diff options
Diffstat (limited to 'Bindings/net/stmmac.txt')
| -rw-r--r-- | Bindings/net/stmmac.txt | 17 |
1 files changed, 13 insertions, 4 deletions
diff --git a/Bindings/net/stmmac.txt b/Bindings/net/stmmac.txt index 95816c5fc589..128da752fec9 100644 --- a/Bindings/net/stmmac.txt +++ b/Bindings/net/stmmac.txt @@ -1,7 +1,7 @@ * STMicroelectronics 10/100/1000 Ethernet driver (GMAC) Required properties: -- compatible: Should be "snps,dwmac-<ip_version>" "snps,dwmac" +- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" For backwards compatibility: "st,spear600-gmac" is also supported. - reg: Address and length of the register set for the device - interrupt-parent: Should be the phandle for the interrupt controller @@ -34,7 +34,13 @@ Optional properties: platforms. - tx-fifo-depth: See ethernet.txt file in the same directory - rx-fifo-depth: See ethernet.txt file in the same directory -- snps,pbl Programmable Burst Length +- snps,pbl Programmable Burst Length (tx and rx) +- snps,txpbl Tx Programmable Burst Length. Only for GMAC and newer. + If set, DMA tx will use this value rather than snps,pbl. +- snps,rxpbl Rx Programmable Burst Length. Only for GMAC and newer. + If set, DMA rx will use this value rather than snps,pbl. +- snps,no-pbl-x8 Don't multiply the pbl/txpbl/rxpbl values by 8. + For core rev < 3.50, don't multiply the values by 4. - snps,aal Address-Aligned Beats - snps,fixed-burst Program the DMA to use the fixed burst mode - snps,mixed-burst Program the DMA to use the mixed burst mode @@ -47,6 +53,11 @@ Optional properties: supported by this device instance - snps,perfect-filter-entries: Number of perfect filter entries supported by this device instance +- snps,ps-speed: port selection speed that can be passed to the core when + PCS is supported. For example, this is used in case of SGMII + and MAC2MAC connection. +- snps,tso: this enables the TSO feature otherwise it will be managed by + MAC HW capability register. Only for GMAC4 and newer. - AXI BUS Mode parameters: below the list of all the parameters to program the AXI register inside the DMA module: - snps,lpi_en: enable Low Power Interface @@ -59,8 +70,6 @@ Optional properties: - snps,fb: fixed-burst - snps,mb: mixed-burst - snps,rb: rebuild INCRx Burst - - snps,tso: this enables the TSO feature otherwise it will be managed by - MAC HW capability register. - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus. Examples: |