diff options
124 files changed, 46417 insertions, 28206 deletions
@@ -29,6 +29,12 @@ the development of OpenBSM: Stacey Son Todd Heberlein Gary Hoo + Dave Bertouille + Jonathan Anderson + Pawel Jakub Dawidek + Joel Dahl + Ryan Steinmetz + The FreeBSD Foundation In addition, Coverity, Inc.'s Prevent(tm) static analysis tool and Gimpel Software's FlexeLint tool were used to identify a number of bugs in the @@ -14,6 +14,12 @@ force the compile to fail if a warning is found: CFLAGS="-Wall -Werror" ./configure +On Linux systems, OpenSSL headers may have to be installed to support +encryption of on-the-wire audit streams using auditdistd; the following +appears to work on Ubuntu: + + sudo apt-get install libssl-dev + To install the library, binaries, and man pages, use: make install @@ -2,34 +2,37 @@ OpenBSM Copyrights and Licensing OpenBSM is covered by a number of copyrights, with licenses being either two or three clause BSD licenses. Individual file headers should be consulted -for specific copyrights on specific components. The TrustedBSD Project would -appreciate the contribution of fixes and enhancements under identical or -substantially similar licenses: +for copyrights on specific elements of the distribution. - * Copyright (c) <year> <copyright holder> - * All rights reserved. - * - * <any additional comments or credits> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. +The following copyright and license are asserted over the OpenBSM distribution +as a whole: -$P4: //depot/projects/trustedbsd/openbsm/LICENSE#5 $ + Copyright (c) 2005-2012 Robert N.M. Watson + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. + +The TrustedBSD Project would appreciate the contribution of fixes and +enhancements under an identical license in order to avoid potentially +confusing license proliferation. + +$P4: //depot/projects/trustedbsd/openbsm/LICENSE#6 $ diff --git a/Makefile.am b/Makefile.am index 55849cc54354..50731336e55d 100644 --- a/Makefile.am +++ b/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/Makefile.am#4 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/Makefile.am#5 $ +## SUBDIRS = \ bsm @@ -17,6 +17,7 @@ SUBDIRS += \ modules \ sys +ACLOCAL_AMFLAGS = -I m4 EXTRA_DIST = \ CHANGELOG \ diff --git a/Makefile.in b/Makefile.in index 6900bd4976a5..9f90493d6176 100644 --- a/Makefile.in +++ b/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,14 +13,28 @@ # PARTICULAR PURPOSE. @SET_MAKE@ - -# -# $P4: //depot/projects/trustedbsd/openbsm/Makefile.in#10 $ -# VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -40,10 +54,14 @@ host_triplet = @host@ subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(top_srcdir)/config/config.h.in \ - $(top_srcdir)/configure INSTALL NEWS TODO config/config.guess \ - config/config.sub config/depcomp config/install-sh \ - config/ltmain.sh config/missing + $(srcdir)/Makefile.in $(top_srcdir)/config/config.guess \ + $(top_srcdir)/config/config.h.in \ + $(top_srcdir)/config/config.sub \ + $(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \ + $(top_srcdir)/config/missing $(top_srcdir)/configure INSTALL \ + NEWS TODO config/config.guess config/config.sub config/depcomp \ + config/install-sh config/ltmain.sh config/missing \ + config/ylwrap ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -53,6 +71,7 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ @@ -62,21 +81,61 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + cscope distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags +CSCOPE = cscope DIST_SUBDIRS = bsm libauditd libbsm bin man modules sys DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best +DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ @@ -90,45 +149,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -137,13 +203,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -190,6 +258,7 @@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ SUBDIRS = bsm $(am__append_1) libbsm bin man modules sys +ACLOCAL_AMFLAGS = -I m4 EXTRA_DIST = \ CHANGELOG \ LICENSE \ @@ -200,21 +269,21 @@ EXTRA_DIST = \ all: all-recursive .SUFFIXES: -am--refresh: +am--refresh: Makefile @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ - cd $(srcdir) && $(AUTOMAKE) --foreign \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ && exit 0; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -230,21 +299,20 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(srcdir) && $(AUTOCONF) + $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): config/config.h: config/stamp-h1 - @if test ! -f $@; then \ - rm -f config/stamp-h1; \ - $(MAKE) $(AM_MAKEFLAGS) config/stamp-h1; \ - else :; fi + @if test ! -f $@; then rm -f config/stamp-h1; else :; fi + @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) config/stamp-h1; else :; fi config/stamp-h1: $(top_srcdir)/config/config.h.in $(top_builddir)/config.status @rm -f config/stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config/config.h $(top_srcdir)/config/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_srcdir) && $(AUTOHEADER) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) rm -f config/stamp-h1 touch $@ @@ -258,16 +326,16 @@ clean-libtool: -rm -rf .libs _libs distclean-libtool: - -rm -f libtool + -rm -f libtool config.lt # This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -276,7 +344,11 @@ $(RECURSIVE_TARGETS): done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -284,50 +356,23 @@ $(RECURSIVE_TARGETS): else \ local_target="$$target"; \ fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done +cscopelist-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) @@ -335,14 +380,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ @@ -354,7 +399,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ @@ -363,36 +408,65 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) + +clean-cscope: + -rm -f cscope.files + +cscope.files: clean-cscope cscopelist-recursive cscopelist + +cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files distdir: $(DISTFILES) $(am__remove_distdir) - test -d $(distdir) || mkdir $(distdir) + test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -408,66 +482,84 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ + am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ done - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) + || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) + $(am__post_remove_distdir) dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) -dist-lzma: distdir - tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma - $(am__remove_distdir) +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) + $(am__post_remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) + $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) + $(am__post_remove_distdir) -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another @@ -475,26 +567,31 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ - unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac - chmod -R a-w $(distdir); chmod a+w $(distdir) + chmod -R a-w $(distdir); chmod u+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ @@ -515,14 +612,24 @@ distcheck: dist && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: - @cd $(distuninstallcheck_dir) \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ @@ -553,16 +660,22 @@ install-am: all-am installcheck: installcheck-recursive install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -583,6 +696,8 @@ dvi-am: html: html-recursive +html-am: + info: info-recursive info-am: @@ -591,18 +706,28 @@ install-data-am: install-dvi: install-dvi-recursive +install-dvi-am: + install-exec-am: install-html: install-html-recursive +install-html-am: + install-info: install-info-recursive +install-info-am: + install-man: install-pdf: install-pdf-recursive +install-pdf-am: + install-ps: install-ps-recursive +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-recursive @@ -625,24 +750,27 @@ ps-am: uninstall-am: -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \ + cscopelist-recursive ctags-recursive install-am install-strip \ + tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am am--refresh check check-am clean clean-generic \ - clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ - dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \ - distclean distclean-generic distclean-hdr distclean-libtool \ - distclean-tags distcleancheck distdir distuninstallcheck dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dvi install-dvi-am \ - install-exec install-exec-am install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs installdirs-am \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-recursive uninstall uninstall-am + all all-am am--refresh check check-am clean clean-cscope \ + clean-generic clean-libtool cscope cscopelist \ + cscopelist-recursive ctags ctags-recursive dist dist-all \ + dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ dist-xz \ + dist-zip distcheck distclean distclean-generic distclean-hdr \ + distclean-libtool distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-recursive uninstall uninstall-am + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. @@ -1,5 +1,30 @@ OpenBSM Version History +OpenBSM 1.2 alpha 2 + +- auditdistd, a distributed audit trail management daemon, has now been + merged. This allows trail files to be securely and reliably synced from + audited hosts to an audit server, and employs TLS encryption. Where + available, it uses Capsicum to sandbox the service. This work was + contributed by Pawel Jakub Dawidek under sponsorship from the FreeBSD + Foundation. + +OpenBSM 1.2 alpha 1 + +- Add Capsicum-related error numbers for FreeBSD: ENOTCAPABLE, ECAPMODE. +- Add Capsicum, process descriptor audit events for FreeBSD. +- Allow 0% minspace. +- Fixes from the clang static analyser. +- Fix expiration of trail files when the host parameter is used. +- Various typo fixes. +- Support for Solaris privilege and privilege set tokens. +- Documentation for getachost(), improvements for getacfilesz(). +- Fix a directory descriptor leak that happened when audit trail partitions + filled. +- Support for more Linux distributions with a partial contemporary endian.h. +- Improved escaping of XML-encapsulated BSM. +- A variety of minor documentation, style, and functional. + OpenBSM 1.1p2 - Fix audit_event definitions of AUE_OPENAT_RWT and AUE_OPENAT_RWTC. @@ -464,4 +489,4 @@ OpenBSM 1.0 alpha 1 to support reloading of kernel event table. - Allow comments in /etc/security configuration files. -$P4: //depot/projects/trustedbsd/openbsm/NEWS#43 $ +$P4: //depot/projects/trustedbsd/openbsm/NEWS#53 $ @@ -1,4 +1,4 @@ -OpenBSM 1.1p2 +OpenBSM 1.2a2 Introduction @@ -38,6 +38,7 @@ The following programs are included with OpenBSM: audit Command line audit control tool auditd Audit management daemon + auditdistd Audit trail distribution daemon auditfilterd Experimental event monitoring framework auditreduce Audit trail reduction tool audump Debugging tool to parse and print audit databases @@ -64,4 +65,4 @@ Information on TrustedBSD may be found on the TrustedBSD home page: http://www.TrustedBSD.org/ -$P4: //depot/projects/trustedbsd/openbsm/README#37 $ +$P4: //depot/projects/trustedbsd/openbsm/README#41 $ @@ -21,5 +21,7 @@ OpenBSM TODO alternative locations can be used. - NLS support for au_strerror(3), which provides error strings for BSM errors not available on the local OS platform. +- Support for client certificates in auditdistd, to include certificate chain + validation. -$P4: //depot/projects/trustedbsd/openbsm/TODO#13 $ +$P4: //depot/projects/trustedbsd/openbsm/TODO#14 $ @@ -1 +1 @@ -OPENBSM_1_1p2 +OPENBSM_1_2alpha2 diff --git a/aclocal.m4 b/aclocal.m4 index 6c3125564ad6..34e291630d4e 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1,7 +1,7 @@ -# generated automatically by aclocal 1.10.1 -*- Autoconf -*- +# generated automatically by aclocal 1.12.2 -*- Autoconf -*- + +# Copyright (C) 1996-2012 Free Software Foundation, Inc. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,108 +13,206 @@ m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(AC_AUTOCONF_VERSION, [2.62],, -[m4_warning([this file was generated for autoconf 2.62. +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically `autoreconf'.])]) +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +]) -# serial 52 AC_PROG_LIBTOOL +# serial 57 LT_INIT -# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) -# ----------------------------------------------------------- -# If this macro is not defined by Autoconf, define it here. -m4_ifdef([AC_PROVIDE_IFELSE], - [], - [m4_define([AC_PROVIDE_IFELSE], - [m4_ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) -# AC_PROG_LIBTOOL -# --------------- -AC_DEFUN([AC_PROG_LIBTOOL], -[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl -dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX -dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. - AC_PROVIDE_IFELSE([AC_PROG_CXX], - [AC_LIBTOOL_CXX], - [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX - ])]) -dnl And a similar setup for Fortran 77 support - AC_PROVIDE_IFELSE([AC_PROG_F77], - [AC_LIBTOOL_F77], - [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 -])]) - -dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. -dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run -dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. - AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], - [AC_LIBTOOL_GCJ], - [ifdef([AC_PROG_GCJ], - [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([A][M_PROG_GCJ], - [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) - ifdef([LT_AC_PROG_GCJ], - [define([LT_AC_PROG_GCJ], - defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) -])])# AC_PROG_LIBTOOL - - -# _AC_PROG_LIBTOOL -# ---------------- -AC_DEFUN([_AC_PROG_LIBTOOL], -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl -AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl -AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl -AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" +LIBTOOL_DEPS="$ltmain" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl -# Prevent multiple expansion -define([AC_PROG_LIBTOOL], []) -])# _AC_PROG_LIBTOOL +_LT_SETUP +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT -# AC_LIBTOOL_SETUP -# ---------------- -AC_DEFUN([AC_LIBTOOL_SETUP], -[AC_PREREQ(2.50)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +m4_defun([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl -AC_REQUIRE([AC_PROG_NM])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl +_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl +dnl +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl AC_REQUIRE([AC_PROG_LN_S])dnl -AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -AC_REQUIRE([AC_OBJEXT])dnl -AC_REQUIRE([AC_EXEEXT])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl dnl -AC_LIBTOOL_SYS_MAX_CMD_LEN -AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -AC_LIBTOOL_OBJDIR +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_WITH_SYSROOT])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl -_LT_AC_PROG_ECHO_BACKSLASH +m4_require([_LT_TAG_COMPILER])dnl case $host_os in aix3*) @@ -128,118 +226,706 @@ aix3*) ;; esac -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] - -# Same as above, but do not quote variable references. -[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Constants: -rm="rm -f" - # Global variables: -default_ofile=libtool +ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" -AC_CHECK_TOOL(AR, ar, false) -AC_CHECK_TOOL(RANLIB, ranlib, :) -AC_CHECK_TOOL(STRIP, strip, :) +with_gnu_ld="$lt_cv_prog_gnu_ld" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then - AC_PATH_MAGIC + _LT_PATH_MAGIC fi ;; esac -_LT_REQUIRED_DARWIN_CHECKS +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + -AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -enable_win32_dll=yes, enable_win32_dll=no) +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' -AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' -AC_ARG_WITH([pic], - [AC_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) -test -z "$pic_mode" && pic_mode=default +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' -# Use C for the default configuration in the libtool script -tagname= -AC_LIBTOOL_LANG_C_CONFIG -_LT_AC_TAGCONFIG -])# AC_LIBTOOL_SETUP +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from `configure', and `config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# `config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain="$ac_aux_dir/ltmain.sh" +])# _LT_PROG_LTMAIN + + + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the `libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to `config.status' so that its +# declaration there will have the same value as in `configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags="_LT_TAGS"dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) -# _LT_AC_SYS_COMPILER +# _LT_CONFIG_COMMANDS # ------------------- -AC_DEFUN([_LT_AC_SYS_COMPILER], +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# `#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test $lt_write_fail = 0 && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to <bug-libtool@gnu.org>." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2011 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test $[#] != 0 +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try \`$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try \`$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +_LT_COPYING +_LT_LIBTOOL_TAGS + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + _LT_PROG_REPLACE_SHELLFNS + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Go], [_LT_LANG(GO)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +m4_ifndef([AC_PROG_GO], [ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_GO. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +m4_defun([AC_PROG_GO], +[AC_LANG_PUSH(Go)dnl +AC_ARG_VAR([GOC], [Go compiler command])dnl +AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl +_AC_ARG_VAR_LDFLAGS()dnl +AC_CHECK_TOOL(GOC, gccgo) +if test -z "$GOC"; then + if test -n "$ac_tool_prefix"; then + AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) + fi +fi +if test -z "$GOC"; then + AC_CHECK_PROG(GOC, gccgo, gccgo, false) +fi +])#m4_defun +])#m4_ifndef + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([AC_PROG_GO], + [LT_LANG(GO)], + [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} @@ -248,36 +934,20 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC -])# _LT_AC_SYS_COMPILER - - -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -AC_DEFUN([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -]) +])# _LT_TAG_COMPILER # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. -AC_DEFUN([_LT_COMPILER_BOILERPLATE], -[AC_REQUIRE([LT_AC_PROG_SED])dnl +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* +$RM conftest* ])# _LT_COMPILER_BOILERPLATE @@ -285,40 +955,65 @@ $rm conftest* # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. -AC_DEFUN([_LT_LINKER_BOILERPLATE], -[AC_REQUIRE([LT_AC_PROG_SED])dnl +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* +$RM -r conftest* ])# _LT_LINKER_BOILERPLATE # _LT_REQUIRED_DARWIN_CHECKS -# -------------------------- -# Check for some things on darwin -AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[ +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ case $host_os in rhapsody* | darwin*) AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], [lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - echo "int foo(void){return 1;}" > conftest.c - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib ${wl}-single_module conftest.c - if test -f libconftest.dylib; then - lt_cv_apple_cc_single_mod=yes - rm -rf libconftest.dylib* - fi - rm conftest.c + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* fi]) + AC_CACHE_CHECK([for -exported_symbols_list linker flag], [lt_cv_ld_exported_symbols_list], [lt_cv_ld_exported_symbols_list=no @@ -326,26 +1021,54 @@ AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[ echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [lt_cv_ld_exported_symbols_list=yes], - [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS="$save_LDFLAGS" + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS="$save_LDFLAGS" + ]) + + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM ]) case $host_os in - rhapsody* | darwin1.[[0123]]) + rhapsody* | darwin1.[[012]]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[[012]]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[[012]]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac @@ -355,10 +1078,10 @@ AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else - _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi - if test "$DSYMUTIL" != ":"; then - _lt_dsymutil="~$DSYMUTIL \$lib || :" + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi @@ -366,206 +1089,189 @@ AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[ esac ]) -# _LT_AC_SYS_LIBPATH_AIX -# ---------------------- + +# _LT_DARWIN_LINKER_FEATURES([TAG]) +# --------------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], + [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + m4_if([$1], [CXX], +[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) +# ---------------------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. -AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_AC_SYS_LIBPATH_AIX - - -# _LT_AC_SHELL_INIT(ARG) -# ---------------------- -AC_DEFUN([_LT_AC_SHELL_INIT], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -$1 -AC_DIVERT_POP -])# _LT_AC_SHELL_INIT - - -# _LT_AC_PROG_ECHO_BACKSLASH -# -------------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], -[_LT_AC_SHELL_INIT([ -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -echo=${ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : +# Store the results from the different compilers for each TAGNAME. +# Allow to override them for all tags through lt_cv_aix_libpath. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} + AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], + [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ + lt_aix_libpath_sed='[ + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }]' + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" + fi + ]) + aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) fi +])# _LT_SYS_MODULE_PATH_AIX -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF -[$]* -EOF - exit 0 -fi -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string=`eval $cmd`) 2>/dev/null && - echo_test_string=`eval $cmd` && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script which will find a shell with a builtin +# printf (which we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: +case "$ECHO" in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi -AC_SUBST(ECHO) -])])# _LT_AC_PROG_ECHO_BACKSLASH +# _LT_WITH_SYSROOT +# ---------------- +AC_DEFUN([_LT_WITH_SYSROOT], +[AC_MSG_CHECKING([for sysroot]) +AC_ARG_WITH([sysroot], +[ --with-sysroot[=DIR] Search for dependent libraries within DIR + (or the compiler's sysroot if not specified).], +[], [with_sysroot=no]) + +dnl lt_sysroot will always be passed unquoted. We quote it here +dnl in case the user passed a directory name. +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + AC_MSG_RESULT([${with_sysroot}]) + AC_MSG_ERROR([The sysroot must be an absolute path.]) + ;; +esac + AC_MSG_RESULT([${lt_sysroot:-no}]) +_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl +[dependent libraries, and in which our libraries should be installed.])]) -# _LT_AC_LOCK -# ----------- -AC_DEFUN([_LT_AC_LOCK], +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], [AC_ARG_ENABLE([libtool-lock], - [AC_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good @@ -576,93 +1282,93 @@ ia64-*-hpux*) echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|sparc*-*linux*) +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; esac fi rm -rf conftest* @@ -674,23 +1380,36 @@ s390*-*linux*|sparc*-*linux*) CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) - AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; -sparc*-*solaris*) +*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" fi ;; @@ -700,30 +1419,105 @@ sparc*-*solaris*) fi rm -rf conftest* ;; - -AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw* | *-*-pw32*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; - ]) esac need_locks="$enable_libtool_lock" +])# _LT_ENABLE_LOCK + + +# _LT_PROG_AR +# ----------- +m4_defun([_LT_PROG_AR], +[AC_CHECK_TOOLS(AR, [ar], false) +: ${AR=ar} +: ${AR_FLAGS=cru} +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], + [lt_cv_ar_at_file=no + AC_COMPILE_IFELSE([AC_LANG_PROGRAM], + [echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + ]) + ]) + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi +_LT_DECL([], [archiver_list_spec], [1], + [How to feed a file listing to the archiver]) +])# _LT_PROG_AR -])# _LT_AC_LOCK +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[_LT_PROG_AR + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= -# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], -[AC_REQUIRE([LT_AC_PROG_SED]) +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no - ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or @@ -735,37 +1529,43 @@ AC_CACHE_CHECK([$1], [$2], -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi - $rm conftest* + $RM conftest* ]) if test x"[$]$2" = xyes; then - ifelse([$5], , :, [$5]) + m4_if([$5], , :, [$5]) else - ifelse([$6], , :, [$6]) + m4_if([$6], , :, [$6]) fi -])# AC_LIBTOOL_COMPILER_OPTION +])# _LT_COMPILER_OPTION +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) -# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ------------------------------------------------------------ -# Check whether the given compiler option works -AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], -[AC_REQUIRE([LT_AC_PROG_SED])dnl + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" @@ -777,7 +1577,7 @@ AC_CACHE_CHECK([$1], [$2], if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes @@ -786,22 +1586,28 @@ AC_CACHE_CHECK([$1], [$2], $2=yes fi fi - $rm -r conftest* + $RM -r conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then - ifelse([$4], , :, [$4]) + m4_if([$4], , :, [$4]) else - ifelse([$5], , :, [$5]) + m4_if([$5], , :, [$5]) fi -])# AC_LIBTOOL_LINKER_OPTION +])# _LT_LINKER_OPTION +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) -# AC_LIBTOOL_SYS_MAX_CMD_LEN -# -------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], -[# find the maximum length of command line arguments + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 @@ -823,7 +1629,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl lt_cv_sys_max_cmd_len=-1; ;; - cygwin* | mingw*) + cygwin* | mingw* | cegcc*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, @@ -834,6 +1640,11 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl lt_cv_sys_max_cmd_len=8192; ;; + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. @@ -859,6 +1670,11 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl lt_cv_sys_max_cmd_len=196608 ;; + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not @@ -878,7 +1694,7 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi @@ -889,20 +1705,28 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ - = "XX$teststring") >/dev/null 2>&1 && - new_result=`expr "X$teststring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` teststring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; @@ -913,28 +1737,36 @@ if test -n $lt_cv_sys_max_cmd_len ; then else AC_MSG_RESULT(none) fi -])# AC_LIBTOOL_SYS_MAX_CMD_LEN +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) -# _LT_AC_CHECK_DLFCN -# ------------------ -AC_DEFUN([_LT_AC_CHECK_DLFCN], -[AC_CHECK_HEADERS(dlfcn.h)dnl -])# _LT_AC_CHECK_DLFCN + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN -# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# --------------------------------------------------------------------- -AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<EOF -[#line __oline__ "configure" + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -975,11 +1807,13 @@ else # endif #endif -#ifdef __cplusplus -extern "C" void exit (int); +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); #endif -void fnord() { int i=42;} +int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -988,15 +1822,19 @@ int main () if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } /* dlclose (self); */ } else puts (dlerror ()); - exit (status); + return status; }] -EOF +_LT_EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? @@ -1011,13 +1849,13 @@ EOF fi fi rm -fr conftest* -])# _LT_AC_TRY_DLOPEN_SELF +])# _LT_TRY_DLOPEN_SELF -# AC_LIBTOOL_DLOPEN_SELF -# ---------------------- -AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], -[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown @@ -1033,15 +1871,15 @@ else lt_cv_dlopen_self=yes ;; - mingw* | pw32*) + mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= - ;; + ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= - ;; + ;; darwin*) # if libdl is installed we need to link against it @@ -1051,7 +1889,7 @@ else lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) - ;; + ;; *) AC_CHECK_FUNC([shl_load], @@ -1093,7 +1931,7 @@ else AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl - _LT_AC_TRY_DLOPEN_SELF( + _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) @@ -1101,8 +1939,8 @@ else if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) @@ -1124,19 +1962,32 @@ else *) enable_dlopen_self_static=unknown ;; esac fi -])# AC_LIBTOOL_DLOPEN_SELF +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) -# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) -# --------------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler -AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $rm -r conftest 2>/dev/null + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out @@ -1151,46 +2002,50 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD - $rm conftest* + $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out cd .. - rmdir conftest - $rm conftest* + $RM -r conftest + $RM conftest* ]) -])# AC_LIBTOOL_PROG_CC_C_O +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O -# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) -# ----------------------------------------- +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- # Check to see if we can do hard links to lock some files if needed -AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], -[AC_REQUIRE([_LT_AC_LOCK])dnl +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) hard_links="nottested" -if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then +if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes - $rm conftest* + $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no @@ -1203,12 +2058,13 @@ if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" else need_locks=no fi -])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS -# AC_LIBTOOL_OBJDIR -# ----------------- -AC_DEFUN([AC_LIBTOOL_OBJDIR], +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null @@ -1220,40 +2076,46 @@ else fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir -])# AC_LIBTOOL_OBJDIR +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR -# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) -# ---------------------------------------------- +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- # Check hardcoding attributes. -AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_AC_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ - test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ - test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - # We can hardcode non-existant directories. - if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && + # We can hardcode non-existent directories. + if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. - _LT_AC_TAGVAR(hardcode_action, $1)=relink + _LT_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_AC_TAGVAR(hardcode_action, $1)=immediate + _LT_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. - _LT_AC_TAGVAR(hardcode_action, $1)=unsupported + _LT_TAGVAR(hardcode_action, $1)=unsupported fi -AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) -if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then +if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || + test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || @@ -1261,74 +2123,79 @@ elif test "$shlibpath_overrides_runpath" = yes || # Fast installation is not necessary enable_fast_install=needless fi -])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH -# AC_LIBTOOL_SYS_LIB_STRIP -# ------------------------ -AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], -[striplib= +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) -fi - ;; - *) - AC_MSG_RESULT([no]) + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) ;; esac fi -])# AC_LIBTOOL_SYS_LIB_STRIP +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB -# AC_LIBTOOL_SYS_DYNAMIC_LINKER +# _LT_SYS_DYNAMIC_LINKER([TAG]) # ----------------------------- # PORTME Fill in your ld.so characteristics -AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], -[AC_REQUIRE([LT_AC_PROG_SED])dnl +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl AC_MSG_CHECKING([dynamic linker characteristics]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -m4_if($1,[],[ +m4_if([$1], + [], [ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= @@ -1341,7 +2208,7 @@ if test "$GCC" = yes; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done - lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; @@ -1361,10 +2228,29 @@ BEGIN {RS=" "; FS="/|\n";} { if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` - sys_lib_search_path_spec=`echo $lt_search_path_spec` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no @@ -1374,7 +2260,7 @@ need_version=unknown case $host_os in aix3*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH @@ -1383,7 +2269,7 @@ aix3*) ;; aix[[4-9]]*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes @@ -1401,7 +2287,7 @@ aix[[4-9]]*) aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no @@ -1427,9 +2313,18 @@ aix[[4-9]]*) ;; amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac ;; beos*) @@ -1439,7 +2334,7 @@ beos*) ;; bsdi[[45]]*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' @@ -1452,61 +2347,112 @@ bsdi[[45]]*) # libtool to hard-code these into programs ;; -cygwin* | mingw* | pw32*) +cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) + case $GCC,$cc_basename in + yes,*) + # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ - $rm \$dlpath' + $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) ;; - mingw*) + mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' ;; *) + # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' ;; esac - dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; @@ -1516,18 +2462,18 @@ darwin* | rhapsody*) version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' @@ -1535,10 +2481,6 @@ dgux*) shlibpath_var=LD_LIBRARY_PATH ;; -freebsd1*) - dynamic_linker=no - ;; - freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. @@ -1546,7 +2488,7 @@ freebsd* | dragonfly*) objformat=`/usr/bin/objformat` else case $host_os in - freebsd[[123]]*) objformat=aout ;; + freebsd[[23]].*) objformat=aout ;; *) objformat=elf ;; esac fi @@ -1564,7 +2506,7 @@ freebsd* | dragonfly*) esac shlibpath_var=LD_LIBRARY_PATH case $host_os in - freebsd2*) + freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) @@ -1584,12 +2526,26 @@ freebsd* | dragonfly*) ;; gnu*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; @@ -1615,18 +2571,18 @@ hpux9* | hpux10* | hpux11*) fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH @@ -1635,12 +2591,14 @@ hpux9* | hpux10* | hpux11*) soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 ;; interix[[3-9]]*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' @@ -1656,7 +2614,7 @@ irix5* | irix6* | nonstopux*) nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; @@ -1693,9 +2651,9 @@ linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -1703,6 +2661,22 @@ linux* | k*bsd*-gnu) finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. @@ -1710,7 +2684,7 @@ linux* | k*bsd*-gnu) # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi @@ -1727,7 +2701,7 @@ netbsd*) version_type=sunos need_lib_prefix=no need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' @@ -1742,20 +2716,22 @@ netbsd*) ;; newsos6) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; -nto-qnx*) - version_type=linux +*nto* | *qnx*) + version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' ;; openbsd*) @@ -1764,13 +2740,13 @@ openbsd*) need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no @@ -1809,7 +2785,7 @@ rdos*) ;; solaris*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -1834,7 +2810,7 @@ sunos4*) ;; sysv4 | sysv4.3*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH @@ -1842,7 +2818,6 @@ sysv4 | sysv4.3*) sni) shlibpath_overrides_runpath=no need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) @@ -1859,7 +2834,7 @@ sysv4 | sysv4.3*) sysv4*MP*) if test -d /usr/nec ;then - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH @@ -1873,13 +2848,12 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" @@ -1889,8 +2863,19 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) sys_lib_dlsearch_path_spec='/usr/lib' ;; +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + uts4*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH @@ -1903,288 +2888,60 @@ esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no -AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec], -[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"]) -sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec], -[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"]) -sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" - variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -])# AC_LIBTOOL_SYS_DYNAMIC_LINKER - -# _LT_AC_TAGCONFIG -# ---------------- -AC_DEFUN([_LT_AC_TAGCONFIG], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_ARG_WITH([tags], - [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], - [include additional configurations @<:@automatic@:>@])], - [tagnames="$withval"]) - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - AC_MSG_WARN([output file `$ofile' does not exist]) - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) - else - AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) - fi - fi - if test -z "$LTCFLAGS"; then - eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" - fi - - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in - "") ;; - *) AC_MSG_ERROR([invalid tag name: $tagname]) - ;; - esac - - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - AC_MSG_ERROR([tag name \"$tagname\" already exists]) - fi - - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_LIBTOOL_LANG_CXX_CONFIG - else - tagname="" - fi - ;; - - F77) - if test -n "$F77" && test "X$F77" != "Xno"; then - AC_LIBTOOL_LANG_F77_CONFIG - else - tagname="" - fi - ;; - - GCJ) - if test -n "$GCJ" && test "X$GCJ" != "Xno"; then - AC_LIBTOOL_LANG_GCJ_CONFIG - else - tagname="" - fi - ;; - - RC) - AC_LIBTOOL_LANG_RC_CONFIG - ;; - - *) - AC_MSG_ERROR([Unsupported tag name: $tagname]) - ;; - esac - - # Append the new tag name to the list of available tags. - if test -n "$tagname" ; then - available_tags="$available_tags $tagname" - fi - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" - else - rm -f "${ofile}T" - AC_MSG_ERROR([unable to update list of available tagged configurations.]) - fi +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi -])# _LT_AC_TAGCONFIG - - -# AC_LIBTOOL_DLOPEN -# ----------------- -# enable checks for dlopen support -AC_DEFUN([AC_LIBTOOL_DLOPEN], - [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_DLOPEN - - -# AC_LIBTOOL_WIN32_DLL -# -------------------- -# declare package support for building win32 DLLs -AC_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) -])# AC_LIBTOOL_WIN32_DLL - - -# AC_ENABLE_SHARED([DEFAULT]) -# --------------------------- -# implement the --enable-shared flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_SHARED], -[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([shared], - [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]AC_ENABLE_SHARED_DEFAULT) -])# AC_ENABLE_SHARED - - -# AC_DISABLE_SHARED -# ----------------- -# set the default shared flag to --disable-shared -AC_DEFUN([AC_DISABLE_SHARED], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no) -])# AC_DISABLE_SHARED - - -# AC_ENABLE_STATIC([DEFAULT]) -# --------------------------- -# implement the --enable-static flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_STATIC], -[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([static], - [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]AC_ENABLE_STATIC_DEFAULT) -])# AC_ENABLE_STATIC - - -# AC_DISABLE_STATIC -# ----------------- -# set the default static flag to --disable-static -AC_DEFUN([AC_DISABLE_STATIC], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no) -])# AC_DISABLE_STATIC - - -# AC_ENABLE_FAST_INSTALL([DEFAULT]) -# --------------------------------- -# implement the --enable-fast-install flag -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -AC_DEFUN([AC_ENABLE_FAST_INSTALL], -[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE([fast-install], - [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) -])# AC_ENABLE_FAST_INSTALL - - -# AC_DISABLE_FAST_INSTALL -# ----------------------- -# set the default to --disable-fast-install -AC_DEFUN([AC_DISABLE_FAST_INSTALL], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no) -])# AC_DISABLE_FAST_INSTALL - -# AC_LIBTOOL_PICMODE([MODE]) +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], + [Run-time system search path for libraries]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) # -------------------------- -# implement the --with-pic flag -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -AC_DEFUN([AC_LIBTOOL_PICMODE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -pic_mode=ifelse($#,1,$1,default) -])# AC_LIBTOOL_PICMODE - - -# AC_PROG_EGREP -# ------------- -# This is predefined starting with Autoconf 2.54, so this conditional -# definition can be removed once we require Autoconf 2.54 or later. -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], -[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], - [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi]) - EGREP=$ac_cv_prog_egrep - AC_SUBST([EGREP]) -])]) - - -# AC_PATH_TOOL_PREFIX -# ------------------- # find a file program which can recognize shared library -AC_DEFUN([AC_PATH_TOOL_PREFIX], -[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in @@ -2197,7 +2954,7 @@ AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. - ac_dummy="ifelse([$2], , $PATH, [$2])" + ac_dummy="m4_if([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. @@ -2212,7 +2969,7 @@ dnl not every word. This closes a longstanding sh security hole. $EGREP "$file_magic_regex" > /dev/null; then : else - cat <<EOF 1>&2 + cat <<_LT_EOF 1>&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. @@ -2223,7 +2980,7 @@ dnl not every word. This closes a longstanding sh security hole. *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org -EOF +_LT_EOF fi ;; esac fi @@ -2240,37 +2997,48 @@ if test -n "$MAGIC_CMD"; then else AC_MSG_RESULT(no) fi -])# AC_PATH_TOOL_PREFIX +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) -# AC_PATH_MAGIC -# ------------- + +# _LT_PATH_MAGIC +# -------------- # find a file program which can recognize a shared library -AC_DEFUN([AC_PATH_MAGIC], -[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then - AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi -])# AC_PATH_MAGIC +])# _LT_PATH_MAGIC -# AC_PROG_LD +# LT_PATH_LD # ---------- # find the pathname to the GNU or non-GNU linker -AC_DEFUN([AC_PROG_LD], -[AC_ARG_WITH([gnu-ld], - [AC_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no]) -AC_REQUIRE([LT_AC_PROG_SED])dnl -AC_REQUIRE([AC_PROG_CC])dnl +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. @@ -2287,9 +3055,9 @@ if test "$GCC" = yes; then [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; @@ -2339,15 +3107,24 @@ else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -])# AC_PROG_LD +_LT_PATH_LD_GNU +AC_SUBST([LD]) +_LT_TAGDECL([], [LD], [1], [The linker used to build libraries]) +])# LT_PATH_LD -# AC_PROG_LD_GNU -# -------------- -AC_DEFUN([AC_PROG_LD_GNU], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, +# Old names: +AU_ALIAS([AM_PROG_LD], [LT_PATH_LD]) +AU_ALIAS([AC_PROG_LD], [LT_PATH_LD]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_LD], []) +dnl AC_DEFUN([AC_PROG_LD], []) + + +# _LT_PATH_LD_GNU +#- -------------- +m4_defun([_LT_PATH_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU lds only accept -v. case `$LD -v 2>&1 </dev/null` in *GNU* | *'with BFD'*) @@ -2358,14 +3135,14 @@ case `$LD -v 2>&1 </dev/null` in ;; esac]) with_gnu_ld=$lt_cv_prog_gnu_ld -])# AC_PROG_LD_GNU +])# _LT_PATH_LD_GNU -# AC_PROG_LD_RELOAD_FLAG -# ---------------------- +# _LT_CMD_RELOAD +# -------------- # find reload flag for linker # -- PORTME Some linkers may need a different reload flag. -AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], +m4_defun([_LT_CMD_RELOAD], [AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, [lt_cv_ld_reload_flag='-r']) @@ -2376,6 +3153,11 @@ case $reload_flag in esac reload_cmds='$LD$reload_flag -o $output$reload_objs' case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test "$GCC" != yes; then + reload_cmds=false + fi + ;; darwin*) if test "$GCC" = yes; then reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' @@ -2384,15 +3166,19 @@ case $host_os in fi ;; esac -])# AC_PROG_LD_RELOAD_FLAG +_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl +_LT_TAGDECL([], [reload_cmds], [2])dnl +])# _LT_CMD_RELOAD -# AC_DEPLIBS_CHECK_METHOD -# ----------------------- +# _LT_CHECK_MAGIC_METHOD +# ---------------------- # how to check for library dependencies # -- PORTME fill in with the dynamic library characteristics -AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], -[AC_CACHE_CHECK([how to recognize dependent libraries], +m4_defun([_LT_CHECK_MAGIC_METHOD], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +AC_CACHE_CHECK([how to recognize dependent libraries], lt_cv_deplibs_check_method, [lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= @@ -2433,21 +3219,29 @@ mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. @@ -2466,6 +3260,10 @@ gnu*) lt_cv_deplibs_check_method=pass_all ;; +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in @@ -2474,11 +3272,11 @@ hpux10.20* | hpux11*) lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac @@ -2499,13 +3297,13 @@ irix5* | irix6* | nonstopux*) lt_cv_deplibs_check_method=pass_all ;; -# This must be Linux ELF. -linux* | k*bsd*-gnu) +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' @@ -2518,12 +3316,12 @@ newos6*) lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; -nto-qnx*) - lt_cv_deplibs_check_method=unknown +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all ;; openbsd*) - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' @@ -2542,6 +3340,10 @@ solaris*) lt_cv_deplibs_check_method=pass_all ;; +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + sysv4 | sysv4.3*) case $host_vendor in motorola) @@ -2569,22 +3371,47 @@ sysv4 | sysv4.3*) esac ;; -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +tpf*) lt_cv_deplibs_check_method=pass_all ;; esac ]) + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` + fi + ;; + esac +fi + file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown -])# AC_DEPLIBS_CHECK_METHOD + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method = "file_magic"]) +_LT_DECL([], [file_magic_glob], [1], + [How to find potential files when deplibs_check_method = "file_magic"]) +_LT_DECL([], [want_nocaseglob], [1], + [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD -# AC_PROG_NM +# LT_PATH_NM # ---------- -# find the pathname to a BSD-compatible name lister -AC_DEFUN([AC_PROG_NM], -[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" @@ -2626,2179 +3453,184 @@ else done IFS="$lt_save_ifs" done - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + : ${lt_cv_path_NM=no} fi]) -NM="$lt_cv_path_NM" -])# AC_PROG_NM - - -# AC_CHECK_LIBM -# ------------- -# check for math library -AC_DEFUN([AC_CHECK_LIBM], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -])# AC_CHECK_LIBM - - -# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl convenience library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-convenience to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, -# it is assumed to be `libltdl'. LIBLTDL will be prefixed with -# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' -# (note the single quotes!). If your package is not flat and you're not -# using automake, define top_builddir and top_srcdir appropriately in -# the Makefiles. -AC_DEFUN([AC_LIBLTDL_CONVENIENCE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case $enable_ltdl_convenience in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_CONVENIENCE - - -# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) -# ----------------------------------- -# sets LIBLTDL to the link flags for the libltdl installable library and -# LTDLINCL to the include flags for the libltdl header and adds -# --enable-ltdl-install to the configure arguments. Note that -# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, -# and an installed libltdl is not found, it is assumed to be `libltdl'. -# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and top_srcdir -# appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN([AC_LIBLTDL_INSTALLABLE], -[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, lt_dlinit, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - LTDLINCL= - fi - # For backwards non-gettext consistent compatibility... - INCLTDL="$LTDLINCL" -])# AC_LIBLTDL_INSTALLABLE - - -# AC_LIBTOOL_CXX -# -------------- -# enable support for C++ libraries -AC_DEFUN([AC_LIBTOOL_CXX], -[AC_REQUIRE([_LT_AC_LANG_CXX]) -])# AC_LIBTOOL_CXX - - -# _LT_AC_LANG_CXX -# --------------- -AC_DEFUN([_LT_AC_LANG_CXX], -[AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([_LT_AC_PROG_CXXCPP]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) -])# _LT_AC_LANG_CXX - -# _LT_AC_PROG_CXXCPP -# ------------------ -AC_DEFUN([_LT_AC_PROG_CXXCPP], -[ -AC_REQUIRE([AC_PROG_CXX]) -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_PROG_CXXCPP -fi -])# _LT_AC_PROG_CXXCPP - -# AC_LIBTOOL_F77 -# -------------- -# enable support for Fortran 77 libraries -AC_DEFUN([AC_LIBTOOL_F77], -[AC_REQUIRE([_LT_AC_LANG_F77]) -])# AC_LIBTOOL_F77 - - -# _LT_AC_LANG_F77 -# --------------- -AC_DEFUN([_LT_AC_LANG_F77], -[AC_REQUIRE([AC_PROG_F77]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) -])# _LT_AC_LANG_F77 - - -# AC_LIBTOOL_GCJ -# -------------- -# enable support for GCJ libraries -AC_DEFUN([AC_LIBTOOL_GCJ], -[AC_REQUIRE([_LT_AC_LANG_GCJ]) -])# AC_LIBTOOL_GCJ - - -# _LT_AC_LANG_GCJ -# --------------- -AC_DEFUN([_LT_AC_LANG_GCJ], -[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], - [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], - [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], - [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], - [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) -])# _LT_AC_LANG_GCJ - - -# AC_LIBTOOL_RC -# ------------- -# enable support for Windows resource files -AC_DEFUN([AC_LIBTOOL_RC], -[AC_REQUIRE([LT_AC_PROG_RC]) -_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) -])# AC_LIBTOOL_RC - - -# AC_LIBTOOL_LANG_C_CONFIG -# ------------------------ -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) -AC_DEFUN([_LT_AC_LANG_C_CONFIG], -[lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) -AC_LIBTOOL_SYS_LIB_STRIP -AC_LIBTOOL_DLOPEN_SELF - -# Report which library types will actually be built -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) - -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_C_CONFIG - - -# AC_LIBTOOL_LANG_CXX_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) -AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], -[AC_LANG_PUSH(C++) -AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([_LT_AC_PROG_CXXCPP]) - -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_AC_TAGVAR(allow_undefined_flag, $1)= -_LT_AC_TAGVAR(always_export_symbols, $1)=no -_LT_AC_TAGVAR(archive_expsym_cmds, $1)= -_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_direct, $1)=no -_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -_LT_AC_TAGVAR(hardcode_minus_L, $1)=no -_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -_LT_AC_TAGVAR(hardcode_automatic, $1)=no -_LT_AC_TAGVAR(module_cmds, $1)= -_LT_AC_TAGVAR(module_expsym_cmds, $1)= -_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_AC_TAGVAR(no_undefined_flag, $1)= -_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= -_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Dependencies to place before and after the object being linked: -_LT_AC_TAGVAR(predep_objects, $1)= -_LT_AC_TAGVAR(postdep_objects, $1)= -_LT_AC_TAGVAR(predeps, $1)= -_LT_AC_TAGVAR(postdeps, $1)= -_LT_AC_TAGVAR(compiler_lib_search_path, $1)= -_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)= - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_LD=$LD -lt_save_GCC=$GCC -GCC=$GXX -lt_save_with_gnu_ld=$with_gnu_ld -lt_save_path_LD=$lt_cv_path_LD -if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" else - $as_unset lt_cv_prog_gnu_ld -fi -if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX -else - $as_unset lt_cv_path_LD -fi -test -z "${LDCXX+set}" || LD=$LDCXX -CC=${CXX-"c++"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) - -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' -else - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= -fi - -if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - AC_PROG_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - fi + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - -else - GXX=no - with_gnu_ld=no - wlarc= -fi - -# PORTME: fill in a description of your system's C++ link characteristics -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -_LT_AC_TAGVAR(ld_shlibs, $1)=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - if test "$GXX" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - darwin* | rhapsody*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" - if test "$GXX" = yes ; then - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - if test "$lt_cv_apple_cc_single_mod" != "yes"; then - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" - fi - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - fi - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - freebsd[[12]]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - freebsd-elf*) - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_AC_TAGVAR(ld_shlibs, $1)=yes - ;; - gnu*) - ;; - hpux9*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" ;; *) - if test "$GXX" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi + DUMPBIN=: ;; esac - ;; - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) ;; - *) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - interix[[3-9]]*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' - fi - fi - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc*) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - m88k*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - openbsd2*) - # C++ shared libraries are fairly broken - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd='echo' - else - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - osf3*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ - $rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - ;; - esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | grep -v '^2\.7' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - fi - - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - # So that behaviour is only enabled if SCOABSPATH is set to a - # non-empty value in the environment. Most likely only useful for - # creating official distributions of packages. - # This is a hack until libtool officially supports absolute path - # names for shared libraries. - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' + fi + AC_SUBST([DUMPBIN]) + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + +# _LT_CHECK_SHAREDLIB_FROM_LINKLIB +# -------------------------------- +# how to determine the name of the shared library +# associated with a specific link library. +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +m4_require([_LT_DECL_DLLTOOL]) +AC_CACHE_CHECK([how to associate runtime and link libraries], +lt_cv_sharedlib_from_linklib_cmd, +[lt_cv_sharedlib_from_linklib_cmd='unknown' - case $cc_basename in - CC*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib ;; *) - # FIXME: insert proper C++ library support - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; -esac -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -_LT_AC_TAGVAR(GCC, $1)="$GXX" -_LT_AC_TAGVAR(LD, $1)="$LD" - -AC_LIBTOOL_POSTDEP_PREDEP($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC=$lt_save_CC -LDCXX=$LD -LD=$lt_save_LD -GCC=$lt_save_GCC -with_gnu_ldcxx=$with_gnu_ld -with_gnu_ld=$lt_save_with_gnu_ld -lt_cv_path_LDCXX=$lt_cv_path_LD -lt_cv_path_LD=$lt_save_path_LD -lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -])# AC_LIBTOOL_LANG_CXX_CONFIG - -# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) -# ------------------------------------ -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP], -[AC_REQUIRE([LT_AC_PROG_SED])dnl -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -ifelse([$1],[],[cat > conftest.$ac_ext <<EOF -int a; -void foo (void) { a = 0; } -EOF -],[$1],[CXX],[cat > conftest.$ac_ext <<EOF -class Foo -{ -public: - Foo (void) { a = 0; } -private: - int a; -}; -EOF -],[$1],[F77],[cat > conftest.$ac_ext <<EOF - subroutine foo - implicit none - integer*4 a - a=0 - return - end -EOF -],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF -public class foo { - private int a; - public void bar (void) { - a = 0; - } -}; -EOF -]) -dnl Parse the compiler output and extract the necessary -dnl objects, libraries and library flags. -if AC_TRY_EVAL(ac_compile); then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - # The `*' in the case matches for architectures that use `case' in - # $output_verbose_cmd can trigger glob expansion during the loop - # eval without this substitution. - output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` - - for p in `eval $output_verbose_link_cmd`; do - case $p in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" \ - || test $p = "-R"; then - prev=$p - continue - else - prev= - fi - - if test "$pre_test_object_deps_done" = no; then - case $p in - -L* | -R*) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" - else - _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then - _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}" - else - _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}" - fi - fi - ;; - - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test "$pre_test_object_deps_done" = no; then - if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then - _LT_AC_TAGVAR(predep_objects, $1)="$p" - else - _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p" - fi - else - if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then - _LT_AC_TAGVAR(postdep_objects, $1)="$p" - else - _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling $1 test program" -fi - -$rm -f confest.$objext - -_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)= -if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -fi - -# PORTME: override above test on systems where it is broken -ifelse([$1],[CXX], -[case $host_os in -interix[[3-9]]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - _LT_AC_TAGVAR(predep_objects,$1)= - _LT_AC_TAGVAR(postdep_objects,$1)= - _LT_AC_TAGVAR(postdeps,$1)= - ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - # - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - if test "$solaris_use_stlport4" != yes; then - _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback ;; esac ;; - -solaris*) - case $cc_basename in - CC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" ;; esac ]) -case " $_LT_AC_TAGVAR(postdeps, $1) " in -*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; -esac -])# AC_LIBTOOL_POSTDEP_PREDEP - -# AC_LIBTOOL_LANG_F77_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) -AC_DEFUN([_LT_AC_LANG_F77_CONFIG], -[AC_REQUIRE([AC_PROG_F77]) -AC_LANG_PUSH(Fortran 77) - -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_AC_TAGVAR(allow_undefined_flag, $1)= -_LT_AC_TAGVAR(always_export_symbols, $1)=no -_LT_AC_TAGVAR(archive_expsym_cmds, $1)= -_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_direct, $1)=no -_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= -_LT_AC_TAGVAR(hardcode_minus_L, $1)=no -_LT_AC_TAGVAR(hardcode_automatic, $1)=no -_LT_AC_TAGVAR(module_cmds, $1)= -_LT_AC_TAGVAR(module_expsym_cmds, $1)= -_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_AC_TAGVAR(no_undefined_flag, $1)= -_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= -_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="\ - subroutine t - return - end -" - -# Code to be used in simple link tests -lt_simple_link_test_code="\ - program t - end -" +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER +_LT_DECL([], [sharedlib_from_linklib_cmd], [1], + [Command to associate shared and link libraries]) +])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${F77-"f77"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) - -AC_MSG_CHECKING([if libtool supports shared libraries]) -AC_MSG_RESULT([$can_build_shared]) +# _LT_PATH_MANIFEST_TOOL +# ---------------------- +# locate the manifest tool +m4_defun([_LT_PATH_MANIFEST_TOOL], +[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&AS_MESSAGE_LOG_FD + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest*]) +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi +_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl +])# _LT_PATH_MANIFEST_TOOL -AC_MSG_CHECKING([whether to build shared libraries]) -test "$can_build_shared" = "no" && enable_shared=no -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it ;; -aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac -AC_MSG_RESULT([$enable_shared]) - -AC_MSG_CHECKING([whether to build static libraries]) -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -AC_MSG_RESULT([$enable_static]) - -_LT_AC_TAGVAR(GCC, $1)="$G77" -_LT_AC_TAGVAR(LD, $1)="$LD" - -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_POP -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_F77_CONFIG - - -# AC_LIBTOOL_LANG_GCJ_CONFIG -# -------------------------- -# Ensure that the configuration vars for the C compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) -AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], -[AC_LANG_SAVE - -# Source file extension for Java test sources. -ac_ext=java - -# Object file extension for compiled Java test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${GCJ-"gcj"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds - -AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) -AC_LIBTOOL_PROG_COMPILER_PIC($1) -AC_LIBTOOL_PROG_CC_C_O($1) -AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) -AC_LIBTOOL_PROG_LD_SHLIBS($1) -AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) -AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_RESTORE -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_GCJ_CONFIG - - -# AC_LIBTOOL_LANG_RC_CONFIG -# ------------------------- -# Ensure that the configuration vars for the Windows resource compiler are -# suitably defined. Those variables are subsequently used by -# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. -AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) -AC_DEFUN([_LT_AC_LANG_RC_CONFIG], -[AC_LANG_SAVE - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -_LT_AC_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_AC_SYS_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${RC-"windres"} -compiler=$CC -_LT_AC_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -AC_LIBTOOL_CONFIG($1) - -AC_LANG_RESTORE -CC="$lt_save_CC" -])# AC_LIBTOOL_LANG_RC_CONFIG - - -# AC_LIBTOOL_CONFIG([TAGNAME]) -# ---------------------------- -# If TAGNAME is not passed, then create an initial libtool script -# with a default configuration from the untagged config vars. Otherwise -# add code to config.status for appending the configuration named by -# TAGNAME from the matching tagged config vars. -AC_DEFUN([AC_LIBTOOL_CONFIG], -[# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - _LT_AC_TAGVAR(compiler, $1) \ - _LT_AC_TAGVAR(CC, $1) \ - _LT_AC_TAGVAR(LD, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ - _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ - _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ - _LT_AC_TAGVAR(old_archive_cmds, $1) \ - _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ - _LT_AC_TAGVAR(predep_objects, $1) \ - _LT_AC_TAGVAR(postdep_objects, $1) \ - _LT_AC_TAGVAR(predeps, $1) \ - _LT_AC_TAGVAR(postdeps, $1) \ - _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ - _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \ - _LT_AC_TAGVAR(archive_cmds, $1) \ - _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ - _LT_AC_TAGVAR(postinstall_cmds, $1) \ - _LT_AC_TAGVAR(postuninstall_cmds, $1) \ - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ - _LT_AC_TAGVAR(allow_undefined_flag, $1) \ - _LT_AC_TAGVAR(no_undefined_flag, $1) \ - _LT_AC_TAGVAR(export_symbols_cmds, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ - _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ - _LT_AC_TAGVAR(hardcode_automatic, $1) \ - _LT_AC_TAGVAR(module_cmds, $1) \ - _LT_AC_TAGVAR(module_expsym_cmds, $1) \ - _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ - _LT_AC_TAGVAR(fix_srcfile_path, $1) \ - _LT_AC_TAGVAR(exclude_expsyms, $1) \ - _LT_AC_TAGVAR(include_expsyms, $1); do - - case $var in - _LT_AC_TAGVAR(old_archive_cmds, $1) | \ - _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ - _LT_AC_TAGVAR(archive_cmds, $1) | \ - _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ - _LT_AC_TAGVAR(module_cmds, $1) | \ - _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ - _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\[$]0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` - ;; - esac - -ifelse([$1], [], - [cfgfile="${ofile}T" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - $rm -f "$cfgfile" - AC_MSG_NOTICE([creating $ofile])], - [cfgfile="$ofile"]) - - cat <<__EOF__ >> "$cfgfile" -ifelse([$1], [], -[#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e 1s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG], -[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) - -# Is the compiler the GNU C compiler? -with_gcc=$_LT_AC_TAGVAR(GCC, $1) - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_[]_LT_AC_TAGVAR(LD, $1) +AC_SUBST([LIBM]) +])# LT_LIB_M -# Whether we need hard or soft links. -LN_S=$lt_LN_S +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) -# A BSD-compatible nm program. -NM=$lt_NM -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) - -# Commands used to build and install a shared archive. -archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) -archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) -module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) - -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1) - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to yes if exported symbols are required. -always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) - -# The commands to list exported symbols. -export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) - -# Symbols that must always be exported. -include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) - -ifelse([$1],[], -[# ### END LIBTOOL CONFIG], -[# ### END LIBTOOL TAG CONFIG: $tagname]) - -__EOF__ - -ifelse([$1],[], [ - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -]) -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi -])# AC_LIBTOOL_CONFIG - - -# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], -[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl -_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac - AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], - [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi -])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI -# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE -# --------------------------------- -AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], -[AC_REQUIRE([AC_CANONICAL_HOST]) -AC_REQUIRE([LT_AC_PROG_SED]) -AC_REQUIRE([AC_PROG_NM]) -AC_REQUIRE([AC_OBJEXT]) +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], @@ -4812,33 +3644,18 @@ symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; -cygwin* | mingw* | pw32*) +cygwin* | mingw* | pw32* | cegcc*) symcode='[[ABCDGISTW]]' ;; -hpux*) # Its linker distinguishes data from code symbols +hpux*) if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -linux* | k*bsd*-gnu) - if test "$host_cpu" = ia64; then - symcode='[[ABCDGIRSTW]]' - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' @@ -4863,49 +3680,79 @@ sysv4) ;; esac +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -# Try without a prefix undercore, then with it. +# Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* - cat > conftest.$ac_ext <<EOF + cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; -void nm_test_func(){} +void nm_test_func(void); +void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} -EOF +_LT_EOF if AC_TRY_EVAL(ac_compile); then # Now try to grab the symbols. nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" @@ -4914,53 +3761,67 @@ EOF fi # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat <<EOF > conftest.$ac_ext + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT@&t@_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT@&t@_DLSYM_CONST +#else +# define LT@&t@_DLSYM_CONST const +#endif + #ifdef __cplusplus extern "C" { #endif -EOF +_LT_EOF # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - cat <<EOF >> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif + cat <<_LT_EOF >> conftest.$ac_ext -/* The mapping between symbol names and symbols. */ -const struct { +/* The mapping between symbol names and symbols. */ +LT@&t@_DLSYM_CONST struct { const char *name; - lt_ptr_t address; + void *address; } -lt_preloaded_symbols[[]] = +lt__PROGRAM__LTX_preloaded_symbols[[]] = { -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} }; +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + #ifdef __cplusplus } #endif -EOF +_LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi @@ -4992,56 +3853,91 @@ if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; the else AC_MSG_RESULT(ok) fi -]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then + nm_file_list_spec='@' +fi -# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) -# --------------------------------------- -AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], -[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([], [nm_file_list_spec], [1], + [Specify filename containing input files for $NM]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= -AC_MSG_CHECKING([for $compiler option to produce PIC]) - ifelse([$1],[CXX],[ +m4_if([$1], [CXX], [ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; + amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac ;; + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; - mingw* | cygwin* | os2* | pw32*) + mingw* | cygwin* | os2* | pw32* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. @@ -5049,22 +3945,28 @@ AC_MSG_CHECKING([for $compiler option to produce PIC]) ;; sysv4*MP*) if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. case $host_cpu in - hppa*64*|ia64*) + hppa*64*) ;; *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else @@ -5073,37 +3975,33 @@ AC_MSG_CHECKING([for $compiler option to produce PIC]) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - esac - ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; dgux*) case $cc_basename in ec++*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; @@ -5115,21 +4013,21 @@ AC_MSG_CHECKING([for $compiler option to produce PIC]) hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; @@ -5144,47 +4042,60 @@ AC_MSG_CHECKING([for $compiler option to produce PIC]) irix5* | irix6* | nonstopux*) case $cc_basename in CC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; - linux* | k*bsd*-gnu) + linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; - icpc* | ecpc*) - # Intel C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC* | pgcpp*) - # Portland Group C++ compiler. - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; @@ -5197,7 +4108,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC]) mvs*) case $cc_basename in cxx*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; @@ -5205,22 +4116,27 @@ AC_MSG_CHECKING([for $compiler option to produce PIC]) ;; netbsd*) ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; @@ -5230,15 +4146,15 @@ AC_MSG_CHECKING([for $compiler option to produce PIC]) ;; solaris*) case $cc_basename in - CC*) + CC* | sunCC*) # Sun C++ 4.2, 5.x and Centerline C++ - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; @@ -5248,82 +4164,110 @@ AC_MSG_CHECKING([for $compiler option to produce PIC]) case $cc_basename in CC*) # Sun C++ 4.x - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; vxworks*) ;; *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; - mingw* | cygwin* | pw32* | os2*) + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries m4_if([$1], [GCJ], [], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac ;; interix[[3-9]]*) @@ -5334,65 +4278,57 @@ AC_MSG_CHECKING([for $compiler option to produce PIC]) msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + sysv4*MP*) if test -d /usr/nec; then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; + esac - *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" + fi ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - esac - ;; - mingw* | cygwin* | pw32* | os2*) + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). m4_if([$1], [GCJ], [], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) ;; hpux9* | hpux10* | hpux11*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in @@ -5400,222 +4336,298 @@ AC_MSG_CHECKING([for $compiler option to produce PIC]) # +Z the default ;; *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - newsos6) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; - linux* | k*bsd*-gnu) + linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in - icc* | ecc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + # old Intel for x86_64 which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; - pgcc* | pgf77* | pgf90* | pgf95*) + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; *) - case `$CC -V 2>&1 | sed 5q` in + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ F* | *Sun*Fortran*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; *Sun\ C*) # Sun C 5.9 - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='' + *Intel*\ [[CF]]*Compiler*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + *Portland\ Group*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; esac ;; + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in - f77* | f90* | f95*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) - _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then - AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], - _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1), - [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) - _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" ;; esac +AC_CACHE_CHECK([for $compiler option to produce PIC], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) # # Check to make sure the static flag actually works. # -wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" -AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1), +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], - [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) -]) + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC -# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) -# ------------------------------------ +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- # See if the linker supports building shared libraries. -AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], -[AC_REQUIRE([LT_AC_PROG_SED])dnl +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -ifelse([$1],[CXX],[ - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] case $host_os in aix[[4-9]]*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw*) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - ;; + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + ;; + esac + ;; *) - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; esac - _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] -],[ +], [ runpath_var= - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_AC_TAGVAR(archive_cmds, $1)= - _LT_AC_TAGVAR(archive_expsym_cmds, $1)= - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= - _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= - _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_minus_L, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown - _LT_AC_TAGVAR(hardcode_automatic, $1)=no - _LT_AC_TAGVAR(module_cmds, $1)= - _LT_AC_TAGVAR(module_expsym_cmds, $1)= - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list - _LT_AC_TAGVAR(include_expsyms, $1)= + _LT_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. - _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot @@ -5624,10 +4636,9 @@ ifelse([$1],[CXX],[ # Exclude shared library initialization/finalization symbols. dnl Note also adjust exclude_expsyms for C++ above. extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - _LT_CC_BASENAME([$compiler]) + case $host_os in - cygwin* | mingw* | pw32*) + cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. @@ -5644,8 +4655,34 @@ dnl Note also adjust exclude_expsyms for C++ above. ;; esac - _LT_AC_TAGVAR(ld_shlibs, $1)=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' @@ -5653,16 +4690,17 @@ dnl Note also adjust exclude_expsyms for C++ above. # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no - case `$LD -v 2>/dev/null` in + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... @@ -5675,58 +4713,62 @@ dnl Note also adjust exclude_expsyms for C++ above. aix[[3-9]]*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <<EOF 1>&2 + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 -*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. -EOF +_LT_EOF fi ;; amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - - # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - _LT_AC_TAGVAR(ld_shlibs, $1)=no + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac ;; beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach <jrb3@best.com> says some releases of gcc # support --undefined. This deserves some investigation. FIXME - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_TAGVAR(ld_shlibs, $1)=no fi ;; - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=no - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; @@ -5734,79 +4776,118 @@ EOF fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_TAGVAR(ld_shlibs, $1)=no fi ;; + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + interix[[3-9]]*) - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; - *) - tmp_sharedflag='-shared' ;; esac - _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test $supports_anon_versioning = yes; then - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac else - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - _LT_AC_TAGVAR(ld_shlibs, $1)=no - cat <<EOF 1>&2 + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool @@ -5815,19 +4896,19 @@ EOF *** your PATH or compiler configuration so that the native linker is *** used, and then restart. -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not @@ -5840,54 +4921,58 @@ EOF _LT_EOF ;; *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_TAGVAR(ld_shlibs, $1)=no fi ;; esac - if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then + if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(always_export_symbols, $1)=yes - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + _LT_TAGVAR(hardcode_direct, $1)=unsupported fi ;; @@ -5901,10 +4986,12 @@ _LT_EOF else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else - _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no @@ -5913,10 +5000,10 @@ _LT_EOF # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi done ;; esac @@ -5931,30 +5018,32 @@ _LT_EOF # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - _LT_AC_TAGVAR(archive_cmds, $1)='' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null then - # We have reworked collect2 - : + # We have reworked collect2 + : else - # We have old collect2 - _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac @@ -5965,8 +5054,8 @@ _LT_EOF else # not using gcc if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then @@ -5977,129 +5066,139 @@ _LT_EOF fi fi + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. - _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else if test "$host_cpu" = ia64; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else - # Determine the default libpath from the value encoded in an empty executable. - _LT_AC_SYS_LIBPATH_AIX - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. - _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - # see comment about different semantics on the GNU ld section - _LT_AC_TAGVAR(ld_shlibs, $1)=no + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac ;; bsdi[[45]]*) - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; - cygwin* | mingw* | pw32*) + cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' - _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[[012]]) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_automatic, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - else case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no - ;; + cl*) + # Native MSVC + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; esac - fi ;; - dgux*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) ;; - freebsd1*) - _LT_AC_TAGVAR(ld_shlibs, $1)=no + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor @@ -6107,106 +5206,112 @@ _LT_EOF # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + freebsd2.*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else - _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then + if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) ;; esac fi if test "$with_gnu_ld" = no; then - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi @@ -6214,194 +5319,236 @@ _LT_EOF irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], + [lt_cv_irix_exported_symbol], + [save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE( + [AC_LANG_SOURCE( + [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], + [C++], [[int foo (void) { return 0; }]], + [Fortran 77], [[ + subroutine foo + end]], + [Fortran], [[ + subroutine foo + end]])])], + [lt_cv_irix_exported_symbol=yes], + [lt_cv_irix_exported_symbol=no]) + LDFLAGS="$save_LDFLAGS"]) + if test "$lt_cv_irix_exported_symbol" = yes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) ;; openbsd*) if test -f /usr/libexec/ld.so; then - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac - fi + fi else - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else - _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) - _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else - wlarc='' - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) + # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else - _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes - _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no ;; motorola) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes - _LT_AC_TAGVAR(ld_shlibs, $1)=yes + _LT_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; @@ -6412,50 +5559,65 @@ _LT_EOF # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. - _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_AC_TAGVAR(link_all_deplibs, $1)=yes - _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) - _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) - _LT_AC_TAGVAR(ld_shlibs, $1)=no + _LT_TAGVAR(ld_shlibs, $1)=no ;; esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; + esac + fi fi ]) -AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) -test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) # # Do we need to explicitly link libc? # -case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_AC_TAGVAR(archive_cmds, $1) in + case $_LT_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; @@ -6463,144 +5625,2091 @@ x|xyes) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $rm conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) - _LT_AC_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) - then - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting ${shlibpath_var} if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [postlink_cmds], [2], + [Commands necessary for finishing linking programs]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC="$lt_save_CC" +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else - _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + _LT_TAGVAR(whole_archive_flag_spec, $1)= fi - _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else - cat conftest.err 1>&5 + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi - $rm conftest* - AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach <jrb3@best.com> says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + gnu*) + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; esac - fi + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + + _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_FUNC_STRIPNAME_CNF +# ---------------------- +# func_stripname_cnf prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# +# This function is identical to the (non-XSI) version of func_stripname, +# except this one can be used by m4 code that may be executed by configure, +# rather than the libtool script. +m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl +AC_REQUIRE([_LT_DECL_SED]) +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) +func_stripname_cnf () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname_cnf +])# _LT_FUNC_STRIPNAME_CNF + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF +package foo +func foo() { +} +_LT_EOF +]) + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac + +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)="$p" + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)="$p" + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac ;; esac -])# AC_LIBTOOL_PROG_LD_SHLIBS +]) +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi -# _LT_AC_FILE_LTDLL_C -# ------------------- -# Be careful that the start marker always follows a newline. -AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include <windows.h> -# #undef WIN32_LEAN_AND_MEAN -# #include <stdio.h> -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include <cygwin/cygwin_dll.h> -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ -])# _LT_AC_FILE_LTDLL_C +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_F77" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" -# _LT_AC_TAGVAR(VARNAME, [TAGNAME]) -# --------------------------------- -AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} + CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$G77" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" + CFLAGS="$lt_save_CFLAGS" +fi # test "$_lt_disable_F77" != yes +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test "$_lt_disable_FC" != yes + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE -# old names -AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) -AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) -AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +CFLAGS=$GCJFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_GO_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Go compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GO_CONFIG], +[AC_REQUIRE([LT_PROG_GO])dnl +AC_LANG_SAVE + +# Source file extension for Go test sources. +ac_ext=go + +# Object file extension for compiled Go test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="package main; func main() { }" + +# Code to be used in simple link tests +lt_simple_link_test_code='package main; func main() { }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GOC-"gccgo"} +CFLAGS=$GOFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# Go did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GO_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_RC_CONFIG -# This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL]) -AC_DEFUN([LT_AC_PROG_GCJ], -[AC_CHECK_TOOL(GCJ, gcj, no) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS) +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_GO +# ---------- +AC_DEFUN([LT_PROG_GO], +[AC_CHECK_TOOL(GOC, gccgo,) ]) -AC_DEFUN([LT_AC_PROG_RC], -[AC_CHECK_TOOL(RC, windres, no) + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) ]) +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + -# Cheap backport of AS_EXECUTABLE_P and required macros -# from Autoconf 2.59; we should not use $as_executable_p directly. +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) -# _AS_TEST_PREPARE + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + +# _LT_DECL_DLLTOOL # ---------------- -m4_ifndef([_AS_TEST_PREPARE], -[m4_defun([_AS_TEST_PREPARE], -[if test -x / >/dev/null 2>&1; then - as_executable_p='test -x' -else - as_executable_p='test -f' -fi -])])# _AS_TEST_PREPARE +# Ensure DLLTOOL variable is set. +m4_defun([_LT_DECL_DLLTOOL], +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) +AC_SUBST([DLLTOOL]) +]) -# AS_EXECUTABLE_P -# --------------- -# Check whether a file is executable. -m4_ifndef([AS_EXECUTABLE_P], -[m4_defun([AS_EXECUTABLE_P], -[AS_REQUIRE([_AS_TEST_PREPARE])dnl -$as_executable_p $1[]dnl -])])# AS_EXECUTABLE_P +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED +m4_ifndef([AC_PROG_SED], [ # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # -# LT_AC_PROG_SED -# -------------- -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -AC_DEFUN([LT_AC_PROG_SED], + +m4_defun([AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. @@ -6612,7 +7721,7 @@ do test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do - if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done @@ -6653,24 +7762,868 @@ done SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +AC_MSG_RESULT([$xsi_shell]) +_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +AC_MSG_CHECKING([whether the shell understands "+="]) +lt_shell_append=no +( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +AC_MSG_RESULT([$lt_shell_append]) +_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) +# ------------------------------------------------------ +# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and +# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. +m4_defun([_LT_PROG_FUNCTION_REPLACE], +[dnl { +sed -e '/^$1 ()$/,/^} # $1 /c\ +$1 ()\ +{\ +m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) +} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: +]) + + +# _LT_PROG_REPLACE_SHELLFNS +# ------------------------- +# Replace existing portable implementations of several shell functions with +# equivalent extended shell implementations where those features are available.. +m4_defun([_LT_PROG_REPLACE_SHELLFNS], +[if test x"$xsi_shell" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl + func_split_long_opt_name=${1%%=*} + func_split_long_opt_arg=${1#*=}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) + + _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) + + _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) + + _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) +fi + +if test x"$lt_shell_append" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) + + _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl + func_quote_for_eval "${2}" +dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ + eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) +fi +]) + +# _LT_PATH_CONVERSION_FUNCTIONS +# ----------------------------- +# Determine which file name conversion functions should be used by +# func_to_host_file (and, implicitly, by func_to_host_path). These are needed +# for certain cross-compile configurations and native mingw. +m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_MSG_CHECKING([how to convert $build file names to $host format]) +AC_CACHE_VAL(lt_cv_to_host_file_cmd, +[case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +]) +to_host_file_cmd=$lt_cv_to_host_file_cmd +AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) +_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], + [0], [convert $build file names to $host format])dnl + +AC_MSG_CHECKING([how to convert $build file names to toolchain format]) +AC_CACHE_VAL(lt_cv_to_tool_file_cmd, +[#assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac +]) +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) +_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], + [0], [convert $build files to toolchain format])dnl +])# _LT_PATH_CONVERSION_FUNCTIONS + +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 7 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option `$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + ]) +])# _LT_SET_OPTIONS + + + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [pic_mode=default]) + +test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) + +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl ]) -# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# @configure_input@ + +# serial 3337 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.4.2]) +m4_define([LT_PACKAGE_REVISION], [1.3337]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.4.2' +macro_revision='1.3337' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) + +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) + +# Copyright (C) 2002-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. +# serial 8 + # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.10' +[am__api_version='1.12' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.10.1], [], +m4_if([$1], [1.12.2], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -6684,24 +8637,26 @@ m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.10.1])dnl +[AM_AUTOMAKE_VERSION([1.12.2])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. +# serial 2 + # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and @@ -6720,7 +8675,7 @@ _AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you +# harmless because $srcdir is '.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, @@ -6746,26 +8701,26 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. +# Copyright (C) 1997-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 8 +# serial 10 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl if $2; then $1_TRUE= $1_FALSE='#' @@ -6779,16 +8734,15 @@ AC_CONFIG_COMMANDS_PRE( Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. +# Copyright (C) 1999-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 9 +# serial 17 -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing @@ -6798,7 +8752,7 @@ fi])]) # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was @@ -6811,12 +8765,13 @@ AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], UPC, [depcc="$UPC" am_compiler_list=], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], @@ -6824,8 +8779,9 @@ AC_CACHE_CHECK([dependency style of $depcc], # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. @@ -6843,6 +8799,16 @@ AC_CACHE_CHECK([dependency style of $depcc], if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -6854,35 +8820,49 @@ AC_CACHE_CHECK([dependency style of $depcc], : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -6915,7 +8895,7 @@ AM_CONDITIONAL([am__fastdep$1], [ # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl @@ -6925,71 +8905,86 @@ AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' + am__nodep='_no' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1999-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -#serial 3 +# serial 6 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" +[{ + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done done -done +} ])# _AM_OUTPUT_DEPENDENCY_COMMANDS @@ -6998,7 +8993,7 @@ done # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will +# is enabled. FIXME. This creates each '.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], @@ -7008,14 +9003,13 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008 Free Software Foundation, Inc. +# Copyright (C) 1996-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 13 +# serial 19 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. @@ -7032,7 +9026,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.60])dnl +[AC_PREREQ([2.62])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl @@ -7061,55 +9055,85 @@ AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl +[AC_DIAGNOSE([obsolete], +[$0: two- and three-arguments forms are deprecated. For more info, see: +http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -AC_REQUIRE([AM_PROG_MKDIR_P])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html> +# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html> +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +dnl Support for Objective C++ was only introduced in Autoconf 2.65, +dnl but we still cater to Autoconf 2.62. +m4_ifdef([AC_PROG_OBJCXX], +[AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])])dnl ]) +_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl +dnl The 'parallel-tests' driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro +dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl ]) +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header @@ -7132,21 +9156,30 @@ for _am_header in $config_headers :; do done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. +# serial 8 + # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2003-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -7170,27 +9203,38 @@ AC_SUBST([am__leading_dot])]) # Add --enable-maintainer-mode option to configure. -*- Autoconf -*- # From Jim Meyering -# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1996-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 +# serial 7 +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless 'enable' is passed literally. +# For symmetry, 'disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. AC_DEFUN([AM_MAINTAINER_MODE], -[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode is disabled by default - AC_ARG_ENABLE(maintainer-mode, -[ --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer], - USE_MAINTAINER_MODE=$enableval, - USE_MAINTAINER_MODE=no) +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], + [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], + am_maintainer_other[ make rules and dependencies not useful + (and sometimes confusing) to the casual installer])], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST(MAINT)dnl + AC_SUBST([MAINT])dnl ] ) @@ -7198,13 +9242,13 @@ AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 +# serial 5 # AM_MAKE_INCLUDE() # ----------------- @@ -7213,7 +9257,7 @@ AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: - @echo done + @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. @@ -7223,24 +9267,24 @@ am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac fi AC_SUBST([am__include]) AC_SUBST([am__quote]) @@ -7250,14 +9294,13 @@ rm -f confinc confmf # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1997-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 5 +# serial 7 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ @@ -7274,51 +9317,32 @@ AC_SUBST($1)]) AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) + AC_MSG_WARN(['missing' script is too old or missing]) fi ]) -# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_MKDIR_P -# --------------- -# Check for `mkdir -p'. -AC_DEFUN([AM_PROG_MKDIR_P], -[AC_PREREQ([2.60])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -dnl while keeping a definition of mkdir_p for backward compatibility. -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -dnl Makefile.ins that do not define MKDIR_P, so we do our own -dnl adjustment using top_builddir (which is defined more often than -dnl MKDIR_P). -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -case $mkdir_p in - [[\\/$]]* | ?:[[\\/]]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac -]) - # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 3 +# serial 6 # _AM_MANGLE_OPTION(NAME) # ----------------------- @@ -7326,16 +9350,16 @@ AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) -# ------------------------------ +# -------------------- # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) # _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- +# ------------------------ # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- @@ -7345,45 +9369,62 @@ AC_DEFUN([_AM_IF_OPTION], # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1996-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 4 +# serial 9 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done test "$[2]" = conftest.file ) then @@ -7393,62 +9434,87 @@ else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi -AC_MSG_RESULT(yes)]) +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# Copyright (C) 2001-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. +# serial 2 + # AM_PROG_INSTALL_STRIP # --------------------- -# One issue with vendor `install' (even GNU) is that you can't +# One issue with vendor 'install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize +# always use install-sh in "make install-strip", and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right # tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006 Free Software Foundation, Inc. +# Copyright (C) 2006-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. +# serial 3 + # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# Copyright (C) 2004-2012 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. -# serial 2 +# serial 3 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory @@ -7459,10 +9525,11 @@ AC_DEFUN([_AM_SUBST_NOTMAKE]) # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) @@ -7470,7 +9537,7 @@ AC_MSG_CHECKING([how to create a $1 tar archive]) _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. +# Solaris sh will not grok spaces in the rhs of '-'. for _am_tool in $_am_tools do case $_am_tool in diff --git a/autogen.sh b/autogen.sh index c24e8e868063..41fbc31d7246 100644 --- a/autogen.sh +++ b/autogen.sh @@ -1,6 +1,6 @@ #!/bin/sh # -# $P4: //depot/projects/trustedbsd/openbsm/autogen.sh#1 $ +# $P4: //depot/projects/trustedbsd/openbsm/autogen.sh#2 $ # libtoolize --copy --force diff --git a/bin/Makefile.am b/bin/Makefile.am index 735c241baf3a..16073e982ff1 100644 --- a/bin/Makefile.am +++ b/bin/Makefile.am @@ -1,8 +1,9 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/Makefile.am#3 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/bin/Makefile.am#4 $ +## SUBDIRS = \ + auditdistd \ auditfilterd \ auditreduce \ praudit diff --git a/bin/Makefile.in b/bin/Makefile.in index 4bb342a230f4..e2b375404916 100644 --- a/bin/Makefile.in +++ b/bin/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,14 +13,28 @@ # PARTICULAR PURPOSE. @SET_MAKE@ - -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/Makefile.in#11 $ -# VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -48,6 +62,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ @@ -57,12 +72,46 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir ETAGS = etags CTAGS = ctags -DIST_SUBDIRS = auditfilterd auditreduce praudit audit auditd +DIST_SUBDIRS = auditdistd auditfilterd auditreduce praudit audit \ + auditd DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ @@ -75,45 +124,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -122,13 +178,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -174,7 +232,7 @@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -SUBDIRS = auditfilterd auditreduce praudit $(am__append_1) +SUBDIRS = auditdistd auditfilterd auditreduce praudit $(am__append_1) all: all-recursive .SUFFIXES: @@ -182,14 +240,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign bin/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign bin/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -207,6 +265,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo @@ -215,13 +274,13 @@ clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -230,7 +289,11 @@ $(RECURSIVE_TARGETS): done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -238,50 +301,23 @@ $(RECURSIVE_TARGETS): else \ local_target="$$target"; \ fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done +cscopelist-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) @@ -289,14 +325,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ @@ -308,7 +344,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ @@ -317,29 +353,48 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -360,29 +415,41 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ + am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ @@ -402,16 +469,22 @@ install-am: all-am installcheck: installcheck-recursive install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -430,6 +503,8 @@ dvi-am: html: html-recursive +html-am: + info: info-recursive info-am: @@ -438,18 +513,28 @@ install-data-am: install-dvi: install-dvi-recursive +install-dvi-am: + install-exec-am: install-html: install-html-recursive +install-html-am: + install-info: install-info-recursive +install-info-am: + install-man: install-pdf: install-pdf-recursive +install-pdf-am: + install-ps: install-ps-recursive +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-recursive @@ -470,22 +555,24 @@ ps-am: uninstall-am: -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \ + cscopelist-recursive ctags-recursive install-am install-strip \ + tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am + cscopelist cscopelist-recursive ctags ctags-recursive \ + distclean distclean-generic distclean-libtool distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-recursive uninstall uninstall-am + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff --git a/bin/audit/Makefile.am b/bin/audit/Makefile.am index 1b5d554ac62b..e7977831fddb 100644 --- a/bin/audit/Makefile.am +++ b/bin/audit/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/audit/Makefile.am#6 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/bin/audit/Makefile.am#7 $ +## if USE_NATIVE_INCLUDES INCLUDES = -I$(top_builddir) -I$(top_srcdir) diff --git a/bin/audit/Makefile.in b/bin/audit/Makefile.in index c374cba9c735..b7b8361f3093 100644 --- a/bin/audit/Makefile.in +++ b/bin/audit/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/audit/Makefile.in#12 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -38,7 +52,8 @@ build_triplet = @build@ host_triplet = @host@ sbin_PROGRAMS = audit$(EXEEXT) subdir = bin/audit -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -46,8 +61,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)" -sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(sbin_PROGRAMS) am__audit_SOURCES_DIST = audit.c auditd_controlUser.c @USE_MACH_IPC_FALSE@am_audit_OBJECTS = audit.$(OBJEXT) @@ -58,6 +73,7 @@ audit_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ @@ -69,6 +85,38 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(audit_SOURCES) DIST_SOURCES = $(am__audit_SOURCES_DIST) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } man8dir = $(mandir)/man8 NROFF = nroff MANS = $(man8_MANS) @@ -87,45 +135,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -134,13 +189,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -201,14 +258,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/audit/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign bin/audit/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/audit/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign bin/audit/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -226,35 +283,54 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \ - else :; fi; \ - done + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ + } \ + ; done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \ - rm -f "$(DESTDIR)$(sbindir)/$$f"; \ - done + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(sbindir)" && rm -f $$files clean-sbinPROGRAMS: - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -audit$(EXEEXT): $(audit_OBJECTS) $(audit_DEPENDENCIES) + @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +audit$(EXEEXT): $(audit_OBJECTS) $(audit_DEPENDENCIES) $(EXTRA_audit_DEPENDENCIES) @rm -f audit$(EXEEXT) $(LINK) $(audit_OBJECTS) $(audit_LDADD) $(LIBS) @@ -269,21 +345,21 @@ distclean-compile: .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< @@ -293,65 +369,61 @@ mostlyclean-libtool: clean-libtool: -rm -rf .libs _libs -install-man8: $(man8_MANS) $(man_MANS) +install-man8: $(man8_MANS) @$(NORMAL_INSTALL) - test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)" - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ + @list1='$(man8_MANS)'; \ + list2=''; \ + test -n "$(man8dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.8[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \ + done; } + uninstall-man8: @$(NORMAL_UNINSTALL) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man8dir)/$$inst"; \ - done + @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir) ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -359,34 +431,66 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically 'make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -402,13 +506,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -429,10 +537,15 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: @@ -440,6 +553,7 @@ clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -461,6 +575,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -469,18 +585,28 @@ install-data-am: install-man install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-sbinPROGRAMS install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-man8 install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -508,7 +634,7 @@ uninstall-man: uninstall-man8 .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-sbinPROGRAMS ctags distclean \ + clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ @@ -525,6 +651,7 @@ uninstall-man: uninstall-man8 @USE_MACH_IPC_TRUE@auditd_controlUser.c auditd_control.h: $(top_srcdir)/bin/auditd/auditd_control.defs @USE_MACH_IPC_TRUE@ $(MIG) -user auditd_controlUser.c -header auditd_control.h -server /dev/null -sheader /dev/null $(top_srcdir)/bin/auditd/auditd_control.defs + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/bin/audit/audit.8 b/bin/audit/audit.8 index ff3c52d08dbc..d5b296068dc2 100644 --- a/bin/audit/audit.8 +++ b/bin/audit/audit.8 @@ -25,7 +25,7 @@ .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/bin/audit/audit.8#15 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/bin/audit/audit.8#16 $ .\" .Dd January 29, 2009 .Dt AUDIT 8 @@ -46,18 +46,18 @@ One of the following flags is required as an argument to .It Fl e Forces the audit system to immediately remove audit log files that meet the expiration criteria specified in the audit control file without -doing a log rotation. +doing a log rotation. .It Fl i Initializes and starts auditing. This option is currently for Mac OS X only and requires .Xr auditd 8 -to be configured to run under +to be configured to run under .Xr launchd 8 . .It Fl n Forces the audit system to close the existing audit log file and rotate to a new log file in a location specified in the audit control file. -Also, audit log files that meet the expiration criteria specified in the +Also, audit log files that meet the expiration criteria specified in the audit control file will be removed. .It Fl s Specifies that the audit system should [re]synchronize its @@ -77,7 +77,7 @@ on-demand by .Xr launchd 8 (Mac OS X only). The -.Nm +.Nm utility requires audit administrator privileges for successful operation. .Sh FILES .Bl -tag -width ".Pa /etc/security/audit_control" -compact diff --git a/bin/auditd/Makefile.am b/bin/auditd/Makefile.am index 2372fa6e7fd1..2a187db63f6f 100644 --- a/bin/auditd/Makefile.am +++ b/bin/auditd/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/Makefile.am#5 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/Makefile.am#6 $ +## if USE_NATIVE_INCLUDES INCLUDES = -I$(top_builddir) -I$(top_srcdir) diff --git a/bin/auditd/Makefile.in b/bin/auditd/Makefile.in index 4b2a6cb5f220..3fa44f12e7dc 100644 --- a/bin/auditd/Makefile.in +++ b/bin/auditd/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/Makefile.in#11 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -38,7 +52,8 @@ build_triplet = @build@ host_triplet = @host@ sbin_PROGRAMS = auditd$(EXEEXT) subdir = bin/auditd -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -46,8 +61,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)" -sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(sbin_PROGRAMS) am__auditd_SOURCES_DIST = audit_warn.c auditd.c auditd_fbsd.c \ auditd_controlServer.c audit_triggersServer.c auditd_darwin.c @@ -63,6 +78,7 @@ auditd_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la \ DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ @@ -74,6 +90,38 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(auditd_SOURCES) DIST_SOURCES = $(am__auditd_SOURCES_DIST) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } man8dir = $(mandir)/man8 NROFF = nroff MANS = $(man8_MANS) @@ -92,45 +140,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -139,13 +194,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -206,14 +263,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditd/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign bin/auditd/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditd/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign bin/auditd/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -231,35 +288,54 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \ - else :; fi; \ - done + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ + } \ + ; done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \ - rm -f "$(DESTDIR)$(sbindir)/$$f"; \ - done + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(sbindir)" && rm -f $$files clean-sbinPROGRAMS: - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -auditd$(EXEEXT): $(auditd_OBJECTS) $(auditd_DEPENDENCIES) + @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +auditd$(EXEEXT): $(auditd_OBJECTS) $(auditd_DEPENDENCIES) $(EXTRA_auditd_DEPENDENCIES) @rm -f auditd$(EXEEXT) $(LINK) $(auditd_OBJECTS) $(auditd_LDADD) $(LIBS) @@ -278,21 +354,21 @@ distclean-compile: .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< @@ -302,65 +378,61 @@ mostlyclean-libtool: clean-libtool: -rm -rf .libs _libs -install-man8: $(man8_MANS) $(man_MANS) +install-man8: $(man8_MANS) @$(NORMAL_INSTALL) - test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)" - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ + @list1='$(man8_MANS)'; \ + list2=''; \ + test -n "$(man8dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.8[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \ + done; } + uninstall-man8: @$(NORMAL_UNINSTALL) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man8dir)/$$inst"; \ - done + @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir) ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -368,34 +440,66 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically 'make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -411,13 +515,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -438,10 +546,15 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: @@ -449,6 +562,7 @@ clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -470,6 +584,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -478,18 +594,28 @@ install-data-am: install-man install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-sbinPROGRAMS install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-man8 install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -517,7 +643,7 @@ uninstall-man: uninstall-man8 .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-sbinPROGRAMS ctags distclean \ + clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ @@ -537,6 +663,7 @@ uninstall-man: uninstall-man8 @USE_MACH_IPC_TRUE@audit_triggersServer.c audit_triggersServer.h: audit_triggers.defs @USE_MACH_IPC_TRUE@ $(MIG) -user /dev/null -header /dev/null -server audit_triggersServer.c -sheader audit_triggersServer.h $(top_srcdir)/bin/auditd/audit_triggers.defs + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/bin/auditd/auditd.8 b/bin/auditd/auditd.8 index d680edd00042..1fcebd7f6cc8 100644 --- a/bin/auditd/auditd.8 +++ b/bin/auditd/auditd.8 @@ -25,7 +25,7 @@ .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/auditd.8#17 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/auditd.8#18 $ .\" .Dd December 11, 2008 .Dt AUDITD 8 @@ -59,7 +59,7 @@ is configured to start on-demand using .Pp Optionally, the audit review group "audit" may be created. Non-privileged -users that are members of this group may read the audit trail log files. +users that are members of this group may read the audit trail log files. .Sh NOTE To assure uninterrupted audit support, the .Nm @@ -72,33 +72,33 @@ the .Pa audit_control file. .Pp -If +If .Nm is started on-demand by -.Xr launchd 8 +.Xr launchd 8 then auditing should only be started and stopped with .Xr audit 8 . .Pp -On Mac OS X, +On Mac OS X, .Nm -uses the +uses the .Xr asl 3 API for writing system log messages. -Therefore, only the audit administrator +Therefore, only the audit administrator and members of the audit review group will be able to read the -system log entries. +system log entries. .Sh FILES .Bl -tag -width ".Pa /etc/security" -compact .It Pa /var/audit Default directory for storing audit log files. .Pp .It Pa /etc/security -The directory containing the auditing configuration files +The directory containing the auditing configuration files .Xr audit_class 5 , .Xr audit_control 5 , .Xr audit_event 5 , and -.Xr audit_warn 5 . +.Xr audit_warn 5 . .El .Sh COMPATIBILITY The historical diff --git a/bin/auditd/auditd.c b/bin/auditd/auditd.c index 233f82186f7e..26a0d07c3cd7 100644 --- a/bin/auditd/auditd.c +++ b/bin/auditd/auditd.c @@ -26,7 +26,7 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/auditd.c#46 $ + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditd/auditd.c#50 $ */ #include <sys/types.h> @@ -36,9 +36,9 @@ #include <sys/dirent.h> #ifdef HAVE_FULL_QUEUE_H #include <sys/queue.h> -#else /* !HAVE_FULL_QUEUE_H */ +#else /* !HAVE_FULL_QUEUE_H */ #include <compat/queue.h> -#endif /* !HAVE_FULL_QUEUE_H */ +#endif /* !HAVE_FULL_QUEUE_H */ #include <sys/mman.h> #include <sys/param.h> #include <sys/stat.h> @@ -79,21 +79,21 @@ /* - * LaunchD flag (Mac OS X and, maybe, FreeBSD only.) See launchd(8) and + * LaunchD flag (Mac OS X and, maybe, FreeBSD only.) See launchd(8) and * http://wiki.freebsd.org/launchd for more information. * - * In order for auditd to work "on demand" with launchd(8) it can't: - * call daemon(3) - * call fork and having the parent process exit - * change uids or gids. - * set up the current working directory or chroot. - * set the session id - * change stdio to /dev/null. - * call setrusage(2) - * call setpriority(2) - * Ignore SIGTERM. - * auditd (in 'launchd mode') is launched on demand so it must catch - * SIGTERM to exit cleanly. + * In order for auditd to work "on demand" with launchd(8) it can't: + * call daemon(3) + * call fork and having the parent process exit + * change uids or gids. + * set up the current working directory or chroot. + * set the session id + * change stdio to /dev/null. + * call setrusage(2) + * call setpriority(2) + * Ignore SIGTERM. + * auditd (in 'launchd mode') is launched on demand so it must catch + * SIGTERM to exit cleanly. */ static int launchd_flag = 0; @@ -133,7 +133,7 @@ get_curfile(void) if (cf == NULL) { auditd_log_err("malloc failed: %m"); return (NULL); - } + } len = readlink(AUDIT_CURRENT_LINK, cf, MAXPATHLEN - 1); if (len < 0) { @@ -142,7 +142,7 @@ get_curfile(void) } /* readlink() doesn't terminate string. */ - cf[len] = '\0'; + cf[len] = '\0'; return (cf); } @@ -155,38 +155,35 @@ close_lastfile(char *TS) { char *ptr; char *oldname; - size_t len; /* If lastfile is NULL try to get it from the 'current' link. */ if (lastfile == NULL) lastfile = get_curfile(); - + if (lastfile != NULL) { - len = strlen(lastfile) + 1; - oldname = (char *)malloc(len); + oldname = strdup(lastfile); if (oldname == NULL) return (-1); - strlcpy(oldname, lastfile, len); /* Rename the last file -- append timestamp. */ if ((ptr = strstr(lastfile, NOT_TERMINATED)) != NULL) { memcpy(ptr, TS, POSTFIX_LEN); - if (rename(oldname, lastfile) != 0) + if (auditd_rename(oldname, lastfile) != 0) auditd_log_err( "Could not rename %s to %s: %m", oldname, lastfile); else { - /* + /* * Remove the 'current' symlink since the link - * is now invalid. + * is now invalid. */ (void) unlink(AUDIT_CURRENT_LINK); - auditd_log_notice( "renamed %s to %s", + auditd_log_notice("renamed %s to %s", oldname, lastfile); audit_warn_closefile(lastfile); } - } else - auditd_log_err( "Could not rename %s to %s", oldname, + } else + auditd_log_err("Could not rename %s to %s", oldname, lastfile); free(lastfile); free(oldname); @@ -202,16 +199,39 @@ static int swap_audit_file(void) { int err; - char *newfile; - char TS[TIMESTAMP_LEN]; + char *newfile, *name; + char TS[TIMESTAMP_LEN + 1]; time_t tt; - if (getTSstr(tt, TS, TIMESTAMP_LEN) != 0) + if (getTSstr(tt, TS, sizeof(TS)) != 0) return (-1); + /* + * If prefix and suffix are the same, it means that records are + * being produced too fast. We don't want to rename now, because + * next trail file can get the same name and once that one is + * terminated also within one second it will overwrite the current + * one. Just keep writing to the same trail and wait for the next + * trigger from the kernel. + * FREEBSD KERNEL WAS UPDATED TO KEEP SENDING TRIGGERS, WHICH MIGHT + * NOT BE THE CASE FOR OTHER OSES. + * If the kernel will not keep sending triggers, trail file will not + * be terminated. + */ + if (lastfile == NULL) { + name = NULL; + } else { + name = strrchr(lastfile, '/'); + if (name != NULL) + name++; + } + if (name != NULL && strncmp(name, TS, TIMESTAMP_LEN) == 0) { + auditd_log_debug("Not ready to terminate trail file yet."); + return (0); + } err = auditd_swap_trail(TS, &newfile, audit_review_gid, audit_warn_getacdir); if (err != ADE_NOERR) { - auditd_log_err( "%s: %m", auditd_strerror(err)); + auditd_log_err("%s: %m", auditd_strerror(err)); if (err != ADE_ACTL) return (-1); } @@ -229,13 +249,13 @@ swap_audit_file(void) * enabled) so updated the cached state as well. */ auditd_set_state(AUD_STATE_ENABLED); - + /* * Create 'current' symlink. Recover from crash, if needed. */ if (auditd_new_curlink(newfile) != 0) - auditd_log_err("auditd_new_curlink(\"%s\") failed: %s: %m", - newfile, auditd_strerror(err)); + auditd_log_err("auditd_new_curlink(\"%s\") failed: %s: %m", + newfile, auditd_strerror(err)); lastfile = newfile; auditd_log_notice("New audit file is %s", newfile); @@ -298,6 +318,14 @@ audit_setup(void) { int err; + /* Configure trail files distribution. */ + err = auditd_set_dist(); + if (err) { + auditd_log_err("auditd_set_dist() %s: %m", + auditd_strerror(err)); + } else + auditd_log_debug("Configured trail files distribution."); + if (do_trail_file() == -1) { auditd_log_err("Error creating audit trail file"); fail_exit(); @@ -306,19 +334,18 @@ audit_setup(void) /* Generate an audit record. */ err = auditd_gen_record(AUE_audit_startup, NULL); if (err) - auditd_log_err("auditd_gen_record(AUE_audit_startup) %s: %m", + auditd_log_err("auditd_gen_record(AUE_audit_startup) %s: %m", auditd_strerror(err)); - + if (auditd_config_controls() == 0) auditd_log_info("Audit controls init successful"); else auditd_log_err("Audit controls init failed"); - } /* - * Close auditd pid file and trigger mechanism. + * Close auditd pid file and trigger mechanism. */ static int close_misc(void) @@ -345,14 +372,14 @@ static int close_all(void) { int err_ret = 0; - char TS[TIMESTAMP_LEN]; + char TS[TIMESTAMP_LEN + 1]; int err; int cond; time_t tt; err = auditd_gen_record(AUE_audit_shutdown, NULL); if (err) - auditd_log_err("auditd_gen_record(AUE_audit_shutdown) %s: %m", + auditd_log_err("auditd_gen_record(AUE_audit_shutdown) %s: %m", auditd_strerror(err)); /* Flush contents. */ @@ -368,7 +395,7 @@ close_all(void) */ auditd_set_state(AUD_STATE_DISABLED); - if (getTSstr(tt, TS, TIMESTAMP_LEN) == 0) + if (getTSstr(tt, TS, sizeof(TS)) == 0) close_lastfile(TS); if (lastfile != NULL) free(lastfile); @@ -513,7 +540,7 @@ auditd_handle_trigger(int trigger) /* * Message processing is done here. - */ + */ switch(trigger) { case AUDIT_TRIGGER_LOW_SPACE: auditd_log_notice("Got low space trigger"); @@ -554,7 +581,7 @@ auditd_handle_trigger(int trigger) * send SIGTERM. */ if (!launchd_flag) { - auditd_log_info("auditd exiting."); + auditd_log_info("auditd exiting."); exit (err); } break; @@ -570,7 +597,7 @@ auditd_handle_trigger(int trigger) err = auditd_expire_trails(audit_warn_expired); if (err) auditd_log_err("auditd_expire_trails(): %s", - auditd_strerror(err)); + auditd_strerror(err)); break; default: @@ -609,7 +636,7 @@ auditd_terminate(void) int ret; auditd_reap_children(); - + if (launchd_flag) ret = close_misc(); else @@ -630,7 +657,7 @@ auditd_config_controls(void) /* * Configure event to class mappings in kernel. - */ + */ cnt = auditd_set_evcmap(); if (cnt < 0) { auditd_log_err("auditd_set_evcmap() failed: %m"); @@ -646,7 +673,7 @@ auditd_config_controls(void) */ err = auditd_set_namask(); if (err) { - auditd_log_err("auditd_set_namask() %s: %m", + auditd_log_err("auditd_set_namask() %s: %m", auditd_strerror(err)); ret = -1; } else @@ -657,12 +684,12 @@ auditd_config_controls(void) */ err = auditd_set_policy(); if (err) { - auditd_log_err("auditd_set_policy() %s: %m", + auditd_log_err("auditd_set_policy() %s: %m", auditd_strerror(err)); ret = -1; } else auditd_log_debug("Set audit policy in kernel."); - + /* * Configure audit trail log size in kernel. */ @@ -673,9 +700,9 @@ auditd_config_controls(void) ret = -1; } else auditd_log_debug("Set audit trail size in kernel."); - + /* - * Configure audit trail volume minimum free percentage of blocks in + * Configure audit trail volume minimum free percentage of blocks in * kernel. */ err = auditd_set_minfree(); @@ -684,11 +711,11 @@ auditd_config_controls(void) auditd_strerror(err)); ret = -1; } else - auditd_log_debug( + auditd_log_debug( "Set audit trail min free percent in kernel."); /* - * Configure host address in the audit kernel information. + * Configure host address in the audit kernel information. */ err = auditd_set_host(); if (err) { @@ -730,7 +757,7 @@ setup(void) */ err = auditd_prevent_audit(); if (err) { - auditd_log_err("auditd_prevent_audit() %s: %m", + auditd_log_err("auditd_prevent_audit() %s: %m", auditd_strerror(err)); fail_exit(); } @@ -785,7 +812,7 @@ main(int argc, char **argv) * likely the wheel group. Is there a better way to deal with this? */ grp = getgrnam(AUDIT_REVIEW_GROUP); - if (grp != NULL) + if (grp != NULL) audit_review_gid = grp->gr_gid; #endif @@ -815,7 +842,7 @@ main(int argc, char **argv) setup(); /* - * auditd_wait_for_events() shouldn't return unless something is wrong. + * auditd_wait_for_events() shouldn't return unless something is wrong. */ auditd_wait_for_events(); diff --git a/bin/auditdistd/Makefile.am b/bin/auditdistd/Makefile.am new file mode 100644 index 000000000000..88f2584d7b30 --- /dev/null +++ b/bin/auditdistd/Makefile.am @@ -0,0 +1,33 @@ +## +## $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/Makefile.am#1 $ +## + +if USE_NATIVE_INCLUDES +INCLUDES = -I$(top_builddir) -I$(top_srcdir) +else +INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys +endif + +sbin_PROGRAMS = auditdistd +man5_MANS = auditdistd.conf.5 +man8_MANS = auditdistd.8 +CFLAGS = -Wno-format +YFLAGS = -d +auditdistd_LDFLAGS = -lcrypto + +auditdistd_SOURCES = \ + auditdistd.c \ + parse.y \ + pjdlog.c \ + proto.c \ + proto_common.c \ + proto_socketpair.c \ + proto_tcp.c \ + proto_tls.c \ + proto_uds.c \ + receiver.c \ + sandbox.c \ + sender.c \ + subr.c \ + token.l \ + trail.c diff --git a/bin/auditdistd/Makefile.in b/bin/auditdistd/Makefile.in new file mode 100644 index 000000000000..b6228fdf7c6b --- /dev/null +++ b/bin/auditdistd/Makefile.in @@ -0,0 +1,753 @@ +# Makefile.in generated by automake 1.12.2 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +sbin_PROGRAMS = auditdistd$(EXEEXT) +subdir = bin/auditdistd +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp $(top_srcdir)/config/ylwrap \ + parse.c parse.h token.c +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man5dir)" \ + "$(DESTDIR)$(man8dir)" +PROGRAMS = $(sbin_PROGRAMS) +am_auditdistd_OBJECTS = auditdistd.$(OBJEXT) parse.$(OBJEXT) \ + pjdlog.$(OBJEXT) proto.$(OBJEXT) proto_common.$(OBJEXT) \ + proto_socketpair.$(OBJEXT) proto_tcp.$(OBJEXT) \ + proto_tls.$(OBJEXT) proto_uds.$(OBJEXT) receiver.$(OBJEXT) \ + sandbox.$(OBJEXT) sender.$(OBJEXT) subr.$(OBJEXT) \ + token.$(OBJEXT) trail.$(OBJEXT) +auditdistd_OBJECTS = $(am_auditdistd_OBJECTS) +auditdistd_LDADD = $(LDADD) +auditdistd_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(auditdistd_LDFLAGS) $(LDFLAGS) -o $@ +DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config +depcomp = $(SHELL) $(top_srcdir)/config/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ +@MAINTAINER_MODE_FALSE@am__skiplex = test -f $@ || +LEXCOMPILE = $(LEX) $(AM_LFLAGS) $(LFLAGS) +LTLEXCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(LEX) $(AM_LFLAGS) $(LFLAGS) +YLWRAP = $(top_srcdir)/config/ylwrap +@MAINTAINER_MODE_FALSE@am__skipyacc = test -f $@ || +am__yacc_c2h = sed -e s/cc$$/hh/ -e s/cpp$$/hpp/ -e s/cxx$$/hxx/ \ + -e s/c++$$/h++/ -e s/c$$/h/ +YACCCOMPILE = $(YACC) $(AM_YFLAGS) $(YFLAGS) +LTYACCCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(YACC) $(AM_YFLAGS) $(YFLAGS) +SOURCES = $(auditdistd_SOURCES) +DIST_SOURCES = $(auditdistd_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +man5dir = $(mandir)/man5 +man8dir = $(mandir)/man8 +NROFF = nroff +MANS = $(man5_MANS) $(man8_MANS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = -Wno-format +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MIG = @MIG@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = -d +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +@USE_NATIVE_INCLUDES_FALSE@INCLUDES = -I$(top_builddir) -I$(top_srcdir) -I$(top_srcdir)/sys +@USE_NATIVE_INCLUDES_TRUE@INCLUDES = -I$(top_builddir) -I$(top_srcdir) +man5_MANS = auditdistd.conf.5 +man8_MANS = auditdistd.8 +auditdistd_LDFLAGS = -lcrypto +auditdistd_SOURCES = \ + auditdistd.c \ + parse.y \ + pjdlog.c \ + proto.c \ + proto_common.c \ + proto_socketpair.c \ + proto_tcp.c \ + proto_tls.c \ + proto_uds.c \ + receiver.c \ + sandbox.c \ + sender.c \ + subr.c \ + token.l \ + trail.c + +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .l .lo .o .obj .y +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditdistd/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign bin/auditdistd/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): +install-sbinPROGRAMS: $(sbin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-sbinPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(sbindir)" && rm -f $$files + +clean-sbinPROGRAMS: + @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +parse.h: parse.c + @if test ! -f $@; then rm -f parse.c; else :; fi + @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) parse.c; else :; fi +auditdistd$(EXEEXT): $(auditdistd_OBJECTS) $(auditdistd_DEPENDENCIES) $(EXTRA_auditdistd_DEPENDENCIES) + @rm -f auditdistd$(EXEEXT) + $(auditdistd_LINK) $(auditdistd_OBJECTS) $(auditdistd_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/auditdistd.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pjdlog.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proto.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proto_common.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proto_socketpair.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proto_tcp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proto_tls.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proto_uds.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/receiver.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sandbox.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sender.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/subr.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/token.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trail.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +.l.c: + $(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE) + +.y.c: + $(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h `echo $@ | $(am__yacc_c2h)` y.output $*.output -- $(YACCCOMPILE) + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-man5: $(man5_MANS) + @$(NORMAL_INSTALL) + @list1='$(man5_MANS)'; \ + list2=''; \ + test -n "$(man5dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.5[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \ + done; } + +uninstall-man5: + @$(NORMAL_UNINSTALL) + @list='$(man5_MANS)'; test -n "$(man5dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir) +install-man8: $(man8_MANS) + @$(NORMAL_INSTALL) + @list1='$(man8_MANS)'; \ + list2=''; \ + test -n "$(man8dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.8[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \ + done; } + +uninstall-man8: + @$(NORMAL_UNINSTALL) + @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir) + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + set x; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically 'make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) $(MANS) +installdirs: + for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -rm -f parse.c + -rm -f parse.h + -rm -f token.c +clean: clean-am + +clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \ + mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-man + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-sbinPROGRAMS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man5 install-man8 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-man uninstall-sbinPROGRAMS + +uninstall-man: uninstall-man5 uninstall-man8 + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-man5 install-man8 install-pdf install-pdf-am \ + install-ps install-ps-am install-sbinPROGRAMS install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-man uninstall-man5 \ + uninstall-man8 uninstall-sbinPROGRAMS + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/bin/auditdistd/auditdistd.8 b/bin/auditdistd/auditdistd.8 new file mode 100644 index 000000000000..299cde46237f --- /dev/null +++ b/bin/auditdistd/auditdistd.8 @@ -0,0 +1,106 @@ +.\" Copyright (c) 2012 The FreeBSD Foundation +.\" All rights reserved. +.\" +.\" This documentation was written by Pawel Jakub Dawidek under sponsorship +.\" from the FreeBSD Foundation. