aboutsummaryrefslogtreecommitdiff
path: root/Makefile.config.in
diff options
context:
space:
mode:
Diffstat (limited to 'Makefile.config.in')
-rw-r--r--Makefile.config.in359
1 files changed, 0 insertions, 359 deletions
diff --git a/Makefile.config.in b/Makefile.config.in
deleted file mode 100644
index 5c737580632e..000000000000
--- a/Makefile.config.in
+++ /dev/null
@@ -1,359 +0,0 @@
-#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===#
-#
-# The LLVM Compiler Infrastructure
-#
-# This file is distributed under the University of Illinois Open Source
-# License. See LICENSE.TXT for details.
-#
-#===------------------------------------------------------------------------===#
-#
-# This file is included by Makefile.common. It defines paths and other
-# values specific to a particular installation of LLVM.
-#
-#===------------------------------------------------------------------------===#
-
-# Define LLVM specific info and directories based on the autoconf variables
-LLVMPackageName := @PACKAGE_NAME@
-LLVMVersion := @PACKAGE_VERSION@
-LLVM_CONFIGTIME := @LLVM_CONFIGTIME@
-
-###########################################################################
-# Directory Configuration
-# This section of the Makefile determines what is where. To be
-# specific, there are several locations that need to be defined:
-#
-# o LLVM_SRC_ROOT : The root directory of the LLVM source code.
-# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code.
-#
-# o PROJ_SRC_DIR : The directory containing the code to build.
-# o PROJ_SRC_ROOT : The root directory of the code to build.
-#
-# o PROJ_OBJ_DIR : The directory in which compiled code will be placed.
-# o PROJ_OBJ_ROOT : The root directory in which compiled code is placed.
-#
-###########################################################################
-
-PWD := @BINPWD@
-# Set the project name to LLVM if its not defined
-ifndef PROJECT_NAME
-PROJECT_NAME := $(LLVMPackageName)
-endif
-
-# The macro below is expanded when 'realpath' is not built-in.
-# Built-in 'realpath' is available on GNU Make 3.81.
-realpath = $(shell cd $(1); $(PWD))
-
-PROJ_OBJ_DIR := $(call realpath, .)
-PROJ_OBJ_ROOT := $(call realpath, $(PROJ_OBJ_DIR)/$(LEVEL))
-
-ifeq ($(PROJECT_NAME),llvm)
-LLVM_SRC_ROOT := $(call realpath, @abs_top_srcdir@)
-LLVM_OBJ_ROOT := $(call realpath, @abs_top_builddir@)
-PROJ_SRC_ROOT := $(LLVM_SRC_ROOT)
-PROJ_SRC_DIR := $(call realpath, $(LLVM_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)))
-prefix := @prefix@
-PROJ_prefix := $(prefix)
-PROJ_VERSION := $(LLVMVersion)
-else
-ifndef PROJ_SRC_ROOT
-$(error Projects must define PROJ_SRC_ROOT)
-endif
-ifndef PROJ_OBJ_ROOT
-$(error Projects must define PROJ_OBJ_ROOT)
-endif
-ifndef PROJ_INSTALL_ROOT
-$(error Projects must define PROJ_INSTALL_ROOT)
-endif
-ifndef LLVM_SRC_ROOT
-$(error Projects must define LLVM_SRC_ROOT)
-endif
-ifndef LLVM_OBJ_ROOT
-$(error Projects must define LLVM_OBJ_ROOT)
-endif
-PROJ_SRC_DIR := $(call realpath, $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)))
-prefix := $(PROJ_INSTALL_ROOT)
-PROJ_prefix := $(prefix)
-ifndef PROJ_VERSION
-PROJ_VERSION := 1.0
-endif
-endif
-
-LLVMMAKE := $(LLVM_SRC_ROOT)/make
-
-PROJ_bindir := $(PROJ_prefix)/bin
-PROJ_libdir := $(PROJ_prefix)/lib
-PROJ_datadir := $(PROJ_prefix)/share
-PROJ_docsdir := $(PROJ_prefix)/docs/llvm
-PROJ_etcdir := $(PROJ_prefix)/etc/llvm
-PROJ_includedir := $(PROJ_prefix)/include
-PROJ_infodir := $(PROJ_prefix)/info
-PROJ_mandir := $(PROJ_prefix)/share/man
-
-# Determine if we're on a unix type operating system
-LLVM_ON_UNIX:=@LLVM_ON_UNIX@
-LLVM_ON_WIN32:=@LLVM_ON_WIN32@
-
-# Host operating system for which LLVM will be run.
-OS=@OS@
-HOST_OS=@HOST_OS@
-# Target operating system for which LLVM will compile for.
-TARGET_OS=@TARGET_OS@
-
-# Target hardware architecture
-ARCH=@ARCH@
-
-# Indicates, whether we're cross-compiling LLVM or not
-LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@
-
-# Executable file extension for build platform (mainly for
-# tablegen call if we're cross-compiling).
