1 files changed, 0 insertions, 67 deletions
diff --git a/Bindings/powerpc/fsl/cpm_qe/cpm.txt b/Bindings/powerpc/fsl/cpm_qe/cpm.txt
deleted file mode 100644
index 160c752484b4..000000000000
--- a/Bindings/powerpc/fsl/cpm_qe/cpm.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Freescale Communications Processor Module
-
-NOTE: This is an interim binding, and will likely change slightly,
-as more devices are supported.  The QE bindings especially are
-incomplete.
-
-* Root CPM node
-
-Properties:
-- compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe".
-- reg : A 48-byte region beginning with CPCR.
-
-Example:
-     cpm@119c0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	#interrupt-cells = <2>;
-	compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
-	reg = <119c0 30>;
-     }
-
-* Properties common to multiple CPM/QE devices
-
-- fsl,cpm-command : This value is ORed with the opcode and command flag
-                    to specify the device on which a CPM command operates.
-
-- fsl,cpm-brg : Indicates which baud rate generator the device
-                is associated with.  If absent, an unused BRG
-                should be dynamically allocated.  If zero, the
-                device uses an external clock rather than a BRG.
-
-- reg : Unless otherwise specified, the first resource represents the
-        scc/fcc/ucc registers, and the second represents the device's
-        parameter RAM region (if it has one).
-
-* Multi-User RAM (MURAM)
-
-The multi-user/dual-ported RAM is expressed as a bus under the CPM node.
-
-Ranges must be set up subject to the following restrictions:
-
-- Children's reg nodes must be offsets from the start of all muram, even
-  if the user-data area does not begin at zero.
-- If multiple range entries are used, the difference between the parent
-  address and the child address must be the same in all, so that a single
-  mapping can cover them all while maintaining the ability to determine
-  CPM-side offsets with pointer subtraction.  It is recommended that
-  multiple range entries not be used.
-- A child address of zero must be translatable, even if no reg resources
-  contain it.
-
-A child "data" node must exist, compatible with "fsl,cpm-muram-data", to
-indicate the portion of muram that is usable by the OS for arbitrary
-purposes.  The data node may have an arbitrary number of reg resources,
-all of which contribute to the allocatable muram pool.
-
-Example, based on mpc8272:
-	muram@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 10000>;
-
-		data@0 {
-			compatible = "fsl,cpm-muram-data";
-			reg = <0 2000 9800 800>;
-		};
-	};