diff options
Diffstat (limited to 'bin/pax/ftree.c')
| -rw-r--r-- | bin/pax/ftree.c | 537 |
1 files changed, 537 insertions, 0 deletions
diff --git a/bin/pax/ftree.c b/bin/pax/ftree.c new file mode 100644 index 000000000000..26df8164bc2d --- /dev/null +++ b/bin/pax/ftree.c @@ -0,0 +1,537 @@ +/*- + * SPDX-License-Identifier: BSD-3-Clause + * + * Copyright (c) 1992 Keith Muller. + * Copyright (c) 1992, 1993 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from software contributed to Berkeley by + * Keith Muller of the University of California, San Diego. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#ifndef lint +#if 0 +static char sccsid[] = "@(#)ftree.c 8.2 (Berkeley) 4/18/94"; +#endif +#endif /* not lint */ +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +#include <sys/types.h> +#include <sys/time.h> +#include <sys/stat.h> +#include <unistd.h> +#include <string.h> +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <fts.h> +#include "pax.h" +#include "ftree.h" +#include "extern.h" + +/* + * routines to interface with the fts library function. + * + * file args supplied to pax are stored on a single linked list (of type FTREE) + * and given to fts to be processed one at a time. pax "selects" files from + * the expansion of each arg into the corresponding file tree (if the arg is a + * directory, otherwise the node itself is just passed to pax). The selection + * is modified by the -n and -u flags. The user is informed when a specific + * file arg does not generate any selected files. -n keeps expanding the file + * tree arg until one of its files is selected, then skips to the next file + * arg. when the user does not supply the file trees as command line args to + * pax, they are read from stdin + */ + +static FTS *ftsp = NULL; /* current FTS handle */ +static int ftsopts; /* options to be used on fts_open */ +static char *farray[2]; /* array for passing each arg to fts */ +static FTREE *fthead = NULL; /* head of linked list of file args */ +static FTREE *fttail = NULL; /* tail of linked list of file args */ +static FTREE *ftcur = NULL; /* current file arg being processed */ +static FTSENT *ftent = NULL; /* current file tree entry */ +static int ftree_skip; /* when set skip to next file arg */ + +static int ftree_arg(void); + +/* + * ftree_start() + * initialize the options passed to fts_open() during this run of pax + * options are based on the selection of pax options by the user + * fts_start() also calls fts_arg() to open the first valid file arg. We + * also attempt to reset directory access times when -t (tflag) is set. + * Return: + * 0 if there is at least one valid file arg to process, -1 otherwise + */ + +int +ftree_start(void) +{ + /* + * Set up the operation mode of fts, open the first file arg. We must + * use FTS_NOCHDIR, as the user may have to open multiple archives and + * if fts did a chdir off into the boondocks, we may create an archive + * volume in a place where the user did not expect to. + */ + ftsopts = FTS_NOCHDIR; + + /* + * optional user flags that effect file traversal + * -H command line symlink follow only (half follow) + * -L follow symlinks (logical) + * -P do not follow symlinks (physical). This is the default. + * -X do not cross over mount points + * -t preserve access times on files read. + * -n select only the first member of a file tree when a match is found + * -d do not extract subtrees rooted at a directory arg. + */ + if (Lflag) + ftsopts |= FTS_LOGICAL; + else + ftsopts |= FTS_PHYSICAL; + if (Hflag) +# ifdef NET2_FTS + paxwarn(0, "The -H flag is not supported on this version"); +# else + ftsopts |= FTS_COMFOLLOW; +# endif + if (Xflag) + ftsopts |= FTS_XDEV; + + if ((fthead == NULL) && ((farray[0] = malloc(PAXPATHLEN+2)) == NULL)) { + paxwarn(1, "Unable to allocate memory for file name buffer"); + return(-1); + } + + if (ftree_arg() < 0) + return(-1); + if (tflag && (atdir_start() < 0)) + return(-1); + return(0); +} + +/* + * ftree_add() + * add the arg to the linked list of files to process. Each will be + * processed by fts one at a time + * Return: + * 0 if added to the linked list, -1 if failed + */ + +int +ftree_add(char *str, int chflg) +{ + FTREE *ft; + int len; + + /* + * simple check for bad args + */ + if ((str == NULL) || (*str == '\0')) { + paxwarn(0, "Invalid file name argument"); + return(-1); + } + + /* + * allocate