diff --git a/src/arm/zynq-parallella.dts b/src/arm/zynq-parallella.dts
new file mode 100644
index 000000000000..174571232ea5
--- /dev/null
+++ b/src/arm/zynq-parallella.dts
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * Derived from zynq-zed.dts:
+ *
+ *  Copyright (C) 2011 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *  Copyright (C) 2013 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Adapteva Parallella Board";
+	compatible = "adapteva,parallella", "xlnx,zynq-7000";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+		linux,stdout-path = "/amba/serial@e0001000";
+	};
+};
+
+&clkc {
+	fclk-enable = <0xf>;
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		/* Marvell 88E1318 */
+		compatible = "ethernet-phy-id0141.0e90",
+		             "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
+		                   <0x3 0x11 0xfff0 0xa>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	isl9305: isl9305@68 {
+		compatible = "isil,isl9305";
+		reg = <0x68>;
+
+		regulators {
+			dcd1 {
+				regulator-name = "VDD_DSP";
+				regulator-always-on;
+			};
+			dcd2 {
+				regulator-name = "1P35V";
+				regulator-always-on;
+			};
+			ldo1 {
+				regulator-name = "VDD_ADJ";
+			};
+			ldo2 {
+				regulator-name = "VDD_GPIO";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/src/arm/zynq-zc702.dts b/src/arm/zynq-zc702.dts
new file mode 100644
index 000000000000..1fc1d3911e9b
--- /dev/null
+++ b/src/arm/zynq-zc702.dts
@@ -0,0 +1,365 @@
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC702 Development Board";
+	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyPS0,115200 earlyprintk";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds23 {
+			label = "ds23";
+			gpios = <&gpio0 10 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+
+	i2cswitch@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			hwmon@52 {
+				compatible = "ti,ucd9248";
+				reg = <52>;
+			};
+			hwmon@53 {
+				compatible = "ti,ucd9248";
+				reg = <53>;
+			};
+			hwmon@54 {
+				compatible = "ti,ucd9248";
+				reg = <54>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_9_grp";
+		};
+
+		conf {
+			groups = "can0_9_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO46";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO47";
+			bias-disable;
+		};
+	};
+
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
+				 "gpio0_13_grp", "gpio0_14_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7", "MIO8";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
diff --git a/src/arm/zynq-zc706.dts b/src/arm/zynq-zc706.dts
new file mode 100644
index 000000000000..850518d9b8ac
--- /dev/null
+++ b/src/arm/zynq-zc706.dts
@@ -0,0 +1,314 @@
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC706 Development Board";
+	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyPS0,115200 earlyprintk";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem0_default>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+
+	i2cswitch@74 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			si570: clock-generator@5d {
+				#clock-cells = <0>;
+				compatible = "silabs,si570";
+				temperature-stability = <50>;
+				reg = <0x5d>;
+				factory-fout = <156250000>;
+				clock-frequency = <148500000>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@54 {
+				compatible = "at,24c08";
+				reg = <0x54>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			gpio@21 {
+				compatible = "ti,tca6416";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			ucd90120@65 {
+				compatible = "ti,ucd90120";
+				reg = <0x65>;
+			};
+		};
+	};
+};
+
+&pinctrl0 {
+	pinctrl_gem0_default: gem0-default {
+		mux {
+			function = "ethernet0";
+			groups = "ethernet0_0_grp";
+		};
+
+		conf {
+			groups = "ethernet0_0_grp";
+			slew-rate = <0>;
+			io-standard = <4>;
+		};
+
+		conf-rx {
+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
+			low-power-enable;
+			bias-disable;
+		};
+
+		mux-mdio {
+			function = "mdio0";
+			groups = "mdio0_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_gpio0_default: gpio0-default {
+		mux {
+			function = "gpio0";
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+		};
+
+		conf {
+			groups = "gpio0_7_grp", "gpio0_46_grp", "gpio0_47_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-pull-up {
+			pins = "MIO46", "MIO47";
+			bias-pull-up;
+		};
+
+		conf-pull-none {
+			pins = "MIO7";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c0_default: i2c0-default {
+		mux {
+			groups = "i2c0_10_grp";
+			function = "i2c0";
+		};
+
+		conf {
+			groups = "i2c0_10_grp";
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_2_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_2_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "gpio0_14_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "gpio0_14_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		mux-wp {
+			groups = "gpio0_15_grp";
+			function = "sdio0_wp";
+		};
+
+		conf-wp {
+			groups = "gpio0_15_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_10_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_10_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO49";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO48";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <0>;
+			io-standard = <1>;
+		};
+
+		conf-rx {
+			pins = "MIO29", "MIO31", "MIO36";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
+			       "MIO35", "MIO37", "MIO38", "MIO39";
+			bias-disable;
+		};
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+};
diff --git a/src/arm/zynq-zed.dts b/src/arm/zynq-zed.dts
new file mode 100644
index 000000000000..5658bc8434de
--- /dev/null
+++ b/src/arm/zynq-zed.dts
@@ -0,0 +1,67 @@
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq Zed Development Board";
+	compatible = "xlnx,zynq-zed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyPS0,115200 earlyprintk";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
diff --git a/src/arm/zynq-zybo.dts b/src/arm/zynq-zybo.dts
new file mode 100644
index 000000000000..a9a12ce5023b
--- /dev/null
+++ b/src/arm/zynq-zybo.dts
@@ -0,0 +1,52 @@
+/*
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZYBO Development Board";
+	compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyPS0,115200 earlyprintk";
+	};
+
+};
+
+&clkc {
+	ps-clk-frequency = <50000000>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/src/arm64/amd/amd-overdrive.dts b/src/arm64/amd/amd-overdrive.dts
new file mode 100644
index 000000000000..564a3f7df71d
--- /dev/null
+++ b/src/arm64/amd/amd-overdrive.dts
@@ -0,0 +1,66 @@
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+	model = "AMD Seattle Development Board (Overdrive)";
+	compatible = "amd,seattle-overdrive", "amd,seattle";
+
+	chosen {
+		stdout-path = &serial0;
+		linux,pci-probe-only;
+	};
+};
+
+&ccp0 {
+	status = "ok";
+};
+
+&gpio0 {
+	status = "ok";
+};
+
+&gpio1 {
+	status = "ok";
+};
+
+&i2c0 {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&spi0 {
+	status = "ok";
+};
+
+&spi1 {
+	status = "ok";
+	sdcard0: sdcard@0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		voltage-ranges = <3200 3400>;
+		gpios = <&gpio0 7 0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 3>;
+		pl022,hierarchy = <0>;
+		pl022,interface = <0>;
+		pl022,com-mode = <0x0>;
+		pl022,rx-level-trig = <0>;
+		pl022,tx-level-trig = <0>;
+	};
+};
+
+&v2m0 {
+	arm,msi-base-spi = <64>;
+	arm,msi-num-spis = <256>;
+};
diff --git a/src/arm64/amd/amd-seattle-clks.dtsi b/src/arm64/amd/amd-seattle-clks.dtsi
new file mode 100644
index 000000000000..f623c46525a6
--- /dev/null
+++ b/src/arm64/amd/amd-seattle-clks.dtsi
@@ -0,0 +1,54 @@
+/*
+ * DTS file for AMD Seattle Clocks
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+	adl3clk_100mhz: clk100mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "adl3clk_100mhz";
+	};
+
+	ccpclk_375mhz: clk375mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <375000000>;
+		clock-output-names = "ccpclk_375mhz";
+	};
+
+	sataclk_333mhz: clk333mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <333000000>;
+		clock-output-names = "sataclk_333mhz";
+	};
+
+	pcieclk_500mhz: clk500mhz_0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+		clock-output-names = "pcieclk_500mhz";
+	};
+
+	dmaclk_500mhz: clk500mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <500000000>;
+		clock-output-names = "dmaclk_500mhz";
+	};
+
+	miscclk_250mhz: clk250mhz_4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+		clock-output-names = "miscclk_250mhz";
+	};
+
+	uartspiclk_100mhz: clk100mhz_1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "uartspiclk_100mhz";
+	};
diff --git a/src/arm64/amd/amd-seattle-soc.dtsi b/src/arm64/amd/amd-seattle-soc.dtsi
new file mode 100644
index 000000000000..2874d92881fd
--- /dev/null
+++ b/src/arm64/amd/amd-seattle-soc.dtsi
@@ -0,0 +1,172 @@
+/*
+ * DTS file for AMD Seattle SoC
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+/ {