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd March 5, 2012 +.Dt AUDITDISTD 8 +.Os +.Sh NAME +.Nm auditdistd +.Nd "Audit trail files distribution daemon" +.Sh SYNOPSIS +.Nm +.Op Fl dFhl +.Op Fl c Ar config +.Op Fl P Ar pidfile +.Sh DESCRIPTION +The +.Nm +daemon is responsible for distributing audit trail files over TCP/IP network in +a secure and reliable way. +.Pp +The +.Nm +daemon can be started with the following command line arguments: +.Bl -tag -width ".Fl P Ar pidfile" +.It Fl c Ar config +Specify alternative location of the configuration file. +The default location is +.Pa /etc/security/auditdistd.conf . +Note: the configuration file may contain passwords. +Care should be taken to configure proper permissions on this file +.Li ( eg. 0600 ) . +.It Fl d +Print or log debugging information. +This option can be specified multiple times to raise the verbosity +level. +.It Fl F +Start the +.Nm +daemon in the foreground. +By default +.Nm +starts in the background. +.It Fl h +Print the +.Nm +usage message. +.It Fl l +Start in a launchd-friendly mode, ie. do not use +.Xr daemon 3 . +.It Fl P Ar pidfile +Specify alternative location of a file where main process PID will be +stored. +The default location is +.Pa /var/run/auditdistd.pid . +.El +.Sh FILES +.Bl -tag -width ".Pa /etc/security/auditdistd.conf" -compact +.It Pa /etc/security/auditdistd.conf +The configuration file for +.Nm . +.It Pa /var/run/auditdistd.pid +The default location of the +.Nm +PID file. +.El +.Sh EXIT STATUS +Exit status is 0 on success, or one of the values described in +.Xr sysexits 3 +on failure. +.Sh SEE ALSO +.Xr sysexits 3 , +.Xr audit 4 , +.Xr auditdistd.conf 5 , +.Xr auditd 8 +.Sh AUTHORS +The +.Nm +was developed by +.An Pawel Jakub Dawidek Aq pawel@dawidek.net +under sponsorship of the FreeBSD Foundation. diff --git a/bin/auditdistd/auditdistd.c b/bin/auditdistd/auditdistd.c new file mode 100644 index 000000000000..2cab2760205b --- /dev/null +++ b/bin/auditdistd/auditdistd.c @@ -0,0 +1,801 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/auditdistd.c#1 $ + */ + +#include "config.h" + +#include <sys/param.h> +#if defined(HAVE_SYS_ENDIAN_H) && defined(HAVE_BSWAP) +#include <sys/endian.h> +#else /* !HAVE_SYS_ENDIAN_H || !HAVE_BSWAP */ +#ifdef HAVE_MACHINE_ENDIAN_H +#include <machine/endian.h> +#else /* !HAVE_MACHINE_ENDIAN_H */ +#ifdef HAVE_ENDIAN_H +#include <endian.h> +#else /* !HAVE_ENDIAN_H */ +#error "No supported endian.h" +#endif /* !HAVE_ENDIAN_H */ +#endif /* !HAVE_MACHINE_ENDIAN_H */ +#include <compat/endian.h> +#endif /* !HAVE_SYS_ENDIAN_H || !HAVE_BSWAP */ +#include <sys/queue.h> +#include <sys/wait.h> + +#include <ctype.h> +#include <err.h> +#include <errno.h> +#include <fcntl.h> +#ifdef HAVE_LIBUTIL_H +#include <libutil.h> +#endif +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <strings.h> +#include <unistd.h> + +#include <openssl/hmac.h> + +#ifndef HAVE_PIDFILE_OPEN +#include <compat/pidfile.h> +#endif +#ifndef HAVE_STRLCPY +#include <compat/strlcpy.h> +#endif +#ifndef HAVE_SIGTIMEDWAIT +#include "sigtimedwait.h" +#endif + +#include <pjdlog.h> + +#include "auditdistd.h" +#include "proto.h" +#include "subr.h" +#include "synch.h" + +/* Path to configuration file. */ +const char *cfgpath = ADIST_CONFIG; +/* Auditdistd configuration. */ +static struct adist_config *adcfg; +/* Was SIGINT or SIGTERM signal received? */ +bool sigexit_received = false; +/* PID file handle. */ +struct pidfh *pfh; + +/* How often check for hooks running for too long. */ +#define SIGNALS_CHECK_INTERVAL 5 + +static void +usage(void) +{ + + errx(EX_USAGE, "[-dFhl] [-c config] [-P pidfile]"); +} + +void +descriptors_cleanup(struct adist_host *adhost) +{ + struct adist_host *adh; + struct adist_listen *lst; + + TAILQ_FOREACH(adh, &adcfg->adc_hosts, adh_next) { + if (adh == adhost) + continue; + if (adh->adh_remote != NULL) { + proto_close(adh->adh_remote); + adh->adh_remote = NULL; + } + } + TAILQ_FOREACH(lst, &adcfg->adc_listen, adl_next) { + if (lst->adl_conn != NULL) + proto_close(lst->adl_conn); + } + (void)pidfile_close(pfh); + pjdlog_fini(); +} + +static void +child_cleanup(struct adist_host *adhost) +{ + + if (adhost->adh_conn != NULL) { + PJDLOG_ASSERT(adhost->adh_role == ADIST_ROLE_SENDER); + proto_close(adhost->adh_conn); + adhost->adh_conn = NULL; + } + adhost->adh_worker_pid = 0; +} + +static void +child_exit_log(const char *type, unsigned int pid, int status) +{ + + if (WIFEXITED(status) && WEXITSTATUS(status) == 0) { + pjdlog_debug(1, "%s process exited gracefully (pid=%u).", + type, pid); + } else if (WIFSIGNALED(status)) { + pjdlog_error("%s process killed (pid=%u, signal=%d).", + type, pid, WTERMSIG(status)); + } else { + pjdlog_error("%s process exited ungracefully (pid=%u, exitcode=%d).", + type, pid, WIFEXITED(status) ? WEXITSTATUS(status) : -1); + } +} + +static void +child_exit(void) +{ + struct adist_host *adhost; + bool restart; + int status; + pid_t pid; + + restart = false; + while ((pid = wait3(&status, WNOHANG, NULL)) > 0) { + /* Find host related to the process that just exited. */ + TAILQ_FOREACH(adhost, &adcfg->adc_hosts, adh_next) { + if (pid == adhost->adh_worker_pid) + break; + } + if (adhost == NULL) { + child_exit_log("Sandbox", pid, status); + } else { + if (adhost->adh_role == ADIST_ROLE_SENDER) + restart = true; + pjdlog_prefix_set("[%s] (%s) ", adhost->adh_name, + role2str(adhost->adh_role)); + child_exit_log("Worker", pid, status); + child_cleanup(adhost); + pjdlog_prefix_set("%s", ""); + } + } + if (!restart) + return; + /* We have some sender processes to restart. */ + sleep(1); + TAILQ_FOREACH(adhost, &adcfg->adc_hosts, adh_next) { + if (adhost->adh_role != ADIST_ROLE_SENDER) + continue; + if (adhost->adh_worker_pid != 0) + continue; + pjdlog_prefix_set("[%s] (%s) ", adhost->adh_name, + role2str(adhost->adh_role)); + pjdlog_info("Restarting sender process."); + adist_sender(adcfg, adhost); + pjdlog_prefix_set("%s", ""); + } +} + +/* TODO */ +static void +adist_reload(void) +{ + + pjdlog_info("Reloading configuration is not yet implemented."); +} + +static void +terminate_workers(void) +{ + struct adist_host *adhost; + + pjdlog_info("Termination signal received, exiting."); + TAILQ_FOREACH(adhost, &adcfg->adc_hosts, adh_next) { + if (adhost->adh_worker_pid == 0) + continue; + pjdlog_info("Terminating worker process (adhost=%s, role=%s, pid=%u).", + adhost->adh_name, role2str(adhost->adh_role), + adhost->adh_worker_pid); + if (kill(adhost->adh_worker_pid, SIGTERM) == 0) + continue; + pjdlog_errno(LOG_WARNING, + "Unable to send signal to worker process (adhost=%s, role=%s, pid=%u).", + adhost->adh_name, role2str(adhost->adh_role), + adhost->adh_worker_pid); + } +} + +static void +listen_accept(struct adist_listen *lst) +{ + unsigned char rnd[32], hash[32], resp[32]; + struct adist_host *adhost; + struct proto_conn *conn; + char adname[ADIST_HOSTSIZE]; + char laddr[256], raddr[256]; + char welcome[8]; + int status, version; + pid_t pid; + + proto_local_address(lst->adl_conn, laddr, sizeof(laddr)); + pjdlog_debug(1, "Accepting connection to %s.", laddr); + + if (proto_accept(lst->adl_conn, &conn) == -1) { + pjdlog_errno(LOG_ERR, "Unable to accept connection to %s", + laddr); + return; + } + + proto_local_address(conn, laddr, sizeof(laddr)); + proto_remote_address(conn, raddr, sizeof(raddr)); + pjdlog_info("Connection from %s to %s.", raddr, laddr); + + /* Error in setting timeout is not critical, but why should it fail? */ + if (proto_timeout(conn, ADIST_TIMEOUT) < 0) + pjdlog_errno(LOG_WARNING, "Unable to set connection timeout"); + + /* + * Before receiving any data see if remote host is known. + */ + TAILQ_FOREACH(adhost, &adcfg->adc_hosts, adh_next) { + if (adhost->adh_role != ADIST_ROLE_RECEIVER) + continue; + if (!proto_address_match(conn, adhost->adh_remoteaddr)) + continue; + break; + } + if (adhost == NULL) { + pjdlog_error("Client %s is not known.", raddr); + goto close; + } + /* Ok, remote host is known. */ + + /* Exchange welcome message, which include version number. */ + bzero(welcome, sizeof(welcome)); + if (proto_recv(conn, welcome, sizeof(welcome)) == -1) { + pjdlog_errno(LOG_WARNING, + "Unable to receive welcome message from %s", + adhost->adh_remoteaddr); + goto close; + } + if (strncmp(welcome, "ADIST", 5) != 0 || !isdigit(welcome[5]) || + !isdigit(welcome[6]) || welcome[7] != '\0') { + pjdlog_warning("Invalid welcome message from %s.", + adhost->adh_remoteaddr); + goto close; + } + + version = MIN(ADIST_VERSION, atoi(welcome + 5)); + + (void)snprintf(welcome, sizeof(welcome), "ADIST%02d", version); + if (proto_send(conn, welcome, sizeof(welcome)) == -1) { + pjdlog_errno(LOG_WARNING, + "Unable to send welcome message to %s", + adhost->adh_remoteaddr); + goto close; + } + + if (proto_recv(conn, adname, sizeof(adhost->adh_name)) < 0) { + pjdlog_errno(LOG_ERR, "Unable to receive hostname from %s", + raddr); + goto close; + } + + /* Find host now that we have hostname. */ + TAILQ_FOREACH(adhost, &adcfg->adc_hosts, adh_next) { + if (adhost->adh_role != ADIST_ROLE_RECEIVER) + continue; + if (!proto_address_match(conn, adhost->adh_remoteaddr)) + continue; + if (strcmp(adhost->adh_name, adname) != 0) + continue; + break; + } + if (adhost == NULL) { + pjdlog_error("No configuration for host %s from address %s.", + adname, raddr); + goto close; + } + + adhost->adh_version = version; + pjdlog_debug(1, "Version %d negotiated with %s.", adhost->adh_version, + adhost->adh_remoteaddr); + + /* Now that we know host name setup log prefix. */ + pjdlog_prefix_set("[%s] (%s) ", adhost->adh_name, + role2str(adhost->adh_role)); + + if (adist_random(rnd, sizeof(rnd)) == -1) { + pjdlog_error("Unable to generate challenge."); + goto close; + } + pjdlog_debug(1, "Challenge generated."); + + if (proto_send(conn, rnd, sizeof(rnd)) == -1) { + pjdlog_errno(LOG_ERR, "Unable to send challenge to %s", + adhost->adh_remoteaddr); + goto close; + } + pjdlog_debug(1, "Challenge sent."); + + if (proto_recv(conn, resp, sizeof(resp)) == -1) { + pjdlog_errno(LOG_ERR, "Unable to receive response from %s", + adhost->adh_remoteaddr); + goto close; + } + pjdlog_debug(1, "Response received."); + + if (HMAC(EVP_sha256(), adhost->adh_password, + (int)strlen(adhost->adh_password), rnd, (int)sizeof(rnd), hash, + NULL) == NULL) { + pjdlog_error("Unable to generate hash."); + goto close; + } + pjdlog_debug(1, "Hash generated."); + + if (memcmp(resp, hash, sizeof(hash)) != 0) { + pjdlog_error("Invalid response from %s (wrong password?).", + adhost->adh_remoteaddr); + goto close; + } + pjdlog_info("Sender authenticated."); + + if (proto_recv(conn, rnd, sizeof(rnd)) == -1) { + pjdlog_errno(LOG_ERR, "Unable to receive challenge from %s", + adhost->adh_remoteaddr); + goto close; + } + pjdlog_debug(1, "Challenge received."); + + if (HMAC(EVP_sha256(), adhost->adh_password, + (int)strlen(adhost->adh_password), rnd, (int)sizeof(rnd), hash, + NULL) == NULL) { + pjdlog_error("Unable to generate response."); + goto close; + } + pjdlog_debug(1, "Response generated."); + + if (proto_send(conn, hash, sizeof(hash)) == -1) { + pjdlog_errno(LOG_ERR, "Unable to send response to %s", + adhost->adh_remoteaddr); + goto close; + } + pjdlog_debug(1, "Response sent."); + + if (adhost->adh_worker_pid != 0) { + pjdlog_debug(1, + "Receiver process exists (pid=%u), stopping it.", + (unsigned int)adhost->adh_worker_pid); + /* Stop child process. */ + if (kill(adhost->adh_worker_pid, SIGINT) == -1) { + pjdlog_errno(LOG_ERR, + "Unable to stop worker process (pid=%u)", + (unsigned int)adhost->adh_worker_pid); + /* + * Other than logging the problem we + * ignore it - nothing smart to do. + */ + } + /* Wait for it to exit. */ + else if ((pid = waitpid(adhost->adh_worker_pid, + &status, 0)) != adhost->adh_worker_pid) { + /* We can only log the problem. */ + pjdlog_errno(LOG_ERR, + "Waiting for worker process (pid=%u) failed", + (unsigned int)adhost->adh_worker_pid); + } else { + child_exit_log("Worker", adhost->adh_worker_pid, + status); + } + child_cleanup(adhost); + } + + adhost->adh_remote = conn; + adist_receiver(adcfg, adhost); + + pjdlog_prefix_set("%s", ""); + return; +close: + proto_close(conn); + pjdlog_prefix_set("%s", ""); +} + +static void +connection_migrate(struct adist_host *adhost) +{ + struct proto_conn *conn; + int16_t val = 0; + + pjdlog_prefix_set("[%s] (%s) ", adhost->adh_name, + role2str(adhost->adh_role)); + + PJDLOG_ASSERT(adhost->adh_role == ADIST_ROLE_SENDER); + + if (proto_recv(adhost->adh_conn, &val, sizeof(val)) < 0) { + pjdlog_errno(LOG_WARNING, + "Unable to receive connection command"); + return; + } + if (proto_set("tls:fingerprint", adhost->adh_fingerprint) == -1) { + val = errno; + pjdlog_errno(LOG_WARNING, "Unable to set fingerprint"); + goto out; + } + if (proto_connect(adhost->adh_localaddr[0] != '\0' ? + adhost->adh_localaddr : NULL, + adhost->adh_remoteaddr, -1, &conn) < 0) { + val = errno; + pjdlog_errno(LOG_WARNING, "Unable to connect to %s", + adhost->adh_remoteaddr); + goto out; + } + val = 0; +out: + if (proto_send(adhost->adh_conn, &val, sizeof(val)) < 0) { + pjdlog_errno(LOG_WARNING, + "Unable to send reply to connection request"); + } + if (val == 0 && proto_connection_send(adhost->adh_conn, conn) < 0) + pjdlog_errno(LOG_WARNING, "Unable to send connection"); + + pjdlog_prefix_set("%s", ""); +} + +static void +check_signals(void) +{ + struct timespec sigtimeout; + sigset_t mask; + int signo; + + sigtimeout.tv_sec = 0; + sigtimeout.tv_nsec = 0; + + PJDLOG_VERIFY(sigemptyset(&mask) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGHUP) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGINT) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGTERM) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGCHLD) == 0); + + while ((signo = sigtimedwait(&mask, NULL, &sigtimeout)) != -1) { + switch (signo) { + case SIGINT: + case SIGTERM: + sigexit_received = true; + terminate_workers(); + exit(EX_OK); + break; + case SIGCHLD: + child_exit(); + break; + case SIGHUP: + adist_reload(); + break; + default: + PJDLOG_ABORT("Unexpected signal (%d).", signo); + } + } +} + +static void +main_loop(void) +{ + struct adist_host *adhost; + struct adist_listen *lst; + struct timeval seltimeout; + int fd, maxfd, ret; + fd_set rfds; + + seltimeout.tv_sec = SIGNALS_CHECK_INTERVAL; + seltimeout.tv_usec = 0; + + pjdlog_info("Started successfully."); + + for (;;) { + check_signals(); + + /* Setup descriptors for select(2). */ + FD_ZERO(&rfds); + maxfd = -1; + TAILQ_FOREACH(lst, &adcfg->adc_listen, adl_next) { + if (lst->adl_conn == NULL) + continue; + fd = proto_descriptor(lst->adl_conn); + PJDLOG_ASSERT(fd >= 0); + FD_SET(fd, &rfds); + maxfd = fd > maxfd ? fd : maxfd; + } + TAILQ_FOREACH(adhost, &adcfg->adc_hosts, adh_next) { + if (adhost->adh_role == ADIST_ROLE_SENDER) { + /* Only sender workers asks for connections. */ + PJDLOG_ASSERT(adhost->adh_conn != NULL); + fd = proto_descriptor(adhost->adh_conn); + PJDLOG_ASSERT(fd >= 0); + FD_SET(fd, &rfds); + maxfd = fd > maxfd ? fd : maxfd; + } else { + PJDLOG_ASSERT(adhost->adh_conn == NULL); + } + } + + PJDLOG_ASSERT(maxfd + 1 <= (int)FD_SETSIZE); + ret = select(maxfd + 1, &rfds, NULL, NULL, &seltimeout); + if (ret == 0) { + /* + * select(2) timed out, so there should be no + * descriptors to check. + */ + continue; + } else if (ret == -1) { + if (errno == EINTR) + continue; + KEEP_ERRNO((void)pidfile_remove(pfh)); + pjdlog_exit(EX_OSERR, "select() failed"); + } + PJDLOG_ASSERT(ret > 0); + + /* + * Check for signals before we do anything to update our + * info about terminated workers in the meantime. + */ + check_signals(); + + TAILQ_FOREACH(lst, &adcfg->adc_listen, adl_next) { + if (lst->adl_conn == NULL) + continue; + if (FD_ISSET(proto_descriptor(lst->adl_conn), &rfds)) + listen_accept(lst); + } + TAILQ_FOREACH(adhost, &adcfg->adc_hosts, adh_next) { + if (adhost->adh_role == ADIST_ROLE_SENDER) { + PJDLOG_ASSERT(adhost->adh_conn != NULL); + if (FD_ISSET(proto_descriptor(adhost->adh_conn), + &rfds)) { + connection_migrate(adhost); + } + } else { + PJDLOG_ASSERT(adhost->adh_conn == NULL); + } + } + } +} + +static void +adist_config_dump(struct adist_config *cfg) +{ + struct adist_host *adhost; + struct adist_listen *lst; + + pjdlog_debug(2, "Configuration:"); + pjdlog_debug(2, " Global:"); + pjdlog_debug(2, " pidfile: %s", cfg->adc_pidfile); + pjdlog_debug(2, " timeout: %d", cfg->adc_timeout); + if (TAILQ_EMPTY(&cfg->adc_listen)) { + pjdlog_debug(2, " Sender only, not listening."); + } else { + pjdlog_debug(2, " Listening on:"); + TAILQ_FOREACH(lst, &cfg->adc_listen, adl_next) { + pjdlog_debug(2, " listen: %s", lst->adl_addr); + pjdlog_debug(2, " conn: %p", lst->adl_conn); + } + } + pjdlog_debug(2, " Hosts:"); + TAILQ_FOREACH(adhost, &cfg->adc_hosts, adh_next) { + pjdlog_debug(2, " name: %s", adhost->adh_name); + pjdlog_debug(2, " role: %s", role2str(adhost->adh_role)); + pjdlog_debug(2, " version: %d", adhost->adh_version); + pjdlog_debug(2, " localaddr: %s", adhost->adh_localaddr); + pjdlog_debug(2, " remoteaddr: %s", adhost->adh_remoteaddr); + pjdlog_debug(2, " remote: %p", adhost->adh_remote); + pjdlog_debug(2, " directory: %s", adhost->adh_directory); + pjdlog_debug(2, " compression: %d", adhost->adh_compression); + pjdlog_debug(2, " checksum: %d", adhost->adh_checksum); + pjdlog_debug(2, " pid: %ld", (long)adhost->adh_worker_pid); + pjdlog_debug(2, " conn: %p", adhost->adh_conn); + } +} + +static void +dummy_sighandler(int sig __unused) +{ + /* Nothing to do. */ +} + +int +main(int argc, char *argv[]) +{ + struct adist_host *adhost; + struct adist_listen *lst; + const char *execpath, *pidfile; + bool foreground, launchd; + pid_t otherpid; + int debuglevel; + sigset_t mask; + + execpath = argv[0]; + if (execpath[0] != '/') { + errx(EX_USAGE, + "auditdistd requires execution with an absolute path."); + } + + /* + * We are executed from proto to create sandbox. + */ + if (argc > 1 && strcmp(argv[1], "proto") == 0) { + argc -= 2; + argv += 2; + if (proto_exec(argc, argv) == -1) + err(EX_USAGE, "Unable to execute proto"); + } + + foreground = false; + debuglevel = 0; + launchd = false; + pidfile = NULL; + + for (;;) { + int ch; + + ch = getopt(argc, argv, "c:dFhlP:"); + if (ch == -1) + break; + switch (ch) { + case 'c': + cfgpath = optarg; + break; + case 'd': + debuglevel++; + break; + case 'F': + foreground = true; + break; + case 'l': + launchd = true; + break; + case 'P': + pidfile = optarg; + break; + case 'h': + default: + usage(); + } + } + argc -= optind; + argv += optind; + + pjdlog_init(PJDLOG_MODE_STD); + pjdlog_debug_set(debuglevel); + + if (proto_set("execpath", execpath) == -1) + pjdlog_exit(EX_TEMPFAIL, "Unable to set executable name"); + if (proto_set("user", ADIST_USER) == -1) + pjdlog_exit(EX_TEMPFAIL, "Unable to set proto user"); + if (proto_set("tcp:port", ADIST_TCP_PORT) == -1) + pjdlog_exit(EX_TEMPFAIL, "Unable to set default TCP port"); + + /* + * When path to the configuration file is relative, obtain full path, + * so we can always find the file, even after daemonizing and changing + * working directory to /. + */ + if (cfgpath[0] != '/') { + const char *newcfgpath; + + newcfgpath = realpath(cfgpath, NULL); + if (newcfgpath == NULL) { + pjdlog_exit(EX_CONFIG, + "Unable to obtain full path of %s", cfgpath); + } + cfgpath = newcfgpath; + } + + adcfg = yy_config_parse(cfgpath, true); + PJDLOG_ASSERT(adcfg != NULL); + adist_config_dump(adcfg); + + if (proto_set("tls:certfile", adcfg->adc_certfile) == -1) + pjdlog_exit(EX_TEMPFAIL, "Unable to set certfile path"); + if (proto_set("tls:keyfile", adcfg->adc_keyfile) == -1) + pjdlog_exit(EX_TEMPFAIL, "Unable to set keyfile path"); + + if (pidfile != NULL) { + if (strlcpy(adcfg->adc_pidfile, pidfile, + sizeof(adcfg->adc_pidfile)) >= + sizeof(adcfg->adc_pidfile)) { + pjdlog_exitx(EX_CONFIG, "Pidfile path is too long."); + } + } + if (foreground && pidfile == NULL) { + pfh = NULL; + } else { + pfh = pidfile_open(adcfg->adc_pidfile, 0600, &otherpid); + if (pfh == NULL) { + if (errno == EEXIST) { + pjdlog_exitx(EX_TEMPFAIL, + "Another auditdistd is already running, pid: %jd.", + (intmax_t)otherpid); + } + /* + * If we cannot create pidfile from other reasons, + * only warn. + */ + pjdlog_errno(LOG_WARNING, + "Unable to open or create pidfile %s", + adcfg->adc_pidfile); + } + } + + /* + * Restore default actions for interesting signals in case parent + * process (like init(8)) decided to ignore some of them (like SIGHUP). + */ + PJDLOG_VERIFY(signal(SIGHUP, SIG_DFL) != SIG_ERR); + PJDLOG_VERIFY(signal(SIGINT, SIG_DFL) != SIG_ERR); + PJDLOG_VERIFY(signal(SIGTERM, SIG_DFL) != SIG_ERR); + /* + * Because SIGCHLD is ignored by default, setup dummy handler for it, + * so we can mask it. + */ + PJDLOG_VERIFY(signal(SIGCHLD, dummy_sighandler) != SIG_ERR); + + PJDLOG_VERIFY(sigemptyset(&mask) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGHUP) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGINT) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGTERM) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGCHLD) == 0); + PJDLOG_VERIFY(sigprocmask(SIG_SETMASK, &mask, NULL) == 0); + + /* Listen for remote connections. */ + TAILQ_FOREACH(lst, &adcfg->adc_listen, adl_next) { + if (proto_server(lst->adl_addr, &lst->adl_conn) == -1) { + KEEP_ERRNO((void)pidfile_remove(pfh)); + pjdlog_exit(EX_OSERR, "Unable to listen on address %s", + lst->adl_addr); + } + } + + if (!foreground) { + if (!launchd && daemon(0, 0) == -1) { + KEEP_ERRNO((void)pidfile_remove(pfh)); + pjdlog_exit(EX_OSERR, "Unable to daemonize"); + } + + /* Start logging to syslog. */ + pjdlog_mode_set(PJDLOG_MODE_SYSLOG); + } + if (pfh != NULL) { + /* Write PID to a file. */ + if (pidfile_write(pfh) < 0) { + pjdlog_errno(LOG_WARNING, + "Unable to write PID to a file"); + } + } + + TAILQ_FOREACH(adhost, &adcfg->adc_hosts, adh_next) { + if (adhost->adh_role == ADIST_ROLE_SENDER) + adist_sender(adcfg, adhost); + } + + main_loop(); + + exit(0); +} diff --git a/bin/auditdistd/auditdistd.conf.5 b/bin/auditdistd/auditdistd.conf.5 new file mode 100644 index 000000000000..46356df00a5f --- /dev/null +++ b/bin/auditdistd/auditdistd.conf.5 @@ -0,0 +1,361 @@ +.\" Copyright (c) 2012 The FreeBSD Foundation +.\" All rights reserved. +.\" +.\" This documentation was written by Pawel Jakub Dawidek under sponsorship +.\" from the FreeBSD Foundation. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY +.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF +.\" SUCH DAMAGE. +.\" +.\" $FreeBSD$ +.\" +.Dd March 22, 2011 +.Dt AUDITDISTD.CONF 5 +.Os +.Sh NAME +.Nm auditdistd.conf +.Nd configuration file for the +.Xr auditdistd 8 +daemon. +.Sh DESCRIPTION +Note: the configuration file may contain passwords. +Care should be taken to configure proper permissions on this file +.Li ( eg. 0600 ) . +.Pp +Every line starting with # is treated as comment and ignored. +.Sh CONFIGURATION FILE SYNTAX +General syntax of the +.Nm +file is following: +.Bd -literal -offset +## Global section. + +# Our name. +# The default is first part of the hostname. +name "<name>" + +# Connection timeout. +# The default is 5. +timeout <seconds> + +# Path to pidfile. +# The default is "/var/run/auditdistd.pid". +pidfile "<path>" + +sender { + ## Sender section. + + # Source address for connections. + # Optional. + source "<addr>" + + # Directory with audit trail files managed by auditdistd. + # The default is /var/audit/dist. + directory "<dir>" +.\" +.\" # Checksum algorithm for data send over the wire. +.\" # The default is none. +.\" checksum "<algorithm>" +.\" +.\" # Compression algorithm for data send over the wire. +.\" # The default is none. +.\" compression "<algorithm>" + + # Configuration for the target system we want to send audit trail + # files to. + host "<name>" { + # Source address for connections. + # Optional. + source "<addr>" + + # Address of auditdistd receiver. + # No default. Obligatory. + remote "<addr>" + + # Directory with audit trail files managed by auditdistd. + # The default is /var/audit/dist. + directory "<dir>" + + # Fingerprint of the receiver's public key when using TLS + # for connection. + # Example fingerprint: + # SHA256=8F:0A:FC:8A:3D:09:80:AF:D9:AA:38:CC:8A:86:53:E6:8F:B6:1C:55:30:14:D7:F9:AA:8B:3E:73:CD:F5:76:2B + fingerprint "<algorithm=hash>" + + # Password used to authenticate in front of the receiver. + password "<password>" +.\" +.\" # Checksum algorithm for data send over the wire. +.\" # The default is none. +.\" checksum "<algorithm>" +.\" +.\" # Compression algorithm for data send over the wire. +.\" # The default is none. +.\" compression "<algorithm>" + } + + # Currently local audit trail files can be send only to one remote + # auditdistd receiver, but this can change in the future. +} + +receiver { + ## Receiver section. + + # Address to listen on. Multiple listen addresses might be specified. + # The defaults are "tcp4://0.0.0.0:7878" and "tcp6://[::]:7878". + listen "<addr>" + + # Base directory. + # If directory in host section is no absolute, it will be concatenated + # with this base directory. + # The default is "/var/audit/remote". + directory "<basedir>" + + # Path to receiver's certificate file. + # The default is "/etc/security/auditdistd.cert.pem". + certfile "<path>" + + # Path to receiver's private key file. + # The default is "/etc/security/auditdistd.key.pem". + keyfile "<path>" + + # Configuration for a source system we want to receive audit trail + # files from. + host "<name>" { + # Sender address. + # No default. Obligatory. + remote "<addr>" + + # Directory where to store audit trail files received + # from system <name>. + # The default is "<basedir>/<name>". + directory "<dir>" + + # Password used by the sender to authenticate. + password "<password>" + } + + # Multiple hosts to receive from can be configured. +} +.Ed +.Pp +Most of the various available configuration parameters are optional. +If parameter is not defined in the particular section, it will be +inherited from the parent section if possible. +For example, if the +.Ic source +parameter is not defined in the +.Ic host +section, it will be inherited from the +.Ic sender +section. +In case the +.Ic global +section does not define the +.Ic source +parameter at all, the default value will be used. +.Sh CONFIGURATION FILE DESCRIPTION +The following statements are available: +.Bl -tag -width ".Ic xxxx" +.It Ic name Aq name +.Pp +This host's name. +It is send to the receiver, so it can properly recognize us if there are +more than one sender coming from the same IP address. +.It Ic timeout Aq seconds +.Pp +Connection timeout in seconds. +The default value is +.Va 5 . +.It Ic pidfile Aq path +.Pp +File in which to store the process ID of the main +.Xr auditdistd 8 +process. +.Pp +The default value is +.Pa /var/run/auditdistd.pid . +.It Ic source Aq addr +.Pp +Local address to bind to before connecting to the remote +.Nm auditdistd +daemon. +Format is the same as for the +.Ic listen +statement. +.It Ic directory Aq path +.Pp +Directory where to look for audit trail files in case of sender mode or +directory where to store received audit trail files. +The provided path has to be an absolute path. +The only exception is when directory is provided in the +.Ic receiver +section, then path provided in the +.Ic host +subsections can be relative to the directory in the +.Ic receiver +section. +The default value is +.Pa /var/audit/dist +for the entire +.Ic sender +section, +.Pa /var/audit/remote +for the non-host +.Ic receiver +section and +.Pa /var/audit/remote/<name> +for the +.Ic host +subsections in the +.Ic receiver +section where +.Aq name +is host's name. +.\".It Ic checksum Aq algorithm +.\".Pp +.\"Checksum algorithm should be one of the following: +.\".Bl -tag -width ".Ic sha256" +.\".It Ic none +.\"No checksum will be calculated for the data being send over the network. +.\"This is the default setting. +.\".It Ic crc32 +.\"CRC32 checksum will be calculated. +.\".It Ic sha256 +.\"SHA256 checksum will be calculated. +.\".El +.\".It Ic compression Aq algorithm +.\".Pp +.\"Compression algorithm should be one of the following: +.\".Bl -tag -width ".Ic none" +.\".It Ic none +.\"Data send over the network will not be compressed. +.\"This is the default setting. +.\".It Ic lzf +.\"The +.\".Nm LZF +.\"algorithm by +.\".An Marc Alexander Lehmann +.\"will be used to compress the data send over the network. +.\".Nm LZF +.\"is very fast, general purpose compression algorithm. +.\".El +.It Ic remote Aq addr +.Pp +Address of the remote +.Nm auditdistd +daemon. +Format is the same as for the +.Ic listen +statement. +When operating in the +.Ic sender +mode this address will be used to connect to the +.Ic receiver . +When operating in the +.Ic receiver +mode only connections from this address will be accepted. +.It Ic listen Aq addr +.Pp +Address to listen on in form of: +.Bd -literal -offset indent +protocol://protocol-specific-address +.Ed +.Pp +Each of the following examples defines the same listen address: +.Bd -literal -offset indent +0.0.0.0 +0.0.0.0:7878 +tcp://0.0.0.0 +tcp://0.0.0.0:7878 +tcp4://0.0.0.0 +tcp4://0.0.0.0:7878 +.Ed +.Pp +Multiple listen addresses can be specified. +By default +.Nm auditdistd +listens on +.Pa tcp4://0.0.0.0:7878 +and +.Pa tcp6://[::]:7878 +if kernel supports IPv4 and IPv6 respectively. +.It Ic keyfile Aq path +.Pp +Path to a file that contains private key for TLS communication. +.It Ic certfile Aq path +.Pp +Path to a file that contains certificate for TLS communication. +.It Ic fingerprint Aq algo=hash +.Pp +Finger print of the receiver's public key. +Currently only SHA256 algorithm is supported. +Certificate public key's fingerprint ready to be pasted into auditdistd +configuration file can be obtained by running: +.Bd -literal -offset +# openssl x509 -in /etc/security/auditdistd.cert.pem -noout -fingerprint -sha256 | awk -F '[ =]' '{printf("%s=%s\\n", $1, $3)}' +.Ed +.It Ic password Aq password +.Pp +Password used to authenticate the sender in front of the receiver. +.El +.Sh FILES +.Bl -tag -width ".Pa /etc/security/auditdistd.conf" -compact +.It Pa /etc/security/auditdistd.conf +The default +.Nm auditdistd +configuration file. +.El +.Sh EXAMPLES +The example configuration files can look as follows. +.Pp +Web server: +.Bd -literal -offset indent +sender { + host backup { + remote 10.0.0.4 + } +} +.Ed +.Pp +Audit backup server: +.Bd -literal -offset indent +receiver { + host webserv { + remote 10.0.0.1 + } + host mailserv { + remote 10.0.0.2 + } + host dnsserv { + remote 10.0.0.3 + } +} +.Ed +.Sh SEE ALSO +.Xr audit 4 , +.Xr auditdistd 8 . +.Sh AUTHORS +The +.Nm +was written by +.An Pawel Jakub Dawidek Aq pawel@dawidek.net +under sponsorship of the FreeBSD Foundation. diff --git a/bin/auditdistd/auditdistd.h b/bin/auditdistd/auditdistd.h new file mode 100644 index 000000000000..9ac2850a7f8b --- /dev/null +++ b/bin/auditdistd/auditdistd.h @@ -0,0 +1,276 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/auditdistd.h#2 $ + */ + +#ifndef _AUDITDISTD_H_ +#define _AUDITDISTD_H_ + +#include <sys/param.h> +#include <sys/queue.h> +#include <sys/socket.h> + +#include <arpa/inet.h> + +#include <netinet/in.h> + +#include <dirent.h> +#include <limits.h> +#include <pthread.h> +#include <stdbool.h> +#include <stdint.h> + +#include <compat/compat.h> + +#include "proto.h" + +/* + * Version history: + * 0 - initial version + */ +#define ADIST_VERSION 0 + +#define ADIST_ROLE_UNDEF 0 +#define ADIST_ROLE_SENDER 1 +#define ADIST_ROLE_RECEIVER 2 + +#define ADIST_USER "auditdistd" +#define ADIST_TIMEOUT 20 +#define ADIST_CONFIG "/etc/security/auditdistd.conf" +#define ADIST_TCP_PORT "7878" +#define ADIST_LISTEN_TLS_TCP4 "tls://0.0.0.0:" ADIST_TCP_PORT +#define ADIST_LISTEN_TLS_TCP6 "tls://[::]:" ADIST_TCP_PORT +#define ADIST_PIDFILE "/var/run/auditdistd.pid" +#define ADIST_DIRECTORY_SENDER "/var/audit/dist" +#define ADIST_DIRECTORY_RECEIVER "/var/audit/remote" +#define ADIST_CERTFILE "/etc/security/auditdistd.cert.pem" +#define ADIST_KEYFILE "/etc/security/auditdistd.key.pem" + +#define ADIST_ERROR_WRONG_ORDER 1 +#define ADIST_ERROR_INVALID_NAME 2 +#define ADIST_ERROR_OPEN_OLD 3 +#define ADIST_ERROR_CREATE 4 +#define ADIST_ERROR_OPEN 5 +#define ADIST_ERROR_READ 6 +#define ADIST_ERROR_WRITE 7 +#define ADIST_ERROR_RENAME 8 + +#define ADIST_ADDRSIZE 1024 +#define ADIST_HOSTSIZE 256 +#define ADIST_PATHSIZE 256 +#define ADIST_PASSWORDSIZE 128 +#define ADIST_FINGERPRINTSIZE 256 + +/* Number of seconds to sleep between reconnect retries or keepalive packets. */ +#define ADIST_KEEPALIVE 10 + +struct adist_listen { + /* Address to listen on. */ + char adl_addr[ADIST_ADDRSIZE]; + /* Protocol-specific data. */ + struct proto_conn *adl_conn; + TAILQ_ENTRY(adist_listen) adl_next; +}; + +struct adist_config { + /* Our name. */ + char adc_name[ADIST_HOSTSIZE]; + /* PID file path. */ + char adc_pidfile[PATH_MAX]; + /* Connection timeout. */ + int adc_timeout; + /* Path to receiver's certificate file. */ + char adc_certfile[PATH_MAX]; + /* Path to receiver's private key file. */ + char adc_keyfile[PATH_MAX]; + /* List of addresses to listen on. */ + TAILQ_HEAD(, adist_listen) adc_listen; + /* List of hosts. */ + TAILQ_HEAD(, adist_host) adc_hosts; +}; + +#define ADIST_COMPRESSION_NONE 0 +#define ADIST_COMPRESSION_LZF 1 + +#define ADIST_CHECKSUM_NONE 0 +#define ADIST_CHECKSUM_CRC32 1 +#define ADIST_CHECKSUM_SHA256 2 + +/* + * Structure that describes single host (either sender or receiver). + */ +struct adist_host { + /* Host name. */ + char adh_name[ADIST_HOSTSIZE]; + /* Host role: ADIST_ROLE_{SENDER,RECEIVER}. */ + int adh_role; + /* Protocol version negotiated. */ + int adh_version; + + /* Local address to bind to. */ + char adh_localaddr[ADIST_ADDRSIZE]; + /* Address of the remote component. */ + char adh_remoteaddr[ADIST_ADDRSIZE]; + /* Connection with remote host. */ + struct proto_conn *adh_remote; + /* Connection was reestablished, reset the state. */ + bool adh_reset; + + /* + * Directory from which audit trail files should be send in + * ADIST_ROLE_SENDER case or stored into in ADIST_ROLE_RECEIVER case. + */ + char adh_directory[PATH_MAX]; + /* Compression algorithm. Currently unused. */ + int adh_compression; + /* Checksum algorithm. Currently unused. */ + int adh_checksum; + + /* Sender's password. */ + char adh_password[ADIST_PASSWORDSIZE]; + /* Fingerprint of receiver's public key. */ + char adh_fingerprint[ADIST_FINGERPRINTSIZE]; + + /* PID of child worker process. 0 - no child. */ + pid_t adh_worker_pid; + /* Connection requests from sender to main. */ + struct proto_conn *adh_conn; + + /* Receiver-specific fields. */ + char adh_trail_name[ADIST_PATHSIZE]; + int adh_trail_fd; + int adh_trail_dirfd; + DIR *adh_trail_dirfp; + /* Sender-specific fields. */ + uint64_t adh_trail_offset; + + /* Next resource. */ + TAILQ_ENTRY(adist_host) adh_next; +}; + +#define ADIST_BYTEORDER_UNDEFINED 0 +#define ADIST_BYTEORDER_LITTLE_ENDIAN 1 +#define ADIST_BYTEORDER_BIG_ENDIAN 2 + +#if _BYTE_ORDER == _LITTLE_ENDIAN +#define ADIST_BYTEORDER ADIST_BYTEORDER_LITTLE_ENDIAN +#elif _BYTE_ORDER == _BIG_ENDIAN +#define ADIST_BYTEORDER ADIST_BYTEORDER_BIG_ENDIAN +#else +#error Unknown byte order. +#endif + +struct adpkt { + uint8_t adp_byteorder; +#define ADIST_CMD_UNDEFINED 0 +#define ADIST_CMD_OPEN 1 +#define ADIST_CMD_APPEND 2 +#define ADIST_CMD_CLOSE 3 +#define ADIST_CMD_KEEPALIVE 4 +#define ADIST_CMD_ERROR 5 + uint8_t adp_cmd; + uint64_t adp_seq; + uint32_t adp_datasize; + unsigned char adp_data[0]; +} __packed; + +struct adreq { + int adr_error; + TAILQ_ENTRY(adreq) adr_next; + struct adpkt adr_packet; +}; + +#define adr_byteorder adr_packet.adp_byteorder +#define adr_cmd adr_packet.adp_cmd +#define adr_seq adr_packet.adp_seq +#define adr_datasize adr_packet.adp_datasize +#define adr_data adr_packet.adp_data + +#define ADPKT_SIZE(adreq) (sizeof((adreq)->adr_packet) + (adreq)->adr_datasize) + +struct adrep { + uint8_t adrp_byteorder; + uint64_t adrp_seq; + uint16_t adrp_error; +} __packed; + +#define ADIST_QUEUE_SIZE 16 +#define ADIST_BUF_SIZE 65536 + +#define QUEUE_TAKE(adreq, list, timeout) do { \ + mtx_lock(list##_lock); \ + if ((timeout) == 0) { \ + while (((adreq) = TAILQ_FIRST(list)) == NULL) \ + cv_wait(list##_cond, list##_lock); \ + } else { \ + (adreq) = TAILQ_FIRST(list); \ + if ((adreq) == NULL) { \ + cv_timedwait(list##_cond, list##_lock, \ + (timeout)); \ + (adreq) = TAILQ_FIRST(list); \ + } \ + } \ + if ((adreq) != NULL) \ + TAILQ_REMOVE((list), (adreq), adr_next); \ + mtx_unlock(list##_lock); \ +} while (0) +#define QUEUE_INSERT(adreq, list) do { \ + bool _wakeup; \ + \ + mtx_lock(list##_lock); \ + _wakeup = TAILQ_EMPTY(list); \ + TAILQ_INSERT_TAIL((list), (adreq), adr_next); \ + mtx_unlock(list##_lock); \ + if (_wakeup) \ + cv_signal(list##_cond); \ +} while (0) +#define QUEUE_WAIT(list) do { \ + mtx_lock(list##_lock); \ + while (TAILQ_EMPTY(list)) \ + cv_wait(list##_cond, list##_lock); \ + mtx_unlock(list##_lock); \ +} while (0) + +extern const char *cfgpath; +extern bool sigexit_received; +extern struct pidfh *pfh; + +void descriptors_cleanup(struct adist_host *adhost); +void descriptors_assert(const struct adist_host *adhost, int pjdlogmode); + +void adist_sender(struct adist_config *config, struct adist_host *adhost); +void adist_receiver(struct adist_config *config, struct adist_host *adhost); + +struct adist_config *yy_config_parse(const char *config, bool exitonerror); +void yy_config_free(struct adist_config *config); + +void yyerror(const char *); +int yylex(void); + +#endif /* !_AUDITDISTD_H_ */ diff --git a/bin/auditdistd/faccessat.h b/bin/auditdistd/faccessat.h new file mode 100644 index 000000000000..37d8b89d87a3 --- /dev/null +++ b/bin/auditdistd/faccessat.h @@ -0,0 +1,69 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/faccessat.h#1 $ + */ + +#ifndef _FACCESSAT_H_ +#define _FACCESSAT_H_ + +#include <unistd.h> + +#define AT_EACCESS 0x01 + +static int +faccessat(int fd, const char *path, int mode, int flag) +{ + int cfd, error, ret; + + if (flag == AT_EACCESS) { + errno = EINVAL; + return (-1); + } + + cfd = open(".", O_RDONLY | O_DIRECTORY); + if (cfd == -1) + return (-1); + + if (fchdir(fd) == -1) { + error = errno; + (void)close(cfd); + errno = error; + return (-1); + } + + ret = access(path, mode); + + error = errno; + (void)fchdir(cfd); + (void)close(cfd); + errno = error; + return (ret); +} + +#endif /* !_FACCESSAT_H_ */ diff --git a/bin/auditdistd/fstatat.h b/bin/auditdistd/fstatat.h new file mode 100644 index 000000000000..a2716b97629e --- /dev/null +++ b/bin/auditdistd/fstatat.h @@ -0,0 +1,69 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/fstatat.h#1 $ + */ + +#ifndef _FSTATAT_H_ +#define _FSTATAT_H_ + +#include <sys/stat.h> + +#include <unistd.h> + +#define AT_SYMLINK_NOFOLLOW 0x01 + +static int +fstatat(int fd, const char *path, struct stat *buf, int flag) +{ + int cfd, error, ret; + + cfd = open(".", O_RDONLY | O_DIRECTORY); + if (cfd == -1) + return (-1); + + if (fchdir(fd) == -1) { + error = errno; + (void)close(cfd); + errno = error; + return (-1); + } + + if (flag == AT_SYMLINK_NOFOLLOW) + ret = lstat(path, buf); + else + ret = stat(path, buf); + + error = errno; + (void)fchdir(cfd); + (void)close(cfd); + errno = error; + return (ret); +} + +#endif /* !_FSTATAT_H_ */ diff --git a/bin/auditdistd/openat.h b/bin/auditdistd/openat.h new file mode 100644 index 000000000000..defb94746508 --- /dev/null +++ b/bin/auditdistd/openat.h @@ -0,0 +1,75 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/openat.h#1 $ + */ + +#ifndef _OPENAT_H_ +#define _OPENAT_H_ + +#include <fcntl.h> +#include <stdarg.h> +#include <unistd.h> + +static int +openat(int fd, const char *path, int flags, ...) +{ + int cfd, ffd, error; + + cfd = open(".", O_RDONLY | O_DIRECTORY); + if (cfd == -1) + return (-1); + + if (fchdir(fd) == -1) { + error = errno; + (void)close(cfd); + errno = error; + return (-1); + } + + if ((flags & O_CREAT) != 0) { + va_list ap; + int mode; + + va_start(ap, flags); + mode = va_arg(ap, int); + va_end(ap); + + ffd = open(path, flags, mode); + } else { + ffd = open(path, flags); + } + + error = errno; + (void)fchdir(cfd); + (void)close(cfd); + errno = error; + return (ffd); +} + +#endif /* !_OPENAT_H_ */ diff --git a/bin/auditdistd/parse.y b/bin/auditdistd/parse.y new file mode 100644 index 000000000000..22761624eb09 --- /dev/null +++ b/bin/auditdistd/parse.y @@ -0,0 +1,857 @@ +%{ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/parse.y#3 $ + */ + +#include "config.h" + +#include <sys/types.h> +#include <sys/queue.h> +#include <sys/sysctl.h> + +#include <arpa/inet.h> + +#include <err.h> +#include <errno.h> +#include <stdio.h> +#include <string.h> +#include <sysexits.h> +#include <unistd.h> +#ifndef HAVE_STRLCPY +#include <compat/strlcpy.h> +#endif + +#include <pjdlog.h> + +#include "auditdistd.h" + +extern int depth; +extern int lineno; + +extern FILE *yyin; +extern char *yytext; + +static struct adist_config *lconfig; +static struct adist_host *curhost; +#define SECTION_GLOBAL 0 +#define SECTION_SENDER 1 +#define SECTION_RECEIVER 2 +static int cursection; + +/* Sender section. */ +static char depth1_source[ADIST_ADDRSIZE]; +static int depth1_checksum; +static int depth1_compression; +/* Sender and receiver sections. */ +static char depth1_directory[PATH_MAX]; + +static bool adjust_directory(char *path); +static bool family_supported(int family); + +extern void yyrestart(FILE *); +%} + +%token CB +%token CERTFILE +%token DIRECTORY +%token FINGERPRINT +%token HOST +%token KEYFILE +%token LISTEN +%token NAME +%token OB +%token PASSWORD +%token PIDFILE +%token RECEIVER REMOTE +%token SENDER SOURCE +%token TIMEOUT + +/* +%type <num> checksum_type +%type <num> compression_type +*/ + +%union +{ + int num; + char *str; +} + +%token <num> NUM +%token <str> STR + +%% + +statements: + | + statements statement + ; + +statement: + name_statement + | + pidfile_statement + | + timeout_statement + | + sender_statement + | + receiver_statement + ; + +name_statement: NAME STR + { + PJDLOG_RASSERT(depth == 0, + "The name variable can only be specificed in the global section."); + + if (lconfig->adc_name[0] != '\0') { + pjdlog_error("The name variable is specified twice."); + free($2); + return (1); + } + if (strlcpy(lconfig->adc_name, $2, + sizeof(lconfig->adc_name)) >= + sizeof(lconfig->adc_name)) { + pjdlog_error("The name value is too long."); + free($2); + return (1); + } + free($2); + } + ; + +pidfile_statement: PIDFILE STR + { + PJDLOG_RASSERT(depth == 0, + "The pidfile variable can only be specificed in the global section."); + + if (lconfig->adc_pidfile[0] != '\0') { + pjdlog_error("The pidfile variable is specified twice."); + free($2); + return (1); + } + if (strcmp($2, "none") != 0 && $2[0] != '/') { + pjdlog_error("The pidfile variable must be set to absolute pathname or \"none\"."); + free($2); + return (1); + } + if (strlcpy(lconfig->adc_pidfile, $2, + sizeof(lconfig->adc_pidfile)) >= + sizeof(lconfig->adc_pidfile)) { + pjdlog_error("The pidfile value is too long."); + free($2); + return (1); + } + free($2); + } + ; + +timeout_statement: TIMEOUT NUM + { + PJDLOG_ASSERT(depth == 0); + + lconfig->adc_timeout = $2; + } + ; + +sender_statement: SENDER sender_start sender_entries CB + { + PJDLOG_ASSERT(depth == 0); + PJDLOG_ASSERT(cursection == SECTION_SENDER); + + /* Configure defaults. */ + if (depth1_checksum == -1) + depth1_checksum = ADIST_CHECKSUM_NONE; + if (depth1_compression == -1) + depth1_compression = ADIST_COMPRESSION_NONE; + if (depth1_directory[0] == '\0') { + (void)strlcpy(depth1_directory, ADIST_DIRECTORY_SENDER, + sizeof(depth1_directory)); + } + /* Empty depth1_source is ok. */ + TAILQ_FOREACH(curhost, &lconfig->adc_hosts, adh_next) { + if (curhost->adh_role != ADIST_ROLE_SENDER) + continue; + if (curhost->adh_checksum == -1) + curhost->adh_checksum = depth1_checksum; + if (curhost->adh_compression == -1) + curhost->adh_compression = depth1_compression; + if (curhost->adh_directory[0] == '\0') { + (void)strlcpy(curhost->adh_directory, + depth1_directory, + sizeof(curhost->adh_directory)); + } + if (curhost->adh_localaddr[0] == '\0') { + (void)strlcpy(curhost->adh_localaddr, + depth1_source, + sizeof(curhost->adh_localaddr)); + } + } + cursection = SECTION_GLOBAL; + } + ; + +sender_start: OB + { + PJDLOG_ASSERT(depth == 1); + PJDLOG_ASSERT(cursection == SECTION_GLOBAL); + + cursection = SECTION_SENDER; + depth1_checksum = -1; + depth1_compression = -1; + depth1_source[0] = '\0'; + depth1_directory[0] = '\0'; + +#ifndef HAVE_AUDIT_SYSCALLS + pjdlog_error("Sender functionality is not available."); + return (1); +#endif + } + ; + +sender_entries: + | + sender_entries sender_entry + ; + +sender_entry: + source_statement + | + directory_statement +/* + | + checksum_statement + | + compression_statement +*/ + | + sender_host_statement + ; + +receiver_statement: RECEIVER receiver_start receiver_entries CB + { + PJDLOG_ASSERT(depth == 0); + PJDLOG_ASSERT(cursection == SECTION_RECEIVER); + + /* + * If not listen addresses were specified, + * configure default ones. + */ + if (TAILQ_EMPTY(&lconfig->adc_listen)) { + struct adist_listen *lst; + + if (family_supported(AF_INET)) { + lst = calloc(1, sizeof(*lst)); + if (lst == NULL) { + pjdlog_error("Unable to allocate memory for listen address."); + return (1); + } + (void)strlcpy(lst->adl_addr, + ADIST_LISTEN_TLS_TCP4, + sizeof(lst->adl_addr)); + TAILQ_INSERT_TAIL(&lconfig->adc_listen, lst, adl_next); + } else { + pjdlog_debug(1, + "No IPv4 support in the kernel, not listening on IPv4 address."); + } + if (family_supported(AF_INET6)) { + lst = calloc(1, sizeof(*lst)); + if (lst == NULL) { + pjdlog_error("Unable to allocate memory for listen address."); + return (1); + } + (void)strlcpy(lst->adl_addr, + ADIST_LISTEN_TLS_TCP6, + sizeof(lst->adl_addr)); + TAILQ_INSERT_TAIL(&lconfig->adc_listen, lst, adl_next); + } else { + pjdlog_debug(1, + "No IPv6 support in the kernel, not listening on IPv6 address."); + } + if (TAILQ_EMPTY(&lconfig->adc_listen)) { + pjdlog_error("No address to listen on."); + return (1); + } + } + /* Configure defaults. */ + if (depth1_directory[0] == '\0') { + (void)strlcpy(depth1_directory, + ADIST_DIRECTORY_RECEIVER, + sizeof(depth1_directory)); + } + TAILQ_FOREACH(curhost, &lconfig->adc_hosts, adh_next) { + if (curhost->adh_role != ADIST_ROLE_RECEIVER) + continue; + if (curhost->adh_directory[0] == '\0') { + if (snprintf(curhost->adh_directory, + sizeof(curhost->adh_directory), "%s/%s", + depth1_directory, curhost->adh_name) >= + (ssize_t)sizeof(curhost->adh_directory)) { + pjdlog_error("Directory value is too long."); + return (1); + } + } + } + cursection = SECTION_GLOBAL; + } + ; + +receiver_start: OB + { + PJDLOG_ASSERT(depth == 1); + PJDLOG_ASSERT(cursection == SECTION_GLOBAL); + + cursection = SECTION_RECEIVER; + depth1_directory[0] = '\0'; + } + ; + +receiver_entries: + | + receiver_entries receiver_entry + ; + +receiver_entry: + listen_statement + | + directory_statement + | + certfile_statement + | + keyfile_statement + | + receiver_host_statement + ; + +/* +checksum_statement: CHECKSUM checksum_type + { + PJDLOG_ASSERT(cursection == SECTION_SENDER); + + switch (depth) { + case 1: + depth1_checksum = $2; + break; + case 2: + PJDLOG_ASSERT(curhost != NULL); + curhost->adh_checksum = $2; + break; + default: + PJDLOG_ABORT("checksum at wrong depth level"); + } + } + ; + +checksum_type: + NONE { $$ = ADIST_CHECKSUM_NONE; } + | + CRC32 { $$ = ADIST_CHECKSUM_CRC32; } + | + SHA256 { $$ = ADIST_CHECKSUM_SHA256; } + ; + +compression_statement: COMPRESSION compression_type + { + PJDLOG_ASSERT(cursection == SECTION_SENDER); + + switch (depth) { + case 1: + depth1_compression = $2; + break; + case 2: + PJDLOG_ASSERT(curhost != NULL); + curhost->adh_compression = $2; + break; + default: + PJDLOG_ABORT("compression at wrong depth level"); + } + } + ; + +compression_type: + NONE { $$ = ADIST_COMPRESSION_NONE; } + | + LZF { $$ = ADIST_COMPRESSION_LZF; } + ; +*/ + +directory_statement: DIRECTORY STR + { + PJDLOG_ASSERT(cursection == SECTION_SENDER || + cursection == SECTION_RECEIVER); + + switch (depth) { + case 1: + if (strlcpy(depth1_directory, $2, + sizeof(depth1_directory)) >= + sizeof(depth1_directory)) { + pjdlog_error("Directory value is too long."); + free($2); + return (1); + } + if (!adjust_directory(depth1_directory)) + return (1); + break; + case 2: + if (cursection == SECTION_SENDER || $2[0] == '/') { + if (strlcpy(curhost->adh_directory, $2, + sizeof(curhost->adh_directory)) >= + sizeof(curhost->adh_directory)) { + pjdlog_error("Directory value is too long."); + free($2); + return (1); + } + } else /* if (cursection == SECTION_RECEIVER) */ { + if (depth1_directory[0] == '\0') { + pjdlog_error("Directory path must be absolute."); + free($2); + return (1); + } + if (snprintf(curhost->adh_directory, + sizeof(curhost->adh_directory), "%s/%s", + depth1_directory, $2) >= + (ssize_t)sizeof(curhost->adh_directory)) { + pjdlog_error("Directory value is too long."); + free($2); + return (1); + } + } + break; + default: + PJDLOG_ABORT("directory at wrong depth level"); + } + free($2); + } + ; + +source_statement: SOURCE STR + { + PJDLOG_RASSERT(cursection == SECTION_SENDER, + "The source variable must be in sender section."); + + switch (depth) { + case 1: + if (strlcpy(depth1_source, $2, + sizeof(depth1_source)) >= + sizeof(depth1_source)) { + pjdlog_error("Source value is too long."); + free($2); + return (1); + } + break; + case 2: + if (strlcpy(curhost->adh_localaddr, $2, + sizeof(curhost->adh_localaddr)) >= + sizeof(curhost->adh_localaddr)) { + pjdlog_error("Source value is too long."); + free($2); + return (1); + } + break; + } + free($2); + } + ; + +fingerprint_statement: FINGERPRINT STR + { + PJDLOG_ASSERT(cursection == SECTION_SENDER); + PJDLOG_ASSERT(depth == 2); + + if (strncasecmp($2, "SHA256=", 7) != 0) { + pjdlog_error("Invalid fingerprint value."); + free($2); + return (1); + } + if (strlcpy(curhost->adh_fingerprint, $2, + sizeof(curhost->adh_fingerprint)) >= + sizeof(curhost->adh_fingerprint)) { + pjdlog_error("Fingerprint value is too long."); + free($2); + return (1); + } + free($2); + } + ; + +password_statement: PASSWORD STR + { + PJDLOG_ASSERT(cursection == SECTION_SENDER || + cursection == SECTION_RECEIVER); + PJDLOG_ASSERT(depth == 2); + + if (strlcpy(curhost->adh_password, $2, + sizeof(curhost->adh_password)) >= + sizeof(curhost->adh_password)) { + pjdlog_error("Password value is too long."); + bzero($2, strlen($2)); + free($2); + return (1); + } + bzero($2, strlen($2)); + free($2); + } + ; + +certfile_statement: CERTFILE STR + { + PJDLOG_ASSERT(cursection == SECTION_RECEIVER); + PJDLOG_ASSERT(depth == 1); + + if (strlcpy(lconfig->adc_certfile, $2, + sizeof(lconfig->adc_certfile)) >= + sizeof(lconfig->adc_certfile)) { + pjdlog_error("Certfile value is too long."); + free($2); + return (1); + } + free($2); + } + ; + +keyfile_statement: KEYFILE STR + { + PJDLOG_ASSERT(cursection == SECTION_RECEIVER); + PJDLOG_ASSERT(depth == 1); + + if (strlcpy(lconfig->adc_keyfile, $2, + sizeof(lconfig->adc_keyfile)) >= + sizeof(lconfig->adc_keyfile)) { + pjdlog_error("Keyfile value is too long."); + free($2); + return (1); + } + free($2); + } + ; + +listen_statement: LISTEN STR + { + struct adist_listen *lst; + + PJDLOG_ASSERT(depth == 1); + PJDLOG_ASSERT(cursection == SECTION_RECEIVER); + + lst = calloc(1, sizeof(*lst)); + if (lst == NULL) { + pjdlog_error("Unable to allocate memory for listen address."); + free($2); + return (1); + } + if (strlcpy(lst->adl_addr, $2, sizeof(lst->adl_addr)) >= + sizeof(lst->adl_addr)) { + pjdlog_error("listen argument is too long."); + free($2); + free(lst); + return (1); + } + TAILQ_INSERT_TAIL(&lconfig->adc_listen, lst, adl_next); + free($2); + } + ; + +sender_host_statement: HOST host_start OB sender_host_entries CB + { + /* Put it onto host list. */ + TAILQ_INSERT_TAIL(&lconfig->adc_hosts, curhost, adh_next); + curhost = NULL; + } + ; + +receiver_host_statement: HOST host_start OB receiver_host_entries CB + { + /* Put it onto host list. */ + TAILQ_INSERT_TAIL(&lconfig->adc_hosts, curhost, adh_next); + curhost = NULL; + } + ; + +host_start: STR + { + /* Check if there is no duplicate entry. */ + TAILQ_FOREACH(curhost, &lconfig->adc_hosts, adh_next) { + if (strcmp(curhost->adh_name, $1) != 0) + continue; + if (curhost->adh_role == ADIST_ROLE_SENDER && + cursection == SECTION_RECEIVER) { + continue; + } + if (curhost->adh_role == ADIST_ROLE_RECEIVER && + cursection == SECTION_SENDER) { + continue; + } + pjdlog_error("%s host %s is configured more than once.", + curhost->adh_role == ADIST_ROLE_SENDER ? + "Sender" : "Receiver", curhost->adh_name); + free($1); + return (1); + } + + curhost = calloc(1, sizeof(*curhost)); + if (curhost == NULL) { + pjdlog_error("Unable to allocate memory for host configuration."); + free($1); + return (1); + } + if (strlcpy(curhost->adh_name, $1, sizeof(curhost->adh_name)) >= + sizeof(curhost->adh_name)) { + pjdlog_error("Host name is too long."); + free($1); + return (1); + } + free($1); + curhost->adh_role = cursection == SECTION_SENDER ? + ADIST_ROLE_SENDER : ADIST_ROLE_RECEIVER; + curhost->adh_version = ADIST_VERSION; + curhost->adh_localaddr[0] = '\0'; + curhost->adh_remoteaddr[0] = '\0'; + curhost->adh_remote = NULL; + curhost->adh_directory[0] = '\0'; + curhost->adh_password[0] = '\0'; + curhost->adh_fingerprint[0] = '\0'; + curhost->adh_worker_pid = 0; + curhost->adh_conn = NULL; + } + ; + +sender_host_entries: + | + sender_host_entries sender_host_entry + ; + +sender_host_entry: + source_statement + | + remote_statement + | + directory_statement + | + fingerprint_statement + | + password_statement +/* + | + checksum_statement + | + compression_statement +*/ + ; + +receiver_host_entries: + | + receiver_host_entries receiver_host_entry + ; + +receiver_host_entry: + remote_statement + | + directory_statement + | + password_statement + ; + +remote_statement: REMOTE STR + { + PJDLOG_ASSERT(depth == 2); + PJDLOG_ASSERT(cursection == SECTION_SENDER || + cursection == SECTION_RECEIVER); + + if (strlcpy(curhost->adh_remoteaddr, $2, + sizeof(curhost->adh_remoteaddr)) >= + sizeof(curhost->adh_remoteaddr)) { + pjdlog_error("Remote value is too long."); + free($2); + return (1); + } + free($2); + } + ; + +%% + +static bool +family_supported(int family) +{ + int sock; + + sock = socket(family, SOCK_STREAM, 0); + if (sock == -1 && errno == EPROTONOSUPPORT) + return (false); + if (sock >= 0) + (void)close(sock); + return (true); +} + +static bool +adjust_directory(char *path) +{ + size_t len; + + len = strlen(path); + for (;;) { + if (len == 0) { + pjdlog_error("Directory path is empty."); + return (false); + } + if (path[len - 1] != '/') + break; + len--; + path[len] = '\0'; + } + if (path[0] != '/') { + pjdlog_error("Directory path must be absolute."); + return (false); + } + return (true); +} + +static int +my_name(char *name, size_t size) +{ + char buf[MAXHOSTNAMELEN]; + char *pos; + + if (gethostname(buf, sizeof(buf)) < 0) { + pjdlog_errno(LOG_ERR, "gethostname() failed"); + return (-1); + } + + /* First component of the host name. */ + pos = strchr(buf, '.'); + if (pos == NULL) + (void)strlcpy(name, buf, size); + else + (void)strlcpy(name, buf, MIN((size_t)(pos - buf + 1), size)); + + if (name[0] == '\0') { + pjdlog_error("Empty host name."); + return (-1); + } + + return (0); +} + +void +yyerror(const char *str) +{ + + pjdlog_error("Unable to parse configuration file at line %d near '%s': %s", + lineno, yytext, str); +} + +struct adist_config * +yy_config_parse(const char *config, bool exitonerror) +{ + int ret; + + curhost = NULL; + cursection = SECTION_GLOBAL; + depth = 0; + lineno = 0; + + lconfig = calloc(1, sizeof(*lconfig)); + if (lconfig == NULL) { + pjdlog_error("Unable to allocate memory for configuration."); + if (exitonerror) + exit(EX_TEMPFAIL); + return (NULL); + } + TAILQ_INIT(&lconfig->adc_hosts); + TAILQ_INIT(&lconfig->adc_listen); + lconfig->adc_name[0] = '\0'; + lconfig->adc_timeout = -1; + lconfig->adc_pidfile[0] = '\0'; + lconfig->adc_certfile[0] = '\0'; + lconfig->adc_keyfile[0] = '\0'; + + yyin = fopen(config, "r"); + if (yyin == NULL) { + pjdlog_errno(LOG_ERR, "Unable to open configuration file %s", + config); + yy_config_free(lconfig); + if (exitonerror) + exit(EX_OSFILE); + return (NULL); + } + yyrestart(yyin); + ret = yyparse(); + fclose(yyin); + if (ret != 0) { + yy_config_free(lconfig); + if (exitonerror) + exit(EX_CONFIG); + return (NULL); + } + + /* + * Let's see if everything is set up. + */ + if (lconfig->adc_name[0] == '\0' && my_name(lconfig->adc_name, + sizeof(lconfig->adc_name)) == -1) { + yy_config_free(lconfig); + if (exitonerror) + exit(EX_CONFIG); + return (NULL); + } + if (lconfig->adc_timeout == -1) + lconfig->adc_timeout = ADIST_TIMEOUT; + if (lconfig->adc_pidfile[0] == '\0') { + (void)strlcpy(lconfig->adc_pidfile, ADIST_PIDFILE, + sizeof(lconfig->adc_pidfile)); + } + if (lconfig->adc_certfile[0] == '\0') { + (void)strlcpy(lconfig->adc_certfile, ADIST_CERTFILE, + sizeof(lconfig->adc_certfile)); + } + if (lconfig->adc_keyfile[0] == '\0') { + (void)strlcpy(lconfig->adc_keyfile, ADIST_KEYFILE, + sizeof(lconfig->adc_keyfile)); + } + + return (lconfig); +} + +void +yy_config_free(struct adist_config *config) +{ + struct adist_host *adhost; + struct adist_listen *lst; + + while ((lst = TAILQ_FIRST(&config->adc_listen)) != NULL) { + TAILQ_REMOVE(&config->adc_listen, lst, adl_next); + free(lst); + } + while ((adhost = TAILQ_FIRST(&config->adc_hosts)) != NULL) { + TAILQ_REMOVE(&config->adc_hosts, adhost, adh_next); + bzero(adhost, sizeof(*adhost)); + free(adhost); + } + free(config); +} diff --git a/bin/auditdistd/pjdlog.c b/bin/auditdistd/pjdlog.c new file mode 100644 index 000000000000..e8d5876dfcd3 --- /dev/null +++ b/bin/auditdistd/pjdlog.c @@ -0,0 +1,621 @@ +/*- + * Copyright (c) 2009-2010 The FreeBSD Foundation + * Copyright (c) 2011 Pawel Jakub Dawidek <pjd@FreeBSD.org> + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/pjdlog.c#1 $ + */ + +#include <sys/types.h> +#include <sys/socket.h> +#include <netinet/in.h> +#include <arpa/inet.h> + +#include <assert.h> +#include <errno.h> +#ifdef __FreeBSD__ +#include <libutil.h> +#include <printf.h> +#endif +#include <stdarg.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <syslog.h> +#include <unistd.h> + +#include "pjdlog.h" + +#define PJDLOG_NEVER_INITIALIZED 0 +#define PJDLOG_NOT_INITIALIZED 1 +#define PJDLOG_INITIALIZED 2 + +static int pjdlog_initialized = PJDLOG_NEVER_INITIALIZED; +static int pjdlog_mode, pjdlog_debug_level; +static char pjdlog_prefix[128]; + +#ifdef __FreeBSD__ +static int +pjdlog_printf_arginfo_humanized_number(const struct printf_info *pi __unused, + size_t n, int *argt) +{ + + assert(n >= 1); + argt[0] = PA_INT | PA_FLAG_INTMAX; + return (1); +} + +static int +pjdlog_printf_render_humanized_number(struct __printf_io *io, + const struct printf_info *pi, const void * const *arg) +{ + char buf[5]; + intmax_t num; + int ret; + + num = *(const intmax_t *)arg[0]; + humanize_number(buf, sizeof(buf), (int64_t)num, "", HN_AUTOSCALE, + HN_NOSPACE | HN_DECIMAL); + ret = __printf_out(io, pi, buf, strlen(buf)); + __printf_flush(io); + return (ret); +} + +static int +pjdlog_printf_arginfo_sockaddr(const struct printf_info *pi __unused, + size_t n, int *argt) +{ + + assert(n >= 1); + argt[0] = PA_POINTER; + return (1); +} + +static int +pjdlog_printf_render_sockaddr(struct __printf_io *io, + const struct printf_info *pi, const void * const *arg) +{ + const struct sockaddr_storage *ss; + char buf[64]; + int ret; + + ss = *(const struct sockaddr_storage * const *)arg[0]; + switch (ss->ss_family) { + case AF_INET: + { + char addr[INET_ADDRSTRLEN]; + const struct sockaddr_in *sin; + unsigned int port; + + sin = (const struct sockaddr_in *)ss; + port = ntohs(sin->sin_port); + if (inet_ntop(ss->ss_family, &sin->sin_addr, addr, + sizeof(addr)) == NULL) { + PJDLOG_ABORT("inet_ntop(AF_INET) failed: %s.", + strerror(errno)); + } + snprintf(buf, sizeof(buf), "%s:%u", addr, port); + break; + } + case AF_INET6: + { + char addr[INET6_ADDRSTRLEN]; + const struct sockaddr_in6 *sin; + unsigned int port; + + sin = (const struct sockaddr_in6 *)ss; + port = ntohs(sin->sin6_port); + if (inet_ntop(ss->ss_family, &sin->sin6_addr, addr, + sizeof(addr)) == NULL) { + PJDLOG_ABORT("inet_ntop(AF_INET6) failed: %s.", + strerror(errno)); + } + snprintf(buf, sizeof(buf), "[%s]:%u", addr, port); + break; + } + default: + snprintf(buf, sizeof(buf), "[unsupported family %hhu]", + ss->ss_family); + break; + } + ret = __printf_out(io, pi, buf, strlen(buf)); + __printf_flush(io); + return (ret); +} +#endif /* __FreeBSD__ */ + +void +pjdlog_init(int mode) +{ + int saved_errno; + + assert(pjdlog_initialized == PJDLOG_NEVER_INITIALIZED || + pjdlog_initialized == PJDLOG_NOT_INITIALIZED); + assert(mode == PJDLOG_MODE_STD || mode == PJDLOG_MODE_SYSLOG); + + saved_errno = errno; + + if (pjdlog_initialized == PJDLOG_NEVER_INITIALIZED) { +#ifdef __FreeBSD__ + __use_xprintf = 1; + register_printf_render_std("T"); + register_printf_render('N', + pjdlog_printf_render_humanized_number, + pjdlog_printf_arginfo_humanized_number); + register_printf_render('S', + pjdlog_printf_render_sockaddr, + pjdlog_printf_arginfo_sockaddr); +#endif + } + + if (mode == PJDLOG_MODE_SYSLOG) + openlog(NULL, LOG_PID | LOG_NDELAY, LOG_DAEMON); + pjdlog_mode = mode; + pjdlog_debug_level = 0; + bzero(pjdlog_prefix, sizeof(pjdlog_prefix)); + + pjdlog_initialized = PJDLOG_INITIALIZED; + + errno = saved_errno; +} + +void +pjdlog_fini(void) +{ + int saved_errno; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + saved_errno = errno; + + if (pjdlog_mode == PJDLOG_MODE_SYSLOG) + closelog(); + + pjdlog_initialized = PJDLOG_NOT_INITIALIZED; + + errno = saved_errno; +} + +/* + * Configure where the logs should go. + * By default they are send to stdout/stderr, but after going into background + * (eg. by calling daemon(3)) application is responsible for changing mode to + * PJDLOG_MODE_SYSLOG, so logs will be send to syslog. + */ +void +pjdlog_mode_set(int mode) +{ + int saved_errno; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + assert(mode == PJDLOG_MODE_STD || mode == PJDLOG_MODE_SYSLOG); + + if (pjdlog_mode == mode) + return; + + saved_errno = errno; + + if (mode == PJDLOG_MODE_SYSLOG) + openlog(NULL, LOG_PID | LOG_NDELAY, LOG_DAEMON); + else /* if (mode == PJDLOG_MODE_STD) */ + closelog(); + + pjdlog_mode = mode; + + errno = saved_errno; +} + +/* + * Return current mode. + */ +int +pjdlog_mode_get(void) +{ + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + return (pjdlog_mode); +} + +/* + * Set debug level. All the logs above the level specified here will be + * ignored. + */ +void +pjdlog_debug_set(int level) +{ + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + assert(level >= 0); + + pjdlog_debug_level = level; +} + +/* + * Return current debug level. + */ +int +pjdlog_debug_get(void) +{ + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + return (pjdlog_debug_level); +} + +/* + * Set prefix that will be used before each log. + * Setting prefix to NULL will remove it. + */ +void +pjdlog_prefix_set(const char *fmt, ...) +{ + va_list ap; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + va_start(ap, fmt); + pjdlogv_prefix_set(fmt, ap); + va_end(ap); +} + +/* + * Set prefix that will be used before each log. + * Setting prefix to NULL will remove it. + */ +void +pjdlogv_prefix_set(const char *fmt, va_list ap) +{ + int saved_errno; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + assert(fmt != NULL); + + saved_errno = errno; + + vsnprintf(pjdlog_prefix, sizeof(pjdlog_prefix), fmt, ap); + + errno = saved_errno; +} + +/* + * Convert log level into string. + */ +static const char * +pjdlog_level_string(int loglevel) +{ + + switch (loglevel) { + case LOG_EMERG: + return ("EMERG"); + case LOG_ALERT: + return ("ALERT"); + case LOG_CRIT: + return ("CRIT"); + case LOG_ERR: + return ("ERROR"); + case LOG_WARNING: + return ("WARNING"); + case LOG_NOTICE: + return ("NOTICE"); + case LOG_INFO: + return ("INFO"); + case LOG_DEBUG: + return ("DEBUG"); + } + assert(!"Invalid log level."); + abort(); /* XXX: gcc */ +} + +/* + * Common log routine. + */ +void +pjdlog_common(int loglevel, int debuglevel, int error, const char *fmt, ...) +{ + va_list ap; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + va_start(ap, fmt); + pjdlogv_common(loglevel, debuglevel, error, fmt, ap); + va_end(ap); +} + +/* + * Common log routine, which can handle regular log level as well as debug + * level. We decide here where to send the logs (stdout/stderr or syslog). + */ +void +pjdlogv_common(int loglevel, int debuglevel, int error, const char *fmt, + va_list ap) +{ + int saved_errno; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + assert(loglevel == LOG_EMERG || loglevel == LOG_ALERT || + loglevel == LOG_CRIT || loglevel == LOG_ERR || + loglevel == LOG_WARNING || loglevel == LOG_NOTICE || + loglevel == LOG_INFO || loglevel == LOG_DEBUG); + assert(loglevel != LOG_DEBUG || debuglevel > 0); + assert(error >= -1); + + /* Ignore debug above configured level. */ + if (loglevel == LOG_DEBUG && debuglevel > pjdlog_debug_level) + return; + + saved_errno = errno; + + switch (pjdlog_mode) { + case PJDLOG_MODE_STD: + { + FILE *out; + + /* + * We send errors and warning to stderr and the rest to stdout. + */ + switch (loglevel) { + case LOG_EMERG: + case LOG_ALERT: + case LOG_CRIT: + case LOG_ERR: + case LOG_WARNING: + out = stderr; + break; + case LOG_NOTICE: + case LOG_INFO: + case LOG_DEBUG: + out = stdout; + break; + default: + assert(!"Invalid loglevel."); + abort(); /* XXX: gcc */ + } + + fprintf(out, "(%d) ", getpid()); + fprintf(out, "[%s]", pjdlog_level_string(loglevel)); + /* Attach debuglevel if this is debug log. */ + if (loglevel == LOG_DEBUG) + fprintf(out, "[%d]", debuglevel); + fprintf(out, " %s", pjdlog_prefix); + vfprintf(out, fmt, ap); + if (error != -1) + fprintf(out, ": %s.", strerror(error)); + fprintf(out, "\n"); + fflush(out); + break; + } + case PJDLOG_MODE_SYSLOG: + { + char log[1024]; + int len; + + len = snprintf(log, sizeof(log), "%s", pjdlog_prefix); + if ((size_t)len < sizeof(log)) + len += vsnprintf(log + len, sizeof(log) - len, fmt, ap); + if (error != -1 && (size_t)len < sizeof(log)) { + (void)snprintf(log + len, sizeof(log) - len, ": %s.", + strerror(error)); + } + syslog(loglevel, "%s", log); + break; + } + default: + assert(!"Invalid mode."); + } + + errno = saved_errno; +} + +/* + * Regular logs. + */ +void +pjdlogv(int loglevel, const char *fmt, va_list ap) +{ + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + /* LOG_DEBUG is invalid here, pjdlogv?_debug() should be used. */ + assert(loglevel == LOG_EMERG || loglevel == LOG_ALERT || + loglevel == LOG_CRIT || loglevel == LOG_ERR || + loglevel == LOG_WARNING || loglevel == LOG_NOTICE || + loglevel == LOG_INFO); + + pjdlogv_common(loglevel, 0, -1, fmt, ap); +} + +/* + * Regular logs. + */ +void +pjdlog(int loglevel, const char *fmt, ...) +{ + va_list ap; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + va_start(ap, fmt); + pjdlogv(loglevel, fmt, ap); + va_end(ap); +} + +/* + * Debug logs. + */ +void +pjdlogv_debug(int debuglevel, const char *fmt, va_list ap) +{ + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + pjdlogv_common(LOG_DEBUG, debuglevel, -1, fmt, ap); +} + +/* + * Debug logs. + */ +void +pjdlog_debug(int debuglevel, const char *fmt, ...) +{ + va_list ap; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + va_start(ap, fmt); + pjdlogv_debug(debuglevel, fmt, ap); + va_end(ap); +} + +/* + * Error logs with errno logging. + */ +void +pjdlogv_errno(int loglevel, const char *fmt, va_list ap) +{ + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + pjdlogv_common(loglevel, 0, errno, fmt, ap); +} + +/* + * Error logs with errno logging. + */ +void +pjdlog_errno(int loglevel, const char *fmt, ...) +{ + va_list ap; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + va_start(ap, fmt); + pjdlogv_errno(loglevel, fmt, ap); + va_end(ap); +} + +/* + * Log error, errno and exit. + */ +void +pjdlogv_exit(int exitcode, const char *fmt, va_list ap) +{ + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + pjdlogv_errno(LOG_ERR, fmt, ap); + exit(exitcode); + /* NOTREACHED */ +} + +/* + * Log error, errno and exit. + */ +void +pjdlog_exit(int exitcode, const char *fmt, ...) +{ + va_list ap; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + va_start(ap, fmt); + pjdlogv_exit(exitcode, fmt, ap); + /* NOTREACHED */ + va_end(ap); +} + +/* + * Log error and exit. + */ +void +pjdlogv_exitx(int exitcode, const char *fmt, va_list ap) +{ + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + pjdlogv(LOG_ERR, fmt, ap); + exit(exitcode); + /* NOTREACHED */ +} + +/* + * Log error and exit. + */ +void +pjdlog_exitx(int exitcode, const char *fmt, ...) +{ + va_list ap; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + va_start(ap, fmt); + pjdlogv_exitx(exitcode, fmt, ap); + /* NOTREACHED */ + va_end(ap); +} + +/* + * Log failure message and exit. + */ +void +pjdlog_abort(const char *func, const char *file, int line, + const char *failedexpr, const char *fmt, ...) +{ + va_list ap; + + assert(pjdlog_initialized == PJDLOG_INITIALIZED); + + /* + * When there is no message we pass __func__ as 'fmt'. + * It would be cleaner to pass NULL or "", but gcc generates a warning + * for both of those. + */ + if (fmt != func) { + va_start(ap, fmt); + pjdlogv_critical(fmt, ap); + va_end(ap); + } + if (failedexpr == NULL) { + if (func == NULL) { + pjdlog_critical("Aborted at file %s, line %d.", file, + line); + } else { + pjdlog_critical("Aborted at function %s, file %s, line %d.", + func, file, line); + } + } else { + if (func == NULL) { + pjdlog_critical("Assertion failed: (%s), file %s, line %d.", + failedexpr, file, line); + } else { + pjdlog_critical("Assertion failed: (%s), function %s, file %s, line %d.", + failedexpr, func, file, line); + } + } + abort(); +} diff --git a/bin/auditdistd/pjdlog.h b/bin/auditdistd/pjdlog.h new file mode 100644 index 000000000000..0cb61217069c --- /dev/null +++ b/bin/auditdistd/pjdlog.h @@ -0,0 +1,119 @@ +/*- + * Copyright (c) 2009-2010 The FreeBSD Foundation + * Copyright (c) 2011 Pawel Jakub Dawidek <pjd@FreeBSD.org> + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/pjdlog.h#1 $ + */ + +#ifndef _PJDLOG_H_ +#define _PJDLOG_H_ + +#include <sys/cdefs.h> + +#include <stdarg.h> +#include <sysexits.h> +#include <syslog.h> + +#include <compat/compat.h> + +#define PJDLOG_MODE_STD 0 +#define PJDLOG_MODE_SYSLOG 1 + +void pjdlog_init(int mode); +void pjdlog_fini(void); + +void pjdlog_mode_set(int mode); +int pjdlog_mode_get(void); + +void pjdlog_debug_set(int level); +int pjdlog_debug_get(void); + +void pjdlog_prefix_set(const char *fmt, ...) __printflike(1, 2); +void pjdlogv_prefix_set(const char *fmt, va_list ap) __printflike(1, 0); + +void pjdlog_common(int loglevel, int debuglevel, int error, const char *fmt, + ...) __printflike(4, 5); +void pjdlogv_common(int loglevel, int debuglevel, int error, const char *fmt, + va_list ap) __printflike(4, 0); + +void pjdlog(int loglevel, const char *fmt, ...) __printflike(2, 3); +void pjdlogv(int loglevel, const char *fmt, va_list ap) __printflike(2, 0); + +#define pjdlogv_emergency(fmt, ap) pjdlogv(LOG_EMERG, (fmt), (ap)) +#define pjdlog_emergency(...) pjdlog(LOG_EMERG, __VA_ARGS__) +#define pjdlogv_alert(fmt, ap) pjdlogv(LOG_ALERT, (fmt), (ap)) +#define pjdlog_alert(...) pjdlog(LOG_ALERT, __VA_ARGS__) +#define pjdlogv_critical(fmt, ap) pjdlogv(LOG_CRIT, (fmt), (ap)) +#define pjdlog_critical(...) pjdlog(LOG_CRIT, __VA_ARGS__) +#define pjdlogv_error(fmt, ap) pjdlogv(LOG_ERR, (fmt), (ap)) +#define pjdlog_error(...) pjdlog(LOG_ERR, __VA_ARGS__) +#define pjdlogv_warning(fmt, ap) pjdlogv(LOG_WARNING, (fmt), (ap)) +#define pjdlog_warning(...) pjdlog(LOG_WARNING, __VA_ARGS__) +#define pjdlogv_notice(fmt, ap) pjdlogv(LOG_NOTICE, (fmt), (ap)) +#define pjdlog_notice(...) pjdlog(LOG_NOTICE, __VA_ARGS__) +#define pjdlogv_info(fmt, ap) pjdlogv(LOG_INFO, (fmt), (ap)) +#define pjdlog_info(...) pjdlog(LOG_INFO, __VA_ARGS__) + +void pjdlog_debug(int debuglevel, const char *fmt, ...) __printflike(2, 3); +void pjdlogv_debug(int debuglevel, const char *fmt, va_list ap) __printflike(2, 0); + +void pjdlog_errno(int loglevel, const char *fmt, ...) __printflike(2, 3); +void pjdlogv_errno(int loglevel, const char *fmt, va_list ap) __printflike(2, 0); + +void pjdlog_exit(int exitcode, const char *fmt, ...) __printflike(2, 3) __dead2; +void pjdlogv_exit(int exitcode, const char *fmt, va_list ap) __printflike(2, 0) __dead2; + +void pjdlog_exitx(int exitcode, const char *fmt, ...) __printflike(2, 3) __dead2; +void pjdlogv_exitx(int exitcode, const char *fmt, va_list ap) __printflike(2, 0) __dead2; + +void pjdlog_abort(const char *func, const char *file, int line, + const char *failedexpr, const char *fmt, ...) __printflike(5, 6) __dead2; + +#define PJDLOG_VERIFY(expr) do { \ + if (!(expr)) { \ + pjdlog_abort(__func__, __FILE__, __LINE__, #expr, \ + "%s", __func__); \ + } \ +} while (0) +#define PJDLOG_RVERIFY(expr, ...) do { \ + if (!(expr)) { \ + pjdlog_abort(__func__, __FILE__, __LINE__, #expr, \ + __VA_ARGS__); \ + } \ +} while (0) +#define PJDLOG_ABORT(...) pjdlog_abort(__func__, __FILE__, \ + __LINE__, NULL, __VA_ARGS__) +#ifdef NDEBUG +#define PJDLOG_ASSERT(expr) do { } while (0) +#define PJDLOG_RASSERT(...) do { } while (0) +#else +#define PJDLOG_ASSERT(expr) PJDLOG_VERIFY(expr) +#define PJDLOG_RASSERT(...) PJDLOG_RVERIFY(__VA_ARGS__) +#endif + +#endif /* !_PJDLOG_H_ */ diff --git a/bin/auditdistd/proto.c b/bin/auditdistd/proto.c new file mode 100644 index 000000000000..25daf0ccb0db --- /dev/null +++ b/bin/auditdistd/proto.c @@ -0,0 +1,529 @@ +/*- + * Copyright (c) 2009-2010 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/proto.c#1 $ + */ + +#include <sys/types.h> +#include <sys/queue.h> +#include <sys/socket.h> + +#include <errno.h> +#include <stdint.h> +#include <string.h> +#include <strings.h> + +#include "pjdlog.h" +#include "proto.h" +#include "proto_impl.h" + +#define PROTO_CONN_MAGIC 0x907041c +struct proto_conn { + int pc_magic; + struct proto *pc_proto; + void *pc_ctx; + int pc_side; +#define PROTO_SIDE_CLIENT 0 +#define PROTO_SIDE_SERVER_LISTEN 1 +#define PROTO_SIDE_SERVER_WORK 2 +}; + +static TAILQ_HEAD(, proto) protos = TAILQ_HEAD_INITIALIZER(protos); + +void +proto_register(struct proto *proto, bool isdefault) +{ + static bool seen_default = false; + + if (!isdefault) + TAILQ_INSERT_HEAD(&protos, proto, prt_next); + else { + PJDLOG_ASSERT(!seen_default); + seen_default = true; + TAILQ_INSERT_TAIL(&protos, proto, prt_next); + } +} + +static struct proto_conn * +proto_alloc(struct proto *proto, int side) +{ + struct proto_conn *conn; + + PJDLOG_ASSERT(proto != NULL); + PJDLOG_ASSERT(side == PROTO_SIDE_CLIENT || + side == PROTO_SIDE_SERVER_LISTEN || + side == PROTO_SIDE_SERVER_WORK); + + conn = malloc(sizeof(*conn)); + if (conn != NULL) { + conn->pc_proto = proto; + conn->pc_side = side; + conn->pc_magic = PROTO_CONN_MAGIC; + } + return (conn); +} + +static void +proto_free(struct proto_conn *conn) +{ + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_side == PROTO_SIDE_CLIENT || + conn->pc_side == PROTO_SIDE_SERVER_LISTEN || + conn->pc_side == PROTO_SIDE_SERVER_WORK); + PJDLOG_ASSERT(conn->pc_proto != NULL); + + bzero(conn, sizeof(*conn)); + free(conn); +} + +static int +proto_common_setup(const char *srcaddr, const char *dstaddr, int timeout, + int side, struct proto_conn **connp) +{ + struct proto *proto; + struct proto_conn *conn; + void *ctx; + int ret; + + PJDLOG_ASSERT(side == PROTO_SIDE_CLIENT || + side == PROTO_SIDE_SERVER_LISTEN); + + TAILQ_FOREACH(proto, &protos, prt_next) { + if (side == PROTO_SIDE_CLIENT) { + if (proto->prt_connect == NULL) { + ret = -1; + } else { + ret = proto->prt_connect(srcaddr, dstaddr, + timeout, &ctx); + } + } else /* if (side == PROTO_SIDE_SERVER_LISTEN) */ { + if (proto->prt_server == NULL) + ret = -1; + else + ret = proto->prt_server(dstaddr, &ctx); + } + /* + * ret == 0 - success + * ret == -1 - dstaddr is not for this protocol + * ret > 0 - right protocol, but an error occured + */ + if (ret >= 0) + break; + } + if (proto == NULL) { + /* Unrecognized address. */ + errno = EINVAL; + return (-1); + } + if (ret > 0) { + /* An error occured. */ + errno = ret; + return (-1); + } + conn = proto_alloc(proto, side); + if (conn == NULL) { + if (proto->prt_close != NULL) + proto->prt_close(ctx); + errno = ENOMEM; + return (-1); + } + conn->pc_ctx = ctx; + *connp = conn; + + return (0); +} + +int +proto_connect(const char *srcaddr, const char *dstaddr, int timeout, + struct proto_conn **connp) +{ + + PJDLOG_ASSERT(srcaddr == NULL || srcaddr[0] != '\0'); + PJDLOG_ASSERT(dstaddr != NULL); + PJDLOG_ASSERT(timeout >= -1); + + return (proto_common_setup(srcaddr, dstaddr, timeout, + PROTO_SIDE_CLIENT, connp)); +} + +int +proto_connect_wait(struct proto_conn *conn, int timeout) +{ + int error; + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_side == PROTO_SIDE_CLIENT); + PJDLOG_ASSERT(conn->pc_proto != NULL); + PJDLOG_ASSERT(conn->pc_proto->prt_connect_wait != NULL); + PJDLOG_ASSERT(timeout >= 0); + + error = conn->pc_proto->prt_connect_wait(conn->pc_ctx, timeout); + if (error != 0) { + errno = error; + return (-1); + } + + return (0); +} + +int +proto_server(const char *addr, struct proto_conn **connp) +{ + + PJDLOG_ASSERT(addr != NULL); + + return (proto_common_setup(NULL, addr, -1, PROTO_SIDE_SERVER_LISTEN, + connp)); +} + +int +proto_accept(struct proto_conn *conn, struct proto_conn **newconnp) +{ + struct proto_conn *newconn; + int error; + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_side == PROTO_SIDE_SERVER_LISTEN); + PJDLOG_ASSERT(conn->pc_proto != NULL); + PJDLOG_ASSERT(conn->pc_proto->prt_accept != NULL); + + newconn = proto_alloc(conn->pc_proto, PROTO_SIDE_SERVER_WORK); + if (newconn == NULL) + return (-1); + + error = conn->pc_proto->prt_accept(conn->pc_ctx, &newconn->pc_ctx); + if (error != 0) { + proto_free(newconn); + errno = error; + return (-1); + } + + *newconnp = newconn; + + return (0); +} + +int +proto_send(const struct proto_conn *conn, const void *data, size_t size) +{ + int error; + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_proto != NULL); + PJDLOG_ASSERT(conn->pc_proto->prt_send != NULL); + + error = conn->pc_proto->prt_send(conn->pc_ctx, data, size, -1); + if (error != 0) { + errno = error; + return (-1); + } + return (0); +} + +int +proto_recv(const struct proto_conn *conn, void *data, size_t size) +{ + int error; + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_proto != NULL); + PJDLOG_ASSERT(conn->pc_proto->prt_recv != NULL); + + error = conn->pc_proto->prt_recv(conn->pc_ctx, data, size, NULL); + if (error != 0) { + errno = error; + return (-1); + } + return (0); +} + +int +proto_connection_send(const struct proto_conn *conn, struct proto_conn *mconn) +{ + const char *protoname; + int error, fd; + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_proto != NULL); + PJDLOG_ASSERT(conn->pc_proto->prt_send != NULL); + PJDLOG_ASSERT(mconn != NULL); + PJDLOG_ASSERT(mconn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(mconn->pc_proto != NULL); + fd = proto_descriptor(mconn); + PJDLOG_ASSERT(fd >= 0); + protoname = mconn->pc_proto->prt_name; + PJDLOG_ASSERT(protoname != NULL); + + error = conn->pc_proto->prt_send(conn->pc_ctx, + (const unsigned char *)protoname, strlen(protoname) + 1, fd); + proto_close(mconn); + if (error != 0) { + errno = error; + return (-1); + } + return (0); +} + +int +proto_wrap(const char *protoname, bool client, int fd, + struct proto_conn **newconnp) +{ + struct proto *proto; + struct proto_conn *newconn; + int error; + + TAILQ_FOREACH(proto, &protos, prt_next) { + if (strcmp(proto->prt_name, protoname) == 0) + break; + } + if (proto == NULL) { + errno = EINVAL; + return (-1); + } + + newconn = proto_alloc(proto, + client ? PROTO_SIDE_CLIENT : PROTO_SIDE_SERVER_WORK); + if (newconn == NULL) + return (-1); + PJDLOG_ASSERT(newconn->pc_proto->prt_wrap != NULL); + error = newconn->pc_proto->prt_wrap(fd, client, &newconn->pc_ctx); + if (error != 0) { + proto_free(newconn); + errno = error; + return (-1); + } + + *newconnp = newconn; + + return (0); +} + +int +proto_connection_recv(const struct proto_conn *conn, bool client, + struct proto_conn **newconnp) +{ + char protoname[128]; + int error, fd; + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_proto != NULL); + PJDLOG_ASSERT(conn->pc_proto->prt_recv != NULL); + PJDLOG_ASSERT(newconnp != NULL); + + bzero(protoname, sizeof(protoname)); + + error = conn->pc_proto->prt_recv(conn->pc_ctx, + (unsigned char *)protoname, sizeof(protoname) - 1, &fd); + if (error != 0) { + errno = error; + return (-1); + } + + PJDLOG_ASSERT(fd >= 0); + + return (proto_wrap(protoname, client, fd, newconnp)); +} + +int +proto_descriptor(const struct proto_conn *conn) +{ + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_proto != NULL); + PJDLOG_ASSERT(conn->pc_proto->prt_descriptor != NULL); + + return (conn->pc_proto->prt_descriptor(conn->pc_ctx)); +} + +bool +proto_address_match(const struct proto_conn *conn, const char *addr) +{ + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_proto != NULL); + PJDLOG_ASSERT(conn->pc_proto->prt_address_match != NULL); + + return (conn->pc_proto->prt_address_match(conn->pc_ctx, addr)); +} + +void +proto_local_address(const struct proto_conn *conn, char *addr, size_t size) +{ + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_proto != NULL); + PJDLOG_ASSERT(conn->pc_proto->prt_local_address != NULL); + + conn->pc_proto->prt_local_address(conn->pc_ctx, addr, size); +} + +void +proto_remote_address(const struct proto_conn *conn, char *addr, size_t size) +{ + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_proto != NULL); + PJDLOG_ASSERT(conn->pc_proto->prt_remote_address != NULL); + + conn->pc_proto->prt_remote_address(conn->pc_ctx, addr, size); +} + +int +proto_timeout(const struct proto_conn *conn, int timeout) +{ + struct timeval tv; + int fd; + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_proto != NULL); + + fd = proto_descriptor(conn); + if (fd < 0) + return (-1); + + tv.tv_sec = timeout; + tv.tv_usec = 0; + if (setsockopt(fd, SOL_SOCKET, SO_SNDTIMEO, &tv, sizeof(tv)) < 0) + return (-1); + if (setsockopt(fd, SOL_SOCKET, SO_RCVTIMEO, &tv, sizeof(tv)) < 0) + return (-1); + + return (0); +} + +void +proto_close(struct proto_conn *conn) +{ + + PJDLOG_ASSERT(conn != NULL); + PJDLOG_ASSERT(conn->pc_magic == PROTO_CONN_MAGIC); + PJDLOG_ASSERT(conn->pc_proto != NULL); + PJDLOG_ASSERT(conn->pc_proto->prt_close != NULL); + + conn->pc_proto->prt_close(conn->pc_ctx); + proto_free(conn); +} + +int +proto_exec(int argc, char *argv[]) +{ + struct proto *proto; + int error; + + if (argc == 0) { + errno = EINVAL; + return (-1); + } + TAILQ_FOREACH(proto, &protos, prt_next) { + if (strcmp(proto->prt_name, argv[0]) == 0) + break; + } + if (proto == NULL) { + errno = EINVAL; + return (-1); + } + if (proto->prt_exec == NULL) { + errno = EOPNOTSUPP; + return (-1); + } + error = proto->prt_exec(argc, argv); + if (error != 0) { + errno = error; + return (-1); + } + /* NOTREACHED */ + return (0); +} + +struct proto_nvpair { + char *pnv_name; + char *pnv_value; + TAILQ_ENTRY(proto_nvpair) pnv_next; +}; + +static TAILQ_HEAD(, proto_nvpair) proto_nvpairs = + TAILQ_HEAD_INITIALIZER(proto_nvpairs); + +int +proto_set(const char *name, const char *value) +{ + struct proto_nvpair *pnv; + + TAILQ_FOREACH(pnv, &proto_nvpairs, pnv_next) { + if (strcmp(pnv->pnv_name, name) == 0) + break; + } + if (pnv != NULL) { + TAILQ_REMOVE(&proto_nvpairs, pnv, pnv_next); + free(pnv->pnv_value); + } else { + pnv = malloc(sizeof(*pnv)); + if (pnv == NULL) + return (-1); + pnv->pnv_name = strdup(name); + if (pnv->pnv_name == NULL) { + free(pnv); + return (-1); + } + } + pnv->pnv_value = strdup(value); + if (pnv->pnv_value == NULL) { + free(pnv->pnv_name); + free(pnv); + return (-1); + } + TAILQ_INSERT_TAIL(&proto_nvpairs, pnv, pnv_next); + return (0); +} + +const char * +proto_get(const char *name) +{ + struct proto_nvpair *pnv; + + TAILQ_FOREACH(pnv, &proto_nvpairs, pnv_next) { + if (strcmp(pnv->pnv_name, name) == 0) + break; + } + if (pnv != NULL) + return (pnv->pnv_value); + return (NULL); +} diff --git a/bin/auditdistd/proto.h b/bin/auditdistd/proto.h new file mode 100644 index 000000000000..79047b0bc80f --- /dev/null +++ b/bin/auditdistd/proto.h @@ -0,0 +1,63 @@ +/*- + * Copyright (c) 2009-2010 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/proto.h#1 $ + */ + +#ifndef _PROTO_H_ +#define _PROTO_H_ + +#include <stdbool.h> /* bool */ +#include <stdlib.h> /* size_t */ + +struct proto_conn; + +int proto_connect(const char *srcaddr, const char *dstaddr, int timeout, + struct proto_conn **connp); +int proto_connect_wait(struct proto_conn *conn, int timeout); +int proto_server(const char *addr, struct proto_conn **connp); +int proto_accept(struct proto_conn *conn, struct proto_conn **newconnp); +int proto_send(const struct proto_conn *conn, const void *data, size_t size); +int proto_recv(const struct proto_conn *conn, void *data, size_t size); +int proto_connection_send(const struct proto_conn *conn, + struct proto_conn *mconn); +int proto_connection_recv(const struct proto_conn *conn, bool client, + struct proto_conn **newconnp); +int proto_descriptor(const struct proto_conn *conn); +bool proto_address_match(const struct proto_conn *conn, const char *addr); +void proto_local_address(const struct proto_conn *conn, char *addr, + size_t size); +void proto_remote_address(const struct proto_conn *conn, char *addr, + size_t size); +int proto_timeout(const struct proto_conn *conn, int timeout); +void proto_close(struct proto_conn *conn); +int proto_exec(int argc, char *argv[]); +int proto_set(const char *name, const char *value); +const char *proto_get(const char *name); + +#endif /* !_PROTO_H_ */ diff --git a/bin/auditdistd/proto_common.c b/bin/auditdistd/proto_common.c new file mode 100644 index 000000000000..0fa4d3c5443b --- /dev/null +++ b/bin/auditdistd/proto_common.c @@ -0,0 +1,233 @@ +/*- + * Copyright (c) 2009-2010 The FreeBSD Foundation + * Copyright (c) 2011 Pawel Jakub Dawidek <pawel@dawidek.net> + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/proto_common.c#1 $ + */ + +#include <sys/types.h> +#include <sys/socket.h> + +#include <errno.h> +#include <fcntl.h> +#include <stdbool.h> +#include <stdlib.h> +#include <strings.h> +#include <unistd.h> + +#include <compat/compat.h> + +#include "pjdlog.h" +#include "proto_impl.h" + +/* Maximum size of packet we want to use when sending data. */ +#ifndef MAX_SEND_SIZE +#define MAX_SEND_SIZE 32768 +#endif + +static bool +blocking_socket(int sock) +{ + int flags; + + flags = fcntl(sock, F_GETFL); + PJDLOG_ASSERT(flags >= 0); + return ((flags & O_NONBLOCK) == 0); +} + +static int +proto_descriptor_send(int sock, int fd) +{ + unsigned char ctrl[CMSG_SPACE(sizeof(fd))]; + struct msghdr msg; + struct cmsghdr *cmsg; + + PJDLOG_ASSERT(sock >= 0); + PJDLOG_ASSERT(fd >= 0); + + bzero(&msg, sizeof(msg)); + bzero(&ctrl, sizeof(ctrl)); + + msg.msg_iov = NULL; + msg.msg_iovlen = 0; + msg.msg_control = ctrl; + msg.msg_controllen = sizeof(ctrl); + + cmsg = CMSG_FIRSTHDR(&msg); + cmsg->cmsg_level = SOL_SOCKET; + cmsg->cmsg_type = SCM_RIGHTS; + cmsg->cmsg_len = CMSG_LEN(sizeof(fd)); + bcopy(&fd, CMSG_DATA(cmsg), sizeof(fd)); + + if (sendmsg(sock, &msg, 0) == -1) + return (errno); + + return (0); +} + +int +proto_common_send(int sock, const unsigned char *data, size_t size, int fd) +{ + ssize_t done; + size_t sendsize; + int errcount = 0; + + PJDLOG_ASSERT(sock >= 0); + + if (data == NULL) { + /* The caller is just trying to decide about direction. */ + + PJDLOG_ASSERT(size == 0); + + if (shutdown(sock, SHUT_RD) == -1) + return (errno); + return (0); + } + + PJDLOG_ASSERT(data != NULL); + PJDLOG_ASSERT(size > 0); + + do { + sendsize = size < MAX_SEND_SIZE ? size : MAX_SEND_SIZE; + done = send(sock, data, sendsize, MSG_NOSIGNAL); + if (done == 0) { + return (ENOTCONN); + } else if (done < 0) { + if (errno == EINTR) + continue; + if (errno == ENOBUFS) { + /* + * If there are no buffers we retry. + * After each try we increase delay before the + * next one and we give up after fifteen times. + * This gives 11s of total wait time. + */ + if (errcount == 15) { + pjdlog_warning("Getting ENOBUFS errors for 11s on send(), giving up."); + } else { + if (errcount == 0) + pjdlog_warning("Got ENOBUFS error on send(), retrying for a bit."); + errcount++; + usleep(100000 * errcount); + continue; + } + } + /* + * If this is blocking socket and we got EAGAIN, this + * means the request timed out. Translate errno to + * ETIMEDOUT, to give administrator a hint to + * eventually increase timeout. + */ + if (errno == EAGAIN && blocking_socket(sock)) + errno = ETIMEDOUT; + return (errno); + } + data += done; + size -= done; + } while (size > 0); + if (errcount > 0) { + pjdlog_info("Data sent successfully after %d ENOBUFS error%s.", + errcount, errcount == 1 ? "" : "s"); + } + + if (fd == -1) + return (0); + return (proto_descriptor_send(sock, fd)); +} + +static int +proto_descriptor_recv(int sock, int *fdp) +{ + unsigned char ctrl[CMSG_SPACE(sizeof(*fdp))]; + struct msghdr msg; + struct cmsghdr *cmsg; + + PJDLOG_ASSERT(sock >= 0); + PJDLOG_ASSERT(fdp != NULL); + + bzero(&msg, sizeof(msg)); + bzero(&ctrl, sizeof(ctrl)); + + msg.msg_iov = NULL; + msg.msg_iovlen = 0; + msg.msg_control = ctrl; + msg.msg_controllen = sizeof(ctrl); + + if (recvmsg(sock, &msg, 0) == -1) + return (errno); + + cmsg = CMSG_FIRSTHDR(&msg); + if (cmsg->cmsg_level != SOL_SOCKET || + cmsg->cmsg_type != SCM_RIGHTS) { + return (EINVAL); + } + bcopy(CMSG_DATA(cmsg), fdp, sizeof(*fdp)); + + return (0); +} + +int +proto_common_recv(int sock, unsigned char *data, size_t size, int *fdp) +{ + ssize_t done; + + PJDLOG_ASSERT(sock >= 0); + + if (data == NULL) { + /* The caller is just trying to decide about direction. */ + + PJDLOG_ASSERT(size == 0); + + if (shutdown(sock, SHUT_WR) == -1) + return (errno); + return (0); + } + + PJDLOG_ASSERT(data != NULL); + PJDLOG_ASSERT(size > 0); + + do { + done = recv(sock, data, size, MSG_WAITALL); + } while (done == -1 && errno == EINTR); + if (done == 0) { + return (ENOTCONN); + } else if (done < 0) { + /* + * If this is blocking socket and we got EAGAIN, this + * means the request timed out. Translate errno to + * ETIMEDOUT, to give administrator a hint to + * eventually increase timeout. + */ + if (errno == EAGAIN && blocking_socket(sock)) + errno = ETIMEDOUT; + return (errno); + } + if (fdp == NULL) + return (0); + return (proto_descriptor_recv(sock, fdp)); +} diff --git a/bin/auditdistd/proto_impl.h b/bin/auditdistd/proto_impl.h new file mode 100644 index 000000000000..c2ce2d91e9e2 --- /dev/null +++ b/bin/auditdistd/proto_impl.h @@ -0,0 +1,84 @@ +/*- + * Copyright (c) 2009-2010 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/proto_impl.h#1 $ + */ + +#ifndef _PROTO_IMPL_H_ +#define _PROTO_IMPL_H_ + +#include <sys/queue.h> + +#include <stdbool.h> /* bool */ +#include <stdlib.h> /* size_t */ + +#define __constructor __attribute__((constructor)) + +struct proto_conn; + +typedef int prt_connect_t(const char *, const char *, int, void **); +typedef int prt_connect_wait_t(void *, int); +typedef int prt_server_t(const char *, void **); +typedef int prt_accept_t(void *, void **); +typedef int prt_wrap_t(int, bool, void **); +typedef int prt_send_t(void *, const unsigned char *, size_t, int); +typedef int prt_recv_t(void *, unsigned char *, size_t, int *); +typedef int prt_descriptor_t(const void *); +typedef bool prt_address_match_t(const void *, const char *); +typedef void prt_local_address_t(const void *, char *, size_t); +typedef void prt_remote_address_t(const void *, char *, size_t); +typedef void prt_close_t(void *); +typedef int prt_exec_t(int, char *[]); + +struct proto { + const char *prt_name; + prt_connect_t *prt_connect; + prt_connect_wait_t *prt_connect_wait; + prt_server_t *prt_server; + prt_accept_t *prt_accept; + prt_wrap_t *prt_wrap; + prt_send_t *prt_send; + prt_recv_t *prt_recv; + prt_descriptor_t *prt_descriptor; + prt_address_match_t *prt_address_match; + prt_local_address_t *prt_local_address; + prt_remote_address_t *prt_remote_address; + prt_close_t *prt_close; + prt_exec_t *prt_exec; + TAILQ_ENTRY(proto) prt_next; +}; + +void proto_register(struct proto *proto, bool isdefault); + +int proto_wrap(const char *protoname, bool client, int fd, + struct proto_conn **newconnp); + +int proto_common_send(int sock, const unsigned char *data, size_t size, int fd); +int proto_common_recv(int sock, unsigned char *data, size_t size, int *fdp); + +#endif /* !_PROTO_IMPL_H_ */ diff --git a/bin/auditdistd/proto_socketpair.c b/bin/auditdistd/proto_socketpair.c new file mode 100644 index 000000000000..8d04c49217e2 --- /dev/null +++ b/bin/auditdistd/proto_socketpair.c @@ -0,0 +1,266 @@ +/*- + * Copyright (c) 2009-2010 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/proto_socketpair.c#1 $ + */ + +#include <sys/types.h> +#include <sys/socket.h> + +#include <errno.h> +#include <stdbool.h> +#include <stdint.h> +#include <stdio.h> +#include <string.h> +#include <unistd.h> + +#include "pjdlog.h" +#include "proto_impl.h" + +#define SP_CTX_MAGIC 0x50c3741 +struct sp_ctx { + int sp_magic; + int sp_fd[2]; + int sp_side; +#define SP_SIDE_UNDEF 0 +#define SP_SIDE_CLIENT 1 +#define SP_SIDE_SERVER 2 +}; + +static void sp_close(void *ctx); + +static int +sp_connect(const char *srcaddr, const char *dstaddr, int timeout, void **ctxp) +{ + struct sp_ctx *spctx; + int error; + + PJDLOG_ASSERT(dstaddr != NULL); + PJDLOG_ASSERT(timeout >= -1); + + if (strcmp(dstaddr, "socketpair://") != 0) + return (-1); + + PJDLOG_ASSERT(srcaddr == NULL); + + spctx = malloc(sizeof(*spctx)); + if (spctx == NULL) + return (errno); + + if (socketpair(PF_UNIX, SOCK_STREAM, 0, spctx->sp_fd) == -1) { + error = errno; + free(spctx); + return (error); + } + + spctx->sp_side = SP_SIDE_UNDEF; + spctx->sp_magic = SP_CTX_MAGIC; + *ctxp = spctx; + + return (0); +} + +static int +sp_wrap(int fd, bool client, void **ctxp) +{ + struct sp_ctx *spctx; + + PJDLOG_ASSERT(fd >= 0); + + spctx = malloc(sizeof(*spctx)); + if (spctx == NULL) + return (errno); + + if (client) { + spctx->sp_side = SP_SIDE_CLIENT; + spctx->sp_fd[0] = fd; + spctx->sp_fd[1] = -1; + } else { + spctx->sp_side = SP_SIDE_SERVER; + spctx->sp_fd[0] = -1; + spctx->sp_fd[1] = fd; + } + spctx->sp_magic = SP_CTX_MAGIC; + *ctxp = spctx; + + return (0); +} + +static int +sp_send(void *ctx, const unsigned char *data, size_t size, int fd) +{ + struct sp_ctx *spctx = ctx; + int sock; + + PJDLOG_ASSERT(spctx != NULL); + PJDLOG_ASSERT(spctx->sp_magic == SP_CTX_MAGIC); + + switch (spctx->sp_side) { + case SP_SIDE_UNDEF: + /* + * If the first operation done by the caller is proto_send(), + * we assume this is the client. + */ + /* FALLTHROUGH */ + spctx->sp_side = SP_SIDE_CLIENT; + /* Close other end. */ + close(spctx->sp_fd[1]); + spctx->sp_fd[1] = -1; + case SP_SIDE_CLIENT: + PJDLOG_ASSERT(spctx->sp_fd[0] >= 0); + sock = spctx->sp_fd[0]; + break; + case SP_SIDE_SERVER: + PJDLOG_ASSERT(spctx->sp_fd[1] >= 0); + sock = spctx->sp_fd[1]; + break; + default: + PJDLOG_ABORT("Invalid socket side (%d).", spctx->sp_side); + } + + /* Someone is just trying to decide about side. */ + if (data == NULL) + return (0); + + return (proto_common_send(sock, data, size, fd)); +} + +static int +sp_recv(void *ctx, unsigned char *data, size_t size, int *fdp) +{ + struct sp_ctx *spctx = ctx; + int sock; + + PJDLOG_ASSERT(spctx != NULL); + PJDLOG_ASSERT(spctx->sp_magic == SP_CTX_MAGIC); + + switch (spctx->sp_side) { + case SP_SIDE_UNDEF: + /* + * If the first operation done by the caller is proto_recv(), + * we assume this is the server. + */ + /* FALLTHROUGH */ + spctx->sp_side = SP_SIDE_SERVER; + /* Close other end. */ + close(spctx->sp_fd[0]); + spctx->sp_fd[0] = -1; + case SP_SIDE_SERVER: + PJDLOG_ASSERT(spctx->sp_fd[1] >= 0); + sock = spctx->sp_fd[1]; + break; + case SP_SIDE_CLIENT: + PJDLOG_ASSERT(spctx->sp_fd[0] >= 0); + sock = spctx->sp_fd[0]; + break; + default: + PJDLOG_ABORT("Invalid socket side (%d).", spctx->sp_side); + } + + /* Someone is just trying to decide about side. */ + if (data == NULL) + return (0); + + return (proto_common_recv(sock, data, size, fdp)); +} + +static int +sp_descriptor(const void *ctx) +{ + const struct sp_ctx *spctx = ctx; + + PJDLOG_ASSERT(spctx != NULL); + PJDLOG_ASSERT(spctx->sp_magic == SP_CTX_MAGIC); + PJDLOG_ASSERT(spctx->sp_side == SP_SIDE_CLIENT || + spctx->sp_side == SP_SIDE_SERVER); + + switch (spctx->sp_side) { + case SP_SIDE_CLIENT: + PJDLOG_ASSERT(spctx->sp_fd[0] >= 0); + return (spctx->sp_fd[0]); + case SP_SIDE_SERVER: + PJDLOG_ASSERT(spctx->sp_fd[1] >= 0); + return (spctx->sp_fd[1]); + } + + PJDLOG_ABORT("Invalid socket side (%d).", spctx->sp_side); +} + +static void +sp_close(void *ctx) +{ + struct sp_ctx *spctx = ctx; + + PJDLOG_ASSERT(spctx != NULL); + PJDLOG_ASSERT(spctx->sp_magic == SP_CTX_MAGIC); + + switch (spctx->sp_side) { + case SP_SIDE_UNDEF: + PJDLOG_ASSERT(spctx->sp_fd[0] >= 0); + close(spctx->sp_fd[0]); + spctx->sp_fd[0] = -1; + PJDLOG_ASSERT(spctx->sp_fd[1] >= 0); + close(spctx->sp_fd[1]); + spctx->sp_fd[1] = -1; + break; + case SP_SIDE_CLIENT: + PJDLOG_ASSERT(spctx->sp_fd[0] >= 0); + close(spctx->sp_fd[0]); + spctx->sp_fd[0] = -1; + PJDLOG_ASSERT(spctx->sp_fd[1] == -1); + break; + case SP_SIDE_SERVER: + PJDLOG_ASSERT(spctx->sp_fd[1] >= 0); + close(spctx->sp_fd[1]); + spctx->sp_fd[1] = -1; + PJDLOG_ASSERT(spctx->sp_fd[0] == -1); + break; + default: + PJDLOG_ABORT("Invalid socket side (%d).", spctx->sp_side); + } + + spctx->sp_magic = 0; + free(spctx); +} + +static struct proto sp_proto = { + .prt_name = "socketpair", + .prt_connect = sp_connect, + .prt_wrap = sp_wrap, + .prt_send = sp_send, + .prt_recv = sp_recv, + .prt_descriptor = sp_descriptor, + .prt_close = sp_close +}; + +static __constructor void +sp_ctor(void) +{ + + proto_register(&sp_proto, false); +} diff --git a/bin/auditdistd/proto_tcp.c b/bin/auditdistd/proto_tcp.c new file mode 100644 index 000000000000..b0fb4e0732c3 --- /dev/null +++ b/bin/auditdistd/proto_tcp.c @@ -0,0 +1,725 @@ +/*- + * Copyright (c) 2009-2010 The FreeBSD Foundation + * Copyright (c) 2011 Pawel Jakub Dawidek <pawel@dawidek.net> + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/proto_tcp.c#1 $ + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <sys/param.h> /* MAXHOSTNAMELEN */ +#include <sys/socket.h> + +#include <arpa/inet.h> + +#include <netinet/in.h> +#include <netinet/tcp.h> + +#include <errno.h> +#include <fcntl.h> +#include <netdb.h> +#include <stdbool.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +#ifndef HAVE_STRLCPY +#include <compat/strlcpy.h> +#endif + +#include "pjdlog.h" +#include "proto_impl.h" +#include "subr.h" + +#define TCP_CTX_MAGIC 0x7c41c +struct tcp_ctx { + int tc_magic; + struct sockaddr_storage tc_sa; + int tc_fd; + int tc_side; +#define TCP_SIDE_CLIENT 0 +#define TCP_SIDE_SERVER_LISTEN 1 +#define TCP_SIDE_SERVER_WORK 2 + bool tc_wait_called; +}; + +static int tcp_connect_wait(void *ctx, int timeout); +static void tcp_close(void *ctx); + +/* + * Function converts the given string to unsigned number. + */ +static int +numfromstr(const char *str, intmax_t minnum, intmax_t maxnum, intmax_t *nump) +{ + intmax_t digit, num; + + if (str[0] == '\0') + goto invalid; /* Empty string. */ + num = 0; + for (; *str != '\0'; str++) { + if (*str < '0' || *str > '9') + goto invalid; /* Non-digit character. */ + digit = *str - '0'; + if (num > num * 10 + digit) + goto invalid; /* Overflow. */ + num = num * 10 + digit; + if (num > maxnum) + goto invalid; /* Too big. */ + } + if (num < minnum) + goto invalid; /* Too small. */ + *nump = num; + return (0); +invalid: + errno = EINVAL; + return (-1); +} + +static int +tcp_addr(const char *addr, int defport, struct sockaddr_storage *sap) +{ + char iporhost[MAXHOSTNAMELEN], portstr[6]; + struct addrinfo hints; + struct addrinfo *res; + const char *pp; + intmax_t port; + size_t size; + int error; + + if (addr == NULL) + return (-1); + + bzero(&hints, sizeof(hints)); + hints.ai_flags = AI_ADDRCONFIG | AI_NUMERICSERV; + hints.ai_family = PF_UNSPEC; + hints.ai_socktype = SOCK_STREAM; + hints.ai_protocol = IPPROTO_TCP; + + if (strncasecmp(addr, "tcp4://", 7) == 0) { + addr += 7; + hints.ai_family = PF_INET; + } else if (strncasecmp(addr, "tcp6://", 7) == 0) { + addr += 7; + hints.ai_family = PF_INET6; + } else if (strncasecmp(addr, "tcp://", 6) == 0) { + addr += 6; + } else { + /* + * Because TCP is the default assume IP or host is given without + * prefix. + */ + } + + /* + * Extract optional port. + * There are three cases to consider. + * 1. hostname with port, eg. freefall.freebsd.org:8457 + * 2. IPv4 address with port, eg. 192.168.0.101:8457 + * 3. IPv6 address with port, eg. [fe80::1]:8457 + * We discover IPv6 address by checking for two colons and if port is + * given, the address has to start with [. + */ + pp = NULL; + if (strchr(addr, ':') != strrchr(addr, ':')) { + if (addr[0] == '[') + pp = strrchr(addr, ':'); + } else { + pp = strrchr(addr, ':'); + } + if (pp == NULL) { + /* Port not given, use the default. */ + port = defport; + } else { + if (numfromstr(pp + 1, 1, 65535, &port) < 0) + return (errno); + } + (void)snprintf(portstr, sizeof(portstr), "%jd", (intmax_t)port); + /* Extract host name or IP address. */ + if (pp == NULL) { + size = sizeof(iporhost); + if (strlcpy(iporhost, addr, size) >= size) + return (ENAMETOOLONG); + } else if (addr[0] == '[' && pp[-1] == ']') { + size = (size_t)(pp - addr - 2 + 1); + if (size > sizeof(iporhost)) + return (ENAMETOOLONG); + (void)strlcpy(iporhost, addr + 1, size); + } else { + size = (size_t)(pp - addr + 1); + if (size > sizeof(iporhost)) + return (ENAMETOOLONG); + (void)strlcpy(iporhost, addr, size); + } + + error = getaddrinfo(iporhost, portstr, &hints, &res); + if (error != 0) { + pjdlog_debug(1, "getaddrinfo(%s, %s) failed: %s.", iporhost, + portstr, gai_strerror(error)); + return (EINVAL); + } + if (res == NULL) + return (ENOENT); + + memcpy(sap, res->ai_addr, res->ai_addrlen); + + freeaddrinfo(res); + + return (0); +} + +static int +tcp_setup_new(const char *addr, int side, struct tcp_ctx **tctxp) +{ + struct tcp_ctx *tctx; + int error, nodelay; + + PJDLOG_ASSERT(addr != NULL); + PJDLOG_ASSERT(side == TCP_SIDE_CLIENT || + side == TCP_SIDE_SERVER_LISTEN); + PJDLOG_ASSERT(tctxp != NULL); + + tctx = malloc(sizeof(*tctx)); + if (tctx == NULL) + return (errno); + + /* Parse given address. */ + error = tcp_addr(addr, atoi(proto_get("tcp:port")), &tctx->tc_sa); + if (error != 0) { + free(tctx); + return (error); + } + + PJDLOG_ASSERT(tctx->tc_sa.ss_family != AF_UNSPEC); + + tctx->tc_fd = socket(tctx->tc_sa.ss_family, SOCK_STREAM, 0); + if (tctx->tc_fd == -1) { + error = errno; + free(tctx); + return (error); + } + + PJDLOG_ASSERT(tctx->tc_sa.ss_family != AF_UNSPEC); + + /* Socket settings. */ + nodelay = 1; + if (setsockopt(tctx->tc_fd, IPPROTO_TCP, TCP_NODELAY, &nodelay, + sizeof(nodelay)) == -1) { + pjdlog_errno(LOG_WARNING, "Unable to set TCP_NOELAY"); + } + + tctx->tc_wait_called = (side == TCP_SIDE_CLIENT ? false : true); + tctx->tc_side = side; + tctx->tc_magic = TCP_CTX_MAGIC; + *tctxp = tctx; + + return (0); +} + +static socklen_t +sockaddr_len(const struct sockaddr_storage *ss) +{ + +#ifdef HAVE_SOCKADDR_STORAGE_SS_LEN + return (ss->ss_len); +#else + switch (ss->ss_family) { + case AF_INET: + return (sizeof(struct sockaddr_in)); + case AF_INET6: + return (sizeof(struct sockaddr_in6)); + default: + PJDLOG_ABORT("Unexpected family %hhu.", ss->ss_family); + } +#endif +} + +static int +tcp_connect(const char *srcaddr, const char *dstaddr, int timeout, void **ctxp) +{ + struct tcp_ctx *tctx; + struct sockaddr_storage sa; + int error, flags, ret; + + PJDLOG_ASSERT(srcaddr == NULL || srcaddr[0] != '\0'); + PJDLOG_ASSERT(dstaddr != NULL); + PJDLOG_ASSERT(timeout >= -1); + + error = tcp_setup_new(dstaddr, TCP_SIDE_CLIENT, &tctx); + if (error != 0) + return (error); + if (srcaddr != NULL) { + error = tcp_addr(srcaddr, 0, &sa); + if (error != 0) + goto fail; + if (bind(tctx->tc_fd, (struct sockaddr *)&sa, + sockaddr_len(&sa)) == -1) { + error = errno; + goto fail; + } + } + + flags = fcntl(tctx->tc_fd, F_GETFL); + if (flags == -1) { + error = errno; + pjdlog_common(LOG_DEBUG, 1, errno, "fcntl(F_GETFL) failed"); + goto fail; + } + /* + * We make socket non-blocking so we can handle connection timeout + * manually. + */ + flags |= O_NONBLOCK; + if (fcntl(tctx->tc_fd, F_SETFL, flags) == -1) { + error = errno; + pjdlog_common(LOG_DEBUG, 1, errno, + "fcntl(F_SETFL, O_NONBLOCK) failed"); + goto fail; + } + + ret = connect(tctx->tc_fd, (struct sockaddr *)&tctx->tc_sa, + sockaddr_len(&tctx->tc_sa)); + if (ret == -1 && errno != EINPROGRESS) { + error = errno; + pjdlog_common(LOG_DEBUG, 1, errno, "connect() failed"); + goto fail; + } + + if (timeout >= 0) { + if (ret == -1) { + /* Connection still in progress. Wait for it. */ + error = tcp_connect_wait(tctx, timeout); + if (error != 0) + goto fail; + } else { + /* Connection already complete. */ + flags &= ~O_NONBLOCK; + if (fcntl(tctx->tc_fd, F_SETFL, flags) == -1) { + error = errno; + pjdlog_common(LOG_DEBUG, 1, errno, + "fcntl(F_SETFL, ~O_NONBLOCK) failed"); + goto fail; + } + } + } + + *ctxp = tctx; + return (0); +fail: + tcp_close(tctx); + return (error); +} + +static int +tcp_connect_wait(void *ctx, int timeout) +{ + struct tcp_ctx *tctx = ctx; + struct timeval tv; + fd_set fdset; + socklen_t esize; + int error, flags, ret; + + PJDLOG_ASSERT(tctx != NULL); + PJDLOG_ASSERT(tctx->tc_magic == TCP_CTX_MAGIC); + PJDLOG_ASSERT(tctx->tc_side == TCP_SIDE_CLIENT); + PJDLOG_ASSERT(!tctx->tc_wait_called); + PJDLOG_ASSERT(tctx->tc_fd >= 0); + PJDLOG_ASSERT(timeout >= 0); + + tv.tv_sec = timeout; + tv.tv_usec = 0; +again: + FD_ZERO(&fdset); + FD_SET(tctx->tc_fd, &fdset); + ret = select(tctx->tc_fd + 1, NULL, &fdset, NULL, &tv); + if (ret == 0) { + error = ETIMEDOUT; + goto done; + } else if (ret == -1) { + if (errno == EINTR) + goto again; + error = errno; + pjdlog_common(LOG_DEBUG, 1, errno, "select() failed"); + goto done; + } + PJDLOG_ASSERT(ret > 0); + PJDLOG_ASSERT(FD_ISSET(tctx->tc_fd, &fdset)); + esize = sizeof(error); + if (getsockopt(tctx->tc_fd, SOL_SOCKET, SO_ERROR, &error, + &esize) == -1) { + error = errno; + pjdlog_common(LOG_DEBUG, 1, errno, + "getsockopt(SO_ERROR) failed"); + goto done; + } + if (error != 0) { + pjdlog_common(LOG_DEBUG, 1, error, + "getsockopt(SO_ERROR) returned error"); + goto done; + } + error = 0; + tctx->tc_wait_called = true; +done: + flags = fcntl(tctx->tc_fd, F_GETFL); + if (flags == -1) { + if (error == 0) + error = errno; + pjdlog_common(LOG_DEBUG, 1, errno, "fcntl(F_GETFL) failed"); + return (error); + } + flags &= ~O_NONBLOCK; + if (fcntl(tctx->tc_fd, F_SETFL, flags) == -1) { + if (error == 0) + error = errno; + pjdlog_common(LOG_DEBUG, 1, errno, + "fcntl(F_SETFL, ~O_NONBLOCK) failed"); + } + return (error); +} + +static int +tcp_server(const char *addr, void **ctxp) +{ + struct tcp_ctx *tctx; + int error, val; + + error = tcp_setup_new(addr, TCP_SIDE_SERVER_LISTEN, &tctx); + if (error != 0) + return (error); + + val = 1; + /* Ignore failure. */ + (void)setsockopt(tctx->tc_fd, SOL_SOCKET, SO_REUSEADDR, &val, + sizeof(val)); + + PJDLOG_ASSERT(tctx->tc_sa.ss_family != AF_UNSPEC); + + if (bind(tctx->tc_fd, (struct sockaddr *)&tctx->tc_sa, + sockaddr_len(&tctx->tc_sa)) == -1) { + error = errno; + tcp_close(tctx); + return (error); + } + if (listen(tctx->tc_fd, 8) == -1) { + error = errno; + tcp_close(tctx); + return (error); + } + + *ctxp = tctx; + + return (0); +} + +static int +tcp_accept(void *ctx, void **newctxp) +{ + struct tcp_ctx *tctx = ctx; + struct tcp_ctx *newtctx; + socklen_t fromlen; + int ret; + + PJDLOG_ASSERT(tctx != NULL); + PJDLOG_ASSERT(tctx->tc_magic == TCP_CTX_MAGIC); + PJDLOG_ASSERT(tctx->tc_side == TCP_SIDE_SERVER_LISTEN); + PJDLOG_ASSERT(tctx->tc_fd >= 0); + PJDLOG_ASSERT(tctx->tc_sa.ss_family != AF_UNSPEC); + + newtctx = malloc(sizeof(*newtctx)); + if (newtctx == NULL) + return (errno); + + fromlen = sockaddr_len(&tctx->tc_sa); + newtctx->tc_fd = accept(tctx->tc_fd, (struct sockaddr *)&tctx->tc_sa, + &fromlen); + if (newtctx->tc_fd < 0) { + ret = errno; + free(newtctx); + return (ret); + } + + newtctx->tc_wait_called = true; + newtctx->tc_side = TCP_SIDE_SERVER_WORK; + newtctx->tc_magic = TCP_CTX_MAGIC; + *newctxp = newtctx; + + return (0); +} + +static int +tcp_wrap(int fd, bool client, void **ctxp) +{ + struct tcp_ctx *tctx; + + PJDLOG_ASSERT(fd >= 0); + PJDLOG_ASSERT(ctxp != NULL); + + tctx = malloc(sizeof(*tctx)); + if (tctx == NULL) + return (errno); + + tctx->tc_fd = fd; + tctx->tc_sa.ss_family = AF_UNSPEC; + tctx->tc_wait_called = (client ? false : true); + tctx->tc_side = (client ? TCP_SIDE_CLIENT : TCP_SIDE_SERVER_WORK); + tctx->tc_magic = TCP_CTX_MAGIC; + *ctxp = tctx; + + return (0); +} + +static int +tcp_send(void *ctx, const unsigned char *data, size_t size, int fd) +{ + struct tcp_ctx *tctx = ctx; + + PJDLOG_ASSERT(tctx != NULL); + PJDLOG_ASSERT(tctx->tc_magic == TCP_CTX_MAGIC); + PJDLOG_ASSERT(tctx->tc_side == TCP_SIDE_CLIENT || + tctx->tc_side == TCP_SIDE_SERVER_WORK); + PJDLOG_ASSERT(tctx->tc_wait_called); + PJDLOG_ASSERT(tctx->tc_fd >= 0); + PJDLOG_ASSERT(fd == -1); + + return (proto_common_send(tctx->tc_fd, data, size, -1)); +} + +static int +tcp_recv(void *ctx, unsigned char *data, size_t size, int *fdp) +{ + struct tcp_ctx *tctx = ctx; + + PJDLOG_ASSERT(tctx != NULL); + PJDLOG_ASSERT(tctx->tc_magic == TCP_CTX_MAGIC); + PJDLOG_ASSERT(tctx->tc_side == TCP_SIDE_CLIENT || + tctx->tc_side == TCP_SIDE_SERVER_WORK); + PJDLOG_ASSERT(tctx->tc_wait_called); + PJDLOG_ASSERT(tctx->tc_fd >= 0); + PJDLOG_ASSERT(fdp == NULL); + + return (proto_common_recv(tctx->tc_fd, data, size, NULL)); +} + +static int +tcp_descriptor(const void *ctx) +{ + const struct tcp_ctx *tctx = ctx; + + PJDLOG_ASSERT(tctx != NULL); + PJDLOG_ASSERT(tctx->tc_magic == TCP_CTX_MAGIC); + + return (tctx->tc_fd); +} + +static bool +tcp_address_match(const void *ctx, const char *addr) +{ + const struct tcp_ctx *tctx = ctx; + struct sockaddr_storage sa1, sa2; + socklen_t salen; + + PJDLOG_ASSERT(tctx != NULL); + PJDLOG_ASSERT(tctx->tc_magic == TCP_CTX_MAGIC); + + if (tcp_addr(addr, atoi(proto_get("tcp:port")), &sa1) != 0) + return (false); + + salen = sizeof(sa2); + if (getpeername(tctx->tc_fd, (struct sockaddr *)&sa2, &salen) < 0) + return (false); + + if (sa1.ss_family != sa2.ss_family) + return (false); + +#ifdef HAVE_SOCKADDR_STORAGE_SS_LEN + if (sa1.ss_len != sa2.ss_len) + return (false); +#endif + + switch (sa1.ss_family) { + case AF_INET: + { + struct sockaddr_in *sin1, *sin2; + + sin1 = (struct sockaddr_in *)&sa1; + sin2 = (struct sockaddr_in *)&sa2; + + return (memcmp(&sin1->sin_addr, &sin2->sin_addr, + sizeof(sin1->sin_addr)) == 0); + } + case AF_INET6: + { + struct sockaddr_in6 *sin1, *sin2; + + sin1 = (struct sockaddr_in6 *)&sa1; + sin2 = (struct sockaddr_in6 *)&sa2; + + return (memcmp(&sin1->sin6_addr, &sin2->sin6_addr, + sizeof(sin1->sin6_addr)) == 0); + } + default: + return (false); + } +} + +#ifndef __FreeBSD__ +static void +sockaddr_to_string(const void *sa, char *buf, size_t size) +{ + const struct sockaddr_storage *ss; + + ss = (const struct sockaddr_storage * const *)sa; + switch (ss->ss_family) { + case AF_INET: + { + char addr[INET_ADDRSTRLEN]; + const struct sockaddr_in *sin; + unsigned int port; + + sin = (const struct sockaddr_in *)ss; + port = ntohs(sin->sin_port); + if (inet_ntop(ss->ss_family, &sin->sin_addr, addr, + sizeof(addr)) == NULL) { + PJDLOG_ABORT("inet_ntop(AF_INET) failed: %s.", + strerror(errno)); + } + snprintf(buf, size, "%s:%u", addr, port); + break; + } + case AF_INET6: + { + char addr[INET6_ADDRSTRLEN]; + const struct sockaddr_in6 *sin; + unsigned int port; + + sin = (const struct sockaddr_in6 *)ss; + port = ntohs(sin->sin6_port); + if (inet_ntop(ss->ss_family, &sin->sin6_addr, addr, + sizeof(addr)) == NULL) { + PJDLOG_ABORT("inet_ntop(AF_INET6) failed: %s.", + strerror(errno)); + } + snprintf(buf, size, "[%s]:%u", addr, port); + break; + } + default: + snprintf(buf, size, "[unsupported family %hhu]", + ss->ss_family); + break; + } +} +#endif /* !__FreeBSD__ */ + +static void +tcp_local_address(const void *ctx, char *addr, size_t size) +{ + const struct tcp_ctx *tctx = ctx; + struct sockaddr_storage sa; + socklen_t salen; + + PJDLOG_ASSERT(tctx != NULL); + PJDLOG_ASSERT(tctx->tc_magic == TCP_CTX_MAGIC); + + salen = sizeof(sa); + if (getsockname(tctx->tc_fd, (struct sockaddr *)&sa, &salen) < 0) { + PJDLOG_VERIFY(strlcpy(addr, "N/A", size) < size); + return; + } +#ifdef __FreeBSD__ + PJDLOG_VERIFY(snprintf(addr, size, "tcp://%S", &sa) < (ssize_t)size); +#else + strlcpy(addr, "tcp://", size); + if (size > 6) + sockaddr_to_string(&sa, addr + 6, size - 6); +#endif +} + +static void +tcp_remote_address(const void *ctx, char *addr, size_t size) +{ + const struct tcp_ctx *tctx = ctx; + struct sockaddr_storage sa; + socklen_t salen; + + PJDLOG_ASSERT(tctx != NULL); + PJDLOG_ASSERT(tctx->tc_magic == TCP_CTX_MAGIC); + + salen = sizeof(sa); + if (getpeername(tctx->tc_fd, (struct sockaddr *)&sa, &salen) < 0) { + PJDLOG_VERIFY(strlcpy(addr, "N/A", size) < size); + return; + } +#ifdef __FreeBSD__ + PJDLOG_VERIFY(snprintf(addr, size, "tcp://%S", &sa) < (ssize_t)size); +#else + strlcpy(addr, "tcp://", size); + if (size > 6) + sockaddr_to_string(&sa, addr + 6, size - 6); +#endif +} + +static void +tcp_close(void *ctx) +{ + struct tcp_ctx *tctx = ctx; + + PJDLOG_ASSERT(tctx != NULL); + PJDLOG_ASSERT(tctx->tc_magic == TCP_CTX_MAGIC); + + if (tctx->tc_fd >= 0) + close(tctx->tc_fd); + tctx->tc_magic = 0; + free(tctx); +} + +static struct proto tcp_proto = { + .prt_name = "tcp", + .prt_connect = tcp_connect, + .prt_connect_wait = tcp_connect_wait, + .prt_server = tcp_server, + .prt_accept = tcp_accept, + .prt_wrap = tcp_wrap, + .prt_send = tcp_send, + .prt_recv = tcp_recv, + .prt_descriptor = tcp_descriptor, + .prt_address_match = tcp_address_match, + .prt_local_address = tcp_local_address, + .prt_remote_address = tcp_remote_address, + .prt_close = tcp_close +}; + +static __constructor void +tcp_ctor(void) +{ + + proto_register(&tcp_proto, true); +} diff --git a/bin/auditdistd/proto_tls.c b/bin/auditdistd/proto_tls.c new file mode 100644 index 000000000000..bcb461c63ab2 --- /dev/null +++ b/bin/auditdistd/proto_tls.c @@ -0,0 +1,1078 @@ +/*- + * Copyright (c) 2011 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/proto_tls.c#1 $ + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <sys/param.h> /* MAXHOSTNAMELEN */ +#include <sys/socket.h> + +#include <arpa/inet.h> + +#include <netinet/in.h> +#include <netinet/tcp.h> + +#include <errno.h> +#include <fcntl.h> +#include <netdb.h> +#include <signal.h> +#include <stdbool.h> +#include <stdint.h> +#include <stdio.h> +#include <string.h> +#include <unistd.h> + +#include <openssl/err.h> +#include <openssl/ssl.h> + +#include <compat/compat.h> +#ifndef HAVE_CLOSEFROM +#include <compat/closefrom.h> +#endif +#ifndef HAVE_STRLCPY +#include <compat/strlcpy.h> +#endif + +#include "pjdlog.h" +#include "proto_impl.h" +#include "sandbox.h" +#include "subr.h" + +#define TLS_CTX_MAGIC 0x715c7 +struct tls_ctx { + int tls_magic; + struct proto_conn *tls_sock; + struct proto_conn *tls_tcp; + char tls_laddr[256]; + char tls_raddr[256]; + int tls_side; +#define TLS_SIDE_CLIENT 0 +#define TLS_SIDE_SERVER_LISTEN 1 +#define TLS_SIDE_SERVER_WORK 2 + bool tls_wait_called; +}; + +#define TLS_DEFAULT_TIMEOUT 30 + +static int tls_connect_wait(void *ctx, int timeout); +static void tls_close(void *ctx); + +static void +block(int fd) +{ + int flags; + + flags = fcntl(fd, F_GETFL); + if (flags == -1) + pjdlog_exit(EX_TEMPFAIL, "fcntl(F_GETFL) failed"); + flags &= ~O_NONBLOCK; + if (fcntl(fd, F_SETFL, flags) == -1) + pjdlog_exit(EX_TEMPFAIL, "fcntl(F_SETFL) failed"); +} + +static void +nonblock(int fd) +{ + int flags; + + flags = fcntl(fd, F_GETFL); + if (flags == -1) + pjdlog_exit(EX_TEMPFAIL, "fcntl(F_GETFL) failed"); + flags |= O_NONBLOCK; + if (fcntl(fd, F_SETFL, flags) == -1) + pjdlog_exit(EX_TEMPFAIL, "fcntl(F_SETFL) failed"); +} + +static int +wait_for_fd(int fd, int timeout) +{ + struct timeval tv; + fd_set fdset; + int error, ret; + + error = 0; + + for (;;) { + FD_ZERO(&fdset); + FD_SET(fd, &fdset); + + tv.tv_sec = timeout; + tv.tv_usec = 0; + + ret = select(fd + 1, NULL, &fdset, NULL, + timeout == -1 ? NULL : &tv); + if (ret == 0) { + error = ETIMEDOUT; + break; + } else if (ret == -1) { + if (errno == EINTR) + continue; + error = errno; + break; + } + PJDLOG_ASSERT(ret > 0); + PJDLOG_ASSERT(FD_ISSET(fd, &fdset)); + break; + } + + return (error); +} + +static void +ssl_log_errors(void) +{ + unsigned long error; + + while ((error = ERR_get_error()) != 0) + pjdlog_error("SSL error: %s", ERR_error_string(error, NULL)); +} + +static int +ssl_check_error(SSL *ssl, int ret) +{ + int error; + + error = SSL_get_error(ssl, ret); + + switch (error) { + case SSL_ERROR_NONE: + return (0); + case SSL_ERROR_WANT_READ: + pjdlog_debug(2, "SSL_ERROR_WANT_READ"); + return (-1); + case SSL_ERROR_WANT_WRITE: + pjdlog_debug(2, "SSL_ERROR_WANT_WRITE"); + return (-1); + case SSL_ERROR_ZERO_RETURN: + pjdlog_exitx(EX_OK, "Connection closed."); + case SSL_ERROR_SYSCALL: + ssl_log_errors(); + pjdlog_exitx(EX_TEMPFAIL, "SSL I/O error."); + case SSL_ERROR_SSL: + ssl_log_errors(); + pjdlog_exitx(EX_TEMPFAIL, "SSL protocol error."); + default: + ssl_log_errors(); + pjdlog_exitx(EX_TEMPFAIL, "Unknown SSL error (%d).", error); + } +} + +static void +tcp_recv_ssl_send(int recvfd, SSL *sendssl) +{ + static unsigned char buf[65536]; + ssize_t tcpdone; + int sendfd, ssldone; + + sendfd = SSL_get_fd(sendssl); + PJDLOG_ASSERT(sendfd >= 0); + pjdlog_debug(2, "%s: start %d -> %d", __func__, recvfd, sendfd); + for (;;) { + tcpdone = recv(recvfd, buf, sizeof(buf), 0); + pjdlog_debug(2, "%s: recv() returned %zd", __func__, tcpdone); + if (tcpdone == 0) { + pjdlog_debug(1, "Connection terminated."); + exit(0); + } else if (tcpdone == -1) { + if (errno == EINTR) + continue; + else if (errno == EAGAIN) + break; + pjdlog_exit(EX_TEMPFAIL, "recv() failed"); + } + for (;;) { + ssldone = SSL_write(sendssl, buf, (int)tcpdone); + pjdlog_debug(2, "%s: send() returned %d", __func__, + ssldone); + if (ssl_check_error(sendssl, ssldone) == -1) { + (void)wait_for_fd(sendfd, -1); + continue; + } + PJDLOG_ASSERT(ssldone == tcpdone); + break; + } + } + pjdlog_debug(2, "%s: done %d -> %d", __func__, recvfd, sendfd); +} + +static void +ssl_recv_tcp_send(SSL *recvssl, int sendfd) +{ + static unsigned char buf[65536]; + unsigned char *ptr; + ssize_t tcpdone; + size_t todo; + int recvfd, ssldone; + + recvfd = SSL_get_fd(recvssl); + PJDLOG_ASSERT(recvfd >= 0); + pjdlog_debug(2, "%s: start %d -> %d", __func__, recvfd, sendfd); + for (;;) { + ssldone = SSL_read(recvssl, buf, sizeof(buf)); + pjdlog_debug(2, "%s: SSL_read() returned %d", __func__, + ssldone); + if (ssl_check_error(recvssl, ssldone) == -1) + break; + todo = (size_t)ssldone; + ptr = buf; + do { + tcpdone = send(sendfd, ptr, todo, MSG_NOSIGNAL); + pjdlog_debug(2, "%s: send() returned %zd", __func__, + tcpdone); + if (tcpdone == 0) { + pjdlog_debug(1, "Connection terminated."); + exit(0); + } else if (tcpdone == -1) { + if (errno == EINTR || errno == ENOBUFS) + continue; + if (errno == EAGAIN) { + (void)wait_for_fd(sendfd, -1); + continue; + } + pjdlog_exit(EX_TEMPFAIL, "send() failed"); + } + todo -= tcpdone; + ptr += tcpdone; + } while (todo > 0); + } + pjdlog_debug(2, "%s: done %d -> %d", __func__, recvfd, sendfd); +} + +static void +tls_loop(int sockfd, SSL *tcpssl) +{ + fd_set fds; + int maxfd, tcpfd; + + tcpfd = SSL_get_fd(tcpssl); + PJDLOG_ASSERT(tcpfd >= 0); + + for (;;) { + FD_ZERO(&fds); + FD_SET(sockfd, &fds); + FD_SET(tcpfd, &fds); + maxfd = MAX(sockfd, tcpfd); + + PJDLOG_ASSERT(maxfd + 1 <= (int)FD_SETSIZE); + if (select(maxfd + 1, &fds, NULL, NULL, NULL) == -1) { + if (errno == EINTR) + continue; + pjdlog_exit(EX_TEMPFAIL, "select() failed"); + } + if (FD_ISSET(sockfd, &fds)) + tcp_recv_ssl_send(sockfd, tcpssl); + if (FD_ISSET(tcpfd, &fds)) + ssl_recv_tcp_send(tcpssl, sockfd); + } +} + +static void +tls_certificate_verify(SSL *ssl, const char *fingerprint) +{ + unsigned char md[EVP_MAX_MD_SIZE]; + char mdstr[sizeof("SHA256=") - 1 + EVP_MAX_MD_SIZE * 3]; + char *mdstrp; + unsigned int i, mdsize; + X509 *cert; + + if (fingerprint[0] == '\0') { + pjdlog_debug(1, "No fingerprint verification requested."); + return; + } + + cert = SSL_get_peer_certificate(ssl); + if (cert == NULL) + pjdlog_exitx(EX_TEMPFAIL, "No peer certificate received."); + + if (X509_digest(cert, EVP_sha256(), md, &mdsize) != 1) + pjdlog_exitx(EX_TEMPFAIL, "X509_digest() failed."); + PJDLOG_ASSERT(mdsize <= EVP_MAX_MD_SIZE); + + X509_free(cert); + + (void)strlcpy(mdstr, "SHA256=", sizeof(mdstr)); + mdstrp = mdstr + strlen(mdstr); + for (i = 0; i < mdsize; i++) { + PJDLOG_VERIFY(mdstrp + 3 <= mdstr + sizeof(mdstr)); + (void)sprintf(mdstrp, "%02hhX:", md[i]); + mdstrp += 3; + } + /* Clear last colon. */ + mdstrp[-1] = '\0'; + if (strcasecmp(mdstr, fingerprint) != 0) { + pjdlog_exitx(EX_NOPERM, + "Finger print doesn't match. Received \"%s\", expected \"%s\"", + mdstr, fingerprint); + } +} + +static void +tls_exec_client(const char *user, int startfd, const char *srcaddr, + const char *dstaddr, const char *fingerprint, const char *defport, + int timeout, int debuglevel) +{ + struct proto_conn *tcp; + char *saddr, *daddr; + SSL_CTX *sslctx; + SSL *ssl; + long ret; + int sockfd, tcpfd; + uint8_t connected; + + pjdlog_debug_set(debuglevel); + pjdlog_prefix_set("[TLS sandbox] (client) "); +#ifdef HAVE_SETPROCTITLE + setproctitle("[TLS sandbox] (client) "); +#endif + proto_set("tcp:port", defport); + + sockfd = startfd; + + /* Change tls:// to tcp://. */ + if (srcaddr == NULL) { + saddr = NULL; + } else { + saddr = strdup(srcaddr); + if (saddr == NULL) + pjdlog_exitx(EX_TEMPFAIL, "Unable to allocate memory."); + bcopy("tcp://", saddr, 6); + } + daddr = strdup(dstaddr); + if (daddr == NULL) + pjdlog_exitx(EX_TEMPFAIL, "Unable to allocate memory."); + bcopy("tcp://", daddr, 6); + + /* Establish TCP connection. */ + if (proto_connect(saddr, daddr, timeout, &tcp) == -1) + exit(EX_TEMPFAIL); + + SSL_load_error_strings(); + SSL_library_init(); + + /* + * TODO: On FreeBSD we could move this below sandbox() once libc and + * libcrypto use sysctl kern.arandom to obtain random data + * instead of /dev/urandom and friends. + */ + sslctx = SSL_CTX_new(TLSv1_client_method()); + if (sslctx == NULL) + pjdlog_exitx(EX_TEMPFAIL, "SSL_CTX_new() failed."); + + if (sandbox(user, true, "proto_tls client: %s", dstaddr) != 0) + pjdlog_exitx(EX_CONFIG, "Unable to sandbox TLS client."); + pjdlog_debug(1, "Privileges successfully dropped."); + + SSL_CTX_set_options(sslctx, SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3); + + /* Load CA certs. */ + /* TODO */ + //SSL_CTX_load_verify_locations(sslctx, cacerts_file, NULL); + + ssl = SSL_new(sslctx); + if (ssl == NULL) + pjdlog_exitx(EX_TEMPFAIL, "SSL_new() failed."); + + tcpfd = proto_descriptor(tcp); + + block(tcpfd); + + if (SSL_set_fd(ssl, tcpfd) != 1) + pjdlog_exitx(EX_TEMPFAIL, "SSL_set_fd() failed."); + + ret = SSL_connect(ssl); + ssl_check_error(ssl, (int)ret); + + nonblock(sockfd); + nonblock(tcpfd); + + tls_certificate_verify(ssl, fingerprint); + + /* + * The following byte is send to make proto_connect_wait() to work. + */ + connected = 1; + for (;;) { + switch (send(sockfd, &connected, sizeof(connected), 0)) { + case -1: + if (errno == EINTR || errno == ENOBUFS) + continue; + if (errno == EAGAIN) { + (void)wait_for_fd(sockfd, -1); + continue; + } + pjdlog_exit(EX_TEMPFAIL, "send() failed"); + case 0: + pjdlog_debug(1, "Connection terminated."); + exit(0); + case 1: + break; + } + break; + } + + tls_loop(sockfd, ssl); +} + +static void +tls_call_exec_client(struct proto_conn *sock, const char *srcaddr, + const char *dstaddr, int timeout) +{ + char *timeoutstr, *startfdstr, *debugstr; + int startfd; + + /* Declare that we are receiver. */ + proto_recv(sock, NULL, 0); + + if (pjdlog_mode_get() == PJDLOG_MODE_STD) + startfd = 3; + else /* if (pjdlog_mode_get() == PJDLOG_MODE_SYSLOG) */ + startfd = 0; + + if (proto_descriptor(sock) != startfd) { + /* Move socketpair descriptor to descriptor number startfd. */ + if (dup2(proto_descriptor(sock), startfd) == -1) + pjdlog_exit(EX_OSERR, "dup2() failed"); + proto_close(sock); + } else { + /* + * The FD_CLOEXEC is cleared by dup2(2), so when we not + * call it, we have to clear it by hand in case it is set. + */ + if (fcntl(startfd, F_SETFD, 0) == -1) + pjdlog_exit(EX_OSERR, "fcntl() failed"); + } + + closefrom(startfd + 1); + + if (asprintf(&startfdstr, "%d", startfd) == -1) + pjdlog_exit(EX_TEMPFAIL, "asprintf() failed"); + if (timeout == -1) + timeout = TLS_DEFAULT_TIMEOUT; + if (asprintf(&timeoutstr, "%d", timeout) == -1) + pjdlog_exit(EX_TEMPFAIL, "asprintf() failed"); + if (asprintf(&debugstr, "%d", pjdlog_debug_get()) == -1) + pjdlog_exit(EX_TEMPFAIL, "asprintf() failed"); + + execl(proto_get("execpath"), proto_get("execpath"), "proto", "tls", + proto_get("user"), "client", startfdstr, + srcaddr == NULL ? "" : srcaddr, dstaddr, + proto_get("tls:fingerprint"), proto_get("tcp:port"), timeoutstr, + debugstr, NULL); + pjdlog_exit(EX_SOFTWARE, "execl() failed"); +} + +static int +tls_connect(const char *srcaddr, const char *dstaddr, int timeout, void **ctxp) +{ + struct tls_ctx *tlsctx; + struct proto_conn *sock; + pid_t pid; + int error; + + PJDLOG_ASSERT(srcaddr == NULL || srcaddr[0] != '\0'); + PJDLOG_ASSERT(dstaddr != NULL); + PJDLOG_ASSERT(timeout >= -1); + PJDLOG_ASSERT(ctxp != NULL); + + if (strncmp(dstaddr, "tls://", 6) != 0) + return (-1); + if (srcaddr != NULL && strncmp(srcaddr, "tls://", 6) != 0) + return (-1); + + if (proto_connect(NULL, "socketpair://", -1, &sock) == -1) + return (errno); + +#if 0 + /* + * We use rfork() with the following flags to disable SIGCHLD + * delivery upon the sandbox process exit. + */ + pid = rfork(RFFDG | RFPROC | RFTSIGZMB | RFTSIGFLAGS(0)); +#else + /* + * We don't use rfork() to be able to log information about sandbox + * process exiting. + */ + pid = fork(); +#endif + switch (pid) { + case -1: + /* Failure. */ + error = errno; + proto_close(sock); + return (error); + case 0: + /* Child. */ + pjdlog_prefix_set("[TLS sandbox] (client) "); +#ifdef HAVE_SETPROCTITLE + setproctitle("[TLS sandbox] (client) "); +#endif + tls_call_exec_client(sock, srcaddr, dstaddr, timeout); + /* NOTREACHED */ + default: + /* Parent. */ + tlsctx = calloc(1, sizeof(*tlsctx)); + if (tlsctx == NULL) { + error = errno; + proto_close(sock); + (void)kill(pid, SIGKILL); + return (error); + } + proto_send(sock, NULL, 0); + tlsctx->tls_sock = sock; + tlsctx->tls_tcp = NULL; + tlsctx->tls_side = TLS_SIDE_CLIENT; + tlsctx->tls_wait_called = false; + tlsctx->tls_magic = TLS_CTX_MAGIC; + if (timeout >= 0) { + error = tls_connect_wait(tlsctx, timeout); + if (error != 0) { + (void)kill(pid, SIGKILL); + tls_close(tlsctx); + return (error); + } + } + *ctxp = tlsctx; + return (0); + } +} + +static int +tls_connect_wait(void *ctx, int timeout) +{ + struct tls_ctx *tlsctx = ctx; + int error, sockfd; + uint8_t connected; + + PJDLOG_ASSERT(tlsctx != NULL); + PJDLOG_ASSERT(tlsctx->tls_magic == TLS_CTX_MAGIC); + PJDLOG_ASSERT(tlsctx->tls_side == TLS_SIDE_CLIENT); + PJDLOG_ASSERT(tlsctx->tls_sock != NULL); + PJDLOG_ASSERT(!tlsctx->tls_wait_called); + PJDLOG_ASSERT(timeout >= 0); + + sockfd = proto_descriptor(tlsctx->tls_sock); + error = wait_for_fd(sockfd, timeout); + if (error != 0) + return (error); + + for (;;) { + switch (recv(sockfd, &connected, sizeof(connected), + MSG_WAITALL)) { + case -1: + if (errno == EINTR || errno == ENOBUFS) + continue; + error = errno; + break; + case 0: + pjdlog_debug(1, "Connection terminated."); + error = ENOTCONN; + break; + case 1: + tlsctx->tls_wait_called = true; + break; + } + break; + } + + return (error); +} + +static int +tls_server(const char *lstaddr, void **ctxp) +{ + struct proto_conn *tcp; + struct tls_ctx *tlsctx; + char *laddr; + int error; + + if (strncmp(lstaddr, "tls://", 6) != 0) + return (-1); + + tlsctx = malloc(sizeof(*tlsctx)); + if (tlsctx == NULL) { + pjdlog_warning("Unable to allocate memory."); + return (ENOMEM); + } + + laddr = strdup(lstaddr); + if (laddr == NULL) { + free(tlsctx); + pjdlog_warning("Unable to allocate memory."); + return (ENOMEM); + } + bcopy("tcp://", laddr, 6); + + if (proto_server(laddr, &tcp) == -1) { + error = errno; + free(tlsctx); + free(laddr); + return (error); + } + free(laddr); + + tlsctx->tls_sock = NULL; + tlsctx->tls_tcp = tcp; + tlsctx->tls_side = TLS_SIDE_SERVER_LISTEN; + tlsctx->tls_wait_called = true; + tlsctx->tls_magic = TLS_CTX_MAGIC; + *ctxp = tlsctx; + + return (0); +} + +static void +tls_exec_server(const char *user, int startfd, const char *privkey, + const char *cert, int debuglevel) +{ + SSL_CTX *sslctx; + SSL *ssl; + int sockfd, tcpfd, ret; + + pjdlog_debug_set(debuglevel); + pjdlog_prefix_set("[TLS sandbox] (server) "); +#ifdef HAVE_SETPROCTITLE + setproctitle("[TLS sandbox] (server) "); +#endif + + sockfd = startfd; + tcpfd = startfd + 1; + + SSL_load_error_strings(); + SSL_library_init(); + + sslctx = SSL_CTX_new(TLSv1_server_method()); + if (sslctx == NULL) + pjdlog_exitx(EX_TEMPFAIL, "SSL_CTX_new() failed."); + + SSL_CTX_set_options(sslctx, SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3); + + ssl = SSL_new(sslctx); + if (ssl == NULL) + pjdlog_exitx(EX_TEMPFAIL, "SSL_new() failed."); + + if (SSL_use_RSAPrivateKey_file(ssl, privkey, SSL_FILETYPE_PEM) != 1) { + ssl_log_errors(); + pjdlog_exitx(EX_CONFIG, + "SSL_use_RSAPrivateKey_file(%s) failed.", privkey); + } + + if (SSL_use_certificate_file(ssl, cert, SSL_FILETYPE_PEM) != 1) { + ssl_log_errors(); + pjdlog_exitx(EX_CONFIG, "SSL_use_certificate_file(%s) failed.", + cert); + } + + if (sandbox(user, true, "proto_tls server") != 0) + pjdlog_exitx(EX_CONFIG, "Unable to sandbox TLS server."); + pjdlog_debug(1, "Privileges successfully dropped."); + + nonblock(sockfd); + nonblock(tcpfd); + + if (SSL_set_fd(ssl, tcpfd) != 1) + pjdlog_exitx(EX_TEMPFAIL, "SSL_set_fd() failed."); + + ret = SSL_accept(ssl); + ssl_check_error(ssl, ret); + + tls_loop(sockfd, ssl); +} + +static void +tls_call_exec_server(struct proto_conn *sock, struct proto_conn *tcp) +{ + int startfd, sockfd, tcpfd, safefd; + char *startfdstr, *debugstr; + + if (pjdlog_mode_get() == PJDLOG_MODE_STD) + startfd = 3; + else /* if (pjdlog_mode_get() == PJDLOG_MODE_SYSLOG) */ + startfd = 0; + + /* Declare that we are receiver. */ + proto_send(sock, NULL, 0); + + sockfd = proto_descriptor(sock); + tcpfd = proto_descriptor(tcp); + + safefd = MAX(sockfd, tcpfd); + safefd = MAX(safefd, startfd); + safefd++; + + /* Move sockfd and tcpfd to safe numbers first. */ + if (dup2(sockfd, safefd) == -1) + pjdlog_exit(EX_OSERR, "dup2() failed"); + proto_close(sock); + sockfd = safefd; + if (dup2(tcpfd, safefd + 1) == -1) + pjdlog_exit(EX_OSERR, "dup2() failed"); + proto_close(tcp); + tcpfd = safefd + 1; + + /* Move socketpair descriptor to descriptor number startfd. */ + if (dup2(sockfd, startfd) == -1) + pjdlog_exit(EX_OSERR, "dup2() failed"); + (void)close(sockfd); + /* Move tcp descriptor to descriptor number startfd + 1. */ + if (dup2(tcpfd, startfd + 1) == -1) + pjdlog_exit(EX_OSERR, "dup2() failed"); + (void)close(tcpfd); + + closefrom(startfd + 2); + + /* + * Even if FD_CLOEXEC was set on descriptors before dup2(), it should + * have been cleared on dup2(), but better be safe than sorry. + */ + if (fcntl(startfd, F_SETFD, 0) == -1) + pjdlog_exit(EX_OSERR, "fcntl() failed"); + if (fcntl(startfd + 1, F_SETFD, 0) == -1) + pjdlog_exit(EX_OSERR, "fcntl() failed"); + + if (asprintf(&startfdstr, "%d", startfd) == -1) + pjdlog_exit(EX_TEMPFAIL, "asprintf() failed"); + if (asprintf(&debugstr, "%d", pjdlog_debug_get()) == -1) + pjdlog_exit(EX_TEMPFAIL, "asprintf() failed"); + + execl(proto_get("execpath"), proto_get("execpath"), "proto", "tls", + proto_get("user"), "server", startfdstr, proto_get("tls:keyfile"), + proto_get("tls:certfile"), debugstr, NULL); + pjdlog_exit(EX_SOFTWARE, "execl() failed"); +} + +static int +tls_accept(void *ctx, void **newctxp) +{ + struct tls_ctx *tlsctx = ctx; + struct tls_ctx *newtlsctx; + struct proto_conn *sock, *tcp; + pid_t pid; + int error; + + PJDLOG_ASSERT(tlsctx != NULL); + PJDLOG_ASSERT(tlsctx->tls_magic == TLS_CTX_MAGIC); + PJDLOG_ASSERT(tlsctx->tls_side == TLS_SIDE_SERVER_LISTEN); + + if (proto_connect(NULL, "socketpair://", -1, &sock) == -1) + return (errno); + + /* Accept TCP connection. */ + if (proto_accept(tlsctx->tls_tcp, &tcp) == -1) { + error = errno; + proto_close(sock); + return (error); + } + + pid = fork(); + switch (pid) { + case -1: + /* Failure. */ + error = errno; + proto_close(sock); + return (error); + case 0: + /* Child. */ + pjdlog_prefix_set("[TLS sandbox] (server) "); +#ifdef HAVE_SETPROCTITLE + setproctitle("[TLS sandbox] (server) "); +#endif + /* Close listen socket. */ + proto_close(tlsctx->tls_tcp); + tls_call_exec_server(sock, tcp); + /* NOTREACHED */ + PJDLOG_ABORT("Unreachable."); + default: + /* Parent. */ + newtlsctx = calloc(1, sizeof(*tlsctx)); + if (newtlsctx == NULL) { + error = errno; + proto_close(sock); + proto_close(tcp); + (void)kill(pid, SIGKILL); + return (error); + } + proto_local_address(tcp, newtlsctx->tls_laddr, + sizeof(newtlsctx->tls_laddr)); + PJDLOG_ASSERT(strncmp(newtlsctx->tls_laddr, "tcp://", 6) == 0); + bcopy("tls://", newtlsctx->tls_laddr, 6); + *strrchr(newtlsctx->tls_laddr, ':') = '\0'; + proto_remote_address(tcp, newtlsctx->tls_raddr, + sizeof(newtlsctx->tls_raddr)); + PJDLOG_ASSERT(strncmp(newtlsctx->tls_raddr, "tcp://", 6) == 0); + bcopy("tls://", newtlsctx->tls_raddr, 6); + *strrchr(newtlsctx->tls_raddr, ':') = '\0'; + proto_close(tcp); + proto_recv(sock, NULL, 0); + newtlsctx->tls_sock = sock; + newtlsctx->tls_tcp = NULL; + newtlsctx->tls_wait_called = true; + newtlsctx->tls_side = TLS_SIDE_SERVER_WORK; + newtlsctx->tls_magic = TLS_CTX_MAGIC; + *newctxp = newtlsctx; + return (0); + } +} + +static int +tls_wrap(int fd, bool client, void **ctxp) +{ + struct tls_ctx *tlsctx; + struct proto_conn *sock; + int error; + + tlsctx = calloc(1, sizeof(*tlsctx)); + if (tlsctx == NULL) + return (errno); + + if (proto_wrap("socketpair", client, fd, &sock) == -1) { + error = errno; + free(tlsctx); + return (error); + } + + tlsctx->tls_sock = sock; + tlsctx->tls_tcp = NULL; + tlsctx->tls_wait_called = (client ? false : true); + tlsctx->tls_side = (client ? TLS_SIDE_CLIENT : TLS_SIDE_SERVER_WORK); + tlsctx->tls_magic = TLS_CTX_MAGIC; + *ctxp = tlsctx; + + return (0); +} + +static int +tls_send(void *ctx, const unsigned char *data, size_t size, int fd) +{ + struct tls_ctx *tlsctx = ctx; + + PJDLOG_ASSERT(tlsctx != NULL); + PJDLOG_ASSERT(tlsctx->tls_magic == TLS_CTX_MAGIC); + PJDLOG_ASSERT(tlsctx->tls_side == TLS_SIDE_CLIENT || + tlsctx->tls_side == TLS_SIDE_SERVER_WORK); + PJDLOG_ASSERT(tlsctx->tls_sock != NULL); + PJDLOG_ASSERT(tlsctx->tls_wait_called); + PJDLOG_ASSERT(fd == -1); + + if (proto_send(tlsctx->tls_sock, data, size) == -1) + return (errno); + + return (0); +} + +static int +tls_recv(void *ctx, unsigned char *data, size_t size, int *fdp) +{ + struct tls_ctx *tlsctx = ctx; + + PJDLOG_ASSERT(tlsctx != NULL); + PJDLOG_ASSERT(tlsctx->tls_magic == TLS_CTX_MAGIC); + PJDLOG_ASSERT(tlsctx->tls_side == TLS_SIDE_CLIENT || + tlsctx->tls_side == TLS_SIDE_SERVER_WORK); + PJDLOG_ASSERT(tlsctx->tls_sock != NULL); + PJDLOG_ASSERT(tlsctx->tls_wait_called); + PJDLOG_ASSERT(fdp == NULL); + + if (proto_recv(tlsctx->tls_sock, data, size) == -1) + return (errno); + + return (0); +} + +static int +tls_descriptor(const void *ctx) +{ + const struct tls_ctx *tlsctx = ctx; + + PJDLOG_ASSERT(tlsctx != NULL); + PJDLOG_ASSERT(tlsctx->tls_magic == TLS_CTX_MAGIC); + + switch (tlsctx->tls_side) { + case TLS_SIDE_CLIENT: + case TLS_SIDE_SERVER_WORK: + PJDLOG_ASSERT(tlsctx->tls_sock != NULL); + + return (proto_descriptor(tlsctx->tls_sock)); + case TLS_SIDE_SERVER_LISTEN: + PJDLOG_ASSERT(tlsctx->tls_tcp != NULL); + + return (proto_descriptor(tlsctx->tls_tcp)); + default: + PJDLOG_ABORT("Invalid side (%d).", tlsctx->tls_side); + } +} + +static bool +tcp_address_match(const void *ctx, const char *addr) +{ + const struct tls_ctx *tlsctx = ctx; + + PJDLOG_ASSERT(tlsctx != NULL); + PJDLOG_ASSERT(tlsctx->tls_magic == TLS_CTX_MAGIC); + + return (strcmp(tlsctx->tls_raddr, addr) == 0); +} + +static void +tls_local_address(const void *ctx, char *addr, size_t size) +{ + const struct tls_ctx *tlsctx = ctx; + + PJDLOG_ASSERT(tlsctx != NULL); + PJDLOG_ASSERT(tlsctx->tls_magic == TLS_CTX_MAGIC); + PJDLOG_ASSERT(tlsctx->tls_wait_called); + + switch (tlsctx->tls_side) { + case TLS_SIDE_CLIENT: + PJDLOG_ASSERT(tlsctx->tls_sock != NULL); + + PJDLOG_VERIFY(strlcpy(addr, "tls://N/A", size) < size); + break; + case TLS_SIDE_SERVER_WORK: + PJDLOG_ASSERT(tlsctx->tls_sock != NULL); + + PJDLOG_VERIFY(strlcpy(addr, tlsctx->tls_laddr, size) < size); + break; + case TLS_SIDE_SERVER_LISTEN: + PJDLOG_ASSERT(tlsctx->tls_tcp != NULL); + + proto_local_address(tlsctx->tls_tcp, addr, size); + PJDLOG_ASSERT(strncmp(addr, "tcp://", 6) == 0); + /* Replace tcp:// prefix with tls:// */ + bcopy("tls://", addr, 6); + break; + default: + PJDLOG_ABORT("Invalid side (%d).", tlsctx->tls_side); + } +} + +static void +tls_remote_address(const void *ctx, char *addr, size_t size) +{ + const struct tls_ctx *tlsctx = ctx; + + PJDLOG_ASSERT(tlsctx != NULL); + PJDLOG_ASSERT(tlsctx->tls_magic == TLS_CTX_MAGIC); + PJDLOG_ASSERT(tlsctx->tls_wait_called); + + switch (tlsctx->tls_side) { + case TLS_SIDE_CLIENT: + PJDLOG_ASSERT(tlsctx->tls_sock != NULL); + + PJDLOG_VERIFY(strlcpy(addr, "tls://N/A", size) < size); + break; + case TLS_SIDE_SERVER_WORK: + PJDLOG_ASSERT(tlsctx->tls_sock != NULL); + + PJDLOG_VERIFY(strlcpy(addr, tlsctx->tls_raddr, size) < size); + break; + case TLS_SIDE_SERVER_LISTEN: + PJDLOG_ASSERT(tlsctx->tls_tcp != NULL); + + proto_remote_address(tlsctx->tls_tcp, addr, size); + PJDLOG_ASSERT(strncmp(addr, "tcp://", 6) == 0); + /* Replace tcp:// prefix with tls:// */ + bcopy("tls://", addr, 6); + break; + default: + PJDLOG_ABORT("Invalid side (%d).", tlsctx->tls_side); + } +} + +static void +tls_close(void *ctx) +{ + struct tls_ctx *tlsctx = ctx; + + PJDLOG_ASSERT(tlsctx != NULL); + PJDLOG_ASSERT(tlsctx->tls_magic == TLS_CTX_MAGIC); + + if (tlsctx->tls_sock != NULL) { + proto_close(tlsctx->tls_sock); + tlsctx->tls_sock = NULL; + } + if (tlsctx->tls_tcp != NULL) { + proto_close(tlsctx->tls_tcp); + tlsctx->tls_tcp = NULL; + } + tlsctx->tls_side = 0; + tlsctx->tls_magic = 0; + free(tlsctx); +} + +static int +tls_exec(int argc, char *argv[]) +{ + + PJDLOG_ASSERT(argc > 3); + PJDLOG_ASSERT(strcmp(argv[0], "tls") == 0); + + pjdlog_init(atoi(argv[3]) == 0 ? PJDLOG_MODE_SYSLOG : PJDLOG_MODE_STD); + + if (strcmp(argv[2], "client") == 0) { + if (argc != 10) + return (EINVAL); + tls_exec_client(argv[1], atoi(argv[3]), + argv[4][0] == '\0' ? NULL : argv[4], argv[5], argv[6], + argv[7], atoi(argv[8]), atoi(argv[9])); + } else if (strcmp(argv[2], "server") == 0) { + if (argc != 7) + return (EINVAL); + tls_exec_server(argv[1], atoi(argv[3]), argv[4], argv[5], + atoi(argv[6])); + } + return (EINVAL); +} + +static struct proto tls_proto = { + .prt_name = "tls", + .prt_connect = tls_connect, + .prt_connect_wait = tls_connect_wait, + .prt_server = tls_server, + .prt_accept = tls_accept, + .prt_wrap = tls_wrap, + .prt_send = tls_send, + .prt_recv = tls_recv, + .prt_descriptor = tls_descriptor, + .prt_address_match = tcp_address_match, + .prt_local_address = tls_local_address, + .prt_remote_address = tls_remote_address, + .prt_close = tls_close, + .prt_exec = tls_exec +}; + +static __constructor void +tls_ctor(void) +{ + + proto_register(&tls_proto, false); +} diff --git a/bin/auditdistd/proto_uds.c b/bin/auditdistd/proto_uds.c new file mode 100644 index 000000000000..1fdb7a7fc729 --- /dev/null +++ b/bin/auditdistd/proto_uds.c @@ -0,0 +1,364 @@ +/*- + * Copyright (c) 2009-2010 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/proto_uds.c#1 $ + */ + +/* UDS - UNIX Domain Socket */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <sys/types.h> +#include <sys/socket.h> +#include <sys/un.h> + +#include <errno.h> +#include <stdbool.h> +#include <stdint.h> +#include <stdio.h> +#include <string.h> +#include <unistd.h> + +#ifndef HAVE_STRLCPY +#include <compat/strlcpy.h> +#endif + +#include "pjdlog.h" +#include "proto_impl.h" + +#define UDS_CTX_MAGIC 0xd541c +struct uds_ctx { + int uc_magic; + struct sockaddr_un uc_sun; + int uc_fd; + int uc_side; +#define UDS_SIDE_CLIENT 0 +#define UDS_SIDE_SERVER_LISTEN 1 +#define UDS_SIDE_SERVER_WORK 2 + pid_t uc_owner; +}; + +static void uds_close(void *ctx); + +static int +uds_addr(const char *addr, struct sockaddr_un *sunp) +{ + + if (addr == NULL) + return (-1); + + if (strncasecmp(addr, "uds://", 6) == 0) + addr += 6; + else if (strncasecmp(addr, "unix://", 7) == 0) + addr += 7; + else if (addr[0] == '/' && /* If it starts from /... */ + strstr(addr, "://") == NULL)/* ...and there is no prefix... */ + ; /* ...we assume its us. */ + else + return (-1); + + sunp->sun_family = AF_UNIX; + if (strlcpy(sunp->sun_path, addr, sizeof(sunp->sun_path)) >= + sizeof(sunp->sun_path)) { + return (ENAMETOOLONG); + } +#ifdef HAVE_SOCKADDR_STORAGE_SS_LEN + sunp->sun_len = SUN_LEN(sunp); +#endif + + return (0); +} + +static int +uds_common_setup(const char *addr, int side, struct uds_ctx **uctxp) +{ + struct uds_ctx *uctx; + int error; + + uctx = malloc(sizeof(*uctx)); + if (uctx == NULL) + return (errno); + + /* Parse given address. */ + error = uds_addr(addr, &uctx->uc_sun); + if (error != 0) { + free(uctx); + return (error); + } + + uctx->uc_fd = socket(AF_UNIX, SOCK_STREAM, 0); + if (uctx->uc_fd == -1) { + error = errno; + free(uctx); + return (error); + } + + uctx->uc_side = side; + uctx->uc_owner = 0; + uctx->uc_magic = UDS_CTX_MAGIC; + *uctxp = uctx; + + return (0); +} + +static int +uds_connect(const char *srcaddr, const char *dstaddr, int timeout, void **ctxp) +{ + struct uds_ctx *uctx; + int error; + + PJDLOG_ASSERT(dstaddr != NULL); + PJDLOG_ASSERT(timeout >= -1); + + error = uds_common_setup(dstaddr, UDS_SIDE_CLIENT, &uctx); + if (error != 0) + return (error); + + PJDLOG_ASSERT(srcaddr == NULL); + + if (connect(uctx->uc_fd, (struct sockaddr *)&uctx->uc_sun, + sizeof(uctx->uc_sun)) == -1) { + error = errno; + uds_close(uctx); + return (error); + } + + *ctxp = uctx; + + return (0); +} + +static int +uds_connect_wait(void *ctx, int timeout) +{ + struct uds_ctx *uctx = ctx; + + PJDLOG_ASSERT(uctx != NULL); + PJDLOG_ASSERT(uctx->uc_magic == UDS_CTX_MAGIC); + PJDLOG_ASSERT(uctx->uc_side == UDS_SIDE_CLIENT); + PJDLOG_ASSERT(uctx->uc_fd >= 0); + PJDLOG_ASSERT(timeout >= 0); + + return (0); +} + +static int +uds_server(const char *addr, void **ctxp) +{ + struct uds_ctx *uctx; + int error; + + error = uds_common_setup(addr, UDS_SIDE_SERVER_LISTEN, &uctx); + if (error != 0) + return (error); + + (void)unlink(uctx->uc_sun.sun_path); + if (bind(uctx->uc_fd, (struct sockaddr *)&uctx->uc_sun, + sizeof(uctx->uc_sun)) == -1) { + error = errno; + uds_close(uctx); + return (error); + } + uctx->uc_owner = getpid(); + if (listen(uctx->uc_fd, 8) == -1) { + error = errno; + uds_close(uctx); + return (error); + } + + *ctxp = uctx; + + return (0); +} + +static int +uds_accept(void *ctx, void **newctxp) +{ + struct uds_ctx *uctx = ctx; + struct uds_ctx *newuctx; + socklen_t fromlen; + int error; + + PJDLOG_ASSERT(uctx != NULL); + PJDLOG_ASSERT(uctx->uc_magic == UDS_CTX_MAGIC); + PJDLOG_ASSERT(uctx->uc_side == UDS_SIDE_SERVER_LISTEN); + PJDLOG_ASSERT(uctx->uc_fd >= 0); + + newuctx = malloc(sizeof(*newuctx)); + if (newuctx == NULL) + return (errno); + + fromlen = sizeof(newuctx->uc_sun); + newuctx->uc_fd = accept(uctx->uc_fd, + (struct sockaddr *)&newuctx->uc_sun, &fromlen); + if (newuctx->uc_fd < 0) { + error = errno; + free(newuctx); + return (error); + } + + newuctx->uc_side = UDS_SIDE_SERVER_WORK; + newuctx->uc_magic = UDS_CTX_MAGIC; + *newctxp = newuctx; + + return (0); +} + +static int +uds_send(void *ctx, const unsigned char *data, size_t size, int fd) +{ + struct uds_ctx *uctx = ctx; + + PJDLOG_ASSERT(uctx != NULL); + PJDLOG_ASSERT(uctx->uc_magic == UDS_CTX_MAGIC); + PJDLOG_ASSERT(uctx->uc_fd >= 0); + + return (proto_common_send(uctx->uc_fd, data, size, fd)); +} + +static int +uds_recv(void *ctx, unsigned char *data, size_t size, int *fdp) +{ + struct uds_ctx *uctx = ctx; + + PJDLOG_ASSERT(uctx != NULL); + PJDLOG_ASSERT(uctx->uc_magic == UDS_CTX_MAGIC); + PJDLOG_ASSERT(uctx->uc_fd >= 0); + + return (proto_common_recv(uctx->uc_fd, data, size, fdp)); +} + +static int +uds_descriptor(const void *ctx) +{ + const struct uds_ctx *uctx = ctx; + + PJDLOG_ASSERT(uctx != NULL); + PJDLOG_ASSERT(uctx->uc_magic == UDS_CTX_MAGIC); + + return (uctx->uc_fd); +} + +static void +uds_local_address(const void *ctx, char *addr, size_t size) +{ + const struct uds_ctx *uctx = ctx; + struct sockaddr_un sun; + socklen_t sunlen; + + PJDLOG_ASSERT(uctx != NULL); + PJDLOG_ASSERT(uctx->uc_magic == UDS_CTX_MAGIC); + PJDLOG_ASSERT(addr != NULL); + + sunlen = sizeof(sun); + if (getsockname(uctx->uc_fd, (struct sockaddr *)&sun, &sunlen) < 0) { + PJDLOG_VERIFY(strlcpy(addr, "N/A", size) < size); + return; + } + PJDLOG_ASSERT(sun.sun_family == AF_UNIX); + if (sun.sun_path[0] == '\0') { + PJDLOG_VERIFY(strlcpy(addr, "N/A", size) < size); + return; + } + PJDLOG_VERIFY(snprintf(addr, size, "uds://%s", sun.sun_path) < (ssize_t)size); +} + +static void +uds_remote_address(const void *ctx, char *addr, size_t size) +{ + const struct uds_ctx *uctx = ctx; + struct sockaddr_un sun; + socklen_t sunlen; + + PJDLOG_ASSERT(uctx != NULL); + PJDLOG_ASSERT(uctx->uc_magic == UDS_CTX_MAGIC); + PJDLOG_ASSERT(addr != NULL); + + sunlen = sizeof(sun); + if (getpeername(uctx->uc_fd, (struct sockaddr *)&sun, &sunlen) < 0) { + PJDLOG_VERIFY(strlcpy(addr, "N/A", size) < size); + return; + } + PJDLOG_ASSERT(sun.sun_family == AF_UNIX); + if (sun.sun_path[0] == '\0') { + PJDLOG_VERIFY(strlcpy(addr, "N/A", size) < size); + return; + } + snprintf(addr, size, "uds://%s", sun.sun_path); +} + +static void +uds_close(void *ctx) +{ + struct uds_ctx *uctx = ctx; + + PJDLOG_ASSERT(uctx != NULL); + PJDLOG_ASSERT(uctx->uc_magic == UDS_CTX_MAGIC); + + if (uctx->uc_fd >= 0) + close(uctx->uc_fd); + /* + * Unlink the socket only if we are the owner and this is descriptor + * we listen on. + */ + if (uctx->uc_side == UDS_SIDE_SERVER_LISTEN && + uctx->uc_owner == getpid()) { + PJDLOG_ASSERT(uctx->uc_sun.sun_path[0] != '\0'); + if (unlink(uctx->uc_sun.sun_path) == -1) { + pjdlog_errno(LOG_WARNING, + "Unable to unlink socket file %s", + uctx->uc_sun.sun_path); + } + } + uctx->uc_owner = 0; + uctx->uc_magic = 0; + free(uctx); +} + +static struct proto uds_proto = { + .prt_name = "uds", + .prt_connect = uds_connect, + .prt_connect_wait = uds_connect_wait, + .prt_server = uds_server, + .prt_accept = uds_accept, + .prt_send = uds_send, + .prt_recv = uds_recv, + .prt_descriptor = uds_descriptor, + .prt_local_address = uds_local_address, + .prt_remote_address = uds_remote_address, + .prt_close = uds_close +}; + +static __constructor void +uds_ctor(void) +{ + + proto_register(&uds_proto, false); +} diff --git a/bin/auditdistd/receiver.c b/bin/auditdistd/receiver.c new file mode 100644 index 000000000000..fe08a3c332a3 --- /dev/null +++ b/bin/auditdistd/receiver.c @@ -0,0 +1,715 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/receiver.c#1 $ + */ + +#include "config.h" + +#include <sys/param.h> +#if defined(HAVE_SYS_ENDIAN_H) && defined(HAVE_BSWAP) +#include <sys/endian.h> +#else /* !HAVE_SYS_ENDIAN_H || !HAVE_BSWAP */ +#ifdef HAVE_MACHINE_ENDIAN_H +#include <machine/endian.h> +#else /* !HAVE_MACHINE_ENDIAN_H */ +#ifdef HAVE_ENDIAN_H +#include <endian.h> +#else /* !HAVE_ENDIAN_H */ +#error "No supported endian.h" +#endif /* !HAVE_ENDIAN_H */ +#endif /* !HAVE_MACHINE_ENDIAN_H */ +#include <compat/endian.h> +#endif /* !HAVE_SYS_ENDIAN_H || !HAVE_BSWAP */ +#include <sys/queue.h> +#include <sys/stat.h> +#include <sys/time.h> + +#include <err.h> +#include <errno.h> +#include <fcntl.h> +#ifdef HAVE_LIBUTIL_H +#include <libutil.h> +#endif +#include <pthread.h> +#include <pwd.h> +#include <signal.h> +#include <stdint.h> +#include <stdio.h> +#include <string.h> +#include <sysexits.h> +#include <unistd.h> + +#ifndef HAVE_STRLCPY +#include <compat/strlcpy.h> +#endif +#ifndef HAVE_FSTATAT +#include "fstatat.h" +#endif +#ifndef HAVE_OPENAT +#include "openat.h" +#endif +#ifndef HAVE_RENAMEAT +#include "renameat.h" +#endif + +#include <pjdlog.h> + +#include "auditdistd.h" +#include "proto.h" +#include "sandbox.h" +#include "subr.h" +#include "synch.h" +#include "trail.h" + +static struct adist_config *adcfg; +static struct adist_host *adhost; + +static TAILQ_HEAD(, adreq) adist_free_list; +static pthread_mutex_t adist_free_list_lock; +static pthread_cond_t adist_free_list_cond; +static TAILQ_HEAD(, adreq) adist_disk_list; +static pthread_mutex_t adist_disk_list_lock; +static pthread_cond_t adist_disk_list_cond; +static TAILQ_HEAD(, adreq) adist_send_list; +static pthread_mutex_t adist_send_list_lock; +static pthread_cond_t adist_send_list_cond; + +static void +adreq_clear(struct adreq *adreq) +{ + + adreq->adr_error = -1; + adreq->adr_byteorder = ADIST_BYTEORDER_UNDEFINED; + adreq->adr_cmd = ADIST_CMD_UNDEFINED; + adreq->adr_seq = 0; + adreq->adr_datasize = 0; +} + +static void +init_environment(void) +{ + struct adreq *adreq; + unsigned int ii; + + TAILQ_INIT(&adist_free_list); + mtx_init(&adist_free_list_lock); + cv_init(&adist_free_list_cond); + TAILQ_INIT(&adist_disk_list); + mtx_init(&adist_disk_list_lock); + cv_init(&adist_disk_list_cond); + TAILQ_INIT(&adist_send_list); + mtx_init(&adist_send_list_lock); + cv_init(&adist_send_list_cond); + + for (ii = 0; ii < ADIST_QUEUE_SIZE; ii++) { + adreq = malloc(sizeof(*adreq) + ADIST_BUF_SIZE); + if (adreq == NULL) { + pjdlog_exitx(EX_TEMPFAIL, + "Unable to allocate %zu bytes of memory for adreq object.", + sizeof(*adreq) + ADIST_BUF_SIZE); + } + adreq_clear(adreq); + TAILQ_INSERT_TAIL(&adist_free_list, adreq, adr_next); + } +} + +static void +adreq_decode_and_validate_header(struct adreq *adreq) +{ + + /* Byte-swap only is the sender is using different byte order. */ + if (adreq->adr_byteorder != ADIST_BYTEORDER) { + adreq->adr_byteorder = ADIST_BYTEORDER; + adreq->adr_seq = bswap64(adreq->adr_seq); + adreq->adr_datasize = bswap32(adreq->adr_datasize); + } + + /* Validate packet header. */ + + if (adreq->adr_datasize > ADIST_BUF_SIZE) { + pjdlog_exitx(EX_PROTOCOL, "Invalid datasize received (%ju).", + (uintmax_t)adreq->adr_datasize); + } + + switch (adreq->adr_cmd) { + case ADIST_CMD_OPEN: + case ADIST_CMD_APPEND: + case ADIST_CMD_CLOSE: + if (adreq->adr_datasize == 0) { + pjdlog_exitx(EX_PROTOCOL, + "Invalid datasize received (%ju).", + (uintmax_t)adreq->adr_datasize); + } + break; + case ADIST_CMD_KEEPALIVE: + case ADIST_CMD_ERROR: + if (adreq->adr_datasize > 0) { + pjdlog_exitx(EX_PROTOCOL, + "Invalid datasize received (%ju).", + (uintmax_t)adreq->adr_datasize); + } + break; + default: + pjdlog_exitx(EX_PROTOCOL, "Invalid command received (%hhu).", + adreq->adr_cmd); + } +} + +static void +adreq_validate_data(const struct adreq *adreq) +{ + + /* Validate packet data. */ + + switch (adreq->adr_cmd) { + case ADIST_CMD_OPEN: + case ADIST_CMD_CLOSE: + /* + * File name must end up with '\0' and there must be no '\0' + * in the middle. + */ + if (adreq->adr_data[adreq->adr_datasize - 1] != '\0' || + strchr(adreq->adr_data, '\0') != + (const char *)adreq->adr_data + adreq->adr_datasize - 1) { + pjdlog_exitx(EX_PROTOCOL, + "Invalid file name received."); + } + break; + } +} + +/* + * Thread receives requests from the sender. + */ +static void * +recv_thread(void *arg __unused) +{ + struct adreq *adreq; + + for (;;) { + pjdlog_debug(3, "recv: Taking free request."); + QUEUE_TAKE(adreq, &adist_free_list, 0); + pjdlog_debug(3, "recv: (%p) Got request.", adreq); + + if (proto_recv(adhost->adh_remote, &adreq->adr_packet, + sizeof(adreq->adr_packet)) == -1) { + pjdlog_exit(EX_TEMPFAIL, + "Unable to receive request header"); + } + adreq_decode_and_validate_header(adreq); + + switch (adreq->adr_cmd) { + case ADIST_CMD_KEEPALIVE: + adreq->adr_error = 0; + adreq_log(LOG_DEBUG, 2, -1, adreq, + "recv: (%p) Got request header: ", adreq); + pjdlog_debug(3, + "recv: (%p) Moving request to the send queue.", + adreq); + QUEUE_INSERT(adreq, &adist_send_list); + continue; + case ADIST_CMD_ERROR: + pjdlog_error("An error occured on the sender while reading \"%s/%s\".", + adhost->adh_directory, adhost->adh_trail_name); + adreq_log(LOG_DEBUG, 2, ADIST_ERROR_READ, adreq, + "recv: (%p) Got request header: ", adreq); + pjdlog_debug(3, + "recv: (%p) Moving request to the send queue.", + adreq); + QUEUE_INSERT(adreq, &adist_disk_list); + continue; + case ADIST_CMD_OPEN: + case ADIST_CMD_APPEND: + case ADIST_CMD_CLOSE: + if (proto_recv(adhost->adh_remote, adreq->adr_data, + adreq->adr_datasize) == -1) { + pjdlog_exit(EX_TEMPFAIL, + "Unable to receive request data"); + } + adreq_validate_data(adreq); + adreq_log(LOG_DEBUG, 2, -1, adreq, + "recv: (%p) Got request header: ", adreq); + pjdlog_debug(3, + "recv: (%p) Moving request to the disk queue.", + adreq); + QUEUE_INSERT(adreq, &adist_disk_list); + break; + default: + PJDLOG_ABORT("Invalid condition."); + } + } + /* NOTREACHED */ + return (NULL); +} + +/* + * Function that opens trail file requested by the sender. + * If the file already exist, it has to be the most recent file and it can + * only be open for append. + * If the file doesn't already exist, it has to be "older" than all existing + * files. + */ +static int +receiver_open(const char *filename) +{ + int fd; + + /* + * Previous file should be closed by now. Sending OPEN request without + * sending CLOSE for the previous file is a sender bug. + */ + if (adhost->adh_trail_fd != -1) { + pjdlog_error("Sender requested opening file \"%s\" without first closing \"%s\".", + filename, adhost->adh_trail_name); + return (ADIST_ERROR_WRONG_ORDER); + } + + if (!trail_validate_name(filename, NULL)) { + pjdlog_error("Sender wants to open file \"%s\", which has invalid name.", + filename); + return (ADIST_ERROR_INVALID_NAME); + } + + switch (trail_name_compare(filename, adhost->adh_trail_name)) { + case TRAIL_RENAMED: + if (!trail_is_not_terminated(adhost->adh_trail_name)) { + pjdlog_error("Terminated trail \"%s/%s\" was unterminated on the sender as \"%s/%s\"?", + adhost->adh_directory, adhost->adh_trail_name, + adhost->adh_directory, filename); + return (ADIST_ERROR_INVALID_NAME); + } + if (renameat(adhost->adh_trail_dirfd, adhost->adh_trail_name, + adhost->adh_trail_dirfd, filename) == -1) { + pjdlog_errno(LOG_ERR, + "Unable to rename file \"%s/%s\" to \"%s/%s\"", + adhost->adh_directory, adhost->adh_trail_name, + adhost->adh_directory, filename); + PJDLOG_ASSERT(errno > 0); + return (ADIST_ERROR_RENAME); + } + pjdlog_debug(1, "Renamed file \"%s/%s\" to \"%s/%s\".", + adhost->adh_directory, adhost->adh_trail_name, + adhost->adh_directory, filename); + /* FALLTHROUGH */ + case TRAIL_IDENTICAL: + /* Opening existing file. */ + fd = openat(adhost->adh_trail_dirfd, filename, + O_WRONLY | O_APPEND | O_NOFOLLOW); + if (fd == -1) { + pjdlog_errno(LOG_ERR, + "Unable to open file \"%s/%s\" for append", + adhost->adh_directory, filename); + PJDLOG_ASSERT(errno > 0); + return (ADIST_ERROR_OPEN); + } + pjdlog_debug(1, "Opened file \"%s/%s\".", + adhost->adh_directory, filename); + break; + case TRAIL_NEWER: + /* Opening new file. */ + fd = openat(adhost->adh_trail_dirfd, filename, + O_WRONLY | O_CREAT | O_EXCL | O_NOFOLLOW, 0600); + if (fd == -1) { + pjdlog_errno(LOG_ERR, + "Unable to create file \"%s/%s\"", + adhost->adh_directory, filename); + PJDLOG_ASSERT(errno > 0); + return (ADIST_ERROR_CREATE); + } + pjdlog_debug(1, "Created file \"%s/%s\".", + adhost->adh_directory, filename); + break; + case TRAIL_OLDER: + /* Trying to open old file. */ + pjdlog_error("Sender wants to open an old file \"%s\".", filename); + return (ADIST_ERROR_OPEN_OLD); + default: + PJDLOG_ABORT("Unknown return value from trail_name_compare()."); + } + PJDLOG_VERIFY(strlcpy(adhost->adh_trail_name, filename, + sizeof(adhost->adh_trail_name)) < sizeof(adhost->adh_trail_name)); + adhost->adh_trail_fd = fd; + return (0); +} + +/* + * Function appends data to the trail file that is currently open. + */ +static int +receiver_append(const unsigned char *data, size_t size) +{ + ssize_t done; + size_t osize; + + /* We should have opened trail file. */ + if (adhost->adh_trail_fd == -1) { + pjdlog_error("Sender requested append without first opening file."); + return (ADIST_ERROR_WRONG_ORDER); + } + + osize = size; + while (size > 0) { + done = write(adhost->adh_trail_fd, data, size); + if (done == -1) { + if (errno == EINTR) + continue; + pjdlog_errno(LOG_ERR, "Write to \"%s/%s\" failed", + adhost->adh_directory, adhost->adh_trail_name); + PJDLOG_ASSERT(errno > 0); + return (ADIST_ERROR_WRITE); + } + pjdlog_debug(3, "Wrote %zd bytes into \"%s/%s\".", done, + adhost->adh_directory, adhost->adh_trail_name); + size -= done; + } + pjdlog_debug(2, "Appended %zu bytes to file \"%s/%s\".", + osize, adhost->adh_directory, adhost->adh_trail_name); + return (0); +} + +static int +receiver_close(const char *filename) +{ + + /* We should have opened trail file. */ + if (adhost->adh_trail_fd == -1) { + pjdlog_error("Sender requested closing file without first opening it."); + return (ADIST_ERROR_WRONG_ORDER); + } + + /* Validate if we can do the rename. */ + if (!trail_validate_name(adhost->adh_trail_name, filename)) { + pjdlog_error("Sender wants to close file \"%s\" using name \"%s\".", + adhost->adh_trail_name, filename); + return (ADIST_ERROR_INVALID_NAME); + } + + PJDLOG_VERIFY(close(adhost->adh_trail_fd) == 0); + adhost->adh_trail_fd = -1; + + pjdlog_debug(1, "Closed file \"%s/%s\".", adhost->adh_directory, + adhost->adh_trail_name); + + if (strcmp(adhost->adh_trail_name, filename) == 0) { + /* File name didn't change, we are done here. */ + return (0); + } + + if (renameat(adhost->adh_trail_dirfd, adhost->adh_trail_name, + adhost->adh_trail_dirfd, filename) == -1) { + pjdlog_errno(LOG_ERR, "Unable to rename \"%s\" to \"%s\"", + adhost->adh_trail_name, filename); + PJDLOG_ASSERT(errno > 0); + return (ADIST_ERROR_RENAME); + } + pjdlog_debug(1, "Renamed file \"%s/%s\" to \"%s/%s\".", + adhost->adh_directory, adhost->adh_trail_name, + adhost->adh_directory, filename); + PJDLOG_VERIFY(strlcpy(adhost->adh_trail_name, filename, + sizeof(adhost->adh_trail_name)) < sizeof(adhost->adh_trail_name)); + + return (0); +} + +static int +receiver_error(void) +{ + + /* We should have opened trail file. */ + if (adhost->adh_trail_fd == -1) { + pjdlog_error("Sender send read error, but file is not open."); + return (ADIST_ERROR_WRONG_ORDER); + } + + PJDLOG_VERIFY(close(adhost->adh_trail_fd) == 0); + adhost->adh_trail_fd = -1; + + pjdlog_debug(1, "Closed file \"%s/%s\".", adhost->adh_directory, + adhost->adh_trail_name); + + return (0); +} + +static void * +disk_thread(void *arg __unused) +{ + struct adreq *adreq; + + for (;;) { + pjdlog_debug(3, "disk: Taking request."); + QUEUE_TAKE(adreq, &adist_disk_list, 0); + adreq_log(LOG_DEBUG, 3, -1, adreq, "disk: (%p) Got request: ", + adreq); + /* Handle the actual request. */ + switch (adreq->adr_cmd) { + case ADIST_CMD_OPEN: + adreq->adr_error = receiver_open(adreq->adr_data); + break; + case ADIST_CMD_APPEND: + adreq->adr_error = receiver_append(adreq->adr_data, + adreq->adr_datasize); + break; + case ADIST_CMD_CLOSE: + adreq->adr_error = receiver_close(adreq->adr_data); + break; + case ADIST_CMD_ERROR: + adreq->adr_error = receiver_error(); + break; + default: + PJDLOG_ABORT("Unexpected command (cmd=%hhu).", + adreq->adr_cmd); + } + if (adreq->adr_error != 0) { + adreq_log(LOG_ERR, 0, adreq->adr_error, adreq, + "Request failed: "); + } + pjdlog_debug(3, "disk: (%p) Moving request to the send queue.", + adreq); + QUEUE_INSERT(adreq, &adist_send_list); + } + /* NOTREACHED */ + return (NULL); +} + +/* + * Thread sends requests back to primary node. + */ +static void * +send_thread(void *arg __unused) +{ + struct adreq *adreq; + struct adrep adrep; + + for (;;) { + pjdlog_debug(3, "send: Taking request."); + QUEUE_TAKE(adreq, &adist_send_list, 0); + adreq_log(LOG_DEBUG, 3, -1, adreq, "send: (%p) Got request: ", + adreq); + adrep.adrp_byteorder = ADIST_BYTEORDER; + adrep.adrp_seq = adreq->adr_seq; + adrep.adrp_error = adreq->adr_error; + if (proto_send(adhost->adh_remote, &adrep, + sizeof(adrep)) == -1) { + pjdlog_exit(EX_TEMPFAIL, "Unable to send reply"); + } + pjdlog_debug(3, "send: (%p) Moving request to the free queue.", + adreq); + adreq_clear(adreq); + QUEUE_INSERT(adreq, &adist_free_list); + } + /* NOTREACHED */ + return (NULL); +} + +static void +receiver_directory_create(void) +{ + struct passwd *pw; + + /* + * According to getpwnam(3) we have to clear errno before calling the + * function to be able to distinguish between an error and missing + * entry (with is not treated as error by getpwnam(3)). + */ + errno = 0; + pw = getpwnam(ADIST_USER); + if (pw == NULL) { + if (errno != 0) { + pjdlog_exit(EX_NOUSER, + "Unable to find info about '%s' user", ADIST_USER); + } else { + pjdlog_exitx(EX_NOUSER, "User '%s' doesn't exist.", + ADIST_USER); + } + } + + if (mkdir(adhost->adh_directory, 0700) == -1) { + pjdlog_exit(EX_OSFILE, "Unable to create directory \"%s\"", + adhost->adh_directory); + } + if (chown(adhost->adh_directory, pw->pw_uid, pw->pw_gid) == -1) { + pjdlog_errno(LOG_ERR, + "Unable to change owner of the directory \"%s\"", + adhost->adh_directory); + (void)rmdir(adhost->adh_directory); + exit(EX_OSFILE); + } +} + +static void +receiver_directory_open(void) +{ + +#ifdef HAVE_FDOPENDIR + adhost->adh_trail_dirfd = open(adhost->adh_directory, + O_RDONLY | O_DIRECTORY); + if (adhost->adh_trail_dirfd == -1) { + if (errno == ENOENT) { + receiver_directory_create(); + adhost->adh_trail_dirfd = open(adhost->adh_directory, + O_RDONLY | O_DIRECTORY); + } + if (adhost->adh_trail_dirfd == -1) { + pjdlog_exit(EX_CONFIG, + "Unable to open directory \"%s\"", + adhost->adh_directory); + } + } + adhost->adh_trail_dirfp = fdopendir(adhost->adh_trail_dirfd); + if (adhost->adh_trail_dirfp == NULL) { + pjdlog_exit(EX_CONFIG, "Unable to fdopen directory \"%s\"", + adhost->adh_directory); + } +#else + struct stat sb; + + if (stat(adhost->adh_directory, &sb) == -1) { + if (errno == ENOENT) { + receiver_directory_create(); + } else { + pjdlog_exit(EX_CONFIG, + "Unable to stat directory \"%s\"", + adhost->adh_directory); + } + } + adhost->adh_trail_dirfp = opendir(adhost->adh_directory); + if (adhost->adh_trail_dirfp == NULL) { + pjdlog_exit(EX_CONFIG, "Unable to open directory \"%s\"", + adhost->adh_directory); + } + adhost->adh_trail_dirfd = dirfd(adhost->adh_trail_dirfp); +#endif +} + +static void +receiver_connect(void) +{ + uint64_t trail_size; + struct stat sb; + + PJDLOG_ASSERT(adhost->adh_trail_dirfp != NULL); + + trail_last(adhost->adh_trail_dirfp, adhost->adh_trail_name, + sizeof(adhost->adh_trail_name)); + + if (adhost->adh_trail_name[0] == '\0') { + trail_size = 0; + } else { + if (fstatat(adhost->adh_trail_dirfd, adhost->adh_trail_name, + &sb, AT_SYMLINK_NOFOLLOW) == -1) { + pjdlog_exit(EX_CONFIG, "Unable to stat \"%s/%s\"", + adhost->adh_directory, adhost->adh_trail_name); + } + if (!S_ISREG(sb.st_mode)) { + pjdlog_exitx(EX_CONFIG, + "File \"%s/%s\" is not a regular file.", + adhost->adh_directory, adhost->adh_trail_name); + } + trail_size = sb.st_size; + } + trail_size = htole64(trail_size); + if (proto_send(adhost->adh_remote, &trail_size, + sizeof(trail_size)) == -1) { + pjdlog_exit(EX_TEMPFAIL, + "Unable to send size of the most recent trail file"); + } + if (proto_send(adhost->adh_remote, adhost->adh_trail_name, + sizeof(adhost->adh_trail_name)) == -1) { + pjdlog_exit(EX_TEMPFAIL, + "Unable to send name of the most recent trail file"); + } +} + +void +adist_receiver(struct adist_config *config, struct adist_host *adh) +{ + sigset_t mask; + pthread_t td; + pid_t pid; + int error, mode, debuglevel; + + pid = fork(); + if (pid == -1) { + pjdlog_errno(LOG_ERR, "Unable to fork"); + proto_close(adh->adh_remote); + adh->adh_remote = NULL; + return; + } + + if (pid > 0) { + /* This is parent. */ + proto_close(adh->adh_remote); + adh->adh_remote = NULL; + adh->adh_worker_pid = pid; + return; + } + + adcfg = config; + adhost = adh; + mode = pjdlog_mode_get(); + debuglevel = pjdlog_debug_get(); + + descriptors_cleanup(adhost); + +// descriptors_assert(adhost, mode); + + pjdlog_init(mode); + pjdlog_debug_set(debuglevel); + pjdlog_prefix_set("[%s] (%s) ", adhost->adh_name, + role2str(adhost->adh_role)); +#ifdef HAVE_SETPROCTITLE + setproctitle("%s (%s)", adhost->adh_name, role2str(adhost->adh_role)); +#endif + + PJDLOG_VERIFY(sigemptyset(&mask) == 0); + PJDLOG_VERIFY(sigprocmask(SIG_SETMASK, &mask, NULL) == 0); + + /* Error in setting timeout is not critical, but why should it fail? */ + if (proto_timeout(adhost->adh_remote, adcfg->adc_timeout) == -1) + pjdlog_errno(LOG_WARNING, "Unable to set connection timeout"); + + init_environment(); + + adhost->adh_trail_fd = -1; + receiver_directory_open(); + + if (sandbox(ADIST_USER, true, "auditdistd: %s (%s)", + role2str(adhost->adh_role), adhost->adh_name) != 0) { + exit(EX_CONFIG); + } + pjdlog_info("Privileges successfully dropped."); + + receiver_connect(); + + error = pthread_create(&td, NULL, recv_thread, adhost); + PJDLOG_ASSERT(error == 0); + error = pthread_create(&td, NULL, disk_thread, adhost); + PJDLOG_ASSERT(error == 0); + (void)send_thread(adhost); +} diff --git a/bin/auditdistd/renameat.h b/bin/auditdistd/renameat.h new file mode 100644 index 000000000000..a6a67f8513db --- /dev/null +++ b/bin/auditdistd/renameat.h @@ -0,0 +1,68 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/renameat.h#1 $ + */ + +#ifndef _RENAMEAT_H_ +#define _RENAMEAT_H_ + +#include <stdio.h> +#include <unistd.h> + +static int +renameat(int fromfd, const char *from, int tofd, const char *to) +{ + int cfd, error, ret; + + if (fromfd != tofd) { + errno = EINVAL; + return (-1); + } + + cfd = open(".", O_RDONLY | O_DIRECTORY); + if (cfd == -1) + return (-1); + + if (fchdir(fromfd) == -1) { + error = errno; + (void)close(cfd); + errno = error; + return (-1); + } + + ret = rename(from, to); + + error = errno; + (void)fchdir(cfd); + (void)close(cfd); + errno = error; + return (ret); +} + +#endif /* !