diff options
Diffstat (limited to 'Bindings/hwmon/pwm-fan.txt')
-rw-r--r-- | Bindings/hwmon/pwm-fan.txt | 23 |
1 files changed, 20 insertions, 3 deletions
diff --git a/Bindings/hwmon/pwm-fan.txt b/Bindings/hwmon/pwm-fan.txt index 49ca5d83ed13..41b76762953a 100644 --- a/Bindings/hwmon/pwm-fan.txt +++ b/Bindings/hwmon/pwm-fan.txt @@ -7,13 +7,20 @@ Required properties: which correspond to thermal cooling states Optional properties: -- fan-supply : phandle to the regulator that provides power to the fan +- fan-supply : phandle to the regulator that provides power to the fan +- interrupts : This contains a single interrupt specifier which + describes the tachometer output of the fan as an + interrupt source. The output signal must generate a + defined number of interrupts per fan revolution, which + require that it must be self resetting edge interrupts. + See interrupt-controller/interrupts.txt for the format. +- pulses-per-revolution : define the tachometer pulses per fan revolution as + an integer (default is 2 interrupts per revolution). + The value must be greater than zero. Example: fan0: pwm-fan { compatible = "pwm-fan"; - cooling-min-state = <0>; - cooling-max-state = <3>; #cooling-cells = <2>; pwms = <&pwm 0 10000 0>; cooling-levels = <0 102 170 230>; @@ -38,3 +45,13 @@ Example: }; }; }; + +Example 2: + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 40000 0>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + pulses-per-revolution = <2>; + }; |