diff options
Diffstat (limited to 'contrib/apr-util/include/private/apr_crypto_internal.h')
| -rw-r--r-- | contrib/apr-util/include/private/apr_crypto_internal.h | 278 |
1 files changed, 278 insertions, 0 deletions
diff --git a/contrib/apr-util/include/private/apr_crypto_internal.h b/contrib/apr-util/include/private/apr_crypto_internal.h new file mode 100644 index 000000000000..5da92e558879 --- /dev/null +++ b/contrib/apr-util/include/private/apr_crypto_internal.h @@ -0,0 +1,278 @@ +/* Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The ASF licenses this file to You under the Apache License, Version 2.0 + * (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef APR_CRYPTO_INTERNAL_H +#define APR_CRYPTO_INTERNAL_H + +#include <stdarg.h> + +#include "apr_crypto.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#if APU_HAVE_CRYPTO + +struct apr_crypto_driver_t { + + /** name */ + const char *name; + + /** + * @brief: allow driver to perform once-only initialisation. + * Called once only. + * @param pool The pool to register the cleanup in. + * @param params Optional init parameter string. + * @param rc Driver-specific additional error code + */ + apr_status_t (*init)(apr_pool_t *pool, const char *params, + const apu_err_t **result); + + /** + * @brief Create a context for supporting encryption. Keys, certificates, + * algorithms and other parameters will be set per context. More than + * one context can be created at one time. A cleanup will be automatically + * registered with the given pool to guarantee a graceful shutdown. + * @param f - context pointer will be written here + * @param provider - provider to use + * @param params - array of key parameters + * @param pool - process pool + * @return APR_ENOENGINE when the engine specified does not exist. APR_EINITENGINE + * if the engine cannot be initialised. + */ + apr_status_t (*make)(apr_crypto_t **f, const apr_crypto_driver_t *provider, + const char *params, apr_pool_t *pool); + + /** + * @brief Get a hash table of key types, keyed by the name of the type against + * an integer pointer constant. + * + * @param types - hashtable of key types keyed to constants. + * @param f - encryption context + * @return APR_SUCCESS for success + */ + apr_status_t (*get_block_key_types)(apr_hash_t **types, + const apr_crypto_t *f); + + /** + * @brief Get a hash table of key modes, keyed by the name of the mode against + * an integer pointer constant. + * + * @param modes - hashtable of key modes keyed to constants. + * @param f - encryption context + * @return APR_SUCCESS for success + */ + apr_status_t (*get_block_key_modes)(apr_hash_t **modes, + const apr_crypto_t *f); + + /** + * @brief Create a key from the given passphrase. By default, the PBKDF2 + * algorithm is used to generate the key from the passphrase. It is expected + * that the same pass phrase will generate the same key, regardless of the + * backend crypto platform used. The key is cleaned up when the context + * is cleaned, and may be reused with multiple encryption or decryption + * operations. + * @note If *key is NULL, a apr_crypto_key_t will be created from a pool. If + * *key is not NULL, *key must point at a previously created structure. + * @param key The key returned, see note. + * @param ivSize The size of the initialisation vector will be returned, based + * on whether an IV is relevant for this type of crypto. + * @param pass The passphrase to use. + * @param passLen The passphrase length in bytes + * @param salt The salt to use. + * @param saltLen The salt length in bytes + * @param type 3DES_192, AES_128, AES_192, AES_256. + * @param mode Electronic Code Book / Cipher Block Chaining. + * @param doPad Pad if necessary. + * @param iterations Iteration count + * @param f The context to use. + * @param p The pool to use. + * @return Returns APR_ENOKEY if the pass phrase is missing or empty, or if a backend + * error occurred while generating the key. APR_ENOCIPHER if the type or mode + * is not supported by the particular backend. APR_EKEYTYPE if the key type is + * not known. APR_EPADDING if padding was requested but is not supported. + * APR_ENOTIMPL if not implemented. + */ + apr_status_t (*passphrase)(apr_crypto_key_t **key, apr_size_t *ivSize, + const char *pass, apr_size_t passLen, const unsigned char * salt, + apr_size_t saltLen, const apr_crypto_block_key_type_e type, + const apr_crypto_block_key_mode_e mode, const int doPad, + const int iterations, const apr_crypto_t *f, apr_pool_t *p); + + /** + * @brief Initialise a context for encrypting arbitrary data using the given key. + * @note If *ctx is NULL, a apr_crypto_block_t will be created from a pool. If + * *ctx is not NULL, *ctx must point at a previously created structure. + * @param ctx The block context returned, see note. + * @param iv Optional initialisation vector. If the buffer pointed to is NULL, + * an IV will be created at random, in space allocated from the pool. + * If the buffer pointed to is not NULL, the IV in the buffer will be + * used. + * @param key The key structure. + * @param blockSize The block size of the cipher. + * @param p The pool to use. + * @return Returns APR_ENOIV if an initialisation vector is required but not specified. + * Returns APR_EINIT if the backend failed to initialise the context. Returns + * APR_ENOTIMPL if not implemented. + */ + apr_status_t (*block_encrypt_init)(apr_crypto_block_t **ctx, + const unsigned char **iv, const apr_crypto_key_t *key, + apr_size_t *blockSize, apr_pool_t *p); + + /** + * @brief Encrypt data provided by in, write it to out. + * @note The number of bytes written will be written to outlen. If + * out is NULL, outlen will contain the maximum size of the + * buffer needed to hold the data, including any data + * generated by apr_crypto_block_encrypt_finish