_RENAMEAT_H_ */ diff --git a/bin/auditdistd/sandbox.c b/bin/auditdistd/sandbox.c new file mode 100644 index 000000000000..ada6788f8d25 --- /dev/null +++ b/bin/auditdistd/sandbox.c @@ -0,0 +1,237 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/sandbox.c#1 $ + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <sys/param.h> +#ifdef HAVE_JAIL +#include <sys/jail.h> +#endif +#ifdef HAVE_CAP_ENTER +#include <sys/capability.h> +#endif + +#include <errno.h> +#include <pwd.h> +#include <stdarg.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <strings.h> +#include <unistd.h> + +#include <pjdlog.h> + +#include "sandbox.h" + +static int +groups_compare(const void *grp0, const void *grp1) +{ + gid_t gr0 = *(const gid_t *)grp0; + gid_t gr1 = *(const gid_t *)grp1; + + return (gr0 <= gr1 ? (gr0 < gr1 ? -1 : 0) : 1); + +} + +int +sandbox(const char *user, bool capsicum, const char *fmt, ...) +{ +#ifdef HAVE_JAIL + struct jail jailst; + char *jailhost; + va_list ap; +#endif + struct passwd *pw; + uid_t ruid, euid; + gid_t rgid, egid; +#ifdef HAVE_GETRESUID + uid_t suid; +#endif +#ifdef HAVE_GETRESGID + gid_t sgid; +#endif + gid_t *groups, *ggroups; + bool jailed; + int ngroups, ret; + + PJDLOG_ASSERT(user != NULL); + PJDLOG_ASSERT(fmt != NULL); + + ret = -1; + groups = NULL; + ggroups = NULL; + + /* + * According to getpwnam(3) we have to clear errno before calling the + * function to be able to distinguish between an error and missing + * entry (with is not treated as error by getpwnam(3)). + */ + errno = 0; + pw = getpwnam(user); + if (pw == NULL) { + if (errno != 0) { + pjdlog_errno(LOG_ERR, + "Unable to find info about '%s' user", user); + goto out; + } else { + pjdlog_error("'%s' user doesn't exist.", user); + errno = ENOENT; + goto out; + } + } + + ngroups = sysconf(_SC_NGROUPS_MAX); + if (ngroups == -1) { + pjdlog_errno(LOG_WARNING, + "Unable to obtain maximum number of groups"); + ngroups = NGROUPS_MAX; + } + ngroups++; /* For base gid. */ + groups = malloc(sizeof(groups[0]) * ngroups); + if (groups == NULL) { + pjdlog_error("Unable to allocate memory for %d groups.", + ngroups); + goto out; + } + if (getgrouplist(user, pw->pw_gid, groups, &ngroups) == -1) { + pjdlog_error("Unable to obtain groups of user %s.", user); + goto out; + } + +#ifdef HAVE_JAIL + va_start(ap, fmt); + (void)vasprintf(&jailhost, fmt, ap); + va_end(ap); + if (jailhost == NULL) { + pjdlog_error("Unable to allocate memory for jail host name."); + goto out; + } + bzero(&jailst, sizeof(jailst)); + jailst.version = JAIL_API_VERSION; + jailst.path = pw->pw_dir; + jailst.hostname = jailhost; + if (jail(&jailst) >= 0) { + jailed = true; + } else { + jailed = false; + pjdlog_errno(LOG_WARNING, + "Unable to jail to directory %s", pw->pw_dir); + } + free(jailhost); +#else /* !HAVE_JAIL */ + jailed = false; +#endif /* !HAVE_JAIL */ + + if (!jailed) { + if (chroot(pw->pw_dir) == -1) { + pjdlog_errno(LOG_ERR, + "Unable to change root directory to %s", + pw->pw_dir); + goto out; + } + } + PJDLOG_VERIFY(chdir("/") == 0); + + if (setgroups(ngroups, groups) == -1) { + pjdlog_errno(LOG_ERR, "Unable to set groups"); + goto out; + } + if (setgid(pw->pw_gid) == -1) { + pjdlog_errno(LOG_ERR, "Unable to set gid to %u", + (unsigned int)pw->pw_gid); + goto out; + } + if (setuid(pw->pw_uid) == -1) { + pjdlog_errno(LOG_ERR, "Unable to set uid to %u", + (unsigned int)pw->pw_uid); + goto out; + } + +#ifdef HAVE_CAP_ENTER + if (capsicum) { + capsicum = (cap_enter() == 0); + if (!capsicum) { + pjdlog_common(LOG_DEBUG, 1, errno, + "Unable to sandbox using capsicum"); + } + } +#else /* !HAVE_CAP_ENTER */ + capsicum = false; +#endif /* !HAVE_CAP_ENTER */ + + /* + * Better be sure that everything succeeded. + */ +#ifdef HAVE_GETRESUID + PJDLOG_VERIFY(getresuid(&ruid, &euid, &suid) == 0); + PJDLOG_VERIFY(suid == pw->pw_uid); +#else + ruid = getuid(); + euid = geteuid(); +#endif + PJDLOG_VERIFY(ruid == pw->pw_uid); + PJDLOG_VERIFY(euid == pw->pw_uid); +#ifdef HAVE_GETRESGID + PJDLOG_VERIFY(getresgid(&rgid, &egid, &sgid) == 0); + PJDLOG_VERIFY(sgid == pw->pw_gid); +#else + rgid = getgid(); + egid = getegid(); +#endif + PJDLOG_VERIFY(rgid == pw->pw_gid); + PJDLOG_VERIFY(egid == pw->pw_gid); + PJDLOG_VERIFY(getgroups(0, NULL) == ngroups); + ggroups = malloc(sizeof(ggroups[0]) * ngroups); + if (ggroups == NULL) { + pjdlog_error("Unable to allocate memory for %d groups.", + ngroups); + goto out; + } + PJDLOG_VERIFY(getgroups(ngroups, ggroups) == ngroups); + qsort(groups, (size_t)ngroups, sizeof(groups[0]), groups_compare); + qsort(ggroups, (size_t)ngroups, sizeof(ggroups[0]), groups_compare); + PJDLOG_VERIFY(bcmp(groups, ggroups, sizeof(groups[0]) * ngroups) == 0); + + pjdlog_debug(1, + "Privileges successfully dropped using %s%s+setgid+setuid.", + capsicum ? "capsicum+" : "", jailed ? "jail" : "chroot"); + + ret = 0; +out: + if (groups != NULL) + free(groups); + if (ggroups != NULL) + free(ggroups); + return (ret); +} diff --git a/bin/auditdistd/sandbox.h b/bin/auditdistd/sandbox.h new file mode 100644 index 000000000000..2dc59e4b0365 --- /dev/null +++ b/bin/auditdistd/sandbox.h @@ -0,0 +1,39 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/sandbox.h#1 $ + */ + +#ifndef _SANDBOX_H_ +#define _SANDBOX_H_ + +#include <stdbool.h> + +int sandbox(const char *user, bool capsicum, const char *fmt, ...); + +#endif /* !_SANDBOX_H_ */ diff --git a/bin/auditdistd/sender.c b/bin/auditdistd/sender.c new file mode 100644 index 000000000000..4aac864a1ef7 --- /dev/null +++ b/bin/auditdistd/sender.c @@ -0,0 +1,839 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/sender.c#1 $ + */ + +#include "config.h" + +#include <sys/param.h> +#if defined(HAVE_SYS_ENDIAN_H) && defined(HAVE_BSWAP) +#include <sys/endian.h> +#else /* !HAVE_SYS_ENDIAN_H || !HAVE_BSWAP */ +#ifdef HAVE_MACHINE_ENDIAN_H +#include <machine/endian.h> +#else /* !HAVE_MACHINE_ENDIAN_H */ +#ifdef HAVE_ENDIAN_H +#include <endian.h> +#else /* !HAVE_ENDIAN_H */ +#error "No supported endian.h" +#endif /* !HAVE_ENDIAN_H */ +#endif /* !HAVE_MACHINE_ENDIAN_H */ +#include <compat/endian.h> +#endif /* !HAVE_SYS_ENDIAN_H || !HAVE_BSWAP */ +#include <sys/queue.h> +#include <sys/stat.h> +#include <sys/wait.h> + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> + +#include <ctype.h> +#include <dirent.h> +#include <err.h> +#include <errno.h> +#include <fcntl.h> +#ifdef HAVE_LIBUTIL_H +#include <libutil.h> +#endif +#include <signal.h> +#include <string.h> +#include <strings.h> + +#include <openssl/hmac.h> + +#ifndef HAVE_SIGTIMEDWAIT +#include "sigtimedwait.h" +#endif + +#include <pjdlog.h> + +#include "auditdistd.h" +#include "proto.h" +#include "sandbox.h" +#include "subr.h" +#include "synch.h" +#include "trail.h" + +static struct adist_config *adcfg; +static struct adist_host *adhost; + +static pthread_rwlock_t adist_remote_lock; +static pthread_mutex_t adist_remote_mtx; +static pthread_cond_t adist_remote_cond; +static struct trail *adist_trail; + +static TAILQ_HEAD(, adreq) adist_free_list; +static pthread_mutex_t adist_free_list_lock; +static pthread_cond_t adist_free_list_cond; +static TAILQ_HEAD(, adreq) adist_send_list; +static pthread_mutex_t adist_send_list_lock; +static pthread_cond_t adist_send_list_cond; +static TAILQ_HEAD(, adreq) adist_recv_list; +static pthread_mutex_t adist_recv_list_lock; +static pthread_cond_t adist_recv_list_cond; + +static void +init_environment(void) +{ + struct adreq *adreq; + unsigned int ii; + + rw_init(&adist_remote_lock); + mtx_init(&adist_remote_mtx); + cv_init(&adist_remote_cond); + TAILQ_INIT(&adist_free_list); + mtx_init(&adist_free_list_lock); + cv_init(&adist_free_list_cond); + TAILQ_INIT(&adist_send_list); + mtx_init(&adist_send_list_lock); + cv_init(&adist_send_list_cond); + TAILQ_INIT(&adist_recv_list); + mtx_init(&adist_recv_list_lock); + cv_init(&adist_recv_list_cond); + + for (ii = 0; ii < ADIST_QUEUE_SIZE; ii++) { + adreq = malloc(sizeof(*adreq) + ADIST_BUF_SIZE); + if (adreq == NULL) { + pjdlog_exitx(EX_TEMPFAIL, + "Unable to allocate %zu bytes of memory for adreq object.", + sizeof(*adreq) + ADIST_BUF_SIZE); + } + adreq->adr_byteorder = ADIST_BYTEORDER; + adreq->adr_cmd = ADIST_CMD_UNDEFINED; + adreq->adr_seq = 0; + adreq->adr_datasize = 0; + TAILQ_INSERT_TAIL(&adist_free_list, adreq, adr_next); + } +} + +static int +sender_connect(void) +{ + unsigned char rnd[32], hash[32], resp[32]; + struct proto_conn *conn; + char welcome[8]; + int16_t val; + + val = 1; + if (proto_send(adhost->adh_conn, &val, sizeof(val)) < 0) { + pjdlog_exit(EX_TEMPFAIL, + "Unable to send connection request to parent"); + } + if (proto_recv(adhost->adh_conn, &val, sizeof(val)) < 0) { + pjdlog_exit(EX_TEMPFAIL, + "Unable to receive reply to connection request from parent"); + } + if (val != 0) { + errno = val; + pjdlog_errno(LOG_WARNING, "Unable to connect to %s", + adhost->adh_remoteaddr); + return (-1); + } + if (proto_connection_recv(adhost->adh_conn, true, &conn) < 0) { + pjdlog_exit(EX_TEMPFAIL, + "Unable to receive connection from parent"); + } + if (proto_connect_wait(conn, adcfg->adc_timeout) < 0) { + pjdlog_errno(LOG_WARNING, "Unable to connect to %s", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Connected to %s.", adhost->adh_remoteaddr); + /* Error in setting timeout is not critical, but why should it fail? */ + if (proto_timeout(conn, adcfg->adc_timeout) < 0) + pjdlog_errno(LOG_WARNING, "Unable to set connection timeout"); + else + pjdlog_debug(1, "Timeout set to %d.", adcfg->adc_timeout); + + /* Exchange welcome message, which includes version number. */ + (void)snprintf(welcome, sizeof(welcome), "ADIST%02d", ADIST_VERSION); + if (proto_send(conn, welcome, sizeof(welcome)) < 0) { + pjdlog_errno(LOG_WARNING, + "Unable to send welcome message to %s", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Welcome message sent (%s).", welcome); + bzero(welcome, sizeof(welcome)); + if (proto_recv(conn, welcome, sizeof(welcome)) < 0) { + pjdlog_errno(LOG_WARNING, + "Unable to receive welcome message from %s", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + if (strncmp(welcome, "ADIST", 5) != 0 || !isdigit(welcome[5]) || + !isdigit(welcome[6]) || welcome[7] != '\0') { + pjdlog_warning("Invalid welcome message from %s.", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Welcome message received (%s).", welcome); + /* + * Receiver can only reply with version number lower or equal to + * the one we sent. + */ + adhost->adh_version = atoi(welcome + 5); + if (adhost->adh_version > ADIST_VERSION) { + pjdlog_warning("Invalid version number from %s (%d received, up to %d supported).", + adhost->adh_remoteaddr, adhost->adh_version, ADIST_VERSION); + proto_close(conn); + return (-1); + } + + pjdlog_debug(1, "Version %d negotiated with %s.", adhost->adh_version, + adhost->adh_remoteaddr); + + if (proto_send(conn, adcfg->adc_name, sizeof(adcfg->adc_name)) == -1) { + pjdlog_errno(LOG_WARNING, "Unable to send name to %s", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Name (%s) sent.", adcfg->adc_name); + + if (proto_recv(conn, rnd, sizeof(rnd)) == -1) { + pjdlog_errno(LOG_WARNING, "Unable to receive challenge from %s", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Challenge received."); + + if (HMAC(EVP_sha256(), adhost->adh_password, + (int)strlen(adhost->adh_password), rnd, (int)sizeof(rnd), hash, + NULL) == NULL) { + pjdlog_warning("Unable to generate response."); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Response generated."); + + if (proto_send(conn, hash, sizeof(hash)) == -1) { + pjdlog_errno(LOG_WARNING, "Unable to send response to %s", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Response sent."); + + if (adist_random(rnd, sizeof(rnd)) == -1) { + pjdlog_warning("Unable to generate challenge."); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Challenge generated."); + + if (proto_send(conn, rnd, sizeof(rnd)) == -1) { + pjdlog_errno(LOG_WARNING, "Unable to send challenge to %s", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Challenge sent."); + + if (proto_recv(conn, resp, sizeof(resp)) == -1) { + pjdlog_errno(LOG_WARNING, "Unable to receive response from %s", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Response received."); + + if (HMAC(EVP_sha256(), adhost->adh_password, + (int)strlen(adhost->adh_password), rnd, (int)sizeof(rnd), hash, + NULL) == NULL) { + pjdlog_warning("Unable to generate hash."); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Hash generated."); + + if (memcmp(resp, hash, sizeof(hash)) != 0) { + pjdlog_warning("Invalid response from %s (wrong password?).", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + pjdlog_info("Receiver authenticated."); + + if (proto_recv(conn, &adhost->adh_trail_offset, + sizeof(adhost->adh_trail_offset)) == -1) { + pjdlog_errno(LOG_WARNING, + "Unable to receive size of the most recent trail file from %s", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + adhost->adh_trail_offset = le64toh(adhost->adh_trail_offset); + if (proto_recv(conn, &adhost->adh_trail_name, + sizeof(adhost->adh_trail_name)) == -1) { + pjdlog_errno(LOG_WARNING, + "Unable to receive name of the most recent trail file from %s", + adhost->adh_remoteaddr); + proto_close(conn); + return (-1); + } + pjdlog_debug(1, "Trail name (%s) and offset (%ju) received.", + adhost->adh_trail_name, (uintmax_t)adhost->adh_trail_offset); + + rw_wlock(&adist_remote_lock); + mtx_lock(&adist_remote_mtx); + PJDLOG_ASSERT(adhost->adh_remote == NULL); + PJDLOG_ASSERT(conn != NULL); + adhost->adh_remote = conn; + mtx_unlock(&adist_remote_mtx); + rw_unlock(&adist_remote_lock); + cv_signal(&adist_remote_cond); + + return (0); +} + +static void +sender_disconnect(void) +{ + + rw_wlock(&adist_remote_lock); + /* + * Check for a race between dropping rlock and acquiring wlock - + * another thread can close connection in-between. + */ + if (adhost->adh_remote == NULL) { + rw_unlock(&adist_remote_lock); + return; + } + pjdlog_debug(2, "Closing connection to %s.", adhost->adh_remoteaddr); + proto_close(adhost->adh_remote); + mtx_lock(&adist_remote_mtx); + adhost->adh_remote = NULL; + adhost->adh_reset = true; + adhost->adh_trail_name[0] = '\0'; + adhost->adh_trail_offset = 0; + mtx_unlock(&adist_remote_mtx); + rw_unlock(&adist_remote_lock); + + pjdlog_warning("Disconnected from %s.", adhost->adh_remoteaddr); + + /* Move all in-flight requests back onto free list. */ + mtx_lock(&adist_free_list_lock); + mtx_lock(&adist_send_list_lock); + TAILQ_CONCAT(&adist_free_list, &adist_send_list, adr_next); + mtx_unlock(&adist_send_list_lock); + mtx_lock(&adist_recv_list_lock); + TAILQ_CONCAT(&adist_free_list, &adist_recv_list, adr_next); + mtx_unlock(&adist_recv_list_lock); + mtx_unlock(&adist_free_list_lock); +} + +static void +adreq_fill(struct adreq *adreq, uint8_t cmd, const unsigned char *data, + size_t size) +{ + static uint64_t seq = 1; + + PJDLOG_ASSERT(size <= ADIST_BUF_SIZE); + + switch (cmd) { + case ADIST_CMD_OPEN: + case ADIST_CMD_CLOSE: + PJDLOG_ASSERT(data != NULL && size == 0); + size = strlen(data) + 1; + break; + case ADIST_CMD_APPEND: + PJDLOG_ASSERT(data != NULL && size > 0); + break; + case ADIST_CMD_KEEPALIVE: + case ADIST_CMD_ERROR: + PJDLOG_ASSERT(data == NULL && size == 0); + break; + default: + PJDLOG_ABORT("Invalid command (%hhu).", cmd); + } + + adreq->adr_cmd = cmd; + adreq->adr_seq = seq++; + adreq->adr_datasize = size; + /* Don't copy if data is already in out buffer. */ + if (data != NULL && data != adreq->adr_data) + bcopy(data, adreq->adr_data, size); +} + +static bool +read_thread_wait(void) +{ + bool newfile = false; + + mtx_lock(&adist_remote_mtx); + if (adhost->adh_reset) { + adhost->adh_reset = false; + if (trail_filefd(adist_trail) != -1) + trail_close(adist_trail); + trail_reset(adist_trail); + while (adhost->adh_remote == NULL) + cv_wait(&adist_remote_cond, &adist_remote_mtx); + trail_start(adist_trail, adhost->adh_trail_name, + adhost->adh_trail_offset); + newfile = true; + } + mtx_unlock(&adist_remote_mtx); + while (trail_filefd(adist_trail) == -1) { + newfile = true; + wait_for_dir(); + if (trail_filefd(adist_trail) == -1) + trail_next(adist_trail); + } + if (newfile) { + pjdlog_debug(1, "Trail file \"%s/%s\" opened.", + adhost->adh_directory, + trail_filename(adist_trail)); + (void)wait_for_file_init(trail_filefd(adist_trail)); + } + return (newfile); +} + +static void * +read_thread(void *arg __unused) +{ + struct adreq *adreq; + ssize_t done; + bool newfile; + + pjdlog_debug(1, "%s started.", __func__); + + for (;;) { + newfile = read_thread_wait(); + QUEUE_TAKE(adreq, &adist_free_list, 0); + if (newfile) { + adreq_fill(adreq, ADIST_CMD_OPEN, + trail_filename(adist_trail), 0); + newfile = false; + goto move; + } + + done = read(trail_filefd(adist_trail), adreq->adr_data, + ADIST_BUF_SIZE); + if (done == -1) { + off_t offset; + int error; + + error = errno; + offset = lseek(trail_filefd(adist_trail), 0, SEEK_CUR); + errno = error; + pjdlog_errno(LOG_ERR, + "Error while reading \"%s/%s\" at offset %jd", + adhost->adh_directory, trail_filename(adist_trail), + offset); + trail_close(adist_trail); + adreq_fill(adreq, ADIST_CMD_ERROR, NULL, 0); + goto move; + } else if (done == 0) { + /* End of file. */ + pjdlog_debug(3, "End of \"%s/%s\".", + adhost->adh_directory, trail_filename(adist_trail)); + if (!trail_switch(adist_trail)) { + /* More audit records can arrive. */ + mtx_lock(&adist_free_list_lock); + TAILQ_INSERT_TAIL(&adist_free_list, adreq, + adr_next); + mtx_unlock(&adist_free_list_lock); + wait_for_file(); + continue; + } + adreq_fill(adreq, ADIST_CMD_CLOSE, + trail_filename(adist_trail), 0); + trail_close(adist_trail); + goto move; + } + + adreq_fill(adreq, ADIST_CMD_APPEND, adreq->adr_data, done); +move: + pjdlog_debug(3, + "read thread: Moving request %p to the send queue (%hhu).", + adreq, adreq->adr_cmd); + QUEUE_INSERT(adreq, &adist_send_list); + } + /* NOTREACHED */ + return (NULL); +} + +static void +keepalive_send(void) +{ + struct adreq *adreq; + + rw_rlock(&adist_remote_lock); + if (adhost->adh_remote == NULL) { + rw_unlock(&adist_remote_lock); + return; + } + rw_unlock(&adist_remote_lock); + + mtx_lock(&adist_free_list_lock); + adreq = TAILQ_FIRST(&adist_free_list); + if (adreq != NULL) + TAILQ_REMOVE(&adist_free_list, adreq, adr_next); + mtx_unlock(&adist_free_list_lock); + if (adreq == NULL) + return; + + adreq_fill(adreq, ADIST_CMD_KEEPALIVE, NULL, 0); + + QUEUE_INSERT(adreq, &adist_send_list); + + pjdlog_debug(3, "keepalive_send: Request sent."); +} + +/* + * Thread sends request to secondary node. + */ +static void * +send_thread(void *arg __unused) +{ + time_t lastcheck, now; + struct adreq *adreq; + + pjdlog_debug(1, "%s started.", __func__); + + lastcheck = time(NULL); + + for (;;) { + pjdlog_debug(3, "send thread: Taking request."); + for (;;) { + QUEUE_TAKE(adreq, &adist_send_list, ADIST_KEEPALIVE); + if (adreq != NULL) + break; + now = time(NULL); + if (lastcheck + ADIST_KEEPALIVE <= now) { + keepalive_send(); + lastcheck = now; + } + } + PJDLOG_ASSERT(adreq != NULL); + pjdlog_debug(3, "send thread: (%p) Got request %hhu.", adreq, + adreq->adr_cmd); + /* + * Protect connection from disappearing. + */ + rw_rlock(&adist_remote_lock); + /* + * Move the request to the recv queue first to avoid race + * where the recv thread receives the reply before we move + * the request to the recv queue. + */ + QUEUE_INSERT(adreq, &adist_recv_list); + if (adhost->adh_remote == NULL || + proto_send(adhost->adh_remote, &adreq->adr_packet, + ADPKT_SIZE(adreq)) == -1) { + rw_unlock(&adist_remote_lock); + pjdlog_debug(1, + "send thread: (%p) Unable to send request.", adreq); + if (adhost->adh_remote != NULL) + sender_disconnect(); + continue; + } else { + pjdlog_debug(3, "Request %p sent successfully.", adreq); + adreq_log(LOG_DEBUG, 2, -1, adreq, + "send: (%p) Request sent: ", adreq); + rw_unlock(&adist_remote_lock); + } + } + /* NOTREACHED */ + return (NULL); +} + +static void +adrep_decode_header(struct adrep *adrep) +{ + + /* Byte-swap only is the receiver is using different byte order. */ + if (adrep->adrp_byteorder != ADIST_BYTEORDER) { + adrep->adrp_byteorder = ADIST_BYTEORDER; + adrep->adrp_seq = bswap64(adrep->adrp_seq); + adrep->adrp_error = bswap16(adrep->adrp_error); + } +} + +/* + * Thread receives answer from secondary node and passes it to ggate_send + * thread. + */ +static void * +recv_thread(void *arg __unused) +{ + struct adrep adrep; + struct adreq *adreq; + + pjdlog_debug(1, "%s started.", __func__); + + for (;;) { + /* Wait until there is anything to receive. */ + QUEUE_WAIT(&adist_recv_list); + pjdlog_debug(3, "recv thread: Got something."); + rw_rlock(&adist_remote_lock); + if (adhost->adh_remote == NULL) { + /* + * Connection is dead. + * XXX: We shouldn't be here. + */ + rw_unlock(&adist_remote_lock); + continue; + } + if (proto_recv(adhost->adh_remote, &adrep, + sizeof(adrep)) == -1) { + rw_unlock(&adist_remote_lock); + pjdlog_errno(LOG_ERR, "Unable to receive reply"); + sender_disconnect(); + continue; + } + rw_unlock(&adist_remote_lock); + adrep_decode_header(&adrep); + /* + * Find the request that was just confirmed. + */ + mtx_lock(&adist_recv_list_lock); + TAILQ_FOREACH(adreq, &adist_recv_list, adr_next) { + if (adreq->adr_seq == adrep.adrp_seq) { + TAILQ_REMOVE(&adist_recv_list, adreq, + adr_next); + break; + } + } + if (adreq == NULL) { + /* + * If we disconnected in the meantime, just continue. + * On disconnect sender_disconnect() clears the queue, + * we can use that. + */ + if (TAILQ_EMPTY(&adist_recv_list)) { + rw_unlock(&adist_remote_lock); + continue; + } + mtx_unlock(&adist_recv_list_lock); + pjdlog_error("Found no request matching received 'seq' field (%ju).", + (uintmax_t)adrep.adrp_seq); + sender_disconnect(); + continue; + } + mtx_unlock(&adist_recv_list_lock); + adreq_log(LOG_DEBUG, 2, -1, adreq, + "recv thread: (%p) Request confirmed: ", adreq); + pjdlog_debug(3, "recv thread: (%p) Got request %hhu.", adreq, + adreq->adr_cmd); + if (adrep.adrp_error != 0) { + pjdlog_error("Receiver returned error (%s), disconnecting.", + adist_errstr((int)adrep.adrp_error)); + sender_disconnect(); + continue; + } + if (adreq->adr_cmd == ADIST_CMD_CLOSE) + trail_unlink(adist_trail, adreq->adr_data); + pjdlog_debug(3, "Request received successfully."); + QUEUE_INSERT(adreq, &adist_free_list); + } + /* NOTREACHED */ + return (NULL); +} + +static void +guard_check_connection(void) +{ + + PJDLOG_ASSERT(adhost->adh_role == ADIST_ROLE_SENDER); + + rw_rlock(&adist_remote_lock); + if (adhost->adh_remote != NULL) { + rw_unlock(&adist_remote_lock); + pjdlog_debug(3, "remote_guard: Connection to %s is ok.", + adhost->adh_remoteaddr); + return; + } + + /* + * Upgrade the lock. It doesn't have to be atomic as no other thread + * can change connection status from disconnected to connected. + */ + rw_unlock(&adist_remote_lock); + pjdlog_debug(1, "remote_guard: Reconnecting to %s.", + adhost->adh_remoteaddr); + if (sender_connect() == 0) { + pjdlog_info("Successfully reconnected to %s.", + adhost->adh_remoteaddr); + } else { + pjdlog_debug(1, "remote_guard: Reconnect to %s failed.", + adhost->adh_remoteaddr); + } +} + +/* + * Thread guards remote connections and reconnects when needed, handles + * signals, etc. + */ +static void * +guard_thread(void *arg __unused) +{ + struct timespec timeout; + time_t lastcheck, now; + sigset_t mask; + int signo; + + lastcheck = time(NULL); + + PJDLOG_VERIFY(sigemptyset(&mask) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGINT) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGTERM) == 0); + + timeout.tv_sec = ADIST_KEEPALIVE; + timeout.tv_nsec = 0; + signo = -1; + + for (;;) { + switch (signo) { + case SIGINT: + case SIGTERM: + sigexit_received = true; + pjdlog_exitx(EX_OK, + "Termination signal received, exiting."); + break; + default: + break; + } + + pjdlog_debug(3, "remote_guard: Checking connections."); + now = time(NULL); + if (lastcheck + ADIST_KEEPALIVE <= now) { + guard_check_connection(); + lastcheck = now; + } + signo = sigtimedwait(&mask, NULL, &timeout); + } + /* NOTREACHED */ + return (NULL); +} + +void +adist_sender(struct adist_config *config, struct adist_host *adh) +{ + pthread_t td; + pid_t pid; + int error, mode, debuglevel; + + /* + * Create communication channel for sending connection requests from + * child to parent. + */ + if (proto_connect(NULL, "socketpair://", -1, &adh->adh_conn) == -1) { + pjdlog_errno(LOG_ERR, + "Unable to create connection sockets between child and parent"); + return; + } + + pid = fork(); + if (pid == -1) { + pjdlog_errno(LOG_ERR, "Unable to fork"); + proto_close(adh->adh_conn); + adh->adh_conn = NULL; + return; + } + + if (pid > 0) { + /* This is parent. */ + adh->adh_worker_pid = pid; + /* Declare that we are receiver. */ + proto_recv(adh->adh_conn, NULL, 0); + return; + } + + adcfg = config; + adhost = adh; + + mode = pjdlog_mode_get(); + debuglevel = pjdlog_debug_get(); + + /* Declare that we are sender. */ + proto_send(adhost->adh_conn, NULL, 0); + + descriptors_cleanup(adhost); + +#ifdef TODO + descriptors_assert(adhost, mode); +#endif + + pjdlog_init(mode); + pjdlog_debug_set(debuglevel); + pjdlog_prefix_set("[%s] (%s) ", adhost->adh_name, + role2str(adhost->adh_role)); +#ifdef HAVE_SETPROCTITLE + setproctitle("[%s] (%s) ", adhost->adh_name, + role2str(adhost->adh_role)); +#endif + + /* + * The sender process should be able to remove entries from its + * trail directory, but it should not be able to write to the + * trail files, only read from them. + */ + adist_trail = trail_new(adhost->adh_directory, false); + if (adist_trail == NULL) + exit(EX_OSFILE); + + if (sandbox(ADIST_USER, true, "auditdistd: %s (%s)", + role2str(adhost->adh_role), adhost->adh_name) != 0) { + exit(EX_CONFIG); + } + pjdlog_info("Privileges successfully dropped."); + + /* + * We can ignore wait_for_dir_init() failures. It will fall back to + * using sleep(3). + */ + (void)wait_for_dir_init(trail_dirfd(adist_trail)); + + init_environment(); + if (sender_connect() == 0) { + pjdlog_info("Successfully connected to %s.", + adhost->adh_remoteaddr); + } + adhost->adh_reset = true; + + /* + * Create the guard thread first, so we can handle signals from the + * very begining. + */ + error = pthread_create(&td, NULL, guard_thread, NULL); + PJDLOG_ASSERT(error == 0); + error = pthread_create(&td, NULL, send_thread, NULL); + PJDLOG_ASSERT(error == 0); + error = pthread_create(&td, NULL, recv_thread, NULL); + PJDLOG_ASSERT(error == 0); + (void)read_thread(NULL); +} diff --git a/bin/auditdistd/sigtimedwait.h b/bin/auditdistd/sigtimedwait.h new file mode 100644 index 000000000000..7a074ea9d767 --- /dev/null +++ b/bin/auditdistd/sigtimedwait.h @@ -0,0 +1,92 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/sigtimedwait.h#1 $ + */ + +#ifndef _SIGTIMEDWAIT_H_ +#define _SIGTIMEDWAIT_H_ + +#include <sys/types.h> +#include <sys/time.h> + +#include <assert.h> +#include <errno.h> +#include <signal.h> +#include <stdio.h> +#include <string.h> +#include <unistd.h> + +#include <pjdlog.h> + +static int +sigtimedwait(const sigset_t *set, siginfo_t *info, + const struct timespec *timeout) +{ + struct itimerval it; + sigset_t mask; + int error, signo; + + PJDLOG_ASSERT(info == NULL); + + PJDLOG_VERIFY(sigemptyset(&mask) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGALRM) == 0); + PJDLOG_VERIFY(sigprocmask(SIG_BLOCK, &mask, NULL) == 0); + + timerclear(&it.it_interval); + it.it_value.tv_sec = timeout->tv_sec; + it.it_value.tv_usec = timeout->tv_nsec / 1000; + if (it.it_value.tv_sec == 0 && it.it_value.tv_usec == 0) + it.it_value.tv_usec = 1; + PJDLOG_VERIFY(setitimer(ITIMER_REAL, &it, NULL) == 0); + + bcopy(set, &mask, sizeof(mask)); + PJDLOG_VERIFY(sigaddset(&mask, SIGALRM) == 0); + + PJDLOG_VERIFY(sigwait(&mask, &signo) == 0); + error = errno; + + timerclear(&it.it_interval); + timerclear(&it.it_value); + PJDLOG_VERIFY(setitimer(ITIMER_REAL, &it, NULL) == 0); + + PJDLOG_VERIFY(sigemptyset(&mask) == 0); + PJDLOG_VERIFY(sigaddset(&mask, SIGALRM) == 0); + PJDLOG_VERIFY(sigprocmask(SIG_UNBLOCK, &mask, NULL) == 0); + + if (signo == SIGALRM) { + errno = EAGAIN; + signo = -1; + } else { + errno = error; + } + + return (signo); +} + +#endif /* !_SIGTIMEDWAIT_H_ */ diff --git a/bin/auditdistd/strndup.h b/bin/auditdistd/strndup.h new file mode 100644 index 000000000000..6cf3c95258d2 --- /dev/null +++ b/bin/auditdistd/strndup.h @@ -0,0 +1,55 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/strndup.h#1 $ + */ + +#ifndef _STRNDUP_H_ +#define _STRNDUP_H_ + +#include <stdlib.h> +#include <string.h> + +static char * +strndup(const char *str, size_t len) +{ + size_t outlen; + char *outstr; + + outlen = strlen(str); + if (outlen > len) + outlen = len; + outstr = malloc(outlen + 1); + if (outstr != NULL) { + memcpy(outstr, str, outlen); + outstr[outlen] = '\0'; + } + return (outstr); +} + +#endif /* !_STRNDUP_H_ */ diff --git a/bin/auditdistd/subr.c b/bin/auditdistd/subr.c new file mode 100644 index 000000000000..26f4745e3b8f --- /dev/null +++ b/bin/auditdistd/subr.c @@ -0,0 +1,302 @@ +/*- + * Copyright (c) 2011-2012 Pawel Jakub Dawidek <pawel@dawidek.net> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/subr.c#1 $ + */ + +#include "config.h" + +#ifdef HAVE_KQUEUE +#include <sys/types.h> +#include <sys/event.h> +#include <sys/time.h> +#endif + +#include <errno.h> +#include <stdarg.h> +#include <stdio.h> +#include <string.h> +#include <unistd.h> + +#ifndef HAVE_ARC4RANDOM +#include <openssl/rand.h> +#endif + +#ifndef HAVE_STRLCAT +#include <compat/strlcat.h> +#endif + +#include <pjdlog.h> + +#include "auditdistd.h" +#include "subr.h" + +int +vsnprlcat(char *str, size_t size, const char *fmt, va_list ap) +{ + size_t len; + + len = strlen(str); + return (vsnprintf(str + len, size - len, fmt, ap)); +} + +int +snprlcat(char *str, size_t size, const char *fmt, ...) +{ + va_list ap; + int result; + + va_start(ap, fmt); + result = vsnprlcat(str, size, fmt, ap); + va_end(ap); + return (result); +} + +const char * +role2str(int role) +{ + + switch (role) { + case ADIST_ROLE_SENDER: + return ("sender"); + case ADIST_ROLE_RECEIVER: + return ("receiver"); + } + return ("unknown"); +} + +const char * +adist_errstr(int error) +{ + + switch (error) { + case ADIST_ERROR_WRONG_ORDER: + return ("wrong operations order"); + case ADIST_ERROR_INVALID_NAME: + return ("invalid trail file name"); + case ADIST_ERROR_OPEN_OLD: + return ("attempt to open an old trail file"); + case ADIST_ERROR_CREATE: + return ("creation of new trail file failed"); + case ADIST_ERROR_OPEN: + return ("open of existing trail file failed"); + case ADIST_ERROR_READ: + return ("read failed"); + case ADIST_ERROR_WRITE: + return ("write failed"); + case ADIST_ERROR_RENAME: + return ("rename of a trail file failed"); + default: + return ("unknown error"); + } +} + +void +adreq_log(int loglevel, int debuglevel, int error, struct adreq *adreq, + const char *fmt, ...) +{ + char msg[1024]; + va_list ap; + + va_start(ap, fmt); + (void)vsnprintf(msg, sizeof(msg), fmt, ap); + va_end(ap); + (void)snprlcat(msg, sizeof(msg), "(seq=%ju) ", + (uintmax_t)adreq->adr_seq); + switch (adreq->adr_cmd) { + case ADIST_CMD_OPEN: + (void)snprlcat(msg, sizeof(msg), "OPEN(%s)", + adreq->adr_data); + break; + case ADIST_CMD_APPEND: + (void)snprlcat(msg, sizeof(msg), "APPEND(%ju)", + (uintmax_t)adreq->adr_datasize); + break; + case ADIST_CMD_CLOSE: + (void)snprlcat(msg, sizeof(msg), "CLOSE(%s)", + adreq->adr_data); + break; + case ADIST_CMD_KEEPALIVE: + (void)snprlcat(msg, sizeof(msg), "KEEPALIVE"); + break; + case ADIST_CMD_ERROR: + (void)snprlcat(msg, sizeof(msg), "ERROR"); + break; + default: + (void)snprlcat(msg, sizeof(msg), "UNKNOWN(%hhu)", + adreq->adr_cmd); + break; + } + if (error != -1) + (void)snprlcat(msg, sizeof(msg), ": %s", adist_errstr(error)); + (void)strlcat(msg, ".", sizeof(msg)); + pjdlog_common(loglevel, debuglevel, -1, "%s", msg); +} + +int +adist_random(unsigned char *buf, size_t size) +{ +#ifdef HAVE_ARC4RANDOM_BUF + arc4random_buf(buf, size); + return (0); +#elif defined(HAVE_ARC4RANDOM) + uint32_t val; + + PJDLOG_ASSERT(size > 0); + PJDLOG_ASSERT((size % sizeof(val)) == 0); + + do { + val = arc4random(); + bcopy(&val, buf, sizeof(val)); + buf += sizeof(val); + size -= sizeof(val); + } while (size > 0); + + return (0); +#else + if (RAND_bytes(buf, (int)size) == 0) + return (-1); + return (0); +#endif +} + +static int wait_for_dir_kq = -1; +static int wait_for_file_kq = -1; + +int +wait_for_dir_init(int fd) +{ +#ifdef HAVE_KQUEUE + struct kevent ev; + int error, kq; + + PJDLOG_ASSERT(wait_for_dir_kq == -1); +#endif + + PJDLOG_ASSERT(fd != -1); + +#ifdef HAVE_KQUEUE + kq = kqueue(); + if (kq == -1) { + pjdlog_errno(LOG_WARNING, "kqueue() failed"); + return (-1); + } + EV_SET(&ev, fd, EVFILT_VNODE, EV_ADD | EV_ENABLE | EV_CLEAR, + NOTE_WRITE, 0, 0); + if (kevent(kq, &ev, 1, NULL, 0, NULL) == -1) { + error = errno; + pjdlog_errno(LOG_WARNING, "kevent() failed"); + (void)close(kq); + errno = error; + return (-1); + } + wait_for_dir_kq = kq; +#endif + + return (0); +} + +int +wait_for_file_init(int fd) +{ +#ifdef HAVE_KQUEUE + struct kevent ev[2]; + int error, kq; +#endif + + PJDLOG_ASSERT(fd != -1); + +#ifdef HAVE_KQUEUE + kq = kqueue(); + if (kq == -1) { + pjdlog_errno(LOG_WARNING, "kqueue() failed"); + return (-1); + } + EV_SET(&ev[0], fd, EVFILT_VNODE, EV_ADD | EV_ENABLE | EV_CLEAR, + NOTE_RENAME, 0, 0); + EV_SET(&ev[1], fd, EVFILT_READ, EV_ADD | EV_ENABLE | EV_CLEAR, + 0, 0, 0); + if (kevent(kq, ev, 2, NULL, 0, NULL) == -1) { + error = errno; + pjdlog_errno(LOG_WARNING, "kevent() failed"); + (void)close(kq); + errno = error; + return (-1); + } + wait_for_file_kq = kq; +#endif + + return (0); +} + +/* + * Wait for new file to appear in directory. + */ +void +wait_for_dir(void) +{ +#ifdef HAVE_KQUEUE + struct kevent ev; +#endif + + if (wait_for_dir_kq == -1) { + sleep(1); + return; + } + +#ifdef HAVE_KQUEUE + PJDLOG_ASSERT(wait_for_dir_kq != -1); + + if (kevent(wait_for_dir_kq, NULL, 0, &ev, 1, NULL) == -1) { + pjdlog_errno(LOG_WARNING, "kevent() failed"); + sleep(1); + } +#endif +} + +/* + * Wait for file growth or rename. + */ +void +wait_for_file(void) +{ +#ifdef HAVE_KQUEUE + struct kevent ev[2]; +#endif + + if (wait_for_file_kq == -1) { + sleep(1); + return; + } + +#ifdef HAVE_KQUEUE + PJDLOG_ASSERT(wait_for_file_kq != -1); + + if (kevent(wait_for_file_kq, NULL, 0, ev, 2, NULL) == -1) { + pjdlog_errno(LOG_WARNING, "kevent() failed"); + sleep(1); + } +#endif +} diff --git a/bin/auditdistd/subr.h b/bin/auditdistd/subr.h new file mode 100644 index 000000000000..2f11b65004c8 --- /dev/null +++ b/bin/auditdistd/subr.h @@ -0,0 +1,60 @@ +/*- + * Copyright (c) 2011 Pawel Jakub Dawidek <pawel@dawidek.net> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/subr.h#1 $ + */ + +#ifndef _AUDITDISTD_SUBR_H_ +#define _AUDITDISTD_SUBR_H_ + +#include <sys/types.h> + +#include "auditdistd.h" + +#define KEEP_ERRNO(work) do { \ + int _rerrno; \ + \ + _rerrno = errno; \ + work; \ + errno = _rerrno; \ +} while (0) + +int vsnprlcat(char *str, size_t size, const char *fmt, va_list ap); +int snprlcat(char *str, size_t size, const char *fmt, ...); + +const char *role2str(int role); +const char *adist_errstr(int error); + +void adreq_log(int loglevel, int debuglevel, int error, struct adreq *adreq, + const char *fmt, ...); + +int adist_random(unsigned char *buf, size_t size); + +int wait_for_dir_init(int fd); +int wait_for_file_init(int fd); +void wait_for_dir(void); +void wait_for_file(void); + +#endif /* !_AUDITDISTD_SUBR_H_ */ diff --git a/bin/auditdistd/synch.h b/bin/auditdistd/synch.h new file mode 100644 index 000000000000..30a2a6f31fe4 --- /dev/null +++ b/bin/auditdistd/synch.h @@ -0,0 +1,210 @@ +/*- + * Copyright (c) 2009-2010 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/synch.h#1 $ + */ + +#ifndef _SYNCH_H_ +#define _SYNCH_H_ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include <errno.h> +#include <pthread.h> +#ifdef HAVE_PTHREAD_NP_H +#include <pthread_np.h> +#endif +#include <stdbool.h> +#include <time.h> + +#include <pjdlog.h> + +#ifndef PJDLOG_ASSERT +#include <assert.h> +#define PJDLOG_ASSERT(...) assert(__VA_ARGS__) +#endif + +static __inline void +mtx_init(pthread_mutex_t *lock) +{ + int error; + + error = pthread_mutex_init(lock, NULL); + PJDLOG_ASSERT(error == 0); +} +static __inline void +mtx_destroy(pthread_mutex_t *lock) +{ + int error; + + error = pthread_mutex_destroy(lock); + PJDLOG_ASSERT(error == 0); +} +static __inline void +mtx_lock(pthread_mutex_t *lock) +{ + int error; + + error = pthread_mutex_lock(lock); + PJDLOG_ASSERT(error == 0); +} +static __inline bool +mtx_trylock(pthread_mutex_t *lock) +{ + int error; + + error = pthread_mutex_trylock(lock); + PJDLOG_ASSERT(error == 0 || error == EBUSY); + return (error == 0); +} +static __inline void +mtx_unlock(pthread_mutex_t *lock) +{ + int error; + + error = pthread_mutex_unlock(lock); + PJDLOG_ASSERT(error == 0); +} +static __inline bool +mtx_owned(pthread_mutex_t *lock) +{ + + return (pthread_mutex_isowned_np(lock) != 0); +} + +static __inline void +rw_init(pthread_rwlock_t *lock) +{ + int error; + + error = pthread_rwlock_init(lock, NULL); + PJDLOG_ASSERT(error == 0); +} +static __inline void +rw_destroy(pthread_rwlock_t *lock) +{ + int error; + + error = pthread_rwlock_destroy(lock); + PJDLOG_ASSERT(error == 0); +} +static __inline void +rw_rlock(pthread_rwlock_t *lock) +{ + int error; + + error = pthread_rwlock_rdlock(lock); + PJDLOG_ASSERT(error == 0); +} +static __inline void +rw_wlock(pthread_rwlock_t *lock) +{ + int error; + + error = pthread_rwlock_wrlock(lock); + PJDLOG_ASSERT(error == 0); +} +static __inline void +rw_unlock(pthread_rwlock_t *lock) +{ + int error; + + error = pthread_rwlock_unlock(lock); + PJDLOG_ASSERT(error == 0); +} + +static __inline void +cv_init(pthread_cond_t *cv) +{ + pthread_condattr_t attr; + int error; + + error = pthread_condattr_init(&attr); + PJDLOG_ASSERT(error == 0); +#ifdef HAVE_PTHREAD_CONDATTR_SETCLOCK + error = pthread_condattr_setclock(&attr, CLOCK_MONOTONIC); + PJDLOG_ASSERT(error == 0); +#endif + error = pthread_cond_init(cv, &attr); + PJDLOG_ASSERT(error == 0); + error = pthread_condattr_destroy(&attr); + PJDLOG_ASSERT(error == 0); +} +static __inline void +cv_wait(pthread_cond_t *cv, pthread_mutex_t *lock) +{ + int error; + + error = pthread_cond_wait(cv, lock); + PJDLOG_ASSERT(error == 0); +} +static __inline bool +cv_timedwait(pthread_cond_t *cv, pthread_mutex_t *lock, int timeout) +{ + struct timespec ts; + int error; + + if (timeout == 0) { + cv_wait(cv, lock); + return (false); + } + +#ifdef HAVE_PTHREAD_CONDATTR_SETCLOCK + error = clock_gettime(CLOCK_MONOTONIC, &ts); + PJDLOG_ASSERT(error == 0); + ts.tv_sec += timeout; + error = pthread_cond_timedwait(cv, lock, &ts); +#elif HAVE_PTHREAD_COND_TIMEDWAIT_RELATIVE_NP + ts.tv_sec = timeout; + ts.tv_nsec = 0; + error = pthread_cond_timedwait_relative_np(cv, lock, &ts); +#else +#error Neither pthread_condattr_setclock nor pthread_cond_timedwait_relative_np is available. +#endif + PJDLOG_ASSERT(error == 0 || error == ETIMEDOUT); + return (error == ETIMEDOUT); +} +static __inline void +cv_signal(pthread_cond_t *cv) +{ + int error; + + error = pthread_cond_signal(cv); + PJDLOG_ASSERT(error == 0); +} +static __inline void +cv_broadcast(pthread_cond_t *cv) +{ + int error; + + error = pthread_cond_broadcast(cv); + PJDLOG_ASSERT(error == 0); +} +#endif /* !_SYNCH_H_ */ diff --git a/bin/auditdistd/token.l b/bin/auditdistd/token.l new file mode 100644 index 000000000000..a626e1593d75 --- /dev/null +++ b/bin/auditdistd/token.l @@ -0,0 +1,83 @@ +%{ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/token.l#1 $ + */ + +#include "config.h" + +#include <stdio.h> +#include <string.h> + +#ifndef HAVE_STRNDUP +#include "strndup.h" +#endif + +#include "auditdistd.h" + +#include "parse.h" + +#define SECTION_GLOBAL 0 +#define SECTION_SENDER 1 +#define SECTION_RECEIVER 2 + +int cursection; +int depth; +int lineno; + +#define DP do { } while (0) +%} + +%option noinput +%option nounput +%option noyywrap + +%% +certfile { DP; return CERTFILE; } +directory { DP; return DIRECTORY; } +fingerprint { DP; return FINGERPRINT; } +host { DP; return HOST; } +keyfile { DP; return KEYFILE; } +listen { DP; return LISTEN; } +name { DP; return NAME; } +password { DP; return PASSWORD; } +pidfile { DP; return PIDFILE; } +receiver { DP; return RECEIVER; } +remote { DP; return REMOTE; } +sender { DP; return SENDER; } +source { DP; return SOURCE; } +timeout { DP; return TIMEOUT; } +[0-9]+ { DP; yylval.num = atoi(yytext); return NUM; } +\"[a-zA-Z0-9_/ !@#\$%\^\&\*\(\)\+\=\|\;\?\,\.\-\:]*\" { DP; yylval.str = strndup(yytext + 1, strlen(yytext) - 2); return STR; } +\{ { DP; depth++; return OB; } +\} { DP; depth--; return CB; } +#.*$ /* ignore comments */; +\n { lineno++; } +[ \t]+ /* ignore whitespace */; +%% diff --git a/bin/auditdistd/trail.c b/bin/auditdistd/trail.c new file mode 100644 index 000000000000..59ad8491f922 --- /dev/null +++ b/bin/auditdistd/trail.c @@ -0,0 +1,612 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/trail.c#1 $ + */ + +#include "config.h" + +#include <sys/param.h> +#include <sys/stat.h> + +#include <dirent.h> +#include <errno.h> +#include <fcntl.h> +#include <stdbool.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +#include <compat/compat.h> +#ifndef HAVE_STRLCPY +#include <compat/strlcpy.h> +#endif +#ifndef HAVE_FACCESSAT +#include "faccessat.h" +#endif +#ifndef HAVE_FSTATAT +#include "fstatat.h" +#endif +#ifndef HAVE_OPENAT +#include "openat.h" +#endif +#ifndef HAVE_UNLINKAT +#include "unlinkat.h" +#endif + +#include <pjdlog.h> + +#include "trail.h" + +#define TRAIL_MAGIC 0x79a11 +struct trail { + int tr_magic; + /* Path usually to /var/audit/dist/ directory. */ + char tr_dirname[PATH_MAX]; + /* Descriptor to td_dirname directory. */ + DIR *tr_dirfp; + /* Path to audit trail file. */ + char tr_filename[PATH_MAX]; + /* Descriptor to audit trail file. */ + int tr_filefd; +}; + +#define HALF_LEN 14 + +bool +trail_is_not_terminated(const char *filename) +{ + + return (strcmp(filename + HALF_LEN, ".not_terminated") == 0); +} + +bool +trail_is_crash_recovery(const char *filename) +{ + + return (strcmp(filename + HALF_LEN, ".crash_recovery") == 0); +} + +struct trail * +trail_new(const char *dirname, bool create) +{ + struct trail *trail; + + trail = calloc(1, sizeof(*trail)); + + if (strlcpy(trail->tr_dirname, dirname, sizeof(trail->tr_dirname)) >= + sizeof(trail->tr_dirname)) { + free(trail); + pjdlog_error("Directory name too long (\"%s\").", dirname); + errno = ENAMETOOLONG; + return (NULL); + } + trail->tr_dirfp = opendir(dirname); + if (trail->tr_dirfp == NULL) { + if (create && errno == ENOENT) { + if (mkdir(dirname, 0700) == -1) { + pjdlog_errno(LOG_ERR, + "Unable to create directory \"%s\"", + dirname); + free(trail); + return (NULL); + } + /* TODO: Set directory ownership. */ + } else { + pjdlog_errno(LOG_ERR, + "Unable to open directory \"%s\"", + dirname); + free(trail); + return (NULL); + } + trail->tr_dirfp = opendir(dirname); + if (trail->tr_dirfp == NULL) { + pjdlog_errno(LOG_ERR, + "Unable to open directory \"%s\"", + dirname); + free(trail); + return (NULL); + } + } + trail->tr_filefd = -1; + trail->tr_magic = TRAIL_MAGIC; + return (trail); +} + +void +trail_free(struct trail *trail) +{ + + PJDLOG_ASSERT(trail->tr_magic == TRAIL_MAGIC); + + if (trail->tr_filefd != -1) + trail_close(trail); + closedir(trail->tr_dirfp); + bzero(trail, sizeof(*trail)); + trail->tr_magic = 0; + trail->tr_filefd = -1; + free(trail); +} + +static uint8_t +trail_type(DIR *dirfp, const char *filename) +{ + struct stat sb; + int dfd; + + PJDLOG_ASSERT(dirfp != NULL); + + dfd = dirfd(dirfp); + PJDLOG_ASSERT(dfd >= 0); + if (fstatat(dfd, filename, &sb, AT_SYMLINK_NOFOLLOW) == -1) { + pjdlog_errno(LOG_ERR, "Unable to stat \"%s\"", filename); + return (DT_UNKNOWN); + } + return (IFTODT(sb.st_mode)); +} + +/* + * Find trail file by first part of the name in case it was renamed. + * First part of the trail file name never changes, but trail file + * can be renamed when hosts are disconnected from .not_terminated + * to .[0-9]{14} or to .crash_recovery. + */ +static bool +trail_find(struct trail *trail) +{ + struct dirent *dp; + + PJDLOG_ASSERT(trail->tr_magic == TRAIL_MAGIC); + PJDLOG_ASSERT(trail_is_not_terminated(trail->tr_filename)); + + rewinddir(trail->tr_dirfp); + while ((dp = readdir(trail->tr_dirfp)) != NULL) { + if (strncmp(dp->d_name, trail->tr_filename, HALF_LEN + 1) == 0) + break; + } + if (dp == NULL) + return (false); + PJDLOG_VERIFY(strlcpy(trail->tr_filename, dp->d_name, + sizeof(trail->tr_filename)) < sizeof(trail->tr_filename)); + return (true); +} + +/* + * Open the given trail file and move pointer at the given offset, as this is + * where receiver finished the last time. + * If the file doesn't exist or the given offset is equal to the file size, + * move to the next trail file. + */ +void +trail_start(struct trail *trail, const char *filename, off_t offset) +{ + struct stat sb; + int dfd, fd; + + PJDLOG_ASSERT(trail->tr_magic == TRAIL_MAGIC); + + PJDLOG_VERIFY(strlcpy(trail->tr_filename, filename, + sizeof(trail->tr_filename)) < sizeof(trail->tr_filename)); + trail->tr_filefd = -1; + + if (trail->tr_filename[0] == '\0') { + PJDLOG_ASSERT(offset == 0); + trail_next(trail); + return; + } + + dfd = dirfd(trail->tr_dirfp); + PJDLOG_ASSERT(dfd >= 0); +again: + fd = openat(dfd, trail->tr_filename, O_RDONLY); + if (fd == -1) { + if (errno == ENOENT && + trail_is_not_terminated(trail->tr_filename) && + trail_find(trail)) { + /* File was renamed. Retry with new name. */ + pjdlog_debug(1, + "Trail file was renamed since last connection to \"%s/%s\".", + trail->tr_dirname, trail->tr_filename); + goto again; + } else if (errno == ENOENT) { + /* File disappeared. */ + pjdlog_debug(1, "File \"%s/%s\" doesn't exist.", + trail->tr_dirname, trail->tr_filename); + } else { + pjdlog_errno(LOG_ERR, + "Unable to open file \"%s/%s\", skipping", + trail->tr_dirname, trail->tr_filename); + } + trail_next(trail); + return; + } + if (fstat(fd, &sb) == -1) { + pjdlog_errno(LOG_ERR, + "Unable to stat file \"%s/%s\", skipping", + trail->tr_dirname, trail->tr_filename); + close(fd); + trail_next(trail); + return; + } + if (!S_ISREG(sb.st_mode)) { + pjdlog_warning("File \"%s/%s\" is not a regular file, skipping.", + trail->tr_dirname, trail->tr_filename); + close(fd); + trail_next(trail); + return; + } + /* + * We continue sending requested file if: + * 1. It is not fully sent yet, or + * 2. It is fully sent, but is not terminated, so new data can be + * appended still, or + * 3. It is fully sent but file name has changed. + * + * Note that we are fine if our .not_terminated or .crash_recovery file + * is smaller than the one on the receiver side, as it is possible that + * more data was send to the receiver than was safely stored on disk. + * We accept .not_terminated only because auditdistd can start before + * auditd manage to rename it to .crash_recovery. + */ + if (offset < sb.st_size || + (offset >= sb.st_size && + trail_is_not_terminated(trail->tr_filename)) || + (offset >= sb.st_size && trail_is_not_terminated(filename) && + trail_is_crash_recovery(trail->tr_filename))) { + /* File was not fully send. Let's finish it. */ + if (lseek(fd, offset, SEEK_SET) == -1) { + pjdlog_errno(LOG_ERR, + "Unable to move to offset %jd within file \"%s/%s\", skipping", + (intmax_t)offset, trail->tr_dirname, + trail->tr_filename); + close(fd); + trail_next(trail); + return; + } + if (!trail_is_crash_recovery(trail->tr_filename)) { + pjdlog_debug(1, + "Restarting file \"%s/%s\" at offset %jd.", + trail->tr_dirname, trail->tr_filename, + (intmax_t)offset); + } + trail->tr_filefd = fd; + return; + } + close(fd); + if (offset > sb.st_size) { + pjdlog_warning("File \"%s/%s\" shrinked, removing it.", + trail->tr_dirname, trail->tr_filename); + } else { + pjdlog_debug(1, "File \"%s/%s\" is already sent, removing it.", + trail->tr_dirname, trail->tr_filename); + } + /* Entire file is already sent or it shirnked, we can remove it. */ + if (unlinkat(dfd, trail->tr_filename, 0) == -1) { + pjdlog_errno(LOG_WARNING, "Unable to remove file \"%s/%s\"", + trail->tr_dirname, trail->tr_filename); + } + trail_next(trail); +} + +/* + * Set next file in the trail->tr_dirname directory and open it for reading. + */ +void +trail_next(struct trail *trail) +{ + char curfile[PATH_MAX]; + struct dirent *dp; + int dfd; + + PJDLOG_ASSERT(trail->tr_magic == TRAIL_MAGIC); + PJDLOG_ASSERT(trail->tr_filefd == -1); + +again: + curfile[0] = '\0'; + + rewinddir(trail->tr_dirfp); + while ((dp = readdir(trail->tr_dirfp)) != NULL) { + if (dp->d_name[0] < '0' || dp->d_name[0] > '9') + continue; + if (dp->d_type == DT_UNKNOWN) + dp->d_type = trail_type(trail->tr_dirfp, dp->d_name); + /* We are only interested in regular files, skip the rest. */ + if (dp->d_type != DT_REG) { + pjdlog_debug(1, + "File \"%s/%s\" is not a regular file, skipping.", + trail->tr_dirname, dp->d_name); + continue; + } + /* Skip all files "greater" than curfile. */ + if (curfile[0] != '\0' && strcmp(dp->d_name, curfile) > 0) + continue; + /* Skip all files "smaller" than the current trail_filename. */ + if (trail->tr_filename[0] != '\0' && + strcmp(dp->d_name, trail->tr_filename) <= 0) { + continue; + } + PJDLOG_VERIFY(strlcpy(curfile, dp->d_name, sizeof(curfile)) < + sizeof(curfile)); + } + if (curfile[0] == '\0') { + /* + * There are no new trail files, so we return. + * We don't clear trail_filename string, to know where to + * start when new file appears. + */ + PJDLOG_ASSERT(trail->tr_filefd == -1); + pjdlog_debug(1, "No new trail files."); + return; + } + PJDLOG_VERIFY(strlcpy(trail->tr_filename, curfile, + sizeof(trail->tr_filename)) < sizeof(trail->tr_filename)); + dfd = dirfd(trail->tr_dirfp); + PJDLOG_ASSERT(dfd >= 0); + trail->tr_filefd = openat(dfd, trail->tr_filename, O_RDONLY); + if (trail->tr_filefd == -1) { + pjdlog_errno(LOG_ERR, + "Unable to open file \"%s/%s\", skipping", + trail->tr_dirname, trail->tr_filename); + goto again; + } + pjdlog_debug(1, "Found next trail file: \"%s/%s\".", trail->tr_dirname, + trail->tr_filename); +} + +/* + * Close current trial file. + */ +void +trail_close(struct trail *trail) +{ + + PJDLOG_ASSERT(trail->tr_magic == TRAIL_MAGIC); + PJDLOG_ASSERT(trail->tr_filefd >= 0); + PJDLOG_ASSERT(trail->tr_filename[0] != '\0'); + + PJDLOG_VERIFY(close(trail->tr_filefd) == 0); + trail->tr_filefd = -1; +} + +/* + * Reset trail state. Used when connection is disconnected and we will + * need to start over after reconnect. Trail needs to be already closed. + */ +void +trail_reset(struct trail *trail) +{ + + PJDLOG_ASSERT(trail->tr_magic == TRAIL_MAGIC); + PJDLOG_ASSERT(trail->tr_filefd == -1); + + trail->tr_filename[0] = '\0'; +} + +/* + * Unlink current trial file. + */ +void +trail_unlink(struct trail *trail, const char *filename) +{ + int dfd; + + PJDLOG_ASSERT(trail->tr_magic == TRAIL_MAGIC); + PJDLOG_ASSERT(filename != NULL); + PJDLOG_ASSERT(filename[0] != '\0'); + + dfd = dirfd(trail->tr_dirfp); + PJDLOG_ASSERT(dfd >= 0); + + if (unlinkat(dfd, filename, 0) == -1) { + pjdlog_errno(LOG_ERR, "Unable to remove \"%s/%s\"", + trail->tr_dirname, filename); + } else { + pjdlog_debug(1, "Trail file \"%s/%s\" removed.", + trail->tr_dirname, filename); + } +} + +/* + * Return true if we should switch to next trail file. + * We don't switch if our file name ends with ".not_terminated" and it + * exists (ie. wasn't renamed). + */ +bool +trail_switch(struct trail *trail) +{ + char filename[PATH_MAX]; + int fd; + + PJDLOG_ASSERT(trail->tr_magic == TRAIL_MAGIC); + PJDLOG_ASSERT(trail->tr_filefd >= 0); + + if (!trail_is_not_terminated(trail->tr_filename)) + return (true); + fd = dirfd(trail->tr_dirfp); + PJDLOG_ASSERT(fd >= 0); + if (faccessat(fd, trail->tr_filename, F_OK, 0) == 0) + return (false); + if (errno != ENOENT) { + pjdlog_errno(LOG_ERR, "Unable to access file \"%s/%s\"", + trail->tr_dirname, trail->tr_filename); + } + strlcpy(filename, trail->tr_filename, sizeof(filename)); + if (!trail_find(trail)) { + pjdlog_error("Trail file \"%s/%s\" disappeared.", + trail->tr_dirname, trail->tr_filename); + return (true); + } + pjdlog_debug(1, "Trail file \"%s/%s\" was renamed to \"%s/%s\".", + trail->tr_dirname, filename, trail->tr_dirname, + trail->tr_filename); + return (true); +} + +const char * +trail_filename(const struct trail *trail) +{ + + PJDLOG_ASSERT(trail->tr_magic == TRAIL_MAGIC); + + return (trail->tr_filename); +} + +int +trail_filefd(const struct trail *trail) +{ + + PJDLOG_ASSERT(trail->tr_magic == TRAIL_MAGIC); + + return (trail->tr_filefd); +} + +int +trail_dirfd(const struct trail *trail) +{ + + PJDLOG_ASSERT(trail->tr_magic == TRAIL_MAGIC); + + return (dirfd(trail->tr_dirfp)); +} + +/* + * Find the last file in the directory opened under dirfp. + */ +void +trail_last(DIR *dirfp, char *filename, size_t filenamesize) +{ + char curfile[PATH_MAX]; + struct dirent *dp; + + PJDLOG_ASSERT(dirfp != NULL); + + curfile[0] = '\0'; + + rewinddir(dirfp); + while ((dp = readdir(dirfp)) != NULL) { + if (dp->d_name[0] < '0' || dp->d_name[0] > '9') + continue; + if (dp->d_type == DT_UNKNOWN) + dp->d_type = trail_type(dirfp, dp->d_name); + /* We are only interested in regular files, skip the rest. */ + if (dp->d_type != DT_REG) + continue; + /* Skip all files "greater" than curfile. */ + if (curfile[0] != '\0' && strcmp(dp->d_name, curfile) < 0) + continue; + PJDLOG_VERIFY(strlcpy(curfile, dp->d_name, sizeof(curfile)) < + sizeof(curfile)); + } + if (curfile[0] == '\0') { + /* + * There are no trail files, so we return. + */ + pjdlog_debug(1, "No trail files."); + bzero(filename, filenamesize); + return; + } + PJDLOG_VERIFY(strlcpy(filename, curfile, filenamesize) < filenamesize); + pjdlog_debug(1, "Found the most recent trail file: \"%s\".", filename); +} + +/* + * Check if the given file name is a valid audit trail file name. + * Possible names: + * 20120106132657.20120106132805 + * 20120106132657.not_terminated + * 20120106132657.crash_recovery + * If two names are given, check if the first name can be renamed + * to the second name. When renaming, first part of the name has + * to be identical and only the following renames are valid: + * 20120106132657.not_terminated -> 20120106132657.20120106132805 + * 20120106132657.not_terminated -> 20120106132657.crash_recovery + */ +bool +trail_validate_name(const char *srcname, const char *dstname) +{ + int i; + + PJDLOG_ASSERT(srcname != NULL); + + if (strlen(srcname) != 2 * HALF_LEN + 1) + return (false); + if (srcname[HALF_LEN] != '.') + return (false); + for (i = 0; i < HALF_LEN; i++) { + if (srcname[i] < '0' || srcname[i] > '9') + return (false); + } + for (i = HALF_LEN + 1; i < 2 * HALF_LEN - 1; i++) { + if (srcname[i] < '0' || srcname[i] > '9') + break; + } + if (i < 2 * HALF_LEN - 1 && + strcmp(srcname + HALF_LEN + 1, "not_terminated") != 0 && + strcmp(srcname + HALF_LEN + 1, "crash_recovery") != 0) { + return (false); + } + + if (dstname == NULL) + return (true); + + /* We tolarate if both names are identical. */ + if (strcmp(srcname, dstname) == 0) + return (true); + + /* We can only rename not_terminated files. */ + if (strcmp(srcname + HALF_LEN + 1, "not_terminated") != 0) + return (false); + if (strlen(dstname) != 2 * HALF_LEN + 1) + return (false); + if (strncmp(srcname, dstname, HALF_LEN + 1) != 0) + return (false); + for (i = HALF_LEN + 1; i < 2 * HALF_LEN - 1; i++) { + if (dstname[i] < '0' || dstname[i] > '9') + break; + } + if (i < 2 * HALF_LEN - 1 && + strcmp(dstname + HALF_LEN + 1, "crash_recovery") != 0) { + return (false); + } + + return (true); +} + +int +trail_name_compare(const char *name0, const char *name1) +{ + int ret; + + ret = strcmp(name0, name1); + if (ret == 0) + return (TRAIL_IDENTICAL); + if (strncmp(name0, name1, HALF_LEN + 1) == 0) + return (TRAIL_RENAMED); + return (ret < 0 ? TRAIL_OLDER : TRAIL_NEWER); +} diff --git a/bin/auditdistd/trail.h b/bin/auditdistd/trail.h new file mode 100644 index 000000000000..33c88b28d665 --- /dev/null +++ b/bin/auditdistd/trail.h @@ -0,0 +1,62 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/trail.h#1 $ + */ + +#ifndef _AUDITDISTD_TRAIL_H_ +#define _AUDITDISTD_TRAIL_H_ + +#include <stdbool.h> +#include <unistd.h> /* off_t */ + +#define TRAIL_IDENTICAL 0 +#define TRAIL_RENAMED 1 +#define TRAIL_OLDER 2 +#define TRAIL_NEWER 3 + +struct trail; + +struct trail *trail_new(const char *dirname, bool create); +void trail_free(struct trail *trail); +bool trail_is_not_terminated(const char *filename); +bool trail_is_crash_recovery(const char *filename); +void trail_start(struct trail *trail, const char *filename, off_t offset); +void trail_next(struct trail *trail); +void trail_close(struct trail *trail); +void trail_reset(struct trail *trail); +void trail_unlink(struct trail *trail, const char *filename); +bool trail_switch(struct trail *trail); +const char *trail_filename(const struct trail *trail); +int trail_filefd(const struct trail *trail); +int trail_dirfd(const struct trail *trail); +void trail_last(DIR *dirfp, char *filename, size_t filenamesize); +bool trail_validate_name(const char *srcname, const char *dstname); +int trail_name_compare(const char *name0, const char *name1); + +#endif /* !_AUDITDISTD_TRAIL_H_ */ diff --git a/bin/auditdistd/unlinkat.h b/bin/auditdistd/unlinkat.h new file mode 100644 index 000000000000..ee9c023ba464 --- /dev/null +++ b/bin/auditdistd/unlinkat.h @@ -0,0 +1,68 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/bin/auditdistd/unlinkat.h#1 $ + */ + +#ifndef _UNLINKAT_H_ +#define _UNLINKAT_H_ + +#include <fcntl.h> +#include <unistd.h> + +#define AT_REMOVEDIR 0x01 + +static int +unlinkat(int fd, const char *path, int flag) +{ + int cfd, error, ret; + + cfd = open(".", O_RDONLY | O_DIRECTORY); + if (cfd == -1) + return (-1); + + if (fchdir(fd) == -1) { + error = errno; + (void)close(cfd); + errno = error; + return (-1); + } + + if (flag == AT_REMOVEDIR) + ret = rmdir(path); + else + ret = unlink(path); + + error = errno; + (void)fchdir(cfd); + (void)close(cfd); + errno = error; + return (ret); +} + +#endif /* !_UNLINKAT_H_ */ diff --git a/bin/auditfilterd/Makefile.am b/bin/auditfilterd/Makefile.am index 83399f1dec0d..81d4fb5cc521 100644 --- a/bin/auditfilterd/Makefile.am +++ b/bin/auditfilterd/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/Makefile.am#3 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/Makefile.am#4 $ +## if USE_NATIVE_INCLUDES INCLUDES = -I$(top_builddir) -I$(top_srcdir) diff --git a/bin/auditfilterd/Makefile.in b/bin/auditfilterd/Makefile.in index 6436aa0106fa..e90f7d743476 100644 --- a/bin/auditfilterd/Makefile.in +++ b/bin/auditfilterd/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/auditfilterd/Makefile.in#8 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -38,7 +52,8 @@ build_triplet = @build@ host_triplet = @host@ sbin_PROGRAMS = auditfilterd$(EXEEXT) subdir = bin/auditfilterd -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -46,8 +61,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)" -sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(sbin_PROGRAMS) am_auditfilterd_OBJECTS = auditfilterd_conf.$(OBJEXT) \ auditfilterd.$(OBJEXT) @@ -56,6 +71,7 @@ auditfilterd_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ @@ -67,6 +83,38 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(auditfilterd_SOURCES) DIST_SOURCES = $(auditfilterd_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } man8dir = $(mandir)/man8 NROFF = nroff MANS = $(man8_MANS) @@ -85,45 +133,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -132,13 +187,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -197,14 +254,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditfilterd/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign bin/auditfilterd/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditfilterd/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign bin/auditfilterd/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -222,35 +279,54 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \ - else :; fi; \ - done + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ + } \ + ; done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \ - rm -f "$(DESTDIR)$(sbindir)/$$f"; \ - done + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(sbindir)" && rm -f $$files clean-sbinPROGRAMS: - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -auditfilterd$(EXEEXT): $(auditfilterd_OBJECTS) $(auditfilterd_DEPENDENCIES) + @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +auditfilterd$(EXEEXT): $(auditfilterd_OBJECTS) $(auditfilterd_DEPENDENCIES) $(EXTRA_auditfilterd_DEPENDENCIES) @rm -f auditfilterd$(EXEEXT) $(LINK) $(auditfilterd_OBJECTS) $(auditfilterd_LDADD) $(LIBS) @@ -265,21 +341,21 @@ distclean-compile: .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< @@ -289,65 +365,61 @@ mostlyclean-libtool: clean-libtool: -rm -rf .libs _libs -install-man8: $(man8_MANS) $(man_MANS) +install-man8: $(man8_MANS) @$(NORMAL_INSTALL) - test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)" - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ + @list1='$(man8_MANS)'; \ + list2=''; \ + test -n "$(man8dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.8[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \ + done; } + uninstall-man8: @$(NORMAL_UNINSTALL) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man8dir)/$$inst"; \ - done + @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir) ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -355,34 +427,66 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically 'make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -398,13 +502,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -425,16 +533,22 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -456,6 +570,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -464,18 +580,28 @@ install-data-am: install-man install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-sbinPROGRAMS install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-man8 install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -503,7 +629,7 @@ uninstall-man: uninstall-man8 .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-sbinPROGRAMS ctags distclean \ + clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ @@ -517,6 +643,7 @@ uninstall-man: uninstall-man8 tags uninstall uninstall-am uninstall-man uninstall-man8 \ uninstall-sbinPROGRAMS + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/bin/auditreduce/Makefile.am b/bin/auditreduce/Makefile.am index 8cd4b62d2a48..a02178b2766b 100644 --- a/bin/auditreduce/Makefile.am +++ b/bin/auditreduce/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/Makefile.am#3 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/Makefile.am#4 $ +## if USE_NATIVE_INCLUDES INCLUDES = -I$(top_builddir) -I$(top_srcdir) diff --git a/bin/auditreduce/Makefile.in b/bin/auditreduce/Makefile.in index 21cedd820774..53090e230143 100644 --- a/bin/auditreduce/Makefile.in +++ b/bin/auditreduce/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/Makefile.in#10 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -38,7 +52,8 @@ build_triplet = @build@ host_triplet = @host@ sbin_PROGRAMS = auditreduce$(EXEEXT) subdir = bin/auditreduce -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -46,8 +61,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" -sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(sbin_PROGRAMS) am_auditreduce_OBJECTS = auditreduce.$(OBJEXT) auditreduce_OBJECTS = $(am_auditreduce_OBJECTS) @@ -55,6 +70,7 @@ auditreduce_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ @@ -66,6 +82,38 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(auditreduce_SOURCES) DIST_SOURCES = $(auditreduce_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } man1dir = $(mandir)/man1 NROFF = nroff MANS = $(man1_MANS) @@ -84,45 +132,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -131,13 +186,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -196,14 +253,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditreduce/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign bin/auditreduce/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/auditreduce/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign bin/auditreduce/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -221,35 +278,54 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \ - else :; fi; \ - done + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ + } \ + ; done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \ - rm -f "$(DESTDIR)$(sbindir)/$$f"; \ - done + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(sbindir)" && rm -f $$files clean-sbinPROGRAMS: - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -auditreduce$(EXEEXT): $(auditreduce_OBJECTS) $(auditreduce_DEPENDENCIES) + @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +auditreduce$(EXEEXT): $(auditreduce_OBJECTS) $(auditreduce_DEPENDENCIES) $(EXTRA_auditreduce_DEPENDENCIES) @rm -f auditreduce$(EXEEXT) $(LINK) $(auditreduce_OBJECTS) $(auditreduce_LDADD) $(LIBS) @@ -263,21 +339,21 @@ distclean-compile: .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< @@ -287,65 +363,61 @@ mostlyclean-libtool: clean-libtool: -rm -rf .libs _libs -install-man1: $(man1_MANS) $(man_MANS) +install-man1: $(man1_MANS) @$(NORMAL_INSTALL) - test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ + @list1='$(man1_MANS)'; \ + list2=''; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + uninstall-man1: @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ - done + @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -353,34 +425,66 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically 'make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -396,13 +500,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -423,16 +531,22 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -454,6 +568,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -462,18 +578,28 @@ install-data-am: install-man install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-sbinPROGRAMS install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-man1 install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -501,7 +627,7 @@ uninstall-man: uninstall-man1 .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-sbinPROGRAMS ctags distclean \ + clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ @@ -515,6 +641,7 @@ uninstall-man: uninstall-man1 tags uninstall uninstall-am uninstall-man uninstall-man1 \ uninstall-sbinPROGRAMS + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/bin/auditreduce/auditreduce.1 b/bin/auditreduce/auditreduce.1 index 6151f6e16e56..157f31d12aa7 100644 --- a/bin/auditreduce/auditreduce.1 +++ b/bin/auditreduce/auditreduce.1 @@ -25,7 +25,7 @@ .\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/auditreduce.1#17 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/bin/auditreduce/auditreduce.1#18 $ .\" .Dd January 24, 2004 .Dt AUDITREDUCE 1 @@ -92,7 +92,7 @@ Select records with the given effective group ID or name. .It Fl g Ar rgid Select records with the given real group ID or name. .It Fl j Ar id -Select records having a subject token with matching ID. +Select records having a subject token with matching ID, where ID is a process ID. .It Fl m Ar event Select records with the given event name or number. This option can be used more then once to select records of multiple event types. diff --git a/bin/praudit/Makefile.am b/bin/praudit/Makefile.am index a362cea1cd66..c28afd4758a2 100644 --- a/bin/praudit/Makefile.am +++ b/bin/praudit/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/Makefile.am#3 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/Makefile.am#4 $ +## if USE_NATIVE_INCLUDES INCLUDES = -I$(top_builddir) -I$(top_srcdir) diff --git a/bin/praudit/Makefile.in b/bin/praudit/Makefile.in index 4d88abfb7d04..d8469bb6cbfb 100644 --- a/bin/praudit/Makefile.in +++ b/bin/praudit/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/Makefile.in#10 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -38,7 +52,8 @@ build_triplet = @build@ host_triplet = @host@ sbin_PROGRAMS = praudit$(EXEEXT) subdir = bin/praudit -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -46,8 +61,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" -sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(sbin_PROGRAMS) am_praudit_OBJECTS = praudit.$(OBJEXT) praudit_OBJECTS = $(am_praudit_OBJECTS) @@ -55,6 +70,7 @@ praudit_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ @@ -66,6 +82,38 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(praudit_SOURCES) DIST_SOURCES = $(praudit_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } man1dir = $(mandir)/man1 NROFF = nroff MANS = $(man1_MANS) @@ -84,45 +132,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -131,13 +186,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -196,14 +253,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/praudit/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign bin/praudit/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/praudit/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign bin/praudit/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -221,35 +278,54 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-sbinPROGRAMS: $(sbin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \ - else :; fi; \ - done + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ + } \ + ; done uninstall-sbinPROGRAMS: @$(NORMAL_UNINSTALL) - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \ - rm -f "$(DESTDIR)$(sbindir)/$$f"; \ - done + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(sbindir)" && rm -f $$files clean-sbinPROGRAMS: - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -praudit$(EXEEXT): $(praudit_OBJECTS) $(praudit_DEPENDENCIES) + @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +praudit$(EXEEXT): $(praudit_OBJECTS) $(praudit_DEPENDENCIES) $(EXTRA_praudit_DEPENDENCIES) @rm -f praudit$(EXEEXT) $(LINK) $(praudit_OBJECTS) $(praudit_LDADD) $(LIBS) @@ -263,21 +339,21 @@ distclean-compile: .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< @@ -287,65 +363,61 @@ mostlyclean-libtool: clean-libtool: -rm -rf .libs _libs -install-man1: $(man1_MANS) $(man_MANS) +install-man1: $(man1_MANS) @$(NORMAL_INSTALL) - test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ + @list1='$(man1_MANS)'; \ + list2=''; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + uninstall-man1: @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ - done + @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -353,34 +425,66 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically 'make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -396,13 +500,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -423,16 +531,22 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -454,6 +568,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -462,18 +578,28 @@ install-data-am: install-man install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-sbinPROGRAMS install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-man1 install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -501,7 +627,7 @@ uninstall-man: uninstall-man1 .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-sbinPROGRAMS ctags distclean \ + clean-libtool clean-sbinPROGRAMS cscopelist ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ @@ -515,6 +641,7 @@ uninstall-man: uninstall-man1 tags uninstall uninstall-am uninstall-man uninstall-man1 \ uninstall-sbinPROGRAMS + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/bin/praudit/praudit.1 b/bin/praudit/praudit.1 index 6a4fef087be9..99ea7c81774f 100644 --- a/bin/praudit/praudit.1 +++ b/bin/praudit/praudit.1 @@ -1,4 +1,4 @@ -.\" Copyright (c) 2004 Apple Inc. +.\" Copyright (c) 2004-2009 Apple Inc. .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without @@ -25,9 +25,9 @@ .\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/praudit.1#13 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/praudit.1#14 $ .\" -.Dd November 5, 2006 +.Dd August 4, 2009 .Dt PRAUDIT 1 .Os .Sh NAME @@ -35,7 +35,7 @@ .Nd "print the contents of audit trail files" .Sh SYNOPSIS .Nm -.Op Fl lpx +.Op Fl lnpx .Op Fl r | s .Op Fl d Ar del .Op Ar @@ -58,6 +58,9 @@ The default delimiter is the comma. Prints the entire record on the same line. If this option is not specified, every token is displayed on a different line. +.It Fl n +Do not convert user and group IDs to their names but leave in their +numeric forms. .It Fl p Specify this option if input to .Nm diff --git a/bin/praudit/praudit.c b/bin/praudit/praudit.c index a1dbf9d60276..561ffc9d31dd 100644 --- a/bin/praudit/praudit.c +++ b/bin/praudit/praudit.c @@ -1,5 +1,5 @@ /*- - * Copyright (c) 2004-2008 Apple Inc. + * Copyright (c) 2004-2009 Apple Inc. * Copyright (c) 2006 Martin Voros * All rights reserved. * @@ -27,7 +27,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/praudit.c#14 $ + * $P4: //depot/projects/trustedbsd/openbsm/bin/praudit/praudit.c#15 $ */ /* @@ -35,7 +35,7 @@ */ /* - * praudit [-lpx] [-r | -s] [-d del] [file ...] + * praudit [-lnpx] [-r | -s] [-d del] [file ...] */ #include <bsm/libbsm.h> @@ -49,16 +49,14 @@ extern int optind, optopt, opterr,optreset; static char *del = ","; /* Default delimiter. */ static int oneline = 0; -static int raw = 0; -static int shortfrm = 0; static int partial = 0; -static int xml = 0; +static int oflags = AU_OFLAG_NONE; static void usage(void) { - fprintf(stderr, "usage: praudit [-lpx] [-r | -s] [-d del] " + fprintf(stderr, "usage: praudit [-lnpx] [-r | -s] [-d del] " "[file ...]\n"); exit(1); } @@ -91,15 +89,10 @@ print_tokens(FILE *fp) if (-1 == au_fetch_tok(&tok, buf + bytesread, reclen - bytesread)) break; - if (xml) - au_print_tok_xml(stdout, &tok, del, raw, - shortfrm); - else - au_print_tok(stdout, &tok, del, raw, - shortfrm); + au_print_flags_tok(stdout, &tok, del, oflags); bytesread += tok.len; if (oneline) { - if (!xml) + if (!(oflags & AU_OFLAG_XML)) printf("%s", del); } else printf("\n"); @@ -119,7 +112,7 @@ main(int argc, char **argv) int i; FILE *fp; - while ((ch = getopt(argc, argv, "d:lprsx")) != -1) { + while ((ch = getopt(argc, argv, "d:lnprsx")) != -1) { switch(ch) { case 'd': del = optarg; @@ -129,24 +122,28 @@ main(int argc, char **argv) oneline = 1; break; + case 'n': + oflags |= AU_OFLAG_NORESOLVE; + break; + case 'p': partial = 1; break; case 'r': - if (shortfrm) + if (oflags & AU_OFLAG_SHORT) usage(); /* Exclusive from shortfrm. */ - raw = 1; + oflags |= AU_OFLAG_RAW; break; case 's': - if (raw) + if (oflags & AU_OFLAG_RAW) usage(); /* Exclusive from raw. */ - shortfrm = 1; + oflags |= AU_OFLAG_SHORT; break; case 'x': - xml = 1; + oflags |= AU_OFLAG_XML; break; case '?': @@ -155,7 +152,7 @@ main(int argc, char **argv) } } - if (xml) + if (oflags & AU_OFLAG_XML) au_print_xml_header(stdout); /* For each of the files passed as arguments dump the contents. */ @@ -171,7 +168,7 @@ main(int argc, char **argv) fclose(fp); } - if (xml) + if (oflags & AU_OFLAG_XML) au_print_xml_footer(stdout); return (1); diff --git a/bsm/Makefile.am b/bsm/Makefile.am index b92f9cdd55f6..c36d576f9faa 100644 --- a/bsm/Makefile.am +++ b/bsm/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bsm/Makefile.am#4 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/bsm/Makefile.am#5 $ +## openbsmdir = $(includedir)/bsm diff --git a/bsm/Makefile.in b/bsm/Makefile.in index 2894ae73ef08..3c1c1a52b8df 100644 --- a/bsm/Makefile.in +++ b/bsm/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/bsm/Makefile.in#10 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -46,16 +60,42 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } am__installdirs = "$(DESTDIR)$(openbsmdir)" -openbsmHEADERS_INSTALL = $(INSTALL_HEADER) HEADERS = $(openbsm_HEADERS) ETAGS = etags CTAGS = ctags @@ -72,45 +112,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -119,13 +166,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -185,14 +234,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bsm/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign bsm/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bsm/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign bsm/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -210,6 +259,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo @@ -218,35 +268,39 @@ clean-libtool: -rm -rf .libs _libs install-openbsmHEADERS: $(openbsm_HEADERS) @$(NORMAL_INSTALL) - test -z "$(openbsmdir)" || $(MKDIR_P) "$(DESTDIR)$(openbsmdir)" - @list='$(openbsm_HEADERS)'; for p in $$list; do \ + @list='$(openbsm_HEADERS)'; test -n "$(openbsmdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(openbsmdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(openbsmdir)" || exit 1; \ + fi; \ + for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(openbsmHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(openbsmdir)/$$f'"; \ - $(openbsmHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(openbsmdir)/$$f"; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(openbsmdir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(openbsmdir)" || exit $$?; \ done uninstall-openbsmHEADERS: @$(NORMAL_UNINSTALL) - @list='$(openbsm_HEADERS)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(openbsmdir)/$$f'"; \ - rm -f "$(DESTDIR)$(openbsmdir)/$$f"; \ - done + @list='$(openbsm_HEADERS)'; test -n "$(openbsmdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(openbsmdir)'; $(am__uninstall_files_from_dir) ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -254,29 +308,48 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -297,13 +370,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -324,16 +401,22 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -352,6 +435,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -360,18 +445,28 @@ install-data-am: install-openbsmHEADERS install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -395,7 +490,7 @@ uninstall-am: uninstall-openbsmHEADERS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libtool ctags distclean distclean-generic \ + clean-libtool cscopelist ctags distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ @@ -407,6 +502,7 @@ uninstall-am: uninstall-openbsmHEADERS mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \ uninstall-am uninstall-openbsmHEADERS + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/bsm/auditd_lib.h b/bsm/auditd_lib.h index 087cb0c9b7e8..fb3ca36216e6 100644 --- a/bsm/auditd_lib.h +++ b/bsm/auditd_lib.h @@ -26,7 +26,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/bsm/auditd_lib.h#4 $ + * $P4: //depot/projects/trustedbsd/openbsm/bsm/auditd_lib.h#5 $ */ #ifndef _BSM_AUDITD_LIB_H_ @@ -37,9 +37,10 @@ */ #define NOT_TERMINATED "not_terminated" #define CRASH_RECOVERY "crash_recovery" -#define POSTFIX_LEN (sizeof("YYYYMMDDhhmmss") - 1) -#define FILENAME_LEN ((2 * POSTFIX_LEN) + 2) -#define TIMESTAMP_LEN (POSTFIX_LEN + 1) +#define PREFIX_LEN (sizeof("YYYYMMDDhhmmss") - 1) +#define POSTFIX_LEN PREFIX_LEN +#define FILENAME_LEN (PREFIX_LEN + 1 + POSTFIX_LEN) +#define TIMESTAMP_LEN POSTFIX_LEN /* * Macro to generate the timestamp string for trail file. @@ -91,6 +92,7 @@ int auditd_set_minfree(void); int auditd_expire_trails(int (*warn_expired)(char *)); int auditd_read_dirs(int (*warn_soft)(char *), int (*warn_hard)(char *)); void auditd_close_dirs(void); +int auditd_set_dist(void); int auditd_set_evcmap(void); int auditd_set_namask(void); int auditd_set_policy(void); @@ -101,6 +103,7 @@ int auditd_swap_trail(char *TS, char **newfile, gid_t gid, int auditd_prevent_audit(void); int auditd_gen_record(int event, char *path); int auditd_new_curlink(char *curfile); +int auditd_rename(const char *fromname, const char *toname); int audit_quick_start(void); int audit_quick_stop(void); diff --git a/bsm/libbsm.h b/bsm/libbsm.h index d8c5086adac7..5e9258351839 100644 --- a/bsm/libbsm.h +++ b/bsm/libbsm.h @@ -26,7 +26,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/bsm/libbsm.h#45 $ + * $P4: //depot/projects/trustedbsd/openbsm/bsm/libbsm.h#50 $ */ #ifndef _LIBBSM_H_ @@ -77,12 +77,13 @@ #define AUDIT_USER_FILE "/etc/security/audit_user" #define DIR_CONTROL_ENTRY "dir" -#define MINFREE_CONTROL_ENTRY "minfree" +#define DIST_CONTROL_ENTRY "dist" #define FILESZ_CONTROL_ENTRY "filesz" #define FLAGS_CONTROL_ENTRY "flags" +#define HOST_CONTROL_ENTRY "host" +#define MINFREE_CONTROL_ENTRY "minfree" #define NA_CONTROL_ENTRY "naflags" #define POLICY_CONTROL_ENTRY "policy" -#define AUDIT_HOST_CONTROL_ENTRY "host" #define EXPIRE_AFTER_CONTROL_ENTRY "expire-after" #define AU_CLASS_NAME_MAX 8 @@ -100,6 +101,15 @@ #define AU_TO_NO_WRITE 0 /* Abandon audit record. */ #define AU_TO_WRITE 1 /* Commit audit record. */ +/* + * Output format flags for au_print_flags_tok(). + */ +#define AU_OFLAG_NONE 0x0000 /* Default form. */ +#define AU_OFLAG_RAW 0x0001 /* Raw, numeric form. */ +#define AU_OFLAG_SHORT 0x0002 /* Short form. */ +#define AU_OFLAG_XML 0x0004 /* XML form. */ +#define AU_OFLAG_NORESOLVE 0x0008 /* No user/group name resolution. */ + __BEGIN_DECLS struct au_event_ent { au_event_t ae_number; @@ -215,7 +225,7 @@ typedef struct { */ typedef struct { u_int32_t mode; - u_int32_t uid; + u_int32_t uid; u_int32_t gid; u_int32_t fsid; u_int64_t nid; @@ -224,7 +234,7 @@ typedef struct { typedef struct { u_int32_t mode; - u_int32_t uid; + u_int32_t uid; u_int32_t gid; u_int32_t fsid; u_int64_t nid; @@ -662,6 +672,31 @@ typedef struct { } au_text_t; /* + * upriv status 1 byte + * privstr len 2 bytes + * privstr N bytes + 1 (\0 byte) + */ +typedef struct { + u_int8_t sorf; + u_int16_t privstrlen; + char *priv; +} au_priv_t; + +/* +* privset +* privtstrlen 2 bytes +* privtstr N Bytes + 1 +* privstrlen 2 bytes +* privstr N Bytes + 1 +*/ +typedef struct { + u_int16_t privtstrlen; + char *privtstr; + u_int16_t privstrlen; + char *privstr; +} au_privset_t; + +/* * zonename length 2 bytes * zonename text N bytes + 1 NULL terminator */ @@ -739,6 +774,8 @@ struct tokenstr { au_invalid_t invalid; au_trailer_t trail; au_zonename_t zonename; + au_priv_t priv; + au_privset_t privset; } tt; /* The token is one of the above types */ }; @@ -767,13 +804,14 @@ struct au_class_ent *getauclassnum_r(au_class_ent_t *class_int, void setac(void); void endac(void); int getacdir(char *name, int len); -int getacmin(int *min_val); +int getacdist(void); +int getacexpire(int *andflg, time_t *age, size_t *size); int getacfilesz(size_t *size_val); int getacflg(char *auditstr, int len); +int getachost(char *auditstr, size_t len); +int getacmin(int *min_val); int getacna(char *auditstr, int len); int getacpol(char *auditstr, size_t len); -int getachost(char *auditstr, size_t len); -int getacexpire(int *andflg, time_t *age, size_t *size); int getauditflagsbin(char *auditstr, au_mask_t *masks); int getauditflagschar(char *auditstr, au_mask_t *masks, int verbose); @@ -821,6 +859,8 @@ int au_fetch_tok(tokenstr_t *tok, u_char *buf, int len); //XXX The following interface has different prototype from BSM void au_print_tok(FILE *outfp, tokenstr_t *tok, char *del, char raw, char sfrm); +void au_print_flags_tok(FILE *outfp, tokenstr_t *tok, + char *del, int oflags); void au_print_tok_xml(FILE *outfp, tokenstr_t *tok, char *del, char raw, char sfrm); @@ -842,7 +882,7 @@ int au_bsm_to_socket_type(u_short bsm_socket_type, int *local_socket_typep); u_short au_domain_to_bsm(int local_domain); u_char au_errno_to_bsm(int local_errno); -u_short au_fcntl_cmd_to_bsm(int local_fcntl_command); +u_short au_fcntl_cmd_to_bsm(int local_fcntl_command); u_short au_socket_type_to_bsm(int local_socket_type); const char *au_strerror(u_char bsm_error); diff --git a/compat/closefrom.h b/compat/closefrom.h new file mode 100644 index 000000000000..b0545f352a8c --- /dev/null +++ b/compat/closefrom.h @@ -0,0 +1,53 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/compat/closefrom.h#1 $ + */ + +#ifndef _CLOSEFROM_H_ +#define _CLOSEFROM_H_ + +#include <unistd.h> + +static void +closefrom(int lowfd) +{ + int error, fd, maxfd; + + error = errno; + + maxfd = sysconf(_SC_OPEN_MAX); + if (maxfd < 0) + maxfd = 16384; + for (fd = lowfd; fd <= maxfd; fd++) + (void)close(fd); + + errno = error; +} + +#endif /* !_CLOSEFROM_H_ */ diff --git a/compat/compat.h b/compat/compat.h new file mode 100644 index 000000000000..5cd7446e0a6c --- /dev/null +++ b/compat/compat.h @@ -0,0 +1,59 @@ +/*- + * Copyright (c) 2012 The FreeBSD Foundation + * All rights reserved. + * + * This software was developed by Pawel Jakub Dawidek under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $P4: //depot/projects/trustedbsd/openbsm/compat/compat.h#1 $ + */ + +#ifndef _COMPAT_H_ +#define _COMPAT_H_ + +#include <sys/types.h> +#include <sys/socket.h> + +#ifndef MSG_NOSIGNAL +#define MSG_NOSIGNAL 0 +#endif + +#ifndef __unused +#define __unused __attribute__((__unused__)) +#endif + +#ifndef __packed +#define __packed __attribute__((__packed__)) +#endif + +#ifndef __dead2 +#define __dead2 __attribute__((__noreturn__)) +#endif + +#ifndef __printflike +#define __printflike(fmtarg, firstvararg) \ + __attribute__((__format__ (__printf__, fmtarg, firstvararg))) +#endif + +#endif /* !_COMPAT_H_ */ diff --git a/compat/endian.h b/compat/endian.h index 6ef1d15b3d54..d01c7d4b2340 100644 --- a/compat/endian.h +++ b/compat/endian.h @@ -25,7 +25,7 @@ * SUCH DAMAGE. * * Derived from FreeBSD src/sys/sys/endian.h:1.6. - * $P4: //depot/projects/trustedbsd/openbsm/compat/endian.h#8 $ + * $P4: //depot/projects/trustedbsd/openbsm/compat/endian.h#10 $ */ #ifndef _COMPAT_ENDIAN_H_ @@ -116,6 +116,8 @@ bswap64(uint64_t int64) #define _LITTLE_ENDIAN LITTLE_ENDIAN #endif +/* XXX: Hack. */ +#ifndef htobe16 /* * Host to big endian, host to little endian, big endian to host, and little * endian to host byte order functions as detailed in byteorder(9). @@ -149,113 +151,6 @@ bswap64(uint64_t int64) #define le32toh(x) bswap32((x)) #define le64toh(x) bswap64((x)) #endif /* _BYTE_ORDER == _LITTLE_ENDIAN */ - -/* Alignment-agnostic encode/decode bytestream to/from little/big endian. */ - -static __inline uint16_t -be16dec(const void *pp) -{ - unsigned char const *p = (unsigned char const *)pp; - - return ((p[0] << 8) | p[1]); -} - -static __inline uint32_t -be32dec(const void *pp) -{ - unsigned char const *p = (unsigned char const *)pp; - - return ((p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3]); -} - -static __inline uint64_t -be64dec(const void *pp) -{ - unsigned char const *p = (unsigned char const *)pp; - - return (((uint64_t)be32dec(p) << 32) | be32dec(p + 4)); -} - -static __inline uint16_t -le16dec(const void *pp) -{ - unsigned char const *p = (unsigned char const *)pp; - - return ((p[1] << 8) | p[0]); -} - -static __inline uint32_t -le32dec(const void *pp) -{ - unsigned char const *p = (unsigned char const *)pp; - - return ((p[3] << 24) | (p[2] << 16) | (p[1] << 8) | p[0]); -} - -static __inline uint64_t -le64dec(const void *pp) -{ - unsigned char const *p = (unsigned char const *)pp; - - return (((uint64_t)le32dec(p + 4) << 32) | le32dec(p)); -} - -static __inline void -be16enc(void *pp, uint16_t u) -{ - unsigned char *p = (unsigned char *)pp; - - p[0] = (u >> 8) & 0xff; - p[1] = u & 0xff; -} - -static __inline void -be32enc(void *pp, uint32_t u) -{ - unsigned char *p = (unsigned char *)pp; - - p[0] = (u >> 24) & 0xff; - p[1] = (u >> 16) & 0xff; - p[2] = (u >> 8) & 0xff; - p[3] = u & 0xff; -} - -static __inline void -be64enc(void *pp, uint64_t u) -{ - unsigned char *p = (unsigned char *)pp; - - be32enc(p, u >> 32); - be32enc(p + 4, u & 0xffffffff); -} - -static __inline void -le16enc(void *pp, uint16_t u) -{ - unsigned char *p = (unsigned char *)pp; - - p[0] = u & 0xff; - p[1] = (u >> 8) & 0xff; -} - -static __inline void -le32enc(void *pp, uint32_t u) -{ - unsigned char *p = (unsigned char *)pp; - - p[0] = u & 0xff; - p[1] = (u >> 8) & 0xff; - p[2] = (u >> 16) & 0xff; - p[3] = (u >> 24) & 0xff; -} - -static __inline void -le64enc(void *pp, uint64_t u) -{ - unsigned char *p = (unsigned char *)pp; - - le32enc(p, u & 0xffffffff); - le32enc(p + 4, u >> 32); -} +#endif #endif /* _COMPAT_ENDIAN_H_ */ diff --git a/compat/endian_enc.h b/compat/endian_enc.h new file mode 100644 index 000000000000..9e671b766607 --- /dev/null +++ b/compat/endian_enc.h @@ -0,0 +1,150 @@ +/*- + * Copyright (c) 2002 Thomas Moestl <tmm@FreeBSD.org> + * Copyright (c) 2005 Robert N. M. Watson + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Derived from FreeBSD src/sys/sys/endian.h:1.6. + * $P4: //depot/projects/trustedbsd/openbsm/compat/endian_enc.h#1 $ + */ + +#ifndef _COMPAT_ENDIAN_ENC_H_ +#define _COMPAT_ENDIAN_ENC_H_ + +/* + * Some systems will have the uint/int types defined here already, others + * will need stdint.h. + */ +#ifdef HAVE_STDINT_H +#include <stdint.h> +#endif + +/* Alignment-agnostic encode/decode bytestream to/from little/big endian. */ + +static __inline uint16_t +be16dec(const void *pp) +{ + unsigned char const *p = (unsigned char const *)pp; + + return ((p[0] << 8) | p[1]); +} + +static __inline uint32_t +be32dec(const void *pp) +{ + unsigned char const *p = (unsigned char const *)pp; + + return ((p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3]); +} + +static __inline uint64_t +be64dec(const void *pp) +{ + unsigned char const *p = (unsigned char const *)pp; + + return (((uint64_t)be32dec(p) << 32) | be32dec(p + 4)); +} + +static __inline uint16_t +le16dec(const void *pp) +{ + unsigned char const *p = (unsigned char const *)pp; + + return ((p[1] << 8) | p[0]); +} + +static __inline uint32_t +le32dec(const void *pp) +{ + unsigned char const *p = (unsigned char const *)pp; + + return ((p[3] << 24) | (p[2] << 16) | (p[1] << 8) | p[0]); +} + +static __inline uint64_t +le64dec(const void *pp) +{ + unsigned char const *p = (unsigned char const *)pp; + + return (((uint64_t)le32dec(p + 4) << 32) | le32dec(p)); +} + +static __inline void +be16enc(void *pp, uint16_t u) +{ + unsigned char *p = (unsigned char *)pp; + + p[0] = (u >> 8) & 0xff; + p[1] = u & 0xff; +} + +static __inline void +be32enc(void *pp, uint32_t u) +{ + unsigned char *p = (unsigned char *)pp; + + p[0] = (u >> 24) & 0xff; + p[1] = (u >> 16) & 0xff; + p[2] = (u >> 8) & 0xff; + p[3] = u & 0xff; +} + +static __inline void +be64enc(void *pp, uint64_t u) +{ + unsigned char *p = (unsigned char *)pp; + + be32enc(p, u >> 32); + be32enc(p + 4, u & 0xffffffff); +} + +static __inline void +le16enc(void *pp, uint16_t u) +{ + unsigned char *p = (unsigned char *)pp; + + p[0] = u & 0xff; + p[1] = (u >> 8) & 0xff; +} + +static __inline void +le32enc(void *pp, uint32_t u) +{ + unsigned char *p = (unsigned char *)pp; + + p[0] = u & 0xff; + p[1] = (u >> 8) & 0xff; + p[2] = (u >> 16) & 0xff; + p[3] = (u >> 24) & 0xff; +} + +static __inline void +le64enc(void *pp, uint64_t u) +{ + unsigned char *p = (unsigned char *)pp; + + le32enc(p, u & 0xffffffff); + le32enc(p + 4, u >> 32); +} + +#endif /* _COMPAT_ENDIAN_ENC_H_ */ diff --git a/compat/flopen.h b/compat/flopen.h new file mode 100644 index 000000000000..c68f4a2aded8 --- /dev/null +++ b/compat/flopen.h @@ -0,0 +1,103 @@ +/*- + * Copyright (c) 2007 Dag-Erling Coïdan Smørgrav + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer + * in this position and unchanged. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Derived from FreeBSD head/lib/libutil/flopen.c r193591 + * $P4: //depot/projects/trustedbsd/openbsm/compat/flopen.h#1 $ + */ + +#include <sys/file.h> +#include <sys/stat.h> + +#include <errno.h> +#include <stdarg.h> +#include <unistd.h> + +static int +flopen(const char *path, int flags, ...) +{ + int fd, operation, serrno, trunc; + struct stat sb, fsb; + mode_t mode; + +#ifdef O_EXLOCK + flags &= ~O_EXLOCK; +#endif + + mode = 0; + if (flags & O_CREAT) { + va_list ap; + + va_start(ap, flags); + mode = (mode_t)va_arg(ap, int); /* mode_t promoted to int */ + va_end(ap); + } + + operation = LOCK_EX; + if (flags & O_NONBLOCK) + operation |= LOCK_NB; + + trunc = (flags & O_TRUNC); + flags &= ~O_TRUNC; + + for (;;) { + if ((fd = open(path, flags, mode)) == -1) + /* non-existent or no access */ + return (-1); + if (flock(fd, operation) == -1) { + /* unsupported or interrupted */ + serrno = errno; + (void)close(fd); + errno = serrno; + return (-1); + } + if (stat(path, &sb) == -1) { + /* disappeared from under our feet */ + (void)close(fd); + continue; + } + if (fstat(fd, &fsb) == -1) { + /* can't happen [tm] */ + serrno = errno; + (void)close(fd); + errno = serrno; + return (-1); + } + if (sb.st_dev != fsb.st_dev || + sb.st_ino != fsb.st_ino) { + /* changed under our feet */ + (void)close(fd); + continue; + } + if (trunc && ftruncate(fd, 0) != 0) { + /* can't happen [tm] */ + serrno = errno; + (void)close(fd); + errno = serrno; + return (-1); + } + return (fd); + } +} diff --git a/compat/pidfile.h b/compat/pidfile.h new file mode 100644 index 000000000000..c3a259ba0801 --- /dev/null +++ b/compat/pidfile.h @@ -0,0 +1,293 @@ +/*- + * Copyright (c) 2005 Pawel Jakub Dawidek <pjd@FreeBSD.org> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Derived from FreeBSD head/lib/libutil/pidfile.c r231938 + * $P4: //depot/projects/trustedbsd/openbsm/compat/pidfile.h#1 $ + */ + +#include <sys/param.h> +#include <sys/file.h> +#include <sys/stat.h> + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <fcntl.h> +#include <string.h> +#include <time.h> +#include <err.h> +#include <errno.h> + +#include "flopen.h" + +struct pidfh { + int pf_fd; + char pf_path[MAXPATHLEN + 1]; + dev_t pf_dev; + ino_t pf_ino; +}; + +static int _pidfile_remove(struct pidfh *pfh, int freeit); + +static int +pidfile_verify(const struct pidfh *pfh) +{ + struct stat sb; + + if (pfh == NULL || pfh->pf_fd == -1) + return (EINVAL); + /* + * Check remembered descriptor. + */ + if (fstat(pfh->pf_fd, &sb) == -1) + return (errno); + if (sb.st_dev != pfh->pf_dev || sb.st_ino != pfh->pf_ino) + return (EINVAL); + return (0); +} + +static int +pidfile_read(const char *path, pid_t *pidptr) +{ + char buf[16], *endptr; + int error, fd, i; + + fd = open(path, O_RDONLY); + if (fd == -1) + return (errno); + + i = read(fd, buf, sizeof(buf) - 1); + error = errno; /* Remember errno in case close() wants to change it. */ + close(fd); + if (i == -1) + return (error); + else if (i == 0) + return (EAGAIN); + buf[i] = '\0'; + + *pidptr = strtol(buf, &endptr, 10); + if (endptr != &buf[i]) + return (EINVAL); + + return (0); +} + +static struct pidfh * +pidfile_open(const char *path, mode_t mode, pid_t *pidptr) +{ + struct pidfh *pfh; + struct stat sb; + int error, fd, len, count; + struct timespec rqtp; + + if (pidptr != NULL) + *pidptr = -1; + + if (path == NULL) + return (NULL); + + pfh = malloc(sizeof(*pfh)); + if (pfh == NULL) + return (NULL); + + len = snprintf(pfh->pf_path, sizeof(pfh->pf_path), + "%s", path); + if (len >= (int)sizeof(pfh->pf_path)) { + free(pfh); + errno = ENAMETOOLONG; + return (NULL); + } + + /* + * Open the PID file and obtain exclusive lock. + * We truncate PID file here only to remove old PID immediatelly, + * PID file will be truncated again in pidfile_write(), so + * pidfile_write() can be called multiple times. + */ + fd = flopen(pfh->pf_path, +#ifdef O_CLOEXEC + O_WRONLY | O_CREAT | O_TRUNC | O_NONBLOCK | O_CLOEXEC, mode); +#else + O_WRONLY | O_CREAT | O_TRUNC | O_NONBLOCK, mode); +#endif + if (fd == -1) { + if (errno == EWOULDBLOCK && pidptr != NULL) { + count = 20; + rqtp.tv_sec = 0; + rqtp.tv_nsec = 5000000; + for (;;) { + errno = pidfile_read(pfh->pf_path, pidptr); + if (errno != EAGAIN || --count == 0) + break; + nanosleep(&rqtp, 0); + } + if (errno == EAGAIN) + *pidptr = -1; + if (errno == 0 || errno == EAGAIN) + errno = EEXIST; + } + free(pfh); + return (NULL); + } + +#ifndef O_CLOEXEC + if (fcntl(fd, F_SETFD, FD_CLOEXEC) == -1) { + error = errno; + unlink(pfh->pf_path); + close(fd); + free(pfh); + errno = error; + return (NULL); + } +#endif + + /* + * Remember file information, so in pidfile_write() we are sure we write + * to the proper descriptor. + */ + if (fstat(fd, &sb) == -1) { + error = errno; + unlink(pfh->pf_path); + close(fd); + free(pfh); + errno = error; + return (NULL); + } + + pfh->pf_fd = fd; + pfh->pf_dev = sb.st_dev; + pfh->pf_ino = sb.st_ino; + + return (pfh); +} + +static int +pidfile_write(struct pidfh *pfh) +{ + char pidstr[16]; + int error, fd; + + /* + * Check remembered descriptor, so we don't overwrite some other + * file if pidfile was closed and descriptor reused. + */ + errno = pidfile_verify(pfh); + if (errno != 0) { + /* + * Don't close descriptor, because we are not sure if it's ours. + */ + return (-1); + } + fd = pfh->pf_fd; + + /* + * Truncate PID file, so multiple calls of pidfile_write() are allowed. + */ + if (ftruncate(fd, 0) == -1) { + error = errno; + _pidfile_remove(pfh, 0); + errno = error; + return (-1); + } + + snprintf(pidstr, sizeof(pidstr), "%u", getpid()); + if (pwrite(fd, pidstr, strlen(pidstr), 0) != (ssize_t)strlen(pidstr)) { + error = errno; + _pidfile_remove(pfh, 0); + errno = error; + return (-1); + } + + return (0); +} + +static int +pidfile_close(struct pidfh *pfh) +{ + int error; + + error = pidfile_verify(pfh); + if (error != 0) { + errno = error; + return (-1); + } + + if (close(pfh->pf_fd) == -1) + error = errno; + free(pfh); + if (error != 0) { + errno = error; + return (-1); + } + return (0); +} + +static int +_pidfile_remove(struct pidfh *pfh, int freeit) +{ + int error; + + error = pidfile_verify(pfh); + if (error != 0) { + errno = error; + return (-1); + } + + if (unlink(pfh->pf_path) == -1) + error = errno; + if (close(pfh->pf_fd) == -1) { + if (error == 0) + error = errno; + } + if (freeit) + free(pfh); + else + pfh->pf_fd = -1; + if (error != 0) { + errno = error; + return (-1); + } + return (0); +} + +static int +pidfile_remove(struct pidfh *pfh) +{ + + return (_pidfile_remove(pfh, 1)); +} + +#if 0 +static int +pidfile_fileno(const struct pidfh *pfh) +{ + + if (pfh == NULL || pfh->pf_fd == -1) { + errno = EINVAL; + return (-1); + } + return (pfh->pf_fd); +} +#endif diff --git a/compat/vis.h b/compat/vis.h new file mode 100644 index 000000000000..c03177aa4a49 --- /dev/null +++ b/compat/vis.h @@ -0,0 +1,188 @@ +/*- + * Copyright (c) 1989, 1993 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Defived from FreeBSD head/lib/libc/gen/vis.c 165903, head/include/vis.h + * 203964. + */ + +#include <sys/types.h> +#include <limits.h> +#include <ctype.h> +#include <stdio.h> + +/* + * to select alternate encoding format + */ +#define VIS_OCTAL 0x01 /* use octal \ddd format */ +#define VIS_CSTYLE 0x02 /* use \[nrft0..] where appropriate */ + +/* + * to alter set of characters encoded (default is to encode all + * non-graphic except space, tab, and newline). + */ +#define VIS_SP 0x04 /* also encode space */ +#define VIS_TAB 0x08 /* also encode tab */ +#define VIS_NL 0x10 /* also encode newline */ +#define VIS_WHITE (VIS_SP | VIS_TAB | VIS_NL) +#define VIS_SAFE 0x20 /* only encode "unsafe" characters */ + +/* + * other + */ +#define VIS_NOSLASH 0x40 /* inhibit printing '\' */ +#define VIS_HTTPSTYLE 0x80 /* http-style escape % HEX HEX */ +#define VIS_GLOB 0x100 /* encode glob(3) magics */ + +/* + * unvis return codes + */ +#define UNVIS_VALID 1 /* character valid */ +#define UNVIS_VALIDPUSH 2 /* character valid, push back passed char */ +#define UNVIS_NOCHAR 3 /* valid sequence, no character produced */ +#define UNVIS_SYNBAD -1 /* unrecognized escape sequence */ +#define UNVIS_ERROR -2 /* decoder in unknown state (unrecoverable) */ + +/* + * unvis flags + */ +#define UNVIS_END 1 /* no more characters */ + +#define isoctal(c) (((u_char)(c)) >= '0' && ((u_char)(c)) <= '7') + +/* + * vis - visually encode characters + */ +char * +vis(dst, c, flag, nextc) + char *dst; + int c, nextc; + int flag; +{ + c = (unsigned char)c; + + if (flag & VIS_HTTPSTYLE) { + /* Described in RFC 1808 */ + if (!(isalnum(c) /* alpha-numeric */ + /* safe */ + || c == '$' || c == '-' || c == '_' || c == '.' || c == '+' + /* extra */ + || c == '!' || c == '*' || c == '\'' || c == '(' + || c == ')' || c == ',')) { + *dst++ = '%'; + snprintf(dst, 4, (c < 16 ? "0%X" : "%X"), c); + dst += 2; + goto done; + } + } + + if ((flag & VIS_GLOB) && + (c == '*' || c == '?' || c == '[' || c == '#')) + ; + else if (isgraph(c) || + ((flag & VIS_SP) == 0 && c == ' ') || + ((flag & VIS_TAB) == 0 && c == '\t') || + ((flag & VIS_NL) == 0 && c == '\n') || + ((flag & VIS_SAFE) && (c == '\b' || c == '\007' || c == '\r'))) { + *dst++ = c; + if (c == '\\' && (flag & VIS_NOSLASH) == 0) + *dst++ = '\\'; + *dst = '\0'; + return (dst); + } + + if (flag & VIS_CSTYLE) { + switch(c) { + case '\n': + *dst++ = '\\'; + *dst++ = 'n'; + goto done; + case '\r': + *dst++ = '\\'; + *dst++ = 'r'; + goto done; + case '\b': + *dst++ = '\\'; + *dst++ = 'b'; + goto done; + case '\a': + *dst++ = '\\'; + *dst++ = 'a'; + goto done; + case '\v': + *dst++ = '\\'; + *dst++ = 'v'; + goto done; + case '\t': + *dst++ = '\\'; + *dst++ = 't'; + goto done; + case '\f': + *dst++ = '\\'; + *dst++ = 'f'; + goto done; + case ' ': + *dst++ = '\\'; + *dst++ = 's'; + goto done; + case '\0': + *dst++ = '\\'; + *dst++ = '0'; + if (isoctal(nextc)) { + *dst++ = '0'; + *dst++ = '0'; + } + goto done; + } + } + if (((c & 0177) == ' ') || isgraph(c) || (flag & VIS_OCTAL)) { + *dst++ = '\\'; + *dst++ = ((u_char)c >> 6 & 07) + '0'; + *dst++ = ((u_char)c >> 3 & 07) + '0'; + *dst++ = ((u_char)c & 07) + '0'; + goto done; + } + if ((flag & VIS_NOSLASH) == 0) + *dst++ = '\\'; + if (c & 0200) { + c &= 0177; + *dst++ = 'M'; + } + if (iscntrl(c)) { + *dst++ = '^'; + if (c == 0177) + *dst++ = '?'; + else + *dst++ = c + '@'; + } else { + *dst++ = '-'; + *dst++ = c; + } +done: + *dst = '\0'; + return (dst); +} diff --git a/config/config.h.in b/config/config.h.in index 73ba85ba7d8b..647960aa9864 100644 --- a/config/config.h.in +++ b/config/config.h.in @@ -3,36 +3,60 @@ /* Define to 1 if you have the `alarm' function. */ #undef HAVE_ALARM +/* Define to 1 if you have the `arc4random' function. */ +#undef HAVE_ARC4RANDOM + +/* Define to 1 if you have the `arc4random_buf' function. */ +#undef HAVE_ARC4RANDOM_BUF + /* Define if audit system calls present */ #undef HAVE_AUDIT_SYSCALLS -/* Define if be32enc is present */ -#undef HAVE_BE32ENC - /* Define to 1 if you have the `bzero' function. */ #undef HAVE_BZERO +/* Define to 1 if you have the `cap_enter' function. */ +#undef HAVE_CAP_ENTER + /* Define to 1 if your system has a working `chown' function. */ #undef HAVE_CHOWN /* Define to 1 if you have the `clock_gettime' function. */ #undef HAVE_CLOCK_GETTIME +/* Define to 1 if you have the `closefrom' function. */ +#undef HAVE_CLOSEFROM + /* Define to 1 if you have the <dlfcn.h> header file. */ #undef HAVE_DLFCN_H /* Define to 1 if you have the <endian.h> header file. */ #undef HAVE_ENDIAN_H +/* Define to 1 if you have the `faccessat' function. */ +#undef HAVE_FACCESSAT + +/* Define to 1 if you have the `fdopendir' function. */ +#undef HAVE_FDOPENDIR + /* Define to 1 if you have the `fork' function. */ #undef HAVE_FORK +/* Define to 1 if you have the `fstatat' function. */ +#undef HAVE_FSTATAT + /* Define to 1 if you have the `ftruncate' function. */ #undef HAVE_FTRUNCATE /* Define if queue.h includes LIST_FIRST */ #undef HAVE_FULL_QUEUE_H +/* Define to 1 if you have the `getresgid' function. */ +#undef HAVE_GETRESGID + +/* Define to 1 if you have the `getresuid' function. */ +#undef HAVE_GETRESUID + /* Define to 1 if you have the `gettimeofday' function. */ #undef HAVE_GETTIMEOFDAY @@ -54,6 +78,12 @@ /* Define if ipc_perm.__seq instead of seq */ #undef HAVE_IPC_PERM___SEQ +/* Define to 1 if you have the `jail' function. */ +#undef HAVE_JAIL + +/* Define to 1 if you have the `kqueue' function. */ +#undef HAVE_KQUEUE + /* Define to 1 if you have the <machine/endian.h> header file. */ #undef HAVE_MACHINE_ENDIAN_H @@ -70,9 +100,37 @@ /* Define to 1 if you have the `memset' function. */ #undef HAVE_MEMSET +/* Define to 1 if you have the `openat' function. */ +#undef HAVE_OPENAT + +/* Define to 1 if you have the <printf.h> header file. */ +#undef HAVE_PRINTF_H + +/* Define to 1 if you have the `pthread_condattr_setclock' function. */ +#undef HAVE_PTHREAD_CONDATTR_SETCLOCK + +/* Define to 1 if you have the `pthread_cond_timedwait_relative_np' function. + */ +#undef HAVE_PTHREAD_COND_TIMEDWAIT_RELATIVE_NP + /* Define to 1 if you have the `pthread_mutex_lock' function. */ #undef HAVE_PTHREAD_MUTEX_LOCK +/* Define to 1 if you have the <pthread_np.h> header file. */ +#undef HAVE_PTHREAD_NP_H + +/* Define to 1 if you have the `renameat' function. */ +#undef HAVE_RENAMEAT + +/* Define to 1 if you have the `setproctitle' function. */ +#undef HAVE_SETPROCTITLE + +/* Define to 1 if you have the `sigtimedwait' function. */ +#undef HAVE_SIGTIMEDWAIT + +/* Define if sockaddr_storage.ss_len field exists */ +#undef HAVE_SOCKADDR_STORAGE_SS_LEN + /* Define to 1 if `stat' has the bug that it succeeds when given the zero-length file name argument. */ #undef HAVE_STAT_EMPTY_STRING_BUG @@ -104,6 +162,9 @@ /* Define to 1 if you have the `strlcpy' function. */ #undef HAVE_STRLCPY +/* Define to 1 if you have the `strndup' function. */ +#undef HAVE_STRNDUP + /* Define to 1 if you have the `strrchr' function. */ #undef HAVE_STRRCHR @@ -116,7 +177,7 @@ /* Define to 1 if you have the `strtoul' function. */ #undef HAVE_STRTOUL -/* Define to 1 if `st_rdev' is member of `struct stat'. */ +/* Define to 1 if `st_rdev' is a member of `struct stat'. */ #undef HAVE_STRUCT_STAT_ST_RDEV /* Define to 1 if you have the <sys/endian.h> header file. */ @@ -137,12 +198,18 @@ /* Define to 1 if you have the <unistd.h> header file. */ #undef HAVE_UNISTD_H +/* Define to 1 if you have the `unlinkat' function. */ +#undef HAVE_UNLINKAT + /* Define to 1 if you have the `vfork' function. */ #undef HAVE_VFORK /* Define to 1 if you have the <vfork.h> header file. */ #undef HAVE_VFORK_H +/* Define to 1 if you have the `vis' function. */ +#undef HAVE_VIS + /* Define to 1 if `fork' works. */ #undef HAVE_WORKING_FORK @@ -153,6 +220,10 @@ slash. */ #undef LSTAT_FOLLOWS_SLASHED_SYMLINK +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + /* Name of package */ #undef PACKAGE @@ -168,6 +239,9 @@ /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME +/* Define to the home page for this package. */ +#undef PACKAGE_URL + /* Define to the version of this package. */ #undef PACKAGE_VERSION @@ -183,15 +257,34 @@ /* Define to 1 if your <sys/time.h> declares `struct tm'. */ #undef TM_IN_SYS_TIME +/* Define if compat/endian_enc.h is required */ +#undef USE_COMPAT_ENDIAN_ENC_H + +/* Define if compat/endian.h is required */ +#undef USE_COMPAT_ENDIAN_H + +/* Define if endian.h should be included */ +#undef USE_ENDIAN_H + +/* Define if machine/endian.h should be included */ +#undef USE_MACHINE_ENDIAN_H + /* Define if uses Mach IPC for Triggers messages */ #undef USE_MACH_IPC /* Define to use native include files */ #undef USE_NATIVE_INCLUDES +/* Define if sys/endian.h should be included */ +#undef USE_SYS_ENDIAN_H + /* Version number of package */ #undef VERSION +/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a + `char[]'. */ +#undef YYTEXT_POINTER + /* Use extended API on platforms that require it */ #undef _GNU_SOURCE diff --git a/config/ltmain.sh b/config/ltmain.sh index ce02bc6ffaa2..16ddbf884b67 100644 --- a/config/ltmain.sh +++ b/config/ltmain.sh @@ -1,52 +1,90 @@ -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun configure. -# + +# libtool (GNU libtool) 2.4.2 +# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 + # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -# 2007, 2008 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -# -# This program is free software; you can redistribute it and/or modify +# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. +# This is free software; see the source for copying conditions. There is NO +# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + +# GNU Libtool is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # -# This program is distributed in the hope that it will be useful, but +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -basename="s,^.*/,,g" - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, +# or obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# The name of this program: -progname=`echo "$progpath" | $SED $basename` -modename="$progname" - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 +# Usage: $progname [OPTION]... [MODE-ARG]... +# +# Provide generalized library-building support services. +# +# --config show all configuration variables +# --debug enable verbose shell tracing +# -n, --dry-run display commands without modifying any files +# --features display basic configuration information and exit +# --mode=MODE use operation mode MODE +# --preserve-dup-deps don't remove duplicate dependency libraries +# --quiet, --silent don't print informational messages +# --no-quiet, --no-silent +# print informational messages (default) +# --no-warn don't display warning messages +# --tag=TAG use configuration variables from tag TAG +# -v, --verbose print more informational messages than default +# --no-verbose don't print the extra informational messages +# --version print version information +# -h, --help, --help-all print short, long, or detailed help message +# +# MODE must be one of the following: +# +# clean remove files from the build directory +# compile compile a source file into a libtool object +# execute automatically set library path, then run a program +# finish complete the installation of libtool libraries +# install install libraries or executables +# link create a library or an executable +# uninstall remove libraries from an installed directory +# +# MODE-ARGS vary depending on the MODE. When passed as first option, +# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that. +# Try `$progname --help --mode=MODE' for a more detailed description of MODE. +# +# When reporting a bug, please describe a test case to reproduce it and +# include the following information: +# +# host-triplet: $host +# shell: $SHELL +# compiler: $LTCC +# compiler flags: $LTCFLAGS +# linker: $LD (gnu? $with_gnu_ld) +# $progname: (GNU libtool) 2.4.2 +# automake: $automake_version +# autoconf: $autoconf_version +# +# Report bugs to <bug-libtool@gnu.org>. +# GNU libtool home page: <http://www.gnu.org/software/libtool/>. +# General help using GNU software: <http://www.gnu.org/gethelp/>. -PROGRAM=ltmain.sh +PROGRAM=libtool PACKAGE=libtool -VERSION=1.5.26 -TIMESTAMP=" (1.1220.2.492 2008/01/30 06:40:56)" +VERSION=2.4.2 +TIMESTAMP="" +package_revision=1.3337 -# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). +# Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: @@ -60,104 +98,457 @@ fi BIN_SH=xpg4; export BIN_SH # for Tru64 DUALCASE=1; export DUALCASE # for MKS sh -# Check that we have a working $echo. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$progpath" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF -$* -EOF - exit $EXIT_SUCCESS -fi - -default_mode= -help="Try \`$progname --help' for more information." -magic="%%%MAGIC variable%%%" -mkdir="mkdir" -mv="mv -f" -rm="rm -f" - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - SP2NL='tr \040 \012' - NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - SP2NL='tr \100 \n' - NL2SP='tr \r\n \100\100' - ;; -esac +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' +} -# NLS nuisances. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -# We save the old values to restore during execute mode. -lt_env= +# NLS nuisances: We save the old values to restore during execute mode. +lt_user_locale= +lt_safe_locale= for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES do eval "if test \"\${$lt_var+set}\" = set; then - save_$lt_var=\$$lt_var - lt_env=\"$lt_var=\$$lt_var \$lt_env\" - $lt_var=C + save_$lt_var=\$$lt_var + $lt_var=C export $lt_var + lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" + lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" fi" done +LC_ALL=C +LANGUAGE=C +export LANGUAGE LC_ALL -if test -n "$lt_env"; then - lt_env="env $lt_env" -fi +$lt_unset CDPATH + + +# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh +# is ksh but when the shell is invoked as "sh" and the current value of +# the _XPG environment variable is not equal to 1 (one), the special +# positional parameter $0, within a function call, is the name of the +# function. +progpath="$0" + + + +: ${CP="cp -f"} +test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} +: ${MAKE="make"} +: ${MKDIR="mkdir"} +: ${MV="mv -f"} +: ${RM="rm -f"} +: ${SHELL="${CONFIG_SHELL-/bin/sh}"} +: ${Xsed="$SED -e 1s/^X//"} + +# Global variables: +EXIT_SUCCESS=0 +EXIT_FAILURE=1 +EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. +EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. + +exit_status=$EXIT_SUCCESS # Make sure IFS has a sensible default lt_nl=' ' IFS=" $lt_nl" -if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - $echo "$modename: not configured to build any kind of library" 1>&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE -fi +dirname="s,/[^/]*$,," +basename="s,^.*/,," -# Global variables. -mode=$default_mode -nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= -execute_dlfiles= -duplicate_deps=no -preserve_args= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -extracted_archives= -extracted_serial=0 +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + func_dirname_result=`$ECHO "${1}" | $SED "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} # func_dirname may be replaced by extended shell implementation + + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "${1}" | $SED "$basename"` +} # func_basename may be replaced by extended shell implementation + + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi + func_basename_result=`$ECHO "${1}" | $SED -e "$basename"` +} # func_dirname_and_basename may be replaced by extended shell implementation + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname may be replaced by extended shell implementation + + +# These SED scripts presuppose an absolute path with a trailing slash. +pathcar='s,^/\([^/]*\).*$,\1,' +pathcdr='s,^/[^/]*,,' +removedotparts=':dotsl + s@/\./@/@g + t dotsl + s,/\.$,/,' +collapseslashes='s@/\{1,\}@/@g' +finalslash='s,/*$,/,' + +# func_normal_abspath PATH +# Remove doubled-up and trailing slashes, "." path components, +# and cancel out any ".." path components in PATH after making +# it an absolute path. +# value returned in "$func_normal_abspath_result" +func_normal_abspath () +{ + # Start from root dir and reassemble the path. + func_normal_abspath_result= + func_normal_abspath_tpath=$1 + func_normal_abspath_altnamespace= + case $func_normal_abspath_tpath in + "") + # Empty path, that just means $cwd. + func_stripname '' '/' "`pwd`" + func_normal_abspath_result=$func_stripname_result + return + ;; + # The next three entries are used to spot a run of precisely + # two leading slashes without using negated character classes; + # we take advantage of case's first-match behaviour. + ///*) + # Unusual form of absolute path, do nothing. + ;; + //*) + # Not necessarily an ordinary path; POSIX reserves leading '//' + # and for example Cygwin uses it to access remote file shares + # over CIFS/SMB, so we conserve a leading double slash if found. + func_normal_abspath_altnamespace=/ + ;; + /*) + # Absolute path, do nothing. + ;; + *) + # Relative path, prepend $cwd. + func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath + ;; + esac + # Cancel out all the simple stuff to save iterations. We also want + # the path to end with a slash for ease of parsing, so make sure + # there is one (and only one) here. + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"` + while :; do + # Processed it all yet? + if test "$func_normal_abspath_tpath" = / ; then + # If we ascended to the root using ".." the result may be empty now. + if test -z "$func_normal_abspath_result" ; then + func_normal_abspath_result=/ + fi + break + fi + func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcar"` + func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \ + -e "$pathcdr"` + # Figure out what to do with it + case $func_normal_abspath_tcomponent in + "") + # Trailing empty path component, ignore it. + ;; + ..) + # Parent dir; strip last assembled component from result. + func_dirname "$func_normal_abspath_result" + func_normal_abspath_result=$func_dirname_result + ;; + *) + # Actual path component, append it. + func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent + ;; + esac + done + # Restore leading double-slash if one was found on entry. + func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result +} + +# func_relative_path SRCDIR DSTDIR +# generates a relative path from SRCDIR to DSTDIR, with a trailing +# slash if non-empty, suitable for immediately appending a filename +# without needing to append a separator. +# value returned in "$func_relative_path_result" +func_relative_path () +{ + func_relative_path_result= + func_normal_abspath "$1" + func_relative_path_tlibdir=$func_normal_abspath_result + func_normal_abspath "$2" + func_relative_path_tbindir=$func_normal_abspath_result + + # Ascend the tree starting from libdir + while :; do + # check if we have found a prefix of bindir + case $func_relative_path_tbindir in + $func_relative_path_tlibdir) + # found an exact match + func_relative_path_tcancelled= + break + ;; + $func_relative_path_tlibdir*) + # found a matching prefix + func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir" + func_relative_path_tcancelled=$func_stripname_result + if test -z "$func_relative_path_result"; then + func_relative_path_result=. + fi + break + ;; + *) + func_dirname $func_relative_path_tlibdir + func_relative_path_tlibdir=${func_dirname_result} + if test "x$func_relative_path_tlibdir" = x ; then + # Have to descend all the way to the root! + func_relative_path_result=../$func_relative_path_result + func_relative_path_tcancelled=$func_relative_path_tbindir + break + fi + func_relative_path_result=../$func_relative_path_result + ;; + esac + done + + # Now calculate path; take care to avoid doubling-up slashes. + func_stripname '' '/' "$func_relative_path_result" + func_relative_path_result=$func_stripname_result + func_stripname '/' '/' "$func_relative_path_tcancelled" + if test "x$func_stripname_result" != x ; then + func_relative_path_result=${func_relative_path_result}/${func_stripname_result} + fi + + # Normalisation. If bindir is libdir, return empty string, + # else relative path ending with a slash; either way, target + # file name can be directly appended. + if test ! -z "$func_relative_path_result"; then + func_stripname './' '' "$func_relative_path_result/" + func_relative_path_result=$func_stripname_result + fi +} + +# The name of this program: +func_dirname_and_basename "$progpath" +progname=$func_basename_result + +# Make sure we have an absolute path for reexecution: +case $progpath in + [\\/]*|[A-Za-z]:\\*) ;; + *[\\/]*) + progdir=$func_dirname_result + progdir=`cd "$progdir" && pwd` + progpath="$progdir/$progname" + ;; + *) + save_IFS="$IFS" + IFS=${PATH_SEPARATOR-:} + for progdir in $PATH; do + IFS="$save_IFS" + test -x "$progdir/$progname" && break + done + IFS="$save_IFS" + test -n "$progdir" || progdir=`pwd` + progpath="$progdir/$progname" + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed="${SED}"' -e 1s/^X//' +sed_quote_subst='s/\([`"$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution that turns a string into a regex matching for the +# string literally. +sed_make_literal_regex='s,[].[^$\\*\/],\\&,g' + +# Sed substitution that converts a w32 file name or path +# which contains forward slashes, into one that contains +# (escaped) backslashes. A very naive implementation. +lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' + +# Re-`\' parameter expansions in output of double_quote_subst that were +# `\'-ed in input to the same. If an odd number of `\' preceded a '$' +# in input to double_quote_subst, that '$' was protected from expansion. +# Since each input `\' is now two `\'s, look for any number of runs of +# four `\'s followed by two `\'s and then a '$'. `\' that '$'. +bs='\\' +bs2='\\\\' +bs4='\\\\\\\\' +dollar='\$' +sed_double_backslash="\ + s/$bs4/&\\ +/g + s/^$bs2$dollar/$bs&/ + s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g + s/\n//g" + +# Standard options: +opt_dry_run=false +opt_help=false +opt_quiet=false +opt_verbose=false +opt_warning=: + +# func_echo arg... +# Echo program name prefixed message, along with the current mode +# name if it has been set yet. +func_echo () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }$*" +} + +# func_verbose arg... +# Echo program name prefixed message in verbose mode only. +func_verbose () +{ + $opt_verbose && func_echo ${1+"$@"} + + # A bug in bash halts the script if the last line of a function + # fails when set -e is in force, so we need another command to + # work around that: + : +} + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +# func_error arg... +# Echo program name prefixed message to standard error. +func_error () +{ + $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2 +} + +# func_warning arg... +# Echo program name prefixed warning message to standard error. +func_warning () +{ + $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2 + + # bash bug again: + : +} + +# func_fatal_error arg... +# Echo program name prefixed message to standard error, and exit. +func_fatal_error () +{ + func_error ${1+"$@"} + exit $EXIT_FAILURE +} + +# func_fatal_help arg... +# Echo program name prefixed message to standard error, followed by +# a help hint, and exit. +func_fatal_help () +{ + func_error ${1+"$@"} + func_fatal_error "$help" +} +help="Try \`$progname --help' for more information." ## default + + +# func_grep expression filename +# Check whether EXPRESSION matches any line of FILENAME, without output. +func_grep () +{ + $GREP "$1" "$2" >/dev/null 2>&1 +} + + +# func_mkdir_p directory-path +# Make sure the entire path to DIRECTORY-PATH is available. +func_mkdir_p () +{ + my_directory_path="$1" + my_dir_list= + + if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then + + # Protect directory names starting with `-' + case $my_directory_path in + -*) my_directory_path="./$my_directory_path" ;; + esac + + # While some portion of DIR does not yet exist... + while test ! -d "$my_directory_path"; do + # ...make a list in topmost first order. Use a colon delimited + # list incase some portion of path contains whitespace. + my_dir_list="$my_directory_path:$my_dir_list" + + # If the last portion added has no slash in it, the list is done + case $my_directory_path in */*) ;; *) break ;; esac + + # ...otherwise throw away the child directory and loop + my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"` + done + my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'` + + save_mkdir_p_IFS="$IFS"; IFS=':' + for my_dir in $my_dir_list; do + IFS="$save_mkdir_p_IFS" + # mkdir can fail with a `File exist' error if two processes + # try to create one of the directories concurrently. Don't + # stop in that case! + $MKDIR "$my_dir" 2>/dev/null || : + done + IFS="$save_mkdir_p_IFS" + + # Bail out if we (or some other process) failed to create a directory. + test -d "$my_directory_path" || \ + func_fatal_error "Failed to create \`$1'" + fi +} -##################################### -# Shell function definitions: -# This seems to be the best place for them # func_mktempdir [string] # Make a temporary directory that won't clash with other running @@ -167,7 +558,7 @@ func_mktempdir () { my_template="${TMPDIR-/tmp}/${1-$progname}" - if test "$run" = ":"; then + if test "$opt_dry_run" = ":"; then # Return a directory name, but don't create it in dry-run mode my_tmpdir="${my_template}-$$" else @@ -176,71 +567,804 @@ func_mktempdir () my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` if test ! -d "$my_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" + # Failing that, at least try and use $RANDOM to avoid a race + my_tmpdir="${my_template}-${RANDOM-0}$$" - save_mktempdir_umask=`umask` - umask 0077 - $mkdir "$my_tmpdir" - umask $save_mktempdir_umask + save_mktempdir_umask=`umask` + umask 0077 + $MKDIR "$my_tmpdir" + umask $save_mktempdir_umask fi # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || { - $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 - exit $EXIT_FAILURE - } + test -d "$my_tmpdir" || \ + func_fatal_error "cannot create temporary directory \`$my_tmpdir'" fi - $echo "X$my_tmpdir" | $Xsed + $ECHO "$my_tmpdir" } -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -func_win32_libid () +# func_quote_for_eval arg +# Aesthetically quote ARG to be evaled later. +# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT +# is double-quoted, suitable for a subsequent eval, whereas +# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters +# which are still active within double quotes backslashified. +func_quote_for_eval () { - win32_libid_type="unknown" - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ - $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | \ - $SED -n -e '1,100{ - / I /{ - s,.