+	compatible = "amd,seattle";
+	interrupt-parent = <&gic0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	gic0: interrupt-controller@e1101000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0xe1110000 0 0x1000>,
+		      <0x0 0xe112f000 0 0x2000>,
+		      <0x0 0xe1140000 0 0x10000>,
+		      <0x0 0xe1160000 0 0x10000>;
+		interrupts = <1 9 0xf04>;
+		ranges = <0 0 0 0xe1100000 0 0x100000>;
+		v2m0: v2m@e0080000 {
+			compatible = "arm,gic-v2m-frame";
+			msi-controller;
+			reg = <0x0 0x00080000 0 0x1000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xff04>,
+			     <1 14 0xff04>,
+			     <1 11 0xff04>,
+			     <1 10 0xff04>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 7 4>,
+			     <0 8 4>,
+			     <0 9 4>,
+			     <0 10 4>,
+			     <0 11 4>,
+			     <0 12 4>,
+			     <0 13 4>,
+			     <0 14 4>;
+	};
+
+	smb0: smb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* DDR range is 40-bit addressing */
+		dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+
+		/include/ "amd-seattle-clks.dtsi"
+
+		sata0: sata@e0300000 {
+			compatible = "snps,dwc-ahci";
+			reg = <0 0xe0300000 0 0x800>;
+			interrupts = <0 355 4>;
+			clocks = <&sataclk_333mhz>;
+			dma-coherent;
+		};
+
+		i2c0: i2c@e1000000 {
+			status = "disabled";
+			compatible = "snps,designware-i2c";
+			reg = <0 0xe1000000 0 0x1000>;
+			interrupts = <0 357 4>;
+			clocks = <&uartspiclk_100mhz>;
+		};
+
+		serial0: serial@e1010000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0 0xe1010000 0 0x1000>;
+			interrupts = <0 328 4>;
+			clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		spi0: ssp@e1020000 {
+			status = "disabled";
+			compatible = "arm,pl022", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe1020000 0 0x1000>;
+			spi-controller;
+			interrupts = <0 330 4>;
+			clocks = <&uartspiclk_100mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		spi1: ssp@e1030000 {
+			status = "disabled";
+			compatible = "arm,pl022", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe1030000 0 0x1000>;
+			spi-controller;
+			interrupts = <0 329 4>;
+			clocks = <&uartspiclk_100mhz>;
+			clock-names = "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gpio0: gpio@e1040000 {
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe1040000 0 0x1000>;
+			gpio-controller;
+			interrupts = <0 359 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&uartspiclk_100mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@e1050000 {
+			status = "disabled";
+			compatible = "arm,pl061", "arm,primecell";
+			#gpio-cells = <2>;
+			reg = <0 0xe1050000 0 0x1000>;
+			gpio-controller;
+			interrupts = <0 358 4>;
+			clocks = <&uartspiclk_100mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		ccp0: ccp@e0100000 {
+			status = "disabled";
+			compatible = "amd,ccp-seattle-v1a";
+			reg = <0 0xe0100000 0 0x10000>;
+			interrupts = <0 3 4>;
+			dma-coherent;
+		};
+
+		pcie0: pcie@f0000000 {
+			compatible = "pci-host-ecam-generic";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			bus-range = <0 0x7f>;
+			msi-parent = <&v2m0>;
+			reg = <0 0xf0000000 0 0x10000000>;
+
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map =
+				<0x1000 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x120 0x1>,
+				<0x1000 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x121 0x1>,
+				<0x1000 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x122 0x1>,
+				<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
+
+			dma-coherent;
+			dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+			ranges =
+				/* I/O Memory (size=64K) */
+				<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
+				/* 32-bit MMIO (size=2G) */
+				<0x02000000 0x00 0x40000000 0x00 0x40000000 0x00 0x80000000>,
+				/* 64-bit MMIO (size= 124G) */
+				<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
+		};
+	};
+};
diff --git a/src/arm64/apm/apm-mustang.dts b/src/arm64/apm/apm-mustang.dts
new file mode 100644
index 000000000000..2e25de0800b9
--- /dev/null
+++ b/src/arm64/apm/apm-mustang.dts
@@ -0,0 +1,50 @@
+/*
+ * dts file for AppliedMicro (APM) Mustang Board
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-storm.dtsi"
+
+/ {
+	model = "APM X-Gene Mustang board";
+	compatible = "apm,mustang", "apm,xgene-storm";
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
+	};
+};
+
+&pcie0clk {
+	status = "ok";
+};
+
+&pcie0 {
+	status = "ok";
+};
+
+&serial0 {
+	status = "ok";
+};
+
+&menet {
+	status = "ok";
+};
+
+&sgenet0 {
+	status = "ok";
+};
+
+&xgenet {
+	status = "ok";
+};
diff --git a/src/arm64/apm/apm-storm.dtsi b/src/arm64/apm/apm-storm.dtsi
new file mode 100644
index 000000000000..f1ad9c2ab2e9
--- /dev/null
+++ b/src/arm64/apm/apm-storm.dtsi
@@ -0,0 +1,660 @@
+/*
+ * dts file for AppliedMicro (APM) X-Gene Storm SOC
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+	compatible = "apm,xgene-storm";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x000>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@001 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x001>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x300>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "apm,potenza", "arm,armv8";
+			reg = <0x0 0x301>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x1 0x0000fff8>;
+		};
+	};
+
+	gic: interrupt-controller@78010000 {
+		compatible = "arm,cortex-a15-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x78010000 0x0 0x1000>,	/* GIC Dist */
+		      <0x0 0x78020000 0x0 0x1000>,	/* GIC CPU */
+		      <0x0 0x78040000 0x0 0x2000>,	/* GIC VCPU Control */
+		      <0x0 0x78060000 0x0 0x2000>;	/* GIC VCPU */
+		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 0 0xff01>,	/* Secure Phys IRQ */
+			     <1 13 0xff01>,	/* Non-secure Phys IRQ */
+			     <1 14 0xff01>,	/* Virt IRQ */
+			     <1 15 0xff01>;	/* Hyp IRQ */
+		clock-frequency = <50000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clocks {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			refclk: refclk {
+				compatible = "fixed-clock";
+				#clock-cells = <1>;
+				clock-frequency = <100000000>;
+				clock-output-names = "refclk";
+			};
+
+			pcppll: pcppll@17000100 {
+				compatible = "apm,xgene-pcppll-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				clock-names = "pcppll";
+				reg = <0x0 0x17000100 0x0 0x1000>;
+				clock-output-names = "pcppll";
+				type = <0>;
+			};
+
+			socpll: socpll@17000120 {
+				compatible = "apm,xgene-socpll-clock";
+				#clock-cells = <1>;
+				clocks = <&refclk 0>;
+				clock-names = "socpll";
+				reg = <0x0 0x17000120 0x0 0x1000>;
+				clock-output-names = "socpll";
+				type = <1>;
+			};
+
+			socplldiv2: socplldiv2  {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <1>;
+				clocks = <&socpll 0>;
+				clock-names = "socplldiv2";
+				clock-mult = <1>;
+				clock-div = <2>;
+				clock-output-names = "socplldiv2";
+			};
+
+			qmlclk: qmlclk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "qmlclk";
+				reg = <0x0 0x1703C000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "qmlclk";
+			};
+
+			ethclk: ethclk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				clock-names = "ethclk";
+				reg = <0x0 0x17000000 0x0 0x1000>;
+				reg-names = "div-reg";
+				divider-offset = <0x238>;
+				divider-width = <0x9>;
+				divider-shift = <0x0>;
+				clock-output-names = "ethclk";
+			};
+
+			menetclk: menetclk {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&ethclk 0>;
+				reg = <0x0 0x1702C000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "menetclk";
+			};
+
+			sge0clk: sge0clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-mask = <0x3>;
+				clock-output-names = "sge0clk";
+			};
+
+			xge0clk: xge0clk@1f61c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f61c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-mask = <0x3>;
+				clock-output-names = "xge0clk";
+			};
+
+			sataphy1clk: sataphy1clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy1clk";
+				status = "disabled";
+				csr-offset = <0x4>;
+				csr-mask = <0x00>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy2clk: sataphy1clk@1f22c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f22c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy2clk";
+				status = "ok";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sataphy3clk: sataphy1clk@1f23c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f23c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sataphy3clk";
+				status = "ok";
+				csr-offset = <0x4>;
+				csr-mask = <0x3a>;
+				enable-offset = <0x0>;
+				enable-mask = <0x06>;
+			};
+
+			sata01clk: sata01clk@1f21c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f21c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata01clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			sata23clk: sata23clk@1f22c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f22c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata23clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			sata45clk: sata45clk@1f23c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f23c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "sata45clk";
