7 files changed, 13 insertions, 6 deletions
diff --git a/Bindings/iio/light/apds9300.txt b/Bindings/iio/light/apds9300.txt
index d6f66c73ddbf..aa199e09a493 100644
--- a/Bindings/iio/light/apds9300.txt
+++ b/Bindings/iio/light/apds9300.txt
@@ -9,7 +9,6 @@ Required properties:
 
 Optional properties:
 
-  - interrupt-parent : should be the phandle for the interrupt controller
   - interrupts : interrupt mapping for GPIO IRQ
 
 Example:
diff --git a/Bindings/iio/light/apds9960.txt b/Bindings/iio/light/apds9960.txt
index 174b709f16db..3af325ad194b 100644
--- a/Bindings/iio/light/apds9960.txt
+++ b/Bindings/iio/light/apds9960.txt
@@ -6,7 +6,6 @@ Required properties:
 
   - compatible: must be "avago,apds9960"
   - reg: the I2c address of the sensor
-  - interrupt-parent: should be the phandle for the interrupt controller
   - interrupts : the sole interrupt generated by the device
 
   Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Bindings/iio/light/isl29018.txt b/Bindings/iio/light/isl29018.txt
index 425ab459e209..b9bbde3e13ed 100644
--- a/Bindings/iio/light/isl29018.txt
+++ b/Bindings/iio/light/isl29018.txt
@@ -10,7 +10,6 @@ Required properties:
 
 Optional properties:
 
-  - interrupt-parent: should be the phandle for the interrupt controller
   - interrupts: the sole interrupt generated by the device
 
   Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Bindings/iio/light/isl29501.txt b/Bindings/iio/light/isl29501.txt
new file mode 100644
index 000000000000..46957997fee3
--- /dev/null
+++ b/Bindings/iio/light/isl29501.txt
@@ -0,0 +1,13 @@
+* ISL29501 Time-of-flight sensor.
+
+Required properties:
+
+  - compatible : should be "renesas,isl29501"
+  - reg : the I2C address of the sensor
+
+Example:
+
+isl29501@57 {
+	compatible = "renesas,isl29501";
+	reg = <0x57>;
+};
diff --git a/Bindings/iio/light/opt3001.txt b/Bindings/iio/light/opt3001.txt
index eac30d508849..47b13eb8f4ec 100644
--- a/Bindings/iio/light/opt3001.txt
+++ b/Bindings/iio/light/opt3001.txt
@@ -13,7 +13,6 @@ Required properties:
   - reg: the I2C address of the sensor
 
 Optional properties:
-  - interrupt-parent: should be the phandle for the interrupt controller
   - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
 
 Example:
diff --git a/Bindings/iio/light/tsl2583.txt b/Bindings/iio/light/tsl2583.txt
index 8e2066c83f70..059dffa1829a 100644
--- a/Bindings/iio/light/tsl2583.txt
+++ b/Bindings/iio/light/tsl2583.txt
@@ -10,7 +10,6 @@ Required properties:
 
 Optional properties:
 
-  - interrupt-parent: should be the phandle for the interrupt controller
   - interrupts: the sole interrupt generated by the device
 
   Refer to interrupt-controller/interrupts.txt for generic interrupt client
diff --git a/Bindings/iio/light/uvis25.txt b/Bindings/iio/light/uvis25.txt
index 3041207e3f3c..043c139d91e6 100644
--- a/Bindings/iio/light/uvis25.txt
+++ b/Bindings/iio/light/uvis25.txt
@@ -5,7 +5,6 @@ Required properties:
 - reg: i2c address of the sensor / spi cs line
 
 Optional properties:
-- interrupt-parent: should be the phandle for the interrupt controller
 - interrupts: interrupt mapping for IRQ. It should be configured with
   flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
   IRQ_TYPE_EDGE_FALLING.