diff options
Diffstat (limited to 'contrib/gperf')
45 files changed, 0 insertions, 5834 deletions
diff --git a/contrib/gperf/Makefile.in b/contrib/gperf/Makefile.in deleted file mode 100644 index 1d9336afa8a9..000000000000 --- a/contrib/gperf/Makefile.in +++ /dev/null @@ -1,62 +0,0 @@ -# Makefile for gperf - -# Copyright (C) 1989, 1992, 1993, 1998 Free Software Foundation, Inc. -# written by Douglas C. Schmidt (schmidt@ics.uci.edu) -# -# This file is part of GNU GPERF. -# -# GNU GPERF is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 1, or (at your option) -# any later version. -# -# GNU GPERF is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU GPERF; see the file COPYING. If not, write to -# Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -#### Start of system configuration section. #### - -# Programs used by "make": -RM = rm -f -@SET_MAKE@ - -#### End of system configuration section. #### - -SHELL = /bin/sh - -all : force - cd @subdir@; $(MAKE) all - -install : force - cd @subdir@; $(MAKE) install - -installdirs : force - cd @subdir@; $(MAKE) installdirs - -uninstall : force - cd @subdir@; $(MAKE) uninstall - -check : force - cd @subdir@; $(MAKE) check - -mostlyclean : force - cd @subdir@; $(MAKE) mostlyclean - -clean : force - cd @subdir@; $(MAKE) clean - -distclean : force - cd @subdir@; if test -f Makefile; then $(MAKE) distclean; fi - $(RM) config.status config.log config.cache Makefile - -maintainer-clean : force - cd @subdir@; if test -f Makefile; then $(MAKE) maintainer-clean; fi - $(RM) config.status config.log config.cache Makefile - -force : - diff --git a/contrib/gperf/acconfig.h b/contrib/gperf/acconfig.h deleted file mode 100644 index cd040d450f7e..000000000000 --- a/contrib/gperf/acconfig.h +++ /dev/null @@ -1,4 +0,0 @@ - -/* Define if the C++ compiler supports "throw ()" declarations. */ -#undef HAVE_THROW_DECL - diff --git a/contrib/gperf/configure.in b/contrib/gperf/configure.in deleted file mode 100644 index 5ac1499aa124..000000000000 --- a/contrib/gperf/configure.in +++ /dev/null @@ -1,46 +0,0 @@ -dnl autoconf configuration for gperf - -dnl Copyright (C) 1998 Free Software Foundation, Inc. -dnl written by Douglas C. Schmidt (schmidt@ics.uci.edu) -dnl -dnl This file is part of GNU GPERF. -dnl -dnl GNU GPERF is free software; you can redistribute it and/or modify -dnl it under the terms of the GNU General Public License as published by -dnl the Free Software Foundation; either version 1, or (at your option) -dnl any later version. -dnl -dnl GNU GPERF is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -dnl GNU General Public License for more details. -dnl -dnl You should have received a copy of the GNU General Public License -dnl along with GNU GPERF; see the file COPYING. If not, write to the -dnl Free Software Foundation, 59 Temple Place - Suite 330, Boston, -dnl MA 02111-1307, USA. - -AC_INIT(doc/gperf.1) -AC_PROG_MAKE_SET -dnl This piece of sed script replaces every line containing '@subdir@' -dnl by several consecutive lines, each referencing one subdir. -extrasub="$extrasub"' -/@subdir@/{ -h -g -s/@subdir@/lib/ -p -g -s/@subdir@/src/ -p -g -s/@subdir@/tests/ -p -g -s/@subdir@/doc/ -p -d -} -' -AC_OUTPUT(Makefile) -AC_OUTPUT_SUBDIRS(lib src tests doc) diff --git a/contrib/gperf/lib/Makefile.in b/contrib/gperf/lib/Makefile.in deleted file mode 100644 index 3b1ee9dd3420..000000000000 --- a/contrib/gperf/lib/Makefile.in +++ /dev/null @@ -1,109 +0,0 @@ -# Makefile for gperf/lib - -# Copyright (C) 1989, 1992, 1993, 1998 Free Software Foundation, Inc. -# written by Douglas C. Schmidt (schmidt@ics.uci.edu) -# -# This file is part of GNU GPERF. -# -# GNU GPERF is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 1, or (at your option) -# any later version. -# -# GNU GPERF is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU GPERF; see the file COPYING. If not, write to the Free -# Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. - -#### Start of system configuration section. #### - -# Directories used by "make": -srcdir = @srcdir@ - -# Directories used by "make install": -prefix = @prefix@ -local_prefix = /usr/local -exec_prefix = @exec_prefix@ - -# Programs used by "make": -# C compiler -CC = @CC@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -# C++ compiler -CXX = @CXX@ -CXXFLAGS = @CXXFLAGS@ -CXXCPP = @CXXCPP@ -# Other -AR = ar -AR_FLAGS = rc -RANLIB = @RANLIB@ -MV = mv -LN = ln -RM = rm -f -@SET_MAKE@ - -# Programs used by "make install": -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ - -#### End of system configuration section. #### - -SHELL = /bin/sh - -VPATH = $(srcdir) - -OBJECTS = getopt.o getopt1.o hash.o -CPPFLAGS = -I$(srcdir) - -TARGETLIB = libgp.a - -all : $(TARGETLIB) - -$(TARGETLIB): $(OBJECTS) - $(RM) $@ - $(AR) $(AR_FLAGS) $@ $(OBJECTS) - $(RANLIB) $@ - -# Don't use implicit rules, since AIX "make" and OSF/1 "make" don't always -# expand $< correctly in this context. -# -#%.o : %.c -# $(CC) $(CFLAGS) $(CPPFLAGS) -c $< -# -#%.o : %.cc -# $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c $< - -getopt.o : getopt.c getopt.h - $(CC) $(CFLAGS) $(CPPFLAGS) -c $(srcdir)/getopt.c - -getopt1.o : getopt1.c getopt.h - $(CC) $(CFLAGS) $(CPPFLAGS) -c $(srcdir)/getopt1.c - -hash.o : hash.cc hash.h - $(CXX) $(CXXFLAGS) $(CPPFLAGS) -c $(srcdir)/hash.cc - -install : all - -installdirs : - -uninstall : - -check : all - -mostlyclean : clean - -clean : force - $(RM) *~ *.s *.o *.a $(TARGETLIB) core - -distclean : clean - $(RM) config.status config.log config.cache Makefile - -maintainer-clean : distclean - -force : diff --git a/contrib/gperf/lib/configure.in b/contrib/gperf/lib/configure.in deleted file mode 100644 index 98266a1239f6..000000000000 --- a/contrib/gperf/lib/configure.in +++ /dev/null @@ -1,43 +0,0 @@ -dnl autoconf configuration for gperf/lib - -dnl Copyright (C) 1998 Free Software Foundation, Inc. -dnl written by Douglas C. Schmidt (schmidt@ics.uci.edu) -dnl -dnl This file is part of GNU GPERF. -dnl -dnl GNU GPERF is free software; you can redistribute it and/or modify -dnl it under the terms of the GNU General Public License as published by -dnl the Free Software Foundation; either version 1, or (at your option) -dnl any later version. -dnl -dnl GNU GPERF is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -dnl GNU General Public License for more details. -dnl -dnl You should have received a copy of the GNU General Public License -dnl along with GNU GPERF; see the file COPYING. If not, write to the -dnl Free Software Foundation, 59 Temple Place - Suite 330, Boston, -dnl MA 02111-1307, USA. - -AC_INIT(hash.cc) -AC_PROG_MAKE_SET -dnl -dnl checks for programs -dnl -AC_PROG_CC - dnl sets variable CC -AC_PROG_CPP - dnl sets variable CPP -AC_PROG_CXX - dnl sets variable CXX -AC_PROG_CXXCPP - dnl sets variable CXXCPP -CL_PROG_RANLIB - dnl sets variable RANLIB -CL_PROG_INSTALL - dnl sets variables INSTALL, INSTALL_DATA, INSTALL_PROGRAM -dnl -dnl That's it. -dnl -AC_OUTPUT(Makefile) diff --git a/contrib/gperf/lib/getopt.c b/contrib/gperf/lib/getopt.c deleted file mode 100644 index 2341d04b22be..000000000000 --- a/contrib/gperf/lib/getopt.c +++ /dev/null @@ -1,1042 +0,0 @@ -/* Getopt for GNU. - NOTE: getopt is now part of the C library, so if you don't know what - "Keep this file name-space clean" means, talk to drepper@gnu.org - before changing it! - - Copyright (C) 1987, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98 - Free Software Foundation, Inc. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with the GNU C Library; see the file COPYING.LIB. If not, - write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -/* This tells Alpha OSF/1 not to define a getopt prototype in <stdio.h>. - Ditto for AIX 3.2 and <stdlib.h>. */ -#ifndef _NO_PROTO -#define _NO_PROTO -#endif - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif - -#if !defined __STDC__ || !__STDC__ -/* This is a separate conditional since some stdc systems - reject `defined (const)'. */ -#ifndef const -#define const -#endif -#endif - -#include <stdio.h> - -/* Comment out all this code if we are using the GNU C Library, and are not - actually compiling the library itself. This code is part of the GNU C - Library, but also included in many other GNU distributions. Compiling - and linking in this code is a waste when using the GNU C library - (especially if it is a shared library). Rather than having every GNU - program understand `configure --with-gnu-libc' and omit the object files, - it is simpler to just do this in the source for each such file. */ - -#define GETOPT_INTERFACE_VERSION 2 -#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2 -#include <gnu-versions.h> -#if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION -#define ELIDE_CODE -#endif -#endif - -#ifndef ELIDE_CODE - - -/* This needs to come after some library #include - to get __GNU_LIBRARY__ defined. */ -#ifdef __GNU_LIBRARY__ -/* Don't include stdlib.h for non-GNU C libraries because some of them - contain conflicting prototypes for getopt. */ -#include <stdlib.h> -#include <unistd.h> -#endif /* GNU C library. */ - -#ifdef VMS -#include <unixlib.h> -#if HAVE_STRING_H - 0 -#include <string.h> -#endif -#endif - -#ifndef _ -/* This is for other GNU distributions with internationalized messages. - When compiling libc, the _ macro is predefined. */ -#ifdef HAVE_LIBINTL_H -# include <libintl.h> -# define _(msgid) gettext (msgid) -#else -# define _(msgid) (msgid) -#endif -#endif - -/* This version of `getopt' appears to the caller like standard Unix `getopt' - but it behaves differently for the user, since it allows the user - to intersperse the options with the other arguments. - - As `getopt' works, it permutes the elements of ARGV so that, - when it is done, all the options precede everything else. Thus - all application programs are extended to handle flexible argument order. - - Setting the environment variable POSIXLY_CORRECT disables permutation. - Then the behavior is completely standard. - - GNU application programs can use a third alternative mode in which - they can distinguish the relative order of options and other arguments. */ - -#include "getopt.h" - -/* For communication from `getopt' to the caller. - When `getopt' finds an option that takes an argument, - the argument value is returned here. - Also, when `ordering' is RETURN_IN_ORDER, - each non-option ARGV-element is returned here. */ - -char *optarg = NULL; - -/* Index in ARGV of the next element to be scanned. - This is used for communication to and from the caller - and for communication between successive calls to `getopt'. - - On entry to `getopt', zero means this is the first call; initialize. - - When `getopt' returns -1, this is the index of the first of the - non-option elements that the caller should itself scan. - - Otherwise, `optind' communicates from one call to the next - how much of ARGV has been scanned so far. */ - -/* 1003.2 says this must be 1 before any call. */ -int optind = 1; - -/* Formerly, initialization of getopt depended on optind==0, which - causes problems with re-calling getopt as programs generally don't - know that. */ - -int __getopt_initialized = 0; - -/* The next char to be scanned in the option-element - in which the last option character we returned was found. - This allows us to pick up the scan where we left off. - - If this is zero, or a null string, it means resume the scan - by advancing to the next ARGV-element. */ - -static char *nextchar; - -/* Callers store zero here to inhibit the error message - for unrecognized options. */ - -int opterr = 1; - -/* Set to an option character which was unrecognized. - This must be initialized on some systems to avoid linking in the - system's own getopt implementation. */ - -int optopt = '?'; - -/* Describe how to deal with options that follow non-option ARGV-elements. - - If the caller did not specify anything, - the default is REQUIRE_ORDER if the environment variable - POSIXLY_CORRECT is defined, PERMUTE otherwise. - - REQUIRE_ORDER means don't recognize them as options; - stop option processing when the first non-option is seen. - This is what Unix does. - This mode of operation is selected by either setting the environment - variable POSIXLY_CORRECT, or using `+' as the first character - of the list of option characters. - - PERMUTE is the default. We permute the contents of ARGV as we scan, - so that eventually all the non-options are at the end. This allows options - to be given in any order, even with programs that were not written to - expect this. - - RETURN_IN_ORDER is an option available to programs that were written - to expect options and other ARGV-elements in any order and that care about - the ordering of the two. We describe each non-option ARGV-element - as if it were the argument of an option with character code 1. - Using `-' as the first character of the list of option characters - selects this mode of operation. - - The special argument `--' forces an end of option-scanning regardless - of the value of `ordering'. In the case of RETURN_IN_ORDER, only - `--' can cause `getopt' to return -1 with `optind' != ARGC. */ - -static enum -{ - REQUIRE_ORDER, PERMUTE, RETURN_IN_ORDER -} ordering; - -/* Value of POSIXLY_CORRECT environment variable. */ -static char *posixly_correct; - -#ifdef __GNU_LIBRARY__ -/* We want to avoid inclusion of string.h with non-GNU libraries - because there are many ways it can cause trouble. - On some systems, it contains special magic macros that don't work - in GCC. */ -#include <string.h> -#define my_index strchr -#else - -/* Avoid depending on library functions or files - whose names are inconsistent. */ - -extern char *getenv (); -extern int strncmp (); - -static char * -my_index (str, chr) - const char *str; - int chr; -{ - while (*str) - { - if (*str == chr) - return (char *) str; - str++; - } - return 0; -} - -/* If using GCC, we can safely declare strlen this way. - If not using GCC, it is ok not to declare it. */ -#ifdef __GNUC__ -/* Note that Motorola Delta 68k R3V7 comes with GCC but not stddef.h. - That was relevant to code that was here before. */ -#if !defined __STDC__ || !__STDC__ -/* gcc with -traditional declares the built-in strlen to return int, - and has done so at least since version 2.4.5. -- rms. */ -extern int strlen (const char *); -#endif /* not __STDC__ */ -#endif /* __GNUC__ */ - -#endif /* not __GNU_LIBRARY__ */ - -/* Handle permutation of arguments. */ - -/* Describe the part of ARGV that contains non-options that have - been skipped. `first_nonopt' is the index in ARGV of the first of them; - `last_nonopt' is the index after the last of them. */ - -static int first_nonopt; -static int last_nonopt; - -#ifdef _LIBC -/* Bash 2.0 gives us an environment variable containing flags - indicating ARGV elements that should not be considered arguments. */ - -/* Defined in getopt_init.c */ -extern char *__getopt_nonoption_flags; - -static int nonoption_flags_max_len; -static int nonoption_flags_len; - -static int original_argc; -static char *const *original_argv; - -/* Make sure the environment variable bash 2.0 puts in the environment - is valid for the getopt call we must make sure that the ARGV passed - to getopt is that one passed to the process. */ -static void -__attribute__ ((unused)) -store_args_and_env (int argc, char *const *argv) -{ - /* XXX This is no good solution. We should rather copy the args so - that we can compare them later. But we must not use malloc(3). */ - original_argc = argc; - original_argv = argv; -} -# ifdef text_set_element -text_set_element (__libc_subinit, store_args_and_env); -# endif /* text_set_element */ - -# define SWAP_FLAGS(ch1, ch2) \ - if (nonoption_flags_len > 0) \ - { \ - char __tmp = __getopt_nonoption_flags[ch1]; \ - __getopt_nonoption_flags[ch1] = __getopt_nonoption_flags[ch2]; \ - __getopt_nonoption_flags[ch2] = __tmp; \ - } -#else /* !