Diffstat (limited to 'contrib/ncurses/man/curs_inopts.3x')
1 files changed, 53 insertions, 25 deletions
diff --git a/contrib/ncurses/man/curs_inopts.3x b/contrib/ncurses/man/curs_inopts.3x
index 1fc6a820a603..7b5a17b8f125 100644
@@ -1,5 +1,5 @@
-.\" Copyright (c) 1998 Free Software Foundation, Inc. *
+.\" Copyright (c) 1998-2003,2005 Free Software Foundation, Inc. *
.\" Permission is hereby granted, free of charge, to any person obtaining a *
.\" copy of this software and associated documentation files (the *
@@ -26,17 +26,33 @@
.\" authorization. *
-.\" $Id: curs_inopts.3x,v 1.8 1998/03/11 21:12:53 juergen Exp $
+.\" $Id: curs_inopts.3x,v 1.13 2005/05/15 16:18:07 tom Exp $
.TH curs_inopts 3X ""
-\fBcbreak\fR, \fBnocbreak\fR, \fBecho\fR,
-\fBnoecho\fR, \fBhalfdelay\fR, \fBintrflush\fR, \fBkeypad\fR,
-\fBmeta\fR, \fBnodelay\fR, \fBnotimeout\fR, \fBraw\fR, \fBnoraw\fR,
-\fBnoqiflush\fR, \fBqiflush\fR, \fBtimeout\fR, \fBwtimeout\fR,
\fBtypeahead\fR - \fBcurses\fR input options
@@ -78,14 +94,14 @@ erase/kill character-processing (interrupt and flow control characters are
unaffected), making characters typed by the user immediately available to the
program. The \fBnocbreak\fR routine returns the terminal to normal (cooked)
Initially the terminal may or may not be in \fBcbreak\fR mode, as the mode is
inherited; therefore, a program should call \fBcbreak\fR or \fBnocbreak\fR
explicitly. Most interactive programs using \fBcurses\fR set the \fBcbreak\fR
mode. Note that \fBcbreak\fR overrides \fBraw\fR.
[See \fBcurs_getch\fR(3X) for a
discussion of how these routines interact with \fBecho\fR and \fBnoecho\fR.]
The \fBecho\fR and \fBnoecho\fR routines control whether characters typed by
the user are echoed by \fBgetch\fR as they are typed. Echoing by the tty
driver is always disabled, but initially \fBgetch\fR is in echo mode, so
@@ -95,14 +111,14 @@ they disable echoing by calling \fBnoecho\fR.
[See \fBcurs_getch\fR(3X) for a
discussion of how these routines interact with \fBcbreak\fR and
The \fBhalfdelay\fR routine is used for half-delay mode, which is similar to
\fBcbreak\fR mode in that characters typed by the user are immediately
available to the program. However, after blocking for \fItenths\fR tenths of
seconds, ERR is returned if nothing has been typed. The value of \fBtenths\fR
must be a number between 1 and 255. Use \fBnocbreak\fR to leave half-delay
If the \fBintrflush\fR option is enabled, (\fIbf\fR is \fBTRUE\fR), when an
interrupt key is pressed on the keyboard (interrupt, break, quit) all output in
the tty driver queue will be flushed, giving the effect of faster response to
@@ -110,7 +126,7 @@ the interrupt, but causing \fBcurses\fR to have the wrong idea of what is on
the screen. Disabling (\fIbf\fR is \fBFALSE\fR), the option prevents the
flush. The default for the option is inherited from the tty driver settings.
The window argument is ignored.
The \fBkeypad\fR option enables the keypad of the user's terminal. If
enabled (\fIbf\fR is \fBTRUE\fR), the user can press a function key
(such as an arrow key) and \fBwgetch\fR returns a single value
@@ -121,30 +137,30 @@ itself. If the keypad in the terminal can be turned on (made to
transmit) and off (made to work locally), turning on this option
causes the terminal keypad to be turned on when \fBwgetch\fR is
called. The default value for keypad is false.
Initially, whether the terminal returns 7 or 8 significant bits on
input depends on the control mode of the tty driver [see termio(7)].
To force 8 bits to be returned, invoke \fBmeta\fR(\fIwin\fR,
\fBTRUE\fR); this is equivalent, under POSIX, to setting the CS8 flag
on the terminal. To force 7 bits to be returned, invoke
\fBmeta\fR(\fIwin\fR, \fBFALSE\fR); this is equivalent, under POSIX,
-to setting the CS8 flag on the terminal. The window argument,
+to setting the CS7 flag on the terminal. The window argument,
\fIwin\fR, is always ignored. If the terminfo capabilities \fBsmm\fR
(meta_on) and \fBrmm\fR (meta_off) are defined for the terminal,
\fBsmm\fR is sent to the terminal when \fBmeta\fR(\fIwin\fR,
\fBTRUE\fR) is called and \fBrmm\fR is sent when \fBmeta\fR(\fIwin\fR,
\fBFALSE\fR) is called.
