diff options
Diffstat (limited to 'Bindings/reset/uniphier-reset.txt')
| -rw-r--r-- | Bindings/reset/uniphier-reset.txt | 56 |
1 files changed, 56 insertions, 0 deletions
diff --git a/Bindings/reset/uniphier-reset.txt b/Bindings/reset/uniphier-reset.txt index 93efed629900..101743dda223 100644 --- a/Bindings/reset/uniphier-reset.txt +++ b/Bindings/reset/uniphier-reset.txt @@ -118,3 +118,59 @@ Example: other nodes ... }; + + +USB3 core reset +--------------- + +USB3 core reset belongs to USB3 glue layer. Before using the core reset, +it is necessary to control the clocks and resets to enable this layer. +These clocks and resets should be described in each property. + +Required properties: +- compatible: Should be + "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC + "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC + "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC + "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC +- #reset-cells: Should be 1. +- reg: Specifies offset and length of the register set for the device. +- clocks: A list of phandles to the clock gate for USB3 glue layer. + According to the clock-names, appropriate clocks are required. +- clock-names: Should contain + "gio", "link" - for Pro4 SoC + "link" - for others +- resets: A list of phandles to the reset control for USB3 glue layer. + According to the reset-names, appropriate resets are required. +- reset-names: Should contain + "gio", "link" - for Pro4 SoC + "link" - for others + +Example: + + usb-glue@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb_rst: reset@0 { + compatible = "socionext,uniphier-ld20-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + regulator { + ... + }; + + phy { + ... + }; + ... + }; |