+				csr-offset = <0x4>;
+				csr-mask = <0x05>;
+				enable-offset = <0x0>;
+				enable-mask = <0x39>;
+			};
+
+			rtcclk: rtcclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg";
+				csr-offset = <0xc>;
+				csr-mask = <0x2>;
+				enable-offset = <0x10>;
+				enable-mask = <0x2>;
+				clock-output-names = "rtcclk";
+			};
+
+			rngpkaclk: rngpkaclk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg";
+				csr-offset = <0xc>;
+				csr-mask = <0x10>;
+				enable-offset = <0x10>;
+				enable-mask = <0x10>;
+				clock-output-names = "rngpkaclk";
+			};
+
+			pcie0clk: pcie0clk@1f2bc000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2bc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie0clk";
+			};
+
+			pcie1clk: pcie1clk@1f2cc000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2cc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie1clk";
+			};
+
+			pcie2clk: pcie2clk@1f2dc000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f2dc000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie2clk";
+			};
+
+			pcie3clk: pcie3clk@1f50c000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f50c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie3clk";
+			};
+
+			pcie4clk: pcie4clk@1f51c000 {
+				status = "disabled";
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&socplldiv2 0>;
+				reg = <0x0 0x1f51c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				clock-output-names = "pcie4clk";
+			};
+		};
+
+		pcie0: pcie@1f2b0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+				0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000   /* io */
+				  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+			dma-coherent;
+			clocks = <&pcie0clk 0>;
+		};
+
+		pcie1: pcie@1f2c0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f2c0000 0x0 0x00010000   /* Controller registers */
+				0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000   /* io  */
+				  0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
+			dma-coherent;
+			clocks = <&pcie1clk 0>;
+		};
+
+		pcie2: pcie@1f2d0000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg =  < 0x00 0x1f2d0000 0x0 0x00010000   /* Controller registers */
+				 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000   /* io  */
+				  0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
+			dma-coherent;
+			clocks = <&pcie2clk 0>;
+		};
+
+		pcie3: pcie@1f500000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f500000 0x0 0x00010000   /* Controller registers */
+				0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000   /* io   */
+				  0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem  */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
+			dma-coherent;
+			clocks = <&pcie3clk 0>;
+		};
+
+		pcie4: pcie@1f510000 {
+			status = "disabled";
+			device_type = "pci";
+			compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = < 0x00 0x1f510000 0x0 0x00010000   /* Controller registers */
+				0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */
+			reg-names = "csr", "cfg";
+			ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000   /* io  */
+				  0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */
+			dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+				      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1
+					 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1
+					 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1
+					 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
+			dma-coherent;
+			clocks = <&pcie4clk 0>;
+		};
+
+		serial0: serial@1c020000 {
+			status = "disabled";
+			device_type = "serial";
+			compatible = "ns16550a";
+			reg = <0 0x1c020000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4c 0x4>;
+		};
+
+		serial1: serial@1c021000 {
+			status = "disabled";
+			device_type = "serial";
+			compatible = "ns16550a";
+			reg = <0 0x1c021000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4d 0x4>;
+		};
+
+		serial2: serial@1c022000 {
+			status = "disabled";
+			device_type = "serial";
+			compatible = "ns16550a";
+			reg = <0 0x1c022000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4e 0x4>;
+		};
+
+		serial3: serial@1c023000 {
+			status = "disabled";
+			device_type = "serial";
+			compatible = "ns16550a";
+			reg = <0 0x1c023000 0x0 0x1000>;
+			reg-shift = <2>;
+			clock-frequency = <10000000>; /* Updated by bootloader */
+			interrupt-parent = <&gic>;
+			interrupts = <0x0 0x4f 0x4>;
+		};
+
+		phy1: phy@1f21a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f21a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy1clk 0>;
+			status = "disabled";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy2clk 0>;
+			status = "ok";
+			apm,tx-boost-gain = <30 30 30 30 30 30>;
+			apm,tx-eye-tuning = <1 10 10 2 10 10>;
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f23a000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&sataphy3clk 0>;
+			status = "ok";
+			apm,tx-boost-gain = <31 31 31 31 31 31>;
+			apm,tx-eye-tuning = <2 10 10 2 10 10>;
+		};
+
+		sata1: sata@1a000000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a000000 0x0 0x1000>,
+			      <0x0 0x1f210000 0x0 0x1000>,
+			      <0x0 0x1f21d000 0x0 0x1000>,
+			      <0x0 0x1f21e000 0x0 0x1000>,
+			      <0x0 0x1f217000 0x0 0x1000>;
+			interrupts = <0x0 0x86 0x4>;
+			dma-coherent;
+			status = "disabled";
+			clocks = <&sata01clk 0>;
+			phys = <&phy1 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata2: sata@1a400000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>,
+			      <0x0 0x1f227000 0x0 0x1000>;
+			interrupts = <0x0 0x87 0x4>;
+			dma-coherent;
+			status = "ok";
+			clocks = <&sata23clk 0>;
+			phys = <&phy2 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata3: sata@1a800000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a800000 0x0 0x1000>,
+			      <0x0 0x1f230000 0x0 0x1000>,
+			      <0x0 0x1f23d000 0x0 0x1000>,
+			      <0x0 0x1f23e000 0x0 0x1000>;
+			interrupts = <0x0 0x88 0x4>;
+			dma-coherent;
+			status = "ok";
+			clocks = <&sata45clk 0>;
+			phys = <&phy3 0>;
+			phy-names = "sata-phy";
+		};
+
+		rtc: rtc@10510000 {
+			compatible = "apm,xgene-rtc";
+			reg = <0x0 0x10510000 0x0 0x400>;
+			interrupts = <0x0 0x46 0x4>;
+			#clock-cells = <1>;
+			clocks = <&rtcclk 0>;
+		};
+
+		menet: ethernet@17020000 {
+			compatible = "apm,xgene-enet";
+			status = "disabled";
+			reg = <0x0 0x17020000 0x0 0xd100>,
+			      <0x0 0X17030000 0x0 0Xc300>,
+			      <0x0 0X10000000 0x0 0X200>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0x3c 0x4>;
+			dma-coherent;
+			clocks = <&menetclk 0>;
+			/* mac address will be overwritten by the bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "rgmii";
+			phy-handle = <&menetphy>;
+			mdio {
+				compatible = "apm,xgene-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				menetphy: menetphy@3 {
+					compatible = "ethernet-phy-id001c.c915";
+					reg = <0x3>;
+				};
+
+			};
+		};
+
+		sgenet0: ethernet@1f210000 {
+			compatible = "apm,xgene-enet";
+			status = "disabled";
+			reg = <0x0 0x1f210000 0x0 0xd100>,
+			      <0x0 0x1f200000 0x0 0Xc300>,
+			      <0x0 0x1B000000 0x0 0X200>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0xA0 0x4>;
+			dma-coherent;
+			clocks = <&sge0clk 0>;
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "sgmii";
+		};
+
+		xgenet: ethernet@1f610000 {
+			compatible = "apm,xgene-enet";
+			status = "disabled";
+			reg = <0x0 0x1f610000 0x0 0xd100>,
+			      <0x0 0x1f600000 0x0 0Xc300>,
+			      <0x0 0x18000000 0x0 0X200>;
+			reg-names = "enet_csr", "ring_csr", "ring_cmd";
+			interrupts = <0x0 0x60 0x4>;
+			dma-coherent;
+			clocks = <&xge0clk 0>;
+			/* mac address will be overwritten by the bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			phy-connection-type = "xgmii";
+		};
+
+		rng: rng@10520000 {
+			compatible = "apm,xgene-rng";
+			reg = <0x0 0x10520000 0x0 0x100>;
+			interrupts = <0x0 0x41 0x4>;
+			clocks = <&rngpkaclk 0>;
+		};
+	};
+};
diff --git a/src/arm64/arm/foundation-v8.dts b/src/arm64/arm/foundation-v8.dts
new file mode 100644
index 000000000000..27f32962e55c
--- /dev/null
+++ b/src/arm64/arm/foundation-v8.dts
@@ -0,0 +1,232 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	model = "Foundation-v8A";
+	compatible = "arm,foundation-aarch64", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>,
+		      <0x00000008 0x80000000 0 0x80000000>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x2c001000 0 0x1000>,
+		      <0x0 0x2c002000 0 0x1000>,
+		      <0x0 0x2c004000 0 0x2000>,
+		      <0x0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+	};
+
+	smb {