below. If *out points + * to NULL, a buffer sufficiently large will be created from + * the pool provided. If *out points to a not-NULL value, this + * value will be used as a buffer instead. + * @param out Address of a buffer to which data will be written, + * see note. + * @param outlen Length of the output will be written here. + * @param in Address of the buffer to read. + * @param inlen Length of the buffer to read. + * @param ctx The block context to use. + * @return APR_ECRYPT if an error occurred. Returns APR_ENOTIMPL if + * not implemented. + */ + apr_status_t (*block_encrypt)(unsigned char **out, apr_size_t *outlen, + const unsigned char *in, apr_size_t inlen, apr_crypto_block_t *ctx); + + /** + * @brief Encrypt final data block, write it to out. + * @note If necessary the final block will be written out after being + * padded. Typically the final block will be written to the + * same buffer used by apr_crypto_block_encrypt, offset by the + * number of bytes returned as actually written by the + * apr_crypto_block_encrypt() call. After this call, the context + * is cleaned and can be reused by apr_crypto_block_encrypt_init(). + * @param out Address of a buffer to which data will be written. This + * buffer must already exist, and is usually the same + * buffer used by apr_evp_crypt(). See note. + * @param outlen Length of the output will be written here. + * @param ctx The block context to use. + * @return APR_ECRYPT if an error occurred. + * @return APR_EPADDING if padding was enabled and the block was incorrectly + * formatted. + * @return APR_ENOTIMPL if not implemented. + */ + apr_status_t (*block_encrypt_finish)(unsigned char *out, + apr_size_t *outlen, apr_crypto_block_t *ctx); + + /** + * @brief Initialise a context for decrypting arbitrary data using the given key. + * @note If *ctx is NULL, a apr_crypto_block_t will be created from a pool. If + * *ctx is not NULL, *ctx must point at a previously created structure. + * @param ctx The block context returned, see note. + * @param blockSize The block size of the cipher. + * @param iv Optional initialisation vector. If the buffer pointed to is NULL, + * an IV will be created at random, in space allocated from the pool. + * If the buffer is not NULL, the IV in the buffer will be used. + * @param key The key structure. + * @param p The pool to use. + * @return Returns APR_ENOIV if an initialisation vector is required but not specified. + * Returns APR_EINIT if the backend failed to initialise the context. Returns + * APR_ENOTIMPL if not implemented. + */ + apr_status_t (*block_decrypt_init)(apr_crypto_block_t **ctx, + apr_size_t *blockSize, const unsigned char *iv, + const apr_crypto_key_t *key, apr_pool_t *p); + + /** + * @brief Decrypt data provided by in, write it to out. + * @note The number of bytes written will be written to outlen. If + * out is NULL, outlen will contain the maximum size of the + * buffer needed to hold the data, including any data + * generated by apr_crypto_block_decrypt_finish below. If *out points + * to NULL, a buffer sufficiently large will be created from + * the pool provided. If *out points to a not-NULL value, this + * value will be used as a buffer instead. + * @param out Address of a buffer to which data will be written, + * see note. + * @param outlen Length of the output will be written here. + * @param in Address of the buffer to read. + * @param inlen Length of the buffer to read. + * @param ctx The block context to use. + * @return APR_ECRYPT if an error occurred. Returns APR_ENOTIMPL if + * not implemented. + */ + apr_status_t (*block_decrypt)(unsigned char **out, apr_size_t *outlen, + const unsigned char *in, apr_size_t inlen, apr_crypto_block_t *ctx); + + /** + * @brief Decrypt final data block, write it to out. + * @note If necessary the final block will be written out after being + * padded. Typically the final block will be written to the + * same buffer used by apr_crypto_block_decrypt, offset by the + * number of bytes returned as actually written by the + * apr_crypto_block_decrypt() call. After this call, the context + * is cleaned and can be reused by apr_crypto_block_decrypt_init(). + * @param out Address of a buffer to which data will be written. This + * buffer must already exist, and is usually the same + * buffer used by apr_evp_crypt(). See note. + * @param outlen Length of the output will be written here. + * @param ctx The block context to use. + * @return APR_ECRYPT if an error occurred. + * @return APR_EPADDING if padding was enabled and the block was incorrectly + * formatted. + * @return APR_ENOTIMPL if not implemented. + */ + apr_status_t (*block_decrypt_finish)(unsigned char *out, + apr_size_t *outlen, apr_crypto_block_t *ctx); + + /** + * @brief Clean encryption / decryption context. + * @note After cleanup, a context is free to be reused if necessary. + * @param ctx The block context to use. + * @return Returns APR_ENOTIMPL if not supported. + */ + apr_status_t (*block_cleanup)(apr_crypto_block_t *ctx); + + /** + * @brief Clean encryption / decryption context. + * @note After cleanup, a context is free to be reused if necessary. + * @param f The context to use. + * @return Returns APR_ENOTIMPL if not supported. + */ + apr_status_t (*cleanup)(apr_crypto_t *f); + + /** + * @brief Clean encryption / decryption context. + * @note After cleanup, a context is free to be reused if necessary. + * @return Returns APR_ENOTIMPL if not supported. + */ + apr_status_t (*shutdown)(void); + + /** + * @brief: fetch the most recent error from this driver. + * @param result - the result structure + * @param f - context pointer + * @return APR_SUCCESS for success. + */ + apr_status_t (*error)(const apu_err_t **result, const apr_crypto_t *f); + +}; + +#endif + +#ifdef __cplusplus +} +#endif + +#endif |