_LIBC */ -# define SWAP_FLAGS(ch1, ch2) -#endif /* _LIBC */ - -/* Exchange two adjacent subsequences of ARGV. - One subsequence is elements [first_nonopt,last_nonopt) - which contains all the non-options that have been skipped so far. - The other is elements [last_nonopt,optind), which contains all - the options processed since those non-options were skipped. - - `first_nonopt' and `last_nonopt' are relocated so that they describe - the new indices of the non-options in ARGV after they are moved. */ - -#if defined __STDC__ && __STDC__ -static void exchange (char **); -#endif - -static void -exchange (argv) - char **argv; -{ - int bottom = first_nonopt; - int middle = last_nonopt; - int top = optind; - char *tem; - - /* Exchange the shorter segment with the far end of the longer segment. - That puts the shorter segment into the right place. - It leaves the longer segment in the right place overall, - but it consists of two parts that need to be swapped next. */ - -#ifdef _LIBC - /* First make sure the handling of the `__getopt_nonoption_flags' - string can work normally. Our top argument must be in the range - of the string. */ - if (nonoption_flags_len > 0 && top >= nonoption_flags_max_len) - { - /* We must extend the array. The user plays games with us and - presents new arguments. */ - char *new_str = malloc (top + 1); - if (new_str == NULL) - nonoption_flags_len = nonoption_flags_max_len = 0; - else - { - memset (__mempcpy (new_str, __getopt_nonoption_flags, - nonoption_flags_max_len), - '\0', top + 1 - nonoption_flags_max_len); - nonoption_flags_max_len = top + 1; - __getopt_nonoption_flags = new_str; - } - } -#endif - - while (top > middle && middle > bottom) - { - if (top - middle > middle - bottom) - { - /* Bottom segment is the short one. */ - int len = middle - bottom; - register int i; - - /* Swap it with the top part of the top segment. */ - for (i = 0; i < len; i++) - { - tem = argv[bottom + i]; - argv[bottom + i] = argv[top - (middle - bottom) + i]; - argv[top - (middle - bottom) + i] = tem; - SWAP_FLAGS (bottom + i, top - (middle - bottom) + i); - } - /* Exclude the moved bottom segment from further swapping. */ - top -= len; - } - else - { - /* Top segment is the short one. */ - int len = top - middle; - register int i; - - /* Swap it with the bottom part of the bottom segment. */ - for (i = 0; i < len; i++) - { - tem = argv[bottom + i]; - argv[bottom + i] = argv[middle + i]; - argv[middle + i] = tem; - SWAP_FLAGS (bottom + i, middle + i); - } - /* Exclude the moved top segment from further swapping. */ - bottom += len; - } - } - - /* Update records for the slots the non-options now occupy. */ - - first_nonopt += (optind - last_nonopt); - last_nonopt = optind; -} - -/* Initialize the internal data when the first call is made. */ - -#if defined __STDC__ && __STDC__ -static const char *_getopt_initialize (int, char *const *, const char *); -#endif -static const char * -_getopt_initialize (argc, argv, optstring) - int argc; - char *const *argv; - const char *optstring; -{ - /* Start processing options with ARGV-element 1 (since ARGV-element 0 - is the program name); the sequence of previously skipped - non-option ARGV-elements is empty. */ - - first_nonopt = last_nonopt = optind; - - nextchar = NULL; - - posixly_correct = getenv ("POSIXLY_CORRECT"); - - /* Determine how to handle the ordering of options and nonoptions. */ - - if (optstring[0] == '-') - { - ordering = RETURN_IN_ORDER; - ++optstring; - } - else if (optstring[0] == '+') - { - ordering = REQUIRE_ORDER; - ++optstring; - } - else if (posixly_correct != NULL) - ordering = REQUIRE_ORDER; - else - ordering = PERMUTE; - -#ifdef _LIBC - if (posixly_correct == NULL - && argc == original_argc && argv == original_argv) - { - if (nonoption_flags_max_len == 0) - { - if (__getopt_nonoption_flags == NULL - || __getopt_nonoption_flags[0] == '\0') - nonoption_flags_max_len = -1; - else - { - const char *orig_str = __getopt_nonoption_flags; - int len = nonoption_flags_max_len = strlen (orig_str); - if (nonoption_flags_max_len < argc) - nonoption_flags_max_len = argc; - __getopt_nonoption_flags = - (char *) malloc (nonoption_flags_max_len); - if (__getopt_nonoption_flags == NULL) - nonoption_flags_max_len = -1; - else - memset (__mempcpy (__getopt_nonoption_flags, orig_str, len), - '\0', nonoption_flags_max_len - len); - } - } - nonoption_flags_len = nonoption_flags_max_len; - } - else - nonoption_flags_len = 0; -#endif - - return optstring; -} - -/* Scan elements of ARGV (whose length is ARGC) for option characters - given in OPTSTRING. - - If an element of ARGV starts with '-', and is not exactly "-" or "--", - then it is an option element. The characters of this element - (aside from the initial '-') are option characters. If `getopt' - is called repeatedly, it returns successively each of the option characters - from each of the option elements. - - If `getopt' finds another option character, it returns that character, - updating `optind' and `nextchar' so that the next call to `getopt' can - resume the scan with the following option character or ARGV-element. - - If there are no more option characters, `getopt' returns -1. - Then `optind' is the index in ARGV of the first ARGV-element - that is not an option. (The ARGV-elements have been permuted - so that those that are not options now come last.) - - OPTSTRING is a string containing the legitimate option characters. - If an option character is seen that is not listed in OPTSTRING, - return '?' after printing an error message. If you set `opterr' to - zero, the error message is suppressed but we still return '?'. - - If a char in OPTSTRING is followed by a colon, that means it wants an arg, - so the following text in the same ARGV-element, or the text of the following - ARGV-element, is returned in `optarg'. Two colons mean an option that - wants an optional arg; if there is text in the current ARGV-element, - it is returned in `optarg', otherwise `optarg' is set to zero. - - If OPTSTRING starts with `-' or `+', it requests different methods of - handling the non-option ARGV-elements. - See the comments about RETURN_IN_ORDER and REQUIRE_ORDER, above. - - Long-named options begin with `--' instead of `-'. - Their names may be abbreviated as long as the abbreviation is unique - or is an exact match for some defined option. If they have an - argument, it follows the option name in the same ARGV-element, separated - from the option name by a `=', or else the in next ARGV-element. - When `getopt' finds a long-named option, it returns 0 if that option's - `flag' field is nonzero, the value of the option's `val' field - if the `flag' field is zero. - - The elements of ARGV aren't really const, because we permute them. - But we pretend they're const in the prototype to be compatible - with other systems. - - LONGOPTS is a vector of `struct option' terminated by an - element containing a name which is zero. - - LONGIND returns the index in LONGOPT of the long-named option found. - It is only valid when a long-named option has been found by the most - recent call. - - If LONG_ONLY is nonzero, '-' as well as '--' can introduce - long-named options. */ - -int -_getopt_internal (argc, argv, optstring, longopts, longind, long_only) - int argc; - char *const *argv; - const char *optstring; - const struct option *longopts; - int *longind; - int long_only; -{ - optarg = NULL; - - if (optind == 0 || !__getopt_initialized) - { - if (optind == 0) - optind = 1; /* Don't scan ARGV[0], the program name. */ - optstring = _getopt_initialize (argc, argv, optstring); - __getopt_initialized = 1; - } - - /* Test whether ARGV[optind] points to a non-option argument. - Either it does not have option syntax, or there is an environment flag - from the shell indicating it is not an option. The later information - is only used when the used in the GNU libc. */ -#ifdef _LIBC -#define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0' \ - || (optind < nonoption_flags_len \ - && __getopt_nonoption_flags[optind] == '1')) -#else -#define NONOPTION_P (argv[optind][0] != '-' || argv[optind][1] == '\0') -#endif - - if (nextchar == NULL || *nextchar == '\0') - { - /* Advance to the next ARGV-element. */ - - /* Give FIRST_NONOPT & LAST_NONOPT rational values if OPTIND has been - moved back by the user (who may also have changed the arguments). */ - if (last_nonopt > optind) - last_nonopt = optind; - if (first_nonopt > optind) - first_nonopt = optind; - - if (ordering == PERMUTE) - { - /* If we have just processed some options following some non-options, - exchange them so that the options come first. */ - - if (first_nonopt != last_nonopt && last_nonopt != optind) - exchange ((char **) argv); - else if (last_nonopt != optind) - first_nonopt = optind; - - /* Skip any additional non-options - and extend the range of non-options previously skipped. */ - - while (optind < argc && NONOPTION_P) - optind++; - last_nonopt = optind; - } - - /* The special ARGV-element `--' means premature end of options. - Skip it like a null option, - then exchange with previous non-options as if it were an option, - then skip everything else like a non-option. */ - - if (optind != argc && !strcmp (argv[optind], "--")) - { - optind++; - - if (first_nonopt != last_nonopt && last_nonopt != optind) - exchange ((char **) argv); - else if (first_nonopt == last_nonopt) - first_nonopt = optind; - last_nonopt = argc; - - optind = argc; - } - - /* If we have done all the ARGV-elements, stop the scan - and back over any non-options that we skipped and permuted. */ - - if (optind == argc) - { - /* Set the next-arg-index to point at the non-options - that we previously skipped, so the caller will digest them. */ - if (first_nonopt != last_nonopt) - optind = first_nonopt; - return -1; - } - - /* If we have come to a non-option and did not permute it, - either stop the scan or describe it to the caller and pass it by. */ - - if (NONOPTION_P) - { - if (ordering == REQUIRE_ORDER) - return -1; - optarg = argv[optind++]; - return 1; - } - - /* We have found another option-ARGV-element. - Skip the initial punctuation. */ - - nextchar = (argv[optind] + 1 - + (longopts != NULL && argv[optind][1] == '-')); - } - - /* Decode the current option-ARGV-element. */ - - /* Check whether the ARGV-element is a long option. - - If long_only and the ARGV-element has the form "-f", where f is - a valid short option, don't consider it an abbreviated form of - a long option that starts with f. Otherwise there would be no - way to give the -f short option. - - On the other hand, if there's a long option "fubar" and - the ARGV-element is "-fu", do consider that an abbreviation of - the long option, just like "--fu", and not "-f" with arg "u". - - This distinction seems to be the most useful approach. */ - - if (longopts != NULL - && (argv[optind][1] == '-' - || (long_only && (argv[optind][2] || !my_index (optstring, argv[optind][1]))))) - { - char *nameend; - const struct option *p; - const struct option *pfound = NULL; - int exact = 0; - int ambig = 0; - int indfound = -1; - int option_index; - - for (nameend = nextchar; *nameend && *nameend != '='; nameend++) - /* Do nothing. */ ; - - /* Test all long options for either exact match - or abbreviated matches. */ - for (p = longopts, option_index = 0; p->name; p++, option_index++) - if (!strncmp (p->name, nextchar, nameend - nextchar)) - { - if ((unsigned int) (nameend - nextchar) - == (unsigned int) strlen (p->name)) - { - /* Exact match found. */ - pfound = p; - indfound = option_index; - exact = 1; - break; - } - else if (pfound == NULL) - { - /* First nonexact match found. */ - pfound = p; - indfound = option_index; - } - else - /* Second or later nonexact match found. */ - ambig = 1; - } - - if (ambig && !exact) - { - if (opterr) - fprintf (stderr, _("%s: option `%s' is ambiguous\n"), - argv[0], argv[optind]); - nextchar += strlen (nextchar); - optind++; - optopt = 0; - return '?'; - } - - if (pfound != NULL) - { - option_index = indfound; - optind++; - if (*nameend) - { - /* Don't test has_arg with >, because some C compilers don't - allow it to be used on enums. */ - if (pfound->has_arg) - optarg = nameend + 1; - else - { - if (opterr) - if (argv[optind - 1][1] == '-') - /* --option */ - fprintf (stderr, - _("%s: option `--%s' doesn't allow an argument\n"), - argv[0], pfound->name); - else - /* +option or -option */ - fprintf (stderr, - _("%s: option `%c%s' doesn't allow an argument\n"), - argv[0], argv[optind - 1][0], pfound->name); - - nextchar += strlen (nextchar); - - optopt = pfound->val; - return '?'; - } - } - else if (pfound->has_arg == 1) - { - if (optind < argc) - optarg = argv[optind++]; - else - { - if (opterr) - fprintf (stderr, - _("%s: option `%s' requires an argument\n"), - argv[0], argv[optind - 1]); - nextchar += strlen (nextchar); - optopt = pfound->val; - return optstring[0] == ':' ? ':' : '?'; - } - } - nextchar += strlen (nextchar); - if (longind != NULL) - *longind = option_index; - if (pfound->flag) - { - *(pfound->flag) = pfound->val; - return 0; - } - return pfound->val; - } - - /* Can't find it as a long option. If this is not getopt_long_only, - or the option starts with '--' or is not a valid short - option, then it's an error. - Otherwise interpret it as a short option. */ - if (!long_only || argv[optind][1] == '-' - || my_index (optstring, *nextchar) == NULL) - { - if (opterr) - { - if (argv[optind][1] == '-') - /* --option */ - fprintf (stderr, _("%s: unrecognized option `--%s'\n"), - argv[0], nextchar); - else - /* +option or -option */ - fprintf (stderr, _("%s: unrecognized option `%c%s'\n"), - argv[0], argv[optind][0], nextchar); - } - nextchar = (char *) ""; - optind++; - optopt = 0; - return '?'; - } - } - - /* Look at and handle the next short option-character. */ - - { - char c = *nextchar++; - char *temp = my_index (optstring, c); - - /* Increment `optind' when we start to process its last character. */ - if (*nextchar == '\0') - ++optind; - - if (temp == NULL || c == ':') - { - if (opterr) - { - if (posixly_correct) - /* 1003.2 specifies the format of this message. */ - fprintf (stderr, _("%s: illegal option -- %c\n"), - argv[0], c); - else - fprintf (stderr, _("%s: invalid option -- %c\n"), - argv[0], c); - } - optopt = c; - return '?'; - } - /* Convenience. Treat POSIX -W foo same as long option --foo */ - if (temp[0] == 'W' && temp[1] == ';') - { - char *nameend; - const struct option *p; - const struct option *pfound = NULL; - int exact = 0; - int ambig = 0; - int indfound = 0; - int option_index; - - /* This is an option that requires an argument. */ - if (*nextchar != '\0') - { - optarg = nextchar; - /* If we end this ARGV-element by taking the rest as an arg, - we must advance to the next element now. */ - optind++; - } - else if (optind == argc) - { - if (opterr) - { - /* 1003.2 specifies the format of this message. */ - fprintf (stderr, _("%s: option requires an argument -- %c\n"), - argv[0], c); - } - optopt = c; - if (optstring[0] == ':') - c = ':'; - else - c = '?'; - return c; - } - else - /* We already incremented `optind' once; - increment it again when taking next ARGV-elt as argument. */ - optarg = argv[optind++]; - - /* optarg is now the argument, see if it's in the - table of longopts. */ - - for (nextchar = nameend = optarg; *nameend && *nameend != '='; nameend++) - /* Do nothing. */ ; - - /* Test all long options for either exact match - or abbreviated matches. */ - for (p = longopts, option_index = 