+		compatible = "arm,vexpress,v2m-p1", "simple-bus";
+		arm,v2m-memory-map = "rs1";
+		#address-cells = <2>; /* SMB chipselect number and offset */
+		#size-cells = <1>;
+
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+
+		ethernet@2,02000000 {
+			compatible = "smsc,lan91c111";
+			reg = <2 0x02000000 0x10000>;
+			interrupts = <15>;
+		};
+
+		v2m_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "v2m:clk24mhz";
+		};
+
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "v2m:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "v2m:refclk32khz";
+		};
+
+		iofpga@3,00000000 {
+			compatible = "arm,amba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 3 0 0x200000>;
+
+			v2m_sysreg: sysreg@010000 {
+				compatible = "arm,vexpress-sysreg";
+				reg = <0x010000 0x1000>;
+			};
+
+			v2m_serial0: uart@090000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x090000 0x1000>;
+				interrupts = <5>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial1: uart@0a0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0a0000 0x1000>;
+				interrupts = <6>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial2: uart@0b0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0b0000 0x1000>;
+				interrupts = <7>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial3: uart@0c0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0c0000 0x1000>;
+				interrupts = <8>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			virtio_block@0130000 {
+				compatible = "virtio,mmio";
+				reg = <0x130000 0x200>;
+				interrupts = <42>;
+			};
+		};
+	};
+};
diff --git a/src/arm64/arm/juno-clocks.dtsi b/src/arm64/arm/juno-clocks.dtsi
new file mode 100644
index 000000000000..ea2b5666a16f
--- /dev/null
+++ b/src/arm64/arm/juno-clocks.dtsi
@@ -0,0 +1,44 @@
+/*
+ * ARM Juno Platform clocks
+ *
+ * Copyright (c) 2013-2014 ARM Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+
+	/* SoC fixed clocks */
+	soc_uartclk: refclk72738khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <7273800>;
+		clock-output-names = "juno:uartclk";
+	};
+
+	soc_usb48mhz: clk48mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+		clock-output-names = "clk48mhz";
+	};
+
+	soc_smc50mhz: clk50mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "smc_clk";
+	};
+
+	soc_refclk100mhz: refclk100mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "apb_pclk";
+	};
+
+	soc_faxiclk: refclk533mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <533000000>;
+		clock-output-names = "faxi_clk";
+	};
diff --git a/src/arm64/arm/juno-motherboard.dtsi b/src/arm64/arm/juno-motherboard.dtsi
new file mode 100644
index 000000000000..c138b95a8356
--- /dev/null
+++ b/src/arm64/arm/juno-motherboard.dtsi
@@ -0,0 +1,129 @@
+/*
+ * ARM Juno Platform motherboard peripherals
+ *
+ * Copyright (c) 2013-2014 ARM Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+
+		mb_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "juno_mb:clk24mhz";
+		};
+
+		mb_clk25mhz: clk25mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+			clock-output-names = "juno_mb:clk25mhz";
+		};
+
+		motherboard {
+			compatible = "arm,vexpress,v2p-p1", "simple-bus";
+			#address-cells = <2>;  /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			#interrupt-cells = <1>;
+			ranges;
+			model = "V2M-Juno";
+			arm,hbi = <0x252>;
+			arm,vexpress,site = <0>;
+			arm,v2m-memory-map = "rs1";
+
+			mb_fixed_3v3: fixedregulator@0 {
+				compatible = "regulator-fixed";
+				regulator-name = "MCC_SB_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ethernet@2,00000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x00000000 0x10000>;
+				interrupts = <3>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				clocks = <&mb_clk25mhz>;
+				vdd33a-supply = <&mb_fixed_3v3>;
+				vddvario-supply = <&mb_fixed_3v3>;
+			};
+
+			usb@5,00000000 {
+				compatible = "nxp,usb-isp1763";
+				reg = <5 0x00000000 0x20000>;
+				bus-width = <16>;
+				interrupts = <4>;
+			};
+
+			iofpga@3,00000000 {
+				compatible = "arm,amba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				mmci@050000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <5>;
+					/* cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>; */
+					max-frequency = <12000000>;
+					vmmc-supply = <&mb_fixed_3v3>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@060000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <8>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@070000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <8>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				wdt@0f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x10000>;
+					interrupts = <7>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "wdogclk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x10000>;
+					interrupts = <9>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "timclken1", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x10000>;
+					interrupts = <9>;
+					clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+					clock-names = "timclken1", "apb_pclk";
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x10000>;
+					interrupts = <0>;
+					clocks = <&soc_smc50mhz>;
+					clock-names = "apb_pclk";
+				};
+			};
+		};
diff --git a/src/arm64/arm/juno.dts b/src/arm64/arm/juno.dts
new file mode 100644
index 000000000000..d429129ecb3d
--- /dev/null
+++ b/src/arm64/arm/juno.dts
@@ -0,0 +1,218 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2013-2014 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "ARM Juno development board (r0)";
+	compatible = "arm,juno", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &soc_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		A57_0: cpu@0 {
+			compatible = "arm,cortex-a57","arm,armv8";
+			reg = <0x0 0x0>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		A57_1: cpu@1 {
+			compatible = "arm,cortex-a57","arm,armv8";
+			reg = <0x0 0x1>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		A53_0: cpu@100 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		A53_1: cpu@101 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		A53_2: cpu@102 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x102>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+
+		A53_3: cpu@103 {
+			compatible = "arm,cortex-a53","arm,armv8";
+			reg = <0x0 0x103>;
+			device_type = "cpu";
+			enable-method = "psci";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* last 16MB of the first memory area is reserved for secure world use by firmware */
+		reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+		      <0x00000008 0x80000000 0x1 0x80000000>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,gic-400", "arm,cortex-a15-gic";
+		reg = <0x0 0x2c010000 0 0x1000>,
+		      <0x0 0x2c02f000 0 0x2000>,
+		      <0x0 0x2c04f000 0 0x2000>,
+		      <0x0 0x2c06f000 0 0x2000>;
+		#address-cells = <0>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	/include/ "juno-clocks.dtsi"
+
+	dma@7ff00000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x0 0x7ff00000 0 0x1000>;
+		#dma-cells = <1>;
+		#dma-channels = <8>;
+		#dma-requests = <32>;
+		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_faxiclk>;
+		clock-names = "apb_pclk";
+	};
+
+	soc_uart0: uart@7ff80000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x0 0x7ff80000 0x0 0x1000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	i2c@7ffa0000 {
+		compatible = "snps,designware-i2c";
+		reg = <0x0 0x7ffa0000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <400000>;
+		i2c-sda-hold-time-ns = <500>;
+		clocks = <&soc_smc50mhz>;
+
+		dvi0: dvi-transmitter@70 {
+			compatible = "nxp,tda998x";
+			reg = <0x70>;
+		};
+
+		dvi1: dvi-transmitter@71 {
+			compatible = "nxp,tda998x";
+			reg = <0x71>;
+		};
+	};
+
+	ohci@7ffb0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0x7ffb0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	ehci@7ffc0000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0x7ffc0000 0x0 0x10000>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_usb48mhz>;
+	};
+
+	memory-controller@7ffd0000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0 0x7ffd0000 0 0x1000>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+	};
+
+	smb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 15>;
+		interrupt-map = <0 0  0 &gic 0  68 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  1 &gic 0  69 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  2 &gic 0  70 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0  9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
+
+		/include/ "juno-motherboard.dtsi"
+	};
+};
diff --git a/src/arm64/arm/rtsm_ve-aemv8a.dts b/src/arm64/arm/rtsm_ve-aemv8a.dts
new file mode 100644
index 000000000000..efc59b3baf63
--- /dev/null
+++ b/src/arm64/arm/rtsm_ve-aemv8a.dts
@@ -0,0 +1,159 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	model = "RTSM_VE_AEMv8A";