*,import, - p - q - } - }'` - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; - esac + case $1 in + *[\\\`\"\$]*) + func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;; + *) + func_quote_for_eval_unquoted_result="$1" ;; + esac + + case $func_quote_for_eval_unquoted_result in + # Double-quote args containing shell metacharacters to delay + # word splitting, command substitution and and variable + # expansion for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" + ;; + *) + func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" + esac +} + + +# func_quote_for_expand arg +# Aesthetically quote ARG to be evaled later; same as above, +# but do not quote variable references. +func_quote_for_expand () +{ + case $1 in + *[\\\`\"]*) + my_arg=`$ECHO "$1" | $SED \ + -e "$double_quote_subst" -e "$sed_double_backslash"` ;; + *) + my_arg="$1" ;; + esac + + case $my_arg in + # Double-quote args containing shell metacharacters to delay + # word splitting and command substitution for a subsequent eval. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + my_arg="\"$my_arg\"" + ;; + esac + + func_quote_for_expand_result="$my_arg" +} + + +# func_show_eval cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. +func_show_eval () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$my_cmd" + my_status=$? + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi fi +} + + +# func_show_eval_locale cmd [fail_exp] +# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is +# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP +# is given, then evaluate it. Use the saved locale for evaluation. +func_show_eval_locale () +{ + my_cmd="$1" + my_fail_exp="${2-:}" + + ${opt_silent-false} || { + func_quote_for_expand "$my_cmd" + eval "func_echo $func_quote_for_expand_result" + } + + if ${opt_dry_run-false}; then :; else + eval "$lt_user_locale + $my_cmd" + my_status=$? + eval "$lt_safe_locale" + if test "$my_status" -eq 0; then :; else + eval "(exit $my_status); $my_fail_exp" + fi + fi +} + +# func_tr_sh +# Turn $1 into a string suitable for a shell variable name. +# Result is stored in $func_tr_sh_result. All characters +# not in the set a-zA-Z0-9_ are replaced with '_'. Further, +# if $1 begins with a digit, a '_' is prepended as well. +func_tr_sh () +{ + case $1 in + [0-9]* | *[!a-zA-Z0-9_]*) + func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'` ;; - *DLL*) - win32_libid_type="x86 DLL" + * ) + func_tr_sh_result=$1 ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" + esac +} + + +# func_version +# Echo version message to standard output and exit. +func_version () +{ + $opt_debug + + $SED -n '/(C)/!b go + :more + /\./!{ + N + s/\n# / / + b more + } + :go + /^# '$PROGRAM' (GNU /,/# warranty; / { + s/^# // + s/^# *$// + s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ + p + }' < "$progpath" + exit $? +} + +# func_usage +# Echo short help message to standard output and exit. +func_usage () +{ + $opt_debug + + $SED -n '/^# Usage:/,/^# *.*--help/ { + s/^# // + s/^# *$// + s/\$progname/'$progname'/ + p + }' < "$progpath" + echo + $ECHO "run \`$progname --help | more' for full usage" + exit $? +} + +# func_help [NOEXIT] +# Echo long help message to standard output and exit, +# unless 'noexit' is passed as argument. +func_help () +{ + $opt_debug + + $SED -n '/^# Usage:/,/# Report bugs to/ { + :print + s/^# // + s/^# *$// + s*\$progname*'$progname'* + s*\$host*'"$host"'* + s*\$SHELL*'"$SHELL"'* + s*\$LTCC*'"$LTCC"'* + s*\$LTCFLAGS*'"$LTCFLAGS"'* + s*\$LD*'"$LD"'* + s/\$with_gnu_ld/'"$with_gnu_ld"'/ + s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ + p + d + } + /^# .* home page:/b print + /^# General help using/b print + ' < "$progpath" + ret=$? + if test -z "$1"; then + exit $ret + fi +} + +# func_missing_arg argname +# Echo program name prefixed message to standard error and set global +# exit_cmd. +func_missing_arg () +{ + $opt_debug + + func_error "missing argument for $1." + exit_cmd=exit +} + + +# func_split_short_opt shortopt +# Set func_split_short_opt_name and func_split_short_opt_arg shell +# variables after splitting SHORTOPT after the 2nd character. +func_split_short_opt () +{ + my_sed_short_opt='1s/^\(..\).*$/\1/;q' + my_sed_short_rest='1s/^..\(.*\)$/\1/;q' + + func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"` + func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"` +} # func_split_short_opt may be replaced by extended shell implementation + + +# func_split_long_opt longopt +# Set func_split_long_opt_name and func_split_long_opt_arg shell +# variables after splitting LONGOPT at the `=' sign. +func_split_long_opt () +{ + my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q' + my_sed_long_arg='1s/^--[^=]*=//' + + func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"` + func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"` +} # func_split_long_opt may be replaced by extended shell implementation + +exit_cmd=: + + + + + +magic="%%%MAGIC variable%%%" +magic_exe="%%%MAGIC EXE variable%%%" + +# Global variables. +nonopt= +preserve_args= +lo2o="s/\\.lo\$/.${objext}/" +o2lo="s/\\.${objext}\$/.lo/" +extracted_archives= +extracted_serial=0 + +# If this variable is set in any of the actions, the command in it +# will be execed at the end. This prevents here-documents from being +# left over by shells. +exec_cmd= + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "${1}=\$${1}\${2}" +} # func_append may be replaced by extended shell implementation + +# func_append_quoted var value +# Quote VALUE and append to the end of shell variable VAR, separated +# by a space. +func_append_quoted () +{ + func_quote_for_eval "${2}" + eval "${1}=\$${1}\\ \$func_quote_for_eval_result" +} # func_append_quoted may be replaced by extended shell implementation + + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "${@}"` +} # func_arith may be replaced by extended shell implementation + + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len` +} # func_len may be replaced by extended shell implementation + + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"` +} # func_lo2o may be replaced by extended shell implementation + + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'` +} # func_xform may be replaced by extended shell implementation + + +# func_fatal_configuration arg... +# Echo program name prefixed message to standard error, followed by +# a configuration failure hint, and exit. +func_fatal_configuration () +{ + func_error ${1+"$@"} + func_error "See the $PACKAGE documentation for more information." + func_fatal_error "Fatal configuration error." +} + + +# func_config +# Display the configuration for all the tags in this script. +func_config () +{ + re_begincf='^# ### BEGIN LIBTOOL' + re_endcf='^# ### END LIBTOOL' + + # Default configuration. + $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" + + # Now print the configurations for the tags. + for tagname in $taglist; do + $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" + done + + exit $? +} + +# func_features +# Display the features supported by this script. +func_features () +{ + echo "host: $host" + if test "$build_libtool_libs" = yes; then + echo "enable shared libraries" + else + echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then + echo "enable static libraries" + else + echo "disable static libraries" + fi + + exit $? +} + +# func_enable_tag tagname +# Verify that TAGNAME is valid, and either flag an error and exit, or +# enable the TAGNAME tag. We also add TAGNAME to the global $taglist +# variable here. +func_enable_tag () +{ + # Global variable: + tagname="$1" + + re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" + re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" + sed_extractcf="/$re_begincf/,/$re_endcf/p" + + # Validate tagname. + case $tagname in + *[!-_A-Za-z0-9,/]*) + func_fatal_error "invalid tag name: $tagname" ;; + esac + + # Don't test for the "default" C tag, as we know it's + # there but not specially marked. + case $tagname in + CC) ;; + *) + if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then + taglist="$taglist $tagname" + + # Evaluate the configuration. Be careful to quote the path + # and the sed script, to avoid splitting on whitespace, but + # also don't use non-portable quotes within backquotes within + # quotes we have to do it in 2 steps: + extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` + eval "$extractedcf" + else + func_error "ignoring unknown tag $tagname" + fi + ;; + esac +} + +# func_check_version_match +# Ensure that we are using m4 macros, and libtool script from the same +# release of libtool. +func_check_version_match () +{ + if test "$package_revision" != "$macro_revision"; then + if test "$VERSION" != "$macro_version"; then + if test -z "$macro_version"; then + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from an older release. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, but the +$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. +$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION +$progname: and run autoconf again. +_LT_EOF + fi + else + cat >&2 <<_LT_EOF +$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, +$progname: but the definition of this LT_INIT comes from revision $macro_revision. +$progname: You should recreate aclocal.m4 with macros from revision $package_revision +$progname: of $PACKAGE $VERSION and run autoconf again. +_LT_EOF + fi + + exit $EXIT_MISMATCH + fi +} + + +# Shorthand for --mode=foo, only valid as the first argument +case $1 in +clean|clea|cle|cl) + shift; set dummy --mode clean ${1+"$@"}; shift + ;; +compile|compil|compi|comp|com|co|c) + shift; set dummy --mode compile ${1+"$@"}; shift + ;; +execute|execut|execu|exec|exe|ex|e) + shift; set dummy --mode execute ${1+"$@"}; shift + ;; +finish|finis|fini|fin|fi|f) + shift; set dummy --mode finish ${1+"$@"}; shift + ;; +install|instal|insta|inst|ins|in|i) + shift; set dummy --mode install ${1+"$@"}; shift + ;; +link|lin|li|l) + shift; set dummy --mode link ${1+"$@"}; shift + ;; +uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) + shift; set dummy --mode uninstall ${1+"$@"}; shift + ;; +esac + + + +# Option defaults: +opt_debug=: +opt_dry_run=false +opt_config=false +opt_preserve_dup_deps=false +opt_features=false +opt_finish=false +opt_help=false +opt_help_all=false +opt_silent=: +opt_warning=: +opt_verbose=: +opt_silent=false +opt_verbose=false + + +# Parse options once, thoroughly. This comes as soon as possible in the +# script to make things like `--version' happen as quickly as we can. +{ + # this just eases exit handling + while test $# -gt 0; do + opt="$1" + shift + case $opt in + --debug|-x) opt_debug='set -x' + func_echo "enabling shell trace mode" + $opt_debug + ;; + --dry-run|--dryrun|-n) + opt_dry_run=: + ;; + --config) + opt_config=: +func_config + ;; + --dlopen|-dlopen) + optarg="$1" + opt_dlopen="${opt_dlopen+$opt_dlopen +}$optarg" + shift + ;; + --preserve-dup-deps) + opt_preserve_dup_deps=: + ;; + --features) + opt_features=: +func_features + ;; + --finish) + opt_finish=: +set dummy --mode finish ${1+"$@"}; shift + ;; + --help) + opt_help=: + ;; + --help-all) + opt_help_all=: +opt_help=': help-all' + ;; + --mode) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_mode="$optarg" +case $optarg in + # Valid mode arguments: + clean|compile|execute|finish|install|link|relink|uninstall) ;; + + # Catch anything else as an error + *) func_error "invalid argument for $opt" + exit_cmd=exit + break + ;; +esac + shift + ;; + --no-silent|--no-quiet) + opt_silent=false +func_append preserve_args " $opt" + ;; + --no-warning|--no-warn) + opt_warning=false +func_append preserve_args " $opt" + ;; + --no-verbose) + opt_verbose=false +func_append preserve_args " $opt" + ;; + --silent|--quiet) + opt_silent=: +func_append preserve_args " $opt" + opt_verbose=false + ;; + --verbose|-v) + opt_verbose=: +func_append preserve_args " $opt" +opt_silent=false + ;; + --tag) + test $# = 0 && func_missing_arg $opt && break + optarg="$1" + opt_tag="$optarg" +func_append preserve_args " $opt $optarg" +func_enable_tag "$optarg" + shift + ;; + + -\?|-h) func_usage ;; + --help) func_help ;; + --version) func_version ;; + + # Separate optargs to long options: + --*=*) + func_split_long_opt "$opt" + set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"} + shift + ;; + + # Separate non-argument short options: + -\?*|-h*|-n*|-v*) + func_split_short_opt "$opt" + set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"} + shift + ;; + + --) break ;; + -*) func_fatal_help "unrecognized option \`$opt'" ;; + *) set dummy "$opt" ${1+"$@"}; shift; break ;; + esac + done + + # Validate options: + + # save first non-option argument + if test "$#" -gt 0; then + nonopt="$opt" + shift + fi + + # preserve --debug + test "$opt_debug" = : || func_append preserve_args " --debug" + + case $host in + *cygwin* | *mingw* | *pw32* | *cegcc*) + # don't eliminate duplications in $postdeps and $predeps + opt_duplicate_compiler_generated_deps=: + ;; + *) + opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps + ;; + esac + + $opt_help || { + # Sanity checks first: + func_check_version_match + + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then + func_fatal_configuration "not configured to build any kind of library" + fi + + # Darwin sucks + eval std_shrext=\"$shrext_cmds\" + + # Only execute mode is allowed to have -dlopen flags. + if test -n "$opt_dlopen" && test "$opt_mode" != execute; then + func_error "unrecognized option \`-dlopen'" + $ECHO "$help" 1>&2 + exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. + generic_help="$help" + help="Try \`$progname --help --mode=$opt_mode' for more information." + } + + + # Bail if the options were screwed + $exit_cmd $EXIT_FAILURE +} + + + + +## ----------- ## +## Main. ## +## ----------- ## + +# func_lalib_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_lalib_p () +{ + test -f "$1" && + $SED -e 4q "$1" 2>/dev/null \ + | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 +} + +# func_lalib_unsafe_p file +# True iff FILE is a libtool `.la' library or `.lo' object file. +# This function implements the same check as func_lalib_p without +# resorting to external programs. To this end, it redirects stdin and +# closes it afterwards, without saving the original file descriptor. +# As a safety measure, use it only where a negative result would be +# fatal anyway. Works if `file' does not exist. +func_lalib_unsafe_p () +{ + lalib_p=no + if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then + for lalib_p_l in 1 2 3 4 + do + read lalib_p_line + case "$lalib_p_line" in + \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; + esac + done + exec 0<&5 5<&- + fi + test "$lalib_p" = yes +} + +# func_ltwrapper_script_p file +# True iff FILE is a libtool wrapper script +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_script_p () +{ + func_lalib_p "$1" +} + +# func_ltwrapper_executable_p file +# True iff FILE is a libtool wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_executable_p () +{ + func_ltwrapper_exec_suffix= + case $1 in + *.exe) ;; + *) func_ltwrapper_exec_suffix=.exe ;; + esac + $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 +} + +# func_ltwrapper_scriptname file +# Assumes file is an ltwrapper_executable +# uses $file to determine the appropriate filename for a +# temporary ltwrapper_script. +func_ltwrapper_scriptname () +{ + func_dirname_and_basename "$1" "" "." + func_stripname '' '.exe' "$func_basename_result" + func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" +} + +# func_ltwrapper_p file +# True iff FILE is a libtool wrapper script or wrapper executable +# This function is only a basic sanity check; it will hardly flush out +# determined imposters. +func_ltwrapper_p () +{ + func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" +} + + +# func_execute_cmds commands fail_cmd +# Execute tilde-delimited COMMANDS. +# If FAIL_CMD is given, eval that upon failure. +# FAIL_CMD may read-access the current command in variable CMD! +func_execute_cmds () +{ + $opt_debug + save_ifs=$IFS; IFS='~' + for cmd in $1; do + IFS=$save_ifs + eval cmd=\"$cmd\" + func_show_eval "$cmd" "${2-:}" + done + IFS=$save_ifs +} + + +# func_source file +# Source FILE, adding directory component if necessary. +# Note that it is not necessary on cygwin/mingw to append a dot to +# FILE even if both FILE and FILE.exe exist: automatic-append-.exe +# behavior happens only for exec(3), not for open(2)! Also, sourcing +# `FILE.' does not work on cygwin managed mounts. +func_source () +{ + $opt_debug + case $1 in + */* | *\\*) . "$1" ;; + *) . "./$1" ;; esac +} + + +# func_resolve_sysroot PATH +# Replace a leading = in PATH with a sysroot. Store the result into +# func_resolve_sysroot_result +func_resolve_sysroot () +{ + func_resolve_sysroot_result=$1 + case $func_resolve_sysroot_result in + =*) + func_stripname '=' '' "$func_resolve_sysroot_result" + func_resolve_sysroot_result=$lt_sysroot$func_stripname_result ;; esac - $echo $win32_libid_type } +# func_replace_sysroot PATH +# If PATH begins with the sysroot, replace it with = and +# store the result into func_replace_sysroot_result. +func_replace_sysroot () +{ + case "$lt_sysroot:$1" in + ?*:"$lt_sysroot"*) + func_stripname "$lt_sysroot" '' "$1" + func_replace_sysroot_result="=$func_stripname_result" + ;; + *) + # Including no sysroot. + func_replace_sysroot_result=$1 + ;; + esac +} # func_infer_tag arg # Infer tagged configuration to use if any are available and @@ -250,9 +1374,11 @@ func_win32_libid () # arg is usually of the form 'gcc ...' func_infer_tag () { + $opt_debug + # FreeBSD-specific: where we install compilers with non-standard names - tag_compilers_CC="*cc cc* *gcc gcc*" - tag_compilers_CXX="*c++ c++* *g++ g++*" + tag_compilers_CC="*cc cc* *gcc gcc* clang" + tag_compilers_CXX="*c++ c++* *g++ g++* clang++" base_compiler=`set -- "$@"; echo $1` # If $tagname isn't set, then try to infer if the default "CC" tag applies @@ -267,36 +1393,32 @@ func_infer_tag () if test -n "$available_tags" && test -z "$tagname"; then CC_quoted= for arg in $CC; do - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" + func_append_quoted CC_quoted "$arg" done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` case $@ in # Blanks in the command may have been stripped by the calling shell, # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;; # Blanks at the start of $base_compile will cause this to fail # if we don't check for them as well. *) for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then + if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then # Evaluate the configuration. eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" CC_quoted= for arg in $CC; do - # Double-quote args containing other shell metacharacters. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - CC_quoted="$CC_quoted $arg" - done + # Double-quote args containing other shell metacharacters. + func_append_quoted CC_quoted "$arg" + done + CC_expanded=`func_echo_all $CC` + CC_quoted_expanded=`func_echo_all $CC_quoted` case "$@ " in - " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) + " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \ + " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) # The compiler in the base compile command matches # the one in the tagged configuration. # Assume this is the tagged configuration we want. @@ -325,11 +1447,10 @@ func_infer_tag () # was found and let the user know that the "--tag" command # line option must be used. if test -z "$tagname"; then - $echo "$modename: unable to infer tagged configuration" - $echo "$modename: specify a tag with \`--tag'" 1>&2 - exit $EXIT_FAILURE -# else -# $echo "$modename: using $tagname tagged configuration" + func_echo "unable to infer tagged configuration" + func_fatal_error "specify a tag with \`--tag'" +# else +# func_verbose "using $tagname tagged configuration" fi ;; esac @@ -337,354 +1458,528 @@ func_infer_tag () } -# func_extract_an_archive dir oldlib -func_extract_an_archive () + +# func_write_libtool_object output_name pic_name nonpic_name +# Create a libtool object file (analogous to a ".la" file), +# but don't create it if we're doing a dry run. +func_write_libtool_object () { - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" + write_libobj=${1} + if test "$build_libtool_libs" = yes; then + write_lobj=\'${2}\' + else + write_lobj=none + fi - $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" - $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : + if test "$build_old_libs" = yes; then + write_oldobj=\'${3}\' else - $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 - exit $EXIT_FAILURE + write_oldobj=none fi + + $opt_dry_run || { + cat >${write_libobj}T <<EOF +# $write_libobj - a libtool object file +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# Please DO NOT delete this file! +# It is necessary for linking the library. + +# Name of the PIC object. +pic_object=$write_lobj + +# Name of the non-PIC object +non_pic_object=$write_oldobj + +EOF + $MV "${write_libobj}T" "${write_libobj}" + } } -# func_extract_archives gentop oldlib ... -func_extract_archives () + +################################################## +# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS # +################################################## + +# func_convert_core_file_wine_to_w32 ARG +# Helper function used by file name conversion functions when $build is *nix, +# and $host is mingw, cygwin, or some other w32 environment. Relies on a +# correctly configured wine environment available, with the winepath program +# in $build's $PATH. +# +# ARG is the $build file name to be converted to w32 format. +# Result is available in $func_convert_core_file_wine_to_w32_result, and will +# be empty on error (or when ARG is empty) +func_convert_core_file_wine_to_w32 () { - my_gentop="$1"; shift - my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" - my_status="" - - $show "${rm}r $my_gentop" - $run ${rm}r "$my_gentop" - $show "$mkdir $my_gentop" - $run $mkdir "$my_gentop" - my_status=$? - if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then - exit $my_status + $opt_debug + func_convert_core_file_wine_to_w32_result="$1" + if test -n "$1"; then + # Unfortunately, winepath does not exit with a non-zero error code, so we + # are forced to check the contents of stdout. On the other hand, if the + # command is not found, the shell will set an exit code of 127 and print + # *an error message* to stdout. So we must check for both error code of + # zero AND non-empty stdout, which explains the odd construction: + func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null` + if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then + func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" | + $SED -e "$lt_sed_naive_backslashify"` + else + func_convert_core_file_wine_to_w32_result= fi + fi +} +# end: func_convert_core_file_wine_to_w32 - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` - my_xlib_u=$my_xlib - while :; do - case " $extracted_archives " in - *" $my_xlib_u "*) - extracted_serial=`expr $extracted_serial + 1` - my_xlib_u=lt$extracted_serial-$my_xlib ;; - *) break ;; - esac - done - extracted_archives="$extracted_archives $my_xlib_u" - my_xdir="$my_gentop/$my_xlib_u" - $show "${rm}r $my_xdir" - $run ${rm}r "$my_xdir" - $show "$mkdir $my_xdir" - $run $mkdir "$my_xdir" - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then - exit $exit_status +# func_convert_core_path_wine_to_w32 ARG +# Helper function used by path conversion functions when $build is *nix, and +# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly +# configured wine environment available, with the winepath program in $build's +# $PATH. Assumes ARG has no leading or trailing path separator characters. +# +# ARG is path to be converted from $build format to win32. +# Result is available in $func_convert_core_path_wine_to_w32_result. +# Unconvertible file (directory) names in ARG are skipped; if no directory names +# are convertible, then the result may be empty. +func_convert_core_path_wine_to_w32 () +{ + $opt_debug + # unfortunately, winepath doesn't convert paths, only file names + func_convert_core_path_wine_to_w32_result="" + if test -n "$1"; then + oldIFS=$IFS + IFS=: + for func_convert_core_path_wine_to_w32_f in $1; do + IFS=$oldIFS + func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f" + if test -n "$func_convert_core_file_wine_to_w32_result" ; then + if test -z "$func_convert_core_path_wine_to_w32_result"; then + func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result" + else + func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result" + fi fi - case $host in - *-darwin*) - $show "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - if test -z "$run"; then - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` - darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` - if test -n "$darwin_arches"; then - darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - $show "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" - cd "$darwin_curdir" - $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" - done # $darwin_arches - ## Okay now we have a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` - lipo -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - ${rm}r unfat-$$ - cd "$darwin_orig_dir" - else - cd "$darwin_orig_dir" - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - fi # $run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` done - func_extract_archives_result="$my_oldobjs" + IFS=$oldIFS + fi +} +# end: func_convert_core_path_wine_to_w32 + + +# func_cygpath ARGS... +# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when +# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2) +# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or +# (2), returns the Cygwin file name or path in func_cygpath_result (input +# file name or path is assumed to be in w32 format, as previously converted +# from $build's *nix or MSYS format). In case (3), returns the w32 file name +# or path in func_cygpath_result (input file name or path is assumed to be in +# Cygwin format). Returns an empty string on error. +# +# ARGS are passed to cygpath, with the last one being the file name or path to +# be converted. +# +# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH +# environment variable; do not put it in $PATH. +func_cygpath () +{ + $opt_debug + if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then + func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null` + if test "$?" -ne 0; then + # on failure, ensure result is empty + func_cygpath_result= + fi + else + func_cygpath_result= + func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'" + fi } -# End of Shell function definitions -##################################### +#end: func_cygpath -# Darwin sucks -eval std_shrext=\"$shrext_cmds\" -disable_libs=no +# func_convert_core_msys_to_w32 ARG +# Convert file name or path ARG from MSYS format to w32 format. Return +# result in func_convert_core_msys_to_w32_result. +func_convert_core_msys_to_w32 () +{ + $opt_debug + # awkward: cmd appends spaces to result + func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null | + $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"` +} +#end: func_convert_core_msys_to_w32 -# Parse our command line options once, thoroughly. -while test "$#" -gt 0 -do - arg="$1" - shift - case $arg in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; +# func_convert_file_check ARG1 ARG2 +# Verify that ARG1 (a file name in $build format) was converted to $host +# format in ARG2. Otherwise, emit an error message, but continue (resetting +# func_to_host_file_result to ARG1). +func_convert_file_check () +{ + $opt_debug + if test -z "$2" && test -n "$1" ; then + func_error "Could not determine host file name corresponding to" + func_error " \`$1'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback: + func_to_host_file_result="$1" + fi +} +# end func_convert_file_check + + +# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH +# Verify that FROM_PATH (a path in $build format) was converted to $host +# format in TO_PATH. Otherwise, emit an error message, but continue, resetting +# func_to_host_file_result to a simplistic fallback value (see below). +func_convert_path_check () +{ + $opt_debug + if test -z "$4" && test -n "$3"; then + func_error "Could not determine the host path corresponding to" + func_error " \`$3'" + func_error "Continuing, but uninstalled executables may not work." + # Fallback. This is a deliberately simplistic "conversion" and + # should not be "improved". See libtool.info. + if test "x$1" != "x$2"; then + lt_replace_pathsep_chars="s|$1|$2|g" + func_to_host_path_result=`echo "$3" | + $SED -e "$lt_replace_pathsep_chars"` + else + func_to_host_path_result="$3" + fi + fi +} +# end func_convert_path_check + + +# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG +# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT +# and appending REPL if ORIG matches BACKPAT. +func_convert_path_front_back_pathsep () +{ + $opt_debug + case $4 in + $1 ) func_to_host_path_result="$3$func_to_host_path_result" + ;; esac + case $4 in + $2 ) func_append func_to_host_path_result "$3" + ;; + esac +} +# end func_convert_path_front_back_pathsep - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - execute_dlfiles) - execute_dlfiles="$execute_dlfiles $arg" - ;; - tag) - tagname="$arg" - preserve_args="${preserve_args}=$arg" - - # Check whether tagname contains only valid characters - case $tagname in - *[!-_A-Za-z0-9,/]*) - $echo "$progname: invalid tag name: $tagname" 1>&2 - exit $EXIT_FAILURE - ;; - esac - case $tagname in - CC) - # Don't test for the "default" C tag, as we know, it's there, but - # not specially marked. - ;; - *) - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then - taglist="$taglist $tagname" - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" - else - $echo "$progname: ignoring unknown tag $tagname" 1>&2 - fi - ;; - esac +################################################## +# $build to $host FILE NAME CONVERSION FUNCTIONS # +################################################## +# invoked via `$to_host_file_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# Result will be available in $func_to_host_file_result. + + +# func_to_host_file ARG +# Converts the file name ARG from $build format to $host format. Return result +# in func_to_host_file_result. +func_to_host_file () +{ + $opt_debug + $to_host_file_cmd "$1" +} +# end func_to_host_file + + +# func_to_tool_file ARG LAZY +# converts the file name ARG from $build format to toolchain format. Return +# result in func_to_tool_file_result. If the conversion in use is listed +# in (the comma separated) LAZY, no conversion takes place. +func_to_tool_file () +{ + $opt_debug + case ,$2, in + *,"$to_tool_file_cmd",*) + func_to_tool_file_result=$1 ;; *) - eval "$prev=\$arg" + $to_tool_file_cmd "$1" + func_to_tool_file_result=$func_to_host_file_result ;; - esac + esac +} +# end func_to_tool_file - prev= - prevopt= - continue + +# func_convert_file_noop ARG +# Copy ARG to func_to_host_file_result. +func_convert_file_noop () +{ + func_to_host_file_result="$1" +} +# end func_convert_file_noop + + +# func_convert_file_msys_to_w32 ARG +# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_file_result. +func_convert_file_msys_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_to_host_file_result="$func_convert_core_msys_to_w32_result" fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_w32 - # Have we seen a non-optional argument yet? - case $arg in - --help) - show_help=yes - ;; - --version) - echo "\ -$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP +# func_convert_file_cygwin_to_w32 ARG +# Convert file name ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_file_cygwin_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # because $build is cygwin, we call "the" cygpath in $PATH; no need to use + # LT_CYGPATH in this case. + func_to_host_file_result=`cygpath -m "$1"` + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_cygwin_to_w32 -Copyright (C) 2008 Free Software Foundation, Inc. -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - exit $? - ;; - --config) - ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath - # Now print the configurations for the tags. - for tagname in $taglist; do - ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" - done - exit $? - ;; +# func_convert_file_nix_to_w32 ARG +# Convert file name ARG from *nix to w32 format. Requires a wine environment +# and a working winepath. Returns result in func_to_host_file_result. +func_convert_file_nix_to_w32 () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_file_wine_to_w32 "$1" + func_to_host_file_result="$func_convert_core_file_wine_to_w32_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_w32 - --debug) - $echo "$progname: enabling shell trace mode" - set -x - preserve_args="$preserve_args $arg" - ;; - --dry-run | -n) - run=: - ;; +# func_convert_file_msys_to_cygwin ARG +# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_file_msys_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + func_convert_core_msys_to_w32 "$1" + func_cygpath -u "$func_convert_core_msys_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_msys_to_cygwin - --features) - $echo "host: $host" - if test "$build_libtool_libs" = yes; then - $echo "enable shared libraries" - else - $echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - $echo "enable static libraries" - else - $echo "disable static libraries" - fi - exit $? - ;; - --finish) mode="finish" ;; +# func_convert_file_nix_to_cygwin ARG +# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed +# in a wine environment, working winepath, and LT_CYGPATH set. Returns result +# in func_to_host_file_result. +func_convert_file_nix_to_cygwin () +{ + $opt_debug + func_to_host_file_result="$1" + if test -n "$1"; then + # convert from *nix to w32, then use cygpath to convert from w32 to cygwin. + func_convert_core_file_wine_to_w32 "$1" + func_cygpath -u "$func_convert_core_file_wine_to_w32_result" + func_to_host_file_result="$func_cygpath_result" + fi + func_convert_file_check "$1" "$func_to_host_file_result" +} +# end func_convert_file_nix_to_cygwin - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; - --preserve-dup-deps) duplicate_deps="yes" ;; +############################################# +# $build to $host PATH CONVERSION FUNCTIONS # +############################################# +# invoked via `$to_host_path_cmd ARG' +# +# In each case, ARG is the path to be converted from $build to $host format. +# The result will be available in $func_to_host_path_result. +# +# Path separators are also converted from $build format to $host format. If +# ARG begins or ends with a path separator character, it is preserved (but +# converted to $host format) on output. +# +# All path conversion functions are named using the following convention: +# file name conversion function : func_convert_file_X_to_Y () +# path conversion function : func_convert_path_X_to_Y () +# where, for any given $build/$host combination the 'X_to_Y' value is the +# same. If conversion functions are added for new $build/$host combinations, +# the two new functions must follow this pattern, or func_init_to_host_path_cmd +# will break. + + +# func_init_to_host_path_cmd +# Ensures that function "pointer" variable $to_host_path_cmd is set to the +# appropriate value, based on the value of $to_host_file_cmd. +to_host_path_cmd= +func_init_to_host_path_cmd () +{ + $opt_debug + if test -z "$to_host_path_cmd"; then + func_stripname 'func_convert_file_' '' "$to_host_file_cmd" + to_host_path_cmd="func_convert_path_${func_stripname_result}" + fi +} - --quiet | --silent) - show=: - preserve_args="$preserve_args $arg" - ;; - --tag) - prevopt="--tag" - prev=tag - preserve_args="$preserve_args --tag" - ;; - --tag=*) - set tag "$optarg" ${1+"$@"} - shift - prev=tag - preserve_args="$preserve_args --tag" - ;; +# func_to_host_path ARG +# Converts the path ARG from $build format to $host format. Return result +# in func_to_host_path_result. +func_to_host_path () +{ + $opt_debug + func_init_to_host_path_cmd + $to_host_path_cmd "$1" +} +# end func_to_host_path - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles - ;; - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; +# func_convert_path_noop ARG +# Copy ARG to func_to_host_path_result. +func_convert_path_noop () +{ + func_to_host_path_result="$1" +} +# end func_convert_path_noop - *) - nonopt="$arg" - break - ;; - esac -done -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE -fi +# func_convert_path_msys_to_w32 ARG +# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic +# conversion to w32 is not available inside the cwrapper. Returns result in +# func_to_host_path_result. +func_convert_path_msys_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from ARG. MSYS + # behavior is inconsistent here; cygpath turns them into '.;' and ';.'; + # and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_msys_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_msys_to_w32 -case $disable_libs in -no) - ;; -shared) - build_libtool_libs=no - build_old_libs=yes - ;; -static) - build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` - ;; -esac -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= +# func_convert_path_cygwin_to_w32 ARG +# Convert path ARG from Cygwin to w32 format. Returns result in +# func_to_host_file_result. +func_convert_path_cygwin_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"` + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_cygwin_to_w32 -if test -z "$show_help"; then - # Infer the operation mode. - if test -z "$mode"; then - $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 - $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 - case $nonopt in - *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) - mode=link - for arg - do - case $arg in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall - ;; - *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute +# func_convert_path_nix_to_w32 ARG +# Convert path ARG from *nix to w32 format. Requires a wine environment and +# a working winepath. Returns result in func_to_host_file_result. +func_convert_path_nix_to_w32 () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_to_host_path_result="$func_convert_core_path_wine_to_w32_result" + func_convert_path_check : ";" \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" ";" "$1" + fi +} +# end func_convert_path_nix_to_w32 - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi - fi - ;; - esac + +# func_convert_path_msys_to_cygwin ARG +# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set. +# Returns result in func_to_host_file_result. +func_convert_path_msys_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # See func_convert_path_msys_to_w32: + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_msys_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_msys_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi +} +# end func_convert_path_msys_to_cygwin - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE + +# func_convert_path_nix_to_cygwin ARG +# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a +# a wine environment, working winepath, and LT_CYGPATH set. Returns result in +# func_to_host_file_result. +func_convert_path_nix_to_cygwin () +{ + $opt_debug + func_to_host_path_result="$1" + if test -n "$1"; then + # Remove leading and trailing path separator characters from + # ARG. msys behavior is inconsistent here, cygpath turns them + # into '.;' and ';.', and winepath ignores them completely. + func_stripname : : "$1" + func_to_host_path_tmp1=$func_stripname_result + func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1" + func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result" + func_to_host_path_result="$func_cygpath_result" + func_convert_path_check : : \ + "$func_to_host_path_tmp1" "$func_to_host_path_result" + func_convert_path_front_back_pathsep ":*" "*:" : "$1" fi +} +# end func_convert_path_nix_to_cygwin - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." - # These modes are in order of execution frequency so that they run quickly. - case $mode in - # libtool compile mode - compile) - modename="$modename: compile" +# func_mode_compile arg... +func_mode_compile () +{ + $opt_debug # Get the compilation command and the source file. base_compile= srcfile="$nonopt" # always keep a non-empty value in "srcfile" @@ -693,6 +1988,7 @@ if test -z "$show_help"; then arg_mode=normal libobj= later= + pie_flag= for arg do @@ -713,16 +2009,19 @@ if test -z "$show_help"; then # Accept any command-line options. case $arg in -o) - if test -n "$libobj" ; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit $EXIT_FAILURE - fi + test -n "$libobj" && \ + func_fatal_error "you cannot specify \`-o' more than once" arg_mode=target continue ;; - -static | -prefer-pic | -prefer-non-pic) - later="$later $arg" + -pie | -fpie | -fPIE) + func_append pie_flag " $arg" + continue + ;; + + -shared | -static | -prefer-pic | -prefer-non-pic) + func_append later " $arg" continue ;; @@ -737,31 +2036,24 @@ if test -z "$show_help"; then ;; # replaced later. I would guess that would be a bug. -Wc,*) - args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result lastarg= save_ifs="$IFS"; IFS=',' - for arg in $args; do + for arg in $args; do IFS="$save_ifs" - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - lastarg="$lastarg $arg" + func_append_quoted lastarg "$arg" done IFS="$save_ifs" - lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + func_stripname ' ' '' "$lastarg" + lastarg=$func_stripname_result # Add the arguments to base_compile. - base_compile="$base_compile $lastarg" + func_append base_compile " $lastarg" continue ;; - * ) + *) # Accept the current argument as the source file. # The previous "srcfile" becomes the current argument. # @@ -773,66 +2065,41 @@ if test -z "$show_help"; then esac # case $arg_mode # Aesthetically quote the previous argument. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - - case $lastarg in - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, and some SunOS ksh mistreat backslash-escaping - # in scan sets (worked around with variable expansion), - # and furthermore cannot handle '|' '&' '(' ')' in scan sets - # at all, so we specify them separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - lastarg="\"$lastarg\"" - ;; - esac - - base_compile="$base_compile $lastarg" + func_append_quoted base_compile "$lastarg" done # for arg case $arg_mode in arg) - $echo "$modename: you must specify an argument for -Xcompile" - exit $EXIT_FAILURE + func_fatal_error "you must specify an argument for -Xcompile" ;; target) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "you must specify a target with \`-o'" ;; *) # Get the name of the library object. - [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + test -z "$libobj" && { + func_basename "$srcfile" + libobj="$func_basename_result" + } ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSifmso]' case $libobj in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.ii) xform=ii ;; - *.class) xform=class ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.[fF][09]?) xform=[fF][09]. ;; - *.for) xform=for ;; - *.java) xform=java ;; - *.obj) xform=obj ;; - *.sx) xform=sx ;; + *.[cCFSifmso] | \ + *.ada | *.adb | *.ads | *.asm | \ + *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ + *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) + func_xform "$libobj" + libobj=$func_xform_result + ;; esac - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - case $libobj in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot determine name of library object from \`$libobj'" ;; esac @@ -840,7 +2107,15 @@ if test -z "$show_help"; then for arg in $later; do case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + continue + ;; + -static) + build_libtool_libs=no build_old_libs=yes continue ;; @@ -857,28 +2132,17 @@ if test -z "$show_help"; then esac done - qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` - case $qlibobj in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qlibobj="\"$qlibobj\"" ;; - esac - test "X$libobj" != "X$qlibobj" \ - && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." - objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir= - else - xdir=$xdir/ - fi + func_quote_for_eval "$libobj" + test "X$libobj" != "X$func_quote_for_eval_result" \ + && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ + && func_warning "libobj name \`$libobj' may not contain shell special characters." + func_dirname_and_basename "$obj" "/" "" + objname="$func_basename_result" + xdir="$func_dirname_result" lobj=${xdir}$objdir/$objname - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test -z "$base_compile" && \ + func_fatal_help "you must specify a compilation command" # Delete any leftover library objects. if test "$build_old_libs" = yes; then @@ -887,12 +2151,9 @@ if test -z "$show_help"; then removelist="$lobj $libobj ${libobj}T" fi - $run $rm $removelist - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 - # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in - cygwin* | mingw* | pw32* | os2*) + cygwin* | mingw* | pw32* | os2* | cegcc*) pic_mode=default ;; esac @@ -904,10 +2165,8 @@ if test -z "$show_help"; then # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" - removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 else output_obj= need_locks=no @@ -917,13 +2176,13 @@ if test -z "$show_help"; then # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until $run ln "$progpath" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then - $echo "\ + $ECHO "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` @@ -934,34 +2193,21 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist + $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi - $echo "$srcfile" > "$lockfile" - fi - - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" + func_append removelist " $output_obj" + $ECHO "$srcfile" > "$lockfile" fi - qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` - case $qsrcfile in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qsrcfile="\"$qsrcfile\"" ;; - esac - $run $rm "$libobj" "${libobj}T" + $opt_dry_run || $RM $removelist + func_append removelist " $lockfile" + trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - # Create a libtool object file (analogous to a ".la" file), - # but don't create it if we're doing a dry run. - test -z "$run" && cat > ${libobj}T <<EOF -# $libobj - a libtool object file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# Name of the PIC object. -EOF + func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 + srcfile=$func_to_tool_file_result + func_quote_for_eval "$srcfile" + qsrcfile=$func_quote_for_eval_result # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then @@ -975,32 +2221,19 @@ EOF command="$base_compile $qsrcfile" fi - if test ! -d "${xdir}$objdir"; then - $show "$mkdir ${xdir}$objdir" - $run $mkdir ${xdir}$objdir - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then - exit $exit_status - fi - fi + func_mkdir_p "$xdir$objdir" if test -z "$output_obj"; then # Place PIC objects in $objdir - command="$command -o $lobj" + func_append command " -o $lobj" fi - $run $rm "$lobj" "$output_obj" - - $show "$command" - if $run eval $lt_env "$command"; then : - else - test -n "$output_obj" && $run $rm $removelist - exit $EXIT_FAILURE - fi + func_show_eval_locale "$command" \ + 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $echo "\ + $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -1014,65 +2247,42 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist + $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed, then go on to compile the next one if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - $show "$mv $output_obj $lobj" - if $run $mv $output_obj $lobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi + func_show_eval '$MV "$output_obj" "$lobj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' fi - # Append the name of the PIC object to the libtool object file. - test -z "$run" && cat >> ${libobj}T <<EOF -pic_object='$objdir/$objname' - -EOF - # Allow error messages only from the first compilation. if test "$suppress_opt" = yes; then - suppress_output=' >/dev/null 2>&1' + suppress_output=' >/dev/null 2>&1' fi - else - # No PIC object so indicate it doesn't exist in the libtool - # object file. - test -z "$run" && cat >> ${libobj}T <<EOF -pic_object=none - -EOF fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code - command="$base_compile $qsrcfile" + command="$base_compile $qsrcfile$pie_flag" else command="$base_compile $qsrcfile $pic_flag" fi if test "$compiler_c_o" = yes; then - command="$command -o $obj" + func_append command " -o $obj" fi # Suppress compiler output if we already did a PIC compilation. - command="$command$suppress_output" - $run $rm "$obj" "$output_obj" - $show "$command" - if $run eval $lt_env "$command"; then : - else - $run $rm $removelist - exit $EXIT_FAILURE - fi + func_append command "$suppress_output" + func_show_eval_locale "$command" \ + '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' if test "$need_locks" = warn && test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $echo "\ + $ECHO "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` @@ -1086,53 +2296,2838 @@ repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." - $run $rm $removelist + $opt_dry_run || $RM $removelist exit $EXIT_FAILURE fi # Just move the object if needed if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : + func_show_eval '$MV "$output_obj" "$obj"' \ + 'error=$?; $opt_dry_run || $RM $removelist; exit $error' + fi + fi + + $opt_dry_run || { + func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" + + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + removelist=$lockfile + $RM "$lockfile" + fi + } + + exit $EXIT_SUCCESS +} + +$opt_help || { + test "$opt_mode" = compile && func_mode_compile ${1+"$@"} +} + +func_mode_help () +{ + # We need to display help for each of the modes. + case $opt_mode in + "") + # Generic help is extracted from the usage comments + # at the start of this file. + func_help + ;; + + clean) + $ECHO \ +"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + + compile) + $ECHO \ +"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE + +Compile a source file into a libtool library object. + +This mode accepts the following additional options: + + -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -no-suppress do not suppress compiler output for multiple passes + -prefer-pic try to build PIC objects only + -prefer-non-pic try to build non-PIC objects only + -shared do not build a \`.o' file suitable for static linking + -static only build a \`.o' file suitable for static linking + -Wc,FLAG pass FLAG directly to the compiler + +COMPILE-COMMAND is a command to be used in creating a \`standard' object file +from the given SOURCEFILE. + +The output file name is determined by removing the directory component from +SOURCEFILE, then substituting the C source code suffix \`.c' with the +library object suffix, \`.lo'." + ;; + + execute) + $ECHO \ +"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... + +Automatically set library path, then run a program. + +This mode accepts the following additional options: + + -dlopen FILE add the directory containing FILE to the library path + +This mode sets the library path environment variable according to \`-dlopen' +flags. + +If any of the ARGS are libtool executable wrappers, then they are translated +into their corresponding uninstalled binary, and any of their required library +directories are added to the library path. + +Then, COMMAND is executed, with ARGS as arguments." + ;; + + finish) + $ECHO \ +"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... + +Complete the installation of libtool libraries. + +Each LIBDIR is a directory that contains libtool libraries. + +The commands that this mode executes may require superuser privileges. Use +the \`--dry-run' option if you just want to see what would be executed." + ;; + + install) + $ECHO \ +"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... + +Install executables or libraries. + +INSTALL-COMMAND is the installation command. The first component should be +either the \`install' or \`cp' program. + +The following components of INSTALL-COMMAND are treated specially: + + -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation + +The rest of the components are interpreted as arguments to that command (only +BSD-compatible install options are recognized)." + ;; + + link) + $ECHO \ +"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... + +Link object files or libraries together to form another library, or to +create an executable program. + +LINK-COMMAND is a command using the C compiler that you would use to create +a program from several object files. + +The following components of LINK-COMMAND are treated specially: + + -all-static do not do any dynamic linking at all + -avoid-version do not add a version suffix if possible + -bindir BINDIR specify path to binaries directory (for systems where + libraries must be found in the PATH setting at runtime) + -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime + -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols + -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) + -export-symbols SYMFILE + try to export only the symbols listed in SYMFILE + -export-symbols-regex REGEX + try to export only the symbols matching REGEX + -LLIBDIR search LIBDIR for required installed libraries + -lNAME OUTPUT-FILE requires the installed library libNAME + -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects + -objectlist FILE Use a list of object files found in FILE to specify objects + -precious-files-regex REGEX + don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries + -shared only do dynamic linking of libtool libraries + -shrext SUFFIX override the standard shared library file extension + -static do not do any dynamic linking of uninstalled libtool libraries + -static-libtool-libs + do not do any dynamic linking of libtool libraries + -version-info CURRENT[:REVISION[:AGE]] + specify library version info [each variable defaults to 0] + -weak LIBNAME declare that the target provides the LIBNAME interface + -Wc,FLAG + -Xcompiler FLAG pass linker-specific FLAG directly to the compiler + -Wl,FLAG + -Xlinker FLAG pass linker-specific FLAG directly to the linker + -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC) + +All other options (arguments beginning with \`-') are ignored. + +Every other argument is treated as a filename. Files ending in \`.la' are +treated as uninstalled libtool libraries, other files are standard or library +object files. + +If the OUTPUT-FILE ends in \`.la', then a libtool library is created, +only library objects (\`.lo' files) may be specified, and \`-rpath' is +required, except when creating a convenience library. + +If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created +using \`ar' and \`ranlib', or on Windows using \`lib'. + +If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file +is created, otherwise an executable program is created." + ;; + + uninstall) + $ECHO \ +"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... + +Remove libraries from an installation directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, all the files associated with it are deleted. +Otherwise, only FILE itself is deleted using RM." + ;; + + *) + func_fatal_help "invalid operation mode \`$opt_mode'" + ;; + esac + + echo + $ECHO "Try \`$progname --help' for more information about other modes." +} + +# Now that we've collected a possible --mode arg, show help if necessary +if $opt_help; then + if test "$opt_help" = :; then + func_mode_help + else + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + func_mode_help + done + } | sed -n '1p; 2,$s/^Usage:/ or: /p' + { + func_help noexit + for opt_mode in compile link execute install finish uninstall clean; do + echo + func_mode_help + done + } | + sed '1d + /^When reporting/,/^Report/{ + H + d + } + $x + /information about other modes/d + /more detailed .*MODE/d + s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/' + fi + exit $? +fi + + +# func_mode_execute arg... +func_mode_execute () +{ + $opt_debug + # The first argument is the command name. + cmd="$nonopt" + test -z "$cmd" && \ + func_fatal_help "you must specify a COMMAND" + + # Handle -dlopen flags immediately. + for file in $opt_dlopen; do + test -f "$file" \ + || func_fatal_help "\`$file' is not a file" + + dir= + case $file in + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$lib' is not a valid libtool archive" + + # Read the libtool library. + dlname= + library_names= + func_source "$file" + + # Skip this library if it cannot be dlopened. + if test -z "$dlname"; then + # Warn if it was a shared library. + test -n "$library_names" && \ + func_warning "\`$file' was not linked with \`-export-dynamic'" + continue + fi + + func_dirname "$file" "" "." + dir="$func_dirname_result" + + if test -f "$dir/$objdir/$dlname"; then + func_append dir "/$objdir" else - error=$? - $run $rm $removelist - exit $error + if test ! -f "$dir/$dlname"; then + func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" + fi fi + ;; + + *.lo) + # Just add the directory containing the .lo file. + func_dirname "$file" "" "." + dir="$func_dirname_result" + ;; + + *) + func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" + continue + ;; + esac + + # Get the absolute pathname. + absdir=`cd "$dir" && pwd` + test -n "$absdir" && dir="$absdir" + + # Now add the directory to shlibpath_var. + if eval "test -z \"\$$shlibpath_var\""; then + eval "$shlibpath_var=\"\$dir\"" + else + eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi + done - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <<EOF -# Name of the non-PIC object. -non_pic_object='$objname' + # This variable tells wrapper scripts just to set shlibpath_var + # rather than running their programs. + libtool_execute_magic="$magic" -EOF - else - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <<EOF -# Name of the non-PIC object. -non_pic_object=none + # Check if any of the arguments is a wrapper script. + args= + for file + do + case $file in + -* | *.la | *.lo ) ;; + *) + # Do a test to see if this is really a libtool program. + if func_ltwrapper_script_p "$file"; then + func_source "$file" + # Transform arg to wrapped name. + file="$progdir/$program" + elif func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + func_source "$func_ltwrapper_scriptname_result" + # Transform arg to wrapped name. + file="$progdir/$program" + fi + ;; + esac + # Quote arguments (to preserve shell metacharacters). + func_append_quoted args "$file" + done -EOF + if test "X$opt_dry_run" = Xfalse; then + if test -n "$shlibpath_var"; then + # Export the shlibpath_var. + eval "export $shlibpath_var" + fi + + # Restore saved environment variables + for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES + do + eval "if test \"\${save_$lt_var+set}\" = set; then + $lt_var=\$save_$lt_var; export $lt_var + else + $lt_unset $lt_var + fi" + done + + # Now prepare to actually exec the command. + exec_cmd="\$cmd$args" + else + # Display what would be done. + if test -n "$shlibpath_var"; then + eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" + echo "export $shlibpath_var" + fi + $ECHO "$cmd$args" + exit $EXIT_SUCCESS fi +} - $run $mv "${libobj}T" "${libobj}" +test "$opt_mode" = execute && func_mode_execute ${1+"$@"} - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - $run $rm "$lockfile" + +# func_mode_finish arg... +func_mode_finish () +{ + $opt_debug + libs= + libdirs= + admincmds= + + for opt in "$nonopt" ${1+"$@"} + do + if test -d "$opt"; then + func_append libdirs " $opt" + + elif test -f "$opt"; then + if func_lalib_unsafe_p "$opt"; then + func_append libs " $opt" + else + func_warning "\`$opt' is not a valid libtool archive" + fi + + else + func_fatal_error "invalid argument \`$opt'" + fi + done + + if test -n "$libs"; then + if test -n "$lt_sysroot"; then + sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"` + sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;" + else + sysroot_cmd= + fi + + # Remove sysroot references + if $opt_dry_run; then + for lib in $libs; do + echo "removing references to $lt_sysroot and \`=' prefixes from $lib" + done + else + tmpdir=`func_mktempdir` + for lib in $libs; do + sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \ + > $tmpdir/tmp-la + mv -f $tmpdir/tmp-la $lib + done + ${RM}r "$tmpdir" + fi + fi + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. + func_execute_cmds "$finish_cmds" 'admincmds="$admincmds +'"$cmd"'"' + fi + if test -n "$finish_eval"; then + # Do the single finish_eval. + eval cmds=\"$finish_eval\" + $opt_dry_run || eval "$cmds" || func_append admincmds " + $cmds" + fi + done fi + # Exit here if they wanted silent mode. + $opt_silent && exit $EXIT_SUCCESS + + if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then + echo "----------------------------------------------------------------------" + echo "Libraries have been installed in:" + for libdir in $libdirs; do + $ECHO " $libdir" + done + echo + echo "If you ever happen to want to link against installed libraries" + echo "in a given directory, LIBDIR, you must either use libtool, and" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" + echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then + echo " - add LIBDIR to the \`$shlibpath_var' environment variable" + echo " during execution" + fi + if test -n "$runpath_var"; then + echo " - add LIBDIR to the \`$runpath_var' environment variable" + echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + + $ECHO " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then + $ECHO " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then + echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi + echo + + echo "See any operating system documentation about shared libraries for" + case $host in + solaris2.[6789]|solaris2.1[0-9]) + echo "more information, such as the ld(1), crle(1) and ld.so(8) manual" + echo "pages." + ;; + *) + echo "more information, such as the ld(1) and ld.so(8) manual pages." + ;; + esac + echo "----------------------------------------------------------------------" + fi exit $EXIT_SUCCESS +} + +test "$opt_mode" = finish && func_mode_finish ${1+"$@"} + + +# func_mode_install arg... +func_mode_install () +{ + $opt_debug + # There may be an optional sh(1) argument at the beginning of + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + case $nonopt in *shtool*) :;; *) false;; esac; then + # Aesthetically quote it. + func_quote_for_eval "$nonopt" + install_prog="$func_quote_for_eval_result " + arg=$1 + shift + else + install_prog= + arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + func_quote_for_eval "$arg" + func_append install_prog "$func_quote_for_eval_result" + install_shared_prog=$install_prog + case " $install_prog " in + *[\\\ /]cp\ *) install_cp=: ;; + *) install_cp=false ;; + esac + + # We need to accept at least all the BSD install flags. + dest= + files= + opts= + prev= + install_type= + isdir=no + stripme= + no_mode=: + for arg + do + arg2= + if test -n "$dest"; then + func_append files " $dest" + dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; + -f) + if $install_cp; then :; else + prev=$arg + fi + ;; + -g | -m | -o) + prev=$arg + ;; + -s) + stripme=" -s" + continue + ;; + -*) + ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + if test "x$prev" = x-m && test -n "$install_override_mode"; then + arg2=$install_override_mode + no_mode=false + fi + prev= + else + dest=$arg + continue + fi + ;; + esac + + # Aesthetically quote the argument. + func_quote_for_eval "$arg" + func_append install_prog " $func_quote_for_eval_result" + if test -n "$arg2"; then + func_quote_for_eval "$arg2" + fi + func_append install_shared_prog " $func_quote_for_eval_result" + done + + test -z "$install_prog" && \ + func_fatal_help "you must specify an install program" + + test -n "$prev" && \ + func_fatal_help "the \`$prev' option requires an argument" + + if test -n "$install_override_mode" && $no_mode; then + if $install_cp; then :; else + func_quote_for_eval "$install_override_mode" + func_append install_shared_prog " -m $func_quote_for_eval_result" + fi + fi + + if test -z "$files"; then + if test -z "$dest"; then + func_fatal_help "no file or destination specified" + else + func_fatal_help "you must specify a destination" + fi + fi + + # Strip any trailing slash from the destination. + func_stripname '' '/' "$dest" + dest=$func_stripname_result + + # Check to see that the destination is a directory. + test -d "$dest" && isdir=yes + if test "$isdir" = yes; then + destdir="$dest" + destname= + else + func_dirname_and_basename "$dest" "" "." + destdir="$func_dirname_result" + destname="$func_basename_result" + + # Not a directory, so check to see that there is only one file specified. + set dummy $files; shift + test "$#" -gt 1 && \ + func_fatal_help "\`$dest' is not a directory" + fi + case $destdir in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + for file in $files; do + case $file in + *.lo) ;; + *) + func_fatal_help "\`$destdir' must be an absolute directory name" + ;; + esac + done + ;; + esac + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" + + staticlibs= + future_libdirs= + current_libdirs= + for file in $files; do + + # Do each installation. + case $file in + *.$libext) + # Do the static libraries later. + func_append staticlibs " $file" + ;; + + *.la) + func_resolve_sysroot "$file" + file=$func_resolve_sysroot_result + + # Check to see that this really is a libtool archive. + func_lalib_unsafe_p "$file" \ + || func_fatal_help "\`$file' is not a valid libtool archive" + + library_names= + old_library= + relink_command= + func_source "$file" + + # Add the libdir to current_libdirs if it is the destination. + if test "X$destdir" = "X$libdir"; then + case "$current_libdirs " in + *" $libdir "*) ;; + *) func_append current_libdirs " $libdir" ;; + esac + else + # Note the libdir as a future libdir. + case "$future_libdirs " in + *" $libdir "*) ;; + *) func_append future_libdirs " $libdir" ;; + esac + fi + + func_dirname "$file" "/" "" + dir="$func_dirname_result" + func_append dir "$objdir" + + if test -n "$relink_command"; then + # Determine the prefix the user has applied to our future dir. + inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"` + + # Don't allow the user to place us outside of our expected + # location b/c this prevents finding dependent libraries that + # are installed to the same prefix. + # At present, this check doesn't affect windows .dll's that + # are installed into $libdir/../bin (currently, that works fine) + # but it's something to keep an eye on. + test "$inst_prefix_dir" = "$destdir" && \ + func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" + + if test -n "$inst_prefix_dir"; then + # Stick the inst_prefix_dir data into the link command. + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` + else + relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"` + fi + + func_warning "relinking \`$file'" + func_show_eval "$relink_command" \ + 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' + fi + + # See the names of the shared library. + set dummy $library_names; shift + if test -n "$1"; then + realname="$1" + shift + + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + + # Install the shared library and build the symlinks. + func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \ + 'exit $?' + tstripme="$stripme" + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + case $realname in + *.dll.a) + tstripme="" + ;; + esac + ;; + esac + if test -n "$tstripme" && test -n "$striplib"; then + func_show_eval "$striplib $destdir/$realname" 'exit $?' + fi + + if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. + # Try `ln -sf' first, because the `ln' binary might depend on + # the symlink we replace! Solaris /bin/ln does not understand -f, + # so we also need to try rm && ln -s. + for linkname + do + test "$linkname" != "$realname" \ + && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" + func_execute_cmds "$postinstall_cmds" 'exit $?' + fi + + # Install the pseudo-library for information purposes. + func_basename "$file" + name="$func_basename_result" + instname="$dir/$name"i + func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' + + # Maybe install the static library, too. + test -n "$old_library" && func_append staticlibs " $dir/$old_library" + ;; + + *.lo) + # Install (i.e. copy) a libtool object. + + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # Deduce the name of the destination old-style object file. + case $destfile in + *.lo) + func_lo2o "$destfile" + staticdest=$func_lo2o_result + ;; + *.$objext) + staticdest="$destfile" + destfile= + ;; + *) + func_fatal_help "cannot copy a libtool object to \`$destfile'" + ;; + esac + + # Install the libtool object if requested. + test -n "$destfile" && \ + func_show_eval "$install_prog $file $destfile" 'exit $?' + + # Install the old object if enabled. + if test "$build_old_libs" = yes; then + # Deduce the name of the old-style object file. + func_lo2o "$file" + staticobj=$func_lo2o_result + func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' + fi + exit $EXIT_SUCCESS + ;; + + *) + # Figure out destination file name, if it wasn't already specified. + if test -n "$destname"; then + destfile="$destdir/$destname" + else + func_basename "$file" + destfile="$func_basename_result" + destfile="$destdir/$destfile" + fi + + # If the file is missing, and there is a .exe on the end, strip it + # because it is most likely a libtool script we actually want to + # install + stripped_ext="" + case $file in + *.exe) + if test ! -f "$file"; then + func_stripname '' '.exe' "$file" + file=$func_stripname_result + stripped_ext=".exe" + fi + ;; + esac + + # Do a test to see if this is really a libtool program. + case $host in + *cygwin* | *mingw*) + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + wrapper=$func_ltwrapper_scriptname_result + else + func_stripname '' '.exe' "$file" + wrapper=$func_stripname_result + fi + ;; + *) + wrapper=$file + ;; + esac + if func_ltwrapper_script_p "$wrapper"; then + notinst_deplibs= + relink_command= + + func_source "$wrapper" + + # Check the variables that should have been set. + test -z "$generated_by_libtool_version" && \ + func_fatal_error "invalid libtool wrapper script \`$wrapper'" + + finalize=yes + for lib in $notinst_deplibs; do + # Check to see that each library is installed. + libdir= + if test -f "$lib"; then + func_source "$lib" + fi + libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test + if test -n "$libdir" && test ! -f "$libfile"; then + func_warning "\`$lib' has not been installed in \`$libdir'" + finalize=no + fi + done + + relink_command= + func_source "$wrapper" + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + $opt_dry_run || { + if test "$finalize" = yes; then + tmpdir=`func_mktempdir` + func_basename "$file$stripped_ext" + file="$func_basename_result" + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` + + $opt_silent || { + func_quote_for_expand "$relink_command" + eval "func_echo $func_quote_for_expand_result" + } + if eval "$relink_command"; then : + else + func_error "error: relink \`$file' with the above command before installing it" + $opt_dry_run || ${RM}r "$tmpdir" + continue + fi + file="$outputname" + else + func_warning "cannot relink \`$file'" + fi + } + else + # Install the binary that we compiled earlier. + file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another + # one anyway + case $install_prog,$host in + */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + func_stripname '' '.exe' "$destfile" + destfile=$func_stripname_result + ;; + esac + ;; + esac + func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' + $opt_dry_run || if test -n "$outputname"; then + ${RM}r "$tmpdir" + fi + ;; + esac + done + + for file in $staticlibs; do + func_basename "$file" + name="$func_basename_result" + + # Set up the ranlib parameters. + oldlib="$destdir/$name" + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result + + func_show_eval "$install_prog \$file \$oldlib" 'exit $?' + + if test -n "$stripme" && test -n "$old_striplib"; then + func_show_eval "$old_striplib $tool_oldlib" 'exit $?' + fi + + # Do each command in the postinstall commands. + func_execute_cmds "$old_postinstall_cmds" 'exit $?' + done + + test -n "$future_libdirs" && \ + func_warning "remember to run \`$progname --finish$future_libdirs'" + + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + $opt_dry_run && current_libdirs=" -n$current_libdirs" + exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else + exit $EXIT_SUCCESS + fi +} + +test "$opt_mode" = install && func_mode_install ${1+"$@"} + + +# func_generate_dlsyms outputname originator pic_p +# Extract symbols from dlprefiles and create ${outputname}S.o with +# a dlpreopen symbol table. +func_generate_dlsyms () +{ + $opt_debug + my_outputname="$1" + my_originator="$2" + my_pic_p="${3-no}" + my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` + my_dlsyms= + + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + if test -n "$NM" && test -n "$global_symbol_pipe"; then + my_dlsyms="${my_outputname}S.c" + else + func_error "not configured to extract global symbols from dlpreopened files" + fi + fi + + if test -n "$my_dlsyms"; then + case $my_dlsyms in + "") ;; + *.c) + # Discover the nlist of each of the dlfiles. + nlist="$output_objdir/${my_outputname}.nm" + + func_show_eval "$RM $nlist ${nlist}S ${nlist}T" + + # Parse the name list into a source file. + func_verbose "creating $output_objdir/$my_dlsyms" + + $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ +/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ +/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ + +#ifdef __cplusplus +extern \"C\" { +#endif + +#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4)) +#pragma GCC diagnostic ignored \"-Wstrict-prototypes\" +#endif + +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +/* External symbol declarations for the compiler. */\ +" + + if test "$dlself" = yes; then + func_verbose "generating symbol list for \`$output'" + + $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" + + # Add our own program objects to the symbol list. + progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP` + for progfile in $progfiles; do + func_to_tool_file "$progfile" func_convert_file_msys_to_w32 + func_verbose "extracting global C symbols from \`$func_to_tool_file_result'" + $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'" + done + + if test -n "$exclude_expsyms"; then + $opt_dry_run || { + eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + if test -n "$export_symbols_regex"; then + $opt_dry_run || { + eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + } + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then + export_symbols="$output_objdir/$outputname.exp" + $opt_dry_run || { + $RM $export_symbols + eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' + ;; + esac + } + else + $opt_dry_run || { + eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' + eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + eval '$MV "$nlist"T "$nlist"' + case $host in + *cygwin* | *mingw* | *cegcc* ) + eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' + eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' + ;; + esac + } + fi + fi + + for dlprefile in $dlprefiles; do + func_verbose "extracting global C symbols from \`$dlprefile'" + func_basename "$dlprefile" + name="$func_basename_result" + case $host in + *cygwin* | *mingw* | *cegcc* ) + # if an import library, we need to obtain dlname + if func_win32_import_lib_p "$dlprefile"; then + func_tr_sh "$dlprefile" + eval "curr_lafile=\$libfile_$func_tr_sh_result" + dlprefile_dlbasename="" + if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then + # Use subshell, to avoid clobbering current variable values + dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"` + if test -n "$dlprefile_dlname" ; then + func_basename "$dlprefile_dlname" + dlprefile_dlbasename="$func_basename_result" + else + # no lafile. user explicitly requested -dlpreopen <import library>. + $sharedlib_from_linklib_cmd "$dlprefile" + dlprefile_dlbasename=$sharedlib_from_linklib_result + fi + fi + $opt_dry_run || { + if test -n "$dlprefile_dlbasename" ; then + eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"' + else + func_warning "Could not compute DLL name from $name" + eval '$ECHO ": $name " >> "$nlist"' + fi + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe | + $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'" + } + else # not an import lib + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + fi + ;; + *) + $opt_dry_run || { + eval '$ECHO ": $name " >> "$nlist"' + func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32 + eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'" + } + ;; + esac + done + + $opt_dry_run || { + # Make sure we have at least an empty file. + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then + $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $MV "$nlist"T "$nlist" + fi + + # Try sorting and uniquifying the output. + if $GREP -v "^: " < "$nlist" | + if sort -k 3 </dev/null >/dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then + : + else + $GREP -v "^: " < "$nlist" > "$nlist"S + fi + + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' + else + echo '/* NONE */' >> "$output_objdir/$my_dlsyms" + fi + + echo >> "$output_objdir/$my_dlsyms" "\ + +/* The mapping between symbol names and symbols. */ +typedef struct { + const char *name; + void *address; +} lt_dlsymlist; +extern LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[]; +LT_DLSYM_CONST lt_dlsymlist +lt_${my_prefix}_LTX_preloaded_symbols[] = +{\ + { \"$my_originator\", (void *) 0 }," + + case $need_lib_prefix in + no) + eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + *) + eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" + ;; + esac + echo >> "$output_objdir/$my_dlsyms" "\ + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt_${my_prefix}_LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif\ +" + } # !$opt_dry_run + + pic_flag_for_symtable= + case "$compile_command " in + *" -static "*) ;; + *) + case $host in + # compiling the symbol table file with pic_flag works around + # a FreeBSD bug that causes programs to crash when -lm is + # linked before any other PIC object. But we must not use + # pic_flag when linking with -static. The problem exists in + # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. + *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; + *-*-hpux*) + pic_flag_for_symtable=" $pic_flag" ;; + *) + if test "X$my_pic_p" != Xno; then + pic_flag_for_symtable=" $pic_flag" + fi + ;; + esac + ;; + esac + symtab_cflags= + for arg in $LTCFLAGS; do + case $arg in + -pie | -fpie | -fPIE) ;; + *) func_append symtab_cflags " $arg" ;; + esac + done + + # Now compile the dynamic symbol file. + func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' + + # Clean up the generated files. + func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' + + # Transform the symbol file into the correct name. + symfileobj="$output_objdir/${my_outputname}S.$objext" + case $host in + *cygwin* | *mingw* | *cegcc* ) + if test -f "$output_objdir/$my_outputname.def"; then + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` + else + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + fi + ;; + *) + compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"` + ;; + esac + ;; + *-*-freebsd*) + # FreeBSD doesn't need this... + ;; + *) + func_fatal_error "unknown suffix for \`$my_dlsyms'" + ;; + esac + else + # We keep going just in case the user didn't refer to + # lt_preloaded_symbols. The linker will fail if global_symbol_pipe + # really was required. + + # Nullify the symbol file. + compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"` + finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"` + fi +} + +# func_win32_libid arg +# return the library type of file 'arg' +# +# Need a lot of goo to handle *both* DLLs and import libs +# Has to be a shell function in order to 'eat' the argument +# that is supplied when $file_magic_command is called. +# Despite the name, also deal with 64 bit binaries. +func_win32_libid () +{ + $opt_debug + win32_libid_type="unknown" + win32_fileres=`file -L $1 2>/dev/null` + case $win32_fileres in + *ar\ archive\ import\ library*) # definitely import + win32_libid_type="x86 archive import" ;; + *ar\ archive*) # could be an import, or static + # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD. + if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | + $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then + func_to_tool_file "$1" func_convert_file_msys_to_w32 + win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" | + $SED -n -e ' + 1,100{ + / I /{ + s,.*,import, + p + q + } + }'` + case $win32_nmres in + import*) win32_libid_type="x86 archive import";; + *) win32_libid_type="x86 archive static";; + esac + fi + ;; + *DLL*) + win32_libid_type="x86 DLL" + ;; + *executable*) # but shell scripts are "executable" too... + case $win32_fileres in + *MS\ Windows\ PE\ Intel*) + win32_libid_type="x86 DLL" + ;; + esac + ;; + esac + $ECHO "$win32_libid_type" +} - # libtool link mode - link | relink) - modename="$modename: link" +# func_cygming_dll_for_implib ARG +# +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib () +{ + $opt_debug + sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"` +} + +# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs +# +# The is the core of a fallback implementation of a +# platform-specific function to extract the name of the +# DLL associated with the specified import library LIBNAME. +# +# SECTION_NAME is either .idata$6 or .idata$7, depending +# on the platform and compiler that created the implib. +# +# Echos the name of the DLL associated with the +# specified import library. +func_cygming_dll_for_implib_fallback_core () +{ + $opt_debug + match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"` + $OBJDUMP -s --section "$1" "$2" 2>/dev/null | + $SED '/^Contents of section '"$match_literal"':/{ + # Place marker at beginning of archive member dllname section + s/.*/====MARK====/ + p + d + } + # These lines can sometimes be longer than 43 characters, but + # are always uninteresting + /:[ ]*file format pe[i]\{,1\}-/d + /^In archive [^:]*:/d + # Ensure marker is printed + /^====MARK====/p + # Remove all lines with less than 43 characters + /^.\{43\}/!d + # From remaining lines, remove first 43 characters + s/^.\{43\}//' | + $SED -n ' + # Join marker and all lines until next marker into a single line + /^====MARK====/ b para + H + $ b para + b + :para + x + s/\n//g + # Remove the marker + s/^====MARK====// + # Remove trailing dots and whitespace + s/[\. \t]*$// + # Print + /./p' | + # we now have a list, one entry per line, of the stringified + # contents of the appropriate section of all members of the + # archive which possess that section. Heuristic: eliminate + # all those which have a first or second character that is + # a '.' (that is, objdump's representation of an unprintable + # character.) This should work for all archives with less than + # 0x302f exports -- but will fail for DLLs whose name actually + # begins with a literal '.' or a single character followed by + # a '.'. + # + # Of those that remain, print the first one. + $SED -e '/^\./d;/^.\./d;q' +} + +# func_cygming_gnu_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is a GNU/binutils-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_gnu_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'` + test -n "$func_cygming_gnu_implib_tmp" +} + +# func_cygming_ms_implib_p ARG +# This predicate returns with zero status (TRUE) if +# ARG is an MS-style import library. Returns +# with nonzero status (FALSE) otherwise. +func_cygming_ms_implib_p () +{ + $opt_debug + func_to_tool_file "$1" func_convert_file_msys_to_w32 + func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'` + test -n "$func_cygming_ms_implib_tmp" +} + +# func_cygming_dll_for_implib_fallback ARG +# Platform-specific function to extract the +# name of the DLL associated with the specified +# import library ARG. +# +# This fallback implementation is for use when $DLLTOOL +# does not support the --identify-strict option. +# Invoked by eval'ing the libtool variable +# $sharedlib_from_linklib_cmd +# Result is available in the variable +# $sharedlib_from_linklib_result +func_cygming_dll_for_implib_fallback () +{ + $opt_debug + if func_cygming_gnu_implib_p "$1" ; then + # binutils import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"` + elif func_cygming_ms_implib_p "$1" ; then + # ms-generated import library + sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"` + else + # unknown + sharedlib_from_linklib_result="" + fi +} + + +# func_extract_an_archive dir oldlib +func_extract_an_archive () +{ + $opt_debug + f_ex_an_ar_dir="$1"; shift + f_ex_an_ar_oldlib="$1" + if test "$lock_old_archive_extraction" = yes; then + lockfile=$f_ex_an_ar_oldlib.lock + until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do + func_echo "Waiting for $lockfile to be removed" + sleep 2 + done + fi + func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \ + 'stat=$?; rm -f "$lockfile"; exit $stat' + if test "$lock_old_archive_extraction" = yes; then + $opt_dry_run || rm -f "$lockfile" + fi + if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then + : + else + func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" + fi +} + + +# func_extract_archives gentop oldlib ... +func_extract_archives () +{ + $opt_debug + my_gentop="$1"; shift + my_oldlibs=${1+"$@"} + my_oldobjs="" + my_xlib="" + my_xabs="" + my_xdir="" + + for my_xlib in $my_oldlibs; do + # Extract the objects. + case $my_xlib in + [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; + *) my_xabs=`pwd`"/$my_xlib" ;; + esac + func_basename "$my_xlib" + my_xlib="$func_basename_result" + my_xlib_u=$my_xlib + while :; do + case " $extracted_archives " in + *" $my_xlib_u "*) + func_arith $extracted_serial + 1 + extracted_serial=$func_arith_result + my_xlib_u=lt$extracted_serial-$my_xlib ;; + *) break ;; + esac + done + extracted_archives="$extracted_archives $my_xlib_u" + my_xdir="$my_gentop/$my_xlib_u" + + func_mkdir_p "$my_xdir" + + case $host in + *-darwin*) + func_verbose "Extracting $my_xabs" + # Do not bother doing anything if just a dry run + $opt_dry_run || { + darwin_orig_dir=`pwd` + cd $my_xdir || exit $? + darwin_archive=$my_xabs + darwin_curdir=`pwd` + darwin_base_archive=`basename "$darwin_archive"` + darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` + if test -n "$darwin_arches"; then + darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` + darwin_arch= + func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" + for darwin_arch in $darwin_arches ; do + func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" + $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" + cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" + func_extract_an_archive "`pwd`" "${darwin_base_archive}" + cd "$darwin_curdir" + $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" + done # $darwin_arches + ## Okay now we've a bunch of thin objects, gotta fatten them up :) + darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` + darwin_file= + darwin_files= + for darwin_file in $darwin_filelist; do + darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP` + $LIPO -create -output "$darwin_file" $darwin_files + done # $darwin_filelist + $RM -rf unfat-$$ + cd "$darwin_orig_dir" + else + cd $darwin_orig_dir + func_extract_an_archive "$my_xdir" "$my_xabs" + fi # $darwin_arches + } # !$opt_dry_run + ;; + *) + func_extract_an_archive "$my_xdir" "$my_xabs" + ;; + esac + my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP` + done + + func_extract_archives_result="$my_oldobjs" +} + + +# func_emit_wrapper [arg=no] +# +# Emit a libtool wrapper script on stdout. +# Don't directly open a file because we may want to +# incorporate the script contents within a cygwin/mingw +# wrapper executable. Must ONLY be called from within +# func_mode_link because it depends on a number of variables +# set therein. +# +# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR +# variable will take. If 'yes', then the emitted script +# will assume that the directory in which it is stored is +# the $objdir directory. This is a cygwin/mingw-specific +# behavior. +func_emit_wrapper () +{ + func_emit_wrapper_arg1=${1-no} + + $ECHO "\ +#! $SHELL + +# $output - temporary wrapper script for $objdir/$outputname +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION +# +# The $output program cannot be directly executed until all the libtool +# libraries that it depends on are installed. +# +# This wrapper script should never be moved out of the build directory. +# If it is, it will not operate correctly. + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='$sed_quote_subst' + +# Be Bourne compatible +if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +relink_command=\"$relink_command\" + +# This environment variable determines our operation mode. +if test \"\$libtool_install_magic\" = \"$magic\"; then + # install mode needs the following variables: + generated_by_libtool_version='$macro_version' + notinst_deplibs='$notinst_deplibs' +else + # When we are sourced in execute mode, \$file and \$ECHO are already set. + if test \"\$libtool_execute_magic\" != \"$magic\"; then + file=\"\$0\"" + + qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + $ECHO "\ + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + ECHO=\"$qECHO\" + fi + +# Very basic option parsing. These options are (a) specific to +# the libtool wrapper, (b) are identical between the wrapper +# /script/ and the wrapper /executable/ which is used only on +# windows platforms, and (c) all begin with the string "--lt-" +# (application programs are unlikely to have options which match +# this pattern). +# +# There are only two supported options: --lt-debug and +# --lt-dump-script. There is, deliberately, no --lt-help. +# +# The first argument to this parsing function should be the +# script's $0 value, followed by "$@". +lt_option_debug= +func_parse_lt_options () +{ + lt_script_arg0=\$0 + shift + for lt_opt + do + case \"\$lt_opt\" in + --lt-debug) lt_option_debug=1 ;; + --lt-dump-script) + lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\` + test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=. + lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\` + cat \"\$lt_dump_D/\$lt_dump_F\" + exit 0 + ;; + --lt-*) + \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2 + exit 1 + ;; + esac + done + + # Print the debug banner immediately: + if test -n \"\$lt_option_debug\"; then + echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2 + fi +} + +# Used when --lt-debug. Prints its arguments to stdout +# (redirection is the responsibility of the caller) +func_lt_dump_args () +{ + lt_dump_args_N=1; + for lt_arg + do + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\" + lt_dump_args_N=\`expr \$lt_dump_args_N + 1\` + done +} + +# Core function for launching the target application +func_exec_program_core () +{ +" + case $host in + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2* | *-cegcc*) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} +" + ;; + + *) + $ECHO "\ + if test -n \"\$lt_option_debug\"; then + \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2 + func_lt_dump_args \${1+\"\$@\"} 1>&2 + fi + exec \"\$progdir/\$program\" \${1+\"\$@\"} +" + ;; + esac + $ECHO "\ + \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 + exit 1 +} + +# A function to encapsulate launching the target application +# Strips options in the --lt-* namespace from \$@ and +# launches target application with the remaining arguments. +func_exec_program () +{ + case \" \$* \" in + *\\ --lt-*) + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done ;; + esac + func_exec_program_core \${1+\"\$@\"} +} + + # Parse options + func_parse_lt_options \"\$0\" \${1+\"\$@\"} + + # Find the directory that this script lives in. + thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\` + test \"x\$thisdir\" = \"x\$file\" && thisdir=. + + # Follow symbolic links until we get to the real thisdir. + file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\` + while test -n \"\$file\"; do + destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\` + + # If there was a directory component, then change thisdir. + if test \"x\$destdir\" != \"x\$file\"; then + case \"\$destdir\" in + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; + *) thisdir=\"\$thisdir/\$destdir\" ;; + esac + fi + + file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\` + file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\` + done + + # Usually 'no', except on cygwin/mingw when embedded into + # the cwrapper. + WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1 + if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then + # special case for '.' + if test \"\$thisdir\" = \".\"; then + thisdir=\`pwd\` + fi + # remove .libs from thisdir + case \"\$thisdir\" in + *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;; + $objdir ) thisdir=. ;; + esac + fi + + # Try to get the absolute directory name. + absdir=\`cd \"\$thisdir\" && pwd\` + test -n \"\$absdir\" && thisdir=\"\$absdir\" +" + + if test "$fast_install" = yes; then + $ECHO "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + + if test ! -f \"\$progdir/\$program\" || + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ + test \"X\$file\" != \"X\$progdir/\$program\"; }; then + + file=\"\$\$-\$program\" + + if test ! -d \"\$progdir\"; then + $MKDIR \"\$progdir\" + else + $RM \"\$progdir/\$file\" + fi" + + $ECHO "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then + if relink_command_output=\`eval \$relink_command 2>&1\`; then : + else + $ECHO \"\$relink_command_output\" >&2 + $RM \"\$progdir/\$file\" + exit 1 + fi + fi + + $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || + { $RM \"\$progdir/\$program\"; + $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } + $RM \"\$progdir/\$file\" + fi" + else + $ECHO "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" +" + fi + + $ECHO "\ + + if test -f \"\$progdir/\$program\"; then" + + # fixup the dll searchpath if we need to. + # + # Fix the DLL searchpath if we need to. Do this before prepending + # to shlibpath, because on Windows, both are PATH and uninstalled + # libraries must come first. + if test -n "$dllsearchpath"; then + $ECHO "\ + # Add the dll search path components to the executable PATH + PATH=$dllsearchpath:\$PATH +" + fi + + # Export our shlibpath_var if we have one. + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + $ECHO "\ + # Add our own library path to $shlibpath_var + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var + # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\` + + export $shlibpath_var +" + fi + + $ECHO "\ + if test \"\$libtool_execute_magic\" != \"$magic\"; then + # Run the actual program with our arguments. + func_exec_program \${1+\"\$@\"} + fi + else + # The program doesn't exist. + \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 + \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 + exit 1 + fi +fi\ +" +} + + +# func_emit_cwrapperexe_src +# emit the source code for a wrapper executable on stdout +# Must ONLY be called from within func_mode_link because +# it depends on a number of variable set therein. +func_emit_cwrapperexe_src () +{ + cat <<EOF + +/* $cwrappersource - temporary wrapper executable for $objdir/$outputname + Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION + + The $output program cannot be directly executed until all the libtool + libraries that it depends on are installed. + + This wrapper executable should never be moved out of the build directory. + If it is, it will not operate correctly. +*/ +EOF + cat <<"EOF" +#ifdef _MSC_VER +# define _CRT_SECURE_NO_DEPRECATE 1 +#endif +#include <stdio.h> +#include <stdlib.h> +#ifdef _MSC_VER +# include <direct.h> +# include <process.h> +# include <io.h> +#else +# include <unistd.h> +# include <stdint.h> +# ifdef __CYGWIN__ +# include <io.h> +# endif +#endif +#include <malloc.h> +#include <stdarg.h> +#include <assert.h> +#include <string.h> +#include <ctype.h> +#include <errno.h> +#include <fcntl.h> +#include <sys/stat.h> + +/* declarations of non-ANSI functions */ +#if defined(__MINGW32__) +# ifdef __STRICT_ANSI__ +int _putenv (const char *); +# endif +#elif defined(__CYGWIN__) +# ifdef __STRICT_ANSI__ +char *realpath (const char *, char *); +int putenv (char *); +int setenv (const char *, const char *, int); +# endif +/* #elif defined (other platforms) ... */ +#endif + +/* portability defines, excluding path handling macros */ +#if defined(_MSC_VER) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +# define S_IXUSR _S_IEXEC +# ifndef _INTPTR_T_DEFINED +# define _INTPTR_T_DEFINED +# define intptr_t int +# endif +#elif defined(__MINGW32__) +# define setmode _setmode +# define stat _stat +# define chmod _chmod +# define getcwd _getcwd +# define putenv _putenv +#elif defined(__CYGWIN__) +# define HAVE_SETENV +# define FOPEN_WB "wb" +/* #elif defined (other platforms) ... */ +#endif + +#if defined(PATH_MAX) +# define LT_PATHMAX PATH_MAX +#elif defined(MAXPATHLEN) +# define LT_PATHMAX MAXPATHLEN +#else +# define LT_PATHMAX 1024 +#endif + +#ifndef S_IXOTH +# define S_IXOTH 0 +#endif +#ifndef S_IXGRP +# define S_IXGRP 0 +#endif + +/* path handling portability macros */ +#ifndef DIR_SEPARATOR +# define DIR_SEPARATOR '/' +# define PATH_SEPARATOR ':' +#endif + +#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ + defined (__OS2__) +# define HAVE_DOS_BASED_FILE_SYSTEM +# define FOPEN_WB "wb" +# ifndef DIR_SEPARATOR_2 +# define DIR_SEPARATOR_2 '\\' +# endif +# ifndef PATH_SEPARATOR_2 +# define PATH_SEPARATOR_2 ';' +# endif +#endif + +#ifndef DIR_SEPARATOR_2 +# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) +#else /* DIR_SEPARATOR_2 */ +# define IS_DIR_SEPARATOR(ch) \ + (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) +#endif /* DIR_SEPARATOR_2 */ + +#ifndef PATH_SEPARATOR_2 +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) +#else /* PATH_SEPARATOR_2 */ +# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) +#endif /* PATH_SEPARATOR_2 */ + +#ifndef FOPEN_WB +# define FOPEN_WB "w" +#endif +#ifndef _O_BINARY +# define _O_BINARY 0 +#endif + +#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) +#define XFREE(stale) do { \ + if (stale) { free ((void *) stale); stale = 0; } \ +} while (0) + +#if defined(LT_DEBUGWRAPPER) +static int lt_debug = 1; +#else +static int lt_debug = 0; +#endif + +const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */ + +void *xmalloc (size_t num); +char *xstrdup (const char *string); +const char *base_name (const char *name); +char *find_executable (const char *wrapper); +char *chase_symlinks (const char *pathspec); +int make_executable (const char *path); +int check_executable (const char *path); +char *strendzap (char *str, const char *pat); +void lt_debugprintf (const char *file, int line, const char *fmt, ...); +void lt_fatal (const char *file, int line, const char *message, ...); +static const char *nonnull (const char *s); +static const char *nonempty (const char *s); +void lt_setenv (const char *name, const char *value); +char *lt_extend_str (const char *orig_value, const char *add, int to_end); +void lt_update_exe_path (const char *name, const char *value); +void lt_update_lib_path (const char *name, const char *value); +char **prepare_spawn (char **argv); +void lt_dump_script (FILE *f); +EOF + + cat <<EOF +volatile const char * MAGIC_EXE = "$magic_exe"; +const char * LIB_PATH_VARNAME = "$shlibpath_var"; +EOF + + if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then + func_to_host_path "$temp_rpath" + cat <<EOF +const char * LIB_PATH_VALUE = "$func_to_host_path_result"; +EOF + else + cat <<"EOF" +const char * LIB_PATH_VALUE = ""; +EOF + fi + + if test -n "$dllsearchpath"; then + func_to_host_path "$dllsearchpath:" + cat <<EOF +const char * EXE_PATH_VARNAME = "PATH"; +const char * EXE_PATH_VALUE = "$func_to_host_path_result"; +EOF + else + cat <<"EOF" +const char * EXE_PATH_VARNAME = ""; +const char * EXE_PATH_VALUE = ""; +EOF + fi + + if test "$fast_install" = yes; then + cat <<EOF +const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */ +EOF + else + cat <<EOF +const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */ +EOF + fi + + + cat <<"EOF" + +#define LTWRAPPER_OPTION_PREFIX "--lt-" + +static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; +static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; +static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug"; + +int +main (int argc, char *argv[]) +{ + char **newargz; + int newargc; + char *tmp_pathspec; + char *actual_cwrapper_path; + char *actual_cwrapper_name; + char *target_name; + char *lt_argv_zero; + intptr_t rval = 127; + + int i; + + program_name = (char *) xstrdup (base_name (argv[0])); + newargz = XMALLOC (char *, argc + 1); + + /* very simple arg parsing; don't want to rely on getopt + * also, copy all non cwrapper options to newargz, except + * argz[0], which is handled differently + */ + newargc=0; + for (i = 1; i < argc; i++) + { + if (strcmp (argv[i], dumpscript_opt) == 0) + { +EOF + case "$host" in + *mingw* | *cygwin* ) + # make stdout use "unix" line endings + echo " setmode(1,_O_BINARY);" + ;; + esac + + cat <<"EOF" + lt_dump_script (stdout); + return 0; + } + if (strcmp (argv[i], debug_opt) == 0) + { + lt_debug = 1; + continue; + } + if (strcmp (argv[i], ltwrapper_option_prefix) == 0) + { + /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX + namespace, but it is not one of the ones we know about and + have already dealt with, above (inluding dump-script), then + report an error. Otherwise, targets might begin to believe + they are allowed to use options in the LTWRAPPER_OPTION_PREFIX + namespace. The first time any user complains about this, we'll + need to make LTWRAPPER_OPTION_PREFIX a configure-time option + or a configure.ac-settable value. + */ + lt_fatal (__FILE__, __LINE__, + "unrecognized %s option: '%s'", + ltwrapper_option_prefix, argv[i]); + } + /* otherwise ... */ + newargz[++newargc] = xstrdup (argv[i]); + } + newargz[++newargc] = NULL; + +EOF + cat <<EOF + /* The GNU banner must be the first non-error debug message */ + lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n"); +EOF + cat <<"EOF" + lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]); + lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name); + + tmp_pathspec = find_executable (argv[0]); + if (tmp_pathspec == NULL) + lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]); + lt_debugprintf (__FILE__, __LINE__, + "(main) found exe (before symlink chase) at: %s\n", + tmp_pathspec); + + actual_cwrapper_path = chase_symlinks (tmp_pathspec); + lt_debugprintf (__FILE__, __LINE__, + "(main) found exe (after symlink chase) at: %s\n", + actual_cwrapper_path); + XFREE (tmp_pathspec); + + actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path)); + strendzap (actual_cwrapper_path, actual_cwrapper_name); + + /* wrapper name transforms */ + strendzap (actual_cwrapper_name, ".exe"); + tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1); + XFREE (actual_cwrapper_name); + actual_cwrapper_name = tmp_pathspec; + tmp_pathspec = 0; + + /* target_name transforms -- use actual target program name; might have lt- prefix */ + target_name = xstrdup (base_name (TARGET_PROGRAM_NAME)); + strendzap (target_name, ".exe"); + tmp_pathspec = lt_extend_str (target_name, ".exe", 1); + XFREE (target_name); + target_name = tmp_pathspec; + tmp_pathspec = 0; + + lt_debugprintf (__FILE__, __LINE__, + "(main) libtool target name: %s\n", + target_name); +EOF + + cat <<EOF + newargz[0] = + XMALLOC (char, (strlen (actual_cwrapper_path) + + strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1)); + strcpy (newargz[0], actual_cwrapper_path); + strcat (newargz[0], "$objdir"); + strcat (newargz[0], "/"); +EOF + + cat <<"EOF" + /* stop here, and copy so we don't have to do this twice */ + tmp_pathspec = xstrdup (newargz[0]); + + /* do NOT want the lt- prefix here, so use actual_cwrapper_name */ + strcat (newargz[0], actual_cwrapper_name); + + /* DO want the lt- prefix here if it exists, so use target_name */ + lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1); + XFREE (tmp_pathspec); + tmp_pathspec = NULL; +EOF + + case $host_os in + mingw*) + cat <<"EOF" + { + char* p; + while ((p = strchr (newargz[0], '\\')) != NULL) + { + *p = '/'; + } + while ((p = strchr (lt_argv_zero, '\\')) != NULL) + { + *p = '/'; + } + } +EOF + ;; + esac + + cat <<"EOF" + XFREE (target_name); + XFREE (actual_cwrapper_path); + XFREE (actual_cwrapper_name); + + lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ + lt_setenv ("DUALCASE", "1"); /* for MSK sh */ + /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must + be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath) + because on Windows, both *_VARNAMEs are PATH but uninstalled + libraries must come first. */ + lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); + lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); + + lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n", + nonnull (lt_argv_zero)); + for (i = 0; i < newargc; i++) + { + lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n", + i, nonnull (newargz[i])); + } + +EOF + + case $host_os in + mingw*) + cat <<"EOF" + /* execv doesn't actually work on mingw as expected on unix */ + newargz = prepare_spawn (newargz); + rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); + if (rval == -1) + { + /* failed to start process */ + lt_debugprintf (__FILE__, __LINE__, + "(main) failed to launch target \"%s\": %s\n", + lt_argv_zero, nonnull (strerror (errno))); + return 127; + } + return rval; +EOF + ;; + *) + cat <<"EOF" + execv (lt_argv_zero, newargz); + return rval; /* =127, but avoids unused variable warning */ +EOF + ;; + esac + + cat <<"EOF" +} + +void * +xmalloc (size_t num) +{ + void *p = (void *) malloc (num); + if (!p) + lt_fatal (__FILE__, __LINE__, "memory exhausted"); + + return p; +} + +char * +xstrdup (const char *string) +{ + return string ? strcpy ((char *) xmalloc (strlen (string) + 1), + string) : NULL; +} + +const char * +base_name (const char *name) +{ + const char *base; + +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + /* Skip over the disk name in MSDOS pathnames. */ + if (isalpha ((unsigned char) name[0]) && name[1] == ':') + name += 2; +#endif + + for (base = name; *name; name++) + if (IS_DIR_SEPARATOR (*name)) + base = name + 1; + return base; +} + +int +check_executable (const char *path) +{ + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if ((stat (path, &st) >= 0) + && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) + return 1; + else + return 0; +} + +int +make_executable (const char *path) +{ + int rval = 0; + struct stat st; + + lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n", + nonempty (path)); + if ((!path) || (!*path)) + return 0; + + if (stat (path, &st) >= 0) + { + rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); + } + return rval; +} + +/* Searches for the full path of the wrapper. Returns + newly allocated full path name if found, NULL otherwise + Does not chase symlinks, even on platforms that support them. +*/ +char * +find_executable (const char *wrapper) +{ + int has_slash = 0; + const char *p; + const char *p_next; + /* static buffer for getcwd */ + char tmp[LT_PATHMAX + 1]; + int tmp_len; + char *concat_name; + + lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n", + nonempty (wrapper)); + + if ((wrapper == NULL) || (*wrapper == '\0')) + return NULL; + + /* Absolute path? */ +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + else + { +#endif + if (IS_DIR_SEPARATOR (wrapper[0])) + { + concat_name = xstrdup (wrapper); + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } +#if defined (HAVE_DOS_BASED_FILE_SYSTEM) + } +#endif + + for (p = wrapper; *p; p++) + if (*p == '/') + { + has_slash = 1; + break; + } + if (!has_slash) + { + /* no slashes; search PATH */ + const char *path = getenv ("PATH"); + if (path != NULL) + { + for (p = path; *p; p = p_next) + { + const char *q; + size_t p_len; + for (q = p; *q; q++) + if (IS_PATH_SEPARATOR (*q)) + break; + p_len = q - p; + p_next = (*q == '\0' ? q : q + 1); + if (p_len == 0) + { + /* empty path: current directory */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = + XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + } + else + { + concat_name = + XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, p, p_len); + concat_name[p_len] = '/'; + strcpy (concat_name + p_len + 1, wrapper); + } + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + } + } + /* not found in PATH; assume curdir */ + } + /* Relative path | not found in path: prepend cwd */ + if (getcwd (tmp, LT_PATHMAX) == NULL) + lt_fatal (__FILE__, __LINE__, "getcwd failed: %s", + nonnull (strerror (errno))); + tmp_len = strlen (tmp); + concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); + memcpy (concat_name, tmp, tmp_len); + concat_name[tmp_len] = '/'; + strcpy (concat_name + tmp_len + 1, wrapper); + + if (check_executable (concat_name)) + return concat_name; + XFREE (concat_name); + return NULL; +} + +char * +chase_symlinks (const char *pathspec) +{ +#ifndef S_ISLNK + return xstrdup (pathspec); +#else + char buf[LT_PATHMAX]; + struct stat s; + char *tmp_pathspec = xstrdup (pathspec); + char *p; + int has_symlinks = 0; + while (strlen (tmp_pathspec) && !has_symlinks) + { + lt_debugprintf (__FILE__, __LINE__, + "checking path component for symlinks: %s\n", + tmp_pathspec); + if (lstat (tmp_pathspec, &s) == 0) + { + if (S_ISLNK (s.st_mode) != 0) + { + has_symlinks = 1; + break; + } + + /* search backwards for last DIR_SEPARATOR */ + p = tmp_pathspec + strlen (tmp_pathspec) - 1; + while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + p--; + if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) + { + /* no more DIR_SEPARATORS left */ + break; + } + *p = '\0'; + } + else + { + lt_fatal (__FILE__, __LINE__, + "error accessing file \"%s\": %s", + tmp_pathspec, nonnull (strerror (errno))); + } + } + XFREE (tmp_pathspec); + + if (!has_symlinks) + { + return xstrdup (pathspec); + } + + tmp_pathspec = realpath (pathspec, buf); + if (tmp_pathspec == 0) + { + lt_fatal (__FILE__, __LINE__, + "could not follow symlinks for %s", pathspec); + } + return xstrdup (tmp_pathspec); +#endif +} + +char * +strendzap (char *str, const char *pat) +{ + size_t len, patlen; + + assert (str != NULL); + assert (pat != NULL); + + len = strlen (str); + patlen = strlen (pat); + + if (patlen <= len) + { + str += len - patlen; + if (strcmp (str, pat) == 0) + *str = '\0'; + } + return str; +} + +void +lt_debugprintf (const char *file, int line, const char *fmt, ...) +{ + va_list args; + if (lt_debug) + { + (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line); + va_start (args, fmt); + (void) vfprintf (stderr, fmt, args); + va_end (args); + } +} + +static void +lt_error_core (int exit_status, const char *file, + int line, const char *mode, + const char *message, va_list ap) +{ + fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode); + vfprintf (stderr, message, ap); + fprintf (stderr, ".\n"); + + if (exit_status >= 0) + exit (exit_status); +} + +void +lt_fatal (const char *file, int line, const char *message, ...) +{ + va_list ap; + va_start (ap, message); + lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap); + va_end (ap); +} + +static const char * +nonnull (const char *s) +{ + return s ? s : "(null)"; +} + +static const char * +nonempty (const char *s) +{ + return (s && !*s) ? "(empty)" : nonnull (s); +} + +void +lt_setenv (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_setenv) setting '%s' to '%s'\n", + nonnull (name), nonnull (value)); + { +#ifdef HAVE_SETENV + /* always make a copy, for consistency with !HAVE_SETENV */ + char *str = xstrdup (value); + setenv (name, str, 1); +#else + int len = strlen (name) + 1 + strlen (value) + 1; + char *str = XMALLOC (char, len); + sprintf (str, "%s=%s", name, value); + if (putenv (str) != EXIT_SUCCESS) + { + XFREE (str); + } +#endif + } +} + +char * +lt_extend_str (const char *orig_value, const char *add, int to_end) +{ + char *new_value; + if (orig_value && *orig_value) + { + int orig_value_len = strlen (orig_value); + int add_len = strlen (add); + new_value = XMALLOC (char, add_len + orig_value_len + 1); + if (to_end) + { + strcpy (new_value, orig_value); + strcpy (new_value + orig_value_len, add); + } + else + { + strcpy (new_value, add); + strcpy (new_value + add_len, orig_value); + } + } + else + { + new_value = xstrdup (add); + } + return new_value; +} + +void +lt_update_exe_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_exe_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + /* some systems can't cope with a ':'-terminated path #' */ + int len = strlen (new_value); + while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) + { + new_value[len-1] = '\0'; + } + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +void +lt_update_lib_path (const char *name, const char *value) +{ + lt_debugprintf (__FILE__, __LINE__, + "(lt_update_lib_path) modifying '%s' by prepending '%s'\n", + nonnull (name), nonnull (value)); + + if (name && *name && value && *value) + { + char *new_value = lt_extend_str (getenv (name), value, 0); + lt_setenv (name, new_value); + XFREE (new_value); + } +} + +EOF + case $host_os in + mingw*) + cat <<"EOF" + +/* Prepares an argument vector before calling spawn(). + Note that spawn() does not by itself call the command interpreter + (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") : + ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); + GetVersionEx(&v); + v.dwPlatformId == VER_PLATFORM_WIN32_NT; + }) ? "cmd.exe" : "command.com"). + Instead it simply concatenates the arguments, separated by ' ', and calls + CreateProcess(). We must quote the arguments since Win32 CreateProcess() + interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a + special way: + - Space and tab are interpreted as delimiters. They are not treated as + delimiters if they are surrounded by double quotes: "...". + - Unescaped double quotes are removed from the input. Their only effect is + that within double quotes, space and tab are treated like normal + characters. + - Backslashes not followed by double quotes are not special. + - But 2*n+1 backslashes followed by a double quote become + n backslashes followed by a double quote (n >= 0): + \" -> " + \\\" -> \" + \\\\\" -> \\" + */ +#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037" +char ** +prepare_spawn (char **argv) +{ + size_t argc; + char **new_argv; + size_t i; + + /* Count number of arguments. */ + for (argc = 0; argv[argc] != NULL; argc++) + ; + + /* Allocate new argument vector. */ + new_argv = XMALLOC (char *, argc + 1); + + /* Put quoted arguments into the new argument vector. */ + for (i = 0; i < argc; i++) + { + const char *string = argv[i]; + + if (string[0] == '\0') + new_argv[i] = xstrdup ("\"\""); + else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL) + { + int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL); + size_t length; + unsigned int backslashes; + const char *s; + char *quoted_string; + char *p; + + length = 0; + backslashes = 0; + if (quote_around) + length++; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + length += backslashes + 1; + length++; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + length += backslashes + 1; + + quoted_string = XMALLOC (char, length + 1); + + p = quoted_string; + backslashes = 0; + if (quote_around) + *p++ = '"'; + for (s = string; *s != '\0'; s++) + { + char c = *s; + if (c == '"') + { + unsigned int j; + for (j = backslashes + 1; j > 0; j--) + *p++ = '\\'; + } + *p++ = c; + if (c == '\\') + backslashes++; + else + backslashes = 0; + } + if (quote_around) + { + unsigned int j; + for (j = backslashes; j > 0; j--) + *p++ = '\\'; + *p++ = '"'; + } + *p = '\0'; + + new_argv[i] = quoted_string; + } + else + new_argv[i] = (char *) string; + } + new_argv[argc] = NULL; + + return new_argv; +} +EOF + ;; + esac + + cat <<"EOF" +void lt_dump_script (FILE* f) +{ +EOF + func_emit_wrapper yes | + $SED -n -e ' +s/^\(.\{79\}\)\(..*\)/\1\ +\2/ +h +s/\([\\"]\)/\\\1/g +s/$/\\n/ +s/\([^\n]*\).*/ fputs ("\1", f);/p +g +D' + cat <<"EOF" +} +EOF +} +# end: func_emit_cwrapperexe_src + +# func_win32_import_lib_p ARG +# True if ARG is an import lib, as indicated by $file_magic_cmd +func_win32_import_lib_p () +{ + $opt_debug + case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in + *import*) : ;; + *) false ;; + esac +} + +# func_mode_link arg... +func_mode_link () +{ + $opt_debug case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra @@ -1150,10 +5145,10 @@ EOF allow_undefined=yes ;; esac - libtool_args="$nonopt" + libtool_args=$nonopt base_compile="$nonopt $@" - compile_command="$nonopt" - finalize_command="$nonopt" + compile_command=$nonopt + finalize_command=$nonopt compile_rpath= finalize_rpath= @@ -1168,8 +5163,10 @@ EOF dllsearchpath= lib_search_path=`pwd` inst_prefix_dir= + new_inherited_linker_flags= avoid_version=no + bindir= dlfiles= dlprefiles= dlself=no @@ -1183,7 +5180,6 @@ EOF no_install=no objs= non_pic_objects= - notinst_path= # paths that contain not-installed libtool libraries precious_files_regex= prefer_static_libs=no preload=no @@ -1197,19 +5193,25 @@ EOF thread_safe=no vinfo= vinfo_number=no + weak_libs= single_module="${wl}-single_module" - func_infer_tag $base_compile # We need to know -static, to get the right output filenames. for arg do case $arg in + -shared) + test "$build_libtool_libs" != yes && \ + func_fatal_configuration "can not build a shared library" + build_old_libs=no + break + ;; -all-static | -static | -static-libtool-libs) case $arg in -all-static) if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 + func_warning "complete static linking is impossible in this configuration" fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static @@ -1243,29 +5245,30 @@ EOF while test "$#" -gt 0; do arg="$1" shift - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test - ;; - *) qarg=$arg ;; - esac - libtool_args="$libtool_args $qarg" + func_quote_for_eval "$arg" + qarg=$func_quote_for_eval_unquoted_result + func_append libtool_args " $func_quote_for_eval_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" + func_append compile_command " @OUTPUT@" + func_append finalize_command " @OUTPUT@" ;; esac case $prev in + bindir) + bindir="$arg" + prev= + continue + ;; dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" + func_append compile_command " @SYMFILE@" + func_append finalize_command " @SYMFILE@" preload=yes fi case $arg in @@ -1292,9 +5295,9 @@ EOF ;; *) if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" + func_append dlfiles " $arg" else - dlprefiles="$dlprefiles $arg" + func_append dlprefiles " $arg" fi prev= continue @@ -1303,10 +5306,8 @@ EOF ;; expsyms) export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit $EXIT_FAILURE - fi + test -f "$arg" \ + || func_fatal_error "symbol file \`$arg' does not exist" prev= continue ;; @@ -1315,18 +5316,21 @@ EOF prev= continue ;; - inst_prefix) - inst_prefix_dir="$arg" - prev= - continue - ;; - precious_regex) - precious_files_regex="$arg" + framework) + case $host in + *-*-darwin*) + case "$deplibs " in + *" $qarg.ltframework "*) ;; + *) func_append deplibs " $qarg.ltframework" # this is fixed later + ;; + esac + ;; + esac prev= continue ;; - release) - release="-$arg" + inst_prefix) + inst_prefix_dir="$arg" prev= continue ;; @@ -1334,39 +5338,30 @@ EOF if test -f "$arg"; then save_arg=$arg moreargs= - for fil in `cat $save_arg` + for fil in `cat "$save_arg"` do -# moreargs="$moreargs $fil" +# func_append moreargs " $fil" arg=$fil # A libtool-controlled object. # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac + func_source "$arg" - if test -z "$pic_object" || \ + if test -z "$pic_object" || test -z "$non_pic_object" || - test "$pic_object" = none && \ + test "$pic_object" = none && test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. @@ -1374,7 +5369,7 @@ EOF if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" + func_append dlfiles " $pic_object" prev= continue else @@ -1386,12 +5381,12 @@ EOF # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" + func_append dlprefiles " $pic_object" prev= fi # A PIC object. - libobjs="$libobjs $pic_object" + func_append libobjs " $pic_object" arg="$pic_object" fi @@ -1401,7 +5396,7 @@ EOF non_pic_object="$xdir$non_pic_object" # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" + func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi @@ -1409,95 +5404,95 @@ EOF # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" + func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. - + if $opt_dry_run; then # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" fi fi done else - $echo "$modename: link input file \`$save_arg' does not exist" - exit $EXIT_FAILURE + func_fatal_error "link input file \`$arg' does not exist" fi arg=$save_arg prev= continue ;; + precious_regex) + precious_files_regex="$arg" + prev= + continue + ;; + release) + release="-$arg" + prev= + continue + ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "only absolute run-paths are allowed" ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; - *) rpath="$rpath $arg" ;; + *) func_append rpath " $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; + *) func_append xrpath " $arg" ;; esac fi prev= continue ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" + shrext) + shrext_cmds="$arg" prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" continue ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" + weak) + func_append weak_libs " $arg" prev= - compile_command="$compile_command $wl$qarg" - finalize_command="$finalize_command $wl$qarg" continue ;; xcclinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $qarg" + func_append linker_flags " $qarg" + func_append compiler_flags " $qarg" prev= - compile_command="$compile_command $qarg" - finalize_command="$finalize_command $qarg" + func_append compile_command " $qarg" + func_append finalize_command " $qarg" continue ;; - shrext) - shrext_cmds="$arg" + xcompiler) + func_append compiler_flags " $qarg" prev= + func_append compile_command " $qarg" + func_append finalize_command " $qarg" continue ;; - darwin_framework|darwin_framework_skip) - test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + xlinker) + func_append linker_flags " $qarg" + func_append compiler_flags " $wl$qarg" prev= + func_append compile_command " $wl$qarg" + func_append finalize_command " $wl$qarg" continue ;; *) @@ -1513,16 +5508,16 @@ EOF case $arg in -all-static) if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" + # See comment for -static flag below, for more details. + func_append compile_command " $link_static_flag" + func_append finalize_command " $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue + func_fatal_error "\`-allow-undefined' must not be used because it is the default" ;; -avoid-version) @@ -1530,6 +5525,11 @@ EOF continue ;; + -bindir) + prev=bindir + continue + ;; + -dlopen) prev=dlfiles continue @@ -1547,8 +5547,7 @@ EOF -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: more than one -exported-symbols argument is not allowed" - exit $EXIT_FAILURE + func_fatal_error "more than one -exported-symbols argument is not allowed" fi if test "X$arg" = "X-export-symbols"; then prev=expsyms @@ -1558,15 +5557,8 @@ EOF continue ;; - -framework|-arch|-isysroot) - case " $CC " in - *" ${arg} ${1} "* | *" ${arg} ${1} "*) - prev=darwin_framework_skip ;; - *) compiler_flags="$compiler_flags $arg" - prev=darwin_framework ;; - esac - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + -framework) + prev=framework continue ;; @@ -1580,55 +5572,70 @@ EOF -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix* | /*-*-irix*) - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" ;; esac continue ;; -L*) - dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` + func_stripname "-L" '' "$arg" + if test -z "$func_stripname_result"; then + if test "$#" -gt 0; then + func_fatal_error "require no space between \`-L' and \`$1'" + else + func_fatal_error "need path for \`-L' option" + fi + fi + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 - absdir="$dir" - notinst_path="$notinst_path $dir" - fi + test -z "$absdir" && \ + func_fatal_error "cannot determine absolute directory name of \`$dir'" dir="$absdir" ;; esac case "$deplibs " in - *" -L$dir "*) ;; + *" -L$dir "* | *" $arg "*) + # Will only happen for absolute or sysroot arguments + ;; *) - deplibs="$deplibs -L$dir" - lib_search_path="$lib_search_path $dir" + # Preserve sysroot, but never include relative directories + case $dir in + [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;; + *) func_append deplibs " -L$dir" ;; + esac + func_append lib_search_path " $dir" ;; esac case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'` case :$dllsearchpath: in *":$dir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dir";; + ::) dllsearchpath=$dir;; + *) func_append dllsearchpath ":$dir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; - *) dllsearchpath="$dllsearchpath:$testbindir";; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; esac ;; esac + deplibs="$deplibs $arg" continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*) # These systems don't actually have a C or math library (as such) continue ;; @@ -1642,7 +5649,7 @@ EOF ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs -framework System" + func_append deplibs " System.ltframework" continue ;; *-*-sco3.2v5* | *-*-sco5v6*) @@ -1662,25 +5669,35 @@ EOF ;; esac fi - deplibs="$deplibs $arg" + func_append deplibs " $arg" + continue + ;; + + -module) + module=yes continue ;; # Tru64 UNIX uses -model [arg] to determine the layout of C++ # classes, name mangling, and exception handling. - -model) - compile_command="$compile_command $arg" - compiler_flags="$compiler_flags $arg" - finalize_command="$finalize_command $arg" + # Darwin uses the -arch flag to determine output architecture. + -model|-arch|-isysroot|--sysroot) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" prev=xcompiler continue ;; - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - compiler_flags="$compiler_flags $arg" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - deplibs="$deplibs $arg" + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) + func_append compiler_flags " $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" + case "$new_inherited_linker_flags " in + *" $arg "*) ;; + * ) func_append new_inherited_linker_flags " $arg" ;; + esac continue ;; @@ -1689,44 +5706,6 @@ EOF continue ;; - -module) - module=yes - continue - ;; - - # -64, -mips[0-9] enable 64-bit mode on the SGI compiler - # -r[0-9][0-9]* specifies the processor on the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler - # +DA*, +DD* enable 64-bit mode on the HP compiler - # -q* pass through compiler args for the IBM compiler - # -m* pass through architecture-specific compiler args for GCC - # -m*, -t[45]*, -txscale* pass through architecture-specific - # compiler args for GCC - # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC - # -F/path gives path to uninstalled frameworks, gcc on darwin - # @file GCC response files - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) - - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - compiler_flags="$compiler_flags $arg" - continue - ;; - - -shrext) - prev=shrext - continue - ;; - -no-fast-install) fast_install=no continue @@ -1734,11 +5713,11 @@ EOF -no-install) case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) # The PATH hackery in wrapper scripts is required on Windows # and Darwin in order for the loader to find any dlls it needs. - $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 - $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + func_warning "\`-no-install' is ignored for $host" + func_warning "assuming \`-no-fast-install' instead" fast_install=no ;; *) no_install=yes ;; @@ -1779,22 +5758,36 @@ EOF ;; -R*) - dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` + func_stripname '-R' '' "$arg" + dir=$func_stripname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; + =*) + func_stripname '=' '' "$dir" + dir=$lt_sysroot$func_stripname_result + ;; *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "only absolute run-paths are allowed" ;; esac case "$xrpath " in *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; + *) func_append xrpath " $dir" ;; esac continue ;; + -shared) + # The effects of -shared are defined in a previous loop. + continue + ;; + + -shrext) + prev=shrext + continue + ;; + -static | -static-libtool-libs) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that @@ -1813,47 +5806,49 @@ EOF prev=vinfo continue ;; + -version-number) prev=vinfo vinfo_number=yes continue ;; + -weak) + prev=weak + continue + ;; + -Wc,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + func_stripname '-Wc,' '' "$arg" + args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $flag" + func_quote_for_eval "$flag" + func_append arg " $func_quote_for_eval_result" + func_append compiler_flags " $func_quote_for_eval_result" done IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + func_stripname ' ' '' "$arg" + arg=$func_stripname_result ;; -Wl,*) - args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + func_stripname '-Wl,' '' "$arg" + args=$func_stripname_result arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" - case $flag in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - flag="\"$flag\"" - ;; - esac - arg="$arg $wl$flag" - compiler_flags="$compiler_flags $wl$flag" - linker_flags="$linker_flags $flag" + func_quote_for_eval "$flag" + func_append arg " $wl$func_quote_for_eval_result" + func_append compiler_flags " $wl$func_quote_for_eval_result" + func_append linker_flags " $func_quote_for_eval_result" done IFS="$save_ifs" - arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + func_stripname ' ' '' "$arg" + arg=$func_stripname_result ;; -Xcompiler) @@ -1871,53 +5866,68 @@ EOF continue ;; + # -msg_* for osf cc + -msg_*) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + ;; + + # Flags to be passed through unchanged, with rationale: + # -64, -mips[0-9] enable 64-bit mode for the SGI compiler + # -r[0-9][0-9]* specify processor for the SGI compiler + # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler + # +DA*, +DD* enable 64-bit mode for the HP compiler + # -q* compiler args for the IBM compiler + # -m*, -t[45]*, -txscale* architecture-specific flags for GCC + # -F/path path to uninstalled frameworks, gcc on darwin + # -p, -pg, --coverage, -fprofile-* profiling flags for GCC + # @file GCC response files + # -tp=* Portland pgcc target processor selection + # --sysroot=* for sysroot support + # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ + -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ + -O*|-flto*|-fwhopr*|-fuse-linker-plugin) + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" + func_append compile_command " $arg" + func_append finalize_command " $arg" + func_append compiler_flags " $arg" + continue + ;; + # Some other compiler flag. -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" ;; *.$objext) # A standard object. - objs="$objs $arg" + func_append objs " $arg" ;; *.lo) # A libtool-controlled object. # Check to see that this really is a libtool object. - if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if func_lalib_unsafe_p "$arg"; then pic_object= non_pic_object= # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac + func_source "$arg" - if test -z "$pic_object" || \ + if test -z "$pic_object" || test -z "$non_pic_object" || - test "$pic_object" = none && \ + test "$pic_object" = none && test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot find name of object for \`$arg'" fi # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" if test "$pic_object" != none; then # Prepend the subdirectory the object is found in. @@ -1925,7 +5935,7 @@ EOF if test "$prev" = dlfiles; then if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" + func_append dlfiles " $pic_object" prev= continue else @@ -1937,12 +5947,12 @@ EOF # CHECK ME: I think I busted this. -Ossama if test "$prev" = dlprefiles; then # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" + func_append dlprefiles " $pic_object" prev= fi # A PIC object. - libobjs="$libobjs $pic_object" + func_append libobjs " $pic_object" arg="$pic_object" fi @@ -1952,7 +5962,7 @@ EOF non_pic_object="$xdir$non_pic_object" # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" + func_append non_pic_objects " $non_pic_object" if test -z "$pic_object" || test "$pic_object" = none ; then arg="$non_pic_object" fi @@ -1960,52 +5970,47 @@ EOF # If the PIC object exists, use it instead. # $xdir was prepended to $pic_object above. non_pic_object="$pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" + func_append non_pic_objects " $non_pic_object" fi else # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit $EXIT_FAILURE - else - # Dry-run case. - + if $opt_dry_run; then # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" + func_dirname "$arg" "/" "" + xdir="$func_dirname_result" + + func_lo2o "$arg" + pic_object=$xdir$objdir/$func_lo2o_result + non_pic_object=$xdir$func_lo2o_result + func_append libobjs " $pic_object" + func_append non_pic_objects " $non_pic_object" + else + func_fatal_error "\`$arg' is not a valid libtool object" fi fi ;; *.$libext) # An archive. - deplibs="$deplibs $arg" - old_deplibs="$old_deplibs $arg" + func_append deplibs " $arg" + func_append old_deplibs " $arg" continue ;; *.la) # A libtool-controlled library. + func_resolve_sysroot "$arg" if test "$prev" = dlfiles; then # This library was specified with -dlopen. - dlfiles="$dlfiles $arg" + func_append dlfiles " $func_resolve_sysroot_result" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. - dlprefiles="$dlprefiles $arg" + func_append dlprefiles " $func_resolve_sysroot_result" prev= else - deplibs="$deplibs $arg" + func_append deplibs " $func_resolve_sysroot_result" fi continue ;; @@ -2014,70 +6019,53 @@ EOF *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac + func_quote_for_eval "$arg" + arg="$func_quote_for_eval_result" ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" fi done # argument parsing loop - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test -n "$prev" && \ + func_fatal_help "the \`$prevarg' option requires an argument" if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + func_append compile_command " $arg" + func_append finalize_command " $arg" fi oldlibs= # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + func_basename "$output" + outputname="$func_basename_result" libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi + func_dirname "$output" "/" "" + output_objdir="$func_dirname_result$objdir" + func_to_tool_file "$output_objdir/" + tool_output_objdir=$func_to_tool_file_result # Create the object directory. - if test ! -d "$output_objdir"; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then - exit $exit_status - fi - fi + func_mkdir_p "$output_objdir" # Determine the type of output case $output in "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE + func_fatal_help "you must specify an output file" ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; @@ -2085,27 +6073,18 @@ EOF *) linkmode=prog ;; # Anything else should be a program. esac - case $host in - *cygwin* | *mingw* | *pw32*) - # don't eliminate duplications in $postdeps and $predeps - duplicate_compiler_generated_deps=yes - ;; - *) - duplicate_compiler_generated_deps=$duplicate_deps - ;; - esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - if test "X$duplicate_deps" = "Xyes" ; then + if $opt_preserve_dup_deps ; then case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi - libs="$libs $deplib" + func_append libs " $deplib" done if test "$linkmode" = lib; then @@ -2115,12 +6094,12 @@ EOF # $postdeps and mark them as special (i.e., whose duplicates are # not to be eliminated). pre_post_deps= - if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then + if $opt_duplicate_compiler_generated_deps; then for pre_post_dep in $predeps $postdeps; do case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; + *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;; esac - pre_post_deps="$pre_post_deps $pre_post_dep" + func_append pre_post_deps " $pre_post_dep" done fi pre_post_deps= @@ -2131,15 +6110,16 @@ EOF newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in lib) - passes="conv link" + passes="conv dlpreopen link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) - $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 - exit $EXIT_FAILURE + func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" ;; esac done @@ -2155,7 +6135,20 @@ EOF *) passes="conv" ;; esac + for pass in $passes; do + # The preopen pass in lib mode reverses $deplibs; put it back here + # so that -L comes before libs that need it for instance... + if test "$linkmode,$pass" = "lib,link"; then + ## FIXME: Find the place where the list is rebuilt in the wrong + ## order, and fix it there properly + tmp_deplibs= + for deplib in $deplibs; do + tmp_deplibs="$deplib $tmp_deplibs" + done + deplibs="$tmp_deplibs" + fi + if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan"; then libs="$deplibs" @@ -2168,21 +6161,46 @@ EOF link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac fi + if test "$linkmode,$pass" = "lib,dlpreopen"; then + # Collect and forward deplibs of preopened libtool libs + for lib in $dlprefiles; do + # Ignore non-libtool-libs + dependency_libs= + func_resolve_sysroot "$lib" + case $lib in + *.la) func_source "$func_resolve_sysroot_result" ;; + esac + + # Collect preopened libtool deplibs, except any this library + # has declared as weak libs + for deplib in $dependency_libs; do + func_basename "$deplib" + deplib_base=$func_basename_result + case " $weak_libs " in + *" $deplib_base "*) ;; + *) func_append deplibs " $deplib" ;; + esac + done + done + libs="$dlprefiles" + fi if test "$pass" = dlopen; then # Collect dlpreopened libraries save_deplibs="$deplibs" deplibs= fi + for deplib in $libs; do lib= found=no case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - compiler_flags="$compiler_flags $deplib" + func_append compiler_flags " $deplib" fi case $linkmode in @@ -2211,10 +6229,11 @@ EOF ;; -l*) if test "$linkmode" != lib && test "$linkmode" != prog; then - $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + func_warning "\`-l' is ignored for archives/objects" continue fi - name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + func_stripname '-l' '' "$deplib" + name=$func_stripname_result if test "$linkmode" = lib; then searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" else @@ -2250,21 +6269,17 @@ EOF if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $deplib "*) - if (${SED} -e '2q' $lib | - grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if func_lalib_p "$lib"; then library_names= old_library= - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac + func_source "$lib" for l in $old_library $library_names; do ll="$l" done if test "X$ll" = "X$old_library" ; then # only static version available found=no - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." + func_dirname "$lib" "" "." + ladir="$func_dirname_result" lib=$ladir/$old_library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" @@ -2276,19 +6291,36 @@ EOF continue fi fi - ;; + ;; *) ;; esac fi fi ;; # -l + *.ltframework) + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + if test "$linkmode" = lib ; then + case "$new_inherited_linker_flags " in + *" $deplib "*) ;; + * ) func_append new_inherited_linker_flags " $deplib" ;; + esac + fi + fi + continue + ;; -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" ;; prog) if test "$pass" = conv; then @@ -2301,27 +6333,34 @@ EOF compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi - newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" ;; *) - $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + func_warning "\`-L' is ignored for archives/objects" ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then - dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + func_stripname '-R' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + dir=$func_resolve_sysroot_result # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; + *) func_append xrpath " $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; - *.la) lib="$deplib" ;; + *.la) + func_resolve_sysroot "$deplib" + lib=$func_resolve_sysroot_result + ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" @@ -2329,35 +6368,41 @@ EOF fi case $linkmode in lib) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` - if eval $echo \"$deplib\" 2>/dev/null \ - | $SED 10q \ + # Linking convenience modules into shared libraries is allowed, + # but linking other static libraries is non-portable. + case " $dlpreconveniencelibs " in + *" $deplib "*) ;; + *) + valid_a_lib=no + case $deplibs_check_method in + match_pattern*) + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` + if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \ | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi + valid_a_lib=yes + fi ;; - pass_all) - valid_a_lib=yes + pass_all) + valid_a_lib=yes ;; - esac - if test "$valid_a_lib" != yes; then - $echo - $echo "*** Warning: Trying to link with static lib archive $deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because the file extensions .