aboutsummaryrefslogtreecommitdiff
path: root/Bindings/watchdog/st_lpc_wdt.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Bindings/watchdog/st_lpc_wdt.txt')
-rw-r--r--Bindings/watchdog/st_lpc_wdt.txt42
1 files changed, 42 insertions, 0 deletions
diff --git a/Bindings/watchdog/st_lpc_wdt.txt b/Bindings/watchdog/st_lpc_wdt.txt
new file mode 100644
index 000000000000..039c5ca45577
--- /dev/null
+++ b/Bindings/watchdog/st_lpc_wdt.txt
@@ -0,0 +1,42 @@
+STMicroelectronics Low Power Controller (LPC) - Watchdog
+========================================================
+
+LPC currently supports Watchdog OR Real Time Clock OR Clocksource
+functionality.
+
+[See: ../rtc/rtc-st-lpc.txt for RTC options]
+[See: ../timer/st,stih407-lpc for Clocksource options]
+
+Required properties
+
+- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc"
+ "st,stih415-lpc" "st,stid127-lpc"
+- reg : LPC registers base address + size
+- interrupts : LPC interrupt line number and associated flags
+- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt)
+- st,lpc-mode : The LPC can run either one of three modes:
+ ST_LPC_MODE_RTC [0]
+ ST_LPC_MODE_WDT [1]
+ ST_LPC_MODE_CLKSRC [2]
+ One (and only one) mode must be selected.
+
+Required properties [watchdog mode]
+
+- st,syscfg : Phandle to syscfg node used to enable watchdog and configure
+ CPU reset type.
+- timeout-sec : Watchdog timeout in seconds
+
+Optional properties [watchdog mode]
+
+- st,warm-reset : If present reset type will be 'warm' - if not it will be cold
+
+Example:
+ lpc@fde05000 {
+ compatible = "st,stih407-lpc";
+ reg = <0xfde05000 0x1000>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+ st,syscfg = <&syscfg_core>;
+ timeout-sec = <120>;
+ st,lpc-mode = <ST_LPC_MODE_WDT>;
+ st,warm-reset;
+ };