+	compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>,
+		      <0x00000008 0x80000000 0 0x80000000>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x0 0x2c001000 0 0x1000>,
+		      <0x0 0x2c002000 0 0x1000>,
+		      <0x0 0x2c004000 0 0x2000>,
+		      <0x0 0x2c006000 0 0x2000>;
+		interrupts = <1 9 0xf04>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+	};
+
+	smb {
+		compatible = "simple-bus";
+
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0  0 4>,
+				<0 0  1 &gic 0  1 4>,
+				<0 0  2 &gic 0  2 4>,
+				<0 0  3 &gic 0  3 4>,
+				<0 0  4 &gic 0  4 4>,
+				<0 0  5 &gic 0  5 4>,
+				<0 0  6 &gic 0  6 4>,
+				<0 0  7 &gic 0  7 4>,
+				<0 0  8 &gic 0  8 4>,
+				<0 0  9 &gic 0  9 4>,
+				<0 0 10 &gic 0 10 4>,
+				<0 0 11 &gic 0 11 4>,
+				<0 0 12 &gic 0 12 4>,
+				<0 0 13 &gic 0 13 4>,
+				<0 0 14 &gic 0 14 4>,
+				<0 0 15 &gic 0 15 4>,
+				<0 0 16 &gic 0 16 4>,
+				<0 0 17 &gic 0 17 4>,
+				<0 0 18 &gic 0 18 4>,
+				<0 0 19 &gic 0 19 4>,
+				<0 0 20 &gic 0 20 4>,
+				<0 0 21 &gic 0 21 4>,
+				<0 0 22 &gic 0 22 4>,
+				<0 0 23 &gic 0 23 4>,
+				<0 0 24 &gic 0 24 4>,
+				<0 0 25 &gic 0 25 4>,
+				<0 0 26 &gic 0 26 4>,
+				<0 0 27 &gic 0 27 4>,
+				<0 0 28 &gic 0 28 4>,
+				<0 0 29 &gic 0 29 4>,
+				<0 0 30 &gic 0 30 4>,
+				<0 0 31 &gic 0 31 4>,
+				<0 0 32 &gic 0 32 4>,
+				<0 0 33 &gic 0 33 4>,
+				<0 0 34 &gic 0 34 4>,
+				<0 0 35 &gic 0 35 4>,
+				<0 0 36 &gic 0 36 4>,
+				<0 0 37 &gic 0 37 4>,
+				<0 0 38 &gic 0 38 4>,
+				<0 0 39 &gic 0 39 4>,
+				<0 0 40 &gic 0 40 4>,
+				<0 0 41 &gic 0 41 4>,
+				<0 0 42 &gic 0 42 4>;
+
+		/include/ "rtsm_ve-motherboard.dtsi"
+	};
+};
diff --git a/src/arm64/arm/rtsm_ve-motherboard.dtsi b/src/arm64/arm/rtsm_ve-motherboard.dtsi
new file mode 100644
index 000000000000..c46cbb29f3c6
--- /dev/null
+++ b/src/arm64/arm/rtsm_ve-motherboard.dtsi
@@ -0,0 +1,273 @@
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Versatile Express (VE) system model
+ * Motherboard component
+ *
+ * VEMotherBoard.lisa
+ */
+
+	motherboard {
+		arm,v2m-memory-map = "rs1";
+		compatible = "arm,vexpress,v2m-p1", "simple-bus";
+		#address-cells = <2>; /* SMB chipselect number and offset */
+		#size-cells = <1>;
+		#interrupt-cells = <1>;
+		ranges;
+
+		flash@0,00000000 {
+			compatible = "arm,vexpress-flash", "cfi-flash";
+			reg = <0 0x00000000 0x04000000>,
+			      <4 0x00000000 0x04000000>;
+			bank-width = <4>;
+		};
+
+		v2m_video_ram: vram@2,00000000 {
+			compatible = "arm,vexpress-vram";
+			reg = <2 0x00000000 0x00800000>;
+		};
+
+		ethernet@2,02000000 {
+			compatible = "smsc,lan91c111";
+			reg = <2 0x02000000 0x10000>;
+			interrupts = <15>;
+		};
+
+		v2m_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "v2m:clk24mhz";
+		};
+
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "v2m:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "v2m:refclk32khz";
+		};
+
+		iofpga@3,00000000 {
+			compatible = "arm,amba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 3 0 0x200000>;
+
+			v2m_sysreg: sysreg@010000 {
+				compatible = "arm,vexpress-sysreg";
+				reg = <0x010000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			v2m_sysctl: sysctl@020000 {
+				compatible = "arm,sp810", "arm,primecell";
+				reg = <0x020000 0x1000>;
+				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+				clock-names = "refclk", "timclk", "apb_pclk";
+				#clock-cells = <1>;
+				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+			};
+
+			aaci@040000 {
+				compatible = "arm,pl041", "arm,primecell";
+				reg = <0x040000 0x1000>;
+				interrupts = <11>;
+				clocks = <&v2m_clk24mhz>;
+				clock-names = "apb_pclk";
+			};
+
+			mmci@050000 {
+				compatible = "arm,pl180", "arm,primecell";
+				reg = <0x050000 0x1000>;
+				interrupts = <9 10>;
+				cd-gpios = <&v2m_sysreg 0 0>;
+				wp-gpios = <&v2m_sysreg 1 0>;
+				max-frequency = <12000000>;
+				vmmc-supply = <&v2m_fixed_3v3>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "mclk", "apb_pclk";
+			};
+
+			kmi@060000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x060000 0x1000>;
+				interrupts = <12>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			kmi@070000 {
+				compatible = "arm,pl050", "arm,primecell";
+				reg = <0x070000 0x1000>;
+				interrupts = <13>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "KMIREFCLK", "apb_pclk";
+			};
+
+			v2m_serial0: uart@090000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x090000 0x1000>;
+				interrupts = <5>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial1: uart@0a0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0a0000 0x1000>;
+				interrupts = <6>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial2: uart@0b0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0b0000 0x1000>;
+				interrupts = <7>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial3: uart@0c0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0c0000 0x1000>;
+				interrupts = <8>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			wdt@0f0000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0x0f0000 0x1000>;
+				interrupts = <0>;
+				clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+				clock-names = "wdogclk", "apb_pclk";
+			};
+
+			v2m_timer01: timer@110000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x110000 0x1000>;
+				interrupts = <2>;
+				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			v2m_timer23: timer@120000 {
+				compatible = "arm,sp804", "arm,primecell";
+				reg = <0x120000 0x1000>;
+				interrupts = <3>;
+				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
+			};
+
+			rtc@170000 {
+				compatible = "arm,pl031", "arm,primecell";
+				reg = <0x170000 0x1000>;
+				interrupts = <4>;
+				clocks = <&v2m_clk24mhz>;
+				clock-names = "apb_pclk";
+			};
+
+			clcd@1f0000 {
+				compatible = "arm,pl111", "arm,primecell";
+				reg = <0x1f0000 0x1000>;
+				interrupt-names = "combined";
+				interrupts = <14>;
+				clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+				clock-names = "clcdclk", "apb_pclk";
+				arm,pl11x,framebuffer = <0x18000000 0x00180000>;
+				memory-region = <&v2m_video_ram>;
+				max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+
+				port {
+					v2m_clcd_pads: endpoint {
+						remote-endpoint = <&v2m_clcd_panel>;
+						arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+					};
+				};
+
+				panel {
+					compatible = "panel-dpi";
+
+					port {
+						v2m_clcd_panel: endpoint {
+							remote-endpoint = <&v2m_clcd_pads>;
+						};
+					};
+
+					panel-timing {
+						clock-frequency = <63500127>;
+						hactive = <1024>;
+						hback-porch = <152>;
+						hfront-porch = <48>;
+						hsync-len = <104>;
+						vactive = <768>;
+						vback-porch = <23>;
+						vfront-porch = <3>;
+						vsync-len = <4>;
+					};
+				};
+			};
+
+			virtio_block@0130000 {
+				compatible = "virtio,mmio";
+				reg = <0x130000 0x200>;
+				interrupts = <42>;
+			};
+		};
+
+		v2m_fixed_3v3: fixedregulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		mcc {
+			compatible = "arm,vexpress,config-bus";
+			arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+			v2m_oscclk1: osc@1 {
+				/* CLCD clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 1>;
+				freq-range = <23750000 63500000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk1";
+			};
+
+			reset@0 {
+				compatible = "arm,vexpress-reset";
+				arm,vexpress-sysreg,func = <5 0>;
+			};
+
+			muxfpga@0 {
+				compatible = "arm,vexpress-muxfpga";
+				arm,vexpress-sysreg,func = <7 0>;
+			};
+
+			shutdown@0 {
+				compatible = "arm,vexpress-shutdown";
+				arm,vexpress-sysreg,func = <8 0>;
+			};
+
+			reboot@0 {
+				compatible = "arm,vexpress-reboot";
+				arm,vexpress-sysreg,func = <9 0>;
+			};
+
+			dvimode@0 {
+				compatible = "arm,vexpress-dvimode";
+				arm,vexpress-sysreg,func = <11 0>;
+			};
+		};
+	};
diff --git a/src/arm64/cavium/thunder-88xx.dts b/src/arm64/cavium/thunder-88xx.dts
new file mode 100644
index 000000000000..800ba65991f7
--- /dev/null
+++ b/src/arm64/cavium/thunder-88xx.dts
@@ -0,0 +1,67 @@
+/*
+ * Cavium Thunder DTS file - Thunder board description
+ *
+ * Copyright (C) 2014, Cavium Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "thunder-88xx.dtsi"
+
+/ {
+	model = "Cavium ThunderX CN88XX board";
+	compatible = "cavium,thunder-88xx";
+
+	aliases {
+		serial0 = &uaa0;
+		serial1 = &uaa1;
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x0 0x00000000 0x0 0x80000000>;
+	};
+};
diff --git a/src/arm64/cavium/thunder-88xx.dtsi b/src/arm64/cavium/thunder-88xx.dtsi
new file mode 100644
index 000000000000..d8c0bdc51882
--- /dev/null
+++ b/src/arm64/cavium/thunder-88xx.dtsi
@@ -0,0 +1,401 @@
+/*
+ * Cavium Thunder DTS file - Thunder SoC description
+ *
+ * Copyright (C) 2014, Cavium Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "cavium,thunder-88xx";
+	interrupt-parent = <&gic0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x000>;