0; p->name; p++, option_index++) - if (!strncmp (p->name, nextchar, nameend - nextchar)) - { - if ((unsigned int) (nameend - nextchar) == strlen (p->name)) - { - /* Exact match found. */ - pfound = p; - indfound = option_index; - exact = 1; - break; - } - else if (pfound == NULL) - { - /* First nonexact match found. */ - pfound = p; - indfound = option_index; - } - else - /* Second or later nonexact match found. */ - ambig = 1; - } - if (ambig && !exact) - { - if (opterr) - fprintf (stderr, _("%s: option `-W %s' is ambiguous\n"), - argv[0], argv[optind]); - nextchar += strlen (nextchar); - optind++; - return '?'; - } - if (pfound != NULL) - { - option_index = indfound; - if (*nameend) - { - /* Don't test has_arg with >, because some C compilers don't - allow it to be used on enums. */ - if (pfound->has_arg) - optarg = nameend + 1; - else - { - if (opterr) - fprintf (stderr, _("\ -%s: option `-W %s' doesn't allow an argument\n"), - argv[0], pfound->name); - - nextchar += strlen (nextchar); - return '?'; - } - } - else if (pfound->has_arg == 1) - { - if (optind < argc) - optarg = argv[optind++]; - else - { - if (opterr) - fprintf (stderr, - _("%s: option `%s' requires an argument\n"), - argv[0], argv[optind - 1]); - nextchar += strlen (nextchar); - return optstring[0] == ':' ? ':' : '?'; - } - } - nextchar += strlen (nextchar); - if (longind != NULL) - *longind = option_index; - if (pfound->flag) - { - *(pfound->flag) = pfound->val; - return 0; - } - return pfound->val; - } - nextchar = NULL; - return 'W'; /* Let the application handle it. */ - } - if (temp[1] == ':') - { - if (temp[2] == ':') - { - /* This is an option that accepts an argument optionally. */ - if (*nextchar != '\0') - { - optarg = nextchar; - optind++; - } - else - optarg = NULL; - nextchar = NULL; - } - else - { - /* This is an option that requires an argument. */ - if (*nextchar != '\0') - { - optarg = nextchar; - /* If we end this ARGV-element by taking the rest as an arg, - we must advance to the next element now. */ - optind++; - } - else if (optind == argc) - { - if (opterr) - { - /* 1003.2 specifies the format of this message. */ - fprintf (stderr, - _("%s: option requires an argument -- %c\n"), - argv[0], c); - } - optopt = c; - if (optstring[0] == ':') - c = ':'; - else - c = '?'; - } - else - /* We already incremented `optind' once; - increment it again when taking next ARGV-elt as argument. */ - optarg = argv[optind++]; - nextchar = NULL; - } - } - return c; - } -} - -int -getopt (argc, argv, optstring) - int argc; - char *const *argv; - const char *optstring; -{ - return _getopt_internal (argc, argv, optstring, - (const struct option *) 0, - (int *) 0, - 0); -} - -#endif /* Not ELIDE_CODE. */ - -#ifdef TEST - -/* Compile with -DTEST to make an executable for use in testing - the above definition of `getopt'. */ - -int -main (argc, argv) - int argc; - char **argv; -{ - int c; - int digit_optind = 0; - - while (1) - { - int this_option_optind = optind ? optind : 1; - - c = getopt (argc, argv, "abc:d:0123456789"); - if (c == -1) - break; - - switch (c) - { - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - case '8': - case '9': - if (digit_optind != 0 && digit_optind != this_option_optind) - printf ("digits occur in two different argv-elements.\n"); - digit_optind = this_option_optind; - printf ("option %c\n", c); - break; - - case 'a': - printf ("option a\n"); - break; - - case 'b': - printf ("option b\n"); - break; - - case 'c': - printf ("option c with value `%s'\n", optarg); - break; - - case '?': - break; - - default: - printf ("?? getopt returned character code 0%o ??\n", c); - } - } - - if (optind < argc) - { - printf ("non-option ARGV-elements: "); - while (optind < argc) - printf ("%s ", argv[optind++]); - printf ("\n"); - } - - exit (0); -} - -#endif /* TEST */ diff --git a/contrib/gperf/lib/getopt.c.patch b/contrib/gperf/lib/getopt.c.patch deleted file mode 100644 index 6fedd84a8315..000000000000 --- a/contrib/gperf/lib/getopt.c.patch +++ /dev/null @@ -1,25 +0,0 @@ -getopt.c is a modified version of the getopt.c found in the glibc snapshot -on 1998-04-14. Below the patch that has been applied to this file. The glibc -maintainer has been informed of these patches. - -diff -c3 getopt.c.orig getopt.c -*** getopt.c.orig Sun Mar 8 16:06:55 1998 ---- getopt.c Thu Apr 16 00:09:41 1998 -*************** -*** 201,207 **** - /* Avoid depending on library functions or files - whose names are inconsistent. */ - -! char *getenv (); - - static char * - my_index (str, chr) ---- 201,208 ---- - /* Avoid depending on library functions or files - whose names are inconsistent. */ - -! extern char *getenv (); -! extern int strncmp (); - - static char * - my_index (str, chr) diff --git a/contrib/gperf/lib/getopt1.c b/contrib/gperf/lib/getopt1.c deleted file mode 100644 index 3d264f2db4d5..000000000000 --- a/contrib/gperf/lib/getopt1.c +++ /dev/null @@ -1,188 +0,0 @@ -/* getopt_long and getopt_long_only entry points for GNU getopt. - Copyright (C) 1987,88,89,90,91,92,93,94,96,97,98 - Free Software Foundation, Inc. - This file is part of the GNU C Library. - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with the GNU C Library; see the file COPYING.LIB. If not, - write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif - -#include "getopt.h" - -#if !defined __STDC__ || !__STDC__ -/* This is a separate conditional since some stdc systems - reject `defined (const)'. */ -#ifndef const -#define const -#endif -#endif - -#include <stdio.h> - -/* Comment out all this code if we are using the GNU C Library, and are not - actually compiling the library itself. This code is part of the GNU C - Library, but also included in many other GNU distributions. Compiling - and linking in this code is a waste when using the GNU C library - (especially if it is a shared library). Rather than having every GNU - program understand `configure --with-gnu-libc' and omit the object files, - it is simpler to just do this in the source for each such file. */ - -#define GETOPT_INTERFACE_VERSION 2 -#if !defined _LIBC && defined __GLIBC__ && __GLIBC__ >= 2 -#include <gnu-versions.h> -#if _GNU_GETOPT_INTERFACE_VERSION == GETOPT_INTERFACE_VERSION -#define ELIDE_CODE -#endif -#endif - -#ifndef ELIDE_CODE - - -/* This needs to come after some library #include - to get __GNU_LIBRARY__ defined. */ -#ifdef __GNU_LIBRARY__ -#include <stdlib.h> -#endif - -#ifndef NULL -#define NULL 0 -#endif - -int -getopt_long (argc, argv, options, long_options, opt_index) - int argc; - char *const *argv; - const char *options; - const struct option *long_options; - int *opt_index; -{ - return _getopt_internal (argc, argv, options, long_options, opt_index, 0); -} - -/* Like getopt_long, but '-' as well as '--' can indicate a long option. - If an option that starts with '-' (not '--') doesn't match a long option, - but does match a short option, it is parsed as a short option - instead. */ - -int -getopt_long_only (argc, argv, options, long_options, opt_index) - int argc; - char *const *argv; - const char *options; - const struct option *long_options; - int *opt_index; -{ - return _getopt_internal (argc, argv, options, long_options, opt_index, 1); -} - - -#endif /* Not ELIDE_CODE. */ - -#ifdef TEST - -#include <stdio.h> - -int -main (argc, argv) - int argc; - char **argv; -{ - int c; - int digit_optind = 0; - - while (1) - { - int this_option_optind = optind ? optind : 1; - int option_index = 0; - static struct option long_options[] = - { - {"add", 1, 0, 0}, - {"append", 0, 0, 0}, - {"delete", 1, 0, 0}, - {"verbose", 0, 0, 0}, - {"create", 0, 0, 0}, - {"file", 1, 0, 0}, - {0, 0, 0, 0} - }; - - c = getopt_long (argc, argv, "abc:d:0123456789", - long_options, &option_index); - if (c == -1) - break; - - switch (c) - { - case 0: - printf ("option %s", long_options[option_index].name); - if (optarg) - printf (" with arg %s", optarg); - printf ("\n"); - break; - - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - case '8': - case '9': - if (digit_optind != 0 && digit_optind != this_option_optind) - printf ("digits occur in two different argv-elements.\n"); - digit_optind = this_option_optind; - printf ("option %c\n", c); - break; - - case 'a': - printf ("option a\n"); - break; - - case 'b': - printf ("option b\n"); - break; - - case 'c': - printf ("option c with value `%s'\n", optarg); - break; - - case 'd': - printf ("option d with value `%s'\n", optarg); - break; - - case '?': - break; - - default: - printf ("?? getopt returned character code 0%o ??\n", c); - } - } - - if (optind < argc) - { - printf ("non-option ARGV-elements: "); - while (optind < argc) - printf ("%s ", argv[optind++]); - printf ("\n"); - } - - exit (0); -} - -#endif /* TEST */ diff --git a/contrib/gperf/src/bool-array.cc b/contrib/gperf/src/bool-array.cc deleted file mode 100644 index 0774b2d65265..000000000000 --- a/contrib/gperf/src/bool-array.cc +++ /dev/null @@ -1,49 +0,0 @@ -/* Fast lookup table abstraction implemented as an Iteration Number Array - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. */ - -#include "bool-array.h" - -#include <stdio.h> -#include <string.h> -#include "options.h" -#include "trace.h" - -STORAGE_TYPE * Bool_Array::storage_array; -STORAGE_TYPE Bool_Array::iteration_number; -unsigned int Bool_Array::size; - -/* Prints out debugging diagnostics. */ - -Bool_Array::~Bool_Array (void) -{ - T (Trace t ("Bool_Array::~Bool_Array");) - if (option[DEBUG]) - fprintf (stderr, "\ndumping boolean array information\n" - "size = %d\niteration number = %d\nend of array dump\n", - size, iteration_number); -} - -#ifndef __OPTIMIZE__ - -#define INLINE /* not inline */ -#include "bool-array.icc" -#undef INLINE - -#endif /* not defined __OPTIMIZE__ */ diff --git a/contrib/gperf/src/bool-array.h b/contrib/gperf/src/bool-array.h deleted file mode 100644 index 8330fcd22019..000000000000 --- a/contrib/gperf/src/bool-array.h +++ /dev/null @@ -1,66 +0,0 @@ -/* This may look like C code, but it is really -*- C++ -*- */ - -/* Simple lookup table abstraction implemented as an Iteration Number Array. - - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -/* Define and implement a simple boolean array abstraction, - uses an Iteration Numbering implementation to save on initialization time. */ - -#ifndef bool_array_h -#define bool_array_h 1 - -#include "trace.h" - -#ifdef LO_CAL -/* If we are on a memory diet then we'll only make these use a limited - amount of storage space. */ -typedef unsigned short STORAGE_TYPE; -#else -typedef unsigned int STORAGE_TYPE; -#endif - -class Bool_Array -{ -private: - static STORAGE_TYPE *storage_array; /* Initialization of the index space. */ - static STORAGE_TYPE iteration_number; /* Keep track of the current iteration. */ - static unsigned int size; /* Keep track of array size. */ - -public: - Bool_Array (void); - ~Bool_Array (void); - static void init (STORAGE_TYPE *buffer, unsigned int s); - static int find (int hash_value); - static void reset (void); -}; - -#ifdef __OPTIMIZE__ /* efficiency hack! */ - -#include <stdio.h> -#include <string.h> -#include "options.h" -#define INLINE inline -#include "bool-array.icc" -#undef INLINE - -#endif - -#endif diff --git a/contrib/gperf/src/bool-array.icc b/contrib/gperf/src/bool-array.icc deleted file mode 100644 index 6de6f236e712..000000000000 --- a/contrib/gperf/src/bool-array.icc +++ /dev/null @@ -1,85 +0,0 @@ -/* Inline Functions for bool-array.{h,cc}. - - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -// This needs: -//#include <stdio.h> -//#include <string.h> -//#include "options.h" -//#include "trace.h" - -INLINE -Bool_Array::Bool_Array (void) -{ - T (Trace t ("Bool_Array::Bool_Array");) - storage_array = 0; - iteration_number = size = 0; -} - -INLINE void -Bool_Array::init (STORAGE_TYPE *buffer, unsigned int s) -{ - T (Trace t ("Bool_Array::init");) - size = s; - iteration_number = 1; - storage_array = buffer; - memset (storage_array, 0, s * sizeof (*storage_array)); - if (option[DEBUG]) - fprintf (stderr, "\nbool array size = %d, total bytes = %d\n", - size, (unsigned int) (size * sizeof (*storage_array))); -} - -INLINE int -Bool_Array::find (int index) -{ - T (Trace t ("Bool_Array::find");) - if (storage_array[index] == iteration_number) - return 1; - else - { - storage_array[index] = iteration_number; - return 0; - } -} - -INLINE void -Bool_Array::reset (void) -{ - T (Trace t ("Bool_Array::reset");) - /* If we wrap around it's time to zero things out again! However, this only - occurs once about every 2^31 or 2^15 iterations, so it should probably - never happen! */ - - if (++iteration_number == 0) - { - if (option[DEBUG]) - { - fprintf (stderr, "(re-initializing bool_array)..."); - fflush (stderr); - } - iteration_number = 1; - memset (storage_array, 0, size * sizeof (*storage_array)); - if (option[DEBUG]) - { - fprintf (stderr, "done\n"); - fflush (stderr); - } - } -} diff --git a/contrib/gperf/src/config.h.in b/contrib/gperf/src/config.h.in deleted file mode 100644 index 4d3d76212d6c..000000000000 --- a/contrib/gperf/src/config.h.in +++ /dev/null @@ -1,19 +0,0 @@ -/* config.h.in. Generated automatically from configure.in by autoheader. */ - -/* Define if the C++ compiler supports "throw ()" declarations. */ -#undef HAVE_THROW_DECL - -/* Define if you have the getrlimit function. */ -#undef HAVE_GETRLIMIT - -/* Define if you have the setrlimit function. */ -#undef HAVE_SETRLIMIT - -/* Define if you have the <sys/resource.h> header file. */ -#undef HAVE_SYS_RESOURCE_H - -/* Define if you have the <sys/time.h> header file. */ -#undef HAVE_SYS_TIME_H - -/* Define if you have the <unistd.h> header file. */ -#undef HAVE_UNISTD_H diff --git a/contrib/gperf/src/key-list.h b/contrib/gperf/src/key-list.h deleted file mode 100644 index 98b8fa5e0c84..000000000000 --- a/contrib/gperf/src/key-list.h +++ /dev/null @@ -1,96 +0,0 @@ -/* This may look like C code, but it is really -*- C++ -*- */ - -/* Data and function member declarations for the keyword list class. - - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. */ - -/* The key word list is a useful abstraction that keeps track of - various pieces of information that enable that fast generation - of the Gen_Perf.hash function. A Key_List is a singly-linked - list of List_Nodes. */ - -#ifndef key_list_h -#define key_list_h 1 - -#include "list-node.h" -#include "vectors.h" -#include "read-line.h" - -/* OSF/1 cxx needs these forward declarations. */ -struct Output_Constants; -struct Output_Compare; - -class Key_List : private Read_Line, public Vectors -{ -private: - const char *array_type; /* Pointer to the type for word list. */ - const char *return_type; /* Pointer to return type for lookup function. */ - const char *struct_tag; /* Shorthand for user-defined struct tag type. */ - const char *include_src; /* C source code to be included verbatim. */ - int max_key_len; /* Maximum length of the longest keyword. */ - int min_key_len; /* Minimum length of the shortest keyword. */ - int min_hash_value; /* Minimum hash value for all keywords. */ - int max_hash_value; /* Maximum hash value for all keywords. */ - int occurrence_sort; /* True if sorting by occurrence. */ - int hash_sort; /* True if sorting by hash value. */ - int additional_code; /* True if any additional C code is included. */ - int list_len; /* Length of head's Key_List, not counting duplicates. */ - int total_keys; /* Total number of keys, counting duplicates. */ - static int determined[MAX_ALPHA_SIZE]; /* Used in function reorder, below. */ - static int get_occurrence (List_Node *ptr); -#ifndef strcspn - static int strcspn (const char *s, const char *reject); -#endif - static int already_determined (List_Node *ptr); - static void set_determined (List_Node *ptr); - void compute_min_max (void); - int num_hash_values (void); - void output_constants (struct Output_Constants&); - void output_hash_function (void); - void output_keylength_table (void); - void output_keyword_table (void); - void output_lookup_array (void); - void output_lookup_tables (void); - void output_lookup_function_body (const struct Output_Compare&); - void output_lookup_function (void); - void set_output_types (void); - void dump (void); - const char *get_array_type (void); - const char *save_include_src (void); - const char *get_special_input (char delimiter); - List_Node *merge (List_Node *list1, List_Node *list2); - List_Node *merge_sort (List_Node *head); - -protected: - List_Node *head; /* Points to the head of the linked list. */ - int total_duplicates; /* Total number of duplicate hash values. */ - -public: - Key_List (void); - ~Key_List (void); - int keyword_list_length (void); - int max_key_length (void); - void reorder (void); - void sort (void); - void read_keys (void); - void output (void); -}; - -#endif diff --git a/contrib/gperf/src/new.cc b/contrib/gperf/src/new.cc deleted file mode 100644 index 8c6728ec4b2a..000000000000 --- a/contrib/gperf/src/new.cc +++ /dev/null @@ -1,87 +0,0 @@ -/* Defines a buffered memory allocation abstraction that reduces calls to - malloc. - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. */ - -#include "config.h" -#include <stdio.h> -#include <stdlib.h> /* declares malloc(), exit() */ -#include "trace.h" - -/* Determine default alignment. If your C++ compiler does not - like this then try something like #define DEFAULT_ALIGNMENT 8. */ -struct fooalign {char x; double d;}; -const int ALIGNMENT = ((char *)&((struct fooalign *) 0)->d - (char *)0); - -/* Provide an abstraction that cuts down on the number of - calls to NEW by buffering the memory pool from which - strings are allocated. */ - -void * -operator new (size_t size) -{ - T (Trace t ("operator new");) - static char *buf_start = 0; /* Large array used to reduce calls to NEW. */ - static char *buf_end = 0; /* Indicates end of BUF_START. */ - static size_t buf_size = 4096; /* Size of buffer pointed to by BUF_START. */ - char *temp; - - /* Align this on correct boundaries, just to be safe... */ - size = ((size + ALIGNMENT - 1) / ALIGNMENT) * ALIGNMENT; - - /* If we are about to overflow our buffer we'll just grab another - chunk of memory. Since we never free the original memory it - doesn't matter that no one points to the beginning of that - chunk. Note we use a heuristic that grows the buffer either by - size of the request or by twice the previous size, whichever is - larger. */ - - if (buf_start + size >= buf_end) - { - buf_size *= 2; - if (buf_size < size) - buf_size = size; - if ((buf_start = (char *)malloc (buf_size)) != (char *)0) - buf_end = buf_start + buf_size; - else - { - fprintf (stderr, "Virtual memory exhausted in `operator new'\n"); - exit (1); - } - } - - temp = buf_start; - buf_start += size; - return temp; -} - -/* We need this deletion operator in order to make the linker happy. - Because `operator new' and `operator delete' always come together. */ - -void -operator delete (void *ptr) -#ifdef HAVE_THROW_DECL - throw() -#endif -{ - T (Trace t ("operator delete");) - // We cannot call free here, as it doesn't match the mallocs. - // free ((char *) ptr); - (void) ptr; -} diff --git a/contrib/gperf/src/read-line.cc b/contrib/gperf/src/read-line.cc deleted file mode 100644 index 8cb0971cb6b9..000000000000 --- a/contrib/gperf/src/read-line.cc +++ /dev/null @@ -1,97 +0,0 @@ -/* Correctly reads an arbitrarily size string. - - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. */ - -#include "read-line.h" - -#include <stdlib.h> -#include <string.h> /* declares memcpy() */ -#include "options.h" -#include "trace.h" - -/* Recursively fills up the buffer. */ - -#define CHUNK_SIZE 4096 - -/* CHUNKS is the number of chunks (each of size CHUNK_SIZE) which have - already been read and which are temporarily stored on the stack. - This function reads the remainder of the line, allocates a buffer - for the entire line, fills the part beyond &buffer[chunks*CHUNK_SIZE], - and returns &buffer[chunks*CHUNK_SIZE]. */ - -char * -Read_Line::readln_aux (int chunks) -{ - T (Trace t ("Read_Line::readln_aux");) -#if LARGE_STACK - char buf[CHUNK_SIZE]; -#else - // Note: we don't use new, because that invokes a custom operator new. - char *buf = (char*)malloc(CHUNK_SIZE); - if (buf == NULL) - abort (); -#endif - char *bufptr = buf; - char *ptr; - int c; - - while (c = getc (fp), c != EOF && c != '\n') /* fill the current buffer */ - { - *bufptr++ = c; - if (bufptr - buf == CHUNK_SIZE) - { - if ((ptr = readln_aux (chunks + 1)) != NULL) - - /* prepend remainder to ptr buffer */ - { - ptr -= CHUNK_SIZE; - memcpy (ptr, buf, CHUNK_SIZE); - } - - goto done; - } - } - if (c == EOF && bufptr == buf && chunks == 0) - ptr = NULL; - else - { - size_t s1 = chunks * CHUNK_SIZE; - size_t s2 = bufptr - buf; - - ptr = new char[s1+s2+1]; - ptr += s1; - ptr[s2] = '\0'; - memcpy (ptr, buf, s2); - } - done: -#if !LARGE_STACK - free (buf); -#endif - - return ptr; -} - -#ifndef __OPTIMIZE__ - -#define INLINE /* not inline */ -#include "read-line.icc" -#undef INLINE - -#endif /* not defined __OPTIMIZE__ */ diff --git a/contrib/gperf/src/read-line.h b/contrib/gperf/src/read-line.h deleted file mode 100644 index b243c84749b5..000000000000 --- a/contrib/gperf/src/read-line.h +++ /dev/null @@ -1,53 +0,0 @@ -/* This may look like C code, but it is really -*- C++ -*- */ - -/* Reads arbitrarily long string from input file, returning it as a - dynamically allocated buffer. - - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. */ - -/* Returns a pointer to an arbitrary length string. Returns NULL on error or EOF - The storage for the string is dynamically allocated by new. */ - -#ifndef read_line_h -#define read_line_h 1 - -#include <stdio.h> - -class Read_Line -{ -private: - char *readln_aux (int chunks); - FILE *fp; /* FILE pointer to the input stream. */ - -public: - Read_Line (FILE *stream = stdin) : fp (stream) {} - char *get_line (void); -}; - -#ifdef __OPTIMIZE__ - -#include "trace.h" -#define INLINE inline -#include "read-line.icc" -#undef INLINE - -#endif - -#endif diff --git a/contrib/gperf/src/read-line.icc b/contrib/gperf/src/read-line.icc deleted file mode 100644 index cdb5bf6f8c0a..000000000000 --- a/contrib/gperf/src/read-line.icc +++ /dev/null @@ -1,47 +0,0 @@ -/* Inline Functions for read-line.{h,cc}. - - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. */ - -// This needs: -//#include <stdio.h> -//#include "trace.h" - -/* Returns the ``next'' line, ignoring comments beginning with '#'. */ -INLINE char * -Read_Line::get_line (void) -{ - T (Trace t ("Read_Line::get_line");) - int c; - - while ((c = getc (fp)) == '#') - { - while (c = getc (fp), c != EOF && c != '\n') - ; - - if (c == EOF) - return (char *)0; - } - - if (c == EOF) - return (char *)0; - - ungetc (c, stdin); - return readln_aux (0); -} diff --git a/contrib/gperf/src/trace.cc b/contrib/gperf/src/trace.cc deleted file mode 100644 index e571abae4239..000000000000 --- a/contrib/gperf/src/trace.cc +++ /dev/null @@ -1,35 +0,0 @@ -/* Tracing function calls. - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. */ - -#include "trace.h" - -#include <stdio.h> - -int Trace::nesting = 0; - -Trace::Trace (const char *n) -{ - fprintf (stderr, "%*scalling %s\n", 3 * nesting++, "", name = n); -} - -Trace::~Trace (void) -{ - fprintf (stderr, "%*sleaving %s\n", 3 * --nesting, "", name); -} diff --git a/contrib/gperf/src/trace.h b/contrib/gperf/src/trace.h deleted file mode 100644 index f16fcc5bd99e..000000000000 --- a/contrib/gperf/src/trace.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Tracing function calls. - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. */ - -#ifndef trace_h -#define trace_h 1 - -#ifdef TRACE -#define T(X) X -#else -#define T(X) -#endif - -class Trace -{ -private: - static int nesting; - const char *name; -public: - Trace (const char *n); - ~Trace (void); -}; - -#endif diff --git a/contrib/gperf/src/vectors.cc b/contrib/gperf/src/vectors.cc deleted file mode 100644 index 1da014d4a31a..000000000000 --- a/contrib/gperf/src/vectors.cc +++ /dev/null @@ -1,25 +0,0 @@ -/* Static class data members that are shared between several classes. - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. */ - -#include "vectors.h" - -int Vectors::ALPHA_SIZE = MAX_ALPHA_SIZE; -int Vectors::occurrences[MAX_ALPHA_SIZE]; -int Vectors::asso_values[MAX_ALPHA_SIZE]; diff --git a/contrib/gperf/src/vectors.h b/contrib/gperf/src/vectors.h deleted file mode 100644 index 28a105397ebb..000000000000 --- a/contrib/gperf/src/vectors.h +++ /dev/null @@ -1,37 +0,0 @@ -/* This may look like C code, but it is really -*- C++ -*- */ - -/* Static class data members that are shared between several classes via - inheritance. - - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. */ - -#ifndef vectors_h -#define vectors_h 1 - -static const int MAX_ALPHA_SIZE = 256; - -struct Vectors -{ - static int ALPHA_SIZE; /* Size of alphabet. */ - static int occurrences[MAX_ALPHA_SIZE]; /* Counts occurrences of each key set character. */ - static int asso_values[MAX_ALPHA_SIZE]; /* Value associated with each character. */ -}; - -#endif diff --git a/contrib/gperf/src/version.h b/contrib/gperf/src/version.h deleted file mode 100644 index 4ffba2ec91a1..000000000000 --- a/contrib/gperf/src/version.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Current program version number. - - Copyright (C) 1989-1998 Free Software Foundation, Inc. - written by Douglas C. Schmidt (schmidt@ics.uci.edu) - -This file is part of GNU GPERF. - -GNU GPERF is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 1, or (at your option) -any later version. - -GNU GPERF is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU GPERF; see the file COPYING. If not, write to the Free -Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. */ - -/* Current release version. */ -extern const char *version_string; diff --git a/contrib/gperf/tests/Makefile.in b/contrib/gperf/tests/Makefile.in deleted file mode 100644 index a7e3be0af6c3..000000000000 --- a/contrib/gperf/tests/Makefile.in +++ /dev/null @@ -1,232 +0,0 @@ -# Makefile for gperf/tests - -# Copyright (C) 1989, 1992, 1993, 1995, 1998 Free Software Foundation, Inc. -# written by Douglas C. Schmidt (schmidt@ics.uci.edu) -# -# This file is part of GNU GPERF. -# -# GNU GPERF is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 1, or (at your option) -# any later version. -# -# GNU GPERF is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU GPERF; see the file COPYING. If not, write to the Free -# Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111, USA. - -#### Start of system configuration section. #### - -# Directories used by "make": -srcdir = @srcdir@ - -# Programs used by "make": -# C compiler -CC = @CC@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -# C++ compiler -CXX = @CXX@ -CXXFLAGS = @CXXFLAGS@ -CXXCPP = @CXXCPP@ -# Other -MV = mv -LN = ln -RM = rm -f -@SET_MAKE@ - -#### End of system configuration section. #### - -SHELL = /bin/sh - -VPATH = $(srcdir) - -GPERF = ../src/gperf - -all : - -install : all - -installdirs : - -uninstall : - -check : check-link-c check-link-c++ check-c check-ada check-modula3 check-pascal check-test - @true - -extracheck : @CHECK_LANG_SYNTAX@ - @true - -check-link-c: force - @echo "performing some tests of the perfect hash generator" - $(CC) -c $(CFLAGS) $(srcdir)/test.c - $(GPERF) -p -c -l -S1 -o $(srcdir)/c.gperf > cinset.c - $(CC) $(CFLAGS) -o cout cinset.c test.o - -check-link-c++: force - -check-c: - @echo "testing ANSI C reserved words, all items should be found in the set" - ./cout -v < $(srcdir)/c.gperf > c.out - diff $(srcdir)/c.exp c.out - -check-ada: - $(GPERF) -k1,4,'$$' $(srcdir)/ada.gperf > adainset.c -# double '$$' is only there since make gets confused; program wants only 1 '$' - $(CC) $(CFLAGS) -o aout adainset.c test.o - @echo "testing Ada reserved words, all items should be found in the set" - ./aout -v < $(srcdir)/ada.gperf > ada-res.out - diff $(srcdir)/ada-res.exp ada-res.out - $(GPERF) -p -D -k1,'$$' -s 2 -o $(srcdir)/adadefs.gperf > preinset.c - $(CC) $(CFLAGS) -o preout preinset.c test.o - @echo "testing Ada predefined words, all items should be found in the set" - ./preout -v < $(srcdir)/adadefs.gperf > ada-pred.out - diff $(srcdir)/ada-pred.exp ada-pred.out - -check-modula3: - $(GPERF) -k1,2,'$$' -o $(srcdir)/modula3.gperf > m3inset.c - $(CC) $(CFLAGS) -o m3out m3inset.c test.o - @echo "testing Modula3 reserved words, all items should be found in the set" - ./m3out -v < $(srcdir)/modula3.gperf > modula.out - diff $(srcdir)/modula.exp modula.out - -check-pascal: - $(GPERF) -o -S2 -p < $(srcdir)/pascal.gperf > pinset.c - $(CC) $(CFLAGS) -o pout pinset.c test.o - @echo "testing Pascal reserved words, all items should be found in the set" - ./pout -v < $(srcdir)/pascal.gperf > pascal.out - diff $(srcdir)/pascal.exp pascal.out - -# these next 5 are demos that show off the generated code -check-test: - $(GPERF) -p -j1 -g -o -t -N is_reserved_word -k1,3,'$$' < $(srcdir)/c-parse.gperf > test-1.out - diff $(srcdir)/test-1.exp test-1.out - $(GPERF) -n -k1-8 -l < $(srcdir)/modula2.gperf > test-2.out - diff $(srcdir)/test-2.exp test-2.out - $(GPERF) -p -j 1 -o -a -C -g -t -k1,4,$$ < $(srcdir)/gplus.gperf > test-3.out - diff $(srcdir)/test-3.exp test-3.out - $(GPERF) -D -p -t < $(srcdir)/c-parse.gperf > test-4.out - diff $(srcdir)/test-4.exp test-4.out - $(GPERF) -g -o -j1 -t -p -N is_reserved_word < $(srcdir)/gpc.gperf > test-5.out - diff $(srcdir)/test-5.exp test-5.out -# prints out the help message - -$(GPERF) -h > test-6.out 2>&1 - diff $(srcdir)/test-6.exp test-6.out - @echo "only if, do, for, case, goto, else, while, and return should be found " - ./aout -v < $(srcdir)/c.gperf > test-7.out - diff $(srcdir)/test-7.exp test-7.out - -# The following validates valid language syntax with different parameters. -# Works only with gcc and g++, and only on platforms where "gcc -ansi" is -# usable. (There are still platforms where gcc-2.8.0's fixincludes does not -# work well enough.) - -VALIDATE = CC='$(CC)' CFLAGS='$(CFLAGS)' CXX='$(CXX)' CXXFLAGS='$(CXXFLAGS)' GPERF='$(GPERF)' ./validate - -check-lang-syntax : force - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -c - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -C - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -E - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -G - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -G -C - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -G -E - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -D - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -D -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -S 10 - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -S 10 -c - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -S 10 -C - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -S 10 -E - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -S 10 -G - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -S 10 -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -S 10 -D - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -S 10 -D -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -S 1000 - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -p - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -p -C - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -p -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -p -D - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -p -D -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -p -S 10 - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -p -S 10 -C - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -p -S 10 -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -p -S 10 -D - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -p -S 10 -D -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -p -S 1000 - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -K key_name - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -H hash_function_name - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest1.gperf -W word_list_name - sed -e 's,in_word_set,lookup_function_name,g' < jstest1.gperf > tmp-jstest1.gperf && \ - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 tmp-jstest1.gperf -N lookup_function_name - sed -e 's,Perfect_Hash,class_name,g' < jstest1.gperf > tmp-jstest1.gperf && \ - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 tmp-jstest1.gperf -Z class_name - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -c - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -C - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -E - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -G - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -G -C - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -G -E - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -D - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -D -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -S 10 - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -S 10 -c - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -S 10 -C - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -S 10 -E - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -S 10 -G - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -S 10 -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -S 10 -D - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -S 10 -D -l - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -S 1000 - sed -e 's,name,key_name,g' < jstest2.gperf > tmp-jstest2.gperf && \ - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 tmp-jstest2.gperf -t -p -K key_name - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 jstest2.gperf -t -p -H hash_function_name - sed -e 's,in_word_set,lookup_function_name,g' < jstest2.gperf > tmp-jstest2.gperf && \ - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 tmp-jstest2.gperf -t -p -N lookup_function_name - sed -e 's,Perfect_Hash,class_name,g' < jstest2.gperf > tmp-jstest2.gperf && \ - $(VALIDATE) KR-C,C,ANSI-C,C++ -k1,2 tmp-jstest2.gperf -t -p -Z class_name - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -c - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -C - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -E - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -G - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -G -C - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -G -E - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -l - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -D - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -D -l - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -S 10 - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -S 10 -c - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -S 10 -C - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -S 10 -E - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -S 10 -G - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -S 10 -l - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -S 10 -D - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -S 10 -D -l - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -S 1000 - sed -e 's,name,key_name,g' < jstest3.gperf > tmp-jstest3.gperf && \ - $(VALIDATE) C,ANSI-C,C++ -k1,2 tmp-jstest3.gperf -t -p -K key_name - $(VALIDATE) C,ANSI-C,C++ -k1,2 jstest3.gperf -t -p -H hash_function_name - sed -e 's,in_word_set,lookup_function_name,g' < jstest3.gperf > tmp-jstest3.gperf && \ - $(VALIDATE) C,ANSI-C,C++ -k1,2 tmp-jstest3.gperf -t -p -N lookup_function_name - sed -e 's,Perfect_Hash,class_name,g' < jstest3.gperf > tmp-jstest3.gperf && \ - $(VALIDATE) C,ANSI-C,C++ -k1,2 tmp-jstest3.gperf -t -p -Z class_name - -mostlyclean : clean - -clean : force - $(RM) *.o core *inset.c output.* *.out aout cout m3out pout preout tmp-* valitest* - -distclean : clean - $(RM) config.status config.log config.cache Makefile - -maintainer-clean : distclean - -force : - diff --git a/contrib/gperf/tests/ada-pred.exp b/contrib/gperf/tests/ada-pred.exp deleted file mode 100644 index 33caaa32ea1f..000000000000 --- a/contrib/gperf/tests/ada-pred.exp +++ /dev/null @@ -1,54 +0,0 @@ -in word set boolean -in word set character -in word set constraint_error -in word set false -in word set float -in word set integer -in word set natural -in word set numeric_error -in word set positive -in word set program_error -in word set storage_error -in word set string -in word set tasking_error -in word set true -in word set address -in word set aft -in word set base -in word set callable -in word set constrained -in word set count -in word set delta -in word set digits -in word set emax -in word set epsilon -in word set first -in word set firstbit -in word set fore -in word set image -in word set large -in word set last -in word set lastbit -in word set length -in word set machine_emax -in word set machine_emin -in word set machine_mantissa -in word set machine_overflows -in word set machine_radix -in word set machine_rounds -in word set mantissa -in word set pos -in word set position -in word set pred -in word set range -in word set safe_emax -in word set safe_large -in word set safe_small -in word set size -in word set small -in word set storage_size -in word set succ -in word set terminated -in word set val -in word set value -in word set width diff --git a/contrib/gperf/tests/ada-res.exp b/contrib/gperf/tests/ada-res.exp deleted file mode 100644 index 8134fe861f5f..000000000000 --- a/contrib/gperf/tests/ada-res.exp +++ /dev/null @@ -1,63 +0,0 @@ -in word set else -in word set exit -in word set terminate -in word set type -in word set raise -in word set range -in word set reverse -in word set declare -in word set end -in word set record -in word set exception -in word set not -in word set then -in word set return -in word set separate -in word set select -in word set digits -in word set renames -in word set subtype -in word set elsif -in word set function -in word set for -in word set package -in word set procedure -in word set private -in word set while -in word set when -in word set new -in word set entry -in word set delay -in word set case -in word set constant -in word set at -in word set abort -in word set accept -in word set and -in word set delta -in word set access -in word set abs -in word set pragma -in word set array -in word set use -in word set out -in word set do -in word set others -in word set of -in word set or -in word set all -in word set limited -in word set loop -in word set null -in word set task -in word set in -in word set is -in word set if -in word set rem -in word set mod -in word set begin -in word set body -in word set xor -in word set goto -in word set generic -in word set with diff --git a/contrib/gperf/tests/adadefs.gperf b/contrib/gperf/tests/adadefs.gperf deleted file mode 100644 index 875be69abc97..000000000000 --- a/contrib/gperf/tests/adadefs.gperf +++ /dev/null @@ -1,54 +0,0 @@ -boolean -character -constraint_error -false -float -integer -natural -numeric_error -positive -program_error -storage_error -string -tasking_error -true -address -aft -base -callable -constrained -count -delta -digits -emax -epsilon -first -firstbit -fore -image -large -last -lastbit -length -machine_emax -machine_emin -machine_mantissa -machine_overflows -machine_radix -machine_rounds -mantissa -pos -position -pred -range -safe_emax -safe_large -safe_small -size -small -storage_size -succ -terminated -val -value -width diff --git a/contrib/gperf/tests/c.exp b/contrib/gperf/tests/c.exp deleted file mode 100644 index 10c8b7f61164..000000000000 --- a/contrib/gperf/tests/c.exp +++ /dev/null @@ -1,32 +0,0 @@ -in word set if -in word set do -in word set int -in word set for -in word set case -in word set char -in word set auto -in word set goto -in word set else -in word set long -in word set void -in word set enum -in word set float -in word set short -in word set union -in word set break -in word set while -in word set const -in word set double -in word set static -in word set extern -in word set struct -in word set return -in word set sizeof -in word set switch -in word set signed -in word set typedef -in word set default -in word set unsigned -in word set continue -in word set register -in word set volatile diff --git a/contrib/gperf/tests/configure b/contrib/gperf/tests/configure deleted file mode 100755 index 1c715de8662f..000000000000 --- a/contrib/gperf/tests/configure +++ /dev/null @@ -1,1214 +0,0 @@ -#! /bin/sh - -# Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. - -# Defaults: -ac_help= -ac_default_prefix=/usr/local -# Any additions from configure.in: - -# Initialize some variables set by options. -# The variables have the same names as the options, with -# dashes changed to underlines. -build=NONE -cache_file=./config.cache -exec_prefix=NONE -host=NONE -no_create= -nonopt=NONE -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -target=NONE -verbose= -x_includes=NONE -x_libraries=NONE -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - -ac_prev= -for ac_option -do - - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case "$ac_option" in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir="$ac_optarg" ;; - - -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; - - -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "enable_${ac_feature}='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; - - -host | --host | --hos | --ho) - ac_prev=host ;; - -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" - exit 0 ;; - - -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "with_${ac_package}='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; - - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } - ;; - - *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" - ;; - - esac -done - -if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>./config.log - -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 - -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg -do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; - esac -done - -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h - -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=c-parse.gperf - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } - else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } - fi -fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` - -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file -else - echo "creating cache $cache_file" - > $cache_file -fi - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - - -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:523: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftestmake <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftestmake -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 - SET_MAKE= -else - echo "$ac_t""no" 1>&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:552: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:581: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - ac_prog_rejected=no - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:629: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <<EOF -#line 639 "configure" -#include "confdefs.h" -main(){return(0);} -EOF -if { (eval echo configure:643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:663: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:668: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <<EOF -#ifdef __GNUC__ - yes; -#endif -EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:677: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:692: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" - fi -else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" -fi - - echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:720: checking how to run the C preprocessor" >&5 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # This must be in double quotes, not single quotes, because CPP may get - # substituted into the Makefile and "${CC-cc}" will confuse make. - CPP="${CC-cc} -E" - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. - cat > conftest.$ac_ext <<EOF -#line 735 "configure" -#include "confdefs.h" -#include <assert.h> -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -E -traditional-cpp" - cat > conftest.$ac_ext <<EOF -#line 752 "configure" -#include "confdefs.h" -#include <assert.h> -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:758: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP=/lib/cpp -fi -rm -f conftest* -fi -rm -f conftest* - ac_cv_prog_CPP="$CPP" -fi - CPP="$ac_cv_prog_CPP" -else - ac_cv_prog_CPP="$CPP" -fi -echo "$ac_t""$CPP" 1>&6 - - for ac_prog in $CCC c++ g++ gcc CC cxx cc++ -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:785: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CXX="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CXX="$ac_cv_prog_CXX" -if test -n "$CXX"; then - echo "$ac_t""$CXX" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$CXX" && break -done -test -n "$CXX" || CXX="gcc" - - -echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:816: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 - -ac_ext=C -# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CXX-g++} -o conftest $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cxx_cross - -cat > conftest.$ac_ext <<EOF -#line 826 "configure" -#include "confdefs.h" -main(){return(0);} -EOF -if { (eval echo configure:830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cxx_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cxx_cross=no - else - ac_cv_prog_cxx_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cxx_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6 -if test $ac_cv_prog_cxx_works = no; then - { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:856: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 -cross_compiling=$ac_cv_prog_cxx_cross - -echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 -echo "configure:861: checking whether we are using GNU C++" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.C <<EOF -#ifdef __GNUC__ - yes; -#endif -EOF -if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:870: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gxx=yes -else - ac_cv_prog_gxx=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gxx" 1>&6 - -if test $ac_cv_prog_gxx = yes; then - GXX=yes - ac_test_CXXFLAGS="${CXXFLAGS+set}" - ac_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS= - echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 -echo "configure:885: checking whether ${CXX-g++} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.cc -if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then - ac_cv_prog_cxx_g=yes -else - ac_cv_prog_cxx_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6 - if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS="$ac_save_CXXFLAGS" - elif test $ac_cv_prog_cxx_g = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-O2" - fi -else - GXX= - test "${CXXFLAGS+set}" = set || CXXFLAGS="-g" -fi - - echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6 -echo "configure:913: checking how to run the C++ preprocessor" >&5 -if test -z "$CXXCPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_ext=C -# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CXX-g++} -o conftest $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cxx_cross - CXXCPP="${CXX-g++} -E" - cat > conftest.