$libext of this argument makes me believe" - $echo "*** that it is just a static archive that I should not used here." - else - $echo - $echo "*** Warning: Linking the shared library $output against the" - $echo "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi + esac + if test "$valid_a_lib" != yes; then + echo + $ECHO "*** Warning: Trying to link with static lib archive $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not use here." + else + echo + $ECHO "*** Warning: Linking the shared library $output against the" + $ECHO "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + ;; + esac continue ;; prog) @@ -2378,11 +6423,11 @@ EOF if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. - newdlprefiles="$newdlprefiles $deplib" + func_append newdlprefiles " $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else - newdlfiles="$newdlfiles $deplib" + func_append newdlfiles " $deplib" fi fi continue @@ -2392,21 +6437,18 @@ EOF continue ;; esac # case $deplib + if test "$found" = yes || test -f "$lib"; then : else - $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" fi # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi + func_lalib_unsafe_p "$lib" \ + || func_fatal_error "\`$lib' is not a valid libtool archive" - ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` - test "X$ladir" = "X$lib" && ladir="." + func_dirname "$lib" "" "." + ladir="$func_dirname_result" dlname= dlopen= @@ -2414,6 +6456,7 @@ EOF libdir= library_names= old_library= + inherited_linker_flags= # If the library was installed with an old release of libtool, # it will not redefine variables installed, or shouldnotlink installed=yes @@ -2422,16 +6465,24 @@ EOF # Read the .la file - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - + func_source "$lib" + + # Convert "-framework foo" to "foo.ltframework" + if test -n "$inherited_linker_flags"; then + tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'` + for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do + case " $new_inherited_linker_flags " in + *" $tmp_inherited_linker_flag "*) ;; + *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";; + esac + done + fi + dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && dlfiles="$dlfiles $dlopen" - test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + test -n "$dlopen" && func_append dlfiles " $dlopen" + test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen" fi if test "$pass" = conv; then @@ -2439,45 +6490,47 @@ EOF deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot find name of link library for \`$lib'" fi # It is a libtool convenience library, so add in its objects. - convenience="$convenience $ladir/$objdir/$old_library" - old_convenience="$old_convenience $ladir/$objdir/$old_library" - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if test "X$duplicate_deps" = "Xyes" ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done + func_append convenience " $ladir/$objdir/$old_library" + func_append old_convenience " $ladir/$objdir/$old_library" elif test "$linkmode" != prog && test "$linkmode" != lib; then - $echo "$modename: \`$lib' is not a convenience library" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "\`$lib' is not a convenience library" fi + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + if $opt_preserve_dup_deps ; then + case "$tmp_libs " in + *" $deplib "*) func_append specialdeplibs " $deplib" ;; + esac + fi + func_append tmp_libs " $deplib" + done continue fi # $pass = conv # Get the name of the library we link against. linklib= - for l in $old_library $library_names; do - linklib="$l" - done + if test -n "$old_library" && + { test "$prefer_static_libs" = yes || + test "$prefer_static_libs,$installed" = "built,no"; }; then + linklib=$old_library + else + for l in $old_library $library_names; do + linklib="$l" + done + fi if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot find name of link library for \`$lib'" fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then - $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE + func_fatal_error "cannot -dlopen a convenience library: \`$lib'" fi if test -z "$dlname" || test "$dlopen_support" != yes || @@ -2486,9 +6539,9 @@ EOF # statically, we need to preload. We also need to preload any # dependent libraries so libltdl's deplib preloader doesn't # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" + func_append dlprefiles " $lib $dependency_libs" else - newdlfiles="$newdlfiles $lib" + func_append newdlfiles " $lib" fi continue fi # $pass = dlopen @@ -2499,24 +6552,25 @@ EOF *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + func_warning "cannot determine absolute directory name of \`$ladir'" + func_warning "passing it literally to the linker, although it might fail" abs_ladir="$ladir" fi ;; esac - laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + func_basename "$lib" + laname="$func_basename_result" # Find the relevant object directory and library name. if test "X$installed" = Xyes; then - if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - $echo "$modename: warning: library \`$lib' was moved." 1>&2 + if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + func_warning "library \`$lib' was moved." dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else - dir="$libdir" - absdir="$libdir" + dir="$lt_sysroot$libdir" + absdir="$lt_sysroot$libdir" fi test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes else @@ -2524,32 +6578,62 @@ EOF dir="$ladir" absdir="$abs_ladir" # Remove this search path later - notinst_path="$notinst_path $abs_ladir" + func_append notinst_path " $abs_ladir" else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later - notinst_path="$notinst_path $abs_ladir" + func_append notinst_path " $abs_ladir" fi fi # $installed = yes - name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + func_stripname 'lib' '.la' "$laname" + name=$func_stripname_result # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then - if test -z "$libdir"; then - $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 - exit $EXIT_FAILURE - fi - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - newdlprefiles="$newdlprefiles $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - newdlprefiles="$newdlprefiles $dir/$dlname" - else - newdlprefiles="$newdlprefiles $dir/$linklib" + if test -z "$libdir" && test "$linkmode" = prog; then + func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" fi + case "$host" in + # special handling for platforms with PE-DLLs. + *cygwin* | *mingw* | *cegcc* ) + # Linker will automatically link against shared library if both + # static and shared are present. Therefore, ensure we extract + # symbols from the import library if a shared library is present + # (otherwise, the dlopen module name will be incorrect). We do + # this by putting the import library name into $newdlprefiles. + # We recover the dlopen module name by 'saving' the la file + # name in a special purpose variable, and (later) extracting the + # dlname from the la file. + if test -n "$dlname"; then + func_tr_sh "$dir/$linklib" + eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname" + func_append newdlprefiles " $dir/$linklib" + else + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + fi + ;; + * ) + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). + if test -n "$old_library"; then + func_append newdlprefiles " $dir/$old_library" + # Keep a list of preopened convenience libraries to check + # that they are being used correctly in the link pass. + test -z "$libdir" && \ + func_append dlpreconveniencelibs " $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + func_append newdlprefiles " $dir/$dlname" + else + func_append newdlprefiles " $dir/$linklib" + fi + ;; + esac fi # $pass = dlpreopen if test -z "$libdir"; then @@ -2567,7 +6651,7 @@ EOF if test "$linkmode" = prog && test "$pass" != link; then - newlib_search_path="$newlib_search_path $ladir" + func_append newlib_search_path " $ladir" deplibs="$lib $deplibs" linkalldeplibs=no @@ -2579,7 +6663,10 @@ EOF tmp_libs= for deplib in $dependency_libs; do case $deplib in - -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result" + func_append newlib_search_path " $func_resolve_sysroot_result" + ;; esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then @@ -2589,12 +6676,12 @@ EOF # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - if test "X$duplicate_deps" = "Xyes" ; then + if $opt_preserve_dup_deps ; then case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + *" $deplib "*) func_append specialdeplibs " $deplib" ;; esac fi - tmp_libs="$tmp_libs $deplib" + func_append tmp_libs " $deplib" done # for deplib continue fi # $linkmode = prog... @@ -2602,15 +6689,14 @@ EOF if test "$linkmode,$pass" = "prog,link"; then if test -n "$library_names" && { { test "$prefer_static_libs" = no || - test "$prefer_static_libs,$installed" = "built,yes"; } || + test "$prefer_static_libs,$installed" = "built,yes"; } || test -z "$old_library"; }; then # We need to hardcode the library path if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $absdir" ;; + case "$temp_rpath:" in + *"$absdir:"*) ;; + *) func_append temp_rpath "$absdir:" ;; esac fi @@ -2622,7 +6708,7 @@ EOF *) case "$compile_rpath " in *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" + *) func_append compile_rpath " $absdir" ;; esac ;; esac @@ -2631,7 +6717,7 @@ EOF *) case "$finalize_rpath " in *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" + *) func_append finalize_rpath " $libdir" ;; esac ;; esac @@ -2648,27 +6734,43 @@ EOF link_static=no # Whether the deplib will be linked statically use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes ; then + if test "$use_static_libs" = built && test "$installed" = yes; then use_static_libs=no fi if test -n "$library_names" && { test "$use_static_libs" = no || test -z "$old_library"; }; then - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes - fi + case $host in + *cygwin* | *mingw* | *cegcc*) + # No point in relinking DLLs because paths are not encoded + func_append notinst_deplibs " $lib" + need_relink=no + ;; + *) + if test "$installed" = no; then + func_append notinst_deplibs " $lib" + need_relink=yes + fi + ;; + esac # This is a shared library - # Warn about portability, can't link against -module's on - # some systems (darwin) - if test "$shouldnotlink" = yes && test "$pass" = link ; then - $echo + # Warn about portability, can't link against -module's on some + # systems (darwin). Don't bleat about dlopened modules though! + dlopenmodule="" + for dlpremoduletest in $dlprefiles; do + if test "X$dlpremoduletest" = "X$lib"; then + dlopenmodule="$dlpremoduletest" + break + fi + done + if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then + echo if test "$linkmode" = prog; then - $echo "*** Warning: Linking the executable $output against the loadable module" + $ECHO "*** Warning: Linking the executable $output against the loadable module" else - $echo "*** Warning: Linking the shared library $output against the loadable module" + $ECHO "*** Warning: Linking the shared library $output against the loadable module" fi - $echo "*** $linklib is not portable!" + $ECHO "*** $linklib is not portable!" fi if test "$linkmode" = lib && test "$hardcode_into_libs" = yes; then @@ -2680,7 +6782,7 @@ EOF *) case "$compile_rpath " in *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" + *) func_append compile_rpath " $absdir" ;; esac ;; esac @@ -2689,7 +6791,7 @@ EOF *) case "$finalize_rpath " in *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" + *) func_append finalize_rpath " $libdir" ;; esac ;; esac @@ -2698,17 +6800,19 @@ EOF if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names - realname="$2" - shift; shift - libname=`eval \\$echo \"$libname_spec\"` + shift + realname="$1" + shift + libname=`eval "\\$ECHO \"$libname_spec\""` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in - *cygwin* | mingw*) - major=`expr $current - $age` + *cygwin* | mingw* | *cegcc*) + func_arith $current - $age + major=$func_arith_result versuffix="-$major" ;; esac @@ -2719,43 +6823,29 @@ EOF # Make a new name for the extract_expsyms_cmds to use soroot="$soname" - soname=`$echo $soroot | ${SED} -e 's/^.*\///'` - newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + func_basename "$soroot" + soname="$func_basename_result" + func_stripname 'lib' '.dll' "$soname" + newlib=libimp-$func_stripname_result.a # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else - $show "extracting exported symbol list from \`$soname'" - save_ifs="$IFS"; IFS='~' - cmds=$extract_expsyms_cmds - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_verbose "extracting exported symbol list from \`$soname'" + func_execute_cmds "$extract_expsyms_cmds" 'exit $?' fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else - $show "generating import library for \`$soname'" - save_ifs="$IFS"; IFS='~' - cmds=$old_archive_from_expsyms_cmds - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_verbose "generating import library for \`$soname'" + func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" - if test "$linkmode" = prog || test "$mode" != relink; then + if test "$linkmode" = prog || test "$opt_mode" != relink; then add_shlibpath= add_dir= add= @@ -2770,17 +6860,21 @@ EOF *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ *-*-unixware7*) add_dir="-L$dir" ;; *-*-darwin* ) - # if the lib is a module then we can not link against - # it, someone is ignoring the new warnings I added + # if the lib is a (non-dlopened) module then we can not + # link against it, someone is ignoring the earlier warnings if /usr/bin/file -L $add 2> /dev/null | - $EGREP ": [^:]* bundle" >/dev/null ; then - $echo "** Warning, lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then - $echo - $echo "** And there doesn't seem to be a static archive available" - $echo "** The link will probably fail, sorry" - else - add="$dir/$old_library" + $GREP ": [^:]* bundle" >/dev/null ; then + if test "X$dlopenmodule" != "X$lib"; then + $ECHO "*** Warning: lib $linklib is a module, not a shared library" + if test -z "$old_library" ; then + echo + echo "*** And there doesn't seem to be a static archive available" + echo "*** The link will probably fail, sorry" + else + add="$dir/$old_library" + fi + elif test -n "$old_library"; then + add="$dir/$old_library" fi fi esac @@ -2798,15 +6892,16 @@ EOF fi ;; relink) - if test "$hardcode_direct" = yes; then + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then - add_dir="-L$dir" + add_dir="-L$absdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" + func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi @@ -2822,14 +6917,13 @@ EOF esac if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit $EXIT_FAILURE + func_fatal_configuration "unsupported hardcode properties" fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; - *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + *) func_append compile_shlibpath "$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then @@ -2838,23 +6932,24 @@ EOF else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && \ - test "$hardcode_minus_L" != yes && \ + if test "$hardcode_direct" != yes && + test "$hardcode_minus_L" != yes && test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + *) func_append finalize_shlibpath "$libdir:" ;; esac fi fi fi - if test "$linkmode" = prog || test "$mode" = relink; then + if test "$linkmode" = prog || test "$opt_mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then + if test "$hardcode_direct" = yes && + test "$hardcode_direct_absolute" = no; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" @@ -2862,15 +6957,15 @@ EOF elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + *) func_append finalize_shlibpath "$libdir:" ;; esac add="-l$name" elif test "$hardcode_automatic" = yes; then if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" + add="$inst_prefix_dir$libdir/$linklib" else - add="$libdir/$linklib" + add="$libdir/$linklib" fi else # We cannot seem to hardcode it, guess we'll fake it. @@ -2879,7 +6974,7 @@ EOF if test -n "$inst_prefix_dir"; then case $libdir in [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" + func_append add_dir " -L$inst_prefix_dir$libdir" ;; esac fi @@ -2914,21 +7009,21 @@ EOF # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. - $echo - $echo "*** Warning: This system can not link to static lib archive $lib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have." + echo + $ECHO "*** Warning: This system can not link to static lib archive $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - $echo "*** But as you try to build a module library, libtool will still create " - $echo "*** a static module, that should work as long as the dlopening application" - $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - $echo - $echo "*** However, this would only work if libtool was able to extract symbol" - $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - $echo "*** not find such a program. So, this module is probably useless." - $echo "*** \`nm' from GNU binutils and a full rebuild may help." + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module @@ -2952,126 +7047,113 @@ EOF temp_deplibs= for libdir in $dependency_libs; do case $libdir in - -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + -R*) func_stripname '-R' '' "$libdir" + temp_xrpath=$func_stripname_result case " $xrpath " in *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; + *) func_append xrpath " $temp_xrpath";; esac;; - *) temp_deplibs="$temp_deplibs $libdir";; + *) func_append temp_deplibs " $libdir";; esac done dependency_libs="$temp_deplibs" fi - newlib_search_path="$newlib_search_path $absdir" + func_append newlib_search_path " $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" - if test "X$duplicate_deps" = "Xyes" ; then + case $deplib in + -L*) func_stripname '-L' '' "$deplib" + func_resolve_sysroot "$func_stripname_result";; + *) func_resolve_sysroot "$deplib" ;; + esac + if $opt_preserve_dup_deps ; then case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + *" $func_resolve_sysroot_result "*) + func_append specialdeplibs " $func_resolve_sysroot_result" ;; esac fi - tmp_libs="$tmp_libs $deplib" + func_append tmp_libs " $func_resolve_sysroot_result" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do + path= case $deplib in -L*) path="$deplib" ;; *.la) - dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$deplib" && dir="." + func_resolve_sysroot "$deplib" + deplib=$func_resolve_sysroot_result + func_dirname "$deplib" "" "." + dir=$func_dirname_result # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + func_warning "cannot determine absolute directory name of \`$dir'" absdir="$dir" fi ;; esac - if grep "^installed=no" $deplib > /dev/null; then - path="$absdir/$objdir" - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - if test "$absdir" != "$libdir"; then - $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 - fi - path="$absdir" - fi - depdepl= + if $GREP "^installed=no" $deplib > /dev/null; then case $host in *-*-darwin*) - # we do not want to link against static libs, - # but need to link against shared + depdepl= eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -n "$deplibrary_names" ; then for tmp in $deplibrary_names ; do depdepl=$tmp done - if test -f "$deplibdir/$depdepl" ; then - depdepl="$deplibdir/$depdepl" - elif test -f "$path/$depdepl" ; then - depdepl="$path/$depdepl" - else - # Can't find it, oh well... - depdepl= + if test -f "$absdir/$objdir/$depdepl" ; then + depdepl="$absdir/$objdir/$depdepl" + darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + if test -z "$darwin_install_name"; then + darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` + fi + func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" + func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}" + path= fi - # do not add paths which are already there - case " $newlib_search_path " in - *" $path "*) ;; - *) newlib_search_path="$newlib_search_path $path";; - esac fi - path="" ;; *) - path="-L$path" + path="-L$absdir/$objdir" ;; esac + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + test "$absdir" != "$libdir" && \ + func_warning "\`$deplib' seems to be moved" + + path="-L$absdir" + fi ;; - -l*) - case $host in - *-*-darwin*) - # Again, we only want to link against shared libraries - eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` - for tmp in $newlib_search_path ; do - if test -f "$tmp/lib$tmp_libs.dylib" ; then - eval depdepl="$tmp/lib$tmp_libs.dylib" - break - fi - done - path="" - ;; - *) continue ;; - esac - ;; - *) continue ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$path $deplibs" ;; esac - case " $deplibs " in - *" $depdepl "*) ;; - *) deplibs="$depdepl $deplibs" ;; - esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs + if test "$pass" = link; then + if test "$linkmode" = "prog"; then + compile_deplibs="$new_inherited_linker_flags $compile_deplibs" + finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" + else + compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + fi + fi dependency_libs="$newdependency_libs" if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries @@ -3086,7 +7168,7 @@ EOF for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir" ;; + *) func_append lib_search_path " $dir" ;; esac done newlib_search_path= @@ -3144,10 +7226,10 @@ EOF -L*) case " $tmp_libs " in *" $deplib "*) ;; - *) tmp_libs="$tmp_libs $deplib" ;; + *) func_append tmp_libs " $deplib" ;; esac ;; - *) tmp_libs="$tmp_libs $deplib" ;; + *) func_append tmp_libs " $deplib" ;; esac done eval $var=\"$tmp_libs\" @@ -3163,99 +7245,96 @@ EOF ;; esac if test -n "$i" ; then - tmp_libs="$tmp_libs $i" + func_append tmp_libs " $i" fi done dependency_libs=$tmp_libs done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" + fi + if test "$linkmode" = prog || test "$linkmode" = lib; then dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for archives" + fi + case " $deplibs" in *\ -l* | *\ -L*) - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;; + func_warning "\`-l' and \`-L' are ignored for archives" ;; esac - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 - fi + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for archives" - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 - fi + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for archives" - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for archives" - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi + test -n "$release" && \ + func_warning "\`-release' is ignored for archives" - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi + test -n "$export_symbols$export_symbols_regex" && \ + func_warning "\`-export-symbols' is ignored for archives" # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" - objs="$objs$old_deplibs" + func_append objs "$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + func_stripname 'lib' '.la' "$outputname" + name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" ;; *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test "$module" = no && \ + func_fatal_help "libtool library \`$output' must begin with \`lib'" + if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + func_stripname '' '.la' "$outputname" + name=$func_stripname_result eval shared_ext=\"$shrext_cmds\" eval libname=\"$libname_spec\" else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` + func_stripname '' '.la' "$outputname" + libname=$func_stripname_result fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 - exit $EXIT_FAILURE + func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" else - $echo - $echo "*** Warning: Linking the shared library $output against the non-libtool" - $echo "*** objects $objs is not portable!" - libobjs="$libobjs $objs" + echo + $ECHO "*** Warning: Linking the shared library $output against the non-libtool" + $ECHO "*** objects $objs is not portable!" + func_append libobjs " $objs" fi fi - if test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 - fi + test "$dlself" != no && \ + func_warning "\`-dlopen self' is ignored for libtool libraries" set dummy $rpath - if test "$#" -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" + shift + test "$#" -gt 1 && \ + func_warning "ignoring multiple \`-rpath's for a libtool library" + + install_libdir="$1" oldlibs= if test -z "$rpath"; then @@ -3269,25 +7348,21 @@ EOF build_old_libs=yes fi - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info/-version-number' is ignored for convenience libraries" - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi + test -n "$release" && \ + func_warning "\`-release' is ignored for convenience libraries" else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 + shift IFS="$save_ifs" - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test -n "$7" && \ + func_fatal_help "too many parameters to \`-version-info'" # convert absolute version numbers to libtool ages # this retains compatibility with .la files and attempts @@ -3295,9 +7370,9 @@ EOF case $vinfo_number in yes) - number_major="$2" - number_minor="$3" - number_revision="$4" + number_major="$1" + number_minor="$2" + number_revision="$3" # # There are really only two kinds -- those that # use the current revision as the major version @@ -3306,18 +7381,21 @@ EOF # which has an extra 1 added just for fun # case $version_type in + # correct linux to gnu/linux during the next big refactor darwin|linux|osf|windows|none) - current=`expr $number_major + $number_minor` + func_arith $number_major + $number_minor + current=$func_arith_result age="$number_minor" revision="$number_revision" ;; - freebsd-aout|freebsd-elf|sunos) + freebsd-aout|freebsd-elf|qnx|sunos) current="$number_major" revision="$number_minor" age="0" ;; irix|nonstopux) - current=`expr $number_major + $number_minor` + func_arith $number_major + $number_minor + current=$func_arith_result age="$number_minor" revision="$number_minor" lt_irix_increment=no @@ -3325,9 +7403,9 @@ EOF esac ;; no) - current="$2" - revision="$3" - age="$4" + current="$1" + revision="$2" + age="$3" ;; esac @@ -3335,34 +7413,30 @@ EOF case $current in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + func_error "CURRENT \`$current' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $revision in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + func_error "REVISION \`$revision' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" ;; esac case $age in 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; *) - $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + func_error "AGE \`$age' must be a nonnegative integer" + func_fatal_error "\`$vinfo' is not valid version information" ;; esac if test "$age" -gt "$current"; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit $EXIT_FAILURE + func_error "AGE \`$age' is greater than the current interface number \`$current'" + func_fatal_error "\`$vinfo' is not valid version information" fi # Calculate the version variables. @@ -3375,10 +7449,12 @@ EOF darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header - major=.`expr $current - $age` + func_arith $current - $age + major=.$func_arith_result versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... - minor_current=`expr $current + 1` + func_arith $current + 1 + minor_current=$func_arith_result xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; @@ -3390,15 +7466,17 @@ EOF freebsd-elf) major=".$current" - versuffix=".$current"; + versuffix=".$current" ;; irix | nonstopux) if test "X$lt_irix_increment" = "Xno"; then - major=`expr $current - $age` + func_arith $current - $age else - major=`expr $current - $age + 1` + func_arith $current - $age + 1 fi + major=$func_arith_result + case $version_type in nonstopux) verstring_prefix=nonstopux ;; *) verstring_prefix=sgi ;; @@ -3408,8 +7486,10 @@ EOF # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do - iface=`expr $revision - $loop` - loop=`expr $loop - 1` + func_arith $revision - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result verstring="$verstring_prefix$major.$iface:$verstring" done @@ -3418,26 +7498,35 @@ EOF versuffix="$major.$revision" ;; - linux) - major=.`expr $current - $age` + linux) # correct to gnu/linux during the next big refactor + func_arith $current - $age + major=.$func_arith_result versuffix="$major.$age.$revision" ;; osf) - major=.`expr $current - $age` + func_arith $current - $age + major=.$func_arith_result versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` + func_arith $current - $loop + iface=$func_arith_result + func_arith $loop - 1 + loop=$func_arith_result verstring="$verstring:${iface}.0" done # Make executables depend on our current version. - verstring="$verstring:${current}.0" + func_append verstring ":${current}.0" + ;; + + qnx) + major=".$current" + versuffix=".$current" ;; sunos) @@ -3448,14 +7537,13 @@ EOF windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. - major=`expr $current - $age` + func_arith $current - $age + major=$func_arith_result versuffix="-$major" ;; *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit $EXIT_FAILURE + func_fatal_configuration "unknown library version type \`$version_type'" ;; esac @@ -3489,7 +7577,7 @@ EOF # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 + func_warning "undefined symbols not allowed in $host shared libraries" build_libtool_libs=no build_old_libs=yes fi @@ -3497,58 +7585,62 @@ EOF # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi + fi - if test "$mode" != relink; then + func_generate_dlsyms "$libname" "$libname" "yes" + func_append libobjs " $symfileobj" + test "X$libobjs" = "X " && libobjs= + + if test "$opt_mode" != relink; then # Remove our outputs, but don't remove object files since they # may have been created when compiling PIC objects. removelist= - tempremovelist=`$echo "$output_objdir/*"` + tempremovelist=`$ECHO "$output_objdir/*"` for p in $tempremovelist; do case $p in - *.$objext) + *.$objext | *.gcno) ;; $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) if test "X$precious_files_regex" != "X"; then - if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then + if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 + then continue fi fi - removelist="$removelist $p" + func_append removelist " $p" ;; *) ;; esac done - if test -n "$removelist"; then - $show "${rm}r $removelist" - $run ${rm}r $removelist - fi + test -n "$removelist" && \ + func_show_eval "${RM}r \$removelist" fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" + func_append oldlibs " $output_objdir/$libname.$libext" # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` + oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP` fi # Eliminate all temporary directories. #for path in $notinst_path; do - # lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` - # deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` - # dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` + # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"` + # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"` + # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"` #done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" + func_replace_sysroot "$libdir" + func_append temp_xrpath " -R$func_replace_sysroot_result" case "$finalize_rpath " in *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; + *) func_append finalize_rpath " $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then @@ -3562,7 +7654,7 @@ EOF for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; - *) dlfiles="$dlfiles $lib" ;; + *) func_append dlfiles " $lib" ;; esac done @@ -3572,19 +7664,19 @@ EOF for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; - *) dlprefiles="$dlprefiles $lib" ;; + *) func_append dlprefiles " $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework - deplibs="$deplibs -framework System" + func_append deplibs " System.ltframework" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. @@ -3598,10 +7690,10 @@ EOF *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) # Compiler inserts libc in the correct place for threads to work ;; - *) + *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then - deplibs="$deplibs -lc" + func_append deplibs " -lc" fi ;; esac @@ -3635,120 +7727,139 @@ EOF # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. - $rm conftest.c + $opt_dry_run || $RM conftest.c cat > conftest.c <<EOF int main() { return 0; } EOF - $rm conftest + $opt_dry_run || $RM conftest if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then ldd_output=`ldd conftest` for i in $deplibs; do - name=`expr $i : '-l\(.*\)'` - # If $name is empty we are operating on a -L argument. - if test "$name" != "" && test "$name" != "0"; then + case $i in + -l*) + func_stripname -l '' "$i" + name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) - newdeplibs="$newdeplibs $i" + func_append newdeplibs " $i" i="" ;; esac - fi + fi if test -n "$i" ; then - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 + libname=`eval "\\$ECHO \"$libname_spec\""` + deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" + func_append newdeplibs " $i" else droppeddeps=yes - $echo - $echo "*** Warning: dynamic linker does not accept needed library $i." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which I believe you do not have" - $echo "*** because a test_compile did reveal that the linker did not use it for" - $echo "*** its dynamic dependency list that programs get resolved with at runtime." + echo + $ECHO "*** Warning: dynamic linker does not accept needed library $i." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which I believe you do not have" + echo "*** because a test_compile did reveal that the linker did not use it for" + echo "*** its dynamic dependency list that programs get resolved with at runtime." fi fi - else - newdeplibs="$newdeplibs $i" - fi + ;; + *) + func_append newdeplibs " $i" + ;; + esac done else # Error occurred in the first compile. Let's try to salvage # the situation: Compile a separate program for each library. for i in $deplibs; do - name=`expr $i : '-l\(.*\)'` - # If $name is empty we are operating on a -L argument. - if test "$name" != "" && test "$name" != "0"; then - $rm conftest + case $i in + -l*) + func_stripname -l '' "$i" + name=$func_stripname_result + $opt_dry_run || $RM conftest if $LTCC $LTCFLAGS -o conftest conftest.c $i; then ldd_output=`ldd conftest` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $i "*) - newdeplibs="$newdeplibs $i" + func_append newdeplibs " $i" i="" ;; esac fi if test -n "$i" ; then - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 + libname=`eval "\\$ECHO \"$libname_spec\""` + deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` + set dummy $deplib_matches; shift + deplib_match=$1 if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" + func_append newdeplibs " $i" else droppeddeps=yes - $echo - $echo "*** Warning: dynamic linker does not accept needed library $i." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because a test_compile did reveal that the linker did not use this one" - $echo "*** as a dynamic dependency that programs can get resolved with at runtime." + echo + $ECHO "*** Warning: dynamic linker does not accept needed library $i." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because a test_compile did reveal that the linker did not use this one" + echo "*** as a dynamic dependency that programs can get resolved with at runtime." fi fi else droppeddeps=yes - $echo - $echo "*** Warning! Library $i is needed by this library but I was not able to" - $echo "*** make it link in! You will probably need to install it or some" - $echo "*** library that it depends on before this library will be fully" - $echo "*** functional. Installing it before continuing would be even better." + echo + $ECHO "*** Warning! Library $i is needed by this library but I was not able to" + echo "*** make it link in! You will probably need to install it or some" + echo "*** library that it depends on before this library will be fully" + echo "*** functional. Installing it before continuing would be even better." fi - else - newdeplibs="$newdeplibs $i" - fi + ;; + *) + func_append newdeplibs " $i" + ;; + esac done fi ;; file_magic*) - set dummy $deplibs_check_method - file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + set dummy $deplibs_check_method; shift + file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do - name=`expr $a_deplib : '-l\(.*\)'` - # If $name is empty we are operating on a -L argument. - if test "$name" != "" && test "$name" != "0"; then + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" + func_append newdeplibs " $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then - libname=`eval \\$echo \"$libname_spec\"` + libname=`eval "\\$ECHO \"$libname_spec\""` + if test -n "$file_magic_glob"; then + libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob` + else + libnameglob=$libname + fi + test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + if test "$want_nocaseglob" = yes; then + shopt -s nocaseglob + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + $nocaseglob + else + potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null` + fi for potent_lib in $potential_libs; do # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null \ - | grep " -> " >/dev/null; then + if ls -lLd "$potent_lib" 2>/dev/null | + $GREP " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an @@ -3761,13 +7872,13 @@ EOF potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; + *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";; esac done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | ${SED} 10q \ - | $EGREP "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | + $SED -e 10q | + $EGREP "$file_magic_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi @@ -3776,50 +7887,52 @@ EOF fi if test -n "$a_deplib" ; then droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for file magic test)" + $ECHO "*** with $libname but no candidates were found. (...for file magic test)" else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a file magic. Last file checked: $potlib" + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a file magic. Last file checked: $potlib" fi fi - else + ;; + *) # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi + func_append newdeplibs " $a_deplib" + ;; + esac done # Gone through all deplibs. ;; match_pattern*) - set dummy $deplibs_check_method - match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + set dummy $deplibs_check_method; shift + match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` for a_deplib in $deplibs; do - name=`expr $a_deplib : '-l\(.*\)'` - # If $name is empty we are operating on a -L argument. - if test -n "$name" && test "$name" != "0"; then + case $a_deplib in + -l*) + func_stripname -l '' "$a_deplib" + name=$func_stripname_result if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then case " $predeps $postdeps " in *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" + func_append newdeplibs " $a_deplib" a_deplib="" ;; esac fi if test -n "$a_deplib" ; then - libname=`eval \\$echo \"$libname_spec\"` + libname=`eval "\\$ECHO \"$libname_spec\""` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do potlib="$potent_lib" # see symlink-check above in file_magic test - if eval $echo \"$potent_lib\" 2>/dev/null \ - | ${SED} 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" + if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \ + $EGREP "$match_pattern_regex" > /dev/null; then + func_append newdeplibs " $a_deplib" a_deplib="" break 2 fi @@ -3828,46 +7941,48 @@ EOF fi if test -n "$a_deplib" ; then droppeddeps=yes - $echo - $echo "*** Warning: linker path does not have real file for library $a_deplib." - $echo "*** I have the capability to make that library automatically link in when" - $echo "*** you link to this library. But I can only do this if you have a" - $echo "*** shared version of the library, which you do not appear to have" - $echo "*** because I did check the linker path looking for a file starting" + echo + $ECHO "*** Warning: linker path does not have real file for library $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" if test -z "$potlib" ; then - $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" else - $echo "*** with $libname and none of the candidates passed a file format test" - $echo "*** using a regex pattern. Last file checked: $potlib" + $ECHO "*** with $libname and none of the candidates passed a file format test" + $ECHO "*** using a regex pattern. Last file checked: $potlib" fi fi - else + ;; + *) # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi + func_append newdeplibs " $a_deplib" + ;; + esac done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" - tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g'` + tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'` if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then for i in $predeps $postdeps ; do # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` + tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"` done fi - if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ - | grep . >/dev/null; then - $echo + case $tmp_deplibs in + *[!\ \ ]*) + echo if test "X$deplibs_check_method" = "Xnone"; then - $echo "*** Warning: inter-library dependencies are not supported in this platform." + echo "*** Warning: inter-library dependencies are not supported in this platform." else - $echo "*** Warning: inter-library dependencies are not known to be supported." + echo "*** Warning: inter-library dependencies are not known to be supported." fi - $echo "*** All declared inter-library dependencies are being dropped." + echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes - fi + ;; + esac ;; esac versuffix=$versuffix_save @@ -3878,24 +7993,24 @@ EOF case $host in *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + # On Rhapsody replace the C library with the System framework + newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then - $echo - $echo "*** Warning: libtool could not satisfy all declared inter-library" - $echo "*** dependencies of module $libname. Therefore, libtool will create" - $echo "*** a static module, that should work as long as the dlopening" - $echo "*** application is linked with the -dlopen flag." + echo + echo "*** Warning: libtool could not satisfy all declared inter-library" + $ECHO "*** dependencies of module $libname. Therefore, libtool will create" + echo "*** a static module, that should work as long as the dlopening" + echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then - $echo - $echo "*** However, this would only work if libtool was able to extract symbol" - $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - $echo "*** not find such a program. So, this module is probably useless." - $echo "*** \`nm' from GNU binutils and a full rebuild may help." + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" @@ -3905,16 +8020,16 @@ EOF build_libtool_libs=no fi else - $echo "*** The inter-library dependencies that have been dropped here will be" - $echo "*** automatically added whenever a program is linked with this library" - $echo "*** or is declared to -dlopen it." + echo "*** The inter-library dependencies that have been dropped here will be" + echo "*** automatically added whenever a program is linked with this library" + echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then - $echo - $echo "*** Since this library must not contain undefined symbols," - $echo "*** because either the platform does not support them or" - $echo "*** it was explicitly requested with -no-undefined," - $echo "*** libtool will only create a static version of it." + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module @@ -3928,7 +8043,14 @@ EOF # Done checking deplibs! deplibs=$newdeplibs fi - + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + case $host in + *-*-darwin*) + newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; + esac # move library search paths that coincide with paths to not yet # installed libraries to the beginning of the library search list @@ -3939,7 +8061,7 @@ EOF *) case " $deplibs " in *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; + func_append new_libs " -L$path/$objdir" ;; esac ;; esac @@ -3949,15 +8071,14 @@ EOF -L*) case " $new_libs " in *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; + *) func_append new_libs " $deplib" ;; esac ;; - *) new_libs="$new_libs $deplib" ;; + *) func_append new_libs " $deplib" ;; esac done deplibs="$new_libs" - # All the library-specific variables (install_libdir is set above). library_names= old_library= @@ -3965,15 +8086,22 @@ EOF # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then + # Remove ${wl} instances when linking with ld. + # FIXME: should test the right _cmds variable. + case $archive_cmds in + *\$LD\ *) wl= ;; + esac if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" - test "$mode" != relink && rpath="$compile_rpath$rpath" + test "$opt_mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then + func_replace_sysroot "$libdir" + libdir=$func_replace_sysroot_result if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else @@ -3982,18 +8110,18 @@ EOF *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - dep_rpath="$dep_rpath $flag" + func_append dep_rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; + *) func_append perm_rpath " $libdir" ;; esac fi done @@ -4001,20 +8129,13 @@ EOF if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" - if test -n "$hardcode_libdir_flag_spec_ld"; then - case $archive_cmds in - *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;; - *) eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;; - esac - else - eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi + eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do - rpath="$rpath$dir:" + func_append rpath "$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi @@ -4022,7 +8143,7 @@ EOF fi shlibpath="$finalize_shlibpath" - test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi @@ -4031,8 +8152,9 @@ EOF eval shared_ext=\"$shrext_cmds\" eval library_names=\"$library_names_spec\" set dummy $library_names - realname="$2" - shift; shift + shift + realname="$1" + shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" @@ -4047,83 +8169,166 @@ EOF linknames= for link do - linknames="$linknames $link" + func_append linknames " $link" done # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP` + test "X$libobjs" = "X " && libobjs= + + delfiles= + if test -n "$export_symbols" && test -n "$include_expsyms"; then + $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" + export_symbols="$output_objdir/$libname.uexp" + func_append delfiles " $export_symbols" + fi + + orig_export_symbols= + case $host_os in + cygwin* | mingw* | cegcc*) + if test -n "$export_symbols" && test -z "$export_symbols_regex"; then + # exporting using user supplied symfile + if test "x`$SED 1q $export_symbols`" != xEXPORTS; then + # and it's NOT already a .def file. Must figure out + # which of the given symbols are data symbols and tag + # them as such. So, trigger use of export_symbols_cmds. + # export_symbols gets reassigned inside the "prepare + # the list of exported symbols" if statement, so the + # include_expsyms logic still works. + orig_export_symbols="$export_symbols" + export_symbols= + always_export_symbols=yes + fi + fi + ;; + esac # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - $show "generating symbol list for \`$libname.la'" + func_verbose "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols + $opt_dry_run || $RM $export_symbols cmds=$export_symbols_cmds save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do + for cmd1 in $cmds; do IFS="$save_ifs" - eval cmd=\"$cmd\" - if len=`expr "X$cmd" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then - $show "$cmd" - $run eval "$cmd" || exit $? - skipped_export=false + # Take the normal branch if the nm_file_list_spec branch + # doesn't work or if tool conversion is not needed. + case $nm_file_list_spec~$to_tool_file_cmd in + *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*) + try_normal_branch=yes + eval cmd=\"$cmd1\" + func_len " $cmd" + len=$func_len_result + ;; + *) + try_normal_branch=no + ;; + esac + if test "$try_normal_branch" = yes \ + && { test "$len" -lt "$max_cmd_len" \ + || test "$max_cmd_len" -le -1; } + then + func_show_eval "$cmd" 'exit $?' + skipped_export=false + elif test -n "$nm_file_list_spec"; then + func_basename "$output" + output_la=$func_basename_result + save_libobjs=$libobjs + save_output=$output + output=${output_objdir}/${output_la}.nm + func_to_tool_file "$output" + libobjs=$nm_file_list_spec$func_to_tool_file_result + func_append delfiles " $output" + func_verbose "creating $NM input file list: $output" + for obj in $save_libobjs; do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > "$output" + eval cmd=\"$cmd1\" + func_show_eval "$cmd" 'exit $?' + output=$save_output + libobjs=$save_libobjs + skipped_export=false else - # The command line is too long to execute in one step. - $show "using reloadable object file for export list..." - skipped_export=: + # The command line is too long to execute in one step. + func_verbose "using reloadable object file for export list..." + skipped_export=: # Break out early, otherwise skipped_export may be # set to false by a later but shorter cmd. break fi done IFS="$save_ifs" - if test -n "$export_symbols_regex"; then - $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' + if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols fi tmp_deplibs= for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - tmp_deplibs="$tmp_deplibs $test_deplib" - ;; - esac + case " $convenience " in + *" $test_deplib "*) ;; + *) + func_append tmp_deplibs " $test_deplib" + ;; + esac done deplibs="$tmp_deplibs" if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec" && + test "$compiler_needs_object" = yes && + test -z "$libobjs"; then + # extract the archives, so we have objects to list. + # TODO: could optimize this to just extract one archive. + whole_archive_flag_spec= + fi if test -n "$whole_archive_flag_spec"; then save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= else gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" + func_append generated " $gentop" func_extract_archives $gentop $convenience - libobjs="$libobjs $func_extract_archives_result" + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= fi fi - + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" - linker_flags="$linker_flags $flag" + func_append linker_flags " $flag" fi # Make a backup of the uninstalled library when relinking - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? fi # Do each of the archive commands. @@ -4136,22 +8341,24 @@ EOF cmds=$module_cmds fi else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + eval test_cmds=\"$archive_expsym_cmds\" + cmds=$archive_expsym_cmds + else + eval test_cmds=\"$archive_cmds\" + cmds=$archive_cmds fi fi if test "X$skipped_export" != "X:" && - len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + func_len " $test_cmds" && + len=$func_len_result && + test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then : else - # The command line is too long to link in one step, link piecewise. - $echo "creating reloadable object files..." + # The command line is too long to link in one step, link piecewise + # or, if using GNU ld and skipped_export is not :, use a linker + # script. # Save the value of $output and $libobjs because we want to # use them later. If we have whole_archive_flag_spec, we @@ -4165,77 +8372,171 @@ EOF save_libobjs=$libobjs fi save_output=$output - output_la=`$echo "X$output" | $Xsed -e "$basename"` + func_basename "$output" + output_la=$func_basename_result # Clear the reloadable object creation command queue and # initialize k to one. test_cmds= concat_cmds= objlist= - delfiles= last_robj= k=1 - output=$output_objdir/$output_la-${k}.$objext - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - eval test_cmds=\"$reload_cmds $objlist $last_robj\" - if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len"; }; then - objlist="$objlist $obj" + + if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then + output=${output_objdir}/${output_la}.lnkscript + func_verbose "creating GNU ld script: $output" + echo 'INPUT (' > $output + for obj in $save_libobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + echo ')' >> $output + func_append delfiles " $output" + func_to_tool_file "$output" + output=$func_to_tool_file_result + elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then + output=${output_objdir}/${output_la}.lnk + func_verbose "creating linker input file list: $output" + : > $output + set x $save_libobjs + shift + firstobj= + if test "$compiler_needs_object" = yes; then + firstobj="$1 " + shift + fi + for obj + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" >> $output + done + func_append delfiles " $output" + func_to_tool_file "$output" + output=$firstobj\"$file_list_spec$func_to_tool_file_result\" + else + if test -n "$save_libobjs"; then + func_verbose "creating reloadable object files..." + output=$output_objdir/$output_la-${k}.$objext + eval test_cmds=\"$reload_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 + + # Loop over the list of objects to be linked. + for obj in $save_libobjs + do + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + if test "X$objlist" = X || + test "$len" -lt "$max_cmd_len"; then + func_append objlist " $obj" + else + # The command $test_cmds is almost too long, add a + # command to the queue. + if test "$k" -eq 1 ; then + # The first file doesn't have a previous command to add. + reload_objs=$objlist + eval concat_cmds=\"$reload_cmds\" + else + # All subsequent reloadable object files will link in + # the last one created. + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\" + fi + last_robj=$output_objdir/$output_la-${k}.$objext + func_arith $k + 1 + k=$func_arith_result + output=$output_objdir/$output_la-${k}.$objext + objlist=" $obj" + func_len " $last_robj" + func_arith $len0 + $func_len_result + len=$func_arith_result + fi + done + # Handle the remaining objects by creating one last + # reloadable object file. All subsequent reloadable object + # files will link in the last one created. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + reload_objs="$objlist $last_robj" + eval concat_cmds=\"\${concat_cmds}$reload_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" + fi + func_append delfiles " $output" + else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + output= + fi + + if ${skipped_export-false}; then + func_verbose "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $opt_dry_run || $RM $export_symbols + libobjs=$output + # Append the command to create the export file. + test -z "$concat_cmds" || concat_cmds=$concat_cmds~ + eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" + if test -n "$last_robj"; then + eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" fi - last_robj=$output_objdir/$output_la-${k}.$objext - k=`expr $k + 1` - output=$output_objdir/$output_la-${k}.$objext - objlist=$obj - len=1 fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" - - if ${skipped_export-false}; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - libobjs=$output - # Append the command to create the export file. - eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" - fi - # Set up a command to remove the reloadable object files - # after they are used. - i=0 - while test "$i" -lt "$k" - do - i=`expr $i + 1` - delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" - done + test -n "$save_libobjs" && + func_verbose "creating a temporary reloadable object file: $output" - $echo "creating a temporary reloadable object file: $output" + # Loop through the commands generated above and execute them. + save_ifs="$IFS"; IFS='~' + for cmd in $concat_cmds; do + IFS="$save_ifs" + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { + lt_exit=$? + + # Restore the uninstalled library and exit + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) + fi - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do + exit $lt_exit + } + done IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + + if test -n "$export_symbols_regex" && ${skipped_export-false}; then + func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + func_show_eval '$MV "${export_symbols}T" "$export_symbols"' + fi + fi + + if ${skipped_export-false}; then + if test -n "$export_symbols" && test -n "$include_expsyms"; then + tmp_export_symbols="$export_symbols" + test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" + $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"' + fi + + if test -n "$orig_export_symbols"; then + # The given exports_symbols file has to be filtered, so filter it. + func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" + # FIXME: $output_objdir/$libname.filter potentially contains lots of + # 's' commands which not all seds can handle. GNU sed should be fine + # though. Also, the filter scales superlinearly with the number of + # global variables. join(1) would be nice here, but unfortunately + # isn't a blessed tool. + $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter + func_append delfiles " $export_symbols $output_objdir/$libname.filter" + export_symbols=$output_objdir/$libname.def + $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols + fi + fi libobjs=$output # Restore the value of output. @@ -4243,6 +8544,7 @@ EOF if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + test "X$libobjs" = "X " && libobjs= fi # Expand the library linking commands again to reset the # value of $libobjs for piecewise linking. @@ -4255,28 +8557,45 @@ EOF cmds=$module_cmds fi else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then + cmds=$archive_expsym_cmds + else + cmds=$archive_cmds fi fi + fi - # Append the command to remove the reloadable object files - # to the just-reset $cmds. - eval cmds=\"\$cmds~\$rm $delfiles\" + if test -n "$delfiles"; then + # Append the command to remove temporary files to $cmds. + eval cmds=\"\$cmds~\$RM $delfiles\" fi + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append libobjs " $func_extract_archives_result" + test "X$libobjs" = "X " && libobjs= + fi + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || { + $opt_silent || { + func_quote_for_expand "$cmd" + eval "func_echo $func_quote_for_expand_result" + } + $opt_dry_run || eval "$cmd" || { lt_exit=$? # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' + if test "$opt_mode" = relink; then + ( cd "$output_objdir" && \ + $RM "${realname}T" && \ + $MV "${realname}U" "$realname" ) fi exit $lt_exit @@ -4285,13 +8604,12 @@ EOF IFS="$save_ifs" # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + if test "$opt_mode" = relink; then + $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? if test -n "$convenience"; then if test -z "$whole_archive_flag_spec"; then - $show "${rm}r $gentop" - $run ${rm}r "$gentop" + func_show_eval '${RM}r "$gentop"' fi fi @@ -4301,8 +8619,7 @@ EOF # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? + func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' fi done @@ -4315,39 +8632,35 @@ EOF ;; obj) + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + func_warning "\`-dlopen' is ignored for objects" + fi + case " $deplibs" in *\ -l* | *\ -L*) - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;; + func_warning "\`-l' and \`-L' are ignored for objects" ;; esac - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 - fi + test -n "$rpath" && \ + func_warning "\`-rpath' is ignored for objects" - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi + test -n "$xrpath" && \ + func_warning "\`-R' is ignored for objects" - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for objects" - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi + test -n "$release" && \ + func_warning "\`-release' is ignored for objects" case $output in *.lo) - if test -n "$objs$old_deplibs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit $EXIT_FAILURE - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` + test -n "$objs$old_deplibs" && \ + func_fatal_error "cannot build library object \`$output' from non-libtool objects" + + libobj=$output + func_lo2o "$libobj" + obj=$func_lo2o_result ;; *) libobj= @@ -4356,7 +8669,7 @@ EOF esac # Delete the old objects. - $run $rm $obj $libobj + $opt_dry_run || $RM $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create @@ -4372,35 +8685,29 @@ EOF if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` + reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'` else gentop="$output_objdir/${obj}x" - generated="$generated $gentop" + func_append generated " $gentop" func_extract_archives $gentop $convenience reload_conv_objs="$reload_objs $func_extract_archives_result" fi fi + # If we're not building shared, we need to use non_pic_objs + test "$build_libtool_libs" != yes && libobjs="$non_pic_objects" + # Create the old-style object. - reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" - cmds=$reload_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_execute_cmds "$reload_cmds" 'exit $?' # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop + func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS @@ -4408,14 +8715,13 @@ EOF if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop + func_show_eval '${RM}r "$gentop"' fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. # $show "echo timestamp > $libobj" - # $run eval "echo timestamp > $libobj" || exit $? + # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? exit $EXIT_SUCCESS fi @@ -4423,20 +8729,11 @@ EOF # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" - cmds=$reload_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_execute_cmds "$reload_cmds" 'exit $?' fi if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop + func_show_eval '${RM}r "$gentop"' fi exit $EXIT_SUCCESS @@ -4444,39 +8741,45 @@ EOF prog) case $host in - *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + *cygwin*) func_stripname '' '.exe' "$output" + output=$func_stripname_result.exe;; esac - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi + test -n "$vinfo" && \ + func_warning "\`-version-info' is ignored for programs" - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi + test -n "$release" && \ + func_warning "\`-release' is ignored for programs" - if test "$preload" = yes; then - if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi - fi + test "$preload" = yes \ + && test "$dlopen_support" = unknown \ + && test "$dlopen_self" = unknown \ + && test "$dlopen_self_static" = unknown && \ + func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework - compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` - finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'` ;; esac case $host in - *darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - if test "$tagname" = CXX ; then - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - fi - ;; + *-*-darwin*) + # Don't allow lazy linking, it breaks C++ global constructors + # But is supposedly fixed on 10.4 or later (yay!). + if test "$tagname" = CXX ; then + case ${MACOSX_DEPLOYMENT_TARGET-10.0} in + 10.[0123]) + func_append compile_command " ${wl}-bind_at_load" + func_append finalize_command " ${wl}-bind_at_load" + ;; + esac + fi + # Time to change all our "foo.ltframework" stuff back to "-framework foo" + compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'` + ;; esac @@ -4489,7 +8792,7 @@ EOF *) case " $compile_deplibs " in *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; + func_append new_libs " -L$path/$objdir" ;; esac ;; esac @@ -4499,17 +8802,17 @@ EOF -L*) case " $new_libs " in *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; + *) func_append new_libs " $deplib" ;; esac ;; - *) new_libs="$new_libs $deplib" ;; + *) func_append new_libs " $deplib" ;; esac done compile_deplibs="$new_libs" - compile_command="$compile_command $compile_deplibs" - finalize_command="$finalize_command $finalize_deplibs" + func_append compile_command " $compile_deplibs" + func_append finalize_command " $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. @@ -4517,7 +8820,7 @@ EOF # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; + *) func_append finalize_rpath " $libdir" ;; esac done fi @@ -4536,30 +8839,32 @@ EOF *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" + func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; + *) func_append perm_rpath " $libdir" ;; esac fi case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) - testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) + testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` case :$dllsearchpath: in *":$libdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$libdir";; + ::) dllsearchpath=$libdir;; + *) func_append dllsearchpath ":$libdir";; esac case :$dllsearchpath: in *":$testbindir:"*) ;; - *) dllsearchpath="$dllsearchpath:$testbindir";; + ::) dllsearchpath=$testbindir;; + *) func_append dllsearchpath ":$testbindir";; esac ;; esac @@ -4585,18 +8890,18 @@ EOF *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + func_append hardcode_libdirs "$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" + func_append rpath " $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; + *) func_append finalize_perm_rpath " $libdir" ;; esac fi done @@ -4610,284 +8915,57 @@ EOF if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP` + finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP` fi - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi - fi - - if test -n "$dlsyms"; then - case $dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${outputname}.nm" - - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" - - # Parse the name list into a source file. - $show "creating $output_objdir/$dlsyms" - - test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" - $run $rm $export_symbols - $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* ) - $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - else - $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - case $host in - *cygwin* | *mingw* ) - $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` - $run eval '$echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | - if sort -k 3 </dev/null >/dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - $echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi - - $echo >> "$output_objdir/$dlsyms" "\ - -#undef lt_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define lt_ptr void * -#else -# define lt_ptr char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -" - - case $host in - *cygwin* | *mingw* ) - $echo >> "$output_objdir/$dlsyms" "\ -/* DATA imports from DLLs on WIN32 can't be const, because - runtime relocations are performed -- see ld's documentation - on pseudo-relocs */ -struct { -" - ;; - * ) - $echo >> "$output_objdir/$dlsyms" "\ -const struct { -" - ;; - esac - - - $echo >> "$output_objdir/$dlsyms" "\ - const char *name; - lt_ptr address; -} -lt_preloaded_symbols[] = -{\ -" - - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - fi - - pic_flag_for_symtable= - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; - esac;; - *-*-hpux*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag";; - esac - esac - - # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Clean up the generated files. - $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" - $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - # Transform the symbol file into the correct name. - case $host in - *cygwin* | *mingw* ) - if test -f "$output_objdir/${outputname}.def" ; then - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP` - else - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - fi - ;; - * ) - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP` - ;; - esac - ;; - *-*-freebsd*) - # FreeBSD doesn't need this... - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit $EXIT_FAILURE - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP` + # template prelinking step + if test -n "$prelink_cmds"; then + func_execute_cmds "$prelink_cmds" 'exit $?' fi - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=yes + case $host in + *cegcc* | *mingw32ce*) + # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway. + wrappers_required=no + ;; + *cygwin* | *mingw* ) + if test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + *) + if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + wrappers_required=no + fi + ;; + esac + if test "$wrappers_required" = no; then # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP` + compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - exit_status=$? + exit_status=0 + func_show_eval "$link_command" 'exit_status=$?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi # Delete the generated files. - if test -n "$dlsyms"; then - $show "$rm $output_objdir/${outputname}S.${objext}" - $run $rm "$output_objdir/${outputname}S.${objext}" + if test -f "$output_objdir/${outputname}S.${objext}"; then + func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' fi exit $exit_status fi - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" - fi - if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi @@ -4902,7 +8980,7 @@ static const void *lt_preloaded_setup() { # We should set the runpath_var. rpath= for dir in $perm_rpath; do - rpath="$rpath$dir:" + func_append rpath "$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi @@ -4910,7 +8988,7 @@ static const void *lt_preloaded_setup() { # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" + func_append rpath "$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi @@ -4920,12 +8998,18 @@ static const void *lt_preloaded_setup() { # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. - $run $rm $output + $opt_dry_run || $RM $output # Link the executable and exit - $show "$link_command" - $run eval "$link_command" || exit $? + func_show_eval "$link_command" 'exit $?' + + if test -n "$postlink_cmds"; then + func_to_tool_file "$output" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi + exit $EXIT_SUCCESS fi @@ -4934,13 +9018,13 @@ static const void *lt_preloaded_setup() { link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 + func_warning "this platform does not like uninstalled shared libraries" + func_warning "\`$output' will be relinked during installation" else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP` + relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= @@ -4952,608 +9036,98 @@ static const void *lt_preloaded_setup() { fi # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` + link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname + $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname + + func_show_eval "$link_command" 'exit $?' - $show "$link_command" - $run eval "$link_command" || exit $? + if test -n "$postlink_cmds"; then + func_to_tool_file "$output_objdir/$outputname" + postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'` + func_execute_cmds "$postlink_cmds" 'exit $?' + fi # Now create the wrapper script. - $show "creating $output" + func_verbose "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" - relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` - fi - - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then - case $progpath in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; - *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; - esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` fi - # Only actually do things if our run command is non-null. - if test -z "$run"; then + # Only actually do things if not in dry run mode. + $opt_dry_run || { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in - *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; + *.exe) func_stripname '' '.exe' "$output" + output=$func_stripname_result ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe - outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; + func_stripname '' '.exe' "$outputname" + outputname=$func_stripname_result ;; *) exeext= ;; esac case $host in *cygwin* | *mingw* ) - output_name=`basename $output` - output_path=`dirname $output` - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" - $rm $cwrappersource $cwrapper - trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - cat > $cwrappersource <<EOF - -/* $cwrappersource - temporary wrapper executable for $objdir/$outputname - Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP - - The $output program cannot be directly executed until all the libtool - libraries that it depends on are installed. - - This wrapper executable should never be moved out of the build directory. - If it is, it will not operate correctly. - - Currently, it simply execs the wrapper *script* "/bin/sh $output", - but could eventually absorb all of the scripts functionality and - exec $objdir/$outputname directly. -*/ -EOF - cat >> $cwrappersource<<"EOF" -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <malloc.h> -#include <stdarg.h> -#include <assert.h> -#include <string.h> -#include <ctype.h> -#include <sys/stat.h> - -#if defined(PATH_MAX) -# define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif - -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) -# define HAVE_DOS_BASED_FILE_SYSTEM -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ -} while (0) - -/* -DDEBUG is fairly common in CFLAGS. */ -#undef DEBUG -#if defined DEBUGWRAPPER -# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) -#else -# define DEBUG(format, ...) -#endif - -const char *program_name = NULL; - -void * xmalloc (size_t num); -char * xstrdup (const char *string); -const char * base_name (const char *name); -char * find_executable(const char *wrapper); -int check_executable(const char *path); -char * strendzap(char *str, const char *pat); -void lt_fatal (const char *message, ...); - -int -main (int argc, char *argv[]) -{ - char **newargz; - int i; - - program_name = (char *) xstrdup (base_name (argv[0])); - DEBUG("(main) argv[0] : %s\n",argv[0]); - DEBUG("(main) program_name : %s\n",program_name); - newargz = XMALLOC(char *, argc+2); -EOF - - cat >> $cwrappersource <<EOF - newargz[0] = (char *) xstrdup("$SHELL"); -EOF - - cat >> $cwrappersource <<"EOF" - newargz[1] = find_executable(argv[0]); - if (newargz[1] == NULL) - lt_fatal("Couldn't find %s", argv[0]); - DEBUG("(main) found exe at : %s\n",newargz[1]); - /* we know the script has the same name, without the .exe */ - /* so make sure newargz[1] doesn't end in .exe */ - strendzap(newargz[1],".exe"); - for (i = 1; i < argc; i++) - newargz[i+1] = xstrdup(argv[i]); - newargz[argc+1] = NULL; - - for (i=0; i<argc+1; i++) - { - DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]); - ; - } - -EOF - - case $host_os in - mingw*) - cat >> $cwrappersource <<EOF - execv("$SHELL",(char const **)newargz); -EOF - ;; - *) - cat >> $cwrappersource <<EOF - execv("$SHELL",newargz); -EOF - ;; - esac - - cat >> $cwrappersource <<"EOF" - return 127; -} - -void * -xmalloc (size_t num) -{ - void * p = (void *) malloc (num); - if (!p) - lt_fatal ("Memory exhausted"); - - return p; -} - -char * -xstrdup (const char *string) -{ - return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL -; -} - -const char * -base_name (const char *name) -{ - const char *base; - -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - /* Skip over the disk name in MSDOS pathnames. */ - if (isalpha ((unsigned char)name[0]) && name[1] == ':') - name += 2; -#endif - - for (base = name; *name; name++) - if (IS_DIR_SEPARATOR (*name)) - base = name + 1; - return base; -} - -int -check_executable(const char * path) -{ - struct stat st; - - DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); - if ((!path) || (!*path)) - return 0; - - if ((stat (path, &st) >= 0) && - ( - /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ -#if defined (S_IXOTH) - ((st.st_mode & S_IXOTH) == S_IXOTH) || -#endif -#if defined (S_IXGRP) - ((st.st_mode & S_IXGRP) == S_IXGRP) || -#endif - ((st.st_mode & S_IXUSR) == S_IXUSR)) - ) - return 1; - else - return 0; -} - -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise */ -char * -find_executable (const char* wrapper) -{ - int has_slash = 0; - const char* p; - const char* p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - int tmp_len; - char* concat_name; - - DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; - - /* Absolute path? */ -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - } -#endif - - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char* path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char* q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR(*q)) - break; - p_len = q - p; - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen(tmp); - concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen(tmp); - concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - - if (check_executable(concat_name)) - return concat_name; - XFREE(concat_name); - return NULL; -} - -char * -strendzap(char *str, const char *pat) -{ - size_t len, patlen; - - assert(str != NULL); - assert(pat != NULL); - - len = strlen(str); - patlen = strlen(pat); - - if (patlen <= len) - { - str += len - patlen; - if (strcmp(str, pat) == 0) - *str = '\0'; - } - return str; -} - -static void -lt_error_core (int exit_status, const char * mode, - const char * message, va_list ap) -{ - fprintf (stderr, "%s: %s: ", program_name, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); - va_end (ap); -} -EOF - # we should really use a build-platform specific compiler - # here, but OTOH, the wrappers (shell script and this C one) - # are only useful if you want to execute the "real" binary. - # Since the "real" binary is built for $host, then this - # wrapper might as well be built for $host, too. - $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource - ;; - esac - $rm $output - trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 - - $echo > $output "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE). -if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : - else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $echo >> $output "\ - - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - $echo >> $output "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" - - $echo >> $output "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $echo \"\$relink_command_output\" >&2 - $rm \"\$progdir/\$file\" - exit $EXIT_FAILURE - fi - fi - - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" - else - $echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - $echo >> $output "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi + func_dirname_and_basename "$output" "" "." + output_name=$func_basename_result + output_path=$func_dirname_result + cwrappersource="$output_path/$objdir/lt-$output_name.c" + cwrapper="$output_path/$output_name.exe" + $RM $cwrappersource $cwrapper + trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 + + func_emit_cwrapperexe_src > $cwrappersource + + # The wrapper executable is built using the $host compiler, + # because it contains $host paths and files. If cross- + # compiling, it, like the target executable, must be + # executed on the $host or under an emulation environment. + $opt_dry_run || { + $LTCC $LTCFLAGS -o $cwrapper $cwrappersource + $STRIP $cwrapper + } - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2*) - $echo >> $output "\ - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" + # Now, create the wrapper script for func_source use: + func_ltwrapper_scriptname $cwrapper + $RM $func_ltwrapper_scriptname_result + trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 + $opt_dry_run || { + # note: this script will not be executed, so do not chmod. + if test "x$build" = "x$host" ; then + $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result + else + func_emit_wrapper no > $func_ltwrapper_scriptname_result + fi + } ;; + * ) + $RM $output + trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - *) - $echo >> $output "\ - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" + func_emit_wrapper no > $output + chmod +x $output ;; esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \$*\" - exit $EXIT_FAILURE - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - $echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit $EXIT_FAILURE - fi -fi\ -" - chmod +x $output - fi + } exit $EXIT_SUCCESS ;; esac @@ -5562,7 +9136,7 @@ fi\ for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" + oldobjs="$libobjs_save $symfileobj" addlibs="$convenience" build_libtool_libs=no else @@ -5571,22 +9145,35 @@ fi\ build_libtool_libs=no else oldobjs="$old_deplibs $non_pic_objects" + if test "$preload" = yes && test -f "$symfileobj"; then + func_append oldobjs " $symfileobj" + fi fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" + func_append generated " $gentop" func_extract_archives $gentop $addlibs - oldobjs="$oldobjs $func_extract_archives_result" + func_append oldobjs " $func_extract_archives_result" fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - cmds=$old_archive_from_new_cmds + cmds=$old_archive_from_new_cmds else + + # Add any objects from preloaded convenience libraries + if test -n "$dlprefiles"; then + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + + func_extract_archives $gentop $dlprefiles + func_append oldobjs " $func_extract_archives_result" + fi + # POSIX demands no paths to be encoded in archives. We have # to avoid creating archives with duplicate basenames if we # might have to extract them afterwards, e.g., when creating a @@ -5595,32 +9182,22 @@ fi\ # not supported by libtool). if (for obj in $oldobjs do - $echo "X$obj" | $Xsed -e 's%^.*/%%' + func_basename "$obj" + $ECHO "$func_basename_result" done | sort | sort -uc >/dev/null 2>&1); then : else - $echo "copying selected object files to avoid basename conflicts..." - - if test -z "$gentop"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" - exit_status=$? - if test "$exit_status" -ne 0 && test ! -d "$gentop"; then - exit $exit_status - fi - fi - + echo "copying selected object files to avoid basename conflicts..." + gentop="$output_objdir/${outputname}x" + func_append generated " $gentop" + func_mkdir_p "$gentop" save_oldobjs=$oldobjs oldobjs= counter=1 for obj in $save_oldobjs do - objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + func_basename "$obj" + objbase="$func_basename_result" case " $oldobjs " in " ") oldobjs=$obj ;; *[\ /]"$objbase "*) @@ -5628,58 +9205,74 @@ fi\ # Make sure we don't pick an alternate name that also # overlaps. newobj=lt$counter-$objbase - counter=`expr $counter + 1` + func_arith $counter + 1 + counter=$func_arith_result case " $oldobjs " in *[\ /]"$newobj "*) ;; *) if test ! -f "$gentop/$newobj"; then break; fi ;; esac done - $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - $run ln "$obj" "$gentop/$newobj" || - $run cp "$obj" "$gentop/$newobj" - oldobjs="$oldobjs $gentop/$newobj" + func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" + func_append oldobjs " $gentop/$newobj" ;; - *) oldobjs="$oldobjs $obj" ;; + *) func_append oldobjs " $obj" ;; esac done fi - + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result eval cmds=\"$old_archive_cmds\" - if len=`expr "X$cmds" : ".*"` && - test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then + func_len " $cmds" + len=$func_len_result + if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then + cmds=$old_archive_cmds + elif test -n "$archiver_list_spec"; then + func_verbose "using command file archive linking..." + for obj in $oldobjs + do + func_to_tool_file "$obj" + $ECHO "$func_to_tool_file_result" + done > $output_objdir/$libname.libcmd + func_to_tool_file "$output_objdir/$libname.libcmd" + oldobjs=" $archiver_list_spec$func_to_tool_file_result" cmds=$old_archive_cmds else # the command line is too long to link in one step, link in parts - $echo "using piecewise archive linking..." + func_verbose "using piecewise archive linking..." save_RANLIB=$RANLIB RANLIB=: objlist= concat_cmds= save_oldobjs=$oldobjs - + oldobjs= # Is there a better way of finding the last object in the list? for obj in $save_oldobjs do last_oldobj=$obj done + eval test_cmds=\"$old_archive_cmds\" + func_len " $test_cmds" + len0=$func_len_result + len=$len0 for obj in $save_oldobjs do - oldobjs="$objlist $obj" - objlist="$objlist $obj" - eval test_cmds=\"$old_archive_cmds\" - if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && - test "$len" -le "$max_cmd_len"; then + func_len " $obj" + func_arith $len + $func_len_result + len=$func_arith_result + func_append objlist " $obj" + if test "$len" -lt "$max_cmd_len"; then : else # the above command should be used before it gets too long oldobjs=$objlist if test "$obj" = "$last_oldobj" ; then - RANLIB=$save_RANLIB + RANLIB=$save_RANLIB fi test -z "$concat_cmds" || concat_cmds=$concat_cmds~ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" objlist= + len=$len0 fi done RANLIB=$save_RANLIB @@ -5691,49 +9284,39 @@ fi\ fi fi fi - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - eval cmd=\"$cmd\" - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + func_execute_cmds "$cmds" 'exit $?' done - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi + test -n "$generated" && \ + func_show_eval "${RM}r$generated" # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" + func_verbose "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` - relink_command="$var=\"$var_value\"; export $var; $relink_command" + func_quote_for_eval "$var_value" + relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP` + relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` if test "$hardcode_automatic" = yes ; then relink_command= fi - # Only create the output if not a dry run. - if test -z "$run"; then + $opt_dry_run || { for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then @@ -5745,38 +9328,60 @@ fi\ for deplib in $dependency_libs; do case $deplib in *.la) - name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - if test -z "$libdir"; then - $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - newdependency_libs="$newdependency_libs $libdir/$name" + func_basename "$deplib" + name="$func_basename_result" + func_resolve_sysroot "$deplib" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` + test -z "$libdir" && \ + func_fatal_error "\`$deplib' is not a valid libtool archive" + func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" + ;; + -L*) + func_stripname -L '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -L$func_replace_sysroot_result" ;; - *) newdependency_libs="$newdependency_libs $deplib" ;; + -R*) + func_stripname -R '' "$deplib" + func_replace_sysroot "$func_stripname_result" + func_append newdependency_libs " -R$func_replace_sysroot_result" + ;; + *) func_append newdependency_libs " $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= + for lib in $dlfiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - newdlfiles="$newdlfiles $libdir/$name" + case $lib in + *.la) + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name" + ;; + *) func_append newdlfiles " $lib" ;; + esac done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do - name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - if test -z "$libdir"; then - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - exit $EXIT_FAILURE - fi - newdlprefiles="$newdlprefiles $libdir/$name" + case $lib in + *.la) + # Only pass preopened files to the pseudo-archive (for + # eventual linking with the app. that links it) if we + # didn't already link the preopened objects directly into + # the library: + func_basename "$lib" + name="$func_basename_result" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + test -z "$libdir" && \ + func_fatal_error "\`$lib' is not a valid libtool archive" + func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name" + ;; + esac done dlprefiles="$newdlprefiles" else @@ -5786,7 +9391,7 @@ fi\ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac - newdlfiles="$newdlfiles $abs" + func_append newdlfiles " $abs" done dlfiles="$newdlfiles" newdlprefiles= @@ -5795,19 +9400,37 @@ fi\ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; *) abs=`pwd`"/$lib" ;; esac - newdlprefiles="$newdlprefiles $abs" + func_append newdlprefiles " $abs" done dlprefiles="$newdlprefiles" fi - $rm $output + $RM $output # place dlname in correct position for cygwin + # In fact, it would be nice if we could use this code for all target + # systems that can't hard-code library paths into their executables + # and that have no shared library path variable independent of PATH, + # but it turns out we can't easily determine that from inspecting + # libtool variables, so we have to hard-code the OSs to which it + # applies here; at the moment, that means platforms that use the PE + # object format with DLL files. See the long comment at the top of + # tests/bindir.at for full details. tdlname=$dlname case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) + # If a -bindir argument was supplied, place the dll there. + if test "x$bindir" != x ; + then + func_relative_path "$install_libdir" "$bindir" + tdlname=$func_relative_path_result$dlname + else + # Otherwise fall back on heuristic. + tdlname=../bin/$dlname + fi + ;; esac - $echo > $output "\ + $ECHO > $output "\ # $outputname - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP +# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION # # Please DO NOT delete this file! # It is necessary for linking the library. @@ -5821,9 +9444,15 @@ library_names='$library_names' # The name of the static archive. old_library='$old_library' +# Linker flags that can not go in dependency_libs. +inherited_linker_flags='$new_inherited_linker_flags' + # Libraries that this one depends upon. dependency_libs='$dependency_libs' +# Names of additional weak libraries provided by this library +weak_library_names='$weak_libs' + # Version information for $libname. current=$current age=$age @@ -5842,748 +9471,29 @@ dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then - $echo >> $output "\ + $ECHO >> $output "\ relink_command=\"$relink_command\"" fi done - fi + } # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' ;; esac exit $EXIT_SUCCESS - ;; - - # libtool install mode - install) - modename="$modename: install" - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $echo "X$nonopt" | grep shtool > /dev/null; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg=$nonopt - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest=$arg - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) - case " $install_prog " in - *[\\\ /]cp\ *) ;; - *) prev=$arg ;; - esac - ;; - -g | -m | -o) prev=$arg ;; - -s) - stripme=" -s" - continue - ;; - -*) - ;; - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest=$arg - continue - fi - ;; - esac - - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case $arg in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done - - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 - fi - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test "$#" -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - library_names= - old_library= - relink_command= - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - if test "$inst_prefix_dir" = "$destdir"; then - $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 - exit $EXIT_FAILURE - fi - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP` - else - relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP` - fi - - $echo "$modename: warning: relinking \`$file'" 1>&2 - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - exit $EXIT_FAILURE - fi - fi - - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$srcname $destdir/$realname" - $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? - if test -n "$stripme" && test -n "$striplib"; then - $show "$striplib $destdir/$realname" - $run eval "$striplib $destdir/$realname" || exit $? - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - if test "$linkname" != "$realname"; then - $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" - $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" - fi - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - cmds=$postinstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - fi - - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? - fi - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi - exit $EXIT_SUCCESS - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext="" - case $file in - *.exe) - if test ! -f "$file"; then - file=`$echo $file|${SED} 's,.exe$,,'` - stripped_ext=".exe" - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin*|*mingw*) - wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` - ;; - *) - wrapper=$file - ;; - esac - if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then - notinst_deplibs= - relink_command= - - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # - # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; - esac - - # Check the variables that should have been set. - if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 - exit $EXIT_FAILURE - fi - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case $lib in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done - - relink_command= - # Note that it is not necessary on cygwin/mingw to append a dot to - # foo even if both foo and FILE.exe exist: automatic-append-.exe - # behavior happens only for exec(3), not for open(2)! Also, sourcing - # `FILE.' does not work on cygwin managed mounts. - # - # If there is no directory component, then add one. - case $wrapper in - */* | *\\*) . ${wrapper} ;; - *) . ./${wrapper} ;; - esac - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes && test -z "$run"; then - tmpdir=`func_mktempdir` - file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP` - - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - ${rm}r "$tmpdir" - continue - fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file'" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` - ;; - esac - ;; - esac - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && ${rm}r "$tmpdir" - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? - - if test -n "$stripme" && test -n "$old_striplib"; then - $show "$old_striplib $oldlib" - $run eval "$old_striplib $oldlib" || exit $? - fi - - # Do each command in the postinstall commands. - cmds=$old_postinstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi - ;; - - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - cmds=$finish_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" - done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - test "$show" = : && exit $EXIT_SUCCESS - - $echo "X----------------------------------------------------------------------" | $Xsed - $echo "Libraries have been installed in:" - for libdir in $libdirs; do - $echo " $libdir" - done - $echo - $echo "If you ever happen to want to link against installed libraries" - $echo "in a given directory, LIBDIR, you must either use libtool, and" - $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" - $echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - $echo " during execution" - fi - if test -n "$runpath_var"; then - $echo " - add LIBDIR to the \`$runpath_var' environment variable" - $echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - $echo - $echo "See any operating system documentation about shared libraries for" - $echo "more information, such as the ld(1) and ld.so(8) manual pages." - $echo "X----------------------------------------------------------------------" | $Xsed - exit $EXIT_SUCCESS - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit $EXIT_FAILURE - fi - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Read the libtool library. - dlname= - library_names= - - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - if test ! -f "$dir/$dlname"; then - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit $EXIT_FAILURE - fi - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; - - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done +} - if test -z "$run"; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi +{ test "$opt_mode" = link || test "$opt_mode" = relink; } && + func_mode_link ${1+"$@"} - # Restore saved environment variables - for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES - do - eval "if test \"\${save_$lt_var+set}\" = set; then - $lt_var=\$save_$lt_var; export $lt_var - fi" - done - - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - fi - $echo "$cmd$args" - exit $EXIT_SUCCESS - fi - ;; - # libtool clean and uninstall mode - clean | uninstall) - modename="$modename: $mode" - rm="$nonopt" +# func_mode_uninstall arg... +func_mode_uninstall () +{ + $opt_debug + RM="$nonopt" files= rmforce= exit_status=0 @@ -6595,44 +9505,41 @@ relink_command=\"$relink_command\"" for arg do case $arg in - -f) rm="$rm $arg"; rmforce=yes ;; - -*) rm="$rm $arg" ;; - *) files="$files $arg" ;; + -f) func_append RM " $arg"; rmforce=yes ;; + -*) func_append RM " $arg" ;; + *) func_append files " $arg" ;; esac done - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - fi + test -z "$RM" && \ + func_fatal_help "you must specify an RM program" rmdirs= - origobjdir="$objdir" for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$file"; then - dir=. - objdir="$origobjdir" + func_dirname "$file" "" "." + dir="$func_dirname_result" + if test "X$dir" = X.; then + odir="$objdir" else - objdir="$dir/$origobjdir" + odir="$dir/$objdir" fi - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - test "$mode" = uninstall && objdir="$dir" + func_basename "$file" + name="$func_basename_result" + test "$opt_mode" = uninstall && odir="$dir" - # Remember objdir for removal later, being careful to avoid duplicates - if test "$mode" = clean; then + # Remember odir for removal later, being careful to avoid duplicates + if test "$opt_mode" = clean; then case " $rmdirs " in - *" $objdir "*) ;; - *) rmdirs="$rmdirs $objdir" ;; + *" $odir "*) ;; + *) func_append rmdirs " $odir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. - if (test -L "$file") >/dev/null 2>&1 \ - || (test -h "$file") >/dev/null 2>&1 \ - || test -f "$file"; then + if { test -L "$file"; } >/dev/null 2>&1 || + { test -h "$file"; } >/dev/null 2>&1 || + test -f "$file"; then : elif test -d "$file"; then exit_status=1 @@ -6646,55 +9553,32 @@ relink_command=\"$relink_command\"" case $name in *.la) # Possibly a libtool archive, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name + if func_lalib_p "$file"; then + func_source $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do - rmfiles="$rmfiles $objdir/$n" + func_append rmfiles " $odir/$n" done - test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + test -n "$old_library" && func_append rmfiles " $odir/$old_library" - case "$mode" in + case "$opt_mode" in clean) - case " $library_names " in - # " " in the beginning catches empty $dlname + case " $library_names " in *" $dlname "*) ;; - *) rmfiles="$rmfiles $objdir/$dlname" ;; + *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;; esac - test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i" ;; uninstall) if test -n "$library_names"; then # Do each command in the postuninstall commands. - cmds=$postuninstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" + func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. - cmds=$old_postuninstall_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $show "$cmd" - $run eval "$cmd" - if test "$?" -ne 0 && test "$rmforce" != yes; then - exit_status=1 - fi - done - IFS="$save_ifs" + func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' fi # FIXME: should reinstall the best remaining shared library. ;; @@ -6704,288 +9588,95 @@ relink_command=\"$relink_command\"" *.lo) # Possibly a libtool object, so verify it. - if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if func_lalib_p "$file"; then # Read the .lo file - . $dir/$name + func_source $dir/$name # Add PIC object to the list of files to remove. - if test -n "$pic_object" \ - && test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" + if test -n "$pic_object" && + test "$pic_object" != none; then + func_append rmfiles " $dir/$pic_object" fi # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" \ - && test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" + if test -n "$non_pic_object" && + test "$non_pic_object" != none; then + func_append rmfiles " $dir/$non_pic_object" fi fi ;; *) - if test "$mode" = clean ; then + if test "$opt_mode" = clean ; then noexename=$name case $file in *.exe) - file=`$echo $file|${SED} 's,.exe$,,'` - noexename=`$echo $name|${SED} 's,.exe$,,'` + func_stripname '' '.exe' "$file" + file=$func_stripname_result + func_stripname '' '.exe' "$name" + noexename=$func_stripname_result # $file with .exe has already been added to rmfiles, # add $file without .exe - rmfiles="$rmfiles $file" + func_append rmfiles " $file" ;; esac # Do a test to see if this is a libtool program. - if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - relink_command= - . $dir/$noexename + if func_ltwrapper_p "$file"; then + if func_ltwrapper_executable_p "$file"; then + func_ltwrapper_scriptname "$file" + relink_command= + func_source $func_ltwrapper_scriptname_result + func_append rmfiles " $func_ltwrapper_scriptname_result" + else + relink_command= + func_source $dir/$noexename + fi # note $name still contains .exe if it was in $file originally # as does the version of $file that was added into $rmfiles - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + func_append rmfiles " $odir/$name $odir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" + func_append rmfiles " $odir/lt-$name" fi if test "X$noexename" != "X$name" ; then - rmfiles="$rmfiles $objdir/lt-${noexename}.c" + func_append rmfiles " $odir/lt-${noexename}.c" fi fi fi ;; esac - $show "$rm $rmfiles" - $run $rm $rmfiles || exit_status=1 + func_show_eval "$RM $rmfiles" 'exit_status=1' done - objdir="$origobjdir" # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then - $show "rmdir $dir" - $run rmdir $dir >/dev/null 2>&1 + func_show_eval "rmdir $dir >/dev/null 2>&1" fi done exit $exit_status - ;; +} - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE - ;; - esac +{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } && + func_mode_uninstall ${1+"$@"} - if test -z "$exec_cmd"; then - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit $EXIT_FAILURE - fi -fi # test -z "$show_help" +test -z "$opt_mode" && { + help="$generic_help" + func_fatal_help "you must specify a MODE" +} + +test -z "$exec_cmd" && \ + func_fatal_help "invalid operation mode \`$opt_mode'" if test -n "$exec_cmd"; then - eval exec $exec_cmd + eval exec "$exec_cmd" exit $EXIT_FAILURE fi -# We need to display help for each of the modes. -case $mode in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG - --version print version information - -MODE must be one of the following: - - clean remove files from the build directory - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE. - -Report bugs to <bug-libtool@gnu.org>." - exit $EXIT_SUCCESS - ;; - -clean) - $echo \ -"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of uninstalled libtool libraries - -static-libtool-libs - do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. +exit $exit_status -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo \ -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit $EXIT_FAILURE - ;; -esac - -$echo -$echo "Try \`$modename --help' for more information about other modes." - -exit $? # The TAGs below are defined such that we never get into a situation # in which we disable both kinds of libraries. Given conflicting @@ -6999,14 +9690,17 @@ exit $? # configuration. But we'll never go from static-only to shared-only. # ### BEGIN LIBTOOL TAG CONFIG: disable-shared -disable_libs=shared +build_libtool_libs=no +build_old_libs=yes # ### END LIBTOOL TAG CONFIG: disable-shared # ### BEGIN LIBTOOL TAG CONFIG: disable-static -disable_libs=static +build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` # ### END LIBTOOL TAG CONFIG: disable-static # Local Variables: # mode:shell-script # sh-indentation:2 # End: +# vi:sw=2 + diff --git a/config/ylwrap b/config/ylwrap new file mode 100644 index 000000000000..6879d8debb39 --- /dev/null +++ b/config/ylwrap @@ -0,0 +1,232 @@ +#! /bin/sh +# ylwrap - wrapper for lex/yacc invocations. + +scriptversion=2011-08-25.18; # UTC + +# Copyright (C) 1996-2012 Free Software Foundation, Inc. +# +# Written by Tom Tromey <tromey@cygnus.com>. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. + +case "$1" in + '') + echo "$0: No files given. Try '$0 --help' for more information." 1>&2 + exit 1 + ;; + --basedir) + basedir=$2 + shift 2 + ;; + -h|--h*) + cat <<\EOF +Usage: ylwrap [--help|--version] INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]... + +Wrapper for lex/yacc invocations, renaming files as desired. + + INPUT is the input file + OUTPUT is one file PROG generates + DESIRED is the file we actually want instead of OUTPUT + PROGRAM is program to run + ARGS are passed to PROG + +Any number of OUTPUT,DESIRED pairs may be used. + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v|--v*) + echo "ylwrap $scriptversion" + exit $? + ;; +esac + +get_dirname () +{ + case $1 in + */*|*\\*) printf '%s\n' "$1" | sed -e 's,\([\\/]\)[^\\/]*$,\1,';; + # Otherwise, we want the empty string (not "."). + esac +} + +quote_for_sed () +{ + # FIXME: really we should care about more than '.' and '\'. + sed -e 's,[\\.],\\&,g' +} + +# The input. +input="$1" +shift +# We'll later need for a correct munging of "#line" directives. +input_sub_rx=`get_dirname "$input" | quote_for_sed` +case "$input" in + [\\/]* | ?:[\\/]*) + # Absolute path; do nothing. + ;; + *) + # Relative path. Make it absolute. + input="`pwd`/$input" + ;; +esac + +pairlist= +while test "$#" -ne 0; do + if test "$1" = "--"; then + shift + break + fi + pairlist="$pairlist $1" + shift +done + +# The program to run. +prog="$1" +shift +# Make any relative path in $prog absolute. +case "$prog" in + [\\/]* | ?:[\\/]*) ;; + *[\\/]*) prog="`pwd`/$prog" ;; +esac + +# FIXME: add hostname here for parallel makes that run commands on +# other machines. But that might take us over the 14-char limit. +dirname=ylwrap$$ +do_exit="cd '`pwd`' && rm -rf $dirname > /dev/null 2>&1;"' (exit $ret); exit $ret' +trap "ret=129; $do_exit" 1 +trap "ret=130; $do_exit" 2 +trap "ret=141; $do_exit" 13 +trap "ret=143; $do_exit" 15 +mkdir $dirname || exit 1 + +cd $dirname + +case $# in + 0) "$prog" "$input" ;; + *) "$prog" "$@" "$input" ;; +esac +ret=$? + +if test $ret -eq 0; then + set X $pairlist + shift + first=yes + # Since DOS filename conventions don't allow two dots, + # the DOS version of Bison writes out y_tab.c instead of y.tab.c + # and y_tab.h instead of y.tab.h. Test to see if this is the case. + y_tab_nodot="no" + if test -f y_tab.c || test -f y_tab.h; then + y_tab_nodot="yes" + fi + + input_rx=`get_dirname "$input" | quote_for_sed` + + while test "$#" -ne 0; do + from="$1" + # Handle y_tab.c and y_tab.h output by DOS + if test $y_tab_nodot = "yes"; then + if test $from = "y.tab.c"; then + from="y_tab.c" + else + if test $from = "y.tab.h"; then + from="y_tab.h" + fi + fi + fi + if test -f "$from"; then + # If $2 is an absolute path name, then just use that, + # otherwise prepend '../'. + case "$2" in + [\\/]* | ?:[\\/]*) target="$2";; + *) target="../$2";; + esac + + # We do not want to overwrite a header file if it hasn't + # changed. This avoid useless recompilations. However the + # parser itself (the first file) should always be updated, + # because it is the destination of the .y.c rule in the + # Makefile. Divert the output of all other files to a temporary + # file so we can compare them to existing versions. + if test $first = no; then + realtarget="$target" + target="tmp-`echo $target | sed s/.*[\\/]//g`" + fi + # Munge "#line" or "#" directives. + # We don't want the resulting debug information to point at + # an absolute srcdir. + # We want to use the real output file name, not yy.lex.c for + # instance. + # We want the include guards to be adjusted too. + FROM=`echo "$from" | sed \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\ + -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'` + TARGET=`echo "$2" | sed \ + -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\ + -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'` + + sed -e "/^#/!b" -e "s,$input_rx,$input_sub_rx," -e "s,$from,$2," \ + -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$? + + # Check whether header files must be updated. + if test $first = no; then + if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then + echo "$2" is unchanged + rm -f "$target" + else + echo updating "$2" + mv -f "$target" "$realtarget" + fi + fi + else + # A missing file is only an error for the first file. This + # is a blatant hack to let us support using "yacc -d". If -d + # is not specified, we don't want an error when the header + # file is "missing". + if test $first = yes; then + ret=1 + fi + fi + shift + shift + first=no + done +else + ret=$? +fi + +# Remove the directory. +cd .. +rm -rf $dirname + +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/configure b/configure index bd79932e98f2..f1a473e0caa5 100755 --- a/configure +++ b/configure @@ -1,21 +1,23 @@ #! /bin/sh -# From configure.ac P4: //depot/projects/trustedbsd/openbsm/configure.ac#53 . +# From configure.ac P4: //depot/projects/trustedbsd/openbsm/configure.ac#62 . # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.62 for OpenBSM 1.1p2. +# Generated by GNU Autoconf 2.69 for OpenBSM 1.2alpha2. # # Report bugs to <trustedbsd-audit@TrustesdBSD.org>. # -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which @@ -23,23 +25,15 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; esac - fi - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - as_nl=' ' export as_nl @@ -47,7 +41,13 @@ export as_nl as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else @@ -58,7 +58,7 @@ else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; - case $arg in + case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; @@ -81,13 +81,6 @@ if test "${PATH_SEPARATOR+set}" != set; then } fi -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - # IFS # We need space, tab and new line, in precisely that order. Quoting is @@ -97,15 +90,16 @@ fi IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -case $0 in +as_myself= +case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done IFS=$as_save_IFS ;; @@ -117,12 +111,16 @@ if test "x$as_myself" = x; then fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } + exit 1 fi -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' @@ -134,330 +132,353 @@ export LC_ALL LANGUAGE=C export LANGUAGE -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - # CDPATH. -$as_unset CDPATH - +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} if test "x$CONFIG_SHELL" = x; then - if (eval ":") 2>/dev/null; then - as_have_required=yes + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST else - as_have_required=no + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac fi - - if test $as_have_required = yes && (eval ": -(as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 + + test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ + || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes else - exitcode=1 - echo positional parameters were not saved. + as_have_required=no fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : -test \$exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=\$LINENO - as_lineno_2=\$LINENO - test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && - test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -") 2> /dev/null; then - : else - as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - case $as_dir in + as_found=: + case $as_dir in #( /*) for as_base in sh bash ksh sh5; do - as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi done;; esac + as_found=false done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } IFS=$as_save_IFS - for as_shell in $as_candidate_shells $SHELL; do - # Try only shells that exist, to save several forks. - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { ("$as_shell") 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -_ASEOF -}; then - CONFIG_SHELL=$as_shell - as_have_required=yes - if { "$as_shell" 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -(as_func_return () { - (exit $1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = "$1" ); then - : -else - exitcode=1 - echo positional parameters were not saved. + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: trustedbsd-audit@TrustesdBSD.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 fi - -test $exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } - -_ASEOF -}; then - break fi - fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS - done - - if test "x$CONFIG_SHELL" != x; then - for as_var in BASH_ENV ENV - do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - done - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -fi +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status - if test $as_have_required = no; then - echo This script requires a shell more modern than all the - echo shells that I found on your system. Please install a - echo modern shell, or manually run the script under such a - echo shell if you do have one. - { (exit 1); exit 1; } -fi +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" -fi -fi +} # as_fn_mkdir_p +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith -(eval "as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error -exitcode=0 -if as_func_success; then - : +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. + as_expr=false fi -if as_func_ret_success; then - : +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. + as_basename=false fi -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname else - exitcode=1 - echo positional parameters were not saved. + as_dirname=false fi -test \$exitcode = 0") || { - echo No shell found that supports shell functions. - echo Please tell bug-autoconf@gnu.org about your system, - echo including any error possibly output before this message. - echo This can help us improve future autoconf versions. - echo Configuration will now proceed without shell functions. -} - +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) sed -n ' p /[$]LINENO/= @@ -474,9 +495,12 @@ test \$exitcode = 0") || { s/-\n.*// ' >$as_me.lineno && chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensitive to this). @@ -485,29 +509,18 @@ test \$exitcode = 0") || { exit } - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in +case `echo -n x` in #((((( -n*) - case `echo 'x\c'` in + case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then @@ -522,49 +535,29 @@ if (echo >conf$$.file) 2>/dev/null; then # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' + as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -572,166 +565,14 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - - -# Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} -case X$ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -echo=${ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then - # Yippee, $echo works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF -$* -EOF - exit 0 -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test -z "$ECHO"; then -if test "X${echo_test_string+set}" != Xset; then -# find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if (echo_test_string=`eval $cmd`) 2>/dev/null && - echo_test_string=`eval $cmd` && - (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null - then - break - fi - done -fi - -if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : -else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$echo" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - echo='print -r' - elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - echo='printf %s\n' - if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - echo="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - echo="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - echo=echo - fi - fi - fi - fi -fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -ECHO=$echo -if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - - -tagnames=${tagnames+${tagnames},}CXX - -tagnames=${tagnames+${tagnames},}F77 -exec 7<&0 </dev/null 6>&1 +test -n "$DJDIR" || exec 7<&0 </dev/null +exec 6>&1 # Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, # so uname gets run too. ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` @@ -746,14 +587,14 @@ cross_compiling=no subdirs= MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='OpenBSM' PACKAGE_TARNAME='openbsm' -PACKAGE_VERSION='1.1p2' -PACKAGE_STRING='OpenBSM 1.1p2' +PACKAGE_VERSION='1.2alpha2' +PACKAGE_STRING='OpenBSM 1.2alpha2' PACKAGE_BUGREPORT='trustedbsd-audit@TrustesdBSD.org' +PACKAGE_URL='' ac_unique_file="bin/auditreduce/auditreduce.c" # Factoring default headers for most tests. @@ -794,123 +635,133 @@ ac_includes_default="\ ac_header_list= ac_func_list= -ac_subst_vars='SHELL -PATH_SEPARATOR -PACKAGE_NAME -PACKAGE_TARNAME -PACKAGE_VERSION -PACKAGE_STRING -PACKAGE_BUGREPORT -exec_prefix -prefix -program_transform_name -bindir -sbindir -libexecdir -datarootdir -datadir -sysconfdir -sharedstatedir -localstatedir -includedir -oldincludedir -docdir -infodir -htmldir -dvidir -pdfdir -psdir -libdir -localedir -mandir -DEFS -ECHO_C -ECHO_N -ECHO_T -LIBS -build_alias -host_alias -target_alias -MAINTAINER_MODE_TRUE -MAINTAINER_MODE_FALSE -MAINT -USE_NATIVE_INCLUDES_TRUE -USE_NATIVE_INCLUDES_FALSE -MIG -CC -CFLAGS -LDFLAGS -CPPFLAGS -ac_ct_CC -EXEEXT -OBJEXT -INSTALL_PROGRAM -INSTALL_SCRIPT -INSTALL_DATA -build -build_cpu -build_vendor -build_os -host -host_cpu -host_vendor -host_os -SED -GREP -EGREP -LN_S -ECHO -AR +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +USE_MACH_IPC_FALSE +USE_MACH_IPC_TRUE +HAVE_AUDIT_SYSCALLS_FALSE +HAVE_AUDIT_SYSCALLS_TRUE +LIBOBJS +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +YFLAGS +YACC +CPP +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +AWK RANLIB STRIP -DSYMUTIL -NMEDIT -CPP -CXX -CXXFLAGS -ac_ct_CXX -CXXCPP -F77 -FFLAGS -ac_ct_F77 +ac_ct_AR +AR +DLLTOOL +OBJDUMP +LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +EGREP +GREP +SED +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build LIBTOOL -am__isrc -CYGPATH_W -PACKAGE -VERSION -ACLOCAL -AUTOCONF -AUTOMAKE -AUTOHEADER -MAKEINFO -install_sh -INSTALL_STRIP_PROGRAM -MKDIR_P -mkdir_p -AWK -SET_MAKE -am__leading_dot -AMTAR -am__tar -am__untar -DEPDIR -am__include -am__quote -AMDEP_TRUE -AMDEP_FALSE -AMDEPBACKSLASH -CCDEPMODE -am__fastdepCC_TRUE -am__fastdepCC_FALSE -CXXDEPMODE -am__fastdepCXX_TRUE -am__fastdepCXX_FALSE -LIBOBJS -HAVE_AUDIT_SYSCALLS_TRUE -HAVE_AUDIT_SYSCALLS_FALSE -USE_MACH_IPC_TRUE -USE_MACH_IPC_FALSE -LTLIBOBJS' +LEXLIB +LEX_OUTPUT_ROOT +LEX +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +MIG +USE_NATIVE_INCLUDES_FALSE +USE_NATIVE_INCLUDES_TRUE +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking @@ -918,11 +769,11 @@ enable_maintainer_mode with_native_includes enable_shared enable_static +with_pic enable_fast_install with_gnu_ld +with_sysroot enable_libtool_lock -with_pic -with_tags enable_dependency_tracking ' ac_precious_vars='build_alias @@ -934,12 +785,8 @@ LDFLAGS LIBS CPPFLAGS CPP -CXX -CXXFLAGS -CCC -CXXCPP -F77 -FFLAGS' +YACC +YFLAGS' # Initialize some variables set by options. @@ -1002,8 +849,9 @@ do fi case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *) ac_optarg=yes ;; + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. @@ -1048,8 +896,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1075,8 +922,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid feature name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1280,8 +1126,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1297,8 +1142,7 @@ do ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "invalid package name: $ac_useropt" ac_useropt_orig=$ac_useropt ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` case $ac_user_opts in @@ -1328,17 +1172,17 @@ do | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries=$ac_optarg ;; - -*) { $as_echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" ;; *=*) ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac eval $ac_envvar=\$ac_optarg export $ac_envvar ;; @@ -1347,7 +1191,7 @@ Try \`$0 --help' for more information." >&2 $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" ;; esac @@ -1355,16 +1199,14 @@ done if test -n "$ac_prev"; then ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { $as_echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "missing argument to $ac_option" fi if test -n "$ac_unrecognized_opts"; then case $enable_option_checking in no) ;; - fatal) { $as_echo "$as_me: error: Unrecognized options: $ac_unrecognized_opts" >&2 - { (exit 1); exit 1; }; } ;; - *) $as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2 ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; esac fi @@ -1386,8 +1228,7 @@ do [\\/$]* | ?:[\\/]* ) continue;; NONE | '' ) case $ac_var in *prefix ) continue;; esac;; esac - { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" done # There might be people who depend on the old broken behavior: `$host' @@ -1401,8 +1242,6 @@ target=$target_alias if test "x$host_alias" != x; then if test "x$build_alias" = x; then cross_compiling=maybe - $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 elif test "x$build_alias" != "x$host_alias"; then cross_compiling=yes fi @@ -1417,11 +1256,9 @@ test "$silent" = yes && exec 6>/dev/null ac_pwd=`pwd` && test -n "$ac_pwd" && ac_ls_di=`ls -di .` && ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - { $as_echo "$as_me: error: Working directory cannot be determined" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "working directory cannot be determined" test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "pwd does not report name of working directory" # Find the source files, if location was not specified. @@ -1460,13 +1297,11 @@ else fi if test ! -r "$srcdir/$ac_unique_file"; then test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" fi ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 - { (exit 1); exit 1; }; } + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" pwd)` # When building in place, set srcdir=. if test "$ac_abs_confdir" = "$ac_pwd"; then @@ -1492,7 +1327,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures OpenBSM 1.1p2 to adapt to many kinds of systems. +\`configure' configures OpenBSM 1.2alpha2 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1506,7 +1341,7 @@ Configuration: --help=short display options specific to this package --help=recursive display the short help of all the included packages -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages + -q, --quiet, --silent do not print \`checking ...' messages --cache-file=FILE cache test results in FILE [disabled] -C, --config-cache alias for \`--cache-file=config.cache' -n, --no-create do not create output files @@ -1562,7 +1397,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of OpenBSM 1.1p2:";; + short | recursive ) echo "Configuration of OpenBSM 1.2alpha2:";; esac cat <<\_ACEOF @@ -1570,25 +1405,29 @@ Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer + --enable-maintainer-mode + enable make rules and dependencies not useful (and + sometimes confusing) to the casual installer --enable-shared[=PKGS] build shared libraries [default=yes] --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --with-native-includes Use the system native include files instead of those included with openbsm. - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-pic try to use only PIC/non-PIC objects [default=use + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] - --with-tags[=TAGS] include additional configurations [automatic] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot=DIR Search for dependent libraries within DIR + (or the compiler's sysroot if not specified). Some influential environment variables: CC C compiler command @@ -1596,14 +1435,15 @@ Some influential environment variables: LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a nonstandard directory <lib dir> LIBS libraries to pass to the linker, e.g. -l<library> - CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if you have headers in a nonstandard directory <include dir> CPP C preprocessor - CXX C++ compiler command - CXXFLAGS C++ compiler flags - CXXCPP C++ preprocessor - F77 Fortran 77 compiler command - FFLAGS Fortran 77 compiler flags + YACC The `Yet Another Compiler Compiler' implementation to use. + Defaults to the first program found out of: `bison -y', `byacc', + `yacc'. + YFLAGS The list of arguments that will be passed by default to $YACC. + This script will default YFLAGS to the empty string to avoid a + default value of `-d' given by some make applications. Use these variables to override the choices made by `configure' or to help it to find libraries and programs with nonstandard names/locations. @@ -1671,22 +1511,488 @@ fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -OpenBSM configure 1.1p2 -generated by GNU Autoconf 2.62 +OpenBSM configure 1.2alpha2 +generated by GNU Autoconf 2.69 -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This configure script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. _ACEOF exit fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case <limits.h> declares $2. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( $as_echo "## ----------------------------------------------- ## +## Report this to trustedbsd-audit@TrustesdBSD.org ## +## ----------------------------------------------- ##" + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_type + +# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES +# ---------------------------------------------------- +# Tries to find if the field MEMBER exists in type AGGR, after including +# INCLUDES, setting cache variable VAR accordingly. +ac_fn_c_check_member () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5 +$as_echo_n "checking for $2.$3... " >&6; } +if eval \${$4+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$5 +int +main () +{ +static $2 ac_aggr; +if (ac_aggr.$3) +return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$4=yes" +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$5 +int +main () +{ +static $2 ac_aggr; +if (sizeof ac_aggr.$3) +return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$4=yes" +else + eval "$4=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$4 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_member cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by OpenBSM $as_me 1.1p2, which was -generated by GNU Autoconf 2.62. Invocation command line was +It was created by OpenBSM $as_me 1.2alpha2, which was +generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -1722,8 +2028,8 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" -done + $as_echo "PATH: $as_dir" + done IFS=$as_save_IFS } >&5 @@ -1760,9 +2066,9 @@ do ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; esac case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" + as_fn_append ac_configure_args1 " '$ac_arg'" if test $ac_must_keep_next = true; then ac_must_keep_next=false # Got value, back to normal. else @@ -1778,13 +2084,13 @@ do -* ) ac_must_keep_next=true ;; esac fi - ac_configure_args="$ac_configure_args '$ac_arg'" + as_fn_append ac_configure_args " '$ac_arg'" ;; esac done done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} # When interrupted or exit'd, cleanup temporary files, and complete # config.log. We remove comments because anyway the quotes in there @@ -1796,11 +2102,9 @@ trap 'exit_status=$? { echo - cat <<\_ASBOX -## ---------------- ## + $as_echo "## ---------------- ## ## Cache variables. ## -## ---------------- ## -_ASBOX +## ---------------- ##" echo # The following way of writing the cache mishandles newlines in values, ( @@ -1809,13 +2113,13 @@ _ASBOX case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) $as_unset $ac_var ;; + *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done @@ -1834,11 +2138,9 @@ $as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ) echo - cat <<\_ASBOX -## ----------------- ## + $as_echo "## ----------------- ## ## Output variables. ## -## ----------------- ## -_ASBOX +## ----------------- ##" echo for ac_var in $ac_subst_vars do @@ -1851,11 +2153,9 @@ _ASBOX echo if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## + $as_echo "## ------------------- ## ## File substitutions. ## -## ------------------- ## -_ASBOX +## ------------------- ##" echo for ac_var in $ac_subst_files do @@ -1869,11 +2169,9 @@ _ASBOX fi if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## + $as_echo "## ----------- ## ## confdefs.h. ## -## ----------- ## -_ASBOX +## ----------- ##" echo cat confdefs.h echo @@ -1887,46 +2185,53 @@ _ASBOX exit $exit_status ' 0 for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal done ac_signal=0 # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -f -r conftest* confdefs.h +$as_echo "/* confdefs.h */" > confdefs.h + # Predefined preprocessor variables. cat >>confdefs.h <<_ACEOF #define PACKAGE_NAME "$PACKAGE_NAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_TARNAME "$PACKAGE_TARNAME" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_VERSION "$PACKAGE_VERSION" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_STRING "$PACKAGE_STRING" _ACEOF - cat >>confdefs.h <<_ACEOF #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" _ACEOF +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + # Let the site file select an alternate cache file if it wants to. # Prefer an explicitly selected file to automatically selected ones. ac_site_file1=NONE ac_site_file2=NONE if test -n "$CONFIG_SITE"; then - ac_site_file1=$CONFIG_SITE + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac elif test "x$prefix" != xNONE; then ac_site_file1=$prefix/share/config.site ac_site_file2=$prefix/etc/config.site @@ -1937,19 +2242,23 @@ fi for ac_site_file in "$ac_site_file1" "$ac_site_file2" do test "x$ac_site_file" = xNONE && continue - if test -r "$ac_site_file"; then - { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 $as_echo "$as_me: loading site script $ac_site_file" >&6;} sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } fi done if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 $as_echo "$as_me: loading cache $cache_file" >&6;} case $cache_file in [\\/]* | ?:[\\/]* ) . "$cache_file";; @@ -1957,14 +2266,14 @@ $as_echo "$as_me: loading cache $cache_file" >&6;} esac fi else - { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 $as_echo "$as_me: creating cache $cache_file" >&6;} >$cache_file fi -ac_header_list="$ac_header_list sys/time.h" -ac_header_list="$ac_header_list unistd.h" -ac_func_list="$ac_func_list alarm" +as_fn_append ac_header_list " sys/time.h" +as_fn_append ac_header_list " unistd.h" +as_fn_append ac_func_list " alarm" # Check that the precious variables saved in the cache have kept the same # value. ac_cache_corrupted=false @@ -1975,11 +2284,11 @@ for ac_var in $ac_precious_vars; do eval ac_new_val=\$ac_env_${ac_var}_value case $ac_old_set,$ac_new_set in set,) - { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} ac_cache_corrupted=: ;; ,set) - { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_cache_corrupted=: ;; ,);; @@ -1989,17 +2298,17 @@ $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} ac_old_val_w=`echo x $ac_old_val` ac_new_val_w=`echo x $ac_new_val` if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 $as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} ac_cache_corrupted=: else - { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 $as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} eval $ac_var=\$ac_old_val fi - { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 $as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} fi;; esac @@ -2011,41 +2320,20 @@ $as_echo "$as_me: current value: \`$ac_new_val'" >&2;} esac case " $ac_configure_args " in *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) as_fn_append ac_configure_args " '$ac_arg'" ;; esac fi done if $ac_cache_corrupted; then - { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 $as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 fi - - - - - - - - - - - - - - - - - - - - - - - - +## -------------------- ## +## Main body of script. ## +## -------------------- ## ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -2056,6 +2344,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + ac_aux_dir= for ac_dir in config "$srcdir"/config; do if test -f "$ac_dir/install-sh"; then @@ -2073,9 +2362,7 @@ for ac_dir in config "$srcdir"/config; do fi done if test -z "$ac_aux_dir"; then - { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in config \"$srcdir\"/config" >&5 -$as_echo "$as_me: error: cannot find install-sh or install.sh in config \"$srcdir\"/config" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "cannot find install-sh, install.sh, or shtool in config \"$srcdir\"/config" "$LINENO" 5 fi # These three variables are undocumented and unsupported, @@ -2087,18 +2374,20 @@ ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + ac_config_headers="$ac_config_headers config/config.h" -{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 $as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then +if test "${enable_maintainer_mode+set}" = set; then : enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval else USE_MAINTAINER_MODE=no fi - { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 $as_echo "$USE_MAINTAINER_MODE" >&6; } if test $USE_MAINTAINER_MODE = yes; then MAINTAINER_MODE_TRUE= @@ -2115,12 +2404,10 @@ fi # --with-native-includes forces the use of the system bsm headers. # Check whether --with-native-includes was given. -if test "${with_native_includes+set}" = set; then +if test "${with_native_includes+set}" = set; then : withval=$with_native_includes; -cat >>confdefs.h <<\_ACEOF -#define USE_NATIVE_INCLUDES /**/ -_ACEOF +$as_echo "#define USE_NATIVE_INCLUDES /**/" >>confdefs.h use_native_includes=true @@ -2141,9 +2428,9 @@ for ac_prog in mig do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_MIG+set}" = set; then +if ${ac_cv_path_MIG+:} false; then : $as_echo_n "(cached) " >&6 else case $MIG in @@ -2156,14 +2443,14 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_path_MIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS ;; @@ -2171,10 +2458,10 @@ esac fi MIG=$ac_cv_path_MIG if test -n "$MIG"; then - { $as_echo "$as_me:$LINENO: result: $MIG" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MIG" >&5 $as_echo "$MIG" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2192,9 +2479,9 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2205,24 +2492,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2232,9 +2519,9 @@ if test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -2245,24 +2532,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2271,12 +2558,8 @@ fi else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC @@ -2289,9 +2572,9 @@ if test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2302,24 +2585,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2329,9 +2612,9 @@ fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2343,18 +2626,18 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS if test $ac_prog_rejected = yes; then @@ -2373,10 +2656,10 @@ fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2388,9 +2671,9 @@ if test -z "$CC"; then do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then +if ${ac_cv_prog_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$CC"; then @@ -2401,24 +2684,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi CC=$ac_cv_prog_CC if test -n "$CC"; then - { $as_echo "$as_me:$LINENO: result: $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 $as_echo "$CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2432,9 +2715,9 @@ if test -z "$CC"; then do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +if ${ac_cv_prog_ac_ct_CC+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$ac_ct_CC"; then @@ -2445,24 +2728,24 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi ac_ct_CC=$ac_cv_prog_ac_ct_CC if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 $as_echo "$ac_ct_CC" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi @@ -2475,12 +2758,8 @@ done else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac CC=$ac_ct_CC @@ -2490,55 +2769,37 @@ fi fi -test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } # Provide some information about the compiler. -$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 set X $ac_compile ac_compiler=$2 -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -v >&5") 2>&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2554,8 +2815,8 @@ ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" # Try to create an executable without -o first, disregard a.out. # It will help us diagnose broken compilers, and finding out an intuition # of exeext. -{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` # The possible output files: @@ -2571,17 +2832,17 @@ do done rm -f $ac_rmfiles -if { (ac_try="$ac_link_default" +if { { ac_try="$ac_link_default" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_link_default") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. # So ignore a value of `no', otherwise this would lead to `EXEEXT = no' # in a Makefile. We should not override ac_cv_exeext if it was cached, @@ -2598,7 +2859,7 @@ do # certainly right. break;; *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; then :; else ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` fi @@ -2617,80 +2878,41 @@ test "$ac_cv_exeext" = no && ac_cv_exeext= else ac_file='' fi - -{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -if test -z "$ac_file"; then - $as_echo "$as_me: failed program was:" >&5 +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } fi - +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } ac_exeext=$ac_cv_exeext -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -{ $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out ac_clean_files=$ac_clean_files_save -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 $as_echo_n "checking for suffix of executables... " >&6; } -if { (ac_try="$ac_link" +if { { ac_try="$ac_link" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_link") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : # If both `conftest.exe' and `conftest' are `present' (well, observable) # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will # work properly (i.e., refer to `conftest.exe'), while it won't with @@ -2705,30 +2927,83 @@ for ac_file in conftest.exe conftest conftest.