+			enable-method = "psci";
+		};
+		cpu@001 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x001>;
+			enable-method = "psci";
+		};
+		cpu@002 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x002>;
+			enable-method = "psci";
+		};
+		cpu@003 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x003>;
+			enable-method = "psci";
+		};
+		cpu@004 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x004>;
+			enable-method = "psci";
+		};
+		cpu@005 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x005>;
+			enable-method = "psci";
+		};
+		cpu@006 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x006>;
+			enable-method = "psci";
+		};
+		cpu@007 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x007>;
+			enable-method = "psci";
+		};
+		cpu@008 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x008>;
+			enable-method = "psci";
+		};
+		cpu@009 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x009>;
+			enable-method = "psci";
+		};
+		cpu@00a {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00a>;
+			enable-method = "psci";
+		};
+		cpu@00b {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00b>;
+			enable-method = "psci";
+		};
+		cpu@00c {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00c>;
+			enable-method = "psci";
+		};
+		cpu@00d {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00d>;
+			enable-method = "psci";
+		};
+		cpu@00e {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00e>;
+			enable-method = "psci";
+		};
+		cpu@00f {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x00f>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+		cpu@104 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x104>;
+			enable-method = "psci";
+		};
+		cpu@105 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x105>;
+			enable-method = "psci";
+		};
+		cpu@106 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x106>;
+			enable-method = "psci";
+		};
+		cpu@107 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x107>;
+			enable-method = "psci";
+		};
+		cpu@108 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x108>;
+			enable-method = "psci";
+		};
+		cpu@109 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x109>;
+			enable-method = "psci";
+		};
+		cpu@10a {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10a>;
+			enable-method = "psci";
+		};
+		cpu@10b {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10b>;
+			enable-method = "psci";
+		};
+		cpu@10c {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10c>;
+			enable-method = "psci";
+		};
+		cpu@10d {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10d>;
+			enable-method = "psci";
+		};
+		cpu@10e {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10e>;
+			enable-method = "psci";
+		};
+		cpu@10f {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x10f>;
+			enable-method = "psci";
+		};
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x200>;
+			enable-method = "psci";
+		};
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x201>;
+			enable-method = "psci";
+		};
+		cpu@202 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x202>;
+			enable-method = "psci";
+		};
+		cpu@203 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x203>;
+			enable-method = "psci";
+		};
+		cpu@204 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x204>;
+			enable-method = "psci";
+		};
+		cpu@205 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x205>;
+			enable-method = "psci";
+		};
+		cpu@206 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x206>;
+			enable-method = "psci";
+		};
+		cpu@207 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x207>;
+			enable-method = "psci";
+		};
+		cpu@208 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x208>;
+			enable-method = "psci";
+		};
+		cpu@209 {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x209>;
+			enable-method = "psci";
+		};
+		cpu@20a {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20a>;
+			enable-method = "psci";
+		};
+		cpu@20b {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20b>;
+			enable-method = "psci";
+		};
+		cpu@20c {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20c>;
+			enable-method = "psci";
+		};
+		cpu@20d {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20d>;
+			enable-method = "psci";
+		};
+		cpu@20e {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20e>;
+			enable-method = "psci";
+		};
+		cpu@20f {
+			device_type = "cpu";
+			compatible = "cavium,thunder", "arm,armv8";
+			reg = <0x0 0x20f>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xff01>,
+		             <1 14 0xff01>,
+		             <1 11 0xff01>,
+		             <1 10 0xff01>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		refclk50mhz: refclk50mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			clock-output-names = "refclk50mhz";
+		};
+
+		gic0: interrupt-controller@8010,00000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
+			      <0x8010 0x80000000 0x0 0x600000>; /* GICR */
+			interrupts = <1 9 0xf04>;
+		};
+
+		uaa0: serial@87e0,24000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x87e0 0x24000000 0x0 0x1000>;
+			interrupts = <1 21 4>;
+			clocks = <&refclk50mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		uaa1: serial@87e0,25000000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x87e0 0x25000000 0x0 0x1000>;
+			interrupts = <1 22 4>;
+			clocks = <&refclk50mhz>;
+			clock-names = "apb_pclk";
+		};
+	};
+};
diff --git a/src/arm64/exynos/exynos7-espresso.dts b/src/arm64/exynos/exynos7-espresso.dts
new file mode 100644
index 000000000000..5424cc450f72
--- /dev/null
+++ b/src/arm64/exynos/exynos7-espresso.dts
@@ -0,0 +1,84 @@
+/*
+ * SAMSUNG Exynos7 Espresso board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos7.dtsi"
+
+/ {
+	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
+	compatible = "samsung,exynos7-espresso", "samsung,exynos7";
+
+	aliases {
+		serial0 = &serial_2;
+		mshc0 = &mmc_0;
+		mshc2 = &mmc_2;
+	};
+
+	chosen {
+		linux,stdout-path = &serial_2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x0 0xC0000000>;
+	};
+};
+
+&fin_pll {
+	clock-frequency = <24000000>;
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	cap-mmc-highspeed;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <800000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	disable-wp;
+};
diff --git a/src/arm64/exynos/exynos7-pinctrl.dtsi b/src/arm64/exynos/exynos7-pinctrl.dtsi
new file mode 100644
index 000000000000..2eef4a279131
--- /dev/null
+++ b/src/arm64/exynos/exynos7-pinctrl.dtsi
@@ -0,0 +1,588 @@
+/*
+ * Samsung's Exynos7 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&pinctrl_alive {
+	gpa0: gpa0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
+	};
+
+	gpa1: gpa1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	};
+
+	gpa2: gpa2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_bus0 {
+	gpb0: gpb0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd4: gpd4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd5: gpd5 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd6: gpd6 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd7: gpd7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd8: gpd8 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c10_bus: hs-i2c10-bus {
+		samsung,pins = "gpb0-1", "gpb0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c11_bus: hs-i2c11-bus {
+		samsung,pins = "gpb0-3", "gpb0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus {
+		samsung,pins = "gpd0-3", "gpd0-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_data: uart0-data {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpd1-4", "gpd1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus {
+		samsung,pins = "gpd1-3", "gpd1-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus {
+		samsung,pins = "gpd2-1", "gpd2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus {
+		samsung,pins = "gpd2-3", "gpd2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c9_bus: hs-i2c9-bus {
+		samsung,pins = "gpd2-7", "gpd2-6";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpd2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpd2-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpd2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpd2-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c8_bus: hs-i2c8-bus {
+		samsung,pins = "gpd5-3", "gpd5-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpd5-0", "gpd5-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi2_bus: spi2-bus {
+		samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi1_bus: spi1-bus {
+		samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	spi0_bus: spi0-bus {
+		samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus {
+		samsung,pins = "gpg3-1", "gpg3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus {
+		samsung,pins = "gpg3-3", "gpg3-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_nfc {
+	gpj0: gpj0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus {
+		samsung,pins = "gpj0-1", "gpj0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_touch {
+	gpj1: gpj1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus {
+		samsung,pins = "gpj1-1", "gpj1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_ff {
+	gpg4: gpg4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi3_bus: spi3-bus {
+		samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_ese {
+	gpv7: gpv7 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	spi4_bus: spi4-bus {
+		samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_fsys0 {
+	gpr4: gpr4 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpr4-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpr4-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpr4-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpr4-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+};
+
+&pinctrl_fsys1 {
+	gpr0: gpr0 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr1: gpr1 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr2: gpr2 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpr3: gpr3 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpr0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpr0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_ds: sd0-ds {
+		samsung,pins = "gpr0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_qrdy: sd0-qrdy {
+		samsung,pins = "gpr0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpr1-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpr2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_cmd: sd1-cmd {
+		samsung,pins = "gpr2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_ds: sd1-ds {
+		samsung,pins = "gpr2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_qrdy: sd1-qrdy {
+		samsung,pins = "gpr2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_int: sd1-int {
+		samsung,pins = "gpr2-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <6>;
+	};
+
+	sd1_bus1: sd1-bus-width1 {
+		samsung,pins = "gpr3-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_bus4: sd1-bus-width4 {
+		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+
+	sd1_bus8: sd1-bus-width8 {
+		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <2>;
+	};
+};
diff --git a/src/arm64/exynos/exynos7.dtsi b/src/arm64/exynos/exynos7.dtsi
new file mode 100644
index 000000000000..d7a37c3a6b52
--- /dev/null
+++ b/src/arm64/exynos/exynos7.dtsi
@@ -0,0 +1,530 @@
+/*
+ * SAMSUNG EXYNOS7 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/exynos7-clk.h>
+
+/ {
+	compatible = "samsung,exynos7";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_bus0;
+		pinctrl2 = &pinctrl_nfc;
+		pinctrl3 = &pinctrl_touch;
+		pinctrl4 = &pinctrl_ff;
+		pinctrl5 = &pinctrl_ese;
+		pinctrl6 = &pinctrl_fsys0;
+		pinctrl7 = &pinctrl_fsys1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57", "arm,armv8";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x18000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		fin_pll: xxti {
+			compatible = "fixed-clock";
+			clock-output-names = "fin_pll";
+			#clock-cells = <0>;
+		};
+
+		gic: interrupt-controller@11001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg =	<0x11001000 0x1000>,
+				<0x11002000 0x1000>,
+				<0x11004000 0x2000>,
+				<0x11006000 0x2000>;
+		};
+
+		clock_topc: clock-controller@10570000 {
+			compatible = "samsung,exynos7-clock-topc";
+			reg = <0x10570000 0x10000>;
+			#clock-cells = <1>;
+		};
+
+		clock_top0: clock-controller@105d0000 {
+			compatible = "samsung,exynos7-clock-top0";
+			reg = <0x105d0000 0xb000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
+				 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+				 <&clock_topc DOUT_SCLK_CC_PLL>,
+				 <&clock_topc DOUT_SCLK_MFC_PLL>;
+			clock-names = "fin_pll", "dout_sclk_bus0_pll",
+				      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
+				      "dout_sclk_mfc_pll";
+		};
+
+		clock_top1: clock-controller@105e0000 {
+			compatible = "samsung,exynos7-clock-top1";
+			reg = <0x105e0000 0xb000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
+				 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+				 <&clock_topc DOUT_SCLK_CC_PLL>,
+				 <&clock_topc DOUT_SCLK_MFC_PLL>;
+			clock-names = "fin_pll", "dout_sclk_bus0_pll",
+				      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
+				      "dout_sclk_mfc_pll";
+		};
+
+		clock_ccore: clock-controller@105b0000 {
+			compatible = "samsung,exynos7-clock-ccore";
+			reg = <0x105b0000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>;
+			clock-names = "fin_pll", "dout_aclk_ccore_133";
+		};
+
+		clock_peric0: clock-controller@13610000 {
+			compatible = "samsung,exynos7-clock-peric0";
+			reg = <0x13610000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC0>,
+				 <&clock_top0 CLK_SCLK_UART0>;
+			clock-names = "fin_pll", "dout_aclk_peric0_66",
+				      "sclk_uart0";
+		};
+
+		clock_peric1: clock-controller@14c80000 {
+			compatible = "samsung,exynos7-clock-peric1";
+			reg = <0x14c80000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>,
+				 <&clock_top0 CLK_SCLK_UART1>,
+				 <&clock_top0 CLK_SCLK_UART2>,
+				 <&clock_top0 CLK_SCLK_UART3>;
+			clock-names = "fin_pll", "dout_aclk_peric1_66",
+				      "sclk_uart1", "sclk_uart2", "sclk_uart3";
+		};
+
+		clock_peris: clock-controller@10040000 {
+			compatible = "samsung,exynos7-clock-peris";
+			reg = <0x10040000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_PERIS>;
+			clock-names = "fin_pll", "dout_aclk_peris_66";
+		};
+
+		clock_fsys0: clock-controller@10e90000 {
+			compatible = "samsung,exynos7-clock-fsys0";
+			reg = <0x10e90000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>,
+				 <&clock_top1 DOUT_SCLK_MMC2>;
+			clock-names = "fin_pll", "dout_aclk_fsys0_200",
+				      "dout_sclk_mmc2";
+		};
+
+		clock_fsys1: clock-controller@156e0000 {
+			compatible = "samsung,exynos7-clock-fsys1";
+			reg = <0x156e0000 0xd00>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>,
+				 <&clock_top1 DOUT_SCLK_MMC0>,
+				 <&clock_top1 DOUT_SCLK_MMC1>;
+			clock-names = "fin_pll", "dout_aclk_fsys1_200",
+				      "dout_sclk_mmc0", "dout_sclk_mmc1";
+		};
+
+		serial_0: serial@13630000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13630000 0x100>;
+			interrupts = <0 440 0>;
+			clocks = <&clock_peric0 PCLK_UART0>,
+				 <&clock_peric0 SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@14c20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c20000 0x100>;
+			interrupts = <0 456 0>;
+			clocks = <&clock_peric1 PCLK_UART1>,
+				 <&clock_peric1 SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_2: serial@14c30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c30000 0x100>;
+			interrupts = <0 457 0>;
+			clocks = <&clock_peric1 PCLK_UART2>,
+				 <&clock_peric1 SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_3: serial@14c40000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x14c40000 0x100>;
+			interrupts = <0 458 0>;
+			clocks = <&clock_peric1 PCLK_UART3>,
+				 <&clock_peric1 SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		pinctrl_alive: pinctrl@10580000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x10580000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <0 16 0>;
+			};
+		};
+
+		pinctrl_bus0: pinctrl@13470000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x13470000 0x1000>;
+			interrupts = <0 383 0>;
+		};
+
+		pinctrl_nfc: pinctrl@14cd0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14cd0000 0x1000>;
+			interrupts = <0 473 0>;
+		};
+
+		pinctrl_touch: pinctrl@14ce0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14ce0000 0x1000>;
+			interrupts = <0 474 0>;
+		};
+
+		pinctrl_ff: pinctrl@14c90000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14c90000 0x1000>;
+			interrupts = <0 475 0>;
+		};
+
+		pinctrl_ese: pinctrl@14ca0000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x14ca0000 0x1000>;
+			interrupts = <0 476 0>;
+		};
+
+		pinctrl_fsys0: pinctrl@10e60000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x10e60000 0x1000>;
+			interrupts = <0 221 0>;
+		};
+
+		pinctrl_fsys1: pinctrl@15690000 {
+			compatible = "samsung,exynos7-pinctrl";
+			reg = <0x15690000 0x1000>;
+			interrupts = <0 203 0>;
+		};
+
+		hsi2c_0: hsi2c@13640000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13640000 0x1000>;
+			interrupts = <0 441 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: hsi2c@13650000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13650000 0x1000>;
+			interrupts = <0 442 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: hsi2c@14e60000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e60000 0x1000>;
+			interrupts = <0 459 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: hsi2c@14e70000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e70000 0x1000>;