$ac_ext <<EOF -#line 926 "configure" -#include "confdefs.h" -#include <stdlib.h> -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:931: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CXXCPP=/lib/cpp -fi -rm -f conftest* - ac_cv_prog_CXXCPP="$CXXCPP" -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross -fi -fi -CXXCPP="$ac_cv_prog_CXXCPP" -echo "$ac_t""$CXXCPP" 1>&6 - - if test $ac_cv_prog_gcc = yes -a $ac_cv_prog_gxx = yes; then - CHECK_LANG_SYNTAX='check-lang-syntax' -else - CHECK_LANG_SYNTAX='' -fi - -trap '' 1 2 15 -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' -fi - -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -cat > conftest.defs <<\EOF -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g -s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g -s%\[%\\&%g -s%\]%\\&%g -s%\$%$$%g -EOF -DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` -rm -f conftest.defs - - -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} - -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS <<EOF -#! /bin/sh -# Generated automatically by configure. -# Run this file to recreate the current configuration. -# This directory was configured as follows, -# on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# -# $0 $ac_configure_args -# -# Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. - -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option -do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac -done - -ac_given_srcdir=$srcdir - -trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS <<EOF - -# Protect against being on the right side of a sed subst in config.status. -sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g; - s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@SET_MAKE@%$SET_MAKE%g -s%@CC@%$CC%g -s%@CPP@%$CPP%g -s%@CXX@%$CXX%g -s%@CXXCPP@%$CXXCPP%g -s%@CHECK_LANG_SYNTAX@%$CHECK_LANG_SYNTAX%g - -CEOF -EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - -cat >> $CONFIG_STATUS <<EOF - -CONFIG_FILES=\${CONFIG_FILES-"Makefile"} -EOF -cat >> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; - esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* - -EOF -cat >> $CONFIG_STATUS <<EOF - -EOF -cat >> $CONFIG_STATUS <<\EOF - -exit 0 -EOF -chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - diff --git a/contrib/gperf/tests/configure.in b/contrib/gperf/tests/configure.in deleted file mode 100644 index a62450d903e8..000000000000 --- a/contrib/gperf/tests/configure.in +++ /dev/null @@ -1,45 +0,0 @@ -dnl autoconf configuration for gperf/tests - -dnl Copyright (C) 1998 Free Software Foundation, Inc. -dnl written by Douglas C. Schmidt (schmidt@ics.uci.edu) -dnl -dnl This file is part of GNU GPERF. -dnl -dnl GNU GPERF is free software; you can redistribute it and/or modify -dnl it under the terms of the GNU General Public License as published by -dnl the Free Software Foundation; either version 1, or (at your option) -dnl any later version. -dnl -dnl GNU GPERF is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -dnl GNU General Public License for more details. -dnl -dnl You should have received a copy of the GNU General Public License -dnl along with GNU GPERF; see the file COPYING. If not, write to the -dnl Free Software Foundation, 59 Temple Place - Suite 330, Boston, -dnl MA 02111-1307, USA. - -AC_INIT(c-parse.gperf) -AC_PROG_MAKE_SET -dnl -dnl checks for programs -dnl -AC_PROG_CC - dnl sets variable CC -AC_PROG_CPP - dnl sets variable CPP -AC_PROG_CXX - dnl sets variable CXX -AC_PROG_CXXCPP - dnl sets variable CXXCPP -if test $ac_cv_prog_gcc = yes -a $ac_cv_prog_gxx = yes; then - CHECK_LANG_SYNTAX='check-lang-syntax' -else - CHECK_LANG_SYNTAX='' -fi -AC_SUBST(CHECK_LANG_SYNTAX) -dnl -dnl That's it. -dnl -AC_OUTPUT(Makefile) diff --git a/contrib/gperf/tests/irc.gperf b/contrib/gperf/tests/irc.gperf deleted file mode 100644 index afe53c59e7db..000000000000 --- a/contrib/gperf/tests/irc.gperf +++ /dev/null @@ -1,63 +0,0 @@ -%{ -extern int m_text(), m_private(), m_who(), m_whois(), m_user(), m_list(); -extern int m_topic(), m_invite(), m_channel(), m_version(), m_quit(); -extern int m_server(), m_kill(), m_info(), m_links(), m_summon(), m_stats(); -extern int m_users(), m_nick(), m_error(), m_help(), m_whoreply(); -extern int m_squit(), m_restart(), m_away(), m_die(), m_connect(); -extern int m_ping(), m_pong(), m_oper(), m_pass(), m_wall(), m_trace(); -extern int m_time(), m_rehash(), m_names(), m_namreply(), m_admin(); -extern int m_linreply(), m_notice(), m_lusers(), m_voice(), m_grph(); -extern int m_xtra(), m_motd(); -%} -struct Message { - char *cmd; - int (* func)(); - int count; - int parameters; -}; -%% -NICK, m_nick, 0, 1 -MSG, m_text, 0, 1 -PRIVMSG, m_private, 0, 2 -WHO, m_who, 0, 1 -WHOIS, m_whois, 0, 4 -USER, m_user, 0, 4 -SERVER, m_server, 0, 2 -LIST, m_list, 0, 1 -TOPIC, m_topic, 0, 1 -INVITE, m_invite, 0, 2 -CHANNEL, m_channel, 0, 1 -VERSION, m_version, 0, 1 -QUIT, m_quit, 0, 2 -SQUIT, m_squit, 0, 2 -KILL, m_kill, 0, 2 -INFO, m_info, 0, 1 -LINKS, m_links, 0, 1 -SUMMON, m_summon, 0, 1 -STATS, m_stats, 0, 1 -USERS, m_users, 0, 1 -RESTART, m_restart, 0, 1 -WHOREPLY,m_whoreply, 0, 7 -HELP, m_help, 0, 2 -ERROR, m_error, 0, 1 -AWAY, m_away, 0, 1 -DIE, m_die, 0, 1 -CONNECT, m_connect, 0, 3 -PING, m_ping, 0, 2 -PONG, m_pong, 0, 3 -OPER, m_oper, 0, 3 -PASS, m_pass, 0, 2 -WALL, m_wall, 0, 1 -TIME, m_time, 0, 1 -REHASH, m_rehash, 0, 1 -NAMES, m_names, 0, 1 -NAMREPLY,m_namreply, 0, 3 -ADMIN, m_admin, 0, 1 -TRACE, m_trace, 0, 1 -LINREPLY,m_linreply, 0, 2 -NOTICE, m_notice, 0, 2 -LUSERS, m_lusers, 0, 1 -VOICE, m_voice, 0, 2 -GRPH, m_grph, 0, 2 -XTRA, m_xtra, 0, 2 -MOTD, m_motd, 0, 2 diff --git a/contrib/gperf/tests/jscript.gperf b/contrib/gperf/tests/jscript.gperf deleted file mode 100644 index 6f420d8883ba..000000000000 --- a/contrib/gperf/tests/jscript.gperf +++ /dev/null @@ -1,73 +0,0 @@ -%{ -/* Command-line: gperf -k'1,2,$' -t -p -K 'name' -H 'js_kw_hash' -N 'js_kw_lookup' -a -g jscript.gperf */ -%} -struct js_keyword { - char * name; - int token; -} - -%% -# Javascript reserved words, see "keywords.html" -abstract, TK_ABSTRACT -boolean, TK_BOOLEAN -break, TK_BREAK -byte, TK_BYTE -case, TK_CASE -catch, TK_CATCH -char, TK_CHAR -class, TK_CLASS -const, TK_CONST -continue, TK_CONTINUE -default, TK_DEFAULT -do, TK_DO -double, TK_DOUBLE -else, TK_ELSE -extends, TK_EXTENDS -false, TK_FALSE -final, TK_FINAL -finally, TK_FINALLY -float, TK_FLOAT -for, TK_FOR -function, TK_FUNCTION -goto, TK_GOTO -if, TK_IF -implements, TK_IMPLEMENTS -import, TK_IMPORT -in, TK_IN -instanceof, TK_INSTANCEOF -int, TK_INT -interface, TK_INTERFACE -long, TK_LONG -native, TK_NATIVE -new, TK_NEW -null, TK_NULL -package, TK_PACKAGE -private, TK_PRIVATE -protected, TK_PROTECTED -public, TK_PUBLIC -return, TK_RETURN -short, TK_SHORT -static, TK_STATIC -super, TK_SUPER -switch, TK_SWITCH -synchronized, TK_SYNCHRONIZED -this, TK_THIS -throw, TK_THROW -throws, TK_THROWS -transient, TK_TRANSIENT -true, TK_TRUE -try, TK_TRY -var, TK_VAR -void, TK_VOID -while, TK_WHILE -with, TK_WITH -%% - -int js_keyword_lookup (register const char *str, register int len) -{ - struct js_keyword * keyword = js_kw_lookup(str,len); - if (keyword) - return keyword->token; - else - return TK_IDENT; -} diff --git a/contrib/gperf/tests/jstest1.gperf b/contrib/gperf/tests/jstest1.gperf deleted file mode 100644 index f6696b186858..000000000000 --- a/contrib/gperf/tests/jstest1.gperf +++ /dev/null @@ -1,142 +0,0 @@ -abstract -boolean -break -byte -case -catch -char -class -const -continue -default -do -double -else -extends -false -final -finally -float -for -function -goto -if -implements -import -in -instanceof -int -interface -long -native -new -null -package -private -protected -public -return -short -static -super -switch -synchronized -this -throw -throws -transient -true -try -var -void -while -with -%% -#include <stdlib.h> -#include <string.h> -#if defined(__STDC__) || defined(__cplusplus) -#define CONST const -#else -#define CONST -#endif -static CONST char* testdata[] = { - "bogus", - "abstract", - "boolean", - "break", - "byte", - "case", - "catch", - "char", - "class", - "const", - "continue", - "default", - "do", - "double", - "else", - "extends", - "false", - "final", - "finally", - "float", - "for", - "function", - "goto", - "if", - "implements", - "import", - "in", - "instanceof", - "int", - "interface", - "long", - "native", - "new", - "null", - "package", - "private", - "protected", - "public", - "return", - "short", - "static", - "super", - "switch", - "synchronized", - "this", - "throw", - "throws", - "transient", - "true", - "try", - "var", - "void", - "while", - "with" -}; -int main () -{ - int i; - for (i = 0; i < sizeof(testdata)/sizeof(testdata[0]); i++) - { -#ifdef CPLUSPLUS_TEST - CONST char * resword = Perfect_Hash::in_word_set(testdata[i],strlen(testdata[i])); -#else - CONST char * resword = in_word_set(testdata[i],strlen(testdata[i])); -#endif - if (i > 0) - { - if (!resword) - exit (1); - if (strcmp(testdata[i],resword)) - exit (1); - } - else - { - if (resword) - exit (1); - } - } - return 0; -} diff --git a/contrib/gperf/tests/jstest2.gperf b/contrib/gperf/tests/jstest2.gperf deleted file mode 100644 index ee0fa7fde414..000000000000 --- a/contrib/gperf/tests/jstest2.gperf +++ /dev/null @@ -1,147 +0,0 @@ -struct js_keyword { - char * name; - int token; -} -%% -abstract, 1 -boolean, 2 -break, 3 -byte, 4 -case, 5 -catch, 6 -char, 7 -class, 8 -const, 9 -continue, 10 -default, 11 -do, 12 -double, 13 -else, 14 -extends, 15 -false, 16 -final, 17 -finally, 18 -float, 19 -for, 20 -function, 21 -goto, 22 -if, 23 -implements, 24 -import, 25 -in, 26 -instanceof, 27 -int, 28 -interface, 29 -long, 30 -native, 31 -new, 32 -null, 33 -package, 34 -private, 35 -protected, 36 -public, 37 -return, 38 -short, 39 -static, 40 -super, 41 -switch, 42 -synchronized, 43 -this, 44 -throw, 45 -throws, 46 -transient, 47 -true, 48 -try, 49 -var, 50 -void, 51 -while, 52 -with, 53 -%% -#include <stdlib.h> -#include <string.h> -#if defined(__STDC__) || defined(__cplusplus) -#define CONST const -#else -#define CONST -#endif -static CONST char* testdata[] = { - "bogus", - "abstract", - "boolean", - "break", - "byte", - "case", - "catch", - "char", - "class", - "const", - "continue", - "default", - "do", - "double", - "else", - "extends", - "false", - "final", - "finally", - "float", - "for", - "function", - "goto", - "if", - "implements", - "import", - "in", - "instanceof", - "int", - "interface", - "long", - "native", - "new", - "null", - "package", - "private", - "protected", - "public", - "return", - "short", - "static", - "super", - "switch", - "synchronized", - "this", - "throw", - "throws", - "transient", - "true", - "try", - "var", - "void", - "while", - "with" -}; -int main () -{ - int i; - for (i = 0; i < sizeof(testdata)/sizeof(testdata[0]); i++) - { -#ifdef CPLUSPLUS_TEST - CONST struct js_keyword * resword = Perfect_Hash::in_word_set(testdata[i],strlen(testdata[i])); -#else - CONST struct js_keyword * resword = in_word_set(testdata[i],strlen(testdata[i])); -#endif - if (i > 0) - { - if (!resword) - exit (1); - if (strcmp(testdata[i],resword->name)) - exit (1); - } - else - { - if (resword) - exit (1); - } - } - return 0; -} diff --git a/contrib/gperf/tests/jstest3.gperf b/contrib/gperf/tests/jstest3.gperf deleted file mode 100644 index 54d37ce0e8cf..000000000000 --- a/contrib/gperf/tests/jstest3.gperf +++ /dev/null @@ -1,147 +0,0 @@ -struct js_keyword { - const char * name; - int token; -} -%% -abstract, 1 -boolean, 2 -break, 3 -byte, 4 -case, 5 -catch, 6 -char, 7 -class, 8 -const, 9 -continue, 10 -default, 11 -do, 12 -double, 13 -else, 14 -extends, 15 -false, 16 -final, 17 -finally, 18 -float, 19 -for, 20 -function, 21 -goto, 22 -if, 23 -implements, 24 -import, 25 -in, 26 -instanceof, 27 -int, 28 -interface, 29 -long, 30 -native, 31 -new, 32 -null, 33 -package, 34 -private, 35 -protected, 36 -public, 37 -return, 38 -short, 39 -static, 40 -super, 41 -switch, 42 -synchronized, 43 -this, 44 -throw, 45 -throws, 46 -transient, 47 -true, 48 -try, 49 -var, 50 -void, 51 -while, 52 -with, 53 -%% -#include <stdlib.h> -#include <string.h> -#if defined(__STDC__) || defined(__cplusplus) -#define CONST const -#else -#define CONST -#endif -static CONST char* testdata[] = { - "bogus", - "abstract", - "boolean", - "break", - "byte", - "case", - "catch", - "char", - "class", - "const", - "continue", - "default", - "do", - "double", - "else", - "extends", - "false", - "final", - "finally", - "float", - "for", - "function", - "goto", - "if", - "implements", - "import", - "in", - "instanceof", - "int", - "interface", - "long", - "native", - "new", - "null", - "package", - "private", - "protected", - "public", - "return", - "short", - "static", - "super", - "switch", - "synchronized", - "this", - "throw", - "throws", - "transient", - "true", - "try", - "var", - "void", - "while", - "with" -}; -int main () -{ - int i; - for (i = 0; i < sizeof(testdata)/sizeof(testdata[0]); i++) - { -#ifdef CPLUSPLUS_TEST - CONST struct js_keyword * resword = Perfect_Hash::in_word_set(testdata[i],strlen(testdata[i])); -#else - CONST struct js_keyword * resword = in_word_set(testdata[i],strlen(testdata[i])); -#endif - if (i > 0) - { - if (!resword) - exit (1); - if (strcmp(testdata[i],resword->name)) - exit (1); - } - else - { - if (resword) - exit (1); - } - } - return 0; -} diff --git a/contrib/gperf/tests/makeinfo.gperf b/contrib/gperf/tests/makeinfo.gperf deleted file mode 100644 index 1488b8e38fbe..000000000000 --- a/contrib/gperf/tests/makeinfo.gperf +++ /dev/null @@ -1,116 +0,0 @@ -COMMAND; -%% -!, cm_force_sentence_end, false -', insert_self, false -*, cm_asterisk, false -., cm_force_sentence_end, false -:, cm_force_abbreviated_whitespace, false -?, cm_force_sentence_end, false -@, insert_self, false -TeX, cm_TeX, true -`, insert_self, false -appendix, cm_appendix, false -appendixsec, cm_appendixsec, false -appendixsubsec, cm_appendixsubsec, false -asis, cm_asis, true -b, cm_bold, true -br, cm_br, false -bullet, cm_bullet, true -bye, cm_bye, false -c, cm_comment, false -center, cm_center, false -chapter, cm_chapter, false -cindex, cm_cindex, false -cite, cm_cite, true -code, cm_code, true -comment, cm_comment, false -contents, do_nothing, false -copyright, cm_copyright, true -ctrl, cm_ctrl, true -defcodeindex, cm_defindex, false -defindex, cm_defindex, false -dfn, cm_dfn, true -display, cm_display, false -dots, cm_dots, true -emph, cm_emph, true -end, cm_end, false -enumerate, cm_enumerate, false -equiv, cm_equiv, true -error, cm_error, true -example, cm_example, false -exdent, cm_exdent, false -expansion, cm_expansion, true -file, cm_file, true -findex, cm_findex, false -format, cm_format, false -group, cm_group, false -i, cm_italic, true -iappendix, cm_appendix, false -iappendixsec, cm_appendixsec, false -iappendixsubsec, cm_appendixsubsec, false -ichapter, cm_chapter, false -ifinfo, cm_ifinfo, false -iftex, cm_iftex, false -ignore, cm_ignore, false -include, cm_include, false -inforef, cm_inforef, true -input, cm_include, false -isection, cm_section, false -isubsection, cm_subsection, false -isubsubsection, cm_subsubsection, false -item, cm_item, false -itemize, cm_itemize, false -itemx, cm_itemx, false -iunnumbered, cm_unnumbered, false -iunnumberedsec, cm_unnumberedsec, false -iunnumberedsubsec, cm_unnumberedsubsec, false -kbd, cm_kbd, true -key, cm_key, true -kindex, cm_kindex, false -lisp, cm_lisp, false -menu, cm_menu -minus, cm_minus, true -need, cm_need, false -node, cm_node, false -noindent, cm_noindent, false -page, do_nothing, false -pindex, cm_pindex, false -point, cm_point, true -print, cm_print, true -printindex, cm_printindex, false -pxref, cm_pxref, true -quotation, cm_quotation, false -r, cm_roman, true -ref, cm_xref, true -refill, cm_refill, false -result, cm_result, true -samp, cm_samp, true -sc, cm_sc, true -section, cm_section, false -setchapternewpage, cm_setchapternewpage, false -setfilename, cm_setfilename, false -settitle, cm_settitle, false -smallexample, cm_smallexample, false -sp, cm_sp, false -strong, cm_strong, true -subsection, cm_subsection, false -subsubsection, cm_subsubsection, false -summarycontents, do_nothing, false -syncodeindex, cm_synindex, false -synindex, cm_synindex, false -t, cm_title, true -table, cm_table, false -tex, cm_tex, false -tindex, cm_tindex, false -titlepage, cm_titlepage, false -unnumbered, cm_unnumbered, false -unnumberedsec, cm_unnumberedsec, false -unnumberedsubsec, cm_unnumberedsubsec, false -var, cm_var, true -vindex, cm_vindex, false -w, cm_w, true -xref, cm_xref, true -{, insert_self, false -}, insert_self, false -infoinclude, cm_infoinclude, false -footnote, cm_footnote, false diff --git a/contrib/gperf/tests/modula.exp b/contrib/gperf/tests/modula.exp deleted file mode 100644 index cef7d5acad8b..000000000000 --- a/contrib/gperf/tests/modula.exp +++ /dev/null @@ -1,106 +0,0 @@ -in word set AND -in word set ARRAY -in word set BEGIN -in word set BITS -in word set BY -in word set CASE -in word set CONST -in word set DIV -in word set DO -in word set ELSE -in word set ELSIF -in word set END -in word set EVAL -in word set EXCEPT -in word set EXCEPTION -in word set EXIT -in word set EXPORTS -in word set FINALLY -in word set FOR -in word set FROM -in word set IF -in word set IMPORT -in word set INTERFACE -in word set IN -in word set INLINE -in word set LOCK -in word set METHODS -in word set MOD -in word set MODULE -in word set NOT -in word set OBJECT -in word set OF -in word set OR -in word set PROCEDURE -in word set RAISES -in word set READONLY -in word set RECORD -in word set REF -in word set REPEAT -in word set RETURN -in word set SET -in word set THEN -in word set TO -in word set TRY -in word set TYPE -in word set TYPECASE -in word set UNSAFE -in word set UNTIL -in word set UNTRACED -in word set VALUE -in word set VAR -in word set WHILE -in word set WITH -in word set and -in word set array -in word set begin -in word set bits -in word set by -in word set case -in word set const -in word set div -in word set do -in word set else -in word set elsif -in word set end -in word set eval -in word set except -in word set exception -in word set exit -in word set exports -in word set finally -in word set for -in word set from -in word set if -in word set import -in word set interface -in word set in -in word set inline -in word set lock -in word set methods -in word set mod -in word set module -in word set not -in word set object -in word set of -in word set or -in word set procedure -in word set raises -in word set readonly -in word set record -in word set ref -in word set repeat -in word set return -in word set set -in word set then -in word set to -in word set try -in word set type -in word set typecase -in word set unsafe -in word set until -in word set untraced -in word set value -in word set var -in word set while -in word set with diff --git a/contrib/gperf/tests/pascal.exp b/contrib/gperf/tests/pascal.exp deleted file mode 100644 index 765e44c6a0fe..000000000000 --- a/contrib/gperf/tests/pascal.exp +++ /dev/null @@ -1,36 +0,0 @@ -in word set with -in word set array -in word set and -in word set function -in word set case -in word set var -in word set const -in word set until -in word set then -in word set set -in word set record -in word set program -in word set procedure -in word set or -in word set packed -in word set not -in word set nil -in word set label -in word set in -in word set repeat -in word set of -in word set goto -in word set forward -in word set for -in word set while -in word set file -in word set else -in word set downto -in word set do -in word set div -in word set to -in word set type -in word set end -in word set mod -in word set begin -in word set if diff --git a/contrib/gperf/tests/test-1.exp b/contrib/gperf/tests/test-1.exp deleted file mode 100644 index 462fea5d0ec5..000000000000 --- a/contrib/gperf/tests/test-1.exp +++ /dev/null @@ -1,153 +0,0 @@ -/* C code produced by gperf version 2.7 */ -/* Command-line: ../src/gperf -p -j1 -g -o -t -N is_reserved_word -k1,3,$ */ -/* Command-line: gperf -p -j1 -i 1 -g -o -t -N is_reserved_word -k1,3,$ c-parse.gperf */ -struct resword { char *name; short token; enum rid rid; }; - -#define TOTAL_KEYWORDS 51 -#define MIN_WORD_LENGTH 2 -#define MAX_WORD_LENGTH 13 -#define MIN_HASH_VALUE 8 -#define MAX_HASH_VALUE 82 -/* maximum key range = 75, duplicates = 0 */ - -#ifdef __GNUC__ -__inline -#endif -static unsigned int -hash (str, len) - register const char *str; - register unsigned int len; -{ - static unsigned char asso_values[] = - { - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 0, 83, 1, 2, 34, - 19, 6, 11, 29, 0, 17, 83, 0, 23, 28, - 26, 30, 31, 83, 15, 1, 0, 28, 13, 4, - 83, 83, 5, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83 - }; - register int hval = len; - - switch (hval) - { - default: - case 3: - hval += asso_values[(unsigned char)str[2]]; - case 2: - case 1: - hval += asso_values[(unsigned char)str[0]]; - break; - } - return hval + asso_values[(unsigned char)str[len - 1]]; -} - -#ifdef __GNUC__ -__inline -#endif -struct resword * -is_reserved_word (str, len) - register const char *str; - register unsigned int len; -{ - static struct resword wordlist[] = - { - {""}, {""}, {""}, {""}, {""}, {""}, {""}, {""}, - {"__asm__", ASM, NORID}, - {""}, - {"__typeof__", TYPEOF, NORID}, - {"__signed__", TYPESPEC, RID_SIGNED}, - {"__alignof__", ALIGNOF, NORID}, - {"break", BREAK, NORID}, - {"__attribute__", ATTRIBUTE, NORID}, - {""}, {""}, - {"else", ELSE, NORID}, - {"__attribute", ATTRIBUTE, NORID}, - {"__typeof", TYPEOF, NORID}, - {"int", TYPESPEC, RID_INT}, - {"__alignof", ALIGNOF, NORID}, - {"struct", STRUCT, NORID}, - {"sizeof", SIZEOF, NORID}, - {"switch", SWITCH, NORID}, - {"__volatile__", TYPE_QUAL, RID_VOLATILE}, - {""}, - {"__inline__", SCSPEC, RID_INLINE}, - {"__signed", TYPESPEC, RID_SIGNED}, - {"__volatile", TYPE_QUAL, RID_VOLATILE}, - {"if", IF, NORID}, - {"__inline", SCSPEC, RID_INLINE}, - {"while", WHILE, NORID}, - {""}, - {"__asm", ASM, NORID}, - {"auto", SCSPEC, RID_AUTO}, - {"short", TYPESPEC, RID_SHORT}, - {"default", DEFAULT, NORID}, - {"extern", SCSPEC, RID_EXTERN}, - {""}, {""}, - {"__const", TYPE_QUAL, RID_CONST}, - {"static", SCSPEC, RID_STATIC}, - {"__const__", TYPE_QUAL, RID_CONST}, - {"for", FOR, NORID}, - {"case", CASE, NORID}, - {"float", TYPESPEC, RID_FLOAT}, - {"return", RETURN, NORID}, - {"typeof", TYPEOF, NORID}, - {"typedef", SCSPEC, RID_TYPEDEF}, - {"volatile", TYPE_QUAL, RID_VOLATILE}, - {"do", DO, NORID}, - {"inline", SCSPEC, RID_INLINE}, - {"void", TYPESPEC, RID_VOID}, - {"char", TYPESPEC, RID_CHAR}, - {"signed", TYPESPEC, RID_SIGNED}, - {"unsigned", TYPESPEC, RID_UNSIGNED}, - {""}, {""}, - {"double", TYPESPEC, RID_DOUBLE}, - {"asm", ASM, NORID}, - {""}, {""}, - {"goto", GOTO, NORID}, - {""}, - {"const", TYPE_QUAL, RID_CONST}, - {"enum", ENUM, NORID}, - {"register", SCSPEC, RID_REGISTER}, - {""}, {""}, {""}, {""}, {""}, {""}, - {"continue", CONTINUE, NORID}, - {""}, - {"union", UNION, NORID}, - {""}, {""}, {""}, {""}, {""}, - {"long", TYPESPEC, RID_LONG} - }; - - if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) - { - register int key = hash (str, len); - - if (key <= MAX_HASH_VALUE && key >= 0) - { - register const char *s = wordlist[key].name; - - if (*str == *s && !strcmp (str + 1, s + 1)) - return &wordlist[key]; - } - } - return 0; -} diff --git a/contrib/gperf/tests/test-2.exp b/contrib/gperf/tests/test-2.exp deleted file mode 100644 index 3b9e7b094131..000000000000 --- a/contrib/gperf/tests/test-2.exp +++ /dev/null @@ -1,202 +0,0 @@ -/* C code produced by gperf version 2.7 */ -/* Command-line: ../src/gperf -n -k1-8 -l */ - -#define TOTAL_KEYWORDS 40 -#define MIN_WORD_LENGTH 2 -#define MAX_WORD_LENGTH 14 -#define MIN_HASH_VALUE 1 -#define MAX_HASH_VALUE 256 -/* maximum key range = 256, duplicates = 0 */ - -#ifdef __GNUC__ -__inline -#endif -static unsigned int -hash (str, len) - register const char *str; - register unsigned int len; -{ - static unsigned short asso_values[] = - { - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 25, 30, 35, 21, 0, - 30, 15, 30, 45, 257, 257, 0, 5, 45, 0, - 10, 0, 1, 20, 25, 15, 30, 40, 15, 5, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257, 257, 257, 257, 257, - 257, 257, 257, 257, 257, 257 - }; - register int hval = 0; - - switch (len) - { - default: - case 8: - hval += asso_values[(unsigned char)str[7]]; - case 7: - hval += asso_values[(unsigned char)str[6]]; - case 6: - hval += asso_values[(unsigned char)str[5]]; - case 5: - hval += asso_values[(unsigned char)str[4]]; - case 4: - hval += asso_values[(unsigned char)str[3]]; - case 3: - hval += asso_values[(unsigned char)str[2]]; - case 2: - hval += asso_values[(unsigned char)str[1]]; - case 1: - hval += asso_values[(unsigned char)str[0]]; - break; - } - return hval; -} - -#ifdef __GNUC__ -__inline -#endif -const char * -in_word_set (str, len) - register const char *str; - register unsigned int len; -{ - static unsigned char lengthtable[] = - { - 0, 2, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 4, 2, 0, 0, 0, 2, 3, 0, - 0, 0, 2, 3, 0, 0, 0, 2, 4, 0, 0, 0, 4, 6, - 0, 0, 0, 3, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, - 3, 5, 6, 0, 0, 6, 0, 0, 0, 0, 3, 0, 0, 0, - 3, 0, 0, 0, 0, 2, 0, 0, 0, 0, 4, 0, 0, 9, - 0, 4, 6, 6, 0, 0, 2, 3, 0, 0, 0, 5, 3, 0, - 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 14, 0, - 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 5, - 7, 0, 0, 0, 5, 0, 0, 0, 0, 5, 0, 0, 0, 0, - 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 9, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 10 - }; - static const char * wordlist[] = - { - "", - "OR", - "", "", "", "", "", "", "", "", - "LOOP", - "", "", "", "", "", "", "", "", "", - "ELSE", - "DO", - "", "", "", - "TO", - "MOD", - "", "", "", - "OF", - "FOR", - "", "", "", - "BY", - "FROM", - "", "", "", - "TYPE", - "MODULE", - "", "", "", - "SET", - "", "", "", "", "", - "EXPORT", - "", "", "", "", - "VAR", - "ARRAY", - "RECORD", - "", "", - "REPEAT", - "", "", "", "", - "END", - "", "", "", - "NOT", - "", "", "", "", - "IF", - "", "", "", "", - "CASE", - "", "", - "PROCEDURE", - "", - "EXIT", - "IMPORT", - "RETURN", - "", "", - "IN", - "AND", - "", "", "", - "ELSIF", - "DIV", - "", "", "", - "THEN", - "", "", "", "", "", "", "", "", "", - "IMPLEMENTATION", - "", "", "", "", - "WHILE", - "", "", "", "", "", "", "", "", "", - "CONST", - "POINTER", - "", "", "", - "UNTIL", - "", "", "", "", - "BEGIN", - "", "", "", "", - "WITH", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", - "", - "QUALIFIED", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", - "", "", "", "", "", - "DEFINITION" - }; - - if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) - { - register int key = hash (str, len); - - if (key <= MAX_HASH_VALUE && key >= 0) - if (len == lengthtable[key]) - { - register const char *s = wordlist[key]; - - if (*str == *s && !strcmp (str + 1, s + 1)) - return s; - } - } - return 0; -} diff --git a/contrib/gperf/tests/test-3.exp b/contrib/gperf/tests/test-3.exp deleted file mode 100644 index fe0a1a6dafdf..000000000000 --- a/contrib/gperf/tests/test-3.exp +++ /dev/null @@ -1,186 +0,0 @@ -/* C code produced by gperf version 2.7 */ -/* Command-line: ../src/gperf -p -j 1 -o -a -C -g -t -k1,4,$ */ -/* Command-line: gperf -p -j1 -g -o -t -N is_reserved_word -k1,4,$ gplus.gperf */ -struct resword { char *name; short token; enum rid rid;}; - -#define TOTAL_KEYWORDS 71 -#define MIN_WORD_LENGTH 2 -#define MAX_WORD_LENGTH 13 -#define MIN_HASH_VALUE 4 -#define MAX_HASH_VALUE 147 -/* maximum key range = 144, duplicates = 0 */ - -#ifdef __GNUC__ -__inline -#endif -static unsigned int -hash (str, len) - register const char *str; - register unsigned int len; -{ - static const unsigned char asso_values[] = - { - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 0, 148, 19, 6, 27, - 37, 0, 12, 1, 15, 63, 148, 4, 0, 56, - 20, 15, 42, 148, 31, 5, 26, 39, 32, 10, - 148, 40, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148, 148, 148, 148, 148, - 148, 148, 148, 148, 148, 148 - }; - register int hval = len; - - switch (hval) - { - default: - case 4: - hval += asso_values[(unsigned char)str[3]]; - case 3: - case 2: - case 1: - hval += asso_values[(unsigned char)str[0]]; - break; - } - return hval + asso_values[(unsigned char)str[len - 1]]; -} - -#ifdef __GNUC__ -__inline -#endif -const struct resword * -in_word_set (str, len) - register const char *str; - register unsigned int len; -{ - static const struct resword wordlist[] = - { - {""}, {""}, {""}, {""}, - {"else", ELSE, NORID,}, - {""}, - {"long", TYPESPEC, RID_LONG,}, - {""}, {""}, {""}, {""}, - {"__alignof__", ALIGNOF, NORID}, - {"__asm__", ASM, NORID}, - {""}, {""}, - {"while", WHILE, NORID,}, - {""}, {""}, {""}, {""}, {""}, - {"__alignof", ALIGNOF, NORID}, - {"all", ALL, NORID /* Extension */,}, - {"sizeof", SIZEOF, NORID,}, - {"__const__", TYPE_QUAL, RID_CONST}, - {"__volatile", TYPE_QUAL, RID_VOLATILE}, - {"extern", SCSPEC, RID_EXTERN,}, - {"__volatile__", TYPE_QUAL, RID_VOLATILE}, - {"__inline", SCSPEC, RID_INLINE}, - {"exception", AGGR, RID_EXCEPTION /* Extension */,}, - {"__inline__", SCSPEC, RID_INLINE}, - {"case", CASE, NORID,}, - {"except", EXCEPT, NORID /* Extension */,}, - {"new", NEW, NORID,}, - {"break", BREAK, NORID,}, - {"goto", GOTO, NORID,}, - {""}, - {"__attribute", ATTRIBUTE, NORID}, - {""}, - {"__attribute__", ATTRIBUTE, NORID}, - {"this", THIS, NORID,}, - {"raise", RAISE, NORID /* Extension */,}, - {"class", AGGR, RID_CLASS,}, - {"delete", DELETE, NORID,}, - {"typeof", TYPEOF, NORID,}, - {"typedef", SCSPEC, RID_TYPEDEF,}, - {"for", FOR, NORID,}, - {"raises", RAISES, NORID /* Extension */,}, - {"__const", TYPE_QUAL, RID_CONST}, - {"double", TYPESPEC, RID_DOUBLE,}, - {"__typeof__", TYPEOF, NORID}, - {""}, - {"switch", SWITCH, NORID,}, - {"auto", SCSPEC, RID_AUTO,}, - {"do", DO, NORID,}, - {"friend", SCSPEC, RID_FRIEND,}, - {""}, - {"reraise", RERAISE, NORID /* Extension */,}, - {""}, - {"volatile", TYPE_QUAL, RID_VOLATILE,}, - {"__typeof", TYPEOF, NORID}, - {"continue", CONTINUE, NORID,}, - {"float", TYPESPEC, RID_FLOAT,}, - {"const", TYPE_QUAL, RID_CONST,}, - {"static", SCSPEC, RID_STATIC,}, - {"virtual", SCSPEC, RID_VIRTUAL,}, - {"__asm", ASM, NORID}, - {"short", TYPESPEC, RID_SHORT,}, - {"signed", TYPESPEC, RID_SIGNED,}, - {"try", TRY, NORID /* Extension */,}, - {""}, {""}, {""}, - {"__signed__", TYPESPEC, RID_SIGNED}, - {"catch", CATCH, NORID,}, - {"public", PUBLIC, NORID,}, - {"struct", AGGR, RID_RECORD,}, - {"if", IF, NORID,}, - {"asm", ASM, NORID,}, - {"union", AGGR, RID_UNION,}, - {""}, - {"private", PRIVATE, NORID,}, - {""}, {""}, {""}, - {"operator", OPERATOR, NORID,}, - {""}, {""}, {""}, - {"default", DEFAULT, NORID,}, - {"dynamic", DYNAMIC, NORID,}, - {"overload", OVERLOAD, NORID,}, - {"int", TYPESPEC, RID_INT,}, - {"char", TYPESPEC, RID_CHAR,}, - {""}, {""}, - {"return", RETURN, NORID,}, - {""}, {""}, {""}, {""}, {""}, {""}, {""}, {""}, {""}, - {""}, {""}, - {"__signed", TYPESPEC, RID_SIGNED}, - {""}, - {"void", TYPESPEC, RID_VOID,}, - {""}, {""}, {""}, - {"protected", PROTECTED, NORID,}, - {""}, - {"enum", ENUM, NORID,}, - {""}, {""}, {""}, {""}, {""}, {""}, {""}, {""}, {""}, - {""}, {""}, {""}, {""}, {""}, {""}, - {"inline", SCSPEC, RID_INLINE,}, - {"register", SCSPEC, RID_REGISTER,}, - {""}, {""}, {""}, {""}, {""}, {""}, {""}, {""}, {""}, - {""}, {""}, {""}, {""}, - {"unsigned", TYPESPEC, RID_UNSIGNED,} - }; - - if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) - { - register