FTREE node and add to the end of the linked list (args are + * processed in the same order they were passed to pax). Get rid of any + * trailing / the user may pass us. (watch out for / by itself). + */ + if ((ft = (FTREE *)malloc(sizeof(FTREE))) == NULL) { + paxwarn(0, "Unable to allocate memory for filename"); + return(-1); + } + + if (((len = strlen(str) - 1) > 0) && (str[len] == '/')) + str[len] = '\0'; + ft->fname = str; + ft->refcnt = 0; + ft->chflg = chflg; + ft->fow = NULL; + if (fthead == NULL) { + fttail = fthead = ft; + return(0); + } + fttail->fow = ft; + fttail = ft; + return(0); +} + +/* + * ftree_sel() + * this entry has been selected by pax. bump up reference count and handle + * -n and -d processing. + */ + +void +ftree_sel(ARCHD *arcn) +{ + /* + * set reference bit for this pattern. This linked list is only used + * when file trees are supplied pax as args. The list is not used when + * the trees are read from stdin. + */ + if (ftcur != NULL) + ftcur->refcnt = 1; + + /* + * if -n we are done with this arg, force a skip to the next arg when + * pax asks for the next file in next_file(). + * if -d we tell fts only to match the directory (if the arg is a dir) + * and not the entire file tree rooted at that point. + */ + if (nflag) + ftree_skip = 1; + + if (!dflag || (arcn->type != PAX_DIR)) + return; + + if (ftent != NULL) + (void)fts_set(ftsp, ftent, FTS_SKIP); +} + +/* + * ftree_notsel() + * this entry has not been selected by pax. + */ + +void +ftree_notsel(void) +{ + if (ftent != NULL) + (void)fts_set(ftsp, ftent, FTS_SKIP); +} + +/* + * ftree_chk() + * called at end on pax execution. Prints all those file args that did not + * have a selected member (reference count still 0) + */ + +void +ftree_chk(void) +{ + FTREE *ft; + int wban = 0; + + /* + * make sure all dir access times were reset. + */ + if (tflag) + atdir_end(); + + /* + * walk down list and check reference count. Print out those members + * that never had a match + */ + for (ft = fthead; ft != NULL; ft = ft->fow) { + if ((ft->refcnt > 0) || ft->chflg) + continue; + if (wban == 0) { + paxwarn(1,"WARNING! These file names were not selected:"); + ++wban; + } + (void)fprintf(stderr, "%s\n", ft->fname); + } +} + +/* + * ftree_arg() + * Get the next file arg for fts to process. Can be from either the linked + * list or read from stdin when the user did not them as args to pax. Each + * arg is processed until the first successful fts_open(). + * Return: + * 0 when the next arg is ready to go, -1 if out of file args (or EOF on + * stdin). + */ + +static int +ftree_arg(void) +{ + char *pt; + + /* + * close off the current file tree + */ + if (ftsp != NULL) { + (void)fts_close(ftsp); + ftsp = NULL; + } + + /* + * keep looping until we get a valid file tree to process. Stop when we + * reach the end of the list (or get an eof on stdin) + */ + for(;;) { + if (fthead == NULL) { + /* + * the user didn't supply any args, get the file trees + * to process from stdin; + */ + if (fgets(farray[0], PAXPATHLEN+1, stdin) == NULL) + return(-1); + if ((pt = strchr(farray[0], '\n')) != NULL) + *pt = '\0'; + } else { + /* + * the user supplied the file args as arguments to pax + */ + if (ftcur == NULL) + ftcur = fthead; + else if ((ftcur = ftcur->fow) == NULL) + return(-1); + if (ftcur->chflg) { + /* First fchdir() back... */ + if (fchdir(cwdfd) < 0) { + syswarn(1, errno, + "Can't fchdir to starting directory"); + return(-1); + } + if (chdir(ftcur->fname) < 0) { + syswarn(1, errno, "Can't chdir to %s", + ftcur->fname); + return(-1); + } + continue; + } else + farray[0] = ftcur->fname; + } + + /* + * Watch it, fts wants the file arg stored in an array of char + * ptrs, with the last one a null. We use a two element array + * and set farray[0] to point at the buffer with the file name + * in it. We cannot pass all the file args to fts at one shot + * as we need to keep a handle on which file arg generates what + * files (the -n and -d flags need this). If the open is + * successful, return a 0. + */ + if ((ftsp = fts_open(farray, ftsopts, NULL)) != NULL) + break; + } + return(0); +} + +/* + * next_file() + * supplies the next file to process in the supplied archd structure. + * Return: + * 0 when contents of arcn have been set with the next file, -1 when done. + */ + +int +next_file(ARCHD *arcn) +{ + int cnt; + time_t atime; + time_t