+			interrupts = <0 460 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: hsi2c@13660000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13660000 0x1000>;
+			interrupts = <0 443 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: hsi2c@13670000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13670000 0x1000>;
+			interrupts = <0 444 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: hsi2c@14e00000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e00000 0x1000>;
+			interrupts = <0 461 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: hsi2c@13e10000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <0 462 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_8: hsi2c@14e20000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x14e20000 0x1000>;
+			interrupts = <0 463 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c8_bus>;
+			clocks = <&clock_peric1 PCLK_HSI2C8>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_9: hsi2c@13680000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13680000 0x1000>;
+			interrupts = <0 445 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c9_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C9>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_10: hsi2c@13690000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x13690000 0x1000>;
+			interrupts = <0 446 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c10_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C10>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_11: hsi2c@136a0000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x136a0000 0x1000>;
+			interrupts = <0 447 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c11_bus>;
+			clocks = <&clock_peric0 PCLK_HSI2C11>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		timer {
+			compatible = "arm,armv8-timer";
+			interrupts = <1 13 0xff01>,
+				     <1 14 0xff01>,
+				     <1 11 0xff01>,
+				     <1 10 0xff01>;
+		};
+
+		pmu_system_controller: system-controller@105c0000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x105c0000 0x5000>;
+		};
+
+		rtc: rtc@10590000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x10590000 0x100>;
+			interrupts = <0 355 0>, <0 356 0>;
+			clocks = <&clock_ccore PCLK_RTC>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		watchdog: watchdog@101d0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x101d0000 0x100>;
+			interrupts = <0 110 0>;
+			clocks = <&clock_peris PCLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		mmc_0: mmc@15740000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <0 201 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15740000 0x2000>;
+			clocks = <&clock_fsys1 ACLK_MMC0>,
+				 <&clock_top1 CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@15750000 {
+			compatible = "samsung,exynos7-dw-mshc";
+			interrupts = <0 202 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15750000 0x2000>;
+			clocks = <&clock_fsys1 ACLK_MMC1>,
+				 <&clock_top1 CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@15560000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			interrupts = <0 216 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x15560000 0x2000>;
+			clocks = <&clock_fsys0 ACLK_MMC2>,
+				 <&clock_top1 CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		adc: adc@13620000 {
+			compatible = "samsung,exynos7-adc";
+			reg = <0x13620000 0x100>;
+			interrupts = <0 448 0>;
+			clocks = <&clock_peric0 PCLK_ADCIF>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
+		pwm: pwm@136c0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x136c0000 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric0 PCLK_PWM>;
+			clock-names = "timers";
+		};
+	};
+};
+
+#include "exynos7-pinctrl.dtsi"
diff --git a/src/arm64/freescale/fsl-ls2085a-simu.dts b/src/arm64/freescale/fsl-ls2085a-simu.dts
new file mode 100644
index 000000000000..82e2a6fccc64
--- /dev/null
+++ b/src/arm64/freescale/fsl-ls2085a-simu.dts
@@ -0,0 +1,65 @@
+/*
+ * Device Tree file for Freescale LS2085a software Simulator model
+ *
+ * Copyright (C) 2014, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "fsl-ls2085a.dtsi"
+
+/ {
+	model = "Freescale Layerscape 2085a software Simulator model";
+	compatible = "fsl,ls2085a-simu", "fsl,ls2085a";
+
+	ethernet@2210000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x0 0x2210000 0x0 0x100>;
+		interrupts = <0 58 0x1>;
+	};
+};
diff --git a/src/arm64/freescale/fsl-ls2085a.dtsi b/src/arm64/freescale/fsl-ls2085a.dtsi
new file mode 100644
index 000000000000..e281ceb338c3
--- /dev/null
+++ b/src/arm64/freescale/fsl-ls2085a.dtsi
@@ -0,0 +1,163 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-2085A family SoC.
+ *
+ * Copyright (C) 2014, Freescale Semiconductor
+ *
+ * Bhupesh Sharma <bhupesh.sharma@freescale.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "fsl,ls2085a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		/*
+		 * We expect the enable-method for cpu's to be "psci", but this
+		 * is dependent on the SoC FW, which will fill this in.
+		 *
+		 * Currently supported enable-method is psci v0.2
+		 */
+
+		/* We have 4 clusters having 2 Cortex-A57 cores each */
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x1>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x100>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x200>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x201>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x300>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x301>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>;
+		      /* DRAM space - 1, size : 2 GB DRAM */
+	};
+
+	gic: interrupt-controller@6000000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <1 9 0x4>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
+			     <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
+			     <1 11 0x8>, /* Virtual PPI, active-low */
+			     <1 10 0x8>; /* Hypervisor PPI, active-low */
+	};
+
+	serial0: serial@21c0500 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0500 0x0 0x100>;
+		clock-frequency = <0>;	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	serial1: serial@21c0600 {
+		device_type = "serial";
+		compatible = "fsl,ns16550", "ns16550a";
+		reg = <0x0 0x21c0600 0x0 0x100>;
+		clock-frequency = <0>; 	/* Updated by bootloader */
+		interrupts = <0 32 0x1>; /* edge triggered */
+	};
+
+	fsl_mc: fsl-mc@80c000000 {
+		compatible = "fsl,qoriq-mc";
+		reg = <0x00000008 0x0c000000 0 0x40>,	 /* MC portal base */
+		      <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+	};
+};
diff --git a/src/arm64/mediatek/mt8173-evb.dts b/src/arm64/mediatek/mt8173-evb.dts
new file mode 100644
index 000000000000..43d54017b779
--- /dev/null
+++ b/src/arm64/mediatek/mt8173-evb.dts
@@ -0,0 +1,38 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt8173.dtsi"
+
+/ {
+	model = "mediatek,mt8173-evb";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen { };
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/src/arm64/mediatek/mt8173.dtsi b/src/arm64/mediatek/mt8173.dtsi
new file mode 100644
index 000000000000..8554ec31dd9e
--- /dev/null
+++ b/src/arm64/mediatek/mt8173.dtsi
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Eddie Huang <eddie.huang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "mediatek,mt8173";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend   = <0x84000001>;
+		cpu_off	      = <0x84000002>;
+		cpu_on	      = <0x84000003>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		sysirq: intpol-controller@10200620 {
+			compatible = "mediatek,mt8173-sysirq",
+					"mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200620 0 0x20>;
+		};
+
+		gic: interrupt-controller@10220000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x10221000 0 0x1000>,
+			      <0 0x10222000 0 0x2000>,
+			      <0 0x10224000 0 0x2000>,
+			      <0 0x10226000 0 0x2000>;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8173-uart",
+					"mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8173-uart",
+					"mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8173-uart",
+					"mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+
+		uart3: serial@11005000 {
+			compatible = "mediatek,mt8173-uart",
+					"mediatek,mt6577-uart";
+			reg = <0 0x11005000 0 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&uart_clk>;
+			status = "disabled";
+		};
+	};
+
+};
+
diff --git a/src/arm64/skeleton.dtsi b/src/arm64/skeleton.dtsi
new file mode 100644
index 000000000000..38ead821bb42
--- /dev/null
+++ b/src/arm64/skeleton.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Skeleton device tree; the bare minimum needed to boot; just include and
+ * add a compatible value.  The bootloader will typically populate the memory
+ * node.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+	memory { device_type = "memory"; reg = <0 0 0>; };
+};