int key = hash (str, len); - - if (key <= MAX_HASH_VALUE && key >= 0) - { - register const char *s = wordlist[key].name; - - if (*str == *s && !strcmp (str + 1, s + 1)) - return &wordlist[key]; - } - } - return 0; -} diff --git a/contrib/gperf/tests/test-4.exp b/contrib/gperf/tests/test-4.exp deleted file mode 100644 index b5279688714d..000000000000 --- a/contrib/gperf/tests/test-4.exp +++ /dev/null @@ -1,162 +0,0 @@ -/* C code produced by gperf version 2.7 */ -/* Command-line: ../src/gperf -D -p -t */ -/* Command-line: gperf -p -j1 -i 1 -g -o -t -N is_reserved_word -k1,3,$ c-parse.gperf */ -struct resword { char *name; short token; enum rid rid; }; - -#define TOTAL_KEYWORDS 51 -#define MIN_WORD_LENGTH 2 -#define MAX_WORD_LENGTH 13 -#define MIN_HASH_VALUE 4 -#define MAX_HASH_VALUE 82 -/* maximum key range = 79, duplicates = 2 */ - -#ifdef __GNUC__ -__inline -#endif -static unsigned int -hash (str, len) - register const char *str; - register unsigned int len; -{ - static unsigned char asso_values[] = - { - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 0, 83, 40, 20, 50, - 25, 10, 30, 0, 0, 50, 83, 0, 15, 0, - 35, 0, 83, 83, 20, 0, 10, 40, 5, 15, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83, 83, 83, 83, 83, - 83, 83, 83, 83, 83, 83 - }; - return len + asso_values[(unsigned char)str[len - 1]] + asso_values[(unsigned char)str[0]]; -} - -#ifdef __GNUC__ -__inline -#endif -struct resword * -in_word_set (str, len) - register const char *str; - register unsigned int len; -{ - static struct resword wordlist[] = - { - {"goto", GOTO, NORID}, - {"__asm", ASM, NORID}, - {"switch", SWITCH, NORID}, - {"__asm__", ASM, NORID}, - {"__const__", TYPE_QUAL, RID_CONST}, - {"__inline__", SCSPEC, RID_INLINE}, - {"__typeof__", TYPEOF, NORID}, - {"__signed__", TYPESPEC, RID_SIGNED}, - {"__alignof__", ALIGNOF, NORID}, - {"__volatile__", TYPE_QUAL, RID_VOLATILE}, - {"__attribute__", ATTRIBUTE, NORID}, - {"enum", ENUM, NORID}, - {"short", TYPESPEC, RID_SHORT}, - {"struct", STRUCT, NORID}, - {"__const", TYPE_QUAL, RID_CONST}, - {"__inline", SCSPEC, RID_INLINE}, - {"long", TYPESPEC, RID_LONG}, - {"__volatile", TYPE_QUAL, RID_VOLATILE}, - {"__attribute", ATTRIBUTE, NORID}, - {"volatile", TYPE_QUAL, RID_VOLATILE}, - {"else", ELSE, NORID}, - {"break", BREAK, NORID}, - {"do", DO, NORID}, - {"while", WHILE, NORID}, - {"signed", TYPESPEC, RID_SIGNED}, - {"__signed", TYPESPEC, RID_SIGNED}, - {"void", TYPESPEC, RID_VOID}, - {"sizeof", SIZEOF, NORID}, - {"__typeof", TYPEOF, NORID}, - {"__alignof", ALIGNOF, NORID}, - {"double", TYPESPEC, RID_DOUBLE}, - {"default", DEFAULT, NORID}, - {"asm", ASM, NORID}, - {"auto", SCSPEC, RID_AUTO}, - {"float", TYPESPEC, RID_FLOAT}, - {"typeof", TYPEOF, NORID}, - {"typedef", SCSPEC, RID_TYPEDEF}, - {"register", SCSPEC, RID_REGISTER}, - {"extern", SCSPEC, RID_EXTERN}, - {"for", FOR, NORID}, - {"static", SCSPEC, RID_STATIC}, - {"return", RETURN, NORID}, - {"int", TYPESPEC, RID_INT}, - {"case", CASE, NORID}, - {"const", TYPE_QUAL, RID_CONST}, - {"inline", SCSPEC, RID_INLINE}, - {"continue", CONTINUE, NORID}, - {"unsigned", TYPESPEC, RID_UNSIGNED}, - {"char", TYPESPEC, RID_CHAR}, - {"union", UNION, NORID}, - {"if", IF, NORID} - }; - - static short lookup[] = - { - -1, -1, -1, -1, 0, 1, 2, 3, -1, 4, - -80, 8, 9, 10, 11, 12, 13, 14, 15, 16, - 17, 18, -1, 19, 20, 21, -1, 22, -46, -3, - 23, 24, -1, 25, 26, -1, 27, -1, 28, 29, - -1, 30, 31, 32, 33, 34, 35, 36, 37, -1, - -1, 38, -1, 39, -1, -1, 40, -1, -1, -1, - -1, 41, -1, 42, 43, 44, 45, -1, 46, -1, - -1, -1, -1, 47, 48, -1, -1, -1, -1, -1, - 49, -1, 50 - }; - - if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) - { - register int key = hash (str, len); - - if (key <= MAX_HASH_VALUE && key >= 0) - { - register int index = lookup[key]; - - if (index >= 0) - { - register const char *s = wordlist[index].name; - - if (*str == *s && !strcmp (str + 1, s + 1)) - return &wordlist[index]; - } - else if (index < -TOTAL_KEYWORDS) - { - register int offset = - 1 - TOTAL_KEYWORDS - index; - register struct resword *wordptr = &wordlist[TOTAL_KEYWORDS + lookup[offset]]; - register struct resword *wordendptr = wordptr + -lookup[offset + 1]; - - while (wordptr < wordendptr) - { - register const char *s = wordptr->name; - - if (*str == *s && !strcmp (str + 1, s + 1)) - return wordptr; - wordptr++; - } - } - } - } - return 0; -} diff --git a/contrib/gperf/tests/test-5.exp b/contrib/gperf/tests/test-5.exp deleted file mode 100644 index 8f4d9ab8a62c..000000000000 --- a/contrib/gperf/tests/test-5.exp +++ /dev/null @@ -1,124 +0,0 @@ -/* C code produced by gperf version 2.7 */ -/* Command-line: ../src/gperf -g -o -j1 -t -p -N is_reserved_word */ -/* ISO Pascal 7185 reserved words. - * - * For GNU Pascal compiler (GPC) by jtv@hut.fi - * - * run this through the Doug Schmidt's gperf program - * with command - * gperf -g -o -j1 -t -p -N is_reserved_word - * - */ -struct resword { char *name; short token; short iclass;}; - -#define TOTAL_KEYWORDS 35 -#define MIN_WORD_LENGTH 2 -#define MAX_WORD_LENGTH 9 -#define MIN_HASH_VALUE 2 -#define MAX_HASH_VALUE 43 -/* maximum key range = 42, duplicates = 0 */ - -#ifdef __GNUC__ -__inline -#endif -static unsigned int -hash (str, len) - register const char *str; - register unsigned int len; -{ - static unsigned char asso_values[] = - { - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 18, 29, 14, 6, 7, - 10, 20, 44, 28, 44, 44, 28, 19, 22, 15, - 0, 44, 9, 23, 0, 23, 26, 2, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 0, 0, 13, 44, 30, 44, 44, 44, 0, 25, - 1, 0, 44, 44, 0, 44, 1, 44, 25, 44, - 44, 0, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44, 44, 44, 44, 44, - 44, 44, 44, 44, 44, 44 - }; - return len + asso_values[(unsigned char)str[len - 1]] + asso_values[(unsigned char)str[0]]; -} - -#ifdef __GNUC__ -__inline -#endif -struct resword * -is_reserved_word (str, len) - register const char *str; - register unsigned int len; -{ - static struct resword wordlist[] = - { - {""}, {""}, - {"To", TO, PASCAL_ISO}, - {""}, - {"Type", TYPE, PASCAL_ISO}, - {"Then", THEN, PASCAL_ISO}, - {"Packed", PACKED, PASCAL_ISO}, - {"While", WHILE, PASCAL_ISO}, - {"Do", DO, PASCAL_ISO}, - {"Procedure", PROCEDURE, PASCAL_ISO}, - {"End", END, PASCAL_ISO}, - {"Else", ELSE, PASCAL_ISO}, - {"Downto", DOWNTO, PASCAL_ISO}, - {"For", FOR, PASCAL_ISO}, - {"File", FILE_, PASCAL_ISO}, - {"Record", RECORD, PASCAL_ISO}, - {"Repeat", REPEAT, PASCAL_ISO}, - {"Or", OR, PASCAL_ISO}, - {"Case", CASE, PASCAL_ISO}, - {"Function", FUNCTION, PASCAL_ISO}, - {"Const", CONST, PASCAL_ISO}, - {"And", AND, PASCAL_ISO}, - {"Mod", MOD, PASCAL_ISO}, - {"Array", ARRAY, PASCAL_ISO}, - {"Goto", GOTO, PASCAL_ISO}, - {"Nil", NIL, PASCAL_ISO}, - {"Not", NOT, PASCAL_ISO}, - {"Set", SET, PASCAL_ISO}, - {"Until", UNTIL, PASCAL_ISO}, - {"Var", VAR, PASCAL_ISO}, - {"Of", OF, PASCAL_ISO}, - {"In", IN, PASCAL_ISO}, - {"Program",PROGRAM,PASCAL_ISO}, - {"Label", LABEL, PASCAL_ISO}, - {"Div", DIV, PASCAL_ISO}, - {"Begin", BEGIN_, PASCAL_ISO}, - {"With", WITH, PASCAL_ISO}, - {""}, {""}, {""}, {""}, {""}, {""}, - {"If", IF, PASCAL_ISO} - }; - - if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) - { - register int key = hash (str, len); - - if (key <= MAX_HASH_VALUE && key >= 0) - { - register const char *s = wordlist[key].name; - - if (*str == *s && !strcmp (str + 1, s + 1)) - return &wordlist[key]; - } - } - return 0; -} diff --git a/contrib/gperf/tests/test-6.exp b/contrib/gperf/tests/test-6.exp deleted file mode 100644 index 3521f13c41c4..000000000000 --- a/contrib/gperf/tests/test-6.exp +++ /dev/null @@ -1,119 +0,0 @@ -GNU `gperf' generates perfect hash functions. - -Usage: ../src/gperf [OPTION]... [INPUT-FILE] - -If a long option shows an argument as mandatory, then it is mandatory -for the equivalent short option also. - -Input file interpretation: - -e, --delimiters=DELIMITER-LIST - Allow user to provide a string containing delimiters - used to separate keywords from their attributes. - Default is ",\n". - -t, --struct-type Allows the user to include a structured type - declaration for generated code. Any text before %% - is considered part of the type declaration. Key - words and additional fields may follow this, one - group of fields per line. - -Language for the output code: - -L, --language=LANGUAGE-NAME - Generates code in the specified language. Languages - handled are currently C++, ANSI-C, C, and KR-C. The - default is C. - -Details in the output code: - -K, --slot-name=NAME Select name of the keyword component in the keyword - structure. - -H, --hash-fn-name=NAME - Specify name of generated hash function. Default is - `hash'. - -N, --lookup-fn-name=NAME - Specify name of generated lookup function. Default - name is `in_word_set'. - -Z, --class-name=NAME Specify name of generated C++ class. Default name is - `Perfect_Hash'. - -7, --seven-bit Assume 7-bit characters. - -c, --compare-strncmp Generate comparison code using strncmp rather than - strcmp. - -C, --readonly-tables Make the contents of generated lookup tables - constant, i.e., readonly. - -E, --enum Define constant values using an enum local to the - lookup function rather than with defines. - -I, --includes Include the necessary system include file <string.h> - at the beginning of the code. - -G, --global Generate the static table of keywords as a static - global variable, rather than hiding it inside of the - lookup function (which is the default behavior). - -W, --word-array-name=NAME - Specify name of word list array. Default name is - `wordlist'. - -S, --switch=COUNT Causes the generated C code to use a switch - statement scheme, rather than an array lookup table. - This can lead to a reduction in both time and space - requirements for some keyfiles. The COUNT argument - determines how many switch statements are generated. - A value of 1 generates 1 switch containing all the - elements, a value of 2 generates 2 tables with 1/2 - the elements in each table, etc. If COUNT is very - large, say 1000000, the generated C code does a - binary search. - -T, --omit-struct-type - Prevents the transfer of the type declaration to the - output file. Use this option if the type is already - defined elsewhere. - -Algorithm employed by gperf: - -k, --key-positions=KEYS - Select the key positions used in the hash function. - The allowable choices range between 1-126, inclusive. - The positions are separated by commas, ranges may be - used, and key positions may occur in any order. - Also, the meta-character '*' causes the generated - hash function to consider ALL key positions, and $ - indicates the ``final character'' of a key, e.g., - $,1,2,4,6-10. - -l, --compare-strlen Compare key lengths before trying a string - comparison. This helps cut down on the number of - string comparisons made during the lookup. - -D, --duplicates Handle keywords that hash to duplicate values. This - is useful for certain highly redundant keyword sets. - -f, --fast=ITERATIONS Generate the gen-perf.hash function ``fast''. This - decreases gperf's running time at the cost of - minimizing generated table size. The numeric - argument represents the number of times to iterate - when resolving a collision. `0' means ``iterate by - the number of keywords''. - -i, --initial-asso=N Provide an initial value for the associate values - array. Default is 0. Setting this value larger helps - inflate the size of the final table. - -j, --jump=JUMP-VALUE Affects the ``jump value'', i.e., how far to advance - the associated character value upon collisions. Must - be an odd number, default is 5. - -n, --no-strlen Do not include the length of the keyword when - computing the hash function. - -o, --occurrence-sort Reorders input keys by frequency of occurrence of - the key sets. This should decrease the search time - dramatically. - -r, --random Utilizes randomness to initialize the associated - values table. - -s, --size-multiple=N Affects the size of the generated hash table. The - numeric argument N indicates ``how many times larger - or smaller'' the associated value range should be, - in relationship to the number of keys, e.g. a value - of 3 means ``allow the maximum associated value to - be about 3 times larger than the number of input - keys.'' Conversely, a value of -3 means ``make the - maximum associated value about 3 times smaller than - the number of input keys. A larger table should - decrease the time required for an unsuccessful - search, at the expense of extra table space. Default - value is 1. - -Informative output: - -h, --help Print this message. - -v, --version Print the gperf version number. - -d, --debug Enables the debugging option (produces verbose - output to the standard error). - -Report bugs to <bug-gnu-utils@gnu.org>. diff --git a/contrib/gperf/tests/test-7.exp b/contrib/gperf/tests/test-7.exp deleted file mode 100644 index c5c942c10d1f..000000000000 --- a/contrib/gperf/tests/test-7.exp +++ /dev/null @@ -1,32 +0,0 @@ -in word set if -in word set do -NOT in word set int -in word set for -in word set case -NOT in word set char -NOT in word set auto -in word set goto -in word set else -NOT in word set long -NOT in word set void -NOT in word set enum -NOT in word set float -NOT in word set short -NOT in word set union -NOT in word set break -in word set while -NOT in word set const -NOT in word set double -NOT in word set static -NOT in word set extern -NOT in word set struct -in word set return -NOT in word set sizeof -NOT in word set switch -NOT in word set signed -NOT in word set typedef -NOT in word set default -NOT in word set unsigned -NOT in word set continue -NOT in word set register -NOT in word set volatile diff --git a/contrib/gperf/tests/validate b/contrib/gperf/tests/validate deleted file mode 100755 index a4813ab3eec1..000000000000 --- a/contrib/gperf/tests/validate +++ /dev/null @@ -1,54 +0,0 @@ -#! /bin/sh -# Validate gperf's operation on a given input file. -# Usage: validate languages input.gperf [more gperf options] -# Uses the environment variables GPERF, CC, CFLAGS, CXX, CXXFLAGS. -# Supposes gcc and g++. - -# Exit on error -set -e - -verbose () { - echo "$@" - "$@" -} - -languages=$1 -shift - -for lang in `echo $languages | sed -e 's/,/ /g'`; do - case "$lang" in - KR-C ) - echo "${GPERF} -I -L KR-C $@ > valitest.c" - ${GPERF} -I -L KR-C "$@" > valitest.c - grep -n ' const ' valitest.c /dev/null && exit 1 - verbose ${CC} ${CFLAGS} -traditional valitest.c -o valitest - ./valitest - verbose ${CC} ${CFLAGS} -ansi -pedantic valitest.c -o valitest - ./valitest - ;; - C ) - echo "${GPERF} -I -L C $@ > valitest.c" - ${GPERF} -I -L C "$@" > valitest.c - verbose ${CC} ${CFLAGS} -traditional -Dconst= valitest.c -o valitest - ./valitest - verbose ${CC} ${CFLAGS} -ansi -pedantic -pedantic-errors valitest.c -o valitest - ./valitest - ;; - ANSI-C ) - echo "${GPERF} -I -L ANSI-C $@ > valitest.c" - ${GPERF} -I -L ANSI-C "$@" > valitest.c - verbose ${CC} ${CFLAGS} -ansi -pedantic -pedantic-errors valitest.c -o valitest - ./valitest - verbose ${CXX} ${CXXFLAGS} -ansi -pedantic -pedantic-errors valitest.c -o valitest - ./valitest - ;; - "C++" ) - echo "${GPERF} -I -L C++ $@ > valitest.c" - ${GPERF} -I -L C++ "$@" > valitest.c - verbose ${CXX} ${CXXFLAGS} -ansi -pedantic -pedantic-errors -DCPLUSPLUS_TEST valitest.c -o valitest - ./valitest - ;; - esac -done - -exit 0 |