1 files changed, 0 insertions, 50 deletions
diff --git a/Bindings/drm/bridge/dw_hdmi.txt b/Bindings/drm/bridge/dw_hdmi.txt
deleted file mode 100644
index a905c1413558..000000000000
--- a/Bindings/drm/bridge/dw_hdmi.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-DesignWare HDMI bridge bindings
-
-Required properties:
-- compatible: platform specific such as:
-   * "snps,dw-hdmi-tx"
-   * "fsl,imx6q-hdmi"
-   * "fsl,imx6dl-hdmi"
-   * "rockchip,rk3288-dw-hdmi"
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The HDMI interrupt number
-- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
-  as described in Documentation/devicetree/bindings/clock/clock-bindings.txt,
-  the clocks are soc specific, the clock-names should be "iahb", "isfr"
--port@[X]: SoC specific port nodes with endpoint definitions as defined
-   in Documentation/devicetree/bindings/media/video-interfaces.txt,
-   please refer to the SoC specific binding document:
-    * Documentation/devicetree/bindings/drm/imx/hdmi.txt
-    * Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
-
-Optional properties
-- reg-io-width: the width of the reg:1,4, default set to 1 if not present
-- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
-
-Example:
-	hdmi: hdmi@0120000 {
-		compatible = "fsl,imx6q-hdmi";
-		reg = <0x00120000 0x9000>;
-		interrupts = <0 115 0x04>;
-		gpr = <&gpr>;
-		clocks = <&clks 123>, <&clks 124>;
-		clock-names = "iahb", "isfr";
-		ddc-i2c-bus = <&i2c2>;
-
-		port@0 {
-			reg = <0>;
-
-			hdmi_mux_0: endpoint {
-				remote-endpoint = <&ipu1_di0_hdmi>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			hdmi_mux_1: endpoint {
-				remote-endpoint = <&ipu1_di1_hdmi>;
-			};
-		};
-	};