mtime; + + /* + * ftree_sel() might have set the ftree_skip flag if the user has the + * -n option and a file was selected from this file arg tree. (-n says + * only one member is matched for each pattern) ftree_skip being 1 + * forces us to go to the next arg now. + */ + if (ftree_skip) { + /* + * clear and go to next arg + */ + ftree_skip = 0; + if (ftree_arg() < 0) + return(-1); + } + + /* + * loop until we get a valid file to process + */ + for(;;) { + if ((ftent = fts_read(ftsp)) == NULL) { + /* + * out of files in this tree, go to next arg, if none + * we are done + */ + if (ftree_arg() < 0) + return(-1); + continue; + } + + /* + * handle each type of fts_read() flag + */ + switch(ftent->fts_info) { + case FTS_D: + case FTS_DEFAULT: + case FTS_F: + case FTS_SL: + case FTS_SLNONE: + /* + * these are all ok + */ + break; + case FTS_DP: + /* + * already saw this directory. If the user wants file + * access times reset, we use this to restore the + * access time for this directory since this is the + * last time we will see it in this file subtree + * remember to force the time (this is -t on a read + * directory, not a created directory). + */ +# ifdef NET2_FTS + if (!tflag || (get_atdir(ftent->fts_statb.st_dev, + ftent->fts_statb.st_ino, &mtime, &atime) < 0)) +# else + if (!tflag || (get_atdir(ftent->fts_statp->st_dev, + ftent->fts_statp->st_ino, &mtime, &atime) < 0)) +# endif + continue; + set_ftime(ftent->fts_path, mtime, atime, 1); + continue; + case FTS_DC: + /* + * fts claims a file system cycle + */ + paxwarn(1,"File system cycle found at %s",ftent->fts_path); + continue; + case FTS_DNR: +# ifdef NET2_FTS + syswarn(1, errno, +# else + syswarn(1, ftent->fts_errno, +# endif + "Unable to read directory %s", ftent->fts_path); + continue; + case FTS_ERR: +# ifdef NET2_FTS + syswarn(1, errno, +# else + syswarn(1, ftent->fts_errno, +# endif + "File system traversal error"); + continue; + case FTS_NS: + case FTS_NSOK: +# ifdef NET2_FTS + syswarn(1, errno, +# else + syswarn(1, ftent->fts_errno, +# endif + "Unable to access %s", ftent->fts_path); + continue; + } + + /* + * ok got a file tree node to process. copy info into arcn + * structure (initialize as required) + */ + arcn->skip = 0; + arcn->pad = 0; + arcn->ln_nlen = 0; + arcn->ln_name[0] = '\0'; +# ifdef NET2_FTS + arcn->sb = ftent->fts_statb; +# else + arcn->sb = *(ftent->fts_statp); +# endif + + /* + * file type based set up and copy into the arcn struct + * SIDE NOTE: + * we try to reset the access time on all files and directories + * we may read when the -t flag is specified. files are reset + * when we close them after copying. we reset the directories + * when we are done with their file tree (we also clean up at + * end in case we cut short a file tree traversal). However + * there is no way to reset access times on symlinks. + */ + switch(S_IFMT & arcn->sb.st_mode) { + case S_IFDIR: + arcn->type = PAX_DIR; + if (!tflag) + break; + add_atdir(ftent->fts_path, arcn->sb.st_dev, + arcn->sb.st_ino, arcn->sb.st_mtime, + arcn->sb.st_atime); + break; + case S_IFCHR: + arcn->type = PAX_CHR; + break; + case S_IFBLK: + arcn->type = PAX_BLK; + break; + case S_IFREG: + /* + * only regular files with have data to store on the + * archive. all others will store a zero length skip. + * the skip field is used by pax for actual data it has + * to read (or skip over). + */ + arcn->type = PAX_REG; + arcn->skip = arcn->sb.st_size; + break; + case S_IFLNK: + arcn->type = PAX_SLK; + /* + * have to read the symlink path from the file + */ + if ((cnt = readlink(ftent->fts_path, arcn->ln_name, + PAXPATHLEN - 1)) < 0) { + syswarn(1, errno, "Unable to read symlink %s", + ftent->fts_path); + continue; + } + /* + * set link name length, watch out readlink does not + * always NUL terminate the link path + */ + arcn->ln_name[cnt] = '\0'; + arcn->ln_nlen = cnt; + break; + case S_IFSOCK: + /* + * under BSD storing a socket is senseless but we will + * let the format specific write function make the + * decision of what to do with it. + */ + arcn->type = PAX_SCK; + break; + case S_IFIFO: + arcn->type = PAX_FIF; + break; + } + break; + } + + /* + * copy file name, set file name length + */ + arcn->nlen = l_strncpy(arcn->name, ftent->fts_path, sizeof(arcn->name) - 1); + arcn->name[arcn->nlen] = '\0'; + arcn->org_name = ftent->fts_path; + return(0); +} |