diff options
Diffstat (limited to 'Bindings/phy/phy-rockchip-inno-usb2.txt')
| -rw-r--r-- | Bindings/phy/phy-rockchip-inno-usb2.txt | 13 |
1 files changed, 10 insertions, 3 deletions
diff --git a/Bindings/phy/phy-rockchip-inno-usb2.txt b/Bindings/phy/phy-rockchip-inno-usb2.txt index 84d59b0db8df..074a7b3b0425 100644 --- a/Bindings/phy/phy-rockchip-inno-usb2.txt +++ b/Bindings/phy/phy-rockchip-inno-usb2.txt @@ -6,6 +6,7 @@ Required properties (phy (parent) node): * "rockchip,rk3328-usb2phy" * "rockchip,rk3366-usb2phy" * "rockchip,rk3399-usb2phy" + * "rockchip,rv1108-usb2phy" - reg : the address offset of grf for usb-phy configuration. - #clock-cells : should be 0. - clock-output-names : specify the 480m output clock name. @@ -18,6 +19,10 @@ Optional properties: usb-phy output 480m and xin24m. Refer to clk/clock-bindings.txt for generic clock consumer properties. + - rockchip,usbgrf : phandle to the syscon managing the "usb general + register files". When set driver will request its + phandle as one companion-grf for some special SoCs + (e.g RV1108). Required nodes : a sub-node is required for each port the phy provides. The sub-node name is used to identify host or otg port, @@ -28,10 +33,14 @@ Required nodes : a sub-node is required for each port the phy provides. Required properties (port (child) node): - #phy-cells : must be 0. See ./phy-bindings.txt for details. - interrupts : specify an interrupt for each entry in interrupt-names. - - interrupt-names : a list which shall be the following entries: + - interrupt-names : a list which should be one of the following cases: + Regular case: * "otg-id" : for the otg id interrupt. * "otg-bvalid" : for the otg vbus interrupt. * "linestate" : for the host/otg linestate interrupt. + Some SoCs use one interrupt with the above muxed together, so for these + * "otg-mux" : otg-port interrupt, which mux otg-id/otg-bvalid/linestate + to one. Optional properties: - phy-supply : phandle to a regulator that provides power to VBUS. @@ -58,14 +67,12 @@ grf: syscon@ff770000 { <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "otg-id", "otg-bvalid", "linestate"; - status = "okay"; }; u2phy_host: host-port { #phy-cells = <0>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "linestate"; - status = "okay"; }; }; }; |