*; do esac done else - { { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } fi - -rm -f conftest$ac_cv_exeext -{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 $as_echo "$ac_cv_exeext" >&6; } rm -f conftest.$ac_ext EXEEXT=$ac_cv_exeext ac_exeext=$EXEEXT -{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <stdio.h> +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 $as_echo_n "checking for suffix of object files... " >&6; } -if test "${ac_cv_objext+set}" = set; then +if ${ac_cv_objext+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2740,17 +3015,17 @@ main () } _ACEOF rm -f conftest.o conftest.obj -if { (ac_try="$ac_compile" +if { { ac_try="$ac_compile" case "(($ac_try" in *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; *) ac_try_echo=$ac_try;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 (eval "$ac_compile") 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : for ac_file in conftest.o conftest.obj conftest.*; do test -f "$ac_file" || continue; case $ac_file in @@ -2763,29 +3038,23 @@ else $as_echo "$as_me: failed program was:" >&5 sed 's/^/| /' conftest.$ac_ext >&5 -{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } fi - rm -f conftest.$ac_cv_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 $as_echo "$ac_cv_objext" >&6; } OBJEXT=$ac_cv_objext ac_objext=$OBJEXT -{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then +if ${ac_cv_c_compiler_gnu+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2799,37 +3068,16 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_compiler_gnu=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_compiler_gnu=no + ac_compiler_gnu=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_cv_c_compiler_gnu=$ac_compiler_gnu fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 $as_echo "$ac_cv_c_compiler_gnu" >&6; } if test $ac_compiler_gnu = yes; then GCC=yes @@ -2838,20 +3086,16 @@ else fi ac_test_CFLAGS=${CFLAGS+set} ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 $as_echo_n "checking whether $CC accepts -g... " >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then +if ${ac_cv_prog_cc_g+:} false; then : $as_echo_n "(cached) " >&6 else ac_save_c_werror_flag=$ac_c_werror_flag ac_c_werror_flag=yes ac_cv_prog_cc_g=no CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2862,35 +3106,11 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - CFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2901,36 +3121,12 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_compile "$LINENO"; then : - ac_c_werror_flag=$ac_save_c_werror_flag +else + ac_c_werror_flag=$ac_save_c_werror_flag CFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -2941,42 +3137,17 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_g=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ac_c_werror_flag=$ac_save_c_werror_flag fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 $as_echo "$ac_cv_prog_cc_g" >&6; } if test "$ac_test_CFLAGS" = set; then CFLAGS=$ac_save_CFLAGS @@ -2993,23 +3164,18 @@ else CFLAGS= fi fi -{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then +if ${ac_cv_prog_cc_c89+:} false; then : $as_echo_n "(cached) " >&6 else ac_cv_prog_cc_c89=no ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <stdarg.h> #include <stdio.h> -#include <sys/types.h> -#include <sys/stat.h> +struct stat; /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ struct buf { int x; }; FILE * (*rcsopen) (struct buf *, struct stat *, int); @@ -3061,32 +3227,9 @@ for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" do CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then + if ac_fn_c_try_compile "$LINENO"; then : ac_cv_prog_cc_c89=$ac_arg -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - fi - rm -f core conftest.err conftest.$ac_objext test "x$ac_cv_prog_cc_c89" != "xno" && break done @@ -3097,17 +3240,19 @@ fi # AC_CACHE_VAL case "x$ac_cv_prog_cc_c89" in x) - { $as_echo "$as_me:$LINENO: result: none needed" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 $as_echo "none needed" >&6; } ;; xno) - { $as_echo "$as_me:$LINENO: result: unsupported" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 $as_echo "unsupported" >&6; } ;; *) CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;; esac +if test "x$ac_cv_prog_cc_c89" != xno; then : +fi ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -3129,10 +3274,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu # OS/2's system install, which has a completely different semantic # ./install, which can be erroneously created by make from ./install.sh. # Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 $as_echo_n "checking for a BSD-compatible install... " >&6; } if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then +if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -3140,11 +3285,11 @@ for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ /usr/ucb/* ) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. @@ -3152,7 +3297,7 @@ case $as_dir/ in # by default. for ac_prog in ginstall scoinst install; do for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then if test $ac_prog = install && grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. @@ -3181,7 +3326,7 @@ case $as_dir/ in ;; esac -done + done IFS=$as_save_IFS rm -rf conftest.one conftest.two conftest.dir @@ -3197,7 +3342,7 @@ fi INSTALL=$ac_install_sh fi fi -{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 $as_echo "$INSTALL" >&6; } # Use test -z because SunOS4 sh mishandles braces in ${var-val}. @@ -3208,109 +3353,214 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -# Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac + +for ac_prog in flex lex +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LEX+:} false; then : + $as_echo_n "(cached) " >&6 else - enable_shared=yes + if test -n "$LEX"; then + ac_cv_prog_LEX="$LEX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LEX="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LEX=$ac_cv_prog_LEX +if test -n "$LEX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LEX" >&5 +$as_echo "$LEX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -# Check whether --enable-static was given. -if test "${enable_static+set}" = set; then - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac + test -n "$LEX" && break +done +test -n "$LEX" || LEX=":" + +if test "x$LEX" != "x:"; then + cat >conftest.l <<_ACEOF +%% +a { ECHO; } +b { REJECT; } +c { yymore (); } +d { yyless (1); } +e { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ + yyless ((input () != 0)); } +f { unput (yytext[0]); } +. { BEGIN INITIAL; } +%% +#ifdef YYTEXT_POINTER +extern char *yytext; +#endif +int +main (void) +{ + return ! yylex () + ! yywrap (); +} +_ACEOF +{ { ac_try="$LEX conftest.l" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$LEX conftest.l") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking lex output file root" >&5 +$as_echo_n "checking lex output file root... " >&6; } +if ${ac_cv_prog_lex_root+:} false; then : + $as_echo_n "(cached) " >&6 else - enable_static=yes + +if test -f lex.yy.c; then + ac_cv_prog_lex_root=lex.yy +elif test -f lexyy.c; then + ac_cv_prog_lex_root=lexyy +else + as_fn_error $? "cannot find output from $LEX; giving up" "$LINENO" 5 +fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_root" >&5 +$as_echo "$ac_cv_prog_lex_root" >&6; } +LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root +if test -z "${LEXLIB+set}"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking lex library" >&5 +$as_echo_n "checking lex library... " >&6; } +if ${ac_cv_lib_lex+:} false; then : + $as_echo_n "(cached) " >&6 +else -# Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac + ac_save_LIBS=$LIBS + ac_cv_lib_lex='none needed' + for ac_lib in '' -lfl -ll; do + LIBS="$ac_lib $ac_save_LIBS" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +`cat $LEX_OUTPUT_ROOT.c` +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_lex=$ac_lib +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + test "$ac_cv_lib_lex" != 'none needed' && break + done + LIBS=$ac_save_LIBS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lex" >&5 +$as_echo "$ac_cv_lib_lex" >&6; } + test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether yytext is a pointer" >&5 +$as_echo_n "checking whether yytext is a pointer... " >&6; } +if ${ac_cv_prog_lex_yytext_pointer+:} false; then : + $as_echo_n "(cached) " >&6 else - enable_fast_install=yes + # POSIX says lex can declare yytext either as a pointer or an array; the +# default is implementation-dependent. Figure out which it is, since +# not all implementations provide the %pointer and %array declarations. +ac_cv_prog_lex_yytext_pointer=no +ac_save_LIBS=$LIBS +LIBS="$LEXLIB $ac_save_LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #define YYTEXT_POINTER 1 +`cat $LEX_OUTPUT_ROOT.c` +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_prog_lex_yytext_pointer=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_save_LIBS + fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_yytext_pointer" >&5 +$as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; } +if test $ac_cv_prog_lex_yytext_pointer = yes; then + +$as_echo "#define YYTEXT_POINTER 1" >>confdefs.h + +fi +rm -f conftest.l $LEX_OUTPUT_ROOT.c + +fi +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.4.2' +macro_revision='1.3337' + + + + + + + + + + + +ltmain="$ac_aux_dir/ltmain.sh" + # Make sure we can run config.sub. $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 -{ $as_echo "$as_me:$LINENO: checking build system type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 $as_echo_n "checking build system type... " >&6; } -if test "${ac_cv_build+set}" = set; then +if ${ac_cv_build+:} false; then : $as_echo_n "(cached) " >&6 else ac_build_alias=$build_alias test "x$ac_build_alias" = x && ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` test "x$ac_build_alias" = x && - { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 $as_echo "$ac_cv_build" >&6; } case $ac_cv_build in *-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -$as_echo "$as_me: error: invalid value of canonical build" >&2;} - { (exit 1); exit 1; }; };; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; esac build=$ac_cv_build ac_save_IFS=$IFS; IFS='-' @@ -3326,28 +3576,24 @@ IFS=$ac_save_IFS case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -{ $as_echo "$as_me:$LINENO: checking host system type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 $as_echo_n "checking host system type... " >&6; } -if test "${ac_cv_host+set}" = set; then +if ${ac_cv_host+:} false; then : $as_echo_n "(cached) " >&6 else if test "x$host_alias" = x; then ac_cv_host=$ac_cv_build else ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 $as_echo "$ac_cv_host" >&6; } case $ac_cv_host in *-*-*) ;; -*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -$as_echo "$as_me: error: invalid value of canonical host" >&2;} - { (exit 1); exit 1; }; };; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; esac host=$ac_cv_host ac_save_IFS=$IFS; IFS='-' @@ -3363,68 +3609,160 @@ IFS=$ac_save_IFS case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +$as_echo_n "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case "$ECHO" in + printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +$as_echo "printf" >&6; } ;; + print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +$as_echo "print -r" >&6; } ;; + *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +$as_echo "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 $as_echo_n "checking for a sed that does not truncate output... " >&6; } -if test "${lt_cv_path_SED+set}" = set; then +if ${ac_cv_path_SED+:} false; then : $as_echo_n "(cached) " >&6 else - # Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do + for ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 done done -done + done IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done +else + ac_cv_path_SED=$SED +fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + -SED=$lt_cv_path_SED -{ $as_echo "$as_me:$LINENO: result: $SED" >&5 -$as_echo "$SED" >&6; } -{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 $as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if test "${ac_cv_path_GREP+set}" = set; then +if ${ac_cv_path_GREP+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$GREP"; then @@ -3435,10 +3773,10 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do + for ac_prog in grep ggrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue + as_fn_executable_p "$ac_path_GREP" || continue # Check for GNU ac_path_GREP and select it if it is found. # Check for GNU $ac_path_GREP case `"$ac_path_GREP" --version 2>&1` in @@ -3455,7 +3793,7 @@ case `"$ac_path_GREP" --version 2>&1` in $as_echo 'GREP' >> "conftest.nl" "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` + as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_GREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_GREP="$ac_path_GREP" @@ -3470,26 +3808,24 @@ esac $ac_path_GREP_found && break 3 done done -done + done IFS=$as_save_IFS if test -z "$ac_cv_path_GREP"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_GREP=$GREP fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 $as_echo "$ac_cv_path_GREP" >&6; } GREP="$ac_cv_path_GREP" -{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 $as_echo_n "checking for egrep... " >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then +if ${ac_cv_path_EGREP+:} false; then : $as_echo_n "(cached) " >&6 else if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 @@ -3503,10 +3839,10 @@ for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do + for ac_prog in egrep; do for ac_exec_ext in '' $ac_executable_extensions; do ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue + as_fn_executable_p "$ac_path_EGREP" || continue # Check for GNU ac_path_EGREP and select it if it is found. # Check for GNU $ac_path_EGREP case `"$ac_path_EGREP" --version 2>&1` in @@ -3523,7 +3859,7 @@ case `"$ac_path_EGREP" --version 2>&1` in $as_echo 'EGREP' >> "conftest.nl" "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - ac_count=`expr $ac_count + 1` + as_fn_arith $ac_count + 1 && ac_count=$as_val if test $ac_count -gt ${ac_path_EGREP_max-0}; then # Best one so far, save it but keep looking for a better one ac_cv_path_EGREP="$ac_path_EGREP" @@ -3538,12 +3874,10 @@ esac $ac_path_EGREP_found && break 3 done done -done + done IFS=$as_save_IFS if test -z "$ac_cv_path_EGREP"; then - { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 -$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 fi else ac_cv_path_EGREP=$EGREP @@ -3551,14 +3885,100 @@ fi fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 $as_echo "$ac_cv_path_EGREP" >&6; } EGREP="$ac_cv_path_EGREP" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if ${ac_cv_path_FGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + # Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then +if test "${with_gnu_ld+set}" = set; then : withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no @@ -3567,7 +3987,7 @@ fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 $as_echo_n "checking for ld used by $CC... " >&6; } case $host in *-*-mingw*) @@ -3581,9 +4001,9 @@ $as_echo_n "checking for ld used by $CC... " >&6; } [\\/]* | ?:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; @@ -3597,13 +4017,13 @@ $as_echo_n "checking for ld used by $CC... " >&6; } ;; esac elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 $as_echo_n "checking for GNU ld... " >&6; } else - { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 $as_echo_n "checking for non-GNU ld... " >&6; } fi -if test "${lt_cv_path_LD+set}" = set; then +if ${lt_cv_path_LD+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$LD"; then @@ -3634,18 +4054,16 @@ fi LD="$lt_cv_path_LD" if test -n "$LD"; then - { $as_echo "$as_me:$LINENO: result: $LD" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 $as_echo "$LD" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 $as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if test "${lt_cv_prog_gnu_ld+set}" = set; then +if ${lt_cv_prog_gnu_ld+:} false; then : $as_echo_n "(cached) " >&6 else # I'd rather use --version here, but apparently some GNU lds only accept -v. @@ -3658,39 +4076,21 @@ case `$LD -v 2>&1 </dev/null` in ;; esac fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 $as_echo "$lt_cv_prog_gnu_ld" >&6; } with_gnu_ld=$lt_cv_prog_gnu_ld -{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if test "${lt_cv_ld_reload_flag+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 -$as_echo_n "checking for BSD-compatible nm... " >&6; } -if test "${lt_cv_path_NM+set}" = set; then + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if ${lt_cv_path_NM+:} false; then : $as_echo_n "(cached) " >&6 else if test -n "$NM"; then @@ -3734,27 +4134,593 @@ else done IFS="$lt_save_ifs" done - test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + : ${lt_cv_path_NM=no} fi fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 $as_echo "$lt_cv_path_NM" >&6; } -NM="$lt_cv_path_NM" +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if ${lt_cv_nm_interface+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } -{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 $as_echo_n "checking whether ln -s works... " >&6; } LN_S=$as_ln_s if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } else - { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 $as_echo "no, using $LN_S" >&6; } fi -{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +# find the maximum length of command line arguments +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if ${lt_cv_sys_max_cmd_len+:} false; then : + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } + + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +$as_echo_n "checking how to convert $build file names to $host format... " >&6; } +if ${lt_cv_to_host_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +$as_echo "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } +if ${lt_cv_to_tool_file_cmd+:} false; then : + $as_echo_n "(cached) " >&6 +else + #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +$as_echo "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if ${lt_cv_ld_reload_flag+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test "$GCC" != yes; then + reload_cmds=false + fi + ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 $as_echo_n "checking how to recognize dependent libraries... " >&6; } -if test "${lt_cv_deplibs_check_method+set}" = set; then +if ${lt_cv_deplibs_check_method+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' @@ -3796,21 +4762,29 @@ mingw* | pw32*) # Base MSYS/MinGW do not provide the 'file' command needed by # func_win32_libid shell function, so use a weaker test based on 'objdump', # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. @@ -3829,6 +4803,10 @@ gnu*) lt_cv_deplibs_check_method=pass_all ;; +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in @@ -3837,11 +4815,11 @@ hpux10.20* | hpux11*) lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac @@ -3862,13 +4840,13 @@ irix5* | irix6* | nonstopux*) lt_cv_deplibs_check_method=pass_all ;; -# This must be Linux ELF. -linux* | k*bsd*-gnu) +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' @@ -3881,12 +4859,12 @@ newos6*) lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; -nto-qnx*) - lt_cv_deplibs_check_method=unknown +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all ;; openbsd*) - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' @@ -3905,6 +4883,10 @@ solaris*) lt_cv_deplibs_check_method=pass_all ;; +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + sysv4 | sysv4.3*) case $host_vendor in motorola) @@ -3932,14 +4914,29 @@ sysv4 | sysv4.3*) esac ;; -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) +tpf*) lt_cv_deplibs_check_method=pass_all ;; esac fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 $as_echo "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown @@ -3947,655 +4944,119 @@ test -z "$deplibs_check_method" && deplibs_check_method=unknown -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} -# Allow CC to be a program name with arguments. -compiler=$CC -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval=$enable_libtool_lock; -fi -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 3991 "configure"' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if test "${lt_cv_cc_needs_belf+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - lt_cv_cc_needs_belf=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - lt_cv_cc_needs_belf=no -fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac -need_locks="$enable_libtool_lock" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue + if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi - -rm -f conftest.err conftest.$ac_ext - +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP + done +IFS=$as_save_IFS fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue fi - -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +$as_echo "$DLLTOOL" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest.err conftest.$ac_ext -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <stdlib.h> -#include <stdarg.h> -#include <string.h> -#include <float.h> - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_header_stdc=yes + if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_header_stdc=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <string.h> +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no fi -rm -f conftest* - fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <stdlib.h> - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +$as_echo "$ac_ct_DLLTOOL" >&6; } else - ac_cv_header_stdc=no -fi -rm -f conftest* - + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ctype.h> -#include <stdlib.h> -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : + DLLTOOL=$ac_ct_DLLTOOL + fi else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi - - + DLLTOOL="$ac_cv_prog_DLLTOOL" fi -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF +test -z "$DLLTOOL" && DLLTOOL=dlltool -fi -# On IRIX 5.3, sys/types and inttypes.h are conflicting. @@ -4604,527 +5065,164 @@ fi - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +$as_echo_n "checking how to associate runtime and link libraries... " >&6; } +if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - eval "$as_ac_Header=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_Header=no" -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if test `eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi + lt_cv_sharedlib_from_linklib_cmd='unknown' -done - - - -for ac_header in dlfcn.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_compiler=no fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ----------------------------------------------- ## -## Report this to trustedbsd-audit@TrustesdBSD.org ## -## ----------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi -if test `eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF -fi -done -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -if test -z "$CXX"; then - if test -n "$CCC"; then - CXX=$CCC - else - if test -n "$ac_tool_prefix"; then - for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +if test -n "$ac_tool_prefix"; then + for ac_prog in ar do # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CXX+set}" = set; then +if ${ac_cv_prog_AR+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -CXX=$ac_cv_prog_CXX -if test -n "$CXX"; then - { $as_echo "$as_me:$LINENO: result: $CXX" >&5 -$as_echo "$CXX" >&6; } +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - test -n "$CXX" && break + test -n "$AR" && break done fi -if test -z "$CXX"; then - ac_ct_CXX=$CXX - for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then +if ${ac_cv_prog_ac_ct_AR+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_CXX"; then - ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CXX="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -ac_ct_CXX=$ac_cv_prog_ac_ct_CXX -if test -n "$ac_ct_CXX"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 -$as_echo "$ac_ct_CXX" >&6; } +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - test -n "$ac_ct_CXX" && break + test -n "$ac_ct_AR" && break done - if test "x$ac_ct_CXX" = x; then - CXX="g++" + if test "x$ac_ct_AR" = x; then + AR="false" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - CXX=$ac_ct_CXX + AR=$ac_ct_AR fi fi - fi -fi -# Provide some information about the compiler. -$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } +: ${AR=ar} +: ${AR_FLAGS=cru} -{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 -$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } -if test "${ac_cv_cxx_compiler_gnu+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_cxx_compiler_gnu=$ac_compiler_gnu -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 -$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GXX=yes -else - GXX= -fi -ac_test_CXXFLAGS=${CXXFLAGS+set} -ac_save_CXXFLAGS=$CXXFLAGS -{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 -$as_echo_n "checking whether $CXX accepts -g... " >&6; } -if test "${ac_cv_prog_cxx_g+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_save_cxx_werror_flag=$ac_cxx_werror_flag - ac_cxx_werror_flag=yes - ac_cv_prog_cxx_g=no - CXXFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cxx_g=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - CXXFLAGS="" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +$as_echo_n "checking for archiver @FILE support... " >&6; } +if ${lt_cv_ar_at_file+:} false; then : + $as_echo_n "(cached) " >&6 else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cxx_werror_flag=$ac_save_cxx_werror_flag - CXXFLAGS="-g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -5135,703 +5233,363 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_cxx_g=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - +if ac_fn_c_try_compile "$LINENO"; then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +$as_echo "$lt_cv_ar_at_file" >&6; } -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cxx_werror_flag=$ac_save_cxx_werror_flag -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 -$as_echo "$ac_cv_prog_cxx_g" >&6; } -if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS=$ac_save_CXXFLAGS -elif test $ac_cv_prog_cxx_g = yes; then - if test "$GXX" = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-g" - fi +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= else - if test "$GXX" = yes; then - CXXFLAGS="-O2" - else - CXXFLAGS= - fi + archiver_list_spec=$lt_cv_ar_at_file fi -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - - -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 -$as_echo_n "checking how to run the C++ preprocessor... " >&6; } -if test -z "$CXXCPP"; then - if test "${ac_cv_prog_CXXCPP+set}" = set; then - $as_echo_n "(cached) " >&6 -else - # Double quotes because CXXCPP needs to be expanded - for CXXCPP in "$CXX -E" "/lib/cpp" - do - ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - done - ac_cv_prog_CXXCPP=$CXXCPP fi - CXXCPP=$ac_cv_prog_CXXCPP +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 else - ac_cv_prog_CXXCPP=$CXXCPP -fi -{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5 -$as_echo "$CXXCPP" >&6; } -ac_preproc_ok=false -for ac_cxx_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then - : + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS - # Broken: fails on valid input. -continue +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || - test ! -s conftest.err - }; then - # Broken: success on invalid input. -continue + STRIP=$ac_ct_STRIP + fi else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break + STRIP="$ac_cv_prog_STRIP" fi -rm -f conftest.err conftest.$ac_ext +test -z "$STRIP" && STRIP=: + -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&5 -$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi -ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu -fi -ac_ext=f -ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' -ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_f77_compiler_gnu if test -n "$ac_tool_prefix"; then - for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_F77+set}" = set; then +if ${ac_cv_prog_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$F77"; then - ac_cv_prog_F77="$F77" # Let the user override the test. + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_F77="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -F77=$ac_cv_prog_F77 -if test -n "$F77"; then - { $as_echo "$as_me:$LINENO: result: $F77" >&5 -$as_echo "$F77" >&6; } +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - test -n "$F77" && break - done fi -if test -z "$F77"; then - ac_ct_F77=$F77 - for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_F77+set}" = set; then +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_F77"; then - ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_F77="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -ac_ct_F77=$ac_cv_prog_ac_ct_F77 -if test -n "$ac_ct_F77"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 -$as_echo "$ac_ct_F77" >&6; } +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - - test -n "$ac_ct_F77" && break -done - - if test "x$ac_ct_F77" = x; then - F77="" + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - F77=$ac_ct_F77 + RANLIB=$ac_ct_RANLIB fi +else + RANLIB="$ac_cv_prog_RANLIB" fi +test -z "$RANLIB" && RANLIB=: -# Provide some information about the compiler. -$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -{ (ac_try="$ac_compiler --version >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler --version >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -v >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -v >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (ac_try="$ac_compiler -V >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compiler -V >&5") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -rm -f a.out - -# If we don't use `.F' as extension, the preprocessor is not run on the -# input file. (Note that this only needs to work for GNU compilers.) -ac_save_ext=$ac_ext -ac_ext=F -{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 -$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; } -if test "${ac_cv_f77_compiler_gnu+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF - program main -#ifndef __GNUC__ - choke me -#endif - end -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_compiler_gnu=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_f77_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 -$as_echo "$ac_cv_f77_compiler_gnu" >&6; } -ac_ext=$ac_save_ext -ac_test_FFLAGS=${FFLAGS+set} -ac_save_FFLAGS=$FFLAGS -FFLAGS= -{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 -$as_echo_n "checking whether $F77 accepts -g... " >&6; } -if test "${ac_cv_prog_f77_g+set}" = set; then - $as_echo_n "(cached) " >&6 -else - FFLAGS=-g -cat >conftest.$ac_ext <<_ACEOF - program main - end -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_prog_f77_g=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_cv_prog_f77_g=no +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 -$as_echo "$ac_cv_prog_f77_g" >&6; } -if test "$ac_test_FFLAGS" = set; then - FFLAGS=$ac_save_FFLAGS -elif test $ac_cv_prog_f77_g = yes; then - if test "x$ac_cv_f77_compiler_gnu" = xyes; then - FFLAGS="-g -O2" - else - FFLAGS="-g" - fi + + + + + + + + + + + + + + + + + + + + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 else - if test "x$ac_cv_f77_compiler_gnu" = xyes; then - FFLAGS="-O2" - else - FFLAGS= + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi -fi +done + done +IFS=$as_save_IFS -if test $ac_compiler_gnu = yes; then - G77=yes +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } else - G77= + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + test -n "$AWK" && break +done + + + + + + -# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -# find the maximum length of command line arguments -{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if test "${lt_cv_sys_max_cmd_len+set}" = set; then - $as_echo_n "(cached) " >&6 -else - i=0 - teststring="ABCD" - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - cygwin* | mingw*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ - = "XX$teststring") >/dev/null 2>&1 && - new_result=`expr "X$teststring" : ".*" 2>&1` && - lt_cv_sys_max_cmd_len=$new_result && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - teststring= - # Add a significant safety factor because C++ compilers can tack on massive - # amounts of additional arguments before passing them to the linker. - # It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -fi -if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -else - { $as_echo "$as_me:$LINENO: result: none" >&5 -$as_echo "none" >&6; } -fi +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} +# Allow CC to be a program name with arguments. +compiler=$CC # Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 $as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then +if ${lt_cv_sys_global_symbol_pipe+:} false; then : $as_echo_n "(cached) " >&6 else @@ -5844,33 +5602,18 @@ symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' -# Transform an extracted symbol line into a proper C declaration -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; -cygwin* | mingw* | pw32*) +cygwin* | mingw* | pw32* | cegcc*) symcode='[ABCDGISTW]' ;; -hpux*) # Its linker distinguishes data from code symbols +hpux*) if test "$host_cpu" = ia64; then symcode='[ABCDEGRST]' fi - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - ;; -linux* | k*bsd*-gnu) - if test "$host_cpu" = ia64; then - symcode='[ABCDGIRSTW]' - lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" - fi ;; irix* | nonstopux*) symcode='[BCDEGRST]' @@ -5895,57 +5638,87 @@ sysv4) ;; esac +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) - opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -# Try without a prefix undercore, then with it. +# Try without a prefix underscore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* - cat > conftest.$ac_ext <<EOF + cat > conftest.$ac_ext <<_LT_EOF #ifdef __cplusplus extern "C" { #endif char nm_test_var; -void nm_test_func(){} +void nm_test_func(void); +void nm_test_func(void){} #ifdef __cplusplus } #endif int main(){nm_test_var='a';nm_test_func();return(0);} -EOF +_LT_EOF - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then # Now try to grab the symbols. nlist=conftest.nm - if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 + (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s "$nlist"; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" @@ -5954,57 +5727,71 @@ EOF fi # Make sure that we snagged all the symbols we need. - if grep ' nm_test_var$' "$nlist" >/dev/null; then - if grep ' nm_test_func$' "$nlist" >/dev/null; then - cat <<EOF > conftest.$ac_ext + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + #ifdef __cplusplus extern "C" { #endif -EOF +_LT_EOF # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - cat <<EOF >> conftest.$ac_ext -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif + cat <<_LT_EOF >> conftest.$ac_ext -/* The mapping between symbol names and symbols. */ -const struct { +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { const char *name; - lt_ptr_t address; + void *address; } -lt_preloaded_symbols[] = +lt__PROGRAM__LTX_preloaded_symbols[] = { -EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext - cat <<\EOF >> conftest.$ac_ext - {0, (lt_ptr_t) 0} + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} }; +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + #ifdef __cplusplus } #endif -EOF +_LT_EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext}; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext}; then pipe_works=yes fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS else echo "cannot find nm_test_func in $nlist" >&5 fi @@ -6034,783 +5821,941 @@ if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:$LINENO: result: failed" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 $as_echo "failed" >&6; } else - { $as_echo "$as_me:$LINENO: result: ok" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 $as_echo "ok" >&6; } fi -{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if test "${lt_cv_objdir+set}" = set; then - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' fi -rmdir .libs 2>/dev/null + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +$as_echo_n "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test "${with_sysroot+set}" = set; then : + withval=$with_sysroot; +else + with_sysroot=no fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 +$as_echo "${with_sysroot}" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +$as_echo "${lt_sysroot:-no}" >&6; } -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then : + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* ;; -esac -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; -# Same as above, but do not quote variable references. -double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if ${lt_cv_cc_needs_belf+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' +int +main () +{ -# Constants: -rm="rm -f" + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_cc_needs_belf=yes +else + lt_cv_cc_needs_belf=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu -# Global variables: -default_ofile=libtool -can_build_shared=yes +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -ltmain="$ac_aux_dir/ltmain.sh" -ofile="$default_ofile" -with_gnu_ld="$lt_cv_prog_gnu_ld" +need_locks="$enable_libtool_lock" if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AR+set}" = set; then +if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. + if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:$LINENO: result: $AR" >&5 -$as_echo "$AR" >&6; } +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +$as_echo "$MANIFEST_TOOL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then +if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. + if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_AR" = x; then - AR="false" + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - AR=$ac_ct_AR + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL fi else - AR="$ac_cv_prog_AR" + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" fi -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if ${lt_cv_path_mainfest_tool+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest* +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 +$as_echo "$lt_cv_path_mainfest_tool" >&6; } +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_RANLIB+set}" = set; then +if ${ac_cv_prog_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then +if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - RANLIB=$ac_ct_RANLIB + DSYMUTIL=$ac_ct_DSYMUTIL fi else - RANLIB="$ac_cv_prog_RANLIB" + DSYMUTIL="$ac_cv_prog_DSYMUTIL" fi -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then +if ${ac_cv_prog_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_STRIP" = x; then - STRIP=":" + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - STRIP=$ac_ct_STRIP + NMEDIT=$ac_ct_NMEDIT fi else - STRIP="$ac_cv_prog_STRIP" -fi - - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -test -z "$AS" && AS=as -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$DLLTOOL" && DLLTOOL=dlltool -test -z "$LD" && LD=ld -test -z "$LN_S" && LN_S="ln -s" -test -z "$MAGIC_CMD" && MAGIC_CMD=file -test -z "$NM" && NM=nm -test -z "$SED" && SED=sed -test -z "$OBJDUMP" && OBJDUMP=objdump -test -z "$RANLIB" && RANLIB=: -test -z "$STRIP" && STRIP=: -test -z "$ac_objext" && ac_objext=o - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + NMEDIT="$ac_cv_prog_NMEDIT" fi -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -# Only perform the check for file, if the check method requires it -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi +IFS=$as_save_IFS -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:$LINENO: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_LIPO+:} false; then : $as_echo_n "(cached) " >&6 else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -EOF - fi ;; - esac - fi - break - fi + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi +IFS=$as_save_IFS -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi + if test "x$ac_ct_LIPO" = x; then + LIPO=":" else - MAGIC_CMD=: + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO fi +else + LIPO="$ac_cv_prog_LIPO" fi - fi - ;; -esac - - - case $host_os in - rhapsody* | darwin*) if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_DSYMUTIL+set}" = set; then +if ${ac_cv_prog_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then +if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - DSYMUTIL=$ac_ct_DSYMUTIL + OTOOL=$ac_ct_OTOOL fi else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" + OTOOL="$ac_cv_prog_OTOOL" fi if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_NMEDIT+set}" = set; then +if ${ac_cv_prog_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then +if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi done -done + done IFS=$as_save_IFS fi fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" else case $cross_compiling:$ac_tool_warned in yes:) -{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - NMEDIT=$ac_ct_NMEDIT + OTOOL64=$ac_ct_OTOOL64 fi else - NMEDIT="$ac_cv_prog_NMEDIT" + OTOOL64="$ac_cv_prog_OTOOL64" fi - { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 $as_echo_n "checking for -single_module linker flag... " >&6; } -if test "${lt_cv_apple_cc_single_mod+set}" = set; then +if ${lt_cv_apple_cc_single_mod+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_apple_cc_single_mod=no if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - echo "int foo(void){return 1;}" > conftest.c - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib ${wl}-single_module conftest.c - if test -f libconftest.dylib; then - lt_cv_apple_cc_single_mod=yes - rm -rf libconftest.dylib* - fi - rm conftest.c + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* fi fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } - { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if test "${lt_cv_ld_exported_symbols_list+set}" = set; then +if ${lt_cv_ld_exported_symbols_list+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_ld_exported_symbols_list=no save_LDFLAGS=$LDFLAGS echo "_main" > conftest.sym LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -6821,59 +6766,69 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : lt_cv_ld_exported_symbols_list=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + lt_cv_ld_exported_symbols_list=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" - lt_cv_ld_exported_symbols_list=no fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +$as_echo_n "checking for -force_load linker flag... " >&6; } +if ${lt_cv_ld_force_load+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR cru libconftest.a conftest.o" >&5 + $AR cru libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +$as_echo "$lt_cv_ld_force_load" >&6; } case $host_os in - rhapsody* | darwin1.[0123]) + rhapsody* | darwin1.[012]) _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on # if running on 10.5 or later, the deployment target defaults # to the OS version, if on x86, and 10.4, the deployment # target defaults to 10.4. Don't you love it? case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; esac ;; esac @@ -6883,39 +6838,707 @@ $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } if test "$lt_cv_ld_exported_symbols_list" = "yes"; then _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' else - _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' fi - if test "$DSYMUTIL" != ":"; then - _lt_dsymutil="~$DSYMUTIL \$lib || :" + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' else _lt_dsymutil= fi ;; esac +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext -enable_dlopen=no -enable_win32_dll=no + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then - enableval=$enable_libtool_lock; +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break fi -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <string.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <stdlib.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <ctype.h> +#include <stdlib.h> +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in dlfcn.h +do : + ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_DLFCN_H 1 +_ACEOF + +fi + +done + + + + + +# Set options + + + + enable_dlopen=no + + + enable_win32_dll=no + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi + + + + + + + + # Check whether --with-pic was given. -if test "${with_pic+set}" = set; then - withval=$with_pic; pic_mode="$withval" +if test "${with_pic+set}" = set; then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac else pic_mode=default fi + test -z "$pic_mode" && pic_mode=default + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if ${lt_cv_objdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if ${lt_cv_path_MAGIC_CMD+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + # Use C for the default configuration in the libtool script -tagname= + lt_save_CC="$CC" ac_ext=c ac_cpp='$CPP $CPPFLAGS' @@ -6938,6 +7561,11 @@ lt_simple_compile_test_code="int some_variable = 0;" lt_simple_link_test_code='int main(){return(0);}' + + + + + # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} @@ -6947,35 +7575,43 @@ LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC # save warnings/boilerplate of simple test code ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* +$RM conftest* ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* +$RM -r conftest* +if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag=' -fno-builtin' - + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then +if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext + ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-fno-rtti -fno-exceptions" # Insert the option either (1) after the last *FLAGS variable, or @@ -6987,24 +7623,24 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6990: $lt_compile\"" >&5) + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6994: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_rtti_exceptions=yes fi fi - $rm conftest* + $RM conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 $as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then @@ -7015,12 +7651,15 @@ fi fi -lt_prog_compiler_wl= + + + + + + lt_prog_compiler_wl= lt_prog_compiler_pic= lt_prog_compiler_static= -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } if test "$GCC" = yes; then lt_prog_compiler_wl='-Wl,' @@ -7036,17 +7675,25 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } ;; amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; - mingw* | cygwin* | pw32* | os2*) + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style @@ -7060,6 +7707,26 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } lt_prog_compiler_pic='-fno-common' ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + interix[3-9]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. @@ -7072,29 +7739,31 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } enable_shared=no ;; + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + sysv4*MP*) if test -d /usr/nec; then lt_prog_compiler_pic=-Kconform_pic fi ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - *) lt_prog_compiler_pic='-fPIC' ;; esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in @@ -7107,18 +7776,8 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' fi ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic='-qnocommon' - lt_prog_compiler_wl='-Wl,' - ;; - esac - ;; - mingw* | cygwin* | pw32* | os2*) + mingw* | cygwin* | pw32* | os2* | cegcc*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_prog_compiler_pic='-DDLL_EXPORT' @@ -7146,19 +7805,34 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } lt_prog_compiler_static='-non_shared' ;; - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - linux* | k*bsd*-gnu) + linux* | k*bsd*-gnu | kopensolaris*-gnu) case $cc_basename in - icc* | ecc*) + # old Intel for x86_64 which still supported -KPIC. + ecc*) lt_prog_compiler_wl='-Wl,' lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-static' ;; - pgcc* | pgf77* | pgf90* | pgf95*) + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) lt_prog_compiler_wl='-Wl,' @@ -7170,25 +7844,57 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } # All Alpha code is PIC. lt_prog_compiler_static='-non_shared' ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; *) - case `$CC -V 2>&1 | sed 5q` in + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' ;; esac ;; esac ;; + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) lt_prog_compiler_wl='-Wl,' # All OSF/1 code is PIC. @@ -7203,7 +7909,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' case $cc_basename in - f77* | f90* | f95*) + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) lt_prog_compiler_wl='-Qoption ld ';; *) lt_prog_compiler_wl='-Wl,';; @@ -7251,21 +7957,38 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; } esac fi -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 -$as_echo "$lt_prog_compiler_pic" >&6; } +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } +if ${lt_cv_prog_compiler_pic+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic=$lt_prog_compiler_pic +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +$as_echo "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic # # Check to make sure the PIC flag actually works. # if test -n "$lt_prog_compiler_pic"; then - -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 $as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if test "${lt_cv_prog_compiler_pic_works+set}" = set; then +if ${lt_cv_prog_compiler_pic_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext + ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$lt_prog_compiler_pic -DPIC" # Insert the option either (1) after the last *FLAGS variable, or @@ -7277,24 +8000,24 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7280: $lt_compile\"" >&5) + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:7284: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_pic_works=yes fi fi - $rm conftest* + $RM conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 $as_echo "$lt_cv_prog_compiler_pic_works" >&6; } if test x"$lt_cv_prog_compiler_pic_works" = xyes; then @@ -7308,23 +8031,24 @@ else fi fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac + + + + + + + + + + # # Check to make sure the static flag actually works. # wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 $as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_cv_prog_compiler_static_works+set}" = set; then +if ${lt_cv_prog_compiler_static_works+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_static_works=no @@ -7337,7 +8061,7 @@ else if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then lt_cv_prog_compiler_static_works=yes @@ -7346,11 +8070,11 @@ else lt_cv_prog_compiler_static_works=yes fi fi - $rm -r conftest* + $RM -r conftest* LDFLAGS="$save_LDFLAGS" fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 $as_echo "$lt_cv_prog_compiler_static_works" >&6; } if test x"$lt_cv_prog_compiler_static_works" = xyes; then @@ -7360,13 +8084,73 @@ else fi -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if ${lt_cv_prog_compiler_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 $as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o+set}" = set; then +if ${lt_cv_prog_compiler_c_o+:} false; then : $as_echo_n "(cached) " >&6 else lt_cv_prog_compiler_c_o=no - $rm -r conftest 2>/dev/null + $RM -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out @@ -7381,51 +8165,53 @@ else -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7384: $lt_compile\"" >&5) + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:7388: \$? = $ac_status" >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then lt_cv_prog_compiler_c_o=yes fi fi chmod u+w . 2>&5 - $rm conftest* + $RM conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out cd .. - rmdir conftest - $rm conftest* + $RM -r conftest + $RM conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 $as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + hard_links="nottested" if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 $as_echo_n "checking if we can lock with hard links... " >&6; } hard_links=yes - $rm conftest* + $RM conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 $as_echo "$hard_links" >&6; } if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 $as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} need_locks=warn fi @@ -7433,31 +8219,38 @@ else need_locks=no fi -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 $as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } runpath_var= allow_undefined_flag= - enable_shared_with_static_runtimes=no + always_export_symbols=no archive_cmds= archive_expsym_cmds= - old_archive_From_new_cmds= - old_archive_from_expsyms_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no export_dynamic_flag_spec= - whole_archive_flag_spec= - thread_safe_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= hardcode_libdir_separator= - hardcode_direct=no hardcode_minus_L=no hardcode_shlibpath_var=unsupported + inherit_rpath=no link_all_deplibs=unknown - hardcode_automatic=no module_cmds= module_expsym_cmds= - always_export_symbols=no - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= @@ -7473,19 +8266,9 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie # preloaded symbol tables. # Exclude shared library initialization/finalization symbols. extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` case $host_os in - cygwin* | mingw* | pw32*) + cygwin* | mingw* | pw32* | cegcc*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. @@ -7503,7 +8286,33 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` esac ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' @@ -7511,16 +8320,17 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= fi supports_anon_versioning=no - case `$LD -v 2>/dev/null` in + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... @@ -7534,34 +8344,36 @@ cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then ld_shlibs=no - cat <<EOF 1>&2 + cat <<_LT_EOF 1>&2 -*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** Warning: the GNU linker, at least up to release 2.19, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. -EOF +_LT_EOF fi ;; amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - - # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs=no + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac ;; beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach <jrb3@best.com> says some releases of gcc # support --undefined. This deserves some investigation. FIXME @@ -7571,16 +8383,18 @@ EOF fi ;; - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, # as there is no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='${wl}--export-all-symbols' allow_undefined_flag=unsupported always_export_symbols=no enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... @@ -7596,6 +8410,11 @@ EOF fi ;; + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + link_all_deplibs=yes + ;; + interix[3-9]*) hardcode_direct=no hardcode_shlibpath_var=no @@ -7611,60 +8430,94 @@ EOF archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; - *) - tmp_sharedflag='-shared' ;; esac archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test $supports_anon_versioning = yes; then - archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac else - ld_shlibs=no + ld_shlibs=no fi ;; netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then ld_shlibs=no - cat <<EOF 1>&2 + cat <<_LT_EOF 1>&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool @@ -7673,10 +8526,10 @@ EOF *** your PATH or compiler configuration so that the native linker is *** used, and then restart. -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -7698,10 +8551,14 @@ EOF _LT_EOF ;; *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -7717,9 +8574,9 @@ _LT_EOF ;; *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi @@ -7759,10 +8616,12 @@ _LT_EOF else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no @@ -7771,10 +8630,10 @@ _LT_EOF # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi done ;; esac @@ -7791,28 +8650,30 @@ _LT_EOF archive_cmds='' hardcode_direct=yes + hardcode_direct_absolute=yes hardcode_libdir_separator=':' link_all_deplibs=yes + file_list_spec='${wl}-f,' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null then - # We have reworked collect2 - : + # We have reworked collect2 + : else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= fi ;; esac @@ -7823,8 +8684,8 @@ _LT_EOF else # not using gcc if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then @@ -7835,6 +8696,7 @@ _LT_EOF fi fi + export_dynamic_flag_spec='${wl}-bexpall' # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. always_export_symbols=yes @@ -7842,12 +8704,15 @@ _LT_EOF # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -7858,66 +8723,49 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_link "$LINENO"; then : + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + aix_libpath=$lt_cv_aix_libpath_ +fi - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + # Determine the default libpath from the value encoded in an + # empty executable. + if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + if ${lt_cv_aix_libpath_+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int @@ -7928,59 +8776,44 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_link "$LINENO"; then : + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_="/usr/lib:/lib" + fi fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + aix_libpath=$lt_cv_aix_libpath_ +fi hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. no_undefined_flag=' ${wl}-bernotok' allow_undefined_flag=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi archive_cmds_need_lc=yes # This is similar to how AIX traditionally builds its shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' @@ -7989,85 +8822,119 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; amigaos*) - archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - # see comment about different semantics on the GNU ld section - ld_shlibs=no + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac ;; bsdi[45]*) export_dynamic_flag_spec=-rdynamic ;; - cygwin* | mingw* | pw32*) + cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes=yes + case $cc_basename in + cl*) + # Native MSVC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac ;; darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='' - link_all_deplibs=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs=no - ;; - esac - fi + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + + else + ld_shlibs=no + fi + ;; dgux*) @@ -8076,10 +8943,6 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_shlibpath_var=no ;; - freebsd1*) - ld_shlibs=no - ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little @@ -8092,7 +8955,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) + freebsd2.*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes @@ -8101,7 +8964,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no @@ -8109,9 +8972,9 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hpux9*) if test "$GCC" = yes; then - archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else - archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: @@ -8124,18 +8987,17 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: - hardcode_direct=yes + hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. hardcode_minus_L=yes @@ -8143,16 +9005,16 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ;; hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then + if test "$GCC" = yes && test "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else @@ -8164,7 +9026,46 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +$as_echo_n "checking if $CC understands -b... " >&6; } +if ${lt_cv_prog_compiler__b+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler__b=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +$as_echo "$lt_cv_prog_compiler__b" >&6; } + +if test x"$lt_cv_prog_compiler__b" = xyes; then + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + ;; esac fi @@ -8174,12 +9075,12 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi case $host_cpu in hppa*64*|ia64*) - hardcode_libdir_flag_spec_ld='+b $libdir' hardcode_direct=no hardcode_shlibpath_var=no ;; *) hardcode_direct=yes + hardcode_direct_absolute=yes export_dynamic_flag_spec='${wl}-E' # hardcode_minus_L: Not really in the search PATH, @@ -8192,18 +9093,49 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if ${lt_cv_irix_exported_symbol+:} false; then : + $as_echo_n "(cached) " >&6 +else + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + lt_cv_irix_exported_symbol=yes +else + lt_cv_irix_exported_symbol=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +$as_echo "$lt_cv_irix_exported_symbol" >&6; } + if test "$lt_cv_irix_exported_symbol" = yes; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi else - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld='-rpath $libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' fi + archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: + inherit_rpath=yes link_all_deplibs=yes ;; netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF @@ -8221,11 +9153,15 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_shlibpath_var=no ;; + *nto* | *qnx*) + ;; + openbsd*) if test -f /usr/libexec/ld.so; then hardcode_direct=yes hardcode_shlibpath_var=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' @@ -8241,7 +9177,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac - fi + fi else ld_shlibs=no fi @@ -8251,18 +9187,19 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported - archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' fi + archive_cmds_need_lc='no' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; @@ -8270,32 +9207,43 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' # Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi + archive_cmds_need_lc='no' hardcode_libdir_separator=: ;; solaris*) - no_undefined_flag=' -z text' + no_undefined_flag=' -z defs' if test "$GCC" = yes; then wlarc='${wl}' - archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' else - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac fi hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no @@ -8305,7 +9253,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) + # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else @@ -8394,18 +9342,18 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi allow_undefined_flag='${wl}-z,nodefs' archive_cmds_need_lc=no hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_flag_spec='${wl}-R,$libdir' hardcode_libdir_separator=':' link_all_deplibs=yes export_dynamic_flag_spec='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else - archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; @@ -8419,12 +9367,36 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ld_shlibs=no ;; esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac + fi fi -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 $as_echo "$ld_shlibs" >&6; } test "$ld_shlibs" = no && can_build_shared=no +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + # # Do we need to explicitly link libc? # @@ -8442,83 +9414,234 @@ x|xyes) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext +if ${lt_cv_archive_cmds_need_lc+:} false; then : + $as_echo_n "(cached) " >&6 +else + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 (eval $ac_compile) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc=no - else - archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 -$as_echo "$archive_cmds_need_lc" >&6; } + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc ;; esac fi ;; esac -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= @@ -8531,7 +9654,7 @@ if test "$GCC" = yes; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done - lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; @@ -8551,10 +9674,29 @@ BEGIN {RS=" "; FS="/|\n";} { if (lt_foo != "") { lt_freq[lt_foo]++; } if (lt_freq[lt_foo] == 1) { print lt_foo; } }'` - sys_lib_search_path_spec=`echo $lt_search_path_spec` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([A-Za-z]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" need_lib_prefix=unknown hardcode_into_libs=no @@ -8564,7 +9706,7 @@ need_version=unknown case $host_os in aix3*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH @@ -8573,7 +9715,7 @@ aix3*) ;; aix[4-9]*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes @@ -8591,7 +9733,7 @@ aix[4-9]*) aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then : else can_build_shared=no @@ -8617,9 +9759,18 @@ aix[4-9]*) ;; amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac ;; beos*) @@ -8629,7 +9780,7 @@ beos*) ;; bsdi[45]*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' @@ -8642,61 +9793,112 @@ bsdi[45]*) # libtool to hard-code these into programs ;; -cygwin* | mingw* | pw32*) +cygwin* | mingw* | pw32* | cegcc*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) + case $GCC,$cc_basename in + yes,*) + # gcc library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ - $rm \$dlpath' + $RM \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" ;; - mingw*) + mingw* | cegcc*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ;; esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' ;; *) + # Assume MSVC wrapper library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' ;; esac - dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; @@ -8706,7 +9908,7 @@ darwin* | rhapsody*) version_type=darwin need_lib_prefix=no need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH @@ -8717,7 +9919,7 @@ darwin* | rhapsody*) ;; dgux*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' @@ -8725,10 +9927,6 @@ dgux*) shlibpath_var=LD_LIBRARY_PATH ;; -freebsd1*) - dynamic_linker=no - ;; - freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. @@ -8736,7 +9934,7 @@ freebsd* | dragonfly*) objformat=`/usr/bin/objformat` else case $host_os in - freebsd[123]*) objformat=aout ;; + freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi @@ -8754,7 +9952,7 @@ freebsd* | dragonfly*) esac shlibpath_var=LD_LIBRARY_PATH case $host_os in - freebsd2*) + freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) @@ -8774,12 +9972,26 @@ freebsd* | dragonfly*) ;; gnu*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' hardcode_into_libs=yes ;; @@ -8805,18 +10017,18 @@ hpux9* | hpux10* | hpux11*) fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH @@ -8825,12 +10037,14 @@ hpux9* | hpux10* | hpux11*) soname_spec='${libname}${release}${shared_ext}$major' ;; esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 ;; interix[3-9]*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' @@ -8846,7 +10060,7 @@ irix5* | irix6* | nonstopux*) nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; @@ -8883,9 +10097,9 @@ linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -8893,6 +10107,41 @@ linux* | k*bsd*-gnu) finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if ${lt_cv_shlibpath_overrides_runpath+:} false; then : + $as_echo_n "(cached) " >&6 +else + lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. @@ -8900,7 +10149,7 @@ linux* | k*bsd*-gnu) # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi @@ -8917,7 +10166,7 @@ netbsd*) version_type=sunos need_lib_prefix=no need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' @@ -8932,20 +10181,22 @@ netbsd*) ;; newsos6) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; -nto-qnx*) - version_type=linux +*nto* | *qnx*) + version_type=qnx need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' ;; openbsd*) @@ -8954,13 +10205,13 @@ openbsd*) need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no @@ -8999,7 +10250,7 @@ rdos*) ;; solaris*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -9024,7 +10275,7 @@ sunos4*) ;; sysv4 | sysv4.3*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH @@ -9032,7 +10283,6 @@ sysv4 | sysv4.3*) sni) shlibpath_overrides_runpath=no need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) @@ -9049,7 +10299,7 @@ sysv4 | sysv4.3*) sysv4*MP*) if test -d /usr/nec ;then - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH @@ -9063,13 +10313,12 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" @@ -9079,8 +10328,19 @@ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) sys_lib_dlsearch_path_spec='/usr/lib' ;; +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + uts4*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH @@ -9090,43 +10350,126 @@ uts4*) dynamic_linker=no ;; esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 $as_echo "$dynamic_linker" >&6; } test "$dynamic_linker" = no && can_build_shared=no -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi -sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" fi -sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 $as_echo_n "checking how to hardcode library paths into programs... " >&6; } hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || \ - test -n "$runpath_var" || \ +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || test "X$hardcode_automatic" = "Xyes" ; then - # We can hardcode non-existant directories. + # We can hardcode non-existent directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink @@ -9139,10 +10482,11 @@ else # directories. hardcode_action=unsupported fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 $as_echo "$hardcode_action" >&6; } -if test "$hardcode_action" = relink; then +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || @@ -9151,37 +10495,12 @@ elif test "$shlibpath_overrides_runpath" = yes || enable_fast_install=needless fi -striplib= -old_striplib= -{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - ;; - *) - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi -if test "x$enable_dlopen" != xyes; then + + + + + if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown @@ -9196,30 +10515,26 @@ else lt_cv_dlopen_self=yes ;; - mingw* | pw32*) + mingw* | pw32* | cegcc*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= - ;; + ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= - ;; + ;; darwin*) # if libdl is installed we need to link against it - { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then +if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -9237,43 +10552,18 @@ return dlopen (); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dl_dlopen=no + ac_cv_lib_dl_dlopen=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test $ac_cv_lib_dl_dlopen = yes; then +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else @@ -9283,109 +10573,21 @@ else fi - ;; + ;; *) - { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 -$as_echo_n "checking for shl_load... " >&6; } -if test "${ac_cv_func_shl_load+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define shl_load innocuous_shl_load - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char shl_load (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef shl_load - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_shl_load || defined __stub___shl_load -choke me -#endif - -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_shl_load=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_shl_load=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 -$as_echo "$ac_cv_func_shl_load" >&6; } -if test $ac_cv_func_shl_load = yes; then + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes; then : lt_cv_dlopen="shl_load" else - { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 $as_echo_n "checking for shl_load in -ldld... " >&6; } -if test "${ac_cv_lib_dld_shl_load+set}" = set; then +if ${ac_cv_lib_dld_shl_load+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -9403,145 +10605,32 @@ return shl_load (); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_shl_load=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dld_shl_load=no + ac_cv_lib_dld_shl_load=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 $as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test $ac_cv_lib_dld_shl_load = yes; then +if test "x$ac_cv_lib_dld_shl_load" = xyes; then : lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" else - { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 -$as_echo_n "checking for dlopen... " >&6; } -if test "${ac_cv_func_dlopen+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define dlopen innocuous_dlopen - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char dlopen (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef dlopen - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_dlopen || defined __stub___dlopen -choke me -#endif - -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_func_dlopen=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_func_dlopen=no -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 -$as_echo "$ac_cv_func_dlopen" >&6; } -if test $ac_cv_func_dlopen = yes; then + ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes; then : lt_cv_dlopen="dlopen" else - { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 $as_echo_n "checking for dlopen in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then +if ${ac_cv_lib_dl_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -9559,57 +10648,28 @@ return dlopen (); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dl_dlopen=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dl_dlopen=no + ac_cv_lib_dl_dlopen=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 $as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test $ac_cv_lib_dl_dlopen = yes; then +if test "x$ac_cv_lib_dl_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else - { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 $as_echo_n "checking for dlopen in -lsvld... " >&6; } -if test "${ac_cv_lib_svld_dlopen+set}" = set; then +if ${ac_cv_lib_svld_dlopen+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lsvld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -9627,57 +10687,28 @@ return dlopen (); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_svld_dlopen=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_svld_dlopen=no + ac_cv_lib_svld_dlopen=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 $as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test $ac_cv_lib_svld_dlopen = yes; then +if test "x$ac_cv_lib_svld_dlopen" = xyes; then : lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else - { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 $as_echo_n "checking for dld_link in -ldld... " >&6; } -if test "${ac_cv_lib_dld_dld_link+set}" = set; then +if ${ac_cv_lib_dld_dld_link+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -9695,43 +10726,18 @@ return dld_link (); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_dld_dld_link=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_dld_dld_link=no + ac_cv_lib_dld_dld_link=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 $as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test $ac_cv_lib_dld_dld_link = yes; then +if test "x$ac_cv_lib_dld_dld_link" = xyes; then : lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" fi @@ -9770,9 +10776,9 @@ fi save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" - { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 $as_echo_n "checking whether a program can dlopen itself... " >&6; } -if test "${lt_cv_dlopen_self+set}" = set; then +if ${lt_cv_dlopen_self+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : @@ -9780,8 +10786,8 @@ else else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<EOF -#line 9784 "configure" + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -9822,11 +10828,13 @@ else # endif #endif -#ifdef __cplusplus -extern "C" void exit (int); +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); #endif -void fnord() { int i=42;} +int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -9835,20 +10843,24 @@ int main () if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } /* dlclose (self); */ } else puts (dlerror ()); - exit (status); + return status; } -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -9865,14 +10877,14 @@ rm -fr conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 $as_echo "$lt_cv_dlopen_self" >&6; } if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 $as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if test "${lt_cv_dlopen_self_static+set}" = set; then +if ${lt_cv_dlopen_self_static+:} false; then : $as_echo_n "(cached) " >&6 else if test "$cross_compiling" = yes; then : @@ -9880,8 +10892,8 @@ else else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<EOF -#line 9884 "configure" + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" #include "confdefs.h" #if HAVE_DLFCN_H @@ -9922,11 +10934,13 @@ else # endif #endif -#ifdef __cplusplus -extern "C" void exit (int); +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); #endif -void fnord() { int i=42;} +int fnord () { return 42; } int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); @@ -9935,20 +10949,24 @@ int main () if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } /* dlclose (self); */ } else puts (dlerror ()); - exit (status); + return status; } -EOF - if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 (eval $ac_link) 2>&5 ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&5 2>/dev/null lt_status=$? case x$lt_status in @@ -9965,7 +10983,7 @@ rm -fr conftest* fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 $as_echo "$lt_cv_dlopen_self_static" >&6; } fi @@ -9987,9469 +11005,389 @@ $as_echo "$lt_cv_dlopen_self_static" >&6; } fi -# Report which library types will actually be built -{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - -{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - -aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - -{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler \ - CC \ - LD \ - lt_prog_compiler_wl \ - lt_prog_compiler_pic \ - lt_prog_compiler_static \ - lt_prog_compiler_no_builtin_flag \ - export_dynamic_flag_spec \ - thread_safe_flag_spec \ - whole_archive_flag_spec \ - enable_shared_with_static_runtimes \ - old_archive_cmds \ - old_archive_from_new_cmds \ - predep_objects \ - postdep_objects \ - predeps \ - postdeps \ - compiler_lib_search_path \ - compiler_lib_search_dirs \ - archive_cmds \ - archive_expsym_cmds \ - postinstall_cmds \ - postuninstall_cmds \ - old_archive_from_expsyms_cmds \ - allow_undefined_flag \ - no_undefined_flag \ - export_symbols_cmds \ - hardcode_libdir_flag_spec \ - hardcode_libdir_flag_spec_ld \ - hardcode_libdir_separator \ - hardcode_automatic \ - module_cmds \ - module_expsym_cmds \ - lt_cv_prog_compiler_c_o \ - fix_srcfile_path \ - exclude_expsyms \ - include_expsyms; do - - case $var in - old_archive_cmds | \ - old_archive_from_new_cmds | \ - archive_cmds | \ - archive_expsym_cmds | \ - module_cmds | \ - module_expsym_cmds | \ - old_archive_from_expsyms_cmds | \ - export_symbols_cmds | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="${ofile}T" - trap "$rm \"$cfgfile\"; exit 1" 1 2 15 - $rm -f "$cfgfile" - { $as_echo "$as_me:$LINENO: creating $ofile" >&5 -$as_echo "$as_me: creating $ofile" >&6;} - - cat <<__EOF__ >> "$cfgfile" -#! $SHELL - -# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. -# -# This file is part of GNU Libtool: -# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="$SED -e 1s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# The names of the tagged configurations supported by this script. -available_tags= - -# ### BEGIN LIBTOOL CONFIG - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU C compiler? -with_gcc=$GCC - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_LD - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version -# Whether dlopen is supported. -dlopen_support=$enable_dlopen -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec -# Library versioning type. -version_type=$version_type -# Format of library name prefix. -libname_spec=$lt_libname_spec -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps - -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# ### END LIBTOOL CONFIG - -__EOF__ - - - case $host_os in - aix3*) - cat <<\EOF >> "$cfgfile" - -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -EOF - ;; - esac - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || \ - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" +striplib= +old_striplib= +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - -# Check whether --with-tags was given. -if test "${with_tags+set}" = set; then - withval=$with_tags; tagnames="$withval" -fi - - -if test -f "$ltmain" && test -n "$tagnames"; then - if test ! -f "${ofile}"; then - { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 -$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} - fi - - if test -z "$LTCC"; then - eval "`$SHELL ${ofile} --config | grep '^LTCC='`" - if test -z "$LTCC"; then - { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 -$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } else - { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 -$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} - fi - fi - if test -z "$LTCFLAGS"; then - eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" - fi - - # Extract list of available tagged configurations in $ofile. - # Note that this assumes the entire list is on one line. - available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` - - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for tagname in $tagnames; do - IFS="$lt_save_ifs" - # Check whether tagname contains only valid characters - case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in - "") ;; - *) { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 -$as_echo "$as_me: error: invalid tag name: $tagname" >&2;} - { (exit 1); exit 1; }; } - ;; - esac - - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null - then - { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 -$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} - { (exit 1); exit 1; }; } - fi - - # Update the list of available tags. - if test -n "$tagname"; then - echo appending configuration tag \"$tagname\" to $ofile - - case $tagname in - CXX) - if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - ac_ext=cpp -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_cxx_compiler_gnu - - - - -archive_cmds_need_lc_CXX=no -allow_undefined_flag_CXX= -always_export_symbols_CXX=no -archive_expsym_cmds_CXX= -export_dynamic_flag_spec_CXX= -hardcode_direct_CXX=no -hardcode_libdir_flag_spec_CXX= -hardcode_libdir_flag_spec_ld_CXX= -hardcode_libdir_separator_CXX= -hardcode_minus_L_CXX=no -hardcode_shlibpath_var_CXX=unsupported -hardcode_automatic_CXX=no -module_cmds_CXX= -module_expsym_cmds_CXX= -link_all_deplibs_CXX=unknown -old_archive_cmds_CXX=$old_archive_cmds -no_undefined_flag_CXX= -whole_archive_flag_spec_CXX= -enable_shared_with_static_runtimes_CXX=no - -# Dependencies to place before and after the object being linked: -predep_objects_CXX= -postdep_objects_CXX= -predeps_CXX= -postdeps_CXX= -compiler_lib_search_path_CXX= -compiler_lib_search_dirs_CXX= - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -objext_CXX=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(int, char *[]) { return(0); }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* - - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_LD=$LD -lt_save_GCC=$GCC -GCC=$GXX -lt_save_with_gnu_ld=$with_gnu_ld -lt_save_path_LD=$lt_cv_path_LD -if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx -else - $as_unset lt_cv_prog_gnu_ld -fi -if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX -else - $as_unset lt_cv_path_LD -fi -test -z "${LDCXX+set}" || LD=$LDCXX -CC=${CXX-"c++"} -compiler=$CC -compiler_CXX=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -# We don't want -fno-exception wen compiling C++ code, so set the -# no_builtin_flag separately -if test "$GXX" = yes; then - lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' -else - lt_prog_compiler_no_builtin_flag_CXX= -fi - -if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if test "${lt_cv_path_LD+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break - ;; - *) - test "$with_gnu_ld" != yes && break - ;; - esac - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - { $as_echo "$as_me:$LINENO: result: $LD" >&5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } -fi -test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 -$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} - { (exit 1); exit 1; }; } -{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if test "${lt_cv_prog_gnu_ld+set}" = set; then - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 </dev/null` in -*GNU* | *'with BFD'*) - lt_cv_prog_gnu_ld=yes - ;; -*) - lt_cv_prog_gnu_ld=no - ;; -esac -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ - grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_CXX= fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - -else - GXX=no - with_gnu_ld=no - wlarc= -fi - -# PORTME: fill in a description of your system's C++ link characteristics -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } -ld_shlibs_CXX=yes -case $host_os in - aix3*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds_CXX='' - hardcode_direct_CXX=yes - hardcode_libdir_separator_CXX=':' - link_all_deplibs_CXX=yes - - if test "$GXX" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct_CXX=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_CXX=yes - hardcode_libdir_flag_spec_CXX='-L$libdir' - hardcode_libdir_separator_CXX= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_CXX=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_CXX='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - - archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_CXX="-z nodefs" - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_cxx_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_CXX=' ${wl}-bernotok' - allow_undefined_flag_CXX=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_CXX='$convenience' - archive_cmds_need_lc_CXX=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_CXX=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_CXX=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_CXX='-L$libdir' - allow_undefined_flag_CXX=unsupported - always_export_symbols_CXX=no - enable_shared_with_static_runtimes_CXX=yes - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_CXX=no - fi - ;; - darwin* | rhapsody*) - archive_cmds_need_lc_CXX=no - hardcode_direct_CXX=no - hardcode_automatic_CXX=yes - hardcode_shlibpath_var_CXX=unsupported - whole_archive_flag_spec_CXX='' - link_all_deplibs_CXX=yes - allow_undefined_flag_CXX="$_lt_dar_allow_undefined" - if test "$GXX" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - if test "$lt_cv_apple_cc_single_mod" != "yes"; then - archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" - fi - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_CXX=no - ;; - esac - fi - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - freebsd[12]*) - # C++ shared libraries reported to be fairly broken before switch to ELF - ld_shlibs_CXX=no - ;; - freebsd-elf*) - archive_cmds_need_lc_CXX=no - ;; - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - ld_shlibs_CXX=yes - ;; - gnu*) - ;; - hpux9*) - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: - export_dynamic_flag_spec_CXX='${wl}-E' - hardcode_direct_CXX=yes - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aCC*) - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - case $host_cpu in - hppa*64*|ia64*) ;; - *) - export_dynamic_flag_spec_CXX='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - ;; - *) - hardcode_direct_CXX=yes - hardcode_minus_L_CXX=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - interix[3-9]*) - hardcode_direct_CXX=no - hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' - fi - fi - link_all_deplibs_CXX=yes - ;; - esac - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - - hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc*) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - archive_cmds_need_lc_CXX=no - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_CXX='${wl}--export-dynamic' - whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - hardcode_libdir_flag_spec_CXX='-R$libdir' - whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - lynxos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - m88k*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - hardcode_libdir_flag_spec_CXX='-R$libdir' - hardcode_direct_CXX=yes - hardcode_shlibpath_var_CXX=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - openbsd2*) - # C++ shared libraries are fairly broken - ld_shlibs_CXX=no - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct_CXX=yes - hardcode_shlibpath_var_CXX=no - archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - export_dynamic_flag_spec_CXX='${wl}-E' - whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd='echo' - else - ld_shlibs_CXX=no - fi - ;; - osf3*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - hardcode_libdir_separator_CXX=: - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' - - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - cxx*) - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' - hardcode_libdir_separator_CXX=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - cxx*) - allow_undefined_flag_CXX=' -expect_unresolved \*' - archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ - $rm $lib.exp' - - hardcode_libdir_flag_spec_CXX='-rpath $libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - - hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_CXX=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' - - else - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - fi - ;; - esac - ;; - psos*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - archive_cmds_need_lc_CXX=yes - no_undefined_flag_CXX=' -zdefs' - archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - hardcode_libdir_flag_spec_CXX='-R$libdir' - hardcode_shlibpath_var_CXX=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' - ;; - esac - link_all_deplibs_CXX=yes - - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - no_undefined_flag_CXX=' ${wl}-z ${wl}defs' - if $CC --version | grep -v '^2\.7' > /dev/null; then - archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" - fi - - hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag_CXX='${wl}-z,text' - archive_cmds_need_lc_CXX=no - hardcode_shlibpath_var_CXX=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - # So that behaviour is only enabled if SCOABSPATH is set to a - # non-empty value in the environment. Most likely only useful for - # creating official distributions of packages. - # This is a hack until libtool officially supports absolute path - # names for shared libraries. - no_undefined_flag_CXX='${wl}-z,text' - allow_undefined_flag_CXX='${wl}-z,nodefs' - archive_cmds_need_lc_CXX=no - hardcode_shlibpath_var_CXX=no - hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator_CXX=':' - link_all_deplibs_CXX=yes - export_dynamic_flag_spec_CXX='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; - esac - ;; - vxworks*) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no ;; *) - # FIXME: insert proper C++ library support - ld_shlibs_CXX=no - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 -$as_echo "$ld_shlibs_CXX" >&6; } -test "$ld_shlibs_CXX" = no && can_build_shared=no - -GCC_CXX="$GXX" -LD_CXX="$LD" - -cat > conftest.$ac_ext <<EOF -class Foo -{ -public: - Foo (void) { a = 0; } -private: - int a; -}; -EOF - -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - # The `*' in the case matches for architectures that use `case' in - # $output_verbose_cmd can trigger glob expansion during the loop - # eval without this substitution. - output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` - - for p in `eval $output_verbose_link_cmd`; do - case $p in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" \ - || test $p = "-R"; then - prev=$p - continue - else - prev= - fi - - if test "$pre_test_object_deps_done" = no; then - case $p in - -L* | -R*) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$compiler_lib_search_path_CXX"; then - compiler_lib_search_path_CXX="${prev}${p}" - else - compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$postdeps_CXX"; then - postdeps_CXX="${prev}${p}" - else - postdeps_CXX="${postdeps_CXX} ${prev}${p}" - fi - fi - ;; - - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test "$pre_test_object_deps_done" = no; then - if test -z "$predep_objects_CXX"; then - predep_objects_CXX="$p" - else - predep_objects_CXX="$predep_objects_CXX $p" - fi - else - if test -z "$postdep_objects_CXX"; then - postdep_objects_CXX="$p" - else - postdep_objects_CXX="$postdep_objects_CXX $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling CXX test program" -fi - -$rm -f confest.$objext - -compiler_lib_search_dirs_CXX= -if test -n "$compiler_lib_search_path_CXX"; then - compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -fi - -# PORTME: override above test on systems where it is broken -case $host_os in -interix[3-9]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - predep_objects_CXX= - postdep_objects_CXX= - postdeps_CXX= - ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - # - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - if test "$solaris_use_stlport4" != yes; then - postdeps_CXX='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - postdeps_CXX='-library=Cstd -library=Crun' - fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } ;; esac - ;; -esac - -case " $postdeps_CXX " in -*" -lc "*) archive_cmds_need_lc_CXX=no ;; -esac - -lt_prog_compiler_wl_CXX= -lt_prog_compiler_pic_CXX= -lt_prog_compiler_static_CXX= - -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } - - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic_CXX='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_CXX='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - lt_prog_compiler_pic_CXX= - ;; - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_CXX=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac - ;; - *) - lt_prog_compiler_pic_CXX='-fPIC' - ;; - esac - else - case $host_os in - aix[4-9]*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_CXX='-Bstatic' - else - lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic_CXX='-qnocommon' - lt_prog_compiler_wl_CXX='-Wl,' - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++*) - lt_prog_compiler_pic_CXX='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - lt_prog_compiler_pic_CXX='+Z' - fi - ;; - aCC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_CXX='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_static_CXX='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - KCC*) - # KAI C++ Compiler - lt_prog_compiler_wl_CXX='--backend -Wl,' - lt_prog_compiler_pic_CXX='-fPIC' - ;; - icpc* | ecpc*) - # Intel C++ - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler. - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-fpic' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - lt_prog_compiler_wl_CXX='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - lt_prog_compiler_pic_CXX='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - lt_prog_compiler_wl_CXX='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - lt_prog_compiler_pic_CXX='-pic' - ;; - cxx*) - # Digital/Compaq C++ - lt_prog_compiler_wl_CXX='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - lt_prog_compiler_pic_CXX= - lt_prog_compiler_static_CXX='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - lt_prog_compiler_wl_CXX='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - lt_prog_compiler_pic_CXX='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - lt_prog_compiler_pic_CXX='-pic' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - lcc*) - # Lucid - lt_prog_compiler_pic_CXX='-pic' - ;; - *) - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - lt_prog_compiler_pic_CXX='-KPIC' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - lt_prog_compiler_wl_CXX='-Wl,' - lt_prog_compiler_pic_CXX='-KPIC' - lt_prog_compiler_static_CXX='-Bstatic' - ;; - esac - ;; - vxworks*) - ;; - *) - lt_prog_compiler_can_build_shared_CXX=no - ;; - esac - fi - -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 -$as_echo "$lt_prog_compiler_pic_CXX" >&6; } - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_CXX"; then - -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } -if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works_CXX=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12293: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:12297: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works_CXX=yes - fi - fi - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } - -if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then - case $lt_prog_compiler_pic_CXX in - "" | " "*) ;; - *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; - esac -else - lt_prog_compiler_pic_CXX= - lt_prog_compiler_can_build_shared_CXX=no -fi - -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_CXX= - ;; - *) - lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" - ;; -esac - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works_CXX=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works_CXX=yes - fi - else - lt_cv_prog_compiler_static_works_CXX=yes - fi - fi - $rm -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } - -if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then - : -else - lt_prog_compiler_static_CXX= fi -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_CXX=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12397: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:12401: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_CXX=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix[4-9]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - export_symbols_cmds_CXX="$ltdll_cmds" - ;; - cygwin* | mingw*) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - ;; - *) - export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac - exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 -$as_echo "$ld_shlibs_CXX" >&6; } -test "$ld_shlibs_CXX" = no && can_build_shared=no - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_CXX" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_CXX=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_CXX in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_CXX - pic_flag=$lt_prog_compiler_pic_CXX - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_CXX - allow_undefined_flag_CXX= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_CXX=no - else - archive_cmds_need_lc_CXX=yes - fi - allow_undefined_flag_CXX=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 -$as_echo "$archive_cmds_need_lc_CXX" >&6; } - ;; - esac - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib<name>.so - # instead of lib<name>.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; + # Report which library types will actually be built + { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } -freebsd1*) - dynamic_linker=no - ;; + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" -fi - -sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" -fi - -sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action_CXX= -if test -n "$hardcode_libdir_flag_spec_CXX" || \ - test -n "$runpath_var_CXX" || \ - test "X$hardcode_automatic_CXX" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct_CXX" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && - test "$hardcode_minus_L_CXX" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_CXX=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_CXX=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_CXX=unsupported -fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 -$as_echo "$hardcode_action_CXX" >&6; } - -if test "$hardcode_action_CXX" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_CXX \ - CC_CXX \ - LD_CXX \ - lt_prog_compiler_wl_CXX \ - lt_prog_compiler_pic_CXX \ - lt_prog_compiler_static_CXX \ - lt_prog_compiler_no_builtin_flag_CXX \ - export_dynamic_flag_spec_CXX \ - thread_safe_flag_spec_CXX \ - whole_archive_flag_spec_CXX \ - enable_shared_with_static_runtimes_CXX \ - old_archive_cmds_CXX \ - old_archive_from_new_cmds_CXX \ - predep_objects_CXX \ - postdep_objects_CXX \ - predeps_CXX \ - postdeps_CXX \ - compiler_lib_search_path_CXX \ - compiler_lib_search_dirs_CXX \ - archive_cmds_CXX \ - archive_expsym_cmds_CXX \ - postinstall_cmds_CXX \ - postuninstall_cmds_CXX \ - old_archive_from_expsyms_cmds_CXX \ - allow_undefined_flag_CXX \ - no_undefined_flag_CXX \ - export_symbols_cmds_CXX \ - hardcode_libdir_flag_spec_CXX \ - hardcode_libdir_flag_spec_ld_CXX \ - hardcode_libdir_separator_CXX \ - hardcode_automatic_CXX \ - module_cmds_CXX \ - module_expsym_cmds_CXX \ - lt_cv_prog_compiler_c_o_CXX \ - fix_srcfile_path_CXX \ - exclude_expsyms_CXX \ - include_expsyms_CXX; do - - case $var in - old_archive_cmds_CXX | \ - old_archive_from_new_cmds_CXX | \ - archive_cmds_CXX | \ - archive_expsym_cmds_CXX | \ - module_cmds_CXX | \ - module_expsym_cmds_CXX | \ - old_archive_from_expsyms_cmds_CXX | \ - export_symbols_cmds_CXX | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi ;; esac + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } -cfgfile="$ofile" - - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_CXX - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_compiler_CXX - -# Is the compiler the GNU C compiler? -with_gcc=$GCC_CXX - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_LD_CXX - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_CXX - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_CXX -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_CXX - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_CXX -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_CXX -archive_expsym_cmds=$lt_archive_expsym_cmds_CXX -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_CXX -module_expsym_cmds=$lt_module_expsym_cmds_CXX - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_CXX - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_CXX - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_CXX - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_CXX - -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_CXX - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_CXX - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_CXX - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_CXX - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_CXX - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_CXX - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_CXX - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_CXX - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_CXX - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_CXX - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_CXX - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_CXX + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } -# ### END LIBTOOL TAG CONFIG: $tagname -__EOF__ -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi fi - - ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -CC=$lt_save_CC -LDCXX=$LD -LD=$lt_save_LD -GCC=$lt_save_GCC -with_gnu_ldcxx=$with_gnu_ld -with_gnu_ld=$lt_save_with_gnu_ld -lt_cv_path_LDCXX=$lt_cv_path_LD -lt_cv_path_LD=$lt_save_path_LD -lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld -lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld - - else - tagname="" - fi - ;; - - F77) - if test -n "$F77" && test "X$F77" != "Xno"; then - -ac_ext=f -ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' -ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_f77_compiler_gnu - - -archive_cmds_need_lc_F77=no -allow_undefined_flag_F77= -always_export_symbols_F77=no -archive_expsym_cmds_F77= -export_dynamic_flag_spec_F77= -hardcode_direct_F77=no -hardcode_libdir_flag_spec_F77= -hardcode_libdir_flag_spec_ld_F77= -hardcode_libdir_separator_F77= -hardcode_minus_L_F77=no -hardcode_automatic_F77=no -module_cmds_F77= -module_expsym_cmds_F77= -link_all_deplibs_F77=unknown -old_archive_cmds_F77=$old_archive_cmds -no_undefined_flag_F77= -whole_archive_flag_spec_F77= -enable_shared_with_static_runtimes_F77=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -objext_F77=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="\ - subroutine t - return - end -" - -# Code to be used in simple link tests -lt_simple_link_test_code="\ - program t - end -" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* - - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${F77-"f77"} -compiler=$CC -compiler_F77=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } -{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - -{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } -test "$can_build_shared" = "no" && enable_shared=no - -# On AIX, shared libraries and static libraries use the same namespace, and -# are all built from PIC. -case $host_os in -aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; -aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - -{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } -# Make sure either enable_shared or enable_static is yes. -test "$enable_shared" = yes || enable_static=yes -{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } +CC="$lt_save_CC" -GCC_F77="$G77" -LD_F77="$LD" -lt_prog_compiler_wl_F77= -lt_prog_compiler_pic_F77= -lt_prog_compiler_static_F77= -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } - if test "$GCC" = yes; then - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_static_F77='-static' - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_F77='-Bstatic' - fi - ;; - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' - ;; - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic_F77='-DDLL_EXPORT' - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_F77='-fno-common' - ;; - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared_F77=no - enable_shared=no - ;; - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_F77=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_F77='-fPIC' - ;; - esac - ;; - *) - lt_prog_compiler_pic_F77='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl_F77='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_F77='-Bstatic' - else - lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' - fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic_F77='-qnocommon' - lt_prog_compiler_wl_F77='-Wl,' - ;; - esac - ;; - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic_F77='-DDLL_EXPORT' - ;; + ac_config_commands="$ac_config_commands libtool" - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl_F77='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_F77='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static_F77='${wl}-a ${wl}archive' - ;; - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl_F77='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static_F77='-non_shared' - ;; - newsos6) - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-fpic' - lt_prog_compiler_static_F77='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl_F77='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static_F77='-non_shared' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - lt_prog_compiler_wl_F77='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - lt_prog_compiler_wl_F77='' - ;; - esac - ;; - esac - ;; +# Only expand once: - osf3* | osf4* | osf5*) - lt_prog_compiler_wl_F77='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static_F77='-non_shared' - ;; - rdos*) - lt_prog_compiler_static_F77='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl_F77='-Qoption ld ';; - *) - lt_prog_compiler_wl_F77='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl_F77='-Qoption ld ' - lt_prog_compiler_pic_F77='-PIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic_F77='-Kconform_pic' - lt_prog_compiler_static_F77='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_pic_F77='-KPIC' - lt_prog_compiler_static_F77='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl_F77='-Wl,' - lt_prog_compiler_can_build_shared_F77=no - ;; - - uts4*) - lt_prog_compiler_pic_F77='-pic' - lt_prog_compiler_static_F77='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared_F77=no - ;; - esac - fi - -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 -$as_echo "$lt_prog_compiler_pic_F77" >&6; } - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_F77"; then - -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; } -if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then +for ac_prog in 'bison -y' byacc +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_YACC+:} false; then : $as_echo_n "(cached) " >&6 else - lt_cv_prog_compiler_pic_works_F77=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_F77" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13980: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:13984: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works_F77=yes - fi - fi - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; } - -if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then - case $lt_prog_compiler_pic_F77 in - "" | " "*) ;; - *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; - esac + if test -n "$YACC"; then + ac_cv_prog_YACC="$YACC" # Let the user override the test. else - lt_prog_compiler_pic_F77= - lt_prog_compiler_can_build_shared_F77=no -fi - -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_F77= - ;; - *) - lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" - ;; -esac - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works_F77=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works_F77=yes - fi - else - lt_cv_prog_compiler_static_works_F77=yes - fi - fi - $rm -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5 -$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; } - -if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then - : -else - lt_prog_compiler_static_F77= -fi - - -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o_F77=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:14084: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:14088: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_F77=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; } - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_YACC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi -else - need_locks=no -fi - -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag_F77= - enable_shared_with_static_runtimes_F77=no - archive_cmds_F77= - archive_expsym_cmds_F77= - old_archive_From_new_cmds_F77= - old_archive_from_expsyms_cmds_F77= - export_dynamic_flag_spec_F77= - whole_archive_flag_spec_F77= - thread_safe_flag_spec_F77= - hardcode_libdir_flag_spec_F77= - hardcode_libdir_flag_spec_ld_F77= - hardcode_libdir_separator_F77= - hardcode_direct_F77=no - hardcode_minus_L_F77=no - hardcode_shlibpath_var_F77=unsupported - link_all_deplibs_F77=unknown - hardcode_automatic_F77=no - module_cmds_F77= - module_expsym_cmds_F77= - always_export_symbols_F77=no - export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms_F77= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - ld_shlibs_F77=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_F77='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_F77= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs_F77=no - cat <<EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - - # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs_F77=no - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_F77=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_F77=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_F77='-L$libdir' - allow_undefined_flag_F77=unsupported - always_export_symbols_F77=no - enable_shared_with_static_runtimes_F77=yes - export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_F77=no - fi - ;; - - interix[3-9]*) - hardcode_direct_F77=no - hardcode_shlibpath_var_F77=no - hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' - export_dynamic_flag_spec_F77='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - *) - tmp_sharedflag='-shared' ;; - esac - archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test $supports_anon_versioning = yes; then - archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - else - ld_shlibs_F77=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs_F77=no - cat <<EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_F77=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs_F77=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - ld_shlibs_F77=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; - - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_F77=no - fi - ;; - esac - - if test "$ld_shlibs_F77" = no; then - runpath_var= - hardcode_libdir_flag_spec_F77= - export_dynamic_flag_spec_F77= - whole_archive_flag_spec_F77= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag_F77=unsupported - always_export_symbols_F77=yes - archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L_F77=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct_F77=unsupported - fi - ;; - - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds_F77='' - hardcode_direct_F77=yes - hardcode_libdir_separator_F77=':' - link_all_deplibs_F77=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct_F77=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_F77=yes - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_libdir_separator_F77= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_F77=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_F77='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF - program main - - end -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + done +IFS=$as_save_IFS fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_F77="-z nodefs" - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF - program main - - end -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_f77_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi +YACC=$ac_cv_prog_YACC +if test -n "$YACC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $YACC" >&5 +$as_echo "$YACC" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_F77=' ${wl}-bernotok' - allow_undefined_flag_F77=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_F77='$convenience' - archive_cmds_need_lc_F77=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - # see comment about different semantics on the GNU ld section - ld_shlibs_F77=no - ;; - - bsdi[45]*) - export_dynamic_flag_spec_F77=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_F77=' ' - allow_undefined_flag_F77=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds_F77='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path_F77='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes_F77=yes - ;; - - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc_F77=no - hardcode_direct_F77=no - hardcode_automatic_F77=yes - hardcode_shlibpath_var_F77=unsupported - whole_archive_flag_spec_F77='' - link_all_deplibs_F77=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_F77=no - ;; - esac - fi - ;; - - dgux*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_shlibpath_var_F77=no - ;; - - freebsd1*) - ld_shlibs_F77=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes - hardcode_minus_L_F77=yes - hardcode_shlibpath_var_F77=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; - - hpux9*) - if test "$GCC" = yes; then - archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: - hardcode_direct_F77=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - export_dynamic_flag_spec_F77='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: - - hardcode_direct_F77=yes - export_dynamic_flag_spec_F77='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_F77=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_libdir_flag_spec_ld_F77='+b $libdir' - hardcode_direct_F77=no - hardcode_shlibpath_var_F77=no - ;; - *) - hardcode_direct_F77=yes - export_dynamic_flag_spec_F77='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_F77=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' - fi - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - link_all_deplibs_F77=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - ;; - - newsos6) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - hardcode_shlibpath_var_F77=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct_F77=yes - hardcode_shlibpath_var_F77=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' - export_dynamic_flag_spec_F77='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-R$libdir' - ;; - *) - archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs_F77=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_minus_L_F77=yes - allow_undefined_flag_F77=unsupported - archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag_F77=' -expect_unresolved \*' - archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_F77=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag_F77=' -expect_unresolved \*' - archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec_F77='-rpath $libdir' - fi - hardcode_libdir_separator_F77=: - ;; - - solaris*) - no_undefined_flag_F77=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec_F77='-R$libdir' - hardcode_shlibpath_var_F77=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs_F77=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_direct_F77=yes - hardcode_minus_L_F77=yes - hardcode_shlibpath_var_F77=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds_F77='$CC -r -o $output$reload_objs' - hardcode_direct_F77=no - ;; - motorola) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_F77=no - ;; - - sysv4.3*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_F77=no - export_dynamic_flag_spec_F77='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_F77=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs_F77=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag_F77='${wl}-z,text' - archive_cmds_need_lc_F77=no - hardcode_shlibpath_var_F77=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag_F77='${wl}-z,text' - allow_undefined_flag_F77='${wl}-z,nodefs' - archive_cmds_need_lc_F77=no - hardcode_shlibpath_var_F77=no - hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator_F77=':' - link_all_deplibs_F77=yes - export_dynamic_flag_spec_F77='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_F77='-L$libdir' - hardcode_shlibpath_var_F77=no - ;; - - *) - ld_shlibs_F77=no - ;; - esac - fi + test -n "$YACC" && break +done +test -n "$YACC" || YACC="yacc" -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 -$as_echo "$ld_shlibs_F77" >&6; } -test "$ld_shlibs_F77" = no && can_build_shared=no -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_F77" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_F77=yes +am__api_version='1.12' - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_F77 in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_F77 - pic_flag=$lt_prog_compiler_pic_F77 - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_F77 - allow_undefined_flag_F77= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_F77=no - else - archive_cmds_need_lc_F77=yes - fi - allow_undefined_flag_F77=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 -$as_echo "$archive_cmds_need_lc_F77" >&6; } - ;; - esac - fi - ;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac - -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" - -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib<name>.so - # instead of lib<name>.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" -fi - -sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" -fi - -sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action_F77= -if test -n "$hardcode_libdir_flag_spec_F77" || \ - test -n "$runpath_var_F77" || \ - test "X$hardcode_automatic_F77" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct_F77" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && - test "$hardcode_minus_L_F77" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_F77=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_F77=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_F77=unsupported -fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 -$as_echo "$hardcode_action_F77" >&6; } - -if test "$hardcode_action_F77" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_F77 \ - CC_F77 \ - LD_F77 \ - lt_prog_compiler_wl_F77 \ - lt_prog_compiler_pic_F77 \ - lt_prog_compiler_static_F77 \ - lt_prog_compiler_no_builtin_flag_F77 \ - export_dynamic_flag_spec_F77 \ - thread_safe_flag_spec_F77 \ - whole_archive_flag_spec_F77 \ - enable_shared_with_static_runtimes_F77 \ - old_archive_cmds_F77 \ - old_archive_from_new_cmds_F77 \ - predep_objects_F77 \ - postdep_objects_F77 \ - predeps_F77 \ - postdeps_F77 \ - compiler_lib_search_path_F77 \ - compiler_lib_search_dirs_F77 \ - archive_cmds_F77 \ - archive_expsym_cmds_F77 \ - postinstall_cmds_F77 \ - postuninstall_cmds_F77 \ - old_archive_from_expsyms_cmds_F77 \ - allow_undefined_flag_F77 \ - no_undefined_flag_F77 \ - export_symbols_cmds_F77 \ - hardcode_libdir_flag_spec_F77 \ - hardcode_libdir_flag_spec_ld_F77 \ - hardcode_libdir_separator_F77 \ - hardcode_automatic_F77 \ - module_cmds_F77 \ - module_expsym_cmds_F77 \ - lt_cv_prog_compiler_c_o_F77 \ - fix_srcfile_path_F77 \ - exclude_expsyms_F77 \ - include_expsyms_F77; do - - case $var in - old_archive_cmds_F77 | \ - old_archive_from_new_cmds_F77 | \ - archive_cmds_F77 | \ - archive_expsym_cmds_F77 | \ - module_cmds_F77 | \ - module_expsym_cmds_F77 | \ - old_archive_from_expsyms_cmds_F77 | \ - export_symbols_cmds_F77 | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="$ofile" - - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_F77 - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_compiler_F77 - -# Is the compiler the GNU C compiler? -with_gcc=$GCC_F77 - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_LD_F77 - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_F77 - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_F77 -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_F77 - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_F77 -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_F77 -archive_expsym_cmds=$lt_archive_expsym_cmds_F77 -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_F77 -module_expsym_cmds=$lt_module_expsym_cmds_F77 - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_F77 - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_F77 - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_F77 - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_F77 - -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77 - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_F77 - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_F77 - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_F77 - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_F77 - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_F77 - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_F77 - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_F77 - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_F77 - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_F77 - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_F77 - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_F77 - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_F77 - -# ### END LIBTOOL TAG CONFIG: $tagname - -__EOF__ - - -else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - else - tagname="" - fi - ;; - - GCJ) - if test -n "$GCJ" && test "X$GCJ" != "Xno"; then - - -# Source file extension for Java test sources. -ac_ext=java - -# Object file extension for compiled Java test sources. -objext=o -objext_GCJ=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* - - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${GCJ-"gcj"} -compiler=$CC -compiler_GCJ=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -archive_cmds_need_lc_GCJ=no - -old_archive_cmds_GCJ=$old_archive_cmds - - -lt_prog_compiler_no_builtin_flag_GCJ= - -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' - - -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16299: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:16303: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` fi - fi - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : else - : + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 fi - +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! fi -lt_prog_compiler_wl_GCJ= -lt_prog_compiler_pic_GCJ= -lt_prog_compiler_static_GCJ= - -{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } - - if test "$GCC" = yes; then - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_static_GCJ='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_GCJ='-Bstatic' - fi - ;; - - amigaos*) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' - ;; +rm -f conftest.file - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic_GCJ='-fno-common' - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared_GCJ=no - enable_shared=no - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic_GCJ=-Kconform_pic - fi - ;; - - hpux*) - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_GCJ='-fPIC' - ;; - esac - ;; - - *) - lt_prog_compiler_pic_GCJ='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl_GCJ='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static_GCJ='-Bstatic' - else - lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' - fi - ;; - darwin*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - case $cc_basename in - xlc*) - lt_prog_compiler_pic_GCJ='-qnocommon' - lt_prog_compiler_wl_GCJ='-Wl,' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl_GCJ='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic_GCJ='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl_GCJ='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static_GCJ='-non_shared' - ;; - - newsos6) - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - icc* | ecc*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-fpic' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl_GCJ='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static_GCJ='-non_shared' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - lt_prog_compiler_wl_GCJ='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - lt_prog_compiler_wl_GCJ='' - ;; - esac - ;; - esac - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl_GCJ='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static_GCJ='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static_GCJ='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl_GCJ='-Qoption ld ';; - *) - lt_prog_compiler_wl_GCJ='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl_GCJ='-Qoption ld ' - lt_prog_compiler_pic_GCJ='-PIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic_GCJ='-Kconform_pic' - lt_prog_compiler_static_GCJ='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_pic_GCJ='-KPIC' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl_GCJ='-Wl,' - lt_prog_compiler_can_build_shared_GCJ=no - ;; - - uts4*) - lt_prog_compiler_pic_GCJ='-pic' - lt_prog_compiler_static_GCJ='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared_GCJ=no - ;; - esac - fi - -{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 -$as_echo "$lt_prog_compiler_pic_GCJ" >&6; } - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic_GCJ"; then +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` -{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; } -if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works_GCJ=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic_GCJ" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16589: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:16593: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works_GCJ=yes - fi - fi - $rm conftest* +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; } - -if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then - case $lt_prog_compiler_pic_GCJ in - "" | " "*) ;; - *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; - esac +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " else - lt_prog_compiler_pic_GCJ= - lt_prog_compiler_can_build_shared_GCJ=no + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi -fi -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic_GCJ= - ;; +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) - lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" - ;; -esac - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" -{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works_GCJ=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works_GCJ=yes - fi - else - lt_cv_prog_compiler_static_works_GCJ=yes - fi - fi - $rm -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5 -$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; } - -if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then - : -else - lt_prog_compiler_static_GCJ= + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac fi - -{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else - lt_cv_prog_compiler_c_o_GCJ=no - $rm -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16693: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:16697: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o_GCJ=yes - fi - fi - chmod u+w . 2>&5 - $rm conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files - $rm out/* && rmdir out - cd .. - rmdir conftest - $rm conftest* - -fi -{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 -$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; } - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $rm conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else - need_locks=no -fi - -{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag_GCJ= - enable_shared_with_static_runtimes_GCJ=no - archive_cmds_GCJ= - archive_expsym_cmds_GCJ= - old_archive_From_new_cmds_GCJ= - old_archive_from_expsyms_cmds_GCJ= - export_dynamic_flag_spec_GCJ= - whole_archive_flag_spec_GCJ= - thread_safe_flag_spec_GCJ= - hardcode_libdir_flag_spec_GCJ= - hardcode_libdir_flag_spec_ld_GCJ= - hardcode_libdir_separator_GCJ= - hardcode_direct_GCJ=no - hardcode_minus_L_GCJ=no - hardcode_shlibpath_var_GCJ=unsupported - link_all_deplibs_GCJ=unknown - hardcode_automatic_GCJ=no - module_cmds_GCJ= - module_expsym_cmds_GCJ= - always_export_symbols_GCJ=no - export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms_GCJ= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - # Just being paranoid about ensuring that cc_basename is set. - for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - case $host_os in - cygwin* | mingw* | pw32*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - ld_shlibs_GCJ=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' - export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec_GCJ= - fi - supports_anon_versioning=no - case `$LD -v 2>/dev/null` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs_GCJ=no - cat <<EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -EOF - fi - ;; - - amigaos*) - archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - - # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports - # that the semantics of dynamic libraries on AmigaOS, at least up - # to version 4, is to share data among multiple programs linked - # with the same dynamic library. Since this doesn't match the - # behavior of shared libraries on other platforms, we can't use - # them. - ld_shlibs_GCJ=no - ;; - - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag_GCJ=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - - cygwin* | mingw* | pw32*) - # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec_GCJ='-L$libdir' - allow_undefined_flag_GCJ=unsupported - always_export_symbols_GCJ=no - enable_shared_with_static_runtimes_GCJ=yes - export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs_GCJ=no - fi - ;; - - interix[3-9]*) - hardcode_direct_GCJ=no - hardcode_shlibpath_var_GCJ=no - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - export_dynamic_flag_spec_GCJ='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | k*bsd*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - tmp_addflag= - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - *) - tmp_sharedflag='-shared' ;; - esac - archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test $supports_anon_versioning = yes; then - archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - $echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - else - ld_shlibs_GCJ=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs_GCJ=no - cat <<EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -EOF - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs_GCJ=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs_GCJ=no - fi - ;; - esac - - if test "$ld_shlibs_GCJ" = no; then - runpath_var= - hardcode_libdir_flag_spec_GCJ= - export_dynamic_flag_spec_GCJ= - whole_archive_flag_spec_GCJ= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag_GCJ=unsupported - always_export_symbols_GCJ=yes - archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L_GCJ=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct_GCJ=unsupported - fi - ;; - - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | grep 'GNU' > /dev/null; then - export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds_GCJ='' - hardcode_direct_GCJ=yes - hardcode_libdir_separator_GCJ=':' - link_all_deplibs_GCJ=yes - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct_GCJ=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L_GCJ=yes - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_libdir_separator_GCJ= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols_GCJ=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag_GCJ='-berok' - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - + done +IFS=$as_save_IFS fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag_GCJ="-z nodefs" - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an empty executable. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag_GCJ=' ${wl}-bernotok' - allow_undefined_flag_GCJ=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec_GCJ='$convenience' - archive_cmds_need_lc_GCJ=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - # see comment about different semantics on the GNU ld section - ld_shlibs_GCJ=no - ;; - - bsdi[45]*) - export_dynamic_flag_spec_GCJ=-rdynamic - ;; - - cygwin* | mingw* | pw32*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec_GCJ=' ' - allow_undefined_flag_GCJ=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_From_new_cmds_GCJ='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes_GCJ=yes - ;; - - darwin* | rhapsody*) - case $host_os in - rhapsody* | darwin1.[012]) - allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' - ;; - *) # Darwin 1.3 on - if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then - allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - else - case ${MACOSX_DEPLOYMENT_TARGET} in - 10.[012]) - allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' - ;; - 10.*) - allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' - ;; - esac - fi - ;; - esac - archive_cmds_need_lc_GCJ=no - hardcode_direct_GCJ=no - hardcode_automatic_GCJ=yes - hardcode_shlibpath_var_GCJ=unsupported - whole_archive_flag_spec_GCJ='' - link_all_deplibs_GCJ=yes - if test "$GCC" = yes ; then - output_verbose_link_cmd='echo' - archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - else - case $cc_basename in - xlc*) - output_verbose_link_cmd='echo' - archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' - module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' - # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds - archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' - ;; - *) - ld_shlibs_GCJ=no - ;; - esac - fi - ;; - - dgux*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_shlibpath_var_GCJ=no - ;; - - freebsd1*) - ld_shlibs_GCJ=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - hpux9*) - if test "$GCC" = yes; then - archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_direct_GCJ=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - - hardcode_direct_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' - hardcode_direct_GCJ=no - hardcode_shlibpath_var_GCJ=no - ;; - *) - hardcode_direct_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L_GCJ=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' - fi - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - link_all_deplibs_GCJ=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - newsos6) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - hardcode_shlibpath_var_GCJ=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct_GCJ=yes - hardcode_shlibpath_var_GCJ=no - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - export_dynamic_flag_spec_GCJ='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-R$libdir' - ;; - *) - archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs_GCJ=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_minus_L_GCJ=yes - allow_undefined_flag_GCJ=unsupported - archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag_GCJ=' -expect_unresolved \*' - archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - fi - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator_GCJ=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag_GCJ=' -expect_unresolved \*' - archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ - $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec_GCJ='-rpath $libdir' - fi - hardcode_libdir_separator_GCJ=: - ;; - - solaris*) - no_undefined_flag_GCJ=' -z text' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' - else - wlarc='' - archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' - fi - hardcode_libdir_flag_spec_GCJ='-R$libdir' - hardcode_shlibpath_var_GCJ=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs_GCJ=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_direct_GCJ=yes - hardcode_minus_L_GCJ=yes - hardcode_shlibpath_var_GCJ=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds_GCJ='$CC -r -o $output$reload_objs' - hardcode_direct_GCJ=no - ;; - motorola) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var_GCJ=no - ;; - - sysv4.3*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - export_dynamic_flag_spec_GCJ='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var_GCJ=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs_GCJ=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag_GCJ='${wl}-z,text' - archive_cmds_need_lc_GCJ=no - hardcode_shlibpath_var_GCJ=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag_GCJ='${wl}-z,text' - allow_undefined_flag_GCJ='${wl}-z,nodefs' - archive_cmds_need_lc_GCJ=no - hardcode_shlibpath_var_GCJ=no - hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator_GCJ=':' - link_all_deplibs_GCJ=yes - export_dynamic_flag_spec_GCJ='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec_GCJ='-L$libdir' - hardcode_shlibpath_var_GCJ=no - ;; - - *) - ld_shlibs_GCJ=no - ;; - esac - fi - -{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 -$as_echo "$ld_shlibs_GCJ" >&6; } -test "$ld_shlibs_GCJ" = no && can_build_shared=no - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc_GCJ" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc_GCJ=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds_GCJ in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $rm conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl_GCJ - pic_flag=$lt_prog_compiler_pic_GCJ - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ - allow_undefined_flag_GCJ= - if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 - (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - then - archive_cmds_need_lc_GCJ=no - else - archive_cmds_need_lc_GCJ=yes - fi - allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $rm conftest* - { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 -$as_echo "$archive_cmds_need_lc_GCJ" >&6; } - ;; - esac - fi - ;; -esac - -{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" - -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib<name>.so - # instead of lib<name>.