-BUILD_EXEEXT=@BUILD_EXEEXT@
-
-# Compilers for the build platflorm (mainly for tablegen
-# call if we're cross-compiling).
-BUILD_CC=@BUILD_CC@
-BUILD_CXX=@BUILD_CXX@
-
-# Triple for configuring build tools when cross-compiling
-BUILD_TRIPLE=@build@
-
-# Target triple (cpu-vendor-os) for which we should generate code
-TARGET_TRIPLE=@target@
-
-# Extra options to compile LLVM with
-EXTRA_OPTIONS=@EXTRA_OPTIONS@
-
-# Endian-ness of the target
-ENDIAN=@ENDIAN@
-
-# Path to the C++ compiler to use. This is an optional setting, which defaults
-# to whatever your gmake defaults to.
-CXX = @CXX@
-
-# Path to the CC binary, which use used by testcases for native builds.
-CC := @CC@
-
-# Linker flags.
-LDFLAGS+=@LDFLAGS@
-
-# Path to the library archiver program.
-AR_PATH = @AR@
-AR = @AR@
-
-# Path to the nm program
-NM_PATH = @NM@
-
-# The pathnames of the programs we require to build
-CMP := @CMP@
-CP := @CP@
-DATE := @DATE@
-FIND := @FIND@
-GREP := @GREP@
-INSTALL := @INSTALL@
-MKDIR := $(LLVM_SRC_ROOT)/autoconf/mkinstalldirs
-MV := @MV@
-RANLIB := @RANLIB@
-RM := @RM@
-SED := @SED@
-TAR := @TAR@
-
-# Paths to miscellaneous programs we hope are present but might not be
-PERL := @PERL@
-BZIP2 := @BZIP2@
-CAT := @CAT@
-DOT := @DOT@
-DOXYGEN := @DOXYGEN@
-GROFF := @GROFF@
-GZIPBIN := @GZIPBIN@
-OCAMLC := @OCAMLC@
-OCAMLOPT := @OCAMLOPT@
-OCAMLDEP := @OCAMLDEP@
-OCAMLDOC := @OCAMLDOC@
-GAS := @GAS@
-POD2HTML := @POD2HTML@
-POD2MAN := @POD2MAN@
-PDFROFF := @PDFROFF@
-RUNTEST := @RUNTEST@
-TCLSH := @TCLSH@
-ZIP := @ZIP@
-
-HAVE_PERL := @HAVE_PERL@
-HAVE_PTHREAD := @HAVE_PTHREAD@
-
-LIBS := @LIBS@
-
-# Targets that we should build
-TARGETS_TO_BUILD=@TARGETS_TO_BUILD@
-
-# Path to location for LLVM C/C++ front-end. You can modify this if you
-# want to override the value set by configure.
-LLVMGCCDIR := @LLVMGCCDIR@
-
-# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
-LLVMGCC := @LLVMGCC@
-LLVMGXX := @LLVMGXX@
-LLVMCC1 := @LLVMCC1@
-LLVMCC1PLUS := @LLVMCC1PLUS@
-LLVMGCC_LANGS := @LLVMGCC_LANGS@
-LLVMGCC_DRAGONEGG := @LLVMGCC_DRAGONEGG@
-
-# Information on Clang, if configured.
-CLANGPATH := @CLANGPATH@
-CLANGXXPATH := @CLANGXXPATH@
-ENABLE_BUILT_CLANG := @ENABLE_BUILT_CLANG@
-
-# The LLVM capable compiler to use.
-LLVMCC_OPTION := @LLVMCC_OPTION@
-
-# The flag used to emit LLVM IR.
-LLVMCC_EMITIR_FLAG = @LLVMCC_EMITIR_FLAG@
-LLVMCC_DISABLEOPT_FLAGS := @LLVMCC_DISABLEOPT_FLAGS@
-
-# Path to directory where object files should be stored during a build.
-# Set OBJ_ROOT to "." if you do not want to use a separate place for
-# object files.
-OBJ_ROOT := .
-
-# What to pass as rpath flag to g++
-RPATH := @RPATH@
-
-# What to pass as -rdynamic flag to g++
-RDYNAMIC := @RDYNAMIC@
-
-# These are options that can either be enabled here, or can be enabled on the
-# make command line (ie, make ENABLE_PROFILING=1):
-
-# When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put
-# into the "Release" directories. Otherwise, LLVM code is not optimized and
-# output is put in the "Debug" directories.
-#ENABLE_OPTIMIZED = 1
-@ENABLE_OPTIMIZED@
-
-# When ENABLE_PROFILING is enabled, profile instrumentation is done
-# and output is put into the "<Flavor>+Profile" directories, where
-# <Flavor> is either Debug or Release depending on how other build
-# flags are set. Otherwise, output is put in the <Flavor>
-# directories.
