aboutsummaryrefslogtreecommitdiff
path: root/Bindings/serial/of-serial.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Bindings/serial/of-serial.txt')
-rw-r--r--Bindings/serial/of-serial.txt66
1 files changed, 0 insertions, 66 deletions
diff --git a/Bindings/serial/of-serial.txt b/Bindings/serial/of-serial.txt
deleted file mode 100644
index 91d5ab0e60fc..000000000000
--- a/Bindings/serial/of-serial.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* UART (Universal Asynchronous Receiver/Transmitter)
-
-Required properties:
-- compatible : one of:
- - "ns8250"
- - "ns16450"
- - "ns16550a"
- - "ns16550"
- - "ns16750"
- - "ns16850"
- - For Tegra20, must contain "nvidia,tegra20-uart"
- - For other Tegra, must contain '"nvidia,<chip>-uart",
- "nvidia,tegra20-uart"' where <chip> is tegra30, tegra114, tegra124,
- tegra132, or tegra210.
- - "nxp,lpc3220-uart"
- - "ralink,rt2880-uart"
- - "ibm,qpace-nwp-serial"
- - "altr,16550-FIFO32"
- - "altr,16550-FIFO64"
- - "altr,16550-FIFO128"
- - "fsl,16550-FIFO64"
- - "fsl,ns16550"
- - "serial" if the port type is unknown.
-- reg : offset and length of the register set for the device.
-- interrupts : should contain uart interrupt.
-- clock-frequency : the input clock frequency for the UART
- or
- clocks phandle to refer to the clk used as per Documentation/devicetree
- /bindings/clock/clock-bindings.txt
-
-Optional properties:
-- current-speed : the current active speed of the UART.
-- reg-offset : offset to apply to the mapbase from the start of the registers.
-- reg-shift : quantity to shift the register offsets by.
-- reg-io-width : the size (in bytes) of the IO accesses that should be
- performed on the device. There are some systems that require 32-bit
- accesses to the UART (e.g. TI davinci).
-- used-by-rtas : set to indicate that the port is in use by the OpenFirmware
- RTAS and should not be registered.
-- no-loopback-test: set to indicate that the port does not implements loopback
- test mode
-- fifo-size: the fifo size of the UART.
-- auto-flow-control: one way to enable automatic flow control support. The
- driver is allowed to detect support for the capability even without this
- property.
-
-Note:
-* fsl,ns16550:
- ------------
- Freescale DUART is very similar to the PC16552D (and to a
- pair of NS16550A), albeit with some nonstandard behavior such as
- erratum A-004737 (relating to incorrect BRK handling).
-
- Represents a single port that is compatible with the DUART found
- on many Freescale chips (examples include mpc8349, mpc8548,
- mpc8641d, p4080 and ls2085a).
-
-Example:
-
- uart@80230000 {
- compatible = "ns8250";
- reg = <0x80230000 0x100>;
- clock-frequency = <3686400>;
- interrupts = <10>;
- reg-shift = <2>;
- };