The \fBnodelay\fR option causes \fBgetch\fR to be a non-blocking call.
If no input is ready, \fBgetch\fR returns \fBERR\fR. If disabled
(\fIbf\fR is \fBFALSE\fR), \fBgetch\fR waits until a key is pressed.
While interpreting an input escape sequence, \fBwgetch\fR sets a timer
while waiting for the next character. If \fBnotimeout(\fR\fIwin\fR,
\fBTRUE\fR) is called, then \fBwgetch\fR does not set a timer. The
purpose of the timeout is to differentiate between sequences received
from a function key and those typed by a user.
The \fBraw\fR and \fBnoraw\fR routines place the terminal into or out of raw
mode. Raw mode is similar to \fBcbreak\fR mode, in that characters typed are
immediately passed through to the user program. The differences are that in
@@ -152,7 +168,7 @@ raw mode, the interrupt, quit, suspend, and flow control characters are all
passed through uninterpreted, instead of generating a signal. The behavior of
the BREAK key depends on other bits in the tty driver that are not set by
When the \fBnoqiflush\fR routine is used, normal flush of input and
output queues associated with the \fBINTR\fR, \fBQUIT\fR and
\fBSUSP\fR characters will not be done [see termio(7)]. When
@@ -160,18 +176,18 @@ output queues associated with the \fBINTR\fR, \fBQUIT\fR and
characters are read. You may want to call \fBnoqiflush()\fR in a signal
handler if you want output to continue as though the interrupt
had not occurred, after the handler exits.
The \fBtimeout\fR and \fBwtimeout\fR routines set blocking or
non-blocking read for a given window. If \fIdelay\fR is negative,
-blocking read is used (\fIi\fR.\fIe\fR., waits indefinitely for
+blocking read is used (i.e., waits indefinitely for
input). If \fIdelay\fR is zero, then non-blocking read is used
-(\fIi\fR.\fIe\fR., read returns \fBERR\fR if no input is waiting). If
+(i.e., read returns \fBERR\fR if no input is waiting). If
\fIdelay\fR is positive, then read blocks for \fIdelay\fR
milliseconds, and returns \fBERR\fR if there is still no input.
Hence, these routines provide the same functionality as \fBnodelay\fR,
plus the additional capability of being able to block for only
\fIdelay\fR milliseconds (where \fIdelay\fR is positive).
The \fBcurses\fR library does ``line-breakout optimization'' by looking for
typeahead periodically while updating the screen. If input is found,
and it is coming from a tty, the current update is postponed until
@@ -186,20 +202,32 @@ The \fBtypeahead\fR routine specifies that the file descriptor
All routines that return an integer return \fBERR\fR upon failure and OK (SVr4
specifies only "an integer value other than \fBERR\fR") upon successful
completion, unless otherwise noted in the preceding routine descriptions.
+X/Open does not define any error conditions.
+In this implementation,
+functions with a window parameter will return an error if it is null.
+Any function will also return an error if the terminal was not initialized.
+returns an error
+if its parameter is outside the range 1..255.
These functions are described in the XSI Curses standard, Issue 4.
The ncurses library obeys the XPG4 standard and the historical practice of the
AT&T curses implementations, in that the echo bit is cleared when curses
initializes the terminal state. BSD curses differed from this slightly; it
left the echo bit on at initialization, but the BSD \fBraw\fR call turned it
-off as a side-effect. For best portability, set echo or noecho explicitly
+off as a side-effect. For best portability, set echo or noecho explicitly
just after initialization, even if your program remains in cooked mode.
Note that \fBecho\fR, \fBnoecho\fR, \fBhalfdelay\fR, \fBintrflush\fR,
\fBmeta\fR, \fBnodelay\fR, \fBnotimeout\fR, \fBnoqiflush\fR,
\fBqiflush\fR, \fBtimeout\fR, and \fBwtimeout\fR may be macros.
The \fBnoraw\fR and \fBnocbreak\fR calls follow historical practice in that
they attempt to restore to normal (`cooked') mode from raw and cbreak modes
respectively. Mixing raw/noraw and cbreak/nocbreak calls leads to tty driver