-#ENABLE_PROFILING = 1
-@ENABLE_PROFILING@
-
-# When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will
-# exclude assertion checks, otherwise they are included.
-#DISABLE_ASSERTIONS = 1
-@DISABLE_ASSERTIONS@
-
-# When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM
-# code will include expensive checks, otherwise they are excluded.
-#ENABLE_EXPENSIVE_CHECKS = 0
-@ENABLE_EXPENSIVE_CHECKS@
-
-# When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug
-# symbols.
-#DEBUG_RUNTIME = 1
-@DEBUG_RUNTIME@
-
-# When DEBUG_SYMBOLS is enabled, the compiler libraries will retain debug
-# symbols.
-#DEBUG_SYMBOLS = 1
-@DEBUG_SYMBOLS@
-
-# The compiler flags to use for optimized builds.
-OPTIMIZE_OPTION := @OPTIMIZE_OPTION@
-
-# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
-# information to allow gprof to be used to get execution frequencies.
-#ENABLE_PROFILING = 1
-
-# When ENABLE_DOCS is disabled, docs/ will not be built.
-ENABLE_DOCS = @ENABLE_DOCS@
-
-# When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built
-ENABLE_DOXYGEN = @ENABLE_DOXYGEN@
-
-# Do we want to enable threads?
-ENABLE_THREADS := @ENABLE_THREADS@
-
-# Do we want to build with position independent code?
-ENABLE_PIC := @ENABLE_PIC@
-
-# Do we want to build a shared library and link the tools with it?
-ENABLE_SHARED := @ENABLE_SHARED@
-
-# Do we want to link the stdc++ into a shared library? (Cygming)
-ENABLE_EMBED_STDCXX := @ENABLE_EMBED_STDCXX@
-
-# Use -fvisibility-inlines-hidden?
-ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@
-
-# Do we want to allow timestamping information into builds?
-ENABLE_TIMESTAMPS := @ENABLE_TIMESTAMPS@
-
-# This option tells the Makefiles to produce verbose output.
-# It essentially prints the commands that make is executing
-#VERBOSE = 1
-
-# Enable JIT for this platform
-TARGET_HAS_JIT = @TARGET_HAS_JIT@
-
-# Environment variable to set to change the runtime shared library search path.
-SHLIBPATH_VAR = @SHLIBPATH_VAR@
-
-# Shared library extension for host platform.
-SHLIBEXT = @SHLIBEXT@
-
-# Executable file extension for host platform.
-EXEEXT = @EXEEXT@
-
-# Things we just assume are "there"
-ECHO := echo
-
-# Get the options for causing archives to link all their content instead of
-# just missing symbols, and the inverse of that. This is used for certain LLVM
-# tools that permit loadable modules. It ensures that the LLVM symbols will be
-# available to those loadable modules.
-LINKALL := @LINKALL@
-NOLINKALL := @NOLINKALL@
-
-# Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending
-# on the check.
-HUGE_VAL_SANITY = @HUGE_VAL_SANITY@
-
-# Bindings that we should build
-BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@
-ALL_BINDINGS := @ALL_BINDINGS@
-OCAML_LIBDIR := @OCAML_LIBDIR@
-
-# When compiling under Mingw/Cygwin, executables such as tblgen
-# expect Windows paths, whereas the build system uses Unix paths.
-# The function SYSPATH transforms Unix paths into Windows paths.
-ifneq (,$(findstring -mno-cygwin, $(CXX)))
- SYSPATH = $(shell echo $(1) | cygpath -m -f -)
-else
- SYSPATH = $(1)
-endif
-
-# Location of the plugin header file for gold.
-BINUTILS_INCDIR := @BINUTILS_INCDIR@
-
-# When ENABLE_LLVMC_DYNAMIC is enabled, LLVMC will link libCompilerDriver
-# dynamically. This is needed to make dynamic plugins work on some targets
-# (Windows).
-ENABLE_LLVMC_DYNAMIC = 0
-#@ENABLE_LLVMC_DYNAMIC@
-
-# When ENABLE_LLVMC_DYNAMIC_PLUGINS is enabled, LLVMC will have dynamic plugin
-# support (via the -load option).
-ENABLE_LLVMC_DYNAMIC_PLUGINS = 1
-#@ENABLE_LLVMC_DYNAMIC_PLUGINS@
-
-# Optional flags supported by the compiler
-# -Wno-missing-field-initializers
-NO_MISSING_FIELD_INITIALIZERS = @NO_MISSING_FIELD_INITIALIZERS@
-# -Wno-variadic-macros
-NO_VARIADIC_MACROS = @NO_VARIADIC_MACROS@
-
-# Was polly found in tools/polly?
-LLVM_HAS_POLLY = @LLVM_HAS_POLLY@
-# Flags supported by the linker.
-# bfd ld / gold --version-script=file
-HAVE_LINK_VERSION_SCRIPT = @HAVE_LINK_VERSION_SCRIPT@