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $rm \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -nto-qnx*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - export_dynamic_flag_spec='${wl}-Blargedynsym' - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - shlibpath_overrides_runpath=no - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - shlibpath_overrides_runpath=yes - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - $as_echo_n "(cached) " >&6 -else - lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" fi - -sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else - lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" -fi - -sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action_GCJ= -if test -n "$hardcode_libdir_flag_spec_GCJ" || \ - test -n "$runpath_var_GCJ" || \ - test "X$hardcode_automatic_GCJ" = "Xyes" ; then - - # We can hardcode non-existant directories. - if test "$hardcode_direct_GCJ" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && - test "$hardcode_minus_L_GCJ" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action_GCJ=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action_GCJ=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action_GCJ=unsupported -fi -{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 -$as_echo "$hardcode_action_GCJ" >&6; } - -if test "$hardcode_action_GCJ" = relink; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_GCJ \ - CC_GCJ \ - LD_GCJ \ - lt_prog_compiler_wl_GCJ \ - lt_prog_compiler_pic_GCJ \ - lt_prog_compiler_static_GCJ \ - lt_prog_compiler_no_builtin_flag_GCJ \ - export_dynamic_flag_spec_GCJ \ - thread_safe_flag_spec_GCJ \ - whole_archive_flag_spec_GCJ \ - enable_shared_with_static_runtimes_GCJ \ - old_archive_cmds_GCJ \ - old_archive_from_new_cmds_GCJ \ - predep_objects_GCJ \ - postdep_objects_GCJ \ - predeps_GCJ \ - postdeps_GCJ \ - compiler_lib_search_path_GCJ \ - compiler_lib_search_dirs_GCJ \ - archive_cmds_GCJ \ - archive_expsym_cmds_GCJ \ - postinstall_cmds_GCJ \ - postuninstall_cmds_GCJ \ - old_archive_from_expsyms_cmds_GCJ \ - allow_undefined_flag_GCJ \ - no_undefined_flag_GCJ \ - export_symbols_cmds_GCJ \ - hardcode_libdir_flag_spec_GCJ \ - hardcode_libdir_flag_spec_ld_GCJ \ - hardcode_libdir_separator_GCJ \ - hardcode_automatic_GCJ \ - module_cmds_GCJ \ - module_expsym_cmds_GCJ \ - lt_cv_prog_compiler_c_o_GCJ \ - fix_srcfile_path_GCJ \ - exclude_expsyms_GCJ \ - include_expsyms_GCJ; do - - case $var in - old_archive_cmds_GCJ | \ - old_archive_from_new_cmds_GCJ | \ - archive_cmds_GCJ | \ - archive_expsym_cmds_GCJ | \ - module_cmds_GCJ | \ - module_expsym_cmds_GCJ | \ - old_archive_from_expsyms_cmds_GCJ | \ - export_symbols_cmds_GCJ | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac - done - - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="$ofile" - - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_GCJ - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_compiler_GCJ - -# Is the compiler the GNU C compiler? -with_gcc=$GCC_GCJ - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_LD_GCJ - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_GCJ - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_GCJ -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_GCJ - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_GCJ -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_GCJ -archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_GCJ -module_expsym_cmds=$lt_module_expsym_cmds_GCJ - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_GCJ - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_GCJ - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_GCJ - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_GCJ - -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_GCJ - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_GCJ - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_GCJ - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_GCJ - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_GCJ - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_GCJ - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_GCJ - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_GCJ - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_GCJ - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_GCJ - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_GCJ - -# ### END LIBTOOL TAG CONFIG: $tagname - -__EOF__ - - + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - else - tagname="" - fi - ;; - - RC) - - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -objext_RC=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$rm conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$rm -r conftest* - - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -CC=${RC-"windres"} -compiler=$CC -compiler_RC=$CC -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac done -cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - -lt_cv_prog_compiler_c_o_RC=yes - -# The else clause should only fire when bootstrapping the -# libtool distribution, otherwise you forgot to ship ltmain.sh -# with your package, and you will get complaints that there are -# no rules to generate ltmain.sh. -if test -f "$ltmain"; then - # See if we are running on zsh, and set the options which allow our commands through - # without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - # Now quote all the things that may contain metacharacters while being - # careful not to overquote the AC_SUBSTed values. We take copies of the - # variables and quote the copies for generation of the libtool script. - for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ - SED SHELL STRIP \ - libname_spec library_names_spec soname_spec extract_expsyms_cmds \ - old_striplib striplib file_magic_cmd finish_cmds finish_eval \ - deplibs_check_method reload_flag reload_cmds need_locks \ - lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ - lt_cv_sys_global_symbol_to_c_name_address \ - sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ - old_postinstall_cmds old_postuninstall_cmds \ - compiler_RC \ - CC_RC \ - LD_RC \ - lt_prog_compiler_wl_RC \ - lt_prog_compiler_pic_RC \ - lt_prog_compiler_static_RC \ - lt_prog_compiler_no_builtin_flag_RC \ - export_dynamic_flag_spec_RC \ - thread_safe_flag_spec_RC \ - whole_archive_flag_spec_RC \ - enable_shared_with_static_runtimes_RC \ - old_archive_cmds_RC \ - old_archive_from_new_cmds_RC \ - predep_objects_RC \ - postdep_objects_RC \ - predeps_RC \ - postdeps_RC \ - compiler_lib_search_path_RC \ - compiler_lib_search_dirs_RC \ - archive_cmds_RC \ - archive_expsym_cmds_RC \ - postinstall_cmds_RC \ - postuninstall_cmds_RC \ - old_archive_from_expsyms_cmds_RC \ - allow_undefined_flag_RC \ - no_undefined_flag_RC \ - export_symbols_cmds_RC \ - hardcode_libdir_flag_spec_RC \ - hardcode_libdir_flag_spec_ld_RC \ - hardcode_libdir_separator_RC \ - hardcode_automatic_RC \ - module_cmds_RC \ - module_expsym_cmds_RC \ - lt_cv_prog_compiler_c_o_RC \ - fix_srcfile_path_RC \ - exclude_expsyms_RC \ - include_expsyms_RC; do - - case $var in - old_archive_cmds_RC | \ - old_archive_from_new_cmds_RC | \ - archive_cmds_RC | \ - archive_expsym_cmds_RC | \ - module_cmds_RC | \ - module_expsym_cmds_RC | \ - old_archive_from_expsyms_cmds_RC | \ - export_symbols_cmds_RC | \ - extract_expsyms_cmds | reload_cmds | finish_cmds | \ - postinstall_cmds | postuninstall_cmds | \ - old_postinstall_cmds | old_postuninstall_cmds | \ - sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) - # Double-quote double-evaled strings. - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" - ;; - *) - eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" - ;; - esac done +IFS=$as_save_IFS - case $lt_echo in - *'\$0 --fallback-echo"') - lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` - ;; - esac - -cfgfile="$ofile" - - cat <<__EOF__ >> "$cfgfile" -# ### BEGIN LIBTOOL TAG CONFIG: $tagname - -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc_RC - -# Whether or not to disallow shared libs when runtime libs are static -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# An echo program that does not interpret backslashes. -echo=$lt_echo - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A C compiler. -LTCC=$lt_LTCC - -# LTCC compiler flags. -LTCFLAGS=$lt_LTCFLAGS - -# A language-specific compiler. -CC=$lt_compiler_RC - -# Is the compiler the GNU C compiler? -with_gcc=$GCC_RC - -# An ERE matcher. -EGREP=$lt_EGREP - -# The linker used to build libraries. -LD=$lt_LD_RC - -# Whether we need hard or soft links. -LN_S=$lt_LN_S - -# A BSD-compatible nm program. -NM=$lt_NM - -# A symbol stripping program -STRIP=$lt_STRIP - -# Used to examine libraries when file_magic_cmd begins "file" -MAGIC_CMD=$MAGIC_CMD - -# Used on cygwin: DLL creation program. -DLLTOOL="$DLLTOOL" - -# Used on cygwin: object dumper. -OBJDUMP="$OBJDUMP" - -# Used on cygwin: assembler. -AS="$AS" - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl_RC - -# Object file suffix (normally "o"). -objext="$ac_objext" - -# Old archive suffix (normally "a"). -libext="$libext" - -# Shared library suffix (normally ".so"). -shrext_cmds='$shrext_cmds' - -# Executable file suffix (normally ""). -exeext="$exeext" - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic_RC -pic_mode=$pic_mode - -# What is the maximum length of a command? -max_cmd_len=$lt_cv_sys_max_cmd_len - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Do we need the lib prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static_RC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC - -# Library versioning type. -version_type=$version_type - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Commands used to build and install an old-style archive. -RANLIB=$lt_RANLIB -old_archive_cmds=$lt_old_archive_cmds_RC -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC - -# Commands used to build and install a shared archive. -archive_cmds=$lt_archive_cmds_RC -archive_expsym_cmds=$lt_archive_expsym_cmds_RC -postinstall_cmds=$lt_postinstall_cmds -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to build a loadable module (assumed same as above if empty) -module_cmds=$lt_module_cmds_RC -module_expsym_cmds=$lt_module_expsym_cmds_RC - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - -# Dependencies to place before the objects being linked to create a -# shared library. -predep_objects=$lt_predep_objects_RC - -# Dependencies to place after the objects being linked to create a -# shared library. -postdep_objects=$lt_postdep_objects_RC - -# Dependencies to place before the objects being linked to create a -# shared library. -predeps=$lt_predeps_RC - -# Dependencies to place after the objects being linked to create a -# shared library. -postdeps=$lt_postdeps_RC - -# The directories searched by this compiler when creating a shared -# library -compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC - -# The library search path used internally by the compiler when linking -# a shared library. -compiler_lib_search_path=$lt_compiler_lib_search_path_RC - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd=$lt_file_magic_cmd - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag_RC - -# Flag that forces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag_RC - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval=$lt_finish_eval - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# This is the shared library runtime path variable. -runpath_var=$runpath_var - -# This is the shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action_RC - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC - -# If ld is used when linking, flag to hardcode \$libdir into -# a binary during linking. This must work even if \$libdir does -# not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC - -# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=$hardcode_direct_RC - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=$hardcode_minus_L_RC - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var_RC - -# Set to yes if building a shared library automatically hardcodes DIR into the library -# and all subsequent libraries and executables linked against it. -hardcode_automatic=$hardcode_automatic_RC - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at relink time. -variables_saved_for_relink="$variables_saved_for_relink" - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs_RC - -# Compile-time system search path for libraries -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to yes if exported symbols are required. -always_export_symbols=$always_export_symbols_RC - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds_RC - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms_RC - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms_RC - -# ### END LIBTOOL TAG CONFIG: $tagname - -__EOF__ - - +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } else - # If there is no Makefile yet, we rely on a make rule to execute - # `config.status --recheck' to rerun these tests and create the - # libtool script then. - ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` - if test -f "$ltmain_in"; then - test -f Makefile && make "$ltmain" - fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - ;; - - *) - { { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 -$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;} - { (exit 1); exit 1; }; } - ;; - esac - - # Append the new tag name to the list of available tags. - if test -n "$tagname" ; then - available_tags="$available_tags $tagname" - fi - fi - done - IFS="$lt_save_ifs" - - # Now substitute the updated list of available tags. - if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then - mv "${ofile}T" "$ofile" - chmod +x "$ofile" + if test "x$ac_ct_STRIP" = x; then + STRIP=":" else - rm -f "${ofile}T" - { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 -$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;} - { (exit 1); exit 1; }; } + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP fi -fi - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - -# Prevent multiple expansion - - - - - - - - - - - - - - - - - - - - - -am__api_version='1.10' - -{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } - fi - - test "$2" = conftest.file - ) -then - # Ok. - : else - { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -$as_echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } + STRIP="$ac_cv_prog_STRIP" fi -{ $as_echo "$as_me:$LINENO: result: yes" >&5 -$as_echo "yes" >&6; } -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; } if test -z "$MKDIR_P"; then - if test "${ac_cv_path_mkdir+set}" = set; then + if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR @@ -19457,9 +11395,9 @@ for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do + for ac_prog in mkdir gmkdir; do for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( 'mkdir (GNU coreutils) '* | \ 'mkdir (coreutils) '* | \ @@ -19469,11 +11407,12 @@ do esac done done -done + done IFS=$as_save_IFS fi + test -d ./--version && rmdir ./--version if test "${ac_cv_path_mkdir+set}" = set; then MKDIR_P="$ac_cv_path_mkdir -p" else @@ -19481,66 +11420,17 @@ fi # value for MKDIR_P within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the value is a relative name. - test -d ./--version && rmdir ./--version MKDIR_P="$ac_install_sh -d" fi fi -{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 $as_echo "$MKDIR_P" >&6; } -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AWK+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:$LINENO: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } set x ${MAKE-make} ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else cat >conftest.make <<\_ACEOF @@ -19548,7 +11438,7 @@ SHELL = /bin/sh all: @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. case `${MAKE-make} -f conftest.make 2>/dev/null` in *@@@%%%=?*=@@@%%%*) eval ac_cv_prog_make_${ac_make}_set=yes;; @@ -19558,11 +11448,11 @@ esac rm -f conftest.make fi if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:$LINENO: result: yes" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } SET_MAKE= else - { $as_echo "$as_me:$LINENO: result: no" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } SET_MAKE="MAKE=${MAKE-make}" fi @@ -19584,50 +11474,51 @@ ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' am__doit: - @echo done + @echo this is the am__doit target .PHONY: am__doit END # If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 $as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac fi -{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 $as_echo "$_am_result" >&6; } rm -f confinc confmf # Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then +if test "${enable_dependency_tracking+set}" = set; then : enableval=$enable_dependency_tracking; fi if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' + am__nodep='_no' fi if test "x$enable_dependency_tracking" != xno; then AMDEP_TRUE= @@ -19644,9 +11535,7 @@ if test "`cd $srcdir && pwd`" != "`pwd`"; then am__isrc=' -I$(srcdir)' # test to see if srcdir already configured if test -f $srcdir/config.status; then - { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 fi fi @@ -19661,8 +11550,9 @@ fi # Define the identity of the package. + PACKAGE=OpenBSM - VERSION=1.1p2 + VERSION=1.2alpha2 cat >>confdefs.h <<_ACEOF @@ -19690,136 +11580,37 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} -install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:$LINENO: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -$as_echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html> +# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html> +mkdir_p='$(MKDIR_P)' # We need awk for the "check" target. The system "awk" is bad on # some platforms. -# Always define AMTAR for backward compatibility. - -AMTAR=${AMTAR-"${am_missing_run}tar"} +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' depcc="$CC" am_compiler_list= -{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 $as_echo_n "checking dependency style of $depcc... " >&6; } -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then +if ${am_cv_CC_dependencies_compiler_type+:} false; then : $as_echo_n "(cached) " >&6 else if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. @@ -19837,6 +11628,11 @@ else if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and @@ -19848,35 +11644,49 @@ else : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; none) break ;; esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + source=sub/conftest.c object=$am__obj \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message @@ -19900,7 +11710,7 @@ else fi fi -{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type @@ -19915,127 +11725,127 @@ else fi -depcc="$CXX" am_compiler_list= -{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlsym" >&5 +$as_echo_n "checking for library containing dlsym... " >&6; } +if ${ac_cv_search_dlsym+:} false; then : $as_echo_n "(cached) " >&6 else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ - am_cv_CXX_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlsym (); +int +main () +{ +return dlsym (); + ; + return 0; +} +_ACEOF +for ac_lib in '' dl; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CXX_dependencies_compiler_type=$depmode - break - fi - fi - done + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_dlsym=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_dlsym+:} false; then : + break +fi +done +if ${ac_cv_search_dlsym+:} false; then : - cd .. - rm -rf conftest.dir else - am_cv_CXX_dependencies_compiler_type=none + ac_cv_search_dlsym=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlsym" >&5 +$as_echo "$ac_cv_search_dlsym" >&6; } +ac_res=$ac_cv_search_dlsym +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi -{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } -CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then - am__fastdepCXX_TRUE= - am__fastdepCXX_FALSE='#' +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing pthread_create" >&5 +$as_echo_n "checking for library containing pthread_create... " >&6; } +if ${ac_cv_search_pthread_create+:} false; then : + $as_echo_n "(cached) " >&6 else - am__fastdepCXX_TRUE='#' - am__fastdepCXX_FALSE= -fi + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pthread_create (); +int +main () +{ +return pthread_create (); + ; + return 0; +} +_ACEOF +for ac_lib in '' pthread; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_pthread_create=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_pthread_create+:} false; then : + break +fi +done +if ${ac_cv_search_pthread_create+:} false; then : +else + ac_cv_search_pthread_create=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_pthread_create" >&5 +$as_echo "$ac_cv_search_pthread_create" >&6; } +ac_res=$ac_cv_search_pthread_create +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" +fi -{ $as_echo "$as_me:$LINENO: checking for library containing dlsym" >&5 -$as_echo_n "checking for library containing dlsym... " >&6; } -if test "${ac_cv_search_dlsym+set}" = set; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing clock_gettime" >&5 +$as_echo_n "checking for library containing clock_gettime... " >&6; } +if ${ac_cv_search_clock_gettime+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -20044,85 +11854,110 @@ cat >>conftest.$ac_ext <<_ACEOF #ifdef __cplusplus extern "C" #endif -char dlsym (); +char clock_gettime (); int main () { -return dlsym (); +return clock_gettime (); ; return 0; } _ACEOF -for ac_lib in '' dl; do +for ac_lib in '' rt; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi - rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_search_dlsym=$ac_res -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_clock_gettime=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_clock_gettime+:} false; then : + break +fi +done +if ${ac_cv_search_clock_gettime+:} false; then : +else + ac_cv_search_clock_gettime=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_clock_gettime" >&5 +$as_echo "$ac_cv_search_clock_gettime" >&6; } +ac_res=$ac_cv_search_clock_gettime +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext - if test "${ac_cv_search_dlsym+set}" = set; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing SSL_connect" >&5 +$as_echo_n "checking for library containing SSL_connect... " >&6; } +if ${ac_cv_search_SSL_connect+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char SSL_connect (); +int +main () +{ +return SSL_connect (); + ; + return 0; +} +_ACEOF +for ac_lib in '' ssl; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_SSL_connect=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_SSL_connect+:} false; then : break fi done -if test "${ac_cv_search_dlsym+set}" = set; then - : +if ${ac_cv_search_SSL_connect+:} false; then : + else - ac_cv_search_dlsym=no + ac_cv_search_SSL_connect=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_dlsym" >&5 -$as_echo "$ac_cv_search_dlsym" >&6; } -ac_res=$ac_cv_search_dlsym -if test "$ac_res" != no; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_SSL_connect" >&5 +$as_echo "$ac_cv_search_SSL_connect" >&6; } +ac_res=$ac_cv_search_SSL_connect +if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi -{ $as_echo "$as_me:$LINENO: checking for library containing clock_gettime" >&5 -$as_echo_n "checking for library containing clock_gettime... " >&6; } -if test "${ac_cv_search_clock_gettime+set}" = set; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing humanize_number" >&5 +$as_echo_n "checking for library containing humanize_number... " >&6; } +if ${ac_cv_search_humanize_number+:} false; then : $as_echo_n "(cached) " >&6 else ac_func_search_save_LIBS=$LIBS -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -20131,86 +11966,111 @@ cat >>conftest.$ac_ext <<_ACEOF #ifdef __cplusplus extern "C" #endif -char clock_gettime (); +char humanize_number (); int main () { -return clock_gettime (); +return humanize_number (); ; return 0; } _ACEOF -for ac_lib in '' rt; do +for ac_lib in '' util; do if test -z "$ac_lib"; then ac_res="none required" else ac_res=-l$ac_lib LIBS="-l$ac_lib $ac_func_search_save_LIBS" fi - rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - ac_cv_search_clock_gettime=$ac_res -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_humanize_number=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_humanize_number+:} false; then : + break +fi +done +if ${ac_cv_search_humanize_number+:} false; then : +else + ac_cv_search_humanize_number=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_humanize_number" >&5 +$as_echo "$ac_cv_search_humanize_number" >&6; } +ac_res=$ac_cv_search_humanize_number +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext - if test "${ac_cv_search_clock_gettime+set}" = set; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing pidfile_open" >&5 +$as_echo_n "checking for library containing pidfile_open... " >&6; } +if ${ac_cv_search_pidfile_open+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pidfile_open (); +int +main () +{ +return pidfile_open (); + ; + return 0; +} +_ACEOF +for ac_lib in '' util; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_pidfile_open=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_pidfile_open+:} false; then : break fi done -if test "${ac_cv_search_clock_gettime+set}" = set; then - : +if ${ac_cv_search_pidfile_open+:} false; then : + else - ac_cv_search_clock_gettime=no + ac_cv_search_pidfile_open=no fi rm conftest.$ac_ext LIBS=$ac_func_search_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_search_clock_gettime" >&5 -$as_echo "$ac_cv_search_clock_gettime" >&6; } -ac_res=$ac_cv_search_clock_gettime -if test "$ac_res" != no; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_pidfile_open" >&5 +$as_echo "$ac_cv_search_pidfile_open" >&6; } +ac_res=$ac_cv_search_pidfile_open +if test "$ac_res" != no; then : test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" fi # Checks for header files. -{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then +if ${ac_cv_header_stdc+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <stdlib.h> #include <stdarg.h> @@ -20225,48 +12085,23 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_stdc=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_header_stdc=no + ac_cv_header_stdc=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <string.h> _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : + $EGREP "memchr" >/dev/null 2>&1; then : + else ac_cv_header_stdc=no fi @@ -20276,18 +12111,14 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <stdlib.h> _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : + $EGREP "free" >/dev/null 2>&1; then : + else ac_cv_header_stdc=no fi @@ -20297,14 +12128,10 @@ fi if test $ac_cv_header_stdc = yes; then # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : : else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <ctype.h> #include <stdlib.h> @@ -20331,64 +12158,31 @@ main () return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +if ac_fn_c_try_run "$LINENO"; then : -( exit $ac_status ) -ac_cv_header_stdc=no +else + ac_cv_header_stdc=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 $as_echo "$ac_cv_header_stdc" >&6; } if test $ac_cv_header_stdc = yes; then -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF +$as_echo "#define STDC_HEADERS 1" >>confdefs.h fi -{ $as_echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sys/wait.h that is POSIX.1 compatible" >&5 $as_echo_n "checking for sys/wait.h that is POSIX.1 compatible... " >&6; } -if test "${ac_cv_header_sys_wait_h+set}" = set; then +if ${ac_cv_header_sys_wait_h+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/types.h> #include <sys/wait.h> @@ -20409,190 +12203,26 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_sys_wait_h=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_header_sys_wait_h=no + ac_cv_header_sys_wait_h=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_sys_wait_h" >&5 $as_echo "$ac_cv_header_sys_wait_h" >&6; } if test $ac_cv_header_sys_wait_h = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_SYS_WAIT_H 1 -_ACEOF - -fi - +$as_echo "#define HAVE_SYS_WAIT_H 1" >>confdefs.h - - - - -for ac_header in endian.h mach/mach.h machine/endian.h sys/endian.h stdint.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ----------------------------------------------- ## -## Report this to trustedbsd-audit@TrustesdBSD.org ## -## ----------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -if test `eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` = yes; then +for ac_header in mach/mach.h stdint.h pthread_np.h printf.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF @@ -20603,32 +12233,26 @@ done -cat >>confdefs.h <<\_ACEOF -#define _GNU_SOURCE /**/ -_ACEOF +$as_echo "#define _GNU_SOURCE /**/" >>confdefs.h # Checks for typedefs, structures, and compiler characteristics. -{ $as_echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 $as_echo_n "checking for an ANSI C-conforming const... " >&6; } -if test "${ac_cv_c_const+set}" = set; then +if ${ac_cv_c_const+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ int main () { -/* FIXME: Include the comments suggested by Paul. */ + #ifndef __cplusplus - /* Ultrix mips cc rejects this. */ + /* Ultrix mips cc rejects this sort of thing. */ typedef int charset[2]; - const charset cs; + const charset cs = { 0, 0 }; /* SunOS 4.1.1 cc rejects this. */ char const *const *pcpcc; char **ppc; @@ -20645,8 +12269,9 @@ main () ++pcpcc; ppc = (char**) pcpcc; pcpcc = (char const *const *) ppc; - { /* SCO 3.2v4 cc rejects this. */ - char *t; + { /* SCO 3.2v4 cc rejects this sort of thing. */ + char tx; + char *t = &tx; char const *s = 0 ? (char *) 0 : (char const *) 0; *t++ = 0; @@ -20662,10 +12287,10 @@ main () iptr p = 0; ++p; } - { /* AIX XL C 1.02.0.0 rejects this saying + { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; }; - struct s *b; b->j = 5; + struct s { int j; const int *ap[3]; } bx; + struct s *b = &bx; b->j = 5; } { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ const int foo = 10; @@ -20678,60 +12303,33 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_c_const=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_c_const=no + ac_cv_c_const=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 $as_echo "$ac_cv_c_const" >&6; } if test $ac_cv_c_const = no; then -cat >>confdefs.h <<\_ACEOF -#define const /**/ -_ACEOF +$as_echo "#define const /**/" >>confdefs.h fi -{ $as_echo "$as_me:$LINENO: checking for uid_t in sys/types.h" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5 $as_echo_n "checking for uid_t in sys/types.h... " >&6; } -if test "${ac_cv_type_uid_t+set}" = set; then +if ${ac_cv_type_uid_t+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/types.h> _ACEOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "uid_t" >/dev/null 2>&1; then + $EGREP "uid_t" >/dev/null 2>&1; then : ac_cv_type_uid_t=yes else ac_cv_type_uid_t=no @@ -20739,117 +12337,20 @@ fi rm -f conftest* fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5 $as_echo "$ac_cv_type_uid_t" >&6; } if test $ac_cv_type_uid_t = no; then -cat >>confdefs.h <<\_ACEOF -#define uid_t int -_ACEOF +$as_echo "#define uid_t int" >>confdefs.h -cat >>confdefs.h <<\_ACEOF -#define gid_t int -_ACEOF +$as_echo "#define gid_t int" >>confdefs.h fi -{ $as_echo "$as_me:$LINENO: checking for pid_t" >&5 -$as_echo_n "checking for pid_t... " >&6; } -if test "${ac_cv_type_pid_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_type_pid_t=no -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof (pid_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof ((pid_t))) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default" +if test "x$ac_cv_type_pid_t" = xyes; then : - ac_cv_type_pid_t=yes -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5 -$as_echo "$ac_cv_type_pid_t" >&6; } -if test $ac_cv_type_pid_t = yes; then - : else cat >>confdefs.h <<_ACEOF @@ -20858,102 +12359,9 @@ _ACEOF fi -{ $as_echo "$as_me:$LINENO: checking for size_t" >&5 -$as_echo_n "checking for size_t... " >&6; } -if test "${ac_cv_type_size_t+set}" = set; then - $as_echo_n "(cached) " >&6 -else - ac_cv_type_size_t=no -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof (size_t)) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -if (sizeof ((size_t))) - return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_type_size_t=yes -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - -fi +ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" +if test "x$ac_cv_type_size_t" = xyes; then : -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5 -$as_echo "$ac_cv_type_size_t" >&6; } -if test $ac_cv_type_size_t = yes; then - : else cat >>confdefs.h <<_ACEOF @@ -20962,102 +12370,8 @@ _ACEOF fi -{ $as_echo "$as_me:$LINENO: checking for struct stat.st_rdev" >&5 -$as_echo_n "checking for struct stat.st_rdev... " >&6; } -if test "${ac_cv_member_struct_stat_st_rdev+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static struct stat ac_aggr; -if (ac_aggr.st_rdev) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_struct_stat_st_rdev=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static struct stat ac_aggr; -if (sizeof ac_aggr.st_rdev) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_struct_stat_st_rdev=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_member_struct_stat_st_rdev=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_rdev" >&5 -$as_echo "$ac_cv_member_struct_stat_st_rdev" >&6; } -if test $ac_cv_member_struct_stat_st_rdev = yes; then +ac_fn_c_check_member "$LINENO" "struct stat" "st_rdev" "ac_cv_member_struct_stat_st_rdev" "$ac_includes_default" +if test "x$ac_cv_member_struct_stat_st_rdev" = xyes; then : cat >>confdefs.h <<_ACEOF #define HAVE_STRUCT_STAT_ST_RDEV 1 @@ -21067,464 +12381,72 @@ _ACEOF fi -{ $as_echo "$as_me:$LINENO: checking for struct ipc_perm.__key" >&5 -$as_echo_n "checking for struct ipc_perm.__key... " >&6; } -if test "${ac_cv_member_struct_ipc_perm___key+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - +ac_fn_c_check_member "$LINENO" "struct ipc_perm" "__key" "ac_cv_member_struct_ipc_perm___key" " #include <sys/types.h> #include <sys/ipc.h> +" +if test "x$ac_cv_member_struct_ipc_perm___key" = xyes; then : -int -main () -{ -static struct ipc_perm ac_aggr; -if (ac_aggr.__key) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_struct_ipc_perm___key=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include <sys/types.h> -#include <sys/ipc.h> - - -int -main () -{ -static struct ipc_perm ac_aggr; -if (sizeof ac_aggr.__key) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_struct_ipc_perm___key=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_member_struct_ipc_perm___key=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_ipc_perm___key" >&5 -$as_echo "$ac_cv_member_struct_ipc_perm___key" >&6; } -if test $ac_cv_member_struct_ipc_perm___key = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_IPC_PERM___KEY /**/ -_ACEOF +$as_echo "#define HAVE_IPC_PERM___KEY /**/" >>confdefs.h fi -{ $as_echo "$as_me:$LINENO: checking for struct ipc_perm._key" >&5 -$as_echo_n "checking for struct ipc_perm._key... " >&6; } -if test "${ac_cv_member_struct_ipc_perm__key+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - +ac_fn_c_check_member "$LINENO" "struct ipc_perm" "_key" "ac_cv_member_struct_ipc_perm__key" " #include <sys/types.h> #include <sys/ipc.h> +" +if test "x$ac_cv_member_struct_ipc_perm__key" = xyes; then : -int -main () -{ -static struct ipc_perm ac_aggr; -if (ac_aggr._key) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_struct_ipc_perm__key=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include <sys/types.h> -#include <sys/ipc.h> - - -int -main () -{ -static struct ipc_perm ac_aggr; -if (sizeof ac_aggr._key) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_struct_ipc_perm__key=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_member_struct_ipc_perm__key=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_ipc_perm__key" >&5 -$as_echo "$ac_cv_member_struct_ipc_perm__key" >&6; } -if test $ac_cv_member_struct_ipc_perm__key = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_IPC_PERM__KEY /**/ -_ACEOF +$as_echo "#define HAVE_IPC_PERM__KEY /**/" >>confdefs.h fi -{ $as_echo "$as_me:$LINENO: checking for struct ipc_perm.__seq" >&5 -$as_echo_n "checking for struct ipc_perm.__seq... " >&6; } -if test "${ac_cv_member_struct_ipc_perm___seq+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include <sys/types.h> -#include <sys/ipc.h> - - -int -main () -{ -static struct ipc_perm ac_aggr; -if (ac_aggr.__seq) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_struct_ipc_perm___seq=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - +ac_fn_c_check_member "$LINENO" "struct ipc_perm" "__seq" "ac_cv_member_struct_ipc_perm___seq" " #include <sys/types.h> #include <sys/ipc.h> +" +if test "x$ac_cv_member_struct_ipc_perm___seq" = xyes; then : -int -main () -{ -static struct ipc_perm ac_aggr; -if (sizeof ac_aggr.__seq) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_struct_ipc_perm___seq=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_member_struct_ipc_perm___seq=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_ipc_perm___seq" >&5 -$as_echo "$ac_cv_member_struct_ipc_perm___seq" >&6; } -if test $ac_cv_member_struct_ipc_perm___seq = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_IPC_PERM___SEQ /**/ -_ACEOF +$as_echo "#define HAVE_IPC_PERM___SEQ /**/" >>confdefs.h fi -{ $as_echo "$as_me:$LINENO: checking for struct ipc_perm._seq" >&5 -$as_echo_n "checking for struct ipc_perm._seq... " >&6; } -if test "${ac_cv_member_struct_ipc_perm__seq+set}" = set; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - +ac_fn_c_check_member "$LINENO" "struct ipc_perm" "_seq" "ac_cv_member_struct_ipc_perm__seq" " #include <sys/types.h> #include <sys/ipc.h> +" +if test "x$ac_cv_member_struct_ipc_perm__seq" = xyes; then : -int -main () -{ -static struct ipc_perm ac_aggr; -if (ac_aggr._seq) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_struct_ipc_perm__seq=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#include <sys/types.h> -#include <sys/ipc.h> - - -int -main () -{ -static struct ipc_perm ac_aggr; -if (sizeof ac_aggr._seq) -return 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_cv_member_struct_ipc_perm__seq=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +$as_echo "#define HAVE_IPC_PERM__SEQ /**/" >>confdefs.h - ac_cv_member_struct_ipc_perm__seq=no fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_member_struct_ipc_perm__seq" >&5 -$as_echo "$ac_cv_member_struct_ipc_perm__seq" >&6; } -if test $ac_cv_member_struct_ipc_perm__seq = yes; then +ac_fn_c_check_member "$LINENO" "struct sockaddr_storage" "ss_len" "ac_cv_member_struct_sockaddr_storage_ss_len" " +#include <sys/types.h> +#include <sys/socket.h> -cat >>confdefs.h <<\_ACEOF -#define HAVE_IPC_PERM__SEQ /**/ -_ACEOF +" +if test "x$ac_cv_member_struct_sockaddr_storage_ss_len" = xyes; then : + +$as_echo "#define HAVE_SOCKADDR_STORAGE_SS_LEN /**/" >>confdefs.h fi -{ $as_echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5 $as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; } -if test "${ac_cv_header_time+set}" = set; then +if ${ac_cv_header_time+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/types.h> #include <sys/time.h> @@ -21539,54 +12461,27 @@ return 0; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_header_time=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_header_time=no + ac_cv_header_time=no fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5 $as_echo "$ac_cv_header_time" >&6; } if test $ac_cv_header_time = yes; then -cat >>confdefs.h <<\_ACEOF -#define TIME_WITH_SYS_TIME 1 -_ACEOF +$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h fi -{ $as_echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5 $as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; } -if test "${ac_cv_struct_tm+set}" = set; then +if ${ac_cv_struct_tm+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/types.h> #include <time.h> @@ -21601,209 +12496,44 @@ struct tm tm; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_struct_tm=time.h else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_struct_tm=sys/time.h + ac_cv_struct_tm=sys/time.h fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5 $as_echo "$ac_cv_struct_tm" >&6; } if test $ac_cv_struct_tm = sys/time.h; then -cat >>confdefs.h <<\_ACEOF -#define TM_IN_SYS_TIME 1 -_ACEOF +$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h fi # Checks for library functions. - for ac_header in unistd.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ----------------------------------------------- ## -## Report this to trustedbsd-audit@TrustesdBSD.org ## -## ----------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -if test `eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` = yes; then +do : + ac_fn_c_check_header_mongrel "$LINENO" "unistd.h" "ac_cv_header_unistd_h" "$ac_includes_default" +if test "x$ac_cv_header_unistd_h" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_UNISTD_H 1 _ACEOF fi done -{ $as_echo "$as_me:$LINENO: checking for working chown" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working chown" >&5 $as_echo_n "checking for working chown... " >&6; } -if test "${ac_cv_func_chown_works+set}" = set; then +if ${ac_cv_func_chown_works+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : ac_cv_func_chown_works=no else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default #include <fcntl.h> @@ -21828,299 +12558,43 @@ main () return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_chown_works=yes else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_chown_works=no + ac_cv_func_chown_works=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - rm -f conftest.chown fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_chown_works" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_chown_works" >&5 $as_echo "$ac_cv_func_chown_works" >&6; } if test $ac_cv_func_chown_works = yes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_CHOWN 1 -_ACEOF +$as_echo "#define HAVE_CHOWN 1" >>confdefs.h fi - for ac_header in vfork.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ----------------------------------------------- ## -## Report this to trustedbsd-audit@TrustesdBSD.org ## -## ----------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -if test `eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` = yes; then +do : + ac_fn_c_check_header_mongrel "$LINENO" "vfork.h" "ac_cv_header_vfork_h" "$ac_includes_default" +if test "x$ac_cv_header_vfork_h" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_VFORK_H 1 _ACEOF fi done - - for ac_func in fork vfork -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if test `eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` = yes; then +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -22129,19 +12603,15 @@ fi done if test "x$ac_cv_func_fork" = xyes; then - { $as_echo "$as_me:$LINENO: checking for working fork" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working fork" >&5 $as_echo_n "checking for working fork... " >&6; } -if test "${ac_cv_func_fork_works+set}" = set; then +if ${ac_cv_func_fork_works+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : ac_cv_func_fork_works=cross else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int @@ -22155,44 +12625,17 @@ main () return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_fork_works=yes else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_fork_works=no + ac_cv_func_fork_works=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_fork_works" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_fork_works" >&5 $as_echo "$ac_cv_func_fork_works" >&6; } else @@ -22208,24 +12651,20 @@ if test "x$ac_cv_func_fork_works" = xcross; then ac_cv_func_fork_works=yes ;; esac - { $as_echo "$as_me:$LINENO: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&5 $as_echo "$as_me: WARNING: result $ac_cv_func_fork_works guessed because of cross compilation" >&2;} fi ac_cv_func_vfork_works=$ac_cv_func_vfork if test "x$ac_cv_func_vfork" = xyes; then - { $as_echo "$as_me:$LINENO: checking for working vfork" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working vfork" >&5 $as_echo_n "checking for working vfork... " >&6; } -if test "${ac_cv_func_vfork_works+set}" = set; then +if ${ac_cv_func_vfork_works+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : ac_cv_func_vfork_works=cross else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Thanks to Paul Eggert for this test. */ $ac_includes_default @@ -22317,237 +12756,62 @@ main () } } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_vfork_works=yes else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_vfork_works=no + ac_cv_func_vfork_works=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_vfork_works" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_vfork_works" >&5 $as_echo "$ac_cv_func_vfork_works" >&6; } fi; if test "x$ac_cv_func_fork_works" = xcross; then ac_cv_func_vfork_works=$ac_cv_func_vfork - { $as_echo "$as_me:$LINENO: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&5 $as_echo "$as_me: WARNING: result $ac_cv_func_vfork_works guessed because of cross compilation" >&2;} fi if test "x$ac_cv_func_vfork_works" = xyes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_WORKING_VFORK 1 -_ACEOF +$as_echo "#define HAVE_WORKING_VFORK 1" >>confdefs.h else -cat >>confdefs.h <<\_ACEOF -#define vfork fork -_ACEOF +$as_echo "#define vfork fork" >>confdefs.h fi if test "x$ac_cv_func_fork_works" = xyes; then -cat >>confdefs.h <<\_ACEOF -#define HAVE_WORKING_FORK 1 -_ACEOF +$as_echo "#define HAVE_WORKING_FORK 1" >>confdefs.h fi - for ac_header in stdlib.h -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ----------------------------------------------- ## -## Report this to trustedbsd-audit@TrustesdBSD.org ## -## ----------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -if test `eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` = yes; then +do : + ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default" +if test "x$ac_cv_header_stdlib_h" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +#define HAVE_STDLIB_H 1 _ACEOF fi done -{ $as_echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5 $as_echo_n "checking for GNU libc compatible malloc... " >&6; } -if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then +if ${ac_cv_func_malloc_0_nonnull+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : ac_cv_func_malloc_0_nonnull=no else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #if defined STDC_HEADERS || defined HAVE_STDLIB_H # include <stdlib.h> @@ -22563,55 +12827,24 @@ return ! malloc (0); return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_malloc_0_nonnull=yes else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_malloc_0_nonnull=no + ac_cv_func_malloc_0_nonnull=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5 $as_echo "$ac_cv_func_malloc_0_nonnull" >&6; } -if test $ac_cv_func_malloc_0_nonnull = yes; then +if test $ac_cv_func_malloc_0_nonnull = yes; then : -cat >>confdefs.h <<\_ACEOF -#define HAVE_MALLOC 1 -_ACEOF +$as_echo "#define HAVE_MALLOC 1" >>confdefs.h else - cat >>confdefs.h <<\_ACEOF -#define HAVE_MALLOC 0 -_ACEOF + $as_echo "#define HAVE_MALLOC 0" >>confdefs.h case " $LIBOBJS " in *" malloc.$ac_objext "* ) ;; @@ -22620,9 +12853,7 @@ _ACEOF esac -cat >>confdefs.h <<\_ACEOF -#define malloc rpl_malloc -_ACEOF +$as_echo "#define malloc rpl_malloc" >>confdefs.h fi @@ -22630,149 +12861,12 @@ fi - - -for ac_header in $ac_header_list -do -as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 -$as_echo_n "checking $ac_header usability... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then - ac_header_compiler=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_compiler=no -fi - -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 -$as_echo_n "checking $ac_header presence... " >&6; } -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then - ac_header_preproc=yes -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi - -rm -f conftest.err conftest.$ac_ext -{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( cat <<\_ASBOX -## ----------------------------------------------- ## -## Report this to trustedbsd-audit@TrustesdBSD.org ## -## ----------------------------------------------- ## -_ASBOX - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 -$as_echo_n "checking for $ac_header... " >&6; } -if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -ac_res=`eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - -fi -if test `eval 'as_val=${'$as_ac_Header'} - $as_echo "$as_val"'` = yes; then + for ac_header in $ac_header_list +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 _ACEOF @@ -22788,99 +12882,11 @@ done - -for ac_func in $ac_func_list -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if test `eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` = yes; then + for ac_func in $ac_func_list +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -22892,31 +12898,15 @@ done - - - - - - - - - - - - -{ $as_echo "$as_me:$LINENO: checking for working mktime" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working mktime" >&5 $as_echo_n "checking for working mktime... " >&6; } -if test "${ac_cv_func_working_mktime+set}" = set; then +if ${ac_cv_func_working_mktime+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : ac_cv_func_working_mktime=no else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Test program from Paul Eggert and Tony Leneis. */ #ifdef TIME_WITH_SYS_TIME @@ -22948,8 +12938,8 @@ static time_t time_t_max; static time_t time_t_min; /* Values we'll use to set the TZ environment variable. */ -static char *tz_strings[] = { - (char *) 0, "TZ=GMT0", "TZ=JST-9", +static const char *tz_strings[] = { + (const char *) 0, "TZ=GMT0", "TZ=JST-9", "TZ=EST+3EDT+2,M10.1.0/00:00:00,M2.3.0/00:00:00" }; #define N_STRINGS (sizeof (tz_strings) / sizeof (tz_strings[0])) @@ -22966,7 +12956,7 @@ spring_forward_gap () instead of "TZ=America/Vancouver" in order to detect the bug even on systems that don't support the Olson extension, or don't have the full zoneinfo tables installed. */ - putenv ("TZ=PST8PDT,M4.1.0,M10.5.0"); + putenv ((char*) "TZ=PST8PDT,M4.1.0,M10.5.0"); tm.tm_year = 98; tm.tm_mon = 3; @@ -22979,16 +12969,14 @@ spring_forward_gap () } static int -mktime_test1 (now) - time_t now; +mktime_test1 (time_t now) { struct tm *lt; return ! (lt = localtime (&now)) || mktime (lt) == now; } static int -mktime_test (now) - time_t now; +mktime_test (time_t now) { return (mktime_test1 (now) && mktime_test1 ((time_t) (time_t_max - now)) @@ -23012,8 +13000,7 @@ irix_6_4_bug () } static int -bigtime_test (j) - int j; +bigtime_test (int j) { struct tm tm; time_t now; @@ -23057,7 +13044,7 @@ year_2050_test () instead of "TZ=America/Vancouver" in order to detect the bug even on systems that don't support the Olson extension, or don't have the full zoneinfo tables installed. */ - putenv ("TZ=PST8PDT,M4.1.0,M10.5.0"); + putenv ((char*) "TZ=PST8PDT,M4.1.0,M10.5.0"); t = mktime (&tm); @@ -23092,7 +13079,7 @@ main () for (i = 0; i < N_STRINGS; i++) { if (tz_strings[i]) - putenv (tz_strings[i]); + putenv ((char*) tz_strings[i]); for (t = 0; t <= time_t_max - delta; t += delta) if (! mktime_test (t)) @@ -23113,44 +13100,17 @@ main () return ! (irix_6_4_bug () && spring_forward_gap () && year_2050_test ()); } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_working_mktime=yes else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_working_mktime=no + ac_cv_func_working_mktime=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_working_mktime" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_working_mktime" >&5 $as_echo "$ac_cv_func_working_mktime" >&6; } if test $ac_cv_func_working_mktime = no; then case " $LIBOBJS " in @@ -23161,16 +13121,12 @@ esac fi -{ $as_echo "$as_me:$LINENO: checking return type of signal handlers" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5 $as_echo_n "checking return type of signal handlers... " >&6; } -if test "${ac_cv_type_signal+set}" = set; then +if ${ac_cv_type_signal+:} false; then : $as_echo_n "(cached) " >&6 else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/types.h> #include <signal.h> @@ -23183,35 +13139,14 @@ return *(signal (0, 0)) (0) == 1; return 0; } _ACEOF -rm -f conftest.$ac_objext -if { (ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_compile") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then +if ac_fn_c_try_compile "$LINENO"; then : ac_cv_type_signal=int else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_type_signal=void + ac_cv_type_signal=void fi - rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5 $as_echo "$ac_cv_type_signal" >&6; } cat >>confdefs.h <<_ACEOF @@ -23219,29 +13154,25 @@ cat >>confdefs.h <<_ACEOF _ACEOF -{ $as_echo "$as_me:$LINENO: checking whether lstat dereferences a symlink specified with a trailing slash" >&5 -$as_echo_n "checking whether lstat dereferences a symlink specified with a trailing slash... " >&6; } -if test "${ac_cv_func_lstat_dereferences_slashed_symlink+set}" = set; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether lstat correctly handles trailing slash" >&5 +$as_echo_n "checking whether lstat correctly handles trailing slash... " >&6; } +if ${ac_cv_func_lstat_dereferences_slashed_symlink+:} false; then : $as_echo_n "(cached) " >&6 else rm -f conftest.sym conftest.file echo >conftest.file if test "$as_ln_s" = "ln -s" && ln -s conftest.file conftest.sym; then - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : ac_cv_func_lstat_dereferences_slashed_symlink=no else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int main () { struct stat sbuf; - /* Linux will dereference the symlink and fail. + /* Linux will dereference the symlink and fail, as required by POSIX. That is better in the sense that it means we will not have to compile and use the lstat wrapper. */ return lstat ("conftest.sym/", &sbuf) == 0; @@ -23249,42 +13180,15 @@ struct stat sbuf; return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_lstat_dereferences_slashed_symlink=yes else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_lstat_dereferences_slashed_symlink=no + ac_cv_func_lstat_dereferences_slashed_symlink=no fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - else # If the `ln -s' command failed, then we probably don't even # have an lstat function. @@ -23293,7 +13197,7 @@ fi rm -f conftest.sym conftest.file fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_lstat_dereferences_slashed_symlink" >&5 $as_echo "$ac_cv_func_lstat_dereferences_slashed_symlink" >&6; } test $ac_cv_func_lstat_dereferences_slashed_symlink = yes && @@ -23303,7 +13207,7 @@ cat >>confdefs.h <<_ACEOF _ACEOF -if test $ac_cv_func_lstat_dereferences_slashed_symlink = no; then +if test "x$ac_cv_func_lstat_dereferences_slashed_symlink" = xno; then case " $LIBOBJS " in *" lstat.$ac_objext "* ) ;; *) LIBOBJS="$LIBOBJS lstat.$ac_objext" @@ -23312,19 +13216,15 @@ esac fi -{ $as_echo "$as_me:$LINENO: checking whether stat accepts an empty string" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat accepts an empty string" >&5 $as_echo_n "checking whether stat accepts an empty string... " >&6; } -if test "${ac_cv_func_stat_empty_string_bug+set}" = set; then +if ${ac_cv_func_stat_empty_string_bug+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then + if test "$cross_compiling" = yes; then : ac_cv_func_stat_empty_string_bug=yes else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ $ac_includes_default int @@ -23336,44 +13236,17 @@ struct stat sbuf; return 0; } _ACEOF -rm -f conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then +if ac_fn_c_try_run "$LINENO"; then : ac_cv_func_stat_empty_string_bug=no else - $as_echo "$as_me: program exited with status $ac_status" >&5 -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_func_stat_empty_string_bug=yes + ac_cv_func_stat_empty_string_bug=yes fi -rm -rf conftest.dSYM -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext fi - fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_stat_empty_string_bug" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_stat_empty_string_bug" >&5 $as_echo "$ac_cv_func_stat_empty_string_bug" >&6; } if test $ac_cv_func_stat_empty_string_bug = yes; then case " $LIBOBJS " in @@ -23389,117 +13262,24 @@ _ACEOF fi - for ac_func in strftime -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if test `eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` = yes; then +do : + ac_fn_c_check_func "$LINENO" "strftime" "ac_cv_func_strftime" +if test "x$ac_cv_func_strftime" = xyes; then : cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +#define HAVE_STRFTIME 1 _ACEOF else # strftime is in -lintl on SCO UNIX. -{ $as_echo "$as_me:$LINENO: checking for strftime in -lintl" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for strftime in -lintl" >&5 $as_echo_n "checking for strftime in -lintl... " >&6; } -if test "${ac_cv_lib_intl_strftime+set}" = set; then +if ${ac_cv_lib_intl_strftime+:} false; then : $as_echo_n "(cached) " >&6 else ac_check_lib_save_LIBS=$LIBS LIBS="-lintl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ /* Override any GCC internal prototype to avoid an error. @@ -23517,46 +13297,19 @@ return strftime (); return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : ac_cv_lib_intl_strftime=yes else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_cv_lib_intl_strftime=no + ac_cv_lib_intl_strftime=no fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext LIBS=$ac_check_lib_save_LIBS fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_intl_strftime" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_intl_strftime" >&5 $as_echo "$ac_cv_lib_intl_strftime" >&6; } -if test $ac_cv_lib_intl_strftime = yes; then - cat >>confdefs.h <<\_ACEOF -#define HAVE_STRFTIME 1 -_ACEOF +if test "x$ac_cv_lib_intl_strftime" = xyes; then : + $as_echo "#define HAVE_STRFTIME 1" >>confdefs.h LIBS="-lintl $LIBS" fi @@ -23564,113 +13317,11 @@ fi fi done - - - - - - - - - - - - - - - -for ac_func in bzero clock_gettime ftruncate gettimeofday inet_ntoa memset strchr strerror strlcat strlcpy strrchr strstr strtol strtoul pthread_mutex_lock -do -as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 -$as_echo_n "checking for $ac_func... " >&6; } -if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then - $as_echo_n "(cached) " >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef $ac_func - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$ac_func || defined __stub___$ac_func -choke me -#endif - -int -main () -{ -return $ac_func (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - eval "$as_ac_var=yes" -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - eval "$as_ac_var=no" -fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext -fi -ac_res=`eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` - { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if test `eval 'as_val=${'$as_ac_var'} - $as_echo "$as_val"'` = yes; then +for ac_func in arc4random arc4random_buf bzero cap_enter clock_gettime closefrom faccessat fdopendir fstatat ftruncate getresgid getresuid gettimeofday inet_ntoa jail kqueue memset openat pthread_cond_timedwait_relative_np pthread_condattr_setclock pthread_mutex_lock renameat setproctitle sigtimedwait strchr strerror strlcat strlcpy strndup strrchr strstr strtol strtoul unlinkat vis +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : cat >>confdefs.h <<_ACEOF #define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 _ACEOF @@ -23682,11 +13333,7 @@ done # sys/queue.h exists on most systems, but its capabilities vary a great deal. # test for LIST_FIRST and TAILQ_FOREACH_SAFE, which appears to not exist in # all of them, and are necessary for OpenBSM. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <sys/queue.h> @@ -23707,53 +13354,20 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then - - -cat >>confdefs.h <<\_ACEOF -#define HAVE_FULL_QUEUE_H /**/ -_ACEOF +if ac_fn_c_try_link "$LINENO"; then : -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 +$as_echo "#define HAVE_FULL_QUEUE_H /**/" >>confdefs.h fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext # Systems may not define key audit system calls, in which case libbsm cannot # depend on them or it will generate link-time or run-time errors. Test for # just one. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ #include <stddef.h> @@ -23772,47 +13386,20 @@ main () return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : -cat >>confdefs.h <<\_ACEOF -#define HAVE_AUDIT_SYSCALLS /**/ -_ACEOF +$as_echo "#define HAVE_AUDIT_SYSCALLS /**/" >>confdefs.h have_audit_syscalls=true else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - have_audit_syscalls=false fi - -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext if $have_audit_syscalls; then HAVE_AUDIT_SYSCALLS_TRUE= HAVE_AUDIT_SYSCALLS_FALSE='#' @@ -23823,94 +13410,201 @@ fi # -# There are a wide variety of endian macros and functions in the wild; we try -# to use the native support if it defines be32enc(), but otherwise have to -# use our own. +# We rely on the BSD be32toh() and be32enc()-style endian macros to perform +# byte order conversions. Availability of these varies considerably -- in +# general, a system might have neither, be32toh(), or be32toh() and be32enc(). +# There is also variation in which headers are even present, and whether they +# are macros or functions. Try to organise the world into some simpler cases. +# The following macros may be set at the end: +# +# USE_ENDIAN_H +# USE_SYS_ENDIAN_H +# USE_MACHINE_ENDIAN_H +# USE_COMPAT_ENDIAN_H +# USE_COMPAT_ENDIAN_ENC_H +# +# First, decide which system endian.h to use. # -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ +for ac_header in endian.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "endian.h" "ac_cv_header_endian_h" "$ac_includes_default" +if test "x$ac_cv_header_endian_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_ENDIAN_H 1 +_ACEOF + + have_endian_h=yes + +else + + have_endian_h=no + +fi + +done + + +for ac_header in sys/endian.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "sys/endian.h" "ac_cv_header_sys_endian_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_endian_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_ENDIAN_H 1 _ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF + + have_sys_endian_h=yes + +else + + have_sys_endian_h=no + +fi + +done + + +for ac_header in machine/endian.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "machine/endian.h" "ac_cv_header_machine_endian_h" "$ac_includes_default" +if test "x$ac_cv_header_machine_endian_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_MACHINE_ENDIAN_H 1 +_ACEOF + + have_machine_endian_h=yes + +else + + have_machine_endian_h=no + +fi + +done + + +if test $have_endian_h = yes; then + +$as_echo "#define USE_ENDIAN_H /**/" >>confdefs.h + +elif test $have_sys_endian_h = yes; then + +$as_echo "#define USE_SYS_ENDIAN_H /**/" >>confdefs.h + +elif test $have_machine_endian_h = yes; then + +$as_echo "#define USE_MACHINE_ENDIAN_H /**/" >>confdefs.h + +else + as_fn_error $? "no endian.h" "$LINENO" 5 +fi + +# +# Next, decide if we need to supplement with compat headers. +# +cat confdefs.h - <<_ACEOF >conftest.$ac_ext /* end confdefs.h. */ + #ifdef USE_ENDIAN_H + #include <endian.h> + #endif + #ifdef USE_SYS_ENDIAN_H #include <sys/endian.h> - #include <stdlib.h> + #endif + #ifdef USE_MACHINE_ENDIAN_H + #include <machine/endian.h> + #endif int main () { - be32enc(NULL, 1); + (void)be32toh(0); ; return 0; } _ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" -$as_echo "$ac_try_echo") >&5 - (eval "$ac_link") 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then +if ac_fn_c_try_link "$LINENO"; then : + +else -cat >>confdefs.h <<\_ACEOF -#define HAVE_BE32ENC /**/ -_ACEOF +$as_echo "#define USE_COMPAT_ENDIAN_H /**/" >>confdefs.h + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: using compat/endian.h" >&5 +$as_echo "using compat/endian.h" >&6; } +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #ifdef USE_ENDIAN_H + #include <endian.h> + #endif + #ifdef USE_SYS_ENDIAN_H + #include <sys/endian.h> + #endif + #ifdef USE_MACHINE_ENDIAN_H + #include <machine/endian.h> + #endif + #ifdef USE_COMPAT_ENDIAN_H + #include "compat/endian.h" + #endif + #include <stdlib.h> + +int +main () +{ + + bswap16(0); + bswap32(0); + bswap64(0); + be32enc(NULL, 0); + htole64(0); + le64toh(0); + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 -fi +$as_echo "#define USE_COMPAT_ENDIAN_ENC_H /**/" >>confdefs.h -rm -rf conftest.dSYM -rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ - conftest$ac_exeext conftest.$ac_ext + { $as_echo "$as_me:${as_lineno-$LINENO}: result: using compat/endian_enc.h" >&5 +$as_echo "using compat/endian_enc.h" >&6; } + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext # Check to see if Mach IPC is used for trigger messages. If so, use Mach IPC # instead of the default for sending trigger messages to the audit components. -{ $as_echo "$as_me:$LINENO: checking for /usr/include/mach/audit_triggers.defs" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for /usr/include/mach/audit_triggers.defs" >&5 $as_echo_n "checking for /usr/include/mach/audit_triggers.defs... " >&6; } -if test "${ac_cv_file__usr_include_mach_audit_triggers_defs+set}" = set; then +if ${ac_cv_file__usr_include_mach_audit_triggers_defs+:} false; then : $as_echo_n "(cached) " >&6 else test "$cross_compiling" = yes && - { { $as_echo "$as_me:$LINENO: error: cannot check for file existence when cross compiling" >&5 -$as_echo "$as_me: error: cannot check for file existence when cross compiling" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "cannot check for file existence when cross compiling" "$LINENO" 5 if test -r "/usr/include/mach/audit_triggers.defs"; then ac_cv_file__usr_include_mach_audit_triggers_defs=yes else ac_cv_file__usr_include_mach_audit_triggers_defs=no fi fi -{ $as_echo "$as_me:$LINENO: result: $ac_cv_file__usr_include_mach_audit_triggers_defs" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_file__usr_include_mach_audit_triggers_defs" >&5 $as_echo "$ac_cv_file__usr_include_mach_audit_triggers_defs" >&6; } -if test $ac_cv_file__usr_include_mach_audit_triggers_defs = yes; then +if test "x$ac_cv_file__usr_include_mach_audit_triggers_defs" = xyes; then : -cat >>confdefs.h <<\_ACEOF -#define USE_MACH_IPC /**/ -_ACEOF +$as_echo "#define USE_MACH_IPC /**/" >>confdefs.h use_mach_ipc=true @@ -23929,7 +13623,7 @@ else fi -ac_config_files="$ac_config_files Makefile bin/Makefile bin/audit/Makefile bin/auditd/Makefile bin/auditfilterd/Makefile bin/auditreduce/Makefile bin/praudit/Makefile bsm/Makefile libauditd/Makefile libbsm/Makefile modules/Makefile modules/auditfilter_noop/Makefile man/Makefile sys/Makefile sys/bsm/Makefile test/Makefile test/bsm/Makefile tools/Makefile" +ac_config_files="$ac_config_files Makefile bin/Makefile bin/audit/Makefile bin/auditd/Makefile bin/auditdistd/Makefile bin/auditfilterd/Makefile bin/auditreduce/Makefile bin/praudit/Makefile bsm/Makefile libauditd/Makefile libbsm/Makefile modules/Makefile modules/auditfilter_noop/Makefile man/Makefile sys/Makefile sys/bsm/Makefile test/Makefile test/bsm/Makefile tools/Makefile" cat >confcache <<\_ACEOF @@ -23959,13 +13653,13 @@ _ACEOF case $ac_val in #( *${as_nl}*) case $ac_var in #( - *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -$as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; esac case $ac_var in #( _ | IFS | as_nl) ;; #( BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) $as_unset $ac_var ;; + *) { eval $ac_var=; unset $ac_var;} ;; esac ;; esac done @@ -23973,8 +13667,8 @@ $as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; (set) 2>&1 | case $as_nl`(ac_space=' '; set) 2>&1` in #( *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. sed -n \ "s/'/'\\\\''/g; s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" @@ -23996,12 +13690,23 @@ $as_echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; :end' >>confcache if diff "$cache_file" confcache >/dev/null 2>&1; then :; else if test -w "$cache_file"; then - test "x$cache_file" != "x/dev/null" && - { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 $as_echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi else - { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 $as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} fi fi @@ -24015,14 +13720,15 @@ DEFS=-DHAVE_CONFIG_H ac_libobjs= ac_ltlibobjs= +U= for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue # 1. Remove the extension, and $U if already installed. ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ac_i=`$as_echo "$ac_i" | sed "$ac_script"` # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR # will be set to the directory where LIBOBJS objects are built. - ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' done LIBOBJS=$ac_libobjs @@ -24030,62 +13736,54 @@ LTLIBOBJS=$ac_ltlibobjs if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${USE_NATIVE_INCLUDES_TRUE}" && test -z "${USE_NATIVE_INCLUDES_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"USE_NATIVE_INCLUDES\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"USE_NATIVE_INCLUDES\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi + as_fn_error $? "conditional \"USE_NATIVE_INCLUDES\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + if test -z "${HAVE_AUDIT_SYSCALLS_TRUE}" && test -z "${HAVE_AUDIT_SYSCALLS_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"HAVE_AUDIT_SYSCALLS\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"HAVE_AUDIT_SYSCALLS\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "conditional \"HAVE_AUDIT_SYSCALLS\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi if test -z "${USE_MACH_IPC_TRUE}" && test -z "${USE_MACH_IPC_FALSE}"; then - { { $as_echo "$as_me:$LINENO: error: conditional \"USE_MACH_IPC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -$as_echo "$as_me: error: conditional \"USE_MACH_IPC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "conditional \"USE_MACH_IPC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 fi -: ${CONFIG_STATUS=./config.status} +: "${CONFIG_STATUS=./config.status}" ac_write_fail=0 ac_clean_files_save=$ac_clean_files ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 $as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 #! $SHELL # Generated by $as_me. # Run this file to recreate the current configuration. @@ -24095,17 +13793,18 @@ cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 debug=false ac_cs_recheck=false ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## # Be more Bourne compatible DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : emulate sh NULLCMD=: # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which @@ -24113,23 +13812,15 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then alias -g '${1+"$@"}'='"$@"' setopt NO_GLOB_SUBST else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; esac - fi - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - as_nl=' ' export as_nl @@ -24137,7 +13828,13 @@ export as_nl as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then as_echo='printf %s\n' as_echo_n='printf %s' else @@ -24148,7 +13845,7 @@ else as_echo_body='eval expr "X$1" : "X\\(.*\\)"' as_echo_n_body='eval arg=$1; - case $arg in + case $arg in #( *"$as_nl"*) expr "X$arg" : "X\\(.*\\)$as_nl"; arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; @@ -24171,13 +13868,6 @@ if test "${PATH_SEPARATOR+set}" != set; then } fi -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - # IFS # We need space, tab and new line, in precisely that order. Quoting is @@ -24187,15 +13877,16 @@ fi IFS=" "" $as_nl" # Find who we are. Look in the path if we contain no directory separator. -case $0 in +as_myself= +case $0 in #(( *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done IFS=$as_save_IFS ;; @@ -24207,12 +13898,16 @@ if test "x$as_myself" = x; then fi if test ! -f "$as_myself"; then $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } + exit 1 fi -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : done PS1='$ ' PS2='> ' @@ -24224,7 +13919,89 @@ export LC_ALL LANGUAGE=C export LANGUAGE -# Required to use basename. +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + if expr a : '\(a\)' >/dev/null 2>&1 && test "X`expr 00001 : '.*\(...\)'`" = X001; then as_expr=expr @@ -24238,8 +14015,12 @@ else as_basename=false fi +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi -# Name of the executable. as_me=`$as_basename -- "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ @@ -24259,76 +14040,25 @@ $as_echo X/"$0" | } s/.*/./; q'` -# CDPATH. -$as_unset CDPATH - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in +case `echo -n x` in #((((( -n*) - case `echo 'x\c'` in + case `echo 'xy\c'` in *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; esac;; *) ECHO_N='-n';; esac -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi rm -f conf$$ conf$$.exe conf$$.file if test -d conf$$.dir; then @@ -24343,49 +14073,85 @@ if (echo >conf$$.file) 2>/dev/null; then # ... but there are two gotchas: # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. + # In both cases, we have to default to `cp -pR'. ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' + as_ln_s='cp -pR' elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi else - as_ln_s='cp -p' + as_ln_s='cp -pR' fi rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file rmdir conf$$.dir 2>/dev/null + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p if mkdir -p . 2>/dev/null; then - as_mkdir_p=: + as_mkdir_p='mkdir -p "$as_dir"' else test -d ./-p && rmdir ./-p as_mkdir_p=false fi -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" @@ -24395,13 +14161,19 @@ as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 -# Save the log message, to keep $[0] and so on meaningful, and to +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by OpenBSM $as_me 1.1p2, which was -generated by GNU Autoconf 2.62. Invocation command line was +This file was extended by OpenBSM $as_me 1.2alpha2, which was +generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS @@ -24414,6 +14186,15 @@ on `(hostname || uname -n) 2>/dev/null | sed 1q` _ACEOF +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" @@ -24424,19 +14205,22 @@ _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. -Usage: $0 [OPTIONS] [FILE]... +Usage: $0 [OPTION]... [TAG]... -h, --help print this help, then exit -V, --version print version number and configuration settings, then exit - -q, --quiet do not print progress messages + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] + --file=FILE[:TEMPLATE] instantiate the configuration file FILE - --header=FILE[:TEMPLATE] + --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: @@ -24448,16 +14232,17 @@ $config_headers Configuration commands: $config_commands -Report bugs to <bug-autoconf@gnu.org>." +Report bugs to <trustedbsd-audit@TrustesdBSD.org>." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -OpenBSM config.status 1.1p2 -configured by $0, generated by GNU Autoconf 2.62, - with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" +OpenBSM config.status 1.2alpha2 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" -Copyright (C) 2008 Free Software Foundation, Inc. +Copyright (C) 2012 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." @@ -24475,11 +14260,16 @@ ac_need_defaults=: while test $# != 0 do case $1 in - --*=*) + --*=?*) ac_option=`expr "X$1" : 'X\([^=]*\)='` ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` ac_shift=: ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; *) ac_option=$1 ac_optarg=$2 @@ -24493,27 +14283,29 @@ do ac_cs_recheck=: ;; --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; --debug | --debu | --deb | --de | --d | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; esac - CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" + as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift case $ac_optarg in *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; esac - CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" + as_fn_append CONFIG_HEADERS " '$ac_optarg'" ac_need_defaults=false;; --he | --h) # Conflict between --help and --header - { $as_echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; };; + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ @@ -24521,11 +14313,10 @@ Try \`$0 --help' for more information." >&2 ac_cs_silent=: ;; # This is an error. - -*) { $as_echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; - *) ac_config_targets="$ac_config_targets $1" + *) as_fn_append ac_config_targets " $1" ac_need_defaults=false ;; esac @@ -24542,7 +14333,7 @@ fi _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion shift \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 CONFIG_SHELL='$SHELL' @@ -24566,6 +14357,283 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # # INIT-COMMANDS # + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' +macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' +enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' +pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' +SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' +ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' +host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' +host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' +host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' +build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' +build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' +build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' +SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' +Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' +GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' +EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' +FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' +LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' +NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' +LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' +ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' +exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' +lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' +lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' +lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' +reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' +file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' +want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' +DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' +sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' +AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' +archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' +STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' +RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' +lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' +CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' +compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' +GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' +nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' +lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' +objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' +need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' +MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' +LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' +OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' +libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' +module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' +postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' +need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' +version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' +runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' +libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' +soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' +install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' +finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' +old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' +striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in SHELL \ +ECHO \ +PATH_SEPARATOR \ +SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +OBJDUMP \ +deplibs_check_method \ +file_magic_cmd \ +file_magic_glob \ +want_nocaseglob \ +DLLTOOL \ +sharedlib_from_linklib_cmd \ +AR \ +AR_FLAGS \ +archiver_list_spec \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +nm_file_list_spec \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_pic \ +lt_prog_compiler_wl \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +MANIFEST_TOOL \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_separator \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +install_override_mode \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postlink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec; do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' + + + AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" _ACEOF @@ -24577,11 +14645,13 @@ for ac_config_target in $ac_config_targets do case $ac_config_target in "config/config.h") CONFIG_HEADERS="$CONFIG_HEADERS config/config.h" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "bin/Makefile") CONFIG_FILES="$CONFIG_FILES bin/Makefile" ;; "bin/audit/Makefile") CONFIG_FILES="$CONFIG_FILES bin/audit/Makefile" ;; "bin/auditd/Makefile") CONFIG_FILES="$CONFIG_FILES bin/auditd/Makefile" ;; + "bin/auditdistd/Makefile") CONFIG_FILES="$CONFIG_FILES bin/auditdistd/Makefile" ;; "bin/auditfilterd/Makefile") CONFIG_FILES="$CONFIG_FILES bin/auditfilterd/Makefile" ;; "bin/auditreduce/Makefile") CONFIG_FILES="$CONFIG_FILES bin/auditreduce/Makefile" ;; "bin/praudit/Makefile") CONFIG_FILES="$CONFIG_FILES bin/praudit/Makefile" ;; @@ -24597,9 +14667,7 @@ do "test/bsm/Makefile") CONFIG_FILES="$CONFIG_FILES test/bsm/Makefile" ;; "tools/Makefile") CONFIG_FILES="$CONFIG_FILES tools/Makefile" ;; - *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac done @@ -24622,26 +14690,24 @@ fi # after its creation but before its name has been assigned to `$tmp'. $debug || { - tmp= + tmp= ac_tmp= trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status ' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 + trap 'as_fn_exit 1' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" + test -d "$tmp" } || { tmp=./conf$$-$RANDOM (umask 077 && mkdir "$tmp") -} || -{ - $as_echo "$as_me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp # Set up the scripts for CONFIG_FILES section. # No need to generate them if there are no CONFIG_FILES. @@ -24649,7 +14715,13 @@ $debug || if test -n "$CONFIG_FILES"; then -ac_cr='
' +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then ac_cs_awk_cr='\\r' @@ -24657,7 +14729,7 @@ else ac_cs_awk_cr=$ac_cr fi -echo 'BEGIN {' >"$tmp/subs1.awk" && +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && _ACEOF @@ -24666,23 +14738,18 @@ _ACEOF echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && echo "_ACEOF" } >conf$$subs.sh || - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } -ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` ac_delim='%!_!# ' for ac_last_try in false false false false false :; do . ./conf$$subs.sh || - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` = $ac_delim_num; then + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then break elif $ac_last_try; then - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -24690,7 +14757,7 @@ done rm -f conf$$subs.sh cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && _ACEOF sed -n ' h @@ -24704,7 +14771,7 @@ s/'"$ac_delim"'$// t delim :nl h -s/\(.\{148\}\).*/\1/ +s/\(.\{148\}\)..*/\1/ t more1 s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ p @@ -24718,7 +14785,7 @@ s/.\{148\}// t nl :delim h -s/\(.\{148\}\).*/\1/ +s/\(.\{148\}\)..*/\1/ t more2 s/["\\]/\\&/g; s/^/"/; s/$/"/ p @@ -24738,7 +14805,7 @@ t delim rm -f conf$$subs.awk cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK -cat >>"\$tmp/subs1.awk" <<_ACAWK && +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && for (key in S) S_is_set[key] = 1 FS = "" @@ -24770,23 +14837,29 @@ if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" else cat -fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ - || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 -$as_echo "$as_me: error: could not setup config files machinery" >&2;} - { (exit 1); exit 1; }; } +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 _ACEOF -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and # trailing colons and then remove the whole line if VPATH becomes empty # (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// s/^[^=]*=[ ]*$// }' fi @@ -24798,7 +14871,7 @@ fi # test -n "$CONFIG_FILES" # No need to generate them if there are no CONFIG_HEADERS. # This happens for instance with `./config.status Makefile'. if test -n "$CONFIG_HEADERS"; then -cat >"$tmp/defines.awk" <<\_ACAWK || +cat >"$ac_tmp/defines.awk" <<\_ACAWK || BEGIN { _ACEOF @@ -24810,13 +14883,11 @@ _ACEOF # handling of long lines. ac_delim='%!_!# ' for ac_last_try in false false :; do - ac_t=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_t"; then + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then break elif $ac_last_try; then - { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 -$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 else ac_delim="$ac_delim!$ac_delim _$ac_delim!! " fi @@ -24882,9 +14953,9 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 } split(mac1, mac2, "(") #) macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) if (D_is_set[macro]) { # Preserve the white space surrounding the "#". - prefix = substr(line, 1, index(line, defundef) - 1) print prefix "define", macro P[macro] D[macro] next } else { @@ -24892,7 +14963,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # in the case of _POSIX_SOURCE, which is predefined and required # on some systems where configure will not decide to define it. if (defundef == "undef") { - print "/*", line, "*/" + print "/*", prefix defundef, macro, "*/" next } } @@ -24901,9 +14972,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 _ACAWK _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 -$as_echo "$as_me: error: could not setup config headers machinery" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 fi # test -n "$CONFIG_HEADERS" @@ -24916,9 +14985,7 @@ do esac case $ac_mode$ac_tag in :[FHL]*:*);; - :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -$as_echo "$as_me: error: Invalid tag $ac_tag." >&2;} - { (exit 1); exit 1; }; };; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; :[FH]-) ac_tag=-:-;; :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; esac @@ -24937,7 +15004,7 @@ $as_echo "$as_me: error: Invalid tag $ac_tag." >&2;} for ac_f do case $ac_f in - -) ac_f="$tmp/stdin";; + -) ac_f="$ac_tmp/stdin";; *) # Look for the file first in the build tree, then in the source tree # (if the path is not absolute). The absolute path cannot be DOS-style, # because $ac_f cannot contain `:'. @@ -24946,12 +15013,10 @@ $as_echo "$as_me: error: Invalid tag $ac_tag." >&2;} [\\/$]*) false;; *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; esac || - { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; esac case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - ac_file_inputs="$ac_file_inputs '$ac_f'" + as_fn_append ac_file_inputs " '$ac_f'" done # Let's still pretend it is `configure' which instantiates (i.e., don't @@ -24962,7 +15027,7 @@ $as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} `' by configure.' if test x"$ac_file" != x-; then configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 $as_echo "$as_me: creating $ac_file" >&6;} fi # Neutralize special characters interpreted by sed in replacement strings. @@ -24974,10 +15039,8 @@ $as_echo "$as_me: creating $ac_file" >&6;} esac case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } ;; + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; esac ;; esac @@ -25005,47 +15068,7 @@ $as_echo X"$ac_file" | q } s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } + as_dir="$ac_dir"; as_fn_mkdir_p ac_builddir=. case "$ac_dir" in @@ -25102,7 +15125,6 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # If the template does not know about datarootdir, expand it. # FIXME: This hack should be removed a few years after 2.60. ac_datarootdir_hack=; ac_datarootdir_seen= - ac_sed_dataroot=' /datarootdir/ { p @@ -25112,12 +15134,11 @@ ac_sed_dataroot=' /@docdir@/p /@infodir@/p /@localedir@/p -/@mandir@/p -' +/@mandir@/p' case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in *datarootdir*) ac_datarootdir_seen=yes;; *@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 $as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 @@ -25127,7 +15148,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 s&@infodir@&$infodir&g s&@localedir@&$localedir&g s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; + s&\\\${datarootdir}&$datarootdir&g' ;; esac _ACEOF @@ -25155,27 +15176,24 @@ s&@INSTALL@&$ac_INSTALL&;t t s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 $as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} +which seems to be undefined. Please make sure it is defined" >&2;} - rm -f "$tmp/stdin" + rm -f "$ac_tmp/stdin" case $ac_file in - -) cat "$tmp/out" && rm -f "$tmp/out";; - *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; esac \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; :H) # @@ -25184,27 +15202,21 @@ $as_echo "$as_me: error: could not create $ac_file" >&2;} if test x"$ac_file" != x-; then { $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" - } >"$tmp/config.h" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } - if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 $as_echo "$as_me: $ac_file is unchanged" >&6;} else rm -f "$ac_file" - mv "$tmp/config.h" "$ac_file" \ - || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 -$as_echo "$as_me: error: could not create $ac_file" >&2;} - { (exit 1); exit 1; }; } + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 fi else $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ - || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 -$as_echo "$as_me: error: could not create -" >&2;} - { (exit 1); exit 1; }; } + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 fi # Compute "$ac_file"'s index in $config_headers. _am_arg="$ac_file" @@ -25242,25 +15254,665 @@ $as_echo X"$_am_arg" | s/.*/./; q'`/stamp-h$_am_stamp_count ;; - :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 $as_echo "$as_me: executing $ac_file commands" >&6;} ;; esac case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || + "libtool":C) + + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="" + +# ### BEGIN LIBTOOL CONFIG + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that protects backslashes. +ECHO=$lt_ECHO + +# The PATH separator for the build system. +PATH_SEPARATOR=$lt_PATH_SEPARATOR + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# convert \$build file names to \$host format. +to_host_file_cmd=$lt_cv_to_host_file_cmd + +# convert \$build files to toolchain format. +to_tool_file_cmd=$lt_cv_to_tool_file_cmd + +# An object symbol dumper. +OBJDUMP=$lt_OBJDUMP + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method = "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# How to find potential files when deplibs_check_method = "file_magic". +file_magic_glob=$lt_file_magic_glob + +# Find potential files using nocaseglob when deplibs_check_method = "file_magic". +want_nocaseglob=$lt_want_nocaseglob + +# DLL creation program. +DLLTOOL=$lt_DLLTOOL + +# Command to associate shared and link libraries. +sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd + +# The archiver. +AR=$lt_AR + +# Flags to create an archive. +AR_FLAGS=$lt_AR_FLAGS + +# How to feed a file listing to the archiver. +archiver_list_spec=$lt_archiver_list_spec + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Whether to use a lock for old archive extraction. +lock_old_archive_extraction=$lock_old_archive_extraction + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# Specify filename containing input files for \$NM. +nm_file_list_spec=$lt_nm_file_list_spec + +# The root where to search for dependent libraries,and in which our libraries should be installed. +lt_sysroot=$lt_sysroot + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Manifest tool. +MANIFEST_TOOL=$lt_MANIFEST_TOOL + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Permission mode override for installation of shared libraries. +install_override_mode=$lt_install_override_mode + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Commands necessary for finishing linking programs. +postlink_cmds=$lt_postlink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + if test x"$xsi_shell" = xyes; then + sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ +func_dirname ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_basename ()$/,/^} # func_basename /c\ +func_basename ()\ +{\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ +func_dirname_and_basename ()\ +{\ +\ case ${1} in\ +\ */*) func_dirname_result="${1%/*}${2}" ;;\ +\ * ) func_dirname_result="${3}" ;;\ +\ esac\ +\ func_basename_result="${1##*/}"\ +} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ +func_stripname ()\ +{\ +\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ +\ # positional parameters, so assign one to ordinary parameter first.\ +\ func_stripname_result=${3}\ +\ func_stripname_result=${func_stripname_result#"${1}"}\ +\ func_stripname_result=${func_stripname_result%"${2}"}\ +} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ +func_split_long_opt ()\ +{\ +\ func_split_long_opt_name=${1%%=*}\ +\ func_split_long_opt_arg=${1#*=}\ +} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ +func_split_short_opt ()\ +{\ +\ func_split_short_opt_arg=${1#??}\ +\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ +} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ +func_lo2o ()\ +{\ +\ case ${1} in\ +\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ +\ *) func_lo2o_result=${1} ;;\ +\ esac\ +} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_xform ()$/,/^} # func_xform /c\ +func_xform ()\ +{\ + func_xform_result=${1%.*}.lo\ +} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_arith ()$/,/^} # func_arith /c\ +func_arith ()\ +{\ + func_arith_result=$(( $* ))\ +} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_len ()$/,/^} # func_len /c\ +func_len ()\ +{\ + func_len_result=${#1}\ +} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + +fi + +if test x"$lt_shell_append" = xyes; then + sed -e '/^func_append ()$/,/^} # func_append /c\ +func_append ()\ +{\ + eval "${1}+=\\${2}"\ +} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ +func_append_quoted ()\ +{\ +\ func_quote_for_eval "${2}"\ +\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ +} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: + + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 +$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} +fi + + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Autoconf 2.62 quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ @@ -25283,28 +15935,26 @@ $as_echo X"$mf" | q } s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ @@ -25327,66 +15977,24 @@ $as_echo X"$file" | q } s/.*/./; q'` - { as_dir=$dirpart/$fdir - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" done -done +} ;; esac done # for ac_tag -{ (exit 0); exit 0; } +as_fn_exit 0 _ACEOF -chmod +x $CONFIG_STATUS ac_clean_files=$ac_clean_files_save test $ac_write_fail = 0 || - { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 # configure is writing to config.log, and then calls config.status. @@ -25407,10 +16015,10 @@ if test "$no_create" != yes; then exec 5>>config.log # Use ||, not &&, to avoid exiting from the if with $? = 1, which # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } + $ac_cs_success || as_fn_exit 1 fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:$LINENO: WARNING: Unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: Unrecognized options: $ac_unrecognized_opts" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi diff --git a/configure.ac b/configure.ac index b6bc2708f273..c8d2d693b42d 100644 --- a/configure.ac +++ b/configure.ac @@ -2,10 +2,12 @@ # Process this file with autoconf to produce a configure script. AC_PREREQ(2.59) -AC_INIT([OpenBSM], [1.1p2], [trustedbsd-audit@TrustesdBSD.org],[openbsm]) -AC_REVISION([$P4: //depot/projects/trustedbsd/openbsm/configure.ac#54 $]) +AC_INIT([OpenBSM], [1.2alpha2], [trustedbsd-audit@TrustesdBSD.org],[openbsm]) +AC_REVISION([$P4: //depot/projects/trustedbsd/openbsm/configure.ac#63 $]) +AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_SRCDIR([bin/auditreduce/auditreduce.c]) AC_CONFIG_AUX_DIR(config) +AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_HEADER([config/config.h]) AM_MAINTAINER_MODE @@ -25,17 +27,23 @@ AC_PATH_PROGS(MIG, mig) # Checks for programs. AC_PROG_CC AC_PROG_INSTALL +AC_PROG_LEX AC_PROG_LIBTOOL +AC_PROG_YACC AM_INIT_AUTOMAKE(AC_PACKAGE_NAME, AC_PACKAGE_VERSION) AC_SEARCH_LIBS(dlsym, dl) +AC_SEARCH_LIBS(pthread_create, pthread) AC_SEARCH_LIBS(clock_gettime, rt) +AC_SEARCH_LIBS(SSL_connect, ssl) +AC_SEARCH_LIBS(humanize_number, util) +AC_SEARCH_LIBS(pidfile_open, util) # Checks for header files. AC_HEADER_STDC AC_HEADER_SYS_WAIT -AC_CHECK_HEADERS([endian.h mach/mach.h machine/endian.h sys/endian.h stdint.h]) +AC_CHECK_HEADERS([mach/mach.h stdint.h pthread_np.h printf.h]) AC_DEFINE([_GNU_SOURCE],,[Use extended API on platforms that require it]) @@ -74,6 +82,13 @@ AC_CHECK_MEMBER([struct ipc_perm._seq], #include <sys/ipc.h> ]) +AC_CHECK_MEMBER([struct sockaddr_storage.ss_len], +[AC_DEFINE(HAVE_SOCKADDR_STORAGE_SS_LEN,, Define if sockaddr_storage.ss_len field exists)], +[],[ +#include <sys/types.h> +#include <sys/socket.h> +]) + AC_HEADER_TIME AC_STRUCT_TM @@ -85,7 +100,7 @@ AC_FUNC_MKTIME AC_TYPE_SIGNAL AC_FUNC_STAT AC_FUNC_STRFTIME -AC_CHECK_FUNCS([bzero clock_gettime ftruncate gettimeofday inet_ntoa memset strchr strerror strlcat strlcpy strrchr strstr strtol strtoul pthread_mutex_lock]) +AC_CHECK_FUNCS([arc4random arc4random_buf bzero cap_enter clock_gettime closefrom faccessat fdopendir fstatat ftruncate getresgid getresuid gettimeofday inet_ntoa jail kqueue memset openat pthread_cond_timedwait_relative_np pthread_condattr_setclock pthread_mutex_lock renameat setproctitle sigtimedwait strchr strerror strlcat strlcpy strndup strrchr strstr strtol strtoul unlinkat vis]) # sys/queue.h exists on most systems, but its capabilities vary a great deal. # test for LIST_FIRST and TAILQ_FOREACH_SAFE, which appears to not exist in @@ -124,17 +139,93 @@ have_audit_syscalls=false AM_CONDITIONAL(HAVE_AUDIT_SYSCALLS, $have_audit_syscalls) # -# There are a wide variety of endian macros and functions in the wild; we try -# to use the native support if it defines be32enc(), but otherwise have to -# use our own. +# We rely on the BSD be32toh() and be32enc()-style endian macros to perform +# byte order conversions. Availability of these varies considerably -- in +# general, a system might have neither, be32toh(), or be32toh() and be32enc(). +# There is also variation in which headers are even present, and whether they +# are macros or functions. Try to organise the world into some simpler cases. +# The following macros may be set at the end: +# +# USE_ENDIAN_H +# USE_SYS_ENDIAN_H +# USE_MACHINE_ENDIAN_H +# USE_COMPAT_ENDIAN_H +# USE_COMPAT_ENDIAN_ENC_H +# +# First, decide which system endian.h to use. +# +AC_CHECK_HEADERS([endian.h], [ + have_endian_h=yes +], [ + have_endian_h=no +]) + +AC_CHECK_HEADERS([sys/endian.h], [ + have_sys_endian_h=yes +], [ + have_sys_endian_h=no +]) + +AC_CHECK_HEADERS([machine/endian.h], [ + have_machine_endian_h=yes +], [ + have_machine_endian_h=no +]) + +if test $have_endian_h = yes; then + AC_DEFINE(USE_ENDIAN_H,, Define if endian.h should be included) +elif test $have_sys_endian_h = yes; then + AC_DEFINE(USE_SYS_ENDIAN_H,, Define if sys/endian.h should be included) +elif test $have_machine_endian_h = yes; then + AC_DEFINE(USE_MACHINE_ENDIAN_H,, Define if machine/endian.h should be included) +else + AC_MSG_ERROR([no endian.h]) +fi + +# +# Next, decide if we need to supplement with compat headers. # AC_TRY_LINK([ + #ifdef USE_ENDIAN_H + #include <endian.h> + #endif + #ifdef USE_SYS_ENDIAN_H #include <sys/endian.h> - #include <stdlib.h> + #endif + #ifdef USE_MACHINE_ENDIAN_H + #include <machine/endian.h> + #endif ], [ - be32enc(NULL, 1); + (void)be32toh(0); +], [], [ + AC_DEFINE(USE_COMPAT_ENDIAN_H,, Define if compat/endian.h is required) + AC_MSG_RESULT([using compat/endian.h]) +]) + +AC_TRY_LINK([ + #ifdef USE_ENDIAN_H + #include <endian.h> + #endif + #ifdef USE_SYS_ENDIAN_H + #include <sys/endian.h> + #endif + #ifdef USE_MACHINE_ENDIAN_H + #include <machine/endian.h> + #endif + #ifdef USE_COMPAT_ENDIAN_H + #include "compat/endian.h" + #endif + #include <stdlib.h> ], [ -AC_DEFINE(HAVE_BE32ENC,, Define if be32enc is present) + bswap16(0); + bswap32(0); + bswap64(0); + be32enc(NULL, 0); + htole64(0); + le64toh(0); +], [], [ + AC_DEFINE(USE_COMPAT_ENDIAN_ENC_H,, Define if compat/endian_enc.h is required) + AC_MSG_RESULT([using compat/endian_enc.h]) ]) # Check to see if Mach IPC is used for trigger messages. If so, use Mach IPC @@ -151,6 +242,7 @@ AC_CONFIG_FILES([Makefile bin/Makefile bin/audit/Makefile bin/auditd/Makefile + bin/auditdistd/Makefile bin/auditfilterd/Makefile bin/auditreduce/Makefile bin/praudit/Makefile diff --git a/etc/audit_control b/etc/audit_control index 26f13cbe1873..1566628597ab 100644 --- a/etc/audit_control +++ b/etc/audit_control @@ -1,7 +1,8 @@ # -# $P4: //depot/projects/trustedbsd/openbsm/etc/audit_control#8 $ +# $P4: //depot/projects/trustedbsd/openbsm/etc/audit_control#9 $ # dir:/var/audit +dist:off flags:lo,aa minfree:5 naflags:lo,aa diff --git a/etc/audit_event b/etc/audit_event index 45b0db5a2942..519183db24e9 100644 --- a/etc/audit_event +++ b/etc/audit_event @@ -1,5 +1,5 @@ # -# $P4: //depot/projects/trustedbsd/openbsm/etc/audit_event#41 $ +# $P4: //depot/projects/trustedbsd/openbsm/etc/audit_event#42 $ # # The mapping between event identifiers and values is also hard-coded in # audit_kevents.h and audit_uevents.h, so changes must occur in both places, @@ -557,6 +557,10 @@ 43194:AUE_FSCTL:fsctl():fm 43195:AUE_FFSCTL:ffsctl():fm 43196:AUE_LPATHCONF:lpathconf(2):fa +43197:AUE_PDFORK:pdfork(2):pc +43198:AUE_PDKILL:pdkill(2):pc +43199:AUE_PDGETPID:pdgetpid(2):pc +43200:AUE_PDWAIT:pdwait(2):pc # # Solaris userspace events. # diff --git a/libauditd/Makefile.am b/libauditd/Makefile.am index 2459cdfcd2c4..3a4e7abdc7b0 100644 --- a/libauditd/Makefile.am +++ b/libauditd/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/libauditd/Makefile.am#2 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/libauditd/Makefile.am#3 $ +## if USE_NATIVE_INCLUDES INCLUDES = -I$(top_builddir) -I$(top_srcdir) diff --git a/libauditd/Makefile.in b/libauditd/Makefile.in index fab69cc91254..96e05f353ea1 100644 --- a/libauditd/Makefile.in +++ b/libauditd/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/libauditd/Makefile.in#3 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -37,7 +51,8 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = libauditd -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -45,14 +60,35 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(man3dir)" -libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) libauditd_la_LIBADD = am_libauditd_la_OBJECTS = auditd_lib.lo @@ -60,6 +96,7 @@ libauditd_la_OBJECTS = $(am_libauditd_la_OBJECTS) DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ @@ -71,6 +108,11 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libauditd_la_SOURCES) DIST_SOURCES = $(libauditd_la_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac man3dir = $(mandir)/man3 NROFF = nroff MANS = $(man3_MANS) @@ -89,45 +131,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -136,13 +185,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -205,14 +256,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libauditd/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign libauditd/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libauditd/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign libauditd/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -230,34 +281,42 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) - test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ if test -f $$p; then \ - f=$(am__strip_dir) \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ + list2="$$list2 $$p"; \ else :; fi; \ - done + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p=$(am__strip_dir) \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test "$$dir" != "$$p" || dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libauditd.la: $(libauditd_la_OBJECTS) $(libauditd_la_DEPENDENCIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } +libauditd.la: $(libauditd_la_OBJECTS) $(libauditd_la_DEPENDENCIES) $(EXTRA_libauditd_la_DEPENDENCIES) $(LINK) -rpath $(libdir) $(libauditd_la_OBJECTS) $(libauditd_la_LIBADD) $(LIBS) mostlyclean-compile: @@ -270,21 +329,21 @@ distclean-compile: .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< @@ -294,65 +353,61 @@ mostlyclean-libtool: clean-libtool: -rm -rf .libs _libs -install-man3: $(man3_MANS) $(man_MANS) +install-man3: $(man3_MANS) @$(NORMAL_INSTALL) - test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)" - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.3*) list="$$list $$i" ;; \ - esac; \ + @list1='$(man3_MANS)'; \ + list2=''; \ + test -n "$(man3dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.3[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 3*) ;; \ - *) ext='3' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst"; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ + done; } + uninstall-man3: @$(NORMAL_UNINSTALL) - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.3*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 3*) ;; \ - *) ext='3' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man3dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man3dir)/$$inst"; \ - done + @list='$(man3_MANS)'; test -n "$(man3dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir) ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -360,34 +415,66 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically 'make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -403,13 +490,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -430,16 +521,22 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -461,6 +558,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -469,18 +568,28 @@ install-data-am: install-man install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-libLTLIBRARIES install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-man3 install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -508,7 +617,7 @@ uninstall-man: uninstall-man3 .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libLTLIBRARIES clean-libtool ctags distclean \ + clean-libLTLIBRARIES clean-libtool cscopelist ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ @@ -522,6 +631,7 @@ uninstall-man: uninstall-man3 tags uninstall uninstall-am uninstall-libLTLIBRARIES \ uninstall-man uninstall-man3 + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/libauditd/auditd_lib.c b/libauditd/auditd_lib.c index bf57155cd8ef..3c033487fafd 100644 --- a/libauditd/auditd_lib.c +++ b/libauditd/auditd_lib.c @@ -26,7 +26,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/libauditd/auditd_lib.c#11 $ + * $P4: //depot/projects/trustedbsd/openbsm/libauditd/auditd_lib.c#18 $ */ #include <sys/param.h> @@ -52,6 +52,7 @@ #include <bsm/auditd_lib.h> #include <bsm/libbsm.h> +#include <assert.h> #include <dirent.h> #include <err.h> #include <errno.h> @@ -66,7 +67,7 @@ #ifdef __APPLE__ #include <notify.h> #ifndef __BSM_INTERNAL_NOTIFY_KEY -#define __BSM_INTERNAL_NOTIFY_KEY "com.apple.audit.change" +#define __BSM_INTERNAL_NOTIFY_KEY "com.apple.audit.change" #endif /* __BSM_INTERNAL_NOTIFY_KEY */ #endif /* __APPLE__ */ @@ -101,37 +102,38 @@ struct audit_trail { }; static int auditd_minval = -1; +static int auditd_dist = 0; static char auditd_host[MAXHOSTNAMELEN]; static int auditd_hostlen = -1; static char *auditd_errmsg[] = { - "no error", /* ADE_NOERR ( 0) */ - "could not parse audit_control(5) file", /* ADE_PARSE ( 1) */ - "auditon(2) failed", /* ADE_AUDITON ( 2) */ - "malloc(3) failed", /* ADE_NOMEM ( 3) */ - "all audit log directories over soft limit", /* ADE_SOFTLIM ( 4) */ - "all audit log directories over hard limit", /* ADE_HARDLIM ( 5) */ - "could not create file name string", /* ADE_STRERR ( 6) */ - "could not open audit record", /* ADE_AU_OPEN ( 7) */ - "could not close audit record", /* ADE_AU_CLOSE ( 8) */ - "could not set active audit session state", /* ADE_SETAUDIT ( 9) */ - "auditctl(2) failed (trail still swapped)", /* ADE_ACTL (10) */ - "auditctl(2) failed (trail not swapped)", /* ADE_ACTLERR (11) */ - "could not swap audit trail file", /* ADE_SWAPERR (12) */ + "no error", /* ADE_NOERR ( 0) */ + "could not parse audit_control(5) file", /* ADE_PARSE ( 1) */ + "auditon(2) failed", /* ADE_AUDITON ( 2) */ + "malloc(3) failed", /* ADE_NOMEM ( 3) */ + "all audit log directories over soft limit", /* ADE_SOFTLIM ( 4) */ + "all audit log directories over hard limit", /* ADE_HARDLIM ( 5) */ + "could not create file name string", /* ADE_STRERR ( 6) */ + "could not open audit record", /* ADE_AU_OPEN ( 7) */ + "could not close audit record", /* ADE_AU_CLOSE ( 8) */ + "could not set active audit session state", /* ADE_SETAUDIT ( 9) */ + "auditctl(2) failed (trail still swapped)", /* ADE_ACTL (10) */ + "auditctl(2) failed (trail not swapped)", /* ADE_ACTLERR (11) */ + "could not swap audit trail file", /* ADE_SWAPERR (12) */ "could not rename crash recovery file", /* ADE_RENAME (13) */ "could not read 'current' link file", /* ADE_READLINK (14) */ - "could not create 'current' link file", /* ADE_SYMLINK (15) */ + "could not create 'current' link file", /* ADE_SYMLINK (15) */ "invalid argument", /* ADE_INVAL (16) */ "could not resolve hostname to address", /* ADE_GETADDR (17) */ "address family not supported", /* ADE_ADDRFAM (18) */ "error expiring audit trail files", /* ADE_EXPIRE (19) */ }; -#define MAXERRCODE (sizeof(auditd_errmsg) / sizeof(auditd_errmsg[0])) +#define MAXERRCODE (sizeof(auditd_errmsg) / sizeof(auditd_errmsg[0])) -#define NA_EVENT_STR_SIZE 128 -#define POL_STR_SIZE 128 +#define NA_EVENT_STR_SIZE 128 +#define POL_STR_SIZE 128 /* @@ -144,19 +146,19 @@ auditd_strerror(int errcode) if (idx < 0 || idx > (int)MAXERRCODE) return ("Invalid auditd error code"); - + return (auditd_errmsg[idx]); } /* - * Free our local list of directory names and init list + * Free our local list of directory names and init list. */ static void free_dir_q(void) { struct dir_ent *d1, *d2; - + d1 = TAILQ_FIRST(&dir_q); while (d1 != NULL) { d2 = TAILQ_NEXT(d1, dirs); @@ -179,9 +181,9 @@ affixdir(char *name, struct dir_ent *dirent) /* * Sanity check on file name. */ - if (strlen(name) != (FILENAME_LEN - 1)) { + if (strlen(name) != FILENAME_LEN) { errno = EINVAL; - return (NULL); + return (NULL); } /* @@ -203,11 +205,11 @@ static void insert_orderly(struct dir_ent *denew) { struct dir_ent *dep; - + TAILQ_FOREACH(dep, &dir_q, dirs) { if (dep->softlim == 1 && denew->softlim == 0) { TAILQ_INSERT_BEFORE(dep, denew, dirs); - return; + return; } if (dep->hardlim == 1 && denew->hardlim == 0) { TAILQ_INSERT_BEFORE(dep, denew, dirs); @@ -218,13 +220,33 @@ insert_orderly(struct dir_ent *denew) } /* + * Get the min percentage of free blocks from audit_control(5) and that + * value in the kernel. Return: + * ADE_NOERR on success, + * ADE_PARSE error parsing audit_control(5), + */ +int +auditd_set_dist(void) +{ + int ret; + + ret = getacdist(); + if (ret < 0) + return (ADE_PARSE); + + auditd_dist = ret; + + return (ADE_NOERR); +} + +/* * Get the host from audit_control(5) and set it in the audit kernel * information. Return: * ADE_NOERR on success. * ADE_PARSE error parsing audit_control(5). * ADE_AUDITON error getting/setting auditon(2) value. - * ADE_GETADDR error getting address info for host. - * ADE_ADDRFAM un-supported address family. + * ADE_GETADDR error getting address info for host. + * ADE_ADDRFAM un-supported address family. */ int auditd_set_host(void) @@ -236,8 +258,8 @@ auditd_set_host(void) int error, ret = ADE_NOERR; if (getachost(auditd_host, sizeof(auditd_host)) != 0) { - ret = ADE_PARSE; - + ret = ADE_PARSE; + /* * To maintain reverse compatability with older audit_control * files, simply drop a warning if the host parameter has not @@ -283,11 +305,11 @@ auditd_set_host(void) return (ret); } -/* +/* * Get the min percentage of free blocks from audit_control(5) and that * value in the kernel. Return: * ADE_NOERR on success, - * ADE_PARSE error parsing audit_control(5), + * ADE_PARSE error parsing audit_control(5), * ADE_AUDITON error getting/setting auditon(2) value. */ int @@ -297,7 +319,7 @@ auditd_set_minfree(void) if (getacmin(&auditd_minval) != 0) return (ADE_PARSE); - + if (audit_get_qctrl(&qctrl, sizeof(qctrl)) != 0) return (ADE_AUDITON); @@ -318,7 +340,7 @@ static int trailname_to_tstamp(char *fn, time_t *tstamp) { struct tm tm; - char ts[TIMESTAMP_LEN]; + char ts[TIMESTAMP_LEN + 1]; char *p; *tstamp = 0; @@ -328,7 +350,7 @@ trailname_to_tstamp(char *fn, time_t *tstamp) */ if ((p = strchr(fn, '.')) == NULL) return (1); - strlcpy(ts, ++p, TIMESTAMP_LEN); + strlcpy(ts, ++p, sizeof(ts)); if (strlen(ts) != POSTFIX_LEN) return (1); @@ -340,7 +362,7 @@ trailname_to_tstamp(char *fn, time_t *tstamp) if (tm.tm_sec < 0 || tm.tm_sec > 60) return (1); - /* minutes (0-59) */ + /* minutes (0-59) */ *p = '\0'; p -= 2; tm.tm_min = atol(p); if (tm.tm_min < 0 || tm.tm_min > 59) @@ -377,10 +399,10 @@ trailname_to_tstamp(char *fn, time_t *tstamp) /* * Remove audit trails files according to the expiration conditions. Returns: - * ADE_NOERR on success or there is nothing to do. - * ADE_PARSE if error parsing audit_control(5). - * ADE_NOMEM if could not allocate memory. - * ADE_EXPIRE if there was an unespected error. + * ADE_NOERR on success or there is nothing to do. + * ADE_PARSE if error parsing audit_control(5). + * ADE_NOMEM if could not allocate memory. + * ADE_EXPIRE if there was an unespected error. */ int auditd_expire_trails(int (*warn_expired)(char *)) @@ -410,7 +432,7 @@ auditd_expire_trails(int (*warn_expired)(char *)) */ activefn[0] = '\0'; readlink(AUDIT_CURRENT_LINK, activefn, MAXPATHLEN - 1); - if ((afnp = strrchr(activefn, '/')) != NULL) + if ((afnp = strrchr(activefn, '/')) != NULL) afnp++; @@ -429,15 +451,12 @@ auditd_expire_trails(int (*warn_expired)(char *)) /* * Quickly filter non-trail files. */ - if (dp->d_namlen != (FILENAME_LEN - 1) || -#ifdef DT_REG - dp->d_type != DT_REG || -#endif + if (dp->d_namlen < FILENAME_LEN || dp->d_name[POSTFIX_LEN] != '.') continue; if (asprintf(&pn, "%s/%s", traildir->dirname, - dp->d_name) < 0) { + dp->d_name) < 0) { ret = ADE_NOMEM; break; } @@ -453,8 +472,7 @@ auditd_expire_trails(int (*warn_expired)(char *)) * If this is the 'current' audit trail then * don't add it to the tail queue. */ - if (NULL != afnp && - strncmp(dp->d_name, afnp, FILENAME_LEN) == 0) { + if (NULL != afnp && strcmp(dp->d_name, afnp) == 0) { free(pn); continue; } @@ -481,9 +499,9 @@ auditd_expire_trails(int (*warn_expired)(char *)) struct timeval tv[2]; tstamp = stbuf.st_mtime = current_time; - TIMESPEC_TO_TIMEVAL(&tv[0], + TIMESPEC_TO_TIMEVAL(&tv[0], &stbuf.st_atimespec); - TIMESPEC_TO_TIMEVAL(&tv[1], + TIMESPEC_TO_TIMEVAL(&tv[1], &stbuf.st_mtimespec); utimes(pn, tv); } @@ -507,7 +525,7 @@ auditd_expire_trails(int (*warn_expired)(char *)) * insertion sort. */ if (TAILQ_EMPTY(&head) || - (new->at_time <= TAILQ_FIRST(&head)->at_time)) { + new->at_time <= TAILQ_FIRST(&head)->at_time) { TAILQ_INSERT_HEAD(&head, new, at_trls); continue; } @@ -520,11 +538,12 @@ auditd_expire_trails(int (*warn_expired)(char *)) } } + closedir(dirp); } oldest_time = current_time - expire_age; - /* + /* * Expire trail files, oldest (mtime) first, if the given * conditions are met. */ @@ -536,7 +555,7 @@ auditd_expire_trails(int (*warn_expired)(char *)) if ((expire_size && total_size > expire_size) && (expire_age && at->at_time < oldest_time)) { if (warn_expired) - (*warn_expired)(at->at_path); + (*warn_expired)(at->at_path); if (unlink(at->at_path) < 0) ret = ADE_EXPIRE; total_size -= at->at_size; @@ -545,7 +564,7 @@ auditd_expire_trails(int (*warn_expired)(char *)) if ((expire_size && total_size > expire_size) || (expire_age && at->at_time < oldest_time)) { if (warn_expired) - (*warn_expired)(at->at_path); + (*warn_expired)(at->at_path); if (unlink(at->at_path) < 0) ret = ADE_EXPIRE; total_size -= at->at_size; @@ -589,9 +608,9 @@ auditd_read_dirs(int (*warn_soft)(char *), int (*warn_hard)(char *)) if (auditd_hostlen == -1) auditd_set_host(); - /* - * Init directory q. Force a re-read of the file the next time. - */ + /* + * Init directory q. Force a re-read of the file the next time. + */ free_dir_q(); endac(); @@ -600,17 +619,17 @@ auditd_read_dirs(int (*warn_soft)(char *), int (*warn_hard)(char *)) * admin's preference, then those over soft limit and, finally, * those over the hard limit. * - * XXX We should use the reentrant interfaces once they are - * available. - */ + * XXX We should use the reentrant interfaces once they are + * available. + */ while (getacdir(cur_dir, MAXNAMLEN) >= 0) { if (statfs(cur_dir, &sfs) < 0) continue; /* XXX should warn */ - soft = (sfs.f_bfree < (sfs.f_blocks / (100 / auditd_minval))) ? + soft = (sfs.f_bfree < (sfs.f_blocks * auditd_minval / 100 )) ? 1 : 0; hard = (sfs.f_bfree < AUDIT_HARD_LIMIT_FREE_BLOCKS) ? 1 : 0; if (soft) { - if (warn_soft) + if (warn_soft) (*warn_soft)(cur_dir); scnt++; } @@ -623,7 +642,7 @@ auditd_read_dirs(int (*warn_soft)(char *), int (*warn_hard)(char *)) if (dirent == NULL) return (ADE_NOMEM); dirent->softlim = soft; - dirent->hardlim = hard; + dirent->hardlim = hard; dirent->dirname = (char *) malloc(MAXNAMLEN); if (dirent->dirname == NULL) { free(dirent); @@ -653,8 +672,8 @@ auditd_close_dirs(void) /* * Process the audit event file, obtaining a class mapping for each event, and * set that mapping into the kernel. Return: - * n number of event mappings that were successfully processed, - * ADE_NOMEM if there was an error allocating memory. + * n number of event mappings that were successfully processed, + * ADE_NOMEM if there was an error allocating memory. */ int auditd_set_evcmap(void) @@ -663,7 +682,6 @@ auditd_set_evcmap(void) au_evclass_map_t evc_map; int ctr = 0; - /* * XXX There's a risk here that the BSM library will return NULL * for an event when it can't properly map it to a class. In that @@ -672,12 +690,12 @@ auditd_set_evcmap(void) */ ev.ae_name = (char *)malloc(AU_EVENT_NAME_MAX); ev.ae_desc = (char *)malloc(AU_EVENT_DESC_MAX); - if ((ev.ae_name == NULL) || (ev.ae_desc == NULL)) { + if (ev.ae_name == NULL || ev.ae_desc == NULL) { if (ev.ae_name != NULL) free(ev.ae_name); return (ADE_NOMEM); } - + /* * XXXRW: Currently we have no way to remove mappings from the kernel * when they are removed from the file-based mappings. @@ -699,7 +717,7 @@ auditd_set_evcmap(void) /* * Get the non-attributable event string and set the kernel mask. Return: - * ADE_NOERR on success, + * ADE_NOERR on success, * ADE_PARSE error parsing audit_control(5), * ADE_AUDITON error setting the mask using auditon(2). */ @@ -708,9 +726,9 @@ auditd_set_namask(void) { au_mask_t aumask; char naeventstr[NA_EVENT_STR_SIZE]; - - if ((getacna(naeventstr, NA_EVENT_STR_SIZE) != 0) || - (getauditflagsbin(naeventstr, &aumask) != 0)) + + if (getacna(naeventstr, NA_EVENT_STR_SIZE) != 0 || + getauditflagsbin(naeventstr, &aumask) != 0) return (ADE_PARSE); if (audit_set_kmask(&aumask, sizeof(aumask)) != 0) @@ -724,7 +742,7 @@ auditd_set_namask(void) * implement the policy. However, if one isn't defined or if there is an error * parsing the control file, set AUDIT_CNT to avoid leaving the system in a * fragile state. Return: - * ADE_NOERR on success, + * ADE_NOERR on success, * ADE_PARSE error parsing audit_control(5), * ADE_AUDITON error setting policy using auditon(2). */ @@ -734,13 +752,13 @@ auditd_set_policy(void) int policy; char polstr[POL_STR_SIZE]; - if ((getacpol(polstr, POL_STR_SIZE) != 0) || - (au_strtopol(polstr, &policy) != 0)) { + if (getacpol(polstr, POL_STR_SIZE) != 0 || + au_strtopol(polstr, &policy) != 0) { policy = AUDIT_CNT; if (audit_set_policy(&policy) != 0) return (ADE_AUDITON); return (ADE_PARSE); - } + } if (audit_set_policy(&policy) != 0) return (ADE_AUDITON); @@ -748,9 +766,9 @@ auditd_set_policy(void) return (ADE_NOERR); } -/* +/* * Set trail rotation size. Return: - * ADE_NOERR on success, + * ADE_NOERR on success, * ADE_PARSE error parsing audit_control(5), * ADE_AUDITON error setting file size using auditon(2). */ @@ -771,101 +789,137 @@ auditd_set_fsize(void) if (audit_set_fsize(&au_fstat, sizeof(au_fstat)) != 0) return (ADE_AUDITON); - return (ADE_NOERR); + return (ADE_NOERR); +} + +static void +inject_dist(const char *fromname, char *toname, size_t tonamesize) +{ + char *ptr; + + ptr = strrchr(fromname, '/'); + assert(ptr != NULL); + assert(ptr - fromname < (ssize_t)tonamesize); + strlcpy(toname, fromname, ptr - fromname + 1); + strlcat(toname, "/dist/", tonamesize); + strlcat(toname, ptr + 1, tonamesize); +} + +static int +auditdist_link(const char *filename) +{ + char fname[MAXPATHLEN]; + + if (auditd_dist) { + inject_dist(filename, fname, sizeof(fname)); + /* Ignore errors. */ + (void) link(filename, fname); + } + + return (0); +} + +int +auditd_rename(const char *fromname, const char *toname) +{ + char fname[MAXPATHLEN], tname[MAXPATHLEN]; + + if (auditd_dist) { + inject_dist(fromname, fname, sizeof(fname)); + inject_dist(toname, tname, sizeof(tname)); + /* Ignore errors. */ + (void) rename(fname, tname); + } + + return (rename(fromname, toname)); } /* - * Create the new audit file with appropriate permissions and ownership. Try - * to clean up if something goes wrong. + * Create the new audit file with appropriate permissions and ownership. + * Call auditctl(2) for this file. + * Try to clean up if something goes wrong. + * *errorp is modified only on auditctl(2) failure. */ static int -open_trail(char *fname, gid_t gid) +open_trail(char *fname, gid_t gid, int *errorp) { - int error, fd; - - fd = open(fname, O_RDONLY | O_CREAT, S_IRUSR | S_IRGRP); + int fd; + + /* XXXPJD: What should we do if the file already exists? */ + fd = open(fname, O_RDONLY | O_CREAT, S_IRUSR); if (fd < 0) return (-1); - if (fchown(fd, -1, gid) < 0) { - error = errno; - close(fd); - (void)unlink(fname); - errno = error; + if (fchown(fd, -1, gid) < 0 || fchmod(fd, S_IRUSR | S_IRGRP) < 0) { + (void) close(fd); + (void) unlink(fname); return (-1); } - return (fd); + (void) close(fd); + if (auditctl(fname) < 0) { + *errorp = errno; + (void) unlink(fname); + return (-1); + } + (void) auditdist_link(fname); + return (0); } /* * Create the new audit trail file, swap with existing audit file. Arguments * include timestamp for the filename, a pointer to a string for returning the - * new file name, GID for trail file, and audit_warn function pointer for + * new file name, GID for trail file, and audit_warn function pointer for * 'getacdir()' errors. Returns: - * ADE_NOERR on success, - * ADE_STRERR if the file name string could not be created, - * ADE_SWAPERR if the audit trail file could not be swapped, - * ADE_ACTL if the auditctl(2) call failed but file swap still + * ADE_NOERR on success, + * ADE_STRERR if the file name string could not be created, + * ADE_SWAPERR if the audit trail file could not be swapped, + * ADE_ACTL if the auditctl(2) call failed but file swap still * successful. * ADE_ACTLERR if the auditctl(2) call failed and file swap failed. * ADE_SYMLINK if symlink(2) failed updating the current link. */ int -auditd_swap_trail(char *TS, char **newfile, gid_t gid, +auditd_swap_trail(char *TS, char **newfile, gid_t gid, int (*warn_getacdir)(char *)) { - char timestr[FILENAME_LEN]; + char timestr[FILENAME_LEN + 1]; char *fn; struct dir_ent *dirent; - int fd; - int error; int saverrno = 0; - - if (strlen(TS) != (TIMESTAMP_LEN - 1) || - snprintf(timestr, FILENAME_LEN, "%s.%s", TS, NOT_TERMINATED) < 0) { + + if (strlen(TS) != TIMESTAMP_LEN || + snprintf(timestr, sizeof(timestr), "%s.%s", TS, + NOT_TERMINATED) < 0) { errno = EINVAL; return (ADE_STRERR); } - + /* Try until we succeed. */ TAILQ_FOREACH(dirent, &dir_q, dirs) { - if (dirent->hardlim) + if (dirent->hardlim) continue; if ((fn = affixdir(timestr, dirent)) == NULL) return (ADE_STRERR); /* - * Create and open the file; then close and pass to the - * kernel if all went well. + * Create the file and pass to the kernel if all went well. */ - fd = open_trail(fn, gid); - if (fd >= 0) { - error = auditctl(fn); - if (error) { - /* - * auditctl failed setting log file. - * Try again. + if (open_trail(fn, gid, &saverrno) == 0) { + /* Success. */ + *newfile = fn; + if (saverrno) { + /* + * auditctl() failed but still + * successful. Return errno and "soft" + * error. */ - saverrno = errno; - close(fd); - } else { - /* Success. */ - *newfile = fn; - close(fd); - if (error) - return (error); - if (saverrno) { - /* - * auditctl() failed but still - * successful. Return errno and "soft" - * error. - */ - errno = saverrno; - return (ADE_ACTL); - } - return (ADE_NOERR); - } - } - + errno = saverrno; + return (ADE_ACTL); + } + return (ADE_NOERR); + } + /* + * auditctl failed setting log file. Try again. + */ /* * Tell the administrator about lack of permissions for dir. */ @@ -890,11 +944,11 @@ auditd_prevent_audit(void) { auditinfo_addr_t aia; - /* + /* * To prevent event feedback cycles and avoid audit becoming stalled if * auditing is suspended we mask this processes events from being * audited. We allow the uid, tid, and mask fields to be implicitly - * set to zero, but do set the audit session ID to the PID. + * set to zero, but do set the audit session ID to the PID. * * XXXRW: Is there more to it than this? */ @@ -902,7 +956,7 @@ auditd_prevent_audit(void) aia.ai_asid = AU_ASSIGN_ASID; aia.ai_termid.at_type = AU_IPv4; if (setaudit_addr(&aia, sizeof(aia)) != 0) - return (ADE_SETAUDIT); + return (ADE_SETAUDIT); return (ADE_NOERR); } #else @@ -911,21 +965,21 @@ auditd_prevent_audit(void) { auditinfo_t ai; - /* + /* * To prevent event feedback cycles and avoid audit becoming stalled if * auditing is suspended we mask this processes events from being * audited. We allow the uid, tid, and mask fields to be implicitly - * set to zero, but do set the audit session ID to the PID. + * set to zero, but do set the audit session ID to the PID. * * XXXRW: Is there more to it than this? */ bzero(&ai, sizeof(ai)); ai.ai_asid = getpid(); if (setaudit(&ai) != 0) - return (ADE_SETAUDIT); + return (ADE_SETAUDIT); return (ADE_NOERR); } -#endif /* __APPLE__ */ +#endif /* !__APPLE__ */ /* * Generate and submit audit record for audit startup or shutdown. The event @@ -934,7 +988,7 @@ auditd_prevent_audit(void) * Returns: * AUE_NOERR on success, * ADE_NOMEM if memory allocation fails, - * ADE_AU_OPEN if au_open(3) fails, + * ADE_AU_OPEN if au_open(3) fails, * ADE_AU_CLOSE if au_close(3) fails. */ int @@ -953,7 +1007,7 @@ auditd_gen_record(int event, char *path) asprintf(&autext, "%s::Audit shutdown", getprogname()); else if (event == AUE_audit_recovery) asprintf(&autext, "%s::Audit recovery", getprogname()); - else + else return (ADE_INVAL); if (autext == NULL) return (ADE_NOMEM); @@ -965,7 +1019,7 @@ auditd_gen_record(int event, char *path) bzero(&aia, sizeof(aia)); uid = getuid(); pid = getpid(); if ((tok = au_to_subject32_ex(uid, geteuid(), getegid(), uid, getgid(), - pid, pid, &aia.ai_termid)) != NULL) + pid, pid, &aia.ai_termid)) != NULL) au_write(aufd, tok); if ((tok = au_to_text(autext)) != NULL) au_write(aufd, tok); @@ -985,8 +1039,8 @@ auditd_gen_record(int event, char *path) * 'current' symlink. The argument 'curfile' is the file the 'current' symlink * should point to. Returns: * ADE_NOERR on success, - * ADE_AU_OPEN if au_open(3) fails, - * ADE_AU_CLOSE if au_close(3) fails. + * ADE_AU_OPEN if au_open(3) fails, + * ADE_AU_CLOSE if au_close(3) fails. * ADE_RENAME if error renaming audit trail file, * ADE_READLINK if error reading the 'current' link, * ADE_SYMLINK if error creating 'current' link. @@ -1005,17 +1059,18 @@ auditd_new_curlink(char *curfile) * Check to see if audit was shutdown properly. If not, clean up, * recover previous audit trail file, and generate audit record. */ - len = readlink(AUDIT_CURRENT_LINK, recoveredname, MAXPATHLEN - 1); + len = readlink(AUDIT_CURRENT_LINK, recoveredname, + sizeof(recoveredname) - 1); if (len > 0) { /* 'current' exist but is it pointing at a valid file? */ recoveredname[len++] = '\0'; - if (stat(recoveredname, &sb) == 0) { + if (stat(recoveredname, &sb) == 0) { /* Yes, rename it to a crash recovery file. */ - strlcpy(newname, recoveredname, MAXPATHLEN); + strlcpy(newname, recoveredname, sizeof(newname)); if ((ptr = strstr(newname, NOT_TERMINATED)) != NULL) { memcpy(ptr, CRASH_RECOVERY, POSTFIX_LEN); - if (rename(recoveredname, newname) != 0) + if (auditd_rename(recoveredname, newname) != 0) return (ADE_RENAME); } else return (ADE_STRERR); @@ -1053,10 +1108,10 @@ audit_quick_start(void) int err; char *newfile = NULL; time_t tt; - char TS[TIMESTAMP_LEN]; + char TS[TIMESTAMP_LEN + 1]; int ret = 0; - /* + /* * Mask auditing of this process. */ if (auditd_prevent_audit() != 0) @@ -1065,14 +1120,19 @@ audit_quick_start(void) /* * Read audit_control and get log directories. */ - err = auditd_read_dirs(NULL, NULL); + err = auditd_read_dirs(NULL, NULL); if (err != ADE_NOERR && err != ADE_SOFTLIM) return (-1); /* + * Setup trail file distribution. + */ + (void) auditd_set_dist(); + + /* * Create a new audit trail log. */ - if (getTSstr(tt, TS, TIMESTAMP_LEN) != 0) + if (getTSstr(tt, TS, sizeof(TS)) != 0) return (-1); err = auditd_swap_trail(TS, &newfile, getgid(), NULL); if (err != ADE_NOERR && err != ADE_ACTL) { @@ -1081,7 +1141,7 @@ audit_quick_start(void) } /* - * Add the current symlink and recover from crash, if needed. + * Add the current symlink and recover from crash, if needed. */ if (auditd_new_curlink(newfile) != 0) { ret = -1; @@ -1128,7 +1188,7 @@ audit_quick_stop(void) time_t tt; char oldname[MAXPATHLEN]; char newname[MAXPATHLEN]; - char TS[TIMESTAMP_LEN]; + char TS[TIMESTAMP_LEN + 1]; /* * Auditing already disabled? @@ -1156,23 +1216,23 @@ audit_quick_stop(void) /* * Rename last audit trail and remove 'current' link. */ - len = readlink(AUDIT_CURRENT_LINK, oldname, MAXPATHLEN - 1); + len = readlink(AUDIT_CURRENT_LINK, oldname, sizeof(oldname) - 1); if (len < 0) return (-1); oldname[len++] = '\0'; - if (getTSstr(tt, TS, TIMESTAMP_LEN) != 0) + if (getTSstr(tt, TS, sizeof(TS)) != 0) return (-1); - strlcpy(newname, oldname, len); + strlcpy(newname, oldname, sizeof(newname)); if ((ptr = strstr(newname, NOT_TERMINATED)) != NULL) { memcpy(ptr, TS, POSTFIX_LEN); - if (rename(oldname, newname) != 0) + if (auditd_rename(oldname, newname) != 0) return (-1); } else return (-1); - + (void) unlink(AUDIT_CURRENT_LINK); return (0); diff --git a/libbsm/Makefile.am b/libbsm/Makefile.am index 2400a59ec4c9..bfad93b5a735 100644 --- a/libbsm/Makefile.am +++ b/libbsm/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/libbsm/Makefile.am#9 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/libbsm/Makefile.am#10 $ +## if USE_NATIVE_INCLUDES INCLUDES = -I$(top_builddir) -I$(top_srcdir) diff --git a/libbsm/Makefile.in b/libbsm/Makefile.in index e395f0fd40cd..956d66f7787d 100644 --- a/libbsm/Makefile.in +++ b/libbsm/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/libbsm/Makefile.in#15 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -41,7 +55,8 @@ host_triplet = @host@ @HAVE_AUDIT_SYSCALLS_TRUE@ bsm_wrappers.c subdir = libbsm -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -49,14 +64,35 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(man3dir)" -libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) libbsm_la_LIBADD = am__libbsm_la_SOURCES_DIST = bsm_audit.c bsm_class.c bsm_control.c \ @@ -73,6 +109,7 @@ libbsm_la_OBJECTS = $(am_libbsm_la_OBJECTS) DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ @@ -84,6 +121,11 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(libbsm_la_SOURCES) DIST_SOURCES = $(am__libbsm_la_SOURCES_DIST) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac man3dir = $(mandir)/man3 NROFF = nroff MANS = $(man3_MANS) @@ -102,45 +144,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -149,13 +198,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -232,14 +283,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libbsm/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign libbsm/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libbsm/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign libbsm/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -257,34 +308,42 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) - test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ if test -f $$p; then \ - f=$(am__strip_dir) \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ + list2="$$list2 $$p"; \ else :; fi; \ - done + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p=$(am__strip_dir) \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test "$$dir" != "$$p" || dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libbsm.la: $(libbsm_la_OBJECTS) $(libbsm_la_DEPENDENCIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } +libbsm.la: $(libbsm_la_OBJECTS) $(libbsm_la_DEPENDENCIES) $(EXTRA_libbsm_la_DEPENDENCIES) $(LINK) -rpath $(libdir) $(libbsm_la_OBJECTS) $(libbsm_la_LIBADD) $(LIBS) mostlyclean-compile: @@ -311,21 +370,21 @@ distclean-compile: .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< @@ -335,65 +394,61 @@ mostlyclean-libtool: clean-libtool: -rm -rf .libs _libs -install-man3: $(man3_MANS) $(man_MANS) +install-man3: $(man3_MANS) @$(NORMAL_INSTALL) - test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)" - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.3*) list="$$list $$i" ;; \ - esac; \ + @list1='$(man3_MANS)'; \ + list2=''; \ + test -n "$(man3dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.3[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 3*) ;; \ - *) ext='3' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst"; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ + done; } + uninstall-man3: @$(NORMAL_UNINSTALL) - @list='$(man3_MANS) $(dist_man3_MANS) $(nodist_man3_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.3*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 3*) ;; \ - *) ext='3' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man3dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man3dir)/$$inst"; \ - done + @list='$(man3_MANS)'; test -n "$(man3dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir) ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -401,34 +456,66 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically 'make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -444,13 +531,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -471,16 +562,22 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -502,6 +599,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -510,18 +609,28 @@ install-data-am: install-man install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-libLTLIBRARIES install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-man3 install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -549,7 +658,7 @@ uninstall-man: uninstall-man3 .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libLTLIBRARIES clean-libtool ctags distclean \ + clean-libLTLIBRARIES clean-libtool cscopelist ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ @@ -563,6 +672,7 @@ uninstall-man: uninstall-man3 tags uninstall uninstall-am uninstall-libLTLIBRARIES \ uninstall-man uninstall-man3 + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/libbsm/au_control.3 b/libbsm/au_control.3 index b3576ef1c87f..622fae21df3f 100644 --- a/libbsm/au_control.3 +++ b/libbsm/au_control.3 @@ -23,7 +23,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_control.3#11 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_control.3#17 $ .\" .Dd April 19, 2005 .Dt AU_CONTROL 3 @@ -32,10 +32,12 @@ .Nm setac , .Nm endac , .Nm getacdir , -.Nm getacmin , +.Nm getacdist , .Nm getacexpire , .Nm getacfilesz , .Nm getacflg , +.Nm getachost , +.Nm getacmin , .Nm getacna , .Nm getacpol , .Nm au_poltostr , @@ -52,7 +54,7 @@ .Ft int .Fn getacdir "char *name" "int len" .Ft int -.Fn getacmin "int *min_val" +.Fn getacdist "void" .Ft int .Fn getacexpire "int *andflg, time_t *age, size_t *size" .Ft int @@ -60,6 +62,10 @@ .Ft int .Fn getacflg "char *auditstr" "int len" .Ft int +.Fn getachost "char *auditstr" "int len" +.Ft int +.Fn getacmin "int *min_val" +.Ft int .Fn getacna "char *auditstr" "int len" .Ft int .Fn getacpol "char *auditstr" "size_t len" @@ -96,16 +102,13 @@ of length .Fa len . .Pp The -.Fn getacmin -function -returns the minimum free disk space for the audit log target file system via -the passed -.Fa min_val -variable. +.Fn getacdist +function returns a value that allows to decide if trail files distribution is +turned on or off. .Pp The .Fn getacexpire -function +function returns the audit trail file expiration parameters in the passed .Vt int buffer @@ -113,7 +116,7 @@ buffer .Vt time_t buffer .Fa age -and +and .Vt size_t buffer .Fa size . @@ -138,6 +141,23 @@ of length .Fa len . .Pp The +.Fn getachost +function +returns the local systems's audit host information via the the passed character +buffer +.Fa auditstr +of length +.Fa len . +.Pp +The +.Fn getacmin +function +returns the minimum free disk space for the audit log target file system via +the passed +.Fa min_val +variable. +.Pp +The .Fn getacna function returns the non-attributable flags via the passed character buffer @@ -172,10 +192,12 @@ to a numeric audit policy mask returned via .Fa policy . .Sh RETURN VALULES The +.Fn getacfilesz , .Fn getacdir , -.Fn getacmin , .Fn getacexpire , .Fn getacflg , +.Fn getachost , +.Fn getacmin , .Fn getacna , .Fn getacpol , and @@ -191,6 +213,11 @@ function returns a string length of 0 or more on success, or a negative value on if there is a failure. .Pp +The +.Fn getacdist +function returns 1 if trail files distribution is turned on, 0 if it is turned +off or negative value on failure. +.Pp Functions that return a string value will return a failure if there is insufficient room in the passed character buffer for the full string. .Sh SEE ALSO @@ -221,7 +248,7 @@ The implementation should be changed to return an error via when .Dv NULL is returned. -.Sh BUGS +.Pp There is no reason for the .Fn setac interface to be exposed as part of the public API, as it is called implicitly diff --git a/libbsm/au_fcntl_cmd.3 b/libbsm/au_fcntl_cmd.3 index 7f03666a02dd..7843c94efb90 100644 --- a/libbsm/au_fcntl_cmd.3 +++ b/libbsm/au_fcntl_cmd.3 @@ -26,9 +26,9 @@ .\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_fcntl_cmd.3#1 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_fcntl_cmd.3#2 $ .\" -.Dd March 5, 2009 +.Dd March 5, 2009 .Dt AU_BSM_TO_FCNTL_CMD 3 .Os .Sh NAME @@ -65,12 +65,12 @@ The .Fn au_fcntl_cmd_to_bsm function accepts a local .Xr fcntl 2 -command value, and returns the BSM +command value, and returns the BSM .Xr fcntl 2 -command value for it. This call cannot fail, and instead returns a BSM +command value for it. This call cannot fail, and instead returns a BSM command value indicating to a later decoder that the command value could not be encoded. -.Sh RETURN VALULES +.Sh RETURN VALUES On success, .Fn au_bsm_to_fcntl_cmd returns 0 and a converted command value; on failure, it returns -1 but does @@ -90,7 +90,7 @@ and were introduced in OpenBSM 1.1. .Sh AUTHORS These functions were implemented by -.An Stacey Son +.An Stacey Son under contract to Apple Inc. .Pp The Basic Security Module (BSM) interface to audit records and audit event diff --git a/libbsm/au_io.3 b/libbsm/au_io.3 index 5e9045f960f6..bd8e5a12066a 100644 --- a/libbsm/au_io.3 +++ b/libbsm/au_io.3 @@ -1,4 +1,5 @@ .\"- +.\" Copyright (c) 2009 Apple, Inc. .\" Copyright (c) 2005 Robert N. M. Watson .\" All rights reserved. .\" @@ -23,14 +24,15 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_io.3#5 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/au_io.3#9 $ .\" -.Dd April 19, 2005 +.Dd August 4, 2009 .Dt AU_IO 3 .Os .Sh NAME .Nm au_fetch_tok , .Nm au_print_tok , +.Nm au_print_flags_tok , .Nm au_read_rec .Nd "perform I/O involving an audit record" .Sh LIBRARY @@ -43,6 +45,10 @@ .Fo au_print_tok .Fa "FILE *outfp" "tokenstr_t *tok" "char *del" "char raw" "char sfrm" .Fc +.Ft void +.Fo au_print_flags_tok +.Fa "FILE *outfp" "tokenstr_t *tok" "char *del" "int oflags" +.Fc .Ft int .Fn au_read_rec "FILE *fp" "u_char **buf" .Sh DESCRIPTION @@ -73,6 +79,30 @@ is set non-zero. The delimiter .Fa del is used when printing. +The +.Fn au_print_flags_tok +function is a replacement for +.Fn au_print_tok . +The +.Fa oflags +controls how the output should be formatted and is specified by +or'ing the following flags: +.Pp +.Bl -tag -width AU_OFLAG_NORESOLVE -compact -offset indent +.It Li AU_OFLAG_NONE +Use the default form. +.It Li AU_OFLAG_NORESOLVE +Leave user and group IDs in their numeric form. +.It Li AU_OFLAG_RAW +Use the raw, numeric form. +.It Li AU_OFLAG_SHORT +Use the short form. +.It Li AU_OFLAG_XML +Use the XML form. +.El +.Pp +The flags options AU_OFLAG_SHORT and AU_OFLAG_RAW are exclusive and +should not be used together. .Pp The .Fn au_read_rec @@ -92,7 +122,7 @@ Each record would be broken down into components tokens through sequential calls to .Fn au_fetch_tok on the buffer, and then invoking -.Fn au_print_tok +.Fn au_print_flags_tok to print each token to an output stream such as .Dv stdout . On completion of the processing of each record, a call to @@ -117,6 +147,15 @@ The OpenBSM implementation was created by McAfee Research, the security division of McAfee Inc., under contract to Apple Computer, Inc., in 2004. It was subsequently adopted by the TrustedBSD Project as the foundation for the OpenBSM distribution. +.Pp +The +.Fn au_print_flags_tok +function was added by Stacey Son as a replacement for the +.Fn au_print_tok +so new output formatting flags can be easily added without changing the API. +The +.Fn au_print_tok +is obsolete but remains in the API to support legacy code. .Sh AUTHORS .An -nosplit This software was created by diff --git a/libbsm/audit_submit.3 b/libbsm/audit_submit.3 index b6c28a7142a2..a320c7c2fdc8 100644 --- a/libbsm/audit_submit.3 +++ b/libbsm/audit_submit.3 @@ -27,10 +27,10 @@ .\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/audit_submit.3#17 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/libbsm/audit_submit.3#18 $ .\" .Dd January 18, 2008 -.Dt audit_submit 3 +.Dt AUDIT_SUBMIT 3 .Os .Sh NAME .Nm audit_submit @@ -88,6 +88,13 @@ subject will be retrieved from the kernel via .Xr getaudit 2 , or .Xr getaudit_addr 2 . +.Sh RETURN VALUES +If successful, +.Nm +will return zero. +Otherwise a -1 is returned and the global variable +.Va errno +is set to indicate the error. .Sh EXAMPLES .Bd -literal -offset indent #include <bsm/audit.h> @@ -131,13 +138,6 @@ text,bad su from from csjp to root return,failure : Operation not permitted,1 trailer,94 .Ed -.Sh RETURN VALUES -If successful, -.Nm -will return zero. -Otherwise a -1 is returned and the global variable -.Va errno -is set to indicate the error. .Sh SEE ALSO .Xr auditon 2 , .Xr getaudit 2 , diff --git a/libbsm/bsm_control.c b/libbsm/bsm_control.c index 378035db729e..baaa0a5f48b2 100644 --- a/libbsm/bsm_control.c +++ b/libbsm/bsm_control.c @@ -27,7 +27,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_control.c#34 $ + * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_control.c#41 $ */ #include <config/config.h> @@ -37,6 +37,7 @@ #include <ctype.h> #include <errno.h> #include <string.h> +#include <strings.h> #ifdef HAVE_PTHREAD_MUTEX_LOCK #include <pthread.h> #endif @@ -71,8 +72,8 @@ static pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER; * Audit policy string token table for au_poltostr() and au_strtopol(). */ struct audit_polstr { - long ap_policy; - const char *ap_str; + long ap_policy; + const char *ap_str; }; static struct audit_polstr au_polstr[] = { @@ -100,7 +101,7 @@ static struct audit_polstr au_polstr[] = { * Must be called with mutex held. */ static int -getstrfromtype_locked(char *name, char **str) +getstrfromtype_locked(const char *name, char **str) { char *type, *nl; char *tokptr; @@ -183,7 +184,7 @@ au_timetosec(time_t *seconds, u_long value, char mult) } /* - * Convert a given disk space value with a multiplier (bytes, kilobytes, + * Convert a given disk space value with a multiplier (bytes, kilobytes, * megabytes, gigabytes) to bytes. Return 0 on success. */ static int @@ -397,6 +398,43 @@ getacdir(char *name, int len) } /* + * Return 1 if dist value is set to 'yes' or 'on'. + * Return 0 if dist value is set to something else. + * Return negative value on error. + */ +int +getacdist(void) +{ + char *str; + int ret; + +#ifdef HAVE_PTHREAD_MUTEX_LOCK + pthread_mutex_lock(&mutex); +#endif + setac_locked(); + if (getstrfromtype_locked(DIST_CONTROL_ENTRY, &str) < 0) { +#ifdef HAVE_PTHREAD_MUTEX_LOCK + pthread_mutex_unlock(&mutex); +#endif + return (-2); + } + if (str == NULL) { +#ifdef HAVE_PTHREAD_MUTEX_LOCK + pthread_mutex_unlock(&mutex); +#endif + return (0); + } + if (strcasecmp(str, "on") == 0 || strcasecmp(str, "yes") == 0) + ret = 1; + else + ret = 0; +#ifdef HAVE_PTHREAD_MUTEX_LOCK + pthread_mutex_unlock(&mutex); +#endif + return (ret); +} + +/* * Return the minimum free diskspace value from the audit control file. */ int @@ -418,7 +456,7 @@ getacmin(int *min_val) #ifdef HAVE_PTHREAD_MUTEX_LOCK pthread_mutex_unlock(&mutex); #endif - return (1); + return (-1); } *min_val = atoi(min); #ifdef HAVE_PTHREAD_MUTEX_LOCK @@ -453,7 +491,7 @@ getacfilesz(size_t *filesz_val) pthread_mutex_unlock(&mutex); #endif errno = EINVAL; - return (1); + return (-1); } /* Trim off any leading white space. */ @@ -498,11 +536,8 @@ getacfilesz(size_t *filesz_val) return (0); } -/* - * Return the system audit value from the audit contol file. - */ -int -getacflg(char *auditstr, int len) +static int +getaccommon(const char *name, char *auditstr, int len) { char *str; @@ -510,7 +545,7 @@ getacflg(char *auditstr, int len) pthread_mutex_lock(&mutex); #endif setac_locked(); - if (getstrfromtype_locked(FLAGS_CONTROL_ENTRY, &str) < 0) { + if (getstrfromtype_locked(name, &str) < 0) { #ifdef HAVE_PTHREAD_MUTEX_LOCK pthread_mutex_unlock(&mutex); #endif @@ -520,7 +555,7 @@ getacflg(char *auditstr, int len) #ifdef HAVE_PTHREAD_MUTEX_LOCK pthread_mutex_unlock(&mutex); #endif - return (1); + return (-1); } if (strlen(str) >= (size_t)len) { #ifdef HAVE_PTHREAD_MUTEX_LOCK @@ -536,40 +571,23 @@ getacflg(char *auditstr, int len) } /* + * Return the system audit value from the audit contol file. + */ +int +getacflg(char *auditstr, int len) +{ + + return (getaccommon(FLAGS_CONTROL_ENTRY, auditstr, len)); +} + +/* * Return the non attributable flags from the audit contol file. */ int getacna(char *auditstr, int len) { - char *str; -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_lock(&mutex); -#endif - setac_locked(); - if (getstrfromtype_locked(NA_CONTROL_ENTRY, &str) < 0) { -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (-2); - } - if (str == NULL) { -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (1); - } - if (strlen(str) >= (size_t)len) { -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (-3); - } - strlcpy(auditstr, str, len); -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (0); + return (getaccommon(NA_CONTROL_ENTRY, auditstr, len)); } /* @@ -578,69 +596,15 @@ getacna(char *auditstr, int len) int getacpol(char *auditstr, size_t len) { - char *str; -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_lock(&mutex); -#endif - setac_locked(); - if (getstrfromtype_locked(POLICY_CONTROL_ENTRY, &str) < 0) { -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (-2); - } - if (str == NULL) { -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (-1); - } - if (strlen(str) >= len) { -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (-3); - } - strlcpy(auditstr, str, len); -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (0); + return (getaccommon(POLICY_CONTROL_ENTRY, auditstr, len)); } int getachost(char *auditstr, size_t len) { - char *str; -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_lock(&mutex); -#endif - setac_locked(); - if (getstrfromtype_locked(AUDIT_HOST_CONTROL_ENTRY, &str) < 0) { -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (-2); - } - if (str == NULL) { -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (1); - } - if (strlen(str) >= len) { -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (-3); - } - strlcpy(auditstr, str, len); -#ifdef HAVE_PTHREAD_MUTEX_LOCK - pthread_mutex_unlock(&mutex); -#endif - return (0); + return (getaccommon(HOST_CONTROL_ENTRY, auditstr, len)); } /* @@ -686,12 +650,12 @@ getacexpire(int *andflg, time_t *age, size_t *size) #ifdef HAVE_PTHREAD_MUTEX_LOCK pthread_mutex_unlock(&mutex); #endif - return (1); + return (-1); } /* First, trim off any leading white space. */ while (*str == ' ' || *str == '\t') - str++; + str++; nparsed = sscanf(str, "%lu%c%[ \tadnorADNOR]%lu%c", &val1, &mult1, andor, &val2, &mult2); @@ -713,7 +677,7 @@ getacexpire(int *andflg, time_t *age, size_t *size) case 5: /* Two expiration conditions. */ - if (setexpirecond(age, size, val1, mult1) != 0 || + if (setexpirecond(age, size, val1, mult1) != 0 || setexpirecond(age, size, val2, mult2) != 0) { #ifdef HAVE_PTHREAD_MUTEX_LOCK pthread_mutex_unlock(&mutex); diff --git a/libbsm/bsm_errno.c b/libbsm/bsm_errno.c index 2ca70094e7e3..8682fc784e73 100644 --- a/libbsm/bsm_errno.c +++ b/libbsm/bsm_errno.c @@ -26,7 +26,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_errno.c#19 $ + * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_errno.c#22 $ */ #include <sys/types.h> @@ -664,7 +664,7 @@ static const struct bsm_errno bsm_errnos[] = { #endif ES("Required key not available") }, { BSM_ERRNO_EKEYEXPIRED, -#ifdef EKEEXPIRED +#ifdef EKEYEXPIRED EKEYEXPIRED, #else ERRNO_NO_LOCAL_MAPPING, @@ -678,12 +678,26 @@ static const struct bsm_errno bsm_errnos[] = { #endif ES("Key has been revoked") }, { BSM_ERRNO_EKEYREJECTED, -#ifdef EKEREJECTED +#ifdef EKEYREJECTED EKEYREJECTED, #else ERRNO_NO_LOCAL_MAPPING, #endif ES("Key was rejected by service") }, + { BSM_ERRNO_ENOTCAPABLE, +#ifdef ENOTCAPABLE + ENOTCAPABLE, +#else + ERRNO_NO_LOCAL_MAPPING, +#endif + ES("Capabilities insufficient") }, + { BSM_ERRNO_ECAPMODE, +#ifdef ECAPMODE + ECAPMODE, +#else + ERRNO_NO_LOCAL_MAPPING, +#endif + ES("Not permitted in capability mode") }, }; static const int bsm_errnos_count = sizeof(bsm_errnos) / sizeof(bsm_errnos[0]); diff --git a/libbsm/bsm_io.c b/libbsm/bsm_io.c index 2dd133013e47..0de8080977ac 100644 --- a/libbsm/bsm_io.c +++ b/libbsm/bsm_io.c @@ -1,5 +1,5 @@ /*- - * Copyright (c) 2004-2008 Apple Inc. + * Copyright (c) 2004-2009 Apple Inc. * Copyright (c) 2005 SPARTA, Inc. * Copyright (c) 2006 Robert N. M. Watson * Copyright (c) 2006 Martin Voros @@ -32,26 +32,29 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_io.c#63 $ + * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_io.c#74 $ */ #include <sys/types.h> #include <config/config.h> -#if defined(HAVE_SYS_ENDIAN_H) && defined(HAVE_BE32ENC) + +#ifdef USE_ENDIAN_H +#include <endian.h> +#endif +#ifdef USE_SYS_ENDIAN_H #include <sys/endian.h> -#else /* !HAVE_SYS_ENDIAN_H || !HAVE_BE32ENC */ -#ifdef HAVE_MACHINE_ENDIAN_H +#endif +#ifdef USE_MACHINE_ENDIAN_H #include <machine/endian.h> -#else /* !HAVE_MACHINE_ENDIAN_H */ -#ifdef HAVE_ENDIAN_H -#include <endian.h> -#else /* !HAVE_ENDIAN_H */ -#error "No supported endian.h" -#endif /* !HAVE_ENDIAN_H */ -#endif /* !HAVE_MACHINE_ENDIAN_H */ +#endif +#ifdef USE_COMPAT_ENDIAN_H #include <compat/endian.h> -#endif /* !HAVE_SYS_ENDIAN_H || !HAVE_BE32ENC */ +#endif +#ifdef USE_COMPAT_ENDIAN_ENC_H +#include <compat/endian_enc.h> +#endif + #ifdef HAVE_FULL_QUEUE_H #include <sys/queue.h> #else /* !HAVE_FULL_QUEUE_H */ @@ -74,6 +77,12 @@ #include <pwd.h> #include <grp.h> +#ifdef HAVE_VIS +#include <vis.h> +#else +#include <compat/vis.h> +#endif + #include <bsm/audit_internal.h> #define READ_TOKEN_BYTES(buf, len, dest, size, bytesread, err) do { \ @@ -106,7 +115,7 @@ (dest) = be32dec((buf) + (bytesread)); \ (bytesread) += sizeof(u_int32_t); \ } else \ - (err) = 1; \ + (err) = 1; \ } while (0) #define READ_TOKEN_U_INT64(buf, len, dest, bytesread, err) do { \ @@ -114,7 +123,7 @@ dest = be64dec((buf) + (bytesread)); \ (bytesread) += sizeof(u_int64_t); \ } else \ - (err) = 1; \ + (err) = 1; \ } while (0) #define SET_PTR(buf, len, ptr, size, bytesread, err) do { \ @@ -214,6 +223,51 @@ print_string(FILE *fp, const char *str, size_t len) } /* + * Prints the given data bytes as an XML-sanitized string. + */ +static void +print_xml_string(FILE *fp, const char *str, size_t len) +{ + u_int32_t i; + char visbuf[5]; + + if (len == 0) + return; + + for (i = 0; i < len; i++) { + switch (str[i]) { + case '\0': + return; + + case '&': + (void) fprintf(fp, "&"); + break; + + case '<': + (void) fprintf(fp, "<"); + break; + + case '>': + (void) fprintf(fp, ">"); + break; + + case '\"': + (void) fprintf(fp, """); + break; + + case '\'': + (void) fprintf(fp, "'"); + break; + + default: + (void) vis(visbuf, str[i], VIS_CSTYLE, 0); + (void) fprintf(fp, "%s", visbuf); + break; + } + } +} + +/* * Prints the beggining of attribute. */ static void @@ -407,10 +461,10 @@ close_tag(FILE *fp, u_char type) * Prints the token type in either the raw or the default form. */ static void -print_tok_type(FILE *fp, u_char type, const char *tokname, char raw, int xml) +print_tok_type(FILE *fp, u_char type, const char *tokname, int oflags) { - if (xml) { + if (oflags & AU_OFLAG_XML) { switch(type) { case AUT_HEADER32: fprintf(fp, "<record "); @@ -576,7 +630,7 @@ print_tok_type(FILE *fp, u_char type, const char *tokname, char raw, int xml) break; } } else { - if (raw) + if (oflags & AU_OFLAG_RAW) fprintf(fp, "%u", type); else fprintf(fp, "%s", tokname); @@ -587,11 +641,11 @@ print_tok_type(FILE *fp, u_char type, const char *tokname, char raw, int xml) * Prints a user value. */ static void -print_user(FILE *fp, u_int32_t usr, char raw) +print_user(FILE *fp, u_int32_t usr, int oflags) { struct passwd *pwent; - if (raw) + if (oflags & AU_OFLAG_RAW) fprintf(fp, "%d", usr); else { pwent = getpwuid(usr); @@ -606,11 +660,11 @@ print_user(FILE *fp, u_int32_t usr, char raw) * Prints a group value. */ static void -print_group(FILE *fp, u_int32_t grp, char raw) +print_group(FILE *fp, u_int32_t grp, int oflags) { struct group *grpent; - if (raw) + if (oflags & AU_OFLAG_RAW) fprintf(fp, "%d", grp); else { grpent = getgrgid(grp); @@ -626,7 +680,7 @@ print_group(FILE *fp, u_int32_t grp, char raw) * form. */ static void -print_event(FILE *fp, u_int16_t ev, char raw, char sfrm) +print_event(FILE *fp, u_int16_t ev, int oflags) { char event_ent_name[AU_EVENT_NAME_MAX]; char event_ent_desc[AU_EVENT_DESC_MAX]; @@ -644,9 +698,9 @@ print_event(FILE *fp, u_int16_t ev, char raw, char sfrm) return; } - if (raw) + if (oflags & AU_OFLAG_RAW) fprintf(fp, "%u", ev); - else if (sfrm) + else if (oflags & AU_OFLAG_SHORT) fprintf(fp, "%s", e.ae_name); else fprintf(fp, "%s", e.ae_desc); @@ -658,9 +712,9 @@ print_event(FILE *fp, u_int16_t ev, char raw, char sfrm) * raw form. */ static void -print_evmod(FILE *fp, u_int16_t evmod, char raw) +print_evmod(FILE *fp, u_int16_t evmod, int oflags) { - if (raw) + if (oflags & AU_OFLAG_RAW) fprintf(fp, "%u", evmod); else fprintf(fp, "%u", evmod); @@ -670,12 +724,12 @@ print_evmod(FILE *fp, u_int16_t evmod, char raw) * Prints seconds in the ctime format. */ static void -print_sec32(FILE *fp, u_int32_t sec, char raw) +print_sec32(FILE *fp, u_int32_t sec, int oflags) { time_t timestamp; char timestr[26]; - if (raw) + if (oflags & AU_OFLAG_RAW) fprintf(fp, "%u", sec); else { timestamp = (time_t)sec; @@ -690,12 +744,12 @@ print_sec32(FILE *fp, u_int32_t sec, char raw) * assume a 32-bit time_t, we simply truncate for now. */ static void -print_sec64(FILE *fp, u_int64_t sec, char raw) +print_sec64(FILE *fp, u_int64_t sec, int oflags) { time_t timestamp; char timestr[26]; - if (raw) + if (oflags & AU_OFLAG_RAW) fprintf(fp, "%u", (u_int32_t)sec); else { timestamp = (time_t)sec; @@ -709,9 +763,9 @@ print_sec64(FILE *fp, u_int64_t sec, char raw) * Prints the excess milliseconds. */ static void -print_msec32(FILE *fp, u_int32_t msec, char raw) +print_msec32(FILE *fp, u_int32_t msec, int oflags) { - if (raw) + if (oflags & AU_OFLAG_RAW) fprintf(fp, "%u", msec); else fprintf(fp, " + %u msec", msec); @@ -722,11 +776,11 @@ print_msec32(FILE *fp, u_int32_t msec, char raw) * a 32-bit msec, we simply truncate for now. */ static void -print_msec64(FILE *fp, u_int64_t msec, char raw) +print_msec64(FILE *fp, u_int64_t msec, int oflags) { msec &= 0xffffffff; - if (raw) + if (oflags & AU_OFLAG_RAW) fprintf(fp, "%u", (u_int32_t)msec); else fprintf(fp, " + %u msec", (u_int32_t)msec); @@ -776,11 +830,11 @@ print_ip_ex_address(FILE *fp, u_int32_t type, u_int32_t *ipaddr) * Prints return value as success or failure. */ static void -print_retval(FILE *fp, u_char status, char raw) +print_retval(FILE *fp, u_char status, int oflags) { int error; - if (raw) + if (oflags & AU_OFLAG_RAW) fprintf(fp, "%u", status); else { /* @@ -813,9 +867,9 @@ print_errval(FILE *fp, u_int32_t val) * Prints IPC type. */ static void -print_ipctype(FILE *fp, u_char type, char raw) +print_ipctype(FILE *fp, u_char type, int oflags) { - if (raw) + if (oflags & AU_OFLAG_RAW) fprintf(fp, "%u", type); else { if (type == AT_IPC_MSG) @@ -835,7 +889,7 @@ print_ipctype(FILE *fp, u_char type, char raw) void au_print_xml_header(FILE *outfp) { - + fprintf(outfp, "<?xml version='1.0' ?>\n"); fprintf(outfp, "<audit>\n"); } @@ -846,7 +900,7 @@ au_print_xml_header(FILE *outfp) void au_print_xml_footer(FILE *outfp) { - + fprintf(outfp, "</audit>\n"); } @@ -891,26 +945,25 @@ fetch_header32_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_header32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, char sfrm, - int xml) +print_header32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "header", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "header", oflags); + if (oflags & AU_OFLAG_RAW) { open_attr(fp, "version"); print_1_byte(fp, tok->tt.hdr32.version, "%u"); close_attr(fp); open_attr(fp, "event"); - print_event(fp, tok->tt.hdr32.e_type, raw, sfrm); + print_event(fp, tok->tt.hdr32.e_type, oflags); close_attr(fp); open_attr(fp, "modifier"); - print_evmod(fp, tok->tt.hdr32.e_mod, raw); + print_evmod(fp, tok->tt.hdr32.e_mod, oflags); close_attr(fp); open_attr(fp, "time"); - print_sec32(fp, tok->tt.hdr32.s, raw); + print_sec32(fp, tok->tt.hdr32.s, oflags); close_attr(fp); open_attr(fp, "msec"); - print_msec32(fp, tok->tt.hdr32.ms, 1); + print_msec32(fp, tok->tt.hdr32.ms, oflags); close_attr(fp); close_tag(fp, tok->id); } else { @@ -919,13 +972,13 @@ print_header32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, char sfrm, print_delim(fp, del); print_1_byte(fp, tok->tt.hdr32.version, "%u"); print_delim(fp, del); - print_event(fp, tok->tt.hdr32.e_type, raw, sfrm); + print_event(fp, tok->tt.hdr32.e_type, oflags); print_delim(fp, del); - print_evmod(fp, tok->tt.hdr32.e_mod, raw); + print_evmod(fp, tok->tt.hdr32.e_mod, oflags); print_delim(fp, del); - print_sec32(fp, tok->tt.hdr32.s, raw); + print_sec32(fp, tok->tt.hdr32.s, oflags); print_delim(fp, del); - print_msec32(fp, tok->tt.hdr32.ms, raw); + print_msec32(fp, tok->tt.hdr32.ms, oflags); } } @@ -999,30 +1052,29 @@ fetch_header32_ex_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_header32_ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - char sfrm, int xml) +print_header32_ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "header_ex", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "header_ex", oflags); + if (oflags & AU_OFLAG_RAW) { open_attr(fp, "version"); print_1_byte(fp, tok->tt.hdr32_ex.version, "%u"); close_attr(fp); open_attr(fp, "event"); - print_event(fp, tok->tt.hdr32_ex.e_type, raw, sfrm); + print_event(fp, tok->tt.hdr32_ex.e_type, oflags); close_attr(fp); open_attr(fp, "modifier"); - print_evmod(fp, tok->tt.hdr32_ex.e_mod, raw); + print_evmod(fp, tok->tt.hdr32_ex.e_mod, oflags); close_attr(fp); open_attr(fp, "host"); print_ip_ex_address(fp, tok->tt.hdr32_ex.ad_type, tok->tt.hdr32_ex.addr); close_attr(fp); open_attr(fp, "time"); - print_sec32(fp, tok->tt.hdr32_ex.s, raw); + print_sec32(fp, tok->tt.hdr32_ex.s, oflags); close_attr(fp); open_attr(fp, "msec"); - print_msec32(fp, tok->tt.hdr32_ex.ms, raw); + print_msec32(fp, tok->tt.hdr32_ex.ms, oflags); close_attr(fp); close_tag(fp, tok->id); } else { @@ -1031,16 +1083,16 @@ print_header32_ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, print_delim(fp, del); print_1_byte(fp, tok->tt.hdr32_ex.version, "%u"); print_delim(fp, del); - print_event(fp, tok->tt.hdr32_ex.e_type, raw, sfrm); + print_event(fp, tok->tt.hdr32_ex.e_type, oflags); print_delim(fp, del); - print_evmod(fp, tok->tt.hdr32_ex.e_mod, raw); + print_evmod(fp, tok->tt.hdr32_ex.e_mod, oflags); print_delim(fp, del); print_ip_ex_address(fp, tok->tt.hdr32_ex.ad_type, tok->tt.hdr32_ex.addr); print_delim(fp, del); - print_sec32(fp, tok->tt.hdr32_ex.s, raw); + print_sec32(fp, tok->tt.hdr32_ex.s, oflags); print_delim(fp, del); - print_msec32(fp, tok->tt.hdr32_ex.ms, raw); + print_msec32(fp, tok->tt.hdr32_ex.ms, oflags); } } @@ -1085,26 +1137,25 @@ fetch_header64_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_header64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, char sfrm, - int xml) +print_header64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - - print_tok_type(fp, tok->id, "header", raw, xml); - if (xml) { + + print_tok_type(fp, tok->id, "header", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "version"); print_1_byte(fp, tok->tt.hdr64.version, "%u"); close_attr(fp); open_attr(fp, "event"); - print_event(fp, tok->tt.hdr64.e_type, raw, sfrm); + print_event(fp, tok->tt.hdr64.e_type, oflags); close_attr(fp); open_attr(fp, "modifier"); - print_evmod(fp, tok->tt.hdr64.e_mod, raw); + print_evmod(fp, tok->tt.hdr64.e_mod, oflags); close_attr(fp); open_attr(fp, "time"); - print_sec64(fp, tok->tt.hdr64.s, raw); + print_sec64(fp, tok->tt.hdr64.s, oflags); close_attr(fp); open_attr(fp, "msec"); - print_msec64(fp, tok->tt.hdr64.ms, raw); + print_msec64(fp, tok->tt.hdr64.ms, oflags); close_attr(fp); close_tag(fp, tok->id); } else { @@ -1113,13 +1164,13 @@ print_header64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, char sfrm, print_delim(fp, del); print_1_byte(fp, tok->tt.hdr64.version, "%u"); print_delim(fp, del); - print_event(fp, tok->tt.hdr64.e_type, raw, sfrm); + print_event(fp, tok->tt.hdr64.e_type, oflags); print_delim(fp, del); - print_evmod(fp, tok->tt.hdr64.e_mod, raw); + print_evmod(fp, tok->tt.hdr64.e_mod, oflags); print_delim(fp, del); - print_sec64(fp, tok->tt.hdr64.s, raw); + print_sec64(fp, tok->tt.hdr64.s, oflags); print_delim(fp, del); - print_msec64(fp, tok->tt.hdr64.ms, raw); + print_msec64(fp, tok->tt.hdr64.ms, oflags); } } @@ -1189,30 +1240,29 @@ fetch_header64_ex_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_header64_ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - char sfrm, int xml) +print_header64_ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "header_ex", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "header_ex", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "version"); print_1_byte(fp, tok->tt.hdr64_ex.version, "%u"); close_attr(fp); open_attr(fp, "event"); - print_event(fp, tok->tt.hdr64_ex.e_type, raw, sfrm); + print_event(fp, tok->tt.hdr64_ex.e_type, oflags); close_attr(fp); open_attr(fp, "modifier"); - print_evmod(fp, tok->tt.hdr64_ex.e_mod, raw); + print_evmod(fp, tok->tt.hdr64_ex.e_mod, oflags); close_attr(fp); open_attr(fp, "host"); print_ip_ex_address(fp, tok->tt.hdr64_ex.ad_type, tok->tt.hdr64_ex.addr); close_attr(fp); open_attr(fp, "time"); - print_sec64(fp, tok->tt.hdr64_ex.s, raw); + print_sec64(fp, tok->tt.hdr64_ex.s, oflags); close_attr(fp); open_attr(fp, "msec"); - print_msec64(fp, tok->tt.hdr64_ex.ms, raw); + print_msec64(fp, tok->tt.hdr64_ex.ms, oflags); close_attr(fp); close_tag(fp, tok->id); } else { @@ -1221,16 +1271,16 @@ print_header64_ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, print_delim(fp, del); print_1_byte(fp, tok->tt.hdr64_ex.version, "%u"); print_delim(fp, del); - print_event(fp, tok->tt.hdr64_ex.e_type, raw, sfrm); + print_event(fp, tok->tt.hdr64_ex.e_type, oflags); print_delim(fp, del); - print_evmod(fp, tok->tt.hdr64_ex.e_mod, raw); + print_evmod(fp, tok->tt.hdr64_ex.e_mod, oflags); print_delim(fp, del); print_ip_ex_address(fp, tok->tt.hdr64_ex.ad_type, tok->tt.hdr64_ex.addr); print_delim(fp, del); - print_sec64(fp, tok->tt.hdr64_ex.s, raw); + print_sec64(fp, tok->tt.hdr64_ex.s, oflags); print_delim(fp, del); - print_msec64(fp, tok->tt.hdr64_ex.ms, raw); + print_msec64(fp, tok->tt.hdr64_ex.ms, oflags); } } @@ -1255,12 +1305,11 @@ fetch_trailer_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_trailer_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_trailer_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "trailer", raw, xml); - if (!xml) { + print_tok_type(fp, tok->id, "trailer", oflags); + if (!(oflags & AU_OFLAG_XML)) { print_delim(fp, del); print_4_bytes(fp, tok->tt.trail.count, "%u"); } @@ -1298,12 +1347,11 @@ fetch_arg32_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_arg32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_arg32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "argument", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "argument", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "arg-num"); print_1_byte(fp, tok->tt.arg32.no, "%u"); close_attr(fp); @@ -1350,12 +1398,11 @@ fetch_arg64_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_arg64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_arg64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "argument", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "argument", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "arg-num"); print_1_byte(fp, tok->tt.arg64.no, "%u"); close_attr(fp); @@ -1435,16 +1482,15 @@ fetch_arb_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_arb_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_arb_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { char *str; char *format; size_t size; int i; - print_tok_type(fp, tok->id, "arbitrary", raw, xml); - if (!xml) + print_tok_type(fp, tok->id, "arbitrary", oflags); + if (!(oflags & AU_OFLAG_XML)) print_delim(fp, del); switch(tok->tt.arb.howtopr) { @@ -1477,7 +1523,7 @@ print_arb_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, return; } - if (xml) { + if (oflags & AU_OFLAG_XML) { open_attr(fp, "print"); fprintf(fp, "%s",str); close_attr(fp); @@ -1490,7 +1536,7 @@ print_arb_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, /* case AUR_CHAR: */ str = "byte"; size = AUR_BYTE_SIZE; - if (xml) { + if (oflags & AU_OFLAG_XML) { open_attr(fp, "type"); fprintf(fp, "%zu", size); close_attr(fp); @@ -1516,7 +1562,7 @@ print_arb_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, case AUR_SHORT: str = "short"; size = AUR_SHORT_SIZE; - if (xml) { + if (oflags & AU_OFLAG_XML) { open_attr(fp, "type"); fprintf(fp, "%zu", size); close_attr(fp); @@ -1545,7 +1591,7 @@ print_arb_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, /* case AUR_INT: */ str = "int"; size = AUR_INT32_SIZE; - if (xml) { + if (oflags & AU_OFLAG_XML) { open_attr(fp, "type"); fprintf(fp, "%zu", size); close_attr(fp); @@ -1573,7 +1619,7 @@ print_arb_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, case AUR_INT64: str = "int64"; size = AUR_INT64_SIZE; - if (xml) { + if (oflags & AU_OFLAG_XML) { open_attr(fp, "type"); fprintf(fp, "%zu", size); close_attr(fp); @@ -1644,20 +1690,19 @@ fetch_attr32_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_attr32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_attr32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "attribute", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "attribute", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "mode"); print_4_bytes(fp, tok->tt.attr32.mode, "%o"); close_attr(fp); open_attr(fp, "uid"); - print_user(fp, tok->tt.attr32.uid, raw); + print_user(fp, tok->tt.attr32.uid, oflags); close_attr(fp); open_attr(fp, "gid"); - print_group(fp, tok->tt.attr32.gid, raw); + print_group(fp, tok->tt.attr32.gid, oflags); close_attr(fp); open_attr(fp, "fsid"); print_4_bytes(fp, tok->tt.attr32.fsid, "%u"); @@ -1673,9 +1718,9 @@ print_attr32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, print_delim(fp, del); print_4_bytes(fp, tok->tt.attr32.mode, "%o"); print_delim(fp, del); - print_user(fp, tok->tt.attr32.uid, raw); + print_user(fp, tok->tt.attr32.uid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.attr32.gid, raw); + print_group(fp, tok->tt.attr32.gid, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.attr32.fsid, "%u"); print_delim(fp, del); @@ -1726,20 +1771,19 @@ fetch_attr64_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_attr64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_attr64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "attribute", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "attribute", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "mode"); print_4_bytes(fp, tok->tt.attr64.mode, "%o"); close_attr(fp); open_attr(fp, "uid"); - print_user(fp, tok->tt.attr64.uid, raw); + print_user(fp, tok->tt.attr64.uid, oflags); close_attr(fp); open_attr(fp, "gid"); - print_group(fp, tok->tt.attr64.gid, raw); + print_group(fp, tok->tt.attr64.gid, oflags); close_attr(fp); open_attr(fp, "fsid"); print_4_bytes(fp, tok->tt.attr64.fsid, "%u"); @@ -1755,9 +1799,9 @@ print_attr64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, print_delim(fp, del); print_4_bytes(fp, tok->tt.attr64.mode, "%o"); print_delim(fp, del); - print_user(fp, tok->tt.attr64.uid, raw); + print_user(fp, tok->tt.attr64.uid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.attr64.gid, raw); + print_group(fp, tok->tt.attr64.gid, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.attr64.fsid, "%u"); print_delim(fp, del); @@ -1788,12 +1832,11 @@ fetch_exit_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_exit_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_exit_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "exit", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "exit", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "errval"); print_errval(fp, tok->tt.exit.status); close_attr(fp); @@ -1846,16 +1889,15 @@ fetch_execarg_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_execarg_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_execarg_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { u_int32_t i; - print_tok_type(fp, tok->id, "exec arg", raw, xml); + print_tok_type(fp, tok->id, "exec arg", oflags); for (i = 0; i < tok->tt.execarg.count; i++) { - if (xml) { + if (oflags & AU_OFLAG_XML) { fprintf(fp, "<arg>"); - print_string(fp, tok->tt.execarg.text[i], + print_xml_string(fp, tok->tt.execarg.text[i], strlen(tok->tt.execarg.text[i])); fprintf(fp, "</arg>"); } else { @@ -1864,7 +1906,7 @@ print_execarg_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, strlen(tok->tt.execarg.text[i])); } } - if (xml) + if (oflags & AU_OFLAG_XML) close_tag(fp, tok->id); } @@ -1905,16 +1947,15 @@ fetch_execenv_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_execenv_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_execenv_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { u_int32_t i; - print_tok_type(fp, tok->id, "exec env", raw, xml); + print_tok_type(fp, tok->id, "exec env", oflags); for (i = 0; i< tok->tt.execenv.count; i++) { - if (xml) { + if (oflags & AU_OFLAG_XML) { fprintf(fp, "<env>"); - print_string(fp, tok->tt.execenv.text[i], + print_xml_string(fp, tok->tt.execenv.text[i], strlen(tok->tt.execenv.text[i])); fprintf(fp, "</env>"); } else { @@ -1923,7 +1964,7 @@ print_execenv_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, strlen(tok->tt.execenv.text[i])); } } - if (xml) + if (oflags & AU_OFLAG_XML) close_tag(fp, tok->id); } @@ -1959,26 +2000,25 @@ fetch_file_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_file_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_file_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "file", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "file", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "time"); - print_sec32(fp, tok->tt.file.s, raw); + print_sec32(fp, tok->tt.file.s, oflags); close_attr(fp); open_attr(fp, "msec"); - print_msec32(fp, tok->tt.file.ms, raw); + print_msec32(fp, tok->tt.file.ms, oflags); close_attr(fp); fprintf(fp, ">"); print_string(fp, tok->tt.file.name, tok->tt.file.len); close_tag(fp, tok->id); } else { print_delim(fp, del); - print_sec32(fp, tok->tt.file.s, raw); + print_sec32(fp, tok->tt.file.s, oflags); print_delim(fp, del); - print_msec32(fp, tok->tt.file.ms, raw); + print_msec32(fp, tok->tt.file.ms, oflags); print_delim(fp, del); print_string(fp, tok->tt.file.name, tok->tt.file.len); } @@ -2001,29 +2041,28 @@ fetch_newgroups_tok(tokenstr_t *tok, u_char *buf, int len) for (i = 0; i<tok->tt.grps.no; i++) { READ_TOKEN_U_INT32(buf, len, tok->tt.grps.list[i], tok->len, err); - if (err) - return (-1); + if (err) + return (-1); } return (0); } static void -print_newgroups_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_newgroups_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { int i; - print_tok_type(fp, tok->id, "group", raw, xml); + print_tok_type(fp, tok->id, "group", oflags); for (i = 0; i < tok->tt.grps.no; i++) { - if (xml) { + if (oflags & AU_OFLAG_XML) { fprintf(fp, "<gid>"); - print_group(fp, tok->tt.grps.list[i], raw); + print_group(fp, tok->tt.grps.list[i], oflags); fprintf(fp, "</gid>"); close_tag(fp, tok->id); } else { print_delim(fp, del); - print_group(fp, tok->tt.grps.list[i], raw); + print_group(fp, tok->tt.grps.list[i], oflags); } } } @@ -2046,12 +2085,11 @@ fetch_inaddr_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_inaddr_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_inaddr_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "ip addr", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "ip addr", oflags); + if (oflags & AU_OFLAG_XML) { print_ip_address(fp, tok->tt.inaddr.addr); close_tag(fp, tok->id); } else { @@ -2061,7 +2099,7 @@ print_inaddr_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, } /* - * type 4 bytes + * type 4 bytes * address 16 bytes */ static int @@ -2090,12 +2128,11 @@ fetch_inaddr_ex_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_inaddr_ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_inaddr_ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "ip addr ex", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "ip addr ex", oflags); + if (oflags & AU_OFLAG_XML) { print_ip_ex_address(fp, tok->tt.inaddr_ex.type, tok->tt.inaddr_ex.addr); close_tag(fp, tok->id); @@ -2164,12 +2201,11 @@ fetch_ip_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_ip_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_ip_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "ip", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "ip", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "version"); print_mem(fp, (u_char *)(&tok->tt.ip.version), sizeof(u_char)); @@ -2248,14 +2284,13 @@ fetch_ipc_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_ipc_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_ipc_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "IPC", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "IPC", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "ipc-type"); - print_ipctype(fp, tok->tt.ipc.type, raw); + print_ipctype(fp, tok->tt.ipc.type, oflags); close_attr(fp); open_attr(fp, "ipc-id"); print_4_bytes(fp, tok->tt.ipc.id, "%u"); @@ -2263,7 +2298,7 @@ print_ipc_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_ipctype(fp, tok->tt.ipc.type, raw); + print_ipctype(fp, tok->tt.ipc.type, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.ipc.id, "%u"); } @@ -2315,23 +2350,22 @@ fetch_ipcperm_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_ipcperm_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_ipcperm_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "IPC perm", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "IPC perm", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "uid"); - print_user(fp, tok->tt.ipcperm.uid, raw); + print_user(fp, tok->tt.ipcperm.uid, oflags); close_attr(fp); open_attr(fp, "gid"); - print_group(fp, tok->tt.ipcperm.gid, raw); + print_group(fp, tok->tt.ipcperm.gid, oflags); close_attr(fp); open_attr(fp, "creator-uid"); - print_user(fp, tok->tt.ipcperm.puid, raw); + print_user(fp, tok->tt.ipcperm.puid, oflags); close_attr(fp); open_attr(fp, "creator-gid"); - print_group(fp, tok->tt.ipcperm.pgid, raw); + print_group(fp, tok->tt.ipcperm.pgid, oflags); close_attr(fp); open_attr(fp, "mode"); print_4_bytes(fp, tok->tt.ipcperm.mode, "%o"); @@ -2345,13 +2379,13 @@ print_ipcperm_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_user(fp, tok->tt.ipcperm.uid, raw); + print_user(fp, tok->tt.ipcperm.uid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.ipcperm.gid, raw); + print_group(fp, tok->tt.ipcperm.gid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.ipcperm.puid, raw); + print_user(fp, tok->tt.ipcperm.puid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.ipcperm.pgid, raw); + print_group(fp, tok->tt.ipcperm.pgid, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.ipcperm.mode, "%o"); print_delim(fp, del); @@ -2378,12 +2412,11 @@ fetch_iport_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_iport_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_iport_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "ip port", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "ip port", oflags); + if (oflags & AU_OFLAG_XML) { print_2_bytes(fp, ntohs(tok->tt.iport.port), "%#x"); close_tag(fp, tok->id); } else { @@ -2414,12 +2447,11 @@ fetch_opaque_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_opaque_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_opaque_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "opaque", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "opaque", oflags); + if (oflags & AU_OFLAG_XML) { print_mem(fp, (u_char*)tok->tt.opaque.data, tok->tt.opaque.size); close_tag(fp, tok->id); @@ -2454,12 +2486,11 @@ fetch_path_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_path_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_path_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "path", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "path", oflags); + if (oflags & AU_OFLAG_XML) { print_string(fp, tok->tt.path.path, tok->tt.path.len); close_tag(fp, tok->id); } else { @@ -2527,26 +2558,25 @@ fetch_process32_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_process32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_process32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "process", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "process", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "audit-uid"); - print_user(fp, tok->tt.proc32.auid, raw); + print_user(fp, tok->tt.proc32.auid, oflags); close_attr(fp); open_attr(fp, "uid"); - print_user(fp, tok->tt.proc32.euid, raw); + print_user(fp, tok->tt.proc32.euid, oflags); close_attr(fp); open_attr(fp, "gid"); - print_group(fp, tok->tt.proc32.egid, raw); + print_group(fp, tok->tt.proc32.egid, oflags); close_attr(fp); open_attr(fp, "ruid"); - print_user(fp, tok->tt.proc32.ruid, raw); + print_user(fp, tok->tt.proc32.ruid, oflags); close_attr(fp); open_attr(fp, "rgid"); - print_group(fp, tok->tt.proc32.rgid, raw); + print_group(fp, tok->tt.proc32.rgid, oflags); close_attr(fp); open_attr(fp, "pid"); print_4_bytes(fp, tok->tt.proc32.pid, "%u"); @@ -2561,15 +2591,15 @@ print_process32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_user(fp, tok->tt.proc32.auid, raw); + print_user(fp, tok->tt.proc32.auid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.proc32.euid, raw); + print_user(fp, tok->tt.proc32.euid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.proc32.egid, raw); + print_group(fp, tok->tt.proc32.egid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.proc32.ruid, raw); + print_user(fp, tok->tt.proc32.ruid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.proc32.rgid, raw); + print_group(fp, tok->tt.proc32.rgid, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.proc32.pid, "%u"); print_delim(fp, del); @@ -2640,25 +2670,24 @@ fetch_process64_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_process64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_process64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "process", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "process", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "audit-uid"); - print_user(fp, tok->tt.proc64.auid, raw); + print_user(fp, tok->tt.proc64.auid, oflags); close_attr(fp); open_attr(fp, "uid"); - print_user(fp, tok->tt.proc64.euid, raw); + print_user(fp, tok->tt.proc64.euid, oflags); close_attr(fp); open_attr(fp, "gid"); - print_group(fp, tok->tt.proc64.egid, raw); + print_group(fp, tok->tt.proc64.egid, oflags); close_attr(fp); open_attr(fp, "ruid"); - print_user(fp, tok->tt.proc64.ruid, raw); + print_user(fp, tok->tt.proc64.ruid, oflags); close_attr(fp); open_attr(fp, "rgid"); - print_group(fp, tok->tt.proc64.rgid, raw); + print_group(fp, tok->tt.proc64.rgid, oflags); close_attr(fp); open_attr(fp, "pid"); print_4_bytes(fp, tok->tt.proc64.pid, "%u"); @@ -2673,15 +2702,15 @@ print_process64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_user(fp, tok->tt.proc64.auid, raw); + print_user(fp, tok->tt.proc64.auid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.proc64.euid, raw); + print_user(fp, tok->tt.proc64.euid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.proc64.egid, raw); + print_group(fp, tok->tt.proc64.egid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.proc64.ruid, raw); + print_user(fp, tok->tt.proc64.ruid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.proc64.rgid, raw); + print_group(fp, tok->tt.proc64.rgid, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.proc64.pid, "%u"); print_delim(fp, del); @@ -2767,26 +2796,25 @@ fetch_process32ex_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_process32ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_process32ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "process_ex", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "process_ex", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "audit-uid"); - print_user(fp, tok->tt.proc32_ex.auid, raw); + print_user(fp, tok->tt.proc32_ex.auid, oflags); close_attr(fp); open_attr(fp, "uid"); - print_user(fp, tok->tt.proc32_ex.euid, raw); + print_user(fp, tok->tt.proc32_ex.euid, oflags); close_attr(fp); open_attr(fp, "gid"); - print_group(fp, tok->tt.proc32_ex.egid, raw); + print_group(fp, tok->tt.proc32_ex.egid, oflags); close_attr(fp); open_attr(fp, "ruid"); - print_user(fp, tok->tt.proc32_ex.ruid, raw); + print_user(fp, tok->tt.proc32_ex.ruid, oflags); close_attr(fp); open_attr(fp, "rgid"); - print_group(fp, tok->tt.proc32_ex.rgid, raw); + print_group(fp, tok->tt.proc32_ex.rgid, oflags); close_attr(fp); open_attr(fp, "pid"); print_4_bytes(fp, tok->tt.proc32_ex.pid, "%u"); @@ -2802,15 +2830,15 @@ print_process32ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_user(fp, tok->tt.proc32_ex.auid, raw); + print_user(fp, tok->tt.proc32_ex.auid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.proc32_ex.euid, raw); + print_user(fp, tok->tt.proc32_ex.euid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.proc32_ex.egid, raw); + print_group(fp, tok->tt.proc32_ex.egid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.proc32_ex.ruid, raw); + print_user(fp, tok->tt.proc32_ex.ruid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.proc32_ex.rgid, raw); + print_group(fp, tok->tt.proc32_ex.rgid, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.proc32_ex.pid, "%u"); print_delim(fp, del); @@ -2897,25 +2925,24 @@ fetch_process64ex_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_process64ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_process64ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "process_ex", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "process_ex", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "audit-uid"); - print_user(fp, tok->tt.proc64_ex.auid, raw); + print_user(fp, tok->tt.proc64_ex.auid, oflags); close_attr(fp); open_attr(fp, "uid"); - print_user(fp, tok->tt.proc64_ex.euid, raw); + print_user(fp, tok->tt.proc64_ex.euid, oflags); close_attr(fp); open_attr(fp, "gid"); - print_group(fp, tok->tt.proc64_ex.egid, raw); + print_group(fp, tok->tt.proc64_ex.egid, oflags); close_attr(fp); open_attr(fp, "ruid"); - print_user(fp, tok->tt.proc64_ex.ruid, raw); + print_user(fp, tok->tt.proc64_ex.ruid, oflags); close_attr(fp); open_attr(fp, "rgid"); - print_group(fp, tok->tt.proc64_ex.rgid, raw); + print_group(fp, tok->tt.proc64_ex.rgid, oflags); close_attr(fp); open_attr(fp, "pid"); print_4_bytes(fp, tok->tt.proc64_ex.pid, "%u"); @@ -2931,15 +2958,15 @@ print_process64ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_user(fp, tok->tt.proc64_ex.auid, raw); + print_user(fp, tok->tt.proc64_ex.auid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.proc64_ex.euid, raw); + print_user(fp, tok->tt.proc64_ex.euid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.proc64_ex.egid, raw); + print_group(fp, tok->tt.proc64_ex.egid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.proc64_ex.ruid, raw); + print_user(fp, tok->tt.proc64_ex.ruid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.proc64_ex.rgid, raw); + print_group(fp, tok->tt.proc64_ex.rgid, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.proc64_ex.pid, "%u"); print_delim(fp, del); @@ -2973,14 +3000,13 @@ fetch_return32_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_return32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_return32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "return", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "return", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp ,"errval"); - print_retval(fp, tok->tt.ret32.status, raw); + print_retval(fp, tok->tt.ret32.status, oflags); close_attr(fp); open_attr(fp, "retval"); print_4_bytes(fp, tok->tt.ret32.ret, "%u"); @@ -2988,7 +3014,7 @@ print_return32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_retval(fp, tok->tt.ret32.status, raw); + print_retval(fp, tok->tt.ret32.status, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.ret32.ret, "%u"); } @@ -3011,14 +3037,13 @@ fetch_return64_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_return64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_return64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "return", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "return", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "errval"); - print_retval(fp, tok->tt.ret64.err, raw); + print_retval(fp, tok->tt.ret64.err, oflags); close_attr(fp); open_attr(fp, "retval"); print_8_bytes(fp, tok->tt.ret64.val, "%lld"); @@ -3026,7 +3051,7 @@ print_return64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_retval(fp, tok->tt.ret64.err, raw); + print_retval(fp, tok->tt.ret64.err, oflags); print_delim(fp, del); print_8_bytes(fp, tok->tt.ret64.val, "%lld"); } @@ -3048,12 +3073,11 @@ fetch_seq_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_seq_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_seq_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "sequence", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "sequence", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "seq-num"); print_4_bytes(fp, tok->tt.seq.seqno, "%u"); close_attr(fp); @@ -3093,12 +3117,11 @@ fetch_sock_inet32_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_sock_inet32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_sock_inet32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "socket-inet", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "socket-inet", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "type"); print_2_bytes(fp, tok->tt.sockinet_ex32.family, "%u"); close_attr(fp); @@ -3148,12 +3171,11 @@ fetch_sock_inet128_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_sock_inet128_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_sock_inet128_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "socket-inet6", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "socket-inet6", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "type"); print_2_bytes(fp, tok->tt.sockinet_ex32.family, "%u"); close_attr(fp); @@ -3192,7 +3214,7 @@ fetch_sock_unix_tok(tokenstr_t *tok, u_char *buf, int len) /* slen = strnlen((buf + tok->len), 104) + 1; */ p = (u_char *)memchr((const void *)(buf + tok->len), '\0', 104); - slen = (p ? (int)(p - (buf + tok->len)) : 104) + 1; + slen = (p ? (int)(p - (buf + tok->len)) : 104) + 1; READ_TOKEN_BYTES(buf, len, tok->tt.sockunix.path, slen, tok->len, err); if (err) @@ -3202,12 +3224,11 @@ fetch_sock_unix_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_sock_unix_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_sock_unix_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "socket-unix", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "socket-unix", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "type"); print_2_bytes(fp, tok->tt.sockunix.family, "%u"); close_attr(fp); @@ -3267,12 +3288,11 @@ fetch_socket_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_socket_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_socket_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "socket", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "socket", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "sock_type"); print_2_bytes(fp, tok->tt.socket.type, "%u"); close_attr(fp); @@ -3361,26 +3381,25 @@ fetch_subject32_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_subject32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_subject32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "subject", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "subject", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "audit-uid"); - print_user(fp, tok->tt.subj32.auid, raw); + print_user(fp, tok->tt.subj32.auid, oflags); close_attr(fp); open_attr(fp, "uid"); - print_user(fp, tok->tt.subj32.euid, raw); + print_user(fp, tok->tt.subj32.euid, oflags); close_attr(fp); open_attr(fp, "gid"); - print_group(fp, tok->tt.subj32.egid, raw); + print_group(fp, tok->tt.subj32.egid, oflags); close_attr(fp); open_attr(fp, "ruid"); - print_user(fp, tok->tt.subj32.ruid, raw); + print_user(fp, tok->tt.subj32.ruid, oflags); close_attr(fp); open_attr(fp, "rgid"); - print_group(fp, tok->tt.subj32.rgid, raw); + print_group(fp, tok->tt.subj32.rgid, oflags); close_attr(fp); open_attr(fp,"pid"); print_4_bytes(fp, tok->tt.subj32.pid, "%u"); @@ -3395,15 +3414,15 @@ print_subject32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_user(fp, tok->tt.subj32.auid, raw); + print_user(fp, tok->tt.subj32.auid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.subj32.euid, raw); + print_user(fp, tok->tt.subj32.euid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.subj32.egid, raw); + print_group(fp, tok->tt.subj32.egid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.subj32.ruid, raw); + print_user(fp, tok->tt.subj32.ruid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.subj32.rgid, raw); + print_group(fp, tok->tt.subj32.rgid, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.subj32.pid, "%u"); print_delim(fp, del); @@ -3415,6 +3434,110 @@ print_subject32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, } } +static void +print_upriv_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) +{ + + print_tok_type(fp, tok->id, "use of privilege", oflags); + if (oflags & AU_OFLAG_XML) { + open_attr(fp, "status"); + if (tok->tt.priv.sorf) + (void) fprintf(fp, "successful use of priv"); + else + (void) fprintf(fp, "failed use of priv"); + close_attr(fp); + open_attr(fp, "name"); + print_string(fp, tok->tt.priv.priv, tok->tt.priv.privstrlen); + close_attr(fp); + close_tag(fp, tok->id); + } else { + print_delim(fp, del); + if (tok->tt.priv.sorf) + (void) fprintf(fp, "successful use of priv"); + else + (void) fprintf(fp, "failed use of priv"); + print_delim(fp, del); + print_string(fp, tok->tt.priv.priv, tok->tt.priv.privstrlen); + } +} + +/* + * status 1 byte + * privstrlen 2 bytes + * priv N bytes + 1 (\0 byte) + */ +static int +fetch_priv_tok(tokenstr_t *tok, u_char *buf, int len) +{ + int err = 0; + + READ_TOKEN_U_CHAR(buf, len, tok->tt.priv.sorf, tok->len, err); + if (err) + return (-1); + READ_TOKEN_U_INT16(buf, len, tok->tt.priv.privstrlen, tok->len, err); + if (err) + return (-1); + SET_PTR((char *)buf, len, tok->tt.priv.priv, tok->tt.priv.privstrlen, + tok->len, err); + if (err) + return (-1); + return (0); +} + +/* + * privtstrlen 1 byte + * privtstr N bytes + 1 + * privstrlen 1 byte + * privstr N bytes + 1 + */ +static int +fetch_privset_tok(tokenstr_t *tok, u_char *buf, int len) +{ + int err = 0; + + READ_TOKEN_U_INT16(buf, len, tok->tt.privset.privtstrlen, + tok->len, err); + if (err) + return (-1); + SET_PTR((char *)buf, len, tok->tt.privset.privtstr, + tok->tt.privset.privtstrlen, tok->len, err); + if (err) + return (-1); + READ_TOKEN_U_INT16(buf, len, tok->tt.privset.privstrlen, + tok->len, err); + if (err) + return (-1); + SET_PTR((char *)buf, len, tok->tt.privset.privstr, + tok->tt.privset.privstrlen, tok->len, err); + if (err) + return (-1); + return (0); +} + +static void +print_privset_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) +{ + + print_tok_type(fp, tok->id, "privilege", oflags); + if (oflags & AU_OFLAG_XML) { + open_attr(fp, "type"); + print_string(fp, tok->tt.privset.privtstr, + tok->tt.privset.privtstrlen); + close_attr(fp); + open_attr(fp, "priv"); + print_string(fp, tok->tt.privset.privstr, + tok->tt.privset.privstrlen); + close_attr(fp); + } else { + print_delim(fp, del); + print_string(fp, tok->tt.privset.privtstr, + tok->tt.privset.privtstrlen); + print_delim(fp, del); + print_string(fp, tok->tt.privset.privstr, + tok->tt.privset.privstrlen); + } +} + /* * audit ID 4 bytes * euid 4 bytes @@ -3473,26 +3596,25 @@ fetch_subject64_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_subject64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_subject64_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "subject", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "subject", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "audit-uid"); - print_user(fp, tok->tt.subj64.auid, raw); + print_user(fp, tok->tt.subj64.auid, oflags); close_attr(fp); open_attr(fp, "uid"); - print_user(fp, tok->tt.subj64.euid, raw); + print_user(fp, tok->tt.subj64.euid, oflags); close_attr(fp); open_attr(fp, "gid"); - print_group(fp, tok->tt.subj64.egid, raw); + print_group(fp, tok->tt.subj64.egid, oflags); close_attr(fp); open_attr(fp, "ruid"); - print_user(fp, tok->tt.subj64.ruid, raw); + print_user(fp, tok->tt.subj64.ruid, oflags); close_attr(fp); open_attr(fp, "rgid"); - print_group(fp, tok->tt.subj64.rgid, raw); + print_group(fp, tok->tt.subj64.rgid, oflags); close_attr(fp); open_attr(fp, "pid"); print_4_bytes(fp, tok->tt.subj64.pid, "%u"); @@ -3507,15 +3629,15 @@ print_subject64_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_user(fp, tok->tt.subj64.auid, raw); + print_user(fp, tok->tt.subj64.auid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.subj64.euid, raw); + print_user(fp, tok->tt.subj64.euid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.subj64.egid, raw); + print_group(fp, tok->tt.subj64.egid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.subj64.ruid, raw); + print_user(fp, tok->tt.subj64.ruid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.subj64.rgid, raw); + print_group(fp, tok->tt.subj64.rgid, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.subj64.pid, "%u"); print_delim(fp, del); @@ -3600,26 +3722,25 @@ fetch_subject32ex_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_subject32ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_subject32ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "subject_ex", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "subject_ex", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "audit-uid"); - print_user(fp, tok->tt.subj32_ex.auid, raw); + print_user(fp, tok->tt.subj32_ex.auid, oflags); close_attr(fp); open_attr(fp, "uid"); - print_user(fp, tok->tt.subj32_ex.euid, raw); + print_user(fp, tok->tt.subj32_ex.euid, oflags); close_attr(fp); open_attr(fp, "gid"); - print_group(fp, tok->tt.subj32_ex.egid, raw); + print_group(fp, tok->tt.subj32_ex.egid, oflags); close_attr(fp); open_attr(fp, "ruid"); - print_user(fp, tok->tt.subj32_ex.ruid, raw); + print_user(fp, tok->tt.subj32_ex.ruid, oflags); close_attr(fp); open_attr(fp, "rgid"); - print_group(fp, tok->tt.subj32_ex.rgid, raw); + print_group(fp, tok->tt.subj32_ex.rgid, oflags); close_attr(fp); open_attr(fp, "pid"); print_4_bytes(fp, tok->tt.subj32_ex.pid, "%u"); @@ -3635,15 +3756,15 @@ print_subject32ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_user(fp, tok->tt.subj32_ex.auid, raw); + print_user(fp, tok->tt.subj32_ex.auid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.subj32_ex.euid, raw); + print_user(fp, tok->tt.subj32_ex.euid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.subj32_ex.egid, raw); + print_group(fp, tok->tt.subj32_ex.egid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.subj32_ex.ruid, raw); + print_user(fp, tok->tt.subj32_ex.ruid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.subj32_ex.rgid, raw); + print_group(fp, tok->tt.subj32_ex.rgid, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.subj32_ex.pid, "%u"); print_delim(fp, del); @@ -3729,25 +3850,24 @@ fetch_subject64ex_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_subject64ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_subject64ex_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "subject_ex", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "subject_ex", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "audit-uid"); - print_user(fp, tok->tt.subj64_ex.auid, raw); + print_user(fp, tok->tt.subj64_ex.auid, oflags); close_attr(fp); open_attr(fp, "uid"); - print_user(fp, tok->tt.subj64_ex.euid, raw); + print_user(fp, tok->tt.subj64_ex.euid, oflags); close_attr(fp); open_attr(fp, "gid"); - print_group(fp, tok->tt.subj64_ex.egid, raw); + print_group(fp, tok->tt.subj64_ex.egid, oflags); close_attr(fp); open_attr(fp, "ruid"); - print_user(fp, tok->tt.subj64_ex.ruid, raw); + print_user(fp, tok->tt.subj64_ex.ruid, oflags); close_attr(fp); open_attr(fp, "rgid"); - print_group(fp, tok->tt.subj64_ex.rgid, raw); + print_group(fp, tok->tt.subj64_ex.rgid, oflags); close_attr(fp); open_attr(fp, "pid"); print_4_bytes(fp, tok->tt.subj64_ex.pid, "%u"); @@ -3763,15 +3883,15 @@ print_subject64ex_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, close_tag(fp, tok->id); } else { print_delim(fp, del); - print_user(fp, tok->tt.subj64_ex.auid, raw); + print_user(fp, tok->tt.subj64_ex.auid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.subj64_ex.euid, raw); + print_user(fp, tok->tt.subj64_ex.euid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.subj64_ex.egid, raw); + print_group(fp, tok->tt.subj64_ex.egid, oflags); print_delim(fp, del); - print_user(fp, tok->tt.subj64_ex.ruid, raw); + print_user(fp, tok->tt.subj64_ex.ruid, oflags); print_delim(fp, del); - print_group(fp, tok->tt.subj64_ex.rgid, raw); + print_group(fp, tok->tt.subj64_ex.rgid, oflags); print_delim(fp, del); print_4_bytes(fp, tok->tt.subj64_ex.pid, "%u"); print_delim(fp, del); @@ -3806,12 +3926,11 @@ fetch_text_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_text_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_text_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "text", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "text", oflags); + if (oflags & AU_OFLAG_XML) { print_string(fp, tok->tt.text.text, tok->tt.text.len); close_tag(fp, tok->id); } else { @@ -3891,8 +4010,7 @@ fetch_socketex32_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_socketex32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_socketex32_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { /* @@ -3901,8 +4019,8 @@ print_socketex32_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, * these constants in the future, we may want to call conversion * routines. */ - print_tok_type(fp, tok->id, "socket", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "socket", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "sock_dom"); print_2_bytes(fp, tok->tt.socket_ex32.domain, "%#x"); close_attr(fp); @@ -3963,12 +4081,11 @@ fetch_invalid_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_invalid_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_invalid_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - if (!xml) { - print_tok_type(fp, tok->id, "unknown", raw, 0); + if (!(oflags & AU_OFLAG_XML)) { + print_tok_type(fp, tok->id, "unknown", oflags); print_delim(fp, del); print_mem(fp, (u_char*)tok->tt.invalid.data, tok->tt.invalid.length); @@ -3996,12 +4113,11 @@ fetch_zonename_tok(tokenstr_t *tok, u_char *buf, int len) } static void -print_zonename_tok(FILE *fp, tokenstr_t *tok, char *del, char raw, - __unused char sfrm, int xml) +print_zonename_tok(FILE *fp, tokenstr_t *tok, char *del, int oflags) { - print_tok_type(fp, tok->id, "zone", raw, xml); - if (xml) { + print_tok_type(fp, tok->id, "zone", oflags); + if (oflags & AU_OFLAG_XML) { open_attr(fp, "name"); print_string(fp, tok->tt.zonename.zonename, tok->tt.zonename.len); @@ -4152,360 +4268,230 @@ au_fetch_tok(tokenstr_t *tok, u_char *buf, int len) case AUT_ZONENAME: return (fetch_zonename_tok(tok, buf, len)); + case AUT_UPRIV: + return (fetch_priv_tok(tok, buf, len)); + + case AUT_PRIV: + return (fetch_privset_tok(tok, buf, len)); + default: return (fetch_invalid_tok(tok, buf, len)); } } -/* - * 'prints' the token out to outfp. - */ void -au_print_tok(FILE *outfp, tokenstr_t *tok, char *del, char raw, char sfrm) +au_print_flags_tok(FILE *outfp, tokenstr_t *tok, char *del, int oflags) { switch(tok->id) { case AUT_HEADER32: - print_header32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_header32_tok(outfp, tok, del, oflags); return; case AUT_HEADER32_EX: - print_header32_ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_header32_ex_tok(outfp, tok, del, oflags); return; case AUT_HEADER64: - print_header64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_header64_tok(outfp, tok, del, oflags); return; case AUT_HEADER64_EX: - print_header64_ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_header64_ex_tok(outfp, tok, del, oflags); return; case AUT_TRAILER: - print_trailer_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_trailer_tok(outfp, tok, del, oflags); return; case AUT_ARG32: - print_arg32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_arg32_tok(outfp, tok, del, oflags); return; case AUT_ARG64: - print_arg64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_arg64_tok(outfp, tok, del, oflags); return; case AUT_DATA: - print_arb_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_arb_tok(outfp, tok, del, oflags); return; case AUT_ATTR32: - print_attr32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_attr32_tok(outfp, tok, del, oflags); return; case AUT_ATTR64: - print_attr64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_attr64_tok(outfp, tok, del, oflags); return; case AUT_EXIT: - print_exit_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_exit_tok(outfp, tok, del, oflags); return; case AUT_EXEC_ARGS: - print_execarg_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_execarg_tok(outfp, tok, del, oflags); return; case AUT_EXEC_ENV: - print_execenv_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_execenv_tok(outfp, tok, del, oflags); return; case AUT_OTHER_FILE32: - print_file_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_file_tok(outfp, tok, del, oflags); return; case AUT_NEWGROUPS: - print_newgroups_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_newgroups_tok(outfp, tok, del, oflags); return; case AUT_IN_ADDR: - print_inaddr_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_inaddr_tok(outfp, tok, del, oflags); return; case AUT_IN_ADDR_EX: - print_inaddr_ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_inaddr_ex_tok(outfp, tok, del, oflags); return; case AUT_IP: - print_ip_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_ip_tok(outfp, tok, del, oflags); return; case AUT_IPC: - print_ipc_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_ipc_tok(outfp, tok, del, oflags); return; case AUT_IPC_PERM: - print_ipcperm_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_ipcperm_tok(outfp, tok, del, oflags); return; case AUT_IPORT: - print_iport_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_iport_tok(outfp, tok, del, oflags); return; case AUT_OPAQUE: - print_opaque_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_opaque_tok(outfp, tok, del, oflags); return; case AUT_PATH: - print_path_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_path_tok(outfp, tok, del, oflags); return; case AUT_PROCESS32: - print_process32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_process32_tok(outfp, tok, del, oflags); return; case AUT_PROCESS32_EX: - print_process32ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_process32ex_tok(outfp, tok, del, oflags); return; case AUT_PROCESS64: - print_process64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_process64_tok(outfp, tok, del, oflags); return; case AUT_PROCESS64_EX: - print_process64ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_process64ex_tok(outfp, tok, del, oflags); return; case AUT_RETURN32: - print_return32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_return32_tok(outfp, tok, del, oflags); return; case AUT_RETURN64: - print_return64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_return64_tok(outfp, tok, del, oflags); return; case AUT_SEQ: - print_seq_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_seq_tok(outfp, tok, del, oflags); return; case AUT_SOCKET: - print_socket_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_socket_tok(outfp, tok, del, oflags); return; case AUT_SOCKINET32: - print_sock_inet32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_sock_inet32_tok(outfp, tok, del, oflags); return; case AUT_SOCKUNIX: - print_sock_unix_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_sock_unix_tok(outfp, tok, del, oflags); return; case AUT_SOCKINET128: - print_sock_inet128_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_sock_inet128_tok(outfp, tok, del, oflags); return; case AUT_SUBJECT32: - print_subject32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_subject32_tok(outfp, tok, del, oflags); return; case AUT_SUBJECT64: - print_subject64_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_subject64_tok(outfp, tok, del, oflags); return; case AUT_SUBJECT32_EX: - print_subject32ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_subject32ex_tok(outfp, tok, del, oflags); return; case AUT_SUBJECT64_EX: - print_subject64ex_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_subject64ex_tok(outfp, tok, del, oflags); return; case AUT_TEXT: - print_text_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_text_tok(outfp, tok, del, oflags); return; case AUT_SOCKET_EX: - print_socketex32_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_socketex32_tok(outfp, tok, del, oflags); return; case AUT_ZONENAME: - print_zonename_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_zonename_tok(outfp, tok, del, oflags); + return; + + case AUT_UPRIV: + print_upriv_tok(outfp, tok, del, oflags); + return; + + case AUT_PRIV: + print_privset_tok(outfp, tok, del, oflags); return; default: - print_invalid_tok(outfp, tok, del, raw, sfrm, AU_PLAIN); + print_invalid_tok(outfp, tok, del, oflags); } } /* - * 'prints' the token out to outfp in XML format. + * 'prints' the token out to outfp. */ void -au_print_tok_xml(FILE *outfp, tokenstr_t *tok, char *del, char raw, - char sfrm) +au_print_tok(FILE *outfp, tokenstr_t *tok, char *del, char raw, char sfrm) { + int oflags = AU_OFLAG_NONE; - switch(tok->id) { - case AUT_HEADER32: - print_header32_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_HEADER32_EX: - print_header32_ex_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_HEADER64: - print_header64_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_HEADER64_EX: - print_header64_ex_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_TRAILER: - print_trailer_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_ARG32: - print_arg32_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_ARG64: - print_arg64_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_DATA: - print_arb_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_ATTR32: - print_attr32_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_ATTR64: - print_attr64_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_EXIT: - print_exit_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_EXEC_ARGS: - print_execarg_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_EXEC_ENV: - print_execenv_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_OTHER_FILE32: - print_file_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_NEWGROUPS: - print_newgroups_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_IN_ADDR: - print_inaddr_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_IN_ADDR_EX: - print_inaddr_ex_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_IP: - print_ip_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_IPC: - print_ipc_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_IPC_PERM: - print_ipcperm_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_IPORT: - print_iport_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_OPAQUE: - print_opaque_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_PATH: - print_path_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_PROCESS32: - print_process32_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_PROCESS32_EX: - print_process32ex_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_PROCESS64: - print_process64_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_PROCESS64_EX: - print_process64ex_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_RETURN32: - print_return32_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_RETURN64: - print_return64_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_SEQ: - print_seq_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_SOCKET: - print_socket_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_SOCKINET32: - print_sock_inet32_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_SOCKUNIX: - print_sock_unix_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_SUBJECT32: - print_subject32_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_SUBJECT64: - print_subject64_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_SUBJECT32_EX: - print_subject32ex_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; - - case AUT_SUBJECT64_EX: - print_subject64ex_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; + if (raw) + oflags |= AU_OFLAG_RAW; + if (sfrm) + oflags |= AU_OFLAG_SHORT; - case AUT_TEXT: - print_text_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; + au_print_flags_tok(outfp, tok, del, oflags); +} - case AUT_SOCKET_EX: - print_socketex32_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; +/* + * 'prints' the token out to outfp in XML format. + */ +void +au_print_tok_xml(FILE *outfp, tokenstr_t *tok, char *del, char raw, + char sfrm) +{ + int oflags = AU_OFLAG_XML; - case AUT_ZONENAME: - print_zonename_tok(outfp, tok, del, raw, sfrm, AU_XML); - return; + if (raw) + oflags |= AU_OFLAG_RAW; + if (sfrm) + oflags |= AU_OFLAG_SHORT; - default: - print_invalid_tok(outfp, tok, del, raw, sfrm, AU_XML); - } + au_print_flags_tok(outfp, tok, del, oflags); } /* @@ -4553,11 +4539,10 @@ au_read_rec(FILE *fp, u_char **buf) return (-1); } - *buf = malloc(recsize * sizeof(u_char)); + *buf = calloc(recsize, sizeof(u_char)); if (*buf == NULL) return (-1); bptr = *buf; - memset(bptr, 0, recsize); /* store the token contents already read, back to the buffer*/ *bptr = type; diff --git a/libbsm/bsm_token.c b/libbsm/bsm_token.c index a37dd630c57c..a6b975d04d1b 100644 --- a/libbsm/bsm_token.c +++ b/libbsm/bsm_token.c @@ -30,26 +30,29 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_token.c#93 $ + * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_token.c#99 $ */ #include <sys/types.h> #include <config/config.h> -#if defined(HAVE_SYS_ENDIAN_H) && defined(HAVE_BE32ENC) + +#ifdef USE_ENDIAN_H +#include <endian.h> +#endif +#ifdef USE_SYS_ENDIAN_H #include <sys/endian.h> -#else /* !HAVE_SYS_ENDIAN_H || !HAVE_BE32ENC */ -#ifdef HAVE_MACHINE_ENDIAN_H +#endif +#ifdef USE_MACHINE_ENDIAN_H #include <machine/endian.h> -#else /* !HAVE_MACHINE_ENDIAN_H */ -#ifdef HAVE_ENDIAN_H -#include <endian.h> -#else /* !HAVE_ENDIAN_H */ -#error "No supported endian.h" -#endif /* !HAVE_ENDIAN_H */ -#endif /* !HAVE_MACHINE_ENDIAN_H */ +#endif +#ifdef USE_COMPAT_ENDIAN_H #include <compat/endian.h> -#endif /* !HAVE_SYS_ENDIAN_H || !HAVE_BE32ENC */ +#endif +#ifdef USE_COMPAT_ENDIAN_ENC_H +#include <compat/endian_enc.h> +#endif + #ifdef HAVE_FULL_QUEUE_H #include <sys/queue.h> #else /* !HAVE_FULL_QUEUE_H */ @@ -79,12 +82,11 @@ (t) = malloc(sizeof(token_t)); \ if ((t) != NULL) { \ (t)->len = (length); \ - (dptr) = (t->t_data) = malloc((length) * sizeof(u_char)); \ + (dptr) = (t->t_data) = calloc((length), sizeof(u_char)); \ if ((dptr) == NULL) { \ free(t); \ (t) = NULL; \ - } else \ - memset((dptr), 0, (length)); \ + } \ } else \ (dptr) = NULL; \ assert((t) == NULL || (dptr) != NULL); \ @@ -92,6 +94,59 @@ /* * token ID 1 byte + * success/failure 1 byte + * privstrlen 2 bytes + * privstr N bytes + 1 (\0 byte) + */ +token_t * +au_to_upriv(char sorf, char *priv) +{ + u_int16_t textlen; + u_char *dptr; + token_t *t; + + textlen = strlen(priv) + 1; + GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_char) + + sizeof(u_int16_t) + textlen); + if (t == NULL) + return (NULL); + ADD_U_CHAR(dptr, AUT_UPRIV); + ADD_U_CHAR(dptr, sorf); + ADD_U_INT16(dptr, textlen); + ADD_STRING(dptr, priv, textlen); + return (t); +} + +/* + * token ID 1 byte + * privtstrlen 2 bytes + * privtstr N bytes + 1 + * privstrlen 2 bytes + * privstr N bytes + 1 + */ +token_t * +au_to_privset(char *privtypestr, char *privstr) +{ + u_int16_t type_len, priv_len; + u_char *dptr; + token_t *t; + + type_len = strlen(privtypestr) + 1; + priv_len = strlen(privstr) + 1; + GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int16_t) + + sizeof(u_int16_t) + type_len + priv_len); + if (t == NULL) + return (NULL); + ADD_U_CHAR(dptr, AUT_PRIV); + ADD_U_INT16(dptr, type_len); + ADD_STRING(dptr, privtypestr, type_len); + ADD_U_INT16(dptr, priv_len); + ADD_STRING(dptr, privstr, priv_len); + return (t); +} + +/* + * token ID 1 byte * argument # 1 byte * argument value 4 bytes/8 bytes (32-bit/64-bit value) * text length 2 bytes @@ -968,6 +1023,8 @@ au_to_socket_ex(u_short so_domain, u_short so_type, errno = EINVAL; return (NULL); } + if (t == NULL) + return (NULL); ADD_U_CHAR(dptr, AUT_SOCKET_EX); ADD_U_INT16(dptr, au_domain_to_bsm(so_domain)); @@ -1285,9 +1342,9 @@ au_to_me(void) auinfo.ai_asid, &auinfo.ai_termid)); } else { /* getaudit_addr(2) failed for some other reason. */ - return (NULL); + return (NULL); } - } + } return (au_to_subject32_ex(aia.ai_auid, geteuid(), getegid(), getuid(), getgid(), getpid(), aia.ai_asid, &aia.ai_termid)); @@ -1459,7 +1516,7 @@ au_to_header32_ex_tm(int rec_size, au_event_t e_type, au_emod_t e_mod, GET_TOKEN_AREA(t, dptr, sizeof(u_char) + sizeof(u_int32_t) + sizeof(u_char) + 2 * sizeof(u_int16_t) + 3 * sizeof(u_int32_t) + tid->at_type); - if (t == NULL) + if (t == NULL) return (NULL); ADD_U_CHAR(dptr, AUT_HEADER32_EX); @@ -1478,7 +1535,7 @@ au_to_header32_ex_tm(int rec_size, au_event_t e_type, au_emod_t e_mod, ADD_U_INT32(dptr, tm.tv_sec); ADD_U_INT32(dptr, timems); /* We need time in ms. */ - return (t); + return (t); } token_t * diff --git a/libbsm/bsm_user.c b/libbsm/bsm_user.c index 005698be9a98..c7464f04b7bd 100644 --- a/libbsm/bsm_user.c +++ b/libbsm/bsm_user.c @@ -27,7 +27,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_user.c#19 $ + * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_user.c#20 $ */ #include <config/config.h> @@ -210,7 +210,7 @@ getauusernam_r(struct au_user_ent *u, const char *name) #ifdef HAVE_PTHREAD_MUTEX_LOCK pthread_mutex_unlock(&mutex); #endif - return (u); + return (up); } } diff --git a/libbsm/bsm_wrappers.c b/libbsm/bsm_wrappers.c index ab6dc17f8d6c..2d24a0ce0f69 100644 --- a/libbsm/bsm_wrappers.c +++ b/libbsm/bsm_wrappers.c @@ -26,7 +26,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_wrappers.c#31 $ + * $P4: //depot/projects/trustedbsd/openbsm/libbsm/bsm_wrappers.c#32 $ */ #ifdef __APPLE__ @@ -181,7 +181,7 @@ audit_submit(short au_event, au_id_t auid, char status, token = au_to_return32(au_errno_to_bsm(status), reterr); if (token == NULL) { syslog(LOG_AUTH | LOG_ERR, - "audit: enable to build return token"); + "audit: unable to build return token"); (void) au_close(afd, AU_TO_NO_WRITE, au_event); errno = EPERM; return (-1); diff --git a/m4/libtool.m4 b/m4/libtool.m4 new file mode 100644 index 000000000000..44e0ecff11e3 --- /dev/null +++ b/m4/libtool.m4 @@ -0,0 +1,7982 @@ +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +]) + +# serial 57 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +_LT_SETUP + +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +m4_defun([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl + +_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl +dnl +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_WITH_SYSROOT])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR + +m4_require([_LT_TAG_COMPILER])dnl + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + _LT_PATH_MAGIC + fi + ;; +esac + +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + + +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from `configure', and `config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# `config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain="$ac_aux_dir/ltmain.sh" +])# _LT_PROG_LTMAIN + + +## ------------------------------------- ## +## Accumulate code for creating libtool. ## +## ------------------------------------- ## + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the `libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + +## ------------------------ ## +## FIXME: Eliminate VARNAME ## +## ------------------------ ## + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to `config.status' so that its +# declaration there will have the same value as in `configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags="_LT_TAGS"dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# `#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test $lt_write_fail = 0 && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to <bug-libtool@gnu.org>." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2011 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test $[#] != 0 +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try \`$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try \`$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +_LT_COPYING +_LT_LIBTOOL_TAGS + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + _LT_PROG_REPLACE_SHELLFNS + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Go], [_LT_LANG(GO)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +m4_ifndef([AC_PROG_GO], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_GO. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ +m4_defun([AC_PROG_GO], +[AC_LANG_PUSH(Go)dnl +AC_ARG_VAR([GOC], [Go compiler command])dnl +AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl +_AC_ARG_VAR_LDFLAGS()dnl +AC_CHECK_TOOL(GOC, gccgo) +if test -z "$GOC"; then + if test -n "$ac_tool_prefix"; then + AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) + fi +fi +if test -z "$GOC"; then + AC_CHECK_PROG(GOC, gccgo, gccgo, false) +fi +])#m4_defun +])#m4_ifndef + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([AC_PROG_GO], + [LT_LANG(GO)], + [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS="$save_LDFLAGS" + ]) + + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[[012]]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES([TAG]) +# --------------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], + [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + m4_if([$1], [CXX], +[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) +# ---------------------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +# Store the results from the different compilers for each TAGNAME. +# Allow to override them for all tags through lt_cv_aix_libpath. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], + [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ + lt_aix_libpath_sed='[ + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }]' + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" + fi + ]) + aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) +fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script which will find a shell with a builtin +# printf (which we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +case "$ECHO" in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac + +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_WITH_SYSROOT +# ---------------- +AC_DEFUN([_LT_WITH_SYSROOT], +[AC_MSG_CHECKING([for sysroot]) +AC_ARG_WITH([sysroot], +[ --with-sysroot[=DIR] Search for dependent libraries within DIR + (or the compiler's sysroot if not specified).], +[], [with_sysroot=no]) + +dnl lt_sysroot will always be passed unquoted. We quote it here +dnl in case the user passed a directory name. +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + AC_MSG_RESULT([${with_sysroot}]) + AC_MSG_ERROR([The sysroot must be an absolute path.]) + ;; +esac + + AC_MSG_RESULT([${lt_sysroot:-no}]) +_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl +[dependent libraries, and in which our libraries should be installed.])]) + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" +])# _LT_ENABLE_LOCK + + +# _LT_PROG_AR +# ----------- +m4_defun([_LT_PROG_AR], +[AC_CHECK_TOOLS(AR, [ar], false) +: ${AR=ar} +: ${AR_FLAGS=cru} +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], + [lt_cv_ar_at_file=no + AC_COMPILE_IFELSE([AC_LANG_PROGRAM], + [echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + ]) + ]) + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi +_LT_DECL([], [archiver_list_spec], [1], + [How to feed a file listing to the archiver]) +])# _LT_PROG_AR + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[_LT_PROG_AR + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test x"[$]$2" = xyes; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include <dlfcn.h> +#endif + +#include <stdio.h> + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links="nottested" +if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || + test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[[4-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib<name>.so + # instead of lib<name>.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[23]].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], + [Run-time system search path for libraries]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program which can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program which can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in + *GNU* | *'with BFD'*) + test "$with_gnu_ld" != no && break + ;; + *) + test "$with_gnu_ld" != yes && break + ;; + esac + fi + done + IFS="$lt_save_ifs" +else + lt_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$lt_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +_LT_PATH_LD_GNU +AC_SUBST([LD]) + +_LT_TAGDECL([], [LD], [1], [The linker used to build libraries]) +])# LT_PATH_LD + +# Old names: +AU_ALIAS([AM_PROG_LD], [LT_PATH_LD]) +AU_ALIAS([AC_PROG_LD], [LT_PATH_LD]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_LD], []) +dnl AC_DEFUN([AC_PROG_LD], []) + + +# _LT_PATH_LD_GNU +#- -------------- +m4_defun([_LT_PATH_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 </dev/null` in +*GNU* | *'with BFD'*) + lt_cv_prog_gnu_ld=yes + ;; +*) + lt_cv_prog_gnu_ld=no + ;; +esac]) +with_gnu_ld=$lt_cv_prog_gnu_ld +])# _LT_PATH_LD_GNU + + +# _LT_CMD_RELOAD +# -------------- +# find reload flag for linker +# -- PORTME Some linkers may need a different reload flag. +m4_defun([_LT_CMD_RELOAD], +[AC_CACHE_CHECK([for $LD option to reload object files], + lt_cv_ld_reload_flag, + [lt_cv_ld_reload_flag='-r']) +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + if test "$GCC" != yes; then + reload_cmds=false + fi + ;; + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac +_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl +_LT_TAGDECL([], [reload_cmds], [2])dnl +])# _LT_CMD_RELOAD + + +# _LT_CHECK_MAGIC_METHOD +# ---------------------- +# how to check for library dependencies +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_MAGIC_METHOD], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +AC_CACHE_CHECK([how to recognize dependent libraries], +lt_cv_deplibs_check_method, +[lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[[4-9]]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[[45]]*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. + if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method = "file_magic"]) +_LT_DECL([], [file_magic_glob], [1], + [How to find potential files when deplibs_check_method = "file_magic"]) +_LT_DECL([], [want_nocaseglob], [1], + [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi]) +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + +# _LT_CHECK_SHAREDLIB_FROM_LINKLIB +# -------------------------------- +# how to determine the name of the shared library +# associated with a specific link library. +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +m4_require([_LT_DECL_DLLTOOL]) +AC_CACHE_CHECK([how to associate runtime and link libraries], +lt_cv_sharedlib_from_linklib_cmd, +[lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac +]) +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + +_LT_DECL([], [sharedlib_from_linklib_cmd], [1], + [Command to associate shared and link libraries]) +])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB + + +# _LT_PATH_MANIFEST_TOOL +# ---------------------- +# locate the manifest tool +m4_defun([_LT_PATH_MANIFEST_TOOL], +[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&AS_MESSAGE_LOG_FD + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest*]) +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi +_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl +])# _LT_PATH_MANIFEST_TOOL + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT@&t@_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT@&t@_DLSYM_CONST +#else +# define LT@&t@_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT@&t@_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([], [nm_file_list_spec], [1], + [Specify filename containing input files for $NM]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ F* | *Sun*Fortran*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + *Intel*\ [[CF]]*Compiler*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + *Portland\ Group*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac + +AC_CACHE_CHECK([for $compiler option to produce PIC], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + ;; + esac + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach <jrb3@best.com> says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + esac + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], + [lt_cv_irix_exported_symbol], + [save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE( + [AC_LANG_SOURCE( + [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], + [C++], [[int foo (void) { return 0; }]], + [Fortran 77], [[ + subroutine foo + end]], + [Fortran], [[ + subroutine foo + end]])])], + [lt_cv_irix_exported_symbol=yes], + [lt_cv_irix_exported_symbol=no]) + LDFLAGS="$save_LDFLAGS"]) + if test "$lt_cv_irix_exported_symbol" = yes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting ${shlibpath_var} if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [postlink_cmds], [2], + [Commands necessary for finishing linking programs]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC="$lt_save_CC" +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach <jrb3@best.com> says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + gnu*) + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + + _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_FUNC_STRIPNAME_CNF +# ---------------------- +# func_stripname_cnf prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# +# This function is identical to the (non-XSI) version of func_stripname, +# except this one can be used by m4 code that may be executed by configure, +# rather than the libtool script. +m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl +AC_REQUIRE([_LT_DECL_SED]) +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) +func_stripname_cnf () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname_cnf +])# _LT_FUNC_STRIPNAME_CNF + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF +package foo +func foo() { +} +_LT_EOF +]) + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac + +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)="$p" + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)="$p" + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_F77" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} + CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$G77" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" + CFLAGS="$lt_save_CFLAGS" +fi # test "$_lt_disable_F77" != yes + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test "$_lt_disable_FC" != yes + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +CFLAGS=$GCJFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_GO_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Go compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GO_CONFIG], +[AC_REQUIRE([LT_PROG_GO])dnl +AC_LANG_SAVE + +# Source file extension for Go test sources. +ac_ext=go + +# Object file extension for compiled Go test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="package main; func main() { }" + +# Code to be used in simple link tests +lt_simple_link_test_code='package main; func main() { }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GOC-"gccgo"} +CFLAGS=$GOFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# Go did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GO_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_GO +# ---------- +AC_DEFUN([LT_PROG_GO], +[AC_CHECK_TOOL(GOC, gccgo,) +]) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + +# _LT_DECL_DLLTOOL +# ---------------- +# Ensure DLLTOOL variable is set. +m4_defun([_LT_DECL_DLLTOOL], +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) +AC_SUBST([DLLTOOL]) +]) + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +AC_MSG_RESULT([$xsi_shell]) +_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +AC_MSG_CHECKING([whether the shell understands "+="]) +lt_shell_append=no +( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +AC_MSG_RESULT([$lt_shell_append]) +_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) +# ------------------------------------------------------ +# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and +# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. +m4_defun([_LT_PROG_FUNCTION_REPLACE], +[dnl { +sed -e '/^$1 ()$/,/^} # $1 /c\ +$1 ()\ +{\ +m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) +} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: +]) + + +# _LT_PROG_REPLACE_SHELLFNS +# ------------------------- +# Replace existing portable implementations of several shell functions with +# equivalent extended shell implementations where those features are available.. +m4_defun([_LT_PROG_REPLACE_SHELLFNS], +[if test x"$xsi_shell" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl + func_split_long_opt_name=${1%%=*} + func_split_long_opt_arg=${1#*=}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) + + _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) + + _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) + + _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) +fi + +if test x"$lt_shell_append" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) + + _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl + func_quote_for_eval "${2}" +dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ + eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) +fi +]) + +# _LT_PATH_CONVERSION_FUNCTIONS +# ----------------------------- +# Determine which file name conversion functions should be used by +# func_to_host_file (and, implicitly, by func_to_host_path). These are needed +# for certain cross-compile configurations and native mingw. +m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_MSG_CHECKING([how to convert $build file names to $host format]) +AC_CACHE_VAL(lt_cv_to_host_file_cmd, +[case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +]) +to_host_file_cmd=$lt_cv_to_host_file_cmd +AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) +_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], + [0], [convert $build file names to $host format])dnl + +AC_MSG_CHECKING([how to convert $build file names to toolchain format]) +AC_CACHE_VAL(lt_cv_to_tool_file_cmd, +[#assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac +]) +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) +_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], + [0], [convert $build files to toolchain format])dnl +])# _LT_PATH_CONVERSION_FUNCTIONS diff --git a/m4/ltoptions.m4 b/m4/ltoptions.m4 new file mode 100644 index 000000000000..5d9acd8e23bc --- /dev/null +++ b/m4/ltoptions.m4 @@ -0,0 +1,384 @@ +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 7 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option `$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + ]) +])# _LT_SET_OPTIONS + + +## --------------------------------- ## +## Macros to handle LT_INIT options. ## +## --------------------------------- ## + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [pic_mode=default]) + +test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + +## ----------------- ## +## LTDL_INIT Options ## +## ----------------- ## + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) diff --git a/m4/ltsugar.m4 b/m4/ltsugar.m4 new file mode 100644 index 000000000000..9000a057d31d --- /dev/null +++ b/m4/ltsugar.m4 @@ -0,0 +1,123 @@ +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) diff --git a/m4/ltversion.m4 b/m4/ltversion.m4 new file mode 100644 index 000000000000..07a8602d48d6 --- /dev/null +++ b/m4/ltversion.m4 @@ -0,0 +1,23 @@ +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# @configure_input@ + +# serial 3337 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.4.2]) +m4_define([LT_PACKAGE_REVISION], [1.3337]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.4.2' +macro_revision='1.3337' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) diff --git a/m4/lt~obsolete.m4 b/m4/lt~obsolete.m4 new file mode 100644 index 000000000000..c573da90c5cc --- /dev/null +++ b/m4/lt~obsolete.m4 @@ -0,0 +1,98 @@ +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) diff --git a/man/Makefile.am b/man/Makefile.am index e65a68cb327a..ad1802e0f605 100644 --- a/man/Makefile.am +++ b/man/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/man/Makefile.am#1 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/man/Makefile.am#2 $ +## man2_MANS = \ audit.2 \ diff --git a/man/Makefile.in b/man/Makefile.in index aeb775a64adc..56772f2ddbaa 100644 --- a/man/Makefile.in +++ b/man/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,14 +13,28 @@ # PARTICULAR PURPOSE. @SET_MAKE@ - -# -# $P4: //depot/projects/trustedbsd/openbsm/man/Makefile.in#9 $ -# VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -44,8 +58,41 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } man2dir = $(mandir)/man2 am__installdirs = "$(DESTDIR)$(man2dir)" "$(DESTDIR)$(man5dir)" man5dir = $(mandir)/man5 @@ -64,45 +111,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -111,13 +165,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -187,14 +243,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign man/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign man/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -212,110 +268,118 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs -install-man2: $(man2_MANS) $(man_MANS) +install-man2: $(man2_MANS) @$(NORMAL_INSTALL) - test -z "$(man2dir)" || $(MKDIR_P) "$(DESTDIR)$(man2dir)" - @list='$(man2_MANS) $(dist_man2_MANS) $(nodist_man2_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.2*) list="$$list $$i" ;; \ - esac; \ + @list1='$(man2_MANS)'; \ + list2=''; \ + test -n "$(man2dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man2dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man2dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.2[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^2][0-9a-z]*$$,2,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man2dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man2dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 2*) ;; \ - *) ext='2' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man2dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man2dir)/$$inst"; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man2dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man2dir)" || exit $$?; }; \ + done; } + uninstall-man2: @$(NORMAL_UNINSTALL) - @list='$(man2_MANS) $(dist_man2_MANS) $(nodist_man2_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.2*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 2*) ;; \ - *) ext='2' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man2dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man2dir)/$$inst"; \ - done -install-man5: $(man5_MANS) $(man_MANS) + @list='$(man2_MANS)'; test -n "$(man2dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^2][0-9a-z]*$$,2,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man2dir)'; $(am__uninstall_files_from_dir) +install-man5: $(man5_MANS) @$(NORMAL_INSTALL) - test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)" - @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.5*) list="$$list $$i" ;; \ - esac; \ + @list1='$(man5_MANS)'; \ + list2=''; \ + test -n "$(man5dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.5[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \ + fi; \ done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 5*) ;; \ - *) ext='5' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst"; \ - done + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \ + done; } + uninstall-man5: @$(NORMAL_UNINSTALL) - @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.5*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 5*) ;; \ - *) ext='5' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man5dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man5dir)/$$inst"; \ - done + @list='$(man5_MANS)'; test -n "$(man5dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir) tags: TAGS TAGS: ctags: CTAGS CTAGS: +cscope cscopelist: + distdir: $(DISTFILES) + @list='$(MANS)'; if test -n "$$list"; then \ + list=`for p in $$list; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ + if test -n "$$list" && \ + grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ + echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \ + grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ + echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ + echo " typically 'make maintainer-clean' will remove them" >&2; \ + exit 1; \ + else :; fi; \ + else :; fi @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -331,13 +395,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -358,16 +426,22 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -386,6 +460,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -394,18 +470,28 @@ install-data-am: install-man install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-man2 install-man5 install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -447,6 +533,7 @@ uninstall-man: uninstall-man2 uninstall-man5 # How to do MLINKS in automake? # MLINKS= getaudit.2 getaudit_addr.2 \ # setaudit.2 setaudit_addr.2 + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/man/audit.log.5 b/man/audit.log.5 index 143936c389eb..fd5289620ea9 100644 --- a/man/audit.log.5 +++ b/man/audit.log.5 @@ -24,7 +24,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/man/audit.log.5#23 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/man/audit.log.5#26 $ .\" .Dd November 5, 2006 .Dt AUDIT.LOG 5 @@ -83,7 +83,7 @@ token can be created using .It "Token ID 1 byte Token ID" .It "Seconds 4 bytes File time stamp" .It "Microseconds 4 bytes File time stamp" -.It "File name lengh 2 bytes File name of audit trail" +.It "File name length 2 bytes File name of audit trail" .It "File pathname N bytes + 1 NUL File name of audit trail" .El .Ss Header Token @@ -157,7 +157,7 @@ The .Dq arbitrary data token contains a byte stream of opaque (untyped) data. The size of the data is calculated as the size of each unit of data -multipled by the number of units of data. +multiplied by the number of units of data. A .Dq How to print field is present to specify how to print the data, but interpretation of @@ -183,7 +183,6 @@ An token can be created using .Xr au_to_in_addr 3 for an IPv4 address. -.Pp .Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL" .It Sy "Field Bytes Description" .It "Token ID 1 byte Token ID" @@ -486,13 +485,13 @@ A System V IPC permission token may be created using .It Li "Creator user ID" Ta "4 bytes" Ta "User ID of IPC creator" .It Li "Creator group ID" Ta "4 bytes" Ta "Group ID of IPC creator" .It Li "Access mode" Ta "4 bytes" Ta "Access mode" -.It Li "Sequnce number" Ta "4 bytes" Ta "Sequnce number" +.It Li "Sequence number" Ta "4 bytes" Ta "Sequence number" .It Li "Key" Ta "4 bytes" Ta "IPC key" .El .Ss Arg Token The .Dq arg -token contains informations about arguments of the system call. +token contains information about arguments of the system call. Depending on the size of the desired argument value, an Arg token may be created using .Xr au_to_arg32 3 @@ -509,7 +508,7 @@ or .Ss exec_args Token The .Dq exec_args -token contains informations about arguements of the exec() system call. +token contains information about arguments of the exec() system call. An exec_args token may be created using .Xr au_to_exec_args 3 . .Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL" @@ -521,7 +520,7 @@ An exec_args token may be created using .Ss exec_env Token The .Dq exec_env -token contains current eviroment variables to an exec() system call. +token contains current environment variables to an exec() system call. An exec_args token may be created using .Xr au_to_exec_env 3 . .Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL" @@ -551,7 +550,7 @@ token contains information about UNIX domain and Internet sockets. Each token has four or eight fields. Depending on the type of socket, a socket token may be created using .Xr au_to_sock_unix 3 , -.Xr au_to_sock_inet32 3 +.Xr au_to_sock_inet32 3 or .Xr au_to_sock_inet128 3 . .Bl -column -offset 3n ".Sy Field Name Width XX" ".Sy XX Bytes XXXX" ".Sy Description" @@ -598,7 +597,6 @@ token ... .Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL" .It Sy "Field Bytes Description" .It "Token ID 1 byte Token ID" -.It XXXXX .El .Ss Use-of-auth Token The @@ -607,7 +605,6 @@ token ... .Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL" .It Sy "Field Bytes Description" .It "Token ID 1 byte Token ID" -.It XXXXX .El .Ss Command Token The @@ -616,7 +613,6 @@ token ... .Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL" .It Sy "Field Bytes Description" .It "Token ID 1 byte Token ID" -.It XXXXX .El .Ss ACL Token The @@ -625,7 +621,6 @@ token ... .Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL" .It Sy "Field Bytes Description" .It "Token ID 1 byte Token ID" -.It XXXXX .El .Ss Zonename Token The @@ -633,10 +628,9 @@ The token holds a NUL-terminated string with the name of the zone or jail from which the record originated. A -.Dz zonename +.Dq zonename token can be created using .Xr au_to_zonename 3 . -.Pp .Bl -column -offset 3n ".No Terminal Address Type/Length" ".No N bytes + 1 NUL" .It Sy "Field Bytes Description" .It "Token ID 1 byte Token ID" diff --git a/man/audit_control.5 b/man/audit_control.5 index 801a66ea7d55..69ff80c54a7c 100644 --- a/man/audit_control.5 +++ b/man/audit_control.5 @@ -26,7 +26,7 @@ .\" IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE .\" POSSIBILITY OF SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/man/audit_control.5#23 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/man/audit_control.5#26 $ .\" .Dd May 14, 2009 .Dt AUDIT_CONTROL 5 @@ -52,6 +52,18 @@ audit system. See .Xr audit 8 for a description of how to restart the audit system. +.It Va dist +When set to +.Va on +or +.Va yes , +.Xr auditd 8 +will be creating hardlinks to all trail files in +.Pa /var/audit/dist +directory. +Those hardlinks will be consumed by the +.Xr auditdistd 8 +daemon. .It Va flags Specifies which audit event classes are audited for all users. .Xr audit_user 5 @@ -92,7 +104,7 @@ For example, 2M is the same as 2097152. .It Va expire-after Specifies when audit log files will expire and be removed. This may be after a time period has passed since the file was last -written to or when the aggregate of all the trail files have reached a +written to or when the aggregate of all the trail files have reached a specified size or a combination of both. If no expire-after parameter is given then audit log files will not expire and be removed by the audit control system. @@ -208,13 +220,13 @@ Disk space used in Bytes. .It Li K Disk space used in Kilobytes. .It Li M -Disk space used in Megabytes. +Disk space used in Megabytes. .It Li G -Disk space used in Gigabytes. +Disk space used in Gigabytes. .El .Pp -The suffixes on the values are case sensitive. -If both an age and disk space value are used they are seperated by +The suffixes on the values are case sensitive. +If both an age and disk space value are used they are separated by AND or OR and both values are used to determine when audit log files expire. In the case of AND, both the age and disk space conditions must be met @@ -222,7 +234,7 @@ before the log file is removed. In the case of OR, either condition may expire the log file. For example: .Bd -literal -offset indent -expire-after: 60d AND 1G +expire-after: 60d AND 1G .Ed .Pp will expire files that are older than 60 days but only if 1 diff --git a/man/auditon.2 b/man/auditon.2 index e43debbfd463..8b880b7f9125 100644 --- a/man/auditon.2 +++ b/man/auditon.2 @@ -26,7 +26,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/man/auditon.2#16 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/man/auditon.2#18 $ .\" .Dd January 29, 2009 .Dt AUDITON 2 @@ -73,25 +73,25 @@ and .Dv AUDIT_ARGE . If .Dv AUDIT_CNT is set, the system will continue even if it becomes low -on space and discontinue logging events until the low space condition is +on space and discontinue logging events until the low space condition is remedied. -If it is not set, audited events will block until the low space +If it is not set, audited events will block until the low space condition is remedied. Unaudited events, however, are unaffected. -If -.Dv AUDIT_AHLT is set, a +If +.Dv AUDIT_AHLT is set, a .Xr panic 9 if it cannot write an event to the global audit log file. -If +If .Dv AUDIT_ARGV -is set, then the argument list passed to the -.Xr execve 2 +is set, then the argument list passed to the +.Xr execve 2 system call will be audited. If .Dv AUDIT_ARGE is set, then the environment variables passed to the .Xr execve 2 system call will be audited. The default policy is none of the audit policy -control flags set. +control flags set. .It Dv A_SETKAUDIT Set the host information. The @@ -102,7 +102,7 @@ must point to a structure containing the host IP address information. After setting, audit records that are created as a result of kernel events will contain -this information. +this information. .It Dv A_SETKMASK Set the kernel preselection masks (success and failure). The @@ -110,9 +110,9 @@ The argument must point to a .Vt au_mask_t -structure containing the mask values as defined in +structure containing the mask values as defined in .In bsm/audit.h . -These masks are used for non-attributable audit event preselection. +These masks are used for non-attributable audit event preselection. The field .Fa am_success specifies which classes of successful audit events are to be logged to the @@ -197,14 +197,14 @@ audit condition, one of .Dv AUC_NOAUDIT , or .Dv AUC_DISABLED . -If -.Dv AUC_NOAUDIT -is set, then auditing is temporarily suspended. If +If +.Dv AUC_NOAUDIT +is set, then auditing is temporarily suspended. If .Dv AUC_AUDITING -is set, auditing is resumed. If -.Dv AUC_DISABLED +is set, auditing is resumed. If +.Dv AUC_DISABLED is set, the auditing system will -shutdown, draining all audit records and closing out the audit trail file. +shutdown, draining all audit records and closing out the audit trail file. .It Dv A_SETCLASS Set the event class preselection mask for an audit event. The @@ -215,7 +215,7 @@ must point to a structure containing the audit event and mask. The field .Fa ec_number -is the audit event and +is the audit event and .Fa ec_class is the audit class mask. See .Xr audit_event 5 @@ -237,7 +237,7 @@ The field must point to a .Fa au_mask_t structure which holds the preselection masks as described in the -.Da A_SETKMASK +.Dv A_SETKMASK section above. .It Dv A_SETFSIZE Set the maximum size of the audit log file. @@ -259,7 +259,7 @@ argument must point to a .Vt au_evclass_map_t structure. See the -.Dv A_SETCLASS +.Dv A_SETCLASS section above for more information. .It Dv A_GETKAUDIT Get the current host information. @@ -277,23 +277,23 @@ argument must point to a .Vt auditpinfo_t structure which will be set to contain -.Fa ap_auid -(the audit ID), +.Fa ap_auid +(the audit ID), .Fa ap_mask (the preselection mask), .Fa ap_termid (the terminal ID), and -.Fa ap_asid +.Fa ap_asid (the audit session ID) of the given target process. -The process ID of the target process is passed +The process ID of the target process is passed into the kernel using the .Fa ap_pid field. See the section .Dv A_SETPMASK -above and -.Xr getaudit 2 +above and +.Xr getaudit 2 for more information. .It Dv A_GETPINFO_ADDR Return the extended audit settings for a process. @@ -302,20 +302,20 @@ The argument must point to a .Vt auditpinfo_addr_t -structure which is similar to the +structure which is similar to the .Vt auditpinfo_addr_t -structure described above. -The exception is the +structure described above. +The exception is the .Fa ap_termid (the terminal ID) field which points to a -.Vt au_tid_addr_t -structure can hold much a larger terminal address and an address type. +.Vt au_tid_addr_t +structure can hold much a larger terminal address and an address type. The process ID of the target process is passed into the kernel using the .Fa ap_pid field. -See the section +See the section .Dv A_SETPMASK -above and +above and .Xr getaudit 2 for more information. .It Dv A_GETSINFO_ADDR @@ -326,10 +326,10 @@ argument must point to a .Vt auditinfo_addr_t structure. -The audit session ID of the target session is passed +The audit session ID of the target session is passed into the kernel using the .Fa ai_asid -field. See +field. See .Xr getaudit_addr 2 for more information about the .Vt auditinfo_addr_t @@ -353,8 +353,8 @@ must point to a value which will be set to one of the current audit policy flags. The audit policy flags are -described in the -.Dv A_SETPOLICY +described in the +.Dv A_SETPOLICY section above. .It Dv A_GETQCTRL Return the current kernel audit queue control parameters. @@ -411,12 +411,12 @@ argument must point to a .Vt int value which will be set to -the current audit condition, one of +the current audit condition, one of .Dv AUC_AUDITING , -.Dv AUC_NOAUDIT +.Dv AUC_NOAUDIT or .Dv AUC_DISABLED . -See the +See the .Dv A_SETCOND section above for more information. .It Dv A_SENDTRIGGER diff --git a/man/getaudit.2 b/man/getaudit.2 index 77a0f8e21fcf..5935273ba45e 100644 --- a/man/getaudit.2 +++ b/man/getaudit.2 @@ -24,7 +24,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/man/getaudit.2#10 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/man/getaudit.2#11 $ .\" .Dd October 19, 2008 .Dt GETAUDIT 2 @@ -156,7 +156,7 @@ The .Fa length argument indicates an overflow condition will occur. .It Bq Er E2BIG -The address is too big and, therefore, +The address is too big and, therefore, .Fn getaudit_addr should be used instead. .El diff --git a/man/setaudit.2 b/man/setaudit.2 index 5426c87b83f2..41448d64699f 100644 --- a/man/setaudit.2 +++ b/man/setaudit.2 @@ -24,7 +24,7 @@ .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.\" $P4: //depot/projects/trustedbsd/openbsm/man/setaudit.2#10 $ +.\" $P4: //depot/projects/trustedbsd/openbsm/man/setaudit.2#12 $ .\" .Dd April 19, 2005 .Dt SETAUDIT 2 @@ -58,9 +58,7 @@ and The .Fa auditinfo_t data structure is defined as follows: -.nf -.in +4n - +.Bd -literal -offset 4n struct auditinfo { au_id_t ai_auid; /* Audit user ID */ au_mask_t ai_mask; /* Audit masks */ @@ -68,62 +66,50 @@ struct auditinfo { au_asid_t ai_asid; /* Audit session ID */ }; typedef struct auditinfo auditinfo_t; -.in -.fi +.Ed .Pp The .Fa ai_auid -variable contains the audit identifier which is recorded in the audit log for +variable contains the audit identifier which is recorded in the audit log for each event the process caused. -.PP - +.Pp The .Fa au_mask_t -data structure defines the bit mask for auditing successful and failed events +data structure defines the bit mask for auditing successful and failed events out of the predefined list of event classes. It is defined as follows: -.nf -.in +4n - +.Bd -literal -offset 4n struct au_mask { unsigned int am_success; /* success bits */ unsigned int am_failure; /* failure bits */ }; typedef struct au_mask au_mask_t; -.in -.fi -.PP - +.Ed +.Pp The .Fa au_termid_t -data structure defines the Terminal ID recorded with every event caused by the +data structure defines the Terminal ID recorded with every event caused by the process. It is defined as follows: -.nf -.in +4n - +.Bd -literal -offset 4n struct au_tid { dev_t port; u_int32_t machine; }; typedef struct au_tid au_tid_t; - -.in -.fi -.PP +.Ed +.Pp The .Fa ai_asid -variable contains the audit session ID which is recorded with every event +variable contains the audit session ID which is recorded with every event caused by the process. .Pp The .Fn setaudit_addr system call uses the expanded -.Fa auditinfo_addr_t +.Fa auditinfo_addr_t data structure supports Terminal IDs with larger addresses such as those used in IP version 6. It is defined as follows: -.nf -.in +4n - +.Bd -literal -offset 4n struct auditinfo_addr { au_id_t ai_auid; /* Audit user ID. */ au_mask_t ai_mask; /* Audit masks. */ @@ -131,24 +117,20 @@ struct auditinfo_addr { au_asid_t ai_asid; /* Audit session ID. */ }; typedef struct auditinfo_addr auditinfo_addr_t; -.in -.fi +.Ed .Pp -The +The .Fa au_tid_addr_t -data structure which includes a larger address storage field and an additional +data structure which includes a larger address storage field and an additional field with the type of address stored: -.nf -.in +4n - +.Bd -literal -offset 4n struct au_tid_addr { dev_t at_port; u_int32_t at_type; u_int32_t at_addr[4]; }; typedef struct au_tid_addr au_tid_addr_t; -.in -.fi +.Ed .Pp These system calls require an appropriate privilege to complete. .Sh RETURN VALUES diff --git a/modules/Makefile.am b/modules/Makefile.am index 41f70f553ead..7d59ec2ea046 100644 --- a/modules/Makefile.am +++ b/modules/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/modules/Makefile.am#1 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/modules/Makefile.am#2 $ +## SUBDIRS = \ auditfilter_noop diff --git a/modules/Makefile.in b/modules/Makefile.in index 9ce9b7e0a234..21509743ed47 100644 --- a/modules/Makefile.in +++ b/modules/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,14 +13,28 @@ # PARTICULAR PURPOSE. @SET_MAKE@ - -# -# $P4: //depot/projects/trustedbsd/openbsm/modules/Makefile.in#7 $ -# VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -44,6 +58,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ @@ -53,12 +68,45 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ @@ -71,45 +119,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -118,13 +173,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -180,14 +237,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign modules/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign modules/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign modules/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign modules/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -205,6 +262,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo @@ -213,13 +271,13 @@ clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -228,7 +286,11 @@ $(RECURSIVE_TARGETS): done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -236,50 +298,23 @@ $(RECURSIVE_TARGETS): else \ local_target="$$target"; \ fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done +cscopelist-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) @@ -287,14 +322,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ @@ -306,7 +341,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ @@ -315,29 +350,48 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -358,29 +412,41 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ + am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ @@ -400,16 +466,22 @@ install-am: all-am installcheck: installcheck-recursive install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -428,6 +500,8 @@ dvi-am: html: html-recursive +html-am: + info: info-recursive info-am: @@ -436,18 +510,28 @@ install-data-am: install-dvi: install-dvi-recursive +install-dvi-am: + install-exec-am: install-html: install-html-recursive +install-html-am: + install-info: install-info-recursive +install-info-am: + install-man: install-pdf: install-pdf-recursive +install-pdf-am: + install-ps: install-ps-recursive +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-recursive @@ -468,22 +552,24 @@ ps-am: uninstall-am: -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \ + cscopelist-recursive ctags-recursive install-am install-strip \ + tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am + cscopelist cscopelist-recursive ctags ctags-recursive \ + distclean distclean-generic distclean-libtool distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-recursive uninstall uninstall-am + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff --git a/modules/auditfilter_noop/Makefile.am b/modules/auditfilter_noop/Makefile.am index 1d0775be265f..5b432069fa3a 100644 --- a/modules/auditfilter_noop/Makefile.am +++ b/modules/auditfilter_noop/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/modules/auditfilter_noop/Makefile.am#3 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/modules/auditfilter_noop/Makefile.am#4 $ +## if USE_NATIVE_INCLUDES INCLUDES = -I$(top_builddir) -I$(top_srcdir) diff --git a/modules/auditfilter_noop/Makefile.in b/modules/auditfilter_noop/Makefile.in index 6cb5f853e86c..85e46f945ba3 100644 --- a/modules/auditfilter_noop/Makefile.in +++ b/modules/auditfilter_noop/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/modules/auditfilter_noop/Makefile.in#8 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -37,7 +51,8 @@ POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ subdir = modules/auditfilter_noop -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -45,14 +60,35 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } am__installdirs = "$(DESTDIR)$(libdir)" -libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) auditfilter_noop_la_LIBADD = auditfilter_noop_la_SOURCES = auditfilter_noop.c @@ -63,6 +99,7 @@ auditfilter_noop_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ @@ -74,6 +111,11 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ $(LDFLAGS) -o $@ SOURCES = auditfilter_noop.c DIST_SOURCES = auditfilter_noop.c +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) @@ -89,45 +131,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -136,13 +185,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -201,14 +252,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign modules/auditfilter_noop/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign modules/auditfilter_noop/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign modules/auditfilter_noop/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign modules/auditfilter_noop/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -226,34 +277,42 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) - test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + list2=; for p in $$list; do \ if test -f $$p; then \ - f=$(am__strip_dir) \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ + list2="$$list2 $$p"; \ else :; fi; \ - done + done; \ + test -z "$$list2" || { \ + echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ + } uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p=$(am__strip_dir) \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ + @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ + for p in $$list; do \ + $(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ done clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test "$$dir" != "$$p" || dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -auditfilter_noop.la: $(auditfilter_noop_la_OBJECTS) $(auditfilter_noop_la_DEPENDENCIES) + @list='$(lib_LTLIBRARIES)'; \ + locs=`for p in $$list; do echo $$p; done | \ + sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ + sort -u`; \ + test -z "$$locs" || { \ + echo rm -f $${locs}; \ + rm -f $${locs}; \ + } +auditfilter_noop.la: $(auditfilter_noop_la_OBJECTS) $(auditfilter_noop_la_DEPENDENCIES) $(EXTRA_auditfilter_noop_la_DEPENDENCIES) $(auditfilter_noop_la_LINK) -rpath $(libdir) $(auditfilter_noop_la_OBJECTS) $(auditfilter_noop_la_LIBADD) $(LIBS) mostlyclean-compile: @@ -266,21 +325,21 @@ distclean-compile: .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< @@ -296,14 +355,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -311,29 +370,48 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -354,13 +432,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -381,16 +463,22 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -412,6 +500,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -420,18 +510,28 @@ install-data-am: install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-libLTLIBRARIES install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -457,7 +557,7 @@ uninstall-am: uninstall-libLTLIBRARIES .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libLTLIBRARIES clean-libtool ctags distclean \ + clean-libLTLIBRARIES clean-libtool cscopelist ctags distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ @@ -470,6 +570,7 @@ uninstall-am: uninstall-libLTLIBRARIES mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags uninstall uninstall-am uninstall-libLTLIBRARIES + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/sys/Makefile.am b/sys/Makefile.am index ed94c4ebf324..17b3afb964bf 100644 --- a/sys/Makefile.am +++ b/sys/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/sys/Makefile.am#1 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/sys/Makefile.am#2 $ +## SUBDIRS = \ bsm diff --git a/sys/Makefile.in b/sys/Makefile.in index b6e42338a610..fa59eed52fc6 100644 --- a/sys/Makefile.in +++ b/sys/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,14 +13,28 @@ # PARTICULAR PURPOSE. @SET_MAKE@ - -# -# $P4: //depot/projects/trustedbsd/openbsm/sys/Makefile.in#4 $ -# VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -44,6 +58,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ @@ -53,12 +68,45 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ @@ -71,45 +119,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -118,13 +173,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -180,14 +237,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign sys/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign sys/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign sys/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign sys/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -205,6 +262,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo @@ -213,13 +271,13 @@ clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -228,7 +286,11 @@ $(RECURSIVE_TARGETS): done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -236,50 +298,23 @@ $(RECURSIVE_TARGETS): else \ local_target="$$target"; \ fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done +cscopelist-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) @@ -287,14 +322,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ @@ -306,7 +341,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ @@ -315,29 +350,48 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -358,29 +412,41 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ + am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ @@ -400,16 +466,22 @@ install-am: all-am installcheck: installcheck-recursive install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -428,6 +500,8 @@ dvi-am: html: html-recursive +html-am: + info: info-recursive info-am: @@ -436,18 +510,28 @@ install-data-am: install-dvi: install-dvi-recursive +install-dvi-am: + install-exec-am: install-html: install-html-recursive +install-html-am: + install-info: install-info-recursive +install-info-am: + install-man: install-pdf: install-pdf-recursive +install-pdf-am: + install-ps: install-ps-recursive +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-recursive @@ -468,22 +552,24 @@ ps-am: uninstall-am: -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \ + cscopelist-recursive ctags-recursive install-am install-strip \ + tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am + cscopelist cscopelist-recursive ctags ctags-recursive \ + distclean distclean-generic distclean-libtool distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-recursive uninstall uninstall-am + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff --git a/sys/bsm/Makefile.am b/sys/bsm/Makefile.am index 3857e6627427..66e79b17abfb 100644 --- a/sys/bsm/Makefile.am +++ b/sys/bsm/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/sys/bsm/Makefile.am#4 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/sys/bsm/Makefile.am#5 $ +## if ! USE_NATIVE_INCLUDES diff --git a/sys/bsm/Makefile.in b/sys/bsm/Makefile.in index d78ddf0bc5b0..465f5346036d 100644 --- a/sys/bsm/Makefile.in +++ b/sys/bsm/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/sys/bsm/Makefile.in#7 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -46,8 +60,14 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac am__openbsm_HEADERS_DIST = audit.h audit_domain.h audit_errno.h \ audit_fcntl.h audit_internal.h audit_kevents.h audit_record.h \ audit_socket_type.h @@ -56,9 +76,29 @@ am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } am__installdirs = "$(DESTDIR)$(openbsmdir)" -openbsmHEADERS_INSTALL = $(INSTALL_HEADER) HEADERS = $(openbsm_HEADERS) ETAGS = etags CTAGS = ctags @@ -75,45 +115,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -122,13 +169,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -192,14 +241,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign sys/bsm/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign sys/bsm/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign sys/bsm/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign sys/bsm/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -217,6 +266,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo @@ -225,35 +275,39 @@ clean-libtool: -rm -rf .libs _libs install-openbsmHEADERS: $(openbsm_HEADERS) @$(NORMAL_INSTALL) - test -z "$(openbsmdir)" || $(MKDIR_P) "$(DESTDIR)$(openbsmdir)" - @list='$(openbsm_HEADERS)'; for p in $$list; do \ + @list='$(openbsm_HEADERS)'; test -n "$(openbsmdir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(openbsmdir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(openbsmdir)" || exit 1; \ + fi; \ + for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(openbsmHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(openbsmdir)/$$f'"; \ - $(openbsmHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(openbsmdir)/$$f"; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(openbsmdir)'"; \ + $(INSTALL_HEADER) $$files "$(DESTDIR)$(openbsmdir)" || exit $$?; \ done uninstall-openbsmHEADERS: @$(NORMAL_UNINSTALL) - @list='$(openbsm_HEADERS)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(openbsmdir)/$$f'"; \ - rm -f "$(DESTDIR)$(openbsmdir)/$$f"; \ - done + @list='$(openbsm_HEADERS)'; test -n "$(openbsmdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(openbsmdir)'; $(am__uninstall_files_from_dir) ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -261,29 +315,48 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -304,13 +377,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -331,16 +408,22 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -359,6 +442,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -367,18 +452,28 @@ install-data-am: install-openbsmHEADERS install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -402,7 +497,7 @@ uninstall-am: uninstall-openbsmHEADERS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libtool ctags distclean distclean-generic \ + clean-libtool cscopelist ctags distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ @@ -414,6 +509,7 @@ uninstall-am: uninstall-openbsmHEADERS mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \ uninstall-am uninstall-openbsmHEADERS + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: diff --git a/sys/bsm/audit_errno.h b/sys/bsm/audit_errno.h index f7dec8d89b7d..abdaff8bf4c2 100644 --- a/sys/bsm/audit_errno.h +++ b/sys/bsm/audit_errno.h @@ -26,7 +26,7 @@ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/sys/bsm/audit_errno.h#5 $ + * $P4: //depot/projects/trustedbsd/openbsm/sys/bsm/audit_errno.h#7 $ */ #ifndef _BSM_AUDIT_ERRNO_H_ @@ -204,6 +204,8 @@ #define BSM_ERRNO_EKEYEXPIRED 220 /* Linux-specific. */ #define BSM_ERRNO_EKEYREVOKED 221 /* Linux-specific. */ #define BSM_ERRNO_EKEYREJECTED 222 /* Linux-specific. */ +#define BSM_ERRNO_ENOTCAPABLE 223 /* FreeBSD-specific. */ +#define BSM_ERRNO_ECAPMODE 224 /* FreeBSD-specific. */ /* * In the event that OpenBSM doesn't have a file representation of a local diff --git a/sys/bsm/audit_kevents.h b/sys/bsm/audit_kevents.h index 9ef255361c25..db7fc941de41 100644 --- a/sys/bsm/audit_kevents.h +++ b/sys/bsm/audit_kevents.h @@ -26,7 +26,7 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * - * $P4: //depot/projects/trustedbsd/openbsm/sys/bsm/audit_kevents.h#8 $ + * $P4: //depot/projects/trustedbsd/openbsm/sys/bsm/audit_kevents.h#9 $ */ #ifndef _BSM_AUDIT_KEVENTS_H_ @@ -597,6 +597,10 @@ #define AUE_FSCTL 43194 /* Darwin. */ #define AUE_FFSCTL 43195 /* Darwin. */ #define AUE_LPATHCONF 43196 /* FreeBSD. */ +#define AUE_PDFORK 43197 /* FreeBSD. */ +#define AUE_PDKILL 43198 /* FreeBSD. */ +#define AUE_PDGETPID 43199 /* FreeBSD. */ +#define AUE_PDWAIT 43200 /* FreeBSD. */ /* * Darwin BSM uses a number of AUE_O_* definitions, which are aliased to the diff --git a/test/Makefile.am b/test/Makefile.am index 8f20eb5eb550..7b936edad9a3 100644 --- a/test/Makefile.am +++ b/test/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/test/Makefile.am#2 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/test/Makefile.am#3 $ +## SUBDIRS = \ bsm diff --git a/test/Makefile.in b/test/Makefile.in index ecd81e0d69a5..141364f8a11f 100644 --- a/test/Makefile.in +++ b/test/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -13,14 +13,28 @@ # PARTICULAR PURPOSE. @SET_MAKE@ - -# -# $P4: //depot/projects/trustedbsd/openbsm/test/Makefile.in#8 $ -# VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -44,6 +58,7 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ @@ -53,12 +68,45 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AR = @AR@ @@ -71,45 +119,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -118,13 +173,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -180,14 +237,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign test/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign test/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -205,6 +262,7 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo @@ -213,13 +271,13 @@ clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -228,7 +286,11 @@ $(RECURSIVE_TARGETS): done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -236,50 +298,23 @@ $(RECURSIVE_TARGETS): else \ local_target="$$target"; \ fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done +cscopelist-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) @@ -287,14 +322,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ @@ -306,7 +341,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ @@ -315,29 +350,48 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -358,29 +412,41 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ am__remove_distdir=: \ am__skip_length_check=: \ + am__skip_mode_fix=: \ distdir) \ || exit 1; \ fi; \ @@ -400,16 +466,22 @@ install-am: all-am installcheck: installcheck-recursive install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -428,6 +500,8 @@ dvi-am: html: html-recursive +html-am: + info: info-recursive info-am: @@ -436,18 +510,28 @@ install-data-am: install-dvi: install-dvi-recursive +install-dvi-am: + install-exec-am: install-html: install-html-recursive +install-html-am: + install-info: install-info-recursive +install-info-am: + install-man: install-pdf: install-pdf-recursive +install-pdf-am: + install-ps: install-ps-recursive +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-recursive @@ -468,22 +552,24 @@ ps-am: uninstall-am: -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \ + cscopelist-recursive ctags-recursive install-am install-strip \ + tags-recursive .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ - ctags ctags-recursive distclean distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am + cscopelist cscopelist-recursive ctags ctags-recursive \ + distclean distclean-generic distclean-libtool distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + ps ps-am tags tags-recursive uninstall uninstall-am + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff --git a/test/bsm/Makefile.am b/test/bsm/Makefile.am index a4f58b5cf0fd..577e7cb15867 100644 --- a/test/bsm/Makefile.am +++ b/test/bsm/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/test/bsm/Makefile.am#3 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/test/bsm/Makefile.am#4 $ +## if USE_NATIVE_INCLUDES INCLUDES = -I$(top_builddir) -I$(top_srcdir) diff --git a/test/bsm/Makefile.in b/test/bsm/Makefile.in index 6db573235ab4..7482560d4781 100644 --- a/test/bsm/Makefile.in +++ b/test/bsm/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/test/bsm/Makefile.in#8 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -38,7 +52,8 @@ build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = generate$(EXEEXT) subdir = test/bsm -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -46,8 +61,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) am_generate_OBJECTS = generate.$(OBJEXT) generate_OBJECTS = $(am_generate_OBJECTS) @@ -55,6 +70,7 @@ generate_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ @@ -66,6 +82,11 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(generate_SOURCES) DIST_SOURCES = $(generate_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) @@ -81,45 +102,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -128,13 +156,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -192,14 +222,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/bsm/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign test/bsm/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/bsm/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign test/bsm/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -217,35 +247,54 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ - else :; fi; \ - done + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ - rm -f "$(DESTDIR)$(bindir)/$$f"; \ - done + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -generate$(EXEEXT): $(generate_OBJECTS) $(generate_DEPENDENCIES) + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +generate$(EXEEXT): $(generate_OBJECTS) $(generate_DEPENDENCIES) $(EXTRA_generate_DEPENDENCIES) @rm -f generate$(EXEEXT) $(LINK) $(generate_OBJECTS) $(generate_LDADD) $(LIBS) @@ -259,21 +308,21 @@ distclean-compile: .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< @@ -289,14 +338,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -304,29 +353,48 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -347,13 +415,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -374,16 +446,22 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -404,6 +482,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -412,18 +492,28 @@ install-data-am: install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-binPROGRAMS install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -449,18 +539,19 @@ uninstall-am: uninstall-binPROGRAMS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic clean-libtool ctags distclean distclean-compile \ - distclean-generic distclean-libtool distclean-tags distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-binPROGRAMS install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - pdf pdf-am ps ps-am tags uninstall uninstall-am \ - uninstall-binPROGRAMS + clean-generic clean-libtool cscopelist ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-binPROGRAMS install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-binPROGRAMS + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff --git a/tools/Makefile.am b/tools/Makefile.am index 60acbea6a946..13aa10df6836 100644 --- a/tools/Makefile.am +++ b/tools/Makefile.am @@ -1,6 +1,6 @@ -# -# $P4: //depot/projects/trustedbsd/openbsm/tools/Makefile.am#4 $ -# +## +## $P4: //depot/projects/trustedbsd/openbsm/tools/Makefile.am#5 $ +## if USE_NATIVE_INCLUDES INCLUDES = -I$(top_builddir) -I$(top_srcdir) diff --git a/tools/Makefile.in b/tools/Makefile.in index 2c0624aeee89..486e2d3d16e8 100644 --- a/tools/Makefile.in +++ b/tools/Makefile.in @@ -1,8 +1,8 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. +# Makefile.in generated by automake 1.12.2 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# Copyright (C) 1994-2012 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -14,14 +14,28 @@ @SET_MAKE@ -# -# $P4: //depot/projects/trustedbsd/openbsm/tools/Makefile.in#11 $ -# - VPATH = @srcdir@ +am__make_dryrun = \ + { \ + am__dry=no; \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ + esac; \ + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c @@ -38,7 +52,8 @@ build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = audump$(EXEEXT) subdir = tools -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/config/depcomp ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ @@ -46,8 +61,8 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config/config.h CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = am__installdirs = "$(DESTDIR)$(bindir)" -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) PROGRAMS = $(bin_PROGRAMS) am_audump_OBJECTS = audump.$(OBJEXT) audump_OBJECTS = $(am_audump_OBJECTS) @@ -55,6 +70,7 @@ audump_DEPENDENCIES = $(top_builddir)/libbsm/libbsm.la DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config depcomp = $(SHELL) $(top_srcdir)/config/depcomp am__depfiles_maybe = depfiles +am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ @@ -66,6 +82,11 @@ LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ $(LDFLAGS) -o $@ SOURCES = $(audump_SOURCES) DIST_SOURCES = $(audump_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) @@ -81,45 +102,52 @@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ -ECHO = @ECHO@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ -F77 = @F77@ -FFLAGS = @FFLAGS@ +FGREP = @FGREP@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MIG = @MIG@ MKDIR_P = @MKDIR_P@ +NM = @NM@ NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ @@ -128,13 +156,15 @@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ +YACC = @YACC@ +YFLAGS = @YFLAGS@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_F77 = @ac_ct_F77@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ @@ -192,14 +222,14 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign tools/Makefile + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tools/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign tools/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ @@ -217,35 +247,54 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - || test -f $$p1 \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ - else :; fi; \ - done + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ - rm -f "$(DESTDIR)$(bindir)/$$f"; \ - done + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f $$p $$f"; \ - rm -f $$p $$f ; \ - done -audump$(EXEEXT): $(audump_OBJECTS) $(audump_DEPENDENCIES) + @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list +audump$(EXEEXT): $(audump_OBJECTS) $(audump_DEPENDENCIES) $(EXTRA_audump_DEPENDENCIES) @rm -f audump$(EXEEXT) $(LINK) $(audump_OBJECTS) $(audump_LDADD) $(LIBS) @@ -259,21 +308,21 @@ distclean-compile: .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< @@ -289,14 +338,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ - $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ mkid -fID $$unique tags: TAGS TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ + set x; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ @@ -304,29 +353,48 @@ TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ fi ctags: CTAGS CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) - tags=; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ + test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique + $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" + +cscopelist: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags @@ -347,13 +415,17 @@ distdir: $(DISTFILES) if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done @@ -374,16 +446,22 @@ install-am: all-am installcheck: installcheck-am install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -404,6 +482,8 @@ dvi-am: html: html-am +html-am: + info: info-am info-am: @@ -412,18 +492,28 @@ install-data-am: install-dvi: install-dvi-am +install-dvi-am: + install-exec-am: install-binPROGRAMS install-html: install-html-am +install-html-am: + install-info: install-info-am +install-info-am: + install-man: install-pdf: install-pdf-am +install-pdf-am: + install-ps: install-ps-am +install-ps-am: + installcheck-am: maintainer-clean: maintainer-clean-am @@ -449,18 +539,19 @@ uninstall-am: uninstall-binPROGRAMS .MAKE: install-am install-strip .PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic clean-libtool ctags distclean distclean-compile \ - distclean-generic distclean-libtool distclean-tags distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-binPROGRAMS install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - pdf pdf-am ps ps-am tags uninstall uninstall-am \ - uninstall-binPROGRAMS + clean-generic clean-libtool cscopelist ctags distclean \ + distclean-compile distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-binPROGRAMS install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags uninstall uninstall-am uninstall-binPROGRAMS + # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. |